update comments

.cargo/config.toml

@@ -1,7 +1,16 @@
-[build]
-# This is only present for local builds, as it will be overridden
-# by the RUSTDOCFLAGS env var in CI.
-rustdocflags = ["-Arustdoc::private_intra_doc_links"]
+# The binaries are really slow, if you compile them in 'dev' mode with the defaults.
+# Enable some optimizations even in 'dev' mode, to make tests faster. The basic
+# optimizations enabled by "opt-level=1" don't affect debuggability too much.
+#
+# See https://www.reddit.com/r/rust/comments/gvrgca/this_is_a_neat_trick_for_getting_good_runtime/
+#
+[profile.dev.package."*"]
+# Set the default for dependencies in Development mode.
+opt-level = 3
+
+[profile.dev]
+# Turn on a small amount of optimization in Development mode.
+opt-level = 1
 
 [alias]
 build_testing = ["build", "--features", "testing"]

.config/hakari.toml

@@ -22,31 +22,5 @@ platforms = [
     # "x86_64-pc-windows-msvc",
 ]
 
-[final-excludes]
-workspace-members = [
-    # vm_monitor benefits from the same Cargo.lock as the rest of our artifacts, but
-    # it is built primarly in separate repo neondatabase/autoscaling and thus is excluded
-    # from depending on workspace-hack because most of the dependencies are not used.
-    "vm_monitor",
-    # All of these exist in libs and are not usually built independently.
-    # Putting workspace hack there adds a bottleneck for cargo builds.
-    "compute_api",
-    "consumption_metrics",
-    "desim",
-    "metrics",
-    "pageserver_api",
-    "postgres_backend",
-    "postgres_connection",
-    "postgres_ffi",
-    "pq_proto",
-    "remote_storage",
-    "safekeeper_api",
-    "tenant_size_model",
-    "tracing-utils",
-    "utils",
-    "wal_craft",
-    "walproposer",
-]
-
 # Write out exact versions rather than a semver range. (Defaults to false.)
 # exact-versions = true

.config/nextest.toml

@@ -1,2 +0,0 @@
-[profile.default]
-slow-timeout = { period = "60s", terminate-after = 3 }

.dockerignore

@@ -1,30 +1,24 @@
 *
 
-# Files
-!Cargo.lock
-!Cargo.toml
-!Makefile
 !rust-toolchain.toml
-!scripts/combine_control_files.py
-!scripts/ninstall.sh
-!vm-cgconfig.conf
-!docker-compose/run-tests.sh
+!Cargo.toml
+!Cargo.lock
+!Makefile
 
-# Directories
 !.cargo/
 !.config/
-!compute_tools/
 !control_plane/
+!compute_tools/
 !libs/
-!neon_local/
 !pageserver/
-!patches/
 !pgxn/
 !proxy/
-!storage_scrubber/
 !safekeeper/
 !storage_broker/
-!storage_controller/
 !trace/
-!vendor/postgres-*/
+!vendor/postgres-v14/
+!vendor/postgres-v15/
 !workspace_hack/
+!neon_local/
+!scripts/ninstall.sh
+!vm-cgconfig.conf

.gitattributes

@@ -1,2 +0,0 @@
-# allows for nicer hunk headers with git show
-*.rs diff=rust

.github/ISSUE_TEMPLATE/config.yml

@@ -1,6 +0,0 @@
-
-blank_issues_enabled: true
-contact_links:
-  - name: Feature request
-    url: https://console.neon.tech/app/projects?modal=feedback
-    about: For feature requests in the Neon product, please submit via the feedback form on `https://console.neon.tech`

.github/ISSUE_TEMPLATE/epic-template.md

@@ -16,10 +16,9 @@ assignees: ''
 
 ## Implementation ideas
 
+
 ## Tasks
-```[tasklist]
-- [ ] Example Task
-```
+- [ ]
 
 
 ## Other related tasks and Epics

.github/PULL_REQUEST_TEMPLATE/release-pr.md

@@ -3,7 +3,7 @@
 **NB: this PR must be merged only by 'Create a merge commit'!**
 
 ### Checklist when preparing for release
-- [ ] Read or refresh [the release flow guide](https://www.notion.so/neondatabase/Release-general-flow-61f2e39fd45d4d14a70c7749604bd70b)
+- [ ] Read or refresh [the release flow guide](https://github.com/neondatabase/cloud/wiki/Release:-general-flow)
 - [ ] Ask in the [cloud Slack channel](https://neondb.slack.com/archives/C033A2WE6BZ) that you are going to rollout the release. Any blockers?
 - [ ] Does this release contain any db migrations? Destructive ones? What is the rollback plan?
 

.github/actionlint.yml

@@ -1,22 +0,0 @@
-self-hosted-runner:
-  labels:
-    - arm64
-    - large
-    - large-arm64
-    - small
-    - small-arm64
-    - us-east-2
-config-variables:
-  - AZURE_DEV_CLIENT_ID
-  - AZURE_DEV_REGISTRY_NAME
-  - AZURE_DEV_SUBSCRIPTION_ID
-  - AZURE_PROD_CLIENT_ID
-  - AZURE_PROD_REGISTRY_NAME
-  - AZURE_PROD_SUBSCRIPTION_ID
-  - AZURE_TENANT_ID
-  - BENCHMARK_PROJECT_ID_PUB
-  - BENCHMARK_PROJECT_ID_SUB
-  - REMOTE_STORAGE_AZURE_CONTAINER
-  - REMOTE_STORAGE_AZURE_REGION
-  - SLACK_UPCOMING_RELEASE_CHANNEL_ID
-  - DEV_AWS_OIDC_ROLE_ARN

.github/actions/allure-report-generate/action.yml

@@ -1,20 +1,7 @@
 name: 'Create Allure report'
 description: 'Generate Allure report from uploaded by actions/allure-report-store tests results'
 
-inputs:
-  store-test-results-into-db:
-    description: 'Whether to store test results into the database. TEST_RESULT_CONNSTR/TEST_RESULT_CONNSTR_NEW should be set'
-    type: boolean
-    required: false
-    default: false
-
 outputs:
-  base-url:
-    description: 'Base URL for Allure report'
-    value: ${{ steps.generate-report.outputs.base-url }}
-  base-s3-url:
-    description: 'Base S3 URL for Allure report'
-    value: ${{ steps.generate-report.outputs.base-s3-url }}
   report-url:
     description: 'Allure report URL'
     value: ${{ steps.generate-report.outputs.report-url }}
@@ -39,7 +26,7 @@ runs:
         PR_NUMBER=$(jq --raw-output .pull_request.number "$GITHUB_EVENT_PATH" || true)
         if [ "${PR_NUMBER}" != "null" ]; then
           BRANCH_OR_PR=pr-${PR_NUMBER}
-        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ] || [ "${GITHUB_REF_NAME}" = "release-proxy" ]; then
+        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ]; then
           # Shortcut for special branches
           BRANCH_OR_PR=${GITHUB_REF_NAME}
         else
@@ -59,7 +46,7 @@ runs:
         BUCKET: neon-github-public-dev
 
     # TODO: We can replace with a special docker image with Java and Allure pre-installed
-    - uses: actions/setup-java@v4
+    - uses: actions/setup-java@v3
       with:
         distribution: 'temurin'
         java-version: '17'
@@ -76,8 +63,8 @@ runs:
           rm -f ${ALLURE_ZIP}
         fi
       env:
-        ALLURE_VERSION: 2.27.0
-        ALLURE_ZIP_SHA256: b071858fb2fa542c65d8f152c5c40d26267b2dfb74df1f1608a589ecca38e777
+        ALLURE_VERSION: 2.22.1
+        ALLURE_ZIP_SHA256: fdc7a62d94b14c5e0bf25198ae1feded6b005fdbed864b4d3cb4e5e901720b0b
 
     # Potentially we could have several running build for the same key (for example, for the main branch), so we use improvised lock for this
     - name: Acquire lock
@@ -115,22 +102,18 @@ runs:
         REPORT_PREFIX=reports/${BRANCH_OR_PR}
         RAW_PREFIX=reports-raw/${BRANCH_OR_PR}/${GITHUB_RUN_ID}
 
-        BASE_URL=https://${BUCKET}.s3.amazonaws.com/${REPORT_PREFIX}/${GITHUB_RUN_ID}
-        BASE_S3_URL=s3://${BUCKET}/${REPORT_PREFIX}/${GITHUB_RUN_ID}
-        REPORT_URL=${BASE_URL}/index.html
-        REPORT_JSON_URL=${BASE_URL}/data/suites.json
-
         # Get previously uploaded data for this run
         ZSTD_NBTHREADS=0
 
-        S3_FILEPATHS=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${RAW_PREFIX}/ | jq --raw-output '.Contents[]?.Key')
+        S3_FILEPATHS=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${RAW_PREFIX}/ | jq --raw-output  '.Contents[].Key')
         if [ -z "$S3_FILEPATHS" ]; then
           # There's no previously uploaded data for this $GITHUB_RUN_ID
           exit 0
         fi
+        for S3_FILEPATH in ${S3_FILEPATHS}; do
+          time aws s3 cp --only-show-errors "s3://${BUCKET}/${S3_FILEPATH}" "${WORKDIR}"
 
-        time aws s3 cp --recursive --only-show-errors "s3://${BUCKET}/${RAW_PREFIX}/" "${WORKDIR}/"
-        for archive in $(find ${WORKDIR} -name "*.tar.zst"); do
+          archive=${WORKDIR}/$(basename $S3_FILEPATH)
           mkdir -p ${archive%.tar.zst}
           time tar -xf ${archive} -C ${archive%.tar.zst}
           rm -f ${archive}
@@ -147,10 +130,9 @@ runs:
 
         # Upload a history and the final report (in this particular order to not to have duplicated history in 2 places)
         time aws s3 mv --recursive --only-show-errors "${WORKDIR}/report/history" "s3://${BUCKET}/${REPORT_PREFIX}/latest/history"
+        time aws s3 mv --recursive --only-show-errors "${WORKDIR}/report" "s3://${BUCKET}/${REPORT_PREFIX}/${GITHUB_RUN_ID}"
 
-        # Use aws s3 cp (instead of aws s3 sync) to keep files from previous runs to make old URLs work,
-        # and to keep files on the host to upload them to the database
-        time s5cmd --log error cp "${WORKDIR}/report/*" "s3://${BUCKET}/${REPORT_PREFIX}/${GITHUB_RUN_ID}/"
+        REPORT_URL=https://${BUCKET}.s3.amazonaws.com/${REPORT_PREFIX}/${GITHUB_RUN_ID}/index.html
 
         # Generate redirect
         cat <<EOF > ${WORKDIR}/index.html
@@ -162,10 +144,8 @@ runs:
         EOF
         time aws s3 cp --only-show-errors ${WORKDIR}/index.html "s3://${BUCKET}/${REPORT_PREFIX}/latest/index.html"
 
-        echo "base-url=${BASE_URL}"               >> $GITHUB_OUTPUT
-        echo "base-s3-url=${BASE_S3_URL}"         >> $GITHUB_OUTPUT
-        echo "report-url=${REPORT_URL}"           >> $GITHUB_OUTPUT
-        echo "report-json-url=${REPORT_JSON_URL}" >> $GITHUB_OUTPUT
+        echo "report-url=${REPORT_URL}"                                   >> $GITHUB_OUTPUT
+        echo "report-json-url=${REPORT_URL%/index.html}/data/suites.json" >> $GITHUB_OUTPUT
 
         echo "[Allure Report](${REPORT_URL})" >> ${GITHUB_STEP_SUMMARY}
 
@@ -179,34 +159,6 @@ runs:
           aws s3 rm "s3://${BUCKET}/${LOCK_FILE}"
         fi
 
-    - name: Cache poetry deps
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pypoetry/virtualenvs
-        key: v2-${{ runner.os }}-${{ runner.arch }}-python-deps-${{ hashFiles('poetry.lock') }}
-
-    - name: Store Allure test stat in the DB (new)
-      if: ${{ !cancelled() && inputs.store-test-results-into-db == 'true' }}
-      shell: bash -euxo pipefail {0}
-      env:
-        COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-        BASE_S3_URL: ${{ steps.generate-report.outputs.base-s3-url }}
-      run: |
-        if [ ! -d "${WORKDIR}/report/data/test-cases" ]; then
-          exit 0
-        fi
-
-        export DATABASE_URL=${REGRESS_TEST_RESULT_CONNSTR_NEW}
-
-        ./scripts/pysync
-
-        poetry run python3 scripts/ingest_regress_test_result-new-format.py \
-          --reference ${GITHUB_REF} \
-          --revision ${COMMIT_SHA} \
-          --run-id ${GITHUB_RUN_ID} \
-          --run-attempt ${GITHUB_RUN_ATTEMPT} \
-          --test-cases-dir ${WORKDIR}/report/data/test-cases
-
     - name: Cleanup
       if: always()
       shell: bash -euxo pipefail {0}
@@ -215,7 +167,7 @@ runs:
           rm -rf ${WORKDIR}
         fi
 
-    - uses: actions/github-script@v7
+    - uses: actions/github-script@v6
       if: always()
       env:
         REPORT_URL: ${{ steps.generate-report.outputs.report-url }}

.github/actions/allure-report-store/action.yml

@@ -19,7 +19,7 @@ runs:
         PR_NUMBER=$(jq --raw-output .pull_request.number "$GITHUB_EVENT_PATH" || true)
         if [ "${PR_NUMBER}" != "null" ]; then
           BRANCH_OR_PR=pr-${PR_NUMBER}
-        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ] || [ "${GITHUB_REF_NAME}" = "release-proxy" ]; then
+        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ]; then
           # Shortcut for special branches
           BRANCH_OR_PR=${GITHUB_REF_NAME}
         else

.github/actions/download/action.yml

@@ -26,12 +26,12 @@ runs:
         TARGET: ${{ inputs.path }}
         ARCHIVE: /tmp/downloads/${{ inputs.name }}.tar.zst
         SKIP_IF_DOES_NOT_EXIST: ${{ inputs.skip-if-does-not-exist }}
-        PREFIX: artifacts/${{ inputs.prefix || format('{0}/{1}/{2}', github.event.pull_request.head.sha || github.sha, github.run_id, github.run_attempt) }}
+        PREFIX: artifacts/${{ inputs.prefix || format('{0}/{1}', github.run_id, github.run_attempt) }}
       run: |
         BUCKET=neon-github-public-dev
         FILENAME=$(basename $ARCHIVE)
 
-        S3_KEY=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${PREFIX%$GITHUB_RUN_ATTEMPT} | jq -r '.Contents[]?.Key' | grep ${FILENAME} | sort --version-sort | tail -1 || true)
+        S3_KEY=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${PREFIX%$GITHUB_RUN_ATTEMPT} | jq -r '.Contents[].Key' | grep ${FILENAME} | sort --version-sort | tail -1 || true)
         if [ -z "${S3_KEY}" ]; then
           if [ "${SKIP_IF_DOES_NOT_EXIST}" = "true" ]; then
             echo 'SKIPPED=true' >> $GITHUB_OUTPUT

.github/actions/neon-branch-create/action.yml

@@ -3,14 +3,14 @@ description: 'Create Branch using API'
 
 inputs:
   api_key:
-    description: 'Neon API key'
+    desctiption: 'Neon API key'
     required: true
   project_id:
-    description: 'ID of the Project to create Branch in'
+    desctiption: 'ID of the Project to create Branch in'
     required: true
   api_host:
-    description: 'Neon API host'
-    default: console-stage.neon.build
+    desctiption: 'Neon API host'
+    default: console.stage.neon.tech
 outputs:
   dsn:
     description: 'Created Branch DSN (for main database)'

.github/actions/neon-branch-delete/action.yml

@@ -3,17 +3,17 @@ description: 'Delete Branch using API'
 
 inputs:
   api_key:
-    description: 'Neon API key'
+    desctiption: 'Neon API key'
     required: true
   project_id:
-    description: 'ID of the Project which should be deleted'
+    desctiption: 'ID of the Project which should be deleted'
     required: true
   branch_id:
-    description: 'ID of the branch to delete'
+    desctiption: 'ID of the branch to delete'
     required: true
   api_host:
-    description: 'Neon API host'
-    default: console-stage.neon.build
+    desctiption: 'Neon API host'
+    default: console.stage.neon.tech
 
 runs:
   using: "composite"

.github/actions/neon-project-create/action.yml

@@ -3,19 +3,22 @@ description: 'Create Neon Project using API'
 
 inputs:
   api_key:
-    description: 'Neon API key'
+    desctiption: 'Neon API key'
     required: true
   region_id:
-    description: 'Region ID, if not set the project will be created in the default region'
+    desctiption: 'Region ID, if not set the project will be created in the default region'
     default: aws-us-east-2
   postgres_version:
-    description: 'Postgres version; default is 16'
-    default: '16'
+    desctiption: 'Postgres version; default is 15'
+    default: 15
   api_host:
-    description: 'Neon API host'
-    default: console-stage.neon.build
+    desctiption: 'Neon API host'
+    default: console.stage.neon.tech
+  provisioner:
+    desctiption: 'k8s-pod or k8s-neonvm'
+    default: 'k8s-pod'
   compute_units:
-    description: '[Min, Max] compute units'
+    desctiption: '[Min, Max] compute units; Min and Max are used for k8s-neonvm with autoscaling, for k8s-pod values Min and Max should be equal'
     default: '[1, 1]'
 
 outputs:
@@ -34,6 +37,10 @@ runs:
       # A shell without `set -x` to not to expose password/dsn in logs
       shell: bash -euo pipefail {0}
       run: |
+        if [ "${PROVISIONER}" == "k8s-pod" ] && [ "${MIN_CU}" != "${MAX_CU}" ]; then
+          echo >&2 "For k8s-pod provisioner MIN_CU should be equal to MAX_CU"
+        fi
+
         project=$(curl \
           "https://${API_HOST}/api/v2/projects" \
           --fail \
@@ -45,7 +52,7 @@ runs:
               \"name\": \"Created by actions/neon-project-create; GITHUB_RUN_ID=${GITHUB_RUN_ID}\",
               \"pg_version\": ${POSTGRES_VERSION},
               \"region_id\": \"${REGION_ID}\",
-              \"provisioner\": \"k8s-neonvm\",
+              \"provisioner\": \"${PROVISIONER}\",
               \"autoscaling_limit_min_cu\": ${MIN_CU},
               \"autoscaling_limit_max_cu\": ${MAX_CU},
               \"settings\": { }
@@ -68,5 +75,6 @@ runs:
         API_KEY: ${{ inputs.api_key }}
         REGION_ID: ${{ inputs.region_id }}
         POSTGRES_VERSION: ${{ inputs.postgres_version }}
+        PROVISIONER: ${{ inputs.provisioner }}
         MIN_CU: ${{ fromJSON(inputs.compute_units)[0] }}
         MAX_CU: ${{ fromJSON(inputs.compute_units)[1] }}

.github/actions/neon-project-delete/action.yml

@@ -3,14 +3,14 @@ description: 'Delete Neon Project using API'
 
 inputs:
   api_key:
-    description: 'Neon API key'
+    desctiption: 'Neon API key'
     required: true
   project_id:
-    description: 'ID of the Project to delete'
+    desctiption: 'ID of the Project to delete'
     required: true
   api_host:
-    description: 'Neon API host'
-    default: console-stage.neon.build
+    desctiption: 'Neon API host'
+    default: console.stage.neon.tech
 
 runs:
   using: "composite"

.github/actions/run-python-test-set/action.yml

@@ -43,11 +43,7 @@ inputs:
   pg_version:
     description: 'Postgres version to use for tests'
     required: false
-    default: 'v16'
-  benchmark_durations:
-    description: 'benchmark durations JSON'
-    required: false
-    default: '{}'
+    default: 'v14'
 
 runs:
   using: "composite"
@@ -56,14 +52,14 @@ runs:
       if: inputs.build_type != 'remote'
       uses: ./.github/actions/download
       with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-${{ inputs.build_type }}-artifact
+        name: neon-${{ runner.os }}-${{ inputs.build_type }}-artifact
         path: /tmp/neon
 
     - name: Download Neon binaries for the previous release
       if: inputs.build_type != 'remote'
       uses: ./.github/actions/download
       with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-${{ inputs.build_type }}-artifact
+        name: neon-${{ runner.os }}-${{ inputs.build_type }}-artifact
         path: /tmp/neon-previous
         prefix: latest
 
@@ -71,24 +67,23 @@ runs:
       if: inputs.build_type != 'remote'
       uses: ./.github/actions/download
       with:
-        name: compatibility-snapshot-${{ runner.arch }}-${{ inputs.build_type }}-pg${{ inputs.pg_version }}
+        name: compatibility-snapshot-${{ inputs.build_type }}-pg${{ inputs.pg_version }}
         path: /tmp/compatibility_snapshot_pg${{ inputs.pg_version }}
         prefix: latest
-        # The lack of compatibility snapshot (for example, for the new Postgres version)
-        # shouldn't fail the whole job. Only relevant test should fail.
-        skip-if-does-not-exist: true
 
     - name: Checkout
       if: inputs.needs_postgres_source == 'true'
-      uses: actions/checkout@v4
+      uses: actions/checkout@v3
       with:
         submodules: true
+        fetch-depth: 1
 
     - name: Cache poetry deps
-      uses: actions/cache@v4
+      id: cache_poetry
+      uses: actions/cache@v3
       with:
         path: ~/.cache/pypoetry/virtualenvs
-        key: v2-${{ runner.os }}-${{ runner.arch }}-python-deps-${{ hashFiles('poetry.lock') }}
+        key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
 
     - name: Install Python deps
       shell: bash -euxo pipefail {0}
@@ -113,8 +108,6 @@ runs:
         export PLATFORM=${PLATFORM:-github-actions-selfhosted}
         export POSTGRES_DISTRIB_DIR=${POSTGRES_DISTRIB_DIR:-/tmp/neon/pg_install}
         export DEFAULT_PG_VERSION=${PG_VERSION#v}
-        export LD_LIBRARY_PATH=${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/lib
-        export BENCHMARK_CONNSTR=${BENCHMARK_CONNSTR:-}
 
         if [ "${BUILD_TYPE}" = "remote" ]; then
           export REMOTE_ENV=1
@@ -130,8 +123,8 @@ runs:
           exit 1
         fi
         if [[ "${{ inputs.run_in_parallel }}" == "true" ]]; then
-          # -n sets the number of parallel processes that pytest-xdist will run
-          EXTRA_PARAMS="-n12 $EXTRA_PARAMS"
+          # -n16 uses sixteen processes to run tests via pytest-xdist
+          EXTRA_PARAMS="-n16 $EXTRA_PARAMS"
 
           # --dist=loadgroup points tests marked with @pytest.mark.xdist_group
           # to the same worker to make @pytest.mark.order work with xdist
@@ -152,45 +145,28 @@ runs:
 
         if [ "${RERUN_FLAKY}" == "true" ]; then
           mkdir -p $TEST_OUTPUT
-          poetry run ./scripts/flaky_tests.py "${TEST_RESULT_CONNSTR}" \
-                                              --days 7 \
-                                              --output "$TEST_OUTPUT/flaky.json" \
-                                              --pg-version "${DEFAULT_PG_VERSION}" \
-                                              --build-type "${BUILD_TYPE}"
+          poetry run ./scripts/flaky_tests.py "${TEST_RESULT_CONNSTR}" --days 10 --output "$TEST_OUTPUT/flaky.json"
 
           EXTRA_PARAMS="--flaky-tests-json $TEST_OUTPUT/flaky.json $EXTRA_PARAMS"
         fi
 
-        # We use pytest-split plugin to run benchmarks in parallel on different CI runners
-        if [ "${TEST_SELECTION}" = "test_runner/performance" ] && [ "${{ inputs.build_type }}" != "remote" ]; then
-          mkdir -p $TEST_OUTPUT
-          echo '${{ inputs.benchmark_durations || '{}' }}' > $TEST_OUTPUT/benchmark_durations.json
-
-          EXTRA_PARAMS="--durations-path $TEST_OUTPUT/benchmark_durations.json $EXTRA_PARAMS"
-        fi
-
-        if [[ $BUILD_TYPE == "debug" && $RUNNER_ARCH == 'X64' ]]; then
+        if [[ "${{ inputs.build_type }}" == "debug" ]]; then
           cov_prefix=(scripts/coverage "--profraw-prefix=$GITHUB_JOB" --dir=/tmp/coverage run)
+        elif [[ "${{ inputs.build_type }}" == "release" ]]; then
+          cov_prefix=()
         else
           cov_prefix=()
         fi
 
         # Wake up the cluster if we use remote neon instance
         if [ "${{ inputs.build_type }}" = "remote" ] && [ -n "${BENCHMARK_CONNSTR}" ]; then
-          QUERIES=("SELECT version()")
-          if [[ "${PLATFORM}" = "neon"* ]]; then
-            QUERIES+=("SHOW neon.tenant_id")
-            QUERIES+=("SHOW neon.timeline_id")
-          fi
-
-          for q in "${QUERIES[@]}"; do
-            ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/psql ${BENCHMARK_CONNSTR} -c "${q}"
-          done
+          ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/psql ${BENCHMARK_CONNSTR} -c "SELECT version();"
         fi
 
         # Run the tests.
         #
-        # --alluredir saves test results in Allure format (in a specified directory)
+        # The junit.xml file allows CI tools to display more fine-grained test information
+        # in its "Tests" tab in the results page.
         # --verbose prints name of each test (helpful when there are
         # multiple tests in one file)
         # -rA prints summary in the end
@@ -199,6 +175,7 @@ runs:
         #
         mkdir -p $TEST_OUTPUT/allure/results
         "${cov_prefix[@]}" ./scripts/pytest \
+          --junitxml=$TEST_OUTPUT/junit.xml \
           --alluredir=$TEST_OUTPUT/allure/results \
           --tb=short \
           --verbose \
@@ -211,17 +188,17 @@ runs:
         fi
 
     - name: Upload compatibility snapshot
-      # Note, that we use `github.base_ref` which is a target branch for a PR
-      if: github.event_name == 'pull_request' && github.base_ref == 'release'
+      if: github.ref_name == 'release'
       uses: ./.github/actions/upload
       with:
-        name: compatibility-snapshot-${{ runner.arch }}-${{ inputs.build_type }}-pg${{ inputs.pg_version }}
+        name: compatibility-snapshot-${{ inputs.build_type }}-pg${{ inputs.pg_version }}-${{ github.run_id }}
         # Directory is created by test_compatibility.py::test_create_snapshot, keep the path in sync with the test
         path: /tmp/test_output/compatibility_snapshot_pg${{ inputs.pg_version }}/
+        prefix: latest
 
     - name: Upload test results
       if: ${{ !cancelled() }}
       uses: ./.github/actions/allure-report-store
       with:
         report-dir: /tmp/test_output/allure/results
-        unique-key: ${{ inputs.build_type }}-${{ inputs.pg_version }}
+        unique-key: ${{ inputs.build_type }}

.github/actions/set-docker-config-dir/action.yml

@@ -1,36 +0,0 @@
-name: "Set custom docker config directory"
-description: "Create a directory for docker config and set DOCKER_CONFIG"
-
-# Use custom DOCKER_CONFIG directory to avoid conflicts with default settings
-runs:
-  using: "composite"
-  steps:
-  - name: Show warning on GitHub-hosted runners
-    if: runner.environment == 'github-hosted'
-    shell: bash -euo pipefail {0}
-    run: |
-      # Using the following environment variables to find a path to the workflow file
-      # ${GITHUB_WORKFLOW_REF} - octocat/hello-world/.github/workflows/my-workflow.yml@refs/heads/my_branch
-      # ${GITHUB_REPOSITORY}   - octocat/hello-world
-      # ${GITHUB_REF}          - refs/heads/my_branch
-      # From https://docs.github.com/en/actions/writing-workflows/choosing-what-your-workflow-does/variables
-
-      filename_with_ref=${GITHUB_WORKFLOW_REF#"$GITHUB_REPOSITORY/"}
-      filename=${filename_with_ref%"@$GITHUB_REF"}
-
-      # https://docs.github.com/en/actions/writing-workflows/choosing-what-your-workflow-does/workflow-commands-for-github-actions#setting-a-warning-message
-      title='Unnecessary usage of `.github/actions/set-docker-config-dir`'
-      message='No need to use `.github/actions/set-docker-config-dir` action on GitHub-hosted runners'
-      echo "::warning file=${filename},title=${title}::${message}"
-
-  - uses: pyTooling/Actions/with-post-step@74afc5a42a17a046c90c68cb5cfa627e5c6c5b6b # v1.0.7
-    env:
-      DOCKER_CONFIG: .docker-custom-${{ github.run_id }}-${{ github.run_attempt }}
-    with:
-      main: |
-        mkdir -p "${DOCKER_CONFIG}"
-        echo DOCKER_CONFIG=${DOCKER_CONFIG} | tee -a $GITHUB_ENV
-      post: |
-        if [ -d "${DOCKER_CONFIG}" ]; then
-          rm -r "${DOCKER_CONFIG}"
-        fi

.github/actions/upload/action.yml

@@ -8,7 +8,7 @@ inputs:
     description: "A directory or file to upload"
     required: true
   prefix:
-    description: "S3 prefix. Default is '${GITHUB_SHA}/${GITHUB_RUN_ID}/${GITHUB_RUN_ATTEMPT}'"
+    description: "S3 prefix. Default is '${GITHUB_RUN_ID}/${GITHUB_RUN_ATTEMPT}'"
     required: false
 
 runs:
@@ -45,7 +45,7 @@ runs:
       env:
         SOURCE: ${{ inputs.path }}
         ARCHIVE: /tmp/uploads/${{ inputs.name }}.tar.zst
-        PREFIX: artifacts/${{ inputs.prefix || format('{0}/{1}/{2}', github.event.pull_request.head.sha || github.sha, github.run_id , github.run_attempt) }}
+        PREFIX: artifacts/${{ inputs.prefix || format('{0}/{1}', github.run_id, github.run_attempt) }}
       run: |
         BUCKET=neon-github-public-dev
         FILENAME=$(basename $ARCHIVE)

.github/workflows/_benchmarking_preparation.yml

@@ -1,154 +0,0 @@
-name: Prepare benchmarking databases by restoring dumps
-
-on:
-  workflow_call:
-    # no inputs needed
-    
-defaults:
-  run:
-    shell: bash -euxo pipefail {0}
-
-jobs:
-  setup-databases:
-    strategy:
-      fail-fast: false
-      matrix:
-        platform: [ aws-rds-postgres, aws-aurora-serverless-v2-postgres, neon ] 
-        database: [ clickbench, tpch, userexample ]
-  
-    env:
-      LD_LIBRARY_PATH: /tmp/neon/pg_install/v16/lib
-      PLATFORM: ${{ matrix.platform }}
-      PG_BINARIES: /tmp/neon/pg_install/v16/bin
-
-    runs-on: [ self-hosted, us-east-2, x64 ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
-      options: --init
-
-    steps:
-    - name: Set up Connection String
-      id: set-up-prep-connstr
-      run: |
-        case "${PLATFORM}" in
-          neon)
-            CONNSTR=${{ secrets.BENCHMARK_CAPTEST_CONNSTR }} 
-            ;;
-          aws-rds-postgres)
-            CONNSTR=${{ secrets.BENCHMARK_RDS_POSTGRES_CONNSTR }} 
-            ;;
-          aws-aurora-serverless-v2-postgres)
-            CONNSTR=${{ secrets.BENCHMARK_RDS_AURORA_CONNSTR }} 
-            ;;
-          *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}"
-            exit 1
-            ;;
-        esac
-
-        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT  
-
-    - uses: actions/checkout@v4
-
-    - name: Download Neon artifact
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
-        path: /tmp/neon/
-        prefix: latest
-
-    # we create a table that has one row for each database that we want to restore with the status whether the restore is done    
-    - name: Create benchmark_restore_status table if it does not exist
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.set-up-prep-connstr.outputs.connstr }}
-        DATABASE_NAME: ${{ matrix.database }}
-      # to avoid a race condition of multiple jobs trying to create the table at the same time, 
-      # we use an advisory lock
-      run: |
-        ${PG_BINARIES}/psql "${{ env.BENCHMARK_CONNSTR }}" -c "
-        SELECT pg_advisory_lock(4711);  
-        CREATE TABLE IF NOT EXISTS benchmark_restore_status (
-        databasename text primary key,
-        restore_done boolean
-        );
-        SELECT pg_advisory_unlock(4711);
-        "
-    
-    - name: Check if restore is already done
-      id: check-restore-done
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.set-up-prep-connstr.outputs.connstr }}
-        DATABASE_NAME: ${{ matrix.database }}
-      run: |
-        skip=false
-        if ${PG_BINARIES}/psql "${{ env.BENCHMARK_CONNSTR }}" -tAc "SELECT 1 FROM benchmark_restore_status WHERE databasename='${{ env.DATABASE_NAME }}' AND restore_done=true;" | grep -q 1; then
-          echo "Restore already done for database ${{ env.DATABASE_NAME }} on platform ${{ env.PLATFORM }}. Skipping this database."
-          skip=true
-        fi
-        echo "skip=${skip}" | tee -a $GITHUB_OUTPUT
-
-    - name: Check and create database if it does not exist
-      if: steps.check-restore-done.outputs.skip != 'true'
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.set-up-prep-connstr.outputs.connstr }}
-        DATABASE_NAME: ${{ matrix.database }}
-      run: |
-        DB_EXISTS=$(${PG_BINARIES}/psql "${{ env.BENCHMARK_CONNSTR }}" -tAc "SELECT 1 FROM pg_database WHERE datname='${{ env.DATABASE_NAME }}'")
-        if [ "$DB_EXISTS" != "1" ]; then
-          echo "Database ${{ env.DATABASE_NAME }} does not exist. Creating it..."
-          ${PG_BINARIES}/psql "${{ env.BENCHMARK_CONNSTR }}" -c "CREATE DATABASE \"${{ env.DATABASE_NAME }}\";"
-        else
-          echo "Database ${{ env.DATABASE_NAME }} already exists."
-        fi
-
-    - name: Download dump from S3 to /tmp/dumps
-      if: steps.check-restore-done.outputs.skip != 'true'
-      env:
-        DATABASE_NAME: ${{ matrix.database }}
-      run: |
-        mkdir -p /tmp/dumps
-        aws s3 cp s3://neon-github-dev/performance/pgdumps/$DATABASE_NAME/$DATABASE_NAME.pg_dump /tmp/dumps/ 
-
-    - name: Replace database name in connection string
-      if: steps.check-restore-done.outputs.skip != 'true'
-      id: replace-dbname
-      env:
-        DATABASE_NAME: ${{ matrix.database }}
-        BENCHMARK_CONNSTR: ${{ steps.set-up-prep-connstr.outputs.connstr }}
-      run: |
-        # Extract the part before the database name
-        base_connstr="${BENCHMARK_CONNSTR%/*}"
-        # Extract the query parameters (if any) after the database name
-        query_params="${BENCHMARK_CONNSTR#*\?}"
-        # Reconstruct the new connection string
-        if [ "$query_params" != "$BENCHMARK_CONNSTR" ]; then
-          new_connstr="${base_connstr}/${DATABASE_NAME}?${query_params}"
-        else
-          new_connstr="${base_connstr}/${DATABASE_NAME}"
-        fi
-        echo "database_connstr=${new_connstr}" >> $GITHUB_OUTPUT  
-
-    - name: Restore dump
-      if: steps.check-restore-done.outputs.skip != 'true'
-      env:
-        DATABASE_NAME: ${{ matrix.database }}
-        DATABASE_CONNSTR: ${{ steps.replace-dbname.outputs.database_connstr }}
-        # the following works only with larger computes: 
-        # PGOPTIONS: "-c maintenance_work_mem=8388608 -c max_parallel_maintenance_workers=7"
-        # we add the || true because:
-        # the dumps were created with Neon and contain neon extensions that are not 
-        # available in RDS, so we will always report an error, but we can ignore it
-      run: |
-        ${PG_BINARIES}/pg_restore --clean --if-exists --no-owner --jobs=4 \
-        -d "${DATABASE_CONNSTR}" /tmp/dumps/${DATABASE_NAME}.pg_dump || true
-
-    - name: Update benchmark_restore_status table
-      if: steps.check-restore-done.outputs.skip != 'true'
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.set-up-prep-connstr.outputs.connstr }}
-        DATABASE_NAME: ${{ matrix.database }}
-      run: |
-        ${PG_BINARIES}/psql "${{ env.BENCHMARK_CONNSTR }}" -c "
-        INSERT INTO benchmark_restore_status (databasename, restore_done) VALUES ('${{ env.DATABASE_NAME }}', true)
-        ON CONFLICT (databasename) DO UPDATE SET restore_done = true;
-        "

.github/workflows/_build-and-test-locally.yml

@@ -1,318 +0,0 @@
-name: Build and Test Locally
-
-on:
-  workflow_call:
-    inputs:
-      arch:
-        description: 'x64 or arm64'
-        required: true
-        type: string
-      build-tag:
-        description: 'build tag'
-        required: true
-        type: string
-      build-tools-image:
-        description: 'build-tools image'
-        required: true
-        type: string
-      build-type:
-        description: 'debug or release'
-        required: true
-        type: string
-      pg-versions:
-        description: 'a json array of postgres versions to run regression tests on'
-        required: true
-        type: string
-
-defaults:
-  run:
-    shell: bash -euxo pipefail {0}
-
-env:
-  RUST_BACKTRACE: 1
-  COPT: '-Werror'
-  AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-  AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-
-jobs:
-  build-neon:
-    runs-on: ${{ fromJson(format('["self-hosted", "{0}"]', inputs.arch == 'arm64' && 'large-arm64' || 'large')) }}
-    container:
-      image: ${{ inputs.build-tools-image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      # Raise locked memory limit for tokio-epoll-uring.
-      # On 5.10 LTS kernels < 5.10.162 (and generally mainline kernels < 5.12),
-      # io_uring will account the memory of the CQ and SQ as locked.
-      # More details: https://github.com/neondatabase/neon/issues/6373#issuecomment-1905814391
-      options: --init --shm-size=512mb --ulimit memlock=67108864:67108864
-    env:
-      BUILD_TYPE: ${{ inputs.build-type }}
-      GIT_VERSION: ${{ github.event.pull_request.head.sha || github.sha }}
-      BUILD_TAG: ${{ inputs.build-tag }}
-
-    steps:
-      - name: Fix git ownership
-        run: |
-          # Workaround for `fatal: detected dubious ownership in repository at ...`
-          #
-          # Use both ${{ github.workspace }} and ${GITHUB_WORKSPACE} because they're different on host and in containers
-          #   Ref https://github.com/actions/checkout/issues/785
-          #
-          git config --global --add safe.directory ${{ github.workspace }}
-          git config --global --add safe.directory ${GITHUB_WORKSPACE}
-          for r in 14 15 16 17; do
-            git config --global --add safe.directory "${{ github.workspace }}/vendor/postgres-v$r"
-            git config --global --add safe.directory "${GITHUB_WORKSPACE}/vendor/postgres-v$r"
-          done
-
-      - uses: actions/checkout@v4
-        with:
-          submodules: true
-
-      - name: Set pg 14 revision for caching
-        id: pg_v14_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v14) >> $GITHUB_OUTPUT
-
-      - name: Set pg 15 revision for caching
-        id: pg_v15_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v15) >> $GITHUB_OUTPUT
-
-      - name: Set pg 16 revision for caching
-        id: pg_v16_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v16) >> $GITHUB_OUTPUT
-
-      - name: Set pg 17 revision for caching
-        id: pg_v17_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v17) >> $GITHUB_OUTPUT
-
-      # Set some environment variables used by all the steps.
-      #
-      # CARGO_FLAGS is extra options to pass to "cargo build", "cargo test" etc.
-      #   It also includes --features, if any
-      #
-      # CARGO_FEATURES is passed to "cargo metadata". It is separate from CARGO_FLAGS,
-      #   because "cargo metadata" doesn't accept --release or --debug options
-      #
-      # We run tests with addtional features, that are turned off by default (e.g. in release builds), see
-      # corresponding Cargo.toml files for their descriptions.
-      - name: Set env variables
-        env:
-          ARCH: ${{ inputs.arch }}
-        run: |
-          CARGO_FEATURES="--features testing"
-          if [[ $BUILD_TYPE == "debug" && $ARCH == 'x64' ]]; then
-            cov_prefix="scripts/coverage --profraw-prefix=$GITHUB_JOB --dir=/tmp/coverage run"
-            CARGO_FLAGS="--locked"
-          elif [[ $BUILD_TYPE == "debug" ]]; then
-            cov_prefix=""
-            CARGO_FLAGS="--locked"
-          elif [[ $BUILD_TYPE == "release" ]]; then
-            cov_prefix=""
-            CARGO_FLAGS="--locked --release"
-          fi
-          {
-            echo "cov_prefix=${cov_prefix}"
-            echo "CARGO_FEATURES=${CARGO_FEATURES}"
-            echo "CARGO_FLAGS=${CARGO_FLAGS}"
-            echo "CARGO_HOME=${GITHUB_WORKSPACE}/.cargo"
-          } >> $GITHUB_ENV
-
-      - name: Cache postgres v14 build
-        id: cache_pg_14
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v14
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ inputs.build-type }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile', 'Dockerfile.build-tools') }}
-
-      - name: Cache postgres v15 build
-        id: cache_pg_15
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v15
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ inputs.build-type }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile', 'Dockerfile.build-tools') }}
-
-      - name: Cache postgres v16 build
-        id: cache_pg_16
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v16
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ inputs.build-type }}-pg-${{ steps.pg_v16_rev.outputs.pg_rev }}-${{ hashFiles('Makefile', 'Dockerfile.build-tools') }}
-
-      - name: Cache postgres v17 build
-        id: cache_pg_17
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v17
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ inputs.build-type }}-pg-${{ steps.pg_v17_rev.outputs.pg_rev }}-${{ hashFiles('Makefile', 'Dockerfile.build-tools') }}
-
-      - name: Build postgres v14
-        if: steps.cache_pg_14.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v14 -j$(nproc)
-
-      - name: Build postgres v15
-        if: steps.cache_pg_15.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v15 -j$(nproc)
-
-      - name: Build postgres v16
-        if: steps.cache_pg_16.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v16 -j$(nproc)
-
-      - name: Build postgres v17
-        if: steps.cache_pg_17.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v17 -j$(nproc)
-
-      - name: Build neon extensions
-        run: mold -run make neon-pg-ext -j$(nproc)
-
-      - name: Build walproposer-lib
-        run: mold -run make walproposer-lib -j$(nproc)
-
-      - name: Run cargo build
-        run: |
-          PQ_LIB_DIR=$(pwd)/pg_install/v16/lib
-          export PQ_LIB_DIR
-          ${cov_prefix} mold -run cargo build $CARGO_FLAGS $CARGO_FEATURES --bins --tests
-
-      # Do install *before* running rust tests because they might recompile the
-      # binaries with different features/flags.
-      - name: Install rust binaries
-        env:
-          ARCH: ${{ inputs.arch }}
-        run: |
-          # Install target binaries
-          mkdir -p /tmp/neon/bin/
-          binaries=$(
-            ${cov_prefix} cargo metadata $CARGO_FEATURES --format-version=1 --no-deps |
-            jq -r '.packages[].targets[] | select(.kind | index("bin")) | .name'
-          )
-          for bin in $binaries; do
-            SRC=target/$BUILD_TYPE/$bin
-            DST=/tmp/neon/bin/$bin
-            cp "$SRC" "$DST"
-          done
-
-          # Install test executables and write list of all binaries (for code coverage)
-          if [[ $BUILD_TYPE == "debug" && $ARCH == 'x64' ]]; then
-            # Keep bloated coverage data files away from the rest of the artifact
-            mkdir -p /tmp/coverage/
-
-            mkdir -p /tmp/neon/test_bin/
-
-            test_exe_paths=$(
-              ${cov_prefix} cargo test $CARGO_FLAGS $CARGO_FEATURES --message-format=json --no-run |
-              jq -r '.executable | select(. != null)'
-            )
-            for bin in $test_exe_paths; do
-              SRC=$bin
-              DST=/tmp/neon/test_bin/$(basename $bin)
-
-              # We don't need debug symbols for code coverage, so strip them out to make
-              # the artifact smaller.
-              strip "$SRC" -o "$DST"
-              echo "$DST" >> /tmp/coverage/binaries.list
-            done
-
-            for bin in $binaries; do
-              echo "/tmp/neon/bin/$bin" >> /tmp/coverage/binaries.list
-            done
-          fi
-
-      - name: Run rust tests
-        env:
-          NEXTEST_RETRIES: 3
-        run: |
-          PQ_LIB_DIR=$(pwd)/pg_install/v16/lib
-          export PQ_LIB_DIR
-          LD_LIBRARY_PATH=$(pwd)/pg_install/v17/lib
-          export LD_LIBRARY_PATH
-
-          #nextest does not yet support running doctests
-          ${cov_prefix} cargo test --doc $CARGO_FLAGS $CARGO_FEATURES
-
-          # run all non-pageserver tests
-          ${cov_prefix} cargo nextest run $CARGO_FLAGS $CARGO_FEATURES -E '!package(pageserver)'
-
-          # run pageserver tests with different settings
-          for io_engine in std-fs tokio-epoll-uring ; do
-            for io_buffer_alignment in 0 1 512 ; do
-              NEON_PAGESERVER_UNIT_TEST_VIRTUAL_FILE_IOENGINE=$io_engine NEON_PAGESERVER_UNIT_TEST_IO_BUFFER_ALIGNMENT=$io_buffer_alignment ${cov_prefix} cargo nextest run $CARGO_FLAGS $CARGO_FEATURES  -E 'package(pageserver)'
-            done
-          done
-
-          # Run separate tests for real S3
-          export ENABLE_REAL_S3_REMOTE_STORAGE=nonempty
-          export REMOTE_STORAGE_S3_BUCKET=neon-github-ci-tests
-          export REMOTE_STORAGE_S3_REGION=eu-central-1
-          ${cov_prefix} cargo nextest run $CARGO_FLAGS $CARGO_FEATURES -E 'package(remote_storage)' -E 'test(test_real_s3)'
-
-          # Run separate tests for real Azure Blob Storage
-          # XXX: replace region with `eu-central-1`-like region
-          export ENABLE_REAL_AZURE_REMOTE_STORAGE=y
-          export AZURE_STORAGE_ACCOUNT="${{ secrets.AZURE_STORAGE_ACCOUNT_DEV }}"
-          export AZURE_STORAGE_ACCESS_KEY="${{ secrets.AZURE_STORAGE_ACCESS_KEY_DEV }}"
-          export REMOTE_STORAGE_AZURE_CONTAINER="${{ vars.REMOTE_STORAGE_AZURE_CONTAINER }}"
-          export REMOTE_STORAGE_AZURE_REGION="${{ vars.REMOTE_STORAGE_AZURE_REGION }}"
-          ${cov_prefix} cargo nextest run $CARGO_FLAGS $CARGO_FEATURES -E 'package(remote_storage)' -E 'test(test_real_azure)'
-
-      - name: Install postgres binaries
-        run: cp -a pg_install /tmp/neon/pg_install
-
-      - name: Upload Neon artifact
-        uses: ./.github/actions/upload
-        with:
-          name: neon-${{ runner.os }}-${{ runner.arch }}-${{ inputs.build-type }}-artifact
-          path: /tmp/neon
-
-      # XXX: keep this after the binaries.list is formed, so the coverage can properly work later
-      - name: Merge and upload coverage data
-        if: inputs.build-type == 'debug'
-        uses: ./.github/actions/save-coverage-data
-
-  regress-tests:
-    # Don't run regression tests on debug arm64 builds
-    if: inputs.build-type != 'debug' || inputs.arch != 'arm64'
-    needs: [ build-neon ]
-    runs-on: ${{ fromJson(format('["self-hosted", "{0}"]', inputs.arch == 'arm64' && 'large-arm64' || 'large')) }}
-    container:
-      image: ${{ inputs.build-tools-image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      # for changed limits, see comments on `options:` earlier in this file
-      options: --init --shm-size=512mb --ulimit memlock=67108864:67108864
-    strategy:
-      fail-fast: false
-      matrix:
-        pg_version: ${{ fromJson(inputs.pg-versions) }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: true
-
-      - name: Pytest regression tests
-        uses: ./.github/actions/run-python-test-set
-        timeout-minutes: 60
-        with:
-          build_type: ${{ inputs.build-type }}
-          test_selection: regress
-          needs_postgres_source: true
-          run_with_real_s3: true
-          real_s3_bucket: neon-github-ci-tests
-          real_s3_region: eu-central-1
-          rerun_flaky: true
-          pg_version: ${{ matrix.pg_version }}
-        env:
-          TEST_RESULT_CONNSTR: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}
-          CHECK_ONDISK_DATA_COMPATIBILITY: nonempty
-          BUILD_TAG: ${{ inputs.build-tag }}
-          PAGESERVER_VIRTUAL_FILE_IO_ENGINE: tokio-epoll-uring
-
-      # Temporary disable this step until we figure out why it's so flaky
-      # Ref https://github.com/neondatabase/neon/issues/4540
-      - name: Merge and upload coverage data
-        if: |
-          false &&
-          inputs.build-type == 'debug' && matrix.pg_version == 'v16'
-        uses: ./.github/actions/save-coverage-data

.github/workflows/_push-to-acr.yml

@@ -1,56 +0,0 @@
-name: Push images to ACR
-on:
-  workflow_call:
-    inputs:
-      client_id:
-        description: Client ID of Azure managed identity or Entra app
-        required: true
-        type: string
-      image_tag:
-        description: Tag for the container image
-        required: true
-        type: string
-      images:
-        description: Images to push
-        required: true
-        type: string
-      registry_name:
-        description: Name of the container registry
-        required: true
-        type: string
-      subscription_id:
-        description: Azure subscription ID
-        required: true
-        type: string
-      tenant_id:
-        description: Azure tenant ID
-        required: true
-        type: string
-
-jobs:
-  push-to-acr:
-    runs-on: ubuntu-22.04
-    permissions:
-      contents: read  # This is required for actions/checkout
-      id-token: write # This is required for Azure Login to work.
-
-    steps:
-      - name: Azure login
-        uses: azure/login@6c251865b4e6290e7b78be643ea2d005bc51f69a  # @v2.1.1
-        with:
-          client-id: ${{ inputs.client_id }}
-          subscription-id: ${{ inputs.subscription_id }}
-          tenant-id: ${{ inputs.tenant_id }}
-
-      - name: Login to ACR
-        run: |
-          az acr login --name=${{ inputs.registry_name }}
-
-      - name: Copy docker images to ACR ${{ inputs.registry_name }}
-        run: |
-          images='${{ inputs.images }}'
-          for image in ${images}; do
-            docker buildx imagetools create \
-              -t ${{ inputs.registry_name }}.azurecr.io/neondatabase/${image}:${{ inputs.image_tag }} \
-                                                        neondatabase/${image}:${{ inputs.image_tag }}
-          done

.github/workflows/actionlint.yml

@@ -1,51 +0,0 @@
-name: Lint GitHub Workflows
-
-on:
-  push:
-    branches:
-      - main
-      - release
-    paths:
-      - '.github/workflows/*.ya?ml'
-  pull_request:
-    paths:
-      - '.github/workflows/*.ya?ml'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: ${{ github.event_name == 'pull_request' }}
-
-jobs:
-  check-permissions:
-    if: ${{ !contains(github.event.pull_request.labels.*.name, 'run-no-ci') }}
-    uses: ./.github/workflows/check-permissions.yml
-    with:
-      github-event-name: ${{ github.event_name}}
-
-  actionlint:
-    needs: [ check-permissions ]
-    runs-on: ubuntu-22.04
-    steps:
-      - uses: actions/checkout@v4
-      - uses: reviewdog/action-actionlint@v1
-        env:
-          # SC2046 - Quote this to prevent word splitting. - https://www.shellcheck.net/wiki/SC2046
-          # SC2086 - Double quote to prevent globbing and word splitting. - https://www.shellcheck.net/wiki/SC2086
-          SHELLCHECK_OPTS: --exclude=SC2046,SC2086
-        with:
-          fail_on_error: true
-          filter_mode: nofilter
-          level: error
-
-      - name: Disallow 'ubuntu-latest' runners
-        run: |
-          PAT='^\s*runs-on:.*-latest'
-          if grep -ERq $PAT .github/workflows; then
-            grep -ERl $PAT .github/workflows |\
-            while read -r f
-            do
-              l=$(grep -nE $PAT $f | awk -F: '{print $1}' | head -1)
-              echo "::error file=$f,line=$l::Please use 'ubuntu-22.04' instead of 'ubuntu-latest'"
-            done
-            exit 1
-          fi

.github/workflows/approved-for-ci-run.yml

@@ -1,163 +0,0 @@
-name: Handle `approved-for-ci-run` label
-# This workflow helps to run CI pipeline for PRs made by external contributors (from forks).
-
-on:
-  pull_request_target:
-    branches:
-      - main
-    types:
-      # Default types that triggers a workflow ([1]):
-      # - [1] https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request
-      - opened
-      - synchronize
-      - reopened
-      # Types that we wand to handle in addition to keep labels tidy:
-      - closed
-      # Actual magic happens here:
-      - labeled
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
-  cancel-in-progress: false
-
-env:
-  GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-  PR_NUMBER: ${{ github.event.pull_request.number }}
-  BRANCH: "ci-run/pr-${{ github.event.pull_request.number }}"
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-jobs:
-  remove-label:
-    # Remove `approved-for-ci-run` label if the workflow is triggered by changes in a PR.
-    # The PR should be reviewed and labelled manually again.
-
-    permissions:
-      pull-requests: write # For `gh pr edit`
-
-    if: |
-      contains(fromJSON('["opened", "synchronize", "reopened", "closed"]'), github.event.action) &&
-      contains(github.event.pull_request.labels.*.name, 'approved-for-ci-run')
-
-    runs-on: ubuntu-22.04
-
-    steps:
-      - run: gh pr --repo "${GITHUB_REPOSITORY}" edit "${PR_NUMBER}" --remove-label "approved-for-ci-run"
-
-  create-or-update-pr-for-ci-run:
-    # Create local PR for an `approved-for-ci-run` labelled PR to run CI pipeline in it.
-
-    permissions:
-      pull-requests: write # for `gh pr edit`
-      # For `git push` and `gh pr create` we use CI_ACCESS_TOKEN
-
-    if: |
-      github.event.action == 'labeled' &&
-      contains(github.event.pull_request.labels.*.name, 'approved-for-ci-run')
-
-    runs-on: ubuntu-22.04
-
-    steps:
-      - run: gh pr --repo "${GITHUB_REPOSITORY}" edit "${PR_NUMBER}" --remove-label "approved-for-ci-run"
-
-      - uses: actions/checkout@v4
-        with:
-          ref: main
-          token: ${{ secrets.CI_ACCESS_TOKEN }}
-      
-      - name: Look for existing PR
-        id: get-pr
-        env:
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          ALREADY_CREATED="$(gh pr --repo ${GITHUB_REPOSITORY} list --head ${BRANCH} --base main --json number --jq '.[].number')"
-          echo "ALREADY_CREATED=${ALREADY_CREATED}" >> ${GITHUB_OUTPUT}
-      
-      - name: Get changed labels
-        id: get-labels
-        if: steps.get-pr.outputs.ALREADY_CREATED != ''
-        env:
-          ALREADY_CREATED: ${{ steps.get-pr.outputs.ALREADY_CREATED }}
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          LABELS_TO_REMOVE=$(comm -23 <(gh pr --repo ${GITHUB_REPOSITORY} view ${ALREADY_CREATED} --json labels --jq '.labels.[].name'| ( grep -E '^run' || true ) | sort) \
-          <(gh pr --repo ${GITHUB_REPOSITORY} view ${PR_NUMBER} --json labels --jq '.labels.[].name' | ( grep -E '^run' || true ) | sort ) |\
-          ( grep -v run-e2e-tests-in-draft || true ) | paste -sd , -)
-          LABELS_TO_ADD=$(comm -13 <(gh pr --repo ${GITHUB_REPOSITORY} view ${ALREADY_CREATED} --json labels --jq '.labels.[].name'| ( grep -E '^run' || true ) |sort) \
-          <(gh pr --repo ${GITHUB_REPOSITORY} view ${PR_NUMBER} --json labels --jq '.labels.[].name' |  ( grep -E '^run' || true ) | sort ) |\
-          paste -sd , -)
-          echo "LABELS_TO_ADD=${LABELS_TO_ADD}" >> ${GITHUB_OUTPUT}
-          echo "LABELS_TO_REMOVE=${LABELS_TO_REMOVE}" >> ${GITHUB_OUTPUT}
-
-      - run: gh pr checkout "${PR_NUMBER}"
-
-      - run: git checkout -b "${BRANCH}"
-
-      - run: git push --force origin "${BRANCH}"
-        if: steps.get-pr.outputs.ALREADY_CREATED == ''
-
-      - name: Create a Pull Request for CI run (if required)
-        if: steps.get-pr.outputs.ALREADY_CREATED == ''
-        env: 
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          cat << EOF > body.md
-            This Pull Request is created automatically to run the CI pipeline for #${PR_NUMBER}
-
-            Please do not alter or merge/close it.
-
-            Feel free to review/comment/discuss the original PR #${PR_NUMBER}.
-          EOF
-
-          LABELS=$( (gh pr --repo "${GITHUB_REPOSITORY}" view ${PR_NUMBER}  --json labels --jq '.labels.[].name'; echo run-e2e-tests-in-draft  )| \
-          grep -E '^run' | paste -sd , -)
-          gh pr --repo "${GITHUB_REPOSITORY}" create --title "CI run for PR #${PR_NUMBER}" \
-                                                       --body-file "body.md" \
-                                                       --head "${BRANCH}" \
-                                                       --base "main" \
-                                                       --label ${LABELS} \
-                                                       --draft
-      - name: Modify the existing pull request (if required)
-        if: steps.get-pr.outputs.ALREADY_CREATED != ''
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          LABELS_TO_ADD: ${{ steps.get-labels.outputs.LABELS_TO_ADD }}
-          LABELS_TO_REMOVE: ${{ steps.get-labels.outputs.LABELS_TO_REMOVE }}
-          ALREADY_CREATED: ${{ steps.get-pr.outputs.ALREADY_CREATED }}
-        run: |
-          ADD_CMD=
-          REMOVE_CMD=
-          [ -z "${LABELS_TO_ADD}" ] || ADD_CMD="--add-label ${LABELS_TO_ADD}"
-          [ -z "${LABELS_TO_REMOVE}" ] || REMOVE_CMD="--remove-label ${LABELS_TO_REMOVE}"
-          if [ -n "${ADD_CMD}" ] || [ -n "${REMOVE_CMD}" ]; then
-            gh pr --repo "${GITHUB_REPOSITORY}" edit ${ALREADY_CREATED} ${ADD_CMD} ${REMOVE_CMD}
-          fi
-
-      - run: git push --force origin "${BRANCH}"
-        if: steps.get-pr.outputs.ALREADY_CREATED != ''
-             
-  cleanup:
-    # Close PRs and delete branchs if the original PR is closed.
-
-    permissions:
-      contents: write # for `--delete-branch` flag in `gh pr close`
-      pull-requests: write # for `gh pr close`
-
-    if: |
-      github.event.action == 'closed' &&
-      github.event.pull_request.head.repo.full_name != github.repository
-
-    runs-on: ubuntu-22.04
-
-    steps:
-      - name: Close PR and delete `ci-run/pr-${{ env.PR_NUMBER }}` branch
-        run: |
-          CLOSED="$(gh pr --repo ${GITHUB_REPOSITORY} list --head ${BRANCH} --json 'closed' --jq '.[].closed')"
-          if [ "${CLOSED}" == "false" ]; then
-            gh pr --repo "${GITHUB_REPOSITORY}" close "${BRANCH}" --delete-branch
-          fi

.github/workflows/benchmarking.yml

@@ -11,7 +11,7 @@ on:
     #          │ │ ┌───────────── day of the month (1 - 31)
     #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
     #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
-    - cron:   '0 3 * * *' # run once a day, timezone is utc
+    - cron:  '0 3 * * *' # run once a day, timezone is utc
 
   workflow_dispatch: # adds ability to run this manually
     inputs:
@@ -23,26 +23,6 @@ on:
         type: boolean
         description: 'Publish perf report. If not set, the report will be published only for the main branch'
         required: false
-      collect_olap_explain:
-        type: boolean
-        description: 'Collect EXPLAIN ANALYZE for OLAP queries. If not set, EXPLAIN ANALYZE will not be collected'
-        required: false
-        default: false
-      collect_pg_stat_statements:
-        type: boolean
-        description: 'Collect pg_stat_statements for OLAP queries. If not set, pg_stat_statements will not be collected'
-        required: false
-        default: false
-      run_AWS_RDS_AND_AURORA:
-        type: boolean
-        description: 'AWS-RDS and AWS-AURORA normally only run on Saturday. Set this to true to run them on every workflow_dispatch'
-        required: false
-        default: false
-      run_only_pgvector_tests:
-        type: boolean
-        description: 'Run pgvector tests but no other tests. If not set, all tests including pgvector tests will be run'
-        required: false
-        default: false
 
 defaults:
   run:
@@ -55,54 +35,28 @@ concurrency:
 
 jobs:
   bench:
-    if: ${{ github.event.inputs.run_only_pgvector_tests == 'false' || github.event.inputs.run_only_pgvector_tests == null }}
-    permissions:
-      contents: write
-      statuses: write
-      id-token: write # Required for OIDC authentication in azure runners
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          - DEFAULT_PG_VERSION: 16
-            PLATFORM: "neon-staging"
-            region_id: ${{ github.event.inputs.region_id || 'aws-us-east-2' }}
-            RUNNER: [ self-hosted, us-east-2, x64 ]
-            IMAGE: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
-          - DEFAULT_PG_VERSION: 16
-            PLATFORM: "azure-staging"
-            region_id: 'azure-eastus2'
-            RUNNER: [ self-hosted, eastus2, x64 ]
-            IMAGE: neondatabase/build-tools:pinned
     env:
       TEST_PG_BENCH_DURATIONS_MATRIX: "300"
       TEST_PG_BENCH_SCALES_MATRIX: "10,100"
       POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: ${{ matrix.DEFAULT_PG_VERSION }}
+      DEFAULT_PG_VERSION: 14
       TEST_OUTPUT: /tmp/test_output
       BUILD_TYPE: remote
       SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
-      PLATFORM: ${{ matrix.PLATFORM }}
+      PLATFORM: "neon-staging"
 
-    runs-on: ${{ matrix.RUNNER }}
+    runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: ${{ matrix.IMAGE }}
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     steps:
-    - uses: actions/checkout@v4
-
-    - name: Configure AWS credentials # necessary on Azure runners
-      uses: aws-actions/configure-aws-credentials@v4
-      with:
-        aws-region: eu-central-1
-        role-to-assume: ${{ vars.DEV_AWS_OIDC_ROLE_ARN }}
-        role-duration-seconds: 18000 # 5 hours
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
       with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
+        name: neon-${{ runner.os }}-release-artifact
         path: /tmp/neon/
         prefix: latest
 
@@ -110,7 +64,7 @@ jobs:
       id: create-neon-project
       uses: ./.github/actions/neon-project-create
       with:
-        region_id: ${{ matrix.region_id }}
+        region_id: ${{ github.event.inputs.region_id || 'aws-us-east-2' }}
         postgres_version: ${{ env.DEFAULT_PG_VERSION }}
         api_key: ${{ secrets.NEON_STAGING_API_KEY }}
 
@@ -121,18 +75,10 @@ jobs:
         test_selection: performance
         run_in_parallel: false
         save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
         # Set --sparse-ordering option of pytest-order plugin
         # to ensure tests are running in order of appears in the file.
         # It's important for test_perf_pgbench.py::test_pgbench_remote_* tests
-        extra_params:
-          -m remote_cluster
-          --sparse-ordering
-          --timeout 14400
-          --ignore test_runner/performance/test_perf_olap.py
-          --ignore test_runner/performance/test_perf_pgvector_queries.py
-          --ignore test_runner/performance/test_logical_replication.py
-          --ignore test_runner/performance/test_physical_replication.py
+        extra_params: -m remote_cluster --sparse-ordering --timeout 5400 --ignore test_runner/performance/test_perf_olap.py
       env:
         BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
@@ -146,7 +92,6 @@ jobs:
         api_key: ${{ secrets.NEON_STAGING_API_KEY }}
 
     - name: Create Allure report
-      id: create-allure-report
       if: ${{ !cancelled() }}
       uses: ./.github/actions/allure-report-generate
 
@@ -155,196 +100,66 @@ jobs:
       uses: slackapi/slack-github-action@v1
       with:
         channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: |
-          Periodic perf testing: ${{ job.status }}
-          <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|GitHub Run>
-          <${{ steps.create-allure-report.outputs.report-url }}|Allure report>
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
-
-  replication-tests:
-    if: ${{ github.event.inputs.run_only_pgvector_tests == 'false' || github.event.inputs.run_only_pgvector_tests == null }}
-    env:
-      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 16
-      TEST_OUTPUT: /tmp/test_output
-      BUILD_TYPE: remote
-      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
-      PLATFORM: "neon-staging"
-
-    runs-on: [ self-hosted, us-east-2, x64 ]
-    container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
-      options: --init
-
-    steps:
-    - uses: actions/checkout@v4
-
-
-    - name: Download Neon artifact
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
-        path: /tmp/neon/
-        prefix: latest
-
-    - name: Run Logical Replication benchmarks
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance/test_logical_replication.py
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 5400
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
-      env:
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-        NEON_API_KEY: ${{ secrets.NEON_STAGING_API_KEY }}
-        BENCHMARK_PROJECT_ID_PUB: ${{ vars.BENCHMARK_PROJECT_ID_PUB }}
-        BENCHMARK_PROJECT_ID_SUB: ${{ vars.BENCHMARK_PROJECT_ID_SUB }}
-
-    - name: Run Physical Replication benchmarks
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance/test_physical_replication.py
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 5400
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
-      env:
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-        NEON_API_KEY: ${{ secrets.NEON_STAGING_API_KEY }}
-
-    - name: Create Allure report
-      id: create-allure-report
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-generate
-      with:
-        store-test-results-into-db: true
-      env:
-        REGRESS_TEST_RESULT_CONNSTR_NEW: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C06T9AMNDQQ" # on-call-compute-staging-stream
-        slack-message: |
-          Periodic replication testing: ${{ job.status }}
-          <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|GitHub Run>
-          <${{ steps.create-allure-report.outputs.report-url }}|Allure report>
+        slack-message: "Periodic perf testing: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
       env:
         SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
 
   generate-matrices:
-    if: ${{ github.event.inputs.run_only_pgvector_tests == 'false' || github.event.inputs.run_only_pgvector_tests == null }}
     # Create matrices for the benchmarking jobs, so we run benchmarks on rds only once a week (on Saturday)
     #
     # Available platforms:
-    # - neonvm-captest-new: Freshly created project (1 CU)
-    # - neonvm-captest-freetier: Use freetier-sized compute (0.25 CU)
-    # - neonvm-captest-azure-new: Freshly created project (1 CU) in azure region
-    # - neonvm-captest-azure-freetier: Use freetier-sized compute (0.25 CU) in azure region
-    # - neonvm-captest-reuse: Reusing existing project
+    # - neon-captest-new: Freshly created project (1 CU)
+    # - neon-captest-freetier: Use freetier-sized compute (0.25 CU)
+    # - neon-captest-reuse: Reusing existing project
     # - rds-aurora: Aurora Postgres Serverless v2 with autoscaling from 0.5 to 2 ACUs
     # - rds-postgres: RDS Postgres db.m5.large instance (2 vCPU, 8 GiB) with gp3 EBS storage
-    env:
-      RUN_AWS_RDS_AND_AURORA: ${{ github.event.inputs.run_AWS_RDS_AND_AURORA || 'false' }}
-      DEFAULT_REGION_ID: ${{ github.event.inputs.region_id || 'aws-us-east-2' }}
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     outputs:
       pgbench-compare-matrix: ${{ steps.pgbench-compare-matrix.outputs.matrix }}
       olap-compare-matrix: ${{ steps.olap-compare-matrix.outputs.matrix }}
-      tpch-compare-matrix: ${{ steps.tpch-compare-matrix.outputs.matrix }}
 
     steps:
     - name: Generate matrix for pgbench benchmark
       id: pgbench-compare-matrix
       run: |
-        region_id_default=${{ env.DEFAULT_REGION_ID }}
-        runner_default='["self-hosted", "us-east-2", "x64"]'
-        runner_azure='["self-hosted", "eastus2", "x64"]'
-        image_default="369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned"
         matrix='{
-          "pg_version" : [
-            16
-          ],
-          "region_id" : [
-            "'"$region_id_default"'"
-            ],
           "platform": [
-            "neonvm-captest-new",
-            "neonvm-captest-reuse",
+            "neon-captest-new",
+            "neon-captest-reuse",
             "neonvm-captest-new"
           ],
           "db_size": [ "10gb" ],
-          "runner": ['"$runner_default"'],
-          "image": [ "'"$image_default"'" ],
-          "include": [{ "pg_version": 16, "region_id": "'"$region_id_default"'", "platform": "neonvm-captest-freetier",       "db_size": "3gb" ,"runner": '"$runner_default"', "image": "'"$image_default"'" },
-                      { "pg_version": 16, "region_id": "'"$region_id_default"'", "platform": "neonvm-captest-new",            "db_size": "10gb","runner": '"$runner_default"', "image": "'"$image_default"'" },
-                      { "pg_version": 16, "region_id": "'"$region_id_default"'", "platform": "neonvm-captest-new",            "db_size": "50gb","runner": '"$runner_default"', "image": "'"$image_default"'" },
-                      { "pg_version": 16, "region_id": "azure-eastus2",          "platform": "neonvm-azure-captest-freetier", "db_size": "3gb" ,"runner": '"$runner_azure"',   "image": "neondatabase/build-tools:pinned" },
-                      { "pg_version": 16, "region_id": "azure-eastus2",          "platform": "neonvm-azure-captest-new",      "db_size": "10gb","runner": '"$runner_azure"',   "image": "neondatabase/build-tools:pinned" },
-                      { "pg_version": 16, "region_id": "azure-eastus2",          "platform": "neonvm-azure-captest-new",      "db_size": "50gb","runner": '"$runner_azure"',   "image": "neondatabase/build-tools:pinned" },
-                      { "pg_version": 16, "region_id": "'"$region_id_default"'", "platform": "neonvm-captest-sharding-reuse", "db_size": "50gb","runner": '"$runner_default"', "image": "'"$image_default"'" }]
+          "include": [{ "platform": "neon-captest-freetier",   "db_size": "3gb"  },
+                      { "platform": "neon-captest-new",        "db_size": "50gb" },
+                      { "platform": "neonvm-captest-freetier", "db_size": "3gb"  },
+                      { "platform": "neonvm-captest-new",      "db_size": "50gb" }]
         }'
 
-        if [ "$(date +%A)" = "Saturday" ] || [ ${RUN_AWS_RDS_AND_AURORA} = "true" ]; then
-          matrix=$(echo "$matrix" | jq '.include += [{ "pg_version": 16, "region_id": "'"$region_id_default"'", "platform": "rds-postgres", "db_size": "10gb","runner": '"$runner_default"', "image": "'"$image_default"'" },
-                                                     { "pg_version": 16, "region_id": "'"$region_id_default"'", "platform": "rds-aurora", "db_size": "10gb","runner": '"$runner_default"', "image": "'"$image_default"'" }]')
+        if [ "$(date +%A)" = "Saturday" ]; then
+          matrix=$(echo $matrix | jq '.include += [{ "platform": "rds-postgres", "db_size": "10gb"},
+                                                   { "platform": "rds-aurora",   "db_size": "50gb"}]')
         fi
 
-        echo "matrix=$(echo "$matrix" | jq --compact-output '.')" >> $GITHUB_OUTPUT
+        echo "matrix=$(echo $matrix | jq --compact-output '.')" >> $GITHUB_OUTPUT
 
     - name: Generate matrix for OLAP benchmarks
       id: olap-compare-matrix
       run: |
         matrix='{
           "platform": [
-            "neonvm-captest-reuse"
+            "neon-captest-reuse"
           ]
         }'
 
-        if [ "$(date +%A)" = "Saturday" ] || [ ${RUN_AWS_RDS_AND_AURORA} = "true" ]; then
-          matrix=$(echo "$matrix" | jq '.include += [{ "platform": "rds-postgres" },
-                                                     { "platform": "rds-aurora"   }]')
+        if [ "$(date +%A)" = "Saturday" ]; then
+          matrix=$(echo $matrix | jq '.include += [{ "platform": "rds-postgres" },
+                                                   { "platform": "rds-aurora"   }]')
         fi
 
-        echo "matrix=$(echo "$matrix" | jq --compact-output '.')" >> $GITHUB_OUTPUT
-
-    - name: Generate matrix for TPC-H benchmarks
-      id: tpch-compare-matrix
-      run: |
-        matrix='{
-          "platform": [
-            "neonvm-captest-reuse"
-          ],
-          "scale": [
-            "10"
-          ]
-        }'
-
-        if [ "$(date +%A)" = "Saturday" ] || [ ${RUN_AWS_RDS_AND_AURORA} = "true" ]; then
-          matrix=$(echo "$matrix" | jq '.include += [{ "platform": "rds-postgres", "scale": "10" },
-                                                     { "platform": "rds-aurora",   "scale": "10" }]')
-        fi
-
-        echo "matrix=$(echo "$matrix" | jq --compact-output '.')" >> $GITHUB_OUTPUT
-
-  prepare_AWS_RDS_databases:
-    uses: ./.github/workflows/_benchmarking_preparation.yml
-    secrets: inherit
+        echo "matrix=$(echo $matrix | jq --compact-output '.')" >> $GITHUB_OUTPUT
 
   pgbench-compare:
-    if: ${{ github.event.inputs.run_only_pgvector_tests == 'false' || github.event.inputs.run_only_pgvector_tests == null }}
-    needs: [ generate-matrices, prepare_AWS_RDS_databases ]
-    permissions:
-      contents: write
-      statuses: write
-      id-token: write # Required for OIDC authentication in azure runners
+    needs: [ generate-matrices ]
 
     strategy:
       fail-fast: false
@@ -354,58 +169,53 @@ jobs:
       TEST_PG_BENCH_DURATIONS_MATRIX: "60m"
       TEST_PG_BENCH_SCALES_MATRIX: ${{ matrix.db_size }}
       POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: ${{ matrix.pg_version }}
+      DEFAULT_PG_VERSION: 14
       TEST_OUTPUT: /tmp/test_output
       BUILD_TYPE: remote
       SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
       PLATFORM: ${{ matrix.platform }}
 
-    runs-on: ${{ matrix.runner }}
+    runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: ${{ matrix.image }}
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
-    # Increase timeout to 8h, default timeout is 6h
-    timeout-minutes: 480
+    timeout-minutes: 360 # 6h
 
     steps:
-    - uses: actions/checkout@v4
-
-    - name: Configure AWS credentials # necessary on Azure runners
-      uses: aws-actions/configure-aws-credentials@v4
-      with:
-        aws-region: eu-central-1
-        role-to-assume: ${{ vars.DEV_AWS_OIDC_ROLE_ARN }}
-        role-duration-seconds: 18000 # 5 hours
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
       with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
+        name: neon-${{ runner.os }}-release-artifact
         path: /tmp/neon/
         prefix: latest
 
+    - name: Add Postgres binaries to PATH
+      run: |
+        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
+        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
+
     - name: Create Neon Project
-      if: contains(fromJson('["neonvm-captest-new", "neonvm-captest-freetier", "neonvm-azure-captest-freetier", "neonvm-azure-captest-new"]'), matrix.platform)
+      if: contains(fromJson('["neon-captest-new", "neon-captest-freetier", "neonvm-captest-new", "neonvm-captest-freetier"]'), matrix.platform)
       id: create-neon-project
       uses: ./.github/actions/neon-project-create
       with:
-        region_id: ${{ matrix.region_id }}
+        region_id: ${{ github.event.inputs.region_id || 'aws-us-east-2' }}
         postgres_version: ${{ env.DEFAULT_PG_VERSION }}
         api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-        compute_units: ${{ (contains(matrix.platform, 'captest-freetier') && '[0.25, 0.25]') || '[1, 1]' }}
+        compute_units: ${{ (matrix.platform == 'neon-captest-freetier' && '[0.25, 0.25]') || '[1, 1]' }}
+        provisioner: ${{ (contains(matrix.platform, 'neonvm-') && 'k8s-neonvm') || 'k8s-pod' }}
 
     - name: Set up Connection String
       id: set-up-connstr
       run: |
         case "${PLATFORM}" in
-          neonvm-captest-reuse)
+          neon-captest-reuse)
             CONNSTR=${{ secrets.BENCHMARK_CAPTEST_CONNSTR }}
             ;;
-          neonvm-captest-sharding-reuse)
-            CONNSTR=${{ secrets.BENCHMARK_CAPTEST_SHARDING_CONNSTR }}
-            ;;
-          neonvm-captest-new | neonvm-captest-freetier | neonvm-azure-captest-new | neonvm-azure-captest-freetier)
+          neon-captest-new | neon-captest-freetier | neonvm-captest-new | neonvm-captest-freetier)
             CONNSTR=${{ steps.create-neon-project.outputs.dsn }}
             ;;
           rds-aurora)
@@ -422,6 +232,8 @@ jobs:
 
         echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
+        psql ${CONNSTR} -c "SELECT version();"
+
     - name: Benchmark init
       uses: ./.github/actions/run-python-test-set
       with:
@@ -430,7 +242,6 @@ jobs:
         run_in_parallel: false
         save_perf_report: ${{ env.SAVE_PERF_REPORT }}
         extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_init
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
       env:
         BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
@@ -444,7 +255,6 @@ jobs:
         run_in_parallel: false
         save_perf_report: ${{ env.SAVE_PERF_REPORT }}
         extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_simple_update
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
       env:
         BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
@@ -458,7 +268,6 @@ jobs:
         run_in_parallel: false
         save_perf_report: ${{ env.SAVE_PERF_REPORT }}
         extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_select_only
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
       env:
         BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
@@ -472,7 +281,6 @@ jobs:
         api_key: ${{ secrets.NEON_STAGING_API_KEY }}
 
     - name: Create Allure report
-      id: create-allure-report
       if: ${{ !cancelled() }}
       uses: ./.github/actions/allure-report-generate
 
@@ -481,133 +289,7 @@ jobs:
       uses: slackapi/slack-github-action@v1
       with:
         channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: |
-          Periodic perf testing on ${{ matrix.platform }}: ${{ job.status }}
-          <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|GitHub Run>
-          <${{ steps.create-allure-report.outputs.report-url }}|Allure report>
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
-
-  pgbench-pgvector:
-    permissions:
-      contents: write
-      statuses: write
-      id-token: write # Required for OIDC authentication in azure runners
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          - PLATFORM: "neonvm-captest-pgvector"
-            RUNNER: [ self-hosted, us-east-2, x64 ]
-            IMAGE: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
-          - PLATFORM: "azure-captest-pgvector"
-            RUNNER: [ self-hosted, eastus2, x64 ]
-            IMAGE: neondatabase/build-tools:pinned
-
-    env:
-      TEST_PG_BENCH_DURATIONS_MATRIX: "15m"
-      TEST_PG_BENCH_SCALES_MATRIX: "1"
-      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 16
-      TEST_OUTPUT: /tmp/test_output
-      BUILD_TYPE: remote
-      LD_LIBRARY_PATH: /home/nonroot/pg/usr/lib/x86_64-linux-gnu
-      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
-      PLATFORM: ${{ matrix.PLATFORM }}
-
-    runs-on: ${{ matrix.RUNNER }}
-    container:
-      image: ${{ matrix.IMAGE }}
-      options: --init
-
-    steps:
-    - uses: actions/checkout@v4
-
-    # until https://github.com/neondatabase/neon/issues/8275 is fixed we temporarily install postgresql-16
-    # instead of using Neon artifacts containing pgbench
-    - name: Install postgresql-16 where pytest expects it
-      run: |
-        cd /home/nonroot
-        wget -q https://apt.postgresql.org/pub/repos/apt/pool/main/p/postgresql-16/libpq5_16.4-1.pgdg110%2B1_amd64.deb
-        wget -q https://apt.postgresql.org/pub/repos/apt/pool/main/p/postgresql-16/postgresql-client-16_16.4-1.pgdg110%2B1_amd64.deb
-        wget -q https://apt.postgresql.org/pub/repos/apt/pool/main/p/postgresql-16/postgresql-16_16.4-1.pgdg110%2B1_amd64.deb 
-        dpkg -x libpq5_16.4-1.pgdg110+1_amd64.deb pg
-        dpkg -x postgresql-client-16_16.4-1.pgdg110+1_amd64.deb pg
-        dpkg -x postgresql-16_16.4-1.pgdg110+1_amd64.deb pg
-        mkdir -p /tmp/neon/pg_install/v16/bin
-        ln -s /home/nonroot/pg/usr/lib/postgresql/16/bin/pgbench /tmp/neon/pg_install/v16/bin/pgbench  
-        ln -s /home/nonroot/pg/usr/lib/postgresql/16/bin/psql /tmp/neon/pg_install/v16/bin/psql  
-        ln -s /home/nonroot/pg/usr/lib/x86_64-linux-gnu /tmp/neon/pg_install/v16/lib 
-        /tmp/neon/pg_install/v16/bin/pgbench --version
-        /tmp/neon/pg_install/v16/bin/psql --version
-
-    - name: Set up Connection String
-      id: set-up-connstr
-      run: |
-        case "${PLATFORM}" in
-          neonvm-captest-pgvector)
-            CONNSTR=${{ secrets.BENCHMARK_PGVECTOR_CONNSTR }}
-            ;;
-          azure-captest-pgvector)
-            CONNSTR=${{ secrets.BENCHMARK_PGVECTOR_CONNSTR_AZURE }}
-            ;;
-          *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}"
-            exit 1
-            ;;
-        esac
-
-        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
-
-    - name: Configure AWS credentials # necessary on Azure runners to read/write from/to S3
-      uses: aws-actions/configure-aws-credentials@v4
-      with:
-        aws-region: eu-central-1
-        role-to-assume: ${{ vars.DEV_AWS_OIDC_ROLE_ARN }}
-        role-duration-seconds: 18000 # 5 hours
-
-    - name: Benchmark pgvector hnsw indexing
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance/test_perf_olap.py
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600 -k test_pgvector_indexing
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
-      env:
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-
-    - name: Benchmark pgvector queries
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: ${{ env.BUILD_TYPE }}
-        test_selection: performance/test_perf_pgvector_queries.py
-        run_in_parallel: false
-        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-
-    - name: Create Allure report
-      id: create-allure-report
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-generate
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: |
-          Periodic perf testing on ${{ env.PLATFORM }}: ${{ job.status }}
-          <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|GitHub Run>
-          <${{ steps.create-allure-report.outputs.report-url }}|Allure report>
+        slack-message: "Periodic perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
       env:
         SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
 
@@ -619,8 +301,8 @@ jobs:
     #
     # *_CLICKBENCH_CONNSTR: Genuine ClickBench DB with ~100M rows
     # *_CLICKBENCH_10M_CONNSTR: DB with the first 10M rows of ClickBench DB
-    if: ${{ !cancelled() && (github.event.inputs.run_only_pgvector_tests == 'false' || github.event.inputs.run_only_pgvector_tests == null) }}
-    needs: [ generate-matrices, pgbench-compare, prepare_AWS_RDS_databases ]
+    if: ${{ !cancelled() }}
+    needs: [ generate-matrices, pgbench-compare ]
 
     strategy:
       fail-fast: false
@@ -628,34 +310,39 @@ jobs:
 
     env:
       POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 16
+      DEFAULT_PG_VERSION: 14
       TEST_OUTPUT: /tmp/test_output
-      TEST_OLAP_COLLECT_EXPLAIN: ${{ github.event.inputs.collect_olap_explain }}
-      TEST_OLAP_COLLECT_PG_STAT_STATEMENTS: ${{ github.event.inputs.collect_pg_stat_statements }}
       BUILD_TYPE: remote
       SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
       PLATFORM: ${{ matrix.platform }}
 
     runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
+    timeout-minutes: 360 # 6h
+
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
       with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
+        name: neon-${{ runner.os }}-release-artifact
         path: /tmp/neon/
         prefix: latest
 
+    - name: Add Postgres binaries to PATH
+      run: |
+        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
+        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
+
     - name: Set up Connection String
       id: set-up-connstr
       run: |
         case "${PLATFORM}" in
-          neonvm-captest-reuse)
+          neon-captest-reuse)
             CONNSTR=${{ secrets.BENCHMARK_CAPTEST_CLICKBENCH_10M_CONNSTR }}
             ;;
           rds-aurora)
@@ -665,13 +352,15 @@ jobs:
             CONNSTR=${{ secrets.BENCHMARK_RDS_POSTGRES_CLICKBENCH_10M_CONNSTR }}
             ;;
           *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neonvm-captest-reuse', 'rds-aurora', or 'rds-postgres'"
+            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
             exit 1
             ;;
         esac
 
         echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
+        psql ${CONNSTR} -c "SELECT version();"
+
     - name: ClickBench benchmark
       uses: ./.github/actions/run-python-test-set
       with:
@@ -680,17 +369,12 @@ jobs:
         run_in_parallel: false
         save_perf_report: ${{ env.SAVE_PERF_REPORT }}
         extra_params: -m remote_cluster --timeout 21600 -k test_clickbench
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
       env:
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
         PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-        TEST_OLAP_COLLECT_EXPLAIN: ${{ github.event.inputs.collect_olap_explain || 'false' }}
-        TEST_OLAP_COLLECT_PG_STAT_STATEMENTS: ${{ github.event.inputs.collect_pg_stat_statements || 'false' }}
         BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-        TEST_OLAP_SCALE: 10
 
     - name: Create Allure report
-      id: create-allure-report
       if: ${{ !cancelled() }}
       uses: ./.github/actions/allure-report-generate
 
@@ -699,10 +383,7 @@ jobs:
       uses: slackapi/slack-github-action@v1
       with:
         channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: |
-          Periodic OLAP perf testing on ${{ matrix.platform }}: ${{ job.status }}
-          <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|GitHub Run>
-          <${{ steps.create-allure-report.outputs.report-url }}|Allure report>
+        slack-message: "Periodic OLAP perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
       env:
         SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
 
@@ -713,65 +394,66 @@ jobs:
     # We might change it after https://github.com/neondatabase/neon/issues/2900.
     #
     # *_TPCH_S10_CONNSTR: DB generated with scale factor 10 (~10 GB)
-    if: ${{ !cancelled() && (github.event.inputs.run_only_pgvector_tests == 'false' || github.event.inputs.run_only_pgvector_tests == null) }}
-    needs: [ generate-matrices, clickbench-compare, prepare_AWS_RDS_databases ]
+    if: ${{ !cancelled() }}
+    needs: [ generate-matrices, clickbench-compare ]
 
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.generate-matrices.outputs.tpch-compare-matrix) }}
+      matrix: ${{ fromJson(needs.generate-matrices.outputs.olap-compare-matrix) }}
 
     env:
       POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 16
+      DEFAULT_PG_VERSION: 14
       TEST_OUTPUT: /tmp/test_output
       BUILD_TYPE: remote
       SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
       PLATFORM: ${{ matrix.platform }}
-      TEST_OLAP_SCALE: ${{ matrix.scale }}
 
     runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
+    timeout-minutes: 360 # 6h
+
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
       with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
+        name: neon-${{ runner.os }}-release-artifact
         path: /tmp/neon/
         prefix: latest
 
-    - name: Get Connstring Secret Name
+    - name: Add Postgres binaries to PATH
       run: |
-        case "${PLATFORM}" in
-          neonvm-captest-reuse)
-            ENV_PLATFORM=CAPTEST_TPCH
-            ;;
-          rds-aurora)
-            ENV_PLATFORM=RDS_AURORA_TPCH
-            ;;
-          rds-postgres)
-            ENV_PLATFORM=RDS_POSTGRES_TPCH
-            ;;
-          *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neonvm-captest-reuse', 'rds-aurora', or 'rds-postgres'"
-            exit 1
-            ;;
-        esac
-
-        CONNSTR_SECRET_NAME="BENCHMARK_${ENV_PLATFORM}_S${TEST_OLAP_SCALE}_CONNSTR"
-        echo "CONNSTR_SECRET_NAME=${CONNSTR_SECRET_NAME}" >> $GITHUB_ENV
+        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
+        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
 
     - name: Set up Connection String
       id: set-up-connstr
       run: |
-        CONNSTR=${{ secrets[env.CONNSTR_SECRET_NAME] }}
+        case "${PLATFORM}" in
+          neon-captest-reuse)
+            CONNSTR=${{ secrets.BENCHMARK_CAPTEST_TPCH_S10_CONNSTR }}
+            ;;
+          rds-aurora)
+            CONNSTR=${{ secrets.BENCHMARK_RDS_AURORA_TPCH_S10_CONNSTR }}
+            ;;
+          rds-postgres)
+            CONNSTR=${{ secrets.BENCHMARK_RDS_POSTGRES_TPCH_S10_CONNSTR }}
+            ;;
+          *)
+            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
+            exit 1
+            ;;
+        esac
 
         echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
+        psql ${CONNSTR} -c "SELECT version();"
+
     - name: Run TPC-H benchmark
       uses: ./.github/actions/run-python-test-set
       with:
@@ -780,15 +462,12 @@ jobs:
         run_in_parallel: false
         save_perf_report: ${{ env.SAVE_PERF_REPORT }}
         extra_params: -m remote_cluster --timeout 21600 -k test_tpch
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
       env:
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
         PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
         BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
-        TEST_OLAP_SCALE: ${{ matrix.scale }}
 
     - name: Create Allure report
-      id: create-allure-report
       if: ${{ !cancelled() }}
       uses: ./.github/actions/allure-report-generate
 
@@ -797,16 +476,13 @@ jobs:
       uses: slackapi/slack-github-action@v1
       with:
         channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: |
-          Periodic TPC-H perf testing on ${{ matrix.platform }}: ${{ job.status }}
-          <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|GitHub Run>
-          <${{ steps.create-allure-report.outputs.report-url }}|Allure report>
+        slack-message: "Periodic TPC-H perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
       env:
         SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
 
   user-examples-compare:
-    if: ${{ !cancelled() && (github.event.inputs.run_only_pgvector_tests == 'false' || github.event.inputs.run_only_pgvector_tests == null) }}
-    needs: [ generate-matrices, tpch-compare, prepare_AWS_RDS_databases ]
+    if: ${{ !cancelled() }}
+    needs: [ generate-matrices, tpch-compare ]
 
     strategy:
       fail-fast: false
@@ -814,7 +490,7 @@ jobs:
 
     env:
       POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      DEFAULT_PG_VERSION: 16
+      DEFAULT_PG_VERSION: 14
       TEST_OUTPUT: /tmp/test_output
       BUILD_TYPE: remote
       SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
@@ -822,24 +498,31 @@ jobs:
 
     runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
+    timeout-minutes: 360 # 6h
+
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
       with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
+        name: neon-${{ runner.os }}-release-artifact
         path: /tmp/neon/
         prefix: latest
 
+    - name: Add Postgres binaries to PATH
+      run: |
+        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
+        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
+
     - name: Set up Connection String
       id: set-up-connstr
       run: |
         case "${PLATFORM}" in
-          neonvm-captest-reuse)
+          neon-captest-reuse)
             CONNSTR=${{ secrets.BENCHMARK_USER_EXAMPLE_CAPTEST_CONNSTR }}
             ;;
           rds-aurora)
@@ -849,13 +532,15 @@ jobs:
             CONNSTR=${{ secrets.BENCHMARK_USER_EXAMPLE_RDS_POSTGRES_CONNSTR }}
             ;;
           *)
-            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neonvm-captest-reuse', 'rds-aurora', or 'rds-postgres'"
+            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
             exit 1
             ;;
         esac
 
         echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
+        psql ${CONNSTR} -c "SELECT version();"
+
     - name: Run user examples
       uses: ./.github/actions/run-python-test-set
       with:
@@ -864,14 +549,12 @@ jobs:
         run_in_parallel: false
         save_perf_report: ${{ env.SAVE_PERF_REPORT }}
         extra_params: -m remote_cluster --timeout 21600 -k test_user_examples
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
       env:
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
         PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
         BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
 
     - name: Create Allure report
-      id: create-allure-report
       if: ${{ !cancelled() }}
       uses: ./.github/actions/allure-report-generate
 
@@ -880,10 +563,6 @@ jobs:
       uses: slackapi/slack-github-action@v1
       with:
         channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: |
-          Periodic TPC-H perf testing on ${{ matrix.platform }}: ${{ job.status }}
-          <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|GitHub Run>
-          <${{ steps.create-allure-report.outputs.report-url }}|Allure report>
-
+        slack-message: "Periodic User example perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
       env:
         SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}

.github/workflows/build-build-tools-image.yml

@@ -1,103 +0,0 @@
-name: Build build-tools image
-
-on:
-  workflow_call:
-    inputs:
-      image-tag:
-        description: "build-tools image tag"
-        required: true
-        type: string
-    outputs:
-      image-tag:
-        description: "build-tools tag"
-        value: ${{ inputs.image-tag }}
-      image:
-        description: "build-tools image"
-        value: neondatabase/build-tools:${{ inputs.image-tag }}
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-concurrency:
-  group: build-build-tools-image-${{ inputs.image-tag }}
-  cancel-in-progress: false
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-jobs:
-  check-image:
-    uses: ./.github/workflows/check-build-tools-image.yml
-
-  build-image:
-    needs: [ check-image ]
-    if: needs.check-image.outputs.found == 'false'
-
-    strategy:
-      matrix:
-        arch: [ x64, arm64 ]
-
-    runs-on: ${{ fromJson(format('["self-hosted", "{0}"]', matrix.arch == 'arm64' && 'large-arm64' || 'large')) }}
-
-    env:
-      IMAGE_TAG: ${{ inputs.image-tag }}
-
-    steps:
-      - name: Check `input.tag` is correct
-        env:
-          INPUTS_IMAGE_TAG: ${{ inputs.image-tag }}
-          CHECK_IMAGE_TAG : ${{ needs.check-image.outputs.image-tag }}
-        run: |
-          if [ "${INPUTS_IMAGE_TAG}" != "${CHECK_IMAGE_TAG}" ]; then
-            echo "'inputs.image-tag' (${INPUTS_IMAGE_TAG}) does not match the tag of the latest build-tools image 'inputs.image-tag' (${CHECK_IMAGE_TAG})"
-            exit 1
-          fi
-
-      - uses: actions/checkout@v4
-
-      - uses: ./.github/actions/set-docker-config-dir
-      - uses: docker/setup-buildx-action@v3
-        with:
-          cache-binary: false
-
-      - uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-          password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-
-      - uses: docker/login-action@v3
-        with:
-          registry: cache.neon.build
-          username: ${{ secrets.NEON_CI_DOCKERCACHE_USERNAME }}
-          password: ${{ secrets.NEON_CI_DOCKERCACHE_PASSWORD }}
-
-      - uses: docker/build-push-action@v6
-        with:
-          context: .
-          provenance: false
-          push: true
-          pull: true
-          file: Dockerfile.build-tools
-          cache-from: type=registry,ref=cache.neon.build/build-tools:cache-${{ matrix.arch }}
-          cache-to: ${{ github.ref_name == 'main' && format('type=registry,ref=cache.neon.build/build-tools:cache-{0},mode=max', matrix.arch) || '' }}
-          tags: neondatabase/build-tools:${{ inputs.image-tag }}-${{ matrix.arch }}
-
-  merge-images:
-    needs: [ build-image ]
-    runs-on: ubuntu-22.04
-
-    env:
-      IMAGE_TAG: ${{ inputs.image-tag }}
-
-    steps:
-      - uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-          password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-
-      - name: Create multi-arch image
-        run: |
-          docker buildx imagetools create -t neondatabase/build-tools:${IMAGE_TAG} \
-                                             neondatabase/build-tools:${IMAGE_TAG}-x64 \
-                                             neondatabase/build-tools:${IMAGE_TAG}-arm64

.github/workflows/check-build-tools-image.yml

@@ -1,51 +0,0 @@
-name: Check build-tools image
-
-on:
-  workflow_call:
-    outputs:
-      image-tag:
-        description: "build-tools image tag"
-        value: ${{ jobs.check-image.outputs.tag }}
-      found:
-        description: "Whether the image is found in the registry"
-        value: ${{ jobs.check-image.outputs.found }}
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-jobs:
-  check-image:
-    runs-on: ubuntu-22.04
-    outputs:
-      tag: ${{ steps.get-build-tools-tag.outputs.image-tag }}
-      found: ${{ steps.check-image.outputs.found }}
-
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Get build-tools image tag for the current commit
-        id: get-build-tools-tag
-        env:
-          IMAGE_TAG: |
-            ${{ hashFiles('Dockerfile.build-tools',
-                          '.github/workflows/check-build-tools-image.yml',
-                          '.github/workflows/build-build-tools-image.yml') }}
-        run: |
-          echo "image-tag=${IMAGE_TAG}" | tee -a $GITHUB_OUTPUT
-
-      - name: Check if such tag found in the registry
-        id: check-image
-        env:
-          IMAGE_TAG: ${{ steps.get-build-tools-tag.outputs.image-tag }}
-        run: |
-          if docker manifest inspect neondatabase/build-tools:${IMAGE_TAG}; then
-            found=true
-          else
-            found=false
-          fi
-
-          echo "found=${found}" | tee -a $GITHUB_OUTPUT

.github/workflows/check-permissions.yml

@@ -1,36 +0,0 @@
-name: Check Permissions
-
-on:
-  workflow_call:
-    inputs:
-      github-event-name:
-        required: true
-        type: string
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-jobs:
-  check-permissions:
-    runs-on: ubuntu-22.04
-    steps:
-    - name: Disallow CI runs on PRs from forks
-      if: |
-        inputs.github-event-name  == 'pull_request' &&
-        github.event.pull_request.head.repo.full_name != github.repository
-      run: |
-        if [ "${{ contains(fromJSON('["OWNER", "MEMBER", "COLLABORATOR"]'), github.event.pull_request.author_association) }}" = "true" ]; then
-          MESSAGE="Please create a PR from a branch of ${GITHUB_REPOSITORY} instead of a fork"
-        else
-          MESSAGE="The PR should be reviewed and labelled with 'approved-for-ci-run' to trigger a CI run"
-        fi
-
-        # TODO: use actions/github-script to post this message as a PR comment
-        echo >&2 "We don't run CI for PRs from forks"
-        echo >&2 "${MESSAGE}"
-
-        exit 1

.github/workflows/cleanup-caches-by-a-branch.yml

@@ -1,32 +0,0 @@
-# A workflow from
-# https://docs.github.com/en/actions/using-workflows/caching-dependencies-to-speed-up-workflows#force-deleting-cache-entries
-
-name: cleanup caches by a branch
-on:
-  pull_request:
-    types:
-      - closed
-
-jobs:
-  cleanup:
-    runs-on: ubuntu-22.04
-    steps:
-      - name: Cleanup
-        run: |
-          gh extension install actions/gh-actions-cache
-
-          echo "Fetching list of cache key"
-          cacheKeysForPR=$(gh actions-cache list -R $REPO -B $BRANCH -L 100 | cut -f 1 )
-
-          ## Setting this to not fail the workflow while deleting cache keys.
-          set +e
-          echo "Deleting caches..."
-          for cacheKey in $cacheKeysForPR
-          do
-              gh actions-cache delete $cacheKey -R $REPO -B $BRANCH --confirm
-          done
-          echo "Done"
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          REPO: ${{ github.repository }}
-          BRANCH: refs/pull/${{ github.event.pull_request.number }}/merge

.github/workflows/label-for-external-users.yml

@@ -1,78 +0,0 @@
-name: Add `external` label to issues and PRs created by external users
-
-on:
-  issues:
-    types:
-      - opened
-  pull_request_target:
-    types:
-      - opened
-  workflow_dispatch:
-    inputs:
-      github-actor:
-        description: 'GitHub username. If empty, the username of the current user will be used'
-        required: false
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-env:
-  LABEL: external
-
-jobs:
-  check-user:
-    runs-on: ubuntu-22.04
-
-    outputs:
-      is-member: ${{ steps.check-user.outputs.is-member }}
-
-    steps:
-    - name: Check whether `${{ github.actor }}` is a member of `${{ github.repository_owner }}`
-      id: check-user
-      env:
-        GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        ACTOR: ${{ inputs.github-actor || github.actor }}
-      run: |
-        expected_error="User does not exist or is not a member of the organization"
-        output_file=output.txt
-
-        for i in $(seq 1 10); do
-          if gh api "/orgs/${GITHUB_REPOSITORY_OWNER}/members/${ACTOR}" \
-              -H "Accept: application/vnd.github+json" \
-              -H "X-GitHub-Api-Version: 2022-11-28" > ${output_file}; then
-
-            is_member=true
-            break
-          elif grep -q "${expected_error}" ${output_file}; then
-            is_member=false
-            break
-          elif [ $i -eq 10 ]; then
-            title="Failed to get memmbership status for ${ACTOR}"
-            message="The latest GitHub API error message: '$(cat ${output_file})'"
-            echo "::error file=.github/workflows/label-for-external-users.yml,title=${title}::${message}"
-
-            exit 1
-          fi
-
-          sleep 1
-        done
-
-        echo "is-member=${is_member}" | tee -a ${GITHUB_OUTPUT}
-
-  add-label:
-    if: needs.check-user.outputs.is-member == 'false'
-    needs: [ check-user ]
-
-    runs-on: ubuntu-22.04
-    permissions:
-      pull-requests: write # for `gh pr edit`
-      issues: write        # for `gh issue edit`
-
-    steps:
-    - name: Add `${{ env.LABEL }}` label
-      env:
-        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        ITEM_NUMBER: ${{ github.event[github.event_name == 'pull_request_target' && 'pull_request' || 'issue'].number }}
-        GH_CLI_COMMAND: ${{ github.event_name == 'pull_request_target' && 'pr' || 'issue' }}
-      run: |
-        gh ${GH_CLI_COMMAND} --repo ${GITHUB_REPOSITORY} edit --add-label=${LABEL} ${ITEM_NUMBER}

.github/workflows/neon_extra_builds.yml

@@ -3,7 +3,7 @@ name: Check neon with extra platform builds
 on:
   push:
     branches:
-      - main
+    - main
   pull_request:
 
 defaults:
@@ -20,31 +20,10 @@ env:
   COPT: '-Werror'
 
 jobs:
-  check-permissions:
-    if: ${{ !contains(github.event.pull_request.labels.*.name, 'run-no-ci') }}
-    uses: ./.github/workflows/check-permissions.yml
-    with:
-      github-event-name: ${{ github.event_name}}
-
-  check-build-tools-image:
-    needs: [ check-permissions ]
-    uses: ./.github/workflows/check-build-tools-image.yml
-
-  build-build-tools-image:
-    needs: [ check-build-tools-image ]
-    uses: ./.github/workflows/build-build-tools-image.yml
-    with:
-      image-tag: ${{ needs.check-build-tools-image.outputs.image-tag }}
-    secrets: inherit
-
   check-macos-build:
-    needs: [ check-permissions ]
-    if: |
-      contains(github.event.pull_request.labels.*.name, 'run-extra-build-macos')  ||
-      contains(github.event.pull_request.labels.*.name, 'run-extra-build-*') ||
-      github.ref_name == 'main'
+    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-extra-build-macos')
     timeout-minutes: 90
-    runs-on: macos-14
+    runs-on: macos-latest
 
     env:
       # Use release build only, to have less debug info around
@@ -53,12 +32,13 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           submodules: true
+          fetch-depth: 1
 
       - name: Install macOS postgres dependencies
-        run: brew install flex bison openssl protobuf icu4c pkg-config
+        run: brew install flex bison openssl protobuf
 
       - name: Set pg 14 revision for caching
         id: pg_v14_rev
@@ -68,41 +48,19 @@ jobs:
         id: pg_v15_rev
         run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v15) >> $GITHUB_OUTPUT
 
-      - name: Set pg 16 revision for caching
-        id: pg_v16_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v16) >> $GITHUB_OUTPUT
-
-      - name: Set pg 17 revision for caching
-        id: pg_v17_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v17) >> $GITHUB_OUTPUT
-
       - name: Cache postgres v14 build
         id: cache_pg_14
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: pg_install/v14
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
+          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
 
       - name: Cache postgres v15 build
         id: cache_pg_15
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: pg_install/v15
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Cache postgres v16 build
-        id: cache_pg_16
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v16
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v16_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Cache postgres v17 build
-        id: cache_pg_17
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v17
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v17_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
+          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
 
       - name: Set extra env for macOS
         run: |
@@ -110,78 +68,60 @@ jobs:
           echo 'CPPFLAGS=-I/usr/local/opt/openssl@3/include' >> $GITHUB_ENV
 
       - name: Cache cargo deps
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: |
             ~/.cargo/registry
             !~/.cargo/registry/src
             ~/.cargo/git
             target
-          key: v1-${{ runner.os }}-${{ runner.arch }}-cargo-${{ hashFiles('./Cargo.lock') }}-${{ hashFiles('./rust-toolchain.toml') }}-rust
+          key: v1-${{ runner.os }}-cargo-${{ hashFiles('./Cargo.lock') }}-${{ hashFiles('./rust-toolchain.toml') }}-rust
 
       - name: Build postgres v14
         if: steps.cache_pg_14.outputs.cache-hit != 'true'
-        run: make postgres-v14 -j$(sysctl -n hw.ncpu)
+        run: make postgres-v14 -j$(nproc)
 
       - name: Build postgres v15
         if: steps.cache_pg_15.outputs.cache-hit != 'true'
-        run: make postgres-v15 -j$(sysctl -n hw.ncpu)
-
-      - name: Build postgres v16
-        if: steps.cache_pg_16.outputs.cache-hit != 'true'
-        run: make postgres-v16 -j$(sysctl -n hw.ncpu)
-
-      - name: Build postgres v17
-        if: steps.cache_pg_17.outputs.cache-hit != 'true'
-        run: make postgres-v17 -j$(sysctl -n hw.ncpu)
+        run: make postgres-v15 -j$(nproc)
 
       - name: Build neon extensions
-        run: make neon-pg-ext -j$(sysctl -n hw.ncpu)
-
-      - name: Build walproposer-lib
-        run: make walproposer-lib -j$(sysctl -n hw.ncpu)
+        run: make neon-pg-ext -j$(nproc)
 
       - name: Run cargo build
-        run: PQ_LIB_DIR=$(pwd)/pg_install/v16/lib cargo build --all --release
+        run: cargo build --all --release
 
       - name: Check that no warnings are produced
         run: ./run_clippy.sh
 
   gather-rust-build-stats:
-    needs: [ check-permissions, build-build-tools-image ]
-    if: |
-      contains(github.event.pull_request.labels.*.name, 'run-extra-build-stats') ||
-      contains(github.event.pull_request.labels.*.name, 'run-extra-build-*') ||
-      github.ref_name == 'main'
-    runs-on: [ self-hosted, large ]
+    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-extra-build-stats')
+    runs-on: [ self-hosted, gen3, large ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     env:
       BUILD_TYPE: release
+      # remove the cachepot wrapper and build without crate caches
+      RUSTC_WRAPPER: ""
       # build with incremental compilation produce partial results
       # so do not attempt to cache this build, also disable the incremental compilation
       CARGO_INCREMENTAL: 0
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           submodules: true
+          fetch-depth: 1
 
       # Some of our rust modules use FFI and need those to be checked
       - name: Get postgres headers
         run: make postgres-headers -j$(nproc)
 
-      - name: Build walproposer-lib
-        run: make walproposer-lib -j$(nproc)
-
       - name: Produce the build stats
-        run: PQ_LIB_DIR=$(pwd)/pg_install/v17/lib cargo build --all --release --timings -j$(nproc)
+        run: cargo build --all --release --timings
 
       - name: Upload the build stats
         id: upload-stats
@@ -196,7 +136,7 @@ jobs:
           echo "report-url=${REPORT_URL}" >> $GITHUB_OUTPUT
 
       - name: Publish build stats report
-        uses: actions/github-script@v7
+        uses: actions/github-script@v6
         env:
           REPORT_URL: ${{ steps.upload-stats.outputs.report-url }}
           SHA: ${{ github.event.pull_request.head.sha || github.sha }}

.github/workflows/periodic_pagebench.yml

@@ -1,155 +0,0 @@
-name: Periodic pagebench performance test on dedicated EC2 machine in eu-central-1 region
-
-on:
-  schedule:
-    # * is a special character in YAML so you have to quote this string
-    #          ┌───────────── minute (0 - 59)
-    #          │ ┌───────────── hour (0 - 23)
-    #          │ │ ┌───────────── day of the month (1 - 31)
-    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
-    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
-    - cron:  '0 18 * * *' # Runs at 6 PM UTC every day
-  workflow_dispatch: # Allows manual triggering of the workflow
-    inputs:
-      commit_hash:
-        type: string
-        description: 'The long neon repo commit hash for the system under test (pageserver) to be tested.'
-        required: false
-        default: ''
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-concurrency:
-  group: ${{ github.workflow }}
-  cancel-in-progress: false
-
-jobs:
-  trigger_bench_on_ec2_machine_in_eu_central_1:
-    runs-on: [ self-hosted, small ]
-    container:
-      image: neondatabase/build-tools:pinned
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      options: --init
-    timeout-minutes: 360  # Set the timeout to 6 hours
-    env:
-      API_KEY: ${{ secrets.PERIODIC_PAGEBENCH_EC2_RUNNER_API_KEY }}
-      RUN_ID: ${{ github.run_id }}
-      AWS_ACCESS_KEY_ID: ${{ secrets.AWS_EC2_US_TEST_RUNNER_ACCESS_KEY_ID }}
-      AWS_SECRET_ACCESS_KEY : ${{ secrets.AWS_EC2_US_TEST_RUNNER_ACCESS_KEY_SECRET }}
-      AWS_DEFAULT_REGION : "eu-central-1"
-      AWS_INSTANCE_ID : "i-02a59a3bf86bc7e74"
-    steps:
-    # we don't need the neon source code because we run everything remotely
-    # however we still need the local github actions to run the allure step below
-    - uses: actions/checkout@v4
-
-    - name: Show my own (github runner) external IP address - usefull for IP allowlisting
-      run: curl https://ifconfig.me
-
-    - name: Start EC2 instance and wait for the instance to boot up
-      run: |
-        aws ec2 start-instances --instance-ids $AWS_INSTANCE_ID
-        aws ec2 wait instance-running --instance-ids $AWS_INSTANCE_ID
-        sleep 60 # sleep some time to allow cloudinit and our API server to start up
-
-    - name: Determine public IP of the EC2 instance and set env variable EC2_MACHINE_URL_US
-      run: |
-        public_ip=$(aws ec2 describe-instances --instance-ids $AWS_INSTANCE_ID --query 'Reservations[*].Instances[*].PublicIpAddress' --output text)
-        echo "Public IP of the EC2 instance: $public_ip"
-        echo "EC2_MACHINE_URL_US=https://${public_ip}:8443" >> $GITHUB_ENV
-
-    - name: Determine commit hash
-      env:
-        INPUT_COMMIT_HASH: ${{ github.event.inputs.commit_hash }}
-      run: |
-        if [ -z "$INPUT_COMMIT_HASH" ]; then
-          echo "COMMIT_HASH=$(curl -s https://api.github.com/repos/neondatabase/neon/commits/main | jq -r '.sha')" >> $GITHUB_ENV
-        else
-          echo "COMMIT_HASH=$INPUT_COMMIT_HASH" >> $GITHUB_ENV
-        fi
-
-    - name: Start Bench with run_id   
-      run: |
-        curl -k -X 'POST' \
-        "${EC2_MACHINE_URL_US}/start_test/${GITHUB_RUN_ID}" \
-        -H 'accept: application/json' \
-        -H 'Content-Type: application/json' \
-        -H "Authorization: Bearer $API_KEY" \
-        -d "{\"neonRepoCommitHash\": \"${COMMIT_HASH}\"}"
-
-    - name: Poll Test Status
-      id: poll_step
-      run: |
-        status=""
-        while [[ "$status" != "failure" && "$status" != "success" ]]; do
-          response=$(curl -k -X 'GET' \
-          "${EC2_MACHINE_URL_US}/test_status/${GITHUB_RUN_ID}" \
-          -H 'accept: application/json' \
-          -H "Authorization: Bearer $API_KEY")
-          echo "Response: $response"
-          set +x
-          status=$(echo $response | jq -r '.status')
-          echo "Test status: $status"
-          if [[ "$status" == "failure" ]]; then
-            echo "Test failed"
-            exit 1 # Fail the job step if status is failure
-          elif [[ "$status" == "success" || "$status" == "null" ]]; then
-            break
-          elif [[ "$status" == "too_many_runs" ]]; then
-            echo "Too many runs already running"
-            echo "too_many_runs=true" >> "$GITHUB_OUTPUT"
-            exit 1
-          fi
-
-          sleep 60 # Poll every 60 seconds
-        done
-
-    - name: Retrieve Test Logs
-      if: always() && steps.poll_step.outputs.too_many_runs != 'true'
-      run: |
-        curl -k -X 'GET' \
-        "${EC2_MACHINE_URL_US}/test_log/${GITHUB_RUN_ID}" \
-        -H 'accept: application/gzip' \
-        -H "Authorization: Bearer $API_KEY" \
-        --output "test_log_${GITHUB_RUN_ID}.gz"
-    
-    - name: Unzip Test Log and Print it into this job's log
-      if: always() && steps.poll_step.outputs.too_many_runs != 'true'
-      run: |
-        gzip -d "test_log_${GITHUB_RUN_ID}.gz"
-        cat "test_log_${GITHUB_RUN_ID}"
-
-    - name: Create Allure report
-      env:
-        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-      if: ${{ !cancelled() }}
-      uses: ./.github/actions/allure-report-generate
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: "Periodic pagebench testing on dedicated hardware: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
-
-    - name: Cleanup Test Resources
-      if: always() 
-      run: |
-        curl -k -X 'POST' \
-        "${EC2_MACHINE_URL_US}/cleanup_test/${GITHUB_RUN_ID}" \
-        -H 'accept: application/json' \
-        -H "Authorization: Bearer $API_KEY" \
-        -d ''
-
-    - name: Stop EC2 instance and wait for the instance to be stopped
-      if: always() && steps.poll_step.outputs.too_many_runs != 'true'
-      run: |
-        aws ec2 stop-instances --instance-ids $AWS_INSTANCE_ID
-        aws ec2 wait instance-stopped --instance-ids $AWS_INSTANCE_ID

.github/workflows/pg-clients.yml

@@ -1,211 +0,0 @@
-name: Test Postgres client libraries
-
-on:
-  schedule:
-    # * is a special character in YAML so you have to quote this string
-    #          ┌───────────── minute (0 - 59)
-    #          │ ┌───────────── hour (0 - 23)
-    #          │ │ ┌───────────── day of the month (1 - 31)
-    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
-    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
-    - cron:  '23 02 * * *' # run once a day, timezone is utc
-  pull_request:
-    paths:
-      - '.github/workflows/pg-clients.yml'
-      - 'test_runner/pg_clients/**'
-      - 'test_runner/logical_repl/**'
-      - 'poetry.lock'
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref_name }}
-  cancel-in-progress: ${{ github.event_name == 'pull_request' }}
-
-defaults:
-  run:
-    shell: bash -euxo pipefail {0}
-
-env:
-  DEFAULT_PG_VERSION: 16
-  PLATFORM: neon-captest-new
-  AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-  AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-  AWS_DEFAULT_REGION: eu-central-1
-
-jobs:
-  check-permissions:
-    if: ${{ !contains(github.event.pull_request.labels.*.name, 'run-no-ci') }}
-    uses: ./.github/workflows/check-permissions.yml
-    with:
-      github-event-name: ${{ github.event_name }}
-
-  check-build-tools-image:
-    needs: [ check-permissions ]
-    uses: ./.github/workflows/check-build-tools-image.yml
-
-  build-build-tools-image:
-    needs: [ check-build-tools-image ]
-    uses: ./.github/workflows/build-build-tools-image.yml
-    with:
-      image-tag: ${{ needs.check-build-tools-image.outputs.image-tag }}
-    secrets: inherit
-
-  test-logical-replication:
-    needs: [ build-build-tools-image ]
-    runs-on: ubuntu-22.04
-
-    container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      options: --init --user root
-    services:
-      clickhouse:
-        image: clickhouse/clickhouse-server:24.6.3.64
-        ports:
-          - 9000:9000
-          - 8123:8123
-      zookeeper:
-        image: quay.io/debezium/zookeeper:2.7
-        ports:
-          - 2181:2181
-      kafka:
-        image: quay.io/debezium/kafka:2.7
-        env:
-          ZOOKEEPER_CONNECT: "zookeeper:2181"
-          KAFKA_ADVERTISED_LISTENERS: PLAINTEXT://kafka:9092
-          KAFKA_BROKER_ID: 1
-          KAFKA_OFFSETS_TOPIC_REPLICATION_FACTOR: 1
-          KAFKA_JMX_PORT: 9991
-        ports:
-          - 9092:9092
-      debezium:
-        image: quay.io/debezium/connect:2.7
-        env:
-          BOOTSTRAP_SERVERS: kafka:9092
-          GROUP_ID: 1
-          CONFIG_STORAGE_TOPIC: debezium-config
-          OFFSET_STORAGE_TOPIC: debezium-offset
-          STATUS_STORAGE_TOPIC: debezium-status
-          DEBEZIUM_CONFIG_CONNECTOR_CLASS: io.debezium.connector.postgresql.PostgresConnector
-        ports:
-          - 8083:8083
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Download Neon artifact
-        uses: ./.github/actions/download
-        with:
-          name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
-          path: /tmp/neon/
-          prefix: latest
-
-      - name: Create Neon Project
-        id: create-neon-project
-        uses: ./.github/actions/neon-project-create
-        with:
-          api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-          postgres_version: ${{ env.DEFAULT_PG_VERSION }}
-
-      - name: Run tests
-        uses: ./.github/actions/run-python-test-set
-        with:
-          build_type: remote
-          test_selection: logical_repl
-          run_in_parallel: false
-          extra_params: -m remote_cluster
-          pg_version: ${{ env.DEFAULT_PG_VERSION }}
-        env:
-          BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
-
-      - name: Delete Neon Project
-        if: always()
-        uses: ./.github/actions/neon-project-delete
-        with:
-          project_id: ${{ steps.create-neon-project.outputs.project_id }}
-          api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-
-      - name: Create Allure report
-        if: ${{ !cancelled() }}
-        id: create-allure-report
-        uses: ./.github/actions/allure-report-generate
-        with:
-          store-test-results-into-db: true
-        env:
-          REGRESS_TEST_RESULT_CONNSTR_NEW: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}
-
-      - name: Post to a Slack channel
-        if: github.event.schedule && failure()
-        uses: slackapi/slack-github-action@v1
-        with:
-          channel-id: "C06KHQVQ7U3" # on-call-qa-staging-stream
-          slack-message: |
-            Testing the logical replication: <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|${{ job.status }}> (<${{ steps.create-allure-report.outputs.report-url }}|test report>)
-        env:
-          SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
-
-  test-postgres-client-libs:
-    needs: [ build-build-tools-image ]
-    runs-on: ubuntu-22.04
-
-    container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      options: --init --user root
-
-    steps:
-    - uses: actions/checkout@v4
-
-    - name: Download Neon artifact
-      uses: ./.github/actions/download
-      with:
-        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
-        path: /tmp/neon/
-        prefix: latest
-
-    - name: Create Neon Project
-      id: create-neon-project
-      uses: ./.github/actions/neon-project-create
-      with:
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
-
-    - name: Run tests
-      uses: ./.github/actions/run-python-test-set
-      with:
-        build_type: remote
-        test_selection: pg_clients
-        run_in_parallel: false
-        extra_params: -m remote_cluster
-        pg_version: ${{ env.DEFAULT_PG_VERSION }}
-      env:
-        BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
-
-    - name: Delete Neon Project
-      if: always()
-      uses: ./.github/actions/neon-project-delete
-      with:
-        project_id: ${{ steps.create-neon-project.outputs.project_id }}
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-
-    - name: Create Allure report
-      if: ${{ !cancelled() }}
-      id: create-allure-report
-      uses: ./.github/actions/allure-report-generate
-      with:
-        store-test-results-into-db: true
-      env:
-        REGRESS_TEST_RESULT_CONNSTR_NEW: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}
-
-    - name: Post to a Slack channel
-      if: github.event.schedule && failure()
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C06KHQVQ7U3" # on-call-qa-staging-stream
-        slack-message: |
-          Testing Postgres clients: <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|${{ job.status }}> (<${{ steps.create-allure-report.outputs.report-url }}|test report>)
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}

.github/workflows/pg_clients.yml

@@ -0,0 +1,99 @@
+name: Test Postgres client libraries
+
+on:
+  schedule:
+    # * is a special character in YAML so you have to quote this string
+    #          ┌───────────── minute (0 - 59)
+    #          │ ┌───────────── hour (0 - 23)
+    #          │ │ ┌───────────── day of the month (1 - 31)
+    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
+    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
+    - cron:  '23 02 * * *' # run once a day, timezone is utc
+
+  workflow_dispatch:
+
+concurrency:
+  # Allow only one workflow per any non-`main` branch.
+  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
+  cancel-in-progress: true
+
+jobs:
+  test-postgres-client-libs:
+    # TODO: switch to gen2 runner, requires docker
+    runs-on: [ ubuntu-latest ]
+
+    env:
+      DEFAULT_PG_VERSION: 14
+      TEST_OUTPUT: /tmp/test_output
+
+    steps:
+    - name: Checkout
+      uses: actions/checkout@v3
+
+    - uses: actions/setup-python@v4
+      with:
+        python-version: 3.9
+
+    - name: Install Poetry
+      uses: snok/install-poetry@v1
+
+    - name: Cache poetry deps
+      id: cache_poetry
+      uses: actions/cache@v3
+      with:
+        path: ~/.cache/pypoetry/virtualenvs
+        key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
+
+    - name: Install Python deps
+      shell: bash -euxo pipefail {0}
+      run: ./scripts/pysync
+
+    - name: Create Neon Project
+      id: create-neon-project
+      uses: ./.github/actions/neon-project-create
+      with:
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
+
+    - name: Run pytest
+      env:
+        REMOTE_ENV: 1
+        BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
+        POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
+      shell: bash -euxo pipefail {0}
+      run: |
+        # Test framework expects we have psql binary;
+        # but since we don't really need it in this test, let's mock it
+        mkdir -p "$POSTGRES_DISTRIB_DIR/v${DEFAULT_PG_VERSION}/bin" && touch "$POSTGRES_DISTRIB_DIR/v${DEFAULT_PG_VERSION}/bin/psql";
+        ./scripts/pytest \
+          --junitxml=$TEST_OUTPUT/junit.xml \
+          --tb=short \
+          --verbose \
+          -m "remote_cluster" \
+          -rA "test_runner/pg_clients"
+
+    - name: Delete Neon Project
+      if: ${{ always() }}
+      uses: ./.github/actions/neon-project-delete
+      with:
+        project_id: ${{ steps.create-neon-project.outputs.project_id }}
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+
+    # We use GitHub's action upload-artifact because `ubuntu-latest` doesn't have configured AWS CLI.
+    # It will be fixed after switching to gen2 runner
+    - name: Upload python test logs
+      if: always()
+      uses: actions/upload-artifact@v3
+      with:
+        retention-days: 7
+        name: python-test-pg_clients-${{ runner.os }}-stage-logs
+        path: ${{ env.TEST_OUTPUT }}
+
+    - name: Post to a Slack channel
+      if: ${{ github.event.schedule && failure() }}
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C033QLM5P7D" # dev-staging-stream
+        slack-message: "Testing Postgres clients: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}

.github/workflows/pin-build-tools-image.yml

@@ -1,101 +0,0 @@
-name: 'Pin build-tools image'
-
-on:
-  workflow_dispatch:
-    inputs:
-      from-tag:
-        description: 'Source tag'
-        required: true
-        type: string
-      force:
-        description: 'Force the image to be pinned'
-        default: false
-        type: boolean
-  workflow_call:
-    inputs:
-      from-tag:
-        description: 'Source tag'
-        required: true
-        type: string
-      force:
-        description: 'Force the image to be pinned'
-        default: false
-        type: boolean
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-concurrency:
-  group: pin-build-tools-image-${{ inputs.from-tag }}
-  cancel-in-progress: false
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-env:
-  FROM_TAG: ${{ inputs.from-tag }}
-  TO_TAG: pinned
-
-jobs:
-  check-manifests:
-    runs-on: ubuntu-22.04
-    outputs:
-      skip: ${{ steps.check-manifests.outputs.skip }}
-
-    steps:
-      - name: Check if we really need to pin the image
-        id: check-manifests
-        run: |
-          docker manifest inspect neondatabase/build-tools:${FROM_TAG} > ${FROM_TAG}.json
-          docker manifest inspect neondatabase/build-tools:${TO_TAG}   > ${TO_TAG}.json
-
-          if diff ${FROM_TAG}.json ${TO_TAG}.json; then
-            skip=true
-          else
-            skip=false
-          fi
-
-          echo "skip=${skip}" | tee -a $GITHUB_OUTPUT
-
-  tag-image:
-    needs: check-manifests
-
-    # use format(..) to catch both inputs.force = true AND inputs.force = 'true'
-    if: needs.check-manifests.outputs.skip == 'false' || format('{0}', inputs.force) == 'true'
-
-    runs-on: ubuntu-22.04
-
-    permissions:
-      id-token: write # for `azure/login`
-
-    steps:
-      - uses: docker/login-action@v3
-
-        with:
-          username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-          password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-
-      - uses: docker/login-action@v3
-        with:
-          registry: 369495373322.dkr.ecr.eu-central-1.amazonaws.com
-          username: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-          password: ${{ secrets.AWS_SECRET_KEY_DEV }}
-
-      - name: Azure login
-        uses: azure/login@6c251865b4e6290e7b78be643ea2d005bc51f69a  # @v2.1.1
-        with:
-          client-id: ${{ secrets.AZURE_DEV_CLIENT_ID }}
-          tenant-id: ${{ secrets.AZURE_TENANT_ID }}
-          subscription-id: ${{ secrets.AZURE_DEV_SUBSCRIPTION_ID }}
-
-      - name: Login to ACR
-        run: |
-          az acr login --name=neoneastus2
-
-      - name: Tag build-tools with `${{ env.TO_TAG }}` in Docker Hub, ECR, and ACR
-        run: |
-          docker buildx imagetools create -t 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:${TO_TAG} \
-                                          -t neoneastus2.azurecr.io/neondatabase/build-tools:${TO_TAG} \
-                                          -t neondatabase/build-tools:${TO_TAG} \
-                                             neondatabase/build-tools:${FROM_TAG}

.github/workflows/release-notify.yml

@@ -1,29 +0,0 @@
-name: Notify Slack channel about upcoming release
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.number }}
-  cancel-in-progress: true
-
-on:
-  pull_request:
-    branches:
-      - release
-    types:
-      # Default types that triggers a workflow:
-      # - https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request
-      - opened
-      - synchronize
-      - reopened
-      # Additional types that we want to handle:
-      - closed
-
-jobs:
-  notify:
-    runs-on: ubuntu-22.04
-
-    steps:
-      - uses: neondatabase/dev-actions/release-pr-notify@main
-        with:
-          slack-token: ${{ secrets.SLACK_BOT_TOKEN }}
-          slack-channel-id: ${{ vars.SLACK_UPCOMING_RELEASE_CHANNEL_ID || 'C05QQ9J1BRC' }} # if not set, then `#test-release-notifications`
-          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -2,106 +2,32 @@ name: Create Release Branch
 
 on:
   schedule:
-    # It should be kept in sync with if-condition in jobs
-    - cron: '0 6 * * MON' # Storage release
-    - cron: '0 6 * * THU' # Proxy release
-  workflow_dispatch:
-    inputs:
-      create-storage-release-branch:
-        type: boolean
-        description: 'Create Storage release PR'
-        required: false
-      create-proxy-release-branch:
-        type: boolean
-        description: 'Create Proxy release PR'
-        required: false
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
+    - cron: '0 10 * * 2'
 
 jobs:
-  create-storage-release-branch:
-    if: ${{ github.event.schedule == '0 6 * * MON' || format('{0}', inputs.create-storage-release-branch) == 'true' }}
-    runs-on: ubuntu-22.04
-
-    permissions:
-      contents: write # for `git push`
+  create_release_branch:
+    runs-on: [ubuntu-latest]
 
     steps:
     - name: Check out code
-      uses: actions/checkout@v4
+      uses: actions/checkout@v3
       with:
         ref: main
 
-    - name: Set environment variables
-      run: |
-        echo "RELEASE_DATE=$(date +'%Y-%m-%d')" | tee -a $GITHUB_ENV
-        echo "RELEASE_BRANCH=rc/$(date +'%Y-%m-%d')" | tee -a $GITHUB_ENV
+    - name: Get current date
+      id: date
+      run: echo "date=$(date +'%Y-%m-%d')" >> $GITHUB_OUTPUT
 
     - name: Create release branch
-      run: git checkout -b $RELEASE_BRANCH
+      run: git checkout -b releases/${{ steps.date.outputs.date }}
 
     - name: Push new branch
-      run: git push origin $RELEASE_BRANCH
+      run: git push origin releases/${{ steps.date.outputs.date }}
 
     - name: Create pull request into release
-      env:
-        GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-      run: |
-        TITLE="Storage & Compute release ${RELEASE_DATE}"
-
-        cat << EOF > body.md
-          ## ${TITLE}
-
-          **Please merge this Pull Request using 'Create a merge commit' button**
-        EOF
-
-        gh pr create --title "${TITLE}" \
-                     --body-file "body.md" \
-                     --head "${RELEASE_BRANCH}" \
-                     --base "release"
-
-  create-proxy-release-branch:
-    if: ${{ github.event.schedule == '0 6 * * THU' || format('{0}', inputs.create-proxy-release-branch) == 'true' }}
-    runs-on: ubuntu-22.04
-
-    permissions:
-      contents: write # for `git push`
-
-    steps:
-    - name: Check out code
-      uses: actions/checkout@v4
+      uses: thomaseizinger/create-pull-request@e3972219c86a56550fb70708d96800d8e24ba862 # 1.3.0
       with:
-        ref: main
-
-    - name: Set environment variables
-      run: |
-        echo "RELEASE_DATE=$(date +'%Y-%m-%d')" | tee -a $GITHUB_ENV
-        echo "RELEASE_BRANCH=rc/proxy/$(date +'%Y-%m-%d')" | tee -a $GITHUB_ENV
-
-    - name: Create release branch
-      run: git checkout -b $RELEASE_BRANCH
-
-    - name: Push new branch
-      run: git push origin $RELEASE_BRANCH
-
-    - name: Create pull request into release
-      env:
-        GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-      run: |
-        TITLE="Proxy release ${RELEASE_DATE}"
-
-        cat << EOF > body.md
-          ## ${TITLE}
-
-          **Please merge this Pull Request using 'Create a merge commit' button**
-        EOF
-
-        gh pr create --title "${TITLE}" \
-                     --body-file "body.md" \
-                     --head "${RELEASE_BRANCH}" \
-                     --base "release-proxy"
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        head: releases/${{ steps.date.outputs.date }}
+        base: release
+        title: Release ${{ steps.date.outputs.date }}

.github/workflows/trigger-e2e-tests.yml

@@ -1,147 +0,0 @@
-name: Trigger E2E Tests
-
-on:
-  pull_request:
-    types:
-      - ready_for_review
-  workflow_call:
-
-defaults:
-  run:
-    shell: bash -euxo pipefail {0}
-
-env:
-  # A concurrency group that we use for e2e-tests runs, matches `concurrency.group` above with `github.repository` as a prefix
-  E2E_CONCURRENCY_GROUP: ${{ github.repository }}-e2e-tests-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
-
-jobs:
-  cancel-previous-e2e-tests:
-    if: github.event_name == 'pull_request'
-    runs-on: ubuntu-22.04
-
-    steps:
-      - name: Cancel previous e2e-tests runs for this PR
-        env:
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          gh workflow --repo neondatabase/cloud \
-            run cancel-previous-in-concurrency-group.yml \
-              --field concurrency_group="${{ env.E2E_CONCURRENCY_GROUP }}"
-
-  tag:
-    runs-on: ubuntu-22.04
-    outputs:
-      build-tag: ${{ steps.build-tag.outputs.tag }}
-
-    steps:
-      # Need `fetch-depth: 0` to count the number of commits in the branch
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Get build tag
-        env:
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-          CURRENT_BRANCH: ${{ github.head_ref || github.ref_name }}
-          CURRENT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-        run: |
-          if [[ "$GITHUB_REF_NAME" == "main" ]]; then
-            echo "tag=$(git rev-list --count HEAD)" | tee -a $GITHUB_OUTPUT
-          elif [[ "$GITHUB_REF_NAME" == "release" ]]; then
-            echo "tag=release-$(git rev-list --count HEAD)" | tee -a $GITHUB_OUTPUT
-          elif [[ "$GITHUB_REF_NAME" == "release-proxy" ]]; then
-            echo "tag=release-proxy-$(git rev-list --count HEAD)" >> $GITHUB_OUTPUT
-          else
-            echo "GITHUB_REF_NAME (value '$GITHUB_REF_NAME') is not set to either 'main' or 'release'"
-            BUILD_AND_TEST_RUN_ID=$(gh run list -b $CURRENT_BRANCH -c $CURRENT_SHA -w 'Build and Test' -L 1 --json databaseId --jq '.[].databaseId')
-            echo "tag=$BUILD_AND_TEST_RUN_ID" | tee -a $GITHUB_OUTPUT
-          fi
-        id: build-tag
-
-  trigger-e2e-tests:
-    needs: [ tag ]
-    runs-on: ubuntu-22.04
-    env:
-      EVENT_ACTION: ${{ github.event.action }}
-      GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-      TAG: ${{ needs.tag.outputs.build-tag }}
-    steps:
-      - name: Wait for `promote-images` job to finish
-        # It's important to have a timeout here, the script in the step can run infinitely
-        timeout-minutes: 60
-        run: |
-          if [ "${GITHUB_EVENT_NAME}" != "pull_request" ] || [ "${EVENT_ACTION}" != "ready_for_review" ]; then
-            exit 0
-          fi
-
-          # For PRs we use the run id as the tag
-          BUILD_AND_TEST_RUN_ID=${TAG}
-          while true; do
-            conclusion=$(gh run --repo ${GITHUB_REPOSITORY} view ${BUILD_AND_TEST_RUN_ID} --json jobs --jq '.jobs[] | select(.name == "promote-images") | .conclusion')
-            case "$conclusion" in
-              success)
-                break
-                ;;
-              failure | cancelled | skipped)
-                echo "The 'promote-images' job didn't succeed: '${conclusion}'. Exiting..."
-                exit 1
-                ;;
-              *)
-                echo "The 'promote-images' hasn't succeed yet. Waiting..."
-                sleep 60
-                ;;
-            esac
-          done
-
-      - name: Set e2e-platforms
-        id: e2e-platforms
-        env:
-          PR_NUMBER: ${{ github.event.pull_request.number }}
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: |
-          # Default set of platforms to run e2e tests on
-          platforms='["docker", "k8s"]'
-
-          # If the PR changes vendor/, pgxn/ or libs/vm_monitor/ directories, or Dockerfile.compute-node, add k8s-neonvm to the list of platforms.
-          # If the workflow run is not a pull request, add k8s-neonvm to the list.
-          if [ "$GITHUB_EVENT_NAME" == "pull_request" ]; then
-            for f in $(gh api "/repos/${GITHUB_REPOSITORY}/pulls/${PR_NUMBER}/files" --paginate --jq '.[].filename'); do
-              case "$f" in
-                vendor/*|pgxn/*|libs/vm_monitor/*|Dockerfile.compute-node)
-                  platforms=$(echo "${platforms}" | jq --compact-output '. += ["k8s-neonvm"] | unique')
-                  ;;
-                *)
-                  # no-op
-                  ;;
-              esac
-            done
-          else
-            platforms=$(echo "${platforms}" | jq --compact-output '. += ["k8s-neonvm"] | unique')
-          fi
-
-          echo "e2e-platforms=${platforms}" | tee -a $GITHUB_OUTPUT
-
-      - name: Set PR's status to pending and request a remote CI test
-        env:
-          E2E_PLATFORMS: ${{ steps.e2e-platforms.outputs.e2e-platforms }}
-          COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          REMOTE_REPO="${GITHUB_REPOSITORY_OWNER}/cloud"
-
-          gh api "/repos/${GITHUB_REPOSITORY}/statuses/${COMMIT_SHA}" \
-            --method POST \
-            --raw-field "state=pending" \
-            --raw-field "description=[$REMOTE_REPO] Remote CI job is about to start" \
-            --raw-field "context=neon-cloud-e2e"
-
-          gh workflow --repo ${REMOTE_REPO} \
-            run testing.yml \
-              --ref "main" \
-              --raw-field "ci_job_name=neon-cloud-e2e" \
-              --raw-field "commit_hash=$COMMIT_SHA" \
-              --raw-field "remote_repo=${GITHUB_REPOSITORY}" \
-              --raw-field "storage_image_tag=${TAG}" \
-              --raw-field "compute_image_tag=${TAG}" \
-              --raw-field "concurrency_group=${E2E_CONCURRENCY_GROUP}" \
-              --raw-field "e2e-platforms=${E2E_PLATFORMS}"

.gitignore

@@ -1,15 +1,14 @@
 /pg_install
 /target
+/alek_ext/target
 /tmp_check
 /tmp_check_cli
 __pycache__/
 test_output/
 .vscode
 .idea
-neon.iml
 /.neon
 /integration_tests/.neon
-compaction-suite-results.*
 
 # Coverage
 *.profraw
@@ -20,6 +19,3 @@ compaction-suite-results.*
 *.o
 *.so
 *.Po
-
-# pgindent typedef lists
-*.list

.gitmodules

@@ -6,11 +6,3 @@
 	path = vendor/postgres-v15
 	url = https://github.com/neondatabase/postgres.git
 	branch = REL_15_STABLE_neon
-[submodule "vendor/postgres-v16"]
-	path = vendor/postgres-v16
-	url = https://github.com/neondatabase/postgres.git
-	branch = REL_16_STABLE_neon
-[submodule "vendor/postgres-v17"]
-	path = vendor/postgres-v17
-	url = https://github.com/neondatabase/postgres.git
-	branch = REL_17_STABLE_neon

.neon_clippy_args

@@ -1,5 +1,4 @@
 # * `-A unknown_lints` – do not warn about unknown lint suppressions
 #                        that people with newer toolchains might use
 # * `-D warnings`      - fail on any warnings (`cargo` returns non-zero exit status)
-# * `-D clippy::todo`  - don't let `todo!()` slip into `main`
-export CLIPPY_COMMON_ARGS="--locked --workspace --all-targets -- -A unknown_lints -D warnings -D clippy::todo"
+export CLIPPY_COMMON_ARGS="--locked --workspace --all-targets -- -A unknown_lints -D warnings"

CODEOWNERS

@@ -1,13 +1,11 @@
-/compute_tools/ @neondatabase/control-plane @neondatabase/compute
-/storage_controller @neondatabase/storage
-/libs/pageserver_api/ @neondatabase/storage
-/libs/postgres_ffi/ @neondatabase/compute @neondatabase/storage
-/libs/remote_storage/ @neondatabase/storage
-/libs/safekeeper_api/ @neondatabase/storage
-/libs/vm_monitor/ @neondatabase/autoscaling
-/pageserver/ @neondatabase/storage
+/compute_tools/ @neondatabase/control-plane
+/control_plane/ @neondatabase/compute @neondatabase/storage
+/libs/pageserver_api/ @neondatabase/compute @neondatabase/storage
+/libs/postgres_ffi/ @neondatabase/compute 
+/libs/remote_storage/ @neondatabase/storage 
+/libs/safekeeper_api/ @neondatabase/safekeepers  
+/pageserver/ @neondatabase/compute @neondatabase/storage 
 /pgxn/ @neondatabase/compute
-/pgxn/neon/ @neondatabase/compute @neondatabase/storage
-/proxy/ @neondatabase/proxy
-/safekeeper/ @neondatabase/storage
+/proxy/ @neondatabase/control-plane 
+/safekeeper/ @neondatabase/safekeepers
 /vendor/ @neondatabase/compute

CONTRIBUTING.md

@@ -9,24 +9,6 @@ refactoring, additional comments, and so forth. Let's try to raise the
 bar, and clean things up as we go. Try to leave code in a better shape
 than it was before.
 
-## Pre-commit hook
-
-We have a sample pre-commit hook in `pre-commit.py`.
-To set it up, run:
-
-```bash
-ln -s ../../pre-commit.py .git/hooks/pre-commit
-```
-
-This will run following checks on staged files before each commit:
-- `rustfmt`
-- checks for Python files, see [obligatory checks](/docs/sourcetree.md#obligatory-checks).
-
-There is also a separate script `./run_clippy.sh` that runs `cargo clippy` on the whole project
-and `./scripts/reformat` that runs all formatting tools to ensure the project is up to date.
-
-If you want to skip the hook, run `git commit` with `--no-verify` option.
-
 ## Submitting changes
 
 1. Get at least one +1 on your PR before you push.
@@ -45,40 +27,3 @@ your patch's fault. Help to fix the root cause if something else has
 broken the CI, before pushing.
 
 *Happy Hacking!*
-
-# How to run a CI pipeline on Pull Requests from external contributors
-_An instruction for maintainers_
-
-## TL;DR:
-- Review the PR
-- If and only if it looks **safe** (i.e. it doesn't contain any malicious code which could expose secrets or harm the CI), then:
-    - Press the "Approve and run" button in GitHub UI
-    - Add the `approved-for-ci-run` label to the PR
-    - Currently draft PR will skip e2e test (only for internal contributors). After turning the PR 'Ready to Review' CI will trigger e2e test
-      - Add `run-e2e-tests-in-draft` label to run e2e test in draft PR (override above behaviour)
-      - The `approved-for-ci-run` workflow will add `run-e2e-tests-in-draft` automatically to run e2e test for external contributors
-
-Repeat all steps after any change to the PR.
-- When the changes are ready to get merged — merge the original PR (not the internal one)
-
-## Longer version:
-
-GitHub Actions triggered by the `pull_request` event don't share repository secrets with the forks (for security reasons).
-So, passing the CI pipeline on Pull Requests from external contributors is impossible.
-
-We're using the following approach to make it work:
-- After the review, assign the `approved-for-ci-run` label to the PR if changes look safe
-- A GitHub Action will create an internal branch and a new PR with the same changes (for example, for a PR `#1234`, it'll be a branch `ci-run/pr-1234`)
-- Because the PR is created from the internal branch, it is able to access repository secrets (that's why it's crucial to make sure that the PR doesn't contain any malicious code that could expose our secrets or intentionally harm the CI)
-- The label gets removed automatically, so to run CI again with new changes, the label should be added again (after the review)
-
-For details see [`approved-for-ci-run.yml`](.github/workflows/approved-for-ci-run.yml)
-
-## How do I make build-tools image "pinned"
-
-It's possible to update the `pinned` tag of the `build-tools` image using the `pin-build-tools-image.yml` workflow.
-
-```bash
-gh workflow -R neondatabase/neon run pin-build-tools-image.yml \
-            -f from-tag=cc98d9b00d670f182c507ae3783342bd7e64c31e
-```

Cargo.toml

@@ -1,26 +1,19 @@
 [workspace]
-resolver = "2"
 members = [
+    "alek_ext",
     "compute_tools",
     "control_plane",
-    "control_plane/storcon_cli",
     "pageserver",
-    "pageserver/compaction",
     "pageserver/ctl",
-    "pageserver/client",
-    "pageserver/pagebench",
     "proxy",
     "safekeeper",
     "storage_broker",
-    "storage_controller",
-    "storage_controller/client",
-    "storage_scrubber",
     "workspace_hack",
+    "trace",
     "libs/compute_api",
     "libs/pageserver_api",
     "libs/postgres_ffi",
     "libs/safekeeper_api",
-    "libs/desim",
     "libs/utils",
     "libs/consumption_metrics",
     "libs/postgres_backend",
@@ -31,8 +24,6 @@ members = [
     "libs/remote_storage",
     "libs/tracing-utils",
     "libs/postgres_ffi/wal_craft",
-    "libs/vm_monitor",
-    "libs/walproposer",
 ]
 
 [workspace.package]
@@ -41,218 +32,161 @@ license = "Apache-2.0"
 
 ## All dependency versions, used in the project
 [workspace.dependencies]
-ahash = "0.8"
 anyhow = { version = "1.0", features = ["backtrace"] }
-arc-swap = "1.6"
-async-compression = { version = "0.4.0", features = ["tokio", "gzip", "zstd"] }
-atomic-take = "1.1.0"
-azure_core = { version = "0.19", default-features = false, features = ["enable_reqwest_rustls", "hmac_rust"] }
-azure_identity = { version = "0.19", default-features = false, features = ["enable_reqwest_rustls"] }
-azure_storage = { version = "0.19", default-features = false, features = ["enable_reqwest_rustls"] }
-azure_storage_blobs = { version = "0.19", default-features = false, features = ["enable_reqwest_rustls"] }
-flate2 = "1.0.26"
 async-stream = "0.3"
 async-trait = "0.1"
-aws-config = { version = "1.3", default-features = false, features=["rustls"] }
-aws-sdk-s3 = "1.26"
-aws-sdk-iam = "1.15.0"
-aws-smithy-async = { version = "1.2.1", default-features = false, features=["rt-tokio"] }
-aws-smithy-types = "1.1.9"
-aws-credential-types = "1.2.0"
-aws-sigv4 = { version = "1.2.1", features = ["sign-http"] }
-aws-types = "1.2.0"
-axum = { version = "0.6.20", features = ["ws"] }
+atty = "0.2.14"
+aws-config = { version = "0.55", default-features = false, features=["rustls"] }
+aws-sdk-s3 = "0.27"
+aws-smithy-http = "0.55"
+aws-credential-types = "0.55"
+aws-types = "0.55"
 base64 = "0.13.0"
 bincode = "1.3"
-bindgen = "0.70"
-bit_field = "0.10.2"
+bindgen = "0.65"
 bstr = "1.0"
 byteorder = "1.4"
 bytes = "1.0"
-camino = "1.1.6"
-cfg-if = "1.0.0"
 chrono = { version = "0.4", default-features = false, features = ["clock"] }
 clap = { version = "4.0", features = ["derive"] }
-comfy-table = "7.1"
+close_fds = "0.3.2"
+comfy-table = "6.1"
 const_format = "0.2"
 crc32c = "0.6"
-crossbeam-deque = "0.8.5"
 crossbeam-utils = "0.8.5"
-dashmap = { version = "5.5.0", features = ["raw-api"] }
 either = "1.8"
 enum-map = "2.4.2"
 enumset = "1.0.12"
 fail = "0.5.0"
-fallible-iterator = "0.2"
-framed-websockets = { version = "0.1.0", git = "https://github.com/neondatabase/framed-websockets" }
+fs2 = "0.4.3"
 futures = "0.3"
 futures-core = "0.3"
 futures-util = "0.3"
 git-version = "0.3"
-hashbrown = "0.14"
-hashlink = "0.9.1"
-hdrhistogram = "7.5.2"
+hashbrown = "0.13"
+hashlink = "0.8.1"
 hex = "0.4"
 hex-literal = "0.4"
 hmac = "0.12.1"
 hostname = "0.3.1"
-http = {version = "1.1.0", features = ["std"]}
-http-types = { version = "2", default-features = false }
 humantime = "2.1"
 humantime-serde = "1.1.1"
 hyper = "0.14"
-tokio-tungstenite = "0.20.0"
-indexmap = "2"
-indoc = "2"
-inotify = "0.10.2"
-ipnet = "2.9.0"
+hyper-tungstenite = "0.9"
 itertools = "0.10"
-jsonwebtoken = "9"
-lasso = "0.7"
+jsonwebtoken = "8"
 libc = "0.2"
 md5 = "0.7.0"
-measured = { version = "0.0.22", features=["lasso"] }
-measured-process = { version = "0.0.22" }
 memoffset = "0.8"
-nix = { version = "0.27", features = ["dir", "fs", "process", "socket", "signal", "poll"] }
-notify = "6.0.0"
+native-tls = "0.2"
+nix = "0.26"
+notify = "5.0.0"
 num_cpus = "1.15"
 num-traits = "0.2.15"
 once_cell = "1.13"
-opentelemetry = "0.20.0"
-opentelemetry-otlp = { version = "0.13.0", default-features=false, features = ["http-proto", "trace", "http", "reqwest-client"] }
-opentelemetry-semantic-conventions = "0.12.0"
+opentelemetry = "0.18.0"
+opentelemetry-otlp = { version = "0.11.0", default_features=false, features = ["http-proto", "trace", "http", "reqwest-client"] }
+opentelemetry-semantic-conventions = "0.10.0"
 parking_lot = "0.12"
-parquet = { version = "53", default-features = false, features = ["zstd"] }
-parquet_derive = "53"
-pbkdf2 = { version = "0.12.1", features = ["simple", "std"] }
 pin-project-lite = "0.2"
-procfs = "0.16"
-prometheus = {version = "0.13", default-features=false, features = ["process"]} # removes protobuf dependency
+prometheus = {version = "0.13", default_features=false, features = ["process"]} # removes protobuf dependency
 prost = "0.11"
 rand = "0.8"
-redis = { version = "0.25.2", features = ["tokio-rustls-comp", "keep-alive"] }
-regex = "1.10.2"
-reqwest = { version = "0.12", default-features = false, features = ["rustls-tls"] }
-reqwest-tracing = { version = "0.5", features = ["opentelemetry_0_20"] }
-reqwest-middleware = "0.3.0"
-reqwest-retry = "0.5"
+regex = "1.4"
+reqwest = { version = "0.11", default-features = false, features = ["rustls-tls"] }
+reqwest-tracing = { version = "0.4.0", features = ["opentelemetry_0_18"] }
+reqwest-middleware = "0.2.0"
 routerify = "3"
 rpds = "0.13"
-rustc-hash = "1.1.0"
-rustls = "0.22"
-rustls-pemfile = "2"
+rustls = "0.20"
+rustls-pemfile = "1"
 rustls-split = "0.3"
 scopeguard = "1.1"
-sysinfo = "0.29.2"
-sd-notify = "0.4.1"
-send-future = "0.1.0"
-sentry = { version = "0.32", default-features = false, features = ["backtrace", "contexts", "panic", "rustls", "reqwest" ] }
+sentry = { version = "0.30", default-features = false, features = ["backtrace", "contexts", "panic", "rustls", "reqwest" ] }
 serde = { version = "1.0", features = ["derive"] }
 serde_json = "1"
-serde_path_to_error = "0.1"
 serde_with = "2.0"
-serde_assert = "0.5.0"
 sha2 = "0.10.2"
 signal-hook = "0.3"
-smallvec = "1.11"
-smol_str = { version = "0.2.0", features = ["serde"] }
 socket2 = "0.5"
-strum = "0.26"
-strum_macros = "0.26"
-"subtle"  = "2.5.0"
-svg_fmt = "0.4.3"
+strum = "0.24"
+strum_macros = "0.24"
+svg_fmt = "0.4.1"
 sync_wrapper = "0.1.2"
 tar = "0.4"
-task-local-extensions = "0.1.4"
-test-context = "0.3"
+test-context = "0.1"
 thiserror = "1.0"
-tikv-jemallocator = "0.5"
-tikv-jemalloc-ctl = "0.5"
+tls-listener = { version = "0.6", features = ["rustls", "hyper-h1"] }
 tokio = { version = "1.17", features = ["macros"] }
-tokio-epoll-uring = { git = "https://github.com/neondatabase/tokio-epoll-uring.git" , branch = "main" }
 tokio-io-timeout = "1.2.0"
-tokio-postgres-rustls = "0.11.0"
-tokio-rustls = "0.25"
+tokio-postgres-rustls = "0.9.0"
+tokio-rustls = "0.23"
 tokio-stream = "0.1"
-tokio-tar = "0.3"
-tokio-util = { version = "0.7.10", features = ["io", "rt"] }
-toml = "0.8"
-toml_edit = "0.22"
+tokio-util = { version = "0.7", features = ["io"] }
+toml = "0.7"
+toml_edit = "0.19"
 tonic = {version = "0.9", features = ["tls", "tls-roots"]}
-tower-service = "0.3.2"
 tracing = "0.1"
 tracing-error = "0.2.0"
-tracing-opentelemetry = "0.21.0"
-tracing-subscriber = { version = "0.3", default-features = false, features = ["smallvec", "fmt", "tracing-log", "std", "env-filter", "json"] }
-try-lock = "0.2.5"
-twox-hash = { version = "1.6.3", default-features = false }
-typed-json = "0.1"
+tracing-opentelemetry = "0.18.0"
+tracing-subscriber = { version = "0.3", features = ["env-filter"] }
 url = "2.2"
-urlencoding = "2.1"
-uuid = { version = "1.6.1", features = ["v4", "v7", "serde"] }
+uuid = { version = "1.2", features = ["v4", "serde"] }
 walkdir = "2.3.2"
-rustls-native-certs = "0.7"
+webpki-roots = "0.23"
 x509-parser = "0.15"
-whoami = "1.5.1"
 
 ## TODO replace this with tracing
 env_logger = "0.10"
 log = "0.4"
 
 ## Libraries from neondatabase/ git forks, ideally with changes to be upstreamed
+postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="2e9b5f1ddc481d1a98fa79f6b9378ac4f170b7c9" }
+postgres-native-tls = { git = "https://github.com/neondatabase/rust-postgres.git", rev="2e9b5f1ddc481d1a98fa79f6b9378ac4f170b7c9" }
+postgres-protocol = { git = "https://github.com/neondatabase/rust-postgres.git", rev="2e9b5f1ddc481d1a98fa79f6b9378ac4f170b7c9" }
+postgres-types = { git = "https://github.com/neondatabase/rust-postgres.git", rev="2e9b5f1ddc481d1a98fa79f6b9378ac4f170b7c9" }
+tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="2e9b5f1ddc481d1a98fa79f6b9378ac4f170b7c9" }
+tokio-tar = { git = "https://github.com/neondatabase/tokio-tar.git", rev="404df61437de0feef49ba2ccdbdd94eb8ad6e142" }
 
-# We want to use the 'neon' branch for these, but there's currently one
-# incompatible change on the branch. See:
-#
-# - PR #8076 which contained changes that depended on the new changes in
-#   the rust-postgres crate, and
-# - PR #8654 which reverted those changes and made the code in proxy incompatible
-#   with the tip of the 'neon' branch again.
-#
-# When those proxy changes are re-applied (see PR #8747), we can switch using
-# the tip of the 'neon' branch again.
-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev = "20031d7a9ee1addeae6e0968e3899ae6bf01cee2" }
-postgres-protocol = { git = "https://github.com/neondatabase/rust-postgres.git", rev = "20031d7a9ee1addeae6e0968e3899ae6bf01cee2" }
-postgres-types = { git = "https://github.com/neondatabase/rust-postgres.git", rev = "20031d7a9ee1addeae6e0968e3899ae6bf01cee2" }
-tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev = "20031d7a9ee1addeae6e0968e3899ae6bf01cee2" }
+## Other git libraries
+heapless = { default-features=false, features=[], git = "https://github.com/japaric/heapless.git", rev = "644653bf3b831c6bb4963be2de24804acf5e5001" } # upstream release pending
 
 ## Local libraries
 compute_api = { version = "0.1", path = "./libs/compute_api/" }
 consumption_metrics = { version = "0.1", path = "./libs/consumption_metrics/" }
 metrics = { version = "0.1", path = "./libs/metrics/" }
 pageserver_api = { version = "0.1", path = "./libs/pageserver_api/" }
-pageserver_client = { path = "./pageserver/client" }
-pageserver_compaction = { version = "0.1", path = "./pageserver/compaction/" }
 postgres_backend = { version = "0.1", path = "./libs/postgres_backend/" }
 postgres_connection = { version = "0.1", path = "./libs/postgres_connection/" }
 postgres_ffi = { version = "0.1", path = "./libs/postgres_ffi/" }
 pq_proto = { version = "0.1", path = "./libs/pq_proto/" }
 remote_storage = { version = "0.1", path = "./libs/remote_storage/" }
 safekeeper_api = { version = "0.1", path = "./libs/safekeeper_api" }
-desim = { version = "0.1", path = "./libs/desim" }
 storage_broker = { version = "0.1", path = "./storage_broker/" } # Note: main broker code is inside the binary crate, so linking with the library shouldn't be heavy.
-storage_controller_client = { path = "./storage_controller/client" }
 tenant_size_model = { version = "0.1", path = "./libs/tenant_size_model/" }
 tracing-utils = { version = "0.1", path = "./libs/tracing-utils/" }
 utils = { version = "0.1", path = "./libs/utils/" }
-vm_monitor = { version = "0.1", path = "./libs/vm_monitor/" }
-walproposer = { version = "0.1", path = "./libs/walproposer/" }
 
 ## Common library dependency
 workspace_hack = { version = "0.1", path = "./workspace_hack/" }
 
 ## Build dependencies
-criterion = "0.5.1"
-rcgen = "0.12"
-rstest = "0.18"
-camino-tempfile = "1.0.2"
+criterion = "0.4"
+rcgen = "0.10"
+rstest = "0.17"
+tempfile = "3.4"
 tonic-build = "0.9"
 
 [patch.crates-io]
 
-# Needed to get `tokio-postgres-rustls` to depend on our fork.
-tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev = "20031d7a9ee1addeae6e0968e3899ae6bf01cee2" }
+# This is only needed for proxy's tests.
+# TODO: we should probably fork `tokio-postgres-rustls` instead.
+tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="2e9b5f1ddc481d1a98fa79f6b9378ac4f170b7c9" }
+
+# Changes the MAX_THREADS limit from 4096 to 32768.
+# This is a temporary workaround for using tracing from many threads in safekeepers code,
+# until async safekeepers patch is merged to the main.
+sharded-slab = { git = "https://github.com/neondatabase/sharded-slab.git", rev="98d16753ab01c61f0a028de44167307a00efea00" }
 
 ################# Binary contents sections
 

Dockerfile

@@ -3,10 +3,8 @@
 ### By default, the binaries inside the image have some mock parameters and can start, but are not intended to be used
 ### inside this image in the real deployments.
 ARG REPOSITORY=neondatabase
-ARG IMAGE=build-tools
+ARG IMAGE=rust
 ARG TAG=pinned
-ARG DEFAULT_PG_VERSION=17
-ARG STABLE_PG_VERSION=16
 
 # Build Postgres
 FROM $REPOSITORY/$IMAGE:$TAG AS pg-build
@@ -14,13 +12,11 @@ WORKDIR /home/nonroot
 
 COPY --chown=nonroot vendor/postgres-v14 vendor/postgres-v14
 COPY --chown=nonroot vendor/postgres-v15 vendor/postgres-v15
-COPY --chown=nonroot vendor/postgres-v16 vendor/postgres-v16
-COPY --chown=nonroot vendor/postgres-v17 vendor/postgres-v17
 COPY --chown=nonroot pgxn pgxn
 COPY --chown=nonroot Makefile Makefile
 COPY --chown=nonroot scripts/ninstall.sh scripts/ninstall.sh
 
-ENV BUILD_TYPE=release
+ENV BUILD_TYPE release
 RUN set -e \
     && mold -run make -j $(nproc) -s neon-pg-ext \
     && rm -rf pg_install/build \
@@ -30,35 +26,37 @@ RUN set -e \
 FROM $REPOSITORY/$IMAGE:$TAG AS build
 WORKDIR /home/nonroot
 ARG GIT_VERSION=local
-ARG BUILD_TAG
-ARG STABLE_PG_VERSION
+
+# Enable https://github.com/paritytech/cachepot to cache Rust crates' compilation results in Docker builds.
+# Set up cachepot to use an AWS S3 bucket for cache results, to reuse it between `docker build` invocations.
+# cachepot falls back to local filesystem if S3 is misconfigured, not failing the build
+ARG RUSTC_WRAPPER=cachepot
+ENV AWS_REGION=eu-central-1
+ENV CACHEPOT_S3_KEY_PREFIX=cachepot
+ARG CACHEPOT_BUCKET=neon-github-dev
+#ARG AWS_ACCESS_KEY_ID
+#ARG AWS_SECRET_ACCESS_KEY
 
 COPY --from=pg-build /home/nonroot/pg_install/v14/include/postgresql/server pg_install/v14/include/postgresql/server
 COPY --from=pg-build /home/nonroot/pg_install/v15/include/postgresql/server pg_install/v15/include/postgresql/server
-COPY --from=pg-build /home/nonroot/pg_install/v16/include/postgresql/server pg_install/v16/include/postgresql/server
-COPY --from=pg-build /home/nonroot/pg_install/v17/include/postgresql/server pg_install/v17/include/postgresql/server
-COPY --from=pg-build /home/nonroot/pg_install/v16/lib                       pg_install/v16/lib
-COPY --from=pg-build /home/nonroot/pg_install/v17/lib                       pg_install/v17/lib
 COPY --chown=nonroot . .
 
-ARG ADDITIONAL_RUSTFLAGS
+# Show build caching stats to check if it was used in the end.
+# Has to be the part of the same RUN since cachepot daemon is killed in the end of this RUN, losing the compilation stats.
 RUN set -e \
-    && PQ_LIB_DIR=$(pwd)/pg_install/v${STABLE_PG_VERSION}/lib RUSTFLAGS="-Clinker=clang -Clink-arg=-fuse-ld=mold -Clink-arg=-Wl,--no-rosegment ${ADDITIONAL_RUSTFLAGS}" cargo build \
+    && mold -run cargo build  \
       --bin pg_sni_router  \
       --bin pageserver  \
       --bin pagectl  \
       --bin safekeeper  \
       --bin storage_broker  \
-      --bin storage_controller  \
       --bin proxy  \
-      --bin neon_local \
-      --bin storage_scrubber \
-      --locked --release
+      --locked --release \
+    && cachepot -s
 
 # Build final image
 #
 FROM debian:bullseye-slim
-ARG DEFAULT_PG_VERSION
 WORKDIR /data
 
 RUN set -e \
@@ -66,6 +64,7 @@ RUN set -e \
     && apt install -y \
         libreadline-dev \
         libseccomp-dev \
+        openssl \
         ca-certificates \
     && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* \
     && useradd -d /data neon \
@@ -75,39 +74,24 @@ COPY --from=build --chown=neon:neon /home/nonroot/target/release/pg_sni_router
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/pageserver          /usr/local/bin
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/pagectl             /usr/local/bin
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/safekeeper          /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_broker      /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_controller  /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_broker         /usr/local/bin
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/proxy               /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/neon_local          /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_scrubber    /usr/local/bin
 
 COPY --from=pg-build /home/nonroot/pg_install/v14 /usr/local/v14/
 COPY --from=pg-build /home/nonroot/pg_install/v15 /usr/local/v15/
-COPY --from=pg-build /home/nonroot/pg_install/v16 /usr/local/v16/
-COPY --from=pg-build /home/nonroot/pg_install/v17 /usr/local/v17/
 COPY --from=pg-build /home/nonroot/postgres_install.tar.gz /data/
 
 # By default, pageserver uses `.neon/` working directory in WORKDIR, so create one and fill it with the dummy config.
 # Now, when `docker run ... pageserver` is run, it can start without errors, yet will have some default dummy values.
-RUN mkdir -p /data/.neon/ && \
-  echo "id=1234" > "/data/.neon/identity.toml" && \
-  echo "broker_endpoint='http://storage_broker:50051'\n" \
-       "pg_distrib_dir='/usr/local/'\n" \
-       "listen_pg_addr='0.0.0.0:6400'\n" \
-       "listen_http_addr='0.0.0.0:9898'\n" \
-       "availability_zone='local'\n" \
-  > /data/.neon/pageserver.toml && \
-  chown -R neon:neon /data/.neon
-
-# When running a binary that links with libpq, default to using our most recent postgres version.  Binaries
-# that want a particular postgres version will select it explicitly: this is just a default.
-ENV LD_LIBRARY_PATH=/usr/local/v${DEFAULT_PG_VERSION}/lib
-
+RUN mkdir -p /data/.neon/ && chown -R neon:neon /data/.neon/ \
+    && /usr/local/bin/pageserver -D /data/.neon/ --init \
+       -c "id=1234" \
+       -c "broker_endpoint='http://storage_broker:50051'" \
+       -c "pg_distrib_dir='/usr/local/'" \
+       -c "listen_pg_addr='0.0.0.0:6400'" \
+       -c "listen_http_addr='0.0.0.0:9898'"
 
 VOLUME ["/data"]
 USER neon
 EXPOSE 6400
 EXPOSE 9898
-
-CMD ["/usr/local/bin/pageserver", "-D", "/data/.neon"]
-

Dockerfile.build-tools

@@ -1,229 +0,0 @@
-FROM debian:bullseye-slim
-
-# Use ARG as a build-time environment variable here to allow.
-# It's not supposed to be set outside.
-# Alternatively it can be obtained using the following command
-# ```
-# . /etc/os-release && echo "${VERSION_CODENAME}"
-# ```
-ARG DEBIAN_VERSION_CODENAME=bullseye
-
-# Add nonroot user
-RUN useradd -ms /bin/bash nonroot -b /home
-SHELL ["/bin/bash", "-c"]
-
-# System deps
-RUN set -e \
-    && apt update \
-    && apt install -y \
-        autoconf \
-        automake \
-        bison \
-        build-essential \
-        ca-certificates \
-        cmake \
-        curl \
-        flex \
-        git \
-        gnupg \
-        gzip \
-        jq \
-        libcurl4-openssl-dev \
-        libbz2-dev \
-        libffi-dev \
-        liblzma-dev \
-        libncurses5-dev \
-        libncursesw5-dev \
-        libreadline-dev \
-        libseccomp-dev \
-        libsqlite3-dev \
-        libssl-dev \
-        libstdc++-10-dev \
-        libtool \
-        libxml2-dev \
-        libxmlsec1-dev \
-        libxxhash-dev \
-        lsof \
-        make \
-        netcat \
-        net-tools \
-        openssh-client \
-        parallel \
-        pkg-config \
-        unzip \
-        wget \
-        xz-utils \
-        zlib1g-dev \
-        zstd \
-    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
-
-# protobuf-compiler (protoc)
-ENV PROTOC_VERSION=25.1
-RUN curl -fsSL "https://github.com/protocolbuffers/protobuf/releases/download/v${PROTOC_VERSION}/protoc-${PROTOC_VERSION}-linux-$(uname -m | sed 's/aarch64/aarch_64/g').zip" -o "protoc.zip" \
-    && unzip -q protoc.zip -d protoc \
-    && mv protoc/bin/protoc /usr/local/bin/protoc \
-    && mv protoc/include/google /usr/local/include/google \
-    && rm -rf protoc.zip protoc
-
-# s5cmd
-ENV S5CMD_VERSION=2.2.2
-RUN curl -sL "https://github.com/peak/s5cmd/releases/download/v${S5CMD_VERSION}/s5cmd_${S5CMD_VERSION}_Linux-$(uname -m | sed 's/x86_64/64bit/g' | sed 's/aarch64/arm64/g').tar.gz" | tar zxvf - s5cmd \
-    && chmod +x s5cmd \
-    && mv s5cmd /usr/local/bin/s5cmd
-
-# LLVM
-ENV LLVM_VERSION=18
-RUN curl -fsSL 'https://apt.llvm.org/llvm-snapshot.gpg.key' | apt-key add - \
-    && echo "deb http://apt.llvm.org/${DEBIAN_VERSION_CODENAME}/ llvm-toolchain-${DEBIAN_VERSION_CODENAME}-${LLVM_VERSION} main" > /etc/apt/sources.list.d/llvm.stable.list \
-    && apt update \
-    && apt install -y clang-${LLVM_VERSION} llvm-${LLVM_VERSION} \
-    && bash -c 'for f in /usr/bin/clang*-${LLVM_VERSION} /usr/bin/llvm*-${LLVM_VERSION}; do ln -s "${f}" "${f%-${LLVM_VERSION}}"; done' \
-    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
-
-# Install docker
-RUN curl -fsSL https://download.docker.com/linux/ubuntu/gpg | gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg \
-    && echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian ${DEBIAN_VERSION_CODENAME} stable" > /etc/apt/sources.list.d/docker.list \
-    && apt update \
-    && apt install -y docker-ce docker-ce-cli \
-    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
-
-# Configure sudo & docker
-RUN usermod -aG sudo nonroot && \
-    echo '%sudo ALL=(ALL) NOPASSWD:ALL' >> /etc/sudoers && \
-    usermod -aG docker nonroot
-
-# AWS CLI
-RUN curl "https://awscli.amazonaws.com/awscli-exe-linux-$(uname -m).zip" -o "awscliv2.zip" \
-    && unzip -q awscliv2.zip \
-    && ./aws/install \
-    && rm awscliv2.zip
-
-# Mold: A Modern Linker
-ENV MOLD_VERSION=v2.33.0
-RUN set -e \
-    && git clone https://github.com/rui314/mold.git \
-    && mkdir mold/build \
-    && cd mold/build \
-    && git checkout ${MOLD_VERSION} \
-    && cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_CXX_COMPILER=clang++ .. \
-    && cmake --build . -j $(nproc) \
-    && cmake --install . \
-    && cd .. \
-    && rm -rf mold
-
-# LCOV
-# Build lcov from a fork:
-# It includes several bug fixes on top on v2.0 release (https://github.com/linux-test-project/lcov/compare/v2.0...master)
-# And patches from us:
-# - Generates json file with code coverage summary (https://github.com/neondatabase/lcov/commit/426e7e7a22f669da54278e9b55e6d8caabd00af0.tar.gz)
-RUN for package in Capture::Tiny DateTime Devel::Cover Digest::MD5 File::Spec JSON::XS Memory::Process Time::HiRes JSON; do yes | perl -MCPAN -e "CPAN::Shell->notest('install', '$package')"; done \
-    && wget https://github.com/neondatabase/lcov/archive/426e7e7a22f669da54278e9b55e6d8caabd00af0.tar.gz -O lcov.tar.gz \
-    && echo "61a22a62e20908b8b9e27d890bd0ea31f567a7b9668065589266371dcbca0992  lcov.tar.gz" | sha256sum --check \
-    && mkdir -p lcov && tar -xzf lcov.tar.gz -C lcov --strip-components=1 \
-    && cd lcov \
-    && make install \
-    && rm -rf ../lcov.tar.gz
-
-# Compile and install the static OpenSSL library
-ENV OPENSSL_VERSION=1.1.1w
-ENV OPENSSL_PREFIX=/usr/local/openssl
-RUN wget -O /tmp/openssl-${OPENSSL_VERSION}.tar.gz https://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz && \
-    echo "cf3098950cb4d853ad95c0841f1f9c6d3dc102dccfcacd521d93925208b76ac8 /tmp/openssl-${OPENSSL_VERSION}.tar.gz" | sha256sum --check && \
-    cd /tmp && \
-    tar xzvf /tmp/openssl-${OPENSSL_VERSION}.tar.gz && \
-    rm /tmp/openssl-${OPENSSL_VERSION}.tar.gz && \
-    cd /tmp/openssl-${OPENSSL_VERSION} && \
-    ./config --prefix=${OPENSSL_PREFIX}  -static --static no-shared -fPIC && \
-    make -j "$(nproc)" && \
-    make install && \
-    cd /tmp && \
-    rm -rf /tmp/openssl-${OPENSSL_VERSION}
-
-# Use the same version of libicu as the compute nodes so that
-# clusters created using inidb on pageserver can be used by computes.
-#
-# TODO: at this time, Dockerfile.compute-node uses the debian bullseye libicu
-# package, which is 67.1. We're duplicating that knowledge here, and also, technically,
-# Debian has a few patches on top of 67.1 that we're not adding here.
-ENV ICU_VERSION=67.1
-ENV ICU_PREFIX=/usr/local/icu
-
-# Download and build static ICU
-RUN wget -O /tmp/libicu-${ICU_VERSION}.tgz https://github.com/unicode-org/icu/releases/download/release-${ICU_VERSION//./-}/icu4c-${ICU_VERSION//./_}-src.tgz && \
-    echo "94a80cd6f251a53bd2a997f6f1b5ac6653fe791dfab66e1eb0227740fb86d5dc /tmp/libicu-${ICU_VERSION}.tgz" | sha256sum --check && \
-    mkdir /tmp/icu && \
-    pushd /tmp/icu && \
-    tar -xzf /tmp/libicu-${ICU_VERSION}.tgz && \
-    pushd icu/source && \
-    ./configure --prefix=${ICU_PREFIX}  --enable-static --enable-shared=no CXXFLAGS="-fPIC" CFLAGS="-fPIC" && \
-    make -j "$(nproc)" && \
-    make install && \
-    popd && \
-    rm -rf icu && \
-    rm -f /tmp/libicu-${ICU_VERSION}.tgz && \
-    popd
-
-# Switch to nonroot user
-USER nonroot:nonroot
-WORKDIR /home/nonroot
-
-# Python
-ENV PYTHON_VERSION=3.9.19 \
-    PYENV_ROOT=/home/nonroot/.pyenv \
-    PATH=/home/nonroot/.pyenv/shims:/home/nonroot/.pyenv/bin:/home/nonroot/.poetry/bin:$PATH
-RUN set -e \
-    && cd $HOME \
-    && curl -sSO https://raw.githubusercontent.com/pyenv/pyenv-installer/master/bin/pyenv-installer \
-    && chmod +x pyenv-installer \
-    && ./pyenv-installer \
-    && export PYENV_ROOT=/home/nonroot/.pyenv \
-    && export PATH="$PYENV_ROOT/bin:$PATH" \
-    && export PATH="$PYENV_ROOT/shims:$PATH" \
-    && pyenv install ${PYTHON_VERSION} \
-    && pyenv global ${PYTHON_VERSION} \
-    && python --version \
-    && pip install --upgrade pip \
-    && pip --version \
-    && pip install pipenv wheel poetry
-
-# Switch to nonroot user (again)
-USER nonroot:nonroot
-WORKDIR /home/nonroot
-
-# Rust
-# Please keep the version of llvm (installed above) in sync with rust llvm (`rustc --version --verbose | grep LLVM`)
-ENV RUSTC_VERSION=1.81.0
-ENV RUSTUP_HOME="/home/nonroot/.rustup"
-ENV PATH="/home/nonroot/.cargo/bin:${PATH}"
-ARG RUSTFILT_VERSION=0.2.1
-ARG CARGO_HAKARI_VERSION=0.9.30
-ARG CARGO_DENY_VERSION=0.16.1
-ARG CARGO_HACK_VERSION=0.6.31
-ARG CARGO_NEXTEST_VERSION=0.9.72
-RUN curl -sSO https://static.rust-lang.org/rustup/dist/$(uname -m)-unknown-linux-gnu/rustup-init && whoami && \
-	chmod +x rustup-init && \
-	./rustup-init -y --default-toolchain ${RUSTC_VERSION} && \
-	rm rustup-init && \
-    export PATH="$HOME/.cargo/bin:$PATH" && \
-    . "$HOME/.cargo/env" && \
-    cargo --version && rustup --version && \
-    rustup component add llvm-tools rustfmt clippy && \
-    cargo install rustfilt            --version ${RUSTFILT_VERSION} && \
-    cargo install cargo-hakari        --version ${CARGO_HAKARI_VERSION} && \
-    cargo install cargo-deny --locked --version ${CARGO_DENY_VERSION} && \
-    cargo install cargo-hack          --version ${CARGO_HACK_VERSION} && \
-    cargo install cargo-nextest       --version ${CARGO_NEXTEST_VERSION} && \
-    rm -rf /home/nonroot/.cargo/registry && \
-    rm -rf /home/nonroot/.cargo/git
-
-# Show versions
-RUN whoami \
-    && python --version \
-    && pip --version \
-    && cargo --version --verbose \
-    && rustup --version --verbose \
-    && rustc --version --verbose \
-    && clang --version
-
-# Set following flag to check in Makefile if its running in Docker
-RUN touch /home/nonroot/.docker_build

Dockerfile.compute-tools

@@ -0,0 +1,29 @@
+# First transient image to build compute_tools binaries
+# NB: keep in sync with rust image version in .github/workflows/build_and_test.yml
+ARG REPOSITORY=neondatabase
+ARG IMAGE=rust
+ARG TAG=pinned
+
+FROM $REPOSITORY/$IMAGE:$TAG AS rust-build
+WORKDIR /home/nonroot
+
+# Enable https://github.com/paritytech/cachepot to cache Rust crates' compilation results in Docker builds.
+# Set up cachepot to use an AWS S3 bucket for cache results, to reuse it between `docker build` invocations.
+# cachepot falls back to local filesystem if S3 is misconfigured, not failing the build.
+ARG RUSTC_WRAPPER=cachepot
+ENV AWS_REGION=eu-central-1
+ENV CACHEPOT_S3_KEY_PREFIX=cachepot
+ARG CACHEPOT_BUCKET=neon-github-dev
+#ARG AWS_ACCESS_KEY_ID
+#ARG AWS_SECRET_ACCESS_KEY
+
+COPY . .
+
+RUN set -e \
+    && mold -run cargo build -p compute_tools --locked --release \
+    && cachepot -s
+
+# Final image that only has one binary
+FROM debian:bullseye-slim
+
+COPY --from=rust-build /home/nonroot/target/release/compute_ctl /usr/local/bin/compute_ctl

Makefile

@@ -3,9 +3,6 @@ ROOT_PROJECT_DIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST))))
 # Where to install Postgres, default is ./pg_install, maybe useful for package managers
 POSTGRES_INSTALL_DIR ?= $(ROOT_PROJECT_DIR)/pg_install/
 
-OPENSSL_PREFIX_DIR := /usr/local/openssl
-ICU_PREFIX_DIR := /usr/local/icu
-
 #
 # We differentiate between release / debug build types using the BUILD_TYPE
 # environment variable.
@@ -23,31 +20,18 @@ else
 	$(error Bad build type '$(BUILD_TYPE)', see Makefile for options)
 endif
 
-ifeq ($(shell test -e /home/nonroot/.docker_build && echo -n yes),yes)
-	# Exclude static build openssl, icu for local build (MacOS, Linux)
-	# Only keep for build type release and debug
-	PG_CFLAGS += -I$(OPENSSL_PREFIX_DIR)/include
-	PG_CONFIGURE_OPTS += --with-icu
-	PG_CONFIGURE_OPTS += ICU_CFLAGS='-I/$(ICU_PREFIX_DIR)/include -DU_STATIC_IMPLEMENTATION'
-	PG_CONFIGURE_OPTS += ICU_LIBS='-L$(ICU_PREFIX_DIR)/lib -L$(ICU_PREFIX_DIR)/lib64 -licui18n -licuuc -licudata -lstdc++ -Wl,-Bdynamic -lm'
-	PG_CONFIGURE_OPTS += LDFLAGS='-L$(OPENSSL_PREFIX_DIR)/lib -L$(OPENSSL_PREFIX_DIR)/lib64 -L$(ICU_PREFIX_DIR)/lib -L$(ICU_PREFIX_DIR)/lib64 -Wl,-Bstatic -lssl -lcrypto -Wl,-Bdynamic -lrt -lm -ldl -lpthread'
-endif
-
 UNAME_S := $(shell uname -s)
 ifeq ($(UNAME_S),Linux)
 	# Seccomp BPF is only available for Linux
 	PG_CONFIGURE_OPTS += --with-libseccomp
 else ifeq ($(UNAME_S),Darwin)
-	ifndef DISABLE_HOMEBREW
-		# macOS with brew-installed openssl requires explicit paths
-		# It can be configured with OPENSSL_PREFIX variable
-		OPENSSL_PREFIX := $(shell brew --prefix openssl@3)
-		PG_CONFIGURE_OPTS += --with-includes=$(OPENSSL_PREFIX)/include --with-libraries=$(OPENSSL_PREFIX)/lib
-		PG_CONFIGURE_OPTS += PKG_CONFIG_PATH=$(shell brew --prefix icu4c)/lib/pkgconfig
-		# macOS already has bison and flex in the system, but they are old and result in postgres-v14 target failure
-		# brew formulae are keg-only and not symlinked into HOMEBREW_PREFIX, force their usage
-		EXTRA_PATH_OVERRIDES += $(shell brew --prefix bison)/bin/:$(shell brew --prefix flex)/bin/:
-	endif
+	# macOS with brew-installed openssl requires explicit paths
+	# It can be configured with OPENSSL_PREFIX variable
+	OPENSSL_PREFIX ?= $(shell brew --prefix openssl@3)
+	PG_CONFIGURE_OPTS += --with-includes=$(OPENSSL_PREFIX)/include --with-libraries=$(OPENSSL_PREFIX)/lib
+	# macOS already has bison and flex in the system, but they are old and result in postgres-v14 target failure
+	# brew formulae are keg-only and not symlinked into HOMEBREW_PREFIX, force their usage
+	EXTRA_PATH_OVERRIDES += $(shell brew --prefix bison)/bin/:$(shell brew --prefix flex)/bin/:
 endif
 
 # Use -C option so that when PostgreSQL "make install" installs the
@@ -66,10 +50,6 @@ CARGO_BUILD_FLAGS += $(filter -j1,$(MAKEFLAGS))
 CARGO_CMD_PREFIX += $(if $(filter n,$(MAKEFLAGS)),,+)
 # Force cargo not to print progress bar
 CARGO_CMD_PREFIX += CARGO_TERM_PROGRESS_WHEN=never CI=1
-# Set PQ_LIB_DIR to make sure `storage_controller` get linked with bundled libpq (through diesel)
-CARGO_CMD_PREFIX += PQ_LIB_DIR=$(POSTGRES_INSTALL_DIR)/v16/lib
-
-CACHEDIR_TAG_CONTENTS := "Signature: 8a477f597d28d172789f06886806bc55"
 
 #
 # Top level Makefile to build Neon and PostgreSQL
@@ -81,48 +61,28 @@ all: neon postgres neon-pg-ext
 #
 # The 'postgres_ffi' depends on the Postgres headers.
 .PHONY: neon
-neon: postgres-headers walproposer-lib cargo-target-dir
+neon: postgres-headers
 	+@echo "Compiling Neon"
 	$(CARGO_CMD_PREFIX) cargo build $(CARGO_BUILD_FLAGS)
-.PHONY: cargo-target-dir
-cargo-target-dir:
-	# https://github.com/rust-lang/cargo/issues/14281
-	mkdir -p target
-	test -e target/CACHEDIR.TAG || echo "$(CACHEDIR_TAG_CONTENTS)" > target/CACHEDIR.TAG
 
 ### PostgreSQL parts
 # Some rules are duplicated for Postgres v14 and 15. We may want to refactor
 # to avoid the duplication in the future, but it's tolerable for now.
 #
 $(POSTGRES_INSTALL_DIR)/build/%/config.status:
-
-	mkdir -p $(POSTGRES_INSTALL_DIR)
-	test -e $(POSTGRES_INSTALL_DIR)/CACHEDIR.TAG || echo "$(CACHEDIR_TAG_CONTENTS)" > $(POSTGRES_INSTALL_DIR)/CACHEDIR.TAG
-
 	+@echo "Configuring Postgres $* build"
-	@test -s $(ROOT_PROJECT_DIR)/vendor/postgres-$*/configure || { \
-		echo "\nPostgres submodule not found in $(ROOT_PROJECT_DIR)/vendor/postgres-$*/, execute "; \
-		echo "'git submodule update --init --recursive --depth 2 --progress .' in project root.\n"; \
-		exit 1; }
 	mkdir -p $(POSTGRES_INSTALL_DIR)/build/$*
-
-	VERSION=$*; \
-	EXTRA_VERSION=$$(cd $(ROOT_PROJECT_DIR)/vendor/postgres-$$VERSION && git rev-parse HEAD); \
-	(cd $(POSTGRES_INSTALL_DIR)/build/$$VERSION && \
-	env PATH="$(EXTRA_PATH_OVERRIDES):$$PATH" $(ROOT_PROJECT_DIR)/vendor/postgres-$$VERSION/configure \
+	(cd $(POSTGRES_INSTALL_DIR)/build/$* && \
+	env PATH="$(EXTRA_PATH_OVERRIDES):$$PATH" $(ROOT_PROJECT_DIR)/vendor/postgres-$*/configure \
 		CFLAGS='$(PG_CFLAGS)' \
-		$(PG_CONFIGURE_OPTS) --with-extra-version=" ($$EXTRA_VERSION)" \
-		--prefix=$(abspath $(POSTGRES_INSTALL_DIR))/$$VERSION > configure.log)
+		$(PG_CONFIGURE_OPTS) \
+		--prefix=$(abspath $(POSTGRES_INSTALL_DIR))/$* > configure.log)
 
 # nicer alias to run 'configure'
 # Note: I've been unable to use templates for this part of our configuration.
 # I'm not sure why it wouldn't work, but this is the only place (apart from
 # the "build-all-versions" entry points) where direct mention of PostgreSQL
 # versions is used.
-.PHONY: postgres-configure-v17
-postgres-configure-v17: $(POSTGRES_INSTALL_DIR)/build/v17/config.status
-.PHONY: postgres-configure-v16
-postgres-configure-v16: $(POSTGRES_INSTALL_DIR)/build/v16/config.status
 .PHONY: postgres-configure-v15
 postgres-configure-v15: $(POSTGRES_INSTALL_DIR)/build/v15/config.status
 .PHONY: postgres-configure-v14
@@ -148,10 +108,6 @@ postgres-%: postgres-configure-% \
 	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pg_buffercache install
 	+@echo "Compiling pageinspect $*"
 	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pageinspect install
-	+@echo "Compiling amcheck $*"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/amcheck install
-	+@echo "Compiling test_decoding $*"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/test_decoding install
 
 .PHONY: postgres-clean-%
 postgres-clean-%:
@@ -160,10 +116,6 @@ postgres-clean-%:
 	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pageinspect clean
 	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/interfaces/libpq clean
 
-.PHONY: postgres-check-%
-postgres-check-%: postgres-%
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$* MAKELEVEL=0 check
-
 .PHONY: neon-pg-ext-%
 neon-pg-ext-%: postgres-%
 	+@echo "Compiling neon $*"
@@ -176,11 +128,6 @@ neon-pg-ext-%: postgres-%
 	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
 		-C $(POSTGRES_INSTALL_DIR)/build/neon-walredo-$* \
 		-f $(ROOT_PROJECT_DIR)/pgxn/neon_walredo/Makefile install
-	+@echo "Compiling neon_rmgr $*"
-	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-rmgr-$*
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		-C $(POSTGRES_INSTALL_DIR)/build/neon-rmgr-$* \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon_rmgr/Makefile install
 	+@echo "Compiling neon_test_utils $*"
 	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-test-utils-$*
 	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
@@ -191,9 +138,14 @@ neon-pg-ext-%: postgres-%
 	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
 		-C $(POSTGRES_INSTALL_DIR)/build/neon-utils-$* \
 		-f $(ROOT_PROJECT_DIR)/pgxn/neon_utils/Makefile install
+	+@echo "Compiling hnsw $*"
+	mkdir -p $(POSTGRES_INSTALL_DIR)/build/hnsw-$*
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
+		-C $(POSTGRES_INSTALL_DIR)/build/hnsw-$* \
+		-f $(ROOT_PROJECT_DIR)/pgxn/hnsw/Makefile install
 
-.PHONY: neon-pg-clean-ext-%
-neon-pg-clean-ext-%:
+.PHONY: neon-pg-ext-clean-%
+neon-pg-ext-clean-%:
 	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
 	-C $(POSTGRES_INSTALL_DIR)/build/neon-$* \
 	-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile clean
@@ -206,91 +158,39 @@ neon-pg-clean-ext-%:
 	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
 	-C $(POSTGRES_INSTALL_DIR)/build/neon-utils-$* \
 	-f $(ROOT_PROJECT_DIR)/pgxn/neon_utils/Makefile clean
-
-# Build walproposer as a static library. walproposer source code is located
-# in the pgxn/neon directory.
-#
-# We also need to include libpgport.a and libpgcommon.a, because walproposer
-# uses some functions from those libraries.
-#
-# Some object files are removed from libpgport.a and libpgcommon.a because
-# they depend on openssl and other libraries that are not included in our
-# Rust build.
-.PHONY: walproposer-lib
-walproposer-lib: neon-pg-ext-v17
-	+@echo "Compiling walproposer-lib"
-	mkdir -p $(POSTGRES_INSTALL_DIR)/build/walproposer-lib
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/v17/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		-C $(POSTGRES_INSTALL_DIR)/build/walproposer-lib \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile walproposer-lib
-	cp $(POSTGRES_INSTALL_DIR)/v17/lib/libpgport.a $(POSTGRES_INSTALL_DIR)/build/walproposer-lib
-	cp $(POSTGRES_INSTALL_DIR)/v17/lib/libpgcommon.a $(POSTGRES_INSTALL_DIR)/build/walproposer-lib
-	$(AR) d $(POSTGRES_INSTALL_DIR)/build/walproposer-lib/libpgport.a \
-		pg_strong_random.o
-	$(AR) d $(POSTGRES_INSTALL_DIR)/build/walproposer-lib/libpgcommon.a \
-		checksum_helper.o \
-		cryptohash_openssl.o \
-		hmac_openssl.o \
-		md5_common.o \
-		parse_manifest.o \
-		scram-common.o
-ifeq ($(UNAME_S),Linux)
-	$(AR) d $(POSTGRES_INSTALL_DIR)/build/walproposer-lib/libpgcommon.a \
-		pg_crc32c.o
-endif
-
-.PHONY: walproposer-lib-clean
-walproposer-lib-clean:
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/v17/bin/pg_config \
-		-C $(POSTGRES_INSTALL_DIR)/build/walproposer-lib \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile clean
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
+	-C $(POSTGRES_INSTALL_DIR)/build/hnsw-$* \
+	-f $(ROOT_PROJECT_DIR)/pgxn/hnsw/Makefile clean
 
 .PHONY: neon-pg-ext
 neon-pg-ext: \
 	neon-pg-ext-v14 \
-	neon-pg-ext-v15 \
-	neon-pg-ext-v16 \
-	neon-pg-ext-v17
+	neon-pg-ext-v15
 
-.PHONY: neon-pg-clean-ext
-neon-pg-clean-ext: \
-	neon-pg-clean-ext-v14 \
-	neon-pg-clean-ext-v15 \
-	neon-pg-clean-ext-v16 \
-	neon-pg-clean-ext-v17
+.PHONY: neon-pg-ext-clean
+neon-pg-ext-clean: \
+	neon-pg-ext-clean-v14 \
+	neon-pg-ext-clean-v15
 
 # shorthand to build all Postgres versions
 .PHONY: postgres
 postgres: \
 	postgres-v14 \
-	postgres-v15 \
-	postgres-v16 \
-	postgres-v17
+	postgres-v15
 
 .PHONY: postgres-headers
 postgres-headers: \
 	postgres-headers-v14 \
-	postgres-headers-v15 \
-	postgres-headers-v16 \
-	postgres-headers-v17
+	postgres-headers-v15
 
 .PHONY: postgres-clean
 postgres-clean: \
 	postgres-clean-v14 \
-	postgres-clean-v15 \
-	postgres-clean-v16 \
-	postgres-clean-v17
-
-.PHONY: postgres-check
-postgres-check: \
-	postgres-check-v14 \
-	postgres-check-v15 \
-	postgres-check-v16 \
-	postgres-check-v17
+	postgres-clean-v15
 
 # This doesn't remove the effects of 'configure'.
 .PHONY: clean
-clean: postgres-clean neon-pg-clean-ext
+clean: postgres-clean neon-pg-ext-clean
 	$(CARGO_CMD_PREFIX) cargo clean
 
 # This removes everything
@@ -303,44 +203,6 @@ distclean:
 fmt:
 	./pre-commit.py --fix-inplace
 
-postgres-%-pg-bsd-indent: postgres-%
-	+@echo "Compiling pg_bsd_indent"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/tools/pg_bsd_indent/
-
-# Create typedef list for the core. Note that generally it should be combined with
-# buildfarm one to cover platform specific stuff.
-# https://wiki.postgresql.org/wiki/Running_pgindent_on_non-core_code_or_development_code
-postgres-%-typedefs.list: postgres-%
-	$(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/tools/find_typedef $(POSTGRES_INSTALL_DIR)/$*/bin > $@
-
-# Indent postgres. See src/tools/pgindent/README for details.
-.PHONY: postgres-%-pgindent
-postgres-%-pgindent: postgres-%-pg-bsd-indent postgres-%-typedefs.list
-	+@echo merge with buildfarm typedef to cover all platforms
-	+@echo note: I first tried to download from pgbuildfarm.org, but for unclear reason e.g. \
-		REL_16_STABLE list misses PGSemaphoreData
-	# wget -q -O - "http://www.pgbuildfarm.org/cgi-bin/typedefs.pl?branch=REL_16_STABLE" |\
-	# cat - postgres-$*-typedefs.list | sort | uniq > postgres-$*-typedefs-full.list
-	cat $(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/tools/pgindent/typedefs.list |\
-		cat - postgres-$*-typedefs.list | sort | uniq > postgres-$*-typedefs-full.list
-	+@echo note: you might want to run it on selected files/dirs instead.
-	INDENT=$(POSTGRES_INSTALL_DIR)/build/$*/src/tools/pg_bsd_indent/pg_bsd_indent \
-		$(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/tools/pgindent/pgindent --typedefs postgres-$*-typedefs-full.list \
-		$(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/ \
-		--excludes $(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/tools/pgindent/exclude_file_patterns
-	rm -f pg*.BAK
-
-# Indent pxgn/neon.
-.PHONY: neon-pgindent
-neon-pgindent: postgres-v17-pg-bsd-indent neon-pg-ext-v17
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/v17/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		FIND_TYPEDEF=$(ROOT_PROJECT_DIR)/vendor/postgres-v17/src/tools/find_typedef \
-		INDENT=$(POSTGRES_INSTALL_DIR)/build/v17/src/tools/pg_bsd_indent/pg_bsd_indent \
-		PGINDENT_SCRIPT=$(ROOT_PROJECT_DIR)/vendor/postgres-v17/src/tools/pgindent/pgindent \
-		-C $(POSTGRES_INSTALL_DIR)/build/neon-v17 \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile pgindent
-
-
 .PHONY: setup-pre-commit-hook
 setup-pre-commit-hook:
 	ln -s -f $(ROOT_PROJECT_DIR)/pre-commit.py .git/hooks/pre-commit

NOTICE

@@ -1,5 +1,5 @@
 Neon
-Copyright 2022 - 2024 Neon Inc.
+Copyright 2022 Neon Inc.
 
-The PostgreSQL submodules in vendor/ are licensed under the PostgreSQL license.
-See vendor/postgres-vX/COPYRIGHT for details.
+The PostgreSQL submodules in vendor/postgres-v14 and vendor/postgres-v15 are licensed under the
+PostgreSQL license. See vendor/postgres-v14/COPYRIGHT and vendor/postgres-v15/COPYRIGHT.

README.md

@@ -1,13 +1,11 @@
-[![Neon](https://github.com/neondatabase/neon/assets/11527560/f15a17f0-836e-40c5-b35d-030606a6b660)](https://neon.tech)
-
-
+[![Neon](https://user-images.githubusercontent.com/13738772/236813940-dcfdcb5b-69d3-449b-a686-013febe834d4.png)](https://neon.tech)
 
 # Neon
 
 Neon is a serverless open-source alternative to AWS Aurora Postgres. It separates storage and compute and substitutes the PostgreSQL storage layer by redistributing data across a cluster of nodes.
 
 ## Quick start
-Try the [Neon Free Tier](https://neon.tech/github) to create a serverless Postgres instance. Then connect to it with your preferred Postgres client (psql, dbeaver, etc) or use the online [SQL Editor](https://neon.tech/docs/get-started-with-neon/query-with-neon-sql-editor/). See [Connect from any application](https://neon.tech/docs/connect/connect-from-any-app/) for connection instructions.
+Try the [Neon Free Tier](https://neon.tech/docs/introduction/technical-preview-free-tier/) to create a serverless Postgres instance. Then connect to it with your preferred Postgres client (psql, dbeaver, etc) or use the online [SQL Editor](https://neon.tech/docs/get-started-with-neon/query-with-neon-sql-editor/). See [Connect from any application](https://neon.tech/docs/connect/connect-from-any-app/) for connection instructions.
 
 Alternatively, compile and run the project [locally](#running-local-installation).
 
@@ -16,8 +14,8 @@ Alternatively, compile and run the project [locally](#running-local-installation
 A Neon installation consists of compute nodes and the Neon storage engine. Compute nodes are stateless PostgreSQL nodes backed by the Neon storage engine.
 
 The Neon storage engine consists of two major components:
-- Pageserver: Scalable storage backend for the compute nodes.
-- Safekeepers: The safekeepers form a redundant WAL service that received WAL from the compute node, and stores it durably until it has been processed by the pageserver and uploaded to cloud storage.
+- Pageserver. Scalable storage backend for the compute nodes.
+- Safekeepers. The safekeepers form a redundant WAL service that received WAL from the compute node, and stores it durably until it has been processed by the pageserver and uploaded to cloud storage.
 
 See developer documentation in [SUMMARY.md](/docs/SUMMARY.md) for more information.
 
@@ -31,19 +29,18 @@ See developer documentation in [SUMMARY.md](/docs/SUMMARY.md) for more informati
 ```bash
 apt install build-essential libtool libreadline-dev zlib1g-dev flex bison libseccomp-dev \
 libssl-dev clang pkg-config libpq-dev cmake postgresql-client protobuf-compiler \
-libcurl4-openssl-dev openssl python3-poetry lsof libicu-dev
+libcurl4-openssl-dev
 ```
 * On Fedora, these packages are needed:
 ```bash
 dnf install flex bison readline-devel zlib-devel openssl-devel \
   libseccomp-devel perl clang cmake postgresql postgresql-contrib protobuf-compiler \
-  protobuf-devel libcurl-devel openssl poetry lsof libicu-devel libpq-devel python3-devel \
-  libffi-devel
+  protobuf-devel libcurl-devel
 ```
 * On Arch based systems, these packages are needed:
 ```bash
 pacman -S base-devel readline zlib libseccomp openssl clang \
-postgresql-libs cmake postgresql protobuf curl lsof
+postgresql-libs cmake postgresql protobuf curl
 ```
 
 Building Neon requires 3.15+ version of `protoc` (protobuf-compiler). If your distribution provides an older version, you can install a newer version from [here](https://github.com/protocolbuffers/protobuf/releases).
@@ -58,18 +55,12 @@ curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
 1. Install XCode and dependencies
 ```
 xcode-select --install
-brew install protobuf openssl flex bison icu4c pkg-config
+brew install protobuf openssl flex bison
 
 # add openssl to PATH, required for ed25519 keys generation in neon_local
 echo 'export PATH="$(brew --prefix openssl)/bin:$PATH"' >> ~/.zshrc
 ```
 
-If you get errors about missing `m4` you may have to install it manually:
-```
-brew install m4
-brew link --force m4
-```
-
 2. [Install Rust](https://www.rust-lang.org/tools/install)
 ```
 # recommended approach from https://www.rust-lang.org/tools/install
@@ -89,9 +80,9 @@ The project uses [rust toolchain file](./rust-toolchain.toml) to define the vers
 
 This file is automatically picked up by [`rustup`](https://rust-lang.github.io/rustup/overrides.html#the-toolchain-file) that installs (if absent) and uses the toolchain version pinned in the file.
 
-rustup users who want to build with another toolchain can use the [`rustup override`](https://rust-lang.github.io/rustup/overrides.html#directory-overrides) command to set a specific toolchain for the project's directory.
+rustup users who want to build with another toolchain can use [`rustup override`](https://rust-lang.github.io/rustup/overrides.html#directory-overrides) command to set a specific toolchain for the project's directory.
 
-non-rustup users most probably are not getting the same toolchain automatically from the file, so are responsible to manually verify that their toolchain matches the version in the file.
+non-rustup users most probably are not getting the same toolchain automatically from the file, so are responsible to manually verify their toolchain matches the version in the file.
 Newer rustc versions most probably will work fine, yet older ones might not be supported due to some new features used by the project or the crates.
 
 #### Building on Linux
@@ -132,7 +123,7 @@ make -j`sysctl -n hw.logicalcpu` -s
 To run the `psql` client, install the `postgresql-client` package or modify `PATH` and `LD_LIBRARY_PATH` to include `pg_install/bin` and `pg_install/lib`, respectively.
 
 To run the integration tests or Python scripts (not required to use the code), install
-Python (3.9 or higher), and install the python3 packages using `./scripts/pysync` (requires [poetry>=1.8](https://python-poetry.org/)) in the project directory.
+Python (3.9 or higher), and install python3 packages using `./scripts/pysync` (requires [poetry>=1.3](https://python-poetry.org/)) in the project directory.
 
 
 #### Running neon database
@@ -141,13 +132,13 @@ Python (3.9 or higher), and install the python3 packages using `./scripts/pysync
 # Create repository in .neon with proper paths to binaries and data
 # Later that would be responsibility of a package install script
 > cargo neon init
-Initializing pageserver node 1 at '127.0.0.1:64000' in ".neon"
+Starting pageserver at '127.0.0.1:64000' in '.neon'.
 
 # start pageserver, safekeeper, and broker for their intercommunication
 > cargo neon start
-Starting neon broker at 127.0.0.1:50051.
+Starting neon broker at 127.0.0.1:50051
 storage_broker started, pid: 2918372
-Starting pageserver node 1 at '127.0.0.1:64000' in ".neon".
+Starting pageserver at '127.0.0.1:64000' in '.neon'.
 pageserver started, pid: 2918386
 Starting safekeeper at '127.0.0.1:5454' in '.neon/safekeepers/sk1'.
 safekeeper 1 started, pid: 2918437
@@ -158,13 +149,11 @@ tenant 9ef87a5bf0d92544f6fafeeb3239695c successfully created on the pageserver
 Created an initial timeline 'de200bd42b49cc1814412c7e592dd6e9' at Lsn 0/16B5A50 for tenant: 9ef87a5bf0d92544f6fafeeb3239695c
 Setting tenant 9ef87a5bf0d92544f6fafeeb3239695c as a default one
 
-# create postgres compute node
-> cargo neon endpoint create main
-
 # start postgres compute node
 > cargo neon endpoint start main
 Starting new endpoint main (PostgreSQL v14) on timeline de200bd42b49cc1814412c7e592dd6e9 ...
-Starting postgres at 'postgresql://cloud_admin@127.0.0.1:55432/postgres'
+Extracting base backup to create postgres instance: path=.neon/pgdatadirs/tenants/9ef87a5bf0d92544f6fafeeb3239695c/main port=55432
+Starting postgres at 'host=127.0.0.1 port=55432 user=cloud_admin dbname=postgres'
 
 # check list of running postgres instances
 > cargo neon endpoint list
@@ -174,7 +163,7 @@ Starting postgres at 'postgresql://cloud_admin@127.0.0.1:55432/postgres'
 
 2. Now, it is possible to connect to postgres and run some queries:
 ```text
-> psql -p 55432 -h 127.0.0.1 -U cloud_admin postgres
+> psql -p55432 -h 127.0.0.1 -U cloud_admin postgres
 postgres=# CREATE TABLE t(key int primary key, value text);
 CREATE TABLE
 postgres=# insert into t values(1,1);
@@ -197,23 +186,21 @@ Created timeline 'b3b863fa45fa9e57e615f9f2d944e601' at Lsn 0/16F9A00 for tenant:
 (L) main [de200bd42b49cc1814412c7e592dd6e9]
 (L) ┗━ @0/16F9A00: migration_check [b3b863fa45fa9e57e615f9f2d944e601]
 
-# create postgres on that branch
-> cargo neon endpoint create migration_check --branch-name migration_check
-
 # start postgres on that branch
-> cargo neon endpoint start migration_check
+> cargo neon endpoint start migration_check --branch-name migration_check
 Starting new endpoint migration_check (PostgreSQL v14) on timeline b3b863fa45fa9e57e615f9f2d944e601 ...
-Starting postgres at 'postgresql://cloud_admin@127.0.0.1:55434/postgres'
+Extracting base backup to create postgres instance: path=.neon/pgdatadirs/tenants/9ef87a5bf0d92544f6fafeeb3239695c/migration_check port=55433
+Starting postgres at 'host=127.0.0.1 port=55433 user=cloud_admin dbname=postgres'
 
 # check the new list of running postgres instances
 > cargo neon endpoint list
  ENDPOINT         ADDRESS          TIMELINE                          BRANCH NAME      LSN        STATUS
  main             127.0.0.1:55432  de200bd42b49cc1814412c7e592dd6e9  main             0/16F9A38  running
- migration_check  127.0.0.1:55434  b3b863fa45fa9e57e615f9f2d944e601  migration_check  0/16F9A70  running
+ migration_check  127.0.0.1:55433  b3b863fa45fa9e57e615f9f2d944e601  migration_check  0/16F9A70  running
 
 # this new postgres instance will have all the data from 'main' postgres,
 # but all modifications would not affect data in original postgres
-> psql -p 55434 -h 127.0.0.1 -U cloud_admin postgres
+> psql -p55433 -h 127.0.0.1 -U cloud_admin postgres
 postgres=# select * from t;
  key | value
 -----+-------
@@ -224,7 +211,7 @@ postgres=# insert into t values(2,2);
 INSERT 0 1
 
 # check that the new change doesn't affect the 'main' postgres
-> psql -p 55432 -h 127.0.0.1 -U cloud_admin postgres
+> psql -p55432 -h 127.0.0.1 -U cloud_admin postgres
 postgres=# select * from t;
  key | value
 -----+-------
@@ -232,28 +219,14 @@ postgres=# select * from t;
 (1 row)
 ```
 
-4. If you want to run tests afterwards (see below), you must stop all the running pageserver, safekeeper, and postgres instances
+4. If you want to run tests afterward (see below), you must stop all the running of the pageserver, safekeeper, and postgres instances
    you have just started. You can terminate them all with one command:
 ```sh
 > cargo neon stop
 ```
 
-More advanced usages can be found at [Control Plane and Neon Local](./control_plane/README.md).
-
-#### Handling build failures
-
-If you encounter errors during setting up the initial tenant, it's best to stop everything (`cargo neon stop`) and remove the `.neon` directory. Then fix the problems, and start the setup again.
-
 ## Running tests
 
-### Rust unit tests
-
-We are using [`cargo-nextest`](https://nexte.st/) to run the tests in Github Workflows.
-Some crates do not support running plain `cargo test` anymore, prefer `cargo nextest run` instead.
-You can install `cargo-nextest` with `cargo install cargo-nextest`.
-
-### Integration tests
-
 Ensure your dependencies are installed as described [here](https://github.com/neondatabase/neon#dependency-installation-notes).
 
 ```sh
@@ -264,29 +237,6 @@ CARGO_BUILD_FLAGS="--features=testing" make
 ./scripts/pytest
 ```
 
-By default, this runs both debug and release modes, and all supported postgres versions. When
-testing locally, it is convenient to run just one set of permutations, like this:
-
-```sh
-DEFAULT_PG_VERSION=16 BUILD_TYPE=release ./scripts/pytest
-```
-
-## Flamegraphs
-
-You may find yourself in need of flamegraphs for software in this repository.
-You can use [`flamegraph-rs`](https://github.com/flamegraph-rs/flamegraph) or the original [`flamegraph.pl`](https://github.com/brendangregg/FlameGraph). Your choice!
-
->[!IMPORTANT]
-> If you're using `lld` or `mold`, you need the `--no-rosegment` linker argument.
-> It's a [general thing with Rust / lld / mold](https://crbug.com/919499#c16), not specific to this repository.
-> See [this PR for further instructions](https://github.com/neondatabase/neon/pull/6764).
-
-## Cleanup
-
-For cleaning up the source tree from build artifacts, run `make clean` in the source directory.
-
-For removing every artifact from build and configure steps, run `make distclean`, and also consider removing the cargo binaries in the `target` directory, as well as the database in the `.neon` directory. Note that removing the `.neon` directory will remove your database, with all data in it. You have been warned!
-
 ## Documentation
 
 [docs](/docs) Contains a top-level overview of all available markdown documentation.

alek_ext/Cargo.toml

@@ -0,0 +1,21 @@
+[package]
+name = "alek_ext"
+version = "0.1.0"
+edition = "2021"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+anyhow = "1.0.71"
+aws-config = { version = "0.55", default-features = false, features=["rustls"] }
+aws-sdk-s3 = "0.27"
+aws-smithy-http = "0.55"
+aws-credential-types = "0.55"
+aws-types = "0.55"
+remote_storage = { version = "0.1", path = "../libs/remote_storage/" }
+tokio = "1.28.2"
+toml_edit = "0.19.10"
+tracing = "0.1.37"
+tracing-subscriber = "0.3.17"
+
+[workspace]

alek_ext/fuzzystrmatch.control

@@ -0,0 +1,6 @@
+# fuzzystrmatch extension
+comment = 'determine similarities and distance between strings'
+default_version = '1.2'
+module_pathname = '$libdir/fuzzystrmatch'
+relocatable = true
+trusted = true

alek_ext/pg_cron.control

@@ -0,0 +1,5 @@
+comment = 'Job scheduler for PostgreSQL'
+default_version = '1.5'
+module_pathname = '$libdir/pg_cron'
+relocatable = false
+schema = pg_catalog

alek_ext/src/awsmwe_v1.rs

@@ -0,0 +1,33 @@
+/*
+ * This is a MWE of using the aws-sdk-s3 to download a file from an S3 bucket 
+ * */
+
+use aws_sdk_s3::{self, config::Region, Error};
+use aws_config::{self, meta::region::RegionProviderChain};
+
+
+#[tokio::main]
+async fn main() -> Result<(), Error> {
+    let region_provider = RegionProviderChain::first_try(Region::new("eu-central-1"))
+        .or_default_provider()
+        .or_else(Region::new("eu-central-1"));
+
+    let shared_config = aws_config::from_env().region(region_provider).load().await;
+    let client = aws_sdk_s3::Client::new(&shared_config);
+
+    let bucket_name = "neon-dev-extensions";
+    let object_key = "fuzzystrmatch.control";
+    let response = client
+        .get_object()
+        .bucket(bucket_name)
+        .key(object_key)
+        .send()
+        .await?;
+
+    let stuff = response.body;
+    let data = stuff.collect().await.expect("error reading data").to_vec();
+    println!("data: {:?}", std::str::from_utf8(&data));
+
+    Ok(())
+}
+

alek_ext/src/download_with_remote_api_v2.rs

@@ -0,0 +1,52 @@
+/* This is a MWE of using our RemoteStorage API to call the aws stuff and download a file
+ * 
+ */
+
+use remote_storage::*;
+use std::path::Path;
+use std::fs::File;
+use std::io::{BufWriter, Write};
+use toml_edit;
+use anyhow;
+use tokio::io::AsyncReadExt;                                  
+
+#[tokio::main]
+async fn main() -> anyhow::Result<()> {
+    let from_path = "fuzzystrmatch.control";
+    let remote_from_path = RemotePath::new(Path::new(from_path))?;
+    println!("{:?}", remote_from_path.clone());
+
+    // read configurations from `pageserver.toml`
+    let cfg_file_path = Path::new("./../.neon/pageserver.toml");
+    let cfg_file_contents = std::fs::read_to_string(cfg_file_path).unwrap();
+    let toml = cfg_file_contents
+        .parse::<toml_edit::Document>()
+        .expect("Error parsing toml");
+    let remote_storage_data = toml.get("remote_storage")
+        .expect("field should be present");
+    let remote_storage_config = RemoteStorageConfig::from_toml(remote_storage_data)
+        .expect("error parsing toml")
+        .expect("error parsing toml");
+
+    // query S3 bucket
+    let remote_storage = GenericRemoteStorage::from_config(&remote_storage_config)?;
+    let from_path = "fuzzystrmatch.control";
+    let remote_from_path = RemotePath::new(Path::new(from_path))?;
+        
+    println!("{:?}", remote_from_path.clone());
+    // if let GenericRemoteStorage::AwsS3(mybucket) = remote_storage {
+    //     println!("{:?}",mybucket.relative_path_to_s3_object(&remote_from_path));
+    // }
+    let mut data = remote_storage.download(&remote_from_path).await.expect("data yay");
+    let mut write_data_buffer = Vec::new(); 
+    data.download_stream.read_to_end(&mut write_data_buffer).await?;
+    let f = File::create("alek.out").expect("problem creating file");
+    let mut f = BufWriter::new(f);
+    f.write_all(&mut write_data_buffer).expect("error writing data");
+
+    // let stuff = response.body;
+    // let data = stuff.collect().await.expect("error reading data").to_vec();
+    // println!("data: {:?}", std::str::from_utf8(&data));
+
+    Ok(())
+}

alek_ext/src/localfiledownload_v0.rs

@@ -0,0 +1,53 @@
+/*
+ * This is a MWE of "downloading" a local file from a fake local bucket
+ * */
+
+use remote_storage::*;
+use std::path::Path;
+use std::fs::File;
+use std::io::{BufWriter, Write};
+use toml_edit;
+use anyhow;
+use tokio::io::AsyncReadExt;                                  
+
+async fn download_file() -> anyhow::Result<()> {
+    // read configurations from `pageserver.toml`
+    let cfg_file_path = Path::new("./../.neon/pageserver.toml");
+    let cfg_file_contents = std::fs::read_to_string(cfg_file_path).unwrap();
+    let toml = cfg_file_contents
+        .parse::<toml_edit::Document>()
+        .expect("Error parsing toml");
+    let remote_storage_data = toml.get("remote_storage")
+        .expect("field should be present");
+    let remote_storage_config = RemoteStorageConfig::from_toml(remote_storage_data)
+        .expect("error parsing toml")
+        .expect("error parsing toml");
+
+    // query S3 bucket
+    let remote_storage = GenericRemoteStorage::from_config(&remote_storage_config)?;
+    let from_path = "neon-dev-extensions/fuzzystrmatch.control";
+    let remote_from_path = RemotePath::new(Path::new(from_path))?;
+        
+    println!("im fine");
+    println!("{:?}",remote_storage_config);
+
+    let mut data = remote_storage.download(&remote_from_path).await.expect("data yay");
+    let mut write_data_buffer = Vec::new(); 
+
+    data.download_stream.read_to_end(&mut write_data_buffer).await?;
+
+    // write `data` to a file locally
+    let f = File::create("alek.out").expect("problem creating file");
+    let mut f = BufWriter::new(f);
+    f.write_all(&mut write_data_buffer).expect("error writing data");
+
+    Ok(())
+}
+
+#[tokio::main]
+async fn main() {
+    match download_file().await {
+        Err(_)=>println!("Err"),
+        _ => println!("SUCEECESS")
+    }
+}

alek_ext/src/main.rs

@@ -0,0 +1,53 @@
+/* 
+ * This is a MWE of using the RemoteStorage API to list and download files from aws
+*/
+macro_rules! alek { ($expression:expr) => { println!("{:?}", $expression); }; }
+
+use remote_storage::*;
+use std::path::Path;
+use std::fs::File;
+use std::io::{BufWriter, Write};
+use toml_edit;
+use anyhow::{self, Context};
+use tokio::io::AsyncReadExt;
+use tracing::*;
+use tracing_subscriber;
+
+#[tokio::main]
+async fn main() -> anyhow::Result<()> {
+    let subscriber = tracing_subscriber::FmtSubscriber::new();
+    tracing::subscriber::set_global_default(subscriber)?;
+    // TODO: read configs from a different place!
+    let cfg_file_path = Path::new("./../.neon/pageserver.toml");
+    let cfg_file_contents = std::fs::read_to_string(cfg_file_path)
+    .with_context(|| format!( "Failed to read pageserver config at '{}'", cfg_file_path.display()))?;
+    let toml = cfg_file_contents
+        .parse::<toml_edit::Document>()
+        .with_context(|| format!( "Failed to parse '{}' as pageserver config", cfg_file_path.display()))?;
+    let remote_storage_data = toml.get("remote_storage")
+        .context("field should be present")?;
+    let remote_storage_config = RemoteStorageConfig::from_toml(remote_storage_data)?
+        .context("error configuring remote storage")?;
+    let remote_storage = GenericRemoteStorage::from_config(&remote_storage_config)?;
+
+    let folder = RemotePath::new(Path::new("public_extensions"))?;
+    // lists all the files in the public_extensions folder
+    let from_paths = remote_storage.list_files(Some(&folder)).await?;
+    alek!(from_paths);
+    for remote_from_path in from_paths {
+        if remote_from_path.extension() == Some("control") {
+            let file_name = remote_from_path.object_name().expect("it must exist");
+            info!("{:?}", file_name);
+            alek!(&remote_from_path);
+            // download the file
+            let mut download = remote_storage.download(&remote_from_path).await?;
+            // write the file to a local location
+            let mut write_data_buffer = Vec::new(); 
+            download.download_stream.read_to_end(&mut write_data_buffer).await?;
+            let mut output_file = BufWriter::new(File::create(file_name)?);
+            output_file.write_all(&mut write_data_buffer)?;
+        }
+    }
+
+    Ok(())
+}

alek_ext/src/old_multiple_files.rs

@@ -0,0 +1,65 @@
+/* 
+**WIP**
+ * This is a MWE of using our RemoteStorage API to call the aws stuff and download multiple files
+*/
+
+#![allow(unused_imports)]
+use remote_storage::*;
+use std::path::Path;
+use std::fs::File;
+use std::io::{BufWriter, Write};
+use toml_edit;
+use anyhow::{self, Context};
+use tokio::io::AsyncReadExt;                                  
+
+#[tokio::main]
+async fn main() -> anyhow::Result<()> {
+    /* me trying to hack RemotePath into submission */
+
+    let cfg_file_path = Path::new("./../.neon/pageserver.toml");
+    let cfg_file_contents = std::fs::read_to_string(cfg_file_path)
+        .expect("couldn't find pageserver.toml; make sure you are in neon/alek_ext");
+    let toml = cfg_file_contents
+        .parse::<toml_edit::Document>()
+        .expect("Error parsing toml");
+    let remote_storage_data = toml.get("remote_storage")
+        .expect("field should be present");
+    let remote_storage_config = RemoteStorageConfig::from_toml(remote_storage_data)
+        .expect("error parsing toml")
+        .expect("error parsing toml");
+    let remote_storage = GenericRemoteStorage::from_config(&remote_storage_config)?;
+
+    if let GenericRemoteStorage::AwsS3(mybucket) = remote_storage {
+        let resp = mybucket
+        .client
+        .list_objects_v2()
+        .bucket("neon-dev-extensions")
+        .set_prefix(Some("public_extensions".to_string()))
+        .delimiter("/".to_string())
+        .send().await?;
+
+        let z = resp.common_prefixes.unwrap();
+        for yy in z {
+            println!("plzplz: {:?}",yy);
+        }
+        let mut i = 0;
+        for remote_from_path in from_paths {
+            i += 1;
+            println!("{:?}", &remote_from_path);
+            if remote_from_path.extension() == Some("control") {
+                let mut data = remote_storage.download(&remote_from_path).await?;
+                // write `data` to a file locally
+                // TODO: I think that the way I'm doing this is not optimal;
+                // It should be possible to write the data directly to a file
+                // rather than first writing it to a vector...
+                let mut write_data_buffer = Vec::new(); 
+                data.download_stream.read_to_end(&mut write_data_buffer).await?;
+                let f = File::create("alek{i}.out").expect("problem creating file");
+                let mut f = BufWriter::new(f);
+                f.write_all(&mut write_data_buffer).expect("error writing data");
+            }
+        }
+    }
+
+    Ok(())
+}

clippy.toml

@@ -1,14 +0,0 @@
-disallowed-methods = [
-    "tokio::task::block_in_place",
-    # Allow this for now, to deny it later once we stop using Handle::block_on completely
-    # "tokio::runtime::Handle::block_on",
-    # use tokio_epoll_uring_ext instead
-    "tokio_epoll_uring::thread_local_system",
-]
-
-disallowed-macros = [
-    # use std::pin::pin
-    "futures::pin_mut",
-    # cannot disallow this, because clippy finds used from tokio macros
-    #"tokio::pin",
-]

compute_tools/Cargo.toml

@@ -4,46 +4,31 @@ version = "0.1.0"
 edition.workspace = true
 license.workspace = true
 
-[features]
-default = []
-# Enables test specific features.
-testing = []
-
 [dependencies]
 anyhow.workspace = true
 chrono.workspace = true
-cfg-if.workspace = true
 clap.workspace = true
-flate2.workspace = true
 futures.workspace = true
 hyper = { workspace = true, features = ["full"] }
-nix.workspace = true
 notify.workspace = true
 num_cpus.workspace = true
 opentelemetry.workspace = true
 postgres.workspace = true
 regex.workspace = true
+serde.workspace = true
 serde_json.workspace = true
-signal-hook.workspace = true
 tar.workspace = true
 reqwest = { workspace = true, features = ["json"] }
 tokio = { workspace = true, features = ["rt", "rt-multi-thread"] }
 tokio-postgres.workspace = true
-tokio-util.workspace = true
-tokio-stream.workspace = true
 tracing.workspace = true
 tracing-opentelemetry.workspace = true
 tracing-subscriber.workspace = true
 tracing-utils.workspace = true
-thiserror.workspace = true
 url.workspace = true
 
 compute_api.workspace = true
 utils.workspace = true
 workspace_hack.workspace = true
 remote_storage = { version = "0.1", path = "../libs/remote_storage/" }
-vm_monitor = { version = "0.1", path = "../libs/vm_monitor/" }
-zstd = "0.13"
-bytes = "1.0"
-rust-ini = "0.20.0"
-rlimit = "0.10.1"
+toml_edit.workspace = true

compute_tools/README.md

@@ -19,10 +19,9 @@ Also `compute_ctl` spawns two separate service threads:
 - `http-endpoint` runs a Hyper HTTP API server, which serves readiness and the
   last activity requests.
 
-If `AUTOSCALING` environment variable is set, `compute_ctl` will start the
-`vm-monitor` located in [`neon/libs/vm_monitor`]. For VM compute nodes,
-`vm-monitor` communicates with the VM autoscaling system. It coordinates
-downscaling and requests immediate upscaling under resource pressure.
+If the `vm-informant` binary is present at `/bin/vm-informant`, it will also be started. For VM
+compute nodes, `vm-informant` communicates with the VM autoscaling system. It coordinates
+downscaling and (eventually) will request immediate upscaling under resource pressure.
 
 Usage example:
 ```sh
@@ -32,29 +31,6 @@ compute_ctl -D /var/db/postgres/compute \
             -b /usr/local/bin/postgres
 ```
 
-## State Diagram
-
-Computes can be in various states. Below is a diagram that details how a
-compute moves between states.
-
-```mermaid
-%% https://mermaid.js.org/syntax/stateDiagram.html
-stateDiagram-v2
-  [*] --> Empty : Compute spawned
-  Empty --> ConfigurationPending : Waiting for compute spec
-  ConfigurationPending --> Configuration : Received compute spec
-  Configuration --> Failed : Failed to configure the compute
-  Configuration --> Running : Compute has been configured
-  Empty --> Init : Compute spec is immediately available
-  Empty --> TerminationPending : Requested termination
-  Init --> Failed : Failed to start Postgres
-  Init --> Running : Started Postgres
-  Running --> TerminationPending : Requested termination
-  TerminationPending --> Terminated : Terminated compute
-  Failed --> [*] : Compute exited
-  Terminated --> [*] : Compute exited
-```
-
 ## Tests
 
 Cargo formatter:

compute_tools/src/bin/compute_ctl.rs

@@ -5,8 +5,6 @@
 //! - `compute_ctl` accepts cluster (compute node) specification as a JSON file.
 //! - Every start is a fresh start, so the data directory is removed and
 //!   initialized again on each run.
-//! - If remote_extension_config is provided, it will be used to fetch extensions list
-//!   and download `shared_preload_libraries` from the remote storage.
 //! - Next it will put configuration files into the `PGDATA` directory.
 //! - Sync safekeepers and get commit LSN.
 //! - Get `basebackup` from pageserver using the returned on the previous step LSN.
@@ -20,124 +18,55 @@
 //! - `http-endpoint` runs a Hyper HTTP API server, which serves readiness and the
 //!   last activity requests.
 //!
-//! If `AUTOSCALING` environment variable is set, `compute_ctl` will start the
-//! `vm-monitor` located in [`neon/libs/vm_monitor`]. For VM compute nodes,
-//! `vm-monitor` communicates with the VM autoscaling system. It coordinates
-//! downscaling and requests immediate upscaling under resource pressure.
+//! If the `vm-informant` binary is present at `/bin/vm-informant`, it will also be started. For VM
+//! compute nodes, `vm-informant` communicates with the VM autoscaling system. It coordinates
+//! downscaling and (eventually) will request immediate upscaling under resource pressure.
 //!
 //! Usage example:
 //! ```sh
 //! compute_ctl -D /var/db/postgres/compute \
 //!             -C 'postgresql://cloud_admin@localhost/postgres' \
 //!             -S /var/db/postgres/specs/current.json \
-//!             -b /usr/local/bin/postgres \
-//!             -r http://pg-ext-s3-gateway \
+//!             -b /usr/local/bin/postgres
 //! ```
+//!
 use std::collections::HashMap;
 use std::fs::File;
+use std::panic;
 use std::path::Path;
 use std::process::exit;
-use std::sync::atomic::Ordering;
-use std::sync::{mpsc, Arc, Condvar, Mutex, RwLock};
+use std::sync::{mpsc, Arc, Condvar, Mutex};
 use std::{thread, time::Duration};
 
 use anyhow::{Context, Result};
 use chrono::Utc;
 use clap::Arg;
-use compute_tools::lsn_lease::launch_lsn_lease_bg_task_for_static;
-use signal_hook::consts::{SIGQUIT, SIGTERM};
-use signal_hook::{consts::SIGINT, iterator::Signals};
-use tracing::{error, info, warn};
+use tracing::{error, info};
 use url::Url;
 
 use compute_api::responses::ComputeStatus;
-use compute_api::spec::ComputeSpec;
 
-use compute_tools::compute::{
-    forward_termination_signal, ComputeNode, ComputeState, ParsedSpec, PG_PID,
-};
+use compute_tools::compute::{ComputeNode, ComputeState, ParsedSpec};
 use compute_tools::configurator::launch_configurator;
-use compute_tools::extension_server::get_pg_version;
 use compute_tools::http::api::launch_http_server;
 use compute_tools::logger::*;
 use compute_tools::monitor::launch_monitor;
 use compute_tools::params::*;
 use compute_tools::spec::*;
-use compute_tools::swap::resize_swap;
-use rlimit::{setrlimit, Resource};
+use compute_tools::extensions::*;
 
-// this is an arbitrary build tag. Fine as a default / for testing purposes
-// in-case of not-set environment var
-const BUILD_TAG_DEFAULT: &str = "latest";
-
-fn main() -> Result<()> {
-    let (build_tag, clap_args) = init()?;
-
-    // enable core dumping for all child processes
-    setrlimit(Resource::CORE, rlimit::INFINITY, rlimit::INFINITY)?;
-
-    let (pg_handle, start_pg_result) = {
-        // Enter startup tracing context
-        let _startup_context_guard = startup_context_from_env();
-
-        let cli_args = process_cli(&clap_args)?;
-
-        let cli_spec = try_spec_from_cli(&clap_args, &cli_args)?;
-
-        let wait_spec_result = wait_spec(build_tag, cli_args, cli_spec)?;
-
-        start_postgres(&clap_args, wait_spec_result)?
-
-        // Startup is finished, exit the startup tracing span
-    };
-
-    // PostgreSQL is now running, if startup was successful. Wait until it exits.
-    let wait_pg_result = wait_postgres(pg_handle)?;
-
-    let delay_exit = cleanup_after_postgres_exit(start_pg_result)?;
-
-    maybe_delay_exit(delay_exit);
-
-    deinit_and_exit(wait_pg_result);
-}
-
-fn init() -> Result<(String, clap::ArgMatches)> {
+#[tokio::main]
+async fn main() -> Result<()> {
     init_tracing_and_logging(DEFAULT_LOG_LEVEL)?;
 
-    let mut signals = Signals::new([SIGINT, SIGTERM, SIGQUIT])?;
-    thread::spawn(move || {
-        for sig in signals.forever() {
-            handle_exit_signal(sig);
-        }
-    });
-
-    let build_tag = option_env!("BUILD_TAG")
-        .unwrap_or(BUILD_TAG_DEFAULT)
-        .to_string();
-    info!("build_tag: {build_tag}");
-
-    Ok((build_tag, cli().get_matches()))
-}
-
-fn process_cli(matches: &clap::ArgMatches) -> Result<ProcessCliResult> {
-    let pgbin_default = "postgres";
-    let pgbin = matches
-        .get_one::<String>("pgbin")
-        .map(|s| s.as_str())
-        .unwrap_or(pgbin_default);
-
-    let ext_remote_storage = matches
-        .get_one::<String>("remote-ext-config")
-        // Compatibility hack: if the control plane specified any remote-ext-config
-        // use the default value for extension storage proxy gateway.
-        // Remove this once the control plane is updated to pass the gateway URL
-        .map(|conf| {
-            if conf.starts_with("http") {
-                conf.trim_end_matches('/')
-            } else {
-                "http://pg-ext-s3-gateway"
-            }
-        });
+    let matches = cli().get_matches();
+    let config = get_s3_config(&matches)
+        .expect("Hopefully get_s3_config works");
+    download_extension(&config, ExtensionType::Shared)
+        .await
+        .expect("Assume downloads can't error.");
+    // let mut file = File::create("alek.txt")?;
+    // file.write_all(b"success?")?;
 
     let http_port = *matches
         .get_one::<u16>("http-port")
@@ -150,32 +79,7 @@ fn process_cli(matches: &clap::ArgMatches) -> Result<ProcessCliResult> {
         .expect("Postgres connection string is required");
     let spec_json = matches.get_one::<String>("spec");
     let spec_path = matches.get_one::<String>("spec-path");
-    let resize_swap_on_bind = matches.get_flag("resize-swap-on-bind");
 
-    Ok(ProcessCliResult {
-        connstr,
-        pgdata,
-        pgbin,
-        ext_remote_storage,
-        http_port,
-        spec_json,
-        spec_path,
-        resize_swap_on_bind,
-    })
-}
-
-struct ProcessCliResult<'clap> {
-    connstr: &'clap str,
-    pgdata: &'clap str,
-    pgbin: &'clap str,
-    ext_remote_storage: Option<&'clap str>,
-    http_port: u16,
-    spec_json: Option<&'clap String>,
-    spec_path: Option<&'clap String>,
-    resize_swap_on_bind: bool,
-}
-
-fn startup_context_from_env() -> Option<opentelemetry::ContextGuard> {
     // Extract OpenTelemetry context for the startup actions from the
     // TRACEPARENT and TRACESTATE env variables, and attach it to the current
     // tracing context.
@@ -212,7 +116,7 @@ fn startup_context_from_env() -> Option<opentelemetry::ContextGuard> {
     if let Ok(val) = std::env::var("TRACESTATE") {
         startup_tracing_carrier.insert("tracestate".to_string(), val);
     }
-    if !startup_tracing_carrier.is_empty() {
+    let startup_context_guard = if !startup_tracing_carrier.is_empty() {
         use opentelemetry::propagation::TextMapPropagator;
         use opentelemetry::sdk::propagation::TraceContextPropagator;
         let guard = TraceContextPropagator::new()
@@ -222,26 +126,19 @@ fn startup_context_from_env() -> Option<opentelemetry::ContextGuard> {
         Some(guard)
     } else {
         None
-    }
-}
+    };
 
-fn try_spec_from_cli(
-    matches: &clap::ArgMatches,
-    ProcessCliResult {
-        spec_json,
-        spec_path,
-        ..
-    }: &ProcessCliResult,
-) -> Result<CliSpecParams> {
     let compute_id = matches.get_one::<String>("compute-id");
     let control_plane_uri = matches.get_one::<String>("control-plane-uri");
 
+    // Try to use just 'postgres' if no path is provided
+    let pgbin = matches.get_one::<String>("pgbin").unwrap();
+
     let spec;
     let mut live_config_allowed = false;
     match spec_json {
         // First, try to get cluster spec from the cli argument
         Some(json) => {
-            info!("got spec from cli argument {}", json);
             spec = Some(serde_json::from_str(json)?);
         }
         None => {
@@ -250,7 +147,6 @@ fn try_spec_from_cli(
                 let path = Path::new(sp);
                 let file = File::open(path)?;
                 spec = Some(serde_json::from_reader(file)?);
-                live_config_allowed = true;
             } else if let Some(id) = compute_id {
                 if let Some(cp_base) = control_plane_uri {
                     live_config_allowed = true;
@@ -273,40 +169,10 @@ fn try_spec_from_cli(
         }
     };
 
-    Ok(CliSpecParams {
-        spec,
-        live_config_allowed,
-    })
-}
-
-struct CliSpecParams {
-    /// If a spec was provided via CLI or file, the [`ComputeSpec`]
-    spec: Option<ComputeSpec>,
-    live_config_allowed: bool,
-}
-
-fn wait_spec(
-    build_tag: String,
-    ProcessCliResult {
-        connstr,
-        pgdata,
-        pgbin,
-        ext_remote_storage,
-        resize_swap_on_bind,
-        http_port,
-        ..
-    }: ProcessCliResult,
-    CliSpecParams {
-        spec,
-        live_config_allowed,
-    }: CliSpecParams,
-) -> Result<WaitSpecResult> {
     let mut new_state = ComputeState::new();
     let spec_set;
-
     if let Some(spec) = spec {
         let pspec = ParsedSpec::try_from(spec).map_err(|msg| anyhow::anyhow!(msg))?;
-        info!("new pspec.spec: {:?}", pspec.spec);
         new_state.pspec = Some(pspec);
         spec_set = true;
     } else {
@@ -316,33 +182,20 @@ fn wait_spec(
         connstr: Url::parse(connstr).context("cannot parse connstr as a URL")?,
         pgdata: pgdata.to_string(),
         pgbin: pgbin.to_string(),
-        pgversion: get_pg_version(pgbin),
         live_config_allowed,
         state: Mutex::new(new_state),
         state_changed: Condvar::new(),
-        ext_remote_storage: ext_remote_storage.map(|s| s.to_string()),
-        ext_download_progress: RwLock::new(HashMap::new()),
-        build_tag,
     };
     let compute = Arc::new(compute_node);
 
-    // If this is a pooled VM, prewarm before starting HTTP server and becoming
-    // available for binding. Prewarming helps Postgres start quicker later,
-    // because QEMU will already have its memory allocated from the host, and
-    // the necessary binaries will already be cached.
-    if !spec_set {
-        compute.prewarm_postgres()?;
-    }
-
-    // Launch http service first, so that we can serve control-plane requests
-    // while configuration is still in progress.
+    // Launch http service first, so we were able to serve control-plane
+    // requests, while configuration is still in progress.
     let _http_handle =
         launch_http_server(http_port, &compute).expect("cannot launch http endpoint thread");
 
     if !spec_set {
         // No spec provided, hang waiting for it.
         info!("no compute spec provided, waiting");
-
         let mut state = compute.state.lock().unwrap();
         while state.status != ComputeStatus::ConfigurationPending {
             state = compute.state_changed.wait(state).unwrap();
@@ -353,287 +206,76 @@ fn wait_spec(
                 break;
             }
         }
-
-        // Record for how long we slept waiting for the spec.
-        let now = Utc::now();
-        state.metrics.wait_for_spec_ms = now
-            .signed_duration_since(state.start_time)
-            .to_std()
-            .unwrap()
-            .as_millis() as u64;
-
-        // Reset start time, so that the total startup time that is calculated later will
-        // not include the time that we waited for the spec.
-        state.start_time = now;
     }
 
-    launch_lsn_lease_bg_task_for_static(&compute);
-
-    Ok(WaitSpecResult {
-        compute,
-        http_port,
-        resize_swap_on_bind,
-    })
-}
-
-struct WaitSpecResult {
-    compute: Arc<ComputeNode>,
-    // passed through from ProcessCliResult
-    http_port: u16,
-    resize_swap_on_bind: bool,
-}
-
-fn start_postgres(
-    // need to allow unused because `matches` is only used if target_os = "linux"
-    #[allow(unused_variables)] matches: &clap::ArgMatches,
-    WaitSpecResult {
-        compute,
-        http_port,
-        resize_swap_on_bind,
-    }: WaitSpecResult,
-) -> Result<(Option<PostgresHandle>, StartPostgresResult)> {
     // We got all we need, update the state.
     let mut state = compute.state.lock().unwrap();
+
+    // Now we have the spec, and also the tenant id, so we can download the user's personal extensions
+    // download_extension(&config, ExtensionType::Tenant(FIXME tenant_id.into()));
+
+    // Record for how long we slept waiting for the spec.
+    state.metrics.wait_for_spec_ms = Utc::now()
+        .signed_duration_since(state.start_time)
+        .to_std()
+        .unwrap()
+        .as_millis() as u64;
+    // Reset start time to the actual start of the configuration, so that
+    // total startup time was properly measured at the end.
+    state.start_time = Utc::now();
+
     state.status = ComputeStatus::Init;
     compute.state_changed.notify_all();
-
-    info!(
-        "running compute with features: {:?}",
-        state.pspec.as_ref().unwrap().spec.features
-    );
-    // before we release the mutex, fetch the swap size (if any) for later.
-    let swap_size_bytes = state.pspec.as_ref().unwrap().spec.swap_size_bytes;
     drop(state);
 
     // Launch remaining service threads
-    let _monitor_handle = launch_monitor(&compute);
-    let _configurator_handle = launch_configurator(&compute);
-
-    let mut prestartup_failed = false;
-    let mut delay_exit = false;
-
-    // Resize swap to the desired size if the compute spec says so
-    if let (Some(size_bytes), true) = (swap_size_bytes, resize_swap_on_bind) {
-        // To avoid 'swapoff' hitting postgres startup, we need to run resize-swap to completion
-        // *before* starting postgres.
-        //
-        // In theory, we could do this asynchronously if SkipSwapon was enabled for VMs, but this
-        // carries a risk of introducing hard-to-debug issues - e.g. if postgres sometimes gets
-        // OOM-killed during startup because swap wasn't available yet.
-        match resize_swap(size_bytes) {
-            Ok(()) => {
-                let size_gib = size_bytes as f32 / (1 << 20) as f32; // just for more coherent display.
-                info!(%size_bytes, %size_gib, "resized swap");
-            }
-            Err(err) => {
-                let err = err.context("failed to resize swap");
-                error!("{err:#}");
-
-                // Mark compute startup as failed; don't try to start postgres, and report this
-                // error to the control plane when it next asks.
-                prestartup_failed = true;
-                let mut state = compute.state.lock().unwrap();
-                state.error = Some(format!("{err:?}"));
-                state.status = ComputeStatus::Failed;
-                compute.state_changed.notify_all();
-                delay_exit = true;
-            }
-        }
-    }
-
-    let extension_server_port: u16 = http_port;
+    let _monitor_handle = launch_monitor(&compute).expect("cannot launch compute monitor thread");
+    let _configurator_handle =
+        launch_configurator(&compute).expect("cannot launch configurator thread");
 
+    // Now we are ready to download library extensions
+    // download_extension(&config, ExtensionType::Library(FIXME library_name.into()));
+    
     // Start Postgres
-    let mut pg = None;
-    if !prestartup_failed {
-        pg = match compute.start_compute(extension_server_port) {
-            Ok(pg) => Some(pg),
-            Err(err) => {
-                error!("could not start the compute node: {:#}", err);
-                let mut state = compute.state.lock().unwrap();
-                state.error = Some(format!("{:?}", err));
-                state.status = ComputeStatus::Failed;
-                // Notify others that Postgres failed to start. In case of configuring the
-                // empty compute, it's likely that API handler is still waiting for compute
-                // state change. With this we will notify it that compute is in Failed state,
-                // so control plane will know about it earlier and record proper error instead
-                // of timeout.
-                compute.state_changed.notify_all();
-                drop(state); // unlock
-                delay_exit = true;
-                None
-            }
-        };
-    } else {
-        warn!("skipping postgres startup because pre-startup step failed");
-    }
-
-    // Start the vm-monitor if directed to. The vm-monitor only runs on linux
-    // because it requires cgroups.
-    cfg_if::cfg_if! {
-        if #[cfg(target_os = "linux")] {
-            use std::env;
-            use tokio_util::sync::CancellationToken;
-            let vm_monitor_addr = matches
-                .get_one::<String>("vm-monitor-addr")
-                .expect("--vm-monitor-addr should always be set because it has a default arg");
-            let file_cache_connstr = matches.get_one::<String>("filecache-connstr");
-            let cgroup = matches.get_one::<String>("cgroup");
-
-            // Only make a runtime if we need to.
-            // Note: it seems like you can make a runtime in an inner scope and
-            // if you start a task in it it won't be dropped. However, make it
-            // in the outermost scope just to be safe.
-            let rt = if env::var_os("AUTOSCALING").is_some() {
-                Some(
-                    tokio::runtime::Builder::new_multi_thread()
-                        .worker_threads(4)
-                        .enable_all()
-                        .build()
-                        .expect("failed to create tokio runtime for monitor")
-                )
-            } else {
-                None
-            };
-
-            // This token is used internally by the monitor to clean up all threads
-            let token = CancellationToken::new();
-
-            let vm_monitor = rt.as_ref().map(|rt| {
-                rt.spawn(vm_monitor::start(
-                    Box::leak(Box::new(vm_monitor::Args {
-                        cgroup: cgroup.cloned(),
-                        pgconnstr: file_cache_connstr.cloned(),
-                        addr: vm_monitor_addr.clone(),
-                    })),
-                    token.clone(),
-                ))
-            });
+    let mut delay_exit = false;
+    let mut exit_code = None;
+    let pg = match compute.start_compute() {
+        Ok(pg) => Some(pg),
+        Err(err) => {
+            error!("could not start the compute node: {:?}", err);
+            let mut state = compute.state.lock().unwrap();
+            state.error = Some(format!("{:?}", err));
+            state.status = ComputeStatus::Failed;
+            drop(state);
+            delay_exit = true;
+            None
         }
-    }
+    };
 
-    Ok((
-        pg,
-        StartPostgresResult {
-            delay_exit,
-            compute,
-            #[cfg(target_os = "linux")]
-            rt,
-            #[cfg(target_os = "linux")]
-            token,
-            #[cfg(target_os = "linux")]
-            vm_monitor,
-        },
-    ))
-}
-
-type PostgresHandle = (std::process::Child, std::thread::JoinHandle<()>);
-
-struct StartPostgresResult {
-    delay_exit: bool,
-    // passed through from WaitSpecResult
-    compute: Arc<ComputeNode>,
-
-    #[cfg(target_os = "linux")]
-    rt: Option<tokio::runtime::Runtime>,
-    #[cfg(target_os = "linux")]
-    token: tokio_util::sync::CancellationToken,
-    #[cfg(target_os = "linux")]
-    vm_monitor: Option<tokio::task::JoinHandle<Result<()>>>,
-}
-
-fn wait_postgres(pg: Option<PostgresHandle>) -> Result<WaitPostgresResult> {
     // Wait for the child Postgres process forever. In this state Ctrl+C will
     // propagate to Postgres and it will be shut down as well.
-    let mut exit_code = None;
-    if let Some((mut pg, logs_handle)) = pg {
+    if let Some(mut pg) = pg {
+        // Startup is finished, exit the startup tracing span
+        drop(startup_context_guard);
+
         let ecode = pg
             .wait()
             .expect("failed to start waiting on Postgres process");
-        PG_PID.store(0, Ordering::SeqCst);
-
-        // Process has exited, so we can join the logs thread.
-        let _ = logs_handle
-            .join()
-            .map_err(|e| tracing::error!("log thread panicked: {:?}", e));
-
         info!("Postgres exited with code {}, shutting down", ecode);
         exit_code = ecode.code()
     }
 
-    Ok(WaitPostgresResult { exit_code })
-}
-
-struct WaitPostgresResult {
-    exit_code: Option<i32>,
-}
-
-fn cleanup_after_postgres_exit(
-    StartPostgresResult {
-        mut delay_exit,
-        compute,
-        #[cfg(target_os = "linux")]
-        vm_monitor,
-        #[cfg(target_os = "linux")]
-        token,
-        #[cfg(target_os = "linux")]
-        rt,
-    }: StartPostgresResult,
-) -> Result<bool> {
-    // Terminate the vm_monitor so it releases the file watcher on
-    // /sys/fs/cgroup/neon-postgres.
-    // Note: the vm-monitor only runs on linux because it requires cgroups.
-    cfg_if::cfg_if! {
-        if #[cfg(target_os = "linux")] {
-            if let Some(handle) = vm_monitor {
-                // Kills all threads spawned by the monitor
-                token.cancel();
-                // Kills the actual task running the monitor
-                handle.abort();
-
-                // If handle is some, rt must have been used to produce it, and
-                // hence is also some
-                rt.unwrap().shutdown_timeout(Duration::from_secs(2));
-            }
-        }
-    }
-
-    // Maybe sync safekeepers again, to speed up next startup
-    let compute_state = compute.state.lock().unwrap().clone();
-    let pspec = compute_state.pspec.as_ref().expect("spec must be set");
-    if matches!(pspec.spec.mode, compute_api::spec::ComputeMode::Primary) {
-        info!("syncing safekeepers on shutdown");
-        let storage_auth_token = pspec.storage_auth_token.clone();
-        let lsn = compute.sync_safekeepers(storage_auth_token)?;
-        info!("synced safekeepers at lsn {lsn}");
-    }
-
-    let mut state = compute.state.lock().unwrap();
-    if state.status == ComputeStatus::TerminationPending {
-        state.status = ComputeStatus::Terminated;
-        compute.state_changed.notify_all();
-        // we were asked to terminate gracefully, don't exit to avoid restart
-        delay_exit = true
-    }
-    drop(state);
-
     if let Err(err) = compute.check_for_core_dumps() {
         error!("error while checking for core dumps: {err:?}");
     }
 
-    Ok(delay_exit)
-}
-
-fn maybe_delay_exit(delay_exit: bool) {
     // If launch failed, keep serving HTTP requests for a while, so the cloud
     // control plane can get the actual error.
     if delay_exit {
         info!("giving control plane 30s to collect the error before shutdown");
         thread::sleep(Duration::from_secs(30));
     }
-}
 
-fn deinit_and_exit(WaitPostgresResult { exit_code }: WaitPostgresResult) -> ! {
     // Shutdown trace pipeline gracefully, so that it has a chance to send any
     // pending traces before we exit. Shutting down OTEL tracing provider may
     // hang for quite some time, see, for example:
@@ -716,49 +358,6 @@ fn cli() -> clap::Command {
                 .long("control-plane-uri")
                 .value_name("CONTROL_PLANE_API_BASE_URI"),
         )
-        .arg(
-            Arg::new("remote-ext-config")
-                .short('r')
-                .long("remote-ext-config")
-                .value_name("REMOTE_EXT_CONFIG"),
-        )
-        // TODO(fprasx): we currently have default arguments because the cloud PR
-        // to pass them in hasn't been merged yet. We should get rid of them once
-        // the PR is merged.
-        .arg(
-            Arg::new("vm-monitor-addr")
-                .long("vm-monitor-addr")
-                .default_value("0.0.0.0:10301")
-                .value_name("VM_MONITOR_ADDR"),
-        )
-        .arg(
-            Arg::new("cgroup")
-                .long("cgroup")
-                .default_value("neon-postgres")
-                .value_name("CGROUP"),
-        )
-        .arg(
-            Arg::new("filecache-connstr")
-                .long("filecache-connstr")
-                .default_value(
-                    "host=localhost port=5432 dbname=postgres user=cloud_admin sslmode=disable application_name=vm-monitor",
-                )
-                .value_name("FILECACHE_CONNSTR"),
-        )
-        .arg(
-            Arg::new("resize-swap-on-bind")
-                .long("resize-swap-on-bind")
-                .action(clap::ArgAction::SetTrue),
-        )
-}
-
-/// When compute_ctl is killed, send also termination signal to sync-safekeepers
-/// to prevent leakage. TODO: it is better to convert compute_ctl to async and
-/// wait for termination which would be easy then.
-fn handle_exit_signal(sig: i32) {
-    info!("received {sig} termination signal");
-    forward_termination_signal();
-    exit(1);
 }
 
 #[test]

compute_tools/src/catalog.rs

@@ -1,116 +0,0 @@
-use compute_api::{
-    responses::CatalogObjects,
-    spec::{Database, Role},
-};
-use futures::Stream;
-use postgres::{Client, NoTls};
-use std::{path::Path, process::Stdio, result::Result, sync::Arc};
-use tokio::{
-    io::{AsyncBufReadExt, BufReader},
-    process::Command,
-    task,
-};
-use tokio_stream::{self as stream, StreamExt};
-use tokio_util::codec::{BytesCodec, FramedRead};
-use tracing::warn;
-
-use crate::{
-    compute::ComputeNode,
-    pg_helpers::{get_existing_dbs, get_existing_roles},
-};
-
-pub async fn get_dbs_and_roles(compute: &Arc<ComputeNode>) -> anyhow::Result<CatalogObjects> {
-    let connstr = compute.connstr.clone();
-    task::spawn_blocking(move || {
-        let mut client = Client::connect(connstr.as_str(), NoTls)?;
-        let roles: Vec<Role>;
-        {
-            let mut xact = client.transaction()?;
-            roles = get_existing_roles(&mut xact)?;
-        }
-        let databases: Vec<Database> = get_existing_dbs(&mut client)?.values().cloned().collect();
-
-        Ok(CatalogObjects { roles, databases })
-    })
-    .await?
-}
-
-#[derive(Debug, thiserror::Error)]
-pub enum SchemaDumpError {
-    #[error("Database does not exist.")]
-    DatabaseDoesNotExist,
-    #[error("Failed to execute pg_dump.")]
-    IO(#[from] std::io::Error),
-}
-
-// It uses the pg_dump utility to dump the schema of the specified database.
-// The output is streamed back to the caller and supposed to be streamed via HTTP.
-//
-// Before return the result with the output, it checks that pg_dump produced any output.
-// If not, it tries to parse the stderr output to determine if the database does not exist
-// and special error is returned.
-//
-// To make sure that the process is killed when the caller drops the stream, we use tokio kill_on_drop feature.
-pub async fn get_database_schema(
-    compute: &Arc<ComputeNode>,
-    dbname: &str,
-) -> Result<impl Stream<Item = Result<bytes::Bytes, std::io::Error>>, SchemaDumpError> {
-    let pgbin = &compute.pgbin;
-    let basepath = Path::new(pgbin).parent().unwrap();
-    let pgdump = basepath.join("pg_dump");
-    let mut connstr = compute.connstr.clone();
-    connstr.set_path(dbname);
-    let mut cmd = Command::new(pgdump)
-        .arg("--schema-only")
-        .arg(connstr.as_str())
-        .stdout(Stdio::piped())
-        .stderr(Stdio::piped())
-        .kill_on_drop(true)
-        .spawn()?;
-
-    let stdout = cmd.stdout.take().ok_or_else(|| {
-        std::io::Error::new(std::io::ErrorKind::Other, "Failed to capture stdout.")
-    })?;
-
-    let stderr = cmd.stderr.take().ok_or_else(|| {
-        std::io::Error::new(std::io::ErrorKind::Other, "Failed to capture stderr.")
-    })?;
-
-    let mut stdout_reader = FramedRead::new(stdout, BytesCodec::new());
-    let stderr_reader = BufReader::new(stderr);
-
-    let first_chunk = match stdout_reader.next().await {
-        Some(Ok(bytes)) if !bytes.is_empty() => bytes,
-        Some(Err(e)) => {
-            return Err(SchemaDumpError::IO(e));
-        }
-        _ => {
-            let mut lines = stderr_reader.lines();
-            if let Some(line) = lines.next_line().await? {
-                if line.contains(&format!("FATAL:  database \"{}\" does not exist", dbname)) {
-                    return Err(SchemaDumpError::DatabaseDoesNotExist);
-                }
-                warn!("pg_dump stderr: {}", line)
-            }
-            tokio::spawn(async move {
-                while let Ok(Some(line)) = lines.next_line().await {
-                    warn!("pg_dump stderr: {}", line)
-                }
-            });
-
-            return Err(SchemaDumpError::IO(std::io::Error::new(
-                std::io::ErrorKind::Other,
-                "failed to start pg_dump",
-            )));
-        }
-    };
-    let initial_stream = stream::once(Ok(first_chunk.freeze()));
-    // Consume stderr and log warnings
-    tokio::spawn(async move {
-        let mut lines = stderr_reader.lines();
-        while let Ok(Some(line)) = lines.next_line().await {
-            warn!("pg_dump stderr: {}", line)
-        }
-    });
-    Ok(initial_stream.chain(stdout_reader.map(|res| res.map(|b| b.freeze()))))
-}

compute_tools/src/checker.rs

@@ -1,39 +1,12 @@
-use anyhow::{anyhow, Ok, Result};
-use postgres::Client;
+use anyhow::{anyhow, Result};
 use tokio_postgres::NoTls;
-use tracing::{error, instrument, warn};
+use tracing::{error, instrument};
 
 use crate::compute::ComputeNode;
 
-/// Create a special service table for availability checks
-/// only if it does not exist already.
-pub fn create_availability_check_data(client: &mut Client) -> Result<()> {
-    let query = "
-        DO $$
-        BEGIN
-            IF NOT EXISTS(
-                SELECT 1
-                FROM pg_catalog.pg_tables
-                WHERE tablename = 'health_check'
-            )
-            THEN
-            CREATE TABLE health_check (
-                id serial primary key,
-                updated_at timestamptz default now()
-            );
-            INSERT INTO health_check VALUES (1, now())
-                ON CONFLICT (id) DO UPDATE
-                 SET updated_at = now();
-            END IF;
-        END
-        $$;";
-    client.execute(query, &[])?;
-
-    Ok(())
-}
-
 /// Update timestamp in a row in a special service table to check
 /// that we can actually write some data in this particular timeline.
+/// Create table if it's missing.
 #[instrument(skip_all)]
 pub async fn check_writability(compute: &ComputeNode) -> Result<()> {
     // Connect to the database.
@@ -51,28 +24,21 @@ pub async fn check_writability(compute: &ComputeNode) -> Result<()> {
     });
 
     let query = "
+    CREATE TABLE IF NOT EXISTS health_check (
+        id serial primary key,
+        updated_at timestamptz default now()
+    );
     INSERT INTO health_check VALUES (1, now())
         ON CONFLICT (id) DO UPDATE
          SET updated_at = now();";
 
-    match client.simple_query(query).await {
-        Result::Ok(result) => {
-            if result.len() != 1 {
-                return Err(anyhow::anyhow!(
-                    "expected 1 query results, but got {}",
-                    result.len()
-                ));
-            }
-        }
-        Err(err) => {
-            if let Some(state) = err.code() {
-                if state == &tokio_postgres::error::SqlState::DISK_FULL {
-                    warn!("Tenant disk is full");
-                    return Ok(());
-                }
-            }
-            return Err(err.into());
-        }
+    let result = client.simple_query(query).await?;
+
+    if result.len() != 2 {
+        return Err(anyhow::format_err!(
+            "expected 2 query results, but got {}",
+            result.len()
+        ));
     }
 
     Ok(())

compute_tools/src/config.rs

@@ -6,8 +6,8 @@ use std::path::Path;
 use anyhow::Result;
 
 use crate::pg_helpers::escape_conf_value;
-use crate::pg_helpers::{GenericOptionExt, PgOptionsSerialize};
-use compute_api::spec::{ComputeMode, ComputeSpec, GenericOption};
+use crate::pg_helpers::PgOptionsSerialize;
+use compute_api::spec::{ComputeMode, ComputeSpec};
 
 /// Check that `line` is inside a text file and put it there if it is not.
 /// Create file if it doesn't exist.
@@ -17,7 +17,6 @@ pub fn line_in_file(path: &Path, line: &str) -> Result<bool> {
         .write(true)
         .create(true)
         .append(false)
-        .truncate(false)
         .open(path)?;
     let buf = io::BufReader::new(&file);
     let mut count: usize = 0;
@@ -34,11 +33,7 @@ pub fn line_in_file(path: &Path, line: &str) -> Result<bool> {
 }
 
 /// Create or completely rewrite configuration file specified by `path`
-pub fn write_postgres_conf(
-    path: &Path,
-    spec: &ComputeSpec,
-    extension_server_port: Option<u16>,
-) -> Result<()> {
+pub fn write_postgres_conf(path: &Path, spec: &ComputeSpec) -> Result<()> {
     // File::create() destroys the file content if it exists.
     let mut file = File::create(path)?;
 
@@ -47,28 +42,35 @@ pub fn write_postgres_conf(
         writeln!(file, "{}", conf)?;
     }
 
+    write!(file, "{}", &spec.cluster.settings.as_pg_settings())?;
+
     // Add options for connecting to storage
     writeln!(file, "# Neon storage settings")?;
     if let Some(s) = &spec.pageserver_connstring {
-        writeln!(file, "neon.pageserver_connstring={}", escape_conf_value(s))?;
-    }
-    if let Some(stripe_size) = spec.shard_stripe_size {
-        writeln!(file, "neon.stripe_size={stripe_size}")?;
+        writeln!(
+            file,
+            "neon.pageserver_connstring='{}'",
+            escape_conf_value(s)
+        )?;
     }
     if !spec.safekeeper_connstrings.is_empty() {
         writeln!(
             file,
-            "neon.safekeepers={}",
+            "neon.safekeepers='{}'",
             escape_conf_value(&spec.safekeeper_connstrings.join(","))
         )?;
     }
     if let Some(s) = &spec.tenant_id {
-        writeln!(file, "neon.tenant_id={}", escape_conf_value(&s.to_string()))?;
+        writeln!(
+            file,
+            "neon.tenant_id='{}'",
+            escape_conf_value(&s.to_string())
+        )?;
     }
     if let Some(s) = &spec.timeline_id {
         writeln!(
             file,
-            "neon.timeline_id={}",
+            "neon.timeline_id='{}'",
             escape_conf_value(&s.to_string())
         )?;
     }
@@ -86,27 +88,6 @@ pub fn write_postgres_conf(
         }
     }
 
-    if cfg!(target_os = "linux") {
-        // Check /proc/sys/vm/overcommit_memory -- if it equals 2 (i.e. linux memory overcommit is
-        // disabled), then the control plane has enabled swap and we should set
-        // dynamic_shared_memory_type = 'mmap'.
-        //
-        // This is (maybe?) temporary - for more, see https://github.com/neondatabase/cloud/issues/12047.
-        let overcommit_memory_contents = std::fs::read_to_string("/proc/sys/vm/overcommit_memory")
-            // ignore any errors - they may be expected to occur under certain situations (e.g. when
-            // not running in Linux).
-            .unwrap_or_else(|_| String::new());
-        if overcommit_memory_contents.trim() == "2" {
-            let opt = GenericOption {
-                name: "dynamic_shared_memory_type".to_owned(),
-                value: Some("mmap".to_owned()),
-                vartype: "enum".to_owned(),
-            };
-
-            write!(file, "{}", opt.to_pg_setting())?;
-        }
-    }
-
     // If there are any extra options in the 'settings' field, append those
     if spec.cluster.settings.is_some() {
         writeln!(file, "# Managed by compute_ctl: begin")?;
@@ -114,28 +95,5 @@ pub fn write_postgres_conf(
         writeln!(file, "# Managed by compute_ctl: end")?;
     }
 
-    if let Some(port) = extension_server_port {
-        writeln!(file, "neon.extension_server_port={}", port)?;
-    }
-
-    // This is essential to keep this line at the end of the file,
-    // because it is intended to override any settings above.
-    writeln!(file, "include_if_exists = 'compute_ctl_temp_override.conf'")?;
-
     Ok(())
 }
-
-pub fn with_compute_ctl_tmp_override<F>(pgdata_path: &Path, options: &str, exec: F) -> Result<()>
-where
-    F: FnOnce() -> Result<()>,
-{
-    let path = pgdata_path.join("compute_ctl_temp_override.conf");
-    let mut file = File::create(path)?;
-    write!(file, "{}", options)?;
-
-    let res = exec();
-
-    file.set_len(0)?;
-
-    res
-}

compute_tools/src/configurator.rs

@@ -1,13 +1,14 @@
 use std::sync::Arc;
 use std::thread;
 
+use anyhow::Result;
 use tracing::{error, info, instrument};
 
 use compute_api::responses::ComputeStatus;
 
 use crate::compute::ComputeNode;
 
-#[instrument(skip_all)]
+#[instrument(skip(compute))]
 fn configurator_main_loop(compute: &Arc<ComputeNode>) {
     info!("waiting for reconfiguration requests");
     loop {
@@ -41,14 +42,13 @@ fn configurator_main_loop(compute: &Arc<ComputeNode>) {
     }
 }
 
-pub fn launch_configurator(compute: &Arc<ComputeNode>) -> thread::JoinHandle<()> {
+pub fn launch_configurator(compute: &Arc<ComputeNode>) -> Result<thread::JoinHandle<()>> {
     let compute = Arc::clone(compute);
 
-    thread::Builder::new()
+    Ok(thread::Builder::new()
         .name("compute-configurator".into())
         .spawn(move || {
             configurator_main_loop(&compute);
             info!("configurator thread is exited");
-        })
-        .expect("cannot launch configurator thread")
+        })?)
 }

compute_tools/src/extension_server.rs

@@ -1,297 +0,0 @@
-// Download extension files from the extension store
-// and put them in the right place in the postgres directory (share / lib)
-/*
-The layout of the S3 bucket is as follows:
-5615610098 // this is an extension build number
-├── v14
-│   ├── extensions
-│   │   ├── anon.tar.zst
-│   │   └── embedding.tar.zst
-│   └── ext_index.json
-└── v15
-    ├── extensions
-    │   ├── anon.tar.zst
-    │   └── embedding.tar.zst
-    └── ext_index.json
-5615261079
-├── v14
-│   ├── extensions
-│   │   └── anon.tar.zst
-│   └── ext_index.json
-└── v15
-    ├── extensions
-    │   └── anon.tar.zst
-    └── ext_index.json
-5623261088
-├── v14
-│   ├── extensions
-│   │   └── embedding.tar.zst
-│   └── ext_index.json
-└── v15
-    ├── extensions
-    │   └── embedding.tar.zst
-    └── ext_index.json
-
-Note that build number cannot be part of prefix because we might need extensions
-from other build numbers.
-
-ext_index.json stores the control files and location of extension archives
-It also stores a list of public extensions and a library_index
-
-We don't need to duplicate extension.tar.zst files.
-We only need to upload a new one if it is updated.
-(Although currently we just upload every time anyways, hopefully will change
-this sometime)
-
-*access* is controlled by spec
-
-More specifically, here is an example ext_index.json
-{
-    "public_extensions": [
-        "anon",
-        "pg_buffercache"
-    ],
-    "library_index": {
-        "anon": "anon",
-        "pg_buffercache": "pg_buffercache"
-    },
-    "extension_data": {
-        "pg_buffercache": {
-            "control_data": {
-                "pg_buffercache.control": "# pg_buffercache extension \ncomment = 'examine the shared buffer cache' \ndefault_version = '1.3' \nmodule_pathname = '$libdir/pg_buffercache' \nrelocatable = true \ntrusted=true"
-            },
-            "archive_path": "5670669815/v14/extensions/pg_buffercache.tar.zst"
-        },
-        "anon": {
-            "control_data": {
-                "anon.control": "# PostgreSQL Anonymizer (anon) extension \ncomment = 'Data anonymization tools' \ndefault_version = '1.1.0' \ndirectory='extension/anon' \nrelocatable = false \nrequires = 'pgcrypto' \nsuperuser = false \nmodule_pathname = '$libdir/anon' \ntrusted = true \n"
-            },
-            "archive_path": "5670669815/v14/extensions/anon.tar.zst"
-        }
-    }
-}
-*/
-use anyhow::Result;
-use anyhow::{bail, Context};
-use bytes::Bytes;
-use compute_api::spec::RemoteExtSpec;
-use regex::Regex;
-use remote_storage::*;
-use reqwest::StatusCode;
-use std::path::Path;
-use std::str;
-use tar::Archive;
-use tracing::info;
-use tracing::log::warn;
-use zstd::stream::read::Decoder;
-
-fn get_pg_config(argument: &str, pgbin: &str) -> String {
-    // gives the result of `pg_config [argument]`
-    // where argument is a flag like `--version` or `--sharedir`
-    let pgconfig = pgbin
-        .strip_suffix("postgres")
-        .expect("bad pgbin")
-        .to_owned()
-        + "/pg_config";
-    let config_output = std::process::Command::new(pgconfig)
-        .arg(argument)
-        .output()
-        .expect("pg_config error");
-    std::str::from_utf8(&config_output.stdout)
-        .expect("pg_config error")
-        .trim()
-        .to_string()
-}
-
-pub fn get_pg_version(pgbin: &str) -> String {
-    // pg_config --version returns a (platform specific) human readable string
-    // such as "PostgreSQL 15.4". We parse this to v14/v15/v16 etc.
-    let human_version = get_pg_config("--version", pgbin);
-    return parse_pg_version(&human_version).to_string();
-}
-
-fn parse_pg_version(human_version: &str) -> &str {
-    // Normal releases have version strings like "PostgreSQL 15.4". But there
-    // are also pre-release versions like "PostgreSQL 17devel" or "PostgreSQL
-    // 16beta2" or "PostgreSQL 17rc1". And with the --with-extra-version
-    // configure option, you can tack any string to the version number,
-    // e.g. "PostgreSQL 15.4foobar".
-    match Regex::new(r"^PostgreSQL (?<major>\d+).+")
-        .unwrap()
-        .captures(human_version)
-    {
-        Some(captures) if captures.len() == 2 => match &captures["major"] {
-            "14" => return "v14",
-            "15" => return "v15",
-            "16" => return "v16",
-            "17" => return "v17",
-            _ => {}
-        },
-        _ => {}
-    }
-    panic!("Unsuported postgres version {human_version}");
-}
-
-// download the archive for a given extension,
-// unzip it, and place files in the appropriate locations (share/lib)
-pub async fn download_extension(
-    ext_name: &str,
-    ext_path: &RemotePath,
-    ext_remote_storage: &str,
-    pgbin: &str,
-) -> Result<u64> {
-    info!("Download extension {:?} from {:?}", ext_name, ext_path);
-
-    // TODO add retry logic
-    let download_buffer =
-        match download_extension_tar(ext_remote_storage, &ext_path.to_string()).await {
-            Ok(buffer) => buffer,
-            Err(error_message) => {
-                return Err(anyhow::anyhow!(
-                    "error downloading extension {:?}: {:?}",
-                    ext_name,
-                    error_message
-                ));
-            }
-        };
-
-    let download_size = download_buffer.len() as u64;
-    info!("Download size {:?}", download_size);
-    // it's unclear whether it is more performant to decompress into memory or not
-    // TODO: decompressing into memory can be avoided
-    let decoder = Decoder::new(download_buffer.as_ref())?;
-    let mut archive = Archive::new(decoder);
-
-    let unzip_dest = pgbin
-        .strip_suffix("/bin/postgres")
-        .expect("bad pgbin")
-        .to_string()
-        + "/download_extensions";
-    archive.unpack(&unzip_dest)?;
-    info!("Download + unzip {:?} completed successfully", &ext_path);
-
-    let sharedir_paths = (
-        unzip_dest.to_string() + "/share/extension",
-        Path::new(&get_pg_config("--sharedir", pgbin)).join("extension"),
-    );
-    let libdir_paths = (
-        unzip_dest.to_string() + "/lib",
-        Path::new(&get_pg_config("--pkglibdir", pgbin)).to_path_buf(),
-    );
-    // move contents of the libdir / sharedir in unzipped archive to the correct local paths
-    for paths in [sharedir_paths, libdir_paths] {
-        let (zip_dir, real_dir) = paths;
-        info!("mv {zip_dir:?}/*  {real_dir:?}");
-        for file in std::fs::read_dir(zip_dir)? {
-            let old_file = file?.path();
-            let new_file =
-                Path::new(&real_dir).join(old_file.file_name().context("error parsing file")?);
-            info!("moving {old_file:?} to {new_file:?}");
-
-            // extension download failed: Directory not empty (os error 39)
-            match std::fs::rename(old_file, new_file) {
-                Ok(()) => info!("move succeeded"),
-                Err(e) => {
-                    warn!("move failed, probably because the extension already exists: {e}")
-                }
-            }
-        }
-    }
-    info!("done moving extension {ext_name}");
-    Ok(download_size)
-}
-
-// Create extension control files from spec
-pub fn create_control_files(remote_extensions: &RemoteExtSpec, pgbin: &str) {
-    let local_sharedir = Path::new(&get_pg_config("--sharedir", pgbin)).join("extension");
-    for (ext_name, ext_data) in remote_extensions.extension_data.iter() {
-        // Check if extension is present in public or custom.
-        // If not, then it is not allowed to be used by this compute.
-        if let Some(public_extensions) = &remote_extensions.public_extensions {
-            if !public_extensions.contains(ext_name) {
-                if let Some(custom_extensions) = &remote_extensions.custom_extensions {
-                    if !custom_extensions.contains(ext_name) {
-                        continue; // skip this extension, it is not allowed
-                    }
-                }
-            }
-        }
-
-        for (control_name, control_content) in &ext_data.control_data {
-            let control_path = local_sharedir.join(control_name);
-            if !control_path.exists() {
-                info!("writing file {:?}{:?}", control_path, control_content);
-                std::fs::write(control_path, control_content).unwrap();
-            } else {
-                warn!("control file {:?} exists both locally and remotely. ignoring the remote version.", control_path);
-            }
-        }
-    }
-}
-
-// Do request to extension storage proxy, i.e.
-// curl http://pg-ext-s3-gateway/latest/v15/extensions/anon.tar.zst
-// using HHTP GET
-// and return the response body as bytes
-//
-async fn download_extension_tar(ext_remote_storage: &str, ext_path: &str) -> Result<Bytes> {
-    let uri = format!("{}/{}", ext_remote_storage, ext_path);
-
-    info!("Download extension {:?} from uri {:?}", ext_path, uri);
-
-    let resp = reqwest::get(uri).await?;
-
-    match resp.status() {
-        StatusCode::OK => match resp.bytes().await {
-            Ok(resp) => {
-                info!("Download extension {:?} completed successfully", ext_path);
-                Ok(resp)
-            }
-            Err(e) => bail!("could not deserialize remote extension response: {}", e),
-        },
-        StatusCode::SERVICE_UNAVAILABLE => bail!("remote extension is temporarily unavailable"),
-        _ => bail!(
-            "unexpected remote extension response status code: {}",
-            resp.status()
-        ),
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::parse_pg_version;
-
-    #[test]
-    fn test_parse_pg_version() {
-        assert_eq!(parse_pg_version("PostgreSQL 15.4"), "v15");
-        assert_eq!(parse_pg_version("PostgreSQL 15.14"), "v15");
-        assert_eq!(
-            parse_pg_version("PostgreSQL 15.4 (Ubuntu 15.4-0ubuntu0.23.04.1)"),
-            "v15"
-        );
-
-        assert_eq!(parse_pg_version("PostgreSQL 14.15"), "v14");
-        assert_eq!(parse_pg_version("PostgreSQL 14.0"), "v14");
-        assert_eq!(
-            parse_pg_version("PostgreSQL 14.9 (Debian 14.9-1.pgdg120+1"),
-            "v14"
-        );
-
-        assert_eq!(parse_pg_version("PostgreSQL 16devel"), "v16");
-        assert_eq!(parse_pg_version("PostgreSQL 16beta1"), "v16");
-        assert_eq!(parse_pg_version("PostgreSQL 16rc2"), "v16");
-        assert_eq!(parse_pg_version("PostgreSQL 16extra"), "v16");
-    }
-
-    #[test]
-    #[should_panic]
-    fn test_parse_pg_unsupported_version() {
-        parse_pg_version("PostgreSQL 13.14");
-    }
-
-    #[test]
-    #[should_panic]
-    fn test_parse_pg_incorrect_version_format() {
-        parse_pg_version("PostgreSQL 14");
-    }
-}

compute_tools/src/extensions.rs

@@ -0,0 +1,96 @@
+// This is some code for downloading postgres extensions from AWS s3
+use std::path::Path;
+use std::fs::File;
+use std::io::Write;
+use clap::{ArgMatches};
+use toml_edit;
+use remote_storage::*;
+
+fn get_pg_config(argument: &str) -> String {
+    // FIXME: this function panics if it runs into any issues
+    let config_output = std::process::Command::new("pg_config")
+        .arg(argument)
+        .output()
+        .expect("pg_config should be installed");
+    assert!(config_output.status.success());
+    let stdout = std::str::from_utf8(&config_output.stdout).unwrap();
+    stdout.trim().to_string()
+}
+
+fn download_helper(remote_storage: &GenericRemoteStorage, remote_from_path: &RemotePath, to_path: &str) -> anyhow::Result<()> {
+    let file_name = remote_from_path.object_name().expect("it must exist");
+    info!("Downloading {:?}",file_name);
+    let mut download = remote_storage.download(&remote_from_path).await?;
+    let mut write_data_buffer = Vec::new(); 
+    download.download_stream.read_to_end(&mut write_data_buffer).await?;
+    let mut output_file = BufWriter::new(File::create(file_name)?);
+    output_file.write_all(&mut write_data_buffer)?;
+    Ok(())
+}
+
+pub enum ExtensionType {
+    Shared,
+    Tenant(String),
+    Library(String)
+}
+
+pub async fn download_extension(config: &RemoteStorageConfig, ext_type: ExtensionType) -> anyhow::Result<()>{
+    let sharedir = get_pg_config("--sharedir");
+    let sharedir = format!("{}/extension", sharedir);
+    let libdir = get_pg_config("--libdir");
+    let remote_storage = GenericRemoteStorage::from_config(config)?;
+
+    match ext_type {
+        ExtensionType::Shared => {
+            // 1. Download control files from s3-bucket/public/*.control to SHAREDIR/extension
+            // We can do this step even before we have spec,
+            // because public extensions are common for all projects.
+            let folder = RemotePath::new(Path::new("public_extensions"))?;
+            let from_paths = remote_storage.list_files(Some(&folder)).await?;
+            for remote_from_path in from_paths {
+                if remote_from_path.extension() == Some("control") {
+                    // FIXME: CAUTION: if you run this, it will actually write stuff to my postgress directory
+                    // but atm that stuff that it is going to write is not good. 
+                    // don't run atm without changing path
+                    download_helper(&remote_storage, &remote_from_path, &sharedir)?;
+                }
+            }
+        }
+        ExtensionType::Tenant(tenant_id) => {
+            // 2. After we have spec, before project start
+            // Download control files from s3-bucket/[tenant-id]/*.control to SHAREDIR/extension
+            let folder = RemotePath::new(Path::new(format!("{tenant_id}")))?;
+            let from_paths = remote_storage.list_files(Some(&folder)).await?;
+            for remote_from_path in from_paths {
+                if remote_from_path.extension() == Some("control") {
+                    download_helper(&remote_storage, &remote_from_path, &sharedir)?;
+                }
+            }
+        }
+        ExtensionType::Library(library_name) => {
+            // 3. After we have spec, before postgres start
+            // Download preload_shared_libraries from s3-bucket/public/[library-name].control into LIBDIR/
+            let from_path = format!("neon-dev-extensions/public/{library_name}.control");
+            let remote_from_path = RemotePath::new(Path::new(&from_path))?;
+            download_helper(&remote_storage, &remote_from_path, &libdir)?;
+        }
+    }
+    Ok(())
+}
+
+pub fn get_s3_config(arg_matches: &ArgMatches) -> anyhow::Result<RemoteStorageConfig> {
+    // TODO: Right now we are using the same config parameters as pageserver; but should we have our own configs?
+    // TODO: Should we read the s3_config from CLI arguments?
+    let cfg_file_path = Path::new("./../.neon/pageserver.toml");
+    let cfg_file_contents = std::fs::read_to_string(cfg_file_path)
+    .with_context(|| format!( "Failed to read pageserver config at '{}'", cfg_file_path.display()))?;
+    let toml = cfg_file_contents
+        .parse::<toml_edit::Document>()
+        .with_context(|| format!( "Failed to parse '{}' as pageserver config", cfg_file_path.display()))?;
+    let remote_storage_data = toml.get("remote_storage")
+        .context("field should be present")?;
+    let remote_storage_config = RemoteStorageConfig::from_toml(remote_storage_data)?
+        .context("error configuring remote storage")?;
+    Ok(remote_storage_config)
+}
+

compute_tools/src/http/api.rs

@@ -1,25 +1,20 @@
 use std::convert::Infallible;
-use std::net::IpAddr;
-use std::net::Ipv6Addr;
 use std::net::SocketAddr;
 use std::sync::Arc;
 use std::thread;
 
-use crate::catalog::SchemaDumpError;
-use crate::catalog::{get_database_schema, get_dbs_and_roles};
-use crate::compute::forward_termination_signal;
 use crate::compute::{ComputeNode, ComputeState, ParsedSpec};
 use compute_api::requests::ConfigurationRequest;
 use compute_api::responses::{ComputeStatus, ComputeStatusResponse, GenericAPIError};
 
 use anyhow::Result;
-use hyper::header::CONTENT_TYPE;
 use hyper::service::{make_service_fn, service_fn};
 use hyper::{Body, Method, Request, Response, Server, StatusCode};
+use num_cpus;
+use serde_json;
 use tokio::task;
-use tracing::{debug, error, info, warn};
+use tracing::{error, info};
 use tracing_utils::http::OtelName;
-use utils::http::request::must_get_query_param;
 
 fn status_response_from_state(state: &ComputeState) -> ComputeStatusResponse {
     ComputeStatusResponse {
@@ -48,7 +43,7 @@ async fn routes(req: Request<Body>, compute: &Arc<ComputeNode>) -> Response<Body
     match (req.method(), req.uri().path()) {
         // Serialized compute state.
         (&Method::GET, "/status") => {
-            debug!("serving /status GET request");
+            info!("serving /status GET request");
             let state = compute.state.lock().unwrap();
             let status_response = status_response_from_state(&state);
             Response::new(Body::from(serde_json::to_string(&status_response).unwrap()))
@@ -126,122 +121,6 @@ async fn routes(req: Request<Body>, compute: &Arc<ComputeNode>) -> Response<Body
             }
         }
 
-        (&Method::POST, "/terminate") => {
-            info!("serving /terminate POST request");
-            match handle_terminate_request(compute).await {
-                Ok(()) => Response::new(Body::empty()),
-                Err((msg, code)) => {
-                    error!("error handling /terminate request: {msg}");
-                    render_json_error(&msg, code)
-                }
-            }
-        }
-
-        (&Method::GET, "/dbs_and_roles") => {
-            info!("serving /dbs_and_roles GET request",);
-            match get_dbs_and_roles(compute).await {
-                Ok(res) => render_json(Body::from(serde_json::to_string(&res).unwrap())),
-                Err(_) => {
-                    render_json_error("can't get dbs and roles", StatusCode::INTERNAL_SERVER_ERROR)
-                }
-            }
-        }
-
-        (&Method::GET, "/database_schema") => {
-            let database = match must_get_query_param(&req, "database") {
-                Err(e) => return e.into_response(),
-                Ok(database) => database,
-            };
-            info!("serving /database_schema GET request with database: {database}",);
-            match get_database_schema(compute, &database).await {
-                Ok(res) => render_plain(Body::wrap_stream(res)),
-                Err(SchemaDumpError::DatabaseDoesNotExist) => {
-                    render_json_error("database does not exist", StatusCode::NOT_FOUND)
-                }
-                Err(e) => {
-                    error!("can't get schema dump: {}", e);
-                    render_json_error("can't get schema dump", StatusCode::INTERNAL_SERVER_ERROR)
-                }
-            }
-        }
-
-        // download extension files from remote extension storage on demand
-        (&Method::POST, route) if route.starts_with("/extension_server/") => {
-            info!("serving {:?} POST request", route);
-            info!("req.uri {:?}", req.uri());
-
-            // don't even try to download extensions
-            // if no remote storage is configured
-            if compute.ext_remote_storage.is_none() {
-                info!("no extensions remote storage configured");
-                let mut resp = Response::new(Body::from("no remote storage configured"));
-                *resp.status_mut() = StatusCode::INTERNAL_SERVER_ERROR;
-                return resp;
-            }
-
-            let mut is_library = false;
-            if let Some(params) = req.uri().query() {
-                info!("serving {:?} POST request with params: {}", route, params);
-                if params == "is_library=true" {
-                    is_library = true;
-                } else {
-                    let mut resp = Response::new(Body::from("Wrong request parameters"));
-                    *resp.status_mut() = StatusCode::BAD_REQUEST;
-                    return resp;
-                }
-            }
-            let filename = route.split('/').last().unwrap().to_string();
-            info!("serving /extension_server POST request, filename: {filename:?} is_library: {is_library}");
-
-            // get ext_name and path from spec
-            // don't lock compute_state for too long
-            let ext = {
-                let compute_state = compute.state.lock().unwrap();
-                let pspec = compute_state.pspec.as_ref().expect("spec must be set");
-                let spec = &pspec.spec;
-
-                // debug only
-                info!("spec: {:?}", spec);
-
-                let remote_extensions = match spec.remote_extensions.as_ref() {
-                    Some(r) => r,
-                    None => {
-                        info!("no remote extensions spec was provided");
-                        let mut resp = Response::new(Body::from("no remote storage configured"));
-                        *resp.status_mut() = StatusCode::INTERNAL_SERVER_ERROR;
-                        return resp;
-                    }
-                };
-
-                remote_extensions.get_ext(
-                    &filename,
-                    is_library,
-                    &compute.build_tag,
-                    &compute.pgversion,
-                )
-            };
-
-            match ext {
-                Ok((ext_name, ext_path)) => {
-                    match compute.download_extension(ext_name, ext_path).await {
-                        Ok(_) => Response::new(Body::from("OK")),
-                        Err(e) => {
-                            error!("extension download failed: {}", e);
-                            let mut resp = Response::new(Body::from(e.to_string()));
-                            *resp.status_mut() = StatusCode::INTERNAL_SERVER_ERROR;
-                            resp
-                        }
-                    }
-                }
-                Err(e) => {
-                    warn!("extension download failed to find extension: {}", e);
-                    let mut resp = Response::new(Body::from("failed to find file"));
-                    *resp.status_mut() = StatusCode::INTERNAL_SERVER_ERROR;
-                    resp
-                }
-            }
-        }
-
         // Return the `404 Not Found` for any other routes.
         _ => {
             let mut not_found = Response::new(Body::from("404 Not Found"));
@@ -269,7 +148,7 @@ async fn handle_configure_request(
 
         let parsed_spec = match ParsedSpec::try_from(spec) {
             Ok(ps) => ps,
-            Err(msg) => return Err((msg, StatusCode::BAD_REQUEST)),
+            Err(msg) => return Err((msg, StatusCode::PRECONDITION_FAILED)),
         };
 
         // XXX: wrap state update under lock in code blocks. Otherwise,
@@ -335,74 +214,14 @@ fn render_json_error(e: &str, status: StatusCode) -> Response<Body> {
     };
     Response::builder()
         .status(status)
-        .header(CONTENT_TYPE, "application/json")
         .body(Body::from(serde_json::to_string(&error).unwrap()))
         .unwrap()
 }
 
-fn render_json(body: Body) -> Response<Body> {
-    Response::builder()
-        .header(CONTENT_TYPE, "application/json")
-        .body(body)
-        .unwrap()
-}
-
-fn render_plain(body: Body) -> Response<Body> {
-    Response::builder()
-        .header(CONTENT_TYPE, "text/plain")
-        .body(body)
-        .unwrap()
-}
-
-async fn handle_terminate_request(compute: &Arc<ComputeNode>) -> Result<(), (String, StatusCode)> {
-    {
-        let mut state = compute.state.lock().unwrap();
-        if state.status == ComputeStatus::Terminated {
-            return Ok(());
-        }
-        if state.status != ComputeStatus::Empty && state.status != ComputeStatus::Running {
-            let msg = format!(
-                "invalid compute status for termination request: {:?}",
-                state.status.clone()
-            );
-            return Err((msg, StatusCode::PRECONDITION_FAILED));
-        }
-        state.status = ComputeStatus::TerminationPending;
-        compute.state_changed.notify_all();
-        drop(state);
-    }
-    forward_termination_signal();
-    info!("sent signal and notified waiters");
-
-    // Spawn a blocking thread to wait for compute to become Terminated.
-    // This is needed to do not block the main pool of workers and
-    // be able to serve other requests while some particular request
-    // is waiting for compute to finish configuration.
-    let c = compute.clone();
-    task::spawn_blocking(move || {
-        let mut state = c.state.lock().unwrap();
-        while state.status != ComputeStatus::Terminated {
-            state = c.state_changed.wait(state).unwrap();
-            info!(
-                "waiting for compute to become Terminated, current status: {:?}",
-                state.status
-            );
-        }
-
-        Ok(())
-    })
-    .await
-    .unwrap()?;
-    info!("terminated Postgres");
-    Ok(())
-}
-
 // Main Hyper HTTP server function that runs it and blocks waiting on it forever.
 #[tokio::main]
 async fn serve(port: u16, state: Arc<ComputeNode>) {
-    // this usually binds to both IPv4 and IPv6 on linux
-    // see e.g. https://github.com/rust-lang/rust/pull/34440
-    let addr = SocketAddr::new(IpAddr::from(Ipv6Addr::UNSPECIFIED), port);
+    let addr = SocketAddr::from(([0, 0, 0, 0], port));
 
     let make_service = make_service_fn(move |_conn| {
         let state = state.clone();

compute_tools/src/http/openapi_spec.yaml

@@ -68,51 +68,6 @@ paths:
               schema:
                 $ref: "#/components/schemas/Info"
 
-  /dbs_and_roles:
-    get:
-      tags:
-        - Info
-      summary: Get databases and roles in the catalog.
-      description: ""
-      operationId: getDbsAndRoles
-      responses:
-        200:
-          description: Compute schema objects
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/DbsAndRoles"
-
-  /database_schema:
-    get:
-      tags:
-        - Info
-      summary: Get schema dump
-      parameters:
-        - name: database
-          in: query
-          description: Database name to dump.
-          required: true
-          schema:
-            type: string
-          example: "postgres"
-      description: Get schema dump in SQL format.
-      operationId: getDatabaseSchema
-      responses:
-        200:
-          description: Schema dump
-          content:
-            text/plain:
-              schema:
-                type: string
-                description: Schema dump in SQL format.
-        404:
-          description: Non existing database.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-
   /check_writability:
     post:
       tags:
@@ -184,57 +139,6 @@ paths:
             application/json:
               schema:
                 $ref: "#/components/schemas/GenericError"
-  /extension_server:
-    post:
-      tags:
-      - Extension
-      summary: Download extension from S3 to local folder.
-      description: ""
-      operationId: downloadExtension
-      responses:
-        200:
-          description: Extension downloaded
-          content:
-            text/plain:
-              schema:
-                type: string
-                description: Error text or 'OK' if download succeeded.
-                example: "OK"
-        400:
-          description: Request is invalid.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-        500:
-          description: Extension download request failed.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-
-  /terminate:
-    post:
-      tags:
-      - Terminate
-      summary: Terminate Postgres and wait for it to exit
-      description: ""
-      operationId: terminate
-      responses:
-        200:
-          description: Result
-        412:
-          description: "wrong state"
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-        500:
-          description: "Unexpected error"
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
 
 components:
   securitySchemes:
@@ -274,73 +178,6 @@ components:
         num_cpus:
           type: integer
 
-    DbsAndRoles:
-      type: object
-      description: Databases and Roles
-      required:
-        - roles
-        - databases
-      properties:
-        roles:
-          type: array
-          items:
-            $ref: "#/components/schemas/Role"
-        databases:
-          type: array
-          items:
-            $ref: "#/components/schemas/Database"
-
-    Database:
-      type: object
-      description: Database
-      required:
-        - name
-        - owner
-        - restrict_conn
-        - invalid
-      properties:
-        name:
-          type: string
-        owner:
-          type: string
-        options:
-          type: array
-          items:
-            $ref: "#/components/schemas/GenericOption"
-        restrict_conn:
-          type: boolean
-        invalid:
-          type: boolean
-
-    Role:
-      type: object
-      description: Role
-      required:
-        - name
-      properties:
-        name:
-          type: string
-        encrypted_password:
-          type: string
-        options:
-          type: array
-          items:
-            $ref: "#/components/schemas/GenericOption"
-
-    GenericOption:
-      type: object
-      description: Schema Generic option
-      required:
-        - name
-        - vartype
-      properties:
-        name:
-          type: string
-        value:
-          type: string
-        vartype:
-          type: string
-
     ComputeState:
       type: object
       required:

compute_tools/src/lib.rs

@@ -1,21 +1,16 @@
+//!
 //! Various tools and helpers to handle cluster / compute node (Postgres)
 //! configuration.
-#![deny(unsafe_code)]
-#![deny(clippy::undocumented_unsafe_blocks)]
+//!
 pub mod checker;
 pub mod config;
 pub mod configurator;
 pub mod http;
 #[macro_use]
 pub mod logger;
-pub mod catalog;
 pub mod compute;
-pub mod extension_server;
-pub mod lsn_lease;
-mod migration;
 pub mod monitor;
 pub mod params;
 pub mod pg_helpers;
 pub mod spec;
-pub mod swap;
-pub mod sync_sk;
+pub mod extensions;

compute_tools/src/logger.rs

@@ -18,7 +18,6 @@ pub fn init_tracing_and_logging(default_log_level: &str) -> anyhow::Result<()> {
         .unwrap_or_else(|_| tracing_subscriber::EnvFilter::new(default_log_level));
 
     let fmt_layer = tracing_subscriber::fmt::layer()
-        .with_ansi(false)
         .with_target(false)
         .with_writer(std::io::stderr);
 
@@ -38,9 +37,3 @@ pub fn init_tracing_and_logging(default_log_level: &str) -> anyhow::Result<()> {
 
     Ok(())
 }
-
-/// Replace all newline characters with a special character to make it
-/// easier to grep for log messages.
-pub fn inlinify(s: &str) -> String {
-    s.replace('\n', "\u{200B}")
-}

compute_tools/src/lsn_lease.rs

@@ -1,186 +0,0 @@
-use anyhow::bail;
-use anyhow::Result;
-use postgres::{NoTls, SimpleQueryMessage};
-use std::time::SystemTime;
-use std::{str::FromStr, sync::Arc, thread, time::Duration};
-use utils::id::TenantId;
-use utils::id::TimelineId;
-
-use compute_api::spec::ComputeMode;
-use tracing::{info, warn};
-use utils::{
-    lsn::Lsn,
-    shard::{ShardCount, ShardNumber, TenantShardId},
-};
-
-use crate::compute::ComputeNode;
-
-/// Spawns a background thread to periodically renew LSN leases for static compute.
-/// Do nothing if the compute is not in static mode.
-pub fn launch_lsn_lease_bg_task_for_static(compute: &Arc<ComputeNode>) {
-    let (tenant_id, timeline_id, lsn) = {
-        let state = compute.state.lock().unwrap();
-        let spec = state.pspec.as_ref().expect("Spec must be set");
-        match spec.spec.mode {
-            ComputeMode::Static(lsn) => (spec.tenant_id, spec.timeline_id, lsn),
-            _ => return,
-        }
-    };
-    let compute = compute.clone();
-
-    let span = tracing::info_span!("lsn_lease_bg_task", %tenant_id, %timeline_id, %lsn);
-    thread::spawn(move || {
-        let _entered = span.entered();
-        if let Err(e) = lsn_lease_bg_task(compute, tenant_id, timeline_id, lsn) {
-            // TODO: might need stronger error feedback than logging an warning.
-            warn!("Exited with error: {e}");
-        }
-    });
-}
-
-/// Renews lsn lease periodically so static compute are not affected by GC.
-fn lsn_lease_bg_task(
-    compute: Arc<ComputeNode>,
-    tenant_id: TenantId,
-    timeline_id: TimelineId,
-    lsn: Lsn,
-) -> Result<()> {
-    loop {
-        let valid_until = acquire_lsn_lease_with_retry(&compute, tenant_id, timeline_id, lsn)?;
-        let valid_duration = valid_until
-            .duration_since(SystemTime::now())
-            .unwrap_or(Duration::ZERO);
-
-        // Sleep for 60 seconds less than the valid duration but no more than half of the valid duration.
-        let sleep_duration = valid_duration
-            .saturating_sub(Duration::from_secs(60))
-            .max(valid_duration / 2);
-
-        info!(
-            "Succeeded, sleeping for {} seconds",
-            sleep_duration.as_secs()
-        );
-        thread::sleep(sleep_duration);
-    }
-}
-
-/// Acquires lsn lease in a retry loop. Returns the expiration time if a lease is granted.
-/// Returns an error if a lease is explicitly not granted. Otherwise, we keep sending requests.
-fn acquire_lsn_lease_with_retry(
-    compute: &Arc<ComputeNode>,
-    tenant_id: TenantId,
-    timeline_id: TimelineId,
-    lsn: Lsn,
-) -> Result<SystemTime> {
-    let mut attempts = 0usize;
-    let mut retry_period_ms: f64 = 500.0;
-    const MAX_RETRY_PERIOD_MS: f64 = 60.0 * 1000.0;
-
-    loop {
-        // Note: List of pageservers is dynamic, need to re-read configs before each attempt.
-        let configs = {
-            let state = compute.state.lock().unwrap();
-
-            let spec = state.pspec.as_ref().expect("spec must be set");
-
-            let conn_strings = spec.pageserver_connstr.split(',');
-
-            conn_strings
-                .map(|connstr| {
-                    let mut config = postgres::Config::from_str(connstr).expect("Invalid connstr");
-                    if let Some(storage_auth_token) = &spec.storage_auth_token {
-                        info!("Got storage auth token from spec file");
-                        config.password(storage_auth_token.clone());
-                    } else {
-                        info!("Storage auth token not set");
-                    }
-                    config
-                })
-                .collect::<Vec<_>>()
-        };
-
-        let result = try_acquire_lsn_lease(tenant_id, timeline_id, lsn, &configs);
-        match result {
-            Ok(Some(res)) => {
-                return Ok(res);
-            }
-            Ok(None) => {
-                bail!("Permanent error: lease could not be obtained, LSN is behind the GC cutoff");
-            }
-            Err(e) => {
-                warn!("Failed to acquire lsn lease: {e} (attempt {attempts}");
-
-                thread::sleep(Duration::from_millis(retry_period_ms as u64));
-                retry_period_ms *= 1.5;
-                retry_period_ms = retry_period_ms.min(MAX_RETRY_PERIOD_MS);
-            }
-        }
-        attempts += 1;
-    }
-}
-
-/// Tries to acquire an LSN lease through PS page_service API.
-fn try_acquire_lsn_lease(
-    tenant_id: TenantId,
-    timeline_id: TimelineId,
-    lsn: Lsn,
-    configs: &[postgres::Config],
-) -> Result<Option<SystemTime>> {
-    fn get_valid_until(
-        config: &postgres::Config,
-        tenant_shard_id: TenantShardId,
-        timeline_id: TimelineId,
-        lsn: Lsn,
-    ) -> Result<Option<SystemTime>> {
-        let mut client = config.connect(NoTls)?;
-        let cmd = format!("lease lsn {} {} {} ", tenant_shard_id, timeline_id, lsn);
-        let res = client.simple_query(&cmd)?;
-        let msg = match res.first() {
-            Some(msg) => msg,
-            None => bail!("empty response"),
-        };
-        let row = match msg {
-            SimpleQueryMessage::Row(row) => row,
-            _ => bail!("error parsing lsn lease response"),
-        };
-
-        // Note: this will be None if a lease is explicitly not granted.
-        let valid_until_str = row.get("valid_until");
-
-        let valid_until = valid_until_str.map(|s| {
-            SystemTime::UNIX_EPOCH
-                .checked_add(Duration::from_millis(u128::from_str(s).unwrap() as u64))
-                .expect("Time larger than max SystemTime could handle")
-        });
-        Ok(valid_until)
-    }
-
-    let shard_count = configs.len();
-
-    let valid_until = if shard_count > 1 {
-        configs
-            .iter()
-            .enumerate()
-            .map(|(shard_number, config)| {
-                let tenant_shard_id = TenantShardId {
-                    tenant_id,
-                    shard_count: ShardCount::new(shard_count as u8),
-                    shard_number: ShardNumber(shard_number as u8),
-                };
-                get_valid_until(config, tenant_shard_id, timeline_id, lsn)
-            })
-            .collect::<Result<Vec<Option<SystemTime>>>>()?
-            .into_iter()
-            .min()
-            .unwrap()
-    } else {
-        get_valid_until(
-            &configs[0],
-            TenantShardId::unsharded(tenant_id),
-            timeline_id,
-            lsn,
-        )?
-    };
-
-    Ok(valid_until)
-}

compute_tools/src/migration.rs

@@ -1,105 +0,0 @@
-use anyhow::{Context, Result};
-use postgres::Client;
-use tracing::info;
-
-pub(crate) struct MigrationRunner<'m> {
-    client: &'m mut Client,
-    migrations: &'m [&'m str],
-}
-
-impl<'m> MigrationRunner<'m> {
-    pub fn new(client: &'m mut Client, migrations: &'m [&'m str]) -> Self {
-        // The neon_migration.migration_id::id column is a bigint, which is equivalent to an i64
-        assert!(migrations.len() + 1 < i64::MAX as usize);
-
-        Self { client, migrations }
-    }
-
-    fn get_migration_id(&mut self) -> Result<i64> {
-        let query = "SELECT id FROM neon_migration.migration_id";
-        let row = self
-            .client
-            .query_one(query, &[])
-            .context("run_migrations get migration_id")?;
-
-        Ok(row.get::<&str, i64>("id"))
-    }
-
-    fn update_migration_id(&mut self, migration_id: i64) -> Result<()> {
-        let setval = format!("UPDATE neon_migration.migration_id SET id={}", migration_id);
-
-        self.client
-            .simple_query(&setval)
-            .context("run_migrations update id")?;
-
-        Ok(())
-    }
-
-    fn prepare_migrations(&mut self) -> Result<()> {
-        let query = "CREATE SCHEMA IF NOT EXISTS neon_migration";
-        self.client.simple_query(query)?;
-
-        let query = "CREATE TABLE IF NOT EXISTS neon_migration.migration_id (key INT NOT NULL PRIMARY KEY, id bigint NOT NULL DEFAULT 0)";
-        self.client.simple_query(query)?;
-
-        let query = "INSERT INTO neon_migration.migration_id VALUES (0, 0) ON CONFLICT DO NOTHING";
-        self.client.simple_query(query)?;
-
-        let query = "ALTER SCHEMA neon_migration OWNER TO cloud_admin";
-        self.client.simple_query(query)?;
-
-        let query = "REVOKE ALL ON SCHEMA neon_migration FROM PUBLIC";
-        self.client.simple_query(query)?;
-
-        Ok(())
-    }
-
-    pub fn run_migrations(mut self) -> Result<()> {
-        self.prepare_migrations()?;
-
-        let mut current_migration = self.get_migration_id()? as usize;
-        while current_migration < self.migrations.len() {
-            macro_rules! migration_id {
-                ($cm:expr) => {
-                    ($cm + 1) as i64
-                };
-            }
-
-            let migration = self.migrations[current_migration];
-
-            if migration.starts_with("-- SKIP") {
-                info!("Skipping migration id={}", migration_id!(current_migration));
-            } else {
-                info!(
-                    "Running migration id={}:\n{}\n",
-                    migration_id!(current_migration),
-                    migration
-                );
-
-                self.client
-                    .simple_query("BEGIN")
-                    .context("begin migration")?;
-
-                self.client.simple_query(migration).with_context(|| {
-                    format!(
-                        "run_migrations migration id={}",
-                        migration_id!(current_migration)
-                    )
-                })?;
-
-                // Migration IDs start at 1
-                self.update_migration_id(migration_id!(current_migration))?;
-
-                self.client
-                    .simple_query("COMMIT")
-                    .context("commit migration")?;
-
-                info!("Finished migration id={}", migration_id!(current_migration));
-            }
-
-            current_migration += 1;
-        }
-
-        Ok(())
-    }
-}

compute_tools/src/migrations/0001-neon_superuser_bypass_rls.sql

@@ -1 +0,0 @@
-ALTER ROLE neon_superuser BYPASSRLS;

compute_tools/src/migrations/0002-alter_roles.sql

@@ -1,18 +0,0 @@
-DO $$
-DECLARE
-    role_name text;
-BEGIN
-    FOR role_name IN SELECT rolname FROM pg_roles WHERE pg_has_role(rolname, 'neon_superuser', 'member')
-    LOOP
-        RAISE NOTICE 'EXECUTING ALTER ROLE % INHERIT', quote_ident(role_name);
-        EXECUTE 'ALTER ROLE ' || quote_ident(role_name) || ' INHERIT';
-    END LOOP;
-
-    FOR role_name IN SELECT rolname FROM pg_roles
-        WHERE
-            NOT pg_has_role(rolname, 'neon_superuser', 'member') AND NOT starts_with(rolname, 'pg_')
-    LOOP
-        RAISE NOTICE 'EXECUTING ALTER ROLE % NOBYPASSRLS', quote_ident(role_name);
-        EXECUTE 'ALTER ROLE ' || quote_ident(role_name) || ' NOBYPASSRLS';
-    END LOOP;
-END $$;

compute_tools/src/migrations/0003-grant_pg_create_subscription_to_neon_superuser.sql

@@ -1,6 +0,0 @@
-DO $$
-BEGIN
-    IF (SELECT setting::numeric >= 160000 FROM pg_settings WHERE name = 'server_version_num') THEN
-        EXECUTE 'GRANT pg_create_subscription TO neon_superuser';
-    END IF;
-END $$;

compute_tools/src/migrations/0004-grant_pg_monitor_to_neon_superuser.sql

@@ -1 +0,0 @@
-GRANT pg_monitor TO neon_superuser WITH ADMIN OPTION;

compute_tools/src/migrations/0005-grant_all_on_tables_to_neon_superuser.sql

@@ -1,4 +0,0 @@
--- SKIP: Deemed insufficient for allowing relations created by extensions to be
---       interacted with by neon_superuser without permission issues.
-
-ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT ALL ON TABLES TO neon_superuser;

compute_tools/src/migrations/0006-grant_all_on_sequences_to_neon_superuser.sql

@@ -1,4 +0,0 @@
--- SKIP: Deemed insufficient for allowing relations created by extensions to be
---       interacted with by neon_superuser without permission issues.
-
-ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT ALL ON SEQUENCES TO neon_superuser;

compute_tools/src/migrations/0007-grant_all_on_tables_to_neon_superuser_with_grant_option.sql

@@ -1,3 +0,0 @@
--- SKIP: Moved inline to the handle_grants() functions.
-
-ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT ALL ON TABLES TO neon_superuser WITH GRANT OPTION;

compute_tools/src/migrations/0008-grant_all_on_sequences_to_neon_superuser_with_grant_option.sql

@@ -1,3 +0,0 @@
--- SKIP: Moved inline to the handle_grants() functions.
-
-ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT ALL ON SEQUENCES TO neon_superuser WITH GRANT OPTION;

compute_tools/src/migrations/0009-revoke_replication_for_previously_allowed_roles.sql

@@ -1,13 +0,0 @@
--- SKIP: The original goal of this migration was to prevent creating
---       subscriptions, but this migration was insufficient.
-
-DO $$
-DECLARE
-    role_name TEXT;
-BEGIN
-    FOR role_name IN SELECT rolname FROM pg_roles WHERE rolreplication IS TRUE
-    LOOP
-        RAISE NOTICE 'EXECUTING ALTER ROLE % NOREPLICATION', quote_ident(role_name);
-        EXECUTE 'ALTER ROLE ' || quote_ident(role_name) || ' NOREPLICATION';
-    END LOOP;
-END $$;

compute_tools/src/migrations/0010-grant_snapshot_synchronization_funcs_to_neon_superuser.sql

@@ -1,7 +0,0 @@
-DO $$
-BEGIN
-    IF (SELECT setting::numeric >= 160000 FROM pg_settings WHERE name = 'server_version_num') THEN
-       EXECUTE 'GRANT EXECUTE ON FUNCTION pg_export_snapshot TO neon_superuser';
-       EXECUTE 'GRANT EXECUTE ON FUNCTION pg_log_standby_snapshot TO neon_superuser';
-    END IF;
-END $$;

compute_tools/src/migrations/0011-grant_pg_show_replication_origin_status_to_neon_superuser.sql

@@ -1 +0,0 @@
-GRANT EXECUTE ON FUNCTION pg_show_replication_origin_status TO neon_superuser;

compute_tools/src/monitor.rs

@@ -1,199 +1,101 @@
 use std::sync::Arc;
-use std::{thread, time::Duration};
+use std::{thread, time};
 
+use anyhow::Result;
 use chrono::{DateTime, Utc};
 use postgres::{Client, NoTls};
-use tracing::{debug, error, info, warn};
+use tracing::{debug, info};
 
 use crate::compute::ComputeNode;
-use compute_api::responses::ComputeStatus;
-use compute_api::spec::ComputeFeature;
 
-const MONITOR_CHECK_INTERVAL: Duration = Duration::from_millis(500);
+const MONITOR_CHECK_INTERVAL: u64 = 500; // milliseconds
 
 // Spin in a loop and figure out the last activity time in the Postgres.
 // Then update it in the shared state. This function never errors out.
-// NB: the only expected panic is at `Mutex` unwrap(), all other errors
-// should be handled gracefully.
+// XXX: the only expected panic is at `RwLock` unwrap().
 fn watch_compute_activity(compute: &ComputeNode) {
     // Suppose that `connstr` doesn't change
-    let mut connstr = compute.connstr.clone();
-    connstr
-        .query_pairs_mut()
-        .append_pair("application_name", "compute_activity_monitor");
-    let connstr = connstr.as_str();
-
-    // During startup and configuration we connect to every Postgres database,
-    // but we don't want to count this as some user activity. So wait until
-    // the compute fully started before monitoring activity.
-    wait_for_postgres_start(compute);
-
+    let connstr = compute.connstr.as_str();
     // Define `client` outside of the loop to reuse existing connection if it's active.
     let mut client = Client::connect(connstr, NoTls);
+    let timeout = time::Duration::from_millis(MONITOR_CHECK_INTERVAL);
 
-    let mut sleep = false;
-    let mut prev_active_time: Option<f64> = None;
-    let mut prev_sessions: Option<i64> = None;
-
-    if compute.has_feature(ComputeFeature::ActivityMonitorExperimental) {
-        info!("starting experimental activity monitor for {}", connstr);
-    } else {
-        info!("starting activity monitor for {}", connstr);
-    }
+    info!("watching Postgres activity at {}", connstr);
 
     loop {
-        // We use `continue` a lot, so it's more convenient to sleep at the top of the loop.
-        // But skip the first sleep, so we can connect to Postgres immediately.
-        if sleep {
-            // Should be outside of the mutex lock to allow others to read while we sleep.
-            thread::sleep(MONITOR_CHECK_INTERVAL);
-        } else {
-            sleep = true;
-        }
+        // Should be outside of the write lock to allow others to read while we sleep.
+        thread::sleep(timeout);
 
         match &mut client {
             Ok(cli) => {
                 if cli.is_closed() {
-                    info!("connection to Postgres is closed, trying to reconnect");
+                    info!("connection to postgres closed, trying to reconnect");
 
                     // Connection is closed, reconnect and try again.
                     client = Client::connect(connstr, NoTls);
                     continue;
                 }
 
-                // This is a new logic, only enable if the feature flag is set.
-                // TODO: remove this once we are sure that it works OR drop it altogether.
-                if compute.has_feature(ComputeFeature::ActivityMonitorExperimental) {
-                    // First, check if the total active time or sessions across all databases has changed.
-                    // If it did, it means that user executed some queries. In theory, it can even go down if
-                    // some databases were dropped, but it's still a user activity.
-                    match get_database_stats(cli) {
-                        Ok((active_time, sessions)) => {
-                            let mut detected_activity = false;
+                // Get all running client backends except ourself, use RFC3339 DateTime format.
+                let backends = cli
+                    .query(
+                        "SELECT state, to_char(state_change, 'YYYY-MM-DD\"T\"HH24:MI:SS.US\"Z\"') AS state_change
+                         FROM pg_stat_activity
+                         WHERE backend_type = 'client backend'
+                            AND pid != pg_backend_pid()
+                            AND usename != 'cloud_admin';", // XXX: find a better way to filter other monitors?
+                        &[],
+                    );
+                let mut last_active = compute.state.lock().unwrap().last_active;
 
-                            prev_active_time = match prev_active_time {
-                                Some(prev_active_time) => {
-                                    if active_time != prev_active_time {
-                                        detected_activity = true;
-                                    }
-                                    Some(active_time)
-                                }
-                                None => Some(active_time),
+                if let Ok(backs) = backends {
+                    let mut idle_backs: Vec<DateTime<Utc>> = vec![];
+
+                    for b in backs.into_iter() {
+                        let state: String = match b.try_get("state") {
+                            Ok(state) => state,
+                            Err(_) => continue,
+                        };
+
+                        if state == "idle" {
+                            let change: String = match b.try_get("state_change") {
+                                Ok(state_change) => state_change,
+                                Err(_) => continue,
                             };
-                            prev_sessions = match prev_sessions {
-                                Some(prev_sessions) => {
-                                    if sessions != prev_sessions {
-                                        detected_activity = true;
-                                    }
-                                    Some(sessions)
+                            let change = DateTime::parse_from_rfc3339(&change);
+                            match change {
+                                Ok(t) => idle_backs.push(t.with_timezone(&Utc)),
+                                Err(e) => {
+                                    info!("cannot parse backend state_change DateTime: {}", e);
+                                    continue;
                                 }
-                                None => Some(sessions),
-                            };
-
-                            if detected_activity {
-                                // Update the last active time and continue, we don't need to
-                                // check backends state change.
-                                compute.update_last_active(Some(Utc::now()));
-                                continue;
                             }
+                        } else {
+                            // Found non-idle backend, so the last activity is NOW.
+                            // Save it and exit the for loop. Also clear the idle backend
+                            // `state_change` timestamps array as it doesn't matter now.
+                            last_active = Some(Utc::now());
+                            idle_backs.clear();
+                            break;
                         }
-                        Err(e) => {
-                            error!("could not get database statistics: {}", e);
-                            continue;
-                        }
+                    }
+
+                    // Get idle backend `state_change` with the max timestamp.
+                    if let Some(last) = idle_backs.iter().max() {
+                        last_active = Some(*last);
                     }
                 }
 
-                // Second, if database statistics is the same, check all backends state change,
-                // maybe there is some with more recent activity. `get_backends_state_change()`
-                // can return None or stale timestamp, so it's `compute.update_last_active()`
-                // responsibility to check if the new timestamp is more recent than the current one.
-                // This helps us to discover new sessions, that did nothing yet.
-                match get_backends_state_change(cli) {
-                    Ok(last_active) => {
-                        compute.update_last_active(last_active);
-                    }
-                    Err(e) => {
-                        error!("could not get backends state change: {}", e);
-                    }
-                }
-
-                // Finally, if there are existing (logical) walsenders, do not suspend.
-                //
-                // walproposer doesn't currently show up in pg_stat_replication,
-                // but protect if it will be
-                let ws_count_query = "select count(*) from pg_stat_replication where application_name != 'walproposer';";
-                match cli.query_one(ws_count_query, &[]) {
-                    Ok(r) => match r.try_get::<&str, i64>("count") {
-                        Ok(num_ws) => {
-                            if num_ws > 0 {
-                                compute.update_last_active(Some(Utc::now()));
-                                continue;
-                            }
-                        }
-                        Err(e) => {
-                            warn!("failed to parse walsenders count: {:?}", e);
-                            continue;
-                        }
-                    },
-                    Err(e) => {
-                        warn!("failed to get list of walsenders: {:?}", e);
-                        continue;
-                    }
-                }
-                //
-                // Don't suspend compute if there is an active logical replication subscription
-                //
-                // `where pid is not null` – to filter out read only computes and subscription on branches
-                //
-                let logical_subscriptions_query =
-                    "select count(*) from pg_stat_subscription where pid is not null;";
-                match cli.query_one(logical_subscriptions_query, &[]) {
-                    Ok(row) => match row.try_get::<&str, i64>("count") {
-                        Ok(num_subscribers) => {
-                            if num_subscribers > 0 {
-                                compute.update_last_active(Some(Utc::now()));
-                                continue;
-                            }
-                        }
-                        Err(e) => {
-                            warn!("failed to parse `pg_stat_subscription` count: {:?}", e);
-                            continue;
-                        }
-                    },
-                    Err(e) => {
-                        warn!(
-                            "failed to get list of active logical replication subscriptions: {:?}",
-                            e
-                        );
-                        continue;
-                    }
-                }
-                //
-                // Do not suspend compute if autovacuum is running
-                //
-                let autovacuum_count_query = "select count(*) from pg_stat_activity where backend_type = 'autovacuum worker'";
-                match cli.query_one(autovacuum_count_query, &[]) {
-                    Ok(r) => match r.try_get::<&str, i64>("count") {
-                        Ok(num_workers) => {
-                            if num_workers > 0 {
-                                compute.update_last_active(Some(Utc::now()));
-                                continue;
-                            }
-                        }
-                        Err(e) => {
-                            warn!("failed to parse autovacuum workers count: {:?}", e);
-                            continue;
-                        }
-                    },
-                    Err(e) => {
-                        warn!("failed to get list of autovacuum workers: {:?}", e);
-                        continue;
-                    }
+                // Update the last activity in the shared state if we got a more recent one.
+                let mut state = compute.state.lock().unwrap();
+                // NB: `Some(<DateTime>)` is always greater than `None`.
+                if last_active > state.last_active {
+                    state.last_active = last_active;
+                    debug!("set the last compute activity time to: {:?}", last_active);
                 }
             }
             Err(e) => {
-                debug!("could not connect to Postgres: {}, retrying", e);
+                debug!("cannot connect to postgres: {}, retrying", e);
 
                 // Establish a new connection and try again.
                 client = Client::connect(connstr, NoTls);
@@ -202,124 +104,11 @@ fn watch_compute_activity(compute: &ComputeNode) {
     }
 }
 
-// Hang on condition variable waiting until the compute status is `Running`.
-fn wait_for_postgres_start(compute: &ComputeNode) {
-    let mut state = compute.state.lock().unwrap();
-    while state.status != ComputeStatus::Running {
-        info!("compute is not running, waiting before monitoring activity");
-        state = compute.state_changed.wait(state).unwrap();
-
-        if state.status == ComputeStatus::Running {
-            break;
-        }
-    }
-}
-
-// Figure out the total active time and sessions across all non-system databases.
-// Returned tuple is `(active_time, sessions)`.
-// It can return `0.0` active time or `0` sessions, which means no user databases exist OR
-// it was a start with skipped `pg_catalog` updates and user didn't do any queries
-// (or open any sessions) yet.
-fn get_database_stats(cli: &mut Client) -> anyhow::Result<(f64, i64)> {
-    // Filter out `postgres` database as `compute_ctl` and other monitoring tools
-    // like `postgres_exporter` use it to query Postgres statistics.
-    // Use explicit 8 bytes type casts to match Rust types.
-    let stats = cli.query_one(
-        "SELECT coalesce(sum(active_time), 0.0)::float8 AS total_active_time,
-            coalesce(sum(sessions), 0)::bigint AS total_sessions
-        FROM pg_stat_database
-        WHERE datname NOT IN (
-                'postgres',
-                'template0',
-                'template1'
-            );",
-        &[],
-    );
-    let stats = match stats {
-        Ok(stats) => stats,
-        Err(e) => {
-            return Err(anyhow::anyhow!("could not query active_time: {}", e));
-        }
-    };
-
-    let active_time: f64 = match stats.try_get("total_active_time") {
-        Ok(active_time) => active_time,
-        Err(e) => return Err(anyhow::anyhow!("could not get total_active_time: {}", e)),
-    };
-
-    let sessions: i64 = match stats.try_get("total_sessions") {
-        Ok(sessions) => sessions,
-        Err(e) => return Err(anyhow::anyhow!("could not get total_sessions: {}", e)),
-    };
-
-    Ok((active_time, sessions))
-}
-
-// Figure out the most recent state change time across all client backends.
-// If there is currently active backend, timestamp will be `Utc::now()`.
-// It can return `None`, which means no client backends exist or we were
-// unable to parse the timestamp.
-fn get_backends_state_change(cli: &mut Client) -> anyhow::Result<Option<DateTime<Utc>>> {
-    let mut last_active: Option<DateTime<Utc>> = None;
-    // Get all running client backends except ourself, use RFC3339 DateTime format.
-    let backends = cli.query(
-        "SELECT state, to_char(state_change, 'YYYY-MM-DD\"T\"HH24:MI:SS.US\"Z\"') AS state_change
-                FROM pg_stat_activity
-                    WHERE backend_type = 'client backend'
-                    AND pid != pg_backend_pid()
-                    AND usename != 'cloud_admin';", // XXX: find a better way to filter other monitors?
-        &[],
-    );
-
-    match backends {
-        Ok(backs) => {
-            let mut idle_backs: Vec<DateTime<Utc>> = vec![];
-
-            for b in backs.into_iter() {
-                let state: String = match b.try_get("state") {
-                    Ok(state) => state,
-                    Err(_) => continue,
-                };
-
-                if state == "idle" {
-                    let change: String = match b.try_get("state_change") {
-                        Ok(state_change) => state_change,
-                        Err(_) => continue,
-                    };
-                    let change = DateTime::parse_from_rfc3339(&change);
-                    match change {
-                        Ok(t) => idle_backs.push(t.with_timezone(&Utc)),
-                        Err(e) => {
-                            info!("cannot parse backend state_change DateTime: {}", e);
-                            continue;
-                        }
-                    }
-                } else {
-                    // Found non-idle backend, so the last activity is NOW.
-                    // Return immediately, no need to check other backends.
-                    return Ok(Some(Utc::now()));
-                }
-            }
-
-            // Get idle backend `state_change` with the max timestamp.
-            if let Some(last) = idle_backs.iter().max() {
-                last_active = Some(*last);
-            }
-        }
-        Err(e) => {
-            return Err(anyhow::anyhow!("could not query backends: {}", e));
-        }
-    }
-
-    Ok(last_active)
-}
-
 /// Launch a separate compute monitor thread and return its `JoinHandle`.
-pub fn launch_monitor(compute: &Arc<ComputeNode>) -> thread::JoinHandle<()> {
-    let compute = Arc::clone(compute);
+pub fn launch_monitor(state: &Arc<ComputeNode>) -> Result<thread::JoinHandle<()>> {
+    let state = Arc::clone(state);
 
-    thread::Builder::new()
+    Ok(thread::Builder::new()
         .name("compute-monitor".into())
-        .spawn(move || watch_compute_activity(&compute))
-        .expect("cannot launch compute monitor thread")
+        .spawn(move || watch_compute_activity(&state))?)
 }

compute_tools/src/params.rs

@@ -6,4 +6,4 @@ pub const DEFAULT_LOG_LEVEL: &str = "info";
 //   https://www.postgresql.org/docs/15/auth-password.html
 //
 // So it's safe to set md5 here, as `control-plane` anyway uses SCRAM for all roles.
-pub const PG_HBA_ALL_MD5: &str = "host\tall\t\tall\t\tall\t\tmd5";
+pub const PG_HBA_ALL_MD5: &str = "host\tall\t\tall\t\t0.0.0.0/0\t\tmd5";

compute_tools/src/pg_helpers.rs

@@ -1,4 +1,3 @@
-use std::collections::HashMap;
 use std::fmt::Write;
 use std::fs;
 use std::fs::File;
@@ -6,46 +5,29 @@ use std::io::{BufRead, BufReader};
 use std::os::unix::fs::PermissionsExt;
 use std::path::Path;
 use std::process::Child;
-use std::thread::JoinHandle;
 use std::time::{Duration, Instant};
 
 use anyhow::{bail, Result};
-use ini::Ini;
 use notify::{RecursiveMode, Watcher};
 use postgres::{Client, Transaction};
-use tokio::io::AsyncBufReadExt;
-use tokio::time::timeout;
-use tokio_postgres::NoTls;
-use tracing::{debug, error, info, instrument};
+use tracing::{debug, instrument};
 
 use compute_api::spec::{Database, GenericOption, GenericOptions, PgIdent, Role};
 
 const POSTGRES_WAIT_TIMEOUT: Duration = Duration::from_millis(60 * 1000); // milliseconds
 
-/// Escape a string for including it in a SQL literal.
-///
-/// Wrapping the result with `E'{}'` or `'{}'` is not required,
-/// as it returns a ready-to-use SQL string literal, e.g. `'db'''` or `E'db\\'`.
-/// See <https://github.com/postgres/postgres/blob/da98d005cdbcd45af563d0c4ac86d0e9772cd15f/src/backend/utils/adt/quote.c#L47>
-/// for the original implementation.
-pub fn escape_literal(s: &str) -> String {
-    let res = s.replace('\'', "''").replace('\\', "\\\\");
-
-    if res.contains('\\') {
-        format!("E'{}'", res)
-    } else {
-        format!("'{}'", res)
-    }
+/// Escape a string for including it in a SQL literal
+fn escape_literal(s: &str) -> String {
+    s.replace('\'', "''").replace('\\', "\\\\")
 }
 
-/// Escape a string so that it can be used in postgresql.conf. Wrapping the result
-/// with `'{}'` is not required, as it returns a ready-to-use config string.
+/// Escape a string so that it can be used in postgresql.conf.
+/// Same as escape_literal, currently.
 pub fn escape_conf_value(s: &str) -> String {
-    let res = s.replace('\'', "''").replace('\\', "\\\\");
-    format!("'{}'", res)
+    s.replace('\'', "''").replace('\\', "\\\\")
 }
 
-pub trait GenericOptionExt {
+trait GenericOptionExt {
     fn to_pg_option(&self) -> String;
     fn to_pg_setting(&self) -> String;
 }
@@ -55,7 +37,7 @@ impl GenericOptionExt for GenericOption {
     fn to_pg_option(&self) -> String {
         if let Some(val) = &self.value {
             match self.vartype.as_ref() {
-                "string" => format!("{} {}", self.name, escape_literal(val)),
+                "string" => format!("{} '{}'", self.name, escape_literal(val)),
                 _ => format!("{} {}", self.name, val),
             }
         } else {
@@ -67,7 +49,7 @@ impl GenericOptionExt for GenericOption {
     fn to_pg_setting(&self) -> String {
         if let Some(val) = &self.value {
             match self.vartype.as_ref() {
-                "string" => format!("{} = {}", self.name, escape_conf_value(val)),
+                "string" => format!("{} = '{}'", self.name, escape_conf_value(val)),
                 _ => format!("{} = {}", self.name, val),
             }
         } else {
@@ -212,43 +194,28 @@ pub fn get_existing_roles(xact: &mut Transaction<'_>) -> Result<Vec<Role>> {
 }
 
 /// Build a list of existing Postgres databases
-pub fn get_existing_dbs(client: &mut Client) -> Result<HashMap<String, Database>> {
-    // `pg_database.datconnlimit = -2` means that the database is in the
-    // invalid state. See:
-    //   https://github.com/postgres/postgres/commit/a4b4cc1d60f7e8ccfcc8ff8cb80c28ee411ad9a9
-    let postgres_dbs: Vec<Database> = client
+pub fn get_existing_dbs(client: &mut Client) -> Result<Vec<Database>> {
+    let postgres_dbs = client
         .query(
-            "SELECT
-                datname AS name,
-                datdba::regrole::text AS owner,
-                NOT datallowconn AS restrict_conn,
-                datconnlimit = - 2 AS invalid
-            FROM
-                pg_catalog.pg_database;",
+            "SELECT datname, datdba::regrole::text as owner
+               FROM pg_catalog.pg_database;",
             &[],
         )?
         .iter()
         .map(|row| Database {
-            name: row.get("name"),
+            name: row.get("datname"),
             owner: row.get("owner"),
-            restrict_conn: row.get("restrict_conn"),
-            invalid: row.get("invalid"),
             options: None,
         })
         .collect();
 
-    let dbs_map = postgres_dbs
-        .iter()
-        .map(|db| (db.name.clone(), db.clone()))
-        .collect::<HashMap<_, _>>();
-
-    Ok(dbs_map)
+    Ok(postgres_dbs)
 }
 
 /// Wait for Postgres to become ready to accept connections. It's ready to
 /// accept connections when the state-field in `pgdata/postmaster.pid` says
 /// 'ready'.
-#[instrument(skip_all, fields(pgdata = %pgdata.display()))]
+#[instrument(skip(pg))]
 pub fn wait_for_postgres(pg: &mut Child, pgdata: &Path) -> Result<()> {
     let pid_path = pgdata.join("postmaster.pid");
 
@@ -265,10 +232,9 @@ pub fn wait_for_postgres(pg: &mut Child, pgdata: &Path) -> Result<()> {
     // case we miss some events for some reason. Not strictly necessary, but
     // better safe than sorry.
     let (tx, rx) = std::sync::mpsc::channel();
-    let watcher_res = notify::recommended_watcher(move |res| {
+    let (mut watcher, rx): (Box<dyn Watcher>, _) = match notify::recommended_watcher(move |res| {
         let _ = tx.send(res);
-    });
-    let (mut watcher, rx): (Box<dyn Watcher>, _) = match watcher_res {
+    }) {
         Ok(watcher) => (Box::new(watcher), rx),
         Err(e) => {
             match e.kind {
@@ -366,172 +332,3 @@ pub fn create_pgdata(pgdata: &str) -> Result<()> {
 
     Ok(())
 }
-
-/// Update pgbouncer.ini with provided options
-fn update_pgbouncer_ini(
-    pgbouncer_config: HashMap<String, String>,
-    pgbouncer_ini_path: &str,
-) -> Result<()> {
-    let mut conf = Ini::load_from_file(pgbouncer_ini_path)?;
-    let section = conf.section_mut(Some("pgbouncer")).unwrap();
-
-    for (option_name, value) in pgbouncer_config.iter() {
-        section.insert(option_name, value);
-        debug!(
-            "Updating pgbouncer.ini with new values {}={}",
-            option_name, value
-        );
-    }
-
-    conf.write_to_file(pgbouncer_ini_path)?;
-    Ok(())
-}
-
-/// Tune pgbouncer.
-/// 1. Apply new config using pgbouncer admin console
-/// 2. Add new values to pgbouncer.ini to preserve them after restart
-pub async fn tune_pgbouncer(pgbouncer_config: HashMap<String, String>) -> Result<()> {
-    let pgbouncer_connstr = if std::env::var_os("AUTOSCALING").is_some() {
-        // for VMs use pgbouncer specific way to connect to
-        // pgbouncer admin console without password
-        // when pgbouncer is running under the same user.
-        "host=/tmp port=6432 dbname=pgbouncer user=pgbouncer".to_string()
-    } else {
-        // for k8s use normal connection string with password
-        // to connect to pgbouncer admin console
-        let mut pgbouncer_connstr =
-            "host=localhost port=6432 dbname=pgbouncer user=postgres sslmode=disable".to_string();
-        if let Ok(pass) = std::env::var("PGBOUNCER_PASSWORD") {
-            pgbouncer_connstr.push_str(format!(" password={}", pass).as_str());
-        }
-        pgbouncer_connstr
-    };
-
-    info!(
-        "Connecting to pgbouncer with connection string: {}",
-        pgbouncer_connstr
-    );
-
-    // connect to pgbouncer, retrying several times
-    // because pgbouncer may not be ready yet
-    let mut retries = 3;
-    let client = loop {
-        match tokio_postgres::connect(&pgbouncer_connstr, NoTls).await {
-            Ok((client, connection)) => {
-                tokio::spawn(async move {
-                    if let Err(e) = connection.await {
-                        eprintln!("connection error: {}", e);
-                    }
-                });
-                break client;
-            }
-            Err(e) => {
-                if retries == 0 {
-                    return Err(e.into());
-                }
-                error!("Failed to connect to pgbouncer: pgbouncer_connstr {}", e);
-                retries -= 1;
-                tokio::time::sleep(Duration::from_secs(1)).await;
-            }
-        }
-    };
-
-    // Apply new config
-    for (option_name, value) in pgbouncer_config.iter() {
-        let query = format!("SET {}={}", option_name, value);
-        // keep this log line for debugging purposes
-        info!("Applying pgbouncer setting change: {}", query);
-
-        if let Err(err) = client.simple_query(&query).await {
-            // Don't fail on error, just print it into log
-            error!(
-                "Failed to apply pgbouncer setting change: {},  {}",
-                query, err
-            );
-        };
-    }
-
-    // save values to pgbouncer.ini
-    // so that they are preserved after pgbouncer restart
-    let pgbouncer_ini_path = if std::env::var_os("AUTOSCALING").is_some() {
-        // in VMs we use /etc/pgbouncer.ini
-        "/etc/pgbouncer.ini".to_string()
-    } else {
-        // in pods we use /var/db/postgres/pgbouncer/pgbouncer.ini
-        // this is a shared volume between pgbouncer and postgres containers
-        // FIXME: fix permissions for this file
-        "/var/db/postgres/pgbouncer/pgbouncer.ini".to_string()
-    };
-    update_pgbouncer_ini(pgbouncer_config, &pgbouncer_ini_path)?;
-
-    Ok(())
-}
-
-/// Spawn a thread that will read Postgres logs from `stderr`, join multiline logs
-/// and send them to the logger. In the future we may also want to add context to
-/// these logs.
-pub fn handle_postgres_logs(stderr: std::process::ChildStderr) -> JoinHandle<()> {
-    std::thread::spawn(move || {
-        let runtime = tokio::runtime::Builder::new_current_thread()
-            .enable_all()
-            .build()
-            .expect("failed to build tokio runtime");
-
-        let res = runtime.block_on(async move {
-            let stderr = tokio::process::ChildStderr::from_std(stderr)?;
-            handle_postgres_logs_async(stderr).await
-        });
-        if let Err(e) = res {
-            tracing::error!("error while processing postgres logs: {}", e);
-        }
-    })
-}
-
-/// Read Postgres logs from `stderr` until EOF. Buffer is flushed on one of the following conditions:
-/// - next line starts with timestamp
-/// - EOF
-/// - no new lines were written for the last 100 milliseconds
-async fn handle_postgres_logs_async(stderr: tokio::process::ChildStderr) -> Result<()> {
-    let mut lines = tokio::io::BufReader::new(stderr).lines();
-    let timeout_duration = Duration::from_millis(100);
-    let ts_regex =
-        regex::Regex::new(r"^\d+-\d{2}-\d{2} \d{2}:\d{2}:\d{2}").expect("regex is valid");
-
-    let mut buf = vec![];
-    loop {
-        let next_line = timeout(timeout_duration, lines.next_line()).await;
-
-        // we should flush lines from the buffer if we cannot continue reading multiline message
-        let should_flush_buf = match next_line {
-            // Flushing if new line starts with timestamp
-            Ok(Ok(Some(ref line))) => ts_regex.is_match(line),
-            // Flushing on EOF, timeout or error
-            _ => true,
-        };
-
-        if !buf.is_empty() && should_flush_buf {
-            // join multiline message into a single line, separated by unicode Zero Width Space.
-            // "PG:" suffix is used to distinguish postgres logs from other logs.
-            let combined = format!("PG:{}\n", buf.join("\u{200B}"));
-            buf.clear();
-
-            // sync write to stderr to avoid interleaving with other logs
-            use std::io::Write;
-            let res = std::io::stderr().lock().write_all(combined.as_bytes());
-            if let Err(e) = res {
-                tracing::error!("error while writing to stderr: {}", e);
-            }
-        }
-
-        // if not timeout, append line to the buffer
-        if next_line.is_ok() {
-            match next_line?? {
-                Some(line) => buf.push(line),
-                // EOF
-                None => break,
-            };
-        }
-    }
-
-    Ok(())
-}

compute_tools/src/spec.rs

@@ -2,20 +2,18 @@ use std::fs::File;
 use std::path::Path;
 use std::str::FromStr;
 
-use anyhow::{anyhow, bail, Context, Result};
+use anyhow::{anyhow, bail, Result};
 use postgres::config::Config;
 use postgres::{Client, NoTls};
 use reqwest::StatusCode;
 use tracing::{error, info, info_span, instrument, span_enabled, warn, Level};
 
 use crate::config;
-use crate::logger::inlinify;
-use crate::migration::MigrationRunner;
 use crate::params::PG_HBA_ALL_MD5;
 use crate::pg_helpers::*;
 
 use compute_api::responses::{ControlPlaneComputeStatus, ControlPlaneSpecResponse};
-use compute_api::spec::{ComputeSpec, PgIdent, Role};
+use compute_api::spec::{ComputeSpec, Database, PgIdent, Role};
 
 // Do control plane request and return response if any. In case of error it
 // returns a bool flag indicating whether it makes sense to retry the request
@@ -26,7 +24,7 @@ fn do_control_plane_request(
 ) -> Result<ControlPlaneSpecResponse, (bool, String)> {
     let resp = reqwest::blocking::Client::new()
         .get(uri)
-        .header("Authorization", format!("Bearer {}", jwt))
+        .header("Authorization", jwt)
         .send()
         .map_err(|e| {
             (
@@ -70,7 +68,7 @@ pub fn get_spec_from_control_plane(
     base_uri: &str,
     compute_id: &str,
 ) -> Result<Option<ComputeSpec>> {
-    let cp_uri = format!("{base_uri}/compute/api/v2/computes/{compute_id}/spec");
+    let cp_uri = format!("{base_uri}/management/api/v2/computes/{compute_id}/spec");
     let jwt: String = match std::env::var("NEON_CONTROL_PLANE_TOKEN") {
         Ok(v) => v,
         Err(_) => "".to_string(),
@@ -120,6 +118,19 @@ pub fn get_spec_from_control_plane(
     spec
 }
 
+/// It takes cluster specification and does the following:
+/// - Serialize cluster config and put it into `postgresql.conf` completely rewriting the file.
+/// - Update `pg_hba.conf` to allow external connections.
+pub fn handle_configuration(spec: &ComputeSpec, pgdata_path: &Path) -> Result<()> {
+    // File `postgresql.conf` is no longer included into `basebackup`, so just
+    // always write all config into it creating new file.
+    config::write_postgres_conf(&pgdata_path.join("postgresql.conf"), spec)?;
+
+    update_pg_hba(pgdata_path)?;
+
+    Ok(())
+}
+
 /// Check `pg_hba.conf` and update if needed to allow external connections.
 pub fn update_pg_hba(pgdata_path: &Path) -> Result<()> {
     // XXX: consider making it a part of spec.json
@@ -150,38 +161,6 @@ pub fn add_standby_signal(pgdata_path: &Path) -> Result<()> {
     Ok(())
 }
 
-/// Compute could be unexpectedly shut down, for example, during the
-/// database dropping. This leaves the database in the invalid state,
-/// which prevents new db creation with the same name. This function
-/// will clean it up before proceeding with catalog updates. All
-/// possible future cleanup operations may go here too.
-#[instrument(skip_all)]
-pub fn cleanup_instance(client: &mut Client) -> Result<()> {
-    let existing_dbs = get_existing_dbs(client)?;
-
-    for (_, db) in existing_dbs {
-        if db.invalid {
-            // After recent commit in Postgres, interrupted DROP DATABASE
-            // leaves the database in the invalid state. According to the
-            // commit message, the only option for user is to drop it again.
-            // See:
-            //   https://github.com/postgres/postgres/commit/a4b4cc1d60f7e8ccfcc8ff8cb80c28ee411ad9a9
-            //
-            // Postgres Neon extension is done the way, that db is de-registered
-            // in the control plane metadata only after it is dropped. So there is
-            // a chance that it still thinks that db should exist. This means
-            // that it will be re-created by `handle_databases()`. Yet, it's fine
-            // as user can just repeat drop (in vanilla Postgres they would need
-            // to do the same, btw).
-            let query = format!("DROP DATABASE IF EXISTS {}", db.name.pg_quote());
-            info!("dropping invalid database {}", db.name);
-            client.execute(query.as_str(), &[])?;
-        }
-    }
-
-    Ok(())
-}
-
 /// Given a cluster spec json and open transaction it handles roles creation,
 /// deletion and update.
 #[instrument(skip_all)]
@@ -191,20 +170,18 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
 
     // Print a list of existing Postgres roles (only in debug mode)
     if span_enabled!(Level::INFO) {
-        let mut vec = Vec::new();
+        info!("postgres roles:");
         for r in &existing_roles {
-            vec.push(format!(
-                "{}:{}",
+            info!(
+                "    - {}:{}",
                 r.name,
                 if r.encrypted_password.is_some() {
                     "[FILTERED]"
                 } else {
                     "(null)"
                 }
-            ));
+            );
         }
-
-        info!("postgres roles (total {}): {:?}", vec.len(), vec);
     }
 
     // Process delta operations first
@@ -242,10 +219,7 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
     // Refresh Postgres roles info to handle possible roles renaming
     let existing_roles: Vec<Role> = get_existing_roles(&mut xact)?;
 
-    info!(
-        "handling cluster spec roles (total {})",
-        spec.cluster.roles.len()
-    );
+    info!("cluster spec roles:");
     for role in &spec.cluster.roles {
         let name = &role.name;
         // XXX: with a limited number of roles it is fine, but consider making it a HashMap
@@ -290,27 +264,22 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
         match action {
             RoleAction::None => {}
             RoleAction::Update => {
-                // This can be run on /every/ role! Not just ones created through the console.
-                // This means that if you add some funny ALTER here that adds a permission,
-                // this will get run even on user-created roles! This will result in different
-                // behavior before and after a spec gets reapplied. The below ALTER as it stands
-                // now only grants LOGIN and changes the password. Please do not allow this branch
-                // to do anything silly.
                 let mut query: String = format!("ALTER ROLE {} ", name.pg_quote());
                 query.push_str(&role.to_pg_options());
                 xact.execute(query.as_str(), &[])?;
             }
             RoleAction::Create => {
-                // This branch only runs when roles are created through the console, so it is
-                // safe to add more permissions here. BYPASSRLS and REPLICATION are inherited
-                // from neon_superuser.
-                let mut query: String = format!(
-                    "CREATE ROLE {} INHERIT CREATEROLE CREATEDB BYPASSRLS REPLICATION IN ROLE neon_superuser",
-                    name.pg_quote()
-                );
-                info!("running role create query: '{}'", &query);
+                let mut query: String = format!("CREATE ROLE {} ", name.pg_quote());
+                info!("role create query: '{}'", &query);
                 query.push_str(&role.to_pg_options());
                 xact.execute(query.as_str(), &[])?;
+
+                let grant_query = format!(
+                    "GRANT pg_read_all_data, pg_write_all_data TO {}",
+                    name.pg_quote()
+                );
+                xact.execute(grant_query.as_str(), &[])?;
+                info!("role grant query: '{}'", &grant_query);
             }
         }
 
@@ -325,7 +294,7 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                 RoleAction::Create => " -> create",
                 RoleAction::Update => " -> update",
             };
-            info!(" - {}:{}{}", name, pwd, action_str);
+            info!("   - {}:{}{}", name, pwd, action_str);
         }
     }
 
@@ -377,49 +346,33 @@ pub fn handle_role_deletions(spec: &ComputeSpec, connstr: &str, client: &mut Cli
     Ok(())
 }
 
-fn reassign_owned_objects_in_one_db(
-    conf: Config,
-    role_name: &PgIdent,
-    db_owner: &PgIdent,
-) -> Result<()> {
-    let mut client = conf.connect(NoTls)?;
-
-    // This will reassign all dependent objects to the db owner
-    let reassign_query = format!(
-        "REASSIGN OWNED BY {} TO {}",
-        role_name.pg_quote(),
-        db_owner.pg_quote()
-    );
-    info!(
-        "reassigning objects owned by '{}' in db '{}' to '{}'",
-        role_name,
-        conf.get_dbname().unwrap_or(""),
-        db_owner
-    );
-    client.simple_query(&reassign_query)?;
-
-    // This now will only drop privileges of the role
-    let drop_query = format!("DROP OWNED BY {}", role_name.pg_quote());
-    client.simple_query(&drop_query)?;
-    Ok(())
-}
-
 // Reassign all owned objects in all databases to the owner of the database.
 fn reassign_owned_objects(spec: &ComputeSpec, connstr: &str, role_name: &PgIdent) -> Result<()> {
     for db in &spec.cluster.databases {
         if db.owner != *role_name {
             let mut conf = Config::from_str(connstr)?;
             conf.dbname(&db.name);
-            reassign_owned_objects_in_one_db(conf, role_name, &db.owner)?;
+
+            let mut client = conf.connect(NoTls)?;
+
+            // This will reassign all dependent objects to the db owner
+            let reassign_query = format!(
+                "REASSIGN OWNED BY {} TO {}",
+                role_name.pg_quote(),
+                db.owner.pg_quote()
+            );
+            info!(
+                "reassigning objects owned by '{}' in db '{}' to '{}'",
+                role_name, &db.name, &db.owner
+            );
+            client.simple_query(&reassign_query)?;
+
+            // This now will only drop privileges of the role
+            let drop_query = format!("DROP OWNED BY {}", role_name.pg_quote());
+            client.simple_query(&drop_query)?;
         }
     }
 
-    // Also handle case when there are no databases in the spec.
-    // In this case we need to reassign objects in the default database.
-    let conf = Config::from_str(connstr)?;
-    let db_owner = PgIdent::from_str("cloud_admin")?;
-    reassign_owned_objects_in_one_db(conf, role_name, &db_owner)?;
-
     Ok(())
 }
 
@@ -430,15 +383,14 @@ fn reassign_owned_objects(spec: &ComputeSpec, connstr: &str, role_name: &PgIdent
 /// which together provide us idempotency.
 #[instrument(skip_all)]
 pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
-    let existing_dbs = get_existing_dbs(client)?;
+    let existing_dbs: Vec<Database> = get_existing_dbs(client)?;
 
     // Print a list of existing Postgres databases (only in debug mode)
     if span_enabled!(Level::INFO) {
-        let mut vec = Vec::new();
-        for (dbname, db) in &existing_dbs {
-            vec.push(format!("{}:{}", dbname, db.owner));
+        info!("postgres databases:");
+        for r in &existing_dbs {
+            info!("    {}:{}", r.name, r.owner);
         }
-        info!("postgres databases (total {}): {:?}", vec.len(), vec);
     }
 
     // Process delta operations first
@@ -449,49 +401,16 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                 // We do not check either DB exists or not,
                 // Postgres will take care of it for us
                 "delete_db" => {
-                    // In Postgres we can't drop a database if it is a template.
-                    // So we need to unset the template flag first, but it could
-                    // be a retry, so we could've already dropped the database.
-                    // Check that database exists first to make it idempotent.
-                    let unset_template_query: String = format!(
-                        "
-                        DO $$
-                        BEGIN
-                            IF EXISTS(
-                                SELECT 1
-                                FROM pg_catalog.pg_database
-                                WHERE datname = {}
-                            )
-                            THEN
-                            ALTER DATABASE {} is_template false;
-                            END IF;
-                        END
-                        $$;",
-                        escape_literal(&op.name),
-                        &op.name.pg_quote()
-                    );
-                    // Use FORCE to drop database even if there are active connections.
-                    // We run this from `cloud_admin`, so it should have enough privileges.
-                    // NB: there could be other db states, which prevent us from dropping
-                    // the database. For example, if db is used by any active subscription
-                    // or replication slot.
-                    // TODO: deal with it once we allow logical replication. Proper fix should
-                    // involve returning an error code to the control plane, so it could
-                    // figure out that this is a non-retryable error, return it to the user
-                    // and fail operation permanently.
-                    let drop_db_query: String = format!(
-                        "DROP DATABASE IF EXISTS {} WITH (FORCE)",
-                        &op.name.pg_quote()
-                    );
+                    let query: String = format!("DROP DATABASE IF EXISTS {}", &op.name.pg_quote());
 
                     warn!("deleting database '{}'", &op.name);
-                    client.execute(unset_template_query.as_str(), &[])?;
-                    client.execute(drop_db_query.as_str(), &[])?;
+                    client.execute(query.as_str(), &[])?;
                 }
                 "rename_db" => {
                     let new_name = op.new_name.as_ref().unwrap();
 
-                    if existing_dbs.contains_key(&op.name) {
+                    // XXX: with a limited number of roles it is fine, but consider making it a HashMap
+                    if existing_dbs.iter().any(|r| r.name == op.name) {
                         let query: String = format!(
                             "ALTER DATABASE {} RENAME TO {}",
                             op.name.pg_quote(),
@@ -508,15 +427,14 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
     }
 
     // Refresh Postgres databases info to handle possible renames
-    let existing_dbs = get_existing_dbs(client)?;
+    let existing_dbs: Vec<Database> = get_existing_dbs(client)?;
 
-    info!(
-        "handling cluster spec databases (total {})",
-        spec.cluster.databases.len()
-    );
+    info!("cluster spec databases:");
     for db in &spec.cluster.databases {
         let name = &db.name;
-        let pg_db = existing_dbs.get(name);
+
+        // XXX: with a limited number of databases it is fine, but consider making it a HashMap
+        let pg_db = existing_dbs.iter().find(|r| r.name == *name);
 
         enum DatabaseAction {
             None,
@@ -558,11 +476,6 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                 query.push_str(&db.to_pg_options());
                 let _guard = info_span!("executing", query).entered();
                 client.execute(query.as_str(), &[])?;
-                let grant_query: String = format!(
-                    "GRANT ALL PRIVILEGES ON DATABASE {} TO neon_superuser",
-                    name.pg_quote()
-                );
-                client.execute(grant_query.as_str(), &[])?;
             }
         };
 
@@ -572,7 +485,7 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                 DatabaseAction::Create => " -> create",
                 DatabaseAction::Update => " -> update",
             };
-            info!(" - {}:{}{}", db.name, db.owner, action_str);
+            info!("   - {}:{}{}", db.name, db.owner, action_str);
         }
     }
 
@@ -582,37 +495,39 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
 /// Grant CREATE ON DATABASE to the database owner and do some other alters and grants
 /// to allow users creating trusted extensions and re-creating `public` schema, for example.
 #[instrument(skip_all)]
-pub fn handle_grants(
-    spec: &ComputeSpec,
-    client: &mut Client,
-    connstr: &str,
-    enable_anon_extension: bool,
-) -> Result<()> {
-    info!("modifying database permissions");
-    let existing_dbs = get_existing_dbs(client)?;
+pub fn handle_grants(spec: &ComputeSpec, connstr: &str, client: &mut Client) -> Result<()> {
+    info!("cluster spec grants:");
+
+    // We now have a separate `web_access` role to connect to the database
+    // via the web interface and proxy link auth. And also we grant a
+    // read / write all data privilege to every role. So also grant
+    // create to everyone.
+    // XXX: later we should stop messing with Postgres ACL in such horrible
+    // ways.
+    let roles = spec
+        .cluster
+        .roles
+        .iter()
+        .map(|r| r.name.pg_quote())
+        .collect::<Vec<_>>();
+
+    for db in &spec.cluster.databases {
+        let dbname = &db.name;
+
+        let query: String = format!(
+            "GRANT CREATE ON DATABASE {} TO {}",
+            dbname.pg_quote(),
+            roles.join(", ")
+        );
+        info!("grant query {}", &query);
+
+        client.execute(query.as_str(), &[])?;
+    }
 
     // Do some per-database access adjustments. We'd better do this at db creation time,
     // but CREATE DATABASE isn't transactional. So we cannot create db + do some grants
     // atomically.
     for db in &spec.cluster.databases {
-        match existing_dbs.get(&db.name) {
-            Some(pg_db) => {
-                if pg_db.restrict_conn || pg_db.invalid {
-                    info!(
-                        "skipping grants for db {} (invalid: {}, connections not allowed: {})",
-                        db.name, pg_db.invalid, pg_db.restrict_conn
-                    );
-                    continue;
-                }
-            }
-            None => {
-                bail!(
-                    "database {} doesn't exist in Postgres after handle_databases()",
-                    db.name
-                );
-            }
-        }
-
         let mut conf = Config::from_str(connstr)?;
         conf.dbname(&db.name);
 
@@ -651,14 +566,6 @@ pub fn handle_grants(
 
         // Explicitly grant CREATE ON SCHEMA PUBLIC to the web_access user.
         // This is needed because since postgres 15 this privilege is removed by default.
-        // TODO: web_access isn't created for almost 1 year. It could be that we have
-        // active users of 1 year old projects, but hopefully not, so check it and
-        // remove this code if possible. The worst thing that could happen is that
-        // user won't be able to use public schema in NEW databases created in the
-        // very OLD project.
-        //
-        // Also, alter default permissions so that relations created by extensions can be
-        // used by neon_superuser without permission issues.
         let grant_query = "DO $$\n\
                 BEGIN\n\
                     IF EXISTS(\n\
@@ -677,31 +584,12 @@ pub fn handle_grants(
                             GRANT CREATE ON SCHEMA public TO web_access;\n\
                         END IF;\n\
                     END IF;\n\
-                    IF EXISTS(\n\
-                        SELECT nspname\n\
-                        FROM pg_catalog.pg_namespace\n\
-                        WHERE nspname = 'public'\n\
-                    )\n\
-                    THEN\n\
-                        ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT ALL ON TABLES TO neon_superuser WITH GRANT OPTION;\n\
-                        ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT ALL ON SEQUENCES TO neon_superuser WITH GRANT OPTION;\n\
-                    END IF;\n\
                 END\n\
             $$;"
         .to_string();
 
-        info!(
-            "grant query for db {} : {}",
-            &db.name,
-            inlinify(&grant_query)
-        );
+        info!("grant query for db {} : {}", &db.name, &grant_query);
         db_client.simple_query(&grant_query)?;
-
-        // it is important to run this after all grants
-        if enable_anon_extension {
-            handle_extension_anon(spec, &db.owner, &mut db_client, false)
-                .context("handle_grants handle_extension_anon")?;
-        }
     }
 
     Ok(())
@@ -721,203 +609,3 @@ pub fn handle_extensions(spec: &ComputeSpec, client: &mut Client) -> Result<()>
 
     Ok(())
 }
-
-/// Run CREATE and ALTER EXTENSION neon UPDATE for postgres database
-#[instrument(skip_all)]
-pub fn handle_extension_neon(client: &mut Client) -> Result<()> {
-    info!("handle extension neon");
-
-    let mut query = "CREATE SCHEMA IF NOT EXISTS neon";
-    client.simple_query(query)?;
-
-    query = "CREATE EXTENSION IF NOT EXISTS neon WITH SCHEMA neon";
-    info!("create neon extension with query: {}", query);
-    client.simple_query(query)?;
-
-    query = "UPDATE pg_extension SET extrelocatable = true WHERE extname = 'neon'";
-    client.simple_query(query)?;
-
-    query = "ALTER EXTENSION neon SET SCHEMA neon";
-    info!("alter neon extension schema with query: {}", query);
-    client.simple_query(query)?;
-
-    // this will be a no-op if extension is already up to date,
-    // which may happen in two cases:
-    // - extension was just installed
-    // - extension was already installed and is up to date
-    let query = "ALTER EXTENSION neon UPDATE";
-    info!("update neon extension version with query: {}", query);
-    if let Err(e) = client.simple_query(query) {
-        error!(
-            "failed to upgrade neon extension during `handle_extension_neon`: {}",
-            e
-        );
-    }
-
-    Ok(())
-}
-
-#[instrument(skip_all)]
-pub fn handle_neon_extension_upgrade(client: &mut Client) -> Result<()> {
-    info!("handle neon extension upgrade");
-    let query = "ALTER EXTENSION neon UPDATE";
-    info!("update neon extension version with query: {}", query);
-    client.simple_query(query)?;
-
-    Ok(())
-}
-
-#[instrument(skip_all)]
-pub fn handle_migrations(client: &mut Client) -> Result<()> {
-    info!("handle migrations");
-
-    // !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-    // !BE SURE TO ONLY ADD MIGRATIONS TO THE END OF THIS ARRAY. IF YOU DO NOT, VERY VERY BAD THINGS MAY HAPPEN!
-    // !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-    // Add new migrations in numerical order.
-    let migrations = [
-        include_str!("./migrations/0001-neon_superuser_bypass_rls.sql"),
-        include_str!("./migrations/0002-alter_roles.sql"),
-        include_str!("./migrations/0003-grant_pg_create_subscription_to_neon_superuser.sql"),
-        include_str!("./migrations/0004-grant_pg_monitor_to_neon_superuser.sql"),
-        include_str!("./migrations/0005-grant_all_on_tables_to_neon_superuser.sql"),
-        include_str!("./migrations/0006-grant_all_on_sequences_to_neon_superuser.sql"),
-        include_str!(
-            "./migrations/0007-grant_all_on_tables_to_neon_superuser_with_grant_option.sql"
-        ),
-        include_str!(
-            "./migrations/0008-grant_all_on_sequences_to_neon_superuser_with_grant_option.sql"
-        ),
-        include_str!("./migrations/0009-revoke_replication_for_previously_allowed_roles.sql"),
-        include_str!(
-            "./migrations/0010-grant_snapshot_synchronization_funcs_to_neon_superuser.sql"
-        ),
-        include_str!(
-            "./migrations/0011-grant_pg_show_replication_origin_status_to_neon_superuser.sql"
-        ),
-    ];
-
-    MigrationRunner::new(client, &migrations).run_migrations()?;
-
-    Ok(())
-}
-
-/// Connect to the database as superuser and pre-create anon extension
-/// if it is present in shared_preload_libraries
-#[instrument(skip_all)]
-pub fn handle_extension_anon(
-    spec: &ComputeSpec,
-    db_owner: &str,
-    db_client: &mut Client,
-    grants_only: bool,
-) -> Result<()> {
-    info!("handle extension anon");
-
-    if let Some(libs) = spec.cluster.settings.find("shared_preload_libraries") {
-        if libs.contains("anon") {
-            if !grants_only {
-                // check if extension is already initialized using anon.is_initialized()
-                let query = "SELECT anon.is_initialized()";
-                match db_client.query(query, &[]) {
-                    Ok(rows) => {
-                        if !rows.is_empty() {
-                            let is_initialized: bool = rows[0].get(0);
-                            if is_initialized {
-                                info!("anon extension is already initialized");
-                                return Ok(());
-                            }
-                        }
-                    }
-                    Err(e) => {
-                        warn!(
-                            "anon extension is_installed check failed with expected error: {}",
-                            e
-                        );
-                    }
-                };
-
-                // Create anon extension if this compute needs it
-                // Users cannot create it themselves, because superuser is required.
-                let mut query = "CREATE EXTENSION IF NOT EXISTS anon CASCADE";
-                info!("creating anon extension with query: {}", query);
-                match db_client.query(query, &[]) {
-                    Ok(_) => {}
-                    Err(e) => {
-                        error!("anon extension creation failed with error: {}", e);
-                        return Ok(());
-                    }
-                }
-
-                // check that extension is installed
-                query = "SELECT extname FROM pg_extension WHERE extname = 'anon'";
-                let rows = db_client.query(query, &[])?;
-                if rows.is_empty() {
-                    error!("anon extension is not installed");
-                    return Ok(());
-                }
-
-                // Initialize anon extension
-                // This also requires superuser privileges, so users cannot do it themselves.
-                query = "SELECT anon.init()";
-                match db_client.query(query, &[]) {
-                    Ok(_) => {}
-                    Err(e) => {
-                        error!("anon.init() failed with error: {}", e);
-                        return Ok(());
-                    }
-                }
-            }
-
-            // check that extension is installed, if not bail early
-            let query = "SELECT extname FROM pg_extension WHERE extname = 'anon'";
-            match db_client.query(query, &[]) {
-                Ok(rows) => {
-                    if rows.is_empty() {
-                        error!("anon extension is not installed");
-                        return Ok(());
-                    }
-                }
-                Err(e) => {
-                    error!("anon extension check failed with error: {}", e);
-                    return Ok(());
-                }
-            };
-
-            let query = format!("GRANT ALL ON SCHEMA anon TO {}", db_owner);
-            info!("granting anon extension permissions with query: {}", query);
-            db_client.simple_query(&query)?;
-
-            // Grant permissions to db_owner to use anon extension functions
-            let query = format!("GRANT ALL ON ALL FUNCTIONS IN SCHEMA anon TO {}", db_owner);
-            info!("granting anon extension permissions with query: {}", query);
-            db_client.simple_query(&query)?;
-
-            // This is needed, because some functions are defined as SECURITY DEFINER.
-            // In Postgres SECURITY DEFINER functions are executed with the privileges
-            // of the owner.
-            // In anon extension this it is needed to access some GUCs, which are only accessible to
-            // superuser. But we've patched postgres to allow db_owner to access them as well.
-            // So we need to change owner of these functions to db_owner.
-            let query = format!("
-                SELECT 'ALTER FUNCTION '||nsp.nspname||'.'||p.proname||'('||pg_get_function_identity_arguments(p.oid)||') OWNER TO {};'
-                from pg_proc p
-                join pg_namespace nsp ON p.pronamespace = nsp.oid
-                where nsp.nspname = 'anon';", db_owner);
-
-            info!("change anon extension functions owner to db owner");
-            db_client.simple_query(&query)?;
-
-            //  affects views as well
-            let query = format!("GRANT ALL ON ALL TABLES IN SCHEMA anon TO {}", db_owner);
-            info!("granting anon extension permissions with query: {}", query);
-            db_client.simple_query(&query)?;
-
-            let query = format!("GRANT ALL ON ALL SEQUENCES IN SCHEMA anon TO {}", db_owner);
-            info!("granting anon extension permissions with query: {}", query);
-            db_client.simple_query(&query)?;
-        }
-    }
-
-    Ok(())
-}

compute_tools/src/swap.rs

@@ -1,45 +0,0 @@
-use std::path::Path;
-
-use anyhow::{anyhow, Context};
-use tracing::warn;
-
-pub const RESIZE_SWAP_BIN: &str = "/neonvm/bin/resize-swap";
-
-pub fn resize_swap(size_bytes: u64) -> anyhow::Result<()> {
-    // run `/neonvm/bin/resize-swap --once {size_bytes}`
-    //
-    // Passing '--once' causes resize-swap to delete itself after successful completion, which
-    // means that if compute_ctl restarts later, we won't end up calling 'swapoff' while
-    // postgres is running.
-    //
-    // NOTE: resize-swap is not very clever. If present, --once MUST be the first arg.
-    let child_result = std::process::Command::new("/usr/bin/sudo")
-        .arg(RESIZE_SWAP_BIN)
-        .arg("--once")
-        .arg(size_bytes.to_string())
-        .spawn();
-
-    child_result
-        .context("spawn() failed")
-        .and_then(|mut child| child.wait().context("wait() failed"))
-        .and_then(|status| match status.success() {
-            true => Ok(()),
-            false => {
-                // The command failed. Maybe it was because the resize-swap file doesn't exist?
-                // The --once flag causes it to delete itself on success so we don't disable swap
-                // while postgres is running; maybe this is fine.
-                match Path::new(RESIZE_SWAP_BIN).try_exists() {
-                    Err(_) | Ok(true) => Err(anyhow!("process exited with {status}")),
-                    // The path doesn't exist; we're actually ok 
-                    Ok(false) => {
-                        warn!("ignoring \"not found\" error from resize-swap to avoid swapoff while compute is running");
-                        Ok(())
-                    },
-                }
-            }
-        })
-        // wrap any prior error with the overall context that we couldn't run the command
-        .with_context(|| {
-            format!("could not run `/usr/bin/sudo {RESIZE_SWAP_BIN} --once {size_bytes}`")
-        })
-}

compute_tools/src/sync_sk.rs

@@ -1,98 +0,0 @@
-// Utils for running sync_safekeepers
-use anyhow::Result;
-use tracing::info;
-use utils::lsn::Lsn;
-
-#[derive(Copy, Clone, Debug)]
-pub enum TimelineStatusResponse {
-    NotFound,
-    Ok(TimelineStatusOkResponse),
-}
-
-#[derive(Copy, Clone, Debug)]
-pub struct TimelineStatusOkResponse {
-    flush_lsn: Lsn,
-    commit_lsn: Lsn,
-}
-
-/// Get a safekeeper's metadata for our timeline. The id is only used for logging
-pub async fn ping_safekeeper(
-    id: String,
-    config: tokio_postgres::Config,
-) -> Result<TimelineStatusResponse> {
-    // TODO add retries
-
-    // Connect
-    info!("connecting to {}", id);
-    let (client, conn) = config.connect(tokio_postgres::NoTls).await?;
-    tokio::spawn(async move {
-        if let Err(e) = conn.await {
-            eprintln!("connection error: {}", e);
-        }
-    });
-
-    // Query
-    info!("querying {}", id);
-    let result = client.simple_query("TIMELINE_STATUS").await?;
-
-    // Parse result
-    info!("done with {}", id);
-    if let postgres::SimpleQueryMessage::Row(row) = &result[0] {
-        use std::str::FromStr;
-        let response = TimelineStatusResponse::Ok(TimelineStatusOkResponse {
-            flush_lsn: Lsn::from_str(row.get("flush_lsn").unwrap())?,
-            commit_lsn: Lsn::from_str(row.get("commit_lsn").unwrap())?,
-        });
-        Ok(response)
-    } else {
-        // Timeline doesn't exist
-        Ok(TimelineStatusResponse::NotFound)
-    }
-}
-
-/// Given a quorum of responses, check if safekeepers are synced at some Lsn
-pub fn check_if_synced(responses: Vec<TimelineStatusResponse>) -> Option<Lsn> {
-    // Check if all responses are ok
-    let ok_responses: Vec<TimelineStatusOkResponse> = responses
-        .iter()
-        .filter_map(|r| match r {
-            TimelineStatusResponse::Ok(ok_response) => Some(ok_response),
-            _ => None,
-        })
-        .cloned()
-        .collect();
-    if ok_responses.len() < responses.len() {
-        info!(
-            "not synced. Only {} out of {} know about this timeline",
-            ok_responses.len(),
-            responses.len()
-        );
-        return None;
-    }
-
-    // Get the min and the max of everything
-    let commit: Vec<Lsn> = ok_responses.iter().map(|r| r.commit_lsn).collect();
-    let flush: Vec<Lsn> = ok_responses.iter().map(|r| r.flush_lsn).collect();
-    let commit_max = commit.iter().max().unwrap();
-    let commit_min = commit.iter().min().unwrap();
-    let flush_max = flush.iter().max().unwrap();
-    let flush_min = flush.iter().min().unwrap();
-
-    // Check that all values are equal
-    if commit_min != commit_max {
-        info!("not synced. {:?} {:?}", commit_min, commit_max);
-        return None;
-    }
-    if flush_min != flush_max {
-        info!("not synced. {:?} {:?}", flush_min, flush_max);
-        return None;
-    }
-
-    // Check that commit == flush
-    if commit_max != flush_max {
-        info!("not synced. {:?} {:?}", commit_max, flush_max);
-        return None;
-    }
-
-    Some(*commit_max)
-}

compute_tools/tests/pg_helpers_tests.rs

@@ -28,7 +28,7 @@ mod pg_helpers_tests {
         assert_eq!(
             spec.cluster.settings.as_pg_settings(),
             r#"fsync = off
-wal_level = logical
+wal_level = replica
 hot_standby = on
 neon.safekeepers = '127.0.0.1:6502,127.0.0.1:6503,127.0.0.1:6501'
 wal_log_hints = on
@@ -89,12 +89,4 @@ test.escaping = 'here''s a backslash \\ and a quote '' and a double-quote " hoor
         assert_eq!(none_generic_options.find("missed_value"), None);
         assert_eq!(none_generic_options.find("invalid_value"), None);
     }
-
-    #[test]
-    fn test_escape_literal() {
-        assert_eq!(escape_literal("test"), "'test'");
-        assert_eq!(escape_literal("test'"), "'test'''");
-        assert_eq!(escape_literal("test\\'"), "E'test\\\\'''");
-        assert_eq!(escape_literal("test\\'\\'"), "E'test\\\\''\\\\'''");
-    }
 }

control_plane/Cargo.toml

@@ -6,36 +6,29 @@ license.workspace = true
 
 [dependencies]
 anyhow.workspace = true
-camino.workspace = true
 clap.workspace = true
 comfy-table.workspace = true
 git-version.workspace = true
-humantime.workspace = true
 nix.workspace = true
 once_cell.workspace = true
-humantime-serde.workspace = true
-hyper.workspace = true
+postgres.workspace = true
 regex.workspace = true
 reqwest = { workspace = true, features = ["blocking", "json"] }
-scopeguard.workspace = true
 serde.workspace = true
 serde_json.workspace = true
+serde_with.workspace = true
+tar.workspace = true
 thiserror.workspace = true
 toml.workspace = true
-toml_edit.workspace = true
-tokio.workspace = true
-tokio-postgres.workspace = true
-tokio-util.workspace = true
 url.workspace = true
+# Note: Do not directly depend on pageserver or safekeeper; use pageserver_api or safekeeper_api
+# instead, so that recompile times are better.
 pageserver_api.workspace = true
-pageserver_client.workspace = true
 postgres_backend.workspace = true
 safekeeper_api.workspace = true
 postgres_connection.workspace = true
 storage_broker.workspace = true
 utils.workspace = true
-whoami.workspace = true
 
 compute_api.workspace = true
 workspace_hack.workspace = true
-tracing.workspace = true

control_plane/README.md

@@ -1,26 +0,0 @@
-# Control Plane and Neon Local
-
-This crate contains tools to start a Neon development environment locally. This utility can be used with the `cargo neon` command.
-
-## Example: Start with Postgres 16
-
-To create and start a local development environment with Postgres 16, you will need to provide `--pg-version` flag to 3 of the start-up commands.
-
-```shell
-cargo neon init --pg-version 16
-cargo neon start
-cargo neon tenant create --set-default --pg-version 16
-cargo neon endpoint create main --pg-version 16
-cargo neon endpoint start main
-```
-
-## Example: Create Test User and Database
-
-By default, `cargo neon` starts an endpoint with `cloud_admin` and `postgres` database. If you want to have a role and a database similar to what we have on the cloud service, you can do it with the following commands when starting an endpoint.
-
-```shell
-cargo neon endpoint create main --pg-version 16 --update-catalog true
-cargo neon endpoint start main --create-test-user true
-```
-
-The first command creates `neon_superuser` and necessary roles. The second command creates `test` user and `neondb` database. You will see a connection string that connects you to the test user after running the second command.

control_plane/simple.conf

@@ -1,7 +1,6 @@
 # Minimal neon environment with one safekeeper. This is equivalent to the built-in
 # defaults that you get with no --config
-[[pageservers]]
-id=1
+[pageserver]
 listen_pg_addr = '127.0.0.1:64000'
 listen_http_addr = '127.0.0.1:9898'
 pg_auth_type = 'Trust'