## Problem
Commit
3da70abfa5
cause noticeable performance regression (40% in update-with-prefetch in
test_bulk_update):
https://neondb.slack.com/archives/C04BLQ4LW7K/p1742633167580879
## Summary of changes
Remove loop from pageserver_try_receive to make it fetch not more than
one response. There is still loop in `pump_prefetch_state` which can
fetch as many responses as available.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Previously we had different meanings for the bitmask of vector IOps.
That has now been unified to "bit set = final result, no more
scribbling".
Furthermore, the LFC read path scribbled on pages that were already
read; that's probably not a good thing so that's been fixed too. In
passing, the read path of LFC has been updated to read only the
requested pages into the provided buffers, thus reducing the IO size of
vectorized IOs.
## Problem
## Summary of changes
## Problem
Current version of GitHub Workflow Stats action pull docker images from
DockerHub, that could be an issue with the new pull limits on DockerHub
side.
## Summary of changes
Switch to version `v0.2.2`, with docker images hosted on `ghcr.io`
In sqlstate, we have a manual `phf` construction, which is not
explicitly guaranteed to be stable - you're intended to use a build.rs
or the macro to make sure it's constructed correctly each time. This was
inherited from tokio-postgres upstream, which has the same issue
(https://github.com/rust-phf/rust-phf/pull/321#issuecomment-2724521193).
We don't need this encoding of sqlstate, so I've switched it to simply
parse 5 bytes
(https://www.postgresql.org/docs/current/errcodes-appendix.html).
While here, I switched out log for tracing.
## Problem
Macro IS_LOCAL_REL used for DEBUG_COMPARE_LOCAL mode use greater-than
rather than greater-or-equal comparison while first table really is
assigned FirstNormalObjectId.
## Summary of changes
Replace strict greater with greater-or-equal comparison.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
`TYPE_CHECKING` is used inconsistently across Python tests.
## Summary of changes
- Update `ruff`: 0.7.0 -> 0.11.2
- Enable TC (flake8-type-checking):
https://docs.astral.sh/ruff/rules/#flake8-type-checking-tc
- (auto)fix all new issues
## Problem
Previously, L0 flushes would wait for uploads, as a simple form of
backpressure. However, this prevented flush pipelining and upload
parallelism. It has since been disabled by default and replaced by L0
compaction backpressure.
Touches https://github.com/neondatabase/cloud/issues/24664.
## Summary of changes
This patch removes L0 flush upload waits, along with the
`l0_flush_wait_upload`. This can't be merged until the setting has been
removed across the fleet.
## Problem
`github.sha` contains a merge commit of `head` and `base` if we're in a
PR. In release PRs, this makes no sense, because we fast-forward the
`base` branch to contain the changes from `head`.
Even though we correctly use `${{ github.event.pull_request.head.sha ||
github.sha }}` to reference the git commit when building artifacts, we
don't use that when checking out code, because we want to test the merge
of head and base usually. In the case of release PRs, we definitely
always want to test on the head sha though, because we're going to
forward that, and it already has the base sha as a parent, so the merge
would end up with the same tree anyway.
As a side effect, not checking out `${{
github.event.pull_request.head.sha || github.sha }}` also caused
https://github.com/neondatabase/neon/actions/runs/13986389780/job/39173256184#step:6:49
to say `release-tag=release-compute-8187`, while
https://github.com/neondatabase/neon/actions/runs/14084613121/job/39445314780#step:6:48
is talking about `build-tag=release-compute-8186`
## Summary of changes
Run a few things on `github.event.pull_request.head.sha`, if we're in a
release PR.
## Problem
Occasionally getting data from GH cache could be slow, with less than
10MB/s and taking 5+ minutes to download cache:
```
Received 20971520 of 2987085791 (0.7%), 9.9 MBs/sec
Received 50331648 of 2987085791 (1.7%), 15.9 MBs/sec
...
Received 1065353216 of 2987085791 (35.7%), 4.8 MBs/sec
Received 1065353216 of 2987085791 (35.7%), 4.7 MBs/sec
...
```
https://github.com/neondatabase/neon/actions/runs/13956437454/job/39068664599#step:7:17
Resulting in getting cache even longer that build time.
## Summary of changes
Switch to the caches, that are closer to the runners, and they provided
stable throughput about 70-80MB/s
## Problem
Some useful debugging tools are missing from the compute image and
sometimes it's impossible to install them because memory is tightly
packed.
## Summary of changes
Add the following tools: iproute2, lsof, screen, tcpdump.
The other changes come from sorting the packages alphabetically.
```bash
$ docker image inspect ghcr.io/neondatabase/vm-compute-node-v16:7555 | jaq '.[0].Size'
1389759645
$ docker image inspect ghcr.io/neondatabase/vm-compute-node-v16:14083125313 | jaq '.[0].Size'
1396051101
$ echo $((1396051101 - 1389759645))
6291456
```
To help with narrowing down
https://github.com/neondatabase/cloud/issues/26362, we make the case
more noisy where we are wait for the shutdown of a specific task (in the
case of that issue, the `gc_loop`).
…ng (#11308)"
This reverts commit e5aef3747c.
The logic of this commit was incorrect:
enabling audit requires a restart of the compute,
because audit extensions use shared_preload_libraries.
So it cannot be done in the configuration phase,
require endpoint restart instead.
## Problem
While working on bulk import, I want to use the `control-plane-url` flag
for a different request.
Currently, the local compute hook is used whenever no control plane is
specified in the config.
My test requires local compute notifications and a configured
`control-plane-url` which isn't supported.
## Summary of changes
Add a `use-local-compute-notifications` flag. When this is set, we use
the local flow regardless of other config values.
It's enabled by default in neon_local and disabled by default in all
other envs. I had to turn the flag off in tests
that wish to bypass the local flow, but that's expected.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
- We need to support multiple SSL CA certificates for graceful root CA
certificate rotation.
- Closes: https://github.com/neondatabase/cloud/issues/25971
## Summary of changes
- Parses `ssl_ca_file` as a pem bundle, which may contain multiple
certificates. Single pem cert is a valid pem bundle, so the change is
backward compatible.
## Problem
- Part of https://github.com/neondatabase/neon/issues/11113
- Building a new `reqwest::Client` for every request is expensive
because it parses CA certs under the hood. It's noticeable in storcon's
flamegraph.
## Summary of changes
- Reuse one `reqwest::Client` for all API calls to avoid parsing CA
certificates every time.
## Problem
Issue https://github.com/neondatabase/neon/issues/11254 describes a case
where restart during a shard split can result in a bad end state in the
database.
## Summary of changes
- Add a reproducer for the issue
- Tighten an existing safety check around updated row counts in
complete_shard_split
## Problem
Various aspects of the controller's job are already described in RFCs,
but the overall service didn't have an RFC that records design tradeoffs
and the top level structure.
## Summary of changes
- Add a retrospective RFC that should be useful for anyone understanding
storage controller functionality
## Problem
part of https://github.com/neondatabase/neon/issues/11279
## Summary of changes
The invisible flag is used to exclude a timeline from synthetic size
calculation. For the first step, let's persist this flag. Most of the
code are following the `is_archived` modification flow.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
SSL certs are loaded only during start up. It doesn't allow the rotation
of short-lived certificates without server restart.
- Closes: https://github.com/neondatabase/cloud/issues/25525
## Summary of changes
- Implement `ReloadingCertificateResolver` which reloads certificates
from disk periodically.
## Problem
Now that stuck connections are quickly terminated it's not easy to
quickly find the right port from the pid to correlate the connection
with the one seen on pageserver side.
## Summary of changes
Call getsockname() and include the local port number in the
no-response-from-pageserver log messages.
## Problem
Currently, we only split tenants into 8 shards once, at the 64 GB split
threshold. For very large tenants, we need to keep splitting to avoid
huge shards. And we also want to eagerly split at a lower threshold to
improve throughput during initial ingestion.
See
https://github.com/neondatabase/cloud/issues/22532#issuecomment-2706215907
for details.
Touches https://github.com/neondatabase/cloud/issues/22532.
Requires #11157.
## Summary of changes
This adds parameters and logic to enable repeated splits when a tenant's
largest timeline divided by shard count exceeds `split_threshold`, as
well as eager initial splits at a lower threshold to speed up initial
ingestion. The default parameters are all set such that they retain the
current behavior in production (only split into 8 shards once, at 64
GB).
* `split_threshold` now specifies a maximum shard size. When a shard
exceeds it, all tenant shards are split by powers of 2 such that all
tenant shards fall below `split_threshold`. Disabled by default, like
today.
* Add `max_split_shards` to specify a max shard count for autosplits.
Defaults to 8 to retain current behavior.
* Add `initial_split_threshold` and `initial_split_shards` to specify a
threshold and target count for eager splits of unsharded tenants.
Defaults to 64 GB and 8 shards to retain current production behavior.
Because this PR sets `initial_split_threshold` to 64 GB by default, it
has the effect of enabling autosplits by default. This was not the case
previously, since `split_threshold` defaults to None, but it is already
enabled across production and staging. This is temporary until we
complete the production rollout.
For more details, see code comments.
This must wait until #11157 has been deployed to Pageservers.
Once this has been deployed to production, we plan to change the
parameters to:
* `split-threshold`: 256 GB
* `initial-split-threshold`: 16 GB
* `initial-split-shards`: 4
* `max-split-shards`: 16
The final split points will thus be:
* Start: 1 shard
* 16 GB: 4 shards
* 1 TB: 8 shards
* 2 TB: 16 shards
We will then change the default settings to be disabled by default.
---------
Co-authored-by: John Spray <john@neon.tech>
## Problem
`fast_import` binary is being run inside neonvms, and they do not
support proper `kubectl describe logs` now, there are a bunch of other
caveats as well: https://github.com/neondatabase/autoscaling/issues/1320
Anyway, we needed a signal if job finished successfully or not, and if
not — at least some error message for the cplane operation. And after [a
short
discussion](https://neondb.slack.com/archives/C07PG8J1L0P/p1741954251813609),
that s3 object is the most convenient at the moment.
## Summary of changes
If `s3_prefix` was provided to `fast_import` call, any job run puts a
status object file into `{s3_prefix}/status/fast_import` with contents
`{"done": true}` or `{"done": false, "error": "..."}`. Added a test as
well
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1741176713523469
The problem is that this function is using `PQgetCopyData(shard->conn,
&resp_buff.data, 1 /* async = true */)`
to try to fetch next message. But this function returns 0 if the whole
message is not present in the buffer.
And input buffer may contain only part of message so result is not
fetched.
## Summary of changes
Use `PQisBusy` + `WaitEventSetWait` to check if data is available and
`PQgetCopyData(shard->conn, &resp_buff.data, 0)` to read whole message
in this case.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
If a tenant gets deleted, delete also all of its timelines. We assume
that by the time a tenant is being deleted, no new timelines are being
created, so we don't need to worry about races with creation in this
situation.
Unlike #11233, which was very simple because it listed the timelines and
invoked timeline deletion, this PR obtains a list of safekeepers to
invoke the tenant deletion on, and then invokes tenant deletion on each
safekeeper that has one or multiple timelines.
Alternative to #11233
Builds on #11288
Part of #9011
## Problem
Pageservers use unencrypted HTTP requests for storage controller API.
- Closes: https://github.com/neondatabase/cloud/issues/25524
## Summary of changes
- Replace hyper0::server::Server with http_utils::server::Server in
storage controller.
- Add HTTPS handler for storage controller API.
- Support `ssl_ca_file` in pageserver.
Timeline IDs do not contain characters that may cause a SQL injection,
but best to always play it safe.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We currently have this code duplicated across different PG versions.
Moving this to an extension would reduce duplication and simplify
maintenance.
## Summary of changes
Moving the LastWrittenLSN code from PG versions to the Neon extension
and linking it with hooks.
Related Postgres PR: https://github.com/neondatabase/postgres/pull/590
Closes: https://github.com/neondatabase/neon/issues/10973
---------
Co-authored-by: Tristan Partin <tristan@neon.tech>
## Problem
The pageserver upcall api was designed to work with control plane or the
storage controller.
We have completed the transition period and now the upcall api only
targets the storage controller.
## Summary of changes
Rename types accordingly and tweak some comments.
## Problem
We had a recent Postgres startup latency (`start_postgres_ms`)
degradation, but it was only caught with SLO alerts. There was actually
an existing test for the same purpose -- `start_postgres_ms`, but it's
doing only two starts, so it's a bit noisy.
## Summary of changes
Add new compute startup latency test that does 100 iterations and
reports p50, p90 and p99 latencies.
Part of https://github.com/neondatabase/cloud/issues/24882
## Problem
Some extensions do not contain tests, which can be easily run on top of
docker-compose or staging.
## Summary of changes
Added the pg_regress based tests for `pg_tiktoken`, `pgx_ulid`, `pg_rag`
Now they will be run on top of docker-compose, but I intend to adopt
them to be run on top staging in the next PRs
## Problem
We're seeing timeline creation failures that look suspiciously like some
race with the cleanup-deletion of initdb temporary directories. I
couldn't spot the bug, but we can make it a bit easier to debug.
Related: https://github.com/neondatabase/neon/issues/11296
## Summary of changes
- Avoid surfacing distracting ENOENT failure to delete as a log error --
this is fine, and can happen if timeline is cancelled while doing
initdb, or if initdb itself has an error where it doesn't write the dir
(this error is surfaced separately)
- Log after purging initdb temp directories
The only difference between
- `pageserver_api::models::TenantConfig` and
- `pageserver::tenant::config::TenantConfOpt`
at this point is that `TenantConfOpt` serializes with
`skip_serializing_if = Option::is_none`.
That is an efficiency improvement for all the places that currently
serde `models::TenantConfig` because new serializations will no longer
write `$fieldname: null` for each field that is `None` at runtime.
This should be particularly beneficial for Storcon, which stores
JSON-serialized `models::TenantConfig` in its DB.
# Behavior Changes
This PR changes the serialization behavior: we omit `None` fields
instead of serializing `$fieldname: null`).
So it's a data format change (see section on compatibility below).
And it changes API responses from Storcon and Pageserver.
## API Response Compatibility
Storcon returns the location description.
Afaik it is passed through into
- storcon_cli output
- storcon UI in console admin UI
These outputs will no longer contain `$fieldname: null` values,
which de-bloats the output (good).
But in storcon UI, it also serves as an editor "default", which
will be eliminated after a storcon with this PR is released.
## Data Format Compatibility
Backwards compat: new software reading old serialized data will
deserialize to the same runtime value because all the field types
are exactly the same and `skip_serializing_if` does not affect
deserialization.
Forward compat: old software reading data serialized by new software
will map absence fields in the serialized form to runtime value
`Option::None`. This is serde default behavior, see this playground
to convince yourself:
https://play.rust-lang.org/?version=stable&mode=debug&edition=2024&gist=f7f4e1a169959a3085b6158c022a05eb
The `serde(with="humantime_serde")` however behaves strangely:
if used on an `Option<Duration>`, it still requires the field to be
present,
unlike the serde default behavior shown in the previous paragraph.
The workaround is to set `serde(default)`.
Previously it was set on each individual field, but, we do have the
container attribute, so, set it there.
This requires deriving a `Default` impl, which, because all fields are
`Option`,
is non-magic.
See my notes here:
https://gist.github.com/problame/eddbc225a5d12617e9f2c6413e0cf799
# Future Work
We should have separate types (& crates) for
- runtime types configuration (e.g. PageServerConf::tenant_config,
AttachedLocationConf)
- `config-v1` file pageserver local disk file format
- `mgmt API`
- `pageserver.toml`
Right now they all use the same, which is convenient but makes it hard
to reason about compatibility breakage.
# Refs
- corresponding docs.neon.build PR
https://github.com/neondatabase/docs/pull/470
## Problem
#11061 changed how artifacts for releases are built, by
reusing/retagging the artifacts from release PRs. This resulted in the
BUILD_TAG that's baked into the images to not be as expected.
Context: https://neondb.slack.com/archives/C08JBTT3R1Q/p1742333300129069
## Summary of changes
Set BUILD_TAG to the release tag of the upcoming release when running
inside release PRs.
In
-
https://github.com/neondatabase/neon/pull/10993#issuecomment-2690428336
I added infinite retries for buffered writer flush IOs, primarily to
gracefully handle ENOSPC but more generally so that the buffered writer
is not left in a state where reads from the surrounding InMemoryLayer
cause panics.
However, I didn't add cancellation sensitivity, which is concerning
because then there is no way to detach a timeline/tenant that is
encountering the write IO errors.
That’s a legitimate scenario in the case of some edge case bug.
See the #10993 description for details.
This PR
- first makes flush loop infallible, enabled by infinite retries
- then adds sensitivity to `Timeline::cancel` to the flush loop, thereby
making it fallible in one specific way again
- finally fixes the InMemoryLayer/EphemeralFile/BufferedWriter
amalgamate to remain read-available after flush loop is cancelled.
The support for read-availability after cancellation is necessary so
that reads from the InMemoryLayer that are already queued up behind the
RwLock that wraps the BufferedWriter won't panic because of the
`mutable=None` that we leave behind in case the flush loop gets
cancelled.
# Alternatives
One might think that we can only ship the change for read-availability
if flush encounters an error, without the infinite retrying and/or
cancellation sensitivity complexity.
The problem with that is that read-availability sounds good but is
really quite useless, because we cannot ingest new WAL without a
writable InMemoryLayer. Thus, very soon after we transition to read-only
mode, reads from compute are going to wait anyway, but on `wait_lsn`
instead of the RwLock, because ingest isn't progressing.
Thus, having the infinite flush retries still makes more sense because
they're just "slowness" to the user, whereas wait_lsn is hard errors.
## Problem
https://github.com/neondatabase/neon/pull/11210 migrated pushing images
to ghcr. Unfortunately, it was incomplete in using images from ghcr,
which resulted in a few places referencing the ghcr build-tools image,
while trying to use docker hub credentials.
## Summary of changes
Use build-tools image from ghcr consistently.
