`cargo deny` was complaining the version 0.8.3 was yanked (for possible
DoS attack [wiki]), but the latest version (0.8.5) also includes aarch64
fixes which may or may not be relevant. Our usage of ahash limits to
proxy, but I don't think we are at any risk.
[wiki]: https://github.com/tkaitchuck/aHash/wiki/Yanked-versions
## Problem
A user can perform many database connections at the same instant of time
- these will all cache miss and materialise as requests to the control
plane. #5705
## Summary of changes
I am using a `DashMap` (a sharded `RwLock<HashMap>`) of endpoints ->
semaphores to apply a limiter. If the limiter is enabled (permits > 0),
the semaphore will be retrieved per endpoint and a permit will be
awaited before continuing to call the wake_compute endpoint.
### Important details
This dashmap would grow uncontrollably without maintenance. It's not a
cache so I don't think an LRU-based reclamation makes sense. Instead,
I've made use of the sharding functionality of DashMap to lock a single
shard and clear out unused semaphores periodically.
I ran a test in release, using 128 tokio tasks among 12 threads each
pushing 1000 entries into the map per second, clearing a shard every 2
seconds (64 second epoch with 32 shards). The endpoint names were
sampled from a gamma distribution to make sure some overlap would occur,
and each permit was held for 1ms. The histogram for time to clear each
shard settled between 256-512us without any variance in my testing.
Holding a lock for under a millisecond for 1 of the shards does not
concern me as blocking
## Problem
Currently, we aren't doing any explicit slowdown in response to 429
responses. Recently, as we hit remote storage a bit harder (pageserver
does more ListObjectsv2 requests than it used to since #5580 ), we're
seeing storms of 429 responses that may be the result of not just doing
too may requests, but continuing to do those extra requests without
backing off any more than our usual backoff::exponential.
## Summary of changes
Switch from AWS's "Standard" retry policy to "Adaptive" -- docs describe
this as experimental but it has been around for a long time. The main
difference between Standard and Adaptive is that Adaptive rate-limits
the client in response to feedback from the server, which is meant to
avoid scenarios where the client would otherwise repeatedly hit
throttling responses.
neondatabase/autoscaling builds libs/vm-monitor during CI because it's a
necessary component of autoscaling.
workspace_hack includes a lot of crates that are not necessary for
vm-monitor, which artificially inflates the build time on the
autoscaling side, so hopefully removing the dependency should speed
things up.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
For quickly rotating JWT secrets, we want to be able to reload the JWT
public key file in the pageserver, and also support multiple JWT keys.
See #4897.
## Summary of changes
* Allow directories for the `auth_validation_public_key_path` config
param instead of just files. for the safekeepers, all of their config options
also support multiple JWT keys.
* For the pageservers, make the JWT public keys easily globally swappable
by using the `arc-swap` crate.
* Add an endpoint to the pageserver, triggered by a POST to
`/v1/reload_auth_validation_keys`, that reloads the JWT public keys from
the pre-configured path (for security reasons, you cannot upload any
keys yourself).
Fixes#4897
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Improve the serde impl for several types (`Lsn`, `TenantId`,
`TimelineId`) by making them sensitive to
`Serializer::is_human_readadable` (true for json, false for bincode).
Fixes#3511 by:
- Implement the custom serde for `Lsn`
- Implement the custom serde for `Id`
- Add the helper module `serde_as_u64` in `libs/utils/src/lsn.rs`
- Remove the unnecessary attr `#[serde_as(as = "DisplayFromStr")]` in
all possible structs
Additionally some safekeeper types gained serde tests.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
The scrubber didn't know how to find the latest index_part when
generations were in use.
## Summary of changes
- Teach the scrubber to do the same dance that pageserver does when
finding the latest index_part.json
- Teach the scrubber how to understand layer files with generation
suffixes.
- General improvement to testability: scan_metadata has a machine
readable output that the testing `S3Scrubber` wrapper can read.
- Existing test coverage of scrubber was false-passing because it just
didn't see any data due to prefixing of data in the bucket. Fix that.
This is incremental improvement: the more confidence we can have in the
scrubber, the more we can use it in integration tests to validate the
state of remote storage.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Neon doesn't compile on nightly and had numerous clippy complaints.
## Summary of changes
1. Fixed troublesome dependency
2. Fixed or ignored the lints where appropriate
Create Rust bindings for C functions from walproposer. This allows to
write better tests with real walproposer code without spawning multiple
processes and starting up the whole environment.
`make walproposer-lib` stage was added to build static libraries
`libwalproposer.a`, `libpgport.a`, `libpgcommon.a`. These libraries can
be statically linked to any executable to call walproposer functions.
`libs/walproposer/src/walproposer.rs` contains
`test_simple_sync_safekeepers` to test that walproposer can be called
from Rust to emulate sync_safekeepers logic. It can also be used as a
usage example.
## Problem
Transactions break connections in the pool
fixes#4698
## Summary of changes
* Pool `Client`s are smart object that return themselves to the pool
* Pool `Client`s can be 'discard'ed
* Pool `Client`s are discarded when certain errors are encountered.
* Pool `Client`s are discarded when ReadyForQuery returns a non-idle
state.
Adds prototype-level support for [Azure blob storage](https://azure.microsoft.com/en-us/products/storage/blobs). Some corners were cut, see the TODOs and the followup issue #5567 for details.
Steps to try it out:
* Create a storage account with block blobs (this is a per-storage
account setting).
* Create a container inside that storage account.
* Set the appropriate env vars: `AZURE_STORAGE_ACCOUNT,
AZURE_STORAGE_ACCESS_KEY, REMOTE_STORAGE_AZURE_CONTAINER,
REMOTE_STORAGE_AZURE_REGION`
* Set the env var `ENABLE_REAL_AZURE_REMOTE_STORAGE=y` and run `cargo
test -p remote_storage azure`
Fixes #5562
Fixes#4689 by replacing all of `std::Path` , `std::PathBuf` with
`camino::Utf8Path`, `camino::Utf8PathBuf` in
- pageserver
- safekeeper
- control_plane
- libs/remote_storage
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
I've noticed that `hermit-abi`
0.3.1 [1] has been yanked from crates.io (looks like nothing too
bad [2]).
Also, we have 2 versions of `hermit-api` in dependencies (0.3.* and
0.2.*), update `num-cpus` to use the latest `hermit-api` 0.3.3.
- [1] https://crates.io/crates/hermit-abi/0.3.1
- [2] https://github.com/hermit-os/hermit-rs/issues/436
## Summary of changes
- `cargo update -p num-cpus`
- `cargo update -p hermit-abi`
- Unignore `RUSTSEC-2023-0052` in `deny.toml` (it has been fixed in
https://github.com/neondatabase/neon/pull/5069)
## Problem
We need to count metrics always when a connection is open. Not only when
the transfer is 0.
We also need to count bytes usage for HTTP.
## Summary of changes
New structure for usage metrics. A `DashMap<Ids, Arc<Counters>>`.
If the arc has 1 owner (the map) then I can conclude that no connections
are open.
If the counters has "open_connections" non zero, then I can conclude a
new connection was opened in the last interval and should be reported
on.
Also, keep count of how many bytes processed for HTTP and report it
here.
Fixes#5072. See proof from
https://github.com/neondatabase/neon/issues/5072#issuecomment-1735580798.
Turns out multiple threads can get the same nanoseconds since epoch, so
switch to using millis (for finding the prefix later on) and randomness
via `thread_rng` (protect against adversial ci runners).
Also changes the "per test looking alike" prefix to more "general"
prefix.
## Problem
- #5050
Closes: https://github.com/neondatabase/neon/issues/5136
## Summary of changes
- A new configuration property `control_plane_api` controls other
functionality in this PR: if it is unset (default) then everything still
works as it does today.
- If `control_plane_api` is set, then on startup we call out to control
plane `/re-attach` endpoint to discover our attachments and their
generations. If an attachment is missing from the response we implicitly
detach the tenant.
- Calls to pageserver `/attach` API may include a `generation`
parameter. If `control_plane_api` is set, then this parameter is
mandatory.
- RemoteTimelineClient's loading of index_part.json is generation-aware,
and will try to load the index_part with the most recent generation <=
its own generation.
- The `neon_local` testing environment now includes a new binary
`attachment_service` which implements the endpoints that the pageserver
requires to operate. This is on by default if running `cargo neon` by
hand. In `test_runner/` tests, it is off by default: existing tests
continue to run with in the legacy generation-less mode.
Caveats:
- The re-attachment during startup assumes that we are only re-attaching
tenants that have previously been attached, and not totally new tenants
-- this relies on the control plane's attachment logic to keep retrying
so that we should eventually see the attach API call. That's important
because the `/re-attach` API doesn't tell us which timelines we should
attach -- we still use local disk state for that. Ref:
https://github.com/neondatabase/neon/issues/5173
- Testing: generations are only enabled for one integration test right
now (test_pageserver_restart), as a smoke test that all the machinery
basically works. Writing fuller tests that stress tenant migration will
come later, and involve extending our test fixtures to deal with
multiple pageservers.
- I'm not in love with "attachment_service" as a name for the neon_local
component, but it's not very important because we can easily rename
these test bits whenever we want.
- Limited observability when in re-attach on startup: when I add
generation validation for deletions in a later PR, I want to wrap up the
control plane API calls in some small client class that will expose
metrics for things like errors calling the control plane API, which will
act as a strong red signal that something is not right.
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
- Scrubber's `tidy` command requires presence of a control plane
- Scrubber has no tests at all
## Summary of changes
- Add re-usable async streams for reading metadata from a bucket
- Add a `scan-metadata` command that reads from those streams and calls
existing `checks.rs` code to validate metadata, then returns a summary
struct for the bucket. Command returns nonzero status if errors are
found.
- Add an `enable_scrub_on_exit()` function to NeonEnvBuilder so that
tests using remote storage can request to have the scrubber run after
they finish
- Enable remote storarge and scrub_on_exit in test_pageserver_restart
and test_pageserver_chaos
This is a "toe in the water" of the overall space of validating the
scrubber. Later, we should:
- Enable scrubbing at end of tests using remote storage by default
- Make the success condition stricter than "no errors": tests should
declare what tenants+timelines they expect to see in the bucket (or
sniff these from the functions tests use to create them) and we should
require that the scrubber reports on these particular tenants/timelines.
The `tidy` command is untouched in this PR, but it should be refactored
later to use similar async streaming interface instead of the current
batch-reading approach (the streams are faster with large buckets), and
to also be covered by some tests.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
## Problem
The S3 scrubber currently lives at
https://github.com/neondatabase/s3-scrubber
We don't have tests that use it, and it has copies of some data
structures that can get stale.
## Summary of changes
- Import the s3-scrubber as `s3_scrubber/
- Replace copied_definitions/ in the scrubber with direct access to the
`utils` and `pageserver` crates
- Modify visibility of a few definitions in `pageserver` to allow the
scrubber to use them
- Update scrubber code for recent changes to `IndexPart`
- Update `KNOWN_VERSIONS` for IndexPart and move the definition into
index.rs so that it is easier to keep up to date
As a future refinement, it would be good to pull the remote persistence
types (like IndexPart) out of `pageserver` into a separate library so
that the scrubber doesn't have to link against the whole pageserver, and
so that it's clearer which types need to be public.
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
The `EphemeralFile::write_blob` function accesses the page cache
internally. We want to require `async` for these accesses in #5023.
## Summary of changes
This removes the implementaiton of the `BlobWriter` trait for
`EphemeralFile` and turns the `write_blob` function into an inherent
function. We can then make it async as well as the `push_bytes`
function. We move the `SER_BUFFER` thread-local into the
`InMemoryLayerInner` so that the same buffer can be accessed by
different threads as the async is (potentially) moved between threads.
Part of #4743, preparation for #5023.
## Problem
Currently, anything that uses backoff::retry will delay the join of its
task by however long its backoff sleep is, multiplied by its max
retries.
Whenever we call a function that sleeps, we should be passing in a
CancellationToken.
## Summary of changes
- Add a `Cancel` type to backoff::retry that wraps a CancellationToken
and an error `Fn` to generate an error if the cancellation token fires.
- In call sites that already run in a `task_mgr` task, use
`shutdown_token()` to provide the token. In other locations, use a dead
`CancellationToken` to satisfy the interface, and leave a TODO to fix it
up when we broaden the use of explicit cancellation tokens.
## Problem
cargo deny lint broken
Links to the CVEs:
[rustsec.org/advisories/RUSTSEC-2023-0052](https://rustsec.org/advisories/RUSTSEC-2023-0052)
[rustsec.org/advisories/RUSTSEC-2023-0053](https://rustsec.org/advisories/RUSTSEC-2023-0053)
One is fixed, the other one isn't so we allow it (for now), to unbreak
CI. Then later we'll try to get rid of webpki in favour of the rustls
fork.
## Summary of changes
```
+ignore = ["RUSTSEC-2023-0052"]
```
Don't download ext_index.json from s3, but instead receive it as a part of spec from control plane.
This eliminates s3 access for most compute starts,
and also allows us to update extensions spec on the fly
## Problem
As documented, the global connection pool will be high contention.
## Summary of changes
Use DashMap rather than Mutex<HashMap>.
Of note, DashMap currently uses a RwLock internally, but it's partially
sharded to reduce contention by a factor of N. We could potentially use
flurry which is a port of Java's concurrent hashmap, but I have no good
understanding of it's performance characteristics. Dashmap is at least
equivalent to hashmap but less contention.
See the read heavy benchmark to analyse our expected performance
<https://github.com/xacrimon/conc-map-bench#ready-heavy>
I also spoke with the developer of dashmap recently, and they are
working on porting the implementation to use concurrent HAMT FWIW
We don't know how our s3 remote_storage is performing, or if it's
blocking the shutdown. Well, for sampling reasons, we will not really
know even after this PR.
Add metrics:
- align remote_storage metrics towards #4813 goals
- histogram
`remote_storage_s3_request_seconds{request_type=(get_object|put_object|delete_object|list_objects),
result=(ok|err|cancelled)}`
- histogram `remote_storage_s3_wait_seconds{request_type=(same kinds)}`
- counter `remote_storage_s3_cancelled_waits_total{request_type=(same
kinds)}`
Follow-up work:
- After release, remove the old metrics, migrate dashboards
Histogram buckets are rough guesses, need to be tuned. In pageserver we
have a download timeout of 120s, so I think the 100s bucket is quite
nice.
Add infrastructure to dynamically load postgres extensions and shared libraries from remote extension storage.
Before postgres start downloads list of available remote extensions and libraries, and also downloads 'shared_preload_libraries'. After postgres is running, 'compute_ctl' listens for HTTP requests to load files.
Postgres has new GUC 'extension_server_port' to specify port on which 'compute_ctl' listens for requests.
When PostgreSQL requests a file, 'compute_ctl' downloads it.
See more details about feature design and remote extension storage layout in docs/rfcs/024-extension-loading.md
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alek Westover <alek.westover@gmail.com>
This PR adds support for non-interactive transaction query endpoint.
It accepts an array of queries and parameters and returns an array of
query results. The queries will be run in a single transaction one
after another on the proxy side.
In #4743, we'd like to convert the read path to use `async` rust. In
preparation of that, this PR switches some functions that are calling
lower level functions like `BlockReader::read_blk`,
`BlockCursor::read_blob`, etc into `async`. The PR does not switch all
functions however, and only focuses on the ones which are easy to
switch.
This leaves around some async functions that are (currently)
unnecessarily `async`, but on the other hand it makes future changes
smaller in diff.
Part of #4743 (but does not completely address it).
## Problem
We use a patched version of `sharded-slab` with increased MAX_THREADS
[1]. It is not required anymore because safekeepers are async now.
A valid comment from the original PR tho [1]:
> Note that patch can affect other rust services, not only the
safekeeper binary.
- [1] https://github.com/neondatabase/neon/pull/4122
## Summary of changes
- Remove patch for `sharded-slab`
## Problem
`cargo +nightly doc` is giving a lot of warnings: broken links, naked
URLs, etc.
## Summary of changes
* update the `proc-macro2` dependency so that it can compile on latest
Rust nightly, see https://github.com/dtolnay/proc-macro2/pull/391 and
https://github.com/dtolnay/proc-macro2/issues/398
* allow the `private_intra_doc_links` lint, as linking to something
that's private is always more useful than just mentioning it without a
link: if the link breaks in the future, at least there is a warning due
to that. Also, one might enable
[`--document-private-items`](https://doc.rust-lang.org/cargo/commands/cargo-doc.html#documentation-options)
in the future and make these links work in general.
* fix all the remaining warnings given by `cargo +nightly doc`
* make it possible to run `cargo doc` on stable Rust by updating
`opentelemetry` and associated crates to version 0.19, pulling in a fix
that previously broke `cargo doc` on stable:
https://github.com/open-telemetry/opentelemetry-rust/pull/904
* Add `cargo doc` to CI to ensure that it won't get broken in the
future.
Fixes#2557
## Future work
* Potentially, it might make sense, for development purposes, to publish
the generated rustdocs somewhere, like for example [how the rust
compiler does
it](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_driver/index.html).
I will file an issue for discussion.
## Problem
Binaries created from PRs (both in docker images and for tests) have
wrong git-env versions, they point to phantom merge commits.
## Summary of changes
- Prefer GIT_VERSION env variable even if git information was accessible
- Use `${{ github.event.pull_request.head.sha || github.sha }}` instead
of `${{ github.sha }}` for `GIT_VERSION` in workflows
So the builds will still happen from this phantom commit, but we will
report the PR commit.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
While pbkdf2 is a simple algorithm, we should probably use a well tested
implementation
## Summary of changes
* Use pbkdf2 crate
* Use arrays like the hmac comment says
## Checklist before requesting a review
- [X] I have performed a self-review of my code.
- [X] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Allure does not support ansi colored logs, yet `compute_ctl` has them.
Upgrade criterion to get rid of atty dependency, disable ansi colors,
remove atty dependency and disable ansi feature of tracing-subscriber.
This is a heavy-handed approach. I am not aware of a workflow where
you'd want to connect a terminal directly to for example `compute_ctl`,
usually you find the logs in a file. If someone had been using colors,
they will now need to:
- turn the `tracing-subscriber.default-features` to `true`
- edit their wanted project to have colors
I decided to explicitly disable ansi colors in case we would have in
future a dependency accidentally enabling the feature on
`tracing-subscriber`, which would be quite surprising but not
unimagineable.
By getting rid of `atty` from dependencies we get rid of
<https://github.com/advisories/GHSA-g98v-hv3f-hcfr>.
## Problem
#4528
## Summary of changes
Add a 60 seconds default timeout to the reqwest client
Add retries for up to 3 times to call into the metric consumption
endpoint
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
