## Problem
The heatmap upload period is configurable, but secondary mode downloads
were using a fixed download period.
Closes: #6200
## Summary of changes
- Use the upload period in the heatmap to adjust the download period.
In practice, this will reduce the frequency of downloads from its
current 60 second period to what heatmaps use, which is 5-10m depending
on environment.
This is an improvement rather than being optimal: we could be smarter
about periods, and schedule downloads to occur around the time we expect
the next upload, rather than just using the same period, but that's
something we can address in future if it comes up.
part of https://github.com/neondatabase/neon/issues/7462
## Summary of changes
This pull request adds two APIs to the pageserver management API:
list_aux_files and ingest_aux_files. The aux file pagebench is intended
to be used on an empty timeline because the data do not go through the
safekeeper. LSNs are advanced by 8 for each ingestion, to avoid
invariant checks inside the pageserver.
For now, I only care about space amplification / read amplification, so
the bench is designed in a very simple way: ingest 10000 files, and I
will manually dump the layer map to analyze.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Part of https://github.com/neondatabase/neon/issues/7462
## Summary of changes
Tenant config is not persisted unless it's attached on the storage
controller. In this pull request, we persist the aux file policy flag in
the `index_part.json`.
Admins can set `switch_aux_file_policy` in the storage controller or
using the page server API. Upon the first aux file gets written, the
write path will compare the aux file policy target with the current
policy. If it is switch-able, we will do the switch. Otherwise, the
original policy will be used. The test cases show what the admins can do
/ cannot do.
The `last_aux_file_policy` is stored in `IndexPart`. Updates to the
persisted policy are done via
`schedule_index_upload_for_aux_file_policy_update`. On the write path,
the writer will update the field.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
Currently tenants are only split into multiple shards if a human being
calls the API to do it.
Issue: #7388
## Summary of changes
- Add a pageserver API for returning the top tenants by size
- Add a step to the controller's background loop where if there is no
reconciliation or optimization to be done, it looks for things to split.
- Add a test that runs pgbench on many tenants concurrently, and checks
that splitting happens as expected as tenants grow, without interrupting
the client I/O.
This PR is quite basic: there is a tasklist in
https://github.com/neondatabase/neon/issues/7388 for further work. This
PR is meant to be safe (off by default), and sufficient to enable our
staging environment to run lots of sharded tenants without a human
having to set them up.
## Problem
- When a layer with legacy local path format is evicted and then
re-downloaded, a panic happened because the path downloaded by remote
storage didn't match the path stored in Layer.
- While investigating, I also realized that secondary locations would
have a similar issue with evictions.
Closes: #7783
## Summary of changes
- Make remote timeline client take local paths as an input: it should
not have its own ideas about local paths, instead it just uses the layer
path that the Layer has.
- Make secondary state store an explicit local path, populated on scan
of local disk at startup. This provides the same behavior as for Layer,
that our local_layer_path is a _default_, but the layer path can
actually be anything (e.g. an old style one).
- Add tests for both cases.
by having 100 copy operations in flight twe climb up to 2500 requests
per min or 41/s. This is still probably less than is allowed, but fast
enough for our purposes.
## Problem
This is tech debt from when shard splitting was implemented, to handle
more nicely the edge case of a client reconnect at the moment of the
split.
During shard splits, there were edge cases where we could incorrectly
return NotFound to a getpage@lsn request, prompting an unwanted
reconnect/backoff from the client.
It is already the case that parent shards during splits are marked
InProgress before child shards are created, so `resolve_attached_shard`
will not match on them, thereby implicitly preferring child shards
(good).
However, we were not doing any elegant handling of InProgress in
general: `get_active_tenant_with_timeout` was previously mostly dead
code: it was inspecting the slot found by `resolve_attached_shard` and
maybe waiting for InProgress, but that path is never taken because since
ef7c9c2ccc the resolve function only ever
returns attached slots.
Closes: https://github.com/neondatabase/neon/issues/7044
## Summary of changes
- Change return value of `resolve_attached_shard` to distinguish between
true NotFound case, and the case where we skipped slots that were
InProgress.
- Rework `get_active_tenant_with_timeout` to loop over calling
resolve_attached_shard, waiting if it sees an InProgress result.
The resulting behavior during a shard split is:
- If we look up a shard early in split when parent is InProgress but
children aren't created yet, we'll wait for the parent to be shut down.
This corresponds to the part of the split where we wait for LSNs to
catch up: so a small delay to the request, but a clean enough handling.
- If we look up a shard while child shards are already present, we will
match on those shards rather than the parent, as intended.
refs https://github.com/neondatabase/neon/issues/7753
This PR is step (1) of removing sync walredo from Pageserver.
Changes:
* Remove the sync impl
* If sync is configured, warn! and use async instead
* Remove the metric that exposes `kind`
* Remove the tenant status API that exposes `kind`
Future Work
-----------
After we've released this change to prod and are sure we won't
roll back, we will
1. update the prod Ansible to remove the config flag from the prod
pageserver.toml.
2. remove the remaining `kind` code in pageserver
These two changes need no release inbetween.
See https://github.com/neondatabase/neon/issues/7753 for details.
## Problem
This is historical baggage from when the pageserver could be run with
local disk only: we had a bunch of places where we had to treat remote
storage as optional.
Closes: https://github.com/neondatabase/neon/issues/6890
## Changes
- Remove Option<> around remote storage (in
https://github.com/neondatabase/neon/pull/7722 we made remote storage
clearly mandatory)
- Remove code for deleting old metadata files: they're all gone now.
- Remove other references to metadata files when loading directories, as
none exist.
I checked last 14 days of logs for "found legacy metadata", there are no
instances.
## Problem
Shards with number >0 could hang waiting for
`await_initial_logical_size`, as we don't calculate logical size on
these shards. This causes them to hold onto semaphore units and starve
other tenants out from proceeding with warmup activation.
That doesn't hurt availability (we still have on-demand activation), but
it does mean that some background tasks like consumption metrics would
omit some tenants.
## Summary of changes
- Skip waiting for logical size calculation on shards >0
- Upgrade unexpected code paths to use debug_assert!(), which acts as an
implicit regression test for this issue, and make the info() one into a
warn()
## Problem
Currently we do a large number of heatmap uploads for tiny tenants.
"tiny" in this context is defined as being less than a single layer in
size. These uploads are triggered by atime changes rather than changes
in the set of layers.
Uploading heatmaps for atime changes on small tenants isn't useful,
because even without bumping these atimes, disk usage eviction still
avoids evicting the largest resident layer of a tenant, which in
practice keeps tiny/empty tenants mostly resident irrespective of
atimes.
## Summary of changes
- For tenants smaller than one checkpoint interval, only upload heatmap
if the set of layers has changed, not if only the atimes have changed.
- Include the heatmap period in the uploaded heatmap, as a precursor to
implementing https://github.com/neondatabase/neon/issues/6200
(auto-adjusting download intervals to match upload intervals)
## Problem
Secondary downloads are a low priority task, and intentionally do not
try to max out download speeds. This is almost always fine when they are
used through the life of a tenant shard as a continuous "trickle" of
background downloads.
However, there are sometimes circumstances where we would like to
populate a secondary location as fast as we can, within the constraint
that we don't want to impact the activity of attached tenants:
- During node removal, where we will need to create replacements for
secondary locations on the node being removed
- After a shard split, we need new secondary locations for the new
shards to populate before the shards can be migrated to their final
location.
## Summary of changes
- Add an activity() function to the remote storage interface, enabling
callers to query how busy the remote storage backend is
- In the secondary download code, use a very modest amount of
concurrency, driven by the remote storage's state: we only use
concurrency if the remote storage semaphore is 75% free, and scale the
amount of concurrency used within that range.
This is not a super clever form of prioritization, but it should
accomplish the key goals:
- Enable secondary downloads to happen faster when the system is idle
- Make secondary downloads a much lower priority than attached tenants
when the remote storage is busy.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
In https://github.com/neondatabase/neon/pull/7531, I had a test flaky
because the GC API endpoint fails if the tenant happens not to be active
yet.
## Summary of changes
While adding that wait for the tenant to be active, I noticed that this
endpoint is kind of strange (spawns a TaskManager task) and has a
comment `// TODO: spawning is redundant now, need to hold the gate`, so
this PR cleans it up to just run the GC inline while holding a gate.
The GC code is updated to avoid assuming it runs inside a task manager
task. Avoiding checking the task_mgr cancellation token is safe, because
our timeline shutdown always cancels Timeline::cancel.
ref https://github.com/neondatabase/neon/issues/7443
## Summary of changes
This pull request adds a size estimator for aux files. Each timeline
stores a cached `isize` for the estimated total size of aux files. It
gets reset on basebackup, and gets updated for each aux file
modification. TODO: print a warning when it exceeds the size.
The size metrics is not accurate. Race between `on_basebackup` and other
functions could create a negative basebackup size, but the chance is
rare. Anyways, this does not impose any extra I/Os to the storage as
everything is computed in-memory.
The aux files are only stored on shard 0. As basebackups are only
generated on shard 0, only shard 0 will report this metrics.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
The background task loop permit metrics do two of `with_label_values`
very often. Change the codepath to cache the counters on first access
into a `Lazy` with `enum_map::EnumMap`. The expectation is that this
should not fix for metric collection failures under load, but it doesn't
hurt.
Cc: #7161
## Problem
Since https://github.com/neondatabase/neon/pull/6769, the pageserver is
intentionally not usable without remote storage: it's purpose is to act
as a cache to an object store, rather than as a source of truth in its
own right.
## Summary of changes
- Make remote storage configuration mandatory: the pageserver will
refuse to start if it is not provided.
This is a precursor that will make it safe to subsequently remove all
the internal Option<>s
The first implementation #7456 did not include `index_part.json` changes
in an attempt to keep amount of changes down. Tracks the historic
reparentings and earlier detach in `index_part.json`.
- `index_part.json` receives a new field `lineage: Lineage`
- `Lineage` is queried through RemoteTimelineClient during basebackup,
creating `PREV LSN: none` for the invalid prev record lsn just as it
would had been created for a newly created timeline
- as `struct IndexPart` grew, it is now boxed in places
Cc: #6994
We had accidentally left two endpoints for `tenant`: `/synthetic_size`
and `/size`. Size had the more extensive description but has returned
404 since renaming. Remove the `/size` in favor of the working one and
describe the `text/html` output.
## Problem
This caused a variation of the stats bug fixed by
https://github.com/neondatabase/neon/pull/7662. That PR also fixed this
case, but we still shouldn't make redundant get calls.
## Summary of changes
- Only call get in the create image layers loop at the end of a range if
some keys have been accumulated
For aux file keys (v1 or v2) the vectored read path does not return an
error when they're missing. Instead they are omitted from the resulting
btree (this is a requirement, not a bug). Skip updating the metric in
these cases to avoid infinite results.
- Rename "filename" types which no longer map directly to a filename
(LayerFileName -> LayerName)
- Add a -v1- part to local layer paths to smooth the path to future
updates (we anticipate a -v2- that uses checksums later)
- Rename methods that refer to the string-ized version of a LayerName to
no longer be called "filename"
- Refactor reconcile() function to use a LocalLayerFileMetadata type
that includes the local path, rather than carrying local path separately
in a tuple and unwrap()'ing it later.
## Problem
In https://github.com/neondatabase/neon/pull/7531, we would like to be
able to rewrite layers safely. One option is to make `Layer` able to
rewrite files in place safely (e.g. by blocking evictions/deletions for
an old Layer while a new one is created), but that's relatively fragile.
It's more robust in general if we simply never overwrite the same local
file: we can do that by putting the generation number in the filename.
## Summary of changes
- Add `local_layer_path` (counterpart to `remote_layer_path`) and
convert all locations that manually constructed a local layer path by
joining LayerFileName to timeline path
- In the layer upload path, construct remote paths with
`remote_layer_path` rather than trying to build them out of a local
path.
- During startup, carry the full path to layer files through
`init::reconcile`, and pass it into `Layer::for_resident`
- Add a test to make sure we handle upgrades properly.
- Comment out the generation part of `local_layer_path`, since we need
to maintain forward compatibility for one release. A tiny followup PR
will enable it afterwards.
We could make this a bit simpler if we bulk renamed existing layers on
startup instead of carrying literal paths through init, but that is
operationally risky on existing servers with millions of layer files. We
can always do a renaming change in future if it becomes annoying, but
for the moment it's kind of nice to have a structure that enables us to
change local path names again in future quite easily.
We should rename `LayerFileName` to `LayerName` or somesuch, to make it
more obvious that it's not a literal filename: this was already a bit
confusing where that type is used in remote paths. That will be a
followup, to avoid polluting this PR's diff.
This pull request adds the new basebackup read path + aux file write
path. In the regression test, all logical replication tests are run with
matrix aux_file_v2=false/true.
Also fixed the vectored get code path to correctly return missing key
error when being called from the unified sequential get code path.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
RemoteTimelineClient has a lot of mandatory cloning. By using a single
way of creating IndexPart out of UploadQueueInitialized we can simplify
things and also avoid cloning the latest files for each
`index_part.json` upload (the contents will still be cloned).
## Problem
Timelines cannot be deleted if they have children. In many production
cases, a branch or a timeline has been created off the main branch for
various reasons to the effect of having now a "new main" branch. This
feature will make it possible to detach a timeline from its ancestor by
inheriting all of the data before the branchpoint to the detached
timeline and by also reparenting all of the ancestor's earlier branches
to the detached timeline.
## Summary of changes
- Earlier added copy_lsn_prefix functionality is used
- RemoteTimelineClient learns to adopt layers by copying them from
another timeline
- LayerManager adds support for adding adopted layers
-
`timeline::Timeline::{prepare_to_detach,complete_detaching}_from_ancestor`
and `timeline::detach_ancestor` are added
- HTTP PUT handler
Cc: #6994
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
After a shard split of a large existing tenant, child tenants can end up
with oversized historic layers indefinitely, if those layers are
prevented from being GC'd by branchpoints.
This PR is followed by https://github.com/neondatabase/neon/pull/7531
Related issue: https://github.com/neondatabase/neon/issues/7504
## Summary of changes
- Add a new compaction phase `compact_shard_ancestors`, which identifies
layers that are no longer needed after a shard split.
- Add a Timeline->LayerMap code path called `rewrite_layers` , which is
currently only used to drop layers, but will later be used to rewrite
them as well in https://github.com/neondatabase/neon/pull/7531
- Add a new test that compacts after a split, and checks that something
is deleted.
Note that this doesn't have much impact on a tenant's resident size
(since unused layers would end up evicted anyway), but it:
- Makes index_part.json much smaller
- Makes the system easier to reason about: avoid having tenants which
are like "my physical size is 4TiB but don't worry I'll never actually
download it", instead have tenants report the real physical size of what
they might download.
Why do we remove these layers in compaction rather than during the
split? Because we have existing split tenants that need cleaning up. We
can add it to the split operation in future as an optimization.
## Problem
The current `tenant_slots` metric becomes less useful once we have lots
of secondaries, because we can't tell how many tenants are really
attached (without doing a sum() on some other metric).
## Summary of changes
- Add a `mode` label to this metric
- Update the metric with `slot_added` and `slot_removed` helpers that
are called at all the places we mutate the tenants map.
- Add a debug assertion at shutdown that checks the metrics add up to
the right number, as a cheap way of validating that we're calling the
metric hooks in all the right places.
## Problem
In testing of the earlier fix for OOMs under heavy write load
(https://github.com/neondatabase/neon/pull/7218), we saw that the limit
on ephemeral layer size wasn't being reliably enforced. That was
diagnosed as being due to overwhelmed compaction loops: most tenants
were waiting on the semaphore for background tasks, and thereby not
running the function that proactively rolls layers frequently enough.
Related: https://github.com/neondatabase/neon/issues/6939
## Summary of changes
- Create a new per-tenant background loop for "ingest housekeeping",
which invokes maybe_freeze_ephemeral_layer() without taking the
background task semaphore.
- Downgrade to DEBUG a log line in maybe_freeze_ephemeral_layer that had
been INFO, but turns out to be pretty common in the field.
There's some discussion on the issue
(https://github.com/neondatabase/neon/issues/6939#issuecomment-2083554275)
about alternatives for calling this maybe_freeze_epemeral_layer
periodically without it getting stuck behind compaction. A whole task
just for this feels like kind of a big hammer, but we may in future find
that there are other pieces of lightweight housekeeping that we want to
do here too.
Why is it okay to call maybe_freeze_ephemeral_layer outside of the
background tasks semaphore?
- this is the same work we would do anyway if we receive writes from the
safekeeper, just done a bit sooner.
- The period of the new task is generously jittered (+/- 5%), so when
the ephemeral layer size tips over the threshold, we shouldn't see an
excessively aggressive thundering herd of layer freezes (and only layers
larger than the mean layer size will be frozen)
- All that said, this is an imperfect approach that relies on having a
generous amount of RAM to dip into when we need to freeze somewhat
urgently. It would be nice in future to also block compaction/GC when we
recognize resource stress and need to do other work (like layer
freezing) to reduce memory footprint.
This is the first step towards representing all of Pageserver
configuration as clean `serde::Serialize`able Rust structs in
`pageserver_api`.
The `neon_local` code will then use those structs instead of the crude
`toml_edit` / string concatenation that it does today.
refs https://github.com/neondatabase/neon/issues/7555
---------
Co-authored-by: Alex Chi Z <iskyzh@gmail.com>
This pull request adds the scan interface. Scan operates on a sparse
keyspace and retrieves all the key-value pairs from the keyspaces.
Currently, scan only supports the metadata keyspace, and by default do
not retrieve anything from the ancestor branch. This should be fixed in
the future if we need to have some keyspaces that inherits from the
parent.
The scan interface reuses the vectored get code path by disabling the
missing key errors.
This pull request also changes the behavior of vectored get on aux file
v1/v2 key/keyspace: if the key is not found, it is simply not included in the
result, instead of throwing a missing key error.
TODOs in future pull requests: limit memory consumption, ensure the
search stops when all keys are covered by the image layer, remove
`#[allow(dead_code)]` once the code path is used in basebackups / aux
files, remove unnecessary fine-grained keyspace tracking in vectored get
(or have another code path for scan) to improve performance.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The logic in Service::optimize_all would sometimes choose to migrate a
tenant to a secondary location that was only recently created, resulting
in Reconciler::live_migrate hitting its 5 minute timeout warming up the
location, and proceeding to attach a tenant to a location that doesn't
have a warm enough local set of layer files for good performance.
Closes: #7532
## Summary of changes
- Add a pageserver API for checking download progress of a secondary
location
- During `optimize_all`, connect to pageservers of candidate
optimization secondary locations, and check they are warm.
- During shard split, do heatmap uploads and start secondary downloads,
so that the new shards' secondary locations start downloading ASAP,
rather than waiting minutes for background downloads to kick in.
I have intentionally not implemented this by continuously reading the
status of locations, to avoid dealing with the scale challenge of
efficiently polling & updating 10k-100k locations status. If we
implement that in the future, then this code can be simplified to act
based on latest state of a location rather than fetching it inline
during optimize_all.
We keep the practice of keeping the compiler up to date, pointing to the
latest release. This is done by many other projects in the Rust
ecosystem as well.
Release notes: https://blog.rust-lang.org/2024/05/02/Rust-1.78.0.html
Prior update was in #7198
## Problem
After some time the load from heatmap uploads gets rather spiky. They're
unintentionally synchronising.
Chart (does this make a _boing_ sound in anyone else's head?):
## Summary of changes
- Add a helper `period_jitter` and apply a 5% jitter from downloader and
heatmap_uploader when updating the next runtime at the end of an
interation.
- Refactor existing places that we pick a startup interval into
`period_warmup`, so that the intent is obvious.
The current implementation of finding timeline gc cutoff Lsn(s) is done
while holding `Tenant::gc_cs`. In recent incidents long create branch
times were caused by holding the `Tenant::gc_cs` over extremely long
`Timeline::find_lsn_by_timestamp`. The fix is to find the GC cutoff
values before taking the `Tenant::gc_cs` lock. This change is safe to do
because the GC cutoff values and the branch points have no dependencies
on each other. In the case of `Timeline::find_gc_cutoff` taking a long
time with this change, we should no longer see `Tenant::gc_cs`
interfering with branch creation.
Additionally, the `Tenant::refresh_gc_info` is now tolerant of timeline
deletions (or any other failures to find the pitr_cutoff). This helps
with the synthetic size calculation being constantly completed instead
of having a break for a timely timeline deletion.
Fixes: #7560Fixes: #7587
Split `GcInfo` and replace `Timeline::update_gc_info` with a method that
simply finds gc cutoffs `Timeline::find_gc_cutoffs` to be combined as
`Timeline::gc_info` at the caller.
This change will be followed up with a change that finds the GC cutoff
values before taking the `Tenant::gc_cs` lock.
Cc: #7560
Some part of the code requires missing key error to be propagated to the
code path correctly (i.e., aux key range scan). Currently, it's an
anyhow error.
* remove `stuck_lsn` from the missing key error.
* as a result, when matching missing key, we do not distinguish the case
`stuck_lsn = false/true`.
* vectored get now use the unified missing key error.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Instead of showing the full path of layer traversal, we now only show
tenant (in tracing context)+timeline+filename.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
We had an incident where pageserver requests timed out because
pageserver couldn't fetch WAL from safekeepers. This incident was caused
by a bug in safekeeper logic for timeline activation, which prevented
pageserver from finding safekeepers.
This bug was since fixed, but there is still a chance of a similar bug
in the future due to overall complexity.
We add a new broker message to "signal interest" for timeline. This
signal will be sent by pageservers `wait_lsn`, and safekeepers will
receive this signal to start broadcasting broker messages. Then every
broker subscriber will be able to find the safekeepers and connect to
them (to start fetching WAL).
This feature is not limited to pageservers and any service that wants to
download WAL from safekeepers will be able to use this discovery
request.
This commit changes pageserver's connection_manager (walreceiver) to
send a SafekeeperDiscoveryRequest when there is no information about
safekeepers present in memory. Current implementation will send these
requests only if there is an active wait_lsn() call and no more often
than once per 10 seconds.
Add `test_broker_discovery` to test this: safekeepers started with
`--disable-periodic-broker-push` will not push info to broker so that
pageserver must use a discovery to start fetching WAL.
Add task_stats in safekeepers broker module to log a warning if there is
no message received from the broker for the last 10 seconds.
Closes#5471
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
