Add wrappers for a few commands that didn't have them before. Move the
logic to generate tenant and timeline IDs from NeonCli to the callers,
so that NeonCli is more purely just a type-safe wrapper around
'neon_local'.
Part of #7497, closes https://github.com/neondatabase/neon/issues/8890.
## Problem
Since leases are in-memory objects, we need to take special care of them
after pageserver restarts and while doing a live migration. The approach
we took for pageserver restart is to wait for at least lease duration
before doing first GC. We want to do the same for live migration. Since
we do not do any GC when a tenant is in `AttachedStale` or
`AttachedMulti` mode, only the transition from `AttachedMulti` to
`AttachedSingle` requires this treatment.
## Summary of changes
- Added `lsn_lease_deadline` field in `GcBlock::reasons`: the tenant is
temporarily blocked from GC until we reach the deadline. This
information does not persist to S3.
- In `GCBlock::start`, skip the GC iteration if we are blocked by the
lsn lease deadline.
- In `TenantManager::upsert_location`, set the lsn_lease_deadline to
`Instant::now() + lsn_lease_length` so the granted leases have a chance
to be renewed before we run GC for the first time after transitioned
from AttachedMulti to AttachedSingle.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
When generations were new, these messages were an important way of
noticing if something unexpected was going on. We found some real issues
when investigating tests that unexpectedly tripped them.
At time has gone on, this code is now pretty battle-tested, and as we do
more live migrations etc, it's fairly normal to see the occasional
message from a node with a stale generation.
At this point the cognitive load on developers to selectively allow-list
these logs outweighs the benefit of having them at warn severity.
Closes: https://github.com/neondatabase/neon/issues/8080
## Summary of changes
- Downgrade "Dropped remote consistent LSN updates" and "Dropping stale
deletions" messages to INFO
- Remove all the allow-list entries for these logs.
## Problem
These APIs have been deprecated for some time, but were still used from
test code.
Closes: https://github.com/neondatabase/neon/issues/4282
## Summary of changes
- It is still convenient to do a "tenant_attach" from a test without
having to write out a location_conf body, so those test methods have
been retained with implementations that call through to their
location_conf equivalent.
## Problem
These APIs have be unused for some time. They were superseded by
/location_conf: the equivalent of ignoring a tenant is now to put it in
secondary mode.
## Summary of changes
- Remove APIs
- Remove tests & helpers that used them
- Remove error variants that are no longer needed.
## Problem
- Because GC exposes all errors as an anyhow::Error, we have
intermittent issues with spurious log errors during shutdown, e.g. in
this failure of a performance test
https://neon-github-public-dev.s3.amazonaws.com/reports/main/9300804302/index.html#suites/07874de07c4a1c9effe0d92da7755ebf/214a2154f6f0217a/
```
Gc failed 1 times, retrying in 2s: shutting down
```
GC really doesn't do a lot of complicated IO: it doesn't benefit from
the backtrace capabilities of anyhow::Error, and can be expressed more
robustly as an enum.
## Summary of changes
- Add GcError type and use it instead of anyhow::Error in GC functions
- In `gc_iteration_internal`, return GcError::Cancelled on shutdown
rather than Ok(()) (we only used Ok before because we didn't have a
clear cancellation error variant to use).
- In `gc_iteration_internal`, skip past timelines that are shutting
down, to avoid having to go through another GC iteration if we happen to
see a deleting timeline during a GC run.
- In `refresh_gc_info_internal`, avoid an error case where a timeline
might not be found after being looked up, by carrying an Arc<Timeline>
instead of a TimelineId between the first loop and second loop in the
function.
- In HTTP request handler, handle Cancelled variants as 503 instead of
turning all GC errors into 500s.
## Problem
Sometimes we have test data in the form of S3 contents that we would
like to run live in a neon_local environment.
## Summary of changes
- Add a storage controller API that imports an existing tenant.
Currently this is equivalent to doing a create with a high generation
number, but in future this would be something smarter to probe S3 to
find the shards in a tenant and find generation numbers.
- Add a `neon_local` command that invokes the import API, and then
inspects timelines in the newly attached tenant to create matching
branches.
Extracted from https://github.com/neondatabase/neon/pull/6953
Part of https://github.com/neondatabase/neon/issues/5899
Core Change
-----------
In #6953, we need the ability to scan the log _after_ a specific line
and ignore anything before that line.
This PR changes `log_contains` to returns a tuple of `(matching line,
cursor)`.
Hand that cursor to a subsequent `log_contains` call to search the log
for the next occurrence of the pattern.
Other Changes
-------------
- Inspect all the callsites of `log_contains` to handle the new tuple
return type.
- Above inspection unveiled many callers aren't using `assert
log_contains(...) is not None` but some weaker version of the code that
breaks if `log_contains` ever returns a not-None but falsy value. Fix
that.
- Above changes unveiled that `test_remote_storage_upload_queue_retries`
was using `wait_until` incorrectly; after fixing the usage, I had to
raise the `wait_until` timeout. So, maybe this will fix its flakiness.
Before tenant migration it made sense to leak broken tenants in the
metrics until restart. Nowdays it makes less sense because on
cancellations we set the tenant broken. The set metric still allows
filterable alerting.
Fixes: #6507
## Problem
The code for tenant create and tenant attach was just a special case of
what upsert_location does.
## Summary of changes
- Use `upsert_location` for create and attach APIs
- Clean up error handling in upsert_location so that it can generate
appropriate HTTP response codes
- Update tests that asserted the old non-idempotent behavior of attach
- Rework the `test_ignore_while_attaching` test, and fix tenant shutdown
during activation, which this test was supposed to cover, but it was
actually just waiting for activation to complete.
## Problem
`black` is slow sometimes, we can replace it with `ruff format` (a new
feature in 0.1.2 [0]), which produces pretty similar to black style [1].
On my local machine (MacBook M1 Pro 16GB):
```
# `black` on main
$ hyperfine "BLACK_CACHE_DIR=/dev/null poetry run black ."
Benchmark 1: BLACK_CACHE_DIR=/dev/null poetry run black .
Time (mean ± σ): 3.131 s ± 0.090 s [User: 5.194 s, System: 0.859 s]
Range (min … max): 3.047 s … 3.354 s 10 runs
```
```
# `ruff format` on the current PR
$ hyperfine "RUFF_NO_CACHE=true poetry run ruff format"
Benchmark 1: RUFF_NO_CACHE=true poetry run ruff format
Time (mean ± σ): 300.7 ms ± 50.2 ms [User: 259.5 ms, System: 76.1 ms]
Range (min … max): 267.5 ms … 420.2 ms 10 runs
```
## Summary of changes
- Replace `black` with `ruff format` everywhere
- [0] https://docs.astral.sh/ruff/formatter/
- [1] https://docs.astral.sh/ruff/formatter/#black-compatibility
Repeated calls to `.append` don't line up as nicely as they might get
formatted in different ways. Also, it is more characters and the lines
might be longer.
Saw this while working on #5912.
## Problem
This was wasting resources: if we run a test with mock s3 we don't then
need to run it again with local fs. When we're running in CI, we don't
need to run with the mock/local storage as well as real S3. There is
some value in having CI notice/spot issues that might otherwise only
happen when running locally, but that doesn't justify the cost of
running the tests so many more times on every PR.
## Summary of changes
- For tests that used available_remote_storages or
available_s3_storages, update them to either specify no remote storage
(therefore inherit the default, which is currently local fs), or to
specify s3_storage() for the tests that actually want an S3 API.
## Problem
Some existing tests are written in a way that's incompatible with tenant
generations.
## Summary of changes
Update all the tests that need updating: this is things like calling
through the NeonPageserver.tenant_attach helper to get a generation
number, instead of calling directly into the pageserver API. There are
various more subtle cases.
## Problem
Traditionally we would detach/attach directly with curl if we wanted to
"reboot" a single tenant. That's kind of inconvenient these days,
because one needs to know a generation number to issue an attach
request.
Closes: https://github.com/neondatabase/neon/issues/6011
## Summary of changes
- Introduce a new `/reset` API, which remembers the LocationConf from
the current attachment so that callers do not have to work out the
correct configuration/generation to use.
- As an additional support tool, allow an optional `drop_cache` query
parameter, for situations where we are concerned that some on-disk state
might be bad and want to clear that as well as the in-memory state.
One might wonder why I didn't call this "reattach" -- it's because
there's already a PS->CP API of that name and it could get confusing.
This change brings down incremental compilation for me
from > 1min to 10s (and this is a pretty old Ryzen 1700X).
More details: "incremental compilation" here means to change one
character
in the `failed to read value from offset` string in `image_layer.rs`.
The command for incremental compilation is `cargo build_testing`.
The system on which I got these numbers uses `mold` via
`~/.cargo/config.toml`.
As a bonus, `rust-gdb` is now at least a little fun again.
Some tests are timing out in debug builds due to these changes.
This PR makes them skip for debug builds.
We run both with debug and release build, so, the loss of coverage is
marginal.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Follows on from #5299
- We didn't have a generic way to protect a tenant undergoing changes:
`Tenant` had states, but for our arbitrary transitions between
secondary/attached, we need a general way to say "reserve this tenant
ID, and don't allow any other ops on it, but don't try and report it as
being in any particular state".
- The TenantsMap structure was behind an async RwLock, but it was never
correct to hold it across await points: that would block any other
changes for all tenants.
## Summary of changes
- Add the `TenantSlot::InProgress` value. This means:
- Incoming administrative operations on the tenant should retry later
- Anything trying to read the live state of the tenant (e.g. a page
service reader) should retry later or block.
- Store TenantsMap in `std::sync::RwLock`
- Provide an extended `get_active_tenant_with_timeout` for page_service
to use, which will wait on InProgress slots as well as non-active
tenants.
Closes: https://github.com/neondatabase/neon/issues/5378
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The pageserver had two ways of loading a tenant:
- `spawn_load` would trust on-disk content to reflect all existing
timelines
- `spawn_attach` would list timelines in remote storage.
It was incorrect for `spawn_load` to trust local disk content, because
it doesn't know if the tenant might have been attached and written
somewhere else. To make this correct would requires some generation
number checks, but the payoff is to avoid one S3 op per tenant at
startup, so it's not worth the complexity -- it is much simpler to have
one way to load a tenant.
## Summary of changes
- `Tenant` objects are always created with `Tenant::spawn`: there is no
more distinction between "load" and "attach".
- The ability to run without remote storage (for `neon_local`) is
preserved by adding a branch inside `attach` that uses a fallback
`load_local` if no remote_storage is present.
- Fix attaching a tenant when it has a timeline with no IndexPart: this
can occur if a newly created timeline manages to upload a layer before
it has uploaded an index.
- The attach marker file that used to indicate whether a tenant should
be "loaded" or "attached" is no longer needed, and is removed.
- The GenericRemoteStorage interface gets a `list()` method that maps
more directly to what ListObjects does, returning both keys and common
prefixes. The existing `list_files` and `list_prefixes` methods are just
calls into `list()` now -- these can be removed later if we would like
to shrink the interface a bit.
- The remote deletion marker is moved into `timelines/` and detected as
part of listing timelines rather than as a separate GET request. If any
existing tenants have a marker in the old location (unlikely, only
happens if something crashes mid-delete), then they will rely on the
control plane retrying to complete their deletion.
- Revise S3 calls for timeline listing and tenant load to take a
cancellation token, and retry forever: it never makes sense to make a
Tenant broken because of a transient S3 issue.
## Breaking changes
- The remote deletion marker is moved from `deleted` to
`timelines/deleted` within the tenant prefix. Markers in the old
location will be ignored: it is the control plane's responsibility to
retry deletions until they succeed. Markers in the new location will be
tolerated by the previous release of pageserver via
https://github.com/neondatabase/neon/pull/5632
- The local `attaching` marker file is no longer written. Therefore, if
the pageserver is downgraded after running this code, the old pageserver
will not be able to distinguish between partially attached tenants and
fully attached tenants. This would only impact tenants that were partway
through attaching at the moment of downgrade. In the unlikely even t
that we do experience an incident that prompts us to roll back, then we
may check for attach operations in flight, and manually insert
`attaching` marker files as needed.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
- QueryError always logged at error severity, even though disconnections
are not true errors.
- QueryError type is not expressive enough to distinguish actual errors
from shutdowns.
- In some functions we're returning Ok(()) on shutdown, in others we're
returning an error
## Summary of changes
- Add QueryError::Shutdown and use it in places we check for
cancellation
- Adopt consistent Result behavior: disconnects and shutdowns are always
QueryError, not ok
- Transform shutdown+disconnect errors to Ok(()) at the very top of the
task that runs query handler
- Use the postgres protocol error code for "admin shutdown" in responses
to clients when we are shutting down.
Closes: #5517
Fixes#5172 as it:
- removes recoinciliation with remote index_part.json and accepts remote
index_part.json as the truth, deleting any local progress which is yet
to be reflected in remote
- moves to prefer remote metadata
Additionally:
- tests with single LOCAL_FS parametrization are cleaned up
- adds a test case for branched (non-bootstrap) local only timeline
availability after restart
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: John Spray <john@neon.tech>
## Problem
Writes to the postgres client socket from the page server were not
wrapped in cancellation handling, so a stuck client connection could
prevent tenant shutdowwn.
## Summary of changes
All the places we call flush() to write to the socket, we should be
respecting the cancellation token for the task.
In this PR, I explicitly pass around a CancellationToken rather than
doing inline `task_mgr::shutdown_token` calls, to avoid coupling it to
the global task_mgr state and make it easier to refactor later.
I have some follow-on commits that add a Shutdown variant to QueryError
and use it more extensively, but that's pure refactor so will keep
separate from this bug fix PR.
Closes: https://github.com/neondatabase/neon/issues/5341
Part of #5172. Builds upon #5243, #5298. Includes the test changes:
- no more RemoteStorageKind.NOOP
- no more testing of pageserver without remote storage
- benchmarks now use LOCAL_FS as well
Support for running without RemoteStorage is still kept but in practice,
there are no tests and should not be any tests.
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
In many places in test code, paths are built manually from what
NeonEnv.tenant_dir and NeonEnv.timeline_dir could do.
## Summary of changes
1. NeonEnv.tenant_dir and NeonEnv.timeline_dir moved under class
NeonPageserver as the path they use is per-pageserver instance.
2. Used these everywhere to replace manual path building
Closes#5258
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Refactor tests to have less globals.
This will allow to hopefully write more complex tests for our new metric
collection requirements in #5297. Includes reverted work from #4761
related to test globals.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: MMeent <matthias@neon.tech>
## Problem
Currently our testing environment only supports running a single
pageserver at a time. This is insufficient for testing failover and
migrations.
- Dependency of writing tests for #5207
## Summary of changes
- `neon_local` and `neon_fixture` now handle multiple pageservers
- This is a breaking change to the `.neon/config` format: any local
environments will need recreating
- Existing tests continue to work unchanged:
- The default number of pageservers is 1
- `NeonEnv.pageserver` is now a helper property that retrieves the first
pageserver if there is only one, else throws.
- Pageserver data directories are now at `.neon/pageserver_{n}` where n
is 1,2,3...
- Compatibility tests get some special casing to migrate neon_local
configs: these are not meant to be backward/forward compatible, but they
were treated that way by the test.
Remote storage cleanup split from #5198:
- pageserver, extensions, and safekeepers now have their separate remote
storage
- RemoteStorageKind has the configuration code
- S3Storage has the cleanup code
- with MOCK_S3, pageserver, extensions, safekeepers use different
buckets
- with LOCAL_FS, `repo_dir / "local_fs_remote_storage" / $user` is used
as path, where $user is `pageserver`, `safekeeper`
- no more `NeonEnvBuilder.enable_xxx_remote_storage` but one
`enable_{pageserver,extensions,safekeeper}_remote_storage`
Should not have any real changes. These will allow us to default to
`LOCAL_FS` for pageserver on the next PR, remove
`RemoteStorageKind.NOOP`, work towards #5172.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Tests using remote storage have manually entered `test_name` parameters,
which:
- Are easy to accidentally duplicate when copying code to make a new
test
- Omit parameters, so don't actually create unique S3 buckets when
running many tests concurrently.
## Summary of changes
- Use the `request` fixture in neon_env_builder fixture to get the test
name, then munge that into an S3 compatible bucket name.
- Remove the explicit `test_name` parameters to enable_remote_storage
## Problem
- https://github.com/neondatabase/neon/issues/5167
## Summary of changes
Accept "will not become active" log line with _either_ Broken or
Stopping state, because we may hit it while in the process of doing the
`/ignore` (earlier in the test than the test expects to see the same
line with Broken)
I made a mistake when I adding `env.initial_timeline:
Optional[TimelineId]` in the #3839, should had just generated it and
used it to create a specific timeline. This PR fixes those mistakes, and
some extra calling into psql which must be slower than python field
access.
## Problem
neon_fixtures.py has grown to unmanageable size. It attracts conflicts.
When adding specific utils under for example `fixtures/pageserver`
things sometimes need to import stuff from `neon_fixtures.py` which
creates circular import. This is usually only needed for type
annotations, so `typing.TYPE_CHECKING` flag can mask the issue.
Nevertheless I believe that splitting neon_fixtures.py into smaller
parts is a better approach.
Currently the PR contains small things, but I plan to continue and move
NeonEnv to its own `fixtures.env` module. To keep the diff small I think
this PR can already be merged to cause less conflicts.
UPD: it looks like currently its not really possible to fully avoid
usage of `typing.TYPE_CHECKING`, because some components directly depend
on each other. I e Env -> Cli -> Env cycle. But its still worth it to
avoid it in as many places as possible. And decreasing neon_fixture's
size still makes sense.
We currently have a timeseries for each of the tenants in different
states. We only want this for Broken. Other states could be counters.
Fix this by making the `pageserver_tenant_states_count` a counter
without a `tenant_id` and
add a `pageserver_broken_tenants_count` which has a `tenant_id` label,
each broken tenant being 1.
## Problem
`cargo +nightly doc` is giving a lot of warnings: broken links, naked
URLs, etc.
## Summary of changes
* update the `proc-macro2` dependency so that it can compile on latest
Rust nightly, see https://github.com/dtolnay/proc-macro2/pull/391 and
https://github.com/dtolnay/proc-macro2/issues/398
* allow the `private_intra_doc_links` lint, as linking to something
that's private is always more useful than just mentioning it without a
link: if the link breaks in the future, at least there is a warning due
to that. Also, one might enable
[`--document-private-items`](https://doc.rust-lang.org/cargo/commands/cargo-doc.html#documentation-options)
in the future and make these links work in general.
* fix all the remaining warnings given by `cargo +nightly doc`
* make it possible to run `cargo doc` on stable Rust by updating
`opentelemetry` and associated crates to version 0.19, pulling in a fix
that previously broke `cargo doc` on stable:
https://github.com/open-telemetry/opentelemetry-rust/pull/904
* Add `cargo doc` to CI to ensure that it won't get broken in the
future.
Fixes#2557
## Future work
* Potentially, it might make sense, for development purposes, to publish
the generated rustdocs somewhere, like for example [how the rust
compiler does
it](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_driver/index.html).
I will file an issue for discussion.
## Problem
Attach failures are not reported in public part of the api (in
`attachment_status` field of TenantInfo).
## Summary of changes
Expose TenantState::Broken as TenantAttachmentStatus::Failed
In the way its written Failed status will be reported even if no
attachment happened. (I e if tenant become broken on startup). This is
in line with other members. I e Active will be resolved to Attached even
if no actual attach took place.
This can be tweaked if needed. At the current stage it would be overengineering without clear motivation
resolves#4344
This adds test coverage for 'compute_ctl', as it is now used by all
the python tests.
There are a few differences in how 'compute_ctl' is called in the
tests, compared to the real web console:
- In the tests, the postgresql.conf file is included as one large
string in the spec file, and it is written out as it is to the data
directory. I added a new field for that to the spec file. The real
web console, however, sets all the necessary settings in the
'settings' field, and 'compute_ctl' creates the postgresql.conf from
those settings.
- In the tests, the information needed to connect to the storage, i.e.
tenant_id, timeline_id, connection strings to pageserver and
safekeepers, are now passed as new fields in the spec file. The real
web console includes them as the GUCs in the 'settings' field. (Both
of these are different from what the test control plane used to do:
It used to write the GUCs directly in the postgresql.conf file). The
plan is to change the control plane to use the new method, and
remove the old method, but for now, support both.
Some tests that were sensitive to the amount of WAL generated needed
small changes, to accommodate that compute_ctl runs the background
health monitor which makes a few small updates. Also some tests shut
down the pageserver, and now that the background health check can run
some queries while the pageserver is down, that can produce a few
extra errors in the logs, which needed to be allowlisted.
Other changes:
- remove obsolete comments about PostgresNode;
- create standby.signal file for Static compute node;
- log output of `compute_ctl` and `postgres` is merged into
`endpoints/compute.log`.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
This is preliminary work for/from #4220 (async
`Layer::get_value_reconstruct_data`).
The motivation is to avoid locking `Tenant::timelines` in places that
can't be `async`, because in #4333 we want to convert Tenant::timelines
from `std::sync::Mutex` to `tokio::sync::Mutex`.
But, the changes here are useful in general because they clean up &
document tenant state transitions.
That also paves the way for #4350, which is an alternative to #4333 that
refactors the pageserver code so that we can keep the
`Tenant::timelines` mutex sync.
This patch consists of the following core insights and changes:
* spawn_load and spawn_attach own the tenant state until they're done
* once load()/attach() calls are done ...
* if they failed, transition them to Broken directly (we know that
there's no background activity because we didn't call activate yet)
* if they succeed, call activate. We can make it infallible. How? Later.
* set_broken() and set_stopping() are changed to wait for spawn_load() /
spawn_attach() to finish.
* This sounds scary because it might hinder detach or shutdown, but
actually, concurrent attach+detach, or attach+shutdown, or
load+shutdown, or attach+shutdown were just racy before this PR.
So, with this change, they're not anymore.
In the future, we can add a `CancellationToken` stored in Tenant to
cancel `load` and `attach` faster, i.e., make `spawn_load` /
`spawn_attach` transition them to Broken state sooner.
See the doc comments on TenantState for the state transitions that are
now possible.
It might seem scary, but actually, this patch reduces the possible state
transitions.
We introduce a new state `TenantState::Activating` to avoid grabbing the
`Tenant::timelines` lock inside the `send_modify` closure.
These were the humble beginnings of this PR (see Motivation section),
and I think it's still the right thing to have this `Activating` state,
even if we decide against async `Tenant::timelines` mutex. The reason is
that `send_modify` locks internally, and by moving locking of
Tenant::timelines out of the closure, the internal locking of
`send_modify` becomes a leaf of the lock graph, and so, we eliminate
deadlock risk.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
With this patch, the attach handler now follows the same pattern as
tenant create with regards to instantiation of the new tenant:
1. Prepare on-disk state using `create_tenant_files`.
2. Use the same code path as pageserver startup to load it into memory
and start background loops (`schedule_local_tenant_processing`).
It's a bit sad we can't use the
`PageServerConfig::tenant_attaching_mark_file_path` method inside
`create_tenant_files` because it operates in a temporary directory.
However, it's a small price to pay for the gained simplicity.
During implementation, I noticed that we don't handle failures post
`create_tenant_files` well. I left TODO comments in the code linking to
the issue that I created for this [^1].
Also, I'll dedupe the spawn_load and spawn_attach code in a future
commit.
refs https://github.com/neondatabase/neon/issues/1555
part of https://github.com/neondatabase/neon/issues/886 (Tenant
Relocation)
[^1]: https://github.com/neondatabase/neon/issues/4233
We use the term "endpoint" in for compute Postgres nodes in the web UI
and user-facing documentation now. Adjust the nomenclature in the code.
This changes the name of the "neon_local pg" command to "neon_local
endpoint". Also adjust names of classes, variables etc. in the python
tests accordingly.
This also changes the directory structure so that endpoints are now
stored in:
.neon/endpoints/<endpoint id>
instead of:
.neon/pgdatadirs/tenants/<tenant_id>/<endpoint (node) name>
The tenant ID is no longer part of the path. That means that you
cannot have two endpoints with the same name/ID in two different
tenants anymore. That's consistent with how we treat endpoints in the
real control plane and proxy: the endpoint ID must be globally unique.
## Describe your changes
Added a query param to detach API
Allow to remove local state of a tenant even if its not in the memory
(following ignore API)
## Issue ticket number and link
#3828
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
## Describe your changes
Add Error enum for tenant state response to allow better error handling
in mgmt api
## Issue ticket number and link
#2238
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
- use parse_metrics() in all places where we parse Prometheus metrics
- query_all: make `filter` argument optional
- encourage using properly parsed, typed metrics by changing get_metrics()
to return already-parsed metrics. The new get_metric_str() method,
like in the Safekeeper type, returns the raw text response.
## Describe your changes
Whenever a tenant is detached or the pageserver is restarted the
pageserver_last_record_lsn metric is dropped
This fix resurrects the value from the metadata whenever the tenant is
attached again
## Issue ticket number and link
[3571](https://github.com/neondatabase/cloud/issues/3571)
## Checklist before requesting a review
- [X] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
