## Problem
We switched `h2` from 4.1.0 to a git commit to fix stubgen (in
https://github.com/neondatabase/neon/pull/10491). `h2` 4.2.0 was
released soon after that, so we can switch back to a pinned version.
Expected no changes, as 4.2.0 is the right next commit after the commit
we currently use:
dacd614fed%5E
## Summary of changes
- Bump `h2` to 4.2.0
## Problem
`TYPE_CHECKING` is used inconsistently across Python tests.
## Summary of changes
- Update `ruff`: 0.7.0 -> 0.11.2
- Enable TC (flake8-type-checking):
https://docs.astral.sh/ruff/rules/#flake8-type-checking-tc
- (auto)fix all new issues
## Problem
Python's `jsonnet` 0.20.0 doesn't support Python 3.13, so we have a
couple of tests xfailed because of that.
## Summary of changes
- Bump `jsonnet` to `0.21.0rc2` which supports Python 3.13
- Unxfail `test_sql_exporter_metrics_e2e` and
`test_sql_exporter_metrics_smoke` on Python 3.13
## Problem
There are a bunch of minor improvements that are too small and
insignificant as is, so collecting them in one PR.
## Summary of changes
- Add runner arch to artifact name to make it easier to distinguish
files on S3
([ref](https://neondb.slack.com/archives/C059ZC138NR/p1739365938371149))
- Use `github.event.pull_request.number` instead of parsing
`$GITHUB_EVENT_PATH` file
- Update Allure CLI and `allure-pytest`
## Problem
Sometimes, a regression test run gets stuck (taking more than 60
minutes) and is killed by GitHub's `timeout-minutes` without leaving any
traces in the test results database.
I find no correlation between this and either the build type, the
architecture, or the Postgres version.
See: https://neonprod.grafana.net/goto/nM7ih7cHR?orgId=1
## Summary of changes
- Bump `pytest-timeout` to the version that supports `--session-timeout`
- Set `--session-timeout` to (timeout-minutes - 10 minutes) * 60 seconds
in Attempt to stop tests gracefully to generate test reports until they
are forcibly stopped by the stricter `timeout-minutes` limit.
## Problem
It's impossible to run regression tests with Python 3.13 as some
dependencies don't support it (some of them are outdated, and `jsonnet`
doesn't support it at all yet)
## Summary of changes
- Update dependencies for Python 3.13
- Install `jsonnet` only on Python < 3.13 and skip relevant tests on
Python 3.13
Closes#10237
## Problem
Currently, we rerun only known flaky tests. This approach was chosen to
reduce the number of tests that go unnoticed (by forcing people to take
a look at failed tests and rerun the job manually), but it has some
drawbacks:
- In PRs, people tend to push new changes without checking failed tests
(that's ok)
- In the main, tests are just restarted without checking
(understandable)
- Parametrised tests become flaky one by one, i.e. if `test[1]` is flaky
`, test[2]` is not marked as flaky automatically (which may or may not
be the case).
I suggest rerunning all failed tests to increase the stability of GitHub
jobs and using the Grafana Dashboard with flaky tests for deeper
analysis.
## Summary of changes
- Rerun all failed tests twice at max
## Problem
We use a pretty old version of `mypy` 1.3 (released 1.5 years ago), it
produces false positives for `typing.Self`.
## Summary of changes
- Bump `mypy` from 1.3 to 1.13
- Fix new warnings and errors
- Use `typing.Self` whenever we `return self`
## Problem
On Debian 12 (Bookworm), Python 3.11 is the latest available version.
## Summary of changes
- Update Python to 3.11 in build-tools
- Fix ruff check / format
- Fix mypy
- Use `StrEnum` instead of pair `str`, `Enum`
- Update docs
python based regression test setup for auth_broker. This uses a http
mock for cplane as well as the JWKs url.
complications:
1. We cannot just use local_proxy binary, as that requires the
pg_session_jwt extension which we don't have available in the current
test suite
2. We cannot use just any old http mock for local_proxy, as auth_broker
requires http2 to local_proxy
as such, I used the h2 library to implement an echo server - copied from
the examples in the h2 docs.
## Problem
```
Warning: The file chosen for install of requests 2.32.0 (requests-2.32.0-py3-none-any.whl) is yanked. Reason for being yanked: Yanked due to conflicts with CVE-2024-35195 mitigation
```
## Summary of changes
- Update `requests` to fix the warning
- Update `psycopg2-binary`
## Problem
We need to test the logical replication with some external consumers.
## Summary of changes
A test of the logical replication with Debezium as a consumer was added.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
We don't use it for packaging, and 'poetry install' will soon error
otherwise. Also remove name and version fields as these are not required for
non-packaging mode.
## Problem
We need to test logical replication with 3rd-party tools regularly.
## Summary of changes
Added a test using ClickHouse as a client
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We want to regularly verify the performance of pgvector HNSW parallel
index builds and parallel similarity search using HNSW indexes.
The first release that considerably improved the index-build parallelism
was pgvector 0.7.0 and we want to make sure that we do not regress by
our neon compute VM settings (swap, memory over commit, pg conf etc.)
## Summary of changes
Prepare a Neon project with 1 million openAI vector embeddings (vector
size 1536).
Run HNSW indexing operations in the regression test for the various
distance metrics.
Run similarity queries using pgbench with 100 concurrent clients.
I have also added the relevant metrics to the grafana dashboards pgbench
and olape
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We have no regression tests for websocket flow
## Summary of changes
Add a hacky implementation of the postgres protocol over websockets just
to verify the protocol behaviour does not regress over time.
## Problem
A set of small changes that are too small to open a separate for each.
A notable change is adding `pytest-repeat` plugin, which can help to
ensure that a flaky test is fixed by running such a test several times.
## Summary of changes
- Update Allure from 2.24.0 to 2.27.0
- Update Ruff from 0.1.11 to 0.2.2 (update `[tool.ruff]` section of
`pyproject.toml` for it)
- Install pytest-repeat plugin
## Problem
Proxy already supported HTTP2, but I expect no one is using it because
we don't advertise it in the TLS handshake.
## Summary of changes
#6335 without the websocket changes.
## Problem
`black` is slow sometimes, we can replace it with `ruff format` (a new
feature in 0.1.2 [0]), which produces pretty similar to black style [1].
On my local machine (MacBook M1 Pro 16GB):
```
# `black` on main
$ hyperfine "BLACK_CACHE_DIR=/dev/null poetry run black ."
Benchmark 1: BLACK_CACHE_DIR=/dev/null poetry run black .
Time (mean ± σ): 3.131 s ± 0.090 s [User: 5.194 s, System: 0.859 s]
Range (min … max): 3.047 s … 3.354 s 10 runs
```
```
# `ruff format` on the current PR
$ hyperfine "RUFF_NO_CACHE=true poetry run ruff format"
Benchmark 1: RUFF_NO_CACHE=true poetry run ruff format
Time (mean ± σ): 300.7 ms ± 50.2 ms [User: 259.5 ms, System: 76.1 ms]
Range (min … max): 267.5 ms … 420.2 ms 10 runs
```
## Summary of changes
- Replace `black` with `ruff format` everywhere
- [0] https://docs.astral.sh/ruff/formatter/
- [1] https://docs.astral.sh/ruff/formatter/#black-compatibility
## Problem
The version of pytest we were using emits a number of
DeprecationWarnings on latest python: these are fixed in latest release.
boto3 and python-dateutil also have deprecation warnings, but
unfortunately these aren't fixed upstream yet.
## Summary of changes
- Update pytest
- Update boto3 (this doesn't fix deprecation warnings, but by the time I
figured that out I had already done the update, and it's good hygiene
anyway)
## Problem
While investigating https://github.com/neondatabase/neon/issues/5854, we
hypothesised that logs/repo-dir from the initial failure might leak into
reruns. Use different directories for each run to avoid such a
possibility.
## Summary of changes
- make each test rerun use different directories
- update `pytest-rerunfailure` plugin from 11.1.2 to 13.0
## Problem
- Because we compress artifacts file by file, we don't need to put them
into `tar` containers (ie instead of `tar.gz` we can use just `gz`).
- Pythons gz single-threaded and pretty slow.
A benchmark has shown ~20 times speedup (19.876176291 vs
0.8748335830000009) on my laptop (for a pageserver.log size is 1.3M)
## Summary of changes
- Replace tarfile with zstandart
- Update allure to 2.24.0
