When endpoint is stopped in immediate mode and started again there is a
chance of old connection delivering some WAL to safekeepers after second
start checked need for sync-safekeepers and thus grabbed basebackup LSN.
It makes basebackup unusable, so compute panics. Avoid flakiness by
waiting for walreceivers on safekeepers to be gone in such cases. A
better way would be to bump term on safekeepers if sync-safekeepers is
skipped, but it needs more infrastructure.
ref https://github.com/neondatabase/neon/issues/9079
Found while searching for other issues in shared memory.
The bug should be benign, in that it over-allocates memory for this
struct, but doesn't allow for out-of-bounds writes.
Following #7656, `TenantConfOpt::TryFrom<toml_edit::Item>` appears to be
dead code. This patch removes `TenantConfOpt::TryFrom<toml_edit::Item>`.
The code does appear to be dead, since the TOML config is deserialized
into `TenantConfig` (via `LocationConfig`) and then converted into
`TenantConfOpt`.
This was verified by adding a panic to `try_from()` and running the
pageserver unit tests as well as a local end-to-end cluster (including
creating a new tenant and restarting the pageserver). This did not fail,
so this is not used on the common happy path at least. No explicit
`try_from` or `try_into` calls were found either.
Resolves#8918.
aux v2 migration is near the end and I rewrote the RFC based on what I
proposed (several months before...) and what I actually implemented.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
These are the perf counters added in commit 263dfba6ee.
Note: This relies on 'neon' extension version 1.5. The default was
bumped to 1.5 in commit d696c41807.
---------
Co-authored-by: Matthias van de Meent <matthias@neon.tech>
On bookworm, 'cmake' is new enough that we can just use it. On bullseye,
we can get a new-enough package from backports. By including 'cmake' in
the build-deps stage, we don't need to install it separately in all the
later build stages that need it.
See https://github.com/neondatabase/neon/pull/2699, where we switched to
downloading and building a specific version.
Microsoft exposes JWKs without the alg header. It's only included on the
tokens. Not a problem.
Also noticed that wrt the `typ` header:
> It will typically not be used by applications when it is already known
that the object is a JWT. This parameter is ignored by JWT
implementations; any processing of this parameter is performed by the
JWT application.
Since we know we are expecting JWTs only, I've followed the guidance and
removed the validation.
## Problem
We need the
[pg_session_jwt](https://github.com/neondatabase/pg_session_jwt/)
extension in the compute image. This PR adds it.
## Summary of changes
I added the `pg_session_jwt` extension in a very similar way to how the
pggraphql and pgtiktoken extensions were added (since they're all
written with pgrx). Then I tested this.
```
$ cd docker-compose/
$ PG_VERSION=16 TAG=10667533475 docker-compose up --build -d
$ psql postgresql://cloud_admin:cloud_admin@localhost:55433/postgres
cloud_admin@postgres=# create extension pg_session_jwt;
CREATE EXTENSION
Time: 43.048 ms
cloud_admin@postgres=# \df auth.*;
List of functions
┌────────┬──────────────────┬──────────────────┬─────────────────────┬──────┐
│ Schema │ Name │ Result data type │ Argument data types │ Type │
├────────┼──────────────────┼──────────────────┼─────────────────────┼──────┤
│ auth │ get │ jsonb │ s text │ func │
│ auth │ init │ void │ kid bigint, s jsonb │ func │
│ auth │ jwt_session_init │ void │ s text │ func │
│ auth │ user_id │ text │ │ func │
└────────┴──────────────────┴──────────────────┴─────────────────────┴──────┘
(4 rows)
cloud_admin@postgres=# select auth.init(cast('1' as bigint), to_jsonb(TEXT '{ "kty": "EC", "kid": "571683be-33cf-4e67-bccc-8905c0ebb862", "crv": "P-521", "alg": "ES512", "x": "AM_GsnQvKML2yXdn_OsN8PdgO1Sf9XMXih5vQMKLmJkp-Iz_FFWJUt6uyR_qp4brr8Ji2kjGJgN4cQJpg2kskH7V", "y": "AZg-salw24lCmsBP-BCBa5jT6INkTwLtCOC7o0BIxDVvmIEH1-PQAJVYVJPTFvPMi_PLa0QlOm-ufJYkynwa2Mau" }'));
ERROR: called `Result::unwrap()` on an `Err` value: Error("invalid type: string \"{ \\\"kty\\\": \\\"EC\\\", \\\"kid\\\": \\\"571683be-33cf-4e67-bccc-8905c0ebb862\\\", \\\"crv\\\": \\\"P-521\\\", \\\"alg\\\": \\\"ES512\\\", \\\"x\\\": \\\"AM_GsnQvKML2yXdn_OsN8PdgO1Sf9XMXih5vQMKLmJkp-Iz_FFWJUt6uyR_qp4brr8Ji2kjGJgN4cQJpg2kskH7V\\\", \\\"y\\\": \\\"AZg-salw24lCmsBP-BCBa5jT6INkTwLtCOC7o0BIxDVvmIEH1-PQAJVYVJPTFvPMi_PLa0QlOm-ufJYkynwa2Mau\\\" }\", expected struct JwkEcKey", line: 0, column: 0)
Time: 6.991 ms
```
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Move the download location to a proper URL
## Problem
`test_multi_attach` is sometimes failing with `invalid compute status
for configuration request: Configuration`. This is likely a result of
the test attempting to reconfigure the compute at the same time as the
storage controller is doing so.
This test was originally written before the storage controller existed,
and is not expecting anything else to be reconfiguring computes at the
same time.
## Summary of changes
- Configure the tenant into scheduling policy `Stop` in the storage
controller at the start of the test, so that it won't try to do anything
to the tenant while the test is running.
* tracing-utils now returns a `Layer` impl. Removes the need for crates
to
import OTel crates.
* Drop the /v1/traces URI check. Verified that the code does the right
thing.
* Leave a TODO to hook in an error handler for OTel to log errors to
when it
assumes the regular pipeline cannot be used/is broken.
## Problem
The live migration code waits forever for the compute notification hook,
on the basis that until it succeeds, the compute is probably using the
old location and we shouldn't detach it.
However, if a pageserver stops or restarts in the background, then this
original location might no longer be available, so there is no point
waiting. Waiting is also actively harmful, because it prevents other
reconciliations happening for the tenant shard, such as during an
upgrade where a stuck "drain" migration might prevent the later "fill"
migration from moving the shard back to its original location.
## Summary of changes
- Refactor the notification wait loop into a function
- Add a checks during the loop, for the origin node's cancellation token
and an explicit HTTP request to the origin node to confirm the shard is
still attached there.
Closes: https://github.com/neondatabase/neon/issues/8901
neon_cli.create_tenant() creates a new tenant *and* a timeline on the
tenant, with name "main". In most tests, there's no need to create
another timeline on the same tenant.
There are some more tests that do that, but in the remaining cases, I
wasn't be 100% if the presence of extra root timelines affect what the
tests test, so I left them alone.
## Problem
This test waits for a request to finish, and then expects deletion to
complete almost immediately. The request completes, but it's a 202, the
timeline is still deleting in the background: we need to be more
patient.
## Summary of changes
- Adjust iterations from 2 to 10 when waiting for deletion
## Problem
The Neon components, built locally and by the GitHub workflow have
slightly different version prefixes (git: vs git-env:)
This does not allow running tests against local builds correctly.
## Summary of changes
The regular expressions were changed to work with both
prefixes.
## Problem
Legacy functions that were called as `mgr::` and relied on the static
TENANTS, see #5796
## Summary of changes
- Move the last stray function (immediate_gc) into TenantManager
Closes: https://github.com/neondatabase/neon/issues/5796
Commit 263dfba6ee introduced neon extension version 1.5, which included
some new functions and views for metrics. It didn't bump the default
neon extension number yet, so that we could still safely roll back to
the old binary if necessary. This bumps the default version.
## Problem
`pgbench-pgvector` job from Nightly Benchmarks fails with the error:
```
/__w/_temp/f45bc2eb-4c4c-4f0a-8030-99079303fa65.sh: line 17: LD_LIBRARY_PATH: unbound variable
```
## Summary of changes
- Fix `LD_LIBRARY_PATH: unbound variable` error in benchmarks
## Problem
Nightly Benchmarks have been broken for some time due to various
reasons, this PR fixes it
## Summary of changes
- Pull `build-tools` image from dockerhub for `benchmarking` workflow
- Use `aws-actions/configure-aws-credentials` to upload/download
artifacts from S3
- Fix Postgres 16 installation (for pgbench)
Part of https://github.com/neondatabase/cloud/issues/13127. Resolves
#9153
What changed in this PR:
1. Adds `ComputeSpec.disk_quota_bytes: Option<u64>`
2. Adds new arg to compute_ctl: `--set-disk-quota-for-fs <mountpoint>`
3. Implements running `/neonvm/bin/set-disk-quota` with the right value
if both cmdline arg AND field in the spec are specified
4. Patches `/etc/sudoers.d` to allow `compute_ctl` to set quota with
sudo
This PR is very similar to the swap support added earlier, you can take
a look at it as prior art: #7434
In theory, it can be implemented outside of compute_ctl when we will
have a separate neonvm daemon, but we are not there yet. Current
implementation is the simplest possible to unblock computes with larger
disks.
All code related to usage of `/neonvm/bin/set-disk-quota` is located in
`disk_quota.rs`. We need to call this script with the following
arguments: `/neonvm/bin/set-disk-quota {size_kb} {mountpoint}`. Quotas
are set on the filesystem level, so we need to provide path to the
directory that filesystem was mounted to.
I tested this change locally with
https://github.com/neondatabase/cloud/pull/17270. It should be safe to
merge, because this feature is gated by both cmdline arg and field in
the spec. If control-plane doesn't set values in both places,
compute_ctl won't be affected by this change.
close https://github.com/neondatabase/neon/issues/8140
The original issue is rather vague on what we should do. After
discussion w/ @problame we decided to narrow down the problems we want
to solve in that issue.
* read path -- do not panic for now.
* write path -- panic only on write errors (i.e., device error, fsync
error), but not on no-space for now.
The guideline is that if the pageserver behavior could lead to violation
of persistent constraints (i.e., return an operation as successful but
not actually persisting things), we should panic. Fsync is the place
where both of us agree that we should panic, because if fsync fails, the
kernel will mark dirty pages as clean, and the next fsync will not
necessarily return false. This would make the storage client assume the
operation is successful.
## Summary of changes
Make fsync panic on fatal errors.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
To make it faster. On my laptop, it takes about 30 before this commit.
In the arm64 debug variant in CI, it takes about 120 s. Reduce it by
factor of 4.
Part of #8130
## Problem
After deploying https://github.com/neondatabase/infra/pull/1927, we
shipped `io_buffer_alignment=512` to all prod region. The
`AdjacentVectoredReadBuilder` code path is no longer taken and we are
running pageserver unit tests 6 times in the CI. Removing it would
reduce the test duration by 30-60s.
## Summary of changes
- Remove `AdjacentVectoredReadBuilder` code.
- Bump the minimum `io_buffer_alignment` requirement to at least 512
bytes.
- Use default `io_buffer_alignment` for Rust unit tests.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Part of #7497, closes#8817.
## Problem
See #8817.
## Summary of changes
**compute_ctl**
- Renew lsn lease as soon as `/configure` updates pageserver_connstr,
use `state_changed` Condvar for synchronization.
**pageserver**
As mentioned in
https://github.com/neondatabase/neon/issues/8817#issuecomment-2315768076,
we still want some permanent error reported if a lease cannot be
granted. By considering attachment mode and the added
`lsn_lease_deadline` when processing lease requests, we can also bound
the case of bad requests to a very short period after migration/restart.
- Refactor https://github.com/neondatabase/neon/pull/9024 and move
`lsn_lease_deadline` to `AttachedTenantConf` so timeline can easily
access it.
- Have separate HTTP `init_lsn_lease` and libpq `renew_lsn_lease` API.
- Always do LSN verification for the initial HTTP lease request.
- LSN verification for the renewal is **still done** when tenants are
not in `AttachedSingle` and we have pass the `lsn_lease_deadline`, which
give plenty of time for compute to renew the lease.
**neon_local**
- add and call `timeline_init_lsn_lease` mgmt_api at static endpoint
start. The initial lsn lease http request is sent when we run `cargo
neon endpoint start <static endpoint>`.
## Testing
- Extend `test_readonly_node_gc` to do pageserver restarts and
migration.
## Future Work
- The control plane should make the initial lease request through HTTP
when creating a static endpoint. This is currently only done in
`neon_local`.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Verbosity in this case is good when reading the code. Short options are
better when operating in an interactive shell.
Signed-off-by: Tristan Partin <tristan@neon.tech>
I hope this lets us capture backtraces in CI. At least it makes it
work on my laptop, which is valuable even if we need to do more for
CI.
See issue #2800.
## Problem
We get some unexpected errors, but don't know who they're happening for.
## Summary of change
Add tenant id and peer address to PG connection error logs.
Related https://github.com/neondatabase/cloud/issues/17336
We separated client error from basebackup error log lines in
https://github.com/neondatabase/neon/pull/7523, but we didn't do
anything for the metrics. In this patch, we fixed it.
ref https://github.com/neondatabase/neon/issues/8970
## Summary of changes
We use the same criteria as in `log_query_error` producing an info line
(instead of error) for the metrics. We added a `client_error` category
for the basebackup query time metrics.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
- In https://github.com/neondatabase/neon/pull/8784, the validate
controller API is modified to check generations directly in the
database. It batches tenants into separate queries to avoid generating a
huge statement, but
- While updating this, I realized that "control_plane_client" is a kind
of confusing name for the client code now that it primarily talks to the
storage controller (the case of talking to the control plane will go
away in a few months).
## Summary of changes
- Big rename to "ControllerUpcallClient" -- this reflects the storage
controller's api naming, where the paths used by the pageserver are in
`/upcall/`
- When sending validate requests, break them up into chunks so that we
avoid possible edge cases of generating any HTTP requests that require
database I/O across many thousands of tenants.
This PR mixes a functional change with a refactor, but the commits are
cleanly separated -- only the last commit is a functional change.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
There was a tricky race condition in compute_ctl, that sometimes makes
configurator skip updates. It makes a deadlock because:
- control-plane cannot configure compute, because it's in
ConfigurationPending state
- compute_ctl doesn't do any reconfiguration because
`configurator_main_loop` missed notification for it
Full sequence that reproduces the issue:
1. `start_compute` finishes works and changes status
`self.set_status(ComputeStatus::Running);`
2. configurator received update about `Running` state and dropped the
mutex lock in the iteration
3. `/configure` request was triggered at the same time as step 1, and
got the mutex lock
4. same `/configure` request set the spec and updated the state to
`ConfigurationPending`, also sent a notification
5. next iteration in configurator got the mutex lock, but missed the
notification
There are more details in this slack thread:
https://neondb.slack.com/archives/C03438W3FLZ/p1727281028478689?thread_ts=1727261220.483799&cid=C03438W3FLZ
---------
Co-authored-by: Alexey Kondratov <kondratov.aleksey@gmail.com>
## Problem
The latest storage release has generated artifacts for Postgres 17,
so we can enable compatibility tests this version
## Summary of changes
- Unskip `test_backward_compatibility` / `test_forward_compatibility` on
Postgres 17
We don't want to allow any new child timelines of archived timelines. If
you want any new child timelines, you should first un-archive the
timeline.
Part of #8088
The warning:
warning: first doc comment paragraph is too long
--> pageserver/src/tenant/checks.rs:7:1
|
7 | / /// Checks whether a layer map is valid (i.e., is a valid result
of the current compaction algorithm if no...
8 | | /// The function checks if we can split the LSN range of a delta
layer only at the LSNs of the delta layer...
9 | | ///
10 | | /// ```plain
| |_
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#too_long_first_doc_paragraph
= note: `#[warn(clippy::too_long_first_doc_paragraph)]` on by default
help: add an empty line
|
7 ~ /// Checks whether a layer map is valid (i.e., is a valid result of
the current compaction algorithm if nothing goes wrong).
8 + ///
|
Fix by applying the suggestion.
