This pushes the (unlikely) possibility of failure to serialize metadata
out of stop().
That in turn leaves us with only one case of how stop() can fail.
There are two callsites of stop():
1. perform_upload_task: here, we can safely say "unreachable", and I
think any future refactorings that might violate that invariant
would notice, because the unreachable!() is close to the code that
would likely be refactored.
The unreachable!() is desirable there because otherwise we'd need to
think about how to handle the error. Maybe the previous code would
have done the right thing, maybe not.
2. delete_timeline: this is the new one, and, it's far away from the
code that initializes the upload queue. Putting an unreachable!()
there seems risky. So, bail out with an error. It will become a 500
status code, which console shall retry according to the openapi spec.
We have test coverage that the retry can succeed.
Refactoring part of #4093.
Numerious `Send + Sync` bounds were a distraction, that were not needed
at all. The proper `Bytes` usage and one `"error_message".to_string()`
are just drive-by fixes.
Not using the `PostgresBackendTCP` allows us to start setting read
timeouts (and more). `PostgresBackendTCP` is still used from proxy, so
it cannot be removed.
PR `build: run clippy for powerset of features (#4077)` brought us a
`clippy --release` pass.
It was merged after #4030, which fails under `clippy --release` with
```
error: static `TENANT_ID_EXTRACTOR` is never used
--> pageserver/src/tenant/timeline.rs:4270:16
|
4270 | pub static TENANT_ID_EXTRACTOR: once_cell::sync::Lazy<
| ^^^^^^^^^^^^^^^^^^^
|
= note: `-D dead-code` implied by `-D warnings`
error: static `TIMELINE_ID_EXTRACTOR` is never used
--> pageserver/src/tenant/timeline.rs:4276:16
|
4276 | pub static TIMELINE_ID_EXTRACTOR: once_cell::sync::Lazy<
| ^^^^^^^^^^^^^^^^^^^^^
```
A merge queue would have prevented this.
Notes:
- This still needs UI support from the Console
- I've not tuned any GUCs for PostgreSQL to make this work better
- Safekeeper has gotten a tweak in which WAL is sent and how: It now
sends zero-ed WAL data from the start of the timeline's first segment up to
the first byte of the timeline to be compatible with normal PostgreSQL
WAL streaming.
- This includes the commits of #3714
Fixes one part of https://github.com/neondatabase/neon/issues/769
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
- Remove repeated tenant & timeline from span
- Demote logging of the path to debug level
- Log completion at info level, in the same function where we log errors
- distinguish between layer file download success & on-demand download
succeeding as a whole in the log message wording
- Assert that the span contains a tenant id and a timeline id
fixes https://github.com/neondatabase/neon/issues/3945
Before:
```
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{tenant_id=$TENANT_ID timeline_id=$TIMELINE_ID layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: download complete: /storage/pageserver/data/tenants/$TENANT_ID/timelines/$TIMELINE_ID/000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{tenant_id=$TENANT_ID timeline_id=$TIMELINE_ID layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: Rebuilt layer map. Did 9 insertions to process a batch of 1 updates.
```
After:
```
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: layer file download finished
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: Rebuilt layer map. Did 9 insertions to process a batch of 1 updates.
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: on-demand download successful
```
just record the time needed for waiting the lsn and then the basebackup
in a log message in millis. this is related to ongoing investigations to
cold start performance.
this could also be a a counter. it cannot be added next to smgr
histograms, because we don't want another histogram per timeline.
the aim is to allow drilling deeper into which timelines were slow, and
to understand why some need two basebackups.
For the "worst-case /storage usage panel", we need to compute
```
remote size + local-only size
```
We currently don't have a metric for local-only layers.
The number of in-flight layers in the upload queue is just that, so, let
Prometheus scrape it.
The metric is two counters (started and finished).
The delta is the amount of in-flight uploads in the queue.
The metrics are incremented in the respective `call_unfinished_metric_*`
functions.
These track ongoing operations by file_kind and op_kind.
We only need this metric for layer uploads, so, there's the new
RemoteTimelineClientMetricsCallTrackSize type that forces all call sites
to decide whether they want the size tracked or not.
If we find that other file_kinds or op_kinds are interesting (metadata
uploads, layer downloads, layer deletes) are interesting, we can just
enable them, and they'll be just another label combination within the
metrics that this PR adds.
fixes https://github.com/neondatabase/neon/issues/3922
This patch extends the libmetrics logging setup functionality with a
`tracing` layer that increments a Prometheus counter each time we log a
log message. We have the counter per tracing event level. This allows
for monitoring WARN and ERR log volume without parsing the log. Also, it
would allow cross-checking whether logs got dropped on the way into
Loki.
It would be nicer if we could hook deeper into the tracing logging
layer, to avoid evaluating the filter twice.
But I don't know how to do it.
See https://github.com/neondatabase/neon/pull/3991
Brings the changes back with the right way to use new `toml_edit` to
deserialize values and a unit test for this.
All non-trivial updates extracted into separate commits, also `carho hakari` data and its manifest format were updated.
3 sets of crates remain unupdated:
* `base64` — touches proxy in a lot of places and changed its api (by 0.21 version) quite strongly since our version (0.13).
* `opentelemetry` and `opentelemetry-*` crates
```
error[E0308]: mismatched types
--> libs/tracing-utils/src/http.rs:65:21
|
65 | span.set_parent(parent_ctx);
| ---------- ^^^^^^^^^^ expected struct `opentelemetry_api::context::Context`, found struct `opentelemetry::Context`
| |
| arguments to this method are incorrect
|
= note: struct `opentelemetry::Context` and struct `opentelemetry_api::context::Context` have similar names, but are actually distinct types
note: struct `opentelemetry::Context` is defined in crate `opentelemetry_api`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/opentelemetry_api-0.19.0/src/context.rs:77:1
|
77 | pub struct Context {
| ^^^^^^^^^^^^^^^^^^
note: struct `opentelemetry_api::context::Context` is defined in crate `opentelemetry_api`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/opentelemetry_api-0.18.0/src/context.rs:77:1
|
77 | pub struct Context {
| ^^^^^^^^^^^^^^^^^^
= note: perhaps two different versions of crate `opentelemetry_api` are being used?
note: associated function defined here
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/tracing-opentelemetry-0.18.0/src/span_ext.rs:43:8
|
43 | fn set_parent(&self, cx: Context);
| ^^^^^^^^^^
For more information about this error, try `rustc --explain E0308`.
error: could not compile `tracing-utils` due to previous error
warning: build failed, waiting for other jobs to finish...
error: could not compile `tracing-utils` due to previous error
```
`tracing-opentelemetry` of version `0.19` is not yet released, that is supposed to have the update we need.
* similarly, `rustls`, `tokio-rustls`, `rustls-*` and `tls-listener` crates have similar issue:
```
error[E0308]: mismatched types
--> libs/postgres_backend/tests/simple_select.rs:112:78
|
112 | let mut make_tls_connect = tokio_postgres_rustls::MakeRustlsConnect::new(client_cfg);
| --------------------------------------------- ^^^^^^^^^^ expected struct `rustls::client::client_conn::ClientConfig`, found struct `ClientConfig`
| |
| arguments to this function are incorrect
|
= note: struct `ClientConfig` and struct `rustls::client::client_conn::ClientConfig` have similar names, but are actually distinct types
note: struct `ClientConfig` is defined in crate `rustls`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/rustls-0.21.0/src/client/client_conn.rs:125:1
|
125 | pub struct ClientConfig {
| ^^^^^^^^^^^^^^^^^^^^^^^
note: struct `rustls::client::client_conn::ClientConfig` is defined in crate `rustls`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/rustls-0.20.8/src/client/client_conn.rs:91:1
|
91 | pub struct ClientConfig {
| ^^^^^^^^^^^^^^^^^^^^^^^
= note: perhaps two different versions of crate `rustls` are being used?
note: associated function defined here
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/tokio-postgres-rustls-0.9.0/src/lib.rs:23:12
|
23 | pub fn new(config: ClientConfig) -> Self {
| ^^^
For more information about this error, try `rustc --explain E0308`.
error: could not compile `postgres_backend` due to previous error
warning: build failed, waiting for other jobs to finish...
```
* aws crates: I could not make new API to work with bucket endpoint overload, and console e2e tests failed.
Other our tests passed, further investigation is worth to be done in https://github.com/neondatabase/neon/issues/4008
Before this patch, if a tenant would override its eviction_policy
setting to use a lower LayerAccessThreshold::threshold than the
`evictions_low_residence_duration_metric_threshold`, the evictions done
for that tenant would count towards the
`evictions_with_low_residence_duration` metric.
That metric is used to identify pre-mature evictions, commonly triggered
by disk-usage-based eviction under disk pressure.
We don't want that to happen for the legitimate evictions of the tenant
that overrides its eviction_policy.
So, this patch
- moves the setting into TenantConf
- adds test coverage
- updates the staging & prod yamls
Forward Compatibility:
Software before this patch will ignore the new tenant conf field and use
the global one instead.
So we can roll back safely.
Backward Compatibility:
Parsing old configs with software as of this patch will fail in
`PageServerConf::parse_and_validate` with error
`unrecognized pageserver option 'evictions_low_residence_duration_metric_threshold'`
if the option is still present in the global section.
We deal with this by updating the configs in Ansible.
fixes https://github.com/neondatabase/neon/issues/3940
Reason and backtrace are added to the Broken state. Backtrace is automatically collected when tenant entered the broken state. The format for API, CLI and metrics is changed and unified to return tenant state name in camel case. Previously snake case was used for metrics and camel case was used for everything else. Now tenant state field in TenantInfo swagger spec is changed to contain state name in "slug" field and other fields (currently only reason and backtrace for Broken variant in "data" field). To allow for this breaking change state was removed from TenantInfo swagger spec because it was not used anywhere.
Please note that the tenant's broken reason is not persisted on disk so the reason is lost when pageserver is restarted.
Requires changes to grafana dashboard that monitors tenant states.
Closes#3001
---------
Co-authored-by: theirix <theirix@gmail.com>
## Describe your changes
## Issue ticket number and link
#3673
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
All non-trivial updates extracted into separate commits, also `carho
hakari` data and its manifest format were updated.
3 sets of crates remain unupdated:
* `base64` — touches proxy in a lot of places and changed its api (by
0.21 version) quite strongly since our version (0.13).
* `opentelemetry` and `opentelemetry-*` crates
```
error[E0308]: mismatched types
--> libs/tracing-utils/src/http.rs:65:21
|
65 | span.set_parent(parent_ctx);
| ---------- ^^^^^^^^^^ expected struct `opentelemetry_api::context::Context`, found struct `opentelemetry::Context`
| |
| arguments to this method are incorrect
|
= note: struct `opentelemetry::Context` and struct `opentelemetry_api::context::Context` have similar names, but are actually distinct types
note: struct `opentelemetry::Context` is defined in crate `opentelemetry_api`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/opentelemetry_api-0.19.0/src/context.rs:77:1
|
77 | pub struct Context {
| ^^^^^^^^^^^^^^^^^^
note: struct `opentelemetry_api::context::Context` is defined in crate `opentelemetry_api`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/opentelemetry_api-0.18.0/src/context.rs:77:1
|
77 | pub struct Context {
| ^^^^^^^^^^^^^^^^^^
= note: perhaps two different versions of crate `opentelemetry_api` are being used?
note: associated function defined here
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/tracing-opentelemetry-0.18.0/src/span_ext.rs:43:8
|
43 | fn set_parent(&self, cx: Context);
| ^^^^^^^^^^
For more information about this error, try `rustc --explain E0308`.
error: could not compile `tracing-utils` due to previous error
warning: build failed, waiting for other jobs to finish...
error: could not compile `tracing-utils` due to previous error
```
`tracing-opentelemetry` of version `0.19` is not yet released, that is
supposed to have the update we need.
* similarly, `rustls`, `tokio-rustls`, `rustls-*` and `tls-listener`
crates have similar issue:
```
error[E0308]: mismatched types
--> libs/postgres_backend/tests/simple_select.rs:112:78
|
112 | let mut make_tls_connect = tokio_postgres_rustls::MakeRustlsConnect::new(client_cfg);
| --------------------------------------------- ^^^^^^^^^^ expected struct `rustls::client::client_conn::ClientConfig`, found struct `ClientConfig`
| |
| arguments to this function are incorrect
|
= note: struct `ClientConfig` and struct `rustls::client::client_conn::ClientConfig` have similar names, but are actually distinct types
note: struct `ClientConfig` is defined in crate `rustls`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/rustls-0.21.0/src/client/client_conn.rs:125:1
|
125 | pub struct ClientConfig {
| ^^^^^^^^^^^^^^^^^^^^^^^
note: struct `rustls::client::client_conn::ClientConfig` is defined in crate `rustls`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/rustls-0.20.8/src/client/client_conn.rs:91:1
|
91 | pub struct ClientConfig {
| ^^^^^^^^^^^^^^^^^^^^^^^
= note: perhaps two different versions of crate `rustls` are being used?
note: associated function defined here
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/tokio-postgres-rustls-0.9.0/src/lib.rs:23:12
|
23 | pub fn new(config: ClientConfig) -> Self {
| ^^^
For more information about this error, try `rustc --explain E0308`.
error: could not compile `postgres_backend` due to previous error
warning: build failed, waiting for other jobs to finish...
```
* aws crates: I could not make new API to work with bucket endpoint
overload, and console e2e tests failed.
Other our tests passed, further investigation is worth to be done in
https://github.com/neondatabase/neon/issues/4008
The PR changes module function-based walreceiver interface with a
`WalReceiver` struct that exposes a few public methods, `new`, `start`
and `stop` now.
Later, the same struct is planned to be used for getting walreceiver
stats (and, maybe, other extra data) to display during missing wal
errors for https://github.com/neondatabase/neon/issues/2106
Now though, the change required extra logic changes:
* due to the `WalReceiver` struct added, it became easier to pass `ctx`
and later do a `detached_child` instead of
bfee412701/pageserver/src/tenant/timeline.rs (L1379-L1381)
* `WalReceiver::start` which is now the public API to start the
walreceiver, could return an `Err` which now may turn a tenant into
`Broken`, same as the timeline that it tries to load during startup.
* `WalReceiverConf` was added to group walreceiver parameters from
pageserver's tenant config
in real env testing we noted that the disk-usage based eviction sails 1
percentage point above the configured value, which might be a source of
confusion, so it might be better to get rid of that confusion now.
confusion: "I configured 85% but pageserver sails at 86%".
Co-authored-by: Christian Schwarz <christian@neon.tech>
this will help log analysis with the counterpart of already logging all
remote download needs and downloads. ended up with a easily regexable
output in the final round.
This is the the feedback originating from pageserver, so change previous
confusing names to
s/ReplicationFeedback/PageserverFeedback
s/ps_writelsn/last_receive_lsn
s/ps_flushlsn/disk_consistent_lsn
s/ps_apply_lsn/remote_consistent_lsn
I haven't changed on the wire format to keep compatibility. However,
understanding of new field names is added to compute, so once all computes
receive this patch we can change the wire names as well. Safekeepers/pageservers
are deployed roughly at the same time and it is ok to live without feedbacks
during the short period, so this is not a problem there.
Add a condition to switch walreceiver connection to safekeeper that is
located in the same availability zone. Switch happens when commit_lsn of
a candidate is not less than commit_lsn from the active connection. This
condition is expected not to trigger instantly, because commit_lsn of a
current connection is usually greater than commit_lsn of updates from
the broker. That means that if WAL is written continuously, switch can
take a lot of time, but it should happen eventually.
Now protoc 3.15+ is required for building neon.
Fixes https://github.com/neondatabase/neon/issues/3200
This patch adds a pageserver-global background loop that evicts layers
in response to a shortage of available bytes in the $repo/tenants
directory's filesystem.
The loop runs periodically at a configurable `period`.
Each loop iteration uses `statvfs` to determine filesystem-level space
usage. It compares the returned usage data against two different types
of thresholds. The iteration tries to evict layers until app-internal
accounting says we should be below the thresholds. We cross-check this
internal accounting with the real world by making another `statvfs` at
the end of the iteration. We're good if that second statvfs shows that
we're _actually_ below the configured thresholds. If we're still above
one or more thresholds, we emit a warning log message, leaving it to the
operator to investigate further.
There are two thresholds:
- `max_usage_pct` is the relative available space, expressed in percent
of the total filesystem space. If the actual usage is higher, the
threshold is exceeded.
- `min_avail_bytes` is the absolute available space in bytes. If the
actual usage is lower, the threshold is exceeded.
The iteration evicts layers in LRU fashion with a reservation of up to
`tenant_min_resident_size` bytes of the most recent layers per tenant.
The layers not part of the per-tenant reservation are evicted
least-recently-used first until we're below all thresholds. The
`tenant_min_resident_size` can be overridden per tenant as
`min_resident_size_override` (bytes).
In addition to the loop, there is also an HTTP endpoint to perform one
loop iteration synchronous to the request. The endpoint takes an
absolute number of bytes that the iteration needs to evict before
pressure is relieved. The tests use this endpoint, which is a great
simplification over setting up loopback-mounts in the tests, which would
be required to test the statvfs part of the implementation. We will rely
on manual testing in staging to test the statvfs parts.
The HTTP endpoint is also handy in emergencies where an operator wants
the pageserver to evict a given amount of space _now. Hence, it's
arguments documented in openapi_spec.yml. The response type isn't
documented though because we don't consider it stable. The endpoint
should _not_ be used by Console but it could be used by on-call.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Before this patch, the range from which the random delay is picked is at
minimum 10 seconds.
With this patch, they delay is bounded to whatever the given `period`
is, and zero, if period id Duration::ZERO.
Motivation for this: the disk usage eviction tests that we'll add in
https://github.com/neondatabase/neon/pull/3905 need to wait for the disk
usage eviction background loop to do its job.
They set a period of 1s.
It seems wasteful to wait 10 seconds in the tests.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Describe your changes
In [this linter
run](https://github.com/neondatabase/cloud/actions/runs/4553032319/jobs/8029101300?pr=4391)
accidentally found out that spec is invalid. Reference other schemas in
properties should be done the way I changed.
Could not find documentation specifically for schemas embedding in
`components.schemas`, but it seems like the approach is inherited from
json schema:
https://json-schema.org/understanding-json-schema/structuring.html#ref
## Issue ticket number and link
-
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] ~If it is a core feature, I have added thorough tests.~
- [ ] ~Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?~
- [ ] ~If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.~
With fresh rustc brought by
https://github.com/neondatabase/neon/pull/3902, we can use
`std::pin::pin!` macro instead of the tokio one.
One place did not need the macro at all, other places were adjusted.
neon_local sends SIGQUIT, which otherwise dumps core by default. Also, remove
obsolete install_shutdown_handlers; in all binaries it was overridden by
ShutdownSignals::handle later.
ref https://github.com/neondatabase/neon/issues/3847
As of #3867, we do artificial layer accesses to layers that will be
needed after the next restart, but not until then because of caches.
With this patch, we also do that for the accesses that the synthetic
size calculation worker does if consumption metrics are enabled.
The actual size calculation is not of importance, but we need to
calculate all of the sizes, so we only call tenant::size::gather_inputs.
Co-authored-by: Christian Schwarz <christian@neon.tech>
