## Problem
test_timeline_archival_chaos does timeline creation with failure
injection, and thereby sometimes leaves timelines in a part created
state. This was being reported as corruption by the scrubber on test
teardown, because it considered a layer without an index to be an
invalid state. This was incorrect: the scrubber should accept this
state, it occurs legitimately during timeline creation.
Closes: https://github.com/neondatabase/neon/issues/9988
## Summary of changes
- Report a timeline with layers but no index as Relic rather than
MissingIndexPart.
- We retain the MissingIndexPart variant for the case where an index
_was_ found in the listing, but was not found by a subsequent GET, i.e.
racing with deletion.
## Problem
`test_pgdata_import_smoke` writes two gigabytes of pages and then reads
them back serially. This is CPU bottlenecked and results in a long
runtime, and sensitivity to CPU load from other tests on the same
machine.
Closes: https://github.com/neondatabase/neon/issues/10071
## Summary of changes
- Use effective_io_concurrency=32 when doing sequential scans through
2GiB of pages in test_pgdata_import_smoke. This is a ~10x runtime
decrease in the parts of the test that do sequential scans.
- Also set `effective_io_concurrency=2` for tests, as I noticed while
debugging that we were doing all getpage requests serially, which is bad
for checking the stability of the batching code.
## Problem
We want to verify how much / if pgbench throughput and latency on Neon
suffers if the database contains many other relations, too.
## Summary of changes
Modify the benchmarking.yml pgbench-compare job to
- create an addiitional project at scale factor 10 GiB
- before running pgbench add n tables (initially 10k) to the database
- then compare the pgbench throughput and latency to the existing
pgbench-compare at 10 Gib scale factor
We use a realistic template for the n relations that is a partitioned
table with some realistic data types, indexes and constraints - similar
to a table that we use internally.
Example run:
https://github.com/neondatabase/neon/actions/runs/12377565956/job/34547386959
## Problem
s5cmd doesn't pick up the pod service account
```
2024/12/16 16:26:01 Ignoring, HTTP credential provider invalid endpoint host, "169.254.170.23", only loopback hosts are allowed. <nil>
ERROR "ls s3://neon-dev-bulk-import-us-east-2/import-pgdata/fast-import/v1/br-wandering-hall-w2xobawv": NoCredentialProviders: no valid providers in chain. Deprecated. For verbose messaging see aws.Config.CredentialsChainVerboseErrors
```
## Summary of changes
Switch to offical CLI.
## Testing
Tested the pre-merge image in staging, using `job_image` override in
project settings.
https://neondb.slack.com/archives/C033RQ5SPDH/p1734554944391949?thread_ts=1734368383.258759&cid=C033RQ5SPDH
## Future Work
Switch back to s5cmd once https://github.com/peak/s5cmd/pull/769 gets
merged.
## Refs
- fixes https://github.com/neondatabase/cloud/issues/21876
---------
Co-authored-by: Gleb Novikov <NanoBjorn@users.noreply.github.com>
## Problem
In https://github.com/neondatabase/neon/pull/8103 we changed the test
case to have more test coverage of gc_compaction. Now that we have
`test_gc_compaction_smoke`, we can revert this test case to serve its
original purpose and revert the parameter changes.
part of https://github.com/neondatabase/neon/issues/9114
## Summary of changes
* Revert pitr_interval from 60s to 10s.
* Assert the physical/logical size ratio in the benchmark.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
We cannot get the size of the compaction queue and access the info.
Part of #9114
## Summary of changes
* Add an API endpoint to get the compaction queue.
* gc_compaction test case now waits until the compaction finishes.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`neon_local` has always been unsafe to run concurrently with itself: it
uses simple text files for persistent state, and concurrent runs will
step on each other.
In some test environments we intentionally handle this with mutexes in
python land, but it's fragile to try and always remember to do that.
## Summary of changes
- Add a `flock` based mutex around the `main` function of neon_local,
using the repo directory as the file to lock
- Clean up an Option<> around control_plane_api, this is a drive-by
change because it was one of the fields that had a weird effect when
previous concurrent stuff stamped on it.
## Problem
part of https://github.com/neondatabase/neon/issues/9114
In https://github.com/neondatabase/neon/pull/10127 we fixed the race,
but we didn't add the errors to the allowlist.
## Summary of changes
* Allow repartition errors in the gc-compaction smoke test.
I think it might be worth to refactor the code to allow multiple threads
getting a copy of repartition status (i.e., using Rcu) in the future.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Add a `safekeepers` subcommand to `storcon_cli` that allows listing the
safekeepers.
```
$ curl -X POST --url http://localhost:1234/control/v1/safekeeper/42 --data \
'{"active":true, "id":42, "created_at":"2023-10-25T09:11:25Z", "updated_at":"2024-08-28T11:32:43Z","region_id":"neon_local","host":"localhost","port":5454,"http_port":0,"version":123,"availability_zone_id":"us-east-2b"}'
$ cargo run --bin storcon_cli -- --api http://localhost:1234 safekeepers
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.38s
Running `target/debug/storcon_cli --api 'http://localhost:1234' safekeepers`
+----+---------+-----------+------+-----------+------------+
| Id | Version | Host | Port | Http Port | AZ Id |
+==========================================================+
| 42 | 123 | localhost | 5454 | 0 | us-east-2b |
+----+---------+-----------+------+-----------+------------+
```
Also:
* Don't return the raw `SafekeeperPersistence` struct that contains the
raw database presentation, but instead a new
`SafekeeperDescribeResponse` struct.
* The `SafekeeperPersistence` struct leaves out the `active` field on
purpose because we want to deprecate it and replace it with a
`scheduling_policy` one.
Part of https://github.com/neondatabase/neon/issues/9981
## Problem
The allure report finishes with the error `HttpError: Resource not
accessible by integration` while running the `pg_regress` test against a
cloud staging project due to a lack of permissions.
## Summary of changes
The permissions are added.
## Problem
It is unreliable for the control plane to infer the AZ for computes from
where the tenant is currently attached, because if a tenant happens to
be in a degraded state or a release is ongoing while a compute starts,
then the tenant's attached AZ can be a different one to where it will
run long-term, and the control plane doesn't check back later to restart
the compute.
This can land in parallel with
https://github.com/neondatabase/neon/pull/9947
## Summary of changes
- Thread through the preferred AZ into the compute hook code via the
reconciler
- Include the preferred AZ in the body of compute hook notifications
## Problem
Jemalloc heap profiles aren't symbolized. This is inconvenient, and
doesn't work with Grafana Cloud Profiles.
Resolves#9964.
## Summary of changes
Symbolize the heap profiles in-process, and strip unnecessary cruft.
This uses about 100 MB additional memory to cache the DWARF information,
but I believe this is already the case with CPU profiles, which use the
same library for symbolization. With cached DWARF information, the
symbolization CPU overhead is negligible.
Example profiles:
*
[pageserver.pb.gz](https://github.com/user-attachments/files/18141395/pageserver.pb.gz)
*
[safekeeper.pb.gz](https://github.com/user-attachments/files/18141396/safekeeper.pb.gz)
Don't build tests in h3 and rdkit: ~15 min speedup.
Use Ninja as cmake generator where possible: ~10 min speedup.
Clean apt cache for smaller images: around 250mb size loss for
intermediate layers
## Problem
It was reported as `gauge`, but it's actually a `counter`.
Also add `_total` suffix as that's the convention for counters.
The corresponding flux-fleet PR:
https://github.com/neondatabase/flux-fleet/pull/386
## Problem
The ABS SDK's default behavior is to do no connection pooling, i.e. open
and close a fresh connection for each request. Under high request rates,
this can result in an accumulation of TCP connections in TIME_WAIT or
CLOSE_WAIT state, and in extreme cases exhaustion of client ports.
Related: https://github.com/neondatabase/cloud/issues/20971
## Summary of changes
- Add a configurable `conn_pool_size` parameter for Azure storage,
defaulting to zero (current behavior)
- Construct a custom reqwest client using this connection pool size.
## Problem
It's impossible to run docker compose with compute v17 due to `pg_anon`
extension which is not supported under PG17.
## Summary of changes
The auto-loading of `pg_anon` is disabled by default
## Problem
To debug issues with TLS connections there's no easy way to decrypt
packets unless a client has special support for logging the keys.
## Summary of changes
Add TLS session keys logging to proxy via `SSLKEYLOGFILE` env var gated
by flag.
As the title says, I updated the lint rules to no longer allow unwrap or
unimplemented.
Three special cases:
* Tests are allowed to use them
* std::sync::Mutex lock().unwrap() is common because it's usually
correct to continue panicking on poison
* `tokio::spawn_blocking(...).await.unwrap()` is common because it will
only error if the blocking fn panics, so continuing the panic is also
correct
I've introduced two extension traits to help with these last two, that
are a bit more explicit so they don't need an expect message every time.
## Problem
We've had similar test in test_logical_replication, but then removed it
because it wasn't needed to trigger LR related bug. Restarting at WAL
page boundary is still a useful test, so add it separately back.
## Summary of changes
Add the test.
## Problem
We want to use safekeeper http client in storage controller and
neon_local.
## Summary of changes
Extract it to separate crate. No functional changes.
## Problem
While reviewing #10152 I found it tricky to actually determine whether
the connection used `allow_self_signed_compute` or not.
I've tried to remove this setting in the past:
* https://github.com/neondatabase/neon/pull/7884
* https://github.com/neondatabase/neon/pull/7437
* https://github.com/neondatabase/cloud/pull/13702
But each time it seems it is used by e2e tests
## Summary of changes
The `node_info.allow_self_signed_computes` is always initialised to
false, and then sometimes inherits the proxy config value. There's no
need this needs to be in the node_info, so removing it and propagating
it via `TcpMechansim` is simpler.
## Problem
Changes in #9786 were functionally complete but missed some edges that
made testing less robust than it should have been:
- `is_key_disposable` didn't consider SLRU dir keys disposable
- Timeline `init_empty` was always creating SLRU dir keys on all shards
The result was that when we had a bug
(https://github.com/neondatabase/neon/pull/10080), it wasn't apparent in
tests, because one would only encounter the issue if running on a
long-lived timeline with enough compaction to drop the initially created
empty SLRU dir keys, _and_ some CLog truncation going on.
Closes: https://github.com/neondatabase/cloud/issues/21516
## Summary of changes
- Update is_key_global and init_empty to handle SLRU dir keys properly
-- the only functional impact is that we avoid writing some spurious
keys in shards >0, but this makes testing much more robust.
- Make `test_clog_truncate` explicitly use a sharded tenant
The net result is that if one reverts #10080, then tests fail (i.e. this
PR is a reproducer for the issue)
## Problem
In #8550, we made the flush loop wait for uploads after every layer.
This was to avoid unbounded buildup of uploads, and to reduce compaction
debt. However, the approach has several problems:
* It prevents upload parallelism.
* It prevents flush and upload pipelining.
* It slows down ingestion even when there is no need to backpressure.
* It does not directly backpressure WAL ingestion (only via
`disk_consistent_lsn`), and will build up in-memory layers.
* It does not directly backpressure based on compaction debt and read
amplification.
An alternative solution to these problems is proposed in #8390.
In the meanwhile, we revert the change to reduce the impact on ingest
throughput. This does reintroduce some risk of unbounded
upload/compaction buildup. Until
https://github.com/neondatabase/neon/issues/8390, this can be addressed
in other ways:
* Use `max_replication_apply_lag` (aka `remote_consistent_lsn`), which
will more directly limit upload debt.
* Shard the tenant, which will spread the flush/upload work across more
Pageservers and move the bottleneck to Safekeeper.
Touches #10095.
## Summary of changes
Remove waiting on the upload queue in the flush loop.
## Problem
When entry was dropped and password wasn't set, new entry
had uninitialized memory in controlplane adapter
Resolves: https://github.com/neondatabase/cloud/issues/14914
## Summary of changes
Initialize password in all cases, add tests.
Minor formatting for less indentation
## Problem
`benchmarking` job fails because `aws-oicd-role-arn` input is not set
## Summary of changes:
- Set `aws-oicd-role-arn` for `benchmarking job
- Always require `aws-oicd-role-arn` to be set
- Rename `aws_oicd_role_arn` to `aws-oicd-role-arn` for consistency
## Problem
close https://github.com/neondatabase/neon/issues/10124
gc-compaction split_gc_jobs is holding the repartition lock for too long
time.
## Summary of changes
* Ensure split_gc_compaction_jobs drops the repartition lock once it
finishes cloning the structures.
* Update comments.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Improved comments will help others when they read the code, and the log
messages will help others understand why the logical replication monitor
works the way it does.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
LFC used_pages statistic is not updated in case of LFC resize (shrinking
`neon.file_cache_size_limit`)
## Summary of changes
Update `lfc_ctl->used_pages` in `lfc_change_limit_hook`
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The test was failing with the scary but generic message `Remote storage
metadata corrupted`.
The underlying scrubber error is `Orphan layer detected: ...`.
The test kills pageserver at random points, hence it's expected that we
leak layers if we're killed in the window after layer upload but before
it's referenced from index part.
Refer to generation numbers RFC for details.
Refs:
- fixes https://github.com/neondatabase/neon/issues/9988
- root-cause analysis
https://github.com/neondatabase/neon/issues/9988#issuecomment-2520673167
## Problem
`test_prefetch` is flaky
(https://github.com/neondatabase/neon/issues/9961), but if it passes,
the run time is less than 30 seconds — we don't need an extended timeout
for it.
## Summary of changes
- Remove extended test timeout for `test_prefetch`
## Problem
We want to extract safekeeper http client to separate crate for use in
storage controller and neon_local. However, many types used in the API
are internal to safekeeper.
## Summary of changes
Move them to safekeeper_api crate. No functional changes.
ref https://github.com/neondatabase/neon/issues/9011
## Problem
When moving the comment on proxy-releases from the yaml doc into a
javascript code block, I missed converting the comment marker from `#`
to `//`.
## Summary of changes
Correctly convert comment marker.
