990b0ed5cd
* fix(orchestration): keep pressing Enter until an OpenCode worker's task starts OpenCode 2 draws its input box before it has loaded its agent list from its server, and silently drops an Enter that arrives in that gap. On a loaded machine the gap outlasts the 0.5 s Orca waits after pasting, so a worker's task sat unsent in the box while worker-start reported it ready. OpenCode's turn start is now observed through its status hooks, like Codex and Claude. While no turn has started, the prompt verifier presses Enter again on an interval (per the agent row, opencode and opencode2) for as long as the pane's hooks are reporting, never past an approval or question prompt or a replaced pane, and at most a fixed number of times. A pane whose hooks never report keeps today's single Enter and unobserved receipt. Co-Authored-By: Claude <noreply@anthropic.com> * fix(opencode): give a worker its task only once OpenCode can submit it OpenCode 2 draws its input box, and shows its cursor there, before its agent list has loaded from its server, and it silently drops an Enter that arrives in that gap. Orca pasted a worker's task on the box's cursor and pressed Enter half a second later, so on a loaded machine the task stayed unsent in the box while the worker read as started. OpenCode's paste readiness now also waits for the row under the input box (`<agent> · <model>`), which OpenCode paints only once the agent list exists. The rule keys on the row's separator inside OpenCode's alternate screen, not on names or colours. Both the opencode and opencode2 rows use it, worker start and the renderer's draft paste alike. OpenCode 1 paints the row in the box's own frame, so it is ready on the same read as before. Recorded OpenCode 2.0.21 boots (cold, hidden pane, four at once, attached to a running server) are the evidence; two more show an Enter after the row submitting and one at the box being dropped. The earlier resubmit loop and the settlement-provider changes are removed. Co-Authored-By: Claude <noreply@anthropic.com> * fix(opencode): prove the agent-row signal with natural captures and never paste a draft blind Replaces three recordings made by launching four OpenCode boots at once with natural single-run evidence: one cold start that pasted on the agent row and pressed Enter on Orca's real 500 ms timing (submitted), and one cold start recorded under heavy load from other sessions, where the paste on the box's cursor and Orca's Enter came before the agent row and the brief stayed unsent. Adds a 2.0.14 cold start as a cross-version check. The renderer's draft paste no longer falls back to a blind paste when the OpenCode agent-row signal never arrives: OpenCode would drop the Enter and leave the draft in its box, so the caller gets its timeout notice instead. Other agents keep the fallback. Co-Authored-By: Claude <noreply@anthropic.com> * fix(opencode): type the single-signal predicate against the public signals Co-Authored-By: Claude <noreply@anthropic.com> * fix(opencode): read the agent row by its place on screen and wait for it only before Enter - The agent-row signal now keys on structure: the `·` must sit on the line directly above the input box's bottom-left corner, so a `·` in the footer path or a session tab title no longer counts. Leaving the alternate screen or turning bracketed paste off withdraws what each part established. - Only deliveries that press Enter wait for the row (new `submitPasteReadySignal`); drafts keep the box-cursor rule, as on main. Worker start always submits. - When the box cursor has shown but the row never comes (OpenCode 2 drops the agent below 44 columns), both waiters proceed after a 5 s grace, as main did. A natural 40-column capture proves that start submits. - The renderer's blind-paste fallback is back to main's behaviour. Co-Authored-By: Claude <noreply@anthropic.com> * fix(opencode): take the box at the readiness deadline while the agent-row grace is pending - Both paste waiters resolve ready, not timed out, when the hard deadline lands while the 5 s grace is pending: the box was seen, so this is the verdict the box rule gave before. - Tab-bound draft paste is tested to wait on the agent row only when Enter follows. - Scanner: a separator pairs with its corner only inside one synchronized frame, row 0 clamps to 1, and the grace comment names the transparent-theme case. The draft signal type no longer admits the agent-row signal, whose grace only the paste waiters honour. Co-Authored-By: Claude <noreply@anthropic.com> * fix(opencode): withdraw the agent-row grace when OpenCode leaves the alternate screen If OpenCode exited after drawing its box but before its agent row, the grace still ran out and the task was pasted into the shell. Leaving the alternate screen now clears the box cursor, and once an app has left it a cursor the shell shows outside it no longer starts a grace. A terminal that never forwards the alternate screen still gets one. Co-Authored-By: Claude <noreply@anthropic.com> * test(serialize): register the new OpenCode captures' pre-existing grid-restore counts The six OpenCode 2 captures this PR adds hit the serializer limitations the 1.18.32 and 2.0.18 captures are already registered for: the live pen's background (and once its bold bit) on restored cells, rows kept below the source after a shrink, and the cursor one column short after a shrink. No I1 or I3 failure; the serializer is unchanged. Co-Authored-By: Claude <noreply@anthropic.com> * fix(opencode): bound the readiness deadline's last settle check With a grace pending, the deadline runs one more settle check, and over SSH its foreground read could hold a past-due wait for the channel's 30 s timeout. It now gives up after 2 s. Tests cover a hand-off, a failure and an abort during that check, a refused grace settled at the deadline, the bound, and the grace restarting at a hand-off. Co-Authored-By: Claude <noreply@anthropic.com> --------- Co-authored-by: m4air <m4air@Mac.localdomain> Co-authored-by: Claude <noreply@anthropic.com>
Orca
中文 · 日本語 · 한국어 · Español · Français · Português
The AI Orchestrator for 100x builders.
Run Codex, ClaudeCode, OpenCode or Pi side-by-side — each in its own worktree, tracked in one place.
Download Orca
Features
Mobile CompanionMonitor and steer your agents from your phone — get notified when an agent finishes and send follow-ups from anywhere. |
 |
Parallel WorktreesFan one prompt across five agents, each in its own isolated git worktree — compare the results and merge the winner. |
 |
Terminal SplitsGhostty-class terminals with WebGL rendering, infinite splits, and scrollback that survives restarts. |
 |
Design ModeClick any UI element in a real Chromium window to send its HTML, CSS, and a cropped screenshot straight into your agent's prompt. |
 |
GitHub & Linear, NativeBrowse PRs, issues, and project boards in-app — open a worktree from any task and review without a context switch. |
 |
SSH WorktreesRun agents on a beefy remote box with full file editing, git, and terminals — auto-reconnect and port forwarding included. |
 |
Annotate AI DiffsDrop comments on any diff line and ship them back to the agent — review, edit, and commit without leaving Orca. |
 |
Drag Files to AgentsVS Code's editor with autosave everywhere — drag files or images straight into an agent prompt. |
 |
Orca CLIAgents drive Orca too — script every workflow with |
 |
Also in the box:
- Quick open — Search across worktrees, files, agents, commands, and repo context without leaving your flow.
- Account switcher & usage tracking — See Claude and Codex usage and rate-limit resets, and hot-swap accounts without re-logging in.
- Rich repo previews — Preview Markdown, images, PDFs, and repo docs in the workspace.
- Computer Use — Let agents operate desktop apps and visible UI when a workflow needs real interaction.
- Notifications and unread state — Know when an agent finishes or needs attention, then mark threads unread to come back later.
- And many, many more — we ship daily, so this list is perpetually behind. The changelog is the real feature list.
Supported Agents
Works with any CLI agent — if it runs in a terminal, it runs in Orca.
Claude Code
Codex
Grok
Cursor
GitHub Copilot
Muse
DeepSeek Harness
ZCode
OpenCode
MiMo Code
Amp
OpenClaude
Antigravity
Pi
oh-my-pi
Hermes Agent
Devin
Goose
Auggie
Autohand Code
Charm
Cline
CodeBuddy
Codebuff
Freebuff
Command Code
Continue
Droid
Kilocode
Kimi
Kiro
Mistral Vibe
Qwen Code
Rovo Dev
+ any CLI agent
Install
Desktop — macOS, Windows, Linux
- Download from onOrca.dev
- Or grab a build directly: macOS Apple Silicon · macOS Intel · Windows (.exe) · Linux AppImage · All builds
- Running
orca serveon a headless Linux server? See the headless Linux server guide.
Or via a package manager:
# macOS (Homebrew)
brew install --cask stablyai/orca/orca
# Arch Linux (AUR) — or stably-orca-git to build from source
yay -S stably-orca-bin
Mobile Companion — iOS, Android
Pair with your desktop app to monitor and steer your agents from your phone.
- iOS: Download on the App Store
- Android: Download APK 0.0.52 · Install guide
Community & Support
-
Discord: Join the community on Discord.
-
Twitter / X: Follow @orca_build for updates and announcements.
-
WeChat: Scan to join the Orca community WeChat group 11.
-
Feedback & Ideas: We ship fast. Missing something? Request a new feature.
-
Privacy: See the privacy & telemetry docs for what anonymous usage data Orca collects and how to opt out.
-
Show Support: Star this repo to follow along with our daily ships.
Developing
Want to contribute or run locally? See our CONTRIBUTING.md guide.
The relay that pairs the mobile app with a desktop host is also in this repository under
cloud/, with a separate pnpm workspace and setup guide.
Signed Builds
Windows code signing sponored/provided by SignPath.io, certificate by SignPath Foundation.
License
Orca is free and open source under the MIT License.