Recently we started doing sync-safekeepers before exiting compute_ctl,
expecting that it will make next sync faster by skipping recovery. But
recovery is still running in some cases
(https://github.com/neondatabase/neon/pull/4574#issuecomment-1629256166)
because of the lagging truncateLsn. This PR should help with updating
truncateLsn.
This addresses the issue in #4526 by adding a test that reproduces the
race condition that gave rise to the bug (or at least *a* race condition
that gave rise to the same error message), and then implementing a fix
that just prints a message to the log if a file could not been found for
uploading. Even though the underlying race condition is not fixed yet,
this will un-block the upload queue in that situation, greatly reducing
the impact of such a (rare) race.
Fixes#4526.
## Problem
Postgres submodule can be changed unintentionally, and these changes are
easy to miss during the review.
Adding a check that should prevent this from happening, the check fails
`build-neon` job with the following message:
```
Expected postgres-v14 rev to be at '1414141414141414141414141414141414141414', but it is at '1144aee1661c79eec65e784a8dad8bd450d9df79'
Expected postgres-v15 rev to be at '1515151515151515151515151515151515151515', but it is at '1984832c740a7fa0e468bb720f40c525b652835d'
Please update vendors/revisions.json if these changes are intentional.
```
This is an alternative approach to
https://github.com/neondatabase/neon/pull/4603
## Summary of changes
- Add `vendor/revisions.json` file with expected revisions
- Add built-time check (to `build-neon` job) that Postgres submodules
match revisions from `vendor/revisions.json`
- A couple of small improvements for logs from
https://github.com/neondatabase/neon/pull/4603
- Fixed GitHub autocomment for no tests was run case
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
The comment referenced an issue that was already closed. Remove that
reference and replace it with an explanation why we already don't print
an error.
See discussion in
https://github.com/neondatabase/neon/issues/2934#issuecomment-1626505916
For the TOCTOU fixes, the two calls after the `.exists()` both didn't
handle the situation well where the file was deleted after the initial
`.exists()`: one would assume that the path wasn't a file, giving a bad
error, the second would give an accurate error but that's not wanted
either.
We remove both racy `exists` and `is_file` checks, and instead just look
for errors about files not being found.
## Problem
If we fail to wake up the compute node, a subsequent connect attempt
will definitely fail. However, kubernetes won't fail the connection
immediately, instead it hangs until we timeout (10s).
## Summary of changes
Refactor the loop to allow fast retries of compute_wake and to skip a
connect attempt.
## Problem
Binaries created from PRs (both in docker images and for tests) have
wrong git-env versions, they point to phantom merge commits.
## Summary of changes
- Prefer GIT_VERSION env variable even if git information was accessible
- Use `${{ github.event.pull_request.head.sha || github.sha }}` instead
of `${{ github.sha }}` for `GIT_VERSION` in workflows
So the builds will still happen from this phantom commit, but we will
report the PR commit.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
part of https://github.com/neondatabase/neon/pull/4340
## Summary of changes
Remove LayerDescriptor and remove `todo!`. At the same time, this PR
adds `AsLayerDesc` trait for all persistent layers and changed
`LayerFileManager` to have a generic type. For tests, we are now using
`LayerObject`, which is a wrapper around `PersistentLayerDesc`.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Before this PR, during shutdown, we'd find naked logs like this one for every active page service connection:
```
2023-07-05T14:13:50.791992Z INFO shutdown request received in run_message_loop
```
This PR
1. adds a peer_addr span field to distinguish the connections in logs
2. sets the tenant_id / timeline_id fields earlier
It would be nice to have `tenant_id` and `timeline_id` directly on
the `page_service_conn_main` span (empty, initially), then set
them at the top of `process_query`.
The problem is that the debug asserts for `tenant_id` and
`timeline_id` presence in the tracing span doesn't support
detecting empty values [1].
So, I'm a bit hesitant about over-using `Span::record`.
[1] https://github.com/neondatabase/neon/issues/4676
We see the following log lines occasionally in prod:
```
kill_and_wait_impl{pid=1983042}: wait successful exit_status=signal: 9 (SIGKILL)
```
This PR makes it easier to find the tenant for the pid, by including the
tenant id as a field in the span.
It started from few config methods that have various orderings and
sometimes use references sometimes not. So I unified path manipulation
methods to always order tenant_id before timeline_id and use referenced
because we dont need owned values.
Similar changes happened to call-sites of config methods.
I'd say its a good idea to always order tenant_id before timeline_id so
it is consistent across the whole codebase.
## Problem
`docker build ... -f Dockerfile.compute-node ...` fails on ARM (I'm
checking on macOS).
## Summary of changes
- Download the arm version of cmake on arm
## Problem
#4598 compute nodes are not accessible some time after wake up due to
kubernetes DNS not being fully propagated.
## Summary of changes
Update connect retry mechanism to support handling IO errors and
sleeping for 100ms
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Problem
I was reading the code of the page server today and found these minor
things that I thought could be cleaned up.
## Summary of changes
* remove a redundant indentation layer and continue in the flushing loop
* use the builtin `PartialEq` check instead of hand-rolling a `range_eq`
function
* Add a missing `>` to a prominent doc comment
General Rust Write trait semantics (as well as its async brother) is that write
definitely happens only after Write::flush(). This wasn't needed in sync where
rust write calls the syscall directly, but is required in async.
Also fix setting initial end_pos in walsender, sometimes it was from the future.
fixes https://github.com/neondatabase/neon/issues/4518
## Problem
Compute is not always able to reconnect to pages server.
First of all it caused by long time of restart of pageserver.
So number of attempts is increased from 5 (hardcoded) to 60 (GUC).
Also we do not perform flush after each command to increase performance
(it is especially critical for prefetch).
Unfortunately such pending flush makes it not possible to transparently
reconnect to restarted pageserver.
What we can do is to try to minimzie such probabilty.
Most likely broken connection will be detected in first sens command
after some idle period.
This is why max_flush_delay parameter is added which force flush to be
performed after first request after some idle period.
See #4497
## Summary of changes
Add neon.max_reconnect_attempts and neon.max_glush_delay GUCs which
contol when flush has to be done
and when it is possible to try to reconnect to page server
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
- Running the command according to docker.md gives warning and error.
- Warning `permissions should be u=rw (0600) or less` is output when
executing `psql -h localhost -p 55433 -U cloud_admin`.
- `FATAL: password authentication failed for user "root”` is output in
compute logs.
## Summary of changes
- Add `$ chmod 600 ~/.pgpass` in docker.md to avoid warning.
- Add username (cloud_admin) to pg_isready command in docker-compose.yml
to avoid error.
---------
Co-authored-by: Tomoka Hayashi <tomoka.hayashi@ntt.com>
```
CREATE EXTENSION embedding;
CREATE TABLE t (val real[]);
INSERT INTO t (val) VALUES ('{0,0,0}'), ('{1,2,3}'), ('{1,1,1}'), (NULL);
CREATE INDEX ON t USING hnsw (val) WITH (maxelements = 10, dims=3, m=3);
INSERT INTO t (val) VALUES (array[1,2,4]);
SELECT * FROM t ORDER BY val <-> array[3,3,3];
val
---------
{1,2,3}
{1,2,4}
{1,1,1}
{0,0,0}
(5 rows)
```
Does three things:
* add a `Display` impl for `LayerFileName` equal to the `short_id`
* based on that, replace the `Layer::short_id` function by a requirement
for a `Display` impl
* use that `Display` impl in the places where the `short_id` and `file_name()` functions were used instead
Fixes#4145
Looking at logs from staging and prod, I found there are a bunch of log
lines without tenant / timeline context.
Manully walk through all task_mgr::spawn lines and fix that using the
least amount of work required.
While doing it, remove some redundant `shutting down` messages.
refs https://github.com/neondatabase/neon/issues/4222
After announcing `hnsw`, there is a hypothesis that the community will
start comparing it with `pgvector` by themselves. Therefore, let's have
an actual version of `pgvector` in Neon.
Cache up to 20 connections per endpoint. Once all pooled connections
are used current implementation can open an extra connection, so the
maximum number of simultaneous connections is not enforced.
There are more things to do here, especially with background clean-up
of closed connections, and checks for transaction state. But current
implementation allows to check for smaller coonection latencies that
this cache should bring.
## Problem
HNSW index is created in memory.
Try to prevent OOM by checking of available RAM.
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
In case we try to connect to an outdated address that is no longer valid, the
default behavior of Kubernetes is to drop the packets, causing us to wait for
the entire timeout period. We want to fail fast in such cases.
A specific case to consider is when we have cached compute node information
with a 5-minute TTL (Time To Live), but the user has executed a `/suspend` API
call, resulting in the nonexistence of the compute node.
## Problem
While pbkdf2 is a simple algorithm, we should probably use a well tested
implementation
## Summary of changes
* Use pbkdf2 crate
* Use arrays like the hmac comment says
## Checklist before requesting a review
- [X] I have performed a self-review of my code.
- [X] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
This renames the `pageserver_tenant_synthetic_size` metric to
`pageserver_tenant_synthetic_cached_size_bytes`, as was requested on
slack (link in the linked issue).
* `_cached` to hint that it is not incrementally calculated
* `_bytes` to indicate the unit the size is measured in
Fixes#3748
## Problem
1. The local endpoints provision 2 ports (postgres and HTTP) which means
the migration_check endpoint has a different port than what the setup
implies
2. psycopg2-binary 2.9.3 has a deprecated poetry config and doesn't
install.
## Summary of changes
Update psycopg2-binary and update the endpoint ports in the readme
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Allure does not support ansi colored logs, yet `compute_ctl` has them.
Upgrade criterion to get rid of atty dependency, disable ansi colors,
remove atty dependency and disable ansi feature of tracing-subscriber.
This is a heavy-handed approach. I am not aware of a workflow where
you'd want to connect a terminal directly to for example `compute_ctl`,
usually you find the logs in a file. If someone had been using colors,
they will now need to:
- turn the `tracing-subscriber.default-features` to `true`
- edit their wanted project to have colors
I decided to explicitly disable ansi colors in case we would have in
future a dependency accidentally enabling the feature on
`tracing-subscriber`, which would be quite surprising but not
unimagineable.
By getting rid of `atty` from dependencies we get rid of
<https://github.com/advisories/GHSA-g98v-hv3f-hcfr>.
## Problem
All tests have already been parametrised by Postgres version and build
type (to have them distinguishable in the Allure report), but despite
it, it's anyway required to have DEFAULT_PG_VERSION and BUILD_TYPE env
vars set to corresponding values, for example to
run`test_timeline_deletion_with_files_stuck_in_upload_queue[release-pg14-local_fs]`
test it's required to set `DEFAULT_PG_VERSION=14` and
`BUILD_TYPE=release`.
This PR makes the test framework pick up parameters from the test name
itself.
## Summary of changes
- Postgres version and build type related fixtures now are
function-scoped (instead of being sessions scoped before)
- Deprecate `--pg-version` argument in favour of DEFAULT_PG_VERSION env
variable (it's easier to parse)
- GitHub autocomment now includes only one command with all the failed
tests + runs them in parallel
## Problem
#4528
## Summary of changes
Add a 60 seconds default timeout to the reqwest client
Add retries for up to 3 times to call into the metric consumption
endpoint
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Prod logs have deep accidential span nesting. Introduced in #3759 and
has been untouched since, maybe no one watches proxy logs? :) I found it
by accident when looking to see if proxy logs have ansi colors with
`{neon_service="proxy"}`.
The solution is to mostly stop using `Span::enter` or `Span::entered` in
async code. Kept on `Span::entered` in cancel on shutdown related path.
