WIP

.cargo/config.toml

@@ -1,17 +0,0 @@
-# The binaries are really slow, if you compile them in 'dev' mode with the defaults.
-# Enable some optimizations even in 'dev' mode, to make tests faster. The basic
-# optimizations enabled by "opt-level=1" don't affect debuggability too much.
-#
-# See https://www.reddit.com/r/rust/comments/gvrgca/this_is_a_neat_trick_for_getting_good_runtime/
-#
-[profile.dev.package."*"]
-# Set the default for dependencies in Development mode.
-opt-level = 3
-
-[profile.dev]
-# Turn on a small amount of optimization in Development mode.
-opt-level = 1
-
-[alias]
-build_testing = ["build", "--features", "testing"]
-neon = ["run", "--bin", "neon_local"]

.circleci/config.yml

@@ -0,0 +1,723 @@
+version: 2.1
+
+executors:
+  zenith-build-executor:
+    resource_class: xlarge
+    docker:
+      - image: cimg/rust:1.56.1
+  zenith-python-executor:
+    docker:
+      - image: cimg/python:3.7.10  # Oldest available 3.7 with Ubuntu 20.04 (for GLIBC and Rust) at CirlceCI
+
+jobs:
+  check-codestyle-rust:
+    executor: zenith-build-executor
+    steps:
+      - checkout
+      - run:
+          name: rustfmt
+          when: always
+          command: |
+            cargo fmt --all -- --check
+
+  # A job to build postgres
+  build-postgres:
+    executor: zenith-build-executor
+    parameters:
+      build_type:
+        type: enum
+        enum: ["debug", "release"]
+    environment:
+      BUILD_TYPE: << parameters.build_type >>
+    steps:
+        # Checkout the git repo (circleci doesn't have a flag to enable submodules here)
+      - checkout
+
+        # Grab the postgres git revision to build a cache key.
+        # Note this works even though the submodule hasn't been checkout out yet.
+      - run:
+          name: Get postgres cache key
+          command: |
+            git rev-parse HEAD:vendor/postgres > /tmp/cache-key-postgres
+
+      - restore_cache:
+          name: Restore postgres cache
+          keys:
+            # Restore ONLY if the rev key matches exactly
+            - v04-postgres-cache-<< parameters.build_type >>-{{ checksum "/tmp/cache-key-postgres" }}
+
+        # FIXME We could cache our own docker container, instead of installing packages every time.
+      - run:
+          name: apt install dependencies
+          command: |
+            if [ ! -e tmp_install/bin/postgres ]; then
+              sudo apt update
+              sudo apt install build-essential libreadline-dev zlib1g-dev flex bison libseccomp-dev
+            fi
+
+        # Build postgres if the restore_cache didn't find a build.
+        # `make` can't figure out whether the cache is valid, since
+        # it only compares file timestamps.
+      - run:
+          name: build postgres
+          command: |
+            if [ ! -e tmp_install/bin/postgres ]; then
+              # "depth 1" saves some time by not cloning the whole repo
+              git submodule update --init --depth 1
+              make postgres -j8
+            fi
+
+      - save_cache:
+          name: Save postgres cache
+          key: v04-postgres-cache-<< parameters.build_type >>-{{ checksum "/tmp/cache-key-postgres" }}
+          paths:
+            - tmp_install
+
+  # A job to build zenith rust code
+  build-zenith:
+    executor: zenith-build-executor
+    parameters:
+      build_type:
+        type: enum
+        enum: ["debug", "release"]
+    environment:
+      BUILD_TYPE: << parameters.build_type >>
+    steps:
+      - run:
+          name: apt install dependencies
+          command: |
+            sudo apt update
+            sudo apt install libssl-dev clang
+
+        # Checkout the git repo (without submodules)
+      - checkout
+
+        # Grab the postgres git revision to build a cache key.
+        # Note this works even though the submodule hasn't been checkout out yet.
+      - run:
+          name: Get postgres cache key
+          command: |
+            git rev-parse HEAD:vendor/postgres > /tmp/cache-key-postgres
+
+      - restore_cache:
+          name: Restore postgres cache
+          keys:
+            # Restore ONLY if the rev key matches exactly
+            - v04-postgres-cache-<< parameters.build_type >>-{{ checksum "/tmp/cache-key-postgres" }}
+
+      - restore_cache:
+          name: Restore rust cache
+          keys:
+            # Require an exact match. While an out of date cache might speed up the build,
+            # there's no way to clean out old packages, so the cache grows every time something
+            # changes.
+            - v04-rust-cache-deps-<< parameters.build_type >>-{{ checksum "Cargo.lock" }}
+
+        # Build the rust code, including test binaries
+      - run:
+          name: Rust build << parameters.build_type >>
+          command: |
+            if [[ $BUILD_TYPE == "debug" ]]; then
+              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
+              CARGO_FLAGS=
+            elif [[ $BUILD_TYPE == "release" ]]; then
+              cov_prefix=()
+              CARGO_FLAGS=--release
+            fi
+
+            export CARGO_INCREMENTAL=0
+            "${cov_prefix[@]}" cargo build $CARGO_FLAGS --bins --tests
+
+      - save_cache:
+          name: Save rust cache
+          key: v04-rust-cache-deps-<< parameters.build_type >>-{{ checksum "Cargo.lock" }}
+          paths:
+            - ~/.cargo/registry
+            - ~/.cargo/git
+            - target
+
+        # Run style checks
+        # has to run separately from cargo fmt section
+        # since needs to run with dependencies
+      - run:
+          name: cargo clippy
+          command: |
+            if [[ $BUILD_TYPE == "debug" ]]; then
+              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
+            elif [[ $BUILD_TYPE == "release" ]]; then
+              cov_prefix=()
+            fi
+
+            "${cov_prefix[@]}" ./run_clippy.sh
+
+        # Run rust unit tests
+      - run:
+          name: cargo test
+          command: |
+            if [[ $BUILD_TYPE == "debug" ]]; then
+              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
+            elif [[ $BUILD_TYPE == "release" ]]; then
+              cov_prefix=()
+            fi
+
+            "${cov_prefix[@]}" cargo test
+
+        # Install the rust binaries, for use by test jobs
+      - run:
+          name: Install rust binaries
+          command: |
+            if [[ $BUILD_TYPE == "debug" ]]; then
+              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
+            elif [[ $BUILD_TYPE == "release" ]]; then
+              cov_prefix=()
+            fi
+
+            binaries=$(
+              "${cov_prefix[@]}" cargo metadata --format-version=1 --no-deps |
+              jq -r '.packages[].targets[] | select(.kind | index("bin")) | .name'
+            )
+
+            test_exe_paths=$(
+              "${cov_prefix[@]}" cargo test --message-format=json --no-run |
+              jq -r '.executable | select(. != null)'
+            )
+
+            mkdir -p /tmp/zenith/bin
+            mkdir -p /tmp/zenith/test_bin
+            mkdir -p /tmp/zenith/etc
+
+            # Install target binaries
+            for bin in $binaries; do
+              SRC=target/$BUILD_TYPE/$bin
+              DST=/tmp/zenith/bin/$bin
+              cp $SRC $DST
+              echo $DST >> /tmp/zenith/etc/binaries.list
+            done
+
+            # Install test executables (for code coverage)
+            if [[ $BUILD_TYPE == "debug" ]]; then
+              for bin in $test_exe_paths; do
+                SRC=$bin
+                DST=/tmp/zenith/test_bin/$(basename $bin)
+                cp $SRC $DST
+                echo $DST >> /tmp/zenith/etc/binaries.list
+              done
+            fi
+
+        # Install the postgres binaries, for use by test jobs
+      - run:
+          name: Install postgres binaries
+          command: |
+            cp -a tmp_install /tmp/zenith/pg_install
+
+        # Save the rust binaries and coverage data for other jobs in this workflow.
+      - persist_to_workspace:
+          root: /tmp/zenith
+          paths:
+            - "*"
+
+  check-codestyle-python:
+    executor: zenith-python-executor
+    steps:
+      - checkout
+      - run:
+          name: Install deps
+          command: pipenv --python 3.7 install --dev
+      - run:
+          name: Run yapf to ensure code format
+          when: always
+          command: pipenv run yapf --recursive --diff .
+      - run:
+          name: Run mypy to check types
+          when: always
+          command: pipenv run mypy .
+
+  run-pytest:
+    executor: zenith-python-executor
+    parameters:
+      # pytest args to specify the tests to run.
+      #
+      # This can be a test file name, e.g. 'test_pgbench.py, or a subdirectory,
+      # or '-k foobar' to run tests containing string 'foobar'. See pytest man page
+      # section SPECIFYING TESTS / SELECTING TESTS for details.
+      #
+      # Select the type of Rust build. Must be "release" or "debug".
+      build_type:
+        type: string
+        default: "debug"
+      # This parameter is required, to prevent the mistake of running all tests in one job.
+      test_selection:
+        type: string
+        default: ""
+      # Arbitrary parameters to pytest. For example "-s" to prevent capturing stdout/stderr
+      extra_params:
+        type: string
+        default: ""
+      needs_postgres_source:
+        type: boolean
+        default: false
+      run_in_parallel:
+        type: boolean
+        default: true
+      save_perf_report:
+        type: boolean
+        default: false
+    environment:
+      BUILD_TYPE: << parameters.build_type >>
+    steps:
+      - attach_workspace:
+          at: /tmp/zenith
+      - checkout
+      - when:
+          condition: << parameters.needs_postgres_source >>
+          steps:
+            - run: git submodule update --init --depth 1
+      - run:
+          name: Install deps
+          command: pipenv --python 3.7 install
+      - run:
+          name: Run pytest
+          # pytest doesn't output test logs in real time, so CI job may fail with
+          # `Too long with no output` error, if a test is running for a long time.
+          # In that case, tests should have internal timeouts that are less than
+          # no_output_timeout, specified here.
+          no_output_timeout: 10m
+          environment:
+            - ZENITH_BIN: /tmp/zenith/bin
+            - POSTGRES_DISTRIB_DIR: /tmp/zenith/pg_install
+            - TEST_OUTPUT: /tmp/test_output
+            # this variable will be embedded in perf test report
+            # and is needed to distinguish different environments
+            - PLATFORM: zenith-local-ci
+          command: |
+            PERF_REPORT_DIR="$(realpath test_runner/perf-report-local)"
+
+            TEST_SELECTION="test_runner/<< parameters.test_selection >>"
+            EXTRA_PARAMS="<< parameters.extra_params >>"
+            if [ -z "$TEST_SELECTION" ]; then
+              echo "test_selection must be set"
+              exit 1
+            fi
+            if << parameters.run_in_parallel >>; then
+              EXTRA_PARAMS="-n4 $EXTRA_PARAMS"
+            fi
+            if << parameters.save_perf_report >>; then
+              if [[ $CIRCLE_BRANCH == "main" ]]; then
+                mkdir -p "$PERF_REPORT_DIR"
+                EXTRA_PARAMS="--out-dir $PERF_REPORT_DIR $EXTRA_PARAMS"
+              fi
+            fi
+
+            export GITHUB_SHA=$CIRCLE_SHA1
+
+            if [[ $BUILD_TYPE == "debug" ]]; then
+              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
+            elif [[ $BUILD_TYPE == "release" ]]; then
+              cov_prefix=()
+            fi
+
+            # Run the tests.
+            #
+            # The junit.xml file allows CircleCI to display more fine-grained test information
+            # in its "Tests" tab in the results page.
+            # --verbose prints name of each test (helpful when there are
+            # multiple tests in one file)
+            # -rA prints summary in the end
+            # -n4 uses four processes to run tests via pytest-xdist
+            # -s is not used to prevent pytest from capturing output, because tests are running
+            # in parallel and logs are mixed between different tests
+            "${cov_prefix[@]}" pipenv run pytest \
+              --junitxml=$TEST_OUTPUT/junit.xml \
+              --tb=short \
+              --verbose \
+              -m "not remote_cluster" \
+              -rA $TEST_SELECTION $EXTRA_PARAMS
+
+            if << parameters.save_perf_report >>; then
+              if [[ $CIRCLE_BRANCH == "main" ]]; then
+                # TODO: reuse scripts/git-upload
+                export REPORT_FROM="$PERF_REPORT_DIR"
+                export REPORT_TO=local
+                scripts/generate_and_push_perf_report.sh
+              fi
+            fi
+      - run:
+          # CircleCI artifacts are preserved one file at a time, so skipping
+          # this step isn't a good idea. If you want to extract the
+          # pageserver state, perhaps a tarball would be a better idea.
+          name: Delete all data but logs
+          when: always
+          command: |
+            du -sh /tmp/test_output/*
+            find /tmp/test_output -type f ! -name "pg.log" ! -name "pageserver.log" ! -name "safekeeper.log" ! -name "regression.diffs" ! -name "junit.xml" ! -name "*.filediff" ! -name "*.stdout" ! -name "*.stderr" -delete
+            du -sh /tmp/test_output/*
+      - store_artifacts:
+          path: /tmp/test_output
+      # The store_test_results step tells CircleCI where to find the junit.xml file.
+      - store_test_results:
+          path: /tmp/test_output
+      # Save coverage data (if any)
+      - persist_to_workspace:
+          root: /tmp/zenith
+          paths:
+            - "*"
+
+  coverage-report:
+    executor: zenith-build-executor
+    steps:
+      - attach_workspace:
+          at: /tmp/zenith
+      - checkout
+      - restore_cache:
+          name: Restore rust cache
+          keys:
+            # Require an exact match. While an out of date cache might speed up the build,
+            # there's no way to clean out old packages, so the cache grows every time something
+            # changes.
+            - v04-rust-cache-deps-debug-{{ checksum "Cargo.lock" }}
+      - run:
+          name: Install llvm-tools
+          command: |
+            # TODO: install a proper symbol demangler, e.g. rustfilt
+            # TODO: we should embed this into a docker image
+            rustup component add llvm-tools-preview
+      - run:
+          name: Build coverage report
+          command: |
+            COMMIT_URL=https://github.com/zenithdb/zenith/commit/$CIRCLE_SHA1
+
+            scripts/coverage \
+              --dir=/tmp/zenith/coverage report \
+              --input-objects=/tmp/zenith/etc/binaries.list \
+              --commit-url=$COMMIT_URL \
+              --format=github
+      - run:
+          name: Upload coverage report
+          command: |
+            LOCAL_REPO=$CIRCLE_PROJECT_USERNAME/$CIRCLE_PROJECT_REPONAME
+            REPORT_URL=https://zenithdb.github.io/zenith-coverage-data/$CIRCLE_SHA1
+            COMMIT_URL=https://github.com/zenithdb/zenith/commit/$CIRCLE_SHA1
+
+            scripts/git-upload \
+              --repo=https://$VIP_VAP_ACCESS_TOKEN@github.com/zenithdb/zenith-coverage-data.git \
+              --message="Add code coverage for $COMMIT_URL" \
+              copy /tmp/zenith/coverage/report $CIRCLE_SHA1 # COPY FROM TO_RELATIVE
+
+            # Add link to the coverage report to the commit
+            curl -f -X POST \
+            https://api.github.com/repos/$LOCAL_REPO/statuses/$CIRCLE_SHA1 \
+            -H "Accept: application/vnd.github.v3+json" \
+            --user "$CI_ACCESS_TOKEN" \
+            --data \
+              "{
+                \"state\": \"success\",
+                \"context\": \"zenith-coverage\",
+                \"description\": \"Coverage report is ready\",
+                \"target_url\": \"$REPORT_URL\"
+              }"
+
+  # Build zenithdb/zenith:latest image and push it to Docker hub
+  docker-image:
+    docker:
+      - image: cimg/base:2021.04
+    steps:
+      - checkout
+      - setup_remote_docker:
+          docker_layer_caching: true
+      - run:
+          name: Init postgres submodule
+          command: git submodule update --init --depth 1
+      - run:
+          name: Build and push Docker image
+          command: |
+            echo $DOCKER_PWD | docker login -u $DOCKER_LOGIN --password-stdin
+            DOCKER_TAG=$(git log --oneline|wc -l)
+            docker build --build-arg GIT_VERSION=$CIRCLE_SHA1 -t zenithdb/zenith:latest . && docker push zenithdb/zenith:latest
+            docker tag zenithdb/zenith:latest zenithdb/zenith:${DOCKER_TAG} && docker push zenithdb/zenith:${DOCKER_TAG}
+
+  # Build zenithdb/compute-node:latest image and push it to Docker hub
+  docker-image-compute:
+    docker:
+      - image: cimg/base:2021.04
+    steps:
+      - checkout
+      - setup_remote_docker:
+          docker_layer_caching: true
+      # Build zenithdb/compute-tools:latest image and push it to Docker hub
+      # TODO: this should probably also use versioned tag, not just :latest.
+      # XXX: but should it? We build and use it only locally now.
+      - run:
+          name: Build and push compute-tools Docker image
+          command: |
+            echo $DOCKER_PWD | docker login -u $DOCKER_LOGIN --password-stdin
+            docker build -t zenithdb/compute-tools:latest ./compute_tools/
+            docker push zenithdb/compute-tools:latest
+      - run:
+          name: Init postgres submodule
+          command: git submodule update --init --depth 1
+      - run:
+          name: Build and push compute-node Docker image
+          command: |
+            echo $DOCKER_PWD | docker login -u $DOCKER_LOGIN --password-stdin
+            DOCKER_TAG=$(git log --oneline|wc -l)
+            docker build -t zenithdb/compute-node:latest vendor/postgres && docker push zenithdb/compute-node:latest
+            docker tag zenithdb/compute-node:latest zenithdb/compute-node:${DOCKER_TAG} && docker push zenithdb/compute-node:${DOCKER_TAG}
+
+  deploy-staging:
+    docker:
+      - image: cimg/python:3.10
+    steps:
+      - checkout
+      - setup_remote_docker
+      - run:
+          name: Get Zenith binaries
+          command: |
+            rm -rf zenith_install postgres_install.tar.gz zenith_install.tar.gz
+            mkdir zenith_install
+            DOCKER_TAG=$(git log --oneline|wc -l)
+            docker pull --quiet zenithdb/zenith:${DOCKER_TAG}
+            ID=$(docker create zenithdb/zenith:${DOCKER_TAG})
+            docker cp $ID:/data/postgres_install.tar.gz .
+            tar -xzf postgres_install.tar.gz -C zenith_install && rm postgres_install.tar.gz
+            docker cp $ID:/usr/local/bin/pageserver zenith_install/bin/
+            docker cp $ID:/usr/local/bin/safekeeper zenith_install/bin/
+            docker cp $ID:/usr/local/bin/proxy zenith_install/bin/
+            docker cp $ID:/usr/local/bin/postgres zenith_install/bin/
+            docker rm -v $ID
+            echo ${DOCKER_TAG} | tee zenith_install/.zenith_current_version
+            tar -czf zenith_install.tar.gz -C zenith_install .
+            ls -la zenith_install.tar.gz
+      - run:
+          name: Setup ansible
+          command: |
+            pip install --progress-bar off --user ansible boto3
+            ansible-galaxy collection install amazon.aws
+      - run:
+          name: Apply re-deploy playbook
+          environment:
+            ANSIBLE_HOST_KEY_CHECKING: false
+          command: |
+            echo "${STAGING_SSH_KEY}" | base64 --decode | ssh-add -
+            export AWS_REGION=${STAGING_AWS_REGION}
+            export AWS_ACCESS_KEY_ID=${STAGING_AWS_ACCESS_KEY_ID}
+            export AWS_SECRET_ACCESS_KEY=${STAGING_AWS_SECRET_ACCESS_KEY}
+            ansible-playbook .circleci/storage-redeploy.playbook.yml
+            rm -f zenith_install.tar.gz
+
+  deploy-staging-proxy:
+    docker:
+      - image: cimg/base:2021.04
+    environment:
+      KUBECONFIG: .kubeconfig
+    steps:
+      - checkout
+      - run:
+          name: Store kubeconfig file
+          command: |
+            echo "${STAGING_KUBECONFIG_DATA}" | base64 --decode > ${KUBECONFIG}
+            chmod 0600 ${KUBECONFIG}
+      - run:
+          name: Setup helm v3
+          command: |
+            curl -s https://raw.githubusercontent.com/helm/helm/main/scripts/get-helm-3 | bash
+            helm repo add zenithdb https://zenithdb.github.io/helm-charts
+      - run:
+          name: Re-deploy proxy
+          command: |
+            DOCKER_TAG=$(git log --oneline|wc -l)
+            helm upgrade zenith-proxy zenithdb/zenith-proxy --install -f .circleci/proxy.staging.yaml --set image.tag=${DOCKER_TAG} --wait
+
+  # Trigger a new remote CI job
+  remote-ci-trigger:
+    docker:
+      - image: cimg/base:2021.04
+    parameters:
+      remote_repo:
+        type: string
+    environment:
+      REMOTE_REPO: << parameters.remote_repo >>
+    steps:
+      - run:
+          name: Set PR's status to pending
+          command: |
+            LOCAL_REPO=$CIRCLE_PROJECT_USERNAME/$CIRCLE_PROJECT_REPONAME
+
+            curl -f -X POST \
+            https://api.github.com/repos/$LOCAL_REPO/statuses/$CIRCLE_SHA1 \
+            -H "Accept: application/vnd.github.v3+json" \
+            --user "$CI_ACCESS_TOKEN" \
+            --data \
+              "{
+                \"state\": \"pending\",
+                \"context\": \"zenith-remote-ci\",
+                \"description\": \"[$REMOTE_REPO] Remote CI job is about to start\"
+              }"
+      - run:
+          name: Request a remote CI test
+          command: |
+            LOCAL_REPO=$CIRCLE_PROJECT_USERNAME/$CIRCLE_PROJECT_REPONAME
+
+            curl -f -X POST \
+            https://api.github.com/repos/$REMOTE_REPO/actions/workflows/testing.yml/dispatches \
+            -H "Accept: application/vnd.github.v3+json" \
+            --user "$CI_ACCESS_TOKEN" \
+            --data \
+              "{
+                \"ref\": \"main\",
+                \"inputs\": {
+                  \"ci_job_name\": \"zenith-remote-ci\",
+                  \"commit_hash\": \"$CIRCLE_SHA1\",
+                  \"remote_repo\": \"$LOCAL_REPO\"
+                }
+              }"
+
+  #
+  #
+  # compute-tools jobs
+  # TODO: unify with main build_and_test pipeline
+  #
+  #
+  compute-tools-test:
+    executor: zenith-build-executor
+    working_directory: ~/repo/compute_tools
+    steps:
+      - checkout:
+          path: ~/repo
+
+      - restore_cache:
+          name: Restore rust cache
+          keys:
+            # Require an exact match. While an out of date cache might speed up the build,
+            # there's no way to clean out old packages, so the cache grows every time something
+            # changes.
+            - v03-rust-cache-deps-debug-{{ checksum "Cargo.lock" }}
+
+      # Build the rust code, including test binaries
+      - run:
+          name: Rust build
+          environment:
+            CARGO_INCREMENTAL: 0
+          command: cargo build --bins --tests
+
+      - save_cache:
+          name: Save rust cache
+          key: v03-rust-cache-deps-debug-{{ checksum "Cargo.lock" }}
+          paths:
+            - ~/.cargo/registry
+            - ~/.cargo/git
+            - target
+
+      # Run Rust formatting checks
+      - run:
+          name: cargo fmt check
+          command: cargo fmt --all -- --check
+
+      # Run Rust linter (clippy)
+      - run:
+          name: cargo clippy check
+          command: cargo clippy --all --all-targets -- -Dwarnings -Drust-2018-idioms
+
+      # Run Rust integration and unittests
+      - run: cargo test
+
+workflows:
+  build_and_test:
+    jobs:
+      - check-codestyle-rust
+      - check-codestyle-python
+      - build-postgres:
+          name: build-postgres-<< matrix.build_type >>
+          matrix:
+            parameters:
+              build_type: ["debug", "release"]
+      - build-zenith:
+          name: build-zenith-<< matrix.build_type >>
+          matrix:
+            parameters:
+              build_type: ["debug", "release"]
+          requires:
+            - build-postgres-<< matrix.build_type >>
+      - run-pytest:
+          name: pg_regress-tests-<< matrix.build_type >>
+          matrix:
+            parameters:
+              build_type: ["debug", "release"]
+          test_selection: batch_pg_regress
+          needs_postgres_source: true
+          requires:
+            - build-zenith-<< matrix.build_type >>
+      - run-pytest:
+          name: other-tests-<< matrix.build_type >>
+          matrix:
+            parameters:
+              build_type: ["debug", "release"]
+          test_selection: batch_others
+          requires:
+            - build-zenith-<< matrix.build_type >>
+      - run-pytest:
+          name: benchmarks
+          build_type: release
+          test_selection: performance
+          run_in_parallel: false
+          save_perf_report: true
+          requires:
+            - build-zenith-release
+      - coverage-report:
+          # Context passes credentials for gh api
+          context: CI_ACCESS_TOKEN
+          requires:
+            # TODO: consider adding more
+            - other-tests-debug
+      - compute-tools-test
+      - docker-image:
+          # Context gives an ability to login
+          context: Docker Hub
+          # Build image only for commits to main
+          filters:
+            branches:
+              only:
+                - main
+          requires:
+            - pg_regress-tests-release
+            - other-tests-release
+      - docker-image-compute:
+          # Context gives an ability to login
+          context: Docker Hub
+          # Build image only for commits to main
+          filters:
+            branches:
+              only:
+                - main
+          requires:
+            - pg_regress-tests-release
+            - other-tests-release
+            - compute-tools-test
+      - deploy-staging:
+          # Context gives an ability to login
+          context: Docker Hub
+          # deploy only for commits to main
+          filters:
+            branches:
+              only:
+                - main
+          requires:
+            - docker-image
+      - deploy-staging-proxy:
+          # deploy only for commits to main
+          filters:
+            branches:
+              only:
+                - main
+          requires:
+            - docker-image
+      - remote-ci-trigger:
+          # Context passes credentials for gh api
+          context: CI_ACCESS_TOKEN
+          remote_repo: "zenithdb/console"
+          requires:
+            # XXX: Successful build doesn't mean everything is OK, but
+            # the job to be triggered takes so much time to complete (~22 min)
+            # that it's better not to wait for the commented-out steps
+            - build-zenith-debug
+            # - pg_regress-tests-release
+            # - other-tests-release

.circleci/proxy.staging.yaml

@@ -0,0 +1,13 @@
+# Helm chart values for zenith-proxy.
+# This is a YAML-formatted file.
+
+settings:
+  authEndpoint: "https://console.stage.zenith.tech/authenticate_proxy_request/"
+  uri: "https://console.stage.zenith.tech/psql_session/"
+
+exposedService:
+  annotations:
+    service.beta.kubernetes.io/aws-load-balancer-type: external
+    service.beta.kubernetes.io/aws-load-balancer-nlb-target-type: ip
+    service.beta.kubernetes.io/aws-load-balancer-scheme: internet-facing
+    external-dns.alpha.kubernetes.io/hostname: start.stage.zenith.tech

.circleci/storage-redeploy.playbook.yml

@@ -0,0 +1,138 @@
+- name: discover storage nodes
+  hosts: localhost
+  connection: local
+  gather_facts: False
+
+  tasks:
+
+    - name: discover safekeepers
+      no_log: true
+      ec2_instance_info:
+        filters:
+          "tag:zenith_env": "staging"
+          "tag:zenith_service": "safekeeper"
+      register: ec2_safekeepers
+
+    - name: discover pageservers
+      no_log: true
+      ec2_instance_info:
+        filters:
+          "tag:zenith_env": "staging"
+          "tag:zenith_service": "pageserver"
+      register: ec2_pageservers
+
+    - name: add safekeepers to host group
+      no_log: true
+      add_host:
+        name: safekeeper-{{ ansible_loop.index }}
+        ansible_host: "{{ item.public_ip_address }}"
+        groups:
+          - storage
+          - safekeepers
+      with_items: "{{ ec2_safekeepers.instances }}"
+      loop_control:
+        extended: yes
+
+    - name: add pageservers to host group
+      no_log: true
+      add_host:
+        name: pageserver-{{ ansible_loop.index }}
+        ansible_host: "{{ item.public_ip_address }}"
+        groups:
+          - storage
+          - pageservers
+      with_items: "{{ ec2_pageservers.instances }}"
+      loop_control:
+        extended: yes
+
+- name: Retrive versions
+  hosts: storage
+  gather_facts: False
+  remote_user: admin
+
+  tasks:
+
+    - name: Get current version of binaries
+      set_fact:
+        current_version: "{{lookup('file', '../zenith_install/.zenith_current_version') }}"
+
+    - name: Check that file with version exists on host
+      stat:
+        path: /usr/local/.zenith_current_version
+      register: version_file
+
+    - name: Try to get current version from the host
+      when: version_file.stat.exists
+      ansible.builtin.fetch:
+        src: /usr/local/.zenith_current_version
+        dest: .remote_version.{{ inventory_hostname }}
+        fail_on_missing: no
+        flat: yes
+
+    - name: Store remote version to variable
+      when: version_file.stat.exists
+      set_fact:
+        remote_version: "{{ lookup('file', '.remote_version.{{ inventory_hostname }}') }}"
+
+    - name: Store default value of remote version to variable in case when remote version file not found
+      when: not version_file.stat.exists
+      set_fact:
+        remote_version: "000"
+
+- name: Extract Zenith binaries
+  hosts: storage
+  gather_facts: False
+  remote_user: admin
+
+  tasks:
+
+    - name: Inform about version conflict
+      when: current_version <= remote_version
+      debug: msg="Current version {{ current_version }} LE than remote {{ remote_version }}"
+
+    - name: Extract Zenith binaries to /usr/local
+      when: current_version > remote_version
+      ansible.builtin.unarchive:
+        src: ../zenith_install.tar.gz
+        dest: /usr/local
+      become: true
+
+- name: Restart safekeepers
+  hosts: safekeepers
+  gather_facts: False
+  remote_user: admin
+
+  tasks:
+
+    - name: Inform about version conflict
+      when: current_version <= remote_version
+      debug: msg="Current version {{ current_version }} LE than remote {{ remote_version }}"
+
+    - name: Restart systemd service
+      when: current_version > remote_version
+      ansible.builtin.systemd:
+        daemon_reload: yes
+        name: safekeeper
+        enabled: yes
+        state: restarted
+      become: true
+
+- name: Restart pageservers
+  hosts: pageservers
+  gather_facts: False
+  remote_user: admin
+
+  tasks:
+
+    - name: Inform about version conflict
+      when: current_version <= remote_version
+      debug: msg="Current version {{ current_version }} LE than remote {{ remote_version }}"
+
+    - name: Restart systemd service
+      when: current_version > remote_version
+      ansible.builtin.systemd:
+        daemon_reload: yes
+        name: pageserver
+        enabled: yes
+        state: restarted
+      become: true

.config/hakari.toml

@@ -1,26 +0,0 @@
-# This file contains settings for `cargo hakari`.
-# See https://docs.rs/cargo-hakari/latest/cargo_hakari/config for a full list of options.
-
-hakari-package = "workspace_hack"
-
-# Format for `workspace-hack = ...` lines in other Cargo.tomls. Requires cargo-hakari 0.9.8 or above.
-dep-format-version = "4"
-
-# Setting workspace.resolver = "2" in the root Cargo.toml is HIGHLY recommended.
-# Hakari works much better with the new feature resolver.
-# For more about the new feature resolver, see:
-# https://blog.rust-lang.org/2021/03/25/Rust-1.51.0.html#cargos-new-feature-resolver
-# Have to keep the resolver still here since hakari requires this field,
-# despite it's now the default for 2021 edition & cargo.
-resolver = "2"
-
-# Add triples corresponding to platforms commonly used by developers here.
-# https://doc.rust-lang.org/rustc/platform-support.html
-platforms = [
-    # "x86_64-unknown-linux-gnu",
-    # "x86_64-apple-darwin",
-    # "x86_64-pc-windows-msvc",
-]
-
-# Write out exact versions rather than a semver range. (Defaults to false.)
-# exact-versions = true

.dockerignore

@@ -1,24 +1,18 @@
-*
+**/.git/
+**/__pycache__
+**/.pytest_cache
 
-!rust-toolchain.toml
-!Cargo.toml
-!Cargo.lock
-!Makefile
+.git
+target
+tmp_check
+tmp_install
+tmp_check_cli
+test_output
+.vscode
+.zenith
+integration_tests/.zenith
+.mypy_cache
+
+Dockerfile
+.dockerignore
 
-!.cargo/
-!.config/
-!control_plane/
-!compute_tools/
-!libs/
-!pageserver/
-!pgxn/
-!proxy/
-!safekeeper/
-!storage_broker/
-!trace/
-!vendor/postgres-v14/
-!vendor/postgres-v15/
-!workspace_hack/
-!neon_local/
-!scripts/ninstall.sh
-!vm-cgconfig.conf

.git-blame-ignore-revs

@@ -1 +0,0 @@
-4c2bb43775947775401cbb9d774823c5723a91f8

.github/ISSUE_TEMPLATE/bug-template.md

@@ -1,23 +0,0 @@
----
-name: Bug Template
-about: Used for describing bugs
-title: ''
-labels: t/bug
-assignees: ''
-
----
-
-## Steps to reproduce
-
-
-## Expected result
-
-
-## Actual result
-
-
-## Environment
-
-
-## Logs, links
-- 

.github/ISSUE_TEMPLATE/epic-template.md

@@ -1,25 +0,0 @@
----
-name: Epic Template
-about: A set of related tasks contributing towards specific outcome, comprising of
-  more than 1 week of work.
-title: 'Epic: '
-labels: t/Epic
-assignees: ''
-
----
-
-## Motivation
-
-
-## DoD
-
-
-## Implementation ideas
-
-
-## Tasks
-- [ ]
-
-
-## Other related tasks and Epics
-- 

.github/PULL_REQUEST_TEMPLATE/release-pr.md

@@ -1,21 +0,0 @@
-## Release 202Y-MM-DD
-
-**NB: this PR must be merged only by 'Create a merge commit'!**
-
-### Checklist when preparing for release
-- [ ] Read or refresh [the release flow guide](https://github.com/neondatabase/cloud/wiki/Release:-general-flow)
-- [ ] Ask in the [cloud Slack channel](https://neondb.slack.com/archives/C033A2WE6BZ) that you are going to rollout the release. Any blockers?
-- [ ] Does this release contain any db migrations? Destructive ones? What is the rollback plan?
-
-<!-- List everything that should be done **before** release, any issues / setting changes / etc -->
-
-### Checklist after release
-- [ ] Make sure instructions from PRs included in this release and labeled `manual_release_instructions` are executed (either by you or by people who wrote them).
-- [ ] Based on the merged commits write release notes and open a PR into `website` repo ([example](https://github.com/neondatabase/website/pull/219/files))
-- [ ] Check [#dev-production-stream](https://neondb.slack.com/archives/C03F5SM1N02) Slack channel
-- [ ] Check [stuck projects page](https://console.neon.tech/admin/projects?sort=last_active&order=desc&stuck=true)
-- [ ] Check [recent operation failures](https://console.neon.tech/admin/operations?action=create_timeline%2Cstart_compute%2Cstop_compute%2Csuspend_compute%2Capply_config%2Cdelete_timeline%2Cdelete_tenant%2Ccreate_branch%2Ccheck_availability&sort=updated_at&order=desc&had_retries=some)
-- [ ] Check [cloud SLO dashboard](https://neonprod.grafana.net/d/_oWcBMJ7k/cloud-slos?orgId=1)
-- [ ] Check [compute startup metrics dashboard](https://neonprod.grafana.net/d/5OkYJEmVz/compute-startup-time)
-
-<!-- List everything that should be done **after** release, any admin UI configuration / Grafana dashboard / alert changes / setting changes / etc -->

.github/actions/allure-report-generate/action.yml

@@ -1,186 +0,0 @@
-name: 'Create Allure report'
-description: 'Generate Allure report from uploaded by actions/allure-report-store tests results'
-
-outputs:
-  report-url:
-    description: 'Allure report URL'
-    value: ${{ steps.generate-report.outputs.report-url }}
-  report-json-url:
-    description: 'Allure report JSON URL'
-    value: ${{ steps.generate-report.outputs.report-json-url }}
-
-runs:
-  using: "composite"
-
-  steps:
-    # We're using some of env variables quite offen, so let's set them once.
-    #
-    # It would be nice to have them set in common runs.env[0] section, but it doesn't work[1]
-    #
-    # - [0] https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runsenv
-    # - [1] https://github.com/neondatabase/neon/pull/3907#discussion_r1154703456
-    #
-    - name: Set variables
-      shell: bash -euxo pipefail {0}
-      run: |
-        PR_NUMBER=$(jq --raw-output .pull_request.number "$GITHUB_EVENT_PATH" || true)
-        if [ "${PR_NUMBER}" != "null" ]; then
-          BRANCH_OR_PR=pr-${PR_NUMBER}
-        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ]; then
-          # Shortcut for special branches
-          BRANCH_OR_PR=${GITHUB_REF_NAME}
-        else
-          BRANCH_OR_PR=branch-$(printf "${GITHUB_REF_NAME}" | tr -c "[:alnum:]._-" "-")
-        fi
-
-        LOCK_FILE=reports/${BRANCH_OR_PR}/lock.txt
-
-        WORKDIR=/tmp/${BRANCH_OR_PR}-$(date +%s)
-        mkdir -p ${WORKDIR}
-
-        echo "BRANCH_OR_PR=${BRANCH_OR_PR}" >> $GITHUB_ENV
-        echo "LOCK_FILE=${LOCK_FILE}"       >> $GITHUB_ENV
-        echo "WORKDIR=${WORKDIR}"           >> $GITHUB_ENV
-        echo "BUCKET=${BUCKET}"             >> $GITHUB_ENV
-      env:
-        BUCKET: neon-github-public-dev
-
-    # TODO: We can replace with a special docker image with Java and Allure pre-installed
-    - uses: actions/setup-java@v3
-      with:
-        distribution: 'temurin'
-        java-version: '17'
-
-    - name: Install Allure
-      shell: bash -euxo pipefail {0}
-      run: |
-        if ! which allure; then
-          ALLURE_ZIP=allure-${ALLURE_VERSION}.zip
-          wget -q https://github.com/allure-framework/allure2/releases/download/${ALLURE_VERSION}/${ALLURE_ZIP}
-          echo "${ALLURE_ZIP_SHA256} ${ALLURE_ZIP}" | sha256sum --check
-          unzip -q ${ALLURE_ZIP}
-          echo "$(pwd)/allure-${ALLURE_VERSION}/bin" >> $GITHUB_PATH
-          rm -f ${ALLURE_ZIP}
-        fi
-      env:
-        ALLURE_VERSION: 2.22.1
-        ALLURE_ZIP_SHA256: fdc7a62d94b14c5e0bf25198ae1feded6b005fdbed864b4d3cb4e5e901720b0b
-
-    # Potentially we could have several running build for the same key (for example, for the main branch), so we use improvised lock for this
-    - name: Acquire lock
-      shell: bash -euxo pipefail {0}
-      run: |
-        LOCK_TIMEOUT=300 # seconds
-
-        LOCK_CONTENT="${GITHUB_RUN_ID}-${GITHUB_RUN_ATTEMPT}"
-        echo ${LOCK_CONTENT} > ${WORKDIR}/lock.txt
-
-        # Do it up to 5 times to avoid race condition
-        for _ in $(seq 1 5); do
-          for i in $(seq 1 ${LOCK_TIMEOUT}); do
-            LOCK_ACQUIRED=$(aws s3api head-object --bucket neon-github-public-dev --key ${LOCK_FILE} | jq --raw-output '.LastModified' || true)
-            # `date --date="..."` is supported only by gnu date (i.e. it doesn't work on BSD/macOS)
-            if [ -z "${LOCK_ACQUIRED}" ] || [ "$(( $(date +%s) - $(date --date="${LOCK_ACQUIRED}" +%s) ))" -gt "${LOCK_TIMEOUT}" ]; then
-              break
-            fi
-            sleep 1
-          done
-
-          aws s3 mv --only-show-errors ${WORKDIR}/lock.txt "s3://${BUCKET}/${LOCK_FILE}"
-
-          # Double-check that exactly THIS run has acquired the lock
-          aws s3 cp --only-show-errors "s3://${BUCKET}/${LOCK_FILE}" ./lock.txt
-          if [ "$(cat lock.txt)" = "${LOCK_CONTENT}" ]; then
-            break
-          fi
-        done
-
-    - name: Generate and publish final Allure report
-      id: generate-report
-      shell: bash -euxo pipefail {0}
-      run: |
-        REPORT_PREFIX=reports/${BRANCH_OR_PR}
-        RAW_PREFIX=reports-raw/${BRANCH_OR_PR}/${GITHUB_RUN_ID}
-
-        # Get previously uploaded data for this run
-        ZSTD_NBTHREADS=0
-
-        S3_FILEPATHS=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${RAW_PREFIX}/ | jq --raw-output  '.Contents[].Key')
-        if [ -z "$S3_FILEPATHS" ]; then
-          # There's no previously uploaded data for this $GITHUB_RUN_ID
-          exit 0
-        fi
-        for S3_FILEPATH in ${S3_FILEPATHS}; do
-          time aws s3 cp --only-show-errors "s3://${BUCKET}/${S3_FILEPATH}" "${WORKDIR}"
-
-          archive=${WORKDIR}/$(basename $S3_FILEPATH)
-          mkdir -p ${archive%.tar.zst}
-          time tar -xf ${archive} -C ${archive%.tar.zst}
-          rm -f ${archive}
-        done
-
-        # Get history trend
-        time aws s3 cp --recursive --only-show-errors "s3://${BUCKET}/${REPORT_PREFIX}/latest/history" "${WORKDIR}/latest/history" || true
-
-        # Generate report
-        time allure generate --clean --output ${WORKDIR}/report ${WORKDIR}/*
-
-        # Replace a logo link with a redirect to the latest version of the report
-        sed -i 's|<a href="." class=|<a href="https://'${BUCKET}'.s3.amazonaws.com/'${REPORT_PREFIX}'/latest/index.html?nocache='"'+Date.now()+'"'" class=|g' ${WORKDIR}/report/app.js
-
-        # Upload a history and the final report (in this particular order to not to have duplicated history in 2 places)
-        time aws s3 mv --recursive --only-show-errors "${WORKDIR}/report/history" "s3://${BUCKET}/${REPORT_PREFIX}/latest/history"
-        time aws s3 mv --recursive --only-show-errors "${WORKDIR}/report" "s3://${BUCKET}/${REPORT_PREFIX}/${GITHUB_RUN_ID}"
-
-        REPORT_URL=https://${BUCKET}.s3.amazonaws.com/${REPORT_PREFIX}/${GITHUB_RUN_ID}/index.html
-
-        # Generate redirect
-        cat <<EOF > ${WORKDIR}/index.html
-          <!DOCTYPE html>
-
-          <meta charset="utf-8">
-          <title>Redirecting to ${REPORT_URL}</title>
-          <meta http-equiv="refresh" content="0; URL=${REPORT_URL}">
-        EOF
-        time aws s3 cp --only-show-errors ${WORKDIR}/index.html "s3://${BUCKET}/${REPORT_PREFIX}/latest/index.html"
-
-        echo "report-url=${REPORT_URL}"                                   >> $GITHUB_OUTPUT
-        echo "report-json-url=${REPORT_URL%/index.html}/data/suites.json" >> $GITHUB_OUTPUT
-
-        echo "[Allure Report](${REPORT_URL})" >> ${GITHUB_STEP_SUMMARY}
-
-    - name: Release lock
-      if: always()
-      shell: bash -euxo pipefail {0}
-      run: |
-        aws s3 cp --only-show-errors "s3://${BUCKET}/${LOCK_FILE}" ./lock.txt || exit 0
-
-        if [ "$(cat lock.txt)" = "${GITHUB_RUN_ID}-${GITHUB_RUN_ATTEMPT}" ]; then
-          aws s3 rm "s3://${BUCKET}/${LOCK_FILE}"
-        fi
-
-    - name: Cleanup
-      if: always()
-      shell: bash -euxo pipefail {0}
-      run: |
-        if [ -d "${WORKDIR}" ]; then
-          rm -rf ${WORKDIR}
-        fi
-
-    - uses: actions/github-script@v6
-      if: always()
-      env:
-        REPORT_URL: ${{ steps.generate-report.outputs.report-url }}
-        COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-      with:
-        script: |
-          const { REPORT_URL, COMMIT_SHA } = process.env
-
-          await github.rest.repos.createCommitStatus({
-            owner: context.repo.owner,
-            repo: context.repo.repo,
-            sha: `${COMMIT_SHA}`,
-            state: 'success',
-            target_url: `${REPORT_URL}`,
-            context: 'Allure report',
-          })

.github/actions/allure-report-store/action.yml

@@ -1,72 +0,0 @@
-name: 'Store Allure results'
-description: 'Upload test results to be used by actions/allure-report-generate'
-
-inputs:
-  report-dir:
-    description: 'directory with test results generated by tests'
-    required: true
-  unique-key:
-    description: 'string to distinguish different results in the same run'
-    required: true
-
-runs:
-  using: "composite"
-
-  steps:
-    - name: Set variables
-      shell: bash -euxo pipefail {0}
-      run: |
-        PR_NUMBER=$(jq --raw-output .pull_request.number "$GITHUB_EVENT_PATH" || true)
-        if [ "${PR_NUMBER}" != "null" ]; then
-          BRANCH_OR_PR=pr-${PR_NUMBER}
-        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ]; then
-          # Shortcut for special branches
-          BRANCH_OR_PR=${GITHUB_REF_NAME}
-        else
-          BRANCH_OR_PR=branch-$(printf "${GITHUB_REF_NAME}" | tr -c "[:alnum:]._-" "-")
-        fi
-
-        echo "BRANCH_OR_PR=${BRANCH_OR_PR}" >> $GITHUB_ENV
-        echo "REPORT_DIR=${REPORT_DIR}"     >> $GITHUB_ENV
-      env:
-        REPORT_DIR: ${{ inputs.report-dir }}
-
-    - name: Upload test results
-      shell: bash -euxo pipefail {0}
-      run: |
-        REPORT_PREFIX=reports/${BRANCH_OR_PR}
-        RAW_PREFIX=reports-raw/${BRANCH_OR_PR}/${GITHUB_RUN_ID}
-
-        # Add metadata
-        cat <<EOF > ${REPORT_DIR}/executor.json
-          {
-            "name": "GitHub Actions",
-            "type": "github",
-            "url": "https://${BUCKET}.s3.amazonaws.com/${REPORT_PREFIX}/latest/index.html",
-            "buildOrder": ${GITHUB_RUN_ID},
-            "buildName": "GitHub Actions Run #${GITHUB_RUN_NUMBER}/${GITHUB_RUN_ATTEMPT}",
-            "buildUrl": "${GITHUB_SERVER_URL}/${GITHUB_REPOSITORY}/actions/runs/${GITHUB_RUN_ID}/attempts/${GITHUB_RUN_ATTEMPT}",
-            "reportUrl": "https://${BUCKET}.s3.amazonaws.com/${REPORT_PREFIX}/${GITHUB_RUN_ID}/index.html",
-            "reportName": "Allure Report"
-          }
-        EOF
-
-        cat <<EOF > ${REPORT_DIR}/environment.properties
-          COMMIT_SHA=${COMMIT_SHA}
-        EOF
-
-        ARCHIVE="${UNIQUE_KEY}-${GITHUB_RUN_ATTEMPT}-$(date +%s).tar.zst"
-        ZSTD_NBTHREADS=0
-
-        time tar -C ${REPORT_DIR} -cf ${ARCHIVE} --zstd .
-        time aws s3 mv --only-show-errors ${ARCHIVE} "s3://${BUCKET}/${RAW_PREFIX}/${ARCHIVE}"
-      env:
-        UNIQUE_KEY: ${{ inputs.unique-key }}
-        COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-        BUCKET: neon-github-public-dev
-
-    - name: Cleanup
-      if: always()
-      shell: bash -euxo pipefail {0}
-      run: |
-        rm -rf ${REPORT_DIR}

.github/actions/download/action.yml

@@ -1,59 +0,0 @@
-name: "Download an artifact"
-description: "Custom download action"
-inputs:
-  name:
-    description: "Artifact name"
-    required: true
-  path:
-    description: "A directory to put artifact into"
-    default: "."
-    required: false
-  skip-if-does-not-exist:
-    description: "Allow to skip if file doesn't exist, fail otherwise"
-    default: false
-    required: false
-  prefix:
-    description: "S3 prefix. Default is '${GITHUB_RUN_ID}/${GITHUB_RUN_ATTEMPT}'"
-    required: false
-
-runs:
-  using: "composite"
-  steps:
-    - name: Download artifact
-      id: download-artifact
-      shell: bash -euxo pipefail {0}
-      env:
-        TARGET: ${{ inputs.path }}
-        ARCHIVE: /tmp/downloads/${{ inputs.name }}.tar.zst
-        SKIP_IF_DOES_NOT_EXIST: ${{ inputs.skip-if-does-not-exist }}
-        PREFIX: artifacts/${{ inputs.prefix || format('{0}/{1}', github.run_id, github.run_attempt) }}
-      run: |
-        BUCKET=neon-github-public-dev
-        FILENAME=$(basename $ARCHIVE)
-
-        S3_KEY=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${PREFIX%$GITHUB_RUN_ATTEMPT} | jq -r '.Contents[].Key' | grep ${FILENAME} | sort --version-sort | tail -1 || true)
-        if [ -z "${S3_KEY}" ]; then
-          if [ "${SKIP_IF_DOES_NOT_EXIST}" = "true" ]; then
-            echo 'SKIPPED=true' >> $GITHUB_OUTPUT
-            exit 0
-          else
-            echo >&2 "Neither s3://${BUCKET}/${PREFIX}/${FILENAME} nor its version from previous attempts exist"
-            exit 1
-          fi
-        fi
-
-        echo 'SKIPPED=false' >> $GITHUB_OUTPUT
-
-        mkdir -p $(dirname $ARCHIVE)
-        time aws s3 cp --only-show-errors s3://${BUCKET}/${S3_KEY} ${ARCHIVE}
-
-    - name: Extract artifact
-      if: ${{ steps.download-artifact.outputs.SKIPPED == 'false' }}
-      shell: bash -euxo pipefail {0}
-      env:
-        TARGET: ${{ inputs.path }}
-        ARCHIVE: /tmp/downloads/${{ inputs.name }}.tar.zst
-      run: |
-        mkdir -p ${TARGET}
-        time tar -xf ${ARCHIVE} -C ${TARGET}
-        rm -f ${ARCHIVE}

.github/actions/neon-branch-create/action.yml

@@ -1,138 +0,0 @@
-name: 'Create Branch'
-description: 'Create Branch using API'
-
-inputs:
-  api_key:
-    desctiption: 'Neon API key'
-    required: true
-  project_id:
-    desctiption: 'ID of the Project to create Branch in'
-    required: true
-  api_host:
-    desctiption: 'Neon API host'
-    default: console.stage.neon.tech
-outputs:
-  dsn:
-    description: 'Created Branch DSN (for main database)'
-    value: ${{ steps.change-password.outputs.dsn }}
-  branch_id:
-    description: 'Created Branch ID'
-    value: ${{ steps.create-branch.outputs.branch_id }}
-
-runs:
-  using: "composite"
-  steps:
-    - name: Create New Branch
-      id: create-branch
-      shell: bash -euxo pipefail {0}
-      run: |
-        for i in $(seq 1 10); do
-         branch=$(curl \
-            "https://${API_HOST}/api/v2/projects/${PROJECT_ID}/branches" \
-            --header "Accept: application/json" \
-            --header "Content-Type: application/json" \
-            --header "Authorization: Bearer ${API_KEY}" \
-            --data "{
-              \"branch\": {
-                \"name\": \"Created by actions/neon-branch-create; GITHUB_RUN_ID=${GITHUB_RUN_ID} at $(date +%s)\"
-              },
-              \"endpoints\": [
-                {
-                  \"type\": \"read_write\"
-                }
-              ]
-            }")
-
-          if [ -z "${branch}" ]; then
-            sleep 1
-            continue
-          fi
-
-          branch_id=$(echo $branch | jq --raw-output '.branch.id')
-          if [ "${branch_id}" == "null" ]; then
-            sleep 1
-            continue
-          fi
-
-          break
-        done
-
-        if [ -z "${branch_id}" ] || [ "${branch_id}" == "null" ]; then
-          echo >&2 "Failed to create branch after 10 attempts, the latest response was: ${branch}"
-          exit 1
-        fi
-
-        branch_id=$(echo $branch | jq --raw-output '.branch.id')
-        echo "branch_id=${branch_id}" >> $GITHUB_OUTPUT
-
-        host=$(echo $branch | jq --raw-output '.endpoints[0].host')
-        echo "host=${host}" >> $GITHUB_OUTPUT
-      env:
-        API_HOST: ${{ inputs.api_host }}
-        API_KEY: ${{ inputs.api_key }}
-        PROJECT_ID: ${{ inputs.project_id }}
-
-    - name: Get Role name
-      id: role-name
-      shell: bash -euxo pipefail {0}
-      run: |
-        roles=$(curl \
-          "https://${API_HOST}/api/v2/projects/${PROJECT_ID}/branches/${BRANCH_ID}/roles" \
-          --fail \
-          --header "Accept: application/json" \
-          --header "Content-Type: application/json" \
-          --header "Authorization: Bearer ${API_KEY}"
-          )
-
-        role_name=$(echo $roles | jq --raw-output '.roles[] | select(.protected == false) | .name')
-        echo "role_name=${role_name}" >> $GITHUB_OUTPUT
-      env:
-        API_HOST: ${{ inputs.api_host }}
-        API_KEY: ${{ inputs.api_key }}
-        PROJECT_ID: ${{ inputs.project_id }}
-        BRANCH_ID: ${{ steps.create-branch.outputs.branch_id }}
-
-    - name: Change Password
-      id: change-password
-      # A shell without `set -x` to not to expose password/dsn in logs
-      shell: bash -euo pipefail {0}
-      run: |
-        for i in $(seq 1 10); do
-          reset_password=$(curl \
-            "https://${API_HOST}/api/v2/projects/${PROJECT_ID}/branches/${BRANCH_ID}/roles/${ROLE_NAME}/reset_password" \
-            --request POST \
-            --header "Accept: application/json" \
-            --header "Content-Type: application/json" \
-            --header "Authorization: Bearer ${API_KEY}"
-            )
-
-          if [ -z "${reset_password}" ]; then
-            sleep 1
-            continue
-          fi
-
-          password=$(echo $reset_password | jq --raw-output '.role.password')
-          if [ "${password}" == "null" ]; then
-            sleep 1
-            continue
-          fi
-
-          echo "::add-mask::${password}"
-          break
-        done
-
-        if [ -z "${password}" ] || [ "${password}" == "null" ]; then
-          echo >&2 "Failed to reset password after 10 attempts, the latest response was: ${reset_password}"
-          exit 1
-        fi
-
-        dsn="postgres://${ROLE_NAME}:${password}@${HOST}/neondb"
-        echo "::add-mask::${dsn}"
-        echo "dsn=${dsn}" >> $GITHUB_OUTPUT
-      env:
-        API_HOST: ${{ inputs.api_host }}
-        API_KEY: ${{ inputs.api_key }}
-        PROJECT_ID: ${{ inputs.project_id }}
-        BRANCH_ID: ${{ steps.create-branch.outputs.branch_id }}
-        ROLE_NAME: ${{ steps.role-name.outputs.role_name }}
-        HOST: ${{ steps.create-branch.outputs.host }}

.github/actions/neon-branch-delete/action.yml

@@ -1,58 +0,0 @@
-name: 'Delete Branch'
-description: 'Delete Branch using API'
-
-inputs:
-  api_key:
-    desctiption: 'Neon API key'
-    required: true
-  project_id:
-    desctiption: 'ID of the Project which should be deleted'
-    required: true
-  branch_id:
-    desctiption: 'ID of the branch to delete'
-    required: true
-  api_host:
-    desctiption: 'Neon API host'
-    default: console.stage.neon.tech
-
-runs:
-  using: "composite"
-  steps:
-    - name: Delete Branch
-      # Do not try to delete a branch if .github/actions/neon-project-create
-      # or .github/actions/neon-branch-create failed before
-      if: ${{ inputs.project_id != '' && inputs.branch_id != '' }}
-      shell: bash -euxo pipefail {0}
-      run: |
-        for i in $(seq 1 10); do
-          deleted_branch=$(curl \
-            "https://${API_HOST}/api/v2/projects/${PROJECT_ID}/branches/${BRANCH_ID}" \
-            --request DELETE \
-            --header "Accept: application/json" \
-            --header "Content-Type: application/json" \
-            --header "Authorization: Bearer ${API_KEY}"
-            )
-
-          if [ -z "${deleted_branch}" ]; then
-            sleep 1
-            continue
-          fi
-
-          branch_id=$(echo $deleted_branch | jq --raw-output '.branch.id')
-          if [ "${branch_id}" == "null" ]; then
-            sleep 1
-            continue
-          fi
-
-          break
-        done
-
-        if [ -z "${branch_id}" ] || [ "${branch_id}" == "null" ]; then
-          echo >&2 "Failed to delete branch after 10 attempts, the latest response was: ${deleted_branch}"
-          exit 1
-        fi
-      env:
-        API_HOST: ${{ inputs.api_host }}
-        API_KEY: ${{ inputs.api_key }}
-        PROJECT_ID: ${{ inputs.project_id }}
-        BRANCH_ID: ${{ inputs.branch_id }}

.github/actions/neon-project-create/action.yml

@@ -1,80 +0,0 @@
-name: 'Create Neon Project'
-description: 'Create Neon Project using API'
-
-inputs:
-  api_key:
-    desctiption: 'Neon API key'
-    required: true
-  region_id:
-    desctiption: 'Region ID, if not set the project will be created in the default region'
-    default: aws-us-east-2
-  postgres_version:
-    desctiption: 'Postgres version; default is 15'
-    default: 15
-  api_host:
-    desctiption: 'Neon API host'
-    default: console.stage.neon.tech
-  provisioner:
-    desctiption: 'k8s-pod or k8s-neonvm'
-    default: 'k8s-pod'
-  compute_units:
-    desctiption: '[Min, Max] compute units; Min and Max are used for k8s-neonvm with autoscaling, for k8s-pod values Min and Max should be equal'
-    default: '[1, 1]'
-
-outputs:
-  dsn:
-    description: 'Created Project DSN (for main database)'
-    value: ${{ steps.create-neon-project.outputs.dsn }}
-  project_id:
-    description: 'Created Project ID'
-    value: ${{ steps.create-neon-project.outputs.project_id }}
-
-runs:
-  using: "composite"
-  steps:
-    - name: Create Neon Project
-      id: create-neon-project
-      # A shell without `set -x` to not to expose password/dsn in logs
-      shell: bash -euo pipefail {0}
-      run: |
-        if [ "${PROVISIONER}" == "k8s-pod" ] && [ "${MIN_CU}" != "${MAX_CU}" ]; then
-          echo >&2 "For k8s-pod provisioner MIN_CU should be equal to MAX_CU"
-        fi
-
-        project=$(curl \
-          "https://${API_HOST}/api/v2/projects" \
-          --fail \
-          --header "Accept: application/json" \
-          --header "Content-Type: application/json" \
-          --header "Authorization: Bearer ${API_KEY}" \
-          --data "{
-            \"project\": {
-              \"name\": \"Created by actions/neon-project-create; GITHUB_RUN_ID=${GITHUB_RUN_ID}\",
-              \"pg_version\": ${POSTGRES_VERSION},
-              \"region_id\": \"${REGION_ID}\",
-              \"provisioner\": \"${PROVISIONER}\",
-              \"autoscaling_limit_min_cu\": ${MIN_CU},
-              \"autoscaling_limit_max_cu\": ${MAX_CU},
-              \"settings\": { }
-            }
-          }")
-
-        # Mask password
-        echo "::add-mask::$(echo $project | jq --raw-output '.roles[] | select(.name != "web_access") | .password')"
-
-        dsn=$(echo $project | jq --raw-output '.connection_uris[0].connection_uri')
-        echo "::add-mask::${dsn}"
-        echo "dsn=${dsn}" >> $GITHUB_OUTPUT
-
-        project_id=$(echo $project | jq --raw-output '.project.id')
-        echo "project_id=${project_id}" >> $GITHUB_OUTPUT
-
-        echo "Project ${project_id} has been created"
-      env:
-        API_HOST: ${{ inputs.api_host }}
-        API_KEY: ${{ inputs.api_key }}
-        REGION_ID: ${{ inputs.region_id }}
-        POSTGRES_VERSION: ${{ inputs.postgres_version }}
-        PROVISIONER: ${{ inputs.provisioner }}
-        MIN_CU: ${{ fromJSON(inputs.compute_units)[0] }}
-        MAX_CU: ${{ fromJSON(inputs.compute_units)[1] }}

.github/actions/neon-project-delete/action.yml

@@ -1,35 +0,0 @@
-name: 'Delete Neon Project'
-description: 'Delete Neon Project using API'
-
-inputs:
-  api_key:
-    desctiption: 'Neon API key'
-    required: true
-  project_id:
-    desctiption: 'ID of the Project to delete'
-    required: true
-  api_host:
-    desctiption: 'Neon API host'
-    default: console.stage.neon.tech
-
-runs:
-  using: "composite"
-  steps:
-    - name: Delete Neon Project
-      # Do not try to delete a project if .github/actions/neon-project-create failed before
-      if: ${{ inputs.project_id != '' }}
-      shell: bash -euxo pipefail {0}
-      run: |
-        curl \
-          "https://${API_HOST}/api/v2/projects/${PROJECT_ID}" \
-          --fail \
-          --request DELETE \
-          --header "Accept: application/json" \
-          --header "Content-Type: application/json" \
-          --header "Authorization: Bearer ${API_KEY}"
-
-        echo "Project ${PROJECT_ID} has been deleted"
-      env:
-        API_HOST: ${{ inputs.api_host }}
-        API_KEY: ${{ inputs.api_key }}
-        PROJECT_ID: ${{ inputs.project_id }}

.github/actions/run-python-test-set/action.yml

@@ -1,204 +0,0 @@
-name: 'Run python test'
-description: 'Runs a Neon python test set, performing all the required preparations before'
-
-inputs:
-  build_type:
-    description: 'Type of Rust (neon) and C (postgres) builds. Must be "release" or "debug", or "remote" for the remote cluster'
-    required: true
-  test_selection:
-    description: 'A python test suite to run'
-    required: true
-  extra_params:
-    description: 'Arbitrary parameters to pytest. For example "-s" to prevent capturing stdout/stderr'
-    required: false
-    default: ''
-  needs_postgres_source:
-    description: 'Set to true if the test suite requires postgres source checked out'
-    required: false
-    default: 'false'
-  run_in_parallel:
-    description: 'Whether to run tests in parallel'
-    required: false
-    default: 'true'
-  save_perf_report:
-    description: 'Whether to upload the performance report, if true PERF_TEST_RESULT_CONNSTR env variable should be set'
-    required: false
-    default: 'false'
-  run_with_real_s3:
-    description: 'Whether to pass real s3 credentials to the test suite'
-    required: false
-    default: 'false'
-  real_s3_bucket:
-    description: 'Bucket name for real s3 tests'
-    required: false
-    default: ''
-  real_s3_region:
-    description: 'Region name for real s3 tests'
-    required: false
-    default: ''
-  rerun_flaky:
-    description: 'Whether to rerun flaky tests'
-    required: false
-    default: 'false'
-  pg_version:
-    description: 'Postgres version to use for tests'
-    required: false
-    default: 'v14'
-
-runs:
-  using: "composite"
-  steps:
-    - name: Get Neon artifact
-      if: inputs.build_type != 'remote'
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-${{ inputs.build_type }}-artifact
-        path: /tmp/neon
-
-    - name: Download Neon binaries for the previous release
-      if: inputs.build_type != 'remote'
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-${{ inputs.build_type }}-artifact
-        path: /tmp/neon-previous
-        prefix: latest
-
-    - name: Download compatibility snapshot
-      if: inputs.build_type != 'remote'
-      uses: ./.github/actions/download
-      with:
-        name: compatibility-snapshot-${{ inputs.build_type }}-pg${{ inputs.pg_version }}
-        path: /tmp/compatibility_snapshot_pg${{ inputs.pg_version }}
-        prefix: latest
-
-    - name: Checkout
-      if: inputs.needs_postgres_source == 'true'
-      uses: actions/checkout@v3
-      with:
-        submodules: true
-        fetch-depth: 1
-
-    - name: Cache poetry deps
-      id: cache_poetry
-      uses: actions/cache@v3
-      with:
-        path: ~/.cache/pypoetry/virtualenvs
-        key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
-
-    - name: Install Python deps
-      shell: bash -euxo pipefail {0}
-      run: ./scripts/pysync
-
-    - name: Run pytest
-      env:
-        NEON_BIN: /tmp/neon/bin
-        COMPATIBILITY_NEON_BIN: /tmp/neon-previous/bin
-        COMPATIBILITY_POSTGRES_DISTRIB_DIR: /tmp/neon-previous/pg_install
-        TEST_OUTPUT: /tmp/test_output
-        BUILD_TYPE: ${{ inputs.build_type }}
-        COMPATIBILITY_SNAPSHOT_DIR: /tmp/compatibility_snapshot_pg${{ inputs.pg_version }}
-        ALLOW_BACKWARD_COMPATIBILITY_BREAKAGE: contains(github.event.pull_request.labels.*.name, 'backward compatibility breakage')
-        ALLOW_FORWARD_COMPATIBILITY_BREAKAGE: contains(github.event.pull_request.labels.*.name, 'forward compatibility breakage')
-        RERUN_FLAKY: ${{ inputs.rerun_flaky }}
-        PG_VERSION: ${{ inputs.pg_version }}
-      shell: bash -euxo pipefail {0}
-      run: |
-        # PLATFORM will be embedded in the perf test report
-        # and it is needed to distinguish different environments
-        export PLATFORM=${PLATFORM:-github-actions-selfhosted}
-        export POSTGRES_DISTRIB_DIR=${POSTGRES_DISTRIB_DIR:-/tmp/neon/pg_install}
-        export DEFAULT_PG_VERSION=${PG_VERSION#v}
-
-        if [ "${BUILD_TYPE}" = "remote" ]; then
-          export REMOTE_ENV=1
-        fi
-
-        PERF_REPORT_DIR="$(realpath test_runner/perf-report-local)"
-        rm -rf $PERF_REPORT_DIR
-
-        TEST_SELECTION="test_runner/${{ inputs.test_selection }}"
-        EXTRA_PARAMS="${{ inputs.extra_params }}"
-        if [ -z "$TEST_SELECTION" ]; then
-          echo "test_selection must be set"
-          exit 1
-        fi
-        if [[ "${{ inputs.run_in_parallel }}" == "true" ]]; then
-          # -n16 uses sixteen processes to run tests via pytest-xdist
-          EXTRA_PARAMS="-n16 $EXTRA_PARAMS"
-
-          # --dist=loadgroup points tests marked with @pytest.mark.xdist_group
-          # to the same worker to make @pytest.mark.order work with xdist
-          EXTRA_PARAMS="--dist=loadgroup $EXTRA_PARAMS"
-        fi
-
-        if [[ "${{ inputs.run_with_real_s3 }}" == "true" ]]; then
-          echo "REAL S3 ENABLED"
-          export ENABLE_REAL_S3_REMOTE_STORAGE=nonempty
-          export REMOTE_STORAGE_S3_BUCKET=${{ inputs.real_s3_bucket }}
-          export REMOTE_STORAGE_S3_REGION=${{ inputs.real_s3_region }}
-        fi
-
-        if [[ "${{ inputs.save_perf_report }}" == "true" ]]; then
-          mkdir -p "$PERF_REPORT_DIR"
-          EXTRA_PARAMS="--out-dir $PERF_REPORT_DIR $EXTRA_PARAMS"
-        fi
-
-        if [ "${RERUN_FLAKY}" == "true" ]; then
-          mkdir -p $TEST_OUTPUT
-          poetry run ./scripts/flaky_tests.py "${TEST_RESULT_CONNSTR}" --days 10 --output "$TEST_OUTPUT/flaky.json"
-
-          EXTRA_PARAMS="--flaky-tests-json $TEST_OUTPUT/flaky.json $EXTRA_PARAMS"
-        fi
-
-        if [[ "${{ inputs.build_type }}" == "debug" ]]; then
-          cov_prefix=(scripts/coverage "--profraw-prefix=$GITHUB_JOB" --dir=/tmp/coverage run)
-        elif [[ "${{ inputs.build_type }}" == "release" ]]; then
-          cov_prefix=()
-        else
-          cov_prefix=()
-        fi
-
-        # Wake up the cluster if we use remote neon instance
-        if [ "${{ inputs.build_type }}" = "remote" ] && [ -n "${BENCHMARK_CONNSTR}" ]; then
-          ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/psql ${BENCHMARK_CONNSTR} -c "SELECT version();"
-        fi
-
-        # Run the tests.
-        #
-        # The junit.xml file allows CI tools to display more fine-grained test information
-        # in its "Tests" tab in the results page.
-        # --verbose prints name of each test (helpful when there are
-        # multiple tests in one file)
-        # -rA prints summary in the end
-        # -s is not used to prevent pytest from capturing output, because tests are running
-        # in parallel and logs are mixed between different tests
-        #
-        mkdir -p $TEST_OUTPUT/allure/results
-        "${cov_prefix[@]}" ./scripts/pytest \
-          --junitxml=$TEST_OUTPUT/junit.xml \
-          --alluredir=$TEST_OUTPUT/allure/results \
-          --tb=short \
-          --verbose \
-          -rA $TEST_SELECTION $EXTRA_PARAMS
-
-        if [[ "${{ inputs.save_perf_report }}" == "true" ]]; then
-          export REPORT_FROM="$PERF_REPORT_DIR"
-          export REPORT_TO="$PLATFORM"
-          scripts/generate_and_push_perf_report.sh
-        fi
-
-    - name: Upload compatibility snapshot
-      if: github.ref_name == 'release'
-      uses: ./.github/actions/upload
-      with:
-        name: compatibility-snapshot-${{ inputs.build_type }}-pg${{ inputs.pg_version }}-${{ github.run_id }}
-        # Directory is created by test_compatibility.py::test_create_snapshot, keep the path in sync with the test
-        path: /tmp/test_output/compatibility_snapshot_pg${{ inputs.pg_version }}/
-        prefix: latest
-
-    - name: Upload test results
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-store
-      with:
-        report-dir: /tmp/test_output/allure/results
-        unique-key: ${{ inputs.build_type }}

.github/actions/save-coverage-data/action.yml

@@ -1,22 +0,0 @@
-name: 'Merge and upload coverage data'
-description: 'Compresses and uploads the coverage data as an artifact'
-
-runs:
-  using: "composite"
-  steps:
-    - name: Merge coverage data
-      shell: bash -euxo pipefail {0}
-      run: scripts/coverage "--profraw-prefix=$GITHUB_JOB" --dir=/tmp/coverage merge
-
-    - name: Download previous coverage data into the same directory
-      uses: ./.github/actions/download
-      with:
-        name: coverage-data-artifact
-        path: /tmp/coverage
-        skip-if-does-not-exist: true # skip if there's no previous coverage to download
-
-    - name: Upload coverage data
-      uses: ./.github/actions/upload
-      with:
-        name: coverage-data-artifact
-        path: /tmp/coverage

.github/actions/upload/action.yml

@@ -1,58 +0,0 @@
-name: "Upload an artifact"
-description: "Custom upload action"
-inputs:
-  name:
-    description: "Artifact name"
-    required: true
-  path:
-    description: "A directory or file to upload"
-    required: true
-  prefix:
-    description: "S3 prefix. Default is '${GITHUB_RUN_ID}/${GITHUB_RUN_ATTEMPT}'"
-    required: false
-
-runs:
-  using: "composite"
-  steps:
-    - name: Prepare artifact
-      shell: bash -euxo pipefail {0}
-      env:
-        SOURCE: ${{ inputs.path }}
-        ARCHIVE: /tmp/uploads/${{ inputs.name }}.tar.zst
-      run: |
-        mkdir -p $(dirname $ARCHIVE)
-
-        if [ -f ${ARCHIVE} ]; then
-          echo >&2 "File ${ARCHIVE} already exist. Something went wrong before"
-          exit 1
-        fi
-
-        ZSTD_NBTHREADS=0
-        if [ -d  ${SOURCE} ]; then
-          time tar -C ${SOURCE} -cf ${ARCHIVE} --zstd .
-        elif [ -f ${SOURCE} ]; then
-          time tar -cf ${ARCHIVE} --zstd ${SOURCE}
-        elif ! ls ${SOURCE} > /dev/null 2>&1; then
-          echo >&2 "${SOURCE} does not exist"
-          exit 2
-        else
-          echo >&2 "${SOURCE} is neither a directory nor a file, do not know how to handle it"
-          exit 3
-        fi
-
-    - name: Upload artifact
-      shell: bash -euxo pipefail {0}
-      env:
-        SOURCE: ${{ inputs.path }}
-        ARCHIVE: /tmp/uploads/${{ inputs.name }}.tar.zst
-        PREFIX: artifacts/${{ inputs.prefix || format('{0}/{1}', github.run_id, github.run_attempt) }}
-      run: |
-        BUCKET=neon-github-public-dev
-        FILENAME=$(basename $ARCHIVE)
-
-        FILESIZE=$(du -sh ${ARCHIVE} | cut -f1)
-
-        time aws s3 mv --only-show-errors ${ARCHIVE} s3://${BUCKET}/${PREFIX}/${FILENAME}
-
-        # Ref https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions#adding-a-job-summary
-        echo "[${FILENAME}](https://${BUCKET}.s3.amazonaws.com/${PREFIX}/${FILENAME}) ${FILESIZE}" >> ${GITHUB_STEP_SUMMARY}

.github/pull_request_template.md

@@ -1,14 +0,0 @@
-## Problem
-
-## Summary of changes
-
-## Checklist before requesting a review
-
-- [ ] I have performed a self-review of my code.
-- [ ] If it is a core feature, I have added thorough tests.
-- [ ] Do we need to implement analytics? if so did you add the relevant metrics to the dashboard?
-- [ ] If this PR requires public announcement, mark it with /release-notes label and add several sentences in this section.
-
-## Checklist before merging
-
-- [ ] Do not forget to reformat commit message to not include the above checklist

.github/workflows/benchmarking.yml

@@ -1,9 +1,9 @@
-name: Benchmarking
+name: benchmarking
 
 on:
   # uncomment to run on push for debugging your PR
   # push:
-  #   branches: [ your branch ]
+  #   branches: [ mybranch ]
   schedule:
     # * is a special character in YAML so you have to quote this string
     #          ┌───────────── minute (0 - 59)
@@ -11,558 +11,89 @@ on:
     #          │ │ ┌───────────── day of the month (1 - 31)
     #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
     #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
-    - cron:  '0 3 * * *' # run once a day, timezone is utc
+    - cron:  '36 7 * * *' # run once a day, timezone is utc
 
   workflow_dispatch: # adds ability to run this manually
-    inputs:
-      region_id:
-        description: 'Project region id. If not set, the default region will be used'
-        required: false
-        default: 'aws-us-east-2'
-      save_perf_report:
-        type: boolean
-        description: 'Publish perf report. If not set, the report will be published only for the main branch'
-        required: false
-
-defaults:
-  run:
-    shell: bash -euxo pipefail {0}
-
-concurrency:
-  # Allow only one workflow per any non-`main` branch.
-  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
-  cancel-in-progress: true
 
 jobs:
   bench:
-    env:
-      TEST_PG_BENCH_DURATIONS_MATRIX: "300"
-      TEST_PG_BENCH_SCALES_MATRIX: "10,100"
-      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 14
-      TEST_OUTPUT: /tmp/test_output
-      BUILD_TYPE: remote
-      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
-      PLATFORM: "neon-staging"
+    # this workflow runs on self hosteed runner
+    # it's environment is quite different from usual guthub runner
+    # probably the most important difference is that it doesnt start from clean workspace each time
+    # e g if you install system packages they are not cleaned up since you install them directly in host machine
+    # not a container or something
+    # See documentation for more info: https://docs.github.com/en/actions/hosting-your-own-runners/about-self-hosted-runners
+    runs-on: [self-hosted, zenith-benchmarker]
 
-    runs-on: [ self-hosted, us-east-2, x64 ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
+    env:
+      PG_BIN: "/usr/pgsql-13/bin"
 
     steps:
-    - uses: actions/checkout@v3
+    - name: Checkout zenith repo
+      uses: actions/checkout@v2
 
-    - name: Download Neon artifact
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-release-artifact
-        path: /tmp/neon/
-        prefix: latest
+    # actions/setup-python@v2 is not working correctly on self-hosted runners
+    # see https://github.com/actions/setup-python/issues/162
+    # and probably https://github.com/actions/setup-python/issues/162#issuecomment-865387976 in particular
+    # so the simplest solution to me is to use already installed system python and spin virtualenvs for job runs.
+    # there is Python 3.7.10 already installed on the machine so use it to install pipenv and then use pipenv's virtuealenvs
+    - name: Install pipenv & deps
+      run: |
+        python3 -m pip install --upgrade pipenv wheel
+        # since pip/pipenv caches are reused there shouldn't be any troubles with install every time
+        pipenv install
 
-    - name: Create Neon Project
-      id: create-neon-project
-      uses: ./.github/actions/neon-project-create
-      with:
-        region_id: ${{ github.event.inputs.region_id || 'aws-us-east-2' }}
-        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+    - name: Show versions
+      run: |
+        echo Python
+        python3 --version
+        pipenv run python3 --version
+        echo Pipenv
+        pipenv --version
+        echo Pgbench
+        $PG_BIN/pgbench --version
+
+    # FIXME cluster setup is skipped due to various changes in console API
+    # for now pre created cluster is used. When API gain some stability
+    # after massive changes dynamic cluster setup will be revived.
+    # So use pre created cluster. It needs to be started manually, but stop is automatic after 5 minutes of inactivity
+    - name: Setup cluster
+      env:
+        BENCHMARK_CONNSTR: "${{ secrets.BENCHMARK_STAGING_CONNSTR }}"
+      shell: bash
+      run: |
+        set -e
+
+        echo "Starting cluster"
+        # wake up the cluster
+        $PG_BIN/psql $BENCHMARK_CONNSTR -c "SELECT 1"
 
     - name: Run benchmark
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        # Set --sparse-ordering option of pytest-order plugin
-        # to ensure tests are running in order of appears in the file.
-        # It's important for test_perf_pgbench.py::test_pgbench_remote_* tests
-        extra_params: -m remote_cluster --sparse-ordering --timeout 5400 --ignore test_runner/performance/test_perf_olap.py
+      # pgbench is installed system wide from official repo
+      # https://download.postgresql.org/pub/repos/yum/13/redhat/rhel-7-x86_64/
+      # via
+      # sudo tee /etc/yum.repos.d/pgdg.repo<<EOF
+      # [pgdg13]
+      # name=PostgreSQL 13 for RHEL/CentOS 7 - x86_64
+      # baseurl=https://download.postgresql.org/pub/repos/yum/13/redhat/rhel-7-x86_64/
+      # enabled=1
+      # gpgcheck=0
+      # EOF
+      # sudo yum makecache
+      # sudo yum install postgresql13-contrib
+      # actual binaries are located in /usr/pgsql-13/bin/
       env:
-        BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-
-    - name: Delete Neon Project
-      if: ${{ always() }}
-      uses: ./.github/actions/neon-project-delete
-      with:
-        project_id: ${{ steps.create-neon-project.outputs.project_id }}
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-
-    - name: Create Allure report
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-generate
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: "Periodic perf testing: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
-
-  generate-matrices:
-    # Create matrices for the benchmarking jobs, so we run benchmarks on rds only once a week (on Saturday)
-    #
-    # Available platforms:
-    # - neon-captest-new: Freshly created project (1 CU)
-    # - neon-captest-freetier: Use freetier-sized compute (0.25 CU)
-    # - neon-captest-reuse: Reusing existing project
-    # - rds-aurora: Aurora Postgres Serverless v2 with autoscaling from 0.5 to 2 ACUs
-    # - rds-postgres: RDS Postgres db.m5.large instance (2 vCPU, 8 GiB) with gp3 EBS storage
-    runs-on: ubuntu-latest
-    outputs:
-      pgbench-compare-matrix: ${{ steps.pgbench-compare-matrix.outputs.matrix }}
-      olap-compare-matrix: ${{ steps.olap-compare-matrix.outputs.matrix }}
-
-    steps:
-    - name: Generate matrix for pgbench benchmark
-      id: pgbench-compare-matrix
+        TEST_PG_BENCH_TRANSACTIONS_MATRIX: "5000,10000,20000"
+        TEST_PG_BENCH_SCALES_MATRIX: "10,15"
+        PLATFORM: "zenith-staging"
+        BENCHMARK_CONNSTR: "${{ secrets.BENCHMARK_STAGING_CONNSTR }}"
+        REMOTE_ENV: "1" # indicate to test harness that we do not have zenith binaries locally
       run: |
-        matrix='{
-          "platform": [
-            "neon-captest-new",
-            "neon-captest-reuse",
-            "neonvm-captest-new"
-          ],
-          "db_size": [ "10gb" ],
-          "include": [{ "platform": "neon-captest-freetier",   "db_size": "3gb"  },
-                      { "platform": "neon-captest-new",        "db_size": "50gb" },
-                      { "platform": "neonvm-captest-freetier", "db_size": "3gb"  },
-                      { "platform": "neonvm-captest-new",      "db_size": "50gb" }]
-        }'
+        mkdir -p perf-report-staging
+        pipenv run pytest test_runner/performance/ -v -m "remote_cluster" --skip-interfering-proc-check --out-dir perf-report-staging
 
-        if [ "$(date +%A)" = "Saturday" ]; then
-          matrix=$(echo $matrix | jq '.include += [{ "platform": "rds-postgres", "db_size": "10gb"},
-                                                   { "platform": "rds-aurora",   "db_size": "50gb"}]')
-        fi
-
-        echo "matrix=$(echo $matrix | jq --compact-output '.')" >> $GITHUB_OUTPUT
-
-    - name: Generate matrix for OLAP benchmarks
-      id: olap-compare-matrix
-      run: |
-        matrix='{
-          "platform": [
-            "neon-captest-reuse"
-          ]
-        }'
-
-        if [ "$(date +%A)" = "Saturday" ]; then
-          matrix=$(echo $matrix | jq '.include += [{ "platform": "rds-postgres" },
-                                                   { "platform": "rds-aurora"   }]')
-        fi
-
-        echo "matrix=$(echo $matrix | jq --compact-output '.')" >> $GITHUB_OUTPUT
-
-  pgbench-compare:
-    needs: [ generate-matrices ]
-
-    strategy:
-      fail-fast: false
-      matrix: ${{fromJson(needs.generate-matrices.outputs.pgbench-compare-matrix)}}
-
-    env:
-      TEST_PG_BENCH_DURATIONS_MATRIX: "60m"
-      TEST_PG_BENCH_SCALES_MATRIX: ${{ matrix.db_size }}
-      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 14
-      TEST_OUTPUT: /tmp/test_output
-      BUILD_TYPE: remote
-      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
-      PLATFORM: ${{ matrix.platform }}
-
-    runs-on: [ self-hosted, us-east-2, x64 ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-
-    timeout-minutes: 360 # 6h
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Download Neon artifact
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-release-artifact
-        path: /tmp/neon/
-        prefix: latest
-
-    - name: Add Postgres binaries to PATH
-      run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
-    - name: Create Neon Project
-      if: contains(fromJson('["neon-captest-new", "neon-captest-freetier", "neonvm-captest-new", "neonvm-captest-freetier"]'), matrix.platform)
-      id: create-neon-project
-      uses: ./.github/actions/neon-project-create
-      with:
-        region_id: ${{ github.event.inputs.region_id || 'aws-us-east-2' }}
-        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-        compute_units: ${{ (matrix.platform == 'neon-captest-freetier' && '[0.25, 0.25]') || '[1, 1]' }}
-        provisioner: ${{ (contains(matrix.platform, 'neonvm-') && 'k8s-neonvm') || 'k8s-pod' }}
-
-    - name: Set up Connection String
-      id: set-up-connstr
-      run: |
-        case "${PLATFORM}" in
-          neon-captest-reuse)
-            CONNSTR=${{ secrets.BENCHMARK_CAPTEST_CONNSTR }}
-            ;;
-          neon-captest-new | neon-captest-freetier | neonvm-captest-new | neonvm-captest-freetier)
-            CONNSTR=${{ steps.create-neon-project.outputs.dsn }}
-            ;;
-          rds-aurora)
-            CONNSTR=${{ secrets.BENCHMARK_RDS_AURORA_CONNSTR }}
-            ;;
-          rds-postgres)
-            CONNSTR=${{ secrets.BENCHMARK_RDS_POSTGRES_CONNSTR }}
-            ;;
-          *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}"
-            exit 1
-            ;;
-        esac
-
-        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
-
-        psql ${CONNSTR} -c "SELECT version();"
-
-    - name: Benchmark init
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_init
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-
-    - name: Benchmark simple-update
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_simple_update
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-
-    - name: Benchmark select-only
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_select_only
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-
-    - name: Delete Neon Project
-      if: ${{ steps.create-neon-project.outputs.project_id && always() }}
-      uses: ./.github/actions/neon-project-delete
-      with:
-        project_id: ${{ steps.create-neon-project.outputs.project_id }}
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-
-    - name: Create Allure report
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-generate
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: "Periodic perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
-
-  clickbench-compare:
-    # ClichBench DB for rds-aurora and rds-Postgres deployed to the same clusters
-    # we use for performance testing in pgbench-compare.
-    # Run this job only when pgbench-compare is finished to avoid the intersection.
-    # We might change it after https://github.com/neondatabase/neon/issues/2900.
-    #
-    # *_CLICKBENCH_CONNSTR: Genuine ClickBench DB with ~100M rows
-    # *_CLICKBENCH_10M_CONNSTR: DB with the first 10M rows of ClickBench DB
-    if: ${{ !cancelled() }}
-    needs: [ generate-matrices, pgbench-compare ]
-
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.generate-matrices.outputs.olap-compare-matrix) }}
-
-    env:
-      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 14
-      TEST_OUTPUT: /tmp/test_output
-      BUILD_TYPE: remote
-      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
-      PLATFORM: ${{ matrix.platform }}
-
-    runs-on: [ self-hosted, us-east-2, x64 ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-
-    timeout-minutes: 360 # 6h
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Download Neon artifact
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-release-artifact
-        path: /tmp/neon/
-        prefix: latest
-
-    - name: Add Postgres binaries to PATH
-      run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
-    - name: Set up Connection String
-      id: set-up-connstr
-      run: |
-        case "${PLATFORM}" in
-          neon-captest-reuse)
-            CONNSTR=${{ secrets.BENCHMARK_CAPTEST_CLICKBENCH_10M_CONNSTR }}
-            ;;
-          rds-aurora)
-            CONNSTR=${{ secrets.BENCHMARK_RDS_AURORA_CLICKBENCH_10M_CONNSTR }}
-            ;;
-          rds-postgres)
-            CONNSTR=${{ secrets.BENCHMARK_RDS_POSTGRES_CLICKBENCH_10M_CONNSTR }}
-            ;;
-          *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
-            exit 1
-            ;;
-        esac
-
-        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
-
-        psql ${CONNSTR} -c "SELECT version();"
-
-    - name: ClickBench benchmark
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance/test_perf_olap.py
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600 -k test_clickbench
+    - name: Submit result
       env:
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-
-    - name: Create Allure report
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-generate
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: "Periodic OLAP perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
-
-  tpch-compare:
-    # TCP-H DB for rds-aurora and rds-Postgres deployed to the same clusters
-    # we use for performance testing in pgbench-compare & clickbench-compare.
-    # Run this job only when clickbench-compare is finished to avoid the intersection.
-    # We might change it after https://github.com/neondatabase/neon/issues/2900.
-    #
-    # *_TPCH_S10_CONNSTR: DB generated with scale factor 10 (~10 GB)
-    if: ${{ !cancelled() }}
-    needs: [ generate-matrices, clickbench-compare ]
-
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.generate-matrices.outputs.olap-compare-matrix) }}
-
-    env:
-      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 14
-      TEST_OUTPUT: /tmp/test_output
-      BUILD_TYPE: remote
-      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
-      PLATFORM: ${{ matrix.platform }}
-
-    runs-on: [ self-hosted, us-east-2, x64 ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-
-    timeout-minutes: 360 # 6h
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Download Neon artifact
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-release-artifact
-        path: /tmp/neon/
-        prefix: latest
-
-    - name: Add Postgres binaries to PATH
       run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
-    - name: Set up Connection String
-      id: set-up-connstr
-      run: |
-        case "${PLATFORM}" in
-          neon-captest-reuse)
-            CONNSTR=${{ secrets.BENCHMARK_CAPTEST_TPCH_S10_CONNSTR }}
-            ;;
-          rds-aurora)
-            CONNSTR=${{ secrets.BENCHMARK_RDS_AURORA_TPCH_S10_CONNSTR }}
-            ;;
-          rds-postgres)
-            CONNSTR=${{ secrets.BENCHMARK_RDS_POSTGRES_TPCH_S10_CONNSTR }}
-            ;;
-          *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
-            exit 1
-            ;;
-        esac
-
-        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
-
-        psql ${CONNSTR} -c "SELECT version();"
-
-    - name: Run TPC-H benchmark
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance/test_perf_olap.py
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600 -k test_tpch
-      env:
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-
-    - name: Create Allure report
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-generate
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: "Periodic TPC-H perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
-
-  user-examples-compare:
-    if: ${{ !cancelled() }}
-    needs: [ generate-matrices, tpch-compare ]
-
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.generate-matrices.outputs.olap-compare-matrix) }}
-
-    env:
-      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 14
-      TEST_OUTPUT: /tmp/test_output
-      BUILD_TYPE: remote
-      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
-      PLATFORM: ${{ matrix.platform }}
-
-    runs-on: [ self-hosted, us-east-2, x64 ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-
-    timeout-minutes: 360 # 6h
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Download Neon artifact
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-release-artifact
-        path: /tmp/neon/
-        prefix: latest
-
-    - name: Add Postgres binaries to PATH
-      run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
-    - name: Set up Connection String
-      id: set-up-connstr
-      run: |
-        case "${PLATFORM}" in
-          neon-captest-reuse)
-            CONNSTR=${{ secrets.BENCHMARK_USER_EXAMPLE_CAPTEST_CONNSTR }}
-            ;;
-          rds-aurora)
-            CONNSTR=${{ secrets.BENCHMARK_USER_EXAMPLE_RDS_AURORA_CONNSTR }}
-            ;;
-          rds-postgres)
-            CONNSTR=${{ secrets.BENCHMARK_USER_EXAMPLE_RDS_POSTGRES_CONNSTR }}
-            ;;
-          *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
-            exit 1
-            ;;
-        esac
-
-        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
-
-        psql ${CONNSTR} -c "SELECT version();"
-
-    - name: Run user examples
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance/test_perf_olap.py
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600 -k test_user_examples
-      env:
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-
-    - name: Create Allure report
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-generate
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: "Periodic User example perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
+        REPORT_FROM=$(realpath perf-report-staging) REPORT_TO=staging scripts/generate_and_push_perf_report.sh

.github/workflows/build_and_test.yml

@@ -1,966 +0,0 @@
-name: Build and Test
-
-on:
-  push:
-    branches:
-      - main
-      - release
-  pull_request:
-
-defaults:
-  run:
-    shell: bash -euxo pipefail {0}
-
-concurrency:
-  # Allow only one workflow per any non-`main` branch.
-  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
-  cancel-in-progress: true
-
-env:
-  RUST_BACKTRACE: 1
-  COPT: '-Werror'
-  AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-  AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-
-jobs:
-  tag:
-    runs-on: [ self-hosted, gen3, small ]
-    container: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/base:pinned
-    outputs:
-      build-tag: ${{steps.build-tag.outputs.tag}}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          fetch-depth: 0
-
-      - name: Get build tag
-        run: |
-          echo run:$GITHUB_RUN_ID
-          echo ref:$GITHUB_REF_NAME
-          echo rev:$(git rev-list --count HEAD)
-          if [[ "$GITHUB_REF_NAME" == "main" ]]; then
-            echo "tag=$(git rev-list --count HEAD)" >> $GITHUB_OUTPUT
-          elif [[ "$GITHUB_REF_NAME" == "release" ]]; then
-            echo "tag=release-$(git rev-list --count HEAD)" >> $GITHUB_OUTPUT
-          else
-            echo "GITHUB_REF_NAME (value '$GITHUB_REF_NAME') is not set to either 'main' or 'release'"
-            echo "tag=$GITHUB_RUN_ID" >> $GITHUB_OUTPUT
-          fi
-        shell: bash
-        id: build-tag
-
-  check-codestyle-python:
-    runs-on: [ self-hosted, gen3, small ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: false
-          fetch-depth: 1
-
-      - name: Cache poetry deps
-        id: cache_poetry
-        uses: actions/cache@v3
-        with:
-          path: ~/.cache/pypoetry/virtualenvs
-          key: v1-codestyle-python-deps-${{ hashFiles('poetry.lock') }}
-
-      - name: Install Python deps
-        run: ./scripts/pysync
-
-      - name: Run ruff to ensure code format
-        run: poetry run ruff .
-
-      - name: Run black to ensure code format
-        run: poetry run black --diff --check .
-
-      - name: Run mypy to check types
-        run: poetry run mypy .
-
-  check-codestyle-rust:
-    runs-on: [ self-hosted, gen3, large ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          fetch-depth: 1
-
-#      Disabled for now
-#      - name: Restore cargo deps cache
-#        id: cache_cargo
-#        uses: actions/cache@v3
-#        with:
-#          path: |
-#            !~/.cargo/registry/src
-#            ~/.cargo/git/
-#            target/
-#          key: v1-${{ runner.os }}-cargo-clippy-${{ hashFiles('rust-toolchain.toml') }}-${{ hashFiles('Cargo.lock') }}
-
-      # Some of our rust modules use FFI and need those to be checked
-      - name: Get postgres headers
-        run: make postgres-headers -j$(nproc)
-
-      # cargo hack runs the given cargo subcommand (clippy in this case) for all feature combinations.
-      # This will catch compiler & clippy warnings in all feature combinations.
-      # TODO: use cargo hack for build and test as well, but, that's quite expensive.
-      # NB: keep clippy args in sync with ./run_clippy.sh
-      - run: |
-          CLIPPY_COMMON_ARGS="$( source .neon_clippy_args; echo "$CLIPPY_COMMON_ARGS")"
-          if [ "$CLIPPY_COMMON_ARGS" = "" ]; then
-            echo "No clippy args found in .neon_clippy_args"
-            exit 1
-          fi
-          echo "CLIPPY_COMMON_ARGS=${CLIPPY_COMMON_ARGS}" >> $GITHUB_ENV
-      - name: Run cargo clippy (debug)
-        run: cargo hack --feature-powerset clippy $CLIPPY_COMMON_ARGS
-      - name: Run cargo clippy (release)
-        run: cargo hack --feature-powerset clippy --release $CLIPPY_COMMON_ARGS
-
-      # Use `${{ !cancelled() }}` to run quck tests after the longer clippy run
-      - name: Check formatting
-        if: ${{ !cancelled() }}
-        run: cargo fmt --all -- --check
-
-      # https://github.com/facebookincubator/cargo-guppy/tree/bec4e0eb29dcd1faac70b1b5360267fc02bf830e/tools/cargo-hakari#2-keep-the-workspace-hack-up-to-date-in-ci
-      - name: Check rust dependencies
-        if: ${{ !cancelled() }}
-        run: |
-          cargo hakari generate --diff  # workspace-hack Cargo.toml is up-to-date
-          cargo hakari manage-deps --dry-run  # all workspace crates depend on workspace-hack
-
-      # https://github.com/EmbarkStudios/cargo-deny
-      - name: Check rust licenses/bans/advisories/sources
-        if: ${{ !cancelled() }}
-        run: cargo deny check
-
-  build-neon:
-    runs-on: [ self-hosted, gen3, large ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-    strategy:
-      fail-fast: false
-      matrix:
-        build_type: [ debug, release ]
-    env:
-      BUILD_TYPE: ${{ matrix.build_type }}
-      GIT_VERSION: ${{ github.sha }}
-
-    steps:
-      - name: Fix git ownership
-        run: |
-          # Workaround for `fatal: detected dubious ownership in repository at ...`
-          #
-          # Use both ${{ github.workspace }} and ${GITHUB_WORKSPACE} because they're different on host and in containers
-          #   Ref https://github.com/actions/checkout/issues/785
-          #
-          git config --global --add safe.directory ${{ github.workspace }}
-          git config --global --add safe.directory ${GITHUB_WORKSPACE}
-
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          fetch-depth: 1
-
-      - name: Set pg 14 revision for caching
-        id: pg_v14_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v14) >> $GITHUB_OUTPUT
-
-      - name: Set pg 15 revision for caching
-        id: pg_v15_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v15) >> $GITHUB_OUTPUT
-
-      # Set some environment variables used by all the steps.
-      #
-      # CARGO_FLAGS is extra options to pass to "cargo build", "cargo test" etc.
-      #   It also includes --features, if any
-      #
-      # CARGO_FEATURES is passed to "cargo metadata". It is separate from CARGO_FLAGS,
-      #   because "cargo metadata" doesn't accept --release or --debug options
-      #
-      # We run tests with addtional features, that are turned off by default (e.g. in release builds), see
-      # corresponding Cargo.toml files for their descriptions.
-      - name: Set env variables
-        run: |
-          CARGO_FEATURES="--features testing"
-          if [[ $BUILD_TYPE == "debug" ]]; then
-            cov_prefix="scripts/coverage --profraw-prefix=$GITHUB_JOB --dir=/tmp/coverage run"
-            CARGO_FLAGS="--locked"
-          elif [[ $BUILD_TYPE == "release" ]]; then
-            cov_prefix=""
-            CARGO_FLAGS="--locked --release"
-          fi
-          echo "cov_prefix=${cov_prefix}" >> $GITHUB_ENV
-          echo "CARGO_FEATURES=${CARGO_FEATURES}" >> $GITHUB_ENV
-          echo "CARGO_FLAGS=${CARGO_FLAGS}" >> $GITHUB_ENV
-          echo "CARGO_HOME=${GITHUB_WORKSPACE}/.cargo" >> $GITHUB_ENV
-
-      # Disabled for now
-      # Don't include the ~/.cargo/registry/src directory. It contains just
-      # uncompressed versions of the crates in ~/.cargo/registry/cache
-      # directory, and it's faster to let 'cargo' to rebuild it from the
-      # compressed crates.
-#      - name: Cache cargo deps
-#        id: cache_cargo
-#        uses: actions/cache@v3
-#        with:
-#          path: |
-#            ~/.cargo/registry/
-#            !~/.cargo/registry/src
-#            ~/.cargo/git/
-#            target/
-#          # Fall back to older versions of the key, if no cache for current Cargo.lock was found
-#          key: |
-#            v1-${{ runner.os }}-${{ matrix.build_type }}-cargo-${{ hashFiles('rust-toolchain.toml') }}-${{ hashFiles('Cargo.lock') }}
-#            v1-${{ runner.os }}-${{ matrix.build_type }}-cargo-${{ hashFiles('rust-toolchain.toml') }}-
-
-      - name: Cache postgres v14 build
-        id: cache_pg_14
-        uses: actions/cache@v3
-        with:
-          path: pg_install/v14
-          key: v1-${{ runner.os }}-${{ matrix.build_type }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Cache postgres v15 build
-        id: cache_pg_15
-        uses: actions/cache@v3
-        with:
-          path: pg_install/v15
-          key: v1-${{ runner.os }}-${{ matrix.build_type }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Build postgres v14
-        if: steps.cache_pg_14.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v14 -j$(nproc)
-
-      - name: Build postgres v15
-        if: steps.cache_pg_15.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v15 -j$(nproc)
-
-      - name: Build neon extensions
-        run: mold -run make neon-pg-ext -j$(nproc)
-
-      - name: Run cargo build
-        run: |
-          ${cov_prefix} mold -run cargo build $CARGO_FLAGS $CARGO_FEATURES --bins --tests
-
-      - name: Run cargo test
-        run: |
-          ${cov_prefix} cargo test $CARGO_FLAGS $CARGO_FEATURES
-
-          # Run separate tests for real S3
-          export ENABLE_REAL_S3_REMOTE_STORAGE=nonempty
-          export REMOTE_STORAGE_S3_BUCKET=neon-github-public-dev
-          export REMOTE_STORAGE_S3_REGION=eu-central-1
-          # Avoid `$CARGO_FEATURES` since there's no `testing` feature in the e2e tests now
-          ${cov_prefix} cargo test $CARGO_FLAGS --package remote_storage --test test_real_s3
-
-      - name: Install rust binaries
-        run: |
-          # Install target binaries
-          mkdir -p /tmp/neon/bin/
-          binaries=$(
-            ${cov_prefix} cargo metadata $CARGO_FEATURES --format-version=1 --no-deps |
-            jq -r '.packages[].targets[] | select(.kind | index("bin")) | .name'
-          )
-          for bin in $binaries; do
-            SRC=target/$BUILD_TYPE/$bin
-            DST=/tmp/neon/bin/$bin
-            cp "$SRC" "$DST"
-          done
-
-          # Install test executables and write list of all binaries (for code coverage)
-          if [[ $BUILD_TYPE == "debug" ]]; then
-            # Keep bloated coverage data files away from the rest of the artifact
-            mkdir -p /tmp/coverage/
-
-            mkdir -p /tmp/neon/test_bin/
-
-            test_exe_paths=$(
-              ${cov_prefix} cargo test $CARGO_FLAGS $CARGO_FEATURES --message-format=json --no-run |
-              jq -r '.executable | select(. != null)'
-            )
-            for bin in $test_exe_paths; do
-              SRC=$bin
-              DST=/tmp/neon/test_bin/$(basename $bin)
-
-              # We don't need debug symbols for code coverage, so strip them out to make
-              # the artifact smaller.
-              strip "$SRC" -o "$DST"
-              echo "$DST" >> /tmp/coverage/binaries.list
-            done
-
-            for bin in $binaries; do
-              echo "/tmp/neon/bin/$bin" >> /tmp/coverage/binaries.list
-            done
-          fi
-
-      - name: Install postgres binaries
-        run: cp -a pg_install /tmp/neon/pg_install
-
-      - name: Upload Neon artifact
-        uses: ./.github/actions/upload
-        with:
-          name: neon-${{ runner.os }}-${{ matrix.build_type }}-artifact
-          path: /tmp/neon
-
-      # XXX: keep this after the binaries.list is formed, so the coverage can properly work later
-      - name: Merge and upload coverage data
-        if: matrix.build_type == 'debug'
-        uses: ./.github/actions/save-coverage-data
-
-  regress-tests:
-    runs-on: [ self-hosted, gen3, large ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      # Default shared memory is 64mb
-      options: --init --shm-size=512mb
-    needs: [ build-neon ]
-    strategy:
-      fail-fast: false
-      matrix:
-        build_type: [ debug, release ]
-        pg_version: [ v14, v15 ]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          fetch-depth: 1
-
-      - name: Pytest regression tests
-        uses: ./.github/actions/run-python-test-set
-        with:
-          build_type: ${{ matrix.build_type }}
-          test_selection: regress
-          needs_postgres_source: true
-          run_with_real_s3: true
-          real_s3_bucket: neon-github-ci-tests
-          real_s3_region: eu-central-1
-          rerun_flaky: true
-          pg_version: ${{ matrix.pg_version }}
-        env:
-          TEST_RESULT_CONNSTR: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR }}
-          CHECK_ONDISK_DATA_COMPATIBILITY: nonempty
-
-      - name: Merge and upload coverage data
-        if: matrix.build_type == 'debug' && matrix.pg_version == 'v14'
-        uses: ./.github/actions/save-coverage-data
-
-  benchmarks:
-    runs-on: [ self-hosted, gen3, small ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      # Default shared memory is 64mb
-      options: --init --shm-size=512mb
-    needs: [ build-neon ]
-    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-benchmarks')
-    strategy:
-      fail-fast: false
-      matrix:
-        build_type: [ release ]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          fetch-depth: 1
-
-      - name: Pytest benchmarks
-        uses: ./.github/actions/run-python-test-set
-        with:
-          build_type: ${{ matrix.build_type }}
-          test_selection: performance
-          run_in_parallel: false
-          save_perf_report: ${{ github.ref_name == 'main' }}
-        env:
-          VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-          PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-      # XXX: no coverage data handling here, since benchmarks are run on release builds,
-      # while coverage is currently collected for the debug ones
-
-  create-test-report:
-    runs-on: [ self-hosted, gen3, small ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-    needs: [ regress-tests, benchmarks ]
-    if: ${{ !cancelled() }}
-
-    steps:
-      - uses: actions/checkout@v3
-
-      - name: Create Allure report
-        if: ${{ !cancelled() }}
-        id: create-allure-report
-        uses: ./.github/actions/allure-report-generate
-
-      - uses: actions/github-script@v6
-        if: ${{ !cancelled() }}
-        with:
-          # Retry script for 5XX server errors: https://github.com/actions/github-script#retries
-          retries: 5
-          script: |
-            const report = {
-              reportUrl:     "${{ steps.create-allure-report.outputs.report-url }}",
-              reportJsonUrl: "${{ steps.create-allure-report.outputs.report-json-url }}",
-            }
-
-            const script = require("./scripts/comment-test-report.js")
-            await script({
-              github,
-              context,
-              fetch,
-              report,
-            })
-
-      - name: Store Allure test stat in the DB
-        if: ${{ !cancelled() && steps.create-allure-report.outputs.report-json-url }}
-        env:
-          COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-          REPORT_JSON_URL: ${{ steps.create-allure-report.outputs.report-json-url }}
-          TEST_RESULT_CONNSTR: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR }}
-        run: |
-          ./scripts/pysync
-
-          curl --fail --output suites.json "${REPORT_JSON_URL}"
-          export BUILD_TYPE=unified
-          export DATABASE_URL="$TEST_RESULT_CONNSTR"
-
-          poetry run python3 scripts/ingest_regress_test_result.py \
-            --revision ${COMMIT_SHA} \
-            --reference ${GITHUB_REF} \
-            --build-type ${BUILD_TYPE} \
-            --ingest suites.json
-
-  coverage-report:
-    runs-on: [ self-hosted, gen3, small ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-    needs: [ regress-tests ]
-    strategy:
-      fail-fast: false
-      matrix:
-        build_type: [ debug ]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          fetch-depth: 1
-
-#      Disabled for now
-#      - name: Restore cargo deps cache
-#        id: cache_cargo
-#        uses: actions/cache@v3
-#        with:
-#          path: |
-#            ~/.cargo/registry/
-#            !~/.cargo/registry/src
-#            ~/.cargo/git/
-#            target/
-#          key: v1-${{ runner.os }}-${{ matrix.build_type }}-cargo-${{ hashFiles('rust-toolchain.toml') }}-${{ hashFiles('Cargo.lock') }}
-
-      - name: Get Neon artifact
-        uses: ./.github/actions/download
-        with:
-          name: neon-${{ runner.os }}-${{ matrix.build_type }}-artifact
-          path: /tmp/neon
-
-      - name: Get coverage artifact
-        uses: ./.github/actions/download
-        with:
-          name: coverage-data-artifact
-          path: /tmp/coverage
-
-      - name: Merge coverage data
-        run: scripts/coverage "--profraw-prefix=$GITHUB_JOB" --dir=/tmp/coverage merge
-
-      - name: Build coverage report
-        env:
-          COMMIT_URL: ${{ github.server_url }}/${{ github.repository }}/commit/${{ github.event.pull_request.head.sha || github.sha }}
-        run: |
-          scripts/coverage --dir=/tmp/coverage \
-            report \
-            --input-objects=/tmp/coverage/binaries.list \
-            --commit-url=${COMMIT_URL} \
-            --format=github
-
-          scripts/coverage --dir=/tmp/coverage \
-            report \
-            --input-objects=/tmp/coverage/binaries.list \
-            --format=lcov
-
-      - name: Upload coverage report
-        id: upload-coverage-report
-        env:
-          BUCKET: neon-github-public-dev
-          COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-        run: |
-          aws s3 cp --only-show-errors --recursive /tmp/coverage/report s3://${BUCKET}/code-coverage/${COMMIT_SHA}
-
-          REPORT_URL=https://${BUCKET}.s3.amazonaws.com/code-coverage/${COMMIT_SHA}/index.html
-          echo "report-url=${REPORT_URL}" >> $GITHUB_OUTPUT
-
-      - uses: actions/github-script@v6
-        env:
-          REPORT_URL: ${{ steps.upload-coverage-report.outputs.report-url }}
-          COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-        with:
-          script: |
-            const { REPORT_URL, COMMIT_SHA } = process.env
-
-            await github.rest.repos.createCommitStatus({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              sha: `${COMMIT_SHA}`,
-              state: 'success',
-              target_url: `${REPORT_URL}`,
-              context: 'Code coverage report',
-            })
-
-  trigger-e2e-tests:
-    runs-on: [ self-hosted, gen3, small ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/base:pinned
-      options: --init
-    needs: [ promote-images, tag ]
-    steps:
-      - name: Set PR's status to pending and request a remote CI test
-        run: |
-          # For pull requests, GH Actions set "github.sha" variable to point at a fake merge commit
-          # but we need to use a real sha of a latest commit in the PR's branch for the e2e job,
-          # to place a job run status update later.
-          COMMIT_SHA=${{ github.event.pull_request.head.sha }}
-          # For non-PR kinds of runs, the above will produce an empty variable, pick the original sha value for those
-          COMMIT_SHA=${COMMIT_SHA:-${{ github.sha }}}
-
-          REMOTE_REPO="${{ github.repository_owner }}/cloud"
-
-          curl -f -X POST \
-          https://api.github.com/repos/${{ github.repository }}/statuses/$COMMIT_SHA \
-          -H "Accept: application/vnd.github.v3+json" \
-          --user "${{ secrets.CI_ACCESS_TOKEN }}" \
-          --data \
-            "{
-              \"state\": \"pending\",
-              \"context\": \"neon-cloud-e2e\",
-              \"description\": \"[$REMOTE_REPO] Remote CI job is about to start\"
-            }"
-
-          curl -f -X POST \
-          https://api.github.com/repos/$REMOTE_REPO/actions/workflows/testing.yml/dispatches \
-          -H "Accept: application/vnd.github.v3+json" \
-          --user "${{ secrets.CI_ACCESS_TOKEN }}" \
-          --data \
-            "{
-              \"ref\": \"main\",
-              \"inputs\": {
-                \"ci_job_name\": \"neon-cloud-e2e\",
-                \"commit_hash\": \"$COMMIT_SHA\",
-                \"remote_repo\": \"${{ github.repository }}\",
-                \"storage_image_tag\": \"${{ needs.tag.outputs.build-tag }}\",
-                \"compute_image_tag\": \"${{ needs.tag.outputs.build-tag }}\"
-              }
-            }"
-
-  neon-image:
-    runs-on: [ self-hosted, gen3, large ]
-    needs: [ tag ]
-    container: gcr.io/kaniko-project/executor:v1.9.2-debug
-    defaults:
-      run:
-        shell: sh -eu {0}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v1 # v3 won't work with kaniko
-        with:
-          submodules: true
-          fetch-depth: 0
-
-      - name: Configure ECR and Docker Hub login
-        run: |
-          DOCKERHUB_AUTH=$(echo -n "${{ secrets.NEON_DOCKERHUB_USERNAME }}:${{ secrets.NEON_DOCKERHUB_PASSWORD }}" | base64)
-          echo "::add-mask::${DOCKERHUB_AUTH}"
-
-          cat <<-EOF > /kaniko/.docker/config.json
-            {
-              "auths": {
-                "https://index.docker.io/v1/": {
-                  "auth": "${DOCKERHUB_AUTH}"
-                }
-              },
-              "credHelpers": {
-                "369495373322.dkr.ecr.eu-central-1.amazonaws.com": "ecr-login"
-              }
-            }
-          EOF
-
-      - name: Kaniko build neon
-        run:
-          /kaniko/executor --reproducible --snapshot-mode=redo --skip-unused-stages --cache=true
-                           --cache-repo 369495373322.dkr.ecr.eu-central-1.amazonaws.com/cache
-                           --context .
-                           --build-arg GIT_VERSION=${{ github.sha }}
-                           --build-arg REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com
-                           --destination 369495373322.dkr.ecr.eu-central-1.amazonaws.com/neon:${{needs.tag.outputs.build-tag}}
-                           --destination neondatabase/neon:${{needs.tag.outputs.build-tag}}
-
-      # Cleanup script fails otherwise - rm: cannot remove '/nvme/actions-runner/_work/_temp/_github_home/.ecr': Permission denied
-      - name: Cleanup ECR folder
-        run: rm -rf ~/.ecr
-
-  compute-tools-image:
-    runs-on: [ self-hosted, gen3, large ]
-    needs: [ tag ]
-    container: gcr.io/kaniko-project/executor:v1.9.2-debug
-    defaults:
-      run:
-        shell: sh -eu {0}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v1 # v3 won't work with kaniko
-
-      - name: Configure ECR and Docker Hub login
-        run: |
-          DOCKERHUB_AUTH=$(echo -n "${{ secrets.NEON_DOCKERHUB_USERNAME }}:${{ secrets.NEON_DOCKERHUB_PASSWORD }}" | base64)
-          echo "::add-mask::${DOCKERHUB_AUTH}"
-
-          cat <<-EOF > /kaniko/.docker/config.json
-            {
-              "auths": {
-                "https://index.docker.io/v1/": {
-                  "auth": "${DOCKERHUB_AUTH}"
-                }
-              },
-              "credHelpers": {
-                "369495373322.dkr.ecr.eu-central-1.amazonaws.com": "ecr-login"
-              }
-            }
-          EOF
-
-      - name: Kaniko build compute tools
-        run:
-          /kaniko/executor --reproducible --snapshot-mode=redo --skip-unused-stages --cache=true
-                           --cache-repo 369495373322.dkr.ecr.eu-central-1.amazonaws.com/cache
-                           --context .
-                           --build-arg GIT_VERSION=${{ github.sha }}
-                           --build-arg REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com
-                           --dockerfile Dockerfile.compute-tools
-                           --destination 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:${{needs.tag.outputs.build-tag}}
-                           --destination neondatabase/compute-tools:${{needs.tag.outputs.build-tag}}
-
-      # Cleanup script fails otherwise - rm: cannot remove '/nvme/actions-runner/_work/_temp/_github_home/.ecr': Permission denied
-      - name: Cleanup ECR folder
-        run: rm -rf ~/.ecr
-
-  compute-node-image:
-    runs-on: [ self-hosted, gen3, large ]
-    container:
-      image: gcr.io/kaniko-project/executor:v1.9.2-debug
-      # Workaround for "Resolving download.osgeo.org (download.osgeo.org)... failed: Temporary failure in name resolution.""
-      # Should be prevented by https://github.com/neondatabase/neon/issues/4281
-      options: --add-host=download.osgeo.org:140.211.15.30
-    needs: [ tag ]
-    strategy:
-      fail-fast: false
-      matrix:
-        version: [ v14, v15 ]
-    defaults:
-      run:
-        shell: sh -eu {0}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v1 # v3 won't work with kaniko
-        with:
-          submodules: true
-          fetch-depth: 0
-
-      - name: Configure ECR and Docker Hub login
-        run: |
-          DOCKERHUB_AUTH=$(echo -n "${{ secrets.NEON_DOCKERHUB_USERNAME }}:${{ secrets.NEON_DOCKERHUB_PASSWORD }}" | base64)
-          echo "::add-mask::${DOCKERHUB_AUTH}"
-
-          cat <<-EOF > /kaniko/.docker/config.json
-            {
-              "auths": {
-                "https://index.docker.io/v1/": {
-                  "auth": "${DOCKERHUB_AUTH}"
-                }
-              },
-              "credHelpers": {
-                "369495373322.dkr.ecr.eu-central-1.amazonaws.com": "ecr-login"
-              }
-            }
-          EOF
-
-      - name: Kaniko build compute node with extensions
-        run:
-          /kaniko/executor --reproducible --snapshot-mode=redo --skip-unused-stages --cache=true
-                           --cache-repo 369495373322.dkr.ecr.eu-central-1.amazonaws.com/cache
-                           --context .
-                           --build-arg GIT_VERSION=${{ github.sha }}
-                           --build-arg PG_VERSION=${{ matrix.version }}
-                           --build-arg REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com
-                           --dockerfile Dockerfile.compute-node
-                           --destination 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
-                           --destination neondatabase/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
-
-      # Cleanup script fails otherwise - rm: cannot remove '/nvme/actions-runner/_work/_temp/_github_home/.ecr': Permission denied
-      - name: Cleanup ECR folder
-        run: rm -rf ~/.ecr
-
-  vm-compute-node-image:
-    runs-on: [ self-hosted, gen3, large ]
-    needs: [ tag, compute-node-image ]
-    strategy:
-      fail-fast: false
-      matrix:
-        version: [ v14, v15 ]
-    defaults:
-      run:
-        shell: sh -eu {0}
-    env:
-      VM_BUILDER_VERSION: v0.8.0
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v1
-        with:
-          fetch-depth: 0
-
-      - name: Downloading vm-builder
-        run: |
-          curl -fL https://github.com/neondatabase/autoscaling/releases/download/$VM_BUILDER_VERSION/vm-builder -o vm-builder
-          chmod +x vm-builder
-
-      # Note: we need a separate pull step here because otherwise vm-builder will try to pull, and
-      # it won't have the proper authentication (written at v0.6.0)
-      - name: Pulling compute-node image
-        run: |
-          docker pull 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
-
-      - name: Build vm image
-        run: |
-          ./vm-builder -enable-file-cache -src=369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}} -dst=369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
-
-      - name: Pushing vm-compute-node image
-        run: |
-          docker push 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
-
-  test-images:
-    needs: [ tag, neon-image, compute-node-image, compute-tools-image ]
-    runs-on: [ self-hosted, gen3, small ]
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          fetch-depth: 0
-
-      # `neondatabase/neon` contains multiple binaries, all of them use the same input for the version into the same version formatting library.
-      # Pick pageserver as currently the only binary with extra "version" features printed in the string to verify.
-      # Regular pageserver version string looks like
-      #   Neon page server git-env:32d14403bd6ab4f4520a94cbfd81a6acef7a526c failpoints: true, features: []
-      # Bad versions might loop like:
-      #   Neon page server git-env:local failpoints: true, features: ["testing"]
-      # Ensure that we don't have bad versions.
-      - name: Verify image versions
-        shell: bash # ensure no set -e for better error messages
-        run: |
-          pageserver_version=$(docker run --rm 369495373322.dkr.ecr.eu-central-1.amazonaws.com/neon:${{needs.tag.outputs.build-tag}} "/bin/sh" "-c" "/usr/local/bin/pageserver --version")
-
-          echo "Pageserver version string: $pageserver_version"
-
-          if ! echo "$pageserver_version" | grep -qv 'git-env:local' ; then
-            echo "Pageserver version should not be the default Dockerfile one"
-            exit 1
-          fi
-
-          if ! echo "$pageserver_version" | grep -qv '"testing"' ; then
-            echo "Pageserver version should have no testing feature enabled"
-            exit 1
-          fi
-
-      - name: Verify docker-compose example
-        run: env REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com TAG=${{needs.tag.outputs.build-tag}} ./docker-compose/docker_compose_test.sh
-
-      - name: Print logs and clean up
-        if: always()
-        run: |
-          docker compose -f ./docker-compose/docker-compose.yml logs || 0
-          docker compose -f ./docker-compose/docker-compose.yml down
-
-  promote-images:
-    runs-on: [ self-hosted, gen3, small ]
-    needs: [ tag, test-images, vm-compute-node-image ]
-    container: golang:1.19-bullseye
-    # Don't add if-condition here.
-    # The job should always be run because we have dependant other jobs that shouldn't be skipped
-
-    steps:
-      - name: Install Crane & ECR helper
-        run: |
-          go install github.com/google/go-containerregistry/cmd/crane@31786c6cbb82d6ec4fb8eb79cd9387905130534e # v0.11.0
-          go install github.com/awslabs/amazon-ecr-credential-helper/ecr-login/cli/docker-credential-ecr-login@69c85dc22db6511932bbf119e1a0cc5c90c69a7f # v0.6.0
-
-      - name: Configure ECR login
-        run: |
-          mkdir /github/home/.docker/
-          echo "{\"credsStore\":\"ecr-login\"}" > /github/home/.docker/config.json
-
-      - name: Copy vm-compute-node images to Docker Hub
-        run: |
-          crane pull 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v14:${{needs.tag.outputs.build-tag}} vm-compute-node-v14
-          crane pull 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v15:${{needs.tag.outputs.build-tag}} vm-compute-node-v15
-
-      - name: Add latest tag to images
-        if: |
-          (github.ref_name == 'main' || github.ref_name == 'release') &&
-           github.event_name != 'workflow_dispatch'
-        run: |
-          crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/neon:${{needs.tag.outputs.build-tag}} latest
-          crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:${{needs.tag.outputs.build-tag}} latest
-          crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-v14:${{needs.tag.outputs.build-tag}} latest
-          crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v14:${{needs.tag.outputs.build-tag}} latest
-          crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-v15:${{needs.tag.outputs.build-tag}} latest
-          crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v15:${{needs.tag.outputs.build-tag}} latest
-
-      - name: Push images to production ECR
-        if: |
-          (github.ref_name == 'main' || github.ref_name == 'release') &&
-           github.event_name != 'workflow_dispatch'
-        run: |
-          crane copy 369495373322.dkr.ecr.eu-central-1.amazonaws.com/neon:${{needs.tag.outputs.build-tag}} 093970136003.dkr.ecr.eu-central-1.amazonaws.com/neon:latest
-          crane copy 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:${{needs.tag.outputs.build-tag}} 093970136003.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:latest
-          crane copy 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-v14:${{needs.tag.outputs.build-tag}} 093970136003.dkr.ecr.eu-central-1.amazonaws.com/compute-node-v14:latest
-          crane copy 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v14:${{needs.tag.outputs.build-tag}} 093970136003.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v14:latest
-          crane copy 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-v15:${{needs.tag.outputs.build-tag}} 093970136003.dkr.ecr.eu-central-1.amazonaws.com/compute-node-v15:latest
-          crane copy 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v15:${{needs.tag.outputs.build-tag}} 093970136003.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v15:latest
-
-      - name: Configure Docker Hub login
-        run: |
-          # ECR Credential Helper & Docker Hub don't work together in config, hence reset
-          echo "" > /github/home/.docker/config.json
-          crane auth login -u ${{ secrets.NEON_DOCKERHUB_USERNAME }} -p ${{ secrets.NEON_DOCKERHUB_PASSWORD }} index.docker.io
-
-      - name: Push vm-compute-node to Docker Hub
-        run: |
-          crane push vm-compute-node-v14 neondatabase/vm-compute-node-v14:${{needs.tag.outputs.build-tag}}
-          crane push vm-compute-node-v15 neondatabase/vm-compute-node-v15:${{needs.tag.outputs.build-tag}}
-
-      - name: Push latest tags to Docker Hub
-        if: |
-          (github.ref_name == 'main' || github.ref_name == 'release') &&
-          github.event_name != 'workflow_dispatch'
-        run: |
-          crane tag neondatabase/neon:${{needs.tag.outputs.build-tag}} latest
-          crane tag neondatabase/compute-tools:${{needs.tag.outputs.build-tag}} latest
-          crane tag neondatabase/compute-node-v14:${{needs.tag.outputs.build-tag}} latest
-          crane tag neondatabase/vm-compute-node-v14:${{needs.tag.outputs.build-tag}} latest
-          crane tag neondatabase/compute-node-v15:${{needs.tag.outputs.build-tag}} latest
-          crane tag neondatabase/vm-compute-node-v15:${{needs.tag.outputs.build-tag}} latest
-
-      - name: Cleanup ECR folder
-        run: rm -rf ~/.ecr
-
-  deploy:
-    runs-on: [ self-hosted, gen3, small ]
-    container: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/ansible:latest
-    needs: [ promote-images, tag, regress-tests ]
-    if: ( github.ref_name == 'main' || github.ref_name == 'release' ) && github.event_name != 'workflow_dispatch'
-    steps:
-      - name: Fix git ownership
-        run: |
-          # Workaround for `fatal: detected dubious ownership in repository at ...`
-          #
-          # Use both ${{ github.workspace }} and ${GITHUB_WORKSPACE} because they're different on host and in containers
-          #   Ref https://github.com/actions/checkout/issues/785
-          #
-          git config --global --add safe.directory ${{ github.workspace }}
-          git config --global --add safe.directory ${GITHUB_WORKSPACE}
-
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: false
-          fetch-depth: 0
-
-      - name: Trigger deploy workflow
-        env:
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          if [[ "$GITHUB_REF_NAME" == "main" ]]; then
-            gh workflow --repo neondatabase/aws run deploy-dev.yml --ref main -f branch=main -f dockerTag=${{needs.tag.outputs.build-tag}}
-          elif [[ "$GITHUB_REF_NAME" == "release" ]]; then
-            gh workflow --repo neondatabase/aws run deploy-prod.yml --ref main -f branch=main -f dockerTag=${{needs.tag.outputs.build-tag}} -f disclamerAcknowledged=true
-          else
-            echo "GITHUB_REF_NAME (value '$GITHUB_REF_NAME') is not set to either 'main' or 'release'"
-            exit 1
-          fi
-
-      - name: Create tag "release-${{ needs.tag.outputs.build-tag }}"
-        if: github.ref_name == 'release'
-        uses: actions/github-script@v6
-        with:
-          # Retry script for 5XX server errors: https://github.com/actions/github-script#retries
-          retries: 5
-          script: |
-            github.rest.git.createRef({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              ref: "refs/tags/release-${{ needs.tag.outputs.build-tag }}",
-              sha: context.sha,
-            })
-
-  promote-compatibility-data:
-    runs-on: [ self-hosted, gen3, small ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/base:pinned
-      options: --init
-    needs: [ promote-images, tag, regress-tests ]
-    if: github.ref_name == 'release' && github.event_name != 'workflow_dispatch'
-    steps:
-      - name: Promote compatibility snapshot for the release
-        env:
-          BUCKET: neon-github-public-dev
-          PREFIX: artifacts/latest
-        run: |
-          # Update compatibility snapshot for the release
-          for pg_version in v14 v15; do
-            for build_type in debug release; do
-              OLD_FILENAME=compatibility-snapshot-${build_type}-pg${pg_version}-${GITHUB_RUN_ID}.tar.zst
-              NEW_FILENAME=compatibility-snapshot-${build_type}-pg${pg_version}.tar.zst
-
-              time aws s3 mv --only-show-errors s3://${BUCKET}/${PREFIX}/${OLD_FILENAME} s3://${BUCKET}/${PREFIX}/${NEW_FILENAME}
-            done
-          done
-
-          # Update Neon artifact for the release (reuse already uploaded artifact)
-          for build_type in debug release; do
-            OLD_PREFIX=artifacts/${GITHUB_RUN_ID}
-            FILENAME=neon-${{ runner.os }}-${build_type}-artifact.tar.zst
-
-            S3_KEY=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${OLD_PREFIX} | jq -r '.Contents[].Key' | grep ${FILENAME} | sort --version-sort | tail -1 || true)
-            if [ -z "${S3_KEY}" ]; then
-              echo >&2 "Neither s3://${BUCKET}/${OLD_PREFIX}/${FILENAME} nor its version from previous attempts exist"
-              exit 1
-            fi
-
-            time aws s3 cp --only-show-errors s3://${BUCKET}/${S3_KEY} s3://${BUCKET}/${PREFIX}/${FILENAME}
-          done

.github/workflows/neon_extra_builds.yml

@@ -1,154 +0,0 @@
-name: Check neon with extra platform builds
-
-on:
-  push:
-    branches:
-    - main
-  pull_request:
-
-defaults:
-  run:
-    shell: bash -euxo pipefail {0}
-
-concurrency:
-  # Allow only one workflow per any non-`main` branch.
-  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
-  cancel-in-progress: true
-
-env:
-  RUST_BACKTRACE: 1
-  COPT: '-Werror'
-
-jobs:
-  check-macos-build:
-    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-extra-build-macos')
-    timeout-minutes: 90
-    runs-on: macos-latest
-
-    env:
-      # Use release build only, to have less debug info around
-      # Hence keeping target/ (and general cache size) smaller
-      BUILD_TYPE: release
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          fetch-depth: 1
-
-      - name: Install macOS postgres dependencies
-        run: brew install flex bison openssl protobuf
-
-      - name: Set pg 14 revision for caching
-        id: pg_v14_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v14) >> $GITHUB_OUTPUT
-
-      - name: Set pg 15 revision for caching
-        id: pg_v15_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v15) >> $GITHUB_OUTPUT
-
-      - name: Cache postgres v14 build
-        id: cache_pg_14
-        uses: actions/cache@v3
-        with:
-          path: pg_install/v14
-          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Cache postgres v15 build
-        id: cache_pg_15
-        uses: actions/cache@v3
-        with:
-          path: pg_install/v15
-          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Set extra env for macOS
-        run: |
-          echo 'LDFLAGS=-L/usr/local/opt/openssl@3/lib' >> $GITHUB_ENV
-          echo 'CPPFLAGS=-I/usr/local/opt/openssl@3/include' >> $GITHUB_ENV
-
-      - name: Cache cargo deps
-        uses: actions/cache@v3
-        with:
-          path: |
-            ~/.cargo/registry
-            !~/.cargo/registry/src
-            ~/.cargo/git
-            target
-          key: v1-${{ runner.os }}-cargo-${{ hashFiles('./Cargo.lock') }}-${{ hashFiles('./rust-toolchain.toml') }}-rust
-
-      - name: Build postgres v14
-        if: steps.cache_pg_14.outputs.cache-hit != 'true'
-        run: make postgres-v14 -j$(nproc)
-
-      - name: Build postgres v15
-        if: steps.cache_pg_15.outputs.cache-hit != 'true'
-        run: make postgres-v15 -j$(nproc)
-
-      - name: Build neon extensions
-        run: make neon-pg-ext -j$(nproc)
-
-      - name: Run cargo build
-        run: cargo build --all --release
-
-      - name: Check that no warnings are produced
-        run: ./run_clippy.sh
-
-  gather-rust-build-stats:
-    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-extra-build-stats')
-    runs-on: [ self-hosted, gen3, large ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
-      options: --init
-
-    env:
-      BUILD_TYPE: release
-      # remove the cachepot wrapper and build without crate caches
-      RUSTC_WRAPPER: ""
-      # build with incremental compilation produce partial results
-      # so do not attempt to cache this build, also disable the incremental compilation
-      CARGO_INCREMENTAL: 0
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          submodules: true
-          fetch-depth: 1
-
-      # Some of our rust modules use FFI and need those to be checked
-      - name: Get postgres headers
-        run: make postgres-headers -j$(nproc)
-
-      - name: Produce the build stats
-        run: cargo build --all --release --timings
-
-      - name: Upload the build stats
-        id: upload-stats
-        env:
-          BUCKET: neon-github-public-dev
-          SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-          AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-        run: |
-          REPORT_URL=https://${BUCKET}.s3.amazonaws.com/build-stats/${SHA}/${GITHUB_RUN_ID}/cargo-timing.html
-          aws s3 cp --only-show-errors ./target/cargo-timings/cargo-timing.html "s3://${BUCKET}/build-stats/${SHA}/${GITHUB_RUN_ID}/"
-          echo "report-url=${REPORT_URL}" >> $GITHUB_OUTPUT
-
-      - name: Publish build stats report
-        uses: actions/github-script@v6
-        env:
-          REPORT_URL: ${{ steps.upload-stats.outputs.report-url }}
-          SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-        with:
-          script: |
-            const { REPORT_URL, SHA } = process.env
-
-            await github.rest.repos.createCommitStatus({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              sha: `${SHA}`,
-              state: 'success',
-              target_url: `${REPORT_URL}`,
-              context: `Build stats (release)`,
-            })

.github/workflows/notifications.yml

@@ -0,0 +1,45 @@
+name: Send Notifications
+
+on:
+  push:
+    branches: [ main ]
+
+jobs:
+  send-notifications:
+    timeout-minutes: 30
+    name: send commit notifications
+    runs-on: ubuntu-latest
+
+    steps:
+
+      - name: Checkout
+        uses: actions/checkout@v2
+        with:
+          submodules: true
+          fetch-depth: 2
+
+      - name: Form variables for notification message
+        id: git_info_grab
+        run: |
+          git_stat=$(git show --stat=50)
+          git_stat="${git_stat//'%'/'%25'}"
+          git_stat="${git_stat//$'\n'/'%0A'}"
+          git_stat="${git_stat//$'\r'/'%0D'}"
+          git_stat="${git_stat// / }" # space -> 'Space En', as github tends to eat ordinary spaces
+          echo "::set-output name=git_stat::$git_stat"
+          echo "::set-output name=sha_short::$(git rev-parse --short HEAD)"
+          echo "##[set-output name=git_branch;]$(echo ${GITHUB_REF#refs/heads/})"
+
+      - name: Send notification
+        uses: appleboy/telegram-action@master
+        with:
+          to: ${{ secrets.TELEGRAM_TO }}
+          token: ${{ secrets.TELEGRAM_TOKEN }}
+          format: markdown
+          args: |
+            *@${{ github.actor }} pushed to* [${{ github.repository }}:${{steps.git_info_grab.outputs.git_branch}}](github.com/${{ github.repository }}/commit/${{steps.git_info_grab.outputs.sha_short }})
+
+            ```
+            ${{ steps.git_info_grab.outputs.git_stat }}
+            ```
+

.github/workflows/pg_clients.yml

@@ -1,99 +0,0 @@
-name: Test Postgres client libraries
-
-on:
-  schedule:
-    # * is a special character in YAML so you have to quote this string
-    #          ┌───────────── minute (0 - 59)
-    #          │ ┌───────────── hour (0 - 23)
-    #          │ │ ┌───────────── day of the month (1 - 31)
-    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
-    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
-    - cron:  '23 02 * * *' # run once a day, timezone is utc
-
-  workflow_dispatch:
-
-concurrency:
-  # Allow only one workflow per any non-`main` branch.
-  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
-  cancel-in-progress: true
-
-jobs:
-  test-postgres-client-libs:
-    # TODO: switch to gen2 runner, requires docker
-    runs-on: [ ubuntu-latest ]
-
-    env:
-      DEFAULT_PG_VERSION: 14
-      TEST_OUTPUT: /tmp/test_output
-
-    steps:
-    - name: Checkout
-      uses: actions/checkout@v3
-
-    - uses: actions/setup-python@v4
-      with:
-        python-version: 3.9
-
-    - name: Install Poetry
-      uses: snok/install-poetry@v1
-
-    - name: Cache poetry deps
-      id: cache_poetry
-      uses: actions/cache@v3
-      with:
-        path: ~/.cache/pypoetry/virtualenvs
-        key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
-
-    - name: Install Python deps
-      shell: bash -euxo pipefail {0}
-      run: ./scripts/pysync
-
-    - name: Create Neon Project
-      id: create-neon-project
-      uses: ./.github/actions/neon-project-create
-      with:
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
-
-    - name: Run pytest
-      env:
-        REMOTE_ENV: 1
-        BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
-        POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      shell: bash -euxo pipefail {0}
-      run: |
-        # Test framework expects we have psql binary;
-        # but since we don't really need it in this test, let's mock it
-        mkdir -p "$POSTGRES_DISTRIB_DIR/v${DEFAULT_PG_VERSION}/bin" && touch "$POSTGRES_DISTRIB_DIR/v${DEFAULT_PG_VERSION}/bin/psql";
-        ./scripts/pytest \
-          --junitxml=$TEST_OUTPUT/junit.xml \
-          --tb=short \
-          --verbose \
-          -m "remote_cluster" \
-          -rA "test_runner/pg_clients"
-
-    - name: Delete Neon Project
-      if: ${{ always() }}
-      uses: ./.github/actions/neon-project-delete
-      with:
-        project_id: ${{ steps.create-neon-project.outputs.project_id }}
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-
-    # We use GitHub's action upload-artifact because `ubuntu-latest` doesn't have configured AWS CLI.
-    # It will be fixed after switching to gen2 runner
-    - name: Upload python test logs
-      if: always()
-      uses: actions/upload-artifact@v3
-      with:
-        retention-days: 7
-        name: python-test-pg_clients-${{ runner.os }}-stage-logs
-        path: ${{ env.TEST_OUTPUT }}
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: "Testing Postgres clients: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}

.github/workflows/release.yml

@@ -1,34 +0,0 @@
-name: Create Release Branch
-
-on:
-  schedule:
-    - cron: '0 10 * * 2'
-  workflow_dispatch:
-
-jobs:
-  create_release_branch:
-    runs-on: [ubuntu-latest]
-
-    steps:
-    - name: Check out code
-      uses: actions/checkout@v3
-      with:
-        ref: main
-
-    - name: Get current date
-      id: date
-      run: echo "date=$(date +'%Y-%m-%d')" >> $GITHUB_OUTPUT
-
-    - name: Create release branch
-      run: git checkout -b releases/${{ steps.date.outputs.date }}
-
-    - name: Push new branch
-      run: git push origin releases/${{ steps.date.outputs.date }}
-
-    - name: Create pull request into release
-      uses: thomaseizinger/create-pull-request@e3972219c86a56550fb70708d96800d8e24ba862 # 1.3.0
-      with:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        head: releases/${{ steps.date.outputs.date }}
-        base: release
-        title: Release ${{ steps.date.outputs.date }}

.github/workflows/testing.yml

@@ -0,0 +1,74 @@
+name: Build and Test
+
+on:
+  push:
+    branches: [ main ]
+  pull_request:
+    branches: [ main ]
+
+jobs:
+  regression-check:
+    strategy:
+      matrix:
+        # If we want to duplicate this job for different
+        # Rust toolchains (e.g. nightly or 1.37.0), add them here.
+        rust_toolchain: [stable]
+        os: [ubuntu-latest]
+    timeout-minutes: 30
+    name: run regression test suite
+    runs-on: ${{ matrix.os }}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v2
+        with:
+          submodules: true
+          fetch-depth: 2
+
+      - name: install rust toolchain ${{ matrix.rust_toolchain }}
+        uses: actions-rs/toolchain@v1
+        with:
+          profile: minimal
+          toolchain: ${{ matrix.rust_toolchain }}
+          override: true
+
+      - name: Install postgres dependencies
+        run: |
+          sudo apt update
+          sudo apt install build-essential libreadline-dev zlib1g-dev flex bison libseccomp-dev
+
+      - name: Set pg revision for caching
+        id: pg_ver
+        run: echo ::set-output name=pg_rev::$(git rev-parse HEAD:vendor/postgres)
+
+      - name: Cache postgres build
+        id: cache_pg
+        uses: actions/cache@v2
+        with:
+          path: |
+            tmp_install/
+          key: ${{ runner.os }}-pg-${{ steps.pg_ver.outputs.pg_rev }}
+
+      - name: Build postgres
+        if: steps.cache_pg.outputs.cache-hit != 'true'
+        run: |
+          make postgres
+
+      - name: Cache cargo deps
+        id: cache_cargo
+        uses: actions/cache@v2
+        with:
+          path: |
+            ~/.cargo/registry
+            ~/.cargo/git
+            target
+          key: ${{ runner.os }}-cargo-${{ hashFiles('**/Cargo.lock') }}
+
+      # Use `env CARGO_INCREMENTAL=0` to mitigate https://github.com/rust-lang/rust/issues/91696 for rustc 1.57.0
+      - name: Run cargo build
+        run: |
+          env CARGO_INCREMENTAL=0 cargo build --workspace --bins --examples --tests
+
+      - name: Run cargo test
+        run: |
+          env CARGO_INCREMENTAL=0 cargo test -- --nocapture --test-threads=1

.gitignore

@@ -1,20 +1,13 @@
-/pg_install
 /target
 /tmp_check
+/tmp_install
 /tmp_check_cli
 __pycache__/
 test_output/
 .vscode
-.idea
-/.neon
-/integration_tests/.neon
+/.zenith
+/integration_tests/.zenith
 
 # Coverage
 *.profraw
 *.profdata
-
-*.key
-*.crt
-*.o
-*.so
-*.Po

.gitmodules

@@ -1,8 +1,4 @@
-[submodule "vendor/postgres-v14"]
-	path = vendor/postgres-v14
-	url = https://github.com/neondatabase/postgres.git
-	branch = REL_14_STABLE_neon
-[submodule "vendor/postgres-v15"]
-	path = vendor/postgres-v15
-	url = https://github.com/neondatabase/postgres.git
-	branch = REL_15_STABLE_neon
+[submodule "vendor/postgres"]
+	path = vendor/postgres
+	url = https://github.com/zenithdb/postgres
+	branch = main

.neon_clippy_args

@@ -1,4 +0,0 @@
-# * `-A unknown_lints` – do not warn about unknown lint suppressions
-#                        that people with newer toolchains might use
-# * `-D warnings`      - fail on any warnings (`cargo` returns non-zero exit status)
-export CLIPPY_COMMON_ARGS="--locked --workspace --all-targets -- -A unknown_lints -D warnings"

.yapfignore

@@ -0,0 +1,10 @@
+# This file is only read when `yapf` is run from this directory.
+# Hence we only top-level directories here to avoid confusion.
+# See source code for the exact file format: https://github.com/google/yapf/blob/c6077954245bc3add82dafd853a1c7305a6ebd20/yapf/yapflib/file_resources.py#L40-L43
+vendor/
+target/
+tmp_install/
+__pycache__/
+test_output/
+.zenith/
+.git/

CODEOWNERS

@@ -1,11 +0,0 @@
-/compute_tools/ @neondatabase/control-plane
-/control_plane/ @neondatabase/compute @neondatabase/storage
-/libs/pageserver_api/ @neondatabase/compute @neondatabase/storage
-/libs/postgres_ffi/ @neondatabase/compute 
-/libs/remote_storage/ @neondatabase/storage 
-/libs/safekeeper_api/ @neondatabase/safekeepers  
-/pageserver/ @neondatabase/compute @neondatabase/storage 
-/pgxn/ @neondatabase/compute
-/proxy/ @neondatabase/control-plane 
-/safekeeper/ @neondatabase/safekeepers
-/vendor/ @neondatabase/compute

CONTRIBUTING.md

@@ -2,7 +2,7 @@
 
 Howdy! Usual good software engineering practices apply. Write
 tests. Write comments. Follow standard Rust coding practices where
-possible. Use `cargo fmt` and `cargo clippy` to tidy up formatting.
+possible. Use 'cargo fmt' and 'clippy' to tidy up formatting.
 
 There are soft spots in the code, which could use cleanup,
 refactoring, additional comments, and so forth. Let's try to raise the
@@ -11,15 +11,17 @@ than it was before.
 
 ## Submitting changes
 
-1. Get at least one +1 on your PR before you push.
+1. Make a PR for every change.
+
+   Even seemingly trivial patches can break things in surprising ways.
+Use of common sense is OK. If you're only fixing a typo in a comment,
+it's probably fine to just push it. But if in doubt, open a PR.
+
+2. Get at least one +1 on your PR before you push.
 
    For simple patches, it will only take a minute for someone to review
 it.
 
-2. Don't force push small changes after making the PR ready for review.
-Doing so will force readers to re-read your entire PR, which will delay
-the review process.
-
 3. Always keep the CI green.
 
    Do not push, if the CI failed on your PR. Even if you think it's not

COPYRIGHT

@@ -0,0 +1,20 @@
+This software is licensed under the Apache 2.0 License:
+
+----------------------------------------------------------------------------
+Copyright 2021 Zenith Labs, Inc
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+----------------------------------------------------------------------------
+
+The PostgreSQL submodule in vendor/postgres is licensed under the
+PostgreSQL license. See vendor/postgres/COPYRIGHT.

Cargo.toml

@@ -1,251 +1,17 @@
 [workspace]
 members = [
-    "compute_tools",
     "control_plane",
     "pageserver",
-    "pageserver/ctl",
+    "postgres_ffi",
     "proxy",
-    "safekeeper",
-    "storage_broker",
+    "walkeeper",
     "workspace_hack",
-    "trace",
-    "libs/compute_api",
-    "libs/pageserver_api",
-    "libs/postgres_ffi",
-    "libs/safekeeper_api",
-    "libs/utils",
-    "libs/consumption_metrics",
-    "libs/postgres_backend",
-    "libs/pq_proto",
-    "libs/tenant_size_model",
-    "libs/metrics",
-    "libs/postgres_connection",
-    "libs/remote_storage",
-    "libs/tracing-utils",
-    "libs/postgres_ffi/wal_craft",
+    "zenith",
+    "zenith_metrics",
+    "zenith_utils",
 ]
 
-[workspace.package]
-edition = "2021"
-license = "Apache-2.0"
-
-## All dependency versions, used in the project
-[workspace.dependencies]
-anyhow = { version = "1.0", features = ["backtrace"] }
-async-stream = "0.3"
-async-trait = "0.1"
-atty = "0.2.14"
-aws-config = { version = "0.55", default-features = false, features=["rustls"] }
-aws-sdk-s3 = "0.27"
-aws-smithy-http = "0.55"
-aws-credential-types = "0.55"
-aws-types = "0.55"
-base64 = "0.13.0"
-bincode = "1.3"
-bindgen = "0.65"
-bstr = "1.0"
-byteorder = "1.4"
-bytes = "1.0"
-chrono = { version = "0.4", default-features = false, features = ["clock"] }
-clap = { version = "4.0", features = ["derive"] }
-close_fds = "0.3.2"
-comfy-table = "6.1"
-const_format = "0.2"
-crc32c = "0.6"
-crossbeam-utils = "0.8.5"
-either = "1.8"
-enum-map = "2.4.2"
-enumset = "1.0.12"
-fail = "0.5.0"
-fs2 = "0.4.3"
-futures = "0.3"
-futures-core = "0.3"
-futures-util = "0.3"
-git-version = "0.3"
-hashbrown = "0.13"
-hashlink = "0.8.1"
-hex = "0.4"
-hex-literal = "0.4"
-hmac = "0.12.1"
-hostname = "0.3.1"
-humantime = "2.1"
-humantime-serde = "1.1.1"
-hyper = "0.14"
-hyper-tungstenite = "0.9"
-itertools = "0.10"
-jsonwebtoken = "8"
-libc = "0.2"
-md5 = "0.7.0"
-memoffset = "0.8"
-native-tls = "0.2"
-nix = "0.26"
-notify = "5.0.0"
-num_cpus = "1.15"
-num-traits = "0.2.15"
-once_cell = "1.13"
-opentelemetry = "0.18.0"
-opentelemetry-otlp = { version = "0.11.0", default_features=false, features = ["http-proto", "trace", "http", "reqwest-client"] }
-opentelemetry-semantic-conventions = "0.10.0"
-parking_lot = "0.12"
-pin-project-lite = "0.2"
-prometheus = {version = "0.13", default_features=false, features = ["process"]} # removes protobuf dependency
-prost = "0.11"
-rand = "0.8"
-regex = "1.4"
-reqwest = { version = "0.11", default-features = false, features = ["rustls-tls"] }
-reqwest-tracing = { version = "0.4.0", features = ["opentelemetry_0_18"] }
-reqwest-middleware = "0.2.0"
-routerify = "3"
-rpds = "0.13"
-rustls = "0.20"
-rustls-pemfile = "1"
-rustls-split = "0.3"
-scopeguard = "1.1"
-sentry = { version = "0.30", default-features = false, features = ["backtrace", "contexts", "panic", "rustls", "reqwest" ] }
-serde = { version = "1.0", features = ["derive"] }
-serde_json = "1"
-serde_with = "2.0"
-sha2 = "0.10.2"
-signal-hook = "0.3"
-socket2 = "0.5"
-strum = "0.24"
-strum_macros = "0.24"
-svg_fmt = "0.4.1"
-sync_wrapper = "0.1.2"
-tar = "0.4"
-test-context = "0.1"
-thiserror = "1.0"
-tls-listener = { version = "0.6", features = ["rustls", "hyper-h1"] }
-tokio = { version = "1.17", features = ["macros"] }
-tokio-io-timeout = "1.2.0"
-tokio-postgres-rustls = "0.9.0"
-tokio-rustls = "0.23"
-tokio-stream = "0.1"
-tokio-util = { version = "0.7", features = ["io"] }
-toml = "0.7"
-toml_edit = "0.19"
-tonic = {version = "0.9", features = ["tls", "tls-roots"]}
-tracing = "0.1"
-tracing-error = "0.2.0"
-tracing-opentelemetry = "0.18.0"
-tracing-subscriber = { version = "0.3", features = ["env-filter"] }
-url = "2.2"
-uuid = { version = "1.2", features = ["v4", "serde"] }
-walkdir = "2.3.2"
-webpki-roots = "0.23"
-x509-parser = "0.15"
-
-## TODO replace this with tracing
-env_logger = "0.10"
-log = "0.4"
-
-## Libraries from neondatabase/ git forks, ideally with changes to be upstreamed
-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="1aaedab101b23f7612042850d8f2036810fa7c7f" }
-postgres-native-tls = { git = "https://github.com/neondatabase/rust-postgres.git", rev="1aaedab101b23f7612042850d8f2036810fa7c7f" }
-postgres-protocol = { git = "https://github.com/neondatabase/rust-postgres.git", rev="1aaedab101b23f7612042850d8f2036810fa7c7f" }
-postgres-types = { git = "https://github.com/neondatabase/rust-postgres.git", rev="1aaedab101b23f7612042850d8f2036810fa7c7f" }
-tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="1aaedab101b23f7612042850d8f2036810fa7c7f" }
-tokio-tar = { git = "https://github.com/neondatabase/tokio-tar.git", rev="404df61437de0feef49ba2ccdbdd94eb8ad6e142" }
-
-## Other git libraries
-heapless = { default-features=false, features=[], git = "https://github.com/japaric/heapless.git", rev = "644653bf3b831c6bb4963be2de24804acf5e5001" } # upstream release pending
-
-## Local libraries
-compute_api = { version = "0.1", path = "./libs/compute_api/" }
-consumption_metrics = { version = "0.1", path = "./libs/consumption_metrics/" }
-metrics = { version = "0.1", path = "./libs/metrics/" }
-pageserver_api = { version = "0.1", path = "./libs/pageserver_api/" }
-postgres_backend = { version = "0.1", path = "./libs/postgres_backend/" }
-postgres_connection = { version = "0.1", path = "./libs/postgres_connection/" }
-postgres_ffi = { version = "0.1", path = "./libs/postgres_ffi/" }
-pq_proto = { version = "0.1", path = "./libs/pq_proto/" }
-remote_storage = { version = "0.1", path = "./libs/remote_storage/" }
-safekeeper_api = { version = "0.1", path = "./libs/safekeeper_api" }
-storage_broker = { version = "0.1", path = "./storage_broker/" } # Note: main broker code is inside the binary crate, so linking with the library shouldn't be heavy.
-tenant_size_model = { version = "0.1", path = "./libs/tenant_size_model/" }
-tracing-utils = { version = "0.1", path = "./libs/tracing-utils/" }
-utils = { version = "0.1", path = "./libs/utils/" }
-
-## Common library dependency
-workspace_hack = { version = "0.1", path = "./workspace_hack/" }
-
-## Build dependencies
-criterion = "0.4"
-rcgen = "0.10"
-rstest = "0.17"
-tempfile = "3.4"
-tonic-build = "0.9"
-
-[patch.crates-io]
-
-# This is only needed for proxy's tests.
-# TODO: we should probably fork `tokio-postgres-rustls` instead.
-tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="1aaedab101b23f7612042850d8f2036810fa7c7f" }
-
-# Changes the MAX_THREADS limit from 4096 to 32768.
-# This is a temporary workaround for using tracing from many threads in safekeepers code,
-# until async safekeepers patch is merged to the main.
-sharded-slab = { git = "https://github.com/neondatabase/sharded-slab.git", rev="98d16753ab01c61f0a028de44167307a00efea00" }
-
-################# Binary contents sections
-
 [profile.release]
 # This is useful for profiling and, to some extent, debug.
 # Besides, debug info should not affect the performance.
 debug = true
-
-# disable debug symbols for all packages except this one to decrease binaries size
-[profile.release.package."*"]
-debug = false
-
-[profile.release-line-debug]
-inherits = "release"
-debug = 1 # true = 2 = all symbols, 1 = line only
-[profile.release-line-debug-lto]
-inherits = "release"
-debug = 1 # true = 2 = all symbols, 1 = line only
-lto = true
-
-[profile.release-line-debug-size]
-inherits = "release"
-debug = 1 # true = 2 = all symbols, 1 = line only
-opt-level = "s"
-[profile.release-line-debug-zize]
-inherits = "release"
-debug = 1 # true = 2 = all symbols, 1 = line only
-opt-level = "z"
-[profile.release-line-debug-size-lto]
-inherits = "release"
-debug = 1 # true = 2 = all symbols, 1 = line only
-opt-level = "s"
-lto = true
-[profile.release-line-debug-zize-lto]
-inherits = "release"
-debug = 1 # true = 2 = all symbols, 1 = line only
-opt-level = "z"
-lto = true
-
-[profile.release-no-debug]
-inherits = "release"
-debug = false # true = 2 = all symbols, 1 = line only
-
-[profile.release-no-debug-size]
-inherits = "release"
-debug = false # true = 2 = all symbols, 1 = line only
-opt-level = "s"
-[profile.release-no-debug-zize]
-inherits = "release"
-debug = false # true = 2 = all symbols, 1 = line only
-opt-level = "z"
-
-[profile.release-no-debug-size-lto]
-inherits = "release"
-debug = false # true = 2 = all symbols, 1 = line only
-opt-level = "s"
-lto = true
-
-[profile.release-no-debug-zize-lto]
-inherits = "release"
-debug = false # true = 2 = all symbols, 1 = line only
-opt-level = "z"
-lto = true

Dockerfile

@@ -1,97 +1,64 @@
-### Creates a storage Docker image with postgres, pageserver, safekeeper and proxy binaries.
-### The image itself is mainly used as a container for the binaries and for starting e2e tests with custom parameters.
-### By default, the binaries inside the image have some mock parameters and can start, but are not intended to be used
-### inside this image in the real deployments.
-ARG REPOSITORY=neondatabase
-ARG IMAGE=rust
-ARG TAG=pinned
-
-# Build Postgres
-FROM $REPOSITORY/$IMAGE:$TAG AS pg-build
-WORKDIR /home/nonroot
-
-COPY --chown=nonroot vendor/postgres-v14 vendor/postgres-v14
-COPY --chown=nonroot vendor/postgres-v15 vendor/postgres-v15
-COPY --chown=nonroot pgxn pgxn
-COPY --chown=nonroot Makefile Makefile
-COPY --chown=nonroot scripts/ninstall.sh scripts/ninstall.sh
-
-ENV BUILD_TYPE release
-RUN set -e \
-    && mold -run make -j $(nproc) -s neon-pg-ext \
-    && rm -rf pg_install/build \
-    && tar -C pg_install -czf /home/nonroot/postgres_install.tar.gz .
-
-# Build neon binaries
-FROM $REPOSITORY/$IMAGE:$TAG AS build
-WORKDIR /home/nonroot
-ARG GIT_VERSION=local
-
-# Enable https://github.com/paritytech/cachepot to cache Rust crates' compilation results in Docker builds.
-# Set up cachepot to use an AWS S3 bucket for cache results, to reuse it between `docker build` invocations.
-# cachepot falls back to local filesystem if S3 is misconfigured, not failing the build
-ARG RUSTC_WRAPPER=cachepot
-ENV AWS_REGION=eu-central-1
-ENV CACHEPOT_S3_KEY_PREFIX=cachepot
-ARG CACHEPOT_BUCKET=neon-github-dev
-#ARG AWS_ACCESS_KEY_ID
-#ARG AWS_SECRET_ACCESS_KEY
-
-COPY --from=pg-build /home/nonroot/pg_install/v14/include/postgresql/server pg_install/v14/include/postgresql/server
-COPY --from=pg-build /home/nonroot/pg_install/v15/include/postgresql/server pg_install/v15/include/postgresql/server
-COPY --chown=nonroot . .
-
-# Show build caching stats to check if it was used in the end.
-# Has to be the part of the same RUN since cachepot daemon is killed in the end of this RUN, losing the compilation stats.
-RUN set -e \
-    && mold -run cargo build  \
-      --bin pg_sni_router  \
-      --bin pageserver  \
-      --bin pagectl  \
-      --bin safekeeper  \
-      --bin storage_broker  \
-      --bin proxy  \
-      --locked --release \
-    && cachepot -s
-
-# Build final image
 #
-FROM debian:bullseye-slim
+# Docker image for console integration testing.
+#
+
+#
+# Build Postgres separately --- this layer will be rebuilt only if one of
+# mentioned paths will get any changes.
+#
+FROM zenithdb/build:buster AS pg-build
+WORKDIR /zenith
+COPY ./vendor/postgres vendor/postgres
+COPY ./Makefile Makefile
+ENV BUILD_TYPE release
+RUN make -j $(getconf _NPROCESSORS_ONLN) -s postgres
+RUN rm -rf postgres_install/build
+
+#
+# Build zenith binaries
+#
+# TODO: build cargo deps as separate layer. We used cargo-chef before but that was
+# net time waste in a lot of cases. Copying Cargo.lock with empty lib.rs should do the work.
+#
+FROM zenithdb/build:buster AS build
+
+ARG GIT_VERSION
+RUN if [ -z "$GIT_VERSION" ]; then echo "GIT_VERSION is reqired, use build_arg to pass it"; exit 1; fi
+
+WORKDIR /zenith
+COPY --from=pg-build /zenith/tmp_install/include/postgresql/server tmp_install/include/postgresql/server
+
+COPY . .
+RUN GIT_VERSION=$GIT_VERSION cargo build --release
+
+#
+# Copy binaries to resulting image.
+#
+FROM debian:buster-slim
 WORKDIR /data
 
-RUN set -e \
-    && apt update \
-    && apt install -y \
-        libreadline-dev \
-        libseccomp-dev \
-        openssl \
-        ca-certificates \
-    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* \
-    && useradd -d /data neon \
-    && chown -R neon:neon /data
+RUN apt-get update && apt-get -yq install libreadline-dev libseccomp-dev openssl ca-certificates && \
+    mkdir zenith_install
 
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/pg_sni_router       /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/pageserver          /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/pagectl             /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/safekeeper          /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_broker         /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/proxy               /usr/local/bin
+COPY --from=build /zenith/target/release/pageserver /usr/local/bin
+COPY --from=build /zenith/target/release/safekeeper /usr/local/bin
+COPY --from=build /zenith/target/release/proxy /usr/local/bin
+COPY --from=pg-build /zenith/tmp_install postgres_install
+COPY docker-entrypoint.sh /docker-entrypoint.sh
 
-COPY --from=pg-build /home/nonroot/pg_install/v14 /usr/local/v14/
-COPY --from=pg-build /home/nonroot/pg_install/v15 /usr/local/v15/
-COPY --from=pg-build /home/nonroot/postgres_install.tar.gz /data/
+# Remove build artifacts (~ 500 MB)
+RUN rm -rf postgres_install/build && \
+    # 'Install' Postgres binaries locally
+    cp -r postgres_install/* /usr/local/ && \
+    # Prepare an archive of Postgres binaries (should be around 11 MB)
+    # and keep it inside container for an ease of deploy pipeline.
+    cd postgres_install && tar -czf /data/postgres_install.tar.gz . && cd .. && \
+    rm -rf postgres_install
 
-# By default, pageserver uses `.neon/` working directory in WORKDIR, so create one and fill it with the dummy config.
-# Now, when `docker run ... pageserver` is run, it can start without errors, yet will have some default dummy values.
-RUN mkdir -p /data/.neon/ && chown -R neon:neon /data/.neon/ \
-    && /usr/local/bin/pageserver -D /data/.neon/ --init \
-       -c "id=1234" \
-       -c "broker_endpoint='http://storage_broker:50051'" \
-       -c "pg_distrib_dir='/usr/local/'" \
-       -c "listen_pg_addr='0.0.0.0:6400'" \
-       -c "listen_http_addr='0.0.0.0:9898'"
+RUN useradd -d /data zenith && chown -R zenith:zenith /data
 
 VOLUME ["/data"]
-USER neon
+USER zenith
 EXPOSE 6400
-EXPOSE 9898
+ENTRYPOINT ["/docker-entrypoint.sh"]
+CMD ["pageserver"]

Dockerfile.alpine

@@ -0,0 +1,95 @@
+#
+# Docker image for console integration testing.
+#
+# We may also reuse it in CI to unify installation process and as a general binaries building
+# tool for production servers.
+#
+# Dynamic linking is used for librocksdb and libstdc++ bacause librocksdb-sys calls
+# bindgen with "dynamic" feature flag. This also prevents usage of dockerhub alpine-rust
+# images which are statically linked and have guards against any dlopen. I would rather
+# prefer all static binaries so we may change the way librocksdb-sys builds or wait until
+# we will have our own storage and drop rockdb dependency.
+#
+# Cargo-chef is used to separate dependencies building from main binaries building. This
+# way `docker build` will download and install dependencies only of there are changes to
+# out Cargo.toml files.
+#
+
+
+#
+# build postgres separately -- this layer will be rebuilt only if one of
+# mentioned paths will get any changes
+#
+FROM alpine:3.13 as pg-build
+RUN apk add --update clang llvm compiler-rt compiler-rt-static lld musl-dev binutils \
+                     make bison flex readline-dev zlib-dev perl linux-headers libseccomp-dev
+WORKDIR zenith
+COPY ./vendor/postgres vendor/postgres
+COPY ./Makefile Makefile
+# Build using clang and lld
+RUN CC='clang' LD='lld' CFLAGS='-fuse-ld=lld --rtlib=compiler-rt' make postgres -j4
+
+#
+# Calculate cargo dependencies.
+# This will always run, but only generate recipe.json with list of dependencies without
+# installing them.
+#
+FROM alpine:20210212 as cargo-deps-inspect
+RUN apk add --update rust cargo
+RUN cargo install cargo-chef
+WORKDIR zenith
+COPY . .
+RUN cargo chef prepare --recipe-path recipe.json
+
+#
+# Build cargo dependencies.
+# This temp cantainner would be build only if recipe.json was changed.
+#
+FROM alpine:20210212 as deps-build
+RUN apk add --update rust cargo openssl-dev clang build-base
+# rust-rocksdb can be built against system-wide rocksdb -- that saves about
+# 10 minutes during build. Rocksdb apk package is in testing now, but use it
+# anyway. In case of any troubles we can download and build rocksdb here manually
+# (to cache it as a docker layer).
+RUN apk --no-cache --update --repository https://dl-cdn.alpinelinux.org/alpine/edge/testing add rocksdb-dev
+WORKDIR zenith
+COPY --from=pg-build /zenith/tmp_install/include/postgresql/server tmp_install/include/postgresql/server
+COPY --from=cargo-deps-inspect /root/.cargo/bin/cargo-chef /root/.cargo/bin/
+COPY --from=cargo-deps-inspect /zenith/recipe.json recipe.json
+RUN ROCKSDB_LIB_DIR=/usr/lib/ cargo chef cook --release --recipe-path recipe.json
+
+#
+# Build zenith binaries
+#
+FROM alpine:20210212 as build
+RUN apk add --update rust cargo openssl-dev clang build-base
+RUN apk --no-cache --update --repository https://dl-cdn.alpinelinux.org/alpine/edge/testing add rocksdb-dev
+WORKDIR zenith
+COPY . .
+# Copy cached dependencies
+COPY --from=pg-build /zenith/tmp_install/include/postgresql/server tmp_install/include/postgresql/server
+COPY --from=deps-build /zenith/target target
+COPY --from=deps-build /root/.cargo /root/.cargo
+RUN cargo build --release
+
+#
+# Copy binaries to resulting image.
+# build-base hare to provide libstdc++ (it will also bring gcc, but leave it this way until we figure
+# out how to statically link rocksdb or avoid it at all).
+#
+FROM alpine:3.13
+RUN apk add --update openssl build-base libseccomp-dev
+RUN apk --no-cache --update --repository https://dl-cdn.alpinelinux.org/alpine/edge/testing add rocksdb
+COPY --from=build /zenith/target/release/pageserver /usr/local/bin
+COPY --from=build /zenith/target/release/safekeeper /usr/local/bin
+COPY --from=build /zenith/target/release/proxy /usr/local/bin
+COPY --from=pg-build /zenith/tmp_install /usr/local
+COPY docker-entrypoint.sh /docker-entrypoint.sh
+
+RUN addgroup zenith && adduser -h /data -D -G zenith zenith
+VOLUME ["/data"]
+WORKDIR /data
+USER zenith
+EXPOSE 6400
+ENTRYPOINT ["/docker-entrypoint.sh"]
+CMD ["pageserver"]

Dockerfile.build

@@ -0,0 +1,15 @@
+#
+# Image with all the required dependencies to build https://github.com/zenithdb/zenith
+# and Postgres from https://github.com/zenithdb/postgres
+# Also includes some rust development and build tools.
+#
+FROM rust:slim-buster
+WORKDIR /zenith
+
+# Install postgres and zenith build dependencies
+# clang is for rocksdb
+RUN apt-get update && apt-get -yq install automake libtool build-essential bison flex libreadline-dev zlib1g-dev libxml2-dev \
+                                          libseccomp-dev pkg-config libssl-dev clang
+
+# Install rust tools
+RUN rustup component add clippy && cargo install cargo-audit

Dockerfile.compute-node

@@ -1,719 +0,0 @@
-ARG PG_VERSION
-ARG REPOSITORY=neondatabase
-ARG IMAGE=rust
-ARG TAG=pinned
-
-#########################################################################################
-#
-# Layer "build-deps"
-#
-#########################################################################################
-FROM debian:bullseye-slim AS build-deps
-RUN apt update &&  \
-    apt install -y git autoconf automake libtool build-essential bison flex libreadline-dev \
-    zlib1g-dev libxml2-dev libcurl4-openssl-dev libossp-uuid-dev wget pkg-config libssl-dev \
-    libicu-dev libxslt1-dev liblz4-dev libzstd-dev
-
-#########################################################################################
-#
-# Layer "pg-build"
-# Build Postgres from the neon postgres repository.
-#
-#########################################################################################
-FROM build-deps AS pg-build
-ARG PG_VERSION
-COPY vendor/postgres-${PG_VERSION} postgres
-RUN cd postgres && \
-    export CONFIGURE_CMD="./configure CFLAGS='-O2 -g3' --enable-debug --with-openssl --with-uuid=ossp \
-    --with-icu --with-libxml --with-libxslt --with-lz4" && \
-    if [ "${PG_VERSION}" != "v14" ]; then \
-        # zstd is available only from PG15
-        export CONFIGURE_CMD="${CONFIGURE_CMD} --with-zstd"; \
-    fi && \
-    eval $CONFIGURE_CMD && \
-    make MAKELEVEL=0 -j $(getconf _NPROCESSORS_ONLN) -s install && \
-    make MAKELEVEL=0 -j $(getconf _NPROCESSORS_ONLN) -s -C contrib/ install && \
-    # Install headers
-    make MAKELEVEL=0 -j $(getconf _NPROCESSORS_ONLN) -s -C src/include install && \
-    make MAKELEVEL=0 -j $(getconf _NPROCESSORS_ONLN) -s -C src/interfaces/libpq install && \
-    # Enable some of contrib extensions
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/autoinc.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/bloom.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/earthdistance.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/insert_username.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/intagg.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/moddatetime.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_stat_statements.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgrowlocks.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgstattuple.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/refint.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/xml2.control
-
-#########################################################################################
-#
-# Layer "postgis-build"
-# Build PostGIS from the upstream PostGIS mirror.
-#
-#########################################################################################
-FROM build-deps AS postgis-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-RUN apt update && \
-    apt install -y cmake gdal-bin libboost-dev libboost-thread-dev libboost-filesystem-dev \
-    libboost-system-dev libboost-iostreams-dev libboost-program-options-dev libboost-timer-dev \
-    libcgal-dev libgdal-dev libgmp-dev libmpfr-dev libopenscenegraph-dev libprotobuf-c-dev \
-    protobuf-c-compiler xsltproc
-
-# SFCGAL > 1.3 requires CGAL > 5.2, Bullseye's libcgal-dev is 5.2
-RUN wget https://gitlab.com/Oslandia/SFCGAL/-/archive/v1.3.10/SFCGAL-v1.3.10.tar.gz -O SFCGAL.tar.gz && \
-    echo "4e39b3b2adada6254a7bdba6d297bb28e1a9835a9f879b74f37e2dab70203232 SFCGAL.tar.gz" | sha256sum --check && \
-    mkdir sfcgal-src && cd sfcgal-src && tar xvzf ../SFCGAL.tar.gz --strip-components=1 -C . && \
-    cmake -DCMAKE_BUILD_TYPE=Release . && make -j $(getconf _NPROCESSORS_ONLN) && \
-    DESTDIR=/sfcgal make install -j $(getconf _NPROCESSORS_ONLN) && \
-    make clean && cp -R /sfcgal/* /
-
-ENV PATH "/usr/local/pgsql/bin:$PATH"
-
-RUN wget https://download.osgeo.org/postgis/source/postgis-3.3.2.tar.gz -O postgis.tar.gz && \
-    echo "9a2a219da005a1730a39d1959a1c7cec619b1efb009b65be80ffc25bad299068 postgis.tar.gz" | sha256sum --check && \
-    mkdir postgis-src && cd postgis-src && tar xvzf ../postgis.tar.gz --strip-components=1 -C . && \
-    ./autogen.sh && \
-    ./configure --with-sfcgal=/usr/local/bin/sfcgal-config && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    cd extensions/postgis && \
-    make clean && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis_raster.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis_sfcgal.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis_tiger_geocoder.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis_topology.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/address_standardizer.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/address_standardizer_data_us.control
-
-RUN wget https://github.com/pgRouting/pgrouting/archive/v3.4.2.tar.gz -O pgrouting.tar.gz && \
-    echo "cac297c07d34460887c4f3b522b35c470138760fe358e351ad1db4edb6ee306e pgrouting.tar.gz" | sha256sum --check && \
-    mkdir pgrouting-src && cd pgrouting-src && tar xvzf ../pgrouting.tar.gz --strip-components=1 -C . && \
-    mkdir build && \
-    cd build && \
-    cmake -DCMAKE_BUILD_TYPE=Release .. && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgrouting.control
-
-#########################################################################################
-#
-# Layer "plv8-build"
-# Build plv8
-#
-#########################################################################################
-FROM build-deps AS plv8-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-RUN apt update && \
-    apt install -y ninja-build python3-dev libncurses5 binutils clang
-
-RUN wget https://github.com/plv8/plv8/archive/refs/tags/v3.1.5.tar.gz -O plv8.tar.gz && \
-    echo "1e108d5df639e4c189e1c5bdfa2432a521c126ca89e7e5a969d46899ca7bf106 plv8.tar.gz" | sha256sum --check && \
-    mkdir plv8-src && cd plv8-src && tar xvzf ../plv8.tar.gz --strip-components=1 -C . && \
-    export PATH="/usr/local/pgsql/bin:$PATH" && \
-    make DOCKER=1 -j $(getconf _NPROCESSORS_ONLN) install && \
-    rm -rf /plv8-* && \
-    find /usr/local/pgsql/ -name "plv8-*.so" | xargs strip && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/plv8.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/plcoffee.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/plls.control
-
-#########################################################################################
-#
-# Layer "h3-pg-build"
-# Build h3_pg
-#
-#########################################################################################
-FROM build-deps AS h3-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-# packaged cmake is too old
-RUN wget https://github.com/Kitware/CMake/releases/download/v3.24.2/cmake-3.24.2-linux-x86_64.sh \
-      -q -O /tmp/cmake-install.sh \
-      && echo "739d372726cb23129d57a539ce1432453448816e345e1545f6127296926b6754 /tmp/cmake-install.sh" | sha256sum --check \
-      && chmod u+x /tmp/cmake-install.sh \
-      && /tmp/cmake-install.sh --skip-license --prefix=/usr/local/ \
-      && rm /tmp/cmake-install.sh
-
-RUN wget https://github.com/uber/h3/archive/refs/tags/v4.1.0.tar.gz -O h3.tar.gz && \
-    echo "ec99f1f5974846bde64f4513cf8d2ea1b8d172d2218ab41803bf6a63532272bc h3.tar.gz" | sha256sum --check && \
-    mkdir h3-src && cd h3-src && tar xvzf ../h3.tar.gz --strip-components=1 -C . && \
-    mkdir build && cd build && \
-    cmake .. -DCMAKE_BUILD_TYPE=Release && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    DESTDIR=/h3 make install && \
-    cp -R /h3/usr / && \
-    rm -rf build
-
-RUN wget https://github.com/zachasme/h3-pg/archive/refs/tags/v4.1.2.tar.gz -O h3-pg.tar.gz && \
-    echo "c135aa45999b2ad1326d2537c1cadef96d52660838e4ca371706c08fdea1a956 h3-pg.tar.gz" | sha256sum --check && \
-    mkdir h3-pg-src && cd h3-pg-src && tar xvzf ../h3-pg.tar.gz --strip-components=1 -C . && \
-    export PATH="/usr/local/pgsql/bin:$PATH" && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/h3.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/h3_postgis.control
-
-#########################################################################################
-#
-# Layer "unit-pg-build"
-# compile unit extension
-#
-#########################################################################################
-FROM build-deps AS unit-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/df7cb/postgresql-unit/archive/refs/tags/7.7.tar.gz -O postgresql-unit.tar.gz && \
-    echo "411d05beeb97e5a4abf17572bfcfbb5a68d98d1018918feff995f6ee3bb03e79 postgresql-unit.tar.gz" | sha256sum --check && \
-    mkdir postgresql-unit-src && cd postgresql-unit-src && tar xvzf ../postgresql-unit.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    # unit extension's "create extension" script relies on absolute install path to fill some reference tables.
-    # We move the extension from '/usr/local/pgsql/' to '/usr/local/'  after it is build. So we need to adjust the path.
-    # This one-liner removes pgsql/ part of the path.
-    # NOTE: Other extensions that rely on MODULEDIR variable after building phase will need the same fix.
-    find /usr/local/pgsql/share/extension/ -name "unit*.sql" -print0 | xargs -0 sed -i "s|pgsql/||g" && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/unit.control
-
-#########################################################################################
-#
-# Layer "vector-pg-build"
-# compile pgvector extension
-#
-#########################################################################################
-FROM build-deps AS vector-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/pgvector/pgvector/archive/refs/tags/v0.4.0.tar.gz -O pgvector.tar.gz && \
-    echo "b76cf84ddad452cc880a6c8c661d137ddd8679c000a16332f4f03ecf6e10bcc8 pgvector.tar.gz" | sha256sum --check && \
-    mkdir pgvector-src && cd pgvector-src && tar xvzf ../pgvector.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/vector.control
-
-#########################################################################################
-#
-# Layer "pgjwt-pg-build"
-# compile pgjwt extension
-#
-#########################################################################################
-FROM build-deps AS pgjwt-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-# 9742dab1b2f297ad3811120db7b21451bca2d3c9 made on 13/11/2021
-RUN wget https://github.com/michelp/pgjwt/archive/9742dab1b2f297ad3811120db7b21451bca2d3c9.tar.gz -O pgjwt.tar.gz && \
-    echo "cfdefb15007286f67d3d45510f04a6a7a495004be5b3aecb12cda667e774203f pgjwt.tar.gz" | sha256sum --check && \
-    mkdir pgjwt-src && cd pgjwt-src && tar xvzf ../pgjwt.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgjwt.control
-
-#########################################################################################
-#
-# Layer "hypopg-pg-build"
-# compile hypopg extension
-#
-#########################################################################################
-FROM build-deps AS hypopg-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/HypoPG/hypopg/archive/refs/tags/1.3.1.tar.gz -O hypopg.tar.gz && \
-    echo "e7f01ee0259dc1713f318a108f987663d60f3041948c2ada57a94b469565ca8e hypopg.tar.gz" | sha256sum --check && \
-    mkdir hypopg-src && cd hypopg-src && tar xvzf ../hypopg.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/hypopg.control
-
-#########################################################################################
-#
-# Layer "pg-hashids-pg-build"
-# compile pg_hashids extension
-#
-#########################################################################################
-FROM build-deps AS pg-hashids-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/iCyberon/pg_hashids/archive/refs/tags/v1.2.1.tar.gz -O pg_hashids.tar.gz && \
-    echo "74576b992d9277c92196dd8d816baa2cc2d8046fe102f3dcd7f3c3febed6822a pg_hashids.tar.gz" | sha256sum --check && \
-    mkdir pg_hashids-src && cd pg_hashids-src && tar xvzf ../pg_hashids.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_hashids.control
-
-#########################################################################################
-#
-# Layer "rum-pg-build"
-# compile rum extension
-#
-#########################################################################################
-FROM build-deps AS rum-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/postgrespro/rum/archive/refs/tags/1.3.13.tar.gz -O rum.tar.gz && \
-    echo "6ab370532c965568df6210bd844ac6ba649f53055e48243525b0b7e5c4d69a7d rum.tar.gz" | sha256sum --check && \
-    mkdir rum-src && cd rum-src && tar xvzf ../rum.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/rum.control
-
-#########################################################################################
-#
-# Layer "pgtap-pg-build"
-# compile pgTAP extension
-#
-#########################################################################################
-FROM build-deps AS pgtap-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/theory/pgtap/archive/refs/tags/v1.2.0.tar.gz -O pgtap.tar.gz && \
-    echo "9c7c3de67ea41638e14f06da5da57bac6f5bd03fea05c165a0ec862205a5c052 pgtap.tar.gz" | sha256sum --check && \
-    mkdir pgtap-src && cd pgtap-src && tar xvzf ../pgtap.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgtap.control
-
-#########################################################################################
-#
-# Layer "ip4r-pg-build"
-# compile ip4r extension
-#
-#########################################################################################
-FROM build-deps AS ip4r-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/RhodiumToad/ip4r/archive/refs/tags/2.4.1.tar.gz -O ip4r.tar.gz && \
-    echo "78b9f0c1ae45c22182768fe892a32d533c82281035e10914111400bf6301c726 ip4r.tar.gz" | sha256sum --check && \
-    mkdir ip4r-src && cd ip4r-src && tar xvzf ../ip4r.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/ip4r.control
-
-#########################################################################################
-#
-# Layer "prefix-pg-build"
-# compile Prefix extension
-#
-#########################################################################################
-FROM build-deps AS prefix-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/dimitri/prefix/archive/refs/tags/v1.2.9.tar.gz -O prefix.tar.gz && \
-    echo "38d30a08d0241a8bbb8e1eb8f0152b385051665a8e621c8899e7c5068f8b511e prefix.tar.gz" | sha256sum --check && \
-    mkdir prefix-src && cd prefix-src && tar xvzf ../prefix.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/prefix.control
-
-#########################################################################################
-#
-# Layer "hll-pg-build"
-# compile hll extension
-#
-#########################################################################################
-FROM build-deps AS hll-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/citusdata/postgresql-hll/archive/refs/tags/v2.17.tar.gz -O hll.tar.gz && \
-    echo "9a18288e884f197196b0d29b9f178ba595b0dfc21fbf7a8699380e77fa04c1e9 hll.tar.gz" | sha256sum --check && \
-    mkdir hll-src && cd hll-src && tar xvzf ../hll.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/hll.control
-
-#########################################################################################
-#
-# Layer "plpgsql-check-pg-build"
-# compile plpgsql_check extension
-#
-#########################################################################################
-FROM build-deps AS plpgsql-check-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN wget https://github.com/okbob/plpgsql_check/archive/refs/tags/v2.3.2.tar.gz -O plpgsql_check.tar.gz && \
-    echo "9d81167c4bbeb74eebf7d60147b21961506161addc2aee537f95ad8efeae427b plpgsql_check.tar.gz" | sha256sum --check && \
-    mkdir plpgsql_check-src && cd plpgsql_check-src && tar xvzf ../plpgsql_check.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
-    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/plpgsql_check.control
-
-#########################################################################################
-#
-# Layer "timescaledb-pg-build"
-# compile timescaledb extension
-#
-#########################################################################################
-FROM build-deps AS timescaledb-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-ENV PATH "/usr/local/pgsql/bin:$PATH"
-
-RUN apt-get update && \
-    apt-get install -y cmake && \
-    wget https://github.com/timescale/timescaledb/archive/refs/tags/2.10.1.tar.gz -O timescaledb.tar.gz && \
-    echo "6fca72a6ed0f6d32d2b3523951ede73dc5f9b0077b38450a029a5f411fdb8c73 timescaledb.tar.gz" | sha256sum --check && \
-    mkdir timescaledb-src && cd timescaledb-src && tar xvzf ../timescaledb.tar.gz --strip-components=1 -C . && \
-    ./bootstrap -DSEND_TELEMETRY_DEFAULT:BOOL=OFF -DUSE_TELEMETRY:BOOL=OFF -DAPACHE_ONLY:BOOL=ON -DCMAKE_BUILD_TYPE=Release && \
-    cd build && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make install -j $(getconf _NPROCESSORS_ONLN) && \
-    echo "trusted = true" >> /usr/local/pgsql/share/extension/timescaledb.control
-
-#########################################################################################
-#
-# Layer "pg-hint-plan-pg-build"
-# compile pg_hint_plan extension
-#
-#########################################################################################
-FROM build-deps AS pg-hint-plan-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-ARG PG_VERSION
-ENV PATH "/usr/local/pgsql/bin:$PATH"
-
-RUN case "${PG_VERSION}" in \
-      "v14") \
-        export PG_HINT_PLAN_VERSION=14_1_4_1 \
-        export PG_HINT_PLAN_CHECKSUM=c3501becf70ead27f70626bce80ea401ceac6a77e2083ee5f3ff1f1444ec1ad1 \
-        ;; \
-      "v15") \
-        export PG_HINT_PLAN_VERSION=15_1_5_0 \
-        export PG_HINT_PLAN_CHECKSUM=564cbbf4820973ffece63fbf76e3c0af62c4ab23543142c7caaa682bc48918be \
-        ;; \
-      *) \
-        echo "Export the valid PG_HINT_PLAN_VERSION variable" && exit 1 \
-        ;; \
-    esac && \
-    wget https://github.com/ossc-db/pg_hint_plan/archive/refs/tags/REL${PG_HINT_PLAN_VERSION}.tar.gz -O pg_hint_plan.tar.gz && \
-    echo "${PG_HINT_PLAN_CHECKSUM} pg_hint_plan.tar.gz" | sha256sum --check && \
-    mkdir pg_hint_plan-src && cd pg_hint_plan-src && tar xvzf ../pg_hint_plan.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make install -j $(getconf _NPROCESSORS_ONLN) && \
-    echo "trusted = true" >> /usr/local/pgsql/share/extension/pg_hint_plan.control
-
-#########################################################################################
-#
-# Layer "kq-imcx-pg-build"
-# compile kq_imcx extension
-#
-#########################################################################################
-FROM build-deps AS kq-imcx-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-ENV PATH "/usr/local/pgsql/bin/:$PATH"
-RUN apt-get update && \
-    apt-get install -y git libgtk2.0-dev libpq-dev libpam-dev libxslt-dev libkrb5-dev cmake && \
-    wget https://github.com/ketteq-neon/postgres-exts/archive/e0bd1a9d9313d7120c1b9c7bb15c48c0dede4c4e.tar.gz -O kq_imcx.tar.gz && \
-    echo "dc93a97ff32d152d32737ba7e196d9687041cda15e58ab31344c2f2de8855336 kq_imcx.tar.gz" | sha256sum --check && \
-    mkdir kq_imcx-src && cd kq_imcx-src && tar xvzf ../kq_imcx.tar.gz --strip-components=1 -C . && \
-    mkdir build && \
-    cd build && \
-    cmake -DCMAKE_BUILD_TYPE=Release .. && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/kq_imcx.control
-
-#########################################################################################
-#
-# Layer "pg-cron-pg-build"
-# compile pg_cron extension
-#
-#########################################################################################
-FROM build-deps AS pg-cron-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-ENV PATH "/usr/local/pgsql/bin/:$PATH"
-RUN wget https://github.com/citusdata/pg_cron/archive/refs/tags/v1.5.2.tar.gz -O pg_cron.tar.gz && \
-    echo "6f7f0980c03f1e2a6a747060e67bf4a303ca2a50e941e2c19daeed2b44dec744 pg_cron.tar.gz" | sha256sum --check && \
-    mkdir pg_cron-src && cd pg_cron-src && tar xvzf ../pg_cron.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_cron.control
-
-#########################################################################################
-#
-# Layer "rdkit-pg-build"
-# compile rdkit extension
-#
-#########################################################################################
-FROM build-deps AS rdkit-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN apt-get update && \
-    apt-get install -y \
-        cmake \
-        libboost-iostreams1.74-dev \
-        libboost-regex1.74-dev \
-        libboost-serialization1.74-dev \
-        libboost-system1.74-dev \
-        libeigen3-dev \
-        libfreetype6-dev
-
-ENV PATH "/usr/local/pgsql/bin/:/usr/local/pgsql/:$PATH"
-RUN wget https://github.com/rdkit/rdkit/archive/refs/tags/Release_2023_03_1.tar.gz -O rdkit.tar.gz && \
-    echo "db346afbd0ba52c843926a2a62f8a38c7b774ffab37eaf382d789a824f21996c rdkit.tar.gz" | sha256sum --check && \
-    mkdir rdkit-src && cd rdkit-src && tar xvzf ../rdkit.tar.gz --strip-components=1 -C . && \
-    cmake \
-        -D RDK_BUILD_CAIRO_SUPPORT=OFF \
-        -D RDK_BUILD_INCHI_SUPPORT=ON \
-        -D RDK_BUILD_AVALON_SUPPORT=ON \
-        -D RDK_BUILD_PYTHON_WRAPPERS=OFF \
-        -D RDK_BUILD_DESCRIPTORS3D=OFF \
-        -D RDK_BUILD_FREESASA_SUPPORT=OFF \
-        -D RDK_BUILD_COORDGEN_SUPPORT=ON \
-        -D RDK_BUILD_MOLINTERCHANGE_SUPPORT=OFF \
-        -D RDK_BUILD_YAEHMOP_SUPPORT=OFF \
-        -D RDK_BUILD_STRUCTCHECKER_SUPPORT=OFF \
-        -D RDK_USE_URF=OFF \
-        -D RDK_BUILD_PGSQL=ON \
-        -D RDK_PGSQL_STATIC=ON \
-        -D PostgreSQL_CONFIG=pg_config \
-        -D PostgreSQL_INCLUDE_DIR=`pg_config --includedir` \
-        -D PostgreSQL_TYPE_INCLUDE_DIR=`pg_config --includedir-server` \
-        -D PostgreSQL_LIBRARY_DIR=`pg_config --libdir` \
-        -D RDK_INSTALL_INTREE=OFF \
-        -D CMAKE_BUILD_TYPE=Release \
-        . && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/rdkit.control
-
-#########################################################################################
-#
-# Layer "rust extensions"
-# This layer is used to build `pgx` deps
-#
-#########################################################################################
-FROM build-deps AS rust-extensions-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-RUN apt-get update && \
-    apt-get install -y curl libclang-dev cmake && \
-    useradd -ms /bin/bash nonroot -b /home
-
-ENV HOME=/home/nonroot
-ENV PATH="/home/nonroot/.cargo/bin:/usr/local/pgsql/bin/:$PATH"
-USER nonroot
-WORKDIR /home/nonroot
-ARG PG_VERSION
-
-RUN curl -sSO https://static.rust-lang.org/rustup/dist/$(uname -m)-unknown-linux-gnu/rustup-init && \
-    chmod +x rustup-init && \
-    ./rustup-init -y --no-modify-path --profile minimal --default-toolchain stable && \
-    rm rustup-init && \
-    cargo install --locked --version 0.7.3 cargo-pgx && \
-    /bin/bash -c 'cargo pgx init --pg${PG_VERSION:1}=/usr/local/pgsql/bin/pg_config'
-
-USER root
-
-#########################################################################################
-#
-# Layer "pg-jsonschema-pg-build"
-# Compile "pg_jsonschema" extension
-#
-#########################################################################################
-
-FROM rust-extensions-build AS pg-jsonschema-pg-build
-
-# caeab60d70b2fd3ae421ec66466a3abbb37b7ee6 made on 06/03/2023
-# there is no release tag yet, but we need it due to the superuser fix in the control file, switch to git tag after release >= 0.1.5
-RUN wget https://github.com/supabase/pg_jsonschema/archive/caeab60d70b2fd3ae421ec66466a3abbb37b7ee6.tar.gz -O pg_jsonschema.tar.gz && \
-    echo "54129ce2e7ee7a585648dbb4cef6d73f795d94fe72f248ac01119992518469a4 pg_jsonschema.tar.gz" | sha256sum --check && \
-    mkdir pg_jsonschema-src && cd pg_jsonschema-src && tar xvzf ../pg_jsonschema.tar.gz --strip-components=1 -C . && \
-    sed -i 's/pgx = "0.7.1"/pgx = { version = "0.7.3", features = [ "unsafe-postgres" ] }/g' Cargo.toml && \
-    cargo pgx install --release && \
-    echo "trusted = true" >> /usr/local/pgsql/share/extension/pg_jsonschema.control
-
-#########################################################################################
-#
-# Layer "pg-graphql-pg-build"
-# Compile "pg_graphql" extension
-#
-#########################################################################################
-
-FROM rust-extensions-build AS pg-graphql-pg-build
-
-# b4988843647450a153439be367168ed09971af85 made on 22/02/2023 (from remove-pgx-contrib-spiext branch)
-# Currently pgx version bump to >= 0.7.2  causes "call to unsafe function" compliation errors in
-# pgx-contrib-spiext. There is a branch that removes that dependency, so use it. It is on the
-# same 1.1 version we've used before.
-RUN wget https://github.com/yrashk/pg_graphql/archive/b4988843647450a153439be367168ed09971af85.tar.gz -O pg_graphql.tar.gz && \
-    echo "0c7b0e746441b2ec24187d0e03555faf935c2159e2839bddd14df6dafbc8c9bd pg_graphql.tar.gz" | sha256sum --check && \
-    mkdir pg_graphql-src && cd pg_graphql-src && tar xvzf ../pg_graphql.tar.gz --strip-components=1 -C . && \
-    sed -i 's/pgx = "~0.7.1"/pgx = { version = "0.7.3", features = [ "unsafe-postgres" ] }/g' Cargo.toml && \
-    sed -i 's/pgx-tests = "~0.7.1"/pgx-tests = "0.7.3"/g' Cargo.toml && \
-    cargo pgx install --release && \
-    # it's needed to enable extension because it uses untrusted C language
-    sed -i 's/superuser = false/superuser = true/g' /usr/local/pgsql/share/extension/pg_graphql.control && \
-    echo "trusted = true" >> /usr/local/pgsql/share/extension/pg_graphql.control
-
-#########################################################################################
-#
-# Layer "pg-tiktoken-build"
-# Compile "pg_tiktoken" extension
-#
-#########################################################################################
-
-FROM rust-extensions-build AS pg-tiktoken-pg-build
-
-# 801f84f08c6881c8aa30f405fafbf00eec386a72 made on 10/03/2023
-RUN wget https://github.com/kelvich/pg_tiktoken/archive/801f84f08c6881c8aa30f405fafbf00eec386a72.tar.gz -O pg_tiktoken.tar.gz && \
-    echo "52f60ac800993a49aa8c609961842b611b6b1949717b69ce2ec9117117e16e4a pg_tiktoken.tar.gz" | sha256sum --check && \
-    mkdir pg_tiktoken-src && cd pg_tiktoken-src && tar xvzf ../pg_tiktoken.tar.gz --strip-components=1 -C . && \
-    cargo pgx install --release && \
-    echo "trusted = true" >> /usr/local/pgsql/share/extension/pg_tiktoken.control
-
-#########################################################################################
-#
-# Layer "pg-pgx-ulid-build"
-# Compile "pgx_ulid" extension
-#
-#########################################################################################
-
-FROM rust-extensions-build AS pg-pgx-ulid-build
-
-RUN wget https://github.com/pksunkara/pgx_ulid/archive/refs/tags/v0.1.0.tar.gz -O pgx_ulid.tar.gz && \
-    echo "908b7358e6f846e87db508ae5349fb56a88ee6305519074b12f3d5b0ff09f791 pgx_ulid.tar.gz" | sha256sum --check && \
-    mkdir pgx_ulid-src && cd pgx_ulid-src && tar xvzf ../pgx_ulid.tar.gz --strip-components=1 -C . && \
-    sed -i 's/pgx        = "=0.7.3"/pgx = { version = "0.7.3", features = [ "unsafe-postgres" ] }/g' Cargo.toml && \
-    cargo pgx install --release && \
-    echo "trusted = true" >> /usr/local/pgsql/share/extension/ulid.control
-
-#########################################################################################
-#
-# Layer "neon-pg-ext-build"
-# compile neon extensions
-#
-#########################################################################################
-FROM build-deps AS neon-pg-ext-build
-COPY --from=postgis-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=postgis-build /sfcgal/* /
-COPY --from=plv8-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=h3-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=h3-pg-build /h3/usr /
-COPY --from=unit-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=vector-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pgjwt-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-jsonschema-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-graphql-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-tiktoken-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=hypopg-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-hashids-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=rum-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pgtap-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=ip4r-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=prefix-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=hll-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=plpgsql-check-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=timescaledb-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-hint-plan-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=kq-imcx-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-cron-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-pgx-ulid-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=rdkit-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY pgxn/ pgxn/
-
-RUN make -j $(getconf _NPROCESSORS_ONLN) \
-        PG_CONFIG=/usr/local/pgsql/bin/pg_config \
-        -C pgxn/neon \
-        -s install && \
-    make -j $(getconf _NPROCESSORS_ONLN) \
-        PG_CONFIG=/usr/local/pgsql/bin/pg_config \
-        -C pgxn/neon_utils \
-        -s install && \
-    make -j $(getconf _NPROCESSORS_ONLN) \
-        PG_CONFIG=/usr/local/pgsql/bin/pg_config \
-        -C pgxn/hnsw \
-        -s install
-
-#########################################################################################
-#
-# Compile and run the Neon-specific `compute_ctl` binary
-#
-#########################################################################################
-FROM $REPOSITORY/$IMAGE:$TAG AS compute-tools
-USER nonroot
-# Copy entire project to get Cargo.* files with proper dependencies for the whole project
-COPY --chown=nonroot . .
-RUN cd compute_tools && cargo build --locked --profile release-line-debug-size-lto
-
-#########################################################################################
-#
-# Clean up postgres folder before inclusion
-#
-#########################################################################################
-FROM neon-pg-ext-build AS postgres-cleanup-layer
-COPY --from=neon-pg-ext-build /usr/local/pgsql /usr/local/pgsql
-
-# Remove binaries from /bin/ that we won't use (or would manually copy & install otherwise)
-RUN cd /usr/local/pgsql/bin && rm ecpg raster2pgsql shp2pgsql pgtopo_export pgtopo_import pgsql2shp
-
-# Remove headers that we won't need anymore - we've completed installation of all extensions
-RUN rm -r /usr/local/pgsql/include
-
-# Remove static postgresql libraries - all compilation is finished, so we
-# can now remove these files - they must be included in other binaries by now
-# if they were to be used by other libraries.
-RUN rm /usr/local/pgsql/lib/lib*.a
-
-#########################################################################################
-#
-# Final layer
-# Put it all together into the final image
-#
-#########################################################################################
-FROM debian:bullseye-slim
-# Add user postgres
-RUN mkdir /var/db && useradd -m -d /var/db/postgres postgres && \
-    echo "postgres:test_console_pass" | chpasswd && \
-    mkdir /var/db/postgres/compute && mkdir /var/db/postgres/specs && \
-    chown -R postgres:postgres /var/db/postgres && \
-    chmod 0750 /var/db/postgres/compute && \
-    echo '/usr/local/lib' >> /etc/ld.so.conf && /sbin/ldconfig && \
-    # create folder for file cache
-    mkdir -p -m 777 /neon/cache
-
-COPY --from=postgres-cleanup-layer --chown=postgres /usr/local/pgsql /usr/local
-COPY --from=compute-tools --chown=postgres /home/nonroot/target/release-line-debug-size-lto/compute_ctl /usr/local/bin/compute_ctl
-
-# Install:
-# libreadline8 for psql
-# libicu67, locales for collations (including ICU and plpgsql_check)
-# liblz4-1 for lz4
-# libossp-uuid16 for extension ossp-uuid
-# libgeos, libgdal, libsfcgal1, libproj and libprotobuf-c1 for PostGIS
-# libxml2, libxslt1.1 for xml2
-# libzstd1 for zstd
-# libboost*, libfreetype6, and zlib1g for rdkit
-RUN apt update &&  \
-    apt install --no-install-recommends -y \
-        gdb \
-        libicu67 \
-        liblz4-1 \
-        libreadline8 \
-        libboost-iostreams1.74.0 \
-        libboost-regex1.74.0 \
-        libboost-serialization1.74.0 \
-        libboost-system1.74.0 \
-        libossp-uuid16 \
-        libfreetype6 \
-        libgeos-c1v5 \
-        libgdal28 \
-        libproj19 \
-        libprotobuf-c1 \
-        libsfcgal1 \
-        libxml2 \
-        libxslt1.1 \
-        libzstd1 \
-        libcurl4-openssl-dev \
-        locales \
-        procps \
-        zlib1g && \
-    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* && \
-    localedef -i en_US -c -f UTF-8 -A /usr/share/locale/locale.alias en_US.UTF-8
-
-ENV LANG en_US.utf8
-USER postgres
-ENTRYPOINT ["/usr/local/bin/compute_ctl"]

Dockerfile.compute-tools

@@ -1,29 +0,0 @@
-# First transient image to build compute_tools binaries
-# NB: keep in sync with rust image version in .github/workflows/build_and_test.yml
-ARG REPOSITORY=neondatabase
-ARG IMAGE=rust
-ARG TAG=pinned
-
-FROM $REPOSITORY/$IMAGE:$TAG AS rust-build
-WORKDIR /home/nonroot
-
-# Enable https://github.com/paritytech/cachepot to cache Rust crates' compilation results in Docker builds.
-# Set up cachepot to use an AWS S3 bucket for cache results, to reuse it between `docker build` invocations.
-# cachepot falls back to local filesystem if S3 is misconfigured, not failing the build.
-ARG RUSTC_WRAPPER=cachepot
-ENV AWS_REGION=eu-central-1
-ENV CACHEPOT_S3_KEY_PREFIX=cachepot
-ARG CACHEPOT_BUCKET=neon-github-dev
-#ARG AWS_ACCESS_KEY_ID
-#ARG AWS_SECRET_ACCESS_KEY
-
-COPY . .
-
-RUN set -e \
-    && mold -run cargo build -p compute_tools --locked --release \
-    && cachepot -s
-
-# Final image that only has one binary
-FROM debian:bullseye-slim
-
-COPY --from=rust-build /home/nonroot/target/release/compute_ctl /usr/local/bin/compute_ctl

Makefile

@@ -1,7 +1,10 @@
-ROOT_PROJECT_DIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST))))
-
-# Where to install Postgres, default is ./pg_install, maybe useful for package managers
-POSTGRES_INSTALL_DIR ?= $(ROOT_PROJECT_DIR)/pg_install/
+# Seccomp BPF is only available for Linux
+UNAME_S := $(shell uname -s)
+ifeq ($(UNAME_S),Linux)
+	SECCOMP = --with-libseccomp
+else
+	SECCOMP =
+endif
 
 #
 # We differentiate between release / debug build types using the BUILD_TYPE
@@ -9,37 +12,17 @@ POSTGRES_INSTALL_DIR ?= $(ROOT_PROJECT_DIR)/pg_install/
 #
 BUILD_TYPE ?= debug
 ifeq ($(BUILD_TYPE),release)
-	PG_CONFIGURE_OPTS = --enable-debug --with-openssl
+	PG_CONFIGURE_OPTS = --enable-debug
 	PG_CFLAGS = -O2 -g3 $(CFLAGS)
 	# Unfortunately, `--profile=...` is a nightly feature
 	CARGO_BUILD_FLAGS += --release
 else ifeq ($(BUILD_TYPE),debug)
-	PG_CONFIGURE_OPTS = --enable-debug --with-openssl --enable-cassert --enable-depend
+	PG_CONFIGURE_OPTS = --enable-debug --enable-cassert --enable-depend
 	PG_CFLAGS = -O0 -g3 $(CFLAGS)
 else
-	$(error Bad build type '$(BUILD_TYPE)', see Makefile for options)
+$(error Bad build type `$(BUILD_TYPE)', see Makefile for options)
 endif
 
-UNAME_S := $(shell uname -s)
-ifeq ($(UNAME_S),Linux)
-	# Seccomp BPF is only available for Linux
-	PG_CONFIGURE_OPTS += --with-libseccomp
-else ifeq ($(UNAME_S),Darwin)
-	# macOS with brew-installed openssl requires explicit paths
-	# It can be configured with OPENSSL_PREFIX variable
-	OPENSSL_PREFIX ?= $(shell brew --prefix openssl@3)
-	PG_CONFIGURE_OPTS += --with-includes=$(OPENSSL_PREFIX)/include --with-libraries=$(OPENSSL_PREFIX)/lib
-	# macOS already has bison and flex in the system, but they are old and result in postgres-v14 target failure
-	# brew formulae are keg-only and not symlinked into HOMEBREW_PREFIX, force their usage
-	EXTRA_PATH_OVERRIDES += $(shell brew --prefix bison)/bin/:$(shell brew --prefix flex)/bin/:
-endif
-
-# Use -C option so that when PostgreSQL "make install" installs the
-# headers, the mtime of the headers are not changed when there have
-# been no changes to the files. Changing the mtime triggers an
-# unnecessary rebuild of 'postgres_ffi'.
-PG_CONFIGURE_OPTS += INSTALL='$(ROOT_PROJECT_DIR)/scripts/ninstall.sh -C'
-
 # Choose whether we should be silent or verbose
 CARGO_BUILD_FLAGS += --$(if $(filter s,$(MAKEFLAGS)),quiet,verbose)
 # Fix for a corner case when make doesn't pass a jobserver
@@ -52,151 +35,64 @@ CARGO_CMD_PREFIX += $(if $(filter n,$(MAKEFLAGS)),,+)
 CARGO_CMD_PREFIX += CARGO_TERM_PROGRESS_WHEN=never CI=1
 
 #
-# Top level Makefile to build Neon and PostgreSQL
+# Top level Makefile to build Zenith and PostgreSQL
 #
 .PHONY: all
-all: neon postgres neon-pg-ext
+all: zenith postgres
 
-### Neon Rust bits
+### Zenith Rust bits
 #
 # The 'postgres_ffi' depends on the Postgres headers.
-.PHONY: neon
-neon: postgres-headers
-	+@echo "Compiling Neon"
+.PHONY: zenith
+zenith: postgres-headers
+	+@echo "Compiling Zenith"
 	$(CARGO_CMD_PREFIX) cargo build $(CARGO_BUILD_FLAGS)
 
 ### PostgreSQL parts
-# Some rules are duplicated for Postgres v14 and 15. We may want to refactor
-# to avoid the duplication in the future, but it's tolerable for now.
-#
-$(POSTGRES_INSTALL_DIR)/build/%/config.status:
-	+@echo "Configuring Postgres $* build"
-	mkdir -p $(POSTGRES_INSTALL_DIR)/build/$*
-	(cd $(POSTGRES_INSTALL_DIR)/build/$* && \
-	env PATH="$(EXTRA_PATH_OVERRIDES):$$PATH" $(ROOT_PROJECT_DIR)/vendor/postgres-$*/configure \
-		CFLAGS='$(PG_CFLAGS)' \
+tmp_install/build/config.status:
+	+@echo "Configuring postgres build"
+	mkdir -p tmp_install/build
+	(cd tmp_install/build && \
+	../../vendor/postgres/configure CFLAGS='$(PG_CFLAGS)' \
 		$(PG_CONFIGURE_OPTS) \
-		--prefix=$(abspath $(POSTGRES_INSTALL_DIR))/$* > configure.log)
+		$(SECCOMP) \
+		--prefix=$(abspath tmp_install) > configure.log)
 
-# nicer alias to run 'configure'
-# Note: I've been unable to use templates for this part of our configuration.
-# I'm not sure why it wouldn't work, but this is the only place (apart from
-# the "build-all-versions" entry points) where direct mention of PostgreSQL
-# versions is used.
-.PHONY: postgres-configure-v15
-postgres-configure-v15: $(POSTGRES_INSTALL_DIR)/build/v15/config.status
-.PHONY: postgres-configure-v14
-postgres-configure-v14: $(POSTGRES_INSTALL_DIR)/build/v14/config.status
-
-# Install the PostgreSQL header files into $(POSTGRES_INSTALL_DIR)/<version>/include
-.PHONY: postgres-headers-%
-postgres-headers-%: postgres-configure-%
-	+@echo "Installing PostgreSQL $* headers"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/include MAKELEVEL=0 install
-
-# Compile and install PostgreSQL
-.PHONY: postgres-%
-postgres-%: postgres-configure-% \
-		  postgres-headers-% # to prevent `make install` conflicts with neon's `postgres-headers`
-	+@echo "Compiling PostgreSQL $*"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$* MAKELEVEL=0 install
-	+@echo "Compiling libpq $*"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/interfaces/libpq install
-	+@echo "Compiling pg_prewarm $*"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pg_prewarm install
-	+@echo "Compiling pg_buffercache $*"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pg_buffercache install
-	+@echo "Compiling pageinspect $*"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pageinspect install
-
-.PHONY: postgres-clean-%
-postgres-clean-%:
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$* MAKELEVEL=0 clean
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pg_buffercache clean
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pageinspect clean
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/interfaces/libpq clean
-
-.PHONY: neon-pg-ext-%
-neon-pg-ext-%: postgres-%
-	+@echo "Compiling neon $*"
-	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-$*
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		-C $(POSTGRES_INSTALL_DIR)/build/neon-$* \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile install
-	+@echo "Compiling neon_walredo $*"
-	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-walredo-$*
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		-C $(POSTGRES_INSTALL_DIR)/build/neon-walredo-$* \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon_walredo/Makefile install
-	+@echo "Compiling neon_test_utils $*"
-	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-test-utils-$*
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		-C $(POSTGRES_INSTALL_DIR)/build/neon-test-utils-$* \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon_test_utils/Makefile install
-	+@echo "Compiling neon_utils $*"
-	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-utils-$*
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		-C $(POSTGRES_INSTALL_DIR)/build/neon-utils-$* \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon_utils/Makefile install
-	+@echo "Compiling hnsw $*"
-	mkdir -p $(POSTGRES_INSTALL_DIR)/build/hnsw-$*
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		-C $(POSTGRES_INSTALL_DIR)/build/hnsw-$* \
-		-f $(ROOT_PROJECT_DIR)/pgxn/hnsw/Makefile install
-
-.PHONY: neon-pg-ext-clean-%
-neon-pg-ext-clean-%:
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
-	-C $(POSTGRES_INSTALL_DIR)/build/neon-$* \
-	-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile clean
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
-	-C $(POSTGRES_INSTALL_DIR)/build/neon-walredo-$* \
-	-f $(ROOT_PROJECT_DIR)/pgxn/neon_walredo/Makefile clean
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
-	-C $(POSTGRES_INSTALL_DIR)/build/neon-test-utils-$* \
-	-f $(ROOT_PROJECT_DIR)/pgxn/neon_test_utils/Makefile clean
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
-	-C $(POSTGRES_INSTALL_DIR)/build/neon-utils-$* \
-	-f $(ROOT_PROJECT_DIR)/pgxn/neon_utils/Makefile clean
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
-	-C $(POSTGRES_INSTALL_DIR)/build/hnsw-$* \
-	-f $(ROOT_PROJECT_DIR)/pgxn/hnsw/Makefile clean
-
-.PHONY: neon-pg-ext
-neon-pg-ext: \
-	neon-pg-ext-v14 \
-	neon-pg-ext-v15
-
-.PHONY: neon-pg-ext-clean
-neon-pg-ext-clean: \
-	neon-pg-ext-clean-v14 \
-	neon-pg-ext-clean-v15
-
-# shorthand to build all Postgres versions
-.PHONY: postgres
-postgres: \
-	postgres-v14 \
-	postgres-v15
+# nicer alias for running 'configure'
+.PHONY: postgres-configure
+postgres-configure: tmp_install/build/config.status
 
+# Install the PostgreSQL header files into tmp_install/include
 .PHONY: postgres-headers
-postgres-headers: \
-	postgres-headers-v14 \
-	postgres-headers-v15
+postgres-headers: postgres-configure
+	+@echo "Installing PostgreSQL headers"
+	$(MAKE) -C tmp_install/build/src/include MAKELEVEL=0 install
+
+# Compile and install PostgreSQL and contrib/zenith
+.PHONY: postgres
+postgres: postgres-configure \
+		  postgres-headers # to prevent `make install` conflicts with zenith's `postgres-headers`
+	+@echo "Compiling PostgreSQL"
+	$(MAKE) -C tmp_install/build MAKELEVEL=0 install
+	+@echo "Compiling contrib/zenith"
+	$(MAKE) -C tmp_install/build/contrib/zenith install
+	+@echo "Compiling contrib/zenith_test_utils"
+	$(MAKE) -C tmp_install/build/contrib/zenith_test_utils install
 
 .PHONY: postgres-clean
-postgres-clean: \
-	postgres-clean-v14 \
-	postgres-clean-v15
+postgres-clean:
+	$(MAKE) -C tmp_install/build MAKELEVEL=0 clean
 
 # This doesn't remove the effects of 'configure'.
 .PHONY: clean
-clean: postgres-clean neon-pg-ext-clean
+clean:
+	cd tmp_install/build && $(MAKE) clean
 	$(CARGO_CMD_PREFIX) cargo clean
 
 # This removes everything
 .PHONY: distclean
 distclean:
-	rm -rf $(POSTGRES_INSTALL_DIR)
+	rm -rf tmp_install
 	$(CARGO_CMD_PREFIX) cargo clean
 
 .PHONY: fmt
@@ -205,4 +101,4 @@ fmt:
 
 .PHONY: setup-pre-commit-hook
 setup-pre-commit-hook:
-	ln -s -f $(ROOT_PROJECT_DIR)/pre-commit.py .git/hooks/pre-commit
+	ln -s -f ../../pre-commit.py .git/hooks/pre-commit

NOTICE

@@ -1,5 +0,0 @@
-Neon
-Copyright 2022 Neon Inc.
-
-The PostgreSQL submodules in vendor/postgres-v14 and vendor/postgres-v15 are licensed under the
-PostgreSQL license. See vendor/postgres-v14/COPYRIGHT and vendor/postgres-v15/COPYRIGHT.

Pipfile

@@ -0,0 +1,30 @@
+[[source]]
+url = "https://pypi.python.org/simple"
+verify_ssl = true
+name = "pypi"
+
+[packages]
+pytest = ">=6.0.0"
+typing-extensions = "*"
+pyjwt = {extras = ["crypto"], version = "*"}
+requests = "*"
+pytest-xdist = "*"
+asyncpg = "*"
+cached-property = "*"
+psycopg2-binary = "*"
+jinja2 = "*"
+
+[dev-packages]
+# Behavior may change slightly between versions. These are run continuously,
+# so we pin exact versions to avoid suprising breaks. Update if comfortable.
+yapf = "==0.31.0"
+mypy = "==0.910"
+# Non-pinned packages follow.
+pipenv = "*"
+flake8 = "*"
+types-requests = "*"
+types-psycopg2 = "*"
+
+[requires]
+# we need at least 3.7, but pipenv doesn't allow to say this directly
+python_version = "3"

Pipfile.lock

@@ -0,0 +1,652 @@
+{
+    "_meta": {
+        "hash": {
+            "sha256": "c309cb963a7b07ae3d30e9cbf08b495f77bdecc0e5356fc89d133c4fbcb65b2b"
+        },
+        "pipfile-spec": 6,
+        "requires": {
+            "python_version": "3"
+        },
+        "sources": [
+            {
+                "name": "pypi",
+                "url": "https://pypi.python.org/simple",
+                "verify_ssl": true
+            }
+        ]
+    },
+    "default": {
+        "asyncpg": {
+            "hashes": [
+                "sha256:129d501f3d30616afd51eb8d3142ef51ba05374256bd5834cec3ef4956a9b317",
+                "sha256:29ef6ae0a617fc13cc2ac5dc8e9b367bb83cba220614b437af9b67766f4b6b20",
+                "sha256:41704c561d354bef01353835a7846e5606faabbeb846214dfcf666cf53319f18",
+                "sha256:556b0e92e2b75dc028b3c4bc9bd5162ddf0053b856437cf1f04c97f9c6837d03",
+                "sha256:8ff5073d4b654e34bd5eaadc01dc4d68b8a9609084d835acd364cd934190a08d",
+                "sha256:a458fc69051fbb67d995fdda46d75a012b5d6200f91e17d23d4751482640ed4c",
+                "sha256:a7095890c96ba36f9f668eb552bb020dddb44f8e73e932f8573efc613ee83843",
+                "sha256:a738f4807c853623d3f93f0fea11f61be6b0e5ca16ea8aeb42c2c7ee742aa853",
+                "sha256:c4fc0205fe4ddd5aeb3dfdc0f7bafd43411181e1f5650189608e5971cceacff1",
+                "sha256:dd2fa063c3344823487d9ddccb40802f02622ddf8bf8a6cc53885ee7a2c1c0c6",
+                "sha256:ddffcb85227bf39cd1bedd4603e0082b243cf3b14ced64dce506a15b05232b83",
+                "sha256:e36c6806883786b19551bb70a4882561f31135dc8105a59662e0376cf5b2cbc5",
+                "sha256:eed43abc6ccf1dc02e0d0efc06ce46a411362f3358847c6b0ec9a43426f91ece"
+            ],
+            "index": "pypi",
+            "version": "==0.24.0"
+        },
+        "attrs": {
+            "hashes": [
+                "sha256:149e90d6d8ac20db7a955ad60cf0e6881a3f20d37096140088356da6c716b0b1",
+                "sha256:ef6aaac3ca6cd92904cdd0d83f629a15f18053ec84e6432106f7a4d04ae4f5fb"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
+            "version": "==21.2.0"
+        },
+        "cached-property": {
+            "hashes": [
+                "sha256:9fa5755838eecbb2d234c3aa390bd80fbd3ac6b6869109bfc1b499f7bd89a130",
+                "sha256:df4f613cf7ad9a588cc381aaf4a512d26265ecebd5eb9e1ba12f1319eb85a6a0"
+            ],
+            "index": "pypi",
+            "version": "==1.5.2"
+        },
+        "certifi": {
+            "hashes": [
+                "sha256:78884e7c1d4b00ce3cea67b44566851c4343c120abd683433ce934a68ea58872",
+                "sha256:d62a0163eb4c2344ac042ab2bdf75399a71a2d8c7d47eac2e2ee91b9d6339569"
+            ],
+            "version": "==2021.10.8"
+        },
+        "cffi": {
+            "hashes": [
+                "sha256:00c878c90cb53ccfaae6b8bc18ad05d2036553e6d9d1d9dbcf323bbe83854ca3",
+                "sha256:0104fb5ae2391d46a4cb082abdd5c69ea4eab79d8d44eaaf79f1b1fd806ee4c2",
+                "sha256:06c48159c1abed75c2e721b1715c379fa3200c7784271b3c46df01383b593636",
+                "sha256:0808014eb713677ec1292301ea4c81ad277b6cdf2fdd90fd540af98c0b101d20",
+                "sha256:10dffb601ccfb65262a27233ac273d552ddc4d8ae1bf93b21c94b8511bffe728",
+                "sha256:14cd121ea63ecdae71efa69c15c5543a4b5fbcd0bbe2aad864baca0063cecf27",
+                "sha256:17771976e82e9f94976180f76468546834d22a7cc404b17c22df2a2c81db0c66",
+                "sha256:181dee03b1170ff1969489acf1c26533710231c58f95534e3edac87fff06c443",
+                "sha256:23cfe892bd5dd8941608f93348c0737e369e51c100d03718f108bf1add7bd6d0",
+                "sha256:263cc3d821c4ab2213cbe8cd8b355a7f72a8324577dc865ef98487c1aeee2bc7",
+                "sha256:2756c88cbb94231c7a147402476be2c4df2f6078099a6f4a480d239a8817ae39",
+                "sha256:27c219baf94952ae9d50ec19651a687b826792055353d07648a5695413e0c605",
+                "sha256:2a23af14f408d53d5e6cd4e3d9a24ff9e05906ad574822a10563efcef137979a",
+                "sha256:31fb708d9d7c3f49a60f04cf5b119aeefe5644daba1cd2a0fe389b674fd1de37",
+                "sha256:3415c89f9204ee60cd09b235810be700e993e343a408693e80ce7f6a40108029",
+                "sha256:3773c4d81e6e818df2efbc7dd77325ca0dcb688116050fb2b3011218eda36139",
+                "sha256:3b96a311ac60a3f6be21d2572e46ce67f09abcf4d09344c49274eb9e0bf345fc",
+                "sha256:3f7d084648d77af029acb79a0ff49a0ad7e9d09057a9bf46596dac9514dc07df",
+                "sha256:41d45de54cd277a7878919867c0f08b0cf817605e4eb94093e7516505d3c8d14",
+                "sha256:4238e6dab5d6a8ba812de994bbb0a79bddbdf80994e4ce802b6f6f3142fcc880",
+                "sha256:45db3a33139e9c8f7c09234b5784a5e33d31fd6907800b316decad50af323ff2",
+                "sha256:45e8636704eacc432a206ac7345a5d3d2c62d95a507ec70d62f23cd91770482a",
+                "sha256:4958391dbd6249d7ad855b9ca88fae690783a6be9e86df65865058ed81fc860e",
+                "sha256:4a306fa632e8f0928956a41fa8e1d6243c71e7eb59ffbd165fc0b41e316b2474",
+                "sha256:57e9ac9ccc3101fac9d6014fba037473e4358ef4e89f8e181f8951a2c0162024",
+                "sha256:59888172256cac5629e60e72e86598027aca6bf01fa2465bdb676d37636573e8",
+                "sha256:5e069f72d497312b24fcc02073d70cb989045d1c91cbd53979366077959933e0",
+                "sha256:64d4ec9f448dfe041705426000cc13e34e6e5bb13736e9fd62e34a0b0c41566e",
+                "sha256:6dc2737a3674b3e344847c8686cf29e500584ccad76204efea14f451d4cc669a",
+                "sha256:74fdfdbfdc48d3f47148976f49fab3251e550a8720bebc99bf1483f5bfb5db3e",
+                "sha256:75e4024375654472cc27e91cbe9eaa08567f7fbdf822638be2814ce059f58032",
+                "sha256:786902fb9ba7433aae840e0ed609f45c7bcd4e225ebb9c753aa39725bb3e6ad6",
+                "sha256:8b6c2ea03845c9f501ed1313e78de148cd3f6cad741a75d43a29b43da27f2e1e",
+                "sha256:91d77d2a782be4274da750752bb1650a97bfd8f291022b379bb8e01c66b4e96b",
+                "sha256:91ec59c33514b7c7559a6acda53bbfe1b283949c34fe7440bcf917f96ac0723e",
+                "sha256:920f0d66a896c2d99f0adbb391f990a84091179542c205fa53ce5787aff87954",
+                "sha256:a5263e363c27b653a90078143adb3d076c1a748ec9ecc78ea2fb916f9b861962",
+                "sha256:abb9a20a72ac4e0fdb50dae135ba5e77880518e742077ced47eb1499e29a443c",
+                "sha256:c2051981a968d7de9dd2d7b87bcb9c939c74a34626a6e2f8181455dd49ed69e4",
+                "sha256:c21c9e3896c23007803a875460fb786118f0cdd4434359577ea25eb556e34c55",
+                "sha256:c2502a1a03b6312837279c8c1bd3ebedf6c12c4228ddbad40912d671ccc8a962",
+                "sha256:d4d692a89c5cf08a8557fdeb329b82e7bf609aadfaed6c0d79f5a449a3c7c023",
+                "sha256:da5db4e883f1ce37f55c667e5c0de439df76ac4cb55964655906306918e7363c",
+                "sha256:e7022a66d9b55e93e1a845d8c9eba2a1bebd4966cd8bfc25d9cd07d515b33fa6",
+                "sha256:ef1f279350da2c586a69d32fc8733092fd32cc8ac95139a00377841f59a3f8d8",
+                "sha256:f54a64f8b0c8ff0b64d18aa76675262e1700f3995182267998c31ae974fbc382",
+                "sha256:f5c7150ad32ba43a07c4479f40241756145a1f03b43480e058cfd862bf5041c7",
+                "sha256:f6f824dc3bce0edab5f427efcfb1d63ee75b6fcb7282900ccaf925be84efb0fc",
+                "sha256:fd8a250edc26254fe5b33be00402e6d287f562b6a5b2152dec302fa15bb3e997",
+                "sha256:ffaa5c925128e29efbde7301d8ecaf35c8c60ffbcd6a1ffd3a552177c8e5e796"
+            ],
+            "version": "==1.15.0"
+        },
+        "charset-normalizer": {
+            "hashes": [
+                "sha256:e019de665e2bcf9c2b64e2e5aa025fa991da8720daa3c1138cadd2fd1856aed0",
+                "sha256:f7af805c321bfa1ce6714c51f254e0d5bb5e5834039bc17db7ebe3a4cec9492b"
+            ],
+            "markers": "python_version >= '3'",
+            "version": "==2.0.7"
+        },
+        "cryptography": {
+            "hashes": [
+                "sha256:07bb7fbfb5de0980590ddfc7f13081520def06dc9ed214000ad4372fb4e3c7f6",
+                "sha256:18d90f4711bf63e2fb21e8c8e51ed8189438e6b35a6d996201ebd98a26abbbe6",
+                "sha256:1ed82abf16df40a60942a8c211251ae72858b25b7421ce2497c2eb7a1cee817c",
+                "sha256:22a38e96118a4ce3b97509443feace1d1011d0571fae81fc3ad35f25ba3ea999",
+                "sha256:2d69645f535f4b2c722cfb07a8eab916265545b3475fdb34e0be2f4ee8b0b15e",
+                "sha256:4a2d0e0acc20ede0f06ef7aa58546eee96d2592c00f450c9acb89c5879b61992",
+                "sha256:54b2605e5475944e2213258e0ab8696f4f357a31371e538ef21e8d61c843c28d",
+                "sha256:7075b304cd567694dc692ffc9747f3e9cb393cc4aa4fb7b9f3abd6f5c4e43588",
+                "sha256:7b7ceeff114c31f285528ba8b390d3e9cfa2da17b56f11d366769a807f17cbaa",
+                "sha256:7eba2cebca600a7806b893cb1d541a6e910afa87e97acf2021a22b32da1df52d",
+                "sha256:928185a6d1ccdb816e883f56ebe92e975a262d31cc536429041921f8cb5a62fd",
+                "sha256:9933f28f70d0517686bd7de36166dda42094eac49415459d9bdf5e7df3e0086d",
+                "sha256:a688ebcd08250eab5bb5bca318cc05a8c66de5e4171a65ca51db6bd753ff8953",
+                "sha256:abb5a361d2585bb95012a19ed9b2c8f412c5d723a9836418fab7aaa0243e67d2",
+                "sha256:c10c797ac89c746e488d2ee92bd4abd593615694ee17b2500578b63cad6b93a8",
+                "sha256:ced40344e811d6abba00295ced98c01aecf0c2de39481792d87af4fa58b7b4d6",
+                "sha256:d57e0cdc1b44b6cdf8af1d01807db06886f10177469312fbde8f44ccbb284bc9",
+                "sha256:d99915d6ab265c22873f1b4d6ea5ef462ef797b4140be4c9d8b179915e0985c6",
+                "sha256:eb80e8a1f91e4b7ef8b33041591e6d89b2b8e122d787e87eeb2b08da71bb16ad",
+                "sha256:ebeddd119f526bcf323a89f853afb12e225902a24d29b55fe18dd6fcb2838a76"
+            ],
+            "version": "==35.0.0"
+        },
+        "execnet": {
+            "hashes": [
+                "sha256:8f694f3ba9cc92cab508b152dcfe322153975c29bda272e2fd7f3f00f36e47c5",
+                "sha256:a295f7cc774947aac58dde7fdc85f4aa00c42adf5d8f5468fc630c1acf30a142"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
+            "version": "==1.9.0"
+        },
+        "idna": {
+            "hashes": [
+                "sha256:84d9dd047ffa80596e0f246e2eab0b391788b0503584e8945f2368256d2735ff",
+                "sha256:9d643ff0a55b762d5cdb124b8eaa99c66322e2157b69160bc32796e824360e6d"
+            ],
+            "markers": "python_version >= '3'",
+            "version": "==3.3"
+        },
+        "importlib-metadata": {
+            "hashes": [
+                "sha256:b618b6d2d5ffa2f16add5697cf57a46c76a56229b0ed1c438322e4e95645bd15",
+                "sha256:f284b3e11256ad1e5d03ab86bb2ccd6f5339688ff17a4d797a0fe7df326f23b1"
+            ],
+            "markers": "python_version < '3.8'",
+            "version": "==4.8.1"
+        },
+        "iniconfig": {
+            "hashes": [
+                "sha256:011e24c64b7f47f6ebd835bb12a743f2fbe9a26d4cecaa7f53bc4f35ee9da8b3",
+                "sha256:bc3af051d7d14b2ee5ef9969666def0cd1a000e121eaea580d4a313df4b37f32"
+            ],
+            "version": "==1.1.1"
+        },
+        "jinja2": {
+            "hashes": [
+                "sha256:827a0e32839ab1600d4eb1c4c33ec5a8edfbc5cb42dafa13b81f182f97784b45",
+                "sha256:8569982d3f0889eed11dd620c706d39b60c36d6d25843961f33f77fb6bc6b20c"
+            ],
+            "index": "pypi",
+            "version": "==3.0.2"
+        },
+        "markupsafe": {
+            "hashes": [
+                "sha256:01a9b8ea66f1658938f65b93a85ebe8bc016e6769611be228d797c9d998dd298",
+                "sha256:023cb26ec21ece8dc3907c0e8320058b2e0cb3c55cf9564da612bc325bed5e64",
+                "sha256:0446679737af14f45767963a1a9ef7620189912317d095f2d9ffa183a4d25d2b",
+                "sha256:04635854b943835a6ea959e948d19dcd311762c5c0c6e1f0e16ee57022669194",
+                "sha256:0717a7390a68be14b8c793ba258e075c6f4ca819f15edfc2a3a027c823718567",
+                "sha256:0955295dd5eec6cb6cc2fe1698f4c6d84af2e92de33fbcac4111913cd100a6ff",
+                "sha256:0d4b31cc67ab36e3392bbf3862cfbadac3db12bdd8b02a2731f509ed5b829724",
+                "sha256:10f82115e21dc0dfec9ab5c0223652f7197feb168c940f3ef61563fc2d6beb74",
+                "sha256:168cd0a3642de83558a5153c8bd34f175a9a6e7f6dc6384b9655d2697312a646",
+                "sha256:1d609f577dc6e1aa17d746f8bd3c31aa4d258f4070d61b2aa5c4166c1539de35",
+                "sha256:1f2ade76b9903f39aa442b4aadd2177decb66525062db244b35d71d0ee8599b6",
+                "sha256:20dca64a3ef2d6e4d5d615a3fd418ad3bde77a47ec8a23d984a12b5b4c74491a",
+                "sha256:2a7d351cbd8cfeb19ca00de495e224dea7e7d919659c2841bbb7f420ad03e2d6",
+                "sha256:2d7d807855b419fc2ed3e631034685db6079889a1f01d5d9dac950f764da3dad",
+                "sha256:2ef54abee730b502252bcdf31b10dacb0a416229b72c18b19e24a4509f273d26",
+                "sha256:36bc903cbb393720fad60fc28c10de6acf10dc6cc883f3e24ee4012371399a38",
+                "sha256:37205cac2a79194e3750b0af2a5720d95f786a55ce7df90c3af697bfa100eaac",
+                "sha256:3c112550557578c26af18a1ccc9e090bfe03832ae994343cfdacd287db6a6ae7",
+                "sha256:3dd007d54ee88b46be476e293f48c85048603f5f516008bee124ddd891398ed6",
+                "sha256:4296f2b1ce8c86a6aea78613c34bb1a672ea0e3de9c6ba08a960efe0b0a09047",
+                "sha256:47ab1e7b91c098ab893b828deafa1203de86d0bc6ab587b160f78fe6c4011f75",
+                "sha256:49e3ceeabbfb9d66c3aef5af3a60cc43b85c33df25ce03d0031a608b0a8b2e3f",
+                "sha256:4dc8f9fb58f7364b63fd9f85013b780ef83c11857ae79f2feda41e270468dd9b",
+                "sha256:4efca8f86c54b22348a5467704e3fec767b2db12fc39c6d963168ab1d3fc9135",
+                "sha256:53edb4da6925ad13c07b6d26c2a852bd81e364f95301c66e930ab2aef5b5ddd8",
+                "sha256:5855f8438a7d1d458206a2466bf82b0f104a3724bf96a1c781ab731e4201731a",
+                "sha256:594c67807fb16238b30c44bdf74f36c02cdf22d1c8cda91ef8a0ed8dabf5620a",
+                "sha256:5b6d930f030f8ed98e3e6c98ffa0652bdb82601e7a016ec2ab5d7ff23baa78d1",
+                "sha256:5bb28c636d87e840583ee3adeb78172efc47c8b26127267f54a9c0ec251d41a9",
+                "sha256:60bf42e36abfaf9aff1f50f52644b336d4f0a3fd6d8a60ca0d054ac9f713a864",
+                "sha256:611d1ad9a4288cf3e3c16014564df047fe08410e628f89805e475368bd304914",
+                "sha256:6300b8454aa6930a24b9618fbb54b5a68135092bc666f7b06901f897fa5c2fee",
+                "sha256:63f3268ba69ace99cab4e3e3b5840b03340efed0948ab8f78d2fd87ee5442a4f",
+                "sha256:6557b31b5e2c9ddf0de32a691f2312a32f77cd7681d8af66c2692efdbef84c18",
+                "sha256:693ce3f9e70a6cf7d2fb9e6c9d8b204b6b39897a2c4a1aa65728d5ac97dcc1d8",
+                "sha256:6a7fae0dd14cf60ad5ff42baa2e95727c3d81ded453457771d02b7d2b3f9c0c2",
+                "sha256:6c4ca60fa24e85fe25b912b01e62cb969d69a23a5d5867682dd3e80b5b02581d",
+                "sha256:6fcf051089389abe060c9cd7caa212c707e58153afa2c649f00346ce6d260f1b",
+                "sha256:7d91275b0245b1da4d4cfa07e0faedd5b0812efc15b702576d103293e252af1b",
+                "sha256:89c687013cb1cd489a0f0ac24febe8c7a666e6e221b783e53ac50ebf68e45d86",
+                "sha256:8d206346619592c6200148b01a2142798c989edcb9c896f9ac9722a99d4e77e6",
+                "sha256:905fec760bd2fa1388bb5b489ee8ee5f7291d692638ea5f67982d968366bef9f",
+                "sha256:97383d78eb34da7e1fa37dd273c20ad4320929af65d156e35a5e2d89566d9dfb",
+                "sha256:984d76483eb32f1bcb536dc27e4ad56bba4baa70be32fa87152832cdd9db0833",
+                "sha256:99df47edb6bda1249d3e80fdabb1dab8c08ef3975f69aed437cb69d0a5de1e28",
+                "sha256:9f02365d4e99430a12647f09b6cc8bab61a6564363f313126f775eb4f6ef798e",
+                "sha256:a30e67a65b53ea0a5e62fe23682cfe22712e01f453b95233b25502f7c61cb415",
+                "sha256:ab3ef638ace319fa26553db0624c4699e31a28bb2a835c5faca8f8acf6a5a902",
+                "sha256:aca6377c0cb8a8253e493c6b451565ac77e98c2951c45f913e0b52facdcff83f",
+                "sha256:add36cb2dbb8b736611303cd3bfcee00afd96471b09cda130da3581cbdc56a6d",
+                "sha256:b2f4bf27480f5e5e8ce285a8c8fd176c0b03e93dcc6646477d4630e83440c6a9",
+                "sha256:b7f2d075102dc8c794cbde1947378051c4e5180d52d276987b8d28a3bd58c17d",
+                "sha256:baa1a4e8f868845af802979fcdbf0bb11f94f1cb7ced4c4b8a351bb60d108145",
+                "sha256:be98f628055368795d818ebf93da628541e10b75b41c559fdf36d104c5787066",
+                "sha256:bf5d821ffabf0ef3533c39c518f3357b171a1651c1ff6827325e4489b0e46c3c",
+                "sha256:c47adbc92fc1bb2b3274c4b3a43ae0e4573d9fbff4f54cd484555edbf030baf1",
+                "sha256:cdfba22ea2f0029c9261a4bd07e830a8da012291fbe44dc794e488b6c9bb353a",
+                "sha256:d6c7ebd4e944c85e2c3421e612a7057a2f48d478d79e61800d81468a8d842207",
+                "sha256:d7f9850398e85aba693bb640262d3611788b1f29a79f0c93c565694658f4071f",
+                "sha256:d8446c54dc28c01e5a2dbac5a25f071f6653e6e40f3a8818e8b45d790fe6ef53",
+                "sha256:deb993cacb280823246a026e3b2d81c493c53de6acfd5e6bfe31ab3402bb37dd",
+                "sha256:e0f138900af21926a02425cf736db95be9f4af72ba1bb21453432a07f6082134",
+                "sha256:e9936f0b261d4df76ad22f8fee3ae83b60d7c3e871292cd42f40b81b70afae85",
+                "sha256:f0567c4dc99f264f49fe27da5f735f414c4e7e7dd850cfd8e69f0862d7c74ea9",
+                "sha256:f5653a225f31e113b152e56f154ccbe59eeb1c7487b39b9d9f9cdb58e6c79dc5",
+                "sha256:f826e31d18b516f653fe296d967d700fddad5901ae07c622bb3705955e1faa94",
+                "sha256:f8ba0e8349a38d3001fae7eadded3f6606f0da5d748ee53cc1dab1d6527b9509",
+                "sha256:f9081981fe268bd86831e5c75f7de206ef275defcb82bc70740ae6dc507aee51",
+                "sha256:fa130dd50c57d53368c9d59395cb5526eda596d3ffe36666cd81a44d56e48872"
+            ],
+            "markers": "python_version >= '3.6'",
+            "version": "==2.0.1"
+        },
+        "packaging": {
+            "hashes": [
+                "sha256:096d689d78ca690e4cd8a89568ba06d07ca097e3306a4381635073ca91479966",
+                "sha256:14317396d1e8cdb122989b916fa2c7e9ca8e2be9e8060a6eff75b6b7b4d8a7e0"
+            ],
+            "markers": "python_version >= '3.6'",
+            "version": "==21.2"
+        },
+        "pluggy": {
+            "hashes": [
+                "sha256:4224373bacce55f955a878bf9cfa763c1e360858e330072059e10bad68531159",
+                "sha256:74134bbf457f031a36d68416e1509f34bd5ccc019f0bcc952c7b909d06b37bd3"
+            ],
+            "markers": "python_version >= '3.6'",
+            "version": "==1.0.0"
+        },
+        "psycopg2-binary": {
+            "hashes": [
+                "sha256:0b7dae87f0b729922e06f85f667de7bf16455d411971b2043bbd9577af9d1975",
+                "sha256:0f2e04bd2a2ab54fa44ee67fe2d002bb90cee1c0f1cc0ebc3148af7b02034cbd",
+                "sha256:123c3fb684e9abfc47218d3784c7b4c47c8587951ea4dd5bc38b6636ac57f616",
+                "sha256:1473c0215b0613dd938db54a653f68251a45a78b05f6fc21af4326f40e8360a2",
+                "sha256:14db1752acdd2187d99cb2ca0a1a6dfe57fc65c3281e0f20e597aac8d2a5bd90",
+                "sha256:1e3a362790edc0a365385b1ac4cc0acc429a0c0d662d829a50b6ce743ae61b5a",
+                "sha256:1e85b74cbbb3056e3656f1cc4781294df03383127a8114cbc6531e8b8367bf1e",
+                "sha256:20f1ab44d8c352074e2d7ca67dc00843067788791be373e67a0911998787ce7d",
+                "sha256:24b0b6688b9f31a911f2361fe818492650795c9e5d3a1bc647acbd7440142a4f",
+                "sha256:2f62c207d1740b0bde5c4e949f857b044818f734a3d57f1d0d0edc65050532ed",
+                "sha256:3242b9619de955ab44581a03a64bdd7d5e470cc4183e8fcadd85ab9d3756ce7a",
+                "sha256:35c4310f8febe41f442d3c65066ca93cccefd75013df3d8c736c5b93ec288140",
+                "sha256:4235f9d5ddcab0b8dbd723dca56ea2922b485ea00e1dafacf33b0c7e840b3d32",
+                "sha256:542875f62bc56e91c6eac05a0deadeae20e1730be4c6334d8f04c944fcd99759",
+                "sha256:5ced67f1e34e1a450cdb48eb53ca73b60aa0af21c46b9b35ac3e581cf9f00e31",
+                "sha256:661509f51531ec125e52357a489ea3806640d0ca37d9dada461ffc69ee1e7b6e",
+                "sha256:7360647ea04db2e7dff1648d1da825c8cf68dc5fbd80b8fb5b3ee9f068dcd21a",
+                "sha256:736b8797b58febabb85494142c627bd182b50d2a7ec65322983e71065ad3034c",
+                "sha256:8c13d72ed6af7fd2c8acbd95661cf9477f94e381fce0792c04981a8283b52917",
+                "sha256:988b47ac70d204aed01589ed342303da7c4d84b56c2f4c4b8b00deda123372bf",
+                "sha256:995fc41ebda5a7a663a254a1dcac52638c3e847f48307b5416ee373da15075d7",
+                "sha256:a36c7eb6152ba5467fb264d73844877be8b0847874d4822b7cf2d3c0cb8cdcb0",
+                "sha256:aed4a9a7e3221b3e252c39d0bf794c438dc5453bc2963e8befe9d4cd324dff72",
+                "sha256:aef9aee84ec78af51107181d02fe8773b100b01c5dfde351184ad9223eab3698",
+                "sha256:b0221ca5a9837e040ebf61f48899926b5783668b7807419e4adae8175a31f773",
+                "sha256:b4d7679a08fea64573c969f6994a2631908bb2c0e69a7235648642f3d2e39a68",
+                "sha256:c250a7ec489b652c892e4f0a5d122cc14c3780f9f643e1a326754aedf82d9a76",
+                "sha256:ca86db5b561b894f9e5f115d6a159fff2a2570a652e07889d8a383b5fae66eb4",
+                "sha256:cfc523edecddaef56f6740d7de1ce24a2fdf94fd5e704091856a201872e37f9f",
+                "sha256:d92272c7c16e105788efe2cfa5d680f07e34e0c29b03c1908f8636f55d5f915a",
+                "sha256:da113b70f6ec40e7d81b43d1b139b9db6a05727ab8be1ee559f3a69854a69d34",
+                "sha256:f6fac64a38f6768e7bc7b035b9e10d8a538a9fadce06b983fb3e6fa55ac5f5ce",
+                "sha256:f8559617b1fcf59a9aedba2c9838b5b6aa211ffedecabca412b92a1ff75aac1a",
+                "sha256:fbb42a541b1093385a2d8c7eec94d26d30437d0e77c1d25dae1dcc46741a385e"
+            ],
+            "index": "pypi",
+            "version": "==2.9.1"
+        },
+        "py": {
+            "hashes": [
+                "sha256:21b81bda15b66ef5e1a777a21c4dcd9c20ad3efd0b3f817e7a809035269e1bd3",
+                "sha256:3b80836aa6d1feeaa108e046da6423ab8f6ceda6468545ae8d02d9d58d18818a"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==1.10.0"
+        },
+        "pycparser": {
+            "hashes": [
+                "sha256:2d475327684562c3a96cc71adf7dc8c4f0565175cf86b6d7a404ff4c771f15f0",
+                "sha256:7582ad22678f0fcd81102833f60ef8d0e57288b6b5fb00323d101be910e35705"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==2.20"
+        },
+        "pyjwt": {
+            "extras": [
+                "crypto"
+            ],
+            "hashes": [
+                "sha256:b888b4d56f06f6dcd777210c334e69c737be74755d3e5e9ee3fe67dc18a0ee41",
+                "sha256:e0c4bb8d9f0af0c7f5b1ec4c5036309617d03d56932877f2f7a0beeb5318322f"
+            ],
+            "index": "pypi",
+            "version": "==2.3.0"
+        },
+        "pyparsing": {
+            "hashes": [
+                "sha256:c203ec8783bf771a155b207279b9bccb8dea02d8f0c9e5f8ead507bc3246ecc1",
+                "sha256:ef9d7589ef3c200abe66653d3f1ab1033c3c419ae9b9bdb1240a85b024efc88b"
+            ],
+            "markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==2.4.7"
+        },
+        "pytest": {
+            "hashes": [
+                "sha256:131b36680866a76e6781d13f101efb86cf674ebb9762eb70d3082b6f29889e89",
+                "sha256:7310f8d27bc79ced999e760ca304d69f6ba6c6649c0b60fb0e04a4a77cacc134"
+            ],
+            "index": "pypi",
+            "version": "==6.2.5"
+        },
+        "pytest-forked": {
+            "hashes": [
+                "sha256:6aa9ac7e00ad1a539c41bec6d21011332de671e938c7637378ec9710204e37ca",
+                "sha256:dc4147784048e70ef5d437951728825a131b81714b398d5d52f17c7c144d8815"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
+            "version": "==1.3.0"
+        },
+        "pytest-xdist": {
+            "hashes": [
+                "sha256:7b61ebb46997a0820a263553179d6d1e25a8c50d8a8620cd1aa1e20e3be99168",
+                "sha256:89b330316f7fc475f999c81b577c2b926c9569f3d397ae432c0c2e2496d61ff9"
+            ],
+            "index": "pypi",
+            "version": "==2.4.0"
+        },
+        "requests": {
+            "hashes": [
+                "sha256:6c1246513ecd5ecd4528a0906f910e8f0f9c6b8ec72030dc9fd154dc1a6efd24",
+                "sha256:b8aa58f8cf793ffd8782d3d8cb19e66ef36f7aba4353eec859e74678b01b07a7"
+            ],
+            "index": "pypi",
+            "version": "==2.26.0"
+        },
+        "toml": {
+            "hashes": [
+                "sha256:806143ae5bfb6a3c6e736a764057db0e6a0e05e338b5630894a5f779cabb4f9b",
+                "sha256:b3bda1d108d5dd99f4a20d24d9c348e91c4db7ab1b749200bded2f839ccbe68f"
+            ],
+            "markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==0.10.2"
+        },
+        "typing-extensions": {
+            "hashes": [
+                "sha256:49f75d16ff11f1cd258e1b988ccff82a3ca5570217d7ad8c5f48205dd99a677e",
+                "sha256:d8226d10bc02a29bcc81df19a26e56a9647f8b0a6d4a83924139f4a8b01f17b7",
+                "sha256:f1d25edafde516b146ecd0613dabcc61409817af4766fbbcfb8d1ad4ec441a34"
+            ],
+            "index": "pypi",
+            "version": "==3.10.0.2"
+        },
+        "urllib3": {
+            "hashes": [
+                "sha256:4987c65554f7a2dbf30c18fd48778ef124af6fab771a377103da0585e2336ece",
+                "sha256:c4fdf4019605b6e5423637e01bc9fe4daef873709a7973e195ceba0a62bbc844"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4' and python_version < '4'",
+            "version": "==1.26.7"
+        },
+        "zipp": {
+            "hashes": [
+                "sha256:71c644c5369f4a6e07636f0aa966270449561fcea2e3d6747b8d23efaa9d7832",
+                "sha256:9fe5ea21568a0a70e50f273397638d39b03353731e6cbbb3fd8502a33fec40bc"
+            ],
+            "markers": "python_version >= '3.6'",
+            "version": "==3.6.0"
+        }
+    },
+    "develop": {
+        "backports.entry-points-selectable": {
+            "hashes": [
+                "sha256:988468260ec1c196dab6ae1149260e2f5472c9110334e5d51adcb77867361f6a",
+                "sha256:a6d9a871cde5e15b4c4a53e3d43ba890cc6861ec1332c9c2428c92f977192acc"
+            ],
+            "markers": "python_version >= '2.7'",
+            "version": "==1.1.0"
+        },
+        "certifi": {
+            "hashes": [
+                "sha256:78884e7c1d4b00ce3cea67b44566851c4343c120abd683433ce934a68ea58872",
+                "sha256:d62a0163eb4c2344ac042ab2bdf75399a71a2d8c7d47eac2e2ee91b9d6339569"
+            ],
+            "version": "==2021.10.8"
+        },
+        "distlib": {
+            "hashes": [
+                "sha256:c8b54e8454e5bf6237cc84c20e8264c3e991e824ef27e8f1e81049867d861e31",
+                "sha256:d982d0751ff6eaaab5e2ec8e691d949ee80eddf01a62eaa96ddb11531fe16b05"
+            ],
+            "version": "==0.3.3"
+        },
+        "filelock": {
+            "hashes": [
+                "sha256:7afc856f74fa7006a289fd10fa840e1eebd8bbff6bffb69c26c54a0512ea8cf8",
+                "sha256:bb2a1c717df74c48a2d00ed625e5a66f8572a3a30baacb7657add1d7bac4097b"
+            ],
+            "markers": "python_version >= '3.6'",
+            "version": "==3.3.2"
+        },
+        "flake8": {
+            "hashes": [
+                "sha256:479b1304f72536a55948cb40a32dce8bb0ffe3501e26eaf292c7e60eb5e0428d",
+                "sha256:806e034dda44114815e23c16ef92f95c91e4c71100ff52813adf7132a6ad870d"
+            ],
+            "index": "pypi",
+            "version": "==4.0.1"
+        },
+        "importlib-metadata": {
+            "hashes": [
+                "sha256:b618b6d2d5ffa2f16add5697cf57a46c76a56229b0ed1c438322e4e95645bd15",
+                "sha256:f284b3e11256ad1e5d03ab86bb2ccd6f5339688ff17a4d797a0fe7df326f23b1"
+            ],
+            "markers": "python_version < '3.8'",
+            "version": "==4.8.1"
+        },
+        "mccabe": {
+            "hashes": [
+                "sha256:ab8a6258860da4b6677da4bd2fe5dc2c659cff31b3ee4f7f5d64e79735b80d42",
+                "sha256:dd8d182285a0fe56bace7f45b5e7d1a6ebcbf524e8f3bd87eb0f125271b8831f"
+            ],
+            "version": "==0.6.1"
+        },
+        "mypy": {
+            "hashes": [
+                "sha256:088cd9c7904b4ad80bec811053272986611b84221835e079be5bcad029e79dd9",
+                "sha256:0aadfb2d3935988ec3815952e44058a3100499f5be5b28c34ac9d79f002a4a9a",
+                "sha256:119bed3832d961f3a880787bf621634ba042cb8dc850a7429f643508eeac97b9",
+                "sha256:1a85e280d4d217150ce8cb1a6dddffd14e753a4e0c3cf90baabb32cefa41b59e",
+                "sha256:3c4b8ca36877fc75339253721f69603a9c7fdb5d4d5a95a1a1b899d8b86a4de2",
+                "sha256:3e382b29f8e0ccf19a2df2b29a167591245df90c0b5a2542249873b5c1d78212",
+                "sha256:42c266ced41b65ed40a282c575705325fa7991af370036d3f134518336636f5b",
+                "sha256:53fd2eb27a8ee2892614370896956af2ff61254c275aaee4c230ae771cadd885",
+                "sha256:704098302473cb31a218f1775a873b376b30b4c18229421e9e9dc8916fd16150",
+                "sha256:7df1ead20c81371ccd6091fa3e2878559b5c4d4caadaf1a484cf88d93ca06703",
+                "sha256:866c41f28cee548475f146aa4d39a51cf3b6a84246969f3759cb3e9c742fc072",
+                "sha256:a155d80ea6cee511a3694b108c4494a39f42de11ee4e61e72bc424c490e46457",
+                "sha256:adaeee09bfde366d2c13fe6093a7df5df83c9a2ba98638c7d76b010694db760e",
+                "sha256:b6fb13123aeef4a3abbcfd7e71773ff3ff1526a7d3dc538f3929a49b42be03f0",
+                "sha256:b94e4b785e304a04ea0828759172a15add27088520dc7e49ceade7834275bedb",
+                "sha256:c0df2d30ed496a08de5daed2a9ea807d07c21ae0ab23acf541ab88c24b26ab97",
+                "sha256:c6c2602dffb74867498f86e6129fd52a2770c48b7cd3ece77ada4fa38f94eba8",
+                "sha256:ceb6e0a6e27fb364fb3853389607cf7eb3a126ad335790fa1e14ed02fba50811",
+                "sha256:d9dd839eb0dc1bbe866a288ba3c1afc33a202015d2ad83b31e875b5905a079b6",
+                "sha256:e4dab234478e3bd3ce83bac4193b2ecd9cf94e720ddd95ce69840273bf44f6de",
+                "sha256:ec4e0cd079db280b6bdabdc807047ff3e199f334050db5cbb91ba3e959a67504",
+                "sha256:ecd2c3fe726758037234c93df7e98deb257fd15c24c9180dacf1ef829da5f921",
+                "sha256:ef565033fa5a958e62796867b1df10c40263ea9ded87164d67572834e57a174d"
+            ],
+            "index": "pypi",
+            "version": "==0.910"
+        },
+        "mypy-extensions": {
+            "hashes": [
+                "sha256:090fedd75945a69ae91ce1303b5824f428daf5a028d2f6ab8a299250a846f15d",
+                "sha256:2d82818f5bb3e369420cb3c4060a7970edba416647068eb4c5343488a6c604a8"
+            ],
+            "version": "==0.4.3"
+        },
+        "pipenv": {
+            "hashes": [
+                "sha256:05958fadcd70b2de6a27542fcd2bd72dd5c59c6d35307fdac3e06361fb06e30e",
+                "sha256:d180f5be4775c552fd5e69ae18a9d6099d9dafb462efe54f11c72cb5f4d5e977"
+            ],
+            "index": "pypi",
+            "version": "==2021.5.29"
+        },
+        "platformdirs": {
+            "hashes": [
+                "sha256:367a5e80b3d04d2428ffa76d33f124cf11e8fff2acdaa9b43d545f5c7d661ef2",
+                "sha256:8868bbe3c3c80d42f20156f22e7131d2fb321f5bc86a2a345375c6481a67021d"
+            ],
+            "markers": "python_version >= '3.6'",
+            "version": "==2.4.0"
+        },
+        "pycodestyle": {
+            "hashes": [
+                "sha256:720f8b39dde8b293825e7ff02c475f3077124006db4f440dcbc9a20b76548a20",
+                "sha256:eddd5847ef438ea1c7870ca7eb78a9d47ce0cdb4851a5523949f2601d0cbbe7f"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
+            "version": "==2.8.0"
+        },
+        "pyflakes": {
+            "hashes": [
+                "sha256:05a85c2872edf37a4ed30b0cce2f6093e1d0581f8c19d7393122da7e25b2b24c",
+                "sha256:3bb3a3f256f4b7968c9c788781e4ff07dce46bdf12339dcda61053375426ee2e"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==2.4.0"
+        },
+        "six": {
+            "hashes": [
+                "sha256:1e61c37477a1626458e36f7b1d82aa5c9b094fa4802892072e49de9c60c4c926",
+                "sha256:8abb2f1d86890a2dfb989f9a77cfcfd3e47c2a354b01111771326f8aa26e0254"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==1.16.0"
+        },
+        "toml": {
+            "hashes": [
+                "sha256:806143ae5bfb6a3c6e736a764057db0e6a0e05e338b5630894a5f779cabb4f9b",
+                "sha256:b3bda1d108d5dd99f4a20d24d9c348e91c4db7ab1b749200bded2f839ccbe68f"
+            ],
+            "markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==0.10.2"
+        },
+        "typed-ast": {
+            "hashes": [
+                "sha256:01ae5f73431d21eead5015997ab41afa53aa1fbe252f9da060be5dad2c730ace",
+                "sha256:067a74454df670dcaa4e59349a2e5c81e567d8d65458d480a5b3dfecec08c5ff",
+                "sha256:0fb71b8c643187d7492c1f8352f2c15b4c4af3f6338f21681d3681b3dc31a266",
+                "sha256:1b3ead4a96c9101bef08f9f7d1217c096f31667617b58de957f690c92378b528",
+                "sha256:2068531575a125b87a41802130fa7e29f26c09a2833fea68d9a40cf33902eba6",
+                "sha256:209596a4ec71d990d71d5e0d312ac935d86930e6eecff6ccc7007fe54d703808",
+                "sha256:2c726c276d09fc5c414693a2de063f521052d9ea7c240ce553316f70656c84d4",
+                "sha256:398e44cd480f4d2b7ee8d98385ca104e35c81525dd98c519acff1b79bdaac363",
+                "sha256:52b1eb8c83f178ab787f3a4283f68258525f8d70f778a2f6dd54d3b5e5fb4341",
+                "sha256:5feca99c17af94057417d744607b82dd0a664fd5e4ca98061480fd8b14b18d04",
+                "sha256:7538e495704e2ccda9b234b82423a4038f324f3a10c43bc088a1636180f11a41",
+                "sha256:760ad187b1041a154f0e4d0f6aae3e40fdb51d6de16e5c99aedadd9246450e9e",
+                "sha256:777a26c84bea6cd934422ac2e3b78863a37017618b6e5c08f92ef69853e765d3",
+                "sha256:95431a26309a21874005845c21118c83991c63ea800dd44843e42a916aec5899",
+                "sha256:9ad2c92ec681e02baf81fdfa056fe0d818645efa9af1f1cd5fd6f1bd2bdfd805",
+                "sha256:9c6d1a54552b5330bc657b7ef0eae25d00ba7ffe85d9ea8ae6540d2197a3788c",
+                "sha256:aee0c1256be6c07bd3e1263ff920c325b59849dc95392a05f258bb9b259cf39c",
+                "sha256:af3d4a73793725138d6b334d9d247ce7e5f084d96284ed23f22ee626a7b88e39",
+                "sha256:b36b4f3920103a25e1d5d024d155c504080959582b928e91cb608a65c3a49e1a",
+                "sha256:b9574c6f03f685070d859e75c7f9eeca02d6933273b5e69572e5ff9d5e3931c3",
+                "sha256:bff6ad71c81b3bba8fa35f0f1921fb24ff4476235a6e94a26ada2e54370e6da7",
+                "sha256:c190f0899e9f9f8b6b7863debfb739abcb21a5c054f911ca3596d12b8a4c4c7f",
+                "sha256:c907f561b1e83e93fad565bac5ba9c22d96a54e7ea0267c708bffe863cbe4075",
+                "sha256:cae53c389825d3b46fb37538441f75d6aecc4174f615d048321b716df2757fb0",
+                "sha256:dd4a21253f42b8d2b48410cb31fe501d32f8b9fbeb1f55063ad102fe9c425e40",
+                "sha256:dde816ca9dac1d9c01dd504ea5967821606f02e510438120091b84e852367428",
+                "sha256:f2362f3cb0f3172c42938946dbc5b7843c2a28aec307c49100c8b38764eb6927",
+                "sha256:f328adcfebed9f11301eaedfa48e15bdece9b519fb27e6a8c01aa52a17ec31b3",
+                "sha256:f8afcf15cc511ada719a88e013cec87c11aff7b91f019295eb4530f96fe5ef2f",
+                "sha256:fb1bbeac803adea29cedd70781399c99138358c26d05fcbd23c13016b7f5ec65"
+            ],
+            "markers": "python_version < '3.8'",
+            "version": "==1.4.3"
+        },
+        "types-psycopg2": {
+            "hashes": [
+                "sha256:77ed80f2668582654623e04fb3d741ecce93effcc39c929d7e02f4a917a538ce",
+                "sha256:98a6e0e9580cd7eb4bd4d20f7c7063d154b2589a2b90c0ce4e3ca6085cde77c6"
+            ],
+            "index": "pypi",
+            "version": "==2.9.1"
+        },
+        "types-requests": {
+            "hashes": [
+                "sha256:b279284e51f668e38ee12d9665e4d789089f532dc2a0be4a1508ca0efd98ba9e",
+                "sha256:ba1d108d512e294b6080c37f6ae7cb2a2abf527560e2b671d1786c1fc46b541a"
+            ],
+            "index": "pypi",
+            "version": "==2.25.11"
+        },
+        "typing-extensions": {
+            "hashes": [
+                "sha256:49f75d16ff11f1cd258e1b988ccff82a3ca5570217d7ad8c5f48205dd99a677e",
+                "sha256:d8226d10bc02a29bcc81df19a26e56a9647f8b0a6d4a83924139f4a8b01f17b7",
+                "sha256:f1d25edafde516b146ecd0613dabcc61409817af4766fbbcfb8d1ad4ec441a34"
+            ],
+            "index": "pypi",
+            "version": "==3.10.0.2"
+        },
+        "virtualenv": {
+            "hashes": [
+                "sha256:4b02e52a624336eece99c96e3ab7111f469c24ba226a53ec474e8e787b365814",
+                "sha256:576d05b46eace16a9c348085f7d0dc8ef28713a2cabaa1cf0aea41e8f12c9218"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
+            "version": "==20.10.0"
+        },
+        "virtualenv-clone": {
+            "hashes": [
+                "sha256:418ee935c36152f8f153c79824bb93eaf6f0f7984bae31d3f48f350b9183501a",
+                "sha256:44d5263bceed0bac3e1424d64f798095233b64def1c5689afa43dc3223caf5b0"
+            ],
+            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
+            "version": "==0.5.7"
+        },
+        "yapf": {
+            "hashes": [
+                "sha256:408fb9a2b254c302f49db83c59f9aa0b4b0fd0ec25be3a5c51181327922ff63d",
+                "sha256:e3a234ba8455fe201eaa649cdac872d590089a18b661e39bbac7020978dd9c2e"
+            ],
+            "index": "pypi",
+            "version": "==0.31.0"
+        },
+        "zipp": {
+            "hashes": [
+                "sha256:71c644c5369f4a6e07636f0aa966270449561fcea2e3d6747b8d23efaa9d7832",
+                "sha256:9fe5ea21568a0a70e50f273397638d39b03353731e6cbbb3fd8502a33fec40bc"
+            ],
+            "markers": "python_version >= '3.6'",
+            "version": "==3.6.0"
+        }
+    }
+}

README.md

@@ -1,169 +1,82 @@
-[![Neon](https://user-images.githubusercontent.com/13738772/236813940-dcfdcb5b-69d3-449b-a686-013febe834d4.png)](https://neon.tech)
+# Zenith
 
-# Neon
-
-Neon is a serverless open-source alternative to AWS Aurora Postgres. It separates storage and compute and substitutes the PostgreSQL storage layer by redistributing data across a cluster of nodes.
-
-## Quick start
-Try the [Neon Free Tier](https://neon.tech/docs/introduction/technical-preview-free-tier/) to create a serverless Postgres instance. Then connect to it with your preferred Postgres client (psql, dbeaver, etc) or use the online [SQL Editor](https://neon.tech/docs/get-started-with-neon/query-with-neon-sql-editor/). See [Connect from any application](https://neon.tech/docs/connect/connect-from-any-app/) for connection instructions.
-
-Alternatively, compile and run the project [locally](#running-local-installation).
+Zenith is a serverless open source alternative to AWS Aurora Postgres. It separates storage and compute and substitutes PostgreSQL storage layer by redistributing data across a cluster of nodes.
 
 ## Architecture overview
 
-A Neon installation consists of compute nodes and the Neon storage engine. Compute nodes are stateless PostgreSQL nodes backed by the Neon storage engine.
+A Zenith installation consists of compute nodes and Zenith storage engine.
 
-The Neon storage engine consists of two major components:
-- Pageserver. Scalable storage backend for the compute nodes.
-- Safekeepers. The safekeepers form a redundant WAL service that received WAL from the compute node, and stores it durably until it has been processed by the pageserver and uploaded to cloud storage.
+Compute nodes are stateless PostgreSQL nodes, backed by Zenith storage engine.
 
-See developer documentation in [SUMMARY.md](/docs/SUMMARY.md) for more information.
+Zenith storage engine consists of two major components:
+- Pageserver. Scalable storage backend for compute nodes.
+- WAL service. The service that receives WAL from compute node and ensures that it is stored durably.
+
+Pageserver consists of:
+- Repository - Zenith storage implementation.
+- WAL receiver - service that receives WAL from WAL service and stores it in the repository.
+- Page service - service that communicates with compute nodes and responds with pages from the repository.
+- WAL redo - service that builds pages from base images and WAL records on Page service request.
 
 ## Running local installation
 
+1. Install build dependencies and other useful packages
 
-#### Installing dependencies on Linux
-1. Install build dependencies and other applicable packages
-
-* On Ubuntu or Debian, this set of packages should be sufficient to build the code:
-```bash
+On Ubuntu or Debian this set of packages should be sufficient to build the code:
+```text
 apt install build-essential libtool libreadline-dev zlib1g-dev flex bison libseccomp-dev \
-libssl-dev clang pkg-config libpq-dev cmake postgresql-client protobuf-compiler \
-libcurl4-openssl-dev
-```
-* On Fedora, these packages are needed:
-```bash
-dnf install flex bison readline-devel zlib-devel openssl-devel \
-  libseccomp-devel perl clang cmake postgresql postgresql-contrib protobuf-compiler \
-  protobuf-devel libcurl-devel
-```
-* On Arch based systems, these packages are needed:
-```bash
-pacman -S base-devel readline zlib libseccomp openssl clang \
-postgresql-libs cmake postgresql protobuf curl
+libssl-dev clang pkg-config libpq-dev
 ```
 
-Building Neon requires 3.15+ version of `protoc` (protobuf-compiler). If your distribution provides an older version, you can install a newer version from [here](https://github.com/protocolbuffers/protobuf/releases).
+[Rust] 1.55 or later is also required.
 
-2. [Install Rust](https://www.rust-lang.org/tools/install)
-```
-# recommended approach from https://www.rust-lang.org/tools/install
-curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
-```
-
-#### Installing dependencies on macOS (12.3.1)
-1. Install XCode and dependencies
-```
-xcode-select --install
-brew install protobuf openssl flex bison
-
-# add openssl to PATH, required for ed25519 keys generation in neon_local
-echo 'export PATH="$(brew --prefix openssl)/bin:$PATH"' >> ~/.zshrc
-```
-
-2. [Install Rust](https://www.rust-lang.org/tools/install)
-```
-# recommended approach from https://www.rust-lang.org/tools/install
-curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
-```
-
-3. Install PostgreSQL Client
-```
-# from https://stackoverflow.com/questions/44654216/correct-way-to-install-psql-without-full-postgres-on-macos
-brew install libpq
-brew link --force libpq
-```
-
-#### Rustc version
-
-The project uses [rust toolchain file](./rust-toolchain.toml) to define the version it's built with in CI for testing and local builds.
-
-This file is automatically picked up by [`rustup`](https://rust-lang.github.io/rustup/overrides.html#the-toolchain-file) that installs (if absent) and uses the toolchain version pinned in the file.
-
-rustup users who want to build with another toolchain can use [`rustup override`](https://rust-lang.github.io/rustup/overrides.html#directory-overrides) command to set a specific toolchain for the project's directory.
-
-non-rustup users most probably are not getting the same toolchain automatically from the file, so are responsible to manually verify their toolchain matches the version in the file.
-Newer rustc versions most probably will work fine, yet older ones might not be supported due to some new features used by the project or the crates.
-
-#### Building on Linux
-
-1. Build neon and patched postgres
-```
-# Note: The path to the neon sources can not contain a space.
-
-git clone --recursive https://github.com/neondatabase/neon.git
-cd neon
-
-# The preferred and default is to make a debug build. This will create a
-# demonstrably slower build than a release build. For a release build,
-# use "BUILD_TYPE=release make -j`nproc` -s"
-# Remove -s for the verbose build log
-
-make -j`nproc` -s
-```
-
-#### Building on OSX
-
-1. Build neon and patched postgres
-```
-# Note: The path to the neon sources can not contain a space.
-
-git clone --recursive https://github.com/neondatabase/neon.git
-cd neon
-
-# The preferred and default is to make a debug build. This will create a
-# demonstrably slower build than a release build. For a release build,
-# use "BUILD_TYPE=release make -j`sysctl -n hw.logicalcpu` -s"
-# Remove -s for the verbose build log
-
-make -j`sysctl -n hw.logicalcpu` -s
-```
-
-#### Dependency installation notes
-To run the `psql` client, install the `postgresql-client` package or modify `PATH` and `LD_LIBRARY_PATH` to include `pg_install/bin` and `pg_install/lib`, respectively.
+To run the `psql` client, install the `postgresql-client` package or modify `PATH` and `LD_LIBRARY_PATH` to include `tmp_install/bin` and `tmp_install/lib`, respectively.
 
 To run the integration tests or Python scripts (not required to use the code), install
-Python (3.9 or higher), and install python3 packages using `./scripts/pysync` (requires [poetry>=1.3](https://python-poetry.org/)) in the project directory.
+Python (3.7 or higher), and install python3 packages using `pipenv install` in the project directory.
 
-
-#### Running neon database
-1. Start pageserver and postgres on top of it (should be called from repo root):
+2. Build zenith and patched postgres
 ```sh
-# Create repository in .neon with proper paths to binaries and data
-# Later that would be responsibility of a package install script
-> cargo neon init
-Starting pageserver at '127.0.0.1:64000' in '.neon'.
-
-# start pageserver, safekeeper, and broker for their intercommunication
-> cargo neon start
-Starting neon broker at 127.0.0.1:50051
-storage_broker started, pid: 2918372
-Starting pageserver at '127.0.0.1:64000' in '.neon'.
-pageserver started, pid: 2918386
-Starting safekeeper at '127.0.0.1:5454' in '.neon/safekeepers/sk1'.
-safekeeper 1 started, pid: 2918437
-
-# create initial tenant and use it as a default for every future neon_local invocation
-> cargo neon tenant create --set-default
-tenant 9ef87a5bf0d92544f6fafeeb3239695c successfully created on the pageserver
-Created an initial timeline 'de200bd42b49cc1814412c7e592dd6e9' at Lsn 0/16B5A50 for tenant: 9ef87a5bf0d92544f6fafeeb3239695c
-Setting tenant 9ef87a5bf0d92544f6fafeeb3239695c as a default one
-
-# start postgres compute node
-> cargo neon endpoint start main
-Starting new endpoint main (PostgreSQL v14) on timeline de200bd42b49cc1814412c7e592dd6e9 ...
-Extracting base backup to create postgres instance: path=.neon/pgdatadirs/tenants/9ef87a5bf0d92544f6fafeeb3239695c/main port=55432
-Starting postgres at 'host=127.0.0.1 port=55432 user=cloud_admin dbname=postgres'
-
-# check list of running postgres instances
-> cargo neon endpoint list
- ENDPOINT  ADDRESS          TIMELINE                          BRANCH NAME  LSN        STATUS
- main      127.0.0.1:55432  de200bd42b49cc1814412c7e592dd6e9  main         0/16B5BA8  running
+git clone --recursive https://github.com/zenithdb/zenith.git
+cd zenith
+make -j5
 ```
 
-2. Now, it is possible to connect to postgres and run some queries:
+3. Start pageserver and postgres on top of it (should be called from repo root):
+```sh
+# Create repository in .zenith with proper paths to binaries and data
+# Later that would be responsibility of a package install script
+> ./target/debug/zenith init
+initializing tenantid c03ba6b7ad4c5e9cf556f059ade44229
+created initial timeline 5b014a9e41b4b63ce1a1febc04503636 timeline.lsn 0/169C3C8
+created main branch
+pageserver init succeeded
+
+# start pageserver and safekeeper
+> ./target/debug/zenith start
+Starting pageserver at 'localhost:64000' in '.zenith'
+Pageserver started
+initializing for single for 7676
+Starting safekeeper at 'localhost:5454' in '.zenith/safekeepers/single'
+Safekeeper started
+
+# start postgres compute node
+> ./target/debug/zenith pg start main
+Starting new postgres main on main...
+Extracting base backup to create postgres instance: path=.zenith/pgdatadirs/tenants/c03ba6b7ad4c5e9cf556f059ade44229/main port=55432
+Starting postgres node at 'host=127.0.0.1 port=55432 user=zenith_admin dbname=postgres'
+waiting for server to start.... done
+server started
+
+# check list of running postgres instances
+> ./target/debug/zenith pg list
+BRANCH	ADDRESS		LSN		STATUS
+main	127.0.0.1:55432	0/1609610	running
+```
+
+4. Now it is possible to connect to postgres and run some queries:
 ```text
-> psql -p55432 -h 127.0.0.1 -U cloud_admin postgres
+> psql -p55432 -h 127.0.0.1 -U zenith_admin postgres
 postgres=# CREATE TABLE t(key int primary key, value text);
 CREATE TABLE
 postgres=# insert into t values(1,1);
@@ -175,32 +88,25 @@ postgres=# select * from t;
 (1 row)
 ```
 
-3. And create branches and run postgres on them:
+5. And create branches and run postgres on them:
 ```sh
 # create branch named migration_check
-> cargo neon timeline branch --branch-name migration_check
-Created timeline 'b3b863fa45fa9e57e615f9f2d944e601' at Lsn 0/16F9A00 for tenant: 9ef87a5bf0d92544f6fafeeb3239695c. Ancestor timeline: 'main'
+> ./target/debug/zenith branch migration_check main
+Created branch 'migration_check' at 0/1609610
 
 # check branches tree
-> cargo neon timeline list
-(L) main [de200bd42b49cc1814412c7e592dd6e9]
-(L) ┗━ @0/16F9A00: migration_check [b3b863fa45fa9e57e615f9f2d944e601]
+> ./target/debug/zenith branch
+ main
+ ┗━ @0/1609610: migration_check
 
 # start postgres on that branch
-> cargo neon endpoint start migration_check --branch-name migration_check
-Starting new endpoint migration_check (PostgreSQL v14) on timeline b3b863fa45fa9e57e615f9f2d944e601 ...
-Extracting base backup to create postgres instance: path=.neon/pgdatadirs/tenants/9ef87a5bf0d92544f6fafeeb3239695c/migration_check port=55433
-Starting postgres at 'host=127.0.0.1 port=55433 user=cloud_admin dbname=postgres'
-
-# check the new list of running postgres instances
-> cargo neon endpoint list
- ENDPOINT         ADDRESS          TIMELINE                          BRANCH NAME      LSN        STATUS
- main             127.0.0.1:55432  de200bd42b49cc1814412c7e592dd6e9  main             0/16F9A38  running
- migration_check  127.0.0.1:55433  b3b863fa45fa9e57e615f9f2d944e601  migration_check  0/16F9A70  running
+> ./target/debug/zenith pg start migration_check
+Starting postgres node at 'host=127.0.0.1 port=55433 user=stas'
+waiting for server to start.... done
 
 # this new postgres instance will have all the data from 'main' postgres,
 # but all modifications would not affect data in original postgres
-> psql -p55433 -h 127.0.0.1 -U cloud_admin postgres
+> psql -p55433 -h 127.0.0.1 -U zenith_admin postgres
 postgres=# select * from t;
  key | value
 -----+-------
@@ -209,63 +115,44 @@ postgres=# select * from t;
 
 postgres=# insert into t values(2,2);
 INSERT 0 1
-
-# check that the new change doesn't affect the 'main' postgres
-> psql -p55432 -h 127.0.0.1 -U cloud_admin postgres
-postgres=# select * from t;
- key | value
------+-------
-   1 | 1
-(1 row)
 ```
 
-4. If you want to run tests afterward (see below), you must stop all the running of the pageserver, safekeeper, and postgres instances
-   you have just started. You can terminate them all with one command:
+6. If you want to run tests afterwards (see below), you have to stop all the running the pageserver, safekeeper and postgres instances
+   you have just started. You can stop them all with one command:
 ```sh
-> cargo neon stop
+> ./target/debug/zenith stop
 ```
 
 ## Running tests
 
-Ensure your dependencies are installed as described [here](https://github.com/neondatabase/neon#dependency-installation-notes).
-
 ```sh
-git clone --recursive https://github.com/neondatabase/neon.git
-
-CARGO_BUILD_FLAGS="--features=testing" make
-
-./scripts/pytest
+git clone --recursive https://github.com/zenithdb/zenith.git
+make # builds also postgres and installs it to ./tmp_install
+cd test_runner
+pipenv run pytest
 ```
 
 ## Documentation
 
-[docs](/docs) Contains a top-level overview of all available markdown documentation.
+Now we use README files to cover design ideas and overall architecture for each module and `rustdoc` style documentation comments. See also [/docs/](/docs/) a top-level overview of all available markdown documentation.
 
-- [sourcetree.md](/docs/sourcetree.md) contains overview of source tree layout.
+- [/docs/sourcetree.md](/docs/sourcetree.md) contains overview of source tree layout.
 
 To view your `rustdoc` documentation in a browser, try running `cargo doc --no-deps --open`
 
-See also README files in some source directories, and `rustdoc` style documentation comments.
-
-Other resources:
-
-- [SELECT 'Hello, World'](https://neon.tech/blog/hello-world/): Blog post by Nikita Shamgunov on the high level architecture
-- [Architecture decisions in Neon](https://neon.tech/blog/architecture-decisions-in-neon/): Blog post by Heikki Linnakangas
-- [Neon: Serverless PostgreSQL!](https://www.youtube.com/watch?v=rES0yzeERns): Presentation on storage system by Heikki Linnakangas in the CMU Database Group seminar series
-
 ### Postgres-specific terms
 
-Due to Neon's very close relation with PostgreSQL internals, numerous specific terms are used.
-The same applies to certain spelling: i.e. we use MB to denote 1024 * 1024 bytes, while MiB would be technically more correct, it's inconsistent with what PostgreSQL code and its documentation use.
+Due to Zenith's very close relation with PostgreSQL internals, there are numerous specific terms used.
+Same applies to certain spelling: i.e. we use MB to denote 1024 * 1024 bytes, while MiB would be technically more correct, it's inconsistent with what PostgreSQL code and its documentation use.
 
 To get more familiar with this aspect, refer to:
 
-- [Neon glossary](/docs/glossary.md)
-- [PostgreSQL glossary](https://www.postgresql.org/docs/14/glossary.html)
-- Other PostgreSQL documentation and sources (Neon fork sources can be found [here](https://github.com/neondatabase/postgres))
+- [Zenith glossary](/docs/glossary.md)
+- [PostgreSQL glossary](https://www.postgresql.org/docs/13/glossary.html)
+- Other PostgreSQL documentation and sources (Zenith fork sources can be found [here](https://github.com/zenithdb/postgres))
 
 ## Join the development
 
-- Read [CONTRIBUTING.md](/CONTRIBUTING.md) to learn about project code style and practices.
-- To get familiar with a source tree layout, use [sourcetree.md](/docs/sourcetree.md).
+- Read `CONTRIBUTING.md` to learn about project code style and practices.
+- To get familiar with a source tree layout, use [/docs/sourcetree.md](/docs/sourcetree.md).
 - To learn more about PostgreSQL internals, check http://www.interdb.jp/pg/index.html

cli-v2-story.md

@@ -0,0 +1,188 @@
+Create a new Zenith repository in the current directory:
+
+    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli init
+    The files belonging to this database system will be owned by user "heikki".
+    This user must also own the server process.
+    
+    The database cluster will be initialized with locale "en_GB.UTF-8".
+    The default database encoding has accordingly been set to "UTF8".
+    The default text search configuration will be set to "english".
+    
+    Data page checksums are disabled.
+    
+    creating directory tmp ... ok
+    creating subdirectories ... ok
+    selecting dynamic shared memory implementation ... posix
+    selecting default max_connections ... 100
+    selecting default shared_buffers ... 128MB
+    selecting default time zone ... Europe/Helsinki
+    creating configuration files ... ok
+    running bootstrap script ... ok
+    performing post-bootstrap initialization ... ok
+    syncing data to disk ... ok
+    
+    initdb: warning: enabling "trust" authentication for local connections
+    You can change this by editing pg_hba.conf or using the option -A, or
+    --auth-local and --auth-host, the next time you run initdb.
+    new zenith repository was created in .zenith
+
+Initially, there is only one branch:
+
+    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli branch
+      main
+
+Start a local Postgres instance on the branch:
+
+    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli start main
+    Creating data directory from snapshot at 0/15FFB08...
+    waiting for server to start....2021-04-13 09:27:43.919 EEST [984664] LOG:  starting PostgreSQL 14devel on x86_64-pc-linux-gnu, compiled by gcc (Debian 10.2.1-6) 10.2.1 20210110, 64-bit
+    2021-04-13 09:27:43.920 EEST [984664] LOG:  listening on IPv6 address "::1", port 5432
+    2021-04-13 09:27:43.920 EEST [984664] LOG:  listening on IPv4 address "127.0.0.1", port 5432
+    2021-04-13 09:27:43.927 EEST [984664] LOG:  listening on Unix socket "/tmp/.s.PGSQL.5432"
+    2021-04-13 09:27:43.939 EEST [984665] LOG:  database system was interrupted; last known up at 2021-04-13 09:27:33 EEST
+    2021-04-13 09:27:43.939 EEST [984665] LOG:  creating missing WAL directory "pg_wal/archive_status"
+    2021-04-13 09:27:44.189 EEST [984665] LOG:  database system was not properly shut down; automatic recovery in progress
+    2021-04-13 09:27:44.195 EEST [984665] LOG:  invalid record length at 0/15FFB80: wanted 24, got 0
+    2021-04-13 09:27:44.195 EEST [984665] LOG:  redo is not required
+    2021-04-13 09:27:44.225 EEST [984664] LOG:  database system is ready to accept connections
+     done
+    server started
+
+Run some commands against it:
+
+    ~/git-sandbox/zenith (cli-v2)$ psql postgres -c "create table foo (t text);" 
+    CREATE TABLE
+    ~/git-sandbox/zenith (cli-v2)$ psql postgres -c "insert into foo values ('inserted on the main branch');" 
+    INSERT 0 1
+    ~/git-sandbox/zenith (cli-v2)$ psql postgres -c "select * from foo" 
+                  t              
+    -----------------------------
+     inserted on the main branch
+    (1 row)
+
+Create a new branch called 'experimental'. We create it from the
+current end of the 'main' branch, but you could specify a different
+LSN as the start point instead.
+
+    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli branch experimental main
+    branching at end of WAL: 0/161F478
+    
+    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli branch 
+      experimental
+      main
+
+Start another Postgres instance off the 'experimental' branch:
+
+    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli start experimental -- -o -p5433
+    Creating data directory from snapshot at 0/15FFB08...
+    waiting for server to start....2021-04-13 09:28:41.874 EEST [984766] LOG:  starting PostgreSQL 14devel on x86_64-pc-linux-gnu, compiled by gcc (Debian 10.2.1-6) 10.2.1 20210110, 64-bit
+    2021-04-13 09:28:41.875 EEST [984766] LOG:  listening on IPv6 address "::1", port 5433
+    2021-04-13 09:28:41.875 EEST [984766] LOG:  listening on IPv4 address "127.0.0.1", port 5433
+    2021-04-13 09:28:41.883 EEST [984766] LOG:  listening on Unix socket "/tmp/.s.PGSQL.5433"
+    2021-04-13 09:28:41.896 EEST [984767] LOG:  database system was interrupted; last known up at 2021-04-13 09:27:33 EEST
+    2021-04-13 09:28:42.265 EEST [984767] LOG:  database system was not properly shut down; automatic recovery in progress
+    2021-04-13 09:28:42.269 EEST [984767] LOG:  redo starts at 0/15FFB80
+    2021-04-13 09:28:42.272 EEST [984767] LOG:  invalid record length at 0/161F4B0: wanted 24, got 0
+    2021-04-13 09:28:42.272 EEST [984767] LOG:  redo done at 0/161F478 system usage: CPU: user: 0.00 s, system: 0.00 s, elapsed: 0.00 s
+    2021-04-13 09:28:42.321 EEST [984766] LOG:  database system is ready to accept connections
+     done
+    server started
+
+Insert some a row on the 'experimental' branch:
+
+    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5433 -c "select * from foo" 
+                  t              
+    -----------------------------
+     inserted on the main branch
+    (1 row)
+    
+    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5433 -c "insert into foo values ('inserted on experimental')" 
+    INSERT 0 1
+    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5433 -c "select * from foo" 
+                  t              
+    -----------------------------
+     inserted on the main branch
+     inserted on experimental
+    (2 rows)
+    
+See that the other Postgres instance is still running on 'main' branch on port 5432:
+
+
+    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5432 -c "select * from foo" 
+                  t              
+    -----------------------------
+     inserted on the main branch
+    (1 row)
+
+
+
+
+Everything is stored in the .zenith directory:
+
+    ~/git-sandbox/zenith (cli-v2)$ ls -l .zenith/
+    total 12
+    drwxr-xr-x 4 heikki heikki 4096 Apr 13 09:28 datadirs
+    drwxr-xr-x 4 heikki heikki 4096 Apr 13 09:27 refs
+    drwxr-xr-x 4 heikki heikki 4096 Apr 13 09:28 timelines
+
+The 'datadirs' directory contains the datadirs of the running instances:
+
+    ~/git-sandbox/zenith (cli-v2)$ ls -l .zenith/datadirs/
+    total 8
+    drwx------ 18 heikki heikki 4096 Apr 13 09:27 3c0c634c1674079b2c6d4edf7c91523e
+    drwx------ 18 heikki heikki 4096 Apr 13 09:28 697e3c103d4b1763cd6e82e4ff361d76
+    ~/git-sandbox/zenith (cli-v2)$ ls -l .zenith/datadirs/3c0c634c1674079b2c6d4edf7c91523e/
+    total 124
+    drwxr-xr-x 5 heikki heikki  4096 Apr 13 09:27 base
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 global
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_commit_ts
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_dynshmem
+    -rw------- 1 heikki heikki  4760 Apr 13 09:27 pg_hba.conf
+    -rw------- 1 heikki heikki  1636 Apr 13 09:27 pg_ident.conf
+    drwxr-xr-x 4 heikki heikki  4096 Apr 13 09:32 pg_logical
+    drwxr-xr-x 4 heikki heikki  4096 Apr 13 09:27 pg_multixact
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_notify
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_replslot
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_serial
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_snapshots
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_stat
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:34 pg_stat_tmp
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_subtrans
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_tblspc
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_twophase
+    -rw------- 1 heikki heikki     3 Apr 13 09:27 PG_VERSION
+    lrwxrwxrwx 1 heikki heikki    52 Apr 13 09:27 pg_wal -> ../../timelines/3c0c634c1674079b2c6d4edf7c91523e/wal
+    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_xact
+    -rw------- 1 heikki heikki    88 Apr 13 09:27 postgresql.auto.conf
+    -rw------- 1 heikki heikki 28688 Apr 13 09:27 postgresql.conf
+    -rw------- 1 heikki heikki    96 Apr 13 09:27 postmaster.opts
+    -rw------- 1 heikki heikki   149 Apr 13 09:27 postmaster.pid
+
+Note how 'pg_wal' is just a symlink to the 'timelines' directory. The
+datadir is ephemeral, you can delete it at any time, and it can be reconstructed
+from the snapshots and WAL stored in the 'timelines' directory. So if you push/pull
+the repository, the 'datadirs' are not included. (They are like git working trees)
+
+    ~/git-sandbox/zenith (cli-v2)$ killall -9 postgres
+    ~/git-sandbox/zenith (cli-v2)$ rm -rf .zenith/datadirs/*
+    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli start experimental -- -o -p5433
+    Creating data directory from snapshot at 0/15FFB08...
+    waiting for server to start....2021-04-13 09:37:05.476 EEST [985340] LOG:  starting PostgreSQL 14devel on x86_64-pc-linux-gnu, compiled by gcc (Debian 10.2.1-6) 10.2.1 20210110, 64-bit
+    2021-04-13 09:37:05.477 EEST [985340] LOG:  listening on IPv6 address "::1", port 5433
+    2021-04-13 09:37:05.477 EEST [985340] LOG:  listening on IPv4 address "127.0.0.1", port 5433
+    2021-04-13 09:37:05.487 EEST [985340] LOG:  listening on Unix socket "/tmp/.s.PGSQL.5433"
+    2021-04-13 09:37:05.498 EEST [985341] LOG:  database system was interrupted; last known up at 2021-04-13 09:27:33 EEST
+    2021-04-13 09:37:05.808 EEST [985341] LOG:  database system was not properly shut down; automatic recovery in progress
+    2021-04-13 09:37:05.813 EEST [985341] LOG:  redo starts at 0/15FFB80
+    2021-04-13 09:37:05.815 EEST [985341] LOG:  invalid record length at 0/161F770: wanted 24, got 0
+    2021-04-13 09:37:05.815 EEST [985341] LOG:  redo done at 0/161F738 system usage: CPU: user: 0.00 s, system: 0.00 s, elapsed: 0.00 s
+    2021-04-13 09:37:05.866 EEST [985340] LOG:  database system is ready to accept connections
+     done
+    server started
+    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5433 -c "select * from foo" 
+                  t              
+    -----------------------------
+     inserted on the main branch
+     inserted on experimental
+    (2 rows)
+

compute_tools/Cargo.toml

@@ -1,32 +1,28 @@
 [package]
 name = "compute_tools"
 version = "0.1.0"
-edition.workspace = true
-license.workspace = true
+authors = ["Alexey Kondratov <kondratov.aleksey@gmail.com>"]
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[workspace]
+# TODO: make it a part of global zenith worksapce
 
 [dependencies]
-anyhow.workspace = true
-chrono.workspace = true
-clap.workspace = true
-futures.workspace = true
-hyper = { workspace = true, features = ["full"] }
-notify.workspace = true
-num_cpus.workspace = true
-opentelemetry.workspace = true
-postgres.workspace = true
-regex.workspace = true
-serde.workspace = true
-serde_json.workspace = true
-tar.workspace = true
-reqwest = { workspace = true, features = ["json"] }
-tokio = { workspace = true, features = ["rt", "rt-multi-thread"] }
-tokio-postgres.workspace = true
-tracing.workspace = true
-tracing-opentelemetry.workspace = true
-tracing-subscriber.workspace = true
-tracing-utils.workspace = true
-url.workspace = true
+libc = "0.2"
+anyhow = "1.0"
+chrono = "0.4"
+clap = "2.33"
+env_logger = "0.8"
+hyper = { version = "0.14", features = ["full"] }
+log = { version = "0.4", features = ["std", "serde"] }
+postgres = "0.19"
+regex = "1"
+serde = { version = "1.0", features = ["derive"] }
+serde_json = "1.0"
+tar = "0.4"
+tokio = { version = "1", features = ["full"] }
 
-compute_api.workspace = true
-utils.workspace = true
-workspace_hack.workspace = true
+[profile.release]
+debug = true

compute_tools/Dockerfile

@@ -0,0 +1,14 @@
+# First transient image to build compute_tools binaries
+FROM rust:slim-buster AS rust-build
+
+RUN mkdir /compute_tools
+WORKDIR /compute_tools
+
+COPY . /compute_tools/
+
+RUN cargo build --release
+
+# Final image that only has one binary
+FROM debian:buster-slim
+
+COPY --from=rust-build /compute_tools/target/release/zenith_ctl /usr/local/bin/zenith_ctl

compute_tools/README.md

@@ -1,9 +1,9 @@
 # Compute node tools
 
-Postgres wrapper (`compute_ctl`) is intended to be run as a Docker entrypoint or as a `systemd`
-`ExecStart` option. It will handle all the `Neon` specifics during compute node
+Postgres wrapper (`zenith_ctl`) is intended to be run as a Docker entrypoint or as a `systemd`
+`ExecStart` option. It will handle all the `zenith` specifics during compute node
 initialization:
-- `compute_ctl` accepts cluster (compute node) specification as a JSON file.
+- `zenith_ctl` accepts cluster (compute node) specification as a JSON file.
 - Every start is a fresh start, so the data directory is removed and
   initialized again on each run.
 - Next it will put configuration files into the `PGDATA` directory.
@@ -13,22 +13,18 @@ initialization:
 - Check and alter/drop/create roles and databases.
 - Hang waiting on the `postmaster` process to exit.
 
-Also `compute_ctl` spawns two separate service threads:
+Also `zenith_ctl` spawns two separate service threads:
 - `compute-monitor` checks the last Postgres activity timestamp and saves it
-  into the shared `ComputeNode`;
+  into the shared `ComputeState`;
 - `http-endpoint` runs a Hyper HTTP API server, which serves readiness and the
   last activity requests.
 
-If the `vm-informant` binary is present at `/bin/vm-informant`, it will also be started. For VM
-compute nodes, `vm-informant` communicates with the VM autoscaling system. It coordinates
-downscaling and (eventually) will request immediate upscaling under resource pressure.
-
 Usage example:
 ```sh
-compute_ctl -D /var/db/postgres/compute \
-            -C 'postgresql://cloud_admin@localhost/postgres' \
-            -S /var/db/postgres/specs/current.json \
-            -b /usr/local/bin/postgres
+zenith_ctl -D /var/db/postgres/compute \
+           -C 'postgresql://zenith_admin@localhost/postgres' \
+           -S /var/db/postgres/specs/current.json \
+           -b /usr/local/bin/postgres
 ```
 
 ## Tests

compute_tools/src/bin/compute_ctl.rs

@@ -1,351 +0,0 @@
-//!
-//! Postgres wrapper (`compute_ctl`) is intended to be run as a Docker entrypoint or as a `systemd`
-//! `ExecStart` option. It will handle all the `Neon` specifics during compute node
-//! initialization:
-//! - `compute_ctl` accepts cluster (compute node) specification as a JSON file.
-//! - Every start is a fresh start, so the data directory is removed and
-//!   initialized again on each run.
-//! - Next it will put configuration files into the `PGDATA` directory.
-//! - Sync safekeepers and get commit LSN.
-//! - Get `basebackup` from pageserver using the returned on the previous step LSN.
-//! - Try to start `postgres` and wait until it is ready to accept connections.
-//! - Check and alter/drop/create roles and databases.
-//! - Hang waiting on the `postmaster` process to exit.
-//!
-//! Also `compute_ctl` spawns two separate service threads:
-//! - `compute-monitor` checks the last Postgres activity timestamp and saves it
-//!   into the shared `ComputeNode`;
-//! - `http-endpoint` runs a Hyper HTTP API server, which serves readiness and the
-//!   last activity requests.
-//!
-//! If the `vm-informant` binary is present at `/bin/vm-informant`, it will also be started. For VM
-//! compute nodes, `vm-informant` communicates with the VM autoscaling system. It coordinates
-//! downscaling and (eventually) will request immediate upscaling under resource pressure.
-//!
-//! Usage example:
-//! ```sh
-//! compute_ctl -D /var/db/postgres/compute \
-//!             -C 'postgresql://cloud_admin@localhost/postgres' \
-//!             -S /var/db/postgres/specs/current.json \
-//!             -b /usr/local/bin/postgres
-//! ```
-//!
-use std::collections::HashMap;
-use std::fs::File;
-use std::panic;
-use std::path::Path;
-use std::process::exit;
-use std::sync::{mpsc, Arc, Condvar, Mutex};
-use std::{thread, time::Duration};
-
-use anyhow::{Context, Result};
-use chrono::Utc;
-use clap::Arg;
-use tracing::{error, info};
-use url::Url;
-
-use compute_api::responses::ComputeStatus;
-
-use compute_tools::compute::{ComputeNode, ComputeState, ParsedSpec};
-use compute_tools::configurator::launch_configurator;
-use compute_tools::http::api::launch_http_server;
-use compute_tools::logger::*;
-use compute_tools::monitor::launch_monitor;
-use compute_tools::params::*;
-use compute_tools::spec::*;
-
-fn main() -> Result<()> {
-    init_tracing_and_logging(DEFAULT_LOG_LEVEL)?;
-
-    let matches = cli().get_matches();
-
-    let http_port = *matches
-        .get_one::<u16>("http-port")
-        .expect("http-port is required");
-    let pgdata = matches
-        .get_one::<String>("pgdata")
-        .expect("PGDATA path is required");
-    let connstr = matches
-        .get_one::<String>("connstr")
-        .expect("Postgres connection string is required");
-    let spec_json = matches.get_one::<String>("spec");
-    let spec_path = matches.get_one::<String>("spec-path");
-
-    // Extract OpenTelemetry context for the startup actions from the
-    // TRACEPARENT and TRACESTATE env variables, and attach it to the current
-    // tracing context.
-    //
-    // This is used to propagate the context for the 'start_compute' operation
-    // from the neon control plane. This allows linking together the wider
-    // 'start_compute' operation that creates the compute container, with the
-    // startup actions here within the container.
-    //
-    // There is no standard for passing context in env variables, but a lot of
-    // tools use TRACEPARENT/TRACESTATE, so we use that convention too. See
-    // https://github.com/open-telemetry/opentelemetry-specification/issues/740
-    //
-    // Switch to the startup context here, and exit it once the startup has
-    // completed and Postgres is up and running.
-    //
-    // If this pod is pre-created without binding it to any particular endpoint
-    // yet, this isn't the right place to enter the startup context. In that
-    // case, the control plane should pass the tracing context as part of the
-    // /configure API call.
-    //
-    // NOTE: This is supposed to only cover the *startup* actions. Once
-    // postgres is configured and up-and-running, we exit this span. Any other
-    // actions that are performed on incoming HTTP requests, for example, are
-    // performed in separate spans.
-    //
-    // XXX: If the pod is restarted, we perform the startup actions in the same
-    // context as the original startup actions, which probably doesn't make
-    // sense.
-    let mut startup_tracing_carrier: HashMap<String, String> = HashMap::new();
-    if let Ok(val) = std::env::var("TRACEPARENT") {
-        startup_tracing_carrier.insert("traceparent".to_string(), val);
-    }
-    if let Ok(val) = std::env::var("TRACESTATE") {
-        startup_tracing_carrier.insert("tracestate".to_string(), val);
-    }
-    let startup_context_guard = if !startup_tracing_carrier.is_empty() {
-        use opentelemetry::propagation::TextMapPropagator;
-        use opentelemetry::sdk::propagation::TraceContextPropagator;
-        let guard = TraceContextPropagator::new()
-            .extract(&startup_tracing_carrier)
-            .attach();
-        info!("startup tracing context attached");
-        Some(guard)
-    } else {
-        None
-    };
-
-    let compute_id = matches.get_one::<String>("compute-id");
-    let control_plane_uri = matches.get_one::<String>("control-plane-uri");
-
-    // Try to use just 'postgres' if no path is provided
-    let pgbin = matches.get_one::<String>("pgbin").unwrap();
-
-    let spec;
-    let mut live_config_allowed = false;
-    match spec_json {
-        // First, try to get cluster spec from the cli argument
-        Some(json) => {
-            spec = Some(serde_json::from_str(json)?);
-        }
-        None => {
-            // Second, try to read it from the file if path is provided
-            if let Some(sp) = spec_path {
-                let path = Path::new(sp);
-                let file = File::open(path)?;
-                spec = Some(serde_json::from_reader(file)?);
-            } else if let Some(id) = compute_id {
-                if let Some(cp_base) = control_plane_uri {
-                    live_config_allowed = true;
-                    spec = match get_spec_from_control_plane(cp_base, id) {
-                        Ok(s) => s,
-                        Err(e) => {
-                            error!("cannot get response from control plane: {}", e);
-                            panic!("neither spec nor confirmation that compute is in the Empty state was received");
-                        }
-                    };
-                } else {
-                    panic!("must specify both --control-plane-uri and --compute-id or none");
-                }
-            } else {
-                panic!(
-                    "compute spec should be provided by one of the following ways: \
-                    --spec OR --spec-path OR --control-plane-uri and --compute-id"
-                );
-            }
-        }
-    };
-
-    let mut new_state = ComputeState::new();
-    let spec_set;
-    if let Some(spec) = spec {
-        let pspec = ParsedSpec::try_from(spec).map_err(|msg| anyhow::anyhow!(msg))?;
-        new_state.pspec = Some(pspec);
-        spec_set = true;
-    } else {
-        spec_set = false;
-    }
-    let compute_node = ComputeNode {
-        connstr: Url::parse(connstr).context("cannot parse connstr as a URL")?,
-        pgdata: pgdata.to_string(),
-        pgbin: pgbin.to_string(),
-        live_config_allowed,
-        state: Mutex::new(new_state),
-        state_changed: Condvar::new(),
-    };
-    let compute = Arc::new(compute_node);
-
-    // Launch http service first, so we were able to serve control-plane
-    // requests, while configuration is still in progress.
-    let _http_handle =
-        launch_http_server(http_port, &compute).expect("cannot launch http endpoint thread");
-
-    if !spec_set {
-        // No spec provided, hang waiting for it.
-        info!("no compute spec provided, waiting");
-        let mut state = compute.state.lock().unwrap();
-        while state.status != ComputeStatus::ConfigurationPending {
-            state = compute.state_changed.wait(state).unwrap();
-
-            if state.status == ComputeStatus::ConfigurationPending {
-                info!("got spec, continue configuration");
-                // Spec is already set by the http server handler.
-                break;
-            }
-        }
-    }
-
-    // We got all we need, update the state.
-    let mut state = compute.state.lock().unwrap();
-
-    // Record for how long we slept waiting for the spec.
-    state.metrics.wait_for_spec_ms = Utc::now()
-        .signed_duration_since(state.start_time)
-        .to_std()
-        .unwrap()
-        .as_millis() as u64;
-    // Reset start time to the actual start of the configuration, so that
-    // total startup time was properly measured at the end.
-    state.start_time = Utc::now();
-
-    state.status = ComputeStatus::Init;
-    compute.state_changed.notify_all();
-    drop(state);
-
-    // Launch remaining service threads
-    let _monitor_handle = launch_monitor(&compute).expect("cannot launch compute monitor thread");
-    let _configurator_handle =
-        launch_configurator(&compute).expect("cannot launch configurator thread");
-
-    // Start Postgres
-    let mut delay_exit = false;
-    let mut exit_code = None;
-    let pg = match compute.start_compute() {
-        Ok(pg) => Some(pg),
-        Err(err) => {
-            error!("could not start the compute node: {:?}", err);
-            let mut state = compute.state.lock().unwrap();
-            state.error = Some(format!("{:?}", err));
-            state.status = ComputeStatus::Failed;
-            drop(state);
-            delay_exit = true;
-            None
-        }
-    };
-
-    // Wait for the child Postgres process forever. In this state Ctrl+C will
-    // propagate to Postgres and it will be shut down as well.
-    if let Some(mut pg) = pg {
-        // Startup is finished, exit the startup tracing span
-        drop(startup_context_guard);
-
-        let ecode = pg
-            .wait()
-            .expect("failed to start waiting on Postgres process");
-        info!("Postgres exited with code {}, shutting down", ecode);
-        exit_code = ecode.code()
-    }
-
-    if let Err(err) = compute.check_for_core_dumps() {
-        error!("error while checking for core dumps: {err:?}");
-    }
-
-    // If launch failed, keep serving HTTP requests for a while, so the cloud
-    // control plane can get the actual error.
-    if delay_exit {
-        info!("giving control plane 30s to collect the error before shutdown");
-        thread::sleep(Duration::from_secs(30));
-    }
-
-    // Shutdown trace pipeline gracefully, so that it has a chance to send any
-    // pending traces before we exit. Shutting down OTEL tracing provider may
-    // hang for quite some time, see, for example:
-    // - https://github.com/open-telemetry/opentelemetry-rust/issues/868
-    // - and our problems with staging https://github.com/neondatabase/cloud/issues/3707#issuecomment-1493983636
-    //
-    // Yet, we want computes to shut down fast enough, as we may need a new one
-    // for the same timeline ASAP. So wait no longer than 2s for the shutdown to
-    // complete, then just error out and exit the main thread.
-    info!("shutting down tracing");
-    let (sender, receiver) = mpsc::channel();
-    let _ = thread::spawn(move || {
-        tracing_utils::shutdown_tracing();
-        sender.send(()).ok()
-    });
-    let shutdown_res = receiver.recv_timeout(Duration::from_millis(2000));
-    if shutdown_res.is_err() {
-        error!("timed out while shutting down tracing, exiting anyway");
-    }
-
-    info!("shutting down");
-    exit(exit_code.unwrap_or(1))
-}
-
-fn cli() -> clap::Command {
-    // Env variable is set by `cargo`
-    let version = option_env!("CARGO_PKG_VERSION").unwrap_or("unknown");
-    clap::Command::new("compute_ctl")
-        .version(version)
-        .arg(
-            Arg::new("http-port")
-                .long("http-port")
-                .value_name("HTTP_PORT")
-                .default_value("3080")
-                .value_parser(clap::value_parser!(u16))
-                .required(false),
-        )
-        .arg(
-            Arg::new("connstr")
-                .short('C')
-                .long("connstr")
-                .value_name("DATABASE_URL")
-                .required(true),
-        )
-        .arg(
-            Arg::new("pgdata")
-                .short('D')
-                .long("pgdata")
-                .value_name("DATADIR")
-                .required(true),
-        )
-        .arg(
-            Arg::new("pgbin")
-                .short('b')
-                .long("pgbin")
-                .default_value("postgres")
-                .value_name("POSTGRES_PATH"),
-        )
-        .arg(
-            Arg::new("spec")
-                .short('s')
-                .long("spec")
-                .value_name("SPEC_JSON"),
-        )
-        .arg(
-            Arg::new("spec-path")
-                .short('S')
-                .long("spec-path")
-                .value_name("SPEC_PATH"),
-        )
-        .arg(
-            Arg::new("compute-id")
-                .short('i')
-                .long("compute-id")
-                .value_name("COMPUTE_ID"),
-        )
-        .arg(
-            Arg::new("control-plane-uri")
-                .short('p')
-                .long("control-plane-uri")
-                .value_name("CONTROL_PLANE_API_BASE_URI"),
-        )
-}
-
-#[test]
-fn verify_cli() {
-    cli().debug_assert()
-}

compute_tools/src/bin/zenith_ctl.rs

@@ -0,0 +1,251 @@
+//!
+//! Postgres wrapper (`zenith_ctl`) is intended to be run as a Docker entrypoint or as a `systemd`
+//! `ExecStart` option. It will handle all the `zenith` specifics during compute node
+//! initialization:
+//! - `zenith_ctl` accepts cluster (compute node) specification as a JSON file.
+//! - Every start is a fresh start, so the data directory is removed and
+//!   initialized again on each run.
+//! - Next it will put configuration files into the `PGDATA` directory.
+//! - Sync safekeepers and get commit LSN.
+//! - Get `basebackup` from pageserver using the returned on the previous step LSN.
+//! - Try to start `postgres` and wait until it is ready to accept connections.
+//! - Check and alter/drop/create roles and databases.
+//! - Hang waiting on the `postmaster` process to exit.
+//!
+//! Also `zenith_ctl` spawns two separate service threads:
+//! - `compute-monitor` checks the last Postgres activity timestamp and saves it
+//!   into the shared `ComputeState`;
+//! - `http-endpoint` runs a Hyper HTTP API server, which serves readiness and the
+//!   last activity requests.
+//!
+//! Usage example:
+//! ```sh
+//! zenith_ctl -D /var/db/postgres/compute \
+//!            -C 'postgresql://zenith_admin@localhost/postgres' \
+//!            -S /var/db/postgres/specs/current.json \
+//!            -b /usr/local/bin/postgres
+//! ```
+//!
+use std::fs::File;
+use std::path::Path;
+use std::process::{exit, Command, ExitStatus};
+use std::sync::{Arc, RwLock};
+use std::{env, panic};
+
+use anyhow::Result;
+use chrono::Utc;
+use libc::{prctl, PR_SET_PDEATHSIG, SIGINT};
+use log::info;
+use postgres::{Client, NoTls};
+
+use compute_tools::config;
+use compute_tools::http_api::launch_http_server;
+use compute_tools::logger::*;
+use compute_tools::monitor::launch_monitor;
+use compute_tools::params::*;
+use compute_tools::pg_helpers::*;
+use compute_tools::spec::*;
+use compute_tools::zenith::*;
+
+/// Do all the preparations like PGDATA directory creation, configuration,
+/// safekeepers sync, basebackup, etc.
+fn prepare_pgdata(state: &Arc<RwLock<ComputeState>>) -> Result<()> {
+    let state = state.read().unwrap();
+    let spec = &state.spec;
+    let pgdata_path = Path::new(&state.pgdata);
+    let pageserver_connstr = spec
+        .cluster
+        .settings
+        .find("zenith.page_server_connstring")
+        .expect("pageserver connstr should be provided");
+    let tenant = spec
+        .cluster
+        .settings
+        .find("zenith.zenith_tenant")
+        .expect("tenant id should be provided");
+    let timeline = spec
+        .cluster
+        .settings
+        .find("zenith.zenith_timeline")
+        .expect("tenant id should be provided");
+
+    info!(
+        "applying spec for cluster #{}, operation #{}",
+        spec.cluster.cluster_id,
+        spec.operation_uuid.as_ref().unwrap()
+    );
+
+    // Remove/create an empty pgdata directory and put configuration there.
+    create_pgdata(&state.pgdata)?;
+    config::write_postgres_conf(&pgdata_path.join("postgresql.conf"), spec)?;
+
+    info!("starting safekeepers syncing");
+    let lsn = sync_safekeepers(&state.pgdata, &state.pgbin)?;
+    info!("safekeepers synced at LSN {}", lsn);
+
+    get_basebackup(&state.pgdata, &pageserver_connstr, &tenant, &timeline, &lsn)?;
+    // Update pg_hba.conf received with basebackup.
+    update_pg_hba(pgdata_path)?;
+
+    Ok(())
+}
+
+/// Start Postgres as a child process and manage DBs/roles.
+/// After that this will hang waiting on the postmaster process to exit.
+fn run_compute(state: &Arc<RwLock<ComputeState>>) -> Result<ExitStatus> {
+    let read_state = state.read().unwrap();
+    let pgdata_path = Path::new(&read_state.pgdata);
+
+    // Run postgres as a child process.
+    let mut pg = Command::new(&read_state.pgbin)
+        .args(&["-D", &read_state.pgdata])
+        .spawn()
+        .expect("cannot start postgres process");
+
+    // Try default Postgres port if it is not provided
+    let port = read_state
+        .spec
+        .cluster
+        .settings
+        .find("port")
+        .unwrap_or_else(|| "5432".to_string());
+    wait_for_postgres(&port, pgdata_path)?;
+
+    let mut client = Client::connect(&read_state.connstr, NoTls)?;
+
+    handle_roles(&read_state.spec, &mut client)?;
+    handle_databases(&read_state.spec, &mut client)?;
+
+    // 'Close' connection
+    drop(client);
+
+    info!(
+        "finished configuration of cluster #{}",
+        read_state.spec.cluster.cluster_id
+    );
+
+    // Release the read lock.
+    drop(read_state);
+
+    // Get the write lock, update state and release the lock, so HTTP API
+    // was able to serve requests, while we are blocked waiting on
+    // Postgres.
+    let mut state = state.write().unwrap();
+    state.ready = true;
+    drop(state);
+
+    // Wait for child postgres process basically forever. In this state Ctrl+C
+    // will be propagated to postgres and it will be shut down as well.
+    let ecode = pg.wait().expect("failed to wait on postgres");
+
+    Ok(ecode)
+}
+
+fn main() -> Result<()> {
+    // During configuration we are starting Postgres as a child process. If we
+    // fail we do not want to leave it running. PR_SET_PDEATHSIG sets the signal
+    // that will be sent to the child process when the parent dies. NB: this is
+    // cleared for the child of a fork(). SIGINT means fast shutdown for Postgres.
+    // This does not matter much for Docker, where `zenith_ctl` is an entrypoint,
+    // so the whole container will exit if it exits. But could be useful when
+    // `zenith_ctl` is used in e.g. systemd.
+    unsafe {
+        prctl(PR_SET_PDEATHSIG, SIGINT);
+    }
+
+    // TODO: re-use `zenith_utils::logging` later
+    init_logger(DEFAULT_LOG_LEVEL)?;
+
+    let matches = clap::App::new("zenith_ctl")
+        .version("0.1.0")
+        .arg(
+            clap::Arg::with_name("connstr")
+                .short("C")
+                .long("connstr")
+                .value_name("DATABASE_URL")
+                .required(true),
+        )
+        .arg(
+            clap::Arg::with_name("pgdata")
+                .short("D")
+                .long("pgdata")
+                .value_name("DATADIR")
+                .required(true),
+        )
+        .arg(
+            clap::Arg::with_name("pgbin")
+                .short("b")
+                .long("pgbin")
+                .value_name("POSTGRES_PATH"),
+        )
+        .arg(
+            clap::Arg::with_name("spec")
+                .short("s")
+                .long("spec")
+                .value_name("SPEC_JSON"),
+        )
+        .arg(
+            clap::Arg::with_name("spec-path")
+                .short("S")
+                .long("spec-path")
+                .value_name("SPEC_PATH"),
+        )
+        .get_matches();
+
+    let pgdata = matches.value_of("pgdata").expect("PGDATA path is required");
+    let connstr = matches
+        .value_of("connstr")
+        .expect("Postgres connection string is required");
+    let spec = matches.value_of("spec");
+    let spec_path = matches.value_of("spec-path");
+
+    // Try to use just 'postgres' if no path is provided
+    let pgbin = matches.value_of("pgbin").unwrap_or("postgres");
+
+    let spec: ClusterSpec = match spec {
+        // First, try to get cluster spec from the cli argument
+        Some(json) => serde_json::from_str(json)?,
+        None => {
+            // Second, try to read it from the file if path is provided
+            if let Some(sp) = spec_path {
+                let path = Path::new(sp);
+                let file = File::open(path)?;
+                serde_json::from_reader(file)?
+            } else {
+                // Finally, try to fetch it from the env
+                // XXX: not tested well and kept as a backup option for k8s, Docker, etc.
+                // TODO: remove later
+                match env::var("CLUSTER_SPEC") {
+                    Ok(json) => serde_json::from_str(&json)?,
+                    Err(_) => panic!("cluster spec should be provided via --spec, --spec-path or env variable CLUSTER_SPEC")
+                }
+            }
+        }
+    };
+
+    let compute_state = ComputeState {
+        connstr: connstr.to_string(),
+        pgdata: pgdata.to_string(),
+        pgbin: pgbin.to_string(),
+        spec,
+        ready: false,
+        last_active: Utc::now(),
+    };
+    let compute_state = Arc::new(RwLock::new(compute_state));
+
+    // Launch service threads first, so we were able to serve availability
+    // requests, while configuration is still in progress.
+    let mut _threads = vec![
+        launch_http_server(&compute_state).expect("cannot launch compute monitor thread"),
+        launch_monitor(&compute_state).expect("cannot launch http endpoint thread"),
+    ];
+
+    prepare_pgdata(&compute_state)?;
+
+    // Run compute (Postgres) and hang waiting on it. Panic if any error happens,
+    // it will help us to trigger unwind and kill postmaster as well.
+    match run_compute(&compute_state) {
+        Ok(ec) => exit(ec.success() as i32),
+        Err(error) => panic!("cannot start compute node, error: {}", error),
+    }
+}

compute_tools/src/checker.rs

@@ -1,45 +0,0 @@
-use anyhow::{anyhow, Result};
-use tokio_postgres::NoTls;
-use tracing::{error, instrument};
-
-use crate::compute::ComputeNode;
-
-/// Update timestamp in a row in a special service table to check
-/// that we can actually write some data in this particular timeline.
-/// Create table if it's missing.
-#[instrument(skip_all)]
-pub async fn check_writability(compute: &ComputeNode) -> Result<()> {
-    // Connect to the database.
-    let (client, connection) = tokio_postgres::connect(compute.connstr.as_str(), NoTls).await?;
-    if client.is_closed() {
-        return Err(anyhow!("connection to postgres closed"));
-    }
-
-    // The connection object performs the actual communication with the database,
-    // so spawn it off to run on its own.
-    tokio::spawn(async move {
-        if let Err(e) = connection.await {
-            error!("connection error: {}", e);
-        }
-    });
-
-    let query = "
-    CREATE TABLE IF NOT EXISTS health_check (
-        id serial primary key,
-        updated_at timestamptz default now()
-    );
-    INSERT INTO health_check VALUES (1, now())
-        ON CONFLICT (id) DO UPDATE
-         SET updated_at = now();";
-
-    let result = client.simple_query(query).await?;
-
-    if result.len() != 2 {
-        return Err(anyhow::format_err!(
-            "expected 2 query results, but got {}",
-            result.len()
-        ));
-    }
-
-    Ok(())
-}

compute_tools/src/compute.rs

@@ -1,570 +0,0 @@
-use std::fs;
-use std::os::unix::fs::PermissionsExt;
-use std::path::Path;
-use std::process::{Command, Stdio};
-use std::str::FromStr;
-use std::sync::{Condvar, Mutex};
-
-use anyhow::{Context, Result};
-use chrono::{DateTime, Utc};
-use postgres::{Client, NoTls};
-use tokio_postgres;
-use tracing::{info, instrument, warn};
-use utils::id::{TenantId, TimelineId};
-use utils::lsn::Lsn;
-
-use compute_api::responses::{ComputeMetrics, ComputeStatus};
-use compute_api::spec::{ComputeMode, ComputeSpec};
-
-use crate::config;
-use crate::pg_helpers::*;
-use crate::spec::*;
-
-/// Compute node info shared across several `compute_ctl` threads.
-pub struct ComputeNode {
-    // Url type maintains proper escaping
-    pub connstr: url::Url,
-    pub pgdata: String,
-    pub pgbin: String,
-    /// We should only allow live re- / configuration of the compute node if
-    /// it uses 'pull model', i.e. it can go to control-plane and fetch
-    /// the latest configuration. Otherwise, there could be a case:
-    /// - we start compute with some spec provided as argument
-    /// - we push new spec and it does reconfiguration
-    /// - but then something happens and compute pod / VM is destroyed,
-    ///   so k8s controller starts it again with the **old** spec
-    /// and the same for empty computes:
-    /// - we started compute without any spec
-    /// - we push spec and it does configuration
-    /// - but then it is restarted without any spec again
-    pub live_config_allowed: bool,
-    /// Volatile part of the `ComputeNode`, which should be used under `Mutex`.
-    /// To allow HTTP API server to serving status requests, while configuration
-    /// is in progress, lock should be held only for short periods of time to do
-    /// read/write, not the whole configuration process.
-    pub state: Mutex<ComputeState>,
-    /// `Condvar` to allow notifying waiters about state changes.
-    pub state_changed: Condvar,
-}
-
-#[derive(Clone, Debug)]
-pub struct ComputeState {
-    pub start_time: DateTime<Utc>,
-    pub status: ComputeStatus,
-    /// Timestamp of the last Postgres activity. It could be `None` if
-    /// compute wasn't used since start.
-    pub last_active: Option<DateTime<Utc>>,
-    pub error: Option<String>,
-    pub pspec: Option<ParsedSpec>,
-    pub metrics: ComputeMetrics,
-}
-
-impl ComputeState {
-    pub fn new() -> Self {
-        Self {
-            start_time: Utc::now(),
-            status: ComputeStatus::Empty,
-            last_active: None,
-            error: None,
-            pspec: None,
-            metrics: ComputeMetrics::default(),
-        }
-    }
-}
-
-impl Default for ComputeState {
-    fn default() -> Self {
-        Self::new()
-    }
-}
-
-#[derive(Clone, Debug)]
-pub struct ParsedSpec {
-    pub spec: ComputeSpec,
-    pub tenant_id: TenantId,
-    pub timeline_id: TimelineId,
-    pub pageserver_connstr: String,
-    pub storage_auth_token: Option<String>,
-}
-
-impl TryFrom<ComputeSpec> for ParsedSpec {
-    type Error = String;
-    fn try_from(spec: ComputeSpec) -> Result<Self, String> {
-        // Extract the options from the spec file that are needed to connect to
-        // the storage system.
-        //
-        // For backwards-compatibility, the top-level fields in the spec file
-        // may be empty. In that case, we need to dig them from the GUCs in the
-        // cluster.settings field.
-        let pageserver_connstr = spec
-            .pageserver_connstring
-            .clone()
-            .or_else(|| spec.cluster.settings.find("neon.pageserver_connstring"))
-            .ok_or("pageserver connstr should be provided")?;
-        let storage_auth_token = spec.storage_auth_token.clone();
-        let tenant_id: TenantId = if let Some(tenant_id) = spec.tenant_id {
-            tenant_id
-        } else {
-            spec.cluster
-                .settings
-                .find("neon.tenant_id")
-                .ok_or("tenant id should be provided")
-                .map(|s| TenantId::from_str(&s))?
-                .or(Err("invalid tenant id"))?
-        };
-        let timeline_id: TimelineId = if let Some(timeline_id) = spec.timeline_id {
-            timeline_id
-        } else {
-            spec.cluster
-                .settings
-                .find("neon.timeline_id")
-                .ok_or("timeline id should be provided")
-                .map(|s| TimelineId::from_str(&s))?
-                .or(Err("invalid timeline id"))?
-        };
-
-        Ok(ParsedSpec {
-            spec,
-            pageserver_connstr,
-            storage_auth_token,
-            tenant_id,
-            timeline_id,
-        })
-    }
-}
-
-impl ComputeNode {
-    pub fn set_status(&self, status: ComputeStatus) {
-        let mut state = self.state.lock().unwrap();
-        state.status = status;
-        self.state_changed.notify_all();
-    }
-
-    pub fn get_status(&self) -> ComputeStatus {
-        self.state.lock().unwrap().status
-    }
-
-    // Remove `pgdata` directory and create it again with right permissions.
-    fn create_pgdata(&self) -> Result<()> {
-        // Ignore removal error, likely it is a 'No such file or directory (os error 2)'.
-        // If it is something different then create_dir() will error out anyway.
-        let _ok = fs::remove_dir_all(&self.pgdata);
-        fs::create_dir(&self.pgdata)?;
-        fs::set_permissions(&self.pgdata, fs::Permissions::from_mode(0o700))?;
-
-        Ok(())
-    }
-
-    // Get basebackup from the libpq connection to pageserver using `connstr` and
-    // unarchive it to `pgdata` directory overriding all its previous content.
-    #[instrument(skip(self, compute_state))]
-    fn get_basebackup(&self, compute_state: &ComputeState, lsn: Lsn) -> Result<()> {
-        let spec = compute_state.pspec.as_ref().expect("spec must be set");
-        let start_time = Utc::now();
-
-        let mut config = postgres::Config::from_str(&spec.pageserver_connstr)?;
-
-        // Use the storage auth token from the config file, if given.
-        // Note: this overrides any password set in the connection string.
-        if let Some(storage_auth_token) = &spec.storage_auth_token {
-            info!("Got storage auth token from spec file");
-            config.password(storage_auth_token);
-        } else {
-            info!("Storage auth token not set");
-        }
-
-        let mut client = config.connect(NoTls)?;
-        let basebackup_cmd = match lsn {
-            Lsn(0) => format!("basebackup {} {}", spec.tenant_id, spec.timeline_id), // First start of the compute
-            _ => format!("basebackup {} {} {}", spec.tenant_id, spec.timeline_id, lsn),
-        };
-        let copyreader = client.copy_out(basebackup_cmd.as_str())?;
-
-        // Read the archive directly from the `CopyOutReader`
-        //
-        // Set `ignore_zeros` so that unpack() reads all the Copy data and
-        // doesn't stop at the end-of-archive marker. Otherwise, if the server
-        // sends an Error after finishing the tarball, we will not notice it.
-        let mut ar = tar::Archive::new(copyreader);
-        ar.set_ignore_zeros(true);
-        ar.unpack(&self.pgdata)?;
-
-        self.state.lock().unwrap().metrics.basebackup_ms = Utc::now()
-            .signed_duration_since(start_time)
-            .to_std()
-            .unwrap()
-            .as_millis() as u64;
-        Ok(())
-    }
-
-    // Run `postgres` in a special mode with `--sync-safekeepers` argument
-    // and return the reported LSN back to the caller.
-    #[instrument(skip(self, storage_auth_token))]
-    fn sync_safekeepers(&self, storage_auth_token: Option<String>) -> Result<Lsn> {
-        let start_time = Utc::now();
-
-        let sync_handle = Command::new(&self.pgbin)
-            .args(["--sync-safekeepers"])
-            .env("PGDATA", &self.pgdata) // we cannot use -D in this mode
-            .envs(if let Some(storage_auth_token) = &storage_auth_token {
-                vec![("NEON_AUTH_TOKEN", storage_auth_token)]
-            } else {
-                vec![]
-            })
-            .stdout(Stdio::piped())
-            .spawn()
-            .expect("postgres --sync-safekeepers failed to start");
-
-        // `postgres --sync-safekeepers` will print all log output to stderr and
-        // final LSN to stdout. So we pipe only stdout, while stderr will be automatically
-        // redirected to the caller output.
-        let sync_output = sync_handle
-            .wait_with_output()
-            .expect("postgres --sync-safekeepers failed");
-
-        if !sync_output.status.success() {
-            anyhow::bail!(
-                "postgres --sync-safekeepers exited with non-zero status: {}. stdout: {}",
-                sync_output.status,
-                String::from_utf8(sync_output.stdout)
-                    .expect("postgres --sync-safekeepers exited, and stdout is not utf-8"),
-            );
-        }
-
-        self.state.lock().unwrap().metrics.sync_safekeepers_ms = Utc::now()
-            .signed_duration_since(start_time)
-            .to_std()
-            .unwrap()
-            .as_millis() as u64;
-
-        let lsn = Lsn::from_str(String::from_utf8(sync_output.stdout)?.trim())?;
-
-        Ok(lsn)
-    }
-
-    /// Do all the preparations like PGDATA directory creation, configuration,
-    /// safekeepers sync, basebackup, etc.
-    #[instrument(skip(self, compute_state))]
-    pub fn prepare_pgdata(&self, compute_state: &ComputeState) -> Result<()> {
-        let pspec = compute_state.pspec.as_ref().expect("spec must be set");
-        let spec = &pspec.spec;
-        let pgdata_path = Path::new(&self.pgdata);
-
-        // Remove/create an empty pgdata directory and put configuration there.
-        self.create_pgdata()?;
-        config::write_postgres_conf(&pgdata_path.join("postgresql.conf"), &pspec.spec)?;
-
-        // Syncing safekeepers is only safe with primary nodes: if a primary
-        // is already connected it will be kicked out, so a secondary (standby)
-        // cannot sync safekeepers.
-        let lsn = match spec.mode {
-            ComputeMode::Primary => {
-                info!("starting safekeepers syncing");
-                let lsn = self
-                    .sync_safekeepers(pspec.storage_auth_token.clone())
-                    .with_context(|| "failed to sync safekeepers")?;
-                info!("safekeepers synced at LSN {}", lsn);
-                lsn
-            }
-            ComputeMode::Static(lsn) => {
-                info!("Starting read-only node at static LSN {}", lsn);
-                lsn
-            }
-            ComputeMode::Replica => {
-                info!("Initializing standby from latest Pageserver LSN");
-                Lsn(0)
-            }
-        };
-
-        info!(
-            "getting basebackup@{} from pageserver {}",
-            lsn, &pspec.pageserver_connstr
-        );
-        self.get_basebackup(compute_state, lsn).with_context(|| {
-            format!(
-                "failed to get basebackup@{} from pageserver {}",
-                lsn, &pspec.pageserver_connstr
-            )
-        })?;
-
-        // Update pg_hba.conf received with basebackup.
-        update_pg_hba(pgdata_path)?;
-
-        match spec.mode {
-            ComputeMode::Primary => {}
-            ComputeMode::Replica | ComputeMode::Static(..) => {
-                add_standby_signal(pgdata_path)?;
-            }
-        }
-
-        Ok(())
-    }
-
-    /// Start Postgres as a child process and manage DBs/roles.
-    /// After that this will hang waiting on the postmaster process to exit.
-    #[instrument(skip(self))]
-    pub fn start_postgres(
-        &self,
-        storage_auth_token: Option<String>,
-    ) -> Result<std::process::Child> {
-        let pgdata_path = Path::new(&self.pgdata);
-
-        // Run postgres as a child process.
-        let mut pg = Command::new(&self.pgbin)
-            .args(["-D", &self.pgdata])
-            .envs(if let Some(storage_auth_token) = &storage_auth_token {
-                vec![("NEON_AUTH_TOKEN", storage_auth_token)]
-            } else {
-                vec![]
-            })
-            .spawn()
-            .expect("cannot start postgres process");
-
-        wait_for_postgres(&mut pg, pgdata_path)?;
-
-        Ok(pg)
-    }
-
-    /// Do initial configuration of the already started Postgres.
-    #[instrument(skip(self, compute_state))]
-    pub fn apply_config(&self, compute_state: &ComputeState) -> Result<()> {
-        // If connection fails,
-        // it may be the old node with `zenith_admin` superuser.
-        //
-        // In this case we need to connect with old `zenith_admin` name
-        // and create new user. We cannot simply rename connected user,
-        // but we can create a new one and grant it all privileges.
-        let mut client = match Client::connect(self.connstr.as_str(), NoTls) {
-            Err(e) => {
-                info!(
-                    "cannot connect to postgres: {}, retrying with `zenith_admin` username",
-                    e
-                );
-                let mut zenith_admin_connstr = self.connstr.clone();
-
-                zenith_admin_connstr
-                    .set_username("zenith_admin")
-                    .map_err(|_| anyhow::anyhow!("invalid connstr"))?;
-
-                let mut client = Client::connect(zenith_admin_connstr.as_str(), NoTls)?;
-                client.simple_query("CREATE USER cloud_admin WITH SUPERUSER")?;
-                client.simple_query("GRANT zenith_admin TO cloud_admin")?;
-                drop(client);
-
-                // reconnect with connsting with expected name
-                Client::connect(self.connstr.as_str(), NoTls)?
-            }
-            Ok(client) => client,
-        };
-
-        // Proceed with post-startup configuration. Note, that order of operations is important.
-        // Disable DDL forwarding because control plane already knows about these roles/databases.
-        client.simple_query("SET neon.forward_ddl = false")?;
-        let spec = &compute_state.pspec.as_ref().expect("spec must be set").spec;
-        handle_roles(spec, &mut client)?;
-        handle_databases(spec, &mut client)?;
-        handle_role_deletions(spec, self.connstr.as_str(), &mut client)?;
-        handle_grants(spec, self.connstr.as_str(), &mut client)?;
-        handle_extensions(spec, &mut client)?;
-
-        // 'Close' connection
-        drop(client);
-
-        Ok(())
-    }
-
-    // We could've wrapped this around `pg_ctl reload`, but right now we don't use
-    // `pg_ctl` for start / stop, so this just seems much easier to do as we already
-    // have opened connection to Postgres and superuser access.
-    #[instrument(skip(self, client))]
-    fn pg_reload_conf(&self, client: &mut Client) -> Result<()> {
-        client.simple_query("SELECT pg_reload_conf()")?;
-        Ok(())
-    }
-
-    /// Similar to `apply_config()`, but does a bit different sequence of operations,
-    /// as it's used to reconfigure a previously started and configured Postgres node.
-    #[instrument(skip(self))]
-    pub fn reconfigure(&self) -> Result<()> {
-        let spec = self.state.lock().unwrap().pspec.clone().unwrap().spec;
-
-        // Write new config
-        let pgdata_path = Path::new(&self.pgdata);
-        config::write_postgres_conf(&pgdata_path.join("postgresql.conf"), &spec)?;
-
-        let mut client = Client::connect(self.connstr.as_str(), NoTls)?;
-        self.pg_reload_conf(&mut client)?;
-
-        // Proceed with post-startup configuration. Note, that order of operations is important.
-        // Disable DDL forwarding because control plane already knows about these roles/databases.
-        if spec.mode == ComputeMode::Primary {
-            client.simple_query("SET neon.forward_ddl = false")?;
-            handle_roles(&spec, &mut client)?;
-            handle_databases(&spec, &mut client)?;
-            handle_role_deletions(&spec, self.connstr.as_str(), &mut client)?;
-            handle_grants(&spec, self.connstr.as_str(), &mut client)?;
-            handle_extensions(&spec, &mut client)?;
-        }
-
-        // 'Close' connection
-        drop(client);
-
-        let unknown_op = "unknown".to_string();
-        let op_id = spec.operation_uuid.as_ref().unwrap_or(&unknown_op);
-        info!(
-            "finished reconfiguration of compute node for operation {}",
-            op_id
-        );
-
-        Ok(())
-    }
-
-    #[instrument(skip(self))]
-    pub fn start_compute(&self) -> Result<std::process::Child> {
-        let compute_state = self.state.lock().unwrap().clone();
-        let pspec = compute_state.pspec.as_ref().expect("spec must be set");
-        info!(
-            "starting compute for project {}, operation {}, tenant {}, timeline {}",
-            pspec.spec.cluster.cluster_id.as_deref().unwrap_or("None"),
-            pspec.spec.operation_uuid.as_deref().unwrap_or("None"),
-            pspec.tenant_id,
-            pspec.timeline_id,
-        );
-
-        self.prepare_pgdata(&compute_state)?;
-
-        let start_time = Utc::now();
-
-        let pg = self.start_postgres(pspec.storage_auth_token.clone())?;
-
-        if pspec.spec.mode == ComputeMode::Primary && !pspec.spec.skip_pg_catalog_updates {
-            self.apply_config(&compute_state)?;
-        }
-
-        let startup_end_time = Utc::now();
-        {
-            let mut state = self.state.lock().unwrap();
-            state.metrics.config_ms = startup_end_time
-                .signed_duration_since(start_time)
-                .to_std()
-                .unwrap()
-                .as_millis() as u64;
-            state.metrics.total_startup_ms = startup_end_time
-                .signed_duration_since(compute_state.start_time)
-                .to_std()
-                .unwrap()
-                .as_millis() as u64;
-        }
-        self.set_status(ComputeStatus::Running);
-
-        info!(
-            "finished configuration of compute for project {}",
-            pspec.spec.cluster.cluster_id.as_deref().unwrap_or("None")
-        );
-
-        Ok(pg)
-    }
-
-    // Look for core dumps and collect backtraces.
-    //
-    // EKS worker nodes have following core dump settings:
-    //   /proc/sys/kernel/core_pattern -> core
-    //   /proc/sys/kernel/core_uses_pid -> 1
-    //   ulimint -c -> unlimited
-    // which results in core dumps being written to postgres data directory as core.<pid>.
-    //
-    // Use that as a default location and pattern, except macos where core dumps are written
-    // to /cores/ directory by default.
-    pub fn check_for_core_dumps(&self) -> Result<()> {
-        let core_dump_dir = match std::env::consts::OS {
-            "macos" => Path::new("/cores/"),
-            _ => Path::new(&self.pgdata),
-        };
-
-        // Collect core dump paths if any
-        info!("checking for core dumps in {}", core_dump_dir.display());
-        let files = fs::read_dir(core_dump_dir)?;
-        let cores = files.filter_map(|entry| {
-            let entry = entry.ok()?;
-            let _ = entry.file_name().to_str()?.strip_prefix("core.")?;
-            Some(entry.path())
-        });
-
-        // Print backtrace for each core dump
-        for core_path in cores {
-            warn!(
-                "core dump found: {}, collecting backtrace",
-                core_path.display()
-            );
-
-            // Try first with gdb
-            let backtrace = Command::new("gdb")
-                .args(["--batch", "-q", "-ex", "bt", &self.pgbin])
-                .arg(&core_path)
-                .output();
-
-            // Try lldb if no gdb is found -- that is handy for local testing on macOS
-            let backtrace = match backtrace {
-                Err(ref e) if e.kind() == std::io::ErrorKind::NotFound => {
-                    warn!("cannot find gdb, trying lldb");
-                    Command::new("lldb")
-                        .arg("-c")
-                        .arg(&core_path)
-                        .args(["--batch", "-o", "bt all", "-o", "quit"])
-                        .output()
-                }
-                _ => backtrace,
-            }?;
-
-            warn!(
-                "core dump backtrace: {}",
-                String::from_utf8_lossy(&backtrace.stdout)
-            );
-            warn!(
-                "debugger stderr: {}",
-                String::from_utf8_lossy(&backtrace.stderr)
-            );
-        }
-
-        Ok(())
-    }
-
-    /// Select `pg_stat_statements` data and return it as a stringified JSON
-    pub async fn collect_insights(&self) -> String {
-        let mut result_rows: Vec<String> = Vec::new();
-        let connect_result = tokio_postgres::connect(self.connstr.as_str(), NoTls).await;
-        let (client, connection) = connect_result.unwrap();
-        tokio::spawn(async move {
-            if let Err(e) = connection.await {
-                eprintln!("connection error: {}", e);
-            }
-        });
-        let result = client
-            .simple_query(
-                "SELECT
-    row_to_json(pg_stat_statements)
-FROM
-    pg_stat_statements
-WHERE
-    userid != 'cloud_admin'::regrole::oid
-ORDER BY
-    (mean_exec_time + mean_plan_time) DESC
-LIMIT 100",
-            )
-            .await;
-
-        if let Ok(raw_rows) = result {
-            for message in raw_rows.iter() {
-                if let postgres::SimpleQueryMessage::Row(row) = message {
-                    if let Some(json) = row.get(0) {
-                        result_rows.push(json.to_string());
-                    }
-                }
-            }
-
-            format!("{{\"pg_stat_statements\": [{}]}}", result_rows.join(","))
-        } else {
-            "{{\"pg_stat_statements\": []}}".to_string()
-        }
-    }
-}

compute_tools/src/config.rs

@@ -5,9 +5,8 @@ use std::path::Path;
 
 use anyhow::Result;
 
-use crate::pg_helpers::escape_conf_value;
 use crate::pg_helpers::PgOptionsSerialize;
-use compute_api::spec::{ComputeMode, ComputeSpec};
+use crate::zenith::ClusterSpec;
 
 /// Check that `line` is inside a text file and put it there if it is not.
 /// Create file if it doesn't exist.
@@ -33,67 +32,20 @@ pub fn line_in_file(path: &Path, line: &str) -> Result<bool> {
 }
 
 /// Create or completely rewrite configuration file specified by `path`
-pub fn write_postgres_conf(path: &Path, spec: &ComputeSpec) -> Result<()> {
+pub fn write_postgres_conf(path: &Path, spec: &ClusterSpec) -> Result<()> {
     // File::create() destroys the file content if it exists.
-    let mut file = File::create(path)?;
+    let mut postgres_conf = File::create(path)?;
 
-    // Write the postgresql.conf content from the spec file as is.
-    if let Some(conf) = &spec.cluster.postgresql_conf {
-        writeln!(file, "{}", conf)?;
-    }
-
-    write!(file, "{}", &spec.cluster.settings.as_pg_settings())?;
-
-    // Add options for connecting to storage
-    writeln!(file, "# Neon storage settings")?;
-    if let Some(s) = &spec.pageserver_connstring {
-        writeln!(
-            file,
-            "neon.pageserver_connstring='{}'",
-            escape_conf_value(s)
-        )?;
-    }
-    if !spec.safekeeper_connstrings.is_empty() {
-        writeln!(
-            file,
-            "neon.safekeepers='{}'",
-            escape_conf_value(&spec.safekeeper_connstrings.join(","))
-        )?;
-    }
-    if let Some(s) = &spec.tenant_id {
-        writeln!(
-            file,
-            "neon.tenant_id='{}'",
-            escape_conf_value(&s.to_string())
-        )?;
-    }
-    if let Some(s) = &spec.timeline_id {
-        writeln!(
-            file,
-            "neon.timeline_id='{}'",
-            escape_conf_value(&s.to_string())
-        )?;
-    }
-
-    match spec.mode {
-        ComputeMode::Primary => {}
-        ComputeMode::Static(lsn) => {
-            // hot_standby is 'on' by default, but let's be explicit
-            writeln!(file, "hot_standby=on")?;
-            writeln!(file, "recovery_target_lsn='{lsn}'")?;
-        }
-        ComputeMode::Replica => {
-            // hot_standby is 'on' by default, but let's be explicit
-            writeln!(file, "hot_standby=on")?;
-        }
-    }
-
-    // If there are any extra options in the 'settings' field, append those
-    if spec.cluster.settings.is_some() {
-        writeln!(file, "# Managed by compute_ctl: begin")?;
-        write!(file, "{}", spec.cluster.settings.as_pg_settings())?;
-        writeln!(file, "# Managed by compute_ctl: end")?;
-    }
+    write_zenith_managed_block(&mut postgres_conf, &spec.cluster.settings.as_pg_settings())?;
+
+    Ok(())
+}
+
+// Write Postgres config block wrapped with generated comment section
+fn write_zenith_managed_block(file: &mut File, buf: &str) -> Result<()> {
+    writeln!(file, "# Managed by Zenith: begin")?;
+    writeln!(file, "{}", buf)?;
+    writeln!(file, "# Managed by Zenith: end")?;
 
     Ok(())
 }

compute_tools/src/configurator.rs

@@ -1,54 +0,0 @@
-use std::sync::Arc;
-use std::thread;
-
-use anyhow::Result;
-use tracing::{error, info, instrument};
-
-use compute_api::responses::ComputeStatus;
-
-use crate::compute::ComputeNode;
-
-#[instrument(skip(compute))]
-fn configurator_main_loop(compute: &Arc<ComputeNode>) {
-    info!("waiting for reconfiguration requests");
-    loop {
-        let state = compute.state.lock().unwrap();
-        let mut state = compute.state_changed.wait(state).unwrap();
-
-        if state.status == ComputeStatus::ConfigurationPending {
-            info!("got configuration request");
-            state.status = ComputeStatus::Configuration;
-            compute.state_changed.notify_all();
-            drop(state);
-
-            let mut new_status = ComputeStatus::Failed;
-            if let Err(e) = compute.reconfigure() {
-                error!("could not configure compute node: {}", e);
-            } else {
-                new_status = ComputeStatus::Running;
-                info!("compute node configured");
-            }
-
-            // XXX: used to test that API is blocking
-            // std::thread::sleep(std::time::Duration::from_millis(10000));
-
-            compute.set_status(new_status);
-        } else if state.status == ComputeStatus::Failed {
-            info!("compute node is now in Failed state, exiting");
-            break;
-        } else {
-            info!("woken up for compute status: {:?}, sleeping", state.status);
-        }
-    }
-}
-
-pub fn launch_configurator(compute: &Arc<ComputeNode>) -> Result<thread::JoinHandle<()>> {
-    let compute = Arc::clone(compute);
-
-    Ok(thread::Builder::new()
-        .name("compute-configurator".into())
-        .spawn(move || {
-            configurator_main_loop(&compute);
-            info!("configurator thread is exited");
-        })?)
-}

compute_tools/src/http/api.rs

@@ -1,265 +0,0 @@
-use std::convert::Infallible;
-use std::net::SocketAddr;
-use std::sync::Arc;
-use std::thread;
-
-use crate::compute::{ComputeNode, ComputeState, ParsedSpec};
-use compute_api::requests::ConfigurationRequest;
-use compute_api::responses::{ComputeStatus, ComputeStatusResponse, GenericAPIError};
-
-use anyhow::Result;
-use hyper::service::{make_service_fn, service_fn};
-use hyper::{Body, Method, Request, Response, Server, StatusCode};
-use num_cpus;
-use serde_json;
-use tokio::task;
-use tracing::{error, info};
-use tracing_utils::http::OtelName;
-
-fn status_response_from_state(state: &ComputeState) -> ComputeStatusResponse {
-    ComputeStatusResponse {
-        start_time: state.start_time,
-        tenant: state
-            .pspec
-            .as_ref()
-            .map(|pspec| pspec.tenant_id.to_string()),
-        timeline: state
-            .pspec
-            .as_ref()
-            .map(|pspec| pspec.timeline_id.to_string()),
-        status: state.status,
-        last_active: state.last_active,
-        error: state.error.clone(),
-    }
-}
-
-// Service function to handle all available routes.
-async fn routes(req: Request<Body>, compute: &Arc<ComputeNode>) -> Response<Body> {
-    //
-    // NOTE: The URI path is currently included in traces. That's OK because
-    // it doesn't contain any variable parts or sensitive information. But
-    // please keep that in mind if you change the routing here.
-    //
-    match (req.method(), req.uri().path()) {
-        // Serialized compute state.
-        (&Method::GET, "/status") => {
-            info!("serving /status GET request");
-            let state = compute.state.lock().unwrap();
-            let status_response = status_response_from_state(&state);
-            Response::new(Body::from(serde_json::to_string(&status_response).unwrap()))
-        }
-
-        // Startup metrics in JSON format. Keep /metrics reserved for a possible
-        // future use for Prometheus metrics format.
-        (&Method::GET, "/metrics.json") => {
-            info!("serving /metrics.json GET request");
-            let metrics = compute.state.lock().unwrap().metrics.clone();
-            Response::new(Body::from(serde_json::to_string(&metrics).unwrap()))
-        }
-
-        // Collect Postgres current usage insights
-        (&Method::GET, "/insights") => {
-            info!("serving /insights GET request");
-            let status = compute.get_status();
-            if status != ComputeStatus::Running {
-                let msg = format!("compute is not running, current status: {:?}", status);
-                error!(msg);
-                return Response::new(Body::from(msg));
-            }
-
-            let insights = compute.collect_insights().await;
-            Response::new(Body::from(insights))
-        }
-
-        (&Method::POST, "/check_writability") => {
-            info!("serving /check_writability POST request");
-            let status = compute.get_status();
-            if status != ComputeStatus::Running {
-                let msg = format!(
-                    "invalid compute status for check_writability request: {:?}",
-                    status
-                );
-                error!(msg);
-                return Response::new(Body::from(msg));
-            }
-
-            let res = crate::checker::check_writability(compute).await;
-            match res {
-                Ok(_) => Response::new(Body::from("true")),
-                Err(e) => {
-                    error!("check_writability failed: {}", e);
-                    Response::new(Body::from(e.to_string()))
-                }
-            }
-        }
-
-        (&Method::GET, "/info") => {
-            let num_cpus = num_cpus::get_physical();
-            info!("serving /info GET request. num_cpus: {}", num_cpus);
-            Response::new(Body::from(
-                serde_json::json!({
-                    "num_cpus": num_cpus,
-                })
-                .to_string(),
-            ))
-        }
-
-        // Accept spec in JSON format and request compute configuration. If
-        // anything goes wrong after we set the compute status to `ConfigurationPending`
-        // and update compute state with new spec, we basically leave compute
-        // in the potentially wrong state. That said, it's control-plane's
-        // responsibility to watch compute state after reconfiguration request
-        // and to clean restart in case of errors.
-        (&Method::POST, "/configure") => {
-            info!("serving /configure POST request");
-            match handle_configure_request(req, compute).await {
-                Ok(msg) => Response::new(Body::from(msg)),
-                Err((msg, code)) => {
-                    error!("error handling /configure request: {msg}");
-                    render_json_error(&msg, code)
-                }
-            }
-        }
-
-        // Return the `404 Not Found` for any other routes.
-        _ => {
-            let mut not_found = Response::new(Body::from("404 Not Found"));
-            *not_found.status_mut() = StatusCode::NOT_FOUND;
-            not_found
-        }
-    }
-}
-
-async fn handle_configure_request(
-    req: Request<Body>,
-    compute: &Arc<ComputeNode>,
-) -> Result<String, (String, StatusCode)> {
-    if !compute.live_config_allowed {
-        return Err((
-            "live configuration is not allowed for this compute node".to_string(),
-            StatusCode::PRECONDITION_FAILED,
-        ));
-    }
-
-    let body_bytes = hyper::body::to_bytes(req.into_body()).await.unwrap();
-    let spec_raw = String::from_utf8(body_bytes.to_vec()).unwrap();
-    if let Ok(request) = serde_json::from_str::<ConfigurationRequest>(&spec_raw) {
-        let spec = request.spec;
-
-        let parsed_spec = match ParsedSpec::try_from(spec) {
-            Ok(ps) => ps,
-            Err(msg) => return Err((msg, StatusCode::PRECONDITION_FAILED)),
-        };
-
-        // XXX: wrap state update under lock in code blocks. Otherwise,
-        // we will try to `Send` `mut state` into the spawned thread
-        // bellow, which will cause error:
-        // ```
-        // error: future cannot be sent between threads safely
-        // ```
-        {
-            let mut state = compute.state.lock().unwrap();
-            if state.status != ComputeStatus::Empty && state.status != ComputeStatus::Running {
-                let msg = format!(
-                    "invalid compute status for configuration request: {:?}",
-                    state.status.clone()
-                );
-                return Err((msg, StatusCode::PRECONDITION_FAILED));
-            }
-            state.pspec = Some(parsed_spec);
-            state.status = ComputeStatus::ConfigurationPending;
-            compute.state_changed.notify_all();
-            drop(state);
-            info!("set new spec and notified waiters");
-        }
-
-        // Spawn a blocking thread to wait for compute to become Running.
-        // This is needed to do not block the main pool of workers and
-        // be able to serve other requests while some particular request
-        // is waiting for compute to finish configuration.
-        let c = compute.clone();
-        task::spawn_blocking(move || {
-            let mut state = c.state.lock().unwrap();
-            while state.status != ComputeStatus::Running {
-                state = c.state_changed.wait(state).unwrap();
-                info!(
-                    "waiting for compute to become Running, current status: {:?}",
-                    state.status
-                );
-
-                if state.status == ComputeStatus::Failed {
-                    let err = state.error.as_ref().map_or("unknown error", |x| x);
-                    let msg = format!("compute configuration failed: {:?}", err);
-                    return Err((msg, StatusCode::INTERNAL_SERVER_ERROR));
-                }
-            }
-
-            Ok(())
-        })
-        .await
-        .unwrap()?;
-
-        // Return current compute state if everything went well.
-        let state = compute.state.lock().unwrap().clone();
-        let status_response = status_response_from_state(&state);
-        Ok(serde_json::to_string(&status_response).unwrap())
-    } else {
-        Err(("invalid spec".to_string(), StatusCode::BAD_REQUEST))
-    }
-}
-
-fn render_json_error(e: &str, status: StatusCode) -> Response<Body> {
-    let error = GenericAPIError {
-        error: e.to_string(),
-    };
-    Response::builder()
-        .status(status)
-        .body(Body::from(serde_json::to_string(&error).unwrap()))
-        .unwrap()
-}
-
-// Main Hyper HTTP server function that runs it and blocks waiting on it forever.
-#[tokio::main]
-async fn serve(port: u16, state: Arc<ComputeNode>) {
-    let addr = SocketAddr::from(([0, 0, 0, 0], port));
-
-    let make_service = make_service_fn(move |_conn| {
-        let state = state.clone();
-        async move {
-            Ok::<_, Infallible>(service_fn(move |req: Request<Body>| {
-                let state = state.clone();
-                async move {
-                    Ok::<_, Infallible>(
-                        // NOTE: We include the URI path in the string. It
-                        // doesn't contain any variable parts or sensitive
-                        // information in this API.
-                        tracing_utils::http::tracing_handler(
-                            req,
-                            |req| routes(req, &state),
-                            OtelName::UriPath,
-                        )
-                        .await,
-                    )
-                }
-            }))
-        }
-    });
-
-    info!("starting HTTP server on {}", addr);
-
-    let server = Server::bind(&addr).serve(make_service);
-
-    // Run this server forever
-    if let Err(e) = server.await {
-        error!("server error: {}", e);
-    }
-}
-
-/// Launch a separate Hyper HTTP API server thread and return its `JoinHandle`.
-pub fn launch_http_server(port: u16, state: &Arc<ComputeNode>) -> Result<thread::JoinHandle<()>> {
-    let state = Arc::clone(state);
-
-    Ok(thread::Builder::new()
-        .name("http-endpoint".into())
-        .spawn(move || serve(port, state))?)
-}

compute_tools/src/http/mod.rs

@@ -1 +0,0 @@
-pub mod api;

compute_tools/src/http/openapi_spec.yaml

@@ -1,248 +0,0 @@
-openapi: "3.0.2"
-info:
-  title: Compute node control API
-  version: "1.0"
-
-servers:
-  - url: "http://localhost:3080"
-
-paths:
-  /status:
-    get:
-      tags:
-      - Info
-      summary: Get compute node internal status.
-      description: ""
-      operationId: getComputeStatus
-      responses:
-        200:
-          description: ComputeState
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ComputeState"
-
-  /metrics.json:
-    get:
-      tags:
-      - Info
-      summary: Get compute node startup metrics in JSON format.
-      description: ""
-      operationId: getComputeMetricsJSON
-      responses:
-        200:
-          description: ComputeMetrics
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ComputeMetrics"
-
-  /insights:
-    get:
-      tags:
-      - Info
-      summary: Get current compute insights in JSON format.
-      description: |
-        Note, that this doesn't include any historical data.
-      operationId: getComputeInsights
-      responses:
-        200:
-          description: Compute insights
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ComputeInsights"
-
-  /info:
-    get:
-      tags:
-      - Info
-      summary: Get info about the compute pod / VM.
-      description: ""
-      operationId: getInfo
-      responses:
-        200:
-          description: Info
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Info"
-
-  /check_writability:
-    post:
-      tags:
-      - Check
-      summary: Check that we can write new data on this compute.
-      description: ""
-      operationId: checkComputeWritability
-      responses:
-        200:
-          description: Check result
-          content:
-            text/plain:
-              schema:
-                type: string
-                description: Error text or 'true' if check passed.
-                example: "true"
-
-  /configure:
-    post:
-      tags:
-      - Configure
-      summary: Perform compute node configuration.
-      description: |
-        This is a blocking API endpoint, i.e. it blocks waiting until
-        compute is finished configuration and is in `Running` state.
-        Optional non-blocking mode could be added later.
-      operationId: configureCompute
-      requestBody:
-        description: Configuration request.
-        required: true
-        content:
-          application/json:
-            schema:
-              type: object
-              required:
-                - spec
-              properties:
-                spec:
-                  # XXX: I don't want to explain current spec in the OpenAPI format,
-                  # as it could be changed really soon. Consider doing it later.
-                  type: object
-      responses:
-        200:
-          description: Compute configuration finished.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ComputeState"
-        400:
-          description: Provided spec is invalid.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-        412:
-          description: |
-            It's not possible to do live-configuration of the compute.
-            It's either in the wrong state, or compute doesn't use pull
-            mode of configuration.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-        500:
-          description: |
-            Compute configuration request was processed, but error
-            occurred. Compute will likely shutdown soon.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-
-components:
-  securitySchemes:
-    JWT:
-      type: http
-      scheme: bearer
-      bearerFormat: JWT
-
-  schemas:
-    ComputeMetrics:
-      type: object
-      description: Compute startup metrics.
-      required:
-        - wait_for_spec_ms
-        - sync_safekeepers_ms
-        - basebackup_ms
-        - config_ms
-        - total_startup_ms
-      properties:
-        wait_for_spec_ms:
-          type: integer
-        sync_safekeepers_ms:
-          type: integer
-        basebackup_ms:
-          type: integer
-        config_ms:
-          type: integer
-        total_startup_ms:
-          type: integer
-
-    Info:
-      type: object
-      description: Information about VM/Pod.
-      required:
-        - num_cpus
-      properties:
-        num_cpus:
-          type: integer
-
-    ComputeState:
-      type: object
-      required:
-        - start_time
-        - status
-      properties:
-        start_time:
-          type: string
-          description: |
-            Time when compute was started. If initially compute was started in the `empty`
-            state and then provided with valid spec, `start_time` will be reset to the
-            moment, when spec was received.
-          example: "2022-10-12T07:20:50.52Z"
-        status:
-          $ref: '#/components/schemas/ComputeStatus'
-        last_active:
-          type: string
-          description: |
-            The last detected compute activity timestamp in UTC and RFC3339 format.
-            It could be empty if compute was never used by user since start.
-          example: "2022-10-12T07:20:50.52Z"
-        error:
-          type: string
-          description: Text of the error during compute startup or reconfiguration, if any.
-          example: ""
-        tenant:
-          type: string
-          description: Identifier of the current tenant served by compute node, if any.
-          example: c9269c359e9a199fad1ea0981246a78f
-        timeline:
-          type: string
-          description: Identifier of the current timeline served by compute node, if any.
-          example: ece7de74d4b8cbe5433a68ce4d1b97b4
-
-    ComputeInsights:
-      type: object
-      properties:
-        pg_stat_statements:
-          description: Contains raw output from pg_stat_statements in JSON format.
-          type: array
-          items:
-            type: object
-
-    ComputeStatus:
-      type: string
-      enum:
-        - empty
-        - init
-        - failed
-        - running
-        - configuration_pending
-        - configuration
-      example: running
-
-    #
-    # Errors
-    #
-
-    GenericError:
-      type: object
-      required:
-        - error
-      properties:
-        error:
-          type: string
-
-security:
-  - JWT: []

compute_tools/src/http_api.rs

@@ -0,0 +1,73 @@
+use std::convert::Infallible;
+use std::net::SocketAddr;
+use std::sync::{Arc, RwLock};
+use std::thread;
+
+use anyhow::Result;
+use hyper::service::{make_service_fn, service_fn};
+use hyper::{Body, Method, Request, Response, Server, StatusCode};
+use log::{error, info};
+
+use crate::zenith::*;
+
+// Service function to handle all available routes.
+fn routes(req: Request<Body>, state: Arc<RwLock<ComputeState>>) -> Response<Body> {
+    match (req.method(), req.uri().path()) {
+        // Timestamp of the last Postgres activity in the plain text.
+        (&Method::GET, "/last_activity") => {
+            info!("serving /last_active GET request");
+            let state = state.read().unwrap();
+
+            // Use RFC3339 format for consistency.
+            Response::new(Body::from(state.last_active.to_rfc3339()))
+        }
+
+        // Has compute setup process finished? -> true/false
+        (&Method::GET, "/ready") => {
+            info!("serving /ready GET request");
+            let state = state.read().unwrap();
+            Response::new(Body::from(format!("{}", state.ready)))
+        }
+
+        // Return the `404 Not Found` for any other routes.
+        _ => {
+            let mut not_found = Response::new(Body::from("404 Not Found"));
+            *not_found.status_mut() = StatusCode::NOT_FOUND;
+            not_found
+        }
+    }
+}
+
+// Main Hyper HTTP server function that runs it and blocks waiting on it forever.
+#[tokio::main]
+async fn serve(state: Arc<RwLock<ComputeState>>) {
+    let addr = SocketAddr::from(([0, 0, 0, 0], 3080));
+
+    let make_service = make_service_fn(move |_conn| {
+        let state = state.clone();
+        async move {
+            Ok::<_, Infallible>(service_fn(move |req: Request<Body>| {
+                let state = state.clone();
+                async move { Ok::<_, Infallible>(routes(req, state)) }
+            }))
+        }
+    });
+
+    info!("starting HTTP server on {}", addr);
+
+    let server = Server::bind(&addr).serve(make_service);
+
+    // Run this server forever
+    if let Err(e) = server.await {
+        error!("server error: {}", e);
+    }
+}
+
+/// Launch a separate Hyper HTTP API server thread and return its `JoinHandle`.
+pub fn launch_http_server(state: &Arc<RwLock<ComputeState>>) -> Result<thread::JoinHandle<()>> {
+    let state = Arc::clone(state);
+
+    Ok(thread::Builder::new()
+        .name("http-endpoint".into())
+        .spawn(move || serve(state))?)
+}

compute_tools/src/lib.rs

@@ -2,14 +2,12 @@
 //! Various tools and helpers to handle cluster / compute node (Postgres)
 //! configuration.
 //!
-pub mod checker;
 pub mod config;
-pub mod configurator;
-pub mod http;
+pub mod http_api;
 #[macro_use]
 pub mod logger;
-pub mod compute;
 pub mod monitor;
 pub mod params;
 pub mod pg_helpers;
 pub mod spec;
+pub mod zenith;

compute_tools/src/logger.rs

@@ -1,39 +1,43 @@
-use tracing_opentelemetry::OpenTelemetryLayer;
-use tracing_subscriber::layer::SubscriberExt;
-use tracing_subscriber::prelude::*;
+use std::io::Write;
 
-/// Initialize logging to stderr, and OpenTelemetry tracing and exporter.
-///
-/// Logging is configured using either `default_log_level` or
+use anyhow::Result;
+use chrono::Utc;
+use env_logger::{Builder, Env};
+
+macro_rules! info_println {
+    ($($tts:tt)*) => {
+        if log_enabled!(Level::Info) {
+            println!($($tts)*);
+        }
+    }
+}
+
+macro_rules! info_print {
+    ($($tts:tt)*) => {
+        if log_enabled!(Level::Info) {
+            print!($($tts)*);
+        }
+    }
+}
+
+/// Initialize `env_logger` using either `default_level` or
 /// `RUST_LOG` environment variable as default log level.
-///
-/// OpenTelemetry is configured with OTLP/HTTP exporter. It picks up
-/// configuration from environment variables. For example, to change the destination,
-/// set `OTEL_EXPORTER_OTLP_ENDPOINT=http://jaeger:4318`. See
-/// `tracing-utils` package description.
-///
-pub fn init_tracing_and_logging(default_log_level: &str) -> anyhow::Result<()> {
-    // Initialize Logging
-    let env_filter = tracing_subscriber::EnvFilter::try_from_default_env()
-        .unwrap_or_else(|_| tracing_subscriber::EnvFilter::new(default_log_level));
+pub fn init_logger(default_level: &str) -> Result<()> {
+    let env = Env::default().filter_or("RUST_LOG", default_level);
 
-    let fmt_layer = tracing_subscriber::fmt::layer()
-        .with_target(false)
-        .with_writer(std::io::stderr);
-
-    // Initialize OpenTelemetry
-    let otlp_layer =
-        tracing_utils::init_tracing_without_runtime("compute_ctl").map(OpenTelemetryLayer::new);
-
-    // Put it all together
-    tracing_subscriber::registry()
-        .with(env_filter)
-        .with(otlp_layer)
-        .with(fmt_layer)
+    Builder::from_env(env)
+        .format(|buf, record| {
+            let thread_handle = std::thread::current();
+            writeln!(
+                buf,
+                "{} [{}] {}: {}",
+                Utc::now().format("%Y-%m-%d %H:%M:%S%.3f %Z"),
+                thread_handle.name().unwrap_or("main"),
+                record.level(),
+                record.args()
+            )
+        })
         .init();
-    tracing::info!("logging and tracing started");
-
-    utils::logging::replace_panic_hook_with_tracing_panic_hook().forget();
 
     Ok(())
 }

compute_tools/src/monitor.rs

@@ -1,23 +1,23 @@
-use std::sync::Arc;
+use std::sync::{Arc, RwLock};
 use std::{thread, time};
 
 use anyhow::Result;
 use chrono::{DateTime, Utc};
+use log::{debug, info};
 use postgres::{Client, NoTls};
-use tracing::{debug, info};
 
-use crate::compute::ComputeNode;
+use crate::zenith::ComputeState;
 
 const MONITOR_CHECK_INTERVAL: u64 = 500; // milliseconds
 
 // Spin in a loop and figure out the last activity time in the Postgres.
 // Then update it in the shared state. This function never errors out.
 // XXX: the only expected panic is at `RwLock` unwrap().
-fn watch_compute_activity(compute: &ComputeNode) {
+fn watch_compute_activity(state: &Arc<RwLock<ComputeState>>) {
     // Suppose that `connstr` doesn't change
-    let connstr = compute.connstr.as_str();
+    let connstr = state.read().unwrap().connstr.clone();
     // Define `client` outside of the loop to reuse existing connection if it's active.
-    let mut client = Client::connect(connstr, NoTls);
+    let mut client = Client::connect(&connstr, NoTls);
     let timeout = time::Duration::from_millis(MONITOR_CHECK_INTERVAL);
 
     info!("watching Postgres activity at {}", connstr);
@@ -32,7 +32,7 @@ fn watch_compute_activity(compute: &ComputeNode) {
                     info!("connection to postgres closed, trying to reconnect");
 
                     // Connection is closed, reconnect and try again.
-                    client = Client::connect(connstr, NoTls);
+                    client = Client::connect(&connstr, NoTls);
                     continue;
                 }
 
@@ -43,25 +43,19 @@ fn watch_compute_activity(compute: &ComputeNode) {
                          FROM pg_stat_activity
                          WHERE backend_type = 'client backend'
                             AND pid != pg_backend_pid()
-                            AND usename != 'cloud_admin';", // XXX: find a better way to filter other monitors?
+                            AND usename != 'zenith_admin';", // XXX: find a better way to filter other monitors?
                         &[],
                     );
-                let mut last_active = compute.state.lock().unwrap().last_active;
+                let mut last_active = state.read().unwrap().last_active;
 
                 if let Ok(backs) = backends {
                     let mut idle_backs: Vec<DateTime<Utc>> = vec![];
 
                     for b in backs.into_iter() {
-                        let state: String = match b.try_get("state") {
-                            Ok(state) => state,
-                            Err(_) => continue,
-                        };
+                        let state: String = b.get("state");
+                        let change: String = b.get("state_change");
 
                         if state == "idle" {
-                            let change: String = match b.try_get("state_change") {
-                                Ok(state_change) => state_change,
-                                Err(_) => continue,
-                            };
                             let change = DateTime::parse_from_rfc3339(&change);
                             match change {
                                 Ok(t) => idle_backs.push(t.with_timezone(&Utc)),
@@ -74,38 +68,39 @@ fn watch_compute_activity(compute: &ComputeNode) {
                             // Found non-idle backend, so the last activity is NOW.
                             // Save it and exit the for loop. Also clear the idle backend
                             // `state_change` timestamps array as it doesn't matter now.
-                            last_active = Some(Utc::now());
+                            last_active = Utc::now();
                             idle_backs.clear();
                             break;
                         }
                     }
 
-                    // Get idle backend `state_change` with the max timestamp.
-                    if let Some(last) = idle_backs.iter().max() {
-                        last_active = Some(*last);
+                    // Sort idle backend `state_change` timestamps. The last one corresponds
+                    // to the last activity.
+                    idle_backs.sort();
+                    if let Some(last) = idle_backs.last() {
+                        last_active = *last;
                     }
                 }
 
                 // Update the last activity in the shared state if we got a more recent one.
-                let mut state = compute.state.lock().unwrap();
-                // NB: `Some(<DateTime>)` is always greater than `None`.
+                let mut state = state.write().unwrap();
                 if last_active > state.last_active {
                     state.last_active = last_active;
-                    debug!("set the last compute activity time to: {:?}", last_active);
+                    debug!("set the last compute activity time to: {}", last_active);
                 }
             }
             Err(e) => {
-                debug!("cannot connect to postgres: {}, retrying", e);
+                info!("cannot connect to postgres: {}, retrying", e);
 
                 // Establish a new connection and try again.
-                client = Client::connect(connstr, NoTls);
+                client = Client::connect(&connstr, NoTls);
             }
         }
     }
 }
 
 /// Launch a separate compute monitor thread and return its `JoinHandle`.
-pub fn launch_monitor(state: &Arc<ComputeNode>) -> Result<thread::JoinHandle<()>> {
+pub fn launch_monitor(state: &Arc<RwLock<ComputeState>>) -> Result<thread::JoinHandle<()>> {
     let state = Arc::clone(state);
 
     Ok(thread::Builder::new()

compute_tools/src/params.rs

@@ -1,9 +1,3 @@
 pub const DEFAULT_LOG_LEVEL: &str = "info";
-// From Postgres docs:
-//   To ease transition from the md5 method to the newer SCRAM method, if md5 is specified
-//   as a method in pg_hba.conf but the user's password on the server is encrypted for SCRAM
-//   (see below), then SCRAM-based authentication will automatically be chosen instead.
-//   https://www.postgresql.org/docs/15/auth-password.html
-//
-// So it's safe to set md5 here, as `control-plane` anyway uses SCRAM for all roles.
+pub const DEFAULT_CONNSTRING: &str = "host=localhost user=postgres";
 pub const PG_HBA_ALL_MD5: &str = "host\tall\t\tall\t\t0.0.0.0/0\t\tmd5";

compute_tools/src/pg_helpers.rs

@@ -1,43 +1,54 @@
-use std::fmt::Write;
-use std::fs;
-use std::fs::File;
-use std::io::{BufRead, BufReader};
+use std::net::{SocketAddr, TcpStream};
 use std::os::unix::fs::PermissionsExt;
 use std::path::Path;
-use std::process::Child;
-use std::time::{Duration, Instant};
+use std::process::Command;
+use std::str::FromStr;
+use std::{fs, thread, time};
 
-use anyhow::{bail, Result};
-use notify::{RecursiveMode, Watcher};
+use anyhow::{anyhow, Result};
 use postgres::{Client, Transaction};
-use tracing::{debug, instrument};
+use serde::Deserialize;
 
-use compute_api::spec::{Database, GenericOption, GenericOptions, PgIdent, Role};
+const POSTGRES_WAIT_TIMEOUT: u64 = 60 * 1000; // milliseconds
 
-const POSTGRES_WAIT_TIMEOUT: Duration = Duration::from_millis(60 * 1000); // milliseconds
-
-/// Escape a string for including it in a SQL literal
-fn escape_literal(s: &str) -> String {
-    s.replace('\'', "''").replace('\\', "\\\\")
+/// Rust representation of Postgres role info with only those fields
+/// that matter for us.
+#[derive(Clone, Deserialize)]
+pub struct Role {
+    pub name: PgIdent,
+    pub encrypted_password: Option<String>,
+    pub options: GenericOptions,
 }
 
-/// Escape a string so that it can be used in postgresql.conf.
-/// Same as escape_literal, currently.
-pub fn escape_conf_value(s: &str) -> String {
-    s.replace('\'', "''").replace('\\', "\\\\")
+/// Rust representation of Postgres database info with only those fields
+/// that matter for us.
+#[derive(Clone, Deserialize)]
+pub struct Database {
+    pub name: PgIdent,
+    pub owner: PgIdent,
+    pub options: GenericOptions,
 }
 
-trait GenericOptionExt {
-    fn to_pg_option(&self) -> String;
-    fn to_pg_setting(&self) -> String;
+/// Common type representing both SQL statement params with or without value,
+/// like `LOGIN` or `OWNER username` in the `CREATE/ALTER ROLE`, and config
+/// options like `wal_level = logical`.
+#[derive(Clone, Deserialize)]
+pub struct GenericOption {
+    pub name: String,
+    pub value: Option<String>,
+    pub vartype: String,
 }
 
-impl GenericOptionExt for GenericOption {
+/// Optional collection of `GenericOption`'s. Type alias allows us to
+/// declare a `trait` on it.
+pub type GenericOptions = Option<Vec<GenericOption>>;
+
+impl GenericOption {
     /// Represent `GenericOption` as SQL statement parameter.
-    fn to_pg_option(&self) -> String {
+    pub fn to_pg_option(&self) -> String {
         if let Some(val) = &self.value {
             match self.vartype.as_ref() {
-                "string" => format!("{} '{}'", self.name, escape_literal(val)),
+                "string" => format!("{} '{}'", self.name, val),
                 _ => format!("{} {}", self.name, val),
             }
         } else {
@@ -46,10 +57,10 @@ impl GenericOptionExt for GenericOption {
     }
 
     /// Represent `GenericOption` as configuration option.
-    fn to_pg_setting(&self) -> String {
+    pub fn to_pg_setting(&self) -> String {
         if let Some(val) = &self.value {
             match self.vartype.as_ref() {
-                "string" => format!("{} = '{}'", self.name, escape_conf_value(val)),
+                "string" => format!("{} = '{}'", self.name, val),
                 _ => format!("{} = {}", self.name, val),
             }
         } else {
@@ -85,7 +96,6 @@ impl PgOptionsSerialize for GenericOptions {
                 .map(|op| op.to_pg_setting())
                 .collect::<Vec<String>>()
                 .join("\n")
-                + "\n" // newline after last setting
         } else {
             "".to_string()
         }
@@ -94,47 +104,35 @@ impl PgOptionsSerialize for GenericOptions {
 
 pub trait GenericOptionsSearch {
     fn find(&self, name: &str) -> Option<String>;
-    fn find_ref(&self, name: &str) -> Option<&GenericOption>;
 }
 
 impl GenericOptionsSearch for GenericOptions {
     /// Lookup option by name
     fn find(&self, name: &str) -> Option<String> {
-        let ops = self.as_ref()?;
-        let op = ops.iter().find(|s| s.name == name)?;
-        op.value.clone()
-    }
-
-    /// Lookup option by name, returning ref
-    fn find_ref(&self, name: &str) -> Option<&GenericOption> {
-        let ops = self.as_ref()?;
-        ops.iter().find(|s| s.name == name)
+        match &self {
+            Some(ops) => {
+                let op = ops.iter().find(|s| s.name == name);
+                match op {
+                    Some(op) => op.value.clone(),
+                    None => None,
+                }
+            }
+            None => None,
+        }
     }
 }
 
-pub trait RoleExt {
-    fn to_pg_options(&self) -> String;
-}
-
-impl RoleExt for Role {
+impl Role {
     /// Serialize a list of role parameters into a Postgres-acceptable
     /// string of arguments.
-    fn to_pg_options(&self) -> String {
-        // XXX: consider putting LOGIN as a default option somewhere higher, e.g. in control-plane.
-        let mut params: String = self.options.as_pg_options();
-        params.push_str(" LOGIN");
+    pub fn to_pg_options(&self) -> String {
+        // XXX: consider putting LOGIN as a default option somewhere higher, e.g. in Rails.
+        // For now we do not use generic `options` for roles. Once used, add
+        // `self.options.as_pg_options()` somewhere here.
+        let mut params: String = "LOGIN".to_string();
 
         if let Some(pass) = &self.encrypted_password {
-            // Some time ago we supported only md5 and treated all encrypted_password as md5.
-            // Now we also support SCRAM-SHA-256 and to preserve compatibility
-            // we treat all encrypted_password as md5 unless they starts with SCRAM-SHA-256.
-            if pass.starts_with("SCRAM-SHA-256") {
-                write!(params, " PASSWORD '{pass}'")
-                    .expect("String is documented to not to error during write operations");
-            } else {
-                write!(params, " PASSWORD 'md5{pass}'")
-                    .expect("String is documented to not to error during write operations");
-            }
+            params.push_str(&format!(" PASSWORD 'md5{}'", pass));
         } else {
             params.push_str(" PASSWORD NULL");
         }
@@ -143,37 +141,37 @@ impl RoleExt for Role {
     }
 }
 
-pub trait DatabaseExt {
-    fn to_pg_options(&self) -> String;
-}
-
-impl DatabaseExt for Database {
+impl Database {
     /// Serialize a list of database parameters into a Postgres-acceptable
     /// string of arguments.
     /// NB: `TEMPLATE` is actually also an identifier, but so far we only need
     /// to use `template0` and `template1`, so it is not a problem. Yet in the future
     /// it may require a proper quoting too.
-    fn to_pg_options(&self) -> String {
+    pub fn to_pg_options(&self) -> String {
         let mut params: String = self.options.as_pg_options();
-        write!(params, " OWNER {}", &self.owner.pg_quote())
-            .expect("String is documented to not to error during write operations");
+        params.push_str(&format!(" OWNER {}", &self.owner.quote()));
 
         params
     }
 }
 
-/// Generic trait used to provide quoting / encoding for strings used in the
-/// Postgres SQL queries and DATABASE_URL.
-pub trait Escaping {
-    fn pg_quote(&self) -> String;
+/// String type alias representing Postgres identifier and
+/// intended to be used for DB / role names.
+pub type PgIdent = String;
+
+/// Generic trait used to provide quoting for strings used in the
+/// Postgres SQL queries. Currently used only to implement quoting
+/// of identifiers, but could be used for literals in the future.
+pub trait PgQuote {
+    fn quote(&self) -> String;
 }
 
-impl Escaping for PgIdent {
+impl PgQuote for PgIdent {
     /// This is intended to mimic Postgres quote_ident(), but for simplicity it
-    /// always quotes provided string with `""` and escapes every `"`.
-    /// **Not idempotent**, i.e. if string is already escaped it will be escaped again.
-    fn pg_quote(&self) -> String {
-        let result = format!("\"{}\"", self.replace('"', "\"\""));
+    /// always quotes provided string with `""` and escapes every `"`. Not idempotent,
+    /// i.e. if string is already escaped it will be escaped again.
+    fn quote(&self) -> String {
+        let result = format!("\"{}\"", self.replace("\"", "\"\""));
         result
     }
 }
@@ -212,113 +210,45 @@ pub fn get_existing_dbs(client: &mut Client) -> Result<Vec<Database>> {
     Ok(postgres_dbs)
 }
 
-/// Wait for Postgres to become ready to accept connections. It's ready to
-/// accept connections when the state-field in `pgdata/postmaster.pid` says
-/// 'ready'.
-#[instrument(skip(pg))]
-pub fn wait_for_postgres(pg: &mut Child, pgdata: &Path) -> Result<()> {
+/// Wait for Postgres to become ready to accept connections:
+/// - state should be `ready` in the `pgdata/postmaster.pid`
+/// - and we should be able to connect to 127.0.0.1:5432
+pub fn wait_for_postgres(port: &str, pgdata: &Path) -> Result<()> {
     let pid_path = pgdata.join("postmaster.pid");
+    let mut slept: u64 = 0; // ms
+    let pause = time::Duration::from_millis(100);
 
-    // PostgreSQL writes line "ready" to the postmaster.pid file, when it has
-    // completed initialization and is ready to accept connections. We want to
-    // react quickly and perform the rest of our initialization as soon as
-    // PostgreSQL starts accepting connections. Use 'notify' to be notified
-    // whenever the PID file is changed, and whenever it changes, read it to
-    // check if it's now "ready".
-    //
-    // You cannot actually watch a file before it exists, so we first watch the
-    // data directory, and once the postmaster.pid file appears, we switch to
-    // watch the file instead. We also wake up every 100 ms to poll, just in
-    // case we miss some events for some reason. Not strictly necessary, but
-    // better safe than sorry.
-    let (tx, rx) = std::sync::mpsc::channel();
-    let (mut watcher, rx): (Box<dyn Watcher>, _) = match notify::recommended_watcher(move |res| {
-        let _ = tx.send(res);
-    }) {
-        Ok(watcher) => (Box::new(watcher), rx),
-        Err(e) => {
-            match e.kind {
-                notify::ErrorKind::Io(os) if os.raw_os_error() == Some(38) => {
-                    // docker on m1 macs does not support recommended_watcher
-                    // but return "Function not implemented (os error 38)"
-                    // see https://github.com/notify-rs/notify/issues/423
-                    let (tx, rx) = std::sync::mpsc::channel();
+    let timeout = time::Duration::from_millis(200);
+    let addr = SocketAddr::from_str(&format!("127.0.0.1:{}", port)).unwrap();
 
-                    // let's poll it faster than what we check the results for (100ms)
-                    let config =
-                        notify::Config::default().with_poll_interval(Duration::from_millis(50));
-
-                    let watcher = notify::PollWatcher::new(
-                        move |res| {
-                            let _ = tx.send(res);
-                        },
-                        config,
-                    )?;
-
-                    (Box::new(watcher), rx)
-                }
-                _ => return Err(e.into()),
-            }
-        }
-    };
-
-    watcher.watch(pgdata, RecursiveMode::NonRecursive)?;
-
-    let started_at = Instant::now();
-    let mut postmaster_pid_seen = false;
     loop {
-        if let Ok(Some(status)) = pg.try_wait() {
-            // Postgres exited, that is not what we expected, bail out earlier.
-            let code = status.code().unwrap_or(-1);
-            bail!("Postgres exited unexpectedly with code {}", code);
+        // Sleep POSTGRES_WAIT_TIMEOUT at max (a bit longer actually if consider a TCP timeout,
+        // but postgres starts listening almost immediately, even if it is not really
+        // ready to accept connections).
+        if slept >= POSTGRES_WAIT_TIMEOUT {
+            return Err(anyhow!("timed out while waiting for Postgres to start"));
         }
 
-        let res = rx.recv_timeout(Duration::from_millis(100));
-        debug!("woken up by notify: {res:?}");
-        // If there are multiple events in the channel already, we only need to be
-        // check once. Swallow the extra events before we go ahead to check the
-        // pid file.
-        while let Ok(res) = rx.try_recv() {
-            debug!("swallowing extra event: {res:?}");
-        }
+        if pid_path.exists() {
+            // XXX: dumb and the simplest way to get the last line in a text file
+            // TODO: better use `.lines().last()` later
+            let stdout = Command::new("tail")
+                .args(&["-n1", pid_path.to_str().unwrap()])
+                .output()?
+                .stdout;
+            let status = String::from_utf8(stdout)?;
+            let can_connect = TcpStream::connect_timeout(&addr, timeout).is_ok();
 
-        // Check that we can open pid file first.
-        if let Ok(file) = File::open(&pid_path) {
-            if !postmaster_pid_seen {
-                debug!("postmaster.pid appeared");
-                watcher
-                    .unwatch(pgdata)
-                    .expect("Failed to remove pgdata dir watch");
-                watcher
-                    .watch(&pid_path, RecursiveMode::NonRecursive)
-                    .expect("Failed to add postmaster.pid file watch");
-                postmaster_pid_seen = true;
-            }
-
-            let file = BufReader::new(file);
-            let last_line = file.lines().last();
-
-            // Pid file could be there and we could read it, but it could be empty, for example.
-            if let Some(Ok(line)) = last_line {
-                let status = line.trim();
-                debug!("last line of postmaster.pid: {status:?}");
-
-                // Now Postgres is ready to accept connections
-                if status == "ready" {
-                    break;
-                }
+            // Now Postgres is ready to accept connections
+            if status.trim() == "ready" && can_connect {
+                break;
             }
         }
 
-        // Give up after POSTGRES_WAIT_TIMEOUT.
-        let duration = started_at.elapsed();
-        if duration >= POSTGRES_WAIT_TIMEOUT {
-            bail!("timed out while waiting for Postgres to start");
-        }
+        thread::sleep(pause);
+        slept += 100;
     }
 
-    tracing::info!("PostgreSQL is now running, continuing to configure it");
-
     Ok(())
 }
 

compute_tools/src/spec.rs

@@ -1,127 +1,18 @@
-use std::fs::File;
 use std::path::Path;
-use std::str::FromStr;
 
-use anyhow::{anyhow, bail, Result};
-use postgres::config::Config;
-use postgres::{Client, NoTls};
-use reqwest::StatusCode;
-use tracing::{error, info, info_span, instrument, span_enabled, warn, Level};
+use anyhow::Result;
+use log::{info, log_enabled, warn, Level};
+use postgres::Client;
 
 use crate::config;
 use crate::params::PG_HBA_ALL_MD5;
 use crate::pg_helpers::*;
-
-use compute_api::responses::{ControlPlaneComputeStatus, ControlPlaneSpecResponse};
-use compute_api::spec::{ComputeSpec, Database, PgIdent, Role};
-
-// Do control plane request and return response if any. In case of error it
-// returns a bool flag indicating whether it makes sense to retry the request
-// and a string with error message.
-fn do_control_plane_request(
-    uri: &str,
-    jwt: &str,
-) -> Result<ControlPlaneSpecResponse, (bool, String)> {
-    let resp = reqwest::blocking::Client::new()
-        .get(uri)
-        .header("Authorization", jwt)
-        .send()
-        .map_err(|e| {
-            (
-                true,
-                format!("could not perform spec request to control plane: {}", e),
-            )
-        })?;
-
-    match resp.status() {
-        StatusCode::OK => match resp.json::<ControlPlaneSpecResponse>() {
-            Ok(spec_resp) => Ok(spec_resp),
-            Err(e) => Err((
-                true,
-                format!("could not deserialize control plane response: {}", e),
-            )),
-        },
-        StatusCode::SERVICE_UNAVAILABLE => {
-            Err((true, "control plane is temporarily unavailable".to_string()))
-        }
-        StatusCode::BAD_GATEWAY => {
-            // We have a problem with intermittent 502 errors now
-            // https://github.com/neondatabase/cloud/issues/2353
-            // It's fine to retry GET request in this case.
-            Err((true, "control plane request failed with 502".to_string()))
-        }
-        // Another code, likely 500 or 404, means that compute is unknown to the control plane
-        // or some internal failure happened. Doesn't make much sense to retry in this case.
-        _ => Err((
-            false,
-            format!(
-                "unexpected control plane response status code: {}",
-                resp.status()
-            ),
-        )),
-    }
-}
-
-/// Request spec from the control-plane by compute_id. If `NEON_CONTROL_PLANE_TOKEN`
-/// env variable is set, it will be used for authorization.
-pub fn get_spec_from_control_plane(
-    base_uri: &str,
-    compute_id: &str,
-) -> Result<Option<ComputeSpec>> {
-    let cp_uri = format!("{base_uri}/management/api/v2/computes/{compute_id}/spec");
-    let jwt: String = match std::env::var("NEON_CONTROL_PLANE_TOKEN") {
-        Ok(v) => v,
-        Err(_) => "".to_string(),
-    };
-    let mut attempt = 1;
-    let mut spec: Result<Option<ComputeSpec>> = Ok(None);
-
-    info!("getting spec from control plane: {}", cp_uri);
-
-    // Do 3 attempts to get spec from the control plane using the following logic:
-    // - network error -> then retry
-    // - compute id is unknown or any other error -> bail out
-    // - no spec for compute yet (Empty state) -> return Ok(None)
-    // - got spec -> return Ok(Some(spec))
-    while attempt < 4 {
-        spec = match do_control_plane_request(&cp_uri, &jwt) {
-            Ok(spec_resp) => match spec_resp.status {
-                ControlPlaneComputeStatus::Empty => Ok(None),
-                ControlPlaneComputeStatus::Attached => {
-                    if let Some(spec) = spec_resp.spec {
-                        Ok(Some(spec))
-                    } else {
-                        bail!("compute is attached, but spec is empty")
-                    }
-                }
-            },
-            Err((retry, msg)) => {
-                if retry {
-                    Err(anyhow!(msg))
-                } else {
-                    bail!(msg);
-                }
-            }
-        };
-
-        if let Err(e) = &spec {
-            error!("attempt {} to get spec failed with: {}", attempt, e);
-        } else {
-            return spec;
-        }
-
-        attempt += 1;
-        std::thread::sleep(std::time::Duration::from_millis(100));
-    }
-
-    // All attempts failed, return error.
-    spec
-}
+use crate::zenith::ClusterSpec;
 
 /// It takes cluster specification and does the following:
 /// - Serialize cluster config and put it into `postgresql.conf` completely rewriting the file.
 /// - Update `pg_hba.conf` to allow external connections.
-pub fn handle_configuration(spec: &ComputeSpec, pgdata_path: &Path) -> Result<()> {
+pub fn handle_configuration(spec: &ClusterSpec, pgdata_path: &Path) -> Result<()> {
     // File `postgresql.conf` is no longer included into `basebackup`, so just
     // always write all config into it creating new file.
     config::write_postgres_conf(&pgdata_path.join("postgresql.conf"), spec)?;
@@ -146,53 +37,41 @@ pub fn update_pg_hba(pgdata_path: &Path) -> Result<()> {
     Ok(())
 }
 
-/// Create a standby.signal file
-pub fn add_standby_signal(pgdata_path: &Path) -> Result<()> {
-    // XXX: consider making it a part of spec.json
-    info!("adding standby.signal");
-    let signalfile = pgdata_path.join("standby.signal");
-
-    if !signalfile.exists() {
-        info!("created standby.signal");
-        File::create(signalfile)?;
-    } else {
-        info!("reused pre-existing standby.signal");
-    }
-    Ok(())
-}
-
 /// Given a cluster spec json and open transaction it handles roles creation,
 /// deletion and update.
-#[instrument(skip_all)]
-pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
+pub fn handle_roles(spec: &ClusterSpec, client: &mut Client) -> Result<()> {
     let mut xact = client.transaction()?;
     let existing_roles: Vec<Role> = get_existing_roles(&mut xact)?;
 
     // Print a list of existing Postgres roles (only in debug mode)
-    if span_enabled!(Level::INFO) {
-        info!("postgres roles:");
-        for r in &existing_roles {
-            info!(
-                "    - {}:{}",
-                r.name,
-                if r.encrypted_password.is_some() {
-                    "[FILTERED]"
-                } else {
-                    "(null)"
-                }
-            );
-        }
+    info!("postgres roles:");
+    for r in &existing_roles {
+        info_println!(
+            "{} - {}:{}",
+            " ".repeat(27 + 5),
+            r.name,
+            if r.encrypted_password.is_some() {
+                "[FILTERED]"
+            } else {
+                "(null)"
+            }
+        );
     }
 
     // Process delta operations first
     if let Some(ops) = &spec.delta_operations {
-        info!("processing role renames");
+        info!("processing delta operations on roles");
         for op in ops {
             match op.action.as_ref() {
+                // We do not check either role exists or not,
+                // Postgres will take care of it for us
                 "delete_role" => {
-                    // no-op now, roles will be deleted at the end of configuration
+                    let query: String = format!("DROP ROLE IF EXISTS {}", &op.name.quote());
+
+                    warn!("deleting role '{}'", &op.name);
+                    xact.execute(query.as_str(), &[])?;
                 }
-                // Renaming role drops its password, since role name is
+                // Renaming role drops its password, since tole name is
                 // used as a salt there.  It is important that this role
                 // is recorded with a new `name` in the `roles` list.
                 // Follow up roles update will set the new password.
@@ -203,8 +82,8 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                     if existing_roles.iter().any(|r| r.name == op.name) {
                         let query: String = format!(
                             "ALTER ROLE {} RENAME TO {}",
-                            op.name.pg_quote(),
-                            new_name.pg_quote()
+                            op.name.quote(),
+                            new_name.quote()
                         );
 
                         warn!("renaming role '{}' to '{}'", op.name, new_name);
@@ -222,80 +101,51 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
     info!("cluster spec roles:");
     for role in &spec.cluster.roles {
         let name = &role.name;
-        // XXX: with a limited number of roles it is fine, but consider making it a HashMap
-        let pg_role = existing_roles.iter().find(|r| r.name == *name);
 
-        enum RoleAction {
-            None,
-            Update,
-            Create,
-        }
-        let action = if let Some(r) = pg_role {
-            if (r.encrypted_password.is_none() && role.encrypted_password.is_some())
-                || (r.encrypted_password.is_some() && role.encrypted_password.is_none())
-            {
-                RoleAction::Update
-            } else if let Some(pg_pwd) = &r.encrypted_password {
-                // Check whether password changed or not (trim 'md5' prefix first if any)
-                //
-                // This is a backward compatibility hack, which comes from the times when we were using
-                // md5 for everyone and hashes were stored in the console db without md5 prefix. So when
-                // role comes from the control-plane (json spec) `Role.encrypted_password` doesn't have md5 prefix,
-                // but when role comes from Postgres (`get_existing_roles` / `existing_roles`) it has this prefix.
-                // Here is the only place so far where we compare hashes, so it seems to be the best candidate
-                // to place this compatibility layer.
-                let pg_pwd = if let Some(stripped) = pg_pwd.strip_prefix("md5") {
-                    stripped
-                } else {
-                    pg_pwd
-                };
-                if pg_pwd != *role.encrypted_password.as_ref().unwrap() {
-                    RoleAction::Update
-                } else {
-                    RoleAction::None
-                }
-            } else {
-                RoleAction::None
-            }
-        } else {
-            RoleAction::Create
-        };
-
-        match action {
-            RoleAction::None => {}
-            RoleAction::Update => {
-                let mut query: String = format!("ALTER ROLE {} ", name.pg_quote());
-                query.push_str(&role.to_pg_options());
-                xact.execute(query.as_str(), &[])?;
-            }
-            RoleAction::Create => {
-                let mut query: String = format!("CREATE ROLE {} ", name.pg_quote());
-                info!("role create query: '{}'", &query);
-                query.push_str(&role.to_pg_options());
-                xact.execute(query.as_str(), &[])?;
-
-                let grant_query = format!(
-                    "GRANT pg_read_all_data, pg_write_all_data TO {}",
-                    name.pg_quote()
-                );
-                xact.execute(grant_query.as_str(), &[])?;
-                info!("role grant query: '{}'", &grant_query);
-            }
-        }
-
-        if span_enabled!(Level::INFO) {
-            let pwd = if role.encrypted_password.is_some() {
+        info_print!(
+            "{} - {}:{}",
+            " ".repeat(27 + 5),
+            name,
+            if role.encrypted_password.is_some() {
                 "[FILTERED]"
             } else {
                 "(null)"
-            };
-            let action_str = match action {
-                RoleAction::None => "",
-                RoleAction::Create => " -> create",
-                RoleAction::Update => " -> update",
-            };
-            info!("   - {}:{}{}", name, pwd, action_str);
+            }
+        );
+
+        // XXX: with a limited number of roles it is fine, but consider making it a HashMap
+        let pg_role = existing_roles.iter().find(|r| r.name == *name);
+
+        if let Some(r) = pg_role {
+            let mut update_role = false;
+
+            if (r.encrypted_password.is_none() && role.encrypted_password.is_some())
+                || (r.encrypted_password.is_some() && role.encrypted_password.is_none())
+            {
+                update_role = true;
+            } else if let Some(pg_pwd) = &r.encrypted_password {
+                // Check whether password changed or not (trim 'md5:' prefix first)
+                update_role = pg_pwd[3..] != *role.encrypted_password.as_ref().unwrap();
+            }
+
+            if update_role {
+                let mut query: String = format!("ALTER ROLE {} ", name.quote());
+                info_print!(" -> update");
+
+                query.push_str(&role.to_pg_options());
+                xact.execute(query.as_str(), &[])?;
+            }
+        } else {
+            info!("role name {}", &name);
+            let mut query: String = format!("CREATE ROLE {} ", name.quote());
+            info!("role create query {}", &query);
+            info_print!(" -> create");
+
+            query.push_str(&role.to_pg_options());
+            xact.execute(query.as_str(), &[])?;
         }
+
+        info_print!("\n");
     }
 
     xact.commit()?;
@@ -303,94 +153,18 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
     Ok(())
 }
 
-/// Reassign all dependent objects and delete requested roles.
-#[instrument(skip_all)]
-pub fn handle_role_deletions(spec: &ComputeSpec, connstr: &str, client: &mut Client) -> Result<()> {
-    if let Some(ops) = &spec.delta_operations {
-        // First, reassign all dependent objects to db owners.
-        info!("reassigning dependent objects of to-be-deleted roles");
-
-        // Fetch existing roles. We could've exported and used `existing_roles` from
-        // `handle_roles()`, but we only make this list there before creating new roles.
-        // Which is probably fine as we never create to-be-deleted roles, but that'd
-        // just look a bit untidy. Anyway, the entire `pg_roles` should be in shared
-        // buffers already, so this shouldn't be a big deal.
-        let mut xact = client.transaction()?;
-        let existing_roles: Vec<Role> = get_existing_roles(&mut xact)?;
-        xact.commit()?;
-
-        for op in ops {
-            // Check that role is still present in Postgres, as this could be a
-            // restart with the same spec after role deletion.
-            if op.action == "delete_role" && existing_roles.iter().any(|r| r.name == op.name) {
-                reassign_owned_objects(spec, connstr, &op.name)?;
-            }
-        }
-
-        // Second, proceed with role deletions.
-        info!("processing role deletions");
-        let mut xact = client.transaction()?;
-        for op in ops {
-            // We do not check either role exists or not,
-            // Postgres will take care of it for us
-            if op.action == "delete_role" {
-                let query: String = format!("DROP ROLE IF EXISTS {}", &op.name.pg_quote());
-
-                warn!("deleting role '{}'", &op.name);
-                xact.execute(query.as_str(), &[])?;
-            }
-        }
-        xact.commit()?;
-    }
-
-    Ok(())
-}
-
-// Reassign all owned objects in all databases to the owner of the database.
-fn reassign_owned_objects(spec: &ComputeSpec, connstr: &str, role_name: &PgIdent) -> Result<()> {
-    for db in &spec.cluster.databases {
-        if db.owner != *role_name {
-            let mut conf = Config::from_str(connstr)?;
-            conf.dbname(&db.name);
-
-            let mut client = conf.connect(NoTls)?;
-
-            // This will reassign all dependent objects to the db owner
-            let reassign_query = format!(
-                "REASSIGN OWNED BY {} TO {}",
-                role_name.pg_quote(),
-                db.owner.pg_quote()
-            );
-            info!(
-                "reassigning objects owned by '{}' in db '{}' to '{}'",
-                role_name, &db.name, &db.owner
-            );
-            client.simple_query(&reassign_query)?;
-
-            // This now will only drop privileges of the role
-            let drop_query = format!("DROP OWNED BY {}", role_name.pg_quote());
-            client.simple_query(&drop_query)?;
-        }
-    }
-
-    Ok(())
-}
-
 /// It follows mostly the same logic as `handle_roles()` excepting that we
 /// does not use an explicit transactions block, since major database operations
 /// like `CREATE DATABASE` and `DROP DATABASE` do not support it. Statement-level
 /// atomicity should be enough here due to the order of operations and various checks,
 /// which together provide us idempotency.
-#[instrument(skip_all)]
-pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
+pub fn handle_databases(spec: &ClusterSpec, client: &mut Client) -> Result<()> {
     let existing_dbs: Vec<Database> = get_existing_dbs(client)?;
 
     // Print a list of existing Postgres databases (only in debug mode)
-    if span_enabled!(Level::INFO) {
-        info!("postgres databases:");
-        for r in &existing_dbs {
-            info!("    {}:{}", r.name, r.owner);
-        }
+    info!("postgres databases:");
+    for r in &existing_dbs {
+        info_println!("{} - {}:{}", " ".repeat(27 + 5), r.name, r.owner);
     }
 
     // Process delta operations first
@@ -401,7 +175,7 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                 // We do not check either DB exists or not,
                 // Postgres will take care of it for us
                 "delete_db" => {
-                    let query: String = format!("DROP DATABASE IF EXISTS {}", &op.name.pg_quote());
+                    let query: String = format!("DROP DATABASE IF EXISTS {}", &op.name.quote());
 
                     warn!("deleting database '{}'", &op.name);
                     client.execute(query.as_str(), &[])?;
@@ -413,8 +187,8 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                     if existing_dbs.iter().any(|r| r.name == op.name) {
                         let query: String = format!(
                             "ALTER DATABASE {} RENAME TO {}",
-                            op.name.pg_quote(),
-                            new_name.pg_quote()
+                            op.name.quote(),
+                            new_name.quote()
                         );
 
                         warn!("renaming database '{}' to '{}'", op.name, new_name);
@@ -433,178 +207,39 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
     for db in &spec.cluster.databases {
         let name = &db.name;
 
+        info_print!("{} - {}:{}", " ".repeat(27 + 5), db.name, db.owner);
+
         // XXX: with a limited number of databases it is fine, but consider making it a HashMap
         let pg_db = existing_dbs.iter().find(|r| r.name == *name);
 
-        enum DatabaseAction {
-            None,
-            Update,
-            Create,
-        }
-        let action = if let Some(r) = pg_db {
+        if let Some(r) = pg_db {
             // XXX: db owner name is returned as quoted string from Postgres,
             // when quoting is needed.
-            let new_owner = if r.owner.starts_with('"') {
-                db.owner.pg_quote()
+            let new_owner = if r.owner.starts_with('\"') {
+                db.owner.quote()
             } else {
                 db.owner.clone()
             };
 
             if new_owner != r.owner {
-                // Update the owner
-                DatabaseAction::Update
-            } else {
-                DatabaseAction::None
-            }
-        } else {
-            DatabaseAction::Create
-        };
-
-        match action {
-            DatabaseAction::None => {}
-            DatabaseAction::Update => {
                 let query: String = format!(
                     "ALTER DATABASE {} OWNER TO {}",
-                    name.pg_quote(),
-                    db.owner.pg_quote()
+                    name.quote(),
+                    db.owner.quote()
                 );
-                let _guard = info_span!("executing", query).entered();
+                info_print!(" -> update");
+
                 client.execute(query.as_str(), &[])?;
             }
-            DatabaseAction::Create => {
-                let mut query: String = format!("CREATE DATABASE {} ", name.pg_quote());
-                query.push_str(&db.to_pg_options());
-                let _guard = info_span!("executing", query).entered();
-                client.execute(query.as_str(), &[])?;
-            }
-        };
+        } else {
+            let mut query: String = format!("CREATE DATABASE {} ", name.quote());
+            info_print!(" -> create");
 
-        if span_enabled!(Level::INFO) {
-            let action_str = match action {
-                DatabaseAction::None => "",
-                DatabaseAction::Create => " -> create",
-                DatabaseAction::Update => " -> update",
-            };
-            info!("   - {}:{}{}", db.name, db.owner, action_str);
-        }
-    }
-
-    Ok(())
-}
-
-/// Grant CREATE ON DATABASE to the database owner and do some other alters and grants
-/// to allow users creating trusted extensions and re-creating `public` schema, for example.
-#[instrument(skip_all)]
-pub fn handle_grants(spec: &ComputeSpec, connstr: &str, client: &mut Client) -> Result<()> {
-    info!("cluster spec grants:");
-
-    // We now have a separate `web_access` role to connect to the database
-    // via the web interface and proxy link auth. And also we grant a
-    // read / write all data privilege to every role. So also grant
-    // create to everyone.
-    // XXX: later we should stop messing with Postgres ACL in such horrible
-    // ways.
-    let roles = spec
-        .cluster
-        .roles
-        .iter()
-        .map(|r| r.name.pg_quote())
-        .collect::<Vec<_>>();
-
-    for db in &spec.cluster.databases {
-        let dbname = &db.name;
-
-        let query: String = format!(
-            "GRANT CREATE ON DATABASE {} TO {}",
-            dbname.pg_quote(),
-            roles.join(", ")
-        );
-        info!("grant query {}", &query);
-
-        client.execute(query.as_str(), &[])?;
-    }
-
-    // Do some per-database access adjustments. We'd better do this at db creation time,
-    // but CREATE DATABASE isn't transactional. So we cannot create db + do some grants
-    // atomically.
-    for db in &spec.cluster.databases {
-        let mut conf = Config::from_str(connstr)?;
-        conf.dbname(&db.name);
-
-        let mut db_client = conf.connect(NoTls)?;
-
-        // This will only change ownership on the schema itself, not the objects
-        // inside it. Without it owner of the `public` schema will be `cloud_admin`
-        // and database owner cannot do anything with it. SQL procedure ensures
-        // that it won't error out if schema `public` doesn't exist.
-        let alter_query = format!(
-            "DO $$\n\
-                DECLARE\n\
-                    schema_owner TEXT;\n\
-                BEGIN\n\
-                    IF EXISTS(\n\
-                        SELECT nspname\n\
-                        FROM pg_catalog.pg_namespace\n\
-                        WHERE nspname = 'public'\n\
-                    )\n\
-                    THEN\n\
-                        SELECT nspowner::regrole::text\n\
-                            FROM pg_catalog.pg_namespace\n\
-                            WHERE nspname = 'public'\n\
-                            INTO schema_owner;\n\
-                \n\
-                        IF schema_owner = 'cloud_admin' OR schema_owner = 'zenith_admin'\n\
-                        THEN\n\
-                            ALTER SCHEMA public OWNER TO {};\n\
-                        END IF;\n\
-                    END IF;\n\
-                END\n\
-            $$;",
-            db.owner.pg_quote()
-        );
-        db_client.simple_query(&alter_query)?;
-
-        // Explicitly grant CREATE ON SCHEMA PUBLIC to the web_access user.
-        // This is needed because since postgres 15 this privilege is removed by default.
-        let grant_query = "DO $$\n\
-                BEGIN\n\
-                    IF EXISTS(\n\
-                        SELECT nspname\n\
-                        FROM pg_catalog.pg_namespace\n\
-                        WHERE nspname = 'public'\n\
-                    ) AND\n\
-                    current_setting('server_version_num')::int/10000 >= 15\n\
-                    THEN\n\
-                        IF EXISTS(\n\
-                            SELECT rolname\n\
-                            FROM pg_catalog.pg_roles\n\
-                            WHERE rolname = 'web_access'\n\
-                        )\n\
-                        THEN\n\
-                            GRANT CREATE ON SCHEMA public TO web_access;\n\
-                        END IF;\n\
-                    END IF;\n\
-                END\n\
-            $$;"
-        .to_string();
-
-        info!("grant query for db {} : {}", &db.name, &grant_query);
-        db_client.simple_query(&grant_query)?;
-    }
-
-    Ok(())
-}
-
-/// Create required system extensions
-#[instrument(skip_all)]
-pub fn handle_extensions(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
-    if let Some(libs) = spec.cluster.settings.find("shared_preload_libraries") {
-        if libs.contains("pg_stat_statements") {
-            // Create extension only if this compute really needs it
-            let query = "CREATE EXTENSION IF NOT EXISTS pg_stat_statements";
-            info!("creating system extensions with query: {}", query);
-            client.simple_query(query)?;
+            query.push_str(&db.to_pg_options());
+            client.execute(query.as_str(), &[])?;
         }
+
+        info_print!("\n");
     }
 
     Ok(())

compute_tools/src/zenith.rs

@@ -0,0 +1,107 @@
+use std::process::{Command, Stdio};
+
+use anyhow::Result;
+use chrono::{DateTime, Utc};
+use postgres::{Client, NoTls};
+use serde::Deserialize;
+
+use crate::pg_helpers::*;
+
+/// Compute node state shared across several `zenith_ctl` threads.
+/// Should be used under `RwLock` to allow HTTP API server to serve
+/// status requests, while configuration is in progress.
+pub struct ComputeState {
+    pub connstr: String,
+    pub pgdata: String,
+    pub pgbin: String,
+    pub spec: ClusterSpec,
+    /// Compute setup process has finished
+    pub ready: bool,
+    /// Timestamp of the last Postgres activity
+    pub last_active: DateTime<Utc>,
+}
+
+/// Cluster spec or configuration represented as an optional number of
+/// delta operations + final cluster state description.
+#[derive(Clone, Deserialize)]
+pub struct ClusterSpec {
+    pub format_version: f32,
+    pub timestamp: String,
+    pub operation_uuid: Option<String>,
+    /// Expected cluster state at the end of transition process.
+    pub cluster: Cluster,
+    pub delta_operations: Option<Vec<DeltaOp>>,
+}
+
+/// Cluster state seen from the perspective of the external tools
+/// like Rails web console.
+#[derive(Clone, Deserialize)]
+pub struct Cluster {
+    pub cluster_id: String,
+    pub name: String,
+    pub state: Option<String>,
+    pub roles: Vec<Role>,
+    pub databases: Vec<Database>,
+    pub settings: GenericOptions,
+}
+
+/// Single cluster state changing operation that could not be represented as
+/// a static `Cluster` structure. For example:
+/// - DROP DATABASE
+/// - DROP ROLE
+/// - ALTER ROLE name RENAME TO new_name
+/// - ALTER DATABASE name RENAME TO new_name
+#[derive(Clone, Deserialize)]
+pub struct DeltaOp {
+    pub action: String,
+    pub name: PgIdent,
+    pub new_name: Option<PgIdent>,
+}
+
+/// Get basebackup from the libpq connection to pageserver using `connstr` and
+/// unarchive it to `pgdata` directory overriding all its previous content.
+pub fn get_basebackup(
+    pgdata: &str,
+    connstr: &str,
+    tenant: &str,
+    timeline: &str,
+    lsn: &str,
+) -> Result<()> {
+    let mut client = Client::connect(connstr, NoTls)?;
+    let basebackup_cmd = match lsn {
+        "0/0" => format!("basebackup {} {}", tenant, timeline), // First start of the compute
+        _ => format!("basebackup {} {} {}", tenant, timeline, lsn),
+    };
+    let copyreader = client.copy_out(basebackup_cmd.as_str())?;
+    let mut ar = tar::Archive::new(copyreader);
+
+    ar.unpack(&pgdata)?;
+
+    Ok(())
+}
+
+/// Run `postgres` in a special mode with `--sync-safekeepers` argument
+/// and return the reported LSN back to the caller.
+pub fn sync_safekeepers(pgdata: &str, pgbin: &str) -> Result<String> {
+    let sync_handle = Command::new(&pgbin)
+        .args(&["--sync-safekeepers"])
+        .env("PGDATA", &pgdata) // we cannot use -D in this mode
+        .stdout(Stdio::piped())
+        .stderr(Stdio::piped())
+        .spawn()
+        .expect("postgres --sync-safekeepers failed to start");
+
+    let sync_output = sync_handle
+        .wait_with_output()
+        .expect("postgres --sync-safekeepers failed");
+    if !sync_output.status.success() {
+        anyhow::bail!(
+            "postgres --sync-safekeepers failed: '{}'",
+            String::from_utf8_lossy(&sync_output.stderr)
+        );
+    }
+
+    let lsn = String::from(String::from_utf8(sync_output.stdout)?.trim());
+
+    Ok(lsn)
+}

compute_tools/tests/cluster_spec.json

@@ -85,7 +85,7 @@
                 "vartype": "bool"
             },
             {
-                "name": "neon.safekeepers",
+                "name": "wal_acceptors",
                 "value": "127.0.0.1:6502,127.0.0.1:6503,127.0.0.1:6501",
                 "vartype": "string"
             },
@@ -150,7 +150,7 @@
                 "vartype": "integer"
             },
             {
-                "name": "neon.tenant_id",
+                "name": "zenith.zenith_tenant",
                 "value": "b0554b632bd4d547a63b86c3630317e8",
                 "vartype": "string"
             },
@@ -160,13 +160,13 @@
                 "vartype": "integer"
             },
             {
-                "name": "neon.timeline_id",
+                "name": "zenith.zenith_timeline",
                 "value": "2414a61ffc94e428f14b5758fe308e13",
                 "vartype": "string"
             },
             {
                 "name": "shared_preload_libraries",
-                "value": "neon",
+                "value": "zenith",
                 "vartype": "string"
             },
             {
@@ -175,17 +175,13 @@
                 "vartype": "string"
             },
             {
-                "name": "neon.pageserver_connstring",
+                "name": "zenith.page_server_connstring",
                 "value": "host=127.0.0.1 port=6400",
                 "vartype": "string"
-            },
-            {
-                "name": "test.escaping",
-                "value": "here's a backslash \\ and a quote ' and a double-quote \" hooray",
-                "vartype": "string"
             }
         ]
     },
+
     "delta_operations": [
         {
             "action": "delete_db",

compute_tools/tests/pg_helpers_tests.rs

@@ -1,14 +1,15 @@
 #[cfg(test)]
 mod pg_helpers_tests {
+
     use std::fs::File;
 
-    use compute_api::spec::{ComputeSpec, GenericOption, GenericOptions, PgIdent};
     use compute_tools::pg_helpers::*;
+    use compute_tools::zenith::ClusterSpec;
 
     #[test]
     fn params_serialize() {
-        let file = File::open("../libs/compute_api/tests/cluster_spec.json").unwrap();
-        let spec: ComputeSpec = serde_json::from_reader(file).unwrap();
+        let file = File::open("tests/cluster_spec.json").unwrap();
+        let spec: ClusterSpec = serde_json::from_reader(file).unwrap();
 
         assert_eq!(
             spec.cluster.databases.first().unwrap().to_pg_options(),
@@ -16,77 +17,25 @@ mod pg_helpers_tests {
         );
         assert_eq!(
             spec.cluster.roles.first().unwrap().to_pg_options(),
-            " LOGIN PASSWORD 'md56b1d16b78004bbd51fa06af9eda75972'"
+            "LOGIN PASSWORD 'md56b1d16b78004bbd51fa06af9eda75972'"
         );
     }
 
     #[test]
     fn settings_serialize() {
-        let file = File::open("../libs/compute_api/tests/cluster_spec.json").unwrap();
-        let spec: ComputeSpec = serde_json::from_reader(file).unwrap();
+        let file = File::open("tests/cluster_spec.json").unwrap();
+        let spec: ClusterSpec = serde_json::from_reader(file).unwrap();
 
         assert_eq!(
             spec.cluster.settings.as_pg_settings(),
-            r#"fsync = off
-wal_level = replica
-hot_standby = on
-neon.safekeepers = '127.0.0.1:6502,127.0.0.1:6503,127.0.0.1:6501'
-wal_log_hints = on
-log_connections = on
-shared_buffers = 32768
-port = 55432
-max_connections = 100
-max_wal_senders = 10
-listen_addresses = '0.0.0.0'
-wal_sender_timeout = 0
-password_encryption = md5
-maintenance_work_mem = 65536
-max_parallel_workers = 8
-max_worker_processes = 8
-neon.tenant_id = 'b0554b632bd4d547a63b86c3630317e8'
-max_replication_slots = 10
-neon.timeline_id = '2414a61ffc94e428f14b5758fe308e13'
-shared_preload_libraries = 'neon'
-synchronous_standby_names = 'walproposer'
-neon.pageserver_connstring = 'host=127.0.0.1 port=6400'
-test.escaping = 'here''s a backslash \\ and a quote '' and a double-quote " hooray'
-"#
+            "fsync = off\nwal_level = replica\nhot_standby = on\nwal_acceptors = '127.0.0.1:6502,127.0.0.1:6503,127.0.0.1:6501'\nwal_log_hints = on\nlog_connections = on\nshared_buffers = 32768\nport = 55432\nmax_connections = 100\nmax_wal_senders = 10\nlisten_addresses = '0.0.0.0'\nwal_sender_timeout = 0\npassword_encryption = md5\nmaintenance_work_mem = 65536\nmax_parallel_workers = 8\nmax_worker_processes = 8\nzenith.zenith_tenant = 'b0554b632bd4d547a63b86c3630317e8'\nmax_replication_slots = 10\nzenith.zenith_timeline = '2414a61ffc94e428f14b5758fe308e13'\nshared_preload_libraries = 'zenith'\nsynchronous_standby_names = 'walproposer'\nzenith.page_server_connstring = 'host=127.0.0.1 port=6400'"
         );
     }
 
     #[test]
-    fn ident_pg_quote() {
+    fn quote_ident() {
         let ident: PgIdent = PgIdent::from("\"name\";\\n select 1;");
 
-        assert_eq!(ident.pg_quote(), "\"\"\"name\"\";\\n select 1;\"");
-    }
-
-    #[test]
-    fn generic_options_search() {
-        let generic_options: GenericOptions = Some(vec![
-            GenericOption {
-                name: "present_value".into(),
-                value: Some("value".into()),
-                vartype: "string".into(),
-            },
-            GenericOption {
-                name: "missed_value".into(),
-                value: None,
-                vartype: "int".into(),
-            },
-        ]);
-        assert_eq!(generic_options.find("present_value"), Some("value".into()));
-        assert_eq!(generic_options.find("missed_value"), None);
-        assert_eq!(generic_options.find("invalid_value"), None);
-
-        let empty_generic_options: GenericOptions = Some(vec![]);
-        assert_eq!(empty_generic_options.find("present_value"), None);
-        assert_eq!(empty_generic_options.find("missed_value"), None);
-        assert_eq!(empty_generic_options.find("invalid_value"), None);
-
-        let none_generic_options: GenericOptions = None;
-        assert_eq!(none_generic_options.find("present_value"), None);
-        assert_eq!(none_generic_options.find("missed_value"), None);
-        assert_eq!(none_generic_options.find("invalid_value"), None);
+        assert_eq!(ident.quote(), "\"\"\"name\"\";\\n select 1;\"");
     }
 }

control_plane/Cargo.toml

@@ -1,34 +1,24 @@
 [package]
 name = "control_plane"
 version = "0.1.0"
-edition.workspace = true
-license.workspace = true
+authors = ["Stas Kelvich <stas@zenith.tech>"]
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
 
 [dependencies]
-anyhow.workspace = true
-clap.workspace = true
-comfy-table.workspace = true
-git-version.workspace = true
-nix.workspace = true
-once_cell.workspace = true
-postgres.workspace = true
-regex.workspace = true
-reqwest = { workspace = true, features = ["blocking", "json"] }
-serde.workspace = true
-serde_json.workspace = true
-serde_with.workspace = true
-tar.workspace = true
-thiserror.workspace = true
-toml.workspace = true
-url.workspace = true
-# Note: Do not directly depend on pageserver or safekeeper; use pageserver_api or safekeeper_api
-# instead, so that recompile times are better.
-pageserver_api.workspace = true
-postgres_backend.workspace = true
-safekeeper_api.workspace = true
-postgres_connection.workspace = true
-storage_broker.workspace = true
-utils.workspace = true
+tar = "0.4.33"
+postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="9eb0dbfbeb6a6c1b79099b9f7ae4a8c021877858" }
+serde = { version = "1.0", features = ["derive"] }
+toml = "0.5"
+lazy_static = "1.4"
+regex = "1"
+anyhow = "1.0"
+thiserror = "1"
+nix = "0.23"
+url = "2.2.2"
+reqwest = { version = "0.11", default-features = false, features = ["blocking", "json", "rustls-tls"] }
 
-compute_api.workspace = true
-workspace_hack.workspace = true
+pageserver = { path = "../pageserver" }
+zenith_utils = { path = "../zenith_utils" }
+workspace_hack = { path = "../workspace_hack" }

control_plane/safekeepers.conf

@@ -1,21 +1,20 @@
 # Page server and three safekeepers.
 [pageserver]
-listen_pg_addr = '127.0.0.1:64000'
-listen_http_addr = '127.0.0.1:9898'
-pg_auth_type = 'Trust'
-http_auth_type = 'Trust'
+listen_pg_addr = 'localhost:64000'
+listen_http_addr = 'localhost:9898'
+auth_type = 'Trust'
 
 [[safekeepers]]
-id = 1
+name = 'sk1'
 pg_port = 5454
 http_port = 7676
 
 [[safekeepers]]
-id = 2
+name = 'sk2'
 pg_port = 5455
 http_port = 7677
 
 [[safekeepers]]
-id = 3
+name = 'sk3'
 pg_port = 5456
 http_port = 7678

control_plane/simple.conf

@@ -1,15 +1,11 @@
-# Minimal neon environment with one safekeeper. This is equivalent to the built-in
+# Minimal zenith environment with one safekeeper. This is equivalent to the built-in
 # defaults that you get with no --config
 [pageserver]
-listen_pg_addr = '127.0.0.1:64000'
-listen_http_addr = '127.0.0.1:9898'
-pg_auth_type = 'Trust'
-http_auth_type = 'Trust'
+listen_pg_addr = 'localhost:64000'
+listen_http_addr = 'localhost:9898'
+auth_type = 'Trust'
 
 [[safekeepers]]
-id = 1
+name = 'single'
 pg_port = 5454
 http_port = 7676
-
-[broker]
-listen_addr = '127.0.0.1:50051'

control_plane/src/background_process.rs

@@ -1,337 +0,0 @@
-//! Spawns and kills background processes that are needed by Neon CLI.
-//! Applies common set-up such as log and pid files (if needed) to every process.
-//!
-//! Neon CLI does not run in background, so it needs to store the information about
-//! spawned processes, which it does in this module.
-//! We do that by storing the pid of the process in the "${process_name}.pid" file.
-//! The pid file can be created by the process itself
-//! (Neon storage binaries do that and also ensure that a lock is taken onto that file)
-//! or we create such file after starting the process
-//! (non-Neon binaries don't necessarily follow our pidfile conventions).
-//! The pid stored in the file is later used to stop the service.
-//!
-//! See [`lock_file`] module for more info.
-
-use std::ffi::OsStr;
-use std::io::Write;
-use std::os::unix::prelude::AsRawFd;
-use std::os::unix::process::CommandExt;
-use std::path::{Path, PathBuf};
-use std::process::{Child, Command};
-use std::time::Duration;
-use std::{fs, io, thread};
-
-use anyhow::Context;
-use nix::errno::Errno;
-use nix::fcntl::{FcntlArg, FdFlag};
-use nix::sys::signal::{kill, Signal};
-use nix::unistd::Pid;
-use utils::pid_file::{self, PidFileRead};
-
-// These constants control the loop used to poll for process start / stop.
-//
-// The loop waits for at most 10 seconds, polling every 100 ms.
-// Once a second, it prints a dot ("."), to give the user an indication that
-// it's waiting. If the process hasn't started/stopped after 5 seconds,
-// it prints a notice that it's taking long, but keeps waiting.
-//
-const RETRY_UNTIL_SECS: u64 = 10;
-const RETRIES: u64 = (RETRY_UNTIL_SECS * 1000) / RETRY_INTERVAL_MILLIS;
-const RETRY_INTERVAL_MILLIS: u64 = 100;
-const DOT_EVERY_RETRIES: u64 = 10;
-const NOTICE_AFTER_RETRIES: u64 = 50;
-
-/// Argument to `start_process`, to indicate whether it should create pidfile or if the process creates
-/// it itself.
-pub enum InitialPidFile<'t> {
-    /// Create a pidfile, to allow future CLI invocations to manipulate the process.
-    Create(&'t Path),
-    /// The process will create the pidfile itself, need to wait for that event.
-    Expect(&'t Path),
-}
-
-/// Start a background child process using the parameters given.
-pub fn start_process<F, AI, A, EI>(
-    process_name: &str,
-    datadir: &Path,
-    command: &Path,
-    args: AI,
-    envs: EI,
-    initial_pid_file: InitialPidFile,
-    process_status_check: F,
-) -> anyhow::Result<Child>
-where
-    F: Fn() -> anyhow::Result<bool>,
-    AI: IntoIterator<Item = A>,
-    A: AsRef<OsStr>,
-    // Not generic AsRef<OsStr>, otherwise empty `envs` prevents type inference
-    EI: IntoIterator<Item = (String, String)>,
-{
-    let log_path = datadir.join(format!("{process_name}.log"));
-    let process_log_file = fs::OpenOptions::new()
-        .create(true)
-        .write(true)
-        .append(true)
-        .open(&log_path)
-        .with_context(|| {
-            format!("Could not open {process_name} log file {log_path:?} for writing")
-        })?;
-    let same_file_for_stderr = process_log_file.try_clone().with_context(|| {
-        format!("Could not reuse {process_name} log file {log_path:?} for writing stderr")
-    })?;
-
-    let mut command = Command::new(command);
-    let background_command = command
-        .stdout(process_log_file)
-        .stderr(same_file_for_stderr)
-        .args(args);
-    let filled_cmd = fill_aws_secrets_vars(fill_rust_env_vars(background_command));
-    filled_cmd.envs(envs);
-
-    let pid_file_to_check = match initial_pid_file {
-        InitialPidFile::Create(path) => {
-            pre_exec_create_pidfile(filled_cmd, path);
-            path
-        }
-        InitialPidFile::Expect(path) => path,
-    };
-
-    let mut spawned_process = filled_cmd.spawn().with_context(|| {
-        format!("Could not spawn {process_name}, see console output and log files for details.")
-    })?;
-    let pid = spawned_process.id();
-    let pid = Pid::from_raw(
-        i32::try_from(pid)
-            .with_context(|| format!("Subprocess {process_name} has invalid pid {pid}"))?,
-    );
-
-    for retries in 0..RETRIES {
-        match process_started(pid, Some(pid_file_to_check), &process_status_check) {
-            Ok(true) => {
-                println!("\n{process_name} started, pid: {pid}");
-                return Ok(spawned_process);
-            }
-            Ok(false) => {
-                if retries == NOTICE_AFTER_RETRIES {
-                    // The process is taking a long time to start up. Keep waiting, but
-                    // print a message
-                    print!("\n{process_name} has not started yet, continuing to wait");
-                }
-                if retries % DOT_EVERY_RETRIES == 0 {
-                    print!(".");
-                    io::stdout().flush().unwrap();
-                }
-                thread::sleep(Duration::from_millis(RETRY_INTERVAL_MILLIS));
-            }
-            Err(e) => {
-                println!("{process_name} failed to start: {e:#}");
-                if let Err(e) = spawned_process.kill() {
-                    println!("Could not stop {process_name} subprocess: {e:#}")
-                };
-                return Err(e);
-            }
-        }
-    }
-    println!();
-    anyhow::bail!("{process_name} did not start in {RETRY_UNTIL_SECS} seconds");
-}
-
-/// Stops the process, using the pid file given. Returns Ok also if the process is already not running.
-pub fn stop_process(immediate: bool, process_name: &str, pid_file: &Path) -> anyhow::Result<()> {
-    let pid = match pid_file::read(pid_file)
-        .with_context(|| format!("read pid_file {pid_file:?}"))?
-    {
-        PidFileRead::NotExist => {
-            println!("{process_name} is already stopped: no pid file present at {pid_file:?}");
-            return Ok(());
-        }
-        PidFileRead::NotHeldByAnyProcess(_) => {
-            // Don't try to kill according to file contents beacuse the pid might have been re-used by another process.
-            // Don't delete the file either, it can race with new pid file creation.
-            // Read `pid_file` module comment for details.
-            println!(
-                "No process is holding the pidfile. The process must have already exited. Leave in place to avoid race conditions: {pid_file:?}"
-            );
-            return Ok(());
-        }
-        PidFileRead::LockedByOtherProcess(pid) => pid,
-    };
-    // XXX the pid could become invalid (and recycled) at any time before the kill() below.
-
-    // send signal
-    let sig = if immediate {
-        print!("Stopping {process_name} with pid {pid} immediately..");
-        Signal::SIGQUIT
-    } else {
-        print!("Stopping {process_name} with pid {pid} gracefully..");
-        Signal::SIGTERM
-    };
-    io::stdout().flush().unwrap();
-    match kill(pid, sig) {
-        Ok(()) => (),
-        Err(Errno::ESRCH) => {
-            // Again, don't delete the pid file. The unlink can race with a new pid file being created.
-            println!(
-                "{process_name} with pid {pid} does not exist, but a pid file {pid_file:?} was found. Likely the pid got recycled. Lucky we didn't harm anyone."
-            );
-            return Ok(());
-        }
-        Err(e) => anyhow::bail!("Failed to send signal to {process_name} with pid {pid}: {e}"),
-    }
-
-    // Wait until process is gone
-    for retries in 0..RETRIES {
-        match process_has_stopped(pid) {
-            Ok(true) => {
-                println!("\n{process_name} stopped");
-                return Ok(());
-            }
-            Ok(false) => {
-                if retries == NOTICE_AFTER_RETRIES {
-                    // The process is taking a long time to start up. Keep waiting, but
-                    // print a message
-                    print!("\n{process_name} has not stopped yet, continuing to wait");
-                }
-                if retries % DOT_EVERY_RETRIES == 0 {
-                    print!(".");
-                    io::stdout().flush().unwrap();
-                }
-                thread::sleep(Duration::from_millis(RETRY_INTERVAL_MILLIS));
-            }
-            Err(e) => {
-                println!("{process_name} with pid {pid} failed to stop: {e:#}");
-                return Err(e);
-            }
-        }
-    }
-    println!();
-    anyhow::bail!("{process_name} with pid {pid} did not stop in {RETRY_UNTIL_SECS} seconds");
-}
-
-fn fill_rust_env_vars(cmd: &mut Command) -> &mut Command {
-    // If RUST_BACKTRACE is set, pass it through. But if it's not set, default
-    // to RUST_BACKTRACE=1.
-    let backtrace_setting = std::env::var_os("RUST_BACKTRACE");
-    let backtrace_setting = backtrace_setting
-        .as_deref()
-        .unwrap_or_else(|| OsStr::new("1"));
-
-    let mut filled_cmd = cmd.env_clear().env("RUST_BACKTRACE", backtrace_setting);
-
-    // Pass through these environment variables to the command
-    for var in ["LLVM_PROFILE_FILE", "FAILPOINTS", "RUST_LOG"] {
-        if let Some(val) = std::env::var_os(var) {
-            filled_cmd = filled_cmd.env(var, val);
-        }
-    }
-
-    filled_cmd
-}
-
-fn fill_aws_secrets_vars(mut cmd: &mut Command) -> &mut Command {
-    for env_key in [
-        "AWS_ACCESS_KEY_ID",
-        "AWS_SECRET_ACCESS_KEY",
-        "AWS_SESSION_TOKEN",
-    ] {
-        if let Ok(value) = std::env::var(env_key) {
-            cmd = cmd.env(env_key, value);
-        }
-    }
-    cmd
-}
-
-/// Add a `pre_exec` to the cmd that, inbetween fork() and exec(),
-/// 1. Claims a pidfile with a fcntl lock on it and
-/// 2. Sets up the pidfile's file descriptor so that it (and the lock)
-///    will remain held until the cmd exits.
-fn pre_exec_create_pidfile<P>(cmd: &mut Command, path: P) -> &mut Command
-where
-    P: Into<PathBuf>,
-{
-    let path: PathBuf = path.into();
-    // SAFETY
-    // pre_exec is marked unsafe because it runs between fork and exec.
-    // Why is that dangerous in various ways?
-    // Long answer:  https://github.com/rust-lang/rust/issues/39575
-    // Short answer: in a multi-threaded program, other threads may have
-    // been inside of critical sections at the time of fork. In the
-    // original process, that was allright, assuming they protected
-    // the critical sections appropriately, e.g., through locks.
-    // Fork adds another process to the mix that
-    //   1. Has a single thread T
-    //   2. In an exact copy of the address space at the time of fork.
-    // A variety of problems scan occur now:
-    //   1. T tries to grab a lock that was locked at the time of fork.
-    //      It will wait forever since in its address space, the lock
-    //      is in state 'taken' but the thread that would unlock it is
-    //      not there.
-    //   2. A rust object that represented some external resource in the
-    //      parent now got implicitly copied by the the fork, even though
-    //      the object's type is not `Copy`. The parent program may use
-    //      non-copyability as way to enforce unique ownership of an
-    //      external resource in the typesystem. The fork breaks that
-    //      assumption, as now both parent and child process have an
-    //      owned instance of the object that represents the same
-    //      underlying resource.
-    // While these seem like niche problems, (1) in particular is
-    // highly relevant. For example, `malloc()` may grab a mutex internally,
-    // and so, if we forked while another thread was mallocing' and our
-    // pre_exec closure allocates as well, it will block on the malloc
-    // mutex forever
-    //
-    // The proper solution is to only use C library functions that are marked
-    // "async-signal-safe": https://man7.org/linux/man-pages/man7/signal-safety.7.html
-    //
-    // With this specific pre_exec() closure, the non-error path doesn't allocate.
-    // The error path uses `anyhow`, and hence does allocate.
-    // We take our chances there, hoping that any potential disaster is constrained
-    // to the child process (e.g., malloc has no state ourside of the child process).
-    // Last, `expect` prints to stderr, and stdio is not async-signal-safe.
-    // Again, we take our chances, making the same assumptions as for malloc.
-    unsafe {
-        cmd.pre_exec(move || {
-            let file = pid_file::claim_for_current_process(&path).expect("claim pid file");
-            // Remove the FD_CLOEXEC flag on the pidfile descriptor so that the pidfile
-            // remains locked after exec.
-            nix::fcntl::fcntl(file.as_raw_fd(), FcntlArg::F_SETFD(FdFlag::empty()))
-                .expect("remove FD_CLOEXEC");
-            // Don't run drop(file), it would close the file before we actually exec.
-            std::mem::forget(file);
-            Ok(())
-        });
-    }
-    cmd
-}
-
-fn process_started<F>(
-    pid: Pid,
-    pid_file_to_check: Option<&Path>,
-    status_check: &F,
-) -> anyhow::Result<bool>
-where
-    F: Fn() -> anyhow::Result<bool>,
-{
-    match status_check() {
-        Ok(true) => match pid_file_to_check {
-            Some(pid_file_path) => match pid_file::read(pid_file_path)? {
-                PidFileRead::NotExist => Ok(false),
-                PidFileRead::LockedByOtherProcess(pid_in_file) => Ok(pid_in_file == pid),
-                PidFileRead::NotHeldByAnyProcess(_) => Ok(false),
-            },
-            None => Ok(true),
-        },
-        Ok(false) => Ok(false),
-        Err(e) => anyhow::bail!("process failed to start: {e}"),
-    }
-}
-
-fn process_has_stopped(pid: Pid) -> anyhow::Result<bool> {
-    match kill(pid, None) {
-        // Process exists, keep waiting
-        Ok(_) => Ok(false),
-        // Process not found, we're done
-        Err(Errno::ESRCH) => Ok(true),
-        Err(err) => anyhow::bail!("Failed to send signal to process with pid {pid}: {err}"),
-    }
-}

control_plane/src/broker.rs

@@ -1,54 +0,0 @@
-//! Code to manage the storage broker
-//!
-//! In the local test environment, the data for each safekeeper is stored in
-//!
-//!   .neon/safekeepers/<safekeeper id>
-//!
-use anyhow::Context;
-
-use std::path::PathBuf;
-
-use crate::{background_process, local_env};
-
-pub fn start_broker_process(env: &local_env::LocalEnv) -> anyhow::Result<()> {
-    let broker = &env.broker;
-    let listen_addr = &broker.listen_addr;
-
-    print!("Starting neon broker at {}", listen_addr);
-
-    let args = [format!("--listen-addr={listen_addr}")];
-
-    let client = reqwest::blocking::Client::new();
-    background_process::start_process(
-        "storage_broker",
-        &env.base_data_dir,
-        &env.storage_broker_bin(),
-        args,
-        [],
-        background_process::InitialPidFile::Create(&storage_broker_pid_file_path(env)),
-        || {
-            let url = broker.client_url();
-            let status_url = url.join("status").with_context(|| {
-                format!("Failed to append /status path to broker endpoint {url}",)
-            })?;
-            let request = client
-                .get(status_url)
-                .build()
-                .with_context(|| format!("Failed to construct request to broker endpoint {url}"))?;
-            match client.execute(request) {
-                Ok(resp) => Ok(resp.status().is_success()),
-                Err(_) => Ok(false),
-            }
-        },
-    )
-    .context("Failed to spawn storage_broker subprocess")?;
-    Ok(())
-}
-
-pub fn stop_broker_process(env: &local_env::LocalEnv) -> anyhow::Result<()> {
-    background_process::stop_process(true, "storage_broker", &storage_broker_pid_file_path(env))
-}
-
-fn storage_broker_pid_file_path(env: &local_env::LocalEnv) -> PathBuf {
-    env.base_data_dir.join("storage_broker.pid")
-}

control_plane/src/compute.rs

@@ -0,0 +1,543 @@
+use std::collections::BTreeMap;
+use std::fs::{self, File};
+use std::io::Write;
+use std::net::SocketAddr;
+use std::net::TcpStream;
+use std::os::unix::fs::PermissionsExt;
+use std::path::PathBuf;
+use std::process::{Command, Stdio};
+use std::str::FromStr;
+use std::sync::Arc;
+use std::time::Duration;
+
+use anyhow::{Context, Result};
+use zenith_utils::connstring::connection_host_port;
+use zenith_utils::lsn::Lsn;
+use zenith_utils::postgres_backend::AuthType;
+use zenith_utils::zid::ZTenantId;
+use zenith_utils::zid::ZTimelineId;
+
+use crate::local_env::LocalEnv;
+use crate::postgresql_conf::PostgresConf;
+use crate::storage::PageServerNode;
+
+//
+// ComputeControlPlane
+//
+pub struct ComputeControlPlane {
+    base_port: u16,
+    pageserver: Arc<PageServerNode>,
+    pub nodes: BTreeMap<(ZTenantId, String), Arc<PostgresNode>>,
+    env: LocalEnv,
+}
+
+impl ComputeControlPlane {
+    // Load current nodes with ports from data directories on disk
+    // Directory structure has the following layout:
+    // pgdatadirs
+    // |- tenants
+    // |  |- <tenant_id>
+    // |  |   |- <branch name>
+    pub fn load(env: LocalEnv) -> Result<ComputeControlPlane> {
+        let pageserver = Arc::new(PageServerNode::from_env(&env));
+
+        let mut nodes = BTreeMap::default();
+        let pgdatadirspath = &env.pg_data_dirs_path();
+
+        for tenant_dir in fs::read_dir(&pgdatadirspath)
+            .with_context(|| format!("failed to list {}", pgdatadirspath.display()))?
+        {
+            let tenant_dir = tenant_dir?;
+            for timeline_dir in fs::read_dir(tenant_dir.path())
+                .with_context(|| format!("failed to list {}", tenant_dir.path().display()))?
+            {
+                let node = PostgresNode::from_dir_entry(timeline_dir?, &env, &pageserver)?;
+                nodes.insert((node.tenantid, node.name.clone()), Arc::new(node));
+            }
+        }
+
+        Ok(ComputeControlPlane {
+            base_port: 55431,
+            pageserver,
+            nodes,
+            env,
+        })
+    }
+
+    fn get_port(&mut self) -> u16 {
+        1 + self
+            .nodes
+            .iter()
+            .map(|(_name, node)| node.address.port())
+            .max()
+            .unwrap_or(self.base_port)
+    }
+
+    // FIXME: see also parse_point_in_time in branches.rs.
+    fn parse_point_in_time(
+        &self,
+        tenantid: ZTenantId,
+        s: &str,
+    ) -> Result<(ZTimelineId, Option<Lsn>)> {
+        let mut strings = s.split('@');
+        let name = strings.next().unwrap();
+
+        let lsn: Option<Lsn>;
+        if let Some(lsnstr) = strings.next() {
+            lsn = Some(
+                Lsn::from_str(lsnstr)
+                    .with_context(|| "invalid LSN in point-in-time specification")?,
+            );
+        } else {
+            lsn = None
+        }
+
+        // Resolve the timeline ID, given the human-readable branch name
+        let timeline_id = self
+            .pageserver
+            .branch_get_by_name(&tenantid, name)?
+            .timeline_id;
+
+        Ok((timeline_id, lsn))
+    }
+
+    pub fn new_node(
+        &mut self,
+        tenantid: ZTenantId,
+        name: &str,
+        timeline_spec: &str,
+        port: Option<u16>,
+    ) -> Result<Arc<PostgresNode>> {
+        // Resolve the human-readable timeline spec into timeline ID and LSN
+        let (timelineid, lsn) = self.parse_point_in_time(tenantid, timeline_spec)?;
+
+        let port = port.unwrap_or_else(|| self.get_port());
+        let node = Arc::new(PostgresNode {
+            name: name.to_owned(),
+            address: SocketAddr::new("127.0.0.1".parse().unwrap(), port),
+            env: self.env.clone(),
+            pageserver: Arc::clone(&self.pageserver),
+            is_test: false,
+            timelineid,
+            lsn,
+            tenantid,
+            uses_wal_proposer: false,
+        });
+
+        node.create_pgdata()?;
+        node.setup_pg_conf(self.env.pageserver.auth_type)?;
+
+        self.nodes
+            .insert((tenantid, node.name.clone()), Arc::clone(&node));
+
+        Ok(node)
+    }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+
+#[derive(Debug)]
+pub struct PostgresNode {
+    pub address: SocketAddr,
+    name: String,
+    pub env: LocalEnv,
+    pageserver: Arc<PageServerNode>,
+    is_test: bool,
+    pub timelineid: ZTimelineId,
+    pub lsn: Option<Lsn>, // if it's a read-only node. None for primary
+    pub tenantid: ZTenantId,
+    uses_wal_proposer: bool,
+}
+
+impl PostgresNode {
+    fn from_dir_entry(
+        entry: std::fs::DirEntry,
+        env: &LocalEnv,
+        pageserver: &Arc<PageServerNode>,
+    ) -> Result<PostgresNode> {
+        if !entry.file_type()?.is_dir() {
+            anyhow::bail!(
+                "PostgresNode::from_dir_entry failed: '{}' is not a directory",
+                entry.path().display()
+            );
+        }
+
+        // parse data directory name
+        let fname = entry.file_name();
+        let name = fname.to_str().unwrap().to_string();
+
+        // Read config file into memory
+        let cfg_path = entry.path().join("postgresql.conf");
+        let cfg_path_str = cfg_path.to_string_lossy();
+        let mut conf_file = File::open(&cfg_path)
+            .with_context(|| format!("failed to open config file in {}", cfg_path_str))?;
+        let conf = PostgresConf::read(&mut conf_file)
+            .with_context(|| format!("failed to read config file in {}", cfg_path_str))?;
+
+        // Read a few options from the config file
+        let context = format!("in config file {}", cfg_path_str);
+        let port: u16 = conf.parse_field("port", &context)?;
+        let timelineid: ZTimelineId = conf.parse_field("zenith.zenith_timeline", &context)?;
+        let tenantid: ZTenantId = conf.parse_field("zenith.zenith_tenant", &context)?;
+        let uses_wal_proposer = conf.get("wal_acceptors").is_some();
+
+        // parse recovery_target_lsn, if any
+        let recovery_target_lsn: Option<Lsn> =
+            conf.parse_field_optional("recovery_target_lsn", &context)?;
+
+        // ok now
+        Ok(PostgresNode {
+            address: SocketAddr::new("127.0.0.1".parse().unwrap(), port),
+            name,
+            env: env.clone(),
+            pageserver: Arc::clone(pageserver),
+            is_test: false,
+            timelineid,
+            lsn: recovery_target_lsn,
+            tenantid,
+            uses_wal_proposer,
+        })
+    }
+
+    fn sync_safekeepers(&self, auth_token: &Option<String>) -> Result<Lsn> {
+        let pg_path = self.env.pg_bin_dir().join("postgres");
+        let mut cmd = Command::new(&pg_path);
+
+        cmd.arg("--sync-safekeepers")
+            .env_clear()
+            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .env("PGDATA", self.pgdata().to_str().unwrap())
+            .stdout(Stdio::piped())
+            // Comment this to avoid capturing stderr (useful if command hangs)
+            .stderr(Stdio::piped());
+
+        if let Some(token) = auth_token {
+            cmd.env("ZENITH_AUTH_TOKEN", token);
+        }
+
+        let sync_handle = cmd
+            .spawn()
+            .expect("postgres --sync-safekeepers failed to start");
+
+        let sync_output = sync_handle
+            .wait_with_output()
+            .expect("postgres --sync-safekeepers failed");
+        if !sync_output.status.success() {
+            anyhow::bail!(
+                "sync-safekeepers failed: '{}'",
+                String::from_utf8_lossy(&sync_output.stderr)
+            );
+        }
+
+        let lsn = Lsn::from_str(std::str::from_utf8(&sync_output.stdout)?.trim())?;
+        println!("Safekeepers synced on {}", lsn);
+        Ok(lsn)
+    }
+
+    /// Get basebackup from the pageserver as a tar archive and extract it
+    /// to the `self.pgdata()` directory.
+    fn do_basebackup(&self, lsn: Option<Lsn>) -> Result<()> {
+        println!(
+            "Extracting base backup to create postgres instance: path={} port={}",
+            self.pgdata().display(),
+            self.address.port()
+        );
+
+        let sql = if let Some(lsn) = lsn {
+            format!("basebackup {} {} {}", self.tenantid, self.timelineid, lsn)
+        } else {
+            format!("basebackup {} {}", self.tenantid, self.timelineid)
+        };
+
+        let mut client = self
+            .pageserver
+            .page_server_psql_client()
+            .with_context(|| "connecting to page server failed")?;
+
+        let copyreader = client
+            .copy_out(sql.as_str())
+            .with_context(|| "page server 'basebackup' command failed")?;
+
+        // Read the archive directly from the `CopyOutReader`
+        tar::Archive::new(copyreader)
+            .unpack(&self.pgdata())
+            .with_context(|| "extracting base backup failed")?;
+
+        Ok(())
+    }
+
+    fn create_pgdata(&self) -> Result<()> {
+        fs::create_dir_all(&self.pgdata()).with_context(|| {
+            format!(
+                "could not create data directory {}",
+                self.pgdata().display()
+            )
+        })?;
+        fs::set_permissions(self.pgdata().as_path(), fs::Permissions::from_mode(0o700))
+            .with_context(|| {
+                format!(
+                    "could not set permissions in data directory {}",
+                    self.pgdata().display()
+                )
+            })
+    }
+
+    // Connect to a page server, get base backup, and untar it to initialize a
+    // new data directory
+    fn setup_pg_conf(&self, auth_type: AuthType) -> Result<()> {
+        let mut conf = PostgresConf::new();
+        conf.append("max_wal_senders", "10");
+        // wal_log_hints is mandatory when running against pageserver (see gh issue#192)
+        // TODO: is it possible to check wal_log_hints at pageserver side via XLOG_PARAMETER_CHANGE?
+        conf.append("wal_log_hints", "on");
+        conf.append("max_replication_slots", "10");
+        conf.append("hot_standby", "on");
+        conf.append("shared_buffers", "1MB");
+        conf.append("fsync", "off");
+        conf.append("max_connections", "100");
+        conf.append("wal_level", "replica");
+        // wal_sender_timeout is the maximum time to wait for WAL replication.
+        // It also defines how often the walreciever will send a feedback message to the wal sender.
+        conf.append("wal_sender_timeout", "5s");
+        conf.append("listen_addresses", &self.address.ip().to_string());
+        conf.append("port", &self.address.port().to_string());
+
+        // Never clean up old WAL. TODO: We should use a replication
+        // slot or something proper, to prevent the compute node
+        // from removing WAL that hasn't been streamed to the safekeeper or
+        // page server yet. (gh issue #349)
+        conf.append("wal_keep_size", "10TB");
+
+        // Configure the node to fetch pages from pageserver
+        let pageserver_connstr = {
+            let (host, port) = connection_host_port(&self.pageserver.pg_connection_config);
+
+            // Set up authentication
+            //
+            // $ZENITH_AUTH_TOKEN will be replaced with value from environment
+            // variable during compute pg startup. It is done this way because
+            // otherwise user will be able to retrieve the value using SHOW
+            // command or pg_settings
+            let password = if let AuthType::ZenithJWT = auth_type {
+                "$ZENITH_AUTH_TOKEN"
+            } else {
+                ""
+            };
+            // NOTE avoiding spaces in connection string, because it is less error prone if we forward it somewhere.
+            // Also note that not all parameters are supported here. Because in compute we substitute $ZENITH_AUTH_TOKEN
+            // We parse this string and build it back with token from env var, and for simplicity rebuild
+            // uses only needed variables namely host, port, user, password.
+            format!("postgresql://no_user:{}@{}:{}", password, host, port)
+        };
+        conf.append("shared_preload_libraries", "zenith");
+        conf.append_line("");
+        conf.append("zenith.page_server_connstring", &pageserver_connstr);
+        conf.append("zenith.zenith_tenant", &self.tenantid.to_string());
+        conf.append("zenith.zenith_timeline", &self.timelineid.to_string());
+        if let Some(lsn) = self.lsn {
+            conf.append("recovery_target_lsn", &lsn.to_string());
+        }
+        conf.append_line("");
+
+        if !self.env.safekeepers.is_empty() {
+            // Configure backpressure
+            // In setup with safekeepers apply_lag depends on
+            // speed of data checkpointing on pageserver (see disk_consistent_lsn).
+            conf.append("max_replication_apply_lag", "1500MB");
+
+            // Configure the node to connect to the safekeepers
+            conf.append("synchronous_standby_names", "walproposer");
+
+            let wal_acceptors = self
+                .env
+                .safekeepers
+                .iter()
+                .map(|sk| format!("localhost:{}", sk.pg_port))
+                .collect::<Vec<String>>()
+                .join(",");
+            conf.append("wal_acceptors", &wal_acceptors);
+        } else {
+            // Configure backpressure
+            // In setup without safekeepers, flush_lag depends on
+            // speed of of data checkpointing on pageserver (see disk_consistent_lsn)
+            conf.append("max_replication_flush_lag", "1500MB");
+
+            // We only use setup without safekeepers for tests,
+            // and don't care about data durability on pageserver,
+            // so set more relaxed synchronous_commit.
+            conf.append("synchronous_commit", "remote_write");
+
+            // Configure the node to stream WAL directly to the pageserver
+            // This isn't really a supported configuration, but can be useful for
+            // testing.
+            conf.append("synchronous_standby_names", "pageserver");
+            conf.append("zenith.callmemaybe_connstring", &self.connstr());
+        }
+
+        let mut file = File::create(self.pgdata().join("postgresql.conf"))?;
+        file.write_all(conf.to_string().as_bytes())?;
+
+        Ok(())
+    }
+
+    fn load_basebackup(&self, auth_token: &Option<String>) -> Result<()> {
+        let backup_lsn = if let Some(lsn) = self.lsn {
+            Some(lsn)
+        } else if self.uses_wal_proposer {
+            // LSN 0 means that it is bootstrap and we need to download just
+            // latest data from the pageserver. That is a bit clumsy but whole bootstrap
+            // procedure evolves quite actively right now, so let's think about it again
+            // when things would be more stable (TODO).
+            let lsn = self.sync_safekeepers(auth_token)?;
+            if lsn == Lsn(0) {
+                None
+            } else {
+                Some(lsn)
+            }
+        } else {
+            None
+        };
+
+        self.do_basebackup(backup_lsn)?;
+
+        Ok(())
+    }
+
+    pub fn pgdata(&self) -> PathBuf {
+        self.env.pg_data_dir(&self.tenantid, &self.name)
+    }
+
+    pub fn status(&self) -> &str {
+        let timeout = Duration::from_millis(300);
+        let has_pidfile = self.pgdata().join("postmaster.pid").exists();
+        let can_connect = TcpStream::connect_timeout(&self.address, timeout).is_ok();
+
+        match (has_pidfile, can_connect) {
+            (true, true) => "running",
+            (false, false) => "stopped",
+            (true, false) => "crashed",
+            (false, true) => "running, no pidfile",
+        }
+    }
+
+    fn pg_ctl(&self, args: &[&str], auth_token: &Option<String>) -> Result<()> {
+        let pg_ctl_path = self.env.pg_bin_dir().join("pg_ctl");
+        let mut cmd = Command::new(pg_ctl_path);
+        cmd.args(
+            [
+                &[
+                    "-D",
+                    self.pgdata().to_str().unwrap(),
+                    "-l",
+                    self.pgdata().join("pg.log").to_str().unwrap(),
+                    "-w", //wait till pg_ctl actually does what was asked
+                ],
+                args,
+            ]
+            .concat(),
+        )
+        .env_clear()
+        .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+        .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap());
+        if let Some(token) = auth_token {
+            cmd.env("ZENITH_AUTH_TOKEN", token);
+        }
+        let pg_ctl = cmd.status().with_context(|| "pg_ctl failed")?;
+
+        if !pg_ctl.success() {
+            anyhow::bail!("pg_ctl failed");
+        }
+        Ok(())
+    }
+
+    pub fn start(&self, auth_token: &Option<String>) -> Result<()> {
+        // Bail if the node already running.
+        if self.status() == "running" {
+            anyhow::bail!("The node is already running");
+        }
+
+        // 1. We always start compute node from scratch, so
+        // if old dir exists, preserve 'postgresql.conf' and drop the directory
+        let postgresql_conf_path = self.pgdata().join("postgresql.conf");
+        let postgresql_conf = fs::read(&postgresql_conf_path).with_context(|| {
+            format!(
+                "failed to read config file in {}",
+                postgresql_conf_path.to_str().unwrap()
+            )
+        })?;
+        fs::remove_dir_all(&self.pgdata())?;
+        self.create_pgdata()?;
+
+        // 2. Bring back config files
+        fs::write(&postgresql_conf_path, postgresql_conf)?;
+
+        // 3. Load basebackup
+        self.load_basebackup(auth_token)?;
+
+        if self.lsn.is_some() {
+            File::create(self.pgdata().join("standby.signal"))?;
+        }
+
+        // 4. Finally start the compute node postgres
+        println!("Starting postgres node at '{}'", self.connstr());
+        self.pg_ctl(&["start"], auth_token)
+    }
+
+    pub fn restart(&self, auth_token: &Option<String>) -> Result<()> {
+        self.pg_ctl(&["restart"], auth_token)
+    }
+
+    pub fn stop(&self, destroy: bool) -> Result<()> {
+        // If we are going to destroy data directory,
+        // use immediate shutdown mode, otherwise,
+        // shutdown gracefully to leave the data directory sane.
+        //
+        // Compute node always starts from scratch, so stop
+        // without destroy only used for testing and debugging.
+        //
+        if destroy {
+            self.pg_ctl(&["-m", "immediate", "stop"], &None)?;
+            println!(
+                "Destroying postgres data directory '{}'",
+                self.pgdata().to_str().unwrap()
+            );
+            fs::remove_dir_all(&self.pgdata())?;
+        } else {
+            self.pg_ctl(&["stop"], &None)?;
+        }
+        Ok(())
+    }
+
+    pub fn connstr(&self) -> String {
+        format!(
+            "host={} port={} user={} dbname={}",
+            self.address.ip(),
+            self.address.port(),
+            "zenith_admin",
+            "postgres"
+        )
+    }
+
+    // XXX: cache that in control plane
+    pub fn whoami(&self) -> String {
+        let output = Command::new("whoami")
+            .output()
+            .expect("failed to execute whoami");
+
+        assert!(output.status.success(), "whoami failed");
+
+        String::from_utf8(output.stdout).unwrap().trim().to_string()
+    }
+}
+
+impl Drop for PostgresNode {
+    // destructor to clean up state after test is done
+    // XXX: we may detect failed test by setting some flag in catch_unwind()
+    // and checking it here. But let just clean datadirs on start.
+    fn drop(&mut self) {
+        if self.is_test {
+            let _ = self.stop(true);
+        }
+    }
+}

control_plane/src/endpoint.rs

@@ -1,614 +0,0 @@
-//! Code to manage compute endpoints
-//!
-//! In the local test environment, the data for each endpoint is stored in
-//!
-//!   .neon/endpoints/<endpoint id>
-//!
-//! Some basic information about the endpoint, like the tenant and timeline IDs,
-//! are stored in the `endpoint.json` file. The `endpoint.json` file is created
-//! when the endpoint is created, and doesn't change afterwards.
-//!
-//! The endpoint is managed by the `compute_ctl` binary. When an endpoint is
-//! started, we launch `compute_ctl` It synchronizes the safekeepers, downloads
-//! the basebackup from the pageserver to initialize the the data directory, and
-//! finally launches the PostgreSQL process. It watches the PostgreSQL process
-//! until it exits.
-//!
-//! When an endpoint is created, a `postgresql.conf` file is also created in
-//! the endpoint's directory. The file can be modified before starting PostgreSQL.
-//! However, the `postgresql.conf` file in the endpoint directory is not used directly
-//! by PostgreSQL. It is passed to `compute_ctl`, and `compute_ctl` writes another
-//! copy of it in the data directory.
-//!
-//! Directory contents:
-//!
-//! ```ignore
-//! .neon/endpoints/main/
-//!     compute.log               - log output of `compute_ctl` and `postgres`
-//!     endpoint.json             - serialized `EndpointConf` struct
-//!     postgresql.conf           - postgresql settings
-//!     spec.json                 - passed to `compute_ctl`
-//!     pgdata/
-//!         postgresql.conf       - copy of postgresql.conf created by `compute_ctl`
-//!         zenith.signal
-//!         <other PostgreSQL files>
-//! ```
-//!
-use std::collections::BTreeMap;
-use std::net::SocketAddr;
-use std::net::TcpStream;
-use std::path::PathBuf;
-use std::process::Command;
-use std::sync::Arc;
-use std::time::Duration;
-
-use anyhow::{anyhow, bail, Context, Result};
-use serde::{Deserialize, Serialize};
-use serde_with::{serde_as, DisplayFromStr};
-use utils::id::{NodeId, TenantId, TimelineId};
-
-use crate::local_env::LocalEnv;
-use crate::pageserver::PageServerNode;
-use crate::postgresql_conf::PostgresConf;
-
-use compute_api::responses::{ComputeState, ComputeStatus};
-use compute_api::spec::{Cluster, ComputeMode, ComputeSpec};
-
-// contents of a endpoint.json file
-#[serde_as]
-#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
-pub struct EndpointConf {
-    endpoint_id: String,
-    #[serde_as(as = "DisplayFromStr")]
-    tenant_id: TenantId,
-    #[serde_as(as = "DisplayFromStr")]
-    timeline_id: TimelineId,
-    mode: ComputeMode,
-    pg_port: u16,
-    http_port: u16,
-    pg_version: u32,
-}
-
-//
-// ComputeControlPlane
-//
-pub struct ComputeControlPlane {
-    base_port: u16,
-
-    // endpoint ID is the key
-    pub endpoints: BTreeMap<String, Arc<Endpoint>>,
-
-    env: LocalEnv,
-    pageserver: Arc<PageServerNode>,
-}
-
-impl ComputeControlPlane {
-    // Load current endpoints from the endpoints/ subdirectories
-    pub fn load(env: LocalEnv) -> Result<ComputeControlPlane> {
-        let pageserver = Arc::new(PageServerNode::from_env(&env));
-
-        let mut endpoints = BTreeMap::default();
-        for endpoint_dir in std::fs::read_dir(env.endpoints_path())
-            .with_context(|| format!("failed to list {}", env.endpoints_path().display()))?
-        {
-            let ep = Endpoint::from_dir_entry(endpoint_dir?, &env, &pageserver)?;
-            endpoints.insert(ep.endpoint_id.clone(), Arc::new(ep));
-        }
-
-        Ok(ComputeControlPlane {
-            base_port: 55431,
-            endpoints,
-            env,
-            pageserver,
-        })
-    }
-
-    fn get_port(&mut self) -> u16 {
-        1 + self
-            .endpoints
-            .values()
-            .map(|ep| std::cmp::max(ep.pg_address.port(), ep.http_address.port()))
-            .max()
-            .unwrap_or(self.base_port)
-    }
-
-    #[allow(clippy::too_many_arguments)]
-    pub fn new_endpoint(
-        &mut self,
-        endpoint_id: &str,
-        tenant_id: TenantId,
-        timeline_id: TimelineId,
-        pg_port: Option<u16>,
-        http_port: Option<u16>,
-        pg_version: u32,
-        mode: ComputeMode,
-    ) -> Result<Arc<Endpoint>> {
-        let pg_port = pg_port.unwrap_or_else(|| self.get_port());
-        let http_port = http_port.unwrap_or_else(|| self.get_port() + 1);
-        let ep = Arc::new(Endpoint {
-            endpoint_id: endpoint_id.to_owned(),
-            pg_address: SocketAddr::new("127.0.0.1".parse().unwrap(), pg_port),
-            http_address: SocketAddr::new("127.0.0.1".parse().unwrap(), http_port),
-            env: self.env.clone(),
-            pageserver: Arc::clone(&self.pageserver),
-            timeline_id,
-            mode,
-            tenant_id,
-            pg_version,
-        });
-
-        ep.create_endpoint_dir()?;
-        std::fs::write(
-            ep.endpoint_path().join("endpoint.json"),
-            serde_json::to_string_pretty(&EndpointConf {
-                endpoint_id: endpoint_id.to_string(),
-                tenant_id,
-                timeline_id,
-                mode,
-                http_port,
-                pg_port,
-                pg_version,
-            })?,
-        )?;
-        std::fs::write(
-            ep.endpoint_path().join("postgresql.conf"),
-            ep.setup_pg_conf()?.to_string(),
-        )?;
-
-        self.endpoints
-            .insert(ep.endpoint_id.clone(), Arc::clone(&ep));
-
-        Ok(ep)
-    }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-
-#[derive(Debug)]
-pub struct Endpoint {
-    /// used as the directory name
-    endpoint_id: String,
-    pub tenant_id: TenantId,
-    pub timeline_id: TimelineId,
-    pub mode: ComputeMode,
-
-    // port and address of the Postgres server and `compute_ctl`'s HTTP API
-    pub pg_address: SocketAddr,
-    pub http_address: SocketAddr,
-
-    // postgres major version in the format: 14, 15, etc.
-    pg_version: u32,
-
-    // These are not part of the endpoint as such, but the environment
-    // the endpoint runs in.
-    pub env: LocalEnv,
-    pageserver: Arc<PageServerNode>,
-}
-
-impl Endpoint {
-    fn from_dir_entry(
-        entry: std::fs::DirEntry,
-        env: &LocalEnv,
-        pageserver: &Arc<PageServerNode>,
-    ) -> Result<Endpoint> {
-        if !entry.file_type()?.is_dir() {
-            anyhow::bail!(
-                "Endpoint::from_dir_entry failed: '{}' is not a directory",
-                entry.path().display()
-            );
-        }
-
-        // parse data directory name
-        let fname = entry.file_name();
-        let endpoint_id = fname.to_str().unwrap().to_string();
-
-        // Read the endpoint.json file
-        let conf: EndpointConf =
-            serde_json::from_slice(&std::fs::read(entry.path().join("endpoint.json"))?)?;
-
-        Ok(Endpoint {
-            pg_address: SocketAddr::new("127.0.0.1".parse().unwrap(), conf.pg_port),
-            http_address: SocketAddr::new("127.0.0.1".parse().unwrap(), conf.http_port),
-            endpoint_id,
-            env: env.clone(),
-            pageserver: Arc::clone(pageserver),
-            timeline_id: conf.timeline_id,
-            mode: conf.mode,
-            tenant_id: conf.tenant_id,
-            pg_version: conf.pg_version,
-        })
-    }
-
-    fn create_endpoint_dir(&self) -> Result<()> {
-        std::fs::create_dir_all(self.endpoint_path()).with_context(|| {
-            format!(
-                "could not create endpoint directory {}",
-                self.endpoint_path().display()
-            )
-        })
-    }
-
-    // Generate postgresql.conf with default configuration
-    fn setup_pg_conf(&self) -> Result<PostgresConf> {
-        let mut conf = PostgresConf::new();
-        conf.append("max_wal_senders", "10");
-        conf.append("wal_log_hints", "off");
-        conf.append("max_replication_slots", "10");
-        conf.append("hot_standby", "on");
-        conf.append("shared_buffers", "1MB");
-        conf.append("fsync", "off");
-        conf.append("max_connections", "100");
-        conf.append("wal_level", "replica");
-        // wal_sender_timeout is the maximum time to wait for WAL replication.
-        // It also defines how often the walreciever will send a feedback message to the wal sender.
-        conf.append("wal_sender_timeout", "5s");
-        conf.append("listen_addresses", &self.pg_address.ip().to_string());
-        conf.append("port", &self.pg_address.port().to_string());
-        conf.append("wal_keep_size", "0");
-        // walproposer panics when basebackup is invalid, it is pointless to restart in this case.
-        conf.append("restart_after_crash", "off");
-
-        // Load the 'neon' extension
-        conf.append("shared_preload_libraries", "neon");
-
-        conf.append_line("");
-        // Replication-related configurations, such as WAL sending
-        match &self.mode {
-            ComputeMode::Primary => {
-                // Configure backpressure
-                // - Replication write lag depends on how fast the walreceiver can process incoming WAL.
-                //   This lag determines latency of get_page_at_lsn. Speed of applying WAL is about 10MB/sec,
-                //   so to avoid expiration of 1 minute timeout, this lag should not be larger than 600MB.
-                //   Actually latency should be much smaller (better if < 1sec). But we assume that recently
-                //   updates pages are not requested from pageserver.
-                // - Replication flush lag depends on speed of persisting data by checkpointer (creation of
-                //   delta/image layers) and advancing disk_consistent_lsn. Safekeepers are able to
-                //   remove/archive WAL only beyond disk_consistent_lsn. Too large a lag can cause long
-                //   recovery time (in case of pageserver crash) and disk space overflow at safekeepers.
-                // - Replication apply lag depends on speed of uploading changes to S3 by uploader thread.
-                //   To be able to restore database in case of pageserver node crash, safekeeper should not
-                //   remove WAL beyond this point. Too large lag can cause space exhaustion in safekeepers
-                //   (if they are not able to upload WAL to S3).
-                conf.append("max_replication_write_lag", "15MB");
-                conf.append("max_replication_flush_lag", "10GB");
-
-                if !self.env.safekeepers.is_empty() {
-                    // Configure Postgres to connect to the safekeepers
-                    conf.append("synchronous_standby_names", "walproposer");
-
-                    let safekeepers = self
-                        .env
-                        .safekeepers
-                        .iter()
-                        .map(|sk| format!("localhost:{}", sk.pg_port))
-                        .collect::<Vec<String>>()
-                        .join(",");
-                    conf.append("neon.safekeepers", &safekeepers);
-                } else {
-                    // We only use setup without safekeepers for tests,
-                    // and don't care about data durability on pageserver,
-                    // so set more relaxed synchronous_commit.
-                    conf.append("synchronous_commit", "remote_write");
-
-                    // Configure the node to stream WAL directly to the pageserver
-                    // This isn't really a supported configuration, but can be useful for
-                    // testing.
-                    conf.append("synchronous_standby_names", "pageserver");
-                }
-            }
-            ComputeMode::Static(lsn) => {
-                conf.append("recovery_target_lsn", &lsn.to_string());
-            }
-            ComputeMode::Replica => {
-                assert!(!self.env.safekeepers.is_empty());
-
-                // TODO: use future host field from safekeeper spec
-                // Pass the list of safekeepers to the replica so that it can connect to any of them,
-                // whichever is availiable.
-                let sk_ports = self
-                    .env
-                    .safekeepers
-                    .iter()
-                    .map(|x| x.pg_port.to_string())
-                    .collect::<Vec<_>>()
-                    .join(",");
-                let sk_hosts = vec!["localhost"; self.env.safekeepers.len()].join(",");
-
-                let connstr = format!(
-                    "host={} port={} options='-c timeline_id={} tenant_id={}' application_name=replica replication=true",
-                    sk_hosts,
-                    sk_ports,
-                    &self.timeline_id.to_string(),
-                    &self.tenant_id.to_string(),
-                );
-
-                let slot_name = format!("repl_{}_", self.timeline_id);
-                conf.append("primary_conninfo", connstr.as_str());
-                conf.append("primary_slot_name", slot_name.as_str());
-                conf.append("hot_standby", "on");
-                // prefetching of blocks referenced in WAL doesn't make sense for us
-                // Neon hot standby ignores pages that are not in the shared_buffers
-                if self.pg_version >= 15 {
-                    conf.append("recovery_prefetch", "off");
-                }
-            }
-        }
-
-        Ok(conf)
-    }
-
-    pub fn endpoint_path(&self) -> PathBuf {
-        self.env.endpoints_path().join(&self.endpoint_id)
-    }
-
-    pub fn pgdata(&self) -> PathBuf {
-        self.endpoint_path().join("pgdata")
-    }
-
-    pub fn status(&self) -> &str {
-        let timeout = Duration::from_millis(300);
-        let has_pidfile = self.pgdata().join("postmaster.pid").exists();
-        let can_connect = TcpStream::connect_timeout(&self.pg_address, timeout).is_ok();
-
-        match (has_pidfile, can_connect) {
-            (true, true) => "running",
-            (false, false) => "stopped",
-            (true, false) => "crashed",
-            (false, true) => "running, no pidfile",
-        }
-    }
-
-    fn pg_ctl(&self, args: &[&str], auth_token: &Option<String>) -> Result<()> {
-        let pg_ctl_path = self.env.pg_bin_dir(self.pg_version)?.join("pg_ctl");
-        let mut cmd = Command::new(&pg_ctl_path);
-        cmd.args(
-            [
-                &[
-                    "-D",
-                    self.pgdata().to_str().unwrap(),
-                    "-w", //wait till pg_ctl actually does what was asked
-                ],
-                args,
-            ]
-            .concat(),
-        )
-        .env_clear()
-        .env(
-            "LD_LIBRARY_PATH",
-            self.env.pg_lib_dir(self.pg_version)?.to_str().unwrap(),
-        )
-        .env(
-            "DYLD_LIBRARY_PATH",
-            self.env.pg_lib_dir(self.pg_version)?.to_str().unwrap(),
-        );
-
-        // Pass authentication token used for the connections to pageserver and safekeepers
-        if let Some(token) = auth_token {
-            cmd.env("NEON_AUTH_TOKEN", token);
-        }
-
-        let pg_ctl = cmd
-            .output()
-            .context(format!("{} failed", pg_ctl_path.display()))?;
-        if !pg_ctl.status.success() {
-            anyhow::bail!(
-                "pg_ctl failed, exit code: {}, stdout: {}, stderr: {}",
-                pg_ctl.status,
-                String::from_utf8_lossy(&pg_ctl.stdout),
-                String::from_utf8_lossy(&pg_ctl.stderr),
-            );
-        }
-        Ok(())
-    }
-
-    pub fn start(&self, auth_token: &Option<String>, safekeepers: Vec<NodeId>) -> Result<()> {
-        if self.status() == "running" {
-            anyhow::bail!("The endpoint is already running");
-        }
-
-        // Slurp the endpoints/<endpoint id>/postgresql.conf file into
-        // memory. We will include it in the spec file that we pass to
-        // `compute_ctl`, and `compute_ctl` will write it to the postgresql.conf
-        // in the data directory.
-        let postgresql_conf_path = self.endpoint_path().join("postgresql.conf");
-        let postgresql_conf = match std::fs::read(&postgresql_conf_path) {
-            Ok(content) => String::from_utf8(content)?,
-            Err(e) if e.kind() == std::io::ErrorKind::NotFound => "".to_string(),
-            Err(e) => {
-                return Err(anyhow::Error::new(e).context(format!(
-                    "failed to read config file in {}",
-                    postgresql_conf_path.to_str().unwrap()
-                )))
-            }
-        };
-
-        // We always start the compute node from scratch, so if the Postgres
-        // data dir exists from a previous launch, remove it first.
-        if self.pgdata().exists() {
-            std::fs::remove_dir_all(self.pgdata())?;
-        }
-
-        let pageserver_connstring = {
-            let config = &self.pageserver.pg_connection_config;
-            let (host, port) = (config.host(), config.port());
-
-            // NOTE: avoid spaces in connection string, because it is less error prone if we forward it somewhere.
-            format!("postgresql://no_user@{host}:{port}")
-        };
-        let mut safekeeper_connstrings = Vec::new();
-        if self.mode == ComputeMode::Primary {
-            for sk_id in safekeepers {
-                let sk = self
-                    .env
-                    .safekeepers
-                    .iter()
-                    .find(|node| node.id == sk_id)
-                    .ok_or_else(|| anyhow!("safekeeper {sk_id} does not exist"))?;
-                safekeeper_connstrings.push(format!("127.0.0.1:{}", sk.pg_port));
-            }
-        }
-
-        // Create spec file
-        let spec = ComputeSpec {
-            skip_pg_catalog_updates: false,
-            format_version: 1.0,
-            operation_uuid: None,
-            cluster: Cluster {
-                cluster_id: None, // project ID: not used
-                name: None,       // project name: not used
-                state: None,
-                roles: vec![],
-                databases: vec![],
-                settings: None,
-                postgresql_conf: Some(postgresql_conf),
-            },
-            delta_operations: None,
-            tenant_id: Some(self.tenant_id),
-            timeline_id: Some(self.timeline_id),
-            mode: self.mode,
-            pageserver_connstring: Some(pageserver_connstring),
-            safekeeper_connstrings,
-            storage_auth_token: auth_token.clone(),
-        };
-        let spec_path = self.endpoint_path().join("spec.json");
-        std::fs::write(spec_path, serde_json::to_string_pretty(&spec)?)?;
-
-        // Open log file. We'll redirect the stdout and stderr of `compute_ctl` to it.
-        let logfile = std::fs::OpenOptions::new()
-            .create(true)
-            .append(true)
-            .open(self.endpoint_path().join("compute.log"))?;
-
-        // Launch compute_ctl
-        println!("Starting postgres node at '{}'", self.connstr());
-        let mut cmd = Command::new(self.env.neon_distrib_dir.join("compute_ctl"));
-        cmd.args(["--http-port", &self.http_address.port().to_string()])
-            .args(["--pgdata", self.pgdata().to_str().unwrap()])
-            .args(["--connstr", &self.connstr()])
-            .args([
-                "--spec-path",
-                self.endpoint_path().join("spec.json").to_str().unwrap(),
-            ])
-            .args([
-                "--pgbin",
-                self.env
-                    .pg_bin_dir(self.pg_version)?
-                    .join("postgres")
-                    .to_str()
-                    .unwrap(),
-            ])
-            .stdin(std::process::Stdio::null())
-            .stderr(logfile.try_clone()?)
-            .stdout(logfile);
-        let _child = cmd.spawn()?;
-
-        // Wait for it to start
-        let mut attempt = 0;
-        const ATTEMPT_INTERVAL: Duration = Duration::from_millis(100);
-        const MAX_ATTEMPTS: u32 = 10 * 30; // Wait up to 30 s
-        loop {
-            attempt += 1;
-            match self.get_status() {
-                Ok(state) => {
-                    match state.status {
-                        ComputeStatus::Init => {
-                            if attempt == MAX_ATTEMPTS {
-                                bail!("compute startup timed out; still in Init state");
-                            }
-                            // keep retrying
-                        }
-                        ComputeStatus::Running => {
-                            // All good!
-                            break;
-                        }
-                        ComputeStatus::Failed => {
-                            bail!(
-                                "compute startup failed: {}",
-                                state
-                                    .error
-                                    .as_deref()
-                                    .unwrap_or("<no error from compute_ctl>")
-                            );
-                        }
-                        ComputeStatus::Empty
-                        | ComputeStatus::ConfigurationPending
-                        | ComputeStatus::Configuration => {
-                            bail!("unexpected compute status: {:?}", state.status)
-                        }
-                    }
-                }
-                Err(e) => {
-                    if attempt == MAX_ATTEMPTS {
-                        return Err(e).context(
-                            "timed out waiting to connect to compute_ctl HTTP; last error: {e}",
-                        );
-                    }
-                }
-            }
-            std::thread::sleep(ATTEMPT_INTERVAL);
-        }
-
-        Ok(())
-    }
-
-    // Call the /status HTTP API
-    pub fn get_status(&self) -> Result<ComputeState> {
-        let client = reqwest::blocking::Client::new();
-
-        let response = client
-            .request(
-                reqwest::Method::GET,
-                format!(
-                    "http://{}:{}/status",
-                    self.http_address.ip(),
-                    self.http_address.port()
-                ),
-            )
-            .send()?;
-
-        // Interpret the response
-        let status = response.status();
-        if !(status.is_client_error() || status.is_server_error()) {
-            Ok(response.json()?)
-        } else {
-            // reqwest does not export its error construction utility functions, so let's craft the message ourselves
-            let url = response.url().to_owned();
-            let msg = match response.text() {
-                Ok(err_body) => format!("Error: {}", err_body),
-                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
-            };
-            Err(anyhow::anyhow!(msg))
-        }
-    }
-
-    pub fn stop(&self, destroy: bool) -> Result<()> {
-        // If we are going to destroy data directory,
-        // use immediate shutdown mode, otherwise,
-        // shutdown gracefully to leave the data directory sane.
-        //
-        // Postgres is always started from scratch, so stop
-        // without destroy only used for testing and debugging.
-        //
-        if destroy {
-            self.pg_ctl(&["-m", "immediate", "stop"], &None)?;
-            println!(
-                "Destroying postgres data directory '{}'",
-                self.pgdata().to_str().unwrap()
-            );
-            std::fs::remove_dir_all(self.endpoint_path())?;
-        } else {
-            self.pg_ctl(&["stop"], &None)?;
-        }
-        Ok(())
-    }
-
-    pub fn connstr(&self) -> String {
-        format!(
-            "postgresql://{}@{}:{}/{}",
-            "cloud_admin",
-            self.pg_address.ip(),
-            self.pg_address.port(),
-            "postgres"
-        )
-    }
-}

control_plane/src/lib.rs

@@ -6,11 +6,28 @@
 // Intended to be used in integration tests and in CLI tools for
 // local installations.
 //
+use anyhow::{anyhow, bail, Context, Result};
+use std::fs;
+use std::path::Path;
 
-mod background_process;
-pub mod broker;
-pub mod endpoint;
+pub mod compute;
 pub mod local_env;
-pub mod pageserver;
 pub mod postgresql_conf;
 pub mod safekeeper;
+pub mod storage;
+
+/// Read a PID file
+///
+/// We expect a file that contains a single integer.
+/// We return an i32 for compatibility with libc and nix.
+pub fn read_pidfile(pidfile: &Path) -> Result<i32> {
+    let pid_str = fs::read_to_string(pidfile)
+        .with_context(|| format!("failed to read pidfile {:?}", pidfile))?;
+    let pid: i32 = pid_str
+        .parse()
+        .map_err(|_| anyhow!("failed to parse pidfile {:?}", pidfile))?;
+    if pid < 1 {
+        bail!("pidfile {:?} contained bad value '{}'", pidfile, pid);
+    }
+    Ok(pid)
+}

control_plane/src/local_env.rs

@@ -3,45 +3,32 @@
 //! Now it also provides init method which acts like a stub for proper installation
 //! script which will use local paths.
 
-use anyhow::{bail, ensure, Context};
-
-use postgres_backend::AuthType;
-use reqwest::Url;
+use anyhow::{bail, Context};
 use serde::{Deserialize, Serialize};
-use serde_with::{serde_as, DisplayFromStr};
-use std::collections::HashMap;
 use std::env;
+use std::fmt::Write;
 use std::fs;
-use std::net::IpAddr;
-use std::net::Ipv4Addr;
-use std::net::SocketAddr;
 use std::path::{Path, PathBuf};
 use std::process::{Command, Stdio};
-use utils::{
-    auth::{encode_from_key_file, Claims},
-    id::{NodeId, TenantId, TenantTimelineId, TimelineId},
-};
-
-use crate::safekeeper::SafekeeperNode;
-
-pub const DEFAULT_PG_VERSION: u32 = 15;
+use zenith_utils::auth::{encode_from_key_file, Claims, Scope};
+use zenith_utils::postgres_backend::AuthType;
+use zenith_utils::zid::{opt_display_serde, ZTenantId};
 
 //
-// This data structures represents neon_local CLI config
+// This data structures represents zenith CLI config
 //
-// It is deserialized from the .neon/config file, or the config file passed
-// to 'neon_local init --config=<path>' option. See control_plane/simple.conf for
+// It is deserialized from the .zenith/config file, or the config file passed
+// to 'zenith init --config=<path>' option. See control_plane/simple.conf for
 // an example.
 //
-#[serde_as]
-#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
+#[derive(Serialize, Deserialize, Clone, Debug)]
 pub struct LocalEnv {
     // Base directory for all the nodes (the pageserver, safekeepers and
-    // compute endpoints).
+    // compute nodes).
     //
     // This is not stored in the config file. Rather, this is the path where the
-    // config file itself is. It is read from the NEON_REPO_DIR env variable or
-    // '.neon' if not given.
+    // config file itself is. It is read from the ZENITH_REPO_DIR env variable or
+    // '.zenith' if not given.
     #[serde(skip)]
     pub base_data_dir: PathBuf,
 
@@ -54,154 +41,94 @@ pub struct LocalEnv {
 
     // Path to pageserver binary.
     #[serde(default)]
-    pub neon_distrib_dir: PathBuf,
+    pub zenith_distrib_dir: PathBuf,
 
-    // Default tenant ID to use with the 'neon_local' command line utility, when
-    // --tenant_id is not explicitly specified.
+    // Default tenant ID to use with the 'zenith' command line utility, when
+    // --tenantid is not explicitly specified.
+    #[serde(with = "opt_display_serde")]
     #[serde(default)]
-    #[serde_as(as = "Option<DisplayFromStr>")]
-    pub default_tenant_id: Option<TenantId>,
+    pub default_tenantid: Option<ZTenantId>,
 
     // used to issue tokens during e.g pg start
     #[serde(default)]
     pub private_key_path: PathBuf,
 
-    pub broker: NeonBroker,
-
     pub pageserver: PageServerConf,
 
     #[serde(default)]
     pub safekeepers: Vec<SafekeeperConf>,
-
-    /// Keep human-readable aliases in memory (and persist them to config), to hide ZId hex strings from the user.
-    #[serde(default)]
-    // A `HashMap<String, HashMap<TenantId, TimelineId>>` would be more appropriate here,
-    // but deserialization into a generic toml object as `toml::Value::try_from` fails with an error.
-    // https://toml.io/en/v1.0.0 does not contain a concept of "a table inside another table".
-    #[serde_as(as = "HashMap<_, Vec<(DisplayFromStr, DisplayFromStr)>>")]
-    branch_name_mappings: HashMap<String, Vec<(TenantId, TimelineId)>>,
 }
 
-/// Broker config for cluster internal communication.
-#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
-#[serde(default)]
-pub struct NeonBroker {
-    /// Broker listen address for storage nodes coordination, e.g. '127.0.0.1:50051'.
-    pub listen_addr: SocketAddr,
-}
-
-// Dummy Default impl to satisfy Deserialize derive.
-impl Default for NeonBroker {
-    fn default() -> Self {
-        NeonBroker {
-            listen_addr: SocketAddr::new(IpAddr::V4(Ipv4Addr::new(0, 0, 0, 0)), 0),
-        }
-    }
-}
-
-impl NeonBroker {
-    pub fn client_url(&self) -> Url {
-        Url::parse(&format!("http://{}", self.listen_addr)).expect("failed to construct url")
-    }
-}
-
-#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
+#[derive(Serialize, Deserialize, Clone, Debug)]
 #[serde(default)]
 pub struct PageServerConf {
-    // node id
-    pub id: NodeId,
-
     // Pageserver connection settings
     pub listen_pg_addr: String,
     pub listen_http_addr: String,
 
-    // auth type used for the PG and HTTP ports
-    pub pg_auth_type: AuthType,
-    pub http_auth_type: AuthType,
+    // used to determine which auth type is used
+    pub auth_type: AuthType,
+
+    // jwt auth token used for communication with pageserver
+    pub auth_token: String,
 }
 
 impl Default for PageServerConf {
     fn default() -> Self {
         Self {
-            id: NodeId(0),
             listen_pg_addr: String::new(),
             listen_http_addr: String::new(),
-            pg_auth_type: AuthType::Trust,
-            http_auth_type: AuthType::Trust,
+            auth_type: AuthType::Trust,
+            auth_token: String::new(),
         }
     }
 }
 
-#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
+#[derive(Serialize, Deserialize, Clone, Debug)]
 #[serde(default)]
 pub struct SafekeeperConf {
-    pub id: NodeId,
+    pub name: String,
     pub pg_port: u16,
     pub http_port: u16,
     pub sync: bool,
-    pub remote_storage: Option<String>,
-    pub backup_threads: Option<u32>,
-    pub auth_enabled: bool,
 }
 
 impl Default for SafekeeperConf {
     fn default() -> Self {
         Self {
-            id: NodeId(0),
+            name: String::new(),
             pg_port: 0,
             http_port: 0,
             sync: true,
-            remote_storage: None,
-            backup_threads: None,
-            auth_enabled: false,
         }
     }
 }
 
 impl LocalEnv {
-    pub fn pg_distrib_dir_raw(&self) -> PathBuf {
-        self.pg_distrib_dir.clone()
+    // postgres installation paths
+    pub fn pg_bin_dir(&self) -> PathBuf {
+        self.pg_distrib_dir.join("bin")
+    }
+    pub fn pg_lib_dir(&self) -> PathBuf {
+        self.pg_distrib_dir.join("lib")
     }
 
-    pub fn pg_distrib_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
-        let path = self.pg_distrib_dir.clone();
-
-        match pg_version {
-            14 => Ok(path.join(format!("v{pg_version}"))),
-            15 => Ok(path.join(format!("v{pg_version}"))),
-            _ => bail!("Unsupported postgres version: {}", pg_version),
-        }
+    pub fn pageserver_bin(&self) -> anyhow::Result<PathBuf> {
+        Ok(self.zenith_distrib_dir.join("pageserver"))
     }
 
-    pub fn pg_bin_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
-        match pg_version {
-            14 => Ok(self.pg_distrib_dir(pg_version)?.join("bin")),
-            15 => Ok(self.pg_distrib_dir(pg_version)?.join("bin")),
-            _ => bail!("Unsupported postgres version: {}", pg_version),
-        }
-    }
-    pub fn pg_lib_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
-        match pg_version {
-            14 => Ok(self.pg_distrib_dir(pg_version)?.join("lib")),
-            15 => Ok(self.pg_distrib_dir(pg_version)?.join("lib")),
-            _ => bail!("Unsupported postgres version: {}", pg_version),
-        }
+    pub fn safekeeper_bin(&self) -> anyhow::Result<PathBuf> {
+        Ok(self.zenith_distrib_dir.join("safekeeper"))
     }
 
-    pub fn pageserver_bin(&self) -> PathBuf {
-        self.neon_distrib_dir.join("pageserver")
+    pub fn pg_data_dirs_path(&self) -> PathBuf {
+        self.base_data_dir.join("pgdatadirs").join("tenants")
     }
 
-    pub fn safekeeper_bin(&self) -> PathBuf {
-        self.neon_distrib_dir.join("safekeeper")
-    }
-
-    pub fn storage_broker_bin(&self) -> PathBuf {
-        self.neon_distrib_dir.join("storage_broker")
-    }
-
-    pub fn endpoints_path(&self) -> PathBuf {
-        self.base_data_dir.join("endpoints")
+    pub fn pg_data_dir(&self, tenantid: &ZTenantId, branch_name: &str) -> PathBuf {
+        self.pg_data_dirs_path()
+            .join(tenantid.to_string())
+            .join(branch_name)
     }
 
     // TODO: move pageserver files into ./pageserver
@@ -209,84 +136,51 @@ impl LocalEnv {
         self.base_data_dir.clone()
     }
 
-    pub fn safekeeper_data_dir(&self, data_dir_name: &str) -> PathBuf {
-        self.base_data_dir.join("safekeepers").join(data_dir_name)
-    }
-
-    pub fn register_branch_mapping(
-        &mut self,
-        branch_name: String,
-        tenant_id: TenantId,
-        timeline_id: TimelineId,
-    ) -> anyhow::Result<()> {
-        let existing_values = self
-            .branch_name_mappings
-            .entry(branch_name.clone())
-            .or_default();
-
-        let existing_ids = existing_values
-            .iter()
-            .find(|(existing_tenant_id, _)| existing_tenant_id == &tenant_id);
-
-        if let Some((_, old_timeline_id)) = existing_ids {
-            if old_timeline_id == &timeline_id {
-                Ok(())
-            } else {
-                bail!("branch '{branch_name}' is already mapped to timeline {old_timeline_id}, cannot map to another timeline {timeline_id}");
-            }
-        } else {
-            existing_values.push((tenant_id, timeline_id));
-            Ok(())
-        }
-    }
-
-    pub fn get_branch_timeline_id(
-        &self,
-        branch_name: &str,
-        tenant_id: TenantId,
-    ) -> Option<TimelineId> {
-        self.branch_name_mappings
-            .get(branch_name)?
-            .iter()
-            .find(|(mapped_tenant_id, _)| mapped_tenant_id == &tenant_id)
-            .map(|&(_, timeline_id)| timeline_id)
-            .map(TimelineId::from)
-    }
-
-    pub fn timeline_name_mappings(&self) -> HashMap<TenantTimelineId, String> {
-        self.branch_name_mappings
-            .iter()
-            .flat_map(|(name, tenant_timelines)| {
-                tenant_timelines.iter().map(|&(tenant_id, timeline_id)| {
-                    (TenantTimelineId::new(tenant_id, timeline_id), name.clone())
-                })
-            })
-            .collect()
+    pub fn safekeeper_data_dir(&self, node_name: &str) -> PathBuf {
+        self.base_data_dir.join("safekeepers").join(node_name)
     }
 
     /// Create a LocalEnv from a config file.
     ///
     /// Unlike 'load_config', this function fills in any defaults that are missing
     /// from the config file.
-    pub fn parse_config(toml: &str) -> anyhow::Result<Self> {
+    pub fn create_config(toml: &str) -> anyhow::Result<Self> {
         let mut env: LocalEnv = toml::from_str(toml)?;
 
         // Find postgres binaries.
-        // Follow POSTGRES_DISTRIB_DIR if set, otherwise look in "pg_install".
-        // Note that later in the code we assume, that distrib dirs follow the same pattern
-        // for all postgres versions.
+        // Follow POSTGRES_DISTRIB_DIR if set, otherwise look in "tmp_install".
         if env.pg_distrib_dir == Path::new("") {
             if let Some(postgres_bin) = env::var_os("POSTGRES_DISTRIB_DIR") {
                 env.pg_distrib_dir = postgres_bin.into();
             } else {
                 let cwd = env::current_dir()?;
-                env.pg_distrib_dir = cwd.join("pg_install")
+                env.pg_distrib_dir = cwd.join("tmp_install")
+            }
+        }
+        if !env.pg_distrib_dir.join("bin/postgres").exists() {
+            bail!(
+                "Can't find postgres binary at {}",
+                env.pg_distrib_dir.display()
+            );
+        }
+
+        // Find zenith binaries.
+        if env.zenith_distrib_dir == Path::new("") {
+            env.zenith_distrib_dir = env::current_exe()?.parent().unwrap().to_owned();
+        }
+        for binary in ["pageserver", "safekeeper"] {
+            if !env.zenith_distrib_dir.join(binary).exists() {
+                bail!(
+                    "Can't find binary '{}' in zenith distrib dir '{}'",
+                    binary,
+                    env.zenith_distrib_dir.display()
+                );
             }
         }
 
-        // Find neon binaries.
-        if env.neon_distrib_dir == Path::new("") {
-            env.neon_distrib_dir = env::current_exe()?.parent().unwrap().to_owned();
+        // If no initial tenant ID was given, generate it.
+        if env.default_tenantid.is_none() {
+            env.default_tenantid = Some(ZTenantId::generate());
         }
 
         env.base_data_dir = base_path();
@@ -300,12 +194,12 @@ impl LocalEnv {
 
         if !repopath.exists() {
             bail!(
-                "Neon config is not found in {}. You need to run 'neon_local init' first",
+                "Zenith config is not found in {}. You need to run 'zenith init' first",
                 repopath.to_str().unwrap()
             );
         }
 
-        // TODO: check that it looks like a neon repository
+        // TODO: check that it looks like a zenith repository
 
         // load and parse file
         let config = fs::read_to_string(repopath.join("config"))?;
@@ -316,39 +210,6 @@ impl LocalEnv {
         Ok(env)
     }
 
-    pub fn persist_config(&self, base_path: &Path) -> anyhow::Result<()> {
-        // Currently, the user first passes a config file with 'neon_local init --config=<path>'
-        // We read that in, in `create_config`, and fill any missing defaults. Then it's saved
-        // to .neon/config. TODO: We lose any formatting and comments along the way, which is
-        // a bit sad.
-        let mut conf_content = r#"# This file describes a locale deployment of the page server
-# and safekeeeper node. It is read by the 'neon_local' command-line
-# utility.
-"#
-        .to_string();
-
-        // Convert the LocalEnv to a toml file.
-        //
-        // This could be as simple as this:
-        //
-        // conf_content += &toml::to_string_pretty(env)?;
-        //
-        // But it results in a "values must be emitted before tables". I'm not sure
-        // why, AFAICS the table, i.e. 'safekeepers: Vec<SafekeeperConf>' is last.
-        // Maybe rust reorders the fields to squeeze avoid padding or something?
-        // In any case, converting to toml::Value first, and serializing that, works.
-        // See https://github.com/alexcrichton/toml-rs/issues/142
-        conf_content += &toml::to_string_pretty(&toml::Value::try_from(self)?)?;
-
-        let target_config_path = base_path.join("config");
-        fs::write(&target_config_path, conf_content).with_context(|| {
-            format!(
-                "Failed to write config file into path '{}'",
-                target_config_path.display()
-            )
-        })
-    }
-
     // this function is used only for testing purposes in CLI e g generate tokens during init
     pub fn generate_auth_token(&self, claims: &Claims) -> anyhow::Result<String> {
         let private_key_path = if self.private_key_path.is_absolute() {
@@ -362,149 +223,107 @@ impl LocalEnv {
     }
 
     //
-    // Initialize a new Neon repository
+    // Initialize a new Zenith repository
     //
-    pub fn init(&mut self, pg_version: u32) -> anyhow::Result<()> {
+    pub fn init(&mut self) -> anyhow::Result<()> {
         // check if config already exists
         let base_path = &self.base_data_dir;
-        ensure!(
-            base_path != Path::new(""),
-            "repository base path is missing"
-        );
-
-        ensure!(
-            !base_path.exists(),
-            "directory '{}' already exists. Perhaps already initialized?",
-            base_path.display()
-        );
-        if !self.pg_bin_dir(pg_version)?.join("postgres").exists() {
+        if base_path == Path::new("") {
+            bail!("repository base path is missing");
+        }
+        if base_path.exists() {
             bail!(
-                "Can't find postgres binary at {}",
-                self.pg_bin_dir(pg_version)?.display()
+                "directory '{}' already exists. Perhaps already initialized?",
+                base_path.to_str().unwrap()
             );
         }
-        for binary in ["pageserver", "safekeeper"] {
-            if !self.neon_distrib_dir.join(binary).exists() {
+
+        fs::create_dir(&base_path)?;
+
+        // generate keys for jwt
+        // openssl genrsa -out private_key.pem 2048
+        let private_key_path;
+        if self.private_key_path == PathBuf::new() {
+            private_key_path = base_path.join("auth_private_key.pem");
+            let keygen_output = Command::new("openssl")
+                .arg("genrsa")
+                .args(&["-out", private_key_path.to_str().unwrap()])
+                .arg("2048")
+                .stdout(Stdio::null())
+                .output()
+                .with_context(|| "failed to generate auth private key")?;
+            if !keygen_output.status.success() {
                 bail!(
-                    "Can't find binary '{binary}' in neon distrib dir '{}'",
-                    self.neon_distrib_dir.display()
+                    "openssl failed: '{}'",
+                    String::from_utf8_lossy(&keygen_output.stderr)
+                );
+            }
+            self.private_key_path = PathBuf::from("auth_private_key.pem");
+
+            let public_key_path = base_path.join("auth_public_key.pem");
+            // openssl rsa -in private_key.pem -pubout -outform PEM -out public_key.pem
+            let keygen_output = Command::new("openssl")
+                .arg("rsa")
+                .args(&["-in", private_key_path.to_str().unwrap()])
+                .arg("-pubout")
+                .args(&["-outform", "PEM"])
+                .args(&["-out", public_key_path.to_str().unwrap()])
+                .stdout(Stdio::null())
+                .output()
+                .with_context(|| "failed to generate auth private key")?;
+            if !keygen_output.status.success() {
+                bail!(
+                    "openssl failed: '{}'",
+                    String::from_utf8_lossy(&keygen_output.stderr)
                 );
             }
         }
 
-        fs::create_dir(base_path)?;
+        self.pageserver.auth_token =
+            self.generate_auth_token(&Claims::new(None, Scope::PageServerApi))?;
 
-        // Generate keypair for JWT.
-        //
-        // The keypair is only needed if authentication is enabled in any of the
-        // components. For convenience, we generate the keypair even if authentication
-        // is not enabled, so that you can easily enable it after the initialization
-        // step. However, if the key generation fails, we treat it as non-fatal if
-        // authentication was not enabled.
-        if self.private_key_path == PathBuf::new() {
-            match generate_auth_keys(
-                base_path.join("auth_private_key.pem").as_path(),
-                base_path.join("auth_public_key.pem").as_path(),
-            ) {
-                Ok(()) => {
-                    self.private_key_path = PathBuf::from("auth_private_key.pem");
-                }
-                Err(e) => {
-                    if !self.auth_keys_needed() {
-                        eprintln!("Could not generate keypair for JWT authentication: {e}");
-                        eprintln!("Continuing anyway because authentication was not enabled");
-                        self.private_key_path = PathBuf::from("auth_private_key.pem");
-                    } else {
-                        return Err(e);
-                    }
-                }
-            }
-        }
-
-        fs::create_dir_all(self.endpoints_path())?;
+        fs::create_dir_all(self.pg_data_dirs_path())?;
 
         for safekeeper in &self.safekeepers {
-            fs::create_dir_all(SafekeeperNode::datadir_path_by_id(self, safekeeper.id))?;
+            fs::create_dir_all(self.safekeeper_data_dir(&safekeeper.name))?;
         }
 
-        self.persist_config(base_path)
-    }
+        let mut conf_content = String::new();
 
-    fn auth_keys_needed(&self) -> bool {
-        self.pageserver.pg_auth_type == AuthType::NeonJWT
-            || self.pageserver.http_auth_type == AuthType::NeonJWT
-            || self.safekeepers.iter().any(|sk| sk.auth_enabled)
+        // Currently, the user first passes a config file with 'zenith init --config=<path>'
+        // We read that in, in `create_config`, and fill any missing defaults. Then it's saved
+        // to .zenith/config. TODO: We lose any formatting and comments along the way, which is
+        // a bit sad.
+        write!(
+            &mut conf_content,
+            r#"# This file describes a locale deployment of the page server
+# and safekeeeper node. It is read by the 'zenith' command-line
+# utility.
+"#
+        )?;
+
+        // Convert the LocalEnv to a toml file.
+        //
+        // This could be as simple as this:
+        //
+        // conf_content += &toml::to_string_pretty(env)?;
+        //
+        // But it results in a "values must be emitted before tables". I'm not sure
+        // why, AFAICS the table, i.e. 'safekeepers: Vec<SafekeeperConf>' is last.
+        // Maybe rust reorders the fields to squeeze avoid padding or something?
+        // In any case, converting to toml::Value first, and serializing that, works.
+        // See https://github.com/alexcrichton/toml-rs/issues/142
+        conf_content += &toml::to_string_pretty(&toml::Value::try_from(&self)?)?;
+
+        fs::write(base_path.join("config"), conf_content)?;
+
+        Ok(())
     }
 }
 
 fn base_path() -> PathBuf {
-    match std::env::var_os("NEON_REPO_DIR") {
-        Some(val) => PathBuf::from(val),
-        None => PathBuf::from(".neon"),
-    }
-}
-
-/// Generate a public/private key pair for JWT authentication
-fn generate_auth_keys(private_key_path: &Path, public_key_path: &Path) -> anyhow::Result<()> {
-    // Generate the key pair
-    //
-    // openssl genpkey -algorithm ed25519 -out auth_private_key.pem
-    let keygen_output = Command::new("openssl")
-        .arg("genpkey")
-        .args(["-algorithm", "ed25519"])
-        .args(["-out", private_key_path.to_str().unwrap()])
-        .stdout(Stdio::null())
-        .output()
-        .context("failed to generate auth private key")?;
-    if !keygen_output.status.success() {
-        bail!(
-            "openssl failed: '{}'",
-            String::from_utf8_lossy(&keygen_output.stderr)
-        );
-    }
-    // Extract the public key from the private key file
-    //
-    // openssl pkey -in auth_private_key.pem -pubout -out auth_public_key.pem
-    let keygen_output = Command::new("openssl")
-        .arg("pkey")
-        .args(["-in", private_key_path.to_str().unwrap()])
-        .arg("-pubout")
-        .args(["-out", public_key_path.to_str().unwrap()])
-        .output()
-        .context("failed to extract public key from private key")?;
-    if !keygen_output.status.success() {
-        bail!(
-            "openssl failed: '{}'",
-            String::from_utf8_lossy(&keygen_output.stderr)
-        );
-    }
-    Ok(())
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    #[test]
-    fn simple_conf_parsing() {
-        let simple_conf_toml = include_str!("../simple.conf");
-        let simple_conf_parse_result = LocalEnv::parse_config(simple_conf_toml);
-        assert!(
-            simple_conf_parse_result.is_ok(),
-            "failed to parse simple config {simple_conf_toml}, reason: {simple_conf_parse_result:?}"
-        );
-
-        let string_to_replace = "listen_addr = '127.0.0.1:50051'";
-        let spoiled_url_str = "listen_addr = '!@$XOXO%^&'";
-        let spoiled_url_toml = simple_conf_toml.replace(string_to_replace, spoiled_url_str);
-        assert!(
-            spoiled_url_toml.contains(spoiled_url_str),
-            "Failed to replace string {string_to_replace} in the toml file {simple_conf_toml}"
-        );
-        let spoiled_url_parse_result = LocalEnv::parse_config(&spoiled_url_toml);
-        assert!(
-            spoiled_url_parse_result.is_err(),
-            "expected toml with invalid Url {spoiled_url_toml} to fail the parsing, but got {spoiled_url_parse_result:?}"
-        );
+    match std::env::var_os("ZENITH_REPO_DIR") {
+        Some(val) => PathBuf::from(val.to_str().unwrap()),
+        None => ".zenith".into(),
     }
 }

control_plane/src/pageserver.rs

@@ -1,595 +0,0 @@
-//! Code to manage pageservers
-//!
-//! In the local test environment, the pageserver stores its data directly in
-//!
-//!   .neon/
-//!
-use std::borrow::Cow;
-use std::collections::HashMap;
-use std::fs::File;
-use std::io::{BufReader, Write};
-use std::num::NonZeroU64;
-use std::path::PathBuf;
-use std::process::{Child, Command};
-use std::{io, result};
-
-use anyhow::{bail, Context};
-use pageserver_api::models::{self, TenantInfo, TimelineInfo};
-use postgres_backend::AuthType;
-use postgres_connection::{parse_host_port, PgConnectionConfig};
-use reqwest::blocking::{Client, RequestBuilder, Response};
-use reqwest::{IntoUrl, Method};
-use thiserror::Error;
-use utils::auth::{Claims, Scope};
-use utils::{
-    http::error::HttpErrorBody,
-    id::{TenantId, TimelineId},
-    lsn::Lsn,
-};
-
-use crate::{background_process, local_env::LocalEnv};
-
-#[derive(Error, Debug)]
-pub enum PageserverHttpError {
-    #[error("Reqwest error: {0}")]
-    Transport(#[from] reqwest::Error),
-
-    #[error("Error: {0}")]
-    Response(String),
-}
-
-impl From<anyhow::Error> for PageserverHttpError {
-    fn from(e: anyhow::Error) -> Self {
-        Self::Response(e.to_string())
-    }
-}
-
-type Result<T> = result::Result<T, PageserverHttpError>;
-
-pub trait ResponseErrorMessageExt: Sized {
-    fn error_from_body(self) -> Result<Self>;
-}
-
-impl ResponseErrorMessageExt for Response {
-    fn error_from_body(self) -> Result<Self> {
-        let status = self.status();
-        if !(status.is_client_error() || status.is_server_error()) {
-            return Ok(self);
-        }
-
-        // reqwest does not export its error construction utility functions, so let's craft the message ourselves
-        let url = self.url().to_owned();
-        Err(PageserverHttpError::Response(
-            match self.json::<HttpErrorBody>() {
-                Ok(err_body) => format!("Error: {}", err_body.msg),
-                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
-            },
-        ))
-    }
-}
-
-//
-// Control routines for pageserver.
-//
-// Used in CLI and tests.
-//
-#[derive(Debug)]
-pub struct PageServerNode {
-    pub pg_connection_config: PgConnectionConfig,
-    pub env: LocalEnv,
-    pub http_client: Client,
-    pub http_base_url: String,
-}
-
-impl PageServerNode {
-    pub fn from_env(env: &LocalEnv) -> PageServerNode {
-        let (host, port) = parse_host_port(&env.pageserver.listen_pg_addr)
-            .expect("Unable to parse listen_pg_addr");
-        let port = port.unwrap_or(5432);
-        Self {
-            pg_connection_config: PgConnectionConfig::new_host_port(host, port),
-            env: env.clone(),
-            http_client: Client::new(),
-            http_base_url: format!("http://{}/v1", env.pageserver.listen_http_addr),
-        }
-    }
-
-    // pageserver conf overrides defined by neon_local configuration.
-    fn neon_local_overrides(&self) -> Vec<String> {
-        let id = format!("id={}", self.env.pageserver.id);
-        // FIXME: the paths should be shell-escaped to handle paths with spaces, quotas etc.
-        let pg_distrib_dir_param = format!(
-            "pg_distrib_dir='{}'",
-            self.env.pg_distrib_dir_raw().display()
-        );
-
-        let http_auth_type_param =
-            format!("http_auth_type='{}'", self.env.pageserver.http_auth_type);
-        let listen_http_addr_param = format!(
-            "listen_http_addr='{}'",
-            self.env.pageserver.listen_http_addr
-        );
-
-        let pg_auth_type_param = format!("pg_auth_type='{}'", self.env.pageserver.pg_auth_type);
-        let listen_pg_addr_param =
-            format!("listen_pg_addr='{}'", self.env.pageserver.listen_pg_addr);
-
-        let broker_endpoint_param = format!("broker_endpoint='{}'", self.env.broker.client_url());
-
-        let mut overrides = vec![
-            id,
-            pg_distrib_dir_param,
-            http_auth_type_param,
-            pg_auth_type_param,
-            listen_http_addr_param,
-            listen_pg_addr_param,
-            broker_endpoint_param,
-        ];
-
-        if self.env.pageserver.http_auth_type != AuthType::Trust
-            || self.env.pageserver.pg_auth_type != AuthType::Trust
-        {
-            overrides.push("auth_validation_public_key_path='auth_public_key.pem'".to_owned());
-        }
-        overrides
-    }
-
-    /// Initializes a pageserver node by creating its config with the overrides provided.
-    pub fn initialize(&self, config_overrides: &[&str]) -> anyhow::Result<()> {
-        // First, run `pageserver --init` and wait for it to write a config into FS and exit.
-        self.pageserver_init(config_overrides).with_context(|| {
-            format!(
-                "Failed to run init for pageserver node {}",
-                self.env.pageserver.id,
-            )
-        })
-    }
-
-    pub fn repo_path(&self) -> PathBuf {
-        self.env.pageserver_data_dir()
-    }
-
-    /// The pid file is created by the pageserver process, with its pid stored inside.
-    /// Other pageservers cannot lock the same file and overwrite it for as long as the current
-    /// pageserver runs. (Unless someone removes the file manually; never do that!)
-    fn pid_file(&self) -> PathBuf {
-        self.repo_path().join("pageserver.pid")
-    }
-
-    pub fn start(&self, config_overrides: &[&str]) -> anyhow::Result<Child> {
-        self.start_node(config_overrides, false)
-    }
-
-    fn pageserver_init(&self, config_overrides: &[&str]) -> anyhow::Result<()> {
-        let datadir = self.repo_path();
-        let node_id = self.env.pageserver.id;
-        println!(
-            "Initializing pageserver node {} at '{}' in {:?}",
-            node_id,
-            self.pg_connection_config.raw_address(),
-            datadir
-        );
-        io::stdout().flush()?;
-
-        let datadir_path_str = datadir.to_str().with_context(|| {
-            format!("Cannot start pageserver node {node_id} in path that has no string representation: {datadir:?}")
-        })?;
-        let mut args = self.pageserver_basic_args(config_overrides, datadir_path_str);
-        args.push(Cow::Borrowed("--init"));
-
-        let init_output = Command::new(self.env.pageserver_bin())
-            .args(args.iter().map(Cow::as_ref))
-            .envs(self.pageserver_env_variables()?)
-            .output()
-            .with_context(|| format!("Failed to run pageserver init for node {node_id}"))?;
-
-        anyhow::ensure!(
-            init_output.status.success(),
-            "Pageserver init for node {} did not finish successfully, stdout: {}, stderr: {}",
-            node_id,
-            String::from_utf8_lossy(&init_output.stdout),
-            String::from_utf8_lossy(&init_output.stderr),
-        );
-
-        Ok(())
-    }
-
-    fn start_node(&self, config_overrides: &[&str], update_config: bool) -> anyhow::Result<Child> {
-        let mut overrides = self.neon_local_overrides();
-        overrides.extend(config_overrides.iter().map(|&c| c.to_owned()));
-
-        let datadir = self.repo_path();
-        print!(
-            "Starting pageserver node {} at '{}' in {:?}",
-            self.env.pageserver.id,
-            self.pg_connection_config.raw_address(),
-            datadir
-        );
-        io::stdout().flush()?;
-
-        let datadir_path_str = datadir.to_str().with_context(|| {
-            format!(
-                "Cannot start pageserver node {} in path that has no string representation: {:?}",
-                self.env.pageserver.id, datadir,
-            )
-        })?;
-        let mut args = self.pageserver_basic_args(config_overrides, datadir_path_str);
-        if update_config {
-            args.push(Cow::Borrowed("--update-config"));
-        }
-
-        background_process::start_process(
-            "pageserver",
-            &datadir,
-            &self.env.pageserver_bin(),
-            args.iter().map(Cow::as_ref),
-            self.pageserver_env_variables()?,
-            background_process::InitialPidFile::Expect(&self.pid_file()),
-            || match self.check_status() {
-                Ok(()) => Ok(true),
-                Err(PageserverHttpError::Transport(_)) => Ok(false),
-                Err(e) => Err(anyhow::anyhow!("Failed to check node status: {e}")),
-            },
-        )
-    }
-
-    fn pageserver_basic_args<'a>(
-        &self,
-        config_overrides: &'a [&'a str],
-        datadir_path_str: &'a str,
-    ) -> Vec<Cow<'a, str>> {
-        let mut args = vec![Cow::Borrowed("-D"), Cow::Borrowed(datadir_path_str)];
-
-        let mut overrides = self.neon_local_overrides();
-        overrides.extend(config_overrides.iter().map(|&c| c.to_owned()));
-        for config_override in overrides {
-            args.push(Cow::Borrowed("-c"));
-            args.push(Cow::Owned(config_override));
-        }
-
-        args
-    }
-
-    fn pageserver_env_variables(&self) -> anyhow::Result<Vec<(String, String)>> {
-        // FIXME: why is this tied to pageserver's auth type? Whether or not the safekeeper
-        // needs a token, and how to generate that token, seems independent to whether
-        // the pageserver requires a token in incoming requests.
-        Ok(if self.env.pageserver.http_auth_type != AuthType::Trust {
-            // Generate a token to connect from the pageserver to a safekeeper
-            let token = self
-                .env
-                .generate_auth_token(&Claims::new(None, Scope::SafekeeperData))?;
-            vec![("NEON_AUTH_TOKEN".to_owned(), token)]
-        } else {
-            Vec::new()
-        })
-    }
-
-    ///
-    /// Stop the server.
-    ///
-    /// If 'immediate' is true, we use SIGQUIT, killing the process immediately.
-    /// Otherwise we use SIGTERM, triggering a clean shutdown
-    ///
-    /// If the server is not running, returns success
-    ///
-    pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
-        background_process::stop_process(immediate, "pageserver", &self.pid_file())
-    }
-
-    pub fn page_server_psql_client(&self) -> anyhow::Result<postgres::Client> {
-        let mut config = self.pg_connection_config.clone();
-        if self.env.pageserver.pg_auth_type == AuthType::NeonJWT {
-            let token = self
-                .env
-                .generate_auth_token(&Claims::new(None, Scope::PageServerApi))?;
-            config = config.set_password(Some(token));
-        }
-        Ok(config.connect_no_tls()?)
-    }
-
-    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> anyhow::Result<RequestBuilder> {
-        let mut builder = self.http_client.request(method, url);
-        if self.env.pageserver.http_auth_type == AuthType::NeonJWT {
-            let token = self
-                .env
-                .generate_auth_token(&Claims::new(None, Scope::PageServerApi))?;
-            builder = builder.bearer_auth(token)
-        }
-        Ok(builder)
-    }
-
-    pub fn check_status(&self) -> Result<()> {
-        self.http_request(Method::GET, format!("{}/status", self.http_base_url))?
-            .send()?
-            .error_from_body()?;
-        Ok(())
-    }
-
-    pub fn tenant_list(&self) -> Result<Vec<TenantInfo>> {
-        Ok(self
-            .http_request(Method::GET, format!("{}/tenant", self.http_base_url))?
-            .send()?
-            .error_from_body()?
-            .json()?)
-    }
-
-    pub fn tenant_create(
-        &self,
-        new_tenant_id: Option<TenantId>,
-        settings: HashMap<&str, &str>,
-    ) -> anyhow::Result<TenantId> {
-        let mut settings = settings.clone();
-
-        let config = models::TenantConfig {
-            checkpoint_distance: settings
-                .remove("checkpoint_distance")
-                .map(|x| x.parse::<u64>())
-                .transpose()?,
-            checkpoint_timeout: settings.remove("checkpoint_timeout").map(|x| x.to_string()),
-            compaction_target_size: settings
-                .remove("compaction_target_size")
-                .map(|x| x.parse::<u64>())
-                .transpose()?,
-            compaction_period: settings.remove("compaction_period").map(|x| x.to_string()),
-            compaction_threshold: settings
-                .remove("compaction_threshold")
-                .map(|x| x.parse::<usize>())
-                .transpose()?,
-            gc_horizon: settings
-                .remove("gc_horizon")
-                .map(|x| x.parse::<u64>())
-                .transpose()?,
-            gc_period: settings.remove("gc_period").map(|x| x.to_string()),
-            image_creation_threshold: settings
-                .remove("image_creation_threshold")
-                .map(|x| x.parse::<usize>())
-                .transpose()?,
-            pitr_interval: settings.remove("pitr_interval").map(|x| x.to_string()),
-            walreceiver_connect_timeout: settings
-                .remove("walreceiver_connect_timeout")
-                .map(|x| x.to_string()),
-            lagging_wal_timeout: settings
-                .remove("lagging_wal_timeout")
-                .map(|x| x.to_string()),
-            max_lsn_wal_lag: settings
-                .remove("max_lsn_wal_lag")
-                .map(|x| x.parse::<NonZeroU64>())
-                .transpose()
-                .context("Failed to parse 'max_lsn_wal_lag' as non zero integer")?,
-            trace_read_requests: settings
-                .remove("trace_read_requests")
-                .map(|x| x.parse::<bool>())
-                .transpose()
-                .context("Failed to parse 'trace_read_requests' as bool")?,
-            eviction_policy: settings
-                .remove("eviction_policy")
-                .map(serde_json::from_str)
-                .transpose()
-                .context("Failed to parse 'eviction_policy' json")?,
-            min_resident_size_override: settings
-                .remove("min_resident_size_override")
-                .map(|x| x.parse::<u64>())
-                .transpose()
-                .context("Failed to parse 'min_resident_size_override' as integer")?,
-            evictions_low_residence_duration_metric_threshold: settings
-                .remove("evictions_low_residence_duration_metric_threshold")
-                .map(|x| x.to_string()),
-            gc_feedback: settings
-                .remove("gc_feedback")
-                .map(|x| x.parse::<bool>())
-                .transpose()
-                .context("Failed to parse 'gc_feedback' as bool")?,
-        };
-
-        // If tenant ID was not specified, generate one
-        let new_tenant_id = new_tenant_id.unwrap_or(TenantId::generate());
-
-        let request = models::TenantCreateRequest {
-            new_tenant_id,
-            config,
-        };
-        if !settings.is_empty() {
-            bail!("Unrecognized tenant settings: {settings:?}")
-        }
-        self.http_request(Method::POST, format!("{}/tenant", self.http_base_url))?
-            .json(&request)
-            .send()?
-            .error_from_body()?
-            .json::<Option<String>>()
-            .with_context(|| {
-                format!("Failed to parse tenant creation response for tenant id: {new_tenant_id:?}")
-            })?
-            .context("No tenant id was found in the tenant creation response")
-            .and_then(|tenant_id_string| {
-                tenant_id_string.parse().with_context(|| {
-                    format!("Failed to parse response string as tenant id: '{tenant_id_string}'")
-                })
-            })
-    }
-
-    pub fn tenant_config(
-        &self,
-        tenant_id: TenantId,
-        mut settings: HashMap<&str, &str>,
-    ) -> anyhow::Result<()> {
-        let config = {
-            // Braces to make the diff easier to read
-            models::TenantConfig {
-                checkpoint_distance: settings
-                    .remove("checkpoint_distance")
-                    .map(|x| x.parse::<u64>())
-                    .transpose()
-                    .context("Failed to parse 'checkpoint_distance' as an integer")?,
-                checkpoint_timeout: settings.remove("checkpoint_timeout").map(|x| x.to_string()),
-                compaction_target_size: settings
-                    .remove("compaction_target_size")
-                    .map(|x| x.parse::<u64>())
-                    .transpose()
-                    .context("Failed to parse 'compaction_target_size' as an integer")?,
-                compaction_period: settings.remove("compaction_period").map(|x| x.to_string()),
-                compaction_threshold: settings
-                    .remove("compaction_threshold")
-                    .map(|x| x.parse::<usize>())
-                    .transpose()
-                    .context("Failed to parse 'compaction_threshold' as an integer")?,
-                gc_horizon: settings
-                    .remove("gc_horizon")
-                    .map(|x| x.parse::<u64>())
-                    .transpose()
-                    .context("Failed to parse 'gc_horizon' as an integer")?,
-                gc_period: settings.remove("gc_period").map(|x| x.to_string()),
-                image_creation_threshold: settings
-                    .remove("image_creation_threshold")
-                    .map(|x| x.parse::<usize>())
-                    .transpose()
-                    .context("Failed to parse 'image_creation_threshold' as non zero integer")?,
-                pitr_interval: settings.remove("pitr_interval").map(|x| x.to_string()),
-                walreceiver_connect_timeout: settings
-                    .remove("walreceiver_connect_timeout")
-                    .map(|x| x.to_string()),
-                lagging_wal_timeout: settings
-                    .remove("lagging_wal_timeout")
-                    .map(|x| x.to_string()),
-                max_lsn_wal_lag: settings
-                    .remove("max_lsn_wal_lag")
-                    .map(|x| x.parse::<NonZeroU64>())
-                    .transpose()
-                    .context("Failed to parse 'max_lsn_wal_lag' as non zero integer")?,
-                trace_read_requests: settings
-                    .remove("trace_read_requests")
-                    .map(|x| x.parse::<bool>())
-                    .transpose()
-                    .context("Failed to parse 'trace_read_requests' as bool")?,
-                eviction_policy: settings
-                    .remove("eviction_policy")
-                    .map(serde_json::from_str)
-                    .transpose()
-                    .context("Failed to parse 'eviction_policy' json")?,
-                min_resident_size_override: settings
-                    .remove("min_resident_size_override")
-                    .map(|x| x.parse::<u64>())
-                    .transpose()
-                    .context("Failed to parse 'min_resident_size_override' as an integer")?,
-                evictions_low_residence_duration_metric_threshold: settings
-                    .remove("evictions_low_residence_duration_metric_threshold")
-                    .map(|x| x.to_string()),
-                gc_feedback: settings
-                    .remove("gc_feedback")
-                    .map(|x| x.parse::<bool>())
-                    .transpose()
-                    .context("Failed to parse 'gc_feedback' as bool")?,
-            }
-        };
-
-        if !settings.is_empty() {
-            bail!("Unrecognized tenant settings: {settings:?}")
-        }
-
-        self.http_request(Method::PUT, format!("{}/tenant/config", self.http_base_url))?
-            .json(&models::TenantConfigRequest { tenant_id, config })
-            .send()?
-            .error_from_body()?;
-
-        Ok(())
-    }
-
-    pub fn timeline_list(&self, tenant_id: &TenantId) -> anyhow::Result<Vec<TimelineInfo>> {
-        let timeline_infos: Vec<TimelineInfo> = self
-            .http_request(
-                Method::GET,
-                format!("{}/tenant/{}/timeline", self.http_base_url, tenant_id),
-            )?
-            .send()?
-            .error_from_body()?
-            .json()?;
-
-        Ok(timeline_infos)
-    }
-
-    pub fn timeline_create(
-        &self,
-        tenant_id: TenantId,
-        new_timeline_id: Option<TimelineId>,
-        ancestor_start_lsn: Option<Lsn>,
-        ancestor_timeline_id: Option<TimelineId>,
-        pg_version: Option<u32>,
-    ) -> anyhow::Result<TimelineInfo> {
-        // If timeline ID was not specified, generate one
-        let new_timeline_id = new_timeline_id.unwrap_or(TimelineId::generate());
-
-        self.http_request(
-            Method::POST,
-            format!("{}/tenant/{}/timeline", self.http_base_url, tenant_id),
-        )?
-        .json(&models::TimelineCreateRequest {
-            new_timeline_id,
-            ancestor_start_lsn,
-            ancestor_timeline_id,
-            pg_version,
-        })
-        .send()?
-        .error_from_body()?
-        .json::<Option<TimelineInfo>>()
-        .with_context(|| {
-            format!("Failed to parse timeline creation response for tenant id: {tenant_id}")
-        })?
-        .with_context(|| {
-            format!(
-                "No timeline id was found in the timeline creation response for tenant {tenant_id}"
-            )
-        })
-    }
-
-    /// Import a basebackup prepared using either:
-    /// a) `pg_basebackup -F tar`, or
-    /// b) The `fullbackup` pageserver endpoint
-    ///
-    /// # Arguments
-    /// * `tenant_id` - tenant to import into. Created if not exists
-    /// * `timeline_id` - id to assign to imported timeline
-    /// * `base` - (start lsn of basebackup, path to `base.tar` file)
-    /// * `pg_wal` - if there's any wal to import: (end lsn, path to `pg_wal.tar`)
-    pub fn timeline_import(
-        &self,
-        tenant_id: TenantId,
-        timeline_id: TimelineId,
-        base: (Lsn, PathBuf),
-        pg_wal: Option<(Lsn, PathBuf)>,
-        pg_version: u32,
-    ) -> anyhow::Result<()> {
-        let mut client = self.page_server_psql_client()?;
-
-        // Init base reader
-        let (start_lsn, base_tarfile_path) = base;
-        let base_tarfile = File::open(base_tarfile_path)?;
-        let mut base_reader = BufReader::new(base_tarfile);
-
-        // Init wal reader if necessary
-        let (end_lsn, wal_reader) = if let Some((end_lsn, wal_tarfile_path)) = pg_wal {
-            let wal_tarfile = File::open(wal_tarfile_path)?;
-            let wal_reader = BufReader::new(wal_tarfile);
-            (end_lsn, Some(wal_reader))
-        } else {
-            (start_lsn, None)
-        };
-
-        // Import base
-        let import_cmd = format!(
-            "import basebackup {tenant_id} {timeline_id} {start_lsn} {end_lsn} {pg_version}"
-        );
-        let mut writer = client.copy_in(&import_cmd)?;
-        io::copy(&mut base_reader, &mut writer)?;
-        writer.finish()?;
-
-        // Import wal if necessary
-        if let Some(mut wal_reader) = wal_reader {
-            let import_cmd = format!("import wal {tenant_id} {timeline_id} {start_lsn} {end_lsn}");
-            let mut writer = client.copy_in(&import_cmd)?;
-            io::copy(&mut wal_reader, &mut writer)?;
-            writer.finish()?;
-        }
-
-        Ok(())
-    }
-}

control_plane/src/postgresql_conf.rs

@@ -2,10 +2,10 @@
 /// Module for parsing postgresql.conf file.
 ///
 /// NOTE: This doesn't implement the full, correct postgresql.conf syntax. Just
-/// enough to extract a few settings we need in Neon, assuming you don't do
+/// enough to extract a few settings we need in Zenith, assuming you don't do
 /// funny stuff like include-directives or funny escaping.
-use anyhow::{bail, Context, Result};
-use once_cell::sync::Lazy;
+use anyhow::{anyhow, bail, Context, Result};
+use lazy_static::lazy_static;
 use regex::Regex;
 use std::collections::HashMap;
 use std::fmt;
@@ -13,13 +13,15 @@ use std::io::BufRead;
 use std::str::FromStr;
 
 /// In-memory representation of a postgresql.conf file
-#[derive(Default, Debug)]
+#[derive(Default)]
 pub struct PostgresConf {
     lines: Vec<String>,
     hash: HashMap<String, String>,
 }
 
-static CONF_LINE_RE: Lazy<Regex> = Lazy::new(|| Regex::new(r"^((?:\w|\.)+)\s*=\s*(\S+)$").unwrap());
+lazy_static! {
+    static ref CONF_LINE_RE: Regex = Regex::new(r"^((?:\w|\.)+)\s*=\s*(\S+)$").unwrap();
+}
 
 impl PostgresConf {
     pub fn new() -> PostgresConf {
@@ -76,7 +78,7 @@ impl PostgresConf {
         <T as FromStr>::Err: std::error::Error + Send + Sync + 'static,
     {
         self.get(field_name)
-            .with_context(|| format!("could not find '{}' option {}", field_name, context))?
+            .ok_or_else(|| anyhow!("could not find '{}' option {}", field_name, context))?
             .parse::<T>()
             .with_context(|| format!("could not parse '{}' option {}", field_name, context))
     }
@@ -137,10 +139,10 @@ fn escape_str(s: &str) -> String {
     //
     // This regex is a bit more conservative than the rules in guc-file.l, so we quote some
     // strings that PostgreSQL would accept without quoting, but that's OK.
-
-    static UNQUOTED_RE: Lazy<Regex> =
-        Lazy::new(|| Regex::new(r"(^[-+]?[0-9]+[a-zA-Z]*$)|(^[a-zA-Z][a-zA-Z0-9]*$)").unwrap());
-
+    lazy_static! {
+        static ref UNQUOTED_RE: Regex =
+            Regex::new(r"(^[-+]?[0-9]+[a-zA-Z]*$)|(^[a-zA-Z][a-zA-Z0-9]*$)").unwrap();
+    }
     if UNQUOTED_RE.is_match(s) {
         s.to_string()
     } else {

control_plane/src/safekeeper.rs

@@ -1,25 +1,25 @@
-//! Code to manage safekeepers
-//!
-//! In the local test environment, the data for each safekeeper is stored in
-//!
-//!   .neon/safekeepers/<safekeeper id>
-//!
 use std::io::Write;
+use std::net::TcpStream;
 use std::path::PathBuf;
-use std::process::Child;
-use std::{io, result};
+use std::process::Command;
+use std::sync::Arc;
+use std::time::Duration;
+use std::{io, result, thread};
 
-use anyhow::Context;
-use postgres_connection::PgConnectionConfig;
+use anyhow::bail;
+use nix::errno::Errno;
+use nix::sys::signal::{kill, Signal};
+use nix::unistd::Pid;
+use postgres::Config;
 use reqwest::blocking::{Client, RequestBuilder, Response};
 use reqwest::{IntoUrl, Method};
 use thiserror::Error;
-use utils::{http::error::HttpErrorBody, id::NodeId};
+use zenith_utils::http::error::HttpErrorBody;
 
-use crate::{
-    background_process,
-    local_env::{LocalEnv, SafekeeperConf},
-};
+use crate::local_env::{LocalEnv, SafekeeperConf};
+use crate::read_pidfile;
+use crate::storage::PageServerNode;
+use zenith_utils::connstring::connection_address;
 
 #[derive(Error, Debug)]
 pub enum SafekeeperHttpError {
@@ -43,7 +43,7 @@ impl ResponseErrorMessageExt for Response {
             return Ok(self);
         }
 
-        // reqwest does not export its error construction utility functions, so let's craft the message ourselves
+        // reqwest do not export it's error construction utility functions, so lets craft the message ourselves
         let url = self.url().to_owned();
         Err(SafekeeperHttpError::Response(
             match self.json::<HttpErrorBody>() {
@@ -61,119 +61,120 @@ impl ResponseErrorMessageExt for Response {
 //
 #[derive(Debug)]
 pub struct SafekeeperNode {
-    pub id: NodeId,
+    pub name: String,
 
     pub conf: SafekeeperConf,
 
-    pub pg_connection_config: PgConnectionConfig,
+    pub pg_connection_config: Config,
     pub env: LocalEnv,
     pub http_client: Client,
     pub http_base_url: String,
+
+    pub pageserver: Arc<PageServerNode>,
 }
 
 impl SafekeeperNode {
     pub fn from_env(env: &LocalEnv, conf: &SafekeeperConf) -> SafekeeperNode {
+        let pageserver = Arc::new(PageServerNode::from_env(env));
+
+        println!("initializing for {} for {}", conf.name, conf.http_port);
+
         SafekeeperNode {
-            id: conf.id,
+            name: conf.name.clone(),
             conf: conf.clone(),
             pg_connection_config: Self::safekeeper_connection_config(conf.pg_port),
             env: env.clone(),
             http_client: Client::new(),
-            http_base_url: format!("http://127.0.0.1:{}/v1", conf.http_port),
+            http_base_url: format!("http://localhost:{}/v1", conf.http_port),
+            pageserver,
         }
     }
 
     /// Construct libpq connection string for connecting to this safekeeper.
-    fn safekeeper_connection_config(port: u16) -> PgConnectionConfig {
-        PgConnectionConfig::new_host_port(url::Host::parse("127.0.0.1").unwrap(), port)
-    }
-
-    pub fn datadir_path_by_id(env: &LocalEnv, sk_id: NodeId) -> PathBuf {
-        env.safekeeper_data_dir(&format!("sk{sk_id}"))
+    fn safekeeper_connection_config(port: u16) -> Config {
+        // TODO safekeeper authentication not implemented yet
+        format!("postgresql://no_user@localhost:{}/no_db", port)
+            .parse()
+            .unwrap()
     }
 
     pub fn datadir_path(&self) -> PathBuf {
-        SafekeeperNode::datadir_path_by_id(&self.env, self.id)
+        self.env.safekeeper_data_dir(&self.name)
     }
 
     pub fn pid_file(&self) -> PathBuf {
         self.datadir_path().join("safekeeper.pid")
     }
 
-    pub fn start(&self) -> anyhow::Result<Child> {
+    pub fn start(&self) -> anyhow::Result<()> {
         print!(
             "Starting safekeeper at '{}' in '{}'",
-            self.pg_connection_config.raw_address(),
+            connection_address(&self.pg_connection_config),
             self.datadir_path().display()
         );
         io::stdout().flush().unwrap();
 
-        let listen_pg = format!("127.0.0.1:{}", self.conf.pg_port);
-        let listen_http = format!("127.0.0.1:{}", self.conf.http_port);
-        let id = self.id;
-        let datadir = self.datadir_path();
+        let listen_pg = format!("localhost:{}", self.conf.pg_port);
+        let listen_http = format!("localhost:{}", self.conf.http_port);
 
-        let id_string = id.to_string();
-        // TODO: add availability_zone to the config.
-        // Right now we just specify any value here and use it to check metrics in tests.
-        let availability_zone = format!("sk-{}", id_string);
-
-        let mut args = vec![
-            "-D",
-            datadir.to_str().with_context(|| {
-                format!("Datadir path {datadir:?} cannot be represented as a unicode string")
-            })?,
-            "--id",
-            &id_string,
-            "--listen-pg",
-            &listen_pg,
-            "--listen-http",
-            &listen_http,
-            "--availability-zone",
-            &availability_zone,
-        ];
+        let mut cmd = Command::new(self.env.safekeeper_bin()?);
+        cmd.args(&["-D", self.datadir_path().to_str().unwrap()])
+            .args(&["--listen-pg", &listen_pg])
+            .args(&["--listen-http", &listen_http])
+            .args(&["--recall", "1 second"])
+            .arg("--daemonize")
+            .env_clear()
+            .env("RUST_BACKTRACE", "1");
         if !self.conf.sync {
-            args.push("--no-sync");
+            cmd.arg("--no-sync");
         }
 
-        let broker_endpoint = format!("{}", self.env.broker.client_url());
-        args.extend(["--broker-endpoint", &broker_endpoint]);
-
-        let mut backup_threads = String::new();
-        if let Some(threads) = self.conf.backup_threads {
-            backup_threads = threads.to_string();
-            args.extend(["--backup-threads", &backup_threads]);
-        } else {
-            drop(backup_threads);
+        let var = "LLVM_PROFILE_FILE";
+        if let Some(val) = std::env::var_os(var) {
+            cmd.env(var, val);
         }
 
-        if let Some(ref remote_storage) = self.conf.remote_storage {
-            args.extend(["--remote-storage", remote_storage]);
+        if !cmd.status()?.success() {
+            bail!(
+                "Safekeeper failed to start. See '{}' for details.",
+                self.datadir_path().join("safekeeper.log").display()
+            );
         }
 
-        let key_path = self.env.base_data_dir.join("auth_public_key.pem");
-        if self.conf.auth_enabled {
-            args.extend([
-                "--auth-validation-public-key-path",
-                key_path.to_str().with_context(|| {
-                    format!("Key path {key_path:?} cannot be represented as a unicode string")
-                })?,
-            ]);
+        // It takes a while for the safekeeper to start up. Wait until it is
+        // open for business.
+        const RETRIES: i8 = 15;
+        for retries in 1..RETRIES {
+            match self.check_status() {
+                Ok(_) => {
+                    println!("\nSafekeeper started");
+                    return Ok(());
+                }
+                Err(err) => {
+                    match err {
+                        SafekeeperHttpError::Transport(err) => {
+                            if err.is_connect() && retries < 5 {
+                                print!(".");
+                                io::stdout().flush().unwrap();
+                            } else {
+                                if retries == 5 {
+                                    println!() // put a line break after dots for second message
+                                }
+                                println!(
+                                    "Safekeeper not responding yet, err {} retrying ({})...",
+                                    err, retries
+                                );
+                            }
+                        }
+                        SafekeeperHttpError::Response(msg) => {
+                            bail!("safekeeper failed to start: {} ", msg)
+                        }
+                    }
+                    thread::sleep(Duration::from_secs(1));
+                }
+            }
         }
-
-        background_process::start_process(
-            &format!("safekeeper-{id}"),
-            &datadir,
-            &self.env.safekeeper_bin(),
-            &args,
-            [],
-            background_process::InitialPidFile::Expect(&self.pid_file()),
-            || match self.check_status() {
-                Ok(()) => Ok(true),
-                Err(SafekeeperHttpError::Transport(_)) => Ok(false),
-                Err(e) => Err(anyhow::anyhow!("Failed to check node status: {e}")),
-            },
-        )
+        bail!("safekeeper failed to start in {} seconds", RETRIES);
     }
 
     ///
@@ -185,16 +186,69 @@ impl SafekeeperNode {
     /// If the server is not running, returns success
     ///
     pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
-        background_process::stop_process(
-            immediate,
-            &format!("safekeeper {}", self.id),
-            &self.pid_file(),
-        )
+        let pid_file = self.pid_file();
+        if !pid_file.exists() {
+            println!("Safekeeper {} is already stopped", self.name);
+            return Ok(());
+        }
+        let pid = read_pidfile(&pid_file)?;
+        let pid = Pid::from_raw(pid);
+
+        let sig = if immediate {
+            println!("Stop safekeeper immediately");
+            Signal::SIGQUIT
+        } else {
+            println!("Stop safekeeper gracefully");
+            Signal::SIGTERM
+        };
+        match kill(pid, sig) {
+            Ok(_) => (),
+            Err(Errno::ESRCH) => {
+                println!(
+                    "Safekeeper with pid {} does not exist, but a PID file was found",
+                    pid
+                );
+                return Ok(());
+            }
+            Err(err) => bail!(
+                "Failed to send signal to safekeeper with pid {}: {}",
+                pid,
+                err.desc()
+            ),
+        }
+
+        let address = connection_address(&self.pg_connection_config);
+
+        // TODO Remove this "timeout" and handle it on caller side instead.
+        // Shutting down may take a long time,
+        // if safekeeper flushes a lot of data
+        for _ in 0..100 {
+            if let Err(_e) = TcpStream::connect(&address) {
+                println!("Safekeeper stopped receiving connections");
+
+                //Now check status
+                match self.check_status() {
+                    Ok(_) => {
+                        println!("Safekeeper status is OK. Wait a bit.");
+                        thread::sleep(Duration::from_secs(1));
+                    }
+                    Err(err) => {
+                        println!("Safekeeper status is: {}", err);
+                        return Ok(());
+                    }
+                }
+            } else {
+                println!("Safekeeper still receives connections");
+                thread::sleep(Duration::from_secs(1));
+            }
+        }
+
+        bail!("Failed to stop safekeeper with pid {}", pid);
     }
 
     fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> RequestBuilder {
         // TODO: authentication
-        //if self.env.auth_type == AuthType::NeonJWT {
+        //if self.env.auth_type == AuthType::ZenithJWT {
         //    builder = builder.bearer_auth(&self.env.safekeeper_auth_token)
         //}
         self.http_client.request(method, url)

control_plane/src/storage.rs

@@ -0,0 +1,375 @@
+use std::io::Write;
+use std::net::TcpStream;
+use std::path::PathBuf;
+use std::process::Command;
+use std::time::Duration;
+use std::{io, result, thread};
+
+use anyhow::bail;
+use nix::errno::Errno;
+use nix::sys::signal::{kill, Signal};
+use nix::unistd::Pid;
+use pageserver::http::models::{BranchCreateRequest, TenantCreateRequest};
+use postgres::{Config, NoTls};
+use reqwest::blocking::{Client, RequestBuilder, Response};
+use reqwest::{IntoUrl, Method};
+use thiserror::Error;
+use zenith_utils::http::error::HttpErrorBody;
+use zenith_utils::postgres_backend::AuthType;
+use zenith_utils::zid::ZTenantId;
+
+use crate::local_env::LocalEnv;
+use crate::read_pidfile;
+use pageserver::branches::BranchInfo;
+use pageserver::tenant_mgr::TenantInfo;
+use zenith_utils::connstring::connection_address;
+
+#[derive(Error, Debug)]
+pub enum PageserverHttpError {
+    #[error("Reqwest error: {0}")]
+    Transport(#[from] reqwest::Error),
+
+    #[error("Error: {0}")]
+    Response(String),
+}
+
+type Result<T> = result::Result<T, PageserverHttpError>;
+
+pub trait ResponseErrorMessageExt: Sized {
+    fn error_from_body(self) -> Result<Self>;
+}
+
+impl ResponseErrorMessageExt for Response {
+    fn error_from_body(self) -> Result<Self> {
+        let status = self.status();
+        if !(status.is_client_error() || status.is_server_error()) {
+            return Ok(self);
+        }
+
+        // reqwest do not export it's error construction utility functions, so lets craft the message ourselves
+        let url = self.url().to_owned();
+        Err(PageserverHttpError::Response(
+            match self.json::<HttpErrorBody>() {
+                Ok(err_body) => format!("Error: {}", err_body.msg),
+                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
+            },
+        ))
+    }
+}
+
+//
+// Control routines for pageserver.
+//
+// Used in CLI and tests.
+//
+#[derive(Debug)]
+pub struct PageServerNode {
+    pub pg_connection_config: Config,
+    pub env: LocalEnv,
+    pub http_client: Client,
+    pub http_base_url: String,
+}
+
+impl PageServerNode {
+    pub fn from_env(env: &LocalEnv) -> PageServerNode {
+        let password = if env.pageserver.auth_type == AuthType::ZenithJWT {
+            &env.pageserver.auth_token
+        } else {
+            ""
+        };
+
+        Self {
+            pg_connection_config: Self::pageserver_connection_config(
+                password,
+                &env.pageserver.listen_pg_addr,
+            ),
+            env: env.clone(),
+            http_client: Client::new(),
+            http_base_url: format!("http://{}/v1", env.pageserver.listen_http_addr),
+        }
+    }
+
+    /// Construct libpq connection string for connecting to the pageserver.
+    fn pageserver_connection_config(password: &str, listen_addr: &str) -> Config {
+        format!("postgresql://no_user:{}@{}/no_db", password, listen_addr)
+            .parse()
+            .unwrap()
+    }
+
+    pub fn init(&self, create_tenant: Option<&str>) -> anyhow::Result<()> {
+        let mut cmd = Command::new(self.env.pageserver_bin()?);
+        let var = "LLVM_PROFILE_FILE";
+        if let Some(val) = std::env::var_os(var) {
+            cmd.env(var, val);
+        }
+
+        // FIXME: the paths should be shell-escaped to handle paths with spaces, quotas etc.
+        let mut args = vec![
+            "--init".to_string(),
+            "-D".to_string(),
+            self.env.base_data_dir.display().to_string(),
+            "-c".to_string(),
+            format!("pg_distrib_dir='{}'", self.env.pg_distrib_dir.display()),
+            "-c".to_string(),
+            format!("auth_type='{}'", self.env.pageserver.auth_type),
+            "-c".to_string(),
+            format!(
+                "listen_http_addr='{}'",
+                self.env.pageserver.listen_http_addr
+            ),
+            "-c".to_string(),
+            format!("listen_pg_addr='{}'", self.env.pageserver.listen_pg_addr),
+        ];
+
+        if self.env.pageserver.auth_type != AuthType::Trust {
+            args.extend([
+                "-c".to_string(),
+                "auth_validation_public_key_path='auth_public_key.pem'".to_string(),
+            ]);
+        }
+
+        if let Some(tenantid) = create_tenant {
+            args.extend(["--create-tenant".to_string(), tenantid.to_string()])
+        }
+
+        let status = cmd
+            .args(args)
+            .env_clear()
+            .env("RUST_BACKTRACE", "1")
+            .status()
+            .expect("pageserver init failed");
+
+        if !status.success() {
+            bail!("pageserver init failed");
+        }
+
+        Ok(())
+    }
+
+    pub fn repo_path(&self) -> PathBuf {
+        self.env.pageserver_data_dir()
+    }
+
+    pub fn pid_file(&self) -> PathBuf {
+        self.repo_path().join("pageserver.pid")
+    }
+
+    pub fn start(&self) -> anyhow::Result<()> {
+        print!(
+            "Starting pageserver at '{}' in '{}'",
+            connection_address(&self.pg_connection_config),
+            self.repo_path().display()
+        );
+        io::stdout().flush().unwrap();
+
+        let mut cmd = Command::new(self.env.pageserver_bin()?);
+        cmd.args(&["-D", self.repo_path().to_str().unwrap()])
+            .arg("--daemonize")
+            .env_clear()
+            .env("RUST_BACKTRACE", "1");
+
+        let var = "LLVM_PROFILE_FILE";
+        if let Some(val) = std::env::var_os(var) {
+            cmd.env(var, val);
+        }
+
+        if !cmd.status()?.success() {
+            bail!(
+                "Pageserver failed to start. See '{}' for details.",
+                self.repo_path().join("pageserver.log").display()
+            );
+        }
+
+        // It takes a while for the page server to start up. Wait until it is
+        // open for business.
+        const RETRIES: i8 = 15;
+        for retries in 1..RETRIES {
+            match self.check_status() {
+                Ok(_) => {
+                    println!("\nPageserver started");
+                    return Ok(());
+                }
+                Err(err) => {
+                    match err {
+                        PageserverHttpError::Transport(err) => {
+                            if err.is_connect() && retries < 5 {
+                                print!(".");
+                                io::stdout().flush().unwrap();
+                            } else {
+                                if retries == 5 {
+                                    println!() // put a line break after dots for second message
+                                }
+                                println!(
+                                    "Pageserver not responding yet, err {} retrying ({})...",
+                                    err, retries
+                                );
+                            }
+                        }
+                        PageserverHttpError::Response(msg) => {
+                            bail!("pageserver failed to start: {} ", msg)
+                        }
+                    }
+                    thread::sleep(Duration::from_secs(1));
+                }
+            }
+        }
+        bail!("pageserver failed to start in {} seconds", RETRIES);
+    }
+
+    ///
+    /// Stop the server.
+    ///
+    /// If 'immediate' is true, we use SIGQUIT, killing the process immediately.
+    /// Otherwise we use SIGTERM, triggering a clean shutdown
+    ///
+    /// If the server is not running, returns success
+    ///
+    pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
+        let pid_file = self.pid_file();
+        if !pid_file.exists() {
+            println!("Pageserver is already stopped");
+            return Ok(());
+        }
+        let pid = Pid::from_raw(read_pidfile(&pid_file)?);
+
+        let sig = if immediate {
+            println!("Stop pageserver immediately");
+            Signal::SIGQUIT
+        } else {
+            println!("Stop pageserver gracefully");
+            Signal::SIGTERM
+        };
+        match kill(pid, sig) {
+            Ok(_) => (),
+            Err(Errno::ESRCH) => {
+                println!(
+                    "Pageserver with pid {} does not exist, but a PID file was found",
+                    pid
+                );
+                return Ok(());
+            }
+            Err(err) => bail!(
+                "Failed to send signal to pageserver with pid {}: {}",
+                pid,
+                err.desc()
+            ),
+        }
+
+        let address = connection_address(&self.pg_connection_config);
+
+        // TODO Remove this "timeout" and handle it on caller side instead.
+        // Shutting down may take a long time,
+        // if pageserver checkpoints a lot of data
+        for _ in 0..100 {
+            if let Err(_e) = TcpStream::connect(&address) {
+                println!("Pageserver stopped receiving connections");
+
+                //Now check status
+                match self.check_status() {
+                    Ok(_) => {
+                        println!("Pageserver status is OK. Wait a bit.");
+                        thread::sleep(Duration::from_secs(1));
+                    }
+                    Err(err) => {
+                        println!("Pageserver status is: {}", err);
+                        return Ok(());
+                    }
+                }
+            } else {
+                println!("Pageserver still receives connections");
+                thread::sleep(Duration::from_secs(1));
+            }
+        }
+
+        bail!("Failed to stop pageserver with pid {}", pid);
+    }
+
+    pub fn page_server_psql(&self, sql: &str) -> Vec<postgres::SimpleQueryMessage> {
+        let mut client = self.pg_connection_config.connect(NoTls).unwrap();
+
+        println!("Pageserver query: '{}'", sql);
+        client.simple_query(sql).unwrap()
+    }
+
+    pub fn page_server_psql_client(&self) -> result::Result<postgres::Client, postgres::Error> {
+        self.pg_connection_config.connect(NoTls)
+    }
+
+    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> RequestBuilder {
+        let mut builder = self.http_client.request(method, url);
+        if self.env.pageserver.auth_type == AuthType::ZenithJWT {
+            builder = builder.bearer_auth(&self.env.pageserver.auth_token)
+        }
+        builder
+    }
+
+    pub fn check_status(&self) -> Result<()> {
+        self.http_request(Method::GET, format!("{}/{}", self.http_base_url, "status"))
+            .send()?
+            .error_from_body()?;
+        Ok(())
+    }
+
+    pub fn tenant_list(&self) -> Result<Vec<TenantInfo>> {
+        Ok(self
+            .http_request(Method::GET, format!("{}/{}", self.http_base_url, "tenant"))
+            .send()?
+            .error_from_body()?
+            .json()?)
+    }
+
+    pub fn tenant_create(&self, tenantid: ZTenantId) -> Result<()> {
+        Ok(self
+            .http_request(Method::POST, format!("{}/{}", self.http_base_url, "tenant"))
+            .json(&TenantCreateRequest {
+                tenant_id: tenantid,
+            })
+            .send()?
+            .error_from_body()?
+            .json()?)
+    }
+
+    pub fn branch_list(&self, tenantid: &ZTenantId) -> Result<Vec<BranchInfo>> {
+        Ok(self
+            .http_request(
+                Method::GET,
+                format!("{}/branch/{}", self.http_base_url, tenantid),
+            )
+            .send()?
+            .error_from_body()?
+            .json()?)
+    }
+
+    pub fn branch_create(
+        &self,
+        branch_name: &str,
+        startpoint: &str,
+        tenantid: &ZTenantId,
+    ) -> Result<BranchInfo> {
+        Ok(self
+            .http_request(Method::POST, format!("{}/branch", self.http_base_url))
+            .json(&BranchCreateRequest {
+                tenant_id: tenantid.to_owned(),
+                name: branch_name.to_owned(),
+                start_point: startpoint.to_owned(),
+            })
+            .send()?
+            .error_from_body()?
+            .json()?)
+    }
+
+    pub fn branch_get_by_name(
+        &self,
+        tenantid: &ZTenantId,
+        branch_name: &str,
+    ) -> Result<BranchInfo> {
+        Ok(self
+            .http_request(
+                Method::GET,
+                format!("{}/branch/{}/{}", self.http_base_url, tenantid, branch_name),
+            )
+            .send()?
+            .error_for_status()?
+            .json()?)
+    }
+}

deny.toml

@@ -1,90 +0,0 @@
-# This file was auto-generated using `cargo deny init`.
-# cargo-deny is a cargo plugin that lets you lint your project's
-# dependency graph to ensure all your dependencies conform
-# to your expectations and requirements.
-
-# Root options
-targets = []
-all-features = false
-no-default-features = false
-feature-depth = 1
-
-# This section is considered when running `cargo deny check advisories`
-# More documentation for the advisories section can be found here:
-# https://embarkstudios.github.io/cargo-deny/checks/advisories/cfg.html
-[advisories]
-db-urls = ["https://github.com/rustsec/advisory-db"]
-vulnerability = "deny"
-unmaintained = "warn"
-yanked = "warn"
-notice = "warn"
-ignore = []
-
-# This section is considered when running `cargo deny check licenses`
-# More documentation for the licenses section can be found here:
-# https://embarkstudios.github.io/cargo-deny/checks/licenses/cfg.html
-[licenses]
-unlicensed = "deny"
-allow = [
-    "Apache-2.0",
-    "Artistic-2.0",
-    "BSD-2-Clause",
-    "BSD-3-Clause",
-    "ISC",
-    "MIT",
-    "MPL-2.0",
-    "OpenSSL",
-    "Unicode-DFS-2016",
-]
-deny = []
-copyleft = "warn"
-allow-osi-fsf-free = "neither"
-default = "deny"
-confidence-threshold = 0.8
-exceptions = [
-    # Zlib license has some restrictions if we decide to change sth
-    { allow = ["Zlib"], name = "const_format_proc_macros", version = "*" },
-    { allow = ["Zlib"], name = "const_format", version = "*" },
-]
-
-[[licenses.clarify]]
-name = "ring"
-version = "*"
-expression = "MIT AND ISC AND OpenSSL"
-license-files = [
-    { path = "LICENSE", hash = 0xbd0eed23 }
-]
-
-[licenses.private]
-ignore = true
-registries = []
-
-# This section is considered when running `cargo deny check bans`.
-# More documentation about the 'bans' section can be found here:
-# https://embarkstudios.github.io/cargo-deny/checks/bans/cfg.html
-[bans]
-multiple-versions = "warn"
-wildcards = "allow"
-highlight = "all"
-workspace-default-features = "allow"
-external-default-features = "allow"
-allow = []
-deny = []
-skip = []
-skip-tree = []
-
-# This section is considered when running `cargo deny check sources`.
-# More documentation about the 'sources' section can be found here:
-# https://embarkstudios.github.io/cargo-deny/checks/sources/cfg.html
-[sources]
-unknown-registry = "warn"
-unknown-git = "warn"
-allow-registry = ["https://github.com/rust-lang/crates.io-index"]
-allow-git = []
-
-[sources.allow-org]
-github = [
-    "neondatabase",
-]
-gitlab = []
-bitbucket = []

docker-compose/compute_wrapper/Dockerfile

@@ -1,13 +0,0 @@
-ARG REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com
-ARG COMPUTE_IMAGE=compute-node-v14
-ARG TAG=latest
-
-FROM $REPOSITORY/${COMPUTE_IMAGE}:$TAG
-
-USER root
-RUN apt-get update &&       \
-    apt-get install -y curl \
-                       jq   \
-                       netcat
-
-USER postgres

docker-compose/compute_wrapper/shell/compute.sh

@@ -1,56 +0,0 @@
-#!/bin/bash
-set -eux
-
-# Generate a random tenant or timeline ID
-#
-# Takes a variable name as argument. The result is stored in that variable.
-generate_id() {
-    local -n resvar=$1
-    printf -v resvar '%08x%08x%08x%08x' $SRANDOM $SRANDOM $SRANDOM $SRANDOM
-}
-
-PG_VERSION=${PG_VERSION:-14}
-
-SPEC_FILE_ORG=/var/db/postgres/specs/spec.json
-SPEC_FILE=/tmp/spec.json
-
-echo "Waiting pageserver become ready."
-while ! nc -z pageserver 6400; do
-     sleep 1;
-done
-echo "Page server is ready."
-
-echo "Create a tenant and timeline"
-generate_id tenant_id
-PARAMS=(
-     -sb 
-     -X POST
-     -H "Content-Type: application/json"
-     -d "{\"new_tenant_id\": \"${tenant_id}\"}"
-     http://pageserver:9898/v1/tenant/
-)
-result=$(curl "${PARAMS[@]}")
-echo $result | jq .
-
-generate_id timeline_id
-PARAMS=(
-     -sb 
-     -X POST
-     -H "Content-Type: application/json"
-     -d "{\"new_timeline_id\": \"${timeline_id}\", \"pg_version\": ${PG_VERSION}}"
-     "http://pageserver:9898/v1/tenant/${tenant_id}/timeline/"
-)
-result=$(curl "${PARAMS[@]}")
-echo $result | jq .
-
-echo "Overwrite tenant id and timeline id in spec file"
-sed "s/TENANT_ID/${tenant_id}/" ${SPEC_FILE_ORG} > ${SPEC_FILE}
-sed -i "s/TIMELINE_ID/${timeline_id}/" ${SPEC_FILE}
-
-cat ${SPEC_FILE}
-
-echo "Start compute node"
-/usr/local/bin/compute_ctl --pgdata /var/db/postgres/compute \
-     -C "postgresql://cloud_admin@localhost:55433/postgres"  \
-     -b /usr/local/bin/postgres                              \
-     -S ${SPEC_FILE}

docker-compose/compute_wrapper/var/db/postgres/specs/spec.json

@@ -1,136 +0,0 @@
-{
-    "format_version": 1.0,
-
-    "timestamp": "2022-10-12T18:00:00.000Z",
-    "operation_uuid": "0f657b36-4b0f-4a2d-9c2e-1dcd615e7d8c",
-
-    "cluster": {
-        "cluster_id": "docker_compose",
-        "name": "docker_compose_test",
-        "state": "restarted",
-        "roles": [
-            {
-                "name": "cloud_admin",
-                "encrypted_password": "b093c0d3b281ba6da1eacc608620abd8",
-                "options": null
-            }
-        ],
-        "databases": [
-        ],
-        "settings": [
-            {
-                "name": "fsync",
-                "value": "off",
-                "vartype": "bool"
-            },
-            {
-                "name": "wal_level",
-                "value": "replica",
-                "vartype": "enum"
-            },
-            {
-                "name": "wal_log_hints",
-                "value": "on",
-                "vartype": "bool"
-            },
-            {
-                "name": "log_connections",
-                "value": "on",
-                "vartype": "bool"
-            },
-            {
-                "name": "port",
-                "value": "55433",
-                "vartype": "integer"
-            },
-            {
-                "name": "shared_buffers",
-                "value": "1MB",
-                "vartype": "string"
-            },
-            {
-                "name": "max_connections",
-                "value": "100",
-                "vartype": "integer"
-            },
-            {
-                "name": "listen_addresses",
-                "value": "0.0.0.0",
-                "vartype": "string"
-            },
-            {
-                "name": "max_wal_senders",
-                "value": "10",
-                "vartype": "integer"
-            },
-            {
-                "name": "max_replication_slots",
-                "value": "10",
-                "vartype": "integer"
-            },
-            {
-                "name": "wal_sender_timeout",
-                "value": "5s",
-                "vartype": "string"
-            },
-            {
-                "name": "wal_keep_size",
-                "value": "0",
-                "vartype": "integer"
-            },
-            {
-                "name": "password_encryption",
-                "value": "md5",
-                "vartype": "enum"
-            },
-            {
-                "name": "restart_after_crash",
-                "value": "off",
-                "vartype": "bool"
-            },
-            {
-                "name": "synchronous_standby_names",
-                "value": "walproposer",
-                "vartype": "string"
-            },
-            {
-                "name": "shared_preload_libraries",
-                "value": "neon",
-                "vartype": "string"
-            },
-            {
-                "name": "neon.safekeepers",
-                "value": "safekeeper1:5454,safekeeper2:5454,safekeeper3:5454",
-                "vartype": "string"
-            },
-            {
-                "name": "neon.timeline_id",
-                "value": "TIMELINE_ID",
-                "vartype": "string"
-            },
-            {
-                "name": "neon.tenant_id",
-                "value": "TENANT_ID",
-                "vartype": "string"
-            },
-            {
-                "name": "neon.pageserver_connstring",
-                "value": "host=pageserver port=6400",
-                "vartype": "string"
-            },
-            {
-                "name": "max_replication_write_lag",
-                "value": "500MB",
-                "vartype": "string"
-            },
-            {
-                "name": "max_replication_flush_lag",
-                "value": "10GB",
-                "vartype": "string"
-            }
-        ]
-    },
-
-    "delta_operations": [
-    ]
-}

docker-compose/docker-compose.yml

@@ -1,196 +0,0 @@
-version: '3'
-
-services:
-  minio:
-    restart: always
-    image: quay.io/minio/minio:RELEASE.2022-10-20T00-55-09Z
-    ports:
-      - 9000:9000
-      - 9001:9001
-    environment:
-      - MINIO_ROOT_USER=minio
-      - MINIO_ROOT_PASSWORD=password
-    command: server /data --address :9000 --console-address ":9001"
-
-  minio_create_buckets:
-    image: minio/mc
-    environment:
-      - MINIO_ROOT_USER=minio
-      - MINIO_ROOT_PASSWORD=password
-    entrypoint:
-      - "/bin/sh"
-      - "-c"
-    command:
-      - "until (/usr/bin/mc alias set minio http://minio:9000 $$MINIO_ROOT_USER $$MINIO_ROOT_PASSWORD) do
-             echo 'Waiting to start minio...' && sleep 1;
-         done;
-         /usr/bin/mc mb minio/neon --region=eu-north-1;
-         exit 0;"
-    depends_on:
-      - minio
-
-  pageserver:
-    restart: always
-    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
-    environment:
-      - BROKER_ENDPOINT='http://storage_broker:50051'
-      - AWS_ACCESS_KEY_ID=minio
-      - AWS_SECRET_ACCESS_KEY=password
-      #- RUST_BACKTRACE=1
-    ports:
-       #- 6400:6400  # pg protocol handler
-       - 9898:9898 # http endpoints
-    entrypoint:
-      - "/bin/sh"
-      - "-c"
-    command:
-      - "/usr/local/bin/pageserver -D /data/.neon/
-                                   -c \"broker_endpoint=$$BROKER_ENDPOINT\"
-                                   -c \"listen_pg_addr='0.0.0.0:6400'\"
-                                   -c \"listen_http_addr='0.0.0.0:9898'\"
-                                   -c \"remote_storage={endpoint='http://minio:9000',
-                                                        bucket_name='neon',
-                                                        bucket_region='eu-north-1',
-                                                        prefix_in_bucket='/pageserver/'}\""
-    depends_on:
-      - storage_broker
-      - minio_create_buckets
-
-  safekeeper1:
-    restart: always
-    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
-    environment:
-      - SAFEKEEPER_ADVERTISE_URL=safekeeper1:5454
-      - SAFEKEEPER_ID=1
-      - BROKER_ENDPOINT=http://storage_broker:50051
-      - AWS_ACCESS_KEY_ID=minio
-      - AWS_SECRET_ACCESS_KEY=password
-      #- RUST_BACKTRACE=1
-    ports:
-      #- 5454:5454 # pg protocol handler
-      - 7676:7676 # http endpoints
-    entrypoint:
-      - "/bin/sh"
-      - "-c"
-    command:
-      - "safekeeper --listen-pg=$$SAFEKEEPER_ADVERTISE_URL
-                    --listen-http='0.0.0.0:7676'
-                    --id=$$SAFEKEEPER_ID
-                    --broker-endpoint=$$BROKER_ENDPOINT
-                    -D /data
-                    --remote-storage=\"{endpoint='http://minio:9000',
-                                        bucket_name='neon',
-                                        bucket_region='eu-north-1',
-                                        prefix_in_bucket='/safekeeper/'}\""
-    depends_on:
-      - storage_broker
-      - minio_create_buckets
-
-  safekeeper2:
-    restart: always
-    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
-    environment:
-      - SAFEKEEPER_ADVERTISE_URL=safekeeper2:5454
-      - SAFEKEEPER_ID=2
-      - BROKER_ENDPOINT=http://storage_broker:50051
-      - AWS_ACCESS_KEY_ID=minio
-      - AWS_SECRET_ACCESS_KEY=password
-      #- RUST_BACKTRACE=1
-    ports:
-      #- 5454:5454 # pg protocol handler
-      - 7677:7676 # http endpoints
-    entrypoint:
-      - "/bin/sh"
-      - "-c"
-    command:
-      - "safekeeper --listen-pg=$$SAFEKEEPER_ADVERTISE_URL
-                    --listen-http='0.0.0.0:7676'
-                    --id=$$SAFEKEEPER_ID
-                    --broker-endpoint=$$BROKER_ENDPOINT
-                    -D /data
-                    --remote-storage=\"{endpoint='http://minio:9000',
-                                        bucket_name='neon',
-                                        bucket_region='eu-north-1',
-                                        prefix_in_bucket='/safekeeper/'}\""
-    depends_on:
-      - storage_broker
-      - minio_create_buckets
-
-  safekeeper3:
-    restart: always
-    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
-    environment:
-      - SAFEKEEPER_ADVERTISE_URL=safekeeper3:5454
-      - SAFEKEEPER_ID=3
-      - BROKER_ENDPOINT=http://storage_broker:50051
-      - AWS_ACCESS_KEY_ID=minio
-      - AWS_SECRET_ACCESS_KEY=password
-      #- RUST_BACKTRACE=1
-    ports:
-      #- 5454:5454 # pg protocol handler
-      - 7678:7676 # http endpoints
-    entrypoint:
-      - "/bin/sh"
-      - "-c"
-    command:
-      - "safekeeper --listen-pg=$$SAFEKEEPER_ADVERTISE_URL
-                    --listen-http='0.0.0.0:7676'
-                    --id=$$SAFEKEEPER_ID
-                    --broker-endpoint=$$BROKER_ENDPOINT
-                    -D /data
-                    --remote-storage=\"{endpoint='http://minio:9000',
-                                        bucket_name='neon',
-                                        bucket_region='eu-north-1',
-                                        prefix_in_bucket='/safekeeper/'}\""
-    depends_on:
-      - storage_broker
-      - minio_create_buckets
-
-  storage_broker:
-    restart: always
-    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
-    ports:
-      - 50051:50051
-    command:
-      - "storage_broker"
-      - "--listen-addr=0.0.0.0:50051"
-
-  compute:
-    restart: always
-    build:
-      context: ./compute_wrapper/
-      args:
-        - REPOSITORY=${REPOSITORY:-neondatabase}
-        - COMPUTE_IMAGE=compute-node-v${PG_VERSION:-14}
-        - TAG=${TAG:-latest}
-        - http_proxy=$http_proxy
-        - https_proxy=$https_proxy
-    environment:
-      - PG_VERSION=${PG_VERSION:-14}
-      #- RUST_BACKTRACE=1
-    # Mount the test files directly, for faster editing cycle.
-    volumes:
-      - ./compute_wrapper/var/db/postgres/specs/:/var/db/postgres/specs/
-      - ./compute_wrapper/shell/:/shell/
-    ports:
-      - 55433:55433 # pg protocol handler
-      - 3080:3080 # http endpoints
-    entrypoint:
-      - "/shell/compute.sh"
-    depends_on:
-      - safekeeper1
-      - safekeeper2
-      - safekeeper3
-      - pageserver
-
-  compute_is_ready:
-    image: postgres:latest
-    entrypoint:
-      - "/bin/bash"
-      - "-c"
-    command:
-      - "until pg_isready -h compute -p 55433 ; do
-            echo 'Waiting to start compute...' && sleep 1;
-         done"
-    depends_on:
-      - compute

docker-compose/docker_compose_test.sh

@@ -1,60 +0,0 @@
-#!/bin/bash
-
-# A basic test to ensure Docker images are built correctly.
-# Build a wrapper around the compute, start all services and runs a simple SQL query.
-# Repeats the process for all currenly supported Postgres versions.
-
-# Implicitly accepts `REPOSITORY` and `TAG` env vars that are passed into the compose file
-# Their defaults point at DockerHub `neondatabase/neon:latest` image.`,
-# to verify custom image builds (e.g pre-published ones).
-
-# XXX: Current does not work on M1 macs due to x86_64 Docker images compiled only, and no seccomp support in M1 Docker emulation layer.
-
-set -eux -o pipefail
-
-SCRIPT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
-COMPOSE_FILE=$SCRIPT_DIR/docker-compose.yml
-
-COMPUTE_CONTAINER_NAME=docker-compose-compute-1
-SQL="CREATE TABLE t(key int primary key, value text); insert into t values(1,1); select * from t;"
-PSQL_OPTION="-h localhost -U cloud_admin -p 55433 -c '$SQL' postgres"
-
-cleanup() {
-    echo "show container information"
-    docker ps
-    docker compose -f $COMPOSE_FILE logs
-    echo "stop containers..."
-    docker compose -f $COMPOSE_FILE down
-}
-
-echo "clean up containers if exists"
-cleanup
-
-for pg_version in 14 15; do
-    echo "start containers (pg_version=$pg_version)."
-    PG_VERSION=$pg_version docker compose -f $COMPOSE_FILE up --build -d
-
-    echo "wait until the compute is ready. timeout after 60s. "
-    cnt=0
-    while sleep 1; do
-        # check timeout
-        cnt=`expr $cnt + 1`
-        if [ $cnt -gt 60 ]; then
-            echo "timeout before the compute is ready."
-            cleanup
-            exit 1
-        fi
-
-        # check if the compute is ready
-        set +o pipefail
-        result=`docker compose -f $COMPOSE_FILE logs "compute_is_ready" | grep "accepting connections" | wc -l`
-        set -o pipefail
-        if [ $result -eq 1 ]; then
-            echo "OK. The compute is ready to connect."
-            echo "execute simple queries."
-            docker exec $COMPUTE_CONTAINER_NAME /bin/bash -c "psql $PSQL_OPTION"
-            cleanup
-            break
-        fi
-    done
-done

docker-entrypoint.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+set -eux
+
+if [ "$1" = 'pageserver' ]; then
+    if [ ! -d "/data/tenants" ]; then
+        echo "Initializing pageserver data directory"
+        pageserver --init -D /data -c "pg_distrib_dir='/usr/local'"
+    fi
+    echo "Staring pageserver at 0.0.0.0:6400"
+    pageserver -c "listen_pg_addr='0.0.0.0:6400'" -c "listen_http_addr='0.0.0.0:9898'" -D /data
+else
+    "$@"
+fi

docs/.gitignore

@@ -1 +0,0 @@
-book

docs/README.md

@@ -0,0 +1,14 @@
+# Zenith documentation
+
+## Table of contents
+
+- [authentication.md](authentication.md) — pageserver JWT authentication.
+- [docker.md](docker.md) — Docker images and building pipeline.
+- [glossary.md](glossary.md) — Glossary of all the terms used in codebase.
+- [multitenancy.md](multitenancy.md) — how multitenancy is organized in the pageserver and Zenith CLI.
+- [sourcetree.md](sourcetree.md) — Overview of the source tree layeout.
+- [pageserver/README](/pageserver/README) — pageserver overview.
+- [postgres_ffi/README](/postgres_ffi/README) — Postgres FFI overview.
+- [test_runner/README.md](/test_runner/README.md) — tests infrastructure overview.
+- [walkeeper/README](/walkeeper/README) — WAL service overview.
+- [core_changes.md](core_changes.md) - Description of Zenith changes in Postgres core

docs/SUMMARY.md

@@ -1,85 +0,0 @@
-# Summary
-
-[Introduction]()
-- [Separation of Compute and Storage](./separation-compute-storage.md)
-
-# Architecture
-
-- [Compute]()
-  - [WAL proposer]()
-  - [WAL Backpressure]()
-  - [Postgres changes](./core_changes.md)
-
-- [Pageserver](./pageserver.md)
-    - [Services](./pageserver-services.md)
-    - [Thread management](./pageserver-thread-mgmt.md)
-    - [WAL Redo](./pageserver-walredo.md)
-    - [Page cache](./pageserver-pagecache.md)
-    - [Storage](./pageserver-storage.md)
-        - [Datadir mapping]()
-        - [Layer files]()
-        - [Branching]()
-        - [Garbage collection]()
-    - [Cloud Storage]()
-    - [Processing a GetPage request](./pageserver-processing-getpage.md)
-    - [Processing WAL](./pageserver-processing-wal.md)
-	- [Management API]()
-	- [Tenant Rebalancing]()
-
-- [WAL Service](walservice.md)
-  - [Consensus protocol](safekeeper-protocol.md)
-  - [Management API]()
-  - [Rebalancing]()
-
-- [Control Plane]()
-
-- [Proxy]()
-
-- [Source view](./sourcetree.md)
-  - [docker.md](./docker.md) — Docker images and building pipeline.
-  - [Error handling and logging](./error-handling.md)
-  - [Testing]()
-    - [Unit testing]()
-    - [Integration testing]()
-    - [Benchmarks]()
-
-
-- [Glossary](./glossary.md)
-
-# Uncategorized
-
-- [authentication.md](./authentication.md)
-- [multitenancy.md](./multitenancy.md) — how multitenancy is organized in the pageserver and Zenith CLI.
-- [settings.md](./settings.md)
-#FIXME: move these under sourcetree.md
-#- [postgres_ffi/README.md](/libs/postgres_ffi/README.md)
-#- [test_runner/README.md](/test_runner/README.md)
-
-
-# RFCs
-
-- [RFCs](./rfcs/README.md)
-
-- [002-storage](rfcs/002-storage.md)
-- [003-laptop-cli](rfcs/003-laptop-cli.md)
-- [004-durability](rfcs/004-durability.md)
-- [005-zenith_local](rfcs/005-zenith_local.md)
-- [006-laptop-cli-v2-CLI](rfcs/006-laptop-cli-v2-CLI.md)
-- [006-laptop-cli-v2-repository-structure](rfcs/006-laptop-cli-v2-repository-structure.md)
-- [007-serverless-on-laptop](rfcs/007-serverless-on-laptop.md)
-- [008-push-pull](rfcs/008-push-pull.md)
-- [009-snapshot-first-storage-cli](rfcs/009-snapshot-first-storage-cli.md)
-- [009-snapshot-first-storage](rfcs/009-snapshot-first-storage.md)
-- [009-snapshot-first-storage-pitr](rfcs/009-snapshot-first-storage-pitr.md)
-- [010-storage_details](rfcs/010-storage_details.md)
-- [011-retention-policy](rfcs/011-retention-policy.md)
-- [012-background-tasks](rfcs/012-background-tasks.md)
-- [013-term-history](rfcs/013-term-history.md)
-- [014-safekeepers-gossip](rfcs/014-safekeepers-gossip.md)
-- [014-storage-lsm](rfcs/014-storage-lsm.md)
-- [015-storage-messaging](rfcs/015-storage-messaging.md)
-- [016-connection-routing](rfcs/016-connection-routing.md)
-- [017-timeline-data-management](rfcs/017-timeline-data-management.md)
-- [018-storage-messaging-2](rfcs/018-storage-messaging-2.md)
-- [019-tenant-timeline-lifecycles](rfcs/019-tenant-timeline-lifecycles.md)
-- [cluster-size-limits](rfcs/cluster-size-limits.md)

docs/authentication.md

@@ -1,200 +1,30 @@
 ## Authentication
 
 ### Overview
-We use JWT tokens in communication between almost all components (compute, pageserver, safekeeper, CLI) regardless of the protocol used (HTTP/PostgreSQL).
-storage_broker currently has no authentication.
-Authentication is optional and is disabled by default for easier debugging.
-It is used in some tests, though.
-Note that we do not cover authentication with `pg.neon.tech` here.
 
-For HTTP connections we use the Bearer authentication scheme.
-For PostgreSQL connections we expect the token to be passed as a password.
-There is a caveat for `psql`: it silently truncates passwords to 100 symbols, so to correctly pass JWT via `psql` you have to either use `PGPASSWORD` environment variable, or store password in `psql`'s config file.
-
-Current token scopes are described in `utils::auth::Scope`.
-There are no expiration or rotation schemes.
-
-_TODO_: some scopes allow both access to server management API and to the data.
-These probably should be split into multiple scopes.
-
-Tokens should not occur in logs.
-They may sometimes occur in configuration files, although this is discouraged
-because configs may be parsed and dumped into logs.
-
-#### Tokens generation and validation
-JWT tokens are signed using a private key.
-Compute/pageserver/safekeeper use the private key's public counterpart to validate JWT tokens.
-These components should not have access to the private key and may only get tokens from their configuration or external clients. 
-
-The key pair is generated once for an installation of compute/pageserver/safekeeper, e.g. by `neon_local init`.
-There is currently no way to rotate the key without bringing down all components.
-
-### Best practices
-
-See [RFC 8725: JSON Web Token Best Current Practices](https://www.rfc-editor.org/rfc/rfc8725)
-
-
-### Token format
-
-The JWT tokens in Neon use "EdDSA" as the algorithm (defined in [RFC8037](https://www.rfc-editor.org/rfc/rfc8037)).
-
-Example:
-
-Header:
-
-```
-{
-  "alg": "EdDSA",
-  "typ": "JWT"
-}
-```
-
-Payload:
-
-```
-{
-  "scope": "tenant",  # "tenant", "pageserverapi", or "safekeeperdata"
-  "tenant_id": "5204921ff44f09de8094a1390a6a50f6",
-}
-```
-
-
-Meanings of scope:
-
-"tenant": Provides access to all data for a specific tenant
-
-"pageserverapi": Provides blanket access to all tenants on the pageserver plus pageserver-wide APIs.
-Should only be used e.g. for status check/tenant creation/list.
-
-"safekeeperdata": Provides blanket access to all data on the safekeeper plus safekeeper-wide APIs.
-Should only be used e.g. for status check.
-Currently also used for connection from any pageserver to any safekeeper.
-
-
-### CLI
-CLI generates a key pair during call to `neon_local init` with the following commands:
+Current state of authentication includes usage of JWT tokens in communication between compute and pageserver and between CLI and pageserver. JWT token is signed using RSA keys. CLI generates a key pair during call to `zenith init`. Using following openssl commands:
 
 ```bash
-openssl genpkey -algorithm ed25519 -out auth_private_key.pem
-openssl pkey -in auth_private_key.pem -pubout -out auth_public_key.pem
+openssl genrsa -out private_key.pem 2048
+openssl rsa -in private_key.pem -pubout -outform PEM -out public_key.pem
 ```
 
-Configuration files for all components point to `public_key.pem` for JWT validation.
-However, authentication is disabled by default.
-There is no way to automatically enable it everywhere, you have to configure each component individually.
+CLI also generates signed token and saves it in the config for later access to pageserver. Now authentication is optional. Pageserver has two variables in config: `auth_validation_public_key_path` and `auth_type`, so when auth type present and set to `ZenithJWT` pageserver will require authentication for connections. Actual JWT is passed in password field of connection string. There is a caveat for psql, it silently truncates passwords to 100 symbols, so to correctly pass JWT via psql you have to either use PGPASSWORD environment variable, or store password in psql config file.
 
-CLI also generates signed token (full access to Pageserver) and saves it in
-the CLI's `config` file under `pageserver.auth_token`.
-Note that pageserver's config does not have any similar parameter.
-CLI is the only component which accesses that token.
-Technically it could generate it from the private key on each run,
-but it does not do that for some reason (_TODO_).
+Currently there is no authentication between compute and safekeepers, because this communication layer is under heavy refactoring. After this refactoring support for authentication will be added there too. Now safekeeper supports "hardcoded" token passed via environment variable to be able to use callmemaybe command in pageserver.
 
-### Compute
-#### Overview
-Compute is a per-timeline PostgreSQL instance, so it should not have
-any access to data of other tenants.
-All tokens used by a compute are restricted to a specific tenant.
-There is no auth isolation from other timelines of the same tenant,
-but a non-rogue client never accesses another timeline even by an accident:
-timeline IDs are random and hard to guess.
+Compute uses token passed via environment variable to communicate to pageserver and in the future to the safekeeper too.
 
-#### Incoming connections
-All incoming connections are from PostgreSQL clients.
-Their authentication is just plain PostgreSQL authentication and out of scope for this document.
+JWT authentication now supports two scopes: tenant and pageserverapi. Tenant scope is intended for use in tenant related api calls, e.g. create_branch. Compute launched for particular tenant also uses this scope. Scope pageserver api is intended to be used by console to manage pageserver. For now we have only one management operation - create tenant.
 
-There is no administrative API except those provided by PostgreSQL.
-
-#### Outgoing connections
-Compute connects to Pageserver for getting pages. The connection string is
-configured by the `neon.pageserver_connstring` PostgreSQL GUC,
-e.g. `postgresql://no_user@localhost:15028`. If the `$NEON_AUTH_TOKEN`
-environment variable is set, it is used as the password for the connection. (The
-pageserver uses JWT tokens for authentication, so the password is really a
-token.)
-
-Compute connects to Safekeepers to write and commit data. The list of safekeeper
-addresses is given in the `neon.safekeepers` GUC. The connections to the
-safekeepers take the password from the `$NEON_AUTH_TOKEN` environment
-variable, if set.
-
-The `compute_ctl` binary that runs before the PostgreSQL server, and launches
-PostgreSQL, also makes a connection to the pageserver. It uses it to fetch the
-initial "base backup" dump, to initialize the PostgreSQL data directory. It also
-uses `$NEON_AUTH_TOKEN` as the password for the connection.
-
-### Pageserver
-#### Overview
-Pageserver keeps track of multiple tenants, each having multiple timelines.
-For each timeline, it connects to the corresponding Safekeeper.
-Information about "corresponding Safekeeper" is published by Safekeepers
-in the storage_broker, but they do not publish access tokens, otherwise what is
-the point of authentication.
-
-Pageserver keeps a connection to some set of Safekeepers, which
-may or may not correspond to active Computes.
-Hence, we cannot obtain a per-timeline access token from a Compute.
-E.g. if the timeline's Compute terminates before all WAL is
-consumed by the Pageserver, the Pageserver continues consuming WAL.
-
-Pageserver replicas' authentication is the same as the main's.
-
-#### Incoming connections
-Pageserver listens for connections from computes.
-Each compute should present a token valid for the timeline's tenant.
-
-Pageserver also has HTTP API: some parts are per-tenant,
-some parts are server-wide, these are different scopes.
-
-Authentication can be enabled separately for the HTTP mgmt API, and
-for the libpq connections from compute. The `http_auth_type` and
-`pg_auth_type` configuration variables in Pageserver's config may
-have one of these values:
-
-* `Trust` removes all authentication.
-* `NeonJWT` enables JWT validation.
-   Tokens are validated using the public key which lies in a PEM file
-   specified in the `auth_validation_public_key_path` config.
-
-#### Outgoing connections
-Pageserver makes a connection to a Safekeeper for each active timeline.
-As Pageserver may want to access any timeline it has on the disk,
-it is given a blanket JWT token to access any data on any Safekeeper.
-This token is passed through an environment variable called `NEON_AUTH_TOKEN`
-(non-configurable as of writing this text).
-
-A better way _may be_ to store JWT token for each timeline next to it,
-but may be not.
-
-### Safekeeper
-#### Overview
-Safekeeper keeps track of multiple tenants, each having multiple timelines.
-
-#### Incoming connections
-Safekeeper accepts connections from Compute/Pageserver, each
-connection corresponds to a specific timeline and requires
-a corresponding JWT token.
-
-Safekeeper also has HTTP API: some parts are per-tenant,
-some parts are server-wide, these are different scopes.
-
-The `auth-validation-public-key-path` command line options controls
-the authentication mode:
-
-* If the option is missing, there is no authentication or JWT token validation.
-* If the option is present, it should be a path to the public key PEM file used for JWT token validation.
-
-#### Outgoing connections
-No connections are initiated by a Safekeeper.
-
-### In the source code
-Tests do not use authentication by default.
-If you need it, you can enable it by configuring the test's environment:
+Examples for token generation in python:
 
 ```python
-neon_env_builder.auth_enabled = True
+# generate pageserverapi token
+management_token = jwt.encode({"scope": "pageserverapi"}, auth_keys.priv, algorithm="RS256")
+
+# generate tenant token
+tenant_token = jwt.encode({"scope": "tenant", "tenant_id": ps.initial_tenant}, auth_keys.priv, algorithm="RS256")
 ```
 
-You will have to generate tokens if you want to access components inside the test directly,
-use `AuthKeys.generate_*_token` methods for that.
-If you create a new scope, please create a new method to prevent mistypes in scope's name.
+Utility functions to work with jwts in rust are located in zenith_utils/src/auth.rs

docs/book.toml

@@ -1,5 +0,0 @@
-[book]
-language = "en"
-multilingual = false
-src = "."
-title = "Neon architecture"

docs/consumption_metrics.md

@@ -1,115 +0,0 @@
-### Overview
-Pageserver and proxy periodically collect consumption metrics and push them to a HTTP endpoint.
-
-This doc describes current implementation details.
-For design details see [the RFC](./rfcs/021-metering.md) and [the discussion on Github](https://github.com/neondatabase/neon/pull/2884).
-
-- The metrics are collected in a separate thread, and the collection interval and endpoint are configurable.
-
-- Metrics are cached, so that we don't send unchanged metrics on every iteration.
-
-- Metrics are sent in batches of 1000 (see CHUNK_SIZE const) metrics max with no particular grouping guarantees.
-
-batch format is
-```json
-
-{ "events" : [metric1, metric2, ...]]}
-
-```
-See metric format examples below.
-
-- All metrics values are in bytes, unless otherwise specified.
-
-- Currently no retries are implemented.
-
-### Pageserver metrics
-
-#### Configuration
-The endpoint and the collection interval are specified in the pageserver config file (or can be passed as command line arguments):
-`metric_collection_endpoint` defaults to None, which means that metric collection is disabled by default.
-`metric_collection_interval` defaults to 10min
-
-#### Metrics
-
-Currently, the following metrics are collected:
-
-- `written_size`
-
-Amount of WAL produced , by a timeline, i.e. last_record_lsn
-This is an absolute, per-timeline metric.
-
-- `resident_size`
-
-Size of all the layer files in the tenant's directory on disk on the pageserver.
-This is an absolute, per-tenant metric.
-
-- `remote_storage_size`
-
-Size of the remote storage (S3) directory.
-This is an absolute, per-tenant metric.
-
-- `timeline_logical_size`
-Logical size of the data in the timeline
-This is an absolute, per-timeline metric.
-
-- `synthetic_storage_size`
-Size of all tenant's branches including WAL
-This is the same metric that `tenant/{tenant_id}/size` endpoint returns.
-This is an absolute, per-tenant metric.
-
-Synthetic storage size is calculated in a separate thread, so it might be slightly outdated.
-
-#### Format example
-
-```json
-{
-"metric": "remote_storage_size",
-"type": "absolute",
-"time": "2022-12-28T11:07:19.317310284Z",
-"idempotency_key": "2022-12-28 11:07:19.317310324 UTC-1-4019",
-"value": 12345454,
-"tenant_id": "5d07d9ce9237c4cd845ea7918c0afa7d",
-"timeline_id": "a03ebb4f5922a1c56ff7485cc8854143",
-}
-```
-
-`idempotency_key` is a unique key for each metric, so that we can deduplicate metrics.
-It is a combination of the time, node_id and a random number.
-
-### Proxy consumption metrics
-
-#### Configuration
-The endpoint and the collection interval can be passed as command line arguments for proxy:
-`metric_collection_endpoint` no default, which means that metric collection is disabled by default.
-`metric_collection_interval` no default
-
-#### Metrics
-
-Currently, only one proxy metric is collected:
-
-- `proxy_io_bytes_per_client`
-Outbound traffic per client.
-This is an incremental, per-endpoint metric.
-
-#### Format example
-
-```json
-{
-"metric": "proxy_io_bytes_per_client",
-"type": "incremental",
-"start_time": "2022-12-28T11:07:19.317310284Z",
-"stop_time": "2022-12-28T11:07:19.317310284Z",
-"idempotency_key": "2022-12-28 11:07:19.317310324 UTC-1-4019",
-"value": 12345454,
-"endpoint_id": "5d07d9ce9237c4cd845ea7918c0afa7d",
-}
-```
-
-The metric is incremental, so the value is the difference between the current and the previous value.
-If there is no previous value, the value, the value is the current value and the `start_time` equals `stop_time`.
-
-### TODO
-
-- [ ] Handle errors better: currently if one tenant fails to gather metrics, the whole iteration fails and metrics are not sent for any tenant.
-- [ ] Add retries
-- [ ] Tune the interval

docs/core_changes.md

@@ -1,494 +1,202 @@
-# Postgres core changes
+1. Add t_cid to XLOG record
+- Why?
+  The cmin/cmax on a heap page is a real bummer. I don't see any other way to fix that than bite the bullet and modify the WAL-logging routine to include the cmin/cmax.
 
-This lists all the changes that have been made to the PostgreSQL
-source tree, as a somewhat logical set of patches. The long-term goal
-is to eliminate all these changes, by submitting patches to upstream
-and refactoring code into extensions, so that you can run unmodified
-PostgreSQL against Neon storage.
+  To recap, the problem is that the XLOG_HEAP_INSERT record does not include the command id of the inserted row. And same with deletion/update. So in the primary, a row is inserted with current xmin + cmin. But in the replica, the cmin is always set to 1. That works, because the command id is only relevant to the inserting transaction itself. After commit/abort, no one cares abut it anymore.
 
-In Neon, we run PostgreSQL in the compute nodes, but we also run a special WAL redo process in the
-page server. We currently use the same binary for both, with --wal-redo runtime flag to launch it in
-the WAL redo mode. Some PostgreSQL changes are needed in the compute node, while others are just for
-the WAL redo process.
+- Alternatives?
+  I don't know
 
-In addition to core PostgreSQL changes, there is a Neon extension in contrib/neon, to hook into the
-smgr interface. Once all the core changes have been submitted to upstream or eliminated some other
-way, the extension could live outside the postgres repository and build against vanilla PostgreSQL.
+2. Add PD_WAL_LOGGED.
+- Why?
+  Postgres sometimes writes data to the page before it is wal-logged. If such page ais swapped out, we  will loose this change. The problem is currently solved by setting PD_WAL_LOGGED bit in page header. When page without this bit set is written to the SMGR, then it is forced to be written to the WAL as FPI using log_newpage_copy() function.
 
-Below is a list of all the PostgreSQL source code changes, categorized into changes needed for
-compute, and changes needed for the WAL redo process:
+  There was wrong assumption that it can happen only during construction of some exotic indexes (like gist). It is not true. The same situation can happen with COPY,VACUUM and when record hint bits are set.
 
-# Changes for Compute node
+- Discussion:
+  https://discord.com/channels/869525774699462656/882681420986851359
 
-## Add t_cid to heap WAL records
+- Alternatives:
+  Do not store this flag in page header, but associate this bit with shared buffer. Logically it is more correct but in practice we will get not advantages: neither in space, neither in CPU overhead.
 
-```
- src/backend/access/heap/heapam.c                            |   26 +-
- src/include/access/heapam_xlog.h                            |    6 +-
-```
 
-We have added a new t_cid field to heap WAL records. This changes the WAL record format, making Neon WAL format incompatible with vanilla PostgreSQL!
+3. XLogReadBufferForRedo not always loads and pins requested buffer. So we need to add extra checks that buffer is really pinned. Also do not use BufferGetBlockNumber for buffer returned by XLogReadBufferForRedo.
+- Why?
+  XLogReadBufferForRedo is not pinning pages which are not requested by wal-redo. It is specific only for wal-redo Postgres.
 
-### Problem we're trying to solve
+- Alternatives?
+  No
 
-The problem is that the XLOG_HEAP_INSERT record does not include the command id of the inserted row. And same with deletion/update. So in the primary, a row is inserted with current xmin + cmin. But in the replica, the cmin is always set to 1. That works in PostgreSQL, because the command id is only relevant to the inserting transaction itself. After commit/abort, no one cares about it anymore. But with Neon, we rely on WAL replay to reconstruct the page, even while the original transaction is still running.
 
-### How to get rid of the patch
+4. Eliminate reporting of some warnings related with hint bits, for example
+"page is not marked all-visible but visibility map bit is set in relation".
+- Why?
+  Hint bit may be not WAL logged.
 
-Bite the bullet and submit the patch to PostgreSQL, to add the t_cid to the WAL records. It makes the WAL records larger, which could make this unpopular in the PostgreSQL community. However, it might simplify some logical decoding code; Andres Freund briefly mentioned in PGCon 2022 discussion on Heikki's Neon presentation that logical decoding currently needs to jump through some hoops to reconstruct the same information.
+- Alternative?
+  Always wal log any page changes.
 
 
-### Alternatives
-Perhaps we could write an extra WAL record with the t_cid information, when a page is evicted that contains rows that were touched a transaction that's still running. However, that seems very complicated.
+5. Maintain last written LSN.
+- Why?
+  When compute node requests page from page server, we need to specify LSN. Ideally it should be LSN
+  of WAL record performing last update of this pages. But we do not know it, because we do not have page.
+  We can use current WAL flush position, but in this case there is high probability that page server
+  will be blocked until this peace of WAL is delivered.
+  As better approximation we can keep max LSN of written page. It will be better to take in account LSNs only of evicted pages,
+  but SMGR API doesn't provide such knowledge.
 
-## ginfast.c
+- Alternatives?
+  Maintain map of LSNs of evicted pages.
 
-```
-diff --git a/src/backend/access/gin/ginfast.c b/src/backend/access/gin/ginfast.c
-index e0d9940946..2d964c02e9 100644
---- a/src/backend/access/gin/ginfast.c
-+++ b/src/backend/access/gin/ginfast.c
-@@ -285,6 +285,17 @@ ginHeapTupleFastInsert(GinState *ginstate, GinTupleCollector *collector)
-                memset(&sublist, 0, sizeof(GinMetaPageData));
-                makeSublist(index, collector->tuples, collector->ntuples, &sublist);
- 
-+               if (metadata->head != InvalidBlockNumber)
-+               {
-+                       /*
-+                        * ZENITH: Get buffer before XLogBeginInsert() to avoid recursive call
-+                        * of XLogBeginInsert(). Reading a new buffer might evict a dirty page from
-+                        * the buffer cache, and if that page happens to be an FSM or VM page, zenith_write()
-+                        * will try to WAL-log an image of the page.
-+                        */
-+                       buffer = ReadBuffer(index, metadata->tail);
-+               }
-+
-                if (needWal)
-                        XLogBeginInsert();
- 
-@@ -316,7 +327,6 @@ ginHeapTupleFastInsert(GinState *ginstate, GinTupleCollector *collector)
-                        data.prevTail = metadata->tail;
-                        data.newRightlink = sublist.head;
- 
--                       buffer = ReadBuffer(index, metadata->tail);
-                        LockBuffer(buffer, GIN_EXCLUSIVE);
-                        page = BufferGetPage(buffer);
-```
 
-The problem is explained in the comment above
+6. Launching Postgres without WAL.
+- Why?
+  According to Zenith architecture compute node is stateless. So when we are launching
+  compute node, we need to provide some dummy PG_DATADIR. Relation pages
+  can be requested on demand from page server. But Postgres still need some non-relational data:
+  control and configuration files, SLRUs,...
+  It is currently implemented  using basebackup (do not mix with pg_basebackup) which is created
+  by pageserver. It includes in this tarball config/control files, SLRUs and required directories.
+  As far as pageserver do not have original (non-scattered) WAL segments, it includes in
+  this tarball dummy WAL segment which contains only SHUTDOWN_CHECKPOINT record at the beginning of segment,
+  which redo field points to the end of wal. It allows to load checkpoint record in more or less
+  standard way with minimal changes of Postgres, but then some special handling is needed,
+  including restoring previous record position from zenith.signal file.
+  Also we have to correctly initialize header of last WAL page (pointed by checkpoint.redo)
+  to pass checks performed by XLogReader.
 
-### How to get rid of the patch
+- Alternatives?
+  We may not include fake WAL segment in tarball at all and modify xlog.c to load checkpoint record
+  in special way. But it may only increase number of changes in xlog.c
 
-Can we stop WAL-logging FSM or VM pages? Or delay the WAL logging until we're out of the critical
-section or something.
+7. Add redo_read_buffer_filter callback to XLogReadBufferForRedoExtended
+- Why?
+  We need a way in wal-redo Postgres to ignore pages which are not requested by pageserver.
+  So wal-redo Postgres reconstructs only requested page and for all other returns BLK_DONE
+  which means that recovery for them is not needed.
 
-Maybe some bigger rewrite of FSM and VM would help to avoid WAL-logging FSM and VM page images?
+- Alternatives?
+  No
 
+8. Enforce WAL logging of sequence updates.
+- Why?
+  Due to performance reasons Postgres don't want to log each fetching of a value from a sequence,
+  so we pre-log a few fetches in advance. In the event of crash we can lose
+  (skip over) as many values as we pre-logged.
+  But it doesn't work with Zenith because page with sequence value can be evicted from buffer cache
+  and we will get a gap in sequence values even without crash.
 
-## Mark index builds that use buffer manager without logging explicitly
+- Alternatives:
+  Do not try to preserve sequential order but avoid performance penalty.
 
-```
- src/backend/access/gin/gininsert.c                          |    7 +
- src/backend/access/gist/gistbuild.c                         |   15 +-
- src/backend/access/spgist/spginsert.c                       |    8 +-
 
-also some changes in src/backend/storage/smgr/smgr.c
-```
+9. Treat unlogged tables as normal (permanent) tables.
+- Why?
+  Unlogged tables are not transient, so them have to survive node restart (unlike temporary tables).
+  But as far as compute node is stateless, we need to persist their data to storage node.
+  And it can only be done through the WAL.
 
-When a GIN index is built, for example, it is built by inserting the entries into the index more or
-less normally, but without WAL-logging anything. After the index has been built, we iterate through
-all pages and write them to the WAL. That doesn't work for Neon, because if a page is not WAL-logged
-and is evicted from the buffer cache, it is lost. We have an check to catch that in the Neon
-extension. To fix that, we've added a few functions to track explicitly when we're performing such
-an operation: `smgr_start_unlogged_build`, `smgr_finish_unlogged_build_phase_1` and
-`smgr_end_unlogged_build`.
+- Alternatives?
+  * Store unlogged tables locally (violates requirement of stateless compute nodes).
+  * Prohibit unlogged tables at all.
 
 
-### How to get rid of the patch
+10. Support start Postgres in wal-redo mode
+- Why?
+  To be able to apply WAL record and reconstruct pages at page server.
 
-I think it would make sense to be more explicit about that in PostgreSQL too. So extract these
-changes to a patch and post to pgsql-hackers.
+- Alternatives?
+  * Rewrite redo handlers in Rust
+  * Do not reconstruct pages at page server at all and do it at compute node.
 
 
-## Track last-written page LSN
+11. WAL proposer
+- Why?
+  WAL proposer is communicating with safekeeper and ensures WAL durability by quorum writes.
+  It is currently implemented as patch to standard WAL sender.
 
-```
- src/backend/commands/dbcommands.c                           |   17 +-
+- Alternatives?
+  Can be moved to extension if some extra callbacks will be added to wal sender code.
 
-Also one call to SetLastWrittenPageLSN() in spginsert.c, maybe elsewhere too
-```
 
-Whenever a page is evicted from the buffer cache, we remember its LSN, so that we can use the same
-LSN in the GetPage@LSN request when reading the page back from the page server. The value is
-conservative: it would be correct to always use the last-inserted LSN, but it would be slow because
-then the page server would need to wait for the recent WAL to be streamed and processed, before
-responding to any GetPage@LSN request.
+12. Secure Computing BPF API wrapper.
+- Why?
+  Pageserver delegates complex WAL decoding duties to Postgres,
+  which means that the latter might fall victim to carefully designed
+  malicious WAL records and start doing harmful things to the system.
+  To prevent this, it has been decided to limit possible interactions
+  with the outside world using the Secure Computing BPF mode.
+
+- Alternatives:
+  * Rewrite redo handlers in Rust.
+  * Add more checks to guarantee correctness of WAL records.
+  * Move seccomp.c to extension
+  * Many other discussed approaches to neutralize incorrect WAL records vulnerabilities.
+
+
+13. Callbacks for replica feedbacks
+- Why?
+  Allowing waproposer to interact with walsender code.
+
+- Alternatives
+  Copy walsender code to walproposer.
+
+
+14. Support multiple SMGR implementations.
+- Why?
+  Postgres provides abstract API for storage manager but it has only one implementation
+  and provides no way to replace it with custom storage manager.
+
+- Alternatives?
+  None.
+
+
+15. Calculate database size as sum of all database relations.
+- Why?
+  Postgres is calculating database size by traversing data directory
+  but as far as Zenith compute node is stateless we can not do it.
+
+- Alternatives?
+  Send this request directly to pageserver and calculate real (physical) size
+  of Zenith representation of database/timeline, rather than sum logical size of all relations.
 
-The last-written page LSN is mostly tracked in the smgrwrite() function, without core code changes,
-but there are a few exceptions where we've had to add explicit calls to the Neon-specific
-SetLastWrittenPageLSN() function.
 
-There's an open PR to track the LSN in a more-fine grained fashion:
-https://github.com/neondatabase/postgres/pull/177
+-----------------------------------------------
+Not currently committed but proposed:
 
-PostgreSQL v15 introduces a new method to do CREATE DATABASE that WAL-logs the database instead of
-relying copying files and checkpoint. With that method, we probably won't need any special handling.
-The old method is still available, though.
+1. Disable ring buffer buffer manager strategies
+- Why?
+  Postgres tries to avoid cache flushing by bulk operations (copy, seqscan, vacuum,...).
+  Even if there are free space in buffer cache, pages may be evicted.
+  Negative effect of it can be somehow compensated by file system cache, but in case of Zenith
+  cost of requesting page from page server is much higher.
 
-### How to get rid of the patch
+- Alternatives?
+  Instead of just prohibiting ring buffer we may try to implement more flexible eviction policy,
+  for example copy evicted page from ring buffer to some other buffer if there is free space
+  in buffer cache.
 
-Wait until v15?
-
-
-## Cache relation sizes
-
-The Neon extension contains a little cache for smgrnblocks() and smgrexists() calls, to avoid going
-to the page server every time. It might be useful to cache those in PostgreSQL, maybe in the
-relcache? (I think we do cache nblocks in relcache already, check why that's not good enough for
-Neon)
+2. Disable marking page as dirty when hint bits are set.
+- Why?
+  Postgres has to modify page twice: first time when some tuple is updated and second time when
+  hint bits are set. Wal logging hint bits updates requires FPI which significantly increase size of WAL.
 
+- Alternatives?
+  Add special WAL record for setting page hints.
 
-## Use buffer manager when extending VM or FSM
+3. Prefetching
+- Why?
+  As far as pages in Zenith are loaded on demand, to reduce node startup time
+  and also sppedup some massive queries we need some mechanism for bulk loading to
+  reduce page request round-trip overhead.
 
-```
- src/backend/storage/freespace/freespace.c                   |   14 +-
- src/backend/access/heap/visibilitymap.c                     |   15 +-
+  Currently Postgres is supporting prefetching only for bitmap scan.
+  In Zenith we also use prefetch for sequential and index scan. For sequential scan we prefetch
+  some number of following pages. For index scan we prefetch pages of heap relation addressed by TIDs.
 
-diff --git a/src/backend/access/heap/visibilitymap.c b/src/backend/access/heap/visibilitymap.c
-index e198df65d8..addfe93eac 100644
---- a/src/backend/access/heap/visibilitymap.c
-+++ b/src/backend/access/heap/visibilitymap.c
-@@ -652,10 +652,19 @@ vm_extend(Relation rel, BlockNumber vm_nblocks)
-        /* Now extend the file */
-        while (vm_nblocks_now < vm_nblocks)
-        {
--               PageSetChecksumInplace((Page) pg.data, vm_nblocks_now);
-+               /*
-+                * ZENITH: Initialize VM pages through buffer cache to prevent loading
-+                * them from pageserver.
-+                */
-+               Buffer  buffer = ReadBufferExtended(rel, VISIBILITYMAP_FORKNUM, P_NEW,
-+                                                                                       RBM_ZERO_AND_LOCK, NULL);
-+               Page    page = BufferGetPage(buffer);
-+
-+               PageInit((Page) page, BLCKSZ, 0);
-+               PageSetChecksumInplace(page, vm_nblocks_now);
-+               MarkBufferDirty(buffer);
-+               UnlockReleaseBuffer(buffer);
- 
--               smgrextend(rel->rd_smgr, VISIBILITYMAP_FORKNUM, vm_nblocks_now,
--                                  pg.data, false);
-                vm_nblocks_now++;
-        }
-```
-
-### Problem we're trying to solve
-
-???
-
-### How to get rid of the patch
-
-Maybe this would be a reasonable change in PostgreSQL too?
-
-
-## Allow startup without reading checkpoint record
-
-In Neon, the compute node is stateless. So when we are launching compute node, we need to provide
-some dummy PG_DATADIR. Relation pages can be requested on demand from page server. But Postgres
-still need some non-relational data: control and configuration files, SLRUs,...  It is currently
-implemented using basebackup (do not mix with pg_basebackup) which is created by pageserver. It
-includes in this tarball config/control files, SLRUs and required directories.
-
-As pageserver does not have the original WAL segments, the basebackup tarball includes an empty WAL
-segment to bootstrap the WAL writing, but it doesn't contain the checkpoint record.  There are some
-changes in xlog.c, to allow starting the compute node without reading the last checkpoint record
-from WAL.
-
-This includes code to read the `zenith.signal` file, which tells the startup code the LSN to start
-at. When the `zenith.signal` file is present, the startup uses that LSN instead of the last
-checkpoint's LSN. The system is known to be consistent at that LSN, without any WAL redo.
-
-
-### How to get rid of the patch
-
-???
-
-
-### Alternatives
-
-Include a fake checkpoint record in the tarball. Creating fake WAL is a bit risky, though; I'm
-afraid it might accidentally get streamed to the safekeepers and overwrite or corrupt the real WAL.
-
-## Disable sequence caching
-
-```
-diff --git a/src/backend/commands/sequence.c b/src/backend/commands/sequence.c
-index 0415df9ccb..9f9db3c8bc 100644
---- a/src/backend/commands/sequence.c
-+++ b/src/backend/commands/sequence.c
-@@ -53,7 +53,9 @@
-  * so we pre-log a few fetches in advance. In the event of
-  * crash we can lose (skip over) as many values as we pre-logged.
-  */
--#define SEQ_LOG_VALS   32
-+/* Zenith XXX: to ensure sequence order of sequence in Zenith we need to WAL log each sequence update. */
-+/* #define SEQ_LOG_VALS        32 */
-+#define SEQ_LOG_VALS   0
-```
-
-Due to performance reasons Postgres don't want to log each fetching of a value from a sequence, so
-it pre-logs a few fetches in advance. In the event of crash we can lose (skip over) as many values
-as we pre-logged. But with Neon, because page with sequence value can be evicted from buffer cache,
-we can get a gap in sequence values even without crash.
-
-### How to get rid of the patch
-
-Maybe we can just remove it, and accept the gaps. Or add some special handling for sequence
-relations in the Neon extension, to WAL log the sequence page when it's about to be evicted. It
-would be weird if the sequence moved backwards though, think of PITR.
-
-Or add a GUC for the amount to prefix to PostgreSQL, and force it to 1 in Neon.
-
-
-## Walproposer
-
-```
- src/Makefile                                                |    1 +
- src/backend/replication/libpqwalproposer/Makefile           |   37 +
- src/backend/replication/libpqwalproposer/libpqwalproposer.c |  416 ++++++++++++
- src/backend/postmaster/bgworker.c                           |    4 +
- src/backend/postmaster/postmaster.c                         |    6 +
- src/backend/replication/Makefile                            |    4 +-
- src/backend/replication/walproposer.c                       | 2350 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- src/backend/replication/walproposer_utils.c                 |  402 +++++++++++
- src/backend/replication/walreceiver.c                       |    7 +
- src/backend/replication/walsender.c                         |  320 ++++++---
- src/backend/storage/ipc/ipci.c                              |    6 +
- src/include/replication/walproposer.h                       |  565 ++++++++++++++++
-```
-
-WAL proposer is communicating with safekeeper and ensures WAL durability by quorum writes.  It is
-currently implemented as patch to standard WAL sender.
-
-### How to get rid of the patch
-
-Refactor into an extension. Submit hooks or APIs into upstream if necessary.
-
-@MMeent did some work on this already: https://github.com/neondatabase/postgres/pull/96
-
-## Ignore unexpected data beyond EOF in bufmgr.c
-
-```
-@@ -922,11 +928,14 @@ ReadBuffer_common(SMgrRelation smgr, char relpersistence, ForkNumber forkNum,
-                 */
-                bufBlock = isLocalBuf ? LocalBufHdrGetBlock(bufHdr) : BufHdrGetBlock(bufHdr);
-                if (!PageIsNew((Page) bufBlock))
--                       ereport(ERROR,
-+               {
-+                        // XXX-ZENITH
-+                        MemSet((char *) bufBlock, 0, BLCKSZ);
-+                        ereport(DEBUG1,
-                                        (errmsg("unexpected data beyond EOF in block %u of relation %s",
-                                                        blockNum, relpath(smgr->smgr_rnode, forkNum)),
-                                         errhint("This has been seen to occur with buggy kernels; consider updating your system.")));
--
-+               }
-                /*
-                 * We *must* do smgrextend before succeeding, else the page will not
-                 * be reserved by the kernel, and the next P_NEW call will decide to
-```
-
-PostgreSQL is a bit sloppy with extending relations. Usually, the relation is extended with zeros
-first, then the page is filled, and finally the new page WAL-logged. But if multiple backends extend
-a relation at the same time, the pages can be WAL-logged in different order.
-
-I'm not sure what scenario exactly required this change in Neon, though.
-
-### How to get rid of the patch
-
-Submit patches to pgsql-hackers, to tighten up the WAL-logging around relation extension. It's a bit
-confusing even in PostgreSQL. Maybe WAL log the intention to extend first, then extend the relation,
-and finally WAL-log that the extension succeeded.
-
-## Make smgr interface available to extensions
-
-```
- src/backend/storage/smgr/smgr.c                             |  203 +++---
- src/include/storage/smgr.h                                  |   72 +-
-```
-
-### How to get rid of the patch
-
-Submit to upstream. This could be useful for the Disk Encryption patches too, or for compression.
-
-
-## Added relpersistence argument to smgropen()
-
-```
- src/backend/access/heap/heapam_handler.c                    |    2 +-
- src/backend/catalog/storage.c                               |   10 +-
- src/backend/commands/tablecmds.c                            |    2 +-
- src/backend/storage/smgr/md.c                               |    4 +-
- src/include/utils/rel.h                                     |    3 +-
-```
-
-Neon needs to treat unlogged relations differently from others, so the smgrread(), smgrwrite() etc.
-implementations need to know the 'relpersistence' of the relation. To get that information where
-it's needed, we added the 'relpersistence' field to smgropen().
-
-### How to get rid of the patch
-
-Maybe 'relpersistence' would be useful in PostgreSQL for debugging purposes? Or simply for the
-benefit of extensions like Neon. Should consider this in the patch to make smgr API usable to
-extensions.
-
-## Alternatives
-
-Currently in Neon, unlogged tables live on local disk in the compute node, and are wiped away on
-compute node restart. One alternative would be to instead WAL-log even unlogged tables, essentially
-ignoring the UNLOGGED option. Or prohibit UNLOGGED tables completely. But would we still need the
-relpersistence argument to handle index builds? See item on "Mark index builds that use buffer
-manager without logging explicitly".
-
-## Use smgr and dbsize_hook for size calculations
-
-```
- src/backend/utils/adt/dbsize.c                              |   61 +-
-```
-
-In PostgreSQL, the rel and db-size functions scan the data directory directly. That won't work in Neon.
-
-### How to get rid of the patch
-
-Send patch to PostgreSQL, to use smgr API functions for relation size calculation instead. Maybe as
-part of the general smgr API patch.
-
-
-
-# WAL redo process changes
-
-Pageserver delegates complex WAL decoding duties to Postgres, which means that the latter might fall
-victim to carefully designed malicious WAL records and start doing harmful things to the system.  To
-prevent this, the redo functions are executed in a separate process that is sandboxed with Linux
-Secure Computing mode (see seccomp(2) man page).
-
-As an alternative to having a separate WAL redo process, we could rewrite all redo handlers in Rust
-This is infeasible. However, it would take a lot of effort to rewrite them, ensure that you've done
-the rewrite correctly, and once you've done that, it would be a lot of ongoing maintenance effort to
-keep the rewritten code in sync over time, across new PostgreSQL versions. That's why we want to
-leverage PostgreSQL code.
-
-Another alternative would be to harden all the PostgreSQL WAL redo functions so that it would be
-safe to call them directly from Rust code, without needing the security sandbox. That's not feasible
-for similar reasons as rewriting them in Rust.
-
-
-## Don't replay change in XLogReadBufferForRedo that are not for the target page we're replaying
-
-```
- src/backend/access/gin/ginxlog.c                            |   19 +-
-
-Also some changes in xlog.c and xlogutils.c
-
-Example:
-
-@@ -415,21 +416,27 @@ ginRedoSplit(XLogReaderState *record)
-        if (!isLeaf)
-                ginRedoClearIncompleteSplit(record, 3);
- 
--       if (XLogReadBufferForRedo(record, 0, &lbuffer) != BLK_RESTORED)
-+       action = XLogReadBufferForRedo(record, 0, &lbuffer);
-+       if (action != BLK_RESTORED && action != BLK_DONE)
-                elog(ERROR, "GIN split record did not contain a full-page image of left page");
-```
-
-### Problem we're trying to solve
-
-In PostgreSQL, if a WAL redo function calls XLogReadBufferForRead() for a page that has a full-page
-image, it always succeeds. However, Neon WAL redo process is only concerned about replaying changes
-to a singe page, so replaying any changes for other pages is a waste of cycles. We have modified
-XLogReadBufferForRead() to return BLK_DONE for all other pages, to avoid the overhead. That is
-unexpected by code like the above.
-
-### How to get rid of the patch
-
-Submit the changes to upstream, hope the community accepts them. There's no harm to PostgreSQL from
-these changes, although it doesn't have any benefit either.
-
-To make these changes useful to upstream PostgreSQL, we could implement a feature to look ahead the
-WAL, and detect truncated relations. Even in PostgreSQL, it is a waste of cycles to replay changes
-to pages that are later truncated away, so we could have XLogReadBufferForRedo() return BLK_DONE or
-BLK_NOTFOUND for pages that are known to be truncated away later in the WAL stream.
-
-### Alternatives
-
-Maybe we could revert this optimization, and restore pages other than the target page too.
-
-## Add predefined_sysidentifier flag to initdb
-
-```
- src/backend/bootstrap/bootstrap.c                           |   13 +-
- src/bin/initdb/initdb.c                                     |    4 +
-
-And some changes in xlog.c
-```
-
-This is used to help with restoring a database when you have all the WAL, all the way back to
-initdb, but no backup. You can reconstruct the missing backup by running initdb again, with the same
-sysidentifier.
-
-
-### How to get rid of the patch
-
-Ignore it. This is only needed for disaster recovery, so once we've eliminated all other Postgres
-patches, we can just keep it around as a patch or as separate branch in a repo.
-
-
-# Not currently committed but proposed
-
-## Disable ring buffer buffer manager strategies
-
-### Why?
-
-Postgres tries to avoid cache flushing by bulk operations (copy, seqscan, vacuum,...).
-Even if there are free space in buffer cache, pages may be evicted.
-Negative effect of it can be somehow compensated by file system cache, but in Neon,
-cost of requesting page from page server is much higher.
-
-### Alternatives?
-
-Instead of just prohibiting ring buffer we may try to implement more flexible eviction policy,
-for example copy evicted page from ring buffer to some other buffer if there is free space
-in buffer cache.
-
-## Disable marking page as dirty when hint bits are set.
-
-### Why?
-
-Postgres has to modify page twice: first time when some tuple is updated and second time when
-hint bits are set. Wal logging hint bits updates requires FPI which significantly increase size of WAL.
-
-### Alternatives?
-
-Add special WAL record for setting page hints.
-
-## Prefetching
-
-### Why?
-
-As far as pages in Neon are loaded on demand, to reduce node startup time
-and also speedup some massive queries we need some mechanism for bulk loading to
-reduce page request round-trip overhead.
-
-Currently Postgres is supporting prefetching only for bitmap scan.
-In Neon we should also use prefetch for sequential and index scans, because the OS is not doing it for us.
-For sequential scan we could prefetch some number of following pages. For index scan we could prefetch pages
-of heap relation addressed by TIDs.
-
-## Prewarming
-
-### Why?
-
-Short downtime (or, in other words, fast compute node restart time) is one of the key feature of Zenith.
-But overhead of request-response round-trip for loading pages on demand can make started node warm-up quite slow.
-We can capture state of compute node buffer cache and send bulk request for this pages at startup.
+4. Prewarming.
+- Why?
+  Short downtime (or, in other words, fast compute node restart time) is one of the key feature of Zenith.
+  But overhead of request-response round-trip for loading pages on demand can make started node warm-up quite slow.
+  We can capture state of compute node buffer cache and send bulk request for this pages at startup.

docs/docker.md

@@ -1,84 +1,38 @@
-# Docker images of Neon
+# Docker images of Zenith
 
 ## Images
 
 Currently we build two main images:
 
-- [neondatabase/neon](https://hub.docker.com/repository/docker/zenithdb/zenith) — image with pre-built `pageserver`, `safekeeper` and `proxy` binaries and all the required runtime dependencies. Built from [/Dockerfile](/Dockerfile).
-- [neondatabase/compute-node](https://hub.docker.com/repository/docker/zenithdb/compute-node) — compute node image with pre-built Postgres binaries from [neondatabase/postgres](https://github.com/neondatabase/postgres).
+- [zenithdb/zenith](https://hub.docker.com/repository/docker/zenithdb/zenith) — image with pre-built `pageserver`, `safekeeper` and `proxy` binaries and all the required runtime dependencies. Built from [/Dockerfile](/Dockerfile).
+- [zenithdb/compute-node](https://hub.docker.com/repository/docker/zenithdb/compute-node) — compute node image with pre-built Postgres binaries from [zenithdb/postgres](https://github.com/zenithdb/postgres).
 
-And additional intermediate image:
+And two intermediate images used either to reduce build time or to deliver some additional binary tools from other repos:
 
-- [neondatabase/compute-tools](https://hub.docker.com/repository/docker/neondatabase/compute-tools) — compute node configuration management tools.
+- [zenithdb/build](https://hub.docker.com/repository/docker/zenithdb/build) — image with all the dependencies required to build Zenith and compute node images. This image is based on `rust:slim-buster`, so it also has a proper `rust` environment. Built from [/Dockerfile.build](/Dockerfile.build).
+- [zenithdb/compute-tools](https://hub.docker.com/repository/docker/zenithdb/compute-tools) — compute node configuration management tools.
 
 ## Building pipeline
 
-We build all images after a successful `release` tests run and push automatically to Docker Hub with two parallel CI jobs
+1. Image `zenithdb/compute-tools` is re-built automatically.
 
-1. `neondatabase/compute-tools` and `neondatabase/compute-node`
+2. Image `zenithdb/build` is built manually. If you want to introduce any new compile time dependencies to Zenith or compute node you have to update this image as well, build it and push to Docker Hub.
 
-2. `neondatabase/neon`
-
-## Docker Compose example
-
-You can see a [docker compose](https://docs.docker.com/compose/) example to create a neon cluster in [/docker-compose/docker-compose.yml](/docker-compose/docker-compose.yml). It creates the following conatainers.
-
-- pageserver x 1
-- safekeeper x 3
-- storage_broker x 1
-- compute x 1
-- MinIO x 1        # This is Amazon S3 compatible object storage
-
-### How to use
-
-1. create containers
-
-You can specify version of neon cluster using following environment values.
-- PG_VERSION: postgres version for compute (default is 14)
-- TAG: the tag version of [docker image](https://registry.hub.docker.com/r/neondatabase/neon/tags) (default is latest), which is tagged in [CI test](/.github/workflows/build_and_test.yml)
-```
-$ cd docker-compose/
-$ docker-compose down   # remove the conainers if exists
-$ PG_VERSION=15 TAG=2937 docker-compose up --build -d  # You can specify the postgres and image version
-Creating network "dockercompose_default" with the default driver
-Creating docker-compose_storage_broker_1       ... done
-(...omit...)
+Build:
+```sh
+docker build -t zenithdb/build:buster -f Dockerfile.build .
 ```
 
-2. connect compute node
-```
-$ echo "localhost:55433:postgres:cloud_admin:cloud_admin" >> ~/.pgpass
-$ psql -h localhost -p 55433 -U cloud_admin
-postgres=# CREATE TABLE t(key int primary key, value text);
-CREATE TABLE
-postgres=# insert into t values(1,1);
-INSERT 0 1
-postgres=# select * from t;
- key | value
------+-------
-   1 | 1
-(1 row)
+Login:
+```sh
+docker login
 ```
 
-3. If you want to see the log, you can use `docker-compose logs` command.
-```
-# check the container name you want to see
-$ docker ps
-CONTAINER ID   IMAGE                                              COMMAND                  CREATED         STATUS         PORTS                                                                                                                                  NAMES
-d6968a5ae912   dockercompose_compute                              "/shell/compute.sh"      5 minutes ago   Up 5 minutes   0.0.0.0:3080->3080/tcp, 0.0.0.0:55433->55433/tcp                                                                                       dockercompose_compute_1
-(...omit...)
-
-$ docker logs -f dockercompose_compute_1
-2022-10-21 06:15:48.757 GMT [56] LOG:  connection authorized: user=cloud_admin database=postgres application_name=psql
-2022-10-21 06:17:00.307 GMT [56] LOG:  [NEON_SMGR] libpagestore: connected to 'host=pageserver port=6400'
-(...omit...)
+Push to Docker Hub:
+```sh
+docker push zenithdb/build:buster
 ```
 
-4. If you want to see durable data in MinIO which is s3 compatible storage
+3. Image `zenithdb/compute-node` is built independently in the [zenithdb/postgres](https://github.com/zenithdb/postgres) repo.
 
-Access http://localhost:9001 and sign in.
-
-- Username: `minio`
-- Password: `password`
-
-You can see durable pages and WAL data in `neon` bucket.
+4. Image `zenithdb/zenith` is built in this repo after a successful `release` tests run and pushed to Docker Hub automatically.