I would love to not expose the in-accurate value int he mgmt API at all,
and in fact control plane doesn't use it [^1].
But our tests do, and I have no desire to change them at this time.
[^1]: https://github.com/neondatabase/cloud/pull/8317
... by panicking on overflow;
It was made fallible initially due to in-confidence in logical size
calculation. However, the error has never happened since I am at Neon.
Let's stop worrying about this by converting the overflow check into a panic.
If `index_part.json` is (verifiably) not present on remote storage, we
should regard the timeline as inexistent. This lets `clean_up_timelines`
purge the partial local disk state, which is important in the case of
incomplete creations leaving behind state that hinders retries. For
incomplete deletions, we also want the timeline's local disk content be
gone completely.
The PR removes the allowed warnings added by #5390 and #5912, as we now
are only supposed to issue info level messages. It also adds a
reproducer for #6007, by parametrizing the
`test_timeline_init_break_before_checkpoint_recreate` test added by
#5390. If one reverts the .rs changes, the "cannot create its uninit
mark file" log line occurs once one comments out the failing checks for
the local disk state being actually empty.
Closes#6007
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
This PR adds an `existing_initdb_timeline_id` option to timeline
creation APIs, taking an optional timeline ID.
Follow-up of #5390.
If the `existing_initdb_timeline_id` option is specified via the HTTP
API, the pageserver downloads the existing initdb archive from the given
timeline ID and extracts it, instead of running initdb itself.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
- During migration of tenants, it is useful for callers to
`/location_conf` to flush a tenant's layers while transitioning to
AttachedStale: this optimization reduces the redundant WAL replay work
that the tenant's new attached pageserver will have to do. Test coverage
for this will come as part of the larger tests for live migration in
#5745#5842
- Flushing is controlled with `flush_ms` query parameter: it is the
caller's job to decide how long they want to wait for a flush to
complete. If flush is not complete within the time limit, the pageserver
proceeds to succeed anyway: flushing is only an optimization.
- Add swagger definitions for all this: the location_config API is the
primary interface for driving tenant migration as described in
docs/rfcs/028-pageserver-migration.md, and will eventually replace the
various /attach /detach /load /ignore APIs.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Remove handcrafted TenantConf deserialization code. Use
`serde_path_to_error` to include the field which failed parsing. Leaves
the duplicated TenantConf in pageserver and models, does not touch
PageserverConf handcrafted deserialization.
Error change:
- before change: "configure option `checkpoint_distance` cannot be
negative"
- after change: "`checkpoint_distance`: invalid value: integer `-1`,
expected u64"
Fixes: #5300
Cc: #3682
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Co-authored-by: Shany Pozin <shany@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
(includes two preparatory commits from
https://github.com/neondatabase/neon/pull/5960)
## Problem
To accommodate multiple shards in the same tenant on the same
pageserver, we must include the full TenantShardId in local paths. That
means that all code touching local storage needs to see the
TenantShardId.
## Summary of changes
- Replace `tenant_id: TenantId` with `tenant_shard_id: TenantShardId` on
Tenant, Timeline and RemoteTimelineClient.
- Use TenantShardId in helpers for building local paths.
- Update all the relevant call sites.
This doesn't update absolutely everything: things like PageCache,
TaskMgr, WalRedo are still shard-naive. The purpose of this PR is to
update the core types so that others code can be added/updated
incrementally without churning the most central shared types.
Precursor for https://github.com/neondatabase/neon/pull/5957
## Problem
When DeletionList was written, TenantId/TimelineId didn't have
human-friendly modes in their serde. #5335 added those, such that the
helpers used in serialization of HashMaps are no longer necessary.
## Summary of changes
- Add a unit test to ensure that this change isn't changing anything
about the serialized form
- Remove the serialization helpers for maps of Id
## Problem
This is a narrow race that can leave a stuck Stopping tenant behind,
while emitting a log error "Missing InProgress marker during tenant
upsert, this is a bug"
- Deletion request 1 puts tenant into Stopping state, and fires off
background part of DeleteTenantFlow
- Deletion request 2 acquires a SlotGuard for the same tenant ID, leaves
a TenantSlot::InProgress in place while it checks if the tenant's state
is accept able.
- DeleteTenantFlow finishes, calls TenantsMap::remove, which removes the
InProgress marker.
- Deletion request 2 calls SlotGuard::revert, which upserts the old
value (the Tenant in Stopping state), and emits the telltale log
message.
Closes: #5936
## Summary of changes
- Add a regression test which uses pausable failpoints to reproduce this
scenario.
- TenantsMap::remove is only called by DeleteTenantFlow. Its behavior is
tweaked to express the different possible states, especially
`InProgress` which carriers a barrier.
- In DeleteTenantFlow, if we see such a barrier result from remove(),
wait for the barrier and then try removing again.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Quest: https://github.com/neondatabase/neon/issues/4745. Follow-up to
#4938.
- add in locks for compaction and gc, so we don't have multiple
executions at the same time in tests
- remove layer_removal_cs
- remove waiting for uploads in eviction/gc/compaction
- #4938 will keep the file resident until upload completes
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The TenantShardId in API URLs is sufficient to uniquely identify a
tenant shard, but not for it to function: it also needs to know its full
sharding configuration (stripe size, layout version) in order to map
keys to shards.
## Summary of changes
- Introduce ShardIdentity: this is the superset of ShardIndex (#5924 )
that is required for translating keys to shard numbers.
- Include ShardIdentity as an optional attribute of LocationConf
- Extend the public `LocationConfig` API structure with a flat
representation of shard attributes.
The net result is that at the point we construct a `Tenant`, we have a
`ShardIdentity` (inside LocationConf). This enables the next steps to
actually use the ShardIdentity to split WAL and validate that page
service requires are reaching the correct shard.
## Problem
For sharded tenants, the layer keys must include the shard number and
shard count, to disambiguate keys written by different shards in the
same tenant (shard number), and disambiguate layers written before and
after splits (shard count).
Closes: https://github.com/neondatabase/neon/issues/5924
## Summary of changes
There are no functional changes in this PR: everything behaves the same
for the default ShardIndex::unsharded() value. Actual construct of
sharded tenants will come next.
- Add a ShardIndex type: this is just a wrapper for a ShardCount and
ShardNumber. This is a subset of ShardIdentity: whereas ShardIdentity
contains enough information to filter page keys, ShardIndex contains
just enough information to construct a remote key. ShardIndex has a
compact encoding, the same as the shard part of TenantShardId.
- Store the ShardIndex as part of IndexLayerMetadata, if it is set to a
different value than ShardIndex::unsharded.
- Update RemoteTimelineClient and DeletionQueue to construct paths using
the layer metadata. Deletion code paths that previously just passed a
`Generation` now pass a full `LayerFileMetadata` to capture the shard as
well.
Notes to reviewers:
- In deletion code paths, I could have used a (Generation, ShardIndex)
instead of the full LayerFileMetadata. I opted for the full object
partly for brevity, and partly because in future when we add checksums
the deletion code really will care about the full metadata in order to
validate that it is deleting what was intended.
- While ShardIdentity and TenantShardId could both use a ShardIndex, I
find that they read more cleanly as "flat" structs that spell out the
shard count and number field separately. Serialization code would need
writing out by hand anyway, because TenantShardId's serialized form is
not a serde struct-style serialization.
- ShardIndex doesn't _have_ to exist (we could use ShardIdentity
everywhere), but it is a worthwhile optimization, as we will have many
copies of this as part of layer metadata. In future the size difference
betweedn ShardIndex and ShardIdentity may become larger if we implement
more sophisticated key distribution mechanisms (i.e. new values of
ShardIdentity::layout).
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Historically, we treated the presence of a timeline on local disk as
evidence that it logically exists. Since #5580 that is no longer the
case, so we can always rely on remote storage. If we restart and the
timeline is gone in remote storage, we will also purge it from local
disk: no need for a marker.
Reference on why this PR is for timeline markers and not tenant markers:
https://github.com/neondatabase/neon/issues/5080#issuecomment-1783187807
## Summary of changes
Remove code paths that read + write deletion marker for timelines.
Leave code path that deletes these markers, just in case we deploy while
there are some in existence. This can be cleaned up later.
(https://github.com/neondatabase/neon/issues/5718)
Fix the fallible vs. infallible check order with
`UninitTimeline::finish_creation` so that the incomplete timeline can be
removed. Currently the order of drop guard unwrapping causes uninit
files to be left on pageserver, blocking the tenant deletion.
Cc: #5914
Cc: #investigation-2023-11-23-stuck-tenant-deletion
## Problem
See #2592
## Summary of changes
Compresses the results of initdb into a .tar.zst file and uploads them
to S3, to enable usage in recovery from lsn.
Generations should not be involved I think because we do this only once
at the very beginning of a timeline.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
#5900
## Summary of changes
Added cancellation token as param in all relevant code paths and actually used it in the find_lsn_for_timestamp main loop
fixes https://github.com/neondatabase/neon/issues/5878
obsoletes https://github.com/neondatabase/neon/issues/5879
Before this PR, it could happen that `load_layer_map` schedules removal
of the future
image layer. Then a later compaction run could re-create the same image
layer, scheduling a PUT.
Due to lack of an upload queue barrier, the PUT and DELETE could be
re-ordered.
The result was IndexPart referencing a non-existent object.
## Summary of changes
* Add support to `pagectl` / Python tests to decode `IndexPart`
* Rust
* new `pagectl` Subcommand
* `IndexPart::{from,to}_s3_bytes()` methods to internalize knowledge
about encoding of `IndexPart`
* Python
* new `NeonCli` subclass
* Add regression test
* Rust
* Ability to force repartitioning; required to ensure image layer
creation at last_record_lsn
* Python
* The regression test.
* Fix the issue
* Insert an `UploadOp::Barrier` after scheduling the deletions.
(part of the getpage benchmarking epic #5771)
The plan is to make the benchmarking tool log on stderr and emit results
as JSON on stdout. That way, the test suite can simply take captures
stdout and json.loads() it, while interactive users of the benchmarking
tool have a reasonable experience as well.
Existing logging users continue to print to stdout, so, this change
should be a no-op functionally and performance-wise.
While reviewing code noticed a scary `layer_paths.pop().unwrap()` then
realized this should be further asyncified, something I forgot to do
when I switched the `compact_level0_phase1` back to async in #4938.
This keeps the double-fsync for new deltas as #4749 is still unsolved.
A very low number of layer loads have been marked wrongly as permanent,
as I did not remember that `VirtualFile::open` or reading could fail
transiently for contention. Return separate errors for transient and
persistent errors from `{Delta,Image}LayerInner::load`.
Includes drive-by comment changes.
The implementation looks quite ugly because having the same type be both
the inner (operation error) and outer (critical error), but with the
alternatives I tried I did not find a better way.
The longer a pageserver runs, the more walredo processes it accumulates
from tenants that are touched intermittently (e.g. by availability
checks). This can lead to getting OOM killed.
Changes:
- Add an Instant recording the last use of the walredo process for a
tenant
- After compaction iteration in the background task, check for idleness
and stop the walredo process if idle for more than 10x compaction
period.
Cc: #3620
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Shany Pozin <shany@neon.tech>
First compaction/gc error backoff starts from 0 which is less than 2s
what it was before #5672. This is now fixed to be the intended 2**n.
Additionally noticed the `compaction_iteration` creating an
`anyhow::Error` via `into()` always captures a stacktrace even if we had
a stacktraceful anyhow error within the CompactionError because there is
no stable api for querying that.
## Problem
When using TenantId as the key, we are unable to handle multiple tenant
shards attached to the same pageserver for the same tenant ID. This is
an expected scenario if we have e.g. 8 shards and 5 pageservers.
## Summary of changes
- TenantsMap is now a BTreeMap instead of a HashMap: this enables
looking up by range. In future, we will need this for page_service, as
incoming requests will just specify the Key, and we'll have to figure
out which shard to route it to.
- A new key type TenantShardId is introduced, to act as the key in
TenantsMap, and as the id type in external APIs. Its human readable
serialization is backward compatible with TenantId, and also
forward-compatible as long as sharding is not actually used (when we
construct a TenantShardId with ShardCount(0), it serializes to an
old-fashioned TenantId).
- Essential tenant APIs are updated to accept TenantShardIds:
tenant/timeline create, tenant delete, and /location_conf. These are the
APIs that will enable driving sharded tenants. Other apis like /attach
/detach /load /ignore will not work with sharding: those will soon be
deprecated and replaced with /location_conf as part of the live
migration work.
Closes: #5787
- trivial serialization roundtrip test for
`pageserver::repository::Value`
- add missing `start_paused = true` to 15s test making it <0s test
- completely unrelated future clippy lint avoidance (helps beta channel
users)
## Problem
This is a log hygiene fix, for an occasional test failure.
warn-level logging in imitate_timeline_cached_layer_accesses can't
distinguish actual errors from shutdown cases.
## Summary of changes
Replaced anyhow::Error with an explicit CollectKeySpaceError type, that
includes conversion from PageReconstructError::Cancelled.
In OOM situations, knowing exactly how many walredo processes there were
at a time would help afterwards to understand why was pageserver OOM
killed. Add `pageserver_wal_redo_process_total` metric to keep track of
total wal redo process started, shutdown and killed since pageserver
start.
Closes#5722
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <me@cschwarz.com>
Includes the changes of #3689 that address point 1 of #3689, plus some
further improvements. In particular, this PR does:
* set `min_lsn` to a safe value to create branches from (and verify it
in tests)
* return `min_lsn` instead of `max_lsn` for `NoData` and `Past` (verify
it in test for `Past`, `NoData` is harder and not as important)
* return `commit_lsn` instead of `max_lsn` for Future (and verify it in
the tests)
* add some comments
Split out of #5686 to get something more minimal out to users.
Minor bugfix, something noticed while manual code-review. Use the same
joinset for inprogress tenants so we can get the benefit of the
buffering logging just as we get for attached tenants, and no single
inprogress task can hold up shutdown of other tenants.
The `get_timestamp_of_lsn` pageserver endpoint has been added in #5497,
but the yml it added was wrong: the lsn is expected in hex format, not
in integer (decimal) format.
## Problem
We have observed the shutdown of a timeline taking a long time when a
deletion arrives at a busy time for the system. This suggests that we
are not respecting cancellation tokens promptly enough.
## Summary of changes
- Refactor timeline shutdown so that rather than having a shutdown()
function that takes a flag for optionally flushing, there are two
distinct functions, one for graceful flushing shutdown, and another that
does the "normal" shutdown where we're just setting a cancellation token
and then tearing down as fast as we can. This makes things a bit easier
to reason about, and enables us to remove the hand-written variant of
shutdown that was maintained in `delete.rs`
- Layer flush task checks cancellation token more carefully
- Logical size calculation's handling of cancellation tokens is
simplified: rather than passing one in, it respects the Timeline's
cancellation token.
This PR doesn't touch RemoteTimelineClient, which will be a key thing to
fix as well, so that a slow remote storage op doesn't hold up shutdown.
## Problem
We have a funny 3-day timeout for connections between the compute and
pageserver. We want to get rid of it, so to do that we need to make sure
the compute is resilient to connection failures.
Closes: https://github.com/neondatabase/neon/issues/5518
## Summary of changes
This test makes the pageserver randomly drop the connection if the
failpoint is enabled, and ensures we can keep querying the pageserver.
This PR also reduces the default timeout to 10 minutes from 3 days.
* lower level on auth success from info to debug (fixes#5820)
* don't log stacktraces on auth errors (as requested on slack). we do this by introducing an `AuthError` type instead of using `anyhow` and `bail`.
* return errors that have been censored for improved security.
## Problem
#5711 and #5367 raced -- the `SlotGuard` type needs `Gate` to properly
enforce its invariant that we may not drop an `Arc<Tenant>` from a slot.
## Summary of changes
Replace the TODO with the intended check of Gate.
## Problem
- Close#5784
## Summary of changes
- Update the `GetActiveTenantError` -> `QueryError` conversion process
in `pageserver/src/page_service.rs`
- Update the pytest logging exceptions in
`./test_runner/regress/test_tenant_detach.py`
