## Problem
In our experience running the system so far, almost all of the "hang
compute" situations are due to the compute (postgres) pointing at the
wrong pageservers. We currently mainly rely on the promethesus exporter
(PGExporter) running on PG to detect and report any down time, but these
can be unreliable because the read and write probes the PGExporter runs
do not always generate pageserver requests due to caching, even though
the real user might be experiencing down time when touching uncached
pages.
We are also about to start disk-wiping node pool rotation operations in
prod clusters for our pageservers, and it is critical to have a
convenient way to monitor the impact of these node pool rotations so
that we can quickly respond to any issues. These metrics should provide
very clear signals to address this operational need.
## Summary of changes
Added a pair of metrics to detect issues between postgres' PageStream
protocol (e.g. get_page_at_lsn, get_base_backup, etc.) communications
with pageservers:
* On the compute node (compute_ctl), exports a counter metric that is
incremented every time postgres requests a configuration refresh.
Postgres today only requests these configuration refreshes when it
cannot connect to a pageserver or if the pageserver rejects its request
by disconnecting.
* On the pageserver, exports a counter metric that is incremented every
time it receives a PageStream request that cannot be handled because the
tenant is not known or if the request was routed to the wrong shard
(e.g. secondary).
### How I plan to use metrics
I plan to use the metrics added here to create alerts. The alerts can
fire, for example, if these counters have been continuously increasing
for over a certain period of time. During rollouts, misrouted requests
may occasionally happen, but they should soon die down as
reconfigurations make progress. We can start with something like raising
the alert if the counters have been increasing continuously for over 5
minutes.
## How is this tested?
New integration tests in
`test_runner/regress/test_hadron_ps_connectivity_metrics.py`
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
LKB-197, #9516
To make sure the migration path is smooth.
The previous plan is to store new relations in new keyspace and old ones
in old keyspace until it gets dropped. This makes the migration path
hard as we can't validate v2 writes and can't rollback. This patch gives
us a more smooth migration path:
- The first time we enable reldirv2 for a tenant, we copy over
everything in the old keyspace to the new one. This might create a short
spike of latency for the create relation operation, but it's oneoff.
- After that, we have identical v1/v2 keyspace and read/write both of
them. We validate reads every time we list the reldirs.
- If we are in `migrating` mode, use v1 as source of truth and log a
warning for failed v2 operations. If we are in `migrated` mode, use v2
as source of truth and error when writes fail.
- One compatibility test uses dataset from the time where we enabled
reldirv2 (of the original rollout plan), which only has relations
written to the v2 keyspace instead of the v1 keyspace. We had to adjust
it accordingly.
- Add `migrated_at` in index_part to indicate the LSN where we did the
initialize.
TODOs:
- Test if relv1 can be read below the migrated_at LSN.
- Move the initialization process to L0 compaction instead of doing it
on the write path.
- Disable relcache in the relv2 test case so that all code path gets
fully tested.
## Summary of changes
- New behavior of reldirv2 migration flags as described above.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
As part of the reldirv2 rollout: LKB-197.
We will use number of db/rels as a criteria whether to rollout reldirv2
directly on the write path (simplest and easiest way of rollout). If the
number of rel/db is small then it shouldn't take too long time on the
write path.
## Summary of changes
* Compute db/rel count during basebackup.
* Also compute it during logical size computation.
* Collect maximum number of db/rel across all timelines in the feature
flag propeties.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We drive the get page requests that have started processing to
completion. So in the case when the compute received a reconfiguration
request and the old connection has a request procesing on the
pageserver, we are going to issue the warning.
I spot checked a few instances of the warning and in all cases the
compute was already connected to the correct pageserver.
## Summary of Changes
Downgrade to INFO. It would be nice to somehow figure out if the
connection has been terminated in the meantime, but the terminate libpq
message is still in the pipe while we're doing the shard resolution.
Closes LKB-2381
## Problem
Post LKB-198 rollout. We added a new strategy to generate image layers
at the L0-L1 boundary instead of the latest LSN to ensure too many L0
layers do not trigger image layer creation.
## Summary of changes
We already rolled it out to all users so we can remove the feature flag
now.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
NB: effectively a no-op in the neon env since the handling is config
gated
in storcon
## Problem
When a pageserver suffers from a local disk/node failure and restarts,
the storage controller will receive a re-attach call and return all the
tenants the pageserver is suppose to attach, but the pageserver will not
act on any tenants that it doesn't know about locally. As a result, the
pageserver will not rehydrate any tenants from remote storage if it
restarted following a local disk loss, while the storage controller
still thinks that the pageserver have all the tenants attached. This
leaves the system in a bad state, and the symptom is that PG's
pageserver connections will fail with "tenant not found" errors.
## Summary of changes
Made a slight change to the storage controller's `re_attach` API:
* The pageserver will set an additional bit `empty_local_disk` in the
reattach request, indicating whether it has started with an empty disk
or does not know about any tenants.
* Upon receiving the reattach request, if this `empty_local_disk` bit is
set, the storage controller will go ahead and clear all observed
locations referencing the pageserver. The reconciler will then discover
the discrepancy between the intended state and observed state of the
tenant and take care of the situation.
To facilitate rollouts this extra behavior in the `re_attach` API is
guarded by the `handle_ps_local_disk_loss` command line flag of the
storage controller.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Include the ip address (optionally read from an env var) in the
pageserver's registration request.
Note that the ip address is ignored by the storage controller at the
moment, which makes it a no-op
in the neon env.
## Problem
Postgres will often immediately follow a relation existence check with a
relation size query. This incurs two roundtrips, and may prevent
effective caching.
See [Slack
thread](https://databricks.slack.com/archives/C091SDX74SC/p1751951732136139).
Touches #11728.
## Summary of changes
For the gRPC API:
* Add an `allow_missing` parameter to `GetRelSize`, which returns
`missing=true` instead of a `NotFound` error.
* Remove `CheckRelExists`.
There are no changes to libpq behavior.
## Problem
`ShardStripeSize` will be used in the compute spec and internally in the
communicator. It shouldn't require pulling in all of `pageserver_api`.
## Summary of changes
Move `ShardStripeSize` into `utils::shard`, along with other basic shard
types. Also remove the `Default` implementation, to discourage clients
from falling back to a default (it's generally a footgun).
The type is still re-exported from `pageserver_api::shard`, along with
all the other shard types.
## Problem
The gRPC page service does not properly react to shutdown cancellation.
In particular, Tonic considers an open GetPage stream to be an in-flight
request, so it will wait for it to complete before shutting down.
Touches [LKB-191](https://databricks.atlassian.net/browse/LKB-191).
## Summary of changes
Properly react to the server's cancellation token and take out gate
guards in gRPC request handlers.
Also document cancellation handling. In particular, that Tonic will drop
futures when clients go away (e.g. on timeout or shutdown), so the read
path must be cancellation-safe. It is believed to be (modulo possible
logging noise), but this will be verified later.
## Problem
part of https://github.com/neondatabase/neon/issues/11318 ; it is not
entirely safe to run gc-compaction over the metadata key range due to
tombstones and implications of image layers (missing key in image layer
== key not exist). The auto gc-compaction trigger already skips metadata
key ranges (see `schedule_auto_compaction` call in
`trigger_auto_compaction`). In this patch we enforce it directly in
gc_compact_inner so that compactions triggered via HTTP API will also be
subject to this restriction.
## Summary of changes
Ensure gc-compaction only runs on rel key ranges.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The warning message was seen during deployment, but it's actually OK.
## Summary of changes
- Treat `"No broker updates received for a while ..."` as an info
message.
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
We don't want to depend on postgres_ffi in an API crate. If there is no
such dependency, we can compile stuff like `storcon_cli` without needing
a full working postgres build. Fixes regression of #12548 (before we
could compile it).
- Remove a few obsolete "allowed error messages" from tests. The
pageserver doesn't emit those messages anymore.
- Remove misplaced and outdated docstring comment from
`test_tenants.py`. A docstring is supposed to be the first thing in a
function, but we had added some code before it. And it was outdated, as
we haven't supported running without safekeepers for a long time.
- Fix misc typos in comments
- Remove obsolete comment about backwards compatibility with safekeepers
without `TIMELINE_STATUS` API. All safekeepers have it by now.
Include records and image in the debug get page handler.
This endpoint does not update the metrics and does not support tracing.
Note that this now returns individual bytes which need to be encoded
properly for debugging.
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
# TLDR
This PR is a no-op.
## Problem
When a SK loses a disk, it must recover all WALs from the very
beginning. This may take days/weeks to catch up to the latest WALs for
all timelines it owns.
## Summary of changes
When SK starts up,
if it finds that it has 0 timelines,
- it will ask SC for the timeline it owns.
- Then, pulls the timeline from its peer safekeepers to restore the WAL
redundancy right away.
After pulling timeline is complete, it will become active and accepts
new WALs.
The current impl is a prototype. We can optimize the impl further, e.g.,
parallel pull timelines.
---------
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
## Problem
We don't log the timeline ID when rolling ephemeral layers during
housekeeping.
Resolves [LKB-179](https://databricks.atlassian.net/browse/LKB-179)
## Summary of changes
Add a span with timeline ID when calling `maybe_freeze_ephemeral_layer`
from the housekeeping loop.
We don't instrument the function itself, since future callers may not
have a span including the tenant_id already, but we don't want to
duplicate the tenant_id for these spans.
# TLDR
Problem-I is a bug fix. The rest are no-ops.
## Problem I
Page server checks image layer creation based on the elapsed time but
this check depends on the current logical size, which is only computed
on shard 0. Thus, for non-0 shards, the check will be ineffective and
image creation will never be done for idle tenants.
## Summary of changes I
This PR fixes the problem by simply removing the dependency on current
logical size.
## Summary of changes II
This PR adds a timeout when calling page server to split shard to make
sure SC does not wait for the API call forever. Currently the PR doesn't
adds any retry logic because it's not clear whether page server shard
split can be safely retried if the existing operation is still ongoing
or left the storage in a bad state. Thus it's better to abort the whole
operation and restart.
## Problem III
`test_remote_failures` requires PS to be compiled in the testing mode.
For PS in dev/staging, they are compiled without this mode.
## Summary of changes III
Remove the restriction and also increase the number of total failures
allowed.
## Summary of changes IV
remove test on PS getpage http route.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Yecheng Yang <carlton.yang@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
## Problem
close LKB-162
close https://github.com/neondatabase/cloud/issues/30665, related to
https://github.com/neondatabase/cloud/issues/29434
We see a lot of errors like:
```
2025-05-22T23:06:14.928959Z ERROR compaction_loop{tenant_id=? shard_id=0304}:run:gc_compact_timeline{timeline_id=?}: error applying 4 WAL records 35/DC0DF0B8..3B/E43188C0 (8119 bytes) to key 000000067F0000400500006027000000B9D0, from base image with LSN 0/0 to reconstruct page image at LSN 61/150B9B20 n_attempts=0: apply_wal_records
Caused by:
0: read walredo stdout
1: early eof
```
which is an acceptable form of error and we should downgrade it to
warning.
## Summary of changes
walredo error during gc-compaction is expected when the data below the
gc horizon does not contain a full key history. This is possible in some
rare cases of gc that is only able to remove data in the middle of the
history but not all earlier history when a full keyspace gets deleted.
Signed-off-by: Alex Chi Z <chi@neon.tech>
This is a no-op for the neon deployment
* Introduce the concept image consistent lsn: of the largest LSN below
which all pages have been redone successfully
* Use the image consistent LSN for forced image layer creations
* Optionally expose the image consistent LSN via the timeline describe
HTTP endpoint
* Add a sharded timeline describe endpoint to storcon
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
With gRPC `GetPageRequest` batches, we'll have non-trivial
fragmentation/reassembly logic in several places of the stack
(concurrent reads, shard splits, LFC hits, etc). If we included the
block numbers with the pages in `GetPageResponse` we could have better
verification and observability that the final responses are correct.
Touches #11735.
Requires #12480.
## Summary of changes
Add a `Page` struct with`block_number` for `GetPageResponse`, along with
the `RelTag` for completeness, and verify them in the rich gRPC client.
## Problem
`GetPageRequest::request_id` is supposed to be a unique ID for a
request. It's not, because we may retry the request using the same ID.
This causes assertion failures and confusion.
Touches #11735.
Requires #12480.
## Summary of changes
Extend the request ID with a retry attempt, and handle it in the gRPC
client and server.
# TLDR
All changes are no-op except some metrics.
## Summary of changes I
### Pageserver
Added a new global counter metric
`pageserver_pagestream_handler_results_total` that categorizes
pagestream request results according to their outcomes:
1. Success
2. Internal errors
3. Other errors
Internal errors include:
1. Page reconstruction error: This probably indicates a pageserver
bug/corruption
2. LSN timeout error: Could indicate overload or bugs with PS's ability
to reach other components
3. Misrouted request error: Indicates bugs in the Storage Controller/HCC
Other errors include transient errors that are expected during normal
operation or errors indicating bugs with other parts of the system
(e.g., malformed requests, errors due to cancelled operations during PS
shutdown, etc.)
## Summary of changes II
This PR adds a pageserver endpoint and its counterpart in storage
controller to list visible size of all tenant shards. This will be a
prerequisite of the tenant rebalance command.
## Problem III
We need a way to download WAL
segments/layerfiles from S3 and replay WAL records. We cannot access
production S3 from our laptops directly, and we also can't transfer any
user data out of production systems for GDPR compliance, so we need
solutions.
## Summary of changes III
This PR adds a couple of tools to support the debugging
workflow in production:
1. A new `pagectl download-remote-object` command that can be used to
download remote storage objects assuming the correct access is set up.
## Summary of changes IV
This PR adds a command to list all visible delta and image layers from
index_part. This is useful to debug compaction issues as index_part
often contain a lot of covered layers due to PITR.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
## Problem
Safekeeper and pageserver metrics collection might time out. We've seen
this in both hadron and neon.
## Summary of changes
This PR moves metrics collection in PS/SK to the background so that we
will always get some metrics, despite there may be some delays. Will
leave it to the future work to reduce metrics collection time.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
This PR introduces a `image_creation_timeout` to page servers so that we
can force the image creation after a certain period. This is set to 1
day on dev/staging for now, and will rollout to production 1/2 weeks
later.
Majority of the PR are boilerplate code to add the new knob. Specific
changes of the PR are:
1. During L0 compaction, check if we should force a compaction if
min(LSN) of all delta layers < force_image_creation LSN.
2. During image creation, check if we should force a compaction if the
image's LSN < force_image_creation LSN and there are newer deltas with
overlapping key ranges.
3. Also tweaked the check image creation interval to make sure we honor
image_creation_timeout.
Vlad's note: This should be a no-op. I added an extra PS config for the
large timeline
threshold to enable this.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
There are a couple of places that call `CompactionError::is_cancel` but
don't check the `::Other` variant via downcasting for root cause being
cancellation.
The only place that does it is `log_compaction_error`.
It's sad we have to do it, but, until we get around cleaning up all the
culprits,
a step forward is to unify the behavior so that all places that inspect
a
`CompactionError` for cancellation reason follow the same behavior.
Thus, this PR ...
- moves the downcasting checks against the `::Other` variant from
`log_compaction_error` into `is_cancel()` and
- enforces via type system that `.is_cancel()` is used to check whether
a CompactionError is due to cancellation (matching on the
`CompactionError::ShuttingDown` will cause a compile-time error).
I don't think there's a _serious_ case right now where matching instead
of using `is_cancel` causes problems.
The worst case I could find is the circuit breaker and
`compaction_failed`,
which don't really matter if we're shutting down the timeline anyway.
But it's unaesthetic and might cause log/alert noise down the line,
so, this PR fixes that at least.
Refs
- https://databricks.atlassian.net/browse/LKB-182
- slack conversation about this PR:
https://databricks.slack.com/archives/C09254R641L/p1751284317955159
Change the unreliable storage wrapper to fail by probability when there
are more failure attempts left.
Co-authored-by: Yecheng Yang <carlton.yang@databricks.com>
## Problem
Follow up of #12400
## Summary of changes
We didn't set remote_size_mb to Some when initialized so it never gets
computed :(
Also added a new API to force refresh the properties.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
For the communicator, we need a rich Pageserver gRPC client.
Touches #11735.
Requires #12434.
## Summary of changes
This patch adds an initial rich Pageserver gRPC client. It supports:
* Sharded tenants across multiple Pageservers.
* Pooling of connections, clients, and streams for efficient resource
use.
* Concurrent use by many callers.
* Internal handling of GetPage bidirectional streams, with pipelining
and error handling.
* Automatic retries.
* Observability.
The client is still under development. In particular, it needs GetPage
batch splitting, shard map updates, and performance optimization. This
will be addressed in follow-up PRs.
The only differentiated handling of it is for `is_critical`, which in
turn is a `matches!()` on several variants of the `enum
CollectKeyspaceError`
which is the value contained insided
`CompactionError::CollectKeyspaceError`.
This PR introduces a new error for `repartition()`, allowing its
immediate
callers to inspect it like `is_critical` did.
A drive-by fix is more precise classification of WaitLsnError::BadState
when mapping to `tonic::Status`.
refs
- https://databricks.atlassian.net/browse/LKB-182
## Problem
close LKB-209
## Summary of changes
- We should not allow lease creation below the applied gc cutoff.
- Also removed the condition for `AttachedSingle`. We should always
check the lease against the gc cutoff in all attach modes.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We lost capability to explicitly disable the global eviction task (for
testing).
## Summary of changes
Add an `enabled` flag to `DiskUsageEvictionTaskConfig` to indicate
whether we should run the eviction job or not.
# TLDR
All changes are no-op except
1. publishing additional metrics.
2. problem VI
## Problem I
It has come to my attention that the Neon Storage Controller doesn't
correctly update its "observed" state of tenants previously associated
with PSs that has come back up after a local data loss. It would still
think that the old tenants are still attached to page servers and won't
ask more questions. The pageserver has enough information from the
reattach request/response to tell that something is wrong, but it
doesn't do anything about it either. We need to detect this situation in
production while I work on a fix.
(I think there is just some misunderstanding about how Neon manages
their pageserver deployments which got me confused about all the
invariants.)
## Summary of changes I
Added a `pageserver_local_data_loss_suspected` gauge metric that will be
set to 1 if we detect a problematic situation from the reattch response.
The problematic situation is when the PS doesn't have any local tenants
but received a reattach response containing tenants.
We can set up an alert using this metric. The alert should be raised
whenever this metric reports non-zero number.
Also added a HTTP PUT
`http://pageserver/hadron-internal/reset_alert_gauges` API on the
pageserver that can be used to reset the gauge and the alert once we
manually rectify the situation (by restarting the HCC).
## Problem II
Azure upload is 3x slower than AWS. -> 3x slower ingestion.
The reason for the slower upload is that Azure upload in page server is
much slower => higher flush latency => higher disk consistent LSN =>
higher back pressure.
## Summary of changes II
Use Azure put_block API to uploads a 1 GB layer file in 8 blocks in
parallel.
I set the put_block block size to be 128 MB by default in azure config.
To minimize neon changes, upload function passes the layer file path to
the azure upload code through the storage metadata. This allows the
azure put block to use FileChunkStreamRead to stream read from one
partition in the file instead of loading all file data in memory and
split it into 8 128 MB chunks.
## How is this tested? II
1. rust test_real_azure tests the put_block change.
3. I deployed the change in azure dev and saw flush latency reduces from
~30 seconds to 10 seconds.
4. I also did a bunch of stress test using sqlsmith and 100 GB TPCDS
runs.
## Problem III
Currently Neon limits the compaction tasks as 3/4 * CPU cores. This
limits the overall compaction throughput and it can easily cause
head-of-the-line blocking problems when a few large tenants are
compacting.
## Summary of changes III
This PR increases the limit of compaction tasks as `BG_TASKS_PER_THREAD`
(default 4) * CPU cores. Note that `CONCURRENT_BACKGROUND_TASKS` also
limits some other tasks `logical_size_calculation` and `layer eviction`
. But compaction should be the most frequent and time-consuming task.
## Summary of changes IV
This PR adds the following PageServer metrics:
1. `pageserver_disk_usage_based_eviction_evicted_bytes_total`: captures
the total amount of bytes evicted. It's more straightforward to see the
bytes directly instead of layers.
2. `pageserver_active_storage_operations_count`: captures the active
storage operation, e.g., flush, L0 compaction, image creation etc. It's
useful to visualize these active operations to get a better idea of what
PageServers are spending cycles on in the background.
## Summary of changes V
When investigating data corruptions, it's useful to search the base
image and all WAL records of a page up to an LSN, i.e., a breakdown of
GetPage@LSN request. This PR implements this functionality with two
tools:
1. Extended `pagectl` with a new command to search the layer files for a
given key up to a given LSN from the `index_part.json` file. The output
can be used to download the files from S3 and then search the file
contents using the second tool.
Example usage:
```
cargo run --bin pagectl index-part search --tenant-id 09b99ea3239bbb3b2d883a59f087659d --timeline-id 7bedf4a6995baff7c0421ff9aebbcdab --path ~/Downloads/corruption/index_part.json-0000000c-formatted --key 000000067F000080140000802100000D61BD --lsn 70C/BF3D61D8
```
Example output:
```
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F0000801400008028000002FEFF__000007089F0B5381-0000070C7679EEB9-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000000000000000000000000000000000-000000067F0000801400008028000002F3F1__000006DD95B6F609-000006E2BA14C369-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F000080140000802100001B0973__000006D33429F539-000006DD95B6F609-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000164D81__000006C6343B2D31-000006D33429F539-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F0000801400008021000017687B__000006BA344FA7F1-000006C6343B2D31-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000165BAB__000006AD34613D19-000006BA344FA7F1-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000137A39__0000069F34773461-000006AD34613D19-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F000080140000802100000D4000-000000067F000080140000802100000F0000__0000069F34773460-0000000b
```
2. Added a unit test to search the layer file contents. It's not
implemented part of `pagectl` because it depends on some test harness
code, which can only be used by unit tests.
Example usage:
```
cargo test --package pageserver --lib -- tenant::debug::test_search_key --exact --nocapture -- --tenant-id 09b99ea3239bbb3b2d883a59f087659d --timeline-id 7bedf4a6995baff7c0421ff9aebbcdab --data-dir /Users/chen.luo/Downloads/corruption --key 000000067F000080140000802100000D61BD --lsn 70C/BF3D61D8
```
Example output:
```
# omitted image for brievity
delta: 69F/769D8180: will_init: false, "OgAAALGkuwXwYp12nwYAAECGAAASIqLHAAAAAH8GAAAUgAAAIYAAAL1hDQD/DLGkuwUDAAAAEAAWAA=="
delta: 69F/769CB6D8: will_init: false, "PQAAALGkuwXotZx2nwYAABAJAAAFk7tpACAGAH8GAAAUgAAAIYAAAL1hDQD/CQUAEAASALExuwUBAAAAAA=="
```
## Problem VI
Currently when page service resolves shards from page numbers, it
doesn't fully support the case that the shard could be split in the
middle. This will lead to query failures during the tenant split for
either commit or abort cases (it's mostly for abort).
## Summary of changes VI
This PR adds retry logic in `Cache::get()` to deal with shard resolution
errors more gracefully. Specifically, it'll clear the cache and retry,
instead of failing the query immediately. It also reduces the internal
timeout to make retries faster.
The PR also fixes a very obvious bug in
`TenantManager::resolve_attached_shard` where the code tries to cache
the computed the shard number, but forgot to recompute when the shard
count is different.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Vlad Lazar <vlad.lazar@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
## Problem
Some feature flags are used heavily on the critical path and we want the
"get feature flag" operation as cheap as possible.
## Summary of changes
Add a `test_remote_size_flag` as an example of such flags. In the
future, we can use macro to generate all those fields. The flag is
updated in the housekeeping loop. The retrieval of the flag is simply
reading an atomic flag.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The goal of this code was to test out if resetting the broker
subscription helps alleviate the issues we've been seeing in staging.
Looks like it did the trick. However, the original version was too
eager.
## Summary of Changes
Only reset the stream when:
* we are waiting for WAL
* there's no connection candidates lined up
* we're not already connected to a safekeeper
The only call stack that can emit the `::AlreadyRunning` variant is
```
-> iteration_inner
-> iteration
-> compaction_iteration
-> compaction_loop
-> start_background_loops
```
And on that call stack, the only differentiated handling of it is its
invocations of
`log_compaction_error -> CompactionError::is_cancel()`, which returns
`true` for
`::AlreadyRunning`.
I think the condition of `AlreadyRunning` is severe; it really shouldn't
happen.
So, this PR starts treating it as something that is to be logged at
`ERROR` / `WARN`
level, depending on the `degrate_to_warning` argument to
`log_compaction_error`.
refs
- https://databricks.atlassian.net/browse/LKB-182
Looks can be deceiving: the match blocks in
`maybe_trip_compaction_breaker`
and at the end of `compact_with_options` seem like differentiated error
handling, but in reality, these branches are unreachable at runtime
because the only source of `CompactionError::Offload` within the
compaction code is at the end of `Tenant::compaction_iteration`.
We can simply map offload cancellation to CompactionError::Cancelled and
all other offload errors to ::Other, since there's no differentiated
handling for them in the compaction code.
Also, the OffloadError::RemoteStorage variant has no differentiated
handling, but was wrapping the remote storage anyhow::Error in a
`anyhow(thiserror(anyhow))` sandwich. This PR removes that variant,
mapping all RemoteStorage errors to `OffloadError::Other`.
Thereby, the sandwich is gone and we will get a proper anyhow backtrace
to the remote storage error location if when we debug-print the
OffloadError (or the CompactionError if we map it to that).
refs
- https://databricks.atlassian.net/browse/LKB-182
- the observation that there's no need for differentiated handling of
CompactionError::Offload was made in
https://databricks.slack.com/archives/C09254R641L/p1751286453930269?thread_ts=1751284317.955159&cid=C09254R641L
The introduction of the default lease deadline feature 9 months ago made
it so
that after PS restart, `.timeline_gc()` calls in Python tests are no-ops
for 10 minute after pageserver startup: the `gc_iteration()` bails with
`Skipping GC because lsn lease deadline is not reached`.
I did some impact analysis in the following PR. About 30 Python tests
are affected:
- https://github.com/neondatabase/neon/pull/12411
Rust tests that don't explicitly enable periodic GC or invoke GC
manually
are unaffected because we disable periodic GC by default in
the `TenantHarness`'s tenant config.
Two tests explicitly did `start_paused=true` + `tokio::time::advance()`,
but it would add cognitive and code bloat to each existing and future
test case that uses TenantHarness if we took that route.
So, this PR sets the default lease deadline feature in both Python
and Rust tests to zero by default. Tests that test the feature were
thus identified by failing the test:
- Python test `test_readonly_node_gc` + `test_lsn_lease_size`
- Rust test `test_lsn_lease`.
To accomplish the above, I changed the code that computes the initial
lease
deadline to respect the pageserver.toml's default tenant config, which
it didn't before (and I would consider a bug). The Python test harness
and the Rust TenantHarness test harness then simply set the default
tenant
config field to zero.
Drive-by:
- `test_lsn_lease_size` was writing a lot of data unnecessarily; reduce
the amount and speed up the test
refs
- PR that introduced default lease deadline:
https://github.com/neondatabase/neon/pull/9055/files
- fixes https://databricks.atlassian.net/browse/LKB-92
---------
Co-authored-by: Christian Schwarz <Christian Schwarz>
## Problem
We don't log gRPC request errors on the server.
Touches #11728.
## Summary of changes
Automatically log non-OK gRPC response statuses in the observability
middleware, and add corresponding logging for the `get_pages` stream.
Also adds the peer address and gRPC method to the gRPC tracing span.
Example output:
```
2025-07-02T20:18:16.813718Z WARN grpc:pageservice{peer=127.0.0.1:56698 method=CheckRelExists tenant_id=c7b45faa1924b1958f05c5fdee8b0d04 timeline_id=4a36ee64fd2f97781b9dcc2c3cddd51b shard_id=0000}: request failed with NotFound: Tenant c7b45faa1924b1958f05c5fdee8b0d04 not found
```
Mostly a revert of https://github.com/neondatabase/neon/pull/11851 and
https://github.com/neondatabase/neon/pull/12330 .
Christian suggested reverting his PR to fix the issue
https://github.com/neondatabase/neon/issues/12369 .
Alternatives considered:
1. I have originally wanted to introduce cancellation tokens to
`RequestContext`, but in the end I gave up on them because I didn't find
a select-free way of preventing
`test_layer_download_cancelled_by_config_location` from hanging.
Namely if I put a select around the `get_or_maybe_download` invocation
in `get_values_reconstruct_data`, it wouldn't hang, but if I put it
around the `download_init_and_wait` invocation in
`get_or_maybe_download`, the test would still hang. Not sure why, even
though I made the attached child function of the `RequestContext` create
a child token.
2. Introduction of a `download_cancel` cancellation token as a child of
a timeline token, putting it into `RemoteTimelineClient` together with
the main token, and then putting it into the whole
`RemoteTimelineClient` read path.
3. Greater refactorings, like to make cancellation tokens follow a DAG
structure so you can have tokens cancelled either by say timeline
shutting down or a request ending. It doesn't just represent an effort
that we don't have the engineering budget for, it also causes
interesting questions like what to do about batching (do you cancel the
entire request if only some requests get cancelled?).
We might see a reemergence of
https://github.com/neondatabase/neon/issues/11762, but given that we
have https://github.com/neondatabase/neon/pull/11853 and
https://github.com/neondatabase/neon/pull/12376 now, it is possible that
it will not come back. Looking at some code, it might actually fix the
locations where the error pops up. Let's see.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
I suspect that the pageservers get stuck on receiving broker updates.
## Summary of changes
This is a an opportunistic (staging only) patch that resets the
susbscription
stream if it's been idle for a while. This won't go to prod in this
form.
I'll revert or update it before Friday.
## Problem
Better investigate memory usage during backpressure
## Summary of changes
Print open layer size if backpressure is activated
Signed-off-by: Alex Chi Z <chi@neon.tech>
