A sizeof on a pointer on a 64 bit machine is 8 bytes whereas
Entry::old_name is a 64 byte array of characters. There was most likely
no fallout since the string would start with NUL bytes, but best to fix
nonetheless.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
Filling the gap in with zeroes is annoying for sharded ingest. We are
not sure it even happens in reality.
## Summary of Changes
Add one global counter which tracks how many such gap blocks we filled
on relation extends. We can add more metrics once we understand the
scope.
## Problem
Occasionally, we get failures to start the storage controller's db with
errors like:
```
aborting due to panic at /__w/neon/neon/control_plane/src/background_process.rs:349:67:
claim pid file: lock file
Caused by:
file is already locked
```
e.g.
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9428/11380574562/index.html#/testresult/1c68d413ea9ecd4a
This is happening in a stop,start cycle during a test. Presumably the
pidfile from the startup background process is still held at the point
we stop, because we let pg_ctl keep running in the background.
## Summary of changes
- Refactor pg_ctl invocations into a helper
- In the controller's `start` function, use pg_ctl & a wait loop for
pg_isready, instead of using background_process
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
We can't call pg_current_wal_lsn() if we are a standby instance (read
replica). Any attempt to call this function while in recovery results
in:
ERROR: recovery is in progress
Signed-off-by: Tristan Partin <tristan@neon.tech>
similar to https://github.com/neondatabase/neon/pull/8841, we make the
delta layer writer atomic when finishing the layers.
## Summary of changes
* `put_value` not taking discard fn anymore
* `finish` decides what layers to keep
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Persist timeline offloaded state to S3.
Right now, as of #8907, at each restart of the pageserver, all offloaded
state is lost, so we load the full timeline again. As it starts with an
empty local directory, we might potentially download some files again,
leading to downloads that are ultimately wasteful.
This patch adds support for persisting the offloaded state, allowing us
to never load offloaded timelines in the first place. The persistence
feature is facilitated via a new file in S3 that is tenant-global, which
contains a list of all offloaded timelines. It is updated each time we
offload or unoffload a timeline, and otherwise never touched.
This choice means that tenants where no offloading is happening will not
immediately get a manifest, keeping the change very minimal at the
start.
We leave generation support for future work. It is important to support
generations, as in the worst case, the manifest might be overwritten by
an older generation after a timeline has been unoffloaded (and
unarchived), so the next pageserver process instantiation might wrongly
believe that some timeline is still offloaded even though it should be
active.
Part of #9386, #8088
## Problem
If the environment variables `COMPATIBILITY_NEON_BIN` or
`COMPATIBILITY_POSTGRES_DISTRIB_DIR` are not set (this is usual during a
local run), the tests with the versions mix cannot run.
## Summary of changes
If these variables are not set turn off the version mix.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Previously, figuring out how many tenant shards were managed by a
storage controller was typically done by peeking at the database or
calling into the API. A metric makes it easier to monitor, as
unexpectedly increasing shard counts can be indicative of problems
elsewhere in the system.
## Summary of changes
- Add metrics `storage_controller_pageserver_nodes` (updated on node
CRUD operations from Service) and `storage_controller_tenant_shards`
(updated RAII-style from TenantShard)
At least as far as removing individual files goes, this is the best
pattern for removing. I can't say the same for removing directories, but
I went ahead and changed those to `$(RM) -r` anyway.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Always do timeline init through atomic rename of temp directory. Add
GlobalTimelines::load_temp_timeline which does this, and use it from
both pull_timeline and basic timeline creation. Fixes a collection
of issues:
- previously timeline creation didn't really flushed cfile to disk
due to 'nothing to do if state didn't change' check;
- even if it did, without tmp dir it is possible to lose the cfile
but leave timeline dir in place, making it look corrupted;
- tenant directory creation fsync was missing in timeline creation;
- pull_timeline is now protected from concurrent both itself and
timeline creation;
- now global timelines map entry got special CreationInProgress
entry type which prevents from anyone getting access to timeline
while it is being created (previously one could get access to it,
but it was locked during creation, which is valid but confusing if
creation failed).
fixes#8927
Add a way to list the offloaded timelines.
Before, one had to look at logs to figure out if a timeline has been
offloaded or not, or use the non-presence of a certain timeline in the
list of normal timelines. Now, one can list them directly.
Part of #8088
Part of #8130
## Problem
Pageserver previously goes through the kernel page cache for all the
IOs. The kernel page cache makes light-loaded pageserver have deceptive
fast performance. Using direct IO would offer predictable latencies of
our virtual file IO operations.
In particular for reads, the data pages also have an extremely low
temporal locality because the most frequently accessed pages are cached
on the compute side.
## Summary of changes
This PR enables pageserver to use direct IO for delta layer and image
layer reads. We can ship them separately because these layers are
write-once, read-many, so we will not be mixing buffered IO with direct
IO.
- implement `IoBufferMut`, an buffer type with aligned allocation
(currently set to 512).
- use `IoBufferMut` at all places we are doing reads on image + delta
layers.
- leverage Rust type system and use `IoBufAlignedMut` marker trait to
guarantee that the input buffers for the IO operations are aligned.
- page cache allocation is also made aligned.
_* in-memory layer reads and the write path will be shipped separately._
## Testing
Integration test suite run with O_DIRECT enabled:
https://github.com/neondatabase/neon/pull/9350
## Performance
We evaluated performance based on the `get-page-at-latest-lsn`
benchmark. The results demonstrate a decrease in the number of IOps, no
sigificant change in the latency mean, and an slight improvement on the
p99.9 and p99.99 latencies.
[Benchmark](https://www.notion.so/neondatabase/Benchmark-O_DIRECT-for-image-and-delta-layers-2024-10-01-112f189e00478092a195ea5a0137e706?pvs=4)
## Rollout
We will add `virtual_file_io_mode=direct` region by region to enable
direct IO on image + delta layers.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Part of https://github.com/neondatabase/neon/issues/8836
## Summary of changes
This pull request makes the image layer split writer atomic when
finishing the layers. All the produced layers either finish at the same
time, or discard at the same time. Note that this does not prevent
atomicity when crash, but anyways, it will be cleaned up on pageserver
restart.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
```
+ /tmp/neon/pg_install/v16/bin/psql '***' -c 'SELECT version()'
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /tmp/neon/pg_install/v16/bin/psql)
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by /tmp/neon/pg_install/v16/bin/psql)
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /tmp/neon/pg_install/v16/lib/libpq.so.5)
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /tmp/neon/pg_install/v16/lib/libpq.so.5)
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by /tmp/neon/pg_install/v16/lib/libpq.so.5)
```
## Summary of changes
- Use `build-tools:pinned-bookworm` whenever we download Neon artefact
## Problem
Our dockerfiles, for some historical reason, have unconventional names
`Dockerfile.<something>`, and some tools (like GitHub UI) fail to highlight
the syntax in them.
> Some projects may need distinct Dockerfiles for specific purposes. A
common convention is to name these `<something>.Dockerfile`
From: https://docs.docker.com/build/concepts/dockerfile/#filename
## Summary of changes
- Rename `Dockerfile.build-tools` -> `build-tools.Dockerfile`
- Rename `compute/Dockerfile.compute-node` ->
`compute/compute-node.Dockerfile`
In #9453, we want to remove the non-gzipped basebackup code in the
computes, and always request gzipped basebackups.
However, right now the pageserver's page service only accepts basebackup
requests in the following formats:
* `basebackup <tenant_id> <timeline_id>`, lsn is determined by the
pageserver as the most recent one (`timeline.get_last_record_rlsn()`)
* `basebackup <tenant_id> <timeline_id> <lsn>`
* `basebackup <tenant_id> <timeline_id> <lsn> --gzip`
We add a fourth case, `basebackup <tenant_id> <timeline_id> --gzip` to
allow gzipping the request for the latest lsn as well.
In neon_collector_autoscaling.jsonnet, the collector name is hardcoded
to neon_collector_autoscaling. This issue manifests itself such that
sql_exporter would not find the collector configuration.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
Pageserver returns 409 (Conflict) if any of the shards are already
deleting the timeline. This resulted in an error being propagated out of
the HTTP handler and to the client. It's an expected scenario so we
should handle it nicely.
This caused failures in `test_storage_controller_smoke`
[here](https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9435/11390431900/index.html#suites/8fc5d1648d2225380766afde7c428d81/86eee4b002d6572d).
## Summary of Changes
Instead of returning an error on 409s, we now bubble the status code up
and let the HTTP handler code retry until it gets a 404 or times out.
Follow up on #9344. We want to install the extension automatically. We
didn't want to couple the extension into compute_ctl so instead
local_proxy is the one to issue requests specific to the extension.
depends on #9344 and #9395
## Problem
Consider the following sequence of events:
1. Shard location gets downgraded to secondary while there's a libpq
connection in pagestream mode from the compute
2. There's no active tenant, so we return `QueryError::Reconnect` from
`PageServerHandler::handle_get_page_at_lsn_request`.
3. Error bubbles up to `PostgresBackendIO::process_message`, bailing us
out of pagestream mode.
4. We instruct the client to reconnnect, but continue serving the libpq
connection. The client isn't yet aware of the request to reconnect and
believes it is still in pagestream mode. Pageserver fails to deserialize
get page requests wrapped in `CopyData` since it's not in pagestream
mode.
## Summary of Changes
When we wish to instruct the client to reconnect, also disconnect from
the server side after flushing the error.
Closes https://github.com/neondatabase/cloud/issues/17336
Adds endpoint to install extensions:
**POST** `/extensions`
```
{"extension":"pg_sessions_jwt","database":"neondb","version":"1.0.0"}
```
Will be used by `local-proxy`.
Example, for the JWT authentication to work the database needs to have
the pg_session_jwt extension and also to enable JWT to work in RLS
policies.
---------
Co-authored-by: Conrad Ludgate <conradludgate@gmail.com>
## Problem
If we migrate A->B, then B->A, and the notification of A->B fails, then
we might have retained state that makes us think "A" is the last state
we sent to the compute hook, whereas when we migrate B->A we should
really be sending a fresh notification in case our earlier failed
notification has actually mutated the remote compute config.
Closes: #9417
## Summary of changes
- Add a reproducer for the bug
(`test_storage_controller_compute_hook_revert`)
- Refactor compute hook code to represent remote state with
`ComputeRemoteState` which stores a boolean for whether the compute has
fully applied the change as well as the request that the compute
accepted.
- The actual bug fix: after sending a compute notification, if we got a
423 response then update our ComputeRemoteState to reflect that we have
mutated the remote state. This way, when we later try and notify for our
historic location, we will properly see that as a change and send the
notification.
Co-authored-by: Vlad Lazar <vlad@neon.tech>
This PR introduces a `/grants` endpoint which allows setting specific
`privileges` to certain `role` for a certain `schema`.
Related to #9344
Together these endpoints will be used to configure JWT extension and set
correct usage to its schema to specific roles that will need them.
---------
Co-authored-by: Conrad Ludgate <conradludgate@gmail.com>
The forever ongoing effort of juggling multiple versions of rustls :3
now with new crypto library aws-lc.
Because of dependencies, it is currently impossible to not have both
ring and aws-lc in the dep tree, therefore our only options are not
updating rustls or having both crypto backends enabled...
According to benchmarks run by the rustls maintainer, aws-lc is faster
than ring in some cases too <https://jbp.io/graviola/>, so it's not
without its upsides,
## Problem
The pageserver generally trusts the storage controller/control plane to
give it valid generations. However, sometimes it should be obvious that
a generation is bad, and for defense in depth we should detect that on
the pageserver.
This PR is part 1 of 2:
1. in this PR we detect and warn on such situations, but do not block
starting up the tenant. Once we have confidence that the check is not
firing unexpectedly in the field
2. part 2 of 2 will introduce a condition that refuses to start a tenant
in this situtation, and a test for that (maybe, if we can figure out how
to spoof an ancient mtime)
Related: #6951
## Summary of changes
- When loading an index older than 2 weeks, log an INFO message noting
that we will check for other indices
- When loading an index older than 2 weeks _and_ a newer-generation
index exists, log a warning.
Part of the aux v1 retirement
https://github.com/neondatabase/neon/issues/8623
## Summary of changes
Remove write/read path for aux v1, but keeping the config item and the
index part field for now.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Simple PR to log installed_extensions statistics.
in the following format:
```
2024-10-17T13:53:02.860595Z INFO [NEON_EXT_STAT] {"extensions":[{"extname":"plpgsql","versions":["1.0"],"n_databases":2},{"extname":"neon","versions":["1.5"],"n_databases":1}]}
```
## Problem
In #9259, we found that the `check_safekeepers_synced` fast path could
result in a lower basebackup LSN than the `flush_lsn` reported by
Safekeepers in `VoteResponse`, causing the compute to panic once on
startup.
This would happen if the Safekeeper had unflushed WAL records due to a
compute disconnect. The `TIMELINE_STATUS` query would report a
`flush_lsn` below these unflushed records, while `VoteResponse` would
flush the WAL and report the advanced `flush_lsn`. See
https://github.com/neondatabase/neon/issues/9259#issuecomment-2410849032.
## Summary of changes
Flush the WAL if the compute disconnects during WAL processing.
## Problem
Tenant deletion only removes the current shards from remote storage. Any
stale parent shards (before splits) will be left behind. These shards
are kept since child shards may reference data from the parent until new
image layers are generated.
## Summary of changes
* Document a special case for pageserver tenant deletion that deletes
all shards in remote storage when given an unsharded tenant ID, as well
as any unsharded tenant data.
* Pass an unsharded tenant ID to delete all remote storage under the
tenant ID prefix.
* Split out `RemoteStorage::delete_prefix()` to delete a bucket prefix,
with additional test coverage.
* Add a `delimiter` argument to `asset_prefix_empty()` to support
partial prefix matches (i.e. all shards starting with a given tenant
ID).
part of https://github.com/neondatabase/neon/issues/9114
## Summary of changes
gc-compaction may take a lot of disk space, and if it does, the caller
should do a partial gc-compaction. This patch adds space check for the
compaction job.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Adds a configuration variable for timeline offloading support. The added
pageserver-global config option controls whether the pageserver
automatically offloads timelines during compaction.
Therefore, already offloaded timelines are not affected by this, nor is
the manual testing endpoint.
This allows the rollout of timeline offloading to be driven by the
storage team.
Part of #8088
First PR for #9284
Start unification of the client and connection pool interfaces:
- Exclude the 'global_connections_count' out from the get_conn_entry()
- Move remote connection pools to the conn_pool_lib as a reference
- Unify clients among all the conn pools
## Problem
While running `find-garbage` and `purge-garbage`, I encountered two
things that needed updating:
- Console API may omit `user_id` since org accounts were added
- When we cut over to using GenericRemoteStorage, the object listings we
do during purge did not get proper retry handling, so could easily fail
on usual S3 errors, and make the whole process drop out.
...and one bug:
- We had a `.unwrap` which expects that after finding an object in a
tenant path, a listing in that path will always return objects. This is
not true, because a pageserver might be deleting the path at the same
time as we scan it.
## Summary of changes
- When listing objects during purge, use backoff::retry
- Make `user_id` an `Option`
- Handle the case where a tenant's objects go away during find-garbage.
## Problem
See
https://neondb.slack.com/archives/C033A2WE6BZ/p1729007738526309?thread_ts=1722942856.987979&cid=C033A2WE6BZ
When replica receives WAL record which target page is not present in
shared buffer, we evict this page from LFC.
If all pages from the LFC chunk are evicted, then chunk is moved to the
beginning of LRU least to force it reuse.
Unfortunately access_count is not checked and if the entry is access at
this moment then this operation can cause LRU list corruption.
## Summary of changes
Check `access_count` in `lfc_evict`
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Checkpointer related statistics moved from pg_stat_bgwriter to
pg_stat_checkpointer, so we need to adjust our queries accordingly.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Bad copy-paste seemingly. This manifested itself as a failure to start
for the sql_exporter, and was just dying on loop in staging. A future PR
will have E2E testing of sql_exporter.
Signed-off-by: Tristan Partin <tristan@neon.tech>
```
warning: first doc comment paragraph is too long
--> compute_tools/src/installed_extensions.rs:35:1
|
35 | / /// Connect to every database (see list_dbs above) and get the list of installed extensions.
36 | | /// Same extension can be installed in multiple databases with different versions,
37 | | /// we only keep the highest and lowest version across all databases.
| |_
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_long_first_doc_paragraph
= note: `#[warn(clippy::too_long_first_doc_paragraph)]` on by default
help: add an empty line
|
35 ~ /// Connect to every database (see list_dbs above) and get the list of installed extensions.
36 + ///
|
```
part of https://github.com/neondatabase/neon/issues/9255
## Summary of changes
Upgrade remote_storage crate to use hyper1. Hyper0 is used when
providing the streaming HTTP body to the s3 SDK, and it is refactored to
use hyper1.
Signed-off-by: Alex Chi Z <chi@neon.tech>
The current code has forgotten to activate timelines during unoffload,
leading to inability to receive the basebackup, due to the timeline
still being in loading state.
```
stderr:
command failed: compute startup failed: failed to get basebackup@0/0 from pageserver postgresql://no_user@localhost:15014
Caused by:
0: db error: ERROR: Not found: Timeline 508546c79b2b16a84ab609fdf966e0d3/bfc18c24c4b837ecae5dbb5216c80fce is not active, state: Loading
1: ERROR: Not found: Timeline 508546c79b2b16a84ab609fdf966e0d3/bfc18c24c4b837ecae5dbb5216c80fce is not active, state: Loading
```
Therefore, also activate the timeline during unoffloading.
Part of #8088
## Problem
The reconciler use `seq`, but processing of results uses `sequence`.
Order is different too. It makes it annoying to read logs.
## Summary of Changes
Use the same tracing fields in both
## Problem
In test `test_timeline_offloading`, we see failures like:
```
PageserverApiException: queue is in state Stopped
```
Example failure:
https://neon-github-public-dev.s3.amazonaws.com/reports/main/11356917668/index.html#testresult/ff0e348a78a974ee/retries
## Summary of changes
- Amend code paths that handle errors from RemoteTimelineClient to check
for cancellation and emit the Cancelled error variant in these cases
(will give clients a 503 to retry)
- Remove the implicit `#[from]` for the Other error case, to make it
harder to add code that accidentally squashes errors into this
(500-equivalent) error variant.
This would be neater if we made RemoteTimelineClient return a structured
error instead of anyhow::Error, but that's a bigger refactor.
I'm not sure if the test really intends to hit this path, but the error
handling fix makes sense either way.
This should make it a little bit easier for people wanting to check if
their files are formated correctly. Has the added bonus of making the CI
check simpler as well.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Our replication bench project is stuck because it is too slow to
generate basebackup and it caused compute to disconnect.
https://neondb.slack.com/archives/C03438W3FLZ/p1728330685012419
The compute timeout for waiting for basebackup is 10m (is it true?).
Generating basebackup directly on pageserver takes ~3min. Therefore, I
suspect it's because there are too many wasted round-trip time for
writing the 10000+ snapshot aux files. Also, it is possible that the
basebackup process takes too long time retrieving all aux files that it
did not write anything over the wire protocol, causing a read timeout.
Basebackup size is 800KB gzipped for that project and was 55MB tar
before compression.
## Summary of changes
* Potentially fix the issue by placing a write buffer for basebackup.
* Log how many aux files did we read + the time spent on it.
Signed-off-by: Alex Chi Z <chi@neon.tech>
There are quite a few benefits to this approach:
- Reduce config duplication
- The two sql_exporter configs were super similar with just a few
differences
- Pull SQL queries into standalone files
- That means we could run a SQL formatter on the file in the future
- It also means access to syntax highlighting
- In the future, run different queries for different PG versions
- This is relevant because right now, we have queries that are failing
on PG 17 due to catalog updates
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
There is double update of resize cache in `put_rel_truncation`
Also `page_server_request` contains check that fork is MAIN_FORKNUM
which
1. is incorrect (because Vm/FSM pages are shreded in the same way as
MAIN fork pages and
2. is redundant because `page_server_request` is never called for `get
page` request so first part to OR condition is always true.
## Summary of changes
Remove redundant code
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Add a test for timeline offloading, and subsequent unoffloading.
Also adds a manual endpoint, and issues a proper timeline shutdown
during offloading which prevents a pageserver hang at shutdown.
Part of #8088.
## Problem
We were seeing timeouts on migrations in this test.
The test unfortunately tends to saturate local storage, which is shared
between the pageservers and the control plane database, which makes the
test kind of unrealistic. We will also want to increase the scale of
this test, so it's worth fixing that.
## Summary of changes
- Instead of randomly creating timelines at the same time as the other
background operations, explicitly identify a subset of tenant which will
have timelines, and create them at the start. This avoids pageservers
putting a lot of load on the test node during the main body of the test.
- Adjust the tenants created to create some number of 8 shard tenants
and the rest 1 shard tenants, instead of just creating a lot of 2 shard
tenants.
- Use archival_config to exercise tenant-mutating operations, instead of
using timeline creation for this.
- Adjust reconcile_until_idle calls to avoid waiting 5 seconds between
calls, which causes timelines with large shard count tenants.
- Fix a pageserver bug where calls to archival_config during activation
get 404
## Problem
This PR switches CI and Storage to Debain 12 (Bookworm) based images.
## Summary of changes
- Add Debian codename (`bookworm`/`bullseye`) to most of docker tags,
create un-codenamed images to be used by default
- `vm-compute-node-image`: create a separate spec for `bookworm` (we
don't need to build cgroups in the future)
- `neon-image`: Switch to `bookworm`-based `build-tools` image
- Storage components and Proxy use it
- CI: run lints and tests on `bookworm`-based `build-tools` image
We now also track:
- Number of PS IOs in-flight
- Number of pages cached by smgr prefetch implementation
- IO timing histograms for LFC reads and writes, per IO issued
## Problem
There's little insight into the timing metrics of LFC, and what the
prefetch state of each backend is.
This changes that, by measuring (and subsequently exposing) these data
points.
## Summary of changes
- Extract IOHistogram as separate type, rather than a collection of
fields on NeonMetrics
- others, see items above.
Part of https://github.com/neondatabase/neon/issues/8926
Also consider offloaded timelines for obtaining `retain_lsn`. This is
required for correctness for all timelines that have not been flattened
yet: otherwise we GC data that might still be required for reading.
This somewhat counteracts the original purpose of timeline offloading of
not having to iterate over offloaded timelines, but sadly it's required.
In the future, we can improve the way the offloaded timelines are
stored.
We also make the `retain_lsn` optional so that in the future, when we
implement flattening, we can make it None. This also applies to full
timeline objects by the way, where it would probably make most sense to
add a bool flag whether the timeline is successfully flattened, and if
it is, one can exclude it from `retain_lsn` as well.
Also, track whether a timeline was offloaded or not in `retain_lsn` so
that the `retain_lsn` can be excluded from visibility and size
calculation.
Part of #8088
Adds a test for the (now fixed) storage broker limit issue, see #9268
for the description and #9299 for the fix.
Also fix a race condition with endpoint creation/starts running in parallel,
leading to file not found errors.
## Problem
When `Dockerfile.build-tools` gets changed, several PRs catch up with
it and some might get unexpectedly cancelled workflows because of
GitHub's concurrency model for workflows.
See the comment in the code for more details.
It should be possible to revert it after
https://github.com/orgs/community/discussions/41518 (I don't expect it
anytime soon, but I subscribed)
## Summary of changes
- Do not queue `build-build-tools-image` workflows in the concurrency
group
## Problem
At MacOS `pg_dynshmem` file is create in PGDATADIR which cause mismatch
in directories comparison
## Summary of changes
Add this files to the ignore list.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
removes the ConsoleRedirect backend from the main auth::Backends enum,
copy-paste the existing crate::proxy::task_main structure to use the
ConsoleRedirectBackend exclusively.
This makes the logic a bit simpler at the cost of some fairly trivial
code duplication.
preliminary for #9270
The auth::Backend didn't need to be in the mega ProxyConfig object, so I
split it off and passed it manually in the few places it was necessary.
I've also refined some of the uses of config I saw while doing this
small refactor.
I've also followed the trend and make the console redirect backend it's
own struct, same as LocalBackend and ControlPlaneBackend.
## Problem
Action `run-python-test-set` fails if it is not used for `regress_tests`
on release PR, because it expects
`test_compatibility.py::test_create_snapshot` to generate a snapshot,
and the test exists only in `regress_tests` suite.
For example, in https://github.com/neondatabase/neon/pull/9291
[`test-postgres-client-libs`](https://github.com/neondatabase/neon/actions/runs/11209615321/job/31155111544)
job failed.
## Summary of changes
- Add `skip-if-does-not-exist` input to `.github/actions/upload` action
(the same way we do for `.github/actions/download`)
- Set `skip-if-does-not-exist=true` for "Upload compatibility snapshot"
step in `run-python-test-set` action
## Problem
We faced the problem of incompatibility of the different components of
different versions.
This should be detected automatically to prevent production bugs.
## Summary of changes
The test for this situation was implemented
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Fixes#8340
## Summary of changes
Introduced ErrorKind::quota to handle quota-related errors
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
This job takes an extraordinary amount of time for what I understand it
to do. The obvious win is caching dependencies.
Rory disabled caching in cd5732d9d8.
I assume this was to get gen3 runners up and running.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
This test restarts services in an undefined order (whatever neon_local
does), which means we should be tolerant of warnings that come from
restarting the storage controller while a pageserver is running.
We can see failures with warnings from dropped requests, e.g.
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9307/11229000712/index.html#/testresult/d33d5cb206331e28
```
WARN request{method=GET path=/v1/location_config request_id=b7dbda15-6efb-4610-8b19-a3772b65455f}: request was dropped before completing\n')
```
## Summary of changes
- allow-list the `request was dropped before completing` message on
pageservers before restarting services
When there are no timelines in remote storage, the storage scrubber
would incorrectly trip an assertion with "Must be set if results are
present", referring to the last processed tenant ID. When there are no
timelines we don't expect there to be a tenant ID either.
The assertion was introduced in 37aa6fd.
Only apply the assertion when any timelines are present.
## Problem
Storage controller `/control` API mostly requires admin tokens, for
interactive use by engineers. But for endpoints used by scripts, we
should not require admin tokens.
Discussion at
https://neondb.slack.com/archives/C033RQ5SPDH/p1728550081788989?thread_ts=1728548232.265019&cid=C033RQ5SPDH
## Summary of changes
- Introduce the 'infra' JWT scope, which was not previously used in the
neon repo
- For pageserver & safekeeper node registrations, require infra scope
instead of admin
Note that admin will still work, as the controller auth checks permit
admin tokens for all endpoints irrespective of what scope they require.
This seems to paper over a behavioral difference in Python 3.9 and
Python 3.12 with how dataclasses work with mutable variables. On Python
3.12, I get the following error:
ValueError: mutable default <class 'dict'> for field EXTRACTORS is not allowed: use default_factory
This obviously doesn't occur in our testing environment. When I do what
the error tells me, EXTRACTORS doesn't seem to exist as an attribute on
the class in at least Python 3.9.
The solution provided in this commit seems like the least amount of
friction to keep the wheels turning.
Signed-off-by: Tristan Partin <tristan@neon.tech>
This is simpler than using subprocess.
One difference is in how moto's log output is now collected. Previously,
moto's logs went to stderr, and were collected and printed at the end of
the test by pytest, like this:
2024-10-07T22:45:12.3705222Z ----------------------------- Captured stderr call -----------------------------
2024-10-07T22:45:12.3705577Z 127.0.0.1 - - [07/Oct/2024 22:35:14] "PUT /pageserver-test-deletion-queue-2e6efa8245ec92a37a07004569c29eb7 HTTP/1.1" 200 -
2024-10-07T22:45:12.3706181Z 127.0.0.1 - - [07/Oct/2024 22:35:15] "GET /pageserver-test-deletion-queue-2e6efa8245ec92a37a07004569c29eb7/?list-type=2&delimiter=/&prefix=/tenants/43da25eac0f41412696dd31b94dbb83c/timelines/ HTTP/1.1" 200 -
2024-10-07T22:45:12.3706894Z 127.0.0.1 - - [07/Oct/2024 22:35:16] "PUT /pageserver-test-deletion-queue-2e6efa8245ec92a37a07004569c29eb7//tenants/43da25eac0f41412696dd31b94dbb83c/timelines/eabba5f0c1c72c8656d3ef1d85b98c1d/initdb.tar.zst?x-id=PutObject HTTP/1.1" 200 -
Note the timestamps: the timestamp at the beginning of the line is the
time that the stderr was dumped, i.e. the end of the test, which makes
those timestamps rather useless. The timestamp in the middle of the line
is when the operation actually happened, but it has only 1 s
granularity.
With this change, moto's log lines are printed in the "live log call"
section, as they happen, which makes the timestamps more useful:
2024-10-08 12:12:31.129 INFO [_internal.py:97] 127.0.0.1 - - [08/Oct/2024 12:12:31] "GET /pageserver-test-deletion-queue-e24e7525d437e1874d8a52030dcabb4f/?list-type=2&delimiter=/&prefix=/tenants/7b6a16b1460eda5204083fba78bc360f/timelines/ HTTP/1.1" 200 -
2024-10-08 12:12:32.612 INFO [_internal.py:97] 127.0.0.1 - - [08/Oct/2024 12:12:32] "PUT /pageserver-test-deletion-queue-e24e7525d437e1874d8a52030dcabb4f//tenants/7b6a16b1460eda5204083fba78bc360f/timelines/7ab4c2b67fa8c712cada207675139877/initdb.tar.zst?x-id=PutObject HTTP/1.1" 200 -
## Problem
We need a way to incrementally switch to direct IO. During the rollout
we might want to switch to O_DIRECT on image and delta layer read path
first before others.
## Summary of changes
- Revisited and simplified direct io config in `PageserverConf`.
- We could add a fallback mode for open, but for read there isn't a
reasonable alternative (without creating another buffered virtual file).
- Added a wrapper around `VirtualFile`, current implementation become
`VirtualFileInner`
- Use `open_v2`, `create_v2`, `open_with_options_v2` when we want to use
the IO mode specified in PS config.
- Once we onboard all IO through VirtualFile using this new API, we will
delete the old code path.
- Make io mode live configurable for benchmarking.
- Only guaranteed for files opened after the config change, so do it
before the experiment.
As an example, we are using `open_v2` with
`virtual_file::IoMode::Direct` in
https://github.com/neondatabase/neon/pull/9169
We also remove `io_buffer_alignment` config in
a04cfd754b and use it as a compile time
constant. This way we don't have to carry the alignment around or make
frequent call to retrieve this information from the static variable.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Add /installed_extensions endpoint to collect
statistics about extension usage.
It returns a list of installed extensions in the format:
```json
{
"extensions": [
{
"extname": "extension_name",
"versions": ["1.0", "1.1"],
"n_databases": 5,
}
]
}
```
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
The path to TPC-H queries was incorrectly changed in #9306.
This path is used for `test_tpch` parameterization, so all perf tests
started to fail:
```
==================================== ERRORS ====================================
__________ ERROR collecting test_runner/performance/test_perf_olap.py __________
test_runner/performance/test_perf_olap.py:205: in <module>
@pytest.mark.parametrize("query", tpch_queuies())
test_runner/performance/test_perf_olap.py:196: in tpch_queuies
assert queries_dir.exists(), f"TPC-H queries dir not found: {queries_dir}"
E AssertionError: TPC-H queries dir not found: /__w/neon/neon/test_runner/performance/performance/tpc-h/queries
E assert False
E + where False = <bound method Path.exists of PosixPath('/__w/neon/neon/test_runner/performance/performance/tpc-h/queries')>()
E + where <bound method Path.exists of PosixPath('/__w/neon/neon/test_runner/performance/performance/tpc-h/queries')> = PosixPath('/__w/neon/neon/test_runner/performance/performance/tpc-h/queries').exists
```
## Summary of changes
- Fix the path to tpc-h queries
## Problem
Previously, observed state updates from the reconciler may have
clobbered inline changes made to the observed state by other code paths.
## Summary of changes
Model observed state changes from reconcilers as deltas. This means that
we only update what has changed. Handling for node going off-line concurrently
during the reconcile is also added: set observed state to None in such cases to
respect the convention.
Closes https://github.com/neondatabase/neon/issues/9124
Instead of printing the full absolute path for every file, print just
the filenames.
Before:
2024-10-08 13:19:39.98 INFO [test_pageserver_generations.py:669] Found file /home/heikki/git-sandbox/neon/test_output/test_upgrade_generationless_local_file_paths[debug-pg16]/repo/pageserver_1/tenants/0c04a8df7691a367ad0bb1cc1373ba4d/timelines/f41022551e5f96ce8dbefb9b5d35ab45/000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0-v1-00000001
2024-10-08 13:19:39.99 INFO [test_pageserver_generations.py:673] Renamed /home/heikki/git-sandbox/neon/test_output/test_upgrade_generationless_local_file_paths[debug-pg16]/repo/pageserver_1/tenants/0c04a8df7691a367ad0bb1cc1373ba4d/timelines/f41022551e5f96ce8dbefb9b5d35ab45/000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0-v1-00000001 -> /home/heikki/git-sandbox/neon/test_output/test_upgrade_generationless_local_file_paths[debug-pg16]/repo/pageserver_1/tenants/0c04a8df7691a367ad0bb1cc1373ba4d/timelines/f41022551e5f96ce8dbefb9b5d35ab45/000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0
After:
2024-10-08 13:24:39.726 INFO [test_pageserver_generations.py:667] Renaming files in /home/heikki/git-sandbox/neon/test_output/test_upgrade_generationless_local_file_paths[debug-pg16]/repo/pageserver_1/tenants/3439538816c520adecc541cc8b1de21c/timelines/6a7be8ee707b355de48dd91b326d6ae1
2024-10-08 13:24:39.728 INFO [test_pageserver_generations.py:673] Renamed
000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0-v1-00000001 -> 000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0
`download_byte_range()` is basically a copy of `download()` with an
additional option passed to the backend SDKs. This can cause these code
paths to diverge, and prevents combining various options.
This patch adds `DownloadOpts::byte_(start|end)` and move byte range
handling into `download()`.
The "Starting postgres endpoint <name>" message is not needed, because
the neon_cli.py prints the neon_local command line used to start the
endpoint. That contains the same information. The "Postgres startup took
XX seconds" message is not very useful because no one pays attention to
those in the python test logs when things are going smoothly, and if you
do wonder about the startup speed, the same information and more can be
found in the compute log.
Before:
2024-10-07 22:32:27.794 INFO [neon_fixtures.py:3492] Starting postgres endpoint ep-1
2024-10-07 22:32:27.794 INFO [neon_cli.py:73] Running command "/tmp/neon/bin/neon_local endpoint start --safekeepers 1 ep-1"
2024-10-07 22:32:27.901 INFO [neon_fixtures.py:3690] Postgres startup took 0.11398935317993164 seconds
After:
2024-10-07 22:32:27.794 INFO [neon_cli.py:73] Running command "/tmp/neon/bin/neon_local endpoint start --safekeepers 1 ep-1"
Implements an initial mechanism for offloading of archived timelines.
Offloading is implemented as specified in the RFC.
For now, there is no persistence, so a restart of the pageserver will
retrigger downloads until the timeline is offloaded again.
We trigger offloading in the compaction loop because we need the signal
for whether compaction is done and everything has been uploaded or not.
Part of #8088
## Problem
When a node goes offline, we trigger reconciles to migrate shards away
from it. If multiple nodes go offline at the same time, we handled them in
sequence. Hence, we might migrate shards from the first offline node to the second
offline node and increase the unavailability period.
## Summary of changes
Refactor heartbeat delta handling to:
1. Update in memory state for all nodes first
2. Handle availability transitions one by one (we have full picture for each node after (1))
Closes https://github.com/neondatabase/neon/issues/9126
## Problem
On macOS:
```
/Users/runner/work/neon/neon//pgxn/neon/file_cache.c:623:19: error: variable 'has_remaining_pages' is used uninitialized whenever 'for' loop exits because its condition is false [-Werror,-Wsometimes-uninitialized]
```
## Summary of changes
- Initialise `has_remaining_pages` with `false`
It didn't serve much value, and was only used twice.
Path(__file__).parent is a pretty easy invocation to use.
Signed-off-by: Tristan Partin <tristan@neon.tech>
If you override CFLAGS, you also override any flags that PostgreSQL
configure script had picked. That includes many options that enable
extra compiler warnings, like '-Wall', '-Wmissing-prototypes', and so
forth. The override was added in commit 171385ac14, but the intention
of that was to be *more* strict, by enabling '-Werror', not less
strict. The proper way of setting '-Werror', as documented in the docs
and mentioned in PR #2405, is to set COPT='-Werror', but leave CFLAGS
alone.
All the compiler warnings with the standard PostgreSQL flags have now
been fixed, so we can do this without adding noise.
Part of the cleanup issue #9217.
It's not a bug, the variable is initialized when it's used, but the
compiler isn't smart enough to see that through all the conditions.
Part of the cleanup issue #9217.
/pgxn/neon/walproposer_compat.c:192:9: warning: function ‘WalProposerLibLog’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
192 | vsnprintf(buf, sizeof(buf), fmt, args);
| ^~~~~~~~~
The warning:
warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
It's PostgreSQL project style to stick to the old C90 style.
(Alternatively, we could disable it for our extension.)
Part of the cleanup issue #9217.
Prototypes for neon_writev(), neon_readv(), and neon_regisersync()
were missing. But instead of adding the missing prototypes, mark all
the smgr functions 'static'.
Part of the cleanup issue #9217.
Silences these compiler warnings:
/pgxn/neon_walredo/walredoproc.c:452:1: warning: ‘CreateFakeSharedMemoryAndSemaphores’ was used with no prototype before its definition [-Wmissing-prototypes]
452 | CreateFakeSharedMemoryAndSemaphores()
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/pgxn/neon/walproposer_pg.c:541:1: warning: no previous prototype for ‘GetWalpropShmemState’ [-Wmissing-prototypes]
541 | GetWalpropShmemState()
| ^~~~~~~~~~~~~~~~~~~~
Part of the cleanup issue #9217.
In v16 merge, we copied much of heap RMGR, to distinguish vanilla
Postgres heap records from records generated with neon patches, with
the additional CID fields. This function is only used by the
HEAP_TRUNCATE records, however, which we didn't need to copy.
Part of the cleanup issue #9217.
In short: Currently we reserve 75% of memory to the LFC, meaning that if
we scale up to keep postgres using less than 25% of the compute's
memory.
This means that for certain memory-heavy workloads, we end up scaling
much higher than is actually needed — in the worst case, up to 4x,
although in practice it tends not to be quite so bad.
Part of neondatabase/autoscaling#1030.
Update hyper and tonic again in the storage broker, this time with a fix
for the issue that made us revert the update last time.
The first commit is a revert of #9268, the second a fix for the issue.
fixes#9231.
I'm trying to debug a situation with the LR benchmark publisher not
being in the correct state. This should aid in debugging, while just
being generally useful.
PR: https://github.com/neondatabase/neon/pull/9265
Signed-off-by: Tristan Partin <tristan@neon.tech>
In PostgreSQL v16, BUFFERTAGS_EQUAL was replaced with a static inline
macro, BufferTagsEqual. Let's use the new name going forward, and have
backwards-compatibility glue to allow using the new name on v14 and v15,
rather than the other way round. This also makes BufferTagsEquals
consistent with InitBufferTag, for which we were already using the new
name.
Requires https://github.com/neondatabase/neon/pull/9086 first to have
`local_proxy_config`. This logic can still be reviewed implementation
wise.
Create JWT Auth functionality related roles without attributes and
`neon_superuser` group.
Read the JWT related roles from `local_proxy_config` `JWKS` settings and
handle them differently than other console created roles.
The prefetch-queue hash table uses a BufferTag struct as the hash key,
and it's hashed using hash_bytes(). It's important that all the padding
bytes in the key are cleared, because hash_bytes() will include them.
I was getting compiler warnings like this on v14 and v15, when compiling
with -Warray-bounds:
In function ‘prfh_lookup_hash_internal’,
inlined from ‘prfh_lookup’ at
pg_install/v14/include/postgresql/server/lib/simplehash.h:821:9,
inlined from ‘neon_read_at_lsnv’ at pgxn/neon/pagestore_smgr.c:2789:11,
inlined from ‘neon_read_at_lsn’ at pgxn/neon/pagestore_smgr.c:2904:2:
pg_install/v14/include/postgresql/server/storage/relfilenode.h:90:43:
warning: array subscript ‘PrefetchRequest[0]’ is partly outside array
bounds of ‘BufferTag[1]’ {aka ‘struct buftag[1]’} [-Warray-bounds]
89 | ((node1).relNode == (node2).relNode && \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
90 | (node1).dbNode == (node2).dbNode && \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
91 | (node1).spcNode == (node2).spcNode)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pg_install/v14/include/postgresql/server/storage/buf_internals.h:116:9:
note: in expansion of macro ‘RelFileNodeEquals’
116 | RelFileNodeEquals((a).rnode, (b).rnode) && \
| ^~~~~~~~~~~~~~~~~
pgxn/neon/neon_pgversioncompat.h:25:31: note: in expansion of macro
‘BUFFERTAGS_EQUAL’
25 | #define BufferTagsEqual(a, b) BUFFERTAGS_EQUAL(*(a), *(b))
| ^~~~~~~~~~~~~~~~
pgxn/neon/pagestore_smgr.c:220:34: note: in expansion of macro
‘BufferTagsEqual’
220 | #define SH_EQUAL(tb, a, b) (BufferTagsEqual(&(a)->buftag,
&(b)->buftag))
| ^~~~~~~~~~~~~~~
pg_install/v14/include/postgresql/server/lib/simplehash.h:280:77: note:
in expansion of macro ‘SH_EQUAL’
280 | #define SH_COMPARE_KEYS(tb, ahash, akey, b) (ahash ==
SH_GET_HASH(tb, b) && SH_EQUAL(tb, b->SH_KEY, akey))
| ^~~~~~~~
pg_install/v14/include/postgresql/server/lib/simplehash.h:799:21: note:
in expansion of macro ‘SH_COMPARE_KEYS’
799 | if (SH_COMPARE_KEYS(tb, hash, key, entry))
| ^~~~~~~~~~~~~~~
pgxn/neon/pagestore_smgr.c: In function ‘neon_read_at_lsn’:
pgxn/neon/pagestore_smgr.c:2742:25: note: object ‘buftag’ of size 20
2742 | BufferTag buftag = {0};
| ^~~~~~
This commit silences those warnings, although it's not clear to me why
the compiler complained like that in the first place. I found the issue
with padding bytes while looking into those warnings, but that was
coincidental, I don't think the padding bytes explain the warnings as
such.
In v16, the BUFFERTAGS_EQUAL macro was replaced with a static inline
function, and that also silences the compiler warning. Not clear to me
why.
## Problem
See #9199
## Summary of changes
Fix update of hits/misses for LFC and prefetch introduced in
78938d1b59
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
If peer safekeeper needs garbage collected segment it will be fetched
now from s3 using on-demand WAL download. Reduces danger of running out of disk space when safekeeper fails.
1. Adds local-proxy to compute image and vm spec
2. Updates local-proxy config processing, writing PID to a file eagerly
3. Updates compute-ctl to understand local proxy compute spec and to
send SIGHUP to local-proxy over that pid.
closes https://github.com/neondatabase/cloud/issues/16867
NeonWALReader needs to know LSN before which WAL is not available
locally, that is, basebackup LSN. Previously it was taken from
WalpropShmemState, but that's racy, as walproposer sets its there only
after successfull election. Get it directly with GetRedoStartLsn.
Should fix flakiness of
test_ondemand_wal_download_in_replication_slot_funcs etc.
ref #9201
## Problem
Creation of a timelines during a reconciliation can lead to
unavailability if the user attempts to
start a compute before the storage controller has notified cplane of the
cut-over.
## Summary of changes
Create timelines on all currently attached locations. For the latest
location, we still look
at the database (this is a previously). With this change we also look
into the observed state
to find *other* attached locations.
Related https://github.com/neondatabase/neon/issues/9144
## Problem
Secondary tenant heatmaps were always downloaded, even when they hadn't
changed. This can be avoided by using a conditional GET request passing
the `ETag` of the previous heatmap.
## Summary of changes
The `ETag` was already plumbed down into the heatmap downloader, and
just needed further plumbing into the remote storage backends.
* Add a `DownloadOpts` struct and pass it to
`RemoteStorage::download()`.
* Add an optional `DownloadOpts::etag` field, which uses a conditional
GET and returns `DownloadError::Unmodified` on match.
## Problem
The S3 tests couldn't use SSO authentication for local tests against S3.
## Summary of changes
Enable the `sso` feature of `aws-config`. Also run `cargo hakari
generate` which made some updates to `workspace_hack`.
In the passing, rename it to NeonLocalCli, to reflect that the binary
is called 'neon_local'.
Add wrapper for the 'timeline_import' command, eliminating the last
raw call to the raw_cli() function from tests, except for a few in
test_neon_cli.py which are about testing the 'neon_local' iteself. All
the other calls are now made through the strongly-typed wrapper
functions
Add wrappers for a few commands that didn't have them before. Move the
logic to generate tenant and timeline IDs from NeonCli to the callers,
so that NeonCli is more purely just a type-safe wrapper around
'neon_local'.
* I had to install `m4` in order to be able to run locally
* The docs/docker.md was missing a pointer to where the compute node
code is
(Was originally on #8888 but I am pulling this out)
## Problem
`Oversized vectored read [...]` logs are spewing in prod because we have
a few keys that
are unexpectedly large:
* reldir/relblock - these are unbounded, so it's known technical debt
* slru block - they can be a bit bigger than 128KiB due to storage
format overhead
## Summary of changes
* Bump threshold to 130KiB
* Don't warn on oversized reldir and dbdir keys
Closes https://github.com/neondatabase/neon/issues/8967
Follow-up of #9234 to give hyper 1.0 the version-free name, and the
legacy version of hyper the one with the version number inside. As we
move away from hyper 0.14, we can remove the `hyper0` name piece by
piece.
Part of #9255
Because:
- it's nice to be up-to-date,
- we already had axum 0.7 in our dependency tree, so this avoids having
to compile two versions, and
- removes one of the remaining dpendencies to hyper version 0
Also bumps the 'tokio-tungstenite' dependency, to avoid having two
versions in the dependency tree.
## Problem
possible for the database connections to not close in time.
## Summary of changes
force the closing of connections if the client has hung up
## Problem
In a recent refactor, we accidentally dropped the cancel session early
## Summary of changes
Hold the cancel session during proxy passthrough
## Problem
Not really a problem, just refactoring.
## Summary of changes
Separate authenticate from wake compute.
Do not call wake compute second time if we managed to connect to
postgres or if we got it not from cache.
## Problem
hard to see where time is taken during HTTP flow.
## Summary of changes
add a lot more for query state. add a conn_id field to the sql-over-http
span
## Problem
`tokio::io::copy_bidirectional` doesn't close the connection once one of
the sides closes it. It's not really suitable for the postgres protocol.
## Summary of changes
Fork `copy_bidirectional` and initiate a shutdown for both connections.
---------
Co-authored-by: Conrad Ludgate <conradludgate@gmail.com>
There is currently no cleanup done after a delta layer creation error,
so delta layers can accumulate. The problem gets worse as the operation
gets retried and delta layers accumulate on the disk. Therefore, delete
them from disk (if something has been written to disk).
## Problem
When a tenant is in Attaching state, and waiting for the
`concurrent_tenant_warmup` semaphore, it also listens for the tenant
cancellation token. When that token fires, Tenant::attach drops out.
Meanwhile, Tenant::set_stopping waits forever for the tenant to exit
Attaching state.
Fixes: https://github.com/neondatabase/neon/issues/6423
## Summary of changes
- In the absence of a valid state for the tenant, it is set to Broken in
this path. A more elegant solution will require more refactoring, beyond
this minimal fix.
(cherry picked from commit 93572a3e99)
Before this patch, the select! still retured immediately if `futs` was
empty. Must have tested a stale build in my manual testing of #6388.
(cherry picked from commit 15c0df4de7)
To exercise MAX_SEND_SIZE sending from safekeeper; we've had a bug with WAL
records torn across several XLogData messages. Add failpoint to safekeeper to
slow down sending. Also check for corrupted WAL complains in standby log.
Make the test a bit simpler in passing, e.g. we don't need explicit commits as
autocommit is enabled by default.
https://neondb.slack.com/archives/C05L7D1JAUS/p1703774799114719https://github.com/neondatabase/cloud/issues/9057
Otherwise they are left orphaned when compute_ctl is terminated with a
signal. It was invisible most of the time because normally neon_local or k8s
kills postgres directly and then compute_ctl finishes gracefully. However, in
some tests compute_ctl gets stuck waiting for sync-safekeepers which
intentionally never ends because safekeepers are offline, and we want to stop
compute_ctl without leaving orphanes behind.
This is a quite rough approach which doesn't wait for children termination. A
better way would be to convert compute_ctl to async which would make waiting
easy.
Release 2023-12-19
We need to do a config change that requires restarting the pageservers.
Slip in two metrics-related commits that didn't make this week's regularly release.
Pre-merge `git merge --squash` of
https://github.com/neondatabase/neon/pull/6115
Lowering the tracing level in get_value_reconstruct_data and
get_or_maybe_download from info to debug reduces the overhead
of span creation in non-debug environments.
## Problem
#6112 added some logs and metrics: clean these up a bit:
- Avoid counting startup completions for tenants launched after startup
- exclude no-op cases from timing histograms
- remove a rogue log messages
Error indicating request cancellation OR timeline shutdown was deemed as
a reason to exit the background worker that calculated synthetic size.
Fix it to only be considered for avoiding logging such of such errors.
This conflicted on tenant_shard_id having already replaced tenant_id on
`main`.
```
could not start the compute node: compute is in state "failed": db error: ERROR: could not access file "$libdir/timescaledb-2.10.1": No such file or directory Caused by: ERROR: could not access file "$libdir/timescaledb-2.10.1": No such file or directory
```
Only applicable change was neondatabase/autoscaling#584, setting
pgbouncer auth_dbname=postgres in order to fix superuser connections
from preventing dropping databases.
Only applicable change was neondatabase/autoscaling#571, removing the
postgres_exporter flags `--auto-discover-databases` and
`--exclude-databases=...`
## Problem
Logical replication requires new AUX_FILES_KEY which is definitely
absent in existed database.
We do not have function to check if key exists in our KV storage.
So I have to handle the error in `list_aux_files` method.
But this key is also included in key space range and accessed y
`create_image_layer` method.
## Summary of changes
Check if AUX_FILES_KEY exists before including it in keyspace.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Shany Pozin <shany@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Fixes an issue we observed on staging that happens when the
autoscaler-agent attempts to immediately downscale the VM after binding,
which is typical for pooled computes.
The issue was occurring because the autoscaler-agent was requesting
downscaling before the vm-monitor had gathered sufficient cgroup memory
stats to be confident in approving it. When the vm-monitor returned an
internal error instead of denying downscaling, the autoscaler-agent
retried the connection and immediately hit the same issue (in part
because cgroup stats are collected per-connection, rather than
globally).
There's currently an issue with the vm-monitor on staging that's not
really feasible to debug because the current display impl gives no
context to the errors (just says "failed to downscale").
Logging the full error should help.
For communications with the autoscaler-agent, it's ok to only provide
the outermost cause, because we can cross-reference with the VM logs.
At some point in the future, we may want to change that.
tl;dr it's really hard to avoid throttling from memory.high, and it
counts tmpfs & page cache usage, so it's also hard to make sense of.
In the interest of fixing things quickly with something that should be
*good enough*, this PR switches to instead periodically fetch memory
statistics from the cgroup's memory.stat and use that data to determine
if and when we should upscale.
This PR fixes#5444, which has a lot more detail on the difficulties
we've hit with memory.high. This PR also supersedes #5488.
Before this PR, when we restarted pageserver, we'd see a rush of
`$number_of_tenants` concurrent eviction tasks starting to do imitate
accesses building up in the period of `[init_order allows activations,
$random_access_delay + EvictionPolicyLayerAccessThreshold::period]`.
We simply cannot handle that degree of concurrent IO.
We already solved the problem for compactions by adding a semaphore.
So, this PR shares that semaphore for use by evictions.
Part of https://github.com/neondatabase/neon/issues/5479
Which is again part of https://github.com/neondatabase/neon/issues/4743
Risks / Changes In System Behavior
==================================
* we don't do evictions as timely as we currently do
* we log a bunch of warnings about eviction taking too long
* imitate accesses and compactions compete for the same concurrency
limit, so, they'll slow each other down through this shares semaphore
Changes
=======
- Move the `CONCURRENT_COMPACTIONS` semaphore into `tasks.rs`
- Rename it to `CONCURRENT_BACKGROUND_TASKS`
- Use it also for the eviction imitate accesses:
- Imitate acceses are both per-TIMELINE and per-TENANT
- The per-TENANT is done through coalescing all the per-TIMELINE
tasks via a tokio mutex `eviction_task_tenant_state`.
- We acquire the CONCURRENT_BACKGROUND_TASKS permit early, at the
beginning of the eviction iteration, much before the imitate
acesses start (and they may not even start at all in the given
iteration, as they happen only every $threshold).
- Acquiring early is **sub-optimal** because when the per-timline
tasks coalesce on the `eviction_task_tenant_state` mutex,
they are already holding a CONCURRENT_BACKGROUND_TASKS permit.
- It's also unfair because tenants with many timelines win
the CONCURRENT_BACKGROUND_TASKS more often.
- I don't think there's another way though, without refactoring
more of the imitate accesses logic, e.g, making it all per-tenant.
- Add metrics for queue depth behind the semaphore.
I found these very useful to understand what work is queued in the
system.
- The metrics are tagged by the new `BackgroundLoopKind`.
- On a green slate, I would have used `TaskKind`, but we already had
pre-existing labels whose names didn't map exactly to task kind.
Also the task kind is kind of a lower-level detail, so, I think
it's fine to have a separate enum to identify background work kinds.
Future Work
===========
I guess I could move the eviction tasks from a ticker to "sleep for
$period".
The benefit would be that the semaphore automatically "smears" the
eviction task scheduling over time, so, we only have the rush on restart
but a smeared-out rush afterward.
The downside is that this perverts the meaning of "$period", as we'd
actually not run the eviction at a fixed period. It also means the the
"took to long" warning & metric becomes meaningless.
Then again, that is already the case for the compaction and gc tasks,
which do sleep for `$period` instead of using a ticker.
(cherry picked from commit 9256788273)
## Problem
Folks have re-taged releases for `pg_jsonschema` and `pg_graphql` (to
increase timeouts on their CI), for us, these are a noop changes,
but unfortunately, this will cause our builds to fail due to checksums
mismatch (this might not strike right away because of the build cache).
- 8ba7c7be9d
- aa7509370a
## Summary of changes
- `pg_jsonschema` update checksum
- `pg_graphql` update checksum
When you log more than a few blocks, you need to reserve the space in
advance. We didn't do that, so we got errors. Now we do that, and
shouldn't get errors.
## Problem
See https://neondb.slack.com/archives/C05L7D1JAUS/p1694614585955029https://www.notion.so/neondatabase/Duplicate-key-issue-651627ce843c45188fbdcb2d30fd2178
## Summary of changes
Swap old/new block references
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
The sequence that can lead to a deadlock:
1. DELETE request gets all the way to `tenant.shutdown(progress,
false).await.is_err() ` , while holding TENANTS.read()
2. POST request for tenant creation comes in, calls `tenant_map_insert`,
it does `let mut guard = TENANTS.write().await;`
3. Something that `tenant.shutdown()` needs to wait for needs a
`TENANTS.read().await`.
The only case identified in exhaustive manual scanning of the code base
is this one:
Imitate size access does `get_tenant().await`, which does
`TENANTS.read().await` under the hood.
In the above case (1) waits for (3), (3)'s read-lock request is queued
behind (2)'s write-lock, and (2) waits for (1).
Deadlock.
I made a reproducer/proof-that-above-hypothesis-holds in
https://github.com/neondatabase/neon/pull/5281 , but, it's not ready for
merge yet and we want the fix _now_.
fixes https://github.com/neondatabase/neon/issues/5284
## Problem
We were returning Pending when a connection had a notice/notification
(introduced recently in #5020). When returning pending, the runtime
assumes you will call `cx.waker().wake()` in order to continue
processing.
We weren't doing that, so the connection task would get stuck
## Summary of changes
Don't return pending. Loop instead
## Problem
cargo deny lint broken
Links to the CVEs:
[rustsec.org/advisories/RUSTSEC-2023-0052](https://rustsec.org/advisories/RUSTSEC-2023-0052)
[rustsec.org/advisories/RUSTSEC-2023-0053](https://rustsec.org/advisories/RUSTSEC-2023-0053)
One is fixed, the other one isn't so we allow it (for now), to unbreak
CI. Then later we'll try to get rid of webpki in favour of the rustls
fork.
## Summary of changes
```
+ignore = ["RUSTSEC-2023-0052"]
```
## Problem
When an endpoint is shutting down, it can take a few seconds. Currently
when starting a new compute, this causes an "endpoint is in transition"
error. We need to add delays before retrying to ensure that we allow
time for the endpoint to shutdown properly.
## Summary of changes
Adds a delay before retrying in auth. connect_to_compute already has
this delay
commit
commit 5f8fd640bf
Author: Alek Westover <alek.westover@gmail.com>
Date: Wed Jul 26 08:24:03 2023 -0400
Upload Test Remote Extensions (#4792)
switched to using the release tag instead of `latest`, but,
the `promote-images` job only uploads `latest` to the prod ECR.
The switch to using release tag was good in principle, but,
reverting that part to make the release pipeine work.
Note that a proper fix should abandon use of `:latest` tag
at all: currently, if a `main` pipeline runs concurrently
with a `release` pipeline, the `release` pipeline may end
up using the `main` pipeline's images.
## Problem
If we fail to wake up the compute node, a subsequent connect attempt
will definitely fail. However, kubernetes won't fail the connection
immediately, instead it hangs until we timeout (10s).
## Summary of changes
Refactor the loop to allow fast retries of compute_wake and to skip a
connect attempt.
## Problem
#4598 compute nodes are not accessible some time after wake up due to
kubernetes DNS not being fully propagated.
## Summary of changes
Update connect retry mechanism to support handling IO errors and
sleeping for 100ms
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
```
CREATE EXTENSION embedding;
CREATE TABLE t (val real[]);
INSERT INTO t (val) VALUES ('{0,0,0}'), ('{1,2,3}'), ('{1,1,1}'), (NULL);
CREATE INDEX ON t USING hnsw (val) WITH (maxelements = 10, dims=3, m=3);
INSERT INTO t (val) VALUES (array[1,2,4]);
SELECT * FROM t ORDER BY val <-> array[3,3,3];
val
---------
{1,2,3}
{1,2,4}
{1,1,1}
{0,0,0}
(5 rows)
```
The consumption metrics synthetic size worker does logical size calculation.
Logical size calculation currently does synchronous disk IO.
This blocks the MGMT_REQUEST_RUNTIME's executor threads, starving other futures.
While there's work on the way to move the synchronous disk IO into spawn_blocking,
the quickfix here is to use the BACKGROUND_RUNTIME instead of MGMT_REQUEST_RUNTIME.
Actually it's not just a quickfix. We simply shouldn't be blocking MGMT_REQUEST_RUNTIME
executor threads on CPU or sync disk IO.
That work isn't done yet, as many of the mgmt tasks still _do_ disk IO.
But it's not as intensive as the logical size calculations that we're fixing here.
While we're at it, fix disk-usage-based eviction in a similar way.
It wasn't the culprit here, according to prod logs, but it can theoretically be
a little CPU-intensive.
More context, including graphs from Prod:
https://neondb.slack.com/archives/C03F5SM1N02/p1687541681336949
(cherry picked from commit d6e35222ea)
This commit introduces an SQL-over-HTTP endpoint in the proxy, with a JSON
response structure resembling that of the node-postgres driver. This method,
using HTTP POST, achieves smaller amortized latencies in edge setups due to
fewer round trips and an enhanced open connection reuse by the v8 engine.
This update involves several intricacies:
1. SQL injection protection: We employed the extended query protocol, modifying
the rust-postgres driver to send queries in one roundtrip using a text
protocol rather than binary, bypassing potential issues like those identified
in https://github.com/sfackler/rust-postgres/issues/1030.
2. Postgres type compatibility: As not all postgres types have binary
representations (e.g., acl's in pg_class), we adjusted rust-postgres to
respond with text protocol, simplifying serialization and fixing queries with
text-only types in response.
3. Data type conversion: Considering JSON supports fewer data types than
Postgres, we perform conversions where possible, passing all other types as
strings. Key conversions include:
- postgres int2, int4, float4, float8 -> json number (NaN and Inf remain
text)
- postgres bool, null, text -> json bool, null, string
- postgres array -> json array
- postgres json and jsonb -> json object
4. Alignment with node-postgres: To facilitate integration with js libraries,
we've matched the response structure of node-postgres, returning command tags
and column oids. Command tag capturing was added to the rust-postgres
functionality as part of this change.
## Problem
Compatibility tests don't support Postgres 15 yet, but we're still
trying to upload compatibility snapshot (which we do not collect).
Ref
https://github.com/neondatabase/neon/actions/runs/4991394158/jobs/8940369368#step:4:38129
## Summary of changes
Add `pg_version` parameter to `run-python-test-set` actions and do not
upload compatibility snapshot for Postgres 15
This reverts commit 732acc5.
Reverted PR: #3869
As noted in PR #4094, we do in fact try to insert duplicates to the
layer map, if L0->L1 compaction is interrupted. We do not have a proper
fix for that right now, and we are in a hurry to make a release to
production, so revert the changes related to this to the state that we
have in production currently. We know that we have a bug here, but
better to live with the bug that we've had in production for a long
time, than rush a fix to production without testing it in staging first.
Cc: #4094, #4088
Otherwise they get lost. Normally buffer is empty before proxy pass, but this is
not the case with pipeline mode of out npm driver; fixes connection hangup
introduced by b80fe41af3 for it.
fixes https://github.com/neondatabase/neon/issues/3822
## Describe your changes
We have previously changed the neon-proxy to use RollingUpdate. This
should be enabled in legacy proxy too in order to avoid breaking
connections for the clients and allow for example backups to run even
during deployment. (https://github.com/neondatabase/neon/pull/3683)
## Issue ticket number and link
https://github.com/neondatabase/neon/issues/3333
## Describe your changes
Rebase vendored PostgreSQL onto 14.7 and 15.2
## Issue ticket number and link
#3579
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [x] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
```
The version of PostgreSQL that we use is updated to 14.7 for PostgreSQL
14 and 15.2 for PostgreSQL 15.
```
previously we applied the ratelimiting only up to receiving the headers
from s3, or somewhere near it. the commit adds an adapter which carries
the permit until the AsyncRead has been disposed.
fixes#3662.
Calculation of logical size is now async because of layer downloads, so
we shouldn't use spawn_blocking for it. Use of `spawn_blocking`
exhausted resources which are needed by `tokio::io::copy` when copying
from a stream to a file which lead to deadlock.
Fixes: #3657
these are happening in tests because of #3655 but they sure took some
time to appear.
makes the `Compaction failed, retrying in 2s: Cannot run compaction
iteration on inactive tenant` into a globally allowed error, because it
has been seen failing on different test cases.
Small changes, but hopefully this will help with the panic detected in
staging, for which we cannot get the debugging information right now
(end-of-branch before branch-point).
Before only the timelines which have passed the `gc_horizon` were
processed which failed with orphans at the tree_sort phase. Example
input in added `test_branched_empty_timeline_size` test case.
The PR changes iteration to happen through all timelines, and in
addition to that, any learned branch points will be calculated as they
would had been in the original implementation if the ancestor branch had
been over the `gc_horizon`.
This also changes how tenants where all timelines are below `gc_horizon`
are handled. Previously tenant_size 0 was returned, but now they will
have approximately `initdb_lsn` worth of tenant_size.
The PR also adds several new tenant size tests that describe various corner
cases of branching structure and `gc_horizon` setting.
They are currently disabled to not consume time during CI.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Previously, we were trying to re-assign owned objects of the already
deleted role. This were causing a crash loop in the case when compute
was restarted with a spec that includes delta operation for role
deletion. To avoid such cases, check that role is still present before
calling `reassign_owned_objects`.
Resolvesneondatabase/cloud#3553
This reverts commit 826e89b9ce.
The problem with that commit was that it deletes the TempDir while
there are still EphemeralFile instances open.
At first I thought this could be fixed by simply adding
Handle::current().block_on(task_mgr::shutdown(None, Some(tenant_id), None))
to TenantHarness::drop, but it turned out to be insufficient.
So, reverting the commit until we find a proper solution.
refs https://github.com/neondatabase/neon/issues/3385
Refactors Compute::prepare_and_run. It's split into subroutines
differently, to make it easier to attach tracing spans to the
different stages. The high-level logic for waiting for Postgres to
exit is moved to the caller.
Replace 'env_logger' with 'tracing', and add `#instrument` directives
to different stages fo the startup process. This is a fairly
mechanical change, except for the changes in 'spec.rs'. 'spec.rs'
contained some complicated formatting, where parts of log messages
were printed directly to stdout with `print`s. That was a bit messed
up because the log normally goes to stderr, but those lines were
printed to stdout. In our docker images, stderr and stdout both go to
the same place so you wouldn't notice, but I don't think it was
intentional.
This changes the log format to the default
'tracing_subscriber::format' format. It's different from the Postgres
log format, however, and because both compute_tools and Postgres print
to the same log, it's now a mix of two different formats. I'm not
sure how the Grafana log parsing pipeline can handle that. If it's a
problem, we can build custom formatter to change the compute_tools log
format to be the same as Postgres's, like it was before this commit,
or we can change the Postgres log format to match tracing_formatter's,
or we can start printing compute_tool's log output to a different
destination than Postgres
IMDSv2 has limits, and if we query it on every s3 interaction we are
going to go over those limits. Changes the s3_bucket client
configuration to use:
- ChainCredentialsProvider to handle env variables or imds usage
- LazyCachingCredentialsProvider to actually cache any credentials
Related: https://github.com/awslabs/aws-sdk-rust/issues/629
Possibly related: https://github.com/neondatabase/neon/issues/3118
plv8 can only be built with a fairly new gold linker version. We used to install
it via binutils packages from testing, but it also updates libc and that causes
troubles in the resulting image as different extensions were built against
different libc versions. We could either use libc from debian-testing everywhere
or restrain from using testing packages and install necessary programs manually.
This patch uses the latter approach: gold for plv8 and cmake for h3 are
installed manually.
In a passing declare h3_postgis as a safe extension (previous omission).
`GRANT CREATE ON SCHEMA public` fails if there is no schema `public`.
Disable it in release for now and make a better fix later (it is
needed for v15 support).
* Check for entire range during sasl validation (#2281)
* Gen2 GH runner (#2128)
* Re-add rustup override
* Try s3 bucket
* Set git version
* Use v4 cache key to prevent problems
* Switch to v5 for key
* Add second rustup fix
* Rebase
* Add kaniko steps
* Fix typo and set compress level
* Disable global run default
* Specify shell for step
* Change approach with kaniko
* Try less verbose shell spec
* Add submodule pull
* Add promote step
* Adjust dependency chain
* Try default swap again
* Use env
* Don't override aws key
* Make kaniko build conditional
* Specify runs on
* Try without dependency link
* Try soft fail
* Use image with git
* Try passing to next step
* Fix duplicate
* Try other approach
* Try other approach
* Fix typo
* Try other syntax
* Set env
* Adjust setup
* Try step 1
* Add link
* Try global env
* Fix mistake
* Debug
* Try other syntax
* Try other approach
* Change order
* Move output one step down
* Put output up one level
* Try other syntax
* Skip build
* Try output
* Re-enable build
* Try other syntax
* Skip middle step
* Update check
* Try first step of dockerhub push
* Update needs dependency
* Try explicit dir
* Add missing package
* Try other approach
* Try other approach
* Specify region
* Use with
* Try other approach
* Add debug
* Try other approach
* Set region
* Follow AWS example
* Try github approach
* Skip Qemu
* Try stdin
* Missing steps
* Add missing close
* Add echo debug
* Try v2 endpoint
* Use v1 endpoint
* Try without quotes
* Revert
* Try crane
* Add debug
* Split steps
* Fix duplicate
* Add shell step
* Conform to options
* Add verbose flag
* Try single step
* Try workaround
* First request fails hunch
* Try bullseye image
* Try other approach
* Adjust verbose level
* Try previous step
* Add more debug
* Remove debug step
* Remove rogue indent
* Try with larger image
* Add build tag step
* Update workflow for testing
* Add tag step for test
* Remove unused
* Update dependency chain
* Add ownership fix
* Use matrix for promote
* Force update
* Force build
* Remove unused
* Add new image
* Add missing argument
* Update dockerfile copy
* Update Dockerfile
* Update clone
* Update dockerfile
* Go to correct folder
* Use correct format
* Update dockerfile
* Remove cd
* Debug find where we are
* Add debug on first step
* Changedir to postgres
* Set workdir
* Use v1 approach
* Use other dependency
* Try other approach
* Try other approach
* Update dockerfile
* Update approach
* Update dockerfile
* Update approach
* Update dockerfile
* Update dockerfile
* Add workspace hack
* Update Dockerfile
* Update Dockerfile
* Update Dockerfile
* Change last step
* Cleanup pull in prep for review
* Force build images
* Add condition for latest tagging
* Use pinned version
* Try without name value
* Remove more names
* Shorten names
* Add kaniko comments
* Pin kaniko
* Pin crane and ecr helper
* Up one level
* Switch to pinned tag for rust image
* Force update for test
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@b04468bf-cdf4-41eb-9c94-aff4ca55e4bf.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@Rorys-Mac-Studio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@4795e9ee-4f32-401f-85f3-f316263b62b8.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@2f8bc4e5-4ec2-4ea2-adb1-65d863c4a558.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@27565b2b-72d5-4742-9898-a26c9033e6f9.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@ecc96c26-c6c4-4664-be6e-34f7c3f89a3c.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@7caff3a5-bf03-4202-bd0e-f1a93c86bdae.fritz.box>
* Add missing step output, revert one deploy step (#2285)
* Add missing step output, revert one deploy step
* Conform to syntax
* Update approach
* Add missing value
* Add missing needs
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Error for fatal not git repo (#2286)
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Use main, not branch for ref check (#2288)
* Use main, not branch for ref check
* Add more debug
* Count main, not head
* Try new approach
* Conform to syntax
* Update approach
* Get full history
* Skip checkout
* Cleanup debug
* Remove more debug
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Fix docker zombie process issue (#2289)
* Fix docker zombie process issue
* Init everywhere
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Fix 1.63 clippy lints (#2282)
* split out timeline metrics, track layer map loading and size calculation
* reset rust cache for clippy run to avoid an ICE
additionally remove trailing whitespaces
* Rename pg_control_ffi.h to bindgen_deps.h, for clarity.
The pg_control_ffi.h name implies that it only includes stuff related to
pg_control.h. That's mostly true currently, but really the point of the
file is to include everything that we need to generate Rust definitions
from.
* Make local mypy behave like CI mypy (#2291)
* Fix flaky pageserver restarts in tests (#2261)
* Remove extra type aliases (#2280)
* Update cachepot endpoint (#2290)
* Update cachepot endpoint
* Update dockerfile & remove env
* Update image building process
* Cannot use metadata endpoint for this
* Update workflow
* Conform to kaniko syntax
* Update syntax
* Update approach
* Update dockerfiles
* Force update
* Update dockerfiles
* Update dockerfile
* Cleanup dockerfiles
* Update s3 test location
* Revert s3 experiment
* Add more debug
* Specify aws region
* Remove debug, add prefix
* Remove one more debug
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* workflows/benchmarking: increase timeout (#2294)
* Rework `init` in pageserver CLI (#2272)
* Do not create initial tenant and timeline (adjust Python tests for that)
* Rework config handling during init, add --update-config to manage local config updates
* Fix: Always build images (#2296)
* Always build images
* Remove unused
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Move auto-generated 'bindings' to a separate inner module.
Re-export only things that are used by other modules.
In the future, I'm imagining that we run bindgen twice, for Postgres
v14 and v15. The two sets of bindings would go into separate
'bindings_v14' and 'bindings_v15' modules.
Rearrange postgres_ffi modules.
Move function, to avoid Postgres version dependency in timelines.rs
Move function to generate a logical-message WAL record to postgres_ffi.
* fix cargo test
* Fix walreceiver and safekeeper bugs (#2295)
- There was an issue with zero commit_lsn `reason: LaggingWal { current_commit_lsn: 0/0, new_commit_lsn: 1/6FD90D38, threshold: 10485760 } }`. The problem was in `send_wal.rs`, where we initialized `end_pos = Lsn(0)` and in some cases sent it to the pageserver.
- IDENTIFY_SYSTEM previously returned `flush_lsn` as a physical end of WAL. Now it returns `flush_lsn` (as it was) to walproposer and `commit_lsn` to everyone else including pageserver.
- There was an issue with backoff where connection was cancelled right after initialization: `connected!` -> `safekeeper_handle_db: Connection cancelled` -> `Backoff: waiting 3 seconds`. The problem was in sleeping before establishing the connection. This is fixed by reworking retry logic.
- There was an issue with getting `NoKeepAlives` reason in a loop. The issue is probably the same as the previous.
- There was an issue with filtering safekeepers based on retry attempts, which could filter some safekeepers indefinetely. This is fixed by using retry cooldown duration instead of retry attempts.
- Some `send_wal.rs` connections failed with errors without context. This is fixed by adding a timeline to safekeepers errors.
New retry logic works like this:
- Every candidate has a `next_retry_at` timestamp and is not considered for connection until that moment
- When walreceiver connection is closed, we update `next_retry_at` using exponential backoff, increasing the cooldown on every disconnect.
- When `last_record_lsn` was advanced using the WAL from the safekeeper, we reset the retry cooldown and exponential backoff, allowing walreceiver to reconnect to the same safekeeper instantly.
* on safekeeper registration pass availability zone param (#2292)
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Rory de Zoete <33318916+zoete@users.noreply.github.com>
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@b04468bf-cdf4-41eb-9c94-aff4ca55e4bf.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@Rorys-Mac-Studio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@4795e9ee-4f32-401f-85f3-f316263b62b8.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@2f8bc4e5-4ec2-4ea2-adb1-65d863c4a558.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@27565b2b-72d5-4742-9898-a26c9033e6f9.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@ecc96c26-c6c4-4664-be6e-34f7c3f89a3c.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@7caff3a5-bf03-4202-bd0e-f1a93c86bdae.fritz.box>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Anton Galitsyn <agalitsyn@users.noreply.github.com>
* github/workflows: Fix git dubious ownership (#2223)
* Move relation size cache from WalIngest to DatadirTimeline (#2094)
* Move relation sie cache to layered timeline
* Fix obtaining current LSN for relation size cache
* Resolve merge conflicts
* Resolve merge conflicts
* Reestore 'lsn' field in DatadirModification
* adjust DatadirModification lsn in ingest_record
* Fix formatting
* Pass lsn to get_relsize
* Fix merge conflict
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* refactor: replace lazy-static with once-cell (#2195)
- Replacing all the occurrences of lazy-static with `once-cell::sync::Lazy`
- fixes#1147
Signed-off-by: Ankur Srivastava <best.ankur@gmail.com>
* Add more buckets to pageserver latency metrics (#2225)
* ignore record property warning to fix benchmarks
* increase statement timeout
* use event so it fires only if workload thread successfully finished
* remove debug log
* increase timeout to pass test with real s3
* avoid duplicate parameter, increase timeout
* Major migration script (#2073)
This script can be used to migrate a tenant across breaking storage versions, or (in the future) upgrading postgres versions. See the comment at the top for an overview.
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
* Fix etcd typos
* Fix links to safekeeper protocol docs. (#2188)
safekeeper/README_PROTO.md was moved to docs/safekeeper-protocol.md in
commit 0b14fdb078, as part of reorganizing the docs into 'mdbook' format.
Fixes issue #1475. Thanks to @banks for spotting the outdated references.
In addition to fixing the above issue, this patch also fixes other broken links as a result of 0b14fdb078. See https://github.com/neondatabase/neon/pull/2188#pullrequestreview-1055918480.
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Thang Pham <thang@neon.tech>
* Update CONTRIBUTING.md
* Update CONTRIBUTING.md
* support node id and remote storage params in docker_entrypoint.sh
* Safe truncate (#2218)
* Move relation sie cache to layered timeline
* Fix obtaining current LSN for relation size cache
* Resolve merge conflicts
* Resolve merge conflicts
* Reestore 'lsn' field in DatadirModification
* adjust DatadirModification lsn in ingest_record
* Fix formatting
* Pass lsn to get_relsize
* Fix merge conflict
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Check if relation exists before trying to truncat it
refer #1932
* Add test reporducing FSM truncate problem
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Fix exponential backoff values
* Update back `vendor/postgres` back; it was changed accidentally. (#2251)
Commit 4227cfc96e accidentally reverted vendor/postgres to an older
version. Update it back.
* Add pageserver checkpoint_timeout option.
To flush inmemory layer eventually when no new data arrives, which helps
safekeepers to suspend activity (stop pushing to the broker). Default 10m should
be ok.
* Share exponential backoff code and fix logic for delete task failure (#2252)
* Fix bug when import large (>1GB) relations (#2172)
Resolves#2097
- use timeline modification's `lsn` and timeline's `last_record_lsn` to determine the corresponding LSN to query data in `DatadirModification::get`
- update `test_import_from_pageserver`. Split the test into 2 variants: `small` and `multisegment`.
+ `small` is the old test
+ `multisegment` is to simulate #2097 by using a larger number of inserted rows to create multiple segment files of a relation. `multisegment` is configured to only run with a `release` build
* Fix timeline physical size flaky tests (#2244)
Resolves#2212.
- use `wait_for_last_flush_lsn` in `test_timeline_physical_size_*` tests
## Context
Need to wait for the pageserver to catch up with the compute's last flush LSN because during the timeline physical size API call, it's possible that there are running `LayerFlushThread` threads. These threads flush new layers into disk and hence update the physical size. This results in a mismatch between the physical size reported by the API and the actual physical size on disk.
### Note
The `LayerFlushThread` threads are processed **concurrently**, so it's possible that the above error still persists even with this patch. However, making the tests wait to finish processing all the WALs (not flushing) before calculating the physical size should help reduce the "flakiness" significantly
* postgres_ffi/waldecoder: validate more header fields
* postgres_ffi/waldecoder: remove unused startlsn
* postgres_ffi/waldecoder: introduce explicit `enum State`
Previously it was emulated with a combination of nullable fields.
This change should make the logic more readable.
* disable `test_import_from_pageserver_multisegment` (#2258)
This test failed consistently on `main` now. It's better to temporarily disable it to avoid blocking others' PRs while investigating the root cause for the test failure.
See: #2255, #2256
* get_binaries uses DOCKER_TAG taken from docker image build step (#2260)
* [proxy] Rework wire format of the password hack and some errors (#2236)
The new format has a few benefits: it's shorter, simpler and
human-readable as well. We don't use base64 anymore, since
url encoding got us covered.
We also show a better error in case we couldn't parse the
payload; the users should know it's all about passing the
correct project name.
* test_runner/pg_clients: collect docker logs (#2259)
* get_binaries script fix (#2263)
* get_binaries uses DOCKER_TAG taken from docker image build step
* remove docker tag discovery at all and fix get_binaries for version variable
* Better storage sync logs (#2268)
* Find end of WAL on safekeepers using WalStreamDecoder.
We could make it inside wal_storage.rs, but taking into account that
- wal_storage.rs reading is async
- we don't need s3 here
- error handling is different; error during decoding is normal
I decided to put it separately.
Test
cargo test test_find_end_of_wal_last_crossing_segment
prepared earlier by @yeputons passes now.
Fixes https://github.com/neondatabase/neon/issues/544https://github.com/neondatabase/cloud/issues/2004
Supersedes https://github.com/neondatabase/neon/pull/2066
* Improve walreceiver logic (#2253)
This patch makes walreceiver logic more complicated, but it should work better in most cases. Added `test_wal_lagging` to test scenarios where alive safekeepers can lag behind other alive safekeepers.
- There was a bug which looks like `etcd_info.timeline.commit_lsn > Some(self.local_timeline.get_last_record_lsn())` filtered all safekeepers in some strange cases. I removed this filter, it should probably help with #2237
- Now walreceiver_connection reports status, including commit_lsn. This allows keeping safekeeper connection even when etcd is down.
- Safekeeper connection now fails if pageserver doesn't receive safekeeper messages for some time. Usually safekeeper sends messages at least once per second.
- `LaggingWal` check now uses `commit_lsn` directly from safekeeper. This fixes the issue with often reconnects, when compute generates WAL really fast.
- `NoWalTimeout` is rewritten to trigger only when we know about the new WAL and the connected safekeeper doesn't stream any WAL. This allows setting a small `lagging_wal_timeout` because it will trigger only when we observe that the connected safekeeper has stuck.
* increase timeout in wait_for_upload to avoid spurious failures when testing with real s3
* Bump vendor/postgres to include XLP_FIRST_IS_CONTRECORD fix. (#2274)
* Set up a workflow to run pgbench against captest (#2077)
Signed-off-by: Ankur Srivastava <best.ankur@gmail.com>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@garret.ru>
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
Co-authored-by: Ankur Srivastava <ansrivas@users.noreply.github.com>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Thang Pham <thang@neon.tech>
Co-authored-by: Stas Kelvich <stas.kelvich@gmail.com>
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
Co-authored-by: Egor Suvorov <egor@neon.tech>
Co-authored-by: Andrey Taranik <andrey@cicd.team>
Co-authored-by: Dmitry Ivanov <ivadmi5@gmail.com>
[HOTFIX] Release deploy fix
This PR uses this branch neondatabase/postgres#171 and several required commits from the main to use only locally built compute-tools. This should allow us to rollout safekeepers sync issue fix on prod
select lfc_value as lfc_misses from neon.neon_lfc_stats where lfc_key='file_cache_misses';
- metric_name:lfc_used
type:gauge
help:'LFC chunks used (chunk = 1MB)'
key_labels:
values:[lfc_used]
query:|
select lfc_value as lfc_used from neon.neon_lfc_stats where lfc_key='file_cache_used';
- metric_name:lfc_hits
type:gauge
help:'lfc_hits'
key_labels:
values:[lfc_hits]
query:|
select lfc_value as lfc_hits from neon.neon_lfc_stats where lfc_key='file_cache_hits';
- metric_name:lfc_writes
type:gauge
help:'lfc_writes'
key_labels:
values:[lfc_writes]
query:|
select lfc_value as lfc_writes from neon.neon_lfc_stats where lfc_key='file_cache_writes';
- metric_name:lfc_cache_size_limit
type:gauge
help:'LFC cache size limit in bytes'
key_labels:
values:[lfc_cache_size_limit]
query:|
select pg_size_bytes(current_setting('neon.file_cache_size_limit')) as lfc_cache_size_limit;
- metric_name:connection_counts
type:gauge
help:'Connection counts'
key_labels:
- datname
- state
values:[count]
query:|
select datname, state, count(*) as count from pg_stat_activity where state <> '' group by datname, state;
- metric_name:pg_stats_userdb
type:gauge
help:'Stats for several oldest non-system dbs'
key_labels:
- datname
value_label:kind
values:
- db_size
- deadlocks
# Rows
- inserted
- updated
- deleted
# We export stats for 10 non-system database. Without this limit
# it is too easy to abuse the system by creating lots of databases.
query:|
select pg_database_size(datname) as db_size, deadlocks,
tup_inserted as inserted, tup_updated as updated, tup_deleted as deleted,
datname
from pg_stat_database
where datname IN (
select datname
from pg_database
where datname <> 'postgres' and not datistemplate
order by oid
limit 10
);
- metric_name:max_cluster_size
type:gauge
help:'neon.max_cluster_size setting'
key_labels:
values:[max_cluster_size]
query:|
select setting::int as max_cluster_size from pg_settings where name = 'neon.max_cluster_size';
- metric_name:db_total_size
type:gauge
help:'Size of all databases'
key_labels:
values:[total]
query:|
select sum(pg_database_size(datname)) as total from pg_database;
- metric_name:getpage_wait_seconds_count
type:counter
help:'Number of getpage requests'
values:[getpage_wait_seconds_count]
query_ref:neon_perf_counters
- metric_name:getpage_wait_seconds_sum
type:counter
help:'Time spent in getpage requests'
values:[getpage_wait_seconds_sum]
query_ref:neon_perf_counters
- metric_name:getpage_prefetch_requests_total
type:counter
help:'Number of getpage issued for prefetching'
values:[getpage_prefetch_requests_total]
query_ref:neon_perf_counters
- metric_name:getpage_sync_requests_total
type:counter
help:'Number of synchronous getpage issued'
values:[getpage_sync_requests_total]
query_ref:neon_perf_counters
- metric_name:getpage_prefetch_misses_total
type:counter
help:'Total number of readahead misses; consisting of either prefetches that don''t satisfy the LSN bounds once the prefetch got read by the backend, or cases where somehow no readahead was issued for the read'
values:[getpage_prefetch_misses_total]
query_ref:neon_perf_counters
- metric_name:getpage_prefetch_discards_total
type:counter
help:'Number of prefetch responses issued but not used'
values:[getpage_prefetch_discards_total]
query_ref:neon_perf_counters
- metric_name:pageserver_requests_sent_total
type:counter
help:'Number of all requests sent to the pageserver (not just GetPage requests)'
values:[pageserver_requests_sent_total]
query_ref:neon_perf_counters
- metric_name:pageserver_disconnects_total
type:counter
help:'Number of times that the connection to the pageserver was lost'
values:[pageserver_disconnects_total]
query_ref:neon_perf_counters
- metric_name:pageserver_send_flushes_total
type:counter
help:'Number of flushes to the pageserver connection'
values:[pageserver_send_flushes_total]
query_ref:neon_perf_counters
- metric_name:getpage_wait_seconds_bucket
type:counter
help:'Histogram buckets of getpage request latency'
key_labels:
- bucket_le
values:[value]
query_ref:getpage_wait_seconds_buckets
# DEPRECATED
- metric_name:lfc_approximate_working_set_size
type:gauge
help:'Approximate working set size in pages of 8192 bytes'
key_labels:
values:[approximate_working_set_size]
query:|
select neon.approximate_working_set_size(false) as approximate_working_set_size;
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
