For control-plane managed tenants, we have the page in the admin console
that lists all tenants on a specific pageserver. But for
storage-controller managed ones, we don't have that functionality for
now.
## Summary of changes
Adds an API that lists all shards on a given node (intention + observed)
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We want to do AZ aware scheduling, but don't have enough metadata.
## Summary of changes
Introduce a `preferred_az_id` concept for each managed tenant shard.
In a future PR, the scheduler will use this as a soft preference.
The idea is to try and keep the shard attachments within the same AZ.
Under the assumption that the compute was placed in the correct AZ,
this reduces the chances of cross AZ trafic from between compute and PS.
In terms of code changes we:
1. Add a new nullable `preferred_az_id` column to the `tenant_shards`
table. Also include an in-memory counterpart.
2. Populate the preferred az on tenant creation and shard splits.
3. Add an endpoint which allows to bulk-set preferred AZs.
(3) gives us the migration path. I'll write a script which queries the
cplane db in the region and sets the preferred az of all shards with an
active compute to the AZ of said compute. For shards without an active compute,
I'll use the AZ of the currently attached pageserver
since this is what cplane uses now to schedule computes.
## Problem
The initial implementation of the validate API treats the in-memory
generations as authoritative.
- This is true when only one storage controller is running, but if a
rogue controller was running that hadn't been shut down properly, and
some pageserver requests were routed to that bad controller, it could
incorrectly return valid=true for stale generations.
- The generation in the main in-memory map gets out of date while a live
migration is in flight, and if the origin location for the migration
tries to do some deletions even though it is in AttachedStale (for
example because it had already started compaction), these might be
wrongly validated + executed.
## Summary of changes
- Continue to do the in-memory check: if this returns valid=false it is
sufficient to reject requests.
- When valid=true, do an additional read from the database to confirm
the generation is fresh.
- Revise behavior for validation on missing shards: this used to always
return valid=true as a convenience for deletions and shard splits, so
that pageservers weren't prevented from completing any enqueued
deletions for these shards after they're gone. However, this becomes
unsafe when we consider split brain scenarios. We could reinstate this
in future if we wanted to store some tombstones for deleted shards.
- Update test_scrubber_physical_gc to cope with the behavioral change:
they must now explicitly flush the deletion queue before splits, to
avoid tripping up on deletions that are enqueued at the time of the
split (these tests assert "scrubber deletes nothing", which check fails
if the split leaves behind some remote objects that are legitimately
GC'able)
- Add `test_storage_controller_validate_during_migration`, which uses
failpoints to create a situation where incorrect generation validation
during a live migration could result in a corruption
The rate of validate calls for tenants is pretty low: it happens as a
consequence deletions from GC and compaction, which are both
concurrency-limited on the pageserver side.
We currently do not record safekeepers in the storage controller
database. We want to migrate timelines across safekeepers eventually, so
start recording the safekeepers on deploy.
Cc: #8698
## Problem
- If a reconciler was waiting to be able to notify computes about a
change, but the control plane was waiting for the controller to finish a
timeline creation/deletion, the overall system can deadlock.
- If a tenant shard was migrated concurrently with a timeline
creation/deletion, there was a risk that the timeline operation could be
applied to a non-latest-generation location, and thereby not really be
persistent. This has never happened in practice, but would eventually
happen at scale.
Closes: #8743
## Summary of changes
- Introduce `Service::tenant_remote_mutation` helper, which looks up
shards & generations and passes them into an inner function that may do
remote I/O to pageservers. Before returning success, this helper checks
that generations haven't incremented, to guarantee that changes are
persistent.
- Convert tenant_timeline_create, tenant_timeline_delete, and
tenant_timeline_detach_ancestor to use this helper.
- These functions no longer block on ensure_attached unless the tenant
was never attached at all, so they should make progress even if we can't
complete compute notifications.
This increases the database load from timeline/create operations, but
only with cheap read transactions.
## Problem
Storage controllers did not have the right token to speak to their peers
for leadership transitions.
## Summary of changes
Accept a peer jwt token for the storage controller.
Epic: https://github.com/neondatabase/cloud/issues/14701
## Problem
https://github.com/neondatabase/neon/pull/8588 implemented the mechanism
for storage controller
leadership transfers. However, there's no tests that exercise the
behaviour.
## Summary of changes
1. Teach `neon_local` how to handle multiple storage controller
instances. Each storage controller
instance gets its own subdirectory (`storage_controller_1, ...`).
`storage_controller start|stop` subcommands
have also been extended to optionally accept an instance id.
2. Add a storage controller proxy test fixture. It's a basic HTTP server
that forwards requests from pageserver
and test env to the currently configured storage controller.
3. Add a test which exercises storage controller leadership transfer.
4. Finally fix a couple bugs that the test surfaced
Per #8674, disallow node configuration while drain/fill are ongoing.
Implement it by adding a only-http wrapper
`Service::external_node_configure` which checks for operation existing
before configuring.
Additionally:
- allow cancelling drain/fill after a pageserver has restarted and
transitioned to WarmingUp
Fixes: #8674
## Problem
Migrations of tenant shards with cold secondaries are holding up drains
in during production deployments.
## Summary of changes
If a secondary locations is lagging by more than 256MiB (configurable,
but that's the default), then skip cutting it over to the secondary as part of the node drain.
Part of #8128, followed by #8502.
## Problem
Currently we lack mechanism to alert unhealthy `scan_metadata` status if
we start running this scrubber command as part of a cronjob. With the
storage controller client introduced to storage scrubber in #8196, it is
viable to set up alert by storing health status in the storage
controller database.
We intentionally do not store the full output to the database as the
json blobs potentially makes the table really huge. Instead, only a
health status and a timestamp recording the last time metadata health
status is posted on a tenant shard.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
We are missing the step-down primitive required to implement rolling
restarts of the storage controller.
## Summary of changes
Add `/control/v1/step_down` endpoint which puts the storage controller
into a state where it rejects
all API requests apart from `/control/v1/step_down`, `/status` and
`/metrics`. When receiving the request,
storage controller cancels all pending reconciles and waits for them to
exit gracefully. The response contains
a snapshot of the in-memory observed state.
Related:
* https://github.com/neondatabase/cloud/issues/14701
* https://github.com/neondatabase/neon/issues/7797
* https://github.com/neondatabase/neon/pull/8310
## Problem
Re-attach blocks the pageserver http server from starting up. Hence, it
can't reply to heartbeats
until that's done. This makes the storage controller mark the node
off-line (not good). We worked
around this by setting the interval after which nodes are marked offline
to 5 minutes. This isn't a
long term solution.
## Summary of changes
* Introduce a new `NodeAvailability` state: `WarmingUp`. This state
models the following time interval:
* From receiving the re-attach request until the pageserver replies to
the first heartbeat post re-attach
* The heartbeat delta generator becomes aware of this state and uses a
separate longer interval
* Flag `max-warming-up-interval` now models the longer timeout and
`max-offline-interval` the shorter one to
match the names of the states
Closes https://github.com/neondatabase/neon/issues/7552
## Problem
In anticipation of later adding a really nice drain+delete API, I
initially only added an intentionally basic `/drop` API that is just
about usable for deleting nodes in a pinch, but requires some ugly
storage controller restarts to persuade it to restart secondaries.
## Summary of changes
I started making a few tiny fixes, and ended up writing the delete
API...
- Quality of life nit: ordering of node + tenant listings in storcon_cli
- Papercut: Fix the attach_hook using the wrong operation type for
reporting slow locks
- Make Service::spawn tolerate `generation_pageserver` columns that
point to nonexistent node IDs. I started out thinking of this as a
general resilience thing, but when implementing the delete API I
realized it was actually a legitimate end state after the delete API is
called (as that API doesn't wait for all reconciles to succeed).
- Add a `DELETE` API for nodes, which does not gracefully drain, but
does reschedule everything. This becomes safe to use when the system is
in any state, but will incur availability gaps for any tenants that
weren't already live-migrated away. If tenants have already been
drained, this becomes a totally clean + safe way to decom a node.
- Add a test and a storcon_cli wrapper for it
This is meant to be a robust initial API that lets us remove nodes
without doing ugly things like restarting the storage controller -- it's
not quite a totally graceful node-draining routine yet. There's more
work in https://github.com/neondatabase/neon/issues/8333 to get to our
end-end state.
## Problem
When generations were new, these messages were an important way of
noticing if something unexpected was going on. We found some real issues
when investigating tests that unexpectedly tripped them.
At time has gone on, this code is now pretty battle-tested, and as we do
more live migrations etc, it's fairly normal to see the occasional
message from a node with a stale generation.
At this point the cognitive load on developers to selectively allow-list
these logs outweighs the benefit of having them at warn severity.
Closes: https://github.com/neondatabase/neon/issues/8080
## Summary of changes
- Downgrade "Dropped remote consistent LSN updates" and "Dropping stale
deletions" messages to INFO
- Remove all the allow-list entries for these logs.
## Problem
For some time, we have created tenants with calls to location_conf. The
legacy "POST /v1/tenant" path was only used in some tests.
## Summary of changes
- Remove the API
- Relocate TenantCreateRequest to the controller API file (this used to
be used in both pageserver and controller APIs)
- Rewrite tenant_create test helper to use location_config API, as
control plane and storage controller do
- Update docker-compose test script to create tenants with
location_config API (this small commit is also present in
https://github.com/neondatabase/neon/pull/7947)
## Problem
Background node operations take a long time for loaded nodes.
## Summary of changes
Increase number of concurrent reconciles an operation is allowed to
spawn.
This should make drain and fill operations faster and the new value is
still well below the total limit of concurrent reconciles.
## Problem
There's no way to cancel drain and fill operations.
## Summary of changes
Implement HTTP endpoints to allow cancelling of background operations.
When the operationis cancelled successfully, the node scheduling policy will revert to
`Active`.
In #7957 we enabled deletion without attachment, but retained the
old-style deletion (return 202, delete in background) for attached
tenants. In this PR, we remove the old-style deletion path, such that if
the tenant delete API is invoked while a tenant is detached, it is
simply detached before completing the deletion.
This intentionally doesn't rip out all the old deletion code: in case a
deletion was in progress at time of upgrade, we keep around the code for
finishing it for one release cycle. The rest of the code removal happens
in https://github.com/neondatabase/neon/pull/8091
Now that deletion will always be via the new path, the new path is also
updated to use some retries around remote storage operations, to
tripping up the control plane with 500s if S3 has an intermittent issue.
## Problem
When creating a new shard the storage controller schedules via
Scheduler::schedule_shard. This does not take into account the number of
attached shards. What it does take into account is the node affinity:
when a shard is scheduled, all its nodes (primaries and secondaries) get
their affinity incremented.
For two node clusters and shards with one secondary we have a
pathological case where all primaries are scheduled on the same node.
Now that we track the count of attached shards per node, this is trivial
to fix. Still, the "proper" fix is to use the pageserver's utilization
score.
Closes https://github.com/neondatabase/neon/issues/8041
## Summary of changes
Use attached shard count when deciding which node to schedule a fresh
shard on.
## Problem
Pageserver restarts cause read availablity downtime for tenants. See
`Motivation` section in the
[RFC](https://github.com/neondatabase/neon/pull/7704).
## Summary of changes
* Introduce a new `NodeSchedulingPolicy`: `PauseForRestart`
* Implement the first take of drain and fill algorithms
* Add a node status endpoint which can be polled to figure out when an
operation is done
The implementation follows the RFC, so it might be useful to peek at it
as you're reviewing.
Since the PR is rather chunky, I've made sure all commits build (with
warnings), so you can
review by commit if you prefer that.
RFC: https://github.com/neondatabase/neon/pull/7704
Related https://github.com/neondatabase/neon/issues/7387
## Problem
A period of unavailability for all pageservers in a cluster produced the
following fallout in staging:
all tenants became detached and required manual operation to re-attach.
Manually restarting
the storage controller re-attached all tenants due to a consistency bug.
Turns out there are two related bugs which caused the issue:
1. Pageserver re-attach can be processed before the first heartbeat.
Hence, when handling
the availability delta produced by the heartbeater,
`Node::get_availability_transition` claims
that there's no need to reconfigure the node.
2. We would still attempt to reschedule tenant shards when handling
offline transitions even
if the entire cluster is down. This puts tenant shards into a state
where the reconciler believes
they have to be detached (no pageserver shows up in their intent state).
This is doubly wrong
because we don't mark the tenant shards as detached in the database,
thus causing memory vs
database consistency issues. Luckily, this bug allowed all tenant shards
to re-attach after restart.
## Summary of changes
* For (1), abuse the fact that re-attach requests do not contain an
utilisation score and use that
to differentiate from a node that replied to heartbeats.
* For (2), introduce a special case that skips any rescheduling if the
entire cluster is unavailable.
* Update the storage controller heartbeat test with an extra scenario
where the entire cluster goes
for lunch.
Fixes https://github.com/neondatabase/neon/issues/8044
## Problem
This test could fail with a timeout waiting for tenant deletions.
Tenant deletions could get tripped up on nodes transitioning from
offline to online at the moment of the deletion. In a previous
reconciliation, the reconciler would skip detaching a particular
location because the node was offline, but then when we do the delete
the node is marked as online and can be picked as the node to use for
issuing a deletion request. This hits the "Unexpectedly still attached
path", which would still work if the caller kept calling DELETE, but if
a caller does a Delete,get,get,get poll, then it doesn't work because
the GET calls fail after we've marked the tenant as detached.
## Summary of changes
Fix the undesirable storage controller behavior highlighted by this test
failure:
- Change tenant deletion flow to _always_ wait for reconciliation to
succeed: it was unsound to proceed and return 202 if something was still
attached, because after the 202 callers can no longer GET the tenant.
Stabilize the test:
- Add a reconcile_until_idle to the test, so that it will not have
reconciliations running in the background while we mark a node online.
This test is not meant to be a chaos test: we should test that kind of
complexity elsewhere.
- This reconcile_until_idle also fixes another failure mode where the
test might see a None for a tenant location because a reconcile was
mutating it
(https://neon-github-public-dev.s3.amazonaws.com/reports/pr-7288/9500177581/index.html#suites/8fc5d1648d2225380766afde7c428d81/4acece42ae00c442/)
It remains the case that a motivated tester could produce a situation
where a DELETE gives a 500, when precisely the wrong node transitions
from offline to available at the precise moment of a deletion (but the
500 is better than returning 202 and then failing all subsequent GETs).
Note that nodes don't go through the offline state during normal
restarts, so this is super rare. We should eventually fix this by making
DELETE to the pageserver implicitly detach the tenant if it's attached,
but that should wait until nobody is using the legacy-style deletes (the
ones that use 202 + polling)
## Problem
As described in #7952, the controller's attempt to reconcile a tenant
before finally deleting it can get hung up waiting for the compute
notification hook to accept updates.
The fact that we try and reconcile a tenant at all during deletion is
part of a more general design issue (#5080), where deletion was
implemented as an operation on attached tenant, requiring the tenant to
be attached in order to delete it, which is not in principle necessary.
Closes: #7952
## Summary of changes
- In the pageserver deletion API, only do the traditional deletion path
if the tenant is attached. If it's secondary, then tear down the
secondary location, and then do a remote delete. If it's not attached at
all, just do the remote delete.
- In the storage controller, instead of ensuring a tenant is attached
before deletion, do a best-effort detach of the tenant, and then call
into some arbitrary pageserver to issue a deletion of remote content.
The pageserver retains its existing delete behavior when invoked on
attached locations. We can remove this later when all users of the API
are updated to either do a detach-before-delete. This will enable
removing the "weird" code paths during startup that sometimes load a
tenant and then immediately delete it, and removing the deletion markers
on tenants.
## Problem
Closes
[test_lock_time_tracing](https://github.com/neondatabase/neon/issues/7691)
## Summary of changes
Taking a look at the execution of the same test in logs, it can be
concluded that the time we are holding the lock is sometimes not
enough(must be above 30s) to cause the second log to be shown by the
thread that is creating a timeline.
In the [successful
execution](https://neon-github-public-dev.s3.amazonaws.com/reports/pr-7663/9021247520/index.html#testresult/a21bce8c702b37f0)
it can be seen that the log `Operation TimelineCreate on key
5e088fc2dd14945020d0fa6d9efd1e36 has waited 30.000887709s for shared
lock` was on the edge of being logged, if it was below 30s it would not
be shown.
```
2024-05-09T18:02:32.552093Z WARN request{method=PUT path=/control/v1/tenant/5e088fc2dd14945020d0fa6d9efd1e36/policy request_id=af7e4a04-d181-4acb-952f-9597c8eba5a8}: Lock on UpdatePolicy was held for 31.001892592s
2024-05-09T18:02:32.552109Z INFO request{method=PUT path=/control/v1/tenant/5e088fc2dd14945020d0fa6d9efd1e36/policy request_id=af7e4a04-d181-4acb-952f-9597c8eba5a8}: Request handled, status: 200 OK
2024-05-09T18:02:32.552271Z WARN request{method=POST path=/v1/tenant/5e088fc2dd14945020d0fa6d9efd1e36/timeline request_id=d3af756e-dbb3-476b-89bd-3594f19bbb67}: Operation TimelineCreate on key 5e088fc2dd14945020d0fa6d9efd1e36 has waited 30.000887709s for shared lock
```
In the [failed
execution](https://neon-github-public-dev.s3.amazonaws.com/reports/pr-7663/9022743601/index.html#/testresult/deb90136aeae4fce):
```
2024-05-09T20:14:33.526311Z INFO request{method=POST path=/v1/tenant/68194ffadb61ca11adcbb11cbeb4ec6e/timeline request_id=1daa8c31-522d-4805-9114-68cdcffb9823}: Creating timeline 68194ffadb61ca11adcbb11cbeb4ec6e/f72185990ed13f0b0533383f81d877af
2024-05-09T20:14:36.441165Z INFO Heartbeat round complete for 1 nodes, 0 offline
2024-05-09T20:14:41.441657Z INFO Heartbeat round complete for 1 nodes, 0 offline
2024-05-09T20:14:41.535227Z INFO request{method=POST path=/upcall/v1/validate request_id=94a7be88-474e-4163-92f8-57b401473add}: Handling request
2024-05-09T20:14:41.535269Z INFO request{method=POST path=/upcall/v1/validate request_id=94a7be88-474e-4163-92f8-57b401473add}: handle_validate: 68194ffadb61ca11adcbb11cbeb4ec6e(gen 1): valid=true (latest Some(00000001))
2024-05-09T20:14:41.535284Z INFO request{method=POST path=/upcall/v1/validate request_id=94a7be88-474e-4163-92f8-57b401473add}: Request handled, status: 200 OK
2024-05-09T20:14:46.441854Z INFO Heartbeat round complete for 1 nodes, 0 offline
2024-05-09T20:14:51.441151Z INFO Heartbeat round complete for 1 nodes, 0 offline
2024-05-09T20:14:56.441199Z INFO Heartbeat round complete for 1 nodes, 0 offline
2024-05-09T20:15:01.440971Z INFO Heartbeat round complete for 1 nodes, 0 offline
2024-05-09T20:15:03.516320Z INFO request{method=PUT path=/control/v1/tenant/68194ffadb61ca11adcbb11cbeb4ec6e/policy request_id=0edfdb5b-2b05-486b-9879-d83f234d2f0d}: failpoint "tenant-update-policy-exclusive-lock": sleep done
2024-05-09T20:15:03.518474Z INFO request{method=PUT path=/control/v1/tenant/68194ffadb61ca11adcbb11cbeb4ec6e/policy request_id=0edfdb5b-2b05-486b-9879-d83f234d2f0d}: Updated scheduling policy to Stop tenant_id=68194ffadb61ca11adcbb11cbeb4ec6e shard_id=0000
2024-05-09T20:15:03.518512Z WARN request{method=PUT path=/control/v1/tenant/68194ffadb61ca11adcbb11cbeb4ec6e/policy request_id=0edfdb5b-2b05-486b-9879-d83f234d2f0d}: Scheduling is disabled by policy Stop tenant_id=68194ffadb61ca11adcbb11cbeb4ec6e shard_id=0000
2024-05-09T20:15:03.518540Z WARN request{method=PUT path=/control/v1/tenant/68194ffadb61ca11adcbb11cbeb4ec6e/policy request_id=0edfdb5b-2b05-486b-9879-d83f234d2f0d}: Lock on UpdatePolicy was held for 31.003712703s
2024-05-09T20:15:03.518570Z INFO request{method=PUT path=/control/v1/tenant/68194ffadb61ca11adcbb11cbeb4ec6e/policy request_id=0edfdb5b-2b05-486b-9879-d83f234d2f0d}: Request handled, status: 200 OK
2024-05-09T20:15:03.518804Z WARN request{method=POST path=/v1/tenant/68194ffadb61ca11adcbb11cbeb4ec6e/timeline request_id=1daa8c31-522d-4805-9114-68cdcffb9823}: Scheduling is disabled by policy Stop tenant_id=68194ffadb61ca11adcbb11cbeb4ec6e shard_id=0000
2024-05-09T20:15:03.518815Z INFO request{method=POST path=/v1/tenant/68194ffadb61ca11adcbb11cbeb4ec6e/timeline request_id=1daa8c31-522d-4805-9114-68cdcffb9823}: Creating timeline on shard 68194ffadb61ca11adcbb11cbeb4ec6e/f72185990ed13f0b0533383f81d877af, attached to node 1 (localhost)
```
we can see that the difference between starting to create timeline
`2024-05-09T20:14:33.526311Z` and creating timeline
`2024-05-09T20:15:03.518815Z` is not above 30s and will not cause any
logs to appear.
The proposed solution is to prolong how long we will pause to ensure
that the thread that creates the timeline waits above 30s.
Preceding PR https://github.com/neondatabase/neon/pull/7613 reduced the
usage of `--pageserver-config-override`.
This PR builds on top of that work and fully removes the `neon_local
--pageserver-config-override`.
Tests that need a non-default `pageserver.toml` control it using two
options:
1. Specify `NeonEnvBuilder.pageserver_config_override` before
`NeonEnvBuilder.init_start()`. This uses a new `neon_local init
--pageserver-config` flag.
2. After `init_start()`: `env.pageserver.stop()` +
`NeonPageserver.edit_config_toml()` + `env.pageserver.start()`
A few test cases were using
`env.pageserver.start(overrides=("--pageserver-config-override...",))`.
I changed them to use one of the options above.
Future Work
-----------
The `neon_local init --pageserver-config` flag still uses `pageserver
--config-override` under the hood. In the future, neon_local should just
write the `pageserver.toml` directly.
The `NeonEnvBuilder.pageserver_config_override` field should be renamed
to `pageserver_initial_config`. Let's save this churn for a separate
refactor commit.
## Problem
We were matching on `/tenant/:tenant_id` and
`/tenant/:tenant_id/timeline*`, but not non-timeline tenant sub-paths.
There aren't many: this was only noticeable when using the
synthetic_size endpoint by hand.
## Summary of changes
- Change the wildcard from `/tenant/:tenant_id/timeline*` to
`/tenant/:tenant_id/*`
- Add test lines that exercise this
## Problem
Issues around operation and tenant locks would have been hard to debug
since there was little observability around them.
## Summary of changes
- As suggested in the issue, a wrapper was added around
`OwnedRwLockWriteGuard` called `IdentifierLock` that removes the
operation currently holding the exclusive lock when it's dropped.
- The value in `IdLockMap` was extended to hold a pair of locks and
operations that can be accessed and locked independently.
- When requesting an exclusive lock besides returning the lock on that
resource, an operation is changed if the lock is acquired.
Closes https://github.com/neondatabase/neon/issues/7108
## Problem
Sometimes we have test data in the form of S3 contents that we would
like to run live in a neon_local environment.
## Summary of changes
- Add a storage controller API that imports an existing tenant.
Currently this is equivalent to doing a create with a high generation
number, but in future this would be something smarter to probe S3 to
find the shards in a tenant and find generation numbers.
- Add a `neon_local` command that invokes the import API, and then
inspects timelines in the newly attached tenant to create matching
branches.
## Problem
When we migrate a large existing tenant, we would like to be able to
ensure it has pre-loaded layers onto a pageserver managed by the storage
controller.
## Summary of changes
- Add `storcon_cli tenant-warmup`, which configures the tenant into
PlacementPolicy::Secondary (unless it's already attached), and then
polls the secondary download API reporting progress.
- Extend a test case to check that when onboarding with a secondary
location pre-created, we properly use that location for our first
attachment.
This is the other main failure mode called out in #6092 , that the test
can shut down the pageserver while it has "future layers" in the index,
and that this results in unexpected stats after restart.
We can avoid this nondeterminism by shutting down the endpoint, flushing
everything from SK to PS, checkpointing, and then waiting for that final
LSN to be uploaded. This is more heavyweight than most of our tests
require, but useful in the case of tests that expect a particular
behavior after restart wrt layer deletions.
The binary etc were renamed some time ago, but the path in the source
tree remained "attachment_service" to avoid disruption to ongoing PRs.
There aren't any big PRs out right now, so it's a good time to cut over.
- Rename `attachment_service` to `storage_controller`
- Move it to the top level for symmetry with `storage_broker` & to avoid
mixing the non-prod neon_local stuff (`control_plane/`) with the storage
controller which is a production component.
