On December 8th, 2023, an engineering escalation (INC-110) was opened
after it was found that BYPASSRLS was being applied to all roles.
PR that introduced the issue:
https://github.com/neondatabase/neon/pull/5657
Subsequent commit on main:
ad99fa5f03
NOBYPASSRLS and INHERIT are the defaults for a Postgres role, but
because it isn't easy to know if a Postgres cluster is affected by the
issue, we need to keep the migration around for a long time, if not
indefinitely, so any cluster can be fixed.
Branching is the gift that keeps on giving...
Signed-off-by: Tristan Partin <tristan.partin@databricks.com>
Signed-off-by: Tristan Partin <tristan.partin@databricks.com>
## Problem
With gRPC `GetPageRequest` batches, we'll have non-trivial
fragmentation/reassembly logic in several places of the stack
(concurrent reads, shard splits, LFC hits, etc). If we included the
block numbers with the pages in `GetPageResponse` we could have better
verification and observability that the final responses are correct.
Touches #11735.
Requires #12480.
## Summary of changes
Add a `Page` struct with`block_number` for `GetPageResponse`, along with
the `RelTag` for completeness, and verify them in the rich gRPC client.
## Problem
Part of LKB-379
The pageserver connstrings are updated in the postmaster and then
there's a hook to propagate it to the shared memory of all backends.
However, the shard stripe doesn't. This would cause problems during
shard splits:
* the compute has active reads/writes
* shard split happens and the cplane applies the new config (pageserver
connstring + stripe size)
* pageserver connstring will be updated immediately once the postmaster
receives the SIGHUP, and it will be copied over the the shared memory of
all other backends.
* stripe size is a normal GUC and we don't have special handling around
that, so if any active backend has ongoing txns the value won't be
applied.
* now it's possible for backends to issue requests based on the wrong
stripe size; what's worse, if a request gets cached in the prefetch
buffer, it will get stuck forever.
## Summary of changes
To make sure it aligns with the current default in storcon.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`GetPageRequest::request_id` is supposed to be a unique ID for a
request. It's not, because we may retry the request using the same ID.
This causes assertion failures and confusion.
Touches #11735.
Requires #12480.
## Summary of changes
Extend the request ID with a retry attempt, and handle it in the gRPC
client and server.
## Problem
One PG tenant may write too fast and overwhelm the PS. The other tenants
sharing the same PSs will get very little bandwidth.
We had one experiment that two tenants sharing the same PSs. One tenant
runs a large ingestion that delivers hundreds of MB/s while the other
only get < 10 MB/s.
## Summary of changes
Rate limit how fast PG can generate WALs. The default is -1. We may
scale the default value with the CPU count. Need to run some experiments
to verify.
## How is this tested?
CI.
PGBench. No limit first. Then set to 1 MB/s and you can see the tps
drop. Then reverted the change and tps increased again.
pgbench -i -s 10 -p 55432 -h 127.0.0.1 -U cloud_admin -d postgres
pgbench postgres -c 10 -j 10 -T 6000000 -P 1 -b tpcb-like -h 127.0.0.1
-U cloud_admin -p 55432
progress: 33.0 s, 986.0 tps, lat 10.142 ms stddev 3.856 progress: 34.0
s, 973.0 tps, lat 10.299 ms stddev 3.857 progress: 35.0 s, 1004.0 tps,
lat 9.939 ms stddev 3.604 progress: 36.0 s, 984.0 tps, lat 10.183 ms
stddev 3.713 progress: 37.0 s, 998.0 tps, lat 10.004 ms stddev 3.668
progress: 38.0 s, 648.9 tps, lat 12.947 ms stddev 24.970 progress: 39.0
s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 40.0 s, 0.0 tps, lat
0.000 ms stddev 0.000 progress: 41.0 s, 0.0 tps, lat 0.000 ms stddev
0.000 progress: 42.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress:
43.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 44.0 s, 0.0 tps,
lat 0.000 ms stddev 0.000 progress: 45.0 s, 0.0 tps, lat 0.000 ms stddev
0.000 progress: 46.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress:
47.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 48.0 s, 0.0 tps,
lat 0.000 ms stddev 0.000 progress: 49.0 s, 347.3 tps, lat 321.560 ms
stddev 1805.633 progress: 50.0 s, 346.8 tps, lat 9.898 ms stddev 3.809
progress: 51.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 52.0 s,
0.0 tps, lat 0.000 ms stddev 0.000 progress: 53.0 s, 0.0 tps, lat 0.000
ms stddev 0.000 progress: 54.0 s, 0.0 tps, lat 0.000 ms stddev 0.000
progress: 55.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 56.0 s,
0.0 tps, lat 0.000 ms stddev 0.000 progress: 57.0 s, 0.0 tps, lat 0.000
ms stddev 0.000 progress: 58.0 s, 0.0 tps, lat 0.000 ms stddev 0.000
progress: 59.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 60.0 s,
0.0 tps, lat 0.000 ms stddev 0.000 progress: 61.0 s, 0.0 tps, lat 0.000
ms stddev 0.000 progress: 62.0 s, 0.0 tps, lat 0.000 ms stddev 0.000
progress: 63.0 s, 494.5 tps, lat 276.504 ms stddev 1853.689 progress:
64.0 s, 488.0 tps, lat 20.530 ms stddev 71.981 progress: 65.0 s, 407.8
tps, lat 9.502 ms stddev 3.329 progress: 66.0 s, 0.0 tps, lat 0.000 ms
stddev 0.000 progress: 67.0 s, 0.0 tps, lat 0.000 ms stddev 0.000
progress: 68.0 s, 504.5 tps, lat 71.627 ms stddev 397.733 progress: 69.0
s, 371.0 tps, lat 24.898 ms stddev 29.007 progress: 70.0 s, 541.0 tps,
lat 19.684 ms stddev 24.094 progress: 71.0 s, 342.0 tps, lat 29.542 ms
stddev 54.935
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
After https://github.com/neondatabase/neon/pull/12240 we observed
issues in our go code as `ComputeStatus` is not stateless, thus doesn't
deserialize as string.
```
could not check compute activity: json: cannot unmarshal object into Go struct field
ComputeState.status of type computeclient.ComputeStatus
```
- Fix this by splitting this status into two.
- Update compute OpenApi spec to reflect changes to `/terminate` in
previous PR
## Problem
If we have catalog update AND a pageserver migration batched in a single
spec, we will not be able to apply the spec (running the SQL) because
the compute is not attached to the right pageserver and we are not able
to read anything if we don't pick up the latest pageserver connstring.
This is not a case for now because cplane always schedules shard split /
pageserver migrations with `skip_pg_catalog_updates` (I suppose).
Context:
https://databricks.slack.com/archives/C09254R641L/p1752163559259399?thread_ts=1752160163.141149&cid=C09254R641L
With this fix, backpressure will likely not be able to affect
reconfigurations.
## Summary of changes
Do `pg_reload_conf` before we apply specs in SQL.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We need to benchmark the rich gRPC client
`client_grpc::PageserverClient` against the basic, no-frills
`page_api::Client` to determine how much overhead it adds.
Touches #11735.
Requires #12476.
## Summary of changes
Add a `pagebench --rich-client` parameter to use
`client_grpc::PageserverClient`. Also adds a compression parameter to
the client.
## Problem
Sometimes we run out of free ports in `PortDistributor`. This affects
particularly failed tests that we rerun automatically up to 3 times
(which makes it use up to 3x more ports)
## Summary of changes
- Cycle over the range of ports to reuse freed ports from previous tests
Ref: LKB-62
## Problem
The communicator gRPC client must support changing the shard map on
splits.
Touches #11735.
Requires #12476.
## Summary of changes
* Wrap the shard set in a `ArcSwap` to allow swapping it out.
* Add a new `ShardSpec` parameter struct to pass validated shard info to
the client.
* Add `update_shards()` to change the shard set. In-flight requests are
allowed to complete using the old shards.
* Restructure `get_page` to use a stable view of the shard map, and
retry errors at the top (pre-split) level to pick up shard map changes.
* Also marks `tonic::Status::Internal` as non-retryable, so that we can
use it for client-side invariant checks without continually retrying
these.
# TLDR
All changes are no-op except some metrics.
## Summary of changes I
### Pageserver
Added a new global counter metric
`pageserver_pagestream_handler_results_total` that categorizes
pagestream request results according to their outcomes:
1. Success
2. Internal errors
3. Other errors
Internal errors include:
1. Page reconstruction error: This probably indicates a pageserver
bug/corruption
2. LSN timeout error: Could indicate overload or bugs with PS's ability
to reach other components
3. Misrouted request error: Indicates bugs in the Storage Controller/HCC
Other errors include transient errors that are expected during normal
operation or errors indicating bugs with other parts of the system
(e.g., malformed requests, errors due to cancelled operations during PS
shutdown, etc.)
## Summary of changes II
This PR adds a pageserver endpoint and its counterpart in storage
controller to list visible size of all tenant shards. This will be a
prerequisite of the tenant rebalance command.
## Problem III
We need a way to download WAL
segments/layerfiles from S3 and replay WAL records. We cannot access
production S3 from our laptops directly, and we also can't transfer any
user data out of production systems for GDPR compliance, so we need
solutions.
## Summary of changes III
This PR adds a couple of tools to support the debugging
workflow in production:
1. A new `pagectl download-remote-object` command that can be used to
download remote storage objects assuming the correct access is set up.
## Summary of changes IV
This PR adds a command to list all visible delta and image layers from
index_part. This is useful to debug compaction issues as index_part
often contain a lot of covered layers due to PITR.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
## Problem
close LKB-253
## Summary of changes
404 for timeline requests could happen when the tenant is intended to be
on a pageserver but not attached yet. This patch adds handling for the
lease request. In the future, we should extend this handling to more
operations.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
I believe the explicit memory fence instructions are
unnecessary. Performing a store with Release ordering makes all the
previous non-atomic writes visible too. Per rust docs for Ordering::Release
( https://doc.rust-lang.org/std/sync/atomic/enum.Ordering.html#variant.Release):
> When coupled with a store, all previous operations become ordered
> before any load of this value with Acquire (or stronger)
> ordering. In particular, all previous writes become visible to all
> threads that perform an Acquire (or stronger) load of this value.
>
> ...
>
> Corresponds to memory_order_release in C++20.
The "all previous writes" means non-atomic writes too. It's not very
clear from that text, but the C++20 docs that it links to is more
explicit about it:
> All memory writes (including non-atomic and relaxed atomic) that
> happened-before the atomic store from the point of view of thread A,
> become visible side-effects in thread B. That is, once the atomic
> load is completed, thread B is guaranteed to see everything thread A
> wrote to memory.
In addition to removing the fence instructions, fix the comments on
each atomic Acquire operation to point to the correct Release
counterpart. We had such comments but they had gone out-of-date as
code has moved.
All the callers did that previously. So rather than document that the
caller needs to do it, just do it in start_neon_io_request() straight
away. (We might want to revisit this if we get codepaths where the C
code submits multiple IO requests as a batch. In that case, it would
be more efficient to fill all the request slots first and only send
one notification to the pipe for all of them)
## Problem
Safekeeper and pageserver metrics collection might time out. We've seen
this in both hadron and neon.
## Summary of changes
This PR moves metrics collection in PS/SK to the background so that we
will always get some metrics, despite there may be some delays. Will
leave it to the future work to reduce metrics collection time.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
All the code talks about "request slots", better to make the struct
name reflect that. The "Handle" term was borrowed from Postgres v18
AIO implementation, from the similar handles or slots used to submit
IO requests from backends to worker processes. But even though the
idea is similar, it's a completely separate implementation and there's
nothing else shared between them than the very high level
design.
## Problem
The gRPC client pools don't reap idle resources.
Touches #11735.
Requires #12475.
## Summary of changes
Reap idle pool resources (channels/clients/streams) after 3 minutes of
inactivity.
Also restructure the `StreamPool` to use a mutex rather than atomics for
synchronization, for simplicity. This will be optimized later.
This PR introduces a `image_creation_timeout` to page servers so that we
can force the image creation after a certain period. This is set to 1
day on dev/staging for now, and will rollout to production 1/2 weeks
later.
Majority of the PR are boilerplate code to add the new knob. Specific
changes of the PR are:
1. During L0 compaction, check if we should force a compaction if
min(LSN) of all delta layers < force_image_creation LSN.
2. During image creation, check if we should force a compaction if the
image's LSN < force_image_creation LSN and there are newer deltas with
overlapping key ranges.
3. Also tweaked the check image creation interval to make sure we honor
image_creation_timeout.
Vlad's note: This should be a no-op. I added an extra PS config for the
large timeline
threshold to enable this.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
When a function is owned by a superuser (bootstrap user or otherwise),
we consider it safe to run it. Only a superuser could have installed it,
typically from CREATE EXTENSION script: we trust the code to execute.
## Problem
This is intended to solve running pg_graphql Event Triggers
graphql_watch_ddl and graphql_watch_drop which are executing the secdef
function graphql.increment_schema_version().
## Summary of changes
Allow executing Event Trigger function owned by a superuser and with
SECURITY DEFINER properties. The Event Trigger code runs with superuser
privileges, and we consider that it's fine.
---------
Co-authored-by: Tristan Partin <tristan.partin@databricks.com>
There are a couple of places that call `CompactionError::is_cancel` but
don't check the `::Other` variant via downcasting for root cause being
cancellation.
The only place that does it is `log_compaction_error`.
It's sad we have to do it, but, until we get around cleaning up all the
culprits,
a step forward is to unify the behavior so that all places that inspect
a
`CompactionError` for cancellation reason follow the same behavior.
Thus, this PR ...
- moves the downcasting checks against the `::Other` variant from
`log_compaction_error` into `is_cancel()` and
- enforces via type system that `.is_cancel()` is used to check whether
a CompactionError is due to cancellation (matching on the
`CompactionError::ShuttingDown` will cause a compile-time error).
I don't think there's a _serious_ case right now where matching instead
of using `is_cancel` causes problems.
The worst case I could find is the circuit breaker and
`compaction_failed`,
which don't really matter if we're shutting down the timeline anyway.
But it's unaesthetic and might cause log/alert noise down the line,
so, this PR fixes that at least.
Refs
- https://databricks.atlassian.net/browse/LKB-182
- slack conversation about this PR:
https://databricks.slack.com/archives/C09254R641L/p1751284317955159
## Problem
close LKB-199
## Summary of changes
We always return the error as 500 to the cplane if a LSN lease request
fails. This cause issues for the cplane as they don't retry on 500. This
patch correctly passes through the error and assign the error code so
that cplane can know if it is a retryable error. (TODO: look at the
cplane code and learn the retry logic).
Note that this patch does not resolve LKB-253 -- we need to handle not
found error separately in the lsn lease path, like wait until the tenant
gets attached, or return 503 so that cplane can retry.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Change the unreliable storage wrapper to fail by probability when there
are more failure attempts left.
Co-authored-by: Yecheng Yang <carlton.yang@databricks.com>
## Problem
Test `test_branch_creation_before_gc` is flaky in the internal repo.
Pageserver sometimes lags behind write LSN. When we call GC it might not
reach the LSN we try to create the branch at yet.
## Summary of changes
- Wait till flush lsn on pageserver reaches the latest LSN before
calling GC.
