Adds manual compaction trigger; add gc compaction to test_gc_feedback
Part of https://github.com/neondatabase/neon/issues/8002
```
test_gc_feedback[debug-pg15].logical_size: 50 Mb
test_gc_feedback[debug-pg15].physical_size: 2269 Mb
test_gc_feedback[debug-pg15].physical/logical ratio: 44.5302
test_gc_feedback[debug-pg15].max_total_num_of_deltas: 7
test_gc_feedback[debug-pg15].max_num_of_deltas_above_image: 2
test_gc_feedback[debug-pg15].logical_size_after_bottom_most_compaction: 50 Mb
test_gc_feedback[debug-pg15].physical_size_after_bottom_most_compaction: 287 Mb
test_gc_feedback[debug-pg15].physical/logical ratio after bottom_most_compaction: 5.6312
test_gc_feedback[debug-pg15].max_total_num_of_deltas_after_bottom_most_compaction: 4
test_gc_feedback[debug-pg15].max_num_of_deltas_above_image_after_bottom_most_compaction: 1
```
## Summary of changes
* Add the manual compaction trigger
* Use in test_gc_feedback
* Add a guard to avoid running it with retain_lsns
* Fix: Do `schedule_compaction_update` after compaction
* Fix: Supply deltas in the correct order to reconstruct value
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
These APIs have been deprecated for some time, but were still used from
test code.
Closes: https://github.com/neondatabase/neon/issues/4282
## Summary of changes
- It is still convenient to do a "tenant_attach" from a test without
having to write out a location_conf body, so those test methods have
been retained with implementations that call through to their
location_conf equivalent.
Part of #7497, closes#8072.
## Problem
Currently the `get_lsn_by_timestamp` and branch creation pageserver APIs do not provide a pleasant client experience where the looked-up LSN might be GC-ed between the two API calls.
This PR attempts to prevent common races between GC and branch creation by making use of LSN leases provided in #8084. A lease can be optionally granted to a looked-up LSN. With the lease, GC will not touch layers needed to reconstruct all pages at this LSN for the duration of the lease.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
For testing, the storage controller has a built-in hack that loads
neon_local endpoint config from disk, and uses it to reconfigure
endpoints when the attached pageserver changes.
Some tests that stop an endpoint while the storage controller is running
could occasionally fail on log errors from the controller trying to use
its special test-mode calls into neon local Endpoint.
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8117/9592392425/index.html#/testresult/9d2bb8623d0d53f8
## Summary of changes
- Give NotifyError an explicit NeonLocal variant, to avoid munging these
into generic 500s (I don't want to ignore 500s in general)
- Allow-list errors related to the local notification hook.
The expectation is that tests using endpoints/workloads should be
independently checking that those endpoints work: if neon_local
generates an error inside the storage controller, that's ignorable.
In #7957 we enabled deletion without attachment, but retained the
old-style deletion (return 202, delete in background) for attached
tenants. In this PR, we remove the old-style deletion path, such that if
the tenant delete API is invoked while a tenant is detached, it is
simply detached before completing the deletion.
This intentionally doesn't rip out all the old deletion code: in case a
deletion was in progress at time of upgrade, we keep around the code for
finishing it for one release cycle. The rest of the code removal happens
in https://github.com/neondatabase/neon/pull/8091
Now that deletion will always be via the new path, the new path is also
updated to use some retries around remote storage operations, to
tripping up the control plane with 500s if S3 has an intermittent issue.
## Problem
These APIs have be unused for some time. They were superseded by
/location_conf: the equivalent of ignoring a tenant is now to put it in
secondary mode.
## Summary of changes
- Remove APIs
- Remove tests & helpers that used them
- Remove error variants that are no longer needed.
## Problem
We have this set of test utilities which duplicate a tenant by copying
everything that's in remote storage and then attaching a tenant to the
pageserver and storage controller. When the "copied tenants" are created
on the storage controller, they start off from generation number 0. This
means that they can't see anything past that generation.
This issues has existed ever since generation numbers have been
introduced, but we've largely been lucky
for the generation to stay stable during the template tenant creation.
## Summary of Changes
Extend the storage controller debug attach hook to accept a generation
override. Use that in the tenant duplication logic to set the generation
number to something greater than the naturally reached generation. This
allows the tenants to see all layer files.
## Problem
This PR refactors some error handling to avoid log spam on
tenant/timeline shutdown.
- "ignoring failure to find gc cutoffs: timeline shutting down." logs
(https://github.com/neondatabase/neon/issues/8012)
- "synthetic_size_worker: failed to calculate synthetic size for tenant
...: Failed to refresh gc_info before gathering inputs: tenant shutting
down", for example here:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8049/9502988669/index.html#suites/3fc871d9ee8127d8501d607e03205abb/1a074a66548bbcea
Closes: https://github.com/neondatabase/neon/issues/8012
## Summary of changes
- Refactor: Add a PageReconstructError variant to GcError: this is the
only kind of error that find_gc_cutoffs can emit.
- Functional change: only ignore shutdown PageReconstructError variant:
for other variants, treat it as a real error
- Refactor: add a structured CalculateSyntheticSizeError type and use it
instead of anyhow::Error in synthetic size calculations
- Functional change: while iterating through timelines gathering logical
sizes, only drop out if the whole tenant is cancelled: individual
timeline cancellations indicate deletion in progress and we can just
ignore those.
As seen with the pgvector 0.7.0 index builds, we can receive large
batches of images, leading to very large L0 layers in the range of 1GB.
These large layers are produced because we are only able to roll the
layer after we have witnessed two different Lsns in a single
`DataDirModification::commit`. As the single Lsn batches of images can
span over multiple `DataDirModification` lifespans, we will rarely get
to write two different Lsns in a single `put_batch` currently.
The solution is to remember the TimelineWriterState instead of eagerly
forgetting it until we really open the next layer or someone else
flushes (while holding the write_guard).
Additional changes are test fixes to avoid "initdb image layer
optimization" or ignoring initdb layers for assertion.
Cc: #7197 because small `checkpoint_distance` will now trigger the
"initdb image layer optimization"
A simple API to collect some statistics after compaction to easily
understand the result.
The tool reads the layer map, and analyze range by range instead of
doing single-key operations, which is more efficient than doing a
benchmark to collect the result. It currently computes two key metrics:
* Latest data access efficiency, which finds how many delta layers /
image layers the system needs to iterate before returning any key in a
key range.
* (Approximate) PiTR efficiency, as in
https://github.com/neondatabase/neon/issues/7770, which is simply the
number of delta files in the range. The reason behind that is, assume no
image layer is created, PiTR efficiency is simply the cost of collect
records from the delta layers, and the replay time. Number of delta
files (or in the future, estimated size of reads) is a simple yet
efficient way of estimating how much effort the page server needs to
reconstruct a page.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Closes#7406.
## Problem
When a `get_lsn_by_timestamp` request is cancelled, an anyhow error is
exposed to handle that case, which verbosely logs the error. However, we
don't benefit from having the full backtrace provided by anyhow in this
case.
## Summary of changes
This PR introduces a new `ApiError` type to handle errors caused by
cancelled request more robustly.
- A new enum variant `ApiError::Cancelled`
- Currently the cancelled request is mapped to status code 500.
- Need to handle this error in proxy's `http_util` as well.
- Added a failpoint test to simulate cancelled `get_lsn_by_timestamp`
request.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
In all cases, AncestorStopping is equivalent to Cancelled.
This became more obvious in
https://github.com/neondatabase/neon/pull/7912#discussion_r1620582309
when updating these error types.
## Summary of changes
- Remove AncestorStopping, always use Cancelled instead
detaching a timeline from its ancestor can leave the resulting timeline
with more L0 layers than the compaction threshold. most of the time, the
detached timeline has made progress, and next time the L0 -> L1
compaction happens near the original branch point and not near the
last_record_lsn.
add a test to ensure that inheriting the historical L0s does not change
fullbackup. additionally:
- add `wait_until_completed` to test-only timeline checkpoint and
compact HTTP endpoints. with `?wait_until_completed=true` the endpoints
will wait until the remote client has completed uploads.
- for delta layers, describe L0-ness with the `/layer` endpoint
Cc: #6994
## Problem
Currently tenants are only split into multiple shards if a human being
calls the API to do it.
Issue: #7388
## Summary of changes
- Add a pageserver API for returning the top tenants by size
- Add a step to the controller's background loop where if there is no
reconciliation or optimization to be done, it looks for things to split.
- Add a test that runs pgbench on many tenants concurrently, and checks
that splitting happens as expected as tenants grow, without interrupting
the client I/O.
This PR is quite basic: there is a tasklist in
https://github.com/neondatabase/neon/issues/7388 for further work. This
PR is meant to be safe (off by default), and sufficient to enable our
staging environment to run lots of sharded tenants without a human
having to set them up.
- Rename "filename" types which no longer map directly to a filename
(LayerFileName -> LayerName)
- Add a -v1- part to local layer paths to smooth the path to future
updates (we anticipate a -v2- that uses checksums later)
- Rename methods that refer to the string-ized version of a LayerName to
no longer be called "filename"
- Refactor reconcile() function to use a LocalLayerFileMetadata type
that includes the local path, rather than carrying local path separately
in a tuple and unwrap()'ing it later.
## Problem
In https://github.com/neondatabase/neon/pull/7531, we would like to be
able to rewrite layers safely. One option is to make `Layer` able to
rewrite files in place safely (e.g. by blocking evictions/deletions for
an old Layer while a new one is created), but that's relatively fragile.
It's more robust in general if we simply never overwrite the same local
file: we can do that by putting the generation number in the filename.
## Summary of changes
- Add `local_layer_path` (counterpart to `remote_layer_path`) and
convert all locations that manually constructed a local layer path by
joining LayerFileName to timeline path
- In the layer upload path, construct remote paths with
`remote_layer_path` rather than trying to build them out of a local
path.
- During startup, carry the full path to layer files through
`init::reconcile`, and pass it into `Layer::for_resident`
- Add a test to make sure we handle upgrades properly.
- Comment out the generation part of `local_layer_path`, since we need
to maintain forward compatibility for one release. A tiny followup PR
will enable it afterwards.
We could make this a bit simpler if we bulk renamed existing layers on
startup instead of carrying literal paths through init, but that is
operationally risky on existing servers with millions of layer files. We
can always do a renaming change in future if it becomes annoying, but
for the moment it's kind of nice to have a structure that enables us to
change local path names again in future quite easily.
We should rename `LayerFileName` to `LayerName` or somesuch, to make it
more obvious that it's not a literal filename: this was already a bit
confusing where that type is used in remote paths. That will be a
followup, to avoid polluting this PR's diff.
## Problem
Timelines cannot be deleted if they have children. In many production
cases, a branch or a timeline has been created off the main branch for
various reasons to the effect of having now a "new main" branch. This
feature will make it possible to detach a timeline from its ancestor by
inheriting all of the data before the branchpoint to the detached
timeline and by also reparenting all of the ancestor's earlier branches
to the detached timeline.
## Summary of changes
- Earlier added copy_lsn_prefix functionality is used
- RemoteTimelineClient learns to adopt layers by copying them from
another timeline
- LayerManager adds support for adding adopted layers
-
`timeline::Timeline::{prepare_to_detach,complete_detaching}_from_ancestor`
and `timeline::detach_ancestor` are added
- HTTP PUT handler
Cc: #6994
Co-authored-by: Christian Schwarz <christian@neon.tech>
Changes parameters to fix the flakiness of `test_ts_of_lsn_api`. Already
now, the amount of flakiness of the test is pretty low. With this, it's
even lower.
cc #5768
## Problem
When a location_conf request was repeated with no changes, we failed to
build the list of shards in the result.
## Summary of changes
Remove conditional that only generated a list of updates if something
had really changed. This does some redundant database updates, but it is
preferable to having a whole separate code path for no-op changes.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
(Follows https://github.com/neondatabase/neon/pull/7237)
Some API users will query a tenant to wait for it to activate.
Currently, we return the current status of the tenant, whatever that may
be. Under heavy load, a pageserver starting up might take a long time to
activate such a tenant.
## Summary of changes
- In `tenant_status` handler, call wait_to_become_active on the tenant.
If the tenant is currently waiting for activation, this causes it to
skip the queue, similiar to other API handlers that require an active
tenant, like timeline creation. This avoids external services waiting a
long time for activation when polling GET /v1/tenant/<id>.
## Problem
https://github.com/neondatabase/neon/pull/7227 destabilized various
tests in the performance suite, with log errors during shutdown. It's
because we switched shutdown order to stop the storage controller before
the pageservers.
## Summary of changes
- Tolerate "connection failed" errors from pageservers trying to
validation their deletion queue.
## Problem
Large quantities of ephemeral layer data can lead to excessive memory
consumption (https://github.com/neondatabase/neon/issues/6939). We
currently don't have a way to know how much ephemeral layer data is
present on a pageserver.
Before we can add new behaviors to proactively roll layers in response
to too much ephemeral data, we must calculate that total.
Related: https://github.com/neondatabase/neon/issues/6916
## Summary of changes
- Create GlobalResources and GlobalResourceUnits types, where timelines
carry a GlobalResourceUnits in their TimelineWriterState.
- Periodically update the size in GlobalResourceUnits:
- During tick()
- During layer roll
- During put() if the latest value has drifted more than 10MB since our
last update
- Expose the value of the global ephemeral layer bytes counter as a
prometheus metric.
- Extend the lifetime of TimelineWriterState:
- Instead of dropping it in TimelineWriter::drop, let it remain.
- Drop TimelineWriterState in roll_layer: this drops our guard on the
global byte count to reflect the fact that we're freezing the layer.
- Ensure the validity of the later in the writer state by clearing the
state in the same place we freeze layers, and asserting on the
write-ability of the layer in `writer()`
- Add a 'context' parameter to `get_open_layer_action` so that it can
skip the prev_lsn==lsn check when called in tick() -- this is needed
because now tick is called with a populated state, where
prev_lsn==Some(lsn) is true for an idle timeline.
- Extend layer rolling test to use this metric
- Remove code for using AWS secrets manager, as we're deploying with
k8s->env vars instead
- Load each secret independently, so that one can mix CLI args with
environment variables, rather than requiring that all secrets are loaded
with the same mechanism.
- Add a 'strict mode', enabled by default, which will refuse to start if
secrets are not loaded. This avoids the risk of accidentially disabling
auth by omitting the public key, for example
## Problem
As with the pageserver, we should fail tests that emit unexpected log
errors/warnings.
## Summary of changes
- Refactor existing log checks to be reusable
- Run log checks for attachment_service
- Add allow lists as needed.
## Problem
The existing secondary download API relied on the caller to wait as long
as it took to complete -- for large shards that could be a long time, so
typical clients that might have a baked-in ~30s timeout would have a
problem.
## Summary of changes
- Take a `wait_ms` query parameter to instruct the pageserver how long
to wait: if the download isn't complete in this duration, then 201 is
returned instead of 200.
- For both 200 and 201 responses, include response body describing
download progress, in terms of layers and bytes. This is sufficient for
the caller to track how much data is being transferred and log/present
that status.
- In storage controller live migrations, use this API to apply a much
longer outer timeout, with smaller individual per-request timeouts, and
log the progress of the downloads.
- Add a test that injects layer download delays to exercise the new
behavior
Switched the order; doing https://github.com/neondatabase/neon/pull/6139
first then can remove uninit marker after.
## Problem
Previously, existence of a timeline directory was treated as evidence of
the timeline's logical existence. That is no longer the case since we
treat remote storage as the source of truth on each startup: we can
therefore do without this mark file.
The mark file had also been used as a pseudo-lock to guard against
concurrent creations of the same TimelineId -- now that persistence is
no longer required, this is a bit unwieldy.
In #6139 the `Tenant::timelines_creating` was added to protect against
concurrent creations on the same TimelineId, making the uninit mark file
entirely redundant.
## Summary of changes
- Code that writes & reads mark file is removed
- Some nearby `pub` definitions are amended to `pub(crate)`
- `test_duplicate_creation` is added to demonstrate that mutual
exclusion of creations still works.
## Summary
- Currently we can set stripe size at tenant creation, but it doesn't
mean anything until we have multiple shards
- When onboarding an existing tenant, it will always get a default shard
stripe size, so we would like to be able to pick the actual stripe size
at the point we split.
## Why do this inline with a split?
The alternative to this change would be to have a separate endpoint on
the storage controller for setting the stripe size on a tenant, and only
permit writes to that endpoint when the tenant has only a single shard.
That would work, but be a little bit more work for a client, and not
appreciably simpler (instead of having a special argument to the split
functions, we'd have a special separate endpoint, and a requirement that
the controller must sync its config down to the pageserver before
calling the split API). Either approach would work, but this one feels a
bit more robust end-to-end: the split API is the _very last moment_ that
the stripe size is mutable, so if we aim to set it before splitting, it
makes sense to do it as part of the same operation.
Not a user-facing change, but can break any existing `.neon` directories
created by neon_local, as the name of the database used by the storage
controller changes.
This PR changes all the locations apart from the path of
`control_plane/attachment_service` (waiting for an opportune moment to
do that one, because it's the most conflict-ish wrt ongoing PRs like
#6676 )
## Problem
https://github.com/neondatabase/neon/pull/6661 changed the layer
flushing logic and led to OOMs in staging.
The issue turned out to be holding on to in-memory layers for too long.
After OOMing we'd need to replay potentially
a lot of WAL.
## Summary of changes
Test that open layers get flushed after the `checkpoint_timeout` config
and do not require WAL reingest upon restart.
The workload creates a number of timelines and writes some data to each,
but not enough to trigger flushes via the `checkpoint_distance` config.
I ran this test against https://github.com/neondatabase/neon/pull/6661
and it was indeed failing.
Extracted from https://github.com/neondatabase/neon/pull/6953
Part of https://github.com/neondatabase/neon/issues/5899
Core Change
-----------
In #6953, we need the ability to scan the log _after_ a specific line
and ignore anything before that line.
This PR changes `log_contains` to returns a tuple of `(matching line,
cursor)`.
Hand that cursor to a subsequent `log_contains` call to search the log
for the next occurrence of the pattern.
Other Changes
-------------
- Inspect all the callsites of `log_contains` to handle the new tuple
return type.
- Above inspection unveiled many callers aren't using `assert
log_contains(...) is not None` but some weaker version of the code that
breaks if `log_contains` ever returns a not-None but falsy value. Fix
that.
- Above changes unveiled that `test_remote_storage_upload_queue_retries`
was using `wait_until` incorrectly; after fixing the usage, I had to
raise the `wait_until` timeout. So, maybe this will fix its flakiness.
Add off-by-default support for lazy queued tenant activation on attach.
This should be useful on bulk migrations as some tenants will be
activated faster due to operations or endpoint startup. Eventually all
tenants will get activated by reusing the same mechanism we have at
startup (`PageserverConf::concurrent_tenant_warmup`).
The difference to lazy attached tenants to startup ones is that we leave
their initial logical size calculation be triggered by WalReceiver or
consumption metrics.
Fixes: #6315
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
fixes https://github.com/neondatabase/neon/issues/6889
# Problem
The failure in the last 3 flaky runs on `main` is
```
test_runner/regress/test_remote_storage.py:460: in test_remote_timeline_client_calls_started_metric
churn("a", "b")
test_runner/regress/test_remote_storage.py:457: in churn
assert gc_result["layers_removed"] > 0
E assert 0 > 0
```
That's this code
cd449d66ea/test_runner/regress/test_remote_storage.py (L448-L460)
So, the test expects GC to remove some layers but the GC doesn't.
# Fix
My impression is that the VACUUM isn't re-using pages aggressively
enough, but I can't really prove that. Tried to analyze the layer map
dump but it's too complex.
So, this PR:
- Creates more churn by doing the overwrite twice.
- Forces image layer creation.
It also drive-by removes the redundant call to timeline_compact,
because, timeline_checkpoint already does that internally.
- Add some context to logs
- Add tests for pageserver restarts when managed by storage controller
- Make /location_config tolerate compute hook failures on shard
creations, not just modifications.
## Problem
PR #6834 introduced an assertion that the sets of metric labels on
finished operations should equal those on started operations, which is
not true if no operations have finished yet for a particular set of
labels.
## Summary of changes
- Instead of asserting out, wait and re-check in the case that finished
metrics don't match started
The sharding service didn't have support for S3 disaster recovery.
This PR adds a new endpoint to the attachment service, which is slightly
different from the endpoint on the pageserver, in that it takes the
shard count history of the tenant as json parameters: we need to do
time travel recovery for both the shard count at the target time and the
shard count at the current moment in time, as well as the past shard
counts that either still reference.
Fixes#6604, part of https://github.com/neondatabase/cloud/issues/8233
---------
Co-authored-by: John Spray <john@neon.tech>
refs #6737
# Problem
Before this PR, on-demand downloads weren't measured per tenant_id.
This makes root-cause analysis of latency spikes harder, requiring us to
resort to log scraping for
```
{neon_service="pageserver"} |= `downloading on-demand` |= `$tenant_id`
```
which can be expensive when zooming out in Grafana.
Context: https://neondb.slack.com/archives/C033RQ5SPDH/p1707809037868189
# Solution / Changes
- Remove the calls_started histogram
- I did the dilegence, there are only 2 dashboards using this histogram,
and in fact only one uses it as a histogram, the other just as a
a counter.
- [Link
1](8115b54d9f/neonprod/dashboards/hkXNF7oVz/dashboard-Z31XmM24k.yaml (L1454)):
`Pageserver Thrashing` dashboard, linked from playbook, will fix.
- [Link
2](8115b54d9f/neonprod/dashboards/CEllzAO4z/dashboard-sJqfNFL4k.yaml (L599)):
one of my personal dashboards, unused for a long time, already broken in
other ways, no need to fix.
- replace `pageserver_remote_timeline_client_calls_unfinished` gauge
with a counter pair
- Required `Clone`-able `IntCounterPair`, made the necessary changes in
the `libs/metrics` crate
- fix tests to deal with the fallout
A subsequent PR will remove a timeline-scoped metric to compensate.
Note that we don't need additional global counters for the per-timeline
counters affected by this PR; we can use the `remote_storage` histogram
for those, which, conveniently, also include the secondary-mode
downloads, which aren't covered by the remote timeline client metrics
(should they?).
## Problem
When investigating test failures
(https://github.com/neondatabase/neon/issues/6813) I noticed we were
doing a bunch of Reconciler runs right after splitting a tenant.
It's because the splitting test does a pageserver restart, and there was
a bug in /re-attach handling, where we would update the generation
correctly in the database and intent state, but not observed state,
thereby triggering a reconciliation on the next call to maybe_reconcile.
This didn't break anything profound (underlying rules about generations
were respected), but caused the storage controller to do an un-needed
extra round of bumping the generation and reconciling.
## Summary of changes
- Start adding metrics to the storage controller
- Assert on the number of reconciles done in test_sharding_split_smoke
- Fix /re-attach to update `observed` such that we don't spuriously
re-reconcile tenants.
Often times the tenants we want to (WAL) DR are the ones which the
pageserver marks as broken. Therefore, we should allow initdb
preservation also for broken tenants.
Fixes#6781.
## Problem
One WAL record can actually produce an arbitrary amount of key value pairs.
This is problematic since it might cause our frozen layers to bloat past the
max allowed size of S3 single shot uploads.
[#6639](https://github.com/neondatabase/neon/pull/6639) introduced a "should roll"
check after every batch of `ingest_batch_size` (100 WAL records by default). This helps,
but the original problem still exists.
## Summary of changes
This patch moves the responsibility of rolling the currently open layer
to the `TimelineWriter`. Previously, this was done ad-hoc via calls
to `check_checkpoint_distance`. The advantages of this approach are:
* ability to split one batch over multiple open layers
* less layer map locking
* remove ad-hoc check_checkpoint_distance calls
More specifically, we track the current size of the open layer in the
writer. On each `put` check whether the current layer should be closed
and a new one opened. Keeping track of the currently open layer results
in less contention on the layer map lock. It only needs to be acquired
on the first write and on writes that require a roll afterwards.
Rolling the open layer can be triggered by:
1. The distance from the last LSN we rolled at. This bounds the amount
of WAL that the safekeepers need to store.
2. The size of the currently open layer.
3. The time since the last roll. It helps safekeepers to regard
pageserver as caught up and suspend activity.
Closes#6624
in `test_statvfs_pressure_{usage,min_avail_bytes}` we now race against
initial logical size calculation on-demand downloading the layers. first
wait out the initial logical sizes, then change the final asserts to be
"eventual", which is not great but it is faster than failing and
retrying.
this issue seems to happen only in debug mode tests.
Fixes: #6510
Adds an endpoint to the pageserver to S3-recover an entire tenant to a
specific given timestamp.
Required input parameters:
* `travel_to`: the target timestamp to recover the S3 state to
* `done_if_after`: a timestamp that marks the beginning of the recovery
process. retries of the query should keep this value constant. it *must*
be after `travel_to`, and also after any changes we want to revert, and
must represent a point in time before the endpoint is being called, all
of these time points in terms of the time source used by S3. these
criteria need to hold even in the face of clock differences, so I
recommend waiting a specific amount of time, then taking
`done_if_after`, then waiting some amount of time again, and only then
issuing the request.
Also important to note: the timestamps in S3 work at second accuracy, so
one needs to add generous waits before and after for the process to work
smoothly (at least 2-3 seconds).
We ignore the added test for the mocked S3 for now due to a limitation
in moto: https://github.com/getmoto/moto/issues/7300 .
Part of https://github.com/neondatabase/cloud/issues/8233
