## Problem
We run regression tests on `release` & `debug` builds for each of the
three supported Postgres versions (6 in total).
With upcoming ARM support and Postgres 17, the number of jobs will jump
to 16, which is a lot.
See the internal discussion here:
https://neondb.slack.com/archives/C033A2WE6BZ/p1722365908404329
## Summary of changes
- Run `regress-tests` job in debug builds only with the latest Postgres
version
- Do not do `debug` builds on release branches
part of https://github.com/neondatabase/neon/issues/8184
# Problem
We want to bypass PS PageCache for all data block reads, but
`compact_level0_phase1` currently uses `ValueRef::load` to load the WAL
records from delta layers.
Internally, that maps to `FileBlockReader:read_blk` which hits the
PageCache
[here](e78341e1c2/pageserver/src/tenant/block_io.rs (L229-L236)).
# Solution
This PR adds a mode for `compact_level0_phase1` that uses the
`MergeIterator` for reading the `Value`s from the delta layer files.
`MergeIterator` is a streaming k-merge that uses vectored blob_io under
the hood, which bypasses the PS PageCache for data blocks.
Other notable changes:
* change the `DiskBtreeReader::into_stream` to buffer the node, instead
of holding a `PageCache` `PageReadGuard`.
* Without this, we run out of page cache slots in
`test_pageserver_compaction_smoke`.
* Generally, `PageReadGuard`s aren't supposed to be held across await
points, so, this is a general bugfix.
# Testing / Validation / Performance
`MergeIterator` has not yet been used in production; it's being
developed as part of
* https://github.com/neondatabase/neon/issues/8002
Therefore, this PR adds a validation mode that compares the existing
approach's value iterator with the new approach's stream output, item by
item.
If they're not identical, we log a warning / fail the unit/regression
test.
To avoid flooding the logs, we apply a global rate limit of once per 10
seconds.
In any case, we use the existing approach's value.
Expected performance impact that will be monitored in staging / nightly
benchmarks / eventually pre-prod:
* with validation:
* increased CPU usage
* ~doubled VirtualFile read bytes/second metric
* no change in disk IO usage because the kernel page cache will likely
have the pages buffered on the second read
* without validation:
* slightly higher DRAM usage because each iterator participating in the
k-merge has a dedicated buffer (as opposed to before, where compactions
would rely on the PS PageCaceh as a shared evicting buffer)
* less disk IO if previously there were repeat PageCache misses (likely
case on a busy production Pageserver)
* lower CPU usage: PageCache out of the picture, fewer syscalls are made
(vectored blob io batches reads)
# Rollout
The new code is used with validation mode enabled-by-default.
This gets us validation everywhere by default, specifically in
- Rust unit tests
- Python tests
- Nightly pagebench (shouldn't really matter)
- Staging
Before the next release, I'll merge the following aws.git PR that
configures prod to continue using the existing behavior:
* https://github.com/neondatabase/aws/pull/1663
# Interactions With Other Features
This work & rollout should complete before Direct IO is enabled because
Direct IO would double the IOPS & latency for each compaction read
(#8240).
# Future Work
The streaming k-merge's memory usage is proportional to the amount of
memory per participating layer.
But `compact_level0_phase1` still loads all keys into memory for
`all_keys_iter`.
Thus, it continues to have active memory usage proportional to the
number of keys involved in the compaction.
Future work should replace `all_keys_iter` with a streaming keys
iterator.
This PR has a draft in its first commit, which I later reverted because
it's not necessary to achieve the goal of this PR / issue #8184.
Change Azure storage configuration to point to new variables/secrets. They have
the `_NEW` suffix in order not to disrupt any tests while we complete the
switch.
Part of #8128, followup to #8480. closes#8421.
Enable scrubber to optionally post metadata scan health results to
storage controller.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Part of #8128, followed by #8502.
## Problem
Currently we lack mechanism to alert unhealthy `scan_metadata` status if
we start running this scrubber command as part of a cronjob. With the
storage controller client introduced to storage scrubber in #8196, it is
viable to set up alert by storing health status in the storage
controller database.
We intentionally do not store the full output to the database as the
json blobs potentially makes the table really huge. Instead, only a
health status and a timestamp recording the last time metadata health
status is posted on a tenant shard.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
This tests the ability to push into ACR using OIDC. Proved it worked by running slightly modified YAML.
In `promote-images` we push the following images `neon compute-tools {vm-,}compute-node-{v14,v15,v16}` into `neoneastus2`.
https://github.com/neondatabase/cloud/issues/14640
## Problem
We don't allow regular end-users to use `k8s-pod` provisioner,
but we still use it in nightly benchmarks
## Summary of changes
- Remove `provisioner` input from `neon-create-project` action, use
`k8s-neonvm` as a default provioner
- Change `neon-` platform prefix to `neonvm-`
- Remove `neon-captest-freetier` and `neon-captest-new` as we already
have their `neonvm` counterparts
Add two new functions `stream_objects_with_retries` and
`stream_tenants_generic` and use them in the `find-large-objects`
subcommand, migrating it to `remote_storage`.
Also adds the `size` field to the `ListingObject` struct.
Part of #7547
If compression is enabled, we currently try compressing each image
larger than a specific size and if the compressed version is smaller, we
write that one, otherwise we use the uncompressed image. However, this
might sometimes be a wasteful process, if there is a substantial amount
of images that don't compress well.
The compression metrics added in #8420
`pageserver_compression_image_in_bytes_total` and
`pageserver_compression_image_out_bytes_total` are well designed for
answering the question how space efficient the total compression process
is end-to-end, which helps one to decide whether to enable it or not.
To answer the question of how much waste there is in terms of trial
compression, so CPU time, we add two metrics:
* one about the images that have been trial-compressed (considered), and
* one about the images where the compressed image has actually been
written (chosen).
There is different ways of weighting them, like for example one could
look at the count, or the compressed data. But the main contributor to
compression CPU usage is amount of data processed, so we weight the
images by their *uncompressed* size. In other words, the two metrics
are:
* `pageserver_compression_image_in_bytes_considered`
* `pageserver_compression_image_in_bytes_chosen`
Part of #5431
## Problem
Old storage buckets can contain a lot of tenants that aren't known to
the control plane at all, because they belonged to test jobs that get
their control plane state cleaned up shortly after running.
In general, it's somewhat unsafe to purge these, as it's hard to
distinguish "control plane doesn't know about this, so it's garbage"
from "control plane said it didn't know about this, which is a bug in
the scrubber, control plane, or API URL configured".
However, the most common case is that we see only a small husk of a
tenant in S3 from a specific old behavior of the software, for example:
- We had a bug where heatmaps weren't deleted on tenant delete
- When WAL DR was first deployed, we didn't delete initdb.tar.zst on
tenant deletion
## Summary of changes
- Add a KnownBug variant for the garbage reason
- Include such cases in the "safe" deletion mode (`--mode=deleted`)
- Add code that inspects tenants missing in control plane to identify
cases of known bugs (this is kind of slow, but should go away once we've
cleaned all these up)
- Add an additional `-min-age` safety check similar to physical GC,
where even if everything indicates objects aren't needed, we won't
delete something that has been modified too recently.
---------
Co-authored-by: Yuchen Liang <70461588+yliang412@users.noreply.github.com>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
The secondary download HTTP API is meant to return 200 if the download
is complete, and 202 if it is still in progress. In #8198 the download
implementation was changed to drop out with success early if it
over-runs a time budget, which resulted in 200 responses for incomplete
downloads.
This breaks storcon_cli's "tenant-warmup" command, which uses the OK
status to indicate download complete.
## Summary of changes
- Only return 200 if we get an Ok() _and_ the progress stats indicate
the download is complete.
## Problem
We need to test logical replication with 3rd-party tools regularly.
## Summary of changes
Added a test using ClickHouse as a client
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Uses the Stream based `list_streaming` function added by #8457 in tenant
deletion, as suggested in https://github.com/neondatabase/neon/pull/7932#issuecomment-2150480180 .
We don't have to worry about retries, as the function is wrapped inside
an outer retry block. If there is a retryable error either during the
listing or during deletion, we just do a fresh start.
Also adds `+ Send` bounds as they are required by the
`delete_tenant_remote` function.
## Problem
After https://github.com/neondatabase/neon/pull/7990 `regress_test` job
started to fail with an error:
```
...
File "/__w/neon/neon/test_runner/fixtures/benchmark_fixture.py", line 485, in pytest_terminal_summary
terminalreporter.write(f"{test_report.head_line}.{recorded_property['name']}: ")
TypeError: 'bool' object is not subscriptable
```
https://github.com/neondatabase/neon/actions/runs/10125750938/job/28002582582
It happens because the current implementation doesn't expect pytest's
`user_properties` can be used for anything else but benchmarks (and
https://github.com/neondatabase/neon/pull/7990 started to use it for
tracking `preserve_database_files` parameter)
## Summary of changes
- Make NeonBenchmarker use only records with`neon_benchmarker_` prefix
## Problem
There's a `NeonEnvBuilder#preserve_database_files` parameter that allows
you to keep database files for debugging purposes (by default, files get
cleaned up), but there's no way to get these files from a CI run.
This PR adds handling of `NeonEnvBuilder#preserve_database_files` and
adds the compressed test output directory to Allure reports (for tests
with this parameter enabled).
Ref https://github.com/neondatabase/neon/issues/6967
## Summary of changes
- Compress and add the whole test output directory to Allure reports
- Currently works only with `neon_env_builder` fixture
- Remove `preserve_database_files = True` from sharding tests as
unneeded
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Persists whether a timeline is archived or not in `index_part.json`. We
only return success if the upload has actually worked successfully.
Also introduces a new `index_part.json` version number.
Fixes#8459
Part of #8088
close https://github.com/neondatabase/neon/issues/8435
## Summary of changes
If L0 compaction did not include all L0 layers, skip image generation.
There are multiple possible solutions to the original issue, i.e., an
alternative is to wrap the partial L0 compaction in a loop until it
compacts all L0 layers. However, considering that we should weight all
tenants equally, the current solution can ensure everyone gets a chance
to run compaction, and those who write too much won't get a chance to
create image layers. This creates a natural backpressure feedback that
they get a slower read due to no image layers are created, slowing down
their writes, and eventually compaction could keep up with their writes
+ generate image layers.
Consider deployment, we should add an alert on "skipping image layer
generation", so that we won't run into the case that image layers are
not generated => incidents again.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Problem
-------
wait_lsn timeouts result in a user-facing errors like
```
$ /tmp/neon/pg_install/v16/bin/pgbench -s3424 -i -I dtGvp user=neondb_owner dbname=neondb host=ep-tiny-wave-w23owa37.eastus2.azure.neon.build sslmode=require options='-cstatement_timeout=0 '
dropping old tables...
NOTICE: table "pgbench_accounts" does not exist, skipping
NOTICE: table "pgbench_branches" does not exist, skipping
NOTICE: table "pgbench_history" does not exist, skipping
NOTICE: table "pgbench_tellers" does not exist, skipping
creating tables...
generating data (server-side)...
vacuuming...
pgbench: error: query failed: ERROR: [NEON_SMGR] [shard 0] could not read block 214338 in rel 1663/16389/16839.0 from page server at lsn C/E1C12828
DETAIL: page server returned error: LSN timeout: Timed out while waiting for WAL record at LSN C/E1418528 to arrive, last_record_lsn 6/999D9CA8 disk consistent LSN=6/999D9CA8, WalReceiver status: (update 2024-07-25 08:30:07): connecting to node 25, safekeeper candidates (id|update_time|commit_lsn): [(21|08:30:16|C/E1C129E0), (23|08:30:16|C/E1C129E0), (25|08:30:17|C/E1C129E0)]
CONTEXT: while scanning block 214338 of relation "public.pgbench_accounts"
pgbench: detail: Query was: vacuum analyze pgbench_accounts
```
Solution
--------
Its better to be slow than to fail the queries.
If the app has a deadline, it can use `statement_timeout`.
In the long term, we want to eliminate wait_lsn timeout.
In the short term (this PR), we bump the wait_lsn timeout to
a larger value to reduce the frequency at which these wait_lsn timeouts
occur.
We will observe SLOs and specifically
`pageserver_wait_lsn_seconds_bucket`
before we eliminate the timeout completely.
## Problem
We are missing the step-down primitive required to implement rolling
restarts of the storage controller.
## Summary of changes
Add `/control/v1/step_down` endpoint which puts the storage controller
into a state where it rejects
all API requests apart from `/control/v1/step_down`, `/status` and
`/metrics`. When receiving the request,
storage controller cancels all pending reconciles and waits for them to
exit gracefully. The response contains
a snapshot of the in-memory observed state.
Related:
* https://github.com/neondatabase/cloud/issues/14701
* https://github.com/neondatabase/neon/issues/7797
* https://github.com/neondatabase/neon/pull/8310
## Problem
Vectored get is already enabled in all prod regions without validation.
The pageserver defaults
are out of sync however.
## Summary of changes
Update the pageserver defaults to match the prod config. Also means that
when running tests locally,
people don't have to use the env vars to get the prod config.
## Problem
This is an experiment to see if 16x concurrency is actually helping, or
if it's just giving us very noisy results. If the total runtime with a
lower concurrency is similar, then a lower concurrency is preferable to
reduce the impact of resource-hungry tests running concurrently.
## Problem
This test relies on writing image layers before the split. It can fail
to do so durably if the image layers are written ahead of the remote
consistent LSN, so we should have been doing a checkpoint rather than
just a compaction
## Problem
The scrubber would like to check the highest mtime in a tenant's objects
as a safety check during purges. It recently switched to use
GenericRemoteStorage, so we need to expose that in the listing methods.
## Summary of changes
- In Listing.keys, return a ListingObject{} including a last_modified
field, instead of a RemotePath
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
follow up for #8475
## Summary of changes
Using own private docker registry in `cache-from` and `cache-to`
settings in docker build-push actions
There is a race condition between timeline shutdown and the split task.
Timeline shutdown first shuts down the upload queue, and only then fires
the cancellation token. A parallel running timeline split operation
might thus encounter a cancelled upload queue before the cancellation
token is fired, and print a noisy error.
Fix this by mapping `anyhow::Error{ NotInitialized::ShuttingDown }) to
`FlushLayerError::Cancelled` instead of `FlushLayerError::Other(_)`.
Fixes#8496
update pg_jsonschema extension to v 0.3.1
update pg_graphql extension to v1.5.7
update pgx_ulid extension to v0.1.5
update pg_tiktoken extension, patch Cargo.toml to use new pgrx
update pg_jsonschema extension to v 0.3.1
update pg_graphql extension to v1.5.7
update pgx_ulid extension to v0.1.5
update pg_tiktoken extension, patch Cargo.toml to use new pgrx
This pull request (should) fix the failure of test_gc_feedback. See the
explanation in the newly-added test case.
Part of https://github.com/neondatabase/neon/issues/8002
Allow incomplete history for the compaction algorithm.
Signed-off-by: Alex Chi Z <chi@neon.tech>
In general, replace:
* 'lfc_approximate_working_set_size' with
* 'lfc_approximate_working_set_size_windows'
For the "main" metrics that are actually scraped and used internally,
the old one is just marked as deprecated.
For the "autoscaling" metrics, we're not currently using the old one, so
we can get away with just replacing it.
Also, for the user-visible metrics we'll only store & expose a few
different time windows, to avoid making the UI overly busy or bloating
our internal metrics storage.
But for the autoscaling-related scraper, we aren't storing the metrics,
and it's useful to be able to programmatically operate on the trendline
of how WSS increases (or doesn't!) with window size. So there, we can
just output datapoints for each minute.
Part of neondatabase/autoscaling#872
See also https://www.notion.so/neondatabase/cca38138fadd45eaa753d81b859490c6
## Problem
Storcon shutdown did not produce a clean observed state. This is not a
problem at the moment, but we will need to stop all reconciles with
clean observed state for rolling restarts.
I tried to test this by collecting the observed state during shutdown
and comparing it with the in-memory observed
state, but it doesn't work because a lot of tests use the cursed attach
hook to create tenants directly through the ps.
## Summary of Changes
Rework storcon shutdown as follows:
* Reconcilers get a separate cancellation token which is a child token
of the global `Service::cancel`.
* Reconcilers get a separate gate
* Add a mechanism to drain the reconciler result queue before
* Put all of this together into a clean shutdown sequence
Related https://github.com/neondatabase/cloud/issues/14701
## Problem
This test was destabilized by
https://github.com/neondatabase/neon/pull/8431. The threshold is
arbitrary & failures are still quite close to it. At a high level the
test is asserting "eviction was approximately fair to these tenants",
which appears to still be the case when the abs diff between ratios is
slightly higher at ~0.6-0.7.
## Summary of changes
- Change threshold from 0.06 to 0.065. Based on the last ~10 failures
that should be sufficient.
## Problem
Currently, tests may have a scrub during teardown if they ask for it,
but most tests don't request it. To detect "unknown unknowns", let's run
it at the end of every test where possible. This is similar to asserting
that there are no errors in the log at the end of tests.
## Summary of changes
- Remove explicit `enable_scrub_on_exit`
- Always scrub if remote storage is an S3Storage.
## Problem
Re-attach blocks the pageserver http server from starting up. Hence, it
can't reply to heartbeats
until that's done. This makes the storage controller mark the node
off-line (not good). We worked
around this by setting the interval after which nodes are marked offline
to 5 minutes. This isn't a
long term solution.
## Summary of changes
* Introduce a new `NodeAvailability` state: `WarmingUp`. This state
models the following time interval:
* From receiving the re-attach request until the pageserver replies to
the first heartbeat post re-attach
* The heartbeat delta generator becomes aware of this state and uses a
separate longer interval
* Flag `max-warming-up-interval` now models the longer timeout and
`max-offline-interval` the shorter one to
match the names of the states
Closes https://github.com/neondatabase/neon/issues/7552
## Problem
The rds-aurora endpoint connection cannot be reached from GitHub action
runners.
Temporarily remove this DBMS from the pgbench comparison runs.
## Summary of changes
On Saturday we normally run Neon in comparison with AWS RDS-Postgres and
AWS RDS-Aurora.
Remove Aurora until we have a working setup
