build(deps): bump certifi from 2023.7.22 to 2024.7.4 (#8301)

The find-large-objects scrubber subcommand is quite fast if you run it
in an environment with low latency to the S3 bucket (say an EC2 instance
in the same region). However, the higher the latency gets, the slower
the command becomes. Therefore, add a concurrency param and make it
parallelized. This doesn't change that general relationship, but at
least lets us do multiple requests in parallel and therefore hopefully
faster.

Running with concurrency of 64 (default):

```
2024-07-05T17:30:22.882959Z  INFO lazy_load_identity [...]
[...]
2024-07-05T17:30:28.289853Z  INFO Scanned 500 shards. [...]
```

With concurrency of 1, simulating state before this PR:

```
2024-07-05T17:31:43.375153Z  INFO lazy_load_identity [...]
[...]
2024-07-05T17:33:51.987092Z  INFO Scanned 500 shards. [...]
```

In other words, to list 500 shards, speed is increased from 2:08 minutes
to 6 seconds.

Follow-up of  #8257, part of #5431

.github/actions/run-python-test-set/action.yml

@@ -114,6 +114,7 @@ runs:
         export PLATFORM=${PLATFORM:-github-actions-selfhosted}
         export POSTGRES_DISTRIB_DIR=${POSTGRES_DISTRIB_DIR:-/tmp/neon/pg_install}
         export DEFAULT_PG_VERSION=${PG_VERSION#v}
+        export LD_LIBRARY_PATH=${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/lib
 
         if [ "${BUILD_TYPE}" = "remote" ]; then
           export REMOTE_ENV=1
@@ -178,7 +179,15 @@ runs:
 
         # Wake up the cluster if we use remote neon instance
         if [ "${{ inputs.build_type }}" = "remote" ] && [ -n "${BENCHMARK_CONNSTR}" ]; then
-          ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/psql ${BENCHMARK_CONNSTR} -c "SELECT version();"
+          QUERIES=("SELECT version()")
+          if [[ "${PLATFORM}" = "neon"* ]]; then
+            QUERIES+=("SHOW neon.tenant_id")
+            QUERIES+=("SHOW neon.timeline_id")
+          fi
+
+          for q in "${QUERIES[@]}"; do
+            ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/psql ${BENCHMARK_CONNSTR} -c "${q}"
+          done
         fi
 
         # Run the tests.

.github/workflows/benchmarking.yml

@@ -239,11 +239,6 @@ jobs:
         path: /tmp/neon/
         prefix: latest
 
-    - name: Add Postgres binaries to PATH
-      run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
     - name: Create Neon Project
       if: contains(fromJson('["neon-captest-new", "neon-captest-freetier", "neonvm-captest-new", "neonvm-captest-freetier"]'), matrix.platform)
       id: create-neon-project
@@ -282,16 +277,6 @@ jobs:
 
         echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
-        QUERIES=("SELECT version()")
-        if [[ "${PLATFORM}" = "neon"* ]]; then
-          QUERIES+=("SHOW neon.tenant_id")
-          QUERIES+=("SHOW neon.timeline_id")
-        fi
-
-        for q in "${QUERIES[@]}"; do
-          psql ${CONNSTR} -c "${q}"
-        done
-
     - name: Benchmark init
       uses: ./.github/actions/run-python-test-set
       with:
@@ -377,25 +362,12 @@ jobs:
         path: /tmp/neon/
         prefix: latest
 
-    - name: Add Postgres binaries to PATH
-      run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
     - name: Set up Connection String
       id: set-up-connstr
       run: |
         CONNSTR=${{ secrets.BENCHMARK_PGVECTOR_CONNSTR }}
-        
-        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
-        QUERIES=("SELECT version()")
-        QUERIES+=("SHOW neon.tenant_id")
-        QUERIES+=("SHOW neon.timeline_id")
-        
-        for q in "${QUERIES[@]}"; do
-          psql ${CONNSTR} -c "${q}"
-        done
+        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
     - name: Benchmark pgvector hnsw indexing
       uses: ./.github/actions/run-python-test-set
@@ -417,12 +389,12 @@ jobs:
         test_selection: performance/test_perf_pgvector_queries.py
         run_in_parallel: false
         save_perf_report: ${{ env.SAVE_PERF_REPORT }}
-        extra_params: -m remote_cluster --timeout 21600 
+        extra_params: -m remote_cluster --timeout 21600
       env:
         BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
         VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
         PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
-    
+
     - name: Create Allure report
       if: ${{ !cancelled() }}
       uses: ./.github/actions/allure-report-generate
@@ -477,11 +449,6 @@ jobs:
         path: /tmp/neon/
         prefix: latest
 
-    - name: Add Postgres binaries to PATH
-      run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
     - name: Set up Connection String
       id: set-up-connstr
       run: |
@@ -503,16 +470,6 @@ jobs:
 
         echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
-        QUERIES=("SELECT version()")
-        if [[ "${PLATFORM}" = "neon"* ]]; then
-          QUERIES+=("SHOW neon.tenant_id")
-          QUERIES+=("SHOW neon.timeline_id")
-        fi
-
-        for q in "${QUERIES[@]}"; do
-          psql ${CONNSTR} -c "${q}"
-        done
-
     - name: ClickBench benchmark
       uses: ./.github/actions/run-python-test-set
       with:
@@ -580,11 +537,6 @@ jobs:
         path: /tmp/neon/
         prefix: latest
 
-    - name: Add Postgres binaries to PATH
-      run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
     - name: Get Connstring Secret Name
       run: |
         case "${PLATFORM}" in
@@ -613,16 +565,6 @@ jobs:
 
         echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
-        QUERIES=("SELECT version()")
-        if [[ "${PLATFORM}" = "neon"* ]]; then
-          QUERIES+=("SHOW neon.tenant_id")
-          QUERIES+=("SHOW neon.timeline_id")
-        fi
-
-        for q in "${QUERIES[@]}"; do
-          psql ${CONNSTR} -c "${q}"
-        done
-
     - name: Run TPC-H benchmark
       uses: ./.github/actions/run-python-test-set
       with:
@@ -681,11 +623,6 @@ jobs:
         path: /tmp/neon/
         prefix: latest
 
-    - name: Add Postgres binaries to PATH
-      run: |
-        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
-        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
-
     - name: Set up Connection String
       id: set-up-connstr
       run: |
@@ -707,16 +644,6 @@ jobs:
 
         echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
 
-        QUERIES=("SELECT version()")
-        if [[ "${PLATFORM}" = "neon"* ]]; then
-          QUERIES+=("SHOW neon.tenant_id")
-          QUERIES+=("SHOW neon.timeline_id")
-        fi
-
-        for q in "${QUERIES[@]}"; do
-          psql ${CONNSTR} -c "${q}"
-        done
-
     - name: Run user examples
       uses: ./.github/actions/run-python-test-set
       with:

.github/workflows/build-build-tools-image.yml

@@ -63,14 +63,16 @@ jobs:
           mkdir -p /tmp/.docker-custom
           echo DOCKER_CONFIG=/tmp/.docker-custom >> $GITHUB_ENV
 
-      - uses: docker/setup-buildx-action@v2
+      - uses: docker/setup-buildx-action@v3
+        with:
+          cache-binary: false
 
-      - uses: docker/login-action@v2
+      - uses: docker/login-action@v3
         with:
           username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
           password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
 
-      - uses: docker/build-push-action@v4
+      - uses: docker/build-push-action@v6
         with:
           context: .
           provenance: false
@@ -82,6 +84,7 @@ jobs:
           tags: neondatabase/build-tools:${{ inputs.image-tag }}-${{ matrix.arch }}
 
       - name: Remove custom docker config directory
+        if: always()
         run: |
           rm -rf /tmp/.docker-custom
 

.github/workflows/build_and_test.yml

@@ -30,7 +30,7 @@ jobs:
     if: ${{ !contains(github.event.pull_request.labels.*.name, 'run-no-ci') }}
     uses: ./.github/workflows/check-permissions.yml
     with:
-      github-event-name: ${{ github.event_name}}
+      github-event-name: ${{ github.event_name }}
 
   cancel-previous-e2e-tests:
     needs: [ check-permissions ]
@@ -335,6 +335,8 @@ jobs:
 
       - name: Run cargo build
         run: |
+          PQ_LIB_DIR=$(pwd)/pg_install/v16/lib
+          export PQ_LIB_DIR
           ${cov_prefix} mold -run cargo build $CARGO_FLAGS $CARGO_FEATURES --bins --tests
 
       # Do install *before* running rust tests because they might recompile the
@@ -383,6 +385,11 @@ jobs:
         env:
           NEXTEST_RETRIES: 3
         run: |
+          PQ_LIB_DIR=$(pwd)/pg_install/v16/lib
+          export PQ_LIB_DIR
+          LD_LIBRARY_PATH=$(pwd)/pg_install/v16/lib
+          export LD_LIBRARY_PATH
+
           #nextest does not yet support running doctests
           cargo test --doc $CARGO_FLAGS $CARGO_FEATURES
 
@@ -744,14 +751,16 @@ jobs:
         run: |
           mkdir -p .docker-custom
           echo DOCKER_CONFIG=$(pwd)/.docker-custom >> $GITHUB_ENV
-      - uses: docker/setup-buildx-action@v2
+      - uses: docker/setup-buildx-action@v3
+        with:
+          cache-binary: false
 
       - uses: docker/login-action@v3
         with:
           username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
           password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
 
-      - uses: docker/build-push-action@v5
+      - uses: docker/build-push-action@v6
         with:
           context: .
           build-args: |
@@ -822,11 +831,12 @@ jobs:
         run: |
           mkdir -p .docker-custom
           echo DOCKER_CONFIG=$(pwd)/.docker-custom >> $GITHUB_ENV
-      - uses: docker/setup-buildx-action@v2
+      - uses: docker/setup-buildx-action@v3
         with:
+          cache-binary: false
           # Disable parallelism for docker buildkit.
           # As we already build everything with `make -j$(nproc)`, running it in additional level of parallelisam blows up the Runner.
-          config-inline: |
+          buildkitd-config-inline: |
             [worker.oci]
               max-parallelism = 1
 
@@ -842,7 +852,7 @@ jobs:
           password: ${{ secrets.AWS_SECRET_KEY_DEV }}
 
       - name: Build compute-node image
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           build-args: |
@@ -861,7 +871,7 @@ jobs:
 
       - name: Build neon extensions test image
         if: matrix.version == 'v16'
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           build-args: |
@@ -882,7 +892,7 @@ jobs:
       - name: Build compute-tools image
         # compute-tools are Postgres independent, so build it only once
         if: matrix.version == 'v16'
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           target: compute-tools-image
           context: .
@@ -1358,3 +1368,31 @@ jobs:
     with:
       from-tag: ${{ needs.build-build-tools-image.outputs.image-tag }}
     secrets: inherit
+
+  # This job simplifies setting branch protection rules (in GitHub UI)
+  # by allowing to set only this job instead of listing many others.
+  # It also makes it easier to rename or parametrise jobs (using matrix)
+  # which requires changes in branch protection rules
+  #
+  # Note, that we can't add external check (like `neon-cloud-e2e`) we still need to use GitHub UI for that.
+  #
+  # https://github.com/neondatabase/neon/settings/branch_protection_rules
+  conclusion:
+    if: always()
+    # Format `needs` differently to make the list more readable.
+    # Usually we do `needs: [...]`
+    needs:
+      - check-codestyle-python
+      - check-codestyle-rust
+      - regress-tests
+      - test-images
+    runs-on: ubuntu-22.04
+    steps:
+      # The list of possible results:
+      # https://docs.github.com/en/actions/learn-github-actions/contexts#needs-context
+      - name: Fail the job if any of the dependencies do not succeed
+        run: exit 1
+        if: |
+          contains(needs.*.result, 'failure')
+          || contains(needs.*.result, 'cancelled')
+          || contains(needs.*.result, 'skipped')

.github/workflows/neon_extra_builds.yml

@@ -232,12 +232,19 @@ jobs:
 
       - name: Run cargo build
         run: |
+          PQ_LIB_DIR=$(pwd)/pg_install/v16/lib
+          export PQ_LIB_DIR
           mold -run cargo build --locked $CARGO_FLAGS $CARGO_FEATURES --bins --tests -j$(nproc)
 
       - name: Run cargo test
         env:
           NEXTEST_RETRIES: 3
         run: |
+          PQ_LIB_DIR=$(pwd)/pg_install/v16/lib
+          export PQ_LIB_DIR
+          LD_LIBRARY_PATH=$(pwd)/pg_install/v16/lib
+          export LD_LIBRARY_PATH
+
           cargo nextest run $CARGO_FEATURES -j$(nproc)
 
           # Run separate tests for real S3
@@ -378,7 +385,7 @@ jobs:
         run: make walproposer-lib -j$(nproc)
 
       - name: Produce the build stats
-        run: cargo build --all --release --timings -j$(nproc)
+        run: PQ_LIB_DIR=$(pwd)/pg_install/v16/lib cargo build --all --release --timings -j$(nproc)
 
       - name: Upload the build stats
         id: upload-stats

.github/workflows/periodic_pagebench.yml

@@ -0,0 +1,155 @@
+name: Periodic pagebench performance test on dedicated EC2 machine in eu-central-1 region
+
+on:
+  schedule:
+    # * is a special character in YAML so you have to quote this string
+    #          ┌───────────── minute (0 - 59)
+    #          │ ┌───────────── hour (0 - 23)
+    #          │ │ ┌───────────── day of the month (1 - 31)
+    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
+    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
+    - cron:  '0 18 * * *' # Runs at 6 PM UTC every day
+  workflow_dispatch: # Allows manual triggering of the workflow
+    inputs:
+      commit_hash:
+        type: string
+        description: 'The long neon repo commit hash for the system under test (pageserver) to be tested.'
+        required: false
+        default: ''
+
+defaults:
+  run:
+    shell: bash -euo pipefail {0}
+
+concurrency:
+  group: ${{ github.workflow }}
+  cancel-in-progress: false
+
+jobs:
+  trigger_bench_on_ec2_machine_in_eu_central_1:
+    runs-on: [ self-hosted, gen3, small ]
+    container:
+      image: neondatabase/build-tools:pinned
+      credentials:
+        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
+        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+      options: --init
+    timeout-minutes: 360  # Set the timeout to 6 hours
+    env:
+      API_KEY: ${{ secrets.PERIODIC_PAGEBENCH_EC2_RUNNER_API_KEY }}
+      RUN_ID: ${{ github.run_id }}
+      AWS_ACCESS_KEY_ID: ${{ secrets.AWS_EC2_US_TEST_RUNNER_ACCESS_KEY_ID }}
+      AWS_SECRET_ACCESS_KEY : ${{ secrets.AWS_EC2_US_TEST_RUNNER_ACCESS_KEY_SECRET }}
+      AWS_DEFAULT_REGION : "eu-central-1"
+      AWS_INSTANCE_ID : "i-02a59a3bf86bc7e74"
+    steps:
+    # we don't need the neon source code because we run everything remotely
+    # however we still need the local github actions to run the allure step below
+    - uses: actions/checkout@v4
+
+    - name: Show my own (github runner) external IP address - usefull for IP allowlisting
+      run: curl https://ifconfig.me
+
+    - name: Start EC2 instance and wait for the instance to boot up
+      run: |
+        aws ec2 start-instances --instance-ids $AWS_INSTANCE_ID
+        aws ec2 wait instance-running --instance-ids $AWS_INSTANCE_ID
+        sleep 60 # sleep some time to allow cloudinit and our API server to start up
+
+    - name: Determine public IP of the EC2 instance and set env variable EC2_MACHINE_URL_US
+      run: |
+        public_ip=$(aws ec2 describe-instances --instance-ids $AWS_INSTANCE_ID --query 'Reservations[*].Instances[*].PublicIpAddress' --output text)
+        echo "Public IP of the EC2 instance: $public_ip"
+        echo "EC2_MACHINE_URL_US=https://${public_ip}:8443" >> $GITHUB_ENV
+
+    - name: Determine commit hash
+      env:
+        INPUT_COMMIT_HASH: ${{ github.event.inputs.commit_hash }}
+      run: |
+        if [ -z "$INPUT_COMMIT_HASH" ]; then
+          echo "COMMIT_HASH=$(curl -s https://api.github.com/repos/neondatabase/neon/commits/main | jq -r '.sha')" >> $GITHUB_ENV
+        else
+          echo "COMMIT_HASH=$INPUT_COMMIT_HASH" >> $GITHUB_ENV
+        fi
+
+    - name: Start Bench with run_id   
+      run: |
+        curl -k -X 'POST' \
+        "${EC2_MACHINE_URL_US}/start_test/${GITHUB_RUN_ID}" \
+        -H 'accept: application/json' \
+        -H 'Content-Type: application/json' \
+        -H "Authorization: Bearer $API_KEY" \
+        -d "{\"neonRepoCommitHash\": \"${COMMIT_HASH}\"}"
+
+    - name: Poll Test Status
+      id: poll_step
+      run: |
+        status=""
+        while [[ "$status" != "failure" && "$status" != "success" ]]; do
+          response=$(curl -k -X 'GET' \
+          "${EC2_MACHINE_URL_US}/test_status/${GITHUB_RUN_ID}" \
+          -H 'accept: application/json' \
+          -H "Authorization: Bearer $API_KEY")
+          echo "Response: $response"
+          set +x
+          status=$(echo $response | jq -r '.status')
+          echo "Test status: $status"
+          if [[ "$status" == "failure" ]]; then
+            echo "Test failed"
+            exit 1 # Fail the job step if status is failure
+          elif [[ "$status" == "success" || "$status" == "null" ]]; then
+            break
+          elif [[ "$status" == "too_many_runs" ]]; then
+            echo "Too many runs already running"
+            echo "too_many_runs=true" >> "$GITHUB_OUTPUT"
+            exit 1
+          fi
+
+          sleep 60 # Poll every 60 seconds
+        done
+
+    - name: Retrieve Test Logs
+      if: always() && steps.poll_step.outputs.too_many_runs != 'true'
+      run: |
+        curl -k -X 'GET' \
+        "${EC2_MACHINE_URL_US}/test_log/${GITHUB_RUN_ID}" \
+        -H 'accept: application/gzip' \
+        -H "Authorization: Bearer $API_KEY" \
+        --output "test_log_${GITHUB_RUN_ID}.gz"
+    
+    - name: Unzip Test Log and Print it into this job's log
+      if: always() && steps.poll_step.outputs.too_many_runs != 'true'
+      run: |
+        gzip -d "test_log_${GITHUB_RUN_ID}.gz"
+        cat "test_log_${GITHUB_RUN_ID}"
+
+    - name: Create Allure report
+      env:
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
+      if: ${{ !cancelled() }}
+      uses: ./.github/actions/allure-report-generate
+
+    - name: Post to a Slack channel
+      if: ${{ github.event.schedule && failure() }}
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C033QLM5P7D" # dev-staging-stream
+        slack-message: "Periodic pagebench testing on dedicated hardware: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
+
+    - name: Cleanup Test Resources
+      if: always() 
+      run: |
+        curl -k -X 'POST' \
+        "${EC2_MACHINE_URL_US}/cleanup_test/${GITHUB_RUN_ID}" \
+        -H 'accept: application/json' \
+        -H "Authorization: Bearer $API_KEY" \
+        -d ''
+
+    - name: Stop EC2 instance and wait for the instance to be stopped
+      if: always() && steps.poll_step.outputs.too_many_runs != 'true'
+      run: |
+        aws ec2 stop-instances --instance-ids $AWS_INSTANCE_ID
+        aws ec2 wait instance-stopped --instance-ids $AWS_INSTANCE_ID

.github/workflows/pg-clients.yml

@@ -0,0 +1,115 @@
+name: Test Postgres client libraries
+
+on:
+  schedule:
+    # * is a special character in YAML so you have to quote this string
+    #          ┌───────────── minute (0 - 59)
+    #          │ ┌───────────── hour (0 - 23)
+    #          │ │ ┌───────────── day of the month (1 - 31)
+    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
+    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
+    - cron:  '23 02 * * *' # run once a day, timezone is utc
+  pull_request:
+    paths:
+      - '.github/workflows/pg-clients.yml'
+      - 'test_runner/pg_clients/**'
+      - 'poetry.lock'
+  workflow_dispatch:
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref_name }}
+  cancel-in-progress: ${{ github.event_name == 'pull_request' }}
+
+defaults:
+  run:
+    shell: bash -euxo pipefail {0}
+
+env:
+  DEFAULT_PG_VERSION: 16
+  PLATFORM: neon-captest-new
+  AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
+  AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
+  AWS_DEFAULT_REGION: eu-central-1
+
+jobs:
+  check-permissions:
+    if: ${{ !contains(github.event.pull_request.labels.*.name, 'run-no-ci') }}
+    uses: ./.github/workflows/check-permissions.yml
+    with:
+      github-event-name: ${{ github.event_name }}
+
+  check-build-tools-image:
+    needs: [ check-permissions ]
+    uses: ./.github/workflows/check-build-tools-image.yml
+
+  build-build-tools-image:
+    needs: [ check-build-tools-image ]
+    uses: ./.github/workflows/build-build-tools-image.yml
+    with:
+      image-tag: ${{ needs.check-build-tools-image.outputs.image-tag }}
+    secrets: inherit
+
+  test-postgres-client-libs:
+    needs: [ build-build-tools-image ]
+    runs-on: ubuntu-22.04
+
+    container:
+      image: ${{ needs.build-build-tools-image.outputs.image }}
+      credentials:
+        username: ${{ secrets.NEON_DOCKERHUB_USERNAME }}
+        password: ${{ secrets.NEON_DOCKERHUB_PASSWORD }}
+      options: --init --user root
+
+    steps:
+    - uses: actions/checkout@v4
+
+    - name: Download Neon artifact
+      uses: ./.github/actions/download
+      with:
+        name: neon-${{ runner.os }}-${{ runner.arch }}-release-artifact
+        path: /tmp/neon/
+        prefix: latest
+
+    - name: Create Neon Project
+      id: create-neon-project
+      uses: ./.github/actions/neon-project-create
+      with:
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
+
+    - name: Run tests
+      uses: ./.github/actions/run-python-test-set
+      with:
+        build_type: remote
+        test_selection: pg_clients
+        run_in_parallel: false
+        extra_params: -m remote_cluster
+        pg_version: ${{ env.DEFAULT_PG_VERSION }}
+      env:
+        BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
+
+    - name: Delete Neon Project
+      if: always()
+      uses: ./.github/actions/neon-project-delete
+      with:
+        project_id: ${{ steps.create-neon-project.outputs.project_id }}
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+
+    - name: Create Allure report
+      if: ${{ !cancelled() }}
+      id: create-allure-report
+      uses: ./.github/actions/allure-report-generate
+      with:
+        store-test-results-into-db: true
+      env:
+        REGRESS_TEST_RESULT_CONNSTR_NEW: ${{ secrets.REGRESS_TEST_RESULT_CONNSTR_NEW }}
+
+    - name: Post to a Slack channel
+      if: github.event.schedule && failure()
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C06KHQVQ7U3" # on-call-qa-staging-stream
+        slack-message: |
+          Testing Postgres clients: <${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}|${{ job.status }}> (<${{ steps.create-allure-report.outputs.report-url }}|test report>)
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}

.github/workflows/pg_clients.yml

@@ -1,98 +0,0 @@
-name: Test Postgres client libraries
-
-on:
-  schedule:
-    # * is a special character in YAML so you have to quote this string
-    #          ┌───────────── minute (0 - 59)
-    #          │ ┌───────────── hour (0 - 23)
-    #          │ │ ┌───────────── day of the month (1 - 31)
-    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
-    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
-    - cron:  '23 02 * * *' # run once a day, timezone is utc
-
-  workflow_dispatch:
-
-concurrency:
-  # Allow only one workflow per any non-`main` branch.
-  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
-  cancel-in-progress: true
-
-jobs:
-  test-postgres-client-libs:
-    # TODO: switch to gen2 runner, requires docker
-    runs-on: ubuntu-22.04
-
-    env:
-      DEFAULT_PG_VERSION: 14
-      TEST_OUTPUT: /tmp/test_output
-
-    steps:
-    - name: Checkout
-      uses: actions/checkout@v4
-
-    - uses: actions/setup-python@v4
-      with:
-        python-version: 3.9
-
-    - name: Install Poetry
-      uses: snok/install-poetry@v1
-
-    - name: Cache poetry deps
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pypoetry/virtualenvs
-        key: v2-${{ runner.os }}-${{ runner.arch }}-python-deps-ubunutu-latest-${{ hashFiles('poetry.lock') }}
-
-    - name: Install Python deps
-      shell: bash -euxo pipefail {0}
-      run: ./scripts/pysync
-
-    - name: Create Neon Project
-      id: create-neon-project
-      uses: ./.github/actions/neon-project-create
-      with:
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
-
-    - name: Run pytest
-      env:
-        REMOTE_ENV: 1
-        BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
-        POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
-      shell: bash -euxo pipefail {0}
-      run: |
-        # Test framework expects we have psql binary;
-        # but since we don't really need it in this test, let's mock it
-        mkdir -p "$POSTGRES_DISTRIB_DIR/v${DEFAULT_PG_VERSION}/bin" && touch "$POSTGRES_DISTRIB_DIR/v${DEFAULT_PG_VERSION}/bin/psql";
-        ./scripts/pytest \
-          --junitxml=$TEST_OUTPUT/junit.xml \
-          --tb=short \
-          --verbose \
-          -m "remote_cluster" \
-          -rA "test_runner/pg_clients"
-
-    - name: Delete Neon Project
-      if: ${{ always() }}
-      uses: ./.github/actions/neon-project-delete
-      with:
-        project_id: ${{ steps.create-neon-project.outputs.project_id }}
-        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
-
-    # We use GitHub's action upload-artifact because `ubuntu-latest` doesn't have configured AWS CLI.
-    # It will be fixed after switching to gen2 runner
-    - name: Upload python test logs
-      if: always()
-      uses: actions/upload-artifact@v4
-      with:
-        retention-days: 7
-        name: python-test-pg_clients-${{ runner.os }}-${{ runner.arch }}-stage-logs
-        path: ${{ env.TEST_OUTPUT }}
-
-    - name: Post to a Slack channel
-      if: ${{ github.event.schedule && failure() }}
-      uses: slackapi/slack-github-action@v1
-      with:
-        channel-id: "C033QLM5P7D" # dev-staging-stream
-        slack-message: "Testing Postgres clients: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
-      env:
-        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}

Cargo.lock

@@ -6811,6 +6811,7 @@ dependencies = [
  "tokio-stream",
  "tokio-tar",
  "tokio-util",
+ "toml_edit 0.19.10",
  "tracing",
  "tracing-error",
  "tracing-subscriber",

Dockerfile

@@ -42,12 +42,13 @@ ARG CACHEPOT_BUCKET=neon-github-dev
 COPY --from=pg-build /home/nonroot/pg_install/v14/include/postgresql/server pg_install/v14/include/postgresql/server
 COPY --from=pg-build /home/nonroot/pg_install/v15/include/postgresql/server pg_install/v15/include/postgresql/server
 COPY --from=pg-build /home/nonroot/pg_install/v16/include/postgresql/server pg_install/v16/include/postgresql/server
+COPY --from=pg-build /home/nonroot/pg_install/v16/lib                       pg_install/v16/lib
 COPY --chown=nonroot . .
 
 # Show build caching stats to check if it was used in the end.
 # Has to be the part of the same RUN since cachepot daemon is killed in the end of this RUN, losing the compilation stats.
 RUN set -e \
-    && RUSTFLAGS="-Clinker=clang -Clink-arg=-fuse-ld=mold -Clink-arg=-Wl,--no-rosegment" cargo build  \
+    && PQ_LIB_DIR=$(pwd)/pg_install/v16/lib RUSTFLAGS="-Clinker=clang -Clink-arg=-fuse-ld=mold -Clink-arg=-Wl,--no-rosegment" cargo build \
       --bin pg_sni_router  \
       --bin pageserver  \
       --bin pagectl  \
@@ -56,6 +57,7 @@ RUN set -e \
       --bin storage_controller  \
       --bin proxy  \
       --bin neon_local \
+      --bin storage_scrubber \
       --locked --release \
     && cachepot -s
 
@@ -82,6 +84,7 @@ COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_broker
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_controller  /usr/local/bin
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/proxy               /usr/local/bin
 COPY --from=build --chown=neon:neon /home/nonroot/target/release/neon_local          /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_scrubber    /usr/local/bin
 
 COPY --from=pg-build /home/nonroot/pg_install/v14 /usr/local/v14/
 COPY --from=pg-build /home/nonroot/pg_install/v15 /usr/local/v15/

Dockerfile.build-tools

@@ -1,5 +1,13 @@
 FROM debian:bullseye-slim
 
+# Use ARG as a build-time environment variable here to allow.
+# It's not supposed to be set outside.
+# Alternatively it can be obtained using the following command
+# ```
+# . /etc/os-release && echo "${VERSION_CODENAME}"
+# ```
+ARG DEBIAN_VERSION_CODENAME=bullseye
+
 # Add nonroot user
 RUN useradd -ms /bin/bash nonroot -b /home
 SHELL ["/bin/bash", "-c"]
@@ -26,7 +34,6 @@ RUN set -e \
         liblzma-dev \
         libncurses5-dev \
         libncursesw5-dev \
-        libpq-dev \
         libreadline-dev \
         libseccomp-dev \
         libsqlite3-dev \
@@ -67,12 +74,24 @@ RUN curl -sL "https://github.com/peak/s5cmd/releases/download/v${S5CMD_VERSION}/
 # LLVM
 ENV LLVM_VERSION=18
 RUN curl -fsSL 'https://apt.llvm.org/llvm-snapshot.gpg.key' | apt-key add - \
-    && echo "deb http://apt.llvm.org/bullseye/ llvm-toolchain-bullseye-${LLVM_VERSION} main" > /etc/apt/sources.list.d/llvm.stable.list \
+    && echo "deb http://apt.llvm.org/${DEBIAN_VERSION_CODENAME}/ llvm-toolchain-${DEBIAN_VERSION_CODENAME}-${LLVM_VERSION} main" > /etc/apt/sources.list.d/llvm.stable.list \
     && apt update \
     && apt install -y clang-${LLVM_VERSION} llvm-${LLVM_VERSION} \
     && bash -c 'for f in /usr/bin/clang*-${LLVM_VERSION} /usr/bin/llvm*-${LLVM_VERSION}; do ln -s "${f}" "${f%-${LLVM_VERSION}}"; done' \
     && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
 
+# Install docker
+RUN curl -fsSL https://download.docker.com/linux/ubuntu/gpg | gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg \
+    && echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian ${DEBIAN_VERSION_CODENAME} stable" > /etc/apt/sources.list.d/docker.list \
+    && apt update \
+    && apt install -y docker-ce docker-ce-cli \
+    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+
+# Configure sudo & docker
+RUN usermod -aG sudo nonroot && \
+    echo '%sudo ALL=(ALL) NOPASSWD:ALL' >> /etc/sudoers && \
+    usermod -aG docker nonroot
+
 # AWS CLI
 RUN curl "https://awscli.amazonaws.com/awscli-exe-linux-$(uname -m).zip" -o "awscliv2.zip" \
     && unzip -q awscliv2.zip \

compute_tools/src/compute.rs

@@ -873,9 +873,8 @@ impl ComputeNode {
         Ok(())
     }
 
-    // We could've wrapped this around `pg_ctl reload`, but right now we don't use
-    // `pg_ctl` for start / stop, so this just seems much easier to do as we already
-    // have opened connection to Postgres and superuser access.
+    // Wrapped this around `pg_ctl reload`, but right now we don't use
+    // `pg_ctl` for start / stop.
     #[instrument(skip_all)]
     fn pg_reload_conf(&self) -> Result<()> {
         let pgctl_bin = Path::new(&self.pgbin).parent().unwrap().join("pg_ctl");

compute_tools/src/pg_helpers.rs

@@ -489,7 +489,7 @@ pub fn handle_postgres_logs(stderr: std::process::ChildStderr) -> JoinHandle<()>
 /// Read Postgres logs from `stderr` until EOF. Buffer is flushed on one of the following conditions:
 /// - next line starts with timestamp
 /// - EOF
-/// - no new lines were written for the last second
+/// - no new lines were written for the last 100 milliseconds
 async fn handle_postgres_logs_async(stderr: tokio::process::ChildStderr) -> Result<()> {
     let mut lines = tokio::io::BufReader::new(stderr).lines();
     let timeout_duration = Duration::from_millis(100);

control_plane/src/local_env.rs

@@ -325,11 +325,16 @@ impl LocalEnv {
         }
     }
 
-    pub fn pg_bin_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
-        Ok(self.pg_distrib_dir(pg_version)?.join("bin"))
+    pub fn pg_dir(&self, pg_version: u32, dir_name: &str) -> anyhow::Result<PathBuf> {
+        Ok(self.pg_distrib_dir(pg_version)?.join(dir_name))
     }
+
+    pub fn pg_bin_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
+        self.pg_dir(pg_version, "bin")
+    }
+
     pub fn pg_lib_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
-        Ok(self.pg_distrib_dir(pg_version)?.join("lib"))
+        self.pg_dir(pg_version, "lib")
     }
 
     pub fn pageserver_bin(&self) -> PathBuf {

control_plane/src/storage_controller.rs

@@ -155,16 +155,16 @@ impl StorageController {
         .expect("non-Unicode path")
     }
 
-    /// Find the directory containing postgres binaries, such as `initdb` and `pg_ctl`
+    /// Find the directory containing postgres subdirectories, such `bin` and `lib`
     ///
     /// This usually uses STORAGE_CONTROLLER_POSTGRES_VERSION of postgres, but will fall back
     /// to other versions if that one isn't found.  Some automated tests create circumstances
     /// where only one version is available in pg_distrib_dir, such as `test_remote_extensions`.
-    pub async fn get_pg_bin_dir(&self) -> anyhow::Result<Utf8PathBuf> {
+    async fn get_pg_dir(&self, dir_name: &str) -> anyhow::Result<Utf8PathBuf> {
         let prefer_versions = [STORAGE_CONTROLLER_POSTGRES_VERSION, 15, 14];
 
         for v in prefer_versions {
-            let path = Utf8PathBuf::from_path_buf(self.env.pg_bin_dir(v)?).unwrap();
+            let path = Utf8PathBuf::from_path_buf(self.env.pg_dir(v, dir_name)?).unwrap();
             if tokio::fs::try_exists(&path).await? {
                 return Ok(path);
             }
@@ -172,11 +172,20 @@ impl StorageController {
 
         // Fall through
         anyhow::bail!(
-            "Postgres binaries not found in {}",
-            self.env.pg_distrib_dir.display()
+            "Postgres directory '{}' not found in {}",
+            dir_name,
+            self.env.pg_distrib_dir.display(),
         );
     }
 
+    pub async fn get_pg_bin_dir(&self) -> anyhow::Result<Utf8PathBuf> {
+        self.get_pg_dir("bin").await
+    }
+
+    pub async fn get_pg_lib_dir(&self) -> anyhow::Result<Utf8PathBuf> {
+        self.get_pg_dir("lib").await
+    }
+
     /// Readiness check for our postgres process
     async fn pg_isready(&self, pg_bin_dir: &Utf8Path) -> anyhow::Result<bool> {
         let bin_path = pg_bin_dir.join("pg_isready");
@@ -229,12 +238,17 @@ impl StorageController {
             .unwrap()
             .join("storage_controller_db");
         let pg_bin_dir = self.get_pg_bin_dir().await?;
+        let pg_lib_dir = self.get_pg_lib_dir().await?;
         let pg_log_path = pg_data_path.join("postgres.log");
 
         if !tokio::fs::try_exists(&pg_data_path).await? {
             // Initialize empty database
             let initdb_path = pg_bin_dir.join("initdb");
             let mut child = Command::new(&initdb_path)
+                .envs(vec![
+                    ("LD_LIBRARY_PATH".to_owned(), pg_lib_dir.to_string()),
+                    ("DYLD_LIBRARY_PATH".to_owned(), pg_lib_dir.to_string()),
+                ])
                 .args(["-D", pg_data_path.as_ref()])
                 .spawn()
                 .expect("Failed to spawn initdb");
@@ -269,7 +283,10 @@ impl StorageController {
             &self.env.base_data_dir,
             pg_bin_dir.join("pg_ctl").as_std_path(),
             db_start_args,
-            [],
+            vec![
+                ("LD_LIBRARY_PATH".to_owned(), pg_lib_dir.to_string()),
+                ("DYLD_LIBRARY_PATH".to_owned(), pg_lib_dir.to_string()),
+            ],
             background_process::InitialPidFile::Create(self.postgres_pid_file()),
             retry_timeout,
             || self.pg_isready(&pg_bin_dir),
@@ -324,7 +341,10 @@ impl StorageController {
             &self.env.base_data_dir,
             &self.env.storage_controller_bin(),
             args,
-            [],
+            vec![
+                ("LD_LIBRARY_PATH".to_owned(), pg_lib_dir.to_string()),
+                ("DYLD_LIBRARY_PATH".to_owned(), pg_lib_dir.to_string()),
+            ],
             background_process::InitialPidFile::Create(self.pid_file()),
             retry_timeout,
             || async {

docs/rfcs/033-storage-controller-drain-and-fill.md

@@ -0,0 +1,345 @@
+# Graceful Restarts of Storage Controller Managed Clusters
+
+## Summary
+This RFC describes new storage controller APIs for draining and filling tenant shards from/on pageserver nodes.
+It also covers how these new APIs should be used by an orchestrator (e.g. Ansible) in order to implement
+graceful cluster restarts.
+
+## Motivation
+
+Pageserver restarts cause read availablity downtime for tenants.
+
+For example pageserver-3 @ us-east-1 was unavailable for a randomly
+picked tenant (which requested on-demand activation) for around 30 seconds
+during the restart at 2024-04-03 16:37 UTC.
+
+Note that lots of shutdowns on loaded pageservers do not finish within the
+[10 second systemd enforced timeout](https://github.com/neondatabase/aws/blob/0a5280b383e43c063d43cbf87fa026543f6d6ad4/.github/ansible/systemd/pageserver.service#L16). This means we are shutting down without flushing ephemeral layers
+and have to reingest data in order to serve requests after restarting, potentially making first request latencies worse.
+
+This problem is not yet very acutely felt in storage controller managed pageservers since
+tenant density is much lower there. However, we are planning on eventually migrating all
+pageservers to storage controller management, so it makes sense to solve the issue proactively.
+
+## Requirements
+
+- Pageserver re-deployments cause minimal downtime for tenants
+- The storage controller exposes HTTP API hooks for draining and filling tenant shards
+from a given pageserver. Said hooks can be used by an orchestrator proces or a human operator.
+- The storage controller exposes some HTTP API to cancel draining and filling background operations.
+- Failures to drain or fill the node should not be fatal. In such cases, cluster restarts should proceed
+as usual (with downtime).
+- Progress of draining/filling is visible through metrics
+
+## Non Goals
+
+- Integration with the control plane
+- Graceful restarts for large non-HA tenants.
+
+## Impacted Components
+
+- storage controller
+- deployment orchestrator (i.e. Ansible)
+- pageserver (indirectly)
+
+## Terminology
+
+** Draining ** is the process through which all tenant shards that can be migrated from a given pageserver
+are distributed across the rest of the cluster.
+
+** Filling ** is the symmetric opposite of draining. In this process tenant shards are migrated onto a given
+pageserver until the cluster reaches a resonable, quiescent distribution of tenant shards across pageservers.
+
+** Node scheduling policies ** act as constraints to the scheduler. For instance, when a
+node is set in the `Paused` policy, no further shards will be scheduled on it.
+
+** Node ** is a pageserver. Term is used interchangeably in this RFC.
+
+** Deployment orchestrator ** is a generic term for whatever drives our deployments.
+Currently, it's an Ansible playbook.
+
+## Background
+
+### Storage Controller Basics (skip if already familiar)
+
+Fundamentally, the storage controller is a reconciler which aims to move from the observed mapping between pageservers and tenant shards to an intended mapping. Pageserver nodes and tenant shards metadata is durably persisted in a database, but note that the mapping between the two entities is not durably persisted. Instead, this mapping (*observed state*) is constructed at startup by sending `GET location_config` requests to registered pageservers.
+
+An internal scheduler maps tenant shards to pageservers while respecting certain constraints. The result of scheduling is the *intent state*. When the intent state changes, a *reconciliation* will inform pageservers about the new assigment via `PUT location_config` requests and will notify the compute via the configured hook.
+
+### Background Optimizations
+
+The storage controller performs scheduling optimizations in the background. It will
+migrate attachments to warm secondaries and replace secondaries in order to balance
+the cluster out.
+
+### Reconciliations Concurrency Limiting
+
+There's a hard limit on the number of reconciles that the storage controller
+can have in flight at any given time. To get an idea of scales, the limit is
+128 at the time of writing.
+
+## Implementation
+
+Note: this section focuses on the core functionality of the graceful restart process.
+It doesn't neccesarily describe the most efficient approach. Optimizations are described
+separately in a later section.
+
+### Overall Flow
+
+This section describes how to implement graceful restarts from the perspective
+of Ansible, the deployment orchestrator. Pageservers are already restarted sequentially.
+The orchestrator shall implement the following epilogue and prologue steps for each
+pageserver restart:
+
+#### Prologue
+
+The orchestrator shall first fetch the pageserver node id from the control plane or
+the pageserver it aims to restart directly. Next, it issues an HTTP request
+to the storage controller in order to start the drain of said pageserver node.
+All error responses are retried with a short back-off. When a 202 (Accepted)
+HTTP code is returned, the drain has started. Now the orchestrator polls the
+node status endpoint exposed by the storage controller in order to await the
+end of the drain process. When the `policy` field of the node status response
+becomes `PauseForRestart`, the drain has completed and the orchestrator can
+proceed with restarting the pageserver.
+
+The prologue is subject to an overall timeout. It will have a value in the ballpark
+of minutes. As storage controller managed pageservers become more loaded this timeout
+will likely have to increase.
+
+#### Epilogue
+
+After restarting the pageserver, the orchestrator issues an HTTP request
+to the storage controller to kick off the filling process. This API call
+may be retried for all error codes with a short backoff. This also serves
+as a synchronization primitive as the fill will be refused if the pageserver
+has not yet re-attached to the storage controller. When a 202(Accepted) HTTP
+code is returned, the fill has started. Now the orchestrator polls the node
+status endpoint exposed by the storage controller in order to await the end of
+the filling process. When the `policy` field of the node status response becomes
+`Active`, the fill has completed and the orchestrator may proceed to the next pageserver.
+
+Again, the epilogue is subject to an overall timeout. We can start off with
+using the same timeout as for the prologue, but can also consider relying on
+the storage controller's background optimizations with a shorter timeout.
+
+In the case that the deployment orchestrator times out, it attempts to cancel
+the fill. This operation shall be retried with a short back-off. If it ultimately
+fails it will require manual intervention to set the nodes scheduling policy to
+`NodeSchedulingPolicy::Active`. Not doing that is not immediately problematic,
+but it constrains the scheduler as mentioned previously.
+
+### Node Scheduling Policy State Machine
+
+The state machine below encodes the behaviours discussed above and
+the various failover situations described in a later section.
+
+Assuming no failures and/or timeouts the flow should be:
+`Active -> Draining -> PauseForRestart -> Active -> Filling -> Active`
+
+```
+                          Operator requested drain
+               +-----------------------------------------+
+               |                                         |
+       +-------+-------+                         +-------v-------+
+       |               |                         |               |
+       |     Pause     |             +----------->    Draining   +----------+
+       |               |             |           |               |          |
+       +---------------+             |           +-------+-------+          |
+                                     |                   |                  |
+                                     |                   |                  |
+                      Drain requested|                   |                  |
+                                     |                   |Drain complete    | Drain failed
+                                     |                   |                  | Cancelled/PS reattach/Storcon restart
+                                     |                   |                  |
+                             +-------+-------+           |                  |
+                             |               |           |                  |
+               +-------------+    Active     <-----------+------------------+
+               |             |               |           |
+Fill requested |             +---^---^-------+           |
+               |                 |   |                   |
+               |                 |   |                   |
+               |                 |   |                   |
+               |   Fill completed|   |                   |
+               |                 |   |PS reattach        |
+               |                 |   |after restart      |
+       +-------v-------+         |   |           +-------v-------+
+       |               |         |   |           |               |
+       |    Filling    +---------+   +-----------+PauseForRestart|
+       |               |                         |               |
+       +---------------+                         +---------------+
+```
+
+### Draining/Filling APIs
+
+The storage controller API to trigger the draining of a given node is:
+`PUT /v1/control/node/:node_id/{drain,fill}`.
+
+The following HTTP non-success return codes are used.
+All of them are safely retriable from the perspective of the storage controller.
+- 404: Requested node was not found
+- 503: Requested node is known to the storage controller, but unavailable
+- 412: Drain precondition failed: there is no other node to drain to or the node's schedulling policy forbids draining
+- 409: A {drain, fill} is already in progress. Only one such background operation
+is allowed per node.
+
+When the drain is accepted and commenced a 202 HTTP code is returned.
+
+Drains and fills shall be cancellable by the deployment orchestrator or a
+human operator via: `DELETE /v1/control/node/:node_id/{drain,fill}`. A 200
+response is returned when the cancelation is successful. Errors are retriable.
+
+### Drain Process
+
+Before accpeting a drain request the following validations is applied:
+* Ensure that the node is known the storage controller
+* Ensure that the schedulling policy is `NodeSchedulingPolicy::Active` or `NodeSchedulingPolicy::Pause`
+* Ensure that another drain or fill is not already running on the node
+* Ensure that a drain is possible (i.e. check that there is at least one
+schedulable node to drain to)
+
+After accepting the drain, the scheduling policy of the node is set to
+`NodeSchedulingPolicy::Draining` and persisted in both memory and the database.
+This disallows the optimizer from adding or removing shards from the node which
+is desirable to avoid them racing.
+
+Next, a separate Tokio task is spawned to manage the draining. For each tenant
+shard attached to the node being drained, demote the node to a secondary and
+attempt to schedule the node away. Scheduling might fail due to unsatisfiable
+constraints, but that is fine. Draining is a best effort process since it might
+not always be possible to cut over all shards.
+
+Importantly, this task manages the concurrency of issued reconciles in order to
+avoid drowning out the target pageservers and to allow other important reconciles
+to proceed.
+
+Once the triggered reconciles have finished or timed out, set the node's scheduling
+policy to `NodeSchedulingPolicy::PauseForRestart` to signal the end of the drain.
+
+A note on non HA tenants: These tenants do not have secondaries, so by the description
+above, they would not be migrated. It makes sense to skip them (especially the large ones)
+since, depending on tenant size, this might be more disruptive than the restart since the
+pageserver we've moved to do will need to on-demand download the entire working set for the tenant.
+We can consider expanding to small non-HA tenants in the future.
+
+### Fill Process
+
+Before accpeting a fill request the following validations is applied:
+* Ensure that the node is known the storage controller
+* Ensure that the schedulling policy is `NodeSchedulingPolicy::Active`.
+This is the only acceptable policy for the fill starting state. When a node re-attaches,
+it set the scheduling policy to `NodeSchedulingPolicy::Active` if it was equal to
+`NodeSchedulingPolicy::PauseForRestart` or `NodeSchedulingPolicy::Draining` (possible end states for a node drain).
+* Ensure that another drain or fill is not already running on the node
+
+After accepting the drain, the scheduling policy of the node is set to
+`NodeSchedulingPolicy::Filling` and persisted in both memory and the database.
+This disallows the optimizer from adding or removing shards from the node which
+is desirable to avoid them racing.
+
+Next, a separate Tokio task is spawned to manage the draining. For each tenant
+shard where the filled node is a secondary, promote the secondary. This is done
+until we run out of shards or the counts of attached shards become balanced across
+the cluster.
+
+Like for draining, the concurrency of spawned reconciles is limited.
+
+### Failure Modes & Handling
+
+Failures are generally handled by transition back into the `Active`
+(neutral) state. This simplifies the implementation greatly at the
+cost of adding transitions to the state machine. For example, we
+could detect the `Draining` state upon restart and proceed with a drain,
+but how should the storage controller know that's what the orchestrator
+needs still?
+
+#### Storage Controller Crash
+
+When the storage controller starts up reset the node scheduling policy
+of all nodes in states `Draining`, `Filling` or `PauseForRestart` to
+`Active`. The rationale is that when the storage controller restarts,
+we have lost context of what the deployment orchestrator wants. It also
+has the benefit of making things easier to reason about.
+
+#### Pageserver Crash During Drain
+
+The pageserver will attempt to re-attach during restart at which
+point the node scheduling policy will be set back to `Active`, thus
+reenabling the scheduler to use the node.
+
+#### Non-drained Pageserver Crash During Drain
+
+What should happen when a pageserver we are draining to crashes during the
+process. Two reasonable options are: cancel the drain and focus on the failover
+*or* do both, but prioritise failover. Since the number of concurrent reconciles
+produced by drains/fills are limited, we get the later behaviour for free.
+My suggestion is we take this approach, but the cancellation option is trivial
+to implement as well.
+
+#### Pageserver Crash During Fill
+
+The pageserver will attempt to re-attach during restart at which
+point the node scheduling policy will be set back to `Active`, thus
+reenabling the scheduler to use the node.
+
+#### Pageserver Goes unavailable During Drain/Fill
+
+The drain and fill jobs handle this by stopping early. When the pageserver
+is detected as online by storage controller heartbeats, reset its scheduling
+policy to `Active`. If a restart happens instead, see the pageserver crash
+failure mode.
+
+#### Orchestrator Drain Times Out
+
+Orchestrator will still proceed with the restart.
+When the pageserver re-attaches, the scheduling policy is set back to
+`Active`.
+
+#### Orchestrator Fill Times Out
+
+Orchestrator will attempt to cancel the fill operation. If that fails,
+the fill will continue until it quiesces and the node will be left
+in the `Filling` scheduling policy. This hinders the scheduler, but is
+otherwise harmless. A human operator can handle this by setting the scheduling
+policy to `Active`, or we can bake in a fill timeout into the storage controller.
+
+## Optimizations
+
+### Location Warmth
+
+When cutting over to a secondary, the storage controller will wait for it to
+become "warm" (i.e. download enough of the tenants data). This means that some
+reconciliations can take significantly longer than others and hold up precious
+reconciliations units. As an optimization, the drain stage can only cut over
+tenants that are already "warm". Similarly, the fill stage can prioritise the
+"warmest" tenants in the fill.
+
+Given that the number of tenants by the storage controller will be fairly low
+for the foreseable future, the first implementation could simply query the tenants
+for secondary status. This doesn't scale well with increasing tenant counts, so
+eventually we will need new pageserver API endpoints to report the sets of
+"warm" and "cold" nodes.
+
+## Alternatives Considered
+
+### Draining and Filling Purely as Scheduling Constraints
+
+At its core, the storage controller is a big background loop that detects changes
+in the environment and reacts on them. One could express draining and filling
+of nodes purely in terms of constraining the scheduler (as opposed to having
+such background tasks).
+
+While theoretically nice, I think that's harder to implement and more importantly operate and reason about.
+Consider cancellation of a drain/fill operation. We would have to update the scheduler state, create
+an entirely new schedule (intent state) and start work on applying that. It gets trickier if we wish
+to cancel the reconciliation tasks spawned by drain/fill nodes. How would we know which ones belong
+to the conceptual drain/fill? One could add labels to reconciliations, but it gets messy in my opinion.
+
+It would also mean that reconciliations themselves have side effects that persist in the database
+(persist something to the databse when the drain is done), which I'm not conceptually fond of.
+
+## Proof of Concept
+
+This RFC is accompanied by a POC which implements nearly everything mentioned here
+apart from the optimizations and some of the failure handling:
+https://github.com/neondatabase/neon/pull/7682

libs/pageserver_api/src/key.rs

@@ -29,7 +29,7 @@ pub const KEY_SIZE: usize = 18;
 /// See [`Key::to_i128`] for more information on the encoding.
 pub const METADATA_KEY_SIZE: usize = 16;
 
-/// The key prefix start range for the metadata keys. All keys with the first byte >= 0x40 is a metadata key.
+/// The key prefix start range for the metadata keys. All keys with the first byte >= 0x60 is a metadata key.
 pub const METADATA_KEY_BEGIN_PREFIX: u8 = 0x60;
 pub const METADATA_KEY_END_PREFIX: u8 = 0x7F;
 

libs/pageserver_api/src/keyspace.rs

@@ -17,6 +17,16 @@ pub struct KeySpace {
     pub ranges: Vec<Range<Key>>,
 }
 
+impl std::fmt::Display for KeySpace {
+    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
+        write!(f, "[")?;
+        for range in &self.ranges {
+            write!(f, "{}..{},", range.start, range.end)?;
+        }
+        write!(f, "]")
+    }
+}
+
 /// A wrapper type for sparse keyspaces.
 #[derive(Clone, Debug, Default, PartialEq, Eq)]
 pub struct SparseKeySpace(pub KeySpace);

libs/pageserver_api/src/models.rs

@@ -9,6 +9,7 @@ use std::{
     collections::HashMap,
     io::{BufRead, Read},
     num::{NonZeroU64, NonZeroUsize},
+    str::FromStr,
     sync::atomic::AtomicUsize,
     time::{Duration, SystemTime},
 };
@@ -228,6 +229,11 @@ pub struct TimelineCreateRequest {
     pub pg_version: Option<u32>,
 }
 
+#[derive(Serialize, Deserialize, Clone)]
+pub struct LsnLeaseRequest {
+    pub lsn: Lsn,
+}
+
 #[derive(Serialize, Deserialize)]
 pub struct TenantShardSplitRequest {
     pub new_shard_count: u8,
@@ -432,6 +438,51 @@ pub enum CompactionAlgorithm {
     Tiered,
 }
 
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize)]
+pub enum ImageCompressionAlgorithm {
+    /// Disabled for writes, and never decompress during reading.
+    /// Never set this after you've enabled compression once!
+    DisabledNoDecompress,
+    // Disabled for writes, support decompressing during read path
+    Disabled,
+    /// Zstandard compression. Level 0 means and None mean the same (default level). Levels can be negative as well.
+    /// For details, see the [manual](http://facebook.github.io/zstd/zstd_manual.html).
+    Zstd {
+        level: Option<i8>,
+    },
+}
+
+impl ImageCompressionAlgorithm {
+    pub fn allow_decompression(&self) -> bool {
+        !matches!(self, ImageCompressionAlgorithm::DisabledNoDecompress)
+    }
+}
+
+impl FromStr for ImageCompressionAlgorithm {
+    type Err = anyhow::Error;
+    fn from_str(s: &str) -> Result<Self, Self::Err> {
+        let mut components = s.split(['(', ')']);
+        let first = components
+            .next()
+            .ok_or_else(|| anyhow::anyhow!("empty string"))?;
+        match first {
+            "disabled-no-decompress" => Ok(ImageCompressionAlgorithm::DisabledNoDecompress),
+            "disabled" => Ok(ImageCompressionAlgorithm::Disabled),
+            "zstd" => {
+                let level = if let Some(v) = components.next() {
+                    let v: i8 = v.parse()?;
+                    Some(v)
+                } else {
+                    None
+                };
+
+                Ok(ImageCompressionAlgorithm::Zstd { level })
+            }
+            _ => anyhow::bail!("invalid specifier '{first}'"),
+        }
+    }
+}
+
 #[derive(Eq, PartialEq, Debug, Clone, Serialize, Deserialize)]
 pub struct CompactionAlgorithmSettings {
     pub kind: CompactionAlgorithm,
@@ -643,6 +694,16 @@ pub struct TimelineInfo {
     pub current_physical_size: Option<u64>, // is None when timeline is Unloaded
     pub current_logical_size_non_incremental: Option<u64>,
 
+    /// How many bytes of WAL are within this branch's pitr_interval.  If the pitr_interval goes
+    /// beyond the branch's branch point, we only count up to the branch point.
+    pub pitr_history_size: u64,
+
+    /// Whether this branch's branch point is within its ancestor's PITR interval (i.e. any
+    /// ancestor data used by this branch would have been retained anyway).  If this is false, then
+    /// this branch may be imposing a cost on the ancestor by causing it to retain layers that it would
+    /// otherwise be able to GC.
+    pub within_ancestor_pitr: bool,
+
     pub timeline_dir_layer_file_size_sum: Option<u64>,
 
     pub wal_source_connstr: Option<String>,
@@ -1614,4 +1675,29 @@ mod tests {
             AuxFilePolicy::CrossValidation
         );
     }
+
+    #[test]
+    fn test_image_compression_algorithm_parsing() {
+        use ImageCompressionAlgorithm::*;
+        assert_eq!(
+            ImageCompressionAlgorithm::from_str("disabled").unwrap(),
+            Disabled
+        );
+        assert_eq!(
+            ImageCompressionAlgorithm::from_str("disabled-no-decompress").unwrap(),
+            DisabledNoDecompress
+        );
+        assert_eq!(
+            ImageCompressionAlgorithm::from_str("zstd").unwrap(),
+            Zstd { level: None }
+        );
+        assert_eq!(
+            ImageCompressionAlgorithm::from_str("zstd(18)").unwrap(),
+            Zstd { level: Some(18) }
+        );
+        assert_eq!(
+            ImageCompressionAlgorithm::from_str("zstd(-3)").unwrap(),
+            Zstd { level: Some(-3) }
+        );
+    }
 }

libs/remote_storage/src/config.rs

@@ -1,6 +1,5 @@
 use std::{fmt::Debug, num::NonZeroUsize, str::FromStr, time::Duration};
 
-use anyhow::bail;
 use aws_sdk_s3::types::StorageClass;
 use camino::Utf8PathBuf;
 
@@ -176,20 +175,8 @@ fn serialize_storage_class<S: serde::Serializer>(
 impl RemoteStorageConfig {
     pub const DEFAULT_TIMEOUT: Duration = std::time::Duration::from_secs(120);
 
-    pub fn from_toml(toml: &toml_edit::Item) -> anyhow::Result<Option<RemoteStorageConfig>> {
-        let document: toml_edit::Document = match toml {
-            toml_edit::Item::Table(toml) => toml.clone().into(),
-            toml_edit::Item::Value(toml_edit::Value::InlineTable(toml)) => {
-                toml.clone().into_table().into()
-            }
-            _ => bail!("toml not a table or inline table"),
-        };
-
-        if document.is_empty() {
-            return Ok(None);
-        }
-
-        Ok(Some(toml_edit::de::from_document(document)?))
+    pub fn from_toml(toml: &toml_edit::Item) -> anyhow::Result<RemoteStorageConfig> {
+        Ok(utils::toml_edit_ext::deserialize_item(toml)?)
     }
 }
 
@@ -197,7 +184,7 @@ impl RemoteStorageConfig {
 mod tests {
     use super::*;
 
-    fn parse(input: &str) -> anyhow::Result<Option<RemoteStorageConfig>> {
+    fn parse(input: &str) -> anyhow::Result<RemoteStorageConfig> {
         let toml = input.parse::<toml_edit::Document>().unwrap();
         RemoteStorageConfig::from_toml(toml.as_item())
     }
@@ -207,7 +194,7 @@ mod tests {
         let input = "local_path = '.'
 timeout = '5s'";
 
-        let config = parse(input).unwrap().expect("it exists");
+        let config = parse(input).unwrap();
 
         assert_eq!(
             config,
@@ -229,7 +216,7 @@ timeout = '5s'";
     timeout = '7s'
     ";
 
-        let config = parse(toml).unwrap().expect("it exists");
+        let config = parse(toml).unwrap();
 
         assert_eq!(
             config,
@@ -257,7 +244,7 @@ timeout = '5s'";
     timeout = '7s'
     ";
 
-        let config = parse(toml).unwrap().expect("it exists");
+        let config = parse(toml).unwrap();
 
         assert_eq!(
             config,

libs/tenant_size_model/src/calculation.rs

@@ -34,10 +34,10 @@ struct SegmentSize {
 }
 
 struct SizeAlternatives {
-    // cheapest alternative if parent is available.
+    /// cheapest alternative if parent is available.
     incremental: SegmentSize,
 
-    // cheapest alternative if parent node is not available
+    /// cheapest alternative if parent node is not available
     non_incremental: Option<SegmentSize>,
 }
 

libs/tenant_size_model/src/svg.rs

@@ -3,10 +3,17 @@ use std::fmt::Write;
 
 const SVG_WIDTH: f32 = 500.0;
 
+/// Different branch kind for SVG drawing.
+#[derive(PartialEq)]
+pub enum SvgBranchKind {
+    Timeline,
+    Lease,
+}
+
 struct SvgDraw<'a> {
     storage: &'a StorageModel,
     branches: &'a [String],
-    seg_to_branch: &'a [usize],
+    seg_to_branch: &'a [(usize, SvgBranchKind)],
     sizes: &'a [SegmentSizeResult],
 
     // layout
@@ -42,13 +49,18 @@ fn draw_legend(result: &mut String) -> anyhow::Result<()> {
         "<line x1=\"5\" y1=\"70\" x2=\"15\" y2=\"70\" stroke-width=\"1\" stroke=\"gray\" />"
     )?;
     writeln!(result, "<text x=\"20\" y=\"75\">WAL not retained</text>")?;
+    writeln!(
+        result,
+        "<line x1=\"10\" y1=\"85\" x2=\"10\" y2=\"95\" stroke-width=\"3\" stroke=\"blue\" />"
+    )?;
+    writeln!(result, "<text x=\"20\" y=\"95\">LSN lease</text>")?;
     Ok(())
 }
 
 pub fn draw_svg(
     storage: &StorageModel,
     branches: &[String],
-    seg_to_branch: &[usize],
+    seg_to_branch: &[(usize, SvgBranchKind)],
     sizes: &SizeResult,
 ) -> anyhow::Result<String> {
     let mut draw = SvgDraw {
@@ -100,7 +112,7 @@ impl<'a> SvgDraw<'a> {
 
         // Layout the timelines on Y dimension.
         // TODO
-        let mut y = 100.0;
+        let mut y = 120.0;
         let mut branch_y_coordinates = Vec::new();
         for _branch in self.branches {
             branch_y_coordinates.push(y);
@@ -109,7 +121,7 @@ impl<'a> SvgDraw<'a> {
 
         // Calculate coordinates for each point
         let seg_coordinates = std::iter::zip(segments, self.seg_to_branch)
-            .map(|(seg, branch_id)| {
+            .map(|(seg, (branch_id, _))| {
                 let x = (seg.lsn - min_lsn) as f32 / xscale;
                 let y = branch_y_coordinates[*branch_id];
                 (x, y)
@@ -175,6 +187,22 @@ impl<'a> SvgDraw<'a> {
 
         // draw a snapshot point if it's needed
         let (coord_x, coord_y) = self.seg_coordinates[seg_id];
+
+        let (_, kind) = &self.seg_to_branch[seg_id];
+        if kind == &SvgBranchKind::Lease {
+            let (x1, y1) = (coord_x, coord_y - 10.0);
+            let (x2, y2) = (coord_x, coord_y + 10.0);
+
+            let style = "stroke-width=\"3\" stroke=\"blue\"";
+
+            writeln!(
+                result,
+                "<line x1=\"{x1}\" y1=\"{y1}\" x2=\"{x2}\" y2=\"{y2}\" {style}>",
+            )?;
+            writeln!(result, "  <title>leased lsn at {}</title>", seg.lsn)?;
+            writeln!(result, "</line>")?;
+        }
+
         if self.sizes[seg_id].method == SegmentMethod::SnapshotHere {
             writeln!(
                 result,

libs/utils/Cargo.toml

@@ -40,6 +40,7 @@ thiserror.workspace = true
 tokio.workspace = true
 tokio-tar.workspace = true
 tokio-util.workspace = true
+toml_edit.workspace = true
 tracing.workspace = true
 tracing-error.workspace = true
 tracing-subscriber = { workspace = true, features = ["json", "registry"] }

libs/utils/src/lib.rs

@@ -94,6 +94,8 @@ pub mod env;
 
 pub mod poison;
 
+pub mod toml_edit_ext;
+
 /// This is a shortcut to embed git sha into binaries and avoid copying the same build script to all packages
 ///
 /// we have several cases:

libs/utils/src/toml_edit_ext.rs

@@ -0,0 +1,22 @@
+#[derive(Debug, thiserror::Error)]
+pub enum Error {
+    #[error("item is not a document")]
+    ItemIsNotADocument,
+    #[error(transparent)]
+    Serde(toml_edit::de::Error),
+}
+
+pub fn deserialize_item<T>(item: &toml_edit::Item) -> Result<T, Error>
+where
+    T: serde::de::DeserializeOwned,
+{
+    let document: toml_edit::Document = match item {
+        toml_edit::Item::Table(toml) => toml.clone().into(),
+        toml_edit::Item::Value(toml_edit::Value::InlineTable(toml)) => {
+            toml.clone().into_table().into()
+        }
+        _ => return Err(Error::ItemIsNotADocument),
+    };
+
+    toml_edit::de::from_document(document).map_err(Error::Serde)
+}

pageserver/ctl/src/main.rs

@@ -178,7 +178,7 @@ async fn main() -> anyhow::Result<()> {
             let toml_item = toml_document
                 .get("remote_storage")
                 .expect("need remote_storage");
-            let config = RemoteStorageConfig::from_toml(toml_item)?.expect("incomplete config");
+            let config = RemoteStorageConfig::from_toml(toml_item)?;
             let storage = remote_storage::GenericRemoteStorage::from_config(&config);
             let cancel = CancellationToken::new();
             storage

pageserver/src/basebackup.rs

@@ -348,35 +348,36 @@ where
                     self.add_rel(rel, rel).await?;
                 }
             }
-
-            for (path, content) in self
-                .timeline
-                .list_aux_files(self.lsn, self.ctx)
-                .await
-                .map_err(|e| BasebackupError::Server(e.into()))?
-            {
-                if path.starts_with("pg_replslot") {
-                    let offs = pg_constants::REPL_SLOT_ON_DISK_OFFSETOF_RESTART_LSN;
-                    let restart_lsn = Lsn(u64::from_le_bytes(
-                        content[offs..offs + 8].try_into().unwrap(),
-                    ));
-                    info!("Replication slot {} restart LSN={}", path, restart_lsn);
-                    min_restart_lsn = Lsn::min(min_restart_lsn, restart_lsn);
-                } else if path == "pg_logical/replorigin_checkpoint" {
-                    // replorigin_checkoint is written only on compute shutdown, so it contains
-                    // deteriorated values. So we generate our own version of this file for the particular LSN
-                    // based on information about replorigins extracted from transaction commit records.
-                    // In future we will not generate AUX record for "pg_logical/replorigin_checkpoint" at all,
-                    // but now we should handle (skip) it for backward compatibility.
-                    continue;
-                }
-                let header = new_tar_header(&path, content.len() as u64)?;
-                self.ar
-                    .append(&header, &*content)
-                    .await
-                    .context("could not add aux file to basebackup tarball")?;
-            }
         }
+
+        for (path, content) in self
+            .timeline
+            .list_aux_files(self.lsn, self.ctx)
+            .await
+            .map_err(|e| BasebackupError::Server(e.into()))?
+        {
+            if path.starts_with("pg_replslot") {
+                let offs = pg_constants::REPL_SLOT_ON_DISK_OFFSETOF_RESTART_LSN;
+                let restart_lsn = Lsn(u64::from_le_bytes(
+                    content[offs..offs + 8].try_into().unwrap(),
+                ));
+                info!("Replication slot {} restart LSN={}", path, restart_lsn);
+                min_restart_lsn = Lsn::min(min_restart_lsn, restart_lsn);
+            } else if path == "pg_logical/replorigin_checkpoint" {
+                // replorigin_checkoint is written only on compute shutdown, so it contains
+                // deteriorated values. So we generate our own version of this file for the particular LSN
+                // based on information about replorigins extracted from transaction commit records.
+                // In future we will not generate AUX record for "pg_logical/replorigin_checkpoint" at all,
+                // but now we should handle (skip) it for backward compatibility.
+                continue;
+            }
+            let header = new_tar_header(&path, content.len() as u64)?;
+            self.ar
+                .append(&header, &*content)
+                .await
+                .context("could not add aux file to basebackup tarball")?;
+        }
+
         if min_restart_lsn != Lsn::MAX {
             info!(
                 "Min restart LSN for logical replication is {}",

pageserver/src/bin/pageserver.rs

@@ -421,6 +421,10 @@ fn start_pageserver(
         background_jobs_can_start: background_jobs_barrier.clone(),
     };
 
+    info!(config=?conf.l0_flush, "using l0_flush config");
+    let l0_flush_global_state =
+        pageserver::l0_flush::L0FlushGlobalState::new(conf.l0_flush.clone());
+
     // Scan the local 'tenants/' directory and start loading the tenants
     let deletion_queue_client = deletion_queue.new_client();
     let tenant_manager = BACKGROUND_RUNTIME.block_on(mgr::init_tenant_mgr(
@@ -429,6 +433,7 @@ fn start_pageserver(
             broker_client: broker_client.clone(),
             remote_storage: remote_storage.clone(),
             deletion_queue_client,
+            l0_flush_global_state,
         },
         order,
         shutdown_pageserver.clone(),

pageserver/src/config.rs

@@ -5,7 +5,7 @@
 //! See also `settings.md` for better description on every parameter.
 
 use anyhow::{anyhow, bail, ensure, Context, Result};
-use pageserver_api::shard::TenantShardId;
+use pageserver_api::{models::ImageCompressionAlgorithm, shard::TenantShardId};
 use remote_storage::{RemotePath, RemoteStorageConfig};
 use serde;
 use serde::de::IntoDeserializer;
@@ -30,11 +30,11 @@ use utils::{
     logging::LogFormat,
 };
 
-use crate::tenant::timeline::GetVectoredImpl;
 use crate::tenant::vectored_blob_io::MaxVectoredReadBytes;
 use crate::tenant::{config::TenantConfOpt, timeline::GetImpl};
 use crate::tenant::{TENANTS_SEGMENT_NAME, TIMELINES_SEGMENT_NAME};
 use crate::{disk_usage_eviction_task::DiskUsageEvictionTaskConfig, virtual_file::io_engine};
+use crate::{l0_flush::L0FlushConfig, tenant::timeline::GetVectoredImpl};
 use crate::{tenant::config::TenantConf, virtual_file};
 use crate::{TENANT_HEATMAP_BASENAME, TENANT_LOCATION_CONFIG_NAME, TIMELINE_DELETE_MARK_SUFFIX};
 
@@ -50,6 +50,7 @@ pub mod defaults {
         DEFAULT_HTTP_LISTEN_ADDR, DEFAULT_HTTP_LISTEN_PORT, DEFAULT_PG_LISTEN_ADDR,
         DEFAULT_PG_LISTEN_PORT,
     };
+    use pageserver_api::models::ImageCompressionAlgorithm;
     pub use storage_broker::DEFAULT_ENDPOINT as BROKER_DEFAULT_ENDPOINT;
 
     pub const DEFAULT_WAIT_LSN_TIMEOUT: &str = "60 s";
@@ -90,6 +91,9 @@ pub mod defaults {
 
     pub const DEFAULT_MAX_VECTORED_READ_BYTES: usize = 128 * 1024; // 128 KiB
 
+    pub const DEFAULT_IMAGE_COMPRESSION: ImageCompressionAlgorithm =
+        ImageCompressionAlgorithm::DisabledNoDecompress;
+
     pub const DEFAULT_VALIDATE_VECTORED_GET: bool = true;
 
     pub const DEFAULT_EPHEMERAL_BYTES_PER_MEMORY_KB: usize = 0;
@@ -159,7 +163,7 @@ pub mod defaults {
 
 #ephemeral_bytes_per_memory_kb = {DEFAULT_EPHEMERAL_BYTES_PER_MEMORY_KB}
 
-[remote_storage]
+#[remote_storage]
 
 "#
     );
@@ -285,12 +289,16 @@ pub struct PageServerConf {
 
     pub validate_vectored_get: bool,
 
+    pub image_compression: ImageCompressionAlgorithm,
+
     /// How many bytes of ephemeral layer content will we allow per kilobyte of RAM.  When this
     /// is exceeded, we start proactively closing ephemeral layers to limit the total amount
     /// of ephemeral data.
     ///
     /// Setting this to zero disables limits on total ephemeral layer size.
     pub ephemeral_bytes_per_memory_kb: usize,
+
+    pub l0_flush: L0FlushConfig,
 }
 
 /// We do not want to store this in a PageServerConf because the latter may be logged
@@ -395,7 +403,11 @@ struct PageServerConfigBuilder {
 
     validate_vectored_get: BuilderValue<bool>,
 
+    image_compression: BuilderValue<ImageCompressionAlgorithm>,
+
     ephemeral_bytes_per_memory_kb: BuilderValue<usize>,
+
+    l0_flush: BuilderValue<L0FlushConfig>,
 }
 
 impl PageServerConfigBuilder {
@@ -482,8 +494,10 @@ impl PageServerConfigBuilder {
             max_vectored_read_bytes: Set(MaxVectoredReadBytes(
                 NonZeroUsize::new(DEFAULT_MAX_VECTORED_READ_BYTES).unwrap(),
             )),
+            image_compression: Set(DEFAULT_IMAGE_COMPRESSION),
             validate_vectored_get: Set(DEFAULT_VALIDATE_VECTORED_GET),
             ephemeral_bytes_per_memory_kb: Set(DEFAULT_EPHEMERAL_BYTES_PER_MEMORY_KB),
+            l0_flush: Set(L0FlushConfig::default()),
         }
     }
 }
@@ -667,10 +681,18 @@ impl PageServerConfigBuilder {
         self.validate_vectored_get = BuilderValue::Set(value);
     }
 
+    pub fn get_image_compression(&mut self, value: ImageCompressionAlgorithm) {
+        self.image_compression = BuilderValue::Set(value);
+    }
+
     pub fn get_ephemeral_bytes_per_memory_kb(&mut self, value: usize) {
         self.ephemeral_bytes_per_memory_kb = BuilderValue::Set(value);
     }
 
+    pub fn l0_flush(&mut self, value: L0FlushConfig) {
+        self.l0_flush = BuilderValue::Set(value);
+    }
+
     pub fn build(self) -> anyhow::Result<PageServerConf> {
         let default = Self::default_values();
 
@@ -727,7 +749,9 @@ impl PageServerConfigBuilder {
                 get_impl,
                 max_vectored_read_bytes,
                 validate_vectored_get,
+                image_compression,
                 ephemeral_bytes_per_memory_kb,
+                l0_flush,
             }
             CUSTOM LOGIC
             {
@@ -918,7 +942,7 @@ impl PageServerConf {
                 "http_auth_type" => builder.http_auth_type(parse_toml_from_str(key, item)?),
                 "pg_auth_type" => builder.pg_auth_type(parse_toml_from_str(key, item)?),
                 "remote_storage" => {
-                    builder.remote_storage_config(RemoteStorageConfig::from_toml(item)?)
+                    builder.remote_storage_config(Some(RemoteStorageConfig::from_toml(item).context("remote_storage")?))
                 }
                 "tenant_config" => {
                     t_conf = TenantConfOpt::try_from(item.to_owned()).context(format!("failed to parse: '{key}'"))?;
@@ -946,7 +970,7 @@ impl PageServerConf {
                     builder.metric_collection_endpoint(Some(endpoint));
                 },
                 "metric_collection_bucket" => {
-                    builder.metric_collection_bucket(RemoteStorageConfig::from_toml(item)?)
+                    builder.metric_collection_bucket(Some(RemoteStorageConfig::from_toml(item)?))
                 }
                 "synthetic_size_calculation_interval" =>
                     builder.synthetic_size_calculation_interval(parse_toml_duration(key, item)?),
@@ -1004,9 +1028,15 @@ impl PageServerConf {
                 "validate_vectored_get" => {
                     builder.get_validate_vectored_get(parse_toml_bool("validate_vectored_get", item)?)
                 }
+                "image_compression" => {
+                    builder.get_image_compression(parse_toml_from_str("image_compression", item)?)
+                }
                 "ephemeral_bytes_per_memory_kb" => {
                     builder.get_ephemeral_bytes_per_memory_kb(parse_toml_u64("ephemeral_bytes_per_memory_kb", item)? as usize)
                 }
+                "l0_flush" => {
+                    builder.l0_flush(utils::toml_edit_ext::deserialize_item(item).context("l0_flush")?)
+                }
                 _ => bail!("unrecognized pageserver option '{key}'"),
             }
         }
@@ -1088,8 +1118,10 @@ impl PageServerConf {
                 NonZeroUsize::new(defaults::DEFAULT_MAX_VECTORED_READ_BYTES)
                     .expect("Invalid default constant"),
             ),
+            image_compression: defaults::DEFAULT_IMAGE_COMPRESSION,
             validate_vectored_get: defaults::DEFAULT_VALIDATE_VECTORED_GET,
             ephemeral_bytes_per_memory_kb: defaults::DEFAULT_EPHEMERAL_BYTES_PER_MEMORY_KB,
+            l0_flush: L0FlushConfig::default(),
         }
     }
 }
@@ -1328,7 +1360,9 @@ background_task_maximum_delay = '334 s'
                         .expect("Invalid default constant")
                 ),
                 validate_vectored_get: defaults::DEFAULT_VALIDATE_VECTORED_GET,
+                image_compression: defaults::DEFAULT_IMAGE_COMPRESSION,
                 ephemeral_bytes_per_memory_kb: defaults::DEFAULT_EPHEMERAL_BYTES_PER_MEMORY_KB,
+                l0_flush: L0FlushConfig::default(),
             },
             "Correct defaults should be used when no config values are provided"
         );
@@ -1401,7 +1435,9 @@ background_task_maximum_delay = '334 s'
                         .expect("Invalid default constant")
                 ),
                 validate_vectored_get: defaults::DEFAULT_VALIDATE_VECTORED_GET,
+                image_compression: defaults::DEFAULT_IMAGE_COMPRESSION,
                 ephemeral_bytes_per_memory_kb: defaults::DEFAULT_EPHEMERAL_BYTES_PER_MEMORY_KB,
+                l0_flush: L0FlushConfig::default(),
             },
             "Should be able to parse all basic config values correctly"
         );
@@ -1681,6 +1717,19 @@ threshold = "20m"
         }
     }
 
+    #[test]
+    fn empty_remote_storage_is_error() {
+        let tempdir = tempdir().unwrap();
+        let (workdir, _) = prepare_fs(&tempdir).unwrap();
+        let input = r#"
+remote_storage = {}
+        "#;
+        let doc = toml_edit::Document::from_str(input).unwrap();
+        let err = PageServerConf::parse_and_validate(&doc, &workdir)
+            .expect_err("empty remote_storage field should fail, don't specify it if you want no remote_storage");
+        assert!(format!("{err}").contains("remote_storage"), "{err}");
+    }
+
     fn prepare_fs(tempdir: &Utf8TempDir) -> anyhow::Result<(Utf8PathBuf, Utf8PathBuf)> {
         let tempdir_path = tempdir.path();
 

pageserver/src/deletion_queue/validator.rs

@@ -190,7 +190,7 @@ where
                 }
             } else {
                 // If we failed validation, then do not apply any of the projected updates
-                warn!("Dropped remote consistent LSN updates for tenant {tenant_id} in stale generation {:?}", tenant_lsn_state.generation);
+                info!("Dropped remote consistent LSN updates for tenant {tenant_id} in stale generation {:?}", tenant_lsn_state.generation);
                 metrics::DELETION_QUEUE.dropped_lsn_updates.inc();
             }
         }
@@ -225,7 +225,7 @@ where
                     && (tenant.generation == *validated_generation);
 
                 if !this_list_valid {
-                    warn!("Dropping stale deletions for tenant {tenant_id} in generation {:?}, objects may be leaked", tenant.generation);
+                    info!("Dropping stale deletions for tenant {tenant_id} in generation {:?}, objects may be leaked", tenant.generation);
                     metrics::DELETION_QUEUE.keys_dropped.inc_by(tenant.len() as u64);
                     mutated = true;
                 } else {

pageserver/src/http/openapi_spec.yml

@@ -265,15 +265,19 @@ paths:
           type: string
           format: hex
     post:
-      description: Obtain lease for the given LSN
-      parameters:
-        - name: lsn
-          in: query
-          required: true
-          schema:
-            type: string
-            format: hex
-          description: A LSN to obtain the lease for
+      description: Obtains a lease for the given LSN.
+      requestBody:
+        content:
+          application/json:
+            schema:
+              type: object
+              required:
+               - lsn
+              properties:
+                lsn:
+                  description: A LSN to obtain the lease for.
+                  type: string
+                  format: hex
       responses:
         "200":
           description: OK

pageserver/src/http/routes.rs

@@ -22,6 +22,7 @@ use pageserver_api::models::ListAuxFilesRequest;
 use pageserver_api::models::LocationConfig;
 use pageserver_api::models::LocationConfigListResponse;
 use pageserver_api::models::LsnLease;
+use pageserver_api::models::LsnLeaseRequest;
 use pageserver_api::models::ShardParameters;
 use pageserver_api::models::TenantDetails;
 use pageserver_api::models::TenantLocationConfigResponse;
@@ -42,7 +43,7 @@ use pageserver_api::shard::TenantShardId;
 use remote_storage::DownloadError;
 use remote_storage::GenericRemoteStorage;
 use remote_storage::TimeTravelError;
-use tenant_size_model::{SizeResult, StorageModel};
+use tenant_size_model::{svg::SvgBranchKind, SizeResult, StorageModel};
 use tokio_util::sync::CancellationToken;
 use tracing::*;
 use utils::auth::JwtAuth;
@@ -227,7 +228,7 @@ impl From<UpsertLocationError> for ApiError {
             BadRequest(e) => ApiError::BadRequest(e),
             Unavailable(_) => ApiError::ShuttingDown,
             e @ InProgress => ApiError::Conflict(format!("{e}")),
-            Flush(e) | Other(e) => ApiError::InternalServerError(e),
+            Flush(e) | InternalError(e) => ApiError::InternalServerError(e),
         }
     }
 }
@@ -406,6 +407,8 @@ async fn build_timeline_info_common(
 
     let walreceiver_status = timeline.walreceiver_status();
 
+    let (pitr_history_size, within_ancestor_pitr) = timeline.get_pitr_history_stats();
+
     let info = TimelineInfo {
         tenant_id: timeline.tenant_shard_id,
         timeline_id: timeline.timeline_id,
@@ -426,6 +429,8 @@ async fn build_timeline_info_common(
         directory_entries_counts: timeline.get_directory_metrics().to_vec(),
         current_physical_size,
         current_logical_size_non_incremental: None,
+        pitr_history_size,
+        within_ancestor_pitr,
         timeline_dir_layer_file_size_sum: None,
         wal_source_connstr,
         last_received_msg_lsn,
@@ -1191,10 +1196,15 @@ fn synthetic_size_html_response(
         timeline_map.insert(ti.timeline_id, index);
         timeline_ids.push(ti.timeline_id.to_string());
     }
-    let seg_to_branch: Vec<usize> = inputs
+    let seg_to_branch: Vec<(usize, SvgBranchKind)> = inputs
         .segments
         .iter()
-        .map(|seg| *timeline_map.get(&seg.timeline_id).unwrap())
+        .map(|seg| {
+            (
+                *timeline_map.get(&seg.timeline_id).unwrap(),
+                seg.kind.into(),
+            )
+        })
         .collect();
 
     let svg =
@@ -1296,7 +1306,7 @@ async fn update_tenant_config_handler(
 
     crate::tenant::Tenant::persist_tenant_config(state.conf, &tenant_shard_id, &location_conf)
         .await
-        .map_err(ApiError::InternalServerError)?;
+        .map_err(|e| ApiError::InternalServerError(anyhow::anyhow!(e)))?;
     tenant.set_new_tenant_config(new_tenant_conf);
 
     json_response(StatusCode::OK, ())
@@ -1527,15 +1537,13 @@ async fn handle_tenant_break(
 
 // Obtains an lsn lease on the given timeline.
 async fn lsn_lease_handler(
-    request: Request<Body>,
+    mut request: Request<Body>,
     _cancel: CancellationToken,
 ) -> Result<Response<Body>, ApiError> {
     let tenant_shard_id: TenantShardId = parse_request_param(&request, "tenant_shard_id")?;
     let timeline_id: TimelineId = parse_request_param(&request, "timeline_id")?;
     check_permission(&request, Some(tenant_shard_id.tenant_id))?;
-
-    let lsn: Lsn = parse_query_param(&request, "lsn")?
-        .ok_or_else(|| ApiError::BadRequest(anyhow!("missing 'lsn' query parameter")))?;
+    let lsn = json_request::<LsnLeaseRequest>(&mut request).await?.lsn;
 
     let ctx = RequestContext::new(TaskKind::MgmtRequest, DownloadBehavior::Download);
 

pageserver/src/l0_flush.rs

@@ -0,0 +1,46 @@
+use std::{num::NonZeroUsize, sync::Arc};
+
+use crate::tenant::ephemeral_file;
+
+#[derive(Default, Debug, PartialEq, Eq, Clone, serde::Deserialize)]
+#[serde(tag = "mode", rename_all = "kebab-case", deny_unknown_fields)]
+pub enum L0FlushConfig {
+    #[default]
+    PageCached,
+    #[serde(rename_all = "snake_case")]
+    Direct { max_concurrency: NonZeroUsize },
+}
+
+#[derive(Clone)]
+pub struct L0FlushGlobalState(Arc<Inner>);
+
+pub(crate) enum Inner {
+    PageCached,
+    Direct { semaphore: tokio::sync::Semaphore },
+}
+
+impl L0FlushGlobalState {
+    pub fn new(config: L0FlushConfig) -> Self {
+        match config {
+            L0FlushConfig::PageCached => Self(Arc::new(Inner::PageCached)),
+            L0FlushConfig::Direct { max_concurrency } => {
+                let semaphore = tokio::sync::Semaphore::new(max_concurrency.get());
+                Self(Arc::new(Inner::Direct { semaphore }))
+            }
+        }
+    }
+
+    pub(crate) fn inner(&self) -> &Arc<Inner> {
+        &self.0
+    }
+}
+
+impl L0FlushConfig {
+    pub(crate) fn prewarm_on_write(&self) -> ephemeral_file::PrewarmPageCacheOnWrite {
+        use L0FlushConfig::*;
+        match self {
+            PageCached => ephemeral_file::PrewarmPageCacheOnWrite::Yes,
+            Direct { .. } => ephemeral_file::PrewarmPageCacheOnWrite::No,
+        }
+    }
+}

pageserver/src/lib.rs

@@ -11,6 +11,7 @@ pub mod deletion_queue;
 pub mod disk_usage_eviction_task;
 pub mod http;
 pub mod import_datadir;
+pub mod l0_flush;
 pub use pageserver_api::keyspace;
 pub mod aux_file;
 pub mod metrics;

pageserver/src/metrics.rs

@@ -8,7 +8,7 @@ use metrics::{
 };
 use once_cell::sync::Lazy;
 use pageserver_api::shard::TenantShardId;
-use strum::{EnumCount, IntoEnumIterator, VariantNames};
+use strum::{EnumCount, VariantNames};
 use strum_macros::{EnumVariantNames, IntoStaticStr};
 use tracing::warn;
 use utils::id::TimelineId;
@@ -464,6 +464,24 @@ static LAST_RECORD_LSN: Lazy<IntGaugeVec> = Lazy::new(|| {
     .expect("failed to define a metric")
 });
 
+static PITR_HISTORY_SIZE: Lazy<UIntGaugeVec> = Lazy::new(|| {
+    register_uint_gauge_vec!(
+        "pageserver_pitr_history_size",
+        "Data written since PITR cutoff on this timeline",
+        &["tenant_id", "shard_id", "timeline_id"]
+    )
+    .expect("failed to define a metric")
+});
+
+static TIMELINE_ARCHIVE_SIZE: Lazy<UIntGaugeVec> = Lazy::new(|| {
+    register_uint_gauge_vec!(
+        "pageserver_archive_size",
+        "Timeline's logical size if it is considered eligible for archival (outside PITR window), else zero",
+        &["tenant_id", "shard_id", "timeline_id"]
+    )
+    .expect("failed to define a metric")
+});
+
 static STANDBY_HORIZON: Lazy<IntGaugeVec> = Lazy::new(|| {
     register_int_gauge_vec!(
         "pageserver_standby_horizon",
@@ -476,7 +494,7 @@ static STANDBY_HORIZON: Lazy<IntGaugeVec> = Lazy::new(|| {
 static RESIDENT_PHYSICAL_SIZE: Lazy<UIntGaugeVec> = Lazy::new(|| {
     register_uint_gauge_vec!(
         "pageserver_resident_physical_size",
-        "The size of the layer files present in the pageserver's filesystem.",
+        "The size of the layer files present in the pageserver's filesystem, for attached locations.",
         &["tenant_id", "shard_id", "timeline_id"]
     )
     .expect("failed to define a metric")
@@ -1076,21 +1094,12 @@ pub(crate) mod virtual_file_io_engine {
     });
 }
 
-#[derive(Debug)]
-struct GlobalAndPerTimelineHistogram {
-    global: Histogram,
-    per_tenant_timeline: Histogram,
-}
-
-impl GlobalAndPerTimelineHistogram {
-    fn observe(&self, value: f64) {
-        self.global.observe(value);
-        self.per_tenant_timeline.observe(value);
-    }
-}
-
 struct GlobalAndPerTimelineHistogramTimer<'a, 'c> {
-    h: &'a GlobalAndPerTimelineHistogram,
+    global_metric: &'a Histogram,
+
+    // Optional because not all op types are tracked per-timeline
+    timeline_metric: Option<&'a Histogram>,
+
     ctx: &'c RequestContext,
     start: std::time::Instant,
     op: SmgrQueryType,
@@ -1121,7 +1130,10 @@ impl<'a, 'c> Drop for GlobalAndPerTimelineHistogramTimer<'a, 'c> {
                 elapsed
             }
         };
-        self.h.observe(ex_throttled.as_secs_f64());
+        self.global_metric.observe(ex_throttled.as_secs_f64());
+        if let Some(timeline_metric) = self.timeline_metric {
+            timeline_metric.observe(ex_throttled.as_secs_f64());
+        }
     }
 }
 
@@ -1146,7 +1158,8 @@ pub enum SmgrQueryType {
 
 #[derive(Debug)]
 pub(crate) struct SmgrQueryTimePerTimeline {
-    metrics: [GlobalAndPerTimelineHistogram; SmgrQueryType::COUNT],
+    global_metrics: [Histogram; SmgrQueryType::COUNT],
+    per_timeline_getpage: Histogram,
 }
 
 static SMGR_QUERY_TIME_PER_TENANT_TIMELINE: Lazy<HistogramVec> = Lazy::new(|| {
@@ -1224,27 +1237,32 @@ impl SmgrQueryTimePerTimeline {
         let tenant_id = tenant_shard_id.tenant_id.to_string();
         let shard_slug = format!("{}", tenant_shard_id.shard_slug());
         let timeline_id = timeline_id.to_string();
-        let metrics = std::array::from_fn(|i| {
+        let global_metrics = std::array::from_fn(|i| {
             let op = SmgrQueryType::from_repr(i).unwrap();
-            let global = SMGR_QUERY_TIME_GLOBAL
+            SMGR_QUERY_TIME_GLOBAL
                 .get_metric_with_label_values(&[op.into()])
-                .unwrap();
-            let per_tenant_timeline = SMGR_QUERY_TIME_PER_TENANT_TIMELINE
-                .get_metric_with_label_values(&[op.into(), &tenant_id, &shard_slug, &timeline_id])
-                .unwrap();
-            GlobalAndPerTimelineHistogram {
-                global,
-                per_tenant_timeline,
-            }
+                .unwrap()
         });
-        Self { metrics }
+
+        let per_timeline_getpage = SMGR_QUERY_TIME_PER_TENANT_TIMELINE
+            .get_metric_with_label_values(&[
+                SmgrQueryType::GetPageAtLsn.into(),
+                &tenant_id,
+                &shard_slug,
+                &timeline_id,
+            ])
+            .unwrap();
+        Self {
+            global_metrics,
+            per_timeline_getpage,
+        }
     }
     pub(crate) fn start_timer<'c: 'a, 'a>(
         &'a self,
         op: SmgrQueryType,
         ctx: &'c RequestContext,
-    ) -> impl Drop + '_ {
-        let metric = &self.metrics[op as usize];
+    ) -> Option<impl Drop + '_> {
+        let global_metric = &self.global_metrics[op as usize];
         let start = Instant::now();
         match ctx.micros_spent_throttled.open() {
             Ok(()) => (),
@@ -1263,12 +1281,20 @@ impl SmgrQueryTimePerTimeline {
                 });
             }
         }
-        GlobalAndPerTimelineHistogramTimer {
-            h: metric,
+
+        let timeline_metric = if matches!(op, SmgrQueryType::GetPageAtLsn) {
+            Some(&self.per_timeline_getpage)
+        } else {
+            None
+        };
+
+        Some(GlobalAndPerTimelineHistogramTimer {
+            global_metric,
+            timeline_metric,
             ctx,
             start,
             op,
-        }
+        })
     }
 }
 
@@ -1315,17 +1341,9 @@ mod smgr_query_time_tests {
             let get_counts = || {
                 let global: u64 = ops
                     .iter()
-                    .map(|op| metrics.metrics[*op as usize].global.get_sample_count())
+                    .map(|op| metrics.global_metrics[*op as usize].get_sample_count())
                     .sum();
-                let per_tenant_timeline: u64 = ops
-                    .iter()
-                    .map(|op| {
-                        metrics.metrics[*op as usize]
-                            .per_tenant_timeline
-                            .get_sample_count()
-                    })
-                    .sum();
-                (global, per_tenant_timeline)
+                (global, metrics.per_timeline_getpage.get_sample_count())
             };
 
             let (pre_global, pre_per_tenant_timeline) = get_counts();
@@ -1336,7 +1354,12 @@ mod smgr_query_time_tests {
             drop(timer);
 
             let (post_global, post_per_tenant_timeline) = get_counts();
-            assert_eq!(post_per_tenant_timeline, 1);
+            if matches!(op, super::SmgrQueryType::GetPageAtLsn) {
+                // getpage ops are tracked per-timeline, others aren't
+                assert_eq!(post_per_tenant_timeline, 1);
+            } else {
+                assert_eq!(post_per_tenant_timeline, 0);
+            }
             assert!(post_global > pre_global);
         }
     }
@@ -1433,10 +1456,12 @@ impl<'a, 'c> BasebackupQueryTimeOngoingRecording<'a, 'c> {
     }
 }
 
-pub(crate) static LIVE_CONNECTIONS_COUNT: Lazy<IntGaugeVec> = Lazy::new(|| {
-    register_int_gauge_vec!(
-        "pageserver_live_connections",
-        "Number of live network connections",
+pub(crate) static LIVE_CONNECTIONS: Lazy<IntCounterPairVec> = Lazy::new(|| {
+    register_int_counter_pair_vec!(
+        "pageserver_live_connections_started",
+        "Number of network connections that we started handling",
+        "pageserver_live_connections_finished",
+        "Number of network connections that we finished handling",
         &["pageserver_connection_kind"]
     )
     .expect("failed to define a metric")
@@ -1447,7 +1472,6 @@ pub(crate) enum ComputeCommandKind {
     PageStreamV2,
     PageStream,
     Basebackup,
-    GetLastRecordRlsn,
     Fullbackup,
     ImportBasebackup,
     ImportWal,
@@ -1691,6 +1715,15 @@ pub(crate) static SECONDARY_MODE: Lazy<SecondaryModeMetrics> = Lazy::new(|| {
 }
 });
 
+pub(crate) static SECONDARY_RESIDENT_PHYSICAL_SIZE: Lazy<UIntGaugeVec> = Lazy::new(|| {
+    register_uint_gauge_vec!(
+        "pageserver_secondary_resident_physical_size",
+        "The size of the layer files present in the pageserver's filesystem, for secondary locations.",
+        &["tenant_id", "shard_id"]
+    )
+    .expect("failed to define a metric")
+});
+
 #[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
 pub enum RemoteOpKind {
     Upload,
@@ -2093,6 +2126,8 @@ pub(crate) struct TimelineMetrics {
     pub garbage_collect_histo: StorageTimeMetrics,
     pub find_gc_cutoffs_histo: StorageTimeMetrics,
     pub last_record_gauge: IntGauge,
+    pub pitr_history_size: UIntGauge,
+    pub archival_size: UIntGauge,
     pub standby_horizon_gauge: IntGauge,
     pub resident_physical_size_gauge: UIntGauge,
     /// copy of LayeredTimeline.current_logical_size
@@ -2166,6 +2201,15 @@ impl TimelineMetrics {
         let last_record_gauge = LAST_RECORD_LSN
             .get_metric_with_label_values(&[&tenant_id, &shard_id, &timeline_id])
             .unwrap();
+
+        let pitr_history_size = PITR_HISTORY_SIZE
+            .get_metric_with_label_values(&[&tenant_id, &shard_id, &timeline_id])
+            .unwrap();
+
+        let archival_size = TIMELINE_ARCHIVE_SIZE
+            .get_metric_with_label_values(&[&tenant_id, &shard_id, &timeline_id])
+            .unwrap();
+
         let standby_horizon_gauge = STANDBY_HORIZON
             .get_metric_with_label_values(&[&tenant_id, &shard_id, &timeline_id])
             .unwrap();
@@ -2218,6 +2262,8 @@ impl TimelineMetrics {
             find_gc_cutoffs_histo,
             load_layer_map_histo,
             last_record_gauge,
+            pitr_history_size,
+            archival_size,
             standby_horizon_gauge,
             resident_physical_size_gauge,
             current_logical_size_gauge,
@@ -2275,6 +2321,10 @@ impl TimelineMetrics {
         if let Some(metric) = Lazy::get(&DIRECTORY_ENTRIES_COUNT) {
             let _ = metric.remove_label_values(&[tenant_id, shard_id, timeline_id]);
         }
+
+        let _ = TIMELINE_ARCHIVE_SIZE.remove_label_values(&[tenant_id, shard_id, timeline_id]);
+        let _ = PITR_HISTORY_SIZE.remove_label_values(&[tenant_id, shard_id, timeline_id]);
+
         let _ = EVICTIONS.remove_label_values(&[tenant_id, shard_id, timeline_id]);
         let _ = AUX_FILE_SIZE.remove_label_values(&[tenant_id, shard_id, timeline_id]);
         let _ = VALID_LSN_LEASE_COUNT.remove_label_values(&[tenant_id, shard_id, timeline_id]);
@@ -2308,14 +2358,12 @@ impl TimelineMetrics {
             let _ = STORAGE_IO_SIZE.remove_label_values(&[op, tenant_id, shard_id, timeline_id]);
         }
 
-        for op in SmgrQueryType::iter() {
-            let _ = SMGR_QUERY_TIME_PER_TENANT_TIMELINE.remove_label_values(&[
-                op.into(),
-                tenant_id,
-                shard_id,
-                timeline_id,
-            ]);
-        }
+        let _ = SMGR_QUERY_TIME_PER_TENANT_TIMELINE.remove_label_values(&[
+            SmgrQueryType::GetPageAtLsn.into(),
+            tenant_id,
+            shard_id,
+            timeline_id,
+        ]);
     }
 }
 

pageserver/src/page_service.rs

@@ -55,7 +55,7 @@ use crate::basebackup::BasebackupError;
 use crate::context::{DownloadBehavior, RequestContext};
 use crate::import_datadir::import_wal_from_tar;
 use crate::metrics;
-use crate::metrics::{ComputeCommandKind, COMPUTE_COMMANDS_COUNTERS, LIVE_CONNECTIONS_COUNT};
+use crate::metrics::{ComputeCommandKind, COMPUTE_COMMANDS_COUNTERS, LIVE_CONNECTIONS};
 use crate::pgdatadir_mapping::Version;
 use crate::span::debug_assert_current_span_has_tenant_and_timeline_id;
 use crate::span::debug_assert_current_span_has_tenant_and_timeline_id_no_shard_id;
@@ -215,14 +215,9 @@ async fn page_service_conn_main(
     auth_type: AuthType,
     connection_ctx: RequestContext,
 ) -> anyhow::Result<()> {
-    // Immediately increment the gauge, then create a job to decrement it on task exit.
-    // One of the pros of `defer!` is that this will *most probably*
-    // get called, even in presence of panics.
-    let gauge = LIVE_CONNECTIONS_COUNT.with_label_values(&["page_service"]);
-    gauge.inc();
-    scopeguard::defer! {
-        gauge.dec();
-    }
+    let _guard = LIVE_CONNECTIONS
+        .with_label_values(&["page_service"])
+        .guard();
 
     socket
         .set_nodelay(true)
@@ -1656,53 +1651,6 @@ where
             metric_recording.observe(&res);
             res?;
         }
-        // return pair of prev_lsn and last_lsn
-        else if let Some(params) = parts.strip_prefix(&["get_last_record_rlsn"]) {
-            if params.len() != 2 {
-                return Err(QueryError::Other(anyhow::anyhow!(
-                    "invalid param number for get_last_record_rlsn command"
-                )));
-            }
-
-            let tenant_id = TenantId::from_str(params[0])
-                .with_context(|| format!("Failed to parse tenant id from {}", params[0]))?;
-            let timeline_id = TimelineId::from_str(params[1])
-                .with_context(|| format!("Failed to parse timeline id from {}", params[1]))?;
-
-            tracing::Span::current()
-                .record("tenant_id", field::display(tenant_id))
-                .record("timeline_id", field::display(timeline_id));
-
-            self.check_permission(Some(tenant_id))?;
-
-            COMPUTE_COMMANDS_COUNTERS
-                .for_command(ComputeCommandKind::GetLastRecordRlsn)
-                .inc();
-
-            async {
-                let timeline = self
-                    .get_active_tenant_timeline(tenant_id, timeline_id, ShardSelector::Zero)
-                    .await?;
-
-                let end_of_timeline = timeline.get_last_record_rlsn();
-
-                pgb.write_message_noflush(&BeMessage::RowDescription(&[
-                    RowDescriptor::text_col(b"prev_lsn"),
-                    RowDescriptor::text_col(b"last_lsn"),
-                ]))?
-                .write_message_noflush(&BeMessage::DataRow(&[
-                    Some(end_of_timeline.prev.to_string().as_bytes()),
-                    Some(end_of_timeline.last.to_string().as_bytes()),
-                ]))?
-                .write_message_noflush(&BeMessage::CommandComplete(b"SELECT 1"))?;
-                anyhow::Ok(())
-            }
-            .instrument(info_span!(
-                "handle_get_last_record_lsn",
-                shard_id = tracing::field::Empty
-            ))
-            .await?;
-        }
         // same as basebackup, but result includes relational data as well
         else if let Some(params) = parts.strip_prefix(&["fullbackup"]) {
             if params.len() < 2 {

pageserver/src/tenant.rs

@@ -73,6 +73,7 @@ use crate::deletion_queue::DeletionQueueClient;
 use crate::deletion_queue::DeletionQueueError;
 use crate::import_datadir;
 use crate::is_uninit_mark;
+use crate::l0_flush::L0FlushGlobalState;
 use crate::metrics::TENANT;
 use crate::metrics::{
     remove_tenant_metrics, BROKEN_TENANTS_SET, TENANT_STATE_METRIC, TENANT_SYNTHETIC_SIZE_METRIC,
@@ -166,6 +167,7 @@ pub struct TenantSharedResources {
     pub broker_client: storage_broker::BrokerClientChannel,
     pub remote_storage: GenericRemoteStorage,
     pub deletion_queue_client: DeletionQueueClient,
+    pub l0_flush_global_state: L0FlushGlobalState,
 }
 
 /// A [`Tenant`] is really an _attached_ tenant.  The configuration
@@ -294,6 +296,8 @@ pub struct Tenant {
 
     /// An ongoing timeline detach must be checked during attempts to GC or compact a timeline.
     ongoing_timeline_detach: std::sync::Mutex<Option<(TimelineId, utils::completion::Barrier)>>,
+
+    l0_flush_global_state: L0FlushGlobalState,
 }
 
 impl std::fmt::Debug for Tenant {
@@ -529,6 +533,15 @@ impl From<PageReconstructError> for GcError {
     }
 }
 
+#[derive(thiserror::Error, Debug)]
+pub(crate) enum LoadConfigError {
+    #[error("TOML deserialization error: '{0}'")]
+    DeserializeToml(#[from] toml_edit::de::Error),
+
+    #[error("Config not found at {0}")]
+    NotFound(Utf8PathBuf),
+}
+
 impl Tenant {
     /// Yet another helper for timeline initialization.
     ///
@@ -667,6 +680,7 @@ impl Tenant {
             broker_client,
             remote_storage,
             deletion_queue_client,
+            l0_flush_global_state,
         } = resources;
 
         let attach_mode = attached_conf.location.attach_mode;
@@ -681,6 +695,7 @@ impl Tenant {
             tenant_shard_id,
             remote_storage.clone(),
             deletion_queue_client,
+            l0_flush_global_state,
         ));
 
         // The attach task will carry a GateGuard, so that shutdown() reliably waits for it to drop out if
@@ -980,6 +995,7 @@ impl Tenant {
                 TimelineResources {
                     remote_client,
                     timeline_get_throttle: self.timeline_get_throttle.clone(),
+                    l0_flush_global_state: self.l0_flush_global_state.clone(),
                 },
                 ctx,
             )
@@ -1349,7 +1365,7 @@ impl Tenant {
         initdb_lsn: Lsn,
         pg_version: u32,
         ctx: &RequestContext,
-        delta_layer_desc: Vec<Vec<(pageserver_api::key::Key, Lsn, crate::repository::Value)>>,
+        delta_layer_desc: Vec<timeline::DeltaLayerTestDesc>,
         image_layer_desc: Vec<(Lsn, Vec<(pageserver_api::key::Key, bytes::Bytes)>)>,
         end_lsn: Lsn,
     ) -> anyhow::Result<Arc<Timeline>> {
@@ -1800,9 +1816,15 @@ impl Tenant {
         // If we're still attaching, fire the cancellation token early to drop out: this
         // will prevent us flushing, but ensures timely shutdown if some I/O during attach
         // is very slow.
-        if matches!(self.current_state(), TenantState::Attaching) {
+        let shutdown_mode = if matches!(self.current_state(), TenantState::Attaching) {
             self.cancel.cancel();
-        }
+
+            // Having fired our cancellation token, do not try and flush timelines: their cancellation tokens
+            // are children of ours, so their flush loops will have shut down already
+            timeline::ShutdownMode::Hard
+        } else {
+            shutdown_mode
+        };
 
         match self.set_stopping(shutdown_progress, false, false).await {
             Ok(()) => {}
@@ -2469,6 +2491,7 @@ impl Tenant {
         tenant_shard_id: TenantShardId,
         remote_storage: GenericRemoteStorage,
         deletion_queue_client: DeletionQueueClient,
+        l0_flush_global_state: L0FlushGlobalState,
     ) -> Tenant {
         debug_assert!(
             !attached_conf.location.generation.is_none() || conf.control_plane_api.is_none()
@@ -2556,6 +2579,7 @@ impl Tenant {
             )),
             tenant_conf: Arc::new(ArcSwap::from_pointee(attached_conf)),
             ongoing_timeline_detach: std::sync::Mutex::default(),
+            l0_flush_global_state,
         }
     }
 
@@ -2563,36 +2587,35 @@ impl Tenant {
     pub(super) fn load_tenant_config(
         conf: &'static PageServerConf,
         tenant_shard_id: &TenantShardId,
-    ) -> anyhow::Result<LocationConf> {
+    ) -> Result<LocationConf, LoadConfigError> {
         let config_path = conf.tenant_location_config_path(tenant_shard_id);
 
-        if config_path.exists() {
-            // New-style config takes precedence
-            let deserialized = Self::read_config(&config_path)?;
-            Ok(toml_edit::de::from_document::<LocationConf>(deserialized)?)
-        } else {
-            // The config should almost always exist for a tenant directory:
-            //  - When attaching a tenant, the config is the first thing we write
-            //  - When detaching a tenant, we atomically move the directory to a tmp location
-            //    before deleting contents.
-            //
-            // The very rare edge case that can result in a missing config is if we crash during attach
-            // between creating directory and writing config.  Callers should handle that as if the
-            // directory didn't exist.
-            anyhow::bail!("tenant config not found in {}", config_path);
-        }
-    }
-
-    fn read_config(path: &Utf8Path) -> anyhow::Result<toml_edit::Document> {
-        info!("loading tenant configuration from {path}");
+        info!("loading tenant configuration from {config_path}");
 
         // load and parse file
-        let config = fs::read_to_string(path)
-            .with_context(|| format!("Failed to load config from path '{path}'"))?;
+        let config = fs::read_to_string(&config_path).map_err(|e| {
+            match e.kind() {
+                std::io::ErrorKind::NotFound => {
+                    // The config should almost always exist for a tenant directory:
+                    //  - When attaching a tenant, the config is the first thing we write
+                    //  - When detaching a tenant, we atomically move the directory to a tmp location
+                    //    before deleting contents.
+                    //
+                    // The very rare edge case that can result in a missing config is if we crash during attach
+                    // between creating directory and writing config.  Callers should handle that as if the
+                    // directory didn't exist.
 
-        config
-            .parse::<toml_edit::Document>()
-            .with_context(|| format!("Failed to parse config from file '{path}' as toml file"))
+                    LoadConfigError::NotFound(config_path)
+                }
+                _ => {
+                    // No IO errors except NotFound are acceptable here: other kinds of error indicate local storage or permissions issues
+                    // that we cannot cleanly recover
+                    crate::virtual_file::on_fatal_io_error(&e, "Reading tenant config file")
+                }
+            }
+        })?;
+
+        Ok(toml_edit::de::from_str::<LocationConf>(&config)?)
     }
 
     #[tracing::instrument(skip_all, fields(tenant_id=%tenant_shard_id.tenant_id, shard_id=%tenant_shard_id.shard_slug()))]
@@ -2600,7 +2623,7 @@ impl Tenant {
         conf: &'static PageServerConf,
         tenant_shard_id: &TenantShardId,
         location_conf: &LocationConf,
-    ) -> anyhow::Result<()> {
+    ) -> std::io::Result<()> {
         let config_path = conf.tenant_location_config_path(tenant_shard_id);
 
         Self::persist_tenant_config_at(tenant_shard_id, &config_path, location_conf).await
@@ -2611,7 +2634,7 @@ impl Tenant {
         tenant_shard_id: &TenantShardId,
         config_path: &Utf8Path,
         location_conf: &LocationConf,
-    ) -> anyhow::Result<()> {
+    ) -> std::io::Result<()> {
         debug!("persisting tenantconf to {config_path}");
 
         let mut conf_content = r#"# This file contains a specific per-tenant's config.
@@ -2620,22 +2643,20 @@ impl Tenant {
         .to_string();
 
         fail::fail_point!("tenant-config-before-write", |_| {
-            anyhow::bail!("tenant-config-before-write");
+            Err(std::io::Error::new(
+                std::io::ErrorKind::Other,
+                "tenant-config-before-write",
+            ))
         });
 
         // Convert the config to a toml file.
-        conf_content += &toml_edit::ser::to_string_pretty(&location_conf)?;
+        conf_content +=
+            &toml_edit::ser::to_string_pretty(&location_conf).expect("Config serialization failed");
 
         let temp_path = path_with_suffix_extension(config_path, TEMP_FILE_SUFFIX);
 
-        let tenant_shard_id = *tenant_shard_id;
-        let config_path = config_path.to_owned();
         let conf_content = conf_content.into_bytes();
-        VirtualFile::crashsafe_overwrite(config_path.clone(), temp_path, conf_content)
-            .await
-            .with_context(|| format!("write tenant {tenant_shard_id} config to {config_path}"))?;
-
-        Ok(())
+        VirtualFile::crashsafe_overwrite(config_path.to_owned(), temp_path, conf_content).await
     }
 
     //
@@ -2853,6 +2874,7 @@ impl Tenant {
             {
                 let mut target = timeline.gc_info.write().unwrap();
 
+                // Cull any expired leases
                 let now = SystemTime::now();
                 target.leases.retain(|_, lease| !lease.is_expired(&now));
 
@@ -2861,6 +2883,31 @@ impl Tenant {
                     .valid_lsn_lease_count_gauge
                     .set(target.leases.len() as u64);
 
+                // Look up parent's PITR cutoff to update the child's knowledge of whether it is within parent's PITR
+                if let Some(ancestor_id) = timeline.get_ancestor_timeline_id() {
+                    if let Some(ancestor_gc_cutoffs) = gc_cutoffs.get(&ancestor_id) {
+                        target.within_ancestor_pitr =
+                            timeline.get_ancestor_lsn() >= ancestor_gc_cutoffs.pitr;
+                    }
+                }
+
+                // Update metrics that depend on GC state
+                timeline
+                    .metrics
+                    .archival_size
+                    .set(if target.within_ancestor_pitr {
+                        timeline.metrics.current_logical_size_gauge.get()
+                    } else {
+                        0
+                    });
+                timeline.metrics.pitr_history_size.set(
+                    timeline
+                        .get_last_record_lsn()
+                        .checked_sub(target.cutoffs.pitr)
+                        .unwrap_or(Lsn(0))
+                        .0,
+                );
+
                 match gc_cutoffs.remove(&timeline.timeline_id) {
                     Some(cutoffs) => {
                         target.retain_lsns = branchpoints;
@@ -2912,7 +2959,7 @@ impl Tenant {
         dst_id: TimelineId,
         ancestor_lsn: Option<Lsn>,
         ctx: &RequestContext,
-        delta_layer_desc: Vec<Vec<(pageserver_api::key::Key, Lsn, crate::repository::Value)>>,
+        delta_layer_desc: Vec<timeline::DeltaLayerTestDesc>,
         image_layer_desc: Vec<(Lsn, Vec<(pageserver_api::key::Key, bytes::Bytes)>)>,
         end_lsn: Lsn,
     ) -> anyhow::Result<Arc<Timeline>> {
@@ -3296,6 +3343,7 @@ impl Tenant {
         TimelineResources {
             remote_client,
             timeline_get_throttle: self.timeline_get_throttle.clone(),
+            l0_flush_global_state: self.l0_flush_global_state.clone(),
         }
     }
 
@@ -3632,6 +3680,7 @@ pub(crate) mod harness {
     use utils::logging;
 
     use crate::deletion_queue::mock::MockDeletionQueue;
+    use crate::l0_flush::L0FlushConfig;
     use crate::walredo::apply_neon;
     use crate::{repository::Key, walrecord::NeonWalRecord};
 
@@ -3821,6 +3870,8 @@ pub(crate) mod harness {
                 self.tenant_shard_id,
                 self.remote_storage.clone(),
                 self.deletion_queue.new_client(),
+                // TODO: ideally we should run all unit tests with both configs
+                L0FlushGlobalState::new(L0FlushConfig::default()),
             ));
 
             let preload = tenant
@@ -3908,7 +3959,7 @@ mod tests {
     use storage_layer::PersistentLayerKey;
     use tests::storage_layer::ValuesReconstructState;
     use tests::timeline::{GetVectoredError, ShutdownMode};
-    use timeline::GcInfo;
+    use timeline::{DeltaLayerTestDesc, GcInfo};
     use utils::bin_ser::BeSer;
     use utils::id::TenantId;
 
@@ -6204,27 +6255,6 @@ mod tests {
             .await
             .unwrap();
 
-        async fn get_vectored_impl_wrapper(
-            tline: &Arc<Timeline>,
-            key: Key,
-            lsn: Lsn,
-            ctx: &RequestContext,
-        ) -> Result<Option<Bytes>, GetVectoredError> {
-            let mut reconstruct_state = ValuesReconstructState::new();
-            let mut res = tline
-                .get_vectored_impl(
-                    KeySpace::single(key..key.next()),
-                    lsn,
-                    &mut reconstruct_state,
-                    ctx,
-                )
-                .await?;
-            Ok(res.pop_last().map(|(k, v)| {
-                assert_eq!(k, key);
-                v.unwrap()
-            }))
-        }
-
         let lsn = Lsn(0x30);
 
         // test vectored get on parent timeline
@@ -6300,27 +6330,6 @@ mod tests {
             .await
             .unwrap();
 
-        async fn get_vectored_impl_wrapper(
-            tline: &Arc<Timeline>,
-            key: Key,
-            lsn: Lsn,
-            ctx: &RequestContext,
-        ) -> Result<Option<Bytes>, GetVectoredError> {
-            let mut reconstruct_state = ValuesReconstructState::new();
-            let mut res = tline
-                .get_vectored_impl(
-                    KeySpace::single(key..key.next()),
-                    lsn,
-                    &mut reconstruct_state,
-                    ctx,
-                )
-                .await?;
-            Ok(res.pop_last().map(|(k, v)| {
-                assert_eq!(k, key);
-                v.unwrap()
-            }))
-        }
-
         let lsn = Lsn(0x30);
 
         // test vectored get on parent timeline
@@ -6396,9 +6405,18 @@ mod tests {
                 &ctx,
                 // delta layers
                 vec![
-                    vec![(key2, Lsn(0x10), Value::Image(test_img("metadata key 2")))],
-                    vec![(key1, Lsn(0x20), Value::Image(Bytes::new()))],
-                    vec![(key2, Lsn(0x20), Value::Image(Bytes::new()))],
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x10)..Lsn(0x20),
+                        vec![(key2, Lsn(0x10), Value::Image(test_img("metadata key 2")))],
+                    ),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x20)..Lsn(0x30),
+                        vec![(key1, Lsn(0x20), Value::Image(Bytes::new()))],
+                    ),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x20)..Lsn(0x30),
+                        vec![(key2, Lsn(0x20), Value::Image(Bytes::new()))],
+                    ),
                 ],
                 // image layers
                 vec![
@@ -6464,17 +6482,29 @@ mod tests {
                 &ctx,
                 // delta layers
                 vec![
-                    vec![(key2, Lsn(0x10), Value::Image(test_img("metadata key 2")))],
-                    vec![(key1, Lsn(0x20), Value::Image(Bytes::new()))],
-                    vec![(key2, Lsn(0x20), Value::Image(Bytes::new()))],
-                    vec![
-                        (key0, Lsn(0x30), Value::Image(test_img("metadata key 0"))),
-                        (key3, Lsn(0x30), Value::Image(test_img("metadata key 3"))),
-                    ],
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x10)..Lsn(0x20),
+                        vec![(key2, Lsn(0x10), Value::Image(test_img("metadata key 2")))],
+                    ),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x20)..Lsn(0x30),
+                        vec![(key1, Lsn(0x20), Value::Image(Bytes::new()))],
+                    ),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x20)..Lsn(0x30),
+                        vec![(key2, Lsn(0x20), Value::Image(Bytes::new()))],
+                    ),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x30)..Lsn(0x40),
+                        vec![
+                            (key0, Lsn(0x30), Value::Image(test_img("metadata key 0"))),
+                            (key3, Lsn(0x30), Value::Image(test_img("metadata key 3"))),
+                        ],
+                    ),
                 ],
                 // image layers
                 vec![(Lsn(0x10), vec![(key1, test_img("metadata key 1"))])],
-                Lsn(0x30),
+                Lsn(0x40),
             )
             .await
             .unwrap();
@@ -6497,7 +6527,7 @@ mod tests {
 
         // Image layers are created at last_record_lsn
         let images = tline
-            .inspect_image_layers(Lsn(0x30), &ctx)
+            .inspect_image_layers(Lsn(0x40), &ctx)
             .await
             .unwrap()
             .into_iter()
@@ -6523,9 +6553,18 @@ mod tests {
                 &ctx,
                 // delta layers
                 vec![
-                    vec![(key2, Lsn(0x10), Value::Image(test_img("metadata key 2")))],
-                    vec![(key1, Lsn(0x20), Value::Image(Bytes::new()))],
-                    vec![(key2, Lsn(0x20), Value::Image(Bytes::new()))],
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x10)..Lsn(0x20),
+                        vec![(key2, Lsn(0x10), Value::Image(test_img("metadata key 2")))],
+                    ),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x20)..Lsn(0x30),
+                        vec![(key1, Lsn(0x20), Value::Image(Bytes::new()))],
+                    ),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(
+                        Lsn(0x20)..Lsn(0x30),
+                        vec![(key2, Lsn(0x20), Value::Image(Bytes::new()))],
+                    ),
                 ],
                 // image layers
                 vec![(Lsn(0x10), vec![(key1, test_img("metadata key 1"))])],
@@ -6573,15 +6612,21 @@ mod tests {
             key
         }
 
-        // We create one bottom-most image layer, a delta layer D1 crossing the GC horizon, D2 below the horizon, and D3 above the horizon.
+        // We create
+        // - one bottom-most image layer,
+        // - a delta layer D1 crossing the GC horizon with data below and above the horizon,
+        // - a delta layer D2 crossing the GC horizon with data only below the horizon,
+        // - a delta layer D3 above the horizon.
         //
-        //  | D1 |                       | D3 |
+        //                             | D3 |
+        //  | D1 |
         // -|    |-- gc horizon -----------------
         //  |    |                | D2 |
         // --------- img layer ------------------
         //
         // What we should expact from this compaction is:
-        //  | Part of D1 |               | D3 |
+        //                             | D3 |
+        //  | Part of D1 |
         // --------- img layer with D1+D2 at GC horizon------------------
 
         // img layer at 0x10
@@ -6621,13 +6666,13 @@ mod tests {
         let delta3 = vec![
             (
                 get_key(8),
-                Lsn(0x40),
-                Value::Image(Bytes::from("value 8@0x40")),
+                Lsn(0x48),
+                Value::Image(Bytes::from("value 8@0x48")),
             ),
             (
                 get_key(9),
-                Lsn(0x40),
-                Value::Image(Bytes::from("value 9@0x40")),
+                Lsn(0x48),
+                Value::Image(Bytes::from("value 9@0x48")),
             ),
         ];
 
@@ -6637,7 +6682,11 @@ mod tests {
                 Lsn(0x10),
                 DEFAULT_PG_VERSION,
                 &ctx,
-                vec![delta1, delta2, delta3], // delta layers
+                vec![
+                    DeltaLayerTestDesc::new_with_inferred_key_range(Lsn(0x20)..Lsn(0x48), delta1),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(Lsn(0x20)..Lsn(0x48), delta2),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(Lsn(0x48)..Lsn(0x50), delta3),
+                ], // delta layers
                 vec![(Lsn(0x10), img_layer)], // image layers
                 Lsn(0x50),
             )
@@ -6658,8 +6707,8 @@ mod tests {
             Bytes::from_static(b"value 5@0x20"),
             Bytes::from_static(b"value 6@0x20"),
             Bytes::from_static(b"value 7@0x10"),
-            Bytes::from_static(b"value 8@0x40"),
-            Bytes::from_static(b"value 9@0x40"),
+            Bytes::from_static(b"value 8@0x48"),
+            Bytes::from_static(b"value 9@0x48"),
         ];
 
         for (idx, expected) in expected_result.iter().enumerate() {
@@ -6747,10 +6796,10 @@ mod tests {
                     lsn_range: Lsn(0x30)..Lsn(0x41),
                     is_delta: true
                 },
-                // The delta layer we created and should not be picked for the compaction
+                // The delta3 layer that should not be picked for the compaction
                 PersistentLayerKey {
                     key_range: get_key(8)..get_key(10),
-                    lsn_range: Lsn(0x40)..Lsn(0x41),
+                    lsn_range: Lsn(0x48)..Lsn(0x50),
                     is_delta: true
                 }
             ]
@@ -6814,7 +6863,10 @@ mod tests {
                 Lsn(0x10),
                 DEFAULT_PG_VERSION,
                 &ctx,
-                vec![delta1],              // delta layers
+                vec![DeltaLayerTestDesc::new_with_inferred_key_range(
+                    Lsn(0x10)..Lsn(0x40),
+                    delta1,
+                )], // delta layers
                 vec![(Lsn(0x10), image1)], // image layers
                 Lsn(0x50),
             )
@@ -6938,15 +6990,21 @@ mod tests {
             key
         }
 
-        // We create one bottom-most image layer, a delta layer D1 crossing the GC horizon, D2 below the horizon, and D3 above the horizon.
+        // We create
+        // - one bottom-most image layer,
+        // - a delta layer D1 crossing the GC horizon with data below and above the horizon,
+        // - a delta layer D2 crossing the GC horizon with data only below the horizon,
+        // - a delta layer D3 above the horizon.
         //
-        //  | D1 |                       | D3 |
+        //                             | D3 |
+        //  | D1 |
         // -|    |-- gc horizon -----------------
         //  |    |                | D2 |
         // --------- img layer ------------------
         //
         // What we should expact from this compaction is:
-        //  | Part of D1 |               | D3 |
+        //                             | D3 |
+        //  | Part of D1 |
         // --------- img layer with D1+D2 at GC horizon------------------
 
         // img layer at 0x10
@@ -6996,13 +7054,13 @@ mod tests {
         let delta3 = vec![
             (
                 get_key(8),
-                Lsn(0x40),
-                Value::WalRecord(NeonWalRecord::wal_append("@0x40")),
+                Lsn(0x48),
+                Value::WalRecord(NeonWalRecord::wal_append("@0x48")),
             ),
             (
                 get_key(9),
-                Lsn(0x40),
-                Value::WalRecord(NeonWalRecord::wal_append("@0x40")),
+                Lsn(0x48),
+                Value::WalRecord(NeonWalRecord::wal_append("@0x48")),
             ),
         ];
 
@@ -7012,7 +7070,11 @@ mod tests {
                 Lsn(0x10),
                 DEFAULT_PG_VERSION,
                 &ctx,
-                vec![delta1, delta2, delta3], // delta layers
+                vec![
+                    DeltaLayerTestDesc::new_with_inferred_key_range(Lsn(0x10)..Lsn(0x48), delta1),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(Lsn(0x10)..Lsn(0x48), delta2),
+                    DeltaLayerTestDesc::new_with_inferred_key_range(Lsn(0x48)..Lsn(0x50), delta3),
+                ], // delta layers
                 vec![(Lsn(0x10), img_layer)], // image layers
                 Lsn(0x50),
             )
@@ -7027,6 +7089,7 @@ mod tests {
                     horizon: Lsn(0x30),
                 },
                 leases: Default::default(),
+                within_ancestor_pitr: false,
             };
         }
 
@@ -7039,8 +7102,8 @@ mod tests {
             Bytes::from_static(b"value 5@0x10@0x20"),
             Bytes::from_static(b"value 6@0x10@0x20"),
             Bytes::from_static(b"value 7@0x10"),
-            Bytes::from_static(b"value 8@0x10@0x40"),
-            Bytes::from_static(b"value 9@0x10@0x40"),
+            Bytes::from_static(b"value 8@0x10@0x48"),
+            Bytes::from_static(b"value 9@0x10@0x48"),
         ];
 
         let expected_result_at_gc_horizon = [

pageserver/src/tenant/blob_io.rs

@@ -6,13 +6,20 @@
 //! is written as a one byte. If it's larger than that, the length
 //! is written as a four-byte integer, in big-endian, with the high
 //! bit set. This way, we can detect whether it's 1- or 4-byte header
-//! by peeking at the first byte.
+//! by peeking at the first byte. For blobs larger than 128 bits,
+//! we also specify three reserved bits, only one of the three bit
+//! patterns is currently in use (0b011) and signifies compression
+//! with zstd.
 //!
 //! len <  128: 0XXXXXXX
-//! len >= 128: 1XXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
+//! len >= 128: 1CCCXXXX XXXXXXXX XXXXXXXX XXXXXXXX
 //!
+use async_compression::Level;
 use bytes::{BufMut, BytesMut};
+use pageserver_api::models::ImageCompressionAlgorithm;
+use tokio::io::AsyncWriteExt;
 use tokio_epoll_uring::{BoundedBuf, IoBuf, Slice};
+use tracing::warn;
 
 use crate::context::RequestContext;
 use crate::page_cache::PAGE_SZ;
@@ -66,12 +73,37 @@ impl<'a> BlockCursor<'a> {
                 len_buf.copy_from_slice(&buf[off..off + 4]);
                 off += 4;
             }
-            len_buf[0] &= 0x7f;
+            let bit_mask = if self.read_compressed {
+                !LEN_COMPRESSION_BIT_MASK
+            } else {
+                0x7f
+            };
+            len_buf[0] &= bit_mask;
             u32::from_be_bytes(len_buf) as usize
         };
+        let compression_bits = first_len_byte & LEN_COMPRESSION_BIT_MASK;
 
-        dstbuf.clear();
-        dstbuf.reserve(len);
+        let mut tmp_buf = Vec::new();
+        let buf_to_write;
+        let compression = if compression_bits <= BYTE_UNCOMPRESSED || !self.read_compressed {
+            if compression_bits > BYTE_UNCOMPRESSED {
+                warn!("reading key above future limit ({len} bytes)");
+            }
+            buf_to_write = dstbuf;
+            None
+        } else if compression_bits == BYTE_ZSTD {
+            buf_to_write = &mut tmp_buf;
+            Some(dstbuf)
+        } else {
+            let error = std::io::Error::new(
+                std::io::ErrorKind::InvalidData,
+                format!("invalid compression byte {compression_bits:x}"),
+            );
+            return Err(error);
+        };
+
+        buf_to_write.clear();
+        buf_to_write.reserve(len);
 
         // Read the payload
         let mut remain = len;
@@ -85,14 +117,35 @@ impl<'a> BlockCursor<'a> {
                 page_remain = PAGE_SZ;
             }
             let this_blk_len = min(remain, page_remain);
-            dstbuf.extend_from_slice(&buf[off..off + this_blk_len]);
+            buf_to_write.extend_from_slice(&buf[off..off + this_blk_len]);
             remain -= this_blk_len;
             off += this_blk_len;
         }
+
+        if let Some(dstbuf) = compression {
+            if compression_bits == BYTE_ZSTD {
+                let mut decoder = async_compression::tokio::write::ZstdDecoder::new(dstbuf);
+                decoder.write_all(buf_to_write).await?;
+                decoder.flush().await?;
+            } else {
+                unreachable!("already checked above")
+            }
+        }
+
         Ok(())
     }
 }
 
+/// Reserved bits for length and compression
+const LEN_COMPRESSION_BIT_MASK: u8 = 0xf0;
+
+/// The maximum size of blobs we support. The highest few bits
+/// are reserved for compression and other further uses.
+const MAX_SUPPORTED_LEN: usize = 0x0fff_ffff;
+
+const BYTE_UNCOMPRESSED: u8 = 0x80;
+const BYTE_ZSTD: u8 = BYTE_UNCOMPRESSED | 0x10;
+
 /// A wrapper of `VirtualFile` that allows users to write blobs.
 ///
 /// If a `BlobWriter` is dropped, the internal buffer will be
@@ -219,6 +272,22 @@ impl<const BUFFERED: bool> BlobWriter<BUFFERED> {
         &mut self,
         srcbuf: B,
         ctx: &RequestContext,
+    ) -> (B::Buf, Result<u64, Error>) {
+        self.write_blob_maybe_compressed(
+            srcbuf,
+            ctx,
+            ImageCompressionAlgorithm::DisabledNoDecompress,
+        )
+        .await
+    }
+
+    /// Write a blob of data. Returns the offset that it was written to,
+    /// which can be used to retrieve the data later.
+    pub async fn write_blob_maybe_compressed<B: BoundedBuf<Buf = Buf>, Buf: IoBuf + Send>(
+        &mut self,
+        srcbuf: B,
+        ctx: &RequestContext,
+        algorithm: ImageCompressionAlgorithm,
     ) -> (B::Buf, Result<u64, Error>) {
         let offset = self.offset;
 
@@ -226,29 +295,61 @@ impl<const BUFFERED: bool> BlobWriter<BUFFERED> {
 
         let mut io_buf = self.io_buf.take().expect("we always put it back below");
         io_buf.clear();
-        let (io_buf, hdr_res) = async {
+        let mut compressed_buf = None;
+        let ((io_buf, hdr_res), srcbuf) = async {
             if len < 128 {
                 // Short blob. Write a 1-byte length header
                 io_buf.put_u8(len as u8);
-                self.write_all(io_buf, ctx).await
+                (
+                    self.write_all(io_buf, ctx).await,
+                    srcbuf.slice_full().into_inner(),
+                )
             } else {
                 // Write a 4-byte length header
-                if len > 0x7fff_ffff {
+                if len > MAX_SUPPORTED_LEN {
                     return (
-                        io_buf,
-                        Err(Error::new(
-                            ErrorKind::Other,
-                            format!("blob too large ({len} bytes)"),
-                        )),
+                        (
+                            io_buf,
+                            Err(Error::new(
+                                ErrorKind::Other,
+                                format!("blob too large ({len} bytes)"),
+                            )),
+                        ),
+                        srcbuf.slice_full().into_inner(),
                     );
                 }
-                if len > 0x0fff_ffff {
-                    tracing::warn!("writing blob above future limit ({len} bytes)");
-                }
-                let mut len_buf = (len as u32).to_be_bytes();
-                len_buf[0] |= 0x80;
+                let (high_bit_mask, len_written, srcbuf) = match algorithm {
+                    ImageCompressionAlgorithm::Zstd { level } => {
+                        let mut encoder = if let Some(level) = level {
+                            async_compression::tokio::write::ZstdEncoder::with_quality(
+                                Vec::new(),
+                                Level::Precise(level.into()),
+                            )
+                        } else {
+                            async_compression::tokio::write::ZstdEncoder::new(Vec::new())
+                        };
+                        let slice = srcbuf.slice_full();
+                        encoder.write_all(&slice[..]).await.unwrap();
+                        encoder.shutdown().await.unwrap();
+                        let compressed = encoder.into_inner();
+                        if compressed.len() < len {
+                            let compressed_len = compressed.len();
+                            compressed_buf = Some(compressed);
+                            (BYTE_ZSTD, compressed_len, slice.into_inner())
+                        } else {
+                            (BYTE_UNCOMPRESSED, len, slice.into_inner())
+                        }
+                    }
+                    ImageCompressionAlgorithm::Disabled
+                    | ImageCompressionAlgorithm::DisabledNoDecompress => {
+                        (BYTE_UNCOMPRESSED, len, srcbuf.slice_full().into_inner())
+                    }
+                };
+                let mut len_buf = (len_written as u32).to_be_bytes();
+                assert_eq!(len_buf[0] & 0xf0, 0);
+                len_buf[0] |= high_bit_mask;
                 io_buf.extend_from_slice(&len_buf[..]);
-                self.write_all(io_buf, ctx).await
+                (self.write_all(io_buf, ctx).await, srcbuf)
             }
         }
         .await;
@@ -257,7 +358,12 @@ impl<const BUFFERED: bool> BlobWriter<BUFFERED> {
             Ok(_) => (),
             Err(e) => return (Slice::into_inner(srcbuf.slice(..)), Err(e)),
         }
-        let (srcbuf, res) = self.write_all(srcbuf, ctx).await;
+        let (srcbuf, res) = if let Some(compressed_buf) = compressed_buf {
+            let (_buf, res) = self.write_all(compressed_buf, ctx).await;
+            (Slice::into_inner(srcbuf.slice(..)), res)
+        } else {
+            self.write_all(srcbuf, ctx).await
+        };
         (srcbuf, res.map(|_| offset))
     }
 }
@@ -295,6 +401,13 @@ mod tests {
     use rand::{Rng, SeedableRng};
 
     async fn round_trip_test<const BUFFERED: bool>(blobs: &[Vec<u8>]) -> Result<(), Error> {
+        round_trip_test_compressed::<BUFFERED>(blobs, false).await
+    }
+
+    async fn round_trip_test_compressed<const BUFFERED: bool>(
+        blobs: &[Vec<u8>],
+        compression: bool,
+    ) -> Result<(), Error> {
         let temp_dir = camino_tempfile::tempdir()?;
         let pathbuf = temp_dir.path().join("file");
         let ctx = RequestContext::new(TaskKind::UnitTest, DownloadBehavior::Error);
@@ -305,7 +418,16 @@ mod tests {
             let file = VirtualFile::create(pathbuf.as_path(), &ctx).await?;
             let mut wtr = BlobWriter::<BUFFERED>::new(file, 0);
             for blob in blobs.iter() {
-                let (_, res) = wtr.write_blob(blob.clone(), &ctx).await;
+                let (_, res) = if compression {
+                    wtr.write_blob_maybe_compressed(
+                        blob.clone(),
+                        &ctx,
+                        ImageCompressionAlgorithm::Zstd { level: Some(1) },
+                    )
+                    .await
+                } else {
+                    wtr.write_blob(blob.clone(), &ctx).await
+                };
                 let offs = res?;
                 offsets.push(offs);
             }
@@ -319,7 +441,7 @@ mod tests {
 
         let file = VirtualFile::open(pathbuf.as_path(), &ctx).await?;
         let rdr = BlockReaderRef::VirtualFile(&file);
-        let rdr = BlockCursor::new(rdr);
+        let rdr = BlockCursor::new_with_compression(rdr, compression);
         for (idx, (blob, offset)) in blobs.iter().zip(offsets.iter()).enumerate() {
             let blob_read = rdr.read_blob(*offset, &ctx).await?;
             assert_eq!(
@@ -353,6 +475,8 @@ mod tests {
         ];
         round_trip_test::<false>(blobs).await?;
         round_trip_test::<true>(blobs).await?;
+        round_trip_test_compressed::<false>(blobs, true).await?;
+        round_trip_test_compressed::<true>(blobs, true).await?;
         Ok(())
     }
 
@@ -361,10 +485,15 @@ mod tests {
         let blobs = &[
             b"test".to_vec(),
             random_array(10 * PAGE_SZ),
+            b"hello".to_vec(),
+            random_array(66 * PAGE_SZ),
+            vec![0xf3; 24 * PAGE_SZ],
             b"foobar".to_vec(),
         ];
         round_trip_test::<false>(blobs).await?;
         round_trip_test::<true>(blobs).await?;
+        round_trip_test_compressed::<false>(blobs, true).await?;
+        round_trip_test_compressed::<true>(blobs, true).await?;
         Ok(())
     }
 

pageserver/src/tenant/block_io.rs

@@ -37,6 +37,7 @@ where
 pub enum BlockLease<'a> {
     PageReadGuard(PageReadGuard<'static>),
     EphemeralFileMutableTail(&'a [u8; PAGE_SZ]),
+    Slice(&'a [u8; PAGE_SZ]),
     #[cfg(test)]
     Arc(std::sync::Arc<[u8; PAGE_SZ]>),
     #[cfg(test)]
@@ -63,6 +64,7 @@ impl<'a> Deref for BlockLease<'a> {
         match self {
             BlockLease::PageReadGuard(v) => v.deref(),
             BlockLease::EphemeralFileMutableTail(v) => v,
+            BlockLease::Slice(v) => v,
             #[cfg(test)]
             BlockLease::Arc(v) => v.deref(),
             #[cfg(test)]
@@ -81,6 +83,7 @@ pub(crate) enum BlockReaderRef<'a> {
     FileBlockReader(&'a FileBlockReader<'a>),
     EphemeralFile(&'a EphemeralFile),
     Adapter(Adapter<&'a DeltaLayerInner>),
+    Slice(&'a [u8]),
     #[cfg(test)]
     TestDisk(&'a super::disk_btree::tests::TestDisk),
     #[cfg(test)]
@@ -99,6 +102,7 @@ impl<'a> BlockReaderRef<'a> {
             FileBlockReader(r) => r.read_blk(blknum, ctx).await,
             EphemeralFile(r) => r.read_blk(blknum, ctx).await,
             Adapter(r) => r.read_blk(blknum, ctx).await,
+            Slice(s) => Self::read_blk_slice(s, blknum),
             #[cfg(test)]
             TestDisk(r) => r.read_blk(blknum),
             #[cfg(test)]
@@ -107,6 +111,24 @@ impl<'a> BlockReaderRef<'a> {
     }
 }
 
+impl<'a> BlockReaderRef<'a> {
+    fn read_blk_slice(slice: &[u8], blknum: u32) -> std::io::Result<BlockLease> {
+        let start = (blknum as usize).checked_mul(PAGE_SZ).unwrap();
+        let end = start.checked_add(PAGE_SZ).unwrap();
+        if end > slice.len() {
+            return Err(std::io::Error::new(
+                std::io::ErrorKind::UnexpectedEof,
+                format!("slice too short, len={} end={}", slice.len(), end),
+            ));
+        }
+        let slice = &slice[start..end];
+        let page_sized: &[u8; PAGE_SZ] = slice
+            .try_into()
+            .expect("we add PAGE_SZ to start, so the slice must have PAGE_SZ");
+        Ok(BlockLease::Slice(page_sized))
+    }
+}
+
 ///
 /// A "cursor" for efficiently reading multiple pages from a BlockReader
 ///
@@ -127,16 +149,24 @@ impl<'a> BlockReaderRef<'a> {
 /// ```
 ///
 pub struct BlockCursor<'a> {
+    pub(super) read_compressed: bool,
     reader: BlockReaderRef<'a>,
 }
 
 impl<'a> BlockCursor<'a> {
     pub(crate) fn new(reader: BlockReaderRef<'a>) -> Self {
-        BlockCursor { reader }
+        Self::new_with_compression(reader, false)
+    }
+    pub(crate) fn new_with_compression(reader: BlockReaderRef<'a>, read_compressed: bool) -> Self {
+        BlockCursor {
+            read_compressed,
+            reader,
+        }
     }
     // Needed by cli
     pub fn new_fileblockreader(reader: &'a FileBlockReader) -> Self {
         BlockCursor {
+            read_compressed: false,
             reader: BlockReaderRef::FileBlockReader(reader),
         }
     }
@@ -166,11 +196,25 @@ pub struct FileBlockReader<'a> {
 
     /// Unique ID of this file, used as key in the page cache.
     file_id: page_cache::FileId,
+
+    compressed_reads: bool,
 }
 
 impl<'a> FileBlockReader<'a> {
     pub fn new(file: &'a VirtualFile, file_id: FileId) -> Self {
-        FileBlockReader { file_id, file }
+        Self::new_with_compression(file, file_id, false)
+    }
+
+    pub fn new_with_compression(
+        file: &'a VirtualFile,
+        file_id: FileId,
+        compressed_reads: bool,
+    ) -> Self {
+        FileBlockReader {
+            file_id,
+            file,
+            compressed_reads,
+        }
     }
 
     /// Read a page from the underlying file into given buffer.
@@ -217,7 +261,10 @@ impl<'a> FileBlockReader<'a> {
 
 impl BlockReader for FileBlockReader<'_> {
     fn block_cursor(&self) -> BlockCursor<'_> {
-        BlockCursor::new(BlockReaderRef::FileBlockReader(self))
+        BlockCursor::new_with_compression(
+            BlockReaderRef::FileBlockReader(self),
+            self.compressed_reads,
+        )
     }
 }
 

pageserver/src/tenant/ephemeral_file.rs

@@ -21,6 +21,7 @@ pub struct EphemeralFile {
 }
 
 mod page_caching;
+pub(crate) use page_caching::PrewarmOnWrite as PrewarmPageCacheOnWrite;
 mod zero_padded_read_write;
 
 impl EphemeralFile {
@@ -53,7 +54,7 @@ impl EphemeralFile {
         Ok(EphemeralFile {
             _tenant_shard_id: tenant_shard_id,
             _timeline_id: timeline_id,
-            rw: page_caching::RW::new(file),
+            rw: page_caching::RW::new(file, conf.l0_flush.prewarm_on_write()),
         })
     }
 
@@ -65,6 +66,11 @@ impl EphemeralFile {
         self.rw.page_cache_file_id()
     }
 
+    /// See [`self::page_caching::RW::load_to_vec`].
+    pub(crate) async fn load_to_vec(&self, ctx: &RequestContext) -> Result<Vec<u8>, io::Error> {
+        self.rw.load_to_vec(ctx).await
+    }
+
     pub(crate) async fn read_blk(
         &self,
         blknum: u32,

pageserver/src/tenant/ephemeral_file/page_caching.rs

@@ -8,6 +8,7 @@ use crate::virtual_file::VirtualFile;
 
 use once_cell::sync::Lazy;
 use std::io::{self, ErrorKind};
+use std::ops::{Deref, Range};
 use tokio_epoll_uring::BoundedBuf;
 use tracing::*;
 
@@ -19,14 +20,23 @@ pub struct RW {
     rw: super::zero_padded_read_write::RW<PreWarmingWriter>,
 }
 
+/// When we flush a block to the underlying [`crate::virtual_file::VirtualFile`],
+/// should we pre-warm the [`crate::page_cache`] with the contents?
+#[derive(Clone, Copy)]
+pub enum PrewarmOnWrite {
+    Yes,
+    No,
+}
+
 impl RW {
-    pub fn new(file: VirtualFile) -> Self {
+    pub fn new(file: VirtualFile, prewarm_on_write: PrewarmOnWrite) -> Self {
         let page_cache_file_id = page_cache::next_file_id();
         Self {
             page_cache_file_id,
             rw: super::zero_padded_read_write::RW::new(PreWarmingWriter::new(
                 page_cache_file_id,
                 file,
+                prewarm_on_write,
             )),
         }
     }
@@ -49,6 +59,43 @@ impl RW {
         self.rw.bytes_written()
     }
 
+    /// Load all blocks that can be read via [`Self::read_blk`] into a contiguous memory buffer.
+    ///
+    /// This includes the blocks that aren't yet flushed to disk by the internal buffered writer.
+    /// The last block is zero-padded to [`PAGE_SZ`], so, the returned buffer is always a multiple of [`PAGE_SZ`].
+    pub(super) async fn load_to_vec(&self, ctx: &RequestContext) -> Result<Vec<u8>, io::Error> {
+        // round up to the next PAGE_SZ multiple, required by blob_io
+        let size = {
+            let s = usize::try_from(self.bytes_written()).unwrap();
+            if s % PAGE_SZ == 0 {
+                s
+            } else {
+                s.checked_add(PAGE_SZ - (s % PAGE_SZ)).unwrap()
+            }
+        };
+        let vec = Vec::with_capacity(size);
+
+        // read from disk what we've already flushed
+        let writer = self.rw.as_writer();
+        let flushed_range = writer.written_range();
+        let mut vec = writer
+            .file
+            .read_exact_at(
+                vec.slice(0..(flushed_range.end - flushed_range.start)),
+                u64::try_from(flushed_range.start).unwrap(),
+                ctx,
+            )
+            .await?
+            .into_inner();
+
+        // copy from in-memory buffer what we haven't flushed yet but would return when accessed via read_blk
+        let buffered = self.rw.get_tail_zero_padded();
+        vec.extend_from_slice(buffered);
+        assert_eq!(vec.len(), size);
+        assert_eq!(vec.len() % PAGE_SZ, 0);
+        Ok(vec)
+    }
+
     pub(crate) async fn read_blk(
         &self,
         blknum: u32,
@@ -116,19 +163,40 @@ impl Drop for RW {
 }
 
 struct PreWarmingWriter {
+    prewarm_on_write: PrewarmOnWrite,
     nwritten_blocks: u32,
     page_cache_file_id: page_cache::FileId,
     file: VirtualFile,
 }
 
 impl PreWarmingWriter {
-    fn new(page_cache_file_id: page_cache::FileId, file: VirtualFile) -> Self {
+    fn new(
+        page_cache_file_id: page_cache::FileId,
+        file: VirtualFile,
+        prewarm_on_write: PrewarmOnWrite,
+    ) -> Self {
         Self {
+            prewarm_on_write,
             nwritten_blocks: 0,
             page_cache_file_id,
             file,
         }
     }
+
+    /// Return the byte range within `file` that has been written though `write_all`.
+    ///
+    /// The returned range would be invalidated by another `write_all`. To prevent that, we capture `&_`.
+    fn written_range(&self) -> (impl Deref<Target = Range<usize>> + '_) {
+        let nwritten_blocks = usize::try_from(self.nwritten_blocks).unwrap();
+        struct Wrapper(Range<usize>);
+        impl Deref for Wrapper {
+            type Target = Range<usize>;
+            fn deref(&self) -> &Range<usize> {
+                &self.0
+            }
+        }
+        Wrapper(0..nwritten_blocks * PAGE_SZ)
+    }
 }
 
 impl crate::virtual_file::owned_buffers_io::write::OwnedAsyncWriter for PreWarmingWriter {
@@ -178,45 +246,51 @@ impl crate::virtual_file::owned_buffers_io::write::OwnedAsyncWriter for PreWarmi
             assert_eq!(&check_bounds_stuff_works, &*buf);
         }
 
-        // Pre-warm page cache with the contents.
-        // At least in isolated bulk ingest benchmarks (test_bulk_insert.py), the pre-warming
-        // benefits the code that writes InMemoryLayer=>L0 layers.
         let nblocks = buflen / PAGE_SZ;
         let nblocks32 = u32::try_from(nblocks).unwrap();
-        let cache = page_cache::get();
-        static CTX: Lazy<RequestContext> = Lazy::new(|| {
-            RequestContext::new(
-                crate::task_mgr::TaskKind::EphemeralFilePreWarmPageCache,
-                crate::context::DownloadBehavior::Error,
-            )
-        });
-        for blknum_in_buffer in 0..nblocks {
-            let blk_in_buffer = &buf[blknum_in_buffer * PAGE_SZ..(blknum_in_buffer + 1) * PAGE_SZ];
-            let blknum = self
-                .nwritten_blocks
-                .checked_add(blknum_in_buffer as u32)
-                .unwrap();
-            match cache
-                .read_immutable_buf(self.page_cache_file_id, blknum, &CTX)
-                .await
-            {
-                Err(e) => {
-                    error!("ephemeral_file write_blob failed to get immutable buf to pre-warm page cache: {e:?}");
-                    // fail gracefully, it's not the end of the world if we can't pre-warm the cache here
-                }
-                Ok(v) => match v {
-                    page_cache::ReadBufResult::Found(_guard) => {
-                        // This function takes &mut self, so, it shouldn't be possible to reach this point.
-                        unreachable!("we just wrote block {blknum} to the VirtualFile, which is owned by Self, \
+
+        if matches!(self.prewarm_on_write, PrewarmOnWrite::Yes) {
+            // Pre-warm page cache with the contents.
+            // At least in isolated bulk ingest benchmarks (test_bulk_insert.py), the pre-warming
+            // benefits the code that writes InMemoryLayer=>L0 layers.
+
+            let cache = page_cache::get();
+            static CTX: Lazy<RequestContext> = Lazy::new(|| {
+                RequestContext::new(
+                    crate::task_mgr::TaskKind::EphemeralFilePreWarmPageCache,
+                    crate::context::DownloadBehavior::Error,
+                )
+            });
+            for blknum_in_buffer in 0..nblocks {
+                let blk_in_buffer =
+                    &buf[blknum_in_buffer * PAGE_SZ..(blknum_in_buffer + 1) * PAGE_SZ];
+                let blknum = self
+                    .nwritten_blocks
+                    .checked_add(blknum_in_buffer as u32)
+                    .unwrap();
+                match cache
+                    .read_immutable_buf(self.page_cache_file_id, blknum, &CTX)
+                    .await
+                {
+                    Err(e) => {
+                        error!("ephemeral_file write_blob failed to get immutable buf to pre-warm page cache: {e:?}");
+                        // fail gracefully, it's not the end of the world if we can't pre-warm the cache here
+                    }
+                    Ok(v) => match v {
+                        page_cache::ReadBufResult::Found(_guard) => {
+                            // This function takes &mut self, so, it shouldn't be possible to reach this point.
+                            unreachable!("we just wrote block {blknum} to the VirtualFile, which is owned by Self, \
                                       and this function takes &mut self, so, no concurrent read_blk is possible");
-                    }
-                    page_cache::ReadBufResult::NotFound(mut write_guard) => {
-                        write_guard.copy_from_slice(blk_in_buffer);
-                        let _ = write_guard.mark_valid();
-                    }
-                },
+                        }
+                        page_cache::ReadBufResult::NotFound(mut write_guard) => {
+                            write_guard.copy_from_slice(blk_in_buffer);
+                            let _ = write_guard.mark_valid();
+                        }
+                    },
+                }
             }
         }
+
         self.nwritten_blocks = self.nwritten_blocks.checked_add(nblocks32).unwrap();
         Ok((buflen, buf.into_inner()))
     }

pageserver/src/tenant/ephemeral_file/zero_padded_read_write.rs

@@ -75,6 +75,21 @@ where
         flushed_offset + u64::try_from(buffer.pending()).unwrap()
     }
 
+    /// Get a slice of all blocks that [`Self::read_blk`] would return as [`ReadResult::ServedFromZeroPaddedMutableTail`].
+    pub fn get_tail_zero_padded(&self) -> &[u8] {
+        let buffer: &zero_padded::Buffer<TAIL_SZ> = self.buffered_writer.inspect_buffer();
+        let buffer_written_up_to = buffer.pending();
+        // pad to next page boundary
+        let read_up_to = if buffer_written_up_to % PAGE_SZ == 0 {
+            buffer_written_up_to
+        } else {
+            buffer_written_up_to
+                .checked_add(PAGE_SZ - (buffer_written_up_to % PAGE_SZ))
+                .unwrap()
+        };
+        &buffer.as_zero_padded_slice()[0..read_up_to]
+    }
+
     pub(crate) async fn read_blk(&self, blknum: u32) -> Result<ReadResult<'_, W>, std::io::Error> {
         let flushed_offset = self.buffered_writer.as_inner().bytes_written();
         let buffer: &zero_padded::Buffer<TAIL_SZ> = self.buffered_writer.inspect_buffer();

pageserver/src/tenant/mgr.rs

@@ -43,7 +43,8 @@ use crate::tenant::config::{
 use crate::tenant::span::debug_assert_current_span_has_tenant_id;
 use crate::tenant::storage_layer::inmemory_layer;
 use crate::tenant::timeline::ShutdownMode;
-use crate::tenant::{AttachedTenantConf, GcError, SpawnMode, Tenant, TenantState};
+use crate::tenant::{AttachedTenantConf, GcError, LoadConfigError, SpawnMode, Tenant, TenantState};
+use crate::virtual_file::MaybeFatalIo;
 use crate::{InitializationOrder, TEMP_FILE_SUFFIX};
 
 use utils::crashsafe::path_with_suffix_extension;
@@ -272,7 +273,7 @@ pub struct TenantManager {
 }
 
 fn emergency_generations(
-    tenant_confs: &HashMap<TenantShardId, anyhow::Result<LocationConf>>,
+    tenant_confs: &HashMap<TenantShardId, Result<LocationConf, LoadConfigError>>,
 ) -> HashMap<TenantShardId, TenantStartupMode> {
     tenant_confs
         .iter()
@@ -296,7 +297,7 @@ fn emergency_generations(
 
 async fn init_load_generations(
     conf: &'static PageServerConf,
-    tenant_confs: &HashMap<TenantShardId, anyhow::Result<LocationConf>>,
+    tenant_confs: &HashMap<TenantShardId, Result<LocationConf, LoadConfigError>>,
     resources: &TenantSharedResources,
     cancel: &CancellationToken,
 ) -> anyhow::Result<Option<HashMap<TenantShardId, TenantStartupMode>>> {
@@ -346,56 +347,32 @@ async fn init_load_generations(
 /// Given a directory discovered in the pageserver's tenants/ directory, attempt
 /// to load a tenant config from it.
 ///
-/// If file is missing, return Ok(None)
+/// If we cleaned up something expected (like an empty dir or a temp dir), return None.
 fn load_tenant_config(
     conf: &'static PageServerConf,
+    tenant_shard_id: TenantShardId,
     dentry: Utf8DirEntry,
-) -> anyhow::Result<Option<(TenantShardId, anyhow::Result<LocationConf>)>> {
+) -> Option<Result<LocationConf, LoadConfigError>> {
     let tenant_dir_path = dentry.path().to_path_buf();
     if crate::is_temporary(&tenant_dir_path) {
         info!("Found temporary tenant directory, removing: {tenant_dir_path}");
         // No need to use safe_remove_tenant_dir_all because this is already
         // a temporary path
-        if let Err(e) = std::fs::remove_dir_all(&tenant_dir_path) {
-            error!(
-                "Failed to remove temporary directory '{}': {:?}",
-                tenant_dir_path, e
-            );
-        }
-        return Ok(None);
+        std::fs::remove_dir_all(&tenant_dir_path).fatal_err("delete temporary tenant dir");
+        return None;
     }
 
     // This case happens if we crash during attachment before writing a config into the dir
     let is_empty = tenant_dir_path
         .is_empty_dir()
-        .with_context(|| format!("Failed to check whether {tenant_dir_path:?} is an empty dir"))?;
+        .fatal_err("Checking for empty tenant dir");
     if is_empty {
         info!("removing empty tenant directory {tenant_dir_path:?}");
-        if let Err(e) = std::fs::remove_dir(&tenant_dir_path) {
-            error!(
-                "Failed to remove empty tenant directory '{}': {e:#}",
-                tenant_dir_path
-            )
-        }
-        return Ok(None);
+        std::fs::remove_dir(&tenant_dir_path).fatal_err("delete empty tenant dir");
+        return None;
     }
 
-    let tenant_shard_id = match tenant_dir_path
-        .file_name()
-        .unwrap_or_default()
-        .parse::<TenantShardId>()
-    {
-        Ok(id) => id,
-        Err(_) => {
-            warn!("Invalid tenant path (garbage in our repo directory?): {tenant_dir_path}",);
-            return Ok(None);
-        }
-    };
-
-    Ok(Some((
-        tenant_shard_id,
-        Tenant::load_tenant_config(conf, &tenant_shard_id),
-    )))
+    Some(Tenant::load_tenant_config(conf, &tenant_shard_id))
 }
 
 /// Initial stage of load: walk the local tenants directory, clean up any temp files,
@@ -405,32 +382,51 @@ fn load_tenant_config(
 /// seconds even on reasonably fast drives.
 async fn init_load_tenant_configs(
     conf: &'static PageServerConf,
-) -> anyhow::Result<HashMap<TenantShardId, anyhow::Result<LocationConf>>> {
+) -> HashMap<TenantShardId, Result<LocationConf, LoadConfigError>> {
     let tenants_dir = conf.tenants_path();
 
-    let dentries = tokio::task::spawn_blocking(move || -> anyhow::Result<Vec<Utf8DirEntry>> {
-        let dir_entries = tenants_dir
-            .read_dir_utf8()
-            .with_context(|| format!("Failed to list tenants dir {tenants_dir:?}"))?;
+    let dentries = tokio::task::spawn_blocking(move || -> Vec<Utf8DirEntry> {
+        let context = format!("read tenants dir {tenants_dir}");
+        let dir_entries = tenants_dir.read_dir_utf8().fatal_err(&context);
 
-        Ok(dir_entries.collect::<Result<Vec<_>, std::io::Error>>()?)
+        dir_entries
+            .collect::<Result<Vec<_>, std::io::Error>>()
+            .fatal_err(&context)
     })
-    .await??;
+    .await
+    .expect("Config load task panicked");
 
     let mut configs = HashMap::new();
 
     let mut join_set = JoinSet::new();
     for dentry in dentries {
-        join_set.spawn_blocking(move || load_tenant_config(conf, dentry));
+        let tenant_shard_id = match dentry.file_name().parse::<TenantShardId>() {
+            Ok(id) => id,
+            Err(_) => {
+                warn!(
+                    "Invalid tenant path (garbage in our repo directory?): '{}'",
+                    dentry.file_name()
+                );
+                continue;
+            }
+        };
+
+        join_set.spawn_blocking(move || {
+            (
+                tenant_shard_id,
+                load_tenant_config(conf, tenant_shard_id, dentry),
+            )
+        });
     }
 
     while let Some(r) = join_set.join_next().await {
-        if let Some((tenant_id, tenant_config)) = r?? {
-            configs.insert(tenant_id, tenant_config);
+        let (tenant_shard_id, tenant_config) = r.expect("Panic in config load task");
+        if let Some(tenant_config) = tenant_config {
+            configs.insert(tenant_shard_id, tenant_config);
         }
     }
 
-    Ok(configs)
+    configs
 }
 
 #[derive(Debug, thiserror::Error)]
@@ -472,7 +468,7 @@ pub async fn init_tenant_mgr(
     );
 
     // Scan local filesystem for attached tenants
-    let tenant_configs = init_load_tenant_configs(conf).await?;
+    let tenant_configs = init_load_tenant_configs(conf).await;
 
     // Determine which tenants are to be secondary or attached, and in which generation
     let tenant_modes = init_load_generations(conf, &tenant_configs, &resources, &cancel).await?;
@@ -590,31 +586,23 @@ pub async fn init_tenant_mgr(
     );
     // For those shards that have live configurations, construct `Tenant` or `SecondaryTenant` objects and start them running
     for (tenant_shard_id, location_conf, config_write_result) in config_write_results {
-        // Errors writing configs are fatal
-        config_write_result?;
+        // Writing a config to local disk is foundational to startup up tenants: panic if we can't.
+        config_write_result.fatal_err("write tenant shard config file");
 
         let tenant_dir_path = conf.tenant_path(&tenant_shard_id);
         let shard_identity = location_conf.shard;
         let slot = match location_conf.mode {
-            LocationMode::Attached(attached_conf) => {
-                match tenant_spawn(
-                    conf,
-                    tenant_shard_id,
-                    &tenant_dir_path,
-                    resources.clone(),
-                    AttachedTenantConf::new(location_conf.tenant_conf, attached_conf),
-                    shard_identity,
-                    Some(init_order.clone()),
-                    SpawnMode::Lazy,
-                    &ctx,
-                ) {
-                    Ok(tenant) => TenantSlot::Attached(tenant),
-                    Err(e) => {
-                        error!(tenant_id=%tenant_shard_id.tenant_id, shard_id=%tenant_shard_id.shard_slug(), "Failed to start tenant: {e:#}");
-                        continue;
-                    }
-                }
-            }
+            LocationMode::Attached(attached_conf) => TenantSlot::Attached(tenant_spawn(
+                conf,
+                tenant_shard_id,
+                &tenant_dir_path,
+                resources.clone(),
+                AttachedTenantConf::new(location_conf.tenant_conf, attached_conf),
+                shard_identity,
+                Some(init_order.clone()),
+                SpawnMode::Lazy,
+                &ctx,
+            )),
             LocationMode::Secondary(secondary_conf) => {
                 info!(
                     tenant_id = %tenant_shard_id.tenant_id,
@@ -649,8 +637,7 @@ pub async fn init_tenant_mgr(
     })
 }
 
-/// Wrapper for Tenant::spawn that checks invariants before running, and inserts
-/// a broken tenant in the map if Tenant::spawn fails.
+/// Wrapper for Tenant::spawn that checks invariants before running
 #[allow(clippy::too_many_arguments)]
 fn tenant_spawn(
     conf: &'static PageServerConf,
@@ -662,23 +649,18 @@ fn tenant_spawn(
     init_order: Option<InitializationOrder>,
     mode: SpawnMode,
     ctx: &RequestContext,
-) -> anyhow::Result<Arc<Tenant>> {
-    anyhow::ensure!(
-        tenant_path.is_dir(),
-        "Cannot load tenant from path {tenant_path:?}, it either does not exist or not a directory"
-    );
-    anyhow::ensure!(
-        !crate::is_temporary(tenant_path),
-        "Cannot load tenant from temporary path {tenant_path:?}"
-    );
-    anyhow::ensure!(
-        !tenant_path.is_empty_dir().with_context(|| {
-            format!("Failed to check whether {tenant_path:?} is an empty dir")
-        })?,
-        "Cannot load tenant from empty directory {tenant_path:?}"
-    );
+) -> Arc<Tenant> {
+    // All these conditions should have been satisfied by our caller: the tenant dir exists, is a well formed
+    // path, and contains a configuration file.  Assertions that do synchronous I/O are limited to debug mode
+    // to avoid impacting prod runtime performance.
+    assert!(!crate::is_temporary(tenant_path));
+    debug_assert!(tenant_path.is_dir());
+    debug_assert!(conf
+        .tenant_location_config_path(&tenant_shard_id)
+        .try_exists()
+        .unwrap());
 
-    let tenant = Tenant::spawn(
+    Tenant::spawn(
         conf,
         tenant_shard_id,
         resources,
@@ -687,9 +669,7 @@ fn tenant_spawn(
         init_order,
         mode,
         ctx,
-    );
-
-    Ok(tenant)
+    )
 }
 
 async fn shutdown_all_tenants0(tenants: &std::sync::RwLock<TenantsMap>) {
@@ -840,8 +820,9 @@ pub(crate) enum UpsertLocationError {
     #[error("Failed to flush: {0}")]
     Flush(anyhow::Error),
 
+    /// This error variant is for unexpected situations (soft assertions) where the system is in an unexpected state.
     #[error("Internal error: {0}")]
-    Other(#[from] anyhow::Error),
+    InternalError(anyhow::Error),
 }
 
 impl TenantManager {
@@ -971,7 +952,8 @@ impl TenantManager {
         match fast_path_taken {
             Some(FastPathModified::Attached(tenant)) => {
                 Tenant::persist_tenant_config(self.conf, &tenant_shard_id, &new_location_config)
-                    .await?;
+                    .await
+                    .fatal_err("write tenant shard config");
 
                 // Transition to AttachedStale means we may well hold a valid generation
                 // still, and have been requested to go stale as part of a migration.  If
@@ -1001,7 +983,8 @@ impl TenantManager {
             }
             Some(FastPathModified::Secondary(_secondary_tenant)) => {
                 Tenant::persist_tenant_config(self.conf, &tenant_shard_id, &new_location_config)
-                    .await?;
+                    .await
+                    .fatal_err("write tenant shard config");
 
                 return Ok(None);
             }
@@ -1067,7 +1050,7 @@ impl TenantManager {
             Some(TenantSlot::InProgress(_)) => {
                 // This should never happen: acquire_slot should error out
                 // if the contents of a slot were InProgress.
-                return Err(UpsertLocationError::Other(anyhow::anyhow!(
+                return Err(UpsertLocationError::InternalError(anyhow::anyhow!(
                     "Acquired an InProgress slot, this is a bug."
                 )));
             }
@@ -1086,12 +1069,14 @@ impl TenantManager {
         // Does not need to be fsync'd because local storage is just a cache.
         tokio::fs::create_dir_all(&timelines_path)
             .await
-            .with_context(|| format!("Creating {timelines_path}"))?;
+            .fatal_err("create timelines/ dir");
 
         // Before activating either secondary or attached mode, persist the
         // configuration, so that on restart we will re-attach (or re-start
         // secondary) on the tenant.
-        Tenant::persist_tenant_config(self.conf, &tenant_shard_id, &new_location_config).await?;
+        Tenant::persist_tenant_config(self.conf, &tenant_shard_id, &new_location_config)
+            .await
+            .fatal_err("write tenant shard config");
 
         let new_slot = match &new_location_config.mode {
             LocationMode::Secondary(secondary_config) => {
@@ -1110,13 +1095,15 @@ impl TenantManager {
                 // from upserts.  This enables creating generation-less tenants even though neon_local
                 // always uses generations when calling the location conf API.
                 let attached_conf = if cfg!(feature = "testing") {
-                    let mut conf = AttachedTenantConf::try_from(new_location_config)?;
+                    let mut conf = AttachedTenantConf::try_from(new_location_config)
+                        .map_err(UpsertLocationError::BadRequest)?;
                     if self.conf.control_plane_api.is_none() {
                         conf.location.generation = Generation::none();
                     }
                     conf
                 } else {
-                    AttachedTenantConf::try_from(new_location_config)?
+                    AttachedTenantConf::try_from(new_location_config)
+                        .map_err(UpsertLocationError::BadRequest)?
                 };
 
                 let tenant = tenant_spawn(
@@ -1129,7 +1116,7 @@ impl TenantManager {
                     None,
                     spawn_mode,
                     ctx,
-                )?;
+                );
 
                 TenantSlot::Attached(tenant)
             }
@@ -1143,7 +1130,7 @@ impl TenantManager {
 
         match slot_guard.upsert(new_slot) {
             Err(TenantSlotUpsertError::InternalError(e)) => {
-                Err(UpsertLocationError::Other(anyhow::anyhow!(e)))
+                Err(UpsertLocationError::InternalError(anyhow::anyhow!(e)))
             }
             Err(TenantSlotUpsertError::MapState(e)) => Err(UpsertLocationError::Unavailable(e)),
             Err(TenantSlotUpsertError::ShuttingDown((new_slot, _completion))) => {
@@ -1250,7 +1237,7 @@ impl TenantManager {
             None,
             SpawnMode::Eager,
             ctx,
-        )?;
+        );
 
         slot_guard.upsert(TenantSlot::Attached(tenant))?;
 
@@ -1984,7 +1971,7 @@ impl TenantManager {
             None,
             SpawnMode::Eager,
             ctx,
-        )?;
+        );
 
         slot_guard.upsert(TenantSlot::Attached(tenant))?;
 

pageserver/src/tenant/remote_timeline_client.rs

@@ -519,7 +519,7 @@ impl RemoteTimelineClient {
         local_path: &Utf8Path,
         cancel: &CancellationToken,
         ctx: &RequestContext,
-    ) -> anyhow::Result<u64> {
+    ) -> Result<u64, DownloadError> {
         let downloaded_size = {
             let _unfinished_gauge_guard = self.metrics.call_begin(
                 &RemoteOpFileKind::Layer,

pageserver/src/tenant/secondary.rs

@@ -23,6 +23,8 @@ use super::{
     storage_layer::LayerName,
 };
 
+use crate::metrics::SECONDARY_RESIDENT_PHYSICAL_SIZE;
+use metrics::UIntGauge;
 use pageserver_api::{
     models,
     shard::{ShardIdentity, TenantShardId},
@@ -99,6 +101,17 @@ pub(crate) struct SecondaryTenant {
 
     // Public state indicating overall progress of downloads relative to the last heatmap seen
     pub(crate) progress: std::sync::Mutex<models::SecondaryProgress>,
+
+    // Sum of layer sizes on local disk
+    pub(super) resident_size_metric: UIntGauge,
+}
+
+impl Drop for SecondaryTenant {
+    fn drop(&mut self) {
+        let tenant_id = self.tenant_shard_id.tenant_id.to_string();
+        let shard_id = format!("{}", self.tenant_shard_id.shard_slug());
+        let _ = SECONDARY_RESIDENT_PHYSICAL_SIZE.remove_label_values(&[&tenant_id, &shard_id]);
+    }
 }
 
 impl SecondaryTenant {
@@ -108,6 +121,12 @@ impl SecondaryTenant {
         tenant_conf: TenantConfOpt,
         config: &SecondaryLocationConfig,
     ) -> Arc<Self> {
+        let tenant_id = tenant_shard_id.tenant_id.to_string();
+        let shard_id = format!("{}", tenant_shard_id.shard_slug());
+        let resident_size_metric = SECONDARY_RESIDENT_PHYSICAL_SIZE
+            .get_metric_with_label_values(&[&tenant_id, &shard_id])
+            .unwrap();
+
         Arc::new(Self {
             tenant_shard_id,
             // todo: shall we make this a descendent of the
@@ -123,6 +142,8 @@ impl SecondaryTenant {
             detail: std::sync::Mutex::new(SecondaryDetail::new(config.clone())),
 
             progress: std::sync::Mutex::default(),
+
+            resident_size_metric,
         })
     }
 
@@ -211,16 +232,12 @@ impl SecondaryTenant {
             // have to 100% match what is on disk, because it's a best-effort warming
             // of the cache.
             let mut detail = this.detail.lock().unwrap();
-            if let Some(timeline_detail) = detail.timelines.get_mut(&timeline_id) {
-                let removed = timeline_detail.on_disk_layers.remove(&name);
-
-                // We might race with removal of the same layer during downloads, if it was removed
-                // from the heatmap.  If we see that the OnDiskState is gone, then no need to
-                // do a physical deletion or store in evicted_at.
-                if let Some(removed) = removed {
-                    removed.remove_blocking();
-                    timeline_detail.evicted_at.insert(name, now);
-                }
+            if let Some(removed) =
+                detail.evict_layer(name, &timeline_id, now, &this.resident_size_metric)
+            {
+                // We might race with removal of the same layer during downloads, so finding the layer we
+                // were trying to remove is optional.  Only issue the disk I/O to remove it if we found it.
+                removed.remove_blocking();
             }
         })
         .await

pageserver/src/tenant/secondary/downloader.rs

@@ -46,6 +46,7 @@ use crate::tenant::{
 use camino::Utf8PathBuf;
 use chrono::format::{DelayedFormat, StrftimeItems};
 use futures::Future;
+use metrics::UIntGauge;
 use pageserver_api::models::SecondaryProgress;
 use pageserver_api::shard::TenantShardId;
 use remote_storage::{DownloadError, Etag, GenericRemoteStorage};
@@ -131,16 +132,66 @@ impl OnDiskState {
             .or_else(fs_ext::ignore_not_found)
             .fatal_err("Deleting secondary layer")
     }
+
+    pub(crate) fn file_size(&self) -> u64 {
+        self.metadata.file_size
+    }
 }
 
 #[derive(Debug, Clone, Default)]
 pub(super) struct SecondaryDetailTimeline {
-    pub(super) on_disk_layers: HashMap<LayerName, OnDiskState>,
+    on_disk_layers: HashMap<LayerName, OnDiskState>,
 
     /// We remember when layers were evicted, to prevent re-downloading them.
     pub(super) evicted_at: HashMap<LayerName, SystemTime>,
 }
 
+impl SecondaryDetailTimeline {
+    pub(super) fn remove_layer(
+        &mut self,
+        name: &LayerName,
+        resident_metric: &UIntGauge,
+    ) -> Option<OnDiskState> {
+        let removed = self.on_disk_layers.remove(name);
+        if let Some(removed) = &removed {
+            resident_metric.sub(removed.file_size());
+        }
+        removed
+    }
+
+    /// `local_path`
+    fn touch_layer<F>(
+        &mut self,
+        conf: &'static PageServerConf,
+        tenant_shard_id: &TenantShardId,
+        timeline_id: &TimelineId,
+        touched: &HeatMapLayer,
+        resident_metric: &UIntGauge,
+        local_path: F,
+    ) where
+        F: FnOnce() -> Utf8PathBuf,
+    {
+        use std::collections::hash_map::Entry;
+        match self.on_disk_layers.entry(touched.name.clone()) {
+            Entry::Occupied(mut v) => {
+                v.get_mut().access_time = touched.access_time;
+            }
+            Entry::Vacant(e) => {
+                e.insert(OnDiskState::new(
+                    conf,
+                    tenant_shard_id,
+                    timeline_id,
+                    touched.name.clone(),
+                    touched.metadata.clone(),
+                    touched.access_time,
+                    local_path(),
+                ));
+                resident_metric.add(touched.metadata.file_size);
+            }
+        }
+    }
+}
+
 // Aspects of a heatmap that we remember after downloading it
 #[derive(Clone, Debug)]
 struct DownloadSummary {
@@ -158,7 +209,7 @@ pub(super) struct SecondaryDetail {
 
     last_download: Option<DownloadSummary>,
     next_download: Option<Instant>,
-    pub(super) timelines: HashMap<TimelineId, SecondaryDetailTimeline>,
+    timelines: HashMap<TimelineId, SecondaryDetailTimeline>,
 }
 
 /// Helper for logging SystemTime
@@ -191,6 +242,38 @@ impl SecondaryDetail {
         }
     }
 
+    pub(super) fn evict_layer(
+        &mut self,
+        name: LayerName,
+        timeline_id: &TimelineId,
+        now: SystemTime,
+        resident_metric: &UIntGauge,
+    ) -> Option<OnDiskState> {
+        let timeline = self.timelines.get_mut(timeline_id)?;
+        let removed = timeline.remove_layer(&name, resident_metric);
+        if removed.is_some() {
+            timeline.evicted_at.insert(name, now);
+        }
+        removed
+    }
+
+    pub(super) fn remove_timeline(
+        &mut self,
+        timeline_id: &TimelineId,
+        resident_metric: &UIntGauge,
+    ) {
+        let removed = self.timelines.remove(timeline_id);
+        if let Some(removed) = removed {
+            resident_metric.sub(
+                removed
+                    .on_disk_layers
+                    .values()
+                    .map(|l| l.metadata.file_size)
+                    .sum(),
+            );
+        }
+    }
+
     /// Additionally returns the total number of layers, used for more stable relative access time
     /// based eviction.
     pub(super) fn get_layers_for_eviction(
@@ -601,8 +684,13 @@ impl<'a> TenantDownloader<'a> {
                 Some(t) => t,
                 None => {
                     // We have no existing state: need to scan local disk for layers first.
-                    let timeline_state =
-                        init_timeline_state(self.conf, tenant_shard_id, timeline).await;
+                    let timeline_state = init_timeline_state(
+                        self.conf,
+                        tenant_shard_id,
+                        timeline,
+                        &self.secondary_state.resident_size_metric,
+                    )
+                    .await;
 
                     // Re-acquire detail lock now that we're done with async load from local FS
                     self.secondary_state
@@ -671,6 +759,25 @@ impl<'a> TenantDownloader<'a> {
                 .await?;
         }
 
+        // Metrics consistency check in testing builds
+        if cfg!(feature = "testing") {
+            let detail = self.secondary_state.detail.lock().unwrap();
+            let resident_size = detail
+                .timelines
+                .values()
+                .map(|tl| {
+                    tl.on_disk_layers
+                        .values()
+                        .map(|v| v.metadata.file_size)
+                        .sum::<u64>()
+                })
+                .sum::<u64>();
+            assert_eq!(
+                resident_size,
+                self.secondary_state.resident_size_metric.get()
+            );
+        }
+
         // Only update last_etag after a full successful download: this way will not skip
         // the next download, even if the heatmap's actual etag is unchanged.
         self.secondary_state.detail.lock().unwrap().last_download = Some(DownloadSummary {
@@ -783,7 +890,7 @@ impl<'a> TenantDownloader<'a> {
             for delete_timeline in &delete_timelines {
                 // We haven't removed from disk yet, but optimistically remove from in-memory state: if removal
                 // from disk fails that will be a fatal error.
-                detail.timelines.remove(delete_timeline);
+                detail.remove_timeline(delete_timeline, &self.secondary_state.resident_size_metric);
             }
         }
 
@@ -801,7 +908,7 @@ impl<'a> TenantDownloader<'a> {
             let Some(timeline_state) = detail.timelines.get_mut(&timeline_id) else {
                 continue;
             };
-            timeline_state.on_disk_layers.remove(&layer_name);
+            timeline_state.remove_layer(&layer_name, &self.secondary_state.resident_size_metric);
         }
 
         for timeline_id in delete_timelines {
@@ -1000,33 +1107,24 @@ impl<'a> TenantDownloader<'a> {
             let timeline_detail = detail.timelines.entry(timeline_id).or_default();
 
             tracing::info!("Wrote timeline_detail for {} touched layers", touched.len());
-
-            for t in touched {
-                use std::collections::hash_map::Entry;
-                match timeline_detail.on_disk_layers.entry(t.name.clone()) {
-                    Entry::Occupied(mut v) => {
-                        v.get_mut().access_time = t.access_time;
-                    }
-                    Entry::Vacant(e) => {
-                        let local_path = local_layer_path(
+            touched.into_iter().for_each(|t| {
+                timeline_detail.touch_layer(
+                    self.conf,
+                    tenant_shard_id,
+                    &timeline_id,
+                    &t,
+                    &self.secondary_state.resident_size_metric,
+                    || {
+                        local_layer_path(
                             self.conf,
                             tenant_shard_id,
                             &timeline_id,
                             &t.name,
                             &t.metadata.generation,
-                        );
-                        e.insert(OnDiskState::new(
-                            self.conf,
-                            tenant_shard_id,
-                            &timeline_id,
-                            t.name,
-                            t.metadata.clone(),
-                            t.access_time,
-                            local_path,
-                        ));
-                    }
-                }
-            }
+                        )
+                    },
+                )
+            });
         }
 
         result
@@ -1135,6 +1233,7 @@ async fn init_timeline_state(
     conf: &'static PageServerConf,
     tenant_shard_id: &TenantShardId,
     heatmap: &HeatMapTimeline,
+    resident_metric: &UIntGauge,
 ) -> SecondaryDetailTimeline {
     let timeline_path = conf.timeline_path(tenant_shard_id, &heatmap.timeline_id);
     let mut detail = SecondaryDetailTimeline::default();
@@ -1210,17 +1309,13 @@ async fn init_timeline_state(
                         } else {
                             // We expect the access time to be initialized immediately afterwards, when
                             // the latest heatmap is applied to the state.
-                            detail.on_disk_layers.insert(
-                                name.clone(),
-                                OnDiskState::new(
-                                    conf,
-                                    tenant_shard_id,
-                                    &heatmap.timeline_id,
-                                    name,
-                                    remote_meta.metadata.clone(),
-                                    remote_meta.access_time,
-                                    file_path,
-                                ),
+                            detail.touch_layer(
+                                conf,
+                                tenant_shard_id,
+                                &heatmap.timeline_id,
+                                remote_meta,
+                                resident_metric,
+                                || file_path,
                             );
                         }
                     }

pageserver/src/tenant/size.rs

@@ -3,6 +3,7 @@ use std::collections::hash_map::Entry;
 use std::collections::{HashMap, HashSet};
 use std::sync::Arc;
 
+use tenant_size_model::svg::SvgBranchKind;
 use tokio::sync::oneshot::error::RecvError;
 use tokio::sync::Semaphore;
 use tokio_util::sync::CancellationToken;
@@ -87,6 +88,9 @@ impl SegmentMeta {
             LsnKind::BranchPoint => true,
             LsnKind::GcCutOff => true,
             LsnKind::BranchEnd => false,
+            LsnKind::LeasePoint => true,
+            LsnKind::LeaseStart => false,
+            LsnKind::LeaseEnd => false,
         }
     }
 }
@@ -103,6 +107,21 @@ pub enum LsnKind {
     GcCutOff,
     /// Last record LSN
     BranchEnd,
+    /// A LSN lease is granted here.
+    LeasePoint,
+    /// A lease starts from here.
+    LeaseStart,
+    /// Last record LSN for the lease (should have the same LSN as the previous [`LsnKind::LeaseStart`]).
+    LeaseEnd,
+}
+
+impl From<LsnKind> for SvgBranchKind {
+    fn from(kind: LsnKind) -> Self {
+        match kind {
+            LsnKind::LeasePoint | LsnKind::LeaseStart | LsnKind::LeaseEnd => SvgBranchKind::Lease,
+            _ => SvgBranchKind::Timeline,
+        }
+    }
 }
 
 /// Collect all relevant LSNs to the inputs. These will only be helpful in the serialized form as
@@ -124,6 +143,9 @@ pub struct TimelineInputs {
 
     /// Cutoff point calculated from the user-supplied 'max_retention_period'
     retention_param_cutoff: Option<Lsn>,
+
+    /// Lease points on the timeline
+    lease_points: Vec<Lsn>,
 }
 
 /// Gathers the inputs for the tenant sizing model.
@@ -234,6 +256,13 @@ pub(super) async fn gather_inputs(
             None
         };
 
+        let lease_points = gc_info
+            .leases
+            .keys()
+            .filter(|&&lsn| lsn > ancestor_lsn)
+            .copied()
+            .collect::<Vec<_>>();
+
         // next_gc_cutoff in parent branch are not of interest (right now at least), nor do we
         // want to query any logical size before initdb_lsn.
         let branch_start_lsn = cmp::max(ancestor_lsn, timeline.initdb_lsn);
@@ -248,6 +277,8 @@ pub(super) async fn gather_inputs(
             .map(|lsn| (lsn, LsnKind::BranchPoint))
             .collect::<Vec<_>>();
 
+        lsns.extend(lease_points.iter().map(|&lsn| (lsn, LsnKind::LeasePoint)));
+
         drop(gc_info);
 
         // Add branch points we collected earlier, just in case there were any that were
@@ -296,6 +327,7 @@ pub(super) async fn gather_inputs(
             if kind == LsnKind::BranchPoint {
                 branchpoint_segments.insert((timeline_id, lsn), segments.len());
             }
+
             segments.push(SegmentMeta {
                 segment: Segment {
                     parent: Some(parent),
@@ -306,7 +338,45 @@ pub(super) async fn gather_inputs(
                 timeline_id: timeline.timeline_id,
                 kind,
             });
-            parent += 1;
+
+            parent = segments.len() - 1;
+
+            if kind == LsnKind::LeasePoint {
+                // Needs `LeaseStart` and `LeaseEnd` as well to model lease as a read-only branch that never writes data
+                // (i.e. it's lsn has not advanced from ancestor_lsn), and therefore the three segments have the same LSN
+                // value. Without the other two segments, the calculation code would not count the leased LSN as a point
+                // to be retained.
+                // Did not use `BranchStart` or `BranchEnd` so we can differentiate branches and leases during debug.
+                //
+                // Alt Design: rewrite the entire calculation code to be independent of timeline id. Both leases and
+                // branch points can be given a synthetic id so we can unite them.
+                let mut lease_parent = parent;
+
+                // Start of a lease.
+                segments.push(SegmentMeta {
+                    segment: Segment {
+                        parent: Some(lease_parent),
+                        lsn: lsn.0,
+                        size: None,                   // Filled in later, if necessary
+                        needed: lsn > next_gc_cutoff, // only needed if the point is within rentention.
+                    },
+                    timeline_id: timeline.timeline_id,
+                    kind: LsnKind::LeaseStart,
+                });
+                lease_parent += 1;
+
+                // End of the lease.
+                segments.push(SegmentMeta {
+                    segment: Segment {
+                        parent: Some(lease_parent),
+                        lsn: lsn.0,
+                        size: None,   // Filled in later, if necessary
+                        needed: true, // everything at the lease LSN must be readable => is needed
+                    },
+                    timeline_id: timeline.timeline_id,
+                    kind: LsnKind::LeaseEnd,
+                });
+            }
         }
 
         // Current end of the timeline
@@ -332,6 +402,7 @@ pub(super) async fn gather_inputs(
             pitr_cutoff,
             next_gc_cutoff,
             retention_param_cutoff,
+            lease_points,
         });
     }
 
@@ -674,7 +745,8 @@ fn verify_size_for_multiple_branches() {
       "horizon_cutoff": "0/2210CD0",
       "pitr_cutoff": "0/2210CD0",
       "next_gc_cutoff": "0/2210CD0",
-      "retention_param_cutoff": null
+      "retention_param_cutoff": null,
+      "lease_points": []
     },
     {
       "timeline_id": "454626700469f0a9914949b9d018e876",
@@ -684,7 +756,8 @@ fn verify_size_for_multiple_branches() {
       "horizon_cutoff": "0/1817770",
       "pitr_cutoff": "0/1817770",
       "next_gc_cutoff": "0/1817770",
-      "retention_param_cutoff": null
+      "retention_param_cutoff": null,
+      "lease_points": []
     },
     {
       "timeline_id": "cb5e3cbe60a4afc00d01880e1a37047f",
@@ -694,7 +767,8 @@ fn verify_size_for_multiple_branches() {
       "horizon_cutoff": "0/18B3D98",
       "pitr_cutoff": "0/18B3D98",
       "next_gc_cutoff": "0/18B3D98",
-      "retention_param_cutoff": null
+      "retention_param_cutoff": null,
+      "lease_points": []
     }
   ]
 }
@@ -749,7 +823,8 @@ fn verify_size_for_one_branch() {
       "horizon_cutoff": "47/240A5860",
       "pitr_cutoff": "47/240A5860",
       "next_gc_cutoff": "47/240A5860",
-      "retention_param_cutoff": "0/0"
+      "retention_param_cutoff": "0/0",
+      "lease_points": []
     }
   ]
 }"#;

pageserver/src/tenant/storage_layer/delta_layer.rs

@@ -49,7 +49,7 @@ use camino::{Utf8Path, Utf8PathBuf};
 use futures::StreamExt;
 use itertools::Itertools;
 use pageserver_api::keyspace::KeySpace;
-use pageserver_api::models::LayerAccessKind;
+use pageserver_api::models::{ImageCompressionAlgorithm, LayerAccessKind};
 use pageserver_api::shard::TenantShardId;
 use rand::{distributions::Alphanumeric, Rng};
 use serde::{Deserialize, Serialize};
@@ -452,7 +452,12 @@ impl DeltaLayerWriterInner {
         ctx: &RequestContext,
     ) -> (Vec<u8>, anyhow::Result<()>) {
         assert!(self.lsn_range.start <= lsn);
-        let (val, res) = self.blob_writer.write_blob(val, ctx).await;
+        // We don't want to use compression in delta layer creation
+        let compression = ImageCompressionAlgorithm::DisabledNoDecompress;
+        let (val, res) = self
+            .blob_writer
+            .write_blob_maybe_compressed(val, ctx, compression)
+            .await;
         let off = match res {
             Ok(off) => off,
             Err(e) => return (val, Err(anyhow::anyhow!(e))),

pageserver/src/tenant/storage_layer/image_layer.rs

@@ -165,6 +165,7 @@ pub struct ImageLayerInner {
     file_id: FileId,
 
     max_vectored_read_bytes: Option<MaxVectoredReadBytes>,
+    compressed_reads: bool,
 }
 
 impl std::fmt::Debug for ImageLayerInner {
@@ -178,7 +179,8 @@ impl std::fmt::Debug for ImageLayerInner {
 
 impl ImageLayerInner {
     pub(super) async fn dump(&self, ctx: &RequestContext) -> anyhow::Result<()> {
-        let block_reader = FileBlockReader::new(&self.file, self.file_id);
+        let block_reader =
+            FileBlockReader::new_with_compression(&self.file, self.file_id, self.compressed_reads);
         let tree_reader = DiskBtreeReader::<_, KEY_SIZE>::new(
             self.index_start_blk,
             self.index_root_blk,
@@ -266,9 +268,10 @@ impl ImageLayer {
     async fn load_inner(&self, ctx: &RequestContext) -> Result<ImageLayerInner> {
         let path = self.path();
 
-        let loaded = ImageLayerInner::load(&path, self.desc.image_layer_lsn(), None, None, ctx)
-            .await
-            .and_then(|res| res)?;
+        let loaded =
+            ImageLayerInner::load(&path, self.desc.image_layer_lsn(), None, None, false, ctx)
+                .await
+                .and_then(|res| res)?;
 
         // not production code
         let actual_layer_name = LayerName::from_str(path.file_name().unwrap()).unwrap();
@@ -377,6 +380,7 @@ impl ImageLayerInner {
         lsn: Lsn,
         summary: Option<Summary>,
         max_vectored_read_bytes: Option<MaxVectoredReadBytes>,
+        support_compressed_reads: bool,
         ctx: &RequestContext,
     ) -> Result<Result<Self, anyhow::Error>, anyhow::Error> {
         let file = match VirtualFile::open(path, ctx).await {
@@ -420,6 +424,7 @@ impl ImageLayerInner {
             file,
             file_id,
             max_vectored_read_bytes,
+            compressed_reads: support_compressed_reads,
             key_range: actual_summary.key_range,
         }))
     }
@@ -430,7 +435,8 @@ impl ImageLayerInner {
         reconstruct_state: &mut ValueReconstructState,
         ctx: &RequestContext,
     ) -> anyhow::Result<ValueReconstructResult> {
-        let block_reader = FileBlockReader::new(&self.file, self.file_id);
+        let block_reader =
+            FileBlockReader::new_with_compression(&self.file, self.file_id, self.compressed_reads);
         let tree_reader =
             DiskBtreeReader::new(self.index_start_blk, self.index_root_blk, &block_reader);
 
@@ -490,12 +496,14 @@ impl ImageLayerInner {
         &self,
         ctx: &RequestContext,
     ) -> anyhow::Result<Vec<(Key, Lsn, Value)>> {
-        let block_reader = FileBlockReader::new(&self.file, self.file_id);
+        let block_reader =
+            FileBlockReader::new_with_compression(&self.file, self.file_id, self.compressed_reads);
         let tree_reader =
             DiskBtreeReader::new(self.index_start_blk, self.index_root_blk, &block_reader);
         let mut result = Vec::new();
         let mut stream = Box::pin(tree_reader.into_stream(&[0; KEY_SIZE], ctx));
-        let block_reader = FileBlockReader::new(&self.file, self.file_id);
+        let block_reader =
+            FileBlockReader::new_with_compression(&self.file, self.file_id, self.compressed_reads);
         let cursor = block_reader.block_cursor();
         while let Some(item) = stream.next().await {
             // TODO: dedup code with get_reconstruct_value
@@ -530,7 +538,8 @@ impl ImageLayerInner {
                 .into(),
         );
 
-        let block_reader = FileBlockReader::new(&self.file, self.file_id);
+        let block_reader =
+            FileBlockReader::new_with_compression(&self.file, self.file_id, self.compressed_reads);
         let tree_reader =
             DiskBtreeReader::new(self.index_start_blk, self.index_root_blk, block_reader);
 
@@ -691,7 +700,8 @@ impl ImageLayerInner {
 
     #[cfg(test)]
     pub(crate) fn iter<'a>(&'a self, ctx: &'a RequestContext) -> ImageLayerIterator<'a> {
-        let block_reader = FileBlockReader::new(&self.file, self.file_id);
+        let block_reader =
+            FileBlockReader::new_with_compression(&self.file, self.file_id, self.compressed_reads);
         let tree_reader =
             DiskBtreeReader::new(self.index_start_blk, self.index_root_blk, block_reader);
         ImageLayerIterator {

pageserver/src/tenant/storage_layer/inmemory_layer.rs

@@ -6,13 +6,14 @@
 //!
 use crate::config::PageServerConf;
 use crate::context::{PageContentKind, RequestContext, RequestContextBuilder};
+use crate::page_cache::PAGE_SZ;
 use crate::repository::{Key, Value};
-use crate::tenant::block_io::BlockReader;
+use crate::tenant::block_io::{BlockCursor, BlockReader, BlockReaderRef};
 use crate::tenant::ephemeral_file::EphemeralFile;
 use crate::tenant::storage_layer::ValueReconstructResult;
 use crate::tenant::timeline::GetVectoredError;
 use crate::tenant::{PageReconstructError, Timeline};
-use crate::{page_cache, walrecord};
+use crate::{l0_flush, page_cache, walrecord};
 use anyhow::{anyhow, ensure, Result};
 use pageserver_api::keyspace::KeySpace;
 use pageserver_api::models::InMemoryLayerInfo;
@@ -410,6 +411,7 @@ impl InMemoryLayer {
                 continue;
             }
 
+            // TODO: this uses the page cache => https://github.com/neondatabase/neon/issues/8183
             let buf = reader.read_blob(block_read.block_offset, &ctx).await;
             if let Err(e) = buf {
                 reconstruct_state
@@ -620,6 +622,13 @@ impl InMemoryLayer {
         // rare though, so we just accept the potential latency hit for now.
         let inner = self.inner.read().await;
 
+        let l0_flush_global_state = timeline.l0_flush_global_state.inner().clone();
+        use l0_flush::Inner;
+        let _concurrency_permit = match &*l0_flush_global_state {
+            Inner::PageCached => None,
+            Inner::Direct { semaphore, .. } => Some(semaphore.acquire().await),
+        };
+
         let end_lsn = *self.end_lsn.get().unwrap();
 
         let key_count = if let Some(key_range) = key_range {
@@ -645,28 +654,77 @@ impl InMemoryLayer {
         )
         .await?;
 
-        let mut buf = Vec::new();
+        match &*l0_flush_global_state {
+            l0_flush::Inner::PageCached => {
+                let ctx = RequestContextBuilder::extend(ctx)
+                    .page_content_kind(PageContentKind::InMemoryLayer)
+                    .build();
 
-        let cursor = inner.file.block_cursor();
+                let mut buf = Vec::new();
 
-        let ctx = RequestContextBuilder::extend(ctx)
-            .page_content_kind(PageContentKind::InMemoryLayer)
-            .build();
-        for (key, vec_map) in inner.index.iter() {
-            // Write all page versions
-            for (lsn, pos) in vec_map.as_slice() {
-                cursor.read_blob_into_buf(*pos, &mut buf, &ctx).await?;
-                let will_init = Value::des(&buf)?.will_init();
-                let res;
-                (buf, res) = delta_layer_writer
-                    .put_value_bytes(*key, *lsn, buf, will_init, &ctx)
-                    .await;
-                res?;
+                let cursor = inner.file.block_cursor();
+
+                for (key, vec_map) in inner.index.iter() {
+                    // Write all page versions
+                    for (lsn, pos) in vec_map.as_slice() {
+                        cursor.read_blob_into_buf(*pos, &mut buf, &ctx).await?;
+                        let will_init = Value::des(&buf)?.will_init();
+                        let res;
+                        (buf, res) = delta_layer_writer
+                            .put_value_bytes(*key, *lsn, buf, will_init, &ctx)
+                            .await;
+                        res?;
+                    }
+                }
+            }
+            l0_flush::Inner::Direct { .. } => {
+                let file_contents: Vec<u8> = inner.file.load_to_vec(ctx).await?;
+                assert_eq!(
+                    file_contents.len() % PAGE_SZ,
+                    0,
+                    "needed by BlockReaderRef::Slice"
+                );
+                assert_eq!(file_contents.len(), {
+                    let written = usize::try_from(inner.file.len()).unwrap();
+                    if written % PAGE_SZ == 0 {
+                        written
+                    } else {
+                        written.checked_add(PAGE_SZ - (written % PAGE_SZ)).unwrap()
+                    }
+                });
+
+                let cursor = BlockCursor::new(BlockReaderRef::Slice(&file_contents));
+
+                let mut buf = Vec::new();
+
+                for (key, vec_map) in inner.index.iter() {
+                    // Write all page versions
+                    for (lsn, pos) in vec_map.as_slice() {
+                        // TODO: once we have blob lengths in the in-memory index, we can
+                        // 1. get rid of the blob_io / BlockReaderRef::Slice business and
+                        // 2. load the file contents into a Bytes and
+                        // 3. the use `Bytes::slice` to get the `buf` that is our blob
+                        // 4. pass that `buf` into `put_value_bytes`
+                        // => https://github.com/neondatabase/neon/issues/8183
+                        cursor.read_blob_into_buf(*pos, &mut buf, ctx).await?;
+                        let will_init = Value::des(&buf)?.will_init();
+                        let res;
+                        (buf, res) = delta_layer_writer
+                            .put_value_bytes(*key, *lsn, buf, will_init, ctx)
+                            .await;
+                        res?;
+                    }
+                }
+
+                // Hold the permit until the IO is done; if we didn't, one could drop this future,
+                // thereby releasing the permit, but the Vec<u8> remains allocated until the IO completes.
+                // => we'd have more concurrenct Vec<u8> than allowed as per the semaphore.
+                drop(_concurrency_permit);
             }
         }
 
         // MAX is used here because we identify L0 layers by full key range
-        let delta_layer = delta_layer_writer.finish(Key::MAX, timeline, &ctx).await?;
+        let delta_layer = delta_layer_writer.finish(Key::MAX, timeline, ctx).await?;
         Ok(Some(delta_layer))
     }
 }

pageserver/src/tenant/storage_layer/layer.rs

@@ -1096,19 +1096,10 @@ impl LayerInner {
 
         match rx.await {
             Ok(Ok(res)) => Ok(res),
-            Ok(Err(e)) => {
-                // sleep already happened in the spawned task, if it was not cancelled
-                match e.downcast_ref::<remote_storage::DownloadError>() {
-                    // If the download failed due to its cancellation token,
-                    // propagate the cancellation error upstream.
-                    Some(remote_storage::DownloadError::Cancelled) => {
-                        Err(DownloadError::DownloadCancelled)
-                    }
-                    // FIXME: this is not embedding the error because historically it would had
-                    // been output to compute, however that is no longer the case.
-                    _ => Err(DownloadError::DownloadFailed),
-                }
+            Ok(Err(remote_storage::DownloadError::Cancelled)) => {
+                Err(DownloadError::DownloadCancelled)
             }
+            Ok(Err(_)) => Err(DownloadError::DownloadFailed),
             Err(_gone) => Err(DownloadError::DownloadCancelled),
         }
     }
@@ -1118,7 +1109,7 @@ impl LayerInner {
         timeline: Arc<Timeline>,
         permit: heavier_once_cell::InitPermit,
         ctx: &RequestContext,
-    ) -> anyhow::Result<Arc<DownloadedLayer>> {
+    ) -> Result<Arc<DownloadedLayer>, remote_storage::DownloadError> {
         let result = timeline
             .remote_client
             .download_layer_file(
@@ -1694,6 +1685,7 @@ impl DownloadedLayer {
                     lsn,
                     summary,
                     Some(owner.conf.max_vectored_read_bytes),
+                    owner.conf.image_compression.allow_decompression(),
                     ctx,
                 )
                 .await

pageserver/src/tenant/timeline.rs

@@ -14,6 +14,7 @@ use anyhow::{anyhow, bail, ensure, Context, Result};
 use arc_swap::ArcSwap;
 use bytes::Bytes;
 use camino::Utf8Path;
+use chrono::{DateTime, Utc};
 use enumset::EnumSet;
 use fail::fail_point;
 use once_cell::sync::Lazy;
@@ -65,7 +66,6 @@ use std::{
     ops::{Deref, Range},
 };
 
-use crate::metrics::GetKind;
 use crate::pgdatadir_mapping::MAX_AUX_FILE_V2_DELTAS;
 use crate::{
     aux_file::AuxFileSizeEstimator,
@@ -90,6 +90,10 @@ use crate::{
 use crate::{
     disk_usage_eviction_task::EvictionCandidate, tenant::storage_layer::delta_layer::DeltaEntry,
 };
+use crate::{
+    l0_flush::{self, L0FlushGlobalState},
+    metrics::GetKind,
+};
 use crate::{
     metrics::ScanLatencyOngoingRecording, tenant::timeline::logical_size::CurrentLogicalSize,
 };
@@ -208,6 +212,7 @@ pub struct TimelineResources {
     pub timeline_get_throttle: Arc<
         crate::tenant::throttle::Throttle<&'static crate::metrics::tenant_throttling::TimelineGet>,
     >,
+    pub l0_flush_global_state: l0_flush::L0FlushGlobalState,
 }
 
 pub(crate) struct AuxFilesState {
@@ -360,6 +365,7 @@ pub struct Timeline {
     repartition_threshold: u64,
 
     last_image_layer_creation_check_at: AtomicLsn,
+    last_image_layer_creation_check_instant: std::sync::Mutex<Option<Instant>>,
 
     /// Current logical size of the "datadir", at the last LSN.
     current_logical_size: LogicalSize,
@@ -433,6 +439,8 @@ pub struct Timeline {
     /// in the future, add `extra_test_sparse_keyspace` if necessary.
     #[cfg(test)]
     pub(crate) extra_test_dense_keyspace: ArcSwap<KeySpace>,
+
+    pub(crate) l0_flush_global_state: L0FlushGlobalState,
 }
 
 pub struct WalReceiverInfo {
@@ -457,6 +465,9 @@ pub(crate) struct GcInfo {
 
     /// Leases granted to particular LSNs.
     pub(crate) leases: BTreeMap<Lsn, LsnLease>,
+
+    /// Whether our branch point is within our ancestor's PITR interval (for cost estimation)
+    pub(crate) within_ancestor_pitr: bool,
 }
 
 impl GcInfo {
@@ -845,6 +856,18 @@ impl Timeline {
             .map(|ancestor| ancestor.timeline_id)
     }
 
+    /// Get the bytes written since the PITR cutoff on this branch, and
+    /// whether this branch's ancestor_lsn is within its parent's PITR.
+    pub(crate) fn get_pitr_history_stats(&self) -> (u64, bool) {
+        let gc_info = self.gc_info.read().unwrap();
+        let history = self
+            .get_last_record_lsn()
+            .checked_sub(gc_info.cutoffs.pitr)
+            .unwrap_or(Lsn(0))
+            .0;
+        (history, gc_info.within_ancestor_pitr)
+    }
+
     /// Lock and get timeline's GC cutoff
     pub(crate) fn get_latest_gc_cutoff_lsn(&self) -> RcuReadGuard<Lsn> {
         self.latest_gc_cutoff_lsn.read()
@@ -996,6 +1019,7 @@ impl Timeline {
     }
 
     pub(crate) const MAX_GET_VECTORED_KEYS: u64 = 32;
+    pub(crate) const VEC_GET_LAYERS_VISITED_WARN_THRESH: f64 = 512.0;
 
     /// Look up multiple page versions at a given LSN
     ///
@@ -1228,7 +1252,7 @@ impl Timeline {
         let get_data_timer = crate::metrics::GET_RECONSTRUCT_DATA_TIME
             .for_get_kind(get_kind)
             .start_timer();
-        self.get_vectored_reconstruct_data(keyspace, lsn, reconstruct_state, ctx)
+        self.get_vectored_reconstruct_data(keyspace.clone(), lsn, reconstruct_state, ctx)
             .await?;
         get_data_timer.stop_and_record();
 
@@ -1258,11 +1282,25 @@ impl Timeline {
         // (this is a requirement, not a bug). Skip updating the metric in these cases
         // to avoid infinite results.
         if !results.is_empty() {
+            let avg = layers_visited as f64 / results.len() as f64;
+            if avg >= Self::VEC_GET_LAYERS_VISITED_WARN_THRESH {
+                use utils::rate_limit::RateLimit;
+                static LOGGED: Lazy<Mutex<RateLimit>> =
+                    Lazy::new(|| Mutex::new(RateLimit::new(Duration::from_secs(60))));
+                let mut rate_limit = LOGGED.lock().unwrap();
+                rate_limit.call(|| {
+                    tracing::info!(
+                      shard_id = %self.tenant_shard_id.shard_slug(),
+                      lsn = %lsn,
+                      "Vectored read for {} visited {} layers on average per key and {} in total. {}/{} pages were returned",
+                      keyspace, avg, layers_visited, results.len(), keyspace.total_raw_size());
+                });
+            }
+
             // Note that this is an approximation. Tracking the exact number of layers visited
             // per key requires virtually unbounded memory usage and is inefficient
             // (i.e. segment tree tracking each range queried from a layer)
-            crate::metrics::VEC_READ_NUM_LAYERS_VISITED
-                .observe(layers_visited as f64 / results.len() as f64);
+            crate::metrics::VEC_READ_NUM_LAYERS_VISITED.observe(avg);
         }
 
         Ok(results)
@@ -1554,7 +1592,13 @@ impl Timeline {
                     let existing_lease = occupied.get_mut();
                     if valid_until > existing_lease.valid_until {
                         existing_lease.valid_until = valid_until;
+                        let dt: DateTime<Utc> = valid_until.into();
+                        info!("lease extended to {}", dt);
+                    } else {
+                        let dt: DateTime<Utc> = existing_lease.valid_until.into();
+                        info!("existing lease covers greater length, valid until {}", dt);
                     }
+
                     existing_lease.clone()
                 } else {
                     // Reject already GC-ed LSN (lsn < latest_gc_cutoff)
@@ -1563,6 +1607,8 @@ impl Timeline {
                         bail!("tried to request a page version that was garbage collected. requested at {} gc cutoff {}", lsn, *latest_gc_cutoff_lsn);
                     }
 
+                    let dt: DateTime<Utc> = valid_until.into();
+                    info!("lease created, valid until {}", dt);
                     entry.or_insert(LsnLease { valid_until }).clone()
                 }
             };
@@ -2339,6 +2385,7 @@ impl Timeline {
                 )),
                 repartition_threshold: 0,
                 last_image_layer_creation_check_at: AtomicLsn::new(0),
+                last_image_layer_creation_check_instant: Mutex::new(None),
 
                 last_received_wal: Mutex::new(None),
                 rel_size_cache: RwLock::new(RelSizeCache {
@@ -2376,6 +2423,8 @@ impl Timeline {
 
                 #[cfg(test)]
                 extra_test_dense_keyspace: ArcSwap::new(Arc::new(KeySpace::default())),
+
+                l0_flush_global_state: resources.l0_flush_global_state,
             };
             result.repartition_threshold =
                 result.get_checkpoint_distance() / REPARTITION_FREQ_IN_CHECKPOINT_DISTANCE;
@@ -4417,6 +4466,58 @@ impl Timeline {
         }
     }
 
+    /// Predicate function which indicates whether we should check if new image layers
+    /// are required. Since checking if new image layers are required is expensive in
+    /// terms of CPU, we only do it in the following cases:
+    /// 1. If the timeline has ingested sufficient WAL to justify the cost
+    /// 2. If enough time has passed since the last check
+    /// 2.1. For large tenants, we wish to perform the check more often since they
+    /// suffer from the lack of image layers
+    /// 2.2. For small tenants (that can mostly fit in RAM), we use a much longer interval
+    fn should_check_if_image_layers_required(self: &Arc<Timeline>, lsn: Lsn) -> bool {
+        const LARGE_TENANT_THRESHOLD: u64 = 2 * 1024 * 1024 * 1024;
+
+        let last_checks_at = self.last_image_layer_creation_check_at.load();
+        let distance = lsn
+            .checked_sub(last_checks_at)
+            .expect("Attempt to compact with LSN going backwards");
+        let min_distance =
+            self.get_image_layer_creation_check_threshold() as u64 * self.get_checkpoint_distance();
+
+        let distance_based_decision = distance.0 >= min_distance;
+
+        let mut time_based_decision = false;
+        let mut last_check_instant = self.last_image_layer_creation_check_instant.lock().unwrap();
+        if let CurrentLogicalSize::Exact(logical_size) = self.current_logical_size.current_size() {
+            let check_required_after = if Into::<u64>::into(&logical_size) >= LARGE_TENANT_THRESHOLD
+            {
+                self.get_checkpoint_timeout()
+            } else {
+                Duration::from_secs(3600 * 48)
+            };
+
+            time_based_decision = match *last_check_instant {
+                Some(last_check) => {
+                    let elapsed = last_check.elapsed();
+                    elapsed >= check_required_after
+                }
+                None => true,
+            };
+        }
+
+        // Do the expensive delta layer counting only if this timeline has ingested sufficient
+        // WAL since the last check or a checkpoint timeout interval has elapsed since the last
+        // check.
+        let decision = distance_based_decision || time_based_decision;
+
+        if decision {
+            self.last_image_layer_creation_check_at.store(lsn);
+            *last_check_instant = Some(Instant::now());
+        }
+
+        decision
+    }
+
     #[tracing::instrument(skip_all, fields(%lsn, %mode))]
     async fn create_image_layers(
         self: &Arc<Timeline>,
@@ -4439,22 +4540,7 @@ impl Timeline {
         // image layers  <100000000..100000099> and <200000000..200000199> are not completely covering it.
         let mut start = Key::MIN;
 
-        let check_for_image_layers = {
-            let last_checks_at = self.last_image_layer_creation_check_at.load();
-            let distance = lsn
-                .checked_sub(last_checks_at)
-                .expect("Attempt to compact with LSN going backwards");
-            let min_distance = self.get_image_layer_creation_check_threshold() as u64
-                * self.get_checkpoint_distance();
-
-            // Skip the expensive delta layer counting if this timeline has not ingested sufficient
-            // WAL since the last check.
-            distance.0 >= min_distance
-        };
-
-        if check_for_image_layers {
-            self.last_image_layer_creation_check_at.store(lsn);
-        }
+        let check_for_image_layers = self.should_check_if_image_layers_required(lsn);
 
         for partition in partitioning.parts.iter() {
             let img_range = start..partition.ranges.last().unwrap().end;
@@ -4711,6 +4797,42 @@ impl DurationRecorder {
     }
 }
 
+/// Descriptor for a delta layer used in testing infra. The start/end key/lsn range of the
+/// delta layer might be different from the min/max key/lsn in the delta layer. Therefore,
+/// the layer descriptor requires the user to provide the ranges, which should cover all
+/// keys specified in the `data` field.
+#[cfg(test)]
+pub struct DeltaLayerTestDesc {
+    pub lsn_range: Range<Lsn>,
+    pub key_range: Range<Key>,
+    pub data: Vec<(Key, Lsn, Value)>,
+}
+
+#[cfg(test)]
+impl DeltaLayerTestDesc {
+    #[allow(dead_code)]
+    pub fn new(lsn_range: Range<Lsn>, key_range: Range<Key>, data: Vec<(Key, Lsn, Value)>) -> Self {
+        Self {
+            lsn_range,
+            key_range,
+            data,
+        }
+    }
+
+    pub fn new_with_inferred_key_range(
+        lsn_range: Range<Lsn>,
+        data: Vec<(Key, Lsn, Value)>,
+    ) -> Self {
+        let key_min = data.iter().map(|(key, _, _)| key).min().unwrap();
+        let key_max = data.iter().map(|(key, _, _)| key).max().unwrap();
+        Self {
+            key_range: (*key_min)..(key_max.next()),
+            lsn_range,
+            data,
+        }
+    }
+}
+
 impl Timeline {
     async fn finish_compact_batch(
         self: &Arc<Self>,
@@ -5511,37 +5633,65 @@ impl Timeline {
     #[cfg(test)]
     pub(super) async fn force_create_delta_layer(
         self: &Arc<Timeline>,
-        mut deltas: Vec<(Key, Lsn, Value)>,
+        mut deltas: DeltaLayerTestDesc,
         check_start_lsn: Option<Lsn>,
         ctx: &RequestContext,
     ) -> anyhow::Result<()> {
         let last_record_lsn = self.get_last_record_lsn();
-        deltas.sort_unstable_by(|(ka, la, _), (kb, lb, _)| (ka, la).cmp(&(kb, lb)));
-        let min_key = *deltas.first().map(|(k, _, _)| k).unwrap();
-        let end_key = deltas.last().map(|(k, _, _)| k).unwrap().next();
-        let min_lsn = *deltas.iter().map(|(_, lsn, _)| lsn).min().unwrap();
-        let max_lsn = *deltas.iter().map(|(_, lsn, _)| lsn).max().unwrap();
+        deltas
+            .data
+            .sort_unstable_by(|(ka, la, _), (kb, lb, _)| (ka, la).cmp(&(kb, lb)));
+        assert!(deltas.data.first().unwrap().0 >= deltas.key_range.start);
+        assert!(deltas.data.last().unwrap().0 < deltas.key_range.end);
+        for (_, lsn, _) in &deltas.data {
+            assert!(deltas.lsn_range.start <= *lsn && *lsn < deltas.lsn_range.end);
+        }
         assert!(
-            max_lsn <= last_record_lsn,
-            "advance last record lsn before inserting a layer, max_lsn={max_lsn}, last_record_lsn={last_record_lsn}"
+            deltas.lsn_range.end <= last_record_lsn,
+            "advance last record lsn before inserting a layer, end_lsn={}, last_record_lsn={}",
+            deltas.lsn_range.end,
+            last_record_lsn
         );
-        let end_lsn = Lsn(max_lsn.0 + 1);
         if let Some(check_start_lsn) = check_start_lsn {
-            assert!(min_lsn >= check_start_lsn);
+            assert!(deltas.lsn_range.start >= check_start_lsn);
+        }
+        // check if the delta layer does not violate the LSN invariant, the legacy compaction should always produce a batch of
+        // layers of the same start/end LSN, and so should the force inserted layer
+        {
+            /// Checks if a overlaps with b, assume a/b = [start, end).
+            pub fn overlaps_with<T: Ord>(a: &Range<T>, b: &Range<T>) -> bool {
+                !(a.end <= b.start || b.end <= a.start)
+            }
+
+            let guard = self.layers.read().await;
+            for layer in guard.layer_map().iter_historic_layers() {
+                if layer.is_delta()
+                    && overlaps_with(&layer.lsn_range, &deltas.lsn_range)
+                    && layer.lsn_range != deltas.lsn_range
+                {
+                    // If a delta layer overlaps with another delta layer AND their LSN range is not the same, panic
+                    panic!(
+                        "inserted layer violates delta layer LSN invariant: current_lsn_range={}..{}, conflict_lsn_range={}..{}",
+                        deltas.lsn_range.start, deltas.lsn_range.end, layer.lsn_range.start, layer.lsn_range.end
+                    );
+                }
+            }
         }
         let mut delta_layer_writer = DeltaLayerWriter::new(
             self.conf,
             self.timeline_id,
             self.tenant_shard_id,
-            min_key,
-            min_lsn..end_lsn,
+            deltas.key_range.start,
+            deltas.lsn_range,
             ctx,
         )
         .await?;
-        for (key, lsn, val) in deltas {
+        for (key, lsn, val) in deltas.data {
             delta_layer_writer.put_value(key, lsn, val, ctx).await?;
         }
-        let delta_layer = delta_layer_writer.finish(end_key, self, ctx).await?;
+        let delta_layer = delta_layer_writer
+            .finish(deltas.key_range.end, self, ctx)
+            .await?;
 
         {
             let mut guard = self.layers.write().await;

pageserver/src/tenant/timeline/delete.rs

@@ -272,6 +272,7 @@ impl DeleteTimelineFlow {
                 TimelineResources {
                     remote_client,
                     timeline_get_throttle: tenant.timeline_get_throttle.clone(),
+                    l0_flush_global_state: tenant.l0_flush_global_state.clone(),
                 },
                 // Important. We dont pass ancestor above because it can be missing.
                 // Thus we need to skip the validation here.

pageserver/src/tenant/timeline/walreceiver/walreceiver_connection.rs

@@ -26,7 +26,7 @@ use tracing::{debug, error, info, trace, warn, Instrument};
 use super::TaskStateUpdate;
 use crate::{
     context::RequestContext,
-    metrics::{LIVE_CONNECTIONS_COUNT, WALRECEIVER_STARTED_CONNECTIONS, WAL_INGEST},
+    metrics::{LIVE_CONNECTIONS, WALRECEIVER_STARTED_CONNECTIONS, WAL_INGEST},
     task_mgr::TaskKind,
     task_mgr::WALRECEIVER_RUNTIME,
     tenant::{debug_assert_current_span_has_tenant_and_timeline_id, Timeline, WalReceiverInfo},
@@ -208,14 +208,9 @@ pub(super) async fn handle_walreceiver_connection(
         .instrument(tracing::info_span!("poller")),
     );
 
-    // Immediately increment the gauge, then create a job to decrement it on task exit.
-    // One of the pros of `defer!` is that this will *most probably*
-    // get called, even in presence of panics.
-    let gauge = LIVE_CONNECTIONS_COUNT.with_label_values(&["wal_receiver"]);
-    gauge.inc();
-    scopeguard::defer! {
-        gauge.dec();
-    }
+    let _guard = LIVE_CONNECTIONS
+        .with_label_values(&["wal_receiver"])
+        .guard();
 
     let identify = identify_system(&replication_client).await?;
     info!("{identify:?}");

pgxn/neon/Makefile

@@ -6,6 +6,7 @@ OBJS = \
 	$(WIN32RES) \
 	extension_server.o \
 	file_cache.o \
+	hll.o \
 	libpagestore.o \
 	neon.o \
 	neon_utils.o \
@@ -22,7 +23,7 @@ SHLIB_LINK_INTERNAL = $(libpq)
 SHLIB_LINK = -lcurl
 
 EXTENSION = neon
-DATA = neon--1.0.sql neon--1.0--1.1.sql neon--1.1--1.2.sql neon--1.2--1.3.sql neon--1.3--1.2.sql neon--1.2--1.1.sql neon--1.1--1.0.sql
+DATA = neon--1.0.sql neon--1.0--1.1.sql neon--1.1--1.2.sql neon--1.2--1.3.sql neon--1.3--1.2.sql neon--1.2--1.1.sql neon--1.1--1.0.sql  neon--1.3--1.4.sql neon--1.4--1.3.sql
 PGFILEDESC = "neon - cloud storage for PostgreSQL"
 
 EXTRA_CLEAN = \

pgxn/neon/file_cache.c

@@ -26,7 +26,6 @@
 #include "miscadmin.h"
 #include "pagestore_client.h"
 #include "common/hashfn.h"
-#include "lib/hyperloglog.h"
 #include "pgstat.h"
 #include "postmaster/bgworker.h"
 #include RELFILEINFO_HDR
@@ -40,6 +39,8 @@
 #include "utils/dynahash.h"
 #include "utils/guc.h"
 
+#include "hll.h"
+
 /*
  * Local file cache is used to temporary store relations pages in local file system.
  * All blocks of all relations are stored inside one file and addressed using shared hash map.
@@ -62,7 +63,6 @@
 #define BLOCKS_PER_CHUNK	128 /* 1Mb chunk */
 #define MB					((uint64)1024*1024)
 
-#define HYPER_LOG_LOG_BIT_WIDTH   10
 #define SIZE_MB_TO_CHUNKS(size) ((uint32)((size) * MB / BLCKSZ / BLOCKS_PER_CHUNK))
 
 typedef struct FileCacheEntry
@@ -87,8 +87,7 @@ typedef struct FileCacheControl
 	uint64		writes;
 	dlist_head	lru;			/* double linked list for LRU replacement
 								 * algorithm */
-	hyperLogLogState wss_estimation; /* estimation of wroking set size */
-	uint8_t		hyperloglog_hashes[(1 << HYPER_LOG_LOG_BIT_WIDTH) + 1];
+	HyperLogLogState wss_estimation; /* estimation of working set size */
 } FileCacheControl;
 
 static HTAB *lfc_hash;
@@ -238,12 +237,7 @@ lfc_shmem_startup(void)
 		dlist_init(&lfc_ctl->lru);
 
 		/* Initialize hyper-log-log structure for estimating working set size */
-		initHyperLogLog(&lfc_ctl->wss_estimation, HYPER_LOG_LOG_BIT_WIDTH);
-
-		/* We need hashes in shared memory */
-		pfree(lfc_ctl->wss_estimation.hashesArr);
-		memset(lfc_ctl->hyperloglog_hashes, 0, sizeof lfc_ctl->hyperloglog_hashes);
-		lfc_ctl->wss_estimation.hashesArr = lfc_ctl->hyperloglog_hashes;
+		initSHLL(&lfc_ctl->wss_estimation);
 
 		/* Recreate file cache on restart */
 		fd = BasicOpenFile(lfc_path, O_RDWR | O_CREAT | O_TRUNC);
@@ -545,7 +539,7 @@ lfc_read(NRelFileInfo rinfo, ForkNumber forkNum, BlockNumber blkno,
 
 	/* Approximate working set */
 	tag.blockNum = blkno;
-	addHyperLogLog(&lfc_ctl->wss_estimation, hash_bytes((uint8_t const*)&tag, sizeof(tag)));
+	addSHLL(&lfc_ctl->wss_estimation, hash_bytes((uint8_t const*)&tag, sizeof(tag)));
 
 	if (entry == NULL || (entry->bitmap[chunk_offs >> 5] & (1 << (chunk_offs & 31))) == 0)
 	{
@@ -986,20 +980,38 @@ local_cache_pages(PG_FUNCTION_ARGS)
 		SRF_RETURN_DONE(funcctx);
 }
 
+PG_FUNCTION_INFO_V1(approximate_working_set_size_seconds);
+
+Datum
+approximate_working_set_size_seconds(PG_FUNCTION_ARGS)
+{
+	if (lfc_size_limit != 0)
+	{
+		int32 dc;
+		time_t duration = PG_ARGISNULL(0) ? (time_t)-1 : PG_GETARG_INT32(0);
+		LWLockAcquire(lfc_lock, LW_SHARED);
+		dc = (int32) estimateSHLL(&lfc_ctl->wss_estimation, duration);
+		LWLockRelease(lfc_lock);
+		PG_RETURN_INT32(dc);
+	}
+	PG_RETURN_NULL();
+}
+
 PG_FUNCTION_INFO_V1(approximate_working_set_size);
 
 Datum
 approximate_working_set_size(PG_FUNCTION_ARGS)
 {
-	int32 dc = -1;
 	if (lfc_size_limit != 0)
 	{
+		int32 dc;
 		bool reset = PG_GETARG_BOOL(0);
 		LWLockAcquire(lfc_lock, reset ? LW_EXCLUSIVE : LW_SHARED);
-		dc = (int32) estimateHyperLogLog(&lfc_ctl->wss_estimation);
+		dc = (int32) estimateSHLL(&lfc_ctl->wss_estimation, (time_t)-1);
 		if (reset)
-			memset(lfc_ctl->hyperloglog_hashes, 0, sizeof lfc_ctl->hyperloglog_hashes);
+			memset(lfc_ctl->wss_estimation.regs, 0, sizeof lfc_ctl->wss_estimation.regs);
 		LWLockRelease(lfc_lock);
+		PG_RETURN_INT32(dc);
 	}
-	PG_RETURN_INT32(dc);
+	PG_RETURN_NULL();
 }

pgxn/neon/hll.c

@@ -0,0 +1,193 @@
+/*-------------------------------------------------------------------------
+ *
+ * hll.c
+ *	  Sliding HyperLogLog cardinality estimator
+ *
+ * Portions Copyright (c) 2014-2023, PostgreSQL Global Development Group
+ *
+ * Implements https://hal.science/hal-00465313/document
+ * 
+ * Based on Hideaki Ohno's C++ implementation.  This is probably not ideally
+ * suited to estimating the cardinality of very large sets;  in particular, we
+ * have not attempted to further optimize the implementation as described in
+ * the Heule, Nunkesser and Hall paper "HyperLogLog in Practice: Algorithmic
+ * Engineering of a State of The Art Cardinality Estimation Algorithm".
+ *
+ * A sparse representation of HyperLogLog state is used, with fixed space
+ * overhead.
+ *
+ * The copyright terms of Ohno's original version (the MIT license) follow.
+ *
+ * IDENTIFICATION
+ *	  src/backend/lib/hyperloglog.c
+ *
+ *-------------------------------------------------------------------------
+ */
+
+/*
+ * Copyright (c) 2013 Hideaki Ohno <hide.o.j55{at}gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the 'Software'), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <math.h>
+
+#include "postgres.h"
+#include "funcapi.h"
+#include "port/pg_bitutils.h"
+#include "utils/timestamp.h"
+#include "hll.h"
+
+
+#define POW_2_32			(4294967296.0)
+#define NEG_POW_2_32		(-4294967296.0)
+
+#define ALPHA_MM ((0.7213 / (1.0 + 1.079 / HLL_N_REGISTERS)) * HLL_N_REGISTERS * HLL_N_REGISTERS)
+
+/*
+ * Worker for addHyperLogLog().
+ *
+ * Calculates the position of the first set bit in first b bits of x argument
+ * starting from the first, reading from most significant to least significant
+ * bits.
+ *
+ * Example (when considering fist 10 bits of x):
+ *
+ * rho(x = 0b1000000000)   returns 1
+ * rho(x = 0b0010000000)   returns 3
+ * rho(x = 0b0000000000)   returns b + 1
+ *
+ * "The binary address determined by the first b bits of x"
+ *
+ * Return value "j" used to index bit pattern to watch.
+ */
+static inline uint8
+rho(uint32 x, uint8 b)
+{
+	uint8		j = 1;
+
+	if (x == 0)
+		return b + 1;
+
+	j = 32 - pg_leftmost_one_pos32(x);
+
+	if (j > b)
+		return b + 1;
+
+	return j;
+}
+
+/*
+ * Initialize HyperLogLog track state
+ */
+void
+initSHLL(HyperLogLogState *cState)
+{
+	memset(cState->regs, 0, sizeof(cState->regs));
+}
+
+/*
+ * Adds element to the estimator, from caller-supplied hash.
+ *
+ * It is critical that the hash value passed be an actual hash value, typically
+ * generated using hash_any().  The algorithm relies on a specific bit-pattern
+ * observable in conjunction with stochastic averaging.  There must be a
+ * uniform distribution of bits in hash values for each distinct original value
+ * observed.
+ */
+void
+addSHLL(HyperLogLogState *cState, uint32 hash)
+{
+	uint8		count;
+	uint32		index;
+	size_t		i;
+	size_t		j;
+
+	TimestampTz	now = GetCurrentTimestamp();
+	/* Use the first "k" (registerWidth) bits as a zero based index */
+	index = hash >> HLL_C_BITS;
+
+	/* Compute the rank of the remaining 32 - "k" (registerWidth) bits */
+	count = rho(hash << HLL_BIT_WIDTH, HLL_C_BITS);
+
+	cState->regs[index][count] = now;
+}
+
+static uint8
+getMaximum(const TimestampTz* reg, TimestampTz since)
+{
+	uint8 max = 0;
+
+	for (size_t i = 0; i < HLL_C_BITS + 1; i++)
+	{
+		if (reg[i] >= since)
+		{
+			max = i;
+		}
+	}
+
+	return max;
+}
+
+
+/*
+ * Estimates cardinality, based on elements added so far
+ */
+double
+estimateSHLL(HyperLogLogState *cState, time_t duration)
+{
+	double		result;
+	double		sum = 0.0;
+	size_t		i;
+	uint8       R[HLL_N_REGISTERS];
+	/* 0 indicates uninitialized timestamp, so if we need to cover the whole range than starts with 1 */
+	TimestampTz since = duration == (time_t)-1 ? 1 : GetCurrentTimestamp() - duration * USECS_PER_SEC;
+
+	for (i = 0; i < HLL_N_REGISTERS; i++)
+	{
+		R[i] = getMaximum(cState->regs[i], since);
+		sum += 1.0 / pow(2.0, R[i]);
+	}
+
+	/* result set to "raw" HyperLogLog estimate (E in the HyperLogLog paper) */
+	result = ALPHA_MM / sum;
+
+	if (result <= (5.0 / 2.0) * HLL_N_REGISTERS)
+	{
+		/* Small range correction */
+		int			zero_count = 0;
+
+		for (i = 0; i < HLL_N_REGISTERS; i++)
+		{
+			zero_count += R[i] == 0;
+		}
+
+		if (zero_count != 0)
+			result = HLL_N_REGISTERS * log((double) HLL_N_REGISTERS /
+										   zero_count);
+	}
+	else if (result > (1.0 / 30.0) * POW_2_32)
+	{
+		/* Large range correction */
+		result = NEG_POW_2_32 * log(1.0 - (result / POW_2_32));
+	}
+
+	return result;
+}
+

pgxn/neon/hll.h

@@ -0,0 +1,86 @@
+/*-------------------------------------------------------------------------
+ *
+ * hll.h
+ *	  Sliding HyperLogLog cardinality estimator
+ *
+ * Portions Copyright (c) 2014-2023, PostgreSQL Global Development Group
+ *
+ * Implements https://hal.science/hal-00465313/document
+ * 
+ * Based on Hideaki Ohno's C++ implementation.  This is probably not ideally
+ * suited to estimating the cardinality of very large sets;  in particular, we
+ * have not attempted to further optimize the implementation as described in
+ * the Heule, Nunkesser and Hall paper "HyperLogLog in Practice: Algorithmic
+ * Engineering of a State of The Art Cardinality Estimation Algorithm".
+ *
+ * A sparse representation of HyperLogLog state is used, with fixed space
+ * overhead.
+ *
+ * The copyright terms of Ohno's original version (the MIT license) follow.
+ *
+ * IDENTIFICATION
+ *	  src/backend/lib/hyperloglog.c
+ *
+ *-------------------------------------------------------------------------
+ */
+
+/*
+ * Copyright (c) 2013 Hideaki Ohno <hide.o.j55{at}gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the 'Software'), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef HLL_H
+#define HLL_H
+
+#define HLL_BIT_WIDTH   10
+#define HLL_C_BITS      (32 - HLL_BIT_WIDTH)
+#define HLL_N_REGISTERS (1 << HLL_BIT_WIDTH)
+
+/*
+ * HyperLogLog is an approximate technique for computing the number of distinct
+ * entries in a set.  Importantly, it does this by using a fixed amount of
+ * memory.  See the 2007 paper "HyperLogLog: the analysis of a near-optimal
+ * cardinality estimation algorithm" for more.
+ *
+ * Instead of a single counter for every bits register, we have a timestamp
+ * for every valid number of bits we can encounter. Every time we encounter
+ * a certain number of bits, we update the timestamp in those registers to
+ * the current timestamp.
+ *
+ * We can query the sketch's stored cardinality for the range of some timestamp
+ * up to now: For each register, we return the highest bits bucket that has a
+ * modified timestamp >= the query timestamp. This value is the number of bits
+ * for this register in the normal HLL calculation.
+ *
+ * The memory usage is 2^B * (C + 1) * sizeof(TimetampTz), or 184kiB.
+ * Usage could be halved if we decide to reduce the required time dimension
+ * precision; as 32 bits in second precision should be enough for statistics.
+ * However, that is not yet implemented.
+ */
+typedef struct HyperLogLogState
+{
+	TimestampTz regs[HLL_N_REGISTERS][HLL_C_BITS + 1];
+} HyperLogLogState;
+
+extern void   initSHLL(HyperLogLogState *cState);
+extern void   addSHLL(HyperLogLogState *cState, uint32 hash);
+extern double estimateSHLL(HyperLogLogState *cState, time_t dutration);
+
+#endif

pgxn/neon/libpagestore.c

@@ -427,12 +427,17 @@ pageserver_connect(shardno_t shard_no, int elevel)
 		values[n_pgsql_params] = NULL;
 
 		shard->conn = PQconnectStartParams(keywords, values, 1);
-		if (!shard->conn)
+		if (PQstatus(shard->conn) == CONNECTION_BAD)
 		{
-			neon_shard_log(shard_no, elevel, "Failed to connect to pageserver: out of memory");
+			char	   *msg = pchomp(PQerrorMessage(shard->conn));
+			CLEANUP_AND_DISCONNECT(shard);
+			ereport(elevel,
+					(errcode(ERRCODE_SQLCLIENT_UNABLE_TO_ESTABLISH_SQLCONNECTION),
+						errmsg(NEON_TAG "[shard %d] could not establish connection to pageserver", shard_no),
+						errdetail_internal("%s", msg)));
+			pfree(msg);
 			return false;
 		}
-
 		shard->state = PS_Connecting_Startup;
 		/* fallthrough */
 	}

pgxn/neon/neon--1.3--1.4.sql

@@ -0,0 +1,9 @@
+\echo Use "ALTER EXTENSION neon UPDATE TO '1.4'" to load this file. \quit
+
+CREATE FUNCTION approximate_working_set_size_seconds(duration integer default null)
+RETURNS integer
+AS 'MODULE_PATHNAME', 'approximate_working_set_size_seconds'
+LANGUAGE C PARALLEL SAFE;
+
+GRANT EXECUTE ON FUNCTION approximate_working_set_size_seconds(integer) TO pg_monitor;
+

pgxn/neon/neon--1.4--1.3.sql

@@ -0,0 +1 @@
+DROP FUNCTION IF EXISTS approximate_working_set_size_seconds(integer) CASCADE;

pgxn/neon_test_utils/Makefile

@@ -7,7 +7,7 @@ OBJS = \
 	neontest.o
 
 EXTENSION = neon_test_utils
-DATA = neon_test_utils--1.1.sql
+DATA = neon_test_utils--1.3.sql
 PGFILEDESC = "neon_test_utils - helpers for neon testing and debugging"
 
 PG_CONFIG = pg_config

pgxn/neon_test_utils/neon_test_utils--1.3.sql

@@ -41,7 +41,25 @@ RETURNS bytea
 AS 'MODULE_PATHNAME', 'get_raw_page_at_lsn_ex'
 LANGUAGE C PARALLEL UNSAFE;
 
-CREATE FUNCTION neon_xlogflush(lsn pg_lsn)
+CREATE FUNCTION neon_xlogflush(lsn pg_lsn DEFAULT NULL)
 RETURNS VOID
 AS 'MODULE_PATHNAME', 'neon_xlogflush'
 LANGUAGE C PARALLEL UNSAFE;
+
+CREATE FUNCTION trigger_panic()
+RETURNS VOID
+AS 'MODULE_PATHNAME', 'trigger_panic'
+LANGUAGE C PARALLEL UNSAFE;
+
+CREATE FUNCTION trigger_segfault()
+RETURNS VOID
+AS 'MODULE_PATHNAME', 'trigger_segfault'
+LANGUAGE C PARALLEL UNSAFE;
+
+-- Alias for `trigger_segfault`, just because `SELECT 💣()` looks fun
+CREATE OR REPLACE FUNCTION 💣() RETURNS void
+LANGUAGE plpgsql AS $$
+BEGIN
+    PERFORM trigger_segfault();
+END;
+$$;

pgxn/neon_test_utils/neon_test_utils.control

@@ -1,6 +1,6 @@
 # neon_test_utils extension
 comment = 'helpers for neon testing and debugging'
-default_version = '1.1'
+default_version = '1.3'
 module_pathname = '$libdir/neon_test_utils'
 relocatable = true
 trusted = true

pgxn/neon_test_utils/neontest.c

@@ -15,6 +15,7 @@
 #include "access/relation.h"
 #include "access/xact.h"
 #include "access/xlog.h"
+#include "access/xlog_internal.h"
 #include "catalog/namespace.h"
 #include "fmgr.h"
 #include "funcapi.h"
@@ -41,6 +42,8 @@ PG_FUNCTION_INFO_V1(clear_buffer_cache);
 PG_FUNCTION_INFO_V1(get_raw_page_at_lsn);
 PG_FUNCTION_INFO_V1(get_raw_page_at_lsn_ex);
 PG_FUNCTION_INFO_V1(neon_xlogflush);
+PG_FUNCTION_INFO_V1(trigger_panic);
+PG_FUNCTION_INFO_V1(trigger_segfault);
 
 /*
  * Linkage to functions in neon module.
@@ -444,12 +447,68 @@ get_raw_page_at_lsn_ex(PG_FUNCTION_ARGS)
 
 /*
  * Directly calls XLogFlush(lsn) to flush WAL buffers.
+ *
+ * If 'lsn' is not specified (is NULL), flush all generated WAL.
  */
 Datum
 neon_xlogflush(PG_FUNCTION_ARGS)
 {
-	XLogRecPtr	lsn = PG_GETARG_LSN(0);
+	XLogRecPtr	lsn;
+
+	if (RecoveryInProgress())
+		ereport(ERROR,
+				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
+				 errmsg("recovery is in progress"),
+				 errhint("cannot flush WAL during recovery.")));
+
+	if (!PG_ARGISNULL(0))
+		lsn = PG_GETARG_LSN(0);
+	else
+	{
+		lsn = GetXLogInsertRecPtr();
+
+		/*---
+		 * The LSN returned by GetXLogInsertRecPtr() is the position where the
+		 * next inserted record would begin. If the last record ended just at
+		 * the page boundary, the next record will begin after the page header
+		 * on the next page, but the next page's page header has not been
+		 * written yet. If we tried to flush it, XLogFlush() would throw an
+		 * error:
+		 *
+		 * ERROR : xlog flush request %X/%X is not satisfied --- flushed only to %X/%X
+		 *
+		 * To avoid that, if the insert position points to just after the page
+		 * header, back off to page boundary.
+		 */
+		if (lsn % XLOG_BLCKSZ == SizeOfXLogShortPHD &&
+			XLogSegmentOffset(lsn, wal_segment_size) > XLOG_BLCKSZ)
+			lsn -= SizeOfXLogShortPHD;
+		else if (lsn % XLOG_BLCKSZ == SizeOfXLogLongPHD &&
+				 XLogSegmentOffset(lsn, wal_segment_size) < XLOG_BLCKSZ)
+			lsn -= SizeOfXLogLongPHD;
+	}
 
 	XLogFlush(lsn);
 	PG_RETURN_VOID();
 }
+
+/*
+ * Function to trigger panic.
+ */
+Datum
+trigger_panic(PG_FUNCTION_ARGS)
+{
+    elog(PANIC, "neon_test_utils: panic");
+    PG_RETURN_VOID();
+}
+
+/*
+ * Function to trigger a segfault.
+ */
+Datum
+trigger_segfault(PG_FUNCTION_ARGS)
+{
+    int *ptr = NULL;
+    *ptr = 42;
+    PG_RETURN_VOID();
+}

poetry.lock

@@ -1,4 +1,4 @@
-# This file is automatically @generated by Poetry 1.8.2 and should not be changed by hand.
+# This file is automatically @generated by Poetry 1.8.3 and should not be changed by hand.
 
 [[package]]
 name = "aiohttp"
@@ -734,13 +734,13 @@ typing-extensions = ">=4.1.0"
 
 [[package]]
 name = "certifi"
-version = "2023.7.22"
+version = "2024.7.4"
 description = "Python package for providing Mozilla's CA Bundle."
 optional = false
 python-versions = ">=3.6"
 files = [
-    {file = "certifi-2023.7.22-py3-none-any.whl", hash = "sha256:92d6037539857d8206b8f6ae472e8b77db8058fec5937a1ef3f54304089edbb9"},
-    {file = "certifi-2023.7.22.tar.gz", hash = "sha256:539cc1d13202e33ca466e88b2807e29f4c13049d6d87031a3c110744495cb082"},
+    {file = "certifi-2024.7.4-py3-none-any.whl", hash = "sha256:c198e21b1289c2ab85ee4e67bb4b4ef3ead0892059901a8d5b622f24a1101e90"},
+    {file = "certifi-2024.7.4.tar.gz", hash = "sha256:5a1e7645bc0ec61a09e26c36f6106dd4cf40c6db3a1fb6352b0244e7fb057c7b"},
 ]
 
 [[package]]

proxy/src/bin/proxy.rs

@@ -35,6 +35,7 @@ use proxy::usage_metrics;
 use anyhow::bail;
 use proxy::config::{self, ProxyConfig};
 use proxy::serverless;
+use remote_storage::RemoteStorageConfig;
 use std::net::SocketAddr;
 use std::pin::pin;
 use std::sync::Arc;
@@ -205,8 +206,8 @@ struct ProxyCliArgs {
     /// remote storage configuration for backup metric collection
     /// Encoded as toml (same format as pageservers), eg
     /// `{bucket_name='the-bucket',bucket_region='us-east-1',prefix_in_bucket='proxy',endpoint='http://minio:9000'}`
-    #[clap(long, default_value = "{}")]
-    metric_backup_collection_remote_storage: String,
+    #[clap(long, value_parser = remote_storage_from_toml)]
+    metric_backup_collection_remote_storage: Option<RemoteStorageConfig>,
     /// chunk size for backup metric collection
     /// Size of each event is no more than 400 bytes, so 2**22 is about 200MB before the compression.
     #[clap(long, default_value = "4194304")]
@@ -511,9 +512,7 @@ fn build_config(args: &ProxyCliArgs) -> anyhow::Result<&'static ProxyConfig> {
     }
     let backup_metric_collection_config = config::MetricBackupCollectionConfig {
         interval: args.metric_backup_collection_interval,
-        remote_storage_config: remote_storage_from_toml(
-            &args.metric_backup_collection_remote_storage,
-        )?,
+        remote_storage_config: args.metric_backup_collection_remote_storage.clone(),
         chunk_size: args.metric_backup_collection_chunk_size,
     };
 

proxy/src/cache/common.rs

@@ -53,6 +53,13 @@ impl<C: Cache, V> Cached<C, V> {
         )
     }
 
+    pub fn map<U>(self, f: impl FnOnce(V) -> U) -> Cached<C, U> {
+        Cached {
+            token: self.token,
+            value: f(self.value),
+        }
+    }
+
     /// Drop this entry from a cache if it's still there.
     pub fn invalidate(self) -> V {
         if let Some((cache, info)) = &self.token {

proxy/src/cache/timed_lru.rs

@@ -65,6 +65,8 @@ impl<K: Hash + Eq, V> Cache for TimedLru<K, V> {
 struct Entry<T> {
     created_at: Instant,
     expires_at: Instant,
+    ttl: Duration,
+    update_ttl_on_retrieval: bool,
     value: T,
 }
 
@@ -122,7 +124,6 @@ impl<K: Hash + Eq, V> TimedLru<K, V> {
         Q: Hash + Eq + ?Sized,
     {
         let now = Instant::now();
-        let deadline = now.checked_add(self.ttl).expect("time overflow");
 
         // Do costly things before taking the lock.
         let mut cache = self.cache.lock();
@@ -142,7 +143,8 @@ impl<K: Hash + Eq, V> TimedLru<K, V> {
         let (created_at, expires_at) = (entry.created_at, entry.expires_at);
 
         // Update the deadline and the entry's position in the LRU list.
-        if self.update_ttl_on_retrieval {
+        let deadline = now.checked_add(raw_entry.get().ttl).expect("time overflow");
+        if raw_entry.get().update_ttl_on_retrieval {
             raw_entry.get_mut().expires_at = deadline;
         }
         raw_entry.to_back();
@@ -162,12 +164,27 @@ impl<K: Hash + Eq, V> TimedLru<K, V> {
     /// existed, return the previous value and its creation timestamp.
     #[tracing::instrument(level = "debug", fields(cache = self.name), skip_all)]
     fn insert_raw(&self, key: K, value: V) -> (Instant, Option<V>) {
+        self.insert_raw_ttl(key, value, self.ttl, self.update_ttl_on_retrieval)
+    }
+
+    /// Insert an entry to the cache. If an entry with the same key already
+    /// existed, return the previous value and its creation timestamp.
+    #[tracing::instrument(level = "debug", fields(cache = self.name), skip_all)]
+    fn insert_raw_ttl(
+        &self,
+        key: K,
+        value: V,
+        ttl: Duration,
+        update: bool,
+    ) -> (Instant, Option<V>) {
         let created_at = Instant::now();
-        let expires_at = created_at.checked_add(self.ttl).expect("time overflow");
+        let expires_at = created_at.checked_add(ttl).expect("time overflow");
 
         let entry = Entry {
             created_at,
             expires_at,
+            ttl,
+            update_ttl_on_retrieval: update,
             value,
         };
 
@@ -190,6 +207,21 @@ impl<K: Hash + Eq, V> TimedLru<K, V> {
 }
 
 impl<K: Hash + Eq + Clone, V: Clone> TimedLru<K, V> {
+    pub fn insert_ttl(&self, key: K, value: V, ttl: Duration) {
+        self.insert_raw_ttl(key, value, ttl, false);
+    }
+
+    pub fn insert_unit(&self, key: K, value: V) -> (Option<V>, Cached<&Self, ()>) {
+        let (created_at, old) = self.insert_raw(key.clone(), value);
+
+        let cached = Cached {
+            token: Some((self, LookupInfo { created_at, key })),
+            value: (),
+        };
+
+        (old, cached)
+    }
+
     pub fn insert(&self, key: K, value: V) -> (Option<V>, Cached<&Self>) {
         let (created_at, old) = self.insert_raw(key.clone(), value.clone());
 

proxy/src/config.rs

@@ -399,15 +399,11 @@ impl FromStr for EndpointCacheConfig {
 #[derive(Debug)]
 pub struct MetricBackupCollectionConfig {
     pub interval: Duration,
-    pub remote_storage_config: OptRemoteStorageConfig,
+    pub remote_storage_config: Option<RemoteStorageConfig>,
     pub chunk_size: usize,
 }
 
-/// Hack to avoid clap being smarter. If you don't use this type alias, clap assumes more about the optional state and you get
-/// runtime type errors from the value parser we use.
-pub type OptRemoteStorageConfig = Option<RemoteStorageConfig>;
-
-pub fn remote_storage_from_toml(s: &str) -> anyhow::Result<OptRemoteStorageConfig> {
+pub fn remote_storage_from_toml(s: &str) -> anyhow::Result<RemoteStorageConfig> {
     RemoteStorageConfig::from_toml(&s.parse()?)
 }
 

proxy/src/console/messages.rs

@@ -9,7 +9,7 @@ use crate::proxy::retry::CouldRetry;
 
 /// Generic error response with human-readable description.
 /// Note that we can't always present it to user as is.
-#[derive(Debug, Deserialize)]
+#[derive(Debug, Deserialize, Clone)]
 pub struct ConsoleError {
     pub error: Box<str>,
     #[serde(skip)]
@@ -82,41 +82,19 @@ impl CouldRetry for ConsoleError {
             .details
             .error_info
             .map_or(Reason::Unknown, |e| e.reason);
-        match reason {
-            // not a transitive error
-            Reason::RoleProtected => false,
-            // on retry, it will still not be found
-            Reason::ResourceNotFound
-            | Reason::ProjectNotFound
-            | Reason::EndpointNotFound
-            | Reason::BranchNotFound => false,
-            // we were asked to go away
-            Reason::RateLimitExceeded
-            | Reason::NonDefaultBranchComputeTimeExceeded
-            | Reason::ActiveTimeQuotaExceeded
-            | Reason::ComputeTimeQuotaExceeded
-            | Reason::WrittenDataQuotaExceeded
-            | Reason::DataTransferQuotaExceeded
-            | Reason::LogicalSizeQuotaExceeded => false,
-            // transitive error. control plane is currently busy
-            // but might be ready soon
-            Reason::RunningOperations => true,
-            Reason::ConcurrencyLimitReached => true,
-            Reason::LockAlreadyTaken => true,
-            // unknown error. better not retry it.
-            Reason::Unknown => false,
-        }
+
+        reason.can_retry()
     }
 }
 
-#[derive(Debug, Deserialize)]
+#[derive(Debug, Deserialize, Clone)]
 pub struct Status {
     pub code: Box<str>,
     pub message: Box<str>,
     pub details: Details,
 }
 
-#[derive(Debug, Deserialize)]
+#[derive(Debug, Deserialize, Clone)]
 pub struct Details {
     pub error_info: Option<ErrorInfo>,
     pub retry_info: Option<RetryInfo>,
@@ -199,6 +177,34 @@ impl Reason {
                 | Reason::BranchNotFound
         )
     }
+
+    pub fn can_retry(&self) -> bool {
+        match self {
+            // do not retry role protected errors
+            // not a transitive error
+            Reason::RoleProtected => false,
+            // on retry, it will still not be found
+            Reason::ResourceNotFound
+            | Reason::ProjectNotFound
+            | Reason::EndpointNotFound
+            | Reason::BranchNotFound => false,
+            // we were asked to go away
+            Reason::RateLimitExceeded
+            | Reason::NonDefaultBranchComputeTimeExceeded
+            | Reason::ActiveTimeQuotaExceeded
+            | Reason::ComputeTimeQuotaExceeded
+            | Reason::WrittenDataQuotaExceeded
+            | Reason::DataTransferQuotaExceeded
+            | Reason::LogicalSizeQuotaExceeded => false,
+            // transitive error. control plane is currently busy
+            // but might be ready soon
+            Reason::RunningOperations
+            | Reason::ConcurrencyLimitReached
+            | Reason::LockAlreadyTaken => true,
+            // unknown error. better not retry it.
+            Reason::Unknown => false,
+        }
+    }
 }
 
 #[derive(Copy, Clone, Debug, Deserialize)]
@@ -206,7 +212,7 @@ pub struct RetryInfo {
     pub retry_delay_ms: u64,
 }
 
-#[derive(Debug, Deserialize)]
+#[derive(Debug, Deserialize, Clone)]
 pub struct UserFacingMessage {
     pub message: Box<str>,
 }

proxy/src/console/provider.rs

@@ -2,7 +2,7 @@
 pub mod mock;
 pub mod neon;
 
-use super::messages::MetricsAuxInfo;
+use super::messages::{ConsoleError, MetricsAuxInfo};
 use crate::{
     auth::{
         backend::{ComputeCredentialKeys, ComputeUserInfo},
@@ -317,8 +317,8 @@ impl NodeInfo {
     }
 }
 
-pub type NodeInfoCache = TimedLru<EndpointCacheKey, NodeInfo>;
-pub type CachedNodeInfo = Cached<&'static NodeInfoCache>;
+pub type NodeInfoCache = TimedLru<EndpointCacheKey, Result<NodeInfo, Box<ConsoleError>>>;
+pub type CachedNodeInfo = Cached<&'static NodeInfoCache, NodeInfo>;
 pub type CachedRoleSecret = Cached<&'static ProjectInfoCacheImpl, Option<AuthSecret>>;
 pub type CachedAllowedIps = Cached<&'static ProjectInfoCacheImpl, Arc<Vec<IpPattern>>>;
 

proxy/src/console/provider/neon.rs

@@ -9,7 +9,7 @@ use super::{
 use crate::{
     auth::backend::ComputeUserInfo,
     compute,
-    console::messages::ColdStartInfo,
+    console::messages::{ColdStartInfo, Reason},
     http,
     metrics::{CacheOutcome, Metrics},
     rate_limiter::EndpointRateLimiter,
@@ -17,10 +17,10 @@ use crate::{
 };
 use crate::{cache::Cached, context::RequestMonitoring};
 use futures::TryFutureExt;
-use std::sync::Arc;
+use std::{sync::Arc, time::Duration};
 use tokio::time::Instant;
 use tokio_postgres::config::SslMode;
-use tracing::{error, info, info_span, warn, Instrument};
+use tracing::{debug, error, info, info_span, warn, Instrument};
 
 pub struct Api {
     endpoint: http::Endpoint,
@@ -273,26 +273,34 @@ impl super::Api for Api {
     ) -> Result<CachedNodeInfo, WakeComputeError> {
         let key = user_info.endpoint_cache_key();
 
+        macro_rules! check_cache {
+            () => {
+                if let Some(cached) = self.caches.node_info.get(&key) {
+                    let (cached, info) = cached.take_value();
+                    let info = info.map_err(|c| {
+                        info!(key = &*key, "found cached wake_compute error");
+                        WakeComputeError::ApiError(ApiError::Console(*c))
+                    })?;
+
+                    debug!(key = &*key, "found cached compute node info");
+                    ctx.set_project(info.aux.clone());
+                    return Ok(cached.map(|()| info));
+                }
+            };
+        }
+
         // Every time we do a wakeup http request, the compute node will stay up
         // for some time (highly depends on the console's scale-to-zero policy);
         // The connection info remains the same during that period of time,
         // which means that we might cache it to reduce the load and latency.
-        if let Some(cached) = self.caches.node_info.get(&key) {
-            info!(key = &*key, "found cached compute node info");
-            ctx.set_project(cached.aux.clone());
-            return Ok(cached);
-        }
+        check_cache!();
 
         let permit = self.locks.get_permit(&key).await?;
 
         // after getting back a permit - it's possible the cache was filled
         // double check
         if permit.should_check_cache() {
-            if let Some(cached) = self.caches.node_info.get(&key) {
-                info!(key = &*key, "found cached compute node info");
-                ctx.set_project(cached.aux.clone());
-                return Ok(cached);
-            }
+            check_cache!();
         }
 
         // check rate limit
@@ -300,23 +308,56 @@ impl super::Api for Api {
             .wake_compute_endpoint_rate_limiter
             .check(user_info.endpoint.normalize_intern(), 1)
         {
-            info!(key = &*key, "found cached compute node info");
             return Err(WakeComputeError::TooManyConnections);
         }
 
-        let mut node = permit.release_result(self.do_wake_compute(ctx, user_info).await)?;
-        ctx.set_project(node.aux.clone());
-        let cold_start_info = node.aux.cold_start_info;
-        info!("woken up a compute node");
+        let node = permit.release_result(self.do_wake_compute(ctx, user_info).await);
+        match node {
+            Ok(node) => {
+                ctx.set_project(node.aux.clone());
+                debug!(key = &*key, "created a cache entry for woken compute node");
 
-        // store the cached node as 'warm'
-        node.aux.cold_start_info = ColdStartInfo::WarmCached;
-        let (_, mut cached) = self.caches.node_info.insert(key.clone(), node);
-        cached.aux.cold_start_info = cold_start_info;
+                let mut stored_node = node.clone();
+                // store the cached node as 'warm_cached'
+                stored_node.aux.cold_start_info = ColdStartInfo::WarmCached;
 
-        info!(key = &*key, "created a cache entry for compute node info");
+                let (_, cached) = self.caches.node_info.insert_unit(key, Ok(stored_node));
 
-        Ok(cached)
+                Ok(cached.map(|()| node))
+            }
+            Err(err) => match err {
+                WakeComputeError::ApiError(ApiError::Console(err)) => {
+                    let Some(status) = &err.status else {
+                        return Err(WakeComputeError::ApiError(ApiError::Console(err)));
+                    };
+
+                    let reason = status
+                        .details
+                        .error_info
+                        .map_or(Reason::Unknown, |x| x.reason);
+
+                    // if we can retry this error, do not cache it.
+                    if reason.can_retry() {
+                        return Err(WakeComputeError::ApiError(ApiError::Console(err)));
+                    }
+
+                    // at this point, we should only have quota errors.
+                    debug!(
+                        key = &*key,
+                        "created a cache entry for the wake compute error"
+                    );
+
+                    self.caches.node_info.insert_ttl(
+                        key,
+                        Err(Box::new(err.clone())),
+                        Duration::from_secs(30),
+                    );
+
+                    Err(WakeComputeError::ApiError(ApiError::Console(err)))
+                }
+                err => return Err(err),
+            },
+        }
     }
 }
 

proxy/src/context/parquet.rs

@@ -14,17 +14,14 @@ use parquet::{
     record::RecordWriter,
 };
 use pq_proto::StartupMessageParams;
-use remote_storage::{GenericRemoteStorage, RemotePath, TimeoutOrCancel};
+use remote_storage::{GenericRemoteStorage, RemotePath, RemoteStorageConfig, TimeoutOrCancel};
 use serde::ser::SerializeMap;
 use tokio::{sync::mpsc, time};
 use tokio_util::sync::CancellationToken;
 use tracing::{debug, info, Span};
 use utils::backoff;
 
-use crate::{
-    config::{remote_storage_from_toml, OptRemoteStorageConfig},
-    context::LOG_CHAN_DISCONNECT,
-};
+use crate::{config::remote_storage_from_toml, context::LOG_CHAN_DISCONNECT};
 
 use super::{RequestMonitoring, LOG_CHAN};
 
@@ -33,11 +30,11 @@ pub struct ParquetUploadArgs {
     /// Storage location to upload the parquet files to.
     /// Encoded as toml (same format as pageservers), eg
     /// `{bucket_name='the-bucket',bucket_region='us-east-1',prefix_in_bucket='proxy',endpoint='http://minio:9000'}`
-    #[clap(long, default_value = "{}", value_parser = remote_storage_from_toml)]
-    parquet_upload_remote_storage: OptRemoteStorageConfig,
+    #[clap(long, value_parser = remote_storage_from_toml)]
+    parquet_upload_remote_storage: Option<RemoteStorageConfig>,
 
-    #[clap(long, default_value = "{}", value_parser = remote_storage_from_toml)]
-    parquet_upload_disconnect_events_remote_storage: OptRemoteStorageConfig,
+    #[clap(long, value_parser = remote_storage_from_toml)]
+    parquet_upload_disconnect_events_remote_storage: Option<RemoteStorageConfig>,
 
     /// How many rows to include in a row group
     #[clap(long, default_value_t = 8192)]

proxy/src/proxy/tests.rs

@@ -540,8 +540,8 @@ fn helper_create_cached_node_info(cache: &'static NodeInfoCache) -> CachedNodeIn
         },
         allow_self_signed_compute: false,
     };
-    let (_, node) = cache.insert("key".into(), node);
-    node
+    let (_, node2) = cache.insert_unit("key".into(), Ok(node.clone()));
+    node2.map(|()| node)
 }
 
 fn helper_create_connect_info(

safekeeper/src/bin/safekeeper.rs

@@ -12,7 +12,6 @@ use sd_notify::NotifyState;
 use tokio::runtime::Handle;
 use tokio::signal::unix::{signal, SignalKind};
 use tokio::task::JoinError;
-use toml_edit::Document;
 use utils::logging::SecretString;
 
 use std::env::{var, VarError};
@@ -126,7 +125,7 @@ struct Args {
     peer_recovery: bool,
     /// Remote storage configuration for WAL backup (offloading to s3) as TOML
     /// inline table, e.g.
-    ///   {"max_concurrent_syncs" = 17, "max_sync_errors": 13, "bucket_name": "<BUCKETNAME>", "bucket_region":"<REGION>", "concurrency_limit": 119}
+    ///   {max_concurrent_syncs = 17, max_sync_errors = 13, bucket_name = "<BUCKETNAME>", bucket_region = "<REGION>", concurrency_limit = 119}
     /// Safekeeper offloads WAL to
     ///   [prefix_in_bucket/]<tenant_id>/<timeline_id>/<segment_file>, mirroring
     /// structure on the file system.
@@ -446,6 +445,19 @@ async fn start_safekeeper(conf: SafeKeeperConf) -> Result<()> {
         .map(|res| ("WAL service main".to_owned(), res));
     tasks_handles.push(Box::pin(wal_service_handle));
 
+    let timeline_housekeeping_handle = current_thread_rt
+        .as_ref()
+        .unwrap_or_else(|| WAL_SERVICE_RUNTIME.handle())
+        .spawn(async move {
+            const TOMBSTONE_TTL: Duration = Duration::from_secs(3600 * 24);
+            loop {
+                tokio::time::sleep(TOMBSTONE_TTL).await;
+                GlobalTimelines::housekeeping(&TOMBSTONE_TTL);
+            }
+        })
+        .map(|res| ("Timeline map housekeeping".to_owned(), res));
+    tasks_handles.push(Box::pin(timeline_housekeeping_handle));
+
     if let Some(pg_listener_tenant_only) = pg_listener_tenant_only {
         let conf_ = conf.clone();
         let wal_service_handle = current_thread_rt
@@ -553,16 +565,8 @@ fn set_id(workdir: &Utf8Path, given_id: Option<NodeId>) -> Result<NodeId> {
     Ok(my_id)
 }
 
-// Parse RemoteStorage from TOML table.
 fn parse_remote_storage(storage_conf: &str) -> anyhow::Result<RemoteStorageConfig> {
-    // funny toml doesn't consider plain inline table as valid document, so wrap in a key to parse
-    let storage_conf_toml = format!("remote_storage = {storage_conf}");
-    let parsed_toml = storage_conf_toml.parse::<Document>()?; // parse
-    let (_, storage_conf_parsed_toml) = parsed_toml.iter().next().unwrap(); // and strip key off again
-    RemoteStorageConfig::from_toml(storage_conf_parsed_toml).and_then(|parsed_config| {
-        // XXX: Don't print the original toml here, there might be some sensitive data
-        parsed_config.context("Incorrectly parsed remote storage toml as no remote storage config")
-    })
+    RemoteStorageConfig::from_toml(&storage_conf.parse()?)
 }
 
 #[test]

safekeeper/src/timelines_global_map.rs

@@ -15,12 +15,19 @@ use std::collections::HashMap;
 use std::str::FromStr;
 use std::sync::atomic::Ordering;
 use std::sync::{Arc, Mutex};
+use std::time::{Duration, Instant};
 use tracing::*;
 use utils::id::{TenantId, TenantTimelineId, TimelineId};
 use utils::lsn::Lsn;
 
 struct GlobalTimelinesState {
     timelines: HashMap<TenantTimelineId, Arc<Timeline>>,
+
+    // A tombstone indicates this timeline used to exist has been deleted.  These are used to prevent
+    // on-demand timeline creation from recreating deleted timelines.  This is only soft-enforced, as
+    // this map is dropped on restart.
+    tombstones: HashMap<TenantTimelineId, Instant>,
+
     conf: Option<SafeKeeperConf>,
     broker_active_set: Arc<TimelinesSet>,
     load_lock: Arc<tokio::sync::Mutex<TimelineLoadLock>>,
@@ -64,11 +71,17 @@ impl GlobalTimelinesState {
             .cloned()
             .ok_or(TimelineError::NotFound(*ttid))
     }
+
+    fn delete(&mut self, ttid: TenantTimelineId) {
+        self.timelines.remove(&ttid);
+        self.tombstones.insert(ttid, Instant::now());
+    }
 }
 
 static TIMELINES_STATE: Lazy<Mutex<GlobalTimelinesState>> = Lazy::new(|| {
     Mutex::new(GlobalTimelinesState {
         timelines: HashMap::new(),
+        tombstones: HashMap::new(),
         conf: None,
         broker_active_set: Arc::new(TimelinesSet::default()),
         load_lock: Arc::new(tokio::sync::Mutex::new(TimelineLoadLock)),
@@ -198,11 +211,17 @@ impl GlobalTimelines {
                 let tli = Arc::new(timeline);
 
                 // TODO: prevent concurrent timeline creation/loading
-                TIMELINES_STATE
-                    .lock()
-                    .unwrap()
-                    .timelines
-                    .insert(ttid, tli.clone());
+                {
+                    let mut state = TIMELINES_STATE.lock().unwrap();
+
+                    // We may be have been asked to load a timeline that was previously deleted (e.g. from `pull_timeline.rs`).  We trust
+                    // that the human doing this manual intervention knows what they are doing, and remove its tombstone.
+                    if state.tombstones.remove(&ttid).is_some() {
+                        warn!("Un-deleted timeline {ttid}");
+                    }
+
+                    state.timelines.insert(ttid, tli.clone());
+                }
 
                 tli.bootstrap(&conf, broker_active_set, partial_backup_rate_limiter);
 
@@ -229,7 +248,7 @@ impl GlobalTimelines {
 
     /// Create a new timeline with the given id. If the timeline already exists, returns
     /// an existing timeline.
-    pub async fn create(
+    pub(crate) async fn create(
         ttid: TenantTimelineId,
         server_info: ServerInfo,
         commit_lsn: Lsn,
@@ -241,6 +260,11 @@ impl GlobalTimelines {
                 // Timeline already exists, return it.
                 return Ok(timeline);
             }
+
+            if state.tombstones.contains_key(&ttid) {
+                anyhow::bail!("Timeline {ttid} is deleted, refusing to recreate");
+            }
+
             state.get_dependencies()
         };
 
@@ -300,17 +324,19 @@ impl GlobalTimelines {
     /// Get a timeline from the global map. If it's not present, it doesn't exist on disk,
     /// or was corrupted and couldn't be loaded on startup. Returned timeline is always valid,
     /// i.e. loaded in memory and not cancelled.
-    pub fn get(ttid: TenantTimelineId) -> Result<Arc<Timeline>, TimelineError> {
-        let res = TIMELINES_STATE.lock().unwrap().get(&ttid);
-
-        match res {
+    pub(crate) fn get(ttid: TenantTimelineId) -> Result<Arc<Timeline>, TimelineError> {
+        let tli_res = {
+            let state = TIMELINES_STATE.lock().unwrap();
+            state.get(&ttid)
+        };
+        match tli_res {
             Ok(tli) => {
                 if tli.is_cancelled() {
                     return Err(TimelineError::Cancelled(ttid));
                 }
                 Ok(tli)
             }
-            _ => res,
+            _ => tli_res,
         }
     }
 
@@ -339,12 +365,26 @@ impl GlobalTimelines {
 
     /// Cancels timeline, then deletes the corresponding data directory.
     /// If only_local, doesn't remove WAL segments in remote storage.
-    pub async fn delete(
+    pub(crate) async fn delete(
         ttid: &TenantTimelineId,
         only_local: bool,
     ) -> Result<TimelineDeleteForceResult> {
-        let tli_res = TIMELINES_STATE.lock().unwrap().get(ttid);
-        match tli_res {
+        let tli_res = {
+            let state = TIMELINES_STATE.lock().unwrap();
+
+            if state.tombstones.contains_key(ttid) {
+                // Presence of a tombstone guarantees that a previous deletion has completed and there is no work to do.
+                info!("Timeline {ttid} was already deleted");
+                return Ok(TimelineDeleteForceResult {
+                    dir_existed: false,
+                    was_active: false,
+                });
+            }
+
+            state.get(ttid)
+        };
+
+        let result = match tli_res {
             Ok(timeline) => {
                 let was_active = timeline.broker_active.load(Ordering::Relaxed);
 
@@ -354,11 +394,6 @@ impl GlobalTimelines {
                 info!("deleting timeline {}, only_local={}", ttid, only_local);
                 let dir_existed = timeline.delete(&mut shared_state, only_local).await?;
 
-                // Remove timeline from the map.
-                // FIXME: re-enable it once we fix the issue with recreation of deleted timelines
-                // https://github.com/neondatabase/neon/issues/3146
-                // TIMELINES_STATE.lock().unwrap().timelines.remove(ttid);
-
                 Ok(TimelineDeleteForceResult {
                     dir_existed,
                     was_active, // TODO: we probably should remove this field
@@ -374,7 +409,14 @@ impl GlobalTimelines {
                     was_active: false,
                 })
             }
-        }
+        };
+
+        // Finalize deletion, by dropping Timeline objects and storing smaller tombstones.  The tombstones
+        // are used to prevent still-running computes from re-creating the same timeline when they send data,
+        // and to speed up repeated deletion calls by avoiding re-listing objects.
+        TIMELINES_STATE.lock().unwrap().delete(*ttid);
+
+        result
     }
 
     /// Deactivates and deletes all timelines for the tenant. Returns map of all timelines which
@@ -420,19 +462,20 @@ impl GlobalTimelines {
             tenant_id,
         ))?;
 
-        // FIXME: we temporarily disabled removing timelines from the map, see `delete_force`
-        // let tlis_after_delete = Self::get_all_for_tenant(*tenant_id);
-        // if !tlis_after_delete.is_empty() {
-        //     // Some timelines were created while we were deleting them, returning error
-        //     // to the caller, so it can retry later.
-        //     bail!(
-        //         "failed to delete all timelines for tenant {}: some timelines were created while we were deleting them",
-        //         tenant_id
-        //     );
-        // }
-
         Ok(deleted)
     }
+
+    pub fn housekeeping(tombstone_ttl: &Duration) {
+        let mut state = TIMELINES_STATE.lock().unwrap();
+
+        // We keep tombstones long enough to have a good chance of preventing rogue computes from re-creating deleted
+        // timelines.  If a compute kept running for longer than this TTL (or across a safekeeper restart) then they
+        // may recreate a deleted timeline.
+        let now = Instant::now();
+        state
+            .tombstones
+            .retain(|_, v| now.duration_since(*v) < *tombstone_ttl);
+    }
 }
 
 #[derive(Clone, Copy, Serialize)]

storage_scrubber/src/checks.rs

@@ -259,7 +259,7 @@ pub(crate) enum BlobDataParseResult {
     Incorrect(Vec<String>),
 }
 
-fn parse_layer_object_name(name: &str) -> Result<(LayerName, Generation), String> {
+pub(crate) fn parse_layer_object_name(name: &str) -> Result<(LayerName, Generation), String> {
     match name.rsplit_once('-') {
         // FIXME: this is gross, just use a regex?
         Some((layer_filename, gen)) if gen.len() == 8 => {

storage_scrubber/src/find_large_objects.rs

@@ -0,0 +1,120 @@
+use futures::{StreamExt, TryStreamExt};
+use pageserver::tenant::storage_layer::LayerName;
+use serde::{Deserialize, Serialize};
+
+use crate::{
+    checks::parse_layer_object_name, init_remote, list_objects_with_retries,
+    metadata_stream::stream_tenants, BucketConfig, NodeKind,
+};
+
+#[derive(Serialize, Deserialize, Clone, Copy, PartialEq, Eq)]
+enum LargeObjectKind {
+    DeltaLayer,
+    ImageLayer,
+    Other,
+}
+
+impl LargeObjectKind {
+    fn from_key(key: &str) -> Self {
+        let fname = key.split('/').last().unwrap();
+
+        let Ok((layer_name, _generation)) = parse_layer_object_name(fname) else {
+            return LargeObjectKind::Other;
+        };
+
+        match layer_name {
+            LayerName::Image(_) => LargeObjectKind::ImageLayer,
+            LayerName::Delta(_) => LargeObjectKind::DeltaLayer,
+        }
+    }
+}
+
+#[derive(Serialize, Deserialize, Clone)]
+pub struct LargeObject {
+    pub key: String,
+    pub size: u64,
+    kind: LargeObjectKind,
+}
+
+#[derive(Serialize, Deserialize)]
+pub struct LargeObjectListing {
+    pub objects: Vec<LargeObject>,
+}
+
+pub async fn find_large_objects(
+    bucket_config: BucketConfig,
+    min_size: u64,
+    ignore_deltas: bool,
+    concurrency: usize,
+) -> anyhow::Result<LargeObjectListing> {
+    let (s3_client, target) = init_remote(bucket_config.clone(), NodeKind::Pageserver)?;
+    let tenants = std::pin::pin!(stream_tenants(&s3_client, &target));
+
+    let objects_stream = tenants.map_ok(|tenant_shard_id| {
+        let mut tenant_root = target.tenant_root(&tenant_shard_id);
+        let s3_client = s3_client.clone();
+        async move {
+            let mut objects = Vec::new();
+            let mut total_objects_ctr = 0u64;
+            // We want the objects and not just common prefixes
+            tenant_root.delimiter.clear();
+            let mut continuation_token = None;
+            loop {
+                let fetch_response =
+                    list_objects_with_retries(&s3_client, &tenant_root, continuation_token.clone())
+                        .await?;
+                for obj in fetch_response.contents().iter().filter(|o| {
+                    if let Some(obj_size) = o.size {
+                        min_size as i64 <= obj_size
+                    } else {
+                        false
+                    }
+                }) {
+                    let key = obj.key().expect("couldn't get key").to_owned();
+                    let kind = LargeObjectKind::from_key(&key);
+                    if ignore_deltas && kind == LargeObjectKind::DeltaLayer {
+                        continue;
+                    }
+                    objects.push(LargeObject {
+                        key,
+                        size: obj.size.unwrap() as u64,
+                        kind,
+                    })
+                }
+                total_objects_ctr += fetch_response.contents().len() as u64;
+                match fetch_response.next_continuation_token {
+                    Some(new_token) => continuation_token = Some(new_token),
+                    None => break,
+                }
+            }
+
+            Ok((tenant_shard_id, objects, total_objects_ctr))
+        }
+    });
+    let mut objects_stream = std::pin::pin!(objects_stream.try_buffer_unordered(concurrency));
+
+    let mut objects = Vec::new();
+
+    let mut tenant_ctr = 0u64;
+    let mut object_ctr = 0u64;
+    while let Some(res) = objects_stream.next().await {
+        let (tenant_shard_id, objects_slice, total_objects_ctr) = res?;
+        objects.extend_from_slice(&objects_slice);
+
+        object_ctr += total_objects_ctr;
+        tenant_ctr += 1;
+        if tenant_ctr % 100 == 0 {
+            tracing::info!(
+                "Scanned {tenant_ctr} shards. objects={object_ctr}, found={}, current={tenant_shard_id}.",
+                objects.len()
+            );
+        }
+    }
+
+    let bucket_name = target.bucket_name();
+    tracing::info!(
+        "Scan of {bucket_name} finished. Scanned {tenant_ctr} shards. objects={object_ctr}, found={}.",
+        objects.len()
+    );
+    Ok(LargeObjectListing { objects })
+}

storage_scrubber/src/lib.rs

@@ -2,6 +2,7 @@
 #![deny(clippy::undocumented_unsafe_blocks)]
 pub mod checks;
 pub mod cloud_admin_api;
+pub mod find_large_objects;
 pub mod garbage;
 pub mod metadata_stream;
 pub mod pageserver_physical_gc;

storage_scrubber/src/main.rs

@@ -1,6 +1,7 @@
 use anyhow::bail;
 use camino::Utf8PathBuf;
 use pageserver_api::shard::TenantShardId;
+use storage_scrubber::find_large_objects;
 use storage_scrubber::garbage::{find_garbage, purge_garbage, PurgeMode};
 use storage_scrubber::pageserver_physical_gc::GcMode;
 use storage_scrubber::scan_pageserver_metadata::scan_metadata;
@@ -72,6 +73,14 @@ enum Command {
         #[arg(short, long, default_value_t = GcMode::IndicesOnly)]
         mode: GcMode,
     },
+    FindLargeObjects {
+        #[arg(long = "min-size")]
+        min_size: u64,
+        #[arg(short, long, default_value_t = false)]
+        ignore_deltas: bool,
+        #[arg(long = "concurrency", short = 'j', default_value_t = 64)]
+        concurrency: usize,
+    },
 }
 
 #[tokio::main]
@@ -86,6 +95,7 @@ async fn main() -> anyhow::Result<()> {
         Command::PurgeGarbage { .. } => "purge-garbage",
         Command::TenantSnapshot { .. } => "tenant-snapshot",
         Command::PageserverPhysicalGc { .. } => "pageserver-physical-gc",
+        Command::FindLargeObjects { .. } => "find-large-objects",
     };
     let _guard = init_logging(&format!(
         "{}_{}_{}_{}.log",
@@ -199,5 +209,20 @@ async fn main() -> anyhow::Result<()> {
             println!("{}", serde_json::to_string(&summary).unwrap());
             Ok(())
         }
+        Command::FindLargeObjects {
+            min_size,
+            ignore_deltas,
+            concurrency,
+        } => {
+            let summary = find_large_objects::find_large_objects(
+                bucket_config,
+                min_size,
+                ignore_deltas,
+                concurrency,
+            )
+            .await?;
+            println!("{}", serde_json::to_string(&summary).unwrap());
+            Ok(())
+        }
     }
 }

test_runner/fixtures/metrics.py

@@ -144,6 +144,8 @@ PAGESERVER_PER_TENANT_METRICS: Tuple[str, ...] = (
     "pageserver_smgr_query_seconds_bucket",
     "pageserver_smgr_query_seconds_count",
     "pageserver_smgr_query_seconds_sum",
+    "pageserver_archive_size",
+    "pageserver_pitr_history_size",
     "pageserver_storage_operations_seconds_count_total",
     "pageserver_storage_operations_seconds_sum_total",
     "pageserver_evictions_total",

test_runner/fixtures/neon_fixtures.py

@@ -943,6 +943,8 @@ class NeonEnvBuilder:
                 # if the test threw an exception, don't check for errors
                 # as a failing assertion would cause the cleanup below to fail
                 ps_assert_metric_no_errors=(exc_type is None),
+                # do not fail on endpoint errors to allow the rest of cleanup to proceed
+                fail_on_endpoint_errors=False,
             )
             cleanup_error = None
 
@@ -1167,7 +1169,9 @@ class NeonEnv:
             if config.auth_enabled:
                 sk_cfg["auth_enabled"] = True
             if self.safekeepers_remote_storage is not None:
-                sk_cfg["remote_storage"] = self.safekeepers_remote_storage.to_toml_inline_table()
+                sk_cfg[
+                    "remote_storage"
+                ] = self.safekeepers_remote_storage.to_toml_inline_table().strip()
             self.safekeepers.append(Safekeeper(env=self, id=id, port=port))
             cfg["safekeepers"].append(sk_cfg)
 
@@ -1212,11 +1216,11 @@ class NeonEnv:
         for f in futs:
             f.result()
 
-    def stop(self, immediate=False, ps_assert_metric_no_errors=False):
+    def stop(self, immediate=False, ps_assert_metric_no_errors=False, fail_on_endpoint_errors=True):
         """
         After this method returns, there should be no child processes running.
         """
-        self.endpoints.stop_all()
+        self.endpoints.stop_all(fail_on_endpoint_errors)
 
         # Stop storage controller before pageservers: we don't want it to spuriously
         # detect a pageserver "failure" during test teardown
@@ -2111,6 +2115,21 @@ class NeonStorageController(MetricsGetter, LogUtils):
             self.running = False
         return self
 
+    @staticmethod
+    def retryable_node_operation(op, ps_id, max_attempts, backoff):
+        while max_attempts > 0:
+            try:
+                op(ps_id)
+                return
+            except StorageControllerApiException as e:
+                max_attempts -= 1
+                log.info(f"Operation failed ({max_attempts} attempts left): {e}")
+
+                if max_attempts == 0:
+                    raise e
+
+                time.sleep(backoff)
+
     @staticmethod
     def raise_api_exception(res: requests.Response):
         try:
@@ -2451,6 +2470,38 @@ class NeonStorageController(MetricsGetter, LogUtils):
         )
         log.info("storage controller passed consistency check")
 
+    def poll_node_status(
+        self, node_id: int, desired_scheduling_policy: str, max_attempts: int, backoff: int
+    ):
+        """
+        Poll the node status until it reaches 'desired_scheduling_policy' or 'max_attempts' have been exhausted
+        """
+        log.info(f"Polling {node_id} for {desired_scheduling_policy} scheduling policy")
+        while max_attempts > 0:
+            try:
+                status = self.node_status(node_id)
+                policy = status["scheduling"]
+                if policy == desired_scheduling_policy:
+                    return
+                else:
+                    max_attempts -= 1
+                    log.info(f"Status call returned {policy=} ({max_attempts} attempts left)")
+
+                    if max_attempts == 0:
+                        raise AssertionError(
+                            f"Status for {node_id=} did not reach {desired_scheduling_policy=}"
+                        )
+
+                    time.sleep(backoff)
+            except StorageControllerApiException as e:
+                max_attempts -= 1
+                log.info(f"Status call failed ({max_attempts} retries left): {e}")
+
+                if max_attempts == 0:
+                    raise e
+
+                time.sleep(backoff)
+
     def configure_failpoints(self, config_strings: Tuple[str, str] | List[Tuple[str, str]]):
         if isinstance(config_strings, tuple):
             pairs = [config_strings]
@@ -3851,9 +3902,17 @@ class EndpointFactory:
             pageserver_id=pageserver_id,
         )
 
-    def stop_all(self) -> "EndpointFactory":
+    def stop_all(self, fail_on_error=True) -> "EndpointFactory":
+        exception = None
         for ep in self.endpoints:
-            ep.stop()
+            try:
+                ep.stop()
+            except Exception as e:
+                log.error(f"Failed to stop endpoint {ep.endpoint_id}: {e}")
+                exception = e
+
+        if fail_on_error and exception is not None:
+            raise exception
 
         return self
 

test_runner/fixtures/pageserver/http.py

@@ -599,6 +599,22 @@ class PageserverHttpClient(requests.Session, MetricsGetter):
         res_json = res.json()
         return res_json
 
+    def timeline_lsn_lease(
+        self, tenant_id: Union[TenantId, TenantShardId], timeline_id: TimelineId, lsn: Lsn
+    ):
+        data = {
+            "lsn": str(lsn),
+        }
+
+        log.info(f"Requesting lsn lease for {lsn=}, {tenant_id=}, {timeline_id=}")
+        res = self.post(
+            f"http://localhost:{self.port}/v1/tenant/{tenant_id}/timeline/{timeline_id}/lsn_lease",
+            json=data,
+        )
+        self.verbose_error(res)
+        res_json = res.json()
+        return res_json
+
     def timeline_get_timestamp_of_lsn(
         self, tenant_id: Union[TenantId, TenantShardId], timeline_id: TimelineId, lsn: Lsn
     ):

test_runner/fixtures/pageserver/many_tenants.py

@@ -42,10 +42,6 @@ def single_timeline(
 
     log.info("detach template tenant form pageserver")
     env.pageserver.tenant_detach(template_tenant)
-    env.pageserver.allowed_errors.append(
-        # tenant detach causes this because the underlying attach-hook removes the tenant from storage controller entirely
-        ".*Dropped remote consistent LSN updates.*",
-    )
 
     log.info(f"duplicating template tenant {ncopies} times in S3")
     tenants = fixtures.pageserver.remote_storage.duplicate_tenant(env, template_tenant, ncopies)

test_runner/performance/pageserver/interactive/test_many_small_tenants.py

@@ -55,10 +55,6 @@ def setup_env(
         }
         template_tenant, template_timeline = env.neon_cli.create_tenant(set_default=True)
         env.pageserver.tenant_detach(template_tenant)
-        env.pageserver.allowed_errors.append(
-            # tenant detach causes this because the underlying attach-hook removes the tenant from storage controller entirely
-            ".*Dropped remote consistent LSN updates.*",
-        )
         env.pageserver.tenant_attach(template_tenant, config)
         ep = env.endpoints.create_start("main", tenant_id=template_tenant)
         ep.safe_psql("create table foo(b text)")

test_runner/performance/pageserver/pagebench/test_large_slru_basebackup.py

@@ -86,10 +86,6 @@ def setup_tenant_template(env: NeonEnv, n_txns: int):
 
     template_tenant, template_timeline = env.neon_cli.create_tenant(set_default=True)
     env.pageserver.tenant_detach(template_tenant)
-    env.pageserver.allowed_errors.append(
-        # tenant detach causes this because the underlying attach-hook removes the tenant from storage controller entirely
-        ".*Dropped remote consistent LSN updates.*",
-    )
     env.pageserver.tenant_attach(template_tenant, config)
 
     ps_http = env.pageserver.http_client()

test_runner/performance/pageserver/pagebench/test_pageserver_max_throughput_getpage_at_latest_lsn.py

@@ -1,4 +1,5 @@
 import json
+import os
 from pathlib import Path
 from typing import Any, Dict, Tuple
 
@@ -17,30 +18,74 @@ from performance.pageserver.util import (
     setup_pageserver_with_tenants,
 )
 
+# The following tests use pagebench "getpage at latest LSN" to characterize the throughput of the pageserver.
+# originally there was a single test named `test_pageserver_max_throughput_getpage_at_latest_lsn``
+# so you still see some references to this name in the code.
+# To avoid recreating the snapshots for each test, we continue to use the name `max_throughput_latest_lsn`
+# for some files and metrics.
+
 
 # For reference, the space usage of the snapshots:
-# admin@ip-172-31-13-23:[~/neon-main]: sudo du -hs /instance_store/test_output/shared-snapshots
-# 137G    /instance_store/test_output/shared-snapshots
-# admin@ip-172-31-13-23:[~/neon-main]: sudo du -hs /instance_store/test_output/shared-snapshots/*
-# 1.8G    /instance_store/test_output/shared-snapshots/max_throughput_latest_lsn-1-13
-# 1.1G    /instance_store/test_output/shared-snapshots/max_throughput_latest_lsn-1-6
-# 8.5G    /instance_store/test_output/shared-snapshots/max_throughput_latest_lsn-10-13
-# 5.1G    /instance_store/test_output/shared-snapshots/max_throughput_latest_lsn-10-6
-# 76G     /instance_store/test_output/shared-snapshots/max_throughput_latest_lsn-100-13
-# 46G     /instance_store/test_output/shared-snapshots/max_throughput_latest_lsn-100-6
-@pytest.mark.parametrize("duration", [30])
-@pytest.mark.parametrize("pgbench_scale", [get_scale_for_db(s) for s in [100, 200]])
-@pytest.mark.parametrize("n_tenants", [1, 10])
-@pytest.mark.timeout(
-    10000
-)  # TODO: this value is just "a really high number"; have this per instance type
-def test_pageserver_max_throughput_getpage_at_latest_lsn(
+# sudo du -hs /instance_store/neon/test_output/shared-snapshots/*
+# 416G	/instance_store/neon/test_output/shared-snapshots/max_throughput_latest_lsn-500-13
+@pytest.mark.parametrize("duration", [60 * 60])
+@pytest.mark.parametrize("pgbench_scale", [get_scale_for_db(200)])
+@pytest.mark.parametrize("n_tenants", [500])
+@pytest.mark.timeout(10000)
+@pytest.mark.skipif(
+    os.getenv("CI", "false") == "true",
+    reason="This test needs lot of resources and should run on dedicated HW, not in github action runners as part of CI",
+)
+def test_pageserver_characterize_throughput_with_n_tenants(
     neon_env_builder: NeonEnvBuilder,
     zenbenchmark: NeonBenchmarker,
     pg_bin: PgBin,
     n_tenants: int,
     pgbench_scale: int,
     duration: int,
+):
+    setup_and_run_pagebench_benchmark(
+        neon_env_builder, zenbenchmark, pg_bin, n_tenants, pgbench_scale, duration, 1
+    )
+
+
+# For reference, the space usage of the snapshots:
+# sudo du -hs /instance_store/neon/test_output/shared-snapshots/*
+# 19G	/instance_store/neon/test_output/shared-snapshots/max_throughput_latest_lsn-1-136
+@pytest.mark.parametrize("duration", [20 * 60])
+@pytest.mark.parametrize("pgbench_scale", [get_scale_for_db(2048)])
+# we use 1 client to characterize latencies, and 64 clients to characterize throughput/scalability
+# we use 64 clients because typically for a high number of connections we recommend the connection pooler
+# which by default uses 64 connections
+@pytest.mark.parametrize("n_clients", [1, 64])
+@pytest.mark.parametrize("n_tenants", [1])
+@pytest.mark.timeout(2400)
+@pytest.mark.skipif(
+    os.getenv("CI", "false") == "true",
+    reason="This test needs lot of resources and should run on dedicated HW, not in github action runners as part of CI",
+)
+def test_pageserver_characterize_latencies_with_1_client_and_throughput_with_many_clients_one_tenant(
+    neon_env_builder: NeonEnvBuilder,
+    zenbenchmark: NeonBenchmarker,
+    pg_bin: PgBin,
+    n_tenants: int,
+    pgbench_scale: int,
+    duration: int,
+    n_clients: int,
+):
+    setup_and_run_pagebench_benchmark(
+        neon_env_builder, zenbenchmark, pg_bin, n_tenants, pgbench_scale, duration, n_clients
+    )
+
+
+def setup_and_run_pagebench_benchmark(
+    neon_env_builder: NeonEnvBuilder,
+    zenbenchmark: NeonBenchmarker,
+    pg_bin: PgBin,
+    n_tenants: int,
+    pgbench_scale: int,
+    duration: int,
+    n_clients: int,
 ):
     def record(metric, **kwargs):
         zenbenchmark.record(
@@ -55,6 +100,7 @@ def test_pageserver_max_throughput_getpage_at_latest_lsn(
             "n_tenants": (n_tenants, {"unit": ""}),
             "pgbench_scale": (pgbench_scale, {"unit": ""}),
             "duration": (duration, {"unit": "s"}),
+            "n_clients": (n_clients, {"unit": ""}),
         }
     )
 
@@ -96,7 +142,7 @@ def test_pageserver_max_throughput_getpage_at_latest_lsn(
         r".*query handler for.*pagestream.*failed: unexpected message: CopyFail during COPY.*"
     )
 
-    run_benchmark_max_throughput_latest_lsn(env, pg_bin, record, duration)
+    run_pagebench_benchmark(env, pg_bin, record, duration, n_clients)
 
 
 def setup_tenant_template(env: NeonEnv, pg_bin: PgBin, scale: int):
@@ -118,10 +164,6 @@ def setup_tenant_template(env: NeonEnv, pg_bin: PgBin, scale: int):
     }
     template_tenant, template_timeline = env.neon_cli.create_tenant(set_default=True)
     env.pageserver.tenant_detach(template_tenant)
-    env.pageserver.allowed_errors.append(
-        # tenant detach causes this because the underlying attach-hook removes the tenant from storage controller entirely
-        ".*Dropped remote consistent LSN updates.*",
-    )
     env.pageserver.tenant_attach(template_tenant, config)
     ps_http = env.pageserver.http_client()
     with env.endpoints.create_start("main", tenant_id=template_tenant) as ep:
@@ -157,8 +199,8 @@ def setup_tenant_template(env: NeonEnv, pg_bin: PgBin, scale: int):
     return (template_tenant, template_timeline, config)
 
 
-def run_benchmark_max_throughput_latest_lsn(
-    env: NeonEnv, pg_bin: PgBin, record, duration_secs: int
+def run_pagebench_benchmark(
+    env: NeonEnv, pg_bin: PgBin, record, duration_secs: int, n_clients: int
 ):
     """
     Benchmark `env.pageserver` for max throughput @ latest LSN and record results in `zenbenchmark`.
@@ -172,6 +214,8 @@ def run_benchmark_max_throughput_latest_lsn(
         ps_http.base_url,
         "--page-service-connstring",
         env.pageserver.connstr(password=None),
+        "--num-clients",
+        str(n_clients),
         "--runtime",
         f"{duration_secs}s",
         # don't specify the targets explicitly, let pagebench auto-discover them

test_runner/performance/pageserver/util.py

@@ -22,7 +22,7 @@ def ensure_pageserver_ready_for_benchmarking(env: NeonEnv, n_tenants: int):
 
     log.info("wait for all tenants to become active")
     wait_until_all_tenants_state(
-        ps_http, "Active", iterations=n_tenants, period=1, http_error_ok=False
+        ps_http, "Active", iterations=10 + n_tenants, period=1, http_error_ok=False
     )
 
     # ensure all layers are resident for predictiable performance

test_runner/performance/test_storage_controller_scale.py

@@ -1,18 +1,89 @@
 import concurrent.futures
 import random
 import time
+from collections import defaultdict
+from typing import Any, Dict
 
 import pytest
 from fixtures.common_types import TenantId, TenantShardId, TimelineId
 from fixtures.compute_reconfigure import ComputeReconfigure
 from fixtures.log_helper import log
-from fixtures.neon_fixtures import (
-    NeonEnvBuilder,
-)
+from fixtures.neon_fixtures import NeonEnv, NeonEnvBuilder
 from fixtures.pageserver.http import PageserverHttpClient
 from fixtures.pg_version import PgVersion
 
 
+def get_consistent_node_shard_counts(env: NeonEnv, total_shards) -> defaultdict[str, int]:
+    """
+    Get the number of shards attached to each node.
+    This function takes into account the intersection of the intent and the observed state.
+    If they do not match, it asserts out.
+    """
+    tenants = env.storage_controller.tenant_list()
+
+    intent = dict()
+    observed = dict()
+
+    tenant_placement: defaultdict[str, Dict[str, Any]] = defaultdict(
+        lambda: {
+            "observed": {"attached": None, "secondary": []},
+            "intent": {"attached": None, "secondary": []},
+        }
+    )
+
+    for t in tenants:
+        for node_id, loc_state in t["observed"]["locations"].items():
+            if (
+                loc_state is not None
+                and "conf" in loc_state
+                and loc_state["conf"] is not None
+                and loc_state["conf"]["mode"]
+                in set(["AttachedSingle", "AttachedMulti", "AttachedStale"])
+            ):
+                observed[t["tenant_shard_id"]] = int(node_id)
+                tenant_placement[t["tenant_shard_id"]]["observed"]["attached"] = int(node_id)
+
+            if (
+                loc_state is not None
+                and "conf" in loc_state
+                and loc_state["conf"] is not None
+                and loc_state["conf"]["mode"] == "Secondary"
+            ):
+                tenant_placement[t["tenant_shard_id"]]["observed"]["secondary"].append(int(node_id))
+
+        if "attached" in t["intent"]:
+            intent[t["tenant_shard_id"]] = t["intent"]["attached"]
+            tenant_placement[t["tenant_shard_id"]]["intent"]["attached"] = t["intent"]["attached"]
+
+        if "secondary" in t["intent"]:
+            tenant_placement[t["tenant_shard_id"]]["intent"]["secondary"] += t["intent"][
+                "secondary"
+            ]
+
+    log.info(f"{tenant_placement=}")
+
+    matching = {
+        tid: intent[tid] for tid in observed if tid in intent and intent[tid] == observed[tid]
+    }
+    assert len(matching) == total_shards
+
+    attached_per_node: defaultdict[str, int] = defaultdict(int)
+    for node_id in matching.values():
+        attached_per_node[node_id] += 1
+
+    return attached_per_node
+
+
+def assert_consistent_balanced_attachments(env: NeonEnv, total_shards):
+    attached_per_node = get_consistent_node_shard_counts(env, total_shards)
+
+    min_shard_count = min(attached_per_node.values())
+    max_shard_count = max(attached_per_node.values())
+
+    flake_factor = 5 / 100
+    assert max_shard_count - min_shard_count <= int(total_shards * flake_factor)
+
+
 @pytest.mark.timeout(3600)  # super long running test: should go down as we optimize
 def test_storage_controller_many_tenants(
     neon_env_builder: NeonEnvBuilder, compute_reconfigure_listener: ComputeReconfigure
@@ -44,7 +115,8 @@ def test_storage_controller_many_tenants(
     # A small sleep on each call into the notify hook, to simulate the latency of doing a database write
     compute_reconfigure_listener.register_on_notify(lambda body: time.sleep(0.01))
 
-    env = neon_env_builder.init_start()
+    env = neon_env_builder.init_configs()
+    neon_env_builder.start()
 
     # We will intentionally stress reconciler concurrrency, which triggers a warning when lots
     # of shards are hitting the delayed path.
@@ -60,14 +132,6 @@ def test_storage_controller_many_tenants(
     )
 
     for ps in env.pageservers:
-        # This can happen because when we do a loop over all pageservers and mark them offline/active,
-        # reconcilers might get cancelled, and the next reconcile can follow a not-so-elegant path of
-        # bumping generation before other attachments are detached.
-        #
-        # We could clean this up by making reconcilers respect the .observed of their predecessor, if
-        # we spawn with a wait for the predecessor.
-        ps.allowed_errors.append(".*Dropped remote consistent LSN updates.*")
-
         # Storage controller is allowed to drop pageserver requests when the cancellation token
         # for a Reconciler fires.
         ps.allowed_errors.append(".*request was dropped before completing.*")
@@ -79,6 +143,8 @@ def test_storage_controller_many_tenants(
     shard_count = 2
     stripe_size = 1024
 
+    total_shards = tenant_count * shard_count
+
     tenants = set(TenantId.generate() for _i in range(0, tenant_count))
 
     virtual_ps_http = PageserverHttpClient(env.storage_controller_port, lambda: True)
@@ -195,10 +261,44 @@ def test_storage_controller_many_tenants(
     env.storage_controller.consistency_check()
     check_memory()
 
-    # Restart pageservers: this exercises the /re-attach API
-    for pageserver in env.pageservers:
-        pageserver.stop()
-        pageserver.start()
+    shard_counts = get_consistent_node_shard_counts(env, total_shards)
+    log.info(f"Shard counts before rolling restart: {shard_counts}")
+
+    assert_consistent_balanced_attachments(env, total_shards)
+
+    # Restart pageservers gracefully: this exercises the /re-attach pageserver API
+    # and the storage controller drain and fill API
+    for ps in env.pageservers:
+        env.storage_controller.retryable_node_operation(
+            lambda ps_id: env.storage_controller.node_drain(ps_id), ps.id, max_attempts=3, backoff=2
+        )
+
+        env.storage_controller.poll_node_status(
+            ps.id, "PauseForRestart", max_attempts=24, backoff=5
+        )
+
+        shard_counts = get_consistent_node_shard_counts(env, total_shards)
+        log.info(f"Shard counts after draining node {ps.id}: {shard_counts}")
+        # Assert that we've drained the node
+        assert shard_counts[str(ps.id)] == 0
+        # Assert that those shards actually went somewhere
+        assert sum(shard_counts.values()) == total_shards
+
+        ps.restart()
+        env.storage_controller.poll_node_status(ps.id, "Active", max_attempts=24, backoff=1)
+
+        env.storage_controller.retryable_node_operation(
+            lambda ps_id: env.storage_controller.node_fill(ps_id), ps.id, max_attempts=3, backoff=2
+        )
+        env.storage_controller.poll_node_status(ps.id, "Active", max_attempts=24, backoff=5)
+
+        shard_counts = get_consistent_node_shard_counts(env, total_shards)
+        log.info(f"Shard counts after filling node {ps.id}: {shard_counts}")
+
+        assert_consistent_balanced_attachments(env, total_shards)
+
+        env.storage_controller.reconcile_until_idle()
+        env.storage_controller.consistency_check()
 
     # Consistency check is safe here: restarting pageservers should not have caused any Reconcilers to spawn,
     # as they were not offline long enough to trigger any scheduling changes.

test_runner/pg_clients/java/jdbc/Dockerfile

@@ -1,4 +1,4 @@
-FROM openjdk:21
+FROM openjdk:22
 WORKDIR /source
 
 COPY . .

test_runner/pg_clients/python/pg8000/requirements.txt

@@ -1,2 +1,2 @@
-pg8000==1.30.5
+pg8000==1.31.2
 scramp>=1.4.3

test_runner/pg_clients/rust/tokio-postgres/Cargo.lock

@@ -4,9 +4,9 @@ version = 3
 
 [[package]]
 name = "addr2line"
-version = "0.21.0"
+version = "0.22.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8a30b2e23b9e17a9f90641c7ab1549cd9b44f296d3ccbf309d2863cfe398a0cb"
+checksum = "6e4503c46a5c0c7844e948c9a4d6acd9f50cccb4de1c48eb9e291ea17470c678"
 dependencies = [
  "gimli",
 ]
@@ -19,9 +19,9 @@ checksum = "f26201604c87b1e01bd3d98f8d5d9a8fcbb815e8cedb41ffccbeb4bf593a35fe"
 
 [[package]]
 name = "async-trait"
-version = "0.1.77"
+version = "0.1.80"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c980ee35e870bd1a4d2c8294d4c04d0499e67bca1e4b5cefcc693c2fa00caea9"
+checksum = "c6fa2087f2753a7da8cc1c0dbfcf89579dd57458e36769de5ac750b4671737ca"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -30,15 +30,15 @@ dependencies = [
 
 [[package]]
 name = "autocfg"
-version = "1.1.0"
+version = "1.3.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d468802bab17cbc0cc575e9b053f41e72aa36bfa6b7f55e3529ffa43161b97fa"
+checksum = "0c4b4d0bd25bd0b74681c0ad21497610ce1b7c91b1022cd21c80c6fbdd9476b0"
 
 [[package]]
 name = "backtrace"
-version = "0.3.69"
+version = "0.3.73"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2089b7e3f35b9dd2d0ed921ead4f6d318c27680d4a5bd167b3ee120edb105837"
+checksum = "5cc23269a4f8976d0a4d2e7109211a419fe30e8d88d677cd60b6bc79c5732e0a"
 dependencies = [
  "addr2line",
  "cc",
@@ -63,9 +63,9 @@ checksum = "bef38d45163c2f1dde094a7dfd33ccf595c92905c8f8f4fdc18d06fb1037718a"
 
 [[package]]
 name = "bitflags"
-version = "2.4.2"
+version = "2.6.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ed570934406eb16438a4e976b1b4500774099c13b8cb96eec99f620f05090ddf"
+checksum = "b048fb63fd8b5923fc5aa7b340d8e156aec7ec02f0c78fa8a6ddc2613f6f71de"
 
 [[package]]
 name = "block-buffer"
@@ -78,9 +78,9 @@ dependencies = [
 
 [[package]]
 name = "bumpalo"
-version = "3.15.3"
+version = "3.16.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8ea184aa71bb362a1157c896979544cc23974e08fd265f29ea96b59f0b4a555b"
+checksum = "79296716171880943b8470b5f8d03aa55eb2e645a4874bdbb28adb49162e012c"
 
 [[package]]
 name = "byteorder"
@@ -90,15 +90,15 @@ checksum = "1fd0f2584146f6f2ef48085050886acf353beff7305ebd1ae69500e27c67f64b"
 
 [[package]]
 name = "bytes"
-version = "1.5.0"
+version = "1.6.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a2bd12c1caf447e69cd4528f47f94d203fd2582878ecb9e9465484c4148a8223"
+checksum = "514de17de45fdb8dc022b1a7975556c53c86f9f0aa5f534b98977b171857c2c9"
 
 [[package]]
 name = "cc"
-version = "1.0.89"
+version = "1.0.101"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a0ba8f7aaa012f30d5b2861462f6708eccd49c3c39863fe083a308035f63d723"
+checksum = "ac367972e516d45567c7eafc73d24e1c193dcf200a8d94e9db7b3d38b349572d"
 
 [[package]]
 name = "cfg-if"
@@ -154,9 +154,9 @@ dependencies = [
 
 [[package]]
 name = "errno"
-version = "0.3.8"
+version = "0.3.9"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a258e46cdc063eb8519c00b9fc845fc47bcfca4130e2f08e88665ceda8474245"
+checksum = "534c5cf6194dfab3db3242765c03bbe257cf92f22b38f6bc0c58d59108a820ba"
 dependencies = [
  "libc",
  "windows-sys 0.52.0",
@@ -170,15 +170,9 @@ checksum = "4443176a9f2c162692bd3d352d745ef9413eec5782a80d8fd6f8a1ac692a07f7"
 
 [[package]]
 name = "fastrand"
-version = "2.0.1"
+version = "2.1.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "25cbce373ec4653f1a01a31e8a5e5ec0c622dc27ff9c4e6606eefef5cbbed4a5"
-
-[[package]]
-name = "finl_unicode"
-version = "1.2.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8fcfdc7a0362c9f4444381a9e697c79d435fe65b52a37466fc2c1184cee9edc6"
+checksum = "9fc0510504f03c51ada170672ac806f1f105a88aa97a5281117e1ddc3368e51a"
 
 [[package]]
 name = "foreign-types"
@@ -296,9 +290,9 @@ dependencies = [
 
 [[package]]
 name = "getrandom"
-version = "0.2.12"
+version = "0.2.15"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "190092ea657667030ac6a35e305e62fc4dd69fd98ac98631e5d3a2b1575a12b5"
+checksum = "c4567c8db10ae91089c99af84c68c38da3ec2f087c3f82960bcdbf3656b6f4d7"
 dependencies = [
  "cfg-if",
  "libc",
@@ -307,9 +301,9 @@ dependencies = [
 
 [[package]]
 name = "gimli"
-version = "0.28.1"
+version = "0.29.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4271d37baee1b8c7e4b708028c57d816cf9d2434acb33a549475f78c181f6253"
+checksum = "40ecd4077b5ae9fd2e9e169b102c6c330d0605168eb0e8bf79952b256dbefffd"
 
 [[package]]
 name = "hmac"
@@ -329,29 +323,23 @@ dependencies = [
  "wasm-bindgen",
 ]
 
-[[package]]
-name = "lazy_static"
-version = "1.4.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e2abad23fbc42b3700f2f279844dc832adb2b2eb069b2df918f455c4e18cc646"
-
 [[package]]
 name = "libc"
-version = "0.2.153"
+version = "0.2.155"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9c198f91728a82281a64e1f4f9eeb25d82cb32a5de251c6bd1b5154d63a8e7bd"
+checksum = "97b3888a4aecf77e811145cadf6eef5901f4782c53886191b2f693f24761847c"
 
 [[package]]
 name = "linux-raw-sys"
-version = "0.4.13"
+version = "0.4.14"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "01cda141df6706de531b6c46c3a33ecca755538219bd484262fa09410c13539c"
+checksum = "78b3ae25bc7c8c38cec158d1f2757ee79e9b3740fbc7ccf0e59e4b08d793fa89"
 
 [[package]]
 name = "lock_api"
-version = "0.4.11"
+version = "0.4.12"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3c168f8615b12bc01f9c17e2eb0cc07dcae1940121185446edc3744920e8ef45"
+checksum = "07af8b9cdd281b7915f413fa73f29ebd5d55d0d3f0155584dade1ff18cea1b17"
 dependencies = [
  "autocfg",
  "scopeguard",
@@ -375,15 +363,15 @@ dependencies = [
 
 [[package]]
 name = "memchr"
-version = "2.7.1"
+version = "2.7.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "523dc4f511e55ab87b694dc30d0f820d60906ef06413f93d4d7a1385599cc149"
+checksum = "78ca9ab1a0babb1e7d5695e3530886289c18cf2f87ec19a575a0abdce112e3a3"
 
 [[package]]
 name = "miniz_oxide"
-version = "0.7.2"
+version = "0.7.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9d811f3e15f28568be3407c8e7fdb6514c1cda3cb30683f15b6a1a1dc4ea14a7"
+checksum = "b8a240ddb74feaf34a79a7add65a741f3167852fba007066dcac1ca548d89c08"
 dependencies = [
  "adler",
 ]
@@ -401,11 +389,10 @@ dependencies = [
 
 [[package]]
 name = "native-tls"
-version = "0.2.11"
+version = "0.2.12"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "07226173c32f2926027b63cce4bcd8076c3552846cbe7925f3aaffeac0a3b92e"
+checksum = "a8614eb2c83d59d1c8cc974dd3f920198647674a0a035e1af1fa58707e317466"
 dependencies = [
- "lazy_static",
  "libc",
  "log",
  "openssl",
@@ -419,9 +406,9 @@ dependencies = [
 
 [[package]]
 name = "object"
-version = "0.32.2"
+version = "0.36.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a6a622008b6e321afc04970976f62ee297fdbaa6f95318ca343e3eebb9648441"
+checksum = "576dfe1fc8f9df304abb159d767a29d0476f7750fbf8aa7ad07816004a207434"
 dependencies = [
  "memchr",
 ]
@@ -438,7 +425,7 @@ version = "0.10.64"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "95a0481286a310808298130d22dd1fef0fa571e05a8f44ec801801e84b216b1f"
 dependencies = [
- "bitflags 2.4.2",
+ "bitflags 2.6.0",
  "cfg-if",
  "foreign-types",
  "libc",
@@ -466,9 +453,9 @@ checksum = "ff011a302c396a5197692431fc1948019154afc178baf7d8e37367442a4601cf"
 
 [[package]]
 name = "openssl-sys"
-version = "0.9.101"
+version = "0.9.102"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "dda2b0f344e78efc2facf7d195d098df0dd72151b26ab98da807afc26c198dff"
+checksum = "c597637d56fbc83893a35eb0dd04b2b8e7a50c91e64e9493e398b5df4fb45fa2"
 dependencies = [
  "cc",
  "libc",
@@ -478,9 +465,9 @@ dependencies = [
 
 [[package]]
 name = "parking_lot"
-version = "0.12.1"
+version = "0.12.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3742b2c103b9f06bc9fff0a37ff4912935851bee6d36f3c02bcc755bcfec228f"
+checksum = "f1bf18183cf54e8d6059647fc3063646a1801cf30896933ec2311622cc4b9a27"
 dependencies = [
  "lock_api",
  "parking_lot_core",
@@ -488,15 +475,15 @@ dependencies = [
 
 [[package]]
 name = "parking_lot_core"
-version = "0.9.9"
+version = "0.9.10"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4c42a9226546d68acdd9c0a280d17ce19bfe27a46bf68784e4066115788d008e"
+checksum = "1e401f977ab385c9e4e3ab30627d6f26d00e2c73eef317493c4ec6d468726cf8"
 dependencies = [
  "cfg-if",
  "libc",
- "redox_syscall",
+ "redox_syscall 0.5.2",
  "smallvec",
- "windows-targets 0.48.5",
+ "windows-targets 0.52.5",
 ]
 
 [[package]]
@@ -525,9 +512,9 @@ dependencies = [
 
 [[package]]
 name = "pin-project-lite"
-version = "0.2.13"
+version = "0.2.14"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8afb450f006bf6385ca15ef45d71d2288452bc3683ce2e2cacc0d18e4be60b58"
+checksum = "bda66fc9667c18cb2758a2ac84d1167245054bcf85d5d1aaa6923f45801bdd02"
 
 [[package]]
 name = "pin-utils"
@@ -591,18 +578,18 @@ checksum = "5b40af805b3121feab8a3c29f04d8ad262fa8e0561883e7653e024ae4479e6de"
 
 [[package]]
 name = "proc-macro2"
-version = "1.0.78"
+version = "1.0.86"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e2422ad645d89c99f8f3e6b88a9fdeca7fabeac836b1002371c4367c8f984aae"
+checksum = "5e719e8df665df0d1c8fbfd238015744736151d4445ec0836b8e628aae103b77"
 dependencies = [
  "unicode-ident",
 ]
 
 [[package]]
 name = "quote"
-version = "1.0.35"
+version = "1.0.36"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "291ec9ab5efd934aaf503a6466c5d5251535d108ee747472c3977cc5acc868ef"
+checksum = "0fa76aaf39101c457836aec0ce2316dbdc3ab723cdda1c6bd4e6ad4208acaca7"
 dependencies = [
  "proc-macro2",
 ]
@@ -646,6 +633,15 @@ dependencies = [
  "bitflags 1.3.2",
 ]
 
+[[package]]
+name = "redox_syscall"
+version = "0.5.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "c82cf8cff14456045f55ec4241383baeff27af886adb72ffb2162f99911de0fd"
+dependencies = [
+ "bitflags 2.6.0",
+]
+
 [[package]]
 name = "rust-neon-example"
 version = "0.1.0"
@@ -658,17 +654,17 @@ dependencies = [
 
 [[package]]
 name = "rustc-demangle"
-version = "0.1.23"
+version = "0.1.24"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d626bb9dae77e28219937af045c257c28bfd3f69333c512553507f5f9798cb76"
+checksum = "719b953e2095829ee67db738b3bfa9fa368c94900df327b3f07fe6e794d2fe1f"
 
 [[package]]
 name = "rustix"
-version = "0.38.31"
+version = "0.38.34"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6ea3e1a662af26cd7a3ba09c0297a31af215563ecf42817c98df621387f4e949"
+checksum = "70dc5ec042f7a43c4a73241207cecc9873a06d45debb38b329f8541d85c2730f"
 dependencies = [
- "bitflags 2.4.2",
+ "bitflags 2.6.0",
  "errno",
  "libc",
  "linux-raw-sys",
@@ -692,11 +688,11 @@ checksum = "94143f37725109f92c262ed2cf5e59bce7498c01bcc1502d7b9afe439a4e9f49"
 
 [[package]]
 name = "security-framework"
-version = "2.9.2"
+version = "2.11.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "05b64fb303737d99b81884b2c63433e9ae28abebe5eb5045dcdd175dc2ecf4de"
+checksum = "c627723fd09706bacdb5cf41499e95098555af3c3c29d014dc3c458ef6be11c0"
 dependencies = [
- "bitflags 1.3.2",
+ "bitflags 2.6.0",
  "core-foundation",
  "core-foundation-sys",
  "libc",
@@ -705,9 +701,9 @@ dependencies = [
 
 [[package]]
 name = "security-framework-sys"
-version = "2.9.1"
+version = "2.11.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e932934257d3b408ed8f30db49d85ea163bfe74961f017f405b025af298f0c7a"
+checksum = "317936bbbd05227752583946b9e66d7ce3b489f84e11a94a510b4437fef407d7"
 dependencies = [
  "core-foundation-sys",
  "libc",
@@ -741,15 +737,15 @@ dependencies = [
 
 [[package]]
 name = "smallvec"
-version = "1.13.1"
+version = "1.13.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e6ecd384b10a64542d77071bd64bd7b231f4ed5940fba55e98c3de13824cf3d7"
+checksum = "3c5e1a9a646d36c3599cd173a41282daf47c44583ad367b8e6837255952e5c67"
 
 [[package]]
 name = "socket2"
-version = "0.5.6"
+version = "0.5.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "05ffd9c0a93b7543e062e759284fcf5f5e3b098501104bfbdde4d404db792871"
+checksum = "ce305eb0b4296696835b71df73eb912e0f1ffd2556a501fcede6e0c50349191c"
 dependencies = [
  "libc",
  "windows-sys 0.52.0",
@@ -757,26 +753,26 @@ dependencies = [
 
 [[package]]
 name = "stringprep"
-version = "0.1.4"
+version = "0.1.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bb41d74e231a107a1b4ee36bd1214b11285b77768d2e3824aedafa988fd36ee6"
+checksum = "7b4df3d392d81bd458a8a621b8bffbd2302a12ffe288a9d931670948749463b1"
 dependencies = [
- "finl_unicode",
  "unicode-bidi",
  "unicode-normalization",
+ "unicode-properties",
 ]
 
 [[package]]
 name = "subtle"
-version = "2.5.0"
+version = "2.6.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "81cdd64d312baedb58e21336b31bc043b77e01cc99033ce76ef539f78e965ebc"
+checksum = "13c2bddecc57b384dee18652358fb23172facb8a2c51ccc10d74c157bdea3292"
 
 [[package]]
 name = "syn"
-version = "2.0.52"
+version = "2.0.68"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b699d15b36d1f02c3e7c69f8ffef53de37aefae075d8488d4ba1a7788d574a07"
+checksum = "901fa70d88b9d6c98022e23b4136f9f3e54e4662c3bc1bd1d84a42a9a0f0c1e9"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -797,9 +793,9 @@ dependencies = [
 
 [[package]]
 name = "tinyvec"
-version = "1.6.0"
+version = "1.6.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "87cc5ceb3875bb20c2890005a4e226a4651264a5c75edb2421b52861a0a0cb50"
+checksum = "c55115c6fbe2d2bef26eb09ad74bde02d8255476fc0c7b515ef09fbb35742d82"
 dependencies = [
  "tinyvec_macros",
 ]
@@ -812,9 +808,9 @@ checksum = "1f3ccbac311fea05f86f61904b462b55fb3df8837a366dfc601a0161d0532f20"
 
 [[package]]
 name = "tokio"
-version = "1.36.0"
+version = "1.38.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "61285f6515fa018fb2d1e46eb21223fff441ee8db5d0f1435e8ab4f5cdb80931"
+checksum = "ba4f4a02a7a80d6f274636f0aa95c7e383b912d41fe721a31f29e29698585a4a"
 dependencies = [
  "backtrace",
  "bytes",
@@ -828,9 +824,9 @@ dependencies = [
 
 [[package]]
 name = "tokio-macros"
-version = "2.2.0"
+version = "2.3.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5b8a1e28f2deaa14e508979454cb3a223b10b938b45af148bc0986de36f1923b"
+checksum = "5f5ae998a069d4b5aba8ee9dad856af7d520c3699e6159b185c2acd48155d39a"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -875,35 +871,15 @@ dependencies = [
 
 [[package]]
 name = "tokio-util"
-version = "0.7.10"
+version = "0.7.11"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5419f34732d9eb6ee4c3578b7989078579b7f039cbbb9ca2c4da015749371e15"
+checksum = "9cf6b47b3771c49ac75ad09a6162f53ad4b8088b76ac60e8ec1455b31a189fe1"
 dependencies = [
  "bytes",
  "futures-core",
  "futures-sink",
  "pin-project-lite",
  "tokio",
- "tracing",
-]
-
-[[package]]
-name = "tracing"
-version = "0.1.40"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c3523ab5a71916ccf420eebdf5521fcef02141234bbc0b8a49f2fdc4544364ef"
-dependencies = [
- "pin-project-lite",
- "tracing-core",
-]
-
-[[package]]
-name = "tracing-core"
-version = "0.1.32"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c06d3da6113f116aaee68e4d601191614c9053067f9ab7f6edbcb161237daa54"
-dependencies = [
- "once_cell",
 ]
 
 [[package]]
@@ -933,6 +909,12 @@ dependencies = [
  "tinyvec",
 ]
 
+[[package]]
+name = "unicode-properties"
+version = "0.1.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "e4259d9d4425d9f0661581b804cb85fe66a4c631cadd8f490d1c13a35d5d9291"
+
 [[package]]
 name = "vcpkg"
 version = "0.2.15"
@@ -1023,11 +1005,11 @@ dependencies = [
 
 [[package]]
 name = "whoami"
-version = "1.5.0"
+version = "1.5.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0fec781d48b41f8163426ed18e8fc2864c12937df9ce54c88ede7bd47270893e"
+checksum = "a44ab49fad634e88f55bf8f9bb3abd2f27d7204172a112c7c9987e01c1c94ea9"
 dependencies = [
- "redox_syscall",
+ "redox_syscall 0.4.1",
  "wasite",
  "web-sys",
 ]
@@ -1047,7 +1029,7 @@ version = "0.52.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "282be5f36a8ce781fad8c8ae18fa3f9beff57ec1b52cb3de0789201425d9a33d"
 dependencies = [
- "windows-targets 0.52.4",
+ "windows-targets 0.52.5",
 ]
 
 [[package]]
@@ -1067,17 +1049,18 @@ dependencies = [
 
 [[package]]
 name = "windows-targets"
-version = "0.52.4"
+version = "0.52.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7dd37b7e5ab9018759f893a1952c9420d060016fc19a472b4bb20d1bdd694d1b"
+checksum = "6f0713a46559409d202e70e28227288446bf7841d3211583a4b53e3f6d96e7eb"
 dependencies = [
- "windows_aarch64_gnullvm 0.52.4",
- "windows_aarch64_msvc 0.52.4",
- "windows_i686_gnu 0.52.4",
- "windows_i686_msvc 0.52.4",
- "windows_x86_64_gnu 0.52.4",
- "windows_x86_64_gnullvm 0.52.4",
- "windows_x86_64_msvc 0.52.4",
+ "windows_aarch64_gnullvm 0.52.5",
+ "windows_aarch64_msvc 0.52.5",
+ "windows_i686_gnu 0.52.5",
+ "windows_i686_gnullvm",
+ "windows_i686_msvc 0.52.5",
+ "windows_x86_64_gnu 0.52.5",
+ "windows_x86_64_gnullvm 0.52.5",
+ "windows_x86_64_msvc 0.52.5",
 ]
 
 [[package]]
@@ -1088,9 +1071,9 @@ checksum = "2b38e32f0abccf9987a4e3079dfb67dcd799fb61361e53e2882c3cbaf0d905d8"
 
 [[package]]
 name = "windows_aarch64_gnullvm"
-version = "0.52.4"
+version = "0.52.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bcf46cf4c365c6f2d1cc93ce535f2c8b244591df96ceee75d8e83deb70a9cac9"
+checksum = "7088eed71e8b8dda258ecc8bac5fb1153c5cffaf2578fc8ff5d61e23578d3263"
 
 [[package]]
 name = "windows_aarch64_msvc"
@@ -1100,9 +1083,9 @@ checksum = "dc35310971f3b2dbbf3f0690a219f40e2d9afcf64f9ab7cc1be722937c26b4bc"
 
 [[package]]
 name = "windows_aarch64_msvc"
-version = "0.52.4"
+version = "0.52.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "da9f259dd3bcf6990b55bffd094c4f7235817ba4ceebde8e6d11cd0c5633b675"
+checksum = "9985fd1504e250c615ca5f281c3f7a6da76213ebd5ccc9561496568a2752afb6"
 
 [[package]]
 name = "windows_i686_gnu"
@@ -1112,9 +1095,15 @@ checksum = "a75915e7def60c94dcef72200b9a8e58e5091744960da64ec734a6c6e9b3743e"
 
 [[package]]
 name = "windows_i686_gnu"
-version = "0.52.4"
+version = "0.52.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b474d8268f99e0995f25b9f095bc7434632601028cf86590aea5c8a5cb7801d3"
+checksum = "88ba073cf16d5372720ec942a8ccbf61626074c6d4dd2e745299726ce8b89670"
+
+[[package]]
+name = "windows_i686_gnullvm"
+version = "0.52.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "87f4261229030a858f36b459e748ae97545d6f1ec60e5e0d6a3d32e0dc232ee9"
 
 [[package]]
 name = "windows_i686_msvc"
@@ -1124,9 +1113,9 @@ checksum = "8f55c233f70c4b27f66c523580f78f1004e8b5a8b659e05a4eb49d4166cca406"
 
 [[package]]
 name = "windows_i686_msvc"
-version = "0.52.4"
+version = "0.52.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1515e9a29e5bed743cb4415a9ecf5dfca648ce85ee42e15873c3cd8610ff8e02"
+checksum = "db3c2bf3d13d5b658be73463284eaf12830ac9a26a90c717b7f771dfe97487bf"
 
 [[package]]
 name = "windows_x86_64_gnu"
@@ -1136,9 +1125,9 @@ checksum = "53d40abd2583d23e4718fddf1ebec84dbff8381c07cae67ff7768bbf19c6718e"
 
 [[package]]
 name = "windows_x86_64_gnu"
-version = "0.52.4"
+version = "0.52.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5eee091590e89cc02ad514ffe3ead9eb6b660aedca2183455434b93546371a03"
+checksum = "4e4246f76bdeff09eb48875a0fd3e2af6aada79d409d33011886d3e1581517d9"
 
 [[package]]
 name = "windows_x86_64_gnullvm"
@@ -1148,9 +1137,9 @@ checksum = "0b7b52767868a23d5bab768e390dc5f5c55825b6d30b86c844ff2dc7414044cc"
 
 [[package]]
 name = "windows_x86_64_gnullvm"
-version = "0.52.4"
+version = "0.52.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "77ca79f2451b49fa9e2af39f0747fe999fcda4f5e241b2898624dca97a1f2177"
+checksum = "852298e482cd67c356ddd9570386e2862b5673c85bd5f88df9ab6802b334c596"
 
 [[package]]
 name = "windows_x86_64_msvc"
@@ -1160,6 +1149,6 @@ checksum = "ed94fce61571a4006852b7389a063ab983c02eb1bb37b47f8272ce92d06d9538"
 
 [[package]]
 name = "windows_x86_64_msvc"
-version = "0.52.4"
+version = "0.52.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "32b752e52a2da0ddfbdbcc6fceadfeede4c939ed16d13e648833a61dfb611ed8"
+checksum = "bec47e5bfd1bff0eeaf6d8b485cc1074891a197ab4225d504cb7a1ab88b02bf0"

test_runner/pg_clients/rust/tokio-postgres/Cargo.toml

@@ -7,9 +7,9 @@ publish = false
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
 
 [dependencies]
-native-tls = "0.2.11"
+native-tls = "0.2.12"
 postgres-native-tls = "0.5.0"
-tokio = { version = "1.36", features=["rt", "macros"] }
+tokio = { version = "1.38", features=["rt", "macros"] }
 tokio-postgres = "0.7.10"
 
 

test_runner/pg_clients/rust/tokio-postgres/Dockerfile

@@ -1,4 +1,4 @@
-FROM rust:1.76
+FROM rust:1.79
 WORKDIR /source
 
 COPY . .

test_runner/pg_clients/swift/PostgresClientKitExample/Dockerfile

@@ -1,11 +1,11 @@
-FROM swift:5.9 AS build
+FROM swift:5.10 AS build
 RUN apt-get -q update && apt-get -q install -y libssl-dev
 WORKDIR /source
 
 COPY . .
 RUN swift build --configuration release
 
-FROM swift:5.9
+FROM swift:5.10
 WORKDIR /app
 COPY --from=build /source/.build/release .
 CMD ["/app/PostgresClientKitExample"]

test_runner/pg_clients/swift/PostgresClientKitExample/Package.resolved

@@ -1,4 +1,5 @@
 {
+  "originHash" : "8eff8c577ba246ce7824d3434839acefced2b1a1d2b1ad700554502538a50558",
   "pins" : [
     {
       "identity" : "bluesocket",
@@ -18,15 +19,6 @@
         "version" : "2.0.2"
       }
     },
-    {
-      "identity" : "openssl",
-      "kind" : "remoteSourceControl",
-      "location" : "https://github.com/Kitura/OpenSSL.git",
-      "state" : {
-        "revision" : "5dc8cb4f971135c17343e3c6df4f28904a0600e2",
-        "version" : "2.3.1"
-      }
-    },
     {
       "identity" : "postgresclientkit",
       "kind" : "remoteSourceControl",
@@ -37,5 +29,5 @@
       }
     }
   ],
-  "version" : 2
+  "version" : 3
 }

test_runner/pg_clients/swift/PostgresClientKitExample/Package.swift

@@ -1,4 +1,4 @@
-// swift-tools-version:5.8
+// swift-tools-version:5.10
 import PackageDescription
 
 let package = Package(

test_runner/pg_clients/swift/PostgresNIOExample/Dockerfile

@@ -1,10 +1,10 @@
-FROM swift:5.9 AS build
+FROM swift:5.10 AS build
 WORKDIR /source
 
 COPY . .
 RUN swift build --configuration release
 
-FROM swift:5.9
+FROM swift:5.10
 WORKDIR /app
 COPY --from=build /source/.build/release .
 CMD ["/app/PostgresNIOExample"]

test_runner/pg_clients/swift/PostgresNIOExample/Package.resolved

@@ -1,12 +1,22 @@
 {
+  "originHash" : "11b5dcece349a3e56a7a9a7d0af6d0f5b83dff321b43124a01b158ed7aac5302",
   "pins" : [
     {
       "identity" : "postgres-nio",
       "kind" : "remoteSourceControl",
       "location" : "https://github.com/vapor/postgres-nio.git",
       "state" : {
-        "revision" : "69ccfdf4c80144d845e3b439961b7ec6cd7ae33f",
-        "version" : "1.20.2"
+        "revision" : "5c268768890b062803a49f1358becc478f954265",
+        "version" : "1.21.5"
+      }
+    },
+    {
+      "identity" : "swift-async-algorithms",
+      "kind" : "remoteSourceControl",
+      "location" : "https://github.com/apple/swift-async-algorithms.git",
+      "state" : {
+        "revision" : "da4e36f86544cdf733a40d59b3a2267e3a7bbf36",
+        "version" : "1.0.0"
       }
     },
     {
@@ -81,6 +91,15 @@
         "version" : "1.20.1"
       }
     },
+    {
+      "identity" : "swift-service-lifecycle",
+      "kind" : "remoteSourceControl",
+      "location" : "https://github.com/swift-server/swift-service-lifecycle.git",
+      "state" : {
+        "revision" : "d58e6bf2b1ae2884cf204a8b5bcaaa7aae3c1ff0",
+        "version" : "2.6.0"
+      }
+    },
     {
       "identity" : "swift-system",
       "kind" : "remoteSourceControl",
@@ -91,5 +110,5 @@
       }
     }
   ],
-  "version" : 2
+  "version" : 3
 }