Switching back to it no longer rebuilds the composer and refetches the agent, models and commands; the branch and the agent probe are still read again each time it shows.
A delegated Maven launch runs the module and its reactor siblings from a
snapshot of their target/classes. The Maven launch classpath merged in since
#2929 lists those target/classes too, so both copies were on the classpath and
every resource was found twice: MyBatis loads each mapper XML twice and stops
with "XML fragments parsed from previous mappers already contains value".
Entries that have a snapshot are now left out of the merged Maven classpath.
Fixes#3719
- Toolbar pickers (row limit, Tx mode, data source, schema, extractor, page size) render as ghost dropdowns.
- Result toolbar: Submit and Revert are icon buttons; the data source label is gone.
- The pager shows only "N rows" (with the page size picker) when the result fits on one page.
- Column header names use the regular weight.
- New Task page: a narrower box with room for a few lines, a lighter heading, and the
project, checkout and branch as one quiet line under the box. The agent shows as its
icon (name and version in its tooltip); the probe line shows only when the agent fails.
- Composer: one + menu for referencing a file, attaching an image and MCP servers; the
MCP popover opens from it or /mcp. The current-file chip turns IDE context on and off.
- Model and effort: the model button opens one searchable list of model names (pin on
hover, context size above it); effort is its own picker beside the model.
- Session: the status line moves under the box as one line — branch and worktree on the
left, changes, context use, time and terminal on the right; "Ready" is no longer shown.
cancellable checked the dialog's signal before lspRequest's editor sync; cancellable now hands its sender a wanted check, which lspRequest applies after syncing (and applyEdit does the same).
Only folders below an entry's own folder were checked for links. Every folder an entry goes into is now checked, from the output folder (excluded) down to the entry's own folder.
The progress row under a tool's details passed the tool's display name to
cancelInstall, which looks the install up by tool name. For every tool whose
display name differs (Eclipse JDT Language Server for jdtls, Delve for
delve, ...), Cancel found nothing and the install went on.
Fixes#3721
The commit message inspections were shown as untranslated English text with
no way to act on them, so the subject/body hint read like an error that
blocked line breaks. They now go through the text catalog, and the missing
blank line hint has an Add blank line fix that inserts it and keeps the caret.
Fixes#3732
Session denials came only from explicit per-session false overrides. They now follow each configured server's effective state (workspace entries first), keep switched-off names the IDE doesn't configure, and add the built-in server's agent-facing name OpenIDEA when it is off.
Block keys included the layout, so switching it remounted every block and a collapsed one released its document. Blocks are keyed by file; DiffEditor follows the layout the host asks for in place.
The window close path saved without checking that untitled buffers were saved, and WSL open in place asked the leave guard as if untitled buffers stayed with the window. The close path now shares the post-save untitled check, and WSL is resolved before the guard.
applyEdit waited for editor sync and then applied regardless of the dialog's signal; cancellable sent its request even when the signal was already aborted. Both now check the signal.
A side conversation's denial of project changes only works in a mode that asks first, but Claude Code's Accept Edits and Codex's Ask were kept, and a refused switch still started the session. Side conversations now take the agent's most careful mode (Codex Read Only, Claude Code default, then plan/ask), don't start when the agent's settings don't end up there, and refuse a mode change that doesn't ask.
The cleanup of recorded files and the copy into a user-chosen artifact output folder followed links, so a folder of the output replaced by a link to the sources made the build delete or overwrite source files. Recorded paths through a link are skipped, a file link in an artifact file's place is replaced, and a folder that links elsewhere stops the layout.
Switching a server off in the session's MCP picker only left it out of the servers passed to the session, so a server Claude Code also loads from its own configuration kept running. The session parameters now name the servers switched off (_meta.openidea.mcpServersOff) and the Claude Code session denies their tools with --disallowedTools mcp__<server>.
The graph walk behind a Python method's super-method icon started from the class name and continued by base names, so same-named classes elsewhere contributed unrelated super methods. It now walks concrete class declarations, resolving each base from the file that names it.
A file added to the index and then deleted from disk is no change against HEAD, so the change lists leave it out; the staging area applied the same rule and listed it nowhere, keeping Commit disabled or silently leaving the staged addition out of the commit. With the staging area on, it is now listed under Staged (added) and Unstaged (deleted) and committed as staged.
Collapsing a block unmounted its diff editor and released the working-tree document, which with autosave off drops its unsaved edits. A loaded block now keeps its diff while collapsed, hidden.
An editor hint is the tooltip element itself, so the editor theme's .cm-tooltip max-width (same specificity, loaded later) replaced its 480 px limit and long messages ran past the window edge; the limit now applies to .cm-tooltip.cm-lsp-hint. The balloon stack keeps 16 px from the left as well and balloons narrow to fit, so they are no longer cut off in a narrow window.
The unsaved-changes guard left untitled buffers out because they follow the window into another project opened in place, but it also ran for Close Project, Disconnect from Remote Host, closing to Welcome and opening a remote project in place, where they don't follow, so they were dropped without a question. The guard now knows where the window goes; only another local project in place leaves them alone, otherwise they count, Save asks for their paths and a cancelled Save As keeps the project open.
Closing Change Signature or Extract Interface while it was checking for conflicts left the check running, and its edit was applied (or its Problems Detected asked) after the dialog was gone; closing now cancels the request in flight and nothing is confirmed, previewed or applied afterwards. The identifier check was ASCII-only and rejected valid Java names in other scripts; it now follows Java's identifier rules.
The tool prepared the request to show its resolved URL in the confirmation, then prepared it again to send it, re-reading the environment files: changed in the meantime, they could send the private-environment headers to a destination the user never approved. ide_http::send now sends a prepared request as is, and the tool sends exactly the one it showed.
A side conversation's task config was moved to a mode that asks, but its session replayed the source task's choices unchanged, so one started from a Full Access / bypass-permissions task ran in that mode and wrote without asking. The replayed choices now drop values that approve everything and turn such a mode (including the agent's own starting mode) to one that asks; setting such a value in a side conversation is refused.
Artifact layout deleted the whole output folder before copying, so an output folder set to the project folder (or one shared with other output) lost everything in it. A user-chosen folder is no longer cleared: the layout records the files it wrote (with the folder they were for) in the build cache and later removes only recorded files it no longer produces. The IDE's own staging folder is still laid out afresh.
With Highlight hyperlinks on, terminal URLs only got their underline from xterm's link provider while hovered, so they looked like plain text. Visible URLs now get xterm decorations in the theme's link colour with an underline (viewport-only scan coalesced per frame, rebuilt on theme or setting changes, off in the alternate buffer), in the main and embedded terminals. Link hit ranges were computed from string offsets, so wide CJK characters before a link shifted its hover and click area; both now use cell columns.
Co-authored-by: wildcatDownstairs <26499420+wildcatDownstairs@users.noreply.github.com>
Codex keeps its own project trust decision, so a project trusted in the IDE could still have its project-local .codex configuration (MCP servers, hooks, exec policies) disabled, and the Codex adapter dropped Codex's configWarning and warning notifications. Those warnings now reach the task, including ones sent before a session exists. When Codex reports the current project's .codex layer disabled, starting, resuming or forking a session first asks Trust Project in Codex / Keep Untrusted; only an explicit confirmation writes that project's trust entry through Codex's config API (with the user layer's version), Full Access doesn't bypass the question and side chats deny it.
Co-authored-by: YannABC <9603157+YannABC@users.noreply.github.com>
Attached document views (the editable side of a diff, file previews) synchronized the buffer but never saved on blur, so an edit in a diff stayed unsaved on disk (e.g. removing an added final newline left Git reporting the file modified while the diff showed identical content). Attached views now autosave on blur with files.autoSave, sharing the regular editor's popup-aware delay (saveOnBlur), skip read-only views and cancel a pending save when destroyed or released.
Co-authored-by: qiany-sui <47996497+qiany-sui@users.noreply.github.com>
The Claude CLI's initialize response carries resolvedModel for the default entry, but Settings::from_cli kept only its display name, so the model picker and the composer chip showed "Default (recommended)" without the model that runs. The default entry is now named "Default (<resolved model>)"; without a resolved model it keeps the agent's own name.
Co-authored-by: panda-student <71381346+panda-student@users.noreply.github.com>
Line-start gutter icons were mapped with the default association, so Enter at the start of their line left them on the new empty line until each source placed them again. They now move with their line's text at once (mapLineStart), and HTTP endpoint markers are mapped through edits instead of cleared. Sibling of #3722.
The merge editor's toolbar and footer buttons ran global actions that only apply to the focused merge editor, so they did nothing while it lacked focus (e.g. right after opening). Each button now runs its command on its own merge editor; Previous/Next Change are disabled once no unresolved change is left.
After an edit each icon source places its icons again on its own schedule (run icons before the language server's inheritance icons, plugin line markers cleared and refilled), so a line's icons briefly part and the shared icon area narrowed and widened again, shifting the code. The area now widens at once but narrows only after the text and the icon count stayed unchanged for 2 seconds, and its width follows the line with the most icons in the whole file.
Co-authored-by: wildcatDownstairs <26499420+wildcatDownstairs@users.noreply.github.com>
Editor tabs tinted by File Colors used the data source tint strength (22%),
so they looked much stronger than the same file in the project view. They now
use --file-tint-strength like the project view, which drops from 14% to 9%,
and a tinted tab still shows the hover background on hover.
After Codex moved from codex-acp to the native app-server driver, the composer kept the dynamic skills but lost the 11 builtin commands the adapter provided, and typing one sent it to the model as a prompt. The native adapter now owns a typed command table (/plan, /mcp, /skills, /status, /review, /review-branch, /review-commit, /compact, /goal, /rename, /logout), merged with skills/list, and routes each to its app-server operation (thread/compact/start, review/start, thread/goal/*, thread/name/set, config/mcpServer/reload, account/logout) or answers locally; /plan switches the collaboration mode, also offered in the config picker.
Co-authored-by: kradme <17811095+kradme@users.noreply.github.com>
jdtls answers textDocument/implementation for an implementation in a dependency at 0:0 of the decompiled class file (the search match has no source offset), so the gutter and Go to Implementation opened the class instead of the method. java-usages 1.15.0 adds openidea.java.implementationLocations, which finds the overriding method with MethodOverrideTester and returns its decompiled declaration; explicit Go to Implementation refines jdt 0:0 targets, and gutter markers resolve them lazily when opened (lsp_implementation_locations).
Co-authored-by: misswell <28730815+misswell@users.noreply.github.com>
Debug skipped the single-instance check Run has, so each click started one more debug session of the same configuration. Debug now asks "not allowed to run in parallel" and stops the configuration's running and debugged instances first (unless it allows multiple instances); a click while the first Debug is still preparing is ignored. Run also counts the configuration's debug sessions as running instances.
A speed search that matched nothing replaced the focused list with a non-focusable empty state, so focus fell to the page and the chooser stopped taking keys. List now renders its empty state inside the focusable list (all list popups and choosers). Chooser rows whose targets share one name (a method's implementations, same-named declaration candidates) show the containing class as their text, so typing a class name filters them.
Refactor > Extract Interface… (also in Refactor This) opens a dialog for the class of the current Java file: interface name, package and members. jdtls checks the extraction and computes the edit, which creates the interface, makes the class implement it and uses it where possible; the new file opens afterwards.
Move… (F6, Refactor This) in Java now asks for the destination and moves:
a top-level class to another package (package declaration, imports and
references follow), a static member or nested type to another class (or a
nested type to a new file), an instance method to the class of one of its
fields or parameters. jdtls offers these only as client-side commands
(java.action.applyRefactoringCommand), now enabled with
moveRefactoringSupport; the IDE picks the destination from
java/getMoveDestinations or java/searchSymbols, then java/move checks the move
and computes the edit, confirmed in Problems Detected when it warns.
Code actions can register client-side command handlers
(registerClientCommand); jdtls' changeSignature command opens the Change
Signature dialog. New IPC: lsp_java_move_destinations, lsp_java_source_types,
lsp_java_move. SignatureChanged is now ServerRefactored.
Change Signature… (⌘F6, also in Refactor This) on a Java method opens a
dialog for its visibility, return type, name and parameters (add with a
default value for existing calls, remove, reorder), with Delegate via
overloading method and a signature preview. jdtls reads the method
(java/getChangeSignatureInfo) and checks the new signature and computes the
edit for the method, its overrides and its calls (java/getRefactorEdit
changeSignature); warnings are confirmed in Problems Detected before the edit,
and Preview lists the changes first. jdtls offers the refactoring only through
a client-side command, so Java had no Change Signature before.
New IPC: lsp_signature_info, lsp_change_signature.
Go to Declaration (and ⌘-click) on a method symbol in a callback
(before_action :load_user, skip_before_action, helper_method, validate,
if: :admin?) opens its def in the class, or in ApplicationController /
ApplicationRecord. In config/routes.rb, "controller#action" strings open the
action's def and resources / resource symbols open the controller.
Refs #900
Related Symbol… (⌃⌘↑ / Ctrl+Alt+Home, in the Navigate menu and the editor's
Go To submenu) goes to the files tied to the current one by convention: one
target opens directly, several open a Choose Target list, none shows
"No related symbols". Providers register through editor/relatedProviders.
- C, C++, Objective-C and CUDA: a header and its source files of the same
name, the ones in the same folder first.
- Rails: a controller action and its views, a controller and all its views,
helper and model, a view and its controller action, a helper and its
controller and views, a model and its controller and migrations.
Refs #900
Django Template files start djlsp (django-template-lsp, installed into its own
virtualenv on request) next to the HTML language server: completion, hover and
Go to Declaration for the project's template tags, filters, template names,
static files and URL names. The project interpreter's environment is passed as
its env_directories, so a virtualenv, conda or pixi environment outside the
project root is used too.
Refs #2581
MCP servers can be configured at user and project level, imported from pasted JSON, tested with their tool list shown, and discovered from other agent CLIs' config files. Discovery reports only env and header key names, never values, and importing is explicit; external config files are never modified. Testing a server requires a trusted project. Each agent session can turn individual servers on or off from a picker; the overrides are stored with the task and applied when the session opens.
Closes#3608
Co-authored-by: dengliu <5108773+dengliu@users.noreply.github.com>
A commit row closed its card on any capture-phase scroll so that scrolling the log, which moves the anchor, hides it; scrolling a long message inside the card fired the same listener. Scrolls inside the card no longer close it; the log and elsewhere still do.
Co-authored-by: wildcatDownstairs <26499420+wildcatDownstairs@users.noreply.github.com>
The log index took the first non-empty line as a commit's title, while blame and code history use git's subject (%s). It now takes the first paragraph (up to the first blank or whitespace-only line) joined on one line, as git log --oneline does; the persisted summaries table moves to summaries-v3 and the old one is dropped on open.
Closes#3680
Co-authored-by: wildcatDownstairs <26499420+wildcatDownstairs@users.noreply.github.com>