misc changes split out from #8855
- **allow cloning the request context in a read-only fashion for
background tasks**
- **propagate endpoint and request context through the jwk cache**
- **only allow password based auth for md5 during testing**
- **remove auth info from conn info**
There's currently no way to just start/stop broker from `neon_local`.
This PR
* adds a sub-command
* uses that sub-command from the test suite instead of the pre-existing
Python `subprocess` based approach.
Found this useful during investigation
https://github.com/neondatabase/cloud/issues/16886.
We added another migration in 5876c441ab,
but didn't bump this value. This had no effect, but best to fix it
anyway.
Signed-off-by: Tristan Partin <tristan@neon.tech>
pg_distrib_dir doesn't include the Postgres version and only depends
on env variables which cannot change during a test run, so it can be
marked as session-scoped. Similarly, the platform cannot change during
a test run.
There was another copy of it in utils.py. The only difference is that
the version in utils.py tolerates files that are concurrently
removed. That seems fine for the few callers in neon_fixtures.py too.
This adds preliminary PG17 support to Neon, based on RC1 / 2024-09-04
07b828e9d4
NOTICE: The data produced by the included version of the PostgreSQL fork
may not be compatible with the future full release of PostgreSQL 17 due to
expected or unexpected future changes in magic numbers and internals.
DO NOT EXPECT DATA IN V17-TENANTS TO BE COMPATIBLE WITH THE 17.0
RELEASE!
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Makes it consistent with the "timeline create" and "timeline import"
commands, which allowed you to pass the timeline id as argument. This
also makes it unnecessary to parse the timeline ID from the output in
the python function that calls it.
The tenant ID was not actually generated here but in NeonEnvBuilder.
And the "neon_local init" command hasn't been able to generate the
initial tenant since 8712e1899e anyway.
I wish it worked, but it's been broken for a long time, so let's admit
defeat and remove it.
The idea of sharing the same pageserver and safekeeper environment
between tests is still sound, and it could save a lot of time in our
CI. We should perhaps put some time into doing that, but we're better
off starting from scratch than trying to make TEST_SHARED_FIXTURES
work in its current form.
For control-plane managed tenants, we have the page in the admin console
that lists all tenants on a specific pageserver. But for
storage-controller managed ones, we don't have that functionality for
now.
## Summary of changes
Adds an API that lists all shards on a given node (intention + observed)
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
When walproposer observes now higher term it restarts instead of
crashing whole compute with PANIC; this avoids compute crash after
term_bump call. After successfull election we're still checking
last_log_term of the highest given vote to ensure basebackup is good,
and PANIC otherwise.
It will be used for migration per
035-safekeeper-dynamic-membership-change.md
and
https://github.com/neondatabase/docs/pull/21
ref https://github.com/neondatabase/neon/issues/8700
## Problem
We want to do AZ aware scheduling, but don't have enough metadata.
## Summary of changes
Introduce a `preferred_az_id` concept for each managed tenant shard.
In a future PR, the scheduler will use this as a soft preference.
The idea is to try and keep the shard attachments within the same AZ.
Under the assumption that the compute was placed in the correct AZ,
this reduces the chances of cross AZ trafic from between compute and PS.
In terms of code changes we:
1. Add a new nullable `preferred_az_id` column to the `tenant_shards`
table. Also include an in-memory counterpart.
2. Populate the preferred az on tenant creation and shard splits.
3. Add an endpoint which allows to bulk-set preferred AZs.
(3) gives us the migration path. I'll write a script which queries the
cplane db in the region and sets the preferred az of all shards with an
active compute to the AZ of said compute. For shards without an active compute,
I'll use the AZ of the currently attached pageserver
since this is what cplane uses now to schedule computes.
## Problem
https://github.com/neondatabase/neon/pull/8852 introduced a new nullable
column for the `nodes` table: `availability_zone_id`
## Summary of changes
* Make neon local and the test suite always provide an az id
* Make the az id field in the ps registration request mandatory
* Migrate the column to non-nullable and adjust in memory state
accordingly
* Remove the code that was used to populate the az id for pre-existing
nodes
Sometimes, the benchmarks fail to start up pageserver in 10s without any
obvious reason. Benchmarks run sequentially on otherwise idle runners.
Try running `sync(2)` after each bench to force a cleaner slate.
Implement this via:
- SYNC_AFTER_EACH_TEST environment variable enabled autouse fixture
- autouse fixture seems to be outermost fixture, so it works as expected
- set SYNC_AFTER_EACH_TEST=true for benchmarks in build_and_test
workflow
Evidence:
https://neon-github-public-dev.s3.amazonaws.com/reports/main/10678984691/index.html#suites/5008d72a1ba3c0d618a030a938fc035c/1210266507534c0f/
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
This PR simplifies the pageserver configuration parsing as follows:
* introduce the `pageserver_api::config::ConfigToml` type
* implement `Default` for `ConfigToml`
* use serde derive to do the brain-dead leg-work of processing the toml
document
* use `serde(default)` to fill in default values
* in `pageserver` crate:
* use `toml_edit` to deserialize the pageserver.toml string into a
`ConfigToml`
* `PageServerConfig::parse_and_validate` then
* consumes the `ConfigToml`
* destructures it exhaustively into its constituent fields
* constructs the `PageServerConfig`
The rules are:
* in `ConfigToml`, use `deny_unknown_fields` everywhere
* static default values go in `pageserver_api`
* if there cannot be a static default value (e.g. which default IO
engine to use, because it depends on the runtime), make the field in
`ConfigToml` an `Option`
* if runtime-augmentation of a value is needed, do that in
`parse_and_validate`
* a good example is `virtual_file_io_engine` or `l0_flush`, both of
which need to execute code to determine the effective value in
`PageServerConf`
The benefits:
* massive amount of brain-dead repetitive code can be deleted
* "unused variable" compile-time errors when removing a config value,
due to the exhaustive destructuring in `parse_and_validate`
* compile-time errors guide you when adding a new config field
Drawbacks:
* serde derive is sometimes a bit too magical
* `deny_unknown_fields` is easy to miss
Future Work / Benefits:
* make `neon_local` use `pageserver_api` to construct `ConfigToml` and
write it to `pageserver.toml`
* This provides more type safety / coompile-time errors than the current
approach.
### Refs
Fixes#3682
### Future Work
* `remote_storage` deser doesn't reject unknown fields
https://github.com/neondatabase/neon/issues/8915
* clean up `libs/pageserver_api/src/config.rs` further
* break up into multiple files, at least for tenant config
* move `models` as appropriate / refine distinction between config and
API models / be explicit about when it's the same
* use `pub(crate)` visibility on `mod defaults` to detect stale values
We currently do not record safekeepers in the storage controller
database. We want to migrate timelines across safekeepers eventually, so
start recording the safekeepers on deploy.
Cc: #8698
Endpoint implementation sends msg to manager requesting to do the
reset. Manager stops current partial backup upload task if it exists and
performs the reset.
Also slightly tweak eviction condition: all full segments before
flush_lsn must be uploaded (and committed) and there must be only one
segment left on disk (partial). This allows to evict timelines which
started not on the first segment and didn't fill the whole
segment (previous condition wasn't good because last_removed_segno was
0).
ref https://github.com/neondatabase/neon/issues/8759
## Problem
Neon local set-up does not inject an az id in `metadata.json`. See real
change in https://github.com/neondatabase/neon/pull/8852.
## Summary of changes
We piggyback on the existing `availability_zone` pageserver
configuration in order to avoid making neon local even more complex.
The test is very rudimentary, it only checks that before and after
tenant deletion, we can run `scan_metadata` for the safekeeper node
kind. Also, we don't actually expect any uploaded data, for that we
don't have enough WAL (needs to create at least one S3-uploaded file,
the scrubber doesn't recognize partial files yet).
The `scan_metadata` scrubber subcommand is extended to support either
specifying a database connection string, which was previously the only
way, and required a database to be present, or specifying the timeline
information manually via json. This is ideal for testing scenarios
because in those, the number of timelines is usually limited,
but it is involved to spin up a database just to write the timeline
information.
## Problem
In order to build AZ aware scheduling, the storage controller needs to
know what AZ pageservers are in.
Related https://github.com/neondatabase/neon/issues/8848
## Summary of changes
This patch set adds a new nullable column to the `nodes` table:
`availability_zone_id`. The node registration
request is extended to include the AZ id (pageservers already have this
in their `metadata.json` file).
If the node is already registered, then we update the persistent and
in-memory state with the provided AZ.
Otherwise, we add the node with the AZ to begin with.
A couple assumptions are made here:
1. Pageserver AZ ids are stable
2. AZ ids do not change over time
Once all pageservers have a configured AZ, we can remove the optionals
in the code and make the database column not nullable.
Part of #8130, closes#8719.
## Problem
Currently, vectored blob io only coalesce blocks if they are immediately
adjacent to each other. When we switch to Direct IO, we need a way to
coalesce blobs that are within the dio-aligned boundary but has gap
between them.
## Summary of changes
- Introduces a `VectoredReadCoalesceMode` for `VectoredReadPlanner` and
`StreamingVectoredReadPlanner` which has two modes:
- `AdjacentOnly` (current implementation)
- `Chunked(<alignment requirement>)`
- New `ChunkedVectorBuilder` that considers batching `dio-align`-sized
read, the start and end of the vectored read will respect
`stx_dio_offset_align` / `stx_dio_mem_align` (`vectored_read.start` and
`vectored_read.blobs_at.first().start_offset` will be two different
value).
- Since we break the assumption that blobs within single `VectoredRead`
are next to each other (implicit end offset), we start to store blob end
offsets in the `VectoredRead`.
- Adapted existing tests to run in both `VectoredReadCoalesceMode`.
- The io alignment can also be live configured at runtime.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Routes and their handlers were in a bit different order in 1) routes
list 2) their implementation 3) python client 4) openapi spec, making
addition of new ones intimidating. Make it the same everywhere, roughly
lexicographically but preserving some of existing logic.
No functional changes.
This PR:
* Implements the rule that archived timelines require all of their
children to be archived as well, as specified in the RFC. There is no
fancy locking mechanism though, so the precondition can still be broken.
As a TODO for later, we still allow unarchiving timelines with archived
parents.
* Adds an `is_archived` flag to `TimelineInfo`
* Adds timeline_archival_config to `PageserverHttpClient`
* Adds a new `test_timeline_archive` test, loosely based on
`test_timeline_delete`
Part of #8088
## Problem
- If a reconciler was waiting to be able to notify computes about a
change, but the control plane was waiting for the controller to finish a
timeline creation/deletion, the overall system can deadlock.
- If a tenant shard was migrated concurrently with a timeline
creation/deletion, there was a risk that the timeline operation could be
applied to a non-latest-generation location, and thereby not really be
persistent. This has never happened in practice, but would eventually
happen at scale.
Closes: #8743
## Summary of changes
- Introduce `Service::tenant_remote_mutation` helper, which looks up
shards & generations and passes them into an inner function that may do
remote I/O to pageservers. Before returning success, this helper checks
that generations haven't incremented, to guarantee that changes are
persistent.
- Convert tenant_timeline_create, tenant_timeline_delete, and
tenant_timeline_detach_ancestor to use this helper.
- These functions no longer block on ensure_attached unless the tenant
was never attached at all, so they should make progress even if we can't
complete compute notifications.
This increases the database load from timeline/create operations, but
only with cheap read transactions.
Going through the list of recent flaky tests, trying to fix those
related to graceful shutdown.
- test_forward_compatibility: flush and wait for uploads to avoid
graceful shutdown
- test_layer_bloating: in the end the endpoint and vanilla are still up
=> immediate shutdown
- test_lagging_sk: pageserver shutdown is not related to the test =>
immediate shutdown
- test_lsn_lease_size: pageserver flushing is not needed => immediate
shutdown
Additionally:
- remove `wait_for_upload` usage from workload fixture
Cc: #8708Fixes: #8710
## Problem
We want to run our regression test suite on ARM.
## Summary of changes
- run regression tests on release ARM builds
- run `build-neon` (including rust tests) on debug ARM builds
- add `arch` parameter to test to distinguish them in the allure report
and in a database
## Problem
The default Postgres version is set to 15 in code, while we use 16 in
most of the other places (and Postgres 17 is coming)
## Summary of changes
- Run `benchmarks` job with Postgres 16 (instead of Postgres 14)
- Set `DEFAULT_PG_VERSION` to 16 in all places
- Remove deprecated `--pg-version` pytest argument
- Update `test_metadata_bincode_serde_ensure_roundtrip` for Postgres 16
Migrates most of the remaining parts of the scrubber to remote_storage:
* `pageserver_physical_gc`
* `scan_metadata` for pageservers (safekeepers were done in #8595)
* `download()` in `tenant_snapshot`. The main `tenant_snapshot` is not
migrated as it uses version history to be able to work in the face of
ongoing changes.
Part of #7547
After the rollout has succeeded, we now set the default image
compression to be enabled.
We also remove its explicit mention from `neon_fixtures.py` added in
#8368 as it is now the default (and we switch to `zstd(1)` which is a
bit nicer on CPU time).
Part of https://github.com/neondatabase/neon/issues/5431
## Problem
https://github.com/neondatabase/neon/pull/8588 implemented the mechanism
for storage controller
leadership transfers. However, there's no tests that exercise the
behaviour.
## Summary of changes
1. Teach `neon_local` how to handle multiple storage controller
instances. Each storage controller
instance gets its own subdirectory (`storage_controller_1, ...`).
`storage_controller start|stop` subcommands
have also been extended to optionally accept an instance id.
2. Add a storage controller proxy test fixture. It's a basic HTTP server
that forwards requests from pageserver
and test env to the currently configured storage controller.
3. Add a test which exercises storage controller leadership transfer.
4. Finally fix a couple bugs that the test surfaced
## Problem
The control file contains the id of the safekeeper that uploaded it.
Previously, when sending a snapshot of the control file to another sk,
it would eventually be gc-ed by the receiving sk. This is incorrect
because the original sk might still need it later.
## Summary of Changes
When sending a snapshot and the control file contains an uploaded
segment:
* Create a copy of the segment in s3 with the destination sk in the
object name
* Tweak the streamed control file to point to the object create in the
previous step
Note that the snapshot endpoint now has to know the id of the requestor,
so the api has been extended to include the node if of the destination
sk.
Closes https://github.com/neondatabase/neon/issues/8542
After #8655 we've had a few issues (mostly tracked on #8708) with the
graceful shutdown. In order to shutdown more of the processes and catch
more errors, for example, from all pageservers, do an immediate shutdown
for those nodes which fail the initial (possibly graceful) shutdown.
Cc: #6485
A few of the benchmarks have started failing after #8655 where they are
waiting for compactor task. Reads done by image layer creation should
already be cancellation sensitive because vectored get does a check each
time, but try sprinkling additional cancellation points to:
- each partition
- after each vectored read batch
It should give us all possible allowed_errors more consistently.
While getting the workflows to pass on
https://github.com/neondatabase/neon/pull/8632 it was noticed that
allowed_errors are rarely hit (1/4). This made me realize that we always
do an immediate stop by default. Doing a graceful shutdown would had
made the draining more apparent and likely we would not have needed the
#8632 hotfix.
Downside of doing this is that we will see more timeouts if tests are
randomly leaving pause failpoints which fail the shutdown.
The net outcome should however be positive, we could even detect too
slow shutdowns caused by a bug or deadlock.
## Problem
This test was disabled.
## Summary of changes
- Remove the skip marker.
- Explicitly avoid doing compaction & gc during checkpoints (the default
scale doesn't do anything here, but when experimeting with larger scales
it messes things up)
- Set a data size that gives a ~20s runtime on a Hetzner dev machine,
previous one gave very noisy results because it was so small
For reference on a Hetzner AX102:
```
------------------------------ Benchmark results -------------------------------
test_bulk_insert[neon-release-pg16].insert: 25.664 s
test_bulk_insert[neon-release-pg16].pageserver_writes: 5,428 MB
test_bulk_insert[neon-release-pg16].peak_mem: 577 MB
test_bulk_insert[neon-release-pg16].size: 0 MB
test_bulk_insert[neon-release-pg16].data_uploaded: 1,922 MB
test_bulk_insert[neon-release-pg16].num_files_uploaded: 8
test_bulk_insert[neon-release-pg16].wal_written: 1,382 MB
test_bulk_insert[neon-release-pg16].wal_recovery: 25.373 s
test_bulk_insert[neon-release-pg16].compaction: 0.035 s
```
It should take syncrep flush_lsn into account because WAL before it on endpoint
restart is lost, which makes replication miss some data if slot had already been
advanced too far. This commit adds test reproducing the issue and bumps
vendor/postgres to commit with the actual fix.
Noticed this while debugging a test failure in #8673 which only occurs
with real S3 instead of mock S3: if you authenticate to S3 via
`AWS_PROFILE`, then it requires the `HOME` env var to be set so that it
can read inside the `~/.aws` directory.
The scrubber abstraction `StorageScrubber::scrubber_cli` in
`neon_fixtures.py` would otherwise not work. My earlier PR #6556 has
done similar things for the `neon_local` wrapper.
You can try:
```
aws sso login --profile dev
export ENABLE_REAL_S3_REMOTE_STORAGE=y REMOTE_STORAGE_S3_BUCKET=neon-github-ci-tests REMOTE_STORAGE_S3_REGION=eu-central-1 AWS_PROFILE=dev
RUST_BACKTRACE=1 BUILD_TYPE=debug DEFAULT_PG_VERSION=16 ./scripts/pytest -vv --tb=short -k test_scrubber_tenant_snapshot
```
before and after this patch: this patch fixes it.
## Problem
Migrations of tenant shards with cold secondaries are holding up drains
in during production deployments.
## Summary of changes
If a secondary locations is lagging by more than 256MiB (configurable,
but that's the default), then skip cutting it over to the secondary as part of the node drain.
