Like #9931 but without rebasing upstream just yet, to try and minimise
the differences.
Removes all proxy-specific commits from the rust-postgres fork, now that
proxy no longer depends on them. Merging upstream changes to come later.
Closes#9387.
## Problem
`BufferedWriter` cannot proceed while the owned buffer is flushing to
disk. We want to implement double buffering so that the flush can happen
in the background. See #9387.
## Summary of changes
- Maintain two owned buffers in `BufferedWriter`.
- The writer is in charge of copying the data into owned, aligned
buffer, once full, submit it to the flush task.
- The flush background task is in charge of flushing the owned buffer to
disk, and returned the buffer to the writer for reuse.
- The writer and the flush background task communicate through a
bi-directional channel.
For in-memory layer, we also need to be able to read from the buffered
writer in `get_values_reconstruct_data`. To handle this case, we did the
following
- Use replace `VirtualFile::write_all` with `VirtualFile::write_all_at`,
and use `Arc` to share it between writer and background task.
- leverage `IoBufferMut::freeze` to get a cheaply clonable `IoBuffer`,
one clone will be submitted to the channel, the other clone will be
saved within the writer to serve reads. When we want to reuse the
buffer, we can invoke `IoBuffer::into_mut`, which gives us back the
mutable aligned buffer.
- InMemoryLayer reads is now aware of the maybe_flushed part of the
buffer.
**Caveat**
- We removed the owned version of write, because this interface does not
work well with buffer alignment. The result is that without direct IO
enabled,
[`download_object`](https://github.com/neondatabase/neon/blob/a439d57050dafd603d24e001215213eb5246a029/pageserver/src/tenant/remote_timeline_client/download.rs#L243)
does one more memcpy than before this PR due to the switch to use
`_borrowed` version of the write.
- "Bypass aligned part of write" could be implemented later to avoid
large amount of memcpy.
**Testing**
- use an oneshot channel based control mechanism to make flush behavior
deterministic in test.
- test reading from `EphemeralFile` when the last submitted buffer is
not flushed, in-progress, and done flushing to disk.
## Performance
We see performance improvement for small values, and regression on big
values, likely due to being CPU bound + disk write latency.
[Results](https://www.notion.so/neondatabase/Benchmarking-New-BufferedWriter-11-20-2024-143f189e0047805ba99acda89f984d51?pvs=4)
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We have a scale test for the storage controller which also acts as a
good stress test for scheduling stability. However, it created nodes
with no AZs set.
## Summary of changes
- Bump node count to 6 and set AZs on them.
This is a precursor to other AZ-related PRs, to make sure any new code
that's landed is getting scale tested in an AZ-aware environment.
## Problem
We practice a manual release flow for the compute module. This will
allow automation of the compute release process.
## Summary of changes
The workflow was modified to make a compute release automatically on the
branch release-compute.
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
Reqwest errors don't include details about the inner source error. This
means that we get opaque errors like:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config)
```
Instead of the more helpful:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config): operation timed out
```
Touches #9801.
## Summary of changes
Include the source error for `reqwest::Error` wherever it's displayed.
## Problem
When client specifies `application_name`, pgbouncer propagates it to the
Postgres. Yet, if client doesn't do it, we have hard time figuring out
who opens a lot of Postgres connections (including the `cloud_admin`
ones).
See this investigation as an example:
https://neondb.slack.com/archives/C0836R0RZ0D
## Summary of changes
I haven't found this documented, but it looks like pgbouncer accepts
standard Postgres connstring parameters in the connstring in the
`[databases]` section, so put the default `application_name=pgbouncer`
there. That way, we will always see who opens Postgres connections. I
did tests, and if client specifies a `application_name`, pgbouncer
overrides this default, so it only works if it's not specified or set to
blank `&application_name=` in the connection string.
This is the last place we could potentially open some Postgres
connections without `application_name`. Everything else should be either
of two:
1. Direct client connections without `application_name`, but these
should be strictly non-`cloud_admin` ones
2. Some ad-hoc internal connections, so if we see spikes of unidentified
`cloud_admin` connections, we will need to investigate it again.
Fixesneondatabase/cloud#20948
(stacked on #9990 and #9995)
Partially fixes#1287 with a custom option field to enable the fixed
behaviour. This allows us to gradually roll out the fix without silently
changing the observed behaviour for our customers.
related to https://github.com/neondatabase/cloud/issues/15284
## Problem
During deploys, we see a lot of 500 errors due to heapmap uploads for
inactive tenants. These should be 503s instead.
Resolves#9574.
## Summary of changes
Make the secondary tenant scheduler use `ApiError` rather than
`anyhow::Error`, to propagate the tenant error and convert it to an
appropriate status code.
## Problem
we tried different parallelism settings for ingest bench
## Summary of changes
the following settings seem optimal after merging
- SK side Wal filtering
- batched getpages
Settings:
- effective_io_concurrency 100
- concurrency limit 200 (different from Prod!)
- jobs 4, maintenance workers 7
- 10 GB chunk size
## Problem
```
2024-12-03T15:42:46.5978335Z + poetry run python /__w/neon/neon/scripts/ingest_perf_test_result.py --ingest /__w/neon/neon/test_runner/perf-report-local
2024-12-03T15:42:49.5325077Z Traceback (most recent call last):
2024-12-03T15:42:49.5325603Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 165, in <module>
2024-12-03T15:42:49.5326029Z main()
2024-12-03T15:42:49.5326316Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 155, in main
2024-12-03T15:42:49.5326739Z ingested = ingest_perf_test_result(cur, item, recorded_at_timestamp)
2024-12-03T15:42:49.5327488Z ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2024-12-03T15:42:49.5327914Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 99, in ingest_perf_test_result
2024-12-03T15:42:49.5328321Z psycopg2.extras.execute_values(
2024-12-03T15:42:49.5328940Z File "/github/home/.cache/pypoetry/virtualenvs/non-package-mode-_pxWMzVK-py3.11/lib/python3.11/site-packages/psycopg2/extras.py", line 1299, in execute_values
2024-12-03T15:42:49.5335618Z cur.execute(b''.join(parts))
2024-12-03T15:42:49.5335967Z psycopg2.errors.InvalidTextRepresentation: invalid input syntax for type numeric: "concurrent-futures"
2024-12-03T15:42:49.5336287Z LINE 57: 'concurrent-futures',
2024-12-03T15:42:49.5336462Z ^
```
## Summary of changes
- `test_page_service_batching`: save non-numeric params as `labels`
- Add a runtime check that `metric_value` is NUMERIC
Before this PR, some override callbacks used `.default()`, others
used `.setdefault()`.
As of this PR, all callbacks use `.setdefault()` which I think is least
prone to failure.
Aligning on a single way will set the right example for future tests
that need such customization.
The `test_pageserver_getpage_throttle.py` technically is a change in
behavior: before, it replaced the `tenant_config` field, now it just
configures the throttle. This is what I believe is intended anyway.
Support tenant manifests in the storage scrubber:
* list the manifests, order them by generation
* delete all manifests except for the two most recent generations
* for the latest manifest: try parsing it.
I've tested this patch by running the against a staging bucket and it
successfully deleted stuff (and avoided deleting the latest two
generations).
In follow-up work, we might want to also check some invariants of the
manifest, as mentioned in #8088.
Part of #9386
Part of #8088
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The Pageserver signal handler would only respond to a single signal and
initiate shutdown. Subsequent signals were ignored. This meant that a
`SIGQUIT` sent after a `SIGTERM` had no effect (e.g. in the case of a
slow or stalled shutdown). The `test_runner` uses this to force shutdown
if graceful shutdown is slow.
Touches #9740.
## Summary of changes
Keep responding to signals after the initial shutdown signal has been
received.
Arguably, the `test_runner` should also use `SIGKILL` rather than
`SIGQUIT` in this case, but it seems reasonable to respond to `SIGQUIT`
regardless.
Keeping the `mock` postgres cplane adaptor using "stock" tokio-postgres
allows us to remove a lot of dead weight from our actual postgres
connection logic.
## Problem
We saw a peculiar case where a pageserver apparently got a 0-tenant
response to `/re-attach` but we couldn't see the request landing on a
storage controller. It was hard to confirm retrospectively that the
pageserver was configured properly at the moment it sent the request.
## Summary of changes
- Log the URL to which we are sending the request
- Log the NodeId and metadata that we sent
## Problem
Sharded tenants should be run in a single AZ for best performance, so
that computes have AZ-local latency to all the shards.
Part of https://github.com/neondatabase/neon/issues/8264
## Summary of changes
- When we split a tenant, instead of updating each shard's preferred AZ
to wherever it is scheduled, propagate the preferred AZ from the parent.
- Drop the check in `test_shard_preferred_azs` that asserts shards end
up in their preferred AZ: this will not be true again until the
optimize_attachment logic is updated to make this so. The existing check
wasn't testing anything about scheduling, it was just asserting that we
set preferred AZ in a way that matches the way things happen to be
scheduled at time of split.
## Problem
In the batching PR
- https://github.com/neondatabase/neon/pull/9870
I stopped deducting the time-spent-in-throttle fro latency metrics,
i.e.,
- smgr latency metrics (`SmgrOpTimer`)
- basebackup latency (+scan latency, which I think is part of
basebackup).
The reason for stopping the deduction was that with the introduction of
batching, the trick with tracking time-spent-in-throttle inside
RequestContext and swap-replacing it from the `impl Drop for
SmgrOpTimer` no longer worked with >1 requests in a batch.
However, deducting time-spent-in-throttle is desirable because our
internal latency SLO definition does not account for throttling.
## Summary of changes
- Redefine throttling to be a page_service pagestream request throttle
instead of a throttle for repository `Key` reads through `Timeline::get`
/ `Timeline::get_vectored`.
- This means reads done by `basebackup` are no longer subject to any
throttle.
- The throttle applies after batching, before handling of the request.
- Drive-by fix: make throttle sensitive to cancellation.
- Rename metric label `kind` from `timeline_get` to `pagestream` to
reflect the new scope of throttling.
To avoid config format breakage, we leave the config field named
`timeline_get_throttle` and ignore the `task_kinds` field.
This will be cleaned up in a future PR.
## Trade-Offs
Ideally, we would apply the throttle before reading a request off the
connection, so that we queue the minimal amount of work inside the
process.
However, that's not possible because we need to do shard routing.
The redefinition of the throttle to limit pagestream request rate
instead of repository `Key` rate comes with several downsides:
- We're no longer able to use the throttle mechanism for other other
tasks, e.g. image layer creation.
However, in practice, we never used that capability anyways.
- We no longer throttle basebackup.
## Problem
`test_sharded_ingest` ingests a lot of data, which can cause shutdown to
be slow e.g. due to local "S3 uploads" or compactions. This can cause
test flakes during teardown.
Resolves#9740.
## Summary of changes
Perform an immediate shutdown of the cluster.
## Problem
We don't have good observability for memory usage. This would be useful
e.g. to debug OOM incidents or optimize performance or resource usage.
We would also like to use continuous profiling with e.g. [Grafana Cloud
Profiles](https://grafana.com/products/cloud/profiles-for-continuous-profiling/)
(see https://github.com/neondatabase/cloud/issues/14888).
This PR is intended as a proof of concept, to try it out in staging and
drive further discussions about profiling more broadly.
Touches https://github.com/neondatabase/neon/issues/9534.
Touches https://github.com/neondatabase/cloud/issues/14888.
Depends on #9779.
Depends on #9780.
## Summary of changes
Adds a HTTP route `/profile/heap` that takes a heap profile and returns
it. Query parameters:
* `format`: output format (`jemalloc` or `pprof`; default `pprof`).
Unlike CPU profiles (see #9764), heap profiles are not symbolized and
require the original binary to translate addresses to function names. To
make this work with Grafana, we'll probably have to symbolize the
process server-side -- this is left as future work, as is other output
formats like SVG.
Heap profiles don't work on macOS due to limitations in jemalloc.
## Problem
The extensions for Postgres v17 are ready but we do not test the
extensions shipped with v17
## Summary of changes
Build the test image based on Postgres v17. Run the tests for v17.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
This PR
- fixes smgr metrics https://github.com/neondatabase/neon/issues/9925
- adds an additional startup log line logging the current batching
config
- adds a histogram of batch sizes global and per-tenant
- adds a metric exposing the current batching config
The issue described #9925 is that before this PR, request latency was
only observed *after* batching.
This means that smgr latency metrics (most importantly getpage latency)
don't account for
- `wait_lsn` time
- time spent waiting for batch to fill up / the executor stage to pick
up the batch.
The fix is to use a per-request batching timer, like we did before the
initial batching PR.
We funnel those timers through the entire request lifecycle.
I noticed that even before the initial batching changes, we weren't
accounting for the time spent writing & flushing the response to the
wire.
This PR drive-by fixes that deficiency by dropping the timers at the
very end of processing the batch, i.e., after the `pgb.flush()` call.
I was **unable to maintain the behavior that we deduct
time-spent-in-throttle from various latency metrics.
The reason is that we're using a *single* counter in `RequestContext` to
track micros spent in throttle.
But there are *N* metrics timers in the batch, one per request.
As a consequence, the practice of consuming the counter in the drop
handler of each timer no longer works because all but the first timer
will encounter error `close() called on closed state`.
A failed attempt to maintain the current behavior can be found in
https://github.com/neondatabase/neon/pull/9951.
So, this PR remvoes the deduction behavior from all metrics.
I started a discussion on Slack about it the implications this has for
our internal SLO calculation:
https://neondb.slack.com/archives/C033RQ5SPDH/p1732910861704029
# Refs
- fixes https://github.com/neondatabase/neon/issues/9925
- sub-issue https://github.com/neondatabase/neon/issues/9377
- epic: https://github.com/neondatabase/neon/issues/9376
Before this PR, the storcon_cli didn't have a way to show the
tenant-wide information of the TenantDescribeResponse.
Sadly, the `Serialize` impl for the tenant config doesn't skip on
`None`, so, the output becomes a bit bloated.
Maybe we can use `skip_serializing_if(Option::is_none)` in the future.
=> https://github.com/neondatabase/neon/issues/9983
## Problem
I was touching `test_storage_controller_node_deletion` because for AZ
scheduling work I was adding a change to the storage controller (kick
secondaries during optimisation) that made a FIXME in this test defunct.
While looking at it I also realized that we can easily fix the way node
deletion currently doesn't use a proper ScheduleContext, using the
iterator type recently added for that purpose.
## Summary of changes
- A testing-only behavior in storage controller where if a secondary
location isn't yet ready during optimisation, it will be actively
polled.
- Remove workaround in `test_storage_controller_node_deletion` that
previously was needed because optimisation would get stuck on cold
secondaries.
- Update node deletion code to use a `TenantShardContextIterator` and
thereby a proper ScheduleContext
## Problem
After enabling LFC in tests and lowering `shared_buffers` we started
having more problems with `test_pg_regress`.
## Summary of changes
Set `shared_buffers` to 1MB to both exercise getPage requests/LFC, and
still have enough room for Postgres to operate. Everything smaller might
be not enough for Postgres under load, and can cause errors like 'no
unpinned buffers available'.
See Konstantin's comment [1] as well.
Fixes#9956
[1]:
https://github.com/neondatabase/neon/issues/9956#issuecomment-2511608097
On reconfigure, we no longer passed a port for the extension server
which caused us to not write out the neon.extension_server_port line.
Thus, Postgres thought we were setting the port to the default value of
0. PGC_POSTMASTER GUCs cannot be set at runtime, which causes the
following log messages:
> LOG: parameter "neon.extension_server_port" cannot be changed without
restarting the server
> LOG: configuration file
"/var/db/postgres/compute/pgdata/postgresql.conf" contains errors;
unaffected changes were applied
Fixes: https://github.com/neondatabase/neon/issues/9945
Signed-off-by: Tristan Partin <tristan@neon.tech>
The spec was written for the buggy protocol which we had before the one
more similar to Raft was implemented. Update the spec with what we
currently have.
ref https://github.com/neondatabase/neon/issues/8699
## Problem
The credentials providers tries to connect to AWS STS even when we use
plain Redis connections.
## Summary of changes
* Construct the CredentialsProvider only when needed ("irsa").
## Problem
`if: ${{ github.event.schedule }}` gets skipped if a previous step has
failed, but we want to run the step for both `success` and `failure`
## Summary of changes
- Add `!cancelled()` to notification step if-condition, to skip only
cancelled jobs
Fixes https://github.com/neondatabase/cloud/issues/20973.
This refactors `connect_raw` in order to return direct access to the
delayed notices.
I cannot find a way to test this with psycopg2 unfortunately, although
testing it with psql does return the expected results.
## Problem
We can't easily tell how far the state of shards is from their AZ
preferences. This can be a cause of performance issues, so it's
important for diagnosability that we can tell easily if there are
significant numbers of shards that aren't running in their preferred AZ.
Related: https://github.com/neondatabase/cloud/issues/15413
## Summary of changes
- In reconcile_all, count shards that are scheduled into the wrong AZ
(if they have a preference), and publish it as a prometheus gauge.
- Also calculate a statistic for how many shards wanted to reconcile but
couldn't.
This is clearly a lazy calculation: reconcile all only runs
periodically. But that's okay: shards in the wrong AZ is something that
only matters if it stays that way for some period of time.
Improves `wait_until` by:
* Use `timeout` instead of `iterations`. This allows changing the
timeout/interval parameters independently.
* Make `timeout` and `interval` optional (default 20s and 0.5s). Most
callers don't care.
* Only output status every 1s by default, and add optional
`status_interval` parameter.
* Remove `show_intermediate_error`, this was always emitted anyway.
Most callers have been updated to use the defaults, except where they
had good reason otherwise.
## Problem
We saw unexpected container terminations when running in k8s with with
small CPU resource requests.
The /status and /ready handlers called `maybe_forward`, which always
takes the lock on Service::inner.
If there is a lot of writer lock contention, and the container is
starved of CPU, this increases the likelihood that we will get killed by
the kubelet.
It isn't certain that this was a cause of issues, but it is a potential
source that we can eliminate.
## Summary of changes
- Revise logic to return immediately if the URL is in the non-forwarded
list, rather than calling maybe_forward
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1732110190129479
We observe the following error in the logs
```
[XX000] ERROR: [NEON_SMGR] [shard 3] Incorrect prefetch read: status=1 response=0x7fafef335138 my=128 receive=128
```
most likely caused by changing `neon.readahead_buffer_size`
## Summary of changes
1. Copy shard state
2. Do not use prefetch_set_unused in readahead_buffer_resize
3. Change prefetch buffer overflow criteria
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Current compute images for Postgres 14-16 don't build on Debian 12
because of issues with extensions.
This PR fixes that, but for the current setup, it is mostly a no-op
change.
## Summary of changes
- Use `/bin/bash -euo pipefail` as SHELL to fail earlier
- Fix `plv8` build: backport a trivial patch for v8
- Fix `postgis` build: depend `sfgal` version on Debian version instead
of Postgres version
Tested in: https://github.com/neondatabase/neon/pull/9849
#8564
## Problem
The main and backup consumption metric pushes are completely
independent,
resulting in different event time windows and different idempotency
keys.
## Summary of changes
* Merge the push tasks, but keep chunks the same size.
# Problem
The timeout-based batching adds latency to unbatchable workloads.
We can choose a short batching timeout (e.g. 10us) but that requires
high-resolution timers, which tokio doesn't have.
I thoroughly explored options to use OS timers (see
[this](https://github.com/neondatabase/neon/pull/9822) abandoned PR).
In short, it's not an attractive option because any timer implementation
adds non-trivial overheads.
# Solution
The insight is that, in the steady state of a batchable workload, the
time we spend in `get_vectored` will be hundreds of microseconds anyway.
If we prepare the next batch concurrently to `get_vectored`, we will
have a sizeable batch ready once `get_vectored` of the current batch is
done and do not need an explicit timeout.
This can be reasonably described as **pipelining of the protocol
handler**.
# Implementation
We model the sub-protocol handler for pagestream requests
(`handle_pagrequests`) as two futures that form a pipeline:
2. Batching: read requests from the connection and fill the current
batch
3. Execution: `take` the current batch, execute it using `get_vectored`,
and send the response.
The Reading and Batching stage are connected through a new type of
channel called `spsc_fold`.
See the long comment in the `handle_pagerequests_pipelined` for details.
# Changes
- Refactor `handle_pagerequests`
- separate functions for
- reading one protocol message; produces a `BatchedFeMessage` with just
one page request in it
- batching; tried to merge an incoming `BatchedFeMessage` into an
existing `BatchedFeMessage`; returns `None` on success and returns back
the incoming message in case merging isn't possible
- execution of a batched message
- unify the timeline handle acquisition & request span construction; it
now happen in the function that reads the protocol message
- Implement serial and pipelined model
- serial: what we had before any of the batching changes
- read one protocol message
- execute protocol messages
- pipelined: the design described above
- optionality for execution of the pipeline: either via concurrent
futures vs tokio tasks
- Pageserver config
- remove batching timeout field
- add ability to configure pipelining mode
- add ability to limit max batch size for pipelined configurations
(required for the rollout, cf
https://github.com/neondatabase/cloud/issues/20620 )
- ability to configure execution mode
- Tests
- remove `batch_timeout` parametrization
- rename `test_getpage_merge_smoke` to `test_throughput`
- add parametrization to test different max batch sizes and execution
moes
- rename `test_timer_precision` to `test_latency`
- rename the test case file to `test_page_service_batching.py`
- better descriptions of what the tests actually do
## On the holding The `TimelineHandle` in the pending batch
While batching, we hold the `TimelineHandle` in the pending batch.
Therefore, the timeline will not finish shutting down while we're
batching.
This is not a problem in practice because the concurrently ongoing
`get_vectored` call will fail quickly with an error indicating that the
timeline is shutting down.
This results in the Execution stage returning a `QueryError::Shutdown`,
which causes the pipeline / entire page service connection to shut down.
This drops all references to the
`Arc<Mutex<Option<Box<BatchedFeMessage>>>>` object, thereby dropping the
contained `TimelineHandle`s.
- => fixes https://github.com/neondatabase/neon/issues/9850
# Performance
Local run of the benchmarks, results in [this empty
commit](https://github.com/neondatabase/neon/pull/9851/commits/1cf5b1463f69ba5066cbb0713912aec7bb5579ad)
in the PR branch.
Key take-aways:
* `concurrent-futures` and `tasks` deliver identical `batching_factor`
* tail latency impact unknown, cf
https://github.com/neondatabase/neon/issues/9837
* `concurrent-futures` has higher throughput than `tasks` in all
workloads (=lower `time` metric)
* In unbatchable workloads, `concurrent-futures` has 5% higher
`CPU-per-throughput` than that of `tasks`, and 15% higher than that of
`serial`.
* In batchable-32 workload, `concurrent-futures` has 8% lower
`CPU-per-throughput` than that of `tasks` (comparison to tput of
`serial` is irrelevant)
* in unbatchable workloads, mean and tail latencies of
`concurrent-futures` is practically identical to `serial`, whereas
`tasks` adds 20-30us of overhead
Overall, `concurrent-futures` seems like a slightly more attractive
choice.
# Rollout
This change is disabled-by-default.
Rollout plan:
- https://github.com/neondatabase/cloud/issues/20620
# Refs
- epic: https://github.com/neondatabase/neon/issues/9376
- this sub-task: https://github.com/neondatabase/neon/issues/9377
- the abandoned attempt to improve batching timeout resolution:
https://github.com/neondatabase/neon/pull/9820
- closes https://github.com/neondatabase/neon/issues/9850
- fixes https://github.com/neondatabase/neon/issues/9835
## Problem
It appears that the Azure storage API tends to hang TCP connections more
than S3 does.
Currently we use a 2 minute timeout for all downloads. This is large
because sometimes the objects we download are large. However, waiting 2
minutes when doing something like downloading a manifest on tenant
attach is problematic, because when someone is doing a "create tenant,
create timeline" workflow, that 2 minutes is long enough for them
reasonably to give up creating that timeline.
Rather than propagate oversized timeouts further up the stack, we should
use a different timeout for objects that we expect to be small.
Closes: https://github.com/neondatabase/neon/issues/9836
## Summary of changes
- Add a `small_timeout` configuration attribute to remote storage,
defaulting to 30 seconds (still a very generous period to do something
like download an index)
- Add a DownloadKind parameter to DownloadOpts, so that callers can
indicate whether they expect the object to be small or large.
- In the azure client, use small timeout for HEAD requests, and for GET
requests if DownloadKind::Small is used.
- Use DownloadKind::Small for manifests, indices, and heatmap downloads.
This PR intentionally does not make the equivalent change to the S3
client, to reduce blast radius in case this has unexpected consequences
(we could accomplish the same thing by editing lots of configs, but just
skipping the code is simpler for right now)
## Problem
It was not always possible to judge what exactly some `cloud_admin`
connections were doing because we didn't consistently set
`application_name` everywhere.
## Summary of changes
Unify the way we connect to Postgres:
1. Switch to building configs everywhere
2. Always set `application_name` and make naming consistent
Follow-up for #9919
Part of neondatabase/cloud#20948
## Problem
To add Safekeeper heap profiling in #9778, we need to switch to an
allocator that supports it. Pageserver and proxy already use jemalloc.
Touches #9534.
## Summary of changes
Use jemalloc in Safekeeper.
## Problem
When picking locations for a shard, we should use a ScheduleContext that
includes all the other shards in the tenant, so that we apply proper
anti-affinity between shards. If we don't do this, then it can lead to
unstable scheduling, where we place a shard somewhere that the optimizer
will then immediately move it away from.
We didn't always do this, because it was a bit awkward to accumulate the
context for a tenant rather than just walking tenants.
This was a TODO in `handle_node_availability_transition`:
```
// TODO: populate a ScheduleContext including all shards in the same tenant_id (only matters
// for tenants without secondary locations: if they have a secondary location, then this
// schedule() call is just promoting an existing secondary)
```
This is a precursor to https://github.com/neondatabase/neon/issues/8264,
where the current imperfect scheduling during node evacuation hampers
testing.
## Summary of changes
- Add an iterator type that yields each shard along with a
schedulecontext that includes all the other shards from the same tenant
- Use the iterator to replace hand-crafted logic in optimize_all_plan
(functionally identical)
- Use the iterator in `handle_node_availability_transition` to apply
proper anti-affinity during node evacuation.
Our rust-postgres fork is getting messy. Mostly because proxy wants more
control over the raw protocol than tokio-postgres provides. As such,
it's diverging more and more. Storage and compute also make use of
rust-postgres, but in more normal usage, thus they don't need our crazy
changes.
Idea:
* proxy maintains their subset
* other teams use a minimal patch set against upstream rust-postgres
Reviewing this code will be difficult. To implement it, I
1. Copied tokio-postgres, postgres-protocol and postgres-types from
https://github.com/neondatabase/rust-postgres/tree/00940fcdb57a8e99e805297b75839e7c4c7b1796
2. Updated their package names with the `2` suffix to make them compile
in the workspace.
3. Updated proxy to use those packages
4. Copied in the code from tokio-postgres-rustls 0.13 (with some patches
applied https://github.com/jbg/tokio-postgres-rustls/pull/32https://github.com/jbg/tokio-postgres-rustls/pull/33)
5. Removed as much dead code as I could find in the vendored libraries
6. Updated the tokio-postgres-rustls code to use our existing channel
binding implementation
Adds a benchmark for logical message WAL ingestion throughput
end-to-end. Logical messages are essentially noops, and thus ignored by
the Pageserver.
Example results from my MacBook, with fsync enabled:
```
postgres_ingest: 14.445 s
safekeeper_ingest: 29.948 s
pageserver_ingest: 30.013 s
pageserver_recover_ingest: 8.633 s
wal_written: 10,340 MB
message_count: 1310720 messages
postgres_throughput: 715 MB/s
safekeeper_throughput: 345 MB/s
pageserver_throughput: 344 MB/s
pageserver_recover_throughput: 1197 MB/s
```
See
https://github.com/neondatabase/neon/issues/9642#issuecomment-2475995205
for running analysis.
Touches #9642.
## Problem
We used `set_path()` to replace the database name in the connection
string. It automatically does url-safe encoding if the path is not
already encoded, but it does it as per the URL standard, which assumes
that tabs can be safely removed from the path without changing the
meaning of the URL. See, e.g.,
https://url.spec.whatwg.org/#concept-basic-url-parser. It also breaks
for DBs with properly %-encoded names, like with `%20`, as they are kept
intact, but actually should be escaped.
Yet, this is not true for Postgres, where it's completely valid to have
trailing tabs in the database name.
I think this is the PR that caused this regression
https://github.com/neondatabase/neon/pull/9717, as it switched from
`postgres::config::Config` back to `set_path()`.
This was fixed a while ago already [1], btw, I just haven't added a test
to catch this regression back then :(
## Summary of changes
This commit changes the code back to use
`postgres/tokio_postgres::Config` everywhere.
While on it, also do some changes around, as I had to touch this code:
1. Bump some logging from `debug` to `info` in the spec apply path. We
do not use `debug` in prod, and it was tricky to understand what was
going on with this bug in prod.
2. Refactor configuration concurrency calculation code so it was
reusable. Yet, still keep `1` in the case of reconfiguration. The
database can be actively used at this moment, so we cannot guarantee
that there will be enough spare connection slots, and the underlying
code won't handle connection errors properly.
3. Simplify the installed extensions code. It was spawning a blocking
task inside async function, which doesn't make much sense. Instead, just
have a main sync function and call it with `spawn_blocking` in the API
code -- the only place we need it to be async.
4. Add regression python test to cover this and related problems in the
future. Also, add more extensive testing of schema dump and DBs and
roles listing API.
[1]:
https://github.com/neondatabase/neon/commit/4d1e48f3b9a4b7064787513fd2c455f0001f6e18
[2]:
https://www.postgresql.org/message-id/flat/20151023003445.931.91267%40wrigleys.postgresql.orgResolvesneondatabase/cloud#20869
## Problem
Currently, we rerun only known flaky tests. This approach was chosen to
reduce the number of tests that go unnoticed (by forcing people to take
a look at failed tests and rerun the job manually), but it has some
drawbacks:
- In PRs, people tend to push new changes without checking failed tests
(that's ok)
- In the main, tests are just restarted without checking
(understandable)
- Parametrised tests become flaky one by one, i.e. if `test[1]` is flaky
`, test[2]` is not marked as flaky automatically (which may or may not
be the case).
I suggest rerunning all failed tests to increase the stability of GitHub
jobs and using the Grafana Dashboard with flaky tests for deeper
analysis.
## Summary of changes
- Rerun all failed tests twice at max
## Problem
For the interpreted proto the pageserver is not returning the correct
LSN
in replies to keep alive requests. This is because the interpreted
protocol arm
was not updating `last_rec_lsn`.
## Summary of changes
* Return correct LSN in keep-alive responses
* Fix shard field in wal sender traces
We keep the practice of keeping the compiler up to date, pointing to the
latest release. This is done by many other projects in the Rust
ecosystem as well.
[Release notes](https://releases.rs/docs/1.83.0/).
Also update `cargo-hakari`, `cargo-deny`, `cargo-hack` and
`cargo-nextest` to their latest versions.
Prior update was in #9445.
## Problem
We currently see elevated levels of errors for GetBlob requests. This is
because 404 and 304 are counted as errors for metric reporting.
## Summary of Changes
Bring the implementation in line with the S3 client and treat 404 and
304 responses as ok for metric purposes.
Related: https://github.com/neondatabase/cloud/issues/20666
## Problem
For cancellation, a connection is open during all the cancel checks.
## Summary of changes
Spawn cancellation checks in the background, and close connection
immediately.
Use task_tracker for cancellation checks.
## Problem
possible for the database connections to not close in time.
## Summary of changes
force the closing of connections if the client has hung up
"rel_size_v2_enabled":False,# test suite enables it by default as of https://github.com/neondatabase/neon/issues/11081, so, custom config means disabling it
# Rollback phase should be fast: this is one WAL record that we should process efficiently
fut=exec.submit(rollback_and_wait)
fut.result(timeout=15ifreldir_type=="v1"else30)
fut.result(timeout=15)
except:
exec.shutdown(wait=False,cancel_futures=True)
raise
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
github-actions[bot]
Conrad Ludgate
JC Grünhage
Ivan Efremov
Folke Behrens
Conrad Ludgate
Yuchen Liang
John Spray
a-masterov
Erik Grinaker
Alexey Kondratov
Peter Bendel
Vlad Lazar
Christian Schwarz
Alexander Bayandin
Arpad Müller
Alexey Immoreev
Tristan Partin
Arseny Sher
Anastasia Lubennikova
Konstantin Knizhnik
Matthias van de Meent
Gleb Novikov
Anna Khanova