We want to have timeline_written_size_delta which is defined as
difference to the previously sent `timeline_written_size` from the
current `timeline_written_size`.
Solution is to send it. On the first round `disk_consistent_lsn` is used
which is captured during `load` time. After that an incremental "event"
is sent on every collection. Incremental "events" are not part of
deduplication.
I've added some infrastructure to allow somewhat typesafe
`EventType::Absolute` and `EventType::Incremental` factories per
metrics, now that we have our first `EventType::Incremental` usage.
## Problem
Compatibility tests fail from time to time due to `pg_tenant_only_port`
port collision (added in https://github.com/neondatabase/neon/pull/4731)
## Summary of changes
- replace `pg_tenant_only_port` value in config with new port
- remove old logic, than we don't need anymore
- unify config overrides
## Problem
Wrong use of `conf.listen_pg_addr` in `error!()`.
## Summary of changes
Use `listen_pg_addr_tenant_only` instead of `conf.listen_pg_addr`.
Signed-off-by: yaoyinnan <35447132+yaoyinnan@users.noreply.github.com>
## Problem
1. In the CacheInvalid state loop, we weren't checking the
`num_retries`. If this managed to get up to `32`, the retry_after
procedure would compute 2^32 which would overflow to 0 and trigger a div
by zero
2. When fixing the above, I started working on a flow diagram for the
state machine logic and realised it was more complex than it had to be:
a. We start in a `Cached` state
b. `Cached`: call `connect_once`. After the first connect_once error, we
always move to the `CacheInvalid` state, otherwise, we return the
connection.
c. `CacheInvalid`: we attempt to `wake_compute` and we either switch to
Cached or we retry this step (or we error).
d. `Cached`: call `connect_once`. We either retry this step or we have a
connection (or we error) - After num_retries > 1 we never switch back to
`CacheInvalid`.
## Summary of changes
1. Insert a `num_retries` check in the `handle_try_wake` procedure. Also
using floats in the retry_after procedure to prevent the overflow
entirely
2. Refactor connect_to_compute to be more linear in design.
## Problem
Existing IndexPart unit tests only exercised the version 1 format (i.e.
without deleted_at set).
## Summary of changes
Add a test that sets version to 2, and sets a value for deleted_at.
Closes https://github.com/neondatabase/neon/issues/4162
## Problem
`DiskBtreeReader::dump` calls `read_blk` internally, which we want to
make async in the future. As it is currently relying on recursion, and
async doesn't like recursion, we want to find an alternative to that and
instead traverse the tree using a loop and a manual stack.
## Summary of changes
* Make `DiskBtreeReader::dump` and all the places calling it async
* Make `DiskBtreeReader::dump` non-recursive internally and use a stack
instead. It now deparses the node in each iteration, which isn't
optimal, but on the other hand it's hard to store the node as it is
referencing the buffer. Self referential data are hard in Rust. For a
dumping function, speed isn't a priority so we deparse the node multiple
times now (up to branching factor many times).
Part of https://github.com/neondatabase/neon/issues/4743
I have verified that output is unchanged by comparing the output of this
command both before and after this patch:
```
cargo test -p pageserver -- particular_data --nocapture
```
## Problem
ref https://github.com/neondatabase/neon/pull/4721, ref
https://github.com/neondatabase/neon/issues/4709
## Summary of changes
This PR adds unit tests for wake_compute.
The patch adds a new variant `Test` to auth backends. When
`wake_compute` is called, we will verify if it is the exact operation
sequence we are expecting. The operation sequence now contains 3 more
operations: `Wake`, `WakeRetry`, and `WakeFail`.
The unit tests for proxy connects are now complete and I'll continue
work on WebSocket e2e test in future PRs.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
See: https://neondb.slack.com/archives/C04USJQNLD6/p1689973957908869
## Summary of changes
Bump Postgres version
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We have some amount of outdated logic in test_compatibility, that we
don't need anymore.
## Summary of changes
- Remove `PR4425_ALLOWED_DIFF` and tune `dump_differs` method to accept
allowed diffs in the future (a cleanup after
https://github.com/neondatabase/neon/pull/4425)
- Remote etcd related code (a cleanup after
https://github.com/neondatabase/neon/pull/2733)
- Don't set `preserve_database_files`
Run `pg_amcheck` in forward and backward compatibility tests to catch
some data corruption.
## Summary of changes
- Add amcheck compiling to Makefile
- Add `pg_amcheck` to test_compatibility
The test was starting two endpoints on the same branch as discovered by
@petuhovskiy.
The fix is to allow passing branch-name from the python side over to
neon_local, which already accepted it.
Split from #4824, which will handle making this more misuse resistant.
error is not needed because anyhow will have the cause chain reported
anyways.
related to test_neon_cli_basics being flaky, but doesn't actually fix
any flakyness, just the obvious stray `{e}`.
## Problem
wake_compute can fail sometimes but is eligible for retries. We retry
during the main connect, but not during auth.
## Summary of changes
retry wake_compute during auth flow if there was an error talking to
control plane, or if there was a temporary error in waking the compute
node
## Problem
In https://github.com/neondatabase/neon/issues/4743 , I'm trying to make
more of the pageserver async, but in order for that to happen, I need to
be able to persist the result of `ImageLayer::load` across await points.
For that to happen, the return value needs to be `Send`.
## Summary of changes
Use `OnceLock` in the image layer instead of manually implementing it
with booleans, locks and `Option`.
Part of #4743
## Problem
The first session event we emit is after we receive the first startup
packet from the client. This means we can't detect any issues between
TCP open and handling of the first PG packet
## Summary of changes
Add some new logs for websocket upgrade and connection handling
## Problem
We've got an example of Allure reports from 2 different runners for the
same build that started to upload at the exact second, making one
overwrite another
## Summary of changes
- Use the Postgres version to distinguish artifacts (along with the
build type)
We need some real extensions in S3 to accurately test the code for
handling remote extensions.
In this PR we just upload three extensions (anon, kq_imcx and postgis), which is
enough for testing purposes for now. In addition to creating and
uploading the extension archives, we must generate a file
`ext_index.json` which specifies important metadata about the
extensions.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We want to measure how many users are using TCP/WS connections.
We also want to measure how long it takes to establish a connection with
the compute node.
I plan to also add a separate counter for HTTP requests, but because of
pooling this needs to be disambiguated against new HTTP compute
connections
## Summary of changes
* record connection type (ws/tcp) in the connection counters.
* record connection latency including retry latency
## Problem
Currently we delete local files first, so if pageserver restarts after
local files deletion then remote deletion is not continued. This can be
solved with inversion of these steps.
But even if these steps are inverted when index_part.json is deleted
there is no way to distinguish between "this timeline is good, we just
didnt upload it to remote" and "this timeline is deleted we should
continue with removal of local state". So to solve it we use another
mark file. After index part is deleted presence of this mark file
indentifies that it was a deletion intention.
Alternative approach that was discussed was to delete all except
metadata first, and then delete metadata and index part. In this case we
still do not support local only configs making them rather unsafe
(deletion in them is already unsafe, but this direction solidifies this
direction instead of fixing it). Another downside is that if we crash
after local metadata gets removed we may leave dangling index part on
the remote which in theory shouldnt be a big deal because the file is
small.
It is not a big change to choose another approach at this point.
## Summary of changes
Timeline deletion sequence:
1. Set deleted_at in remote index part.
2. Create local mark file.
3. Delete local files except metadata (it is simpler this way, to be
able to reuse timeline initialization code that expects metadata)
4. Delete remote layers
5. Delete index part
6. Delete meta, timeline directory.
7. Delete mark file.
This works for local only configuration without remote storage.
Sequence is resumable from any point.
resolves#4453
resolves https://github.com/neondatabase/neon/pull/4552 (the issue was
created with async cancellation in mind, but we can still have issues
with retries if metadata is deleted among the first by remove_dir_all
(which doesnt have any ordering guarantees))
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
This PR adds support for non-interactive transaction query endpoint.
It accepts an array of queries and parameters and returns an array of
query results. The queries will be run in a single transaction one
after another on the proxy side.
count only once; on startup create the counter right away because we
will not observe any changes later.
small, probably never reachable from outside fix for #4796.
We currently have a timeseries for each of the tenants in different
states. We only want this for Broken. Other states could be counters.
Fix this by making the `pageserver_tenant_states_count` a counter
without a `tenant_id` and
add a `pageserver_broken_tenants_count` which has a `tenant_id` label,
each broken tenant being 1.
Given now we've refactored `connect_to_compute` as a generic, we can
test it with mock backends. In this PR, we mock the error API and
connect_once API to test the retry behavior of `connect_to_compute`. In
the next PR, I'll add mock for credentials so that we can also test
behavior with `wake_compute`.
ref https://github.com/neondatabase/neon/issues/4709
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
In #4743, we'd like to convert the read path to use `async` rust. In
preparation of that, this PR switches some functions that are calling
lower level functions like `BlockReader::read_blk`,
`BlockCursor::read_blob`, etc into `async`. The PR does not switch all
functions however, and only focuses on the ones which are easy to
switch.
This leaves around some async functions that are (currently)
unnecessarily `async`, but on the other hand it makes future changes
smaller in diff.
Part of #4743 (but does not completely address it).
Fix mx_offset_to_flags_offset() function
Fixes issue #4774
Postgres `MXOffsetToFlagsOffset` was not correctly converted to Rust
because cast to u16 is done before division by modulo. It is possible
only if divider is power of two.
Add a small rust unit test to check that the function produces same results
as the PostgreSQL macro, and extend the existing python test to cover
this bug.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
