## Problem
- The condition for eviction is not time-based: it is possible for a
timeline to be restored in response to a client, that client times out,
and then as soon as the timeline is restored it is immediately evicted
again.
- There is no delay on eviction at startup of the safekeeper, so when it
starts up and sees many idle timelines, it does many evictions which
will likely be immediately restored when someone uses the timeline.
## Summary of changes
- Add `eviction_min_resident` parameter, and use it in
`ready_for_eviction` to avoid evictions if the timeline has been
resident for less than this period.
- This also implicitly delays evictions at startup for
`eviction_min_resident`
- Set this to a very low number for the existing eviction test, which
expects immediate eviction.
The default period is 15 minutes. The general reasoning for that is that
in the worst case where we thrash ~10k timelines on one safekeeper,
downloading 16MB for each one, we should set a period that would not
overwhelm the node's bandwidth.
## Problem
This test incorrectly assumed that a post-split compaction would only
drop content. This was easily destabilized by any changes to image
generation rules.
## Summary of changes
- Before split, do a full image layer generation pass, to guarantee that
post-split compaction should only drop data, never create it.
- Fix the force_image_layer_creation mode of compaction that we use from
tests like this: previously it would try and generate image layers even
if one already existed with the same layer key, which caused compaction
to fail.
I want to fix bugs in `page_service`
([issue](https://github.com/neondatabase/neon/issues/7427)) and the
`import basebackup` / `import wal` stand in the way / make the
refactoring more complicated.
We don't use these methods anyway in practice, but, there have been some
objections to removing the functionality completely.
So, this PR preserves the existing functionality but moves it into the
HTTP management API.
Note that I don't try to fix existing bugs in the code, specifically not
fixing
* it only ever worked correctly for unsharded tenants
* it doesn't clean up on error
All errors are mapped to `ApiError::InternalServerError`.
## Summary of changes
Increase the `assert_size_approx_equal` threshold to avoid flakiness of
`test_lsn_lease_size`. Still needs more investigation to fully resolve
#8293.
- Also set `autovacuum=off` for the endpoint we are running in the test.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
`test_timeline_size_quota_on_startup` assumed that writing data beyond
the size limit would always be blocked. This is not so: the limit is
only enforced if feedback makes it back from the pageserver to the
safekeeper + compute.
Closes: https://github.com/neondatabase/neon/issues/6562
## Summary of changes
- Modify the test to wait for the pageserver to catch up. The size limit
was never actually being enforced robustly, the original version of this
test was just writing much more than 30MB and about 98% of the time
getting lucky such that the feedback happened to arrive before the tests
for loop was done.
- If the test fails, log the logical size as seen by the pageserver.
## Problem
Debug-mode runs of test_pg_regress are rather slow since
https://github.com/neondatabase/neon/pull/8105, and occasionally exceed
their 600s timeout.
## Summary of changes
- Use 8MiB layer files, avoiding large ephemeral layers
On a hetzner AX102, this takes the runtime from 230s to 190s. Which
hopefully will be enough to get the runtime on github runners more
reliably below its 600s timeout.
This has the side benefit of exercising more of the pageserver stack
(including compaction) under a workload that exercises a more diverse
set of postgres functionality than most of our tests.
These tests will help verify that replication, both physical and
logical, works as expected in Neon.
Co-authored-by: Sasha Krassovsky <sasha@neon.tech>
Allows a process to run without blocking program execution, which can be
useful for certain test scenarios.
Co-authored-by: Sasha Krassovsky <sasha@neon.tech>
## Problem
test_subscriber_restart has quit large failure rate'
https://neonprod.grafana.net/d/fddp4rvg7k2dcf/regression-test-failures?orgId=1&var-test_name=test_subscriber_restart&var-max_count=100&var-restrict=false
I can be caused by too small timeout (5 seconds) to wait until changes
are propagated.
Related to #8097
## Summary of changes
Increase timeout to 30 seconds.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We want to be able to test how our infrastructure reacts on segfaults in
Postgres (for example, we collect cores, and get some required
logs/metrics, etc)
## Summary of changes
- Add `trigger_segfauls` function to `neon_test_utils` to trigger a
segfault in Postgres
- Add `trigger_panic` function to `neon_test_utils` to trigger SIGABRT
(by using `elog(PANIC, ...))
- Fix cleanup logic in regression tests in endpoint crashed
## Problem
This test directly manages locations on pageservers and configuration of
an endpoint. However, it did not switch off the parts of the storage
controller that attempt to do the same: occasionally, the test would
fail in a strange way such as a compute failing to accept a
reconfiguration request.
## Summary of changes
- Wire up the storage controller's compute notification hook to a no-op
handler
- Configure the tenant's scheduling policy to Stop.
## Problem
See #7466
## Summary of changes
Implement algorithm descried in
https://hal.science/hal-00465313/document
Now new GUC is added:
`neon.wss_max_duration` which specifies size of sliding window (in
seconds). Default value is 1 hour.
It is possible to request estimation of working set sizes (within this
window using new function
`approximate_working_set_size_seconds`. Old function
`approximate_working_set_size` is preserved for backward compatibility.
But its scope is also limited by `neon.wss_max_duration`.
Version of Neon extension is changed to 1.4
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Matthias van de Meent <matthias@neon.tech>
Part of #7497, closes#8071. (accidentally closed#8208, reopened here)
## Problem
After the changes in #8084, we need synthetic size to also account for
leased LSNs so that users do not get free retention by running a small
ephemeral endpoint for a long time.
## Summary of changes
This PR integrates LSN leases into the synthetic size calculation. We
model leases as read-only branches started at the leased LSN (except it
does not have a timeline id).
Other changes:
- Add new unit tests testing whether a lease behaves like a read-only
branch.
- Change `/size_debug` response to include lease point in the SVG
visualization.
- Fix `/lsn_lease` HTTP API to do proper parsing for POST.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
When generations were new, these messages were an important way of
noticing if something unexpected was going on. We found some real issues
when investigating tests that unexpectedly tripped them.
At time has gone on, this code is now pretty battle-tested, and as we do
more live migrations etc, it's fairly normal to see the occasional
message from a node with a stale generation.
At this point the cognitive load on developers to selectively allow-list
these logs outweighs the benefit of having them at warn severity.
Closes: https://github.com/neondatabase/neon/issues/8080
## Summary of changes
- Downgrade "Dropped remote consistent LSN updates" and "Dropping stale
deletions" messages to INFO
- Remove all the allow-list entries for these logs.
## Problem
`pg-clients` workflow looks different from the main `build-and-test`
workflow for historical reasons (it was my very first task at Neon, and
back then I wasn't really familiar with the rest of the CI pipelines).
This PR unifies `pg-clients` workflow with `build-and-test`
## Summary of changes
- Rename `pg_clients.yml` to `pg-clients.yml`
- Run the workflow on changes in relevant files
- Create Allure report for tests
- Send slack notifications to `#on-call-qa-staging-stream` channel
(instead of `#on-call-staging-stream`)
- Update Client libraries once we're here
## Problem
The metrics we have today aren't convenient for planning around the
impact of timeline archival on costs.
Closes: https://github.com/neondatabase/neon/issues/8108
## Summary of changes
- Add metric `pageserver_archive_size`, which indicates the logical
bytes of data which we would expect to write into an archived branch.
- Add metric `pageserver_pitr_history_size`, which indicates the
distance between last_record_lsn and the PITR cutoff.
These metrics are somewhat temporary: when we implement #8088 and
associated consumption metric changes, these will reach a final form.
For now, an "archived" branch is just any branch outside of its parent's
PITR window: later, archival will become an explicit state (which will
_usually_ correspond to falling outside the parent's PITR window).
The overall volume of timeline metrics is something to watch, but we are
removing many more in https://github.com/neondatabase/neon/pull/8245
than this PR is adding.
we want to run some specific pagebench test cases on dedicated hardware
to get reproducible results
run1: 1 client per tenant => characterize throughput with n tenants.
- 500 tenants
- scale 13 (200 MB database)
- 1 hour duration
- ca 380 GB layer snapshot files
run2.singleclient: 1 client per tenant => characterize latencies
run2.manyclient: N clients per tenant => characterize throughput
scalability within one tenant.
- 1 tenant with 1 client for latencies
- 1 tenant with 64 clients because typically for a high number of
connections we recommend the connection pooler
which by default uses 64 connections (for scalability)
- scale 136 (2048 MB database)
- 20 minutes each
All the code to ensure the WAL record lands at a page boundary was
unnecessary for reproducing the original problem. In fact, it's a pretty
basic test that checks that outbound replication (= neon as publisher)
still works after restarting the endpoint. It just used to be very
broken before commit 5ceccdc7de, which also added this test.
To verify that:
1. Check out commit f3af5f4660 (because the next commit, 7dd58e1449,
fixed the same bug in a different way, making it infeasible to revert
the bug fix in an easy way)
2. Revert the bug fix from commit 5ceccdc7de with this:
```
diff --git a/pgxn/neon/walproposer_pg.c b/pgxn/neon/walproposer_pg.c
index 7debb6325..9f03bbd99 100644
--- a/pgxn/neon/walproposer_pg.c
+++ b/pgxn/neon/walproposer_pg.c
@@ -1437,8 +1437,10 @@ XLogWalPropWrite(WalProposer *wp, char *buf, Size nbytes, XLogRecPtr recptr)
*
* https://github.com/neondatabase/neon/issues/5749
*/
+#if 0
if (!wp->config->syncSafekeepers)
XLogUpdateWalBuffers(buf, recptr, nbytes);
+#endif
while (nbytes > 0)
{
```
3. Run the test_wal_page_boundary_start regression test. It fails, as
expected
4. Apply this commit to the test, and run it again. It still fails, with
the same error mentioned in issue #5749:
```
PG:2024-06-30 20:49:08.805 GMT [1248196] STATEMENT: START_REPLICATION SLOT "sub1" LOGICAL 0/0 (proto_version '4', origin 'any', publication_names '"pub1"')
PG:2024-06-30 21:37:52.567 GMT [1467972] LOG: starting logical decoding for slot "sub1"
PG:2024-06-30 21:37:52.567 GMT [1467972] DETAIL: Streaming transactions committing after 0/1532330, reading WAL from 0/1531C78.
PG:2024-06-30 21:37:52.567 GMT [1467972] STATEMENT: START_REPLICATION SLOT "sub1" LOGICAL 0/0 (proto_version '4', origin 'any', publication_names '"pub1"')
PG:2024-06-30 21:37:52.567 GMT [1467972] LOG: logical decoding found consistent point at 0/1531C78
PG:2024-06-30 21:37:52.567 GMT [1467972] DETAIL: There are no running transactions.
PG:2024-06-30 21:37:52.567 GMT [1467972] STATEMENT: START_REPLICATION SLOT "sub1" LOGICAL 0/0 (proto_version '4', origin 'any', publication_names '"pub1"')
PG:2024-06-30 21:37:52.568 GMT [1467972] ERROR: could not find record while sending logically-decoded data: invalid contrecord length 312 (expected 6) at 0/1533FD8
```
## Problem
See https://github.com/neondatabase/cloud/issues/14289
and PR #8210
## Summary of changes
Add test for problems fixed in #8210
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Tenant attachment has error paths for failures to write local
configuration, but these types of local storage I/O errors should be
considered fatal for the process. Related thread on an earlier PR that
touched this code:
https://github.com/neondatabase/neon/pull/7947#discussion_r1655134114
## Summary of changes
- Make errors writing tenant config fatal (abort process)
- When reading tenant config, make all I/O errors except ENOENT fatal
- Replace use of bare anyhow errors with `LoadConfigError`
Before this PR, `RemoteStorageConfig::from_toml` would support
deserializing an
empty `{}` TOML inline table to a `None`, otherwise try `Some()`.
We can instead let
* in proxy: let clap derive handle the Option
* in PS & SK: assume that if the field is specified, it must be a valid
RemtoeStorageConfig
(This PR started with a much simpler goal of factoring out the
`deserialize_item` function because I need that in another PR).
We have one pretty serious MVCC visibility bug with hot standby
replicas. We incorrectly treat any transactions that are in progress
in the primary, when the standby is started, as aborted. That can
break MVCC for queries running concurrently in the standby. It can
also lead to hint bits being set incorrectly, and that damage can last
until the replica is restarted.
The fundamental bug was that we treated any replica start as starting
from a shut down server. The fix for that is straightforward: we need
to set 'wasShutdown = false' in InitWalRecovery() (see changes in the
postgres repo).
However, that introduces a new problem: with wasShutdown = false, the
standby will not open up for queries until it receives a running-xacts
WAL record from the primary. That's correct, and that's how Postgres
hot standby always works. But it's a problem for Neon, because:
* It changes the historical behavior for existing users. Currently,
the standby immediately opens up for queries, so if they now need to
wait, we can breka existing use cases that were working fine
(assuming you don't hit the MVCC issues).
* The problem is much worse for Neon than it is for standalone
PostgreSQL, because in Neon, we can start a replica from an
arbitrary LSN. In standalone PostgreSQL, the replica always starts
WAL replay from a checkpoint record, and the primary arranges things
so that there is always a running-xacts record soon after each
checkpoint record. You can still hit this issue with PostgreSQL if
you have a transaction with lots of subtransactions running in the
primary, but it's pretty rare in practice.
To mitigate that, we introduce another way to collect the
running-xacts information at startup, without waiting for the
running-xacts WAL record: We can the CLOG for XIDs that haven't been
marked as committed or aborted. It has limitations with
subtransactions too, but should mitigate the problem for most users.
See https://github.com/neondatabase/neon/issues/7236.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The 'running' boolean was replaced with a semaphore in commit
f0e2bb79b2, but this initialization was missed. Remove it so that if a
test tries to access it, you get an error rather than always claiming
that the endpoint is not running.
Spotted by Arseny at
https://github.com/neondatabase/neon/pull/7288#discussion_r1660068657
Whenever we see an XLOG_MULTIXACT_CREATE_ID WAL record, we need to
update the nextMulti and NextMultiOffset fields in the pageserver's
copy of the CheckPoint struct, to cover the new multi-XID. In
PostgreSQL, this is done by updating an in-memory struct during WAL
replay, but because in Neon you can start a compute node at any LSN,
we need to have an up-to-date value pre-calculated in the pageserver
at all times. We do the same for nextXid.
However, we had a bug in WAL ingestion code that does that: the
multi-XIDs will wrap around at 2^32, just like XIDs, so we need to do
the comparisons in a wraparound-aware fashion.
Fix that, and add tests.
Fixes issue #6520
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
At the start of do_tenant_shard_split, we drop any secondary location
for the parent shards. The reconciler uses presence of secondary
locations as a condition for enabling heatmaps.
On the pageserver, child shards inherit their configuration from
parents, but the storage controller assumes the child's ObservedState is
the same as the parent's config from the prepare phase. The result is
that some child shards end up with inaccurate ObservedState, and until
something next migrates or restarts, those tenant shards aren't
uploading heatmaps, so their secondary locations are downloading
everything that was resident at the moment of the split (including
ancestor layers which are often cleaned up shortly after the split).
Closes: https://github.com/neondatabase/neon/issues/8189
## Summary of changes
- Use PlacementPolicy to control enablement of heatmap upload, rather
than the literal presence of secondaries in IntentState: this way we
avoid switching them off during shard split
- test: during tenant split test, assert that the child shards have
heatmap uploads enabled.
## Problem
For some time, we have created tenants with calls to location_conf. The
legacy "POST /v1/tenant" path was only used in some tests.
## Summary of changes
- Remove the API
- Relocate TenantCreateRequest to the controller API file (this used to
be used in both pageserver and controller APIs)
- Rewrite tenant_create test helper to use location_config API, as
control plane and storage controller do
- Update docker-compose test script to create tenants with
location_config API (this small commit is also present in
https://github.com/neondatabase/neon/pull/7947)
## Problem
Background node operations take a long time for loaded nodes.
## Summary of changes
Increase number of concurrent reconciles an operation is allowed to
spawn.
This should make drain and fill operations faster and the new value is
still well below the total limit of concurrent reconciles.
- Add --safekeepers option to neon_local reconfigure
- Add it to python Endpoint reconfigure
- Implement config reload in walproposer by restarting the whole bgw when
safekeeper list changes.
ref https://github.com/neondatabase/neon/issues/6341
Also, modify the "neon_local timeline import" command so that it
doesn't create the endpoint any more. I don't see any reason to bundle
that in the same command, the "timeline create" and "timeline branch"
commands don't do that either.
I plan to add more tests similar to 'test_import_at_2bil', this will
help to reduce the copy-pasting.
Fixes https://github.com/neondatabase/neon/issues/6337
Add safekeeper support to switch between `Present` and
`Offloaded(flush_lsn)` states. The offloading is disabled by default,
but can be controlled using new cmdline arguments:
```
--enable-offload
Enable automatic switching to offloaded state
--delete-offloaded-wal
Delete local WAL files after offloading. When disabled, they will be left on disk
--control-file-save-interval <CONTROL_FILE_SAVE_INTERVAL>
Pending updates to control file will be automatically saved after this interval [default: 300s]
```
Manager watches state updates and detects when there are no actvity on
the timeline and actual partial backup upload in remote storage. When
all conditions are met, the state can be switched to offloaded.
In `timeline.rs` there is `StateSK` enum to support switching between
states. When offloaded, code can access only control file structure and
cannot use `SafeKeeper` to accept new WAL.
`FullAccessTimeline` is now renamed to `WalResidentTimeline`. This
struct contains guard to notify manager about active tasks requiring
on-disk WAL access. All guards are issued by the manager, all requests
are sent via channel using `ManagerCtl`. When manager receives request
to issue a guard, it unevicts timeline if it's currently evicted.
Fixed a bug in partial WAL backup, it used `term` instead of
`last_log_term` previously.
After this commit is merged, next step is to roll this change out, as in
issue #6338.
## Problem
We install Postgres 14 in `build-tools` image, but we don't need
it. We use Postgres binaries, which we build ourselves.
## Summary of changes
- Remove Postgresql 14 installation from `build-tools` image
This was a half-finished mechanism to allow a replica to enter hot
standby mode sooner, without waiting for a running-xacts record. It had
issues, and we are working on a better mechanism to replace it.
The control plane might still set the flag in the spec file, but
compute_ctl will simply ignore it.
Adds manual compaction trigger; add gc compaction to test_gc_feedback
Part of https://github.com/neondatabase/neon/issues/8002
```
test_gc_feedback[debug-pg15].logical_size: 50 Mb
test_gc_feedback[debug-pg15].physical_size: 2269 Mb
test_gc_feedback[debug-pg15].physical/logical ratio: 44.5302
test_gc_feedback[debug-pg15].max_total_num_of_deltas: 7
test_gc_feedback[debug-pg15].max_num_of_deltas_above_image: 2
test_gc_feedback[debug-pg15].logical_size_after_bottom_most_compaction: 50 Mb
test_gc_feedback[debug-pg15].physical_size_after_bottom_most_compaction: 287 Mb
test_gc_feedback[debug-pg15].physical/logical ratio after bottom_most_compaction: 5.6312
test_gc_feedback[debug-pg15].max_total_num_of_deltas_after_bottom_most_compaction: 4
test_gc_feedback[debug-pg15].max_num_of_deltas_above_image_after_bottom_most_compaction: 1
```
## Summary of changes
* Add the manual compaction trigger
* Use in test_gc_feedback
* Add a guard to avoid running it with retain_lsns
* Fix: Do `schedule_compaction_update` after compaction
* Fix: Supply deltas in the correct order to reconstruct value
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
These APIs have been deprecated for some time, but were still used from
test code.
Closes: https://github.com/neondatabase/neon/issues/4282
## Summary of changes
- It is still convenient to do a "tenant_attach" from a test without
having to write out a location_conf body, so those test methods have
been retained with implementations that call through to their
location_conf equivalent.
Part of #7497, closes#8120.
## Summary of changes
This PR adds a metric to track the number of valid leases after `GCInfo`
gets refreshed each time.
Besides this metric, we should also track disk space and synthetic size
(after #8071 is closed) to make sure leases are used properly.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Part of #7497, closes#8072.
## Problem
Currently the `get_lsn_by_timestamp` and branch creation pageserver APIs do not provide a pleasant client experience where the looked-up LSN might be GC-ed between the two API calls.
This PR attempts to prevent common races between GC and branch creation by making use of LSN leases provided in #8084. A lease can be optionally granted to a looked-up LSN. With the lease, GC will not touch layers needed to reconstruct all pages at this LSN for the duration of the lease.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
- `test_storage_controller_many_tenants` can fail with warnings in the
storage controller about tenant creation holding a lock for too long,
because this test stresses the machine running the test with many
concurrent timeline creations
- `test_tenant_delete_smoke` can fail when synthetic remote storage
errors show up
## Summary of changes
- tolerate warnings about slow timeline creation in
test_storage_controller_many_tenants
- tolerate both possible errors during error_tolerant_delete
## Problem
This test could occasionally trigger a "removing local file ... because
it has unexpected length log" when using the
`compact-shard-ancestors-persistent` failpoint is in use, which is
unexpected because that failpoint stops the process when the remote
metadata is in sync with local files.
It was because there are two shards on the same pageserver, and while
the one being compacted explicitly stops at the failpoint, another shard
was compacting in the background and failing at an unclean point. The
test intends to disable background compaction, but was mistakenly
revoking the value of `compaction_period` when it updated
`pitr_interval`.
Example failure:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8123/9602976462/index.html#/testresult/7dd6165da7daef40
## Summary of changes
- Update `TENANT_CONF` in the test to use properly typed values, so that
it is usable in pageserver APIs as well as via neon_local.
- When updating tenant config with `pitr_interval`, retain the overrides
from the start of the test, so that there won't be any background
compaction going on during the test.
## Problem
Fixes https://github.com/neondatabase/neon/issues/1287
## Summary of changes
tokio-postgres now supports arbitrary server params through the
`param(key, value)` method. Some keys are special so we explicitly
filter them out.
## Problem
For testing, the storage controller has a built-in hack that loads
neon_local endpoint config from disk, and uses it to reconfigure
endpoints when the attached pageserver changes.
Some tests that stop an endpoint while the storage controller is running
could occasionally fail on log errors from the controller trying to use
its special test-mode calls into neon local Endpoint.
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8117/9592392425/index.html#/testresult/9d2bb8623d0d53f8
## Summary of changes
- Give NotifyError an explicit NeonLocal variant, to avoid munging these
into generic 500s (I don't want to ignore 500s in general)
- Allow-list errors related to the local notification hook.
The expectation is that tests using endpoints/workloads should be
independently checking that those endpoints work: if neon_local
generates an error inside the storage controller, that's ignorable.
## Problem
There's no way to cancel drain and fill operations.
## Summary of changes
Implement HTTP endpoints to allow cancelling of background operations.
When the operationis cancelled successfully, the node scheduling policy will revert to
`Active`.
In #7957 we enabled deletion without attachment, but retained the
old-style deletion (return 202, delete in background) for attached
tenants. In this PR, we remove the old-style deletion path, such that if
the tenant delete API is invoked while a tenant is detached, it is
simply detached before completing the deletion.
This intentionally doesn't rip out all the old deletion code: in case a
deletion was in progress at time of upgrade, we keep around the code for
finishing it for one release cycle. The rest of the code removal happens
in https://github.com/neondatabase/neon/pull/8091
Now that deletion will always be via the new path, the new path is also
updated to use some retries around remote storage operations, to
tripping up the control plane with 500s if S3 has an intermittent issue.
## Problem
see https://github.com/neondatabase/neon/issues/8070
## Summary of changes
the neon_local subcommands to
- start neon
- start pageserver
- start safekeeper
- start storage controller
get a new option -t=xx or --start-timeout=xx which allows to specify a
longer timeout in seconds we wait for the process start.
This is useful in test cases where the pageserver has to read a lot of
layer data, like in pagebench test cases.
In addition we exploit the new timeout option in the python test
infrastructure (python fixtures) and modify the flaky testcase to
increase the timeout from 10 seconds to 1 minute.
Example from the test execution
```bash
RUST_BACKTRACE=1 NEON_ENV_BUILDER_USE_OVERLAYFS_FOR_SNAPSHOTS=1 DEFAULT_PG_VERSION=15 BUILD_TYPE=release ./scripts/pytest test_runner/performance/pageserver/pagebench/test_pageserver_max_throughput_getpage_at_latest_lsn.py
...
2024-06-19 09:29:34.590 INFO [neon_fixtures.py:1513] Running command "/instance_store/neon/target/release/neon_local storage_controller start --start-timeout=60s"
2024-06-19 09:29:36.365 INFO [broker.py:34] starting storage_broker to listen incoming connections at "127.0.0.1:15001"
2024-06-19 09:29:36.365 INFO [neon_fixtures.py:1513] Running command "/instance_store/neon/target/release/neon_local pageserver start --id=1 --start-timeout=60s"
2024-06-19 09:29:36.366 INFO [neon_fixtures.py:1513] Running command "/instance_store/neon/target/release/neon_local safekeeper start 1 --start-timeout=60s"
```
