Changes are:
* Pageserver: start reading from NEON_AUTH_TOKEN by default.
Warn if ZENITH_AUTH_TOKEN is used instead.
* Compute, Docs: fix the default token name.
* Control plane: change name of the token in configs and start
sequences.
Compatibility:
* Control plane in tests: works, no compatibility expected.
* Control plane for local installations: never officially supported
auth anyways. If someone did enable it, `pageserver.toml` should be updated
with the new `neon.pageserver_connstring` and `neon.safekeeper_token_env`.
* Pageserver is backward compatible: you can run new Pageserver with old
commands and environment configurations, but not vice-versa.
The culprit is the hard-coded `NEON_AUTH_TOKEN`.
* Compute has no code changes. As long as you update its configuration
file with `pageserver_connstring` in sync with the start up scripts,
you are good to go.
* Safekeeper has no code changes and has never used `ZENITH_AUTH_TOKEN` in
the first place.
1.66 release speeds up compile times for over 10% according to tests.
Also its Clippy finds plenty of old nits in our code:
* useless conversion, `foo as u8` where `foo: u8` and similar, removed
`as u8` and similar
* useless references and dereferenced (that were automatically adjusted
by the compiler), removed various `&` and `*`
* bool -> u8 conversion via `if/else`, changed to `u8::from`
* Map `.iter()` calls where only values were used, changed to
`.values()` instead
Standing out lints:
* `Eq` is missing in our protoc generated structs. Silenced, does not
seem crucial for us.
* `fn default` looks like the one from `Default` trait, so I've
implemented that instead and replaced the `dummy_*` method in tests with
`::default()` invocation
* Clippy detected that
```
if retry_attempt < u32::MAX {
retry_attempt += 1;
}
```
is a saturating add and proposed to replace it.
* Fix https://github.com/neondatabase/neon/issues/1854
* Never log Safekeeper::conninfo in walproposer as it now contains a secret token
* control_panel, test_runner: generate and pass JWT tokens for Safekeeper to compute and pageserver
* Compute: load JWT token for Safekepeer from the environment variable. Do not reuse the token from
pageserver_connstring because it's embedded in there weirdly.
* Pageserver: load JWT token for Safekeeper from the environment variable.
* Rewrite docs/authentication.md
- Split postgres_ffi into two version specific files.
- Preserve pg_version in timeline metadata.
- Use pg_version in safekeeper code. Check for postgres major version mismatch.
- Clean up the code to use DEFAULT_PG_VERSION constant everywhere, instead of hardcoding.
- Parameterize python tests: use DEFAULT_PG_VERSION env and pg_version fixture.
To run tests using a specific PostgreSQL version, pass the DEFAULT_PG_VERSION environment variable:
'DEFAULT_PG_VERSION='15' ./scripts/pytest test_runner/regress'
Currently don't all tests pass, because rust code relies on the default version of PostgreSQL in a few places.
Including, but not limited to:
* Fixes to neon management code to support walproposer-as-an-extension
* Fix issue in expected output of pg settings serialization.
* Show the logs of a failed --sync-safekeepers process in CI
* Add compat layer for renamed GUCs in postgres.conf
* Update vendor/postgres to the latest origin/main
If the 'basebackup' command failed in the middle of building the tar
archive, the client would not report the error, but would attempt to
to start up postgres with the partial contents of the data directory.
That fails because the control file is missing (it's added to the
archive last, precisly to make sure that you cannot start postgres
from a partial archive). But the client doesn't see the proper error
message that caused the basebackup to fail in the server, which is
confusing.
Two issues conspired to cause that:
1. The tar::Builder object that we use in the pageserver to construct
the tar stream has a Drop handler that automatically writes a valid
end-of-archive marker on drop. Because of that, the resulting tarball
looks complete, even if an error happens while we're building it. The
pageserver does send an ErrorResponse after the seemingly-valid
tarball, but:
2. The client stops reading the Copy stream, as soon as it sees the
tar end-of-archive marker. Therefore, it doesn't read the
ErrorResponse that comes after it.
We have two clients that call 'basebackup', one in `control_plane`
used by the `neon_local` binary, and another one in
`compute_tools`. Both had the same issue.
This PR fixes both issues, even though fixing either one would be
enough to fix the problem at hand. The pageserver now doesn't send the
end-of-archive marker on error, and the client now reads the copy
stream to the end, even if it sees an end-of-archive marker.
Fixes github issue #1715
In the passing, change Basebackup to use generic Write rather than
'dyn'.
wal_keep_size is already set to 0 in our cloud setup, but we don't use this value in tests. This commit fixes wal_keep_size in control_plane and adds tests for WAL recycling and lagging safekeepers.
Change meaning of lsns in HOT_STANDBY_FEEDBACK:
flush_lsn = disk_consistent_lsn,
apply_lsn = remote_consistent_lsn
Update compute node backpressure configuration respectively.
Update compute node configuration:
set 'synchronous_commit=remote_write' in setup without safekeepers.
This way compute node doesn't have to wait for data checkpoint on pageserver.
This doesn't guarantee data durability, but we only use this setup for tests, so it's fine.
This is needed for implementation of tenant rebalancing. With this
change safekeeper becomes aware of which pageserver is supposed to be
used for replication from this particular compute.
The 'zenith' CLI utility can now be used to launch safekeepers. By
default, one safekeeper is configured. There are new 'safekeeper
start/stop' subcommands to manage the safekeepers. Each safekeeper is
given a name that can be used to identify the safekeeper to start/stop
with the 'zenith start/stop' commands. The safekeeper data is stored
in '.zenith/safekeepers/<name>'.
The 'zenith start' command now starts the pageserver and also all
safekeepers. 'zenith stop' stops pageserver, all safekeepers, and all
postgres nodes.
Introduce new 'zenith pageserver start/stop' subcommands for
starting/stopping just the page server.
The biggest change here is to the 'zenith init' command. This adds a
new 'zenith init --config=<path to toml file>' option. It takes a toml
config file that describes the environment. In the config file, you
can specify options for the pageserver, like the pg and http ports,
and authentication. For each safekeeper, you can define a name and the
pg and http ports. If you don't use the --config option, you get a
default configuration with a pageserver and one safekeeper. Note that
that's different from the previous default of no safekeepers. Any
fields that are omitted in the configuration file are filled with
defaults. You can also specify the initial tenant ID in the config
file. A couple of sample config files are added in the control_plane/
directory.
The --pageserver-pg-port, --pageserver-http-port, and
--pageserver-auth options to 'zenith init' are removed. Use a config
file instead.
Finally, change the python test fixtures to use the new 'zenith'
commands and the config file to describe the environment.
Change 'zenith.signal' file to a human-readable format, similar to
backup_label. It can contain a "PREV LSN: %X/%X" line, or a special
value to indicate that it's OK to start with invalid LSN ('none'), or
that it's a read-only node and generating WAL is forbidden
('invalid').
The 'zenith pg create' and 'zenith pg start' commands now take a node
name parameter, separate from the branch name. If the node name is not
given, it defaults to the branch name, so this doesn't break existing
scripts.
If you pass "foo@<lsn>" as the branch name, a read-only node anchored
at that LSN is created. The anchoring is performed by setting the
'recovery_target_lsn' option in the postgresql.conf file, and putting
the server into standby mode with 'standby.signal'.
We no longer store the synthetic checkpoint record in the WAL segment.
The postgres startup code has been changed to use the copy of the
checkpoint record in the pg_control file, when starting in zenith
mode.
This is in preparation for supporting read-only nodes. You can launch
multiple read-only nodes on the same brach, so we need an identifier
for each node, separate from the branch name.
Support is done via pytest-xdist plugin.
To use the feature add -n<concurrency> to pytest invocation
e.g. pytest -n8 to run 8 tests in parallel.
Changes in code are mostly about ports assigning. Previously port for
pageserver was hardcoded without the ability to override through zenith
cli and ports for started compute nodes were calculated twice, in zenith
cli and in test code. Now zenith cli supports port arguments for
pageserver and compute nodes to be passed explicitly.
Tests are modified in such a way that each worker gets a non overlapping
port range which can be configured and now contains 100 ports. These
ports are distributed to test services (pageserver, wal acceptors,
compute nodes) so they can work independently.
Otherwise we produce corrupted record holes in WAL during compute node restart
in case there was an unfinished record from the old compute, as these reports
advance commit_lsn -- reliably persisted part of WAL.
ref #549.
Mostly by @knizhnik. I adjusted to make sure proposer always starts streaming
since record beginning so we don't need special quirks for decoding in
safekeeper.
Change control plane code to call `postgres --sync-safekeepers` before
compute node start when safekeepers are enabled. Now `pg create` will
create an empty data directory with the proper config file. Subsequent
`pg start` will run `sync-safekeepers` and will call basebackup with
the resulting LSN. Also change few tests to accommodate this new behavior.
