## Problem
The allure report finishes with the error `HttpError: Resource not
accessible by integration` while running the `pg_regress` test against a
cloud staging project due to a lack of permissions.
## Summary of changes
The permissions are added.
## Problem
It is unreliable for the control plane to infer the AZ for computes from
where the tenant is currently attached, because if a tenant happens to
be in a degraded state or a release is ongoing while a compute starts,
then the tenant's attached AZ can be a different one to where it will
run long-term, and the control plane doesn't check back later to restart
the compute.
This can land in parallel with
https://github.com/neondatabase/neon/pull/9947
## Summary of changes
- Thread through the preferred AZ into the compute hook code via the
reconciler
- Include the preferred AZ in the body of compute hook notifications
## Problem
Jemalloc heap profiles aren't symbolized. This is inconvenient, and
doesn't work with Grafana Cloud Profiles.
Resolves#9964.
## Summary of changes
Symbolize the heap profiles in-process, and strip unnecessary cruft.
This uses about 100 MB additional memory to cache the DWARF information,
but I believe this is already the case with CPU profiles, which use the
same library for symbolization. With cached DWARF information, the
symbolization CPU overhead is negligible.
Example profiles:
*
[pageserver.pb.gz](https://github.com/user-attachments/files/18141395/pageserver.pb.gz)
*
[safekeeper.pb.gz](https://github.com/user-attachments/files/18141396/safekeeper.pb.gz)
Don't build tests in h3 and rdkit: ~15 min speedup.
Use Ninja as cmake generator where possible: ~10 min speedup.
Clean apt cache for smaller images: around 250mb size loss for
intermediate layers
## Problem
It was reported as `gauge`, but it's actually a `counter`.
Also add `_total` suffix as that's the convention for counters.
The corresponding flux-fleet PR:
https://github.com/neondatabase/flux-fleet/pull/386
## Problem
The ABS SDK's default behavior is to do no connection pooling, i.e. open
and close a fresh connection for each request. Under high request rates,
this can result in an accumulation of TCP connections in TIME_WAIT or
CLOSE_WAIT state, and in extreme cases exhaustion of client ports.
Related: https://github.com/neondatabase/cloud/issues/20971
## Summary of changes
- Add a configurable `conn_pool_size` parameter for Azure storage,
defaulting to zero (current behavior)
- Construct a custom reqwest client using this connection pool size.
## Problem
It's impossible to run docker compose with compute v17 due to `pg_anon`
extension which is not supported under PG17.
## Summary of changes
The auto-loading of `pg_anon` is disabled by default
## Problem
To debug issues with TLS connections there's no easy way to decrypt
packets unless a client has special support for logging the keys.
## Summary of changes
Add TLS session keys logging to proxy via `SSLKEYLOGFILE` env var gated
by flag.
As the title says, I updated the lint rules to no longer allow unwrap or
unimplemented.
Three special cases:
* Tests are allowed to use them
* std::sync::Mutex lock().unwrap() is common because it's usually
correct to continue panicking on poison
* `tokio::spawn_blocking(...).await.unwrap()` is common because it will
only error if the blocking fn panics, so continuing the panic is also
correct
I've introduced two extension traits to help with these last two, that
are a bit more explicit so they don't need an expect message every time.
## Problem
We've had similar test in test_logical_replication, but then removed it
because it wasn't needed to trigger LR related bug. Restarting at WAL
page boundary is still a useful test, so add it separately back.
## Summary of changes
Add the test.
## Problem
We want to use safekeeper http client in storage controller and
neon_local.
## Summary of changes
Extract it to separate crate. No functional changes.
## Problem
While reviewing #10152 I found it tricky to actually determine whether
the connection used `allow_self_signed_compute` or not.
I've tried to remove this setting in the past:
* https://github.com/neondatabase/neon/pull/7884
* https://github.com/neondatabase/neon/pull/7437
* https://github.com/neondatabase/cloud/pull/13702
But each time it seems it is used by e2e tests
## Summary of changes
The `node_info.allow_self_signed_computes` is always initialised to
false, and then sometimes inherits the proxy config value. There's no
need this needs to be in the node_info, so removing it and propagating
it via `TcpMechansim` is simpler.
## Problem
Changes in #9786 were functionally complete but missed some edges that
made testing less robust than it should have been:
- `is_key_disposable` didn't consider SLRU dir keys disposable
- Timeline `init_empty` was always creating SLRU dir keys on all shards
The result was that when we had a bug
(https://github.com/neondatabase/neon/pull/10080), it wasn't apparent in
tests, because one would only encounter the issue if running on a
long-lived timeline with enough compaction to drop the initially created
empty SLRU dir keys, _and_ some CLog truncation going on.
Closes: https://github.com/neondatabase/cloud/issues/21516
## Summary of changes
- Update is_key_global and init_empty to handle SLRU dir keys properly
-- the only functional impact is that we avoid writing some spurious
keys in shards >0, but this makes testing much more robust.
- Make `test_clog_truncate` explicitly use a sharded tenant
The net result is that if one reverts #10080, then tests fail (i.e. this
PR is a reproducer for the issue)
## Problem
In #8550, we made the flush loop wait for uploads after every layer.
This was to avoid unbounded buildup of uploads, and to reduce compaction
debt. However, the approach has several problems:
* It prevents upload parallelism.
* It prevents flush and upload pipelining.
* It slows down ingestion even when there is no need to backpressure.
* It does not directly backpressure WAL ingestion (only via
`disk_consistent_lsn`), and will build up in-memory layers.
* It does not directly backpressure based on compaction debt and read
amplification.
An alternative solution to these problems is proposed in #8390.
In the meanwhile, we revert the change to reduce the impact on ingest
throughput. This does reintroduce some risk of unbounded
upload/compaction buildup. Until
https://github.com/neondatabase/neon/issues/8390, this can be addressed
in other ways:
* Use `max_replication_apply_lag` (aka `remote_consistent_lsn`), which
will more directly limit upload debt.
* Shard the tenant, which will spread the flush/upload work across more
Pageservers and move the bottleneck to Safekeeper.
Touches #10095.
## Summary of changes
Remove waiting on the upload queue in the flush loop.
## Problem
When entry was dropped and password wasn't set, new entry
had uninitialized memory in controlplane adapter
Resolves: https://github.com/neondatabase/cloud/issues/14914
## Summary of changes
Initialize password in all cases, add tests.
Minor formatting for less indentation
## Problem
`benchmarking` job fails because `aws-oicd-role-arn` input is not set
## Summary of changes:
- Set `aws-oicd-role-arn` for `benchmarking job
- Always require `aws-oicd-role-arn` to be set
- Rename `aws_oicd_role_arn` to `aws-oicd-role-arn` for consistency
## Problem
close https://github.com/neondatabase/neon/issues/10124
gc-compaction split_gc_jobs is holding the repartition lock for too long
time.
## Summary of changes
* Ensure split_gc_compaction_jobs drops the repartition lock once it
finishes cloning the structures.
* Update comments.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Improved comments will help others when they read the code, and the log
messages will help others understand why the logical replication monitor
works the way it does.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
LFC used_pages statistic is not updated in case of LFC resize (shrinking
`neon.file_cache_size_limit`)
## Summary of changes
Update `lfc_ctl->used_pages` in `lfc_change_limit_hook`
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The test was failing with the scary but generic message `Remote storage
metadata corrupted`.
The underlying scrubber error is `Orphan layer detected: ...`.
The test kills pageserver at random points, hence it's expected that we
leak layers if we're killed in the window after layer upload but before
it's referenced from index part.
Refer to generation numbers RFC for details.
Refs:
- fixes https://github.com/neondatabase/neon/issues/9988
- root-cause analysis
https://github.com/neondatabase/neon/issues/9988#issuecomment-2520673167
## Problem
`test_prefetch` is flaky
(https://github.com/neondatabase/neon/issues/9961), but if it passes,
the run time is less than 30 seconds — we don't need an extended timeout
for it.
## Summary of changes
- Remove extended test timeout for `test_prefetch`
## Problem
We want to extract safekeeper http client to separate crate for use in
storage controller and neon_local. However, many types used in the API
are internal to safekeeper.
## Summary of changes
Move them to safekeeper_api crate. No functional changes.
ref https://github.com/neondatabase/neon/issues/9011
## Problem
When moving the comment on proxy-releases from the yaml doc into a
javascript code block, I missed converting the comment marker from `#`
to `//`.
## Summary of changes
Correctly convert comment marker.
## Problem
I've noticed that debug builds with LFC fail more frequently and for
some reason ,their failure do block merging (but it should not)
## Summary of changes
- Do not run Debug builds with LFC
## Problem
When we update our scheduler/optimization code to respect AZs properly
(https://github.com/neondatabase/neon/pull/9916), the choice of AZ
becomes a much higher-stakes decision. We will pretty much always run a
tenant in its preferred AZ, and that AZ is fixed for the lifetime of the
tenant (unless a human intervenes)
Eventually, when we do auto-balancing based on utilization, I anticipate
that part of that will be to automatically change the AZ of tenants if
our original scheduling decisions have caused imbalance, but as an
interim measure, we can at least avoid making this scheduling decision
based purely on which AZ contains the emptiest node.
This is a precursor to https://github.com/neondatabase/neon/pull/9947
## Summary of changes
- When creating a tenant, instead of scheduling a shard and then reading
its preferred AZ back, make the AZ decision first.
- Instead of choosing AZ based on which node is emptiest, use the median
utilization of nodes in each AZ to pick the AZ to use. This avoids bad
AZ decisions during periods when some node has very low utilization
(such as after replacing a dead node)
I considered also making the selection a weighted pseudo-random choice
based on utilization, but wanted to avoid destabilising tests with that
for now.
## Problem
Now notifications about failures in `pg_regress` tests run on the
staging cloud instance, reach the channel `on-call-staging-stream`,
while they should reach `on-call-qa-staging-stream`
## Summary of changes
The channel changed.
## Problem
CI currently uses static credentials in some places. These are less
secure and hard to maintain, so we are going to deprecate them and use
OIDC auth.
## Summary of changes
- ci(fix): Use OIDC auth to upload artifact on s3
- ci(fix): Use OIDC auth to login on ECR
## Problem
Now that https://github.com/neondatabase/cloud/issues/15245 is done, we
can remove the old code.
## Summary of changes
Removes support for the ManagementV2 API, in favour of the ProxyV1 API.
## Problem
To give Storage more time on preprod — create a release branch on Friday
## Summary of changes
- Automatically create Storage release PR on Friday instead of Monday
This adds an API to the storage controller to list safekeepers
registered to it.
This PR does a `diesel print-schema > storage_controller/src/schema.rs`
because of an inconsistency between up.sql and schema.rs, introduced by
[this](2c142f14f7)
commit, so there is some updates of `schema.rs` due to that. As a
followup to this, we should maybe think about running `diesel
print-schema` in CI.
Part of #9981
## Problem
`test_check_visibility_map` has been seen to time out in debug tests.
## Summary of changes
Bump the timeout to 10 minutes (test reports indicate 7 minutes is
sufficient).
We don't want to disable the test entirely in debug builds, to exercise
this with debug assertions enabled.
Resolves#10069.
This adds some validation of invariants that we want to uphold wrt the
tenant manifest and `index_part.json`:
* the data the manifest has about a timeline must match with the data in
`index_part.json`. It might actually change, e.g. when we do reparenting
during detach ancestor, but that requires the timeline to be
unoffloaded, i.e. removed from the manifest.
* any timeline mentioned in index part, must, if present, be archived.
If we unarchive, we first update the tenant manifest to unoffload, and
only then update index part. And one needs to archive before offloading.
* it is legal for timelines to be mentioned in the manifest but have no
`index_part`: this is a temporary state visible during deletion of the
timeline. if the pageserver crashed, an attach of the tenant will clean
the state up.
* it is also legal for offloaded timelines to have an
`ancestor_retain_lsn` of None while having an `ancestor_timeline_id`.
This is for the to-be-added flattening functionality: the plan is to set
former to None if we have flattened a timeline.
follow-up of #9942
part of #8088
## Problem
We saw the drain/fill operations not drain fast enough in ap-southeast.
## Summary of changes
These are some quick changes to speed it up:
* double reconcile concurrency - this is now half of the available
reconcile bandwidth
* reduce the waiter polling timeout - this way we can spawn new
reconciliations faster
## Problem
Cplane and storage controller tenant config changes are not additive.
Any change overrides all existing tenant configs. This would be fine if
both did client side patching, but that's not the case.
Once this merges, we must update cplane to use the PATCH endpoint.
## Summary of changes
### High Level
Allow for patching of tenant configuration with a `PATCH
/v1/tenant/config` endpoint.
It takes the same data as it's PUT counterpart. For example the payload
below will update `gc_period` and unset `compaction_period`. All other
fields are left in their original state.
```
{
"tenant_id": "1234",
"gc_period": "10s",
"compaction_period": null
}
```
### Low Level
* PS and storcon gain `PATCH /v1/tenant/config` endpoints. PS endpoint
is only used for cplane managed instances.
* `storcon_cli` is updated to have separate commands for
`set-tenant-config` and `patch-tenant-config`
Related https://github.com/neondatabase/cloud/issues/21043
add owned_by_superuser field to filter out system extensions.
While on it, also correct related code:
- fix the metric setting: use set() instead of inc() in a loop.
inc() is not idempotent and can lead to incorrect results
if the function called multiple times. Currently it is only called at
compute start, but this will change soon.
- fix the return type of the installed_extensions endpoint
to match the metric. Currently it is only used in the test.
## Problem
Linking walproposer library (e.g. `cargo t`) produces linker errors:
/home/myrrc/neon/pgxn/neon/walproposer_compat.c:169: undefined reference
to `pg_snprintf'
The library with these symbols (libpgcommon.a) is present
## Summary of changes
Changed order of libraries resolution for linker
## Problem
We added support for LFC for tests but are still using it only for the
PG17 release.
## Summary of changes
LFC is enabled for all PG versions. Errors in tests with LFC enabled now
block merging as usual. We keep tests with disabled LFC for PG17
release. Tests on debug builds with LFC enabled still don't affect
permission to merge.
## Problem
If the control plane cannot be reached for some reason, compute_ctl
panics
## Summary of changes
panic is removed in favour of returning an error.
Code is reformatted a bit for more flat control flow
Resolves: #5391
## Problem
We get slru truncation commands on non-zero shards.
Compaction will drop the slru dir keys and ingest will fail when
receiving such records.
https://github.com/neondatabase/neon/pull/10080 fixed it for clog, but
not for multixact.
## Summary of changes
Only truncate multixact slrus on shard zero. I audited the rest of the
ingest code and it looks
fine from this pov.
## Problem
With pipelining enabled, the time a request spends in the batcher stage
counts towards the smgr op latency.
If pipelining is disabled, that time is not accounted for.
In practice, this results in a jump in smgr getpage latencies in various
dashboards and degrades the internal SLO.
## Solution
In a similar vein to #10042 and with a similar rationale, this PR stops
counting the time spent in batcher stage towards smgr op latency.
The smgr op latency metric is reduced to the actual execution time.
Time spent in batcher stage is tracked in a separate histogram.
I expect to remove that histogram after batching rollout is complete,
but it will be helpful in the meantime to reason about the rollout.
## Problem
Protobuf doesn't support 128 bit integers, so we encode the keys as two
64 bit integers. Issue is that when we split the 128 bit compact key we
use signed 64 bit integers to represent the two halves. This may result
in a negative lower half when relnode is larger than `0x00800000`. When
we convert the lower half to an i128 we get a negative `CompactKey`.
## Summary of Changes
Use unsigned integers when encoding into Protobuf.
## Deployment
* Prod: We disabled the interpreted proto, so no compat concerns.
* Staging: Disable the interpreted proto, do one release, and then
release the fixed version.
We do this because a negative int32 will convert to a large uint32 value
and could give
a key in the actual pageserver space. In production we would around this
by adding new
fields to the proto and deprecating the old ones, but we can make our
lives easy here.
* Pre-prod: Same as staging
## Problem
When dev deployments are disabled (or fail), the tags for releases
aren't created. It makes more sense to have tag and release creation
before the deployment to prevent situations like
[this](https://github.com/neondatabase/neon/pull/9959).
It is not enough to move the tag creation before the deployment. If the
deployment fails, re-running the job isn't possible because the API call
to create the tag will fail.
## Summary of changes
- Tag/Release creation now happens before the deployment
- The two steps for tag and release have been merged into a bigger one
- There's new checks to ensure the that if the tags/releases already
exist as expected, things will continue just fine.
## Problem
In #9786 we stop storing SLRUs on non-zero shards.
However, there was one code path during ingest that still tries to
enumerate SLRU relations on all shards. This fails if it sees a tenant
who has never seen any write to an SLRU, or who has done such thorough
compaction+GC that it has dropped its SLRU directory key.
## Summary of changes
- Avoid trying to list SLRU relations on nonzero shards
Neon doesn't have seqscan detection of its own, so stop read_stream from
trying to utilize that readahead, and instead make it issue readahead of
its own.
## Problem
@knizhnik noticed that we didn't issue smgrprefetch[v] calls for
seqscans in PG17 due to the move to the read_stream API, which assumes
that the underlying IO facilities do seqscan detection for readahead.
That is a wrong assumption when Neon is involved, so let's remove the
code that applies that assumption.
## Summary of changes
Remove the cases where seqscans are detected and prefetch is disabled as
a consequence, and instead don't do that detection.
PG PR: https://github.com/neondatabase/postgres/pull/532
## Problem
resolve
https://github.com/neondatabase/neon/issues/9988#issuecomment-2528239437
## Summary of changes
* New verbose mode for storage scrubber scan metadata (pageserver) that
contains the error messages.
* Filter allowed_error list from the JSON output to determine the
healthy flag status.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
We have metrics for GetPage request latencies, but this is an extra
measure to capture requests that take way too long in the logs. The log
message is printed every 10 s, until the response is received:
```
PG:2024-12-09 16:02:07.715 GMT [1782845] LOG: [NEON_SMGR] [shard 0] no response received from pageserver for 10.000 s, still waiting (sent 10613 requests, received 10612 responses)
PG:2024-12-09 16:02:17.723 GMT [1782845] LOG: [NEON_SMGR] [shard 0] no response received from pageserver for 20.008 s, still waiting (sent 10613 requests, received 10612 responses)
PG:2024-12-09 16:02:19.719 GMT [1782845] LOG: [NEON_SMGR] [shard 0] received response from pageserver after 22.006 s
```
## Problem
close https://github.com/neondatabase/cloud/issues/19671
```
Timeline -----------------------------
^ last GC happened LSN
^ original retention period setting = 24hr
> refresh-gc-info updates the gc_info
^ planned cutoff (gc_info)
^ customer set retention to 48hr, and it's still within the last GC LSN
^1 ^2 we have two choices: (1) update the planned cutoff to
move backwards, or (2) keep the current one
```
In this patch, we decided to keep the current cutoff instead of moving
back the gc_info to avoid races. In the future, we could allow the
planned gc cutoff to go back once cplane sends a retention_history
tenant config update, but this requires a careful revisit of the code.
## Summary of changes
Ensure that GC cutoffs never go back if retention settings get changed.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
See https://github.com/neondatabase/neon/issues/9961
Current implementation of prefetch buffer resize doesn't correctly
handle in-flight requests
## Summary of changes
1. Fix index of entry we should wait for if new prefetch buffer size is
smaller than number of in-flight requests.
2. Correctly set flush position
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Azure has a different per-request limit of 256 items for bulk deletion
compared to the number of 1000 on AWS. Therefore, we need to support
multiple values. Due to `GenericRemoteStorage`, we can't add an
associated constant, but it has to be a function.
The PR replaces the `MAX_KEYS_PER_DELETE` constant with a function of
the same name, implemented on both the `RemoteStorage` trait as well as
on `GenericRemoteStorage`.
The value serves as hint of how many objects to pass to the
`delete_objects` function.
Reading:
* https://learn.microsoft.com/en-us/rest/api/storageservices/blob-batch
* https://docs.aws.amazon.com/AmazonS3/latest/API/API_DeleteObjects.html
Part of #7931
Hello! I was interested in potentially making some contributions to Neon
and looking through the issue backlog I found
[8200](https://github.com/neondatabase/neon/issues/8200) which seemed
like a good first issue to attempt to tackle. I see it was assigned a
while ago so apologies if I'm stepping on any toes with this PR. I also
apologize for the size of this PR. I'm not sure if there is a simple way
to reduce it given the footprint of the components being changed.
## Problem
This PR is attempting to address part of the problem outlined in issue
[8200](https://github.com/neondatabase/neon/issues/8200). Namely to
remove global static usage of timeline state in favour of
`Arc<GlobalTimelines>` and to replace wasteful clones of
`SafeKeeperConf` with `Arc<SafeKeeperConf>`. I did not opt to tackle
`RemoteStorage` in this PR to minimize the amount of changes as this PR
is already quite large. I also did not opt to introduce an
`SafekeeperApp` wrapper struct to similarly minimize changes but I can
tackle either or both of these omissions in this PR if folks would like.
## Summary of changes
- Remove static usage of `GlobalTimelines` in favour of
`Arc<GlobalTimelines>`
- Wrap `SafeKeeperConf` in `Arc` to avoid wasteful clones of the
underlying struct
## Some additional thoughts
- We seem to currently store `SafeKeeperConf` in `GlobalTimelines` and
then expose it through a public`get_global_config` function which
requires locking. This seems needlessly wasteful and based on observed
usage we could remove this public accessor and force consumers to
acquire `SafeKeeperConf` through the new Arc reference.
## Problem
close https://github.com/neondatabase/neon/issues/10049, close
https://github.com/neondatabase/neon/issues/10030, close
https://github.com/neondatabase/neon/issues/8861
part of https://github.com/neondatabase/neon/issues/9114
The legacy gc process calls `get_latest_gc_cutoff`, which uses a Rcu
different than the gc_info struct. In the gc_compaction_smoke test case,
the "latest" cutoff could be lower than the gc_info struct, causing
gc-compaction to collect data that could be accessed by
`latest_gc_cutoff`. Technically speaking, there's nothing wrong with
gc-compaction using gc_info without considering latest_gc_cutoff,
because gc_info is the source of truth. But anyways, let's fix it.
## Summary of changes
* gc-compaction uses `latest_gc_cutoff` instead of gc_info to determine
the gc horizon.
* if a gc-compaction is scheduled via tenant compaction iteration, it
will take the gc_block lock to avoid racing with functionalities like
detach ancestor (if it's triggered via manual compaction API without
scheduling, then it won't take the lock)
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Currently, we run the `pg_regress` tests only for PG16
However, PG17 is a part of Neon and should be tested as well
## Summary of changes
Modified the workflow and added a patch for PG17 enabling the
`pg_regress` tests.
The problem with leftovers was solved by using branches.
For a while already, we've been unable to update the Azure SDK crates
due to Azure adopting use of a non-tokio async runtime, see #7545.
The effort to upstream the fix got stalled, and I think it's better to
switch to a patched version of the SDK that is up to date.
Now we have a fork of the SDK under the neondatabase github org, to
which I have applied Conrad's rebased patches to:
https://github.com/neondatabase/azure-sdk-for-rust/tree/neon .
The existence of a fork will also help with shipping bulk delete support
before it's upstreamed (#7931).
Also, in related news, the Azure SDK has gotten a rift in development,
where the main branch pertains to a future, to-be-officially-blessed
release of the SDK, and the older versions, which we are currently
using, are on the `legacy` branch. Upstream doesn't really want patches
for the `legacy` branch any more, they want to focus on the `main`
efforts. However, even then, the `legacy` branch is still newer than
what we are having right now, so let's switch to `legacy` for now.
Depending on how long it takes, we can switch to the official version of
the SDK once it's released or switch to the upstream `main` branch if
there is changes we want before that.
As a nice side effect of this PR, we now use reqwest 0.12 everywhere,
dropping the dependency on version 0.11.
Fixes#7545
Result of running:
cargo update -p aws-types -p aws-sigv4 -p aws-credential-types -p
aws-smithy-types -p aws-smithy-async -p aws-sdk-kms -p aws-sdk-iam -p
aws-sdk-s3 -p aws-config
We want to keep the AWS SDK up to date as that way we benefit from new
developments and improvements.
## Problem
We saw a tenant get stuck when it had been put into Pause scheduling
mode to pin it to a pageserver, then it was left idle for a while and
the control plane tried to detach it.
Close: https://github.com/neondatabase/neon/issues/9957
## Summary of changes
- When changing policy to Detached or Secondary, set the scheduling
policy to Active.
- Add a test that exercises this
- When persisting tenant shards, set their `generation_pageserver` to
null if the placement policy is not Attached (this enables consistency
checks to work, and avoids leaving state in the DB that could be
confusing/misleading in future)
## Problem
In #9962 I changed the smgr metrics to include time spent on flush.
It isn't under our (=storage team's) control how long that flush takes
because the client can stop reading requests.
## Summary of changes
Stop the timer as soon as we've buffered up the response in the
`pgb_writer`.
Track flush time in a separate metric.
---------
Co-authored-by: Yuchen Liang <70461588+yliang412@users.noreply.github.com>
If the pageserver connection is lost while receiving the prefetch
request, the prefetch queue is cleared. The error message prints the
values from the prefetch slot, but because the slot was already cleared,
they're all zeros:
LOG: [NEON_SMGR] [shard 0] No response from reading prefetch entry 0:
0/0/0.0 block 0. This can be caused by a concurrent disconnect
To fix, make local copies of the values.
In the passing, also add a sanity check that if the receive() call
succeeds, the prefetch slot is still intact.
## Problem
part of https://github.com/neondatabase/neon/issues/9114, stacked PR
over #9809
The compaction scheduler now schedules partial compaction jobs.
## Summary of changes
* Add the compaction job splitter based on size.
* Schedule subcompactions using the compaction scheduler.
* Test subcompaction scheduler in the smoke regress test.
* Temporarily disable layer map checks
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
With the current metrics we can't identify which shards are ingesting
data at any given time.
## Summary of changes
Add a metric for the number of wal records received for processing by
each shard. This is per (tenant, timeline, shard).
## Problem
We didn't have a codeowner for `/compute`, so nobody was auto-assigned
for PRs like #9973
## Summary of changes
While on it:
1. Group codeowners into sections.
2. Remove control plane from the `/compute_tools` because it's primarily
the internal `compute_ctl` code.
3. Add control plane (and compute) to `/libs/compute_api` because that's
the shared public interface of the compute.
Like #9931 but without rebasing upstream just yet, to try and minimise
the differences.
Removes all proxy-specific commits from the rust-postgres fork, now that
proxy no longer depends on them. Merging upstream changes to come later.
Closes#9387.
## Problem
`BufferedWriter` cannot proceed while the owned buffer is flushing to
disk. We want to implement double buffering so that the flush can happen
in the background. See #9387.
## Summary of changes
- Maintain two owned buffers in `BufferedWriter`.
- The writer is in charge of copying the data into owned, aligned
buffer, once full, submit it to the flush task.
- The flush background task is in charge of flushing the owned buffer to
disk, and returned the buffer to the writer for reuse.
- The writer and the flush background task communicate through a
bi-directional channel.
For in-memory layer, we also need to be able to read from the buffered
writer in `get_values_reconstruct_data`. To handle this case, we did the
following
- Use replace `VirtualFile::write_all` with `VirtualFile::write_all_at`,
and use `Arc` to share it between writer and background task.
- leverage `IoBufferMut::freeze` to get a cheaply clonable `IoBuffer`,
one clone will be submitted to the channel, the other clone will be
saved within the writer to serve reads. When we want to reuse the
buffer, we can invoke `IoBuffer::into_mut`, which gives us back the
mutable aligned buffer.
- InMemoryLayer reads is now aware of the maybe_flushed part of the
buffer.
**Caveat**
- We removed the owned version of write, because this interface does not
work well with buffer alignment. The result is that without direct IO
enabled,
[`download_object`](a439d57050/pageserver/src/tenant/remote_timeline_client/download.rs (L243))
does one more memcpy than before this PR due to the switch to use
`_borrowed` version of the write.
- "Bypass aligned part of write" could be implemented later to avoid
large amount of memcpy.
**Testing**
- use an oneshot channel based control mechanism to make flush behavior
deterministic in test.
- test reading from `EphemeralFile` when the last submitted buffer is
not flushed, in-progress, and done flushing to disk.
## Performance
We see performance improvement for small values, and regression on big
values, likely due to being CPU bound + disk write latency.
[Results](https://www.notion.so/neondatabase/Benchmarking-New-BufferedWriter-11-20-2024-143f189e0047805ba99acda89f984d51?pvs=4)
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We have a scale test for the storage controller which also acts as a
good stress test for scheduling stability. However, it created nodes
with no AZs set.
## Summary of changes
- Bump node count to 6 and set AZs on them.
This is a precursor to other AZ-related PRs, to make sure any new code
that's landed is getting scale tested in an AZ-aware environment.
## Problem
We practice a manual release flow for the compute module. This will
allow automation of the compute release process.
## Summary of changes
The workflow was modified to make a compute release automatically on the
branch release-compute.
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
Reqwest errors don't include details about the inner source error. This
means that we get opaque errors like:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config)
```
Instead of the more helpful:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config): operation timed out
```
Touches #9801.
## Summary of changes
Include the source error for `reqwest::Error` wherever it's displayed.
## Problem
When client specifies `application_name`, pgbouncer propagates it to the
Postgres. Yet, if client doesn't do it, we have hard time figuring out
who opens a lot of Postgres connections (including the `cloud_admin`
ones).
See this investigation as an example:
https://neondb.slack.com/archives/C0836R0RZ0D
## Summary of changes
I haven't found this documented, but it looks like pgbouncer accepts
standard Postgres connstring parameters in the connstring in the
`[databases]` section, so put the default `application_name=pgbouncer`
there. That way, we will always see who opens Postgres connections. I
did tests, and if client specifies a `application_name`, pgbouncer
overrides this default, so it only works if it's not specified or set to
blank `&application_name=` in the connection string.
This is the last place we could potentially open some Postgres
connections without `application_name`. Everything else should be either
of two:
1. Direct client connections without `application_name`, but these
should be strictly non-`cloud_admin` ones
2. Some ad-hoc internal connections, so if we see spikes of unidentified
`cloud_admin` connections, we will need to investigate it again.
Fixesneondatabase/cloud#20948
(stacked on #9990 and #9995)
Partially fixes#1287 with a custom option field to enable the fixed
behaviour. This allows us to gradually roll out the fix without silently
changing the observed behaviour for our customers.
related to https://github.com/neondatabase/cloud/issues/15284
## Problem
During deploys, we see a lot of 500 errors due to heapmap uploads for
inactive tenants. These should be 503s instead.
Resolves#9574.
## Summary of changes
Make the secondary tenant scheduler use `ApiError` rather than
`anyhow::Error`, to propagate the tenant error and convert it to an
appropriate status code.
## Problem
we tried different parallelism settings for ingest bench
## Summary of changes
the following settings seem optimal after merging
- SK side Wal filtering
- batched getpages
Settings:
- effective_io_concurrency 100
- concurrency limit 200 (different from Prod!)
- jobs 4, maintenance workers 7
- 10 GB chunk size
## Problem
```
2024-12-03T15:42:46.5978335Z + poetry run python /__w/neon/neon/scripts/ingest_perf_test_result.py --ingest /__w/neon/neon/test_runner/perf-report-local
2024-12-03T15:42:49.5325077Z Traceback (most recent call last):
2024-12-03T15:42:49.5325603Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 165, in <module>
2024-12-03T15:42:49.5326029Z main()
2024-12-03T15:42:49.5326316Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 155, in main
2024-12-03T15:42:49.5326739Z ingested = ingest_perf_test_result(cur, item, recorded_at_timestamp)
2024-12-03T15:42:49.5327488Z ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2024-12-03T15:42:49.5327914Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 99, in ingest_perf_test_result
2024-12-03T15:42:49.5328321Z psycopg2.extras.execute_values(
2024-12-03T15:42:49.5328940Z File "/github/home/.cache/pypoetry/virtualenvs/non-package-mode-_pxWMzVK-py3.11/lib/python3.11/site-packages/psycopg2/extras.py", line 1299, in execute_values
2024-12-03T15:42:49.5335618Z cur.execute(b''.join(parts))
2024-12-03T15:42:49.5335967Z psycopg2.errors.InvalidTextRepresentation: invalid input syntax for type numeric: "concurrent-futures"
2024-12-03T15:42:49.5336287Z LINE 57: 'concurrent-futures',
2024-12-03T15:42:49.5336462Z ^
```
## Summary of changes
- `test_page_service_batching`: save non-numeric params as `labels`
- Add a runtime check that `metric_value` is NUMERIC
Before this PR, some override callbacks used `.default()`, others
used `.setdefault()`.
As of this PR, all callbacks use `.setdefault()` which I think is least
prone to failure.
Aligning on a single way will set the right example for future tests
that need such customization.
The `test_pageserver_getpage_throttle.py` technically is a change in
behavior: before, it replaced the `tenant_config` field, now it just
configures the throttle. This is what I believe is intended anyway.
Support tenant manifests in the storage scrubber:
* list the manifests, order them by generation
* delete all manifests except for the two most recent generations
* for the latest manifest: try parsing it.
I've tested this patch by running the against a staging bucket and it
successfully deleted stuff (and avoided deleting the latest two
generations).
In follow-up work, we might want to also check some invariants of the
manifest, as mentioned in #8088.
Part of #9386
Part of #8088
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The Pageserver signal handler would only respond to a single signal and
initiate shutdown. Subsequent signals were ignored. This meant that a
`SIGQUIT` sent after a `SIGTERM` had no effect (e.g. in the case of a
slow or stalled shutdown). The `test_runner` uses this to force shutdown
if graceful shutdown is slow.
Touches #9740.
## Summary of changes
Keep responding to signals after the initial shutdown signal has been
received.
Arguably, the `test_runner` should also use `SIGKILL` rather than
`SIGQUIT` in this case, but it seems reasonable to respond to `SIGQUIT`
regardless.
Keeping the `mock` postgres cplane adaptor using "stock" tokio-postgres
allows us to remove a lot of dead weight from our actual postgres
connection logic.
## Problem
We saw a peculiar case where a pageserver apparently got a 0-tenant
response to `/re-attach` but we couldn't see the request landing on a
storage controller. It was hard to confirm retrospectively that the
pageserver was configured properly at the moment it sent the request.
## Summary of changes
- Log the URL to which we are sending the request
- Log the NodeId and metadata that we sent
## Problem
Sharded tenants should be run in a single AZ for best performance, so
that computes have AZ-local latency to all the shards.
Part of https://github.com/neondatabase/neon/issues/8264
## Summary of changes
- When we split a tenant, instead of updating each shard's preferred AZ
to wherever it is scheduled, propagate the preferred AZ from the parent.
- Drop the check in `test_shard_preferred_azs` that asserts shards end
up in their preferred AZ: this will not be true again until the
optimize_attachment logic is updated to make this so. The existing check
wasn't testing anything about scheduling, it was just asserting that we
set preferred AZ in a way that matches the way things happen to be
scheduled at time of split.
## Problem
In the batching PR
- https://github.com/neondatabase/neon/pull/9870
I stopped deducting the time-spent-in-throttle fro latency metrics,
i.e.,
- smgr latency metrics (`SmgrOpTimer`)
- basebackup latency (+scan latency, which I think is part of
basebackup).
The reason for stopping the deduction was that with the introduction of
batching, the trick with tracking time-spent-in-throttle inside
RequestContext and swap-replacing it from the `impl Drop for
SmgrOpTimer` no longer worked with >1 requests in a batch.
However, deducting time-spent-in-throttle is desirable because our
internal latency SLO definition does not account for throttling.
## Summary of changes
- Redefine throttling to be a page_service pagestream request throttle
instead of a throttle for repository `Key` reads through `Timeline::get`
/ `Timeline::get_vectored`.
- This means reads done by `basebackup` are no longer subject to any
throttle.
- The throttle applies after batching, before handling of the request.
- Drive-by fix: make throttle sensitive to cancellation.
- Rename metric label `kind` from `timeline_get` to `pagestream` to
reflect the new scope of throttling.
To avoid config format breakage, we leave the config field named
`timeline_get_throttle` and ignore the `task_kinds` field.
This will be cleaned up in a future PR.
## Trade-Offs
Ideally, we would apply the throttle before reading a request off the
connection, so that we queue the minimal amount of work inside the
process.
However, that's not possible because we need to do shard routing.
The redefinition of the throttle to limit pagestream request rate
instead of repository `Key` rate comes with several downsides:
- We're no longer able to use the throttle mechanism for other other
tasks, e.g. image layer creation.
However, in practice, we never used that capability anyways.
- We no longer throttle basebackup.
## Problem
`test_sharded_ingest` ingests a lot of data, which can cause shutdown to
be slow e.g. due to local "S3 uploads" or compactions. This can cause
test flakes during teardown.
Resolves#9740.
## Summary of changes
Perform an immediate shutdown of the cluster.
## Problem
We don't have good observability for memory usage. This would be useful
e.g. to debug OOM incidents or optimize performance or resource usage.
We would also like to use continuous profiling with e.g. [Grafana Cloud
Profiles](https://grafana.com/products/cloud/profiles-for-continuous-profiling/)
(see https://github.com/neondatabase/cloud/issues/14888).
This PR is intended as a proof of concept, to try it out in staging and
drive further discussions about profiling more broadly.
Touches https://github.com/neondatabase/neon/issues/9534.
Touches https://github.com/neondatabase/cloud/issues/14888.
Depends on #9779.
Depends on #9780.
## Summary of changes
Adds a HTTP route `/profile/heap` that takes a heap profile and returns
it. Query parameters:
* `format`: output format (`jemalloc` or `pprof`; default `pprof`).
Unlike CPU profiles (see #9764), heap profiles are not symbolized and
require the original binary to translate addresses to function names. To
make this work with Grafana, we'll probably have to symbolize the
process server-side -- this is left as future work, as is other output
formats like SVG.
Heap profiles don't work on macOS due to limitations in jemalloc.
## Problem
The extensions for Postgres v17 are ready but we do not test the
extensions shipped with v17
## Summary of changes
Build the test image based on Postgres v17. Run the tests for v17.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
This PR
- fixes smgr metrics https://github.com/neondatabase/neon/issues/9925
- adds an additional startup log line logging the current batching
config
- adds a histogram of batch sizes global and per-tenant
- adds a metric exposing the current batching config
The issue described #9925 is that before this PR, request latency was
only observed *after* batching.
This means that smgr latency metrics (most importantly getpage latency)
don't account for
- `wait_lsn` time
- time spent waiting for batch to fill up / the executor stage to pick
up the batch.
The fix is to use a per-request batching timer, like we did before the
initial batching PR.
We funnel those timers through the entire request lifecycle.
I noticed that even before the initial batching changes, we weren't
accounting for the time spent writing & flushing the response to the
wire.
This PR drive-by fixes that deficiency by dropping the timers at the
very end of processing the batch, i.e., after the `pgb.flush()` call.
I was **unable to maintain the behavior that we deduct
time-spent-in-throttle from various latency metrics.
The reason is that we're using a *single* counter in `RequestContext` to
track micros spent in throttle.
But there are *N* metrics timers in the batch, one per request.
As a consequence, the practice of consuming the counter in the drop
handler of each timer no longer works because all but the first timer
will encounter error `close() called on closed state`.
A failed attempt to maintain the current behavior can be found in
https://github.com/neondatabase/neon/pull/9951.
So, this PR remvoes the deduction behavior from all metrics.
I started a discussion on Slack about it the implications this has for
our internal SLO calculation:
https://neondb.slack.com/archives/C033RQ5SPDH/p1732910861704029
# Refs
- fixes https://github.com/neondatabase/neon/issues/9925
- sub-issue https://github.com/neondatabase/neon/issues/9377
- epic: https://github.com/neondatabase/neon/issues/9376
Before this PR, the storcon_cli didn't have a way to show the
tenant-wide information of the TenantDescribeResponse.
Sadly, the `Serialize` impl for the tenant config doesn't skip on
`None`, so, the output becomes a bit bloated.
Maybe we can use `skip_serializing_if(Option::is_none)` in the future.
=> https://github.com/neondatabase/neon/issues/9983
## Problem
I was touching `test_storage_controller_node_deletion` because for AZ
scheduling work I was adding a change to the storage controller (kick
secondaries during optimisation) that made a FIXME in this test defunct.
While looking at it I also realized that we can easily fix the way node
deletion currently doesn't use a proper ScheduleContext, using the
iterator type recently added for that purpose.
## Summary of changes
- A testing-only behavior in storage controller where if a secondary
location isn't yet ready during optimisation, it will be actively
polled.
- Remove workaround in `test_storage_controller_node_deletion` that
previously was needed because optimisation would get stuck on cold
secondaries.
- Update node deletion code to use a `TenantShardContextIterator` and
thereby a proper ScheduleContext
## Problem
After enabling LFC in tests and lowering `shared_buffers` we started
having more problems with `test_pg_regress`.
## Summary of changes
Set `shared_buffers` to 1MB to both exercise getPage requests/LFC, and
still have enough room for Postgres to operate. Everything smaller might
be not enough for Postgres under load, and can cause errors like 'no
unpinned buffers available'.
See Konstantin's comment [1] as well.
Fixes#9956
[1]:
https://github.com/neondatabase/neon/issues/9956#issuecomment-2511608097
On reconfigure, we no longer passed a port for the extension server
which caused us to not write out the neon.extension_server_port line.
Thus, Postgres thought we were setting the port to the default value of
0. PGC_POSTMASTER GUCs cannot be set at runtime, which causes the
following log messages:
> LOG: parameter "neon.extension_server_port" cannot be changed without
restarting the server
> LOG: configuration file
"/var/db/postgres/compute/pgdata/postgresql.conf" contains errors;
unaffected changes were applied
Fixes: https://github.com/neondatabase/neon/issues/9945
Signed-off-by: Tristan Partin <tristan@neon.tech>
The spec was written for the buggy protocol which we had before the one
more similar to Raft was implemented. Update the spec with what we
currently have.
ref https://github.com/neondatabase/neon/issues/8699
## Problem
The credentials providers tries to connect to AWS STS even when we use
plain Redis connections.
## Summary of changes
* Construct the CredentialsProvider only when needed ("irsa").
## Problem
`if: ${{ github.event.schedule }}` gets skipped if a previous step has
failed, but we want to run the step for both `success` and `failure`
## Summary of changes
- Add `!cancelled()` to notification step if-condition, to skip only
cancelled jobs
Fixes https://github.com/neondatabase/cloud/issues/20973.
This refactors `connect_raw` in order to return direct access to the
delayed notices.
I cannot find a way to test this with psycopg2 unfortunately, although
testing it with psql does return the expected results.
## Problem
We can't easily tell how far the state of shards is from their AZ
preferences. This can be a cause of performance issues, so it's
important for diagnosability that we can tell easily if there are
significant numbers of shards that aren't running in their preferred AZ.
Related: https://github.com/neondatabase/cloud/issues/15413
## Summary of changes
- In reconcile_all, count shards that are scheduled into the wrong AZ
(if they have a preference), and publish it as a prometheus gauge.
- Also calculate a statistic for how many shards wanted to reconcile but
couldn't.
This is clearly a lazy calculation: reconcile all only runs
periodically. But that's okay: shards in the wrong AZ is something that
only matters if it stays that way for some period of time.
Improves `wait_until` by:
* Use `timeout` instead of `iterations`. This allows changing the
timeout/interval parameters independently.
* Make `timeout` and `interval` optional (default 20s and 0.5s). Most
callers don't care.
* Only output status every 1s by default, and add optional
`status_interval` parameter.
* Remove `show_intermediate_error`, this was always emitted anyway.
Most callers have been updated to use the defaults, except where they
had good reason otherwise.
## Problem
We saw unexpected container terminations when running in k8s with with
small CPU resource requests.
The /status and /ready handlers called `maybe_forward`, which always
takes the lock on Service::inner.
If there is a lot of writer lock contention, and the container is
starved of CPU, this increases the likelihood that we will get killed by
the kubelet.
It isn't certain that this was a cause of issues, but it is a potential
source that we can eliminate.
## Summary of changes
- Revise logic to return immediately if the URL is in the non-forwarded
list, rather than calling maybe_forward
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1732110190129479
We observe the following error in the logs
```
[XX000] ERROR: [NEON_SMGR] [shard 3] Incorrect prefetch read: status=1 response=0x7fafef335138 my=128 receive=128
```
most likely caused by changing `neon.readahead_buffer_size`
## Summary of changes
1. Copy shard state
2. Do not use prefetch_set_unused in readahead_buffer_resize
3. Change prefetch buffer overflow criteria
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Current compute images for Postgres 14-16 don't build on Debian 12
because of issues with extensions.
This PR fixes that, but for the current setup, it is mostly a no-op
change.
## Summary of changes
- Use `/bin/bash -euo pipefail` as SHELL to fail earlier
- Fix `plv8` build: backport a trivial patch for v8
- Fix `postgis` build: depend `sfgal` version on Debian version instead
of Postgres version
Tested in: https://github.com/neondatabase/neon/pull/9849
#8564
## Problem
The main and backup consumption metric pushes are completely
independent,
resulting in different event time windows and different idempotency
keys.
## Summary of changes
* Merge the push tasks, but keep chunks the same size.
# Problem
The timeout-based batching adds latency to unbatchable workloads.
We can choose a short batching timeout (e.g. 10us) but that requires
high-resolution timers, which tokio doesn't have.
I thoroughly explored options to use OS timers (see
[this](https://github.com/neondatabase/neon/pull/9822) abandoned PR).
In short, it's not an attractive option because any timer implementation
adds non-trivial overheads.
# Solution
The insight is that, in the steady state of a batchable workload, the
time we spend in `get_vectored` will be hundreds of microseconds anyway.
If we prepare the next batch concurrently to `get_vectored`, we will
have a sizeable batch ready once `get_vectored` of the current batch is
done and do not need an explicit timeout.
This can be reasonably described as **pipelining of the protocol
handler**.
# Implementation
We model the sub-protocol handler for pagestream requests
(`handle_pagrequests`) as two futures that form a pipeline:
2. Batching: read requests from the connection and fill the current
batch
3. Execution: `take` the current batch, execute it using `get_vectored`,
and send the response.
The Reading and Batching stage are connected through a new type of
channel called `spsc_fold`.
See the long comment in the `handle_pagerequests_pipelined` for details.
# Changes
- Refactor `handle_pagerequests`
- separate functions for
- reading one protocol message; produces a `BatchedFeMessage` with just
one page request in it
- batching; tried to merge an incoming `BatchedFeMessage` into an
existing `BatchedFeMessage`; returns `None` on success and returns back
the incoming message in case merging isn't possible
- execution of a batched message
- unify the timeline handle acquisition & request span construction; it
now happen in the function that reads the protocol message
- Implement serial and pipelined model
- serial: what we had before any of the batching changes
- read one protocol message
- execute protocol messages
- pipelined: the design described above
- optionality for execution of the pipeline: either via concurrent
futures vs tokio tasks
- Pageserver config
- remove batching timeout field
- add ability to configure pipelining mode
- add ability to limit max batch size for pipelined configurations
(required for the rollout, cf
https://github.com/neondatabase/cloud/issues/20620 )
- ability to configure execution mode
- Tests
- remove `batch_timeout` parametrization
- rename `test_getpage_merge_smoke` to `test_throughput`
- add parametrization to test different max batch sizes and execution
moes
- rename `test_timer_precision` to `test_latency`
- rename the test case file to `test_page_service_batching.py`
- better descriptions of what the tests actually do
## On the holding The `TimelineHandle` in the pending batch
While batching, we hold the `TimelineHandle` in the pending batch.
Therefore, the timeline will not finish shutting down while we're
batching.
This is not a problem in practice because the concurrently ongoing
`get_vectored` call will fail quickly with an error indicating that the
timeline is shutting down.
This results in the Execution stage returning a `QueryError::Shutdown`,
which causes the pipeline / entire page service connection to shut down.
This drops all references to the
`Arc<Mutex<Option<Box<BatchedFeMessage>>>>` object, thereby dropping the
contained `TimelineHandle`s.
- => fixes https://github.com/neondatabase/neon/issues/9850
# Performance
Local run of the benchmarks, results in [this empty
commit](1cf5b1463f)
in the PR branch.
Key take-aways:
* `concurrent-futures` and `tasks` deliver identical `batching_factor`
* tail latency impact unknown, cf
https://github.com/neondatabase/neon/issues/9837
* `concurrent-futures` has higher throughput than `tasks` in all
workloads (=lower `time` metric)
* In unbatchable workloads, `concurrent-futures` has 5% higher
`CPU-per-throughput` than that of `tasks`, and 15% higher than that of
`serial`.
* In batchable-32 workload, `concurrent-futures` has 8% lower
`CPU-per-throughput` than that of `tasks` (comparison to tput of
`serial` is irrelevant)
* in unbatchable workloads, mean and tail latencies of
`concurrent-futures` is practically identical to `serial`, whereas
`tasks` adds 20-30us of overhead
Overall, `concurrent-futures` seems like a slightly more attractive
choice.
# Rollout
This change is disabled-by-default.
Rollout plan:
- https://github.com/neondatabase/cloud/issues/20620
# Refs
- epic: https://github.com/neondatabase/neon/issues/9376
- this sub-task: https://github.com/neondatabase/neon/issues/9377
- the abandoned attempt to improve batching timeout resolution:
https://github.com/neondatabase/neon/pull/9820
- closes https://github.com/neondatabase/neon/issues/9850
- fixes https://github.com/neondatabase/neon/issues/9835
## Problem
It appears that the Azure storage API tends to hang TCP connections more
than S3 does.
Currently we use a 2 minute timeout for all downloads. This is large
because sometimes the objects we download are large. However, waiting 2
minutes when doing something like downloading a manifest on tenant
attach is problematic, because when someone is doing a "create tenant,
create timeline" workflow, that 2 minutes is long enough for them
reasonably to give up creating that timeline.
Rather than propagate oversized timeouts further up the stack, we should
use a different timeout for objects that we expect to be small.
Closes: https://github.com/neondatabase/neon/issues/9836
## Summary of changes
- Add a `small_timeout` configuration attribute to remote storage,
defaulting to 30 seconds (still a very generous period to do something
like download an index)
- Add a DownloadKind parameter to DownloadOpts, so that callers can
indicate whether they expect the object to be small or large.
- In the azure client, use small timeout for HEAD requests, and for GET
requests if DownloadKind::Small is used.
- Use DownloadKind::Small for manifests, indices, and heatmap downloads.
This PR intentionally does not make the equivalent change to the S3
client, to reduce blast radius in case this has unexpected consequences
(we could accomplish the same thing by editing lots of configs, but just
skipping the code is simpler for right now)
## Problem
It was not always possible to judge what exactly some `cloud_admin`
connections were doing because we didn't consistently set
`application_name` everywhere.
## Summary of changes
Unify the way we connect to Postgres:
1. Switch to building configs everywhere
2. Always set `application_name` and make naming consistent
Follow-up for #9919
Part of neondatabase/cloud#20948
## Problem
To add Safekeeper heap profiling in #9778, we need to switch to an
allocator that supports it. Pageserver and proxy already use jemalloc.
Touches #9534.
## Summary of changes
Use jemalloc in Safekeeper.
## Problem
When picking locations for a shard, we should use a ScheduleContext that
includes all the other shards in the tenant, so that we apply proper
anti-affinity between shards. If we don't do this, then it can lead to
unstable scheduling, where we place a shard somewhere that the optimizer
will then immediately move it away from.
We didn't always do this, because it was a bit awkward to accumulate the
context for a tenant rather than just walking tenants.
This was a TODO in `handle_node_availability_transition`:
```
// TODO: populate a ScheduleContext including all shards in the same tenant_id (only matters
// for tenants without secondary locations: if they have a secondary location, then this
// schedule() call is just promoting an existing secondary)
```
This is a precursor to https://github.com/neondatabase/neon/issues/8264,
where the current imperfect scheduling during node evacuation hampers
testing.
## Summary of changes
- Add an iterator type that yields each shard along with a
schedulecontext that includes all the other shards from the same tenant
- Use the iterator to replace hand-crafted logic in optimize_all_plan
(functionally identical)
- Use the iterator in `handle_node_availability_transition` to apply
proper anti-affinity during node evacuation.
Our rust-postgres fork is getting messy. Mostly because proxy wants more
control over the raw protocol than tokio-postgres provides. As such,
it's diverging more and more. Storage and compute also make use of
rust-postgres, but in more normal usage, thus they don't need our crazy
changes.
Idea:
* proxy maintains their subset
* other teams use a minimal patch set against upstream rust-postgres
Reviewing this code will be difficult. To implement it, I
1. Copied tokio-postgres, postgres-protocol and postgres-types from
00940fcdb5
2. Updated their package names with the `2` suffix to make them compile
in the workspace.
3. Updated proxy to use those packages
4. Copied in the code from tokio-postgres-rustls 0.13 (with some patches
applied https://github.com/jbg/tokio-postgres-rustls/pull/32https://github.com/jbg/tokio-postgres-rustls/pull/33)
5. Removed as much dead code as I could find in the vendored libraries
6. Updated the tokio-postgres-rustls code to use our existing channel
binding implementation
Adds a benchmark for logical message WAL ingestion throughput
end-to-end. Logical messages are essentially noops, and thus ignored by
the Pageserver.
Example results from my MacBook, with fsync enabled:
```
postgres_ingest: 14.445 s
safekeeper_ingest: 29.948 s
pageserver_ingest: 30.013 s
pageserver_recover_ingest: 8.633 s
wal_written: 10,340 MB
message_count: 1310720 messages
postgres_throughput: 715 MB/s
safekeeper_throughput: 345 MB/s
pageserver_throughput: 344 MB/s
pageserver_recover_throughput: 1197 MB/s
```
See
https://github.com/neondatabase/neon/issues/9642#issuecomment-2475995205
for running analysis.
Touches #9642.
## Problem
We used `set_path()` to replace the database name in the connection
string. It automatically does url-safe encoding if the path is not
already encoded, but it does it as per the URL standard, which assumes
that tabs can be safely removed from the path without changing the
meaning of the URL. See, e.g.,
https://url.spec.whatwg.org/#concept-basic-url-parser. It also breaks
for DBs with properly %-encoded names, like with `%20`, as they are kept
intact, but actually should be escaped.
Yet, this is not true for Postgres, where it's completely valid to have
trailing tabs in the database name.
I think this is the PR that caused this regression
https://github.com/neondatabase/neon/pull/9717, as it switched from
`postgres::config::Config` back to `set_path()`.
This was fixed a while ago already [1], btw, I just haven't added a test
to catch this regression back then :(
## Summary of changes
This commit changes the code back to use
`postgres/tokio_postgres::Config` everywhere.
While on it, also do some changes around, as I had to touch this code:
1. Bump some logging from `debug` to `info` in the spec apply path. We
do not use `debug` in prod, and it was tricky to understand what was
going on with this bug in prod.
2. Refactor configuration concurrency calculation code so it was
reusable. Yet, still keep `1` in the case of reconfiguration. The
database can be actively used at this moment, so we cannot guarantee
that there will be enough spare connection slots, and the underlying
code won't handle connection errors properly.
3. Simplify the installed extensions code. It was spawning a blocking
task inside async function, which doesn't make much sense. Instead, just
have a main sync function and call it with `spawn_blocking` in the API
code -- the only place we need it to be async.
4. Add regression python test to cover this and related problems in the
future. Also, add more extensive testing of schema dump and DBs and
roles listing API.
[1]:
4d1e48f3b9
[2]:
https://www.postgresql.org/message-id/flat/20151023003445.931.91267%40wrigleys.postgresql.orgResolvesneondatabase/cloud#20869
## Problem
Currently, we rerun only known flaky tests. This approach was chosen to
reduce the number of tests that go unnoticed (by forcing people to take
a look at failed tests and rerun the job manually), but it has some
drawbacks:
- In PRs, people tend to push new changes without checking failed tests
(that's ok)
- In the main, tests are just restarted without checking
(understandable)
- Parametrised tests become flaky one by one, i.e. if `test[1]` is flaky
`, test[2]` is not marked as flaky automatically (which may or may not
be the case).
I suggest rerunning all failed tests to increase the stability of GitHub
jobs and using the Grafana Dashboard with flaky tests for deeper
analysis.
## Summary of changes
- Rerun all failed tests twice at max
## Problem
For the interpreted proto the pageserver is not returning the correct
LSN
in replies to keep alive requests. This is because the interpreted
protocol arm
was not updating `last_rec_lsn`.
## Summary of changes
* Return correct LSN in keep-alive responses
* Fix shard field in wal sender traces
We keep the practice of keeping the compiler up to date, pointing to the
latest release. This is done by many other projects in the Rust
ecosystem as well.
[Release notes](https://releases.rs/docs/1.83.0/).
Also update `cargo-hakari`, `cargo-deny`, `cargo-hack` and
`cargo-nextest` to their latest versions.
Prior update was in #9445.
## Problem
We currently see elevated levels of errors for GetBlob requests. This is
because 404 and 304 are counted as errors for metric reporting.
## Summary of Changes
Bring the implementation in line with the S3 client and treat 404 and
304 responses as ok for metric purposes.
Related: https://github.com/neondatabase/cloud/issues/20666
## Problem
For cancellation, a connection is open during all the cancel checks.
## Summary of changes
Spawn cancellation checks in the background, and close connection
immediately.
Use task_tracker for cancellation checks.
## Problem
possible for the database connections to not close in time.
## Summary of changes
force the closing of connections if the client has hung up
## Problem
In a recent refactor, we accidentally dropped the cancel session early
## Summary of changes
Hold the cancel session during proxy passthrough
## Problem
Not really a problem, just refactoring.
## Summary of changes
Separate authenticate from wake compute.
Do not call wake compute second time if we managed to connect to
postgres or if we got it not from cache.
## Problem
hard to see where time is taken during HTTP flow.
## Summary of changes
add a lot more for query state. add a conn_id field to the sql-over-http
span
## Problem
`tokio::io::copy_bidirectional` doesn't close the connection once one of
the sides closes it. It's not really suitable for the postgres protocol.
## Summary of changes
Fork `copy_bidirectional` and initiate a shutdown for both connections.
---------
Co-authored-by: Conrad Ludgate <conradludgate@gmail.com>
There is currently no cleanup done after a delta layer creation error,
so delta layers can accumulate. The problem gets worse as the operation
gets retried and delta layers accumulate on the disk. Therefore, delete
them from disk (if something has been written to disk).
## Problem
When a tenant is in Attaching state, and waiting for the
`concurrent_tenant_warmup` semaphore, it also listens for the tenant
cancellation token. When that token fires, Tenant::attach drops out.
Meanwhile, Tenant::set_stopping waits forever for the tenant to exit
Attaching state.
Fixes: https://github.com/neondatabase/neon/issues/6423
## Summary of changes
- In the absence of a valid state for the tenant, it is set to Broken in
this path. A more elegant solution will require more refactoring, beyond
this minimal fix.
(cherry picked from commit 93572a3e99)
Before this patch, the select! still retured immediately if `futs` was
empty. Must have tested a stale build in my manual testing of #6388.
(cherry picked from commit 15c0df4de7)
To exercise MAX_SEND_SIZE sending from safekeeper; we've had a bug with WAL
records torn across several XLogData messages. Add failpoint to safekeeper to
slow down sending. Also check for corrupted WAL complains in standby log.
Make the test a bit simpler in passing, e.g. we don't need explicit commits as
autocommit is enabled by default.
https://neondb.slack.com/archives/C05L7D1JAUS/p1703774799114719https://github.com/neondatabase/cloud/issues/9057
Otherwise they are left orphaned when compute_ctl is terminated with a
signal. It was invisible most of the time because normally neon_local or k8s
kills postgres directly and then compute_ctl finishes gracefully. However, in
some tests compute_ctl gets stuck waiting for sync-safekeepers which
intentionally never ends because safekeepers are offline, and we want to stop
compute_ctl without leaving orphanes behind.
This is a quite rough approach which doesn't wait for children termination. A
better way would be to convert compute_ctl to async which would make waiting
easy.
Release 2023-12-19
We need to do a config change that requires restarting the pageservers.
Slip in two metrics-related commits that didn't make this week's regularly release.
Pre-merge `git merge --squash` of
https://github.com/neondatabase/neon/pull/6115
Lowering the tracing level in get_value_reconstruct_data and
get_or_maybe_download from info to debug reduces the overhead
of span creation in non-debug environments.
## Problem
#6112 added some logs and metrics: clean these up a bit:
- Avoid counting startup completions for tenants launched after startup
- exclude no-op cases from timing histograms
- remove a rogue log messages
Error indicating request cancellation OR timeline shutdown was deemed as
a reason to exit the background worker that calculated synthetic size.
Fix it to only be considered for avoiding logging such of such errors.
This conflicted on tenant_shard_id having already replaced tenant_id on
`main`.
```
could not start the compute node: compute is in state "failed": db error: ERROR: could not access file "$libdir/timescaledb-2.10.1": No such file or directory Caused by: ERROR: could not access file "$libdir/timescaledb-2.10.1": No such file or directory
```
Only applicable change was neondatabase/autoscaling#584, setting
pgbouncer auth_dbname=postgres in order to fix superuser connections
from preventing dropping databases.
Only applicable change was neondatabase/autoscaling#571, removing the
postgres_exporter flags `--auto-discover-databases` and
`--exclude-databases=...`
## Problem
Logical replication requires new AUX_FILES_KEY which is definitely
absent in existed database.
We do not have function to check if key exists in our KV storage.
So I have to handle the error in `list_aux_files` method.
But this key is also included in key space range and accessed y
`create_image_layer` method.
## Summary of changes
Check if AUX_FILES_KEY exists before including it in keyspace.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Shany Pozin <shany@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Fixes an issue we observed on staging that happens when the
autoscaler-agent attempts to immediately downscale the VM after binding,
which is typical for pooled computes.
The issue was occurring because the autoscaler-agent was requesting
downscaling before the vm-monitor had gathered sufficient cgroup memory
stats to be confident in approving it. When the vm-monitor returned an
internal error instead of denying downscaling, the autoscaler-agent
retried the connection and immediately hit the same issue (in part
because cgroup stats are collected per-connection, rather than
globally).
There's currently an issue with the vm-monitor on staging that's not
really feasible to debug because the current display impl gives no
context to the errors (just says "failed to downscale").
Logging the full error should help.
For communications with the autoscaler-agent, it's ok to only provide
the outermost cause, because we can cross-reference with the VM logs.
At some point in the future, we may want to change that.
tl;dr it's really hard to avoid throttling from memory.high, and it
counts tmpfs & page cache usage, so it's also hard to make sense of.
In the interest of fixing things quickly with something that should be
*good enough*, this PR switches to instead periodically fetch memory
statistics from the cgroup's memory.stat and use that data to determine
if and when we should upscale.
This PR fixes#5444, which has a lot more detail on the difficulties
we've hit with memory.high. This PR also supersedes #5488.
Before this PR, when we restarted pageserver, we'd see a rush of
`$number_of_tenants` concurrent eviction tasks starting to do imitate
accesses building up in the period of `[init_order allows activations,
$random_access_delay + EvictionPolicyLayerAccessThreshold::period]`.
We simply cannot handle that degree of concurrent IO.
We already solved the problem for compactions by adding a semaphore.
So, this PR shares that semaphore for use by evictions.
Part of https://github.com/neondatabase/neon/issues/5479
Which is again part of https://github.com/neondatabase/neon/issues/4743
Risks / Changes In System Behavior
==================================
* we don't do evictions as timely as we currently do
* we log a bunch of warnings about eviction taking too long
* imitate accesses and compactions compete for the same concurrency
limit, so, they'll slow each other down through this shares semaphore
Changes
=======
- Move the `CONCURRENT_COMPACTIONS` semaphore into `tasks.rs`
- Rename it to `CONCURRENT_BACKGROUND_TASKS`
- Use it also for the eviction imitate accesses:
- Imitate acceses are both per-TIMELINE and per-TENANT
- The per-TENANT is done through coalescing all the per-TIMELINE
tasks via a tokio mutex `eviction_task_tenant_state`.
- We acquire the CONCURRENT_BACKGROUND_TASKS permit early, at the
beginning of the eviction iteration, much before the imitate
acesses start (and they may not even start at all in the given
iteration, as they happen only every $threshold).
- Acquiring early is **sub-optimal** because when the per-timline
tasks coalesce on the `eviction_task_tenant_state` mutex,
they are already holding a CONCURRENT_BACKGROUND_TASKS permit.
- It's also unfair because tenants with many timelines win
the CONCURRENT_BACKGROUND_TASKS more often.
- I don't think there's another way though, without refactoring
more of the imitate accesses logic, e.g, making it all per-tenant.
- Add metrics for queue depth behind the semaphore.
I found these very useful to understand what work is queued in the
system.
- The metrics are tagged by the new `BackgroundLoopKind`.
- On a green slate, I would have used `TaskKind`, but we already had
pre-existing labels whose names didn't map exactly to task kind.
Also the task kind is kind of a lower-level detail, so, I think
it's fine to have a separate enum to identify background work kinds.
Future Work
===========
I guess I could move the eviction tasks from a ticker to "sleep for
$period".
The benefit would be that the semaphore automatically "smears" the
eviction task scheduling over time, so, we only have the rush on restart
but a smeared-out rush afterward.
The downside is that this perverts the meaning of "$period", as we'd
actually not run the eviction at a fixed period. It also means the the
"took to long" warning & metric becomes meaningless.
Then again, that is already the case for the compaction and gc tasks,
which do sleep for `$period` instead of using a ticker.
(cherry picked from commit 9256788273)
## Problem
Folks have re-taged releases for `pg_jsonschema` and `pg_graphql` (to
increase timeouts on their CI), for us, these are a noop changes,
but unfortunately, this will cause our builds to fail due to checksums
mismatch (this might not strike right away because of the build cache).
- 8ba7c7be9d
- aa7509370a
## Summary of changes
- `pg_jsonschema` update checksum
- `pg_graphql` update checksum
When you log more than a few blocks, you need to reserve the space in
advance. We didn't do that, so we got errors. Now we do that, and
shouldn't get errors.
## Problem
See https://neondb.slack.com/archives/C05L7D1JAUS/p1694614585955029https://www.notion.so/neondatabase/Duplicate-key-issue-651627ce843c45188fbdcb2d30fd2178
## Summary of changes
Swap old/new block references
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
The sequence that can lead to a deadlock:
1. DELETE request gets all the way to `tenant.shutdown(progress,
false).await.is_err() ` , while holding TENANTS.read()
2. POST request for tenant creation comes in, calls `tenant_map_insert`,
it does `let mut guard = TENANTS.write().await;`
3. Something that `tenant.shutdown()` needs to wait for needs a
`TENANTS.read().await`.
The only case identified in exhaustive manual scanning of the code base
is this one:
Imitate size access does `get_tenant().await`, which does
`TENANTS.read().await` under the hood.
In the above case (1) waits for (3), (3)'s read-lock request is queued
behind (2)'s write-lock, and (2) waits for (1).
Deadlock.
I made a reproducer/proof-that-above-hypothesis-holds in
https://github.com/neondatabase/neon/pull/5281 , but, it's not ready for
merge yet and we want the fix _now_.
fixes https://github.com/neondatabase/neon/issues/5284
## Problem
We were returning Pending when a connection had a notice/notification
(introduced recently in #5020). When returning pending, the runtime
assumes you will call `cx.waker().wake()` in order to continue
processing.
We weren't doing that, so the connection task would get stuck
## Summary of changes
Don't return pending. Loop instead
## Problem
cargo deny lint broken
Links to the CVEs:
[rustsec.org/advisories/RUSTSEC-2023-0052](https://rustsec.org/advisories/RUSTSEC-2023-0052)
[rustsec.org/advisories/RUSTSEC-2023-0053](https://rustsec.org/advisories/RUSTSEC-2023-0053)
One is fixed, the other one isn't so we allow it (for now), to unbreak
CI. Then later we'll try to get rid of webpki in favour of the rustls
fork.
## Summary of changes
```
+ignore = ["RUSTSEC-2023-0052"]
```
## Problem
When an endpoint is shutting down, it can take a few seconds. Currently
when starting a new compute, this causes an "endpoint is in transition"
error. We need to add delays before retrying to ensure that we allow
time for the endpoint to shutdown properly.
## Summary of changes
Adds a delay before retrying in auth. connect_to_compute already has
this delay
commit
commit 5f8fd640bf
Author: Alek Westover <alek.westover@gmail.com>
Date: Wed Jul 26 08:24:03 2023 -0400
Upload Test Remote Extensions (#4792)
switched to using the release tag instead of `latest`, but,
the `promote-images` job only uploads `latest` to the prod ECR.
The switch to using release tag was good in principle, but,
reverting that part to make the release pipeine work.
Note that a proper fix should abandon use of `:latest` tag
at all: currently, if a `main` pipeline runs concurrently
with a `release` pipeline, the `release` pipeline may end
up using the `main` pipeline's images.
## Problem
If we fail to wake up the compute node, a subsequent connect attempt
will definitely fail. However, kubernetes won't fail the connection
immediately, instead it hangs until we timeout (10s).
## Summary of changes
Refactor the loop to allow fast retries of compute_wake and to skip a
connect attempt.
## Problem
#4598 compute nodes are not accessible some time after wake up due to
kubernetes DNS not being fully propagated.
## Summary of changes
Update connect retry mechanism to support handling IO errors and
sleeping for 100ms
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
```
CREATE EXTENSION embedding;
CREATE TABLE t (val real[]);
INSERT INTO t (val) VALUES ('{0,0,0}'), ('{1,2,3}'), ('{1,1,1}'), (NULL);
CREATE INDEX ON t USING hnsw (val) WITH (maxelements = 10, dims=3, m=3);
INSERT INTO t (val) VALUES (array[1,2,4]);
SELECT * FROM t ORDER BY val <-> array[3,3,3];
val
---------
{1,2,3}
{1,2,4}
{1,1,1}
{0,0,0}
(5 rows)
```
The consumption metrics synthetic size worker does logical size calculation.
Logical size calculation currently does synchronous disk IO.
This blocks the MGMT_REQUEST_RUNTIME's executor threads, starving other futures.
While there's work on the way to move the synchronous disk IO into spawn_blocking,
the quickfix here is to use the BACKGROUND_RUNTIME instead of MGMT_REQUEST_RUNTIME.
Actually it's not just a quickfix. We simply shouldn't be blocking MGMT_REQUEST_RUNTIME
executor threads on CPU or sync disk IO.
That work isn't done yet, as many of the mgmt tasks still _do_ disk IO.
But it's not as intensive as the logical size calculations that we're fixing here.
While we're at it, fix disk-usage-based eviction in a similar way.
It wasn't the culprit here, according to prod logs, but it can theoretically be
a little CPU-intensive.
More context, including graphs from Prod:
https://neondb.slack.com/archives/C03F5SM1N02/p1687541681336949
(cherry picked from commit d6e35222ea)
This commit introduces an SQL-over-HTTP endpoint in the proxy, with a JSON
response structure resembling that of the node-postgres driver. This method,
using HTTP POST, achieves smaller amortized latencies in edge setups due to
fewer round trips and an enhanced open connection reuse by the v8 engine.
This update involves several intricacies:
1. SQL injection protection: We employed the extended query protocol, modifying
the rust-postgres driver to send queries in one roundtrip using a text
protocol rather than binary, bypassing potential issues like those identified
in https://github.com/sfackler/rust-postgres/issues/1030.
2. Postgres type compatibility: As not all postgres types have binary
representations (e.g., acl's in pg_class), we adjusted rust-postgres to
respond with text protocol, simplifying serialization and fixing queries with
text-only types in response.
3. Data type conversion: Considering JSON supports fewer data types than
Postgres, we perform conversions where possible, passing all other types as
strings. Key conversions include:
- postgres int2, int4, float4, float8 -> json number (NaN and Inf remain
text)
- postgres bool, null, text -> json bool, null, string
- postgres array -> json array
- postgres json and jsonb -> json object
4. Alignment with node-postgres: To facilitate integration with js libraries,
we've matched the response structure of node-postgres, returning command tags
and column oids. Command tag capturing was added to the rust-postgres
functionality as part of this change.
## Problem
Compatibility tests don't support Postgres 15 yet, but we're still
trying to upload compatibility snapshot (which we do not collect).
Ref
https://github.com/neondatabase/neon/actions/runs/4991394158/jobs/8940369368#step:4:38129
## Summary of changes
Add `pg_version` parameter to `run-python-test-set` actions and do not
upload compatibility snapshot for Postgres 15
This reverts commit 732acc5.
Reverted PR: #3869
As noted in PR #4094, we do in fact try to insert duplicates to the
layer map, if L0->L1 compaction is interrupted. We do not have a proper
fix for that right now, and we are in a hurry to make a release to
production, so revert the changes related to this to the state that we
have in production currently. We know that we have a bug here, but
better to live with the bug that we've had in production for a long
time, than rush a fix to production without testing it in staging first.
Cc: #4094, #4088
Otherwise they get lost. Normally buffer is empty before proxy pass, but this is
not the case with pipeline mode of out npm driver; fixes connection hangup
introduced by b80fe41af3 for it.
fixes https://github.com/neondatabase/neon/issues/3822
## Describe your changes
We have previously changed the neon-proxy to use RollingUpdate. This
should be enabled in legacy proxy too in order to avoid breaking
connections for the clients and allow for example backups to run even
during deployment. (https://github.com/neondatabase/neon/pull/3683)
## Issue ticket number and link
https://github.com/neondatabase/neon/issues/3333
## Describe your changes
Rebase vendored PostgreSQL onto 14.7 and 15.2
## Issue ticket number and link
#3579
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [x] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
```
The version of PostgreSQL that we use is updated to 14.7 for PostgreSQL
14 and 15.2 for PostgreSQL 15.
```
previously we applied the ratelimiting only up to receiving the headers
from s3, or somewhere near it. the commit adds an adapter which carries
the permit until the AsyncRead has been disposed.
fixes#3662.
Calculation of logical size is now async because of layer downloads, so
we shouldn't use spawn_blocking for it. Use of `spawn_blocking`
exhausted resources which are needed by `tokio::io::copy` when copying
from a stream to a file which lead to deadlock.
Fixes: #3657
these are happening in tests because of #3655 but they sure took some
time to appear.
makes the `Compaction failed, retrying in 2s: Cannot run compaction
iteration on inactive tenant` into a globally allowed error, because it
has been seen failing on different test cases.
Small changes, but hopefully this will help with the panic detected in
staging, for which we cannot get the debugging information right now
(end-of-branch before branch-point).
Before only the timelines which have passed the `gc_horizon` were
processed which failed with orphans at the tree_sort phase. Example
input in added `test_branched_empty_timeline_size` test case.
The PR changes iteration to happen through all timelines, and in
addition to that, any learned branch points will be calculated as they
would had been in the original implementation if the ancestor branch had
been over the `gc_horizon`.
This also changes how tenants where all timelines are below `gc_horizon`
are handled. Previously tenant_size 0 was returned, but now they will
have approximately `initdb_lsn` worth of tenant_size.
The PR also adds several new tenant size tests that describe various corner
cases of branching structure and `gc_horizon` setting.
They are currently disabled to not consume time during CI.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Previously, we were trying to re-assign owned objects of the already
deleted role. This were causing a crash loop in the case when compute
was restarted with a spec that includes delta operation for role
deletion. To avoid such cases, check that role is still present before
calling `reassign_owned_objects`.
Resolvesneondatabase/cloud#3553
This reverts commit 826e89b9ce.
The problem with that commit was that it deletes the TempDir while
there are still EphemeralFile instances open.
At first I thought this could be fixed by simply adding
Handle::current().block_on(task_mgr::shutdown(None, Some(tenant_id), None))
to TenantHarness::drop, but it turned out to be insufficient.
So, reverting the commit until we find a proper solution.
refs https://github.com/neondatabase/neon/issues/3385
Refactors Compute::prepare_and_run. It's split into subroutines
differently, to make it easier to attach tracing spans to the
different stages. The high-level logic for waiting for Postgres to
exit is moved to the caller.
Replace 'env_logger' with 'tracing', and add `#instrument` directives
to different stages fo the startup process. This is a fairly
mechanical change, except for the changes in 'spec.rs'. 'spec.rs'
contained some complicated formatting, where parts of log messages
were printed directly to stdout with `print`s. That was a bit messed
up because the log normally goes to stderr, but those lines were
printed to stdout. In our docker images, stderr and stdout both go to
the same place so you wouldn't notice, but I don't think it was
intentional.
This changes the log format to the default
'tracing_subscriber::format' format. It's different from the Postgres
log format, however, and because both compute_tools and Postgres print
to the same log, it's now a mix of two different formats. I'm not
sure how the Grafana log parsing pipeline can handle that. If it's a
problem, we can build custom formatter to change the compute_tools log
format to be the same as Postgres's, like it was before this commit,
or we can change the Postgres log format to match tracing_formatter's,
or we can start printing compute_tool's log output to a different
destination than Postgres
IMDSv2 has limits, and if we query it on every s3 interaction we are
going to go over those limits. Changes the s3_bucket client
configuration to use:
- ChainCredentialsProvider to handle env variables or imds usage
- LazyCachingCredentialsProvider to actually cache any credentials
Related: https://github.com/awslabs/aws-sdk-rust/issues/629
Possibly related: https://github.com/neondatabase/neon/issues/3118
plv8 can only be built with a fairly new gold linker version. We used to install
it via binutils packages from testing, but it also updates libc and that causes
troubles in the resulting image as different extensions were built against
different libc versions. We could either use libc from debian-testing everywhere
or restrain from using testing packages and install necessary programs manually.
This patch uses the latter approach: gold for plv8 and cmake for h3 are
installed manually.
In a passing declare h3_postgis as a safe extension (previous omission).
`GRANT CREATE ON SCHEMA public` fails if there is no schema `public`.
Disable it in release for now and make a better fix later (it is
needed for v15 support).
* Check for entire range during sasl validation (#2281)
* Gen2 GH runner (#2128)
* Re-add rustup override
* Try s3 bucket
* Set git version
* Use v4 cache key to prevent problems
* Switch to v5 for key
* Add second rustup fix
* Rebase
* Add kaniko steps
* Fix typo and set compress level
* Disable global run default
* Specify shell for step
* Change approach with kaniko
* Try less verbose shell spec
* Add submodule pull
* Add promote step
* Adjust dependency chain
* Try default swap again
* Use env
* Don't override aws key
* Make kaniko build conditional
* Specify runs on
* Try without dependency link
* Try soft fail
* Use image with git
* Try passing to next step
* Fix duplicate
* Try other approach
* Try other approach
* Fix typo
* Try other syntax
* Set env
* Adjust setup
* Try step 1
* Add link
* Try global env
* Fix mistake
* Debug
* Try other syntax
* Try other approach
* Change order
* Move output one step down
* Put output up one level
* Try other syntax
* Skip build
* Try output
* Re-enable build
* Try other syntax
* Skip middle step
* Update check
* Try first step of dockerhub push
* Update needs dependency
* Try explicit dir
* Add missing package
* Try other approach
* Try other approach
* Specify region
* Use with
* Try other approach
* Add debug
* Try other approach
* Set region
* Follow AWS example
* Try github approach
* Skip Qemu
* Try stdin
* Missing steps
* Add missing close
* Add echo debug
* Try v2 endpoint
* Use v1 endpoint
* Try without quotes
* Revert
* Try crane
* Add debug
* Split steps
* Fix duplicate
* Add shell step
* Conform to options
* Add verbose flag
* Try single step
* Try workaround
* First request fails hunch
* Try bullseye image
* Try other approach
* Adjust verbose level
* Try previous step
* Add more debug
* Remove debug step
* Remove rogue indent
* Try with larger image
* Add build tag step
* Update workflow for testing
* Add tag step for test
* Remove unused
* Update dependency chain
* Add ownership fix
* Use matrix for promote
* Force update
* Force build
* Remove unused
* Add new image
* Add missing argument
* Update dockerfile copy
* Update Dockerfile
* Update clone
* Update dockerfile
* Go to correct folder
* Use correct format
* Update dockerfile
* Remove cd
* Debug find where we are
* Add debug on first step
* Changedir to postgres
* Set workdir
* Use v1 approach
* Use other dependency
* Try other approach
* Try other approach
* Update dockerfile
* Update approach
* Update dockerfile
* Update approach
* Update dockerfile
* Update dockerfile
* Add workspace hack
* Update Dockerfile
* Update Dockerfile
* Update Dockerfile
* Change last step
* Cleanup pull in prep for review
* Force build images
* Add condition for latest tagging
* Use pinned version
* Try without name value
* Remove more names
* Shorten names
* Add kaniko comments
* Pin kaniko
* Pin crane and ecr helper
* Up one level
* Switch to pinned tag for rust image
* Force update for test
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@b04468bf-cdf4-41eb-9c94-aff4ca55e4bf.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@Rorys-Mac-Studio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@4795e9ee-4f32-401f-85f3-f316263b62b8.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@2f8bc4e5-4ec2-4ea2-adb1-65d863c4a558.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@27565b2b-72d5-4742-9898-a26c9033e6f9.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@ecc96c26-c6c4-4664-be6e-34f7c3f89a3c.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@7caff3a5-bf03-4202-bd0e-f1a93c86bdae.fritz.box>
* Add missing step output, revert one deploy step (#2285)
* Add missing step output, revert one deploy step
* Conform to syntax
* Update approach
* Add missing value
* Add missing needs
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Error for fatal not git repo (#2286)
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Use main, not branch for ref check (#2288)
* Use main, not branch for ref check
* Add more debug
* Count main, not head
* Try new approach
* Conform to syntax
* Update approach
* Get full history
* Skip checkout
* Cleanup debug
* Remove more debug
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Fix docker zombie process issue (#2289)
* Fix docker zombie process issue
* Init everywhere
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Fix 1.63 clippy lints (#2282)
* split out timeline metrics, track layer map loading and size calculation
* reset rust cache for clippy run to avoid an ICE
additionally remove trailing whitespaces
* Rename pg_control_ffi.h to bindgen_deps.h, for clarity.
The pg_control_ffi.h name implies that it only includes stuff related to
pg_control.h. That's mostly true currently, but really the point of the
file is to include everything that we need to generate Rust definitions
from.
* Make local mypy behave like CI mypy (#2291)
* Fix flaky pageserver restarts in tests (#2261)
* Remove extra type aliases (#2280)
* Update cachepot endpoint (#2290)
* Update cachepot endpoint
* Update dockerfile & remove env
* Update image building process
* Cannot use metadata endpoint for this
* Update workflow
* Conform to kaniko syntax
* Update syntax
* Update approach
* Update dockerfiles
* Force update
* Update dockerfiles
* Update dockerfile
* Cleanup dockerfiles
* Update s3 test location
* Revert s3 experiment
* Add more debug
* Specify aws region
* Remove debug, add prefix
* Remove one more debug
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* workflows/benchmarking: increase timeout (#2294)
* Rework `init` in pageserver CLI (#2272)
* Do not create initial tenant and timeline (adjust Python tests for that)
* Rework config handling during init, add --update-config to manage local config updates
* Fix: Always build images (#2296)
* Always build images
* Remove unused
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Move auto-generated 'bindings' to a separate inner module.
Re-export only things that are used by other modules.
In the future, I'm imagining that we run bindgen twice, for Postgres
v14 and v15. The two sets of bindings would go into separate
'bindings_v14' and 'bindings_v15' modules.
Rearrange postgres_ffi modules.
Move function, to avoid Postgres version dependency in timelines.rs
Move function to generate a logical-message WAL record to postgres_ffi.
* fix cargo test
* Fix walreceiver and safekeeper bugs (#2295)
- There was an issue with zero commit_lsn `reason: LaggingWal { current_commit_lsn: 0/0, new_commit_lsn: 1/6FD90D38, threshold: 10485760 } }`. The problem was in `send_wal.rs`, where we initialized `end_pos = Lsn(0)` and in some cases sent it to the pageserver.
- IDENTIFY_SYSTEM previously returned `flush_lsn` as a physical end of WAL. Now it returns `flush_lsn` (as it was) to walproposer and `commit_lsn` to everyone else including pageserver.
- There was an issue with backoff where connection was cancelled right after initialization: `connected!` -> `safekeeper_handle_db: Connection cancelled` -> `Backoff: waiting 3 seconds`. The problem was in sleeping before establishing the connection. This is fixed by reworking retry logic.
- There was an issue with getting `NoKeepAlives` reason in a loop. The issue is probably the same as the previous.
- There was an issue with filtering safekeepers based on retry attempts, which could filter some safekeepers indefinetely. This is fixed by using retry cooldown duration instead of retry attempts.
- Some `send_wal.rs` connections failed with errors without context. This is fixed by adding a timeline to safekeepers errors.
New retry logic works like this:
- Every candidate has a `next_retry_at` timestamp and is not considered for connection until that moment
- When walreceiver connection is closed, we update `next_retry_at` using exponential backoff, increasing the cooldown on every disconnect.
- When `last_record_lsn` was advanced using the WAL from the safekeeper, we reset the retry cooldown and exponential backoff, allowing walreceiver to reconnect to the same safekeeper instantly.
* on safekeeper registration pass availability zone param (#2292)
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Rory de Zoete <33318916+zoete@users.noreply.github.com>
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@b04468bf-cdf4-41eb-9c94-aff4ca55e4bf.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@Rorys-Mac-Studio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@4795e9ee-4f32-401f-85f3-f316263b62b8.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@2f8bc4e5-4ec2-4ea2-adb1-65d863c4a558.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@27565b2b-72d5-4742-9898-a26c9033e6f9.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@ecc96c26-c6c4-4664-be6e-34f7c3f89a3c.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@7caff3a5-bf03-4202-bd0e-f1a93c86bdae.fritz.box>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Anton Galitsyn <agalitsyn@users.noreply.github.com>
* github/workflows: Fix git dubious ownership (#2223)
* Move relation size cache from WalIngest to DatadirTimeline (#2094)
* Move relation sie cache to layered timeline
* Fix obtaining current LSN for relation size cache
* Resolve merge conflicts
* Resolve merge conflicts
* Reestore 'lsn' field in DatadirModification
* adjust DatadirModification lsn in ingest_record
* Fix formatting
* Pass lsn to get_relsize
* Fix merge conflict
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* refactor: replace lazy-static with once-cell (#2195)
- Replacing all the occurrences of lazy-static with `once-cell::sync::Lazy`
- fixes#1147
Signed-off-by: Ankur Srivastava <best.ankur@gmail.com>
* Add more buckets to pageserver latency metrics (#2225)
* ignore record property warning to fix benchmarks
* increase statement timeout
* use event so it fires only if workload thread successfully finished
* remove debug log
* increase timeout to pass test with real s3
* avoid duplicate parameter, increase timeout
* Major migration script (#2073)
This script can be used to migrate a tenant across breaking storage versions, or (in the future) upgrading postgres versions. See the comment at the top for an overview.
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
* Fix etcd typos
* Fix links to safekeeper protocol docs. (#2188)
safekeeper/README_PROTO.md was moved to docs/safekeeper-protocol.md in
commit 0b14fdb078, as part of reorganizing the docs into 'mdbook' format.
Fixes issue #1475. Thanks to @banks for spotting the outdated references.
In addition to fixing the above issue, this patch also fixes other broken links as a result of 0b14fdb078. See https://github.com/neondatabase/neon/pull/2188#pullrequestreview-1055918480.
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Thang Pham <thang@neon.tech>
* Update CONTRIBUTING.md
* Update CONTRIBUTING.md
* support node id and remote storage params in docker_entrypoint.sh
* Safe truncate (#2218)
* Move relation sie cache to layered timeline
* Fix obtaining current LSN for relation size cache
* Resolve merge conflicts
* Resolve merge conflicts
* Reestore 'lsn' field in DatadirModification
* adjust DatadirModification lsn in ingest_record
* Fix formatting
* Pass lsn to get_relsize
* Fix merge conflict
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Check if relation exists before trying to truncat it
refer #1932
* Add test reporducing FSM truncate problem
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Fix exponential backoff values
* Update back `vendor/postgres` back; it was changed accidentally. (#2251)
Commit 4227cfc96e accidentally reverted vendor/postgres to an older
version. Update it back.
* Add pageserver checkpoint_timeout option.
To flush inmemory layer eventually when no new data arrives, which helps
safekeepers to suspend activity (stop pushing to the broker). Default 10m should
be ok.
* Share exponential backoff code and fix logic for delete task failure (#2252)
* Fix bug when import large (>1GB) relations (#2172)
Resolves#2097
- use timeline modification's `lsn` and timeline's `last_record_lsn` to determine the corresponding LSN to query data in `DatadirModification::get`
- update `test_import_from_pageserver`. Split the test into 2 variants: `small` and `multisegment`.
+ `small` is the old test
+ `multisegment` is to simulate #2097 by using a larger number of inserted rows to create multiple segment files of a relation. `multisegment` is configured to only run with a `release` build
* Fix timeline physical size flaky tests (#2244)
Resolves#2212.
- use `wait_for_last_flush_lsn` in `test_timeline_physical_size_*` tests
## Context
Need to wait for the pageserver to catch up with the compute's last flush LSN because during the timeline physical size API call, it's possible that there are running `LayerFlushThread` threads. These threads flush new layers into disk and hence update the physical size. This results in a mismatch between the physical size reported by the API and the actual physical size on disk.
### Note
The `LayerFlushThread` threads are processed **concurrently**, so it's possible that the above error still persists even with this patch. However, making the tests wait to finish processing all the WALs (not flushing) before calculating the physical size should help reduce the "flakiness" significantly
* postgres_ffi/waldecoder: validate more header fields
* postgres_ffi/waldecoder: remove unused startlsn
* postgres_ffi/waldecoder: introduce explicit `enum State`
Previously it was emulated with a combination of nullable fields.
This change should make the logic more readable.
* disable `test_import_from_pageserver_multisegment` (#2258)
This test failed consistently on `main` now. It's better to temporarily disable it to avoid blocking others' PRs while investigating the root cause for the test failure.
See: #2255, #2256
* get_binaries uses DOCKER_TAG taken from docker image build step (#2260)
* [proxy] Rework wire format of the password hack and some errors (#2236)
The new format has a few benefits: it's shorter, simpler and
human-readable as well. We don't use base64 anymore, since
url encoding got us covered.
We also show a better error in case we couldn't parse the
payload; the users should know it's all about passing the
correct project name.
* test_runner/pg_clients: collect docker logs (#2259)
* get_binaries script fix (#2263)
* get_binaries uses DOCKER_TAG taken from docker image build step
* remove docker tag discovery at all and fix get_binaries for version variable
* Better storage sync logs (#2268)
* Find end of WAL on safekeepers using WalStreamDecoder.
We could make it inside wal_storage.rs, but taking into account that
- wal_storage.rs reading is async
- we don't need s3 here
- error handling is different; error during decoding is normal
I decided to put it separately.
Test
cargo test test_find_end_of_wal_last_crossing_segment
prepared earlier by @yeputons passes now.
Fixes https://github.com/neondatabase/neon/issues/544https://github.com/neondatabase/cloud/issues/2004
Supersedes https://github.com/neondatabase/neon/pull/2066
* Improve walreceiver logic (#2253)
This patch makes walreceiver logic more complicated, but it should work better in most cases. Added `test_wal_lagging` to test scenarios where alive safekeepers can lag behind other alive safekeepers.
- There was a bug which looks like `etcd_info.timeline.commit_lsn > Some(self.local_timeline.get_last_record_lsn())` filtered all safekeepers in some strange cases. I removed this filter, it should probably help with #2237
- Now walreceiver_connection reports status, including commit_lsn. This allows keeping safekeeper connection even when etcd is down.
- Safekeeper connection now fails if pageserver doesn't receive safekeeper messages for some time. Usually safekeeper sends messages at least once per second.
- `LaggingWal` check now uses `commit_lsn` directly from safekeeper. This fixes the issue with often reconnects, when compute generates WAL really fast.
- `NoWalTimeout` is rewritten to trigger only when we know about the new WAL and the connected safekeeper doesn't stream any WAL. This allows setting a small `lagging_wal_timeout` because it will trigger only when we observe that the connected safekeeper has stuck.
* increase timeout in wait_for_upload to avoid spurious failures when testing with real s3
* Bump vendor/postgres to include XLP_FIRST_IS_CONTRECORD fix. (#2274)
* Set up a workflow to run pgbench against captest (#2077)
Signed-off-by: Ankur Srivastava <best.ankur@gmail.com>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@garret.ru>
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
Co-authored-by: Ankur Srivastava <ansrivas@users.noreply.github.com>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Thang Pham <thang@neon.tech>
Co-authored-by: Stas Kelvich <stas.kelvich@gmail.com>
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
Co-authored-by: Egor Suvorov <egor@neon.tech>
Co-authored-by: Andrey Taranik <andrey@cicd.team>
Co-authored-by: Dmitry Ivanov <ivadmi5@gmail.com>
[HOTFIX] Release deploy fix
This PR uses this branch neondatabase/postgres#171 and several required commits from the main to use only locally built compute-tools. This should allow us to rollout safekeepers sync issue fix on prod
# `!failure() && !cancelled()` is required because the workflow transitively depends on the job that can be skipped: `push-to-acr-dev` and `push-to-acr-prod`
storage_broker={version="0.1",path="./storage_broker/"}# Note: main broker code is inside the binary crate, so linking with the library shouldn't be heavy.
@@ -54,24 +54,30 @@ ALTER ROLE regress_passwd2_new RENAME TO regress_passwd2;
@@ -54,24 +54,16 @@ ALTER ROLE regress_passwd2_new RENAME TO regress_passwd2;
-- passwords.
SET password_encryption = 'md5';
-- encrypt with MD5
-ALTER ROLE regress_passwd2 PASSWORD 'foo';
--- already encrypted, use as they are
-ALTER ROLE regress_passwd1 PASSWORD 'md5cd3578025fe2c3d7ed1b9a9b26238b70';
-ALTER ROLE regress_passwd3 PASSWORD 'SCRAM-SHA-256$4096:VLK4RMaQLCvNtQ==$6YtlR4t69SguDiwFvbVgVZtuz6gpJQQqUMZ7IQJK5yI=:ps75jrHeYU4lXCcXI4O8oIdJ3eO8o2jirjruw9phBTo=';
+ALTER ROLE regress_passwd2 PASSWORD NEON_PASSWORD_PLACEHOLDER;
-- already encrypted, use as they are
ALTER ROLE regress_passwd1 PASSWORD 'md5cd3578025fe2c3d7ed1b9a9b26238b70';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
ALTER ROLE regress_passwd3 PASSWORD 'SCRAM-SHA-256$4096:VLK4RMaQLCvNtQ==$6YtlR4t69SguDiwFvbVgVZtuz6gpJQQqUMZ7IQJK5yI=:ps75jrHeYU4lXCcXI4O8oIdJ3eO8o2jirjruw9phBTo=';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
SET password_encryption = 'scram-sha-256';
-- create SCRAM secret
-ALTER ROLE regress_passwd4 PASSWORD 'foo';
--- already encrypted with MD5, use as it is
-CREATE ROLE regress_passwd5 PASSWORD 'md5e73a4b11df52a6068f8b39f90be36023';
--- This looks like a valid SCRAM-SHA-256 secret, but it is not
--- so it should be hashed with SCRAM-SHA-256.
-CREATE ROLE regress_passwd6 PASSWORD 'SCRAM-SHA-256$1234';
--- These may look like valid MD5 secrets, but they are not, so they
--- should be hashed with SCRAM-SHA-256.
--- trailing garbage at the end
-CREATE ROLE regress_passwd7 PASSWORD 'md5012345678901234567890123456789zz';
--- invalid length
-CREATE ROLE regress_passwd8 PASSWORD 'md501234567890123456789012345678901zz';
+ALTER ROLE regress_passwd4 PASSWORD NEON_PASSWORD_PLACEHOLDER;
-- already encrypted with MD5, use as it is
CREATE ROLE regress_passwd5 PASSWORD 'md5e73a4b11df52a6068f8b39f90be36023';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
-- This looks like a valid SCRAM-SHA-256 secret, but it is not
-- so it should be hashed with SCRAM-SHA-256.
CREATE ROLE regress_passwd6 PASSWORD 'SCRAM-SHA-256$1234';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
-- These may look like valid MD5 secrets, but they are not, so they
-- should be hashed with SCRAM-SHA-256.
-- trailing garbage at the end
CREATE ROLE regress_passwd7 PASSWORD 'md5012345678901234567890123456789zz';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
-- invalid length
CREATE ROLE regress_passwd8 PASSWORD 'md501234567890123456789012345678901zz';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
+-- Neon does not support encrypted passwords, use unencrypted instead
+CREATE ROLE regress_passwd5 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+-- Neon does not support encrypted passwords, use unencrypted instead
+CREATE ROLE regress_passwd6 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+CREATE ROLE regress_passwd7 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+CREATE ROLE regress_passwd8 PASSWORD NEON_PASSWORD_PLACEHOLDER;
-- Changing the SCRAM iteration count
SET scram_iterations = 1024;
CREATE ROLE regress_passwd9 PASSWORD 'alterediterationcount';
NOTICE: empty string is not a valid password, clearing password
@@ -1082,56 +1080,37 @@ index 8475231735..1afae5395f 100644
-(1 row)
+(0 rows)
-- Test with invalid stored and server keys.
--
-- The first is valid, to act as a control. The others have too long
-- stored/server keys. They will be re-hashed.
CREATE ROLE regress_passwd_sha_len0 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96Rqw=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZI=';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
CREATE ROLE regress_passwd_sha_len1 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96RqwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZI=';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
CREATE ROLE regress_passwd_sha_len2 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96Rqw=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=';
+ERROR: Received HTTP code 400 from control plane: {"error":"Neon only supports being given plaintext passwords"}
--- Test with invalid stored and server keys.
---
--- The first is valid, to act as a control. The others have too long
--- stored/server keys. They will be re-hashed.
-CREATE ROLE regress_passwd_sha_len0 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96Rqw=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZI=';
-CREATE ROLE regress_passwd_sha_len1 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96RqwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZI=';
-CREATE ROLE regress_passwd_sha_len2 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96Rqw=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=';
+-- Neon does not support encrypted passwords, use unencrypted instead
+CREATE ROLE regress_passwd_sha_len0 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+CREATE ROLE regress_passwd_sha_len1 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+CREATE ROLE regress_passwd_sha_len2 PASSWORD NEON_PASSWORD_PLACEHOLDER;
-- Check that the invalid secrets were re-hashed. A re-hashed secret
-- should not contain the original salt.
SELECT rolname, rolpassword not like '%A6xHKoH/494E941doaPOYg==%' as is_rolpassword_rehashed
FROM pg_authid
WHERE rolname LIKE 'regress_passwd_sha_len%'
@@ -120,7 +109,7 @@ SELECT rolname, rolpassword not like '%A6xHKoH/494E941doaPOYg==%' as is_rolpassw
@@ -10,11 +10,11 @@ SET password_encryption = 'scram-sha-256'; -- ok
@@ -3213,23 +3192,59 @@ index 53e86b0b6c..f07cf1ec54 100644
-- check list of created entries
--
@@ -42,14 +42,14 @@ ALTER ROLE regress_passwd2_new RENAME TO regress_passwd2;
@@ -42,26 +42,18 @@ ALTER ROLE regress_passwd2_new RENAME TO regress_passwd2;
SET password_encryption = 'md5';
-- encrypt with MD5
-ALTER ROLE regress_passwd2 PASSWORD 'foo';
--- already encrypted, use as they are
-ALTER ROLE regress_passwd1 PASSWORD 'md5cd3578025fe2c3d7ed1b9a9b26238b70';
-ALTER ROLE regress_passwd3 PASSWORD 'SCRAM-SHA-256$4096:VLK4RMaQLCvNtQ==$6YtlR4t69SguDiwFvbVgVZtuz6gpJQQqUMZ7IQJK5yI=:ps75jrHeYU4lXCcXI4O8oIdJ3eO8o2jirjruw9phBTo=';
+ALTER ROLE regress_passwd2 PASSWORD NEON_PASSWORD_PLACEHOLDER;
-- already encrypted, use as they are
ALTER ROLE regress_passwd1 PASSWORD 'md5cd3578025fe2c3d7ed1b9a9b26238b70';
ALTER ROLE regress_passwd3 PASSWORD 'SCRAM-SHA-256$4096:VLK4RMaQLCvNtQ==$6YtlR4t69SguDiwFvbVgVZtuz6gpJQQqUMZ7IQJK5yI=:ps75jrHeYU4lXCcXI4O8oIdJ3eO8o2jirjruw9phBTo=';
SET password_encryption = 'scram-sha-256';
-- create SCRAM secret
-ALTER ROLE regress_passwd4 PASSWORD 'foo';
--- already encrypted with MD5, use as it is
-CREATE ROLE regress_passwd5 PASSWORD 'md5e73a4b11df52a6068f8b39f90be36023';
+ALTER ROLE regress_passwd4 PASSWORD NEON_PASSWORD_PLACEHOLDER;
-- already encrypted with MD5, use as it is
CREATE ROLE regress_passwd5 PASSWORD 'md5e73a4b11df52a6068f8b39f90be36023';
+-- Neon does not support encrypted passwords, use unencrypted instead
+CREATE ROLE regress_passwd5 PASSWORD NEON_PASSWORD_PLACEHOLDER;
--- This looks like a valid SCRAM-SHA-256 secret, but it is not
--- so it should be hashed with SCRAM-SHA-256.
-CREATE ROLE regress_passwd6 PASSWORD 'SCRAM-SHA-256$1234';
--- These may look like valid MD5 secrets, but they are not, so they
--- should be hashed with SCRAM-SHA-256.
--- trailing garbage at the end
-CREATE ROLE regress_passwd7 PASSWORD 'md5012345678901234567890123456789zz';
--- invalid length
-CREATE ROLE regress_passwd8 PASSWORD 'md501234567890123456789012345678901zz';
+-- Neon does not support encrypted passwords, use unencrypted instead
+CREATE ROLE regress_passwd6 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+CREATE ROLE regress_passwd7 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+CREATE ROLE regress_passwd8 PASSWORD NEON_PASSWORD_PLACEHOLDER;
-- Changing the SCRAM iteration count
SET scram_iterations = 1024;
@@ -78,13 +70,10 @@ ALTER ROLE regress_passwd_empty PASSWORD 'md585939a5ce845f1a1b620742e3c659e0a';
ALTER ROLE regress_passwd_empty PASSWORD 'SCRAM-SHA-256$4096:hpFyHTUsSWcR7O9P$LgZFIt6Oqdo27ZFKbZ2nV+vtnYM995pDh9ca6WSi120=:qVV5NeluNfUPkwm7Vqat25RjSPLkGeoZBQs6wVv+um4=';
SELECT rolpassword FROM pg_authid WHERE rolname='regress_passwd_empty';
--- Test with invalid stored and server keys.
---
--- The first is valid, to act as a control. The others have too long
--- stored/server keys. They will be re-hashed.
-CREATE ROLE regress_passwd_sha_len0 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96Rqw=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZI=';
-CREATE ROLE regress_passwd_sha_len1 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96RqwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZI=';
-CREATE ROLE regress_passwd_sha_len2 PASSWORD 'SCRAM-SHA-256$4096:A6xHKoH/494E941doaPOYg==$Ky+A30sewHIH3VHQLRN9vYsuzlgNyGNKCh37dy96Rqw=:COPdlNiIkrsacU5QoxydEuOH6e/KfiipeETb/bPw8ZIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=';
+-- Neon does not support encrypted passwords, use unencrypted instead
+CREATE ROLE regress_passwd_sha_len0 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+CREATE ROLE regress_passwd_sha_len1 PASSWORD NEON_PASSWORD_PLACEHOLDER;
+CREATE ROLE regress_passwd_sha_len2 PASSWORD NEON_PASSWORD_PLACEHOLDER;
-- Check that the invalid secrets were re-hashed. A re-hashed secret
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
