Setup pgaudit and pgauditlogtofile extensions
in compute_ctl when the ComputeAuditLogLevel is
set to 'hipaa'.
See cloud PR https://github.com/neondatabase/cloud/pull/24568
Add rsyslog setup for compute_ctl.
Spin up a rsyslog server in the compute VM,
and configure it to send logs to the endpoint
specified in AUDIT_LOGGING_ENDPOINT env.
The compute should only act if requests come from the control plane.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
On macOS, the `unused` lint complains about two variables not used in
`!linux` builds.
These were introduced in #11007.
## Summary of changes
Appease the linter by explicitly using the variables in `!linux`
branches.
## Problem
Preparation for https://github.com/neondatabase/neon/issues/10851
## Summary of changes
Add walproposer `safekeepers_generations` field which can be set by
prefixing `neon.safekeepers` GUC with `g#n:`. Non zero value (n) forces
walproposer to use generations. In particular, this also disables
implicit timeline creation as timeline will be created by storcon. Add
test checking this. Also add missing infra: `--safekeepers-generation`
flag to neon_local endpoint start + fix `--start-timeout` flag: it
existed but value wasn't used.
To speed up compute startup. Resizing swap in particular takes about 100
ms on my laptop. By performing it in parallel with downloading the
basebackup, that latency is effectively hidden. I would imagine that
downloading remote extensions can also take a non-trivial amount of
time, although I didn't try to measure that. In any case that's now also
performed in parallel with downloading the basebackup.
Move most of the code to compute.rs, so that all the major startup steps
are visible in one place. You can now get a pretty good picture of what
happens in the latency-critical path at compute startup by reading
ComputeNode::start_compute().
This also clarifies the error handling in start_compute. Previously, the
start_postgres function sometimes returned an Err, and sometimes Ok but
with the compute status already set to Failed. Now the start_compute
function always returns Err on failure, and it's the caller's
responsibility to change the compute status to Failed. Separately from
that, it returns a handle to the Postgres process via a `&mut` reference
if it had already started Postgres (i.e. on success, or if the failure
happens after launching the Postgres process).
---------
Co-authored-by: Alexey Kondratov <kondratov.aleksey@gmail.com>
The comment was woefully outdated and outright wrong. It applied a long
time ago (before commit e5cc2f92c4 to be precise), but nowadays the
function just launches postgres and waits until it starts accepting
connections. The other things the comment talked about are done in other
functions.
We lost this with the switch to axum for the HTTP server. Add it back.
In addition to just resurrecting the functionality we had before, pass
the tracing context of the /configure HTTP request to the start_postgres
operation that runs in the main thread. This way, the 'start_postgres'
and all its sub-spans like getting the basebackup become children of the
HTTP request span. This allows end-to-end tracing of a compute start,
all the way from the proxy to the SQL queries executed by compute_ctl as
part of compute startup.
Updates `compute_tools` and `compute_api` crates to edition 2024. We
like to stay on the latest edition if possible. There is no functional
changes, however some code changes had to be done to accommodate the
edition's breaking changes.
The PR has three commits:
* the first commit updates the named crates to edition 2024 and appeases
`cargo clippy` by changing code.
* the second commit performs a `cargo fmt` that does some minor changes
(not many)
* the third commit performs a cargo fmt with nightly options to reorder
imports as a one-time thing. it's completely optional, but I offer it
here for the compute team to review it.
I'd like to hear opinions about the third commit, if it's wanted and
felt worth the diff or not. I think most attention should be put onto
the first commit.
Part of #10918
In local dev environment, these steps take around 100 ms, and they are
in the critical path of a compute startup on a compute pool hit. I don't
know if it's like that in production, but as first step, add tracing
spans to the functions so that they can be measured more easily.
## Problem
After refactoring the configuration code to phases, it became a bit
fuzzy who filters out DBs that are not present in Postgres, are invalid,
or have `datallowconn = false`. The first 2 are important for the DB
dropping case, as we could be in operation retry, so DB could be already
absent in Postgres or invalid (interrupted `DROP DATABASE`).
Recent case:
https://neondb.slack.com/archives/C03H1K0PGKH/p1740053359712419
## Summary of changes
Add a common code that filters out inaccessible DBs inside
`ApplySpecPhase::RunInEachDatabase`.
ALTER SUBSCRIPTION requires AccessExclusive lock
which conflicts with iteration over pg_subscription when multiple
databases are present
and operations are applied concurrently.
Fix by explicitly locking pg_subscription
in the beginning of the transaction in each database.
## Problem
https://github.com/neondatabase/cloud/issues/24292
This replaces the use of the awscli utility. awscli binary is massive,
it added about 200 MB to the docker image size, while the s3 client was
already a dependency so using that is essentially free, as far as binary
size is concerned.
I implemented a simple upload function that tries to keep 10 uploads
going in parallel. I believe that's the default behavior of the "aws s3
sync" command too.
In commit 9537829ccd I made shared_buffers be derived from the system's
available RAM. However, I failed to remove the old hard-coded
shared_buffers=10GB settings, shared_buffers was set twice. Oopsie.
There is now a compute_ctl_config field in the response that currently
only contains a JSON Web Key set. compute_ctl currently doesn't do
anything with the keys, but will in the future.
The reasoning for the new field is due to the nature of empty computes.
When an empty compute is created, it does not have a tenant. A compute
spec is the primary means of communicating the details of an attached
tenant. In the empty compute state, there is no spec. Instead we wait
for the control plane to pass us one via /configure. If we were to
include the jwks field in the compute spec, we would have a partial
compute spec, which doesn't logically make sense.
Instead, we can have two means of passing settings to the compute:
- spec: tenant specific config details
- compute_ctl_config: compute specific settings
For instance, the JSON Web Key set passed to the compute is independent
of any tenant. It is a setting of the compute whether it is attached or
not.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We respect `skip_pg_catalog_updates` at the initial start, but ignore at
the follow-up `/configure`. Yet, it's used for storage->cplane->compute
notify requests after migrations, shard split, etc. So every time we get
them, applying the new config takes much longer than it should because
we go through Postgres catalog checks. Cplane sets this flag, when it
does serves notify attach call
9068c7d743
Related to `inc-403`, for example
## Summary of changes
Look at `skip_pg_catalog_updates` in `compute.reconfigure()`
The old values assumed that you have at least about 18 GB of RAM
available (shared_buffers=10GB and maintenance_work_mem=8GB). That's a
lot when testing locally. Make it configurable, and make the default
assumption much smaller: 256 MB.
This is nice for local testing, but it's also in preparation for
starting to use VMs to run these jobs. When launched in a VM, the
control plane can set these env variables according to the max size of
the VM.
Also change the formula for how RAM is distributed: use 10% of RAM for
shared_buffers, and 70% for maintenance_work_mem. That leaves a good
amount for misc. other stuff and the OS. A very large shared_buffers
setting won't typically help with bulk loading. It won't help with the
network and I/O of processing all the tables, unless maybe if the whole
database fits in shared buffers, but even then it's not much faster than
using local disk. Bulk loading is all sequential I/O. It also won't help
much with index creation, which is also sequential I/O. A large
maintenance_work_mem can be quite useful, however, so that's where we
put most of the RAM.
Avoids compiling the crate and its dependencies into binaries that don't
need them. Shrinks the compute_ctl binary from about 31MB to 28MB in the
release-line-debug-size-lto profile.
The compute_ctl HTTP server has the following purposes:
- Allow management via the control plane
- Provide an endpoint for scaping metrics
- Provide APIs for compute internal clients
- Neon Postgres extension for installing remote extensions
- local_proxy for installing extensions and adding grants
The first two purposes require the HTTP server to be available outside
the compute.
The Neon threat model is a bad actor within our internal network. We
need to reduce the surface area of attack. By exposing unnecessary
unauthenticated HTTP endpoints to the internal network, we increase the
surface area of attack. For endpoints described in the third bullet
point, we can just run an extra HTTP server, which is only bound to the
loopback interface since all consumers of those endpoints are within the
compute.
## Problem
/database_schema endpoint returns incomplete output from `pg_dump`
## Summary of changes
The Tokio process was not used properly. The returned stream does not
include `process::Child`, and the process is scheduled to be killed
immediately after the `get_database_schema` call when `cmd` goes out of
scope.
The solution in this PR is to return a special Stream implementation
that retains `process::Child`.
compute_ctl is mostly written in synchronous fashion, intended to run in
a single thread. However various parts had become async, and they
launched their own tokio runtimes to run the async code. For example, VM
monitor ran in its own multi-threaded runtime, and apply_spec_sql()
launched another multi-threaded runtime to run the per-database SQL
commands in parallel. In addition to that, a few places used a
current-thread runtime to run async code in the main thread, or launched
a current-thread runtime in a *different* thread to run background
tasks.
Unify the runtimes so that there is only one tokio runtime. It's created
very early at process startup, and the main thread "enters" the runtime,
so that it's always available for tokio::spawn() and runtime.block_on()
calls. All code that needs to run async code uses the same runtime.
The main thread still mostly runs in a synchronous fashion. When it
needs to run async code, it uses rt.block_on().
Spawn fewer additional threads, prefer to spawn tokio tasks instead.
Convert some code that ran synchronously in background threads into
async. I didn't go all the way, though, some background threads are
still spawned.
The compute_id will be used when verifying claims sent by the control
plane.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Signed-off-by: Tristan Partin <tristan@neon.tech>
The primary benefit is that all the ad hoc get_matches() calls are no
longer necessary. Now all it takes to get at the CLI arguments is
referencing a struct member. It's also great the we can replace the ad
hoc CLI struct we had with this more formal solution.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
In some cases, we were returning a very shallow error like `error
sending request for url (XXX)`, which made it very hard to figure out
the actual error.
## Summary of changes
Use `{:?}` in a few places, and remove it from places where we were
printing a string anyway.
## Problem
1. d04d924 added separate metrics for total requests and failures
separately, but it doesn't make much sense. We could just have a unified
counter with `http_status`.
2. `test_compute_migrations_retry` had a race, i.e., it was waiting for
the last successful migration, not an actual failure. This was revealed
after adding an assert on failure metric in d04d924.
## Summary of changes
1. Switch to unified counters for `compute_ctl` requests.
2. Add a waiting loop into `test_compute_migrations_retry` to eliminate
the race.
Part of neondatabase/cloud#17590
## Problem
There are several parts of `compute_ctl` with a very low visibility of
errors:
1. DB migrations that run async in the background after compute start.
2. Requests made to control plane (currently only `GetSpec`).
3. Requests made to the remote extensions server.
## Summary of changes
Add new counters to quickly evaluate the amount of errors among the
fleet.
Part of neondatabase/cloud#17590
Only a few things that needed updating:
- async_trait was removed
- Message::Text takes a Utf8Bytes object instead of a String
Signed-off-by: Tristan Partin <tristan@neon.tech>
Co-authored-by: Conrad Ludgate <connor@neon.tech>
Drop logical replication subscribers
before compute starts on a non-main branch.
Add new compute_ctl spec flag: drop_subscriptions_before_start
If it is set, drop all the subscriptions from the compute node
before it starts.
To avoid race on compute start, use new GUC
neon.disable_logical_replication_subscribers
to temporarily disable logical replication workers until we drop the
subscriptions.
Ensure that we drop subscriptions exactly once when endpoint starts on a
new branch.
It is essential, because otherwise, we may drop not only inherited, but
newly created subscriptions.
We cannot rely only on spec.drop_subscriptions_before_start flag,
because if for some reason compute restarts inside VM,
it will start again with the same spec and flag value.
To handle this, we save the fact of the operation in the database
in the neon.drop_subscriptions_done table.
If the table does not exist, we assume that the operation was never
performed, so we must do it.
If table exists, we check if the operation was performed on the current
timeline.
fixes: https://github.com/neondatabase/neon/issues/8790
We did not have any tests on fast_import binary yet.
In this PR I have introduced:
- `FastImport` class and tools for testing in python
- basic test that runs fast import against vanilla postgres and checks
that data is there
Should be merged after https://github.com/neondatabase/neon/pull/10251
Instead of generating our own request ID, we can just use the one
provided by the control plane. In the event, we get a request from a
client which doesn't set X-Request-ID, then we just generate one which
is useful for tracing purposes.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
`postgres` is system database at neon, so we need to do `pg_restore`
into `neondb` instead
https://github.com/neondatabase/cloud/issues/22100
## Summary of changes
Changed fast_import a little bit:
1. After succesfull connection creating `neondb` in postgres instance
2. Changed restore connstring to use new db
3. Added optional `source_connection_string`, which allows to skip
`s3_prefix` and just connect directly.
4. Added `-i` that stops process until sigterm
## TODO
- [x] test image in cplane e2e
- [ ] Change import job image back to latest after this merged (partial
revert of https://github.com/neondatabase/cloud/pull/22338)
This is a refactor to create better abstractions related to our
management server. It cleans up the code, and prepares everything for
authorized communication to and from the control plane.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
In Postgres, one cannot drop a role if it has any dependent objects in
the DB. In `compute_ctl`, we automatically reassign all dependent
objects in every DB to the corresponding DB owner. Yet, it seems that it
doesn't help with some implicit permissions. The issue is reproduced by
installing a `postgis` extension because it creates some views and
tables in the public schema.
## Summary of changes
Added a repro test without using a `postgis`: i) create a role via
`compute_ctl` (with `neon_superuser` grant); ii) create a test role, a
table in schema public, and grant permissions via the role in
`neon_superuser`.
To fix the issue, I added a new `compute_ctl` code that removes such
dangling permissions before dropping the role. It's done in the least
invasive way, i.e., only touches the schema public, because i) that's
the problem we had with PostGIS; ii) it creates a smaller chance of
messing anything up and getting a stuck operation again, just for a
different reason.
Properly, any API-based catalog operations should fail gracefully and
provide an actionable error and status code to the control plane,
allowing the latter to unwind the operation and propagate an error
message and hint to the user. In this sense, it's aligned with another
feature request https://github.com/neondatabase/cloud/issues/21611Resolveneondatabase/cloud#13582
## Problem
Project gets stuck if database with subscriptions was deleted via API /
UI.
https://github.com/neondatabase/cloud/issues/18646
## Summary of changes
Before dropping the database, drop all the subscriptions in it.
Do not drop slot on publisher, because we have no guarantee that the
slot still exists or that the publisher is reachable.
Add `DropSubscriptionsForDeletedDatabases` phase to run these operations
in all databases, we're about to delete.
Ignore the error if the database does not exist.
## Problem
On macOS:
```
error: unused variable: `disable_lfc_resizing`
--> compute_tools/src/bin/compute_ctl.rs:431:9
|
431 | disable_lfc_resizing,
| ^^^^^^^^^^^^^^^^^^^^ help: try ignoring the field: `disable_lfc_resizing: _`
|
= note: `-D unused-variables` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_variables)]`
```
## Summary of changes
- Initialise `disable_lfc_resizing` only on Linux (because it's used on
Linux only in further bloc)
There was no value in saving them off to temporary variables.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Signed-off-by: Tristan Partin <tristan@neon.tech>
