mirror of
https://github.com/l0ng-ai/tty7.git
synced 2026-10-03 16:01:59 +00:00
5ba588f6d27c3d282c4fcd2d2a6f1ca72c8315ca
1488
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 l0ng-ai
|
5ba588f6d2 |
fix(mobile): let Settings renew a pairing code, and say when one is spent (#1019)
While a code was on screen the Show code button was disabled, so the only way to a fresh code was Cancel then Show code. Worse, any attempt at a code closes the offer, so after a mistyped paste or a dropped connection the page kept showing a dead code for up to ten minutes with no hint. - The button reads "New code" while a code is up, and replaces it. - A code that can no longer pair stays on screen faded, saying why (expired, tried, or replaced by a newer offer), with New code beside it. - The validity note counts down instead of saying "10 minutes". - Cancel, and switching phone access off, now withdraw the offer on disk; before, a dismissed code could still pair until it expired. Only our own offer is withdrawn, never one opened elsewhere since. The gateway's pair_code now returns the offer's secret alongside the code, and State gains pairing_is_open / has_open_pairing / close_pairing. Claude-Session: https://claude.ai/code/session_01BDVpJ78s7RQVcj57vjTcfA |
||
|
l0ng-ai
|
9f44feed29 |
fix(scm): don't hand a new history page the previous page's rows (#1020)
The graph's row cache keyed on the page's address. Once the old page was freed, the next one could land in the same allocation, match the key, and be served the old, longer index list - so rendering indexed past the end of the new page's commits and panicked (seen as 'index out of bounds: the len is 1 but the index is 1'). Key the cache on a Weak to the page instead: while the cache holds it, the allocation can't be reused, so ptr_eq only matches the same page. |
||
|
l0ng-ai
|
e7097bef16 |
docs: add a privacy policy for the mobile app
Claude-Session: https://claude.ai/code/session_01BDVpJ78s7RQVcj57vjTcfA |
||
|
l0ng-ai
|
d1b96e1346 |
feat(panel): show the author on a hovered GitHub row (#1018)
The author was already fetched for every issue and pull request but only the detail view showed it. A hovered row now shows it between the labels and the age. In a narrow panel the author is what gives: it is capped, then truncated down to nothing, while the labels and the age keep their width and the title keeps a stub, so the meta no longer pushes past the row's edge. |
||
|
l0ng-ai
|
5542fd5e12 |
docs(issues): say the bug template's log needs TTY7_LOG (#1017)
tty7.log is only written when TTY7_LOG is set, so reporters following the template find no file (#1010). Say how to turn it on, and ask for crash.log, which is always written. Claude-Session: https://claude.ai/code/session_01JRqYZ9E153WpSHGS2AW3BM |
||
|
l0ng-ai
|
8e9f55173b |
fix(agents): fork agent sessions in remote workspaces (#1016)
Forking from a pane in a remote workspace always failed with "the pane is still connecting": a remote workspace's new pane is dialled asynchronously, and the fork path demanded a ready terminal to type into. It now hands the fork line to `run_when_ready`, the same land-then-run path quick launch uses. The new pane also opens in the source's directory on its own host (`spawnable_cwd`) rather than only a local one. Agents key their history by directory, so a fork started in the remote home would find nothing to branch. Panes that have ssh'd or entered WSL themselves stay excluded (tty7 holds no link to that machine), and the notification now says exactly that instead of "local panes only". |
||
|
l0ng-ai
|
230a023ebf |
fix(terminal): stop the git retry check from redrawing every poll tick (#1015)
The retry added in #1011 went through update_global on every 300ms poll while a pane's repo was unanswered, even when the probe was still in flight or throttled and nothing was claimed. Each mutable touch of the GitStatusCache global wakes its observers, so the window redrew about three times a second for as long as a probe was pending or failing. That is what a_commit_detail_reads_its_own_files_and_draws_them caught on Linux CI (2 idle frames where 0 are expected). Ask whether a retry is due read-only (GitStatusCache::probe_due) and only touch the global when one is. |
||
|
l0ng-ai
|
8c75722466 |
fix(sidebar): elide branch names from the end only (#1014)
The sidebar branch (group header and row git line) was front-elided, but its width budget was a few pixels short: the line paints with tabular figures while it was measured with proportional ones, and the separator was measured as " · " though it is drawn as a bare "·" between two gaps. The front-elided branch then overflowed and CSS truncation cut its tail too, leaving "…nd-error-classificati…". - Measure the git line and header with the same tabular font they paint with, and measure the separator as drawn. - Elide the branch from the end, the plain cut a reader expects; the CSS backstop now cuts in the same direction. |
||
|
l0ng-ai
|
3f9ae33a28 |
style(ui): lighter, tint-keeping selection and hover on the side panels
The tab rail's current row read as a dark slab. Both side panels (the tab rail and the docked right panel) now step on their own lighter rungs, 1.07:1 for hover and 1.12:1 for selected, and step toward the panel's own shade instead of the foreground, so a warm panel keeps its tint rather than turning into a grey patch. On the default light theme that lands on #ededec / #e8e8e7. The settings page's nav sits on the same rail fill, so it now paints with the rail's rungs instead of its own alpha tokens. |
||
 l0ng-aiandClaude
|
24cf458e3b |
feat(mobile): a phone app to watch and drive tty7 panes (#983)
* feat(mobile): a gateway that lets a paired phone reach this machine over iroh
The first half of the mobile app: everything on the desktop side, plus the
client library the app will link.
- tty7-mobile-proto: the phone<->gateway wire protocol. One stream per purpose
(pair, control, pane), framed like the daemon's frames, with raw terminal
bytes kept out of JSON. No tty7-core, so it cross-compiles for iOS/Android.
- tty7-gateway: dials nothing, accepts phones over iroh (hole punching, relay
fallback, end-to-end encrypted), checks the peer's key against the paired
device list, and bridges to the daemon. Panes are observed, not attached,
and keystrokes go in through SendInput, so a phone never resizes a pane or
takes it away from the desktop window. `pair` prints a one-time QR code.
- tty7-mobile-client: the phone side (pair, tree, pane streams, direct/relay
and RTT for the link), plus a `probe` example that stands in for a phone.
Verified against a real, isolated daemon: pair, tree, and typing into a pane
over a direct path, ~0.8 ms median echo on loopback.
* feat(mobile): the Tauri app — pair, browse the machine, drive a pane
The phone half, as a Tauri 2 app in mobile/ (its own cargo workspace, so the
desktop build and CI never compile a WebView stack).
- Rust side: the phone's iroh endpoint and key, paired machines, and every
live stream, behind eight commands. Terminal output crosses to the WebView
as raw ArrayBuffers on a Tauri channel, batched per frame, in order with the
pane's JSON events.
- Frontend: vanilla TS + xterm.js. Paired machines and pairing; one machine's
workspaces, tabs and panes with agents that need you pinned on top and the
link's direct/relay path and RTT in the header; a terminal that fits the
desktop pane's width, with an esc/tab/ctrl/arrows key bar. Coming back from
the background re-watches and re-opens, relying on the daemon's replay.
Verified as a macOS build against a live gateway and an isolated daemon:
paired from the app, tree rendered on a direct path, keystrokes and key-bar
arrows reached the pane. iOS/Android builds need Xcode / the Android NDK,
neither of which is on this machine; mobile/README.md has the steps.
* fix(gateway): one serve per machine, and say how to start a missing server
- `serve` takes an exclusive lock on <config dir>/mobile/serve.lock. A second
gateway on the same key is a second endpoint answering to one address, so a
phone reached whichever the network picked. It is now refused, naming the
pid that holds the lock.
- With no tty7 server running, phones and the terminal both hear "tty7 isn't
running on <host> — open tty7 there, or run `tty7 server start`" instead of
"lost the tty7 server: No such file or directory". `serve` checks once at
startup, and still starts, since tty7 may be opened after it.
* feat(mobile): redesign the app as a native-feeling, minimal UI
The first cut read as a web page of bordered boxes. This rebuilds it the way a
phone app moves and reads, in the desktop tty7's own look:
- Screens push and pop with View Transitions; large titles fold into the bar.
- Grouped inset lists on a tinted canvas, following the system Light/Dark with
the desktop presets, accent and ANSI palettes. Hack for code and terminal.
- Panes are listed by tab, one card per workspace, with the desktop's agent
avatars and status badges (Waiting hollow, Working blinking) and its words.
- Pairing is its own screen, with steps, a Paste button and inline errors.
- A machine that stays silent for 10 s says so and offers to pair again; an
offline notice says what to check.
- The terminal header shows live/offline in words. A pane too wide to read is
shown at a readable size and pans to follow the cursor, with a toggle to fit
the whole width. The key bar has drawn icons, puts left/right first, and
has a keyboard toggle.
PRODUCT.md and DESIGN.md record the product facts and the design system.
* feat(mobile): open a new tab from the phone
Each workspace on a machine's screen gets a "New tab" action. It starts a
shell at the end of that workspace, in the directory its last tab is in, and
opens it straight away.
- Protocol: a one-shot `Open::NewTab { workspace_id, cwd, size }` stream,
answered with `Ok` and a `TabCreated { tab_id, pane_id }`, or `Denied`.
It is additive, so the protocol version stays. A gateway from before this
drops the stream unanswered, and the app says to update it.
- Gateway: takes the same two steps as `tty7 tab new`, spawning a shell owned
by the workspace and then TabCreate. The shell starts at the grid the phone
asked for, because no desktop window is showing it yet. Sizes are clamped.
- App: a `tab_new` command, with the size worked out from the screen at the
readable font size.
- probe: `newtab <workspace-id> [cwd]`.
* feat(mobile): reach the machines the desktop is linked to over SSH
A machine's screen now lists, under its own workspaces, every machine its
tty7 holds an SSH link to, with that machine's workspaces. Panes there open,
take input and get new tabs like local ones. "Needs you" gathers panes from
all of them.
- The gateway routes through the local server over links it already holds,
the same way `tty7 -m <machine>` does. It never dials a down link, because
that would guess at credentials the phone does not have. A down link
shows as "Link down", with a note to reconnect it on the desktop.
- Protocol, additive: `Tree.remotes`, and an optional `machine` (the link
key) on `Open::Pane` and `Open::NewTab`. A local pane is asked for exactly
as before, so older gateways still understand it.
- Rebuilding a route target from a link key moves from the CLI into
tty7-core as `RouteInfo::target` / `RouteInfo::host`, so the CLI and the
gateway share one rule. The CLI now calls it.
* perf(gateway): read linked machines in parallel, never waiting on a slow one
Linked machines were read one after another on every tree poll. One slow
SSH link, whose requests can take 10 s, stalled the whole tree for every
phone, local workspaces included. It also held a lock that queued pane
opens, input and new tabs on every other link.
- Each linked machine is read on its own thread (`poller::Poller`). A poll
waits at most 250 ms. A machine that has not answered is reported as it
last was, and its read lands for the next poll. Only one read is in flight
per machine, however many phones are watching. A machine that drops off and
comes back cannot receive a stale read, because each slot has a generation.
- Routed control connections are locked per machine, not all together.
- A link that is up but has not answered its first read is sent as
`RemoteView.pending` (additive). The app shows "Reading…" with skeleton
rows instead of claiming the machine has no workspaces.
* fix(mobile): keep reaching the computer after the gateway restarts
Every `serve` bound a random port, so a restart left each phone holding
addresses that no longer answered. Where the n0 relays are unreachable, which
is common behind the Great Firewall, the phone had no other way to find the
gateway until it was paired again.
- `serve` listens on the same UDP port every time. It picks one on first run,
keeps it in `<config dir>/mobile/port`, and moves only if the port is taken.
IPv6 binding may fail, as in iroh's own defaults.
- Both ends add mDNS lookup (`iroh-mdns-address-lookup`, service `_tty7._udp`).
On the same network a phone finds the gateway by key when its addresses are
stale, such as after a new DHCP lease or a new IPv6 prefix. The gateway
advertises and the phone only listens. If multicast is refused, each side
starts without it and says so, rather than failing.
- iOS: `Info.ios.plist` declares the local-network use and the Bonjour
service, without which iOS blocks multicast.
- An ignored test (`--test mdns`) connects by key alone over mDNS, for a
machine that allows multicast.
* feat(mobile): run the gateway in the desktop daemon, paired from Settings
Phone access no longer needs `tty7-gateway serve` in a terminal.
Settings → Mobile switches it on, and the local daemon runs the gateway from
then on, with every window closed as well. That is where the panes a phone
reaches live anyway.
- Settings → Mobile, in all three locales:
- an "Allow phone access" switch;
- a status line (running, starting, off, or why it failed);
- "Show code", which draws the QR code and the tty7pair: code with a
Copy button, and closes on its own once a phone uses it;
- the paired phones, each with Unpair.
The section is in search, including by its config key `mobile_access`.
- The daemon (`tty7-app --daemon`) runs a supervisor (`core::mobile`). It
watches `mobile_access` in config.json, re-reading only when the file
changes, and starts or stops the gateway. A failed start is retried every
30 s and logged once.
- tty7-gateway grows a `service` module: `start()` returns a stoppable
handle, and `pair_code()` makes a code. The CLI's `serve` and `pair` are
thin wrappers over them now. The gateway logs through `log`, so the
daemon's output lands in its log file, and it reports itself in
`mobile/status.json`. `State::serving()` checks the lock, which a crash
cannot leave stale. A gateway that cannot take the lock leaves the
status alone, because it belongs to the one holding the lock.
- iroh is linked into the GUI binary only. tty7-server stays the lean static
binary pushed to remote machines.
* feat(mobile): serve phones whichever daemon is running
A daemon started by `tty7 server start` is the lean tty7-server, which
carries no gateway. With phone access on, the Settings status stayed on
"Starting…" and no phone could connect.
The GUI now checks, 5 s after it starts and whenever phone access is
switched on. If nothing is serving, it starts `tty7-app --mobile-gateway`,
detached the same way as the daemon (`spawn::detach_helper`). The helper
serves until the switch goes off, and exits at once if another process
already holds the gateway lock. When the daemon's own gateway is up, no
helper is started. The helper logs under its own role, "mobile".
* refactor(mobile): the daemon owns the gateway, as a child, whoever started it
There were two ways of running the gateway: a thread inside `tty7-app
--daemon`, and a detached helper the GUI started when the daemon could not.
That is now one way.
Every daemon, whether `tty7-app --daemon` or `tty7-server`, runs
`tty7_core::daemon::mobile::supervise` from `run_with`. While
`mobile_access` is on it keeps the gateway running as a child process, and
stops it when the switch goes off.
- Which program: `tty7-app` runs itself as `--mobile-gateway`. `tty7-server`
runs a `tty7-gateway serve --exit-with-stdin` from beside it or on PATH,
and links nothing new. Without one, it writes the reason into
`mobile/status.json` for Settings to show, instead of "Starting…" forever.
- Lifetime: the child's stdin is a pipe from the daemon, and the gateway
exits when it closes. A stopped, crashed or handed-off daemon (the pipe
is close-on-exec) takes its gateway with it, and the next daemon starts
one from its own binary. No gateway from an older build survives an
update.
- Isolation: iroh no longer runs inside the process that holds every pane.
- `Status` moves to tty7-core, the one definition that the daemon, the
gateway and the GUI all share.
- Gone: the GUI's helper check (`core::mobile` in the app) and the in-daemon
gateway thread.
* fix(mobile): stop and reap the gateway before a daemon handoff
Found by running a real `tty7 server restart`. The old gateway did exit,
because the new image's supervisor started its own gateway and the old one
lost the lock. But it was left as a zombie: the image after the exec never
reaps a child it did not start, so each handoff leaked a process entry.
`hand_over` now calls `daemon::mobile::stop_for_handoff` before the exec,
which closes the gateway's stdin and waits for it. A flag keeps the
supervisor from starting another in the moments before the exec, and
`handoff_failed` clears the flag if the exec never happens, so the daemon
goes on serving.
Checked with two handoffs in a row (tty7-app → tty7-server → tty7-server):
- each old gateway was reaped, with no zombies system-wide;
- exactly one fresh gateway was running after each handoff;
- the pane's shell and its environment survived;
- the probe phone kept working.
* feat(mobile): the switch shows whether phones can reach you, not a status row
Settings → Mobile had an "Allow phone access" switch that showed intent and a
separate Status row that showed reality. That is one thing shown twice, and
the switch could sit on while nothing was running.
- The switch is the state. Switching on holds it at "Starting…", disabled,
until a gateway is actually serving. If the daemon reports a failure, or
nothing comes up within 15 s, the switch goes back off, `mobile_access`
is reverted, and a notification says why.
- If the page opens on a failure the daemon is still retrying, the switch
shows off with the reason in its description, and switching it on
retries.
- The Status row is removed, with its four strings. There are two new
strings for the failure, in en, zh and ja.
Also fixes the Settings window never showing notifications. It is a `Root`
like the workspace window but did not draw the notification layer, so any
toast pushed from Settings was queued and never shown. That included the
existing "Set as Default Terminal" result.
Checked in a dev instance. On a tty7-server daemon with no tty7-gateway:
Starting… first, then off, with "Phone access could not start: … no
tty7-gateway beside it or on PATH". On a tty7-app daemon: on, with Show
code enabled and no toast.
* feat(mobile): drop the "Needs you" section
The machine screen gathered every pane whose agent was waiting or done into
a "Needs you" section above the workspaces. Done lasts until the next prompt,
so the section grew with every finished agent and mostly held panes that
needed nothing.
Panes now appear once, in their own workspace. Each keeps its status badge
and words ("Needs input", "Working", "Done") and the agent's message.
PRODUCT.md and the design sidecar are updated to match.
* fix(mobile): say when typing doesn't reach the pane
The gateway's input thread gave up silently on a failed send_input, and
the app's input task did the same on a failed write, so the phone kept
showing a live pane while keystrokes went nowhere. Both now report the
failure as a pane error. Keys after it are dropped rather than ending
the stream, which the phone would read as the pane closing.
* feat(mobile): a compose box, paste and Shift+Tab on the terminal
Replying to an agent meant typing into xterm a character at a time,
without autocorrect, dictation or a usable IME. The compose box is a
real text field: Send types the text and then Enter, as its own write,
and several lines go in as one bracketed paste when the program asked
for it. Drafts survive leaving the pane and a send that failed. An
agent's pane opens on the box with the keyboard down.
The key bar gains Shift+Tab (Claude Code's mode switch) and a paste key.
A failed keystroke now takes the pane offline with a Reconnect banner
instead of being swallowed.
* feat(mobile): reconnect on its own, and select text to copy
A dropped pane or machine stream is retried with backoff (1s, 2s, 4s …
15s) and at once when the network comes back, rather than waiting for a
tap on Reconnect. The pane keeps its last screen up until the new
replay starts, and output or errors from a replaced stream are ignored.
Touch selection does not work in xterm, so a copy key lays the whole
buffer out as plain text over the pane, wrapped to the phone and joined
where the terminal wrapped, for the phone's own selection and Copy.
* feat(daemon): size leases, and Take Back on the desktop
An observer can now run a pane at its own size (ClientMsg::Lease, feature
size-lease). The pty and every observer go to that size. The controller
keeps its grid, its resizes are remembered rather than applied, and the
pane goes back to the last of them when the lease ends: the observer lets
go, its connection closes, or the controller takes it back.
A controller hears about leases only after asking (Watch), since an older
client cannot decode DaemonMsg::Lease. The desktop asks on every attach,
spawn and relink where the daemon advertises the feature, locally or
through the host hello for remote workspaces, and shows the pane as in
use on the phone with a Take Back button.
* feat(mobile): take a pane over at the phone's size
The terminal's phone button asks the gateway to run the pane at the
phone's grid (PaneRequest::TakeOver), which it turns into a size lease on
the observer connection, named after the paired device. The grid follows
the keyboard and rotation; leaving the pane, or the connection dropping,
gives it back. When the desktop takes it back the app says so and offers
to take it over again, never doing it on its own. A daemon too old for
leases is reported, and the pane keeps working.
* fix(mobile): link SystemConfiguration and install a rustls provider on iOS
The first iOS build failed to link: netdev and system-configuration, pulled
in by iroh, need SystemConfiguration.framework, which the generated Xcode
project does not list. bundle.iOS.frameworks adds it on `tauri ios init`.
Once linked, the app panicked at launch: iroh builds its reqwest client with
`rustls-no-provider`, so a process-wide crypto provider must be installed
before any client is built. Install ring's, which is already in the tree.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix(mobile): keep the terminal's scrollbar on screen while panning
Panning a pane wider than the phone scrolled xterm's own box sideways with
the text. The box was only the view's width, so its vertical scrollbar
panned off with the columns and its scrollback stopped taking touches past
the first screen. The box now spans every column, and the bar is shifted
to the visible right edge as the view pans.
The bar is also drawn like the indicator WebKit shows for the pan, thin,
rounded and translucent, instead of VS Code's 14px square slider, so the
two axes match.
Co-Authored-By: Claude <noreply@anthropic.com>
* feat(mobile): pair by scanning the QR code, and Enter and quick-answer keys
Pairing took a pasted `tty7pair:` code, which on a real phone means getting
text off the desktop somehow. A Scan button next to Paste now reads the QR
code tty7 shows, through tauri-plugin-barcode-scanner, and pairs straight
away. The camera runs behind the WebView with our own viewfinder and Cancel,
since the plugin's full-screen view has no way out. The plugin is registered
on phones only, so the desktop dev build is unchanged.
The key bar gains Enter, so an agent's highlighted choice can be confirmed
without raising the keyboard, and 1 2 3 y n for numbered choices and y/n
prompts.
Co-Authored-By: Claude <noreply@anthropic.com>
* chore(mobile): sign for the App Store and declare exempt encryption
Sets the development team so `tauri ios init` writes it into the Xcode
project, and marks the app's encryption (standard TLS/QUIC only) as exempt
so TestFlight uploads skip the export-compliance question.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix(mobile): count the iOS safe areas once
The WKWebView's scroll view inset its content by the safe areas, and the
page, laid out with viewport-fit=cover, padded by env(safe-area-inset-*)
as well. The viewport came out 778pt tall on an 874pt screen: everything
sat a status bar's height too low, with a blank band under it. The scroll
view's automatic inset adjustment is now off, so the page runs edge to
edge and its CSS alone keeps clear of the status bar and home indicator.
Co-Authored-By: Claude <noreply@anthropic.com>
* feat(mobile): the Terminal Mobile redesign
The app takes the desktop's neutral greys, light and dark, with ink rather
than a system blue for what is pressed or chosen.
- Machines: pairing's "+" moves to a floating bar at the bottom beside a
search field. Each machine shows its link, round trip and tab count as
last seen.
- A machine: tabs grouped by workspace with a count; round agent glyphs;
a dot on the right for running or waiting on you. The per-group New tab
buttons give way to one "+" in the same floating bar, beside tab search.
- New tab: a sheet to pick Claude Code, Codex or a shell, and the
workspace. An agent's command is typed into the new tab once it is live.
- A pane: the bar keeps only back, the title with its state, and a menu
for selecting text, the fit and the phone's size. Under it, one row of
equal keys, a page at a time, and a message box that is always there;
its round button sends, or when empty hands the keyboard to the
terminal.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix(mobile): the tty7 mark as the iOS app icon
The phone showed Tauri's default icon: `tauri ios init` filled the Xcode
project with it. The committed icons/ios set was drawn on the macOS grid,
a rounded tile inset on transparency, which iOS would shrink inside its own
mask with a pale border. icons/app-icon-ios.svg is the same Duo mark full
bleed, rendered without alpha as the App Store requires.
Claude-Session: https://claude.ai/code/session_01HVosmYyVSH3BrsLYx3tcSS
* fix(mobile): typing, scrolling and pairing on a real phone
- Typing into a pane: an input method's text never reached it, since iOS
never commits a candidate into xterm's hidden textarea. Tapping the
terminal now focuses a plain field of our own, whose committed text goes
to the pane as it is committed. Backspace on the empty field, Enter, Tab
and the arrows go as the terminal's keys.
- xterm sends nothing itself any more (disableStdin). That also stops the
phone answering a program's colour and device queries: the desktop
answers those, and the phone's late second answer landed in the shell as
typed text.
- Scrolling the scrollback: xterm 6 has no working touch scrolling. A
mostly vertical swipe now scrolls the buffer a row at a time and coasts;
a sideways one is left to the native pan.
- Pairing: the steps name the desktop's Settings -> Mobile, Allow phone
access and Show code, not a command-line gateway, and so do the notices
when a machine cannot be reached.
Claude-Session: https://claude.ai/code/session_01HVosmYyVSH3BrsLYx3tcSS
* fix(mobile): room for the keyboard, and smoother vertical scrolling
- The keyboard: the WebView runs edge to edge and is not resized for it,
so it covered the dock and the pane's last lines. The app now takes the
size of the visual viewport, drops the home indicator's gap while the
keyboard is up, and keeps the cursor's line in sight.
- Scrolling: the terminal draws with xterm's WebGL renderer, which a
scroll does not make lay every row out again. A swipe is applied once a
frame, and moves the view by pixels: xterm scrolls whole rows, and the
rest of a row is a GPU shift of the drawn screen, put on together with
the rows it goes with.
Claude-Session: https://claude.ai/code/session_01HVosmYyVSH3BrsLYx3tcSS
* feat(mobile): settings, message history, and a tighter home screen
- Settings, from beside the Machines title: appearance (automatic, light,
dark; the status bar and keyboard follow through the window's interface
style), terminal text size, how a pane wider than the phone first shows,
clearing the message history, and the version.
- The message box keeps what it sends on the phone. As a message is
written, past ones that match take the key row's place; with the box
empty, a History button opens them all, searchable. A line that asks for
a password is sent but not kept.
- ^R on the third key page, for the shell's own history search.
- A top-level screen's bar floats over the list, clear until the title
scrolls under it, so the large title sits just under the status bar.
Claude-Session: https://claude.ai/code/session_01HVosmYyVSH3BrsLYx3tcSS
* fix(mobile): a fitted pane fills the view, and its scrollbar drags
- A pane shorter than the view (a wide one, fitted) no longer leaves the
bottom of the screen blank: the terminal here runs as many rows as fill
the view, the extra ones holding the pane's earlier lines, and what is
left over goes above so the prompt stays next to the keys. The pane on
the desktop keeps its size.
- A drag that starts on the scrollbar is left to xterm. The swipe handler
took it too, the other way round, and the two cancelled out.
Claude-Session: https://claude.ai/code/session_01HVosmYyVSH3BrsLYx3tcSS
* fix(mobile): errors say what to do in the app, not on the command line
The messages a phone shows, and the two Settings → Mobile can, named the
gateway process, the CLI's `tty7 server start`, the transport and a lock
file's path. They now speak of tty7 on the computer and of pairing: open
it there, update it, pair again, quit the other copy.
Claude-Session: https://claude.ai/code/session_01HVosmYyVSH3BrsLYx3tcSS
* style: rustfmt the gateway and mobile client
Claude-Session: https://claude.ai/code/session_01HVosmYyVSH3BrsLYx3tcSS
---------
Co-authored-by: Claude <noreply@anthropic.com>
|
||
|
l0ng-ai
|
eec9350ff8 |
test(git): compare repo roots in one spelling so Windows passes (#1013)
canonicalize answers \\?\C:\... on Windows while git prints C:/...; the production path already folds the first into the local spelling in probe_repo, only the test compared them raw. |
||
|
l0ng-ai
|
12ec0c92a9 |
fix(sidebar): stop ungrouping tabs when a git probe fails (#1011)
A tab's auto group comes from probing its cwd for a repository. Any failure of that probe - git failing to spawn, the macOS /usr/bin/git shim dying while Xcode is mid-switch, a remote link dropping - came back as "not a repository", overwrote the tab's remembered group, and was never re-checked while the pane sat idle. Tabs in perfectly good repositories dropped into Ungrouped and stayed there. - Read root, home and branch in-process on this machine with gix-discover instead of three git processes. Only the line counts still come from `git diff --numstat`, so they keep matching the diff views; a detached HEAD is still named by git for the same reason. - Remote hosts keep asking their own git (a new control request would force a dialect bump), but the probe now tells "not a repository" (exit 128, or the directory is gone) apart from a failure. - A failed probe leaves the cache as it was, so a tab keeps its remembered group, and an unanswered cwd is retried every 10s. |
||
|
l0ng-ai
|
8cf31c718d |
feat(worktree): setup, .worktreeinclude, agent launch, recoverable removal, and a worktree CLI (#1009)
* feat(worktree): setup script, .worktreeinclude, fresh base, recoverable removal - Start new worktrees from the remote default branch, fetched first, with --no-track; fall back to the current branch without a remote. - Carry gitignored files listed in .worktreeinclude over from the main checkout, copy-on-write (clonefile on macOS, copy_file_range elsewhere); remote hosts copy through the Host trait under a size budget. - Run .tty7/setup in the first pane before the agent, with TTY7_ROOT_PATH, TTY7_WORKTREE_PATH, TTY7_WORKTREE_NAME and a per-worktree TTY7_PORT block. The script only runs once its exact content is approved for the repo. - The New Worktree dialog picks what the first pane starts (Shell or a recent agent) and takes a task for agents that open on a first message. - Removal snapshots the checkout, uncommitted work included, under refs/tty7/trash/<name> first; the ref also retires the name. A branch git refuses to delete is reported instead of silently kept. - Hide .tty7/worktrees via info/exclude rather than a catch-all .tty7/.gitignore, so .tty7/setup can be committed. * feat(cli): tty7 worktree new/ls/rm - worktree new: the GUI dialog's worktree from the command line — create, carry .worktreeinclude, open a tab named after the branch, and type .tty7/setup && <agent> [task] into it. Prints the path first. - worktree ls: every checkout of the repo, tty7's marked, with the live panes working in each. - worktree rm: refuses while panes are inside unless --close-panes, and a dirty checkout unless --force; reports the snapshot ref and a kept branch. - Move shell_quote and the first-line builders into tty7-core so the GUI and the CLI type the same line. - Docs: CLI reference and the Worktrees page cover .worktreeinclude, .tty7/setup, TTY7_PORT and recoverable removal. * fix(worktree): run setup and the agent inside the worktree; Start is a dropdown - The first line now opens with cd into the worktree: a shell's startup files can move the pane, and setup then ran in (and wrote into) the main checkout. - The Start choice is a dropdown listing Shell and every agent this machine offers, instead of a segmented switch capped at three. |
||
|
l0ng-ai
|
241b91d70b | chore(release): v26.9.4 v26.9.4 | ||
|
l0ng-ai
|
4e97498e2c |
fix(editor): ⌘R / ⌘⌥F no longer crash the app
Bumps gpui-component to d4ad0c10: opening the replace row from the shortcut read the editor back while it was being updated, and panicked. |
||
|
l0ng-ai
|
c5cdf5382b |
feat(editor): redesigned find bar with a replace shortcut
Bumps gpui-component to e9dd0538: - The find bar is one filled pill (search glyph, field, case, replace, "3 of 6" count, up/down, close) with no border or rule, and it no longer stacks its own padding on the editor's. - The current match is amber, the other hits a neutral wash, so Enter visibly moves between them in any theme. - ⌘⌥F / ⌘R (Ctrl+H elsewhere) opens find with the replace row. The breadcrumb row drops to 22px and sets the symbol in the code font. |
||
|
l0ng-ai
|
ff456165e6 | docs: drop the Customization row from the README feature table | ||
|
l0ng-ai
|
4b1336b089 |
fix(prompt): set the text prompt in the Interface font (#1008)
gpui paints a prompt as a root of its own, beside the window's Root, so it inherits nothing Root sets: the card fell back to gpui's .SystemUIFont instead of the Interface font the rest of the chrome uses. Also add a test that the quit-and-stop question never falls through to the platform dialog (gpui's unthemed single-line fallback on Linux, #920). |
||
|
l0ng-ai
|
9c1961de39 |
fix(agent-hooks): make the OpenCode plugin load on OpenCode 2.x (#999) (#1007)
OpenCode 2.x only loads a default export shaped { id, setup | effect } and
rejects the file otherwise ("Plugin must export a default definition with
an id and an effect or setup function"). The generated tty7.js only had a
named export, so every 2.x user got a load error.
- Export default { id, server, setup }: 1.x (>= 1.3.4) reads `server`,
2.x reads `setup`; the named Tty7Presence export stays for older 1.x.
- 2.x: subscribe via ctx.event.subscribe(), read event.data, map
permission.asked, and treat session.created with a parentID as a child
session. Stay inert inside the shared --service process, whose sessions
belong to no single pane.
- Spawn the emitter directly with node:child_process instead of
`sh -c`, which does not exist on Windows.
|
||
|
l0ng-ai
|
7f66f69674 |
fix(ssh): pin russh to our fork with the zlib truncation fixes (#997) (#1006)
A host with `Compression yes` (every one imported from an ssh config that sets it) negotiated zlib@openssh.com, and the pinned ayamir/russh rev cut every packet that inflated past 2x its compressed size. The zlib stream desynced right after auth: the session showed as connected and never printed a byte. - Move the [patch.crates-io] pin to l0ng-ai/russh (branch tty7): ayamir's gssapi-with-mic commit plus Eugeny/russh 58886f4d and 24e2c374. - Add an end-to-end test that runs a zlib session against an in-process russh server and checks every byte of a compressible + incompressible payload arrives (0 of 270336 bytes on the old pin). - Re-importing an ssh config now updates `algorithms` on hosts that already exist, so dropping `Compression yes` and re-importing takes effect. |
||
|
l0ng-ai
|
4f8237f361 |
docs: fix the landing page for real — no JS comments in export bodies
The hosted Mintlify build fails to parse any page with a JS comment (line or block) inside an export body and serves a parse-error placeholder instead; mint dev and mint validate accept the same page. Confirmed with diagnostic pages: the prefix with the sidebar's // comment fails, the same prefix without it renders, and turning it into /* */ still fails. Move both comments to top-level MDX comments, note the rule in the file, undo the earlier % escaping (that guess was wrong), and remove the diagnostic pages. |
||
|
l0ng-ai
|
9e05627ff2 |
docs: drop // comments from the landing page; add diagnostic pages
The % fix did not bring the hosted landing page back. The first // line comment in the file sits in the range that breaks, so turn the two into block comments, and add temporary unlinked pages that isolate the remaining suspects. They are removed once the cause is confirmed. |
||
|
l0ng-ai
|
9cabeddb14 |
feat(editor): v6 chrome — recency-capped file strip, open-files list, Dock/Fill switch (#1005)
The header keeps only the most recently fronted files (3 docked, 7 filled, fewer with side panels open) in their strip order; the rest sit behind a +N button that lists every open file with a filter, keyboard navigation and Close saved / Close others. A two-cell Dock/Fill switch replaces the header's right-click menu, and a filled editor leads with a pill naming the terminal it covers that docks it back. Breadcrumbs lose their rule and use chevrons, with only the file name in body ink. The status bar is 28px, leads with a missing language server, and reads cursor, indent, encoding, line ending, language; the actionable readouts answer hover and the cursor opens Go to Line. |
||
|
l0ng-ai
|
591a50a9c1 |
docs: fix the landing page failing to parse on the hosted build
The hosted Mintlify build percent-decodes page content before parsing it, so the pane id "%22" in the demo became a bare quote and the whole page fell back to the parse-error placeholder. Local mint dev/validate do not decode, so they never saw it. Spell the pane ids' % as \u0025. Also drop the temporary diagnostic pages used to bisect this. |
||
|
l0ng-ai
|
7d3cee4d71 |
feat(editor): v6 chrome — recency-capped file strip, open-files list, Dock/Fill switch
The header keeps only the most recently fronted files (3 docked, 7 filled, fewer with side panels open) in their strip order; the rest sit behind a +N button that lists every open file with a filter, keyboard navigation and Close saved / Close others. A two-cell Dock/Fill switch replaces the header's right-click menu, and a filled editor leads with a pill naming the terminal it covers that docks it back. Breadcrumbs lose their rule and use chevrons, with only the file name in body ink. The status bar is 28px, leads with a missing language server, and reads cursor, indent, encoding, line ending, language; the actionable readouts answer hover and the cursor opens Go to Line. |
||
|
l0ng-ai
|
7e23dd6ff1 |
fix(ui): widen three-answer prompts so the update dialog's buttons fit
The alert card is a fixed 360px and its buttons never shrink, so the update prompt's three answers (Update and relaunch / Install on Next Launch / Later) ran past the edge and were clipped. Prompts with three or more answers now use a 460px card, and the answer row wraps (still flush right) as a fallback for locales with longer labels. |
||
|
l0ng-ai
|
5d8e454949 |
docs: temporary diagnostic pages for the landing page parse error
Hidden, unlinked pages holding prefixes of index.mdx, to find which part the hosted Mintlify build fails to parse. Removed in the follow-up fix. |
||
|
l0ng-ai
|
5e2b28be67 |
ci(host-boundary): allow the local stat on paste/drop upload sources
#1004 stats the source of a paste or drop upload to decide whether to upload recursively. That path comes from this machine's clipboard or desktop, so it is a local read by construction. |
||
|
l0ng-ai
|
afe24f0afc |
feat(terminal): upload pasted and dropped files to remote panes (#1004)
Copying a file in Finder and pasting it into an SSH pane, or dropping one onto it, used to paste this machine's path — which the remote program cannot open. Only clipboard images were uploaded first. Every local path a pane is handed now goes through one route: uploaded into its own directory under ~/.cache/tty7/clipboard on an SSH host (so it keeps its real name), rewritten for WSL, and pasted as-is locally. Folders upload recursively, a transfer is only abandoned once it stops moving, and staged pastes older than a week are pruned. Rows of a remote Files tree now drag as their own type instead of ExternalPaths, so no drop target mistakes a far-side path for a local file. |
||
|
l0ng-ai
|
7016fdb7ed |
feat(editor): IDE-level code editor — multi-cursor, LSP, git gutter, symbols, split (#1002)
* fix(keymap): let the code editor's multi-cursor chords beat the pane keys
gpui-component now binds secondary-d, secondary-shift-l and
secondary-alt-up/down in the Input context for multiple cursors. A
context-free binding ranks as deep as the focused context and ties go to
the one added last, so tty7's SplitRight and FocusPaneUp/Down took those
keys inside the editor. Re-add the editor bindings after tty7's table; other
text fields have no handler for them and fall through to the pane keys.
* feat(editor): show the selection count in the status bar
With several cursors the Ln/Col readout (the primary caret's) is followed
by "(N selections)".
* feat(editor): git change markers in the gutter
Diff each buffer against its file's index version (what VS Code's quick
diff and the SCM panel's Changes compare with) and hand the hunks to the
editor as gutter markers: added, modified, and a wedge where lines were
deleted. The base is read with `git show :./name` through the buffer's own
host, so remote workspaces work too; SFTP buffers and untracked files get
no markers. It is re-read when the repository's SCM epoch moves, on save
and when the path changes; the diff itself is a line-level Myers diff run
off the UI thread shortly after each edit.
Next/previous change and Revert Change (one undo step, also in the
right-click menu) are commands; clicking a marker opens a peek of the
staged lines with a Revert button. The editor watch now also follows the
repository the gutter found, so a stage or checkout refreshes the markers.
The `editor_git_gutter` config (default on) is flipped by the
ToggleEditorGitGutter command.
* feat(editor): go to symbol, breadcrumbs, and back/forward navigation
Go to Symbol (Cmd-Shift-O in the editor) lists the file's outline on a new
Symbols tab of Search Everywhere: indented by nesting while browsing, ranked
flat with the containing symbols as a subtitle while searching. Arrowing
through the rows previews each symbol; Escape puts the caret and the scroll
back, Return keeps it.
The outline comes from the tree the highlighter already parsed, with a small
query per language (Rust, Go, Python, JavaScript, TypeScript/TSX, C, C++,
Java, Markdown, Ruby, shell). Tty7App::editor_set_document_symbols lets a
language server's documentSymbol answer replace it per buffer.
A breadcrumb row over the text shows the file's path from its project root
and the symbols around the caret; the symbols open Go to Symbol.
Back and forward (Ctrl-- / Ctrl-Shift-- on macOS, Alt-Left/Right elsewhere)
walk a per-tab history. Jumps are noticed by sampling the caret whenever the
editor draws: a change of file, or a move of ten lines or more without an
edit, records where the caret was. Quick open, go to line, file links and
anything that goes through open_file_in_editor_at are therefore captured
without hooks of their own; a place in a closed file reopens it.
* feat(editor): bind next/previous change to Alt+F5 in the code editor
Bind EditorNextChange / EditorPrevChange to alt-f5 / shift-alt-f5 in the
Input context only, after tty7's own table, so a terminal never loses the
function key. Mark the hunks stale right after a revert, before the
input's Change event lands, and cover the whole loop (markers, stepping,
revert as one undo) with a window test.
* feat(editor): line commands in the editor's right-click menu
Toggle Comment, Move Line Up/Down, Duplicate Line, Delete Line and Go to
Matching Bracket, dispatched to gpui-component's new editing actions so
each row shows its chord. Strings in en, zh and ja.
* feat(editor): language servers for the code editor
A new ui::lsp module runs language servers for local files the editor
opens: rust-analyzer, typescript-language-server, pyright (or pylsp),
gopls and clangd, from a registry table. Each server is keyed by
(server, project root), found from markers such as a Cargo workspace,
package.json, go.work/go.mod or pyproject.toml, and shared by every buffer
under that root. A server missing from PATH (which tty7 already fills from
the login shell) means no LSP for that language and a one-line hint in the
status bar.
The JSON-RPC client frames Content-Length messages over the server's stdio
on dedicated threads, holds everything back until initialize is answered,
cancels requests nobody waits for any more, and answers the server's own
requests (configuration, capability registration, applyEdit). Documents
use full-text sync, debounced, and flushed before every request. A server
whose last file closed shuts down after a grace period, every server exits
with the app, and one that crashes is restarted a few times before it is
left down.
Features: diagnostics as underlines with hover messages and an error and
warning count in the status bar; completion (snippets flattened to plain
text); hover; go to definition by secondary-click or F12, across files
through open_file_in_editor_at; code actions on the editor's own menu
(cmd-.), resolved and executed as the server needs; Format Document
(shift-alt-f); and Rename Symbol (F2) in the editor's bar, applied to open
buffers and to files on disk. The key bindings sit in the Input context so
F2 and F12 stay with terminal programs.
Positions are converted at the boundary: servers count UTF-16 units,
gpui-component counts chars, and the rope counts bytes.
The new editor_lsp setting (default on) turns it all off.
* fix(editor): clear the change markers when the file loses its base
A file that becomes untracked or leaves its repository kept the markers
of its last diff; clear them when the base goes away. Guard the base read
against a panic, which would otherwise leave the fetch flagged forever,
and test the read against a real repository: the base is the staged
version, and untracked files have none.
* test(keymap): the editor's navigation chords win inside the editor, not in a terminal
* fix(keymap): let the code editor's line commands beat the app's chords
The editor binds toggle comment, move/copy/delete line, insert line, select
line and go-to-bracket on its CodeEditor key context. A context-free app
binding ranks as deep as the focused context and wins the tie by being
added later, so ⌘/ (shortcut sheet), ⌘↵ (fullscreen), ⌘⇧↵ (maximize) and,
off macOS, ⌥↑/⌥↓ (pane focus) took those keys inside the editor. Re-add
them in fixed_bindings on CodeEditor, which only a multi-line code editor
declares, so plain text fields and the terminal keep the app's keys.
* fix(keymap): route cmd-K cmd-D to the code editor's skip-occurrence
The chord starts with ClearScrollback's key on macOS, and gpui drops a
pending chord that ranks below a complete match, so the fork's binding
never got its second key. Re-add it after tty7's table, in the CodeEditor
context only, so other text fields don't wait on cmd-K.
* feat(editor): history follows edits, and paging is not a jump
Places in the back/forward history now move with lines inserted or deleted
above them, read from the editor's line-edit log on every change. The caret
move a Page Up/Down, paste, undo or redo makes is heard through the
keystroke that caused it and is not recorded as a jump.
* feat(editor): Problems list, keyboard change peek, Editor settings
- Problems: every error, warning and note the language servers published
for the open files, grouped by file, at the foot of the code panel.
The status bar's counts and ToggleEditorProblems (Cmd/Ctrl+Shift+M)
open it; a row opens its file at the line and column. Read through a
new LspStore::diagnostics_snapshot, mapped to editor columns.
- EditorPeekChange (Alt+F3 in the editor) peeks the change under the
caret, or goes to the next one. The peek now takes the keyboard from
a click too: Enter reverts, Escape closes and hands focus back.
- Settings > General gains an Editor group: git change markers,
language servers, soft wrap and rendered Markdown, searchable and
resettable like every other row.
* feat(lsp): outline, references, workspace symbols, signature help
- documentSymbol feeds the editor's outline (breadcrumbs, Go to Symbol)
through editor_set_document_symbols, refreshed 500 ms after typing
pauses. Flat answers are nested by range; an empty answer from a server
still indexing leaves the tree's outline in place.
- Find All References (shift-F12) and a definition with several answers
open a Locations tab in the search. Arrowing through it previews a place
in the file in front, and Return goes there, into any file.
- Go to Symbol in Workspace (secondary-T inside the editor) asks the
server's workspace/symbol as the query is typed, into the same list.
- Completion items are resolved for their documentation and auto-import
edits, which are applied on accept (with the gpui-component fork).
- Signature help opens on the server's trigger characters (or on '(' and
','), stays current while typing in the call, and closes when the server
says the cursor has left it or on Escape.
- Diagnostics are replaced wholesale on publish; between publishes the
fork now carries them through edits instead of dropping them.
- workspace/configuration answers from per-server settings, with an empty
object for a section tty7 sets nothing for. rust-analyzer gets
checkOnSave with cargo check, also as initializationOptions, and every
server gets didChangeConfiguration after initialized.
* feat(editor): text commands in the palette and keymap
Transform to Upper/Lower/Title Case, Trim Trailing Whitespace, Join Lines
and Remove Surrounding Brackets, as tty7 actions (bindable on the
Keybindings page, unbound by default) and as palette rows offered while a
buffer is open. Both run gpui-component's editing action on the active
buffer. Join Lines gets VS Code's ctrl-j as a fixed CodeEditor binding on
macOS, where the terminal keeps it as a line feed. Strings in en, zh, ja.
* feat(editor): split the editor into two groups
Cmd-\ (Ctrl-\ off macOS, bound only inside the editor so the terminal keeps
SIGQUIT) opens the file in front in a second group on the right. Each group
has its own file in front and, for different files, its own caret and
scroll; Cmd-Alt-Left/Right (Ctrl-Alt off macOS) or a click moves the focus
between them, and a group whose last file closes goes away. The split is
saved with the tab's other editor state.
The focused group is always TabCode's own files/active and the other waits
beside it, so everything that acts on the file in front - saving, go to
line, language servers, change markers, multiple cursors, history - follows
the focus unchanged. A file shown in both groups is drawn once, in the
focused one; the other shows a placeholder that brings the focus over. A
second InputState kept in sync would have needed every hook attached twice.
Also: palette rows and View menu items for Go to Symbol, Back, Forward and
Split; Cmd-Shift-O closes Go to Symbol when it is open; the status bar no
longer repeats the path the breadcrumbs show (a rendered Markdown file keeps
its breadcrumb path); change markers are kept current in both groups.
* test(keymap): the editor group chords win inside the editor
* fix(lsp): close a window's documents when the window closes
Documents were only closed by sync_window, which runs when a window's
buffer set changes. Closing a window never ran it, so no didClose was
sent, the idle shutdown never started, and a language server lived on
until quit (forever, with the app retired to the tray).
* fix(editor): restore a split whose left group had no recorded files
The recorder writes files: [] with a split when the left group held only
untitled or remote buffers, but restore returned early on an empty left
list and dropped the right group too.
* fix(editor): forget a swept orphan buffer's navigation state
The orphan sweep dropped clean buffers without calling forget_buffer, so
each one's outline cache (a full copy of its text), LSP symbols and
edit-log cursor stayed in EditorNav for the life of the window.
* fix(lsp): owner-only sync, stale-edit checks, request timeouts, re-enable
- Only the buffer that owns a document may use its server. The same file
open in another window used to send its own text as didChange on F12,
rename, references or signature help, swapping the document under the
owner. LspStore::context now takes the requester and refuses a
non-owner quietly, before anything is sent.
- apply_workspace_edit checks every open buffer an edit touches against
a baseline: the texts when a rename was asked for or the code-action
menu was filled, or the text the server last heard for its own
workspace/applyEdit (which then answers applied: false). A buffer typed
in, opened or closed since means nothing is applied.
- A request made after the server's output closed fails at once instead
of waiting forever. Requests time out after 10 s (initialize after 60 s,
shutdown after 2 s) and cancel themselves on the server.
- Turning editor_lsp back on asks every window for its open files again,
which starts their servers. Windows register how to be asked; closed
ones are forgotten.
* test(nav): spell out LineEdit's new at_line_start field
gpui-component's LineEdit now records an insertion at column 0, which
moves the whole line down. The literal edits in this test are mid-line.
* fix(editor): a restore merges into the tab, and commands follow the group focus
Session restore used to assign the recorded groups over whatever the tab
held when its files finished loading, so a file opened or a split made in
the meantime was lost. TabCode::restore_groups keeps a split made meanwhile
as it is, and otherwise lays out the recorded groups and puts the files
opened meanwhile back into the focused group, the last of them in front. A
restore the reader has moved on from no longer takes the keyboard, and never
hides a panel they opened.
The group focus only followed the keyboard when the editor drew. Keys are
safe - gpui draws a window whose focus moved before dispatching the next
key - but a command from the menu bar or a context menu is dispatched
without a draw, and acted on the group that had the focus before. A
capture-phase listener for every editor command on the editor's element now
settles the group first, wherever the command's handler sits.
* fix(editor): leave cmd-T to New Tab; offer workspace symbols from the palette
Inside the code editor cmd-T was rebound to Go to Symbol in Workspace,
which made tty7's most-used chord mean two things depending on focus.
It is New Tab everywhere again. Workspace symbols stay reachable as an
Editor palette row and as a rebindable, unbound action.
* build: pin gpui-component to the fork's editor work (0e7541fb)
* fix(search): let the editor's pickers stand alone in Search Everywhere
Go to Symbol, a language server's places and Go to Symbol in Workspace
opened on hidden tabs, so the window-wide scope row (All, Terminals,
Sessions, Hosts, Commands) sat over them with nothing selected, and Tab
swapped the list for the terminals. They now show a heading in place of
the row (References / Definitions / Symbols / Workspace Symbols, with a
count), Tab stays put, and the footer drops the scope hint.
* fix(search): Go to File stands alone like the editor's pickers
Go to File (cmd-O) is reached only by its chord, yet it sat under the
scope row with nothing lit and offered Tab to leave for the terminals.
Every tab outside the row now stands alone the same way: its name in
place of the row, Tab stays put, no scope hint in the footer.
* feat(search): give the editor its own scope row — Files, Symbols, Workspace Symbols
Go to File, Go to Symbol and Go to Symbol in Workspace were three
separate pickers, each on its own chord. They now share a second scope
row, the editor's, next to the window's: cmd-O and cmd-shift-O open on
it and Tab walks it. Only tabs that can answer show: Symbols needs a
file in front, Workspace Symbols a language server that searches the
project. A row of one shows as a heading. Each tab is opened the way its
chord opens it, so it arrives set up; references and definitions still
stand alone.
* feat(search): fold Workspace Symbols into Symbols
Symbols and Workspace Symbols answered the same question at two scopes.
Symbols now does both: with nothing typed it is the file's outline; once
a query is typed, the front file's language server is asked across the
project and its answers are listed after the file's own, each under a
heading when both have rows (the front file's own hits are dropped from
the project's). The separate tab, action and palette row are gone.
* fix(search): call the language server's project results Project, not Workspace
LSP's workspace/symbol searches the server's project root, which has
nothing to do with a tty7 workspace (a group of tabs). The Symbols tab's
second section said Workspace, reading as if it searched those. It says
Project now, and the tty7-facing names follow (project_symbols,
set_project_symbols, lsp_project_symbol_query); only code that speaks
the protocol keeps its word.
* ci(host-boundary): allow the language servers' local reads
ui::lsp only ever holds local buffers (OpenFile::local refuses any other
host) and runs its servers on this machine, so the files it reads to
measure a column, apply a rename to disk or find a project root are on
this disk. Each call is allowlisted with that reason.
* test(editor): spell test paths so they hold on Windows
The language-server tests used /p/... paths, which are not absolute on
Windows and so have no file:// URI; they now build platform paths
(lsp::test_path) or spell the URI out. The gutter and split tests
canonicalized their temp dirs to get past macOS's /private symlink,
which on Windows yields the \\?\ form no editor path is ever in; they
share a helper that canonicalizes everywhere but Windows.
* test(editor): resolve temp dirs the way the editor does
On the Windows runner the temp dir is an 8.3 short name (RUNNER~1),
which the editor's load expands through Host::canonicalize. The split
tests now resolve their fixtures through that same call instead of
guessing per platform.
|
||
|
l0ng-ai
|
3ef692b353 |
feat(agents): infer interrupted and stale turns, report permission prompts first-hand (#1003)
- Interrupts: an Esc / Ctrl+C (legacy, kitty and modifyOtherKeys forms) on a pane whose agent is mid-turn arms a 1s settle; if no hook event arrives, the turn is assumed over and goes Done. Claude's Stop skips user interrupts, so panes used to stay on working until the next prompt. - Stale turns: a daemon sweep moves a turn that has been Working with no hook event for 30 minutes to Idle. - Both set `inferred` on the session; the next real event clears it, and a tool finishing after a guess puts the turn back on Working. Inferred states raise no finish notification and no unread badge. - Claude and Codex now hook PermissionRequest, and PreToolUse for their ask-the-user tools (AskUserQuestion / request_user_input), so Waiting shows the moment the prompt opens. Codex also gains PostToolUse, so it leaves Waiting once the approved tool has run. - The "finished" desktop notification waits 1.5s and is dropped if the next turn starts first (queued message, Stop hook sending it back). |
||
|
l0ng-ai
|
ae38747f69 |
feat(terminal): follow links a table wrapped inside its cell (#1001)
Markdown tables (Claude Code's among them) wrap a long cell by hand: each row is a hard newline framed by box-drawing borders, with the next cell's text in between. Hovering or clicking a URL wrapped that way only ever got the fragment on one row, so the link opened truncated. Link lookup now reads a table cell the way it already reads a wrapped row, just inside the cell's own columns: a row carries on into the next when its text reaches the right border and the next row's starts at the left one, with link characters on both sides and the borders lined up. Only `│┃║` count as borders; a bare `|` is too often a pipe. Cells that fit on one row and double-click selection are unchanged. The hover underline is now a run per row instead of one start..end span, so a stitched link underlines just its cell rather than the borders and neighbouring cells between its rows. |
||
|
l0ng-ai
|
2e0d4de136 |
feat(github): show a pull request's checks, reviews and merge state (#1000)
The PR detail now leads with what it is usually opened to find out:
- Checks: check runs and commit statuses on the head commit, failures
first, with durations and links to their logs. A section with more
than five folds the passed and skipped ones into one row.
- Reviews: one row per reviewer (approved, changes requested,
commented, requested), folding the way GitHub's sidebar reads them.
- A merge-state line under the branches ("Waiting on 1 check",
"1 check failing", "Merge conflicts", "Ready to merge", ...).
Checks and reviews that cannot be read are left out instead of failing
the whole detail. While a check is running, just the checks are re-read
every 20 seconds (signed in only); once every verdict is in, the detail
is read again for the new merge state.
The list pins the pull request of the pane's branch under the repo row,
looked up through the branch's upstream so a fork's branch is found
under the fork's owner.
Long sections fold: comments past four keep the first and the latest
two, long descriptions and comments are clamped behind "Show full text",
and reviewers and changed files show a few with a "show all" row.
|
||
 dependabot[bot]
|
2938a41a1c |
deps: bump the cargo-minor-patch group with 6 updates (#998)
Bumps the cargo-minor-patch group with 6 updates: | Package | From | To | | --- | --- | --- | | [encoding_rs](https://github.com/hsivonen/encoding_rs) | `0.8.35` | `0.8.42` | | [uuid](https://github.com/uuid-rs/uuid) | `1.26.0` | `1.26.1` | | [plist](https://github.com/ebarnard/rust-plist) | `1.10.0` | `1.10.1` | | [clap](https://github.com/clap-rs/clap) | `4.6.6` | `4.6.7` | | [toml_edit](https://github.com/toml-rs/toml) | `0.25.13+spec-1.1.0` | `0.25.15+spec-1.1.0` | | [ureq](https://github.com/algesten/ureq) | `3.4.0` | `3.4.2` | Updates `encoding_rs` from 0.8.35 to 0.8.42 - [Commits](https://github.com/hsivonen/encoding_rs/compare/v0.8.35...v0.8.42) Updates `uuid` from 1.26.0 to 1.26.1 - [Release notes](https://github.com/uuid-rs/uuid/releases) - [Commits](https://github.com/uuid-rs/uuid/compare/v1.26.0...v1.26.1) Updates `plist` from 1.10.0 to 1.10.1 - [Release notes](https://github.com/ebarnard/rust-plist/releases) - [Changelog](https://github.com/ebarnard/rust-plist/blob/master/CHANGELOG.md) - [Commits](https://github.com/ebarnard/rust-plist/compare/v1.10.0...v1.10.1) Updates `clap` from 4.6.6 to 4.6.7 - [Release notes](https://github.com/clap-rs/clap/releases) - [Changelog](https://github.com/clap-rs/clap/blob/main/CHANGELOG.md) - [Commits](https://github.com/clap-rs/clap/compare/clap_complete-v4.6.6...clap_complete-v4.6.7) Updates `toml_edit` from 0.25.13+spec-1.1.0 to 0.25.15+spec-1.1.0 - [Commits](https://github.com/toml-rs/toml/compare/v0.25.13...v0.25.15) Updates `ureq` from 3.4.0 to 3.4.2 - [Changelog](https://github.com/algesten/ureq/blob/main/CHANGELOG.md) - [Commits](https://github.com/algesten/ureq/compare/3.4.0...3.4.2) --- updated-dependencies: - dependency-name: encoding_rs dependency-version: 0.8.42 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: cargo-minor-patch - dependency-name: uuid dependency-version: 1.26.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: cargo-minor-patch - dependency-name: plist dependency-version: 1.10.1 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: cargo-minor-patch - dependency-name: clap dependency-version: 4.6.7 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: cargo-minor-patch - dependency-name: toml_edit dependency-version: 0.25.15+spec-1.1.0 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: cargo-minor-patch - dependency-name: ureq dependency-version: 3.4.2 dependency-type: direct:production update-type: version-update:semver-patch dependency-group: cargo-minor-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
  LiuSirandstevelliu
|
e06ba47017 |
feat(tabs): name the agents you run in the New Tab menu (#994)
The + menu lists up to three agents that have actually been run, beside Local and SSH. Other Agents… opens Search Everywhere already filtered to agent. New Agent Tab still starts the one used last. Refs #955 Co-authored-by: stevelliu <stevelliu@tencent.com> |
||
|
l0ng-ai
|
18109018ce |
docs: add a landing page with a live v5 demo
The docs root becomes a custom-mode landing page modelled on the Claude Design "Terminal Redesign v5" window. The hero is an HTML/CSS rebuild of that window that autoplays five chapters taken from the promo storyboard: agent status and notifications, one agent driving another through the tty7 CLI, the editor prompt, Search Everywhere, and sessions outliving the window. It follows the docs light/dark theme and pauses off screen. Agent avatars use the app's own marks and brand colours (CLIAgent:: accent_rgb / icon_path), and status dots use AgentStatus::dot_rgb. The previous introduction moves to /introduction, and the navbar logo now links to the landing page instead of GitHub. All landing-page CSS is scoped under .t7h / .t7w, since Mintlify loads it on every page. |
||
|
l0ng-ai
|
2a9c662ad5 | docs(readme): cover the side panel, tab hibernation and session resume; resync the Chinese README | ||
|
l0ng-ai
|
33d7da60f9 |
fix(sidebar): even group spacing, a pin icon, and a menu under the tabs
The rule between kept and derived groups sat in the list as a child of its own, between two GROUP_GAPs, so kept groups stood more than twice as far from the rest as groups stand from each other. It now takes up the one gap instead of adding another. The kept-group mark is a drawn pin rather than a diamond glyph, on the header and on the pin button an auto header shows on hover. Right-clicking the empty sidebar under the tabs did nothing. The room below the last row now opens New Tab and New Group. |
||
|
l0ng-ai
|
4e8a76261b | fix(terminal): call the right-click menu's clear item just Clear | ||
|
l0ng-ai
|
ee817bae01 |
feat(ui): v5 modal cards, and an IME crash fix in the code editor (#993)
* fix(deps): gpui-component keeps highlight boundaries on char boundaries Typing Chinese through the IME in the code editor could panic the app: after a sync parse ran past its 2ms budget, the stale injection layers put a style boundary inside the committed glyph and the text system split the line mid-character. Debug builds miss the budget often enough to hit it; the fork now snaps every style range to the current text. * feat(ui): bring the modal cards onto the v5 design - Confirmations take v5's alert shape: title and detail as one paragraph, answers beneath, no header row or footer rule, 360px wide and set lower, at eye height. - Dialog buttons take the field's 7px corner and 14px padding; a secondary answer rests on the well's faint fill instead of bare text. - The scrim dims rather than blacks out: 45% dark, 14% light. - The New Workspace form joins the other cards: 12px corner, borderless wells for its fields, an esc cap and the shared 40px footer. |
||
|
l0ng-ai
|
f647a19746 |
feat(editor): draw the editor's right-click menus like the rest of the window (#992)
* feat(editor): draw the editor's right-click menus like the rest of the window The text's menu was gpui-component's native OS menu: another font and material, no shortcuts, and Go to Definition / Show Code Actions that no language server ever enables. It is now a PopupMenu with Attach to Agent (the selected lines ride along as #L3-9), Undo/Redo, the clipboard, Find, Go to Line, and the file's own items: Open in Browser for web files or Open with Default App, Reveal, Copy Path, Copy Relative Path. The file tabs get a menu too: Close, Close Others, Close to the Right, and the same file items. Closing several asks once about unsaved edits. * chore(deps): gpui-component moves the caret on right-click under a host menu |
||
 ARNO
|
643e0f7d95 |
feat(agents): add Qoder CN CLI integration (#988)
* feat(agents): add Qoder CN CLI integration * fix(agents): spell Qoder CN's config override QODERCN_CONFIG_DIR The China build of Qoder resolves its configuration through QODERCN_CONFIG_DIR. The first pass invented QODER_CN_CONFIG_DIR instead, so an install that set the real one was treated as unrelocated: hooks went to ~/.qoder-cn and history was scanned from a directory the CLI never writes to. The test that should have caught it set the same invented name, so it only proved the name agreed with itself. Picks up the rest of the review as well — detect the `qoder-cn` dispatcher beside the other two binaries, call it the mainland-China build rather than a different vendor, and drop the QODER_CN_HOOK_EVENTS alias for the table it only pointed at. The serialized enums keep their variants appended; only the independent ALL arrays moved QoderCLICn next to QoderCLI. |
||
|
l0ng-ai
|
388ddf4303 |
fix(search): label the search entry point "Search…" (#990)
"Everywhere" added nothing: the modal's tabs already say what it covers. |
||
|
|
e94c0d39cb |
fix(path): read the interactive shell's PATH, not just the login shell's (#989)
* fix(path): read the interactive shell's PATH, not just the login shell's The GUI starts with launchd's bare PATH and refills it by running the login shell. A login shell reads .zprofile/.bash_profile and never .zshrc/.bashrc, so every directory exported there was invisible to the app: agent quick launch found only what /opt/homebrew/bin and /usr/local/bin happened to hold, and an agent_launch override could not bring a missing program back, since the override's program is looked up on the same PATH. Probe with -i as well (fish unchanged: it reads its config in every mode) and take the last non-empty line, so an rc that prints a greeting above the echo $PATH cannot be mistaken for the value. * fix(path): bound the interactive PATH probe and bracket its output Running .zshrc/.bashrc on the startup path needs guards the login-only probe could do without: - Read the PATH between markers instead of the last line, so an exit hook that prints after it cannot be taken for the PATH. - Return as soon as the closing marker arrives rather than at EOF: an rc that backgrounds a daemon hands it the pipe, which then never closes. - Give up after 5s and kill the shell, so a slow or stuck rc delays startup instead of preventing it. - Probe after forwarding an open path to a running window, which has no use for the PATH. * docs(changelog): describe the bounded PATH probe --------- Co-authored-by: stevelliu <stevelliu@tencent.com> Co-authored-by: l0ng-ai <24760907+l0ng-ai@users.noreply.github.com> |
||
|
l0ng-ai
|
bc08fc49f4 | fix(deps): gpui-component paints text selection under the glyphs (#991) | ||
|
l0ng-ai
|
39776012e2 |
feat(github): read a repository with whichever gh account can see it (#987)
The GitHub panel borrowed only gh's active account, so a private repository owned by an organisation another signed-in account belongs to read as a 404. When the active account gets a 404, 401 or 403, retry with gh's other github.com accounts and remember, per owner, the one that got through. The other accounts are listed lazily (gh auth status checks each online), and a token from GH_TOKEN/GITHUB_TOKEN keeps its no-fallback meaning. |
||
|
l0ng-ai
|
ce76de975c |
fix(search): keep the empty note clear of the scope row
The empty view replaces the rows, so the list's top padding the scope row is laid over never reached it and the row sat on top of "No results". It now keeps its own clearance and sits left-aligned on the rows' column. Claude-Session: https://claude.ai/code/session_01Aeskbok7Ah7dvKWnaaJFEg |
||
|
l0ng-ai
|
1ba9159408 |
feat(panel): drop the GitHub row from the Info tab
The GitHub tab one over already names the repository and opens it; the row only repeated it. Its upstream lookup goes with it. Claude-Session: https://claude.ai/code/session_01Aeskbok7Ah7dvKWnaaJFEg |
||
|
l0ng-ai
|
23e4ea79f5 |
chore(deps): gpui-component with v5 menus
Picks up l0ng-ai/gpui-component bce0d8ec: popup and context menus take the v5 popover look — a neutral hover step, 28px rows, a hairline ring and v5's long shadow. Claude-Session: https://claude.ai/code/session_01Aeskbok7Ah7dvKWnaaJFEg |
||
|
l0ng-ai
|
689517a632 |
feat(search): call the Actions scope Commands
Claude-Session: https://claude.ai/code/session_01Aeskbok7Ah7dvKWnaaJFEg |