Merge pull request #5638 from neondatabase/releases/2023-10-24

Release 2023-10-24

.cargo/config.toml

@@ -1,3 +1,17 @@
+# The binaries are really slow, if you compile them in 'dev' mode with the defaults.
+# Enable some optimizations even in 'dev' mode, to make tests faster. The basic
+# optimizations enabled by "opt-level=1" don't affect debuggability too much.
+#
+# See https://www.reddit.com/r/rust/comments/gvrgca/this_is_a_neat_trick_for_getting_good_runtime/
+#
+[profile.dev.package."*"]
+# Set the default for dependencies in Development mode.
+opt-level = 3
+
+[profile.dev]
+# Turn on a small amount of optimization in Development mode.
+opt-level = 1
+
 [build]
 # This is only present for local builds, as it will be overridden
 # by the RUSTDOCFLAGS env var in CI.

.config/hakari.toml

@@ -22,11 +22,5 @@ platforms = [
     # "x86_64-pc-windows-msvc",
 ]
 
-[final-excludes]
-# vm_monitor benefits from the same Cargo.lock as the rest of our artifacts, but
-# it is built primarly in separate repo neondatabase/autoscaling and thus is excluded
-# from depending on workspace-hack because most of the dependencies are not used.
-workspace-members = ["vm_monitor"]
-
 # Write out exact versions rather than a semver range. (Defaults to false.)
 # exact-versions = true

.config/nextest.toml

@@ -1,2 +0,0 @@
-[profile.default]
-slow-timeout = { period = "20s", terminate-after = 3 }

.dockerignore

@@ -1,27 +1,27 @@
 *
 
-# Files
-!Cargo.lock
-!Cargo.toml
-!Makefile
 !rust-toolchain.toml
-!scripts/combine_control_files.py
-!scripts/ninstall.sh
-!vm-cgconfig.conf
+!Cargo.toml
+!Cargo.lock
+!Makefile
 
-# Directories
 !.cargo/
 !.config/
-!compute_tools/
 !control_plane/
+!compute_tools/
 !libs/
-!neon_local/
 !pageserver/
 !pgxn/
 !proxy/
-!s3_scrubber/
 !safekeeper/
+!s3_scrubber/
 !storage_broker/
 !trace/
-!vendor/postgres-*/
+!vendor/postgres-v14/
+!vendor/postgres-v15/
+!vendor/postgres-v16/
 !workspace_hack/
+!neon_local/
+!scripts/ninstall.sh
+!scripts/combine_control_files.py
+!vm-cgconfig.conf

.github/ISSUE_TEMPLATE/epic-template.md

@@ -16,10 +16,9 @@ assignees: ''
 
 ## Implementation ideas
 
+
 ## Tasks
-```[tasklist]
-- [ ] Example Task
-```
+- [ ]
 
 
 ## Other related tasks and Epics

.github/PULL_REQUEST_TEMPLATE/release-pr.md

@@ -3,7 +3,7 @@
 **NB: this PR must be merged only by 'Create a merge commit'!**
 
 ### Checklist when preparing for release
-- [ ] Read or refresh [the release flow guide](https://www.notion.so/neondatabase/Release-general-flow-61f2e39fd45d4d14a70c7749604bd70b)
+- [ ] Read or refresh [the release flow guide](https://github.com/neondatabase/cloud/wiki/Release:-general-flow)
 - [ ] Ask in the [cloud Slack channel](https://neondb.slack.com/archives/C033A2WE6BZ) that you are going to rollout the release. Any blockers?
 - [ ] Does this release contain any db migrations? Destructive ones? What is the rollback plan?
 

.github/actionlint.yml

@@ -1,14 +1,8 @@
 self-hosted-runner:
   labels:
-    - arm64
-    - dev
     - gen3
     - large
-    # Remove `macos-14` from the list after https://github.com/rhysd/actionlint/pull/392 is merged.
-    - macos-14
     - small
     - us-east-2
 config-variables:
-  - REMOTE_STORAGE_AZURE_CONTAINER
-  - REMOTE_STORAGE_AZURE_REGION
   - SLACK_UPCOMING_RELEASE_CHANNEL_ID

.github/actions/allure-report-generate/action.yml

@@ -39,7 +39,7 @@ runs:
         PR_NUMBER=$(jq --raw-output .pull_request.number "$GITHUB_EVENT_PATH" || true)
         if [ "${PR_NUMBER}" != "null" ]; then
           BRANCH_OR_PR=pr-${PR_NUMBER}
-        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ] || [ "${GITHUB_REF_NAME}" = "release-proxy" ]; then
+        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ]; then
           # Shortcut for special branches
           BRANCH_OR_PR=${GITHUB_REF_NAME}
         else
@@ -59,7 +59,7 @@ runs:
         BUCKET: neon-github-public-dev
 
     # TODO: We can replace with a special docker image with Java and Allure pre-installed
-    - uses: actions/setup-java@v4
+    - uses: actions/setup-java@v3
       with:
         distribution: 'temurin'
         java-version: '17'
@@ -76,8 +76,8 @@ runs:
           rm -f ${ALLURE_ZIP}
         fi
       env:
-        ALLURE_VERSION: 2.27.0
-        ALLURE_ZIP_SHA256: b071858fb2fa542c65d8f152c5c40d26267b2dfb74df1f1608a589ecca38e777
+        ALLURE_VERSION: 2.24.0
+        ALLURE_ZIP_SHA256: 60b1d6ce65d9ef24b23cf9c2c19fd736a123487c38e54759f1ed1a7a77353c90
 
     # Potentially we could have several running build for the same key (for example, for the main branch), so we use improvised lock for this
     - name: Acquire lock
@@ -179,11 +179,22 @@ runs:
           aws s3 rm "s3://${BUCKET}/${LOCK_FILE}"
         fi
 
-    - name: Cache poetry deps
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pypoetry/virtualenvs
-        key: v2-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
+    - name: Store Allure test stat in the DB
+      if: ${{ !cancelled() && inputs.store-test-results-into-db == 'true' }}
+      shell: bash -euxo pipefail {0}
+      env:
+        COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
+        REPORT_JSON_URL: ${{ steps.generate-report.outputs.report-json-url }}
+      run: |
+        export DATABASE_URL=${REGRESS_TEST_RESULT_CONNSTR}
+
+        ./scripts/pysync
+
+        poetry run python3 scripts/ingest_regress_test_result.py \
+          --revision ${COMMIT_SHA} \
+          --reference ${GITHUB_REF} \
+          --build-type unified \
+          --ingest ${WORKDIR}/report/data/suites.json
 
     - name: Store Allure test stat in the DB (new)
       if: ${{ !cancelled() && inputs.store-test-results-into-db == 'true' }}
@@ -192,10 +203,6 @@ runs:
         COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
         BASE_S3_URL: ${{ steps.generate-report.outputs.base-s3-url }}
       run: |
-        if [ ! -d "${WORKDIR}/report/data/test-cases" ]; then
-          exit 0
-        fi
-
         export DATABASE_URL=${REGRESS_TEST_RESULT_CONNSTR_NEW}
 
         ./scripts/pysync
@@ -215,7 +222,7 @@ runs:
           rm -rf ${WORKDIR}
         fi
 
-    - uses: actions/github-script@v7
+    - uses: actions/github-script@v6
       if: always()
       env:
         REPORT_URL: ${{ steps.generate-report.outputs.report-url }}

.github/actions/allure-report-store/action.yml

@@ -19,7 +19,7 @@ runs:
         PR_NUMBER=$(jq --raw-output .pull_request.number "$GITHUB_EVENT_PATH" || true)
         if [ "${PR_NUMBER}" != "null" ]; then
           BRANCH_OR_PR=pr-${PR_NUMBER}
-        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ] || [ "${GITHUB_REF_NAME}" = "release-proxy" ]; then
+        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ]; then
           # Shortcut for special branches
           BRANCH_OR_PR=${GITHUB_REF_NAME}
         else

.github/actions/run-python-test-set/action.yml

@@ -44,10 +44,6 @@ inputs:
     description: 'Postgres version to use for tests'
     required: false
     default: 'v14'
-  benchmark_durations:
-    description: 'benchmark durations JSON'
-    required: false
-    default: '{}'
 
 runs:
   using: "composite"
@@ -80,16 +76,17 @@ runs:
 
     - name: Checkout
       if: inputs.needs_postgres_source == 'true'
-      uses: actions/checkout@v4
+      uses: actions/checkout@v3
       with:
         submodules: true
         fetch-depth: 1
 
     - name: Cache poetry deps
-      uses: actions/cache@v4
+      id: cache_poetry
+      uses: actions/cache@v3
       with:
         path: ~/.cache/pypoetry/virtualenvs
-        key: v2-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
+        key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
 
     - name: Install Python deps
       shell: bash -euxo pipefail {0}
@@ -163,7 +160,7 @@ runs:
         # We use pytest-split plugin to run benchmarks in parallel on different CI runners
         if [ "${TEST_SELECTION}" = "test_runner/performance" ] && [ "${{ inputs.build_type }}" != "remote" ]; then
           mkdir -p $TEST_OUTPUT
-          echo '${{ inputs.benchmark_durations || '{}' }}' > $TEST_OUTPUT/benchmark_durations.json
+          poetry run ./scripts/benchmark_durations.py "${TEST_RESULT_CONNSTR}" --days 10 --output "$TEST_OUTPUT/benchmark_durations.json"
 
           EXTRA_PARAMS="--durations-path $TEST_OUTPUT/benchmark_durations.json $EXTRA_PARAMS"
         fi

.github/workflows/actionlint.yml

@@ -16,14 +16,7 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  check-permissions:
-    if: ${{ !contains(github.event.pull_request.labels.*.name, 'run-no-ci') }}
-    uses: ./.github/workflows/check-permissions.yml
-    with:
-      github-event-name: ${{ github.event_name}}
-
   actionlint:
-    needs: [ check-permissions ]
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4

.github/workflows/approved-for-ci-run.yml

@@ -64,7 +64,7 @@ jobs:
     steps:
       - run: gh pr --repo "${GITHUB_REPOSITORY}" edit "${PR_NUMBER}" --remove-label "approved-for-ci-run"
 
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v3
         with:
           ref: main
           token: ${{ secrets.CI_ACCESS_TOKEN }}
@@ -93,7 +93,6 @@ jobs:
                                                        --body-file "body.md" \
                                                        --head "${BRANCH}" \
                                                        --base "main" \
-                                                       --label "run-e2e-tests-in-draft" \
                                                        --draft
           fi
 

.github/workflows/benchmarking.yml

@@ -11,7 +11,7 @@ on:
     #          │ │ ┌───────────── day of the month (1 - 31)
     #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
     #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
-    - cron:   '0 3 * * *' # run once a day, timezone is utc
+    - cron:  '0 3 * * *' # run once a day, timezone is utc
 
   workflow_dispatch: # adds ability to run this manually
     inputs:
@@ -23,21 +23,6 @@ on:
         type: boolean
         description: 'Publish perf report. If not set, the report will be published only for the main branch'
         required: false
-      collect_olap_explain:
-        type: boolean
-        description: 'Collect EXPLAIN ANALYZE for OLAP queries. If not set, EXPLAIN ANALYZE will not be collected'
-        required: false
-        default: false
-      collect_pg_stat_statements:
-        type: boolean
-        description: 'Collect pg_stat_statements for OLAP queries. If not set, pg_stat_statements will not be collected'
-        required: false
-        default: false
-      run_AWS_RDS_AND_AURORA:
-        type: boolean
-        description: 'AWS-RDS and AWS-AURORA normally only run on Saturday. Set this to true to run them on every workflow_dispatch'
-        required: false
-        default: false
 
 defaults:
   run:
@@ -62,11 +47,11 @@ jobs:
 
     runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
@@ -128,8 +113,6 @@ jobs:
     # - neon-captest-reuse: Reusing existing project
     # - rds-aurora: Aurora Postgres Serverless v2 with autoscaling from 0.5 to 2 ACUs
     # - rds-postgres: RDS Postgres db.m5.large instance (2 vCPU, 8 GiB) with gp3 EBS storage
-    env:
-      RUN_AWS_RDS_AND_AURORA: ${{ github.event.inputs.run_AWS_RDS_AND_AURORA || 'false' }}
     runs-on: ubuntu-latest
     outputs:
       pgbench-compare-matrix: ${{ steps.pgbench-compare-matrix.outputs.matrix }}
@@ -169,7 +152,7 @@ jobs:
           ]
         }'
 
-        if [ "$(date +%A)" = "Saturday" ] || [ ${RUN_AWS_RDS_AND_AURORA} = "true" ]; then
+        if [ "$(date +%A)" = "Saturday" ]; then
           matrix=$(echo "$matrix" | jq '.include += [{ "platform": "rds-postgres" },
                                                    { "platform": "rds-aurora"   }]')
         fi
@@ -188,9 +171,9 @@ jobs:
           ]
         }'
 
-        if [ "$(date +%A)" = "Saturday" ] || [ ${RUN_AWS_RDS_AND_AURORA} = "true" ]; then
+        if [ "$(date +%A)" = "Saturday" ]; then
           matrix=$(echo "$matrix" | jq '.include += [{ "platform": "rds-postgres", "scale": "10" },
-                                                    { "platform": "rds-aurora",   "scale": "10" }]')
+                                                   { "platform": "rds-aurora",   "scale": "10" }]')
         fi
 
         echo "matrix=$(echo "$matrix" | jq --compact-output '.')" >> $GITHUB_OUTPUT
@@ -214,14 +197,14 @@ jobs:
 
     runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     # Increase timeout to 8h, default timeout is 6h
     timeout-minutes: 480
 
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
@@ -354,19 +337,17 @@ jobs:
       POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
       DEFAULT_PG_VERSION: 14
       TEST_OUTPUT: /tmp/test_output
-      TEST_OLAP_COLLECT_EXPLAIN: ${{ github.event.inputs.collect_olap_explain }}
-      TEST_OLAP_COLLECT_PG_STAT_STATEMENTS: ${{ github.event.inputs.collect_pg_stat_statements }}
       BUILD_TYPE: remote
       SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
       PLATFORM: ${{ matrix.platform }}
 
     runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
@@ -418,8 +399,6 @@ jobs:
       env:
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
         PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-        TEST_OLAP_COLLECT_EXPLAIN: ${{ github.event.inputs.collect_olap_explain || 'false' }}
-        TEST_OLAP_COLLECT_PG_STAT_STATEMENTS: ${{ github.event.inputs.collect_pg_stat_statements || 'false' }}
         BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
         TEST_OLAP_SCALE: 10
 
@@ -461,11 +440,11 @@ jobs:
 
     runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download
@@ -558,11 +537,11 @@ jobs:
 
     runs-on: [ self-hosted, us-east-2, x64 ]
     container:
-      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:pinned
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v3
 
     - name: Download Neon artifact
       uses: ./.github/actions/download

.github/workflows/build-build-tools-image.yml

@@ -1,105 +0,0 @@
-name: Build build-tools image
-
-on:
-  workflow_call:
-    inputs:
-      image-tag:
-        description: "build-tools image tag"
-        required: true
-        type: string
-    outputs:
-      image-tag:
-        description: "build-tools tag"
-        value: ${{ inputs.image-tag }}
-      image:
-        description: "build-tools image"
-        value: neondatabase/build-tools:${{ inputs.image-tag }}
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-concurrency:
-  group: build-build-tools-image-${{ inputs.image-tag }}
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-jobs:
-  check-image:
-    uses: ./.github/workflows/check-build-tools-image.yml
-
-  # This job uses older version of GitHub Actions because it's run on gen2 runners, which don't support node 20 (for newer versions)
-  build-image:
-    needs: [ check-image ]
-    if: needs.check-image.outputs.found == 'false'
-
-    strategy:
-      matrix:
-        arch: [ x64, arm64 ]
-
-    runs-on: ${{ fromJson(format('["self-hosted", "dev", "{0}"]', matrix.arch)) }}
-
-    env:
-      IMAGE_TAG: ${{ inputs.image-tag }}
-
-    steps:
-      - name: Check `input.tag` is correct
-        env:
-          INPUTS_IMAGE_TAG: ${{ inputs.image-tag }}
-          CHECK_IMAGE_TAG : ${{ needs.check-image.outputs.image-tag }}
-        run: |
-          if [ "${INPUTS_IMAGE_TAG}" != "${CHECK_IMAGE_TAG}" ]; then
-            echo "'inputs.image-tag' (${INPUTS_IMAGE_TAG}) does not match the tag of the latest build-tools image 'inputs.image-tag' (${CHECK_IMAGE_TAG})"
-            exit 1
-          fi
-
-      - uses: actions/checkout@v3
-
-      # Use custom DOCKER_CONFIG directory to avoid conflicts with default settings
-      # The default value is ~/.docker
-      - name: Set custom docker config directory
-        run: |
-          mkdir -p /tmp/.docker-custom
-          echo DOCKER_CONFIG=/tmp/.docker-custom >> $GITHUB_ENV
-
-      - uses: docker/setup-buildx-action@v2
-
-      - uses: docker/login-action@v2
-        with:
-          username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-          password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-
-      - uses: docker/build-push-action@v4
-        with:
-          context: .
-          provenance: false
-          push: true
-          pull: true
-          file: Dockerfile.build-tools
-          cache-from: type=registry,ref=neondatabase/build-tools:cache-${{ matrix.arch }}
-          cache-to: type=registry,ref=neondatabase/build-tools:cache-${{ matrix.arch }},mode=max
-          tags: neondatabase/build-tools:${{ inputs.image-tag }}-${{ matrix.arch }}
-
-      - name: Remove custom docker config directory
-        run: |
-          rm -rf /tmp/.docker-custom
-
-  merge-images:
-    needs: [ build-image ]
-    runs-on: ubuntu-latest
-
-    env:
-      IMAGE_TAG: ${{ inputs.image-tag }}
-
-    steps:
-      - uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-          password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-
-      - name: Create multi-arch image
-        run: |
-          docker buildx imagetools create -t neondatabase/build-tools:${IMAGE_TAG} \
-                                             neondatabase/build-tools:${IMAGE_TAG}-x64 \
-                                             neondatabase/build-tools:${IMAGE_TAG}-arm64

.github/workflows/build_and_test.yml

@@ -5,7 +5,6 @@ on:
     branches:
       - main
       - release
-      - release-proxy
   pull_request:
 
 defaults:
@@ -22,29 +21,29 @@ env:
   COPT: '-Werror'
   AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
   AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-  # A concurrency group that we use for e2e-tests runs, matches `concurrency.group` above with `github.repository` as a prefix
-  E2E_CONCURRENCY_GROUP: ${{ github.repository }}-e2e-tests-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
 
 jobs:
   check-permissions:
-    if: ${{ !contains(github.event.pull_request.labels.*.name, 'run-no-ci') }}
-    uses: ./.github/workflows/check-permissions.yml
-    with:
-      github-event-name: ${{ github.event_name}}
-
-  cancel-previous-e2e-tests:
-    needs: [ check-permissions ]
-    if: github.event_name == 'pull_request'
     runs-on: ubuntu-latest
 
     steps:
-      - name: Cancel previous e2e-tests runs for this PR
-        env:
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          gh workflow --repo neondatabase/cloud \
-            run cancel-previous-in-concurrency-group.yml \
-              --field concurrency_group="${{ env.E2E_CONCURRENCY_GROUP }}"
+    - name: Disallow PRs from forks
+      if: |
+        github.event_name == 'pull_request' &&
+        github.event.pull_request.head.repo.full_name != github.repository
+
+      run: |
+        if [ "${{ contains(fromJSON('["OWNER", "MEMBER", "COLLABORATOR"]'), github.event.pull_request.author_association) }}" = "true" ]; then
+          MESSAGE="Please create a PR from a branch of ${GITHUB_REPOSITORY} instead of a fork"
+        else
+          MESSAGE="The PR should be reviewed and labelled with 'approved-for-ci-run' to trigger a CI run"
+        fi
+
+        echo >&2 "We don't run CI for PRs from forks"
+        echo >&2 "${MESSAGE}"
+
+        exit 1
+
 
   tag:
     needs: [ check-permissions ]
@@ -55,7 +54,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           fetch-depth: 0
 
@@ -68,8 +67,6 @@ jobs:
             echo "tag=$(git rev-list --count HEAD)" >> $GITHUB_OUTPUT
           elif [[ "$GITHUB_REF_NAME" == "release" ]]; then
             echo "tag=release-$(git rev-list --count HEAD)" >> $GITHUB_OUTPUT
-          elif [[ "$GITHUB_REF_NAME" == "release-proxy" ]]; then
-            echo "tag=release-proxy-$(git rev-list --count HEAD)" >> $GITHUB_OUTPUT
           else
             echo "GITHUB_REF_NAME (value '$GITHUB_REF_NAME') is not set to either 'main' or 'release'"
             echo "tag=$GITHUB_RUN_ID" >> $GITHUB_OUTPUT
@@ -77,65 +74,49 @@ jobs:
         shell: bash
         id: build-tag
 
-  check-build-tools-image:
-    needs: [ check-permissions ]
-    uses: ./.github/workflows/check-build-tools-image.yml
-
-  build-build-tools-image:
-    needs: [ check-build-tools-image ]
-    uses: ./.github/workflows/build-build-tools-image.yml
-    with:
-      image-tag: ${{ needs.check-build-tools-image.outputs.image-tag }}
-    secrets: inherit
-
   check-codestyle-python:
-    needs: [ check-permissions, build-build-tools-image ]
+    needs: [ check-permissions ]
     runs-on: [ self-hosted, gen3, small ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           submodules: false
           fetch-depth: 1
 
       - name: Cache poetry deps
-        uses: actions/cache@v4
+        id: cache_poetry
+        uses: actions/cache@v3
         with:
           path: ~/.cache/pypoetry/virtualenvs
-          key: v2-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
+          key: v1-codestyle-python-deps-${{ hashFiles('poetry.lock') }}
 
       - name: Install Python deps
         run: ./scripts/pysync
 
-      - name: Run `ruff check` to ensure code format
-        run: poetry run ruff check .
+      - name: Run ruff to ensure code format
+        run: poetry run ruff .
 
-      - name: Run `ruff format` to ensure code format
-        run: poetry run ruff format --check .
+      - name: Run black to ensure code format
+        run: poetry run black --diff --check .
 
       - name: Run mypy to check types
         run: poetry run mypy .
 
   check-codestyle-rust:
-    needs: [ check-permissions, build-build-tools-image ]
-    runs-on: [ self-hosted, gen3, small ]
+    needs: [ check-permissions ]
+    runs-on: [ self-hosted, gen3, large ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           submodules: true
           fetch-depth: 1
@@ -143,7 +124,7 @@ jobs:
 #      Disabled for now
 #      - name: Restore cargo deps cache
 #        id: cache_cargo
-#        uses: actions/cache@v4
+#        uses: actions/cache@v3
 #        with:
 #          path: |
 #            !~/.cargo/registry/src
@@ -191,21 +172,14 @@ jobs:
       # https://github.com/EmbarkStudios/cargo-deny
       - name: Check rust licenses/bans/advisories/sources
         if: ${{ !cancelled() }}
-        run: cargo deny check --hide-inclusion-graph
+        run: cargo deny check
 
   build-neon:
-    needs: [ check-permissions, tag, build-build-tools-image ]
+    needs: [ check-permissions ]
     runs-on: [ self-hosted, gen3, large ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      # Raise locked memory limit for tokio-epoll-uring.
-      # On 5.10 LTS kernels < 5.10.162 (and generally mainline kernels < 5.12),
-      # io_uring will account the memory of the CQ and SQ as locked.
-      # More details: https://github.com/neondatabase/neon/issues/6373#issuecomment-1905814391
-      options: --init --shm-size=512mb --ulimit memlock=67108864:67108864
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      options: --init
     strategy:
       fail-fast: false
       matrix:
@@ -213,7 +187,6 @@ jobs:
     env:
       BUILD_TYPE: ${{ matrix.build_type }}
       GIT_VERSION: ${{ github.event.pull_request.head.sha || github.sha }}
-      BUILD_TAG: ${{ needs.tag.outputs.build-tag }}
 
     steps:
       - name: Fix git ownership
@@ -225,13 +198,9 @@ jobs:
           #
           git config --global --add safe.directory ${{ github.workspace }}
           git config --global --add safe.directory ${GITHUB_WORKSPACE}
-          for r in 14 15 16; do
-            git config --global --add safe.directory "${{ github.workspace }}/vendor/postgres-v$r"
-            git config --global --add safe.directory "${GITHUB_WORKSPACE}/vendor/postgres-v$r"
-          done
 
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           submodules: true
           fetch-depth: 1
@@ -253,7 +222,7 @@ jobs:
           done
 
           if [ "${FAILED}" = "true" ]; then
-            echo >&2 "Please update vendor/revisions.json if these changes are intentional"
+            echo >&2 "Please update vendors/revisions.json if these changes are intentional"
             exit 1
           fi
 
@@ -303,7 +272,7 @@ jobs:
       # compressed crates.
 #      - name: Cache cargo deps
 #        id: cache_cargo
-#        uses: actions/cache@v4
+#        uses: actions/cache@v3
 #        with:
 #          path: |
 #            ~/.cargo/registry/
@@ -317,21 +286,21 @@ jobs:
 
       - name: Cache postgres v14 build
         id: cache_pg_14
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: pg_install/v14
           key: v1-${{ runner.os }}-${{ matrix.build_type }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
 
       - name: Cache postgres v15 build
         id: cache_pg_15
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: pg_install/v15
           key: v1-${{ runner.os }}-${{ matrix.build_type }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
 
       - name: Cache postgres v16 build
         id: cache_pg_16
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: pg_install/v16
           key: v1-${{ runner.os }}-${{ matrix.build_type }}-pg-${{ steps.pg_v16_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
@@ -358,30 +327,16 @@ jobs:
         run: |
           ${cov_prefix} mold -run cargo build $CARGO_FLAGS $CARGO_FEATURES --bins --tests
 
-      - name: Run rust tests
-        env:
-          NEXTEST_RETRIES: 3
+      - name: Run cargo test
         run: |
-          for io_engine in std-fs tokio-epoll-uring ; do
-            NEON_PAGESERVER_UNIT_TEST_VIRTUAL_FILE_IOENGINE=$io_engine ${cov_prefix} cargo nextest run $CARGO_FLAGS $CARGO_FEATURES
-          done
+          ${cov_prefix} cargo test $CARGO_FLAGS $CARGO_FEATURES
 
           # Run separate tests for real S3
           export ENABLE_REAL_S3_REMOTE_STORAGE=nonempty
-          export REMOTE_STORAGE_S3_BUCKET=neon-github-ci-tests
+          export REMOTE_STORAGE_S3_BUCKET=neon-github-public-dev
           export REMOTE_STORAGE_S3_REGION=eu-central-1
           # Avoid `$CARGO_FEATURES` since there's no `testing` feature in the e2e tests now
-          ${cov_prefix} cargo nextest run $CARGO_FLAGS -E 'package(remote_storage)' -E 'test(test_real_s3)'
-
-          # Run separate tests for real Azure Blob Storage
-          # XXX: replace region with `eu-central-1`-like region
-          export ENABLE_REAL_AZURE_REMOTE_STORAGE=y
-          export AZURE_STORAGE_ACCOUNT="${{ secrets.AZURE_STORAGE_ACCOUNT_DEV }}"
-          export AZURE_STORAGE_ACCESS_KEY="${{ secrets.AZURE_STORAGE_ACCESS_KEY_DEV }}"
-          export REMOTE_STORAGE_AZURE_CONTAINER="${{ vars.REMOTE_STORAGE_AZURE_CONTAINER }}"
-          export REMOTE_STORAGE_AZURE_REGION="${{ vars.REMOTE_STORAGE_AZURE_REGION }}"
-          # Avoid `$CARGO_FEATURES` since there's no `testing` feature in the e2e tests now
-          ${cov_prefix} cargo nextest run $CARGO_FLAGS -E 'package(remote_storage)' -E 'test(test_real_azure)'
+          ${cov_prefix} cargo test $CARGO_FLAGS --package remote_storage --test test_real_s3
 
       - name: Install rust binaries
         run: |
@@ -438,15 +393,12 @@ jobs:
         uses: ./.github/actions/save-coverage-data
 
   regress-tests:
-    needs: [ check-permissions, build-neon, build-build-tools-image, tag ]
+    needs: [ check-permissions, build-neon ]
     runs-on: [ self-hosted, gen3, large ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      # for changed limits, see comments on `options:` earlier in this file
-      options: --init --shm-size=512mb --ulimit memlock=67108864:67108864
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      # Default shared memory is 64mb
+      options: --init --shm-size=512mb
     strategy:
       fail-fast: false
       matrix:
@@ -454,14 +406,13 @@ jobs:
         pg_version: [ v14, v15, v16 ]
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           submodules: true
           fetch-depth: 1
 
       - name: Pytest regression tests
         uses: ./.github/actions/run-python-test-set
-        timeout-minutes: 60
         with:
           build_type: ${{ matrix.build_type }}
           test_selection: regress
@@ -472,75 +423,29 @@ jobs:
           rerun_flaky: true
           pg_version: ${{ matrix.pg_version }}
         env:
-          TEST_RESULT_CONNSTR: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}
+          TEST_RESULT_CONNSTR: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR }}
           CHECK_ONDISK_DATA_COMPATIBILITY: nonempty
-          BUILD_TAG: ${{ needs.tag.outputs.build-tag }}
-          PAGESERVER_VIRTUAL_FILE_IO_ENGINE: tokio-epoll-uring
-          PAGESERVER_GET_VECTORED_IMPL: vectored
 
-      # Temporary disable this step until we figure out why it's so flaky
-      # Ref https://github.com/neondatabase/neon/issues/4540
       - name: Merge and upload coverage data
-        if: |
-          false &&
-          matrix.build_type == 'debug' && matrix.pg_version == 'v14'
+        if: matrix.build_type == 'debug' && matrix.pg_version == 'v14'
         uses: ./.github/actions/save-coverage-data
 
-  get-benchmarks-durations:
-    outputs:
-      json: ${{ steps.get-benchmark-durations.outputs.json }}
-    needs: [ check-permissions, build-build-tools-image ]
-    runs-on: [ self-hosted, gen3, small ]
-    container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      options: --init
-    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-benchmarks')
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Cache poetry deps
-        uses: actions/cache@v4
-        with:
-          path: ~/.cache/pypoetry/virtualenvs
-          key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
-
-      - name: Install Python deps
-        run: ./scripts/pysync
-
-      - name: get benchmark durations
-        id: get-benchmark-durations
-        env:
-          TEST_RESULT_CONNSTR: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}
-        run: |
-          poetry run ./scripts/benchmark_durations.py "${TEST_RESULT_CONNSTR}" \
-                                                      --days 10 \
-                                                      --output /tmp/benchmark_durations.json
-          echo "json=$(jq --compact-output '.' /tmp/benchmark_durations.json)" >> $GITHUB_OUTPUT
-
   benchmarks:
-    needs: [ check-permissions, build-neon, build-build-tools-image, get-benchmarks-durations ]
+    needs: [ check-permissions, build-neon ]
     runs-on: [ self-hosted, gen3, small ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      # for changed limits, see comments on `options:` earlier in this file
-      options: --init --shm-size=512mb --ulimit memlock=67108864:67108864
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      # Default shared memory is 64mb
+      options: --init --shm-size=512mb
     if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-benchmarks')
     strategy:
       fail-fast: false
       matrix:
-        # the amount of groups (N) should be reflected in `extra_params: --splits N ...`
-        pytest_split_group: [ 1, 2, 3, 4, 5 ]
+        pytest_split_group: [ 1, 2, 3, 4 ]
         build_type: [ release ]
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
 
       - name: Pytest benchmarks
         uses: ./.github/actions/run-python-test-set
@@ -549,30 +454,25 @@ jobs:
           test_selection: performance
           run_in_parallel: false
           save_perf_report: ${{ github.ref_name == 'main' }}
-          extra_params: --splits 5 --group ${{ matrix.pytest_split_group }}
-          benchmark_durations: ${{ needs.get-benchmarks-durations.outputs.json }}
+          extra_params: --splits ${{ strategy.job-total }} --group ${{ matrix.pytest_split_group }}
         env:
           VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
           PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-          TEST_RESULT_CONNSTR: "${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}"
-          PAGESERVER_VIRTUAL_FILE_IO_ENGINE: tokio-epoll-uring
+          TEST_RESULT_CONNSTR: "${{ secrets.REGRESS_TEST_RESULT_CONNSTR }}"
       # XXX: no coverage data handling here, since benchmarks are run on release builds,
       # while coverage is currently collected for the debug ones
 
   create-test-report:
-    needs: [ check-permissions, regress-tests, coverage-report, benchmarks, build-build-tools-image ]
+    needs: [ check-permissions, regress-tests, coverage-report, benchmarks ]
     if: ${{ !cancelled() && contains(fromJSON('["skipped", "success"]'), needs.check-permissions.result) }}
 
     runs-on: [ self-hosted, gen3, small ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v3
 
       - name: Create Allure report
         if: ${{ !cancelled() }}
@@ -581,9 +481,10 @@ jobs:
         with:
           store-test-results-into-db: true
         env:
+          REGRESS_TEST_RESULT_CONNSTR: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR }}
           REGRESS_TEST_RESULT_CONNSTR_NEW: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}
 
-      - uses: actions/github-script@v7
+      - uses: actions/github-script@v6
         if: ${{ !cancelled() }}
         with:
           # Retry script for 5XX server errors: https://github.com/actions/github-script#retries
@@ -609,13 +510,11 @@ jobs:
             })
 
   coverage-report:
-    needs: [ check-permissions, regress-tests, build-build-tools-image ]
+    needs: [ check-permissions, regress-tests ]
+
     runs-on: [ self-hosted, gen3, small ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
     strategy:
       fail-fast: false
@@ -626,7 +525,7 @@ jobs:
         coverage-json: ${{ steps.upload-coverage-report-new.outputs.summary-json }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           submodules: true
           fetch-depth: 0
@@ -661,17 +560,25 @@ jobs:
             --input-objects=/tmp/coverage/binaries.list \
             --format=lcov
 
+      - name: Upload coverage report
+        id: upload-coverage-report
+        env:
+          BUCKET: neon-github-public-dev
+          COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
+        run: |
+          aws s3 cp --only-show-errors --recursive /tmp/coverage/report s3://${BUCKET}/code-coverage/${COMMIT_SHA}
+
+          REPORT_URL=https://${BUCKET}.s3.amazonaws.com/code-coverage/${COMMIT_SHA}/index.html
+          echo "report-url=${REPORT_URL}" >> $GITHUB_OUTPUT
+
       - name: Build coverage report NEW
         id: upload-coverage-report-new
         env:
           BUCKET: neon-github-public-dev
-          # A differential coverage report is available only for PRs.
-          # (i.e. for pushes into main/release branches we have a regular coverage report)
           COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-          BASE_SHA: ${{ github.event.pull_request.base.sha || github.sha }}
         run: |
+          BASELINE="$(git merge-base HEAD origin/main)"
           CURRENT="${COMMIT_SHA}"
-          BASELINE="$(git merge-base $BASE_SHA $CURRENT)"
 
           cp /tmp/coverage/report/lcov.info ./${CURRENT}.info
 
@@ -695,13 +602,23 @@ jobs:
           REPORT_URL=https://${BUCKET}.s3.amazonaws.com/code-coverage/${COMMIT_SHA}/lcov/summary.json
           echo "summary-json=${REPORT_URL}" >> $GITHUB_OUTPUT
 
-      - uses: actions/github-script@v7
+      - uses: actions/github-script@v6
         env:
+          REPORT_URL: ${{ steps.upload-coverage-report.outputs.report-url }}
           REPORT_URL_NEW: ${{ steps.upload-coverage-report-new.outputs.report-url }}
           COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
         with:
           script: |
-            const { REPORT_URL_NEW, COMMIT_SHA } = process.env
+            const { REPORT_URL, REPORT_URL_NEW, COMMIT_SHA } = process.env
+
+            await github.rest.repos.createCommitStatus({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              sha: `${COMMIT_SHA}`,
+              state: 'success',
+              target_url: `${REPORT_URL}`,
+              context: 'Code coverage report',
+            })
 
             await github.rest.repos.createCommitStatus({
               owner: context.repo.owner,
@@ -713,146 +630,201 @@ jobs:
             })
 
   trigger-e2e-tests:
-    if: ${{ !github.event.pull_request.draft || contains( github.event.pull_request.labels.*.name, 'run-e2e-tests-in-draft') || github.ref_name == 'main' || github.ref_name == 'release' || github.ref_name == 'release-proxy' }}
     needs: [ check-permissions, promote-images, tag ]
-    uses: ./.github/workflows/trigger-e2e-tests.yml
-    secrets: inherit
+    runs-on: [ self-hosted, gen3, small ]
+    container:
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/base:pinned
+      options: --init
+    steps:
+      - name: Set PR's status to pending and request a remote CI test
+        run: |
+          # For pull requests, GH Actions set "github.sha" variable to point at a fake merge commit
+          # but we need to use a real sha of a latest commit in the PR's branch for the e2e job,
+          # to place a job run status update later.
+          COMMIT_SHA=${{ github.event.pull_request.head.sha }}
+          # For non-PR kinds of runs, the above will produce an empty variable, pick the original sha value for those
+          COMMIT_SHA=${COMMIT_SHA:-${{ github.sha }}}
+
+          REMOTE_REPO="${{ github.repository_owner }}/cloud"
+
+          curl -f -X POST \
+          https://api.github.com/repos/${{ github.repository }}/statuses/$COMMIT_SHA \
+          -H "Accept: application/vnd.github.v3+json" \
+          --user "${{ secrets.CI_ACCESS_TOKEN }}" \
+          --data \
+            "{
+              \"state\": \"pending\",
+              \"context\": \"neon-cloud-e2e\",
+              \"description\": \"[$REMOTE_REPO] Remote CI job is about to start\"
+            }"
+
+          curl -f -X POST \
+          https://api.github.com/repos/$REMOTE_REPO/actions/workflows/testing.yml/dispatches \
+          -H "Accept: application/vnd.github.v3+json" \
+          --user "${{ secrets.CI_ACCESS_TOKEN }}" \
+          --data \
+            "{
+              \"ref\": \"main\",
+              \"inputs\": {
+                \"ci_job_name\": \"neon-cloud-e2e\",
+                \"commit_hash\": \"$COMMIT_SHA\",
+                \"remote_repo\": \"${{ github.repository }}\",
+                \"storage_image_tag\": \"${{ needs.tag.outputs.build-tag }}\",
+                \"compute_image_tag\": \"${{ needs.tag.outputs.build-tag }}\"
+              }
+            }"
 
   neon-image:
-    needs: [ check-permissions, build-build-tools-image, tag ]
+    needs: [ check-permissions, tag ]
     runs-on: [ self-hosted, gen3, large ]
+    container: gcr.io/kaniko-project/executor:v1.9.2-debug
+    defaults:
+      run:
+        shell: sh -eu {0}
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v1 # v3 won't work with kaniko
         with:
           submodules: true
           fetch-depth: 0
 
-      # Use custom DOCKER_CONFIG directory to avoid conflicts with default settings
-      # The default value is ~/.docker
-      - name: Set custom docker config directory
+      - name: Configure ECR and Docker Hub login
         run: |
-          mkdir -p .docker-custom
-          echo DOCKER_CONFIG=$(pwd)/.docker-custom >> $GITHUB_ENV
-      - uses: docker/setup-buildx-action@v3
+          DOCKERHUB_AUTH=$(echo -n "${{ secrets.NEON_DOCKERHUB_USERNAME }}:${{ secrets.NEON_DOCKERHUB_PASSWORD }}" | base64)
+          echo "::add-mask::${DOCKERHUB_AUTH}"
 
-      - uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-          password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+          cat <<-EOF > /kaniko/.docker/config.json
+            {
+              "auths": {
+                "https://index.docker.io/v1/": {
+                  "auth": "${DOCKERHUB_AUTH}"
+                }
+              },
+              "credHelpers": {
+                "369495373322.dkr.ecr.eu-central-1.amazonaws.com": "ecr-login"
+              }
+            }
+          EOF
 
-      - uses: docker/login-action@v3
-        with:
-          registry: 369495373322.dkr.ecr.eu-central-1.amazonaws.com
-          username: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-          password: ${{ secrets.AWS_SECRET_KEY_DEV }}
+      - name: Kaniko build neon
+        run:
+          /kaniko/executor --reproducible --snapshot-mode=redo --skip-unused-stages --cache=true
+                           --cache-repo 369495373322.dkr.ecr.eu-central-1.amazonaws.com/cache
+                           --context .
+                           --build-arg GIT_VERSION=${{ github.event.pull_request.head.sha || github.sha }}
+                           --build-arg REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com
+                           --destination 369495373322.dkr.ecr.eu-central-1.amazonaws.com/neon:${{needs.tag.outputs.build-tag}}
+                           --destination neondatabase/neon:${{needs.tag.outputs.build-tag}}
 
-      - uses: docker/build-push-action@v5
-        with:
-          context: .
-          build-args: |
-            GIT_VERSION=${{ github.event.pull_request.head.sha || github.sha }}
-            BUILD_TAG=${{ needs.tag.outputs.build-tag }}
-            TAG=${{ needs.build-build-tools-image.outputs.image-tag }}
-          provenance: false
-          push: true
-          pull: true
-          file: Dockerfile
-          cache-from: type=registry,ref=neondatabase/neon:cache
-          cache-to: type=registry,ref=neondatabase/neon:cache,mode=max
-          tags: |
-            369495373322.dkr.ecr.eu-central-1.amazonaws.com/neon:${{needs.tag.outputs.build-tag}}
-            neondatabase/neon:${{needs.tag.outputs.build-tag}}
+      # Cleanup script fails otherwise - rm: cannot remove '/nvme/actions-runner/_work/_temp/_github_home/.ecr': Permission denied
+      - name: Cleanup ECR folder
+        run: rm -rf ~/.ecr
 
-      - name: Remove custom docker config directory
-        if: always()
+  compute-tools-image:
+    runs-on: [ self-hosted, gen3, large ]
+    needs: [ check-permissions, tag ]
+    container: gcr.io/kaniko-project/executor:v1.9.2-debug
+    defaults:
+      run:
+        shell: sh -eu {0}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v1 # v3 won't work with kaniko
+
+      - name: Configure ECR and Docker Hub login
         run: |
-          rm -rf .docker-custom
+          DOCKERHUB_AUTH=$(echo -n "${{ secrets.NEON_DOCKERHUB_USERNAME }}:${{ secrets.NEON_DOCKERHUB_PASSWORD }}" | base64)
+          echo "::add-mask::${DOCKERHUB_AUTH}"
+
+          cat <<-EOF > /kaniko/.docker/config.json
+            {
+              "auths": {
+                "https://index.docker.io/v1/": {
+                  "auth": "${DOCKERHUB_AUTH}"
+                }
+              },
+              "credHelpers": {
+                "369495373322.dkr.ecr.eu-central-1.amazonaws.com": "ecr-login"
+              }
+            }
+          EOF
+
+      - name: Kaniko build compute tools
+        run:
+          /kaniko/executor --reproducible --snapshot-mode=redo --skip-unused-stages --cache=true
+                           --cache-repo 369495373322.dkr.ecr.eu-central-1.amazonaws.com/cache
+                           --context .
+                           --build-arg GIT_VERSION=${{ github.event.pull_request.head.sha || github.sha }}
+                           --build-arg BUILD_TAG=${{needs.tag.outputs.build-tag}}
+                           --build-arg REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com
+                           --dockerfile Dockerfile.compute-tools
+                           --destination 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:${{needs.tag.outputs.build-tag}}
+                           --destination neondatabase/compute-tools:${{needs.tag.outputs.build-tag}}
+
+      # Cleanup script fails otherwise - rm: cannot remove '/nvme/actions-runner/_work/_temp/_github_home/.ecr': Permission denied
+      - name: Cleanup ECR folder
+        run: rm -rf ~/.ecr
 
   compute-node-image:
-    needs: [ check-permissions, build-build-tools-image, tag ]
+    needs: [ check-permissions, tag ]
     runs-on: [ self-hosted, gen3, large ]
-
+    container:
+      image: gcr.io/kaniko-project/executor:v1.9.2-debug
+      # Workaround for "Resolving download.osgeo.org (download.osgeo.org)... failed: Temporary failure in name resolution.""
+      # Should be prevented by https://github.com/neondatabase/neon/issues/4281
+      options: --add-host=download.osgeo.org:140.211.15.30
     strategy:
       fail-fast: false
       matrix:
         version: [ v14, v15, v16 ]
+    defaults:
+      run:
+        shell: sh -eu {0}
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v1 # v3 won't work with kaniko
         with:
           submodules: true
           fetch-depth: 0
 
-      # Use custom DOCKER_CONFIG directory to avoid conflicts with default settings
-      # The default value is ~/.docker
-      - name: Set custom docker config directory
+      - name: Configure ECR and Docker Hub login
         run: |
-          mkdir -p .docker-custom
-          echo DOCKER_CONFIG=$(pwd)/.docker-custom >> $GITHUB_ENV
-      - uses: docker/setup-buildx-action@v3
-        with:
-          # Disable parallelism for docker buildkit.
-          # As we already build everything with `make -j$(nproc)`, running it in additional level of parallelisam blows up the Runner.
-          config-inline: |
-            [worker.oci]
-              max-parallelism = 1
+          DOCKERHUB_AUTH=$(echo -n "${{ secrets.NEON_DOCKERHUB_USERNAME }}:${{ secrets.NEON_DOCKERHUB_PASSWORD }}" | base64)
+          echo "::add-mask::${DOCKERHUB_AUTH}"
 
-      - uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-          password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+          cat <<-EOF > /kaniko/.docker/config.json
+            {
+              "auths": {
+                "https://index.docker.io/v1/": {
+                  "auth": "${DOCKERHUB_AUTH}"
+                }
+              },
+              "credHelpers": {
+                "369495373322.dkr.ecr.eu-central-1.amazonaws.com": "ecr-login"
+              }
+            }
+          EOF
 
-      - uses: docker/login-action@v3
-        with:
-          registry: 369495373322.dkr.ecr.eu-central-1.amazonaws.com
-          username: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-          password: ${{ secrets.AWS_SECRET_KEY_DEV }}
+      - name: Kaniko build compute node with extensions
+        run:
+          /kaniko/executor --reproducible --snapshot-mode=redo --skip-unused-stages --cache=true
+                           --cache-repo 369495373322.dkr.ecr.eu-central-1.amazonaws.com/cache
+                           --context .
+                           --build-arg GIT_VERSION=${{ github.event.pull_request.head.sha || github.sha }}
+                           --build-arg PG_VERSION=${{ matrix.version }}
+                           --build-arg BUILD_TAG=${{needs.tag.outputs.build-tag}}
+                           --build-arg REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com
+                           --dockerfile Dockerfile.compute-node
+                           --destination 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
+                           --destination neondatabase/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
+                           --cleanup
 
-      - name: Build compute-node image
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          build-args: |
-            GIT_VERSION=${{ github.event.pull_request.head.sha || github.sha }}
-            PG_VERSION=${{ matrix.version }}
-            BUILD_TAG=${{ needs.tag.outputs.build-tag }}
-            TAG=${{ needs.build-build-tools-image.outputs.image-tag }}
-          provenance: false
-          push: true
-          pull: true
-          file: Dockerfile.compute-node
-          cache-from: type=registry,ref=neondatabase/compute-node-${{ matrix.version }}:cache
-          cache-to: type=registry,ref=neondatabase/compute-node-${{ matrix.version }}:cache,mode=max
-          tags: |
-            369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
-            neondatabase/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
-
-      - name: Build compute-tools image
-        # compute-tools are Postgres independent, so build it only once
-        if: ${{ matrix.version == 'v16' }}
-        uses: docker/build-push-action@v5
-        with:
-          target: compute-tools-image
-          context: .
-          build-args: |
-            GIT_VERSION=${{ github.event.pull_request.head.sha || github.sha }}
-            BUILD_TAG=${{ needs.tag.outputs.build-tag }}
-            TAG=${{ needs.build-build-tools-image.outputs.image-tag }}
-          provenance: false
-          push: true
-          pull: true
-          file: Dockerfile.compute-node
-          tags: |
-            369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:${{ needs.tag.outputs.build-tag }}
-            neondatabase/compute-tools:${{ needs.tag.outputs.build-tag }}
-
-      - name: Remove custom docker config directory
-        if: always()
-        run: |
-          rm -rf .docker-custom
+      # Cleanup script fails otherwise - rm: cannot remove '/nvme/actions-runner/_work/_temp/_github_home/.ecr': Permission denied
+      - name: Cleanup ECR folder
+        run: rm -rf ~/.ecr
 
   vm-compute-node-image:
     needs: [ check-permissions, tag, compute-node-image ]
@@ -865,7 +837,7 @@ jobs:
       run:
         shell: sh -eu {0}
     env:
-      VM_BUILDER_VERSION: v0.23.2
+      VM_BUILDER_VERSION: v0.18.1
 
     steps:
       - name: Checkout
@@ -887,7 +859,8 @@ jobs:
       - name: Build vm image
         run: |
           ./vm-builder \
-            -spec=vm-image-spec.yaml \
+            -enable-file-cache \
+            -cgroup-uid=postgres \
             -src=369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}} \
             -dst=369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
 
@@ -896,12 +869,12 @@ jobs:
           docker push 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-${{ matrix.version }}:${{needs.tag.outputs.build-tag}}
 
   test-images:
-    needs: [ check-permissions, tag, neon-image, compute-node-image ]
+    needs: [ check-permissions, tag, neon-image, compute-node-image, compute-tools-image ]
     runs-on: [ self-hosted, gen3, small ]
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           fetch-depth: 0
 
@@ -930,8 +903,7 @@ jobs:
           fi
 
       - name: Verify docker-compose example
-        timeout-minutes: 20
-        run: env TAG=${{needs.tag.outputs.build-tag}} ./docker-compose/docker_compose_test.sh
+        run: env REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com TAG=${{needs.tag.outputs.build-tag}} ./docker-compose/docker_compose_test.sh
 
       - name: Print logs and clean up
         if: always()
@@ -964,7 +936,9 @@ jobs:
           crane pull 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v16:${{needs.tag.outputs.build-tag}} vm-compute-node-v16
 
       - name: Add latest tag to images
-        if: github.ref_name == 'main' || github.ref_name == 'release' || github.ref_name == 'release-proxy'
+        if: |
+          (github.ref_name == 'main' || github.ref_name == 'release') &&
+           github.event_name != 'workflow_dispatch'
         run: |
           crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/neon:${{needs.tag.outputs.build-tag}} latest
           crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:${{needs.tag.outputs.build-tag}} latest
@@ -976,7 +950,9 @@ jobs:
           crane tag 369495373322.dkr.ecr.eu-central-1.amazonaws.com/vm-compute-node-v16:${{needs.tag.outputs.build-tag}} latest
 
       - name: Push images to production ECR
-        if: github.ref_name == 'main' || github.ref_name == 'release'|| github.ref_name == 'release-proxy'
+        if: |
+          (github.ref_name == 'main' || github.ref_name == 'release') &&
+           github.event_name != 'workflow_dispatch'
         run: |
           crane copy 369495373322.dkr.ecr.eu-central-1.amazonaws.com/neon:${{needs.tag.outputs.build-tag}} 093970136003.dkr.ecr.eu-central-1.amazonaws.com/neon:latest
           crane copy 369495373322.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:${{needs.tag.outputs.build-tag}} 093970136003.dkr.ecr.eu-central-1.amazonaws.com/compute-tools:latest
@@ -1000,7 +976,9 @@ jobs:
           crane push vm-compute-node-v16 neondatabase/vm-compute-node-v16:${{needs.tag.outputs.build-tag}}
 
       - name: Push latest tags to Docker Hub
-        if: github.ref_name == 'main' || github.ref_name == 'release'|| github.ref_name == 'release-proxy'
+        if: |
+          (github.ref_name == 'main' || github.ref_name == 'release') &&
+          github.event_name != 'workflow_dispatch'
         run: |
           crane tag neondatabase/neon:${{needs.tag.outputs.build-tag}} latest
           crane tag neondatabase/compute-tools:${{needs.tag.outputs.build-tag}} latest
@@ -1090,7 +1068,7 @@ jobs:
 
   deploy:
     needs: [ check-permissions, promote-images, tag, regress-tests, trigger-custom-extensions-build-and-wait ]
-    if: github.ref_name == 'main' || github.ref_name == 'release'|| github.ref_name == 'release-proxy'
+    if: ( github.ref_name == 'main' || github.ref_name == 'release' ) && github.event_name != 'workflow_dispatch'
 
     runs-on: [ self-hosted, gen3, small ]
     container: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/ansible:latest
@@ -1104,13 +1082,9 @@ jobs:
           #
           git config --global --add safe.directory ${{ github.workspace }}
           git config --global --add safe.directory ${GITHUB_WORKSPACE}
-          for r in 14 15 16; do
-            git config --global --add safe.directory "${{ github.workspace }}/vendor/postgres-v$r"
-            git config --global --add safe.directory "${GITHUB_WORKSPACE}/vendor/postgres-v$r"
-          done
 
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           submodules: false
           fetch-depth: 0
@@ -1121,49 +1095,19 @@ jobs:
         run: |
           if [[ "$GITHUB_REF_NAME" == "main" ]]; then
             gh workflow --repo neondatabase/aws run deploy-dev.yml --ref main -f branch=main -f dockerTag=${{needs.tag.outputs.build-tag}} -f deployPreprodRegion=false
+
+            # TODO: move deployPreprodRegion to release (`"$GITHUB_REF_NAME" == "release"` block), once Staging support different compute tag prefixes for different regions
+            gh workflow --repo neondatabase/aws run deploy-dev.yml --ref main -f branch=main -f dockerTag=${{needs.tag.outputs.build-tag}} -f deployPreprodRegion=true
           elif [[ "$GITHUB_REF_NAME" == "release" ]]; then
-            gh workflow --repo neondatabase/aws run deploy-dev.yml --ref main \
-              -f deployPgSniRouter=false \
-              -f deployProxy=false \
-              -f deployStorage=true \
-              -f deployStorageBroker=true \
-              -f deployStorageController=true \
-              -f branch=main \
-              -f dockerTag=${{needs.tag.outputs.build-tag}} \
-              -f deployPreprodRegion=true
-
-            gh workflow --repo neondatabase/aws run deploy-prod.yml --ref main \
-              -f deployPgSniRouter=false \
-              -f deployProxy=false \
-              -f deployStorage=true \
-              -f deployStorageBroker=true \
-              -f deployStorageController=true \
-              -f branch=main \
-              -f dockerTag=${{needs.tag.outputs.build-tag}}
-          elif [[ "$GITHUB_REF_NAME" == "release-proxy" ]]; then
-            gh workflow --repo neondatabase/aws run deploy-dev.yml --ref main \
-              -f deployPgSniRouter=true \
-              -f deployProxy=true \
-              -f deployStorage=false \
-              -f deployStorageBroker=false \
-              -f deployStorageController=false \
-              -f branch=main \
-              -f dockerTag=${{needs.tag.outputs.build-tag}} \
-              -f deployPreprodRegion=true
-
-            gh workflow --repo neondatabase/aws run deploy-proxy-prod.yml --ref main \
-              -f deployPgSniRouter=true \
-              -f deployProxy=true \
-              -f branch=main \
-              -f dockerTag=${{needs.tag.outputs.build-tag}}
+            gh workflow --repo neondatabase/aws run deploy-prod.yml --ref main -f branch=main -f dockerTag=${{needs.tag.outputs.build-tag}} -f disclamerAcknowledged=true
           else
             echo "GITHUB_REF_NAME (value '$GITHUB_REF_NAME') is not set to either 'main' or 'release'"
             exit 1
           fi
 
       - name: Create git tag
-        if: github.ref_name == 'release' || github.ref_name == 'release-proxy'
-        uses: actions/github-script@v7
+        if: github.ref_name == 'release'
+        uses: actions/github-script@v6
         with:
           # Retry script for 5XX server errors: https://github.com/actions/github-script#retries
           retries: 5
@@ -1175,10 +1119,9 @@ jobs:
               sha: context.sha,
             })
 
-      # TODO: check how GitHub releases looks for proxy releases and enable it if it's ok
       - name: Create GitHub release
         if: github.ref_name == 'release'
-        uses: actions/github-script@v7
+        uses: actions/github-script@v6
         with:
           # Retry script for 5XX server errors: https://github.com/actions/github-script#retries
           retries: 5
@@ -1227,11 +1170,3 @@ jobs:
 
             time aws s3 cp --only-show-errors s3://${BUCKET}/${S3_KEY} s3://${BUCKET}/${PREFIX}/${FILENAME}
           done
-
-  pin-build-tools-image:
-    needs: [ build-build-tools-image, promote-images, regress-tests ]
-    if: github.ref_name == 'main'
-    uses: ./.github/workflows/pin-build-tools-image.yml
-    with:
-      from-tag: ${{ needs.build-build-tools-image.outputs.image-tag }}
-    secrets: inherit

.github/workflows/check-build-tools-image.yml

@@ -1,58 +0,0 @@
-name: Check build-tools image
-
-on:
-  workflow_call:
-    outputs:
-      image-tag:
-        description: "build-tools image tag"
-        value: ${{ jobs.check-image.outputs.tag }}
-      found:
-        description: "Whether the image is found in the registry"
-        value: ${{ jobs.check-image.outputs.found }}
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-jobs:
-  check-image:
-    runs-on: ubuntu-latest
-    outputs:
-      tag: ${{ steps.get-build-tools-tag.outputs.image-tag }}
-      found: ${{ steps.check-image.outputs.found }}
-
-    steps:
-      - name: Get build-tools image tag for the current commit
-        id: get-build-tools-tag
-        env:
-          COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: |
-          LAST_BUILD_TOOLS_SHA=$(
-            gh api \
-              -H "Accept: application/vnd.github+json" \
-              -H "X-GitHub-Api-Version: 2022-11-28" \
-              --method GET \
-              --field path=Dockerfile.build-tools \
-              --field sha=${COMMIT_SHA} \
-              --field per_page=1 \
-              --jq ".[0].sha" \
-              "/repos/${GITHUB_REPOSITORY}/commits"
-          )
-          echo "image-tag=${LAST_BUILD_TOOLS_SHA}" | tee -a $GITHUB_OUTPUT
-
-      - name: Check if such tag found in the registry
-        id: check-image
-        env:
-          IMAGE_TAG: ${{ steps.get-build-tools-tag.outputs.image-tag }}
-        run: |
-          if docker manifest inspect neondatabase/build-tools:${IMAGE_TAG}; then
-            found=true
-          else
-            found=false
-          fi
-
-          echo "found=${found}" | tee -a $GITHUB_OUTPUT

.github/workflows/check-permissions.yml

@@ -1,36 +0,0 @@
-name: Check Permissions
-
-on:
-  workflow_call:
-    inputs:
-      github-event-name:
-        required: true
-        type: string
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-jobs:
-  check-permissions:
-    runs-on: ubuntu-latest
-    steps:
-    - name: Disallow CI runs on PRs from forks
-      if: |
-        inputs.github-event-name  == 'pull_request' &&
-        github.event.pull_request.head.repo.full_name != github.repository
-      run: |
-        if [ "${{ contains(fromJSON('["OWNER", "MEMBER", "COLLABORATOR"]'), github.event.pull_request.author_association) }}" = "true" ]; then
-          MESSAGE="Please create a PR from a branch of ${GITHUB_REPOSITORY} instead of a fork"
-        else
-          MESSAGE="The PR should be reviewed and labelled with 'approved-for-ci-run' to trigger a CI run"
-        fi
-
-        # TODO: use actions/github-script to post this message as a PR comment
-        echo >&2 "We don't run CI for PRs from forks"
-        echo >&2 "${MESSAGE}"
-
-        exit 1

.github/workflows/cleanup-caches-by-a-branch.yml

@@ -1,32 +0,0 @@
-# A workflow from
-# https://docs.github.com/en/actions/using-workflows/caching-dependencies-to-speed-up-workflows#force-deleting-cache-entries
-
-name: cleanup caches by a branch
-on:
-  pull_request:
-    types:
-      - closed
-
-jobs:
-  cleanup:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Cleanup
-        run: |
-          gh extension install actions/gh-actions-cache
-
-          echo "Fetching list of cache key"
-          cacheKeysForPR=$(gh actions-cache list -R $REPO -B $BRANCH -L 100 | cut -f 1 )
-
-          ## Setting this to not fail the workflow while deleting cache keys.
-          set +e
-          echo "Deleting caches..."
-          for cacheKey in $cacheKeysForPR
-          do
-              gh actions-cache delete $cacheKey -R $REPO -B $BRANCH --confirm
-          done
-          echo "Done"
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          REPO: ${{ github.repository }}
-          BRANCH: refs/pull/${{ github.event.pull_request.number }}/merge

.github/workflows/neon_extra_builds.yml

@@ -20,31 +20,10 @@ env:
   COPT: '-Werror'
 
 jobs:
-  check-permissions:
-    if: ${{ !contains(github.event.pull_request.labels.*.name, 'run-no-ci') }}
-    uses: ./.github/workflows/check-permissions.yml
-    with:
-      github-event-name: ${{ github.event_name}}
-
-  check-build-tools-image:
-    needs: [ check-permissions ]
-    uses: ./.github/workflows/check-build-tools-image.yml
-
-  build-build-tools-image:
-    needs: [ check-build-tools-image ]
-    uses: ./.github/workflows/build-build-tools-image.yml
-    with:
-      image-tag: ${{ needs.check-build-tools-image.outputs.image-tag }}
-    secrets: inherit
-
   check-macos-build:
-    needs: [ check-permissions ]
-    if: |
-      contains(github.event.pull_request.labels.*.name, 'run-extra-build-macos')  ||
-      contains(github.event.pull_request.labels.*.name, 'run-extra-build-*') ||
-      github.ref_name == 'main'
+    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-extra-build-macos')
     timeout-minutes: 90
-    runs-on: macos-14
+    runs-on: macos-latest
 
     env:
       # Use release build only, to have less debug info around
@@ -75,24 +54,24 @@ jobs:
 
       - name: Cache postgres v14 build
         id: cache_pg_14
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: pg_install/v14
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
+          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
 
       - name: Cache postgres v15 build
         id: cache_pg_15
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: pg_install/v15
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
+          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
 
       - name: Cache postgres v16 build
         id: cache_pg_16
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: pg_install/v16
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v16_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
+          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v16_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
 
       - name: Set extra env for macOS
         run: |
@@ -100,14 +79,14 @@ jobs:
           echo 'CPPFLAGS=-I/usr/local/opt/openssl@3/include' >> $GITHUB_ENV
 
       - name: Cache cargo deps
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: |
             ~/.cargo/registry
             !~/.cargo/registry/src
             ~/.cargo/git
             target
-          key: v1-${{ runner.os }}-${{ runner.arch }}-cargo-${{ hashFiles('./Cargo.lock') }}-${{ hashFiles('./rust-toolchain.toml') }}-rust
+          key: v1-${{ runner.os }}-cargo-${{ hashFiles('./Cargo.lock') }}-${{ hashFiles('./rust-toolchain.toml') }}-rust
 
       - name: Build postgres v14
         if: steps.cache_pg_14.outputs.cache-hit != 'true'
@@ -128,222 +107,16 @@ jobs:
         run: make walproposer-lib -j$(sysctl -n hw.ncpu)
 
       - name: Run cargo build
-        run: PQ_LIB_DIR=$(pwd)/pg_install/v16/lib cargo build --all --release
+        run: cargo build --all --release
 
       - name: Check that no warnings are produced
         run: ./run_clippy.sh
 
-  check-linux-arm-build:
-    needs: [ check-permissions, build-build-tools-image ]
-    timeout-minutes: 90
-    runs-on: [ self-hosted, dev, arm64 ]
-
-    env:
-      # Use release build only, to have less debug info around
-      # Hence keeping target/ (and general cache size) smaller
-      BUILD_TYPE: release
-      CARGO_FEATURES: --features testing
-      CARGO_FLAGS: --release
-      AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-      AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-
-    container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      options: --init
-
-    steps:
-      - name: Fix git ownership
-        run: |
-          # Workaround for `fatal: detected dubious ownership in repository at ...`
-          #
-          # Use both ${{ github.workspace }} and ${GITHUB_WORKSPACE} because they're different on host and in containers
-          #   Ref https://github.com/actions/checkout/issues/785
-          #
-          git config --global --add safe.directory ${{ github.workspace }}
-          git config --global --add safe.directory ${GITHUB_WORKSPACE}
-          for r in 14 15 16; do
-            git config --global --add safe.directory "${{ github.workspace }}/vendor/postgres-v$r"
-            git config --global --add safe.directory "${GITHUB_WORKSPACE}/vendor/postgres-v$r"
-          done
-
-      - name: Checkout
-        uses: actions/checkout@v4
-        with:
-          submodules: true
-          fetch-depth: 1
-
-      - name: Set pg 14 revision for caching
-        id: pg_v14_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v14) >> $GITHUB_OUTPUT
-
-      - name: Set pg 15 revision for caching
-        id: pg_v15_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v15) >> $GITHUB_OUTPUT
-
-      - name: Set pg 16 revision for caching
-        id: pg_v16_rev
-        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v16) >> $GITHUB_OUTPUT
-
-      - name: Set env variables
-        run: |
-          echo "CARGO_HOME=${GITHUB_WORKSPACE}/.cargo" >> $GITHUB_ENV
-
-      - name: Cache postgres v14 build
-        id: cache_pg_14
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v14
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Cache postgres v15 build
-        id: cache_pg_15
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v15
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Cache postgres v16 build
-        id: cache_pg_16
-        uses: actions/cache@v4
-        with:
-          path: pg_install/v16
-          key: v1-${{ runner.os }}-${{ runner.arch }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v16_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
-
-      - name: Build postgres v14
-        if: steps.cache_pg_14.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v14 -j$(nproc)
-
-      - name: Build postgres v15
-        if: steps.cache_pg_15.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v15 -j$(nproc)
-
-      - name: Build postgres v16
-        if: steps.cache_pg_16.outputs.cache-hit != 'true'
-        run: mold -run make postgres-v16 -j$(nproc)
-
-      - name: Build neon extensions
-        run: mold -run make neon-pg-ext -j$(nproc)
-
-      - name: Build walproposer-lib
-        run: mold -run make walproposer-lib -j$(nproc)
-
-      - name: Run cargo build
-        run: |
-          mold -run cargo build --locked $CARGO_FLAGS $CARGO_FEATURES --bins --tests
-
-      - name: Run cargo test
-        env:
-          NEXTEST_RETRIES: 3
-        run: |
-          cargo nextest run $CARGO_FEATURES
-
-          # Run separate tests for real S3
-          export ENABLE_REAL_S3_REMOTE_STORAGE=nonempty
-          export REMOTE_STORAGE_S3_BUCKET=neon-github-ci-tests
-          export REMOTE_STORAGE_S3_REGION=eu-central-1
-          # Avoid `$CARGO_FEATURES` since there's no `testing` feature in the e2e tests now
-          cargo nextest run --package remote_storage --test test_real_s3
-
-          # Run separate tests for real Azure Blob Storage
-          # XXX: replace region with `eu-central-1`-like region
-          export ENABLE_REAL_AZURE_REMOTE_STORAGE=y
-          export AZURE_STORAGE_ACCOUNT="${{ secrets.AZURE_STORAGE_ACCOUNT_DEV }}"
-          export AZURE_STORAGE_ACCESS_KEY="${{ secrets.AZURE_STORAGE_ACCESS_KEY_DEV }}"
-          export REMOTE_STORAGE_AZURE_CONTAINER="${{ vars.REMOTE_STORAGE_AZURE_CONTAINER }}"
-          export REMOTE_STORAGE_AZURE_REGION="${{ vars.REMOTE_STORAGE_AZURE_REGION }}"
-          # Avoid `$CARGO_FEATURES` since there's no `testing` feature in the e2e tests now
-          cargo nextest run --package remote_storage --test test_real_azure
-
-  check-codestyle-rust-arm:
-    needs: [ check-permissions, build-build-tools-image ]
-    timeout-minutes: 90
-    runs-on: [ self-hosted, dev, arm64 ]
-
-    container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-      options: --init
-
-    steps:
-      - name: Fix git ownership
-        run: |
-          # Workaround for `fatal: detected dubious ownership in repository at ...`
-          #
-          # Use both ${{ github.workspace }} and ${GITHUB_WORKSPACE} because they're different on host and in containers
-          #   Ref https://github.com/actions/checkout/issues/785
-          #
-          git config --global --add safe.directory ${{ github.workspace }}
-          git config --global --add safe.directory ${GITHUB_WORKSPACE}
-          for r in 14 15 16; do
-            git config --global --add safe.directory "${{ github.workspace }}/vendor/postgres-v$r"
-            git config --global --add safe.directory "${GITHUB_WORKSPACE}/vendor/postgres-v$r"
-          done
-
-      - name: Checkout
-        uses: actions/checkout@v4
-        with:
-          submodules: true
-          fetch-depth: 1
-
-      # Some of our rust modules use FFI and need those to be checked
-      - name: Get postgres headers
-        run: make postgres-headers -j$(nproc)
-
-      # cargo hack runs the given cargo subcommand (clippy in this case) for all feature combinations.
-      # This will catch compiler & clippy warnings in all feature combinations.
-      # TODO: use cargo hack for build and test as well, but, that's quite expensive.
-      # NB: keep clippy args in sync with ./run_clippy.sh
-      - run: |
-          CLIPPY_COMMON_ARGS="$( source .neon_clippy_args; echo "$CLIPPY_COMMON_ARGS")"
-          if [ "$CLIPPY_COMMON_ARGS" = "" ]; then
-            echo "No clippy args found in .neon_clippy_args"
-            exit 1
-          fi
-          echo "CLIPPY_COMMON_ARGS=${CLIPPY_COMMON_ARGS}" >> $GITHUB_ENV
-      - name: Run cargo clippy (debug)
-        run: cargo hack --feature-powerset clippy $CLIPPY_COMMON_ARGS
-      - name: Run cargo clippy (release)
-        run: cargo hack --feature-powerset clippy --release $CLIPPY_COMMON_ARGS
-
-      - name: Check documentation generation
-        run: cargo doc --workspace --no-deps --document-private-items
-        env:
-            RUSTDOCFLAGS: "-Dwarnings -Arustdoc::private_intra_doc_links"
-
-      # Use `${{ !cancelled() }}` to run quck tests after the longer clippy run
-      - name: Check formatting
-        if: ${{ !cancelled() }}
-        run: cargo fmt --all -- --check
-
-      # https://github.com/facebookincubator/cargo-guppy/tree/bec4e0eb29dcd1faac70b1b5360267fc02bf830e/tools/cargo-hakari#2-keep-the-workspace-hack-up-to-date-in-ci
-      - name: Check rust dependencies
-        if: ${{ !cancelled() }}
-        run: |
-          cargo hakari generate --diff  # workspace-hack Cargo.toml is up-to-date
-          cargo hakari manage-deps --dry-run  # all workspace crates depend on workspace-hack
-
-      # https://github.com/EmbarkStudios/cargo-deny
-      - name: Check rust licenses/bans/advisories/sources
-        if: ${{ !cancelled() }}
-        run: cargo deny check
-
   gather-rust-build-stats:
-    needs: [ check-permissions, build-build-tools-image ]
-    if: |
-      contains(github.event.pull_request.labels.*.name, 'run-extra-build-stats') ||
-      contains(github.event.pull_request.labels.*.name, 'run-extra-build-*') ||
-      github.ref_name == 'main'
+    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-extra-build-stats')
     runs-on: [ self-hosted, gen3, large ]
     container:
-      image: ${{ needs.build-build-tools-image.outputs.image }}
-      credentials:
-        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
       options: --init
 
     env:
@@ -384,7 +157,7 @@ jobs:
           echo "report-url=${REPORT_URL}" >> $GITHUB_OUTPUT
 
       - name: Publish build stats report
-        uses: actions/github-script@v7
+        uses: actions/github-script@v6
         env:
           REPORT_URL: ${{ steps.upload-stats.outputs.report-url }}
           SHA: ${{ github.event.pull_request.head.sha || github.sha }}

.github/workflows/pg_clients.yml

@@ -28,7 +28,7 @@ jobs:
 
     steps:
     - name: Checkout
-      uses: actions/checkout@v4
+      uses: actions/checkout@v3
 
     - uses: actions/setup-python@v4
       with:
@@ -38,10 +38,11 @@ jobs:
       uses: snok/install-poetry@v1
 
     - name: Cache poetry deps
-      uses: actions/cache@v4
+      id: cache_poetry
+      uses: actions/cache@v3
       with:
         path: ~/.cache/pypoetry/virtualenvs
-        key: v2-${{ runner.os }}-python-deps-ubunutu-latest-${{ hashFiles('poetry.lock') }}
+        key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
 
     - name: Install Python deps
       shell: bash -euxo pipefail {0}
@@ -82,7 +83,7 @@ jobs:
     # It will be fixed after switching to gen2 runner
     - name: Upload python test logs
       if: always()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v3
       with:
         retention-days: 7
         name: python-test-pg_clients-${{ runner.os }}-stage-logs

.github/workflows/pin-build-tools-image.yml

@@ -1,72 +0,0 @@
-name: 'Pin build-tools image'
-
-on:
-  workflow_dispatch:
-    inputs:
-      from-tag:
-        description: 'Source tag'
-        required: true
-        type: string
-  workflow_call:
-    inputs:
-      from-tag:
-        description: 'Source tag'
-        required: true
-        type: string
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
-
-concurrency:
-  group: pin-build-tools-image-${{ inputs.from-tag }}
-
-permissions: {}
-
-jobs:
-  tag-image:
-    runs-on: ubuntu-latest
-
-    env:
-      FROM_TAG: ${{ inputs.from-tag }}
-      TO_TAG: pinned
-
-    steps:
-      - name: Check if we really need to pin the image
-        id: check-manifests
-        run: |
-          docker manifest inspect neondatabase/build-tools:${FROM_TAG} > ${FROM_TAG}.json
-          docker manifest inspect neondatabase/build-tools:${TO_TAG}   > ${TO_TAG}.json
-
-          if diff ${FROM_TAG}.json ${TO_TAG}.json; then
-            skip=true
-          else
-            skip=false
-          fi
-
-          echo "skip=${skip}" | tee -a $GITHUB_OUTPUT
-
-      - uses: docker/login-action@v3
-        if: steps.check-manifests.outputs.skip == 'false'
-        with:
-          username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
-          password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
-
-      - name: Tag build-tools with `${{ env.TO_TAG }}` in Docker Hub
-        if: steps.check-manifests.outputs.skip == 'false'
-        run: |
-          docker buildx imagetools create -t neondatabase/build-tools:${TO_TAG} \
-                                             neondatabase/build-tools:${FROM_TAG}
-
-      - uses: docker/login-action@v3
-        if: steps.check-manifests.outputs.skip == 'false'
-        with:
-          registry: 369495373322.dkr.ecr.eu-central-1.amazonaws.com
-          username: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-          password: ${{ secrets.AWS_SECRET_KEY_DEV }}
-
-      - name: Tag build-tools with `${{ env.TO_TAG }}` in ECR
-        if: steps.check-manifests.outputs.skip == 'false'
-        run: |
-          docker buildx imagetools create -t 369495373322.dkr.ecr.eu-central-1.amazonaws.com/build-tools:${TO_TAG} \
-                                             neondatabase/build-tools:${FROM_TAG}

.github/workflows/release.yml

@@ -2,31 +2,12 @@ name: Create Release Branch
 
 on:
   schedule:
-    # It should be kept in sync with if-condition in jobs
-    - cron: '0 6 * * MON' # Storage release
-    - cron: '0 6 * * THU' # Proxy release
+    - cron: '0 7 * * 2'
   workflow_dispatch:
-    inputs:
-      create-storage-release-branch:
-        type: boolean
-        description: 'Create Storage release PR'
-        required: false
-      create-proxy-release-branch:
-        type: boolean
-        description: 'Create Proxy release PR'
-        required: false
-
-# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
-permissions: {}
-
-defaults:
-  run:
-    shell: bash -euo pipefail {0}
 
 jobs:
-  create-storage-release-branch:
-    if: ${{ github.event.schedule == '0 6 * * MON' || format('{0}', inputs.create-storage-release-branch) == 'true' }}
-    runs-on: ubuntu-latest
+  create_release_branch:
+    runs-on: [ ubuntu-latest ]
 
     permissions:
       contents: write # for `git push`
@@ -37,67 +18,27 @@ jobs:
       with:
         ref: main
 
-    - name: Set environment variables
-      run: |
-        echo "RELEASE_DATE=$(date +'%Y-%m-%d')" | tee -a $GITHUB_ENV
-        echo "RELEASE_BRANCH=rc/$(date +'%Y-%m-%d')" | tee -a $GITHUB_ENV
+    - name: Get current date
+      id: date
+      run: echo "date=$(date +'%Y-%m-%d')" >> $GITHUB_OUTPUT
 
     - name: Create release branch
-      run: git checkout -b $RELEASE_BRANCH
+      run: git checkout -b releases/${{ steps.date.outputs.date }}
 
     - name: Push new branch
-      run: git push origin $RELEASE_BRANCH
+      run: git push origin releases/${{ steps.date.outputs.date }}
 
     - name: Create pull request into release
       env:
         GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
       run: |
         cat << EOF > body.md
-          ## Release ${RELEASE_DATE}
+          ## Release ${{ steps.date.outputs.date }}
 
-          **Please merge this Pull Request using 'Create a merge commit' button**
+          **Please merge this PR using 'Create a merge commit'!**
         EOF
 
-        gh pr create --title "Release ${RELEASE_DATE}" \
+        gh pr create --title "Release ${{ steps.date.outputs.date }}" \
                      --body-file "body.md" \
-                     --head "${RELEASE_BRANCH}" \
+                     --head "releases/${{ steps.date.outputs.date }}" \
                      --base "release"
-
-  create-proxy-release-branch:
-    if: ${{ github.event.schedule == '0 6 * * THU' || format('{0}', inputs.create-proxy-release-branch) == 'true' }}
-    runs-on: ubuntu-latest
-
-    permissions:
-      contents: write # for `git push`
-
-    steps:
-    - name: Check out code
-      uses: actions/checkout@v4
-      with:
-        ref: main
-
-    - name: Set environment variables
-      run: |
-        echo "RELEASE_DATE=$(date +'%Y-%m-%d')" | tee -a $GITHUB_ENV
-        echo "RELEASE_BRANCH=rc/proxy/$(date +'%Y-%m-%d')" | tee -a $GITHUB_ENV
-
-    - name: Create release branch
-      run: git checkout -b $RELEASE_BRANCH
-
-    - name: Push new branch
-      run: git push origin $RELEASE_BRANCH
-
-    - name: Create pull request into release
-      env:
-        GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-      run: |
-        cat << EOF > body.md
-          ## Proxy release ${RELEASE_DATE}
-
-          **Please merge this Pull Request using 'Create a merge commit' button**
-        EOF
-
-        gh pr create --title "Proxy release ${RELEASE_DATE}" \
-                     --body-file "body.md" \
-                     --head "${RELEASE_BRANCH}" \
-                     --base "release-proxy"

.github/workflows/trigger-e2e-tests.yml

@@ -1,133 +0,0 @@
-name: Trigger E2E Tests
-
-on:
-  pull_request:
-    types:
-      - ready_for_review
-  workflow_call:
-
-defaults:
-  run:
-    shell: bash -euxo pipefail {0}
-
-env:
-  # A concurrency group that we use for e2e-tests runs, matches `concurrency.group` above with `github.repository` as a prefix
-  E2E_CONCURRENCY_GROUP: ${{ github.repository }}-e2e-tests-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
-  AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-  AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-
-jobs:
-  cancel-previous-e2e-tests:
-    if: github.event_name == 'pull_request'
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Cancel previous e2e-tests runs for this PR
-        env:
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          gh workflow --repo neondatabase/cloud \
-            run cancel-previous-in-concurrency-group.yml \
-              --field concurrency_group="${{ env.E2E_CONCURRENCY_GROUP }}"
-
-  tag:
-    runs-on: [ ubuntu-latest ]
-    outputs:
-      build-tag: ${{ steps.build-tag.outputs.tag }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Get build tag
-        env:
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-          CURRENT_BRANCH: ${{ github.head_ref || github.ref_name }}
-          CURRENT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-        run: |
-          if [[ "$GITHUB_REF_NAME" == "main" ]]; then
-            echo "tag=$(git rev-list --count HEAD)" | tee -a $GITHUB_OUTPUT
-          elif [[ "$GITHUB_REF_NAME" == "release" ]]; then
-            echo "tag=release-$(git rev-list --count HEAD)" | tee -a $GITHUB_OUTPUT
-          elif [[ "$GITHUB_REF_NAME" == "release-proxy" ]]; then
-            echo "tag=release-proxy-$(git rev-list --count HEAD)" >> $GITHUB_OUTPUT
-          else
-            echo "GITHUB_REF_NAME (value '$GITHUB_REF_NAME') is not set to either 'main' or 'release'"
-            BUILD_AND_TEST_RUN_ID=$(gh run list -b $CURRENT_BRANCH -c $CURRENT_SHA -w 'Build and Test' -L 1 --json databaseId --jq '.[].databaseId')
-            echo "tag=$BUILD_AND_TEST_RUN_ID" | tee -a $GITHUB_OUTPUT
-          fi
-        id: build-tag
-
-  trigger-e2e-tests:
-    needs: [ tag ]
-    runs-on: ubuntu-latest
-    env:
-      TAG: ${{ needs.tag.outputs.build-tag }}
-    steps:
-      - name: check if ecr image are present
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
-        run: |
-          for REPO in neon compute-tools compute-node-v14 vm-compute-node-v14 compute-node-v15 vm-compute-node-v15 compute-node-v16 vm-compute-node-v16; do
-            OUTPUT=$(aws ecr describe-images --repository-name ${REPO} --region eu-central-1 --query "imageDetails[?imageTags[?contains(@, '${TAG}')]]" --output text)
-            if [ "$OUTPUT" == "" ]; then
-              echo "$REPO with image tag $TAG not found" >> $GITHUB_OUTPUT
-              exit 1
-            fi
-          done
-
-      - name: Set e2e-platforms
-        id: e2e-platforms
-        env:
-          PR_NUMBER: ${{ github.event.pull_request.number }}
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: |
-          # Default set of platforms to run e2e tests on
-          platforms='["docker", "k8s"]'
-
-          # If the PR changes vendor/, pgxn/ or libs/vm_monitor/ directories, or Dockerfile.compute-node, add k8s-neonvm to the list of platforms.
-          # If the workflow run is not a pull request, add k8s-neonvm to the list.
-          if [ "$GITHUB_EVENT_NAME" == "pull_request" ]; then
-            for f in $(gh api "/repos/${GITHUB_REPOSITORY}/pulls/${PR_NUMBER}/files" --paginate --jq '.[].filename'); do
-              case "$f" in
-                vendor/*|pgxn/*|libs/vm_monitor/*|Dockerfile.compute-node)
-                  platforms=$(echo "${platforms}" | jq --compact-output '. += ["k8s-neonvm"] | unique')
-                  ;;
-                *)
-                  # no-op
-                  ;;
-              esac
-            done
-          else
-            platforms=$(echo "${platforms}" | jq --compact-output '. += ["k8s-neonvm"] | unique')
-          fi
-
-          echo "e2e-platforms=${platforms}" | tee -a $GITHUB_OUTPUT
-
-      - name: Set PR's status to pending and request a remote CI test
-        env:
-          E2E_PLATFORMS: ${{ steps.e2e-platforms.outputs.e2e-platforms }}
-          COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
-        run: |
-          REMOTE_REPO="${GITHUB_REPOSITORY_OWNER}/cloud"
-
-          gh api "/repos/${GITHUB_REPOSITORY}/statuses/${COMMIT_SHA}" \
-            --method POST \
-            --raw-field "state=pending" \
-            --raw-field "description=[$REMOTE_REPO] Remote CI job is about to start" \
-            --raw-field "context=neon-cloud-e2e"
-
-          gh workflow --repo ${REMOTE_REPO} \
-            run testing.yml \
-              --ref "main" \
-              --raw-field "ci_job_name=neon-cloud-e2e" \
-              --raw-field "commit_hash=$COMMIT_SHA" \
-              --raw-field "remote_repo=${GITHUB_REPOSITORY}" \
-              --raw-field "storage_image_tag=${TAG}" \
-              --raw-field "compute_image_tag=${TAG}" \
-              --raw-field "concurrency_group=${E2E_CONCURRENCY_GROUP}" \
-              --raw-field "e2e-platforms=${E2E_PLATFORMS}"

.gitignore

@@ -6,10 +6,8 @@ __pycache__/
 test_output/
 .vscode
 .idea
-neon.iml
 /.neon
 /integration_tests/.neon
-compaction-suite-results.*
 
 # Coverage
 *.profraw
@@ -20,6 +18,3 @@ compaction-suite-results.*
 *.o
 *.so
 *.Po
-
-# pgindent typedef lists
-*.list

CODEOWNERS

@@ -1,13 +1,12 @@
 /compute_tools/ @neondatabase/control-plane @neondatabase/compute
-/control_plane/attachment_service @neondatabase/storage
-/libs/pageserver_api/ @neondatabase/storage
-/libs/postgres_ffi/ @neondatabase/compute @neondatabase/safekeepers
+/control_plane/ @neondatabase/compute @neondatabase/storage
+/libs/pageserver_api/ @neondatabase/compute @neondatabase/storage
+/libs/postgres_ffi/ @neondatabase/compute
 /libs/remote_storage/ @neondatabase/storage
 /libs/safekeeper_api/ @neondatabase/safekeepers
-/libs/vm_monitor/ @neondatabase/autoscaling
+/libs/vm_monitor/ @neondatabase/autoscaling @neondatabase/compute
 /pageserver/ @neondatabase/storage
 /pgxn/ @neondatabase/compute
-/pgxn/neon/ @neondatabase/compute @neondatabase/safekeepers
 /proxy/ @neondatabase/proxy
 /safekeeper/ @neondatabase/safekeepers
 /vendor/ @neondatabase/compute

CONTRIBUTING.md

@@ -9,24 +9,6 @@ refactoring, additional comments, and so forth. Let's try to raise the
 bar, and clean things up as we go. Try to leave code in a better shape
 than it was before.
 
-## Pre-commit hook
-
-We have a sample pre-commit hook in `pre-commit.py`.
-To set it up, run:
-
-```bash
-ln -s ../../pre-commit.py .git/hooks/pre-commit
-```
-
-This will run following checks on staged files before each commit:
-- `rustfmt`
-- checks for Python files, see [obligatory checks](/docs/sourcetree.md#obligatory-checks).
-
-There is also a separate script `./run_clippy.sh` that runs `cargo clippy` on the whole project
-and `./scripts/reformat` that runs all formatting tools to ensure the project is up to date.
-
-If you want to skip the hook, run `git commit` with `--no-verify` option.
-
 ## Submitting changes
 
 1. Get at least one +1 on your PR before you push.
@@ -54,9 +36,6 @@ _An instruction for maintainers_
 - If and only if it looks **safe** (i.e. it doesn't contain any malicious code which could expose secrets or harm the CI), then:
     - Press the "Approve and run" button in GitHub UI
     - Add the `approved-for-ci-run` label to the PR
-    - Currently draft PR will skip e2e test (only for internal contributors). After turning the PR 'Ready to Review' CI will trigger e2e test
-      - Add `run-e2e-tests-in-draft` label to run e2e test in draft PR (override above behaviour)
-      - The `approved-for-ci-run` workflow will add `run-e2e-tests-in-draft` automatically to run e2e test for external contributors
 
 Repeat all steps after any change to the PR.
 - When the changes are ready to get merged — merge the original PR (not the internal one)
@@ -73,12 +52,3 @@ We're using the following approach to make it work:
 - The label gets removed automatically, so to run CI again with new changes, the label should be added again (after the review)
 
 For details see [`approved-for-ci-run.yml`](.github/workflows/approved-for-ci-run.yml)
-
-## How do I make build-tools image "pinned"
-
-It's possible to update the `pinned` tag of the `build-tools` image using the `pin-build-tools-image.yml` workflow.
-
-```bash
-gh workflow -R neondatabase/neon run pin-build-tools-image.yml \
-            -f from-tag=cc98d9b00d670f182c507ae3783342bd7e64c31e
-```

Cargo.toml

@@ -3,12 +3,8 @@ resolver = "2"
 members = [
     "compute_tools",
     "control_plane",
-    "control_plane/attachment_service",
     "pageserver",
-    "pageserver/compaction",
     "pageserver/ctl",
-    "pageserver/client",
-    "pageserver/pagebench",
     "proxy",
     "safekeeper",
     "storage_broker",
@@ -19,7 +15,6 @@ members = [
     "libs/pageserver_api",
     "libs/postgres_ffi",
     "libs/safekeeper_api",
-    "libs/desim",
     "libs/utils",
     "libs/consumption_metrics",
     "libs/postgres_backend",
@@ -41,23 +36,19 @@ license = "Apache-2.0"
 ## All dependency versions, used in the project
 [workspace.dependencies]
 anyhow = { version = "1.0", features = ["backtrace"] }
-arc-swap = "1.6"
-async-compression = { version = "0.4.0", features = ["tokio", "gzip", "zstd"] }
-azure_core = "0.18"
-azure_identity = "0.18"
-azure_storage = "0.18"
-azure_storage_blobs = "0.18"
+async-compression = { version = "0.4.0", features = ["tokio", "gzip"] }
+azure_core = "0.16"
+azure_identity = "0.16"
+azure_storage = "0.16"
+azure_storage_blobs = "0.16"
 flate2 = "1.0.26"
 async-stream = "0.3"
 async-trait = "0.1"
-aws-config = { version = "1.1.4", default-features = false, features=["rustls"] }
-aws-sdk-s3 = "1.14"
-aws-sdk-iam = "1.15.0"
-aws-smithy-async = { version = "1.1.4", default-features = false, features=["rt-tokio"] }
-aws-smithy-types = "1.1.4"
-aws-credential-types = "1.1.4"
-aws-sigv4 = { version = "1.2.0", features = ["sign-http"] }
-aws-types = "1.1.7"
+aws-config = { version = "0.56", default-features = false, features=["rustls"] }
+aws-sdk-s3 = "0.29"
+aws-smithy-http = "0.56"
+aws-credential-types = "0.56"
+aws-types = "0.56"
 axum = { version = "0.6.20", features = ["ws"] }
 base64 = "0.13.0"
 bincode = "1.3"
@@ -69,118 +60,98 @@ camino = "1.1.6"
 cfg-if = "1.0.0"
 chrono = { version = "0.4", default-features = false, features = ["clock"] }
 clap = { version = "4.0", features = ["derive"] }
+close_fds = "0.3.2"
 comfy-table = "6.1"
 const_format = "0.2"
 crc32c = "0.6"
 crossbeam-utils = "0.8.5"
-dashmap = { version = "5.5.0", features = ["raw-api"] }
+dashmap = "5.5.0"
 either = "1.8"
 enum-map = "2.4.2"
 enumset = "1.0.12"
 fail = "0.5.0"
-fallible-iterator = "0.2"
 fs2 = "0.4.3"
 futures = "0.3"
 futures-core = "0.3"
 futures-util = "0.3"
 git-version = "0.3"
 hashbrown = "0.13"
-hashlink = "0.8.4"
-hdrhistogram = "7.5.2"
+hashlink = "0.8.1"
 hex = "0.4"
 hex-literal = "0.4"
 hmac = "0.12.1"
 hostname = "0.3.1"
-http = {version = "1.1.0", features = ["std"]}
-http-types = { version = "2", default-features = false }
+http-types = "2"
 humantime = "2.1"
 humantime-serde = "1.1.1"
 hyper = "0.14"
 hyper-tungstenite = "0.11"
 inotify = "0.10.2"
-ipnet = "2.9.0"
 itertools = "0.10"
-jsonwebtoken = "9"
-lasso = "0.7"
-leaky-bucket = "1.0.1"
+jsonwebtoken = "8"
 libc = "0.2"
 md5 = "0.7.0"
-measured = { version = "0.0.13", features=["default", "lasso"] }
 memoffset = "0.8"
 native-tls = "0.2"
-nix = { version = "0.27", features = ["fs", "process", "socket", "signal", "poll"] }
-notify = "6.0.0"
+nix = "0.26"
+notify = "5.0.0"
 num_cpus = "1.15"
 num-traits = "0.2.15"
 once_cell = "1.13"
-opentelemetry = "0.20.0"
-opentelemetry-otlp = { version = "0.13.0", default_features=false, features = ["http-proto", "trace", "http", "reqwest-client"] }
-opentelemetry-semantic-conventions = "0.12.0"
+opentelemetry = "0.19.0"
+opentelemetry-otlp = { version = "0.12.0", default_features=false, features = ["http-proto", "trace", "http", "reqwest-client"] }
+opentelemetry-semantic-conventions = "0.11.0"
 parking_lot = "0.12"
-parquet = { version = "49.0.0", default-features = false, features = ["zstd"] }
-parquet_derive = "49.0.0"
 pbkdf2 = { version = "0.12.1", features = ["simple", "std"] }
 pin-project-lite = "0.2"
-procfs = "0.14"
 prometheus = {version = "0.13", default_features=false, features = ["process"]} # removes protobuf dependency
 prost = "0.11"
 rand = "0.8"
-redis = { version = "0.25.2", features = ["tokio-rustls-comp", "keep-alive"] }
-regex = "1.10.2"
+regex = "1.4"
 reqwest = { version = "0.11", default-features = false, features = ["rustls-tls"] }
-reqwest-tracing = { version = "0.4.7", features = ["opentelemetry_0_20"] }
+reqwest-tracing = { version = "0.4.0", features = ["opentelemetry_0_19"] }
 reqwest-middleware = "0.2.0"
 reqwest-retry = "0.2.2"
 routerify = "3"
 rpds = "0.13"
 rustc-hash = "1.1.0"
-rustls = "0.22"
-rustls-pemfile = "2"
+rustls = "0.21"
+rustls-pemfile = "1"
 rustls-split = "0.3"
 scopeguard = "1.1"
 sysinfo = "0.29.2"
-sd-notify = "0.4.1"
 sentry = { version = "0.31", default-features = false, features = ["backtrace", "contexts", "panic", "rustls", "reqwest" ] }
 serde = { version = "1.0", features = ["derive"] }
 serde_json = "1"
-serde_path_to_error = "0.1"
 serde_with = "2.0"
-serde_assert = "0.5.0"
 sha2 = "0.10.2"
 signal-hook = "0.3"
 smallvec = "1.11"
-smol_str = { version = "0.2.0", features = ["serde"] }
 socket2 = "0.5"
 strum = "0.24"
 strum_macros = "0.24"
-"subtle"  = "2.5.0"
 svg_fmt = "0.4.1"
 sync_wrapper = "0.1.2"
 tar = "0.4"
-task-local-extensions = "0.1.4"
 test-context = "0.1"
 thiserror = "1.0"
-tikv-jemallocator = "0.5"
-tikv-jemalloc-ctl = "0.5"
+tls-listener = { version = "0.7", features = ["rustls", "hyper-h1"] }
 tokio = { version = "1.17", features = ["macros"] }
-tokio-epoll-uring = { git = "https://github.com/neondatabase/tokio-epoll-uring.git" , branch = "main" }
 tokio-io-timeout = "1.2.0"
-tokio-postgres-rustls = "0.11.0"
-tokio-rustls = "0.25"
+tokio-postgres-rustls = "0.10.0"
+tokio-rustls = "0.24"
 tokio-stream = "0.1"
 tokio-tar = "0.3"
-tokio-util = { version = "0.7.10", features = ["io", "rt"] }
+tokio-util = { version = "0.7", features = ["io"] }
 toml = "0.7"
 toml_edit = "0.19"
 tonic = {version = "0.9", features = ["tls", "tls-roots"]}
 tracing = "0.1"
 tracing-error = "0.2.0"
-tracing-opentelemetry = "0.20.0"
+tracing-opentelemetry = "0.19.0"
 tracing-subscriber = { version = "0.3", default_features = false, features = ["smallvec", "fmt", "tracing-log", "std", "env-filter", "json"] }
-twox-hash = { version = "1.6.3", default-features = false }
 url = "2.2"
-urlencoding = "2.1"
-uuid = { version = "1.6.1", features = ["v4", "v7", "serde"] }
+uuid = { version = "1.2", features = ["v4", "serde"] }
 walkdir = "2.3.2"
 webpki-roots = "0.25"
 x509-parser = "0.15"
@@ -190,11 +161,11 @@ env_logger = "0.10"
 log = "0.4"
 
 ## Libraries from neondatabase/ git forks, ideally with changes to be upstreamed
-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", branch="neon" }
-postgres-native-tls = { git = "https://github.com/neondatabase/rust-postgres.git", branch="neon" }
-postgres-protocol = { git = "https://github.com/neondatabase/rust-postgres.git", branch="neon" }
-postgres-types = { git = "https://github.com/neondatabase/rust-postgres.git", branch="neon" }
-tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", branch="neon" }
+postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="7434d9388965a17a6d113e5dfc0e65666a03b4c2" }
+postgres-native-tls = { git = "https://github.com/neondatabase/rust-postgres.git", rev="7434d9388965a17a6d113e5dfc0e65666a03b4c2" }
+postgres-protocol = { git = "https://github.com/neondatabase/rust-postgres.git", rev="7434d9388965a17a6d113e5dfc0e65666a03b4c2" }
+postgres-types = { git = "https://github.com/neondatabase/rust-postgres.git", rev="7434d9388965a17a6d113e5dfc0e65666a03b4c2" }
+tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="7434d9388965a17a6d113e5dfc0e65666a03b4c2" }
 
 ## Other git libraries
 heapless = { default-features=false, features=[], git = "https://github.com/japaric/heapless.git", rev = "644653bf3b831c6bb4963be2de24804acf5e5001" } # upstream release pending
@@ -204,15 +175,12 @@ compute_api = { version = "0.1", path = "./libs/compute_api/" }
 consumption_metrics = { version = "0.1", path = "./libs/consumption_metrics/" }
 metrics = { version = "0.1", path = "./libs/metrics/" }
 pageserver_api = { version = "0.1", path = "./libs/pageserver_api/" }
-pageserver_client = { path = "./pageserver/client" }
-pageserver_compaction = { version = "0.1", path = "./pageserver/compaction/" }
 postgres_backend = { version = "0.1", path = "./libs/postgres_backend/" }
 postgres_connection = { version = "0.1", path = "./libs/postgres_connection/" }
 postgres_ffi = { version = "0.1", path = "./libs/postgres_ffi/" }
 pq_proto = { version = "0.1", path = "./libs/pq_proto/" }
 remote_storage = { version = "0.1", path = "./libs/remote_storage/" }
 safekeeper_api = { version = "0.1", path = "./libs/safekeeper_api" }
-desim = { version = "0.1", path = "./libs/desim" }
 storage_broker = { version = "0.1", path = "./storage_broker/" } # Note: main broker code is inside the binary crate, so linking with the library shouldn't be heavy.
 tenant_size_model = { version = "0.1", path = "./libs/tenant_size_model/" }
 tracing-utils = { version = "0.1", path = "./libs/tracing-utils/" }
@@ -225,7 +193,7 @@ workspace_hack = { version = "0.1", path = "./workspace_hack/" }
 
 ## Build dependencies
 criterion = "0.5.1"
-rcgen = "0.12"
+rcgen = "0.11"
 rstest = "0.18"
 camino-tempfile = "1.0.2"
 tonic-build = "0.9"
@@ -234,11 +202,7 @@ tonic-build = "0.9"
 
 # This is only needed for proxy's tests.
 # TODO: we should probably fork `tokio-postgres-rustls` instead.
-tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", branch="neon" }
-
-# bug fixes for UUID
-parquet = { git = "https://github.com/neondatabase/arrow-rs", branch = "neon-fix-bugs" }
-parquet_derive = { git = "https://github.com/neondatabase/arrow-rs", branch = "neon-fix-bugs" }
+tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="7434d9388965a17a6d113e5dfc0e65666a03b4c2" }
 
 ################# Binary contents sections
 

Dockerfile

@@ -3,7 +3,7 @@
 ### By default, the binaries inside the image have some mock parameters and can start, but are not intended to be used
 ### inside this image in the real deployments.
 ARG REPOSITORY=neondatabase
-ARG IMAGE=build-tools
+ARG IMAGE=rust
 ARG TAG=pinned
 
 # Build Postgres
@@ -27,7 +27,6 @@ RUN set -e \
 FROM $REPOSITORY/$IMAGE:$TAG AS build
 WORKDIR /home/nonroot
 ARG GIT_VERSION=local
-ARG BUILD_TAG
 
 # Enable https://github.com/paritytech/cachepot to cache Rust crates' compilation results in Docker builds.
 # Set up cachepot to use an AWS S3 bucket for cache results, to reuse it between `docker build` invocations.
@@ -47,13 +46,12 @@ COPY --chown=nonroot . .
 # Show build caching stats to check if it was used in the end.
 # Has to be the part of the same RUN since cachepot daemon is killed in the end of this RUN, losing the compilation stats.
 RUN set -e \
-    && RUSTFLAGS="-Clinker=clang -Clink-arg=-fuse-ld=mold -Clink-arg=-Wl,--no-rosegment" cargo build  \
+    && mold -run cargo build  \
       --bin pg_sni_router  \
       --bin pageserver  \
       --bin pagectl  \
       --bin safekeeper  \
       --bin storage_broker  \
-      --bin storage_controller  \
       --bin proxy  \
       --bin neon_local \
       --locked --release \
@@ -80,10 +78,9 @@ COPY --from=build --chown=neon:neon /home/nonroot/target/release/pg_sni_router
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/pageserver          /usr/local/bin
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/pagectl             /usr/local/bin
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/safekeeper          /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_broker      /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_controller  /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_broker         /usr/local/bin
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/proxy               /usr/local/bin
-COPY --from=build --chown=neon:neon /home/nonroot/target/release/neon_local          /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/neon_local               /usr/local/bin
 
 COPY --from=pg-build /home/nonroot/pg_install/v14 /usr/local/v14/
 COPY --from=pg-build /home/nonroot/pg_install/v15 /usr/local/v15/
@@ -100,11 +97,6 @@ RUN mkdir -p /data/.neon/ && chown -R neon:neon /data/.neon/ \
        -c "listen_pg_addr='0.0.0.0:6400'" \
        -c "listen_http_addr='0.0.0.0:9898'"
 
-# When running a binary that links with libpq, default to using our most recent postgres version.  Binaries
-# that want a particular postgres version will select it explicitly: this is just a default.
-ENV LD_LIBRARY_PATH /usr/local/v16/lib
-
-
 VOLUME ["/data"]
 USER neon
 EXPOSE 6400

Dockerfile.build-tools

@@ -1,166 +0,0 @@
-FROM debian:bullseye-slim
-
-# Add nonroot user
-RUN useradd -ms /bin/bash nonroot -b /home
-SHELL ["/bin/bash", "-c"]
-
-# System deps
-RUN set -e \
-    && apt update \
-    && apt install -y \
-        autoconf \
-        automake \
-        bison \
-        build-essential \
-        ca-certificates \
-        cmake \
-        curl \
-        flex \
-        git \
-        gnupg \
-        gzip \
-        jq \
-        libcurl4-openssl-dev \
-        libbz2-dev \
-        libffi-dev \
-        liblzma-dev \
-        libncurses5-dev \
-        libncursesw5-dev \
-        libpq-dev \
-        libreadline-dev \
-        libseccomp-dev \
-        libsqlite3-dev \
-        libssl-dev \
-        libstdc++-10-dev \
-        libtool \
-        libxml2-dev \
-        libxmlsec1-dev \
-        libxxhash-dev \
-        lsof \
-        make \
-        netcat \
-        net-tools \
-        openssh-client \
-        parallel \
-        pkg-config \
-        unzip \
-        wget \
-        xz-utils \
-        zlib1g-dev \
-        zstd \
-    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
-
-# protobuf-compiler (protoc)
-ENV PROTOC_VERSION 25.1
-RUN curl -fsSL "https://github.com/protocolbuffers/protobuf/releases/download/v${PROTOC_VERSION}/protoc-${PROTOC_VERSION}-linux-$(uname -m | sed 's/aarch64/aarch_64/g').zip" -o "protoc.zip" \
-    && unzip -q protoc.zip -d protoc \
-    && mv protoc/bin/protoc /usr/local/bin/protoc \
-    && mv protoc/include/google /usr/local/include/google \
-    && rm -rf protoc.zip protoc
-
-# LLVM
-ENV LLVM_VERSION=17
-RUN curl -fsSL 'https://apt.llvm.org/llvm-snapshot.gpg.key' | apt-key add - \
-    && echo "deb http://apt.llvm.org/bullseye/ llvm-toolchain-bullseye-${LLVM_VERSION} main" > /etc/apt/sources.list.d/llvm.stable.list \
-    && apt update \
-    && apt install -y clang-${LLVM_VERSION} llvm-${LLVM_VERSION} \
-    && bash -c 'for f in /usr/bin/clang*-${LLVM_VERSION} /usr/bin/llvm*-${LLVM_VERSION}; do ln -s "${f}" "${f%-${LLVM_VERSION}}"; done' \
-    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
-
-# PostgreSQL 14
-RUN curl -fsSL 'https://www.postgresql.org/media/keys/ACCC4CF8.asc' | apt-key add - \
-    && echo 'deb http://apt.postgresql.org/pub/repos/apt bullseye-pgdg main' > /etc/apt/sources.list.d/pgdg.list \
-    && apt update \
-    && apt install -y postgresql-client-14 \
-    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
-
-# AWS CLI
-RUN curl "https://awscli.amazonaws.com/awscli-exe-linux-$(uname -m).zip" -o "awscliv2.zip" \
-    && unzip -q awscliv2.zip \
-    && ./aws/install \
-    && rm awscliv2.zip
-
-# Mold: A Modern Linker
-ENV MOLD_VERSION v2.4.0
-RUN set -e \
-    && git clone https://github.com/rui314/mold.git \
-    && mkdir mold/build \
-    && cd mold/build \
-    && git checkout ${MOLD_VERSION} \
-    && cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_CXX_COMPILER=clang++ .. \
-    && cmake --build . -j $(nproc) \
-    && cmake --install . \
-    && cd .. \
-    && rm -rf mold
-
-# LCOV
-# Build lcov from a fork:
-# It includes several bug fixes on top on v2.0 release (https://github.com/linux-test-project/lcov/compare/v2.0...master)
-# And patches from us:
-# - Generates json file with code coverage summary (https://github.com/neondatabase/lcov/commit/426e7e7a22f669da54278e9b55e6d8caabd00af0.tar.gz)
-RUN for package in Capture::Tiny DateTime Devel::Cover Digest::MD5 File::Spec JSON::XS Memory::Process Time::HiRes JSON; do yes | perl -MCPAN -e "CPAN::Shell->notest('install', '$package')"; done \
-    && wget https://github.com/neondatabase/lcov/archive/426e7e7a22f669da54278e9b55e6d8caabd00af0.tar.gz -O lcov.tar.gz \
-    && echo "61a22a62e20908b8b9e27d890bd0ea31f567a7b9668065589266371dcbca0992  lcov.tar.gz" | sha256sum --check \
-    && mkdir -p lcov && tar -xzf lcov.tar.gz -C lcov --strip-components=1 \
-    && cd lcov \
-    && make install \
-    && rm -rf ../lcov.tar.gz
-
-# Switch to nonroot user
-USER nonroot:nonroot
-WORKDIR /home/nonroot
-
-# Python
-ENV PYTHON_VERSION=3.9.18 \
-    PYENV_ROOT=/home/nonroot/.pyenv \
-    PATH=/home/nonroot/.pyenv/shims:/home/nonroot/.pyenv/bin:/home/nonroot/.poetry/bin:$PATH
-RUN set -e \
-    && cd $HOME \
-    && curl -sSO https://raw.githubusercontent.com/pyenv/pyenv-installer/master/bin/pyenv-installer \
-    && chmod +x pyenv-installer \
-    && ./pyenv-installer \
-    && export PYENV_ROOT=/home/nonroot/.pyenv \
-    && export PATH="$PYENV_ROOT/bin:$PATH" \
-    && export PATH="$PYENV_ROOT/shims:$PATH" \
-    && pyenv install ${PYTHON_VERSION} \
-    && pyenv global ${PYTHON_VERSION} \
-    && python --version \
-    && pip install --upgrade pip \
-    && pip --version \
-    && pip install pipenv wheel poetry
-
-# Switch to nonroot user (again)
-USER nonroot:nonroot
-WORKDIR /home/nonroot
-
-# Rust
-# Please keep the version of llvm (installed above) in sync with rust llvm (`rustc --version --verbose | grep LLVM`)
-ENV RUSTC_VERSION=1.77.0
-ENV RUSTUP_HOME="/home/nonroot/.rustup"
-ENV PATH="/home/nonroot/.cargo/bin:${PATH}"
-RUN curl -sSO https://static.rust-lang.org/rustup/dist/$(uname -m)-unknown-linux-gnu/rustup-init && whoami && \
-	chmod +x rustup-init && \
-	./rustup-init -y --default-toolchain ${RUSTC_VERSION} && \
-	rm rustup-init && \
-    export PATH="$HOME/.cargo/bin:$PATH" && \
-    . "$HOME/.cargo/env" && \
-    cargo --version && rustup --version && \
-    rustup component add llvm-tools-preview rustfmt clippy && \
-    cargo install --git https://github.com/paritytech/cachepot && \
-    cargo install rustfilt && \
-    cargo install cargo-hakari && \
-    cargo install cargo-deny --locked && \
-    cargo install cargo-hack && \
-    cargo install cargo-nextest && \
-    rm -rf /home/nonroot/.cargo/registry && \
-    rm -rf /home/nonroot/.cargo/git
-ENV RUSTC_WRAPPER=cachepot
-
-# Show versions
-RUN whoami \
-    && python --version \
-    && pip --version \
-    && cargo --version --verbose \
-    && rustup --version --verbose \
-    && rustc --version --verbose \
-    && clang --version

Dockerfile.compute-node

@@ -1,6 +1,6 @@
 ARG PG_VERSION
 ARG REPOSITORY=neondatabase
-ARG IMAGE=build-tools
+ARG IMAGE=rust
 ARG TAG=pinned
 ARG BUILD_TAG
 
@@ -48,29 +48,7 @@ RUN cd postgres && \
     echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgrowlocks.control && \
     echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgstattuple.control && \
     echo 'trusted = true' >> /usr/local/pgsql/share/extension/refint.control && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/xml2.control && \
-    # We need to grant EXECUTE on pg_stat_statements_reset() to neon_superuser.
-    # In vanilla postgres this function is limited to Postgres role superuser.
-    # In neon we have neon_superuser role that is not a superuser but replaces superuser in some cases.
-    # We could add the additional grant statements to the postgres repository but it would be hard to maintain,
-    # whenever we need to pick up a new postgres version and we want to limit the changes in our postgres fork,
-    # so we do it here.
-    old_list="pg_stat_statements--1.0--1.1.sql pg_stat_statements--1.1--1.2.sql pg_stat_statements--1.2--1.3.sql pg_stat_statements--1.3--1.4.sql pg_stat_statements--1.4--1.5.sql pg_stat_statements--1.4.sql pg_stat_statements--1.5--1.6.sql"; \
-    # the first loop is for pg_stat_statement extension version <= 1.6
-    for file in /usr/local/pgsql/share/extension/pg_stat_statements--*.sql; do \
-        filename=$(basename "$file"); \
-        if echo "$old_list" | grep -q -F "$filename"; then \
-            echo 'GRANT EXECUTE ON FUNCTION pg_stat_statements_reset() TO neon_superuser;' >> $file; \
-        fi; \
-    done; \
-    # the second loop is for pg_stat_statement extension versions >= 1.7,
-    # where pg_stat_statement_reset() got 3 additional arguments
-    for file in /usr/local/pgsql/share/extension/pg_stat_statements--*.sql; do \
-        filename=$(basename "$file"); \
-        if ! echo "$old_list" | grep -q -F "$filename"; then \
-            echo 'GRANT EXECUTE ON FUNCTION pg_stat_statements_reset(Oid, Oid, bigint) TO neon_superuser;' >> $file; \
-        fi; \
-    done
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/xml2.control
 
 #########################################################################################
 #
@@ -143,24 +121,29 @@ RUN wget https://github.com/pgRouting/pgrouting/archive/v3.4.2.tar.gz -O pgrouti
 #########################################################################################
 FROM build-deps AS plv8-build
 COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
 RUN apt update && \
     apt install -y ninja-build python3-dev libncurses5 binutils clang
 
-RUN wget https://github.com/plv8/plv8/archive/refs/tags/v3.1.10.tar.gz -O plv8.tar.gz && \
-    echo "7096c3290928561f0d4901b7a52794295dc47f6303102fae3f8e42dd575ad97d plv8.tar.gz" | sha256sum --check && \
+RUN case "${PG_VERSION}" in \
+      "v14" | "v15") \
+        export PLV8_VERSION=3.1.5 \
+        export PLV8_CHECKSUM=1e108d5df639e4c189e1c5bdfa2432a521c126ca89e7e5a969d46899ca7bf106 \
+        ;; \
+      "v16") \
+        export PLV8_VERSION=3.1.8 \
+        export PLV8_CHECKSUM=92b10c7db39afdae97ff748c9ec54713826af222c459084ad002571b79eb3f49 \
+        ;; \
+      *) \
+        echo "Export the valid PG_VERSION variable" && exit 1 \
+        ;; \
+    esac && \
+    wget https://github.com/plv8/plv8/archive/refs/tags/v${PLV8_VERSION}.tar.gz -O plv8.tar.gz && \
+    echo "${PLV8_CHECKSUM} plv8.tar.gz" | sha256sum --check && \
     mkdir plv8-src && cd plv8-src && tar xvzf ../plv8.tar.gz --strip-components=1 -C . && \
-    # generate and copy upgrade scripts
-    mkdir -p upgrade && ./generate_upgrade.sh 3.1.10 && \
-    cp upgrade/* /usr/local/pgsql/share/extension/ && \
     export PATH="/usr/local/pgsql/bin:$PATH" && \
     make DOCKER=1 -j $(getconf _NPROCESSORS_ONLN) install && \
     rm -rf /plv8-* && \
     find /usr/local/pgsql/ -name "plv8-*.so" | xargs strip && \
-    # don't break computes with installed old version of plv8
-    cd /usr/local/pgsql/lib/ && \
-    ln -s plv8-3.1.10.so plv8-3.1.5.so && \
-    ln -s plv8-3.1.10.so plv8-3.1.8.so && \
     echo 'trusted = true' >> /usr/local/pgsql/share/extension/plv8.control && \
     echo 'trusted = true' >> /usr/local/pgsql/share/extension/plcoffee.control && \
     echo 'trusted = true' >> /usr/local/pgsql/share/extension/plls.control
@@ -410,9 +393,7 @@ RUN case "${PG_VERSION}" in \
         export TIMESCALEDB_CHECKSUM=6fca72a6ed0f6d32d2b3523951ede73dc5f9b0077b38450a029a5f411fdb8c73 \
         ;; \
       *) \
-        export TIMESCALEDB_VERSION=2.13.0 \
-        export TIMESCALEDB_CHECKSUM=584a351c7775f0e067eaa0e7277ea88cab9077cc4c455cbbf09a5d9723dce95d \
-        ;; \
+        echo "TimescaleDB not supported on this PostgreSQL version. See https://github.com/timescale/timescaledb/issues/5752" && exit 0;; \
     esac && \
     apt-get update && \
     apt-get install -y cmake && \
@@ -520,7 +501,8 @@ RUN apt-get update && \
         libboost-regex1.74-dev \
         libboost-serialization1.74-dev \
         libboost-system1.74-dev \
-        libeigen3-dev
+        libeigen3-dev \
+        libfreetype6-dev
 
 ENV PATH "/usr/local/pgsql/bin/:/usr/local/pgsql/:$PATH"
 RUN wget https://github.com/rdkit/rdkit/archive/refs/tags/Release_2023_03_3.tar.gz -O rdkit.tar.gz && \
@@ -545,8 +527,6 @@ RUN wget https://github.com/rdkit/rdkit/archive/refs/tags/Release_2023_03_3.tar.
         -D PostgreSQL_TYPE_INCLUDE_DIR=`pg_config --includedir-server` \
         -D PostgreSQL_LIBRARY_DIR=`pg_config --libdir` \
         -D RDK_INSTALL_INTREE=OFF \
-        -D RDK_INSTALL_COMIC_FONTS=OFF \
-        -D RDK_BUILD_FREETYPE_SUPPORT=OFF \
         -D CMAKE_BUILD_TYPE=Release \
         . && \
     make -j $(getconf _NPROCESSORS_ONLN) && \
@@ -587,23 +567,6 @@ RUN wget https://github.com/ChenHuajun/pg_roaringbitmap/archive/refs/tags/v0.5.4
     make -j $(getconf _NPROCESSORS_ONLN) install && \
     echo 'trusted = true' >> /usr/local/pgsql/share/extension/roaringbitmap.control
 
-#########################################################################################
-#
-# Layer "pg-semver-pg-build"
-# compile pg_semver extension
-#
-#########################################################################################
-FROM build-deps AS pg-semver-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-ENV PATH "/usr/local/pgsql/bin/:$PATH"
-RUN wget https://github.com/theory/pg-semver/archive/refs/tags/v0.32.1.tar.gz -O pg_semver.tar.gz && \
-    echo "fbdaf7512026d62eec03fad8687c15ed509b6ba395bff140acd63d2e4fbe25d7 pg_semver.tar.gz" | sha256sum --check && \
-    mkdir pg_semver-src && cd pg_semver-src && tar xvzf ../pg_semver.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/semver.control
-
 #########################################################################################
 #
 # Layer "pg-embedding-pg-build"
@@ -613,7 +576,6 @@ RUN wget https://github.com/theory/pg-semver/archive/refs/tags/v0.32.1.tar.gz -O
 FROM build-deps AS pg-embedding-pg-build
 COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
 
-ARG PG_VERSION
 ENV PATH "/usr/local/pgsql/bin/:$PATH"
 RUN case "${PG_VERSION}" in \
       "v14" | "v15") \
@@ -639,8 +601,8 @@ FROM build-deps AS pg-anon-pg-build
 COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
 
 ENV PATH "/usr/local/pgsql/bin/:$PATH"
-RUN wget  https://github.com/neondatabase/postgresql_anonymizer/archive/refs/tags/neon_1.1.1.tar.gz -O pg_anon.tar.gz && \
-    echo "321ea8d5c1648880aafde850a2c576e4a9e7b9933a34ce272efc839328999fa9  pg_anon.tar.gz" | sha256sum --check && \
+RUN wget https://gitlab.com/dalibo/postgresql_anonymizer/-/archive/1.1.0/postgresql_anonymizer-1.1.0.tar.gz -O pg_anon.tar.gz && \
+    echo "08b09d2ff9b962f96c60db7e6f8e79cf7253eb8772516998fc35ece08633d3ad pg_anon.tar.gz" | sha256sum --check && \
     mkdir pg_anon-src && cd pg_anon-src && tar xvzf ../pg_anon.tar.gz --strip-components=1 -C . && \
     find /usr/local/pgsql -type f | sed 's|^/usr/local/pgsql/||' > /before.txt &&\
     make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
@@ -752,57 +714,6 @@ RUN wget https://github.com/pksunkara/pgx_ulid/archive/refs/tags/v0.1.3.tar.gz -
     cargo pgrx install --release && \
     echo "trusted = true" >> /usr/local/pgsql/share/extension/ulid.control
 
-#########################################################################################
-#
-# Layer "wal2json-build"
-# Compile "wal2json" extension
-#
-#########################################################################################
-
-FROM build-deps AS wal2json-pg-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-ENV PATH "/usr/local/pgsql/bin/:$PATH"
-RUN wget https://github.com/eulerto/wal2json/archive/refs/tags/wal2json_2_5.tar.gz && \
-    echo "b516653575541cf221b99cf3f8be9b6821f6dbcfc125675c85f35090f824f00e wal2json_2_5.tar.gz" | sha256sum --check && \
-    mkdir wal2json-src && cd wal2json-src && tar xvzf ../wal2json_2_5.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install
-
-#########################################################################################
-#
-# Layer "pg_ivm"
-# compile pg_ivm extension
-#
-#########################################################################################
-FROM build-deps AS pg-ivm-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-ENV PATH "/usr/local/pgsql/bin/:$PATH"
-RUN wget https://github.com/sraoss/pg_ivm/archive/refs/tags/v1.7.tar.gz -O pg_ivm.tar.gz && \
-    echo "ebfde04f99203c7be4b0e873f91104090e2e83e5429c32ac242d00f334224d5e pg_ivm.tar.gz" | sha256sum --check && \
-    mkdir pg_ivm-src && cd pg_ivm-src && tar xvzf ../pg_ivm.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_ivm.control
-
-#########################################################################################
-#
-# Layer "pg_partman"
-# compile pg_partman extension
-#
-#########################################################################################
-FROM build-deps AS pg-partman-build
-COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
-
-ENV PATH "/usr/local/pgsql/bin/:$PATH"
-RUN wget https://github.com/pgpartman/pg_partman/archive/refs/tags/v5.0.1.tar.gz -O pg_partman.tar.gz && \
-    echo "75b541733a9659a6c90dbd40fccb904a630a32880a6e3044d0c4c5f4c8a65525 pg_partman.tar.gz" | sha256sum --check && \
-    mkdir pg_partman-src && cd pg_partman-src && tar xvzf ../pg_partman.tar.gz --strip-components=1 -C . && \
-    make -j $(getconf _NPROCESSORS_ONLN) && \
-    make -j $(getconf _NPROCESSORS_ONLN) install && \
-    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_partman.control
-
 #########################################################################################
 #
 # Layer "neon-pg-ext-build"
@@ -810,8 +721,6 @@ RUN wget https://github.com/pgpartman/pg_partman/archive/refs/tags/v5.0.1.tar.gz
 #
 #########################################################################################
 FROM build-deps AS neon-pg-ext-build
-ARG PG_VERSION
-
 # Public extensions
 COPY --from=postgis-build /usr/local/pgsql/ /usr/local/pgsql/
 COPY --from=postgis-build /sfcgal/* /
@@ -840,12 +749,7 @@ COPY --from=pg-pgx-ulid-build /usr/local/pgsql/ /usr/local/pgsql/
 COPY --from=rdkit-pg-build /usr/local/pgsql/ /usr/local/pgsql/
 COPY --from=pg-uuidv7-pg-build /usr/local/pgsql/ /usr/local/pgsql/
 COPY --from=pg-roaringbitmap-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-semver-pg-build /usr/local/pgsql/ /usr/local/pgsql/
 COPY --from=pg-embedding-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=wal2json-pg-build /usr/local/pgsql /usr/local/pgsql
-COPY --from=pg-anon-pg-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-ivm-build /usr/local/pgsql/ /usr/local/pgsql/
-COPY --from=pg-partman-build /usr/local/pgsql/ /usr/local/pgsql/
 COPY pgxn/ pgxn/
 
 RUN make -j $(getconf _NPROCESSORS_ONLN) \
@@ -856,10 +760,6 @@ RUN make -j $(getconf _NPROCESSORS_ONLN) \
         PG_CONFIG=/usr/local/pgsql/bin/pg_config \
         -C pgxn/neon_utils \
         -s install && \
-    make -j $(getconf _NPROCESSORS_ONLN) \
-        PG_CONFIG=/usr/local/pgsql/bin/pg_config \
-        -C pgxn/neon_test_utils \
-        -s install && \
     make -j $(getconf _NPROCESSORS_ONLN) \
         PG_CONFIG=/usr/local/pgsql/bin/pg_config \
         -C pgxn/neon_rmgr \
@@ -891,17 +791,7 @@ ENV BUILD_TAG=$BUILD_TAG
 USER nonroot
 # Copy entire project to get Cargo.* files with proper dependencies for the whole project
 COPY --chown=nonroot . .
-RUN cd compute_tools && mold -run cargo build --locked --profile release-line-debug-size-lto
-
-#########################################################################################
-#
-# Final compute-tools image
-#
-#########################################################################################
-
-FROM debian:bullseye-slim AS compute-tools-image
-
-COPY --from=compute-tools /home/nonroot/target/release-line-debug-size-lto/compute_ctl /usr/local/bin/compute_ctl
+RUN cd compute_tools && cargo build --locked --profile release-line-debug-size-lto
 
 #########################################################################################
 #
@@ -933,10 +823,8 @@ FROM debian:bullseye-slim
 RUN mkdir /var/db && useradd -m -d /var/db/postgres postgres && \
     echo "postgres:test_console_pass" | chpasswd && \
     mkdir /var/db/postgres/compute && mkdir /var/db/postgres/specs && \
-    mkdir /var/db/postgres/pgbouncer && \
     chown -R postgres:postgres /var/db/postgres && \
     chmod 0750 /var/db/postgres/compute && \
-    chmod 0750 /var/db/postgres/pgbouncer && \
     echo '/usr/local/lib' >> /etc/ld.so.conf && /sbin/ldconfig && \
     # create folder for file cache
     mkdir -p -m 777 /neon/cache
@@ -944,9 +832,6 @@ RUN mkdir /var/db && useradd -m -d /var/db/postgres postgres && \
 COPY --from=postgres-cleanup-layer --chown=postgres /usr/local/pgsql /usr/local
 COPY --from=compute-tools --chown=postgres /home/nonroot/target/release-line-debug-size-lto/compute_ctl /usr/local/bin/compute_ctl
 
-# Create remote extension download directory
-RUN mkdir /usr/local/download_extensions && chown -R postgres:postgres /usr/local/download_extensions
-
 # Install:
 # libreadline8 for psql
 # libicu67, locales for collations (including ICU and plpgsql_check)
@@ -955,7 +840,7 @@ RUN mkdir /usr/local/download_extensions && chown -R postgres:postgres /usr/loca
 # libgeos, libgdal, libsfcgal1, libproj and libprotobuf-c1 for PostGIS
 # libxml2, libxslt1.1 for xml2
 # libzstd1 for zstd
-# libboost* for rdkit
+# libboost*, libfreetype6, and zlib1g for rdkit
 # ca-certificates for communicating with s3 by compute_ctl
 RUN apt update &&  \
     apt install --no-install-recommends -y \
@@ -968,6 +853,7 @@ RUN apt update &&  \
         libboost-serialization1.74.0 \
         libboost-system1.74.0 \
         libossp-uuid16 \
+        libfreetype6 \
         libgeos-c1v5 \
         libgdal28 \
         libproj19 \
@@ -979,6 +865,7 @@ RUN apt update &&  \
         libcurl4-openssl-dev \
         locales \
         procps \
+        zlib1g \
         ca-certificates && \
     rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* && \
     localedef -i en_US -c -f UTF-8 -A /usr/share/locale/locale.alias en_US.UTF-8

Dockerfile.compute-tools

@@ -0,0 +1,32 @@
+# First transient image to build compute_tools binaries
+# NB: keep in sync with rust image version in .github/workflows/build_and_test.yml
+ARG REPOSITORY=neondatabase
+ARG IMAGE=rust
+ARG TAG=pinned
+ARG BUILD_TAG
+
+FROM $REPOSITORY/$IMAGE:$TAG AS rust-build
+WORKDIR /home/nonroot
+
+# Enable https://github.com/paritytech/cachepot to cache Rust crates' compilation results in Docker builds.
+# Set up cachepot to use an AWS S3 bucket for cache results, to reuse it between `docker build` invocations.
+# cachepot falls back to local filesystem if S3 is misconfigured, not failing the build.
+ARG RUSTC_WRAPPER=cachepot
+ENV AWS_REGION=eu-central-1
+ENV CACHEPOT_S3_KEY_PREFIX=cachepot
+ARG CACHEPOT_BUCKET=neon-github-dev
+#ARG AWS_ACCESS_KEY_ID
+#ARG AWS_SECRET_ACCESS_KEY
+ARG BUILD_TAG
+ENV BUILD_TAG=$BUILD_TAG
+
+COPY . .
+
+RUN set -e \
+    && mold -run cargo build -p compute_tools --locked --release \
+    && cachepot -s
+
+# Final image that only has one binary
+FROM debian:bullseye-slim
+
+COPY --from=rust-build /home/nonroot/target/release/compute_ctl /usr/local/bin/compute_ctl

Makefile

@@ -51,8 +51,6 @@ CARGO_BUILD_FLAGS += $(filter -j1,$(MAKEFLAGS))
 CARGO_CMD_PREFIX += $(if $(filter n,$(MAKEFLAGS)),,+)
 # Force cargo not to print progress bar
 CARGO_CMD_PREFIX += CARGO_TERM_PROGRESS_WHEN=never CI=1
-# Set PQ_LIB_DIR to make sure `storage_controller` get linked with bundled libpq (through diesel)
-CARGO_CMD_PREFIX += PQ_LIB_DIR=$(POSTGRES_INSTALL_DIR)/v16/lib
 
 #
 # Top level Makefile to build Neon and PostgreSQL
@@ -74,10 +72,6 @@ neon: postgres-headers walproposer-lib
 #
 $(POSTGRES_INSTALL_DIR)/build/%/config.status:
 	+@echo "Configuring Postgres $* build"
-	@test -s $(ROOT_PROJECT_DIR)/vendor/postgres-$*/configure || { \
-		echo "\nPostgres submodule not found in $(ROOT_PROJECT_DIR)/vendor/postgres-$*/, execute "; \
-		echo "'git submodule update --init --recursive --depth 2 --progress .' in project root.\n"; \
-		exit 1; }
 	mkdir -p $(POSTGRES_INSTALL_DIR)/build/$*
 	(cd $(POSTGRES_INSTALL_DIR)/build/$* && \
 	env PATH="$(EXTRA_PATH_OVERRIDES):$$PATH" $(ROOT_PROJECT_DIR)/vendor/postgres-$*/configure \
@@ -159,8 +153,8 @@ neon-pg-ext-%: postgres-%
 		-C $(POSTGRES_INSTALL_DIR)/build/neon-utils-$* \
 		-f $(ROOT_PROJECT_DIR)/pgxn/neon_utils/Makefile install
 
-.PHONY: neon-pg-clean-ext-%
-neon-pg-clean-ext-%:
+.PHONY: neon-pg-ext-clean-%
+neon-pg-ext-clean-%:
 	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
 	-C $(POSTGRES_INSTALL_DIR)/build/neon-$* \
 	-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile clean
@@ -176,10 +170,10 @@ neon-pg-clean-ext-%:
 
 # Build walproposer as a static library. walproposer source code is located
 # in the pgxn/neon directory.
-#
+# 
 # We also need to include libpgport.a and libpgcommon.a, because walproposer
 # uses some functions from those libraries.
-#
+# 
 # Some object files are removed from libpgport.a and libpgcommon.a because
 # they depend on openssl and other libraries that are not included in our
 # Rust build.
@@ -216,11 +210,11 @@ neon-pg-ext: \
 	neon-pg-ext-v15 \
 	neon-pg-ext-v16
 
-.PHONY: neon-pg-clean-ext
-neon-pg-clean-ext: \
-	neon-pg-clean-ext-v14 \
-	neon-pg-clean-ext-v15 \
-	neon-pg-clean-ext-v16
+.PHONY: neon-pg-ext-clean
+neon-pg-ext-clean: \
+	neon-pg-ext-clean-v14 \
+	neon-pg-ext-clean-v15 \
+	neon-pg-ext-clean-v16
 
 # shorthand to build all Postgres versions
 .PHONY: postgres
@@ -249,7 +243,7 @@ postgres-check: \
 
 # This doesn't remove the effects of 'configure'.
 .PHONY: clean
-clean: postgres-clean neon-pg-clean-ext
+clean: postgres-clean neon-pg-ext-clean
 	$(CARGO_CMD_PREFIX) cargo clean
 
 # This removes everything
@@ -262,44 +256,6 @@ distclean:
 fmt:
 	./pre-commit.py --fix-inplace
 
-postgres-%-pg-bsd-indent: postgres-%
-	+@echo "Compiling pg_bsd_indent"
-	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/tools/pg_bsd_indent/
-
-# Create typedef list for the core. Note that generally it should be combined with
-# buildfarm one to cover platform specific stuff.
-# https://wiki.postgresql.org/wiki/Running_pgindent_on_non-core_code_or_development_code
-postgres-%-typedefs.list: postgres-%
-	$(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/tools/find_typedef $(POSTGRES_INSTALL_DIR)/$*/bin > $@
-
-# Indent postgres. See src/tools/pgindent/README for details.
-.PHONY: postgres-%-pgindent
-postgres-%-pgindent: postgres-%-pg-bsd-indent postgres-%-typedefs.list
-	+@echo merge with buildfarm typedef to cover all platforms
-	+@echo note: I first tried to download from pgbuildfarm.org, but for unclear reason e.g. \
-		REL_16_STABLE list misses PGSemaphoreData
-	# wget -q -O - "http://www.pgbuildfarm.org/cgi-bin/typedefs.pl?branch=REL_16_STABLE" |\
-	# cat - postgres-$*-typedefs.list | sort | uniq > postgres-$*-typedefs-full.list
-	cat $(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/tools/pgindent/typedefs.list |\
-		cat - postgres-$*-typedefs.list | sort | uniq > postgres-$*-typedefs-full.list
-	+@echo note: you might want to run it on selected files/dirs instead.
-	INDENT=$(POSTGRES_INSTALL_DIR)/build/$*/src/tools/pg_bsd_indent/pg_bsd_indent \
-		$(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/tools/pgindent/pgindent --typedefs postgres-$*-typedefs-full.list \
-		$(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/ \
-		--excludes $(ROOT_PROJECT_DIR)/vendor/postgres-$*/src/tools/pgindent/exclude_file_patterns
-	rm -f pg*.BAK
-
-# Indent pxgn/neon.
-.PHONY: pgindent
-neon-pgindent: postgres-v16-pg-bsd-indent neon-pg-ext-v16
-	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/v16/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
-		FIND_TYPEDEF=$(ROOT_PROJECT_DIR)/vendor/postgres-v16/src/tools/find_typedef \
-		INDENT=$(POSTGRES_INSTALL_DIR)/build/v16/src/tools/pg_bsd_indent/pg_bsd_indent \
-		PGINDENT_SCRIPT=$(ROOT_PROJECT_DIR)/vendor/postgres-v16/src/tools/pgindent/pgindent \
-		-C $(POSTGRES_INSTALL_DIR)/build/neon-v16 \
-		-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile pgindent
-
-
 .PHONY: setup-pre-commit-hook
 setup-pre-commit-hook:
 	ln -s -f $(ROOT_PROJECT_DIR)/pre-commit.py .git/hooks/pre-commit

NOTICE

@@ -1,5 +1,5 @@
 Neon
-Copyright 2022 - 2024 Neon Inc.
+Copyright 2022 Neon Inc.
 
 The PostgreSQL submodules in vendor/ are licensed under the PostgreSQL license.
 See vendor/postgres-vX/COPYRIGHT for details.

README.md

@@ -5,7 +5,7 @@
 Neon is a serverless open-source alternative to AWS Aurora Postgres. It separates storage and compute and substitutes the PostgreSQL storage layer by redistributing data across a cluster of nodes.
 
 ## Quick start
-Try the [Neon Free Tier](https://neon.tech/github) to create a serverless Postgres instance. Then connect to it with your preferred Postgres client (psql, dbeaver, etc) or use the online [SQL Editor](https://neon.tech/docs/get-started-with-neon/query-with-neon-sql-editor/). See [Connect from any application](https://neon.tech/docs/connect/connect-from-any-app/) for connection instructions.
+Try the [Neon Free Tier](https://neon.tech/docs/introduction/technical-preview-free-tier/) to create a serverless Postgres instance. Then connect to it with your preferred Postgres client (psql, dbeaver, etc) or use the online [SQL Editor](https://neon.tech/docs/get-started-with-neon/query-with-neon-sql-editor/). See [Connect from any application](https://neon.tech/docs/connect/connect-from-any-app/) for connection instructions.
 
 Alternatively, compile and run the project [locally](#running-local-installation).
 
@@ -14,8 +14,8 @@ Alternatively, compile and run the project [locally](#running-local-installation
 A Neon installation consists of compute nodes and the Neon storage engine. Compute nodes are stateless PostgreSQL nodes backed by the Neon storage engine.
 
 The Neon storage engine consists of two major components:
-- Pageserver: Scalable storage backend for the compute nodes.
-- Safekeepers: The safekeepers form a redundant WAL service that received WAL from the compute node, and stores it durably until it has been processed by the pageserver and uploaded to cloud storage.
+- Pageserver. Scalable storage backend for the compute nodes.
+- Safekeepers. The safekeepers form a redundant WAL service that received WAL from the compute node, and stores it durably until it has been processed by the pageserver and uploaded to cloud storage.
 
 See developer documentation in [SUMMARY.md](/docs/SUMMARY.md) for more information.
 
@@ -29,14 +29,13 @@ See developer documentation in [SUMMARY.md](/docs/SUMMARY.md) for more informati
 ```bash
 apt install build-essential libtool libreadline-dev zlib1g-dev flex bison libseccomp-dev \
 libssl-dev clang pkg-config libpq-dev cmake postgresql-client protobuf-compiler \
-libcurl4-openssl-dev openssl python3-poetry lsof libicu-dev
+libcurl4-openssl-dev openssl python-poetry lsof libicu-dev
 ```
 * On Fedora, these packages are needed:
 ```bash
 dnf install flex bison readline-devel zlib-devel openssl-devel \
   libseccomp-devel perl clang cmake postgresql postgresql-contrib protobuf-compiler \
-  protobuf-devel libcurl-devel openssl poetry lsof libicu-devel libpq-devel python3-devel \
-  libffi-devel
+  protobuf-devel libcurl-devel openssl poetry lsof libicu-devel
 ```
 * On Arch based systems, these packages are needed:
 ```bash
@@ -81,9 +80,9 @@ The project uses [rust toolchain file](./rust-toolchain.toml) to define the vers
 
 This file is automatically picked up by [`rustup`](https://rust-lang.github.io/rustup/overrides.html#the-toolchain-file) that installs (if absent) and uses the toolchain version pinned in the file.
 
-rustup users who want to build with another toolchain can use the [`rustup override`](https://rust-lang.github.io/rustup/overrides.html#directory-overrides) command to set a specific toolchain for the project's directory.
+rustup users who want to build with another toolchain can use [`rustup override`](https://rust-lang.github.io/rustup/overrides.html#directory-overrides) command to set a specific toolchain for the project's directory.
 
-non-rustup users most probably are not getting the same toolchain automatically from the file, so are responsible to manually verify that their toolchain matches the version in the file.
+non-rustup users most probably are not getting the same toolchain automatically from the file, so are responsible to manually verify their toolchain matches the version in the file.
 Newer rustc versions most probably will work fine, yet older ones might not be supported due to some new features used by the project or the crates.
 
 #### Building on Linux
@@ -124,7 +123,7 @@ make -j`sysctl -n hw.logicalcpu` -s
 To run the `psql` client, install the `postgresql-client` package or modify `PATH` and `LD_LIBRARY_PATH` to include `pg_install/bin` and `pg_install/lib`, respectively.
 
 To run the integration tests or Python scripts (not required to use the code), install
-Python (3.9 or higher), and install the python3 packages using `./scripts/pysync` (requires [poetry>=1.3](https://python-poetry.org/)) in the project directory.
+Python (3.9 or higher), and install python3 packages using `./scripts/pysync` (requires [poetry>=1.3](https://python-poetry.org/)) in the project directory.
 
 
 #### Running neon database
@@ -150,9 +149,6 @@ tenant 9ef87a5bf0d92544f6fafeeb3239695c successfully created on the pageserver
 Created an initial timeline 'de200bd42b49cc1814412c7e592dd6e9' at Lsn 0/16B5A50 for tenant: 9ef87a5bf0d92544f6fafeeb3239695c
 Setting tenant 9ef87a5bf0d92544f6fafeeb3239695c as a default one
 
-# create postgres compute node
-> cargo neon endpoint create main
-
 # start postgres compute node
 > cargo neon endpoint start main
 Starting new endpoint main (PostgreSQL v14) on timeline de200bd42b49cc1814412c7e592dd6e9 ...
@@ -166,7 +162,7 @@ Starting postgres at 'postgresql://cloud_admin@127.0.0.1:55432/postgres'
 
 2. Now, it is possible to connect to postgres and run some queries:
 ```text
-> psql -p 55432 -h 127.0.0.1 -U cloud_admin postgres
+> psql -p55432 -h 127.0.0.1 -U cloud_admin postgres
 postgres=# CREATE TABLE t(key int primary key, value text);
 CREATE TABLE
 postgres=# insert into t values(1,1);
@@ -189,11 +185,8 @@ Created timeline 'b3b863fa45fa9e57e615f9f2d944e601' at Lsn 0/16F9A00 for tenant:
 (L) main [de200bd42b49cc1814412c7e592dd6e9]
 (L) ┗━ @0/16F9A00: migration_check [b3b863fa45fa9e57e615f9f2d944e601]
 
-# create postgres on that branch
-> cargo neon endpoint create migration_check --branch-name migration_check
-
 # start postgres on that branch
-> cargo neon endpoint start migration_check
+> cargo neon endpoint start migration_check --branch-name migration_check
 Starting new endpoint migration_check (PostgreSQL v14) on timeline b3b863fa45fa9e57e615f9f2d944e601 ...
 Starting postgres at 'postgresql://cloud_admin@127.0.0.1:55434/postgres'
 
@@ -205,7 +198,7 @@ Starting postgres at 'postgresql://cloud_admin@127.0.0.1:55434/postgres'
 
 # this new postgres instance will have all the data from 'main' postgres,
 # but all modifications would not affect data in original postgres
-> psql -p 55434 -h 127.0.0.1 -U cloud_admin postgres
+> psql -p55434 -h 127.0.0.1 -U cloud_admin postgres
 postgres=# select * from t;
  key | value
 -----+-------
@@ -216,7 +209,7 @@ postgres=# insert into t values(2,2);
 INSERT 0 1
 
 # check that the new change doesn't affect the 'main' postgres
-> psql -p 55432 -h 127.0.0.1 -U cloud_admin postgres
+> psql -p55432 -h 127.0.0.1 -U cloud_admin postgres
 postgres=# select * from t;
  key | value
 -----+-------
@@ -224,28 +217,14 @@ postgres=# select * from t;
 (1 row)
 ```
 
-4. If you want to run tests afterwards (see below), you must stop all the running pageserver, safekeeper, and postgres instances
+4. If you want to run tests afterward (see below), you must stop all the running of the pageserver, safekeeper, and postgres instances
    you have just started. You can terminate them all with one command:
 ```sh
 > cargo neon stop
 ```
 
-More advanced usages can be found at [Control Plane and Neon Local](./control_plane/README.md).
-
-#### Handling build failures
-
-If you encounter errors during setting up the initial tenant, it's best to stop everything (`cargo neon stop`) and remove the `.neon` directory. Then fix the problems, and start the setup again.
-
 ## Running tests
 
-### Rust unit tests
-
-We are using [`cargo-nextest`](https://nexte.st/) to run the tests in Github Workflows.
-Some crates do not support running plain `cargo test` anymore, prefer `cargo nextest run` instead.
-You can install `cargo-nextest` with `cargo install cargo-nextest`.
-
-### Integration tests
-
 Ensure your dependencies are installed as described [here](https://github.com/neondatabase/neon#dependency-installation-notes).
 
 ```sh
@@ -257,28 +236,12 @@ CARGO_BUILD_FLAGS="--features=testing" make
 ```
 
 By default, this runs both debug and release modes, and all supported postgres versions. When
-testing locally, it is convenient to run just one set of permutations, like this:
+testing locally, it is convenient to run just run one set of permutations, like this:
 
 ```sh
 DEFAULT_PG_VERSION=15 BUILD_TYPE=release ./scripts/pytest
 ```
 
-## Flamegraphs
-
-You may find yourself in need of flamegraphs for software in this repository.
-You can use [`flamegraph-rs`](https://github.com/flamegraph-rs/flamegraph) or the original [`flamegraph.pl`](https://github.com/brendangregg/FlameGraph). Your choice!
-
->[!IMPORTANT]
-> If you're using `lld` or `mold`, you need the `--no-rosegment` linker argument.
-> It's a [general thing with Rust / lld / mold](https://crbug.com/919499#c16), not specific to this repository.
-> See [this PR for further instructions](https://github.com/neondatabase/neon/pull/6764).
-
-## Cleanup
-
-For cleaning up the source tree from build artifacts, run `make clean` in the source directory.
-
-For removing every artifact from build and configure steps, run `make distclean`, and also consider removing the cargo binaries in the `target` directory, as well as the database in the `.neon` directory. Note that removing the `.neon` directory will remove your database, with all data in it. You have been warned!
-
 ## Documentation
 
 [docs](/docs) Contains a top-level overview of all available markdown documentation.

clippy.toml

@@ -2,13 +2,4 @@ disallowed-methods = [
     "tokio::task::block_in_place",
     # Allow this for now, to deny it later once we stop using Handle::block_on completely
     # "tokio::runtime::Handle::block_on",
-    # use tokio_epoll_uring_ext instead
-    "tokio_epoll_uring::thread_local_system",
-]
-
-disallowed-macros = [
-    # use std::pin::pin
-    "futures::pin_mut",
-    # cannot disallow this, because clippy finds used from tokio macros
-    #"tokio::pin",
 ]

compute_tools/Cargo.toml

@@ -13,7 +13,6 @@ clap.workspace = true
 flate2.workspace = true
 futures.workspace = true
 hyper = { workspace = true, features = ["full"] }
-nix.workspace = true
 notify.workspace = true
 num_cpus.workspace = true
 opentelemetry.workspace = true
@@ -21,7 +20,6 @@ postgres.workspace = true
 regex.workspace = true
 serde.workspace = true
 serde_json.workspace = true
-signal-hook.workspace = true
 tar.workspace = true
 reqwest = { workspace = true, features = ["json"] }
 tokio = { workspace = true, features = ["rt", "rt-multi-thread"] }
@@ -39,6 +37,4 @@ workspace_hack.workspace = true
 toml_edit.workspace = true
 remote_storage = { version = "0.1", path = "../libs/remote_storage/" }
 vm_monitor = { version = "0.1", path = "../libs/vm_monitor/" }
-zstd = "0.13"
-bytes = "1.0"
-rust-ini = "0.20.0"
+zstd = "0.12.4"

compute_tools/README.md

@@ -32,29 +32,6 @@ compute_ctl -D /var/db/postgres/compute \
             -b /usr/local/bin/postgres
 ```
 
-## State Diagram
-
-Computes can be in various states. Below is a diagram that details how a
-compute moves between states.
-
-```mermaid
-%% https://mermaid.js.org/syntax/stateDiagram.html
-stateDiagram-v2
-  [*] --> Empty : Compute spawned
-  Empty --> ConfigurationPending : Waiting for compute spec
-  ConfigurationPending --> Configuration : Received compute spec
-  Configuration --> Failed : Failed to configure the compute
-  Configuration --> Running : Compute has been configured
-  Empty --> Init : Compute spec is immediately available
-  Empty --> TerminationPending : Requested termination
-  Init --> Failed : Failed to start Postgres
-  Init --> Running : Started Postgres
-  Running --> TerminationPending : Requested termination
-  TerminationPending --> Terminated : Terminated compute
-  Failed --> [*] : Compute exited
-  Terminated --> [*] : Compute exited
-```
-
 ## Tests
 
 Cargo formatter:

compute_tools/src/bin/compute_ctl.rs

@@ -31,32 +31,27 @@
 //!             -C 'postgresql://cloud_admin@localhost/postgres' \
 //!             -S /var/db/postgres/specs/current.json \
 //!             -b /usr/local/bin/postgres \
-//!             -r http://pg-ext-s3-gateway \
+//!             -r {"bucket": "neon-dev-extensions-eu-central-1", "region": "eu-central-1"}
 //! ```
 //!
 use std::collections::HashMap;
 use std::fs::File;
 use std::path::Path;
 use std::process::exit;
-use std::sync::atomic::Ordering;
 use std::sync::{mpsc, Arc, Condvar, Mutex, RwLock};
 use std::{thread, time::Duration};
 
 use anyhow::{Context, Result};
 use chrono::Utc;
 use clap::Arg;
-use signal_hook::consts::{SIGQUIT, SIGTERM};
-use signal_hook::{consts::SIGINT, iterator::Signals};
 use tracing::{error, info};
 use url::Url;
 
 use compute_api::responses::ComputeStatus;
 
-use compute_tools::compute::{
-    forward_termination_signal, ComputeNode, ComputeState, ParsedSpec, PG_PID,
-};
+use compute_tools::compute::{ComputeNode, ComputeState, ParsedSpec};
 use compute_tools::configurator::launch_configurator;
-use compute_tools::extension_server::get_pg_version;
+use compute_tools::extension_server::{get_pg_version, init_remote_storage};
 use compute_tools::http::api::launch_http_server;
 use compute_tools::logger::*;
 use compute_tools::monitor::launch_monitor;
@@ -65,18 +60,11 @@ use compute_tools::spec::*;
 
 // this is an arbitrary build tag. Fine as a default / for testing purposes
 // in-case of not-set environment var
-const BUILD_TAG_DEFAULT: &str = "latest";
+const BUILD_TAG_DEFAULT: &str = "5670669815";
 
 fn main() -> Result<()> {
     init_tracing_and_logging(DEFAULT_LOG_LEVEL)?;
 
-    let mut signals = Signals::new([SIGINT, SIGTERM, SIGQUIT])?;
-    thread::spawn(move || {
-        for sig in signals.forever() {
-            handle_exit_signal(sig);
-        }
-    });
-
     let build_tag = option_env!("BUILD_TAG")
         .unwrap_or(BUILD_TAG_DEFAULT)
         .to_string();
@@ -86,18 +74,10 @@ fn main() -> Result<()> {
     let pgbin_default = String::from("postgres");
     let pgbin = matches.get_one::<String>("pgbin").unwrap_or(&pgbin_default);
 
-    let ext_remote_storage = matches
-        .get_one::<String>("remote-ext-config")
-        // Compatibility hack: if the control plane specified any remote-ext-config
-        // use the default value for extension storage proxy gateway.
-        // Remove this once the control plane is updated to pass the gateway URL
-        .map(|conf| {
-            if conf.starts_with("http") {
-                conf.trim_end_matches('/')
-            } else {
-                "http://pg-ext-s3-gateway"
-            }
-        });
+    let remote_ext_config = matches.get_one::<String>("remote-ext-config");
+    let ext_remote_storage = remote_ext_config.map(|x| {
+        init_remote_storage(x).expect("cannot initialize remote extension storage from config")
+    });
 
     let http_port = *matches
         .get_one::<u16>("http-port")
@@ -176,7 +156,6 @@ fn main() -> Result<()> {
                 let path = Path::new(sp);
                 let file = File::open(path)?;
                 spec = Some(serde_json::from_reader(file)?);
-                live_config_allowed = true;
             } else if let Some(id) = compute_id {
                 if let Some(cp_base) = control_plane_uri {
                     live_config_allowed = true;
@@ -218,16 +197,16 @@ fn main() -> Result<()> {
         live_config_allowed,
         state: Mutex::new(new_state),
         state_changed: Condvar::new(),
-        ext_remote_storage: ext_remote_storage.map(|s| s.to_string()),
+        ext_remote_storage,
         ext_download_progress: RwLock::new(HashMap::new()),
         build_tag,
     };
     let compute = Arc::new(compute_node);
 
     // If this is a pooled VM, prewarm before starting HTTP server and becoming
-    // available for binding. Prewarming helps Postgres start quicker later,
+    // available for binding. Prewarming helps postgres start quicker later,
     // because QEMU will already have it's memory allocated from the host, and
-    // the necessary binaries will already be cached.
+    // the necessary binaries will alreaady be cached.
     if !spec_set {
         compute.prewarm_postgres()?;
     }
@@ -270,11 +249,6 @@ fn main() -> Result<()> {
 
     state.status = ComputeStatus::Init;
     compute.state_changed.notify_all();
-
-    info!(
-        "running compute with features: {:?}",
-        state.pspec.as_ref().unwrap().spec.features
-    );
     drop(state);
 
     // Launch remaining service threads
@@ -287,17 +261,11 @@ fn main() -> Result<()> {
     let pg = match compute.start_compute(extension_server_port) {
         Ok(pg) => Some(pg),
         Err(err) => {
-            error!("could not start the compute node: {:#}", err);
+            error!("could not start the compute node: {:?}", err);
             let mut state = compute.state.lock().unwrap();
             state.error = Some(format!("{:?}", err));
             state.status = ComputeStatus::Failed;
-            // Notify others that Postgres failed to start. In case of configuring the
-            // empty compute, it's likely that API handler is still waiting for compute
-            // state change. With this we will notify it that compute is in Failed state,
-            // so control plane will know about it earlier and record proper error instead
-            // of timeout.
-            compute.state_changed.notify_all();
-            drop(state); // unlock
+            drop(state);
             delay_exit = true;
             None
         }
@@ -309,26 +277,32 @@ fn main() -> Result<()> {
         if #[cfg(target_os = "linux")] {
             use std::env;
             use tokio_util::sync::CancellationToken;
-            let vm_monitor_addr = matches
-                .get_one::<String>("vm-monitor-addr")
-                .expect("--vm-monitor-addr should always be set because it has a default arg");
+            use tracing::warn;
+            let vm_monitor_addr = matches.get_one::<String>("vm-monitor-addr");
             let file_cache_connstr = matches.get_one::<String>("filecache-connstr");
             let cgroup = matches.get_one::<String>("cgroup");
+            let file_cache_on_disk = matches.get_flag("file-cache-on-disk");
 
             // Only make a runtime if we need to.
             // Note: it seems like you can make a runtime in an inner scope and
             // if you start a task in it it won't be dropped. However, make it
             // in the outermost scope just to be safe.
-            let rt = if env::var_os("AUTOSCALING").is_some() {
-                Some(
+            let rt = match (env::var_os("AUTOSCALING"), vm_monitor_addr) {
+                (None, None) => None,
+                (None, Some(_)) => {
+                    warn!("--vm-monitor-addr option set but AUTOSCALING env var not present");
+                    None
+                }
+                (Some(_), None) => {
+                    panic!("AUTOSCALING env var present but --vm-monitor-addr option not set")
+                }
+                (Some(_), Some(_)) => Some(
                     tokio::runtime::Builder::new_multi_thread()
                         .worker_threads(4)
                         .enable_all()
                         .build()
-                        .expect("failed to create tokio runtime for monitor")
-                )
-            } else {
-                None
+                        .expect("failed to create tokio runtime for monitor"),
+                ),
             };
 
             // This token is used internally by the monitor to clean up all threads
@@ -339,7 +313,8 @@ fn main() -> Result<()> {
                     Box::leak(Box::new(vm_monitor::Args {
                         cgroup: cgroup.cloned(),
                         pgconnstr: file_cache_connstr.cloned(),
-                        addr: vm_monitor_addr.clone(),
+                        addr: vm_monitor_addr.cloned().unwrap(),
+                        file_cache_on_disk,
                     })),
                     token.clone(),
                 ))
@@ -349,20 +324,13 @@ fn main() -> Result<()> {
 
     // Wait for the child Postgres process forever. In this state Ctrl+C will
     // propagate to Postgres and it will be shut down as well.
-    if let Some((mut pg, logs_handle)) = pg {
+    if let Some(mut pg) = pg {
         // Startup is finished, exit the startup tracing span
         drop(startup_context_guard);
 
         let ecode = pg
             .wait()
             .expect("failed to start waiting on Postgres process");
-        PG_PID.store(0, Ordering::SeqCst);
-
-        // Process has exited, so we can join the logs thread.
-        let _ = logs_handle
-            .join()
-            .map_err(|e| tracing::error!("log thread panicked: {:?}", e));
-
         info!("Postgres exited with code {}, shutting down", ecode);
         exit_code = ecode.code()
     }
@@ -395,15 +363,6 @@ fn main() -> Result<()> {
         info!("synced safekeepers at lsn {lsn}");
     }
 
-    let mut state = compute.state.lock().unwrap();
-    if state.status == ComputeStatus::TerminationPending {
-        state.status = ComputeStatus::Terminated;
-        compute.state_changed.notify_all();
-        // we were asked to terminate gracefully, don't exit to avoid restart
-        delay_exit = true
-    }
-    drop(state);
-
     if let Err(err) = compute.check_for_core_dumps() {
         error!("error while checking for core dumps: {err:?}");
     }
@@ -526,15 +485,11 @@ fn cli() -> clap::Command {
                 )
                 .value_name("FILECACHE_CONNSTR"),
         )
-}
-
-/// When compute_ctl is killed, send also termination signal to sync-safekeepers
-/// to prevent leakage. TODO: it is better to convert compute_ctl to async and
-/// wait for termination which would be easy then.
-fn handle_exit_signal(sig: i32) {
-    info!("received {sig} termination signal");
-    forward_termination_signal();
-    exit(1);
+        .arg(
+            Arg::new("file-cache-on-disk")
+                .long("file-cache-on-disk")
+                .action(clap::ArgAction::SetTrue),
+        )
 }
 
 #[test]

compute_tools/src/compute.rs

@@ -2,14 +2,11 @@ use std::collections::HashMap;
 use std::env;
 use std::fs;
 use std::io::BufRead;
-use std::os::unix::fs::{symlink, PermissionsExt};
+use std::os::unix::fs::PermissionsExt;
 use std::path::Path;
 use std::process::{Command, Stdio};
 use std::str::FromStr;
-use std::sync::atomic::AtomicU32;
-use std::sync::atomic::Ordering;
 use std::sync::{Condvar, Mutex, RwLock};
-use std::thread;
 use std::time::Instant;
 
 use anyhow::{Context, Result};
@@ -17,31 +14,25 @@ use chrono::{DateTime, Utc};
 use futures::future::join_all;
 use futures::stream::FuturesUnordered;
 use futures::StreamExt;
-use nix::unistd::Pid;
-use postgres::error::SqlState;
 use postgres::{Client, NoTls};
-use tracing::{debug, error, info, instrument, warn};
+use tokio;
+use tokio_postgres;
+use tracing::{error, info, instrument, warn};
 use utils::id::{TenantId, TimelineId};
 use utils::lsn::Lsn;
 
 use compute_api::responses::{ComputeMetrics, ComputeStatus};
-use compute_api::spec::{ComputeFeature, ComputeMode, ComputeSpec};
+use compute_api::spec::{ComputeMode, ComputeSpec};
 use utils::measured_stream::MeasuredReader;
 
-use nix::sys::signal::{kill, Signal};
-
-use remote_storage::{DownloadError, RemotePath};
+use remote_storage::{DownloadError, GenericRemoteStorage, RemotePath};
 
 use crate::checker::create_availability_check_data;
-use crate::logger::inlinify;
 use crate::pg_helpers::*;
 use crate::spec::*;
 use crate::sync_sk::{check_if_synced, ping_safekeeper};
 use crate::{config, extension_server};
 
-pub static SYNC_SAFEKEEPERS_PID: AtomicU32 = AtomicU32::new(0);
-pub static PG_PID: AtomicU32 = AtomicU32::new(0);
-
 /// Compute node info shared across several `compute_ctl` threads.
 pub struct ComputeNode {
     // Url type maintains proper escaping
@@ -68,8 +59,8 @@ pub struct ComputeNode {
     pub state: Mutex<ComputeState>,
     /// `Condvar` to allow notifying waiters about state changes.
     pub state_changed: Condvar,
-    /// the address of extension storage proxy gateway
-    pub ext_remote_storage: Option<String>,
+    ///  the S3 bucket that we search for extensions in
+    pub ext_remote_storage: Option<GenericRemoteStorage>,
     // key: ext_archive_name, value: started download time, download_completed?
     pub ext_download_progress: RwLock<HashMap<String, (DateTime<Utc>, bool)>>,
     pub build_tag: String,
@@ -209,7 +200,6 @@ fn maybe_cgexec(cmd: &str) -> Command {
 
 /// Create special neon_superuser role, that's a slightly nerfed version of a real superuser
 /// that we give to customers
-#[instrument(skip_all)]
 fn create_neon_superuser(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
     let roles = spec
         .cluster
@@ -262,7 +252,7 @@ fn create_neon_superuser(spec: &ComputeSpec, client: &mut Client) -> Result<()>
                     IF NOT EXISTS (
                         SELECT FROM pg_catalog.pg_roles WHERE rolname = 'neon_superuser')
                     THEN
-                        CREATE ROLE neon_superuser CREATEDB CREATEROLE NOLOGIN REPLICATION BYPASSRLS IN ROLE pg_read_all_data, pg_write_all_data;
+                        CREATE ROLE neon_superuser CREATEDB CREATEROLE NOLOGIN REPLICATION IN ROLE pg_read_all_data, pg_write_all_data;
                         IF array_length(roles, 1) IS NOT NULL THEN
                             EXECUTE format('GRANT neon_superuser TO %s',
                                            array_to_string(ARRAY(SELECT quote_ident(x) FROM unnest(roles) as x), ', '));
@@ -279,7 +269,7 @@ fn create_neon_superuser(spec: &ComputeSpec, client: &mut Client) -> Result<()>
             $$;"#,
         roles_decl, database_decl,
     );
-    info!("Neon superuser created: {}", inlinify(&query));
+    info!("Neon superuser created:\n{}", &query);
     client
         .simple_query(&query)
         .map_err(|e| anyhow::anyhow!(e).context(query))?;
@@ -287,17 +277,6 @@ fn create_neon_superuser(spec: &ComputeSpec, client: &mut Client) -> Result<()>
 }
 
 impl ComputeNode {
-    /// Check that compute node has corresponding feature enabled.
-    pub fn has_feature(&self, feature: ComputeFeature) -> bool {
-        let state = self.state.lock().unwrap();
-
-        if let Some(s) = state.pspec.as_ref() {
-            s.spec.features.contains(&feature)
-        } else {
-            false
-        }
-    }
-
     pub fn set_status(&self, status: ComputeStatus) {
         let mut state = self.state.lock().unwrap();
         state.status = status;
@@ -322,12 +301,11 @@ impl ComputeNode {
     // Get basebackup from the libpq connection to pageserver using `connstr` and
     // unarchive it to `pgdata` directory overriding all its previous content.
     #[instrument(skip_all, fields(%lsn))]
-    fn try_get_basebackup(&self, compute_state: &ComputeState, lsn: Lsn) -> Result<()> {
+    fn get_basebackup(&self, compute_state: &ComputeState, lsn: Lsn) -> Result<()> {
         let spec = compute_state.pspec.as_ref().expect("spec must be set");
         let start_time = Instant::now();
 
-        let shard0_connstr = spec.pageserver_connstr.split(',').next().unwrap();
-        let mut config = postgres::Config::from_str(shard0_connstr)?;
+        let mut config = postgres::Config::from_str(&spec.pageserver_connstr)?;
 
         // Use the storage auth token from the config file, if given.
         // Note: this overrides any password set in the connection string.
@@ -394,34 +372,6 @@ impl ComputeNode {
         Ok(())
     }
 
-    // Gets the basebackup in a retry loop
-    #[instrument(skip_all, fields(%lsn))]
-    pub fn get_basebackup(&self, compute_state: &ComputeState, lsn: Lsn) -> Result<()> {
-        let mut retry_period_ms = 500.0;
-        let mut attempts = 0;
-        let max_attempts = 10;
-        loop {
-            let result = self.try_get_basebackup(compute_state, lsn);
-            match result {
-                Ok(_) => {
-                    return result;
-                }
-                Err(ref e) if attempts < max_attempts => {
-                    warn!(
-                        "Failed to get basebackup: {} (attempt {}/{})",
-                        e, attempts, max_attempts
-                    );
-                    std::thread::sleep(std::time::Duration::from_millis(retry_period_ms as u64));
-                    retry_period_ms *= 1.5;
-                }
-                Err(_) => {
-                    return result;
-                }
-            }
-            attempts += 1;
-        }
-    }
-
     pub async fn check_safekeepers_synced_async(
         &self,
         compute_state: &ComputeState,
@@ -524,7 +474,7 @@ impl ComputeNode {
     pub fn sync_safekeepers(&self, storage_auth_token: Option<String>) -> Result<Lsn> {
         let start_time = Utc::now();
 
-        let mut sync_handle = maybe_cgexec(&self.pgbin)
+        let sync_handle = maybe_cgexec(&self.pgbin)
             .args(["--sync-safekeepers"])
             .env("PGDATA", &self.pgdata) // we cannot use -D in this mode
             .envs(if let Some(storage_auth_token) = &storage_auth_token {
@@ -533,29 +483,15 @@ impl ComputeNode {
                 vec![]
             })
             .stdout(Stdio::piped())
-            .stderr(Stdio::piped())
             .spawn()
             .expect("postgres --sync-safekeepers failed to start");
-        SYNC_SAFEKEEPERS_PID.store(sync_handle.id(), Ordering::SeqCst);
 
         // `postgres --sync-safekeepers` will print all log output to stderr and
-        // final LSN to stdout. So we leave stdout to collect LSN, while stderr logs
-        // will be collected in a child thread.
-        let stderr = sync_handle
-            .stderr
-            .take()
-            .expect("stderr should be captured");
-        let logs_handle = handle_postgres_logs(stderr);
-
+        // final LSN to stdout. So we pipe only stdout, while stderr will be automatically
+        // redirected to the caller output.
         let sync_output = sync_handle
             .wait_with_output()
             .expect("postgres --sync-safekeepers failed");
-        SYNC_SAFEKEEPERS_PID.store(0, Ordering::SeqCst);
-
-        // Process has exited, so we can join the logs thread.
-        let _ = logs_handle
-            .join()
-            .map_err(|e| tracing::error!("log thread panicked: {:?}", e));
 
         if !sync_output.status.success() {
             anyhow::bail!(
@@ -637,48 +573,6 @@ impl ComputeNode {
         // Update pg_hba.conf received with basebackup.
         update_pg_hba(pgdata_path)?;
 
-        // Place pg_dynshmem under /dev/shm. This allows us to use
-        // 'dynamic_shared_memory_type = mmap' so that the files are placed in
-        // /dev/shm, similar to how 'dynamic_shared_memory_type = posix' works.
-        //
-        // Why on earth don't we just stick to the 'posix' default, you might
-        // ask.  It turns out that making large allocations with 'posix' doesn't
-        // work very well with autoscaling. The behavior we want is that:
-        //
-        // 1. You can make large DSM allocations, larger than the current RAM
-        //    size of the VM, without errors
-        //
-        // 2. If the allocated memory is really used, the VM is scaled up
-        //    automatically to accommodate that
-        //
-        // We try to make that possible by having swap in the VM. But with the
-        // default 'posix' DSM implementation, we fail step 1, even when there's
-        // plenty of swap available. PostgreSQL uses posix_fallocate() to create
-        // the shmem segment, which is really just a file in /dev/shm in Linux,
-        // but posix_fallocate() on tmpfs returns ENOMEM if the size is larger
-        // than available RAM.
-        //
-        // Using 'dynamic_shared_memory_type = mmap' works around that, because
-        // the Postgres 'mmap' DSM implementation doesn't use
-        // posix_fallocate(). Instead, it uses repeated calls to write(2) to
-        // fill the file with zeros. It's weird that that differs between
-        // 'posix' and 'mmap', but we take advantage of it. When the file is
-        // filled slowly with write(2), the kernel allows it to grow larger, as
-        // long as there's swap available.
-        //
-        // In short, using 'dynamic_shared_memory_type = mmap' allows us one DSM
-        // segment to be larger than currently available RAM. But because we
-        // don't want to store it on a real file, which the kernel would try to
-        // flush to disk, so symlink pg_dynshm to /dev/shm.
-        //
-        // We don't set 'dynamic_shared_memory_type = mmap' here, we let the
-        // control plane control that option. If 'mmap' is not used, this
-        // symlink doesn't affect anything.
-        //
-        // See https://github.com/neondatabase/autoscaling/issues/800
-        std::fs::remove_dir(pgdata_path.join("pg_dynshmem"))?;
-        symlink("/dev/shm/", pgdata_path.join("pg_dynshmem"))?;
-
         match spec.mode {
             ComputeMode::Primary => {}
             ComputeMode::Replica | ComputeMode::Static(..) => {
@@ -723,12 +617,8 @@ impl ComputeNode {
         // Stop it when it's ready
         info!("waiting for postgres");
         wait_for_postgres(&mut pg, Path::new(pgdata))?;
-        // SIGQUIT orders postgres to exit immediately. We don't want to SIGKILL
-        // it to avoid orphaned processes prowling around while datadir is
-        // wiped.
-        let pm_pid = Pid::from_raw(pg.id() as i32);
-        kill(pm_pid, Signal::SIGQUIT)?;
-        info!("sent SIGQUIT signal");
+        pg.kill()?;
+        info!("sent kill signal");
         pg.wait()?;
         info!("done prewarming");
 
@@ -739,12 +629,11 @@ impl ComputeNode {
 
     /// Start Postgres as a child process and manage DBs/roles.
     /// After that this will hang waiting on the postmaster process to exit.
-    /// Returns a handle to the child process and a handle to the logs thread.
     #[instrument(skip_all)]
     pub fn start_postgres(
         &self,
         storage_auth_token: Option<String>,
-    ) -> Result<(std::process::Child, std::thread::JoinHandle<()>)> {
+    ) -> Result<std::process::Child> {
         let pgdata_path = Path::new(&self.pgdata);
 
         // Run postgres as a child process.
@@ -755,38 +644,12 @@ impl ComputeNode {
             } else {
                 vec![]
             })
-            .stderr(Stdio::piped())
             .spawn()
             .expect("cannot start postgres process");
-        PG_PID.store(pg.id(), Ordering::SeqCst);
-
-        // Start a thread to collect logs from stderr.
-        let stderr = pg.stderr.take().expect("stderr should be captured");
-        let logs_handle = handle_postgres_logs(stderr);
 
         wait_for_postgres(&mut pg, pgdata_path)?;
 
-        Ok((pg, logs_handle))
-    }
-
-    /// Do post configuration of the already started Postgres. This function spawns a background thread to
-    /// configure the database after applying the compute spec. Currently, it upgrades the neon extension
-    /// version. In the future, it may upgrade all 3rd-party extensions.
-    #[instrument(skip_all)]
-    pub fn post_apply_config(&self) -> Result<()> {
-        let connstr = self.connstr.clone();
-        thread::spawn(move || {
-            let func = || {
-                let mut client = Client::connect(connstr.as_str(), NoTls)?;
-                handle_neon_extension_upgrade(&mut client)
-                    .context("handle_neon_extension_upgrade")?;
-                Ok::<_, anyhow::Error>(())
-            };
-            if let Err(err) = func() {
-                error!("error while post_apply_config: {err:#}");
-            }
-        });
-        Ok(())
+        Ok(pg)
     }
 
     /// Do initial configuration of the already started Postgres.
@@ -798,36 +661,28 @@ impl ComputeNode {
         // In this case we need to connect with old `zenith_admin` name
         // and create new user. We cannot simply rename connected user,
         // but we can create a new one and grant it all privileges.
-        let connstr = self.connstr.clone();
-        let mut client = match Client::connect(connstr.as_str(), NoTls) {
-            Err(e) => match e.code() {
-                Some(&SqlState::INVALID_PASSWORD)
-                | Some(&SqlState::INVALID_AUTHORIZATION_SPECIFICATION) => {
-                    // connect with zenith_admin if cloud_admin could not authenticate
-                    info!(
-                        "cannot connect to postgres: {}, retrying with `zenith_admin` username",
-                        e
-                    );
-                    let mut zenith_admin_connstr = connstr.clone();
+        let mut client = match Client::connect(self.connstr.as_str(), NoTls) {
+            Err(e) => {
+                info!(
+                    "cannot connect to postgres: {}, retrying with `zenith_admin` username",
+                    e
+                );
+                let mut zenith_admin_connstr = self.connstr.clone();
 
-                    zenith_admin_connstr
-                        .set_username("zenith_admin")
-                        .map_err(|_| anyhow::anyhow!("invalid connstr"))?;
+                zenith_admin_connstr
+                    .set_username("zenith_admin")
+                    .map_err(|_| anyhow::anyhow!("invalid connstr"))?;
 
-                    let mut client =
-                        Client::connect(zenith_admin_connstr.as_str(), NoTls)
-                            .context("broken cloud_admin credential: tried connecting with cloud_admin but could not authenticate, and zenith_admin does not work either")?;
-                    // Disable forwarding so that users don't get a cloud_admin role
-                    client.simple_query("SET neon.forward_ddl = false")?;
-                    client.simple_query("CREATE USER cloud_admin WITH SUPERUSER")?;
-                    client.simple_query("GRANT zenith_admin TO cloud_admin")?;
-                    drop(client);
+                let mut client = Client::connect(zenith_admin_connstr.as_str(), NoTls)?;
+                // Disable forwarding so that users don't get a cloud_admin role
+                client.simple_query("SET neon.forward_ddl = false")?;
+                client.simple_query("CREATE USER cloud_admin WITH SUPERUSER")?;
+                client.simple_query("GRANT zenith_admin TO cloud_admin")?;
+                drop(client);
 
-                    // reconnect with connstring with expected name
-                    Client::connect(connstr.as_str(), NoTls)?
-                }
-                _ => return Err(e.into()),
-            },
+                // reconnect with connsting with expected name
+                Client::connect(self.connstr.as_str(), NoTls)?
+            }
             Ok(client) => client,
         };
 
@@ -840,25 +695,14 @@ impl ComputeNode {
         cleanup_instance(&mut client)?;
         handle_roles(spec, &mut client)?;
         handle_databases(spec, &mut client)?;
-        handle_role_deletions(spec, connstr.as_str(), &mut client)?;
-        handle_grants(
-            spec,
-            &mut client,
-            connstr.as_str(),
-            self.has_feature(ComputeFeature::AnonExtension),
-        )?;
+        handle_role_deletions(spec, self.connstr.as_str(), &mut client)?;
+        handle_grants(spec, &mut client, self.connstr.as_str())?;
         handle_extensions(spec, &mut client)?;
-        handle_extension_neon(&mut client)?;
         create_availability_check_data(&mut client)?;
 
         // 'Close' connection
         drop(client);
 
-        // Run migrations separately to not hold up cold starts
-        thread::spawn(move || {
-            let mut client = Client::connect(connstr.as_str(), NoTls)?;
-            handle_migrations(&mut client)
-        });
         Ok(())
     }
 
@@ -866,12 +710,8 @@ impl ComputeNode {
     // `pg_ctl` for start / stop, so this just seems much easier to do as we already
     // have opened connection to Postgres and superuser access.
     #[instrument(skip_all)]
-    fn pg_reload_conf(&self) -> Result<()> {
-        let pgctl_bin = Path::new(&self.pgbin).parent().unwrap().join("pg_ctl");
-        Command::new(pgctl_bin)
-            .args(["reload", "-D", &self.pgdata])
-            .output()
-            .expect("cannot run pg_ctl process");
+    fn pg_reload_conf(&self, client: &mut Client) -> Result<()> {
+        client.simple_query("SELECT pg_reload_conf()")?;
         Ok(())
     }
 
@@ -881,36 +721,12 @@ impl ComputeNode {
     pub fn reconfigure(&self) -> Result<()> {
         let spec = self.state.lock().unwrap().pspec.clone().unwrap().spec;
 
-        if let Some(ref pgbouncer_settings) = spec.pgbouncer_settings {
-            info!("tuning pgbouncer");
-
-            let rt = tokio::runtime::Builder::new_current_thread()
-                .enable_all()
-                .build()
-                .expect("failed to create rt");
-
-            // Spawn a thread to do the tuning,
-            // so that we don't block the main thread that starts Postgres.
-            let pgbouncer_settings = pgbouncer_settings.clone();
-            let _handle = thread::spawn(move || {
-                let res = rt.block_on(tune_pgbouncer(pgbouncer_settings));
-                if let Err(err) = res {
-                    error!("error while tuning pgbouncer: {err:?}");
-                }
-            });
-        }
-
         // Write new config
         let pgdata_path = Path::new(&self.pgdata);
-        let postgresql_conf_path = pgdata_path.join("postgresql.conf");
-        config::write_postgres_conf(&postgresql_conf_path, &spec, None)?;
-        // temporarily reset max_cluster_size in config
-        // to avoid the possibility of hitting the limit, while we are reconfiguring:
-        // creating new extensions, roles, etc...
-        config::compute_ctl_temp_override_create(pgdata_path, "neon.max_cluster_size=-1")?;
-        self.pg_reload_conf()?;
+        config::write_postgres_conf(&pgdata_path.join("postgresql.conf"), &spec, None)?;
 
         let mut client = Client::connect(self.connstr.as_str(), NoTls)?;
+        self.pg_reload_conf(&mut client)?;
 
         // Proceed with post-startup configuration. Note, that order of operations is important.
         // Disable DDL forwarding because control plane already knows about these roles/databases.
@@ -920,27 +736,13 @@ impl ComputeNode {
             handle_roles(&spec, &mut client)?;
             handle_databases(&spec, &mut client)?;
             handle_role_deletions(&spec, self.connstr.as_str(), &mut client)?;
-            handle_grants(
-                &spec,
-                &mut client,
-                self.connstr.as_str(),
-                self.has_feature(ComputeFeature::AnonExtension),
-            )?;
+            handle_grants(&spec, &mut client, self.connstr.as_str())?;
             handle_extensions(&spec, &mut client)?;
-            handle_extension_neon(&mut client)?;
-            // We can skip handle_migrations here because a new migration can only appear
-            // if we have a new version of the compute_ctl binary, which can only happen
-            // if compute got restarted, in which case we'll end up inside of apply_config
-            // instead of reconfigure.
         }
 
         // 'Close' connection
         drop(client);
 
-        // reset max_cluster_size in config back to original value and reload config
-        config::compute_ctl_temp_override_remove(pgdata_path)?;
-        self.pg_reload_conf()?;
-
         let unknown_op = "unknown".to_string();
         let op_id = spec.operation_uuid.as_ref().unwrap_or(&unknown_op);
         info!(
@@ -952,10 +754,7 @@ impl ComputeNode {
     }
 
     #[instrument(skip_all)]
-    pub fn start_compute(
-        &self,
-        extension_server_port: u16,
-    ) -> Result<(std::process::Child, std::thread::JoinHandle<()>)> {
+    pub fn start_compute(&self, extension_server_port: u16) -> Result<std::process::Child> {
         let compute_state = self.state.lock().unwrap().clone();
         let pspec = compute_state.pspec.as_ref().expect("spec must be set");
         info!(
@@ -966,26 +765,6 @@ impl ComputeNode {
             pspec.timeline_id,
         );
 
-        // tune pgbouncer
-        if let Some(pgbouncer_settings) = &pspec.spec.pgbouncer_settings {
-            info!("tuning pgbouncer");
-
-            let rt = tokio::runtime::Builder::new_current_thread()
-                .enable_all()
-                .build()
-                .expect("failed to create rt");
-
-            // Spawn a thread to do the tuning,
-            // so that we don't block the main thread that starts Postgres.
-            let pgbouncer_settings = pgbouncer_settings.clone();
-            let _handle = thread::spawn(move || {
-                let res = rt.block_on(tune_pgbouncer(pgbouncer_settings));
-                if let Err(err) = res {
-                    error!("error while tuning pgbouncer: {err:?}");
-                }
-            });
-        }
-
         info!(
             "start_compute spec.remote_extensions {:?}",
             pspec.spec.remote_extensions
@@ -1020,24 +799,11 @@ impl ComputeNode {
         self.prepare_pgdata(&compute_state, extension_server_port)?;
 
         let start_time = Utc::now();
-        let pg_process = self.start_postgres(pspec.storage_auth_token.clone())?;
+        let pg = self.start_postgres(pspec.storage_auth_token.clone())?;
 
         let config_time = Utc::now();
-        if pspec.spec.mode == ComputeMode::Primary {
-            if !pspec.spec.skip_pg_catalog_updates {
-                let pgdata_path = Path::new(&self.pgdata);
-                // temporarily reset max_cluster_size in config
-                // to avoid the possibility of hitting the limit, while we are applying config:
-                // creating new extensions, roles, etc...
-                config::compute_ctl_temp_override_create(pgdata_path, "neon.max_cluster_size=-1")?;
-                self.pg_reload_conf()?;
-
-                self.apply_config(&compute_state)?;
-
-                config::compute_ctl_temp_override_remove(pgdata_path)?;
-                self.pg_reload_conf()?;
-            }
-            self.post_apply_config()?;
+        if pspec.spec.mode == ComputeMode::Primary && !pspec.spec.skip_pg_catalog_updates {
+            self.apply_config(&compute_state)?;
         }
 
         let startup_end_time = Utc::now();
@@ -1073,17 +839,7 @@ impl ComputeNode {
         };
         info!(?metrics, "compute start finished");
 
-        Ok(pg_process)
-    }
-
-    /// Update the `last_active` in the shared state, but ensure that it's a more recent one.
-    pub fn update_last_active(&self, last_active: Option<DateTime<Utc>>) {
-        let mut state = self.state.lock().unwrap();
-        // NB: `Some(<DateTime>)` is always greater than `None`.
-        if last_active > state.last_active {
-            state.last_active = last_active;
-            debug!("set the last compute activity time to: {:?}", last_active);
-        }
+        Ok(pg)
     }
 
     // Look for core dumps and collect backtraces.
@@ -1195,12 +951,12 @@ LIMIT 100",
         real_ext_name: String,
         ext_path: RemotePath,
     ) -> Result<u64, DownloadError> {
-        let ext_remote_storage =
-            self.ext_remote_storage
-                .as_ref()
-                .ok_or(DownloadError::BadInput(anyhow::anyhow!(
-                    "Remote extensions storage is not configured",
-                )))?;
+        let remote_storage = self
+            .ext_remote_storage
+            .as_ref()
+            .ok_or(DownloadError::BadInput(anyhow::anyhow!(
+                "Remote extensions storage is not configured",
+            )))?;
 
         let ext_archive_name = ext_path.object_name().expect("bad path");
 
@@ -1256,18 +1012,16 @@ LIMIT 100",
         let download_size = extension_server::download_extension(
             &real_ext_name,
             &ext_path,
-            ext_remote_storage,
+            remote_storage,
             &self.pgbin,
         )
         .await
         .map_err(DownloadError::Other);
 
-        if download_size.is_ok() {
-            self.ext_download_progress
-                .write()
-                .expect("bad lock")
-                .insert(ext_archive_name.to_string(), (download_start, true));
-        }
+        self.ext_download_progress
+            .write()
+            .expect("bad lock")
+            .insert(ext_archive_name.to_string(), (download_start, true));
 
         download_size
     }
@@ -1360,17 +1114,3 @@ LIMIT 100",
         Ok(remote_ext_metrics)
     }
 }
-
-pub fn forward_termination_signal() {
-    let ss_pid = SYNC_SAFEKEEPERS_PID.load(Ordering::SeqCst);
-    if ss_pid != 0 {
-        let ss_pid = nix::unistd::Pid::from_raw(ss_pid as i32);
-        kill(ss_pid, Signal::SIGTERM).ok();
-    }
-    let pg_pid = PG_PID.load(Ordering::SeqCst);
-    if pg_pid != 0 {
-        let pg_pid = nix::unistd::Pid::from_raw(pg_pid as i32);
-        // use 'immediate' shutdown (SIGQUIT): https://www.postgresql.org/docs/current/server-shutdown.html
-        kill(pg_pid, Signal::SIGQUIT).ok();
-    }
-}

compute_tools/src/config.rs

@@ -17,7 +17,6 @@ pub fn line_in_file(path: &Path, line: &str) -> Result<bool> {
         .write(true)
         .create(true)
         .append(false)
-        .truncate(false)
         .open(path)?;
     let buf = io::BufReader::new(&file);
     let mut count: usize = 0;
@@ -52,9 +51,6 @@ pub fn write_postgres_conf(
     if let Some(s) = &spec.pageserver_connstring {
         writeln!(file, "neon.pageserver_connstring={}", escape_conf_value(s))?;
     }
-    if let Some(stripe_size) = spec.shard_stripe_size {
-        writeln!(file, "neon.stripe_size={stripe_size}")?;
-    }
     if !spec.safekeeper_connstrings.is_empty() {
         writeln!(
             file,
@@ -83,12 +79,6 @@ pub fn write_postgres_conf(
         ComputeMode::Replica => {
             // hot_standby is 'on' by default, but let's be explicit
             writeln!(file, "hot_standby=on")?;
-
-            // Inform the replica about the primary state
-            // Default is 'false'
-            if let Some(primary_is_running) = spec.primary_is_running {
-                writeln!(file, "neon.primary_is_running={}", primary_is_running)?;
-            }
         }
     }
 
@@ -103,25 +93,5 @@ pub fn write_postgres_conf(
         writeln!(file, "neon.extension_server_port={}", port)?;
     }
 
-    // This is essential to keep this line at the end of the file,
-    // because it is intended to override any settings above.
-    writeln!(file, "include_if_exists = 'compute_ctl_temp_override.conf'")?;
-
-    Ok(())
-}
-
-/// create file compute_ctl_temp_override.conf in pgdata_dir
-/// add provided options to this file
-pub fn compute_ctl_temp_override_create(pgdata_path: &Path, options: &str) -> Result<()> {
-    let path = pgdata_path.join("compute_ctl_temp_override.conf");
-    let mut file = File::create(path)?;
-    write!(file, "{}", options)?;
-    Ok(())
-}
-
-/// remove file compute_ctl_temp_override.conf in pgdata_dir
-pub fn compute_ctl_temp_override_remove(pgdata_path: &Path) -> Result<()> {
-    let path = pgdata_path.join("compute_ctl_temp_override.conf");
-    std::fs::remove_file(path)?;
     Ok(())
 }

compute_tools/src/extension_server.rs

@@ -71,16 +71,18 @@ More specifically, here is an example ext_index.json
     }
 }
 */
-use anyhow::Result;
-use anyhow::{bail, Context};
-use bytes::Bytes;
+use anyhow::Context;
+use anyhow::{self, Result};
 use compute_api::spec::RemoteExtSpec;
 use regex::Regex;
 use remote_storage::*;
-use reqwest::StatusCode;
+use serde_json;
+use std::io::Read;
+use std::num::{NonZeroU32, NonZeroUsize};
 use std::path::Path;
 use std::str;
 use tar::Archive;
+use tokio::io::AsyncReadExt;
 use tracing::info;
 use tracing::log::warn;
 use zstd::stream::read::Decoder;
@@ -131,36 +133,67 @@ fn parse_pg_version(human_version: &str) -> &str {
     panic!("Unsuported postgres version {human_version}");
 }
 
+#[cfg(test)]
+mod tests {
+    use super::parse_pg_version;
+
+    #[test]
+    fn test_parse_pg_version() {
+        assert_eq!(parse_pg_version("PostgreSQL 15.4"), "v15");
+        assert_eq!(parse_pg_version("PostgreSQL 15.14"), "v15");
+        assert_eq!(
+            parse_pg_version("PostgreSQL 15.4 (Ubuntu 15.4-0ubuntu0.23.04.1)"),
+            "v15"
+        );
+
+        assert_eq!(parse_pg_version("PostgreSQL 14.15"), "v14");
+        assert_eq!(parse_pg_version("PostgreSQL 14.0"), "v14");
+        assert_eq!(
+            parse_pg_version("PostgreSQL 14.9 (Debian 14.9-1.pgdg120+1"),
+            "v14"
+        );
+
+        assert_eq!(parse_pg_version("PostgreSQL 16devel"), "v16");
+        assert_eq!(parse_pg_version("PostgreSQL 16beta1"), "v16");
+        assert_eq!(parse_pg_version("PostgreSQL 16rc2"), "v16");
+        assert_eq!(parse_pg_version("PostgreSQL 16extra"), "v16");
+    }
+
+    #[test]
+    #[should_panic]
+    fn test_parse_pg_unsupported_version() {
+        parse_pg_version("PostgreSQL 13.14");
+    }
+
+    #[test]
+    #[should_panic]
+    fn test_parse_pg_incorrect_version_format() {
+        parse_pg_version("PostgreSQL 14");
+    }
+}
+
 // download the archive for a given extension,
 // unzip it, and place files in the appropriate locations (share/lib)
 pub async fn download_extension(
     ext_name: &str,
     ext_path: &RemotePath,
-    ext_remote_storage: &str,
+    remote_storage: &GenericRemoteStorage,
     pgbin: &str,
 ) -> Result<u64> {
     info!("Download extension {:?} from {:?}", ext_name, ext_path);
-
-    // TODO add retry logic
-    let download_buffer =
-        match download_extension_tar(ext_remote_storage, &ext_path.to_string()).await {
-            Ok(buffer) => buffer,
-            Err(error_message) => {
-                return Err(anyhow::anyhow!(
-                    "error downloading extension {:?}: {:?}",
-                    ext_name,
-                    error_message
-                ));
-            }
-        };
-
+    let mut download = remote_storage.download(ext_path).await?;
+    let mut download_buffer = Vec::new();
+    download
+        .download_stream
+        .read_to_end(&mut download_buffer)
+        .await?;
     let download_size = download_buffer.len() as u64;
-    info!("Download size {:?}", download_size);
     // it's unclear whether it is more performant to decompress into memory or not
     // TODO: decompressing into memory can be avoided
-    let decoder = Decoder::new(download_buffer.as_ref())?;
-    let mut archive = Archive::new(decoder);
-
+    let mut decoder = Decoder::new(download_buffer.as_slice())?;
+    let mut decompress_buffer = Vec::new();
+    decoder.read_to_end(&mut decompress_buffer)?;
+    let mut archive = Archive::new(decompress_buffer.as_slice());
     let unzip_dest = pgbin
         .strip_suffix("/bin/postgres")
         .expect("bad pgbin")
@@ -228,69 +261,29 @@ pub fn create_control_files(remote_extensions: &RemoteExtSpec, pgbin: &str) {
     }
 }
 
-// Do request to extension storage proxy, i.e.
-// curl http://pg-ext-s3-gateway/latest/v15/extensions/anon.tar.zst
-// using HHTP GET
-// and return the response body as bytes
-//
-async fn download_extension_tar(ext_remote_storage: &str, ext_path: &str) -> Result<Bytes> {
-    let uri = format!("{}/{}", ext_remote_storage, ext_path);
-
-    info!("Download extension {:?} from uri {:?}", ext_path, uri);
-
-    let resp = reqwest::get(uri).await?;
-
-    match resp.status() {
-        StatusCode::OK => match resp.bytes().await {
-            Ok(resp) => {
-                info!("Download extension {:?} completed successfully", ext_path);
-                Ok(resp)
-            }
-            Err(e) => bail!("could not deserialize remote extension response: {}", e),
-        },
-        StatusCode::SERVICE_UNAVAILABLE => bail!("remote extension is temporarily unavailable"),
-        _ => bail!(
-            "unexpected remote extension response status code: {}",
-            resp.status()
-        ),
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::parse_pg_version;
-
-    #[test]
-    fn test_parse_pg_version() {
-        assert_eq!(parse_pg_version("PostgreSQL 15.4"), "v15");
-        assert_eq!(parse_pg_version("PostgreSQL 15.14"), "v15");
-        assert_eq!(
-            parse_pg_version("PostgreSQL 15.4 (Ubuntu 15.4-0ubuntu0.23.04.1)"),
-            "v15"
-        );
-
-        assert_eq!(parse_pg_version("PostgreSQL 14.15"), "v14");
-        assert_eq!(parse_pg_version("PostgreSQL 14.0"), "v14");
-        assert_eq!(
-            parse_pg_version("PostgreSQL 14.9 (Debian 14.9-1.pgdg120+1"),
-            "v14"
-        );
-
-        assert_eq!(parse_pg_version("PostgreSQL 16devel"), "v16");
-        assert_eq!(parse_pg_version("PostgreSQL 16beta1"), "v16");
-        assert_eq!(parse_pg_version("PostgreSQL 16rc2"), "v16");
-        assert_eq!(parse_pg_version("PostgreSQL 16extra"), "v16");
-    }
-
-    #[test]
-    #[should_panic]
-    fn test_parse_pg_unsupported_version() {
-        parse_pg_version("PostgreSQL 13.14");
-    }
-
-    #[test]
-    #[should_panic]
-    fn test_parse_pg_incorrect_version_format() {
-        parse_pg_version("PostgreSQL 14");
+// This function initializes the necessary structs to use remote storage
+pub fn init_remote_storage(remote_ext_config: &str) -> anyhow::Result<GenericRemoteStorage> {
+    #[derive(Debug, serde::Deserialize)]
+    struct RemoteExtJson {
+        bucket: String,
+        region: String,
+        endpoint: Option<String>,
+        prefix: Option<String>,
     }
+    let remote_ext_json = serde_json::from_str::<RemoteExtJson>(remote_ext_config)?;
+
+    let config = S3Config {
+        bucket_name: remote_ext_json.bucket,
+        bucket_region: remote_ext_json.region,
+        prefix_in_bucket: remote_ext_json.prefix,
+        endpoint: remote_ext_json.endpoint,
+        concurrency_limit: NonZeroUsize::new(100).expect("100 != 0"),
+        max_keys_per_list_response: None,
+    };
+    let config = RemoteStorageConfig {
+        max_concurrent_syncs: NonZeroUsize::new(100).expect("100 != 0"),
+        max_sync_errors: NonZeroU32::new(100).expect("100 != 0"),
+        storage: RemoteStorageKind::AwsS3(config),
+    };
+    GenericRemoteStorage::from_config(&config)
 }

compute_tools/src/http/api.rs

@@ -5,7 +5,6 @@ use std::net::SocketAddr;
 use std::sync::Arc;
 use std::thread;
 
-use crate::compute::forward_termination_signal;
 use crate::compute::{ComputeNode, ComputeState, ParsedSpec};
 use compute_api::requests::ConfigurationRequest;
 use compute_api::responses::{ComputeStatus, ComputeStatusResponse, GenericAPIError};
@@ -13,6 +12,8 @@ use compute_api::responses::{ComputeStatus, ComputeStatusResponse, GenericAPIErr
 use anyhow::Result;
 use hyper::service::{make_service_fn, service_fn};
 use hyper::{Body, Method, Request, Response, Server, StatusCode};
+use num_cpus;
+use serde_json;
 use tokio::task;
 use tracing::{error, info, warn};
 use tracing_utils::http::OtelName;
@@ -122,18 +123,7 @@ async fn routes(req: Request<Body>, compute: &Arc<ComputeNode>) -> Response<Body
             }
         }
 
-        (&Method::POST, "/terminate") => {
-            info!("serving /terminate POST request");
-            match handle_terminate_request(compute).await {
-                Ok(()) => Response::new(Body::empty()),
-                Err((msg, code)) => {
-                    error!("error handling /terminate request: {msg}");
-                    render_json_error(&msg, code)
-                }
-            }
-        }
-
-        // download extension files from remote extension storage on demand
+        // download extension files from S3 on demand
         (&Method::POST, route) if route.starts_with("/extension_server/") => {
             info!("serving {:?} POST request", route);
             info!("req.uri {:?}", req.uri());
@@ -237,7 +227,7 @@ async fn handle_configure_request(
 
         let parsed_spec = match ParsedSpec::try_from(spec) {
             Ok(ps) => ps,
-            Err(msg) => return Err((msg, StatusCode::BAD_REQUEST)),
+            Err(msg) => return Err((msg, StatusCode::PRECONDITION_FAILED)),
         };
 
         // XXX: wrap state update under lock in code blocks. Otherwise,
@@ -307,49 +297,6 @@ fn render_json_error(e: &str, status: StatusCode) -> Response<Body> {
         .unwrap()
 }
 
-async fn handle_terminate_request(compute: &Arc<ComputeNode>) -> Result<(), (String, StatusCode)> {
-    {
-        let mut state = compute.state.lock().unwrap();
-        if state.status == ComputeStatus::Terminated {
-            return Ok(());
-        }
-        if state.status != ComputeStatus::Empty && state.status != ComputeStatus::Running {
-            let msg = format!(
-                "invalid compute status for termination request: {:?}",
-                state.status.clone()
-            );
-            return Err((msg, StatusCode::PRECONDITION_FAILED));
-        }
-        state.status = ComputeStatus::TerminationPending;
-        compute.state_changed.notify_all();
-        drop(state);
-    }
-    forward_termination_signal();
-    info!("sent signal and notified waiters");
-
-    // Spawn a blocking thread to wait for compute to become Terminated.
-    // This is needed to do not block the main pool of workers and
-    // be able to serve other requests while some particular request
-    // is waiting for compute to finish configuration.
-    let c = compute.clone();
-    task::spawn_blocking(move || {
-        let mut state = c.state.lock().unwrap();
-        while state.status != ComputeStatus::Terminated {
-            state = c.state_changed.wait(state).unwrap();
-            info!(
-                "waiting for compute to become Terminated, current status: {:?}",
-                state.status
-            );
-        }
-
-        Ok(())
-    })
-    .await
-    .unwrap()?;
-    info!("terminated Postgres");
-    Ok(())
-}
-
 // Main Hyper HTTP server function that runs it and blocks waiting on it forever.
 #[tokio::main]
 async fn serve(port: u16, state: Arc<ComputeNode>) {

compute_tools/src/http/openapi_spec.yaml

@@ -156,40 +156,17 @@ paths:
                 description: Error text or 'OK' if download succeeded.
                 example: "OK"
         400:
-          description: Request is invalid.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
+        description: Request is invalid.
+        content:
+          application/json:
+            schema:
+              $ref: "#/components/schemas/GenericError"
         500:
-          description: Extension download request failed.
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-
-  /terminate:
-    post:
-      tags:
-      - Terminate
-      summary: Terminate Postgres and wait for it to exit
-      description: ""
-      operationId: terminate
-      responses:
-        200:
-          description: Result
-        412:
-          description: "wrong state"
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
-        500:
-          description: "Unexpected error"
-          content:
-            application/json:
-              schema:
-                $ref: "#/components/schemas/GenericError"
+        description: Extension download request failed.
+        content:
+          application/json:
+            schema:
+              $ref: "#/components/schemas/GenericError"
 
 components:
   securitySchemes:

compute_tools/src/lib.rs

@@ -1,7 +1,7 @@
+//!
 //! Various tools and helpers to handle cluster / compute node (Postgres)
 //! configuration.
-#![deny(unsafe_code)]
-#![deny(clippy::undocumented_unsafe_blocks)]
+//!
 pub mod checker;
 pub mod config;
 pub mod configurator;

compute_tools/src/logger.rs

@@ -38,9 +38,3 @@ pub fn init_tracing_and_logging(default_log_level: &str) -> anyhow::Result<()> {
 
     Ok(())
 }
-
-/// Replace all newline characters with a special character to make it
-/// easier to grep for log messages.
-pub fn inlinify(s: &str) -> String {
-    s.replace('\n', "\u{200B}")
-}

compute_tools/src/monitor.rs

@@ -3,193 +3,97 @@ use std::{thread, time::Duration};
 
 use chrono::{DateTime, Utc};
 use postgres::{Client, NoTls};
-use tracing::{debug, error, info, warn};
+use tracing::{debug, info};
 
 use crate::compute::ComputeNode;
-use compute_api::responses::ComputeStatus;
-use compute_api::spec::ComputeFeature;
 
 const MONITOR_CHECK_INTERVAL: Duration = Duration::from_millis(500);
 
 // Spin in a loop and figure out the last activity time in the Postgres.
 // Then update it in the shared state. This function never errors out.
-// NB: the only expected panic is at `Mutex` unwrap(), all other errors
-// should be handled gracefully.
+// XXX: the only expected panic is at `RwLock` unwrap().
 fn watch_compute_activity(compute: &ComputeNode) {
     // Suppose that `connstr` doesn't change
     let connstr = compute.connstr.as_str();
-
-    // During startup and configuration we connect to every Postgres database,
-    // but we don't want to count this as some user activity. So wait until
-    // the compute fully started before monitoring activity.
-    wait_for_postgres_start(compute);
-
     // Define `client` outside of the loop to reuse existing connection if it's active.
     let mut client = Client::connect(connstr, NoTls);
 
-    let mut sleep = false;
-    let mut prev_active_time: Option<f64> = None;
-    let mut prev_sessions: Option<i64> = None;
-
-    if compute.has_feature(ComputeFeature::ActivityMonitorExperimental) {
-        info!("starting experimental activity monitor for {}", connstr);
-    } else {
-        info!("starting activity monitor for {}", connstr);
-    }
+    info!("watching Postgres activity at {}", connstr);
 
     loop {
-        // We use `continue` a lot, so it's more convenient to sleep at the top of the loop.
-        // But skip the first sleep, so we can connect to Postgres immediately.
-        if sleep {
-            // Should be outside of the mutex lock to allow others to read while we sleep.
-            thread::sleep(MONITOR_CHECK_INTERVAL);
-        } else {
-            sleep = true;
-        }
+        // Should be outside of the write lock to allow others to read while we sleep.
+        thread::sleep(MONITOR_CHECK_INTERVAL);
 
         match &mut client {
             Ok(cli) => {
                 if cli.is_closed() {
-                    info!("connection to Postgres is closed, trying to reconnect");
+                    info!("connection to postgres closed, trying to reconnect");
 
                     // Connection is closed, reconnect and try again.
                     client = Client::connect(connstr, NoTls);
                     continue;
                 }
 
-                // This is a new logic, only enable if the feature flag is set.
-                // TODO: remove this once we are sure that it works OR drop it altogether.
-                if compute.has_feature(ComputeFeature::ActivityMonitorExperimental) {
-                    // First, check if the total active time or sessions across all databases has changed.
-                    // If it did, it means that user executed some queries. In theory, it can even go down if
-                    // some databases were dropped, but it's still a user activity.
-                    match get_database_stats(cli) {
-                        Ok((active_time, sessions)) => {
-                            let mut detected_activity = false;
+                // Get all running client backends except ourself, use RFC3339 DateTime format.
+                let backends = cli
+                    .query(
+                        "SELECT state, to_char(state_change, 'YYYY-MM-DD\"T\"HH24:MI:SS.US\"Z\"') AS state_change
+                         FROM pg_stat_activity
+                         WHERE backend_type = 'client backend'
+                            AND pid != pg_backend_pid()
+                            AND usename != 'cloud_admin';", // XXX: find a better way to filter other monitors?
+                        &[],
+                    );
+                let mut last_active = compute.state.lock().unwrap().last_active;
 
-                            prev_active_time = match prev_active_time {
-                                Some(prev_active_time) => {
-                                    if active_time != prev_active_time {
-                                        detected_activity = true;
-                                    }
-                                    Some(active_time)
-                                }
-                                None => Some(active_time),
+                if let Ok(backs) = backends {
+                    let mut idle_backs: Vec<DateTime<Utc>> = vec![];
+
+                    for b in backs.into_iter() {
+                        let state: String = match b.try_get("state") {
+                            Ok(state) => state,
+                            Err(_) => continue,
+                        };
+
+                        if state == "idle" {
+                            let change: String = match b.try_get("state_change") {
+                                Ok(state_change) => state_change,
+                                Err(_) => continue,
                             };
-                            prev_sessions = match prev_sessions {
-                                Some(prev_sessions) => {
-                                    if sessions != prev_sessions {
-                                        detected_activity = true;
-                                    }
-                                    Some(sessions)
+                            let change = DateTime::parse_from_rfc3339(&change);
+                            match change {
+                                Ok(t) => idle_backs.push(t.with_timezone(&Utc)),
+                                Err(e) => {
+                                    info!("cannot parse backend state_change DateTime: {}", e);
+                                    continue;
                                 }
-                                None => Some(sessions),
-                            };
-
-                            if detected_activity {
-                                // Update the last active time and continue, we don't need to
-                                // check backends state change.
-                                compute.update_last_active(Some(Utc::now()));
-                                continue;
                             }
+                        } else {
+                            // Found non-idle backend, so the last activity is NOW.
+                            // Save it and exit the for loop. Also clear the idle backend
+                            // `state_change` timestamps array as it doesn't matter now.
+                            last_active = Some(Utc::now());
+                            idle_backs.clear();
+                            break;
                         }
-                        Err(e) => {
-                            error!("could not get database statistics: {}", e);
-                            continue;
-                        }
+                    }
+
+                    // Get idle backend `state_change` with the max timestamp.
+                    if let Some(last) = idle_backs.iter().max() {
+                        last_active = Some(*last);
                     }
                 }
 
-                // Second, if database statistics is the same, check all backends state change,
-                // maybe there is some with more recent activity. `get_backends_state_change()`
-                // can return None or stale timestamp, so it's `compute.update_last_active()`
-                // responsibility to check if the new timestamp is more recent than the current one.
-                // This helps us to discover new sessions, that did nothing yet.
-                match get_backends_state_change(cli) {
-                    Ok(last_active) => {
-                        compute.update_last_active(last_active);
-                    }
-                    Err(e) => {
-                        error!("could not get backends state change: {}", e);
-                    }
-                }
-
-                // Finally, if there are existing (logical) walsenders, do not suspend.
-                //
-                // walproposer doesn't currently show up in pg_stat_replication,
-                // but protect if it will be
-                let ws_count_query = "select count(*) from pg_stat_replication where application_name != 'walproposer';";
-                match cli.query_one(ws_count_query, &[]) {
-                    Ok(r) => match r.try_get::<&str, i64>("count") {
-                        Ok(num_ws) => {
-                            if num_ws > 0 {
-                                compute.update_last_active(Some(Utc::now()));
-                                continue;
-                            }
-                        }
-                        Err(e) => {
-                            warn!("failed to parse walsenders count: {:?}", e);
-                            continue;
-                        }
-                    },
-                    Err(e) => {
-                        warn!("failed to get list of walsenders: {:?}", e);
-                        continue;
-                    }
-                }
-                //
-                // Don't suspend compute if there is an active logical replication subscription
-                //
-                // `where pid is not null` – to filter out read only computes and subscription on branches
-                //
-                let logical_subscriptions_query =
-                    "select count(*) from pg_stat_subscription where pid is not null;";
-                match cli.query_one(logical_subscriptions_query, &[]) {
-                    Ok(row) => match row.try_get::<&str, i64>("count") {
-                        Ok(num_subscribers) => {
-                            if num_subscribers > 0 {
-                                compute.update_last_active(Some(Utc::now()));
-                                continue;
-                            }
-                        }
-                        Err(e) => {
-                            warn!("failed to parse `pg_stat_subscription` count: {:?}", e);
-                            continue;
-                        }
-                    },
-                    Err(e) => {
-                        warn!(
-                            "failed to get list of active logical replication subscriptions: {:?}",
-                            e
-                        );
-                        continue;
-                    }
-                }
-                //
-                // Do not suspend compute if autovacuum is running
-                //
-                let autovacuum_count_query = "select count(*) from pg_stat_activity where backend_type = 'autovacuum worker'";
-                match cli.query_one(autovacuum_count_query, &[]) {
-                    Ok(r) => match r.try_get::<&str, i64>("count") {
-                        Ok(num_workers) => {
-                            if num_workers > 0 {
-                                compute.update_last_active(Some(Utc::now()));
-                                continue;
-                            }
-                        }
-                        Err(e) => {
-                            warn!("failed to parse autovacuum workers count: {:?}", e);
-                            continue;
-                        }
-                    },
-                    Err(e) => {
-                        warn!("failed to get list of autovacuum workers: {:?}", e);
-                        continue;
-                    }
+                // Update the last activity in the shared state if we got a more recent one.
+                let mut state = compute.state.lock().unwrap();
+                // NB: `Some(<DateTime>)` is always greater than `None`.
+                if last_active > state.last_active {
+                    state.last_active = last_active;
+                    debug!("set the last compute activity time to: {:?}", last_active);
                 }
             }
             Err(e) => {
-                debug!("could not connect to Postgres: {}, retrying", e);
+                debug!("cannot connect to postgres: {}, retrying", e);
 
                 // Establish a new connection and try again.
                 client = Client::connect(connstr, NoTls);
@@ -198,124 +102,12 @@ fn watch_compute_activity(compute: &ComputeNode) {
     }
 }
 
-// Hang on condition variable waiting until the compute status is `Running`.
-fn wait_for_postgres_start(compute: &ComputeNode) {
-    let mut state = compute.state.lock().unwrap();
-    while state.status != ComputeStatus::Running {
-        info!("compute is not running, waiting before monitoring activity");
-        state = compute.state_changed.wait(state).unwrap();
-
-        if state.status == ComputeStatus::Running {
-            break;
-        }
-    }
-}
-
-// Figure out the total active time and sessions across all non-system databases.
-// Returned tuple is `(active_time, sessions)`.
-// It can return `0.0` active time or `0` sessions, which means no user databases exist OR
-// it was a start with skipped `pg_catalog` updates and user didn't do any queries
-// (or open any sessions) yet.
-fn get_database_stats(cli: &mut Client) -> anyhow::Result<(f64, i64)> {
-    // Filter out `postgres` database as `compute_ctl` and other monitoring tools
-    // like `postgres_exporter` use it to query Postgres statistics.
-    // Use explicit 8 bytes type casts to match Rust types.
-    let stats = cli.query_one(
-        "SELECT coalesce(sum(active_time), 0.0)::float8 AS total_active_time,
-            coalesce(sum(sessions), 0)::bigint AS total_sessions
-        FROM pg_stat_database
-        WHERE datname NOT IN (
-                'postgres',
-                'template0',
-                'template1'
-            );",
-        &[],
-    );
-    let stats = match stats {
-        Ok(stats) => stats,
-        Err(e) => {
-            return Err(anyhow::anyhow!("could not query active_time: {}", e));
-        }
-    };
-
-    let active_time: f64 = match stats.try_get("total_active_time") {
-        Ok(active_time) => active_time,
-        Err(e) => return Err(anyhow::anyhow!("could not get total_active_time: {}", e)),
-    };
-
-    let sessions: i64 = match stats.try_get("total_sessions") {
-        Ok(sessions) => sessions,
-        Err(e) => return Err(anyhow::anyhow!("could not get total_sessions: {}", e)),
-    };
-
-    Ok((active_time, sessions))
-}
-
-// Figure out the most recent state change time across all client backends.
-// If there is currently active backend, timestamp will be `Utc::now()`.
-// It can return `None`, which means no client backends exist or we were
-// unable to parse the timestamp.
-fn get_backends_state_change(cli: &mut Client) -> anyhow::Result<Option<DateTime<Utc>>> {
-    let mut last_active: Option<DateTime<Utc>> = None;
-    // Get all running client backends except ourself, use RFC3339 DateTime format.
-    let backends = cli.query(
-        "SELECT state, to_char(state_change, 'YYYY-MM-DD\"T\"HH24:MI:SS.US\"Z\"') AS state_change
-                FROM pg_stat_activity
-                    WHERE backend_type = 'client backend'
-                    AND pid != pg_backend_pid()
-                    AND usename != 'cloud_admin';", // XXX: find a better way to filter other monitors?
-        &[],
-    );
-
-    match backends {
-        Ok(backs) => {
-            let mut idle_backs: Vec<DateTime<Utc>> = vec![];
-
-            for b in backs.into_iter() {
-                let state: String = match b.try_get("state") {
-                    Ok(state) => state,
-                    Err(_) => continue,
-                };
-
-                if state == "idle" {
-                    let change: String = match b.try_get("state_change") {
-                        Ok(state_change) => state_change,
-                        Err(_) => continue,
-                    };
-                    let change = DateTime::parse_from_rfc3339(&change);
-                    match change {
-                        Ok(t) => idle_backs.push(t.with_timezone(&Utc)),
-                        Err(e) => {
-                            info!("cannot parse backend state_change DateTime: {}", e);
-                            continue;
-                        }
-                    }
-                } else {
-                    // Found non-idle backend, so the last activity is NOW.
-                    // Return immediately, no need to check other backends.
-                    return Ok(Some(Utc::now()));
-                }
-            }
-
-            // Get idle backend `state_change` with the max timestamp.
-            if let Some(last) = idle_backs.iter().max() {
-                last_active = Some(*last);
-            }
-        }
-        Err(e) => {
-            return Err(anyhow::anyhow!("could not query backends: {}", e));
-        }
-    }
-
-    Ok(last_active)
-}
-
 /// Launch a separate compute monitor thread and return its `JoinHandle`.
-pub fn launch_monitor(compute: &Arc<ComputeNode>) -> thread::JoinHandle<()> {
-    let compute = Arc::clone(compute);
+pub fn launch_monitor(state: &Arc<ComputeNode>) -> thread::JoinHandle<()> {
+    let state = Arc::clone(state);
 
     thread::Builder::new()
         .name("compute-monitor".into())
-        .spawn(move || watch_compute_activity(&compute))
+        .spawn(move || watch_compute_activity(&state))
         .expect("cannot launch compute monitor thread")
 }

compute_tools/src/pg_helpers.rs

@@ -6,17 +6,12 @@ use std::io::{BufRead, BufReader};
 use std::os::unix::fs::PermissionsExt;
 use std::path::Path;
 use std::process::Child;
-use std::thread::JoinHandle;
 use std::time::{Duration, Instant};
 
 use anyhow::{bail, Result};
-use ini::Ini;
 use notify::{RecursiveMode, Watcher};
 use postgres::{Client, Transaction};
-use tokio::io::AsyncBufReadExt;
-use tokio::time::timeout;
-use tokio_postgres::NoTls;
-use tracing::{debug, error, info, instrument};
+use tracing::{debug, instrument};
 
 use compute_api::spec::{Database, GenericOption, GenericOptions, PgIdent, Role};
 
@@ -264,10 +259,9 @@ pub fn wait_for_postgres(pg: &mut Child, pgdata: &Path) -> Result<()> {
     // case we miss some events for some reason. Not strictly necessary, but
     // better safe than sorry.
     let (tx, rx) = std::sync::mpsc::channel();
-    let watcher_res = notify::recommended_watcher(move |res| {
+    let (mut watcher, rx): (Box<dyn Watcher>, _) = match notify::recommended_watcher(move |res| {
         let _ = tx.send(res);
-    });
-    let (mut watcher, rx): (Box<dyn Watcher>, _) = match watcher_res {
+    }) {
         Ok(watcher) => (Box::new(watcher), rx),
         Err(e) => {
             match e.kind {
@@ -365,172 +359,3 @@ pub fn create_pgdata(pgdata: &str) -> Result<()> {
 
     Ok(())
 }
-
-/// Update pgbouncer.ini with provided options
-fn update_pgbouncer_ini(
-    pgbouncer_config: HashMap<String, String>,
-    pgbouncer_ini_path: &str,
-) -> Result<()> {
-    let mut conf = Ini::load_from_file(pgbouncer_ini_path)?;
-    let section = conf.section_mut(Some("pgbouncer")).unwrap();
-
-    for (option_name, value) in pgbouncer_config.iter() {
-        section.insert(option_name, value);
-        debug!(
-            "Updating pgbouncer.ini with new values {}={}",
-            option_name, value
-        );
-    }
-
-    conf.write_to_file(pgbouncer_ini_path)?;
-    Ok(())
-}
-
-/// Tune pgbouncer.
-/// 1. Apply new config using pgbouncer admin console
-/// 2. Add new values to pgbouncer.ini to preserve them after restart
-pub async fn tune_pgbouncer(pgbouncer_config: HashMap<String, String>) -> Result<()> {
-    let pgbouncer_connstr = if std::env::var_os("AUTOSCALING").is_some() {
-        // for VMs use pgbouncer specific way to connect to
-        // pgbouncer admin console without password
-        // when pgbouncer is running under the same user.
-        "host=/tmp port=6432 dbname=pgbouncer user=pgbouncer".to_string()
-    } else {
-        // for k8s use normal connection string with password
-        // to connect to pgbouncer admin console
-        let mut pgbouncer_connstr =
-            "host=localhost port=6432 dbname=pgbouncer user=postgres sslmode=disable".to_string();
-        if let Ok(pass) = std::env::var("PGBOUNCER_PASSWORD") {
-            pgbouncer_connstr.push_str(format!(" password={}", pass).as_str());
-        }
-        pgbouncer_connstr
-    };
-
-    info!(
-        "Connecting to pgbouncer with connection string: {}",
-        pgbouncer_connstr
-    );
-
-    // connect to pgbouncer, retrying several times
-    // because pgbouncer may not be ready yet
-    let mut retries = 3;
-    let client = loop {
-        match tokio_postgres::connect(&pgbouncer_connstr, NoTls).await {
-            Ok((client, connection)) => {
-                tokio::spawn(async move {
-                    if let Err(e) = connection.await {
-                        eprintln!("connection error: {}", e);
-                    }
-                });
-                break client;
-            }
-            Err(e) => {
-                if retries == 0 {
-                    return Err(e.into());
-                }
-                error!("Failed to connect to pgbouncer: pgbouncer_connstr {}", e);
-                retries -= 1;
-                tokio::time::sleep(Duration::from_secs(1)).await;
-            }
-        }
-    };
-
-    // Apply new config
-    for (option_name, value) in pgbouncer_config.iter() {
-        let query = format!("SET {}={}", option_name, value);
-        // keep this log line for debugging purposes
-        info!("Applying pgbouncer setting change: {}", query);
-
-        if let Err(err) = client.simple_query(&query).await {
-            // Don't fail on error, just print it into log
-            error!(
-                "Failed to apply pgbouncer setting change: {},  {}",
-                query, err
-            );
-        };
-    }
-
-    // save values to pgbouncer.ini
-    // so that they are preserved after pgbouncer restart
-    let pgbouncer_ini_path = if std::env::var_os("AUTOSCALING").is_some() {
-        // in VMs we use /etc/pgbouncer.ini
-        "/etc/pgbouncer.ini".to_string()
-    } else {
-        // in pods we use /var/db/postgres/pgbouncer/pgbouncer.ini
-        // this is a shared volume between pgbouncer and postgres containers
-        // FIXME: fix permissions for this file
-        "/var/db/postgres/pgbouncer/pgbouncer.ini".to_string()
-    };
-    update_pgbouncer_ini(pgbouncer_config, &pgbouncer_ini_path)?;
-
-    Ok(())
-}
-
-/// Spawn a thread that will read Postgres logs from `stderr`, join multiline logs
-/// and send them to the logger. In the future we may also want to add context to
-/// these logs.
-pub fn handle_postgres_logs(stderr: std::process::ChildStderr) -> JoinHandle<()> {
-    std::thread::spawn(move || {
-        let runtime = tokio::runtime::Builder::new_current_thread()
-            .enable_all()
-            .build()
-            .expect("failed to build tokio runtime");
-
-        let res = runtime.block_on(async move {
-            let stderr = tokio::process::ChildStderr::from_std(stderr)?;
-            handle_postgres_logs_async(stderr).await
-        });
-        if let Err(e) = res {
-            tracing::error!("error while processing postgres logs: {}", e);
-        }
-    })
-}
-
-/// Read Postgres logs from `stderr` until EOF. Buffer is flushed on one of the following conditions:
-/// - next line starts with timestamp
-/// - EOF
-/// - no new lines were written for the last second
-async fn handle_postgres_logs_async(stderr: tokio::process::ChildStderr) -> Result<()> {
-    let mut lines = tokio::io::BufReader::new(stderr).lines();
-    let timeout_duration = Duration::from_millis(100);
-    let ts_regex =
-        regex::Regex::new(r"^\d+-\d{2}-\d{2} \d{2}:\d{2}:\d{2}").expect("regex is valid");
-
-    let mut buf = vec![];
-    loop {
-        let next_line = timeout(timeout_duration, lines.next_line()).await;
-
-        // we should flush lines from the buffer if we cannot continue reading multiline message
-        let should_flush_buf = match next_line {
-            // Flushing if new line starts with timestamp
-            Ok(Ok(Some(ref line))) => ts_regex.is_match(line),
-            // Flushing on EOF, timeout or error
-            _ => true,
-        };
-
-        if !buf.is_empty() && should_flush_buf {
-            // join multiline message into a single line, separated by unicode Zero Width Space.
-            // "PG:" suffix is used to distinguish postgres logs from other logs.
-            let combined = format!("PG:{}\n", buf.join("\u{200B}"));
-            buf.clear();
-
-            // sync write to stderr to avoid interleaving with other logs
-            use std::io::Write;
-            let res = std::io::stderr().lock().write_all(combined.as_bytes());
-            if let Err(e) = res {
-                tracing::error!("error while writing to stderr: {}", e);
-            }
-        }
-
-        // if not timeout, append line to the buffer
-        if next_line.is_ok() {
-            match next_line?? {
-                Some(line) => buf.push(line),
-                // EOF
-                None => break,
-            };
-        }
-    }
-
-    Ok(())
-}

compute_tools/src/spec.rs

@@ -9,7 +9,6 @@ use reqwest::StatusCode;
 use tracing::{error, info, info_span, instrument, span_enabled, warn, Level};
 
 use crate::config;
-use crate::logger::inlinify;
 use crate::params::PG_HBA_ALL_MD5;
 use crate::pg_helpers::*;
 
@@ -25,7 +24,7 @@ fn do_control_plane_request(
 ) -> Result<ControlPlaneSpecResponse, (bool, String)> {
     let resp = reqwest::blocking::Client::new()
         .get(uri)
-        .header("Authorization", format!("Bearer {}", jwt))
+        .header("Authorization", jwt)
         .send()
         .map_err(|e| {
             (
@@ -69,7 +68,7 @@ pub fn get_spec_from_control_plane(
     base_uri: &str,
     compute_id: &str,
 ) -> Result<Option<ComputeSpec>> {
-    let cp_uri = format!("{base_uri}/compute/api/v2/computes/{compute_id}/spec");
+    let cp_uri = format!("{base_uri}/management/api/v2/computes/{compute_id}/spec");
     let jwt: String = match std::env::var("NEON_CONTROL_PLANE_TOKEN") {
         Ok(v) => v,
         Err(_) => "".to_string(),
@@ -119,6 +118,19 @@ pub fn get_spec_from_control_plane(
     spec
 }
 
+/// It takes cluster specification and does the following:
+/// - Serialize cluster config and put it into `postgresql.conf` completely rewriting the file.
+/// - Update `pg_hba.conf` to allow external connections.
+pub fn handle_configuration(spec: &ComputeSpec, pgdata_path: &Path) -> Result<()> {
+    // File `postgresql.conf` is no longer included into `basebackup`, so just
+    // always write all config into it creating new file.
+    config::write_postgres_conf(&pgdata_path.join("postgresql.conf"), spec, None)?;
+
+    update_pg_hba(pgdata_path)?;
+
+    Ok(())
+}
+
 /// Check `pg_hba.conf` and update if needed to allow external connections.
 pub fn update_pg_hba(pgdata_path: &Path) -> Result<()> {
     // XXX: consider making it a part of spec.json
@@ -190,20 +202,18 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
 
     // Print a list of existing Postgres roles (only in debug mode)
     if span_enabled!(Level::INFO) {
-        let mut vec = Vec::new();
+        info!("postgres roles:");
         for r in &existing_roles {
-            vec.push(format!(
-                "{}:{}",
+            info!(
+                "    - {}:{}",
                 r.name,
                 if r.encrypted_password.is_some() {
                     "[FILTERED]"
                 } else {
                     "(null)"
                 }
-            ));
+            );
         }
-
-        info!("postgres roles (total {}): {:?}", vec.len(), vec);
     }
 
     // Process delta operations first
@@ -241,10 +251,7 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
     // Refresh Postgres roles info to handle possible roles renaming
     let existing_roles: Vec<Role> = get_existing_roles(&mut xact)?;
 
-    info!(
-        "handling cluster spec roles (total {})",
-        spec.cluster.roles.len()
-    );
+    info!("cluster spec roles:");
     for role in &spec.cluster.roles {
         let name = &role.name;
         // XXX: with a limited number of roles it is fine, but consider making it a HashMap
@@ -289,25 +296,16 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
         match action {
             RoleAction::None => {}
             RoleAction::Update => {
-                // This can be run on /every/ role! Not just ones created through the console.
-                // This means that if you add some funny ALTER here that adds a permission,
-                // this will get run even on user-created roles! This will result in different
-                // behavior before and after a spec gets reapplied. The below ALTER as it stands
-                // now only grants LOGIN and changes the password. Please do not allow this branch
-                // to do anything silly.
                 let mut query: String = format!("ALTER ROLE {} ", name.pg_quote());
                 query.push_str(&role.to_pg_options());
                 xact.execute(query.as_str(), &[])?;
             }
             RoleAction::Create => {
-                // This branch only runs when roles are created through the console, so it is
-                // safe to add more permissions here. BYPASSRLS and REPLICATION are inherited
-                // from neon_superuser.
                 let mut query: String = format!(
-                    "CREATE ROLE {} INHERIT CREATEROLE CREATEDB BYPASSRLS REPLICATION IN ROLE neon_superuser",
+                    "CREATE ROLE {} CREATEROLE CREATEDB BYPASSRLS REPLICATION IN ROLE neon_superuser",
                     name.pg_quote()
                 );
-                info!("running role create query: '{}'", &query);
+                info!("role create query: '{}'", &query);
                 query.push_str(&role.to_pg_options());
                 xact.execute(query.as_str(), &[])?;
             }
@@ -324,7 +322,7 @@ pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                 RoleAction::Create => " -> create",
                 RoleAction::Update => " -> update",
             };
-            info!(" - {}:{}{}", name, pwd, action_str);
+            info!("   - {}:{}{}", name, pwd, action_str);
         }
     }
 
@@ -376,49 +374,33 @@ pub fn handle_role_deletions(spec: &ComputeSpec, connstr: &str, client: &mut Cli
     Ok(())
 }
 
-fn reassign_owned_objects_in_one_db(
-    conf: Config,
-    role_name: &PgIdent,
-    db_owner: &PgIdent,
-) -> Result<()> {
-    let mut client = conf.connect(NoTls)?;
-
-    // This will reassign all dependent objects to the db owner
-    let reassign_query = format!(
-        "REASSIGN OWNED BY {} TO {}",
-        role_name.pg_quote(),
-        db_owner.pg_quote()
-    );
-    info!(
-        "reassigning objects owned by '{}' in db '{}' to '{}'",
-        role_name,
-        conf.get_dbname().unwrap_or(""),
-        db_owner
-    );
-    client.simple_query(&reassign_query)?;
-
-    // This now will only drop privileges of the role
-    let drop_query = format!("DROP OWNED BY {}", role_name.pg_quote());
-    client.simple_query(&drop_query)?;
-    Ok(())
-}
-
 // Reassign all owned objects in all databases to the owner of the database.
 fn reassign_owned_objects(spec: &ComputeSpec, connstr: &str, role_name: &PgIdent) -> Result<()> {
     for db in &spec.cluster.databases {
         if db.owner != *role_name {
             let mut conf = Config::from_str(connstr)?;
             conf.dbname(&db.name);
-            reassign_owned_objects_in_one_db(conf, role_name, &db.owner)?;
+
+            let mut client = conf.connect(NoTls)?;
+
+            // This will reassign all dependent objects to the db owner
+            let reassign_query = format!(
+                "REASSIGN OWNED BY {} TO {}",
+                role_name.pg_quote(),
+                db.owner.pg_quote()
+            );
+            info!(
+                "reassigning objects owned by '{}' in db '{}' to '{}'",
+                role_name, &db.name, &db.owner
+            );
+            client.simple_query(&reassign_query)?;
+
+            // This now will only drop privileges of the role
+            let drop_query = format!("DROP OWNED BY {}", role_name.pg_quote());
+            client.simple_query(&drop_query)?;
         }
     }
 
-    // Also handle case when there are no databases in the spec.
-    // In this case we need to reassign objects in the default database.
-    let conf = Config::from_str(connstr)?;
-    let db_owner = PgIdent::from_str("cloud_admin")?;
-    reassign_owned_objects_in_one_db(conf, role_name, &db_owner)?;
-
     Ok(())
 }
 
@@ -433,11 +415,10 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
 
     // Print a list of existing Postgres databases (only in debug mode)
     if span_enabled!(Level::INFO) {
-        let mut vec = Vec::new();
+        info!("postgres databases:");
         for (dbname, db) in &existing_dbs {
-            vec.push(format!("{}:{}", dbname, db.owner));
+            info!("    {}:{}", dbname, db.owner);
         }
-        info!("postgres databases (total {}): {:?}", vec.len(), vec);
     }
 
     // Process delta operations first
@@ -509,10 +490,7 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
     // Refresh Postgres databases info to handle possible renames
     let existing_dbs = get_existing_dbs(client)?;
 
-    info!(
-        "handling cluster spec databases (total {})",
-        spec.cluster.databases.len()
-    );
+    info!("cluster spec databases:");
     for db in &spec.cluster.databases {
         let name = &db.name;
         let pg_db = existing_dbs.get(name);
@@ -571,7 +549,7 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
                 DatabaseAction::Create => " -> create",
                 DatabaseAction::Update => " -> update",
             };
-            info!(" - {}:{}{}", db.name, db.owner, action_str);
+            info!("   - {}:{}{}", db.name, db.owner, action_str);
         }
     }
 
@@ -581,12 +559,7 @@ pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
 /// Grant CREATE ON DATABASE to the database owner and do some other alters and grants
 /// to allow users creating trusted extensions and re-creating `public` schema, for example.
 #[instrument(skip_all)]
-pub fn handle_grants(
-    spec: &ComputeSpec,
-    client: &mut Client,
-    connstr: &str,
-    enable_anon_extension: bool,
-) -> Result<()> {
+pub fn handle_grants(spec: &ComputeSpec, client: &mut Client, connstr: &str) -> Result<()> {
     info!("modifying database permissions");
     let existing_dbs = get_existing_dbs(client)?;
 
@@ -655,9 +628,6 @@ pub fn handle_grants(
         // remove this code if possible. The worst thing that could happen is that
         // user won't be able to use public schema in NEW databases created in the
         // very OLD project.
-        //
-        // Also, alter default permissions so that relations created by extensions can be
-        // used by neon_superuser without permission issues.
         let grant_query = "DO $$\n\
                 BEGIN\n\
                     IF EXISTS(\n\
@@ -676,30 +646,12 @@ pub fn handle_grants(
                             GRANT CREATE ON SCHEMA public TO web_access;\n\
                         END IF;\n\
                     END IF;\n\
-                    IF EXISTS(\n\
-                        SELECT nspname\n\
-                        FROM pg_catalog.pg_namespace\n\
-                        WHERE nspname = 'public'\n\
-                    )\n\
-                    THEN\n\
-                        ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT ALL ON TABLES TO neon_superuser WITH GRANT OPTION;\n\
-                        ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT ALL ON SEQUENCES TO neon_superuser WITH GRANT OPTION;\n\
-                    END IF;\n\
                 END\n\
             $$;"
         .to_string();
 
-        info!(
-            "grant query for db {} : {}",
-            &db.name,
-            inlinify(&grant_query)
-        );
+        info!("grant query for db {} : {}", &db.name, &grant_query);
         db_client.simple_query(&grant_query)?;
-
-        // it is important to run this after all grants
-        if enable_anon_extension {
-            handle_extension_anon(spec, &db.owner, &mut db_client, false)?;
-        }
     }
 
     Ok(())
@@ -719,265 +671,3 @@ pub fn handle_extensions(spec: &ComputeSpec, client: &mut Client) -> Result<()>
 
     Ok(())
 }
-
-/// Run CREATE and ALTER EXTENSION neon UPDATE for postgres database
-#[instrument(skip_all)]
-pub fn handle_extension_neon(client: &mut Client) -> Result<()> {
-    info!("handle extension neon");
-
-    let mut query = "CREATE SCHEMA IF NOT EXISTS neon";
-    client.simple_query(query)?;
-
-    query = "CREATE EXTENSION IF NOT EXISTS neon WITH SCHEMA neon";
-    info!("create neon extension with query: {}", query);
-    client.simple_query(query)?;
-
-    query = "UPDATE pg_extension SET extrelocatable = true WHERE extname = 'neon'";
-    client.simple_query(query)?;
-
-    query = "ALTER EXTENSION neon SET SCHEMA neon";
-    info!("alter neon extension schema with query: {}", query);
-    client.simple_query(query)?;
-
-    // this will be a no-op if extension is already up to date,
-    // which may happen in two cases:
-    // - extension was just installed
-    // - extension was already installed and is up to date
-    let query = "ALTER EXTENSION neon UPDATE";
-    info!("update neon extension version with query: {}", query);
-    if let Err(e) = client.simple_query(query) {
-        error!(
-            "failed to upgrade neon extension during `handle_extension_neon`: {}",
-            e
-        );
-    }
-
-    Ok(())
-}
-
-#[instrument(skip_all)]
-pub fn handle_neon_extension_upgrade(client: &mut Client) -> Result<()> {
-    info!("handle neon extension upgrade");
-    let query = "ALTER EXTENSION neon UPDATE";
-    info!("update neon extension version with query: {}", query);
-    client.simple_query(query)?;
-
-    Ok(())
-}
-
-#[instrument(skip_all)]
-pub fn handle_migrations(client: &mut Client) -> Result<()> {
-    info!("handle migrations");
-
-    // !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-    // !BE SURE TO ONLY ADD MIGRATIONS TO THE END OF THIS ARRAY. IF YOU DO NOT, VERY VERY BAD THINGS MAY HAPPEN!
-    // !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-    let migrations = [
-        "ALTER ROLE neon_superuser BYPASSRLS",
-        r#"
-DO $$
-DECLARE
-    role_name text;
-BEGIN
-    FOR role_name IN SELECT rolname FROM pg_roles WHERE pg_has_role(rolname, 'neon_superuser', 'member')
-    LOOP
-        RAISE NOTICE 'EXECUTING ALTER ROLE % INHERIT', quote_ident(role_name);
-        EXECUTE 'ALTER ROLE ' || quote_ident(role_name) || ' INHERIT';
-    END LOOP;
-
-    FOR role_name IN SELECT rolname FROM pg_roles
-        WHERE
-            NOT pg_has_role(rolname, 'neon_superuser', 'member') AND NOT starts_with(rolname, 'pg_')
-    LOOP
-        RAISE NOTICE 'EXECUTING ALTER ROLE % NOBYPASSRLS', quote_ident(role_name);
-        EXECUTE 'ALTER ROLE ' || quote_ident(role_name) || ' NOBYPASSRLS';
-    END LOOP;
-END $$;
-"#,
-        r#"
-DO $$
-BEGIN
-    IF (SELECT setting::numeric >= 160000 FROM pg_settings WHERE name = 'server_version_num') THEN
-        EXECUTE 'GRANT pg_create_subscription TO neon_superuser';
-    END IF;
-END
-$$;"#,
-        "GRANT pg_monitor TO neon_superuser WITH ADMIN OPTION",
-        // Don't remove: these are some SQLs that we originally applied in migrations but turned out to execute somewhere else.
-        "",
-        "",
-        "",
-        "",
-        "",
-        // Add new migrations below.
-    ];
-
-    let mut query = "CREATE SCHEMA IF NOT EXISTS neon_migration";
-    client.simple_query(query)?;
-
-    query = "CREATE TABLE IF NOT EXISTS neon_migration.migration_id (key INT NOT NULL PRIMARY KEY, id bigint NOT NULL DEFAULT 0)";
-    client.simple_query(query)?;
-
-    query = "INSERT INTO neon_migration.migration_id VALUES (0, 0) ON CONFLICT DO NOTHING";
-    client.simple_query(query)?;
-
-    query = "ALTER SCHEMA neon_migration OWNER TO cloud_admin";
-    client.simple_query(query)?;
-
-    query = "REVOKE ALL ON SCHEMA neon_migration FROM PUBLIC";
-    client.simple_query(query)?;
-
-    query = "SELECT id FROM neon_migration.migration_id";
-    let row = client.query_one(query, &[])?;
-    let mut current_migration: usize = row.get::<&str, i64>("id") as usize;
-    let starting_migration_id = current_migration;
-
-    query = "BEGIN";
-    client.simple_query(query)?;
-
-    while current_migration < migrations.len() {
-        let migration = &migrations[current_migration];
-        if migration.is_empty() {
-            info!("Skip migration id={}", current_migration);
-        } else {
-            info!("Running migration:\n{}\n", migration);
-            client.simple_query(migration)?;
-        }
-        current_migration += 1;
-    }
-    let setval = format!(
-        "UPDATE neon_migration.migration_id SET id={}",
-        migrations.len()
-    );
-    client.simple_query(&setval)?;
-
-    query = "COMMIT";
-    client.simple_query(query)?;
-
-    info!(
-        "Ran {} migrations",
-        (migrations.len() - starting_migration_id)
-    );
-
-    Ok(())
-}
-
-/// Connect to the database as superuser and pre-create anon extension
-/// if it is present in shared_preload_libraries
-#[instrument(skip_all)]
-pub fn handle_extension_anon(
-    spec: &ComputeSpec,
-    db_owner: &str,
-    db_client: &mut Client,
-    grants_only: bool,
-) -> Result<()> {
-    info!("handle extension anon");
-
-    if let Some(libs) = spec.cluster.settings.find("shared_preload_libraries") {
-        if libs.contains("anon") {
-            if !grants_only {
-                // check if extension is already initialized using anon.is_initialized()
-                let query = "SELECT anon.is_initialized()";
-                match db_client.query(query, &[]) {
-                    Ok(rows) => {
-                        if !rows.is_empty() {
-                            let is_initialized: bool = rows[0].get(0);
-                            if is_initialized {
-                                info!("anon extension is already initialized");
-                                return Ok(());
-                            }
-                        }
-                    }
-                    Err(e) => {
-                        warn!(
-                            "anon extension is_installed check failed with expected error: {}",
-                            e
-                        );
-                    }
-                };
-
-                // Create anon extension if this compute needs it
-                // Users cannot create it themselves, because superuser is required.
-                let mut query = "CREATE EXTENSION IF NOT EXISTS anon CASCADE";
-                info!("creating anon extension with query: {}", query);
-                match db_client.query(query, &[]) {
-                    Ok(_) => {}
-                    Err(e) => {
-                        error!("anon extension creation failed with error: {}", e);
-                        return Ok(());
-                    }
-                }
-
-                // check that extension is installed
-                query = "SELECT extname FROM pg_extension WHERE extname = 'anon'";
-                let rows = db_client.query(query, &[])?;
-                if rows.is_empty() {
-                    error!("anon extension is not installed");
-                    return Ok(());
-                }
-
-                // Initialize anon extension
-                // This also requires superuser privileges, so users cannot do it themselves.
-                query = "SELECT anon.init()";
-                match db_client.query(query, &[]) {
-                    Ok(_) => {}
-                    Err(e) => {
-                        error!("anon.init() failed with error: {}", e);
-                        return Ok(());
-                    }
-                }
-            }
-
-            // check that extension is installed, if not bail early
-            let query = "SELECT extname FROM pg_extension WHERE extname = 'anon'";
-            match db_client.query(query, &[]) {
-                Ok(rows) => {
-                    if rows.is_empty() {
-                        error!("anon extension is not installed");
-                        return Ok(());
-                    }
-                }
-                Err(e) => {
-                    error!("anon extension check failed with error: {}", e);
-                    return Ok(());
-                }
-            };
-
-            let query = format!("GRANT ALL ON SCHEMA anon TO {}", db_owner);
-            info!("granting anon extension permissions with query: {}", query);
-            db_client.simple_query(&query)?;
-
-            // Grant permissions to db_owner to use anon extension functions
-            let query = format!("GRANT ALL ON ALL FUNCTIONS IN SCHEMA anon TO {}", db_owner);
-            info!("granting anon extension permissions with query: {}", query);
-            db_client.simple_query(&query)?;
-
-            // This is needed, because some functions are defined as SECURITY DEFINER.
-            // In Postgres SECURITY DEFINER functions are executed with the privileges
-            // of the owner.
-            // In anon extension this it is needed to access some GUCs, which are only accessible to
-            // superuser. But we've patched postgres to allow db_owner to access them as well.
-            // So we need to change owner of these functions to db_owner.
-            let query = format!("
-                SELECT 'ALTER FUNCTION '||nsp.nspname||'.'||p.proname||'('||pg_get_function_identity_arguments(p.oid)||') OWNER TO {};'
-                from pg_proc p
-                join pg_namespace nsp ON p.pronamespace = nsp.oid
-                where nsp.nspname = 'anon';", db_owner);
-
-            info!("change anon extension functions owner to db owner");
-            db_client.simple_query(&query)?;
-
-            //  affects views as well
-            let query = format!("GRANT ALL ON ALL TABLES IN SCHEMA anon TO {}", db_owner);
-            info!("granting anon extension permissions with query: {}", query);
-            db_client.simple_query(&query)?;
-
-            let query = format!("GRANT ALL ON ALL SEQUENCES IN SCHEMA anon TO {}", db_owner);
-            info!("granting anon extension permissions with query: {}", query);
-            db_client.simple_query(&query)?;
-        }
-    }
-
-    Ok(())
-}

control_plane/Cargo.toml

@@ -6,13 +6,10 @@ license.workspace = true
 
 [dependencies]
 anyhow.workspace = true
-async-trait.workspace = true
 camino.workspace = true
 clap.workspace = true
 comfy-table.workspace = true
-futures.workspace = true
 git-version.workspace = true
-humantime.workspace = true
 nix.workspace = true
 once_cell.workspace = true
 postgres.workspace = true
@@ -20,7 +17,6 @@ hex.workspace = true
 hyper.workspace = true
 regex.workspace = true
 reqwest = { workspace = true, features = ["blocking", "json"] }
-scopeguard.workspace = true
 serde.workspace = true
 serde_json.workspace = true
 serde_with.workspace = true
@@ -28,11 +24,10 @@ tar.workspace = true
 thiserror.workspace = true
 toml.workspace = true
 tokio.workspace = true
-tokio-postgres.workspace = true
-tokio-util.workspace = true
 url.workspace = true
+# Note: Do not directly depend on pageserver or safekeeper; use pageserver_api or safekeeper_api
+# instead, so that recompile times are better.
 pageserver_api.workspace = true
-pageserver_client.workspace = true
 postgres_backend.workspace = true
 safekeeper_api.workspace = true
 postgres_connection.workspace = true

control_plane/README.md

@@ -1,26 +0,0 @@
-# Control Plane and Neon Local
-
-This crate contains tools to start a Neon development environment locally. This utility can be used with the `cargo neon` command.
-
-## Example: Start with Postgres 16
-
-To create and start a local development environment with Postgres 16, you will need to provide `--pg-version` flag to 3 of the start-up commands.
-
-```shell
-cargo neon init --pg-version 16
-cargo neon start
-cargo neon tenant create --set-default --pg-version 16
-cargo neon endpoint create main --pg-version 16
-cargo neon endpoint start main
-```
-
-## Example: Create Test User and Database
-
-By default, `cargo neon` starts an endpoint with `cloud_admin` and `postgres` database. If you want to have a role and a database similar to what we have on the cloud service, you can do it with the following commands when starting an endpoint.
-
-```shell
-cargo neon endpoint create main --pg-version 16 --update-catalog true
-cargo neon endpoint start main --create-test-user true
-```
-
-The first command creates `neon_superuser` and necessary roles. The second command creates `test` user and `neondb` database. You will see a connection string that connects you to the test user after running the second command.

control_plane/attachment_service/Cargo.toml

@@ -1,51 +0,0 @@
-[package]
-name = "attachment_service"
-version = "0.1.0"
-edition.workspace = true
-license.workspace = true
-
-[[bin]]
-name = "storage_controller"
-path = "src/main.rs"
-
-[features]
-default = []
-# Enables test-only APIs and behaviors
-testing = []
-
-[dependencies]
-anyhow.workspace = true
-aws-config.workspace = true
-bytes.workspace = true
-camino.workspace = true
-clap.workspace = true
-fail.workspace = true
-futures.workspace = true
-git-version.workspace = true
-hex.workspace = true
-hyper.workspace = true
-humantime.workspace = true
-lasso.workspace = true
-once_cell.workspace = true
-pageserver_api.workspace = true
-pageserver_client.workspace = true
-postgres_connection.workspace = true
-reqwest.workspace = true
-routerify.workspace = true
-serde.workspace = true
-serde_json.workspace = true
-thiserror.workspace = true
-tokio.workspace = true
-tokio-util.workspace = true
-tracing.workspace = true
-measured.workspace = true
-
-diesel = { version = "2.1.4", features = ["serde_json", "postgres", "r2d2"] }
-diesel_migrations = { version = "2.1.0" }
-r2d2 = { version = "0.8.10" }
-
-utils = { path = "../../libs/utils/" }
-metrics = { path = "../../libs/metrics/" }
-control_plane = { path = ".." }
-workspace_hack = { version = "0.1", path = "../../workspace_hack" }
-

control_plane/attachment_service/migrations/00000000000000_diesel_initial_setup/down.sql

@@ -1,6 +0,0 @@
--- This file was automatically created by Diesel to setup helper functions
--- and other internal bookkeeping. This file is safe to edit, any future
--- changes will be added to existing projects as new migrations.
-
-DROP FUNCTION IF EXISTS diesel_manage_updated_at(_tbl regclass);
-DROP FUNCTION IF EXISTS diesel_set_updated_at();

control_plane/attachment_service/migrations/00000000000000_diesel_initial_setup/up.sql

@@ -1,36 +0,0 @@
--- This file was automatically created by Diesel to setup helper functions
--- and other internal bookkeeping. This file is safe to edit, any future
--- changes will be added to existing projects as new migrations.
-
-
-
-
--- Sets up a trigger for the given table to automatically set a column called
--- `updated_at` whenever the row is modified (unless `updated_at` was included
--- in the modified columns)
---
--- # Example
---
--- ```sql
--- CREATE TABLE users (id SERIAL PRIMARY KEY, updated_at TIMESTAMP NOT NULL DEFAULT NOW());
---
--- SELECT diesel_manage_updated_at('users');
--- ```
-CREATE OR REPLACE FUNCTION diesel_manage_updated_at(_tbl regclass) RETURNS VOID AS $$
-BEGIN
-    EXECUTE format('CREATE TRIGGER set_updated_at BEFORE UPDATE ON %s
-                    FOR EACH ROW EXECUTE PROCEDURE diesel_set_updated_at()', _tbl);
-END;
-$$ LANGUAGE plpgsql;
-
-CREATE OR REPLACE FUNCTION diesel_set_updated_at() RETURNS trigger AS $$
-BEGIN
-    IF (
-        NEW IS DISTINCT FROM OLD AND
-        NEW.updated_at IS NOT DISTINCT FROM OLD.updated_at
-    ) THEN
-        NEW.updated_at := current_timestamp;
-    END IF;
-    RETURN NEW;
-END;
-$$ LANGUAGE plpgsql;

control_plane/attachment_service/migrations/2024-01-07-211257_create_tenant_shards/down.sql

@@ -1 +0,0 @@
-DROP TABLE tenant_shards;

control_plane/attachment_service/migrations/2024-01-07-211257_create_tenant_shards/up.sql

@@ -1,13 +0,0 @@
-CREATE TABLE tenant_shards (
-  tenant_id VARCHAR NOT NULL,
-  shard_number INTEGER NOT NULL,
-  shard_count INTEGER NOT NULL,
-  PRIMARY KEY(tenant_id, shard_number, shard_count),
-  shard_stripe_size INTEGER NOT NULL,
-  generation INTEGER NOT NULL,
-  generation_pageserver BIGINT NOT NULL,
-  placement_policy VARCHAR NOT NULL,
-  splitting SMALLINT NOT NULL,
-  -- config is JSON encoded, opaque to the database.
-  config TEXT NOT NULL
-);

control_plane/attachment_service/migrations/2024-01-07-212945_create_nodes/down.sql

@@ -1 +0,0 @@
-DROP TABLE nodes;

control_plane/attachment_service/migrations/2024-01-07-212945_create_nodes/up.sql

@@ -1,10 +0,0 @@
-CREATE TABLE nodes (
-  node_id BIGINT PRIMARY KEY NOT NULL,
-
-  scheduling_policy VARCHAR NOT NULL,
-
-  listen_http_addr VARCHAR NOT NULL,
-  listen_http_port INTEGER NOT NULL,
-  listen_pg_addr VARCHAR NOT NULL,
-  listen_pg_port INTEGER NOT NULL
-);

control_plane/attachment_service/migrations/2024-02-29-094122_generations_null/down.sql

@@ -1,2 +0,0 @@
-ALTER TABLE tenant_shards ALTER generation SET NOT NULL;
-ALTER TABLE tenant_shards ALTER generation_pageserver SET NOT NULL;

control_plane/attachment_service/migrations/2024-02-29-094122_generations_null/up.sql

@@ -1,4 +0,0 @@
-
-
-ALTER TABLE tenant_shards ALTER generation DROP NOT NULL;
-ALTER TABLE tenant_shards ALTER generation_pageserver DROP NOT NULL;

control_plane/attachment_service/migrations/2024-03-18-184429_rename_policy/down.sql

@@ -1,3 +0,0 @@
-
-UPDATE tenant_shards set placement_policy='{"Double": 1}' where placement_policy='{"Attached": 1}';
-UPDATE tenant_shards set placement_policy='"Single"' where placement_policy='{"Attached": 0}';

control_plane/attachment_service/migrations/2024-03-18-184429_rename_policy/up.sql

@@ -1,3 +0,0 @@
-
-UPDATE tenant_shards set placement_policy='{"Attached": 1}' where placement_policy='{"Double": 1}';
-UPDATE tenant_shards set placement_policy='{"Attached": 0}' where placement_policy='"Single"';

control_plane/attachment_service/migrations/2024-03-27-133204_tenant_policies/down.sql

@@ -1,3 +0,0 @@
--- This file should undo anything in `up.sql`
-
-ALTER TABLE tenant_shards drop scheduling_policy;

control_plane/attachment_service/migrations/2024-03-27-133204_tenant_policies/up.sql

@@ -1,2 +0,0 @@
-
-ALTER TABLE tenant_shards add scheduling_policy VARCHAR NOT NULL DEFAULT '"Active"';

control_plane/attachment_service/src/auth.rs

@@ -1,9 +0,0 @@
-use utils::auth::{AuthError, Claims, Scope};
-
-pub fn check_permission(claims: &Claims, required_scope: Scope) -> Result<(), AuthError> {
-    if claims.scope != required_scope {
-        return Err(AuthError("Scope mismatch. Permission denied".into()));
-    }
-
-    Ok(())
-}

control_plane/attachment_service/src/compute_hook.rs

@@ -1,465 +0,0 @@
-use std::{collections::HashMap, time::Duration};
-
-use control_plane::endpoint::{ComputeControlPlane, EndpointStatus};
-use control_plane::local_env::LocalEnv;
-use hyper::{Method, StatusCode};
-use pageserver_api::shard::{ShardCount, ShardNumber, ShardStripeSize, TenantShardId};
-use postgres_connection::parse_host_port;
-use serde::{Deserialize, Serialize};
-use tokio_util::sync::CancellationToken;
-use utils::{
-    backoff::{self},
-    id::{NodeId, TenantId},
-};
-
-use crate::service::Config;
-
-const SLOWDOWN_DELAY: Duration = Duration::from_secs(5);
-
-pub(crate) const API_CONCURRENCY: usize = 32;
-
-struct ShardedComputeHookTenant {
-    stripe_size: ShardStripeSize,
-    shard_count: ShardCount,
-    shards: Vec<(ShardNumber, NodeId)>,
-}
-
-enum ComputeHookTenant {
-    Unsharded(NodeId),
-    Sharded(ShardedComputeHookTenant),
-}
-
-impl ComputeHookTenant {
-    /// Construct with at least one shard's information
-    fn new(tenant_shard_id: TenantShardId, stripe_size: ShardStripeSize, node_id: NodeId) -> Self {
-        if tenant_shard_id.shard_count.count() > 1 {
-            Self::Sharded(ShardedComputeHookTenant {
-                shards: vec![(tenant_shard_id.shard_number, node_id)],
-                stripe_size,
-                shard_count: tenant_shard_id.shard_count,
-            })
-        } else {
-            Self::Unsharded(node_id)
-        }
-    }
-
-    /// Set one shard's location.  If stripe size or shard count have changed, Self is reset
-    /// and drops existing content.
-    fn update(
-        &mut self,
-        tenant_shard_id: TenantShardId,
-        stripe_size: ShardStripeSize,
-        node_id: NodeId,
-    ) {
-        match self {
-            Self::Unsharded(existing_node_id) if tenant_shard_id.shard_count.count() == 1 => {
-                *existing_node_id = node_id
-            }
-            Self::Sharded(sharded_tenant)
-                if sharded_tenant.stripe_size == stripe_size
-                    && sharded_tenant.shard_count == tenant_shard_id.shard_count =>
-            {
-                if let Some(existing) = sharded_tenant
-                    .shards
-                    .iter()
-                    .position(|s| s.0 == tenant_shard_id.shard_number)
-                {
-                    sharded_tenant.shards.get_mut(existing).unwrap().1 = node_id;
-                } else {
-                    sharded_tenant
-                        .shards
-                        .push((tenant_shard_id.shard_number, node_id));
-                    sharded_tenant.shards.sort_by_key(|s| s.0)
-                }
-            }
-            _ => {
-                // Shard count changed: reset struct.
-                *self = Self::new(tenant_shard_id, stripe_size, node_id);
-            }
-        }
-    }
-}
-
-#[derive(Serialize, Deserialize, Debug)]
-struct ComputeHookNotifyRequestShard {
-    node_id: NodeId,
-    shard_number: ShardNumber,
-}
-
-/// Request body that we send to the control plane to notify it of where a tenant is attached
-#[derive(Serialize, Deserialize, Debug)]
-struct ComputeHookNotifyRequest {
-    tenant_id: TenantId,
-    stripe_size: Option<ShardStripeSize>,
-    shards: Vec<ComputeHookNotifyRequestShard>,
-}
-
-/// Error type for attempts to call into the control plane compute notification hook
-#[derive(thiserror::Error, Debug)]
-pub(crate) enum NotifyError {
-    // Request was not send successfully, e.g. transport error
-    #[error("Sending request: {0}")]
-    Request(#[from] reqwest::Error),
-    // Request could not be serviced right now due to ongoing Operation in control plane, but should be possible soon.
-    #[error("Control plane tenant busy")]
-    Busy,
-    // Explicit 429 response asking us to retry less frequently
-    #[error("Control plane overloaded")]
-    SlowDown,
-    // A 503 response indicates the control plane can't handle the request right now
-    #[error("Control plane unavailable (status {0})")]
-    Unavailable(StatusCode),
-    // API returned unexpected non-success status.  We will retry, but log a warning.
-    #[error("Control plane returned unexpected status {0}")]
-    Unexpected(StatusCode),
-    // We shutdown while sending
-    #[error("Shutting down")]
-    ShuttingDown,
-    // A response indicates we will never succeed, such as 400 or 404
-    #[error("Non-retryable error {0}")]
-    Fatal(StatusCode),
-}
-
-impl ComputeHookTenant {
-    fn maybe_reconfigure(&self, tenant_id: TenantId) -> Option<ComputeHookNotifyRequest> {
-        match self {
-            Self::Unsharded(node_id) => Some(ComputeHookNotifyRequest {
-                tenant_id,
-                shards: vec![ComputeHookNotifyRequestShard {
-                    shard_number: ShardNumber(0),
-                    node_id: *node_id,
-                }],
-                stripe_size: None,
-            }),
-            Self::Sharded(sharded_tenant)
-                if sharded_tenant.shards.len() == sharded_tenant.shard_count.count() as usize =>
-            {
-                Some(ComputeHookNotifyRequest {
-                    tenant_id,
-                    shards: sharded_tenant
-                        .shards
-                        .iter()
-                        .map(|(shard_number, node_id)| ComputeHookNotifyRequestShard {
-                            shard_number: *shard_number,
-                            node_id: *node_id,
-                        })
-                        .collect(),
-                    stripe_size: Some(sharded_tenant.stripe_size),
-                })
-            }
-            Self::Sharded(sharded_tenant) => {
-                // Sharded tenant doesn't yet have information for all its shards
-
-                tracing::info!(
-                    "ComputeHookTenant::maybe_reconfigure: not enough shards ({}/{})",
-                    sharded_tenant.shards.len(),
-                    sharded_tenant.shard_count.count()
-                );
-                None
-            }
-        }
-    }
-}
-
-/// The compute hook is a destination for notifications about changes to tenant:pageserver
-/// mapping.  It aggregates updates for the shards in a tenant, and when appropriate reconfigures
-/// the compute connection string.
-pub(super) struct ComputeHook {
-    config: Config,
-    state: tokio::sync::Mutex<HashMap<TenantId, ComputeHookTenant>>,
-    authorization_header: Option<String>,
-}
-
-impl ComputeHook {
-    pub(super) fn new(config: Config) -> Self {
-        let authorization_header = config
-            .control_plane_jwt_token
-            .clone()
-            .map(|jwt| format!("Bearer {}", jwt));
-
-        Self {
-            state: Default::default(),
-            config,
-            authorization_header,
-        }
-    }
-
-    /// For test environments: use neon_local's LocalEnv to update compute
-    async fn do_notify_local(
-        &self,
-        reconfigure_request: ComputeHookNotifyRequest,
-    ) -> anyhow::Result<()> {
-        let env = match LocalEnv::load_config() {
-            Ok(e) => e,
-            Err(e) => {
-                tracing::warn!("Couldn't load neon_local config, skipping compute update ({e})");
-                return Ok(());
-            }
-        };
-        let cplane =
-            ComputeControlPlane::load(env.clone()).expect("Error loading compute control plane");
-        let ComputeHookNotifyRequest {
-            tenant_id,
-            shards,
-            stripe_size,
-        } = reconfigure_request;
-
-        let compute_pageservers = shards
-            .into_iter()
-            .map(|shard| {
-                let ps_conf = env
-                    .get_pageserver_conf(shard.node_id)
-                    .expect("Unknown pageserver");
-                let (pg_host, pg_port) = parse_host_port(&ps_conf.listen_pg_addr)
-                    .expect("Unable to parse listen_pg_addr");
-                (pg_host, pg_port.unwrap_or(5432))
-            })
-            .collect::<Vec<_>>();
-
-        for (endpoint_name, endpoint) in &cplane.endpoints {
-            if endpoint.tenant_id == tenant_id && endpoint.status() == EndpointStatus::Running {
-                tracing::info!("Reconfiguring endpoint {}", endpoint_name,);
-                endpoint
-                    .reconfigure(compute_pageservers.clone(), stripe_size)
-                    .await?;
-            }
-        }
-
-        Ok(())
-    }
-
-    async fn do_notify_iteration(
-        &self,
-        client: &reqwest::Client,
-        url: &String,
-        reconfigure_request: &ComputeHookNotifyRequest,
-        cancel: &CancellationToken,
-    ) -> Result<(), NotifyError> {
-        let req = client.request(Method::PUT, url);
-        let req = if let Some(value) = &self.authorization_header {
-            req.header(reqwest::header::AUTHORIZATION, value)
-        } else {
-            req
-        };
-
-        tracing::info!(
-            "Sending notify request to {} ({:?})",
-            url,
-            reconfigure_request
-        );
-        let send_result = req.json(&reconfigure_request).send().await;
-        let response = match send_result {
-            Ok(r) => r,
-            Err(e) => return Err(e.into()),
-        };
-
-        // Treat all 2xx responses as success
-        if response.status() >= StatusCode::OK && response.status() < StatusCode::MULTIPLE_CHOICES {
-            if response.status() != StatusCode::OK {
-                // Non-200 2xx response: it doesn't make sense to retry, but this is unexpected, so
-                // log a warning.
-                tracing::warn!(
-                    "Unexpected 2xx response code {} from control plane",
-                    response.status()
-                );
-            }
-
-            return Ok(());
-        }
-
-        // Error response codes
-        match response.status() {
-            StatusCode::TOO_MANY_REQUESTS => {
-                // TODO: 429 handling should be global: set some state visible to other requests
-                // so that they will delay before starting, rather than all notifications trying
-                // once before backing off.
-                tokio::time::timeout(SLOWDOWN_DELAY, cancel.cancelled())
-                    .await
-                    .ok();
-                Err(NotifyError::SlowDown)
-            }
-            StatusCode::LOCKED => {
-                // We consider this fatal, because it's possible that the operation blocking the control one is
-                // also the one that is waiting for this reconcile.  We should let the reconciler calling
-                // this hook fail, to give control plane a chance to un-lock.
-                tracing::info!("Control plane reports tenant is locked, dropping out of notify");
-                Err(NotifyError::Busy)
-            }
-            StatusCode::SERVICE_UNAVAILABLE
-            | StatusCode::GATEWAY_TIMEOUT
-            | StatusCode::BAD_GATEWAY => Err(NotifyError::Unavailable(response.status())),
-            StatusCode::BAD_REQUEST | StatusCode::UNAUTHORIZED | StatusCode::FORBIDDEN => {
-                Err(NotifyError::Fatal(response.status()))
-            }
-            _ => Err(NotifyError::Unexpected(response.status())),
-        }
-    }
-
-    async fn do_notify(
-        &self,
-        url: &String,
-        reconfigure_request: ComputeHookNotifyRequest,
-        cancel: &CancellationToken,
-    ) -> Result<(), NotifyError> {
-        let client = reqwest::Client::new();
-        backoff::retry(
-            || self.do_notify_iteration(&client, url, &reconfigure_request, cancel),
-            |e| {
-                matches!(
-                    e,
-                    NotifyError::Fatal(_) | NotifyError::Unexpected(_) | NotifyError::Busy
-                )
-            },
-            3,
-            10,
-            "Send compute notification",
-            cancel,
-        )
-        .await
-        .ok_or_else(|| NotifyError::ShuttingDown)
-        .and_then(|x| x)
-    }
-
-    /// Call this to notify the compute (postgres) tier of new pageservers to use
-    /// for a tenant.  notify() is called by each shard individually, and this function
-    /// will decide whether an update to the tenant is sent.  An update is sent on the
-    /// condition that:
-    /// - We know a pageserver for every shard.
-    /// - All the shards have the same shard_count (i.e. we are not mid-split)
-    ///
-    /// Cancellation token enables callers to drop out, e.g. if calling from a Reconciler
-    /// that is cancelled.
-    ///
-    /// This function is fallible, including in the case that the control plane is transiently
-    /// unavailable.  A limited number of retries are done internally to efficiently hide short unavailability
-    /// periods, but we don't retry forever.  The **caller** is responsible for handling failures and
-    /// ensuring that they eventually call again to ensure that the compute is eventually notified of
-    /// the proper pageserver nodes for a tenant.
-    #[tracing::instrument(skip_all, fields(tenant_id=%tenant_shard_id.tenant_id, shard_id=%tenant_shard_id.shard_slug(), node_id))]
-    pub(super) async fn notify(
-        &self,
-        tenant_shard_id: TenantShardId,
-        node_id: NodeId,
-        stripe_size: ShardStripeSize,
-        cancel: &CancellationToken,
-    ) -> Result<(), NotifyError> {
-        let mut locked = self.state.lock().await;
-
-        use std::collections::hash_map::Entry;
-        let tenant = match locked.entry(tenant_shard_id.tenant_id) {
-            Entry::Vacant(e) => e.insert(ComputeHookTenant::new(
-                tenant_shard_id,
-                stripe_size,
-                node_id,
-            )),
-            Entry::Occupied(e) => {
-                let tenant = e.into_mut();
-                tenant.update(tenant_shard_id, stripe_size, node_id);
-                tenant
-            }
-        };
-
-        let reconfigure_request = tenant.maybe_reconfigure(tenant_shard_id.tenant_id);
-        let Some(reconfigure_request) = reconfigure_request else {
-            // The tenant doesn't yet have pageservers for all its shards: we won't notify anything
-            // until it does.
-            tracing::info!("Tenant isn't yet ready to emit a notification");
-            return Ok(());
-        };
-
-        if let Some(notify_url) = &self.config.compute_hook_url {
-            self.do_notify(notify_url, reconfigure_request, cancel)
-                .await
-        } else {
-            self.do_notify_local(reconfigure_request)
-                .await
-                .map_err(|e| {
-                    // This path is for testing only, so munge the error into our prod-style error type.
-                    tracing::error!("Local notification hook failed: {e}");
-                    NotifyError::Fatal(StatusCode::INTERNAL_SERVER_ERROR)
-                })
-        }
-    }
-}
-
-#[cfg(test)]
-pub(crate) mod tests {
-    use pageserver_api::shard::{ShardCount, ShardNumber};
-    use utils::id::TenantId;
-
-    use super::*;
-
-    #[test]
-    fn tenant_updates() -> anyhow::Result<()> {
-        let tenant_id = TenantId::generate();
-        let mut tenant_state = ComputeHookTenant::new(
-            TenantShardId {
-                tenant_id,
-                shard_count: ShardCount::new(0),
-                shard_number: ShardNumber(0),
-            },
-            ShardStripeSize(12345),
-            NodeId(1),
-        );
-
-        // An unsharded tenant is always ready to emit a notification
-        assert!(tenant_state.maybe_reconfigure(tenant_id).is_some());
-        assert_eq!(
-            tenant_state
-                .maybe_reconfigure(tenant_id)
-                .unwrap()
-                .shards
-                .len(),
-            1
-        );
-        assert!(tenant_state
-            .maybe_reconfigure(tenant_id)
-            .unwrap()
-            .stripe_size
-            .is_none());
-
-        // Writing the first shard of a multi-sharded situation (i.e. in a split)
-        // resets the tenant state and puts it in an non-notifying state (need to
-        // see all shards)
-        tenant_state.update(
-            TenantShardId {
-                tenant_id,
-                shard_count: ShardCount::new(2),
-                shard_number: ShardNumber(1),
-            },
-            ShardStripeSize(32768),
-            NodeId(1),
-        );
-        assert!(tenant_state.maybe_reconfigure(tenant_id).is_none());
-
-        // Writing the second shard makes it ready to notify
-        tenant_state.update(
-            TenantShardId {
-                tenant_id,
-                shard_count: ShardCount::new(2),
-                shard_number: ShardNumber(0),
-            },
-            ShardStripeSize(32768),
-            NodeId(1),
-        );
-
-        assert!(tenant_state.maybe_reconfigure(tenant_id).is_some());
-        assert_eq!(
-            tenant_state
-                .maybe_reconfigure(tenant_id)
-                .unwrap()
-                .shards
-                .len(),
-            2
-        );
-        assert_eq!(
-            tenant_state
-                .maybe_reconfigure(tenant_id)
-                .unwrap()
-                .stripe_size,
-            Some(ShardStripeSize(32768))
-        );
-
-        Ok(())
-    }
-}

control_plane/attachment_service/src/heartbeater.rs

@@ -1,227 +0,0 @@
-use futures::{stream::FuturesUnordered, StreamExt};
-use std::{
-    collections::HashMap,
-    sync::Arc,
-    time::{Duration, Instant},
-};
-use tokio_util::sync::CancellationToken;
-
-use pageserver_api::{
-    controller_api::{NodeAvailability, UtilizationScore},
-    models::PageserverUtilization,
-};
-
-use thiserror::Error;
-use utils::id::NodeId;
-
-use crate::node::Node;
-
-struct HeartbeaterTask {
-    receiver: tokio::sync::mpsc::UnboundedReceiver<HeartbeatRequest>,
-    cancel: CancellationToken,
-
-    state: HashMap<NodeId, PageserverState>,
-
-    max_unavailable_interval: Duration,
-    jwt_token: Option<String>,
-}
-
-#[derive(Debug, Clone)]
-pub(crate) enum PageserverState {
-    Available {
-        last_seen_at: Instant,
-        utilization: PageserverUtilization,
-    },
-    Offline,
-}
-
-#[derive(Debug)]
-pub(crate) struct AvailablityDeltas(pub Vec<(NodeId, PageserverState)>);
-
-#[derive(Debug, Error)]
-pub(crate) enum HeartbeaterError {
-    #[error("Cancelled")]
-    Cancel,
-}
-
-struct HeartbeatRequest {
-    pageservers: Arc<HashMap<NodeId, Node>>,
-    reply: tokio::sync::oneshot::Sender<Result<AvailablityDeltas, HeartbeaterError>>,
-}
-
-pub(crate) struct Heartbeater {
-    sender: tokio::sync::mpsc::UnboundedSender<HeartbeatRequest>,
-}
-
-impl Heartbeater {
-    pub(crate) fn new(
-        jwt_token: Option<String>,
-        max_unavailable_interval: Duration,
-        cancel: CancellationToken,
-    ) -> Self {
-        let (sender, receiver) = tokio::sync::mpsc::unbounded_channel::<HeartbeatRequest>();
-        let mut heartbeater =
-            HeartbeaterTask::new(receiver, jwt_token, max_unavailable_interval, cancel);
-        tokio::task::spawn(async move { heartbeater.run().await });
-
-        Self { sender }
-    }
-
-    pub(crate) async fn heartbeat(
-        &self,
-        pageservers: Arc<HashMap<NodeId, Node>>,
-    ) -> Result<AvailablityDeltas, HeartbeaterError> {
-        let (sender, receiver) = tokio::sync::oneshot::channel();
-        self.sender
-            .send(HeartbeatRequest {
-                pageservers,
-                reply: sender,
-            })
-            .unwrap();
-
-        receiver.await.unwrap()
-    }
-}
-
-impl HeartbeaterTask {
-    fn new(
-        receiver: tokio::sync::mpsc::UnboundedReceiver<HeartbeatRequest>,
-        jwt_token: Option<String>,
-        max_unavailable_interval: Duration,
-        cancel: CancellationToken,
-    ) -> Self {
-        Self {
-            receiver,
-            cancel,
-            state: HashMap::new(),
-            max_unavailable_interval,
-            jwt_token,
-        }
-    }
-
-    async fn run(&mut self) {
-        loop {
-            tokio::select! {
-                request = self.receiver.recv() => {
-                    match request {
-                        Some(req) => {
-                            let res = self.heartbeat(req.pageservers).await;
-                            req.reply.send(res).unwrap();
-                        },
-                        None => { return; }
-                    }
-                },
-                _ = self.cancel.cancelled() => return
-            }
-        }
-    }
-
-    async fn heartbeat(
-        &mut self,
-        pageservers: Arc<HashMap<NodeId, Node>>,
-    ) -> Result<AvailablityDeltas, HeartbeaterError> {
-        let mut new_state = HashMap::new();
-
-        let mut heartbeat_futs = FuturesUnordered::new();
-        for (node_id, node) in &*pageservers {
-            heartbeat_futs.push({
-                let jwt_token = self.jwt_token.clone();
-                let cancel = self.cancel.clone();
-
-                // Clone the node and mark it as available such that the request
-                // goes through to the pageserver even when the node is marked offline.
-                // This doesn't impact the availability observed by [`crate::service::Service`].
-                let mut node = node.clone();
-                node.set_availability(NodeAvailability::Active(UtilizationScore::worst()));
-
-                async move {
-                    let response = node
-                        .with_client_retries(
-                            |client| async move { client.get_utilization().await },
-                            &jwt_token,
-                            3,
-                            3,
-                            Duration::from_secs(1),
-                            &cancel,
-                        )
-                        .await;
-
-                    let response = match response {
-                        Some(r) => r,
-                        None => {
-                            // This indicates cancellation of the request.
-                            // We ignore the node in this case.
-                            return None;
-                        }
-                    };
-
-                    let status = if let Ok(utilization) = response {
-                        PageserverState::Available {
-                            last_seen_at: Instant::now(),
-                            utilization,
-                        }
-                    } else {
-                        PageserverState::Offline
-                    };
-
-                    Some((*node_id, status))
-                }
-            });
-
-            loop {
-                let maybe_status = tokio::select! {
-                    next = heartbeat_futs.next() => {
-                        match next {
-                            Some(result) => result,
-                            None => { break; }
-                        }
-                    },
-                    _ = self.cancel.cancelled() => { return Err(HeartbeaterError::Cancel); }
-                };
-
-                if let Some((node_id, status)) = maybe_status {
-                    new_state.insert(node_id, status);
-                }
-            }
-        }
-
-        let mut deltas = Vec::new();
-        let now = Instant::now();
-        for (node_id, ps_state) in new_state {
-            use std::collections::hash_map::Entry::*;
-            let entry = self.state.entry(node_id);
-
-            let mut needs_update = false;
-            match entry {
-                Occupied(ref occ) => match (occ.get(), &ps_state) {
-                    (PageserverState::Offline, PageserverState::Offline) => {}
-                    (PageserverState::Available { last_seen_at, .. }, PageserverState::Offline) => {
-                        if now - *last_seen_at >= self.max_unavailable_interval {
-                            deltas.push((node_id, ps_state.clone()));
-                            needs_update = true;
-                        }
-                    }
-                    _ => {
-                        deltas.push((node_id, ps_state.clone()));
-                        needs_update = true;
-                    }
-                },
-                Vacant(_) => {
-                    deltas.push((node_id, ps_state.clone()));
-                }
-            }
-
-            match entry {
-                Occupied(mut occ) if needs_update => {
-                    (*occ.get_mut()) = ps_state;
-                }
-                Vacant(vac) => {
-                    vac.insert(ps_state);
-                }
-                _ => {}
-            }
-        }
-
-        Ok(AvailablityDeltas(deltas))
-    }
-}

control_plane/attachment_service/src/http.rs

@@ -1,871 +0,0 @@
-use crate::metrics::{
-    HttpRequestLatencyLabelGroup, HttpRequestStatusLabelGroup, PageserverRequestLabelGroup,
-    METRICS_REGISTRY,
-};
-use crate::reconciler::ReconcileError;
-use crate::service::{Service, STARTUP_RECONCILE_TIMEOUT};
-use futures::Future;
-use hyper::header::CONTENT_TYPE;
-use hyper::{Body, Request, Response};
-use hyper::{StatusCode, Uri};
-use pageserver_api::models::{
-    TenantConfigRequest, TenantCreateRequest, TenantLocationConfigRequest, TenantShardSplitRequest,
-    TenantTimeTravelRequest, TimelineCreateRequest,
-};
-use pageserver_api::shard::TenantShardId;
-use pageserver_client::mgmt_api;
-use std::sync::Arc;
-use std::time::{Duration, Instant};
-use tokio_util::sync::CancellationToken;
-use utils::auth::{Scope, SwappableJwtAuth};
-use utils::failpoint_support::failpoints_handler;
-use utils::http::endpoint::{auth_middleware, check_permission_with, request_span};
-use utils::http::request::{must_get_query_param, parse_query_param, parse_request_param};
-use utils::id::{TenantId, TimelineId};
-
-use utils::{
-    http::{
-        endpoint::{self},
-        error::ApiError,
-        json::{json_request, json_response},
-        RequestExt, RouterBuilder,
-    },
-    id::NodeId,
-};
-
-use pageserver_api::controller_api::{
-    NodeAvailability, NodeConfigureRequest, NodeRegisterRequest, TenantPolicyRequest,
-    TenantShardMigrateRequest,
-};
-use pageserver_api::upcall_api::{ReAttachRequest, ValidateRequest};
-
-use control_plane::storage_controller::{AttachHookRequest, InspectRequest};
-
-use routerify::Middleware;
-
-/// State available to HTTP request handlers
-#[derive(Clone)]
-pub struct HttpState {
-    service: Arc<crate::service::Service>,
-    auth: Option<Arc<SwappableJwtAuth>>,
-    allowlist_routes: Vec<Uri>,
-}
-
-impl HttpState {
-    pub fn new(service: Arc<crate::service::Service>, auth: Option<Arc<SwappableJwtAuth>>) -> Self {
-        let allowlist_routes = ["/status", "/ready", "/metrics"]
-            .iter()
-            .map(|v| v.parse().unwrap())
-            .collect::<Vec<_>>();
-        Self {
-            service,
-            auth,
-            allowlist_routes,
-        }
-    }
-}
-
-#[inline(always)]
-fn get_state(request: &Request<Body>) -> &HttpState {
-    request
-        .data::<Arc<HttpState>>()
-        .expect("unknown state type")
-        .as_ref()
-}
-
-/// Pageserver calls into this on startup, to learn which tenants it should attach
-async fn handle_re_attach(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::GenerationsApi)?;
-
-    let reattach_req = json_request::<ReAttachRequest>(&mut req).await?;
-    let state = get_state(&req);
-    json_response(StatusCode::OK, state.service.re_attach(reattach_req).await?)
-}
-
-/// Pageserver calls into this before doing deletions, to confirm that it still
-/// holds the latest generation for the tenants with deletions enqueued
-async fn handle_validate(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::GenerationsApi)?;
-
-    let validate_req = json_request::<ValidateRequest>(&mut req).await?;
-    let state = get_state(&req);
-    json_response(StatusCode::OK, state.service.validate(validate_req))
-}
-
-/// Call into this before attaching a tenant to a pageserver, to acquire a generation number
-/// (in the real control plane this is unnecessary, because the same program is managing
-///  generation numbers and doing attachments).
-async fn handle_attach_hook(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let attach_req = json_request::<AttachHookRequest>(&mut req).await?;
-    let state = get_state(&req);
-
-    json_response(
-        StatusCode::OK,
-        state
-            .service
-            .attach_hook(attach_req)
-            .await
-            .map_err(ApiError::InternalServerError)?,
-    )
-}
-
-async fn handle_inspect(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let inspect_req = json_request::<InspectRequest>(&mut req).await?;
-
-    let state = get_state(&req);
-
-    json_response(StatusCode::OK, state.service.inspect(inspect_req))
-}
-
-async fn handle_tenant_create(
-    service: Arc<Service>,
-    mut req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    let create_req = json_request::<TenantCreateRequest>(&mut req).await?;
-
-    json_response(
-        StatusCode::CREATED,
-        service.tenant_create(create_req).await?,
-    )
-}
-
-// For tenant and timeline deletions, which both implement an "initially return 202, then 404 once
-// we're done" semantic, we wrap with a retry loop to expose a simpler API upstream.  This avoids
-// needing to track a "deleting" state for tenants.
-async fn deletion_wrapper<R, F>(service: Arc<Service>, f: F) -> Result<Response<Body>, ApiError>
-where
-    R: std::future::Future<Output = Result<StatusCode, ApiError>> + Send + 'static,
-    F: Fn(Arc<Service>) -> R + Send + Sync + 'static,
-{
-    let started_at = Instant::now();
-    // To keep deletion reasonably snappy for small tenants, initially check after 1 second if deletion
-    // completed.
-    let mut retry_period = Duration::from_secs(1);
-    // On subsequent retries, wait longer.
-    let max_retry_period = Duration::from_secs(5);
-    // Enable callers with a 30 second request timeout to reliably get a response
-    let max_wait = Duration::from_secs(25);
-
-    loop {
-        let status = f(service.clone()).await?;
-        match status {
-            StatusCode::ACCEPTED => {
-                tracing::info!("Deletion accepted, waiting to try again...");
-                tokio::time::sleep(retry_period).await;
-                retry_period = max_retry_period;
-            }
-            StatusCode::NOT_FOUND => {
-                tracing::info!("Deletion complete");
-                return json_response(StatusCode::OK, ());
-            }
-            _ => {
-                tracing::warn!("Unexpected status {status}");
-                return json_response(status, ());
-            }
-        }
-
-        let now = Instant::now();
-        if now + retry_period > started_at + max_wait {
-            tracing::info!("Deletion timed out waiting for 404");
-            // REQUEST_TIMEOUT would be more appropriate, but CONFLICT is already part of
-            // the pageserver's swagger definition for this endpoint, and has the same desired
-            // effect of causing the control plane to retry later.
-            return json_response(StatusCode::CONFLICT, ());
-        }
-    }
-}
-
-async fn handle_tenant_location_config(
-    service: Arc<Service>,
-    mut req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    let tenant_shard_id: TenantShardId = parse_request_param(&req, "tenant_shard_id")?;
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    let config_req = json_request::<TenantLocationConfigRequest>(&mut req).await?;
-    json_response(
-        StatusCode::OK,
-        service
-            .tenant_location_config(tenant_shard_id, config_req)
-            .await?,
-    )
-}
-
-async fn handle_tenant_config_set(
-    service: Arc<Service>,
-    mut req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    let config_req = json_request::<TenantConfigRequest>(&mut req).await?;
-
-    json_response(StatusCode::OK, service.tenant_config_set(config_req).await?)
-}
-
-async fn handle_tenant_config_get(
-    service: Arc<Service>,
-    req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    json_response(StatusCode::OK, service.tenant_config_get(tenant_id)?)
-}
-
-async fn handle_tenant_time_travel_remote_storage(
-    service: Arc<Service>,
-    mut req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    let time_travel_req = json_request::<TenantTimeTravelRequest>(&mut req).await?;
-
-    let timestamp_raw = must_get_query_param(&req, "travel_to")?;
-    let _timestamp = humantime::parse_rfc3339(&timestamp_raw).map_err(|_e| {
-        ApiError::BadRequest(anyhow::anyhow!(
-            "Invalid time for travel_to: {timestamp_raw:?}"
-        ))
-    })?;
-
-    let done_if_after_raw = must_get_query_param(&req, "done_if_after")?;
-    let _done_if_after = humantime::parse_rfc3339(&done_if_after_raw).map_err(|_e| {
-        ApiError::BadRequest(anyhow::anyhow!(
-            "Invalid time for done_if_after: {done_if_after_raw:?}"
-        ))
-    })?;
-
-    service
-        .tenant_time_travel_remote_storage(
-            &time_travel_req,
-            tenant_id,
-            timestamp_raw,
-            done_if_after_raw,
-        )
-        .await?;
-    json_response(StatusCode::OK, ())
-}
-
-async fn handle_tenant_secondary_download(
-    service: Arc<Service>,
-    req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    let wait = parse_query_param(&req, "wait_ms")?.map(Duration::from_millis);
-
-    let (status, progress) = service.tenant_secondary_download(tenant_id, wait).await?;
-    json_response(status, progress)
-}
-
-async fn handle_tenant_delete(
-    service: Arc<Service>,
-    req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    deletion_wrapper(service, move |service| async move {
-        service.tenant_delete(tenant_id).await
-    })
-    .await
-}
-
-async fn handle_tenant_timeline_create(
-    service: Arc<Service>,
-    mut req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    let create_req = json_request::<TimelineCreateRequest>(&mut req).await?;
-    json_response(
-        StatusCode::CREATED,
-        service
-            .tenant_timeline_create(tenant_id, create_req)
-            .await?,
-    )
-}
-
-async fn handle_tenant_timeline_delete(
-    service: Arc<Service>,
-    req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    let timeline_id: TimelineId = parse_request_param(&req, "timeline_id")?;
-
-    deletion_wrapper(service, move |service| async move {
-        service.tenant_timeline_delete(tenant_id, timeline_id).await
-    })
-    .await
-}
-
-async fn handle_tenant_timeline_passthrough(
-    service: Arc<Service>,
-    req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    let Some(path) = req.uri().path_and_query() else {
-        // This should never happen, our request router only calls us if there is a path
-        return Err(ApiError::BadRequest(anyhow::anyhow!("Missing path")));
-    };
-
-    tracing::info!("Proxying request for tenant {} ({})", tenant_id, path);
-
-    // Find the node that holds shard zero
-    let (node, tenant_shard_id) = service.tenant_shard0_node(tenant_id)?;
-
-    // Callers will always pass an unsharded tenant ID.  Before proxying, we must
-    // rewrite this to a shard-aware shard zero ID.
-    let path = format!("{}", path);
-    let tenant_str = tenant_id.to_string();
-    let tenant_shard_str = format!("{}", tenant_shard_id);
-    let path = path.replace(&tenant_str, &tenant_shard_str);
-
-    let latency = &METRICS_REGISTRY
-        .metrics_group
-        .storage_controller_passthrough_request_latency;
-
-    // This is a bit awkward. We remove the param from the request
-    // and join the words by '_' to get a label for the request.
-    let just_path = path.replace(&tenant_shard_str, "");
-    let path_label = just_path
-        .split('/')
-        .filter(|token| !token.is_empty())
-        .collect::<Vec<_>>()
-        .join("_");
-    let labels = PageserverRequestLabelGroup {
-        pageserver_id: &node.get_id().to_string(),
-        path: &path_label,
-        method: crate::metrics::Method::Get,
-    };
-
-    let _timer = latency.start_timer(labels.clone());
-
-    let client = mgmt_api::Client::new(node.base_url(), service.get_config().jwt_token.as_deref());
-    let resp = client.get_raw(path).await.map_err(|_e|
-        // FIXME: give APiError a proper Unavailable variant.  We return 503 here because
-        // if we can't successfully send a request to the pageserver, we aren't available.
-        ApiError::ShuttingDown)?;
-
-    if !resp.status().is_success() {
-        let error_counter = &METRICS_REGISTRY
-            .metrics_group
-            .storage_controller_passthrough_request_error;
-        error_counter.inc(labels);
-    }
-
-    // We have a reqest::Response, would like a http::Response
-    let mut builder = hyper::Response::builder()
-        .status(resp.status())
-        .version(resp.version());
-    for (k, v) in resp.headers() {
-        builder = builder.header(k, v);
-    }
-
-    let response = builder
-        .body(Body::wrap_stream(resp.bytes_stream()))
-        .map_err(|e| ApiError::InternalServerError(e.into()))?;
-
-    Ok(response)
-}
-
-async fn handle_tenant_locate(
-    service: Arc<Service>,
-    req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    json_response(StatusCode::OK, service.tenant_locate(tenant_id)?)
-}
-
-async fn handle_tenant_describe(
-    service: Arc<Service>,
-    req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    json_response(StatusCode::OK, service.tenant_describe(tenant_id)?)
-}
-
-async fn handle_node_register(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let register_req = json_request::<NodeRegisterRequest>(&mut req).await?;
-    let state = get_state(&req);
-    state.service.node_register(register_req).await?;
-    json_response(StatusCode::OK, ())
-}
-
-async fn handle_node_list(req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let state = get_state(&req);
-    json_response(StatusCode::OK, state.service.node_list().await?)
-}
-
-async fn handle_node_drop(req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let state = get_state(&req);
-    let node_id: NodeId = parse_request_param(&req, "node_id")?;
-    json_response(StatusCode::OK, state.service.node_drop(node_id).await?)
-}
-
-async fn handle_node_configure(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let node_id: NodeId = parse_request_param(&req, "node_id")?;
-    let config_req = json_request::<NodeConfigureRequest>(&mut req).await?;
-    if node_id != config_req.node_id {
-        return Err(ApiError::BadRequest(anyhow::anyhow!(
-            "Path and body node_id differ"
-        )));
-    }
-    let state = get_state(&req);
-
-    json_response(
-        StatusCode::OK,
-        state
-            .service
-            .node_configure(
-                config_req.node_id,
-                config_req.availability.map(NodeAvailability::from),
-                config_req.scheduling,
-            )
-            .await?,
-    )
-}
-
-async fn handle_tenant_shard_split(
-    service: Arc<Service>,
-    mut req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    let split_req = json_request::<TenantShardSplitRequest>(&mut req).await?;
-
-    json_response(
-        StatusCode::OK,
-        service.tenant_shard_split(tenant_id, split_req).await?,
-    )
-}
-
-async fn handle_tenant_shard_migrate(
-    service: Arc<Service>,
-    mut req: Request<Body>,
-) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let tenant_shard_id: TenantShardId = parse_request_param(&req, "tenant_shard_id")?;
-    let migrate_req = json_request::<TenantShardMigrateRequest>(&mut req).await?;
-    json_response(
-        StatusCode::OK,
-        service
-            .tenant_shard_migrate(tenant_shard_id, migrate_req)
-            .await?,
-    )
-}
-
-async fn handle_tenant_update_policy(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    let update_req = json_request::<TenantPolicyRequest>(&mut req).await?;
-    let state = get_state(&req);
-
-    json_response(
-        StatusCode::OK,
-        state
-            .service
-            .tenant_update_policy(tenant_id, update_req)
-            .await?,
-    )
-}
-
-async fn handle_tenant_drop(req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    let tenant_id: TenantId = parse_request_param(&req, "tenant_id")?;
-    check_permissions(&req, Scope::PageServerApi)?;
-
-    let state = get_state(&req);
-
-    json_response(StatusCode::OK, state.service.tenant_drop(tenant_id).await?)
-}
-
-async fn handle_tenants_dump(req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let state = get_state(&req);
-    state.service.tenants_dump()
-}
-
-async fn handle_scheduler_dump(req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let state = get_state(&req);
-    state.service.scheduler_dump()
-}
-
-async fn handle_consistency_check(req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let state = get_state(&req);
-
-    json_response(StatusCode::OK, state.service.consistency_check().await?)
-}
-
-async fn handle_reconcile_all(req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    check_permissions(&req, Scope::Admin)?;
-
-    let state = get_state(&req);
-
-    json_response(StatusCode::OK, state.service.reconcile_all_now().await?)
-}
-
-/// Status endpoint is just used for checking that our HTTP listener is up
-async fn handle_status(_req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    json_response(StatusCode::OK, ())
-}
-
-/// Readiness endpoint indicates when we're done doing startup I/O (e.g. reconciling
-/// with remote pageserver nodes).  This is intended for use as a kubernetes readiness probe.
-async fn handle_ready(req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    let state = get_state(&req);
-    if state.service.startup_complete.is_ready() {
-        json_response(StatusCode::OK, ())
-    } else {
-        json_response(StatusCode::SERVICE_UNAVAILABLE, ())
-    }
-}
-
-impl From<ReconcileError> for ApiError {
-    fn from(value: ReconcileError) -> Self {
-        ApiError::Conflict(format!("Reconciliation error: {}", value))
-    }
-}
-
-/// Common wrapper for request handlers that call into Service and will operate on tenants: they must only
-/// be allowed to run if Service has finished its initial reconciliation.
-async fn tenant_service_handler<R, H>(
-    request: Request<Body>,
-    handler: H,
-    request_name: RequestName,
-) -> R::Output
-where
-    R: std::future::Future<Output = Result<Response<Body>, ApiError>> + Send + 'static,
-    H: FnOnce(Arc<Service>, Request<Body>) -> R + Send + Sync + 'static,
-{
-    let state = get_state(&request);
-    let service = state.service.clone();
-
-    let startup_complete = service.startup_complete.clone();
-    if tokio::time::timeout(STARTUP_RECONCILE_TIMEOUT, startup_complete.wait())
-        .await
-        .is_err()
-    {
-        // This shouldn't happen: it is the responsibilty of [`Service::startup_reconcile`] to use appropriate
-        // timeouts around its remote calls, to bound its runtime.
-        return Err(ApiError::Timeout(
-            "Timed out waiting for service readiness".into(),
-        ));
-    }
-
-    named_request_span(
-        request,
-        |request| async move { handler(service, request).await },
-        request_name,
-    )
-    .await
-}
-
-fn check_permissions(request: &Request<Body>, required_scope: Scope) -> Result<(), ApiError> {
-    check_permission_with(request, |claims| {
-        crate::auth::check_permission(claims, required_scope)
-    })
-}
-
-#[derive(Clone, Debug)]
-struct RequestMeta {
-    method: hyper::http::Method,
-    at: Instant,
-}
-
-fn prologue_metrics_middleware<B: hyper::body::HttpBody + Send + Sync + 'static>(
-) -> Middleware<B, ApiError> {
-    Middleware::pre(move |req| async move {
-        let meta = RequestMeta {
-            method: req.method().clone(),
-            at: Instant::now(),
-        };
-
-        req.set_context(meta);
-
-        Ok(req)
-    })
-}
-
-fn epilogue_metrics_middleware<B: hyper::body::HttpBody + Send + Sync + 'static>(
-) -> Middleware<B, ApiError> {
-    Middleware::post_with_info(move |resp, req_info| async move {
-        let request_name = match req_info.context::<RequestName>() {
-            Some(name) => name,
-            None => {
-                return Ok(resp);
-            }
-        };
-
-        if let Some(meta) = req_info.context::<RequestMeta>() {
-            let status = &crate::metrics::METRICS_REGISTRY
-                .metrics_group
-                .storage_controller_http_request_status;
-            let latency = &crate::metrics::METRICS_REGISTRY
-                .metrics_group
-                .storage_controller_http_request_latency;
-
-            status.inc(HttpRequestStatusLabelGroup {
-                path: request_name.0,
-                method: meta.method.clone().into(),
-                status: crate::metrics::StatusCode(resp.status()),
-            });
-
-            latency.observe(
-                HttpRequestLatencyLabelGroup {
-                    path: request_name.0,
-                    method: meta.method.into(),
-                },
-                meta.at.elapsed().as_secs_f64(),
-            );
-        }
-        Ok(resp)
-    })
-}
-
-pub async fn measured_metrics_handler(_req: Request<Body>) -> Result<Response<Body>, ApiError> {
-    pub const TEXT_FORMAT: &str = "text/plain; version=0.0.4";
-
-    let payload = crate::metrics::METRICS_REGISTRY.encode();
-    let response = Response::builder()
-        .status(200)
-        .header(CONTENT_TYPE, TEXT_FORMAT)
-        .body(payload.into())
-        .unwrap();
-
-    Ok(response)
-}
-
-#[derive(Clone)]
-struct RequestName(&'static str);
-
-async fn named_request_span<R, H>(
-    request: Request<Body>,
-    handler: H,
-    name: RequestName,
-) -> R::Output
-where
-    R: Future<Output = Result<Response<Body>, ApiError>> + Send + 'static,
-    H: FnOnce(Request<Body>) -> R + Send + Sync + 'static,
-{
-    request.set_context(name);
-    request_span(request, handler).await
-}
-
-pub fn make_router(
-    service: Arc<Service>,
-    auth: Option<Arc<SwappableJwtAuth>>,
-) -> RouterBuilder<hyper::Body, ApiError> {
-    let mut router = endpoint::make_router()
-        .middleware(prologue_metrics_middleware())
-        .middleware(epilogue_metrics_middleware());
-    if auth.is_some() {
-        router = router.middleware(auth_middleware(|request| {
-            let state = get_state(request);
-            if state.allowlist_routes.contains(request.uri()) {
-                None
-            } else {
-                state.auth.as_deref()
-            }
-        }));
-    }
-
-    router
-        .data(Arc::new(HttpState::new(service, auth)))
-        .get("/metrics", |r| {
-            named_request_span(r, measured_metrics_handler, RequestName("metrics"))
-        })
-        // Non-prefixed generic endpoints (status, metrics)
-        .get("/status", |r| {
-            named_request_span(r, handle_status, RequestName("status"))
-        })
-        .get("/ready", |r| {
-            named_request_span(r, handle_ready, RequestName("ready"))
-        })
-        // Upcalls for the pageserver: point the pageserver's `control_plane_api` config to this prefix
-        .post("/upcall/v1/re-attach", |r| {
-            named_request_span(r, handle_re_attach, RequestName("upcall_v1_reattach"))
-        })
-        .post("/upcall/v1/validate", |r| {
-            named_request_span(r, handle_validate, RequestName("upcall_v1_validate"))
-        })
-        // Test/dev/debug endpoints
-        .post("/debug/v1/attach-hook", |r| {
-            named_request_span(r, handle_attach_hook, RequestName("debug_v1_attach_hook"))
-        })
-        .post("/debug/v1/inspect", |r| {
-            named_request_span(r, handle_inspect, RequestName("debug_v1_inspect"))
-        })
-        .post("/debug/v1/tenant/:tenant_id/drop", |r| {
-            named_request_span(r, handle_tenant_drop, RequestName("debug_v1_tenant_drop"))
-        })
-        .post("/debug/v1/node/:node_id/drop", |r| {
-            named_request_span(r, handle_node_drop, RequestName("debug_v1_node_drop"))
-        })
-        .get("/debug/v1/tenant", |r| {
-            named_request_span(r, handle_tenants_dump, RequestName("debug_v1_tenant"))
-        })
-        .get("/debug/v1/tenant/:tenant_id/locate", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_locate,
-                RequestName("debug_v1_tenant_locate"),
-            )
-        })
-        .get("/debug/v1/scheduler", |r| {
-            named_request_span(r, handle_scheduler_dump, RequestName("debug_v1_scheduler"))
-        })
-        .post("/debug/v1/consistency_check", |r| {
-            named_request_span(
-                r,
-                handle_consistency_check,
-                RequestName("debug_v1_consistency_check"),
-            )
-        })
-        .post("/debug/v1/reconcile_all", |r| {
-            request_span(r, handle_reconcile_all)
-        })
-        .put("/debug/v1/failpoints", |r| {
-            request_span(r, |r| failpoints_handler(r, CancellationToken::new()))
-        })
-        // Node operations
-        .post("/control/v1/node", |r| {
-            named_request_span(r, handle_node_register, RequestName("control_v1_node"))
-        })
-        .get("/control/v1/node", |r| {
-            named_request_span(r, handle_node_list, RequestName("control_v1_node"))
-        })
-        .put("/control/v1/node/:node_id/config", |r| {
-            named_request_span(
-                r,
-                handle_node_configure,
-                RequestName("control_v1_node_config"),
-            )
-        })
-        // Tenant Shard operations
-        .put("/control/v1/tenant/:tenant_shard_id/migrate", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_shard_migrate,
-                RequestName("control_v1_tenant_migrate"),
-            )
-        })
-        .put("/control/v1/tenant/:tenant_id/shard_split", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_shard_split,
-                RequestName("control_v1_tenant_shard_split"),
-            )
-        })
-        .get("/control/v1/tenant/:tenant_id", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_describe,
-                RequestName("control_v1_tenant_describe"),
-            )
-        })
-        .put("/control/v1/tenant/:tenant_id/policy", |r| {
-            named_request_span(
-                r,
-                handle_tenant_update_policy,
-                RequestName("control_v1_tenant_policy"),
-            )
-        })
-        // Tenant operations
-        // The ^/v1/ endpoints act as a "Virtual Pageserver", enabling shard-naive clients to call into
-        // this service to manage tenants that actually consist of many tenant shards, as if they are a single entity.
-        .post("/v1/tenant", |r| {
-            tenant_service_handler(r, handle_tenant_create, RequestName("v1_tenant"))
-        })
-        .delete("/v1/tenant/:tenant_id", |r| {
-            tenant_service_handler(r, handle_tenant_delete, RequestName("v1_tenant"))
-        })
-        .put("/v1/tenant/config", |r| {
-            tenant_service_handler(r, handle_tenant_config_set, RequestName("v1_tenant_config"))
-        })
-        .get("/v1/tenant/:tenant_id/config", |r| {
-            tenant_service_handler(r, handle_tenant_config_get, RequestName("v1_tenant_config"))
-        })
-        .put("/v1/tenant/:tenant_shard_id/location_config", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_location_config,
-                RequestName("v1_tenant_location_config"),
-            )
-        })
-        .put("/v1/tenant/:tenant_id/time_travel_remote_storage", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_time_travel_remote_storage,
-                RequestName("v1_tenant_time_travel_remote_storage"),
-            )
-        })
-        .post("/v1/tenant/:tenant_id/secondary/download", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_secondary_download,
-                RequestName("v1_tenant_secondary_download"),
-            )
-        })
-        // Timeline operations
-        .delete("/v1/tenant/:tenant_id/timeline/:timeline_id", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_timeline_delete,
-                RequestName("v1_tenant_timeline"),
-            )
-        })
-        .post("/v1/tenant/:tenant_id/timeline", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_timeline_create,
-                RequestName("v1_tenant_timeline"),
-            )
-        })
-        // Tenant detail GET passthrough to shard zero
-        .get("/v1/tenant/:tenant_id", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_timeline_passthrough,
-                RequestName("v1_tenant_passthrough"),
-            )
-        })
-        // Timeline GET passthrough to shard zero.  Note that the `*` in the URL is a wildcard: any future
-        // timeline GET APIs will be implicitly included.
-        .get("/v1/tenant/:tenant_id/timeline*", |r| {
-            tenant_service_handler(
-                r,
-                handle_tenant_timeline_passthrough,
-                RequestName("v1_tenant_timeline_passthrough"),
-            )
-        })
-}

control_plane/attachment_service/src/id_lock_map.rs

@@ -1,54 +0,0 @@
-use std::{collections::HashMap, sync::Arc};
-
-/// A map of locks covering some arbitrary identifiers. Useful if you have a collection of objects but don't
-/// want to embed a lock in each one, or if your locking granularity is different to your object granularity.
-/// For example, used in the storage controller where the objects are tenant shards, but sometimes locking
-/// is needed at a tenant-wide granularity.
-pub(crate) struct IdLockMap<T>
-where
-    T: Eq + PartialEq + std::hash::Hash,
-{
-    /// A synchronous lock for getting/setting the async locks that our callers will wait on.
-    entities: std::sync::Mutex<std::collections::HashMap<T, Arc<tokio::sync::RwLock<()>>>>,
-}
-
-impl<T> IdLockMap<T>
-where
-    T: Eq + PartialEq + std::hash::Hash,
-{
-    pub(crate) fn shared(
-        &self,
-        key: T,
-    ) -> impl std::future::Future<Output = tokio::sync::OwnedRwLockReadGuard<()>> {
-        let mut locked = self.entities.lock().unwrap();
-        let entry = locked.entry(key).or_default();
-        entry.clone().read_owned()
-    }
-
-    pub(crate) fn exclusive(
-        &self,
-        key: T,
-    ) -> impl std::future::Future<Output = tokio::sync::OwnedRwLockWriteGuard<()>> {
-        let mut locked = self.entities.lock().unwrap();
-        let entry = locked.entry(key).or_default();
-        entry.clone().write_owned()
-    }
-
-    /// Rather than building a lock guard that re-takes the [`Self::entities`] lock, we just do
-    /// periodic housekeeping to avoid the map growing indefinitely
-    pub(crate) fn housekeeping(&self) {
-        let mut locked = self.entities.lock().unwrap();
-        locked.retain(|_k, lock| lock.try_write().is_err())
-    }
-}
-
-impl<T> Default for IdLockMap<T>
-where
-    T: Eq + PartialEq + std::hash::Hash,
-{
-    fn default() -> Self {
-        Self {
-            entities: std::sync::Mutex::new(HashMap::new()),
-        }
-    }
-}

control_plane/attachment_service/src/lib.rs

@@ -1,54 +0,0 @@
-use serde::Serialize;
-use utils::seqwait::MonotonicCounter;
-
-mod auth;
-mod compute_hook;
-mod heartbeater;
-pub mod http;
-mod id_lock_map;
-pub mod metrics;
-mod node;
-mod pageserver_client;
-pub mod persistence;
-mod reconciler;
-mod scheduler;
-mod schema;
-pub mod service;
-mod tenant_state;
-
-#[derive(Ord, PartialOrd, Eq, PartialEq, Copy, Clone, Serialize)]
-struct Sequence(u64);
-
-impl Sequence {
-    fn initial() -> Self {
-        Self(0)
-    }
-}
-
-impl std::fmt::Display for Sequence {
-    fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
-        write!(f, "{}", self.0)
-    }
-}
-
-impl std::fmt::Debug for Sequence {
-    fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
-        write!(f, "{}", self.0)
-    }
-}
-
-impl MonotonicCounter<Sequence> for Sequence {
-    fn cnt_advance(&mut self, v: Sequence) {
-        assert!(*self <= v);
-        *self = v;
-    }
-    fn cnt_value(&self) -> Sequence {
-        *self
-    }
-}
-
-impl Sequence {
-    fn next(&self) -> Sequence {
-        Sequence(self.0 + 1)
-    }
-}

control_plane/attachment_service/src/main.rs

@@ -1,302 +0,0 @@
-use anyhow::{anyhow, Context};
-use attachment_service::http::make_router;
-use attachment_service::metrics::preinitialize_metrics;
-use attachment_service::persistence::Persistence;
-use attachment_service::service::{Config, Service, MAX_UNAVAILABLE_INTERVAL_DEFAULT};
-use camino::Utf8PathBuf;
-use clap::Parser;
-use diesel::Connection;
-use metrics::launch_timestamp::LaunchTimestamp;
-use std::sync::Arc;
-use tokio::signal::unix::SignalKind;
-use tokio_util::sync::CancellationToken;
-use utils::auth::{JwtAuth, SwappableJwtAuth};
-use utils::logging::{self, LogFormat};
-
-use utils::{project_build_tag, project_git_version, tcp_listener};
-
-project_git_version!(GIT_VERSION);
-project_build_tag!(BUILD_TAG);
-
-use diesel_migrations::{embed_migrations, EmbeddedMigrations};
-pub const MIGRATIONS: EmbeddedMigrations = embed_migrations!("./migrations");
-
-#[derive(Parser)]
-#[command(author, version, about, long_about = None)]
-#[command(arg_required_else_help(true))]
-struct Cli {
-    /// Host and port to listen on, like `127.0.0.1:1234`
-    #[arg(short, long)]
-    listen: std::net::SocketAddr,
-
-    /// Public key for JWT authentication of clients
-    #[arg(long)]
-    public_key: Option<String>,
-
-    /// Token for authenticating this service with the pageservers it controls
-    #[arg(long)]
-    jwt_token: Option<String>,
-
-    /// Token for authenticating this service with the control plane, when calling
-    /// the compute notification endpoint
-    #[arg(long)]
-    control_plane_jwt_token: Option<String>,
-
-    /// URL to control plane compute notification endpoint
-    #[arg(long)]
-    compute_hook_url: Option<String>,
-
-    /// Path to the .json file to store state (will be created if it doesn't exist)
-    #[arg(short, long)]
-    path: Option<Utf8PathBuf>,
-
-    /// URL to connect to postgres, like postgresql://localhost:1234/attachment_service
-    #[arg(long)]
-    database_url: Option<String>,
-
-    /// Flag to enable dev mode, which permits running without auth
-    #[arg(long, default_value = "false")]
-    dev: bool,
-
-    /// Grace period before marking unresponsive pageserver offline
-    #[arg(long)]
-    max_unavailable_interval: Option<humantime::Duration>,
-}
-
-enum StrictMode {
-    /// In strict mode, we will require that all secrets are loaded, i.e. security features
-    /// may not be implicitly turned off by omitting secrets in the environment.
-    Strict,
-    /// In dev mode, secrets are optional, and omitting a particular secret will implicitly
-    /// disable the auth related to it (e.g. no pageserver jwt key -> send unauthenticated
-    /// requests, no public key -> don't authenticate incoming requests).
-    Dev,
-}
-
-impl Default for StrictMode {
-    fn default() -> Self {
-        Self::Strict
-    }
-}
-
-/// Secrets may either be provided on the command line (for testing), or loaded from AWS SecretManager: this
-/// type encapsulates the logic to decide which and do the loading.
-struct Secrets {
-    database_url: String,
-    public_key: Option<JwtAuth>,
-    jwt_token: Option<String>,
-    control_plane_jwt_token: Option<String>,
-}
-
-impl Secrets {
-    const DATABASE_URL_ENV: &'static str = "DATABASE_URL";
-    const PAGESERVER_JWT_TOKEN_ENV: &'static str = "PAGESERVER_JWT_TOKEN";
-    const CONTROL_PLANE_JWT_TOKEN_ENV: &'static str = "CONTROL_PLANE_JWT_TOKEN";
-    const PUBLIC_KEY_ENV: &'static str = "PUBLIC_KEY";
-
-    /// Load secrets from, in order of preference:
-    /// - CLI args if database URL is provided on the CLI
-    /// - Environment variables if DATABASE_URL is set.
-    /// - AWS Secrets Manager secrets
-    async fn load(args: &Cli) -> anyhow::Result<Self> {
-        let Some(database_url) =
-            Self::load_secret(&args.database_url, Self::DATABASE_URL_ENV).await
-        else {
-            anyhow::bail!(
-                "Database URL is not set (set `--database-url`, or `DATABASE_URL` environment)"
-            )
-        };
-
-        let public_key = match Self::load_secret(&args.public_key, Self::PUBLIC_KEY_ENV).await {
-            Some(v) => Some(JwtAuth::from_key(v).context("Loading public key")?),
-            None => None,
-        };
-
-        let this = Self {
-            database_url,
-            public_key,
-            jwt_token: Self::load_secret(&args.jwt_token, Self::PAGESERVER_JWT_TOKEN_ENV).await,
-            control_plane_jwt_token: Self::load_secret(
-                &args.control_plane_jwt_token,
-                Self::CONTROL_PLANE_JWT_TOKEN_ENV,
-            )
-            .await,
-        };
-
-        Ok(this)
-    }
-
-    async fn load_secret(cli: &Option<String>, env_name: &str) -> Option<String> {
-        if let Some(v) = cli {
-            Some(v.clone())
-        } else if let Ok(v) = std::env::var(env_name) {
-            Some(v)
-        } else {
-            None
-        }
-    }
-}
-
-/// Execute the diesel migrations that are built into this binary
-async fn migration_run(database_url: &str) -> anyhow::Result<()> {
-    use diesel::PgConnection;
-    use diesel_migrations::{HarnessWithOutput, MigrationHarness};
-    let mut conn = PgConnection::establish(database_url)?;
-
-    HarnessWithOutput::write_to_stdout(&mut conn)
-        .run_pending_migrations(MIGRATIONS)
-        .map(|_| ())
-        .map_err(|e| anyhow::anyhow!(e))?;
-
-    Ok(())
-}
-
-fn main() -> anyhow::Result<()> {
-    let default_panic = std::panic::take_hook();
-    std::panic::set_hook(Box::new(move |info| {
-        default_panic(info);
-        std::process::exit(1);
-    }));
-
-    tokio::runtime::Builder::new_current_thread()
-        // We use spawn_blocking for database operations, so require approximately
-        // as many blocking threads as we will open database connections.
-        .max_blocking_threads(Persistence::MAX_CONNECTIONS as usize)
-        .enable_all()
-        .build()
-        .unwrap()
-        .block_on(async_main())
-}
-
-async fn async_main() -> anyhow::Result<()> {
-    let launch_ts = Box::leak(Box::new(LaunchTimestamp::generate()));
-
-    logging::init(
-        LogFormat::Plain,
-        logging::TracingErrorLayerEnablement::Disabled,
-        logging::Output::Stdout,
-    )?;
-
-    preinitialize_metrics();
-
-    let args = Cli::parse();
-    tracing::info!(
-        "version: {}, launch_timestamp: {}, build_tag {}, state at {}, listening on {}",
-        GIT_VERSION,
-        launch_ts.to_string(),
-        BUILD_TAG,
-        args.path.as_ref().unwrap_or(&Utf8PathBuf::from("<none>")),
-        args.listen
-    );
-
-    let strict_mode = if args.dev {
-        StrictMode::Dev
-    } else {
-        StrictMode::Strict
-    };
-
-    let secrets = Secrets::load(&args).await?;
-
-    // Validate required secrets and arguments are provided in strict mode
-    match strict_mode {
-        StrictMode::Strict
-            if (secrets.public_key.is_none()
-                || secrets.jwt_token.is_none()
-                || secrets.control_plane_jwt_token.is_none()) =>
-        {
-            // Production systems should always have secrets configured: if public_key was not set
-            // then we would implicitly disable auth.
-            anyhow::bail!(
-                    "Insecure config!  One or more secrets is not set.  This is only permitted in `--dev` mode"
-                );
-        }
-        StrictMode::Strict if args.compute_hook_url.is_none() => {
-            // Production systems should always have a compute hook set, to prevent falling
-            // back to trying to use neon_local.
-            anyhow::bail!(
-                "`--compute-hook-url` is not set: this is only permitted in `--dev` mode"
-            );
-        }
-        StrictMode::Strict => {
-            tracing::info!("Starting in strict mode: configuration is OK.")
-        }
-        StrictMode::Dev => {
-            tracing::warn!("Starting in dev mode: this may be an insecure configuration.")
-        }
-    }
-
-    let config = Config {
-        jwt_token: secrets.jwt_token,
-        control_plane_jwt_token: secrets.control_plane_jwt_token,
-        compute_hook_url: args.compute_hook_url,
-        max_unavailable_interval: args
-            .max_unavailable_interval
-            .map(humantime::Duration::into)
-            .unwrap_or(MAX_UNAVAILABLE_INTERVAL_DEFAULT),
-    };
-
-    // After loading secrets & config, but before starting anything else, apply database migrations
-    migration_run(&secrets.database_url)
-        .await
-        .context("Running database migrations")?;
-
-    let json_path = args.path;
-    let persistence = Arc::new(Persistence::new(secrets.database_url, json_path.clone()));
-
-    let service = Service::spawn(config, persistence.clone()).await?;
-
-    let http_listener = tcp_listener::bind(args.listen)?;
-
-    let auth = secrets
-        .public_key
-        .map(|jwt_auth| Arc::new(SwappableJwtAuth::new(jwt_auth)));
-    let router = make_router(service.clone(), auth)
-        .build()
-        .map_err(|err| anyhow!(err))?;
-    let router_service = utils::http::RouterService::new(router).unwrap();
-
-    // Start HTTP server
-    let server_shutdown = CancellationToken::new();
-    let server = hyper::Server::from_tcp(http_listener)?
-        .serve(router_service)
-        .with_graceful_shutdown({
-            let server_shutdown = server_shutdown.clone();
-            async move {
-                server_shutdown.cancelled().await;
-            }
-        });
-    tracing::info!("Serving on {0}", args.listen);
-    let server_task = tokio::task::spawn(server);
-
-    // Wait until we receive a signal
-    let mut sigint = tokio::signal::unix::signal(SignalKind::interrupt())?;
-    let mut sigquit = tokio::signal::unix::signal(SignalKind::quit())?;
-    let mut sigterm = tokio::signal::unix::signal(SignalKind::terminate())?;
-    tokio::select! {
-        _ = sigint.recv() => {},
-        _ = sigterm.recv() => {},
-        _ = sigquit.recv() => {},
-    }
-    tracing::info!("Terminating on signal");
-
-    if json_path.is_some() {
-        // Write out a JSON dump on shutdown: this is used in compat tests to avoid passing
-        // full postgres dumps around.
-        if let Err(e) = persistence.write_tenants_json().await {
-            tracing::error!("Failed to write JSON on shutdown: {e}")
-        }
-    }
-
-    // Stop HTTP server first, so that we don't have to service requests
-    // while shutting down Service
-    server_shutdown.cancel();
-    if let Err(e) = server_task.await {
-        tracing::error!("Error joining HTTP server task: {e}")
-    }
-    tracing::info!("Joined HTTP server task");
-
-    service.shutdown().await;
-    tracing::info!("Service shutdown complete");
-
-    std::process::exit(0);
-}

control_plane/attachment_service/src/metrics.rs

@@ -1,288 +0,0 @@
-//!
-//! This module provides metric definitions for the storage controller.
-//!
-//! All metrics are grouped in [`StorageControllerMetricGroup`]. [`StorageControllerMetrics`] holds
-//! the mentioned metrics and their encoder. It's globally available via the [`METRICS_REGISTRY`]
-//! constant.
-//!
-//! The rest of the code defines label group types and deals with converting outer types to labels.
-//!
-use bytes::Bytes;
-use measured::{
-    label::{LabelValue, StaticLabelSet},
-    FixedCardinalityLabel, MetricGroup,
-};
-use once_cell::sync::Lazy;
-use std::sync::Mutex;
-
-use crate::persistence::{DatabaseError, DatabaseOperation};
-
-pub(crate) static METRICS_REGISTRY: Lazy<StorageControllerMetrics> =
-    Lazy::new(StorageControllerMetrics::default);
-
-pub fn preinitialize_metrics() {
-    Lazy::force(&METRICS_REGISTRY);
-}
-
-pub(crate) struct StorageControllerMetrics {
-    pub(crate) metrics_group: StorageControllerMetricGroup,
-    encoder: Mutex<measured::text::TextEncoder>,
-}
-
-#[derive(measured::MetricGroup)]
-pub(crate) struct StorageControllerMetricGroup {
-    /// Count of how many times we spawn a reconcile task
-    pub(crate) storage_controller_reconcile_spawn: measured::Counter,
-    /// Reconciler tasks completed, broken down by success/failure/cancelled
-    pub(crate) storage_controller_reconcile_complete:
-        measured::CounterVec<ReconcileCompleteLabelGroupSet>,
-
-    /// Count of how many times we make an optimization change to a tenant's scheduling
-    pub(crate) storage_controller_schedule_optimization: measured::Counter,
-
-    /// HTTP request status counters for handled requests
-    pub(crate) storage_controller_http_request_status:
-        measured::CounterVec<HttpRequestStatusLabelGroupSet>,
-    /// HTTP request handler latency across all status codes
-    pub(crate) storage_controller_http_request_latency:
-        measured::HistogramVec<HttpRequestLatencyLabelGroupSet, 5>,
-
-    /// Count of HTTP requests to the pageserver that resulted in an error,
-    /// broken down by the pageserver node id, request name and method
-    pub(crate) storage_controller_pageserver_request_error:
-        measured::CounterVec<PageserverRequestLabelGroupSet>,
-
-    /// Latency of HTTP requests to the pageserver, broken down by pageserver
-    /// node id, request name and method. This include both successful and unsuccessful
-    /// requests.
-    pub(crate) storage_controller_pageserver_request_latency:
-        measured::HistogramVec<PageserverRequestLabelGroupSet, 5>,
-
-    /// Count of pass-through HTTP requests to the pageserver that resulted in an error,
-    /// broken down by the pageserver node id, request name and method
-    pub(crate) storage_controller_passthrough_request_error:
-        measured::CounterVec<PageserverRequestLabelGroupSet>,
-
-    /// Latency of pass-through HTTP requests to the pageserver, broken down by pageserver
-    /// node id, request name and method. This include both successful and unsuccessful
-    /// requests.
-    pub(crate) storage_controller_passthrough_request_latency:
-        measured::HistogramVec<PageserverRequestLabelGroupSet, 5>,
-
-    /// Count of errors in database queries, broken down by error type and operation.
-    pub(crate) storage_controller_database_query_error:
-        measured::CounterVec<DatabaseQueryErrorLabelGroupSet>,
-
-    /// Latency of database queries, broken down by operation.
-    pub(crate) storage_controller_database_query_latency:
-        measured::HistogramVec<DatabaseQueryLatencyLabelGroupSet, 5>,
-}
-
-impl StorageControllerMetrics {
-    pub(crate) fn encode(&self) -> Bytes {
-        let mut encoder = self.encoder.lock().unwrap();
-        self.metrics_group.collect_into(&mut *encoder);
-        encoder.finish()
-    }
-}
-
-impl Default for StorageControllerMetrics {
-    fn default() -> Self {
-        Self {
-            metrics_group: StorageControllerMetricGroup::new(),
-            encoder: Mutex::new(measured::text::TextEncoder::new()),
-        }
-    }
-}
-
-impl StorageControllerMetricGroup {
-    pub(crate) fn new() -> Self {
-        Self {
-            storage_controller_reconcile_spawn: measured::Counter::new(),
-            storage_controller_reconcile_complete: measured::CounterVec::new(
-                ReconcileCompleteLabelGroupSet {
-                    status: StaticLabelSet::new(),
-                },
-            ),
-            storage_controller_schedule_optimization: measured::Counter::new(),
-            storage_controller_http_request_status: measured::CounterVec::new(
-                HttpRequestStatusLabelGroupSet {
-                    path: lasso::ThreadedRodeo::new(),
-                    method: StaticLabelSet::new(),
-                    status: StaticLabelSet::new(),
-                },
-            ),
-            storage_controller_http_request_latency: measured::HistogramVec::new(
-                measured::metric::histogram::Thresholds::exponential_buckets(0.1, 2.0),
-            ),
-            storage_controller_pageserver_request_error: measured::CounterVec::new(
-                PageserverRequestLabelGroupSet {
-                    pageserver_id: lasso::ThreadedRodeo::new(),
-                    path: lasso::ThreadedRodeo::new(),
-                    method: StaticLabelSet::new(),
-                },
-            ),
-            storage_controller_pageserver_request_latency: measured::HistogramVec::new(
-                measured::metric::histogram::Thresholds::exponential_buckets(0.1, 2.0),
-            ),
-            storage_controller_passthrough_request_error: measured::CounterVec::new(
-                PageserverRequestLabelGroupSet {
-                    pageserver_id: lasso::ThreadedRodeo::new(),
-                    path: lasso::ThreadedRodeo::new(),
-                    method: StaticLabelSet::new(),
-                },
-            ),
-            storage_controller_passthrough_request_latency: measured::HistogramVec::new(
-                measured::metric::histogram::Thresholds::exponential_buckets(0.1, 2.0),
-            ),
-            storage_controller_database_query_error: measured::CounterVec::new(
-                DatabaseQueryErrorLabelGroupSet {
-                    operation: StaticLabelSet::new(),
-                    error_type: StaticLabelSet::new(),
-                },
-            ),
-            storage_controller_database_query_latency: measured::HistogramVec::new(
-                measured::metric::histogram::Thresholds::exponential_buckets(0.1, 2.0),
-            ),
-        }
-    }
-}
-
-#[derive(measured::LabelGroup)]
-#[label(set = ReconcileCompleteLabelGroupSet)]
-pub(crate) struct ReconcileCompleteLabelGroup {
-    pub(crate) status: ReconcileOutcome,
-}
-
-#[derive(measured::LabelGroup)]
-#[label(set = HttpRequestStatusLabelGroupSet)]
-pub(crate) struct HttpRequestStatusLabelGroup<'a> {
-    #[label(dynamic_with = lasso::ThreadedRodeo)]
-    pub(crate) path: &'a str,
-    pub(crate) method: Method,
-    pub(crate) status: StatusCode,
-}
-
-#[derive(measured::LabelGroup)]
-#[label(set = HttpRequestLatencyLabelGroupSet)]
-pub(crate) struct HttpRequestLatencyLabelGroup<'a> {
-    #[label(dynamic_with = lasso::ThreadedRodeo)]
-    pub(crate) path: &'a str,
-    pub(crate) method: Method,
-}
-
-impl Default for HttpRequestLatencyLabelGroupSet {
-    fn default() -> Self {
-        Self {
-            path: lasso::ThreadedRodeo::new(),
-            method: StaticLabelSet::new(),
-        }
-    }
-}
-
-#[derive(measured::LabelGroup, Clone)]
-#[label(set = PageserverRequestLabelGroupSet)]
-pub(crate) struct PageserverRequestLabelGroup<'a> {
-    #[label(dynamic_with = lasso::ThreadedRodeo)]
-    pub(crate) pageserver_id: &'a str,
-    #[label(dynamic_with = lasso::ThreadedRodeo)]
-    pub(crate) path: &'a str,
-    pub(crate) method: Method,
-}
-
-impl Default for PageserverRequestLabelGroupSet {
-    fn default() -> Self {
-        Self {
-            pageserver_id: lasso::ThreadedRodeo::new(),
-            path: lasso::ThreadedRodeo::new(),
-            method: StaticLabelSet::new(),
-        }
-    }
-}
-
-#[derive(measured::LabelGroup)]
-#[label(set = DatabaseQueryErrorLabelGroupSet)]
-pub(crate) struct DatabaseQueryErrorLabelGroup {
-    pub(crate) error_type: DatabaseErrorLabel,
-    pub(crate) operation: DatabaseOperation,
-}
-
-#[derive(measured::LabelGroup)]
-#[label(set = DatabaseQueryLatencyLabelGroupSet)]
-pub(crate) struct DatabaseQueryLatencyLabelGroup {
-    pub(crate) operation: DatabaseOperation,
-}
-
-#[derive(FixedCardinalityLabel)]
-pub(crate) enum ReconcileOutcome {
-    #[label(rename = "ok")]
-    Success,
-    Error,
-    Cancel,
-}
-
-#[derive(FixedCardinalityLabel, Clone)]
-pub(crate) enum Method {
-    Get,
-    Put,
-    Post,
-    Delete,
-    Other,
-}
-
-impl From<hyper::Method> for Method {
-    fn from(value: hyper::Method) -> Self {
-        if value == hyper::Method::GET {
-            Method::Get
-        } else if value == hyper::Method::PUT {
-            Method::Put
-        } else if value == hyper::Method::POST {
-            Method::Post
-        } else if value == hyper::Method::DELETE {
-            Method::Delete
-        } else {
-            Method::Other
-        }
-    }
-}
-
-pub(crate) struct StatusCode(pub(crate) hyper::http::StatusCode);
-
-impl LabelValue for StatusCode {
-    fn visit<V: measured::label::LabelVisitor>(&self, v: V) -> V::Output {
-        v.write_int(self.0.as_u16() as u64)
-    }
-}
-
-impl FixedCardinalityLabel for StatusCode {
-    fn cardinality() -> usize {
-        (100..1000).len()
-    }
-
-    fn encode(&self) -> usize {
-        self.0.as_u16() as usize
-    }
-
-    fn decode(value: usize) -> Self {
-        Self(hyper::http::StatusCode::from_u16(u16::try_from(value).unwrap()).unwrap())
-    }
-}
-
-#[derive(FixedCardinalityLabel)]
-pub(crate) enum DatabaseErrorLabel {
-    Query,
-    Connection,
-    ConnectionPool,
-    Logical,
-}
-
-impl DatabaseError {
-    pub(crate) fn error_label(&self) -> DatabaseErrorLabel {
-        match self {
-            Self::Query(_) => DatabaseErrorLabel::Query,
-            Self::Connection(_) => DatabaseErrorLabel::Connection,
-            Self::ConnectionPool(_) => DatabaseErrorLabel::ConnectionPool,
-            Self::Logical(_) => DatabaseErrorLabel::Logical,
-        }
-    }
-}

control_plane/attachment_service/src/node.rs

@@ -1,271 +0,0 @@
-use std::{str::FromStr, time::Duration};
-
-use hyper::StatusCode;
-use pageserver_api::{
-    controller_api::{
-        NodeAvailability, NodeRegisterRequest, NodeSchedulingPolicy, TenantLocateResponseShard,
-    },
-    shard::TenantShardId,
-};
-use pageserver_client::mgmt_api;
-use serde::Serialize;
-use tokio_util::sync::CancellationToken;
-use utils::{backoff, id::NodeId};
-
-use crate::{
-    pageserver_client::PageserverClient, persistence::NodePersistence, scheduler::MaySchedule,
-};
-
-/// Represents the in-memory description of a Node.
-///
-/// Scheduling statistics are maintened separately in [`crate::scheduler`].
-///
-/// The persistent subset of the Node is defined in [`crate::persistence::NodePersistence`]: the
-/// implementation of serialization on this type is only for debug dumps.
-#[derive(Clone, Serialize)]
-pub(crate) struct Node {
-    id: NodeId,
-
-    availability: NodeAvailability,
-    scheduling: NodeSchedulingPolicy,
-
-    listen_http_addr: String,
-    listen_http_port: u16,
-
-    listen_pg_addr: String,
-    listen_pg_port: u16,
-
-    // This cancellation token means "stop any RPCs in flight to this node, and don't start
-    // any more". It is not related to process shutdown.
-    #[serde(skip)]
-    cancel: CancellationToken,
-}
-
-/// When updating [`Node::availability`] we use this type to indicate to the caller
-/// whether/how they changed it.
-pub(crate) enum AvailabilityTransition {
-    ToActive,
-    ToOffline,
-    Unchanged,
-}
-
-impl Node {
-    pub(crate) fn base_url(&self) -> String {
-        format!("http://{}:{}", self.listen_http_addr, self.listen_http_port)
-    }
-
-    pub(crate) fn get_id(&self) -> NodeId {
-        self.id
-    }
-
-    pub(crate) fn set_scheduling(&mut self, scheduling: NodeSchedulingPolicy) {
-        self.scheduling = scheduling
-    }
-
-    /// Does this registration request match `self`?  This is used when deciding whether a registration
-    /// request should be allowed to update an existing record with the same node ID.
-    pub(crate) fn registration_match(&self, register_req: &NodeRegisterRequest) -> bool {
-        self.id == register_req.node_id
-            && self.listen_http_addr == register_req.listen_http_addr
-            && self.listen_http_port == register_req.listen_http_port
-            && self.listen_pg_addr == register_req.listen_pg_addr
-            && self.listen_pg_port == register_req.listen_pg_port
-    }
-
-    /// For a shard located on this node, populate a response object
-    /// with this node's address information.
-    pub(crate) fn shard_location(&self, shard_id: TenantShardId) -> TenantLocateResponseShard {
-        TenantLocateResponseShard {
-            shard_id,
-            node_id: self.id,
-            listen_http_addr: self.listen_http_addr.clone(),
-            listen_http_port: self.listen_http_port,
-            listen_pg_addr: self.listen_pg_addr.clone(),
-            listen_pg_port: self.listen_pg_port,
-        }
-    }
-
-    pub(crate) fn set_availability(&mut self, availability: NodeAvailability) {
-        match self.get_availability_transition(availability) {
-            AvailabilityTransition::ToActive => {
-                // Give the node a new cancellation token, effectively resetting it to un-cancelled.  Any
-                // users of previously-cloned copies of the node will still see the old cancellation
-                // state.  For example, Reconcilers in flight will have to complete and be spawned
-                // again to realize that the node has become available.
-                self.cancel = CancellationToken::new();
-            }
-            AvailabilityTransition::ToOffline => {
-                // Fire the node's cancellation token to cancel any in-flight API requests to it
-                self.cancel.cancel();
-            }
-            AvailabilityTransition::Unchanged => {}
-        }
-        self.availability = availability;
-    }
-
-    /// Without modifying the availability of the node, convert the intended availability
-    /// into a description of the transition.
-    pub(crate) fn get_availability_transition(
-        &self,
-        availability: NodeAvailability,
-    ) -> AvailabilityTransition {
-        use AvailabilityTransition::*;
-        use NodeAvailability::*;
-
-        match (self.availability, availability) {
-            (Offline, Active(_)) => ToActive,
-            (Active(_), Offline) => ToOffline,
-            _ => Unchanged,
-        }
-    }
-
-    /// Whether we may send API requests to this node.
-    pub(crate) fn is_available(&self) -> bool {
-        // When we clone a node, [`Self::availability`] is a snapshot, but [`Self::cancel`] holds
-        // a reference to the original Node's cancellation status.  Checking both of these results
-        // in a "pessimistic" check where we will consider a Node instance unavailable if it was unavailable
-        // when we cloned it, or if the original Node instance's cancellation token was fired.
-        matches!(self.availability, NodeAvailability::Active(_)) && !self.cancel.is_cancelled()
-    }
-
-    /// Is this node elegible to have work scheduled onto it?
-    pub(crate) fn may_schedule(&self) -> MaySchedule {
-        let score = match self.availability {
-            NodeAvailability::Active(score) => score,
-            NodeAvailability::Offline => return MaySchedule::No,
-        };
-
-        match self.scheduling {
-            NodeSchedulingPolicy::Active => MaySchedule::Yes(score),
-            NodeSchedulingPolicy::Draining => MaySchedule::No,
-            NodeSchedulingPolicy::Filling => MaySchedule::Yes(score),
-            NodeSchedulingPolicy::Pause => MaySchedule::No,
-        }
-    }
-
-    pub(crate) fn new(
-        id: NodeId,
-        listen_http_addr: String,
-        listen_http_port: u16,
-        listen_pg_addr: String,
-        listen_pg_port: u16,
-    ) -> Self {
-        Self {
-            id,
-            listen_http_addr,
-            listen_http_port,
-            listen_pg_addr,
-            listen_pg_port,
-            scheduling: NodeSchedulingPolicy::Filling,
-            availability: NodeAvailability::Offline,
-            cancel: CancellationToken::new(),
-        }
-    }
-
-    pub(crate) fn to_persistent(&self) -> NodePersistence {
-        NodePersistence {
-            node_id: self.id.0 as i64,
-            scheduling_policy: self.scheduling.into(),
-            listen_http_addr: self.listen_http_addr.clone(),
-            listen_http_port: self.listen_http_port as i32,
-            listen_pg_addr: self.listen_pg_addr.clone(),
-            listen_pg_port: self.listen_pg_port as i32,
-        }
-    }
-
-    pub(crate) fn from_persistent(np: NodePersistence) -> Self {
-        Self {
-            id: NodeId(np.node_id as u64),
-            // At startup we consider a node offline until proven otherwise.
-            availability: NodeAvailability::Offline,
-            scheduling: NodeSchedulingPolicy::from_str(&np.scheduling_policy)
-                .expect("Bad scheduling policy in DB"),
-            listen_http_addr: np.listen_http_addr,
-            listen_http_port: np.listen_http_port as u16,
-            listen_pg_addr: np.listen_pg_addr,
-            listen_pg_port: np.listen_pg_port as u16,
-            cancel: CancellationToken::new(),
-        }
-    }
-
-    /// Wrapper for issuing requests to pageserver management API: takes care of generic
-    /// retry/backoff for retryable HTTP status codes.
-    ///
-    /// This will return None to indicate cancellation.  Cancellation may happen from
-    /// the cancellation token passed in, or from Self's cancellation token (i.e. node
-    /// going offline).
-    pub(crate) async fn with_client_retries<T, O, F>(
-        &self,
-        mut op: O,
-        jwt: &Option<String>,
-        warn_threshold: u32,
-        max_retries: u32,
-        timeout: Duration,
-        cancel: &CancellationToken,
-    ) -> Option<mgmt_api::Result<T>>
-    where
-        O: FnMut(PageserverClient) -> F,
-        F: std::future::Future<Output = mgmt_api::Result<T>>,
-    {
-        fn is_fatal(e: &mgmt_api::Error) -> bool {
-            use mgmt_api::Error::*;
-            match e {
-                ReceiveBody(_) | ReceiveErrorBody(_) => false,
-                ApiError(StatusCode::SERVICE_UNAVAILABLE, _)
-                | ApiError(StatusCode::GATEWAY_TIMEOUT, _)
-                | ApiError(StatusCode::REQUEST_TIMEOUT, _) => false,
-                ApiError(_, _) => true,
-                Cancelled => true,
-            }
-        }
-
-        backoff::retry(
-            || {
-                let http_client = reqwest::ClientBuilder::new()
-                    .timeout(timeout)
-                    .build()
-                    .expect("Failed to construct HTTP client");
-
-                let client = PageserverClient::from_client(
-                    self.get_id(),
-                    http_client,
-                    self.base_url(),
-                    jwt.as_deref(),
-                );
-
-                let node_cancel_fut = self.cancel.cancelled();
-
-                let op_fut = op(client);
-
-                async {
-                    tokio::select! {
-                        r = op_fut=> {r},
-                        _ = node_cancel_fut => {
-                        Err(mgmt_api::Error::Cancelled)
-                    }}
-                }
-            },
-            is_fatal,
-            warn_threshold,
-            max_retries,
-            &format!(
-                "Call to node {} ({}:{}) management API",
-                self.id, self.listen_http_addr, self.listen_http_port
-            ),
-            cancel,
-        )
-        .await
-    }
-}
-
-impl std::fmt::Display for Node {
-    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
-        write!(f, "{} ({})", self.id, self.listen_http_addr)
-    }
-}
-
-impl std::fmt::Debug for Node {
-    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
-        write!(f, "{} ({})", self.id, self.listen_http_addr)
-    }
-}

control_plane/attachment_service/src/pageserver_client.rs

@@ -1,203 +0,0 @@
-use pageserver_api::{
-    models::{
-        LocationConfig, LocationConfigListResponse, PageserverUtilization, SecondaryProgress,
-        TenantShardSplitRequest, TenantShardSplitResponse, TimelineCreateRequest, TimelineInfo,
-    },
-    shard::TenantShardId,
-};
-use pageserver_client::mgmt_api::{Client, Result};
-use reqwest::StatusCode;
-use utils::id::{NodeId, TimelineId};
-
-/// Thin wrapper around [`pageserver_client::mgmt_api::Client`]. It allows the storage
-/// controller to collect metrics in a non-intrusive manner.
-#[derive(Debug, Clone)]
-pub(crate) struct PageserverClient {
-    inner: Client,
-    node_id_label: String,
-}
-
-macro_rules! measured_request {
-    ($name:literal, $method:expr, $node_id: expr, $invoke:expr) => {{
-        let labels = crate::metrics::PageserverRequestLabelGroup {
-            pageserver_id: $node_id,
-            path: $name,
-            method: $method,
-        };
-
-        let latency = &crate::metrics::METRICS_REGISTRY
-            .metrics_group
-            .storage_controller_pageserver_request_latency;
-        let _timer_guard = latency.start_timer(labels.clone());
-
-        let res = $invoke;
-
-        if res.is_err() {
-            let error_counters = &crate::metrics::METRICS_REGISTRY
-                .metrics_group
-                .storage_controller_pageserver_request_error;
-            error_counters.inc(labels)
-        }
-
-        res
-    }};
-}
-
-impl PageserverClient {
-    pub(crate) fn new(node_id: NodeId, mgmt_api_endpoint: String, jwt: Option<&str>) -> Self {
-        Self {
-            inner: Client::from_client(reqwest::Client::new(), mgmt_api_endpoint, jwt),
-            node_id_label: node_id.0.to_string(),
-        }
-    }
-
-    pub(crate) fn from_client(
-        node_id: NodeId,
-        raw_client: reqwest::Client,
-        mgmt_api_endpoint: String,
-        jwt: Option<&str>,
-    ) -> Self {
-        Self {
-            inner: Client::from_client(raw_client, mgmt_api_endpoint, jwt),
-            node_id_label: node_id.0.to_string(),
-        }
-    }
-
-    pub(crate) async fn tenant_delete(&self, tenant_shard_id: TenantShardId) -> Result<StatusCode> {
-        measured_request!(
-            "tenant",
-            crate::metrics::Method::Delete,
-            &self.node_id_label,
-            self.inner.tenant_delete(tenant_shard_id).await
-        )
-    }
-
-    pub(crate) async fn tenant_time_travel_remote_storage(
-        &self,
-        tenant_shard_id: TenantShardId,
-        timestamp: &str,
-        done_if_after: &str,
-    ) -> Result<()> {
-        measured_request!(
-            "tenant_time_travel_remote_storage",
-            crate::metrics::Method::Put,
-            &self.node_id_label,
-            self.inner
-                .tenant_time_travel_remote_storage(tenant_shard_id, timestamp, done_if_after)
-                .await
-        )
-    }
-
-    pub(crate) async fn tenant_secondary_download(
-        &self,
-        tenant_id: TenantShardId,
-        wait: Option<std::time::Duration>,
-    ) -> Result<(StatusCode, SecondaryProgress)> {
-        measured_request!(
-            "tenant_secondary_download",
-            crate::metrics::Method::Post,
-            &self.node_id_label,
-            self.inner.tenant_secondary_download(tenant_id, wait).await
-        )
-    }
-
-    pub(crate) async fn location_config(
-        &self,
-        tenant_shard_id: TenantShardId,
-        config: LocationConfig,
-        flush_ms: Option<std::time::Duration>,
-        lazy: bool,
-    ) -> Result<()> {
-        measured_request!(
-            "location_config",
-            crate::metrics::Method::Put,
-            &self.node_id_label,
-            self.inner
-                .location_config(tenant_shard_id, config, flush_ms, lazy)
-                .await
-        )
-    }
-
-    pub(crate) async fn list_location_config(&self) -> Result<LocationConfigListResponse> {
-        measured_request!(
-            "location_configs",
-            crate::metrics::Method::Get,
-            &self.node_id_label,
-            self.inner.list_location_config().await
-        )
-    }
-
-    pub(crate) async fn get_location_config(
-        &self,
-        tenant_shard_id: TenantShardId,
-    ) -> Result<Option<LocationConfig>> {
-        measured_request!(
-            "location_config",
-            crate::metrics::Method::Get,
-            &self.node_id_label,
-            self.inner.get_location_config(tenant_shard_id).await
-        )
-    }
-
-    pub(crate) async fn timeline_create(
-        &self,
-        tenant_shard_id: TenantShardId,
-        req: &TimelineCreateRequest,
-    ) -> Result<TimelineInfo> {
-        measured_request!(
-            "timeline",
-            crate::metrics::Method::Post,
-            &self.node_id_label,
-            self.inner.timeline_create(tenant_shard_id, req).await
-        )
-    }
-
-    pub(crate) async fn timeline_delete(
-        &self,
-        tenant_shard_id: TenantShardId,
-        timeline_id: TimelineId,
-    ) -> Result<StatusCode> {
-        measured_request!(
-            "timeline",
-            crate::metrics::Method::Delete,
-            &self.node_id_label,
-            self.inner
-                .timeline_delete(tenant_shard_id, timeline_id)
-                .await
-        )
-    }
-
-    pub(crate) async fn tenant_shard_split(
-        &self,
-        tenant_shard_id: TenantShardId,
-        req: TenantShardSplitRequest,
-    ) -> Result<TenantShardSplitResponse> {
-        measured_request!(
-            "tenant_shard_split",
-            crate::metrics::Method::Put,
-            &self.node_id_label,
-            self.inner.tenant_shard_split(tenant_shard_id, req).await
-        )
-    }
-
-    pub(crate) async fn timeline_list(
-        &self,
-        tenant_shard_id: &TenantShardId,
-    ) -> Result<Vec<TimelineInfo>> {
-        measured_request!(
-            "timelines",
-            crate::metrics::Method::Get,
-            &self.node_id_label,
-            self.inner.timeline_list(tenant_shard_id).await
-        )
-    }
-
-    pub(crate) async fn get_utilization(&self) -> Result<PageserverUtilization> {
-        measured_request!(
-            "utilization",
-            crate::metrics::Method::Get,
-            &self.node_id_label,
-            self.inner.get_utilization().await
-        )
-    }
-}

control_plane/attachment_service/src/persistence.rs

@@ -1,765 +0,0 @@
-pub(crate) mod split_state;
-use std::collections::HashMap;
-use std::str::FromStr;
-use std::time::Duration;
-
-use self::split_state::SplitState;
-use camino::Utf8Path;
-use camino::Utf8PathBuf;
-use diesel::pg::PgConnection;
-use diesel::prelude::*;
-use diesel::Connection;
-use pageserver_api::controller_api::ShardSchedulingPolicy;
-use pageserver_api::controller_api::{NodeSchedulingPolicy, PlacementPolicy};
-use pageserver_api::models::TenantConfig;
-use pageserver_api::shard::ShardConfigError;
-use pageserver_api::shard::ShardIdentity;
-use pageserver_api::shard::ShardStripeSize;
-use pageserver_api::shard::{ShardCount, ShardNumber, TenantShardId};
-use serde::{Deserialize, Serialize};
-use utils::generation::Generation;
-use utils::id::{NodeId, TenantId};
-
-use crate::metrics::{
-    DatabaseQueryErrorLabelGroup, DatabaseQueryLatencyLabelGroup, METRICS_REGISTRY,
-};
-use crate::node::Node;
-
-/// ## What do we store?
-///
-/// The storage controller service does not store most of its state durably.
-///
-/// The essential things to store durably are:
-/// - generation numbers, as these must always advance monotonically to ensure data safety.
-/// - Tenant's PlacementPolicy and TenantConfig, as the source of truth for these is something external.
-/// - Node's scheduling policies, as the source of truth for these is something external.
-///
-/// Other things we store durably as an implementation detail:
-/// - Node's host/port: this could be avoided it we made nodes emit a self-registering heartbeat,
-///   but it is operationally simpler to make this service the authority for which nodes
-///   it talks to.
-///
-/// ## Performance/efficiency
-///
-/// The storage controller service does not go via the database for most things: there are
-/// a couple of places where we must, and where efficiency matters:
-/// - Incrementing generation numbers: the Reconciler has to wait for this to complete
-///   before it can attach a tenant, so this acts as a bound on how fast things like
-///   failover can happen.
-/// - Pageserver re-attach: we will increment many shards' generations when this happens,
-///   so it is important to avoid e.g. issuing O(N) queries.
-///
-/// Database calls relating to nodes have low performance requirements, as they are very rarely
-/// updated, and reads of nodes are always from memory, not the database.  We only require that
-/// we can UPDATE a node's scheduling mode reasonably quickly to mark a bad node offline.
-pub struct Persistence {
-    connection_pool: diesel::r2d2::Pool<diesel::r2d2::ConnectionManager<PgConnection>>,
-
-    // In test environments, we support loading+saving a JSON file.  This is temporary, for the benefit of
-    // test_compatibility.py, so that we don't have to commit to making the database contents fully backward/forward
-    // compatible just yet.
-    json_path: Option<Utf8PathBuf>,
-}
-
-/// Legacy format, for use in JSON compat objects in test environment
-#[derive(Serialize, Deserialize)]
-struct JsonPersistence {
-    tenants: HashMap<TenantShardId, TenantShardPersistence>,
-}
-
-#[derive(thiserror::Error, Debug)]
-pub(crate) enum DatabaseError {
-    #[error(transparent)]
-    Query(#[from] diesel::result::Error),
-    #[error(transparent)]
-    Connection(#[from] diesel::result::ConnectionError),
-    #[error(transparent)]
-    ConnectionPool(#[from] r2d2::Error),
-    #[error("Logical error: {0}")]
-    Logical(String),
-}
-
-#[derive(measured::FixedCardinalityLabel, Clone)]
-pub(crate) enum DatabaseOperation {
-    InsertNode,
-    UpdateNode,
-    DeleteNode,
-    ListNodes,
-    BeginShardSplit,
-    CompleteShardSplit,
-    AbortShardSplit,
-    Detach,
-    ReAttach,
-    IncrementGeneration,
-    ListTenantShards,
-    InsertTenantShards,
-    UpdateTenantShard,
-    DeleteTenant,
-    UpdateTenantConfig,
-}
-
-#[must_use]
-pub(crate) enum AbortShardSplitStatus {
-    /// We aborted the split in the database by reverting to the parent shards
-    Aborted,
-    /// The split had already been persisted.
-    Complete,
-}
-
-pub(crate) type DatabaseResult<T> = Result<T, DatabaseError>;
-
-/// Some methods can operate on either a whole tenant or a single shard
-pub(crate) enum TenantFilter {
-    Tenant(TenantId),
-    Shard(TenantShardId),
-}
-
-impl Persistence {
-    // The default postgres connection limit is 100.  We use up to 99, to leave one free for a human admin under
-    // normal circumstances.  This assumes we have exclusive use of the database cluster to which we connect.
-    pub const MAX_CONNECTIONS: u32 = 99;
-
-    // We don't want to keep a lot of connections alive: close them down promptly if they aren't being used.
-    const IDLE_CONNECTION_TIMEOUT: Duration = Duration::from_secs(10);
-    const MAX_CONNECTION_LIFETIME: Duration = Duration::from_secs(60);
-
-    pub fn new(database_url: String, json_path: Option<Utf8PathBuf>) -> Self {
-        let manager = diesel::r2d2::ConnectionManager::<PgConnection>::new(database_url);
-
-        // We will use a connection pool: this is primarily to _limit_ our connection count, rather than to optimize time
-        // to execute queries (database queries are not generally on latency-sensitive paths).
-        let connection_pool = diesel::r2d2::Pool::builder()
-            .max_size(Self::MAX_CONNECTIONS)
-            .max_lifetime(Some(Self::MAX_CONNECTION_LIFETIME))
-            .idle_timeout(Some(Self::IDLE_CONNECTION_TIMEOUT))
-            // Always keep at least one connection ready to go
-            .min_idle(Some(1))
-            .test_on_check_out(true)
-            .build(manager)
-            .expect("Could not build connection pool");
-
-        Self {
-            connection_pool,
-            json_path,
-        }
-    }
-
-    /// Wraps `with_conn` in order to collect latency and error metrics
-    async fn with_measured_conn<F, R>(&self, op: DatabaseOperation, func: F) -> DatabaseResult<R>
-    where
-        F: FnOnce(&mut PgConnection) -> DatabaseResult<R> + Send + 'static,
-        R: Send + 'static,
-    {
-        let latency = &METRICS_REGISTRY
-            .metrics_group
-            .storage_controller_database_query_latency;
-        let _timer = latency.start_timer(DatabaseQueryLatencyLabelGroup {
-            operation: op.clone(),
-        });
-
-        let res = self.with_conn(func).await;
-
-        if let Err(err) = &res {
-            let error_counter = &METRICS_REGISTRY
-                .metrics_group
-                .storage_controller_database_query_error;
-            error_counter.inc(DatabaseQueryErrorLabelGroup {
-                error_type: err.error_label(),
-                operation: op,
-            })
-        }
-
-        res
-    }
-
-    /// Call the provided function in a tokio blocking thread, with a Diesel database connection.
-    async fn with_conn<F, R>(&self, func: F) -> DatabaseResult<R>
-    where
-        F: FnOnce(&mut PgConnection) -> DatabaseResult<R> + Send + 'static,
-        R: Send + 'static,
-    {
-        let mut conn = self.connection_pool.get()?;
-        tokio::task::spawn_blocking(move || -> DatabaseResult<R> { func(&mut conn) })
-            .await
-            .expect("Task panic")
-    }
-
-    /// When a node is first registered, persist it before using it for anything
-    pub(crate) async fn insert_node(&self, node: &Node) -> DatabaseResult<()> {
-        let np = node.to_persistent();
-        self.with_measured_conn(
-            DatabaseOperation::InsertNode,
-            move |conn| -> DatabaseResult<()> {
-                diesel::insert_into(crate::schema::nodes::table)
-                    .values(&np)
-                    .execute(conn)?;
-                Ok(())
-            },
-        )
-        .await
-    }
-
-    /// At startup, populate the list of nodes which our shards may be placed on
-    pub(crate) async fn list_nodes(&self) -> DatabaseResult<Vec<NodePersistence>> {
-        let nodes: Vec<NodePersistence> = self
-            .with_measured_conn(
-                DatabaseOperation::ListNodes,
-                move |conn| -> DatabaseResult<_> {
-                    Ok(crate::schema::nodes::table.load::<NodePersistence>(conn)?)
-                },
-            )
-            .await?;
-
-        tracing::info!("list_nodes: loaded {} nodes", nodes.len());
-
-        Ok(nodes)
-    }
-
-    pub(crate) async fn update_node(
-        &self,
-        input_node_id: NodeId,
-        input_scheduling: NodeSchedulingPolicy,
-    ) -> DatabaseResult<()> {
-        use crate::schema::nodes::dsl::*;
-        let updated = self
-            .with_measured_conn(DatabaseOperation::UpdateNode, move |conn| {
-                let updated = diesel::update(nodes)
-                    .filter(node_id.eq(input_node_id.0 as i64))
-                    .set((scheduling_policy.eq(String::from(input_scheduling)),))
-                    .execute(conn)?;
-                Ok(updated)
-            })
-            .await?;
-
-        if updated != 1 {
-            Err(DatabaseError::Logical(format!(
-                "Node {node_id:?} not found for update",
-            )))
-        } else {
-            Ok(())
-        }
-    }
-
-    /// At startup, load the high level state for shards, such as their config + policy.  This will
-    /// be enriched at runtime with state discovered on pageservers.
-    pub(crate) async fn list_tenant_shards(&self) -> DatabaseResult<Vec<TenantShardPersistence>> {
-        let loaded = self
-            .with_measured_conn(
-                DatabaseOperation::ListTenantShards,
-                move |conn| -> DatabaseResult<_> {
-                    Ok(crate::schema::tenant_shards::table.load::<TenantShardPersistence>(conn)?)
-                },
-            )
-            .await?;
-
-        if loaded.is_empty() {
-            if let Some(path) = &self.json_path {
-                if tokio::fs::try_exists(path)
-                    .await
-                    .map_err(|e| DatabaseError::Logical(format!("Error stat'ing JSON file: {e}")))?
-                {
-                    tracing::info!("Importing from legacy JSON format at {path}");
-                    return self.list_tenant_shards_json(path).await;
-                }
-            }
-        }
-        Ok(loaded)
-    }
-
-    /// Shim for automated compatibility tests: load tenants from a JSON file instead of database
-    pub(crate) async fn list_tenant_shards_json(
-        &self,
-        path: &Utf8Path,
-    ) -> DatabaseResult<Vec<TenantShardPersistence>> {
-        let bytes = tokio::fs::read(path)
-            .await
-            .map_err(|e| DatabaseError::Logical(format!("Failed to load JSON: {e}")))?;
-
-        let mut decoded = serde_json::from_slice::<JsonPersistence>(&bytes)
-            .map_err(|e| DatabaseError::Logical(format!("Deserialization error: {e}")))?;
-        for shard in decoded.tenants.values_mut() {
-            if shard.placement_policy == "\"Single\"" {
-                // Backward compat for test data after PR https://github.com/neondatabase/neon/pull/7165
-                shard.placement_policy = "{\"Attached\":0}".to_string();
-            }
-
-            if shard.scheduling_policy.is_empty() {
-                shard.scheduling_policy =
-                    serde_json::to_string(&ShardSchedulingPolicy::default()).unwrap();
-            }
-        }
-
-        let tenants: Vec<TenantShardPersistence> = decoded.tenants.into_values().collect();
-
-        // Synchronize database with what is in the JSON file
-        self.insert_tenant_shards(tenants.clone()).await?;
-
-        Ok(tenants)
-    }
-
-    /// For use in testing environments, where we dump out JSON on shutdown.
-    pub async fn write_tenants_json(&self) -> anyhow::Result<()> {
-        let Some(path) = &self.json_path else {
-            anyhow::bail!("Cannot write JSON if path isn't set (test environment bug)");
-        };
-        tracing::info!("Writing state to {path}...");
-        let tenants = self.list_tenant_shards().await?;
-        let mut tenants_map = HashMap::new();
-        for tsp in tenants {
-            let tenant_shard_id = TenantShardId {
-                tenant_id: TenantId::from_str(tsp.tenant_id.as_str())?,
-                shard_number: ShardNumber(tsp.shard_number as u8),
-                shard_count: ShardCount::new(tsp.shard_count as u8),
-            };
-
-            tenants_map.insert(tenant_shard_id, tsp);
-        }
-        let json = serde_json::to_string(&JsonPersistence {
-            tenants: tenants_map,
-        })?;
-
-        tokio::fs::write(path, &json).await?;
-        tracing::info!("Wrote {} bytes to {path}...", json.len());
-
-        Ok(())
-    }
-
-    /// Tenants must be persisted before we schedule them for the first time.  This enables us
-    /// to correctly retain generation monotonicity, and the externally provided placement policy & config.
-    pub(crate) async fn insert_tenant_shards(
-        &self,
-        shards: Vec<TenantShardPersistence>,
-    ) -> DatabaseResult<()> {
-        use crate::schema::tenant_shards::dsl::*;
-        self.with_measured_conn(
-            DatabaseOperation::InsertTenantShards,
-            move |conn| -> DatabaseResult<()> {
-                conn.transaction(|conn| -> QueryResult<()> {
-                    for tenant in &shards {
-                        diesel::insert_into(tenant_shards)
-                            .values(tenant)
-                            .execute(conn)?;
-                    }
-                    Ok(())
-                })?;
-                Ok(())
-            },
-        )
-        .await
-    }
-
-    /// Ordering: call this _after_ deleting the tenant on pageservers, but _before_ dropping state for
-    /// the tenant from memory on this server.
-    pub(crate) async fn delete_tenant(&self, del_tenant_id: TenantId) -> DatabaseResult<()> {
-        use crate::schema::tenant_shards::dsl::*;
-        self.with_measured_conn(
-            DatabaseOperation::DeleteTenant,
-            move |conn| -> DatabaseResult<()> {
-                diesel::delete(tenant_shards)
-                    .filter(tenant_id.eq(del_tenant_id.to_string()))
-                    .execute(conn)?;
-
-                Ok(())
-            },
-        )
-        .await
-    }
-
-    pub(crate) async fn delete_node(&self, del_node_id: NodeId) -> DatabaseResult<()> {
-        use crate::schema::nodes::dsl::*;
-        self.with_measured_conn(
-            DatabaseOperation::DeleteNode,
-            move |conn| -> DatabaseResult<()> {
-                diesel::delete(nodes)
-                    .filter(node_id.eq(del_node_id.0 as i64))
-                    .execute(conn)?;
-
-                Ok(())
-            },
-        )
-        .await
-    }
-
-    /// When a tenant invokes the /re-attach API, this function is responsible for doing an efficient
-    /// batched increment of the generations of all tenants whose generation_pageserver is equal to
-    /// the node that called /re-attach.
-    #[tracing::instrument(skip_all, fields(node_id))]
-    pub(crate) async fn re_attach(
-        &self,
-        node_id: NodeId,
-    ) -> DatabaseResult<HashMap<TenantShardId, Generation>> {
-        use crate::schema::tenant_shards::dsl::*;
-        let updated = self
-            .with_measured_conn(DatabaseOperation::ReAttach, move |conn| {
-                let rows_updated = diesel::update(tenant_shards)
-                    .filter(generation_pageserver.eq(node_id.0 as i64))
-                    .set(generation.eq(generation + 1))
-                    .execute(conn)?;
-
-                tracing::info!("Incremented {} tenants' generations", rows_updated);
-
-                // TODO: UPDATE+SELECT in one query
-
-                let updated = tenant_shards
-                    .filter(generation_pageserver.eq(node_id.0 as i64))
-                    .select(TenantShardPersistence::as_select())
-                    .load(conn)?;
-                Ok(updated)
-            })
-            .await?;
-
-        let mut result = HashMap::new();
-        for tsp in updated {
-            let tenant_shard_id = TenantShardId {
-                tenant_id: TenantId::from_str(tsp.tenant_id.as_str())
-                    .map_err(|e| DatabaseError::Logical(format!("Malformed tenant id: {e}")))?,
-                shard_number: ShardNumber(tsp.shard_number as u8),
-                shard_count: ShardCount::new(tsp.shard_count as u8),
-            };
-
-            let Some(g) = tsp.generation else {
-                // If the generation_pageserver column was non-NULL, then the generation column should also be non-NULL:
-                // we only set generation_pageserver when setting generation.
-                return Err(DatabaseError::Logical(
-                    "Generation should always be set after incrementing".to_string(),
-                ));
-            };
-            result.insert(tenant_shard_id, Generation::new(g as u32));
-        }
-
-        Ok(result)
-    }
-
-    /// Reconciler calls this immediately before attaching to a new pageserver, to acquire a unique, monotonically
-    /// advancing generation number.  We also store the NodeId for which the generation was issued, so that in
-    /// [`Self::re_attach`] we can do a bulk UPDATE on the generations for that node.
-    pub(crate) async fn increment_generation(
-        &self,
-        tenant_shard_id: TenantShardId,
-        node_id: NodeId,
-    ) -> anyhow::Result<Generation> {
-        use crate::schema::tenant_shards::dsl::*;
-        let updated = self
-            .with_measured_conn(DatabaseOperation::IncrementGeneration, move |conn| {
-                let updated = diesel::update(tenant_shards)
-                    .filter(tenant_id.eq(tenant_shard_id.tenant_id.to_string()))
-                    .filter(shard_number.eq(tenant_shard_id.shard_number.0 as i32))
-                    .filter(shard_count.eq(tenant_shard_id.shard_count.literal() as i32))
-                    .set((
-                        generation.eq(generation + 1),
-                        generation_pageserver.eq(node_id.0 as i64),
-                    ))
-                    // TODO: only returning() the generation column
-                    .returning(TenantShardPersistence::as_returning())
-                    .get_result(conn)?;
-
-                Ok(updated)
-            })
-            .await?;
-
-        // Generation is always non-null in the rseult: if the generation column had been NULL, then we
-        // should have experienced an SQL Confilict error while executing a query that tries to increment it.
-        debug_assert!(updated.generation.is_some());
-        let Some(g) = updated.generation else {
-            return Err(DatabaseError::Logical(
-                "Generation should always be set after incrementing".to_string(),
-            )
-            .into());
-        };
-
-        Ok(Generation::new(g as u32))
-    }
-
-    /// For use when updating a persistent property of a tenant, such as its config or placement_policy.
-    ///
-    /// Do not use this for settting generation, unless in the special onboarding code path (/location_config)
-    /// API: use [`Self::increment_generation`] instead.  Setting the generation via this route is a one-time thing
-    /// that we only do the first time a tenant is set to an attached policy via /location_config.
-    pub(crate) async fn update_tenant_shard(
-        &self,
-        tenant: TenantFilter,
-        input_placement_policy: Option<PlacementPolicy>,
-        input_config: Option<TenantConfig>,
-        input_generation: Option<Generation>,
-        input_scheduling_policy: Option<ShardSchedulingPolicy>,
-    ) -> DatabaseResult<()> {
-        use crate::schema::tenant_shards::dsl::*;
-
-        self.with_measured_conn(DatabaseOperation::UpdateTenantShard, move |conn| {
-            let query = match tenant {
-                TenantFilter::Shard(tenant_shard_id) => diesel::update(tenant_shards)
-                    .filter(tenant_id.eq(tenant_shard_id.tenant_id.to_string()))
-                    .filter(shard_number.eq(tenant_shard_id.shard_number.0 as i32))
-                    .filter(shard_count.eq(tenant_shard_id.shard_count.literal() as i32))
-                    .into_boxed(),
-                TenantFilter::Tenant(input_tenant_id) => diesel::update(tenant_shards)
-                    .filter(tenant_id.eq(input_tenant_id.to_string()))
-                    .into_boxed(),
-            };
-
-            #[derive(AsChangeset)]
-            #[diesel(table_name = crate::schema::tenant_shards)]
-            struct ShardUpdate {
-                generation: Option<i32>,
-                placement_policy: Option<String>,
-                config: Option<String>,
-                scheduling_policy: Option<String>,
-            }
-
-            let update = ShardUpdate {
-                generation: input_generation.map(|g| g.into().unwrap() as i32),
-                placement_policy: input_placement_policy
-                    .map(|p| serde_json::to_string(&p).unwrap()),
-                config: input_config.map(|c| serde_json::to_string(&c).unwrap()),
-                scheduling_policy: input_scheduling_policy
-                    .map(|p| serde_json::to_string(&p).unwrap()),
-            };
-
-            query.set(update).execute(conn)?;
-
-            Ok(())
-        })
-        .await?;
-
-        Ok(())
-    }
-
-    pub(crate) async fn detach(&self, tenant_shard_id: TenantShardId) -> anyhow::Result<()> {
-        use crate::schema::tenant_shards::dsl::*;
-        self.with_measured_conn(DatabaseOperation::Detach, move |conn| {
-            let updated = diesel::update(tenant_shards)
-                .filter(tenant_id.eq(tenant_shard_id.tenant_id.to_string()))
-                .filter(shard_number.eq(tenant_shard_id.shard_number.0 as i32))
-                .filter(shard_count.eq(tenant_shard_id.shard_count.literal() as i32))
-                .set((
-                    generation_pageserver.eq(Option::<i64>::None),
-                    placement_policy.eq(serde_json::to_string(&PlacementPolicy::Detached).unwrap()),
-                ))
-                .execute(conn)?;
-
-            Ok(updated)
-        })
-        .await?;
-
-        Ok(())
-    }
-
-    // When we start shard splitting, we must durably mark the tenant so that
-    // on restart, we know that we must go through recovery.
-    //
-    // We create the child shards here, so that they will be available for increment_generation calls
-    // if some pageserver holding a child shard needs to restart before the overall tenant split is complete.
-    pub(crate) async fn begin_shard_split(
-        &self,
-        old_shard_count: ShardCount,
-        split_tenant_id: TenantId,
-        parent_to_children: Vec<(TenantShardId, Vec<TenantShardPersistence>)>,
-    ) -> DatabaseResult<()> {
-        use crate::schema::tenant_shards::dsl::*;
-        self.with_measured_conn(DatabaseOperation::BeginShardSplit, move |conn| -> DatabaseResult<()> {
-            conn.transaction(|conn| -> DatabaseResult<()> {
-                // Mark parent shards as splitting
-
-                let updated = diesel::update(tenant_shards)
-                    .filter(tenant_id.eq(split_tenant_id.to_string()))
-                    .filter(shard_count.eq(old_shard_count.literal() as i32))
-                    .set((splitting.eq(1),))
-                    .execute(conn)?;
-                if u8::try_from(updated)
-                    .map_err(|_| DatabaseError::Logical(
-                        format!("Overflow existing shard count {} while splitting", updated))
-                    )? != old_shard_count.count() {
-                    // Perhaps a deletion or another split raced with this attempt to split, mutating
-                    // the parent shards that we intend to split. In this case the split request should fail.
-                    return Err(DatabaseError::Logical(
-                        format!("Unexpected existing shard count {updated} when preparing tenant for split (expected {})", old_shard_count.count())
-                    ));
-                }
-
-                // FIXME: spurious clone to sidestep closure move rules
-                let parent_to_children = parent_to_children.clone();
-
-                // Insert child shards
-                for (parent_shard_id, children) in parent_to_children {
-                    let mut parent = crate::schema::tenant_shards::table
-                        .filter(tenant_id.eq(parent_shard_id.tenant_id.to_string()))
-                        .filter(shard_number.eq(parent_shard_id.shard_number.0 as i32))
-                        .filter(shard_count.eq(parent_shard_id.shard_count.literal() as i32))
-                        .load::<TenantShardPersistence>(conn)?;
-                    let parent = if parent.len() != 1 {
-                        return Err(DatabaseError::Logical(format!(
-                            "Parent shard {parent_shard_id} not found"
-                        )));
-                    } else {
-                        parent.pop().unwrap()
-                    };
-                    for mut shard in children {
-                        // Carry the parent's generation into the child
-                        shard.generation = parent.generation;
-
-                        debug_assert!(shard.splitting == SplitState::Splitting);
-                        diesel::insert_into(tenant_shards)
-                            .values(shard)
-                            .execute(conn)?;
-                    }
-                }
-
-                Ok(())
-            })?;
-
-            Ok(())
-        })
-        .await
-    }
-
-    // When we finish shard splitting, we must atomically clean up the old shards
-    // and insert the new shards, and clear the splitting marker.
-    pub(crate) async fn complete_shard_split(
-        &self,
-        split_tenant_id: TenantId,
-        old_shard_count: ShardCount,
-    ) -> DatabaseResult<()> {
-        use crate::schema::tenant_shards::dsl::*;
-        self.with_measured_conn(
-            DatabaseOperation::CompleteShardSplit,
-            move |conn| -> DatabaseResult<()> {
-                conn.transaction(|conn| -> QueryResult<()> {
-                    // Drop parent shards
-                    diesel::delete(tenant_shards)
-                        .filter(tenant_id.eq(split_tenant_id.to_string()))
-                        .filter(shard_count.eq(old_shard_count.literal() as i32))
-                        .execute(conn)?;
-
-                    // Clear sharding flag
-                    let updated = diesel::update(tenant_shards)
-                        .filter(tenant_id.eq(split_tenant_id.to_string()))
-                        .set((splitting.eq(0),))
-                        .execute(conn)?;
-                    debug_assert!(updated > 0);
-
-                    Ok(())
-                })?;
-
-                Ok(())
-            },
-        )
-        .await
-    }
-
-    /// Used when the remote part of a shard split failed: we will revert the database state to have only
-    /// the parent shards, with SplitState::Idle.
-    pub(crate) async fn abort_shard_split(
-        &self,
-        split_tenant_id: TenantId,
-        new_shard_count: ShardCount,
-    ) -> DatabaseResult<AbortShardSplitStatus> {
-        use crate::schema::tenant_shards::dsl::*;
-        self.with_measured_conn(
-            DatabaseOperation::AbortShardSplit,
-            move |conn| -> DatabaseResult<AbortShardSplitStatus> {
-                let aborted =
-                    conn.transaction(|conn| -> DatabaseResult<AbortShardSplitStatus> {
-                        // Clear the splitting state on parent shards
-                        let updated = diesel::update(tenant_shards)
-                            .filter(tenant_id.eq(split_tenant_id.to_string()))
-                            .filter(shard_count.ne(new_shard_count.literal() as i32))
-                            .set((splitting.eq(0),))
-                            .execute(conn)?;
-
-                        // Parent shards are already gone: we cannot abort.
-                        if updated == 0 {
-                            return Ok(AbortShardSplitStatus::Complete);
-                        }
-
-                        // Sanity check: if parent shards were present, their cardinality should
-                        // be less than the number of child shards.
-                        if updated >= new_shard_count.count() as usize {
-                            return Err(DatabaseError::Logical(format!(
-                                "Unexpected parent shard count {updated} while aborting split to \
-                            count {new_shard_count:?} on tenant {split_tenant_id}"
-                            )));
-                        }
-
-                        // Erase child shards
-                        diesel::delete(tenant_shards)
-                            .filter(tenant_id.eq(split_tenant_id.to_string()))
-                            .filter(shard_count.eq(new_shard_count.literal() as i32))
-                            .execute(conn)?;
-
-                        Ok(AbortShardSplitStatus::Aborted)
-                    })?;
-
-                Ok(aborted)
-            },
-        )
-        .await
-    }
-}
-
-/// Parts of [`crate::tenant_state::TenantState`] that are stored durably
-#[derive(Queryable, Selectable, Insertable, Serialize, Deserialize, Clone, Eq, PartialEq)]
-#[diesel(table_name = crate::schema::tenant_shards)]
-pub(crate) struct TenantShardPersistence {
-    #[serde(default)]
-    pub(crate) tenant_id: String,
-    #[serde(default)]
-    pub(crate) shard_number: i32,
-    #[serde(default)]
-    pub(crate) shard_count: i32,
-    #[serde(default)]
-    pub(crate) shard_stripe_size: i32,
-
-    // Latest generation number: next time we attach, increment this
-    // and use the incremented number when attaching.
-    //
-    // Generation is only None when first onboarding a tenant, where it may
-    // be in PlacementPolicy::Secondary and therefore have no valid generation state.
-    pub(crate) generation: Option<i32>,
-
-    // Currently attached pageserver
-    #[serde(rename = "pageserver")]
-    pub(crate) generation_pageserver: Option<i64>,
-
-    #[serde(default)]
-    pub(crate) placement_policy: String,
-    #[serde(default)]
-    pub(crate) splitting: SplitState,
-    #[serde(default)]
-    pub(crate) config: String,
-    #[serde(default)]
-    pub(crate) scheduling_policy: String,
-}
-
-impl TenantShardPersistence {
-    pub(crate) fn get_shard_identity(&self) -> Result<ShardIdentity, ShardConfigError> {
-        if self.shard_count == 0 {
-            Ok(ShardIdentity::unsharded())
-        } else {
-            Ok(ShardIdentity::new(
-                ShardNumber(self.shard_number as u8),
-                ShardCount::new(self.shard_count as u8),
-                ShardStripeSize(self.shard_stripe_size as u32),
-            )?)
-        }
-    }
-
-    pub(crate) fn get_tenant_shard_id(&self) -> Result<TenantShardId, hex::FromHexError> {
-        Ok(TenantShardId {
-            tenant_id: TenantId::from_str(self.tenant_id.as_str())?,
-            shard_number: ShardNumber(self.shard_number as u8),
-            shard_count: ShardCount::new(self.shard_count as u8),
-        })
-    }
-}
-
-/// Parts of [`crate::node::Node`] that are stored durably
-#[derive(Serialize, Deserialize, Queryable, Selectable, Insertable, Eq, PartialEq)]
-#[diesel(table_name = crate::schema::nodes)]
-pub(crate) struct NodePersistence {
-    pub(crate) node_id: i64,
-    pub(crate) scheduling_policy: String,
-    pub(crate) listen_http_addr: String,
-    pub(crate) listen_http_port: i32,
-    pub(crate) listen_pg_addr: String,
-    pub(crate) listen_pg_port: i32,
-}

control_plane/attachment_service/src/persistence/split_state.rs

@@ -1,46 +0,0 @@
-use diesel::pg::{Pg, PgValue};
-use diesel::{
-    deserialize::FromSql, deserialize::FromSqlRow, expression::AsExpression, serialize::ToSql,
-    sql_types::Int2,
-};
-use serde::{Deserialize, Serialize};
-
-#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash, PartialOrd, Ord, FromSqlRow, AsExpression)]
-#[diesel(sql_type = SplitStateSQLRepr)]
-#[derive(Deserialize, Serialize)]
-pub enum SplitState {
-    Idle = 0,
-    Splitting = 1,
-}
-
-impl Default for SplitState {
-    fn default() -> Self {
-        Self::Idle
-    }
-}
-
-type SplitStateSQLRepr = Int2;
-
-impl ToSql<SplitStateSQLRepr, Pg> for SplitState {
-    fn to_sql<'a>(
-        &'a self,
-        out: &'a mut diesel::serialize::Output<Pg>,
-    ) -> diesel::serialize::Result {
-        let raw_value: i16 = *self as i16;
-        let mut new_out = out.reborrow();
-        ToSql::<SplitStateSQLRepr, Pg>::to_sql(&raw_value, &mut new_out)
-    }
-}
-
-impl FromSql<SplitStateSQLRepr, Pg> for SplitState {
-    fn from_sql(pg_value: PgValue) -> diesel::deserialize::Result<Self> {
-        match FromSql::<SplitStateSQLRepr, Pg>::from_sql(pg_value).map(|v| match v {
-            0 => Some(Self::Idle),
-            1 => Some(Self::Splitting),
-            _ => None,
-        })? {
-            Some(v) => Ok(v),
-            None => Err(format!("Invalid SplitState value, was: {:?}", pg_value.as_bytes()).into()),
-        }
-    }
-}

control_plane/attachment_service/src/reconciler.rs

@@ -1,810 +0,0 @@
-use crate::pageserver_client::PageserverClient;
-use crate::persistence::Persistence;
-use crate::service;
-use hyper::StatusCode;
-use pageserver_api::models::{
-    LocationConfig, LocationConfigMode, LocationConfigSecondary, TenantConfig,
-};
-use pageserver_api::shard::{ShardIdentity, TenantShardId};
-use pageserver_client::mgmt_api;
-use std::collections::HashMap;
-use std::sync::Arc;
-use std::time::{Duration, Instant};
-use tokio_util::sync::CancellationToken;
-use utils::generation::Generation;
-use utils::id::{NodeId, TimelineId};
-use utils::lsn::Lsn;
-use utils::sync::gate::GateGuard;
-
-use crate::compute_hook::{ComputeHook, NotifyError};
-use crate::node::Node;
-use crate::tenant_state::{IntentState, ObservedState, ObservedStateLocation};
-
-const DEFAULT_HEATMAP_PERIOD: &str = "60s";
-
-/// Object with the lifetime of the background reconcile task that is created
-/// for tenants which have a difference between their intent and observed states.
-pub(super) struct Reconciler {
-    /// See [`crate::tenant_state::TenantState`] for the meanings of these fields: they are a snapshot
-    /// of a tenant's state from when we spawned a reconcile task.
-    pub(super) tenant_shard_id: TenantShardId,
-    pub(crate) shard: ShardIdentity,
-    pub(crate) generation: Option<Generation>,
-    pub(crate) intent: TargetState,
-
-    /// Nodes not referenced by [`Self::intent`], from which we should try
-    /// to detach this tenant shard.
-    pub(crate) detach: Vec<Node>,
-
-    pub(crate) config: TenantConfig,
-    pub(crate) observed: ObservedState,
-
-    pub(crate) service_config: service::Config,
-
-    /// A hook to notify the running postgres instances when we change the location
-    /// of a tenant.  Use this via [`Self::compute_notify`] to update our failure flag
-    /// and guarantee eventual retries.
-    pub(crate) compute_hook: Arc<ComputeHook>,
-
-    /// To avoid stalling if the cloud control plane is unavailable, we may proceed
-    /// past failures in [`ComputeHook::notify`], but we _must_ remember that we failed
-    /// so that we can set [`crate::tenant_state::TenantState::pending_compute_notification`] to ensure a later retry.
-    pub(crate) compute_notify_failure: bool,
-
-    /// A means to abort background reconciliation: it is essential to
-    /// call this when something changes in the original TenantState that
-    /// will make this reconciliation impossible or unnecessary, for
-    /// example when a pageserver node goes offline, or the PlacementPolicy for
-    /// the tenant is changed.
-    pub(crate) cancel: CancellationToken,
-
-    /// Reconcilers are registered with a Gate so that during a graceful shutdown we
-    /// can wait for all the reconcilers to respond to their cancellation tokens.
-    pub(crate) _gate_guard: GateGuard,
-
-    /// Access to persistent storage for updating generation numbers
-    pub(crate) persistence: Arc<Persistence>,
-}
-
-/// This is a snapshot of [`crate::tenant_state::IntentState`], but it does not do any
-/// reference counting for Scheduler.  The IntentState is what the scheduler works with,
-/// and the TargetState is just the instruction for a particular Reconciler run.
-#[derive(Debug)]
-pub(crate) struct TargetState {
-    pub(crate) attached: Option<Node>,
-    pub(crate) secondary: Vec<Node>,
-}
-
-impl TargetState {
-    pub(crate) fn from_intent(nodes: &HashMap<NodeId, Node>, intent: &IntentState) -> Self {
-        Self {
-            attached: intent.get_attached().map(|n| {
-                nodes
-                    .get(&n)
-                    .expect("Intent attached referenced non-existent node")
-                    .clone()
-            }),
-            secondary: intent
-                .get_secondary()
-                .iter()
-                .map(|n| {
-                    nodes
-                        .get(n)
-                        .expect("Intent secondary referenced non-existent node")
-                        .clone()
-                })
-                .collect(),
-        }
-    }
-}
-
-#[derive(thiserror::Error, Debug)]
-pub(crate) enum ReconcileError {
-    #[error(transparent)]
-    Remote(#[from] mgmt_api::Error),
-    #[error(transparent)]
-    Notify(#[from] NotifyError),
-    #[error("Cancelled")]
-    Cancel,
-    #[error(transparent)]
-    Other(#[from] anyhow::Error),
-}
-
-impl Reconciler {
-    async fn location_config(
-        &mut self,
-        node: &Node,
-        config: LocationConfig,
-        flush_ms: Option<Duration>,
-        lazy: bool,
-    ) -> Result<(), ReconcileError> {
-        if !node.is_available() && config.mode == LocationConfigMode::Detached {
-            // Attempts to detach from offline nodes may be imitated without doing I/O: a node which is offline
-            // will get fully reconciled wrt the shard's intent state when it is reactivated, irrespective of
-            // what we put into `observed`, in [`crate::service::Service::node_activate_reconcile`]
-            tracing::info!("Node {node} is unavailable during detach: proceeding anyway, it will be detached on next activation");
-            self.observed.locations.remove(&node.get_id());
-            return Ok(());
-        }
-
-        self.observed
-            .locations
-            .insert(node.get_id(), ObservedStateLocation { conf: None });
-
-        // TODO: amend locations that use long-polling: they will hit this timeout.
-        let timeout = Duration::from_secs(25);
-
-        tracing::info!("location_config({node}) calling: {:?}", config);
-        let tenant_shard_id = self.tenant_shard_id;
-        let config_ref = &config;
-        match node
-            .with_client_retries(
-                |client| async move {
-                    let config = config_ref.clone();
-                    client
-                        .location_config(tenant_shard_id, config.clone(), flush_ms, lazy)
-                        .await
-                },
-                &self.service_config.jwt_token,
-                1,
-                3,
-                timeout,
-                &self.cancel,
-            )
-            .await
-        {
-            Some(Ok(_)) => {}
-            Some(Err(e)) => return Err(e.into()),
-            None => return Err(ReconcileError::Cancel),
-        };
-        tracing::info!("location_config({node}) complete: {:?}", config);
-
-        match config.mode {
-            LocationConfigMode::Detached => {
-                self.observed.locations.remove(&node.get_id());
-            }
-            _ => {
-                self.observed
-                    .locations
-                    .insert(node.get_id(), ObservedStateLocation { conf: Some(config) });
-            }
-        }
-
-        Ok(())
-    }
-
-    fn get_node(&self, node_id: &NodeId) -> Option<&Node> {
-        if let Some(node) = self.intent.attached.as_ref() {
-            if node.get_id() == *node_id {
-                return Some(node);
-            }
-        }
-
-        if let Some(node) = self
-            .intent
-            .secondary
-            .iter()
-            .find(|n| n.get_id() == *node_id)
-        {
-            return Some(node);
-        }
-
-        if let Some(node) = self.detach.iter().find(|n| n.get_id() == *node_id) {
-            return Some(node);
-        }
-
-        None
-    }
-
-    async fn maybe_live_migrate(&mut self) -> Result<(), ReconcileError> {
-        let destination = if let Some(node) = &self.intent.attached {
-            match self.observed.locations.get(&node.get_id()) {
-                Some(conf) => {
-                    // We will do a live migration only if the intended destination is not
-                    // currently in an attached state.
-                    match &conf.conf {
-                        Some(conf) if conf.mode == LocationConfigMode::Secondary => {
-                            // Fall through to do a live migration
-                            node
-                        }
-                        None | Some(_) => {
-                            // Attached or uncertain: don't do a live migration, proceed
-                            // with a general-case reconciliation
-                            tracing::info!("maybe_live_migrate: destination is None or attached");
-                            return Ok(());
-                        }
-                    }
-                }
-                None => {
-                    // Our destination is not attached: maybe live migrate if some other
-                    // node is currently attached.  Fall through.
-                    node
-                }
-            }
-        } else {
-            // No intent to be attached
-            tracing::info!("maybe_live_migrate: no attached intent");
-            return Ok(());
-        };
-
-        let mut origin = None;
-        for (node_id, state) in &self.observed.locations {
-            if let Some(observed_conf) = &state.conf {
-                if observed_conf.mode == LocationConfigMode::AttachedSingle {
-                    // We will only attempt live migration if the origin is not offline: this
-                    // avoids trying to do it while reconciling after responding to an HA failover.
-                    if let Some(node) = self.get_node(node_id) {
-                        if node.is_available() {
-                            origin = Some(node.clone());
-                            break;
-                        }
-                    }
-                }
-            }
-        }
-
-        let Some(origin) = origin else {
-            tracing::info!("maybe_live_migrate: no origin found");
-            return Ok(());
-        };
-
-        // We have an origin and a destination: proceed to do the live migration
-        tracing::info!("Live migrating {}->{}", origin, destination);
-        self.live_migrate(origin, destination.clone()).await?;
-
-        Ok(())
-    }
-
-    async fn get_lsns(
-        &self,
-        tenant_shard_id: TenantShardId,
-        node: &Node,
-    ) -> anyhow::Result<HashMap<TimelineId, Lsn>> {
-        let client = PageserverClient::new(
-            node.get_id(),
-            node.base_url(),
-            self.service_config.jwt_token.as_deref(),
-        );
-
-        let timelines = client.timeline_list(&tenant_shard_id).await?;
-        Ok(timelines
-            .into_iter()
-            .map(|t| (t.timeline_id, t.last_record_lsn))
-            .collect())
-    }
-
-    async fn secondary_download(
-        &self,
-        tenant_shard_id: TenantShardId,
-        node: &Node,
-    ) -> Result<(), ReconcileError> {
-        // This is not the timeout for a request, but the total amount of time we're willing to wait
-        // for a secondary location to get up to date before
-        const TOTAL_DOWNLOAD_TIMEOUT: Duration = Duration::from_secs(300);
-
-        // This the long-polling interval for the secondary download requests we send to destination pageserver
-        // during a migration.
-        const REQUEST_DOWNLOAD_TIMEOUT: Duration = Duration::from_secs(20);
-
-        let started_at = Instant::now();
-
-        loop {
-            let (status, progress) = match node
-                .with_client_retries(
-                    |client| async move {
-                        client
-                            .tenant_secondary_download(
-                                tenant_shard_id,
-                                Some(REQUEST_DOWNLOAD_TIMEOUT),
-                            )
-                            .await
-                    },
-                    &self.service_config.jwt_token,
-                    1,
-                    3,
-                    REQUEST_DOWNLOAD_TIMEOUT * 2,
-                    &self.cancel,
-                )
-                .await
-            {
-                None => Err(ReconcileError::Cancel),
-                Some(Ok(v)) => Ok(v),
-                Some(Err(e)) => {
-                    // Give up, but proceed: it's unfortunate if we couldn't freshen the destination before
-                    // attaching, but we should not let an issue with a secondary location stop us proceeding
-                    // with a live migration.
-                    tracing::warn!("Failed to prepare by downloading layers on node {node}: {e})");
-                    return Ok(());
-                }
-            }?;
-
-            if status == StatusCode::OK {
-                tracing::info!(
-                    "Downloads to {} complete: {}/{} layers, {}/{} bytes",
-                    node,
-                    progress.layers_downloaded,
-                    progress.layers_total,
-                    progress.bytes_downloaded,
-                    progress.bytes_total
-                );
-                return Ok(());
-            } else if status == StatusCode::ACCEPTED {
-                let total_runtime = started_at.elapsed();
-                if total_runtime > TOTAL_DOWNLOAD_TIMEOUT {
-                    tracing::warn!("Timed out after {}ms downloading layers to {node}.  Progress so far: {}/{} layers, {}/{} bytes",
-                        total_runtime.as_millis(),
-                        progress.layers_downloaded,
-                        progress.layers_total,
-                        progress.bytes_downloaded,
-                        progress.bytes_total
-                    );
-                    // Give up, but proceed: an incompletely warmed destination doesn't prevent migration working,
-                    // it just makes the I/O performance for users less good.
-                    return Ok(());
-                }
-
-                // Log and proceed around the loop to retry.  We don't sleep between requests, because our HTTP call
-                // to the pageserver is a long-poll.
-                tracing::info!(
-                    "Downloads to {} not yet complete: {}/{} layers, {}/{} bytes",
-                    node,
-                    progress.layers_downloaded,
-                    progress.layers_total,
-                    progress.bytes_downloaded,
-                    progress.bytes_total
-                );
-            }
-        }
-    }
-
-    async fn await_lsn(
-        &self,
-        tenant_shard_id: TenantShardId,
-        node: &Node,
-        baseline: HashMap<TimelineId, Lsn>,
-    ) -> anyhow::Result<()> {
-        loop {
-            let latest = match self.get_lsns(tenant_shard_id, node).await {
-                Ok(l) => l,
-                Err(e) => {
-                    tracing::info!("🕑 Can't get LSNs on node {node} yet, waiting ({e})",);
-                    std::thread::sleep(Duration::from_millis(500));
-                    continue;
-                }
-            };
-
-            let mut any_behind: bool = false;
-            for (timeline_id, baseline_lsn) in &baseline {
-                match latest.get(timeline_id) {
-                    Some(latest_lsn) => {
-                        tracing::info!("🕑 LSN origin {baseline_lsn} vs destination {latest_lsn}");
-                        if latest_lsn < baseline_lsn {
-                            any_behind = true;
-                        }
-                    }
-                    None => {
-                        // Expected timeline isn't yet visible on migration destination.
-                        // (IRL we would have to account for timeline deletion, but this
-                        //  is just test helper)
-                        any_behind = true;
-                    }
-                }
-            }
-
-            if !any_behind {
-                tracing::info!("✅ LSN caught up.  Proceeding...");
-                break;
-            } else {
-                std::thread::sleep(Duration::from_millis(500));
-            }
-        }
-
-        Ok(())
-    }
-
-    pub async fn live_migrate(
-        &mut self,
-        origin_ps: Node,
-        dest_ps: Node,
-    ) -> Result<(), ReconcileError> {
-        // `maybe_live_migrate` is responsibble for sanity of inputs
-        assert!(origin_ps.get_id() != dest_ps.get_id());
-
-        fn build_location_config(
-            shard: &ShardIdentity,
-            config: &TenantConfig,
-            mode: LocationConfigMode,
-            generation: Option<Generation>,
-            secondary_conf: Option<LocationConfigSecondary>,
-        ) -> LocationConfig {
-            LocationConfig {
-                mode,
-                generation: generation.map(|g| g.into().unwrap()),
-                secondary_conf,
-                tenant_conf: config.clone(),
-                shard_number: shard.number.0,
-                shard_count: shard.count.literal(),
-                shard_stripe_size: shard.stripe_size.0,
-            }
-        }
-
-        tracing::info!("🔁 Switching origin node {origin_ps} to stale mode",);
-
-        // FIXME: it is incorrect to use self.generation here, we should use the generation
-        // from the ObservedState of the origin pageserver (it might be older than self.generation)
-        let stale_conf = build_location_config(
-            &self.shard,
-            &self.config,
-            LocationConfigMode::AttachedStale,
-            self.generation,
-            None,
-        );
-        self.location_config(&origin_ps, stale_conf, Some(Duration::from_secs(10)), false)
-            .await?;
-
-        let baseline_lsns = Some(self.get_lsns(self.tenant_shard_id, &origin_ps).await?);
-
-        // If we are migrating to a destination that has a secondary location, warm it up first
-        if let Some(destination_conf) = self.observed.locations.get(&dest_ps.get_id()) {
-            if let Some(destination_conf) = &destination_conf.conf {
-                if destination_conf.mode == LocationConfigMode::Secondary {
-                    tracing::info!("🔁 Downloading latest layers to destination node {dest_ps}",);
-                    self.secondary_download(self.tenant_shard_id, &dest_ps)
-                        .await?;
-                }
-            }
-        }
-
-        // Increment generation before attaching to new pageserver
-        self.generation = Some(
-            self.persistence
-                .increment_generation(self.tenant_shard_id, dest_ps.get_id())
-                .await?,
-        );
-
-        let dest_conf = build_location_config(
-            &self.shard,
-            &self.config,
-            LocationConfigMode::AttachedMulti,
-            self.generation,
-            None,
-        );
-
-        tracing::info!("🔁 Attaching to pageserver {dest_ps}");
-        self.location_config(&dest_ps, dest_conf, None, false)
-            .await?;
-
-        if let Some(baseline) = baseline_lsns {
-            tracing::info!("🕑 Waiting for LSN to catch up...");
-            self.await_lsn(self.tenant_shard_id, &dest_ps, baseline)
-                .await?;
-        }
-
-        tracing::info!("🔁 Notifying compute to use pageserver {dest_ps}");
-
-        // During a live migration it is unhelpful to proceed if we couldn't notify compute: if we detach
-        // the origin without notifying compute, we will render the tenant unavailable.
-        while let Err(e) = self.compute_notify().await {
-            match e {
-                NotifyError::Fatal(_) => return Err(ReconcileError::Notify(e)),
-                NotifyError::ShuttingDown => return Err(ReconcileError::Cancel),
-                _ => {
-                    tracing::warn!(
-                        "Live migration blocked by compute notification error, retrying: {e}"
-                    );
-                }
-            }
-        }
-
-        // Downgrade the origin to secondary.  If the tenant's policy is PlacementPolicy::Attached(0), then
-        // this location will be deleted in the general case reconciliation that runs after this.
-        let origin_secondary_conf = build_location_config(
-            &self.shard,
-            &self.config,
-            LocationConfigMode::Secondary,
-            None,
-            Some(LocationConfigSecondary { warm: true }),
-        );
-        self.location_config(&origin_ps, origin_secondary_conf.clone(), None, false)
-            .await?;
-        // TODO: we should also be setting the ObservedState on earlier API calls, in case we fail
-        // partway through.  In fact, all location conf API calls should be in a wrapper that sets
-        // the observed state to None, then runs, then sets it to what we wrote.
-        self.observed.locations.insert(
-            origin_ps.get_id(),
-            ObservedStateLocation {
-                conf: Some(origin_secondary_conf),
-            },
-        );
-
-        tracing::info!("🔁 Switching to AttachedSingle mode on node {dest_ps}",);
-        let dest_final_conf = build_location_config(
-            &self.shard,
-            &self.config,
-            LocationConfigMode::AttachedSingle,
-            self.generation,
-            None,
-        );
-        self.location_config(&dest_ps, dest_final_conf.clone(), None, false)
-            .await?;
-        self.observed.locations.insert(
-            dest_ps.get_id(),
-            ObservedStateLocation {
-                conf: Some(dest_final_conf),
-            },
-        );
-
-        tracing::info!("✅ Migration complete");
-
-        Ok(())
-    }
-
-    async fn maybe_refresh_observed(&mut self) -> Result<(), ReconcileError> {
-        // If the attached node has uncertain state, read it from the pageserver before proceeding: this
-        // is important to avoid spurious generation increments.
-        //
-        // We don't need to do this for secondary/detach locations because it's harmless to just PUT their
-        // location conf, whereas for attached locations it can interrupt clients if we spuriously destroy/recreate
-        // the `Timeline` object in the pageserver.
-
-        let Some(attached_node) = self.intent.attached.as_ref() else {
-            // Nothing to do
-            return Ok(());
-        };
-
-        if matches!(
-            self.observed.locations.get(&attached_node.get_id()),
-            Some(ObservedStateLocation { conf: None })
-        ) {
-            let tenant_shard_id = self.tenant_shard_id;
-            let observed_conf = match attached_node
-                .with_client_retries(
-                    |client| async move { client.get_location_config(tenant_shard_id).await },
-                    &self.service_config.jwt_token,
-                    1,
-                    1,
-                    Duration::from_secs(5),
-                    &self.cancel,
-                )
-                .await
-            {
-                Some(Ok(observed)) => Some(observed),
-                Some(Err(mgmt_api::Error::ApiError(status, _msg)))
-                    if status == StatusCode::NOT_FOUND =>
-                {
-                    None
-                }
-                Some(Err(e)) => return Err(e.into()),
-                None => return Err(ReconcileError::Cancel),
-            };
-            tracing::info!("Scanned location configuration on {attached_node}: {observed_conf:?}");
-            match observed_conf {
-                Some(conf) => {
-                    // Pageserver returned a state: update it in observed.  This may still be an indeterminate (None) state,
-                    // if internally the pageserver's TenantSlot was being mutated (e.g. some long running API call is still running)
-                    self.observed
-                        .locations
-                        .insert(attached_node.get_id(), ObservedStateLocation { conf });
-                }
-                None => {
-                    // Pageserver returned 404: we have confirmation that there is no state for this shard on that pageserver.
-                    self.observed.locations.remove(&attached_node.get_id());
-                }
-            }
-        }
-
-        Ok(())
-    }
-
-    /// Reconciling a tenant makes API calls to pageservers until the observed state
-    /// matches the intended state.
-    ///
-    /// First we apply special case handling (e.g. for live migrations), and then a
-    /// general case reconciliation where we walk through the intent by pageserver
-    /// and call out to the pageserver to apply the desired state.
-    pub(crate) async fn reconcile(&mut self) -> Result<(), ReconcileError> {
-        // Prepare: if we have uncertain `observed` state for our would-be attachement location, then refresh it
-        self.maybe_refresh_observed().await?;
-
-        // Special case: live migration
-        self.maybe_live_migrate().await?;
-
-        // If the attached pageserver is not attached, do so now.
-        if let Some(node) = self.intent.attached.as_ref() {
-            // If we are in an attached policy, then generation must have been set (null generations
-            // are only present when a tenant is initially loaded with a secondary policy)
-            debug_assert!(self.generation.is_some());
-            let Some(generation) = self.generation else {
-                return Err(ReconcileError::Other(anyhow::anyhow!(
-                    "Attempted to attach with NULL generation"
-                )));
-            };
-
-            let mut wanted_conf = attached_location_conf(
-                generation,
-                &self.shard,
-                &self.config,
-                !self.intent.secondary.is_empty(),
-            );
-            match self.observed.locations.get(&node.get_id()) {
-                Some(conf) if conf.conf.as_ref() == Some(&wanted_conf) => {
-                    // Nothing to do
-                    tracing::info!(node_id=%node.get_id(), "Observed configuration already correct.")
-                }
-                observed => {
-                    // In all cases other than a matching observed configuration, we will
-                    // reconcile this location.  This includes locations with different configurations, as well
-                    // as locations with unknown (None) observed state.
-
-                    // The general case is to increment the generation.  However, there are cases
-                    // where this is not necessary:
-                    // - if we are only updating the TenantConf part of the location
-                    // - if we are only changing the attachment mode (e.g. going to attachedmulti or attachedstale)
-                    //   and the location was already in the correct generation
-                    let increment_generation = match observed {
-                        None => true,
-                        Some(ObservedStateLocation { conf: None }) => true,
-                        Some(ObservedStateLocation {
-                            conf: Some(observed),
-                        }) => {
-                            let generations_match = observed.generation == wanted_conf.generation;
-
-                            use LocationConfigMode::*;
-                            let mode_transition_requires_gen_inc =
-                                match (observed.mode, wanted_conf.mode) {
-                                    // Usually the short-lived attachment modes (multi and stale) are only used
-                                    // in the case of [`Self::live_migrate`], but it is simple to handle them correctly
-                                    // here too.  Locations are allowed to go Single->Stale and Multi->Single within the same generation.
-                                    (AttachedSingle, AttachedStale) => false,
-                                    (AttachedMulti, AttachedSingle) => false,
-                                    (lhs, rhs) => lhs != rhs,
-                                };
-
-                            !generations_match || mode_transition_requires_gen_inc
-                        }
-                    };
-
-                    if increment_generation {
-                        let generation = self
-                            .persistence
-                            .increment_generation(self.tenant_shard_id, node.get_id())
-                            .await?;
-                        self.generation = Some(generation);
-                        wanted_conf.generation = generation.into();
-                    }
-                    tracing::info!(node_id=%node.get_id(), "Observed configuration requires update.");
-
-                    // Because `node` comes from a ref to &self, clone it before calling into a &mut self
-                    // function: this could be avoided by refactoring the state mutated by location_config into
-                    // a separate type to Self.
-                    let node = node.clone();
-
-                    // Use lazy=true, because we may run many of Self concurrently, and do not want to
-                    // overload the pageserver with logical size calculations.
-                    self.location_config(&node, wanted_conf, None, true).await?;
-                    self.compute_notify().await?;
-                }
-            }
-        }
-
-        // Configure secondary locations: if these were previously attached this
-        // implicitly downgrades them from attached to secondary.
-        let mut changes = Vec::new();
-        for node in &self.intent.secondary {
-            let wanted_conf = secondary_location_conf(&self.shard, &self.config);
-            match self.observed.locations.get(&node.get_id()) {
-                Some(conf) if conf.conf.as_ref() == Some(&wanted_conf) => {
-                    // Nothing to do
-                    tracing::info!(node_id=%node.get_id(), "Observed configuration already correct.")
-                }
-                _ => {
-                    // In all cases other than a matching observed configuration, we will
-                    // reconcile this location.
-                    tracing::info!(node_id=%node.get_id(), "Observed configuration requires update.");
-                    changes.push((node.clone(), wanted_conf))
-                }
-            }
-        }
-
-        // Detach any extraneous pageservers that are no longer referenced
-        // by our intent.
-        for node in &self.detach {
-            changes.push((
-                node.clone(),
-                LocationConfig {
-                    mode: LocationConfigMode::Detached,
-                    generation: None,
-                    secondary_conf: None,
-                    shard_number: self.shard.number.0,
-                    shard_count: self.shard.count.literal(),
-                    shard_stripe_size: self.shard.stripe_size.0,
-                    tenant_conf: self.config.clone(),
-                },
-            ));
-        }
-
-        for (node, conf) in changes {
-            if self.cancel.is_cancelled() {
-                return Err(ReconcileError::Cancel);
-            }
-            self.location_config(&node, conf, None, false).await?;
-        }
-
-        Ok(())
-    }
-
-    pub(crate) async fn compute_notify(&mut self) -> Result<(), NotifyError> {
-        // Whenever a particular Reconciler emits a notification, it is always notifying for the intended
-        // destination.
-        if let Some(node) = &self.intent.attached {
-            let result = self
-                .compute_hook
-                .notify(
-                    self.tenant_shard_id,
-                    node.get_id(),
-                    self.shard.stripe_size,
-                    &self.cancel,
-                )
-                .await;
-            if let Err(e) = &result {
-                // It is up to the caller whether they want to drop out on this error, but they don't have to:
-                // in general we should avoid letting unavailability of the cloud control plane stop us from
-                // making progress.
-                tracing::warn!("Failed to notify compute of attached pageserver {node}: {e}");
-                // Set this flag so that in our ReconcileResult we will set the flag on the shard that it
-                // needs to retry at some point.
-                self.compute_notify_failure = true;
-            }
-            result
-        } else {
-            Ok(())
-        }
-    }
-}
-
-/// We tweak the externally-set TenantConfig while configuring
-/// locations, using our awareness of whether secondary locations
-/// are in use to automatically enable/disable heatmap uploads.
-fn ha_aware_config(config: &TenantConfig, has_secondaries: bool) -> TenantConfig {
-    let mut config = config.clone();
-    if has_secondaries {
-        if config.heatmap_period.is_none() {
-            config.heatmap_period = Some(DEFAULT_HEATMAP_PERIOD.to_string());
-        }
-    } else {
-        config.heatmap_period = None;
-    }
-    config
-}
-
-pub(crate) fn attached_location_conf(
-    generation: Generation,
-    shard: &ShardIdentity,
-    config: &TenantConfig,
-    has_secondaries: bool,
-) -> LocationConfig {
-    LocationConfig {
-        mode: LocationConfigMode::AttachedSingle,
-        generation: generation.into(),
-        secondary_conf: None,
-        shard_number: shard.number.0,
-        shard_count: shard.count.literal(),
-        shard_stripe_size: shard.stripe_size.0,
-        tenant_conf: ha_aware_config(config, has_secondaries),
-    }
-}
-
-pub(crate) fn secondary_location_conf(
-    shard: &ShardIdentity,
-    config: &TenantConfig,
-) -> LocationConfig {
-    LocationConfig {
-        mode: LocationConfigMode::Secondary,
-        generation: None,
-        secondary_conf: Some(LocationConfigSecondary { warm: true }),
-        shard_number: shard.number.0,
-        shard_count: shard.count.literal(),
-        shard_stripe_size: shard.stripe_size.0,
-        tenant_conf: ha_aware_config(config, true),
-    }
-}

control_plane/attachment_service/src/scheduler.rs

@@ -1,445 +0,0 @@
-use crate::{node::Node, tenant_state::TenantState};
-use pageserver_api::controller_api::UtilizationScore;
-use serde::Serialize;
-use std::collections::HashMap;
-use utils::{http::error::ApiError, id::NodeId};
-
-/// Scenarios in which we cannot find a suitable location for a tenant shard
-#[derive(thiserror::Error, Debug)]
-pub enum ScheduleError {
-    #[error("No pageservers found")]
-    NoPageservers,
-    #[error("No pageserver found matching constraint")]
-    ImpossibleConstraint,
-}
-
-impl From<ScheduleError> for ApiError {
-    fn from(value: ScheduleError) -> Self {
-        ApiError::Conflict(format!("Scheduling error: {}", value))
-    }
-}
-
-#[derive(Serialize, Eq, PartialEq)]
-pub enum MaySchedule {
-    Yes(UtilizationScore),
-    No,
-}
-
-#[derive(Serialize)]
-struct SchedulerNode {
-    /// How many shards are currently scheduled on this node, via their [`crate::tenant_state::IntentState`].
-    shard_count: usize,
-
-    /// Whether this node is currently elegible to have new shards scheduled (this is derived
-    /// from a node's availability state and scheduling policy).
-    may_schedule: MaySchedule,
-}
-
-impl PartialEq for SchedulerNode {
-    fn eq(&self, other: &Self) -> bool {
-        let may_schedule_matches = matches!(
-            (&self.may_schedule, &other.may_schedule),
-            (MaySchedule::Yes(_), MaySchedule::Yes(_)) | (MaySchedule::No, MaySchedule::No)
-        );
-
-        may_schedule_matches && self.shard_count == other.shard_count
-    }
-}
-
-impl Eq for SchedulerNode {}
-
-/// This type is responsible for selecting which node is used when a tenant shard needs to choose a pageserver
-/// on which to run.
-///
-/// The type has no persistent state of its own: this is all populated at startup.  The Serialize
-/// impl is only for debug dumps.
-#[derive(Serialize)]
-pub(crate) struct Scheduler {
-    nodes: HashMap<NodeId, SchedulerNode>,
-}
-
-/// Score for soft constraint scheduling: lower scores are preferred to higher scores.
-///
-/// For example, we may set an affinity score based on the number of shards from the same
-/// tenant already on a node, to implicitly prefer to balance out shards.
-#[derive(Copy, Clone, Debug, Eq, PartialEq, PartialOrd, Ord)]
-pub(crate) struct AffinityScore(pub(crate) usize);
-
-impl AffinityScore {
-    /// If we have no anti-affinity at all toward a node, this is its score.  It means
-    /// the scheduler has a free choice amongst nodes with this score, and may pick a node
-    /// based on other information such as total utilization.
-    pub(crate) const FREE: Self = Self(0);
-
-    pub(crate) fn inc(&mut self) {
-        self.0 += 1;
-    }
-}
-
-impl std::ops::Add for AffinityScore {
-    type Output = Self;
-
-    fn add(self, rhs: Self) -> Self::Output {
-        Self(self.0 + rhs.0)
-    }
-}
-
-// For carrying state between multiple calls to [`TenantState::schedule`], e.g. when calling
-// it for many shards in the same tenant.
-#[derive(Debug, Default)]
-pub(crate) struct ScheduleContext {
-    /// Sparse map of nodes: omitting a node implicitly makes its affinity [`AffinityScore::FREE`]
-    pub(crate) nodes: HashMap<NodeId, AffinityScore>,
-
-    /// Specifically how many _attached_ locations are on each node
-    pub(crate) attached_nodes: HashMap<NodeId, usize>,
-}
-
-impl ScheduleContext {
-    /// Input is a list of nodes we would like to avoid using again within this context.  The more
-    /// times a node is passed into this call, the less inclined we are to use it.
-    pub(crate) fn avoid(&mut self, nodes: &[NodeId]) {
-        for node_id in nodes {
-            let entry = self.nodes.entry(*node_id).or_insert(AffinityScore::FREE);
-            entry.inc()
-        }
-    }
-
-    pub(crate) fn push_attached(&mut self, node_id: NodeId) {
-        let entry = self.attached_nodes.entry(node_id).or_default();
-        *entry += 1;
-    }
-
-    pub(crate) fn get_node_affinity(&self, node_id: NodeId) -> AffinityScore {
-        self.nodes
-            .get(&node_id)
-            .copied()
-            .unwrap_or(AffinityScore::FREE)
-    }
-
-    pub(crate) fn get_node_attachments(&self, node_id: NodeId) -> usize {
-        self.attached_nodes.get(&node_id).copied().unwrap_or(0)
-    }
-}
-
-impl Scheduler {
-    pub(crate) fn new<'a>(nodes: impl Iterator<Item = &'a Node>) -> Self {
-        let mut scheduler_nodes = HashMap::new();
-        for node in nodes {
-            scheduler_nodes.insert(
-                node.get_id(),
-                SchedulerNode {
-                    shard_count: 0,
-                    may_schedule: node.may_schedule(),
-                },
-            );
-        }
-
-        Self {
-            nodes: scheduler_nodes,
-        }
-    }
-
-    /// For debug/support: check that our internal statistics are in sync with the state of
-    /// the nodes & tenant shards.
-    ///
-    /// If anything is inconsistent, log details and return an error.
-    pub(crate) fn consistency_check<'a>(
-        &self,
-        nodes: impl Iterator<Item = &'a Node>,
-        shards: impl Iterator<Item = &'a TenantState>,
-    ) -> anyhow::Result<()> {
-        let mut expect_nodes: HashMap<NodeId, SchedulerNode> = HashMap::new();
-        for node in nodes {
-            expect_nodes.insert(
-                node.get_id(),
-                SchedulerNode {
-                    shard_count: 0,
-                    may_schedule: node.may_schedule(),
-                },
-            );
-        }
-
-        for shard in shards {
-            if let Some(node_id) = shard.intent.get_attached() {
-                match expect_nodes.get_mut(node_id) {
-                    Some(node) => node.shard_count += 1,
-                    None => anyhow::bail!(
-                        "Tenant {} references nonexistent node {}",
-                        shard.tenant_shard_id,
-                        node_id
-                    ),
-                }
-            }
-
-            for node_id in shard.intent.get_secondary() {
-                match expect_nodes.get_mut(node_id) {
-                    Some(node) => node.shard_count += 1,
-                    None => anyhow::bail!(
-                        "Tenant {} references nonexistent node {}",
-                        shard.tenant_shard_id,
-                        node_id
-                    ),
-                }
-            }
-        }
-
-        for (node_id, expect_node) in &expect_nodes {
-            let Some(self_node) = self.nodes.get(node_id) else {
-                anyhow::bail!("Node {node_id} not found in Self")
-            };
-
-            if self_node != expect_node {
-                tracing::error!("Inconsistency detected in scheduling state for node {node_id}");
-                tracing::error!("Expected state: {}", serde_json::to_string(expect_node)?);
-                tracing::error!("Self state: {}", serde_json::to_string(self_node)?);
-
-                anyhow::bail!("Inconsistent state on {node_id}");
-            }
-        }
-
-        if expect_nodes.len() != self.nodes.len() {
-            // We just checked that all the expected nodes are present.  If the lengths don't match,
-            // it means that we have nodes in Self that are unexpected.
-            for node_id in self.nodes.keys() {
-                if !expect_nodes.contains_key(node_id) {
-                    anyhow::bail!("Node {node_id} found in Self but not in expected nodes");
-                }
-            }
-        }
-
-        Ok(())
-    }
-
-    /// Increment the reference count of a node.  This reference count is used to guide scheduling
-    /// decisions, not for memory management: it represents one tenant shard whose IntentState targets
-    /// this node.
-    ///
-    /// It is an error to call this for a node that is not known to the scheduler (i.e. passed into
-    /// [`Self::new`] or [`Self::node_upsert`])
-    pub(crate) fn node_inc_ref(&mut self, node_id: NodeId) {
-        let Some(node) = self.nodes.get_mut(&node_id) else {
-            tracing::error!("Scheduler missing node {node_id}");
-            debug_assert!(false);
-            return;
-        };
-
-        node.shard_count += 1;
-    }
-
-    /// Decrement a node's reference count.  Inverse of [`Self::node_inc_ref`].
-    pub(crate) fn node_dec_ref(&mut self, node_id: NodeId) {
-        let Some(node) = self.nodes.get_mut(&node_id) else {
-            debug_assert!(false);
-            tracing::error!("Scheduler missing node {node_id}");
-            return;
-        };
-
-        node.shard_count -= 1;
-    }
-
-    pub(crate) fn node_upsert(&mut self, node: &Node) {
-        use std::collections::hash_map::Entry::*;
-        match self.nodes.entry(node.get_id()) {
-            Occupied(mut entry) => {
-                entry.get_mut().may_schedule = node.may_schedule();
-            }
-            Vacant(entry) => {
-                entry.insert(SchedulerNode {
-                    shard_count: 0,
-                    may_schedule: node.may_schedule(),
-                });
-            }
-        }
-    }
-
-    pub(crate) fn node_remove(&mut self, node_id: NodeId) {
-        if self.nodes.remove(&node_id).is_none() {
-            tracing::warn!(node_id=%node_id, "Removed non-existent node from scheduler");
-        }
-    }
-
-    /// Where we have several nodes to choose from, for example when picking a secondary location
-    /// to promote to an attached location, this method may be used to pick the best choice based
-    /// on the scheduler's knowledge of utilization and availability.
-    ///
-    /// If the input is empty, or all the nodes are not elegible for scheduling, return None: the
-    /// caller can pick a node some other way.
-    pub(crate) fn node_preferred(&self, nodes: &[NodeId]) -> Option<NodeId> {
-        if nodes.is_empty() {
-            return None;
-        }
-
-        // TODO: When the utilization score returned by the pageserver becomes meaningful,
-        // schedule based on that instead of the shard count.
-        let node = nodes
-            .iter()
-            .map(|node_id| {
-                let may_schedule = self
-                    .nodes
-                    .get(node_id)
-                    .map(|n| n.may_schedule != MaySchedule::No)
-                    .unwrap_or(false);
-                (*node_id, may_schedule)
-            })
-            .max_by_key(|(_n, may_schedule)| *may_schedule);
-
-        // If even the preferred node has may_schedule==false, return None
-        node.and_then(|(node_id, may_schedule)| if may_schedule { Some(node_id) } else { None })
-    }
-
-    /// hard_exclude: it is forbidden to use nodes in this list, typically becacuse they
-    /// are already in use by this shard -- we use this to avoid picking the same node
-    /// as both attached and secondary location.  This is a hard constraint: if we cannot
-    /// find any nodes that aren't in this list, then we will return a [`ScheduleError::ImpossibleConstraint`].
-    ///
-    /// context: we prefer to avoid using nodes identified in the context, according
-    /// to their anti-affinity score.  We use this to prefeer to avoid placing shards in
-    /// the same tenant on the same node.  This is a soft constraint: the context will never
-    /// cause us to fail to schedule a shard.
-    pub(crate) fn schedule_shard(
-        &self,
-        hard_exclude: &[NodeId],
-        context: &ScheduleContext,
-    ) -> Result<NodeId, ScheduleError> {
-        if self.nodes.is_empty() {
-            return Err(ScheduleError::NoPageservers);
-        }
-
-        let mut scores: Vec<(NodeId, AffinityScore, usize)> = self
-            .nodes
-            .iter()
-            .filter_map(|(k, v)| {
-                if hard_exclude.contains(k) || v.may_schedule == MaySchedule::No {
-                    None
-                } else {
-                    Some((
-                        *k,
-                        context.nodes.get(k).copied().unwrap_or(AffinityScore::FREE),
-                        v.shard_count,
-                    ))
-                }
-            })
-            .collect();
-
-        // Sort by, in order of precedence:
-        //  1st: Affinity score.  We should never pick a higher-score node if a lower-score node is available
-        //  2nd: Utilization.  Within nodes with the same affinity, use the least loaded nodes.
-        //  3rd: Node ID.  This is a convenience to make selection deterministic in tests and empty systems.
-        scores.sort_by_key(|i| (i.1, i.2, i.0));
-
-        if scores.is_empty() {
-            // After applying constraints, no pageservers were left.  We log some detail about
-            // the state of nodes to help understand why this happened.  This is not logged as an error because
-            // it is legitimately possible for enough nodes to be Offline to prevent scheduling a shard.
-            tracing::info!("Scheduling failure, while excluding {hard_exclude:?}, node states:");
-            for (node_id, node) in &self.nodes {
-                tracing::info!(
-                    "Node {node_id}: may_schedule={} shards={}",
-                    node.may_schedule != MaySchedule::No,
-                    node.shard_count
-                );
-            }
-
-            return Err(ScheduleError::ImpossibleConstraint);
-        }
-
-        // Lowest score wins
-        let node_id = scores.first().unwrap().0;
-        tracing::info!(
-            "scheduler selected node {node_id} (elegible nodes {:?}, hard exclude: {hard_exclude:?}, soft exclude: {context:?})",
-            scores.iter().map(|i| i.0 .0).collect::<Vec<_>>()
-        );
-
-        // Note that we do not update shard count here to reflect the scheduling: that
-        // is IntentState's job when the scheduled location is used.
-
-        Ok(node_id)
-    }
-
-    /// Unit test access to internal state
-    #[cfg(test)]
-    pub(crate) fn get_node_shard_count(&self, node_id: NodeId) -> usize {
-        self.nodes.get(&node_id).unwrap().shard_count
-    }
-}
-
-#[cfg(test)]
-pub(crate) mod test_utils {
-
-    use crate::node::Node;
-    use pageserver_api::controller_api::{NodeAvailability, UtilizationScore};
-    use std::collections::HashMap;
-    use utils::id::NodeId;
-    /// Test helper: synthesize the requested number of nodes, all in active state.
-    ///
-    /// Node IDs start at one.
-    pub(crate) fn make_test_nodes(n: u64) -> HashMap<NodeId, Node> {
-        (1..n + 1)
-            .map(|i| {
-                (NodeId(i), {
-                    let mut node = Node::new(
-                        NodeId(i),
-                        format!("httphost-{i}"),
-                        80 + i as u16,
-                        format!("pghost-{i}"),
-                        5432 + i as u16,
-                    );
-                    node.set_availability(NodeAvailability::Active(UtilizationScore::worst()));
-                    assert!(node.is_available());
-                    node
-                })
-            })
-            .collect()
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    use crate::tenant_state::IntentState;
-    #[test]
-    fn scheduler_basic() -> anyhow::Result<()> {
-        let nodes = test_utils::make_test_nodes(2);
-
-        let mut scheduler = Scheduler::new(nodes.values());
-        let mut t1_intent = IntentState::new();
-        let mut t2_intent = IntentState::new();
-
-        let context = ScheduleContext::default();
-
-        let scheduled = scheduler.schedule_shard(&[], &context)?;
-        t1_intent.set_attached(&mut scheduler, Some(scheduled));
-        let scheduled = scheduler.schedule_shard(&[], &context)?;
-        t2_intent.set_attached(&mut scheduler, Some(scheduled));
-
-        assert_eq!(scheduler.nodes.get(&NodeId(1)).unwrap().shard_count, 1);
-        assert_eq!(scheduler.nodes.get(&NodeId(2)).unwrap().shard_count, 1);
-
-        let scheduled = scheduler.schedule_shard(&t1_intent.all_pageservers(), &context)?;
-        t1_intent.push_secondary(&mut scheduler, scheduled);
-
-        assert_eq!(scheduler.nodes.get(&NodeId(1)).unwrap().shard_count, 1);
-        assert_eq!(scheduler.nodes.get(&NodeId(2)).unwrap().shard_count, 2);
-
-        t1_intent.clear(&mut scheduler);
-        assert_eq!(scheduler.nodes.get(&NodeId(1)).unwrap().shard_count, 0);
-        assert_eq!(scheduler.nodes.get(&NodeId(2)).unwrap().shard_count, 1);
-
-        if cfg!(debug_assertions) {
-            // Dropping an IntentState without clearing it causes a panic in debug mode,
-            // because we have failed to properly update scheduler shard counts.
-            let result = std::panic::catch_unwind(move || {
-                drop(t2_intent);
-            });
-            assert!(result.is_err());
-        } else {
-            t2_intent.clear(&mut scheduler);
-            assert_eq!(scheduler.nodes.get(&NodeId(1)).unwrap().shard_count, 0);
-            assert_eq!(scheduler.nodes.get(&NodeId(2)).unwrap().shard_count, 0);
-        }
-
-        Ok(())
-    }
-}

control_plane/attachment_service/src/schema.rs

@@ -1,29 +0,0 @@
-// @generated automatically by Diesel CLI.
-
-diesel::table! {
-    nodes (node_id) {
-        node_id -> Int8,
-        scheduling_policy -> Varchar,
-        listen_http_addr -> Varchar,
-        listen_http_port -> Int4,
-        listen_pg_addr -> Varchar,
-        listen_pg_port -> Int4,
-    }
-}
-
-diesel::table! {
-    tenant_shards (tenant_id, shard_number, shard_count) {
-        tenant_id -> Varchar,
-        shard_number -> Int4,
-        shard_count -> Int4,
-        shard_stripe_size -> Int4,
-        generation -> Nullable<Int4>,
-        generation_pageserver -> Nullable<Int8>,
-        placement_policy -> Varchar,
-        splitting -> Int2,
-        config -> Text,
-        scheduling_policy -> Varchar,
-    }
-}
-
-diesel::allow_tables_to_appear_in_same_query!(nodes, tenant_shards,);

control_plane/src/attachment_service.rs

@@ -0,0 +1,107 @@
+use crate::{background_process, local_env::LocalEnv};
+use anyhow::anyhow;
+use camino::Utf8PathBuf;
+use serde::{Deserialize, Serialize};
+use serde_with::{serde_as, DisplayFromStr};
+use std::{path::PathBuf, process::Child};
+use utils::id::{NodeId, TenantId};
+
+pub struct AttachmentService {
+    env: LocalEnv,
+    listen: String,
+    path: PathBuf,
+}
+
+const COMMAND: &str = "attachment_service";
+
+#[serde_as]
+#[derive(Serialize, Deserialize)]
+pub struct AttachHookRequest {
+    #[serde_as(as = "DisplayFromStr")]
+    pub tenant_id: TenantId,
+    pub pageserver_id: Option<NodeId>,
+}
+
+#[derive(Serialize, Deserialize)]
+pub struct AttachHookResponse {
+    pub gen: Option<u32>,
+}
+
+impl AttachmentService {
+    pub fn from_env(env: &LocalEnv) -> Self {
+        let path = env.base_data_dir.join("attachments.json");
+
+        // Makes no sense to construct this if pageservers aren't going to use it: assume
+        // pageservers have control plane API set
+        let listen_url = env.control_plane_api.clone().unwrap();
+
+        let listen = format!(
+            "{}:{}",
+            listen_url.host_str().unwrap(),
+            listen_url.port().unwrap()
+        );
+
+        Self {
+            env: env.clone(),
+            path,
+            listen,
+        }
+    }
+
+    fn pid_file(&self) -> Utf8PathBuf {
+        Utf8PathBuf::from_path_buf(self.env.base_data_dir.join("attachment_service.pid"))
+            .expect("non-Unicode path")
+    }
+
+    pub fn start(&self) -> anyhow::Result<Child> {
+        let path_str = self.path.to_string_lossy();
+
+        background_process::start_process(
+            COMMAND,
+            &self.env.base_data_dir,
+            &self.env.attachment_service_bin(),
+            ["-l", &self.listen, "-p", &path_str],
+            [],
+            background_process::InitialPidFile::Create(&self.pid_file()),
+            // TODO: a real status check
+            || Ok(true),
+        )
+    }
+
+    pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
+        background_process::stop_process(immediate, COMMAND, &self.pid_file())
+    }
+
+    /// Call into the attach_hook API, for use before handing out attachments to pageservers
+    pub fn attach_hook(
+        &self,
+        tenant_id: TenantId,
+        pageserver_id: NodeId,
+    ) -> anyhow::Result<Option<u32>> {
+        use hyper::StatusCode;
+
+        let url = self
+            .env
+            .control_plane_api
+            .clone()
+            .unwrap()
+            .join("attach_hook")
+            .unwrap();
+        let client = reqwest::blocking::ClientBuilder::new()
+            .build()
+            .expect("Failed to construct http client");
+
+        let request = AttachHookRequest {
+            tenant_id,
+            pageserver_id: Some(pageserver_id),
+        };
+
+        let response = client.post(url).json(&request).send()?;
+        if response.status() != StatusCode::OK {
+            return Err(anyhow!("Unexpected status {}", response.status()));
+        }
+
+        let response = response.json::<AttachHookResponse>()?;
+        Ok(response.gen)
+    }
+}

control_plane/src/background_process.rs

@@ -17,7 +17,7 @@ use std::io::Write;
 use std::os::unix::prelude::AsRawFd;
 use std::os::unix::process::CommandExt;
 use std::path::Path;
-use std::process::Command;
+use std::process::{Child, Command};
 use std::time::Duration;
 use std::{fs, io, thread};
 
@@ -44,15 +44,15 @@ const NOTICE_AFTER_RETRIES: u64 = 50;
 
 /// Argument to `start_process`, to indicate whether it should create pidfile or if the process creates
 /// it itself.
-pub enum InitialPidFile {
+pub enum InitialPidFile<'t> {
     /// Create a pidfile, to allow future CLI invocations to manipulate the process.
-    Create(Utf8PathBuf),
+    Create(&'t Utf8Path),
     /// The process will create the pidfile itself, need to wait for that event.
-    Expect(Utf8PathBuf),
+    Expect(&'t Utf8Path),
 }
 
 /// Start a background child process using the parameters given.
-pub async fn start_process<F, Fut, AI, A, EI>(
+pub fn start_process<F, AI, A, EI>(
     process_name: &str,
     datadir: &Path,
     command: &Path,
@@ -60,10 +60,9 @@ pub async fn start_process<F, Fut, AI, A, EI>(
     envs: EI,
     initial_pid_file: InitialPidFile,
     process_status_check: F,
-) -> anyhow::Result<()>
+) -> anyhow::Result<Child>
 where
-    F: Fn() -> Fut,
-    Fut: std::future::Future<Output = anyhow::Result<bool>>,
+    F: Fn() -> anyhow::Result<bool>,
     AI: IntoIterator<Item = A>,
     A: AsRef<OsStr>,
     // Not generic AsRef<OsStr>, otherwise empty `envs` prevents type inference
@@ -72,6 +71,7 @@ where
     let log_path = datadir.join(format!("{process_name}.log"));
     let process_log_file = fs::OpenOptions::new()
         .create(true)
+        .write(true)
         .append(true)
         .open(&log_path)
         .with_context(|| {
@@ -89,7 +89,7 @@ where
     let filled_cmd = fill_remote_storage_secrets_vars(fill_rust_env_vars(background_command));
     filled_cmd.envs(envs);
 
-    let pid_file_to_check = match &initial_pid_file {
+    let pid_file_to_check = match initial_pid_file {
         InitialPidFile::Create(path) => {
             pre_exec_create_pidfile(filled_cmd, path);
             path
@@ -97,7 +97,7 @@ where
         InitialPidFile::Expect(path) => path,
     };
 
-    let spawned_process = filled_cmd.spawn().with_context(|| {
+    let mut spawned_process = filled_cmd.spawn().with_context(|| {
         format!("Could not spawn {process_name}, see console output and log files for details.")
     })?;
     let pid = spawned_process.id();
@@ -105,26 +105,12 @@ where
         i32::try_from(pid)
             .with_context(|| format!("Subprocess {process_name} has invalid pid {pid}"))?,
     );
-    // set up a scopeguard to kill & wait for the child in case we panic or bail below
-    let spawned_process = scopeguard::guard(spawned_process, |mut spawned_process| {
-        println!("SIGKILL & wait the started process");
-        (|| {
-            // TODO: use another signal that can be caught by the child so it can clean up any children it spawned (e..g, walredo).
-            spawned_process.kill().context("SIGKILL child")?;
-            spawned_process.wait().context("wait() for child process")?;
-            anyhow::Ok(())
-        })()
-        .with_context(|| format!("scopeguard kill&wait child {process_name:?}"))
-        .unwrap();
-    });
 
     for retries in 0..RETRIES {
-        match process_started(pid, pid_file_to_check, &process_status_check).await {
+        match process_started(pid, Some(pid_file_to_check), &process_status_check) {
             Ok(true) => {
-                println!("\n{process_name} started and passed status check, pid: {pid}");
-                // leak the child process, it'll outlive this neon_local invocation
-                drop(scopeguard::ScopeGuard::into_inner(spawned_process));
-                return Ok(());
+                println!("\n{process_name} started, pid: {pid}");
+                return Ok(spawned_process);
             }
             Ok(false) => {
                 if retries == NOTICE_AFTER_RETRIES {
@@ -139,15 +125,16 @@ where
                 thread::sleep(Duration::from_millis(RETRY_INTERVAL_MILLIS));
             }
             Err(e) => {
-                println!("error starting process {process_name:?}: {e:#}");
+                println!("{process_name} failed to start: {e:#}");
+                if let Err(e) = spawned_process.kill() {
+                    println!("Could not stop {process_name} subprocess: {e:#}")
+                };
                 return Err(e);
             }
         }
     }
     println!();
-    anyhow::bail!(
-        "{process_name} did not start+pass status checks within {RETRY_UNTIL_SECS} seconds"
-    );
+    anyhow::bail!("{process_name} did not start in {RETRY_UNTIL_SECS} seconds");
 }
 
 /// Stops the process, using the pid file given. Returns Ok also if the process is already not running.
@@ -255,9 +242,7 @@ fn fill_remote_storage_secrets_vars(mut cmd: &mut Command) -> &mut Command {
     for env_key in [
         "AWS_ACCESS_KEY_ID",
         "AWS_SECRET_ACCESS_KEY",
-        "AWS_PROFILE",
-        // HOME is needed in combination with `AWS_PROFILE` to pick up the SSO sessions.
-        "HOME",
+        "AWS_SESSION_TOKEN",
         "AZURE_STORAGE_ACCOUNT",
         "AZURE_STORAGE_ACCESS_KEY",
     ] {
@@ -277,7 +262,7 @@ where
     P: Into<Utf8PathBuf>,
 {
     let path: Utf8PathBuf = path.into();
-    // SAFETY:
+    // SAFETY
     // pre_exec is marked unsafe because it runs between fork and exec.
     // Why is that dangerous in various ways?
     // Long answer:  https://github.com/rust-lang/rust/issues/39575
@@ -294,7 +279,7 @@ where
     //      is in state 'taken' but the thread that would unlock it is
     //      not there.
     //   2. A rust object that represented some external resource in the
-    //      parent now got implicitly copied by the fork, even though
+    //      parent now got implicitly copied by the the fork, even though
     //      the object's type is not `Copy`. The parent program may use
     //      non-copyability as way to enforce unique ownership of an
     //      external resource in the typesystem. The fork breaks that
@@ -331,20 +316,22 @@ where
     cmd
 }
 
-async fn process_started<F, Fut>(
+fn process_started<F>(
     pid: Pid,
-    pid_file_to_check: &Utf8Path,
+    pid_file_to_check: Option<&Utf8Path>,
     status_check: &F,
 ) -> anyhow::Result<bool>
 where
-    F: Fn() -> Fut,
-    Fut: std::future::Future<Output = anyhow::Result<bool>>,
+    F: Fn() -> anyhow::Result<bool>,
 {
-    match status_check().await {
-        Ok(true) => match pid_file::read(pid_file_to_check)? {
-            PidFileRead::NotExist => Ok(false),
-            PidFileRead::LockedByOtherProcess(pid_in_file) => Ok(pid_in_file == pid),
-            PidFileRead::NotHeldByAnyProcess(_) => Ok(false),
+    match status_check() {
+        Ok(true) => match pid_file_to_check {
+            Some(pid_file_path) => match pid_file::read(pid_file_path)? {
+                PidFileRead::NotExist => Ok(false),
+                PidFileRead::LockedByOtherProcess(pid_in_file) => Ok(pid_in_file == pid),
+                PidFileRead::NotHeldByAnyProcess(_) => Ok(false),
+            },
+            None => Ok(true),
         },
         Ok(false) => Ok(false),
         Err(e) => anyhow::bail!("process failed to start: {e}"),

control_plane/src/bin/attachment_service.rs

@@ -0,0 +1,284 @@
+/// The attachment service mimics the aspects of the control plane API
+/// that are required for a pageserver to operate.
+///
+/// This enables running & testing pageservers without a full-blown
+/// deployment of the Neon cloud platform.
+///
+use anyhow::anyhow;
+use clap::Parser;
+use hex::FromHex;
+use hyper::StatusCode;
+use hyper::{Body, Request, Response};
+use serde::{Deserialize, Serialize};
+use std::path::{Path, PathBuf};
+use std::{collections::HashMap, sync::Arc};
+use utils::logging::{self, LogFormat};
+use utils::signals::{ShutdownSignals, Signal};
+
+use utils::{
+    http::{
+        endpoint::{self},
+        error::ApiError,
+        json::{json_request, json_response},
+        RequestExt, RouterBuilder,
+    },
+    id::{NodeId, TenantId},
+    tcp_listener,
+};
+
+use pageserver_api::control_api::{
+    ReAttachRequest, ReAttachResponse, ReAttachResponseTenant, ValidateRequest, ValidateResponse,
+    ValidateResponseTenant,
+};
+
+use control_plane::attachment_service::{AttachHookRequest, AttachHookResponse};
+
+#[derive(Parser)]
+#[command(author, version, about, long_about = None)]
+#[command(arg_required_else_help(true))]
+struct Cli {
+    /// Host and port to listen on, like `127.0.0.1:1234`
+    #[arg(short, long)]
+    listen: std::net::SocketAddr,
+
+    /// Path to the .json file to store state (will be created if it doesn't exist)
+    #[arg(short, long)]
+    path: PathBuf,
+}
+
+// The persistent state of each Tenant
+#[derive(Serialize, Deserialize, Clone)]
+struct TenantState {
+    // Currently attached pageserver
+    pageserver: Option<NodeId>,
+
+    // Latest generation number: next time we attach, increment this
+    // and use the incremented number when attaching
+    generation: u32,
+}
+
+fn to_hex_map<S, V>(input: &HashMap<TenantId, V>, serializer: S) -> Result<S::Ok, S::Error>
+where
+    S: serde::Serializer,
+    V: Clone + Serialize,
+{
+    let transformed = input.iter().map(|(k, v)| (hex::encode(k), v.clone()));
+
+    transformed
+        .collect::<HashMap<String, V>>()
+        .serialize(serializer)
+}
+
+fn from_hex_map<'de, D, V>(deserializer: D) -> Result<HashMap<TenantId, V>, D::Error>
+where
+    D: serde::de::Deserializer<'de>,
+    V: Deserialize<'de>,
+{
+    let hex_map = HashMap::<String, V>::deserialize(deserializer)?;
+    hex_map
+        .into_iter()
+        .map(|(k, v)| {
+            TenantId::from_hex(k)
+                .map(|k| (k, v))
+                .map_err(serde::de::Error::custom)
+        })
+        .collect()
+}
+
+// Top level state available to all HTTP handlers
+#[derive(Serialize, Deserialize)]
+struct PersistentState {
+    #[serde(serialize_with = "to_hex_map", deserialize_with = "from_hex_map")]
+    tenants: HashMap<TenantId, TenantState>,
+
+    #[serde(skip)]
+    path: PathBuf,
+}
+
+impl PersistentState {
+    async fn save(&self) -> anyhow::Result<()> {
+        let bytes = serde_json::to_vec(self)?;
+        tokio::fs::write(&self.path, &bytes).await?;
+
+        Ok(())
+    }
+
+    async fn load(path: &Path) -> anyhow::Result<Self> {
+        let bytes = tokio::fs::read(path).await?;
+        let mut decoded = serde_json::from_slice::<Self>(&bytes)?;
+        decoded.path = path.to_owned();
+        Ok(decoded)
+    }
+
+    async fn load_or_new(path: &Path) -> Self {
+        match Self::load(path).await {
+            Ok(s) => {
+                tracing::info!("Loaded state file at {}", path.display());
+                s
+            }
+            Err(e)
+                if e.downcast_ref::<std::io::Error>()
+                    .map(|e| e.kind() == std::io::ErrorKind::NotFound)
+                    .unwrap_or(false) =>
+            {
+                tracing::info!("Will create state file at {}", path.display());
+                Self {
+                    tenants: HashMap::new(),
+                    path: path.to_owned(),
+                }
+            }
+            Err(e) => {
+                panic!("Failed to load state from '{}': {e:#} (maybe your .neon/ dir was written by an older version?)", path.display())
+            }
+        }
+    }
+}
+
+/// State available to HTTP request handlers
+#[derive(Clone)]
+struct State {
+    inner: Arc<tokio::sync::RwLock<PersistentState>>,
+}
+
+impl State {
+    fn new(persistent_state: PersistentState) -> State {
+        Self {
+            inner: Arc::new(tokio::sync::RwLock::new(persistent_state)),
+        }
+    }
+}
+
+#[inline(always)]
+fn get_state(request: &Request<Body>) -> &State {
+    request
+        .data::<Arc<State>>()
+        .expect("unknown state type")
+        .as_ref()
+}
+
+/// Pageserver calls into this on startup, to learn which tenants it should attach
+async fn handle_re_attach(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
+    let reattach_req = json_request::<ReAttachRequest>(&mut req).await?;
+
+    let state = get_state(&req).inner.clone();
+    let mut locked = state.write().await;
+
+    let mut response = ReAttachResponse {
+        tenants: Vec::new(),
+    };
+    for (t, state) in &mut locked.tenants {
+        if state.pageserver == Some(reattach_req.node_id) {
+            state.generation += 1;
+            response.tenants.push(ReAttachResponseTenant {
+                id: *t,
+                generation: state.generation,
+            });
+        }
+    }
+
+    locked.save().await.map_err(ApiError::InternalServerError)?;
+
+    json_response(StatusCode::OK, response)
+}
+
+/// Pageserver calls into this before doing deletions, to confirm that it still
+/// holds the latest generation for the tenants with deletions enqueued
+async fn handle_validate(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
+    let validate_req = json_request::<ValidateRequest>(&mut req).await?;
+
+    let locked = get_state(&req).inner.read().await;
+
+    let mut response = ValidateResponse {
+        tenants: Vec::new(),
+    };
+
+    for req_tenant in validate_req.tenants {
+        if let Some(tenant_state) = locked.tenants.get(&req_tenant.id) {
+            let valid = tenant_state.generation == req_tenant.gen;
+            response.tenants.push(ValidateResponseTenant {
+                id: req_tenant.id,
+                valid,
+            });
+        }
+    }
+
+    json_response(StatusCode::OK, response)
+}
+/// Call into this before attaching a tenant to a pageserver, to acquire a generation number
+/// (in the real control plane this is unnecessary, because the same program is managing
+///  generation numbers and doing attachments).
+async fn handle_attach_hook(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
+    let attach_req = json_request::<AttachHookRequest>(&mut req).await?;
+
+    let state = get_state(&req).inner.clone();
+    let mut locked = state.write().await;
+
+    let tenant_state = locked
+        .tenants
+        .entry(attach_req.tenant_id)
+        .or_insert_with(|| TenantState {
+            pageserver: attach_req.pageserver_id,
+            generation: 0,
+        });
+
+    if attach_req.pageserver_id.is_some() {
+        tenant_state.generation += 1;
+    }
+    tenant_state.pageserver = attach_req.pageserver_id;
+    let generation = tenant_state.generation;
+
+    locked.save().await.map_err(ApiError::InternalServerError)?;
+
+    json_response(
+        StatusCode::OK,
+        AttachHookResponse {
+            gen: attach_req.pageserver_id.map(|_| generation),
+        },
+    )
+}
+
+fn make_router(persistent_state: PersistentState) -> RouterBuilder<hyper::Body, ApiError> {
+    endpoint::make_router()
+        .data(Arc::new(State::new(persistent_state)))
+        .post("/re-attach", handle_re_attach)
+        .post("/validate", handle_validate)
+        .post("/attach_hook", handle_attach_hook)
+}
+
+#[tokio::main]
+async fn main() -> anyhow::Result<()> {
+    logging::init(
+        LogFormat::Plain,
+        logging::TracingErrorLayerEnablement::Disabled,
+    )?;
+
+    let args = Cli::parse();
+    tracing::info!(
+        "Starting, state at {}, listening on {}",
+        args.path.to_string_lossy(),
+        args.listen
+    );
+
+    let persistent_state = PersistentState::load_or_new(&args.path).await;
+
+    let http_listener = tcp_listener::bind(args.listen)?;
+    let router = make_router(persistent_state)
+        .build()
+        .map_err(|err| anyhow!(err))?;
+    let service = utils::http::RouterService::new(router).unwrap();
+    let server = hyper::Server::from_tcp(http_listener)?.serve(service);
+
+    tracing::info!("Serving on {0}", args.listen);
+
+    tokio::task::spawn(server);
+
+    ShutdownSignals::handle(|signal| match signal {
+        Signal::Interrupt | Signal::Terminate | Signal::Quit => {
+            tracing::info!("Got {}. Terminating", signal.name());
+            // We're just a test helper: no graceful shutdown.
+            std::process::exit(0);
+        }
+    })?;
+
+    Ok(())
+}

control_plane/src/broker.rs

@@ -11,7 +11,7 @@ use camino::Utf8PathBuf;
 
 use crate::{background_process, local_env};
 
-pub async fn start_broker_process(env: &local_env::LocalEnv) -> anyhow::Result<()> {
+pub fn start_broker_process(env: &local_env::LocalEnv) -> anyhow::Result<()> {
     let broker = &env.broker;
     let listen_addr = &broker.listen_addr;
 
@@ -19,15 +19,15 @@ pub async fn start_broker_process(env: &local_env::LocalEnv) -> anyhow::Result<(
 
     let args = [format!("--listen-addr={listen_addr}")];
 
-    let client = reqwest::Client::new();
+    let client = reqwest::blocking::Client::new();
     background_process::start_process(
         "storage_broker",
         &env.base_data_dir,
         &env.storage_broker_bin(),
         args,
         [],
-        background_process::InitialPidFile::Create(storage_broker_pid_file_path(env)),
-        || async {
+        background_process::InitialPidFile::Create(&storage_broker_pid_file_path(env)),
+        || {
             let url = broker.client_url();
             let status_url = url.join("status").with_context(|| {
                 format!("Failed to append /status path to broker endpoint {url}")
@@ -36,13 +36,12 @@ pub async fn start_broker_process(env: &local_env::LocalEnv) -> anyhow::Result<(
                 .get(status_url)
                 .build()
                 .with_context(|| format!("Failed to construct request to broker endpoint {url}"))?;
-            match client.execute(request).await {
+            match client.execute(request) {
                 Ok(resp) => Ok(resp.status().is_success()),
                 Err(_) => Ok(false),
             }
         },
     )
-    .await
     .context("Failed to spawn storage_broker subprocess")?;
     Ok(())
 }

control_plane/src/endpoint.rs

@@ -12,7 +12,7 @@
 //!
 //! The endpoint is managed by the `compute_ctl` binary. When an endpoint is
 //! started, we launch `compute_ctl` It synchronizes the safekeepers, downloads
-//! the basebackup from the pageserver to initialize the data directory, and
+//! the basebackup from the pageserver to initialize the the data directory, and
 //! finally launches the PostgreSQL process. It watches the PostgreSQL process
 //! until it exits.
 //!
@@ -41,41 +41,36 @@ use std::net::SocketAddr;
 use std::net::TcpStream;
 use std::path::PathBuf;
 use std::process::Command;
-use std::str::FromStr;
 use std::sync::Arc;
 use std::time::Duration;
 
 use anyhow::{anyhow, bail, Context, Result};
-use compute_api::spec::Database;
-use compute_api::spec::PgIdent;
-use compute_api::spec::RemoteExtSpec;
-use compute_api::spec::Role;
-use nix::sys::signal::kill;
-use nix::sys::signal::Signal;
-use pageserver_api::shard::ShardStripeSize;
 use serde::{Deserialize, Serialize};
-use url::Host;
+use serde_with::{serde_as, DisplayFromStr};
 use utils::id::{NodeId, TenantId, TimelineId};
 
 use crate::local_env::LocalEnv;
+use crate::pageserver::PageServerNode;
 use crate::postgresql_conf::PostgresConf;
-use crate::storage_controller::StorageController;
 
 use compute_api::responses::{ComputeState, ComputeStatus};
-use compute_api::spec::{Cluster, ComputeFeature, ComputeMode, ComputeSpec};
+use compute_api::spec::{Cluster, ComputeMode, ComputeSpec};
 
 // contents of a endpoint.json file
+#[serde_as]
 #[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
 pub struct EndpointConf {
     endpoint_id: String,
+    #[serde_as(as = "DisplayFromStr")]
     tenant_id: TenantId,
+    #[serde_as(as = "DisplayFromStr")]
     timeline_id: TimelineId,
     mode: ComputeMode,
     pg_port: u16,
     http_port: u16,
     pg_version: u32,
     skip_pg_catalog_updates: bool,
-    features: Vec<ComputeFeature>,
+    pageserver_id: NodeId,
 }
 
 //
@@ -127,15 +122,18 @@ impl ComputeControlPlane {
         http_port: Option<u16>,
         pg_version: u32,
         mode: ComputeMode,
-        skip_pg_catalog_updates: bool,
+        pageserver_id: NodeId,
     ) -> Result<Arc<Endpoint>> {
         let pg_port = pg_port.unwrap_or_else(|| self.get_port());
         let http_port = http_port.unwrap_or_else(|| self.get_port() + 1);
+        let pageserver =
+            PageServerNode::from_env(&self.env, self.env.get_pageserver_conf(pageserver_id)?);
         let ep = Arc::new(Endpoint {
             endpoint_id: endpoint_id.to_owned(),
             pg_address: SocketAddr::new("127.0.0.1".parse().unwrap(), pg_port),
             http_address: SocketAddr::new("127.0.0.1".parse().unwrap(), http_port),
             env: self.env.clone(),
+            pageserver,
             timeline_id,
             mode,
             tenant_id,
@@ -146,8 +144,7 @@ impl ComputeControlPlane {
             // before and after start are the same. So, skip catalog updates,
             // with this we basically test a case of waking up an idle compute, where
             // we also skip catalog updates in the cloud.
-            skip_pg_catalog_updates,
-            features: vec![],
+            skip_pg_catalog_updates: true,
         });
 
         ep.create_endpoint_dir()?;
@@ -161,8 +158,8 @@ impl ComputeControlPlane {
                 http_port,
                 pg_port,
                 pg_version,
-                skip_pg_catalog_updates,
-                features: vec![],
+                skip_pg_catalog_updates: true,
+                pageserver_id,
             })?,
         )?;
         std::fs::write(
@@ -175,30 +172,6 @@ impl ComputeControlPlane {
 
         Ok(ep)
     }
-
-    pub fn check_conflicting_endpoints(
-        &self,
-        mode: ComputeMode,
-        tenant_id: TenantId,
-        timeline_id: TimelineId,
-    ) -> Result<()> {
-        if matches!(mode, ComputeMode::Primary) {
-            // this check is not complete, as you could have a concurrent attempt at
-            // creating another primary, both reading the state before checking it here,
-            // but it's better than nothing.
-            let mut duplicates = self.endpoints.iter().filter(|(_k, v)| {
-                v.tenant_id == tenant_id
-                    && v.timeline_id == timeline_id
-                    && v.mode == mode
-                    && v.status() != EndpointStatus::Stopped
-            });
-
-            if let Some((key, _)) = duplicates.next() {
-                bail!("attempting to create a duplicate primary endpoint on tenant {tenant_id}, timeline {timeline_id}: endpoint {key:?} exists already. please don't do this, it is not supported.");
-            }
-        }
-        Ok(())
-    }
 }
 
 ///////////////////////////////////////////////////////////////////////////////
@@ -221,32 +194,10 @@ pub struct Endpoint {
     // These are not part of the endpoint as such, but the environment
     // the endpoint runs in.
     pub env: LocalEnv,
+    pageserver: PageServerNode,
 
     // Optimizations
     skip_pg_catalog_updates: bool,
-
-    // Feature flags
-    features: Vec<ComputeFeature>,
-}
-
-#[derive(PartialEq, Eq)]
-pub enum EndpointStatus {
-    Running,
-    Stopped,
-    Crashed,
-    RunningNoPidfile,
-}
-
-impl std::fmt::Display for EndpointStatus {
-    fn fmt(&self, writer: &mut std::fmt::Formatter) -> std::fmt::Result {
-        let s = match self {
-            Self::Running => "running",
-            Self::Stopped => "stopped",
-            Self::Crashed => "crashed",
-            Self::RunningNoPidfile => "running, no pidfile",
-        };
-        write!(writer, "{}", s)
-    }
 }
 
 impl Endpoint {
@@ -266,17 +217,20 @@ impl Endpoint {
         let conf: EndpointConf =
             serde_json::from_slice(&std::fs::read(entry.path().join("endpoint.json"))?)?;
 
+        let pageserver =
+            PageServerNode::from_env(env, env.get_pageserver_conf(conf.pageserver_id)?);
+
         Ok(Endpoint {
             pg_address: SocketAddr::new("127.0.0.1".parse().unwrap(), conf.pg_port),
             http_address: SocketAddr::new("127.0.0.1".parse().unwrap(), conf.http_port),
             endpoint_id,
             env: env.clone(),
+            pageserver,
             timeline_id: conf.timeline_id,
             mode: conf.mode,
             tenant_id: conf.tenant_id,
             pg_version: conf.pg_version,
             skip_pg_catalog_updates: conf.skip_pg_catalog_updates,
-            features: conf.features,
         })
     }
 
@@ -406,16 +360,16 @@ impl Endpoint {
         self.endpoint_path().join("pgdata")
     }
 
-    pub fn status(&self) -> EndpointStatus {
+    pub fn status(&self) -> &str {
         let timeout = Duration::from_millis(300);
         let has_pidfile = self.pgdata().join("postmaster.pid").exists();
         let can_connect = TcpStream::connect_timeout(&self.pg_address, timeout).is_ok();
 
         match (has_pidfile, can_connect) {
-            (true, true) => EndpointStatus::Running,
-            (false, false) => EndpointStatus::Stopped,
-            (true, false) => EndpointStatus::Crashed,
-            (false, true) => EndpointStatus::RunningNoPidfile,
+            (true, true) => "running",
+            (false, false) => "stopped",
+            (true, false) => "crashed",
+            (false, true) => "running, no pidfile",
         }
     }
 
@@ -460,59 +414,43 @@ impl Endpoint {
             );
         }
 
-        Ok(())
-    }
-
-    fn wait_for_compute_ctl_to_exit(&self, send_sigterm: bool) -> Result<()> {
-        // TODO use background_process::stop_process instead: https://github.com/neondatabase/neon/pull/6482
+        // Also wait for the compute_ctl process to die. It might have some cleanup
+        // work to do after postgres stops, like syncing safekeepers, etc.
+        //
+        // TODO use background_process::stop_process instead
         let pidfile_path = self.endpoint_path().join("compute_ctl.pid");
         let pid: u32 = std::fs::read_to_string(pidfile_path)?.parse()?;
         let pid = nix::unistd::Pid::from_raw(pid as i32);
-        if send_sigterm {
-            kill(pid, Signal::SIGTERM).ok();
-        }
         crate::background_process::wait_until_stopped("compute_ctl", pid)?;
+
         Ok(())
     }
 
-    fn read_postgresql_conf(&self) -> Result<String> {
+    pub fn start(
+        &self,
+        auth_token: &Option<String>,
+        safekeepers: Vec<NodeId>,
+        remote_ext_config: Option<&String>,
+    ) -> Result<()> {
+        if self.status() == "running" {
+            anyhow::bail!("The endpoint is already running");
+        }
+
         // Slurp the endpoints/<endpoint id>/postgresql.conf file into
         // memory. We will include it in the spec file that we pass to
         // `compute_ctl`, and `compute_ctl` will write it to the postgresql.conf
         // in the data directory.
         let postgresql_conf_path = self.endpoint_path().join("postgresql.conf");
-        match std::fs::read(&postgresql_conf_path) {
-            Ok(content) => Ok(String::from_utf8(content)?),
-            Err(e) if e.kind() == std::io::ErrorKind::NotFound => Ok("".to_string()),
-            Err(e) => Err(anyhow::Error::new(e).context(format!(
-                "failed to read config file in {}",
-                postgresql_conf_path.to_str().unwrap()
-            ))),
-        }
-    }
-
-    fn build_pageserver_connstr(pageservers: &[(Host, u16)]) -> String {
-        pageservers
-            .iter()
-            .map(|(host, port)| format!("postgresql://no_user@{host}:{port}"))
-            .collect::<Vec<_>>()
-            .join(",")
-    }
-
-    pub async fn start(
-        &self,
-        auth_token: &Option<String>,
-        safekeepers: Vec<NodeId>,
-        pageservers: Vec<(Host, u16)>,
-        remote_ext_config: Option<&String>,
-        shard_stripe_size: usize,
-        create_test_user: bool,
-    ) -> Result<()> {
-        if self.status() == EndpointStatus::Running {
-            anyhow::bail!("The endpoint is already running");
-        }
-
-        let postgresql_conf = self.read_postgresql_conf()?;
+        let postgresql_conf = match std::fs::read(&postgresql_conf_path) {
+            Ok(content) => String::from_utf8(content)?,
+            Err(e) if e.kind() == std::io::ErrorKind::NotFound => "".to_string(),
+            Err(e) => {
+                return Err(anyhow::Error::new(e).context(format!(
+                    "failed to read config file in {}",
+                    postgresql_conf_path.to_str().unwrap()
+                )))
+            }
+        };
 
         // We always start the compute node from scratch, so if the Postgres
         // data dir exists from a previous launch, remove it first.
@@ -520,9 +458,13 @@ impl Endpoint {
             std::fs::remove_dir_all(self.pgdata())?;
         }
 
-        let pageserver_connstring = Self::build_pageserver_connstr(&pageservers);
-        assert!(!pageserver_connstring.is_empty());
+        let pageserver_connstring = {
+            let config = &self.pageserver.pg_connection_config;
+            let (host, port) = (config.host(), config.port());
 
+            // NOTE: avoid spaces in connection string, because it is less error prone if we forward it somewhere.
+            format!("postgresql://no_user@{host}:{port}")
+        };
         let mut safekeeper_connstrings = Vec::new();
         if self.mode == ComputeMode::Primary {
             for sk_id in safekeepers {
@@ -536,48 +478,17 @@ impl Endpoint {
             }
         }
 
-        // check for file remote_extensions_spec.json
-        // if it is present, read it and pass to compute_ctl
-        let remote_extensions_spec_path = self.endpoint_path().join("remote_extensions_spec.json");
-        let remote_extensions_spec = std::fs::File::open(remote_extensions_spec_path);
-        let remote_extensions: Option<RemoteExtSpec>;
-
-        if let Ok(spec_file) = remote_extensions_spec {
-            remote_extensions = serde_json::from_reader(spec_file).ok();
-        } else {
-            remote_extensions = None;
-        };
-
         // Create spec file
         let spec = ComputeSpec {
             skip_pg_catalog_updates: self.skip_pg_catalog_updates,
             format_version: 1.0,
             operation_uuid: None,
-            features: self.features.clone(),
             cluster: Cluster {
                 cluster_id: None, // project ID: not used
                 name: None,       // project name: not used
                 state: None,
-                roles: if create_test_user {
-                    vec![Role {
-                        name: PgIdent::from_str("test").unwrap(),
-                        encrypted_password: None,
-                        options: None,
-                    }]
-                } else {
-                    Vec::new()
-                },
-                databases: if create_test_user {
-                    vec![Database {
-                        name: PgIdent::from_str("neondb").unwrap(),
-                        owner: PgIdent::from_str("test").unwrap(),
-                        options: None,
-                        restrict_conn: false,
-                        invalid: false,
-                    }]
-                } else {
-                    Vec::new()
-                },
+                roles: vec![],
+                databases: vec![],
                 settings: None,
                 postgresql_conf: Some(postgresql_conf),
             },
@@ -588,10 +499,7 @@ impl Endpoint {
             pageserver_connstring: Some(pageserver_connstring),
             safekeeper_connstrings,
             storage_auth_token: auth_token.clone(),
-            remote_extensions,
-            pgbouncer_settings: None,
-            shard_stripe_size: Some(shard_stripe_size),
-            primary_is_running: None,
+            remote_extensions: None,
         };
         let spec_path = self.endpoint_path().join("spec.json");
         std::fs::write(spec_path, serde_json::to_string_pretty(&spec)?)?;
@@ -603,16 +511,11 @@ impl Endpoint {
             .open(self.endpoint_path().join("compute.log"))?;
 
         // Launch compute_ctl
-        let conn_str = self.connstr("cloud_admin", "postgres");
-        println!("Starting postgres node at '{}'", conn_str);
-        if create_test_user {
-            let conn_str = self.connstr("test", "neondb");
-            println!("Also at '{}'", conn_str);
-        }
+        println!("Starting postgres node at '{}'", self.connstr());
         let mut cmd = Command::new(self.env.neon_distrib_dir.join("compute_ctl"));
         cmd.args(["--http-port", &self.http_address.port().to_string()])
             .args(["--pgdata", self.pgdata().to_str().unwrap()])
-            .args(["--connstr", &conn_str])
+            .args(["--connstr", &self.connstr()])
             .args([
                 "--spec-path",
                 self.endpoint_path().join("spec.json").to_str().unwrap(),
@@ -634,21 +537,9 @@ impl Endpoint {
         }
 
         let child = cmd.spawn()?;
-        // set up a scopeguard to kill & wait for the child in case we panic or bail below
-        let child = scopeguard::guard(child, |mut child| {
-            println!("SIGKILL & wait the started process");
-            (|| {
-                // TODO: use another signal that can be caught by the child so it can clean up any children it spawned
-                child.kill().context("SIGKILL child")?;
-                child.wait().context("wait() for child process")?;
-                anyhow::Ok(())
-            })()
-            .with_context(|| format!("scopeguard kill&wait child {child:?}"))
-            .unwrap();
-        });
 
         // Write down the pid so we can wait for it when we want to stop
-        // TODO use background_process::start_process instead: https://github.com/neondatabase/neon/pull/6482
+        // TODO use background_process::start_process instead
         let pid = child.id();
         let pidfile_path = self.endpoint_path().join("compute_ctl.pid");
         std::fs::write(pidfile_path, pid.to_string())?;
@@ -656,10 +547,10 @@ impl Endpoint {
         // Wait for it to start
         let mut attempt = 0;
         const ATTEMPT_INTERVAL: Duration = Duration::from_millis(100);
-        const MAX_ATTEMPTS: u32 = 10 * 90; // Wait up to 1.5 min
+        const MAX_ATTEMPTS: u32 = 10 * 30; // Wait up to 30 s
         loop {
             attempt += 1;
-            match self.get_status().await {
+            match self.get_status() {
                 Ok(state) => {
                     match state.status {
                         ComputeStatus::Init => {
@@ -683,9 +574,7 @@ impl Endpoint {
                         }
                         ComputeStatus::Empty
                         | ComputeStatus::ConfigurationPending
-                        | ComputeStatus::Configuration
-                        | ComputeStatus::TerminationPending
-                        | ComputeStatus::Terminated => {
+                        | ComputeStatus::Configuration => {
                             bail!("unexpected compute status: {:?}", state.status)
                         }
                     }
@@ -699,15 +588,12 @@ impl Endpoint {
             std::thread::sleep(ATTEMPT_INTERVAL);
         }
 
-        // disarm the scopeguard, let the child outlive this function (and neon_local invoction)
-        drop(scopeguard::ScopeGuard::into_inner(child));
-
         Ok(())
     }
 
     // Call the /status HTTP API
-    pub async fn get_status(&self) -> Result<ComputeState> {
-        let client = reqwest::Client::new();
+    pub fn get_status(&self) -> Result<ComputeState> {
+        let client = reqwest::blocking::Client::new();
 
         let response = client
             .request(
@@ -718,17 +604,16 @@ impl Endpoint {
                     self.http_address.port()
                 ),
             )
-            .send()
-            .await?;
+            .send()?;
 
         // Interpret the response
         let status = response.status();
         if !(status.is_client_error() || status.is_server_error()) {
-            Ok(response.json().await?)
+            Ok(response.json()?)
         } else {
             // reqwest does not export its error construction utility functions, so let's craft the message ourselves
             let url = response.url().to_owned();
-            let msg = match response.text().await {
+            let msg = match response.text() {
                 Ok(err_body) => format!("Error: {}", err_body),
                 Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
             };
@@ -736,103 +621,34 @@ impl Endpoint {
         }
     }
 
-    pub async fn reconfigure(
-        &self,
-        mut pageservers: Vec<(Host, u16)>,
-        stripe_size: Option<ShardStripeSize>,
-    ) -> Result<()> {
-        let mut spec: ComputeSpec = {
-            let spec_path = self.endpoint_path().join("spec.json");
-            let file = std::fs::File::open(spec_path)?;
-            serde_json::from_reader(file)?
-        };
-
-        let postgresql_conf = self.read_postgresql_conf()?;
-        spec.cluster.postgresql_conf = Some(postgresql_conf);
-
-        // If we weren't given explicit pageservers, query the storage controller
-        if pageservers.is_empty() {
-            let storage_controller = StorageController::from_env(&self.env);
-            let locate_result = storage_controller.tenant_locate(self.tenant_id).await?;
-            pageservers = locate_result
-                .shards
-                .into_iter()
-                .map(|shard| {
-                    (
-                        Host::parse(&shard.listen_pg_addr)
-                            .expect("Storage controller reported bad hostname"),
-                        shard.listen_pg_port,
-                    )
-                })
-                .collect::<Vec<_>>();
-        }
-
-        let pageserver_connstr = Self::build_pageserver_connstr(&pageservers);
-        assert!(!pageserver_connstr.is_empty());
-        spec.pageserver_connstring = Some(pageserver_connstr);
-        if stripe_size.is_some() {
-            spec.shard_stripe_size = stripe_size.map(|s| s.0 as usize);
-        }
-
-        let client = reqwest::Client::builder()
-            .timeout(Duration::from_secs(30))
-            .build()
-            .unwrap();
-        let response = client
-            .post(format!(
-                "http://{}:{}/configure",
-                self.http_address.ip(),
-                self.http_address.port()
-            ))
-            .body(format!(
-                "{{\"spec\":{}}}",
-                serde_json::to_string_pretty(&spec)?
-            ))
-            .send()
-            .await?;
-
-        let status = response.status();
-        if !(status.is_client_error() || status.is_server_error()) {
-            Ok(())
-        } else {
-            let url = response.url().to_owned();
-            let msg = match response.text().await {
-                Ok(err_body) => format!("Error: {}", err_body),
-                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
-            };
-            Err(anyhow::anyhow!(msg))
-        }
-    }
-
-    pub fn stop(&self, mode: &str, destroy: bool) -> Result<()> {
-        self.pg_ctl(&["-m", mode, "stop"], &None)?;
-
-        // Also wait for the compute_ctl process to die. It might have some
-        // cleanup work to do after postgres stops, like syncing safekeepers,
-        // etc.
+    pub fn stop(&self, destroy: bool) -> Result<()> {
+        // If we are going to destroy data directory,
+        // use immediate shutdown mode, otherwise,
+        // shutdown gracefully to leave the data directory sane.
+        //
+        // Postgres is always started from scratch, so stop
+        // without destroy only used for testing and debugging.
         //
-        // If destroying, send it SIGTERM before waiting. Sometimes we do *not*
-        // want this cleanup: tests intentionally do stop when majority of
-        // safekeepers is down, so sync-safekeepers would hang otherwise. This
-        // could be a separate flag though.
-        self.wait_for_compute_ctl_to_exit(destroy)?;
         if destroy {
+            self.pg_ctl(&["-m", "immediate", "stop"], &None)?;
             println!(
                 "Destroying postgres data directory '{}'",
                 self.pgdata().to_str().unwrap()
             );
             std::fs::remove_dir_all(self.endpoint_path())?;
+        } else {
+            self.pg_ctl(&["stop"], &None)?;
         }
         Ok(())
     }
 
-    pub fn connstr(&self, user: &str, db_name: &str) -> String {
+    pub fn connstr(&self) -> String {
         format!(
             "postgresql://{}@{}:{}/{}",
-            user,
+            "cloud_admin",
             self.pg_address.ip(),
             self.pg_address.port(),
-            db_name
+            "postgres"
         )
     }
 }

control_plane/src/lib.rs

@@ -1,11 +1,13 @@
-//! Local control plane.
-//!
-//! Can start, configure and stop postgres instances running as a local processes.
-//!
-//! Intended to be used in integration tests and in CLI tools for
-//! local installations.
-#![deny(clippy::undocumented_unsafe_blocks)]
+//
+// Local control plane.
+//
+// Can start, configure and stop postgres instances running as a local processes.
+//
+// Intended to be used in integration tests and in CLI tools for
+// local installations.
+//
 
+pub mod attachment_service;
 mod background_process;
 pub mod broker;
 pub mod endpoint;
@@ -13,4 +15,3 @@ pub mod local_env;
 pub mod pageserver;
 pub mod postgresql_conf;
 pub mod safekeeper;
-pub mod storage_controller;

control_plane/src/local_env.rs

@@ -5,10 +5,10 @@
 
 use anyhow::{bail, ensure, Context};
 
-use clap::ValueEnum;
 use postgres_backend::AuthType;
 use reqwest::Url;
 use serde::{Deserialize, Serialize};
+use serde_with::{serde_as, DisplayFromStr};
 use std::collections::HashMap;
 use std::env;
 use std::fs;
@@ -33,6 +33,7 @@ pub const DEFAULT_PG_VERSION: u32 = 15;
 // to 'neon_local init --config=<path>' option. See control_plane/simple.conf for
 // an example.
 //
+#[serde_as]
 #[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
 pub struct LocalEnv {
     // Base directory for all the nodes (the pageserver, safekeepers and
@@ -58,6 +59,7 @@ pub struct LocalEnv {
     // Default tenant ID to use with the 'neon_local' command line utility, when
     // --tenant_id is not explicitly specified.
     #[serde(default)]
+    #[serde_as(as = "Option<DisplayFromStr>")]
     pub default_tenant_id: Option<TenantId>,
 
     // used to issue tokens during e.g pg start
@@ -72,21 +74,17 @@ pub struct LocalEnv {
     #[serde(default)]
     pub safekeepers: Vec<SafekeeperConf>,
 
-    // Control plane upcall API for pageserver: if None, we will not run storage_controller  If set, this will
+    // Control plane location: if None, we will not run attachment_service.  If set, this will
     // be propagated into each pageserver's configuration.
     #[serde(default)]
     pub control_plane_api: Option<Url>,
 
-    // Control plane upcall API for storage controller.  If set, this will be propagated into the
-    // storage controller's configuration.
-    #[serde(default)]
-    pub control_plane_compute_hook_api: Option<Url>,
-
     /// Keep human-readable aliases in memory (and persist them to config), to hide ZId hex strings from the user.
     #[serde(default)]
     // A `HashMap<String, HashMap<TenantId, TimelineId>>` would be more appropriate here,
     // but deserialization into a generic toml object as `toml::Value::try_from` fails with an error.
     // https://toml.io/en/v1.0.0 does not contain a concept of "a table inside another table".
+    #[serde_as(as = "HashMap<_, Vec<(DisplayFromStr, DisplayFromStr)>>")]
     branch_name_mappings: HashMap<String, Vec<(TenantId, TimelineId)>>,
 }
 
@@ -114,7 +112,7 @@ impl NeonBroker {
 }
 
 #[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
-#[serde(default, deny_unknown_fields)]
+#[serde(default)]
 pub struct PageServerConf {
     // node id
     pub id: NodeId,
@@ -126,9 +124,6 @@ pub struct PageServerConf {
     // auth type used for the PG and HTTP ports
     pub pg_auth_type: AuthType,
     pub http_auth_type: AuthType,
-
-    pub(crate) virtual_file_io_engine: Option<String>,
-    pub(crate) get_vectored_impl: Option<String>,
 }
 
 impl Default for PageServerConf {
@@ -139,8 +134,6 @@ impl Default for PageServerConf {
             listen_http_addr: String::new(),
             pg_auth_type: AuthType::Trust,
             http_auth_type: AuthType::Trust,
-            virtual_file_io_engine: None,
-            get_vectored_impl: None,
         }
     }
 }
@@ -173,31 +166,6 @@ impl Default for SafekeeperConf {
     }
 }
 
-#[derive(Clone, Copy)]
-pub enum InitForceMode {
-    MustNotExist,
-    EmptyDirOk,
-    RemoveAllContents,
-}
-
-impl ValueEnum for InitForceMode {
-    fn value_variants<'a>() -> &'a [Self] {
-        &[
-            Self::MustNotExist,
-            Self::EmptyDirOk,
-            Self::RemoveAllContents,
-        ]
-    }
-
-    fn to_possible_value(&self) -> Option<clap::builder::PossibleValue> {
-        Some(clap::builder::PossibleValue::new(match self {
-            InitForceMode::MustNotExist => "must-not-exist",
-            InitForceMode::EmptyDirOk => "empty-dir-ok",
-            InitForceMode::RemoveAllContents => "remove-all-contents",
-        }))
-    }
-}
-
 impl SafekeeperConf {
     /// Compute is served by port on which only tenant scoped tokens allowed, if
     /// it is configured.
@@ -232,12 +200,8 @@ impl LocalEnv {
         self.neon_distrib_dir.join("pageserver")
     }
 
-    pub fn storage_controller_bin(&self) -> PathBuf {
-        // Irrespective of configuration, storage controller binary is always
-        // run from the same location as neon_local.  This means that for compatibility
-        // tests that run old pageserver/safekeeper, they still run latest storage controller.
-        let neon_local_bin_dir = env::current_exe().unwrap().parent().unwrap().to_owned();
-        neon_local_bin_dir.join("storage_controller")
+    pub fn attachment_service_bin(&self) -> PathBuf {
+        self.neon_distrib_dir.join("attachment_service")
     }
 
     pub fn safekeeper_bin(&self) -> PathBuf {
@@ -265,13 +229,7 @@ impl LocalEnv {
         if let Some(conf) = self.pageservers.iter().find(|node| node.id == id) {
             Ok(conf)
         } else {
-            let have_ids = self
-                .pageservers
-                .iter()
-                .map(|node| format!("{}:{}", node.id, node.listen_http_addr))
-                .collect::<Vec<_>>();
-            let joined = have_ids.join(",");
-            bail!("could not find pageserver {id}, have ids {joined}")
+            bail!("could not find pageserver {id}")
         }
     }
 
@@ -417,23 +375,20 @@ impl LocalEnv {
 
     // this function is used only for testing purposes in CLI e g generate tokens during init
     pub fn generate_auth_token(&self, claims: &Claims) -> anyhow::Result<String> {
-        let private_key_path = self.get_private_key_path();
-        let key_data = fs::read(private_key_path)?;
-        encode_from_key_file(claims, &key_data)
-    }
-
-    pub fn get_private_key_path(&self) -> PathBuf {
-        if self.private_key_path.is_absolute() {
+        let private_key_path = if self.private_key_path.is_absolute() {
             self.private_key_path.to_path_buf()
         } else {
             self.base_data_dir.join(&self.private_key_path)
-        }
+        };
+
+        let key_data = fs::read(private_key_path)?;
+        encode_from_key_file(claims, &key_data)
     }
 
     //
     // Initialize a new Neon repository
     //
-    pub fn init(&mut self, pg_version: u32, force: &InitForceMode) -> anyhow::Result<()> {
+    pub fn init(&mut self, pg_version: u32, force: bool) -> anyhow::Result<()> {
         // check if config already exists
         let base_path = &self.base_data_dir;
         ensure!(
@@ -442,34 +397,25 @@ impl LocalEnv {
         );
 
         if base_path.exists() {
-            match force {
-                InitForceMode::MustNotExist => {
-                    bail!(
-                        "directory '{}' already exists. Perhaps already initialized?",
-                        base_path.display()
-                    );
-                }
-                InitForceMode::EmptyDirOk => {
-                    if let Some(res) = std::fs::read_dir(base_path)?.next() {
-                        res.context("check if directory is empty")?;
-                        anyhow::bail!("directory not empty: {base_path:?}");
-                    }
-                }
-                InitForceMode::RemoveAllContents => {
-                    println!("removing all contents of '{}'", base_path.display());
-                    // instead of directly calling `remove_dir_all`, we keep the original dir but removing
-                    // all contents inside. This helps if the developer symbol links another directory (i.e.,
-                    // S3 local SSD) to the `.neon` base directory.
-                    for entry in std::fs::read_dir(base_path)? {
-                        let entry = entry?;
-                        let path = entry.path();
-                        if path.is_dir() {
-                            fs::remove_dir_all(&path)?;
-                        } else {
-                            fs::remove_file(&path)?;
-                        }
+            if force {
+                println!("removing all contents of '{}'", base_path.display());
+                // instead of directly calling `remove_dir_all`, we keep the original dir but removing
+                // all contents inside. This helps if the developer symbol links another directory (i.e.,
+                // S3 local SSD) to the `.neon` base directory.
+                for entry in std::fs::read_dir(base_path)? {
+                    let entry = entry?;
+                    let path = entry.path();
+                    if path.is_dir() {
+                        fs::remove_dir_all(&path)?;
+                    } else {
+                        fs::remove_file(&path)?;
                     }
                 }
+            } else {
+                bail!(
+                    "directory '{}' already exists. Perhaps already initialized? (Hint: use --force to remove all contents)",
+                    base_path.display()
+                );
             }
         }
 

control_plane/src/pageserver.rs

@@ -6,26 +6,24 @@
 //!
 use std::borrow::Cow;
 use std::collections::HashMap;
-
-use std::io;
-use std::io::Write;
+use std::fs::File;
+use std::io::{BufReader, Write};
 use std::num::NonZeroU64;
 use std::path::PathBuf;
-use std::process::Command;
-use std::time::Duration;
+use std::process::{Child, Command};
+use std::{io, result};
 
 use anyhow::{bail, Context};
 use camino::Utf8PathBuf;
-use futures::SinkExt;
-use pageserver_api::models::{
-    self, LocationConfig, ShardParameters, TenantHistorySize, TenantInfo, TimelineInfo,
-};
-use pageserver_api::shard::TenantShardId;
-use pageserver_client::mgmt_api;
+use pageserver_api::models::{self, TenantInfo, TimelineInfo};
 use postgres_backend::AuthType;
 use postgres_connection::{parse_host_port, PgConnectionConfig};
+use reqwest::blocking::{Client, RequestBuilder, Response};
+use reqwest::{IntoUrl, Method};
+use thiserror::Error;
 use utils::auth::{Claims, Scope};
 use utils::{
+    http::error::HttpErrorBody,
     id::{TenantId, TimelineId},
     lsn::Lsn,
 };
@@ -33,8 +31,44 @@ use utils::{
 use crate::local_env::PageServerConf;
 use crate::{background_process, local_env::LocalEnv};
 
-/// Directory within .neon which will be used by default for LocalFs remote storage.
-pub const PAGESERVER_REMOTE_STORAGE_DIR: &str = "local_fs_remote_storage/pageserver";
+#[derive(Error, Debug)]
+pub enum PageserverHttpError {
+    #[error("Reqwest error: {0}")]
+    Transport(#[from] reqwest::Error),
+
+    #[error("Error: {0}")]
+    Response(String),
+}
+
+impl From<anyhow::Error> for PageserverHttpError {
+    fn from(e: anyhow::Error) -> Self {
+        Self::Response(e.to_string())
+    }
+}
+
+type Result<T> = result::Result<T, PageserverHttpError>;
+
+pub trait ResponseErrorMessageExt: Sized {
+    fn error_from_body(self) -> Result<Self>;
+}
+
+impl ResponseErrorMessageExt for Response {
+    fn error_from_body(self) -> Result<Self> {
+        let status = self.status();
+        if !(status.is_client_error() || status.is_server_error()) {
+            return Ok(self);
+        }
+
+        // reqwest does not export its error construction utility functions, so let's craft the message ourselves
+        let url = self.url().to_owned();
+        Err(PageserverHttpError::Response(
+            match self.json::<HttpErrorBody>() {
+                Ok(err_body) => format!("Error: {}", err_body.msg),
+                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
+            },
+        ))
+    }
+}
 
 //
 // Control routines for pageserver.
@@ -46,7 +80,8 @@ pub struct PageServerNode {
     pub pg_connection_config: PgConnectionConfig,
     pub conf: PageServerConf,
     pub env: LocalEnv,
-    pub http_client: mgmt_api::Client,
+    pub http_client: Client,
+    pub http_base_url: String,
 }
 
 impl PageServerNode {
@@ -58,59 +93,25 @@ impl PageServerNode {
             pg_connection_config: PgConnectionConfig::new_host_port(host, port),
             conf: conf.clone(),
             env: env.clone(),
-            http_client: mgmt_api::Client::new(
-                format!("http://{}", conf.listen_http_addr),
-                {
-                    match conf.http_auth_type {
-                        AuthType::Trust => None,
-                        AuthType::NeonJWT => Some(
-                            env.generate_auth_token(&Claims::new(None, Scope::PageServerApi))
-                                .unwrap(),
-                        ),
-                    }
-                }
-                .as_deref(),
-            ),
+            http_client: Client::new(),
+            http_base_url: format!("http://{}/v1", conf.listen_http_addr),
         }
     }
 
-    /// Merge overrides provided by the user on the command line with our default overides derived from neon_local configuration.
-    ///
-    /// These all end up on the command line of the `pageserver` binary.
-    fn neon_local_overrides(&self, cli_overrides: &[&str]) -> Vec<String> {
+    // pageserver conf overrides defined by neon_local configuration.
+    fn neon_local_overrides(&self) -> Vec<String> {
+        let id = format!("id={}", self.conf.id);
         // FIXME: the paths should be shell-escaped to handle paths with spaces, quotas etc.
         let pg_distrib_dir_param = format!(
             "pg_distrib_dir='{}'",
             self.env.pg_distrib_dir_raw().display()
         );
 
-        let PageServerConf {
-            id,
-            listen_pg_addr,
-            listen_http_addr,
-            pg_auth_type,
-            http_auth_type,
-            virtual_file_io_engine,
-            get_vectored_impl,
-        } = &self.conf;
+        let http_auth_type_param = format!("http_auth_type='{}'", self.conf.http_auth_type);
+        let listen_http_addr_param = format!("listen_http_addr='{}'", self.conf.listen_http_addr);
 
-        let id = format!("id={}", id);
-
-        let http_auth_type_param = format!("http_auth_type='{}'", http_auth_type);
-        let listen_http_addr_param = format!("listen_http_addr='{}'", listen_http_addr);
-
-        let pg_auth_type_param = format!("pg_auth_type='{}'", pg_auth_type);
-        let listen_pg_addr_param = format!("listen_pg_addr='{}'", listen_pg_addr);
-        let virtual_file_io_engine = if let Some(virtual_file_io_engine) = virtual_file_io_engine {
-            format!("virtual_file_io_engine='{virtual_file_io_engine}'")
-        } else {
-            String::new()
-        };
-        let get_vectored_impl = if let Some(get_vectored_impl) = get_vectored_impl {
-            format!("get_vectored_impl='{get_vectored_impl}'")
-        } else {
-            String::new()
-        };
+        let pg_auth_type_param = format!("pg_auth_type='{}'", self.conf.pg_auth_type);
+        let listen_pg_addr_param = format!("listen_pg_addr='{}'", self.conf.listen_pg_addr);
 
         let broker_endpoint_param = format!("broker_endpoint='{}'", self.env.broker.client_url());
 
@@ -122,8 +123,6 @@ impl PageServerNode {
             listen_http_addr_param,
             listen_pg_addr_param,
             broker_endpoint_param,
-            virtual_file_io_engine,
-            get_vectored_impl,
         ];
 
         if let Some(control_plane_api) = &self.env.control_plane_api {
@@ -131,36 +130,14 @@ impl PageServerNode {
                 "control_plane_api='{}'",
                 control_plane_api.as_str()
             ));
-
-            // Storage controller uses the same auth as pageserver: if JWT is enabled
-            // for us, we will also need it to talk to them.
-            if matches!(http_auth_type, AuthType::NeonJWT) {
-                let jwt_token = self
-                    .env
-                    .generate_auth_token(&Claims::new(None, Scope::GenerationsApi))
-                    .unwrap();
-                overrides.push(format!("control_plane_api_token='{}'", jwt_token));
-            }
         }
 
-        if !cli_overrides
-            .iter()
-            .any(|c| c.starts_with("remote_storage"))
+        if self.conf.http_auth_type != AuthType::Trust || self.conf.pg_auth_type != AuthType::Trust
         {
-            overrides.push(format!(
-                "remote_storage={{local_path='../{PAGESERVER_REMOTE_STORAGE_DIR}'}}"
-            ));
-        }
-
-        if *http_auth_type != AuthType::Trust || *pg_auth_type != AuthType::Trust {
             // Keys are generated in the toplevel repo dir, pageservers' workdirs
             // are one level below that, so refer to keys with ../
             overrides.push("auth_validation_public_key_path='../auth_public_key.pem'".to_owned());
         }
-
-        // Apply the user-provided overrides
-        overrides.extend(cli_overrides.iter().map(|&c| c.to_owned()));
-
         overrides
     }
 
@@ -183,8 +160,8 @@ impl PageServerNode {
             .expect("non-Unicode path")
     }
 
-    pub async fn start(&self, config_overrides: &[&str]) -> anyhow::Result<()> {
-        self.start_node(config_overrides, false).await
+    pub fn start(&self, config_overrides: &[&str]) -> anyhow::Result<Child> {
+        self.start_node(config_overrides, false)
     }
 
     fn pageserver_init(&self, config_overrides: &[&str]) -> anyhow::Result<()> {
@@ -222,37 +199,13 @@ impl PageServerNode {
             String::from_utf8_lossy(&init_output.stderr),
         );
 
-        // Write metadata file, used by pageserver on startup to register itself with
-        // the storage controller
-        let metadata_path = datadir.join("metadata.json");
-
-        let (_http_host, http_port) =
-            parse_host_port(&self.conf.listen_http_addr).expect("Unable to parse listen_http_addr");
-        let http_port = http_port.unwrap_or(9898);
-        // Intentionally hand-craft JSON: this acts as an implicit format compat test
-        // in case the pageserver-side structure is edited, and reflects the real life
-        // situation: the metadata is written by some other script.
-        std::fs::write(
-            metadata_path,
-            serde_json::to_vec(&serde_json::json!({
-                "host": "localhost",
-                "port": self.pg_connection_config.port(),
-                "http_host": "localhost",
-                "http_port": http_port,
-            }))
-            .unwrap(),
-        )
-        .expect("Failed to write metadata file");
-
         Ok(())
     }
 
-    async fn start_node(
-        &self,
-        config_overrides: &[&str],
-        update_config: bool,
-    ) -> anyhow::Result<()> {
-        // TODO: using a thread here because start_process() is not async but we need to call check_status()
+    fn start_node(&self, config_overrides: &[&str], update_config: bool) -> anyhow::Result<Child> {
+        let mut overrides = self.neon_local_overrides();
+        overrides.extend(config_overrides.iter().map(|&c| c.to_owned()));
+
         let datadir = self.repo_path();
         print!(
             "Starting pageserver node {} at '{}' in {:?}",
@@ -260,7 +213,7 @@ impl PageServerNode {
             self.pg_connection_config.raw_address(),
             datadir
         );
-        io::stdout().flush().context("flush stdout")?;
+        io::stdout().flush()?;
 
         let datadir_path_str = datadir.to_str().with_context(|| {
             format!(
@@ -272,25 +225,20 @@ impl PageServerNode {
         if update_config {
             args.push(Cow::Borrowed("--update-config"));
         }
+
         background_process::start_process(
             "pageserver",
             &datadir,
             &self.env.pageserver_bin(),
             args.iter().map(Cow::as_ref),
             self.pageserver_env_variables()?,
-            background_process::InitialPidFile::Expect(self.pid_file()),
-            || async {
-                let st = self.check_status().await;
-                match st {
-                    Ok(()) => Ok(true),
-                    Err(mgmt_api::Error::ReceiveBody(_)) => Ok(false),
-                    Err(e) => Err(anyhow::anyhow!("Failed to check node status: {e}")),
-                }
+            background_process::InitialPidFile::Expect(&self.pid_file()),
+            || match self.check_status() {
+                Ok(()) => Ok(true),
+                Err(PageserverHttpError::Transport(_)) => Ok(false),
+                Err(e) => Err(anyhow::anyhow!("Failed to check node status: {e}")),
             },
         )
-        .await?;
-
-        Ok(())
     }
 
     fn pageserver_basic_args<'a>(
@@ -300,7 +248,8 @@ impl PageServerNode {
     ) -> Vec<Cow<'a, str>> {
         let mut args = vec![Cow::Borrowed("-D"), Cow::Borrowed(datadir_path_str)];
 
-        let overrides = self.neon_local_overrides(config_overrides);
+        let mut overrides = self.neon_local_overrides();
+        overrides.extend(config_overrides.iter().map(|&c| c.to_owned()));
         for config_override in overrides {
             args.push(Cow::Borrowed("-c"));
             args.push(Cow::Owned(config_override));
@@ -336,12 +285,7 @@ impl PageServerNode {
         background_process::stop_process(immediate, "pageserver", &self.pid_file())
     }
 
-    pub async fn page_server_psql_client(
-        &self,
-    ) -> anyhow::Result<(
-        tokio_postgres::Client,
-        tokio_postgres::Connection<tokio_postgres::Socket, tokio_postgres::tls::NoTlsStream>,
-    )> {
+    pub fn page_server_psql_client(&self) -> anyhow::Result<postgres::Client> {
         let mut config = self.pg_connection_config.clone();
         if self.conf.pg_auth_type == AuthType::NeonJWT {
             let token = self
@@ -349,18 +293,44 @@ impl PageServerNode {
                 .generate_auth_token(&Claims::new(None, Scope::PageServerApi))?;
             config = config.set_password(Some(token));
         }
-        Ok(config.connect_no_tls().await?)
+        Ok(config.connect_no_tls()?)
     }
 
-    pub async fn check_status(&self) -> mgmt_api::Result<()> {
-        self.http_client.status().await
+    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> anyhow::Result<RequestBuilder> {
+        let mut builder = self.http_client.request(method, url);
+        if self.conf.http_auth_type == AuthType::NeonJWT {
+            let token = self
+                .env
+                .generate_auth_token(&Claims::new(None, Scope::PageServerApi))?;
+            builder = builder.bearer_auth(token)
+        }
+        Ok(builder)
     }
 
-    pub async fn tenant_list(&self) -> mgmt_api::Result<Vec<TenantInfo>> {
-        self.http_client.list_tenants().await
+    pub fn check_status(&self) -> Result<()> {
+        self.http_request(Method::GET, format!("{}/status", self.http_base_url))?
+            .send()?
+            .error_from_body()?;
+        Ok(())
     }
-    pub fn parse_config(mut settings: HashMap<&str, &str>) -> anyhow::Result<models::TenantConfig> {
-        let result = models::TenantConfig {
+
+    pub fn tenant_list(&self) -> Result<Vec<TenantInfo>> {
+        Ok(self
+            .http_request(Method::GET, format!("{}/tenant", self.http_base_url))?
+            .send()?
+            .error_from_body()?
+            .json()?)
+    }
+
+    pub fn tenant_create(
+        &self,
+        new_tenant_id: TenantId,
+        generation: Option<u32>,
+        settings: HashMap<&str, &str>,
+    ) -> anyhow::Result<TenantId> {
+        let mut settings = settings.clone();
+
+        let config = models::TenantConfig {
             checkpoint_distance: settings
                 .remove("checkpoint_distance")
                 .map(|x| x.parse::<u64>())
@@ -375,11 +345,6 @@ impl PageServerNode {
                 .remove("compaction_threshold")
                 .map(|x| x.parse::<usize>())
                 .transpose()?,
-            compaction_algorithm: settings
-                .remove("compaction_algorithm")
-                .map(serde_json::from_str)
-                .transpose()
-                .context("Failed to parse 'compaction_algorithm' json")?,
             gc_horizon: settings
                 .remove("gc_horizon")
                 .map(|x| x.parse::<u64>())
@@ -389,10 +354,6 @@ impl PageServerNode {
                 .remove("image_creation_threshold")
                 .map(|x| x.parse::<usize>())
                 .transpose()?,
-            image_layer_creation_check_threshold: settings
-                .remove("image_layer_creation_check_threshold")
-                .map(|x| x.parse::<u8>())
-                .transpose()?,
             pitr_interval: settings.remove("pitr_interval").map(|x| x.to_string()),
             walreceiver_connect_timeout: settings
                 .remove("walreceiver_connect_timeout")
@@ -423,48 +384,38 @@ impl PageServerNode {
             evictions_low_residence_duration_metric_threshold: settings
                 .remove("evictions_low_residence_duration_metric_threshold")
                 .map(|x| x.to_string()),
-            heatmap_period: settings.remove("heatmap_period").map(|x| x.to_string()),
-            lazy_slru_download: settings
-                .remove("lazy_slru_download")
+            gc_feedback: settings
+                .remove("gc_feedback")
                 .map(|x| x.parse::<bool>())
                 .transpose()
-                .context("Failed to parse 'lazy_slru_download' as bool")?,
-            timeline_get_throttle: settings
-                .remove("timeline_get_throttle")
-                .map(serde_json::from_str)
-                .transpose()
-                .context("parse `timeline_get_throttle` from json")?,
+                .context("Failed to parse 'gc_feedback' as bool")?,
         };
-        if !settings.is_empty() {
-            bail!("Unrecognized tenant settings: {settings:?}")
-        } else {
-            Ok(result)
-        }
-    }
-
-    pub async fn tenant_create(
-        &self,
-        new_tenant_id: TenantId,
-        generation: Option<u32>,
-        settings: HashMap<&str, &str>,
-    ) -> anyhow::Result<TenantId> {
-        let config = Self::parse_config(settings.clone())?;
 
         let request = models::TenantCreateRequest {
-            new_tenant_id: TenantShardId::unsharded(new_tenant_id),
+            new_tenant_id,
             generation,
             config,
-            shard_parameters: ShardParameters::default(),
-            // Placement policy is not meaningful for creations not done via storage controller
-            placement_policy: None,
         };
         if !settings.is_empty() {
             bail!("Unrecognized tenant settings: {settings:?}")
         }
-        Ok(self.http_client.tenant_create(&request).await?)
+        self.http_request(Method::POST, format!("{}/tenant", self.http_base_url))?
+            .json(&request)
+            .send()?
+            .error_from_body()?
+            .json::<Option<String>>()
+            .with_context(|| {
+                format!("Failed to parse tenant creation response for tenant id: {new_tenant_id:?}")
+            })?
+            .context("No tenant id was found in the tenant creation response")
+            .and_then(|tenant_id_string| {
+                tenant_id_string.parse().with_context(|| {
+                    format!("Failed to parse response string as tenant id: '{tenant_id_string}'")
+                })
+            })
     }
 
-    pub async fn tenant_config(
+    pub fn tenant_config(
         &self,
         tenant_id: TenantId,
         mut settings: HashMap<&str, &str>,
@@ -489,11 +440,6 @@ impl PageServerNode {
                     .map(|x| x.parse::<usize>())
                     .transpose()
                     .context("Failed to parse 'compaction_threshold' as an integer")?,
-                compaction_algorithm: settings
-                    .remove("compactin_algorithm")
-                    .map(serde_json::from_str)
-                    .transpose()
-                    .context("Failed to parse 'compaction_algorithm' json")?,
                 gc_horizon: settings
                     .remove("gc_horizon")
                     .map(|x| x.parse::<u64>())
@@ -505,12 +451,6 @@ impl PageServerNode {
                     .map(|x| x.parse::<usize>())
                     .transpose()
                     .context("Failed to parse 'image_creation_threshold' as non zero integer")?,
-                image_layer_creation_check_threshold: settings
-                    .remove("image_layer_creation_check_threshold")
-                    .map(|x| x.parse::<u8>())
-                    .transpose()
-                    .context("Failed to parse 'image_creation_check_threshold' as integer")?,
-
                 pitr_interval: settings.remove("pitr_interval").map(|x| x.to_string()),
                 walreceiver_connect_timeout: settings
                     .remove("walreceiver_connect_timeout")
@@ -541,17 +481,11 @@ impl PageServerNode {
                 evictions_low_residence_duration_metric_threshold: settings
                     .remove("evictions_low_residence_duration_metric_threshold")
                     .map(|x| x.to_string()),
-                heatmap_period: settings.remove("heatmap_period").map(|x| x.to_string()),
-                lazy_slru_download: settings
-                    .remove("lazy_slru_download")
+                gc_feedback: settings
+                    .remove("gc_feedback")
                     .map(|x| x.parse::<bool>())
                     .transpose()
-                    .context("Failed to parse 'lazy_slru_download' as bool")?,
-                timeline_get_throttle: settings
-                    .remove("timeline_get_throttle")
-                    .map(serde_json::from_str)
-                    .transpose()
-                    .context("parse `timeline_get_throttle` from json")?,
+                    .context("Failed to parse 'gc_feedback' as bool")?,
             }
         };
 
@@ -559,53 +493,59 @@ impl PageServerNode {
             bail!("Unrecognized tenant settings: {settings:?}")
         }
 
-        self.http_client
-            .tenant_config(&models::TenantConfigRequest { tenant_id, config })
-            .await?;
+        self.http_request(Method::PUT, format!("{}/tenant/config", self.http_base_url))?
+            .json(&models::TenantConfigRequest { tenant_id, config })
+            .send()?
+            .error_from_body()?;
 
         Ok(())
     }
 
-    pub async fn location_config(
-        &self,
-        tenant_shard_id: TenantShardId,
-        config: LocationConfig,
-        flush_ms: Option<Duration>,
-        lazy: bool,
-    ) -> anyhow::Result<()> {
-        Ok(self
-            .http_client
-            .location_config(tenant_shard_id, config, flush_ms, lazy)
-            .await?)
+    pub fn timeline_list(&self, tenant_id: &TenantId) -> anyhow::Result<Vec<TimelineInfo>> {
+        let timeline_infos: Vec<TimelineInfo> = self
+            .http_request(
+                Method::GET,
+                format!("{}/tenant/{}/timeline", self.http_base_url, tenant_id),
+            )?
+            .send()?
+            .error_from_body()?
+            .json()?;
+
+        Ok(timeline_infos)
     }
 
-    pub async fn timeline_list(
+    pub fn timeline_create(
         &self,
-        tenant_shard_id: &TenantShardId,
-    ) -> anyhow::Result<Vec<TimelineInfo>> {
-        Ok(self.http_client.list_timelines(*tenant_shard_id).await?)
-    }
-
-    pub async fn timeline_create(
-        &self,
-        tenant_shard_id: TenantShardId,
-        new_timeline_id: TimelineId,
+        tenant_id: TenantId,
+        new_timeline_id: Option<TimelineId>,
         ancestor_start_lsn: Option<Lsn>,
         ancestor_timeline_id: Option<TimelineId>,
         pg_version: Option<u32>,
-        existing_initdb_timeline_id: Option<TimelineId>,
     ) -> anyhow::Result<TimelineInfo> {
-        let req = models::TimelineCreateRequest {
+        // If timeline ID was not specified, generate one
+        let new_timeline_id = new_timeline_id.unwrap_or(TimelineId::generate());
+
+        self.http_request(
+            Method::POST,
+            format!("{}/tenant/{}/timeline", self.http_base_url, tenant_id),
+        )?
+        .json(&models::TimelineCreateRequest {
             new_timeline_id,
             ancestor_start_lsn,
             ancestor_timeline_id,
             pg_version,
-            existing_initdb_timeline_id,
-        };
-        Ok(self
-            .http_client
-            .timeline_create(tenant_shard_id, &req)
-            .await?)
+        })
+        .send()?
+        .error_from_body()?
+        .json::<Option<TimelineInfo>>()
+        .with_context(|| {
+            format!("Failed to parse timeline creation response for tenant id: {tenant_id}")
+        })?
+        .with_context(|| {
+            format!(
+                "No timeline id was found in the timeline creation response for tenant {tenant_id}"
+            )
+        })
     }
 
     /// Import a basebackup prepared using either:
@@ -617,7 +557,7 @@ impl PageServerNode {
     /// * `timeline_id` - id to assign to imported timeline
     /// * `base` - (start lsn of basebackup, path to `base.tar` file)
     /// * `pg_wal` - if there's any wal to import: (end lsn, path to `pg_wal.tar`)
-    pub async fn timeline_import(
+    pub fn timeline_import(
         &self,
         tenant_id: TenantId,
         timeline_id: TimelineId,
@@ -625,72 +565,38 @@ impl PageServerNode {
         pg_wal: Option<(Lsn, PathBuf)>,
         pg_version: u32,
     ) -> anyhow::Result<()> {
-        let (client, conn) = self.page_server_psql_client().await?;
-        // The connection object performs the actual communication with the database,
-        // so spawn it off to run on its own.
-        tokio::spawn(async move {
-            if let Err(e) = conn.await {
-                eprintln!("connection error: {}", e);
-            }
-        });
-        let client = std::pin::pin!(client);
+        let mut client = self.page_server_psql_client()?;
 
         // Init base reader
         let (start_lsn, base_tarfile_path) = base;
-        let base_tarfile = tokio::fs::File::open(base_tarfile_path).await?;
-        let base_tarfile = tokio_util::io::ReaderStream::new(base_tarfile);
+        let base_tarfile = File::open(base_tarfile_path)?;
+        let mut base_reader = BufReader::new(base_tarfile);
 
         // Init wal reader if necessary
         let (end_lsn, wal_reader) = if let Some((end_lsn, wal_tarfile_path)) = pg_wal {
-            let wal_tarfile = tokio::fs::File::open(wal_tarfile_path).await?;
-            let wal_reader = tokio_util::io::ReaderStream::new(wal_tarfile);
+            let wal_tarfile = File::open(wal_tarfile_path)?;
+            let wal_reader = BufReader::new(wal_tarfile);
             (end_lsn, Some(wal_reader))
         } else {
             (start_lsn, None)
         };
 
-        let copy_in = |reader, cmd| {
-            let client = &client;
-            async move {
-                let writer = client.copy_in(&cmd).await?;
-                let writer = std::pin::pin!(writer);
-                let mut writer = writer.sink_map_err(|e| {
-                    std::io::Error::new(std::io::ErrorKind::Other, format!("{e}"))
-                });
-                let mut reader = std::pin::pin!(reader);
-                writer.send_all(&mut reader).await?;
-                writer.into_inner().finish().await?;
-                anyhow::Ok(())
-            }
-        };
-
         // Import base
-        copy_in(
-            base_tarfile,
-            format!(
-                "import basebackup {tenant_id} {timeline_id} {start_lsn} {end_lsn} {pg_version}"
-            ),
-        )
-        .await?;
+        let import_cmd = format!(
+            "import basebackup {tenant_id} {timeline_id} {start_lsn} {end_lsn} {pg_version}"
+        );
+        let mut writer = client.copy_in(&import_cmd)?;
+        io::copy(&mut base_reader, &mut writer)?;
+        writer.finish()?;
+
         // Import wal if necessary
-        if let Some(wal_reader) = wal_reader {
-            copy_in(
-                wal_reader,
-                format!("import wal {tenant_id} {timeline_id} {start_lsn} {end_lsn}"),
-            )
-            .await?;
+        if let Some(mut wal_reader) = wal_reader {
+            let import_cmd = format!("import wal {tenant_id} {timeline_id} {start_lsn} {end_lsn}");
+            let mut writer = client.copy_in(&import_cmd)?;
+            io::copy(&mut wal_reader, &mut writer)?;
+            writer.finish()?;
         }
 
         Ok(())
     }
-
-    pub async fn tenant_synthetic_size(
-        &self,
-        tenant_shard_id: TenantShardId,
-    ) -> anyhow::Result<TenantHistorySize> {
-        Ok(self
-            .http_client
-            .tenant_synthetic_size(tenant_shard_id)
-            .await?)
-    }
 }

control_plane/src/safekeeper.rs

@@ -7,11 +7,13 @@
 //! ```
 use std::io::Write;
 use std::path::PathBuf;
+use std::process::Child;
 use std::{io, result};
 
 use anyhow::Context;
 use camino::Utf8PathBuf;
 use postgres_connection::PgConnectionConfig;
+use reqwest::blocking::{Client, RequestBuilder, Response};
 use reqwest::{IntoUrl, Method};
 use thiserror::Error;
 use utils::{http::error::HttpErrorBody, id::NodeId};
@@ -32,14 +34,12 @@ pub enum SafekeeperHttpError {
 
 type Result<T> = result::Result<T, SafekeeperHttpError>;
 
-#[async_trait::async_trait]
 pub trait ResponseErrorMessageExt: Sized {
-    async fn error_from_body(self) -> Result<Self>;
+    fn error_from_body(self) -> Result<Self>;
 }
 
-#[async_trait::async_trait]
-impl ResponseErrorMessageExt for reqwest::Response {
-    async fn error_from_body(self) -> Result<Self> {
+impl ResponseErrorMessageExt for Response {
+    fn error_from_body(self) -> Result<Self> {
         let status = self.status();
         if !(status.is_client_error() || status.is_server_error()) {
             return Ok(self);
@@ -48,7 +48,7 @@ impl ResponseErrorMessageExt for reqwest::Response {
         // reqwest does not export its error construction utility functions, so let's craft the message ourselves
         let url = self.url().to_owned();
         Err(SafekeeperHttpError::Response(
-            match self.json::<HttpErrorBody>().await {
+            match self.json::<HttpErrorBody>() {
                 Ok(err_body) => format!("Error: {}", err_body.msg),
                 Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
             },
@@ -69,7 +69,7 @@ pub struct SafekeeperNode {
 
     pub pg_connection_config: PgConnectionConfig,
     pub env: LocalEnv,
-    pub http_client: reqwest::Client,
+    pub http_client: Client,
     pub http_base_url: String,
 }
 
@@ -80,7 +80,7 @@ impl SafekeeperNode {
             conf: conf.clone(),
             pg_connection_config: Self::safekeeper_connection_config(conf.pg_port),
             env: env.clone(),
-            http_client: reqwest::Client::new(),
+            http_client: Client::new(),
             http_base_url: format!("http://127.0.0.1:{}/v1", conf.http_port),
         }
     }
@@ -103,7 +103,7 @@ impl SafekeeperNode {
             .expect("non-Unicode path")
     }
 
-    pub async fn start(&self, extra_opts: Vec<String>) -> anyhow::Result<()> {
+    pub fn start(&self, extra_opts: Vec<String>) -> anyhow::Result<Child> {
         print!(
             "Starting safekeeper at '{}' in '{}'",
             self.pg_connection_config.raw_address(),
@@ -191,16 +191,13 @@ impl SafekeeperNode {
             &self.env.safekeeper_bin(),
             &args,
             [],
-            background_process::InitialPidFile::Expect(self.pid_file()),
-            || async {
-                match self.check_status().await {
-                    Ok(()) => Ok(true),
-                    Err(SafekeeperHttpError::Transport(_)) => Ok(false),
-                    Err(e) => Err(anyhow::anyhow!("Failed to check node status: {e}")),
-                }
+            background_process::InitialPidFile::Expect(&self.pid_file()),
+            || match self.check_status() {
+                Ok(()) => Ok(true),
+                Err(SafekeeperHttpError::Transport(_)) => Ok(false),
+                Err(e) => Err(anyhow::anyhow!("Failed to check node status: {e}")),
             },
         )
-        .await
     }
 
     ///
@@ -219,7 +216,7 @@ impl SafekeeperNode {
         )
     }
 
-    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> reqwest::RequestBuilder {
+    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> RequestBuilder {
         // TODO: authentication
         //if self.env.auth_type == AuthType::NeonJWT {
         //    builder = builder.bearer_auth(&self.env.safekeeper_auth_token)
@@ -227,12 +224,10 @@ impl SafekeeperNode {
         self.http_client.request(method, url)
     }
 
-    pub async fn check_status(&self) -> Result<()> {
+    pub fn check_status(&self) -> Result<()> {
         self.http_request(Method::GET, format!("{}/{}", self.http_base_url, "status"))
-            .send()
-            .await?
-            .error_from_body()
-            .await?;
+            .send()?
+            .error_from_body()?;
         Ok(())
     }
 }

control_plane/src/storage_controller.rs

@@ -1,555 +0,0 @@
-use crate::{background_process, local_env::LocalEnv};
-use camino::{Utf8Path, Utf8PathBuf};
-use hyper::Method;
-use pageserver_api::{
-    controller_api::{
-        NodeConfigureRequest, NodeRegisterRequest, TenantCreateResponse, TenantLocateResponse,
-        TenantShardMigrateRequest, TenantShardMigrateResponse,
-    },
-    models::{
-        TenantCreateRequest, TenantShardSplitRequest, TenantShardSplitResponse,
-        TimelineCreateRequest, TimelineInfo,
-    },
-    shard::{ShardStripeSize, TenantShardId},
-};
-use pageserver_client::mgmt_api::ResponseErrorMessageExt;
-use postgres_backend::AuthType;
-use serde::{de::DeserializeOwned, Deserialize, Serialize};
-use std::{fs, str::FromStr};
-use tokio::process::Command;
-use tracing::instrument;
-use url::Url;
-use utils::{
-    auth::{encode_from_key_file, Claims, Scope},
-    id::{NodeId, TenantId},
-};
-
-pub struct StorageController {
-    env: LocalEnv,
-    listen: String,
-    path: Utf8PathBuf,
-    private_key: Option<Vec<u8>>,
-    public_key: Option<String>,
-    postgres_port: u16,
-    client: reqwest::Client,
-}
-
-const COMMAND: &str = "storage_controller";
-
-const STORAGE_CONTROLLER_POSTGRES_VERSION: u32 = 16;
-
-// Use a shorter pageserver unavailability interval than the default to speed up tests.
-const NEON_LOCAL_MAX_UNAVAILABLE_INTERVAL: std::time::Duration = std::time::Duration::from_secs(10);
-
-#[derive(Serialize, Deserialize)]
-pub struct AttachHookRequest {
-    pub tenant_shard_id: TenantShardId,
-    pub node_id: Option<NodeId>,
-}
-
-#[derive(Serialize, Deserialize)]
-pub struct AttachHookResponse {
-    pub gen: Option<u32>,
-}
-
-#[derive(Serialize, Deserialize)]
-pub struct InspectRequest {
-    pub tenant_shard_id: TenantShardId,
-}
-
-#[derive(Serialize, Deserialize)]
-pub struct InspectResponse {
-    pub attachment: Option<(u32, NodeId)>,
-}
-
-impl StorageController {
-    pub fn from_env(env: &LocalEnv) -> Self {
-        let path = Utf8PathBuf::from_path_buf(env.base_data_dir.clone())
-            .unwrap()
-            .join("attachments.json");
-
-        // Makes no sense to construct this if pageservers aren't going to use it: assume
-        // pageservers have control plane API set
-        let listen_url = env.control_plane_api.clone().unwrap();
-
-        let listen = format!(
-            "{}:{}",
-            listen_url.host_str().unwrap(),
-            listen_url.port().unwrap()
-        );
-
-        // Convention: NeonEnv in python tests reserves the next port after the control_plane_api
-        // port, for use by our captive postgres.
-        let postgres_port = listen_url
-            .port()
-            .expect("Control plane API setting should always have a port")
-            + 1;
-
-        // Assume all pageservers have symmetric auth configuration: this service
-        // expects to use one JWT token to talk to all of them.
-        let ps_conf = env
-            .pageservers
-            .first()
-            .expect("Config is validated to contain at least one pageserver");
-        let (private_key, public_key) = match ps_conf.http_auth_type {
-            AuthType::Trust => (None, None),
-            AuthType::NeonJWT => {
-                let private_key_path = env.get_private_key_path();
-                let private_key = fs::read(private_key_path).expect("failed to read private key");
-
-                // If pageserver auth is enabled, this implicitly enables auth for this service,
-                // using the same credentials.
-                let public_key_path =
-                    camino::Utf8PathBuf::try_from(env.base_data_dir.join("auth_public_key.pem"))
-                        .unwrap();
-
-                // This service takes keys as a string rather than as a path to a file/dir: read the key into memory.
-                let public_key = if std::fs::metadata(&public_key_path)
-                    .expect("Can't stat public key")
-                    .is_dir()
-                {
-                    // Our config may specify a directory: this is for the pageserver's ability to handle multiple
-                    // keys.  We only use one key at a time, so, arbitrarily load the first one in the directory.
-                    let mut dir =
-                        std::fs::read_dir(&public_key_path).expect("Can't readdir public key path");
-                    let dent = dir
-                        .next()
-                        .expect("Empty key dir")
-                        .expect("Error reading key dir");
-
-                    std::fs::read_to_string(dent.path()).expect("Can't read public key")
-                } else {
-                    std::fs::read_to_string(&public_key_path).expect("Can't read public key")
-                };
-                (Some(private_key), Some(public_key))
-            }
-        };
-
-        Self {
-            env: env.clone(),
-            path,
-            listen,
-            private_key,
-            public_key,
-            postgres_port,
-            client: reqwest::ClientBuilder::new()
-                .build()
-                .expect("Failed to construct http client"),
-        }
-    }
-
-    fn pid_file(&self) -> Utf8PathBuf {
-        Utf8PathBuf::from_path_buf(self.env.base_data_dir.join("storage_controller.pid"))
-            .expect("non-Unicode path")
-    }
-
-    /// PIDFile for the postgres instance used to store storage controller state
-    fn postgres_pid_file(&self) -> Utf8PathBuf {
-        Utf8PathBuf::from_path_buf(
-            self.env
-                .base_data_dir
-                .join("storage_controller_postgres.pid"),
-        )
-        .expect("non-Unicode path")
-    }
-
-    /// Find the directory containing postgres binaries, such as `initdb` and `pg_ctl`
-    ///
-    /// This usually uses STORAGE_CONTROLLER_POSTGRES_VERSION of postgres, but will fall back
-    /// to other versions if that one isn't found.  Some automated tests create circumstances
-    /// where only one version is available in pg_distrib_dir, such as `test_remote_extensions`.
-    pub async fn get_pg_bin_dir(&self) -> anyhow::Result<Utf8PathBuf> {
-        let prefer_versions = [STORAGE_CONTROLLER_POSTGRES_VERSION, 15, 14];
-
-        for v in prefer_versions {
-            let path = Utf8PathBuf::from_path_buf(self.env.pg_bin_dir(v)?).unwrap();
-            if tokio::fs::try_exists(&path).await? {
-                return Ok(path);
-            }
-        }
-
-        // Fall through
-        anyhow::bail!(
-            "Postgres binaries not found in {}",
-            self.env.pg_distrib_dir.display()
-        );
-    }
-
-    /// Readiness check for our postgres process
-    async fn pg_isready(&self, pg_bin_dir: &Utf8Path) -> anyhow::Result<bool> {
-        let bin_path = pg_bin_dir.join("pg_isready");
-        let args = ["-h", "localhost", "-p", &format!("{}", self.postgres_port)];
-        let exitcode = Command::new(bin_path).args(args).spawn()?.wait().await?;
-
-        Ok(exitcode.success())
-    }
-
-    /// Create our database if it doesn't exist, and run migrations.
-    ///
-    /// This function is equivalent to the `diesel setup` command in the diesel CLI.  We implement
-    /// the same steps by hand to avoid imposing a dependency on installing diesel-cli for developers
-    /// who just want to run `cargo neon_local` without knowing about diesel.
-    ///
-    /// Returns the database url
-    pub async fn setup_database(&self) -> anyhow::Result<String> {
-        const DB_NAME: &str = "storage_controller";
-        let database_url = format!("postgresql://localhost:{}/{DB_NAME}", self.postgres_port);
-
-        let pg_bin_dir = self.get_pg_bin_dir().await?;
-        let createdb_path = pg_bin_dir.join("createdb");
-        let output = Command::new(&createdb_path)
-            .args([
-                "-h",
-                "localhost",
-                "-p",
-                &format!("{}", self.postgres_port),
-                DB_NAME,
-            ])
-            .output()
-            .await
-            .expect("Failed to spawn createdb");
-
-        if !output.status.success() {
-            let stderr = String::from_utf8(output.stderr).expect("Non-UTF8 output from createdb");
-            if stderr.contains("already exists") {
-                tracing::info!("Database {DB_NAME} already exists");
-            } else {
-                anyhow::bail!("createdb failed with status {}: {stderr}", output.status);
-            }
-        }
-
-        Ok(database_url)
-    }
-
-    pub async fn start(&self) -> anyhow::Result<()> {
-        // Start a vanilla Postgres process used by the storage controller for persistence.
-        let pg_data_path = Utf8PathBuf::from_path_buf(self.env.base_data_dir.clone())
-            .unwrap()
-            .join("storage_controller_db");
-        let pg_bin_dir = self.get_pg_bin_dir().await?;
-        let pg_log_path = pg_data_path.join("postgres.log");
-
-        if !tokio::fs::try_exists(&pg_data_path).await? {
-            // Initialize empty database
-            let initdb_path = pg_bin_dir.join("initdb");
-            let mut child = Command::new(&initdb_path)
-                .args(["-D", pg_data_path.as_ref()])
-                .spawn()
-                .expect("Failed to spawn initdb");
-            let status = child.wait().await?;
-            if !status.success() {
-                anyhow::bail!("initdb failed with status {status}");
-            }
-
-            tokio::fs::write(
-                &pg_data_path.join("postgresql.conf"),
-                format!("port = {}", self.postgres_port),
-            )
-            .await?;
-        };
-
-        println!("Starting storage controller database...");
-        let db_start_args = [
-            "-w",
-            "-D",
-            pg_data_path.as_ref(),
-            "-l",
-            pg_log_path.as_ref(),
-            "start",
-        ];
-
-        background_process::start_process(
-            "storage_controller_db",
-            &self.env.base_data_dir,
-            pg_bin_dir.join("pg_ctl").as_std_path(),
-            db_start_args,
-            [],
-            background_process::InitialPidFile::Create(self.postgres_pid_file()),
-            || self.pg_isready(&pg_bin_dir),
-        )
-        .await?;
-
-        // Run migrations on every startup, in case something changed.
-        let database_url = self.setup_database().await?;
-
-        let max_unavailable: humantime::Duration = NEON_LOCAL_MAX_UNAVAILABLE_INTERVAL.into();
-
-        let mut args = vec![
-            "-l",
-            &self.listen,
-            "-p",
-            self.path.as_ref(),
-            "--dev",
-            "--database-url",
-            &database_url,
-            "--max-unavailable-interval",
-            &max_unavailable.to_string(),
-        ]
-        .into_iter()
-        .map(|s| s.to_string())
-        .collect::<Vec<_>>();
-        if let Some(private_key) = &self.private_key {
-            let claims = Claims::new(None, Scope::PageServerApi);
-            let jwt_token =
-                encode_from_key_file(&claims, private_key).expect("failed to generate jwt token");
-            args.push(format!("--jwt-token={jwt_token}"));
-        }
-
-        if let Some(public_key) = &self.public_key {
-            args.push(format!("--public-key=\"{public_key}\""));
-        }
-
-        if let Some(control_plane_compute_hook_api) = &self.env.control_plane_compute_hook_api {
-            args.push(format!(
-                "--compute-hook-url={control_plane_compute_hook_api}"
-            ));
-        }
-
-        background_process::start_process(
-            COMMAND,
-            &self.env.base_data_dir,
-            &self.env.storage_controller_bin(),
-            args,
-            [(
-                "NEON_REPO_DIR".to_string(),
-                self.env.base_data_dir.to_string_lossy().to_string(),
-            )],
-            background_process::InitialPidFile::Create(self.pid_file()),
-            || async {
-                match self.ready().await {
-                    Ok(_) => Ok(true),
-                    Err(_) => Ok(false),
-                }
-            },
-        )
-        .await?;
-
-        Ok(())
-    }
-
-    pub async fn stop(&self, immediate: bool) -> anyhow::Result<()> {
-        background_process::stop_process(immediate, COMMAND, &self.pid_file())?;
-
-        let pg_data_path = self.env.base_data_dir.join("storage_controller_db");
-        let pg_bin_dir = self.get_pg_bin_dir().await?;
-
-        println!("Stopping storage controller database...");
-        let pg_stop_args = ["-D", &pg_data_path.to_string_lossy(), "stop"];
-        let stop_status = Command::new(pg_bin_dir.join("pg_ctl"))
-            .args(pg_stop_args)
-            .spawn()?
-            .wait()
-            .await?;
-        if !stop_status.success() {
-            let pg_status_args = ["-D", &pg_data_path.to_string_lossy(), "status"];
-            let status_exitcode = Command::new(pg_bin_dir.join("pg_ctl"))
-                .args(pg_status_args)
-                .spawn()?
-                .wait()
-                .await?;
-
-            // pg_ctl status returns this exit code if postgres is not running: in this case it is
-            // fine that stop failed.  Otherwise it is an error that stop failed.
-            const PG_STATUS_NOT_RUNNING: i32 = 3;
-            if Some(PG_STATUS_NOT_RUNNING) == status_exitcode.code() {
-                println!("Storage controller database is already stopped");
-                return Ok(());
-            } else {
-                anyhow::bail!("Failed to stop storage controller database: {stop_status}")
-            }
-        }
-
-        Ok(())
-    }
-
-    fn get_claims_for_path(path: &str) -> anyhow::Result<Option<Claims>> {
-        let category = match path.find('/') {
-            Some(idx) => &path[..idx],
-            None => path,
-        };
-
-        match category {
-            "status" | "ready" => Ok(None),
-            "control" | "debug" => Ok(Some(Claims::new(None, Scope::Admin))),
-            "v1" => Ok(Some(Claims::new(None, Scope::PageServerApi))),
-            _ => Err(anyhow::anyhow!("Failed to determine claims for {}", path)),
-        }
-    }
-
-    /// Simple HTTP request wrapper for calling into storage controller
-    async fn dispatch<RQ, RS>(
-        &self,
-        method: hyper::Method,
-        path: String,
-        body: Option<RQ>,
-    ) -> anyhow::Result<RS>
-    where
-        RQ: Serialize + Sized,
-        RS: DeserializeOwned + Sized,
-    {
-        // The configured URL has the /upcall path prefix for pageservers to use: we will strip that out
-        // for general purpose API access.
-        let listen_url = self.env.control_plane_api.clone().unwrap();
-        let url = Url::from_str(&format!(
-            "http://{}:{}/{path}",
-            listen_url.host_str().unwrap(),
-            listen_url.port().unwrap()
-        ))
-        .unwrap();
-
-        let mut builder = self.client.request(method, url);
-        if let Some(body) = body {
-            builder = builder.json(&body)
-        }
-        if let Some(private_key) = &self.private_key {
-            println!("Getting claims for path {}", path);
-            if let Some(required_claims) = Self::get_claims_for_path(&path)? {
-                println!("Got claims {:?} for path {}", required_claims, path);
-                let jwt_token = encode_from_key_file(&required_claims, private_key)?;
-                builder = builder.header(
-                    reqwest::header::AUTHORIZATION,
-                    format!("Bearer {jwt_token}"),
-                );
-            }
-        }
-
-        let response = builder.send().await?;
-        let response = response.error_from_body().await?;
-
-        Ok(response
-            .json()
-            .await
-            .map_err(pageserver_client::mgmt_api::Error::ReceiveBody)?)
-    }
-
-    /// Call into the attach_hook API, for use before handing out attachments to pageservers
-    #[instrument(skip(self))]
-    pub async fn attach_hook(
-        &self,
-        tenant_shard_id: TenantShardId,
-        pageserver_id: NodeId,
-    ) -> anyhow::Result<Option<u32>> {
-        let request = AttachHookRequest {
-            tenant_shard_id,
-            node_id: Some(pageserver_id),
-        };
-
-        let response = self
-            .dispatch::<_, AttachHookResponse>(
-                Method::POST,
-                "debug/v1/attach-hook".to_string(),
-                Some(request),
-            )
-            .await?;
-
-        Ok(response.gen)
-    }
-
-    #[instrument(skip(self))]
-    pub async fn inspect(
-        &self,
-        tenant_shard_id: TenantShardId,
-    ) -> anyhow::Result<Option<(u32, NodeId)>> {
-        let request = InspectRequest { tenant_shard_id };
-
-        let response = self
-            .dispatch::<_, InspectResponse>(
-                Method::POST,
-                "debug/v1/inspect".to_string(),
-                Some(request),
-            )
-            .await?;
-
-        Ok(response.attachment)
-    }
-
-    #[instrument(skip(self))]
-    pub async fn tenant_create(
-        &self,
-        req: TenantCreateRequest,
-    ) -> anyhow::Result<TenantCreateResponse> {
-        self.dispatch(Method::POST, "v1/tenant".to_string(), Some(req))
-            .await
-    }
-
-    #[instrument(skip(self))]
-    pub async fn tenant_locate(&self, tenant_id: TenantId) -> anyhow::Result<TenantLocateResponse> {
-        self.dispatch::<(), _>(
-            Method::GET,
-            format!("debug/v1/tenant/{tenant_id}/locate"),
-            None,
-        )
-        .await
-    }
-
-    #[instrument(skip(self))]
-    pub async fn tenant_migrate(
-        &self,
-        tenant_shard_id: TenantShardId,
-        node_id: NodeId,
-    ) -> anyhow::Result<TenantShardMigrateResponse> {
-        self.dispatch(
-            Method::PUT,
-            format!("control/v1/tenant/{tenant_shard_id}/migrate"),
-            Some(TenantShardMigrateRequest {
-                tenant_shard_id,
-                node_id,
-            }),
-        )
-        .await
-    }
-
-    #[instrument(skip(self), fields(%tenant_id, %new_shard_count))]
-    pub async fn tenant_split(
-        &self,
-        tenant_id: TenantId,
-        new_shard_count: u8,
-        new_stripe_size: Option<ShardStripeSize>,
-    ) -> anyhow::Result<TenantShardSplitResponse> {
-        self.dispatch(
-            Method::PUT,
-            format!("control/v1/tenant/{tenant_id}/shard_split"),
-            Some(TenantShardSplitRequest {
-                new_shard_count,
-                new_stripe_size,
-            }),
-        )
-        .await
-    }
-
-    #[instrument(skip_all, fields(node_id=%req.node_id))]
-    pub async fn node_register(&self, req: NodeRegisterRequest) -> anyhow::Result<()> {
-        self.dispatch::<_, ()>(Method::POST, "control/v1/node".to_string(), Some(req))
-            .await
-    }
-
-    #[instrument(skip_all, fields(node_id=%req.node_id))]
-    pub async fn node_configure(&self, req: NodeConfigureRequest) -> anyhow::Result<()> {
-        self.dispatch::<_, ()>(
-            Method::PUT,
-            format!("control/v1/node/{}/config", req.node_id),
-            Some(req),
-        )
-        .await
-    }
-
-    #[instrument(skip(self))]
-    pub async fn ready(&self) -> anyhow::Result<()> {
-        self.dispatch::<(), ()>(Method::GET, "ready".to_string(), None)
-            .await
-    }
-
-    #[instrument(skip_all, fields(%tenant_id, timeline_id=%req.new_timeline_id))]
-    pub async fn tenant_timeline_create(
-        &self,
-        tenant_id: TenantId,
-        req: TimelineCreateRequest,
-    ) -> anyhow::Result<TimelineInfo> {
-        self.dispatch(
-            Method::POST,
-            format!("v1/tenant/{tenant_id}/timeline"),
-            Some(req),
-        )
-        .await
-    }
-}

deny.toml

@@ -35,7 +35,6 @@ allow = [
     "Artistic-2.0",
     "BSD-2-Clause",
     "BSD-3-Clause",
-    "CC0-1.0",
     "ISC",
     "MIT",
     "MPL-2.0",
@@ -75,30 +74,10 @@ highlight = "all"
 workspace-default-features = "allow"
 external-default-features = "allow"
 allow = []
-
+deny = []
 skip = []
 skip-tree = []
 
-[[bans.deny]]
-# we use tokio, the same rationale applies for async-{io,waker,global-executor,executor,channel,lock}, smol
-# if you find yourself here while adding a dependency, try "default-features = false", ask around on #rust
-name = "async-std"
-
-[[bans.deny]]
-name = "async-io"
-
-[[bans.deny]]
-name = "async-waker"
-
-[[bans.deny]]
-name = "async-global-executor"
-
-[[bans.deny]]
-name = "async-executor"
-
-[[bans.deny]]
-name = "smol"
-
 # This section is considered when running `cargo deny check sources`.
 # More documentation about the 'sources' section can be found here:
 # https://embarkstudios.github.io/cargo-deny/checks/sources/cfg.html

diesel.toml

@@ -1,9 +0,0 @@
-# For documentation on how to configure this file,
-# see https://diesel.rs/guides/configuring-diesel-cli
-
-[print_schema]
-file = "control_plane/attachment_service/src/schema.rs"
-custom_type_derives = ["diesel::query_builder::QueryId"]
-
-[migrations_directory]
-dir = "control_plane/attachment_service/migrations"

docs/authentication.md

@@ -70,9 +70,6 @@ Should only be used e.g. for status check/tenant creation/list.
 Should only be used e.g. for status check.
 Currently also used for connection from any pageserver to any safekeeper.
 
-"generations_api": Provides access to the upcall APIs served by the storage controller or the control plane.
-
-"admin": Provides access to the control plane and admin APIs of the storage controller.
 
 ### CLI
 CLI generates a key pair during call to `neon_local init` with the following commands:

docs/docker.md

@@ -21,7 +21,7 @@ We build all images after a successful `release` tests run and push automaticall
 
 ## Docker Compose example
 
-You can see a [docker compose](https://docs.docker.com/compose/) example to create a neon cluster in [/docker-compose/docker-compose.yml](/docker-compose/docker-compose.yml). It creates the following containers.
+You can see a [docker compose](https://docs.docker.com/compose/) example to create a neon cluster in [/docker-compose/docker-compose.yml](/docker-compose/docker-compose.yml). It creates the following conatainers.
 
 - pageserver x 1
 - safekeeper x 3
@@ -38,7 +38,7 @@ You can specify version of neon cluster using following environment values.
 - TAG: the tag version of [docker image](https://registry.hub.docker.com/r/neondatabase/neon/tags) (default is latest), which is tagged in [CI test](/.github/workflows/build_and_test.yml)
 ```
 $ cd docker-compose/
-$ docker-compose down   # remove the containers if exists
+$ docker-compose down   # remove the conainers if exists
 $ PG_VERSION=15 TAG=2937 docker-compose up --build -d  # You can specify the postgres and image version
 Creating network "dockercompose_default" with the default driver
 Creating docker-compose_storage_broker_1       ... done

docs/pageserver-storage.md

@@ -64,7 +64,7 @@ Storage.
 
 The LayerMap tracks what layers exist in a timeline.
 
-Currently, the layer map is just a resizable array (Vec). On a GetPage@LSN or
+Currently, the layer map is just a resizeable array (Vec). On a GetPage@LSN or
 other read request, the layer map scans through the array to find the right layer
 that contains the data for the requested page. The read-code in LayeredTimeline
 is aware of the ancestor, and returns data from the ancestor timeline if it's

docs/pageserver-thread-mgmt.md

@@ -22,7 +22,7 @@ timeline to shutdown. It will also wait for them to finish.
 
 A task registered in the task registry can check if it has been
 requested to shut down, by calling `is_shutdown_requested()`. There's
-also a `shutdown_watcher()` Future that can be used with `tokio::select!`
+also a `shudown_watcher()` Future that can be used with `tokio::select!`
 or similar, to wake up on shutdown.
 
 

docs/pageserver-walredo.md

@@ -74,4 +74,4 @@ somewhat wasteful, but because most WAL records only affect one page,
 the overhead is acceptable.
 
 The WAL redo always happens for one particular page. If the WAL record
-contains changes to other pages, they are ignored.
+coantains changes to other pages, they are ignored.