Handle visbility map updates in WAL redo

.circleci/config.yml

@@ -1,549 +0,0 @@
-version: 2.1
-
-executors:
-  zenith-build-executor:
-    resource_class: xlarge
-    docker:
-      - image: cimg/rust:1.56.1
-  zenith-python-executor:
-    docker:
-      - image: cimg/python:3.7.10  # Oldest available 3.7 with Ubuntu 20.04 (for GLIBC and Rust) at CirlceCI
-
-jobs:
-  check-codestyle-rust:
-    executor: zenith-build-executor
-    steps:
-      - checkout
-      - run:
-          name: rustfmt
-          when: always
-          command: |
-            cargo fmt --all -- --check
-
-  # A job to build postgres
-  build-postgres:
-    executor: zenith-build-executor
-    parameters:
-      build_type:
-        type: enum
-        enum: ["debug", "release"]
-    environment:
-      BUILD_TYPE: << parameters.build_type >>
-    steps:
-        # Checkout the git repo (circleci doesn't have a flag to enable submodules here)
-      - checkout
-
-        # Grab the postgres git revision to build a cache key.
-        # Note this works even though the submodule hasn't been checkout out yet.
-      - run:
-          name: Get postgres cache key
-          command: |
-            git rev-parse HEAD:vendor/postgres > /tmp/cache-key-postgres
-
-      - restore_cache:
-          name: Restore postgres cache
-          keys:
-            # Restore ONLY if the rev key matches exactly
-            - v04-postgres-cache-<< parameters.build_type >>-{{ checksum "/tmp/cache-key-postgres" }}
-
-        # FIXME We could cache our own docker container, instead of installing packages every time.
-      - run:
-          name: apt install dependencies
-          command: |
-            if [ ! -e tmp_install/bin/postgres ]; then
-              sudo apt update
-              sudo apt install build-essential libreadline-dev zlib1g-dev flex bison libseccomp-dev
-            fi
-
-        # Build postgres if the restore_cache didn't find a build.
-        # `make` can't figure out whether the cache is valid, since
-        # it only compares file timestamps.
-      - run:
-          name: build postgres
-          command: |
-            if [ ! -e tmp_install/bin/postgres ]; then
-              # "depth 1" saves some time by not cloning the whole repo
-              git submodule update --init --depth 1
-              make postgres -j8
-            fi
-
-      - save_cache:
-          name: Save postgres cache
-          key: v04-postgres-cache-<< parameters.build_type >>-{{ checksum "/tmp/cache-key-postgres" }}
-          paths:
-            - tmp_install
-
-  # A job to build zenith rust code
-  build-zenith:
-    executor: zenith-build-executor
-    parameters:
-      build_type:
-        type: enum
-        enum: ["debug", "release"]
-    environment:
-      BUILD_TYPE: << parameters.build_type >>
-    steps:
-      - run:
-          name: apt install dependencies
-          command: |
-            sudo apt update
-            sudo apt install libssl-dev clang
-
-        # Checkout the git repo (without submodules)
-      - checkout
-
-        # Grab the postgres git revision to build a cache key.
-        # Note this works even though the submodule hasn't been checkout out yet.
-      - run:
-          name: Get postgres cache key
-          command: |
-            git rev-parse HEAD:vendor/postgres > /tmp/cache-key-postgres
-
-      - restore_cache:
-          name: Restore postgres cache
-          keys:
-            # Restore ONLY if the rev key matches exactly
-            - v04-postgres-cache-<< parameters.build_type >>-{{ checksum "/tmp/cache-key-postgres" }}
-
-      - restore_cache:
-          name: Restore rust cache
-          keys:
-            # Require an exact match. While an out of date cache might speed up the build,
-            # there's no way to clean out old packages, so the cache grows every time something
-            # changes.
-            - v04-rust-cache-deps-<< parameters.build_type >>-{{ checksum "Cargo.lock" }}
-
-        # Build the rust code, including test binaries
-      - run:
-          name: Rust build << parameters.build_type >>
-          command: |
-            if [[ $BUILD_TYPE == "debug" ]]; then
-              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
-              CARGO_FLAGS=
-            elif [[ $BUILD_TYPE == "release" ]]; then
-              cov_prefix=()
-              CARGO_FLAGS=--release
-            fi
-
-            export CARGO_INCREMENTAL=0
-            "${cov_prefix[@]}" cargo build $CARGO_FLAGS --bins --tests
-
-      - save_cache:
-          name: Save rust cache
-          key: v04-rust-cache-deps-<< parameters.build_type >>-{{ checksum "Cargo.lock" }}
-          paths:
-            - ~/.cargo/registry
-            - ~/.cargo/git
-            - target
-
-        # Run style checks
-        # has to run separately from cargo fmt section
-        # since needs to run with dependencies
-      - run:
-          name: cargo clippy
-          command: |
-            if [[ $BUILD_TYPE == "debug" ]]; then
-              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
-            elif [[ $BUILD_TYPE == "release" ]]; then
-              cov_prefix=()
-            fi
-
-            "${cov_prefix[@]}" ./run_clippy.sh
-
-        # Run rust unit tests
-      - run:
-          name: cargo test
-          command: |
-            if [[ $BUILD_TYPE == "debug" ]]; then
-              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
-            elif [[ $BUILD_TYPE == "release" ]]; then
-              cov_prefix=()
-            fi
-
-            "${cov_prefix[@]}" cargo test
-
-        # Install the rust binaries, for use by test jobs
-      - run:
-          name: Install rust binaries
-          command: |
-            if [[ $BUILD_TYPE == "debug" ]]; then
-              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
-            elif [[ $BUILD_TYPE == "release" ]]; then
-              cov_prefix=()
-            fi
-
-            binaries=$(
-              "${cov_prefix[@]}" cargo metadata --format-version=1 --no-deps |
-              jq -r '.packages[].targets[] | select(.kind | index("bin")) | .name'
-            )
-
-            test_exe_paths=$(
-              "${cov_prefix[@]}" cargo test --message-format=json --no-run |
-              jq -r '.executable | select(. != null)'
-            )
-
-            mkdir -p /tmp/zenith/bin
-            mkdir -p /tmp/zenith/test_bin
-            mkdir -p /tmp/zenith/etc
-
-            # Install target binaries
-            for bin in $binaries; do
-              SRC=target/$BUILD_TYPE/$bin
-              DST=/tmp/zenith/bin/$bin
-              cp $SRC $DST
-              echo $DST >> /tmp/zenith/etc/binaries.list
-            done
-
-            # Install test executables (for code coverage)
-            if [[ $BUILD_TYPE == "debug" ]]; then
-              for bin in $test_exe_paths; do
-                SRC=$bin
-                DST=/tmp/zenith/test_bin/$(basename $bin)
-                cp $SRC $DST
-                echo $DST >> /tmp/zenith/etc/binaries.list
-              done
-            fi
-
-        # Install the postgres binaries, for use by test jobs
-      - run:
-          name: Install postgres binaries
-          command: |
-            cp -a tmp_install /tmp/zenith/pg_install
-
-        # Save the rust binaries and coverage data for other jobs in this workflow.
-      - persist_to_workspace:
-          root: /tmp/zenith
-          paths:
-            - "*"
-
-  check-codestyle-python:
-    executor: zenith-python-executor
-    steps:
-      - checkout
-      - run:
-          name: Install deps
-          command: pipenv --python 3.7 install --dev
-      - run:
-          name: Run yapf to ensure code format
-          when: always
-          command: pipenv run yapf --recursive --diff .
-      - run:
-          name: Run mypy to check types
-          when: always
-          command: pipenv run mypy .
-
-  run-pytest:
-    executor: zenith-python-executor
-    parameters:
-      # pytest args to specify the tests to run.
-      #
-      # This can be a test file name, e.g. 'test_pgbench.py, or a subdirectory,
-      # or '-k foobar' to run tests containing string 'foobar'. See pytest man page
-      # section SPECIFYING TESTS / SELECTING TESTS for details.
-      #
-      # Select the type of Rust build. Must be "release" or "debug".
-      build_type:
-        type: string
-        default: "debug"
-      # This parameter is required, to prevent the mistake of running all tests in one job.
-      test_selection:
-        type: string
-        default: ""
-      # Arbitrary parameters to pytest. For example "-s" to prevent capturing stdout/stderr
-      extra_params:
-        type: string
-        default: ""
-      needs_postgres_source:
-        type: boolean
-        default: false
-      run_in_parallel:
-        type: boolean
-        default: true
-      save_perf_report:
-        type: boolean
-        default: false
-    environment:
-      BUILD_TYPE: << parameters.build_type >>
-    steps:
-      - attach_workspace:
-          at: /tmp/zenith
-      - checkout
-      - when:
-          condition: << parameters.needs_postgres_source >>
-          steps:
-            - run: git submodule update --init --depth 1
-      - run:
-          name: Install deps
-          command: pipenv --python 3.7 install
-      - run:
-          name: Run pytest
-          # pytest doesn't output test logs in real time, so CI job may fail with
-          # `Too long with no output` error, if a test is running for a long time.
-          # In that case, tests should have internal timeouts that are less than
-          # no_output_timeout, specified here.
-          no_output_timeout: 10m
-          environment:
-            - ZENITH_BIN: /tmp/zenith/bin
-            - POSTGRES_DISTRIB_DIR: /tmp/zenith/pg_install
-            - TEST_OUTPUT: /tmp/test_output
-            # this variable will be embedded in perf test report
-            # and is needed to distinguish different environments
-            - PLATFORM: zenith-local-ci
-          command: |
-            PERF_REPORT_DIR="$(realpath test_runner/perf-report-local)"
-
-            TEST_SELECTION="test_runner/<< parameters.test_selection >>"
-            EXTRA_PARAMS="<< parameters.extra_params >>"
-            if [ -z "$TEST_SELECTION" ]; then
-              echo "test_selection must be set"
-              exit 1
-            fi
-            if << parameters.run_in_parallel >>; then
-              EXTRA_PARAMS="-n4 $EXTRA_PARAMS"
-            fi
-            if << parameters.save_perf_report >>; then
-              if [[ $CIRCLE_BRANCH == "main" ]]; then
-                mkdir -p "$PERF_REPORT_DIR"
-                EXTRA_PARAMS="--out-dir $PERF_REPORT_DIR $EXTRA_PARAMS"
-              fi
-            fi
-
-            export GITHUB_SHA=$CIRCLE_SHA1
-
-            if [[ $BUILD_TYPE == "debug" ]]; then
-              cov_prefix=(scripts/coverage "--profraw-prefix=$CIRCLE_JOB" --dir=/tmp/zenith/coverage run)
-            elif [[ $BUILD_TYPE == "release" ]]; then
-              cov_prefix=()
-            fi
-
-            # Run the tests.
-            #
-            # The junit.xml file allows CircleCI to display more fine-grained test information
-            # in its "Tests" tab in the results page.
-            # --verbose prints name of each test (helpful when there are
-            # multiple tests in one file)
-            # -rA prints summary in the end
-            # -n4 uses four processes to run tests via pytest-xdist
-            # -s is not used to prevent pytest from capturing output, because tests are running
-            # in parallel and logs are mixed between different tests
-            "${cov_prefix[@]}" pipenv run pytest \
-              --junitxml=$TEST_OUTPUT/junit.xml \
-              --tb=short \
-              --verbose \
-              -m "not remote_cluster" \
-              -rA $TEST_SELECTION $EXTRA_PARAMS
-
-            if << parameters.save_perf_report >>; then
-              if [[ $CIRCLE_BRANCH == "main" ]]; then
-                # TODO: reuse scripts/git-upload
-                export REPORT_FROM="$PERF_REPORT_DIR"
-                export REPORT_TO=local
-                scripts/generate_and_push_perf_report.sh
-              fi
-            fi
-      - run:
-          # CircleCI artifacts are preserved one file at a time, so skipping
-          # this step isn't a good idea. If you want to extract the
-          # pageserver state, perhaps a tarball would be a better idea.
-          name: Delete all data but logs
-          when: always
-          command: |
-            du -sh /tmp/test_output/*
-            find /tmp/test_output -type f ! -name "pg.log" ! -name "pageserver.log" ! -name "safekeeper.log" ! -name "regression.diffs" ! -name "junit.xml" ! -name "*.filediff" ! -name "*.stdout" ! -name "*.stderr" -delete
-            du -sh /tmp/test_output/*
-      - store_artifacts:
-          path: /tmp/test_output
-      # The store_test_results step tells CircleCI where to find the junit.xml file.
-      - store_test_results:
-          path: /tmp/test_output
-      # Save coverage data (if any)
-      - persist_to_workspace:
-          root: /tmp/zenith
-          paths:
-            - "*"
-
-  coverage-report:
-    executor: zenith-build-executor
-    steps:
-      - attach_workspace:
-          at: /tmp/zenith
-      - checkout
-      - restore_cache:
-          name: Restore rust cache
-          keys:
-            # Require an exact match. While an out of date cache might speed up the build,
-            # there's no way to clean out old packages, so the cache grows every time something
-            # changes.
-            - v04-rust-cache-deps-debug-{{ checksum "Cargo.lock" }}
-      - run:
-          name: Install llvm-tools
-          command: |
-            # TODO: install a proper symbol demangler, e.g. rustfilt
-            # TODO: we should embed this into a docker image
-            rustup component add llvm-tools-preview
-      - run:
-          name: Build coverage report
-          command: |
-            COMMIT_URL=https://github.com/zenithdb/zenith/commit/$CIRCLE_SHA1
-
-            scripts/coverage \
-              --dir=/tmp/zenith/coverage report \
-              --input-objects=/tmp/zenith/etc/binaries.list \
-              --commit-url=$COMMIT_URL \
-              --format=github
-      - run:
-          name: Upload coverage report
-          command: |
-            LOCAL_REPO=$CIRCLE_PROJECT_USERNAME/$CIRCLE_PROJECT_REPONAME
-            REPORT_URL=https://zenithdb.github.io/zenith-coverage-data/$CIRCLE_SHA1
-            COMMIT_URL=https://github.com/zenithdb/zenith/commit/$CIRCLE_SHA1
-
-            scripts/git-upload \
-              --repo=https://$VIP_VAP_ACCESS_TOKEN@github.com/zenithdb/zenith-coverage-data.git \
-              --message="Add code coverage for $COMMIT_URL" \
-              copy /tmp/zenith/coverage/report $CIRCLE_SHA1 # COPY FROM TO_RELATIVE
-
-            # Add link to the coverage report to the commit
-            curl -f -X POST \
-            https://api.github.com/repos/$LOCAL_REPO/statuses/$CIRCLE_SHA1 \
-            -H "Accept: application/vnd.github.v3+json" \
-            --user "$CI_ACCESS_TOKEN" \
-            --data \
-              "{
-                \"state\": \"success\",
-                \"context\": \"zenith-coverage\",
-                \"description\": \"Coverage report is ready\",
-                \"target_url\": \"$REPORT_URL\"
-              }"
-
-  # Build zenithdb/zenith:latest image and push it to Docker hub
-  docker-image:
-    docker:
-      - image: cimg/base:2021.04
-    steps:
-      - checkout
-      - setup_remote_docker:
-          docker_layer_caching: true
-      - run:
-          name: Init postgres submodule
-          command: git submodule update --init --depth 1
-      - run:
-          name: Build and push Docker image
-          command: |
-            echo $DOCKER_PWD | docker login -u $DOCKER_LOGIN --password-stdin
-            docker build --build-arg GIT_VERSION=$CIRCLE_SHA1 -t zenithdb/zenith:latest . && docker push zenithdb/zenith:latest
-
-  # Trigger a new remote CI job
-  remote-ci-trigger:
-    docker:
-      - image: cimg/base:2021.04
-    parameters:
-      remote_repo:
-        type: string
-    environment:
-      REMOTE_REPO: << parameters.remote_repo >>
-    steps:
-      - run:
-          name: Set PR's status to pending
-          command: |
-            LOCAL_REPO=$CIRCLE_PROJECT_USERNAME/$CIRCLE_PROJECT_REPONAME
-
-            curl -f -X POST \
-            https://api.github.com/repos/$LOCAL_REPO/statuses/$CIRCLE_SHA1 \
-            -H "Accept: application/vnd.github.v3+json" \
-            --user "$CI_ACCESS_TOKEN" \
-            --data \
-              "{
-                \"state\": \"pending\",
-                \"context\": \"zenith-remote-ci\",
-                \"description\": \"[$REMOTE_REPO] Remote CI job is about to start\"
-              }"
-      - run:
-          name: Request a remote CI test
-          command: |
-            LOCAL_REPO=$CIRCLE_PROJECT_USERNAME/$CIRCLE_PROJECT_REPONAME
-
-            curl -f -X POST \
-            https://api.github.com/repos/$REMOTE_REPO/actions/workflows/testing.yml/dispatches \
-            -H "Accept: application/vnd.github.v3+json" \
-            --user "$CI_ACCESS_TOKEN" \
-            --data \
-              "{
-                \"ref\": \"main\",
-                \"inputs\": {
-                  \"ci_job_name\": \"zenith-remote-ci\",
-                  \"commit_hash\": \"$CIRCLE_SHA1\",
-                  \"remote_repo\": \"$LOCAL_REPO\"
-                }
-              }"
-
-workflows:
-  build_and_test:
-    jobs:
-      - check-codestyle-rust
-      - check-codestyle-python
-      - build-postgres:
-          name: build-postgres-<< matrix.build_type >>
-          matrix:
-            parameters:
-              build_type: ["debug", "release"]
-      - build-zenith:
-          name: build-zenith-<< matrix.build_type >>
-          matrix:
-            parameters:
-              build_type: ["debug", "release"]
-          requires:
-            - build-postgres-<< matrix.build_type >>
-      - run-pytest:
-          name: pg_regress-tests-<< matrix.build_type >>
-          matrix:
-            parameters:
-              build_type: ["debug", "release"]
-          test_selection: batch_pg_regress
-          needs_postgres_source: true
-          requires:
-            - build-zenith-<< matrix.build_type >>
-      - run-pytest:
-          name: other-tests-<< matrix.build_type >>
-          matrix:
-            parameters:
-              build_type: ["debug", "release"]
-          test_selection: batch_others
-          requires:
-            - build-zenith-<< matrix.build_type >>
-      - run-pytest:
-          name: benchmarks
-          build_type: release
-          test_selection: performance
-          run_in_parallel: false
-          save_perf_report: true
-          requires:
-            - build-zenith-release
-      - coverage-report:
-          # Context passes credentials for gh api
-          context: CI_ACCESS_TOKEN
-          requires:
-            # TODO: consider adding more
-            - other-tests-debug
-      - docker-image:
-          # Context gives an ability to login
-          context: Docker Hub
-          # Build image only for commits to main
-          filters:
-            branches:
-              only:
-                - main
-          requires:
-            - pg_regress-tests-release
-            - other-tests-release
-      - remote-ci-trigger:
-          # Context passes credentials for gh api
-          context: CI_ACCESS_TOKEN
-          remote_repo: "zenithdb/console"
-          requires:
-            # XXX: Successful build doesn't mean everything is OK, but
-            # the job to be triggered takes so much time to complete (~22 min)
-            # that it's better not to wait for the commented-out steps
-            - build-zenith-debug
-            # - pg_regress-tests-release
-            # - other-tests-release

.dockerignore

@@ -1,18 +0,0 @@
-**/.git/
-**/__pycache__
-**/.pytest_cache
-
-.git
-target
-tmp_check
-tmp_install
-tmp_check_cli
-test_output
-.vscode
-.zenith
-integration_tests/.zenith
-.mypy_cache
-
-Dockerfile
-.dockerignore
-

.github/workflows/benchmarking.yml

@@ -1,114 +0,0 @@
-name: benchmarking
-
-on:
-  # uncomment to run on push for debugging your PR
-  # push:
-  #   branches: [ mybranch ]
-  schedule:
-    # * is a special character in YAML so you have to quote this string
-    #          ┌───────────── minute (0 - 59)
-    #          │ ┌───────────── hour (0 - 23)
-    #          │ │ ┌───────────── day of the month (1 - 31)
-    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
-    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
-    - cron:  '36 7 * * *' # run once a day, timezone is utc
-
-  workflow_dispatch: # adds ability to run this manually
-
-env:
-  BASE_URL: "https://console.zenith.tech"
-
-jobs:
-  bench:
-    # this workflow runs on self hosteed runner
-    # it's environment is quite different from usual guthub runner
-    # probably the most important difference is that it doesnt start from clean workspace each time
-    # e g if you install system packages they are not cleaned up since you install them directly in host machine
-    # not a container or something
-    # See documentation for more info: https://docs.github.com/en/actions/hosting-your-own-runners/about-self-hosted-runners
-    runs-on: [self-hosted, zenith-benchmarker]
-
-    env:
-      PG_BIN: "/usr/pgsql-13/bin"
-
-    steps:
-    - name: Checkout zenith repo
-      uses: actions/checkout@v2
-
-    # actions/setup-python@v2 is not working correctly on self-hosted runners
-    # see https://github.com/actions/setup-python/issues/162
-    # and probably https://github.com/actions/setup-python/issues/162#issuecomment-865387976 in particular
-    # so the simplest solution to me is to use already installed system python and spin virtualenvs for job runs.
-    # there is Python 3.7.10 already installed on the machine so use it to install pipenv and then use pipenv's virtuealenvs
-    - name: Install pipenv & deps
-      run: |
-        python3 -m pip install --upgrade pipenv wheel
-        # since pip/pipenv caches are reused there shouldn't be any troubles with install every time
-        pipenv install
-
-    - name: Show versions
-      run: |
-        echo Python
-        python3 --version
-        pipenv run python3 --version
-        echo Pipenv
-        pipenv --version
-        echo Pgbench
-        $PG_BIN/pgbench --version
-
-    # FIXME cluster setup is skipped due to various changes in console API
-    # for now pre created cluster is used. When API gain some stability
-    # after massive changes dynamic cluster setup will be revived.
-    # So use pre created cluster. It needs to be started manually, but stop is automatic after 5 minutes of inactivity
-    - name: Setup cluster
-      env:
-        BENCHMARK_CONSOLE_USER_PASSWORD: "${{ secrets.BENCHMARK_CONSOLE_USER_PASSWORD }}"
-        BENCHMARK_CONSOLE_ACCESS_TOKEN: "${{ secrets.BENCHMARK_CONSOLE_ACCESS_TOKEN }}"
-        BENCHMARK_CLUSTER_ID: "${{ secrets.BENCHMARK_CLUSTER_ID }}"
-      shell: bash
-      run: |
-        set -e
-
-        echo "Starting cluster"
-        CLUSTER=$(curl -s --fail --show-error -X POST $BASE_URL/api/v1/clusters/$BENCHMARK_CLUSTER_ID/start \
-            -H "Authorization: Bearer $BENCHMARK_CONSOLE_ACCESS_TOKEN")
-        echo $CLUSTER | python -m json.tool
-
-        echo "Waiting for cluster to become ready"
-        sleep 10
-
-        echo "CLUSTER_ID=$BENCHMARK_CLUSTER_ID" >> $GITHUB_ENV
-        CLUSTER=$(curl -s --fail --show-error -X GET $BASE_URL/api/v1/clusters/$BENCHMARK_CLUSTER_ID.json \
-            -H "Authorization: Bearer $BENCHMARK_CONSOLE_ACCESS_TOKEN")
-        echo $CLUSTER | python -m json.tool
-
-    - name: Run benchmark
-      # pgbench is installed system wide from official repo
-      # https://download.postgresql.org/pub/repos/yum/13/redhat/rhel-7-x86_64/
-      # via
-      # sudo tee /etc/yum.repos.d/pgdg.repo<<EOF
-      # [pgdg13]
-      # name=PostgreSQL 13 for RHEL/CentOS 7 - x86_64
-      # baseurl=https://download.postgresql.org/pub/repos/yum/13/redhat/rhel-7-x86_64/
-      # enabled=1
-      # gpgcheck=0
-      # EOF
-      # sudo yum makecache
-      # sudo yum install postgresql13-contrib
-      # actual binaries are located in /usr/pgsql-13/bin/
-      env:
-        TEST_PG_BENCH_TRANSACTIONS_MATRIX: "5000,10000,20000"
-        TEST_PG_BENCH_SCALES_MATRIX: "10,15"
-        PLATFORM: "zenith-staging"
-        BENCHMARK_CONSOLE_ACCESS_TOKEN: "${{ secrets.BENCHMARK_CONSOLE_ACCESS_TOKEN }}"
-        BENCHMARK_CONNSTR: "${{ secrets.BENCHMARK_STAGING_CONNSTR }}"
-        REMOTE_ENV: "1" # indicate to test harness that we do not have zenith binaries locally
-      run: |
-        mkdir -p perf-report-staging
-        pipenv run pytest test_runner/performance/ -v -m "remote_cluster" --skip-interfering-proc-check --out-dir perf-report-staging
-
-    - name: Submit result
-      env:
-        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
-      run: |
-        REPORT_FROM=$(realpath perf-report-staging) REPORT_TO=staging scripts/generate_and_push_perf_report.sh

.github/workflows/testing.yml

@@ -35,7 +35,7 @@ jobs:
       - name: Install postgres dependencies
         run: |
           sudo apt update
-          sudo apt install build-essential libreadline-dev zlib1g-dev flex bison libseccomp-dev
+          sudo apt install build-essential libreadline-dev zlib1g-dev flex bison libxml2-dev libcurl4-openssl-dev
 
       - name: Set pg revision for caching
         id: pg_ver

.gitignore

@@ -2,12 +2,5 @@
 /tmp_check
 /tmp_install
 /tmp_check_cli
-__pycache__/
-test_output/
 .vscode
-/.zenith
-/integration_tests/.zenith
-
-# Coverage
-*.profraw
-*.profdata
+.zenith

.gitmodules

@@ -1,4 +1,4 @@
 [submodule "vendor/postgres"]
 	path = vendor/postgres
-	url = https://github.com/zenithdb/postgres
+	url = https://github.com/libzenith/postgres
 	branch = main

.yapfignore

@@ -1,10 +0,0 @@
-# This file is only read when `yapf` is run from this directory.
-# Hence we only top-level directories here to avoid confusion.
-# See source code for the exact file format: https://github.com/google/yapf/blob/c6077954245bc3add82dafd853a1c7305a6ebd20/yapf/yapflib/file_resources.py#L40-L43
-vendor/
-target/
-tmp_install/
-__pycache__/
-test_output/
-.zenith/
-.git/

CONTRIBUTING.md

@@ -1,31 +0,0 @@
-# How to contribute
-
-Howdy! Usual good software engineering practices apply. Write
-tests. Write comments. Follow standard Rust coding practices where
-possible. Use 'cargo fmt' and 'clippy' to tidy up formatting.
-
-There are soft spots in the code, which could use cleanup,
-refactoring, additional comments, and so forth. Let's try to raise the
-bar, and clean things up as we go. Try to leave code in a better shape
-than it was before.
-
-## Submitting changes
-
-1. Make a PR for every change.
-
-   Even seemingly trivial patches can break things in surprising ways.
-Use of common sense is OK. If you're only fixing a typo in a comment,
-it's probably fine to just push it. But if in doubt, open a PR.
-
-2. Get at least one +1 on your PR before you push.
-
-   For simple patches, it will only take a minute for someone to review
-it.
-
-3. Always keep the CI green.
-
-   Do not push, if the CI failed on your PR. Even if you think it's not
-your patch's fault. Help to fix the root cause if something else has
-broken the CI, before pushing.
-
-*Happy Hacking!*

COPYRIGHT

@@ -1,20 +0,0 @@
-This software is licensed under the Apache 2.0 License:
-
-----------------------------------------------------------------------------
-Copyright 2021 Zenith Labs, Inc
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-----------------------------------------------------------------------------
-
-The PostgreSQL submodule in vendor/postgres is licensed under the
-PostgreSQL license. See vendor/postgres/COPYRIGHT.

Cargo.toml

@@ -1,17 +1,10 @@
 [workspace]
 members = [
-    "control_plane",
+    "integration_tests",
     "pageserver",
-    "postgres_ffi",
-    "proxy",
     "walkeeper",
-    "workspace_hack",
     "zenith",
-    "zenith_metrics",
+    "control_plane",
+    "postgres_ffi",
     "zenith_utils",
 ]
-
-[profile.release]
-# This is useful for profiling and, to some extent, debug.
-# Besides, debug info should not affect the performance.
-debug = true

Dockerfile

@@ -1,64 +0,0 @@
-#
-# Docker image for console integration testing.
-#
-
-#
-# Build Postgres separately --- this layer will be rebuilt only if one of
-# mentioned paths will get any changes.
-#
-FROM zenithdb/build:buster AS pg-build
-WORKDIR /zenith
-COPY ./vendor/postgres vendor/postgres
-COPY ./Makefile Makefile
-ENV BUILD_TYPE release
-RUN make -j $(getconf _NPROCESSORS_ONLN) -s postgres
-RUN rm -rf postgres_install/build
-
-#
-# Build zenith binaries
-#
-# TODO: build cargo deps as separate layer. We used cargo-chef before but that was
-# net time waste in a lot of cases. Copying Cargo.lock with empty lib.rs should do the work.
-#
-FROM zenithdb/build:buster AS build
-
-ARG GIT_VERSION
-RUN if [ -z "$GIT_VERSION" ]; then echo "GIT_VERSION is reqired, use build_arg to pass it"; exit 1; fi
-
-WORKDIR /zenith
-COPY --from=pg-build /zenith/tmp_install/include/postgresql/server tmp_install/include/postgresql/server
-
-COPY . .
-RUN GIT_VERSION=$GIT_VERSION cargo build --release
-
-#
-# Copy binaries to resulting image.
-#
-FROM debian:buster-slim
-WORKDIR /data
-
-RUN apt-get update && apt-get -yq install libreadline-dev libseccomp-dev openssl ca-certificates && \
-    mkdir zenith_install
-
-COPY --from=build /zenith/target/release/pageserver /usr/local/bin
-COPY --from=build /zenith/target/release/safekeeper /usr/local/bin
-COPY --from=build /zenith/target/release/proxy /usr/local/bin
-COPY --from=pg-build /zenith/tmp_install postgres_install
-COPY docker-entrypoint.sh /docker-entrypoint.sh
-
-# Remove build artifacts (~ 500 MB)
-RUN rm -rf postgres_install/build && \
-    # 'Install' Postgres binaries locally
-    cp -r postgres_install/* /usr/local/ && \
-    # Prepare an archive of Postgres binaries (should be around 11 MB)
-    # and keep it inside container for an ease of deploy pipeline.
-    cd postgres_install && tar -czf /data/postgres_install.tar.gz . && cd .. && \
-    rm -rf postgres_install
-
-RUN useradd -d /data zenith && chown -R zenith:zenith /data
-
-VOLUME ["/data"]
-USER zenith
-EXPOSE 6400
-ENTRYPOINT ["/docker-entrypoint.sh"]
-CMD ["pageserver"]

Dockerfile.alpine

@@ -1,95 +0,0 @@
-#
-# Docker image for console integration testing.
-#
-# We may also reuse it in CI to unify installation process and as a general binaries building
-# tool for production servers.
-#
-# Dynamic linking is used for librocksdb and libstdc++ bacause librocksdb-sys calls
-# bindgen with "dynamic" feature flag. This also prevents usage of dockerhub alpine-rust
-# images which are statically linked and have guards against any dlopen. I would rather
-# prefer all static binaries so we may change the way librocksdb-sys builds or wait until
-# we will have our own storage and drop rockdb dependency.
-#
-# Cargo-chef is used to separate dependencies building from main binaries building. This
-# way `docker build` will download and install dependencies only of there are changes to
-# out Cargo.toml files.
-#
-
-
-#
-# build postgres separately -- this layer will be rebuilt only if one of
-# mentioned paths will get any changes
-#
-FROM alpine:3.13 as pg-build
-RUN apk add --update clang llvm compiler-rt compiler-rt-static lld musl-dev binutils \
-                     make bison flex readline-dev zlib-dev perl linux-headers libseccomp-dev
-WORKDIR zenith
-COPY ./vendor/postgres vendor/postgres
-COPY ./Makefile Makefile
-# Build using clang and lld
-RUN CC='clang' LD='lld' CFLAGS='-fuse-ld=lld --rtlib=compiler-rt' make postgres -j4
-
-#
-# Calculate cargo dependencies.
-# This will always run, but only generate recipe.json with list of dependencies without
-# installing them.
-#
-FROM alpine:20210212 as cargo-deps-inspect
-RUN apk add --update rust cargo
-RUN cargo install cargo-chef
-WORKDIR zenith
-COPY . .
-RUN cargo chef prepare --recipe-path recipe.json
-
-#
-# Build cargo dependencies.
-# This temp cantainner would be build only if recipe.json was changed.
-#
-FROM alpine:20210212 as deps-build
-RUN apk add --update rust cargo openssl-dev clang build-base
-# rust-rocksdb can be built against system-wide rocksdb -- that saves about
-# 10 minutes during build. Rocksdb apk package is in testing now, but use it
-# anyway. In case of any troubles we can download and build rocksdb here manually
-# (to cache it as a docker layer).
-RUN apk --no-cache --update --repository https://dl-cdn.alpinelinux.org/alpine/edge/testing add rocksdb-dev
-WORKDIR zenith
-COPY --from=pg-build /zenith/tmp_install/include/postgresql/server tmp_install/include/postgresql/server
-COPY --from=cargo-deps-inspect /root/.cargo/bin/cargo-chef /root/.cargo/bin/
-COPY --from=cargo-deps-inspect /zenith/recipe.json recipe.json
-RUN ROCKSDB_LIB_DIR=/usr/lib/ cargo chef cook --release --recipe-path recipe.json
-
-#
-# Build zenith binaries
-#
-FROM alpine:20210212 as build
-RUN apk add --update rust cargo openssl-dev clang build-base
-RUN apk --no-cache --update --repository https://dl-cdn.alpinelinux.org/alpine/edge/testing add rocksdb-dev
-WORKDIR zenith
-COPY . .
-# Copy cached dependencies
-COPY --from=pg-build /zenith/tmp_install/include/postgresql/server tmp_install/include/postgresql/server
-COPY --from=deps-build /zenith/target target
-COPY --from=deps-build /root/.cargo /root/.cargo
-RUN cargo build --release
-
-#
-# Copy binaries to resulting image.
-# build-base hare to provide libstdc++ (it will also bring gcc, but leave it this way until we figure
-# out how to statically link rocksdb or avoid it at all).
-#
-FROM alpine:3.13
-RUN apk add --update openssl build-base libseccomp-dev
-RUN apk --no-cache --update --repository https://dl-cdn.alpinelinux.org/alpine/edge/testing add rocksdb
-COPY --from=build /zenith/target/release/pageserver /usr/local/bin
-COPY --from=build /zenith/target/release/safekeeper /usr/local/bin
-COPY --from=build /zenith/target/release/proxy /usr/local/bin
-COPY --from=pg-build /zenith/tmp_install /usr/local
-COPY docker-entrypoint.sh /docker-entrypoint.sh
-
-RUN addgroup zenith && adduser -h /data -D -G zenith zenith
-VOLUME ["/data"]
-WORKDIR /data
-USER zenith
-EXPOSE 6400
-ENTRYPOINT ["/docker-entrypoint.sh"]
-CMD ["pageserver"]

Dockerfile.build

@@ -1,15 +0,0 @@
-#
-# Image with all the required dependencies to build https://github.com/zenithdb/zenith
-# and Postgres from https://github.com/zenithdb/postgres
-# Also includes some rust development and build tools.
-#
-FROM rust:slim-buster
-WORKDIR /zenith
-
-# Install postgres and zenith build dependencies
-# clang is for rocksdb
-RUN apt-get update && apt-get -yq install automake libtool build-essential bison flex libreadline-dev zlib1g-dev libxml2-dev \
-                                          libseccomp-dev pkg-config libssl-dev clang
-
-# Install rust tools
-RUN rustup component add clippy && cargo install cargo-audit

LICENSE

@@ -1,202 +0,0 @@
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.

Makefile

@@ -1,104 +1,53 @@
-# Seccomp BPF is only available for Linux
-UNAME_S := $(shell uname -s)
-ifeq ($(UNAME_S),Linux)
-	SECCOMP = --with-libseccomp
-else
-	SECCOMP =
-endif
-
-#
-# We differentiate between release / debug build types using the BUILD_TYPE
-# environment variable.
-#
-BUILD_TYPE ?= debug
-ifeq ($(BUILD_TYPE),release)
-	PG_CONFIGURE_OPTS = --enable-debug
-	PG_CFLAGS = -O2 -g3 $(CFLAGS)
-	# Unfortunately, `--profile=...` is a nightly feature
-	CARGO_BUILD_FLAGS += --release
-else ifeq ($(BUILD_TYPE),debug)
-	PG_CONFIGURE_OPTS = --enable-debug --enable-cassert --enable-depend
-	PG_CFLAGS = -O0 -g3 $(CFLAGS)
-else
-$(error Bad build type `$(BUILD_TYPE)', see Makefile for options)
-endif
-
-# Choose whether we should be silent or verbose
-CARGO_BUILD_FLAGS += --$(if $(filter s,$(MAKEFLAGS)),quiet,verbose)
-# Fix for a corner case when make doesn't pass a jobserver
-CARGO_BUILD_FLAGS += $(filter -j1,$(MAKEFLAGS))
-
-# This option has a side effect of passing make jobserver to cargo.
-# However, we shouldn't do this if `make -n` (--dry-run) has been asked.
-CARGO_CMD_PREFIX += $(if $(filter n,$(MAKEFLAGS)),,+)
-# Force cargo not to print progress bar
-CARGO_CMD_PREFIX += CARGO_TERM_PROGRESS_WHEN=never CI=1
-
 #
 # Top level Makefile to build Zenith and PostgreSQL
 #
-.PHONY: all
 all: zenith postgres
 
+# We don't want to run 'cargo build' in parallel with the postgres build,
+# because interleaving cargo build output with postgres build output looks
+# confusing. Also, 'cargo build' is parallel on its own, so it would be too
+# much parallelism. (Recursive invocation of postgres target still gets any
+# '-j' flag from the command line, so 'make -j' is still useful.)
+.NOTPARALLEL:
+
 ### Zenith Rust bits
 #
 # The 'postgres_ffi' depends on the Postgres headers.
-.PHONY: zenith
 zenith: postgres-headers
-	+@echo "Compiling Zenith"
-	$(CARGO_CMD_PREFIX) cargo build $(CARGO_BUILD_FLAGS)
+	cargo build
 
 ### PostgreSQL parts
 tmp_install/build/config.status:
 	+@echo "Configuring postgres build"
 	mkdir -p tmp_install/build
 	(cd tmp_install/build && \
-	../../vendor/postgres/configure CFLAGS='$(PG_CFLAGS)' \
-		$(PG_CONFIGURE_OPTS) \
-		$(SECCOMP) \
-		--prefix=$(abspath tmp_install) > configure.log)
+	../../vendor/postgres/configure CFLAGS='-O0' --enable-debug --enable-cassert \
+	    --enable-depend --with-libxml --prefix=$(abspath tmp_install) > configure.log)
 
 # nicer alias for running 'configure'
-.PHONY: postgres-configure
 postgres-configure: tmp_install/build/config.status
 
 # Install the PostgreSQL header files into tmp_install/include
-.PHONY: postgres-headers
 postgres-headers: postgres-configure
 	+@echo "Installing PostgreSQL headers"
 	$(MAKE) -C tmp_install/build/src/include MAKELEVEL=0 install
 
-# Compile and install PostgreSQL and contrib/zenith
-.PHONY: postgres
-postgres: postgres-configure \
-		  postgres-headers # to prevent `make install` conflicts with zenith's `postgres-headers`
+# Compile and install PostgreSQL
+postgres: postgres-configure
 	+@echo "Compiling PostgreSQL"
 	$(MAKE) -C tmp_install/build MAKELEVEL=0 install
-	+@echo "Compiling contrib/zenith"
-	$(MAKE) -C tmp_install/build/contrib/zenith install
-	+@echo "Compiling contrib/zenith_test_utils"
-	$(MAKE) -C tmp_install/build/contrib/zenith_test_utils install
 
-.PHONY: postgres-clean
 postgres-clean:
 	$(MAKE) -C tmp_install/build MAKELEVEL=0 clean
 
 # This doesn't remove the effects of 'configure'.
-.PHONY: clean
 clean:
-	cd tmp_install/build && $(MAKE) clean
-	$(CARGO_CMD_PREFIX) cargo clean
+	cd tmp_install/build && ${MAKE} clean
+	cargo clean
 
 # This removes everything
-.PHONY: distclean
 distclean:
 	rm -rf tmp_install
-	$(CARGO_CMD_PREFIX) cargo clean
+	cargo clean
 
-.PHONY: fmt
-fmt:
-	./pre-commit.py --fix-inplace
-
-.PHONY: setup-pre-commit-hook
-setup-pre-commit-hook:
-	ln -s -f ../../pre-commit.py .git/hooks/pre-commit
+.PHONY: postgres-configure postgres postgres-headers zenith

Pipfile

@@ -1,30 +0,0 @@
-[[source]]
-url = "https://pypi.python.org/simple"
-verify_ssl = true
-name = "pypi"
-
-[packages]
-pytest = ">=6.0.0"
-typing-extensions = "*"
-pyjwt = {extras = ["crypto"], version = "*"}
-requests = "*"
-pytest-xdist = "*"
-asyncpg = "*"
-cached-property = "*"
-psycopg2-binary = "*"
-jinja2 = "*"
-
-[dev-packages]
-# Behavior may change slightly between versions. These are run continuously,
-# so we pin exact versions to avoid suprising breaks. Update if comfortable.
-yapf = "==0.31.0"
-mypy = "==0.910"
-# Non-pinned packages follow.
-pipenv = "*"
-flake8 = "*"
-types-requests = "*"
-types-psycopg2 = "*"
-
-[requires]
-# we need at least 3.7, but pipenv doesn't allow to say this directly
-python_version = "3"

Pipfile.lock

@@ -1,652 +0,0 @@
-{
-    "_meta": {
-        "hash": {
-            "sha256": "c309cb963a7b07ae3d30e9cbf08b495f77bdecc0e5356fc89d133c4fbcb65b2b"
-        },
-        "pipfile-spec": 6,
-        "requires": {
-            "python_version": "3"
-        },
-        "sources": [
-            {
-                "name": "pypi",
-                "url": "https://pypi.python.org/simple",
-                "verify_ssl": true
-            }
-        ]
-    },
-    "default": {
-        "asyncpg": {
-            "hashes": [
-                "sha256:129d501f3d30616afd51eb8d3142ef51ba05374256bd5834cec3ef4956a9b317",
-                "sha256:29ef6ae0a617fc13cc2ac5dc8e9b367bb83cba220614b437af9b67766f4b6b20",
-                "sha256:41704c561d354bef01353835a7846e5606faabbeb846214dfcf666cf53319f18",
-                "sha256:556b0e92e2b75dc028b3c4bc9bd5162ddf0053b856437cf1f04c97f9c6837d03",
-                "sha256:8ff5073d4b654e34bd5eaadc01dc4d68b8a9609084d835acd364cd934190a08d",
-                "sha256:a458fc69051fbb67d995fdda46d75a012b5d6200f91e17d23d4751482640ed4c",
-                "sha256:a7095890c96ba36f9f668eb552bb020dddb44f8e73e932f8573efc613ee83843",
-                "sha256:a738f4807c853623d3f93f0fea11f61be6b0e5ca16ea8aeb42c2c7ee742aa853",
-                "sha256:c4fc0205fe4ddd5aeb3dfdc0f7bafd43411181e1f5650189608e5971cceacff1",
-                "sha256:dd2fa063c3344823487d9ddccb40802f02622ddf8bf8a6cc53885ee7a2c1c0c6",
-                "sha256:ddffcb85227bf39cd1bedd4603e0082b243cf3b14ced64dce506a15b05232b83",
-                "sha256:e36c6806883786b19551bb70a4882561f31135dc8105a59662e0376cf5b2cbc5",
-                "sha256:eed43abc6ccf1dc02e0d0efc06ce46a411362f3358847c6b0ec9a43426f91ece"
-            ],
-            "index": "pypi",
-            "version": "==0.24.0"
-        },
-        "attrs": {
-            "hashes": [
-                "sha256:149e90d6d8ac20db7a955ad60cf0e6881a3f20d37096140088356da6c716b0b1",
-                "sha256:ef6aaac3ca6cd92904cdd0d83f629a15f18053ec84e6432106f7a4d04ae4f5fb"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
-            "version": "==21.2.0"
-        },
-        "cached-property": {
-            "hashes": [
-                "sha256:9fa5755838eecbb2d234c3aa390bd80fbd3ac6b6869109bfc1b499f7bd89a130",
-                "sha256:df4f613cf7ad9a588cc381aaf4a512d26265ecebd5eb9e1ba12f1319eb85a6a0"
-            ],
-            "index": "pypi",
-            "version": "==1.5.2"
-        },
-        "certifi": {
-            "hashes": [
-                "sha256:78884e7c1d4b00ce3cea67b44566851c4343c120abd683433ce934a68ea58872",
-                "sha256:d62a0163eb4c2344ac042ab2bdf75399a71a2d8c7d47eac2e2ee91b9d6339569"
-            ],
-            "version": "==2021.10.8"
-        },
-        "cffi": {
-            "hashes": [
-                "sha256:00c878c90cb53ccfaae6b8bc18ad05d2036553e6d9d1d9dbcf323bbe83854ca3",
-                "sha256:0104fb5ae2391d46a4cb082abdd5c69ea4eab79d8d44eaaf79f1b1fd806ee4c2",
-                "sha256:06c48159c1abed75c2e721b1715c379fa3200c7784271b3c46df01383b593636",
-                "sha256:0808014eb713677ec1292301ea4c81ad277b6cdf2fdd90fd540af98c0b101d20",
-                "sha256:10dffb601ccfb65262a27233ac273d552ddc4d8ae1bf93b21c94b8511bffe728",
-                "sha256:14cd121ea63ecdae71efa69c15c5543a4b5fbcd0bbe2aad864baca0063cecf27",
-                "sha256:17771976e82e9f94976180f76468546834d22a7cc404b17c22df2a2c81db0c66",
-                "sha256:181dee03b1170ff1969489acf1c26533710231c58f95534e3edac87fff06c443",
-                "sha256:23cfe892bd5dd8941608f93348c0737e369e51c100d03718f108bf1add7bd6d0",
-                "sha256:263cc3d821c4ab2213cbe8cd8b355a7f72a8324577dc865ef98487c1aeee2bc7",
-                "sha256:2756c88cbb94231c7a147402476be2c4df2f6078099a6f4a480d239a8817ae39",
-                "sha256:27c219baf94952ae9d50ec19651a687b826792055353d07648a5695413e0c605",
-                "sha256:2a23af14f408d53d5e6cd4e3d9a24ff9e05906ad574822a10563efcef137979a",
-                "sha256:31fb708d9d7c3f49a60f04cf5b119aeefe5644daba1cd2a0fe389b674fd1de37",
-                "sha256:3415c89f9204ee60cd09b235810be700e993e343a408693e80ce7f6a40108029",
-                "sha256:3773c4d81e6e818df2efbc7dd77325ca0dcb688116050fb2b3011218eda36139",
-                "sha256:3b96a311ac60a3f6be21d2572e46ce67f09abcf4d09344c49274eb9e0bf345fc",
-                "sha256:3f7d084648d77af029acb79a0ff49a0ad7e9d09057a9bf46596dac9514dc07df",
-                "sha256:41d45de54cd277a7878919867c0f08b0cf817605e4eb94093e7516505d3c8d14",
-                "sha256:4238e6dab5d6a8ba812de994bbb0a79bddbdf80994e4ce802b6f6f3142fcc880",
-                "sha256:45db3a33139e9c8f7c09234b5784a5e33d31fd6907800b316decad50af323ff2",
-                "sha256:45e8636704eacc432a206ac7345a5d3d2c62d95a507ec70d62f23cd91770482a",
-                "sha256:4958391dbd6249d7ad855b9ca88fae690783a6be9e86df65865058ed81fc860e",
-                "sha256:4a306fa632e8f0928956a41fa8e1d6243c71e7eb59ffbd165fc0b41e316b2474",
-                "sha256:57e9ac9ccc3101fac9d6014fba037473e4358ef4e89f8e181f8951a2c0162024",
-                "sha256:59888172256cac5629e60e72e86598027aca6bf01fa2465bdb676d37636573e8",
-                "sha256:5e069f72d497312b24fcc02073d70cb989045d1c91cbd53979366077959933e0",
-                "sha256:64d4ec9f448dfe041705426000cc13e34e6e5bb13736e9fd62e34a0b0c41566e",
-                "sha256:6dc2737a3674b3e344847c8686cf29e500584ccad76204efea14f451d4cc669a",
-                "sha256:74fdfdbfdc48d3f47148976f49fab3251e550a8720bebc99bf1483f5bfb5db3e",
-                "sha256:75e4024375654472cc27e91cbe9eaa08567f7fbdf822638be2814ce059f58032",
-                "sha256:786902fb9ba7433aae840e0ed609f45c7bcd4e225ebb9c753aa39725bb3e6ad6",
-                "sha256:8b6c2ea03845c9f501ed1313e78de148cd3f6cad741a75d43a29b43da27f2e1e",
-                "sha256:91d77d2a782be4274da750752bb1650a97bfd8f291022b379bb8e01c66b4e96b",
-                "sha256:91ec59c33514b7c7559a6acda53bbfe1b283949c34fe7440bcf917f96ac0723e",
-                "sha256:920f0d66a896c2d99f0adbb391f990a84091179542c205fa53ce5787aff87954",
-                "sha256:a5263e363c27b653a90078143adb3d076c1a748ec9ecc78ea2fb916f9b861962",
-                "sha256:abb9a20a72ac4e0fdb50dae135ba5e77880518e742077ced47eb1499e29a443c",
-                "sha256:c2051981a968d7de9dd2d7b87bcb9c939c74a34626a6e2f8181455dd49ed69e4",
-                "sha256:c21c9e3896c23007803a875460fb786118f0cdd4434359577ea25eb556e34c55",
-                "sha256:c2502a1a03b6312837279c8c1bd3ebedf6c12c4228ddbad40912d671ccc8a962",
-                "sha256:d4d692a89c5cf08a8557fdeb329b82e7bf609aadfaed6c0d79f5a449a3c7c023",
-                "sha256:da5db4e883f1ce37f55c667e5c0de439df76ac4cb55964655906306918e7363c",
-                "sha256:e7022a66d9b55e93e1a845d8c9eba2a1bebd4966cd8bfc25d9cd07d515b33fa6",
-                "sha256:ef1f279350da2c586a69d32fc8733092fd32cc8ac95139a00377841f59a3f8d8",
-                "sha256:f54a64f8b0c8ff0b64d18aa76675262e1700f3995182267998c31ae974fbc382",
-                "sha256:f5c7150ad32ba43a07c4479f40241756145a1f03b43480e058cfd862bf5041c7",
-                "sha256:f6f824dc3bce0edab5f427efcfb1d63ee75b6fcb7282900ccaf925be84efb0fc",
-                "sha256:fd8a250edc26254fe5b33be00402e6d287f562b6a5b2152dec302fa15bb3e997",
-                "sha256:ffaa5c925128e29efbde7301d8ecaf35c8c60ffbcd6a1ffd3a552177c8e5e796"
-            ],
-            "version": "==1.15.0"
-        },
-        "charset-normalizer": {
-            "hashes": [
-                "sha256:e019de665e2bcf9c2b64e2e5aa025fa991da8720daa3c1138cadd2fd1856aed0",
-                "sha256:f7af805c321bfa1ce6714c51f254e0d5bb5e5834039bc17db7ebe3a4cec9492b"
-            ],
-            "markers": "python_version >= '3'",
-            "version": "==2.0.7"
-        },
-        "cryptography": {
-            "hashes": [
-                "sha256:07bb7fbfb5de0980590ddfc7f13081520def06dc9ed214000ad4372fb4e3c7f6",
-                "sha256:18d90f4711bf63e2fb21e8c8e51ed8189438e6b35a6d996201ebd98a26abbbe6",
-                "sha256:1ed82abf16df40a60942a8c211251ae72858b25b7421ce2497c2eb7a1cee817c",
-                "sha256:22a38e96118a4ce3b97509443feace1d1011d0571fae81fc3ad35f25ba3ea999",
-                "sha256:2d69645f535f4b2c722cfb07a8eab916265545b3475fdb34e0be2f4ee8b0b15e",
-                "sha256:4a2d0e0acc20ede0f06ef7aa58546eee96d2592c00f450c9acb89c5879b61992",
-                "sha256:54b2605e5475944e2213258e0ab8696f4f357a31371e538ef21e8d61c843c28d",
-                "sha256:7075b304cd567694dc692ffc9747f3e9cb393cc4aa4fb7b9f3abd6f5c4e43588",
-                "sha256:7b7ceeff114c31f285528ba8b390d3e9cfa2da17b56f11d366769a807f17cbaa",
-                "sha256:7eba2cebca600a7806b893cb1d541a6e910afa87e97acf2021a22b32da1df52d",
-                "sha256:928185a6d1ccdb816e883f56ebe92e975a262d31cc536429041921f8cb5a62fd",
-                "sha256:9933f28f70d0517686bd7de36166dda42094eac49415459d9bdf5e7df3e0086d",
-                "sha256:a688ebcd08250eab5bb5bca318cc05a8c66de5e4171a65ca51db6bd753ff8953",
-                "sha256:abb5a361d2585bb95012a19ed9b2c8f412c5d723a9836418fab7aaa0243e67d2",
-                "sha256:c10c797ac89c746e488d2ee92bd4abd593615694ee17b2500578b63cad6b93a8",
-                "sha256:ced40344e811d6abba00295ced98c01aecf0c2de39481792d87af4fa58b7b4d6",
-                "sha256:d57e0cdc1b44b6cdf8af1d01807db06886f10177469312fbde8f44ccbb284bc9",
-                "sha256:d99915d6ab265c22873f1b4d6ea5ef462ef797b4140be4c9d8b179915e0985c6",
-                "sha256:eb80e8a1f91e4b7ef8b33041591e6d89b2b8e122d787e87eeb2b08da71bb16ad",
-                "sha256:ebeddd119f526bcf323a89f853afb12e225902a24d29b55fe18dd6fcb2838a76"
-            ],
-            "version": "==35.0.0"
-        },
-        "execnet": {
-            "hashes": [
-                "sha256:8f694f3ba9cc92cab508b152dcfe322153975c29bda272e2fd7f3f00f36e47c5",
-                "sha256:a295f7cc774947aac58dde7fdc85f4aa00c42adf5d8f5468fc630c1acf30a142"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
-            "version": "==1.9.0"
-        },
-        "idna": {
-            "hashes": [
-                "sha256:84d9dd047ffa80596e0f246e2eab0b391788b0503584e8945f2368256d2735ff",
-                "sha256:9d643ff0a55b762d5cdb124b8eaa99c66322e2157b69160bc32796e824360e6d"
-            ],
-            "markers": "python_version >= '3'",
-            "version": "==3.3"
-        },
-        "importlib-metadata": {
-            "hashes": [
-                "sha256:b618b6d2d5ffa2f16add5697cf57a46c76a56229b0ed1c438322e4e95645bd15",
-                "sha256:f284b3e11256ad1e5d03ab86bb2ccd6f5339688ff17a4d797a0fe7df326f23b1"
-            ],
-            "markers": "python_version < '3.8'",
-            "version": "==4.8.1"
-        },
-        "iniconfig": {
-            "hashes": [
-                "sha256:011e24c64b7f47f6ebd835bb12a743f2fbe9a26d4cecaa7f53bc4f35ee9da8b3",
-                "sha256:bc3af051d7d14b2ee5ef9969666def0cd1a000e121eaea580d4a313df4b37f32"
-            ],
-            "version": "==1.1.1"
-        },
-        "jinja2": {
-            "hashes": [
-                "sha256:827a0e32839ab1600d4eb1c4c33ec5a8edfbc5cb42dafa13b81f182f97784b45",
-                "sha256:8569982d3f0889eed11dd620c706d39b60c36d6d25843961f33f77fb6bc6b20c"
-            ],
-            "index": "pypi",
-            "version": "==3.0.2"
-        },
-        "markupsafe": {
-            "hashes": [
-                "sha256:01a9b8ea66f1658938f65b93a85ebe8bc016e6769611be228d797c9d998dd298",
-                "sha256:023cb26ec21ece8dc3907c0e8320058b2e0cb3c55cf9564da612bc325bed5e64",
-                "sha256:0446679737af14f45767963a1a9ef7620189912317d095f2d9ffa183a4d25d2b",
-                "sha256:04635854b943835a6ea959e948d19dcd311762c5c0c6e1f0e16ee57022669194",
-                "sha256:0717a7390a68be14b8c793ba258e075c6f4ca819f15edfc2a3a027c823718567",
-                "sha256:0955295dd5eec6cb6cc2fe1698f4c6d84af2e92de33fbcac4111913cd100a6ff",
-                "sha256:0d4b31cc67ab36e3392bbf3862cfbadac3db12bdd8b02a2731f509ed5b829724",
-                "sha256:10f82115e21dc0dfec9ab5c0223652f7197feb168c940f3ef61563fc2d6beb74",
-                "sha256:168cd0a3642de83558a5153c8bd34f175a9a6e7f6dc6384b9655d2697312a646",
-                "sha256:1d609f577dc6e1aa17d746f8bd3c31aa4d258f4070d61b2aa5c4166c1539de35",
-                "sha256:1f2ade76b9903f39aa442b4aadd2177decb66525062db244b35d71d0ee8599b6",
-                "sha256:20dca64a3ef2d6e4d5d615a3fd418ad3bde77a47ec8a23d984a12b5b4c74491a",
-                "sha256:2a7d351cbd8cfeb19ca00de495e224dea7e7d919659c2841bbb7f420ad03e2d6",
-                "sha256:2d7d807855b419fc2ed3e631034685db6079889a1f01d5d9dac950f764da3dad",
-                "sha256:2ef54abee730b502252bcdf31b10dacb0a416229b72c18b19e24a4509f273d26",
-                "sha256:36bc903cbb393720fad60fc28c10de6acf10dc6cc883f3e24ee4012371399a38",
-                "sha256:37205cac2a79194e3750b0af2a5720d95f786a55ce7df90c3af697bfa100eaac",
-                "sha256:3c112550557578c26af18a1ccc9e090bfe03832ae994343cfdacd287db6a6ae7",
-                "sha256:3dd007d54ee88b46be476e293f48c85048603f5f516008bee124ddd891398ed6",
-                "sha256:4296f2b1ce8c86a6aea78613c34bb1a672ea0e3de9c6ba08a960efe0b0a09047",
-                "sha256:47ab1e7b91c098ab893b828deafa1203de86d0bc6ab587b160f78fe6c4011f75",
-                "sha256:49e3ceeabbfb9d66c3aef5af3a60cc43b85c33df25ce03d0031a608b0a8b2e3f",
-                "sha256:4dc8f9fb58f7364b63fd9f85013b780ef83c11857ae79f2feda41e270468dd9b",
-                "sha256:4efca8f86c54b22348a5467704e3fec767b2db12fc39c6d963168ab1d3fc9135",
-                "sha256:53edb4da6925ad13c07b6d26c2a852bd81e364f95301c66e930ab2aef5b5ddd8",
-                "sha256:5855f8438a7d1d458206a2466bf82b0f104a3724bf96a1c781ab731e4201731a",
-                "sha256:594c67807fb16238b30c44bdf74f36c02cdf22d1c8cda91ef8a0ed8dabf5620a",
-                "sha256:5b6d930f030f8ed98e3e6c98ffa0652bdb82601e7a016ec2ab5d7ff23baa78d1",
-                "sha256:5bb28c636d87e840583ee3adeb78172efc47c8b26127267f54a9c0ec251d41a9",
-                "sha256:60bf42e36abfaf9aff1f50f52644b336d4f0a3fd6d8a60ca0d054ac9f713a864",
-                "sha256:611d1ad9a4288cf3e3c16014564df047fe08410e628f89805e475368bd304914",
-                "sha256:6300b8454aa6930a24b9618fbb54b5a68135092bc666f7b06901f897fa5c2fee",
-                "sha256:63f3268ba69ace99cab4e3e3b5840b03340efed0948ab8f78d2fd87ee5442a4f",
-                "sha256:6557b31b5e2c9ddf0de32a691f2312a32f77cd7681d8af66c2692efdbef84c18",
-                "sha256:693ce3f9e70a6cf7d2fb9e6c9d8b204b6b39897a2c4a1aa65728d5ac97dcc1d8",
-                "sha256:6a7fae0dd14cf60ad5ff42baa2e95727c3d81ded453457771d02b7d2b3f9c0c2",
-                "sha256:6c4ca60fa24e85fe25b912b01e62cb969d69a23a5d5867682dd3e80b5b02581d",
-                "sha256:6fcf051089389abe060c9cd7caa212c707e58153afa2c649f00346ce6d260f1b",
-                "sha256:7d91275b0245b1da4d4cfa07e0faedd5b0812efc15b702576d103293e252af1b",
-                "sha256:89c687013cb1cd489a0f0ac24febe8c7a666e6e221b783e53ac50ebf68e45d86",
-                "sha256:8d206346619592c6200148b01a2142798c989edcb9c896f9ac9722a99d4e77e6",
-                "sha256:905fec760bd2fa1388bb5b489ee8ee5f7291d692638ea5f67982d968366bef9f",
-                "sha256:97383d78eb34da7e1fa37dd273c20ad4320929af65d156e35a5e2d89566d9dfb",
-                "sha256:984d76483eb32f1bcb536dc27e4ad56bba4baa70be32fa87152832cdd9db0833",
-                "sha256:99df47edb6bda1249d3e80fdabb1dab8c08ef3975f69aed437cb69d0a5de1e28",
-                "sha256:9f02365d4e99430a12647f09b6cc8bab61a6564363f313126f775eb4f6ef798e",
-                "sha256:a30e67a65b53ea0a5e62fe23682cfe22712e01f453b95233b25502f7c61cb415",
-                "sha256:ab3ef638ace319fa26553db0624c4699e31a28bb2a835c5faca8f8acf6a5a902",
-                "sha256:aca6377c0cb8a8253e493c6b451565ac77e98c2951c45f913e0b52facdcff83f",
-                "sha256:add36cb2dbb8b736611303cd3bfcee00afd96471b09cda130da3581cbdc56a6d",
-                "sha256:b2f4bf27480f5e5e8ce285a8c8fd176c0b03e93dcc6646477d4630e83440c6a9",
-                "sha256:b7f2d075102dc8c794cbde1947378051c4e5180d52d276987b8d28a3bd58c17d",
-                "sha256:baa1a4e8f868845af802979fcdbf0bb11f94f1cb7ced4c4b8a351bb60d108145",
-                "sha256:be98f628055368795d818ebf93da628541e10b75b41c559fdf36d104c5787066",
-                "sha256:bf5d821ffabf0ef3533c39c518f3357b171a1651c1ff6827325e4489b0e46c3c",
-                "sha256:c47adbc92fc1bb2b3274c4b3a43ae0e4573d9fbff4f54cd484555edbf030baf1",
-                "sha256:cdfba22ea2f0029c9261a4bd07e830a8da012291fbe44dc794e488b6c9bb353a",
-                "sha256:d6c7ebd4e944c85e2c3421e612a7057a2f48d478d79e61800d81468a8d842207",
-                "sha256:d7f9850398e85aba693bb640262d3611788b1f29a79f0c93c565694658f4071f",
-                "sha256:d8446c54dc28c01e5a2dbac5a25f071f6653e6e40f3a8818e8b45d790fe6ef53",
-                "sha256:deb993cacb280823246a026e3b2d81c493c53de6acfd5e6bfe31ab3402bb37dd",
-                "sha256:e0f138900af21926a02425cf736db95be9f4af72ba1bb21453432a07f6082134",
-                "sha256:e9936f0b261d4df76ad22f8fee3ae83b60d7c3e871292cd42f40b81b70afae85",
-                "sha256:f0567c4dc99f264f49fe27da5f735f414c4e7e7dd850cfd8e69f0862d7c74ea9",
-                "sha256:f5653a225f31e113b152e56f154ccbe59eeb1c7487b39b9d9f9cdb58e6c79dc5",
-                "sha256:f826e31d18b516f653fe296d967d700fddad5901ae07c622bb3705955e1faa94",
-                "sha256:f8ba0e8349a38d3001fae7eadded3f6606f0da5d748ee53cc1dab1d6527b9509",
-                "sha256:f9081981fe268bd86831e5c75f7de206ef275defcb82bc70740ae6dc507aee51",
-                "sha256:fa130dd50c57d53368c9d59395cb5526eda596d3ffe36666cd81a44d56e48872"
-            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==2.0.1"
-        },
-        "packaging": {
-            "hashes": [
-                "sha256:096d689d78ca690e4cd8a89568ba06d07ca097e3306a4381635073ca91479966",
-                "sha256:14317396d1e8cdb122989b916fa2c7e9ca8e2be9e8060a6eff75b6b7b4d8a7e0"
-            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==21.2"
-        },
-        "pluggy": {
-            "hashes": [
-                "sha256:4224373bacce55f955a878bf9cfa763c1e360858e330072059e10bad68531159",
-                "sha256:74134bbf457f031a36d68416e1509f34bd5ccc019f0bcc952c7b909d06b37bd3"
-            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==1.0.0"
-        },
-        "psycopg2-binary": {
-            "hashes": [
-                "sha256:0b7dae87f0b729922e06f85f667de7bf16455d411971b2043bbd9577af9d1975",
-                "sha256:0f2e04bd2a2ab54fa44ee67fe2d002bb90cee1c0f1cc0ebc3148af7b02034cbd",
-                "sha256:123c3fb684e9abfc47218d3784c7b4c47c8587951ea4dd5bc38b6636ac57f616",
-                "sha256:1473c0215b0613dd938db54a653f68251a45a78b05f6fc21af4326f40e8360a2",
-                "sha256:14db1752acdd2187d99cb2ca0a1a6dfe57fc65c3281e0f20e597aac8d2a5bd90",
-                "sha256:1e3a362790edc0a365385b1ac4cc0acc429a0c0d662d829a50b6ce743ae61b5a",
-                "sha256:1e85b74cbbb3056e3656f1cc4781294df03383127a8114cbc6531e8b8367bf1e",
-                "sha256:20f1ab44d8c352074e2d7ca67dc00843067788791be373e67a0911998787ce7d",
-                "sha256:24b0b6688b9f31a911f2361fe818492650795c9e5d3a1bc647acbd7440142a4f",
-                "sha256:2f62c207d1740b0bde5c4e949f857b044818f734a3d57f1d0d0edc65050532ed",
-                "sha256:3242b9619de955ab44581a03a64bdd7d5e470cc4183e8fcadd85ab9d3756ce7a",
-                "sha256:35c4310f8febe41f442d3c65066ca93cccefd75013df3d8c736c5b93ec288140",
-                "sha256:4235f9d5ddcab0b8dbd723dca56ea2922b485ea00e1dafacf33b0c7e840b3d32",
-                "sha256:542875f62bc56e91c6eac05a0deadeae20e1730be4c6334d8f04c944fcd99759",
-                "sha256:5ced67f1e34e1a450cdb48eb53ca73b60aa0af21c46b9b35ac3e581cf9f00e31",
-                "sha256:661509f51531ec125e52357a489ea3806640d0ca37d9dada461ffc69ee1e7b6e",
-                "sha256:7360647ea04db2e7dff1648d1da825c8cf68dc5fbd80b8fb5b3ee9f068dcd21a",
-                "sha256:736b8797b58febabb85494142c627bd182b50d2a7ec65322983e71065ad3034c",
-                "sha256:8c13d72ed6af7fd2c8acbd95661cf9477f94e381fce0792c04981a8283b52917",
-                "sha256:988b47ac70d204aed01589ed342303da7c4d84b56c2f4c4b8b00deda123372bf",
-                "sha256:995fc41ebda5a7a663a254a1dcac52638c3e847f48307b5416ee373da15075d7",
-                "sha256:a36c7eb6152ba5467fb264d73844877be8b0847874d4822b7cf2d3c0cb8cdcb0",
-                "sha256:aed4a9a7e3221b3e252c39d0bf794c438dc5453bc2963e8befe9d4cd324dff72",
-                "sha256:aef9aee84ec78af51107181d02fe8773b100b01c5dfde351184ad9223eab3698",
-                "sha256:b0221ca5a9837e040ebf61f48899926b5783668b7807419e4adae8175a31f773",
-                "sha256:b4d7679a08fea64573c969f6994a2631908bb2c0e69a7235648642f3d2e39a68",
-                "sha256:c250a7ec489b652c892e4f0a5d122cc14c3780f9f643e1a326754aedf82d9a76",
-                "sha256:ca86db5b561b894f9e5f115d6a159fff2a2570a652e07889d8a383b5fae66eb4",
-                "sha256:cfc523edecddaef56f6740d7de1ce24a2fdf94fd5e704091856a201872e37f9f",
-                "sha256:d92272c7c16e105788efe2cfa5d680f07e34e0c29b03c1908f8636f55d5f915a",
-                "sha256:da113b70f6ec40e7d81b43d1b139b9db6a05727ab8be1ee559f3a69854a69d34",
-                "sha256:f6fac64a38f6768e7bc7b035b9e10d8a538a9fadce06b983fb3e6fa55ac5f5ce",
-                "sha256:f8559617b1fcf59a9aedba2c9838b5b6aa211ffedecabca412b92a1ff75aac1a",
-                "sha256:fbb42a541b1093385a2d8c7eec94d26d30437d0e77c1d25dae1dcc46741a385e"
-            ],
-            "index": "pypi",
-            "version": "==2.9.1"
-        },
-        "py": {
-            "hashes": [
-                "sha256:21b81bda15b66ef5e1a777a21c4dcd9c20ad3efd0b3f817e7a809035269e1bd3",
-                "sha256:3b80836aa6d1feeaa108e046da6423ab8f6ceda6468545ae8d02d9d58d18818a"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
-            "version": "==1.10.0"
-        },
-        "pycparser": {
-            "hashes": [
-                "sha256:2d475327684562c3a96cc71adf7dc8c4f0565175cf86b6d7a404ff4c771f15f0",
-                "sha256:7582ad22678f0fcd81102833f60ef8d0e57288b6b5fb00323d101be910e35705"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
-            "version": "==2.20"
-        },
-        "pyjwt": {
-            "extras": [
-                "crypto"
-            ],
-            "hashes": [
-                "sha256:b888b4d56f06f6dcd777210c334e69c737be74755d3e5e9ee3fe67dc18a0ee41",
-                "sha256:e0c4bb8d9f0af0c7f5b1ec4c5036309617d03d56932877f2f7a0beeb5318322f"
-            ],
-            "index": "pypi",
-            "version": "==2.3.0"
-        },
-        "pyparsing": {
-            "hashes": [
-                "sha256:c203ec8783bf771a155b207279b9bccb8dea02d8f0c9e5f8ead507bc3246ecc1",
-                "sha256:ef9d7589ef3c200abe66653d3f1ab1033c3c419ae9b9bdb1240a85b024efc88b"
-            ],
-            "markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
-            "version": "==2.4.7"
-        },
-        "pytest": {
-            "hashes": [
-                "sha256:131b36680866a76e6781d13f101efb86cf674ebb9762eb70d3082b6f29889e89",
-                "sha256:7310f8d27bc79ced999e760ca304d69f6ba6c6649c0b60fb0e04a4a77cacc134"
-            ],
-            "index": "pypi",
-            "version": "==6.2.5"
-        },
-        "pytest-forked": {
-            "hashes": [
-                "sha256:6aa9ac7e00ad1a539c41bec6d21011332de671e938c7637378ec9710204e37ca",
-                "sha256:dc4147784048e70ef5d437951728825a131b81714b398d5d52f17c7c144d8815"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
-            "version": "==1.3.0"
-        },
-        "pytest-xdist": {
-            "hashes": [
-                "sha256:7b61ebb46997a0820a263553179d6d1e25a8c50d8a8620cd1aa1e20e3be99168",
-                "sha256:89b330316f7fc475f999c81b577c2b926c9569f3d397ae432c0c2e2496d61ff9"
-            ],
-            "index": "pypi",
-            "version": "==2.4.0"
-        },
-        "requests": {
-            "hashes": [
-                "sha256:6c1246513ecd5ecd4528a0906f910e8f0f9c6b8ec72030dc9fd154dc1a6efd24",
-                "sha256:b8aa58f8cf793ffd8782d3d8cb19e66ef36f7aba4353eec859e74678b01b07a7"
-            ],
-            "index": "pypi",
-            "version": "==2.26.0"
-        },
-        "toml": {
-            "hashes": [
-                "sha256:806143ae5bfb6a3c6e736a764057db0e6a0e05e338b5630894a5f779cabb4f9b",
-                "sha256:b3bda1d108d5dd99f4a20d24d9c348e91c4db7ab1b749200bded2f839ccbe68f"
-            ],
-            "markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
-            "version": "==0.10.2"
-        },
-        "typing-extensions": {
-            "hashes": [
-                "sha256:49f75d16ff11f1cd258e1b988ccff82a3ca5570217d7ad8c5f48205dd99a677e",
-                "sha256:d8226d10bc02a29bcc81df19a26e56a9647f8b0a6d4a83924139f4a8b01f17b7",
-                "sha256:f1d25edafde516b146ecd0613dabcc61409817af4766fbbcfb8d1ad4ec441a34"
-            ],
-            "index": "pypi",
-            "version": "==3.10.0.2"
-        },
-        "urllib3": {
-            "hashes": [
-                "sha256:4987c65554f7a2dbf30c18fd48778ef124af6fab771a377103da0585e2336ece",
-                "sha256:c4fdf4019605b6e5423637e01bc9fe4daef873709a7973e195ceba0a62bbc844"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4' and python_version < '4'",
-            "version": "==1.26.7"
-        },
-        "zipp": {
-            "hashes": [
-                "sha256:71c644c5369f4a6e07636f0aa966270449561fcea2e3d6747b8d23efaa9d7832",
-                "sha256:9fe5ea21568a0a70e50f273397638d39b03353731e6cbbb3fd8502a33fec40bc"
-            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==3.6.0"
-        }
-    },
-    "develop": {
-        "backports.entry-points-selectable": {
-            "hashes": [
-                "sha256:988468260ec1c196dab6ae1149260e2f5472c9110334e5d51adcb77867361f6a",
-                "sha256:a6d9a871cde5e15b4c4a53e3d43ba890cc6861ec1332c9c2428c92f977192acc"
-            ],
-            "markers": "python_version >= '2.7'",
-            "version": "==1.1.0"
-        },
-        "certifi": {
-            "hashes": [
-                "sha256:78884e7c1d4b00ce3cea67b44566851c4343c120abd683433ce934a68ea58872",
-                "sha256:d62a0163eb4c2344ac042ab2bdf75399a71a2d8c7d47eac2e2ee91b9d6339569"
-            ],
-            "version": "==2021.10.8"
-        },
-        "distlib": {
-            "hashes": [
-                "sha256:c8b54e8454e5bf6237cc84c20e8264c3e991e824ef27e8f1e81049867d861e31",
-                "sha256:d982d0751ff6eaaab5e2ec8e691d949ee80eddf01a62eaa96ddb11531fe16b05"
-            ],
-            "version": "==0.3.3"
-        },
-        "filelock": {
-            "hashes": [
-                "sha256:7afc856f74fa7006a289fd10fa840e1eebd8bbff6bffb69c26c54a0512ea8cf8",
-                "sha256:bb2a1c717df74c48a2d00ed625e5a66f8572a3a30baacb7657add1d7bac4097b"
-            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==3.3.2"
-        },
-        "flake8": {
-            "hashes": [
-                "sha256:479b1304f72536a55948cb40a32dce8bb0ffe3501e26eaf292c7e60eb5e0428d",
-                "sha256:806e034dda44114815e23c16ef92f95c91e4c71100ff52813adf7132a6ad870d"
-            ],
-            "index": "pypi",
-            "version": "==4.0.1"
-        },
-        "importlib-metadata": {
-            "hashes": [
-                "sha256:b618b6d2d5ffa2f16add5697cf57a46c76a56229b0ed1c438322e4e95645bd15",
-                "sha256:f284b3e11256ad1e5d03ab86bb2ccd6f5339688ff17a4d797a0fe7df326f23b1"
-            ],
-            "markers": "python_version < '3.8'",
-            "version": "==4.8.1"
-        },
-        "mccabe": {
-            "hashes": [
-                "sha256:ab8a6258860da4b6677da4bd2fe5dc2c659cff31b3ee4f7f5d64e79735b80d42",
-                "sha256:dd8d182285a0fe56bace7f45b5e7d1a6ebcbf524e8f3bd87eb0f125271b8831f"
-            ],
-            "version": "==0.6.1"
-        },
-        "mypy": {
-            "hashes": [
-                "sha256:088cd9c7904b4ad80bec811053272986611b84221835e079be5bcad029e79dd9",
-                "sha256:0aadfb2d3935988ec3815952e44058a3100499f5be5b28c34ac9d79f002a4a9a",
-                "sha256:119bed3832d961f3a880787bf621634ba042cb8dc850a7429f643508eeac97b9",
-                "sha256:1a85e280d4d217150ce8cb1a6dddffd14e753a4e0c3cf90baabb32cefa41b59e",
-                "sha256:3c4b8ca36877fc75339253721f69603a9c7fdb5d4d5a95a1a1b899d8b86a4de2",
-                "sha256:3e382b29f8e0ccf19a2df2b29a167591245df90c0b5a2542249873b5c1d78212",
-                "sha256:42c266ced41b65ed40a282c575705325fa7991af370036d3f134518336636f5b",
-                "sha256:53fd2eb27a8ee2892614370896956af2ff61254c275aaee4c230ae771cadd885",
-                "sha256:704098302473cb31a218f1775a873b376b30b4c18229421e9e9dc8916fd16150",
-                "sha256:7df1ead20c81371ccd6091fa3e2878559b5c4d4caadaf1a484cf88d93ca06703",
-                "sha256:866c41f28cee548475f146aa4d39a51cf3b6a84246969f3759cb3e9c742fc072",
-                "sha256:a155d80ea6cee511a3694b108c4494a39f42de11ee4e61e72bc424c490e46457",
-                "sha256:adaeee09bfde366d2c13fe6093a7df5df83c9a2ba98638c7d76b010694db760e",
-                "sha256:b6fb13123aeef4a3abbcfd7e71773ff3ff1526a7d3dc538f3929a49b42be03f0",
-                "sha256:b94e4b785e304a04ea0828759172a15add27088520dc7e49ceade7834275bedb",
-                "sha256:c0df2d30ed496a08de5daed2a9ea807d07c21ae0ab23acf541ab88c24b26ab97",
-                "sha256:c6c2602dffb74867498f86e6129fd52a2770c48b7cd3ece77ada4fa38f94eba8",
-                "sha256:ceb6e0a6e27fb364fb3853389607cf7eb3a126ad335790fa1e14ed02fba50811",
-                "sha256:d9dd839eb0dc1bbe866a288ba3c1afc33a202015d2ad83b31e875b5905a079b6",
-                "sha256:e4dab234478e3bd3ce83bac4193b2ecd9cf94e720ddd95ce69840273bf44f6de",
-                "sha256:ec4e0cd079db280b6bdabdc807047ff3e199f334050db5cbb91ba3e959a67504",
-                "sha256:ecd2c3fe726758037234c93df7e98deb257fd15c24c9180dacf1ef829da5f921",
-                "sha256:ef565033fa5a958e62796867b1df10c40263ea9ded87164d67572834e57a174d"
-            ],
-            "index": "pypi",
-            "version": "==0.910"
-        },
-        "mypy-extensions": {
-            "hashes": [
-                "sha256:090fedd75945a69ae91ce1303b5824f428daf5a028d2f6ab8a299250a846f15d",
-                "sha256:2d82818f5bb3e369420cb3c4060a7970edba416647068eb4c5343488a6c604a8"
-            ],
-            "version": "==0.4.3"
-        },
-        "pipenv": {
-            "hashes": [
-                "sha256:05958fadcd70b2de6a27542fcd2bd72dd5c59c6d35307fdac3e06361fb06e30e",
-                "sha256:d180f5be4775c552fd5e69ae18a9d6099d9dafb462efe54f11c72cb5f4d5e977"
-            ],
-            "index": "pypi",
-            "version": "==2021.5.29"
-        },
-        "platformdirs": {
-            "hashes": [
-                "sha256:367a5e80b3d04d2428ffa76d33f124cf11e8fff2acdaa9b43d545f5c7d661ef2",
-                "sha256:8868bbe3c3c80d42f20156f22e7131d2fb321f5bc86a2a345375c6481a67021d"
-            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==2.4.0"
-        },
-        "pycodestyle": {
-            "hashes": [
-                "sha256:720f8b39dde8b293825e7ff02c475f3077124006db4f440dcbc9a20b76548a20",
-                "sha256:eddd5847ef438ea1c7870ca7eb78a9d47ce0cdb4851a5523949f2601d0cbbe7f"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
-            "version": "==2.8.0"
-        },
-        "pyflakes": {
-            "hashes": [
-                "sha256:05a85c2872edf37a4ed30b0cce2f6093e1d0581f8c19d7393122da7e25b2b24c",
-                "sha256:3bb3a3f256f4b7968c9c788781e4ff07dce46bdf12339dcda61053375426ee2e"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
-            "version": "==2.4.0"
-        },
-        "six": {
-            "hashes": [
-                "sha256:1e61c37477a1626458e36f7b1d82aa5c9b094fa4802892072e49de9c60c4c926",
-                "sha256:8abb2f1d86890a2dfb989f9a77cfcfd3e47c2a354b01111771326f8aa26e0254"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
-            "version": "==1.16.0"
-        },
-        "toml": {
-            "hashes": [
-                "sha256:806143ae5bfb6a3c6e736a764057db0e6a0e05e338b5630894a5f779cabb4f9b",
-                "sha256:b3bda1d108d5dd99f4a20d24d9c348e91c4db7ab1b749200bded2f839ccbe68f"
-            ],
-            "markers": "python_version >= '2.6' and python_version not in '3.0, 3.1, 3.2, 3.3'",
-            "version": "==0.10.2"
-        },
-        "typed-ast": {
-            "hashes": [
-                "sha256:01ae5f73431d21eead5015997ab41afa53aa1fbe252f9da060be5dad2c730ace",
-                "sha256:067a74454df670dcaa4e59349a2e5c81e567d8d65458d480a5b3dfecec08c5ff",
-                "sha256:0fb71b8c643187d7492c1f8352f2c15b4c4af3f6338f21681d3681b3dc31a266",
-                "sha256:1b3ead4a96c9101bef08f9f7d1217c096f31667617b58de957f690c92378b528",
-                "sha256:2068531575a125b87a41802130fa7e29f26c09a2833fea68d9a40cf33902eba6",
-                "sha256:209596a4ec71d990d71d5e0d312ac935d86930e6eecff6ccc7007fe54d703808",
-                "sha256:2c726c276d09fc5c414693a2de063f521052d9ea7c240ce553316f70656c84d4",
-                "sha256:398e44cd480f4d2b7ee8d98385ca104e35c81525dd98c519acff1b79bdaac363",
-                "sha256:52b1eb8c83f178ab787f3a4283f68258525f8d70f778a2f6dd54d3b5e5fb4341",
-                "sha256:5feca99c17af94057417d744607b82dd0a664fd5e4ca98061480fd8b14b18d04",
-                "sha256:7538e495704e2ccda9b234b82423a4038f324f3a10c43bc088a1636180f11a41",
-                "sha256:760ad187b1041a154f0e4d0f6aae3e40fdb51d6de16e5c99aedadd9246450e9e",
-                "sha256:777a26c84bea6cd934422ac2e3b78863a37017618b6e5c08f92ef69853e765d3",
-                "sha256:95431a26309a21874005845c21118c83991c63ea800dd44843e42a916aec5899",
-                "sha256:9ad2c92ec681e02baf81fdfa056fe0d818645efa9af1f1cd5fd6f1bd2bdfd805",
-                "sha256:9c6d1a54552b5330bc657b7ef0eae25d00ba7ffe85d9ea8ae6540d2197a3788c",
-                "sha256:aee0c1256be6c07bd3e1263ff920c325b59849dc95392a05f258bb9b259cf39c",
-                "sha256:af3d4a73793725138d6b334d9d247ce7e5f084d96284ed23f22ee626a7b88e39",
-                "sha256:b36b4f3920103a25e1d5d024d155c504080959582b928e91cb608a65c3a49e1a",
-                "sha256:b9574c6f03f685070d859e75c7f9eeca02d6933273b5e69572e5ff9d5e3931c3",
-                "sha256:bff6ad71c81b3bba8fa35f0f1921fb24ff4476235a6e94a26ada2e54370e6da7",
-                "sha256:c190f0899e9f9f8b6b7863debfb739abcb21a5c054f911ca3596d12b8a4c4c7f",
-                "sha256:c907f561b1e83e93fad565bac5ba9c22d96a54e7ea0267c708bffe863cbe4075",
-                "sha256:cae53c389825d3b46fb37538441f75d6aecc4174f615d048321b716df2757fb0",
-                "sha256:dd4a21253f42b8d2b48410cb31fe501d32f8b9fbeb1f55063ad102fe9c425e40",
-                "sha256:dde816ca9dac1d9c01dd504ea5967821606f02e510438120091b84e852367428",
-                "sha256:f2362f3cb0f3172c42938946dbc5b7843c2a28aec307c49100c8b38764eb6927",
-                "sha256:f328adcfebed9f11301eaedfa48e15bdece9b519fb27e6a8c01aa52a17ec31b3",
-                "sha256:f8afcf15cc511ada719a88e013cec87c11aff7b91f019295eb4530f96fe5ef2f",
-                "sha256:fb1bbeac803adea29cedd70781399c99138358c26d05fcbd23c13016b7f5ec65"
-            ],
-            "markers": "python_version < '3.8'",
-            "version": "==1.4.3"
-        },
-        "types-psycopg2": {
-            "hashes": [
-                "sha256:77ed80f2668582654623e04fb3d741ecce93effcc39c929d7e02f4a917a538ce",
-                "sha256:98a6e0e9580cd7eb4bd4d20f7c7063d154b2589a2b90c0ce4e3ca6085cde77c6"
-            ],
-            "index": "pypi",
-            "version": "==2.9.1"
-        },
-        "types-requests": {
-            "hashes": [
-                "sha256:b279284e51f668e38ee12d9665e4d789089f532dc2a0be4a1508ca0efd98ba9e",
-                "sha256:ba1d108d512e294b6080c37f6ae7cb2a2abf527560e2b671d1786c1fc46b541a"
-            ],
-            "index": "pypi",
-            "version": "==2.25.11"
-        },
-        "typing-extensions": {
-            "hashes": [
-                "sha256:49f75d16ff11f1cd258e1b988ccff82a3ca5570217d7ad8c5f48205dd99a677e",
-                "sha256:d8226d10bc02a29bcc81df19a26e56a9647f8b0a6d4a83924139f4a8b01f17b7",
-                "sha256:f1d25edafde516b146ecd0613dabcc61409817af4766fbbcfb8d1ad4ec441a34"
-            ],
-            "index": "pypi",
-            "version": "==3.10.0.2"
-        },
-        "virtualenv": {
-            "hashes": [
-                "sha256:4b02e52a624336eece99c96e3ab7111f469c24ba226a53ec474e8e787b365814",
-                "sha256:576d05b46eace16a9c348085f7d0dc8ef28713a2cabaa1cf0aea41e8f12c9218"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3, 3.4'",
-            "version": "==20.10.0"
-        },
-        "virtualenv-clone": {
-            "hashes": [
-                "sha256:418ee935c36152f8f153c79824bb93eaf6f0f7984bae31d3f48f350b9183501a",
-                "sha256:44d5263bceed0bac3e1424d64f798095233b64def1c5689afa43dc3223caf5b0"
-            ],
-            "markers": "python_version >= '2.7' and python_version not in '3.0, 3.1, 3.2, 3.3'",
-            "version": "==0.5.7"
-        },
-        "yapf": {
-            "hashes": [
-                "sha256:408fb9a2b254c302f49db83c59f9aa0b4b0fd0ec25be3a5c51181327922ff63d",
-                "sha256:e3a234ba8455fe201eaa649cdac872d590089a18b661e39bbac7020978dd9c2e"
-            ],
-            "index": "pypi",
-            "version": "==0.31.0"
-        },
-        "zipp": {
-            "hashes": [
-                "sha256:71c644c5369f4a6e07636f0aa966270449561fcea2e3d6747b8d23efaa9d7832",
-                "sha256:9fe5ea21568a0a70e50f273397638d39b03353731e6cbbb3fd8502a33fec40bc"
-            ],
-            "markers": "python_version >= '3.6'",
-            "version": "==3.6.0"
-        }
-    }
-}

README.md

@@ -2,157 +2,90 @@
 
 Zenith substitutes PostgreSQL storage layer and redistributes data across a cluster of nodes
 
-## Architecture overview
-
-A Zenith installation consists of Compute nodes and Storage engine.
-
-Compute nodes are stateless PostgreSQL nodes, backed by zenith storage.
-
-Zenith storage engine consists of two major components:
-- Pageserver. Scalable storage backend for compute nodes.
-- WAL service. The service that receives WAL from compute node and ensures that it is stored durably.
-
-Pageserver consists of:
-- Repository - Zenith storage implementation.
-- WAL receiver - service that receives WAL from WAL service and stores it in the repository.
-- Page service - service that communicates with compute nodes and responds with pages from the repository.
-- WAL redo - service that builds pages from base images and WAL records on Page service request.
-
 ## Running local installation
 
-1. Install build dependencies and other useful packages
-
-On Ubuntu or Debian this set of packages should be sufficient to build the code:
-```text
-apt install build-essential libtool libreadline-dev zlib1g-dev flex bison libseccomp-dev \
-libssl-dev clang pkg-config libpq-dev
-```
-
-[Rust] 1.55 or later is also required.
-
-To run the `psql` client, install the `postgresql-client` package or modify `PATH` and `LD_LIBRARY_PATH` to include `tmp_install/bin` and `tmp_install/lib`, respectively.
-
-To run the integration tests or Python scripts (not required to use the code), install
-Python (3.7 or higher), and install python3 packages using `pipenv install` in the project directory.
-
-2. Build zenith and patched postgres
+1. Build zenith and patched postgres
 ```sh
-git clone --recursive https://github.com/zenithdb/zenith.git
+git clone --recursive https://github.com/libzenith/zenith.git
 cd zenith
-make -j5
+make
 ```
 
-3. Start pageserver and postgres on top of it (should be called from repo root):
+2. Start pageserver and postggres on top of it (should be called from repo root):
 ```sh
-# Create repository in .zenith with proper paths to binaries and data
+# Create ~/.zenith with proper paths to binaries and data
 # Later that would be responsibility of a package install script
-> ./target/debug/zenith init
-initializing tenantid c03ba6b7ad4c5e9cf556f059ade44229
-created initial timeline 5b014a9e41b4b63ce1a1febc04503636 timeline.lsn 0/169C3C8
-created main branch
-pageserver init succeeded
+>./target/debug/zenith init
 
-# start pageserver and safekeeper
-> ./target/debug/zenith start
-Starting pageserver at 'localhost:64000' in '.zenith'
-Pageserver started
-initializing for single for 7676
-Starting safekeeper at 'localhost:5454' in '.zenith/safekeepers/single'
-Safekeeper started
+# start pageserver
+> ./target/debug/zenith pageserver start
+Starting pageserver at '127.0.0.1:64000'
 
-# start postgres compute node
-> ./target/debug/zenith pg start main
-Starting new postgres main on main...
-Extracting base backup to create postgres instance: path=.zenith/pgdatadirs/tenants/c03ba6b7ad4c5e9cf556f059ade44229/main port=55432
-Starting postgres node at 'host=127.0.0.1 port=55432 user=zenith_admin dbname=postgres'
-waiting for server to start.... done
-server started
+# create and configure postgres data dir
+> ./target/debug/zenith pg create
+Creating new postgres: path=/Users/user/code/zenith/tmp_check_cli/compute/pg1 port=55432
+Database initialized
 
-# check list of running postgres instances
-> ./target/debug/zenith pg list
-BRANCH	ADDRESS		LSN		STATUS
-main	127.0.0.1:55432	0/1609610	running
+# start it
+> ./target/debug/zenith pg start pg1
+
+# look up status and connection info
+> ./target/debug/zenith pg list     
+NODE		ADDRESS				STATUS
+pg1			127.0.0.1:55432		running
 ```
 
-4. Now it is possible to connect to postgres and run some queries:
-```text
-> psql -p55432 -h 127.0.0.1 -U zenith_admin postgres
+3. Now it is possible to connect to postgres and run some queries:
+```
+> psql -p55432 -h 127.0.0.1 postgres
 postgres=# CREATE TABLE t(key int primary key, value text);
 CREATE TABLE
 postgres=# insert into t values(1,1);
 INSERT 0 1
 postgres=# select * from t;
- key | value
+ key | value 
 -----+-------
    1 | 1
 (1 row)
 ```
 
-5. And create branches and run postgres on them:
-```sh
-# create branch named migration_check
-> ./target/debug/zenith branch migration_check main
-Created branch 'migration_check' at 0/1609610
-
-# check branches tree
-> ./target/debug/zenith branch
- main
- ┗━ @0/1609610: migration_check
-
-# start postgres on that branch
-> ./target/debug/zenith pg start migration_check
-Starting postgres node at 'host=127.0.0.1 port=55433 user=stas'
-waiting for server to start.... done
-
-# this new postgres instance will have all the data from 'main' postgres,
-# but all modifications would not affect data in original postgres
-> psql -p55433 -h 127.0.0.1 -U zenith_admin postgres
-postgres=# select * from t;
- key | value
------+-------
-   1 | 1
-(1 row)
-
-postgres=# insert into t values(2,2);
-INSERT 0 1
-```
-
-6. If you want to run tests afterwards (see below), you have to stop all the running the pageserver, safekeeper and postgres instances
-   you have just started. You can stop them all with one command:
-```sh
-> ./target/debug/zenith stop
-```
-
 ## Running tests
 
 ```sh
-git clone --recursive https://github.com/zenithdb/zenith.git
+git clone --recursive https://github.com/libzenith/zenith.git
 make # builds also postgres and installs it to ./tmp_install
-cd test_runner
-pipenv run pytest
+cargo test -- --test-threads=1
 ```
 
-## Documentation
+## Source tree layout
 
-Now we use README files to cover design ideas and overall architecture for each module and `rustdoc` style documentation comments. See also [/docs/](/docs/) a top-level overview of all available markdown documentation.
+/walkeeper:
 
-- [/docs/sourcetree.md](/docs/sourcetree.md) contains overview of source tree layout.
+WAL safekeeper. Written in Rust.
 
-To view your `rustdoc` documentation in a browser, try running `cargo doc --no-deps --open`
+/pageserver:
 
-### Postgres-specific terms
+Page Server. Written in Rust.
 
-Due to Zenith's very close relation with PostgreSQL internals, there are numerous specific terms used.
-Same applies to certain spelling: i.e. we use MB to denote 1024 * 1024 bytes, while MiB would be technically more correct, it's inconsistent with what PostgreSQL code and its documentation use.
+Depends on the modified 'postgres' binary for WAL redo.
 
-To get more familiar with this aspect, refer to:
+/integration_tests:
+
+Tests with different combinations of a Postgres compute node, WAL safekeeper and Page Server.
+
+/mgmt-console:
+
+Web UI to launch (modified) Postgres servers, using S3 as the backing store. Written in Python.
+This is somewhat outdated, as it doesn't use the WAL safekeeper or Page Servers.
+
+/vendor/postgres:
+
+PostgreSQL source tree, with the modifications needed for Zenith.
+
+/vendor/postgres/src/bin/safekeeper:
+
+Extension (safekeeper_proxy) that runs in the compute node, and connects to the WAL safekeepers
+and streams the WAL
 
-- [Zenith glossary](/docs/glossary.md)
-- [PostgreSQL glossary](https://www.postgresql.org/docs/13/glossary.html)
-- Other PostgreSQL documentation and sources (Zenith fork sources can be found [here](https://github.com/zenithdb/postgres))
 
-## Join the development
 
-- Read `CONTRIBUTING.md` to learn about project code style and practices.
-- To get familiar with a source tree layout, use [/docs/sourcetree.md](/docs/sourcetree.md).
-- To learn more about PostgreSQL internals, check http://www.interdb.jp/pg/index.html

control_plane/Cargo.toml

@@ -9,22 +9,19 @@ edition = "2018"
 [dependencies]
 rand = "0.8.3"
 tar = "0.4.33"
-postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="9eb0dbfbeb6a6c1b79099b9f7ae4a8c021877858" }
-serde = { version = "1.0", features = ["derive"] }
-serde_json = "1"
-toml = "0.5"
-lazy_static = "1.4"
+postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+tokio-postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+
+serde = ""
+serde_derive = ""
+toml = ""
+lazy_static = ""
 regex = "1"
 anyhow = "1.0"
-thiserror = "1"
+hex = "0.4.3"
 bytes = "1.0.1"
-nix = "0.23"
-url = "2.2.2"
-hex = { version = "0.4.3", features = ["serde"] }
-reqwest = { version = "0.11", features = ["blocking", "json"] }
+fs_extra = "1.2.0"
 
 pageserver = { path = "../pageserver" }
 walkeeper = { path = "../walkeeper" }
 postgres_ffi = { path = "../postgres_ffi" }
-zenith_utils = { path = "../zenith_utils" }
-workspace_hack = { path = "../workspace_hack" }

control_plane/safekeepers.conf

@@ -1,20 +0,0 @@
-# Page server and three safekeepers.
-[pageserver]
-pg_port = 64000
-http_port = 9898
-auth_type = 'Trust'
-
-[[safekeepers]]
-name = 'sk1'
-pg_port = 5454
-http_port = 7676
-
-[[safekeepers]]
-name = 'sk2'
-pg_port = 5455
-http_port = 7677
-
-[[safekeepers]]
-name = 'sk3'
-pg_port = 5456
-http_port = 7678

control_plane/simple.conf

@@ -1,11 +0,0 @@
-# Minimal zenith environment with one safekeeper. This is equivalent to the built-in
-# defaults that you get with no --config
-[pageserver]
-pg_port = 64000
-http_port = 9898
-auth_type = 'Trust'
-
-[[safekeepers]]
-name = 'single'
-pg_port = 5454
-http_port = 7676

control_plane/src/compute.rs

@@ -1,25 +1,23 @@
-use std::collections::BTreeMap;
-use std::fs::{self, File};
-use std::io::Write;
+use std::fs::{self, File, OpenOptions};
+use std::io::{Read, Write};
 use std::net::SocketAddr;
 use std::net::TcpStream;
 use std::os::unix::fs::PermissionsExt;
-use std::path::PathBuf;
-use std::process::{Command, Stdio};
-use std::str::FromStr;
+use std::path::Path;
+use std::process::{Command, ExitStatus};
 use std::sync::Arc;
 use std::time::Duration;
+use std::{collections::BTreeMap, path::PathBuf};
 
 use anyhow::{Context, Result};
-use zenith_utils::connstring::connection_host_port;
-use zenith_utils::lsn::Lsn;
-use zenith_utils::postgres_backend::AuthType;
-use zenith_utils::zid::ZTenantId;
-use zenith_utils::zid::ZTimelineId;
+use lazy_static::lazy_static;
+use regex::Regex;
+
+use postgres::{Client, NoTls};
 
 use crate::local_env::LocalEnv;
-use crate::postgresql_conf::PostgresConf;
-use crate::storage::PageServerNode;
+use crate::storage::{PageServerNode, WalProposerNode};
+use pageserver::{zenith_repo_dir, ZTimelineId};
 
 //
 // ComputeControlPlane
@@ -27,34 +25,27 @@ use crate::storage::PageServerNode;
 pub struct ComputeControlPlane {
     base_port: u16,
     pageserver: Arc<PageServerNode>,
-    pub nodes: BTreeMap<(ZTenantId, String), Arc<PostgresNode>>,
+    pub nodes: BTreeMap<String, Arc<PostgresNode>>,
     env: LocalEnv,
 }
 
 impl ComputeControlPlane {
     // Load current nodes with ports from data directories on disk
-    // Directory structure has the following layout:
-    // pgdatadirs
-    // |- tenants
-    // |  |- <tenant_id>
-    // |  |   |- <branch name>
     pub fn load(env: LocalEnv) -> Result<ComputeControlPlane> {
+        // TODO: since pageserver do not have config file yet we believe here that
+        // it is running on default port. Change that when pageserver will have config.
         let pageserver = Arc::new(PageServerNode::from_env(&env));
 
-        let mut nodes = BTreeMap::default();
-        let pgdatadirspath = &env.pg_data_dirs_path();
-
-        for tenant_dir in fs::read_dir(&pgdatadirspath)
+        let pgdatadirspath = env.repo_path.join("pgdatadirs");
+        let nodes: Result<BTreeMap<_, _>> = fs::read_dir(&pgdatadirspath)
             .with_context(|| format!("failed to list {}", pgdatadirspath.display()))?
-        {
-            let tenant_dir = tenant_dir?;
-            for timeline_dir in fs::read_dir(tenant_dir.path())
-                .with_context(|| format!("failed to list {}", tenant_dir.path().display()))?
-            {
-                let node = PostgresNode::from_dir_entry(timeline_dir?, &env, &pageserver)?;
-                nodes.insert((node.tenantid, node.name.clone()), Arc::new(node));
-            }
-        }
+            .into_iter()
+            .map(|f| {
+                PostgresNode::from_dir_entry(f?, &env, &pageserver)
+                    .map(|node| (node.name.clone(), Arc::new(node)))
+            })
+            .collect();
+        let nodes = nodes?;
 
         Ok(ComputeControlPlane {
             base_port: 55431,
@@ -73,62 +64,80 @@ impl ComputeControlPlane {
             .unwrap_or(self.base_port)
     }
 
-    // FIXME: see also parse_point_in_time in branches.rs.
-    fn parse_point_in_time(
-        &self,
-        tenantid: ZTenantId,
-        s: &str,
-    ) -> Result<(ZTimelineId, Option<Lsn>)> {
-        let mut strings = s.split('@');
-        let name = strings.next().unwrap();
-
-        let lsn: Option<Lsn>;
-        if let Some(lsnstr) = strings.next() {
-            lsn = Some(
-                Lsn::from_str(lsnstr)
-                    .with_context(|| "invalid LSN in point-in-time specification")?,
-            );
-        } else {
-            lsn = None
+    pub fn local(local_env: &LocalEnv, pageserver: &Arc<PageServerNode>) -> ComputeControlPlane {
+        ComputeControlPlane {
+            base_port: 65431,
+            pageserver: Arc::clone(pageserver),
+            nodes: BTreeMap::new(),
+            env: local_env.clone(),
         }
-
-        // Resolve the timeline ID, given the human-readable branch name
-        let timeline_id = self
-            .pageserver
-            .branch_get_by_name(&tenantid, name)?
-            .timeline_id;
-
-        Ok((timeline_id, lsn))
     }
 
-    pub fn new_node(
+    /// Connect to a page server, get base backup, and untar it to initialize a
+    /// new data directory
+    pub fn new_from_page_server(
         &mut self,
-        tenantid: ZTenantId,
-        name: &str,
-        timeline_spec: &str,
-        port: Option<u16>,
+        is_test: bool,
+        timelineid: ZTimelineId,
     ) -> Result<Arc<PostgresNode>> {
-        // Resolve the human-readable timeline spec into timeline ID and LSN
-        let (timelineid, lsn) = self.parse_point_in_time(tenantid, timeline_spec)?;
+        let node_id = self.nodes.len() as u32 + 1;
 
-        let port = port.unwrap_or_else(|| self.get_port());
         let node = Arc::new(PostgresNode {
-            name: name.to_owned(),
-            address: SocketAddr::new("127.0.0.1".parse().unwrap(), port),
+            name: format!("pg{}", node_id),
+            address: SocketAddr::new("127.0.0.1".parse().unwrap(), self.get_port()),
             env: self.env.clone(),
             pageserver: Arc::clone(&self.pageserver),
-            is_test: false,
+            is_test,
             timelineid,
-            lsn,
-            tenantid,
-            uses_wal_proposer: false,
         });
 
-        node.create_pgdata()?;
-        node.setup_pg_conf(self.env.pageserver.auth_type)?;
+        node.init_from_page_server()?;
+        self.nodes.insert(node.name.clone(), Arc::clone(&node));
 
-        self.nodes
-            .insert((tenantid, node.name.clone()), Arc::clone(&node));
+        Ok(node)
+    }
+
+    pub fn new_test_node(&mut self, timelineid: ZTimelineId) -> Arc<PostgresNode> {
+        let node = self.new_from_page_server(true, timelineid);
+        assert!(node.is_ok());
+        let node = node.unwrap();
+
+        // Configure the node to stream WAL directly to the pageserver
+        node.append_conf(
+            "postgresql.conf",
+            format!(
+                "callmemaybe_connstring = '{}'\n", // FIXME escaping
+                node.connstr()
+            )
+            .as_str(),
+        );
+
+        node
+    }
+
+    pub fn new_test_master_node(&mut self, timelineid: ZTimelineId) -> Arc<PostgresNode> {
+        let node = self.new_from_page_server(true, timelineid).unwrap();
+
+        node.append_conf(
+            "postgresql.conf",
+            "synchronous_standby_names = 'safekeeper_proxy'\n",
+        );
+
+        node
+    }
+
+    pub fn new_node(&mut self, timelineid: ZTimelineId) -> Result<Arc<PostgresNode>> {
+        let node = self.new_from_page_server(false, timelineid).unwrap();
+
+        // Configure the node to stream WAL directly to the pageserver
+        node.append_conf(
+            "postgresql.conf",
+            format!(
+                "callmemaybe_connstring = '{}'\n", // FIXME escaping
+                node.connstr()
+            )
+            .as_str(),
+        );
 
         Ok(node)
     }
@@ -136,17 +145,13 @@ impl ComputeControlPlane {
 
 ///////////////////////////////////////////////////////////////////////////////
 
-#[derive(Debug)]
 pub struct PostgresNode {
     pub address: SocketAddr,
     name: String,
     pub env: LocalEnv,
     pageserver: Arc<PageServerNode>,
     is_test: bool,
-    pub timelineid: ZTimelineId,
-    pub lsn: Option<Lsn>, // if it's a read-only node. None for primary
-    pub tenantid: ZTenantId,
-    uses_wal_proposer: bool,
+    timelineid: ZTimelineId,
 }
 
 impl PostgresNode {
@@ -162,28 +167,43 @@ impl PostgresNode {
             );
         }
 
+        lazy_static! {
+            static ref CONF_PORT_RE: Regex = Regex::new(r"(?m)^\s*port\s*=\s*(\d+)\s*$").unwrap();
+        }
+
         // parse data directory name
         let fname = entry.file_name();
         let name = fname.to_str().unwrap().to_string();
 
-        // Read config file into memory
+        // find out tcp port in config file
         let cfg_path = entry.path().join("postgresql.conf");
-        let cfg_path_str = cfg_path.to_string_lossy();
-        let mut conf_file = File::open(&cfg_path)
-            .with_context(|| format!("failed to open config file in {}", cfg_path_str))?;
-        let conf = PostgresConf::read(&mut conf_file)
-            .with_context(|| format!("failed to read config file in {}", cfg_path_str))?;
+        let config = fs::read_to_string(cfg_path.clone()).with_context(|| {
+            format!(
+                "failed to read config file in {}",
+                cfg_path.to_str().unwrap()
+            )
+        })?;
 
-        // Read a few options from the config file
-        let context = format!("in config file {}", cfg_path_str);
-        let port: u16 = conf.parse_field("port", &context)?;
-        let timelineid: ZTimelineId = conf.parse_field("zenith.zenith_timeline", &context)?;
-        let tenantid: ZTenantId = conf.parse_field("zenith.zenith_tenant", &context)?;
-        let uses_wal_proposer = conf.get("wal_acceptors").is_some();
+        let err_msg = format!(
+            "failed to find port definition in config file {}",
+            cfg_path.to_str().unwrap()
+        );
+        let port: u16 = CONF_PORT_RE
+            .captures(config.as_str())
+            .ok_or_else(|| anyhow::Error::msg(err_msg.clone() + " 1"))?
+            .iter()
+            .last()
+            .ok_or_else(|| anyhow::Error::msg(err_msg.clone() + " 2"))?
+            .ok_or_else(|| anyhow::Error::msg(err_msg.clone() + " 3"))?
+            .as_str()
+            .parse()
+            .with_context(|| err_msg)?;
 
-        // parse recovery_target_lsn, if any
-        let recovery_target_lsn: Option<Lsn> =
-            conf.parse_field_optional("recovery_target_lsn", &context)?;
+        // FIXME: What timeline is this server on? Would have to parse the postgresql.conf
+        // file for that, too. It's currently not needed for anything, but it would be
+        // nice to list the timeline in "zenith pg list"
+        let timelineid_buf = [0u8; 16];
+        let timelineid = ZTimelineId::from(timelineid_buf);
 
         // ok now
         Ok(PostgresNode {
@@ -193,197 +213,106 @@ impl PostgresNode {
             pageserver: Arc::clone(pageserver),
             is_test: false,
             timelineid,
-            lsn: recovery_target_lsn,
-            tenantid,
-            uses_wal_proposer,
         })
     }
 
-    fn sync_safekeepers(&self) -> Result<Lsn> {
-        let pg_path = self.env.pg_bin_dir().join("postgres");
-        let sync_handle = Command::new(pg_path)
-            .arg("--sync-safekeepers")
-            .env_clear()
-            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
-            .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
-            .env("PGDATA", self.pgdata().to_str().unwrap())
-            .stdout(Stdio::piped())
-            // Comment this to avoid capturing stderr (useful if command hangs)
-            .stderr(Stdio::piped())
-            .spawn()
-            .expect("postgres --sync-safekeepers failed to start");
+    // Connect to a page server, get base backup, and untar it to initialize a
+    // new data directory
+    pub fn init_from_page_server(&self) -> Result<()> {
+        let pgdata = self.pgdata();
 
-        let sync_output = sync_handle
-            .wait_with_output()
-            .expect("postgres --sync-safekeepers failed");
-        if !sync_output.status.success() {
-            anyhow::bail!(
-                "sync-safekeepers failed: '{}'",
-                String::from_utf8_lossy(&sync_output.stderr)
-            );
-        }
-
-        let lsn = Lsn::from_str(std::str::from_utf8(&sync_output.stdout)?.trim())?;
-        println!("Safekeepers synced on {}", lsn);
-        Ok(lsn)
-    }
-
-    /// Get basebackup from the pageserver as a tar archive and extract it
-    /// to the `self.pgdata()` directory.
-    fn do_basebackup(&self, lsn: Option<Lsn>) -> Result<()> {
         println!(
             "Extracting base backup to create postgres instance: path={} port={}",
-            self.pgdata().display(),
+            pgdata.display(),
             self.address.port()
         );
 
-        let sql = if let Some(lsn) = lsn {
-            format!("basebackup {} {} {}", self.tenantid, self.timelineid, lsn)
-        } else {
-            format!("basebackup {} {}", self.tenantid, self.timelineid)
-        };
+        // initialize data directory
+        if self.is_test {
+            fs::remove_dir_all(&pgdata).ok();
+        }
 
+        let sql = format!("basebackup {}", self.timelineid);
         let mut client = self
             .pageserver
             .page_server_psql_client()
             .with_context(|| "connecting to page server failed")?;
 
-        let copyreader = client
+        fs::create_dir_all(&pgdata)
+            .with_context(|| format!("could not create data directory {}", pgdata.display()))?;
+        fs::set_permissions(pgdata.as_path(), fs::Permissions::from_mode(0o700)).with_context(
+            || {
+                format!(
+                    "could not set permissions in data directory {}",
+                    pgdata.display()
+                )
+            },
+        )?;
+
+        // FIXME: The compute node should be able to stream the WAL it needs from the WAL safekeepers or archive.
+        // But that's not implemented yet. For now, 'pg_wal' is included in the base backup tarball that
+        // we receive from the Page Server, so we don't need to create the empty 'pg_wal' directory here.
+        //fs::create_dir_all(pgdata.join("pg_wal"))?;
+
+        let mut copyreader = client
             .copy_out(sql.as_str())
             .with_context(|| "page server 'basebackup' command failed")?;
 
-        // Read the archive directly from the `CopyOutReader`
-        tar::Archive::new(copyreader)
-            .unpack(&self.pgdata())
-            .with_context(|| "extracting base backup failed")?;
+        // FIXME: Currently, we slurp the whole tarball into memory, and then extract it,
+        // but we really should do this:
+        //let mut ar = tar::Archive::new(copyreader);
+        let mut buf = vec![];
+        copyreader
+            .read_to_end(&mut buf)
+            .with_context(|| "reading base backup from page server failed")?;
+        let mut ar = tar::Archive::new(buf.as_slice());
+        ar.unpack(&pgdata)
+            .with_context(|| "extracting page backup failed")?;
 
-        Ok(())
-    }
-
-    fn create_pgdata(&self) -> Result<()> {
-        fs::create_dir_all(&self.pgdata()).with_context(|| {
-            format!(
-                "could not create data directory {}",
-                self.pgdata().display()
-            )
-        })?;
-        fs::set_permissions(self.pgdata().as_path(), fs::Permissions::from_mode(0o700))
-            .with_context(|| {
-                format!(
-                    "could not set permissions in data directory {}",
-                    self.pgdata().display()
-                )
-            })
-    }
-
-    // Connect to a page server, get base backup, and untar it to initialize a
-    // new data directory
-    fn setup_pg_conf(&self, auth_type: AuthType) -> Result<()> {
-        let mut conf = PostgresConf::new();
-        conf.append("max_wal_senders", "10");
-        // wal_log_hints is mandatory when running against pageserver (see gh issue#192)
-        // TODO: is it possible to check wal_log_hints at pageserver side via XLOG_PARAMETER_CHANGE?
-        conf.append("wal_log_hints", "on");
-        conf.append("max_replication_slots", "10");
-        conf.append("hot_standby", "on");
-        conf.append("shared_buffers", "1MB");
-        conf.append("max_wal_size", "100GB");
-        conf.append("fsync", "off");
-        conf.append("max_connections", "100");
-        conf.append("wal_level", "replica");
-        // wal_sender_timeout is the maximum time to wait for WAL replication.
-        // It also defines how often the walreciever will send a feedback message to the wal sender.
-        //conf.append("wal_sender_timeout", "5s");
-        //conf.append("max_replication_flush_lag", "160MB");
-        //conf.append("max_replication_apply_lag", "1500MB");
-        conf.append("listen_addresses", &self.address.ip().to_string());
-        conf.append("port", &self.address.port().to_string());
+        // listen for selected port
+        self.append_conf(
+            "postgresql.conf",
+            &format!(
+                "max_wal_senders = 10\n\
+                 max_replication_slots = 10\n\
+                 hot_standby = on\n\
+                 shared_buffers = 1MB\n\
+				 fsync = off\n\
+                 max_connections = 100\n\
+				 wal_sender_timeout = 0\n\
+                 wal_level = replica\n\
+                 listen_addresses = '{address}'\n\
+                 port = {port}\n",
+                address = self.address.ip(),
+                port = self.address.port()
+            ),
+        );
 
         // Never clean up old WAL. TODO: We should use a replication
         // slot or something proper, to prevent the compute node
-        // from removing WAL that hasn't been streamed to the safekeeper or
-        // page server yet. (gh issue #349)
-        conf.append("wal_keep_size", "10TB");
+        // from removing WAL that hasn't been streamed to the safekeepr or
+        // page server yet. But this will do for now.
+        self.append_conf("postgresql.conf", "wal_keep_size='10TB'\n");
 
-        // Configure the node to fetch pages from pageserver
-        let pageserver_connstr = {
-            let (host, port) = connection_host_port(&self.pageserver.pg_connection_config);
+        // Connect it to the page server.
 
-            // Set up authentication
-            //
-            // $ZENITH_AUTH_TOKEN will be replaced with value from environment
-            // variable during compute pg startup. It is done this way because
-            // otherwise user will be able to retrieve the value using SHOW
-            // command or pg_settings
-            let password = if let AuthType::ZenithJWT = auth_type {
-                "$ZENITH_AUTH_TOKEN"
-            } else {
-                ""
-            };
-
-            format!("host={} port={} password={}", host, port, password)
-        };
-        conf.append("shared_preload_libraries", "zenith");
-        conf.append_line("");
-        conf.append("zenith.page_server_connstring", &pageserver_connstr);
-        conf.append("zenith.zenith_tenant", &self.tenantid.to_string());
-        conf.append("zenith.zenith_timeline", &self.timelineid.to_string());
-        if let Some(lsn) = self.lsn {
-            conf.append("recovery_target_lsn", &lsn.to_string());
-        }
-        conf.append_line("");
-
-        if !self.env.safekeepers.is_empty() {
-            // Configure the node to connect to the safekeepers
-            conf.append("synchronous_standby_names", "walproposer");
-
-            let wal_acceptors = self
-                .env
-                .safekeepers
-                .iter()
-                .map(|sk| format!("localhost:{}", sk.pg_port))
-                .collect::<Vec<String>>()
-                .join(",");
-            conf.append("wal_acceptors", &wal_acceptors);
-        } else {
-            // Configure the node to stream WAL directly to the pageserver
-            // This isn't really a supported configuration, but can be useful for
-            // testing.
-            conf.append("synchronous_standby_names", "pageserver");
-            conf.append("zenith.callmemaybe_connstring", &self.connstr());
-        }
-
-        let mut file = File::create(self.pgdata().join("postgresql.conf"))?;
-        file.write_all(conf.to_string().as_bytes())?;
+        // Configure that node to take pages from pageserver
+        self.append_conf(
+            "postgresql.conf",
+            &format!(
+                "page_server_connstring = 'host={} port={}'\n\
+                      zenith_timeline='{}'\n",
+                self.pageserver.address().ip(),
+                self.pageserver.address().port(),
+                self.timelineid
+            ),
+        );
 
         Ok(())
     }
 
-    fn load_basebackup(&self) -> Result<()> {
-        let backup_lsn = if let Some(lsn) = self.lsn {
-            Some(lsn)
-        } else if self.uses_wal_proposer {
-            // LSN 0 means that it is bootstrap and we need to download just
-            // latest data from the pageserver. That is a bit clumsy but whole bootstrap
-            // procedure evolves quite actively right now, so let's think about it again
-            // when things would be more stable (TODO).
-            let lsn = self.sync_safekeepers()?;
-            if lsn == Lsn(0) {
-                None
-            } else {
-                Some(lsn)
-            }
-        } else {
-            None
-        };
-
-        self.do_basebackup(backup_lsn)?;
-
-        Ok(())
-    }
-
-    pub fn pgdata(&self) -> PathBuf {
-        self.env.pg_data_dir(&self.tenantid, &self.name)
+    fn pgdata(&self) -> PathBuf {
+        self.env.repo_path.join("pgdatadirs").join(&self.name)
     }
 
     pub fn status(&self) -> &str {
@@ -399,102 +328,61 @@ impl PostgresNode {
         }
     }
 
-    fn pg_ctl(&self, args: &[&str], auth_token: &Option<String>) -> Result<()> {
+    pub fn append_conf(&self, config: &str, opts: &str) {
+        OpenOptions::new()
+            .append(true)
+            .open(self.pgdata().join(config).to_str().unwrap())
+            .unwrap()
+            .write_all(opts.as_bytes())
+            .unwrap();
+    }
+
+    fn pg_ctl(&self, args: &[&str]) -> Result<()> {
         let pg_ctl_path = self.env.pg_bin_dir().join("pg_ctl");
-        let mut cmd = Command::new(pg_ctl_path);
-        cmd.args(
-            [
-                &[
-                    "-D",
-                    self.pgdata().to_str().unwrap(),
-                    "-l",
-                    self.pgdata().join("pg.log").to_str().unwrap(),
-                    "-w", //wait till pg_ctl actually does what was asked
-                ],
-                args,
-            ]
-            .concat(),
-        )
-        .env_clear()
-        .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
-        .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap());
-
-        if let Some(token) = auth_token {
-            cmd.env("ZENITH_AUTH_TOKEN", token);
-        }
-        let pg_ctl = cmd.status().with_context(|| "pg_ctl failed")?;
 
+        let pg_ctl = Command::new(pg_ctl_path)
+            .args(
+                [
+                    &[
+                        "-D",
+                        self.pgdata().to_str().unwrap(),
+                        "-l",
+                        self.pgdata().join("log").to_str().unwrap(),
+                    ],
+                    args,
+                ]
+                .concat(),
+            )
+            .env_clear()
+            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .status()
+            .with_context(|| "pg_ctl failed")?;
         if !pg_ctl.success() {
             anyhow::bail!("pg_ctl failed");
         }
         Ok(())
     }
 
-    pub fn start(&self, auth_token: &Option<String>) -> Result<()> {
-        // Bail if the node already running.
-        if self.status() == "running" {
-            anyhow::bail!("The node is already running");
-        }
-
-        // 1. We always start compute node from scratch, so
-        // if old dir exists, preserve 'postgresql.conf' and drop the directory
-        let postgresql_conf_path = self.pgdata().join("postgresql.conf");
-        let postgresql_conf = fs::read(&postgresql_conf_path).with_context(|| {
-            format!(
-                "failed to read config file in {}",
-                postgresql_conf_path.to_str().unwrap()
-            )
-        })?;
-        fs::remove_dir_all(&self.pgdata())?;
-        self.create_pgdata()?;
-
-        // 2. Bring back config files
-        fs::write(&postgresql_conf_path, postgresql_conf)?;
-
-        // 3. Load basebackup
-        self.load_basebackup()?;
-
-        if self.lsn.is_some() {
-            File::create(self.pgdata().join("standby.signal"))?;
-        }
-
-        // 4. Finally start the compute node postgres
+    pub fn start(&self) -> Result<()> {
         println!("Starting postgres node at '{}'", self.connstr());
-        self.pg_ctl(&["start"], auth_token)
+        self.pg_ctl(&["start"])
     }
 
-    pub fn restart(&self, auth_token: &Option<String>) -> Result<()> {
-        self.pg_ctl(&["restart"], auth_token)
+    pub fn restart(&self) -> Result<()> {
+        self.pg_ctl(&["restart"])
     }
 
-    pub fn stop(&self, destroy: bool) -> Result<()> {
-        // If we are going to destroy data directory,
-        // use immediate shutdown mode, otherwise,
-        // shutdown gracefully to leave the data directory sane.
-        //
-        // Compute node always starts from scratch, so stop
-        // without destroy only used for testing and debugging.
-        //
-        if destroy {
-            self.pg_ctl(&["-m", "immediate", "stop"], &None)?;
-            println!(
-                "Destroying postgres data directory '{}'",
-                self.pgdata().to_str().unwrap()
-            );
-            fs::remove_dir_all(&self.pgdata())?;
-        } else {
-            self.pg_ctl(&["stop"], &None)?;
-        }
-        Ok(())
+    pub fn stop(&self) -> Result<()> {
+        self.pg_ctl(&["-m", "immediate", "stop"])
     }
 
     pub fn connstr(&self) -> String {
         format!(
-            "host={} port={} user={} dbname={}",
+            "host={} port={} user={}",
             self.address.ip(),
             self.address.port(),
-            "zenith_admin",
-            "postgres"
+            self.whoami()
         )
     }
 
@@ -504,10 +392,158 @@ impl PostgresNode {
             .output()
             .expect("failed to execute whoami");
 
-        assert!(output.status.success(), "whoami failed");
+        if !output.status.success() {
+            panic!("whoami failed");
+        }
 
         String::from_utf8(output.stdout).unwrap().trim().to_string()
     }
+
+    fn dump_log_file(&self) {
+        if let Ok(mut file) = File::open(self.env.repo_path.join("pageserver.log")) {
+            let mut buffer = String::new();
+            file.read_to_string(&mut buffer).unwrap();
+            println!("--------------- pageserver.log:\n{}", buffer);
+        }
+    }
+
+    pub fn safe_psql(&self, db: &str, sql: &str) -> Vec<tokio_postgres::Row> {
+        let connstring = format!(
+            "host={} port={} dbname={} user={}",
+            self.address.ip(),
+            self.address.port(),
+            db,
+            self.whoami()
+        );
+        let mut client = Client::connect(connstring.as_str(), NoTls).unwrap();
+
+        println!("Running {}", sql);
+        let result = client.query(sql, &[]);
+        if result.is_err() {
+            self.dump_log_file();
+        }
+        result.unwrap()
+    }
+
+    pub fn open_psql(&self, db: &str) -> Client {
+        let connstring = format!(
+            "host={} port={} dbname={} user={}",
+            self.address.ip(),
+            self.address.port(),
+            db,
+            self.whoami()
+        );
+        Client::connect(connstring.as_str(), NoTls).unwrap()
+    }
+
+    pub fn start_proxy(&self, wal_acceptors: &str) -> WalProposerNode {
+        let proxy_path = self.env.pg_bin_dir().join("safekeeper_proxy");
+        match Command::new(proxy_path.as_path())
+            .args(&["--ztimelineid", &self.timelineid.to_string()])
+            .args(&["-s", wal_acceptors])
+            .args(&["-h", &self.address.ip().to_string()])
+            .args(&["-p", &self.address.port().to_string()])
+            .arg("-v")
+            .stderr(
+                OpenOptions::new()
+                    .create(true)
+                    .append(true)
+                    .open(self.pgdata().join("safekeeper_proxy.log"))
+                    .unwrap(),
+            )
+            .spawn()
+        {
+            Ok(child) => WalProposerNode { pid: child.id() },
+            Err(e) => panic!("Failed to launch {:?}: {}", proxy_path, e),
+        }
+    }
+
+    pub fn pg_regress(&self) -> ExitStatus {
+        self.safe_psql("postgres", "CREATE DATABASE regression");
+        let data_dir = zenith_repo_dir();
+        let regress_run_path = data_dir.join("regress");
+        fs::create_dir_all(&regress_run_path).unwrap();
+        fs::create_dir_all(regress_run_path.join("testtablespace")).unwrap();
+        std::env::set_current_dir(regress_run_path).unwrap();
+
+        let regress_build_path =
+            Path::new(env!("CARGO_MANIFEST_DIR")).join("../tmp_install/build/src/test/regress");
+        let regress_src_path =
+            Path::new(env!("CARGO_MANIFEST_DIR")).join("../vendor/postgres/src/test/regress");
+
+        let regress_check = Command::new(regress_build_path.join("pg_regress"))
+            .args(&[
+                "--bindir=''",
+                "--use-existing",
+                format!("--bindir={}", self.env.pg_bin_dir().to_str().unwrap()).as_str(),
+                format!("--dlpath={}", regress_build_path.to_str().unwrap()).as_str(),
+                format!(
+                    "--schedule={}",
+                    regress_src_path.join("parallel_schedule").to_str().unwrap()
+                )
+                .as_str(),
+                format!("--inputdir={}", regress_src_path.to_str().unwrap()).as_str(),
+            ])
+            .env_clear()
+            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .env("PGPORT", self.address.port().to_string())
+            .env("PGUSER", self.whoami())
+            .env("PGHOST", self.address.ip().to_string())
+            .status()
+            .expect("pg_regress failed");
+        if !regress_check.success() {
+            if let Ok(mut file) = File::open("regression.diffs") {
+                let mut buffer = String::new();
+                file.read_to_string(&mut buffer).unwrap();
+                println!("--------------- regression.diffs:\n{}", buffer);
+            }
+            self.dump_log_file();
+            if let Ok(mut file) = File::open(
+                self.env
+                    .repo_path
+                    .join("pgdatadirs")
+                    .join("pg1")
+                    .join("log"),
+            ) {
+                let mut buffer = String::new();
+                file.read_to_string(&mut buffer).unwrap();
+                println!("--------------- pgdatadirs/pg1/log:\n{}", buffer);
+            }
+        }
+        regress_check
+    }
+
+    pub fn pg_bench(&self, clients: u32, seconds: u32) -> ExitStatus {
+        let port = self.address.port().to_string();
+        let clients = clients.to_string();
+        let seconds = seconds.to_string();
+        let _pg_bench_init = Command::new(self.env.pg_bin_dir().join("pgbench"))
+            .args(&["-i", "-p", port.as_str(), "postgres"])
+            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .status()
+            .expect("pgbench -i");
+        let pg_bench_run = Command::new(self.env.pg_bin_dir().join("pgbench"))
+            .args(&[
+                "-p",
+                port.as_str(),
+                "-T",
+                seconds.as_str(),
+                "-P",
+                "1",
+                "-c",
+                clients.as_str(),
+                "-M",
+                "prepared",
+                "postgres",
+            ])
+            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .status()
+            .expect("pgbench run");
+        pg_bench_run
+    }
 }
 
 impl Drop for PostgresNode {
@@ -516,7 +552,7 @@ impl Drop for PostgresNode {
     // and checking it here. But let just clean datadirs on start.
     fn drop(&mut self) {
         if self.is_test {
-            let _ = self.stop(true);
+            let _ = self.stop();
         }
     }
 }

control_plane/src/lib.rs

@@ -1,33 +1,12 @@
 //
 // Local control plane.
 //
-// Can start, configure and stop postgres instances running as a local processes.
+// Can start, cofigure and stop postgres instances running as a local processes.
 //
 // Intended to be used in integration tests and in CLI tools for
 // local installations.
 //
-use anyhow::{anyhow, bail, Context, Result};
-use std::fs;
-use std::path::Path;
 
 pub mod compute;
 pub mod local_env;
-pub mod postgresql_conf;
-pub mod safekeeper;
 pub mod storage;
-
-/// Read a PID file
-///
-/// We expect a file that contains a single integer.
-/// We return an i32 for compatibility with libc and nix.
-pub fn read_pidfile(pidfile: &Path) -> Result<i32> {
-    let pid_str = fs::read_to_string(pidfile)
-        .with_context(|| format!("failed to read pidfile {:?}", pidfile))?;
-    let pid: i32 = pid_str
-        .parse()
-        .map_err(|_| anyhow!("failed to parse pidfile {:?}", pidfile))?;
-    if pid < 1 {
-        bail!("pidfile {:?} contained bad value '{}'", pidfile, pid);
-    }
-    Ok(pid)
-}

control_plane/src/local_env.rs

@@ -4,351 +4,386 @@
 // Now it also provides init method which acts like a stub for proper installation
 // script which will use local paths.
 //
-use anyhow::{Context, Result};
-use serde::{Deserialize, Serialize};
+use anyhow::Context;
+use bytes::Bytes;
+use rand::Rng;
 use std::env;
-use std::fmt::Write;
 use std::fs;
 use std::path::{Path, PathBuf};
 use std::process::{Command, Stdio};
-use zenith_utils::auth::{encode_from_key_file, Claims, Scope};
-use zenith_utils::postgres_backend::AuthType;
-use zenith_utils::zid::ZTenantId;
+
+use anyhow::Result;
+use serde_derive::{Deserialize, Serialize};
+
+use pageserver::zenith_repo_dir;
+use pageserver::ZTimelineId;
+use postgres_ffi::xlog_utils;
 
 //
-// This data structures represents zenith CLI config
+// This data structure represents deserialized zenith config, which should be
+// located in ~/.zenith
 //
-// It is deserialized from the .zenith/config file, or the config file passed
-// to 'zenith init --config=<path>' option. See control_plane/simple.conf for
-// an example.
+// TODO: should we also support ZENITH_CONF env var?
 //
-#[derive(Serialize, Deserialize, Clone, Debug)]
+#[derive(Serialize, Deserialize, Clone)]
 pub struct LocalEnv {
-    // Base directory for all the nodes (the pageserver, safekeepers and
-    // compute nodes).
-    //
-    // This is not stored in the config file. Rather, this is the path where the
-    // config file itself is. It is read from the ZENITH_REPO_DIR env variable or
-    // '.zenith' if not given.
-    #[serde(skip)]
-    pub base_data_dir: PathBuf,
+    // Path to the Repository. Here page server and compute nodes will create and store their data.
+    pub repo_path: PathBuf,
+
+    // System identifier, from the PostgreSQL control file
+    pub systemid: u64,
 
     // Path to postgres distribution. It's expected that "bin", "include",
     // "lib", "share" from postgres distribution are there. If at some point
     // in time we will be able to run against vanilla postgres we may split that
     // to four separate paths and match OS-specific installation layout.
-    #[serde(default)]
     pub pg_distrib_dir: PathBuf,
 
     // Path to pageserver binary.
-    #[serde(default)]
     pub zenith_distrib_dir: PathBuf,
-
-    // Default tenant ID to use with the 'zenith' command line utility, when
-    // --tenantid is not explicitly specified.
-    #[serde(with = "opt_tenantid_serde")]
-    #[serde(default)]
-    pub default_tenantid: Option<ZTenantId>,
-
-    // used to issue tokens during e.g pg start
-    #[serde(default)]
-    pub private_key_path: PathBuf,
-
-    pub pageserver: PageServerConf,
-
-    #[serde(default)]
-    pub safekeepers: Vec<SafekeeperConf>,
-}
-
-#[derive(Serialize, Deserialize, Clone, Debug)]
-#[serde(default)]
-pub struct PageServerConf {
-    // Pageserver connection settings
-    pub pg_port: u16,
-    pub http_port: u16,
-
-    // used to determine which auth type is used
-    pub auth_type: AuthType,
-
-    // jwt auth token used for communication with pageserver
-    pub auth_token: String,
-}
-
-impl Default for PageServerConf {
-    fn default() -> Self {
-        Self {
-            pg_port: 0,
-            http_port: 0,
-            auth_type: AuthType::Trust,
-            auth_token: "".to_string(),
-        }
-    }
-}
-
-#[derive(Serialize, Deserialize, Clone, Debug)]
-#[serde(default)]
-pub struct SafekeeperConf {
-    pub name: String,
-    pub pg_port: u16,
-    pub http_port: u16,
-    pub sync: bool,
-}
-
-impl Default for SafekeeperConf {
-    fn default() -> Self {
-        Self {
-            name: "".to_string(),
-            pg_port: 0,
-            http_port: 0,
-            sync: true,
-        }
-    }
 }
 
 impl LocalEnv {
-    // postgres installation paths
+    // postgres installation
     pub fn pg_bin_dir(&self) -> PathBuf {
         self.pg_distrib_dir.join("bin")
     }
     pub fn pg_lib_dir(&self) -> PathBuf {
         self.pg_distrib_dir.join("lib")
     }
+}
 
-    pub fn pageserver_bin(&self) -> Result<PathBuf> {
-        Ok(self.zenith_distrib_dir.join("pageserver"))
+//
+// Initialize a new Zenith repository
+//
+pub fn init() -> Result<()> {
+    // check if config already exists
+    let repo_path = zenith_repo_dir();
+    if repo_path.exists() {
+        anyhow::bail!(
+            "{} already exists. Perhaps already initialized?",
+            repo_path.to_str().unwrap()
+        );
     }
 
-    pub fn safekeeper_bin(&self) -> Result<PathBuf> {
-        Ok(self.zenith_distrib_dir.join("safekeeper"))
+    // Now we can run init only from crate directory, so check that current dir is our crate.
+    // Use 'pageserver/Cargo.toml' existence as evidendce.
+    let cargo_path = env::current_dir()?;
+    if !cargo_path.join("pageserver/Cargo.toml").exists() {
+        anyhow::bail!(
+            "Current directory does not look like a zenith repo. \
+            Please, run 'init' from zenith repo root."
+        );
     }
 
-    pub fn pg_data_dirs_path(&self) -> PathBuf {
-        self.base_data_dir.join("pgdatadirs").join("tenants")
+    // ok, now check that expected binaries are present
+
+    // check postgres
+    let pg_distrib_dir = cargo_path.join("tmp_install");
+    let pg_path = pg_distrib_dir.join("bin/postgres");
+    if !pg_path.exists() {
+        anyhow::bail!(
+            "Can't find postres binary at {}. \
+                       Perhaps 'make postgres' is needed to build it first.",
+            pg_path.to_str().unwrap()
+        );
     }
 
-    pub fn pg_data_dir(&self, tenantid: &ZTenantId, branch_name: &str) -> PathBuf {
-        self.pg_data_dirs_path()
-            .join(tenantid.to_string())
-            .join(branch_name)
+    // check pageserver
+    let zenith_distrib_dir = cargo_path.join("target/debug/");
+    let pageserver_path = zenith_distrib_dir.join("pageserver");
+    if !pageserver_path.exists() {
+        anyhow::bail!(
+            "Can't find pageserver binary at {}. Please build it.",
+            pageserver_path.to_str().unwrap()
+        );
     }
 
-    // TODO: move pageserver files into ./pageserver
-    pub fn pageserver_data_dir(&self) -> PathBuf {
-        self.base_data_dir.clone()
-    }
+    // ok, we are good to go
+    let mut conf = LocalEnv {
+        repo_path,
+        pg_distrib_dir,
+        zenith_distrib_dir,
+        systemid: 0,
+    };
+    init_repo(&mut conf)?;
 
-    pub fn safekeeper_data_dir(&self, node_name: &str) -> PathBuf {
-        self.base_data_dir.join("safekeepers").join(node_name)
-    }
+    Ok(())
+}
 
-    /// Create a LocalEnv from a config file.
-    ///
-    /// Unlike 'load_config', this function fills in any defaults that are missing
-    /// from the config file.
-    pub fn create_config(toml: &str) -> Result<LocalEnv> {
-        let mut env: LocalEnv = toml::from_str(toml)?;
+pub fn init_repo(local_env: &mut LocalEnv) -> Result<()> {
+    let repopath = &local_env.repo_path;
+    fs::create_dir(&repopath)
+        .with_context(|| format!("could not create directory {}", repopath.display()))?;
+    fs::create_dir(repopath.join("pgdatadirs"))?;
+    fs::create_dir(repopath.join("timelines"))?;
+    fs::create_dir(repopath.join("refs"))?;
+    fs::create_dir(repopath.join("refs").join("branches"))?;
+    fs::create_dir(repopath.join("refs").join("tags"))?;
+    println!("created directory structure in {}", repopath.display());
 
-        // Find postgres binaries.
-        // Follow POSTGRES_DISTRIB_DIR if set, otherwise look in "tmp_install".
-        if env.pg_distrib_dir == Path::new("") {
-            if let Some(postgres_bin) = env::var_os("POSTGRES_DISTRIB_DIR") {
-                env.pg_distrib_dir = postgres_bin.into();
-            } else {
-                let cwd = env::current_dir()?;
-                env.pg_distrib_dir = cwd.join("tmp_install")
-            }
-        }
-        if !env.pg_distrib_dir.join("bin/postgres").exists() {
-            anyhow::bail!(
-                "Can't find postgres binary at {}",
-                env.pg_distrib_dir.display()
-            );
-        }
-
-        // Find zenith binaries.
-        if env.zenith_distrib_dir == Path::new("") {
-            env.zenith_distrib_dir = env::current_exe()?.parent().unwrap().to_owned();
-        }
-        if !env.zenith_distrib_dir.join("pageserver").exists() {
-            anyhow::bail!("Can't find pageserver binary.");
-        }
-        if !env.zenith_distrib_dir.join("safekeeper").exists() {
-            anyhow::bail!("Can't find safekeeper binary.");
-        }
-
-        // If no initial tenant ID was given, generate it.
-        if env.default_tenantid.is_none() {
-            env.default_tenantid = Some(ZTenantId::generate());
-        }
-
-        env.base_data_dir = base_path();
-
-        Ok(env)
-    }
-
-    /// Locate and load config
-    pub fn load_config() -> Result<LocalEnv> {
-        let repopath = base_path();
-
-        if !repopath.exists() {
-            anyhow::bail!(
-                "Zenith config is not found in {}. You need to run 'zenith init' first",
-                repopath.to_str().unwrap()
-            );
-        }
-
-        // TODO: check that it looks like a zenith repository
-
-        // load and parse file
-        let config = fs::read_to_string(repopath.join("config"))?;
-        let mut env: LocalEnv = toml::from_str(config.as_str())?;
-
-        env.base_data_dir = repopath;
-
-        Ok(env)
-    }
-
-    // this function is used only for testing purposes in CLI e g generate tokens during init
-    pub fn generate_auth_token(&self, claims: &Claims) -> Result<String> {
-        let private_key_path = if self.private_key_path.is_absolute() {
-            self.private_key_path.to_path_buf()
-        } else {
-            self.base_data_dir.join(&self.private_key_path)
-        };
-
-        let key_data = fs::read(private_key_path)?;
-        encode_from_key_file(claims, &key_data)
-    }
+    // Create initial timeline
+    let tli = create_timeline(&local_env, None)?;
+    let timelinedir = repopath.join("timelines").join(tli.to_string());
+    println!("created initial timeline {}", timelinedir.display());
 
+    // Run initdb
     //
-    // Initialize a new Zenith repository
-    //
-    pub fn init(&mut self) -> Result<()> {
-        // check if config already exists
-        let base_path = &self.base_data_dir;
-        if base_path == Path::new("") {
-            anyhow::bail!("repository base path is missing");
-        }
-        if base_path.exists() {
-            anyhow::bail!(
-                "directory '{}' already exists. Perhaps already initialized?",
-                base_path.to_str().unwrap()
-            );
-        }
+    // We create the cluster temporarily in a "tmp" directory inside the repository,
+    // and move it to the right location from there.
+    let tmppath = repopath.join("tmp");
 
-        fs::create_dir(&base_path)?;
-
-        // generate keys for jwt
-        // openssl genrsa -out private_key.pem 2048
-        let private_key_path;
-        if self.private_key_path == PathBuf::new() {
-            private_key_path = base_path.join("auth_private_key.pem");
-            let keygen_output = Command::new("openssl")
-                .arg("genrsa")
-                .args(&["-out", private_key_path.to_str().unwrap()])
-                .arg("2048")
-                .stdout(Stdio::null())
-                .output()
-                .with_context(|| "failed to generate auth private key")?;
-            if !keygen_output.status.success() {
-                anyhow::bail!(
-                    "openssl failed: '{}'",
-                    String::from_utf8_lossy(&keygen_output.stderr)
-                );
-            }
-            self.private_key_path = Path::new("auth_private_key.pem").to_path_buf();
-
-            let public_key_path = base_path.join("auth_public_key.pem");
-            // openssl rsa -in private_key.pem -pubout -outform PEM -out public_key.pem
-            let keygen_output = Command::new("openssl")
-                .arg("rsa")
-                .args(&["-in", private_key_path.to_str().unwrap()])
-                .arg("-pubout")
-                .args(&["-outform", "PEM"])
-                .args(&["-out", public_key_path.to_str().unwrap()])
-                .stdout(Stdio::null())
-                .output()
-                .with_context(|| "failed to generate auth private key")?;
-            if !keygen_output.status.success() {
-                anyhow::bail!(
-                    "openssl failed: '{}'",
-                    String::from_utf8_lossy(&keygen_output.stderr)
-                );
-            }
-        }
-
-        self.pageserver.auth_token =
-            self.generate_auth_token(&Claims::new(None, Scope::PageServerApi))?;
-
-        fs::create_dir_all(self.pg_data_dirs_path())?;
-
-        for safekeeper in self.safekeepers.iter() {
-            fs::create_dir_all(self.safekeeper_data_dir(&safekeeper.name))?;
-        }
-
-        let mut conf_content = String::new();
-
-        // Currently, the user first passes a config file with 'zenith init --config=<path>'
-        // We read that in, in `create_config`, and fill any missing defaults. Then it's saved
-        // to .zenith/config. TODO: We lose any formatting and comments along the way, which is
-        // a bit sad.
-        write!(
-            &mut conf_content,
-            r#"# This file describes a locale deployment of the page server
-# and safekeeeper node. It is read by the 'zenith' command-line
-# utility.
-"#
-        )?;
-
-        // Convert the LocalEnv to a toml file.
-        //
-        // This could be as simple as this:
-        //
-        // conf_content += &toml::to_string_pretty(env)?;
-        //
-        // But it results in a "values must be emitted before tables". I'm not sure
-        // why, AFAICS the table, i.e. 'safekeepers: Vec<SafekeeperConf>' is last.
-        // Maybe rust reorders the fields to squeeze avoid padding or something?
-        // In any case, converting to toml::Value first, and serializing that, works.
-        // See https://github.com/alexcrichton/toml-rs/issues/142
-        conf_content += &toml::to_string_pretty(&toml::Value::try_from(&self)?)?;
-
-        fs::write(base_path.join("config"), conf_content)?;
-
-        Ok(())
+    let initdb_path = local_env.pg_bin_dir().join("initdb");
+    let initdb = Command::new(initdb_path)
+        .args(&["-D", tmppath.to_str().unwrap()])
+        .arg("--no-instructions")
+        .env_clear()
+        .env("LD_LIBRARY_PATH", local_env.pg_lib_dir().to_str().unwrap())
+        .env(
+            "DYLD_LIBRARY_PATH",
+            local_env.pg_lib_dir().to_str().unwrap(),
+        )
+        .stdout(Stdio::null())
+        .status()
+        .with_context(|| "failed to execute initdb")?;
+    if !initdb.success() {
+        anyhow::bail!("initdb failed");
     }
+    println!("initdb succeeded");
+
+    // Read control file to extract the LSN and system id
+    let controlfile_path = tmppath.join("global").join("pg_control");
+    let controlfile = postgres_ffi::decode_pg_control(Bytes::from(fs::read(controlfile_path)?))?;
+    let systemid = controlfile.system_identifier;
+    let lsn = controlfile.checkPoint;
+    let lsnstr = format!("{:016X}", lsn);
+
+    // Move the initial WAL file
+    fs::rename(
+        tmppath.join("pg_wal").join("000000010000000000000001"),
+        timelinedir
+            .join("wal")
+            .join("000000010000000000000001.partial"),
+    )?;
+    println!("moved initial WAL file");
+
+    // Remove pg_wal
+    fs::remove_dir_all(tmppath.join("pg_wal"))?;
+
+    force_crash_recovery(&tmppath)?;
+    println!("updated pg_control");
+
+    let target = timelinedir.join("snapshots").join(&lsnstr);
+    fs::rename(tmppath, &target)?;
+    println!("moved 'tmp' to {}", target.display());
+
+    // Create 'main' branch to refer to the initial timeline
+    let data = tli.to_string();
+    fs::write(repopath.join("refs").join("branches").join("main"), data)?;
+    println!("created main branch");
+
+    // Also update the system id in the LocalEnv
+    local_env.systemid = systemid;
+
+    // write config
+    let toml = toml::to_string(&local_env)?;
+    fs::write(repopath.join("config"), toml)?;
+
+    println!(
+        "new zenith repository was created in {}",
+        repopath.display()
+    );
+
+    Ok(())
 }
 
-fn base_path() -> PathBuf {
-    match std::env::var_os("ZENITH_REPO_DIR") {
-        Some(val) => PathBuf::from(val.to_str().unwrap()),
-        None => ".zenith".into(),
-    }
+// If control file says the cluster was shut down cleanly, modify it, to mark
+// it as crashed. That forces crash recovery when you start the cluster.
+//
+// FIXME:
+// We currently do this to the initial snapshot in "zenith init". It would
+// be more natural to do this when the snapshot is restored instead, but we
+// currently don't have any code to create new snapshots, so it doesn't matter
+// Or better yet, use a less hacky way of putting the cluster into recovery.
+// Perhaps create a backup label file in the data directory when it's restored.
+fn force_crash_recovery(datadir: &Path) -> Result<()> {
+    // Read in the control file
+    let controlfilepath = datadir.to_path_buf().join("global").join("pg_control");
+    let mut controlfile =
+        postgres_ffi::decode_pg_control(Bytes::from(fs::read(controlfilepath.as_path())?))?;
+
+    controlfile.state = postgres_ffi::DBState_DB_IN_PRODUCTION;
+
+    fs::write(
+        controlfilepath.as_path(),
+        postgres_ffi::encode_pg_control(controlfile),
+    )?;
+
+    Ok(())
 }
 
-/// Serde routines for Option<ZTenantId>. The serialized form is a hex string.
-mod opt_tenantid_serde {
-    use serde::{Deserialize, Deserializer, Serialize, Serializer};
-    use std::str::FromStr;
-    use zenith_utils::zid::ZTenantId;
-
-    pub fn serialize<S>(tenantid: &Option<ZTenantId>, ser: S) -> Result<S::Ok, S::Error>
-    where
-        S: Serializer,
-    {
-        tenantid.map(|t| t.to_string()).serialize(ser)
+// check that config file is present
+pub fn load_config(repopath: &Path) -> Result<LocalEnv> {
+    if !repopath.exists() {
+        anyhow::bail!(
+            "Zenith config is not found in {}. You need to run 'zenith init' first",
+            repopath.to_str().unwrap()
+        );
     }
 
-    pub fn deserialize<'de, D>(des: D) -> Result<Option<ZTenantId>, D::Error>
-    where
-        D: Deserializer<'de>,
-    {
-        let s: Option<String> = Option::deserialize(des)?;
-        if let Some(s) = s {
-            return Ok(Some(
-                ZTenantId::from_str(&s).map_err(serde::de::Error::custom)?,
-            ));
+    // load and parse file
+    let config = fs::read_to_string(repopath.join("config"))?;
+    toml::from_str(config.as_str()).map_err(|e| e.into())
+}
+
+// local env for tests
+pub fn test_env(testname: &str) -> LocalEnv {
+    fs::create_dir_all("../tmp_check").expect("could not create directory ../tmp_check");
+
+    let repo_path = Path::new(env!("CARGO_MANIFEST_DIR"))
+        .join("../tmp_check/")
+        .join(testname);
+
+    // Remove remnants of old test repo
+    let _ = fs::remove_dir_all(&repo_path);
+
+    let mut local_env = LocalEnv {
+        repo_path,
+        pg_distrib_dir: Path::new(env!("CARGO_MANIFEST_DIR")).join("../tmp_install"),
+        zenith_distrib_dir: cargo_bin_dir(),
+        systemid: 0,
+    };
+    init_repo(&mut local_env).expect("could not initialize zenith repository");
+    local_env
+}
+
+// Find the directory where the binaries were put (i.e. target/debug/)
+pub fn cargo_bin_dir() -> PathBuf {
+    let mut pathbuf = std::env::current_exe().unwrap();
+
+    pathbuf.pop();
+    if pathbuf.ends_with("deps") {
+        pathbuf.pop();
+    }
+
+    pathbuf
+}
+
+#[derive(Debug, Clone, Copy)]
+pub struct PointInTime {
+    pub timelineid: ZTimelineId,
+    pub lsn: u64,
+}
+
+fn create_timeline(local_env: &LocalEnv, ancestor: Option<PointInTime>) -> Result<ZTimelineId> {
+    let repopath = &local_env.repo_path;
+
+    // Create initial timeline
+    let mut tli_buf = [0u8; 16];
+    rand::thread_rng().fill(&mut tli_buf);
+    let timelineid = ZTimelineId::from(tli_buf);
+
+    let timelinedir = repopath.join("timelines").join(timelineid.to_string());
+
+    fs::create_dir(&timelinedir)?;
+    fs::create_dir(&timelinedir.join("snapshots"))?;
+    fs::create_dir(&timelinedir.join("wal"))?;
+
+    if let Some(ancestor) = ancestor {
+        let data = format!(
+            "{}@{:X}/{:X}",
+            ancestor.timelineid,
+            ancestor.lsn >> 32,
+            ancestor.lsn & 0xffffffff
+        );
+        fs::write(timelinedir.join("ancestor"), data)?;
+    }
+
+    Ok(timelineid)
+}
+
+// Parse an LSN in the format used in filenames
+//
+// For example: 00000000015D3DD8
+//
+fn parse_lsn(s: &str) -> std::result::Result<u64, std::num::ParseIntError> {
+    u64::from_str_radix(s, 16)
+}
+
+// Create a new branch in the repository (for the "zenith branch" subcommand)
+pub fn create_branch(
+    local_env: &LocalEnv,
+    branchname: &str,
+    startpoint: PointInTime,
+) -> Result<()> {
+    let repopath = &local_env.repo_path;
+
+    // create a new timeline for it
+    let newtli = create_timeline(local_env, Some(startpoint))?;
+    let newtimelinedir = repopath.join("timelines").join(newtli.to_string());
+
+    let data = newtli.to_string();
+    fs::write(
+        repopath.join("refs").join("branches").join(branchname),
+        data,
+    )?;
+
+    // Copy the latest snapshot (TODO: before the startpoint) and all WAL
+    // TODO: be smarter and avoid the copying...
+    let (_maxsnapshot, oldsnapshotdir) = find_latest_snapshot(local_env, startpoint.timelineid)?;
+    let copy_opts = fs_extra::dir::CopyOptions::new();
+    fs_extra::dir::copy(oldsnapshotdir, newtimelinedir.join("snapshots"), &copy_opts)?;
+
+    let oldtimelinedir = repopath
+        .join("timelines")
+        .join(startpoint.timelineid.to_string());
+    let mut copy_opts = fs_extra::dir::CopyOptions::new();
+    copy_opts.content_only = true;
+    fs_extra::dir::copy(
+        oldtimelinedir.join("wal"),
+        newtimelinedir.join("wal"),
+        &copy_opts,
+    )?;
+
+    Ok(())
+}
+
+// Find the end of valid WAL in a wal directory
+pub fn find_end_of_wal(local_env: &LocalEnv, timeline: ZTimelineId) -> Result<u64> {
+    let repopath = &local_env.repo_path;
+    let waldir = repopath
+        .join("timelines")
+        .join(timeline.to_string())
+        .join("wal");
+
+    let (lsn, _tli) = xlog_utils::find_end_of_wal(&waldir, 16 * 1024 * 1024, true);
+
+    Ok(lsn)
+}
+
+// Find the latest snapshot for a timeline
+fn find_latest_snapshot(local_env: &LocalEnv, timeline: ZTimelineId) -> Result<(u64, PathBuf)> {
+    let repopath = &local_env.repo_path;
+
+    let snapshotsdir = repopath
+        .join("timelines")
+        .join(timeline.to_string())
+        .join("snapshots");
+    let paths = fs::read_dir(&snapshotsdir)?;
+    let mut maxsnapshot: u64 = 0;
+    let mut snapshotdir: Option<PathBuf> = None;
+    for path in paths {
+        let path = path?;
+        let filename = path.file_name().to_str().unwrap().to_owned();
+        if let Ok(lsn) = parse_lsn(&filename) {
+            maxsnapshot = std::cmp::max(lsn, maxsnapshot);
+            snapshotdir = Some(path.path());
         }
-        Ok(None)
     }
+    if maxsnapshot == 0 {
+        // TODO: check ancestor timeline
+        anyhow::bail!("no snapshot found in {}", snapshotsdir.display());
+    }
+
+    Ok((maxsnapshot, snapshotdir.unwrap()))
 }

control_plane/src/postgresql_conf.rs

@@ -1,228 +0,0 @@
-///
-/// Module for parsing postgresql.conf file.
-///
-/// NOTE: This doesn't implement the full, correct postgresql.conf syntax. Just
-/// enough to extract a few settings we need in Zenith, assuming you don't do
-/// funny stuff like include-directives or funny escaping.
-use anyhow::{anyhow, bail, Context, Result};
-use lazy_static::lazy_static;
-use regex::Regex;
-use std::collections::HashMap;
-use std::fmt;
-use std::io::BufRead;
-use std::str::FromStr;
-
-/// In-memory representation of a postgresql.conf file
-#[derive(Default)]
-pub struct PostgresConf {
-    lines: Vec<String>,
-    hash: HashMap<String, String>,
-}
-
-lazy_static! {
-    static ref CONF_LINE_RE: Regex = Regex::new(r"^((?:\w|\.)+)\s*=\s*(\S+)$").unwrap();
-}
-
-impl PostgresConf {
-    pub fn new() -> PostgresConf {
-        PostgresConf::default()
-    }
-
-    /// Read file into memory
-    pub fn read(read: impl std::io::Read) -> Result<PostgresConf> {
-        let mut result = Self::new();
-
-        for line in std::io::BufReader::new(read).lines() {
-            let line = line?;
-
-            // Store each line in a vector, in original format
-            result.lines.push(line.clone());
-
-            // Also parse each line and insert key=value lines into a hash map.
-            //
-            // FIXME: This doesn't match exactly the flex/bison grammar in PostgreSQL.
-            // But it's close enough for our usage.
-            let line = line.trim();
-            if line.starts_with('#') {
-                // comment, ignore
-                continue;
-            } else if let Some(caps) = CONF_LINE_RE.captures(line) {
-                let name = caps.get(1).unwrap().as_str();
-                let raw_val = caps.get(2).unwrap().as_str();
-
-                if let Ok(val) = deescape_str(raw_val) {
-                    // Note: if there's already an entry in the hash map for
-                    // this key, this will replace it. That's the behavior what
-                    // we want; when PostgreSQL reads the file, each line
-                    // overrides any previous value for the same setting.
-                    result.hash.insert(name.to_string(), val.to_string());
-                }
-            }
-        }
-        Ok(result)
-    }
-
-    /// Return the current value of 'option'
-    pub fn get(&self, option: &str) -> Option<&str> {
-        self.hash.get(option).map(|x| x.as_ref())
-    }
-
-    /// Return the current value of a field, parsed to the right datatype.
-    ///
-    /// This calls the FromStr::parse() function on the value of the field. If
-    /// the field does not exist, or parsing fails, returns an error.
-    ///
-    pub fn parse_field<T>(&self, field_name: &str, context: &str) -> Result<T>
-    where
-        T: FromStr,
-        <T as FromStr>::Err: std::error::Error + Send + Sync + 'static,
-    {
-        self.get(field_name)
-            .ok_or_else(|| anyhow!("could not find '{}' option {}", field_name, context))?
-            .parse::<T>()
-            .with_context(|| format!("could not parse '{}' option {}", field_name, context))
-    }
-
-    pub fn parse_field_optional<T>(&self, field_name: &str, context: &str) -> Result<Option<T>>
-    where
-        T: FromStr,
-        <T as FromStr>::Err: std::error::Error + Send + Sync + 'static,
-    {
-        if let Some(val) = self.get(field_name) {
-            let result = val
-                .parse::<T>()
-                .with_context(|| format!("could not parse '{}' option {}", field_name, context))?;
-
-            Ok(Some(result))
-        } else {
-            Ok(None)
-        }
-    }
-
-    ///
-    /// Note: if you call this multiple times for the same option, the config
-    /// file will a line for each call. It would be nice to have a function
-    /// to change an existing line, but that's a TODO.
-    ///
-    pub fn append(&mut self, option: &str, value: &str) {
-        self.lines
-            .push(format!("{}={}\n", option, escape_str(value)));
-        self.hash.insert(option.to_string(), value.to_string());
-    }
-
-    /// Append an arbitrary non-setting line to the config file
-    pub fn append_line(&mut self, line: &str) {
-        self.lines.push(line.to_string());
-    }
-}
-
-impl fmt::Display for PostgresConf {
-    /// Return the whole configuration file as a string
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        for line in self.lines.iter() {
-            f.write_str(line)?;
-        }
-        Ok(())
-    }
-}
-
-/// Escape a value for putting in postgresql.conf.
-fn escape_str(s: &str) -> String {
-    // If the string doesn't contain anything that needs quoting or escaping, return it
-    // as it is.
-    //
-    // The first part of the regex, before the '|', matches the INTEGER rule in the
-    // PostgreSQL flex grammar (guc-file.l). It matches plain integers like "123" and
-    // "-123", and also accepts units like "10MB". The second part of the regex matches
-    // the UNQUOTED_STRING rule, and accepts strings that contain a single word, beginning
-    // with a letter. That covers words like "off" or "posix". Everything else is quoted.
-    //
-    // This regex is a bit more conservative than the rules in guc-file.l, so we quote some
-    // strings that PostgreSQL would accept without quoting, but that's OK.
-    lazy_static! {
-        static ref UNQUOTED_RE: Regex =
-            Regex::new(r"(^[-+]?[0-9]+[a-zA-Z]*$)|(^[a-zA-Z][a-zA-Z0-9]*$)").unwrap();
-    }
-    if UNQUOTED_RE.is_match(s) {
-        s.to_string()
-    } else {
-        // Otherwise escape and quote it
-        let s = s
-            .replace('\\', "\\\\")
-            .replace('\n', "\\n")
-            .replace('\'', "''");
-
-        "\'".to_owned() + &s + "\'"
-    }
-}
-
-/// De-escape a possibly-quoted value.
-///
-/// See `DeescapeQuotedString` function in PostgreSQL sources for how PostgreSQL
-/// does this.
-fn deescape_str(s: &str) -> Result<String> {
-    // If the string has a quote at the beginning and end, strip them out.
-    if s.len() >= 2 && s.starts_with('\'') && s.ends_with('\'') {
-        let mut result = String::new();
-
-        let mut iter = s[1..(s.len() - 1)].chars().peekable();
-        while let Some(c) = iter.next() {
-            let newc = if c == '\\' {
-                match iter.next() {
-                    Some('b') => '\x08',
-                    Some('f') => '\x0c',
-                    Some('n') => '\n',
-                    Some('r') => '\r',
-                    Some('t') => '\t',
-                    Some('0'..='7') => {
-                        // TODO
-                        bail!("octal escapes not supported");
-                    }
-                    Some(n) => n,
-                    None => break,
-                }
-            } else if c == '\'' && iter.peek() == Some(&'\'') {
-                // doubled quote becomes just one quote
-                iter.next().unwrap()
-            } else {
-                c
-            };
-
-            result.push(newc);
-        }
-        Ok(result)
-    } else {
-        Ok(s.to_string())
-    }
-}
-
-#[test]
-fn test_postgresql_conf_escapes() -> Result<()> {
-    assert_eq!(escape_str("foo bar"), "'foo bar'");
-    // these don't need to be quoted
-    assert_eq!(escape_str("foo"), "foo");
-    assert_eq!(escape_str("123"), "123");
-    assert_eq!(escape_str("+123"), "+123");
-    assert_eq!(escape_str("-10"), "-10");
-    assert_eq!(escape_str("1foo"), "1foo");
-    assert_eq!(escape_str("foo1"), "foo1");
-    assert_eq!(escape_str("10MB"), "10MB");
-    assert_eq!(escape_str("-10kB"), "-10kB");
-
-    // these need quoting and/or escaping
-    assert_eq!(escape_str("foo bar"), "'foo bar'");
-    assert_eq!(escape_str("fo'o"), "'fo''o'");
-    assert_eq!(escape_str("fo\no"), "'fo\\no'");
-    assert_eq!(escape_str("fo\\o"), "'fo\\\\o'");
-    assert_eq!(escape_str("10 cats"), "'10 cats'");
-
-    // Test de-escaping
-    assert_eq!(deescape_str(&escape_str("foo"))?, "foo");
-    assert_eq!(deescape_str(&escape_str("fo'o\nba\\r"))?, "fo'o\nba\\r");
-    assert_eq!(deescape_str("'\\b\\f\\n\\r\\t'")?, "\x08\x0c\n\r\t");
-
-    // octal-escapes are currently not supported
-    assert!(deescape_str("'foo\\7\\07\\007'").is_err());
-
-    Ok(())
-}

control_plane/src/safekeeper.rs

@@ -1,281 +0,0 @@
-use std::io::Write;
-use std::net::TcpStream;
-use std::path::PathBuf;
-use std::process::Command;
-use std::sync::Arc;
-use std::time::Duration;
-use std::{io, result, thread};
-
-use anyhow::bail;
-use nix::errno::Errno;
-use nix::sys::signal::{kill, Signal};
-use nix::unistd::Pid;
-use postgres::Config;
-use reqwest::blocking::{Client, RequestBuilder, Response};
-use reqwest::{IntoUrl, Method};
-use thiserror::Error;
-use zenith_utils::http::error::HttpErrorBody;
-use zenith_utils::postgres_backend::AuthType;
-
-use crate::local_env::{LocalEnv, SafekeeperConf};
-use crate::read_pidfile;
-use crate::storage::PageServerNode;
-use zenith_utils::connstring::connection_address;
-use zenith_utils::connstring::connection_host_port;
-
-#[derive(Error, Debug)]
-pub enum SafekeeperHttpError {
-    #[error("Reqwest error: {0}")]
-    Transport(#[from] reqwest::Error),
-
-    #[error("Error: {0}")]
-    Response(String),
-}
-
-type Result<T> = result::Result<T, SafekeeperHttpError>;
-
-pub trait ResponseErrorMessageExt: Sized {
-    fn error_from_body(self) -> Result<Self>;
-}
-
-impl ResponseErrorMessageExt for Response {
-    fn error_from_body(self) -> Result<Self> {
-        let status = self.status();
-        if !(status.is_client_error() || status.is_server_error()) {
-            return Ok(self);
-        }
-
-        // reqwest do not export it's error construction utility functions, so lets craft the message ourselves
-        let url = self.url().to_owned();
-        Err(SafekeeperHttpError::Response(
-            match self.json::<HttpErrorBody>() {
-                Ok(err_body) => format!("Error: {}", err_body.msg),
-                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
-            },
-        ))
-    }
-}
-
-//
-// Control routines for safekeeper.
-//
-// Used in CLI and tests.
-//
-#[derive(Debug)]
-pub struct SafekeeperNode {
-    pub name: String,
-
-    pub conf: SafekeeperConf,
-
-    pub pg_connection_config: Config,
-    pub env: LocalEnv,
-    pub http_client: Client,
-    pub http_base_url: String,
-
-    pub pageserver: Arc<PageServerNode>,
-}
-
-impl SafekeeperNode {
-    pub fn from_env(env: &LocalEnv, conf: &SafekeeperConf) -> SafekeeperNode {
-        let pageserver = Arc::new(PageServerNode::from_env(env));
-
-        println!("initializing for {} for {}", conf.name, conf.http_port);
-
-        SafekeeperNode {
-            name: conf.name.clone(),
-            conf: conf.clone(),
-            pg_connection_config: Self::safekeeper_connection_config(conf.pg_port),
-            env: env.clone(),
-            http_client: Client::new(),
-            http_base_url: format!("http://localhost:{}/v1", conf.http_port),
-            pageserver,
-        }
-    }
-
-    /// Construct libpq connection string for connecting to this safekeeper.
-    fn safekeeper_connection_config(port: u16) -> Config {
-        // TODO safekeeper authentication not implemented yet
-        format!("postgresql://no_user@localhost:{}/no_db", port)
-            .parse()
-            .unwrap()
-    }
-
-    pub fn datadir_path(&self) -> PathBuf {
-        self.env.safekeeper_data_dir(&self.name)
-    }
-
-    pub fn pid_file(&self) -> PathBuf {
-        self.datadir_path().join("safekeeper.pid")
-    }
-
-    pub fn start(&self) -> anyhow::Result<()> {
-        print!(
-            "Starting safekeeper at '{}' in '{}'",
-            connection_address(&self.pg_connection_config),
-            self.datadir_path().display()
-        );
-        io::stdout().flush().unwrap();
-
-        // Configure connection to page server
-        //
-        // FIXME: We extract the host and port from the connection string instead of using
-        // the connection string directly, because the 'safekeeper' binary expects
-        // host:port format. That's a bit silly when we already have a full libpq connection
-        // string at hand.
-        let pageserver_conn = {
-            let (host, port) = connection_host_port(&self.pageserver.pg_connection_config);
-            format!("{}:{}", host, port)
-        };
-
-        let listen_pg = format!("localhost:{}", self.conf.pg_port);
-        let listen_http = format!("localhost:{}", self.conf.http_port);
-
-        let mut cmd = Command::new(self.env.safekeeper_bin()?);
-        cmd.args(&["-D", self.datadir_path().to_str().unwrap()])
-            .args(&["--listen-pg", &listen_pg])
-            .args(&["--listen-http", &listen_http])
-            .args(&["--pageserver", &pageserver_conn])
-            .args(&["--recall", "1 second"])
-            .arg("--daemonize")
-            .env_clear()
-            .env("RUST_BACKTRACE", "1");
-        if !self.conf.sync {
-            cmd.arg("--no-sync");
-        }
-
-        if self.env.pageserver.auth_type == AuthType::ZenithJWT {
-            cmd.env("PAGESERVER_AUTH_TOKEN", &self.env.pageserver.auth_token);
-        }
-
-        let var = "LLVM_PROFILE_FILE";
-        if let Some(val) = std::env::var_os(var) {
-            cmd.env(var, val);
-        }
-
-        if !cmd.status()?.success() {
-            bail!(
-                "Safekeeper failed to start. See '{}' for details.",
-                self.datadir_path().join("safekeeper.log").display()
-            );
-        }
-
-        // It takes a while for the safekeeper to start up. Wait until it is
-        // open for business.
-        const RETRIES: i8 = 15;
-        for retries in 1..RETRIES {
-            match self.check_status() {
-                Ok(_) => {
-                    println!("\nSafekeeper started");
-                    return Ok(());
-                }
-                Err(err) => {
-                    match err {
-                        SafekeeperHttpError::Transport(err) => {
-                            if err.is_connect() && retries < 5 {
-                                print!(".");
-                                io::stdout().flush().unwrap();
-                            } else {
-                                if retries == 5 {
-                                    println!() // put a line break after dots for second message
-                                }
-                                println!(
-                                    "Safekeeper not responding yet, err {} retrying ({})...",
-                                    err, retries
-                                );
-                            }
-                        }
-                        SafekeeperHttpError::Response(msg) => {
-                            bail!("safekeeper failed to start: {} ", msg)
-                        }
-                    }
-                    thread::sleep(Duration::from_secs(1));
-                }
-            }
-        }
-        bail!("safekeeper failed to start in {} seconds", RETRIES);
-    }
-
-    ///
-    /// Stop the server.
-    ///
-    /// If 'immediate' is true, we use SIGQUIT, killing the process immediately.
-    /// Otherwise we use SIGTERM, triggering a clean shutdown
-    ///
-    /// If the server is not running, returns success
-    ///
-    pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
-        let pid_file = self.pid_file();
-        if !pid_file.exists() {
-            println!("Safekeeper {} is already stopped", self.name);
-            return Ok(());
-        }
-        let pid = read_pidfile(&pid_file)?;
-        let pid = Pid::from_raw(pid);
-
-        let sig = if immediate {
-            println!("Stop safekeeper immediately");
-            Signal::SIGQUIT
-        } else {
-            println!("Stop safekeeper gracefully");
-            Signal::SIGTERM
-        };
-        match kill(pid, sig) {
-            Ok(_) => (),
-            Err(Errno::ESRCH) => {
-                println!(
-                    "Safekeeper with pid {} does not exist, but a PID file was found",
-                    pid
-                );
-                return Ok(());
-            }
-            Err(err) => bail!(
-                "Failed to send signal to safekeeper with pid {}: {}",
-                pid,
-                err.desc()
-            ),
-        }
-
-        let address = connection_address(&self.pg_connection_config);
-
-        // TODO Remove this "timeout" and handle it on caller side instead.
-        // Shutting down may take a long time,
-        // if safekeeper flushes a lot of data
-        for _ in 0..100 {
-            if let Err(_e) = TcpStream::connect(&address) {
-                println!("Safekeeper stopped receiving connections");
-
-                //Now check status
-                match self.check_status() {
-                    Ok(_) => {
-                        println!("Safekeeper status is OK. Wait a bit.");
-                        thread::sleep(Duration::from_secs(1));
-                    }
-                    Err(err) => {
-                        println!("Safekeeper status is: {}", err);
-                        return Ok(());
-                    }
-                }
-            } else {
-                println!("Safekeeper still receives connections");
-                thread::sleep(Duration::from_secs(1));
-            }
-        }
-
-        bail!("Failed to stop safekeeper with pid {}", pid);
-    }
-
-    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> RequestBuilder {
-        // TODO: authentication
-        //if self.env.auth_type == AuthType::ZenithJWT {
-        //    builder = builder.bearer_auth(&self.env.safekeeper_auth_token)
-        //}
-        self.http_client.request(method, url)
-    }
-
-    pub fn check_status(&self) -> Result<()> {
-        self.http_request(Method::GET, format!("{}/{}", self.http_base_url, "status"))
-            .send()?
-            .error_from_body()?;
-        Ok(())
-    }
-}

control_plane/src/storage.rs

@@ -1,59 +1,120 @@
-use std::io::Write;
+use anyhow::Result;
+use std::fs;
+use std::io;
+use std::net::SocketAddr;
 use std::net::TcpStream;
-use std::path::PathBuf;
+use std::path::{Path, PathBuf};
 use std::process::Command;
+use std::str::FromStr;
+use std::sync::atomic::{AtomicBool, Ordering};
+use std::sync::Arc;
+use std::thread;
 use std::time::Duration;
-use std::{io, result, thread};
 
-use anyhow::bail;
-use nix::errno::Errno;
-use nix::sys::signal::{kill, Signal};
-use nix::unistd::Pid;
-use pageserver::http::models::{BranchCreateRequest, TenantCreateRequest};
-use postgres::{Config, NoTls};
-use reqwest::blocking::{Client, RequestBuilder, Response};
-use reqwest::{IntoUrl, Method};
-use thiserror::Error;
-use zenith_utils::http::error::HttpErrorBody;
-use zenith_utils::postgres_backend::AuthType;
-use zenith_utils::zid::ZTenantId;
+use postgres::{Client, NoTls};
 
 use crate::local_env::LocalEnv;
-use crate::read_pidfile;
-use pageserver::branches::BranchInfo;
-use pageserver::tenant_mgr::TenantInfo;
-use zenith_utils::connstring::connection_address;
+use pageserver::ZTimelineId;
 
-#[derive(Error, Debug)]
-pub enum PageserverHttpError {
-    #[error("Reqwest error: {0}")]
-    Transport(#[from] reqwest::Error),
-
-    #[error("Error: {0}")]
-    Response(String),
+//
+// Collection of several example deployments useful for tests.
+//
+// I'm intendedly modelling storage and compute control planes as a separate entities
+// as it is closer to the actual setup.
+//
+pub struct TestStorageControlPlane {
+    pub wal_acceptors: Vec<WalAcceptorNode>,
+    pub pageserver: Arc<PageServerNode>,
+    pub test_done: AtomicBool,
+    pub repopath: PathBuf,
 }
 
-type Result<T> = result::Result<T, PageserverHttpError>;
+impl TestStorageControlPlane {
+    // Peek into the repository, to grab the timeline ID of given branch
+    pub fn get_branch_timeline(&self, branchname: &str) -> ZTimelineId {
+        let branchpath = self.repopath.join("refs/branches/".to_owned() + branchname);
 
-pub trait ResponseErrorMessageExt: Sized {
-    fn error_from_body(self) -> Result<Self>;
-}
+        ZTimelineId::from_str(&(fs::read_to_string(&branchpath).unwrap())).unwrap()
+    }
 
-impl ResponseErrorMessageExt for Response {
-    fn error_from_body(self) -> Result<Self> {
-        let status = self.status();
-        if !(status.is_client_error() || status.is_server_error()) {
-            return Ok(self);
+    // postgres <-> page_server
+    //
+    // Initialize a new repository and configure a page server to run in it
+    //
+    pub fn one_page_server(local_env: &LocalEnv) -> TestStorageControlPlane {
+        let repopath = local_env.repo_path.clone();
+
+        let pserver = Arc::new(PageServerNode {
+            env: local_env.clone(),
+            kill_on_exit: true,
+            listen_address: None,
+        });
+        pserver.start().unwrap();
+
+        TestStorageControlPlane {
+            wal_acceptors: Vec::new(),
+            pageserver: pserver,
+            test_done: AtomicBool::new(false),
+            repopath,
         }
+    }
 
-        // reqwest do not export it's error construction utility functions, so lets craft the message ourselves
-        let url = self.url().to_owned();
-        Err(PageserverHttpError::Response(
-            match self.json::<HttpErrorBody>() {
-                Ok(err_body) => format!("Error: {}", err_body.msg),
-                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
-            },
-        ))
+    // postgres <-> {wal_acceptor1, wal_acceptor2, ...}
+    pub fn fault_tolerant(local_env: &LocalEnv, redundancy: usize) -> TestStorageControlPlane {
+        let repopath = local_env.repo_path.clone();
+
+        let mut cplane = TestStorageControlPlane {
+            wal_acceptors: Vec::new(),
+            pageserver: Arc::new(PageServerNode {
+                env: local_env.clone(),
+                kill_on_exit: true,
+                listen_address: None,
+            }),
+            test_done: AtomicBool::new(false),
+            repopath,
+        };
+        cplane.pageserver.start().unwrap();
+
+        const WAL_ACCEPTOR_PORT: usize = 54321;
+
+        for i in 0..redundancy {
+            let wal_acceptor = WalAcceptorNode {
+                listen: format!("127.0.0.1:{}", WAL_ACCEPTOR_PORT + i)
+                    .parse()
+                    .unwrap(),
+                data_dir: local_env.repo_path.join(format!("wal_acceptor_{}", i)),
+                env: local_env.clone(),
+            };
+            wal_acceptor.init();
+            wal_acceptor.start();
+            cplane.wal_acceptors.push(wal_acceptor);
+        }
+        cplane
+    }
+
+    pub fn stop(&self) {
+        for wa in self.wal_acceptors.iter() {
+            let _ = wa.stop();
+        }
+        self.test_done.store(true, Ordering::Relaxed);
+    }
+
+    pub fn get_wal_acceptor_conn_info(&self) -> String {
+        self.wal_acceptors
+            .iter()
+            .map(|wa| wa.listen.to_string())
+            .collect::<Vec<String>>()
+            .join(",")
+    }
+
+    pub fn is_running(&self) -> bool {
+        self.test_done.load(Ordering::Relaxed)
+    }
+}
+
+impl Drop for TestStorageControlPlane {
+    fn drop(&mut self) {
+        self.stop();
     }
 }
 
@@ -62,109 +123,55 @@ impl ResponseErrorMessageExt for Response {
 //
 // Used in CLI and tests.
 //
-#[derive(Debug)]
 pub struct PageServerNode {
-    pub pg_connection_config: Config,
+    kill_on_exit: bool,
+    listen_address: Option<SocketAddr>,
     pub env: LocalEnv,
-    pub http_client: Client,
-    pub http_base_url: String,
 }
 
 impl PageServerNode {
     pub fn from_env(env: &LocalEnv) -> PageServerNode {
-        let password = if env.pageserver.auth_type == AuthType::ZenithJWT {
-            &env.pageserver.auth_token
-        } else {
-            ""
-        };
-
         PageServerNode {
-            pg_connection_config: Self::pageserver_connection_config(
-                password,
-                env.pageserver.pg_port,
-            ),
+            kill_on_exit: false,
+            listen_address: None, // default
             env: env.clone(),
-            http_client: Client::new(),
-            http_base_url: format!("http://localhost:{}/v1", env.pageserver.http_port),
         }
     }
 
-    /// Construct libpq connection string for connecting to the pageserver.
-    fn pageserver_connection_config(password: &str, port: u16) -> Config {
-        format!("postgresql://no_user:{}@localhost:{}/no_db", password, port)
-            .parse()
-            .unwrap()
-    }
-
-    pub fn init(&self, create_tenant: Option<&str>) -> anyhow::Result<()> {
-        let listen_pg = format!("localhost:{}", self.env.pageserver.pg_port);
-        let listen_http = format!("localhost:{}", self.env.pageserver.http_port);
-        let mut args = vec![
-            "--init",
-            "-D",
-            self.env.base_data_dir.to_str().unwrap(),
-            "--postgres-distrib",
-            self.env.pg_distrib_dir.to_str().unwrap(),
-            "--listen-pg",
-            &listen_pg,
-            "--listen-http",
-            &listen_http,
-        ];
-
-        let auth_type_str = &self.env.pageserver.auth_type.to_string();
-        if self.env.pageserver.auth_type != AuthType::Trust {
-            args.extend(&["--auth-validation-public-key-path", "auth_public_key.pem"]);
+    pub fn address(&self) -> SocketAddr {
+        match self.listen_address {
+            Some(addr) => addr,
+            None => "127.0.0.1:64000".parse().unwrap(),
         }
-        args.extend(&["--auth-type", auth_type_str]);
-
-        if let Some(tenantid) = create_tenant {
-            args.extend(&["--create-tenant", tenantid])
-        }
-
-        let mut cmd = Command::new(self.env.pageserver_bin()?);
-        cmd.args(args).env_clear().env("RUST_BACKTRACE", "1");
-
-        let var = "LLVM_PROFILE_FILE";
-        if let Some(val) = std::env::var_os(var) {
-            cmd.env(var, val);
-        }
-
-        if !cmd.status()?.success() {
-            bail!("pageserver init failed");
-        }
-
-        Ok(())
     }
 
     pub fn repo_path(&self) -> PathBuf {
-        self.env.pageserver_data_dir()
+        self.env.repo_path.clone()
     }
 
     pub fn pid_file(&self) -> PathBuf {
-        self.repo_path().join("pageserver.pid")
+        self.env.repo_path.join("pageserver.pid")
     }
 
-    pub fn start(&self) -> anyhow::Result<()> {
-        print!(
-            "Starting pageserver at '{}' in '{}'",
-            connection_address(&self.pg_connection_config),
+    pub fn start(&self) -> Result<()> {
+        println!(
+            "Starting pageserver at '{}' in {}",
+            self.address(),
             self.repo_path().display()
         );
-        io::stdout().flush().unwrap();
 
-        let mut cmd = Command::new(self.env.pageserver_bin()?);
-        cmd.args(&["-D", self.repo_path().to_str().unwrap()])
-            .arg("--daemonize")
+        let mut cmd = Command::new(self.env.zenith_distrib_dir.join("pageserver"));
+        cmd.args(&["-l", self.address().to_string().as_str()])
+            .arg("-d")
             .env_clear()
-            .env("RUST_BACKTRACE", "1");
-
-        let var = "LLVM_PROFILE_FILE";
-        if let Some(val) = std::env::var_os(var) {
-            cmd.env(var, val);
-        }
+            .env("RUST_BACKTRACE", "1")
+            .env("ZENITH_REPO_DIR", self.repo_path())
+            .env("PATH", self.env.pg_bin_dir().to_str().unwrap()) // needs postres-wal-redo binary
+            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
+            .env("DYLD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap());
 
         if !cmd.status()?.success() {
-            bail!(
+            anyhow::bail!(
                 "Pageserver failed to start. See '{}' for details.",
                 self.repo_path().join("pageserver.log").display()
             );
@@ -172,194 +179,185 @@ impl PageServerNode {
 
         // It takes a while for the page server to start up. Wait until it is
         // open for business.
-        const RETRIES: i8 = 15;
-        for retries in 1..RETRIES {
-            match self.check_status() {
-                Ok(_) => {
-                    println!("\nPageserver started");
-                    return Ok(());
-                }
-                Err(err) => {
-                    match err {
-                        PageserverHttpError::Transport(err) => {
-                            if err.is_connect() && retries < 5 {
-                                print!(".");
-                                io::stdout().flush().unwrap();
-                            } else {
-                                if retries == 5 {
-                                    println!() // put a line break after dots for second message
-                                }
-                                println!(
-                                    "Pageserver not responding yet, err {} retrying ({})...",
-                                    err, retries
-                                );
-                            }
-                        }
-                        PageserverHttpError::Response(msg) => {
-                            bail!("pageserver failed to start: {} ", msg)
-                        }
-                    }
-                    thread::sleep(Duration::from_secs(1));
-                }
-            }
-        }
-        bail!("pageserver failed to start in {} seconds", RETRIES);
-    }
-
-    ///
-    /// Stop the server.
-    ///
-    /// If 'immediate' is true, we use SIGQUIT, killing the process immediately.
-    /// Otherwise we use SIGTERM, triggering a clean shutdown
-    ///
-    /// If the server is not running, returns success
-    ///
-    pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
-        let pid_file = self.pid_file();
-        if !pid_file.exists() {
-            println!("Pageserver is already stopped");
-            return Ok(());
-        }
-        let pid = Pid::from_raw(read_pidfile(&pid_file)?);
-
-        let sig = if immediate {
-            println!("Stop pageserver immediately");
-            Signal::SIGQUIT
-        } else {
-            println!("Stop pageserver gracefully");
-            Signal::SIGTERM
-        };
-        match kill(pid, sig) {
-            Ok(_) => (),
-            Err(Errno::ESRCH) => {
-                println!(
-                    "Pageserver with pid {} does not exist, but a PID file was found",
-                    pid
-                );
-                return Ok(());
-            }
-            Err(err) => bail!(
-                "Failed to send signal to pageserver with pid {}: {}",
-                pid,
-                err.desc()
-            ),
-        }
-
-        let address = connection_address(&self.pg_connection_config);
-
-        // TODO Remove this "timeout" and handle it on caller side instead.
-        // Shutting down may take a long time,
-        // if pageserver checkpoints a lot of data
-        for _ in 0..100 {
-            if let Err(_e) = TcpStream::connect(&address) {
-                println!("Pageserver stopped receiving connections");
-
-                //Now check status
-                match self.check_status() {
-                    Ok(_) => {
-                        println!("Pageserver status is OK. Wait a bit.");
-                        thread::sleep(Duration::from_secs(1));
-                    }
-                    Err(err) => {
-                        println!("Pageserver status is: {}", err);
-                        return Ok(());
-                    }
-                }
+        for retries in 1..15 {
+            let client = self.page_server_psql_client();
+            if client.is_ok() {
+                break;
             } else {
-                println!("Pageserver still receives connections");
+                println!("page server not responding yet, retrying ({})...", retries);
                 thread::sleep(Duration::from_secs(1));
             }
         }
+        Ok(())
+    }
 
-        bail!("Failed to stop pageserver with pid {}", pid);
+    pub fn stop(&self) -> Result<()> {
+        let pidfile = self.pid_file();
+        let pid = read_pidfile(&pidfile)?;
+
+        let status = Command::new("kill")
+            .arg(&pid)
+            .env_clear()
+            .status()
+            .expect("failed to execute kill");
+
+        if !status.success() {
+            anyhow::bail!("Failed to kill pageserver with pid {}", pid);
+        }
+
+        // await for pageserver stop
+        for _ in 0..5 {
+            let stream = TcpStream::connect(self.address());
+            if let Err(_e) = stream {
+                return Ok(());
+            }
+            println!("Stopping pageserver on {}", self.address());
+            thread::sleep(Duration::from_secs(1));
+        }
+
+        // ok, we failed to stop pageserver, let's panic
+        if !status.success() {
+            anyhow::bail!("Failed to stop pageserver with pid {}", pid);
+        } else {
+            Ok(())
+        }
     }
 
     pub fn page_server_psql(&self, sql: &str) -> Vec<postgres::SimpleQueryMessage> {
-        let mut client = self.pg_connection_config.connect(NoTls).unwrap();
+        let connstring = format!(
+            "host={} port={} dbname={} user={}",
+            self.address().ip(),
+            self.address().port(),
+            "no_db",
+            "no_user",
+        );
+        let mut client = Client::connect(connstring.as_str(), NoTls).unwrap();
 
         println!("Pageserver query: '{}'", sql);
         client.simple_query(sql).unwrap()
     }
 
-    pub fn page_server_psql_client(&self) -> result::Result<postgres::Client, postgres::Error> {
-        self.pg_connection_config.connect(NoTls)
-    }
-
-    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> RequestBuilder {
-        let mut builder = self.http_client.request(method, url);
-        if self.env.pageserver.auth_type == AuthType::ZenithJWT {
-            builder = builder.bearer_auth(&self.env.pageserver.auth_token)
-        }
-        builder
-    }
-
-    pub fn check_status(&self) -> Result<()> {
-        self.http_request(Method::GET, format!("{}/{}", self.http_base_url, "status"))
-            .send()?
-            .error_from_body()?;
-        Ok(())
-    }
-
-    pub fn tenant_list(&self) -> Result<Vec<TenantInfo>> {
-        Ok(self
-            .http_request(Method::GET, format!("{}/{}", self.http_base_url, "tenant"))
-            .send()?
-            .error_from_body()?
-            .json()?)
-    }
-
-    pub fn tenant_create(&self, tenantid: ZTenantId) -> Result<()> {
-        Ok(self
-            .http_request(Method::POST, format!("{}/{}", self.http_base_url, "tenant"))
-            .json(&TenantCreateRequest {
-                tenant_id: tenantid,
-            })
-            .send()?
-            .error_from_body()?
-            .json()?)
-    }
-
-    pub fn branch_list(&self, tenantid: &ZTenantId) -> Result<Vec<BranchInfo>> {
-        Ok(self
-            .http_request(
-                Method::GET,
-                format!("{}/branch/{}", self.http_base_url, tenantid),
-            )
-            .send()?
-            .error_from_body()?
-            .json()?)
-    }
-
-    pub fn branch_create(
+    pub fn page_server_psql_client(
         &self,
-        branch_name: &str,
-        startpoint: &str,
-        tenantid: &ZTenantId,
-    ) -> Result<BranchInfo> {
-        Ok(self
-            .http_request(Method::POST, format!("{}/branch", self.http_base_url))
-            .json(&BranchCreateRequest {
-                tenant_id: tenantid.to_owned(),
-                name: branch_name.to_owned(),
-                start_point: startpoint.to_owned(),
-            })
-            .send()?
-            .error_from_body()?
-            .json()?)
-    }
-
-    pub fn branch_get_by_name(
-        &self,
-        tenantid: &ZTenantId,
-        branch_name: &str,
-    ) -> Result<BranchInfo> {
-        Ok(self
-            .http_request(
-                Method::GET,
-                format!("{}/branch/{}/{}", self.http_base_url, tenantid, branch_name),
-            )
-            .send()?
-            .error_for_status()?
-            .json()?)
+    ) -> std::result::Result<postgres::Client, postgres::Error> {
+        let connstring = format!(
+            "host={} port={} dbname={} user={}",
+            self.address().ip(),
+            self.address().port(),
+            "no_db",
+            "no_user",
+        );
+        Client::connect(connstring.as_str(), NoTls)
     }
 }
+
+impl Drop for PageServerNode {
+    fn drop(&mut self) {
+        if self.kill_on_exit {
+            let _ = self.stop();
+        }
+    }
+}
+
+//
+// Control routines for WalAcceptor.
+//
+// Now used only in test setups.
+//
+pub struct WalAcceptorNode {
+    listen: SocketAddr,
+    data_dir: PathBuf,
+    env: LocalEnv,
+}
+
+impl WalAcceptorNode {
+    pub fn init(&self) {
+        if self.data_dir.exists() {
+            fs::remove_dir_all(self.data_dir.clone()).unwrap();
+        }
+        fs::create_dir_all(self.data_dir.clone()).unwrap();
+    }
+
+    pub fn start(&self) {
+        println!(
+            "Starting wal_acceptor in {} listening '{}'",
+            self.data_dir.to_str().unwrap(),
+            self.listen
+        );
+
+        let status = Command::new(self.env.zenith_distrib_dir.join("wal_acceptor"))
+            .args(&["-D", self.data_dir.to_str().unwrap()])
+            .args(&["-l", self.listen.to_string().as_str()])
+            .args(&["--systemid", &self.env.systemid.to_string()])
+            // Tell page server it can receive WAL from this WAL safekeeper
+            // FIXME: If there are multiple safekeepers, they will all inform
+            // the page server. Only the last "notification" will stay in effect.
+            // So it's pretty random which safekeeper the page server will connect to
+            .args(&["--pageserver", "127.0.0.1:64000"])
+            .arg("-d")
+            .arg("-n")
+            .status()
+            .expect("failed to start wal_acceptor");
+
+        if !status.success() {
+            panic!("wal_acceptor start failed");
+        }
+    }
+
+    pub fn stop(&self) -> std::result::Result<(), io::Error> {
+        println!("Stopping wal acceptor on {}", self.listen);
+        let pidfile = self.data_dir.join("wal_acceptor.pid");
+        let pid = read_pidfile(&pidfile)?;
+        // Ignores any failures when running this command
+        let _status = Command::new("kill")
+            .arg(pid)
+            .env_clear()
+            .status()
+            .expect("failed to execute kill");
+
+        Ok(())
+    }
+}
+
+impl Drop for WalAcceptorNode {
+    fn drop(&mut self) {
+        self.stop().unwrap();
+    }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+
+pub struct WalProposerNode {
+    pub pid: u32,
+}
+
+impl WalProposerNode {
+    pub fn stop(&self) {
+        let status = Command::new("kill")
+            .arg(self.pid.to_string())
+            .env_clear()
+            .status()
+            .expect("failed to execute kill");
+
+        if !status.success() {
+            panic!("kill start failed");
+        }
+    }
+}
+
+impl Drop for WalProposerNode {
+    fn drop(&mut self) {
+        self.stop();
+    }
+}
+
+/// Read a PID file
+///
+/// This should contain an unsigned integer, but we return it as a String
+/// because our callers only want to pass it back into a subcommand.
+fn read_pidfile(pidfile: &Path) -> std::result::Result<String, io::Error> {
+    fs::read_to_string(pidfile).map_err(|err| {
+        eprintln!("failed to read pidfile {:?}: {:?}", pidfile, err);
+        err
+    })
+}

docker-entrypoint.sh

@@ -1,13 +0,0 @@
-#!/bin/sh
-set -eux
-
-if [ "$1" = 'pageserver' ]; then
-    if [ ! -d "/data/tenants" ]; then
-        echo "Initializing pageserver data directory"
-        pageserver --init -D /data --postgres-distrib /usr/local
-    fi
-    echo "Staring pageserver at 0.0.0.0:6400"
-    pageserver -l 0.0.0.0:6400 --listen-http 0.0.0.0:9898 -D /data
-else
-    "$@"
-fi

docs/README.md

@@ -1,14 +0,0 @@
-# Zenith documentation
-
-## Table of contents
-
-- [authentication.md](authentication.md) — pageserver JWT authentication.
-- [docker.md](docker.md) — Docker images and building pipeline.
-- [glossary.md](glossary.md) — Glossary of all the terms used in codebase.
-- [multitenancy.md](multitenancy.md) — how multitenancy is organized in the pageserver and Zenith CLI.
-- [sourcetree.md](sourcetree.md) — Overview of the source tree layeout.
-- [pageserver/README](/pageserver/README) — pageserver overview.
-- [postgres_ffi/README](/postgres_ffi/README) — Postgres FFI overview.
-- [test_runner/README.md](/test_runner/README.md) — tests infrastructure overview.
-- [walkeeper/README](/walkeeper/README) — WAL service overview.
-- [core_changes.md](core_changes.md) - Description of Zenith changes in Postgres core

docs/authentication.md

@@ -1,30 +0,0 @@
-## Authentication
-
-### Overview
-
-Current state of authentication includes usage of JWT tokens in communication between compute and pageserver and between CLI and pageserver. JWT token is signed using RSA keys. CLI generates a key pair during call to `zenith init`. Using following openssl commands:
-
-```bash
-openssl genrsa -out private_key.pem 2048
-openssl rsa -in private_key.pem -pubout -outform PEM -out public_key.pem
-```
-
-CLI also generates signed token and saves it in the config for later access to pageserver. Now authentication is optional. Pageserver has two variables in config: `auth_validation_public_key_path` and `auth_type`, so when auth type present and set to `ZenithJWT` pageserver will require authentication for connections. Actual JWT is passed in password field of connection string. There is a caveat for psql, it silently truncates passwords to 100 symbols, so to correctly pass JWT via psql you have to either use PGPASSWORD environment variable, or store password in psql config file.
-
-Currently there is no authentication between compute and safekeepers, because this communication layer is under heavy refactoring. After this refactoring support for authentication will be added there too. Now safekeeper supports "hardcoded" token passed via environment variable to be able to use callmemaybe command in pageserver.
-
-Compute uses token passed via environment variable to communicate to pageserver and in the future to the safekeeper too.
-
-JWT authentication now supports two scopes: tenant and pageserverapi. Tenant scope is intended for use in tenant related api calls, e.g. create_branch. Compute launched for particular tenant also uses this scope. Scope pageserver api is intended to be used by console to manage pageserver. For now we have only one management operation - create tenant.
-
-Examples for token generation in python:
-
-```python
-# generate pageserverapi token
-management_token = jwt.encode({"scope": "pageserverapi"}, auth_keys.priv, algorithm="RS256")
-
-# generate tenant token
-tenant_token = jwt.encode({"scope": "tenant", "tenant_id": ps.initial_tenant}, auth_keys.priv, algorithm="RS256")
-```
-
-Utility functions to work with jwts in rust are located in zenith_utils/src/auth.rs

docs/core_changes.md

@@ -1,202 +0,0 @@
-1. Add t_cid to XLOG record
-- Why?
-  The cmin/cmax on a heap page is a real bummer. I don't see any other way to fix that than bite the bullet and modify the WAL-logging routine to include the cmin/cmax.
-
-  To recap, the problem is that the XLOG_HEAP_INSERT record does not include the command id of the inserted row. And same with deletion/update. So in the primary, a row is inserted with current xmin + cmin. But in the replica, the cmin is always set to 1. That works, because the command id is only relevant to the inserting transaction itself. After commit/abort, no one cares abut it anymore.
-
-- Alternatives?
-  I don't know
-
-2. Add PD_WAL_LOGGED.
-- Why?
-  Postgres sometimes writes data to the page before it is wal-logged. If such page ais swapped out, we  will loose this change. The problem is currently solved by setting PD_WAL_LOGGED bit in page header. When page without this bit set is written to the SMGR, then it is forced to be written to the WAL as FPI using log_newpage_copy() function.
-
-  There was wrong assumption that it can happen only during construction of some exotic indexes (like gist). It is not true. The same situation can happen with COPY,VACUUM and when record hint bits are set.
-
-- Discussion:
-  https://discord.com/channels/869525774699462656/882681420986851359
-
-- Alternatives:
-  Do not store this flag in page header, but associate this bit with shared buffer. Logically it is more correct but in practice we will get not advantages: neither in space, neither in CPU overhead.
-
-
-3. XLogReadBufferForRedo not always loads and pins requested buffer. So we need to add extra checks that buffer is really pinned. Also do not use BufferGetBlockNumber for buffer returned by XLogReadBufferForRedo.
-- Why?
-  XLogReadBufferForRedo is not pinning pages which are not requested by wal-redo. It is specific only for wal-redo Postgres.
-
-- Alternatives?
-  No
-
-
-4. Eliminate reporting of some warnings related with hint bits, for example
-"page is not marked all-visible but visibility map bit is set in relation".
-- Why?
-  Hint bit may be not WAL logged.
-
-- Alternative?
-  Always wal log any page changes.
-
-
-5. Maintain last written LSN.
-- Why?
-  When compute node requests page from page server, we need to specify LSN. Ideally it should be LSN
-  of WAL record performing last update of this pages. But we do not know it, because we do not have page.
-  We can use current WAL flush position, but in this case there is high probability that page server
-  will be blocked until this peace of WAL is delivered.
-  As better approximation we can keep max LSN of written page. It will be better to take in account LSNs only of evicted pages,
-  but SMGR API doesn't provide such knowledge.
-
-- Alternatives?
-  Maintain map of LSNs of evicted pages.
-
-
-6. Launching Postgres without WAL.
-- Why?
-  According to Zenith architecture compute node is stateless. So when we are launching
-  compute node, we need to provide some dummy PG_DATADIR. Relation pages
-  can be requested on demand from page server. But Postgres still need some non-relational data:
-  control and configuration files, SLRUs,...
-  It is currently implemented  using basebackup (do not mix with pg_basebackup) which is created
-  by pageserver. It includes in this tarball config/control files, SLRUs and required directories.
-  As far as pageserver do not have original (non-scattered) WAL segments, it includes in
-  this tarball dummy WAL segment which contains only SHUTDOWN_CHECKPOINT record at the beginning of segment,
-  which redo field points to the end of wal. It allows to load checkpoint record in more or less
-  standard way with minimal changes of Postgres, but then some special handling is needed,
-  including restoring previous record position from zenith.signal file.
-  Also we have to correctly initialize header of last WAL page (pointed by checkpoint.redo)
-  to pass checks performed by XLogReader.
-
-- Alternatives?
-  We may not include fake WAL segment in tarball at all and modify xlog.c to load checkpoint record
-  in special way. But it may only increase number of changes in xlog.c
-
-7. Add redo_read_buffer_filter callback to XLogReadBufferForRedoExtended
-- Why?
-  We need a way in wal-redo Postgres to ignore pages which are not requested by pageserver.
-  So wal-redo Postgres reconstructs only requested page and for all other returns BLK_DONE
-  which means that recovery for them is not needed.
-
-- Alternatives?
-  No
-
-8. Enforce WAL logging of sequence updates.
-- Why?
-  Due to performance reasons Postgres don't want to log each fetching of a value from a sequence,
-  so we pre-log a few fetches in advance. In the event of crash we can lose
-  (skip over) as many values as we pre-logged.
-  But it doesn't work with Zenith because page with sequence value can be evicted from buffer cache
-  and we will get a gap in sequence values even without crash.
-
-- Alternatives:
-  Do not try to preserve sequential order but avoid performance penalty.
-
-
-9. Treat unlogged tables as normal (permanent) tables.
-- Why?
-  Unlogged tables are not transient, so them have to survive node restart (unlike temporary tables).
-  But as far as compute node is stateless, we need to persist their data to storage node.
-  And it can only be done through the WAL.
-
-- Alternatives?
-  * Store unlogged tables locally (violates requirement of stateless compute nodes).
-  * Prohibit unlogged tables at all.
-
-
-10. Support start Postgres in wal-redo mode
-- Why?
-  To be able to apply WAL record and reconstruct pages at page server.
-
-- Alternatives?
-  * Rewrite redo handlers in Rust
-  * Do not reconstruct pages at page server at all and do it at compute node.
-
-
-11. WAL proposer
-- Why?
-  WAL proposer is communicating with safekeeper and ensures WAL durability by quorum writes.
-  It is currently implemented as patch to standard WAL sender.
-
-- Alternatives?
-  Can be moved to extension if some extra callbacks will be added to wal sender code.
-
-
-12. Secure Computing BPF API wrapper.
-- Why?
-  Pageserver delegates complex WAL decoding duties to Postgres,
-  which means that the latter might fall victim to carefully designed
-  malicious WAL records and start doing harmful things to the system.
-  To prevent this, it has been decided to limit possible interactions
-  with the outside world using the Secure Computing BPF mode.
-
-- Alternatives:
-  * Rewrite redo handlers in Rust.
-  * Add more checks to guarantee correctness of WAL records.
-  * Move seccomp.c to extension
-  * Many other discussed approaches to neutralize incorrect WAL records vulnerabilities.
-
-
-13. Callbacks for replica feedbacks
-- Why?
-  Allowing waproposer to interact with walsender code.
-
-- Alternatives
-  Copy walsender code to walproposer.
-
-
-14. Support multiple SMGR implementations.
-- Why?
-  Postgres provides abstract API for storage manager but it has only one implementation
-  and provides no way to replace it with custom storage manager.
-
-- Alternatives?
-  None.
-
-
-15. Calculate database size as sum of all database relations.
-- Why?
-  Postgres is calculating database size by traversing data directory
-  but as far as Zenith compute node is stateless we can not do it.
-
-- Alternatives?
-  Send this request directly to pageserver and calculate real (physical) size
-  of Zenith representation of database/timeline, rather than sum logical size of all relations.
-
-
------------------------------------------------
-Not currently committed but proposed:
-
-1. Disable ring buffer buffer manager strategies
-- Why?
-  Postgres tries to avoid cache flushing by bulk operations (copy, seqscan, vacuum,...).
-  Even if there are free space in buffer cache, pages may be evicted.
-  Negative effect of it can be somehow compensated by file system cache, but in case of Zenith
-  cost of requesting page from page server is much higher.
-
-- Alternatives?
-  Instead of just prohibiting ring buffer we may try to implement more flexible eviction policy,
-  for example copy evicted page from ring buffer to some other buffer if there is free space
-  in buffer cache.
-
-2. Disable marking page as dirty when hint bits are set.
-- Why?
-  Postgres has to modify page twice: first time when some tuple is updated and second time when
-  hint bits are set. Wal logging hint bits updates requires FPI which significantly increase size of WAL.
-
-- Alternatives?
-  Add special WAL record for setting page hints.
-
-3. Prefetching
-- Why?
-  As far as pages in Zenith are loaded on demand, to reduce node startup time
-  and also sppedup some massive queries we need some mechanism for bulk loading to
-  reduce page request round-trip overhead.
-
-  Currently Postgres is supporting prefetching only for bitmap scan.
-  In Zenith we also use prefetch for sequential and index scan. For sequential scan we prefetch
-  some number of following pages. For index scan we prefetch pages of heap relation addressed by TIDs.
-
-4. Prewarming.
-- Why?
-  Short downtime (or, in other words, fast compute node restart time) is one of the key feature of Zenith.
-  But overhead of request-response round-trip for loading pages on demand can make started node warm-up quite slow.
-  We can capture state of compute node buffer cache and send bulk request for this pages at startup.

docs/docker.md

@@ -1,38 +0,0 @@
-# Docker images of Zenith
-
-## Images
-
-Currently we build two main images:
-
-- [zenithdb/zenith](https://hub.docker.com/repository/docker/zenithdb/zenith) — image with pre-built `pageserver`, `safekeeper` and `proxy` binaries and all the required runtime dependencies. Built from [/Dockerfile](/Dockerfile).
-- [zenithdb/compute-node](https://hub.docker.com/repository/docker/zenithdb/compute-node) — compute node image with pre-built Postgres binaries from [zenithdb/postgres](https://github.com/zenithdb/postgres).
-
-And two intermediate images used either to reduce build time or to deliver some additional binary tools from other repos:
-
-- [zenithdb/build](https://hub.docker.com/repository/docker/zenithdb/build) — image with all the dependencies required to build Zenith and compute node images. This image is based on `rust:slim-buster`, so it also has a proper `rust` environment. Built from [/Dockerfile.build](/Dockerfile.build).
-- [zenithdb/compute-tools](https://hub.docker.com/repository/docker/zenithdb/compute-tools) — compute node configuration management tools.
-
-## Building pipeline
-
-1. Image `zenithdb/compute-tools` is re-built automatically.
-
-2. Image `zenithdb/build` is built manually. If you want to introduce any new compile time dependencies to Zenith or compute node you have to update this image as well, build it and push to Docker Hub.
-
-Build:
-```sh
-docker build -t zenithdb/build:buster -f Dockerfile.build .
-```
-
-Login:
-```sh
-docker login
-```
-
-Push to Docker Hub:
-```sh
-docker push zenithdb/build:buster
-```
-
-3. Image `zenithdb/compute-node` is built independently in the [zenithdb/postgres](https://github.com/zenithdb/postgres) repo.
-
-4. Image `zenithdb/zenith` is built in this repo after a successful `release` tests run and pushed to Docker Hub automatically.

docs/glossary.md

@@ -1,221 +0,0 @@
-# Glossary
-
-### Authentication
-
-### Base image (page image)
-
-### Basebackup
-
-A tarball with files needed to bootstrap a compute node[] and a corresponding command to create it.
-NOTE:It has nothing to do with PostgreSQL pg_basebackup.
-
-### Branch
-
-We can create branch at certain LSN using `zenith branch` command.
-Each Branch lives in a corresponding timeline[] and has an ancestor[].
-
-
-### Checkpoint (PostgreSQL)
-
-NOTE: This is an overloaded term.
-
-A checkpoint record in the WAL marks a point in the WAL sequence at which it is guaranteed that all data files have been updated with all information from shared memory modified before that checkpoint; 
-
-### Checkpoint (Layered repository)
-
-NOTE: This is an overloaded term.
-
-Whenever enough WAL has been accumulated in memory, the page server []
-writes out the changes from in-memory layers into new layer files[]. This process
-is called "checkpointing". The page server only creates layer files for
-relations that have been modified since the last checkpoint. 
-
-Configuration parameter `checkpoint_distance` defines the distance
-from current LSN to perform checkpoint of in-memory layers.
-Default is `DEFAULT_CHECKPOINT_DISTANCE`.
-Set this parameter to `0` to force checkpoint of every layer.
-
-Configuration parameter `checkpoint_period` defines the interval between checkpoint iterations.
-Default is `DEFAULT_CHECKPOINT_PERIOD`.
-### Compute node
-
-Stateless Postgres node that stores data in pageserver.
-
-### Garbage collection
-
-The process of removing old on-disk layers that are not needed by any timeline anymore.
-### Fork
-
-Each of the separate segmented file sets in which a relation is stored. The main fork is where the actual data resides. There also exist two secondary forks for metadata: the free space map and the visibility map.
-Each PostgreSQL fork is considered a separate relish.
-
-### Layer
-
-A layer contains data needed to reconstruct any page versions within the
-layer's Segment and range of LSNs.
-
-There are two kinds of layers, in-memory and on-disk layers. In-memory
-layers are used to ingest incoming WAL, and provide fast access
-to the recent page versions. On-disk layers are stored as files on disk, and
-are immutable. See pageserver/src/layered_repository/README.md for more.
-
-### Layer file (on-disk layer)
-
-Layered repository on-disk format is based on immutable files.  The
-files are called "layer files". Each file corresponds to one RELISH_SEG_SIZE
-segment of a PostgreSQL relation fork. There are two kinds of layer
-files: image files and delta files. An image file contains a
-"snapshot" of the segment at a particular LSN, and a delta file
-contains WAL records applicable to the segment, in a range of LSNs.
-
-### Layer map
-
-The layer map tracks what layers exist for all the relishes in a timeline.
-### Layered repository
-
-Zenith repository implementation that keeps data in layers.
-### LSN
-
-
-### Page (block)
-
-The basic structure used to store relation data. All pages are of the same size.
-This is the unit of data exchange between compute node and pageserver.
-
-### Pageserver
-
-Zenith storage engine: repositories + wal receiver + page service + wal redo.
-
-### Page service
-
-The Page Service listens for GetPage@LSN requests from the Compute Nodes,
-and responds with pages from the repository.
-
-
-### PITR (Point-in-time-recovery)
-
-PostgreSQL's ability to restore up to a specified LSN.
-
-### Primary node
-
-
-### Proxy
-
-Postgres protocol proxy/router.
-This service listens psql port, can check auth via external service
-and create new databases and accounts (control plane API in our case).
-
-### Relation
-
-The generic term in PostgreSQL for all objects in a database that have a name and a list of attributes defined in a specific order.
-
-### Relish
-
-We call each relation and other file that is stored in the
-repository a "relish". It comes from "rel"-ish, as in "kind of a
-rel", because it covers relations as well as other things that are
-not relations, but are treated similarly for the purposes of the
-storage layer.
-
-### Replication slot
-
-
-### Replica node
-
-
-### Repository
-
-Repository stores multiple timelines, forked off from the same initial call to 'initdb'
-and has associated WAL redo service.
-One repository corresponds to one Tenant.
-
-### Retention policy
-
-How much history do we need to keep around for PITR and read-only nodes?
-
-### Segment (PostgreSQL)
-
-NOTE: This is an overloaded term.
-
-A physical file that stores data for a given relation. File segments are
-limited in size by a compile-time setting (1 gigabyte by default), so if a
-relation exceeds that size, it is split into multiple segments.
-
-### Segment (Layered Repository)
-
-NOTE: This is an overloaded term.
-
-Segment is a RELISH_SEG_SIZE slice of relish (identified by a SegmentTag).
-
-### SLRU
-
-SLRUs include pg_clog, pg_multixact/members, and
-pg_multixact/offsets. There are other SLRUs in PostgreSQL, but
-they don't need to be stored permanently (e.g. pg_subtrans),
-or we do not support them in zenith yet (pg_commit_ts).
-Each SLRU segment is considered a separate relish[].
-
-### Tenant (Multitenancy)
-Tenant represents a single customer, interacting with Zenith.
-Wal redo[] activity, timelines[], layers[] are managed for each tenant independently.
-One pageserver[] can serve multiple tenants at once.
-One safekeeper 
-
-See `docs/multitenancy.md` for more.
-
-### Timeline
-
-Timeline accepts page changes and serves get_page_at_lsn() and
-get_rel_size() requests. The term "timeline" is used internally
-in the system, but to users they are exposed as "branches", with
-human-friendly names.
-
-NOTE: this has nothing to do with PostgreSQL WAL timelines.
-
-### XLOG
-
-PostgreSQL alias for WAL[].
-
-### WAL (Write-ahead log)
-
-The journal that keeps track of the changes in the database cluster as user- and system-invoked operations take place. It comprises many individual WAL records[] written sequentially to WAL files[].
-
-### WAL acceptor, WAL proposer
-
-In the context of the consensus algorithm, the Postgres
-compute node is also known as the WAL proposer, and the safekeeper is also known
-as the acceptor. Those are the standard terms in the Paxos algorithm.
-
-### WAL receiver (WAL decoder)
-
-The WAL receiver connects to the external WAL safekeeping service (or
-directly to the primary) using PostgreSQL physical streaming
-replication, and continuously receives WAL. It decodes the WAL records,
-and stores them to the repository.
-
-We keep one WAL receiver active per timeline.
-
-### WAL record
-
-A low-level description of an individual data change.
-
-### WAL redo
-
-A service that runs PostgreSQL in a special wal_redo mode
-to apply given WAL records over an old page image and return new page image.
-
-### WAL safekeeper
-
-One node that participates in the quorum. All the safekeepers
-together form the WAL service.
-
-### WAL segment (WAL file)
-
-Also known as WAL segment or WAL segment file. Each of the sequentially-numbered files that provide storage space for WAL. The files are all of the same predefined size and are written in sequential order, interspersing changes as they occur in multiple simultaneous sessions.
-
-### WAL service
-
-The service as whole that ensures that WAL is stored durably.
-
-### Web console
-

docs/multitenancy.md

@@ -1,59 +0,0 @@
-## Multitenancy
-
-### Overview
-
-Zenith supports multitenancy. One pageserver can serve multiple tenants at once. Tenants can be managed via zenith CLI. During page server setup tenant can be created using ```zenith init --create-tenant``` Also tenants can be added into the system on the fly without pageserver restart. This can be done using the following cli command: ```zenith tenant create``` Tenants use random identifiers which can be represented as a 32 symbols hexadecimal string. So zenith tenant create accepts desired tenant id as an optional argument. The concept of timelines/branches is working independently per tenant.
-
-### Tenants in other commands
-
-By default during `zenith init` new tenant is created on the pageserver. Newly created tenant's id is saved to cli config, so other commands can use it automatically if no direct arugment `--tenantid=<tenantid>` is provided. So generally tenantid more frequently appears in internal pageserver interface. Its commands take tenantid argument to distinguish to which tenant operation should be applied. CLI support creation of new tenants.
-
-Examples for cli:
-
-```sh
-zenith tenant list
-
-zenith tenant create // generates new id
-
-zenith tenant create ee6016ec31116c1b7c33dfdfca38892f
-
-zenith pg create main // default tenant from zenith init
-
-zenith pg create main --tenantid=ee6016ec31116c1b7c33dfdfca38892f
-
-zenith branch --tenantid=ee6016ec31116c1b7c33dfdfca38892f
-```
-
-### Data layout
-
-On the page server tenants introduce one level of indirection, so data directory structured the following way:
-```
-<pageserver working directory>
-├── pageserver.log
-├── pageserver.pid
-├── pageserver.toml
-└── tenants
-   ├── 537cffa58a4fa557e49e19951b5a9d6b
-   ├── de182bc61fb11a5a6b390a8aed3a804a
-   └── ee6016ec31116c1b7c33dfdfca38891f
-```
-Wal redo activity and timelines are managed for each tenant independently.
-
-For local environment used for example in tests there also new level of indirection for tenants. It touches `pgdatadirs` directory. Now it contains `tenants` subdirectory so the structure looks the following way:
-
-```
-pgdatadirs
-└── tenants
-   ├── de182bc61fb11a5a6b390a8aed3a804a
-   │  └── main
-   └── ee6016ec31116c1b7c33dfdfca38892f
-      └── main
-```
-
-### Changes to postgres
-
-Tenant id is passed to postgres via GUC the same way as the timeline. Tenant id is added to commands issued to pageserver, namely: pagestream, callmemaybe. Tenant id is also exists in ServerInfo structure, this is needed to pass the value to wal receiver to be able to forward it to the pageserver.
-
-### Safety
-
-For now particular tenant can only appear on a particular pageserver. Set of safekeepers are also pinned to particular (tenantid, timeline) pair so there can only be one writer for particular (tenantid, timeline).

docs/settings.md

@@ -1,128 +0,0 @@
-## Pageserver
-
-### listen_pg_addr
-
-Network interface and port number to listen at for connections from
-the compute nodes and safekeepers. The default is `127.0.0.1:64000`.
-
-### listen_http_addr
-
-Network interface and port number to listen at for admin connections.
-The default is `127.0.0.1:9898`.
-
-### checkpoint_distance
-
-`checkpoint_distance` is the amount of incoming WAL that is held in
-the open layer, before it's flushed to local disk. It puts an upper
-bound on how much WAL needs to be re-processed after a pageserver
-crash. It is a soft limit, the pageserver can momentarily go above it,
-but it will trigger a checkpoint operation to get it back below the
-limit.
-
-`checkpoint_distance` also determines how much WAL needs to be kept
-durable in the safekeeper.  The safekeeper must have capacity to hold
-this much WAL, with some headroom, otherwise you can get stuck in a
-situation where the safekeeper is full and stops accepting new WAL,
-but the pageserver is not flushing out and releasing the space in the
-safekeeper because it hasn't reached checkpoint_distance yet.
-
-`checkpoint_distance` also controls how often the WAL is uploaded to
-S3.
-
-The unit is # of bytes.
-
-### checkpoint_period
-
-The pageserver checks whether `checkpoint_distance` has been reached
-every `checkpoint_period` seconds. Default is 1 s, which should be
-fine.
-
-### gc_horizon
-
-`gz_horizon` determines how much history is retained, to allow
-branching and read replicas at an older point in time. The unit is #
-of bytes of WAL. Page versions older than this are garbage collected
-away.
-
-### gc_period
-
-Interval at which garbage collection is triggered. Default is 100 s.
-
-### superuser
-
-Name of the initial superuser role, passed to initdb when a new tenant
-is initialized. It doesn't affect anything after initialization. The
-default is Note: The default is 'zenith_admin', and the console
-depends on that, so if you change it, bad things will happen.
-
-### page_cache_size
-
-Size of the page cache, to hold materialized page versions. Unit is
-number of 8 kB blocks. The default is 8192, which means 64 MB.
-
-### max_file_descriptors
-
-Max number of file descriptors to hold open concurrently for accessing
-layer files. This should be kept well below the process/container/OS
-limit (see `ulimit -n`), as the pageserver also needs file descriptors
-for other files and for sockets for incoming connections.
-
-### postgres-distrib
-
-A directory with Postgres installation to use during pageserver activities.
-Inside that dir, a `bin/postgres` binary should be present.
-
-The default distrib dir is `./tmp_install/`.
-
-### workdir (-D)
-
-A directory in the file system, where pageserver will store its files.
-The default is `./.zenith/`.
-
-### Remote storage
-
-There's a way to automatically backup and restore some of the pageserver's data from working dir to the remote storage.
-The backup system is disabled by default and can be enabled for either of the currently available storages:
-
-#### Local FS storage
-
-##### remote-storage-local-path
-
-Pageserver can back up and restore some of its workdir contents to another directory.
-For that, only a path to that directory needs to be specified as a parameter.
-
-#### S3 storage
-
-Pageserver can back up and restore some of its workdir contents to S3.
-Full set of S3 credentials is needed for that as parameters:
-
-##### remote-storage-s3-bucket
-
-Name of the bucket to connect to, example: "some-sample-bucket".
-
-##### remote-storage-region
-
-Name of the region where the bucket is located at, example: "eu-north-1"
-
-##### remote-storage-access-key
-
-Access key to connect to the bucket ("login" part of the credentials), example: "AKIAIOSFODNN7EXAMPLE"
-
-##### remote-storage-secret-access-key
-
-Secret access key to connect to the bucket ("password" part of the credentials), example: "wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY"
-
-#### General remote storage configuration
-
-Pagesever allows only one remote storage configured concurrently and errors if parameters from multiple different remote configurations are used.
-No default values are used for the remote storage configuration parameters.
-
-##### remote-storage-max-concurrent-sync
-
-Max number of concurrent connections to open for uploading to or
-downloading from S3.
-The default value is 100.
-
-## safekeeper
-
-TODO

docs/sourcetree.md

@@ -1,139 +0,0 @@
-## Source tree layout
-
-Below you will find a brief overview of each subdir in the source tree in alphabetical order.
-
-`/control_plane`:
-
-Local control plane.
-Functions to start, configure and stop pageserver and postgres instances running as a local processes.
-Intended to be used in integration tests and in CLI tools for local installations.
-
-`/docs`:
-
-Documentaion of the Zenith features and concepts.
-Now it is mostly dev documentation.
-
-`/monitoring`:
-
-TODO
-
-`/pageserver`:
-
-Zenith storage service.
-The pageserver has a few different duties:
-
-- Store and manage the data.
-- Generate a tarball with files needed to bootstrap ComputeNode.
-- Respond to GetPage@LSN requests from the Compute Nodes.
-- Receive WAL from the WAL service and decode it.
-- Replay WAL that's applicable to the chunks that the Page Server maintains
-
-For more detailed info, see `/pageserver/README`
-
-`/postgres_ffi`:
-
-Utility functions for interacting with PostgreSQL file formats.
-Misc constants, copied from PostgreSQL headers.
-
-`/proxy`:
-
-Postgres protocol proxy/router.
-This service listens psql port, can check auth via external service
-and create new databases and accounts (control plane API in our case).
-
-`/test_runner`:
-
-Integration tests, written in Python using the `pytest` framework.
-
-`/vendor/postgres`:
-
-PostgreSQL source tree, with the modifications needed for Zenith.
-
-`/vendor/postgres/contrib/zenith`:
-
-PostgreSQL extension that implements storage manager API and network communications with remote page server.
-
-`/vendor/postgres/contrib/zenith_test_utils`:
-
-PostgreSQL extension that contains functions needed for testing and debugging.
-
-`/walkeeper`:
-
-The zenith WAL service that receives WAL from a primary compute nodes and streams it to the pageserver.
-It acts as a holding area and redistribution center for recently generated WAL.
-
-For more detailed info, see `/walkeeper/README`
-
-`/workspace_hack`:
-The workspace_hack crate exists only to pin down some dependencies.
-
-`/zenith`
-
-Main entry point for the 'zenith' CLI utility.
-TODO: Doesn't it belong to control_plane?
-
-`/zenith_metrics`:
-
-Helpers for exposing Prometheus metrics from the server.
-
-`/zenith_utils`:
-
-Helpers that are shared between other crates in this repository.
-
-## Using Python
-Note that Debian/Ubuntu Python packages are stale, as it commonly happens,
-so manual installation of dependencies is not recommended.
-
-A single virtual environment with all dependencies is described in the single `Pipfile`.
-
-### Prerequisites
-- Install Python 3.7 (the minimal supported version)
-    - Later version (e.g. 3.8) is ok if you don't write Python code
-    - You can install Python 3.7 separately, e.g.:
-      ```bash
-      # In Ubuntu
-      sudo add-apt-repository ppa:deadsnakes/ppa
-      sudo apt update
-      sudo apt install python3.7
-      ```
-- Install `pipenv`
-    - Exact version of `pipenv` is not important, you can use Debian/Ubuntu package `pipenv`.
-- Install dependencies via either
-  * `pipenv --python 3.7 install --dev` if you will write Python code, or
-  * `pipenv install` if you only want to run Python scripts and don't have Python 3.7.
-
-Run `pipenv shell` to activate the virtual environment.
-Alternatively, use `pipenv run` to run a single command in the venv, e.g. `pipenv run pytest`.
-
-### Obligatory checks
-We force code formatting via `yapf` and type hints via `mypy`.
-Run the following commands in the repository's root (next to `setup.cfg`):
-
-```bash
-pipenv run yapf -ri .  # All code is reformatted
-pipenv run mypy .  # Ensure there are no typing errors
-```
-
-**WARNING**: do not run `mypy` from a directory other than the root of the repository.
-Otherwise it will not find its configuration.
-
-Also consider:
-
-* Running `flake8` (or a linter of your choice, e.g. `pycodestyle`) and fixing possible defects, if any.
-* Adding more type hints to your code to avoid `Any`.
-
-### Changing dependencies
-You have to update `Pipfile.lock` if you have changed `Pipfile`:
-
-```bash
-pipenv --python 3.7 install --dev  # Re-create venv for Python 3.7 and install recent pipenv inside
-pipenv run pipenv --version  # Should be at least 2021.5.29
-pipenv run pipenv lock  # Regenerate Pipfile.lock
-```
-
-As the minimal supported version is Python 3.7 and we use it in CI,
-you have to use a Python 3.7 environment when updating `Pipfile.lock`.
-Otherwise some back-compatibility packages will be missing.
-
-It is also important to run recent `pipenv`.
-Older versions remove markers from `Pipfile.lock`.

integration_tests/.gitignore

@@ -0,0 +1 @@
+tmp_check/

integration_tests/Cargo.toml

@@ -0,0 +1,17 @@
+[package]
+name = "integration_tests"
+version = "0.1.0"
+authors = ["Stas Kelvich <stas@zenith.tech>"]
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+lazy_static = "1.4.0"
+rand = "0.8.3"
+postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+tokio-postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+
+pageserver = { path = "../pageserver" }
+walkeeper = { path = "../walkeeper" }
+control_plane = { path = "../control_plane" }

integration_tests/tests/test_compute.rs

@@ -0,0 +1,11 @@
+// test node resettlement to an empty datadir
+
+// TODO
+/*
+#[test]
+fn test_resettlement() {}
+
+// test seq scan of everythin after restart
+#[test]
+fn test_cold_seqscan() {}
+*/

integration_tests/tests/test_control_plane.rs

@@ -0,0 +1,8 @@
+// TODO
+/*
+#[test]
+fn test_actions() {}
+
+#[test]
+fn test_regress() {}
+*/

integration_tests/tests/test_pageserver.rs

@@ -0,0 +1,150 @@
+// mod control_plane;
+use control_plane::compute::ComputeControlPlane;
+use control_plane::local_env;
+use control_plane::local_env::PointInTime;
+use control_plane::storage::TestStorageControlPlane;
+
+// XXX: force all redo at the end
+// -- restart + seqscan won't read deleted stuff
+// -- pageserver api endpoint to check all rels
+#[test]
+fn test_redo_cases() {
+    let local_env = local_env::test_env("test_redo_cases");
+
+    // Start pageserver that reads WAL directly from that postgres
+    let storage_cplane = TestStorageControlPlane::one_page_server(&local_env);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+
+    // start postgres
+    let maintli = storage_cplane.get_branch_timeline("main");
+    let node = compute_cplane.new_test_node(maintli);
+    node.start().unwrap();
+
+    // check basic work with table
+    node.safe_psql(
+        "postgres",
+        "CREATE TABLE t(key int primary key, value text)",
+    );
+    node.safe_psql(
+        "postgres",
+        "INSERT INTO t SELECT generate_series(1,100000), 'payload'",
+    );
+    let count: i64 = node
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    assert_eq!(count, 5000050000);
+
+    // check 'create table as'
+    node.safe_psql("postgres", "CREATE TABLE t2 AS SELECT * FROM t");
+    let count: i64 = node
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    assert_eq!(count, 5000050000);
+}
+
+// Runs pg_regress on a compute node
+#[test]
+fn test_regress() {
+    let local_env = local_env::test_env("test_regress");
+
+    // Start pageserver that reads WAL directly from that postgres
+    let storage_cplane = TestStorageControlPlane::one_page_server(&local_env);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+
+    // start postgres
+    let maintli = storage_cplane.get_branch_timeline("main");
+    let node = compute_cplane.new_test_node(maintli);
+    node.start().unwrap();
+
+    let status = node.pg_regress();
+    assert!(status.success());
+}
+
+// Runs pg_bench on a compute node
+#[test]
+fn pgbench() {
+    let local_env = local_env::test_env("pgbench");
+
+    // Start pageserver that reads WAL directly from that postgres
+    let storage_cplane = TestStorageControlPlane::one_page_server(&local_env);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+
+    // start postgres
+    let maintli = storage_cplane.get_branch_timeline("main");
+    let node = compute_cplane.new_test_node(maintli);
+    node.start().unwrap();
+
+    let status = node.pg_bench(10, 100);
+    assert!(status.success());
+}
+
+// Run two postgres instances on one pageserver, on different timelines
+#[test]
+fn test_pageserver_two_timelines() {
+    let local_env = local_env::test_env("test_pageserver_two_timelines");
+
+    // Start pageserver that reads WAL directly from that postgres
+    let storage_cplane = TestStorageControlPlane::one_page_server(&local_env);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+
+    let maintli = storage_cplane.get_branch_timeline("main");
+
+    // Create new branch at the end of 'main'
+    let startpoint = local_env::find_end_of_wal(&local_env, maintli).unwrap();
+    local_env::create_branch(
+        &local_env,
+        "experimental",
+        PointInTime {
+            timelineid: maintli,
+            lsn: startpoint,
+        },
+    )
+    .unwrap();
+    let experimentaltli = storage_cplane.get_branch_timeline("experimental");
+
+    // Launch postgres instances on both branches
+    let node1 = compute_cplane.new_test_node(maintli);
+    let node2 = compute_cplane.new_test_node(experimentaltli);
+    node1.start().unwrap();
+    node2.start().unwrap();
+
+    // check node1
+    node1.safe_psql(
+        "postgres",
+        "CREATE TABLE t(key int primary key, value text)",
+    );
+    node1.safe_psql(
+        "postgres",
+        "INSERT INTO t SELECT generate_series(1,100000), 'payload'",
+    );
+    let count: i64 = node1
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    assert_eq!(count, 5000050000);
+
+    // check node2
+    node2.safe_psql(
+        "postgres",
+        "CREATE TABLE t(key int primary key, value text)",
+    );
+    node2.safe_psql(
+        "postgres",
+        "INSERT INTO t SELECT generate_series(100000,200000), 'payload'",
+    );
+    let count: i64 = node2
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    assert_eq!(count, 15000150000);
+}

integration_tests/tests/test_wal_acceptor.rs

@@ -0,0 +1,355 @@
+// Restart acceptors one by one while compute is under the load.
+use control_plane::compute::ComputeControlPlane;
+use control_plane::local_env;
+use control_plane::local_env::PointInTime;
+use control_plane::storage::TestStorageControlPlane;
+use pageserver::ZTimelineId;
+
+use rand::Rng;
+use std::sync::Arc;
+use std::time::SystemTime;
+use std::{thread, time};
+
+const DOWNTIME: u64 = 2;
+
+#[test]
+//#[ignore]
+fn test_embedded_wal_proposer() {
+    let local_env = local_env::test_env("test_embedded_wal_proposer");
+
+    const REDUNDANCY: usize = 3;
+    let storage_cplane = TestStorageControlPlane::fault_tolerant(&local_env, REDUNDANCY);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+    let wal_acceptors = storage_cplane.get_wal_acceptor_conn_info();
+
+    // start postgres
+    let maintli = storage_cplane.get_branch_timeline("main");
+    let node = compute_cplane.new_test_master_node(maintli);
+    node.append_conf(
+        "postgresql.conf",
+        &format!("wal_acceptors='{}'\n", wal_acceptors),
+    );
+    node.start().unwrap();
+
+    // check basic work with table
+    node.safe_psql(
+        "postgres",
+        "CREATE TABLE t(key int primary key, value text)",
+    );
+    node.safe_psql(
+        "postgres",
+        "INSERT INTO t SELECT generate_series(1,100000), 'payload'",
+    );
+    let count: i64 = node
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    assert_eq!(count, 5000050000);
+    // check wal files equality
+}
+
+#[test]
+fn test_acceptors_normal_work() {
+    let local_env = local_env::test_env("test_acceptors_normal_work");
+
+    const REDUNDANCY: usize = 3;
+    let storage_cplane = TestStorageControlPlane::fault_tolerant(&local_env, REDUNDANCY);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+    let wal_acceptors = storage_cplane.get_wal_acceptor_conn_info();
+
+    // start postgres
+    let maintli = storage_cplane.get_branch_timeline("main");
+    let node = compute_cplane.new_test_master_node(maintli);
+    node.start().unwrap();
+
+    // start proxy
+    let _proxy = node.start_proxy(&wal_acceptors);
+
+    // check basic work with table
+    node.safe_psql(
+        "postgres",
+        "CREATE TABLE t(key int primary key, value text)",
+    );
+    node.safe_psql(
+        "postgres",
+        "INSERT INTO t SELECT generate_series(1,100000), 'payload'",
+    );
+    let count: i64 = node
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    assert_eq!(count, 5000050000);
+    // check wal files equality
+}
+
+// Run page server and multiple safekeepers, and multiple compute nodes running
+// against different timelines.
+#[test]
+fn test_many_timelines() {
+    // Initialize a new repository, and set up WAL safekeepers and page server.
+    const REDUNDANCY: usize = 3;
+    const N_TIMELINES: usize = 5;
+    let local_env = local_env::test_env("test_many_timelines");
+    let storage_cplane = TestStorageControlPlane::fault_tolerant(&local_env, REDUNDANCY);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+    let wal_acceptors = storage_cplane.get_wal_acceptor_conn_info();
+
+    // Create branches
+    let mut timelines: Vec<ZTimelineId> = Vec::new();
+    let maintli = storage_cplane.get_branch_timeline("main"); // main branch
+    timelines.push(maintli);
+    let startpoint = local_env::find_end_of_wal(&local_env, maintli).unwrap();
+    for i in 1..N_TIMELINES {
+        // additional branches
+        let branchname = format!("experimental{}", i);
+        local_env::create_branch(
+            &local_env,
+            &branchname,
+            PointInTime {
+                timelineid: maintli,
+                lsn: startpoint,
+            },
+        )
+        .unwrap();
+        let tli = storage_cplane.get_branch_timeline(&branchname);
+        timelines.push(tli);
+    }
+
+    // start postgres on each timeline
+    let mut nodes = Vec::new();
+    for tli in timelines {
+        let node = compute_cplane.new_test_node(tli);
+        nodes.push(node.clone());
+        node.start().unwrap();
+        node.start_proxy(&wal_acceptors);
+    }
+
+    // create schema
+    for node in &nodes {
+        node.safe_psql(
+            "postgres",
+            "CREATE TABLE t(key int primary key, value text)",
+        );
+    }
+
+    // Populate data
+    for node in &nodes {
+        node.safe_psql(
+            "postgres",
+            "INSERT INTO t SELECT generate_series(1,100000), 'payload'",
+        );
+    }
+
+    // Check data
+    for node in &nodes {
+        let count: i64 = node
+            .safe_psql("postgres", "SELECT sum(key) FROM t")
+            .first()
+            .unwrap()
+            .get(0);
+        println!("sum = {}", count);
+        assert_eq!(count, 5000050000);
+    }
+}
+
+// Majority is always alive
+#[test]
+fn test_acceptors_restarts() {
+    let local_env = local_env::test_env("test_acceptors_restarts");
+
+    // Start pageserver that reads WAL directly from that postgres
+    const REDUNDANCY: usize = 3;
+    const FAULT_PROBABILITY: f32 = 0.01;
+
+    let storage_cplane = TestStorageControlPlane::fault_tolerant(&local_env, REDUNDANCY);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+    let wal_acceptors = storage_cplane.get_wal_acceptor_conn_info();
+    let mut rng = rand::thread_rng();
+
+    // start postgres
+    let maintli = storage_cplane.get_branch_timeline("main");
+    let node = compute_cplane.new_test_master_node(maintli);
+    node.start().unwrap();
+
+    // start proxy
+    let _proxy = node.start_proxy(&wal_acceptors);
+    let mut failed_node: Option<usize> = None;
+
+    // check basic work with table
+    node.safe_psql(
+        "postgres",
+        "CREATE TABLE t(key int primary key, value text)",
+    );
+    let mut psql = node.open_psql("postgres");
+    for i in 1..=1000 {
+        psql.execute("INSERT INTO t values ($1, 'payload')", &[&i])
+            .unwrap();
+        let prob: f32 = rng.gen();
+        if prob <= FAULT_PROBABILITY {
+            if let Some(node) = failed_node {
+                storage_cplane.wal_acceptors[node].start();
+                failed_node = None;
+            } else {
+                let node: usize = rng.gen_range(0..REDUNDANCY);
+                failed_node = Some(node);
+                storage_cplane.wal_acceptors[node].stop().unwrap();
+            }
+        }
+    }
+    let count: i64 = node
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    assert_eq!(count, 500500);
+}
+
+fn start_acceptor(cplane: &Arc<TestStorageControlPlane>, no: usize) {
+    let cp = cplane.clone();
+    thread::spawn(move || {
+        thread::sleep(time::Duration::from_secs(DOWNTIME));
+        cp.wal_acceptors[no].start();
+    });
+}
+
+// Stop majority of acceptors while compute is under the load. Boot
+// them again and check that nothing was losed. Repeat.
+// N_CRASHES env var
+#[test]
+fn test_acceptors_unavailability() {
+    let local_env = local_env::test_env("test_acceptors_unavailability");
+
+    // Start pageserver that reads WAL directly from that postgres
+    const REDUNDANCY: usize = 2;
+
+    let storage_cplane = TestStorageControlPlane::fault_tolerant(&local_env, REDUNDANCY);
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+    let wal_acceptors = storage_cplane.get_wal_acceptor_conn_info();
+
+    // start postgres
+    let maintli = storage_cplane.get_branch_timeline("main");
+    let node = compute_cplane.new_test_master_node(maintli);
+    node.start().unwrap();
+
+    // start proxy
+    let _proxy = node.start_proxy(&wal_acceptors);
+
+    // check basic work with table
+    node.safe_psql(
+        "postgres",
+        "CREATE TABLE t(key int primary key, value text)",
+    );
+    let mut psql = node.open_psql("postgres");
+    psql.execute("INSERT INTO t values (1, 'payload')", &[])
+        .unwrap();
+
+    // Shut down all wal acceptors
+    storage_cplane.wal_acceptors[0].stop().unwrap();
+    let cp = Arc::new(storage_cplane);
+    start_acceptor(&cp, 0);
+    let now = SystemTime::now();
+    psql.execute("INSERT INTO t values (2, 'payload')", &[])
+        .unwrap();
+    // Here we check that the query above was hanging
+    // while wal_acceptor was unavailiable
+    assert!(now.elapsed().unwrap().as_secs() >= DOWNTIME);
+    psql.execute("INSERT INTO t values (3, 'payload')", &[])
+        .unwrap();
+
+    cp.wal_acceptors[1].stop().unwrap();
+    start_acceptor(&cp, 1);
+    psql.execute("INSERT INTO t values (4, 'payload')", &[])
+        .unwrap();
+    // Here we check that the query above was hanging
+    // while wal_acceptor was unavailiable
+    assert!(now.elapsed().unwrap().as_secs() >= 2 * DOWNTIME);
+
+    psql.execute("INSERT INTO t values (5, 'payload')", &[])
+        .unwrap();
+
+    let count: i64 = node
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    // Ensure that all inserts succeeded.
+    // Including ones that were waiting for wal acceptor restart.
+    assert_eq!(count, 15);
+}
+
+fn simulate_failures(cplane: Arc<TestStorageControlPlane>) {
+    let mut rng = rand::thread_rng();
+    let n_acceptors = cplane.wal_acceptors.len();
+    let failure_period = time::Duration::from_secs(1);
+    while cplane.is_running() {
+        thread::sleep(failure_period);
+        let mask: u32 = rng.gen_range(0..(1 << n_acceptors));
+        for i in 0..n_acceptors {
+            if (mask & (1 << i)) != 0 {
+                cplane.wal_acceptors[i].stop().unwrap();
+            }
+        }
+        thread::sleep(failure_period);
+        for i in 0..n_acceptors {
+            if (mask & (1 << i)) != 0 {
+                cplane.wal_acceptors[i].start();
+            }
+        }
+    }
+}
+
+// Race condition test
+#[test]
+fn test_race_conditions() {
+    let local_env = local_env::test_env("test_race_conditions");
+
+    // Start pageserver that reads WAL directly from that postgres
+    const REDUNDANCY: usize = 3;
+
+    let storage_cplane = Arc::new(TestStorageControlPlane::fault_tolerant(
+        &local_env, REDUNDANCY,
+    ));
+    let mut compute_cplane = ComputeControlPlane::local(&local_env, &storage_cplane.pageserver);
+    let wal_acceptors = storage_cplane.get_wal_acceptor_conn_info();
+
+    // start postgres
+    let maintli = storage_cplane.get_branch_timeline("main");
+    let node = compute_cplane.new_test_master_node(maintli);
+    node.start().unwrap();
+
+    // start proxy
+    let _proxy = node.start_proxy(&wal_acceptors);
+
+    // check basic work with table
+    node.safe_psql(
+        "postgres",
+        "CREATE TABLE t(key int primary key, value text)",
+    );
+
+    let cp = storage_cplane.clone();
+    let failures_thread = thread::spawn(move || {
+        simulate_failures(cp);
+    });
+
+    let mut psql = node.open_psql("postgres");
+    for i in 1..=1000 {
+        psql.execute("INSERT INTO t values ($1, 'payload')", &[&i])
+            .unwrap();
+    }
+    let count: i64 = node
+        .safe_psql("postgres", "SELECT sum(key) FROM t")
+        .first()
+        .unwrap()
+        .get(0);
+    println!("sum = {}", count);
+    assert_eq!(count, 500500);
+
+    storage_cplane.stop();
+    failures_thread.join().unwrap();
+}

mgmt-console/.gitignore

@@ -0,0 +1,23 @@
+# See https://help.github.com/articles/ignoring-files/ for more about ignoring files.
+
+# dependencies
+/node_modules
+/.pnp
+.pnp.js
+
+# testing
+/coverage
+
+# production
+/build
+
+# misc
+.DS_Store
+.env.local
+.env.development.local
+.env.test.local
+.env.production.local
+
+npm-debug.log*
+yarn-debug.log*
+yarn-error.log*

mgmt-console/README

@@ -0,0 +1,55 @@
+Mock implementation of a management console.
+
+See demo-howto.txt for usage.
+
+Building and Installation
+-------------------------
+
+To compile Postgres:
+  sudo apt build-dep postgresql
+  sudo apt install bison flex libz-dev libssl-dev
+  sudo apt install ccache
+  sudo apt install libcurl4-openssl-dev libxml2-dev
+
+For the webapp:
+  # NOTE: This requires at least version 1.1.0 of python3-flask. That's not
+  # available in Debian Buster, need at least Bullseye.
+
+  sudo apt install python3 python3-flask python3-pip npm webpack
+  pip3 install Flask-BasicAuth
+  pip3 install boto3
+
+git clone and compile and install patched version of Postgres:
+
+  git clone https://github.com/libzenith/postgres.git
+  cd postgres
+  git checkout zenith-experiments
+  ./configure --enable-debug --enable-cassert --with-openssl --prefix=/home/heikki/pgsql-install --with-libxml CC="ccache gcc" CFLAGS="-O0"
+  make -j4 -s install
+
+Get the webapp:
+  cd ~
+  git clone https://github.com/libzenith/zenith-mgmt-console.git
+  cd zenith-mgmt-console
+  mkdir pgdatadirs
+
+
+  openssl req -new -x509 -days 365 -nodes -text -out server.crt \
+    -keyout server.key -subj "/CN=zenith-demo"
+
+For Mock S3 server (unless you want to test against a real cloud service):
+  sudo apt install python3-tornado
+
+  cd ~/zenith-mgmt-console
+  git clone https://github.com/hlinnaka/ms3.git
+
+Compile & run it:
+  npm install
+  webpack # compile React app
+
+  BASIC_AUTH_PASSWORD=<password> ./launch-local.sh
+
+
+You can view the contents of the S3 bucket with browser:
+
+http://<server>/list_bucket

mgmt-console/app.py

@@ -0,0 +1,340 @@
+from flask import request
+from flask_basicauth import BasicAuth
+from flask import render_template
+from subprocess import PIPE, STDOUT, run, Popen
+import html
+import os
+import re
+import shutil
+import logging
+import time
+
+import boto3
+from boto3.session import Session
+from botocore.client import Config
+from botocore.handlers import set_list_objects_encoding_type_url
+
+from flask import Flask
+
+import waldump
+
+
+app = Flask(__name__)
+
+app.config['BASIC_AUTH_USERNAME'] = 'zenith'
+app.config['BASIC_AUTH_PASSWORD'] = os.getenv('BASIC_AUTH_PASSWORD')
+app.config['BASIC_AUTH_FORCE'] = True
+
+basic_auth = BasicAuth(app)
+
+# S3 configuration:
+
+ENDPOINT = os.getenv('S3_ENDPOINT', 'https://localhost:9000')
+ACCESS_KEY = os.getenv('S3_ACCESSKEY', 'minioadmin')
+SECRET = os.getenv('S3_SECRET', '')
+BUCKET = os.getenv('S3_BUCKET', 'foobucket')
+
+print("Using bucket at " + ENDPOINT);
+
+#boto3.set_stream_logger('botocore', logging.DEBUG)
+
+session = Session(aws_access_key_id=ACCESS_KEY,
+                  aws_secret_access_key=SECRET,
+                  region_name=os.getenv('S3_REGION', 'auto'))
+
+# needed for google cloud?
+session.events.unregister('before-parameter-build.s3.ListObjects',
+                          set_list_objects_encoding_type_url)
+
+s3resource = session.resource('s3',
+                              endpoint_url=ENDPOINT,
+                              verify=False,
+                              config=Config(signature_version='s3v4'))
+s3bucket = s3resource.Bucket(BUCKET)
+
+s3_client = boto3.client('s3',
+                         endpoint_url=ENDPOINT,
+                         verify=False,
+                         config=Config(signature_version='s3v4'),
+                         aws_access_key_id=ACCESS_KEY,
+                         aws_secret_access_key=SECRET)
+
+
+@app.route("/")
+def index():
+    return render_template("index.html")
+
+
+@app.route("/api/waldump")
+def render_waldump():
+    return render_template("waldump.html")
+
+@app.route('/api/fetch_wal')
+def fetch_wal():
+    return waldump.fetch_wal(request, s3bucket);
+
+@app.route("/api/server_status")
+def server_status():
+    dirs = os.listdir("pgdatadirs")
+    dirs.sort()
+
+    primary = None
+    standbys = []
+
+    for dirname in dirs:
+        
+        result = run("pg_ctl status -D pgdatadirs/" + dirname, stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=True)
+
+        srv = {
+            'datadir': dirname,
+            'status': result.stdout,
+            'port': None
+        }
+
+        if dirname == 'primary':
+            primary = srv;
+            primary['port'] = 5432;
+        else:
+            standby_match = re.search('standby_([0-9]+)', dirname)
+            if standby_match:
+                srv['port'] = int(standby_match.group(1))
+
+            standbys.append(srv);
+
+    return {'primary': primary, 'standbys': standbys}
+
+@app.route('/api/list_bucket')
+def list_bucket():
+
+    response = 'cloud bucket contents:<br>\n'
+
+    for file in s3bucket.objects.all():
+        response = response + html.escape(file.key) + '<br>\n'
+
+    return response
+
+def walpos_str(walpos):
+    return '{:X}/{:X}'.format(walpos >> 32, walpos & 0xFFFFFFFF)
+
+@app.route('/api/bucket_summary')
+def bucket_summary():
+
+    nonrelimages = []
+    minwal = int(0)
+    maxwal = int(0)
+    minseqwal = int(0)
+    maxseqwal = int(0)
+
+    for file in s3bucket.objects.all():
+        path = file.key
+        match = re.search('nonreldata/nonrel_([0-9A-F]+).tar', path)
+        if match:
+            walpos = int(match.group(1), 16)
+            nonrelimages.append(walpos_str(walpos))
+
+        match = re.search('nonreldata/nonrel_([0-9A-F]+)-([0-9A-F]+)', path)
+        if match:
+            endwal = int(match.group(2), 16)
+            if endwal > maxwal:
+                maxwal = endwal
+
+        match = re.search('walarchive/([0-9A-F]{8})([0-9A-F]{8})([0-9A-F]{8})', path)
+        if match:
+            tli = int(match.group(1), 16)
+            logno = int(match.group(2), 16)
+            segno = int(match.group(3), 16)
+            # FIXME: this assumes default 16 MB wal segment size
+            logsegno = logno * (0x100000000 / (16*1024*1024)) + segno
+
+            seqwal = int((logsegno + 1) * (16*1024*1024))
+
+            if seqwal > maxseqwal:
+                maxseqwal = seqwal;
+            if minseqwal == 0 or seqwal < minseqwal:
+                minseqwal = seqwal;
+
+    return {
+        'nonrelimages': nonrelimages,
+        'minwal': walpos_str(minwal),
+        'maxwal': walpos_str(maxwal),
+        'minseqwal': walpos_str(minseqwal),
+        'maxseqwal': walpos_str(maxseqwal)
+        }
+
+def print_cmd_result(cmd_result):
+    return print_cmd_result_ex(cmd_result.args, cmd_result.returncode, cmd_result.stdout)
+
+def print_cmd_result_ex(cmd, returncode, stdout):
+    res = ''
+    res += 'ran command:\n' + str(cmd) + '\n'
+    res += 'It returned code ' + str(returncode) + '\n'
+    res += '\n'
+    res += 'stdout/stderr:\n'
+    res += stdout
+
+    return res
+
+@app.route('/api/init_primary', methods=['GET', 'POST'])
+def init_primary():
+    
+    initdb_result = run("initdb -D pgdatadirs/primary --username=zenith --pwfile=pg-password.txt", stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=True)
+    if initdb_result.returncode != 0:
+        return print_cmd_result(initdb_result)
+    
+    # Append archive_mode and archive_command and port to postgresql.conf
+    f=open("pgdatadirs/primary/postgresql.conf", "a+")
+    f.write("listen_addresses='*'\n")
+    f.write("archive_mode=on\n")
+    f.write("archive_command='zenith_push --archive-wal-path=%p --archive-wal-fname=%f'\n")
+    f.write("ssl=on\n")
+    f.close()
+
+    f=open("pgdatadirs/primary/pg_hba.conf", "a+")
+    f.write("# allow SSL connections with password from anywhere\n")
+    f.write("hostssl    all             all             0.0.0.0/0           md5\n")
+    f.write("hostssl    all             all             ::0/0               md5\n")
+    f.close()
+
+    shutil.copyfile("server.crt", "pgdatadirs/primary/server.crt")
+    shutil.copyfile("server.key", "pgdatadirs/primary/server.key")
+    os.chmod("pgdatadirs/primary/server.key", 0o0600)
+    
+    start_proc = Popen(args=["pg_ctl", "start", "-D", "pgdatadirs/primary", "-l", "pgdatadirs/primary/log"], stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=False, start_new_session=True, close_fds=True)
+    start_rc = start_proc.wait()
+    start_stdout, start_stderr = start_proc.communicate()
+
+    responsestr = print_cmd_result(initdb_result) + '\n'
+    responsestr += print_cmd_result_ex(start_proc.args, start_rc, start_stdout)
+
+    return responsestr
+
+@app.route('/api/zenith_push', methods=['GET', 'POST'])
+def zenith_push():
+    # Stop the primary if it's running
+    stop_result = run(args=["pg_ctl", "stop", "-D", "pgdatadirs/primary"], stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=False, start_new_session=True, close_fds=True)
+    
+    # Call zenith_push
+    push_result = run("zenith_push -D pgdatadirs/primary", stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=True)
+
+    # Restart the primary
+    start_proc = Popen(args=["pg_ctl", "start", "-D", "pgdatadirs/primary", "-l", "pgdatadirs/primary/log"], stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=False, start_new_session=True, close_fds=True)
+    start_rc = start_proc.wait()
+    start_stdout, start_stderr = start_proc.communicate()
+    
+    responsestr = print_cmd_result(stop_result) + '\n'
+    responsestr += print_cmd_result(push_result) + '\n'
+    responsestr += print_cmd_result_ex(start_proc.args, start_rc, start_stdout) + '\n'
+
+    return responsestr
+
+@app.route('/api/create_standby', methods=['GET', 'POST'])
+def create_standby():
+
+    walpos = request.form.get('walpos')
+    if not walpos:
+        return 'no walpos'
+    
+    dirs = os.listdir("pgdatadirs")
+
+    last_port = 5432
+
+    for dirname in dirs:
+
+        standby_match = re.search('standby_([0-9]+)', dirname)
+        if standby_match:
+            port = int(standby_match.group(1))
+            if port > last_port:
+                last_port = port
+
+    standby_port = last_port + 1
+
+    standby_dir = "pgdatadirs/standby_" + str(standby_port)
+
+    # Call zenith_restore
+    restore_result = run(["zenith_restore", "--end=" + walpos, "-D", standby_dir], stdout=PIPE, stderr=STDOUT, encoding='latin1')
+    responsestr = print_cmd_result(restore_result)
+
+    if restore_result.returncode == 0:
+        # Append hot_standby and port to postgresql.conf
+        f=open(standby_dir + "/postgresql.conf", "a+")
+        f.write("hot_standby=on\n")
+        f.write("port=" + str(standby_port) + "\n")
+        f.close()
+
+        start_proc = Popen(args=["pg_ctl", "start", "-D", standby_dir, "-l", standby_dir + "/log"], stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=False, start_new_session=True, close_fds=True)
+        start_rc = start_proc.wait()
+        start_stdout, start_stderr = start_proc.communicate()
+        responsestr += '\n\n' + print_cmd_result_ex(start_proc.args, start_rc, start_stdout)
+
+    return responsestr
+
+@app.route('/api/destroy_server', methods=['GET', 'POST'])
+def destroy_primary():
+
+    datadir = request.form.get('datadir')
+
+    # Check that the datadir parameter doesn't contain anything funny.
+    if not re.match("^[A-Za-z0-9_-]+$", datadir):
+        raise Exception('invalid datadir: ' + datadir)
+    
+    # Stop the server if it's running
+    stop_result = run(args=["pg_ctl", "stop", "-m", "immediate", "-D", "pgdatadirs/" + datadir], stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=False, start_new_session=True, close_fds=True)
+
+    shutil.rmtree('pgdatadirs/' + datadir, ignore_errors=True)
+
+    responsestr = print_cmd_result(stop_result) + '\n'
+    responsestr += 'Deleted datadir ' + datadir + '.\n'
+
+    return responsestr
+
+@app.route('/api/restore_primary', methods=['GET', 'POST'])
+def restore_primary():
+
+    # Call zenith_restore
+    restore_result = run(["zenith_restore", "-D", "pgdatadirs/primary"], stdout=PIPE, stderr=STDOUT, encoding='latin1')
+    responsestr = print_cmd_result(restore_result)
+
+    # Append restore_command to postgresql.conf, so that it can find the last raw WAL segments
+    f=open("pgdatadirs/primary/postgresql.conf", "a+")
+    f.write("listen_addresses='*'\n")
+    f.write("restore_command='zenith_restore --archive-wal-path=%p --archive-wal-fname=%f'\n")
+    f.write("ssl=on\n")
+    f.close()
+    
+    if restore_result.returncode == 0:
+        start_proc = Popen(args=["pg_ctl", "start", "-D", "pgdatadirs/primary", "-l", "pgdatadirs/primary/log"], stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=False, start_new_session=True, close_fds=True)
+        start_rc = start_proc.wait()
+        start_stdout, start_stderr = start_proc.communicate()
+        responsestr += print_cmd_result_ex(start_proc.args, start_rc, start_stdout)
+
+    return responsestr
+
+@app.route('/api/slicedice', methods=['GET', 'POST'])
+def run_slicedice():
+    result = run("zenith_slicedice", stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=True)
+    
+    responsestr = print_cmd_result(result)
+
+    return responsestr
+
+@app.route('/api/reset_demo', methods=['POST'])
+def reset_all():
+    result = run("pkill -9 postgres", stdout=PIPE, stderr=STDOUT, universal_newlines=True, shell=True)
+
+    dirs = os.listdir("pgdatadirs")
+    for dirname in dirs:
+        shutil.rmtree('pgdatadirs/' + dirname)
+        
+    for file in s3bucket.objects.all():
+        s3_client.delete_object(Bucket = BUCKET, Key = file.key)
+
+    responsestr = print_cmd_result(result) + '\n'
+    responsestr += '''
+Deleted all Postgres datadirs.
+Deleted all files in object storage bucket.
+'''
+
+    return responsestr
+
+if __name__ == '__main__':
+    app.run()

mgmt-console/babel.config.js

@@ -0,0 +1,3 @@
+module.exports = {
+    presets: ["@babel/preset-env", "@babel/preset-react"],
+};

mgmt-console/demo-howto.txt

@@ -0,0 +1,67 @@
+Mock implementation of a management console.
+
+This isn't very different from a "normal" PostgreSQL installation with
+a base backup and WAL archive. The main user-visible difference is
+that when you create a standby server, we don't restore the whole data
+directory, but only the "non-relation" files. Relation files are
+restored on demand, when they're accessed the first time. That makes
+the "create standby" operation is very fast, but with some delay when
+you connect and start running queries instead.  Most visible if you
+have a large database. (However, see note below about large databases)
+
+Note: lots of things are broken/unsafe. Things will fail if a table is
+larger than 1 GB. Or if there are more than 1000 files in the cloud
+bucket.
+
+How to use this demo:
+
+1. If there are any leftovers from previous runs, reset by clicking
+   the RESET DEMO button.  This kills and deletes all Postgres servers,
+   and empties the cloud storage bucket
+
+2. Create primary server by clicking on the "Init primary" button
+
+3. Push a base image of the primary to cloud storage, by clicking the
+   "push base image" button.  (This takes about 30 seconds, be
+   patient)
+
+4. Connect to primary with psql, and create a test table with a little data.
+
+      psql postgres  -p5432 -U zenith -h<host>
+
+      create table mytable (i int4);
+
+      insert into mytable values (1);
+      select pg_switch_wal();
+
+   The Postgres password is the same as for the management console.
+
+3. Now that there's a new WAL segment in the arhive, we can "slice &
+   dice" it. Click on the "Slice & dice button".
+
+4. Perform more updates on the primary, to generate more WAL.
+
+      insert into mytable values (2); select pg_switch_wal();
+      insert into mytable values (3); select pg_switch_wal();
+      insert into mytable values (4); select pg_switch_wal();
+      insert into mytable values (5); select pg_switch_wal();
+
+5. Slice & Dice the WAL again
+
+6. Now you can create read-only standby servers at any point in the
+   WAL. Type a WAL position in the text box (or use the slider), and
+   click "Create new standby". The first standby is created at port 5433,
+   the second at port 5434, and so forth.
+
+7. Connect to the standby with "psql -p 5433". Note that it takes a
+   few seconds until the connection is established. That's because the
+   standby has to restore the basic system catalogs, like pg_database and
+   pg_authid from the backup. After connecting, you can do "\d" to list
+   tables, this will also take a few seconds, as more catalog tables are
+   restored from backup.  Subsequent commands will be faster.
+
+   Run queries in the standby:
+
+      select * from mytable;
+
+   the result depends on the LSN that you picked when you created the server.

mgmt-console/js/app.js

@@ -0,0 +1,463 @@
+import React, { useState, useEffect } from 'react';
+import ReactDOM from 'react-dom';
+import Loader from "react-loader-spinner";
+import { Router, Route, Link, IndexRoute, hashHistory, browserHistory } from 'react-router';
+
+function ServerStatus(props) {
+    const datadir = props.server.datadir;
+    const status = props.server.status;
+    const port = props.server.port;
+
+    return (
+	<div>
+	    <h2>{ datadir == 'primary' ? 'Primary' : datadir }</h2>
+	    status: <div className='status'>{status}</div><br/>
+	    to connect: <span className='shellcommand'>psql -h { window.location.hostname } -p { port } -U zenith postgres</span><br/>
+	</div>
+    );
+}
+
+function StandbyList(props) {
+    const bucketSummary = props.bucketSummary;
+    const standbys = props.standbys;
+    const maxwalpos = bucketSummary.maxwal ? walpos_to_int(bucketSummary.maxwal) : 0;
+
+    const [walposInput, setWalposInput] = useState({ src: 'text', value: '0/0'});
+
+    // find earliest base image
+    const minwalpos = bucketSummary.nonrelimages ? bucketSummary.nonrelimages.reduce((minpos, imgpos_str, index, array) => {
+	const imgpos = walpos_to_int(imgpos_str);
+	return (minpos == 0 || imgpos < minpos) ? imgpos : minpos;
+    }, 0) : 0;
+
+    const can_create_standby = minwalpos > 0 && maxwalpos > 0 && maxwalpos >= minwalpos;
+    var walpos_valid = true;
+
+    function create_standby() {
+	const formdata = new FormData();
+	formdata.append("walpos", walposStr);
+
+	props.startOperation('Creating new standby at ' + walposStr + '...',
+			     fetch("/api/create_standby", { method: 'POST', body: formdata }));
+    }
+
+    function destroy_standby(datadir) {
+	const formdata = new FormData();
+	formdata.append("datadir", datadir);
+	props.startOperation('Destroying ' + datadir + '...',
+			     fetch("/api/destroy_server", { method: 'POST', body: formdata }));
+    }
+
+    const handleSliderChange = (event) => {
+	setWalposInput({ src: 'slider', value: event.target.value });
+    }    
+
+    const handleWalposChange = (event) => {
+	setWalposInput({ src: 'text', value: event.target.value });
+    }
+
+    var sliderValue;
+    var walposStr;
+    if (walposInput.src == 'text')
+    {
+	const walpos = walpos_to_int(walposInput.value);
+
+	if (walpos >= minwalpos && walpos <= maxwalpos)
+	    walpos_valid = true;
+	else
+	    walpos_valid = false;
+	
+	sliderValue = Math.round((walpos - minwalpos) / (maxwalpos - minwalpos) * 100);
+	walposStr = walposInput.value;
+    }
+    else
+    {
+	const slider = walposInput.value;
+	const new_walpos = minwalpos + slider / 100 * (maxwalpos - minwalpos);
+
+	console.log('minwalpos: '+ minwalpos);
+	console.log('maxwalpos: '+ maxwalpos);
+
+	walposStr = int_to_walpos(Math.round(new_walpos));
+	walpos_valid = true;
+	console.log(walposStr);
+    }
+
+    var standbystatus = ''
+    if (standbys)
+    {
+	standbystatus = 
+	    <div>
+		{
+		    standbys.length > 0 ? 
+ 			standbys.map((server) =>
+			    <>
+				<ServerStatus key={ 'status_' + server.datadir} server={server}/>
+				<button key={ 'destroy_' + server.datadir} onClick={e => destroy_standby(server.datadir)}>Destroy standby</button>
+			    </>
+			) : "no standby servers"
+		}
+	    </div>
+    }
+
+    return (
+	<div>
+	    <h2>Standbys</h2>
+	    <button onClick={create_standby} disabled={!can_create_standby || !walpos_valid}>Create new Standby</button> at LSN 
+            <input type="text" id="walpos_input" value={ walposStr } onChange={handleWalposChange} disabled={!can_create_standby}/>
+	    <input type="range" id="walpos_slider" min="0" max="100" steps="1" value={sliderValue}  onChange={handleSliderChange} disabled={!can_create_standby}/>
+	    <br/>
+	    { standbystatus }
+	</div>
+    );
+}
+
+function ServerList(props) {
+    const primary = props.serverStatus ? props.serverStatus.primary : null;
+    const standbys = props.serverStatus ? props.serverStatus.standbys : [];
+    const bucketSummary = props.bucketSummary;
+
+    var primarystatus = '';
+
+    function destroy_primary() {
+	const formdata = new FormData();
+	formdata.append("datadir", 'primary');
+	props.startOperation('Destroying primary...',
+			     fetch("/api/destroy_server", { method: 'POST', body: formdata }));
+    }    
+
+    function restore_primary() {
+	props.startOperation('Restoring primary...',
+			     fetch("/api/restore_primary", { method: 'POST' }));
+    }    
+    
+    if (primary)
+    {
+	primarystatus =
+	    <div>
+		<ServerStatus server={primary}/>
+		<button onClick={destroy_primary}>Destroy primary</button>
+	    </div>
+    }
+    else
+    {
+	primarystatus =
+	    <div>
+		no primary server<br/>
+		<button onClick={restore_primary}>Restore primary</button>
+	    </div>
+    }
+
+    return (
+	<>
+	    { primarystatus }
+	    <StandbyList standbys={standbys} startOperation={props.startOperation} bucketSummary={props.bucketSummary}/>
+	    <p className="todo">
+		Should we list the WAL safekeeper nodes here? Or are they part of the Storage? Or not visible to users at all?
+	    </p>
+	</>
+    );
+}
+
+function BucketSummary(props) {
+    const bucketSummary = props.bucketSummary;
+    const startOperation = props.startOperation;
+
+    function slicedice() {
+	startOperation('Slicing sequential WAL to per-relation WAL...',
+		       fetch("/api/slicedice", { method: 'POST' }));
+    }
+    
+    if (!bucketSummary.nonrelimages)
+    {
+	return <>loading...</>
+    }
+
+    return (
+	<div>
+	    <div>Base images at following WAL positions:
+		<ul>
+		    {bucketSummary.nonrelimages.map((img) => (
+			<li key={img}>{img}</li>
+		    ))}
+		</ul>
+	    </div>
+            Sliced WAL is available up to { bucketSummary.maxwal }<br/>
+	    Raw WAL is available up to { bucketSummary.maxseqwal }<br/>
+
+	    <br/>
+	    <button onClick={slicedice}>Slice & Dice WAL</button>
+	    <p className="todo">
+		Currently, the slicing or "sharding" of the WAL needs to be triggered manually, by clicking the above button.
+		<br/>
+		TODO: make it a continuous process that runs in the WAL safekeepers, or in the Page Servers, or as a standalone service.
+	    </p>
+	</div>
+    );
+}
+
+function ProgressIndicator()
+{
+    return (
+	<div>
+	    <Loader
+		type="Puff"
+		color="#00BFFF"
+		height={100}
+		width={100}
+	    />
+	</div>
+    )
+}
+
+function walpos_to_int(walpos)
+{
+    const [hi, lo] = walpos.split('/');
+
+    return parseInt(hi, 16) + parseInt(lo, 16);
+}
+
+function int_to_walpos(x)
+{
+    console.log('converting ' + x);
+    return (Math.floor((x / 0x100000000)).toString(16) + '/' + (x % 0x100000000).toString(16)).toUpperCase();
+}
+
+function OperationStatus(props) {
+    const lastOperation = props.lastOperation;
+    const inProgress = props.inProgress;
+    const operationResult = props.operationResult;
+
+    if (lastOperation)
+    {
+	return (
+	    <div><h2>Last operation:</h2>
+		<div>{lastOperation} { (!inProgress && lastOperation) ? 'done!' : '' }</div>
+		<div className='result'>
+		    {inProgress ? <ProgressIndicator/> : <pre>{operationResult}</pre>}
+		</div>
+	    </div>
+	);
+    }
+    else
+	return '';
+}
+
+function ActionButtons(props) {
+
+    const startOperation = props.startOperation;
+    const bucketSummary = props.bucketSummary;
+    
+    function reset_demo() {
+	startOperation('resetting everything...',
+		       fetch("/api/reset_demo", { method: 'POST' }));
+    }
+
+    function init_primary() {
+	startOperation('Initializing new primary...',
+		       fetch("/api/init_primary", { method: 'POST' }));
+    }
+
+    function zenith_push() {
+	startOperation('Pushing new base image...',
+		       fetch("/api/zenith_push", { method: 'POST' }));
+    }
+	
+    return (
+	<div>
+	    <p className="todo">
+		RESET DEMO deletes everything in the storage bucket, and stops and destroys all servers. This resets the whole demo environment to the initial state.
+	    </p>
+	    <button onClick={reset_demo}>RESET DEMO</button>
+	    <p className="todo">
+		Init Primary runs initdb to create a new primary server. Click this after Resetting the demo.
+	    </p>
+
+	    <button onClick={init_primary}>Init primary</button>
+
+	    <p className="todo">
+		Push Base Image stops the primary, copies the current state of the primary to the storage bucket as a new base backup, and restarts the primary.
+		<br/>
+		TODO: This should be handled by a continuous background process, probably running in the storage nodes. And without having to shut down the cluster, of course.
+	    </p>
+
+	    <button onClick={zenith_push}>Push base image</button>
+
+	</div>
+    );
+}
+
+function Sidenav(props)
+{
+    const toPage = (page) => (event) => {
+	//event.preventDefault()
+	props.switchPage(page);
+    };
+    return (
+	<div>
+	    <h3 className="sidenav-item">Menu</h3>
+	    <a href="#servers" onClick={toPage('servers')} className="sidenav-item">Servers</a>
+	    <a href="#storage" onClick={toPage('storage')} className="sidenav-item">Storage</a>
+	    <a href="#snapshots" onClick={toPage('snapshots')} className="sidenav-item">Snapshots</a>
+	    <a href="#demo" onClick={toPage('demo')} className="sidenav-item">Demo</a>
+	    <a href="#import" onClick={toPage('import')}  className="sidenav-item">Import / Export</a>
+	    <a href="#jobs" onClick={toPage('jobs')} className="sidenav-item">Jobs</a>
+	</div>
+    );
+}
+
+function App()
+{
+    const [page, setPage] = useState('servers');
+    const [serverStatus, setServerStatus] = useState({});
+    const [bucketSummary, setBucketSummary] = useState({});
+    const [lastOperation, setLastOperation] = useState('');
+    const [inProgress, setInProgress] = useState('');
+    const [operationResult, setOperationResult] = useState('');
+
+    useEffect(() => {
+	reloadStatus();
+    }, []);
+
+    function startOperation(operation, promise)
+    {
+	promise.then(result => result.text()).then(resultText => {
+	    operationFinished(resultText);
+	});
+	
+	setLastOperation(operation);
+	setInProgress(true);
+	setOperationResult('');
+    }
+
+    function operationFinished(result)
+    {
+	setInProgress(false);
+	setOperationResult(result);
+	reloadStatus();
+    }
+
+    function clearOperation()
+    {
+	setLastOperation('')
+	setInProgress('');
+	setOperationResult('');
+	console.log("cleared");
+    }
+    
+    function reloadStatus()
+    {
+	fetch('/api/server_status').then(res => res.json()).then(data => {
+	    setServerStatus(data);
+	});
+
+	fetch('/api/bucket_summary').then(res => res.json()).then(data => {
+	    setBucketSummary(data);
+	});
+    }
+
+    const content = () => {
+	console.log(page);
+	if (page === 'servers') {
+	    return (
+		<>
+		    <h1>Server status</h1>
+		    <ServerList startOperation={ startOperation }
+				serverStatus={ serverStatus }
+				bucketSummary={ bucketSummary }/>
+		</>
+	    );
+	} else if (page === 'storage') {
+	    return (
+		<>
+		    <h1>Storage bucket status</h1>
+		    <BucketSummary startOperation={ startOperation }
+				   bucketSummary={ bucketSummary }/>
+		</>
+	    );
+	} else if (page === 'snapshots') {
+	    return (
+		<>
+		    <h1>Snapshots</h1>
+		    <p className="todo">
+			In Zenith, snapshots are just specific points (LSNs) in the WAL history, with a label. A snapshot prevents garbage collecting old data that's still needed to reconstruct the database at that LSN.
+		    </p>
+		    <p className="todo">
+			TODO:
+			<ul>
+			    <li>List existing snapshots</li>
+			    <li>Create new snapshot manually, from current state or from a given LSN</li>
+			    <li>Drill into the WAL stream to see what have happened. Provide tools for e.g. finding point where a table was dropped</li>
+			    <li>Create snapshots automatically based on events in the WAL, like if you call pg_create_restore_point(() in the primary</li>
+			    <li>Launch new reader instance at a snapshot</li>
+			    <li>Export snapshot</li>
+			    <li>Rollback cluster to a snapshot</li>
+			</ul>
+		    </p>
+		</>
+	    );
+	} else if (page === 'demo') {
+	    return (
+		<>
+		    <h1>Misc actions</h1>
+		    <ActionButtons startOperation={ startOperation }
+				   bucketSummary={ bucketSummary }/>
+		</>
+	    );
+	} else if (page === 'import') {
+	    return (
+		<>
+		    <h1>Import & Export tools</h1>
+		    <p className="TODO">TODO:
+			<ul>
+			    <li>Initialize database from existing backup (pg_basebackup, WAL-G, pgbackrest)</li>
+			    <li>Initialize from a pg_dump or other SQL script</li>
+			    <li>Launch batch job to import data files from S3</li>
+			    <li>Launch batch job to export database with pg_dump to S3</li>
+			</ul>
+			These jobs can be run in against reader processing nodes. We can even
+			spawn a new reader node dedicated to a job, and destry it when the job is done.
+		    </p>
+		</>
+	    );
+	} else if (page === 'jobs') {
+	    return (
+		<>
+		    <h1>Batch jobs</h1>
+		    <p className="TODO">TODO:
+			<ul>
+			    <li>List running jobs launched from Import & Export tools</li>
+			    <li>List other batch jobs launched by the user</li>
+			    <li>Launch new batch jobs</li>
+			</ul>
+		    </p>
+		</>
+	    );
+	}
+    }
+
+    function switchPage(page)
+    {
+	console.log("topage " + page);
+	setPage(page)
+	clearOperation();
+    };
+
+    return (
+	<div className="row">
+	    <div className="sidenav">
+		<Sidenav switchPage={switchPage} className="column"/>
+	    </div>
+	    <div className="column">
+		<div>
+		    { content() }
+		</div>
+		<OperationStatus lastOperation={ lastOperation }
+				 inProgress = { inProgress }
+				 operationResult = { operationResult }/>
+	    </div>
+	</div>
+    );
+}
+
+ReactDOM.render(<App/>, document.getElementById('reactApp'));

mgmt-console/js/waldump.js

@@ -0,0 +1,105 @@
+import React, { useState, useEffect } from 'react';
+import ReactDOM from 'react-dom';
+import Loader from "react-loader-spinner";
+
+function walpos_to_int(walpos)
+{
+    const [hi, lo] = walpos.split('/');
+
+    return parseInt(hi, 16) + parseInt(lo, 16);
+}
+
+const palette = [
+    "#003f5c",
+    "#2f4b7c",
+    "#665191",
+    "#a05195",
+    "#d45087",
+    "#f95d6a",
+    "#ff7c43",
+    "#ffa600"];
+
+function WalRecord(props)
+{
+    const firstwalpos = props.firstwalpos;
+    const endwalpos = props.endwalpos;
+    const record = props.record;
+    const index = props.index;
+    const xidmap = props.xidmap;
+
+    const startpos = walpos_to_int(record.start)
+    const endpos = walpos_to_int(record.end)
+
+    const scale = 1000 / (16*1024*1024)
+    const startx = (startpos - firstwalpos) * scale;
+    const endx = (endpos - firstwalpos) * scale;
+
+    const xidindex = xidmap[record.xid];
+    const color = palette[index % palette.length];
+
+    const y = 5 + (xidindex) * 20 + (index % 2) * 2;
+    
+    return (
+	<line x1={ startx } y1={y} x2={endx} y2={y} stroke={ color } strokeWidth="5">
+	    <title>
+		start: { record.start } end: { record.end }
+	    </title>
+	</line>
+    )
+}
+
+function WalFile(props)
+{
+    const walContent = props.walContent;
+    const firstwalpos = props.firstwalpos;
+    const xidmap = props.xidmap;
+   
+    return <svg width="1000" height="200">
+	       {
+		   walContent.records ? 
+ 		       walContent.records.map((record, index) =>
+			   <WalRecord key={record.start} firstwalpos={firstwalpos} record={record} index={index} xidmap={xidmap}/>
+		       ) : "no records"
+	       }
+	   </svg>
+}
+
+function WalDumpApp()
+{
+    const [walContent, setWalContent] = useState({});
+
+    const filename = '00000001000000000000000C';
+
+    useEffect(() => {
+	fetch('/fetch_wal?filename='+filename).then(res => res.json()).then(data => {
+	    setWalContent(data);
+	});
+    }, []);
+
+    var firstwalpos = 0;
+    var endwalpos = 0;
+    var numxids = 0;
+    var xidmap = {};
+    if (walContent.records && walContent.records.length > 0)
+    {
+	firstwalpos = walpos_to_int(walContent.records[0].start);
+	endwalpos = firstwalpos + 16*1024*1024;
+
+	walContent.records.forEach(rec => {
+	    if (!xidmap[rec.xid])
+	    {
+		xidmap[rec.xid] = ++numxids;
+	    }
+	});
+    }
+
+    return (
+	<>
+	    <h2>{filename}</h2>
+	    <WalFile walContent={walContent} firstwalpos={firstwalpos} endwalpos={endwalpos} xidmap={xidmap}/>
+	</>
+    );
+}
+
+console.log('hey there');
+ReactDOM.render(<WalDumpApp/>, document.getElementById('waldump'));

mgmt-console/launch-google-cloud.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+#
+# NOTE: You must set the following environment variables before running this:
+#  BASIC_AUTH_PASSWORD - basic http auth password
+#  S3_ACCESSKEY
+#  S3_SECRET
+
+
+S3_ENDPOINT=https://storage.googleapis.com S3_BUCKET=zenith-testbucket PATH=/home/heikki/pgsql-install/bin:$PATH flask run --host=0.0.0.0

mgmt-console/launch-local.sh

@@ -0,0 +1,8 @@
+#!/bin/bash
+#
+# NOTE: You should set the BASIC_AUTH_PASSWORD environment variable before calling
+
+# Launch S3 server
+(cd ms3 && python3 -m ms3.app --listen-address=localhost) &
+
+FLASK_ENV=development S3_REGION=auto S3_ENDPOINT=http://localhost:9009 S3_BUCKET=zenith-testbucket PATH=/home/heikki/pgsql.fsmfork/bin:$PATH flask run --host=0.0.0.0

mgmt-console/package.json

@@ -0,0 +1,27 @@
+{
+  "name": "starter-kit",
+  "version": "1.1.0",
+  "description": "",
+  "main": "index.js",
+  "scripts": {
+    "test": "echo \"Error: no test specified\" && exit 1",
+    "build": "webpack",
+    "start": "python app.py"
+  },
+  "author": "",
+  "license": "ISC",
+  "dependencies": {
+    "react": "^17.0.1",
+    "react-dom": "^17.0.1",
+    "react-loader-spinner": "^4.0.0",
+    "react-router": "^5.2.0"
+  },
+  "devDependencies": {
+    "@babel/core": "^7.13.1",
+    "@babel/preset-env": "^7.13.5",
+    "@babel/preset-react": "^7.12.13",
+    "babel-loader": "^8.2.2",
+    "webpack": "^5.24.2",
+    "webpack-cli": "^4.5.0"
+  }
+}

mgmt-console/templates/index.html

@@ -0,0 +1,58 @@
+<head>
+
+<style>
+  .status {
+      font-family: monospace;
+      background-color: lightgrey;
+  }
+  .shellcommand {
+      font-family: monospace;
+      background-color: lightgrey;
+  }
+  .result {
+      font-family: monospace;
+      background-color: lightgrey;
+      padding: 10px;
+  }
+
+
+  .todo   {font-style: italic;}
+
+
+  h1   {color: blue;}
+
+  .column {
+      float: left;
+      width: 50%;
+      padding: 10px;
+  }
+  /* Clear floats after the columns */
+  .row:after {
+      content: "";
+      display: table;
+      clear: both;
+  }
+
+  .sidenav {
+      float: left;
+      width: 150px;
+      padding: 10px;
+      background-color: pink;
+  }
+
+  .sidenav-item {
+      padding:10px 0px;
+      border:none;
+      display:block;
+  }
+
+</style>
+
+</head>
+
+<body>
+  <div id="reactApp"></div>
+
+  <!-- Attach React components -->
+  <script type="text/javascript" src="{{ url_for('static', filename='app_bundle.js') }}"></script>
+</body>

mgmt-console/templates/waldump.html

@@ -0,0 +1,46 @@
+<head>
+
+<style>
+  .status {
+      font-family: monospace;
+      background-color: lightgrey;
+  }
+  .shellcommand {
+      font-family: monospace;
+      background-color: lightgrey;
+  }
+  .result {
+      font-family: monospace;
+      background-color: lightgrey;
+      padding: 10px;
+  }
+h1   {color: blue;}
+p    {color: red;}
+
+* {
+  box-sizing: border-box;
+}
+
+.row {
+  display: flex;
+}
+
+/* Create two equal columns that sits next to each other */
+.column1 {
+  flex: 30%;
+  padding: 10px;
+}
+.column2 {
+  flex: 70%;
+  padding: 10px;
+}
+</style>
+
+</head>
+
+<body>
+  <div id="waldump"></div>
+
+  <!-- Attach React components -->
+  <script type="text/javascript" src="{{ url_for('static', filename='waldump_bundle.js') }}"></script>
+</body>

mgmt-console/waldump.py

@@ -0,0 +1,25 @@
+#
+# This file contains work-in-progress code to visualize WAL contents.
+#
+# This is the API endpoint that calls a 'zenith_wal_to_json' executable,
+# which is a hacked version of pg_waldump that prints information about the
+# records in JSON format. The code in js/waldump.js displays it.
+#
+
+import os
+import re
+from subprocess import PIPE, STDOUT, run, Popen
+
+def fetch_wal(request, s3bucket):
+    filename = request.args.get('filename')
+    if not re.match("^[A-Za-z0-9_]+$", filename):
+        raise Exception('invalid WAL filename: ' + filename)
+
+    # FIXME: this downloads the WAL file to current dir. Use a temp dir? Pipe?
+    s3bucket.download_file('walarchive/' + filename, filename)
+
+    result = run("zenith_wal_to_json " + filename, stdout=PIPE, universal_newlines=True, shell=True)
+
+    os.unlink(filename);
+
+    return result.stdout

mgmt-console/webpack.config.js

@@ -0,0 +1,27 @@
+var webpack = require('webpack');  
+module.exports = {  
+    entry: {
+	app: './js/app.js',
+	waldump: './js/waldump.js'
+    },
+    output: {
+	filename: "[name]_bundle.js",
+	path: __dirname + '/static'
+    },
+    module: {
+	rules: [
+	    {
+		test: /\.js?$/,
+		exclude: /node_modules/,
+		use: {
+		    loader: 'babel-loader',
+		    options: {
+			presets: ['@babel/preset-env']
+		    }
+		}
+	    }
+	]
+    },
+    plugins: [
+    ]
+};

mgmt-console/zenith.py

@@ -0,0 +1,179 @@
+#zenith.py
+import click
+import testgres
+import os
+
+from testgres import PostgresNode
+from tabulate import tabulate
+
+zenith_base_dir = '/home/anastasia/zenith/basedir'
+
+@click.group()
+def main():
+    """Run the Zenith CLI."""
+
+@click.group()
+def pg():
+    """Db operations
+
+        NOTE: 'database' here means one postgresql node
+    """
+
+@click.command(name='create')
+@click.option('--name', required=True)
+@click.option('-s', '--storage-name', help='Name of the storage',
+                                 default='zenith-local',
+                                 show_default=True)
+@click.option('--snapshot', help='init from the snapshot. Snap is a name or URL')
+@click.option('--no-start', is_flag=True, help='Do not start created node',
+                            default=False, show_default=True)
+def pg_create(name, storage_name, snapshot, no_start):
+    """Initialize the database"""
+    node = PostgresNode()
+    base_dir = os.path.join(zenith_base_dir, 'pg', name)
+    node = testgres.get_new_node(name, base_dir=base_dir)
+    # TODO skip init, instead of that link node with storage or upload it from snapshot
+    node.init()
+    if(no_start==False):
+        node.start()
+
+@click.command(name='start')
+@click.option('--name', required=True)
+@click.option('--snapshot')
+@click.option('--read-only', is_flag=True, help='Start read-only node', show_default=True)
+def pg_start(name, snapshot, read_only):
+    """Start the database"""
+    node = PostgresNode()
+    base_dir = os.path.join(zenith_base_dir, 'pg', name)
+    node = testgres.get_new_node(name, base_dir=base_dir)
+    # TODO pass snapshot as a parameter
+    node.start()
+
+@click.command(name='stop')
+@click.option('--name', required=True)
+def pg_stop(name):
+    """Stop the database"""
+    node = PostgresNode()
+    base_dir = os.path.join(zenith_base_dir, 'pg', name)
+    node = testgres.get_new_node(name, base_dir=base_dir)
+    node.stop()
+
+@click.command(name='destroy')
+@click.option('--name', required=True)
+def pg_destroy(name):
+    """Drop the database"""
+    node = PostgresNode()
+    base_dir = os.path.join(zenith_base_dir, 'pg', name)
+    node = testgres.get_new_node(name, base_dir=base_dir)
+    node.cleanup()
+
+@click.command(name='list')
+def pg_list():
+    """List existing databases"""
+    dirs = os.listdir(os.path.join(zenith_base_dir, 'pg'))
+    path={}
+    status={}
+    data=[]
+
+    for dirname in dirs:
+        path[dirname] = os.path.join(zenith_base_dir, 'pg', dirname)
+        fname = os.path.join( path[dirname], 'data/postmaster.pid')
+        try:
+            f = open(fname,'r')
+            status[dirname] = f.readlines()[-1]
+        except OSError as err:
+            status[dirname]='inactive'
+        data.append([dirname , status[dirname], path[dirname]])
+
+    print(tabulate(data, headers=['Name', 'Status', 'Path']))
+
+pg.add_command(pg_create)
+pg.add_command(pg_destroy)
+pg.add_command(pg_start)   
+pg.add_command(pg_stop)   
+pg.add_command(pg_list)
+
+
+
+@click.group()
+def storage():
+    """Storage operations"""
+
+@click.command(name='attach')
+@click.option('--name')
+def storage_attach(name):
+    """Attach the storage"""
+
+@click.command(name='detach')
+@click.option('--name')
+@click.option('--force', is_flag=True, show_default=True)
+def storage_detach(name):
+    """Detach the storage"""
+
+@click.command(name='list')
+def storage_list():
+    """List existing storages"""
+
+storage.add_command(storage_attach)
+storage.add_command(storage_detach)
+storage.add_command(storage_list)
+
+@click.group()
+def snapshot():
+    """Snapshot operations"""
+
+@click.command(name='create')
+def snapshot_create():
+    """Create new snapshot"""
+
+@click.command(name='destroy')
+def snapshot_destroy():
+    """Destroy the snapshot"""
+
+@click.command(name='pull')
+def snapshot_pull():
+    """Pull remote snapshot"""
+
+@click.command(name='push')
+def snapshot_push():
+    """Push snapshot to remote"""
+
+@click.command(name='import')
+def snapshot_import():
+    """Convert given format to zenith snapshot"""
+
+@click.command(name='export')
+def snapshot_export():
+    """Convert zenith snapshot to PostgreSQL compatible format"""
+
+snapshot.add_command(snapshot_create)
+snapshot.add_command(snapshot_destroy)
+snapshot.add_command(snapshot_pull)
+snapshot.add_command(snapshot_push)
+snapshot.add_command(snapshot_import)
+snapshot.add_command(snapshot_export)
+
+@click.group()
+def wal():
+    """WAL operations"""
+
+@click.command()
+def wallist(name="list"):
+    """List WAL files"""
+
+wal.add_command(wallist)
+
+
+@click.command()
+def console():
+    """Open web console"""
+
+main.add_command(pg)
+main.add_command(storage)
+main.add_command(snapshot)
+main.add_command(wal)
+main.add_command(console)
+
+
+if __name__ == '__main__':
+    main()

monitoring/docker-compose.yml

@@ -1,25 +0,0 @@
-version: "3"
-services:
-
-  prometheus:
-    container_name: prometheus
-    image: prom/prometheus:latest
-    volumes:
-      - ./prometheus.yaml:/etc/prometheus/prometheus.yml
-    # ports:
-    #   - "9090:9090"
-    # TODO: find a proper portable solution
-    network_mode: "host"
-
-  grafana:
-    image: grafana/grafana:latest
-    volumes:
-      - ./grafana.yaml:/etc/grafana/provisioning/datasources/datasources.yaml
-    environment:
-      - GF_AUTH_ANONYMOUS_ENABLED=true
-      - GF_AUTH_ANONYMOUS_ORG_ROLE=Admin
-      - GF_AUTH_DISABLE_LOGIN_FORM=true
-    # ports:
-    #   - "3000:3000"
-    # TODO: find a proper portable solution
-    network_mode: "host"

monitoring/grafana.yaml

@@ -1,12 +0,0 @@
-apiVersion: 1
-
-datasources:
-- name: Prometheus
-  type: prometheus
-  access: proxy
-  orgId: 1
-  url: http://localhost:9090
-  basicAuth: false
-  isDefault: false
-  version: 1
-  editable: false

monitoring/prometheus.yaml

@@ -1,5 +0,0 @@
-scrape_configs:
-  - job_name: 'default'
-    scrape_interval: 10s
-    static_configs:
-      - targets: ['localhost:9898']

pageserver/Cargo.toml

@@ -4,49 +4,41 @@ version = "0.1.0"
 authors = ["Stas Kelvich <stas@zenith.tech>"]
 edition = "2018"
 
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
 [dependencies]
-bookfile = { git = "https://github.com/zenithdb/bookfile.git", branch="generic-readext" }
 chrono = "0.4.19"
 rand = "0.8.3"
 regex = "1.4.5"
-bytes = { version = "1.0.1", features = ['serde'] }
+bytes = "1.0.1"
 byteorder = "1.4.3"
 futures = "0.3.13"
-hyper = "0.14"
 lazy_static = "1.4.0"
+slog-stdlog = "4.1.0"
+slog-async = "2.6.0"
+slog-scope = "4.4.0"
+slog-term = "2.8.0"
+slog = "2.7.0"
 log = "0.4.14"
 clap = "2.33.0"
+termion = "1.5.6"
+tui = "0.14.0"
 daemonize = "0.4.1"
-tokio = { version = "1.11", features = ["process", "sync", "macros", "fs", "rt", "io-util", "time"] }
-postgres-types = { git = "https://github.com/zenithdb/rust-postgres.git", rev="9eb0dbfbeb6a6c1b79099b9f7ae4a8c021877858" }
-postgres-protocol = { git = "https://github.com/zenithdb/rust-postgres.git", rev="9eb0dbfbeb6a6c1b79099b9f7ae4a8c021877858" }
-postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="9eb0dbfbeb6a6c1b79099b9f7ae4a8c021877858" }
-routerify = "2"
+rust-s3 = { git = "https://github.com/hlinnaka/rust-s3", rev="7f15a24ec7daa0a5d9516da706212745f9042818", features = ["no-verify-ssl"] }
+tokio = { version = "1.3.0", features = ["full"] }
+tokio-stream = { version = "0.1.4" }
+tokio-postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+postgres-types = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+postgres-protocol = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+rocksdb = "0.16.0"
 anyhow = "1.0"
 crc32c = "0.6.0"
+walkdir = "2"
 thiserror = "1.0"
-hex = { version = "0.4.3", features = ["serde"] }
+hex = "0.4.3"
 tar = "0.4.33"
-humantime = "2.1.0"
-serde = { version = "1.0", features = ["derive"] }
-serde_json = "1"
-toml = "0.5"
-scopeguard = "1.1.0"
-async-trait = "0.1"
-const_format = "0.2.21"
-tracing = "0.1.27"
-signal-hook = "0.3.10"
-url = "2"
-nix = "0.23"
-once_cell = "1.8.0"
-
-rust-s3 = { version = "0.27.0-rc4", features = ["no-verify-ssl"] }
+parse_duration = "*"
 
 postgres_ffi = { path = "../postgres_ffi" }
-zenith_metrics = { path = "../zenith_metrics" }
 zenith_utils = { path = "../zenith_utils" }
-workspace_hack = { path = "../workspace_hack" }
-
-[dev-dependencies]
-hex-literal = "0.3"
-tempfile = "3.2"

pageserver/README

@@ -0,0 +1,179 @@
+Page Server
+===========
+
+
+How to test
+-----------
+
+
+1. Compile and install Postgres from this repository (there are
+   modifications, so vanilla Postgres won't do)
+
+    ./configure --prefix=/home/heikki/zenith-install
+
+2. Compile the page server
+
+    cd pageserver
+    cargo build
+
+3. Create another "dummy" cluster that will be used by the page server when it applies
+   the WAL records. (shouldn't really need this, getting rid of it is a TODO):
+
+    /home/heikki/zenith-install/bin/initdb -D /data/zenith-dummy
+
+
+4. Initialize and start a new postgres cluster
+
+    /home/heikki/zenith-install/bin/initdb -D /data/zenith-test-db --username=postgres
+    /home/heikki/zenith-install/bin/postgres -D /data/zenith-test-db
+
+5. In another terminal, start the page server.
+
+    PGDATA=/data/zenith-dummy PATH=/home/heikki/zenith-install/bin:$PATH ./target/debug/pageserver
+
+   It should connect to the postgres instance using streaming replication, and print something
+   like this:
+
+    $ PGDATA=/data/zenith-dummy PATH=/home/heikki/zenith-install/bin:$PATH ./target/debug/pageserver
+    Starting WAL receiver
+    connecting...
+    Starting page server on 127.0.0.1:5430
+    connected!
+    page cache is empty
+
+6. You can now open another terminal and issue DDL commands. Generated WAL records will
+   be streamed to the page servers, and attached to blocks that they apply to in its
+   page cache
+
+    $ psql postgres -U postgres
+    psql (14devel)
+    Type "help" for help.
+    
+    postgres=# create table mydata (i int4);
+    CREATE TABLE
+    postgres=# insert into mydata select g from generate_series(1,100) g;
+    INSERT 0 100
+    postgres=# 
+
+7. The GetPage@LSN interface to the compute nodes isn't working yet, but to simulate
+   that, the page server generates a test GetPage@LSN call every 5 seconds on a random
+   block that's in the page cache. In a few seconds, you should see output from that:
+
+    testing GetPage@LSN for block 0
+    WAL record at LSN 23584576 initializes the page
+    2021-03-19 11:03:13.791 EET [11439] LOG:  applied WAL record at 0/167DF40
+    2021-03-19 11:03:13.791 EET [11439] LOG:  applied WAL record at 0/167DF80
+    2021-03-19 11:03:13.791 EET [11439] LOG:  applied WAL record at 0/167DFC0
+    2021-03-19 11:03:13.791 EET [11439] LOG:  applied WAL record at 0/167E018
+    2021-03-19 11:03:13.791 EET [11439] LOG:  applied WAL record at 0/167E058
+    2021-03-19 11:03:13.791 EET [11439] LOG:  applied WAL record at 0/167E098
+    2021-03-19 11:03:13.791 EET [11439] LOG:  applied WAL record at 0/167E0D8
+    2021-03-19 11:03:13.792 EET [11439] LOG:  applied WAL record at 0/167E118
+    2021-03-19 11:03:13.792 EET [11439] LOG:  applied WAL record at 0/167E158
+    2021-03-19 11:03:13.792 EET [11439] LOG:  applied WAL record at 0/167E198
+    applied 10 WAL records to produce page image at LSN 18446744073709547246
+
+
+
+Architecture
+============
+
+The Page Server is responsible for all operations on a number of
+"chunks" of relation data. A chunk corresponds to a PostgreSQL
+relation segment (i.e. one max. 1 GB file in the data directory), but
+it holds all the different versions of every page in the segment that
+are still needed by the system.
+
+Determining which chunk each Page Server holds is handled elsewhere. (TODO:
+currently, there is only one Page Server which holds all chunks)
+
+The Page Server has a few different duties:
+
+- Respond to GetPage@LSN requests from the Compute Nodes
+- Receive WAL from WAL safekeeper
+- Replay WAL that's applicable to the chunks that the Page Server maintains
+- Backup to S3
+
+
+The Page Server consists of multiple threads that operate on a shared
+cache of page versions:
+
+
+                                           | WAL
+                                           V
+                                   +--------------+
+                                   |              |
+                                   | WAL receiver |
+                                   |              |
+                                   +--------------+
+                                                                                 +----+
+                  +---------+                              ..........            |    |
+                  |         |                              .        .            |    |
+ GetPage@LSN      |         |                              . backup .  ------->  | S3 |
+------------->    |  Page   |         page cache           .        .            |    |
+                  | Service |                              ..........            |    |
+   page           |         |                                                    +----+
+<-------------    |         |
+                  +---------+
+
+                             ...................................
+                             .                                 .
+                             . Garbage Collection / Compaction .
+                             ...................................
+
+Legend:
+
++--+
+|  |   A thread or multi-threaded service
++--+
+
+....
+.  .   Component that we will need, but doesn't exist at the moment. A TODO.
+....
+
+--->   Data flow
+<---
+
+
+Page Service
+------------
+
+The Page Service listens for GetPage@LSN requests from the Compute Nodes,
+and responds with pages from the page cache.
+
+
+WAL Receiver
+------------
+
+The WAL receiver connects to the external WAL safekeeping service (or
+directly to the primary) using PostgreSQL physical streaming
+replication, and continuously receives WAL. It decodes the WAL records,
+and stores them to the page cache.
+
+
+Page Cache
+----------
+
+The Page Cache is a data structure, to hold all the different page versions.
+It is accessed by all the other threads, to perform their duties.
+
+Currently, the page cache is implemented fully in-memory. TODO: Store it
+on disk. Define a file format.
+
+
+TODO: Garbage Collection / Compaction
+-------------------------------------
+
+Periodically, the Garbage Collection / Compaction thread runs
+and applies pending WAL records, and removes old page versions that
+are no longer needed.
+
+
+TODO: Backup service
+--------------------
+
+The backup service is responsible for periodically pushing the chunks to S3.
+
+TODO: How/when do restore from S3? Whenever we get a GetPage@LSN request for
+a chunk we don't currently have? Or when an external Control Plane tells us?
+

pageserver/README.md

@@ -1,166 +0,0 @@
-## Page server architecture
-
-The Page Server has a few different duties:
-
-- Respond to GetPage@LSN requests from the Compute Nodes
-- Receive WAL from WAL safekeeper
-- Replay WAL that's applicable to the chunks that the Page Server maintains
-- Backup to S3
-
-S3 is the main fault-tolerant storage of all data, as there are no Page Server
-replicas. We use a separate fault-tolerant WAL service to reduce latency. It
-keeps track of WAL records which are not syncted to S3 yet.
-
-The Page Server consists of multiple threads that operate on a shared
-repository of page versions:
-
-                                           | WAL
-                                           V
-                                   +--------------+
-                                   |              |
-                                   | WAL receiver |
-                                   |              |
-                                   +--------------+
-                                                                                 +----+
-                  +---------+                              ..........            |    |
-                  |         |                              .        .            |    |
- GetPage@LSN      |         |                              . backup .  ------->  | S3 |
-------------->    |  Page   |         repository           .        .            |    |
-                  | Service |                              ..........            |    |
-   page           |         |                                                    +----+
-<-------------    |         |
-                  +---------+      +--------------------+
-		                   |   Checkpointing /  |
-				   | Garbage collection |
-                                   +--------------------+
-
-Legend:
-
-+--+
-|  |   A thread or multi-threaded service
-+--+
-
-....
-.  .   Component at its early development phase.
-....
-
---->   Data flow
-<---
-
-
-Page Service
-------------
-
-The Page Service listens for GetPage@LSN requests from the Compute Nodes,
-and responds with pages from the repository.
-
-
-WAL Receiver
-------------
-
-The WAL receiver connects to the external WAL safekeeping service (or
-directly to the primary) using PostgreSQL physical streaming
-replication, and continuously receives WAL. It decodes the WAL records,
-and stores them to the repository.
-
-
-Repository
-----------
-
-The repository stores all the page versions, or WAL records needed to
-reconstruct them. Each tenant has a separate Repository, which is
-stored in the .zenith/tenants/<tenantid> directory.
-
-Repository is an abstract trait, defined in `repository.rs`. It is
-implemented by the LayeredRepository object in
-`layered_repository.rs`. There is only that one implementation of the
-Repository trait, but it's still a useful abstraction that keeps the
-interface for the low-level storage functionality clean. The layered
-storage format is described in layered_repository/README.md.
-
-Each repository consists of multiple Timelines. Timeline is a
-workhorse that accepts page changes from the WAL, and serves
-get_page_at_lsn() and get_rel_size() requests. Note: this has nothing
-to do with PostgreSQL WAL timeline. The term "timeline" is mostly
-interchangeable with "branch", there is a one-to-one mapping from
-branch to timeline. A timeline has a unique ID within the tenant,
-represented as 16-byte hex string that never changes, whereas a
-branch is a user-given name for a timeline.
-
-Each repository also has a WAL redo manager associated with it, see
-`walredo.rs`. The WAL redo manager is used to replay PostgreSQL WAL
-records, whenever we need to reconstruct a page version from WAL to
-satisfy a GetPage@LSN request, or to avoid accumulating too much WAL
-for a page. The WAL redo manager uses a Postgres process running in
-special zenith wal-redo mode to do the actual WAL redo, and
-communicates with the process using a pipe.
-
-
-Checkpointing / Garbage Collection
-----------------------------------
-
-Periodically, the checkpointer thread wakes up and performs housekeeping
-duties on the repository. It has two duties:
-
-### Checkpointing
-
-Flush WAL that has accumulated in memory to disk, so that the old WAL
-can be truncated away in the WAL safekeepers. Also, to free up memory
-for receiving new WAL. This process is called "checkpointing". It's
-similar to checkpointing in PostgreSQL or other DBMSs, but in the page
-server, checkpointing happens on a per-segment basis.
-
-### Garbage collection
-
-Remove old on-disk layer files that are no longer needed according to the
-PITR retention policy
-
-
-### Backup service
-
-The backup service, responsible for storing pageserver recovery data externally.
-
-Currently, pageserver stores its files in a filesystem directory it's pointed to.
-That working directory could be rather ephemeral for such cases as "a pageserver pod running in k8s with no persistent volumes attached".
-Therefore, the server interacts with external, more reliable storage to back up and restore its state.
-
-The code for storage support is extensible and can support arbitrary ones as long as they implement a certain Rust trait.
-There are the following implementations present:
-* local filesystem — to use in tests mainly
-* AWS S3           - to use in production
-
-Implementation details are covered in the [backup readme](./src/remote_storage/README.md) and corresponding Rust file docs.
-
-The backup service is disabled by default and can be enabled to interact with a single remote storage.
-
-CLI examples:
-* Local FS: `${PAGESERVER_BIN} --remote-storage-local-path="/some/local/path/"`
-* AWS S3  : `${PAGESERVER_BIN} --remote-storage-s3-bucket="some-sample-bucket" --remote-storage-region="eu-north-1" --remote-storage-access-key="SOMEKEYAAAAASADSAH*#" --remote-storage-secret-access-key="SOMEsEcReTsd292v"`
-
-For Amazon AWS S3, a key id and secret access key could be located in `~/.aws/credentials` if awscli was ever configured to work with the desired bucket, on the AWS Settings page for a certain user. Also note, that the bucket names does not contain any protocols when used on AWS.
-For local S3 installations, refer to the their documentation for name format and credentials.
-
-Similar to other pageserver settings, toml config file can be used to configure either of the storages as backup targets.
-Required sections are:
-
-```toml
-[remote_storage]
-local_path = '/Users/someonetoignore/Downloads/tmp_dir/'
-```
-
-or
-
-```toml
-[remote_storage]
-bucket_name = 'some-sample-bucket'
-bucket_region = 'eu-north-1'
-access_key_id = 'SOMEKEYAAAAASADSAH*#'
-secret_access_key = 'SOMEsEcReTsd292v'
-```
-
-Also, `AWS_SECRET_ACCESS_KEY` and `AWS_ACCESS_KEY_ID` variables can be used to specify the credentials instead of any of the ways above.
-
-TODO: Sharding
---------------------
-
-We should be able to run multiple Page Servers that handle sharded data.

pageserver/launch.sh

@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+# Set up a simple Compute Node + Page Server combination locally.
+#
+# NOTE: This doesn't clean up between invocations. You'll need to manually:
+#
+# - Kill any previous 'postgres' and 'pageserver' processes
+# - Clear the S3 bucket
+# - Remove the 'zenith-pgdata' directory
+
+
+set -e
+
+# Set up some config.
+#
+# CHANGE THESE ACCORDING TO YOUR S3 INSTALLATION
+export S3_REGION=auto
+export S3_ENDPOINT=https://localhost:9000
+export S3_ACCESSKEY=minioadmin
+export S3_SECRET=pikkunen
+export S3_BUCKET=zenith-testbucket
+
+
+COMPUTE_NODE_PGDATA=zenith-pgdata
+
+
+# 1. Initialize a cluster.
+initdb -D $COMPUTE_NODE_PGDATA -U zenith
+
+echo "port=65432" >> $COMPUTE_NODE_PGDATA/postgresql.conf
+echo "log_connections=on" >> $COMPUTE_NODE_PGDATA/postgresql.conf
+
+# Use a small shared_buffers, so that we hit the Page Server more
+# easily.
+echo "shared_buffers = 1MB" >> $COMPUTE_NODE_PGDATA/postgresql.conf
+
+# TODO: page server should use a replication slot, or some other mechanism
+# to make sure that the primary doesn't lose data that the page server still
+# needs. (The WAL safekeepers should ensure that)
+echo "wal_keep_size=10GB" >> $COMPUTE_NODE_PGDATA/postgresql.conf
+
+# Tell the Postgres server how to connect to the Page Server
+echo "page_server_connstring='host=localhost port=5430'" >> $COMPUTE_NODE_PGDATA/postgresql.conf
+
+
+# 2. Run zenith_push to push a base backup fo the database to an S3 bucket. The
+# Page Server will read it from there
+zenith_push -D $COMPUTE_NODE_PGDATA
+
+
+# 3. Launch page server
+rm -rf /tmp/pgdata-dummy
+initdb -N -D /tmp/pgdata-dummy
+PGDATA=/tmp/pgdata-dummy ./target/debug/pageserver  &
+
+# 4. Start up the Postgres server
+postgres -D $COMPUTE_NODE_PGDATA &
+
+
+echo "ALL SET! You can now connect to Postgres with something like:"
+echo ""
+echo 'psql "dbname=postgres host=localhost user=zenith port=65432"'

pageserver/src/basebackup.rs

@@ -1,334 +1,158 @@
-//!
-//! Generate a tarball with files needed to bootstrap ComputeNode.
-//!
-//! TODO: this module has nothing to do with PostgreSQL pg_basebackup.
-//! It could use a better name.
-//!
-//! Stateless Postgres compute node is launched by sending a tarball
-//! which contains non-relational data (multixacts, clog, filenodemaps, twophase files),
-//! generated pg_control and dummy segment of WAL.
-//! This module is responsible for creation of such tarball
-//! from data stored in object storage.
-//!
-use anyhow::{Context, Result};
-use bytes::{BufMut, BytesMut};
+use crate::ZTimelineId;
 use log::*;
-use std::fmt::Write as FmtWrite;
-use std::io;
+use postgres_ffi::FilePathError;
+use regex::Regex;
 use std::io::Write;
-use std::sync::Arc;
-use std::time::SystemTime;
-use tar::{Builder, EntryType, Header};
+use tar::Builder;
+use walkdir::WalkDir;
 
-use crate::relish::*;
-use crate::repository::Timeline;
-use postgres_ffi::xlog_utils::*;
-use postgres_ffi::*;
-use zenith_utils::lsn::Lsn;
+pub fn send_snapshot_tarball(
+    write: &mut dyn Write,
+    timelineid: ZTimelineId,
+    snapshotlsn: u64,
+) -> Result<(), std::io::Error> {
+    let mut ar = Builder::new(write);
 
-/// This is short-living object only for the time of tarball creation,
-/// created mostly to avoid passing a lot of parameters between various functions
-/// used for constructing tarball.
-pub struct Basebackup<'a> {
-    ar: Builder<&'a mut dyn Write>,
-    timeline: &'a Arc<dyn Timeline>,
-    pub lsn: Lsn,
-    prev_record_lsn: Lsn,
-}
+    let snappath = format!("timelines/{}/snapshots/{:016X}", timelineid, snapshotlsn);
+    let walpath = format!("timelines/{}/wal", timelineid);
 
-// Create basebackup with non-rel data in it. Omit relational data.
-//
-// Currently we use empty lsn in two cases:
-//  * During the basebackup right after timeline creation
-//  * When working without safekeepers. In this situation it is important to match the lsn
-//    we are taking basebackup on with the lsn that is used in pageserver's walreceiver
-//    to start the replication.
-impl<'a> Basebackup<'a> {
-    pub fn new(
-        write: &'a mut dyn Write,
-        timeline: &'a Arc<dyn Timeline>,
-        req_lsn: Option<Lsn>,
-    ) -> Result<Basebackup<'a>> {
-        // Compute postgres doesn't have any previous WAL files, but the first
-        // record that it's going to write needs to include the LSN of the
-        // previous record (xl_prev). We include prev_record_lsn in the
-        // "zenith.signal" file, so that postgres can read it during startup.
-        //
-        // We don't keep full history of record boundaries in the page server,
-        // however, only the predecessor of the latest record on each
-        // timeline. So we can only provide prev_record_lsn when you take a
-        // base backup at the end of the timeline, i.e. at last_record_lsn.
-        // Even at the end of the timeline, we sometimes don't have a valid
-        // prev_lsn value; that happens if the timeline was just branched from
-        // an old LSN and it doesn't have any WAL of its own yet. We will set
-        // prev_lsn to Lsn(0) if we cannot provide the correct value.
-        let (backup_prev, backup_lsn) = if let Some(req_lsn) = req_lsn {
-            // Backup was requested at a particular LSN. Wait for it to arrive.
-            timeline.wait_lsn(req_lsn)?;
+    debug!("sending tarball of snapshot in {}", snappath);
+    //ar.append_dir_all("", &snappath)?;
 
-            // If the requested point is the end of the timeline, we can
-            // provide prev_lsn. (get_last_record_rlsn() might return it as
-            // zero, though, if no WAL has been generated on this timeline
-            // yet.)
-            let end_of_timeline = timeline.get_last_record_rlsn();
-            if req_lsn == end_of_timeline.last {
-                (end_of_timeline.prev, req_lsn)
-            } else {
-                (Lsn(0), req_lsn)
-            }
-        } else {
-            // Backup was requested at end of the timeline.
-            let end_of_timeline = timeline.get_last_record_rlsn();
-            (end_of_timeline.prev, end_of_timeline.last)
-        };
+    for entry in WalkDir::new(&snappath) {
+        let entry = entry?;
+        let fullpath = entry.path();
+        let relpath = entry.path().strip_prefix(&snappath).unwrap();
 
-        info!(
-            "taking basebackup lsn={}, prev_lsn={}",
-            backup_lsn, backup_prev
-        );
-
-        Ok(Basebackup {
-            ar: Builder::new(write),
-            timeline,
-            lsn: backup_lsn,
-            prev_record_lsn: backup_prev,
-        })
-    }
-
-    pub fn send_tarball(&mut self) -> anyhow::Result<()> {
-        // Create pgdata subdirs structure
-        for dir in pg_constants::PGDATA_SUBDIRS.iter() {
-            let header = new_tar_header_dir(*dir)?;
-            self.ar.append(&header, &mut io::empty())?;
+        if relpath.to_str().unwrap() == "" {
+            continue;
         }
 
-        // Send empty config files.
-        for filepath in pg_constants::PGDATA_SPECIAL_FILES.iter() {
-            if *filepath == "pg_hba.conf" {
-                let data = pg_constants::PG_HBA.as_bytes();
-                let header = new_tar_header(filepath, data.len() as u64)?;
-                self.ar.append(&header, data)?;
-            } else {
-                let header = new_tar_header(filepath, 0)?;
-                self.ar.append(&header, &mut io::empty())?;
-            }
-        }
-
-        // Gather non-relational files from object storage pages.
-        for obj in self.timeline.list_nonrels(self.lsn)? {
-            match obj {
-                RelishTag::Slru { slru, segno } => {
-                    self.add_slru_segment(slru, segno)?;
-                }
-                RelishTag::FileNodeMap { spcnode, dbnode } => {
-                    self.add_relmap_file(spcnode, dbnode)?;
-                }
-                RelishTag::TwoPhase { xid } => {
-                    self.add_twophase_file(xid)?;
-                }
-                _ => {}
-            }
-        }
-
-        // Generate pg_control and bootstrap WAL segment.
-        self.add_pgcontrol_file()?;
-        self.ar.finish()?;
-        debug!("all tarred up!");
-        Ok(())
-    }
-
-    //
-    // Generate SLRU segment files from repository.
-    //
-    fn add_slru_segment(&mut self, slru: SlruKind, segno: u32) -> anyhow::Result<()> {
-        let seg_size = self
-            .timeline
-            .get_relish_size(RelishTag::Slru { slru, segno }, self.lsn)?;
-
-        if seg_size == None {
+        if entry.file_type().is_dir() {
             trace!(
-                "SLRU segment {}/{:>04X} was truncated",
-                slru.to_str(),
-                segno
+                "sending dir {} as {}",
+                fullpath.display(),
+                relpath.display()
             );
-            return Ok(());
-        }
-
-        let nblocks = seg_size.unwrap();
-
-        let mut slru_buf: Vec<u8> =
-            Vec::with_capacity(nblocks as usize * pg_constants::BLCKSZ as usize);
-        for blknum in 0..nblocks {
-            let img =
-                self.timeline
-                    .get_page_at_lsn(RelishTag::Slru { slru, segno }, blknum, self.lsn)?;
-            assert!(img.len() == pg_constants::BLCKSZ as usize);
-
-            slru_buf.extend_from_slice(&img);
-        }
-
-        let segname = format!("{}/{:>04X}", slru.to_str(), segno);
-        let header = new_tar_header(&segname, slru_buf.len() as u64)?;
-        self.ar.append(&header, slru_buf.as_slice())?;
-
-        trace!("Added to basebackup slru {} relsize {}", segname, nblocks);
-        Ok(())
-    }
-
-    //
-    // Extract pg_filenode.map files from repository
-    // Along with them also send PG_VERSION for each database.
-    //
-    fn add_relmap_file(&mut self, spcnode: u32, dbnode: u32) -> anyhow::Result<()> {
-        let img = self.timeline.get_page_at_lsn(
-            RelishTag::FileNodeMap { spcnode, dbnode },
-            0,
-            self.lsn,
-        )?;
-        let path = if spcnode == pg_constants::GLOBALTABLESPACE_OID {
-            let version_bytes = pg_constants::PG_MAJORVERSION.as_bytes();
-            let header = new_tar_header("PG_VERSION", version_bytes.len() as u64)?;
-            self.ar.append(&header, version_bytes)?;
-
-            let header = new_tar_header("global/PG_VERSION", version_bytes.len() as u64)?;
-            self.ar.append(&header, version_bytes)?;
-
-            String::from("global/pg_filenode.map") // filenode map for global tablespace
-        } else {
-            // User defined tablespaces are not supported
-            assert!(spcnode == pg_constants::DEFAULTTABLESPACE_OID);
-
-            // Append dir path for each database
-            let path = format!("base/{}", dbnode);
-            let header = new_tar_header_dir(&path)?;
-            self.ar.append(&header, &mut io::empty())?;
-
-            let dst_path = format!("base/{}/PG_VERSION", dbnode);
-            let version_bytes = pg_constants::PG_MAJORVERSION.as_bytes();
-            let header = new_tar_header(&dst_path, version_bytes.len() as u64)?;
-            self.ar.append(&header, version_bytes)?;
-
-            format!("base/{}/pg_filenode.map", dbnode)
-        };
-        assert!(img.len() == 512);
-        let header = new_tar_header(&path, img.len() as u64)?;
-        self.ar.append(&header, &img[..])?;
-        Ok(())
-    }
-
-    //
-    // Extract twophase state files
-    //
-    fn add_twophase_file(&mut self, xid: TransactionId) -> anyhow::Result<()> {
-        let img = self
-            .timeline
-            .get_page_at_lsn(RelishTag::TwoPhase { xid }, 0, self.lsn)?;
-
-        let mut buf = BytesMut::new();
-        buf.extend_from_slice(&img[..]);
-        let crc = crc32c::crc32c(&img[..]);
-        buf.put_u32_le(crc);
-        let path = format!("pg_twophase/{:>08X}", xid);
-        let header = new_tar_header(&path, buf.len() as u64)?;
-        self.ar.append(&header, &buf[..])?;
-
-        Ok(())
-    }
-
-    //
-    // Add generated pg_control file and bootstrap WAL segment.
-    // Also send zenith.signal file with extra bootstrap data.
-    //
-    fn add_pgcontrol_file(&mut self) -> anyhow::Result<()> {
-        let checkpoint_bytes = self
-            .timeline
-            .get_page_at_lsn(RelishTag::Checkpoint, 0, self.lsn)
-            .context("failed to get checkpoint bytes")?;
-        let pg_control_bytes = self
-            .timeline
-            .get_page_at_lsn(RelishTag::ControlFile, 0, self.lsn)
-            .context("failed get control bytes")?;
-        let mut pg_control = ControlFileData::decode(&pg_control_bytes)?;
-        let mut checkpoint = CheckPoint::decode(&checkpoint_bytes)?;
-
-        // Generate new pg_control needed for bootstrap
-        checkpoint.redo = normalize_lsn(self.lsn, pg_constants::WAL_SEGMENT_SIZE).0;
-
-        //reset some fields we don't want to preserve
-        //TODO Check this.
-        //We may need to determine the value from twophase data.
-        checkpoint.oldestActiveXid = 0;
-
-        //save new values in pg_control
-        pg_control.checkPoint = 0;
-        pg_control.checkPointCopy = checkpoint;
-        pg_control.state = pg_constants::DB_SHUTDOWNED;
-
-        // add zenith.signal file
-        let mut zenith_signal = String::new();
-        if self.prev_record_lsn == Lsn(0) {
-            if self.lsn == self.timeline.get_ancestor_lsn() {
-                write!(zenith_signal, "PREV LSN: none")?;
+            ar.append_dir(relpath, fullpath)?;
+        } else if entry.file_type().is_symlink() {
+            error!("ignoring symlink in snapshot dir");
+        } else if entry.file_type().is_file() {
+            // Shared catalogs are exempt
+            if relpath.starts_with("global/") {
+                trace!("sending shared catalog {}", relpath.display());
+                ar.append_path_with_name(fullpath, relpath)?;
+            } else if !is_rel_file_path(relpath.to_str().unwrap()) {
+                trace!("sending {}", relpath.display());
+                ar.append_path_with_name(fullpath, relpath)?;
             } else {
-                write!(zenith_signal, "PREV LSN: invalid")?;
+                trace!("not sending {}", relpath.display());
+                // FIXME: send all files for now
+                ar.append_path_with_name(fullpath, relpath)?;
             }
         } else {
-            write!(zenith_signal, "PREV LSN: {}", self.prev_record_lsn)?;
+            error!("unknown file type: {}", fullpath.display());
         }
-        self.ar.append(
-            &new_tar_header("zenith.signal", zenith_signal.len() as u64)?,
-            zenith_signal.as_bytes(),
-        )?;
+    }
 
-        //send pg_control
-        let pg_control_bytes = pg_control.encode();
-        let header = new_tar_header("global/pg_control", pg_control_bytes.len() as u64)?;
-        self.ar.append(&header, &pg_control_bytes[..])?;
+    // FIXME: also send all the WAL
+    for entry in std::fs::read_dir(&walpath)? {
+        let entry = entry?;
+        let fullpath = &entry.path();
+        let relpath = fullpath.strip_prefix(&walpath).unwrap();
+
+        if !entry.path().is_file() {
+            continue;
+        }
+
+        let archive_fname = relpath.to_str().unwrap();
+        let archive_fname = archive_fname
+            .strip_suffix(".partial")
+            .unwrap_or(&archive_fname);
+        let archive_path = "pg_wal/".to_owned() + archive_fname;
+        ar.append_path_with_name(fullpath, archive_path)?;
+    }
+
+    ar.finish()?;
+    debug!("all tarred up!");
+    Ok(())
+}
+
+// formats:
+// <oid>
+// <oid>_<fork name>
+// <oid>.<segment number>
+// <oid>_<fork name>.<segment number>
+
+fn parse_filename(fname: &str) -> Result<(u32, u8, u32), FilePathError> {
+    let re = Regex::new(r"^(?P<relnode>\d+)(_(?P<forkname>[a-z]+))?(\.(?P<segno>\d+))?$").unwrap();
+
+    let caps = re
+        .captures(fname)
+        .ok_or_else(|| FilePathError::new("invalid relation data file name"))?;
+
+    let relnode_str = caps.name("relnode").unwrap().as_str();
+    let relnode = u32::from_str_radix(relnode_str, 10)?;
+
+    let forkname = caps.name("forkname").map(|f| f.as_str());
+    let forknum = postgres_ffi::forkname_to_forknum(forkname)?;
+
+    let segno_match = caps.name("segno");
+    let segno = if segno_match.is_none() {
+        0
+    } else {
+        u32::from_str_radix(segno_match.unwrap().as_str(), 10)?
+    };
+
+    Ok((relnode, forknum, segno))
+}
+
+fn parse_rel_file_path(path: &str) -> Result<(), FilePathError> {
+    /*
+     * Relation data files can be in one of the following directories:
+     *
+     * global/
+     *		shared relations
+     *
+     * base/<db oid>/
+     *		regular relations, default tablespace
+     *
+     * pg_tblspc/<tblspc oid>/<tblspc version>/
+     *		within a non-default tablespace (the name of the directory
+     *		depends on version)
+     *
+     * And the relation data files themselves have a filename like:
+     *
+     * <oid>.<segment number>
+     */
+    if let Some(fname) = path.strip_prefix("global/") {
+        let (_relnode, _forknum, _segno) = parse_filename(fname)?;
 
-        //send wal segment
-        let segno = self.lsn.segment_number(pg_constants::WAL_SEGMENT_SIZE);
-        let wal_file_name = XLogFileName(PG_TLI, segno, pg_constants::WAL_SEGMENT_SIZE);
-        let wal_file_path = format!("pg_wal/{}", wal_file_name);
-        let header = new_tar_header(&wal_file_path, pg_constants::WAL_SEGMENT_SIZE as u64)?;
-        let wal_seg = generate_wal_segment(segno, pg_control.system_identifier);
-        assert!(wal_seg.len() == pg_constants::WAL_SEGMENT_SIZE);
-        self.ar.append(&header, &wal_seg[..])?;
         Ok(())
+    } else if let Some(dbpath) = path.strip_prefix("base/") {
+        let mut s = dbpath.split('/');
+        let dbnode_str = s
+            .next()
+            .ok_or_else(|| FilePathError::new("invalid relation data file name"))?;
+        let _dbnode = u32::from_str_radix(dbnode_str, 10)?;
+        let fname = s
+            .next()
+            .ok_or_else(|| FilePathError::new("invalid relation data file name"))?;
+        if s.next().is_some() {
+            return Err(FilePathError::new("invalid relation data file name"));
+        };
+
+        let (_relnode, _forknum, _segno) = parse_filename(fname)?;
+
+        Ok(())
+    } else if let Some(_) = path.strip_prefix("pg_tblspc/") {
+        // TODO
+        Err(FilePathError::new("tablespaces not supported"))
+    } else {
+        Err(FilePathError::new("invalid relation data file name"))
     }
 }
 
-//
-// Create new tarball entry header
-//
-fn new_tar_header(path: &str, size: u64) -> anyhow::Result<Header> {
-    let mut header = Header::new_gnu();
-    header.set_size(size);
-    header.set_path(path)?;
-    header.set_mode(0b110000000); // -rw-------
-    header.set_mtime(
-        // use currenttime as last modified time
-        SystemTime::now()
-            .duration_since(SystemTime::UNIX_EPOCH)
-            .unwrap()
-            .as_secs(),
-    );
-    header.set_cksum();
-    Ok(header)
-}
-
-fn new_tar_header_dir(path: &str) -> anyhow::Result<Header> {
-    let mut header = Header::new_gnu();
-    header.set_size(0);
-    header.set_path(path)?;
-    header.set_mode(0o755); // -rw-------
-    header.set_entry_type(EntryType::dir());
-    header.set_mtime(
-        // use currenttime as last modified time
-        SystemTime::now()
-            .duration_since(SystemTime::UNIX_EPOCH)
-            .unwrap()
-            .as_secs(),
-    );
-    header.set_cksum();
-    Ok(header)
+fn is_rel_file_path(path: &str) -> bool {
+    parse_rel_file_path(path).is_ok()
 }

pageserver/src/bin/dump_layerfile.rs

@@ -1,31 +0,0 @@
-//! Main entry point for the dump_layerfile executable
-//!
-//! A handy tool for debugging, that's all.
-use anyhow::Result;
-use clap::{App, Arg};
-use pageserver::layered_repository::dump_layerfile_from_path;
-use pageserver::virtual_file;
-use std::path::PathBuf;
-use zenith_utils::GIT_VERSION;
-
-fn main() -> Result<()> {
-    let arg_matches = App::new("Zenith dump_layerfile utility")
-        .about("Dump contents of one layer file, for debugging")
-        .version(GIT_VERSION)
-        .arg(
-            Arg::with_name("path")
-                .help("Path to file to dump")
-                .required(true)
-                .index(1),
-        )
-        .get_matches();
-
-    let path = PathBuf::from(arg_matches.value_of("path").unwrap());
-
-    // Basic initialization of things that don't change after startup
-    virtual_file::init(10);
-
-    dump_layerfile_from_path(&path)?;
-
-    Ok(())
-}

pageserver/src/bin/pageserver.rs

@@ -2,304 +2,43 @@
 // Main entry point for the Page Server executable
 //
 
-use serde::{Deserialize, Serialize};
-use std::{
-    env,
-    num::{NonZeroU32, NonZeroUsize},
-    path::{Path, PathBuf},
-    str::FromStr,
-    thread,
-};
-use tracing::*;
-use zenith_utils::{auth::JwtAuth, logging, postgres_backend::AuthType, tcp_listener, GIT_VERSION};
+use log::*;
+use parse_duration::parse;
+use std::fs::{self, OpenOptions};
+use std::io;
+use std::process::exit;
+use std::thread;
+use std::time::Duration;
 
-use anyhow::{bail, ensure, Context, Result};
-
-use clap::{App, Arg, ArgMatches};
+use anyhow::{Context, Result};
+use clap::{App, Arg};
 use daemonize::Daemonize;
 
-use pageserver::{
-    branches, defaults::*, http, page_cache, page_service, remote_storage, tenant_mgr,
-    virtual_file, PageServerConf, RemoteStorageConfig, RemoteStorageKind, S3Config, LOG_FILE_NAME,
-};
-use zenith_utils::http::endpoint;
-use zenith_utils::postgres_backend;
-use zenith_utils::shutdown::exit_now;
-use zenith_utils::signals::{self, Signal};
+use slog::Drain;
 
-use const_format::formatcp;
+use pageserver::{page_service, tui, zenith_repo_dir, PageServerConf};
 
-/// String arguments that can be declared via CLI or config file
-#[derive(Serialize, Deserialize, PartialEq, Eq, Clone)]
-struct CfgFileParams {
-    listen_pg_addr: Option<String>,
-    listen_http_addr: Option<String>,
-    checkpoint_distance: Option<String>,
-    checkpoint_period: Option<String>,
-    gc_horizon: Option<String>,
-    gc_period: Option<String>,
-    open_mem_limit: Option<String>,
-    page_cache_size: Option<String>,
-    max_file_descriptors: Option<String>,
-    pg_distrib_dir: Option<String>,
-    auth_validation_public_key_path: Option<String>,
-    auth_type: Option<String>,
-    remote_storage_max_concurrent_sync: Option<String>,
-    remote_storage_max_sync_errors: Option<String>,
-    /////////////////////////////////
-    //// Don't put `Option<String>` and other "simple" values below.
-    ////
-    /// `Option<RemoteStorage>` is a <a href='https://toml.io/en/v1.0.0#table'>table</a> in TOML.
-    /// Values in TOML cannot be defined after tables (other tables can),
-    /// and [`toml`] crate serializes all fields in the order of their appearance.
-    ////////////////////////////////
-    remote_storage: Option<RemoteStorage>,
-}
-
-#[derive(Serialize, Deserialize, PartialEq, Eq, Clone)]
-// Without this attribute, enums with values won't be serialized by the `toml` library (but can be deserialized nonetheless!).
-// See https://github.com/alexcrichton/toml-rs/blob/6c162e6562c3e432bf04c82a3d1d789d80761a86/examples/enum_external.rs for the examples
-#[serde(untagged)]
-enum RemoteStorage {
-    Local {
-        local_path: String,
-    },
-    AwsS3 {
-        bucket_name: String,
-        bucket_region: String,
-        #[serde(skip_serializing)]
-        access_key_id: Option<String>,
-        #[serde(skip_serializing)]
-        secret_access_key: Option<String>,
-    },
-}
-
-impl CfgFileParams {
-    /// Extract string arguments from CLI
-    fn from_args(arg_matches: &ArgMatches) -> Self {
-        let get_arg = |arg_name: &str| -> Option<String> {
-            arg_matches.value_of(arg_name).map(str::to_owned)
-        };
-
-        let remote_storage = if let Some(local_path) = get_arg("remote-storage-local-path") {
-            Some(RemoteStorage::Local { local_path })
-        } else if let Some((bucket_name, bucket_region)) =
-            get_arg("remote-storage-s3-bucket").zip(get_arg("remote-storage-region"))
-        {
-            Some(RemoteStorage::AwsS3 {
-                bucket_name,
-                bucket_region,
-                access_key_id: get_arg("remote-storage-access-key"),
-                secret_access_key: get_arg("remote-storage-secret-access-key"),
-            })
-        } else {
-            None
-        };
-
-        Self {
-            listen_pg_addr: get_arg("listen_pg_addr"),
-            listen_http_addr: get_arg("listen_http_addr"),
-            checkpoint_distance: get_arg("checkpoint_distance"),
-            checkpoint_period: get_arg("checkpoint_period"),
-            gc_horizon: get_arg("gc_horizon"),
-            gc_period: get_arg("gc_period"),
-            open_mem_limit: get_arg("open_mem_limit"),
-            page_cache_size: get_arg("page_cache_size"),
-            max_file_descriptors: get_arg("max_file_descriptors"),
-            pg_distrib_dir: get_arg("postgres-distrib"),
-            auth_validation_public_key_path: get_arg("auth-validation-public-key-path"),
-            auth_type: get_arg("auth-type"),
-            remote_storage,
-            remote_storage_max_concurrent_sync: get_arg("remote-storage-max-concurrent-sync"),
-            remote_storage_max_sync_errors: get_arg("remote-storage-max-sync-errors"),
-        }
-    }
-
-    /// Fill missing values in `self` with `other`
-    fn or(self, other: CfgFileParams) -> Self {
-        // TODO cleaner way to do this
-        Self {
-            listen_pg_addr: self.listen_pg_addr.or(other.listen_pg_addr),
-            listen_http_addr: self.listen_http_addr.or(other.listen_http_addr),
-            checkpoint_distance: self.checkpoint_distance.or(other.checkpoint_distance),
-            checkpoint_period: self.checkpoint_period.or(other.checkpoint_period),
-            gc_horizon: self.gc_horizon.or(other.gc_horizon),
-            gc_period: self.gc_period.or(other.gc_period),
-            open_mem_limit: self.open_mem_limit.or(other.open_mem_limit),
-            page_cache_size: self.page_cache_size.or(other.page_cache_size),
-            max_file_descriptors: self.max_file_descriptors.or(other.max_file_descriptors),
-            pg_distrib_dir: self.pg_distrib_dir.or(other.pg_distrib_dir),
-            auth_validation_public_key_path: self
-                .auth_validation_public_key_path
-                .or(other.auth_validation_public_key_path),
-            auth_type: self.auth_type.or(other.auth_type),
-            remote_storage: self.remote_storage.or(other.remote_storage),
-            remote_storage_max_concurrent_sync: self
-                .remote_storage_max_concurrent_sync
-                .or(other.remote_storage_max_concurrent_sync),
-            remote_storage_max_sync_errors: self
-                .remote_storage_max_sync_errors
-                .or(other.remote_storage_max_sync_errors),
-        }
-    }
-
-    /// Create a PageServerConf from these string parameters
-    fn try_into_config(&self) -> Result<PageServerConf> {
-        let workdir = PathBuf::from(".");
-
-        let listen_pg_addr = match self.listen_pg_addr.as_ref() {
-            Some(addr) => addr.clone(),
-            None => DEFAULT_PG_LISTEN_ADDR.to_owned(),
-        };
-
-        let listen_http_addr = match self.listen_http_addr.as_ref() {
-            Some(addr) => addr.clone(),
-            None => DEFAULT_HTTP_LISTEN_ADDR.to_owned(),
-        };
-
-        let checkpoint_distance: u64 = match self.checkpoint_distance.as_ref() {
-            Some(checkpoint_distance_str) => checkpoint_distance_str.parse()?,
-            None => DEFAULT_CHECKPOINT_DISTANCE,
-        };
-        let checkpoint_period = match self.checkpoint_period.as_ref() {
-            Some(checkpoint_period_str) => humantime::parse_duration(checkpoint_period_str)?,
-            None => DEFAULT_CHECKPOINT_PERIOD,
-        };
-
-        let gc_horizon: u64 = match self.gc_horizon.as_ref() {
-            Some(horizon_str) => horizon_str.parse()?,
-            None => DEFAULT_GC_HORIZON,
-        };
-        let gc_period = match self.gc_period.as_ref() {
-            Some(period_str) => humantime::parse_duration(period_str)?,
-            None => DEFAULT_GC_PERIOD,
-        };
-
-        let open_mem_limit: usize = match self.open_mem_limit.as_ref() {
-            Some(open_mem_limit_str) => open_mem_limit_str.parse()?,
-            None => DEFAULT_OPEN_MEM_LIMIT,
-        };
-
-        let page_cache_size: usize = match self.page_cache_size.as_ref() {
-            Some(page_cache_size_str) => page_cache_size_str.parse()?,
-            None => DEFAULT_PAGE_CACHE_SIZE,
-        };
-
-        let max_file_descriptors: usize = match self.max_file_descriptors.as_ref() {
-            Some(max_file_descriptors_str) => max_file_descriptors_str.parse()?,
-            None => DEFAULT_MAX_FILE_DESCRIPTORS,
-        };
-
-        let pg_distrib_dir = match self.pg_distrib_dir.as_ref() {
-            Some(pg_distrib_dir_str) => PathBuf::from(pg_distrib_dir_str),
-            None => env::current_dir()?.join("tmp_install"),
-        };
-
-        let auth_validation_public_key_path = self
-            .auth_validation_public_key_path
-            .as_ref()
-            .map(PathBuf::from);
-
-        let auth_type = self
-            .auth_type
-            .as_ref()
-            .map_or(Ok(AuthType::Trust), |auth_type| {
-                AuthType::from_str(auth_type)
-            })?;
-
-        if !pg_distrib_dir.join("bin/postgres").exists() {
-            bail!("Can't find postgres binary at {:?}", pg_distrib_dir);
-        }
-
-        if auth_type == AuthType::ZenithJWT {
-            ensure!(
-                auth_validation_public_key_path.is_some(),
-                "Missing auth_validation_public_key_path when auth_type is ZenithJWT"
-            );
-            let path_ref = auth_validation_public_key_path.as_ref().unwrap();
-            ensure!(
-                path_ref.exists(),
-                format!("Can't find auth_validation_public_key at {:?}", path_ref)
-            );
-        }
-
-        let max_concurrent_sync = match self.remote_storage_max_concurrent_sync.as_deref() {
-            Some(number_str) => number_str.parse()?,
-            None => NonZeroUsize::new(DEFAULT_REMOTE_STORAGE_MAX_CONCURRENT_SYNC).unwrap(),
-        };
-        let max_sync_errors = match self.remote_storage_max_sync_errors.as_deref() {
-            Some(number_str) => number_str.parse()?,
-            None => NonZeroU32::new(DEFAULT_REMOTE_STORAGE_MAX_SYNC_ERRORS).unwrap(),
-        };
-        let remote_storage_config = self.remote_storage.as_ref().map(|storage_params| {
-            let storage = match storage_params.clone() {
-                RemoteStorage::Local { local_path } => {
-                    RemoteStorageKind::LocalFs(PathBuf::from(local_path))
-                }
-                RemoteStorage::AwsS3 {
-                    bucket_name,
-                    bucket_region,
-                    access_key_id,
-                    secret_access_key,
-                } => RemoteStorageKind::AwsS3(S3Config {
-                    bucket_name,
-                    bucket_region,
-                    access_key_id,
-                    secret_access_key,
-                }),
-            };
-            RemoteStorageConfig {
-                max_concurrent_sync,
-                max_sync_errors,
-                storage,
-            }
-        });
-
-        Ok(PageServerConf {
-            daemonize: false,
-
-            listen_pg_addr,
-            listen_http_addr,
-            checkpoint_distance,
-            checkpoint_period,
-            gc_horizon,
-            gc_period,
-            open_mem_limit,
-            page_cache_size,
-            max_file_descriptors,
-
-            superuser: String::from(DEFAULT_SUPERUSER),
-
-            workdir,
-
-            pg_distrib_dir,
-
-            auth_validation_public_key_path,
-            auth_type,
-            remote_storage_config,
-        })
-    }
-}
+const DEFAULT_GC_HORIZON: u64 = 64 * 1024 * 1024;
+const DEFAULT_GC_PERIOD_SEC: u64 = 10;
+//const DEFAULT_GC_HORIZON: u64 = 1024 * 1024 * 1024;
+//const DEFAULT_GC_PERIOD_SEC: u64 = 600;
 
 fn main() -> Result<()> {
-    zenith_metrics::set_common_metrics_prefix("pageserver");
     let arg_matches = App::new("Zenith page server")
         .about("Materializes WAL stream to pages and serves them to the postgres")
-        .version(GIT_VERSION)
         .arg(
-            Arg::with_name("listen_pg_addr")
+            Arg::with_name("listen")
                 .short("l")
-                .long("listen_pg_addr")
-                .aliases(&["listen", "listen-pg"]) // keep some compatibility
+                .long("listen")
                 .takes_value(true)
-                .help(formatcp!("listen for incoming page requests on ip:port (default: {DEFAULT_PG_LISTEN_ADDR})")),
+                .help("listen for incoming page requests on ip:port (default: 127.0.0.1:5430)"),
         )
         .arg(
-            Arg::with_name("listen_http_addr")
-                .long("listen_http_addr")
-                .aliases(&["http_endpoint", "listen-http"]) // keep some compatibility
-                .takes_value(true)
-                .help(formatcp!("http endpoint address for metrics and management API calls on ip:port (default: {DEFAULT_HTTP_LISTEN_ADDR})")),
+            Arg::with_name("interactive")
+                .short("i")
+                .long("interactive")
+                .takes_value(false)
+                .help("Interactive mode"),
         )
         .arg(
             Arg::with_name("daemonize")
@@ -308,24 +47,6 @@ fn main() -> Result<()> {
                 .takes_value(false)
                 .help("Run in the background"),
         )
-        .arg(
-            Arg::with_name("init")
-                .long("init")
-                .takes_value(false)
-                .help("Initialize pageserver repo"),
-        )
-        .arg(
-            Arg::with_name("checkpoint_distance")
-                .long("checkpoint_distance")
-                .takes_value(true)
-                .help("Distance from current LSN to perform checkpoint of in-memory layers"),
-        )
-        .arg(
-            Arg::with_name("checkpoint_period")
-                .long("checkpoint_period")
-                .takes_value(true)
-                .help("Interval between checkpoint iterations"),
-        )
         .arg(
             Arg::with_name("gc_horizon")
                 .long("gc_horizon")
@@ -338,447 +59,186 @@ fn main() -> Result<()> {
                 .takes_value(true)
                 .help("Interval between garbage collector iterations"),
         )
-        .arg(
-            Arg::with_name("open_mem_limit")
-                .long("open_mem_limit")
-                .takes_value(true)
-                .help("Amount of memory reserved for buffering incoming WAL"),
-        )
-        .arg(
-
-            Arg::with_name("page_cache_size")
-                .long("page_cache_size")
-                .takes_value(true)
-                .help("Number of pages in the page cache"),
-        )
-        .arg(
-            Arg::with_name("max_file_descriptors")
-                .long("max_file_descriptors")
-                .takes_value(true)
-                .help("Max number of file descriptors to keep open for files"),
-        )
-        .arg(
-            Arg::with_name("workdir")
-                .short("D")
-                .long("workdir")
-                .takes_value(true)
-                .help("Working directory for the pageserver"),
-        )
-        .arg(
-            Arg::with_name("postgres-distrib")
-                .long("postgres-distrib")
-                .takes_value(true)
-                .help("Postgres distribution directory"),
-        )
-        .arg(
-            Arg::with_name("create-tenant")
-                .long("create-tenant")
-                .takes_value(true)
-                .help("Create tenant during init")
-                .requires("init"),
-        )
-        .arg(
-            Arg::with_name("auth-validation-public-key-path")
-                .long("auth-validation-public-key-path")
-                .takes_value(true)
-                .help("Path to public key used to validate jwt signature"),
-        )
-        .arg(
-            Arg::with_name("auth-type")
-                .long("auth-type")
-                .takes_value(true)
-                .help("Authentication scheme type. One of: Trust, MD5, ZenithJWT"),
-        )
-        .arg(
-            Arg::with_name("remote-storage-local-path")
-                .long("remote-storage-local-path")
-                .takes_value(true)
-                .help("Path to the local directory, to be used as an external remote storage")
-                .conflicts_with_all(&[
-                    "remote-storage-s3-bucket",
-                    "remote-storage-region",
-                    "remote-storage-access-key",
-                    "remote-storage-secret-access-key",
-                ]),
-        )
-        .arg(
-            Arg::with_name("remote-storage-s3-bucket")
-                .long("remote-storage-s3-bucket")
-                .takes_value(true)
-                .help("Name of the AWS S3 bucket to use an external remote storage")
-                .requires("remote-storage-region"),
-        )
-        .arg(
-            Arg::with_name("remote-storage-region")
-                .long("remote-storage-region")
-                .takes_value(true)
-                .help("Region of the AWS S3 bucket"),
-        )
-        .arg(
-            Arg::with_name("remote-storage-access-key")
-                .long("remote-storage-access-key")
-                .takes_value(true)
-                .help("Credentials to access the AWS S3 bucket"),
-        )
-        .arg(
-            Arg::with_name("remote-storage-secret-access-key")
-                .long("remote-storage-secret-access-key")
-                .takes_value(true)
-                .help("Credentials to access the AWS S3 bucket"),
-        )
-        .arg(
-            Arg::with_name("remote-storage-max-concurrent-sync")
-                .long("remote-storage-max-concurrent-sync")
-                .takes_value(true)
-                .help("Maximum allowed concurrent synchronisations with storage"),
-        )
         .get_matches();
 
-    let workdir = Path::new(arg_matches.value_of("workdir").unwrap_or(".zenith"));
-    let cfg_file_path = workdir
-        .canonicalize()
-        .with_context(|| format!("Error opening workdir '{}'", workdir.display()))?
-        .join("pageserver.toml");
-
-    let args_params = CfgFileParams::from_args(&arg_matches);
-
-    let init = arg_matches.is_present("init");
-    let create_tenant = arg_matches.value_of("create-tenant");
-
-    let params = if init {
-        // We're initializing the repo, so there's no config file yet
-        args_params
-    } else {
-        // Supplement the CLI arguments with the config file
-        let cfg_file_contents = std::fs::read_to_string(&cfg_file_path)
-            .with_context(|| format!("No pageserver config at '{}'", cfg_file_path.display()))?;
-        let file_params: CfgFileParams = toml::from_str(&cfg_file_contents).with_context(|| {
-            format!(
-                "Failed to read '{}' as pageserver config",
-                cfg_file_path.display()
-            )
-        })?;
-        args_params.or(file_params)
+    let mut conf = PageServerConf {
+        daemonize: false,
+        interactive: false,
+        gc_horizon: DEFAULT_GC_HORIZON,
+        gc_period: Duration::from_secs(DEFAULT_GC_PERIOD_SEC),
+        listen_addr: "127.0.0.1:5430".parse().unwrap(),
     };
 
-    // Set CWD to workdir for non-daemon modes
-    env::set_current_dir(&workdir).with_context(|| {
-        format!(
-            "Failed to set application's current dir to '{}'",
-            workdir.display()
-        )
-    })?;
-
-    // Ensure the config is valid, even if just init-ing
-    let mut conf = params.try_into_config().with_context(|| {
-        format!(
-            "Pageserver config at '{}' is not valid",
-            cfg_file_path.display()
-        )
-    })?;
-
-    conf.daemonize = arg_matches.is_present("daemonize");
-
-    if init && conf.daemonize {
-        bail!("--daemonize cannot be used with --init")
+    if arg_matches.is_present("daemonize") {
+        conf.daemonize = true;
     }
 
-    // The configuration is all set up now. Turn it into a 'static
-    // that can be freely stored in structs and passed across threads
-    // as a ref.
-    let conf: &'static PageServerConf = Box::leak(Box::new(conf));
-
-    // Basic initialization of things that don't change after startup
-    virtual_file::init(conf.max_file_descriptors);
-
-    page_cache::init(conf);
-
-    // Create repo and exit if init was requested
-    if init {
-        branches::init_pageserver(conf, create_tenant).context("Failed to init pageserver")?;
-        // write the config file
-        let cfg_file_contents = toml::to_string_pretty(&params)
-            .context("Failed to create pageserver config contents for initialisation")?;
-        // TODO support enable-auth flag
-        std::fs::write(&cfg_file_path, cfg_file_contents).with_context(|| {
-            format!(
-                "Failed to initialize pageserver config at '{}'",
-                cfg_file_path.display()
-            )
-        })?;
-        Ok(())
-    } else {
-        start_pageserver(conf).context("Failed to start pageserver")
+    if arg_matches.is_present("interactive") {
+        conf.interactive = true;
     }
+
+    if conf.daemonize && conf.interactive {
+        eprintln!("--daemonize is not allowed with --interactive: choose one");
+        exit(1);
+    }
+
+    if let Some(addr) = arg_matches.value_of("listen") {
+        conf.listen_addr = addr.parse()?;
+    }
+
+    if let Some(horizon) = arg_matches.value_of("gc_horizon") {
+        conf.gc_horizon = horizon.parse()?;
+    }
+
+    if let Some(period) = arg_matches.value_of("gc_period") {
+        conf.gc_period = parse(period)?;
+    }
+
+    start_pageserver(&conf)
 }
 
-fn start_pageserver(conf: &'static PageServerConf) -> Result<()> {
+fn start_pageserver(conf: &PageServerConf) -> Result<()> {
     // Initialize logger
-    let log_file = logging::init(LOG_FILE_NAME, conf.daemonize)?;
+    let _scope_guard = init_logging(&conf)?;
+    let _log_guard = slog_stdlog::init()?;
 
-    info!("version: {}", GIT_VERSION);
+    // Note: this `info!(...)` macro comes from `log` crate
+    info!("standard logging redirected to slog");
 
-    // TODO: Check that it looks like a valid repository before going further
+    let tui_thread: Option<thread::JoinHandle<()>>;
+    if conf.interactive {
+        // Initialize the UI
+        tui_thread = Some(
+            thread::Builder::new()
+                .name("UI thread".into())
+                .spawn(|| {
+                    let _ = tui::ui_main();
+                })
+                .unwrap(),
+        );
+        //threads.push(tui_thread);
+    } else {
+        tui_thread = None;
+    }
 
-    // bind sockets before daemonizing so we report errors early and do not return until we are listening
-    info!(
-        "Starting pageserver http handler on {}",
-        conf.listen_http_addr
-    );
-    let http_listener = tcp_listener::bind(conf.listen_http_addr.clone())?;
-
-    info!(
-        "Starting pageserver pg protocol handler on {}",
-        conf.listen_pg_addr
-    );
-    let pageserver_listener = tcp_listener::bind(conf.listen_pg_addr.clone())?;
-
-    // XXX: Don't spawn any threads before daemonizing!
     if conf.daemonize {
         info!("daemonizing...");
 
-        // There shouldn't be any logging to stdin/stdout. Redirect it to the main log so
+        let repodir = zenith_repo_dir();
+
+        // There should'n be any logging to stdin/stdout. Redirect it to the main log so
         // that we will see any accidental manual fprintf's or backtraces.
-        let stdout = log_file.try_clone().unwrap();
-        let stderr = log_file;
+        let log_filename = repodir.join("pageserver.log");
+        let stdout = OpenOptions::new()
+            .create(true)
+            .append(true)
+            .open(&log_filename)
+            .with_context(|| format!("failed to open {:?}", &log_filename))?;
+        let stderr = OpenOptions::new()
+            .create(true)
+            .append(true)
+            .open(&log_filename)
+            .with_context(|| format!("failed to open {:?}", &log_filename))?;
 
         let daemonize = Daemonize::new()
-            .pid_file("pageserver.pid")
-            .working_directory(".")
+            .pid_file(repodir.join("pageserver.pid"))
+            .working_directory(repodir)
             .stdout(stdout)
             .stderr(stderr);
 
-        // XXX: The parent process should exit abruptly right after
-        // it has spawned a child to prevent coverage machinery from
-        // dumping stats into a `profraw` file now owned by the child.
-        // Otherwise, the coverage data will be damaged.
-        match daemonize.exit_action(|| exit_now(0)).start() {
+        match daemonize.start() {
             Ok(_) => info!("Success, daemonized"),
-            Err(err) => error!(%err, "could not daemonize"),
+            Err(e) => error!("Error, {}", e),
         }
+    } else {
+        // change into the repository directory. In daemon mode, Daemonize
+        // does this for us.
+        let repodir = zenith_repo_dir();
+        std::env::set_current_dir(&repodir)?;
+        info!("Changed current directory to repository in {:?}", &repodir);
     }
 
-    let signals = signals::install_shutdown_handlers()?;
-    let mut threads = vec![];
+    let mut threads = Vec::new();
 
-    if let Some(handle) = remote_storage::run_storage_sync_thread(conf)? {
-        threads.push(handle);
-    }
-    // Initialize tenant manager.
-    tenant_mgr::init(conf);
+    // TODO: Check that it looks like a valid repository before going further
 
-    // initialize authentication for incoming connections
-    let auth = match &conf.auth_type {
-        AuthType::Trust | AuthType::MD5 => None,
-        AuthType::ZenithJWT => {
-            // unwrap is ok because check is performed when creating config, so path is set and file exists
-            let key_path = conf.auth_validation_public_key_path.as_ref().unwrap();
-            Some(JwtAuth::from_key_path(key_path)?.into())
-        }
-    };
-    info!("Using auth: {:#?}", conf.auth_type);
-
-    // Spawn a new thread for the http endpoint
-    // bind before launching separate thread so the error reported before startup exits
-    let cloned = auth.clone();
-    threads.push(
-        thread::Builder::new()
-            .name("http_endpoint_thread".into())
-            .spawn(move || {
-                let router = http::make_router(conf, cloned);
-                endpoint::serve_thread_main(router, http_listener)
-            })?,
-    );
-
-    // Spawn a thread to listen for connections. It will spawn further threads
-    // for each connection.
-    threads.push(
-        thread::Builder::new()
-            .name("Page Service thread".into())
-            .spawn(move || {
-                page_service::thread_main(conf, auth, pageserver_listener, conf.auth_type)
-            })?,
-    );
-
-    signals.handle(|signal| match signal {
-        Signal::Quit => {
-            info!(
-                "Got {}. Terminating in immediate shutdown mode",
-                signal.name()
-            );
-            std::process::exit(111);
-        }
-
-        Signal::Interrupt | Signal::Terminate => {
-            info!(
-                "Got {}. Terminating gracefully in fast shutdown mode",
-                signal.name()
-            );
-
-            postgres_backend::set_pgbackend_shutdown_requested();
-            tenant_mgr::shutdown_all_tenants()?;
-            endpoint::shutdown();
-
-            for handle in std::mem::take(&mut threads) {
-                handle
-                    .join()
-                    .expect("thread panicked")
-                    .expect("thread exited with an error");
+    // Create directory for wal-redo datadirs
+    match fs::create_dir("wal-redo") {
+        Ok(_) => {}
+        Err(e) => match e.kind() {
+            io::ErrorKind::AlreadyExists => {}
+            _ => {
+                anyhow::bail!("Failed to create wal-redo data directory: {}", e);
             }
+        },
+    }
 
-            info!("Shut down successfully completed");
-            std::process::exit(0);
+    // GetPage@LSN requests are served by another thread. (It uses async I/O,
+    // but the code in page_service sets up it own thread pool for that)
+    let conf_copy = conf.clone();
+    let page_server_thread = thread::Builder::new()
+        .name("Page Service thread".into())
+        .spawn(move || {
+            // thread code
+            page_service::thread_main(&conf_copy);
+        })
+        .unwrap();
+    threads.push(page_server_thread);
+
+    if let Some(tui_thread) = tui_thread {
+        // The TUI thread exits when the user asks to Quit.
+        tui_thread.join().unwrap();
+    } else {
+        // In non-interactive mode, wait forever.
+        for t in threads {
+            t.join().unwrap()
         }
-    })
+    }
+    Ok(())
 }
 
-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    #[test]
-    fn page_server_conf_toml_serde() {
-        let params = CfgFileParams {
-            listen_pg_addr: Some("listen_pg_addr_VALUE".to_string()),
-            listen_http_addr: Some("listen_http_addr_VALUE".to_string()),
-            checkpoint_distance: Some("checkpoint_distance_VALUE".to_string()),
-            checkpoint_period: Some("checkpoint_period_VALUE".to_string()),
-            gc_horizon: Some("gc_horizon_VALUE".to_string()),
-            gc_period: Some("gc_period_VALUE".to_string()),
-            open_mem_limit: Some("open_mem_limit_VALUE".to_string()),
-            page_cache_size: Some("page_cache_size_VALUE".to_string()),
-            max_file_descriptors: Some("max_file_descriptors_VALUE".to_string()),
-            pg_distrib_dir: Some("pg_distrib_dir_VALUE".to_string()),
-            auth_validation_public_key_path: Some(
-                "auth_validation_public_key_path_VALUE".to_string(),
-            ),
-            auth_type: Some("auth_type_VALUE".to_string()),
-            remote_storage: Some(RemoteStorage::Local {
-                local_path: "remote_storage_local_VALUE".to_string(),
-            }),
-            remote_storage_max_concurrent_sync: Some(
-                "remote_storage_max_concurrent_sync_VALUE".to_string(),
-            ),
-            remote_storage_max_sync_errors: Some(
-                "remote_storage_max_sync_errors_VALUE".to_string(),
-            ),
-        };
-
-        let toml_string = toml::to_string(&params).expect("Failed to serialize correct config");
-        let toml_pretty_string =
-            toml::to_string_pretty(&params).expect("Failed to serialize correct config");
-        assert_eq!(
-            r#"listen_pg_addr = 'listen_pg_addr_VALUE'
-listen_http_addr = 'listen_http_addr_VALUE'
-checkpoint_distance = 'checkpoint_distance_VALUE'
-checkpoint_period = 'checkpoint_period_VALUE'
-gc_horizon = 'gc_horizon_VALUE'
-gc_period = 'gc_period_VALUE'
-open_mem_limit = 'open_mem_limit_VALUE'
-page_cache_size = 'page_cache_size_VALUE'
-max_file_descriptors = 'max_file_descriptors_VALUE'
-pg_distrib_dir = 'pg_distrib_dir_VALUE'
-auth_validation_public_key_path = 'auth_validation_public_key_path_VALUE'
-auth_type = 'auth_type_VALUE'
-remote_storage_max_concurrent_sync = 'remote_storage_max_concurrent_sync_VALUE'
-remote_storage_max_sync_errors = 'remote_storage_max_sync_errors_VALUE'
-
-[remote_storage]
-local_path = 'remote_storage_local_VALUE'
-"#,
-            toml_pretty_string
-        );
-
-        let params_from_serialized: CfgFileParams = toml::from_str(&toml_string)
-            .expect("Failed to deserialize the serialization result of the config");
-        let params_from_serialized_pretty: CfgFileParams = toml::from_str(&toml_pretty_string)
-            .expect("Failed to deserialize the prettified serialization result of the config");
-        assert!(
-            params_from_serialized == params,
-            "Expected the same config in the end of config -> serialize -> deserialize chain"
-        );
-        assert!(
-            params_from_serialized_pretty == params,
-            "Expected the same config in the end of config -> serialize pretty -> deserialize chain"
-        );
-    }
-
-    #[test]
-    fn credentials_omitted_during_serialization() {
-        let params = CfgFileParams {
-            listen_pg_addr: Some("listen_pg_addr_VALUE".to_string()),
-            listen_http_addr: Some("listen_http_addr_VALUE".to_string()),
-            checkpoint_distance: Some("checkpoint_distance_VALUE".to_string()),
-            checkpoint_period: Some("checkpoint_period_VALUE".to_string()),
-            gc_horizon: Some("gc_horizon_VALUE".to_string()),
-            gc_period: Some("gc_period_VALUE".to_string()),
-            open_mem_limit: Some("open_mem_limit_VALUE".to_string()),
-            page_cache_size: Some("page_cache_size_VALUE".to_string()),
-            max_file_descriptors: Some("max_file_descriptors_VALUE".to_string()),
-            pg_distrib_dir: Some("pg_distrib_dir_VALUE".to_string()),
-            auth_validation_public_key_path: Some(
-                "auth_validation_public_key_path_VALUE".to_string(),
-            ),
-            auth_type: Some("auth_type_VALUE".to_string()),
-            remote_storage: Some(RemoteStorage::AwsS3 {
-                bucket_name: "bucket_name_VALUE".to_string(),
-                bucket_region: "bucket_region_VALUE".to_string(),
-                access_key_id: Some("access_key_id_VALUE".to_string()),
-                secret_access_key: Some("secret_access_key_VALUE".to_string()),
-            }),
-            remote_storage_max_concurrent_sync: Some(
-                "remote_storage_max_concurrent_sync_VALUE".to_string(),
-            ),
-            remote_storage_max_sync_errors: Some(
-                "remote_storage_max_sync_errors_VALUE".to_string(),
-            ),
-        };
-
-        let toml_string = toml::to_string(&params).expect("Failed to serialize correct config");
-        let toml_pretty_string =
-            toml::to_string_pretty(&params).expect("Failed to serialize correct config");
-        assert_eq!(
-            r#"listen_pg_addr = 'listen_pg_addr_VALUE'
-listen_http_addr = 'listen_http_addr_VALUE'
-checkpoint_distance = 'checkpoint_distance_VALUE'
-checkpoint_period = 'checkpoint_period_VALUE'
-gc_horizon = 'gc_horizon_VALUE'
-gc_period = 'gc_period_VALUE'
-open_mem_limit = 'open_mem_limit_VALUE'
-page_cache_size = 'page_cache_size_VALUE'
-max_file_descriptors = 'max_file_descriptors_VALUE'
-pg_distrib_dir = 'pg_distrib_dir_VALUE'
-auth_validation_public_key_path = 'auth_validation_public_key_path_VALUE'
-auth_type = 'auth_type_VALUE'
-remote_storage_max_concurrent_sync = 'remote_storage_max_concurrent_sync_VALUE'
-remote_storage_max_sync_errors = 'remote_storage_max_sync_errors_VALUE'
-
-[remote_storage]
-bucket_name = 'bucket_name_VALUE'
-bucket_region = 'bucket_region_VALUE'
-"#,
-            toml_pretty_string
-        );
-
-        let params_from_serialized: CfgFileParams = toml::from_str(&toml_string)
-            .expect("Failed to deserialize the serialization result of the config");
-        let params_from_serialized_pretty: CfgFileParams = toml::from_str(&toml_pretty_string)
-            .expect("Failed to deserialize the prettified serialization result of the config");
-
-        let mut expected_params = params;
-        expected_params.remote_storage = Some(RemoteStorage::AwsS3 {
-            bucket_name: "bucket_name_VALUE".to_string(),
-            bucket_region: "bucket_region_VALUE".to_string(),
-            access_key_id: None,
-            secret_access_key: None,
+fn init_logging(conf: &PageServerConf) -> Result<slog_scope::GlobalLoggerGuard, io::Error> {
+    if conf.interactive {
+        Ok(tui::init_logging())
+    } else if conf.daemonize {
+        let log = zenith_repo_dir().join("pageserver.log");
+        let log_file = OpenOptions::new()
+            .create(true)
+            .append(true)
+            .open(&log)
+            .map_err(|err| {
+                // We failed to initialize logging, so we can't log this message with error!
+                eprintln!("Could not create log file {:?}: {}", log, err);
+                err
+            })?;
+        let decorator = slog_term::PlainSyncDecorator::new(log_file);
+        let drain = slog_term::CompactFormat::new(decorator).build();
+        let drain = slog::Filter::new(drain, |record: &slog::Record| {
+            if record.level().is_at_least(slog::Level::Info) {
+                return true;
+            }
+            false
         });
-        assert!(
-            params_from_serialized == expected_params,
-            "Expected the config without credentials in the end of a 'config -> serialize -> deserialize' chain"
-        );
-        assert!(
-            params_from_serialized_pretty == expected_params,
-            "Expected the config without credentials in the end of a 'config -> serialize pretty -> deserialize' chain"
-        );
+        let drain = std::sync::Mutex::new(drain).fuse();
+        let logger = slog::Logger::root(drain, slog::o!());
+        Ok(slog_scope::set_global_logger(logger))
+    } else {
+        let decorator = slog_term::TermDecorator::new().build();
+        let drain = slog_term::FullFormat::new(decorator).build().fuse();
+        let drain = slog_async::Async::new(drain).chan_size(1000).build().fuse();
+        let drain = slog::Filter::new(drain, |record: &slog::Record| {
+            if record.level().is_at_least(slog::Level::Info) {
+                return true;
+            }
+            if record.level().is_at_least(slog::Level::Debug)
+                && record.module().starts_with("pageserver")
+            {
+                return true;
+            }
+            false
+        })
+        .fuse();
+        let logger = slog::Logger::root(drain, slog::o!());
+        Ok(slog_scope::set_global_logger(logger))
     }
 }

pageserver/src/branches.rs

@@ -1,419 +0,0 @@
-//!
-//! Branch management code
-//!
-// TODO: move all paths construction to conf impl
-//
-
-use anyhow::{bail, Context, Result};
-use postgres_ffi::ControlFileData;
-use serde::{Deserialize, Serialize};
-use std::{
-    fs,
-    path::Path,
-    process::{Command, Stdio},
-    str::FromStr,
-    sync::Arc,
-};
-use tracing::*;
-
-use zenith_utils::crashsafe_dir;
-use zenith_utils::logging;
-use zenith_utils::lsn::Lsn;
-use zenith_utils::zid::{ZTenantId, ZTimelineId};
-
-use crate::tenant_mgr;
-use crate::walredo::WalRedoManager;
-use crate::CheckpointConfig;
-use crate::{repository::Repository, PageServerConf};
-use crate::{restore_local_repo, LOG_FILE_NAME};
-
-#[derive(Serialize, Deserialize, Clone)]
-pub struct BranchInfo {
-    pub name: String,
-    #[serde(with = "hex")]
-    pub timeline_id: ZTimelineId,
-    pub latest_valid_lsn: Lsn,
-    pub ancestor_id: Option<String>,
-    pub ancestor_lsn: Option<String>,
-    pub current_logical_size: usize,
-    pub current_logical_size_non_incremental: Option<usize>,
-}
-
-impl BranchInfo {
-    pub fn from_path<T: AsRef<Path>>(
-        path: T,
-        repo: &Arc<dyn Repository>,
-        include_non_incremental_logical_size: bool,
-    ) -> Result<Self> {
-        let name = path
-            .as_ref()
-            .file_name()
-            .unwrap()
-            .to_str()
-            .unwrap()
-            .to_string();
-        let timeline_id = std::fs::read_to_string(path)?.parse::<ZTimelineId>()?;
-
-        let timeline = repo.get_timeline(timeline_id)?;
-
-        // we use ancestor lsn zero if we don't have an ancestor, so turn this into an option based on timeline id
-        let (ancestor_id, ancestor_lsn) = match timeline.get_ancestor_timeline_id() {
-            Some(ancestor_id) => (
-                Some(ancestor_id.to_string()),
-                Some(timeline.get_ancestor_lsn().to_string()),
-            ),
-            None => (None, None),
-        };
-
-        // non incremental size calculation can be heavy, so let it be optional
-        // needed for tests to check size calculation
-        let current_logical_size_non_incremental = include_non_incremental_logical_size
-            .then(|| {
-                timeline.get_current_logical_size_non_incremental(timeline.get_last_record_lsn())
-            })
-            .transpose()?;
-
-        Ok(BranchInfo {
-            name,
-            timeline_id,
-            latest_valid_lsn: timeline.get_last_record_lsn(),
-            ancestor_id,
-            ancestor_lsn,
-            current_logical_size: timeline.get_current_logical_size(),
-            current_logical_size_non_incremental,
-        })
-    }
-}
-
-#[derive(Debug, Clone, Copy)]
-pub struct PointInTime {
-    pub timelineid: ZTimelineId,
-    pub lsn: Lsn,
-}
-
-pub fn init_pageserver(conf: &'static PageServerConf, create_tenant: Option<&str>) -> Result<()> {
-    // Initialize logger
-    // use true as daemonize parameter because otherwise we pollute zenith cli output with a few pages long output of info messages
-    let _log_file = logging::init(LOG_FILE_NAME, true)?;
-
-    // We don't use the real WAL redo manager, because we don't want to spawn the WAL redo
-    // process during repository initialization.
-    //
-    // FIXME: That caused trouble, because the WAL redo manager spawned a thread that launched
-    // initdb in the background, and it kept running even after the "zenith init" had exited.
-    // In tests, we started the  page server immediately after that, so that initdb was still
-    // running in the background, and we failed to run initdb again in the same directory. This
-    // has been solved for the rapid init+start case now, but the general race condition remains
-    // if you restart the server quickly. The WAL redo manager doesn't use a separate thread
-    // anymore, but I think that could still happen.
-    let dummy_redo_mgr = Arc::new(crate::walredo::DummyRedoManager {});
-
-    if let Some(tenantid) = create_tenant {
-        let tenantid = ZTenantId::from_str(tenantid)?;
-        println!("initializing tenantid {}", tenantid);
-        create_repo(conf, tenantid, dummy_redo_mgr).with_context(|| "failed to create repo")?;
-    }
-    crashsafe_dir::create_dir_all(conf.tenants_path())?;
-
-    println!("pageserver init succeeded");
-    Ok(())
-}
-
-pub fn create_repo(
-    conf: &'static PageServerConf,
-    tenantid: ZTenantId,
-    wal_redo_manager: Arc<dyn WalRedoManager + Send + Sync>,
-) -> Result<Arc<dyn Repository>> {
-    let repo_dir = conf.tenant_path(&tenantid);
-    if repo_dir.exists() {
-        bail!("repo for {} already exists", tenantid)
-    }
-
-    // top-level dir may exist if we are creating it through CLI
-    crashsafe_dir::create_dir_all(&repo_dir)
-        .with_context(|| format!("could not create directory {}", repo_dir.display()))?;
-
-    crashsafe_dir::create_dir(conf.timelines_path(&tenantid))?;
-    crashsafe_dir::create_dir_all(conf.branches_path(&tenantid))?;
-    crashsafe_dir::create_dir_all(conf.tags_path(&tenantid))?;
-
-    info!("created directory structure in {}", repo_dir.display());
-
-    // create a new timeline directory
-    let timeline_id = ZTimelineId::generate();
-    let timelinedir = conf.timeline_path(&timeline_id, &tenantid);
-
-    crashsafe_dir::create_dir(&timelinedir)?;
-
-    let repo = Arc::new(crate::layered_repository::LayeredRepository::new(
-        conf,
-        wal_redo_manager,
-        tenantid,
-        false,
-    ));
-
-    // Load data into pageserver
-    // TODO To implement zenith import we need to
-    //      move data loading out of create_repo()
-    bootstrap_timeline(conf, tenantid, timeline_id, repo.as_ref())?;
-
-    Ok(repo)
-}
-
-// Returns checkpoint LSN from controlfile
-fn get_lsn_from_controlfile(path: &Path) -> Result<Lsn> {
-    // Read control file to extract the LSN
-    let controlfile_path = path.join("global").join("pg_control");
-    let controlfile = ControlFileData::decode(&fs::read(controlfile_path)?)?;
-    let lsn = controlfile.checkPoint;
-
-    Ok(Lsn(lsn))
-}
-
-// Create the cluster temporarily in 'initdbpath' directory inside the repository
-// to get bootstrap data for timeline initialization.
-//
-fn run_initdb(conf: &'static PageServerConf, initdbpath: &Path) -> Result<()> {
-    info!("running initdb in {}... ", initdbpath.display());
-
-    let initdb_path = conf.pg_bin_dir().join("initdb");
-    let initdb_output = Command::new(initdb_path)
-        .args(&["-D", initdbpath.to_str().unwrap()])
-        .args(&["-U", &conf.superuser])
-        .arg("--no-instructions")
-        // This is only used for a temporary installation that is deleted shortly after,
-        // so no need to fsync it
-        .arg("--no-sync")
-        .env_clear()
-        .env("LD_LIBRARY_PATH", conf.pg_lib_dir().to_str().unwrap())
-        .env("DYLD_LIBRARY_PATH", conf.pg_lib_dir().to_str().unwrap())
-        .stdout(Stdio::null())
-        .output()
-        .with_context(|| "failed to execute initdb")?;
-    if !initdb_output.status.success() {
-        anyhow::bail!(
-            "initdb failed: '{}'",
-            String::from_utf8_lossy(&initdb_output.stderr)
-        );
-    }
-
-    Ok(())
-}
-
-//
-// - run initdb to init temporary instance and get bootstrap data
-// - after initialization complete, remove the temp dir.
-//
-fn bootstrap_timeline(
-    conf: &'static PageServerConf,
-    tenantid: ZTenantId,
-    tli: ZTimelineId,
-    repo: &dyn Repository,
-) -> Result<()> {
-    let _enter = info_span!("bootstrapping", timeline = %tli, tenant = %tenantid).entered();
-
-    let initdb_path = conf.tenant_path(&tenantid).join("tmp");
-
-    // Init temporarily repo to get bootstrap data
-    run_initdb(conf, &initdb_path)?;
-    let pgdata_path = initdb_path;
-
-    let lsn = get_lsn_from_controlfile(&pgdata_path)?.align();
-
-    // Import the contents of the data directory at the initial checkpoint
-    // LSN, and any WAL after that.
-    // Initdb lsn will be equal to last_record_lsn which will be set after import.
-    // Because we know it upfront avoid having an option or dummy zero value by passing it to create_empty_timeline.
-    let timeline = repo.create_empty_timeline(tli, lsn)?;
-    restore_local_repo::import_timeline_from_postgres_datadir(
-        &pgdata_path,
-        timeline.writer().as_ref(),
-        lsn,
-    )?;
-    timeline.checkpoint(CheckpointConfig::Forced)?;
-
-    println!(
-        "created initial timeline {} timeline.lsn {}",
-        tli,
-        timeline.get_last_record_lsn()
-    );
-
-    let data = tli.to_string();
-    fs::write(conf.branch_path("main", &tenantid), data)?;
-    println!("created main branch");
-
-    // Remove temp dir. We don't need it anymore
-    fs::remove_dir_all(pgdata_path)?;
-
-    Ok(())
-}
-
-pub(crate) fn get_branches(
-    conf: &PageServerConf,
-    tenantid: &ZTenantId,
-    include_non_incremental_logical_size: bool,
-) -> Result<Vec<BranchInfo>> {
-    let repo = tenant_mgr::get_repository_for_tenant(*tenantid)?;
-
-    // Each branch has a corresponding record (text file) in the refs/branches
-    // with timeline_id.
-    let branches_dir = conf.branches_path(tenantid);
-
-    std::fs::read_dir(&branches_dir)
-        .with_context(|| {
-            format!(
-                "Found no branches directory '{}' for tenant {}",
-                branches_dir.display(),
-                tenantid
-            )
-        })?
-        .map(|dir_entry_res| {
-            let dir_entry = dir_entry_res.with_context(|| {
-                format!(
-                    "Failed to list branches directory '{}' content for tenant {}",
-                    branches_dir.display(),
-                    tenantid
-                )
-            })?;
-            BranchInfo::from_path(
-                dir_entry.path(),
-                &repo,
-                include_non_incremental_logical_size,
-            )
-        })
-        .collect()
-}
-
-pub(crate) fn create_branch(
-    conf: &PageServerConf,
-    branchname: &str,
-    startpoint_str: &str,
-    tenantid: &ZTenantId,
-) -> Result<BranchInfo> {
-    let repo = tenant_mgr::get_repository_for_tenant(*tenantid)?;
-
-    if conf.branch_path(branchname, tenantid).exists() {
-        anyhow::bail!("branch {} already exists", branchname);
-    }
-
-    let mut startpoint = parse_point_in_time(conf, startpoint_str, tenantid)?;
-    let timeline = repo.get_timeline(startpoint.timelineid)?;
-    if startpoint.lsn == Lsn(0) {
-        // Find end of WAL on the old timeline
-        let end_of_wal = timeline.get_last_record_lsn();
-        info!("branching at end of WAL: {}", end_of_wal);
-        startpoint.lsn = end_of_wal;
-    } else {
-        // Wait for the WAL to arrive and be processed on the parent branch up
-        // to the requested branch point. The repository code itself doesn't
-        // require it, but if we start to receive WAL on the new timeline,
-        // decoding the new WAL might need to look up previous pages, relation
-        // sizes etc. and that would get confused if the previous page versions
-        // are not in the repository yet.
-        timeline.wait_lsn(startpoint.lsn)?;
-    }
-    startpoint.lsn = startpoint.lsn.align();
-    if timeline.get_start_lsn() > startpoint.lsn {
-        anyhow::bail!(
-            "invalid startpoint {} for the branch {}: less than timeline start {}",
-            startpoint.lsn,
-            branchname,
-            timeline.get_start_lsn()
-        );
-    }
-
-    let new_timeline_id = ZTimelineId::generate();
-
-    // Forward entire timeline creation routine to repository
-    // backend, so it can do all needed initialization
-    repo.branch_timeline(startpoint.timelineid, new_timeline_id, startpoint.lsn)?;
-
-    // Remember the human-readable branch name for the new timeline.
-    // FIXME: there's a race condition, if you create a branch with the same
-    // name concurrently.
-    let data = new_timeline_id.to_string();
-    fs::write(conf.branch_path(branchname, tenantid), data)?;
-
-    Ok(BranchInfo {
-        name: branchname.to_string(),
-        timeline_id: new_timeline_id,
-        latest_valid_lsn: startpoint.lsn,
-        ancestor_id: Some(startpoint.timelineid.to_string()),
-        ancestor_lsn: Some(startpoint.lsn.to_string()),
-        current_logical_size: 0,
-        current_logical_size_non_incremental: Some(0),
-    })
-}
-
-//
-// Parse user-given string that represents a point-in-time.
-//
-// We support multiple variants:
-//
-// Raw timeline id in hex, meaning the end of that timeline:
-//    bc62e7d612d0e6fe8f99a6dd2f281f9d
-//
-// A specific LSN on a timeline:
-//    bc62e7d612d0e6fe8f99a6dd2f281f9d@2/15D3DD8
-//
-// Same, with a human-friendly branch name:
-//    main
-//    main@2/15D3DD8
-//
-// Human-friendly tag name:
-//    mytag
-//
-//
-fn parse_point_in_time(
-    conf: &PageServerConf,
-    s: &str,
-    tenantid: &ZTenantId,
-) -> Result<PointInTime> {
-    let mut strings = s.split('@');
-    let name = strings.next().unwrap();
-
-    let lsn: Option<Lsn>;
-    if let Some(lsnstr) = strings.next() {
-        lsn = Some(
-            Lsn::from_str(lsnstr).with_context(|| "invalid LSN in point-in-time specification")?,
-        );
-    } else {
-        lsn = None
-    }
-
-    // Check if it's a tag
-    if lsn.is_none() {
-        let tagpath = conf.tag_path(name, tenantid);
-        if tagpath.exists() {
-            let pointstr = fs::read_to_string(tagpath)?;
-
-            return parse_point_in_time(conf, &pointstr, tenantid);
-        }
-    }
-
-    // Check if it's a branch
-    // Check if it's branch @ LSN
-    let branchpath = conf.branch_path(name, tenantid);
-    if branchpath.exists() {
-        let pointstr = fs::read_to_string(branchpath)?;
-
-        let mut result = parse_point_in_time(conf, &pointstr, tenantid)?;
-
-        result.lsn = lsn.unwrap_or(Lsn(0));
-        return Ok(result);
-    }
-
-    // Check if it's a timelineid
-    // Check if it's timelineid @ LSN
-    if let Ok(timelineid) = ZTimelineId::from_str(name) {
-        let tlipath = conf.timeline_path(&timelineid, tenantid);
-        if tlipath.exists() {
-            return Ok(PointInTime {
-                timelineid,
-                lsn: lsn.unwrap_or(Lsn(0)),
-            });
-        }
-    }
-
-    bail!("could not parse point-in-time {}", s);
-}

pageserver/src/http/mod.rs

@@ -1,3 +0,0 @@
-pub mod models;
-pub mod routes;
-pub use routes::make_router;

pageserver/src/http/models.rs

@@ -1,17 +0,0 @@
-use serde::{Deserialize, Serialize};
-
-use crate::ZTenantId;
-
-#[derive(Serialize, Deserialize)]
-pub struct BranchCreateRequest {
-    #[serde(with = "hex")]
-    pub tenant_id: ZTenantId,
-    pub name: String,
-    pub start_point: String,
-}
-
-#[derive(Serialize, Deserialize)]
-pub struct TenantCreateRequest {
-    #[serde(with = "hex")]
-    pub tenant_id: ZTenantId,
-}

pageserver/src/http/openapi_spec.yml

@@ -1,310 +0,0 @@
-openapi: "3.0.2"
-info:
-  title: Page Server API
-  version: "1.0"
-servers:
-  - url: ""
-paths:
-  /v1/status:
-    description: Healthcheck endpoint
-    get:
-      description: Healthcheck
-      security: []
-      responses:
-        "200":
-          description: OK
-          content:
-            application/json:
-              schema:
-                type: object
-  /v1/branch/{tenant_id}:
-    parameters:
-      - name: tenant_id
-        in: path
-        required: true
-        schema:
-          type: string
-          format: hex
-      - name: include-non-incremental-logical-size
-        in: query
-        schema:
-          type: string
-          description: Controls calculation of current_logical_size_non_incremental
-    get:
-      description: Get branches for tenant
-      responses:
-        "200":
-          description: BranchInfo
-          content:
-            application/json:
-              schema:
-                type: array
-                items:
-                  $ref: "#/components/schemas/BranchInfo"
-        "400":
-          description: Error when no tenant id found in path
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-        "401":
-          description: Unauthorized Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/UnauthorizedError"
-        "403":
-          description: Forbidden Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ForbiddenError"
-        "500":
-          description: Generic operation error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-  /v1/branch/{tenant_id}/{branch_name}:
-    parameters:
-      - name: tenant_id
-        in: path
-        required: true
-        schema:
-          type: string
-          format: hex
-      - name: branch_name
-        in: path
-        required: true
-        schema:
-          type: string
-      - name: include-non-incremental-logical-size
-        in: query
-        schema:
-          type: string
-          description: Controls calculation of current_logical_size_non_incremental
-    get:
-      description: Get branches for tenant
-      responses:
-        "200":
-          description: BranchInfo
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/BranchInfo"
-        "400":
-          description: Error when no tenant id found in path or no branch name
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-        "401":
-          description: Unauthorized Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/UnauthorizedError"
-        "403":
-          description: Forbidden Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ForbiddenError"
-        "500":
-          description: Generic operation error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-  /v1/branch/:
-    post:
-      description: Create branch
-      requestBody:
-        content:
-          application/json:
-            schema:
-              type: object
-              required:
-                - "tenant_id"
-                - "name"
-                - "start_point"
-              properties:
-                tenant_id:
-                  type: string
-                  format: hex
-                name:
-                  type: string
-                start_point:
-                  type: string
-      responses:
-        "201":
-          description: BranchInfo
-          content:
-            application/json:
-              schema:
-                type: array
-                items:
-                  $ref: "#/components/schemas/BranchInfo"
-        "400":
-          description: Malformed branch create request
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-        "401":
-          description: Unauthorized Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/UnauthorizedError"
-        "403":
-          description: Forbidden Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ForbiddenError"
-        "500":
-          description: Generic operation error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-  /v1/tenant/:
-    get:
-      description: Get tenants list
-      responses:
-        "200":
-          description: TenantInfo
-          content:
-            application/json:
-              schema:
-                type: array
-                items:
-                  $ref: "#/components/schemas/TenantInfo"
-        "401":
-          description: Unauthorized Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/UnauthorizedError"
-        "403":
-          description: Forbidden Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ForbiddenError"
-        "500":
-          description: Generic operation error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-    post:
-      description: Create tenant
-      requestBody:
-        content:
-          application/json:
-            schema:
-              type: object
-              required:
-                - "tenant_id"
-              properties:
-                tenant_id:
-                  type: string
-                  format: hex
-      responses:
-        "201":
-          description: CREATED
-          content:
-            application/json:
-              schema:
-                type: array
-                items:
-                  type: string
-        "400":
-          description: Malformed tenant create request
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-        "401":
-          description: Unauthorized Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/UnauthorizedError"
-        "403":
-          description: Forbidden Error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/ForbiddenError"
-        "500":
-          description: Generic operation error
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/Error"
-
-components:
-  securitySchemes:
-    JWT:
-      type: http
-      scheme: bearer
-      bearerFormat: JWT
-  schemas:
-    TenantInfo:
-      type: object
-      required:
-        - id
-        - state
-      properties:
-        id:
-          type: string
-        state:
-          type: string
-    BranchInfo:
-      type: object
-      required:
-        - name
-        - timeline_id
-        - latest_valid_lsn
-        - current_logical_size
-      properties:
-        name:
-          type: string
-        timeline_id:
-          type: string
-          format: hex
-        ancestor_id:
-          type: string
-        ancestor_lsn:
-          type: string
-        current_logical_size:
-          type: integer
-        current_logical_size_non_incremental:
-          type: integer
-    Error:
-      type: object
-      required:
-        - msg
-      properties:
-        msg:
-          type: string
-    UnauthorizedError:
-      type: object
-      required:
-        - msg
-      properties:
-        msg:
-          type: string
-    ForbiddenError:
-      type: object
-      required:
-        - msg
-      properties:
-        msg:
-          type: string
-
-security:
-  - JWT: []

pageserver/src/http/routes.rs

@@ -1,205 +0,0 @@
-use std::sync::Arc;
-
-use anyhow::Result;
-use hyper::header;
-use hyper::StatusCode;
-use hyper::{Body, Request, Response, Uri};
-use routerify::{ext::RequestExt, RouterBuilder};
-use tracing::*;
-use zenith_utils::auth::JwtAuth;
-use zenith_utils::http::endpoint::attach_openapi_ui;
-use zenith_utils::http::endpoint::auth_middleware;
-use zenith_utils::http::endpoint::check_permission;
-use zenith_utils::http::error::ApiError;
-use zenith_utils::http::{
-    endpoint,
-    error::HttpErrorBody,
-    json::{json_request, json_response},
-    request::get_request_param,
-    request::parse_request_param,
-};
-
-use super::models::BranchCreateRequest;
-use super::models::TenantCreateRequest;
-use crate::branches::BranchInfo;
-use crate::{branches, tenant_mgr, PageServerConf, ZTenantId};
-
-#[derive(Debug)]
-struct State {
-    conf: &'static PageServerConf,
-    auth: Option<Arc<JwtAuth>>,
-    allowlist_routes: Vec<Uri>,
-}
-
-impl State {
-    fn new(conf: &'static PageServerConf, auth: Option<Arc<JwtAuth>>) -> Self {
-        let allowlist_routes = ["/v1/status", "/v1/doc", "/swagger.yml"]
-            .iter()
-            .map(|v| v.parse().unwrap())
-            .collect::<Vec<_>>();
-        Self {
-            conf,
-            auth,
-            allowlist_routes,
-        }
-    }
-}
-
-#[inline(always)]
-fn get_state(request: &Request<Body>) -> &State {
-    request
-        .data::<Arc<State>>()
-        .expect("unknown state type")
-        .as_ref()
-}
-
-#[inline(always)]
-fn get_config(request: &Request<Body>) -> &'static PageServerConf {
-    get_state(request).conf
-}
-
-// healthcheck handler
-async fn status_handler(_: Request<Body>) -> Result<Response<Body>, ApiError> {
-    Ok(Response::builder()
-        .status(StatusCode::OK)
-        .header(header::CONTENT_TYPE, "application/json")
-        .body(Body::from("{}"))
-        .map_err(ApiError::from_err)?)
-}
-
-async fn branch_create_handler(mut request: Request<Body>) -> Result<Response<Body>, ApiError> {
-    let request_data: BranchCreateRequest = json_request(&mut request).await?;
-
-    check_permission(&request, Some(request_data.tenant_id))?;
-
-    let response_data = tokio::task::spawn_blocking(move || {
-        let _enter = info_span!("/branch_create", name = %request_data.name, tenant = %request_data.tenant_id, startpoint=%request_data.start_point).entered();
-        branches::create_branch(
-            get_config(&request),
-            &request_data.name,
-            &request_data.start_point,
-            &request_data.tenant_id,
-        )
-    })
-    .await
-    .map_err(ApiError::from_err)??;
-    Ok(json_response(StatusCode::CREATED, response_data)?)
-}
-
-// Gate non incremental logical size calculation behind a flag
-// after pgbench -i -s100 calculation took 28ms so if multiplied by the number of timelines
-// and tenants it can take noticeable amount of time. Also the value currently used only in tests
-fn get_include_non_incremental_logical_size(request: &Request<Body>) -> bool {
-    request
-        .uri()
-        .query()
-        .map(|v| {
-            url::form_urlencoded::parse(v.as_bytes())
-                .into_owned()
-                .any(|(param, _)| param == "include-non-incremental-logical-size")
-        })
-        .unwrap_or(false)
-}
-
-async fn branch_list_handler(request: Request<Body>) -> Result<Response<Body>, ApiError> {
-    let tenantid: ZTenantId = parse_request_param(&request, "tenant_id")?;
-
-    let include_non_incremental_logical_size = get_include_non_incremental_logical_size(&request);
-
-    check_permission(&request, Some(tenantid))?;
-
-    let response_data = tokio::task::spawn_blocking(move || {
-        let _enter = info_span!("branch_list", tenant = %tenantid).entered();
-        crate::branches::get_branches(
-            get_config(&request),
-            &tenantid,
-            include_non_incremental_logical_size,
-        )
-    })
-    .await
-    .map_err(ApiError::from_err)??;
-    Ok(json_response(StatusCode::OK, response_data)?)
-}
-
-async fn branch_detail_handler(request: Request<Body>) -> Result<Response<Body>, ApiError> {
-    let tenantid: ZTenantId = parse_request_param(&request, "tenant_id")?;
-    let branch_name: String = get_request_param(&request, "branch_name")?.to_string();
-    let conf = get_state(&request).conf;
-    let path = conf.branch_path(&branch_name, &tenantid);
-
-    let include_non_incremental_logical_size = get_include_non_incremental_logical_size(&request);
-
-    let response_data = tokio::task::spawn_blocking(move || {
-        let _enter = info_span!("branch_detail", tenant = %tenantid, branch=%branch_name).entered();
-        let repo = tenant_mgr::get_repository_for_tenant(tenantid)?;
-        BranchInfo::from_path(path, &repo, include_non_incremental_logical_size)
-    })
-    .await
-    .map_err(ApiError::from_err)??;
-
-    Ok(json_response(StatusCode::OK, response_data)?)
-}
-
-async fn tenant_list_handler(request: Request<Body>) -> Result<Response<Body>, ApiError> {
-    // check for management permission
-    check_permission(&request, None)?;
-
-    let response_data = tokio::task::spawn_blocking(move || {
-        let _enter = info_span!("tenant_list").entered();
-        crate::tenant_mgr::list_tenants()
-    })
-    .await
-    .map_err(ApiError::from_err)??;
-
-    Ok(json_response(StatusCode::OK, response_data)?)
-}
-
-async fn tenant_create_handler(mut request: Request<Body>) -> Result<Response<Body>, ApiError> {
-    // check for management permission
-    check_permission(&request, None)?;
-
-    let request_data: TenantCreateRequest = json_request(&mut request).await?;
-
-    let response_data = tokio::task::spawn_blocking(move || {
-        let _enter = info_span!("tenant_create", tenant = %request_data.tenant_id).entered();
-        tenant_mgr::create_repository_for_tenant(get_config(&request), request_data.tenant_id)
-    })
-    .await
-    .map_err(ApiError::from_err)??;
-    Ok(json_response(StatusCode::CREATED, response_data)?)
-}
-
-async fn handler_404(_: Request<Body>) -> Result<Response<Body>, ApiError> {
-    json_response(
-        StatusCode::NOT_FOUND,
-        HttpErrorBody::from_msg("page not found".to_owned()),
-    )
-}
-
-pub fn make_router(
-    conf: &'static PageServerConf,
-    auth: Option<Arc<JwtAuth>>,
-) -> RouterBuilder<hyper::Body, ApiError> {
-    let spec = include_bytes!("openapi_spec.yml");
-    let mut router = attach_openapi_ui(endpoint::make_router(), spec, "/swagger.yml", "/v1/doc");
-    if auth.is_some() {
-        router = router.middleware(auth_middleware(|request| {
-            let state = get_state(request);
-            if state.allowlist_routes.contains(request.uri()) {
-                None
-            } else {
-                state.auth.as_deref()
-            }
-        }))
-    }
-
-    router
-        .data(Arc::new(State::new(conf, auth)))
-        .get("/v1/status", status_handler)
-        .get("/v1/branch/:tenant_id", branch_list_handler)
-        .get("/v1/branch/:tenant_id/:branch_name", branch_detail_handler)
-        .post("/v1/branch", branch_create_handler)
-        .get("/v1/tenant", tenant_list_handler)
-        .post("/v1/tenant", tenant_create_handler)
-        .any(handler_404)
-}

pageserver/src/layered_repository/README.md

@@ -1,489 +0,0 @@
-# Overview
-
-The on-disk format is based on immutable files. The page server receives a
-stream of incoming WAL, parses the WAL records to determine which pages they
-apply to, and accumulates the incoming changes in memory. Every now and then,
-the accumulated changes are written out to new immutable files. This process is
-called checkpointing. Old versions of on-disk files that are not needed by any
-timeline are removed by GC process.
-
-The main responsibility of the Page Server is to process the incoming WAL, and
-reprocess it into a format that allows reasonably quick access to any page
-version.
-
-The incoming WAL contains updates to arbitrary pages in the system. The
-distribution depends on the workload: the updates could be totally random, or
-there could be a long stream of updates to a single relation when data is bulk
-loaded, for example, or something in between. The page server slices the
-incoming WAL per relation and page, and packages the sliced WAL into
-suitably-sized "layer files". The layer files contain all the history of the
-database, back to some reasonable retention period. This system replaces the
-base backups and the WAL archive used in a traditional PostgreSQL
-installation. The layer files are immutable, they are not modified in-place
-after creation. New layer files are created for new incoming WAL, and old layer
-files are removed when they are no longer needed. We could also replace layer
-files with new files that contain the same information, merging small files for
-example, but that hasn't been implemented yet.
-
-
-Cloud Storage                   Page Server                   Safekeeper
-                     Local disk                Memory            WAL
-
-|AAAA|               |AAAA|AAAA|               |AA
-|BBBB|               |BBBB|BBBB|               |
-|CCCC|CCCC|  <----   |CCCC|CCCC|CCCC|   <---   |CC     <----   ADEBAABED
-|DDDD|DDDD|          |DDDD|DDDD|               |DDD
-|EEEE|               |EEEE|EEEE|EEEE|          |E
-
-
-In this illustration, WAL is received as a stream from the Safekeeper, from the
-right.  It is immediately captured by the page server and stored quickly in
-memory. The page server memory can be thought of as a quick "reorder buffer",
-used to hold the incoming WAL and reorder it so that we keep the WAL records for
-the same page and relation close to each other.
-
-From the page server memory, whenever enough WAL has been accumulated for one
-relation segment, it is moved to local disk, as a new layer file, and the memory
-is released.
-
-From the local disk, the layers are further copied to Cloud Storage, for
-long-term archival. After a layer has been copied to Cloud Storage, it can be
-removed from local disk, although we currently keep everything locally for fast
-access. If a layer is needed that isn't found locally, it is fetched from Cloud
-Storage and stored in local disk.
-
-# Terms used in layered repository
-
-- Relish - one PostgreSQL relation or similarly treated file.
-- Segment - one slice of a Relish that is stored in a LayeredTimeline.
-- Layer -  specific version of a relish Segment in a range of LSNs.
-
-# Layer map
-
-The LayerMap tracks what layers exist for all the relishes in a timeline.
-
-LayerMap consists of two data structures:
-- segs - All the layers keyed by segment tag
-- open_layers - data structure that hold all open layers ordered by oldest_pending_lsn for quick access during checkpointing. oldest_pending_lsn is the LSN of the oldest page version stored in this layer.
-
-All operations that update InMemory Layers should update both structures to keep them up-to-date.
-
-- LayeredTimeline - implements Timeline interface.
-
-All methods of LayeredTimeline are aware of its ancestors and return data taking them into account.
-TODO: Are there any exceptions to this?
-For example, timeline.list_rels(lsn) will return all segments that are visible in this timeline at the LSN,
-including ones that were not modified in this timeline and thus don't have a layer in the timeline's LayerMap.
-
-
-# Different kinds of layers
-
-A layer can be in different states:
-
-- Open - a layer where new WAL records can be appended to.
-- Closed - a layer that is read-only, no new WAL records can be appended to it
-- Historic: synonym for closed
-- InMemory: A layer that needs to be rebuilt from WAL on pageserver start.
-To avoid OOM errors, InMemory layers can be spilled to disk into ephemeral file.
-- OnDisk: A layer that is stored on disk. If its end-LSN is older than
-  disk_consistent_lsn, it is known to be fully flushed and fsync'd to local disk.
-- Frozen layer: an in-memory layer that is Closed.
-
-TODO: Clarify the difference between Closed, Historic and Frozen.
-
-There are two kinds of OnDisk layers:
-- ImageLayer represents an image or a snapshot of a 10 MB relish segment, at one particular LSN.
-- DeltaLayer represents a collection of WAL records or page images in a range of LSNs, for one
-  relish segment.
-
-Dropped segments are always represented on disk by DeltaLayer.
-
-# Layer life cycle
-
-LSN range defined by start_lsn and end_lsn:
-- start_lsn is inclusive.
-- end_lsn is exclusive.
-
-For an open in-memory layer, the end_lsn is MAX_LSN. For a frozen in-memory
-layer or a delta layer, it is a valid end bound. An image layer represents
-snapshot at one LSN, so end_lsn is always the snapshot LSN + 1
-
-Every layer starts its life as an Open In-Memory layer. When the page server
-receives the first WAL record for a segment, it creates a new In-Memory layer
-for it, and puts it to the layer map. Later, the layer is old enough, its
-contents are written to disk, as On-Disk layers. This process is called
-"evicting" a layer.
-
-Layer eviction is a two-step process: First, the layer is marked as closed, so
-that it no longer accepts new WAL records, and the layer map is updated
-accordingly. If a new WAL record for that segment arrives after this step, a new
-Open layer is created to hold it. After this first step, the layer is a Closed
-InMemory state. This first step is called "freezing" the layer.
-
-In the second step, new Delta and Image layers are created, containing all the
-data in the Frozen InMemory layer. When the new layers are ready, the original
-frozen layer is replaced with the new layers in the layer map, and the original
-frozen layer is dropped, releasing the memory.
-
-# Layer files (On-disk layers)
-
-The files are called "layer files". Each layer file corresponds
-to one RELISH_SEG_SIZE slice of a PostgreSQL relation fork or
-non-rel file in a range of LSNs. The layer files
-for each timeline are stored in the timeline's subdirectory under
-.zenith/tenants/<tenantid>/timelines.
-
-There are two kind of layer file: base images, and deltas. A base
-image file contains a layer of a segment as it was at one LSN,
-whereas a delta file contains modifications to a segment - mostly in
-the form of WAL records - in a range of LSN
-
-base image file:
-
-    rel_<spcnode>_<dbnode>_<relnode>_<forknum>_<segno>_<start LSN>
-
-delta file:
-
-    rel_<spcnode>_<dbnode>_<relnode>_<forknum>_<segno>_<start LSN>_<end LSN>
-
-For example:
-
-    rel_1663_13990_2609_0_10_000000000169C348
-    rel_1663_13990_2609_0_10_000000000169C348_0000000001702000
-
-In addition to the relations, with "rel_*" prefix, we use the same
-format for storing various smaller files from the PostgreSQL data
-directory. They will use different suffixes and the naming scheme up
-to the LSNs vary. The Zenith source code uses the term "relish" to
-mean "a relation, or other file that's treated like a relation in the
-storage" For example, a base image of a CLOG segment would be named
-like this:
-
-    pg_xact_0000_0_00000000198B06B0
-
-There is no difference in how the relation and non-relation files are
-managed, except that the first part of file names is different.
-Internally, the relations and non-relation files that are managed in
-the versioned store are together called "relishes".
-
-If a file has been dropped, the last layer file for it is created
-with the _DROPPED suffix, e.g.
-
-    rel_1663_13990_2609_0_10_000000000169C348_0000000001702000_DROPPED
-
-
-## Notation used in this document
-
-The full path of a delta file looks like this:
-
-    .zenith/tenants/941ddc8604413b88b3d208bddf90396c/timelines/4af489b06af8eed9e27a841775616962/rel_1663_13990_2609_0_10_000000000169C348_0000000001702000
-
-For simplicity, the examples below use a simplified notation for the
-paths.  The tenant ID is left out, the timeline ID is replaced with
-the human-readable branch name, and spcnode+dbnode+relnode+forkum+segno
-with a human-readable table name. The LSNs are also shorter. For
-example, a base image file at LSN 100 and a delta file between 100-200
-for 'orders' table on 'main' branch is represented like this:
-
-    main/orders_100
-    main/orders_100_200
-
-
-# Creating layer files
-
-Let's start with a simple example with a system that contains one
-branch called 'main' and two tables, 'orders' and 'customers'. The end
-of WAL is currently at LSN 250. In this starting situation, you would
-have these files on disk:
-
-	main/orders_100
-	main/orders_100_200
-	main/orders_200
-	main/customers_100
-	main/customers_100_200
-	main/customers_200
-
-In addition to those files, the recent changes between LSN 200 and the
-end of WAL at 250 are kept in memory. If the page server crashes, the
-latest records between 200-250 need to be re-read from the WAL.
-
-Whenever enough WAL has been accumulated in memory, the page server
-writes out the changes in memory into new layer files. This process
-is called "checkpointing" (not to be confused with the PostgreSQL
-checkpoints, that's a different thing). The page server only creates
-layer files for relations that have been modified since the last
-checkpoint. For example, if the current end of WAL is at LSN 450, and
-the last checkpoint happened at LSN 400 but there hasn't been any
-recent changes to 'customers' table, you would have these files on
-disk:
-
-	main/orders_100
-	main/orders_100_200
-	main/orders_200
-	main/orders_200_300
-	main/orders_300
-	main/orders_300_400
-	main/orders_400
-	main/customers_100
-	main/customers_100_200
-	main/customers_200
-
-If the customers table is modified later, a new file is created for it
-at the next checkpoint. The new file will cover the "gap" from the
-last layer file, so the LSN ranges are always contiguous:
-
-	main/orders_100
-	main/orders_100_200
-	main/orders_200
-	main/orders_200_300
-	main/orders_300
-	main/orders_300_400
-	main/orders_400
-	main/customers_100
-	main/customers_100_200
-	main/customers_200
-	main/customers_200_500
-	main/customers_500
-
-## Reading page versions
-
-Whenever a GetPage@LSN request comes in from the compute node, the
-page server needs to reconstruct the requested page, as it was at the
-requested LSN. To do that, the page server first checks the recent
-in-memory layer; if the requested page version is found there, it can
-be returned immediatedly without looking at the files on
-disk. Otherwise the page server needs to locate the layer file that
-contains the requested page version.
-
-For example, if a request comes in for table 'orders' at LSN 250, the
-page server would load the 'main/orders_200_300' file into memory, and
-reconstruct and return the requested page from it, as it was at
-LSN 250. Because the layer file consists of a full image of the
-relation at the start LSN and the WAL, reconstructing the page
-involves replaying any WAL records applicable to the page between LSNs
-200-250, starting from the base image at LSN 200.
-
-# Multiple branches
-
-Imagine that a child branch is created at LSN 250:
-
-            @250
-    ----main--+-------------------------->
-               \
-                +---child-------------->
-
-
-Then, the 'orders' table is updated differently on the 'main' and
-'child' branches. You now have this situation on disk:
-
-    main/orders_100
-    main/orders_100_200
-    main/orders_200
-    main/orders_200_300
-    main/orders_300
-    main/orders_300_400
-    main/orders_400
-    main/customers_100
-    main/customers_100_200
-    main/customers_200
-    child/orders_250_300
-    child/orders_300
-    child/orders_300_400
-    child/orders_400
-
-Because the 'customers' table hasn't been modified on the child
-branch, there is no file for it there. If you request a page for it on
-the 'child' branch, the page server will not find any layer file
-for it in the 'child' directory, so it will recurse to look into the
-parent 'main' branch instead.
-
-From the 'child' branch's point of view, the history for each relation
-is linear, and the request's LSN identifies unambiguously which file
-you need to look at. For example, the history for the 'orders' table
-on the 'main' branch consists of these files:
-
-    main/orders_100
-    main/orders_100_200
-    main/orders_200
-    main/orders_200_300
-    main/orders_300
-    main/orders_300_400
-    main/orders_400
-
-And from the 'child' branch's point of view, it consists of these
-files:
-
-    main/orders_100
-    main/orders_100_200
-    main/orders_200
-    main/orders_200_300
-    child/orders_250_300
-    child/orders_300
-    child/orders_300_400
-    child/orders_400
-
-The branch metadata includes the point where the child branch was
-created, LSN 250. If a page request comes with LSN 275, we read the
-page version from the 'child/orders_250_300' file. We might also
-need to reconstruct the page version as it was at LSN 250, in order
-to replay the WAL up to LSN 275, using 'main/orders_200_300' and
-'main/orders_200'. The page versions between 250-300 in the
-'main/orders_200_300' file are ignored when operating on the child
-branch.
-
-Note: It doesn't make any difference if the child branch is created
-when the end of the main branch was at LSN 250, or later when the tip of
-the main branch had already moved on. The latter case, creating a
-branch at a historic LSN, is how we support PITR in Zenith.
-
-
-# Garbage collection
-
-In this scheme, we keep creating new layer files over time. We also
-need a mechanism to remove old files that are no longer needed,
-because disk space isn't infinite.
-
-What files are still needed? Currently, the page server supports PITR
-and branching from any branch at any LSN that is "recent enough" from
-the tip of the branch.  "Recent enough" is defined as an LSN horizon,
-which by default is 64 MB.  (See DEFAULT_GC_HORIZON). For this
-example, let's assume that the LSN horizon is 150 units.
-
-Let's look at the single branch scenario again. Imagine that the end
-of the branch is LSN 525, so that the GC horizon is currently at
-525-150 = 375
-
-	main/orders_100
-	main/orders_100_200
-	main/orders_200
-	main/orders_200_300
-	main/orders_300
-	main/orders_300_400
-	main/orders_400
-	main/orders_400_500
-	main/orders_500
-	main/customers_100
-	main/customers_100_200
-	main/customers_200
-
-We can remove the following files because the end LSNs of those files are
-older than GC horizon 375, and there are more recent layer files for the
-table:
-
-	main/orders_100       DELETE
-	main/orders_100_200   DELETE
-	main/orders_200       DELETE
-	main/orders_200_300   DELETE
-	main/orders_300       STILL NEEDED BY orders_300_400
-	main/orders_300_400   KEEP, NEWER THAN GC HORIZON
-	main/orders_400       .. 
-	main/orders_400_500   .. 
-	main/orders_500       .. 
-	main/customers_100      DELETE
-	main/customers_100_200  DELETE
-	main/customers_200      KEEP, NO NEWER VERSION
-
-'main/customers_100_200' is old enough, but it cannot be
-removed because there is no newer layer file for the table.
-
-Things get slightly more complicated with multiple branches. All of
-the above still holds, but in addition to recent files we must also
-retain older shapshot files that are still needed by child branches.
-For example, if child branch is created at LSN 150, and the 'customers'
-table is updated on the branch, you would have these files:
-
-	main/orders_100        KEEP, NEEDED BY child BRANCH
-	main/orders_100_200    KEEP, NEEDED BY child BRANCH
-	main/orders_200        DELETE
-	main/orders_200_300    DELETE
-	main/orders_300        KEEP, NEWER THAN GC HORIZON
-	main/orders_300_400    KEEP, NEWER THAN GC HORIZON
-	main/orders_400        KEEP, NEWER THAN GC HORIZON
-	main/orders_400_500    KEEP, NEWER THAN GC HORIZON
-	main/orders_500        KEEP, NEWER THAN GC HORIZON
-	main/customers_100       DELETE
-	main/customers_100_200   DELETE
-	main/customers_200       KEEP, NO NEWER VERSION
-	child/customers_150_300  DELETE
-	child/customers_300      KEEP, NO NEWER VERSION
-
-In this situation, 'main/orders_100' and 'main/orders_100_200' cannot
-be removed, even though they are older than the GC horizon, because
-they are still needed by the child branch. 'main/orders_200'
-and 'main/orders_200_300' can still be removed.
-
-If 'orders' is modified later on the 'child' branch, we will create a
-new base image and delta file for it on the child:
-
-	main/orders_100
-	main/orders_100_200
-
-	main/orders_300
-	main/orders_300_400
-	main/orders_400
-	main/orders_400_500
-	main/orders_500
-	main/customers_200
-	child/customers_300
-	child/orders_150_400
-	child/orders_400
-
-After this, the 'main/orders_100' and 'main/orders_100_200' file could
-be removed. It is no longer needed by the child branch, because there
-is a newer layer file there. TODO: This optimization hasn't been
-implemented! The GC algorithm will currently keep the file on the
-'main' branch anyway, for as long as the child branch exists.
-
-TODO:
-Describe GC and checkpoint interval settings.
-
-# TODO: On LSN ranges
-
-In principle, each relation can be checkpointed separately, i.e. the
-LSN ranges of the files don't need to line up. So this would be legal:
-
-	main/orders_100
-	main/orders_100_200
-	main/orders_200
-	main/orders_200_300
-	main/orders_300
-	main/orders_300_400
-	main/orders_400
-	main/customers_150
-	main/customers_150_250
-	main/customers_250
-	main/customers_250_500
-	main/customers_500
-
-However, the code currently always checkpoints all relations together.
-So that situation doesn't arise in practice.
-
-It would also be OK to have overlapping LSN ranges for the same relation:
-
-	main/orders_100
-	main/orders_100_200
-	main/orders_200
-	main/orders_200_300
-	main/orders_300
-	main/orders_250_350
-	main/orders_350
-	main/orders_300_400
-	main/orders_400
-
-The code that reads the layer files should cope with this, but this
-situation doesn't arise either, because the checkpointing code never
-does that.  It could be useful, however, as a transient state when
-garbage collecting around branch points, or explicit recovery
-points. For example, if we start with this:
-
-	main/orders_100
-	main/orders_100_200
-	main/orders_200
-	main/orders_200_300
-	main/orders_300
-
-And there is a branch or explicit recovery point at LSN 150, we could
-replace 'main/orders_100_200' with 'main/orders_150' to keep a
-layer only at that exact point that's still needed, removing the
-other page versions around it. But such compaction has not been
-implemented yet.

pageserver/src/layered_repository/blob.rs

@@ -1,46 +0,0 @@
-use std::io::{Read, Write};
-use std::os::unix::prelude::FileExt;
-
-use anyhow::Result;
-use bookfile::{BookWriter, BoundedReader, ChapterId, ChapterWriter};
-use serde::{Deserialize, Serialize};
-
-#[derive(Serialize, Deserialize)]
-pub struct BlobRange {
-    offset: u64,
-    size: usize,
-}
-
-pub fn read_blob<F: FileExt>(reader: &BoundedReader<&'_ F>, range: &BlobRange) -> Result<Vec<u8>> {
-    let mut buf = vec![0u8; range.size];
-    reader.read_exact_at(&mut buf, range.offset)?;
-    Ok(buf)
-}
-
-pub struct BlobWriter<W> {
-    writer: ChapterWriter<W>,
-    offset: u64,
-}
-
-impl<W: Write> BlobWriter<W> {
-    // This function takes a BookWriter and creates a new chapter to ensure offset is 0.
-    pub fn new(book_writer: BookWriter<W>, chapter_id: impl Into<ChapterId>) -> Self {
-        let writer = book_writer.new_chapter(chapter_id);
-        Self { writer, offset: 0 }
-    }
-
-    pub fn write_blob_from_reader(&mut self, r: &mut impl Read) -> Result<BlobRange> {
-        let len = std::io::copy(r, &mut self.writer)?;
-
-        let range = BlobRange {
-            offset: self.offset,
-            size: len as usize,
-        };
-        self.offset += len as u64;
-        Ok(range)
-    }
-
-    pub fn close(self) -> bookfile::Result<BookWriter<W>> {
-        self.writer.close()
-    }
-}

pageserver/src/layered_repository/delta_layer.rs

@@ -1,620 +0,0 @@
-//!
-//! A DeltaLayer represents a collection of WAL records or page images in a range of
-//! LSNs, for one segment. It is stored on a file on disk.
-//!
-//! Usually a delta layer only contains differences - in the form of WAL records against
-//! a base LSN. However, if a segment is newly created, by creating a new relation or
-//! extending an old one, there might be no base image. In that case, all the entries in
-//! the delta layer must be page images or WAL records with the 'will_init' flag set, so
-//! that they can be replayed without referring to an older page version. Also in some
-//! circumstances, the predecessor layer might actually be another delta layer. That
-//! can happen when you create a new branch in the middle of a delta layer, and the WAL
-//! records on the new branch are put in a new delta layer.
-//!
-//! When a delta file needs to be accessed, we slurp the metadata and relsize chapters
-//! into memory, into the DeltaLayerInner struct. See load() and unload() functions.
-//! To access a page/WAL record, we search `page_version_metas` for the block # and LSN.
-//! The byte ranges in the metadata can be used to find the page/WAL record in
-//! PAGE_VERSIONS_CHAPTER.
-//!
-//! On disk, the delta files are stored in timelines/<timelineid> directory.
-//! Currently, there are no subdirectories, and each delta file is named like this:
-//!
-//!    <spcnode>_<dbnode>_<relnode>_<forknum>_<segno>_<start LSN>_<end LSN>
-//!
-//! For example:
-//!
-//!    1663_13990_2609_0_5_000000000169C348_000000000169C349
-//!
-//! If a relation is dropped, we add a '_DROPPED' to the end of the filename to indicate that.
-//! So the above example would become:
-//!
-//!    1663_13990_2609_0_5_000000000169C348_000000000169C349_DROPPED
-//!
-//! The end LSN indicates when it was dropped in that case, we don't store it in the
-//! file contents in any way.
-//!
-//! A detlta file is constructed using the 'bookfile' crate. Each file consists of two
-//! parts: the page versions and the relation sizes. They are stored as separate chapters.
-//!
-use crate::layered_repository::blob::BlobWriter;
-use crate::layered_repository::filename::{DeltaFileName, PathOrConf};
-use crate::layered_repository::page_versions::PageVersions;
-use crate::layered_repository::storage_layer::{
-    Layer, PageReconstructData, PageReconstructResult, PageVersion, SegmentTag,
-};
-use crate::virtual_file::VirtualFile;
-use crate::waldecoder;
-use crate::PageServerConf;
-use crate::{ZTenantId, ZTimelineId};
-use anyhow::{bail, ensure, Result};
-use log::*;
-use serde::{Deserialize, Serialize};
-use zenith_utils::vec_map::VecMap;
-// avoid binding to Write (conflicts with std::io::Write)
-// while being able to use std::fmt::Write's methods
-use std::fmt::Write as _;
-use std::fs;
-use std::io::{BufWriter, Write};
-use std::ops::Bound::Included;
-use std::path::{Path, PathBuf};
-use std::sync::{Mutex, MutexGuard};
-
-use bookfile::{Book, BookWriter};
-
-use zenith_utils::bin_ser::BeSer;
-use zenith_utils::lsn::Lsn;
-
-use super::blob::{read_blob, BlobRange};
-
-// Magic constant to identify a Zenith delta file
-pub const DELTA_FILE_MAGIC: u32 = 0x5A616E01;
-
-/// Mapping from (block #, lsn) -> page/WAL record
-/// byte ranges in PAGE_VERSIONS_CHAPTER
-static PAGE_VERSION_METAS_CHAPTER: u64 = 1;
-/// Page/WAL bytes - cannot be interpreted
-/// without PAGE_VERSION_METAS_CHAPTER
-static PAGE_VERSIONS_CHAPTER: u64 = 2;
-static REL_SIZES_CHAPTER: u64 = 3;
-
-/// Contains the [`Summary`] struct
-static SUMMARY_CHAPTER: u64 = 4;
-
-#[derive(Debug, Serialize, Deserialize, PartialEq, Eq)]
-struct Summary {
-    tenantid: ZTenantId,
-    timelineid: ZTimelineId,
-    seg: SegmentTag,
-
-    start_lsn: Lsn,
-    end_lsn: Lsn,
-
-    dropped: bool,
-}
-
-impl From<&DeltaLayer> for Summary {
-    fn from(layer: &DeltaLayer) -> Self {
-        Self {
-            tenantid: layer.tenantid,
-            timelineid: layer.timelineid,
-            seg: layer.seg,
-
-            start_lsn: layer.start_lsn,
-            end_lsn: layer.end_lsn,
-
-            dropped: layer.dropped,
-        }
-    }
-}
-
-///
-/// DeltaLayer is the in-memory data structure associated with an
-/// on-disk delta file.  We keep a DeltaLayer in memory for each
-/// file, in the LayerMap. If a layer is in "loaded" state, we have a
-/// copy of the file in memory, in 'inner'. Otherwise the struct is
-/// just a placeholder for a file that exists on disk, and it needs to
-/// be loaded before using it in queries.
-///
-pub struct DeltaLayer {
-    path_or_conf: PathOrConf,
-
-    pub tenantid: ZTenantId,
-    pub timelineid: ZTimelineId,
-    pub seg: SegmentTag,
-
-    //
-    // This entry contains all the changes from 'start_lsn' to 'end_lsn'. The
-    // start is inclusive, and end is exclusive.
-    //
-    pub start_lsn: Lsn,
-    pub end_lsn: Lsn,
-
-    dropped: bool,
-
-    inner: Mutex<DeltaLayerInner>,
-}
-
-pub struct DeltaLayerInner {
-    /// If false, the 'page_version_metas' and 'relsizes' have not been
-    /// loaded into memory yet.
-    loaded: bool,
-
-    book: Option<Book<VirtualFile>>,
-
-    /// All versions of all pages in the file are are kept here.
-    /// Indexed by block number and LSN.
-    page_version_metas: VecMap<(u32, Lsn), BlobRange>,
-
-    /// `relsizes` tracks the size of the relation at different points in time.
-    relsizes: VecMap<Lsn, u32>,
-}
-
-impl Layer for DeltaLayer {
-    fn get_tenant_id(&self) -> ZTenantId {
-        self.tenantid
-    }
-
-    fn get_timeline_id(&self) -> ZTimelineId {
-        self.timelineid
-    }
-
-    fn get_seg_tag(&self) -> SegmentTag {
-        self.seg
-    }
-
-    fn is_dropped(&self) -> bool {
-        self.dropped
-    }
-
-    fn get_start_lsn(&self) -> Lsn {
-        self.start_lsn
-    }
-
-    fn get_end_lsn(&self) -> Lsn {
-        self.end_lsn
-    }
-
-    fn filename(&self) -> PathBuf {
-        PathBuf::from(self.layer_name().to_string())
-    }
-
-    /// Look up given page in the cache.
-    fn get_page_reconstruct_data(
-        &self,
-        blknum: u32,
-        lsn: Lsn,
-        cached_img_lsn: Option<Lsn>,
-        reconstruct_data: &mut PageReconstructData,
-    ) -> Result<PageReconstructResult> {
-        let mut need_image = true;
-
-        assert!(self.seg.blknum_in_seg(blknum));
-
-        match &cached_img_lsn {
-            Some(cached_lsn) if &self.end_lsn <= cached_lsn => {
-                return Ok(PageReconstructResult::Cached)
-            }
-            _ => {}
-        }
-
-        {
-            // Open the file and lock the metadata in memory
-            let inner = self.load()?;
-            let page_version_reader = inner
-                .book
-                .as_ref()
-                .expect("should be loaded in load call above")
-                .chapter_reader(PAGE_VERSIONS_CHAPTER)?;
-
-            // Scan the metadata BTreeMap backwards, starting from the given entry.
-            let minkey = (blknum, Lsn(0));
-            let maxkey = (blknum, lsn);
-            let iter = inner
-                .page_version_metas
-                .slice_range((Included(&minkey), Included(&maxkey)))
-                .iter()
-                .rev();
-            for ((_blknum, pv_lsn), blob_range) in iter {
-                match &cached_img_lsn {
-                    Some(cached_lsn) if pv_lsn <= cached_lsn => {
-                        return Ok(PageReconstructResult::Cached)
-                    }
-                    _ => {}
-                }
-
-                let pv = PageVersion::des(&read_blob(&page_version_reader, blob_range)?)?;
-
-                match pv {
-                    PageVersion::Page(img) => {
-                        // Found a page image, return it
-                        reconstruct_data.page_img = Some(img);
-                        need_image = false;
-                        break;
-                    }
-                    PageVersion::Wal(rec) => {
-                        let will_init = rec.will_init;
-                        reconstruct_data.records.push((*pv_lsn, rec));
-                        if will_init {
-                            // This WAL record initializes the page, so no need to go further back
-                            need_image = false;
-                            break;
-                        }
-                    }
-                }
-            }
-
-            // release metadata lock and close the file
-        }
-
-        // If an older page image is needed to reconstruct the page, let the
-        // caller know.
-        if need_image {
-            Ok(PageReconstructResult::Continue(Lsn(self.start_lsn.0 - 1)))
-        } else {
-            Ok(PageReconstructResult::Complete)
-        }
-    }
-
-    /// Get size of the relation at given LSN
-    fn get_seg_size(&self, lsn: Lsn) -> Result<u32> {
-        assert!(lsn >= self.start_lsn);
-        ensure!(
-            self.seg.rel.is_blocky(),
-            "get_seg_size() called on a non-blocky rel"
-        );
-
-        // Scan the BTreeMap backwards, starting from the given entry.
-        let inner = self.load()?;
-        let slice = inner
-            .relsizes
-            .slice_range((Included(&Lsn(0)), Included(&lsn)));
-
-        if let Some((_entry_lsn, entry)) = slice.last() {
-            Ok(*entry)
-        } else {
-            Err(anyhow::anyhow!("could not find seg size in delta layer"))
-        }
-    }
-
-    /// Does this segment exist at given LSN?
-    fn get_seg_exists(&self, lsn: Lsn) -> Result<bool> {
-        // Is the requested LSN after the rel was dropped?
-        if self.dropped && lsn >= self.end_lsn {
-            return Ok(false);
-        }
-
-        // Otherwise, it exists.
-        Ok(true)
-    }
-
-    ///
-    /// Release most of the memory used by this layer. If it's accessed again later,
-    /// it will need to be loaded back.
-    ///
-    fn unload(&self) -> Result<()> {
-        let mut inner = self.inner.lock().unwrap();
-        inner.page_version_metas = VecMap::default();
-        inner.relsizes = VecMap::default();
-        inner.loaded = false;
-
-        // Note: we keep the Book open. Is that a good idea? The virtual file
-        // machinery has its own rules for closing the file descriptor if it's not
-        // needed, but the Book struct uses up some memory, too.
-
-        Ok(())
-    }
-
-    fn delete(&self) -> Result<()> {
-        // delete underlying file
-        fs::remove_file(self.path())?;
-        Ok(())
-    }
-
-    fn is_incremental(&self) -> bool {
-        true
-    }
-
-    fn is_in_memory(&self) -> bool {
-        false
-    }
-
-    /// debugging function to print out the contents of the layer
-    fn dump(&self) -> Result<()> {
-        println!(
-            "----- delta layer for ten {} tli {} seg {} {}-{} ----",
-            self.tenantid, self.timelineid, self.seg, self.start_lsn, self.end_lsn
-        );
-
-        println!("--- relsizes ---");
-        let inner = self.load()?;
-        for (k, v) in inner.relsizes.as_slice() {
-            println!("  {}: {}", k, v);
-        }
-        println!("--- page versions ---");
-
-        let path = self.path();
-        let file = std::fs::File::open(&path)?;
-        let book = Book::new(file)?;
-
-        let chapter = book.chapter_reader(PAGE_VERSIONS_CHAPTER)?;
-        for ((blk, lsn), blob_range) in inner.page_version_metas.as_slice() {
-            let mut desc = String::new();
-
-            let buf = read_blob(&chapter, blob_range)?;
-            let pv = PageVersion::des(&buf)?;
-
-            match pv {
-                PageVersion::Page(img) => {
-                    write!(&mut desc, " img {} bytes", img.len())?;
-                }
-                PageVersion::Wal(rec) => {
-                    let wal_desc = waldecoder::describe_wal_record(&rec.rec);
-                    write!(
-                        &mut desc,
-                        " rec {} bytes will_init: {} {}",
-                        rec.rec.len(),
-                        rec.will_init,
-                        wal_desc
-                    )?;
-                }
-            }
-
-            println!("  blk {} at {}: {}", blk, lsn, desc);
-        }
-
-        Ok(())
-    }
-}
-
-impl DeltaLayer {
-    fn path_for(
-        path_or_conf: &PathOrConf,
-        timelineid: ZTimelineId,
-        tenantid: ZTenantId,
-        fname: &DeltaFileName,
-    ) -> PathBuf {
-        match path_or_conf {
-            PathOrConf::Path(path) => path.clone(),
-            PathOrConf::Conf(conf) => conf
-                .timeline_path(&timelineid, &tenantid)
-                .join(fname.to_string()),
-        }
-    }
-
-    /// Create a new delta file, using the given page versions and relsizes.
-    /// The page versions are passed in a PageVersions struct. If 'cutoff' is
-    /// given, only page versions with LSN < cutoff are included.
-    ///
-    /// This is used to write the in-memory layer to disk. The page_versions and
-    /// relsizes are thus passed in the same format as they are in the in-memory
-    /// layer, as that's expedient.
-    #[allow(clippy::too_many_arguments)]
-    pub fn create(
-        conf: &'static PageServerConf,
-        timelineid: ZTimelineId,
-        tenantid: ZTenantId,
-        seg: SegmentTag,
-        start_lsn: Lsn,
-        end_lsn: Lsn,
-        dropped: bool,
-        page_versions: &PageVersions,
-        cutoff: Option<Lsn>,
-        relsizes: VecMap<Lsn, u32>,
-    ) -> Result<DeltaLayer> {
-        if seg.rel.is_blocky() {
-            assert!(!relsizes.is_empty());
-        }
-
-        let delta_layer = DeltaLayer {
-            path_or_conf: PathOrConf::Conf(conf),
-            timelineid,
-            tenantid,
-            seg,
-            start_lsn,
-            end_lsn,
-            dropped,
-            inner: Mutex::new(DeltaLayerInner {
-                loaded: false,
-                book: None,
-                page_version_metas: VecMap::default(),
-                relsizes,
-            }),
-        };
-        let mut inner = delta_layer.inner.lock().unwrap();
-
-        // Write the data into a file
-        //
-        // Note: Because we open the file in write-only mode, we cannot
-        // reuse the same VirtualFile for reading later. That's why we don't
-        // set inner.book here. The first read will have to re-open it.
-        //
-        // Note: This overwrites any existing file. There shouldn't be any.
-        // FIXME: throw an error instead?
-        let path = delta_layer.path();
-        let file = VirtualFile::create(&path)?;
-        let buf_writer = BufWriter::new(file);
-        let book = BookWriter::new(buf_writer, DELTA_FILE_MAGIC)?;
-
-        let mut page_version_writer = BlobWriter::new(book, PAGE_VERSIONS_CHAPTER);
-
-        let page_versions_iter = page_versions.ordered_page_version_iter(cutoff);
-        for (blknum, lsn, pos) in page_versions_iter {
-            let blob_range =
-                page_version_writer.write_blob_from_reader(&mut page_versions.reader(pos)?)?;
-
-            inner
-                .page_version_metas
-                .append((blknum, lsn), blob_range)
-                .unwrap();
-        }
-
-        let book = page_version_writer.close()?;
-
-        // Write out page versions
-        let mut chapter = book.new_chapter(PAGE_VERSION_METAS_CHAPTER);
-        let buf = VecMap::ser(&inner.page_version_metas)?;
-        chapter.write_all(&buf)?;
-        let book = chapter.close()?;
-
-        // and relsizes to separate chapter
-        let mut chapter = book.new_chapter(REL_SIZES_CHAPTER);
-        let buf = VecMap::ser(&inner.relsizes)?;
-        chapter.write_all(&buf)?;
-        let book = chapter.close()?;
-
-        let mut chapter = book.new_chapter(SUMMARY_CHAPTER);
-        let summary = Summary {
-            tenantid,
-            timelineid,
-            seg,
-
-            start_lsn,
-            end_lsn,
-
-            dropped,
-        };
-        Summary::ser_into(&summary, &mut chapter)?;
-        let book = chapter.close()?;
-
-        // This flushes the underlying 'buf_writer'.
-        let writer = book.close()?;
-        writer.get_ref().sync_all()?;
-
-        trace!("saved {}", &path.display());
-
-        drop(inner);
-
-        Ok(delta_layer)
-    }
-
-    ///
-    /// Load the contents of the file into memory
-    ///
-    fn load(&self) -> Result<MutexGuard<DeltaLayerInner>> {
-        // quick exit if already loaded
-        let mut inner = self.inner.lock().unwrap();
-
-        if inner.loaded {
-            return Ok(inner);
-        }
-
-        let path = self.path();
-
-        // Open the file if it's not open already.
-        if inner.book.is_none() {
-            let file = VirtualFile::open(&path)?;
-            inner.book = Some(Book::new(file)?);
-        }
-        let book = inner.book.as_ref().unwrap();
-
-        match &self.path_or_conf {
-            PathOrConf::Conf(_) => {
-                let chapter = book.read_chapter(SUMMARY_CHAPTER)?;
-                let actual_summary = Summary::des(&chapter)?;
-
-                let expected_summary = Summary::from(self);
-
-                if actual_summary != expected_summary {
-                    bail!("in-file summary does not match expected summary. actual = {:?} expected = {:?}", actual_summary, expected_summary);
-                }
-            }
-            PathOrConf::Path(path) => {
-                let actual_filename = Path::new(path.file_name().unwrap());
-                let expected_filename = self.filename();
-
-                if actual_filename != expected_filename {
-                    println!(
-                        "warning: filename does not match what is expected from in-file summary"
-                    );
-                    println!("actual: {:?}", actual_filename);
-                    println!("expected: {:?}", expected_filename);
-                }
-            }
-        }
-
-        let chapter = book.read_chapter(PAGE_VERSION_METAS_CHAPTER)?;
-        let page_version_metas = VecMap::des(&chapter)?;
-
-        let chapter = book.read_chapter(REL_SIZES_CHAPTER)?;
-        let relsizes = VecMap::des(&chapter)?;
-
-        debug!("loaded from {}", &path.display());
-
-        inner.page_version_metas = page_version_metas;
-        inner.relsizes = relsizes;
-        inner.loaded = true;
-
-        Ok(inner)
-    }
-
-    /// Create a DeltaLayer struct representing an existing file on disk.
-    pub fn new(
-        conf: &'static PageServerConf,
-        timelineid: ZTimelineId,
-        tenantid: ZTenantId,
-        filename: &DeltaFileName,
-    ) -> DeltaLayer {
-        DeltaLayer {
-            path_or_conf: PathOrConf::Conf(conf),
-            timelineid,
-            tenantid,
-            seg: filename.seg,
-            start_lsn: filename.start_lsn,
-            end_lsn: filename.end_lsn,
-            dropped: filename.dropped,
-            inner: Mutex::new(DeltaLayerInner {
-                loaded: false,
-                book: None,
-                page_version_metas: VecMap::default(),
-                relsizes: VecMap::default(),
-            }),
-        }
-    }
-
-    /// Create a DeltaLayer struct representing an existing file on disk.
-    ///
-    /// This variant is only used for debugging purposes, by the 'dump_layerfile' binary.
-    pub fn new_for_path<F>(path: &Path, book: &Book<F>) -> Result<Self>
-    where
-        F: std::os::unix::prelude::FileExt,
-    {
-        let chapter = book.read_chapter(SUMMARY_CHAPTER)?;
-        let summary = Summary::des(&chapter)?;
-
-        Ok(DeltaLayer {
-            path_or_conf: PathOrConf::Path(path.to_path_buf()),
-            timelineid: summary.timelineid,
-            tenantid: summary.tenantid,
-            seg: summary.seg,
-            start_lsn: summary.start_lsn,
-            end_lsn: summary.end_lsn,
-            dropped: summary.dropped,
-            inner: Mutex::new(DeltaLayerInner {
-                loaded: false,
-                book: None,
-                page_version_metas: VecMap::default(),
-                relsizes: VecMap::default(),
-            }),
-        })
-    }
-
-    fn layer_name(&self) -> DeltaFileName {
-        DeltaFileName {
-            seg: self.seg,
-            start_lsn: self.start_lsn,
-            end_lsn: self.end_lsn,
-            dropped: self.dropped,
-        }
-    }
-
-    /// Path to the layer file in pageserver workdir.
-    pub fn path(&self) -> PathBuf {
-        Self::path_for(
-            &self.path_or_conf,
-            self.timelineid,
-            self.tenantid,
-            &self.layer_name(),
-        )
-    }
-}

pageserver/src/layered_repository/ephemeral_file.rs

@@ -1,298 +0,0 @@
-//! Implementation of append-only file data structure
-//! used to keep in-memory layers spilled on disk.
-
-use crate::page_cache;
-use crate::page_cache::PAGE_SZ;
-use crate::page_cache::{ReadBufResult, WriteBufResult};
-use crate::virtual_file::VirtualFile;
-use crate::PageServerConf;
-use lazy_static::lazy_static;
-use std::cmp::min;
-use std::collections::HashMap;
-use std::fs::OpenOptions;
-use std::io::{Error, ErrorKind, Seek, SeekFrom, Write};
-use std::ops::DerefMut;
-use std::path::PathBuf;
-use std::sync::{Arc, RwLock};
-use zenith_utils::zid::ZTenantId;
-use zenith_utils::zid::ZTimelineId;
-
-use std::os::unix::fs::FileExt;
-
-lazy_static! {
-    ///
-    /// This is the global cache of file descriptors (File objects).
-    ///
-    static ref EPHEMERAL_FILES: RwLock<EphemeralFiles> = RwLock::new(EphemeralFiles {
-        next_file_id: 1,
-        files: HashMap::new(),
-    });
-}
-
-pub struct EphemeralFiles {
-    next_file_id: u64,
-
-    files: HashMap<u64, Arc<VirtualFile>>,
-}
-
-pub struct EphemeralFile {
-    file_id: u64,
-    _tenantid: ZTenantId,
-    _timelineid: ZTimelineId,
-    file: Arc<VirtualFile>,
-
-    pos: u64,
-}
-
-impl EphemeralFile {
-    pub fn create(
-        conf: &PageServerConf,
-        tenantid: ZTenantId,
-        timelineid: ZTimelineId,
-    ) -> Result<EphemeralFile, std::io::Error> {
-        let mut l = EPHEMERAL_FILES.write().unwrap();
-        let file_id = l.next_file_id;
-        l.next_file_id += 1;
-
-        let filename = conf
-            .timeline_path(&timelineid, &tenantid)
-            .join(PathBuf::from(format!("ephemeral-{}", file_id)));
-
-        let file = VirtualFile::open_with_options(
-            &filename,
-            OpenOptions::new().read(true).write(true).create(true),
-        )?;
-        let file_rc = Arc::new(file);
-        l.files.insert(file_id, file_rc.clone());
-
-        Ok(EphemeralFile {
-            file_id,
-            _tenantid: tenantid,
-            _timelineid: timelineid,
-            file: file_rc,
-            pos: 0,
-        })
-    }
-
-    pub fn fill_buffer(&self, buf: &mut [u8], blkno: u32) -> Result<(), Error> {
-        let mut off = 0;
-        while off < PAGE_SZ {
-            let n = self
-                .file
-                .read_at(&mut buf[off..], blkno as u64 * PAGE_SZ as u64 + off as u64)?;
-
-            if n == 0 {
-                // Reached EOF. Fill the rest of the buffer with zeros.
-                const ZERO_BUF: [u8; PAGE_SZ] = [0u8; PAGE_SZ];
-
-                buf[off..].copy_from_slice(&ZERO_BUF[off..]);
-                break;
-            }
-
-            off += n as usize;
-        }
-        Ok(())
-    }
-}
-
-impl FileExt for EphemeralFile {
-    fn read_at(&self, dstbuf: &mut [u8], offset: u64) -> Result<usize, Error> {
-        // Look up the right page
-        let blkno = (offset / PAGE_SZ as u64) as u32;
-        let off = offset as usize % PAGE_SZ;
-        let len = min(PAGE_SZ - off, dstbuf.len());
-
-        let read_guard;
-        let mut write_guard;
-
-        let cache = page_cache::get();
-        let buf = match cache.read_ephemeral_buf(self.file_id, blkno) {
-            ReadBufResult::Found(guard) => {
-                read_guard = guard;
-                read_guard.as_ref()
-            }
-            ReadBufResult::NotFound(guard) => {
-                // Read the page from disk into the buffer
-                write_guard = guard;
-                self.fill_buffer(write_guard.deref_mut(), blkno)?;
-                write_guard.mark_valid();
-
-                // And then fall through to read the requested slice from the
-                // buffer.
-                write_guard.as_ref()
-            }
-        };
-
-        dstbuf[0..len].copy_from_slice(&buf[off..(off + len)]);
-        Ok(len)
-    }
-
-    fn write_at(&self, srcbuf: &[u8], offset: u64) -> Result<usize, Error> {
-        // Look up the right page
-        let blkno = (offset / PAGE_SZ as u64) as u32;
-        let off = offset as usize % PAGE_SZ;
-        let len = min(PAGE_SZ - off, srcbuf.len());
-
-        let mut write_guard;
-        let cache = page_cache::get();
-        let buf = match cache.write_ephemeral_buf(self.file_id, blkno) {
-            WriteBufResult::Found(guard) => {
-                write_guard = guard;
-                write_guard.deref_mut()
-            }
-            WriteBufResult::NotFound(guard) => {
-                // Read the page from disk into the buffer
-                // TODO: if we're overwriting the whole page, no need to read it in first
-                write_guard = guard;
-                self.fill_buffer(write_guard.deref_mut(), blkno)?;
-                write_guard.mark_valid();
-
-                // And then fall through to modify it.
-                write_guard.deref_mut()
-            }
-        };
-
-        buf[off..(off + len)].copy_from_slice(&srcbuf[0..len]);
-        write_guard.mark_dirty();
-        Ok(len)
-    }
-}
-
-impl Write for EphemeralFile {
-    fn write(&mut self, buf: &[u8]) -> Result<usize, Error> {
-        let n = self.write_at(buf, self.pos)?;
-        self.pos += n as u64;
-        Ok(n)
-    }
-
-    fn flush(&mut self) -> Result<(), std::io::Error> {
-        todo!()
-    }
-}
-
-impl Seek for EphemeralFile {
-    fn seek(&mut self, pos: SeekFrom) -> Result<u64, Error> {
-        match pos {
-            SeekFrom::Start(offset) => {
-                self.pos = offset;
-            }
-            SeekFrom::End(_offset) => {
-                return Err(Error::new(
-                    ErrorKind::Other,
-                    "SeekFrom::End not supported by EphemeralFile",
-                ));
-            }
-            SeekFrom::Current(offset) => {
-                let pos = self.pos as i128 + offset as i128;
-                if pos < 0 {
-                    return Err(Error::new(
-                        ErrorKind::InvalidInput,
-                        "offset would be negative",
-                    ));
-                }
-                if pos > u64::MAX as i128 {
-                    return Err(Error::new(ErrorKind::InvalidInput, "offset overflow"));
-                }
-                self.pos = pos as u64;
-            }
-        }
-        Ok(self.pos)
-    }
-}
-
-impl Drop for EphemeralFile {
-    fn drop(&mut self) {
-        // drop all pages from page cache
-        let cache = page_cache::get();
-        cache.drop_buffers_for_ephemeral(self.file_id);
-
-        // remove entry from the hash map
-        EPHEMERAL_FILES.write().unwrap().files.remove(&self.file_id);
-
-        // unlink file
-        // FIXME: print error
-        let _ = std::fs::remove_file(&self.file.path);
-    }
-}
-
-pub fn writeback(file_id: u64, blkno: u32, buf: &[u8]) -> Result<(), std::io::Error> {
-    if let Some(file) = EPHEMERAL_FILES.read().unwrap().files.get(&file_id) {
-        file.write_all_at(buf, blkno as u64 * PAGE_SZ as u64)?;
-        Ok(())
-    } else {
-        Err(std::io::Error::new(
-            ErrorKind::Other,
-            "could not write back page, not found in ephemeral files hash",
-        ))
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use rand::seq::SliceRandom;
-    use rand::thread_rng;
-    use std::fs;
-    use std::str::FromStr;
-
-    fn repo_harness(
-        test_name: &str,
-    ) -> Result<(&'static PageServerConf, ZTenantId, ZTimelineId), Error> {
-        let repo_dir = PageServerConf::test_repo_dir(test_name);
-        let _ = fs::remove_dir_all(&repo_dir);
-        let conf = PageServerConf::dummy_conf(repo_dir);
-        // Make a static copy of the config. This can never be free'd, but that's
-        // OK in a test.
-        let conf: &'static PageServerConf = Box::leak(Box::new(conf));
-
-        let tenantid = ZTenantId::from_str("11000000000000000000000000000000").unwrap();
-        let timelineid = ZTimelineId::from_str("22000000000000000000000000000000").unwrap();
-        fs::create_dir_all(conf.timeline_path(&timelineid, &tenantid))?;
-
-        Ok((conf, tenantid, timelineid))
-    }
-
-    // Helper function to slurp contents of a file, starting at the current position,
-    // into a string
-    fn read_string(efile: &EphemeralFile, offset: u64, len: usize) -> Result<String, Error> {
-        let mut buf = Vec::new();
-        buf.resize(len, 0u8);
-
-        efile.read_exact_at(&mut buf, offset)?;
-
-        Ok(String::from_utf8_lossy(&buf)
-            .trim_end_matches('\0')
-            .to_string())
-    }
-
-    #[test]
-    fn test_ephemeral_files() -> Result<(), Error> {
-        let (conf, tenantid, timelineid) = repo_harness("ephemeral_files")?;
-
-        let mut file_a = EphemeralFile::create(conf, tenantid, timelineid)?;
-
-        file_a.write_all(b"foo")?;
-        assert_eq!("foo", read_string(&file_a, 0, 20)?);
-
-        file_a.write_all(b"bar")?;
-        assert_eq!("foobar", read_string(&file_a, 0, 20)?);
-
-        // Open a lot of files, enough to cause some page evictions.
-        let mut efiles = Vec::new();
-        for fileno in 0..100 {
-            let mut efile = EphemeralFile::create(conf, tenantid, timelineid)?;
-            efile.write_all(format!("file {}", fileno).as_bytes())?;
-            assert_eq!(format!("file {}", fileno), read_string(&efile, 0, 10)?);
-            efiles.push((fileno, efile));
-        }
-
-        // Check that all the files can still be read from. Use them in random order for
-        // good measure.
-        efiles.as_mut_slice().shuffle(&mut thread_rng());
-        for (fileno, efile) in efiles.iter_mut() {
-            assert_eq!(format!("file {}", fileno), read_string(efile, 0, 10)?);
-        }
-
-        Ok(())
-    }
-}

pageserver/src/layered_repository/filename.rs

@@ -1,315 +0,0 @@
-//!
-//! Helper functions for dealing with filenames of the image and delta layer files.
-//!
-use crate::layered_repository::storage_layer::SegmentTag;
-use crate::relish::*;
-use crate::PageServerConf;
-use crate::{ZTenantId, ZTimelineId};
-use std::fmt;
-use std::fs;
-use std::path::PathBuf;
-
-use anyhow::Result;
-use log::*;
-use zenith_utils::lsn::Lsn;
-
-use super::metadata::METADATA_FILE_NAME;
-
-// Note: LayeredTimeline::load_layer_map() relies on this sort order
-#[derive(Debug, PartialEq, Eq, PartialOrd, Ord, Clone)]
-pub struct DeltaFileName {
-    pub seg: SegmentTag,
-    pub start_lsn: Lsn,
-    pub end_lsn: Lsn,
-    pub dropped: bool,
-}
-
-/// Represents the filename of a DeltaLayer
-///
-///    <spcnode>_<dbnode>_<relnode>_<forknum>_<seg>_<start LSN>_<end LSN>
-///
-/// or if it was dropped:
-///
-///    <spcnode>_<dbnode>_<relnode>_<forknum>_<seg>_<start LSN>_<end LSN>_DROPPED
-///
-impl DeltaFileName {
-    ///
-    /// Parse a string as a delta file name. Returns None if the filename does not
-    /// match the expected pattern.
-    ///
-    pub fn parse_str(fname: &str) -> Option<Self> {
-        let rel;
-        let mut parts;
-        if let Some(rest) = fname.strip_prefix("rel_") {
-            parts = rest.split('_');
-            rel = RelishTag::Relation(RelTag {
-                spcnode: parts.next()?.parse::<u32>().ok()?,
-                dbnode: parts.next()?.parse::<u32>().ok()?,
-                relnode: parts.next()?.parse::<u32>().ok()?,
-                forknum: parts.next()?.parse::<u8>().ok()?,
-            });
-        } else if let Some(rest) = fname.strip_prefix("pg_xact_") {
-            parts = rest.split('_');
-            rel = RelishTag::Slru {
-                slru: SlruKind::Clog,
-                segno: u32::from_str_radix(parts.next()?, 16).ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_multixact_members_") {
-            parts = rest.split('_');
-            rel = RelishTag::Slru {
-                slru: SlruKind::MultiXactMembers,
-                segno: u32::from_str_radix(parts.next()?, 16).ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_multixact_offsets_") {
-            parts = rest.split('_');
-            rel = RelishTag::Slru {
-                slru: SlruKind::MultiXactOffsets,
-                segno: u32::from_str_radix(parts.next()?, 16).ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_filenodemap_") {
-            parts = rest.split('_');
-            rel = RelishTag::FileNodeMap {
-                spcnode: parts.next()?.parse::<u32>().ok()?,
-                dbnode: parts.next()?.parse::<u32>().ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_twophase_") {
-            parts = rest.split('_');
-            rel = RelishTag::TwoPhase {
-                xid: parts.next()?.parse::<u32>().ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_control_checkpoint_") {
-            parts = rest.split('_');
-            rel = RelishTag::Checkpoint;
-        } else if let Some(rest) = fname.strip_prefix("pg_control_") {
-            parts = rest.split('_');
-            rel = RelishTag::ControlFile;
-        } else {
-            return None;
-        }
-
-        let segno = parts.next()?.parse::<u32>().ok()?;
-
-        let seg = SegmentTag { rel, segno };
-
-        let start_lsn = Lsn::from_hex(parts.next()?).ok()?;
-        let end_lsn = Lsn::from_hex(parts.next()?).ok()?;
-
-        let mut dropped = false;
-        if let Some(suffix) = parts.next() {
-            if suffix == "DROPPED" {
-                dropped = true;
-            } else {
-                return None;
-            }
-        }
-        if parts.next().is_some() {
-            return None;
-        }
-
-        Some(DeltaFileName {
-            seg,
-            start_lsn,
-            end_lsn,
-            dropped,
-        })
-    }
-}
-
-impl fmt::Display for DeltaFileName {
-    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
-        let basename = match self.seg.rel {
-            RelishTag::Relation(reltag) => format!(
-                "rel_{}_{}_{}_{}",
-                reltag.spcnode, reltag.dbnode, reltag.relnode, reltag.forknum
-            ),
-            RelishTag::Slru {
-                slru: SlruKind::Clog,
-                segno,
-            } => format!("pg_xact_{:04X}", segno),
-            RelishTag::Slru {
-                slru: SlruKind::MultiXactMembers,
-                segno,
-            } => format!("pg_multixact_members_{:04X}", segno),
-            RelishTag::Slru {
-                slru: SlruKind::MultiXactOffsets,
-                segno,
-            } => format!("pg_multixact_offsets_{:04X}", segno),
-            RelishTag::FileNodeMap { spcnode, dbnode } => {
-                format!("pg_filenodemap_{}_{}", spcnode, dbnode)
-            }
-            RelishTag::TwoPhase { xid } => format!("pg_twophase_{}", xid),
-            RelishTag::Checkpoint => "pg_control_checkpoint".to_string(),
-            RelishTag::ControlFile => "pg_control".to_string(),
-        };
-
-        write!(
-            f,
-            "{}_{}_{:016X}_{:016X}{}",
-            basename,
-            self.seg.segno,
-            u64::from(self.start_lsn),
-            u64::from(self.end_lsn),
-            if self.dropped { "_DROPPED" } else { "" }
-        )
-    }
-}
-
-#[derive(Debug, PartialEq, Eq, PartialOrd, Ord, Clone)]
-pub struct ImageFileName {
-    pub seg: SegmentTag,
-    pub lsn: Lsn,
-}
-
-///
-/// Represents the filename of an ImageLayer
-///
-///    <spcnode>_<dbnode>_<relnode>_<forknum>_<seg>_<LSN>
-///
-impl ImageFileName {
-    ///
-    /// Parse a string as an image file name. Returns None if the filename does not
-    /// match the expected pattern.
-    ///
-    pub fn parse_str(fname: &str) -> Option<Self> {
-        let rel;
-        let mut parts;
-        if let Some(rest) = fname.strip_prefix("rel_") {
-            parts = rest.split('_');
-            rel = RelishTag::Relation(RelTag {
-                spcnode: parts.next()?.parse::<u32>().ok()?,
-                dbnode: parts.next()?.parse::<u32>().ok()?,
-                relnode: parts.next()?.parse::<u32>().ok()?,
-                forknum: parts.next()?.parse::<u8>().ok()?,
-            });
-        } else if let Some(rest) = fname.strip_prefix("pg_xact_") {
-            parts = rest.split('_');
-            rel = RelishTag::Slru {
-                slru: SlruKind::Clog,
-                segno: u32::from_str_radix(parts.next()?, 16).ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_multixact_members_") {
-            parts = rest.split('_');
-            rel = RelishTag::Slru {
-                slru: SlruKind::MultiXactMembers,
-                segno: u32::from_str_radix(parts.next()?, 16).ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_multixact_offsets_") {
-            parts = rest.split('_');
-            rel = RelishTag::Slru {
-                slru: SlruKind::MultiXactOffsets,
-                segno: u32::from_str_radix(parts.next()?, 16).ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_filenodemap_") {
-            parts = rest.split('_');
-            rel = RelishTag::FileNodeMap {
-                spcnode: parts.next()?.parse::<u32>().ok()?,
-                dbnode: parts.next()?.parse::<u32>().ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_twophase_") {
-            parts = rest.split('_');
-            rel = RelishTag::TwoPhase {
-                xid: parts.next()?.parse::<u32>().ok()?,
-            };
-        } else if let Some(rest) = fname.strip_prefix("pg_control_checkpoint_") {
-            parts = rest.split('_');
-            rel = RelishTag::Checkpoint;
-        } else if let Some(rest) = fname.strip_prefix("pg_control_") {
-            parts = rest.split('_');
-            rel = RelishTag::ControlFile;
-        } else {
-            return None;
-        }
-
-        let segno = parts.next()?.parse::<u32>().ok()?;
-
-        let seg = SegmentTag { rel, segno };
-
-        let lsn = Lsn::from_hex(parts.next()?).ok()?;
-
-        if parts.next().is_some() {
-            return None;
-        }
-
-        Some(ImageFileName { seg, lsn })
-    }
-}
-
-impl fmt::Display for ImageFileName {
-    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
-        let basename = match self.seg.rel {
-            RelishTag::Relation(reltag) => format!(
-                "rel_{}_{}_{}_{}",
-                reltag.spcnode, reltag.dbnode, reltag.relnode, reltag.forknum
-            ),
-            RelishTag::Slru {
-                slru: SlruKind::Clog,
-                segno,
-            } => format!("pg_xact_{:04X}", segno),
-            RelishTag::Slru {
-                slru: SlruKind::MultiXactMembers,
-                segno,
-            } => format!("pg_multixact_members_{:04X}", segno),
-            RelishTag::Slru {
-                slru: SlruKind::MultiXactOffsets,
-                segno,
-            } => format!("pg_multixact_offsets_{:04X}", segno),
-            RelishTag::FileNodeMap { spcnode, dbnode } => {
-                format!("pg_filenodemap_{}_{}", spcnode, dbnode)
-            }
-            RelishTag::TwoPhase { xid } => format!("pg_twophase_{}", xid),
-            RelishTag::Checkpoint => "pg_control_checkpoint".to_string(),
-            RelishTag::ControlFile => "pg_control".to_string(),
-        };
-
-        write!(
-            f,
-            "{}_{}_{:016X}",
-            basename,
-            self.seg.segno,
-            u64::from(self.lsn),
-        )
-    }
-}
-
-/// Scan timeline directory and create ImageFileName and DeltaFilename
-/// structs representing all files on disk
-///
-/// TODO: returning an Iterator would be more idiomatic
-pub fn list_files(
-    conf: &'static PageServerConf,
-    timelineid: ZTimelineId,
-    tenantid: ZTenantId,
-) -> Result<(Vec<ImageFileName>, Vec<DeltaFileName>)> {
-    let path = conf.timeline_path(&timelineid, &tenantid);
-
-    let mut deltafiles: Vec<DeltaFileName> = Vec::new();
-    let mut imgfiles: Vec<ImageFileName> = Vec::new();
-    for direntry in fs::read_dir(path)? {
-        let fname = direntry?.file_name();
-        let fname = fname.to_str().unwrap();
-
-        if let Some(deltafilename) = DeltaFileName::parse_str(fname) {
-            deltafiles.push(deltafilename);
-        } else if let Some(imgfilename) = ImageFileName::parse_str(fname) {
-            imgfiles.push(imgfilename);
-        } else if fname == METADATA_FILE_NAME || fname.ends_with(".old") {
-            // ignore these
-        } else {
-            warn!("unrecognized filename in timeline dir: {}", fname);
-        }
-    }
-    Ok((imgfiles, deltafiles))
-}
-
-/// Helper enum to hold a PageServerConf, or a path
-///
-/// This is used by DeltaLayer and ImageLayer. Normally, this holds a reference to the
-/// global config, and paths to layer files are constructed using the tenant/timeline
-/// path from the config. But in the 'dump_layerfile' binary, we need to construct a Layer
-/// struct for a file on disk, without having a page server running, so that we have no
-/// config. In that case, we use the Path variant to hold the full path to the file on
-/// disk.
-pub enum PathOrConf {
-    Path(PathBuf),
-    Conf(&'static PageServerConf),
-}

pageserver/src/layered_repository/global_layer_map.rs

@@ -1,142 +0,0 @@
-//!
-//! Global registry of open layers.
-//!
-//! Whenever a new in-memory layer is created to hold incoming WAL, it is registered
-//! in [`GLOBAL_LAYER_MAP`], so that we can keep track of the total number of
-//! in-memory layers in the system, and know when we need to evict some to release
-//! memory.
-//!
-//! Each layer is assigned a unique ID when it's registered in the global registry.
-//! The ID can be used to relocate the layer later, without having to hold locks.
-//!
-
-use std::sync::atomic::{AtomicU8, Ordering};
-use std::sync::{Arc, RwLock};
-
-use super::inmemory_layer::InMemoryLayer;
-
-use lazy_static::lazy_static;
-
-const MAX_USAGE_COUNT: u8 = 5;
-
-lazy_static! {
-    pub static ref GLOBAL_LAYER_MAP: RwLock<InMemoryLayers> =
-        RwLock::new(InMemoryLayers::default());
-}
-
-// TODO these types can probably be smaller
-#[derive(PartialEq, Eq, Clone, Copy)]
-pub struct LayerId {
-    index: usize,
-    tag: u64, // to avoid ABA problem
-}
-
-enum SlotData {
-    Occupied(Arc<InMemoryLayer>),
-    /// Vacant slots form a linked list, the value is the index
-    /// of the next vacant slot in the list.
-    Vacant(Option<usize>),
-}
-
-struct Slot {
-    tag: u64,
-    data: SlotData,
-    usage_count: AtomicU8, // for clock algorithm
-}
-
-#[derive(Default)]
-pub struct InMemoryLayers {
-    slots: Vec<Slot>,
-    num_occupied: usize,
-
-    // Head of free-slot list.
-    next_empty_slot_idx: Option<usize>,
-}
-
-impl InMemoryLayers {
-    pub fn insert(&mut self, layer: Arc<InMemoryLayer>) -> LayerId {
-        let slot_idx = match self.next_empty_slot_idx {
-            Some(slot_idx) => slot_idx,
-            None => {
-                let idx = self.slots.len();
-                self.slots.push(Slot {
-                    tag: 0,
-                    data: SlotData::Vacant(None),
-                    usage_count: AtomicU8::new(0),
-                });
-                idx
-            }
-        };
-        let slots_len = self.slots.len();
-
-        let slot = &mut self.slots[slot_idx];
-
-        match slot.data {
-            SlotData::Occupied(_) => {
-                panic!("an occupied slot was in the free list");
-            }
-            SlotData::Vacant(next_empty_slot_idx) => {
-                self.next_empty_slot_idx = next_empty_slot_idx;
-            }
-        }
-
-        slot.data = SlotData::Occupied(layer);
-        slot.usage_count.store(1, Ordering::Relaxed);
-
-        self.num_occupied += 1;
-        assert!(self.num_occupied <= slots_len);
-
-        LayerId {
-            index: slot_idx,
-            tag: slot.tag,
-        }
-    }
-
-    pub fn get(&self, layer_id: &LayerId) -> Option<Arc<InMemoryLayer>> {
-        let slot = self.slots.get(layer_id.index)?; // TODO should out of bounds indexes just panic?
-        if slot.tag != layer_id.tag {
-            return None;
-        }
-
-        if let SlotData::Occupied(layer) = &slot.data {
-            let _ = slot.usage_count.fetch_update(
-                Ordering::Relaxed,
-                Ordering::Relaxed,
-                |old_usage_count| {
-                    if old_usage_count < MAX_USAGE_COUNT {
-                        Some(old_usage_count + 1)
-                    } else {
-                        None
-                    }
-                },
-            );
-            Some(Arc::clone(layer))
-        } else {
-            None
-        }
-    }
-
-    // TODO this won't be a public API in the future
-    pub fn remove(&mut self, layer_id: &LayerId) {
-        let slot = &mut self.slots[layer_id.index];
-
-        if slot.tag != layer_id.tag {
-            return;
-        }
-
-        match &slot.data {
-            SlotData::Occupied(_layer) => {
-                // TODO evict the layer
-            }
-            SlotData::Vacant(_) => unimplemented!(),
-        }
-
-        slot.data = SlotData::Vacant(self.next_empty_slot_idx);
-        self.next_empty_slot_idx = Some(layer_id.index);
-
-        assert!(self.num_occupied > 0);
-        self.num_occupied -= 1;
-
-        slot.tag = slot.tag.wrapping_add(1);
-    }
-}

pageserver/src/layered_repository/image_layer.rs

@@ -1,513 +0,0 @@
-//! An ImageLayer represents an image or a snapshot of a segment at one particular LSN.
-//! It is stored in a file on disk.
-//!
-//! On disk, the image files are stored in timelines/<timelineid> directory.
-//! Currently, there are no subdirectories, and each image layer file is named like this:
-//!
-//! Note that segno is
-//!    <spcnode>_<dbnode>_<relnode>_<forknum>_<segno>_<LSN>
-//!
-//! For example:
-//!
-//!    1663_13990_2609_0_5_000000000169C348
-//!
-//! An image file is constructed using the 'bookfile' crate.
-//!
-//! Only metadata is loaded into memory by the load function.
-//! When images are needed, they are read directly from disk.
-//!
-//! For blocky relishes, the images are stored in BLOCKY_IMAGES_CHAPTER.
-//! All the images are required to be BLOCK_SIZE, which allows for random access.
-//!
-//! For non-blocky relishes, the image can be found in NONBLOCKY_IMAGE_CHAPTER.
-//!
-use crate::layered_repository::filename::{ImageFileName, PathOrConf};
-use crate::layered_repository::storage_layer::{
-    Layer, PageReconstructData, PageReconstructResult, SegmentTag,
-};
-use crate::layered_repository::LayeredTimeline;
-use crate::layered_repository::RELISH_SEG_SIZE;
-use crate::virtual_file::VirtualFile;
-use crate::PageServerConf;
-use crate::{ZTenantId, ZTimelineId};
-use anyhow::{anyhow, bail, ensure, Context, Result};
-use bytes::Bytes;
-use log::*;
-use serde::{Deserialize, Serialize};
-use std::convert::TryInto;
-use std::fs;
-use std::io::{BufWriter, Write};
-use std::path::{Path, PathBuf};
-use std::sync::{Mutex, MutexGuard};
-
-use bookfile::{Book, BookWriter};
-
-use zenith_utils::bin_ser::BeSer;
-use zenith_utils::lsn::Lsn;
-
-// Magic constant to identify a Zenith segment image file
-pub const IMAGE_FILE_MAGIC: u32 = 0x5A616E01 + 1;
-
-/// Contains each block in block # order
-const BLOCKY_IMAGES_CHAPTER: u64 = 1;
-const NONBLOCKY_IMAGE_CHAPTER: u64 = 2;
-
-/// Contains the [`Summary`] struct
-const SUMMARY_CHAPTER: u64 = 3;
-
-#[derive(Debug, Serialize, Deserialize, PartialEq, Eq)]
-struct Summary {
-    tenantid: ZTenantId,
-    timelineid: ZTimelineId,
-    seg: SegmentTag,
-
-    lsn: Lsn,
-}
-
-impl From<&ImageLayer> for Summary {
-    fn from(layer: &ImageLayer) -> Self {
-        Self {
-            tenantid: layer.tenantid,
-            timelineid: layer.timelineid,
-            seg: layer.seg,
-
-            lsn: layer.lsn,
-        }
-    }
-}
-
-const BLOCK_SIZE: usize = 8192;
-
-///
-/// ImageLayer is the in-memory data structure associated with an on-disk image
-/// file.  We keep an ImageLayer in memory for each file, in the LayerMap. If a
-/// layer is in "loaded" state, we have a copy of the file in memory, in 'inner'.
-/// Otherwise the struct is just a placeholder for a file that exists on disk,
-/// and it needs to be loaded before using it in queries.
-///
-pub struct ImageLayer {
-    path_or_conf: PathOrConf,
-    pub tenantid: ZTenantId,
-    pub timelineid: ZTimelineId,
-    pub seg: SegmentTag,
-
-    // This entry contains an image of all pages as of this LSN
-    pub lsn: Lsn,
-
-    inner: Mutex<ImageLayerInner>,
-}
-
-#[derive(Clone)]
-enum ImageType {
-    Blocky { num_blocks: u32 },
-    NonBlocky,
-}
-
-pub struct ImageLayerInner {
-    /// If None, the 'image_type' has not been loaded into memory yet.
-    book: Option<Book<VirtualFile>>,
-
-    /// Derived from filename and bookfile chapter metadata
-    image_type: ImageType,
-}
-
-impl Layer for ImageLayer {
-    fn filename(&self) -> PathBuf {
-        PathBuf::from(self.layer_name().to_string())
-    }
-
-    fn get_tenant_id(&self) -> ZTenantId {
-        self.tenantid
-    }
-
-    fn get_timeline_id(&self) -> ZTimelineId {
-        self.timelineid
-    }
-
-    fn get_seg_tag(&self) -> SegmentTag {
-        self.seg
-    }
-
-    fn is_dropped(&self) -> bool {
-        false
-    }
-
-    fn get_start_lsn(&self) -> Lsn {
-        self.lsn
-    }
-
-    fn get_end_lsn(&self) -> Lsn {
-        // End-bound is exclusive
-        self.lsn + 1
-    }
-
-    /// Look up given page in the file
-    fn get_page_reconstruct_data(
-        &self,
-        blknum: u32,
-        lsn: Lsn,
-        cached_img_lsn: Option<Lsn>,
-        reconstruct_data: &mut PageReconstructData,
-    ) -> Result<PageReconstructResult> {
-        assert!(lsn >= self.lsn);
-
-        match cached_img_lsn {
-            Some(cached_lsn) if self.lsn <= cached_lsn => return Ok(PageReconstructResult::Cached),
-            _ => {}
-        }
-
-        let inner = self.load()?;
-
-        let base_blknum = blknum % RELISH_SEG_SIZE;
-
-        let buf = match &inner.image_type {
-            ImageType::Blocky { num_blocks } => {
-                if base_blknum >= *num_blocks {
-                    return Ok(PageReconstructResult::Missing(lsn));
-                }
-
-                let mut buf = vec![0u8; BLOCK_SIZE];
-                let offset = BLOCK_SIZE as u64 * base_blknum as u64;
-
-                let chapter = inner
-                    .book
-                    .as_ref()
-                    .unwrap()
-                    .chapter_reader(BLOCKY_IMAGES_CHAPTER)?;
-                chapter.read_exact_at(&mut buf, offset)?;
-
-                buf
-            }
-            ImageType::NonBlocky => {
-                ensure!(base_blknum == 0);
-                inner
-                    .book
-                    .as_ref()
-                    .unwrap()
-                    .read_chapter(NONBLOCKY_IMAGE_CHAPTER)?
-                    .into_vec()
-            }
-        };
-
-        reconstruct_data.page_img = Some(Bytes::from(buf));
-        Ok(PageReconstructResult::Complete)
-    }
-
-    /// Get size of the segment
-    fn get_seg_size(&self, _lsn: Lsn) -> Result<u32> {
-        let inner = self.load()?;
-        match inner.image_type {
-            ImageType::Blocky { num_blocks } => Ok(num_blocks),
-            ImageType::NonBlocky => Err(anyhow!("get_seg_size called for non-blocky segment")),
-        }
-    }
-
-    /// Does this segment exist at given LSN?
-    fn get_seg_exists(&self, _lsn: Lsn) -> Result<bool> {
-        Ok(true)
-    }
-
-    fn unload(&self) -> Result<()> {
-        Ok(())
-    }
-
-    fn delete(&self) -> Result<()> {
-        // delete underlying file
-        fs::remove_file(self.path())?;
-        Ok(())
-    }
-
-    fn is_incremental(&self) -> bool {
-        false
-    }
-
-    fn is_in_memory(&self) -> bool {
-        false
-    }
-
-    /// debugging function to print out the contents of the layer
-    fn dump(&self) -> Result<()> {
-        println!(
-            "----- image layer for ten {} tli {} seg {} at {} ----",
-            self.tenantid, self.timelineid, self.seg, self.lsn
-        );
-
-        let inner = self.load()?;
-
-        match inner.image_type {
-            ImageType::Blocky { num_blocks } => println!("({}) blocks ", num_blocks),
-            ImageType::NonBlocky => {
-                let chapter = inner
-                    .book
-                    .as_ref()
-                    .unwrap()
-                    .read_chapter(NONBLOCKY_IMAGE_CHAPTER)?;
-                println!("non-blocky ({} bytes)", chapter.len());
-            }
-        }
-
-        Ok(())
-    }
-}
-
-impl ImageLayer {
-    fn path_for(
-        path_or_conf: &PathOrConf,
-        timelineid: ZTimelineId,
-        tenantid: ZTenantId,
-        fname: &ImageFileName,
-    ) -> PathBuf {
-        match path_or_conf {
-            PathOrConf::Path(path) => path.to_path_buf(),
-            PathOrConf::Conf(conf) => conf
-                .timeline_path(&timelineid, &tenantid)
-                .join(fname.to_string()),
-        }
-    }
-
-    /// Create a new image file, using the given array of pages.
-    fn create(
-        conf: &'static PageServerConf,
-        timelineid: ZTimelineId,
-        tenantid: ZTenantId,
-        seg: SegmentTag,
-        lsn: Lsn,
-        base_images: Vec<Bytes>,
-    ) -> Result<ImageLayer> {
-        let image_type = if seg.rel.is_blocky() {
-            let num_blocks: u32 = base_images.len().try_into()?;
-            ImageType::Blocky { num_blocks }
-        } else {
-            assert_eq!(base_images.len(), 1);
-            ImageType::NonBlocky
-        };
-
-        let layer = ImageLayer {
-            path_or_conf: PathOrConf::Conf(conf),
-            timelineid,
-            tenantid,
-            seg,
-            lsn,
-            inner: Mutex::new(ImageLayerInner {
-                book: None,
-                image_type: image_type.clone(),
-            }),
-        };
-        let inner = layer.inner.lock().unwrap();
-
-        // Write the images into a file
-        //
-        // Note: Because we open the file in write-only mode, we cannot
-        // reuse the same VirtualFile for reading later. That's why we don't
-        // set inner.book here. The first read will have to re-open it.
-        //
-        // Note: This overwrites any existing file. There shouldn't be any.
-        // FIXME: throw an error instead?
-        let path = layer.path();
-        let file = VirtualFile::create(&path)?;
-        let buf_writer = BufWriter::new(file);
-        let book = BookWriter::new(buf_writer, IMAGE_FILE_MAGIC)?;
-
-        let book = match &image_type {
-            ImageType::Blocky { .. } => {
-                let mut chapter = book.new_chapter(BLOCKY_IMAGES_CHAPTER);
-                for block_bytes in base_images {
-                    assert_eq!(block_bytes.len(), BLOCK_SIZE);
-                    chapter.write_all(&block_bytes)?;
-                }
-                chapter.close()?
-            }
-            ImageType::NonBlocky => {
-                let mut chapter = book.new_chapter(NONBLOCKY_IMAGE_CHAPTER);
-                chapter.write_all(&base_images[0])?;
-                chapter.close()?
-            }
-        };
-
-        let mut chapter = book.new_chapter(SUMMARY_CHAPTER);
-        let summary = Summary {
-            tenantid,
-            timelineid,
-            seg,
-
-            lsn,
-        };
-        Summary::ser_into(&summary, &mut chapter)?;
-        let book = chapter.close()?;
-
-        // This flushes the underlying 'buf_writer'.
-        let writer = book.close()?;
-        writer.get_ref().sync_all()?;
-
-        trace!("saved {}", path.display());
-
-        drop(inner);
-
-        Ok(layer)
-    }
-
-    // Create a new image file by materializing every page in a source layer
-    // at given LSN.
-    pub fn create_from_src(
-        conf: &'static PageServerConf,
-        timeline: &LayeredTimeline,
-        src: &dyn Layer,
-        lsn: Lsn,
-    ) -> Result<ImageLayer> {
-        let seg = src.get_seg_tag();
-        let timelineid = timeline.timelineid;
-
-        let startblk;
-        let size;
-        if seg.rel.is_blocky() {
-            size = src.get_seg_size(lsn)?;
-            startblk = seg.segno * RELISH_SEG_SIZE;
-        } else {
-            size = 1;
-            startblk = 0;
-        }
-
-        trace!(
-            "creating new ImageLayer for {} on timeline {} at {}",
-            seg,
-            timelineid,
-            lsn,
-        );
-
-        let mut base_images: Vec<Bytes> = Vec::new();
-        for blknum in startblk..(startblk + size) {
-            let img = timeline.materialize_page(seg, blknum, lsn, &*src)?;
-
-            base_images.push(img);
-        }
-
-        Self::create(conf, timelineid, timeline.tenantid, seg, lsn, base_images)
-    }
-
-    ///
-    /// Load the contents of the file into memory
-    ///
-    fn load(&self) -> Result<MutexGuard<ImageLayerInner>> {
-        // quick exit if already loaded
-        let mut inner = self.inner.lock().unwrap();
-
-        if inner.book.is_some() {
-            return Ok(inner);
-        }
-
-        let path = self.path();
-        let file = VirtualFile::open(&path)
-            .with_context(|| format!("Failed to open virtual file '{}'", path.display()))?;
-        let book = Book::new(file).with_context(|| {
-            format!(
-                "Failed to open virtual file '{}' as a bookfile",
-                path.display()
-            )
-        })?;
-
-        match &self.path_or_conf {
-            PathOrConf::Conf(_) => {
-                let chapter = book.read_chapter(SUMMARY_CHAPTER)?;
-                let actual_summary = Summary::des(&chapter)?;
-
-                let expected_summary = Summary::from(self);
-
-                if actual_summary != expected_summary {
-                    bail!("in-file summary does not match expected summary. actual = {:?} expected = {:?}", actual_summary, expected_summary);
-                }
-            }
-            PathOrConf::Path(path) => {
-                let actual_filename = Path::new(path.file_name().unwrap());
-                let expected_filename = self.filename();
-
-                if actual_filename != expected_filename {
-                    println!(
-                        "warning: filename does not match what is expected from in-file summary"
-                    );
-                    println!("actual: {:?}", actual_filename);
-                    println!("expected: {:?}", expected_filename);
-                }
-            }
-        }
-
-        let image_type = if self.seg.rel.is_blocky() {
-            let chapter = book.chapter_reader(BLOCKY_IMAGES_CHAPTER)?;
-            let images_len = chapter.len();
-            ensure!(images_len % BLOCK_SIZE as u64 == 0);
-            let num_blocks: u32 = (images_len / BLOCK_SIZE as u64).try_into()?;
-            ImageType::Blocky { num_blocks }
-        } else {
-            let _chapter = book.chapter_reader(NONBLOCKY_IMAGE_CHAPTER)?;
-            ImageType::NonBlocky
-        };
-
-        debug!("loaded from {}", &path.display());
-
-        *inner = ImageLayerInner {
-            book: Some(book),
-            image_type,
-        };
-
-        Ok(inner)
-    }
-
-    /// Create an ImageLayer struct representing an existing file on disk
-    pub fn new(
-        conf: &'static PageServerConf,
-        timelineid: ZTimelineId,
-        tenantid: ZTenantId,
-        filename: &ImageFileName,
-    ) -> ImageLayer {
-        ImageLayer {
-            path_or_conf: PathOrConf::Conf(conf),
-            timelineid,
-            tenantid,
-            seg: filename.seg,
-            lsn: filename.lsn,
-            inner: Mutex::new(ImageLayerInner {
-                book: None,
-                image_type: ImageType::Blocky { num_blocks: 0 },
-            }),
-        }
-    }
-
-    /// Create an ImageLayer struct representing an existing file on disk.
-    ///
-    /// This variant is only used for debugging purposes, by the 'dump_layerfile' binary.
-    pub fn new_for_path<F>(path: &Path, book: &Book<F>) -> Result<ImageLayer>
-    where
-        F: std::os::unix::prelude::FileExt,
-    {
-        let chapter = book.read_chapter(SUMMARY_CHAPTER)?;
-        let summary = Summary::des(&chapter)?;
-
-        Ok(ImageLayer {
-            path_or_conf: PathOrConf::Path(path.to_path_buf()),
-            timelineid: summary.timelineid,
-            tenantid: summary.tenantid,
-            seg: summary.seg,
-            lsn: summary.lsn,
-            inner: Mutex::new(ImageLayerInner {
-                book: None,
-                image_type: ImageType::Blocky { num_blocks: 0 },
-            }),
-        })
-    }
-
-    fn layer_name(&self) -> ImageFileName {
-        ImageFileName {
-            seg: self.seg,
-            lsn: self.lsn,
-        }
-    }
-
-    /// Path to the layer file in pageserver workdir.
-    pub fn path(&self) -> PathBuf {
-        Self::path_for(
-            &self.path_or_conf,
-            self.timelineid,
-            self.tenantid,
-            &self.layer_name(),
-        )
-    }
-}

pageserver/src/layered_repository/inmemory_layer.rs

@@ -1,666 +0,0 @@
-//! An in-memory layer stores recently received PageVersions.
-//! The page versions are held in a BTreeMap. To avoid OOM errors, the map size is limited
-//! and layers can be spilled to disk into ephemeral files.
-//!
-//! And there's another BTreeMap to track the size of the relation.
-//!
-use crate::layered_repository::ephemeral_file::EphemeralFile;
-use crate::layered_repository::filename::DeltaFileName;
-use crate::layered_repository::storage_layer::{
-    Layer, PageReconstructData, PageReconstructResult, PageVersion, SegmentTag, RELISH_SEG_SIZE,
-};
-use crate::layered_repository::LayeredTimeline;
-use crate::layered_repository::ZERO_PAGE;
-use crate::layered_repository::{DeltaLayer, ImageLayer};
-use crate::repository::WALRecord;
-use crate::PageServerConf;
-use crate::{ZTenantId, ZTimelineId};
-use anyhow::{ensure, Result};
-use bytes::Bytes;
-use log::*;
-use std::path::PathBuf;
-use std::sync::{Arc, RwLock};
-use zenith_utils::lsn::Lsn;
-use zenith_utils::vec_map::VecMap;
-
-use super::page_versions::PageVersions;
-
-pub struct InMemoryLayer {
-    conf: &'static PageServerConf,
-    tenantid: ZTenantId,
-    timelineid: ZTimelineId,
-    seg: SegmentTag,
-
-    ///
-    /// This layer contains all the changes from 'start_lsn'. The
-    /// start is inclusive.
-    ///
-    start_lsn: Lsn,
-
-    /// LSN of the oldest page version stored in this layer
-    oldest_pending_lsn: Lsn,
-
-    /// The above fields never change. The parts that do change are in 'inner',
-    /// and protected by mutex.
-    inner: RwLock<InMemoryLayerInner>,
-
-    /// Predecessor layer might be needed?
-    incremental: bool,
-}
-
-pub struct InMemoryLayerInner {
-    /// Frozen layers have an exclusive end LSN.
-    /// Writes are only allowed when this is None
-    end_lsn: Option<Lsn>,
-
-    /// If this relation was dropped, remember when that happened.
-    /// The drop LSN is recorded in [`end_lsn`].
-    dropped: bool,
-
-    ///
-    /// All versions of all pages in the layer are are kept here.
-    /// Indexed by block number and LSN.
-    ///
-    page_versions: PageVersions,
-
-    ///
-    /// `segsizes` tracks the size of the segment at different points in time.
-    ///
-    /// For a blocky rel, there is always one entry, at the layer's start_lsn,
-    /// so that determining the size never depends on the predecessor layer. For
-    /// a non-blocky rel, 'segsizes' is not used and is always empty.
-    ///
-    segsizes: VecMap<Lsn, u32>,
-}
-
-impl InMemoryLayerInner {
-    fn assert_writeable(&self) {
-        assert!(self.end_lsn.is_none());
-    }
-
-    fn get_seg_size(&self, lsn: Lsn) -> u32 {
-        // Scan the BTreeMap backwards, starting from the given entry.
-        let slice = self.segsizes.slice_range(..=lsn);
-
-        // We make sure there is always at least one entry
-        if let Some((_entry_lsn, entry)) = slice.last() {
-            *entry
-        } else {
-            panic!("could not find seg size in in-memory layer");
-        }
-    }
-}
-
-impl Layer for InMemoryLayer {
-    // An in-memory layer can be spilled to disk into ephemeral file,
-    // This function is used only for debugging, so we don't need to be very precise.
-    // Construct a filename as if it was a delta layer.
-    fn filename(&self) -> PathBuf {
-        let inner = self.inner.read().unwrap();
-
-        let end_lsn;
-        if let Some(drop_lsn) = inner.end_lsn {
-            end_lsn = drop_lsn;
-        } else {
-            end_lsn = Lsn(u64::MAX);
-        }
-
-        let delta_filename = DeltaFileName {
-            seg: self.seg,
-            start_lsn: self.start_lsn,
-            end_lsn,
-            dropped: inner.dropped,
-        }
-        .to_string();
-
-        PathBuf::from(format!("inmem-{}", delta_filename))
-    }
-
-    fn get_tenant_id(&self) -> ZTenantId {
-        self.tenantid
-    }
-
-    fn get_timeline_id(&self) -> ZTimelineId {
-        self.timelineid
-    }
-
-    fn get_seg_tag(&self) -> SegmentTag {
-        self.seg
-    }
-
-    fn get_start_lsn(&self) -> Lsn {
-        self.start_lsn
-    }
-
-    fn get_end_lsn(&self) -> Lsn {
-        let inner = self.inner.read().unwrap();
-
-        if let Some(end_lsn) = inner.end_lsn {
-            end_lsn
-        } else {
-            Lsn(u64::MAX)
-        }
-    }
-
-    fn is_dropped(&self) -> bool {
-        let inner = self.inner.read().unwrap();
-        inner.dropped
-    }
-
-    /// Look up given page in the cache.
-    fn get_page_reconstruct_data(
-        &self,
-        blknum: u32,
-        lsn: Lsn,
-        cached_img_lsn: Option<Lsn>,
-        reconstruct_data: &mut PageReconstructData,
-    ) -> Result<PageReconstructResult> {
-        let mut need_image = true;
-
-        assert!(self.seg.blknum_in_seg(blknum));
-
-        {
-            let inner = self.inner.read().unwrap();
-
-            // Scan the page versions backwards, starting from `lsn`.
-            let iter = inner
-                .page_versions
-                .get_block_lsn_range(blknum, ..=lsn)
-                .iter()
-                .rev();
-            for (entry_lsn, pos) in iter {
-                match &cached_img_lsn {
-                    Some(cached_lsn) if entry_lsn <= cached_lsn => {
-                        return Ok(PageReconstructResult::Cached)
-                    }
-                    _ => {}
-                }
-
-                let pv = inner.page_versions.get_page_version(*pos)?;
-                match pv {
-                    PageVersion::Page(img) => {
-                        reconstruct_data.page_img = Some(img);
-                        need_image = false;
-                        break;
-                    }
-                    PageVersion::Wal(rec) => {
-                        reconstruct_data.records.push((*entry_lsn, rec.clone()));
-                        if rec.will_init {
-                            // This WAL record initializes the page, so no need to go further back
-                            need_image = false;
-                            break;
-                        }
-                    }
-                }
-            }
-            // release lock on 'inner'
-        }
-
-        // If an older page image is needed to reconstruct the page, let the
-        // caller know
-        if need_image {
-            if self.incremental {
-                Ok(PageReconstructResult::Continue(Lsn(self.start_lsn.0 - 1)))
-            } else {
-                Ok(PageReconstructResult::Missing(self.start_lsn))
-            }
-        } else {
-            Ok(PageReconstructResult::Complete)
-        }
-    }
-
-    /// Get size of the relation at given LSN
-    fn get_seg_size(&self, lsn: Lsn) -> Result<u32> {
-        assert!(lsn >= self.start_lsn);
-        ensure!(
-            self.seg.rel.is_blocky(),
-            "get_seg_size() called on a non-blocky rel"
-        );
-
-        let inner = self.inner.read().unwrap();
-        Ok(inner.get_seg_size(lsn))
-    }
-
-    /// Does this segment exist at given LSN?
-    fn get_seg_exists(&self, lsn: Lsn) -> Result<bool> {
-        let inner = self.inner.read().unwrap();
-
-        // If the segment created after requested LSN,
-        // it doesn't exist in the layer. But we shouldn't
-        // have requested it in the first place.
-        assert!(lsn >= self.start_lsn);
-
-        // Is the requested LSN after the segment was dropped?
-        if inner.dropped {
-            if let Some(end_lsn) = inner.end_lsn {
-                if lsn >= end_lsn {
-                    return Ok(false);
-                }
-            } else {
-                panic!("dropped in-memory layer with no end LSN");
-            }
-        }
-
-        // Otherwise, it exists
-        Ok(true)
-    }
-
-    /// Cannot unload anything in an in-memory layer, since there's no backing
-    /// store. To release memory used by an in-memory layer, use 'freeze' to turn
-    /// it into an on-disk layer.
-    fn unload(&self) -> Result<()> {
-        Ok(())
-    }
-
-    /// Nothing to do here. When you drop the last reference to the layer, it will
-    /// be deallocated.
-    fn delete(&self) -> Result<()> {
-        panic!("can't delete an InMemoryLayer")
-    }
-
-    fn is_incremental(&self) -> bool {
-        self.incremental
-    }
-
-    fn is_in_memory(&self) -> bool {
-        true
-    }
-
-    /// debugging function to print out the contents of the layer
-    fn dump(&self) -> Result<()> {
-        let inner = self.inner.read().unwrap();
-
-        let end_str = inner
-            .end_lsn
-            .as_ref()
-            .map(Lsn::to_string)
-            .unwrap_or_default();
-
-        println!(
-            "----- in-memory layer for tli {} seg {} {}-{} {} ----",
-            self.timelineid, self.seg, self.start_lsn, end_str, inner.dropped,
-        );
-
-        for (k, v) in inner.segsizes.as_slice() {
-            println!("segsizes {}: {}", k, v);
-        }
-
-        for (blknum, lsn, pos) in inner.page_versions.ordered_page_version_iter(None) {
-            let pv = inner.page_versions.get_page_version(pos)?;
-            let pv_description = match pv {
-                PageVersion::Page(_img) => "page",
-                PageVersion::Wal(_rec) => "wal",
-            };
-
-            println!("blk {} at {}: {}\n", blknum, lsn, pv_description);
-        }
-
-        Ok(())
-    }
-}
-
-/// A result of an inmemory layer data being written to disk.
-pub struct LayersOnDisk {
-    pub delta_layers: Vec<DeltaLayer>,
-    pub image_layers: Vec<ImageLayer>,
-}
-
-impl InMemoryLayer {
-    /// Return the oldest page version that's stored in this layer
-    pub fn get_oldest_pending_lsn(&self) -> Lsn {
-        self.oldest_pending_lsn
-    }
-
-    ///
-    /// Create a new, empty, in-memory layer
-    ///
-    pub fn create(
-        conf: &'static PageServerConf,
-        timelineid: ZTimelineId,
-        tenantid: ZTenantId,
-        seg: SegmentTag,
-        start_lsn: Lsn,
-        oldest_pending_lsn: Lsn,
-    ) -> Result<InMemoryLayer> {
-        trace!(
-            "initializing new empty InMemoryLayer for writing {} on timeline {} at {}",
-            seg,
-            timelineid,
-            start_lsn
-        );
-
-        // The segment is initially empty, so initialize 'segsizes' with 0.
-        let mut segsizes = VecMap::default();
-        if seg.rel.is_blocky() {
-            segsizes.append(start_lsn, 0).unwrap();
-        }
-
-        let file = EphemeralFile::create(conf, tenantid, timelineid)?;
-
-        Ok(InMemoryLayer {
-            conf,
-            timelineid,
-            tenantid,
-            seg,
-            start_lsn,
-            oldest_pending_lsn,
-            incremental: false,
-            inner: RwLock::new(InMemoryLayerInner {
-                end_lsn: None,
-                dropped: false,
-                page_versions: PageVersions::new(file),
-                segsizes,
-            }),
-        })
-    }
-
-    // Write operations
-
-    /// Remember new page version, as a WAL record over previous version
-    pub fn put_wal_record(&self, lsn: Lsn, blknum: u32, rec: WALRecord) -> Result<u32> {
-        self.put_page_version(blknum, lsn, PageVersion::Wal(rec))
-    }
-
-    /// Remember new page version, as a full page image
-    pub fn put_page_image(&self, blknum: u32, lsn: Lsn, img: Bytes) -> Result<u32> {
-        self.put_page_version(blknum, lsn, PageVersion::Page(img))
-    }
-
-    /// Common subroutine of the public put_wal_record() and put_page_image() functions.
-    /// Adds the page version to the in-memory tree
-    pub fn put_page_version(&self, blknum: u32, lsn: Lsn, pv: PageVersion) -> Result<u32> {
-        assert!(self.seg.blknum_in_seg(blknum));
-
-        trace!(
-            "put_page_version blk {} of {} at {}/{}",
-            blknum,
-            self.seg.rel,
-            self.timelineid,
-            lsn
-        );
-        let mut inner = self.inner.write().unwrap();
-
-        inner.assert_writeable();
-
-        let old = inner.page_versions.append_or_update_last(blknum, lsn, pv)?;
-
-        if old.is_some() {
-            // We already had an entry for this LSN. That's odd..
-            warn!(
-                "Page version of rel {} blk {} at {} already exists",
-                self.seg.rel, blknum, lsn
-            );
-        }
-
-        // Also update the relation size, if this extended the relation.
-        if self.seg.rel.is_blocky() {
-            let newsize = blknum - self.seg.segno * RELISH_SEG_SIZE + 1;
-
-            // use inner get_seg_size, since calling self.get_seg_size will try to acquire the lock,
-            // which we've just acquired above
-            let oldsize = inner.get_seg_size(lsn);
-            if newsize > oldsize {
-                trace!(
-                    "enlarging segment {} from {} to {} blocks at {}",
-                    self.seg,
-                    oldsize,
-                    newsize,
-                    lsn
-                );
-
-                // If we are extending the relation by more than one page, initialize the "gap"
-                // with zeros
-                //
-                // XXX: What if the caller initializes the gap with subsequent call with same LSN?
-                // I don't think that can happen currently, but that is highly dependent on how
-                // PostgreSQL writes its WAL records and there's no guarantee of it. If it does
-                // happen, we would hit the "page version already exists" warning above on the
-                // subsequent call to initialize the gap page.
-                let gapstart = self.seg.segno * RELISH_SEG_SIZE + oldsize;
-                for gapblknum in gapstart..blknum {
-                    let zeropv = PageVersion::Page(ZERO_PAGE.clone());
-                    trace!(
-                        "filling gap blk {} with zeros for write of {}",
-                        gapblknum,
-                        blknum
-                    );
-                    let old = inner
-                        .page_versions
-                        .append_or_update_last(gapblknum, lsn, zeropv)?;
-                    // We already had an entry for this LSN. That's odd..
-
-                    if old.is_some() {
-                        warn!(
-                            "Page version of rel {} blk {} at {} already exists",
-                            self.seg.rel, blknum, lsn
-                        );
-                    }
-                }
-
-                inner.segsizes.append_or_update_last(lsn, newsize).unwrap();
-                return Ok(newsize - oldsize);
-            }
-        }
-
-        Ok(0)
-    }
-
-    /// Remember that the relation was truncated at given LSN
-    pub fn put_truncation(&self, lsn: Lsn, segsize: u32) {
-        assert!(
-            self.seg.rel.is_blocky(),
-            "put_truncation() called on a non-blocky rel"
-        );
-
-        let mut inner = self.inner.write().unwrap();
-        inner.assert_writeable();
-
-        // check that this we truncate to a smaller size than segment was before the truncation
-        let oldsize = inner.get_seg_size(lsn);
-        assert!(segsize < oldsize);
-
-        let (old, _delta_size) = inner.segsizes.append_or_update_last(lsn, segsize).unwrap();
-
-        if old.is_some() {
-            // We already had an entry for this LSN. That's odd..
-            warn!("Inserting truncation, but had an entry for the LSN already");
-        }
-    }
-
-    /// Remember that the segment was dropped at given LSN
-    pub fn drop_segment(&self, lsn: Lsn) {
-        let mut inner = self.inner.write().unwrap();
-
-        assert!(inner.end_lsn.is_none());
-        assert!(!inner.dropped);
-        inner.dropped = true;
-        assert!(self.start_lsn < lsn);
-        inner.end_lsn = Some(lsn);
-
-        trace!("dropped segment {} at {}", self.seg, lsn);
-    }
-
-    ///
-    /// Initialize a new InMemoryLayer for, by copying the state at the given
-    /// point in time from given existing layer.
-    ///
-    pub fn create_successor_layer(
-        conf: &'static PageServerConf,
-        src: Arc<dyn Layer>,
-        timelineid: ZTimelineId,
-        tenantid: ZTenantId,
-        start_lsn: Lsn,
-        oldest_pending_lsn: Lsn,
-    ) -> Result<InMemoryLayer> {
-        let seg = src.get_seg_tag();
-
-        assert!(oldest_pending_lsn.is_aligned());
-        assert!(oldest_pending_lsn >= start_lsn);
-
-        trace!(
-            "initializing new InMemoryLayer for writing {} on timeline {} at {}",
-            seg,
-            timelineid,
-            start_lsn,
-        );
-
-        // Copy the segment size at the start LSN from the predecessor layer.
-        let mut segsizes = VecMap::default();
-        if seg.rel.is_blocky() {
-            let size = src.get_seg_size(start_lsn)?;
-            segsizes.append(start_lsn, size).unwrap();
-        }
-
-        let file = EphemeralFile::create(conf, tenantid, timelineid)?;
-
-        Ok(InMemoryLayer {
-            conf,
-            timelineid,
-            tenantid,
-            seg,
-            start_lsn,
-            oldest_pending_lsn,
-            incremental: true,
-            inner: RwLock::new(InMemoryLayerInner {
-                end_lsn: None,
-                dropped: false,
-                page_versions: PageVersions::new(file),
-                segsizes,
-            }),
-        })
-    }
-
-    pub fn is_writeable(&self) -> bool {
-        let inner = self.inner.read().unwrap();
-        inner.end_lsn.is_none()
-    }
-
-    /// Make the layer non-writeable. Only call once.
-    /// Records the end_lsn for non-dropped layers.
-    /// `end_lsn` is inclusive
-    pub fn freeze(&self, end_lsn: Lsn) {
-        let mut inner = self.inner.write().unwrap();
-
-        if inner.end_lsn.is_some() {
-            assert!(inner.dropped);
-        } else {
-            assert!(!inner.dropped);
-            assert!(self.start_lsn < end_lsn + 1);
-            inner.end_lsn = Some(Lsn(end_lsn.0 + 1));
-
-            if let Some((lsn, _)) = inner.segsizes.as_slice().last() {
-                assert!(lsn <= &end_lsn, "{:?} {:?}", lsn, end_lsn);
-            }
-
-            for (_blk, lsn, _pv) in inner.page_versions.ordered_page_version_iter(None) {
-                assert!(lsn <= end_lsn);
-            }
-        }
-    }
-
-    /// Write the this frozen in-memory layer to disk.
-    ///
-    /// Returns new layers that replace this one.
-    /// If not dropped, returns a new image layer containing the page versions
-    /// at the `end_lsn`. Can also return a DeltaLayer that includes all the
-    /// WAL records between start and end LSN. (The delta layer is not needed
-    /// when a new relish is created with a single LSN, so that the start and
-    /// end LSN are the same.)
-    pub fn write_to_disk(&self, timeline: &LayeredTimeline) -> Result<LayersOnDisk> {
-        trace!(
-            "write_to_disk {} get_end_lsn is {}",
-            self.filename().display(),
-            self.get_end_lsn()
-        );
-
-        // Grab the lock in read-mode. We hold it over the I/O, but because this
-        // layer is not writeable anymore, no one should be trying to acquire the
-        // write lock on it, so we shouldn't block anyone. There's one exception
-        // though: another thread might have grabbed a reference to this layer
-        // in `get_layer_for_write' just before the checkpointer called
-        // `freeze`, and then `write_to_disk` on it. When the thread gets the
-        // lock, it will see that it's not writeable anymore and retry, but it
-        // would have to wait until we release it. That race condition is very
-        // rare though, so we just accept the potential latency hit for now.
-        let inner = self.inner.read().unwrap();
-        let end_lsn_exclusive = inner.end_lsn.unwrap();
-
-        if inner.dropped {
-            let delta_layer = DeltaLayer::create(
-                self.conf,
-                self.timelineid,
-                self.tenantid,
-                self.seg,
-                self.start_lsn,
-                end_lsn_exclusive,
-                true,
-                &inner.page_versions,
-                None,
-                inner.segsizes.clone(),
-            )?;
-            trace!(
-                "freeze: created delta layer for dropped segment {} {}-{}",
-                self.seg,
-                self.start_lsn,
-                end_lsn_exclusive
-            );
-            return Ok(LayersOnDisk {
-                delta_layers: vec![delta_layer],
-                image_layers: Vec::new(),
-            });
-        }
-
-        // Since `end_lsn` is inclusive, subtract 1.
-        // We want to make an ImageLayer for the last included LSN,
-        // so the DeltaLayer should exclude that LSN.
-        let end_lsn_inclusive = Lsn(end_lsn_exclusive.0 - 1);
-
-        let mut delta_layers = Vec::new();
-
-        if self.start_lsn != end_lsn_inclusive {
-            let (segsizes, _) = inner.segsizes.split_at(&end_lsn_exclusive);
-            // Write the page versions before the cutoff to disk.
-            let delta_layer = DeltaLayer::create(
-                self.conf,
-                self.timelineid,
-                self.tenantid,
-                self.seg,
-                self.start_lsn,
-                end_lsn_inclusive,
-                false,
-                &inner.page_versions,
-                Some(end_lsn_inclusive),
-                segsizes,
-            )?;
-            delta_layers.push(delta_layer);
-            trace!(
-                "freeze: created delta layer {} {}-{}",
-                self.seg,
-                self.start_lsn,
-                end_lsn_inclusive
-            );
-        } else {
-            assert!(inner
-                .page_versions
-                .ordered_page_version_iter(None)
-                .next()
-                .is_none());
-        }
-
-        drop(inner);
-
-        // Write a new base image layer at the cutoff point
-        let image_layer =
-            ImageLayer::create_from_src(self.conf, timeline, self, end_lsn_inclusive)?;
-        trace!(
-            "freeze: created image layer {} at {}",
-            self.seg,
-            end_lsn_inclusive
-        );
-
-        Ok(LayersOnDisk {
-            delta_layers,
-            image_layers: vec![image_layer],
-        })
-    }
-}

pageserver/src/layered_repository/interval_tree.rs

@@ -1,468 +0,0 @@
-///
-/// IntervalTree is data structure for holding intervals. It is generic
-/// to make unit testing possible, but the only real user of it is the layer map,
-///
-/// It's inspired by the "segment tree" or a "statistic tree" as described in
-/// https://en.wikipedia.org/wiki/Segment_tree. However, we use a B-tree to hold
-/// the points instead of a binary tree. This is called an "interval tree" instead
-/// of "segment tree" because the term "segment" is already using Zenith to mean
-/// something else. To add to the confusion, there is another data structure known
-/// as "interval tree" out there (see https://en.wikipedia.org/wiki/Interval_tree),
-/// for storing intervals, but this isn't that.
-///
-/// The basic idea is to have a B-tree of "interesting Points". At each Point,
-/// there is a list of intervals that contain the point. The Points are formed
-/// from the start bounds of each interval; there is a Point for each distinct
-/// start bound.
-///
-/// Operations:
-///
-/// To find intervals that contain a given point, you search the b-tree to find
-/// the nearest Point <= search key. Then you just return the list of intervals.
-///
-/// To insert an interval, find the Point with start key equal to the inserted item.
-/// If the Point doesn't exist yet, create it, by copying all the items from the
-/// previous Point that cover the new Point. Then walk right, inserting the new
-/// interval to all the Points that are contained by the new interval (including the
-/// newly created Point).
-///
-/// To remove an interval, you scan the tree for all the Points that are contained by
-/// the removed interval, and remove it from the list in each Point.
-///
-/// Requirements and assumptions:
-///
-/// - Can store overlapping items
-/// - But there are not many overlapping items
-/// - The interval bounds don't change after it is added to the tree
-/// - Intervals are uniquely identified by pointer equality. You must not be insert the
-///   same interval object twice, and `remove` uses pointer equality to remove the right
-///   interval. It is OK to have two intervals with the same bounds, however.
-///
-use std::collections::BTreeMap;
-use std::fmt::Debug;
-use std::ops::Range;
-use std::sync::Arc;
-
-pub struct IntervalTree<I: ?Sized>
-where
-    I: IntervalItem,
-{
-    points: BTreeMap<I::Key, Point<I>>,
-}
-
-struct Point<I: ?Sized> {
-    /// All intervals that contain this point, in no particular order.
-    ///
-    /// We assume that there aren't a lot of overlappingg intervals, so that this vector
-    /// never grows very large. If that assumption doesn't hold, we could keep this ordered
-    /// by the end bound, to speed up `search`. But as long as there are only a few elements,
-    /// a linear search is OK.
-    elements: Vec<Arc<I>>,
-}
-
-/// Abstraction for an interval that can be stored in the tree
-///
-/// The start bound is inclusive and the end bound is exclusive. End must be greater
-/// than start.
-pub trait IntervalItem {
-    type Key: Ord + Copy + Debug + Sized;
-
-    fn start_key(&self) -> Self::Key;
-    fn end_key(&self) -> Self::Key;
-
-    fn bounds(&self) -> Range<Self::Key> {
-        self.start_key()..self.end_key()
-    }
-}
-
-impl<I: ?Sized> IntervalTree<I>
-where
-    I: IntervalItem,
-{
-    /// Return an element that contains 'key', or precedes it.
-    ///
-    /// If there are multiple candidates, returns the one with the highest 'end' key.
-    pub fn search(&self, key: I::Key) -> Option<Arc<I>> {
-        // Find the greatest point that precedes or is equal to the search key. If there is
-        // none, returns None.
-        let (_, p) = self.points.range(..=key).next_back()?;
-
-        // Find the element with the highest end key at this point
-        let highest_item = p
-            .elements
-            .iter()
-            .reduce(|a, b| {
-                // starting with Rust 1.53, could use `std::cmp::min_by_key` here
-                if a.end_key() > b.end_key() {
-                    a
-                } else {
-                    b
-                }
-            })
-            .unwrap();
-        Some(Arc::clone(highest_item))
-    }
-
-    /// Iterate over all items with start bound >= 'key'
-    pub fn iter_newer(&self, key: I::Key) -> IntervalIter<I> {
-        IntervalIter {
-            point_iter: self.points.range(key..),
-            elem_iter: None,
-        }
-    }
-
-    /// Iterate over all items
-    pub fn iter(&self) -> IntervalIter<I> {
-        IntervalIter {
-            point_iter: self.points.range(..),
-            elem_iter: None,
-        }
-    }
-
-    pub fn insert(&mut self, item: Arc<I>) {
-        let start_key = item.start_key();
-        let end_key = item.end_key();
-        assert!(start_key < end_key);
-        let bounds = start_key..end_key;
-
-        // Find the starting point and walk forward from there
-        let mut found_start_point = false;
-        let iter = self.points.range_mut(bounds);
-        for (point_key, point) in iter {
-            if *point_key == start_key {
-                found_start_point = true;
-                // It is an error to insert the same item to the tree twice.
-                assert!(
-                    !point.elements.iter().any(|x| Arc::ptr_eq(x, &item)),
-                    "interval is already in the tree"
-                );
-            }
-            point.elements.push(Arc::clone(&item));
-        }
-        if !found_start_point {
-            // Create a new Point for the starting point
-
-            // Look at the previous point, and copy over elements that overlap with this
-            // new point
-            let mut new_elements: Vec<Arc<I>> = Vec::new();
-            if let Some((_, prev_point)) = self.points.range(..start_key).next_back() {
-                let overlapping_prev_elements = prev_point
-                    .elements
-                    .iter()
-                    .filter(|x| x.bounds().contains(&start_key))
-                    .cloned();
-
-                new_elements.extend(overlapping_prev_elements);
-            }
-            new_elements.push(item);
-
-            let new_point = Point {
-                elements: new_elements,
-            };
-            self.points.insert(start_key, new_point);
-        }
-    }
-
-    pub fn remove(&mut self, item: &Arc<I>) {
-        // range search points
-        let start_key = item.start_key();
-        let end_key = item.end_key();
-        let bounds = start_key..end_key;
-
-        let mut points_to_remove: Vec<I::Key> = Vec::new();
-        let mut found_start_point = false;
-        for (point_key, point) in self.points.range_mut(bounds) {
-            if *point_key == start_key {
-                found_start_point = true;
-            }
-            let len_before = point.elements.len();
-            point.elements.retain(|other| !Arc::ptr_eq(other, item));
-            let len_after = point.elements.len();
-            assert_eq!(len_after + 1, len_before);
-            if len_after == 0 {
-                points_to_remove.push(*point_key);
-            }
-        }
-        assert!(found_start_point);
-
-        for k in points_to_remove {
-            self.points.remove(&k).unwrap();
-        }
-    }
-}
-
-pub struct IntervalIter<'a, I: ?Sized>
-where
-    I: IntervalItem,
-{
-    point_iter: std::collections::btree_map::Range<'a, I::Key, Point<I>>,
-    elem_iter: Option<(I::Key, std::slice::Iter<'a, Arc<I>>)>,
-}
-
-impl<'a, I> Iterator for IntervalIter<'a, I>
-where
-    I: IntervalItem + ?Sized,
-{
-    type Item = Arc<I>;
-
-    fn next(&mut self) -> Option<Self::Item> {
-        // Iterate over all elements in all the points in 'point_iter'. To avoid
-        // returning the same element twice, we only return each element at its
-        // starting point.
-        loop {
-            // Return next remaining element from the current point
-            if let Some((point_key, elem_iter)) = &mut self.elem_iter {
-                for elem in elem_iter {
-                    if elem.start_key() == *point_key {
-                        return Some(Arc::clone(elem));
-                    }
-                }
-            }
-            // No more elements at this point. Move to next point.
-            if let Some((point_key, point)) = self.point_iter.next() {
-                self.elem_iter = Some((*point_key, point.elements.iter()));
-                continue;
-            } else {
-                // No more points, all done
-                return None;
-            }
-        }
-    }
-}
-
-impl<I: ?Sized> Default for IntervalTree<I>
-where
-    I: IntervalItem,
-{
-    fn default() -> Self {
-        IntervalTree {
-            points: BTreeMap::new(),
-        }
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use std::fmt;
-
-    #[derive(Debug)]
-    struct MockItem {
-        start_key: u32,
-        end_key: u32,
-        val: String,
-    }
-    impl IntervalItem for MockItem {
-        type Key = u32;
-
-        fn start_key(&self) -> u32 {
-            self.start_key
-        }
-        fn end_key(&self) -> u32 {
-            self.end_key
-        }
-    }
-    impl MockItem {
-        fn new(start_key: u32, end_key: u32) -> Self {
-            MockItem {
-                start_key,
-                end_key,
-                val: format!("{}-{}", start_key, end_key),
-            }
-        }
-        fn new_str(start_key: u32, end_key: u32, val: &str) -> Self {
-            MockItem {
-                start_key,
-                end_key,
-                val: format!("{}-{}: {}", start_key, end_key, val),
-            }
-        }
-    }
-    impl fmt::Display for MockItem {
-        fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
-            write!(f, "{}", self.val)
-        }
-    }
-    #[rustfmt::skip]
-    fn assert_search(
-        tree: &IntervalTree<MockItem>,
-        key: u32,
-        expected: &[&str],
-    ) -> Option<Arc<MockItem>> {
-        if let Some(v) = tree.search(key) {
-            let vstr = v.to_string();
-
-            assert!(!expected.is_empty(), "search with {} returned {}, expected None", key, v);
-            assert!(
-                expected.contains(&vstr.as_str()),
-                "search with {} returned {}, expected one of: {:?}",
-                key, v, expected,
-            );
-
-            Some(v)
-        } else {
-            assert!(
-                expected.is_empty(),
-                "search with {} returned None, expected one of {:?}",
-                key, expected
-            );
-            None
-        }
-    }
-
-    fn assert_contents(tree: &IntervalTree<MockItem>, expected: &[&str]) {
-        let mut contents: Vec<String> = tree.iter().map(|e| e.to_string()).collect();
-        contents.sort();
-        assert_eq!(contents, expected);
-    }
-
-    fn dump_tree(tree: &IntervalTree<MockItem>) {
-        for (point_key, point) in tree.points.iter() {
-            print!("{}:", point_key);
-            for e in point.elements.iter() {
-                print!(" {}", e);
-            }
-            println!();
-        }
-    }
-
-    #[test]
-    fn test_interval_tree_simple() {
-        let mut tree: IntervalTree<MockItem> = IntervalTree::default();
-
-        // Simple, non-overlapping ranges.
-        tree.insert(Arc::new(MockItem::new(10, 11)));
-        tree.insert(Arc::new(MockItem::new(11, 12)));
-        tree.insert(Arc::new(MockItem::new(12, 13)));
-        tree.insert(Arc::new(MockItem::new(18, 19)));
-        tree.insert(Arc::new(MockItem::new(17, 18)));
-        tree.insert(Arc::new(MockItem::new(15, 16)));
-
-        assert_search(&tree, 9, &[]);
-        assert_search(&tree, 10, &["10-11"]);
-        assert_search(&tree, 11, &["11-12"]);
-        assert_search(&tree, 12, &["12-13"]);
-        assert_search(&tree, 13, &["12-13"]);
-        assert_search(&tree, 14, &["12-13"]);
-        assert_search(&tree, 15, &["15-16"]);
-        assert_search(&tree, 16, &["15-16"]);
-        assert_search(&tree, 17, &["17-18"]);
-        assert_search(&tree, 18, &["18-19"]);
-        assert_search(&tree, 19, &["18-19"]);
-        assert_search(&tree, 20, &["18-19"]);
-
-        // remove a few entries and search around them again
-        tree.remove(&assert_search(&tree, 10, &["10-11"]).unwrap()); // first entry
-        tree.remove(&assert_search(&tree, 12, &["12-13"]).unwrap()); // entry in the middle
-        tree.remove(&assert_search(&tree, 18, &["18-19"]).unwrap()); // last entry
-        assert_search(&tree, 9, &[]);
-        assert_search(&tree, 10, &[]);
-        assert_search(&tree, 11, &["11-12"]);
-        assert_search(&tree, 12, &["11-12"]);
-        assert_search(&tree, 14, &["11-12"]);
-        assert_search(&tree, 15, &["15-16"]);
-        assert_search(&tree, 17, &["17-18"]);
-        assert_search(&tree, 18, &["17-18"]);
-    }
-
-    #[test]
-    fn test_interval_tree_overlap() {
-        let mut tree: IntervalTree<MockItem> = IntervalTree::default();
-
-        // Overlapping items
-        tree.insert(Arc::new(MockItem::new(22, 24)));
-        tree.insert(Arc::new(MockItem::new(23, 25)));
-        let x24_26 = Arc::new(MockItem::new(24, 26));
-        tree.insert(Arc::clone(&x24_26));
-        let x26_28 = Arc::new(MockItem::new(26, 28));
-        tree.insert(Arc::clone(&x26_28));
-        tree.insert(Arc::new(MockItem::new(25, 27)));
-
-        assert_search(&tree, 22, &["22-24"]);
-        assert_search(&tree, 23, &["22-24", "23-25"]);
-        assert_search(&tree, 24, &["23-25", "24-26"]);
-        assert_search(&tree, 25, &["24-26", "25-27"]);
-        assert_search(&tree, 26, &["25-27", "26-28"]);
-        assert_search(&tree, 27, &["26-28"]);
-        assert_search(&tree, 28, &["26-28"]);
-        assert_search(&tree, 29, &["26-28"]);
-
-        tree.remove(&x24_26);
-        tree.remove(&x26_28);
-        assert_search(&tree, 23, &["22-24", "23-25"]);
-        assert_search(&tree, 24, &["23-25"]);
-        assert_search(&tree, 25, &["25-27"]);
-        assert_search(&tree, 26, &["25-27"]);
-        assert_search(&tree, 27, &["25-27"]);
-        assert_search(&tree, 28, &["25-27"]);
-        assert_search(&tree, 29, &["25-27"]);
-    }
-
-    #[test]
-    fn test_interval_tree_nested() {
-        let mut tree: IntervalTree<MockItem> = IntervalTree::default();
-
-        // Items containing other items
-        tree.insert(Arc::new(MockItem::new(31, 39)));
-        tree.insert(Arc::new(MockItem::new(32, 34)));
-        tree.insert(Arc::new(MockItem::new(33, 35)));
-        tree.insert(Arc::new(MockItem::new(30, 40)));
-
-        assert_search(&tree, 30, &["30-40"]);
-        assert_search(&tree, 31, &["30-40", "31-39"]);
-        assert_search(&tree, 32, &["30-40", "32-34", "31-39"]);
-        assert_search(&tree, 33, &["30-40", "32-34", "33-35", "31-39"]);
-        assert_search(&tree, 34, &["30-40", "33-35", "31-39"]);
-        assert_search(&tree, 35, &["30-40", "31-39"]);
-        assert_search(&tree, 36, &["30-40", "31-39"]);
-        assert_search(&tree, 37, &["30-40", "31-39"]);
-        assert_search(&tree, 38, &["30-40", "31-39"]);
-        assert_search(&tree, 39, &["30-40"]);
-        assert_search(&tree, 40, &["30-40"]);
-        assert_search(&tree, 41, &["30-40"]);
-    }
-
-    #[test]
-    fn test_interval_tree_duplicates() {
-        let mut tree: IntervalTree<MockItem> = IntervalTree::default();
-
-        // Duplicate keys
-        let item_a = Arc::new(MockItem::new_str(55, 56, "a"));
-        tree.insert(Arc::clone(&item_a));
-        let item_b = Arc::new(MockItem::new_str(55, 56, "b"));
-        tree.insert(Arc::clone(&item_b));
-        let item_c = Arc::new(MockItem::new_str(55, 56, "c"));
-        tree.insert(Arc::clone(&item_c));
-        let item_d = Arc::new(MockItem::new_str(54, 56, "d"));
-        tree.insert(Arc::clone(&item_d));
-        let item_e = Arc::new(MockItem::new_str(55, 57, "e"));
-        tree.insert(Arc::clone(&item_e));
-
-        dump_tree(&tree);
-
-        assert_search(
-            &tree,
-            55,
-            &["55-56: a", "55-56: b", "55-56: c", "54-56: d", "55-57: e"],
-        );
-        tree.remove(&item_b);
-        dump_tree(&tree);
-
-        assert_contents(&tree, &["54-56: d", "55-56: a", "55-56: c", "55-57: e"]);
-
-        tree.remove(&item_d);
-        dump_tree(&tree);
-        assert_contents(&tree, &["55-56: a", "55-56: c", "55-57: e"]);
-    }
-
-    #[test]
-    #[should_panic]
-    fn test_interval_tree_insert_twice() {
-        let mut tree: IntervalTree<MockItem> = IntervalTree::default();
-
-        // Inserting the same item twice is not cool
-        let item = Arc::new(MockItem::new(1, 2));
-        tree.insert(Arc::clone(&item));
-        tree.insert(Arc::clone(&item)); // fails assertion
-    }
-}

pageserver/src/layered_repository/layer_map.rs

@@ -1,483 +0,0 @@
-//!
-//! The layer map tracks what layers exist for all the relishes in a timeline.
-//!
-//! When the timeline is first accessed, the server lists of all layer files
-//! in the timelines/<timelineid> directory, and populates this map with
-//! ImageLayer and DeltaLayer structs corresponding to each file. When new WAL
-//! is received, we create InMemoryLayers to hold the incoming records. Now and
-//! then, in the checkpoint() function, the in-memory layers are frozen, forming
-//! new image and delta layers and corresponding files are written to disk.
-//!
-
-use crate::layered_repository::interval_tree::{IntervalItem, IntervalIter, IntervalTree};
-use crate::layered_repository::storage_layer::{Layer, SegmentTag};
-use crate::layered_repository::InMemoryLayer;
-use crate::relish::*;
-use anyhow::Result;
-use lazy_static::lazy_static;
-use std::cmp::Ordering;
-use std::collections::{BinaryHeap, HashMap};
-use std::sync::Arc;
-use zenith_metrics::{register_int_gauge, IntGauge};
-use zenith_utils::lsn::Lsn;
-
-use super::global_layer_map::{LayerId, GLOBAL_LAYER_MAP};
-
-lazy_static! {
-    static ref NUM_INMEMORY_LAYERS: IntGauge =
-        register_int_gauge!("pageserver_inmemory_layers", "Number of layers in memory")
-            .expect("failed to define a metric");
-    static ref NUM_ONDISK_LAYERS: IntGauge =
-        register_int_gauge!("pageserver_ondisk_layers", "Number of layers on-disk")
-            .expect("failed to define a metric");
-}
-
-///
-/// LayerMap tracks what layers exist on a timeline.
-///
-#[derive(Default)]
-pub struct LayerMap {
-    /// All the layers keyed by segment tag
-    segs: HashMap<SegmentTag, SegEntry>,
-
-    /// All in-memory layers, ordered by 'oldest_pending_lsn' and generation
-    /// of each layer. This allows easy access to the in-memory layer that
-    /// contains the oldest WAL record.
-    open_layers: BinaryHeap<OpenLayerEntry>,
-
-    /// Generation number, used to distinguish newly inserted entries in the
-    /// binary heap from older entries during checkpoint.
-    current_generation: u64,
-}
-
-impl LayerMap {
-    ///
-    /// Look up a layer using the given segment tag and LSN. This differs from a
-    /// plain key-value lookup in that if there is any layer that covers the
-    /// given LSN, or precedes the given LSN, it is returned. In other words,
-    /// you don't need to know the exact start LSN of the layer.
-    ///
-    pub fn get(&self, tag: &SegmentTag, lsn: Lsn) -> Option<Arc<dyn Layer>> {
-        let segentry = self.segs.get(tag)?;
-
-        segentry.get(lsn)
-    }
-
-    ///
-    /// Get the open layer for given segment for writing. Or None if no open
-    /// layer exists.
-    ///
-    pub fn get_open(&self, tag: &SegmentTag) -> Option<Arc<InMemoryLayer>> {
-        let segentry = self.segs.get(tag)?;
-
-        segentry
-            .open_layer_id
-            .and_then(|layer_id| GLOBAL_LAYER_MAP.read().unwrap().get(&layer_id))
-    }
-
-    ///
-    /// Insert an open in-memory layer
-    ///
-    pub fn insert_open(&mut self, layer: Arc<InMemoryLayer>) {
-        let segentry = self.segs.entry(layer.get_seg_tag()).or_default();
-
-        let layer_id = segentry.update_open(Arc::clone(&layer));
-
-        let oldest_pending_lsn = layer.get_oldest_pending_lsn();
-
-        // After a crash and restart, 'oldest_pending_lsn' of the oldest in-memory
-        // layer becomes the WAL streaming starting point, so it better not point
-        // in the middle of a WAL record.
-        assert!(oldest_pending_lsn.is_aligned());
-
-        // Also add it to the binary heap
-        let open_layer_entry = OpenLayerEntry {
-            oldest_pending_lsn: layer.get_oldest_pending_lsn(),
-            layer_id,
-            generation: self.current_generation,
-        };
-        self.open_layers.push(open_layer_entry);
-
-        NUM_INMEMORY_LAYERS.inc();
-    }
-
-    /// Remove an open in-memory layer
-    pub fn remove_open(&mut self, layer_id: LayerId) {
-        // Note: we don't try to remove the entry from the binary heap.
-        // It will be removed lazily by peek_oldest_open() when it's made it to
-        // the top of the heap.
-
-        let layer_opt = {
-            let mut global_map = GLOBAL_LAYER_MAP.write().unwrap();
-            let layer_opt = global_map.get(&layer_id);
-            global_map.remove(&layer_id);
-            // TODO it's bad that a ref can still exist after being evicted from cache
-            layer_opt
-        };
-
-        if let Some(layer) = layer_opt {
-            let mut segentry = self.segs.get_mut(&layer.get_seg_tag()).unwrap();
-
-            if segentry.open_layer_id == Some(layer_id) {
-                // Also remove it from the SegEntry of this segment
-                segentry.open_layer_id = None;
-            } else {
-                // We could have already updated segentry.open for
-                // dropped (non-writeable) layer. This is fine.
-                assert!(!layer.is_writeable());
-                assert!(layer.is_dropped());
-            }
-
-            NUM_INMEMORY_LAYERS.dec();
-        }
-    }
-
-    ///
-    /// Insert an on-disk layer
-    ///
-    pub fn insert_historic(&mut self, layer: Arc<dyn Layer>) {
-        let segentry = self.segs.entry(layer.get_seg_tag()).or_default();
-        segentry.insert_historic(layer);
-
-        NUM_ONDISK_LAYERS.inc();
-    }
-
-    ///
-    /// Remove an on-disk layer from the map.
-    ///
-    /// This should be called when the corresponding file on disk has been deleted.
-    ///
-    pub fn remove_historic(&mut self, layer: Arc<dyn Layer>) {
-        let tag = layer.get_seg_tag();
-
-        if let Some(segentry) = self.segs.get_mut(&tag) {
-            segentry.historic.remove(&layer);
-        }
-        NUM_ONDISK_LAYERS.dec();
-    }
-
-    // List relations along with a flag that marks if they exist at the given lsn.
-    // spcnode 0 and dbnode 0 have special meanings and mean all tabespaces/databases.
-    // Pass Tag if we're only interested in some relations.
-    pub fn list_relishes(&self, tag: Option<RelTag>, lsn: Lsn) -> Result<HashMap<RelishTag, bool>> {
-        let mut rels: HashMap<RelishTag, bool> = HashMap::new();
-
-        for (seg, segentry) in self.segs.iter() {
-            match seg.rel {
-                RelishTag::Relation(reltag) => {
-                    if let Some(request_rel) = tag {
-                        if (request_rel.spcnode == 0 || reltag.spcnode == request_rel.spcnode)
-                            && (request_rel.dbnode == 0 || reltag.dbnode == request_rel.dbnode)
-                        {
-                            if let Some(exists) = segentry.exists_at_lsn(lsn)? {
-                                rels.insert(seg.rel, exists);
-                            }
-                        }
-                    }
-                }
-                _ => {
-                    if tag == None {
-                        if let Some(exists) = segentry.exists_at_lsn(lsn)? {
-                            rels.insert(seg.rel, exists);
-                        }
-                    }
-                }
-            }
-        }
-        Ok(rels)
-    }
-
-    /// Is there a newer image layer for given segment?
-    ///
-    /// This is used for garbage collection, to determine if an old layer can
-    /// be deleted.
-    pub fn newer_image_layer_exists(&self, seg: SegmentTag, lsn: Lsn) -> bool {
-        if let Some(segentry) = self.segs.get(&seg) {
-            segentry.newer_image_layer_exists(lsn)
-        } else {
-            false
-        }
-    }
-
-    /// Is there any layer for given segment that is alive at the lsn?
-    ///
-    /// This is a public wrapper for SegEntry fucntion,
-    /// used for garbage collection, to determine if some alive layer
-    /// exists at the lsn. If so, we shouldn't delete a newer dropped layer
-    /// to avoid incorrectly making it visible.
-    pub fn layer_exists_at_lsn(&self, seg: SegmentTag, lsn: Lsn) -> Result<bool> {
-        Ok(if let Some(segentry) = self.segs.get(&seg) {
-            segentry.exists_at_lsn(lsn)?.unwrap_or(false)
-        } else {
-            false
-        })
-    }
-
-    /// Return the oldest in-memory layer, along with its generation number.
-    pub fn peek_oldest_open(&mut self) -> Option<(LayerId, Arc<InMemoryLayer>, u64)> {
-        let global_map = GLOBAL_LAYER_MAP.read().unwrap();
-
-        while let Some(oldest_entry) = self.open_layers.peek() {
-            if let Some(layer) = global_map.get(&oldest_entry.layer_id) {
-                return Some((oldest_entry.layer_id, layer, oldest_entry.generation));
-            } else {
-                self.open_layers.pop();
-            }
-        }
-        None
-    }
-
-    /// Increment the generation number used to stamp open in-memory layers. Layers
-    /// added with `insert_open` after this call will be associated with the new
-    /// generation. Returns the new generation number.
-    pub fn increment_generation(&mut self) -> u64 {
-        self.current_generation += 1;
-        self.current_generation
-    }
-
-    pub fn iter_historic_layers(&self) -> HistoricLayerIter {
-        HistoricLayerIter {
-            seg_iter: self.segs.iter(),
-            iter: None,
-        }
-    }
-
-    /// debugging function to print out the contents of the layer map
-    #[allow(unused)]
-    pub fn dump(&self) -> Result<()> {
-        println!("Begin dump LayerMap");
-        for (seg, segentry) in self.segs.iter() {
-            if let Some(open) = &segentry.open_layer_id {
-                if let Some(layer) = GLOBAL_LAYER_MAP.read().unwrap().get(open) {
-                    layer.dump()?;
-                } else {
-                    println!("layer not found in global map");
-                }
-            }
-
-            for layer in segentry.historic.iter() {
-                layer.dump()?;
-            }
-        }
-        println!("End dump LayerMap");
-        Ok(())
-    }
-}
-
-impl IntervalItem for dyn Layer {
-    type Key = Lsn;
-
-    fn start_key(&self) -> Lsn {
-        self.get_start_lsn()
-    }
-    fn end_key(&self) -> Lsn {
-        self.get_end_lsn()
-    }
-}
-
-///
-/// Per-segment entry in the LayerMap::segs hash map. Holds all the layers
-/// associated with the segment.
-///
-/// The last layer that is open for writes is always an InMemoryLayer,
-/// and is kept in a separate field, because there can be only one for
-/// each segment. The older layers, stored on disk, are kept in an
-/// IntervalTree.
-#[derive(Default)]
-struct SegEntry {
-    open_layer_id: Option<LayerId>,
-    historic: IntervalTree<dyn Layer>,
-}
-
-impl SegEntry {
-    /// Does the segment exist at given LSN?
-    /// Return None if object is not found in this SegEntry.
-    fn exists_at_lsn(&self, lsn: Lsn) -> Result<Option<bool>> {
-        if let Some(layer) = self.get(lsn) {
-            Ok(Some(layer.get_seg_exists(lsn)?))
-        } else {
-            Ok(None)
-        }
-    }
-
-    pub fn get(&self, lsn: Lsn) -> Option<Arc<dyn Layer>> {
-        if let Some(open_layer_id) = &self.open_layer_id {
-            let open_layer = GLOBAL_LAYER_MAP.read().unwrap().get(open_layer_id)?;
-            if open_layer.get_start_lsn() <= lsn {
-                return Some(open_layer);
-            }
-        }
-
-        self.historic.search(lsn)
-    }
-
-    pub fn newer_image_layer_exists(&self, lsn: Lsn) -> bool {
-        // We only check on-disk layers, because
-        // in-memory layers are not durable
-
-        self.historic
-            .iter_newer(lsn)
-            .any(|layer| !layer.is_incremental())
-    }
-
-    // Set new open layer for a SegEntry.
-    // It's ok to rewrite previous open layer,
-    // but only if it is not writeable anymore.
-    pub fn update_open(&mut self, layer: Arc<InMemoryLayer>) -> LayerId {
-        if let Some(prev_open_layer_id) = &self.open_layer_id {
-            if let Some(prev_open_layer) = GLOBAL_LAYER_MAP.read().unwrap().get(prev_open_layer_id)
-            {
-                assert!(!prev_open_layer.is_writeable());
-            }
-        }
-        let open_layer_id = GLOBAL_LAYER_MAP.write().unwrap().insert(layer);
-        self.open_layer_id = Some(open_layer_id);
-        open_layer_id
-    }
-
-    pub fn insert_historic(&mut self, layer: Arc<dyn Layer>) {
-        self.historic.insert(layer);
-    }
-}
-
-/// Entry held in LayerMap::open_layers, with boilerplate comparison routines
-/// to implement a min-heap ordered by 'oldest_pending_lsn' and 'generation'
-///
-/// The generation number associated with each entry can be used to distinguish
-/// recently-added entries (i.e after last call to increment_generation()) from older
-/// entries with the same 'oldest_pending_lsn'.
-struct OpenLayerEntry {
-    oldest_pending_lsn: Lsn, // copy of layer.get_oldest_pending_lsn()
-    generation: u64,
-    layer_id: LayerId,
-}
-impl Ord for OpenLayerEntry {
-    fn cmp(&self, other: &Self) -> Ordering {
-        // BinaryHeap is a max-heap, and we want a min-heap. Reverse the ordering here
-        // to get that. Entries with identical oldest_pending_lsn are ordered by generation
-        other
-            .oldest_pending_lsn
-            .cmp(&self.oldest_pending_lsn)
-            .then_with(|| other.generation.cmp(&self.generation))
-    }
-}
-impl PartialOrd for OpenLayerEntry {
-    fn partial_cmp(&self, other: &Self) -> Option<Ordering> {
-        Some(self.cmp(other))
-    }
-}
-impl PartialEq for OpenLayerEntry {
-    fn eq(&self, other: &Self) -> bool {
-        self.cmp(other) == Ordering::Equal
-    }
-}
-impl Eq for OpenLayerEntry {}
-
-/// Iterator returned by LayerMap::iter_historic_layers()
-pub struct HistoricLayerIter<'a> {
-    seg_iter: std::collections::hash_map::Iter<'a, SegmentTag, SegEntry>,
-    iter: Option<IntervalIter<'a, dyn Layer>>,
-}
-
-impl<'a> Iterator for HistoricLayerIter<'a> {
-    type Item = Arc<dyn Layer>;
-
-    fn next(&mut self) -> std::option::Option<<Self as std::iter::Iterator>::Item> {
-        loop {
-            if let Some(x) = &mut self.iter {
-                if let Some(x) = x.next() {
-                    return Some(Arc::clone(&x));
-                }
-            }
-            if let Some((_tag, segentry)) = self.seg_iter.next() {
-                self.iter = Some(segentry.historic.iter());
-                continue;
-            } else {
-                return None;
-            }
-        }
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use crate::PageServerConf;
-    use std::str::FromStr;
-    use zenith_utils::zid::{ZTenantId, ZTimelineId};
-
-    /// Arbitrary relation tag, for testing.
-    const TESTREL_A: RelishTag = RelishTag::Relation(RelTag {
-        spcnode: 0,
-        dbnode: 111,
-        relnode: 1000,
-        forknum: 0,
-    });
-
-    lazy_static! {
-        static ref DUMMY_TIMELINEID: ZTimelineId =
-            ZTimelineId::from_str("00000000000000000000000000000000").unwrap();
-        static ref DUMMY_TENANTID: ZTenantId =
-            ZTenantId::from_str("00000000000000000000000000000000").unwrap();
-    }
-
-    /// Construct a dummy InMemoryLayer for testing
-    fn dummy_inmem_layer(
-        conf: &'static PageServerConf,
-        segno: u32,
-        start_lsn: Lsn,
-        oldest_pending_lsn: Lsn,
-    ) -> Arc<InMemoryLayer> {
-        Arc::new(
-            InMemoryLayer::create(
-                conf,
-                *DUMMY_TIMELINEID,
-                *DUMMY_TENANTID,
-                SegmentTag {
-                    rel: TESTREL_A,
-                    segno,
-                },
-                start_lsn,
-                oldest_pending_lsn,
-            )
-            .unwrap(),
-        )
-    }
-
-    #[test]
-    fn test_open_layers() -> Result<()> {
-        let conf = PageServerConf::dummy_conf(PageServerConf::test_repo_dir("dummy_inmem_layer"));
-        let conf = Box::leak(Box::new(conf));
-        std::fs::create_dir_all(conf.timeline_path(&DUMMY_TIMELINEID, &DUMMY_TENANTID))?;
-
-        let mut layers = LayerMap::default();
-
-        let gen1 = layers.increment_generation();
-        layers.insert_open(dummy_inmem_layer(conf, 0, Lsn(0x100), Lsn(0x100)));
-        layers.insert_open(dummy_inmem_layer(conf, 1, Lsn(0x100), Lsn(0x200)));
-        layers.insert_open(dummy_inmem_layer(conf, 2, Lsn(0x100), Lsn(0x120)));
-        layers.insert_open(dummy_inmem_layer(conf, 3, Lsn(0x100), Lsn(0x110)));
-
-        let gen2 = layers.increment_generation();
-        layers.insert_open(dummy_inmem_layer(conf, 4, Lsn(0x100), Lsn(0x110)));
-        layers.insert_open(dummy_inmem_layer(conf, 5, Lsn(0x100), Lsn(0x100)));
-
-        // A helper function (closure) to pop the next oldest open entry from the layer map,
-        // and assert that it is what we'd expect
-        let mut assert_pop_layer = |expected_segno: u32, expected_generation: u64| {
-            let (layer_id, l, generation) = layers.peek_oldest_open().unwrap();
-            assert!(l.get_seg_tag().segno == expected_segno);
-            assert!(generation == expected_generation);
-            layers.remove_open(layer_id);
-        };
-
-        assert_pop_layer(0, gen1); // 0x100
-        assert_pop_layer(5, gen2); // 0x100
-        assert_pop_layer(3, gen1); // 0x110
-        assert_pop_layer(4, gen2); // 0x110
-        assert_pop_layer(2, gen1); // 0x120
-        assert_pop_layer(1, gen1); // 0x200
-
-        Ok(())
-    }
-}

pageserver/src/layered_repository/metadata.rs

@@ -1,226 +0,0 @@
-//! Every image of a certain timeline from [`crate::layered_repository::LayeredRepository`]
-//! has a metadata that needs to be stored persistently.
-//!
-//! Later, the file gets is used in [`crate::remote_storage::storage_sync`] as a part of
-//! external storage import and export operations.
-//!
-//! The module contains all structs and related helper methods related to timeline metadata.
-
-use std::{convert::TryInto, path::PathBuf};
-
-use anyhow::ensure;
-use zenith_utils::{
-    bin_ser::BeSer,
-    lsn::Lsn,
-    zid::{ZTenantId, ZTimelineId},
-};
-
-use crate::{
-    layered_repository::{METADATA_CHECKSUM_SIZE, METADATA_MAX_DATA_SIZE, METADATA_MAX_SAFE_SIZE},
-    PageServerConf,
-};
-
-/// The name of the metadata file pageserver creates per timeline.
-pub const METADATA_FILE_NAME: &str = "metadata";
-
-/// Metadata stored on disk for each timeline
-///
-/// The fields correspond to the values we hold in memory, in LayeredTimeline.
-#[derive(Debug, Clone, PartialEq, Eq, PartialOrd, Ord)]
-pub struct TimelineMetadata {
-    disk_consistent_lsn: Lsn,
-    // This is only set if we know it. We track it in memory when the page
-    // server is running, but we only track the value corresponding to
-    // 'last_record_lsn', not 'disk_consistent_lsn' which can lag behind by a
-    // lot. We only store it in the metadata file when we flush *all* the
-    // in-memory data so that 'last_record_lsn' is the same as
-    // 'disk_consistent_lsn'.  That's OK, because after page server restart, as
-    // soon as we reprocess at least one record, we will have a valid
-    // 'prev_record_lsn' value in memory again. This is only really needed when
-    // doing a clean shutdown, so that there is no more WAL beyond
-    // 'disk_consistent_lsn'
-    prev_record_lsn: Option<Lsn>,
-    ancestor_timeline: Option<ZTimelineId>,
-    ancestor_lsn: Lsn,
-    latest_gc_cutoff_lsn: Lsn,
-    initdb_lsn: Lsn,
-}
-
-/// Points to a place in pageserver's local directory,
-/// where certain timeline's metadata file should be located.
-pub fn metadata_path(
-    conf: &'static PageServerConf,
-    timelineid: ZTimelineId,
-    tenantid: ZTenantId,
-) -> PathBuf {
-    conf.timeline_path(&timelineid, &tenantid)
-        .join(METADATA_FILE_NAME)
-}
-
-impl TimelineMetadata {
-    pub fn new(
-        disk_consistent_lsn: Lsn,
-        prev_record_lsn: Option<Lsn>,
-        ancestor_timeline: Option<ZTimelineId>,
-        ancestor_lsn: Lsn,
-        latest_gc_cutoff_lsn: Lsn,
-        initdb_lsn: Lsn,
-    ) -> Self {
-        Self {
-            disk_consistent_lsn,
-            prev_record_lsn,
-            ancestor_timeline,
-            ancestor_lsn,
-            latest_gc_cutoff_lsn,
-            initdb_lsn,
-        }
-    }
-
-    pub fn from_bytes(metadata_bytes: &[u8]) -> anyhow::Result<Self> {
-        ensure!(
-            metadata_bytes.len() == METADATA_MAX_SAFE_SIZE,
-            "metadata bytes size is wrong"
-        );
-
-        let data = &metadata_bytes[..METADATA_MAX_DATA_SIZE];
-        let calculated_checksum = crc32c::crc32c(data);
-
-        let checksum_bytes: &[u8; METADATA_CHECKSUM_SIZE] =
-            metadata_bytes[METADATA_MAX_DATA_SIZE..].try_into()?;
-        let expected_checksum = u32::from_le_bytes(*checksum_bytes);
-        ensure!(
-            calculated_checksum == expected_checksum,
-            "metadata checksum mismatch"
-        );
-
-        let data = TimelineMetadata::from(serialize::DeTimelineMetadata::des_prefix(data)?);
-        assert!(data.disk_consistent_lsn.is_aligned());
-
-        Ok(data)
-    }
-
-    pub fn to_bytes(&self) -> anyhow::Result<Vec<u8>> {
-        let serializeable_metadata = serialize::SeTimelineMetadata::from(self);
-        let mut metadata_bytes = serialize::SeTimelineMetadata::ser(&serializeable_metadata)?;
-        assert!(metadata_bytes.len() <= METADATA_MAX_DATA_SIZE);
-        metadata_bytes.resize(METADATA_MAX_SAFE_SIZE, 0u8);
-
-        let checksum = crc32c::crc32c(&metadata_bytes[..METADATA_MAX_DATA_SIZE]);
-        metadata_bytes[METADATA_MAX_DATA_SIZE..].copy_from_slice(&u32::to_le_bytes(checksum));
-        Ok(metadata_bytes)
-    }
-
-    /// [`Lsn`] that corresponds to the corresponding timeline directory
-    /// contents, stored locally in the pageserver workdir.
-    pub fn disk_consistent_lsn(&self) -> Lsn {
-        self.disk_consistent_lsn
-    }
-
-    pub fn prev_record_lsn(&self) -> Option<Lsn> {
-        self.prev_record_lsn
-    }
-
-    pub fn ancestor_timeline(&self) -> Option<ZTimelineId> {
-        self.ancestor_timeline
-    }
-
-    pub fn ancestor_lsn(&self) -> Lsn {
-        self.ancestor_lsn
-    }
-
-    pub fn latest_gc_cutoff_lsn(&self) -> Lsn {
-        self.latest_gc_cutoff_lsn
-    }
-
-    pub fn initdb_lsn(&self) -> Lsn {
-        self.initdb_lsn
-    }
-}
-
-/// This module is for direct conversion of metadata to bytes and back.
-/// For a certain metadata, besides the conversion a few verification steps has to
-/// be done, so all serde derives are hidden from the user, to avoid accidental
-/// verification-less metadata creation.
-mod serialize {
-    use serde::{Deserialize, Serialize};
-    use zenith_utils::{lsn::Lsn, zid::ZTimelineId};
-
-    use super::TimelineMetadata;
-
-    #[derive(Serialize)]
-    pub(super) struct SeTimelineMetadata<'a> {
-        disk_consistent_lsn: &'a Lsn,
-        prev_record_lsn: &'a Option<Lsn>,
-        ancestor_timeline: &'a Option<ZTimelineId>,
-        ancestor_lsn: &'a Lsn,
-        latest_gc_cutoff_lsn: &'a Lsn,
-        initdb_lsn: &'a Lsn,
-    }
-
-    impl<'a> From<&'a TimelineMetadata> for SeTimelineMetadata<'a> {
-        fn from(other: &'a TimelineMetadata) -> Self {
-            Self {
-                disk_consistent_lsn: &other.disk_consistent_lsn,
-                prev_record_lsn: &other.prev_record_lsn,
-                ancestor_timeline: &other.ancestor_timeline,
-                ancestor_lsn: &other.ancestor_lsn,
-                latest_gc_cutoff_lsn: &other.latest_gc_cutoff_lsn,
-                initdb_lsn: &other.initdb_lsn,
-            }
-        }
-    }
-
-    #[derive(Deserialize)]
-    pub(super) struct DeTimelineMetadata {
-        disk_consistent_lsn: Lsn,
-        prev_record_lsn: Option<Lsn>,
-        ancestor_timeline: Option<ZTimelineId>,
-        ancestor_lsn: Lsn,
-        latest_gc_cutoff_lsn: Lsn,
-        initdb_lsn: Lsn,
-    }
-
-    impl From<DeTimelineMetadata> for TimelineMetadata {
-        fn from(other: DeTimelineMetadata) -> Self {
-            Self {
-                disk_consistent_lsn: other.disk_consistent_lsn,
-                prev_record_lsn: other.prev_record_lsn,
-                ancestor_timeline: other.ancestor_timeline,
-                ancestor_lsn: other.ancestor_lsn,
-                latest_gc_cutoff_lsn: other.latest_gc_cutoff_lsn,
-                initdb_lsn: other.initdb_lsn,
-            }
-        }
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use crate::repository::repo_harness::TIMELINE_ID;
-
-    use super::*;
-
-    #[test]
-    fn metadata_serializes_correctly() {
-        let original_metadata = TimelineMetadata {
-            disk_consistent_lsn: Lsn(0x200),
-            prev_record_lsn: Some(Lsn(0x100)),
-            ancestor_timeline: Some(TIMELINE_ID),
-            ancestor_lsn: Lsn(0),
-            latest_gc_cutoff_lsn: Lsn(0),
-            initdb_lsn: Lsn(0),
-        };
-
-        let metadata_bytes = original_metadata
-            .to_bytes()
-            .expect("Should serialize correct metadata to bytes");
-
-        let deserialized_metadata = TimelineMetadata::from_bytes(&metadata_bytes)
-            .expect("Should deserialize its own bytes");
-
-        assert_eq!(
-            deserialized_metadata, original_metadata,
-            "Metadata that was serialized to bytes and deserialized back should not change"
-        );
-    }
-}

pageserver/src/layered_repository/page_versions.rs

@@ -1,252 +0,0 @@
-//!
-//! Data structure to ingest incoming WAL into an append-only file.
-//!
-//! - The file is considered temporary, and will be discarded on crash
-//! - based on a B-tree
-//!
-
-use std::os::unix::fs::FileExt;
-use std::{collections::HashMap, ops::RangeBounds, slice};
-
-use anyhow::Result;
-
-use std::cmp::min;
-use std::io::Seek;
-
-use zenith_utils::{lsn::Lsn, vec_map::VecMap};
-
-use super::storage_layer::PageVersion;
-use crate::layered_repository::ephemeral_file::EphemeralFile;
-
-use zenith_utils::bin_ser::BeSer;
-
-const EMPTY_SLICE: &[(Lsn, u64)] = &[];
-
-pub struct PageVersions {
-    map: HashMap<u32, VecMap<Lsn, u64>>,
-
-    /// The PageVersion structs are stored in a serialized format in this file.
-    /// Each serialized PageVersion is preceded by a 'u32' length field.
-    /// The 'map' stores offsets into this file.
-    file: EphemeralFile,
-}
-
-impl PageVersions {
-    pub fn new(file: EphemeralFile) -> PageVersions {
-        PageVersions {
-            map: HashMap::new(),
-            file,
-        }
-    }
-
-    pub fn append_or_update_last(
-        &mut self,
-        blknum: u32,
-        lsn: Lsn,
-        page_version: PageVersion,
-    ) -> Result<Option<u64>> {
-        // remember starting position
-        let pos = self.file.stream_position()?;
-
-        // make room for the 'length' field by writing zeros as a placeholder.
-        self.file.seek(std::io::SeekFrom::Start(pos + 4)).unwrap();
-
-        page_version.ser_into(&mut self.file).unwrap();
-
-        // write the 'length' field.
-        let len = self.file.stream_position()? - pos - 4;
-        let lenbuf = u32::to_ne_bytes(len as u32);
-        self.file.write_all_at(&lenbuf, pos)?;
-
-        let map = self.map.entry(blknum).or_insert_with(VecMap::default);
-        Ok(map.append_or_update_last(lsn, pos as u64).unwrap().0)
-    }
-
-    /// Get all [`PageVersion`]s in a block
-    fn get_block_slice(&self, blknum: u32) -> &[(Lsn, u64)] {
-        self.map
-            .get(&blknum)
-            .map(VecMap::as_slice)
-            .unwrap_or(EMPTY_SLICE)
-    }
-
-    /// Get a range of [`PageVersions`] in a block
-    pub fn get_block_lsn_range<R: RangeBounds<Lsn>>(&self, blknum: u32, range: R) -> &[(Lsn, u64)] {
-        self.map
-            .get(&blknum)
-            .map(|vec_map| vec_map.slice_range(range))
-            .unwrap_or(EMPTY_SLICE)
-    }
-
-    /// Iterate through [`PageVersion`]s in (block, lsn) order.
-    /// If a [`cutoff_lsn`] is set, only show versions with `lsn < cutoff_lsn`
-    pub fn ordered_page_version_iter(&self, cutoff_lsn: Option<Lsn>) -> OrderedPageVersionIter<'_> {
-        let mut ordered_blocks: Vec<u32> = self.map.keys().cloned().collect();
-        ordered_blocks.sort_unstable();
-
-        let slice = ordered_blocks
-            .first()
-            .map(|&blknum| self.get_block_slice(blknum))
-            .unwrap_or(EMPTY_SLICE);
-
-        OrderedPageVersionIter {
-            page_versions: self,
-            ordered_blocks,
-            cur_block_idx: 0,
-            cutoff_lsn,
-            cur_slice_iter: slice.iter(),
-        }
-    }
-
-    /// Returns a 'Read' that reads the page version at given offset.
-    pub fn reader(&self, pos: u64) -> Result<PageVersionReader, std::io::Error> {
-        // read length
-        let mut lenbuf = [0u8; 4];
-        self.file.read_exact_at(&mut lenbuf, pos)?;
-        let len = u32::from_ne_bytes(lenbuf);
-
-        Ok(PageVersionReader {
-            file: &self.file,
-            pos: pos + 4,
-            end_pos: pos + 4 + len as u64,
-        })
-    }
-
-    pub fn get_page_version(&self, pos: u64) -> Result<PageVersion> {
-        let mut reader = self.reader(pos)?;
-        Ok(PageVersion::des_from(&mut reader)?)
-    }
-}
-
-pub struct PageVersionReader<'a> {
-    file: &'a EphemeralFile,
-    pos: u64,
-    end_pos: u64,
-}
-
-impl<'a> std::io::Read for PageVersionReader<'a> {
-    fn read(&mut self, buf: &mut [u8]) -> Result<usize, std::io::Error> {
-        let len = min(buf.len(), (self.end_pos - self.pos) as usize);
-        let n = self.file.read_at(&mut buf[..len], self.pos)?;
-        self.pos += n as u64;
-        Ok(n)
-    }
-}
-
-pub struct OrderedPageVersionIter<'a> {
-    page_versions: &'a PageVersions,
-
-    ordered_blocks: Vec<u32>,
-    cur_block_idx: usize,
-
-    cutoff_lsn: Option<Lsn>,
-
-    cur_slice_iter: slice::Iter<'a, (Lsn, u64)>,
-}
-
-impl OrderedPageVersionIter<'_> {
-    fn is_lsn_before_cutoff(&self, lsn: &Lsn) -> bool {
-        if let Some(cutoff_lsn) = self.cutoff_lsn.as_ref() {
-            lsn < cutoff_lsn
-        } else {
-            true
-        }
-    }
-}
-
-impl<'a> Iterator for OrderedPageVersionIter<'a> {
-    type Item = (u32, Lsn, u64);
-
-    fn next(&mut self) -> Option<Self::Item> {
-        loop {
-            if let Some((lsn, pos)) = self.cur_slice_iter.next() {
-                if self.is_lsn_before_cutoff(lsn) {
-                    let blknum = self.ordered_blocks[self.cur_block_idx];
-                    return Some((blknum, *lsn, *pos));
-                }
-            }
-
-            let next_block_idx = self.cur_block_idx + 1;
-            let blknum: u32 = *self.ordered_blocks.get(next_block_idx)?;
-            self.cur_block_idx = next_block_idx;
-            self.cur_slice_iter = self.page_versions.get_block_slice(blknum).iter();
-        }
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use bytes::Bytes;
-
-    use super::*;
-    use crate::PageServerConf;
-    use std::fs;
-    use std::str::FromStr;
-    use zenith_utils::zid::{ZTenantId, ZTimelineId};
-
-    fn repo_harness(test_name: &str) -> Result<(&'static PageServerConf, ZTenantId, ZTimelineId)> {
-        let repo_dir = PageServerConf::test_repo_dir(test_name);
-        let _ = fs::remove_dir_all(&repo_dir);
-        let conf = PageServerConf::dummy_conf(repo_dir);
-        // Make a static copy of the config. This can never be free'd, but that's
-        // OK in a test.
-        let conf: &'static PageServerConf = Box::leak(Box::new(conf));
-
-        let tenantid = ZTenantId::from_str("11000000000000000000000000000000").unwrap();
-        let timelineid = ZTimelineId::from_str("22000000000000000000000000000000").unwrap();
-        fs::create_dir_all(conf.timeline_path(&timelineid, &tenantid))?;
-
-        Ok((conf, tenantid, timelineid))
-    }
-
-    #[test]
-    fn test_ordered_iter() -> Result<()> {
-        let (conf, tenantid, timelineid) = repo_harness("test_ordered_iter")?;
-
-        let file = EphemeralFile::create(conf, tenantid, timelineid)?;
-
-        let mut page_versions = PageVersions::new(file);
-
-        const BLOCKS: u32 = 1000;
-        const LSNS: u64 = 50;
-
-        let empty_page = Bytes::from_static(&[0u8; 8192]);
-        let empty_page_version = PageVersion::Page(empty_page);
-
-        for blknum in 0..BLOCKS {
-            for lsn in 0..LSNS {
-                let old = page_versions.append_or_update_last(
-                    blknum,
-                    Lsn(lsn),
-                    empty_page_version.clone(),
-                )?;
-                assert!(old.is_none());
-            }
-        }
-
-        let mut iter = page_versions.ordered_page_version_iter(None);
-        for blknum in 0..BLOCKS {
-            for lsn in 0..LSNS {
-                let (actual_blknum, actual_lsn, _pv) = iter.next().unwrap();
-                assert_eq!(actual_blknum, blknum);
-                assert_eq!(Lsn(lsn), actual_lsn);
-            }
-        }
-        assert!(iter.next().is_none());
-        assert!(iter.next().is_none()); // should be robust against excessive next() calls
-
-        const CUTOFF_LSN: Lsn = Lsn(30);
-        let mut iter = page_versions.ordered_page_version_iter(Some(CUTOFF_LSN));
-        for blknum in 0..BLOCKS {
-            for lsn in 0..CUTOFF_LSN.0 {
-                let (actual_blknum, actual_lsn, _pv) = iter.next().unwrap();
-                assert_eq!(actual_blknum, blknum);
-                assert_eq!(Lsn(lsn), actual_lsn);
-            }
-        }
-        assert!(iter.next().is_none());
-        assert!(iter.next().is_none()); // should be robust against excessive next() calls
-
-        Ok(())
-    }
-}

pageserver/src/layered_repository/storage_layer.rs

@@ -1,172 +0,0 @@
-//!
-//! Common traits and structs for layers
-//!
-
-use crate::relish::RelishTag;
-use crate::repository::WALRecord;
-use crate::{ZTenantId, ZTimelineId};
-use anyhow::Result;
-use bytes::Bytes;
-use serde::{Deserialize, Serialize};
-use std::fmt;
-use std::path::PathBuf;
-
-use zenith_utils::lsn::Lsn;
-
-// Size of one segment in pages (10 MB)
-pub const RELISH_SEG_SIZE: u32 = 10 * 1024 * 1024 / 8192;
-
-///
-/// Each relish stored in the repository is divided into fixed-sized "segments",
-/// with 10 MB of key-space, or 1280 8k pages each.
-///
-#[derive(Debug, PartialEq, Eq, PartialOrd, Hash, Ord, Clone, Copy, Serialize, Deserialize)]
-pub struct SegmentTag {
-    pub rel: RelishTag,
-    pub segno: u32,
-}
-
-impl fmt::Display for SegmentTag {
-    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
-        write!(f, "{}.{}", self.rel, self.segno)
-    }
-}
-
-impl SegmentTag {
-    pub const fn from_blknum(rel: RelishTag, blknum: u32) -> SegmentTag {
-        SegmentTag {
-            rel,
-            segno: blknum / RELISH_SEG_SIZE,
-        }
-    }
-
-    pub fn blknum_in_seg(&self, blknum: u32) -> bool {
-        blknum / RELISH_SEG_SIZE == self.segno
-    }
-}
-
-///
-/// Represents a version of a page at a specific LSN. The LSN is the key of the
-/// entry in the 'page_versions' hash, it is not duplicated here.
-///
-/// A page version can be stored as a full page image, or as WAL record that needs
-/// to be applied over the previous page version to reconstruct this version.
-#[derive(Debug, Clone, Serialize, Deserialize)]
-pub enum PageVersion {
-    Page(Bytes),
-    Wal(WALRecord),
-}
-
-///
-/// Data needed to reconstruct a page version
-///
-/// 'page_img' is the old base image of the page to start the WAL replay with.
-/// It can be None, if the first WAL record initializes the page (will_init)
-/// 'records' contains the records to apply over the base image.
-///
-pub struct PageReconstructData {
-    pub records: Vec<(Lsn, WALRecord)>,
-    pub page_img: Option<Bytes>,
-}
-
-/// Return value from Layer::get_page_reconstruct_data
-pub enum PageReconstructResult {
-    /// Got all the data needed to reconstruct the requested page
-    Complete,
-    /// This layer didn't contain all the required data, the caller should look up
-    /// the predecessor layer at the returned LSN and collect more data from there.
-    Continue(Lsn),
-    /// This layer didn't contain data needed to reconstruct the page version at
-    /// the returned LSN. This is usually considered an error, but might be OK
-    /// in some circumstances.
-    Missing(Lsn),
-    /// Use the cached image at `cached_img_lsn` as the base image
-    Cached,
-}
-
-///
-/// A Layer corresponds to one RELISH_SEG_SIZE slice of a relish in a range of LSNs.
-/// There are two kinds of layers, in-memory and on-disk layers. In-memory
-/// layers are used to ingest incoming WAL, and provide fast access
-/// to the recent page versions. On-disk layers are stored as files on disk, and
-/// are immutable. This trait presents the common functionality of
-/// in-memory and on-disk layers.
-///
-pub trait Layer: Send + Sync {
-    fn get_tenant_id(&self) -> ZTenantId;
-
-    /// Identify the timeline this relish belongs to
-    fn get_timeline_id(&self) -> ZTimelineId;
-
-    /// Identify the relish segment
-    fn get_seg_tag(&self) -> SegmentTag;
-
-    /// Inclusive start bound of the LSN range that this layer holds
-    fn get_start_lsn(&self) -> Lsn;
-
-    /// Exclusive end bound of the LSN range that this layer holds.
-    ///
-    /// - For an open in-memory layer, this is MAX_LSN.
-    /// - For a frozen in-memory layer or a delta layer, this is a valid end bound.
-    /// - An image layer represents snapshot at one LSN, so end_lsn is always the snapshot LSN + 1
-    fn get_end_lsn(&self) -> Lsn;
-
-    /// Is the segment represented by this layer dropped by PostgreSQL?
-    fn is_dropped(&self) -> bool;
-
-    /// Filename used to store this layer on disk. (Even in-memory layers
-    /// implement this, to print a handy unique identifier for the layer for
-    /// log messages, even though they're never not on disk.)
-    fn filename(&self) -> PathBuf;
-
-    ///
-    /// Return data needed to reconstruct given page at LSN.
-    ///
-    /// It is up to the caller to collect more data from previous layer and
-    /// perform WAL redo, if necessary.
-    ///
-    /// Note that the 'blknum' is the offset of the page from the beginning
-    /// of the *relish*, not the beginning of the segment. The requested
-    /// 'blknum' must be covered by this segment.
-    ///
-    /// `cached_img_lsn` should be set to a cached page image's lsn < `lsn`.
-    /// This function will only return data after `cached_img_lsn`.
-    ///
-    /// See PageReconstructResult for possible return values. The collected data
-    /// is appended to reconstruct_data; the caller should pass an empty struct
-    /// on first call. If this returns PageReconstructResult::Continue, look up
-    /// the predecessor layer and call again with the same 'reconstruct_data'
-    /// to collect more data.
-    fn get_page_reconstruct_data(
-        &self,
-        blknum: u32,
-        lsn: Lsn,
-        cached_img_lsn: Option<Lsn>,
-        reconstruct_data: &mut PageReconstructData,
-    ) -> Result<PageReconstructResult>;
-
-    /// Return size of the segment at given LSN. (Only for blocky relations.)
-    fn get_seg_size(&self, lsn: Lsn) -> Result<u32>;
-
-    /// Does the segment exist at given LSN? Or was it dropped before it.
-    fn get_seg_exists(&self, lsn: Lsn) -> Result<bool>;
-
-    /// Does this layer only contain some data for the segment (incremental),
-    /// or does it contain a version of every page? This is important to know
-    /// for garbage collecting old layers: an incremental layer depends on
-    /// the previous non-incremental layer.
-    fn is_incremental(&self) -> bool;
-
-    /// Returns true for layers that are represented in memory.
-    fn is_in_memory(&self) -> bool;
-
-    /// Release memory used by this layer. There is no corresponding 'load'
-    /// function, that's done implicitly when you call one of the get-functions.
-    fn unload(&self) -> Result<()>;
-
-    /// Permanently remove this layer from disk.
-    fn delete(&self) -> Result<()>;
-
-    /// Dump summary of the contents of the layer to stdout
-    fn dump(&self) -> Result<()>;
-}

pageserver/src/lib.rs

@@ -1,233 +1,94 @@
-use layered_repository::{TENANTS_SEGMENT_NAME, TIMELINES_SEGMENT_NAME};
-use zenith_utils::postgres_backend::AuthType;
-use zenith_utils::zid::{ZTenantId, ZTimelineId};
-
-use std::num::{NonZeroU32, NonZeroUsize};
+use std::fmt;
+use std::net::SocketAddr;
 use std::path::PathBuf;
+use std::str::FromStr;
 use std::time::Duration;
 
-use lazy_static::lazy_static;
-use zenith_metrics::{register_int_gauge_vec, IntGaugeVec};
-
 pub mod basebackup;
-pub mod branches;
-pub mod http;
-pub mod layered_repository;
 pub mod page_cache;
 pub mod page_service;
-pub mod relish;
-pub mod remote_storage;
-pub mod repository;
 pub mod restore_local_repo;
-pub mod tenant_mgr;
-pub mod tenant_threads;
-pub mod virtual_file;
+pub mod tui;
+pub mod tui_event;
+mod tui_logger;
 pub mod waldecoder;
 pub mod walreceiver;
 pub mod walredo;
 
-pub mod defaults {
-    use const_format::formatcp;
-    use std::time::Duration;
-
-    pub const DEFAULT_PG_LISTEN_PORT: u16 = 64000;
-    pub const DEFAULT_PG_LISTEN_ADDR: &str = formatcp!("127.0.0.1:{DEFAULT_PG_LISTEN_PORT}");
-    pub const DEFAULT_HTTP_LISTEN_PORT: u16 = 9898;
-    pub const DEFAULT_HTTP_LISTEN_ADDR: &str = formatcp!("127.0.0.1:{DEFAULT_HTTP_LISTEN_PORT}");
-
-    // FIXME: This current value is very low. I would imagine something like 1 GB or 10 GB
-    // would be more appropriate. But a low value forces the code to be exercised more,
-    // which is good for now to trigger bugs.
-    pub const DEFAULT_CHECKPOINT_DISTANCE: u64 = 256 * 1024 * 1024;
-    pub const DEFAULT_CHECKPOINT_PERIOD: Duration = Duration::from_secs(10);
-
-    pub const DEFAULT_GC_HORIZON: u64 = 64 * 1024 * 1024;
-    pub const DEFAULT_GC_PERIOD: Duration = Duration::from_secs(10);
-
-    pub const DEFAULT_SUPERUSER: &str = "zenith_admin";
-    pub const DEFAULT_REMOTE_STORAGE_MAX_CONCURRENT_SYNC: usize = 100;
-    pub const DEFAULT_REMOTE_STORAGE_MAX_SYNC_ERRORS: u32 = 10;
-
-    pub const DEFAULT_OPEN_MEM_LIMIT: usize = 128 * 1024 * 1024;
-    pub const DEFAULT_PAGE_CACHE_SIZE: usize = 8192;
-    pub const DEFAULT_MAX_FILE_DESCRIPTORS: usize = 100;
-}
-
-lazy_static! {
-    static ref LIVE_CONNECTIONS_COUNT: IntGaugeVec = register_int_gauge_vec!(
-        "pageserver_live_connections_count",
-        "Number of live network connections",
-        &["pageserver_connection_kind"]
-    )
-    .expect("failed to define a metric");
-}
-
-pub const LOG_FILE_NAME: &str = "pageserver.log";
-
 #[derive(Debug, Clone)]
 pub struct PageServerConf {
     pub daemonize: bool,
-    pub listen_pg_addr: String,
-    pub listen_http_addr: String,
-    // Flush out an inmemory layer, if it's holding WAL older than this
-    // This puts a backstop on how much WAL needs to be re-digested if the
-    // page server crashes.
-    pub checkpoint_distance: u64,
-    pub checkpoint_period: Duration,
-
+    pub interactive: bool,
+    pub listen_addr: SocketAddr,
     pub gc_horizon: u64,
     pub gc_period: Duration,
-    pub superuser: String,
-
-    pub open_mem_limit: usize,
-    pub page_cache_size: usize,
-    pub max_file_descriptors: usize,
-
-    // Repository directory, relative to current working directory.
-    // Normally, the page server changes the current working directory
-    // to the repository, and 'workdir' is always '.'. But we don't do
-    // that during unit testing, because the current directory is global
-    // to the process but different unit tests work on different
-    // repositories.
-    pub workdir: PathBuf,
-
-    pub pg_distrib_dir: PathBuf,
-
-    pub auth_type: AuthType,
-
-    pub auth_validation_public_key_path: Option<PathBuf>,
-    pub remote_storage_config: Option<RemoteStorageConfig>,
 }
 
-impl PageServerConf {
-    //
-    // Repository paths, relative to workdir.
-    //
+/// Zenith Timeline ID is a 128-bit random ID.
+///
+/// Zenith timeline IDs are different from PostgreSQL timeline
+/// IDs. They serve a similar purpose though: they differentiate
+/// between different "histories" of the same cluster.  However,
+/// PostgreSQL timeline IDs are a bit cumbersome, because they are only
+/// 32-bits wide, and they must be in ascending order in any given
+/// timeline history.  Those limitations mean that we cannot generate a
+/// new PostgreSQL timeline ID by just generating a random number. And
+/// that in turn is problematic for the "pull/push" workflow, where you
+/// have a local copy of a zenith repository, and you periodically sync
+/// the local changes with a remote server. When you work "detached"
+/// from the remote server, you cannot create a PostgreSQL timeline ID
+/// that's guaranteed to be different from all existing timelines in
+/// the remote server. For example, if two people are having a clone of
+/// the repository on their laptops, and they both create a new branch
+/// with different name. What timeline ID would they assign to their
+/// branches? If they pick the same one, and later try to push the
+/// branches to the same remote server, they will get mixed up.
+///
+/// To avoid those issues, Zenith has its own concept of timelines that
+/// is separate from PostgreSQL timelines, and doesn't have those
+/// limitations. A zenith timeline is identified by a 128-bit ID, which
+/// is usually printed out as a hex string.
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
+pub struct ZTimelineId([u8; 16]);
 
-    fn tenants_path(&self) -> PathBuf {
-        self.workdir.join(TENANTS_SEGMENT_NAME)
-    }
+impl FromStr for ZTimelineId {
+    type Err = hex::FromHexError;
 
-    fn tenant_path(&self, tenantid: &ZTenantId) -> PathBuf {
-        self.tenants_path().join(tenantid.to_string())
-    }
+    fn from_str(s: &str) -> Result<ZTimelineId, Self::Err> {
+        let timelineid = hex::decode(s)?;
 
-    fn tags_path(&self, tenantid: &ZTenantId) -> PathBuf {
-        self.tenant_path(tenantid).join("refs").join("tags")
-    }
-
-    fn tag_path(&self, tag_name: &str, tenantid: &ZTenantId) -> PathBuf {
-        self.tags_path(tenantid).join(tag_name)
-    }
-
-    fn branches_path(&self, tenantid: &ZTenantId) -> PathBuf {
-        self.tenant_path(tenantid).join("refs").join("branches")
-    }
-
-    fn branch_path(&self, branch_name: &str, tenantid: &ZTenantId) -> PathBuf {
-        self.branches_path(tenantid).join(branch_name)
-    }
-
-    fn timelines_path(&self, tenantid: &ZTenantId) -> PathBuf {
-        self.tenant_path(tenantid).join(TIMELINES_SEGMENT_NAME)
-    }
-
-    fn timeline_path(&self, timelineid: &ZTimelineId, tenantid: &ZTenantId) -> PathBuf {
-        self.timelines_path(tenantid).join(timelineid.to_string())
-    }
-
-    //
-    // Postgres distribution paths
-    //
-
-    pub fn pg_bin_dir(&self) -> PathBuf {
-        self.pg_distrib_dir.join("bin")
-    }
-
-    pub fn pg_lib_dir(&self) -> PathBuf {
-        self.pg_distrib_dir.join("lib")
-    }
-
-    #[cfg(test)]
-    fn test_repo_dir(test_name: &str) -> PathBuf {
-        PathBuf::from(format!("../tmp_check/test_{}", test_name))
-    }
-
-    #[cfg(test)]
-    fn dummy_conf(repo_dir: PathBuf) -> Self {
-        PageServerConf {
-            daemonize: false,
-            checkpoint_distance: defaults::DEFAULT_CHECKPOINT_DISTANCE,
-            checkpoint_period: Duration::from_secs(10),
-            gc_horizon: defaults::DEFAULT_GC_HORIZON,
-            gc_period: Duration::from_secs(10),
-            open_mem_limit: defaults::DEFAULT_OPEN_MEM_LIMIT,
-            page_cache_size: defaults::DEFAULT_PAGE_CACHE_SIZE,
-            max_file_descriptors: defaults::DEFAULT_MAX_FILE_DESCRIPTORS,
-            listen_pg_addr: defaults::DEFAULT_PG_LISTEN_ADDR.to_string(),
-            listen_http_addr: defaults::DEFAULT_HTTP_LISTEN_ADDR.to_string(),
-            superuser: "zenith_admin".to_string(),
-            workdir: repo_dir,
-            pg_distrib_dir: "".into(),
-            auth_type: AuthType::Trust,
-            auth_validation_public_key_path: None,
-            remote_storage_config: None,
-        }
+        let mut buf: [u8; 16] = [0u8; 16];
+        buf.copy_from_slice(timelineid.as_slice());
+        Ok(ZTimelineId(buf))
     }
 }
 
-/// Config for the Repository checkpointer
-#[derive(Debug, Clone, Copy)]
-pub enum CheckpointConfig {
-    // Flush in-memory data that is older than this
-    Distance(u64),
-    // Flush all in-memory data
-    Forced,
-}
+impl ZTimelineId {
+    pub fn from(b: [u8; 16]) -> ZTimelineId {
+        ZTimelineId(b)
+    }
 
-/// External backup storage configuration, enough for creating a client for that storage.
-#[derive(Debug, Clone)]
-pub struct RemoteStorageConfig {
-    /// Max allowed number of concurrent sync operations between pageserver and the remote storage.
-    pub max_concurrent_sync: NonZeroUsize,
-    /// Max allowed errors before the sync task is considered failed and evicted.
-    pub max_sync_errors: NonZeroU32,
-    /// The storage connection configuration.
-    pub storage: RemoteStorageKind,
-}
+    pub fn get_from_buf(buf: &mut dyn bytes::Buf) -> ZTimelineId {
+        let mut arr = [0u8; 16];
+        buf.copy_to_slice(&mut arr);
+        ZTimelineId::from(arr)
+    }
 
-/// A kind of a remote storage to connect to, with its connection configuration.
-#[derive(Debug, Clone)]
-pub enum RemoteStorageKind {
-    /// Storage based on local file system.
-    /// Specify a root folder to place all stored relish data into.
-    LocalFs(PathBuf),
-    /// AWS S3 based storage, storing all relishes into the root
-    /// of the S3 bucket from the config.
-    AwsS3(S3Config),
-}
-
-/// AWS S3 bucket coordinates and access credentials to manage the bucket contents (read and write).
-#[derive(Clone)]
-pub struct S3Config {
-    /// Name of the bucket to connect to.
-    pub bucket_name: String,
-    /// The region where the bucket is located at.
-    pub bucket_region: String,
-    /// "Login" to use when connecting to bucket.
-    /// Can be empty for cases like AWS k8s IAM
-    /// where we can allow certain pods to connect
-    /// to the bucket directly without any credentials.
-    pub access_key_id: Option<String>,
-    /// "Password" to use when connecting to bucket.
-    pub secret_access_key: Option<String>,
-}
-
-impl std::fmt::Debug for S3Config {
-    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
-        f.debug_struct("S3Config")
-            .field("bucket_name", &self.bucket_name)
-            .field("bucket_region", &self.bucket_region)
-            .finish()
+    pub fn as_arr(&self) -> [u8; 16] {
+        self.0
+    }
+}
+
+impl fmt::Display for ZTimelineId {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+        f.write_str(&hex::encode(self.0))
+    }
+}
+
+pub fn zenith_repo_dir() -> PathBuf {
+    // Find repository path
+    match std::env::var_os("ZENITH_REPO_DIR") {
+        Some(val) => PathBuf::from(val.to_str().unwrap()),
+        None => ".zenith".into(),
     }
 }

pageserver/src/relish.rs

@@ -1,231 +0,0 @@
-//!
-//! Zenith stores PostgreSQL relations, and some other files, in the
-//! repository.  The relations (i.e. tables and indexes) take up most
-//! of the space in a typical installation, while the other files are
-//! small. We call each relation and other file that is stored in the
-//! repository a "relish". It comes from "rel"-ish, as in "kind of a
-//! rel", because it covers relations as well as other things that are
-//! not relations, but are treated similarly for the purposes of the
-//! storage layer.
-//!
-//! This source file contains the definition of the RelishTag struct,
-//! which uniquely identifies a relish.
-//!
-//! Relishes come in two flavors: blocky and non-blocky. Relations and
-//! SLRUs are blocky, that is, they are divided into 8k blocks, and
-//! the repository tracks their size. Other relishes are non-blocky:
-//! the content of the whole relish is stored as one blob. Block
-//! number must be passed as 0 for all operations on a non-blocky
-//! relish. The one "block" that you store in a non-blocky relish can
-//! have arbitrary size, but they are expected to be small, or you
-//! will have performance issues.
-//!
-//! All relishes are versioned by LSN in the repository.
-//!
-
-use serde::{Deserialize, Serialize};
-use std::fmt;
-
-use postgres_ffi::relfile_utils::forknumber_to_name;
-use postgres_ffi::{Oid, TransactionId};
-
-///
-/// RelishTag identifies one relish.
-///
-#[derive(Debug, Clone, Copy, Hash, Serialize, Deserialize, PartialEq, Eq, PartialOrd, Ord)]
-pub enum RelishTag {
-    // Relations correspond to PostgreSQL relation forks. Each
-    // PostgreSQL relation fork is considered a separate relish.
-    Relation(RelTag),
-
-    // SLRUs include pg_clog, pg_multixact/members, and
-    // pg_multixact/offsets. There are other SLRUs in PostgreSQL, but
-    // they don't need to be stored permanently (e.g. pg_subtrans),
-    // or we do not support them in zenith yet (pg_commit_ts).
-    //
-    // These are currently never requested directly by the compute
-    // nodes, although in principle that would be possible. However,
-    // when a new compute node is created, these are included in the
-    // tarball that we send to the compute node to initialize the
-    // PostgreSQL data directory.
-    //
-    // Each SLRU segment in PostgreSQL is considered a separate
-    // relish. For example, pg_clog/0000, pg_clog/0001, and so forth.
-    //
-    // SLRU segments are divided into blocks, like relations.
-    Slru { slru: SlruKind, segno: u32 },
-
-    // Miscellaneous other files that need to be included in the
-    // tarball at compute node creation. These are non-blocky, and are
-    // expected to be small.
-
-    //
-    // FileNodeMap represents PostgreSQL's 'pg_filenode.map'
-    // files. They are needed to map catalog table OIDs to filenode
-    // numbers. Usually the mapping is done by looking up a relation's
-    // 'relfilenode' field in the 'pg_class' system table, but that
-    // doesn't work for 'pg_class' itself and a few other such system
-    // relations. See PostgreSQL relmapper.c for details.
-    //
-    // Each database has a map file for its local mapped catalogs,
-    // and there is a separate map file for shared catalogs.
-    //
-    // These files are always 512 bytes long (although we don't check
-    // or care about that in the page server).
-    //
-    FileNodeMap { spcnode: Oid, dbnode: Oid },
-
-    //
-    // State files for prepared transactions (e.g pg_twophase/1234)
-    //
-    TwoPhase { xid: TransactionId },
-
-    // The control file, stored in global/pg_control
-    ControlFile,
-
-    // Special entry that represents PostgreSQL checkpoint. It doesn't
-    // correspond to to any physical file in PostgreSQL, but we use it
-    // to track fields needed to restore the checkpoint data in the
-    // control file, when a compute node is created.
-    Checkpoint,
-}
-
-impl RelishTag {
-    pub const fn is_blocky(&self) -> bool {
-        match self {
-            // These relishes work with blocks
-            RelishTag::Relation(_) | RelishTag::Slru { slru: _, segno: _ } => true,
-
-            // and these don't
-            RelishTag::FileNodeMap {
-                spcnode: _,
-                dbnode: _,
-            }
-            | RelishTag::TwoPhase { xid: _ }
-            | RelishTag::ControlFile
-            | RelishTag::Checkpoint => false,
-        }
-    }
-
-    // Physical relishes represent files and use
-    // RelationSizeEntry to track existing and dropped files.
-    // They can be both blocky and non-blocky.
-    pub const fn is_physical(&self) -> bool {
-        match self {
-            // These relishes represent physical files
-            RelishTag::Relation(_)
-            | RelishTag::Slru { .. }
-            | RelishTag::FileNodeMap { .. }
-            | RelishTag::TwoPhase { .. } => true,
-
-            // and these don't
-            RelishTag::ControlFile | RelishTag::Checkpoint => false,
-        }
-    }
-
-    // convenience function to check if this relish is a normal relation.
-    pub const fn is_relation(&self) -> bool {
-        matches!(self, RelishTag::Relation(_))
-    }
-}
-
-///
-/// Relation data file segment id throughout the Postgres cluster.
-///
-/// Every data file in Postgres is uniquely identified by 4 numbers:
-/// - relation id / node (`relnode`)
-/// - database id (`dbnode`)
-/// - tablespace id (`spcnode`), in short this is a unique id of a separate
-///   directory to store data files.
-/// - forknumber (`forknum`) is used to split different kinds of data of the same relation
-///   between some set of files (`relnode`, `relnode_fsm`, `relnode_vm`).
-///
-/// In native Postgres code `RelFileNode` structure and individual `ForkNumber` value
-/// are used for the same purpose.
-/// [See more related comments here](https:///github.com/postgres/postgres/blob/99c5852e20a0987eca1c38ba0c09329d4076b6a0/src/include/storage/relfilenode.h#L57).
-///
-#[derive(Debug, PartialEq, Eq, PartialOrd, Hash, Ord, Clone, Copy, Serialize, Deserialize)]
-pub struct RelTag {
-    pub forknum: u8,
-    pub spcnode: Oid,
-    pub dbnode: Oid,
-    pub relnode: Oid,
-}
-
-/// Display RelTag in the same format that's used in most PostgreSQL debug messages:
-///
-/// <spcnode>/<dbnode>/<relnode>[_fsm|_vm|_init]
-///
-impl fmt::Display for RelTag {
-    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
-        if let Some(forkname) = forknumber_to_name(self.forknum) {
-            write!(
-                f,
-                "{}/{}/{}_{}",
-                self.spcnode, self.dbnode, self.relnode, forkname
-            )
-        } else {
-            write!(f, "{}/{}/{}", self.spcnode, self.dbnode, self.relnode)
-        }
-    }
-}
-
-/// Display RelTag in the same format that's used in most PostgreSQL debug messages:
-///
-/// <spcnode>/<dbnode>/<relnode>[_fsm|_vm|_init]
-///
-impl fmt::Display for RelishTag {
-    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
-        match self {
-            RelishTag::Relation(rel) => rel.fmt(f),
-            RelishTag::Slru { slru, segno } => {
-                // e.g. pg_clog/0001
-                write!(f, "{}/{:04X}", slru.to_str(), segno)
-            }
-            RelishTag::FileNodeMap { spcnode, dbnode } => {
-                write!(f, "relmapper file for spc {} db {}", spcnode, dbnode)
-            }
-            RelishTag::TwoPhase { xid } => {
-                write!(f, "pg_twophase/{:08X}", xid)
-            }
-            RelishTag::ControlFile => {
-                write!(f, "control file")
-            }
-            RelishTag::Checkpoint => {
-                write!(f, "checkpoint")
-            }
-        }
-    }
-}
-
-///
-/// Non-relation transaction status files (clog (a.k.a. pg_xact) and
-/// pg_multixact) in Postgres are handled by SLRU (Simple LRU) buffer,
-/// hence the name.
-///
-/// These files are global for a postgres instance.
-///
-/// These files are divided into segments, which are divided into
-/// pages of the same BLCKSZ as used for relation files.
-///
-#[derive(Debug, Clone, Copy, Hash, Serialize, Deserialize, PartialEq, Eq, PartialOrd, Ord)]
-pub enum SlruKind {
-    Clog,
-    MultiXactMembers,
-    MultiXactOffsets,
-}
-
-impl SlruKind {
-    pub fn to_str(&self) -> &'static str {
-        match self {
-            Self::Clog => "pg_xact",
-            Self::MultiXactMembers => "pg_multixact/members",
-            Self::MultiXactOffsets => "pg_multixact/offsets",
-        }
-    }
-}
-
-pub const FIRST_NONREL_RELISH_TAG: RelishTag = RelishTag::Slru {
-    slru: SlruKind::Clog,
-    segno: 0,
-};

pageserver/src/remote_storage.rs

@@ -1,182 +0,0 @@
-//! A set of generic storage abstractions for the page server to use when backing up and restoring its state from the external storage.
-//! This particular module serves as a public API border between pageserver and the internal storage machinery.
-//! No other modules from this tree are supposed to be used directly by the external code.
-//!
-//! There are a few components the storage machinery consists of:
-//! * [`RemoteStorage`] trait a CRUD-like generic abstraction to use for adapting external storages with a few implementations:
-//!     * [`local_fs`] allows to use local file system as an external storage
-//!     * [`rust_s3`] uses AWS S3 bucket entirely as an external storage
-//!
-//! * synchronization logic at [`storage_sync`] module that keeps pageserver state (both runtime one and the workdir files) and storage state in sync.
-//!
-//! * public API via to interact with the external world: [`run_storage_sync_thread`] and [`schedule_timeline_checkpoint_upload`]
-//!
-//! Here's a schematic overview of all interactions backup and the rest of the pageserver perform:
-//!
-//! +------------------------+                                    +--------->-------+
-//! |                        |  - - - (init async loop) - - - ->  |                 |
-//! |                        |                                    |                 |
-//! |                        |  ------------------------------->  |      async      |
-//! |       pageserver       |    (schedule checkpoint upload)    | upload/download |
-//! |                        |                                    |      loop       |
-//! |                        |  <-------------------------------  |                 |
-//! |                        |    (register downloaded layers)    |                 |
-//! +------------------------+                                    +---------<-------+
-//!                                                                         |
-//!                                                                         |
-//!                                          CRUD layer file operations     |
-//!                                     (upload/download/delete/list, etc.) |
-//!                                                                         V
-//!                                                            +------------------------+
-//!                                                            |                        |
-//!                                                            | [`RemoteStorage`] impl |
-//!                                                            |                        |
-//!                                                            | pageserver assumes it  |
-//!                                                            | owns exclusive write   |
-//!                                                            | access to this storage |
-//!                                                            +------------------------+
-//!
-//! First, during startup, the pageserver inits the storage sync thread with the async loop, or leaves the loop unitialised, if configured so.
-//! Some time later, during pageserver checkpoints, in-memory data is flushed onto disk along with its metadata.
-//! If the storage sync loop was successfully started before, pageserver schedules the new image uploads after every checkpoint.
-//! See [`crate::layered_repository`] for the upload calls and the adjacent logic.
-//!
-//! The storage logic considers `image` as a set of local files, fully representing a certain timeline at given moment (identified with `disk_consistent_lsn`).
-//! Timeline can change its state, by adding more files on disk and advancing its `disk_consistent_lsn`: this happens after pageserver checkpointing and is followed
-//! by the storage upload, if enabled.
-//! When a certain image gets uploaded, the sync loop remembers the fact, preventing further reuploads of the same image state.
-//! No files are deleted from either local or remote storage, only the missing ones locally/remotely get downloaded/uploaded, local metadata file will be overwritten
-//! when the newer timeline is downloaded.
-//!
-//! Meanwhile, the loop inits the storage connection and checks the remote files stored.
-//! This is done once at startup only, relying on the fact that pageserver uses the storage alone (ergo, nobody else uploads the files to the storage but this server).
-//! Based on the remote image data, the storage sync logic queues image downloads, while accepting any potential upload tasks from pageserver and managing the tasks by their priority.
-//! On the image download, a [`crate::tenant_mgr::register_relish_download`] function is called to register the new image in pageserver, initializing all related threads and internal state.
-//!
-//! When the pageserver terminates, the upload loop finishes a current image sync task (if any) and exits.
-//!
-//! NOTES:
-//! * pageserver assumes it has exclusive write access to the remote storage. If supported, the way multiple pageservers can be separated in the same storage
-//! (i.e. using different directories in the local filesystem external storage), but totally up to the storage implementation and not covered with the trait API.
-//!
-//! * the uploads do not happen right after pageserver startup, they are registered when
-//!     1. pageserver does the checkpoint, which happens further in the future after the server start
-//!     2. pageserver loads the timeline from disk for the first time
-//!
-//! * the uploads do not happen right after the upload registration: the sync loop might be occupied with other tasks, or tasks with bigger priority could be waiting already
-//!
-//! * all synchronization tasks (including the public API to register uploads and downloads and the sync queue management) happens on an image scale: a big set of remote files,
-//! enough to represent (and recover, if needed) a certain timeline state. On the contrary, all internal storage CRUD calls are made per reilsh file from those images.
-//! This way, the synchronization is able to download the image partially, if some state was synced before, but exposes correctly synced images only.
-
-mod local_fs;
-mod rust_s3;
-mod storage_sync;
-
-use std::{
-    path::{Path, PathBuf},
-    thread,
-};
-
-use anyhow::Context;
-use tokio::io;
-use zenith_utils::zid::{ZTenantId, ZTimelineId};
-
-pub use self::storage_sync::schedule_timeline_checkpoint_upload;
-use self::{local_fs::LocalFs, rust_s3::S3};
-use crate::{PageServerConf, RemoteStorageKind};
-
-/// Any timeline has its own id and its own tenant it belongs to,
-/// the sync processes group timelines by both for simplicity.
-#[derive(Debug, PartialEq, Eq, PartialOrd, Ord, Clone, Copy, Hash)]
-pub struct TimelineSyncId(ZTenantId, ZTimelineId);
-
-/// Based on the config, initiates the remote storage connection and starts a separate thread
-/// that ensures that pageserver and the remote storage are in sync with each other.
-/// If no external configuraion connection given, no thread or storage initialization is done.
-pub fn run_storage_sync_thread(
-    config: &'static PageServerConf,
-) -> anyhow::Result<Option<thread::JoinHandle<anyhow::Result<()>>>> {
-    match &config.remote_storage_config {
-        Some(storage_config) => {
-            let max_concurrent_sync = storage_config.max_concurrent_sync;
-            let max_sync_errors = storage_config.max_sync_errors;
-            let handle = match &storage_config.storage {
-                RemoteStorageKind::LocalFs(root) => storage_sync::spawn_storage_sync_thread(
-                    config,
-                    LocalFs::new(root.clone(), &config.workdir)?,
-                    max_concurrent_sync,
-                    max_sync_errors,
-                ),
-                RemoteStorageKind::AwsS3(s3_config) => storage_sync::spawn_storage_sync_thread(
-                    config,
-                    S3::new(s3_config, &config.workdir)?,
-                    max_concurrent_sync,
-                    max_sync_errors,
-                ),
-            };
-            handle.map(Some)
-        }
-        None => Ok(None),
-    }
-}
-
-/// Storage (potentially remote) API to manage its state.
-/// This storage tries to be unaware of any layered repository context,
-/// providing basic CRUD operations with storage files.
-#[async_trait::async_trait]
-trait RemoteStorage: Send + Sync {
-    /// A way to uniquely reference a file in the remote storage.
-    type StoragePath;
-
-    /// Attempts to derive the storage path out of the local path, if the latter is correct.
-    fn storage_path(&self, local_path: &Path) -> anyhow::Result<Self::StoragePath>;
-
-    /// Gets the download path of the given storage file.
-    fn local_path(&self, storage_path: &Self::StoragePath) -> anyhow::Result<PathBuf>;
-
-    /// Lists all items the storage has right now.
-    async fn list(&self) -> anyhow::Result<Vec<Self::StoragePath>>;
-
-    /// Streams the local file contents into remote into the remote storage entry.
-    async fn upload(
-        &self,
-        from: impl io::AsyncRead + Unpin + Send + Sync + 'static,
-        to: &Self::StoragePath,
-    ) -> anyhow::Result<()>;
-
-    /// Streams the remote storage entry contents into the buffered writer given, returns the filled writer.
-    async fn download(
-        &self,
-        from: &Self::StoragePath,
-        to: &mut (impl io::AsyncWrite + Unpin + Send + Sync),
-    ) -> anyhow::Result<()>;
-
-    /// Streams a given byte range of the remote storage entry contents into the buffered writer given, returns the filled writer.
-    async fn download_range(
-        &self,
-        from: &Self::StoragePath,
-        start_inclusive: u64,
-        end_exclusive: Option<u64>,
-        to: &mut (impl io::AsyncWrite + Unpin + Send + Sync),
-    ) -> anyhow::Result<()>;
-
-    async fn delete(&self, path: &Self::StoragePath) -> anyhow::Result<()>;
-}
-
-fn strip_path_prefix<'a>(prefix: &'a Path, path: &'a Path) -> anyhow::Result<&'a Path> {
-    if prefix == path {
-        anyhow::bail!(
-            "Prefix and the path are equal, cannot strip: '{}'",
-            prefix.display()
-        )
-    } else {
-        path.strip_prefix(prefix).with_context(|| {
-            format!(
-                "Path '{}' is not prefixed with '{}'",
-                path.display(),
-                prefix.display(),
-            )
-        })
-    }
-}

pageserver/src/remote_storage/README.md

@@ -1,75 +0,0 @@
-# Non-implementation details
-
-This document describes the current state of the backup system in pageserver, existing limitations and concerns, why some things are done the way they are the future development plans.
-Detailed description on how the synchronization works and how it fits into the rest of the pageserver can be found in the [storage module](./../remote_storage.rs) and its submodules.
-Ideally, this document should disappear after current implementation concerns are mitigated, with the remaining useful knowledge bits moved into rustdocs.
-
-## Approach
-
-Backup functionality is a new component, appeared way after the core DB functionality was implemented.
-Pageserver layer functionality is also quite volatile at the moment, there's a risk its local file management changes over time.
-
-To avoid adding more chaos into that, backup functionality is currently designed as a relatively standalone component, with the majority of its logic placed in a standalone async loop.
-This way, the backups are managed in background, not affecting directly other pageserver parts: this way the backup and restoration process may lag behind, but eventually keep up with the reality. To track that, a set of prometheus metrics is exposed from pageserver.
-
-## What's done
-
-Current implementation
-* provides remote storage wrappers for AWS S3 and local FS
-* uploads layers, frozen by pageserver checkpoint thread
-* downloads and registers layers, found on the remote storage, but missing locally
-
-No good optimisations or performance testing is done, the feature is disabled by default and gets polished over time.
-It's planned to deal with all questions that are currently on and prepare the feature to be enabled by default in cloud environments.
-
-### Peculiarities
-
-As mentioned, the backup component is rather new and under development currently, so not all things are done properly from the start.
-Here's the list of known compromises with comments:
-
-* Remote storage model is the same as the `tenants/` directory contents of the pageserver's local workdir storage.
-This is relatively simple to implement, but may be costly to use in AWS S3: an initial data image contains ~782 relish files and a metadata file, ~31 MB combined.
-AWS charges per API call and for traffic either, layers are expected to be updated frequently, so this model most probably is ineffective.
-Additionally, pageservers might need to migrate images between tenants, which does not improve the situation.
-
-Storage sync API operates images when backing up or restoring a backup, so we're fluent to repack the layer contents the way we want to, which most probably will be done later.
-
-* no proper file comparison
-
-Currently, every layer contains `Lsn` in their name, to map the data it holds against a certain DB state.
-Then the images with same ids and different `Lsn`'s are compared, files are considered equal if their local file paths are equal (for remote files, "local file path" is their download destination).
-No file contents assertion is done currently, but should be.
-AWS S3 returns file checksums during the `list` operation, so that can be used to ensure the backup consistency, but that needs further research and, since current pageserver impl also needs to deal with layer file checksums.
-
-For now, due to this, we consider local workdir files as source of truth, not removing them ever and adjusting remote files instead, if image files mismatch.
-
-* sad rust-s3 api
-
-rust-s3 is not very pleasant to use:
-1. it returns `anyhow::Result` and it's hard to distinguish "missing file" cases from "no connection" one, for instance
-2. at least one function it its API that we need (`get_object_stream`) has `async` keyword and blocks (!), see details [here](https://github.com/zenithdb/zenith/pull/752#discussion_r728373091)
-3. it's a prerelease library with unclear maintenance status
-4. noisy on debug level
-
-But it's already used in the project, so for now it's reused to avoid bloating the dependency tree.
-Based on previous evaluation, even `rusoto-s3` could be a better choice over this library, but needs further benchmarking.
-
-
-* gc and branches are ignored
-
-So far, we don't consider non-main images and don't adjust the remote storage based on GC thread loop results.
-Only checkpointer loop affects the remote storage.
-
-* more layers should be downloaded on demand
-
-Since we download and load remote layers into pageserver, there's a possibility a need for those layers' ancestors arise.
-Most probably, every downloaded image's ancestor is not present in locally too, but currently there's no logic for downloading such ancestors and their metadata,
-so the pageserver is unable to respond property on requests to such ancestors.
-
-To implement the downloading, more `tenant_mgr` refactoring is needed to properly handle web requests for layers and handle the state changes.
-[Here](https://github.com/zenithdb/zenith/pull/689#issuecomment-931216193) are the details about initial state management updates needed.
-
-* no IT tests
-
-Automated S3 testing is lacking currently, due to no convenient way to enable backups during the tests.
-After it's fixed, benchmark runs should also be carried out to find bottlenecks.

pageserver/src/remote_storage/local_fs.rs

@@ -1,689 +0,0 @@
-//! Local filesystem acting as a remote storage.
-//! Multiple pageservers can use the same "storage" of this kind by using different storage roots.
-//!
-//! This storage used in pageserver tests, but can also be used in cases when a certain persistent
-//! volume is mounted to the local FS.
-
-use std::{
-    future::Future,
-    path::{Path, PathBuf},
-    pin::Pin,
-};
-
-use anyhow::{bail, ensure, Context};
-use tokio::{
-    fs,
-    io::{self, AsyncReadExt, AsyncSeekExt, AsyncWriteExt},
-};
-use tracing::*;
-
-use super::{strip_path_prefix, RemoteStorage};
-
-pub struct LocalFs {
-    pageserver_workdir: &'static Path,
-    root: PathBuf,
-}
-
-impl LocalFs {
-    /// Attempts to create local FS storage, along with its root directory.
-    pub fn new(root: PathBuf, pageserver_workdir: &'static Path) -> anyhow::Result<Self> {
-        if !root.exists() {
-            std::fs::create_dir_all(&root).with_context(|| {
-                format!(
-                    "Failed to create all directories in the given root path '{}'",
-                    root.display(),
-                )
-            })?;
-        }
-        Ok(Self {
-            pageserver_workdir,
-            root,
-        })
-    }
-
-    fn resolve_in_storage(&self, path: &Path) -> anyhow::Result<PathBuf> {
-        if path.is_relative() {
-            Ok(self.root.join(path))
-        } else if path.starts_with(&self.root) {
-            Ok(path.to_path_buf())
-        } else {
-            bail!(
-                "Path '{}' does not belong to the current storage",
-                path.display()
-            )
-        }
-    }
-}
-
-#[async_trait::async_trait]
-impl RemoteStorage for LocalFs {
-    type StoragePath = PathBuf;
-
-    fn storage_path(&self, local_path: &Path) -> anyhow::Result<Self::StoragePath> {
-        Ok(self.root.join(
-            strip_path_prefix(self.pageserver_workdir, local_path)
-                .context("local path does not belong to this storage")?,
-        ))
-    }
-
-    fn local_path(&self, storage_path: &Self::StoragePath) -> anyhow::Result<PathBuf> {
-        let relative_path = strip_path_prefix(&self.root, storage_path)
-            .context("local path does not belong to this storage")?;
-        Ok(self.pageserver_workdir.join(relative_path))
-    }
-
-    async fn list(&self) -> anyhow::Result<Vec<Self::StoragePath>> {
-        Ok(get_all_files(&self.root).await?.into_iter().collect())
-    }
-
-    async fn upload(
-        &self,
-        mut from: impl io::AsyncRead + Unpin + Send + Sync + 'static,
-        to: &Self::StoragePath,
-    ) -> anyhow::Result<()> {
-        let target_file_path = self.resolve_in_storage(to)?;
-        create_target_directory(&target_file_path).await?;
-        let mut destination = io::BufWriter::new(
-            fs::OpenOptions::new()
-                .write(true)
-                .create(true)
-                .open(&target_file_path)
-                .await
-                .with_context(|| {
-                    format!(
-                        "Failed to open target fs destination at '{}'",
-                        target_file_path.display()
-                    )
-                })?,
-        );
-
-        io::copy(&mut from, &mut destination)
-            .await
-            .with_context(|| {
-                format!(
-                    "Failed to upload file to the local storage at '{}'",
-                    target_file_path.display()
-                )
-            })?;
-        destination.flush().await.with_context(|| {
-            format!(
-                "Failed to upload file to the local storage at '{}'",
-                target_file_path.display()
-            )
-        })?;
-        Ok(())
-    }
-
-    async fn download(
-        &self,
-        from: &Self::StoragePath,
-        to: &mut (impl io::AsyncWrite + Unpin + Send + Sync),
-    ) -> anyhow::Result<()> {
-        let file_path = self.resolve_in_storage(from)?;
-
-        if file_path.exists() && file_path.is_file() {
-            let mut source = io::BufReader::new(
-                fs::OpenOptions::new()
-                    .read(true)
-                    .open(&file_path)
-                    .await
-                    .with_context(|| {
-                        format!(
-                            "Failed to open source file '{}' to use in the download",
-                            file_path.display()
-                        )
-                    })?,
-            );
-            io::copy(&mut source, to).await.with_context(|| {
-                format!(
-                    "Failed to download file '{}' from the local storage",
-                    file_path.display()
-                )
-            })?;
-            source.flush().await?;
-            Ok(())
-        } else {
-            bail!(
-                "File '{}' either does not exist or is not a file",
-                file_path.display()
-            )
-        }
-    }
-
-    async fn download_range(
-        &self,
-        from: &Self::StoragePath,
-        start_inclusive: u64,
-        end_exclusive: Option<u64>,
-        to: &mut (impl io::AsyncWrite + Unpin + Send + Sync),
-    ) -> anyhow::Result<()> {
-        if let Some(end_exclusive) = end_exclusive {
-            ensure!(
-                end_exclusive > start_inclusive,
-                "Invalid range, start ({}) is bigger then end ({:?})",
-                start_inclusive,
-                end_exclusive
-            );
-            if start_inclusive == end_exclusive.saturating_sub(1) {
-                return Ok(());
-            }
-        }
-        let file_path = self.resolve_in_storage(from)?;
-
-        if file_path.exists() && file_path.is_file() {
-            let mut source = io::BufReader::new(
-                fs::OpenOptions::new()
-                    .read(true)
-                    .open(&file_path)
-                    .await
-                    .with_context(|| {
-                        format!(
-                            "Failed to open source file '{}' to use in the download",
-                            file_path.display()
-                        )
-                    })?,
-            );
-            source
-                .seek(io::SeekFrom::Start(start_inclusive))
-                .await
-                .context("Failed to seek to the range start in a local storage file")?;
-            match end_exclusive {
-                Some(end_exclusive) => {
-                    io::copy(&mut source.take(end_exclusive - start_inclusive), to).await
-                }
-                None => io::copy(&mut source, to).await,
-            }
-            .with_context(|| {
-                format!(
-                    "Failed to download file '{}' range from the local storage",
-                    file_path.display()
-                )
-            })?;
-            Ok(())
-        } else {
-            bail!(
-                "File '{}' either does not exist or is not a file",
-                file_path.display()
-            )
-        }
-    }
-
-    async fn delete(&self, path: &Self::StoragePath) -> anyhow::Result<()> {
-        let file_path = self.resolve_in_storage(path)?;
-        if file_path.exists() && file_path.is_file() {
-            Ok(fs::remove_file(file_path).await?)
-        } else {
-            bail!(
-                "File '{}' either does not exist or is not a file",
-                file_path.display()
-            )
-        }
-    }
-}
-
-fn get_all_files<'a, P>(
-    directory_path: P,
-) -> Pin<Box<dyn Future<Output = anyhow::Result<Vec<PathBuf>>> + Send + Sync + 'a>>
-where
-    P: AsRef<Path> + Send + Sync + 'a,
-{
-    Box::pin(async move {
-        let directory_path = directory_path.as_ref();
-        if directory_path.exists() {
-            if directory_path.is_dir() {
-                let mut paths = Vec::new();
-                let mut dir_contents = fs::read_dir(directory_path).await?;
-                while let Some(dir_entry) = dir_contents.next_entry().await? {
-                    let file_type = dir_entry.file_type().await?;
-                    let entry_path = dir_entry.path();
-                    if file_type.is_symlink() {
-                        debug!("{:?} us a symlink, skipping", entry_path)
-                    } else if file_type.is_dir() {
-                        paths.extend(get_all_files(entry_path).await?.into_iter())
-                    } else {
-                        paths.push(dir_entry.path());
-                    }
-                }
-                Ok(paths)
-            } else {
-                bail!("Path '{}' is not a directory", directory_path.display())
-            }
-        } else {
-            Ok(Vec::new())
-        }
-    })
-}
-
-async fn create_target_directory(target_file_path: &Path) -> anyhow::Result<()> {
-    let target_dir = match target_file_path.parent() {
-        Some(parent_dir) => parent_dir,
-        None => bail!(
-            "File path '{}' has no parent directory",
-            target_file_path.display()
-        ),
-    };
-    if !target_dir.exists() {
-        fs::create_dir_all(target_dir).await?;
-    }
-    Ok(())
-}
-
-#[cfg(test)]
-mod pure_tests {
-    use crate::{
-        layered_repository::metadata::METADATA_FILE_NAME,
-        repository::repo_harness::{RepoHarness, TIMELINE_ID},
-    };
-
-    use super::*;
-
-    #[test]
-    fn storage_path_positive() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("storage_path_positive")?;
-        let storage_root = PathBuf::from("somewhere").join("else");
-        let storage = LocalFs {
-            pageserver_workdir: &repo_harness.conf.workdir,
-            root: storage_root.clone(),
-        };
-
-        let local_path = repo_harness.timeline_path(&TIMELINE_ID).join("file_name");
-        let expected_path = storage_root.join(local_path.strip_prefix(&repo_harness.conf.workdir)?);
-
-        assert_eq!(
-            expected_path,
-            storage.storage_path(&local_path).expect("Matching path should map to storage path normally"),
-            "File paths from pageserver workdir should be stored in local fs storage with the same path they have relative to the workdir"
-        );
-
-        Ok(())
-    }
-
-    #[test]
-    fn storage_path_negatives() -> anyhow::Result<()> {
-        #[track_caller]
-        fn storage_path_error(storage: &LocalFs, mismatching_path: &Path) -> String {
-            match storage.storage_path(mismatching_path) {
-                Ok(wrong_path) => panic!(
-                    "Expected path '{}' to error, but got storage path: {:?}",
-                    mismatching_path.display(),
-                    wrong_path,
-                ),
-                Err(e) => format!("{:?}", e),
-            }
-        }
-
-        let repo_harness = RepoHarness::create("storage_path_negatives")?;
-        let storage_root = PathBuf::from("somewhere").join("else");
-        let storage = LocalFs {
-            pageserver_workdir: &repo_harness.conf.workdir,
-            root: storage_root,
-        };
-
-        let error_string = storage_path_error(&storage, &repo_harness.conf.workdir);
-        assert!(error_string.contains("does not belong to this storage"));
-        assert!(error_string.contains(repo_harness.conf.workdir.to_str().unwrap()));
-
-        let mismatching_path_str = "/something/else";
-        let error_message = storage_path_error(&storage, Path::new(mismatching_path_str));
-        assert!(
-            error_message.contains(mismatching_path_str),
-            "Error should mention wrong path"
-        );
-        assert!(
-            error_message.contains(repo_harness.conf.workdir.to_str().unwrap()),
-            "Error should mention server workdir"
-        );
-        assert!(error_message.contains("does not belong to this storage"));
-
-        Ok(())
-    }
-
-    #[test]
-    fn local_path_positive() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("local_path_positive")?;
-        let storage_root = PathBuf::from("somewhere").join("else");
-        let storage = LocalFs {
-            pageserver_workdir: &repo_harness.conf.workdir,
-            root: storage_root.clone(),
-        };
-
-        let name = "not a metadata";
-        let local_path = repo_harness.timeline_path(&TIMELINE_ID).join(name);
-        assert_eq!(
-            local_path,
-            storage
-                .local_path(
-                    &storage_root.join(local_path.strip_prefix(&repo_harness.conf.workdir)?)
-                )
-                .expect("For a valid input, valid S3 info should be parsed"),
-            "Should be able to parse metadata out of the correctly named remote delta file"
-        );
-
-        let local_metadata_path = repo_harness
-            .timeline_path(&TIMELINE_ID)
-            .join(METADATA_FILE_NAME);
-        let remote_metadata_path = storage.storage_path(&local_metadata_path)?;
-        assert_eq!(
-            local_metadata_path,
-            storage
-                .local_path(&remote_metadata_path)
-                .expect("For a valid input, valid local path should be parsed"),
-            "Should be able to parse metadata out of the correctly named remote metadata file"
-        );
-
-        Ok(())
-    }
-
-    #[test]
-    fn local_path_negatives() -> anyhow::Result<()> {
-        #[track_caller]
-        #[allow(clippy::ptr_arg)] // have to use &PathBuf due to `storage.local_path` parameter requirements
-        fn local_path_error(storage: &LocalFs, storage_path: &PathBuf) -> String {
-            match storage.local_path(storage_path) {
-                Ok(wrong_path) => panic!(
-                    "Expected local path input {:?} to cause an error, but got file path: {:?}",
-                    storage_path, wrong_path,
-                ),
-                Err(e) => format!("{:?}", e),
-            }
-        }
-
-        let repo_harness = RepoHarness::create("local_path_negatives")?;
-        let storage_root = PathBuf::from("somewhere").join("else");
-        let storage = LocalFs {
-            pageserver_workdir: &repo_harness.conf.workdir,
-            root: storage_root,
-        };
-
-        let totally_wrong_path = "wrong_wrong_wrong";
-        let error_message = local_path_error(&storage, &PathBuf::from(totally_wrong_path));
-        assert!(error_message.contains(totally_wrong_path));
-
-        Ok(())
-    }
-
-    #[test]
-    fn download_destination_matches_original_path() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("download_destination_matches_original_path")?;
-        let original_path = repo_harness.timeline_path(&TIMELINE_ID).join("some name");
-
-        let storage_root = PathBuf::from("somewhere").join("else");
-        let dummy_storage = LocalFs {
-            pageserver_workdir: &repo_harness.conf.workdir,
-            root: storage_root,
-        };
-
-        let storage_path = dummy_storage.storage_path(&original_path)?;
-        let download_destination = dummy_storage.local_path(&storage_path)?;
-
-        assert_eq!(
-            original_path, download_destination,
-            "'original path -> storage path -> matching fs path' transformation should produce the same path as the input one for the correct path"
-        );
-
-        Ok(())
-    }
-}
-
-#[cfg(test)]
-mod fs_tests {
-    use super::*;
-    use crate::repository::repo_harness::{RepoHarness, TIMELINE_ID};
-
-    use std::io::Write;
-    use tempfile::tempdir;
-
-    #[tokio::test]
-    async fn upload_file() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("upload_file")?;
-        let storage = create_storage()?;
-
-        let source = create_file_for_upload(
-            &storage.pageserver_workdir.join("whatever"),
-            "whatever_contents",
-        )
-        .await?;
-        let target_path = PathBuf::from("/").join("somewhere").join("else");
-        match storage.upload(source, &target_path).await {
-            Ok(()) => panic!("Should not allow storing files with wrong target path"),
-            Err(e) => {
-                let message = format!("{:?}", e);
-                assert!(message.contains(&target_path.display().to_string()));
-                assert!(message.contains("does not belong to the current storage"));
-            }
-        }
-        assert!(storage.list().await?.is_empty());
-
-        let target_path_1 = upload_dummy_file(&repo_harness, &storage, "upload_1").await?;
-        assert_eq!(
-            storage.list().await?,
-            vec![target_path_1.clone()],
-            "Should list a single file after first upload"
-        );
-
-        let target_path_2 = upload_dummy_file(&repo_harness, &storage, "upload_2").await?;
-        assert_eq!(
-            list_files_sorted(&storage).await?,
-            vec![target_path_1.clone(), target_path_2.clone()],
-            "Should list a two different files after second upload"
-        );
-
-        Ok(())
-    }
-
-    fn create_storage() -> anyhow::Result<LocalFs> {
-        let pageserver_workdir = Box::leak(Box::new(tempdir()?.path().to_owned()));
-        let storage = LocalFs::new(tempdir()?.path().to_owned(), pageserver_workdir)?;
-        Ok(storage)
-    }
-
-    #[tokio::test]
-    async fn download_file() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("download_file")?;
-        let storage = create_storage()?;
-        let upload_name = "upload_1";
-        let upload_target = upload_dummy_file(&repo_harness, &storage, upload_name).await?;
-
-        let mut content_bytes = io::BufWriter::new(std::io::Cursor::new(Vec::new()));
-        storage.download(&upload_target, &mut content_bytes).await?;
-        content_bytes.flush().await?;
-
-        let contents = String::from_utf8(content_bytes.into_inner().into_inner())?;
-        assert_eq!(
-            dummy_contents(upload_name),
-            contents,
-            "We should upload and download the same contents"
-        );
-
-        let non_existing_path = PathBuf::from("somewhere").join("else");
-        match storage.download(&non_existing_path, &mut io::sink()).await {
-            Ok(_) => panic!("Should not allow downloading non-existing storage files"),
-            Err(e) => {
-                let error_string = e.to_string();
-                assert!(error_string.contains("does not exist"));
-                assert!(error_string.contains(&non_existing_path.display().to_string()));
-            }
-        }
-        Ok(())
-    }
-
-    #[tokio::test]
-    async fn download_file_range_positive() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("download_file_range_positive")?;
-        let storage = create_storage()?;
-        let upload_name = "upload_1";
-        let upload_target = upload_dummy_file(&repo_harness, &storage, upload_name).await?;
-
-        let mut full_range_bytes = io::BufWriter::new(std::io::Cursor::new(Vec::new()));
-        storage
-            .download_range(&upload_target, 0, None, &mut full_range_bytes)
-            .await?;
-        full_range_bytes.flush().await?;
-        assert_eq!(
-            dummy_contents(upload_name),
-            String::from_utf8(full_range_bytes.into_inner().into_inner())?,
-            "Download full range should return the whole upload"
-        );
-
-        let mut zero_range_bytes = io::BufWriter::new(std::io::Cursor::new(Vec::new()));
-        let same_byte = 1_000_000_000;
-        storage
-            .download_range(
-                &upload_target,
-                same_byte,
-                Some(same_byte + 1), // exclusive end
-                &mut zero_range_bytes,
-            )
-            .await?;
-        zero_range_bytes.flush().await?;
-        assert!(
-            zero_range_bytes.into_inner().into_inner().is_empty(),
-            "Zero byte range should not download any part of the file"
-        );
-
-        let uploaded_bytes = dummy_contents(upload_name).into_bytes();
-        let (first_part_local, second_part_local) = uploaded_bytes.split_at(3);
-
-        let mut first_part_remote = io::BufWriter::new(std::io::Cursor::new(Vec::new()));
-        storage
-            .download_range(
-                &upload_target,
-                0,
-                Some(first_part_local.len() as u64),
-                &mut first_part_remote,
-            )
-            .await?;
-        first_part_remote.flush().await?;
-        let first_part_remote = first_part_remote.into_inner().into_inner();
-        assert_eq!(
-            first_part_local,
-            first_part_remote.as_slice(),
-            "First part bytes should be returned when requrested"
-        );
-
-        let mut second_part_remote = io::BufWriter::new(std::io::Cursor::new(Vec::new()));
-        storage
-            .download_range(
-                &upload_target,
-                first_part_local.len() as u64,
-                Some((first_part_local.len() + second_part_local.len()) as u64),
-                &mut second_part_remote,
-            )
-            .await?;
-        second_part_remote.flush().await?;
-        let second_part_remote = second_part_remote.into_inner().into_inner();
-        assert_eq!(
-            second_part_local,
-            second_part_remote.as_slice(),
-            "Second part bytes should be returned when requrested"
-        );
-
-        Ok(())
-    }
-
-    #[tokio::test]
-    async fn download_file_range_negative() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("download_file_range_negative")?;
-        let storage = create_storage()?;
-        let upload_name = "upload_1";
-        let upload_target = upload_dummy_file(&repo_harness, &storage, upload_name).await?;
-
-        let start = 10000;
-        let end = 234;
-        assert!(start > end, "Should test an incorrect range");
-        match storage
-            .download_range(&upload_target, start, Some(end), &mut io::sink())
-            .await
-        {
-            Ok(_) => panic!("Should not allow downloading wrong ranges"),
-            Err(e) => {
-                let error_string = e.to_string();
-                assert!(error_string.contains("Invalid range"));
-                assert!(error_string.contains(&start.to_string()));
-                assert!(error_string.contains(&end.to_string()));
-            }
-        }
-
-        let non_existing_path = PathBuf::from("somewhere").join("else");
-        match storage
-            .download_range(&non_existing_path, 1, Some(3), &mut io::sink())
-            .await
-        {
-            Ok(_) => panic!("Should not allow downloading non-existing storage file ranges"),
-            Err(e) => {
-                let error_string = e.to_string();
-                assert!(error_string.contains("does not exist"));
-                assert!(error_string.contains(&non_existing_path.display().to_string()));
-            }
-        }
-        Ok(())
-    }
-
-    #[tokio::test]
-    async fn delete_file() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("delete_file")?;
-        let storage = create_storage()?;
-        let upload_name = "upload_1";
-        let upload_target = upload_dummy_file(&repo_harness, &storage, upload_name).await?;
-
-        storage.delete(&upload_target).await?;
-        assert!(storage.list().await?.is_empty());
-
-        match storage.delete(&upload_target).await {
-            Ok(()) => panic!("Should not allow deleting non-existing storage files"),
-            Err(e) => {
-                let error_string = e.to_string();
-                assert!(error_string.contains("does not exist"));
-                assert!(error_string.contains(&upload_target.display().to_string()));
-            }
-        }
-        Ok(())
-    }
-
-    async fn upload_dummy_file(
-        harness: &RepoHarness,
-        storage: &LocalFs,
-        name: &str,
-    ) -> anyhow::Result<PathBuf> {
-        let timeline_path = harness.timeline_path(&TIMELINE_ID);
-        let relative_timeline_path = timeline_path.strip_prefix(&harness.conf.workdir)?;
-        let storage_path = storage.root.join(relative_timeline_path).join(name);
-        storage
-            .upload(
-                create_file_for_upload(
-                    &storage.pageserver_workdir.join(name),
-                    &dummy_contents(name),
-                )
-                .await?,
-                &storage_path,
-            )
-            .await?;
-        Ok(storage_path)
-    }
-
-    async fn create_file_for_upload(
-        path: &Path,
-        contents: &str,
-    ) -> anyhow::Result<io::BufReader<fs::File>> {
-        std::fs::create_dir_all(path.parent().unwrap())?;
-        let mut file_for_writing = std::fs::OpenOptions::new()
-            .write(true)
-            .create_new(true)
-            .open(path)?;
-        write!(file_for_writing, "{}", contents)?;
-        drop(file_for_writing);
-        Ok(io::BufReader::new(
-            fs::OpenOptions::new().read(true).open(&path).await?,
-        ))
-    }
-
-    fn dummy_contents(name: &str) -> String {
-        format!("contents for {}", name)
-    }
-
-    async fn list_files_sorted(storage: &LocalFs) -> anyhow::Result<Vec<PathBuf>> {
-        let mut files = storage.list().await?;
-        files.sort();
-        Ok(files)
-    }
-}

pageserver/src/remote_storage/rust_s3.rs

@@ -1,373 +0,0 @@
-//! AWS S3 storage wrapper around `rust_s3` library.
-//! Currently does not allow multiple pageservers to use the same bucket concurrently: objects are
-//! placed in the root of the bucket.
-
-use std::path::{Path, PathBuf};
-
-use anyhow::Context;
-use s3::{bucket::Bucket, creds::Credentials, region::Region};
-use tokio::io::{self, AsyncWriteExt};
-
-use crate::{
-    remote_storage::{strip_path_prefix, RemoteStorage},
-    S3Config,
-};
-
-const S3_FILE_SEPARATOR: char = '/';
-
-#[derive(Debug, Eq, PartialEq)]
-pub struct S3ObjectKey(String);
-
-impl S3ObjectKey {
-    fn key(&self) -> &str {
-        &self.0
-    }
-
-    fn download_destination(&self, pageserver_workdir: &Path) -> PathBuf {
-        pageserver_workdir.join(self.0.split(S3_FILE_SEPARATOR).collect::<PathBuf>())
-    }
-}
-
-/// AWS S3 storage.
-pub struct S3 {
-    pageserver_workdir: &'static Path,
-    bucket: Bucket,
-}
-
-impl S3 {
-    /// Creates the storage, errors if incorrect AWS S3 configuration provided.
-    pub fn new(aws_config: &S3Config, pageserver_workdir: &'static Path) -> anyhow::Result<Self> {
-        let region = aws_config
-            .bucket_region
-            .parse::<Region>()
-            .context("Failed to parse the s3 region from config")?;
-        let credentials = Credentials::new(
-            aws_config.access_key_id.as_deref(),
-            aws_config.secret_access_key.as_deref(),
-            None,
-            None,
-            None,
-        )
-        .context("Failed to create the s3 credentials")?;
-        Ok(Self {
-            bucket: Bucket::new_with_path_style(
-                aws_config.bucket_name.as_str(),
-                region,
-                credentials,
-            )
-            .context("Failed to create the s3 bucket")?,
-            pageserver_workdir,
-        })
-    }
-}
-
-#[async_trait::async_trait]
-impl RemoteStorage for S3 {
-    type StoragePath = S3ObjectKey;
-
-    fn storage_path(&self, local_path: &Path) -> anyhow::Result<Self::StoragePath> {
-        let relative_path = strip_path_prefix(self.pageserver_workdir, local_path)?;
-        let mut key = String::new();
-        for segment in relative_path {
-            key.push(S3_FILE_SEPARATOR);
-            key.push_str(&segment.to_string_lossy());
-        }
-        Ok(S3ObjectKey(key))
-    }
-
-    fn local_path(&self, storage_path: &Self::StoragePath) -> anyhow::Result<PathBuf> {
-        Ok(storage_path.download_destination(self.pageserver_workdir))
-    }
-
-    async fn list(&self) -> anyhow::Result<Vec<Self::StoragePath>> {
-        let list_response = self
-            .bucket
-            .list(String::new(), None)
-            .await
-            .context("Failed to list s3 objects")?;
-
-        Ok(list_response
-            .into_iter()
-            .flat_map(|response| response.contents)
-            .map(|s3_object| S3ObjectKey(s3_object.key))
-            .collect())
-    }
-
-    async fn upload(
-        &self,
-        mut from: impl io::AsyncRead + Unpin + Send + Sync + 'static,
-        to: &Self::StoragePath,
-    ) -> anyhow::Result<()> {
-        let mut upload_contents = io::BufWriter::new(std::io::Cursor::new(Vec::new()));
-        io::copy(&mut from, &mut upload_contents)
-            .await
-            .context("Failed to read the upload contents")?;
-        upload_contents
-            .flush()
-            .await
-            .context("Failed to read the upload contents")?;
-        let upload_contents = upload_contents.into_inner().into_inner();
-
-        let (_, code) = self
-            .bucket
-            .put_object(to.key(), &upload_contents)
-            .await
-            .with_context(|| format!("Failed to create s3 object with key {}", to.key()))?;
-        if code != 200 {
-            Err(anyhow::format_err!(
-                "Received non-200 exit code during creating object with key '{}', code: {}",
-                to.key(),
-                code
-            ))
-        } else {
-            Ok(())
-        }
-    }
-
-    async fn download(
-        &self,
-        from: &Self::StoragePath,
-        to: &mut (impl io::AsyncWrite + Unpin + Send + Sync),
-    ) -> anyhow::Result<()> {
-        let (data, code) = self
-            .bucket
-            .get_object(from.key())
-            .await
-            .with_context(|| format!("Failed to download s3 object with key {}", from.key()))?;
-        if code != 200 {
-            Err(anyhow::format_err!(
-                "Received non-200 exit code during downloading object, code: {}",
-                code
-            ))
-        } else {
-            // we don't have to write vector into the destination this way, `to_write_all` would be enough.
-            // but we want to prepare for migration on `rusoto`, that has a streaming HTTP body instead here, with
-            // which it makes more sense to use `io::copy`.
-            io::copy(&mut data.as_slice(), to)
-                .await
-                .context("Failed to write downloaded data into the destination buffer")?;
-            Ok(())
-        }
-    }
-
-    async fn download_range(
-        &self,
-        from: &Self::StoragePath,
-        start_inclusive: u64,
-        end_exclusive: Option<u64>,
-        to: &mut (impl io::AsyncWrite + Unpin + Send + Sync),
-    ) -> anyhow::Result<()> {
-        // S3 accepts ranges as https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35
-        // and needs both ends to be exclusive
-        let end_inclusive = end_exclusive.map(|end| end.saturating_sub(1));
-        let (data, code) = self
-            .bucket
-            .get_object_range(from.key(), start_inclusive, end_inclusive)
-            .await
-            .with_context(|| format!("Failed to download s3 object with key {}", from.key()))?;
-        if code != 206 {
-            Err(anyhow::format_err!(
-                "Received non-206 exit code during downloading object range, code: {}",
-                code
-            ))
-        } else {
-            // see `download` function above for the comment on why `Vec<u8>` buffer is copied this way
-            io::copy(&mut data.as_slice(), to)
-                .await
-                .context("Failed to write downloaded range into the destination buffer")?;
-            Ok(())
-        }
-    }
-
-    async fn delete(&self, path: &Self::StoragePath) -> anyhow::Result<()> {
-        let (_, code) = self
-            .bucket
-            .delete_object(path.key())
-            .await
-            .with_context(|| format!("Failed to delete s3 object with key {}", path.key()))?;
-        if code != 204 {
-            Err(anyhow::format_err!(
-                "Received non-204 exit code during deleting object with key '{}', code: {}",
-                path.key(),
-                code
-            ))
-        } else {
-            Ok(())
-        }
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use crate::{
-        layered_repository::metadata::METADATA_FILE_NAME,
-        repository::repo_harness::{RepoHarness, TIMELINE_ID},
-    };
-
-    use super::*;
-
-    #[test]
-    fn download_destination() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("download_destination")?;
-
-        let local_path = repo_harness.timeline_path(&TIMELINE_ID).join("test_name");
-        let relative_path = local_path.strip_prefix(&repo_harness.conf.workdir)?;
-
-        let key = S3ObjectKey(format!(
-            "{}{}",
-            S3_FILE_SEPARATOR,
-            relative_path
-                .iter()
-                .map(|segment| segment.to_str().unwrap())
-                .collect::<Vec<_>>()
-                .join(&S3_FILE_SEPARATOR.to_string()),
-        ));
-
-        assert_eq!(
-            local_path,
-            key.download_destination(&repo_harness.conf.workdir),
-            "Download destination should consist of s3 path joined with the pageserver workdir prefix"
-        );
-
-        Ok(())
-    }
-
-    #[test]
-    fn storage_path_positive() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("storage_path_positive")?;
-
-        let segment_1 = "matching";
-        let segment_2 = "file";
-        let local_path = &repo_harness.conf.workdir.join(segment_1).join(segment_2);
-        let expected_key = S3ObjectKey(format!(
-            "{SEPARATOR}{}{SEPARATOR}{}",
-            segment_1,
-            segment_2,
-            SEPARATOR = S3_FILE_SEPARATOR,
-        ));
-
-        let actual_key = dummy_storage(&repo_harness.conf.workdir)
-            .storage_path(local_path)
-            .expect("Matching path should map to S3 path normally");
-        assert_eq!(
-            expected_key,
-            actual_key,
-            "S3 key from the matching path should contain all segments after the workspace prefix, separated with S3 separator"
-        );
-
-        Ok(())
-    }
-
-    #[test]
-    fn storage_path_negatives() -> anyhow::Result<()> {
-        #[track_caller]
-        fn storage_path_error(storage: &S3, mismatching_path: &Path) -> String {
-            match storage.storage_path(mismatching_path) {
-                Ok(wrong_key) => panic!(
-                    "Expected path '{}' to error, but got S3 key: {:?}",
-                    mismatching_path.display(),
-                    wrong_key,
-                ),
-                Err(e) => e.to_string(),
-            }
-        }
-
-        let repo_harness = RepoHarness::create("storage_path_negatives")?;
-        let storage = dummy_storage(&repo_harness.conf.workdir);
-
-        let error_message = storage_path_error(&storage, &repo_harness.conf.workdir);
-        assert!(
-            error_message.contains("Prefix and the path are equal"),
-            "Message '{}' does not contain the required string",
-            error_message
-        );
-
-        let mismatching_path = PathBuf::from("somewhere").join("else");
-        let error_message = storage_path_error(&storage, &mismatching_path);
-        assert!(
-            error_message.contains(mismatching_path.to_str().unwrap()),
-            "Error should mention wrong path"
-        );
-        assert!(
-            error_message.contains(repo_harness.conf.workdir.to_str().unwrap()),
-            "Error should mention server workdir"
-        );
-        assert!(
-            error_message.contains("is not prefixed with"),
-            "Message '{}' does not contain a required string",
-            error_message
-        );
-
-        Ok(())
-    }
-
-    #[test]
-    fn local_path_positive() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("local_path_positive")?;
-        let storage = dummy_storage(&repo_harness.conf.workdir);
-        let timeline_dir = repo_harness.timeline_path(&TIMELINE_ID);
-        let relative_timeline_path = timeline_dir.strip_prefix(&repo_harness.conf.workdir)?;
-
-        let s3_key = create_s3_key(&relative_timeline_path.join("not a metadata"));
-        assert_eq!(
-            s3_key.download_destination(&repo_harness.conf.workdir),
-            storage
-                .local_path(&s3_key)
-                .expect("For a valid input, valid S3 info should be parsed"),
-            "Should be able to parse metadata out of the correctly named remote delta file"
-        );
-
-        let s3_key = create_s3_key(&relative_timeline_path.join(METADATA_FILE_NAME));
-        assert_eq!(
-            s3_key.download_destination(&repo_harness.conf.workdir),
-            storage
-                .local_path(&s3_key)
-                .expect("For a valid input, valid S3 info should be parsed"),
-            "Should be able to parse metadata out of the correctly named remote metadata file"
-        );
-
-        Ok(())
-    }
-
-    #[test]
-    fn download_destination_matches_original_path() -> anyhow::Result<()> {
-        let repo_harness = RepoHarness::create("download_destination_matches_original_path")?;
-        let original_path = repo_harness.timeline_path(&TIMELINE_ID).join("some name");
-
-        let dummy_storage = dummy_storage(&repo_harness.conf.workdir);
-
-        let key = dummy_storage.storage_path(&original_path)?;
-        let download_destination = dummy_storage.local_path(&key)?;
-
-        assert_eq!(
-            original_path, download_destination,
-            "'original path -> storage key -> matching fs path' transformation should produce the same path as the input one for the correct path"
-        );
-
-        Ok(())
-    }
-
-    fn dummy_storage(pageserver_workdir: &'static Path) -> S3 {
-        S3 {
-            pageserver_workdir,
-            bucket: Bucket::new(
-                "dummy-bucket",
-                "us-east-1".parse().unwrap(),
-                Credentials::anonymous().unwrap(),
-            )
-            .unwrap(),
-        }
-    }
-
-    fn create_s3_key(relative_file_path: &Path) -> S3ObjectKey {
-        S3ObjectKey(
-            relative_file_path
-                .iter()
-                .fold(String::new(), |mut path_string, segment| {
-                    path_string.push(S3_FILE_SEPARATOR);
-                    path_string.push_str(segment.to_str().unwrap());
-                    path_string
-                }),
-        )
-    }
-}

pageserver/src/restore_s3.rs

@@ -0,0 +1,278 @@
+//
+// Restore chunks from S3
+//
+// This runs once at Page Server startup. It loads all the "base images" from
+// S3 into the in-memory page cache. It also initializes the "last valid LSN"
+// in the page cache to the LSN of the base image, so that when the WAL receiver
+// is started, it starts streaming from that LSN.
+//
+
+use bytes::{Buf, BytesMut};
+use log::*;
+use regex::Regex;
+use std::env;
+use std::fmt;
+
+use s3::bucket::Bucket;
+use s3::creds::Credentials;
+use s3::region::Region;
+use s3::S3Error;
+
+use tokio::runtime;
+
+use futures::future;
+
+use crate::{page_cache, PageServerConf};
+
+struct Storage {
+    region: Region,
+    credentials: Credentials,
+    bucket: String,
+}
+
+pub fn restore_main(conf: &PageServerConf) {
+    // Create a new thread pool
+    let runtime = runtime::Runtime::new().unwrap();
+
+    runtime.block_on(async {
+        let result = restore_chunk(conf).await;
+
+        match result {
+            Ok(_) => {}
+            Err(err) => {
+                error!("S3 error: {}", err);
+            }
+        }
+    });
+}
+
+//
+// Restores one chunk from S3.
+//
+// 1. Fetch the last base image >= given LSN
+// 2. Fetch all WAL
+//
+// Load it all into the page cache.
+//
+async fn restore_chunk(conf: &PageServerConf) -> Result<(), S3Error> {
+    let backend = Storage {
+        region: Region::Custom {
+            region: env::var("S3_REGION").unwrap(),
+            endpoint: env::var("S3_ENDPOINT").unwrap(),
+        },
+        credentials: Credentials::new(
+            Some(&env::var("S3_ACCESSKEY").unwrap()),
+            Some(&env::var("S3_SECRET").unwrap()),
+            None,
+            None,
+            None,
+        )
+        .unwrap(),
+        bucket: "zenith-testbucket".to_string(),
+    };
+
+    info!("Restoring from S3...");
+
+    // Create Bucket in REGION for BUCKET
+    let bucket = Bucket::new_with_path_style(&backend.bucket, backend.region, backend.credentials)?;
+
+    // List out contents of directory
+    let results: Vec<s3::serde_types::ListBucketResult> = bucket
+        .list("relationdata/".to_string(), Some("".to_string()))
+        .await?;
+
+    // TODO: get that from backup
+    let sys_id: u64 = 42;
+    let mut oldest_lsn = 0;
+    let mut slurp_futures: Vec<_> = Vec::new();
+
+    for result in results {
+        for object in result.contents {
+            // Download every relation file, slurping them into memory
+
+            let key = object.key;
+            let relpath = key.strip_prefix("relationdata/").unwrap();
+
+            let parsed = parse_rel_file_path(&relpath);
+
+            match parsed {
+                Ok(p) => {
+                    if oldest_lsn == 0 || p.lsn < oldest_lsn {
+                        oldest_lsn = p.lsn;
+                    }
+                    let b = bucket.clone();
+                    let f = slurp_base_file(conf, sys_id, b, key.to_string(), p);
+
+                    slurp_futures.push(f);
+                }
+                Err(e) => {
+                    warn!("unrecognized file: {} ({})", relpath, e);
+                }
+            };
+        }
+    }
+
+    if oldest_lsn == 0 {
+        panic!("no base backup found");
+    }
+
+    let pcache = page_cache::get_pagecache(conf, sys_id);
+    pcache.init_valid_lsn(oldest_lsn);
+
+    info!("{} files to restore...", slurp_futures.len());
+
+    future::join_all(slurp_futures).await;
+    info!("restored!");
+
+    Ok(())
+}
+
+// From pg_tablespace_d.h
+//
+// FIXME: we'll probably need these elsewhere too, move to some common location
+const DEFAULTTABLESPACE_OID: u32 = 1663;
+const GLOBALTABLESPACE_OID: u32 = 1664;
+
+#[derive(Debug)]
+struct ParsedBaseImageFileName {
+    pub spcnode: u32,
+    pub dbnode: u32,
+    pub relnode: u32,
+    pub forknum: u8,
+    pub segno: u32,
+
+    pub lsn: u64,
+}
+
+// formats:
+// <oid>
+// <oid>_<fork name>
+// <oid>.<segment number>
+// <oid>_<fork name>.<segment number>
+
+fn parse_filename(fname: &str) -> Result<(u32, u8, u32, u64), FilePathError> {
+    let re = Regex::new(r"^(?P<relnode>\d+)(_(?P<forkname>[a-z]+))?(\.(?P<segno>\d+))?_(?P<lsnhi>[[:xdigit:]]{8})(?P<lsnlo>[[:xdigit:]]{8})$").unwrap();
+
+    let caps = re
+        .captures(fname)
+        .ok_or_else(|| FilePathError::new("invalid relation data file name"))?;
+
+    let relnode_str = caps.name("relnode").unwrap().as_str();
+    let relnode: u32 = relnode_str.parse()?;
+
+    let forkname = caps.name("forkname").map(|f| f.as_str());
+    let forknum = forkname_to_forknum(forkname)?;
+
+    let segno_match = caps.name("segno");
+    let segno = if segno_match.is_none() {
+        0
+    } else {
+        segno_match.unwrap().as_str().parse::<u32>()?
+    };
+
+    let lsn_hi: u64 = caps.name("lsnhi").unwrap().as_str().parse()?;
+    let lsn_lo: u64 = caps.name("lsnlo").unwrap().as_str().parse()?;
+    let lsn = lsn_hi << 32 | lsn_lo;
+
+    Ok((relnode, forknum, segno, lsn))
+}
+
+fn parse_rel_file_path(path: &str) -> Result<ParsedBaseImageFileName, FilePathError> {
+    /*
+     * Relation data files can be in one of the following directories:
+     *
+     * global/
+     *		shared relations
+     *
+     * base/<db oid>/
+     *		regular relations, default tablespace
+     *
+     * pg_tblspc/<tblspc oid>/<tblspc version>/
+     *		within a non-default tablespace (the name of the directory
+     *		depends on version)
+     *
+     * And the relation data files themselves have a filename like:
+     *
+     * <oid>.<segment number>
+     */
+    if let Some(fname) = path.strip_prefix("global/") {
+        let (relnode, forknum, segno, lsn) = parse_filename(fname)?;
+
+        Ok(ParsedBaseImageFileName {
+            spcnode: GLOBALTABLESPACE_OID,
+            dbnode: 0,
+            relnode,
+            forknum,
+            segno,
+            lsn,
+        })
+    } else if let Some(dbpath) = path.strip_prefix("base/") {
+        let mut s = dbpath.split("/");
+        let dbnode_str = s
+            .next()
+            .ok_or_else(|| FilePathError::new("invalid relation data file name"))?;
+        let dbnode: u32 = dbnode_str.parse()?;
+        let fname = s
+            .next()
+            .ok_or_else(|| FilePathError::new("invalid relation data file name"))?;
+        if s.next().is_some() {
+            return Err(FilePathError::new("invalid relation data file name"));
+        };
+
+        let (relnode, forknum, segno, lsn) = parse_filename(fname)?;
+
+        Ok(ParsedBaseImageFileName {
+            spcnode: DEFAULTTABLESPACE_OID,
+            dbnode,
+            relnode,
+            forknum,
+            segno,
+            lsn,
+        })
+    } else if let Some(_) = path.strip_prefix("pg_tblspc/") {
+        // TODO
+        Err(FilePathError::new("tablespaces not supported"))
+    } else {
+        Err(FilePathError::new("invalid relation data file name"))
+    }
+}
+
+//
+// Load a base file from S3, and insert it into the page cache
+//
+async fn slurp_base_file(
+    conf: &PageServerConf,
+    sys_id: u64,
+    bucket: Bucket,
+    s3path: String,
+    parsed: ParsedBaseImageFileName,
+) {
+    // FIXME: rust-s3 opens a new connection for each request. Should reuse
+    // the reqwest::Client object. But that requires changes to rust-s3 itself.
+    let (data, code) = bucket.get_object(s3path.clone()).await.unwrap();
+
+    trace!("got response: {} on {}", code, &s3path);
+    assert_eq!(200, code);
+
+    let mut bytes = BytesMut::from(data.as_slice()).freeze();
+
+    let mut blknum: u32 = parsed.segno * (1024 * 1024 * 1024 / pg_constants::BLCKSZ as u32);
+
+    let pcache = page_cache::get_pagecache(conf, sys_id);
+
+    while bytes.remaining() >= 8192 {
+        let tag = page_cache::BufferTag {
+            rel: page_cache::RelTag {
+                spcnode: parsed.spcnode,
+                dbnode: parsed.dbnode,
+                relnode: parsed.relnode,
+                forknum: parsed.forknum,
+            },
+            blknum,
+        };
+
+        pcache.put_page_image(tag, parsed.lsn, bytes.copy_to_bytes(8192));
+
+        blknum += 1;
+    }
+}