## Problem
Part of #11813
## Summary of changes
The current interval is 30s and it costs a lot of $$$. This patch
reduced it to 600s refresh interval (which means that it takes 10min for
feature flags to propagate from UI to the pageserver). In the future we
can let storcon retrieve the feature flags and push it to pageservers.
We can consider creating a new release or we can postpone this to the
week after the next week.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
In #12217, we began passing the stripe size in reattach responses, and
persisting it in the on-disk state. This is necessary to ensure the
storage controller and Pageserver have a consistent view of the intended
stripe size of unsharded tenants, which will be used for splits that do
not specify a stripe size. However, for backwards compatibility, these
stripe sizes were optional.
## Summary of changes
Make the stripe sizes required for reattach responses and on-disk
location configs. These will always be provided by the previous
(current) release.
Enable it across tests and set it as default. Marks the first milestone
of https://github.com/neondatabase/neon/issues/9114. We already enabled
it in all AWS regions and planning to enable it in all Azure regions
next week.
will merge after we roll out in all regions.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
See #11942
Idea:
* if connections are short lived, they can get enqueued and then also
remove themselves later if they never made it to redis. This reduces the
load on the queue.
* short lived connections (<10m, most?) will only issue 1 command, we
remove the delete command and rely on ttl.
* we can enqueue as many commands as we want, as we can always cancel
the enqueue, thanks to the ~~intrusive linked lists~~ `BTreeMap`.
Introduce a separate `postgres_ffi_types` crate which contains a few
types and functions that were used in the API. `postgres_ffi_types` is a
much small crate than `postgres_ffi`, and it doesn't depend on bindgen
or the Postgres C headers.
Move NeonWalRecord and Value types to wal_decoder crate. They are only
used in the pageserver-safekeeper "ingest" API. The rest of the ingest
API types are defined in wal_decoder, so move these there as well.
- Add optional `?mode=fast|immediate` to `/terminate`, `fast` is
default. Immediate avoids waiting 30
seconds before returning from `terminate`.
- Add `TerminateMode` to `ComputeStatus::TerminationPending`
- Use `/terminate?mode=immediate` in `neon_local` instead of `pg_ctl
stop` for `test_replica_promotes`.
- Change `test_replica_promotes` to check returned LSN
- Annotate `finish_sync_safekeepers` as `noreturn`.
https://github.com/neondatabase/cloud/issues/29807
## Problem
The cache was introduced as a hackathon project and the only supported
limit was the number of entries.
The basebackup entry size may vary. We need to have more control over
disk space usage to ship it to production.
- Part of https://github.com/neondatabase/cloud/issues/29353
## Summary of changes
- Store the size of entries in the cache and use it to limit
`max_total_size_bytes`
- Add the size of the cache in bytes to metrics.
## Problem
Pageservers now expose a gRPC API on a separate address and port. This
must be registered with the storage controller such that it can be
plumbed through to the compute via cplane.
Touches #11926.
## Summary of changes
This patch registers the gRPC address and port with the storage
controller:
* Add gRPC address to `nodes` database table and `NodePersistence`, with
a Diesel migration.
* Add gRPC address in `NodeMetadata`, `NodeRegisterRequest`,
`NodeDescribeResponse`, and `TenantLocateResponseShard`.
* Add gRPC address flags to `storcon_cli node-register`.
These changes are backwards-compatible, since all structs will ignore
unknown fields during deserialization.
## Problem
We would easily hit this limit for a tenant running for enough long
time.
## Summary of changes
Remove the max key limit for time-travel recovery if the command is
running locally.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Part of #11813
PostHog has two endpoints to retrieve feature flags: the old project ID
one that uses personal API token, and the new one using a special
feature flag secure token that can only retrieve feature flag. The new
API I added in this patch is not documented in the PostHog API doc but
it's used in their Python SDK.
## Summary of changes
Add support for "feature flag secure token API". The API has no way of
providing a project ID so we verify if the retrieved spec is consistent
with the project ID specified by comparing the `team_id` field.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The location config (which includes the stripe size) is stored on
pageserver disk.
For unsharded tenants we [do not include the shard identity in the
serialized
description](ad88ec9257/pageserver/src/tenant/config.rs (L64-L66)).
When the pageserver restarts, it reads that configuration and will use
the stripe size from there
and rely on storcon input from reattach for generation and mode.
The default deserialization is ShardIdentity::unsharded. This has the
new default stripe size of 2048.
Hence, for unsharded tenants we can be running with a stripe size
different from that the one in the
storcon observed state. This is not a problem until we shard split
without specifying a stripe size (i.e. manual splits via the UI or
storcon_cli). When that happens the new shards will use the 2048 stripe
size until storcon realises and switches them back. At that point it's
too late, since we've ingested data with the wrong stripe sizes.
## Summary of changes
Ideally, we would always have the full shard identity on disk. To
achieve this over two releases we do:
1. Always persist the shard identity in the location config on the PS.
2. Storage controller includes the stripe size to use in the re attach
response.
After the first release, we will start persisting correct stripe sizes
for any tenant shard that the storage controller
explicitly sends a location_conf. After the second release, the
re-attach change kicks in and we'll persist the
shard identity for all shards.
## Problem
Base64 0.13 is outdated.
## Summary of changes
Update base64 to 0.22. Affects mostly proxy and proxy libs. Also upgrade
serde_with to remove another dep on base64 0.13 from dep tree.
## Problem
part of https://github.com/neondatabase/neon/issues/11813
## Summary of changes
Collect pageserver hostname property so that we can use it in the
PostHog UI. Not sure if this is the best way to do that -- open to
suggestions.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
part of https://github.com/neondatabase/neon/issues/7546
Add Azure time travel recovery support. The tricky thing is how Azure
handles deletes in its blob version API. For the following sequence:
```
upload file_1 = a
upload file_1 = b
delete file_1
upload file_1 = c
```
The "delete file_1" won't be stored as a version (as AWS did).
Therefore, we can never rollback to a state where file_1 is temporarily
invisible. If we roll back to the time before file_1 gets created for
the first time, it will be removed correctly.
However, this is fine for pageservers, because (1) having extra files in
the tenant storage is usually fine (2) for things like
timelines/X/index_part-Y.json, it will only be deleted once, so it can
always be recovered to a correct state. Therefore, I don't expect any
issues when this functionality is used on pageserver recovery.
TODO: unit tests for time-travel recovery.
## Summary of changes
Add Azure blob storage time-travel recovery support.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
PGLB/Neonkeeper needs to separate the concerns of connecting to compute,
and authenticating to compute.
Additionally, the code within `connect_to_compute` is rather messy,
spending effort on recovering the authentication info after
wake_compute.
## Summary of changes
Split `ConnCfg` into `ConnectInfo` and `AuthInfo`. `wake_compute` only
returns `ConnectInfo` and `AuthInfo` is determined separately from the
`handshake`/`authenticate` process.
Additionally, `ConnectInfo::connect_raw` is in-charge or establishing
the TLS connection, and the `postgres_client::Config::connect_raw` is
configured to use `NoTls` which will force it to skip the TLS
negotiation. This should just work.
## Problem
Removed nodes can re-add themselves on restart if not properly
tombstoned. We need a mechanism (e.g. soft-delete flag) to prevent this,
especially in cases where the node is unreachable.
More details there: #12036
## Summary of changes
- Introduced `NodeLifecycle` enum to represent node lifecycle states.
- Added a string representation of `NodeLifecycle` to the `nodes` table.
- Implemented node removal using a tombstone mechanism.
- Introduced `/debug/v1/tombstone*` handlers to manage the tombstone
state.
neon_local's timeline import subcommand creates timelines manually, but
doesn't create them on the safekeepers. If a test then tries to open an
endpoint to read from the timeline, it will error in the new world with
`--timelines-onto-safekeepers`.
Therefore, if that flag is enabled, create the timelines on the
safekeepers.
Note that this import functionality is different from the fast import
feature (https://github.com/neondatabase/neon/issues/10188, #11801).
Part of #11670
As well as part of #11712
The new implementation lives in a separately allocated shared memory
area, which could be resized. Resizing it isn't actually implemented
yet, though. It would require some co-operation from the LFC code.
