The LSN lease api actually accepts a tenant_shard_id, not a tenant_id.
But we put the Display of the tenant_shard_id into the tenant_id field.
This PR fixes it.
Refs
- fixes https://databricks.atlassian.net/browse/LKB-2930
## Problem
close LKB-253
## Summary of changes
404 for timeline requests could happen when the tenant is intended to be
on a pageserver but not attached yet. This patch adds handling for the
lease request. In the future, we should extend this handling to more
operations.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Safekeeper and pageserver metrics collection might time out. We've seen
this in both hadron and neon.
## Summary of changes
This PR moves metrics collection in PS/SK to the background so that we
will always get some metrics, despite there may be some delays. Will
leave it to the future work to reduce metrics collection time.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
The gRPC client pools don't reap idle resources.
Touches #11735.
Requires #12475.
## Summary of changes
Reap idle pool resources (channels/clients/streams) after 3 minutes of
inactivity.
Also restructure the `StreamPool` to use a mutex rather than atomics for
synchronization, for simplicity. This will be optimized later.
This PR introduces a `image_creation_timeout` to page servers so that we
can force the image creation after a certain period. This is set to 1
day on dev/staging for now, and will rollout to production 1/2 weeks
later.
Majority of the PR are boilerplate code to add the new knob. Specific
changes of the PR are:
1. During L0 compaction, check if we should force a compaction if
min(LSN) of all delta layers < force_image_creation LSN.
2. During image creation, check if we should force a compaction if the
image's LSN < force_image_creation LSN and there are newer deltas with
overlapping key ranges.
3. Also tweaked the check image creation interval to make sure we honor
image_creation_timeout.
Vlad's note: This should be a no-op. I added an extra PS config for the
large timeline
threshold to enable this.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
When a function is owned by a superuser (bootstrap user or otherwise),
we consider it safe to run it. Only a superuser could have installed it,
typically from CREATE EXTENSION script: we trust the code to execute.
## Problem
This is intended to solve running pg_graphql Event Triggers
graphql_watch_ddl and graphql_watch_drop which are executing the secdef
function graphql.increment_schema_version().
## Summary of changes
Allow executing Event Trigger function owned by a superuser and with
SECURITY DEFINER properties. The Event Trigger code runs with superuser
privileges, and we consider that it's fine.
---------
Co-authored-by: Tristan Partin <tristan.partin@databricks.com>
There are a couple of places that call `CompactionError::is_cancel` but
don't check the `::Other` variant via downcasting for root cause being
cancellation.
The only place that does it is `log_compaction_error`.
It's sad we have to do it, but, until we get around cleaning up all the
culprits,
a step forward is to unify the behavior so that all places that inspect
a
`CompactionError` for cancellation reason follow the same behavior.
Thus, this PR ...
- moves the downcasting checks against the `::Other` variant from
`log_compaction_error` into `is_cancel()` and
- enforces via type system that `.is_cancel()` is used to check whether
a CompactionError is due to cancellation (matching on the
`CompactionError::ShuttingDown` will cause a compile-time error).
I don't think there's a _serious_ case right now where matching instead
of using `is_cancel` causes problems.
The worst case I could find is the circuit breaker and
`compaction_failed`,
which don't really matter if we're shutting down the timeline anyway.
But it's unaesthetic and might cause log/alert noise down the line,
so, this PR fixes that at least.
Refs
- https://databricks.atlassian.net/browse/LKB-182
- slack conversation about this PR:
https://databricks.slack.com/archives/C09254R641L/p1751284317955159
## Problem
close LKB-199
## Summary of changes
We always return the error as 500 to the cplane if a LSN lease request
fails. This cause issues for the cplane as they don't retry on 500. This
patch correctly passes through the error and assign the error code so
that cplane can know if it is a retryable error. (TODO: look at the
cplane code and learn the retry logic).
Note that this patch does not resolve LKB-253 -- we need to handle not
found error separately in the lsn lease path, like wait until the tenant
gets attached, or return 503 so that cplane can retry.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Change the unreliable storage wrapper to fail by probability when there
are more failure attempts left.
Co-authored-by: Yecheng Yang <carlton.yang@databricks.com>
## Problem
Test `test_branch_creation_before_gc` is flaky in the internal repo.
Pageserver sometimes lags behind write LSN. When we call GC it might not
reach the LSN we try to create the branch at yet.
## Summary of changes
- Wait till flush lsn on pageserver reaches the latest LSN before
calling GC.
## Problem
GetPage bulk requests such as prefetches and vacuum can head-of-line
block foreground requests, causing increased latency.
Touches #11735.
Requires #12469.
## Summary of changes
* Use dedicated channel/client/stream pools for bulk GetPage requests.
* Use lower concurrency but higher queue depth for bulk pools.
* Make pool limits configurable.
* Require unbounded client pool for stream pool, to avoid accidental
starvation.
## Problem
Follow up of #12400
## Summary of changes
We didn't set remote_size_mb to Some when initialized so it never gets
computed :(
Also added a new API to force refresh the properties.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Due to a lag in replication, we sometimes cannot get the parent branch
definition just after completion of the Public API restore call. This
leads to the test failures.
https://databricks.atlassian.net/browse/LKB-279
## Summary of changes
The workaround is implemented. Now test retries up to 30 seconds,
waiting for the branch definition to appear.
---------
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
As discovered in https://github.com/neondatabase/neon/issues/12394,
test_multiple_subscription_branching generates skewed data distribution,
that leads to test failures when the unevenly filled last table receives
even more data.
for table t0: pub_res = (42001,), sub_res = (42001,)
for table t1: pub_res = (29001,), sub_res = (29001,)
for table t2: pub_res = (21001,), sub_res = (21001,)
for table t3: pub_res = (21001,), sub_res = (21001,)
for table t4: pub_res = (1711001,), sub_res = (1711001,)
## Summary of changes
Fix the name of the workload parameter to generate data as expected.
## Problem
The rich gRPC Pageserver client needs to split GetPage batches that
straddle multiple shards.
Touches #11735.
Requires #12462.
## Summary of changes
Adds a `GetPageSplitter` which splits `GetPageRequest` that span
multiple shards, and then reassembles the responses. Dispatches
per-shard requests in parallel.
## Problem
See [Slack
Channel](https://databricks.enterprise.slack.com/archives/C091LHU6NNB)
Dropping connection without resetting prefetch state can cause
request/response mismatch.
And lack of check response correctness in communicator_prefetch_lookupv
can cause data corruption.
## Summary of changes
1. Validate response before assignment to prefetch slot.
2. Consume prefetch requests before sending any other requests.
---------
Co-authored-by: Kosntantin Knizhnik <konstantin.knizhnik@databricks.com>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The `--timelines-onto-safekeepers` flag is very consequential in the
sense that it controls every single timeline creation. However, we don't
have any automatic insight whether enabling the option will break things
or not.
The main way things can break is by misconfigured safekeepers, say they
are marked as paused in the storcon db. The best input so far we can
obtain via manually connecting via storcon_cli and listing safekeepers,
but this is cumbersome and manual so prone to human error.
So at storcon startup, do a simulated "test creation" in which we call
`timelines_onto_safekeepers` with the configuration provided to us, and
print whether it was successful or not. No actual timeline is created,
and nothing is written into the storcon db. The heartbeat info will not
have reached us at that point yet, but that's okay, because we still
fall back to safekeepers that don't have any heartbeat.
Also print some general scheduling policy stats on initial safekeeper
load.
Part of #11670.
## Problem
For the communicator, we need a rich Pageserver gRPC client.
Touches #11735.
Requires #12434.
## Summary of changes
This patch adds an initial rich Pageserver gRPC client. It supports:
* Sharded tenants across multiple Pageservers.
* Pooling of connections, clients, and streams for efficient resource
use.
* Concurrent use by many callers.
* Internal handling of GetPage bidirectional streams, with pipelining
and error handling.
* Automatic retries.
* Observability.
The client is still under development. In particular, it needs GetPage
batch splitting, shard map updates, and performance optimization. This
will be addressed in follow-up PRs.
