## Problem
Follow up of https://github.com/neondatabase/neon/pull/12620
Discussions:
https://databricks.slack.com/archives/C09254R641L/p1752677940697529
The original code and after the patch above we converts 404s to 503s
regardless of the type of 404. We should only do that for tenant not
found errors. For other 404s like timeline not found, we should not
prompt clients to retry.
## Summary of changes
- Inspect the response body to figure out the type of 404. If it's a
tenant not found error, return 503.
- Otherwise, fallthrough and return 404 as-is.
- Add `tenant_shard_remote_mutation` that manipulates a single shard.
- Use `Service::tenant_shard_remote_mutation` for tenant shard
passthrough requests. This prevents us from another race that the attach
state changes within the request. (This patch mainly addresses the case
that the tenant is "not yet attached").
- TODO: lease API is still using the old code path. We should refactor
it to use `tenant_remote_mutation`.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
# TLDR
All changes are no-op except some metrics.
## Summary of changes I
### Pageserver
Added a new global counter metric
`pageserver_pagestream_handler_results_total` that categorizes
pagestream request results according to their outcomes:
1. Success
2. Internal errors
3. Other errors
Internal errors include:
1. Page reconstruction error: This probably indicates a pageserver
bug/corruption
2. LSN timeout error: Could indicate overload or bugs with PS's ability
to reach other components
3. Misrouted request error: Indicates bugs in the Storage Controller/HCC
Other errors include transient errors that are expected during normal
operation or errors indicating bugs with other parts of the system
(e.g., malformed requests, errors due to cancelled operations during PS
shutdown, etc.)
## Summary of changes II
This PR adds a pageserver endpoint and its counterpart in storage
controller to list visible size of all tenant shards. This will be a
prerequisite of the tenant rebalance command.
## Problem III
We need a way to download WAL
segments/layerfiles from S3 and replay WAL records. We cannot access
production S3 from our laptops directly, and we also can't transfer any
user data out of production systems for GDPR compliance, so we need
solutions.
## Summary of changes III
This PR adds a couple of tools to support the debugging
workflow in production:
1. A new `pagectl download-remote-object` command that can be used to
download remote storage objects assuming the correct access is set up.
## Summary of changes IV
This PR adds a command to list all visible delta and image layers from
index_part. This is useful to debug compaction issues as index_part
often contain a lot of covered layers due to PITR.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
## Problem
Safekeeper and pageserver metrics collection might time out. We've seen
this in both hadron and neon.
## Summary of changes
This PR moves metrics collection in PS/SK to the background so that we
will always get some metrics, despite there may be some delays. Will
leave it to the future work to reduce metrics collection time.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
Follow up of #12400
## Summary of changes
We didn't set remote_size_mb to Some when initialized so it never gets
computed :(
Also added a new API to force refresh the properties.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Part of #11813
## Summary of changes
Add a test API to make it easier to manipulate the feature flags within
tests.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Importing timelines can't currently be deleted. This is problematic
because:
1. Cplane cannot delete failed imports and we leave the timeline behind.
2. The flow does not support user driven cancellation of the import
## Summary of changes
On the pageserver: I've taken the path of least resistance, extended
`TimelineOrOffloaded`
with a new variant and added handling in the right places. I'm open to
thoughts here,
but I think it turned out better than I was envisioning.
On the storage controller: Again, fairly simple business: when a DELETE
timeline request is
received, we remove the import from the DB and stop any finalization
tasks/futures. In order
to stop finalizations, we track them in-memory. For each finalizing
import, we associate a gate
and a cancellation token.
Note that we delete the entry from the database before cancelling any
finalizations. This is such
that a concurrent request can't progress the import into finalize state
and race with the deletion.
This concern about deleting an import with on-going finalization is
theoretical in the near future.
We are only going to delete importing timelines after the storage
controller reports the failure to
cplane. Alas, the design works for user driven cancellation too.
Closes https://github.com/neondatabase/neon/issues/11897
## Problem
close https://github.com/neondatabase/neon/issues/11279
## Summary of changes
* Allow passthrough of other methods in tenant timeline shard0
passthrough of storcon.
* Passthrough mark invisible API in storcon.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`TYPE_CHECKING` is used inconsistently across Python tests.
## Summary of changes
- Update `ruff`: 0.7.0 -> 0.11.2
- Enable TC (flake8-type-checking):
https://docs.astral.sh/ruff/rules/#flake8-type-checking-tc
- (auto)fix all new issues
## Problem
close https://github.com/neondatabase/neon/issues/10310
## Summary of changes
This patch adds a new behavior for the detach_ancestor API: detach with
multi-level ancestor and no reparenting. Though we can potentially
support multi-level + do reparenting / single-level + no-reparenting in
the future, as it's not required for the recovery/snapshot epic, I'd
prefer keeping things simple now that we only handle the old one and the
new one instead of supporting the full feature matrix.
I only added a test case of successful detaching instead of testing
failures. I'd like to make this into staging and add more tests in the
future.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
As part of the disaster recovery tool. Partly for
https://github.com/neondatabase/neon/issues/9114.
## Summary of changes
* Add a new pageserver API to force patch the fields in index_part and
modify the timeline internal structures.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
https://github.com/neondatabase/neon/issues/9965
## Summary of changes
Add safekeeper membership configuration struct itself and storing it in
the control file. In passing also add creation timestamp to the control
file (there were cases where I wanted it in the past).
Remove obsolete unused PersistedPeerInfo struct from control file (still
keep it control_file_upgrade.rs to have it in old upgrade code).
Remove the binary representation of cfile in the roundtrip test.
Updating it is annoying, and we still test the actual roundtrip.
Also add configuration to timeline creation http request, currently used
only in one python test. In passing, slightly change LSNs meaning in the
request: normally start_lsn is passed (the same as ancestor_start_lsn in
similar pageserver call), but we allow specifying higher commit_lsn for
manual intervention if needed. Also when given LSN initialize
term_history with it.
## Problem
We cannot get the size of the compaction queue and access the info.
Part of #9114
## Summary of changes
* Add an API endpoint to get the compaction queue.
* gc_compaction test case now waits until the compaction finishes.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Cplane and storage controller tenant config changes are not additive.
Any change overrides all existing tenant configs. This would be fine if
both did client side patching, but that's not the case.
Once this merges, we must update cplane to use the PATCH endpoint.
## Summary of changes
### High Level
Allow for patching of tenant configuration with a `PATCH
/v1/tenant/config` endpoint.
It takes the same data as it's PUT counterpart. For example the payload
below will update `gc_period` and unset `compaction_period`. All other
fields are left in their original state.
```
{
"tenant_id": "1234",
"gc_period": "10s",
"compaction_period": null
}
```
### Low Level
* PS and storcon gain `PATCH /v1/tenant/config` endpoints. PS endpoint
is only used for cplane managed instances.
* `storcon_cli` is updated to have separate commands for
`set-tenant-config` and `patch-tenant-config`
Related https://github.com/neondatabase/cloud/issues/21043
## Problem
I'm writing an ingest benchmark in #9812. To time S3 uploads, I need to
schedule a flush of the Pageserver's in-memory layer, but don't actually
want to wait around for it to complete (which will take a minute).
## Summary of changes
Add a parameter `wait_until_flush` (default `true`) for
`timeline/checkpoint` to control whether to wait for the flush to
complete.
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Stas Kelvic <stas@neon.tech>
# Context
This PR contains PoC-level changes for a product feature that allows
onboarding large databases into Neon without going through the regular
data path.
# Changes
This internal RFC provides all the context
* https://github.com/neondatabase/cloud/pull/19799
In the language of the RFC, this PR covers
* the Importer code (`fast_import`)
* all the Pageserver changes (mgmt API changes, flow implementation,
etc)
* a basic test for the Pageserver changes
# Reviewing
As acknowledged in the RFC, the code added in this PR is not ready for
general availability.
Also, the **architecture is not to be discussed in this PR**, but in the
RFC and associated Slack channel instead.
Reviewers of this PR should take that into consideration.
The quality bar to apply during review depends on what area of the code
is being reviewed:
* Importer code (`fast_import`): practically anything goes
* Core flow (`flow.rs`):
* Malicious input data must be expected and the existing threat models
apply.
* The code must not be safe to execute on *dedicated* Pageserver
instances:
* This means in particular that tenants *on other* Pageserver instances
must not be affected negatively wrt data confidentiality, integrity or
availability.
* Other code: the usual quality bar
* Pay special attention to correct use of gate guards, timeline
cancellation in all places during shutdown & migration, etc.
* Consider the broader system impact; if you find potentially
problematic interactions with Storage features that were not covered in
the RFC, bring that up during the review.
I recommend submitting three separate reviews, for the three high-level
areas with different quality bars.
# References
(Internal-only)
* refs https://github.com/neondatabase/cloud/issues/17507
* refs https://github.com/neondatabase/company_projects/issues/293
* refs https://github.com/neondatabase/company_projects/issues/309
* refs https://github.com/neondatabase/cloud/issues/20646
---------
Co-authored-by: Stas Kelvich <stas.kelvich@gmail.com>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: John Spray <john@neon.tech>
## Problem
Follow up of https://github.com/neondatabase/neon/pull/9682, that patch
didn't fully address the problem: what if shutdown fails due to whatever
reason and then we reattach the tenant? Then we will still remove the
future layer. The underlying problem is that the fix for #5878 gets
voided because of the generation optimizations.
Of course, we also need to ensure that delete happens after uploads, but
note that we only schedule deletes when there are no ongoing upload
tasks, so that's fine.
## Summary of changes
* Add a test case to reproduce the behavior (by changing the original
test case to attach the same generation).
* If layer upload happens after the deletion, drain the deletion queue
before uploading.
* If blocked_deletion is enabled, directly remove it from the
blocked_deletion queue.
* Local fs backend fix to avoid race between deletion and preload.
* test_emergency_mode does not need to wait for uploads (and it's
generally not possible to wait for uploads).
* ~~Optimize deletion executor to skip validation if there are no files
to delete.~~ this doesn't work
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Follow up to https://github.com/neondatabase/neon/pull/9682, hopefully
we can detect some issues or assure ourselves that this is ready for
production.
## Summary of changes
* Add a compaction-detach-ancestor smoke test.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
On Debian 12 (Bookworm), Python 3.11 is the latest available version.
## Summary of changes
- Update Python to 3.11 in build-tools
- Fix ruff check / format
- Fix mypy
- Use `StrEnum` instead of pair `str`, `Enum`
- Update docs
part of https://github.com/neondatabase/neon/issues/9114, we want to be
able to run partial gc-compaction in tests. In the future, we can also
expand this functionality to legacy compaction, so that we can trigger
compaction for a specific key range.
## Summary of changes
* Support passing compaction key range through pageserver routes.
* Refactor input parameters of compact related function to take the new
`CompactOptions`.
* Add tests for partial compaction. Note that the test may or may not
trigger compaction based on GC horizon. We need to improve the test case
to ensure things always get below the gc_horizon and the gc-compaction
can be triggered.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Problem
-------
Tests that directly call the Pageserver Management API to set tenant
config are flaky if the Pageserver is managed by Storcon because Storcon
is the source of truth and may (theoretically) reconcile a tenant at any
time.
Solution
--------
Switch all users of
`set_tenant_config`/`patch_tenant_config_client_side`
to use the `env.storage_controller.pageserver_api()`
Future Work
-----------
Prevent regressions from creeping in.
And generally clean up up tenant configuration.
Maybe we can avoid the Pageserver having a default tenant config at all
and put the default into Storcon instead?
* => https://github.com/neondatabase/neon/issues/9621
Refs
----
fixes https://github.com/neondatabase/neon/issues/9522
This PR adds a pageserver mgmt API to scan a layer file for disposable
keys.
It hooks it up to the sharding compaction test, demonstrating that we're
not filtering out all disposable keys.
This is extracted from PGDATA import
(https://github.com/neondatabase/neon/pull/9218)
where I do the filtering of layer files based on `is_key_disposable`.
Before, we didn't copy over the `index-part.json` of offloaded timelines
to the new shard's location, resulting in the new shard not knowing the
timeline even exists.
In #9444, we copy over the manifest, but we also need to do this for
`index-part.json`.
As the operations to do are mostly the same between offloaded and
non-offloaded timelines, we can iterate over all of them in the same
loop, after the introduction of a `TimelineOrOffloadedArcRef` type to
generalize over the two cases. This is analogous to the deletion code
added in #8907.
The added test also ensures that the sharded archival config endpoint
works, something that has not yet been ensured by tests.
Part of #8088
# Problem
Timeline creation can either be bootstrap or branch.
The distinction is made based on whether the `ancestor_*` fields are
present or not.
In the PGDATA import code
(https://github.com/neondatabase/neon/pull/9218), I add a third variant
to timeline creation.
# Solution
The above pushed me to refactor the code in Pageserver to distinguish
the different creation requests through enum variants.
There is no externally observable effect from this change.
On the implementation level, a notable change is that the acquisition of
the `TimelineCreationGuard` happens later than before. This is necessary
so that we have everything in place to construct the
`CreateTimelineIdempotency`. Notably, this moves the acquisition of the
creation guard _after_ the acquisition of the `gc_cs` lock in the case
of branching. This might appear as if we're at risk of holding `gc_cs`
longer than before this PR, but, even before this PR, we were holding
`gc_cs` until after the `wait_completion()` that makes the timeline
creation durable in S3 returns. I don't see any deadlock risk with
reversing the lock acquisition order.
As a drive-by change, I found that the `create_timeline()` function in
`neon_local` is unused, so I removed it.
# Refs
* platform context: https://github.com/neondatabase/neon/pull/9218
* product context: https://github.com/neondatabase/cloud/issues/17507
* next PR stacked atop this one:
https://github.com/neondatabase/neon/pull/9501
Add a test for timeline offloading, and subsequent unoffloading.
Also adds a manual endpoint, and issues a proper timeline shutdown
during offloading which prevents a pageserver hang at shutdown.
Part of #8088.
close https://github.com/neondatabase/neon/issues/9160
For whatever reason, pg17's WAL pattern seems different from others,
which triggers some flaky behavior within the compaction smoke test.
## Summary of changes
* Run L0 compaction before proceeding with the read benchmark.
* So that we can ensure the num of L0 layers is 0 and test the
compaction behavior only with L1 layers.
We have a threshold for triggering L0 compaction. In some cases, the
test case did not produce enough L0 layers to do a L0 compaction,
therefore leaving the layer map with 3+ L0 layers above the L1 layers.
This increases the average read depth for the timeline.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
This PR:
* Implements the rule that archived timelines require all of their
children to be archived as well, as specified in the RFC. There is no
fancy locking mechanism though, so the precondition can still be broken.
As a TODO for later, we still allow unarchiving timelines with archived
parents.
* Adds an `is_archived` flag to `TimelineInfo`
* Adds timeline_archival_config to `PageserverHttpClient`
* Adds a new `test_timeline_archive` test, loosely based on
`test_timeline_delete`
Part of #8088
## Problem
Migrations of tenant shards with cold secondaries are holding up drains
in during production deployments.
## Summary of changes
If a secondary locations is lagging by more than 256MiB (configurable,
but that's the default), then skip cutting it over to the secondary as part of the node drain.
Earlier I was thinking we'd need a (ancestor_lsn, timeline_id) ordered
list of reparented. Turns out we did not need it at all. Replace it with
an unordered hashset. Additionally refactor the reparented direct
children query out, it will later be used from more places.
Split off from #8430.
Cc: #6994
## Problem
Sometimes, a layer is Covered by hasn't yet been evicted from local disk
(e.g. shortly after image layer generation). It is not good use of
resources to download these to a secondary location, as there's a good
chance they will never be read.
This follows the previous change that added layer visibility:
- #8511
Part of epic:
- https://github.com/neondatabase/neon/issues/8398
## Summary of changes
- When generating heatmaps, only include Visible layers
- Update test_secondary_downloads to filter to visible layers when
listing layers from an attached location
Currently, we do not have facilities to persistently block GC on a
tenant for whatever reason. We could do a tenant configuration update,
but that is risky for generation numbers and would also be transient.
Introduce a `gc_block` facility in the tenant, which manages per
timeline blocking reasons.
Additionally, add HTTP endpoints for enabling/disabling manual gc
blocking for a specific timeline. For debugging, individual tenant
status now includes a similar string representation logged when GC is
skipped.
Cc: #6994
Makes `flush_frozen_layer` add a barrier to the upload queue and makes
it wait for that barrier to be reached until it lets the flushing be
completed.
This gives us backpressure and ensures that writes can't build up in an
unbounded fashion.
Fixes#7317
## Problem
This test sometimes found that ancestors were getting cleaned up before
it had done any compaction.
Compaction was happening implicitly via Workload.
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8298/10032173390/index.html#testresult/fb04786402f80822/retries
## Summary of changes
- Set upload=False when writing data after shard split, to avoid doing a
checkpoint
- Add a checkpoint_period & explicit wait for uploads so that we ensure
data lands in S3 without doing a checkpoint
This test reproduces the case of a writer creating a deep stack of L0
layers. It uses realistic layer sizes and writes several gigabytes of
data, therefore runs as a performance test although it is validating
memory footprint rather than performance per se.
It acts a regression test for two recent fixes:
- https://github.com/neondatabase/neon/pull/8401
- https://github.com/neondatabase/neon/pull/8391
In future it will demonstrate the larger improvement of using a k-merge
iterator for L0 compaction (#8184)
This test can be extended to enforce limits on the memory consumption of
other housekeeping steps, by restarting the pageserver and then running
other things to do the same "how much did RSS increase" measurement.
As described in #8385, the likely source for flakiness in
test_tenant_creation_fails is the following sequence of events:
1. test instructs the storage controller to create the tenant
2. storage controller adds the tenant and persists it to the database.
issues a creation request
3. the pageserver restarts with the failpoint disabled
4. storage controller's background reconciliation still wants to create
the tenant
5. pageserver gets new request to create the tenant from background
reconciliation
This commit just avoids the storage controller entirely. It has its own
set of issues, as the re-attach request will obviously not include the
tenant, but it's still useful to test for non-existence of the tenant.
The generation is also not optional any more during tenant attachment.
If you omit it, the pageserver yields an error. We change the signature
of `tenant_attach` to reflect that.
Alternative to #8385Fixes#8266
Right now timeline detach ancestor reports an error (409, "no ancestor")
on a new attempt after successful completion. This makes it troublesome
for storage controller retries. Fix it to respond with `200 OK` as if
the operation had just completed quickly.
Additionally, the returned timeline identifiers in the 200 OK response
are now ordered so that responses between different nodes for error
comparison are done by the storage controller added in #8353.
Design-wise, this PR introduces a new strategy for accessing the latest
uploaded IndexPart:
`RemoteTimelineClient::initialized_upload_queue(&self) ->
Result<UploadQueueAccessor<'_>, NotInitialized>`. It should be a more
scalable way to query the latest uploaded `IndexPart` than to add a
query method for each question directly on `RemoteTimelineClient`.
GC blocking will need to be introduced to make the operation fully
idempotent. However, it is idempotent for the cases demonstrated by
tests.
Cc: #6994
Part of #7497, closes#8071. (accidentally closed#8208, reopened here)
## Problem
After the changes in #8084, we need synthetic size to also account for
leased LSNs so that users do not get free retention by running a small
ephemeral endpoint for a long time.
## Summary of changes
This PR integrates LSN leases into the synthetic size calculation. We
model leases as read-only branches started at the leased LSN (except it
does not have a timeline id).
Other changes:
- Add new unit tests testing whether a lease behaves like a read-only
branch.
- Change `/size_debug` response to include lease point in the SVG
visualization.
- Fix `/lsn_lease` HTTP API to do proper parsing for POST.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
For some time, we have created tenants with calls to location_conf. The
legacy "POST /v1/tenant" path was only used in some tests.
## Summary of changes
- Remove the API
- Relocate TenantCreateRequest to the controller API file (this used to
be used in both pageserver and controller APIs)
- Rewrite tenant_create test helper to use location_config API, as
control plane and storage controller do
- Update docker-compose test script to create tenants with
location_config API (this small commit is also present in
https://github.com/neondatabase/neon/pull/7947)
Adds manual compaction trigger; add gc compaction to test_gc_feedback
Part of https://github.com/neondatabase/neon/issues/8002
```
test_gc_feedback[debug-pg15].logical_size: 50 Mb
test_gc_feedback[debug-pg15].physical_size: 2269 Mb
test_gc_feedback[debug-pg15].physical/logical ratio: 44.5302
test_gc_feedback[debug-pg15].max_total_num_of_deltas: 7
test_gc_feedback[debug-pg15].max_num_of_deltas_above_image: 2
test_gc_feedback[debug-pg15].logical_size_after_bottom_most_compaction: 50 Mb
test_gc_feedback[debug-pg15].physical_size_after_bottom_most_compaction: 287 Mb
test_gc_feedback[debug-pg15].physical/logical ratio after bottom_most_compaction: 5.6312
test_gc_feedback[debug-pg15].max_total_num_of_deltas_after_bottom_most_compaction: 4
test_gc_feedback[debug-pg15].max_num_of_deltas_above_image_after_bottom_most_compaction: 1
```
## Summary of changes
* Add the manual compaction trigger
* Use in test_gc_feedback
* Add a guard to avoid running it with retain_lsns
* Fix: Do `schedule_compaction_update` after compaction
* Fix: Supply deltas in the correct order to reconstruct value
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
These APIs have been deprecated for some time, but were still used from
test code.
Closes: https://github.com/neondatabase/neon/issues/4282
## Summary of changes
- It is still convenient to do a "tenant_attach" from a test without
having to write out a location_conf body, so those test methods have
been retained with implementations that call through to their
location_conf equivalent.
Part of #7497, closes#8072.
## Problem
Currently the `get_lsn_by_timestamp` and branch creation pageserver APIs do not provide a pleasant client experience where the looked-up LSN might be GC-ed between the two API calls.
This PR attempts to prevent common races between GC and branch creation by making use of LSN leases provided in #8084. A lease can be optionally granted to a looked-up LSN. With the lease, GC will not touch layers needed to reconstruct all pages at this LSN for the duration of the lease.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
These APIs have be unused for some time. They were superseded by
/location_conf: the equivalent of ignoring a tenant is now to put it in
secondary mode.
## Summary of changes
- Remove APIs
- Remove tests & helpers that used them
- Remove error variants that are no longer needed.
A simple API to collect some statistics after compaction to easily
understand the result.
The tool reads the layer map, and analyze range by range instead of
doing single-key operations, which is more efficient than doing a
benchmark to collect the result. It currently computes two key metrics:
* Latest data access efficiency, which finds how many delta layers /
image layers the system needs to iterate before returning any key in a
key range.
* (Approximate) PiTR efficiency, as in
https://github.com/neondatabase/neon/issues/7770, which is simply the
number of delta files in the range. The reason behind that is, assume no
image layer is created, PiTR efficiency is simply the cost of collect
records from the delta layers, and the replay time. Number of delta
files (or in the future, estimated size of reads) is a simple yet
efficient way of estimating how much effort the page server needs to
reconstruct a page.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Closes#7406.
## Problem
When a `get_lsn_by_timestamp` request is cancelled, an anyhow error is
exposed to handle that case, which verbosely logs the error. However, we
don't benefit from having the full backtrace provided by anyhow in this
case.
## Summary of changes
This PR introduces a new `ApiError` type to handle errors caused by
cancelled request more robustly.
- A new enum variant `ApiError::Cancelled`
- Currently the cancelled request is mapped to status code 500.
- Need to handle this error in proxy's `http_util` as well.
- Added a failpoint test to simulate cancelled `get_lsn_by_timestamp`
request.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
detaching a timeline from its ancestor can leave the resulting timeline
with more L0 layers than the compaction threshold. most of the time, the
detached timeline has made progress, and next time the L0 -> L1
compaction happens near the original branch point and not near the
last_record_lsn.
add a test to ensure that inheriting the historical L0s does not change
fullbackup. additionally:
- add `wait_until_completed` to test-only timeline checkpoint and
compact HTTP endpoints. with `?wait_until_completed=true` the endpoints
will wait until the remote client has completed uploads.
- for delta layers, describe L0-ness with the `/layer` endpoint
Cc: #6994
