## Problem
Auto-offloading as requested by the compaction task is racy with
unarchival, in that the compaction task might attempt to offload an
unarchived timeline. By that point it will already have set the timeline
to the `Stopping` state however, which makes it unusable for any
purpose. For example:
1. compaction task decides to offload timeline
2. timeline gets unarchived
3. `offload_timeline` gets called by compaction task
* sets timeline's state to `Stopping`
* realizes that the timeline can't be unarchived, errors out
6. endpoint can't be started as the timeline is `Stopping` and thus
'can't be found'.
A future iteration of the compaction task can't "heal" this state either
as the timeline will still not be archived, same goes for other
automatic stuff. The only way to heal this is a tenant detach+attach, or
alternatively a pageserver restart.
Furthermore, the compaction task is especially amenable for such races
as it first stores `can_offload` into a variable, figures out whether
compaction is needed (which takes some time), and only then does it
attempt an offload operation: the time difference between "check" and
"use" is non-trivially small.
To make it even worse, we start the compaction task right after attach
of a tenant, and it is a common pattern by pageserver users to attach a
tenant to then immediately unarchive a timeline, so that an endpoint can
be started.
## Solutions not adopted
The simplest solution is to move the `can_offload` check to right before
attempting of the offload. But this is not a good solution, as no lock
is held between that check and timeline shutdown. So races would still
be possible, just become less likely.
I explored using the timeline state for this, as in adding an additional
enum variant. But `Timeline::set_state` is racy (#10297).
## Adopted solution
We use the lock on the timeline's upload queue as an arbiter: either
unarchival gets to it first and sours the state for auto-offloading, or
auto-offloading shuts it down, which stops any parallel unarchival in
its tracks. The key part is not releasing the upload queue's lock
between the check whether the timeline is archived or not, and shutting
it down (the actual implementation only sets `shutting_down` but it has
the same effect on `initialized_mut()` as a full shutdown). The rest of
the patch is stuff that follows from this.
We also move the part where we set the state to `Stopping` to after that
arbiter has decided the fate of the timeline. For deletions, we do keep
it inside `DeleteTimelineFlow::prepare` however, so that it is called
with all of the the timelines locks held that the function allocates
(timelines lock most importantly). This is only a precautionary measure
however, as I didn't want to analyze deletion related code for possible
races.
## Future changes
It might make sense to move `can_offload` to right before the offload
attempt. Maybe some other properties might have changed as well.
Although this will not be perfect either as no lock is held. I want to
keep it out of this change to emphasize that this move wasn't the main
reason we are race free now.
Fixes#10220
This is a refactor to create better abstractions related to our
management server. It cleans up the code, and prepares everything for
authorized communication to and from the control plane.
Signed-off-by: Tristan Partin <tristan@neon.tech>
We keep the practice of keeping the compiler up to date, pointing to the
latest release. This is done by many other projects in the Rust
ecosystem as well.
[Release notes](https://releases.rs/docs/1.84.0/).
Prior update was in #9926.
## Problem
In Postgres, one cannot drop a role if it has any dependent objects in
the DB. In `compute_ctl`, we automatically reassign all dependent
objects in every DB to the corresponding DB owner. Yet, it seems that it
doesn't help with some implicit permissions. The issue is reproduced by
installing a `postgis` extension because it creates some views and
tables in the public schema.
## Summary of changes
Added a repro test without using a `postgis`: i) create a role via
`compute_ctl` (with `neon_superuser` grant); ii) create a test role, a
table in schema public, and grant permissions via the role in
`neon_superuser`.
To fix the issue, I added a new `compute_ctl` code that removes such
dangling permissions before dropping the role. It's done in the least
invasive way, i.e., only touches the schema public, because i) that's
the problem we had with PostGIS; ii) it creates a smaller chance of
messing anything up and getting a stuck operation again, just for a
different reason.
Properly, any API-based catalog operations should fail gracefully and
provide an actionable error and status code to the control plane,
allowing the latter to unwind the operation and propagate an error
message and hint to the user. In this sense, it's aligned with another
feature request https://github.com/neondatabase/cloud/issues/21611Resolveneondatabase/cloud#13582
## Problem
Initially we defaulted this to zero to reduce risk. We have now been
using pooling in staging for some time without issues, so let's make it
the default for anyone using this software without setting the config
explicitly.
Closes: https://github.com/neondatabase/cloud/issues/20971
## Summary of changes
- Set Azure blob storage connection pool size to 8 by default
## Problem
Occasionally we see an unexpected error like:
```
ERROR spawn_heartbeat_driver: Failed to update node state 1 after heartbeat round: Shutting down\n')
Hint: use scripts/check_allowed_errors.sh to test any new allowed_error you add
```
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-10324/12690404952/index.html#/testresult/63406a0687bf6eca
## Summary of changes
- Explicitly handle ApiError::ShuttingDown as a no-op when mutating node
status
## Problem
If for some reasons we already garbage-collected the data under an LSN
but the caller uses a past LSN for the find_time_cutoff function, now we
will report a missing key error and GC will never proceed.
Note that missing key error can also happen if the key is really missing
(i.e., during the past offload incidents)
## Summary of changes
Make sure GC proceeds by bumping the LSN. When time_cutoff=None, we will
not increase the time_cutoff (it will be set to latest_gc_cutoff). If we
really need to bump the GC LSN for maintenance purpose, we need a
separate API to do that.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We have several serious data corruption incidents caused by mismatch of
get-age requests:
https://neondb.slack.com/archives/C07FJS4QF7V/p1723032720164359
We hope that the problem is fixed now. But it is better to prevent such
kind of problems in future.
Part of https://github.com/neondatabase/cloud/issues/16472
## Summary of changes
This PR introduce new V3 version of compute<->pageserver protocol,
adding tag to getpage response.
So now compute is able to check if it really gets response to the
requested page.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
The filtered record metric doesn't make sense for interpreted ingest.
## Summary of changes
While of dubious utility in the first place, this patch replaces them
with records received and records observed metrics for interpreted
ingest:
* received records cause the pageserver to do _something_: write a key,
value pair to storage, update some metadata or flush pending
modifications
* observed records are a shard 0 concept and contain only key metadata
used in tracking relation sizes (received records include observed
records)
## Problem
We want to define the algorithm for safekeeper membership change.
## Summary of changes
Add spec for it, several models and logs of checking them.
ref https://github.com/neondatabase/neon/issues/8699
## Problem
This was causing storage controller to still use neon-built libpq
instead of vanilla libpq.
Since https://github.com/neondatabase/neon/pull/10269 we have a vanilla
postgres in the system path -- anything that wants a postgres library
will use that.
## Summary of changes
- Remove LD_LIBRARY_PATH assignment in Dockerfile
This PR removes the direct dependency of the IP allowlist from
CancelClosure, allowing for more scalable and flexible IP restrictions
and enabling the future use of Redis-based CancelMap storage.
Changes:
- Introduce a new BackendAuth async trait that retrieves the IP
allowlist through existing authentication methods;
- Improve cancellation error handling by instrument() async
cancel_sesion() rather than dropping it.
- Set and store IP allowlist for SCRAM Proxy to consistently perform IP
allowance check
Relates to #9660
## Problem
Project gets stuck if database with subscriptions was deleted via API /
UI.
https://github.com/neondatabase/cloud/issues/18646
## Summary of changes
Before dropping the database, drop all the subscriptions in it.
Do not drop slot on publisher, because we have no guarantee that the
slot still exists or that the publisher is reachable.
Add `DropSubscriptionsForDeletedDatabases` phase to run these operations
in all databases, we're about to delete.
Ignore the error if the database does not exist.
## Problem
Typical deployments of neon have some tenants that stay in use
continuously, and a background churning population of tenants that are
created and then fall idle, and are configured to Detached state.
Currently, this churn of short lived tenants results in an
ever-increasing memory footprint.
Closes: https://github.com/neondatabase/neon/issues/9712
## Summary of changes
- At startup, filter to only load shards that don't have Detached policy
- In process_result, check if a tenant's shards are all Detached and
observed=={}, and if so drop them from memory
- In tenant_location_conf and other tenant mutators, load the tenants'
shards on-demand if they are not present
## Problem
The observed state removal may race with the inline updates of the
observed state done from `Service::node_activate_reconcile`.
This was intended to work as follows:
1. Detaches while the node is unavailable remove the entry from the
observed state.
2. `Service::node_activate_reconcile` diffs the locations returned
by the pageserver with the observed state and detaches in-line
when required.
## Summary of changes
This PR removes step (1) and lets background reconciliations
deal with the mismatch between the intent and observed state.
A follow up will attempt to remove `Service::node_activate_reconcile`
altogether.
Closes https://github.com/neondatabase/neon/issues/10253
## Problem
Consider the pageserver is doing the following sequence of operations:
* upload X files
* update index_part to add X and remove Y
* delete Y files
When storage scrubber obtains the initial timeline snapshot before
"update index_part" (that is the old version that contains Y but not X),
and then obtains the index_part file after it gets updated, it will
report all Y files are missing.
## Summary of changes
Do not report layer file missing if index_part listed and downloaded are
not the same (i.e. different last_modified times)
Signed-off-by: Alex Chi Z <chi@neon.tech>
Closes: https://github.com/neondatabase/cloud/issues/17784
## Problem
Currently, we run the whole CI pipeline for any changes. It's slow and
expensive.
## Suggestion
Starting with MacOs builds:
- check what files were changed
- rebuild only needed parts
- reuse results from previous builds when available
- run builds in parallel when possible
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We currently parse Notification twice even in the happy path.
## Summary of changes
Use `#[serde(other)]` to catch unknown topics and defer the second
parsing.
## Problem
`promote-images` was split into `promote-images-dev` and
`promote-images-prod` in
https://github.com/neondatabase/neon/pull/10267.
`dev` credentials were loaded in `promote-images-dev` and `prod`
credentials were loaded in `promote-images-prod`, but
`promote-images-prod` needs `dev` credentials as well to access the
`dev` images to replicate them from `dev` to `prod`.
## Summary of changes
Load `dev` credentials in `promote-images-prod` as well.
Apparently, we failed to do this bookkeeping in quite a few places...
## Problem
Fixes https://github.com/neondatabase/cloud/issues/22364
## Summary of changes
Add accounting of dropped requests. Note that this includes prefetches
dropped due to things like "PS connection dropped unexpectedly" or
"prefetch queue is already full", but *not* (yet?) "dropped due to
backend shutdown".
## Problem
`trigger-e2e-tests` waits half an hour before starting to run. Nearly
half of that time can be saved by promoting images before tests on them
are complete, so the e2e tests can run in parallel.
On `main` and `release{,-proxy,-compute}`, `promote-images` updates
`latest` and pushes things to prod ecr, so we want to run
`promote-images` only after `test-images` is done, but on other
branches, there is no harm in promoting images that aren't tested yet.
## Summary of changes
To promote images into dev container registries sooner, `promote-images`
is split into `promote-images-dev` and `promote-images-prod`. The former
pushes to dev container registries, the latter to prod ones. The latter
also waits for `test-images`, while the former doesn't. This allows to
run `trigger-e2e-tests` sooner.
Using `min(0, ...)` causes us to fail to wait in most situations, so a
lack of data would be a hot wait loop, which is bad.
## Problem
We noticed high CPU usage in some situations
## Problem
On macOS:
```
error: unused variable: `disable_lfc_resizing`
--> compute_tools/src/bin/compute_ctl.rs:431:9
|
431 | disable_lfc_resizing,
| ^^^^^^^^^^^^^^^^^^^^ help: try ignoring the field: `disable_lfc_resizing: _`
|
= note: `-D unused-variables` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_variables)]`
```
## Summary of changes
- Initialise `disable_lfc_resizing` only on Linux (because it's used on
Linux only in further bloc)
## Problem
It's impossible to run regression tests with Python 3.13 as some
dependencies don't support it (some of them are outdated, and `jsonnet`
doesn't support it at all yet)
## Summary of changes
- Update dependencies for Python 3.13
- Install `jsonnet` only on Python < 3.13 and skip relevant tests on
Python 3.13
Closes#10237
## Problem
close https://github.com/neondatabase/neon/issues/10192
## Summary of changes
* `find_gc_time_cutoff` takes `now` parameter so that all branches
compute the cutoff based on the same start time, avoiding races.
* gc-compaction uses a single `get_gc_compaction_watermark` function to
get the safe LSN to compact.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Frame pointers are typically disabled by default (depending on CPU
architecture), to improve performance. This frees up a CPU register, and
avoids a couple of instructions per function call. However, it makes
stack unwinding much more inefficient, since it has to use DWARF debug
information instead, and gives worse results with e.g. `perf` and eBPF
profiles. The `backtrace` implementation of `libunwind` is also
suspected to cause seg faults.
The performance benefit of frame pointer omission doesn't appear to
matter that much on modern 64-bit CPU architectures (which have plenty
of registers and optimized instruction execution), and benchmarks did
not show measurable overhead.
The Rust standard library and jemalloc already enable frame pointers by
default.
For more information, see
https://www.brendangregg.com/blog/2024-03-17/the-return-of-the-frame-pointers.html.
Resolves#10224.
Touches #10225.
## Summary of changes
Enable frame pointers in all builds, and use frame pointers for pprof-rs
stack sampling.
## Problem
Before the holidays, and just before our code freeze, a change to cplane
was made that started publishing the topics from #10197. This triggered
our alerts and put us in a sticky situation as it was not an error, and
we didn't want to silence the alert for the entire holidays, and we
didn't want to release proxy 2 days in a row if it was not essential.
We fixed it eventually by rewriting the alert based on logs, but this is
not a good solution.
## Summary of changes
Introduces an intermediate parsing step to check the topic name first,
to allow us to ignore parsing errors for any topics we do not know
about.
## Problem
We are chasing down segfaults in the storage controller
https://github.com/neondatabase/cloud/issues/21010
This is for use by the storage controller, which links dynamically with
`libpq`. We currently use the neon-built libpq, but this may be unsafe
for use from multi-threaded programs like the controller, as it uses a
statically linked openssl
Precursor to https://github.com/neondatabase/neon/pull/10258
## Summary of changes
- Include `postgresql-15` in container builds.
The reason for using version 15 is simply because that is what's
available in Debian 12 without adding any extra repositories, and we
don't have any special need for latest version in our libpq usage.
## Problem
It's not legal to modify layers that are referenced by the current layer
index. Assert this in the upload queue, as preparation for upload queue
reordering.
Touches #10096.
## Summary of changes
Add a debug assertion that the upload queue does not modify layers
referenced by the current index.
I could be convinced that this should be a plain assertion, but will be
conservative for now.
## Problem
Since enabling continuous profiling in staging, we've seen frequent seg
faults. This is suspected to be because jemalloc and pprof-rs take a
stack trace at the same time, and the handlers aren't signal safe.
jemalloc does this probabilistically on every allocation, regardless of
whether someone is taking a heap profile, which means that any CPU
profile has a chance to cause a seg fault.
Touches #10225.
## Summary of changes
For now, just disable heap profiles -- CPU profiles are more important,
and we need to be able to take them without risking a crash.
## Problem
Since enabling continuous profiling in staging, we've seen frequent seg
faults. This is suspected to be because jemalloc and pprof-rs take a
stack trace at the same time, and the handlers aren't signal safe.
jemalloc does this probabilistically on every allocation, regardless of
whether someone is taking a heap profile, which means that any CPU
profile has a chance to cause a seg fault.
Touches #10225.
## Summary of changes
For now, just disable heap profiles -- CPU profiles are more important,
and we need to be able to take them without risking a crash.
There is a race condition between `Tenant::shutdown`'s `defuse_for_drop`
loop and `offload_timeline`, where timeline offloading can insert into a
tenant that is in the process of shutting down, in fact so far
progressed that the `defuse_for_drop` has already been called.
This prevents warn log lines of the form:
```
offloaded timeline <hash> was dropped without having cleaned it up at the ancestor
```
The solution piggybacks on the `offloaded_timelines` lock: both the
defuse loop and the offloaded timeline insertion need to acquire the
lock, and we know that the defuse loop only runs after the tenant has
set its `TenantState` to `Stopping`.
So if we hold the `offloaded_timelines` lock, and know that the
`TenantState` is not `Stopping`, then we know that the defuse loop has
not ran yet, and holding the lock ensures that it doesn't start running
while we are inserting the offloaded timeline.
Fixes#10070
## Problem
When we do a timeline CRUD operation, we check that the shards we need
to mutate are currently attached to a pageserver, by reading
`generation` and `generation_pageserver` from the database.
If any don't appear to be attached, we respond with a a 503 and "One or
more shards in tenant is not yet attached".
This is happening more often than expected, and it's not obvious with
current logging what's going on: specifically which shard has a problem,
and exactly what we're seeing in these persistent generation columns.
(Aside: it's possible that we broke something with the change in #10011
which clears generation_pageserver when we detach a shard, although if
so the mechanism isn't trivial: what should happen is that if we stamp
on generation_pageserver if a reconciler is running, then it shouldn't
matter because we're about to
## Summary of changes
- When we are in Attached mode but find that
generation_pageserver/generation are unset, output details while looping
over shards.
## Problem
We see periodic failures in `test_scrubber_physical_gc_ancestors`, where
the logs show that the pageserver is creating image layers that should
cause child shards to no longer reference their parents' layers, but
then the scrubber runs and doesn't find any unreferenced layers.[
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-10256/12582034135/index.html#/testresult/78ea06dea6ba8dd3
From inspecting the code & test, it seems like this could be as simple
as the test failing to wait for uploads before running the scrubber. It
had a 2 second delay built in to satisfy the scrubbers time threshold
checks, which on a lightly loaded machine would also have been easily
enough for uploads to complete, but our test machines are more heavily
loaded all the time.
## Summary of changes
- Wait for uploads to complete after generating images layers in
test_scrubber_physical_gc_ancestors, so that the scrubber should
reliably see the post-compaction metadata.
## Problem
Versions of `diesel` and `pq-sys` were somewhat stale. I was checking on
libpq->openssl versions while investigating a segfault via
https://github.com/neondatabase/cloud/issues/21010. I don't think these
rust bindings are likely to be the source of issues, but we might as
well freshen them as a precaution.
## Summary of changes
- Update diesel to 2.2.6
- Update pq-sys to 0.6.3
There was no value in saving them off to temporary variables.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Signed-off-by: Tristan Partin <tristan@neon.tech>
ref neondatabase/cloud#21731
## Problem
When we manually override the LFC size for particular computes,
autoscaling will typically undo that because vm-monitor will resize LFC
itself.
So, we'd like a way to make vm-monitor not set LFC size — this actually
already exists, if we just don't give vm-monitor a postgres connection
string.
## Summary of changes
Add a new field to the compute spec, `disable_lfc_resizing`. When set to
`true`, we pass in `None` for its postgres connection string. That
matches the configuration tested in `neondatabase/autoscaling` CI.
## Problem
Building local_proxy and compute_tools features the same dependency
tree, but as they are currently built in separate clean layers all that
progress is wasted. For our arm builds that's an extra 10 minutes.
## Summary of changes
Combines the compute_tools and local_proxy build layers.
## Problem
https://neondb.slack.com/archives/C085MBDUSS2/p1734604792755369
## Summary of changes
Recognize and ignore the 3 new broadcast messages:
- `/block_public_or_vpc_access_updated`
- `/allowed_vpc_endpoints_updated_for_org`
- `/allowed_vpc_endpoints_updated_for_projects`
## Problem
Running clippy with `cargo hack --feature-powerset` in CI isn't
particularly fast. This PR follows-up on
https://github.com/neondatabase/neon/pull/8912 to improve the speed of
our clippy runs.
Parallelism as suggested in
https://github.com/neondatabase/neon/issues/9901 was tested, but didn't
show consistent enough improvements to be worth it. It actually
increased the amount of work done, as there's less cache hits when
clippy runs are spread out over multiple target directories.
Additionally, parallelism makes it so caching needs to be thought about
more actively and copying around target directories to enable
parallelism eats the rest of the performance gains from parallel
execution.
After some discussion, the decision was to instead cut down on the
number of jobs that are running further. The easiest way to do this is
to not run clippy *without* default features. The list of default
features is empty for all crates, and I haven't found anything using
`cfg(feature = "default")` either, so this is likely not going to change
anything except speeding the runs up.
## Summary of changes
Reduce the amount of feature combinations tried by `cargo hack` (as
suggested in
https://github.com/neondatabase/neon/pull/8912#pullrequestreview-2286482368)
by never disabling default features.
## Alternatives
- We can split things out into different jobs which reduces the time
until everything is finished by running more things in parallel. This
does however decreases the amount of cache hits and increases the amount
of time spent on overhead tasks like repo cloning and restoring caches
by doing those multiple times instead of once.
- We could replace `cargo hack [...] clippy` with `cargo clippy [...];
cargo clippy --features testing`. I'm not 100% sure how this compares to
the change here in the PR, but it does seem to run a bit faster. That
likely means it's doing less work, but without understanding what
exactly we loose by that I'd rather not do that for now. I'd appreciate
input on this though.
Now that we construct the TLS client config for cancellation as well as
connect, it feels appropriate to construct the same config once and
re-use it elsewhere. It might also help should #7500 require any extra
setup, so we can easily add it to all the appropriate call sites.
In #10207 it was clear there was some confusion with the current
connection logic. To analyse the flow to make sure there was no poll
stalling, I ended up with the following refactor.
Notable changes:
1. Now all functions called `poll_xyz` and that have a `cx: &mut
Context` argument must return a `Poll<_>` type, and can only return
`Pending` iff an internal poll call also returned `Pending`
2. State management is handled entirely by `poll_messages`. There are
now only 2 states which makes it much easier to keep track of.
Each commit should be self-reviewable and should be simple to verify
that it keeps the same behaviour
## Problem
Currently default value of storage controller heartbeat interval is
100msec. It means that 10 times per second it establish connection to
PS. And it seems to be quite expensive.
At MacOS right now storage_controller consumes 70% CPU and trusts - 30%.
So together they completely utilize one core.
A lot of us has Macs. Let's save environment a little bit and do not
waste electricity and contribute to global warming.
By the way, on prod we have interval 10seconds
## Summary of changes
Increase heartbeat interval from 100msec to 1 second.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
In https://github.com/neondatabase/neon/pull/9897 we temporarily
disabled the layer valid check because the current one only considers
the end result of all compaction algorithms, but partial gc-compaction
would temporarily produce an "invalid" layer map.
part of https://github.com/neondatabase/neon/issues/9114
## Summary of changes
Allow LSN splits to overlap in the slow path check. Currently, the valid
check is only used in storage scrubber (background job) and during
gc-compaction (without taking layer lock). Therefore, it's fine for such
checks to be a little bit inefficient but more accurate.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Safekeeper may currently send a batch to the pageserver even if it
hasn't decoded a new record.
I think this is quite unlikely in the field, but worth adressing.
## Summary of changes
Don't send anything if we haven't decoded a full record. Once this
merges and releases, the `InterpretedWalRecords` struct can be updated
to remove the Option wrapper for `next_record_lsn`.
## Problem
The benchmarking utilities are also useful for testing. We want to write
tests in the safekeeper crate.
## Summary of changes
This commit lifts the utils to the safekeeper crate. They are compiled
if the benchmarking features is enabled or if in test mode.
## Problem
test_timeline_archival_chaos does timeline creation with failure
injection, and thereby sometimes leaves timelines in a part created
state. This was being reported as corruption by the scrubber on test
teardown, because it considered a layer without an index to be an
invalid state. This was incorrect: the scrubber should accept this
state, it occurs legitimately during timeline creation.
Closes: https://github.com/neondatabase/neon/issues/9988
## Summary of changes
- Report a timeline with layers but no index as Relic rather than
MissingIndexPart.
- We retain the MissingIndexPart variant for the case where an index
_was_ found in the listing, but was not found by a subsequent GET, i.e.
racing with deletion.
## Problem
`test_pgdata_import_smoke` writes two gigabytes of pages and then reads
them back serially. This is CPU bottlenecked and results in a long
runtime, and sensitivity to CPU load from other tests on the same
machine.
Closes: https://github.com/neondatabase/neon/issues/10071
## Summary of changes
- Use effective_io_concurrency=32 when doing sequential scans through
2GiB of pages in test_pgdata_import_smoke. This is a ~10x runtime
decrease in the parts of the test that do sequential scans.
- Also set `effective_io_concurrency=2` for tests, as I noticed while
debugging that we were doing all getpage requests serially, which is bad
for checking the stability of the batching code.
## Problem
We want to verify how much / if pgbench throughput and latency on Neon
suffers if the database contains many other relations, too.
## Summary of changes
Modify the benchmarking.yml pgbench-compare job to
- create an addiitional project at scale factor 10 GiB
- before running pgbench add n tables (initially 10k) to the database
- then compare the pgbench throughput and latency to the existing
pgbench-compare at 10 Gib scale factor
We use a realistic template for the n relations that is a partitioned
table with some realistic data types, indexes and constraints - similar
to a table that we use internally.
Example run:
https://github.com/neondatabase/neon/actions/runs/12377565956/job/34547386959
## Problem
s5cmd doesn't pick up the pod service account
```
2024/12/16 16:26:01 Ignoring, HTTP credential provider invalid endpoint host, "169.254.170.23", only loopback hosts are allowed. <nil>
ERROR "ls s3://neon-dev-bulk-import-us-east-2/import-pgdata/fast-import/v1/br-wandering-hall-w2xobawv": NoCredentialProviders: no valid providers in chain. Deprecated. For verbose messaging see aws.Config.CredentialsChainVerboseErrors
```
## Summary of changes
Switch to offical CLI.
## Testing
Tested the pre-merge image in staging, using `job_image` override in
project settings.
https://neondb.slack.com/archives/C033RQ5SPDH/p1734554944391949?thread_ts=1734368383.258759&cid=C033RQ5SPDH
## Future Work
Switch back to s5cmd once https://github.com/peak/s5cmd/pull/769 gets
merged.
## Refs
- fixes https://github.com/neondatabase/cloud/issues/21876
---------
Co-authored-by: Gleb Novikov <NanoBjorn@users.noreply.github.com>
## Problem
In https://github.com/neondatabase/neon/pull/8103 we changed the test
case to have more test coverage of gc_compaction. Now that we have
`test_gc_compaction_smoke`, we can revert this test case to serve its
original purpose and revert the parameter changes.
part of https://github.com/neondatabase/neon/issues/9114
## Summary of changes
* Revert pitr_interval from 60s to 10s.
* Assert the physical/logical size ratio in the benchmark.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
We cannot get the size of the compaction queue and access the info.
Part of #9114
## Summary of changes
* Add an API endpoint to get the compaction queue.
* gc_compaction test case now waits until the compaction finishes.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`neon_local` has always been unsafe to run concurrently with itself: it
uses simple text files for persistent state, and concurrent runs will
step on each other.
In some test environments we intentionally handle this with mutexes in
python land, but it's fragile to try and always remember to do that.
## Summary of changes
- Add a `flock` based mutex around the `main` function of neon_local,
using the repo directory as the file to lock
- Clean up an Option<> around control_plane_api, this is a drive-by
change because it was one of the fields that had a weird effect when
previous concurrent stuff stamped on it.
## Problem
part of https://github.com/neondatabase/neon/issues/9114
In https://github.com/neondatabase/neon/pull/10127 we fixed the race,
but we didn't add the errors to the allowlist.
## Summary of changes
* Allow repartition errors in the gc-compaction smoke test.
I think it might be worth to refactor the code to allow multiple threads
getting a copy of repartition status (i.e., using Rcu) in the future.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Add a `safekeepers` subcommand to `storcon_cli` that allows listing the
safekeepers.
```
$ curl -X POST --url http://localhost:1234/control/v1/safekeeper/42 --data \
'{"active":true, "id":42, "created_at":"2023-10-25T09:11:25Z", "updated_at":"2024-08-28T11:32:43Z","region_id":"neon_local","host":"localhost","port":5454,"http_port":0,"version":123,"availability_zone_id":"us-east-2b"}'
$ cargo run --bin storcon_cli -- --api http://localhost:1234 safekeepers
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.38s
Running `target/debug/storcon_cli --api 'http://localhost:1234' safekeepers`
+----+---------+-----------+------+-----------+------------+
| Id | Version | Host | Port | Http Port | AZ Id |
+==========================================================+
| 42 | 123 | localhost | 5454 | 0 | us-east-2b |
+----+---------+-----------+------+-----------+------------+
```
Also:
* Don't return the raw `SafekeeperPersistence` struct that contains the
raw database presentation, but instead a new
`SafekeeperDescribeResponse` struct.
* The `SafekeeperPersistence` struct leaves out the `active` field on
purpose because we want to deprecate it and replace it with a
`scheduling_policy` one.
Part of https://github.com/neondatabase/neon/issues/9981
## Problem
The allure report finishes with the error `HttpError: Resource not
accessible by integration` while running the `pg_regress` test against a
cloud staging project due to a lack of permissions.
## Summary of changes
The permissions are added.
## Problem
It is unreliable for the control plane to infer the AZ for computes from
where the tenant is currently attached, because if a tenant happens to
be in a degraded state or a release is ongoing while a compute starts,
then the tenant's attached AZ can be a different one to where it will
run long-term, and the control plane doesn't check back later to restart
the compute.
This can land in parallel with
https://github.com/neondatabase/neon/pull/9947
## Summary of changes
- Thread through the preferred AZ into the compute hook code via the
reconciler
- Include the preferred AZ in the body of compute hook notifications
## Problem
Jemalloc heap profiles aren't symbolized. This is inconvenient, and
doesn't work with Grafana Cloud Profiles.
Resolves#9964.
## Summary of changes
Symbolize the heap profiles in-process, and strip unnecessary cruft.
This uses about 100 MB additional memory to cache the DWARF information,
but I believe this is already the case with CPU profiles, which use the
same library for symbolization. With cached DWARF information, the
symbolization CPU overhead is negligible.
Example profiles:
*
[pageserver.pb.gz](https://github.com/user-attachments/files/18141395/pageserver.pb.gz)
*
[safekeeper.pb.gz](https://github.com/user-attachments/files/18141396/safekeeper.pb.gz)
Don't build tests in h3 and rdkit: ~15 min speedup.
Use Ninja as cmake generator where possible: ~10 min speedup.
Clean apt cache for smaller images: around 250mb size loss for
intermediate layers
## Problem
It was reported as `gauge`, but it's actually a `counter`.
Also add `_total` suffix as that's the convention for counters.
The corresponding flux-fleet PR:
https://github.com/neondatabase/flux-fleet/pull/386
## Problem
The ABS SDK's default behavior is to do no connection pooling, i.e. open
and close a fresh connection for each request. Under high request rates,
this can result in an accumulation of TCP connections in TIME_WAIT or
CLOSE_WAIT state, and in extreme cases exhaustion of client ports.
Related: https://github.com/neondatabase/cloud/issues/20971
## Summary of changes
- Add a configurable `conn_pool_size` parameter for Azure storage,
defaulting to zero (current behavior)
- Construct a custom reqwest client using this connection pool size.
## Problem
It's impossible to run docker compose with compute v17 due to `pg_anon`
extension which is not supported under PG17.
## Summary of changes
The auto-loading of `pg_anon` is disabled by default
## Problem
To debug issues with TLS connections there's no easy way to decrypt
packets unless a client has special support for logging the keys.
## Summary of changes
Add TLS session keys logging to proxy via `SSLKEYLOGFILE` env var gated
by flag.
As the title says, I updated the lint rules to no longer allow unwrap or
unimplemented.
Three special cases:
* Tests are allowed to use them
* std::sync::Mutex lock().unwrap() is common because it's usually
correct to continue panicking on poison
* `tokio::spawn_blocking(...).await.unwrap()` is common because it will
only error if the blocking fn panics, so continuing the panic is also
correct
I've introduced two extension traits to help with these last two, that
are a bit more explicit so they don't need an expect message every time.
## Problem
We've had similar test in test_logical_replication, but then removed it
because it wasn't needed to trigger LR related bug. Restarting at WAL
page boundary is still a useful test, so add it separately back.
## Summary of changes
Add the test.
## Problem
We want to use safekeeper http client in storage controller and
neon_local.
## Summary of changes
Extract it to separate crate. No functional changes.
## Problem
While reviewing #10152 I found it tricky to actually determine whether
the connection used `allow_self_signed_compute` or not.
I've tried to remove this setting in the past:
* https://github.com/neondatabase/neon/pull/7884
* https://github.com/neondatabase/neon/pull/7437
* https://github.com/neondatabase/cloud/pull/13702
But each time it seems it is used by e2e tests
## Summary of changes
The `node_info.allow_self_signed_computes` is always initialised to
false, and then sometimes inherits the proxy config value. There's no
need this needs to be in the node_info, so removing it and propagating
it via `TcpMechansim` is simpler.
## Problem
Changes in #9786 were functionally complete but missed some edges that
made testing less robust than it should have been:
- `is_key_disposable` didn't consider SLRU dir keys disposable
- Timeline `init_empty` was always creating SLRU dir keys on all shards
The result was that when we had a bug
(https://github.com/neondatabase/neon/pull/10080), it wasn't apparent in
tests, because one would only encounter the issue if running on a
long-lived timeline with enough compaction to drop the initially created
empty SLRU dir keys, _and_ some CLog truncation going on.
Closes: https://github.com/neondatabase/cloud/issues/21516
## Summary of changes
- Update is_key_global and init_empty to handle SLRU dir keys properly
-- the only functional impact is that we avoid writing some spurious
keys in shards >0, but this makes testing much more robust.
- Make `test_clog_truncate` explicitly use a sharded tenant
The net result is that if one reverts #10080, then tests fail (i.e. this
PR is a reproducer for the issue)
## Problem
In #8550, we made the flush loop wait for uploads after every layer.
This was to avoid unbounded buildup of uploads, and to reduce compaction
debt. However, the approach has several problems:
* It prevents upload parallelism.
* It prevents flush and upload pipelining.
* It slows down ingestion even when there is no need to backpressure.
* It does not directly backpressure WAL ingestion (only via
`disk_consistent_lsn`), and will build up in-memory layers.
* It does not directly backpressure based on compaction debt and read
amplification.
An alternative solution to these problems is proposed in #8390.
In the meanwhile, we revert the change to reduce the impact on ingest
throughput. This does reintroduce some risk of unbounded
upload/compaction buildup. Until
https://github.com/neondatabase/neon/issues/8390, this can be addressed
in other ways:
* Use `max_replication_apply_lag` (aka `remote_consistent_lsn`), which
will more directly limit upload debt.
* Shard the tenant, which will spread the flush/upload work across more
Pageservers and move the bottleneck to Safekeeper.
Touches #10095.
## Summary of changes
Remove waiting on the upload queue in the flush loop.
## Problem
When entry was dropped and password wasn't set, new entry
had uninitialized memory in controlplane adapter
Resolves: https://github.com/neondatabase/cloud/issues/14914
## Summary of changes
Initialize password in all cases, add tests.
Minor formatting for less indentation
## Problem
`benchmarking` job fails because `aws-oicd-role-arn` input is not set
## Summary of changes:
- Set `aws-oicd-role-arn` for `benchmarking job
- Always require `aws-oicd-role-arn` to be set
- Rename `aws_oicd_role_arn` to `aws-oicd-role-arn` for consistency
## Problem
close https://github.com/neondatabase/neon/issues/10124
gc-compaction split_gc_jobs is holding the repartition lock for too long
time.
## Summary of changes
* Ensure split_gc_compaction_jobs drops the repartition lock once it
finishes cloning the structures.
* Update comments.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Improved comments will help others when they read the code, and the log
messages will help others understand why the logical replication monitor
works the way it does.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
LFC used_pages statistic is not updated in case of LFC resize (shrinking
`neon.file_cache_size_limit`)
## Summary of changes
Update `lfc_ctl->used_pages` in `lfc_change_limit_hook`
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The test was failing with the scary but generic message `Remote storage
metadata corrupted`.
The underlying scrubber error is `Orphan layer detected: ...`.
The test kills pageserver at random points, hence it's expected that we
leak layers if we're killed in the window after layer upload but before
it's referenced from index part.
Refer to generation numbers RFC for details.
Refs:
- fixes https://github.com/neondatabase/neon/issues/9988
- root-cause analysis
https://github.com/neondatabase/neon/issues/9988#issuecomment-2520673167
## Problem
`test_prefetch` is flaky
(https://github.com/neondatabase/neon/issues/9961), but if it passes,
the run time is less than 30 seconds — we don't need an extended timeout
for it.
## Summary of changes
- Remove extended test timeout for `test_prefetch`
## Problem
We want to extract safekeeper http client to separate crate for use in
storage controller and neon_local. However, many types used in the API
are internal to safekeeper.
## Summary of changes
Move them to safekeeper_api crate. No functional changes.
ref https://github.com/neondatabase/neon/issues/9011
## Problem
When moving the comment on proxy-releases from the yaml doc into a
javascript code block, I missed converting the comment marker from `#`
to `//`.
## Summary of changes
Correctly convert comment marker.
## Problem
I've noticed that debug builds with LFC fail more frequently and for
some reason ,their failure do block merging (but it should not)
## Summary of changes
- Do not run Debug builds with LFC
## Problem
When we update our scheduler/optimization code to respect AZs properly
(https://github.com/neondatabase/neon/pull/9916), the choice of AZ
becomes a much higher-stakes decision. We will pretty much always run a
tenant in its preferred AZ, and that AZ is fixed for the lifetime of the
tenant (unless a human intervenes)
Eventually, when we do auto-balancing based on utilization, I anticipate
that part of that will be to automatically change the AZ of tenants if
our original scheduling decisions have caused imbalance, but as an
interim measure, we can at least avoid making this scheduling decision
based purely on which AZ contains the emptiest node.
This is a precursor to https://github.com/neondatabase/neon/pull/9947
## Summary of changes
- When creating a tenant, instead of scheduling a shard and then reading
its preferred AZ back, make the AZ decision first.
- Instead of choosing AZ based on which node is emptiest, use the median
utilization of nodes in each AZ to pick the AZ to use. This avoids bad
AZ decisions during periods when some node has very low utilization
(such as after replacing a dead node)
I considered also making the selection a weighted pseudo-random choice
based on utilization, but wanted to avoid destabilising tests with that
for now.
## Problem
Now notifications about failures in `pg_regress` tests run on the
staging cloud instance, reach the channel `on-call-staging-stream`,
while they should reach `on-call-qa-staging-stream`
## Summary of changes
The channel changed.
## Problem
CI currently uses static credentials in some places. These are less
secure and hard to maintain, so we are going to deprecate them and use
OIDC auth.
## Summary of changes
- ci(fix): Use OIDC auth to upload artifact on s3
- ci(fix): Use OIDC auth to login on ECR
## Problem
Now that https://github.com/neondatabase/cloud/issues/15245 is done, we
can remove the old code.
## Summary of changes
Removes support for the ManagementV2 API, in favour of the ProxyV1 API.
## Problem
To give Storage more time on preprod — create a release branch on Friday
## Summary of changes
- Automatically create Storage release PR on Friday instead of Monday
This adds an API to the storage controller to list safekeepers
registered to it.
This PR does a `diesel print-schema > storage_controller/src/schema.rs`
because of an inconsistency between up.sql and schema.rs, introduced by
[this](2c142f14f7)
commit, so there is some updates of `schema.rs` due to that. As a
followup to this, we should maybe think about running `diesel
print-schema` in CI.
Part of #9981
## Problem
`test_check_visibility_map` has been seen to time out in debug tests.
## Summary of changes
Bump the timeout to 10 minutes (test reports indicate 7 minutes is
sufficient).
We don't want to disable the test entirely in debug builds, to exercise
this with debug assertions enabled.
Resolves#10069.
This adds some validation of invariants that we want to uphold wrt the
tenant manifest and `index_part.json`:
* the data the manifest has about a timeline must match with the data in
`index_part.json`. It might actually change, e.g. when we do reparenting
during detach ancestor, but that requires the timeline to be
unoffloaded, i.e. removed from the manifest.
* any timeline mentioned in index part, must, if present, be archived.
If we unarchive, we first update the tenant manifest to unoffload, and
only then update index part. And one needs to archive before offloading.
* it is legal for timelines to be mentioned in the manifest but have no
`index_part`: this is a temporary state visible during deletion of the
timeline. if the pageserver crashed, an attach of the tenant will clean
the state up.
* it is also legal for offloaded timelines to have an
`ancestor_retain_lsn` of None while having an `ancestor_timeline_id`.
This is for the to-be-added flattening functionality: the plan is to set
former to None if we have flattened a timeline.
follow-up of #9942
part of #8088
## Problem
We saw the drain/fill operations not drain fast enough in ap-southeast.
## Summary of changes
These are some quick changes to speed it up:
* double reconcile concurrency - this is now half of the available
reconcile bandwidth
* reduce the waiter polling timeout - this way we can spawn new
reconciliations faster
## Problem
Cplane and storage controller tenant config changes are not additive.
Any change overrides all existing tenant configs. This would be fine if
both did client side patching, but that's not the case.
Once this merges, we must update cplane to use the PATCH endpoint.
## Summary of changes
### High Level
Allow for patching of tenant configuration with a `PATCH
/v1/tenant/config` endpoint.
It takes the same data as it's PUT counterpart. For example the payload
below will update `gc_period` and unset `compaction_period`. All other
fields are left in their original state.
```
{
"tenant_id": "1234",
"gc_period": "10s",
"compaction_period": null
}
```
### Low Level
* PS and storcon gain `PATCH /v1/tenant/config` endpoints. PS endpoint
is only used for cplane managed instances.
* `storcon_cli` is updated to have separate commands for
`set-tenant-config` and `patch-tenant-config`
Related https://github.com/neondatabase/cloud/issues/21043
add owned_by_superuser field to filter out system extensions.
While on it, also correct related code:
- fix the metric setting: use set() instead of inc() in a loop.
inc() is not idempotent and can lead to incorrect results
if the function called multiple times. Currently it is only called at
compute start, but this will change soon.
- fix the return type of the installed_extensions endpoint
to match the metric. Currently it is only used in the test.
## Problem
Linking walproposer library (e.g. `cargo t`) produces linker errors:
/home/myrrc/neon/pgxn/neon/walproposer_compat.c:169: undefined reference
to `pg_snprintf'
The library with these symbols (libpgcommon.a) is present
## Summary of changes
Changed order of libraries resolution for linker
## Problem
We added support for LFC for tests but are still using it only for the
PG17 release.
## Summary of changes
LFC is enabled for all PG versions. Errors in tests with LFC enabled now
block merging as usual. We keep tests with disabled LFC for PG17
release. Tests on debug builds with LFC enabled still don't affect
permission to merge.
## Problem
If the control plane cannot be reached for some reason, compute_ctl
panics
## Summary of changes
panic is removed in favour of returning an error.
Code is reformatted a bit for more flat control flow
Resolves: #5391
## Problem
We get slru truncation commands on non-zero shards.
Compaction will drop the slru dir keys and ingest will fail when
receiving such records.
https://github.com/neondatabase/neon/pull/10080 fixed it for clog, but
not for multixact.
## Summary of changes
Only truncate multixact slrus on shard zero. I audited the rest of the
ingest code and it looks
fine from this pov.
## Problem
With pipelining enabled, the time a request spends in the batcher stage
counts towards the smgr op latency.
If pipelining is disabled, that time is not accounted for.
In practice, this results in a jump in smgr getpage latencies in various
dashboards and degrades the internal SLO.
## Solution
In a similar vein to #10042 and with a similar rationale, this PR stops
counting the time spent in batcher stage towards smgr op latency.
The smgr op latency metric is reduced to the actual execution time.
Time spent in batcher stage is tracked in a separate histogram.
I expect to remove that histogram after batching rollout is complete,
but it will be helpful in the meantime to reason about the rollout.
## Problem
Protobuf doesn't support 128 bit integers, so we encode the keys as two
64 bit integers. Issue is that when we split the 128 bit compact key we
use signed 64 bit integers to represent the two halves. This may result
in a negative lower half when relnode is larger than `0x00800000`. When
we convert the lower half to an i128 we get a negative `CompactKey`.
## Summary of Changes
Use unsigned integers when encoding into Protobuf.
## Deployment
* Prod: We disabled the interpreted proto, so no compat concerns.
* Staging: Disable the interpreted proto, do one release, and then
release the fixed version.
We do this because a negative int32 will convert to a large uint32 value
and could give
a key in the actual pageserver space. In production we would around this
by adding new
fields to the proto and deprecating the old ones, but we can make our
lives easy here.
* Pre-prod: Same as staging
## Problem
With pipelining enabled, the time a request spends in the batcher stage
counts towards the smgr op latency.
If pipelining is disabled, that time is not accounted for.
In practice, this results in a jump in smgr getpage latencies in various
dashboards and degrades the internal SLO.
## Solution
In a similar vein to #10042 and with a similar rationale, this PR stops
counting the time spent in batcher stage towards smgr op latency.
The smgr op latency metric is reduced to the actual execution time.
Time spent in batcher stage is tracked in a separate histogram.
I expect to remove that histogram after batching rollout is complete,
but it will be helpful in the meantime to reason about the rollout.
## Problem
Protobuf doesn't support 128 bit integers, so we encode the keys as two
64 bit integers. Issue is that when we split the 128 bit compact key we
use signed 64 bit integers to represent the two halves. This may result
in a negative lower half when relnode is larger than `0x00800000`. When
we convert the lower half to an i128 we get a negative `CompactKey`.
## Summary of Changes
Use unsigned integers when encoding into Protobuf.
## Deployment
* Prod: We disabled the interpreted proto, so no compat concerns.
* Staging: Disable the interpreted proto, do one release, and then
release the fixed version.
We do this because a negative int32 will convert to a large uint32 value
and could give
a key in the actual pageserver space. In production we would around this
by adding new
fields to the proto and deprecating the old ones, but we can make our
lives easy here.
* Pre-prod: Same as staging
## Problem
When dev deployments are disabled (or fail), the tags for releases
aren't created. It makes more sense to have tag and release creation
before the deployment to prevent situations like
[this](https://github.com/neondatabase/neon/pull/9959).
It is not enough to move the tag creation before the deployment. If the
deployment fails, re-running the job isn't possible because the API call
to create the tag will fail.
## Summary of changes
- Tag/Release creation now happens before the deployment
- The two steps for tag and release have been merged into a bigger one
- There's new checks to ensure the that if the tags/releases already
exist as expected, things will continue just fine.
## Problem
In #9786 we stop storing SLRUs on non-zero shards.
However, there was one code path during ingest that still tries to
enumerate SLRU relations on all shards. This fails if it sees a tenant
who has never seen any write to an SLRU, or who has done such thorough
compaction+GC that it has dropped its SLRU directory key.
## Summary of changes
- Avoid trying to list SLRU relations on nonzero shards
Neon doesn't have seqscan detection of its own, so stop read_stream from
trying to utilize that readahead, and instead make it issue readahead of
its own.
## Problem
@knizhnik noticed that we didn't issue smgrprefetch[v] calls for
seqscans in PG17 due to the move to the read_stream API, which assumes
that the underlying IO facilities do seqscan detection for readahead.
That is a wrong assumption when Neon is involved, so let's remove the
code that applies that assumption.
## Summary of changes
Remove the cases where seqscans are detected and prefetch is disabled as
a consequence, and instead don't do that detection.
PG PR: https://github.com/neondatabase/postgres/pull/532
## Problem
resolve
https://github.com/neondatabase/neon/issues/9988#issuecomment-2528239437
## Summary of changes
* New verbose mode for storage scrubber scan metadata (pageserver) that
contains the error messages.
* Filter allowed_error list from the JSON output to determine the
healthy flag status.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
We have metrics for GetPage request latencies, but this is an extra
measure to capture requests that take way too long in the logs. The log
message is printed every 10 s, until the response is received:
```
PG:2024-12-09 16:02:07.715 GMT [1782845] LOG: [NEON_SMGR] [shard 0] no response received from pageserver for 10.000 s, still waiting (sent 10613 requests, received 10612 responses)
PG:2024-12-09 16:02:17.723 GMT [1782845] LOG: [NEON_SMGR] [shard 0] no response received from pageserver for 20.008 s, still waiting (sent 10613 requests, received 10612 responses)
PG:2024-12-09 16:02:19.719 GMT [1782845] LOG: [NEON_SMGR] [shard 0] received response from pageserver after 22.006 s
```
## Problem
close https://github.com/neondatabase/cloud/issues/19671
```
Timeline -----------------------------
^ last GC happened LSN
^ original retention period setting = 24hr
> refresh-gc-info updates the gc_info
^ planned cutoff (gc_info)
^ customer set retention to 48hr, and it's still within the last GC LSN
^1 ^2 we have two choices: (1) update the planned cutoff to
move backwards, or (2) keep the current one
```
In this patch, we decided to keep the current cutoff instead of moving
back the gc_info to avoid races. In the future, we could allow the
planned gc cutoff to go back once cplane sends a retention_history
tenant config update, but this requires a careful revisit of the code.
## Summary of changes
Ensure that GC cutoffs never go back if retention settings get changed.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
See https://github.com/neondatabase/neon/issues/9961
Current implementation of prefetch buffer resize doesn't correctly
handle in-flight requests
## Summary of changes
1. Fix index of entry we should wait for if new prefetch buffer size is
smaller than number of in-flight requests.
2. Correctly set flush position
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Azure has a different per-request limit of 256 items for bulk deletion
compared to the number of 1000 on AWS. Therefore, we need to support
multiple values. Due to `GenericRemoteStorage`, we can't add an
associated constant, but it has to be a function.
The PR replaces the `MAX_KEYS_PER_DELETE` constant with a function of
the same name, implemented on both the `RemoteStorage` trait as well as
on `GenericRemoteStorage`.
The value serves as hint of how many objects to pass to the
`delete_objects` function.
Reading:
* https://learn.microsoft.com/en-us/rest/api/storageservices/blob-batch
* https://docs.aws.amazon.com/AmazonS3/latest/API/API_DeleteObjects.html
Part of #7931
Hello! I was interested in potentially making some contributions to Neon
and looking through the issue backlog I found
[8200](https://github.com/neondatabase/neon/issues/8200) which seemed
like a good first issue to attempt to tackle. I see it was assigned a
while ago so apologies if I'm stepping on any toes with this PR. I also
apologize for the size of this PR. I'm not sure if there is a simple way
to reduce it given the footprint of the components being changed.
## Problem
This PR is attempting to address part of the problem outlined in issue
[8200](https://github.com/neondatabase/neon/issues/8200). Namely to
remove global static usage of timeline state in favour of
`Arc<GlobalTimelines>` and to replace wasteful clones of
`SafeKeeperConf` with `Arc<SafeKeeperConf>`. I did not opt to tackle
`RemoteStorage` in this PR to minimize the amount of changes as this PR
is already quite large. I also did not opt to introduce an
`SafekeeperApp` wrapper struct to similarly minimize changes but I can
tackle either or both of these omissions in this PR if folks would like.
## Summary of changes
- Remove static usage of `GlobalTimelines` in favour of
`Arc<GlobalTimelines>`
- Wrap `SafeKeeperConf` in `Arc` to avoid wasteful clones of the
underlying struct
## Some additional thoughts
- We seem to currently store `SafeKeeperConf` in `GlobalTimelines` and
then expose it through a public`get_global_config` function which
requires locking. This seems needlessly wasteful and based on observed
usage we could remove this public accessor and force consumers to
acquire `SafeKeeperConf` through the new Arc reference.
## Problem
close https://github.com/neondatabase/neon/issues/10049, close
https://github.com/neondatabase/neon/issues/10030, close
https://github.com/neondatabase/neon/issues/8861
part of https://github.com/neondatabase/neon/issues/9114
The legacy gc process calls `get_latest_gc_cutoff`, which uses a Rcu
different than the gc_info struct. In the gc_compaction_smoke test case,
the "latest" cutoff could be lower than the gc_info struct, causing
gc-compaction to collect data that could be accessed by
`latest_gc_cutoff`. Technically speaking, there's nothing wrong with
gc-compaction using gc_info without considering latest_gc_cutoff,
because gc_info is the source of truth. But anyways, let's fix it.
## Summary of changes
* gc-compaction uses `latest_gc_cutoff` instead of gc_info to determine
the gc horizon.
* if a gc-compaction is scheduled via tenant compaction iteration, it
will take the gc_block lock to avoid racing with functionalities like
detach ancestor (if it's triggered via manual compaction API without
scheduling, then it won't take the lock)
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Currently, we run the `pg_regress` tests only for PG16
However, PG17 is a part of Neon and should be tested as well
## Summary of changes
Modified the workflow and added a patch for PG17 enabling the
`pg_regress` tests.
The problem with leftovers was solved by using branches.
For a while already, we've been unable to update the Azure SDK crates
due to Azure adopting use of a non-tokio async runtime, see #7545.
The effort to upstream the fix got stalled, and I think it's better to
switch to a patched version of the SDK that is up to date.
Now we have a fork of the SDK under the neondatabase github org, to
which I have applied Conrad's rebased patches to:
https://github.com/neondatabase/azure-sdk-for-rust/tree/neon .
The existence of a fork will also help with shipping bulk delete support
before it's upstreamed (#7931).
Also, in related news, the Azure SDK has gotten a rift in development,
where the main branch pertains to a future, to-be-officially-blessed
release of the SDK, and the older versions, which we are currently
using, are on the `legacy` branch. Upstream doesn't really want patches
for the `legacy` branch any more, they want to focus on the `main`
efforts. However, even then, the `legacy` branch is still newer than
what we are having right now, so let's switch to `legacy` for now.
Depending on how long it takes, we can switch to the official version of
the SDK once it's released or switch to the upstream `main` branch if
there is changes we want before that.
As a nice side effect of this PR, we now use reqwest 0.12 everywhere,
dropping the dependency on version 0.11.
Fixes#7545
Result of running:
cargo update -p aws-types -p aws-sigv4 -p aws-credential-types -p
aws-smithy-types -p aws-smithy-async -p aws-sdk-kms -p aws-sdk-iam -p
aws-sdk-s3 -p aws-config
We want to keep the AWS SDK up to date as that way we benefit from new
developments and improvements.
## Problem
We saw a tenant get stuck when it had been put into Pause scheduling
mode to pin it to a pageserver, then it was left idle for a while and
the control plane tried to detach it.
Close: https://github.com/neondatabase/neon/issues/9957
## Summary of changes
- When changing policy to Detached or Secondary, set the scheduling
policy to Active.
- Add a test that exercises this
- When persisting tenant shards, set their `generation_pageserver` to
null if the placement policy is not Attached (this enables consistency
checks to work, and avoids leaving state in the DB that could be
confusing/misleading in future)
## Problem
In #9962 I changed the smgr metrics to include time spent on flush.
It isn't under our (=storage team's) control how long that flush takes
because the client can stop reading requests.
## Summary of changes
Stop the timer as soon as we've buffered up the response in the
`pgb_writer`.
Track flush time in a separate metric.
---------
Co-authored-by: Yuchen Liang <70461588+yliang412@users.noreply.github.com>
If the pageserver connection is lost while receiving the prefetch
request, the prefetch queue is cleared. The error message prints the
values from the prefetch slot, but because the slot was already cleared,
they're all zeros:
LOG: [NEON_SMGR] [shard 0] No response from reading prefetch entry 0:
0/0/0.0 block 0. This can be caused by a concurrent disconnect
To fix, make local copies of the values.
In the passing, also add a sanity check that if the receive() call
succeeds, the prefetch slot is still intact.
## Problem
part of https://github.com/neondatabase/neon/issues/9114, stacked PR
over #9809
The compaction scheduler now schedules partial compaction jobs.
## Summary of changes
* Add the compaction job splitter based on size.
* Schedule subcompactions using the compaction scheduler.
* Test subcompaction scheduler in the smoke regress test.
* Temporarily disable layer map checks
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
With the current metrics we can't identify which shards are ingesting
data at any given time.
## Summary of changes
Add a metric for the number of wal records received for processing by
each shard. This is per (tenant, timeline, shard).
## Problem
We didn't have a codeowner for `/compute`, so nobody was auto-assigned
for PRs like #9973
## Summary of changes
While on it:
1. Group codeowners into sections.
2. Remove control plane from the `/compute_tools` because it's primarily
the internal `compute_ctl` code.
3. Add control plane (and compute) to `/libs/compute_api` because that's
the shared public interface of the compute.
We've seen cases where stray keys end up on the wrong shard. This
shouldn't happen. Add debug assertions to prevent this. In release
builds, we should be lenient in order to handle changing key ownership
policies.
Touches #9914.
## Problem
There's no metrics for disk consistent LSN and remote LSN. This stuff is
useful when looking at ingest performance.
## Summary of changes
Two per timeline metrics are added: `pageserver_disk_consistent_lsn` and
`pageserver_projected_remote_consistent_lsn`. I went for the projected
remote lsn instead of the visible one
because that more closely matches remote storage write tput. Ideally we
would have both, but these metrics are expensive.
## Problem
I'm writing an ingest benchmark in #9812. To time S3 uploads, I need to
schedule a flush of the Pageserver's in-memory layer, but don't actually
want to wait around for it to complete (which will take a minute).
## Summary of changes
Add a parameter `wait_until_flush` (default `true`) for
`timeline/checkpoint` to control whether to wait for the flush to
complete.
## Problem
FSM pages are managed like regular relation pages, and owned by a single
shard. However, when truncating the FSM relation the last FSM page was
zeroed out on all shards. This is unnecessary and potentially confusing.
The superfluous keys will be removed during compactions, as they do not
belong on these shards.
Resolves#10027.
## Summary of changes
Only zero out the truncated FSM page on the owning shard.
## Problem
part of https://github.com/neondatabase/neon/issues/9114
gc-compaction can take a long time. This patch adds support for
scheduling a gc-compaction job. The compaction loop will first handle
L0->L1 compaction, and then gc compaction. The scheduled jobs are stored
in a non-persistent queue within the tenant structure.
This will be the building block for the partial compaction trigger -- if
the system determines that we need to do a gc compaction, it will
partition the keyspace and schedule several jobs. Each of these jobs
will run for a short amount of time (i.e, 1 min). L0 compaction will be
prioritized over gc compaction.
## Summary of changes
* Add compaction scheduler in tenant.
* Run scheduled compaction in integration tests.
* Change the manual compaction API to allow schedule a compaction
instead of immediately doing it.
* Add LSN upper bound as gc-compaction parameter. If we schedule partial
compactions, gc_cutoff might move across different runs. Therefore, we
need to pass a pre-determined gc_cutoff beforehand. (TODO: support LSN
lower bound so that we can compact arbitrary "rectangle" in the layer
map)
* Refactor the gc_compaction internal interface.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We need a higher concurrency during reconfiguration in case of many DBs,
but the instance is already running and used by the client. We can
easily get out of `max_connections` limit, and the current code won't
handle that.
## Summary of changes
Default to 1, but also allow control plane to override this value for
specific projects. It's also recommended to bump
`superuser_reserved_connections` += `reconfigure_concurrency` for such
projects to ensure that we always have enough spare connections for
reconfiguration process to succeed.
Quick workaround for neondatabase/cloud#17846
## Problem
The node shard scan timeout of 1 second is a bit too aggressive, and
we've seen this cause test failures. The scans are performed in parallel
across nodes, and the entire operation has a 15 second timeout.
Resolves#9801.
## Summary of changes
Increase the timeout to 5 seconds. This is still enough to time out on a
network failure and retry successfully within 15 seconds.
Like #9931 but without rebasing upstream just yet, to try and minimise
the differences.
Removes all proxy-specific commits from the rust-postgres fork, now that
proxy no longer depends on them. Merging upstream changes to come later.
Closes#9387.
## Problem
`BufferedWriter` cannot proceed while the owned buffer is flushing to
disk. We want to implement double buffering so that the flush can happen
in the background. See #9387.
## Summary of changes
- Maintain two owned buffers in `BufferedWriter`.
- The writer is in charge of copying the data into owned, aligned
buffer, once full, submit it to the flush task.
- The flush background task is in charge of flushing the owned buffer to
disk, and returned the buffer to the writer for reuse.
- The writer and the flush background task communicate through a
bi-directional channel.
For in-memory layer, we also need to be able to read from the buffered
writer in `get_values_reconstruct_data`. To handle this case, we did the
following
- Use replace `VirtualFile::write_all` with `VirtualFile::write_all_at`,
and use `Arc` to share it between writer and background task.
- leverage `IoBufferMut::freeze` to get a cheaply clonable `IoBuffer`,
one clone will be submitted to the channel, the other clone will be
saved within the writer to serve reads. When we want to reuse the
buffer, we can invoke `IoBuffer::into_mut`, which gives us back the
mutable aligned buffer.
- InMemoryLayer reads is now aware of the maybe_flushed part of the
buffer.
**Caveat**
- We removed the owned version of write, because this interface does not
work well with buffer alignment. The result is that without direct IO
enabled,
[`download_object`](a439d57050/pageserver/src/tenant/remote_timeline_client/download.rs (L243))
does one more memcpy than before this PR due to the switch to use
`_borrowed` version of the write.
- "Bypass aligned part of write" could be implemented later to avoid
large amount of memcpy.
**Testing**
- use an oneshot channel based control mechanism to make flush behavior
deterministic in test.
- test reading from `EphemeralFile` when the last submitted buffer is
not flushed, in-progress, and done flushing to disk.
## Performance
We see performance improvement for small values, and regression on big
values, likely due to being CPU bound + disk write latency.
[Results](https://www.notion.so/neondatabase/Benchmarking-New-BufferedWriter-11-20-2024-143f189e0047805ba99acda89f984d51?pvs=4)
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We have a scale test for the storage controller which also acts as a
good stress test for scheduling stability. However, it created nodes
with no AZs set.
## Summary of changes
- Bump node count to 6 and set AZs on them.
This is a precursor to other AZ-related PRs, to make sure any new code
that's landed is getting scale tested in an AZ-aware environment.
## Problem
We practice a manual release flow for the compute module. This will
allow automation of the compute release process.
## Summary of changes
The workflow was modified to make a compute release automatically on the
branch release-compute.
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
Reqwest errors don't include details about the inner source error. This
means that we get opaque errors like:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config)
```
Instead of the more helpful:
```
receive body: error sending request for url (http://localhost:9898/v1/location_config): operation timed out
```
Touches #9801.
## Summary of changes
Include the source error for `reqwest::Error` wherever it's displayed.
## Problem
When client specifies `application_name`, pgbouncer propagates it to the
Postgres. Yet, if client doesn't do it, we have hard time figuring out
who opens a lot of Postgres connections (including the `cloud_admin`
ones).
See this investigation as an example:
https://neondb.slack.com/archives/C0836R0RZ0D
## Summary of changes
I haven't found this documented, but it looks like pgbouncer accepts
standard Postgres connstring parameters in the connstring in the
`[databases]` section, so put the default `application_name=pgbouncer`
there. That way, we will always see who opens Postgres connections. I
did tests, and if client specifies a `application_name`, pgbouncer
overrides this default, so it only works if it's not specified or set to
blank `&application_name=` in the connection string.
This is the last place we could potentially open some Postgres
connections without `application_name`. Everything else should be either
of two:
1. Direct client connections without `application_name`, but these
should be strictly non-`cloud_admin` ones
2. Some ad-hoc internal connections, so if we see spikes of unidentified
`cloud_admin` connections, we will need to investigate it again.
Fixesneondatabase/cloud#20948
(stacked on #9990 and #9995)
Partially fixes#1287 with a custom option field to enable the fixed
behaviour. This allows us to gradually roll out the fix without silently
changing the observed behaviour for our customers.
related to https://github.com/neondatabase/cloud/issues/15284
## Problem
During deploys, we see a lot of 500 errors due to heapmap uploads for
inactive tenants. These should be 503s instead.
Resolves#9574.
## Summary of changes
Make the secondary tenant scheduler use `ApiError` rather than
`anyhow::Error`, to propagate the tenant error and convert it to an
appropriate status code.
## Problem
we tried different parallelism settings for ingest bench
## Summary of changes
the following settings seem optimal after merging
- SK side Wal filtering
- batched getpages
Settings:
- effective_io_concurrency 100
- concurrency limit 200 (different from Prod!)
- jobs 4, maintenance workers 7
- 10 GB chunk size
## Problem
```
2024-12-03T15:42:46.5978335Z + poetry run python /__w/neon/neon/scripts/ingest_perf_test_result.py --ingest /__w/neon/neon/test_runner/perf-report-local
2024-12-03T15:42:49.5325077Z Traceback (most recent call last):
2024-12-03T15:42:49.5325603Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 165, in <module>
2024-12-03T15:42:49.5326029Z main()
2024-12-03T15:42:49.5326316Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 155, in main
2024-12-03T15:42:49.5326739Z ingested = ingest_perf_test_result(cur, item, recorded_at_timestamp)
2024-12-03T15:42:49.5327488Z ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2024-12-03T15:42:49.5327914Z File "/__w/neon/neon/scripts/ingest_perf_test_result.py", line 99, in ingest_perf_test_result
2024-12-03T15:42:49.5328321Z psycopg2.extras.execute_values(
2024-12-03T15:42:49.5328940Z File "/github/home/.cache/pypoetry/virtualenvs/non-package-mode-_pxWMzVK-py3.11/lib/python3.11/site-packages/psycopg2/extras.py", line 1299, in execute_values
2024-12-03T15:42:49.5335618Z cur.execute(b''.join(parts))
2024-12-03T15:42:49.5335967Z psycopg2.errors.InvalidTextRepresentation: invalid input syntax for type numeric: "concurrent-futures"
2024-12-03T15:42:49.5336287Z LINE 57: 'concurrent-futures',
2024-12-03T15:42:49.5336462Z ^
```
## Summary of changes
- `test_page_service_batching`: save non-numeric params as `labels`
- Add a runtime check that `metric_value` is NUMERIC
Before this PR, some override callbacks used `.default()`, others
used `.setdefault()`.
As of this PR, all callbacks use `.setdefault()` which I think is least
prone to failure.
Aligning on a single way will set the right example for future tests
that need such customization.
The `test_pageserver_getpage_throttle.py` technically is a change in
behavior: before, it replaced the `tenant_config` field, now it just
configures the throttle. This is what I believe is intended anyway.
Support tenant manifests in the storage scrubber:
* list the manifests, order them by generation
* delete all manifests except for the two most recent generations
* for the latest manifest: try parsing it.
I've tested this patch by running the against a staging bucket and it
successfully deleted stuff (and avoided deleting the latest two
generations).
In follow-up work, we might want to also check some invariants of the
manifest, as mentioned in #8088.
Part of #9386
Part of #8088
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The Pageserver signal handler would only respond to a single signal and
initiate shutdown. Subsequent signals were ignored. This meant that a
`SIGQUIT` sent after a `SIGTERM` had no effect (e.g. in the case of a
slow or stalled shutdown). The `test_runner` uses this to force shutdown
if graceful shutdown is slow.
Touches #9740.
## Summary of changes
Keep responding to signals after the initial shutdown signal has been
received.
Arguably, the `test_runner` should also use `SIGKILL` rather than
`SIGQUIT` in this case, but it seems reasonable to respond to `SIGQUIT`
regardless.
Keeping the `mock` postgres cplane adaptor using "stock" tokio-postgres
allows us to remove a lot of dead weight from our actual postgres
connection logic.
## Problem
We saw a peculiar case where a pageserver apparently got a 0-tenant
response to `/re-attach` but we couldn't see the request landing on a
storage controller. It was hard to confirm retrospectively that the
pageserver was configured properly at the moment it sent the request.
## Summary of changes
- Log the URL to which we are sending the request
- Log the NodeId and metadata that we sent
## Problem
Sharded tenants should be run in a single AZ for best performance, so
that computes have AZ-local latency to all the shards.
Part of https://github.com/neondatabase/neon/issues/8264
## Summary of changes
- When we split a tenant, instead of updating each shard's preferred AZ
to wherever it is scheduled, propagate the preferred AZ from the parent.
- Drop the check in `test_shard_preferred_azs` that asserts shards end
up in their preferred AZ: this will not be true again until the
optimize_attachment logic is updated to make this so. The existing check
wasn't testing anything about scheduling, it was just asserting that we
set preferred AZ in a way that matches the way things happen to be
scheduled at time of split.
## Problem
In the batching PR
- https://github.com/neondatabase/neon/pull/9870
I stopped deducting the time-spent-in-throttle fro latency metrics,
i.e.,
- smgr latency metrics (`SmgrOpTimer`)
- basebackup latency (+scan latency, which I think is part of
basebackup).
The reason for stopping the deduction was that with the introduction of
batching, the trick with tracking time-spent-in-throttle inside
RequestContext and swap-replacing it from the `impl Drop for
SmgrOpTimer` no longer worked with >1 requests in a batch.
However, deducting time-spent-in-throttle is desirable because our
internal latency SLO definition does not account for throttling.
## Summary of changes
- Redefine throttling to be a page_service pagestream request throttle
instead of a throttle for repository `Key` reads through `Timeline::get`
/ `Timeline::get_vectored`.
- This means reads done by `basebackup` are no longer subject to any
throttle.
- The throttle applies after batching, before handling of the request.
- Drive-by fix: make throttle sensitive to cancellation.
- Rename metric label `kind` from `timeline_get` to `pagestream` to
reflect the new scope of throttling.
To avoid config format breakage, we leave the config field named
`timeline_get_throttle` and ignore the `task_kinds` field.
This will be cleaned up in a future PR.
## Trade-Offs
Ideally, we would apply the throttle before reading a request off the
connection, so that we queue the minimal amount of work inside the
process.
However, that's not possible because we need to do shard routing.
The redefinition of the throttle to limit pagestream request rate
instead of repository `Key` rate comes with several downsides:
- We're no longer able to use the throttle mechanism for other other
tasks, e.g. image layer creation.
However, in practice, we never used that capability anyways.
- We no longer throttle basebackup.
## Problem
`test_sharded_ingest` ingests a lot of data, which can cause shutdown to
be slow e.g. due to local "S3 uploads" or compactions. This can cause
test flakes during teardown.
Resolves#9740.
## Summary of changes
Perform an immediate shutdown of the cluster.
## Problem
We don't have good observability for memory usage. This would be useful
e.g. to debug OOM incidents or optimize performance or resource usage.
We would also like to use continuous profiling with e.g. [Grafana Cloud
Profiles](https://grafana.com/products/cloud/profiles-for-continuous-profiling/)
(see https://github.com/neondatabase/cloud/issues/14888).
This PR is intended as a proof of concept, to try it out in staging and
drive further discussions about profiling more broadly.
Touches https://github.com/neondatabase/neon/issues/9534.
Touches https://github.com/neondatabase/cloud/issues/14888.
Depends on #9779.
Depends on #9780.
## Summary of changes
Adds a HTTP route `/profile/heap` that takes a heap profile and returns
it. Query parameters:
* `format`: output format (`jemalloc` or `pprof`; default `pprof`).
Unlike CPU profiles (see #9764), heap profiles are not symbolized and
require the original binary to translate addresses to function names. To
make this work with Grafana, we'll probably have to symbolize the
process server-side -- this is left as future work, as is other output
formats like SVG.
Heap profiles don't work on macOS due to limitations in jemalloc.
## Problem
The extensions for Postgres v17 are ready but we do not test the
extensions shipped with v17
## Summary of changes
Build the test image based on Postgres v17. Run the tests for v17.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
This PR
- fixes smgr metrics https://github.com/neondatabase/neon/issues/9925
- adds an additional startup log line logging the current batching
config
- adds a histogram of batch sizes global and per-tenant
- adds a metric exposing the current batching config
The issue described #9925 is that before this PR, request latency was
only observed *after* batching.
This means that smgr latency metrics (most importantly getpage latency)
don't account for
- `wait_lsn` time
- time spent waiting for batch to fill up / the executor stage to pick
up the batch.
The fix is to use a per-request batching timer, like we did before the
initial batching PR.
We funnel those timers through the entire request lifecycle.
I noticed that even before the initial batching changes, we weren't
accounting for the time spent writing & flushing the response to the
wire.
This PR drive-by fixes that deficiency by dropping the timers at the
very end of processing the batch, i.e., after the `pgb.flush()` call.
I was **unable to maintain the behavior that we deduct
time-spent-in-throttle from various latency metrics.
The reason is that we're using a *single* counter in `RequestContext` to
track micros spent in throttle.
But there are *N* metrics timers in the batch, one per request.
As a consequence, the practice of consuming the counter in the drop
handler of each timer no longer works because all but the first timer
will encounter error `close() called on closed state`.
A failed attempt to maintain the current behavior can be found in
https://github.com/neondatabase/neon/pull/9951.
So, this PR remvoes the deduction behavior from all metrics.
I started a discussion on Slack about it the implications this has for
our internal SLO calculation:
https://neondb.slack.com/archives/C033RQ5SPDH/p1732910861704029
# Refs
- fixes https://github.com/neondatabase/neon/issues/9925
- sub-issue https://github.com/neondatabase/neon/issues/9377
- epic: https://github.com/neondatabase/neon/issues/9376
Before this PR, the storcon_cli didn't have a way to show the
tenant-wide information of the TenantDescribeResponse.
Sadly, the `Serialize` impl for the tenant config doesn't skip on
`None`, so, the output becomes a bit bloated.
Maybe we can use `skip_serializing_if(Option::is_none)` in the future.
=> https://github.com/neondatabase/neon/issues/9983
## Problem
I was touching `test_storage_controller_node_deletion` because for AZ
scheduling work I was adding a change to the storage controller (kick
secondaries during optimisation) that made a FIXME in this test defunct.
While looking at it I also realized that we can easily fix the way node
deletion currently doesn't use a proper ScheduleContext, using the
iterator type recently added for that purpose.
## Summary of changes
- A testing-only behavior in storage controller where if a secondary
location isn't yet ready during optimisation, it will be actively
polled.
- Remove workaround in `test_storage_controller_node_deletion` that
previously was needed because optimisation would get stuck on cold
secondaries.
- Update node deletion code to use a `TenantShardContextIterator` and
thereby a proper ScheduleContext
## Problem
After enabling LFC in tests and lowering `shared_buffers` we started
having more problems with `test_pg_regress`.
## Summary of changes
Set `shared_buffers` to 1MB to both exercise getPage requests/LFC, and
still have enough room for Postgres to operate. Everything smaller might
be not enough for Postgres under load, and can cause errors like 'no
unpinned buffers available'.
See Konstantin's comment [1] as well.
Fixes#9956
[1]:
https://github.com/neondatabase/neon/issues/9956#issuecomment-2511608097
On reconfigure, we no longer passed a port for the extension server
which caused us to not write out the neon.extension_server_port line.
Thus, Postgres thought we were setting the port to the default value of
0. PGC_POSTMASTER GUCs cannot be set at runtime, which causes the
following log messages:
> LOG: parameter "neon.extension_server_port" cannot be changed without
restarting the server
> LOG: configuration file
"/var/db/postgres/compute/pgdata/postgresql.conf" contains errors;
unaffected changes were applied
Fixes: https://github.com/neondatabase/neon/issues/9945
Signed-off-by: Tristan Partin <tristan@neon.tech>
The spec was written for the buggy protocol which we had before the one
more similar to Raft was implemented. Update the spec with what we
currently have.
ref https://github.com/neondatabase/neon/issues/8699
## Problem
The credentials providers tries to connect to AWS STS even when we use
plain Redis connections.
## Summary of changes
* Construct the CredentialsProvider only when needed ("irsa").
## Problem
`if: ${{ github.event.schedule }}` gets skipped if a previous step has
failed, but we want to run the step for both `success` and `failure`
## Summary of changes
- Add `!cancelled()` to notification step if-condition, to skip only
cancelled jobs
Fixes https://github.com/neondatabase/cloud/issues/20973.
This refactors `connect_raw` in order to return direct access to the
delayed notices.
I cannot find a way to test this with psycopg2 unfortunately, although
testing it with psql does return the expected results.
## Problem
We can't easily tell how far the state of shards is from their AZ
preferences. This can be a cause of performance issues, so it's
important for diagnosability that we can tell easily if there are
significant numbers of shards that aren't running in their preferred AZ.
Related: https://github.com/neondatabase/cloud/issues/15413
## Summary of changes
- In reconcile_all, count shards that are scheduled into the wrong AZ
(if they have a preference), and publish it as a prometheus gauge.
- Also calculate a statistic for how many shards wanted to reconcile but
couldn't.
This is clearly a lazy calculation: reconcile all only runs
periodically. But that's okay: shards in the wrong AZ is something that
only matters if it stays that way for some period of time.
Improves `wait_until` by:
* Use `timeout` instead of `iterations`. This allows changing the
timeout/interval parameters independently.
* Make `timeout` and `interval` optional (default 20s and 0.5s). Most
callers don't care.
* Only output status every 1s by default, and add optional
`status_interval` parameter.
* Remove `show_intermediate_error`, this was always emitted anyway.
Most callers have been updated to use the defaults, except where they
had good reason otherwise.
## Problem
We saw unexpected container terminations when running in k8s with with
small CPU resource requests.
The /status and /ready handlers called `maybe_forward`, which always
takes the lock on Service::inner.
If there is a lot of writer lock contention, and the container is
starved of CPU, this increases the likelihood that we will get killed by
the kubelet.
It isn't certain that this was a cause of issues, but it is a potential
source that we can eliminate.
## Summary of changes
- Revise logic to return immediately if the URL is in the non-forwarded
list, rather than calling maybe_forward
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1732110190129479
We observe the following error in the logs
```
[XX000] ERROR: [NEON_SMGR] [shard 3] Incorrect prefetch read: status=1 response=0x7fafef335138 my=128 receive=128
```
most likely caused by changing `neon.readahead_buffer_size`
## Summary of changes
1. Copy shard state
2. Do not use prefetch_set_unused in readahead_buffer_resize
3. Change prefetch buffer overflow criteria
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Current compute images for Postgres 14-16 don't build on Debian 12
because of issues with extensions.
This PR fixes that, but for the current setup, it is mostly a no-op
change.
## Summary of changes
- Use `/bin/bash -euo pipefail` as SHELL to fail earlier
- Fix `plv8` build: backport a trivial patch for v8
- Fix `postgis` build: depend `sfgal` version on Debian version instead
of Postgres version
Tested in: https://github.com/neondatabase/neon/pull/9849
#8564
## Problem
The main and backup consumption metric pushes are completely
independent,
resulting in different event time windows and different idempotency
keys.
## Summary of changes
* Merge the push tasks, but keep chunks the same size.
# Problem
The timeout-based batching adds latency to unbatchable workloads.
We can choose a short batching timeout (e.g. 10us) but that requires
high-resolution timers, which tokio doesn't have.
I thoroughly explored options to use OS timers (see
[this](https://github.com/neondatabase/neon/pull/9822) abandoned PR).
In short, it's not an attractive option because any timer implementation
adds non-trivial overheads.
# Solution
The insight is that, in the steady state of a batchable workload, the
time we spend in `get_vectored` will be hundreds of microseconds anyway.
If we prepare the next batch concurrently to `get_vectored`, we will
have a sizeable batch ready once `get_vectored` of the current batch is
done and do not need an explicit timeout.
This can be reasonably described as **pipelining of the protocol
handler**.
# Implementation
We model the sub-protocol handler for pagestream requests
(`handle_pagrequests`) as two futures that form a pipeline:
2. Batching: read requests from the connection and fill the current
batch
3. Execution: `take` the current batch, execute it using `get_vectored`,
and send the response.
The Reading and Batching stage are connected through a new type of
channel called `spsc_fold`.
See the long comment in the `handle_pagerequests_pipelined` for details.
# Changes
- Refactor `handle_pagerequests`
- separate functions for
- reading one protocol message; produces a `BatchedFeMessage` with just
one page request in it
- batching; tried to merge an incoming `BatchedFeMessage` into an
existing `BatchedFeMessage`; returns `None` on success and returns back
the incoming message in case merging isn't possible
- execution of a batched message
- unify the timeline handle acquisition & request span construction; it
now happen in the function that reads the protocol message
- Implement serial and pipelined model
- serial: what we had before any of the batching changes
- read one protocol message
- execute protocol messages
- pipelined: the design described above
- optionality for execution of the pipeline: either via concurrent
futures vs tokio tasks
- Pageserver config
- remove batching timeout field
- add ability to configure pipelining mode
- add ability to limit max batch size for pipelined configurations
(required for the rollout, cf
https://github.com/neondatabase/cloud/issues/20620 )
- ability to configure execution mode
- Tests
- remove `batch_timeout` parametrization
- rename `test_getpage_merge_smoke` to `test_throughput`
- add parametrization to test different max batch sizes and execution
moes
- rename `test_timer_precision` to `test_latency`
- rename the test case file to `test_page_service_batching.py`
- better descriptions of what the tests actually do
## On the holding The `TimelineHandle` in the pending batch
While batching, we hold the `TimelineHandle` in the pending batch.
Therefore, the timeline will not finish shutting down while we're
batching.
This is not a problem in practice because the concurrently ongoing
`get_vectored` call will fail quickly with an error indicating that the
timeline is shutting down.
This results in the Execution stage returning a `QueryError::Shutdown`,
which causes the pipeline / entire page service connection to shut down.
This drops all references to the
`Arc<Mutex<Option<Box<BatchedFeMessage>>>>` object, thereby dropping the
contained `TimelineHandle`s.
- => fixes https://github.com/neondatabase/neon/issues/9850
# Performance
Local run of the benchmarks, results in [this empty
commit](1cf5b1463f)
in the PR branch.
Key take-aways:
* `concurrent-futures` and `tasks` deliver identical `batching_factor`
* tail latency impact unknown, cf
https://github.com/neondatabase/neon/issues/9837
* `concurrent-futures` has higher throughput than `tasks` in all
workloads (=lower `time` metric)
* In unbatchable workloads, `concurrent-futures` has 5% higher
`CPU-per-throughput` than that of `tasks`, and 15% higher than that of
`serial`.
* In batchable-32 workload, `concurrent-futures` has 8% lower
`CPU-per-throughput` than that of `tasks` (comparison to tput of
`serial` is irrelevant)
* in unbatchable workloads, mean and tail latencies of
`concurrent-futures` is practically identical to `serial`, whereas
`tasks` adds 20-30us of overhead
Overall, `concurrent-futures` seems like a slightly more attractive
choice.
# Rollout
This change is disabled-by-default.
Rollout plan:
- https://github.com/neondatabase/cloud/issues/20620
# Refs
- epic: https://github.com/neondatabase/neon/issues/9376
- this sub-task: https://github.com/neondatabase/neon/issues/9377
- the abandoned attempt to improve batching timeout resolution:
https://github.com/neondatabase/neon/pull/9820
- closes https://github.com/neondatabase/neon/issues/9850
- fixes https://github.com/neondatabase/neon/issues/9835
## Problem
It appears that the Azure storage API tends to hang TCP connections more
than S3 does.
Currently we use a 2 minute timeout for all downloads. This is large
because sometimes the objects we download are large. However, waiting 2
minutes when doing something like downloading a manifest on tenant
attach is problematic, because when someone is doing a "create tenant,
create timeline" workflow, that 2 minutes is long enough for them
reasonably to give up creating that timeline.
Rather than propagate oversized timeouts further up the stack, we should
use a different timeout for objects that we expect to be small.
Closes: https://github.com/neondatabase/neon/issues/9836
## Summary of changes
- Add a `small_timeout` configuration attribute to remote storage,
defaulting to 30 seconds (still a very generous period to do something
like download an index)
- Add a DownloadKind parameter to DownloadOpts, so that callers can
indicate whether they expect the object to be small or large.
- In the azure client, use small timeout for HEAD requests, and for GET
requests if DownloadKind::Small is used.
- Use DownloadKind::Small for manifests, indices, and heatmap downloads.
This PR intentionally does not make the equivalent change to the S3
client, to reduce blast radius in case this has unexpected consequences
(we could accomplish the same thing by editing lots of configs, but just
skipping the code is simpler for right now)
## Problem
It was not always possible to judge what exactly some `cloud_admin`
connections were doing because we didn't consistently set
`application_name` everywhere.
## Summary of changes
Unify the way we connect to Postgres:
1. Switch to building configs everywhere
2. Always set `application_name` and make naming consistent
Follow-up for #9919
Part of neondatabase/cloud#20948
## Problem
To add Safekeeper heap profiling in #9778, we need to switch to an
allocator that supports it. Pageserver and proxy already use jemalloc.
Touches #9534.
## Summary of changes
Use jemalloc in Safekeeper.
## Problem
When picking locations for a shard, we should use a ScheduleContext that
includes all the other shards in the tenant, so that we apply proper
anti-affinity between shards. If we don't do this, then it can lead to
unstable scheduling, where we place a shard somewhere that the optimizer
will then immediately move it away from.
We didn't always do this, because it was a bit awkward to accumulate the
context for a tenant rather than just walking tenants.
This was a TODO in `handle_node_availability_transition`:
```
// TODO: populate a ScheduleContext including all shards in the same tenant_id (only matters
// for tenants without secondary locations: if they have a secondary location, then this
// schedule() call is just promoting an existing secondary)
```
This is a precursor to https://github.com/neondatabase/neon/issues/8264,
where the current imperfect scheduling during node evacuation hampers
testing.
## Summary of changes
- Add an iterator type that yields each shard along with a
schedulecontext that includes all the other shards from the same tenant
- Use the iterator to replace hand-crafted logic in optimize_all_plan
(functionally identical)
- Use the iterator in `handle_node_availability_transition` to apply
proper anti-affinity during node evacuation.
Our rust-postgres fork is getting messy. Mostly because proxy wants more
control over the raw protocol than tokio-postgres provides. As such,
it's diverging more and more. Storage and compute also make use of
rust-postgres, but in more normal usage, thus they don't need our crazy
changes.
Idea:
* proxy maintains their subset
* other teams use a minimal patch set against upstream rust-postgres
Reviewing this code will be difficult. To implement it, I
1. Copied tokio-postgres, postgres-protocol and postgres-types from
00940fcdb5
2. Updated their package names with the `2` suffix to make them compile
in the workspace.
3. Updated proxy to use those packages
4. Copied in the code from tokio-postgres-rustls 0.13 (with some patches
applied https://github.com/jbg/tokio-postgres-rustls/pull/32https://github.com/jbg/tokio-postgres-rustls/pull/33)
5. Removed as much dead code as I could find in the vendored libraries
6. Updated the tokio-postgres-rustls code to use our existing channel
binding implementation
Adds a benchmark for logical message WAL ingestion throughput
end-to-end. Logical messages are essentially noops, and thus ignored by
the Pageserver.
Example results from my MacBook, with fsync enabled:
```
postgres_ingest: 14.445 s
safekeeper_ingest: 29.948 s
pageserver_ingest: 30.013 s
pageserver_recover_ingest: 8.633 s
wal_written: 10,340 MB
message_count: 1310720 messages
postgres_throughput: 715 MB/s
safekeeper_throughput: 345 MB/s
pageserver_throughput: 344 MB/s
pageserver_recover_throughput: 1197 MB/s
```
See
https://github.com/neondatabase/neon/issues/9642#issuecomment-2475995205
for running analysis.
Touches #9642.
## Problem
We used `set_path()` to replace the database name in the connection
string. It automatically does url-safe encoding if the path is not
already encoded, but it does it as per the URL standard, which assumes
that tabs can be safely removed from the path without changing the
meaning of the URL. See, e.g.,
https://url.spec.whatwg.org/#concept-basic-url-parser. It also breaks
for DBs with properly %-encoded names, like with `%20`, as they are kept
intact, but actually should be escaped.
Yet, this is not true for Postgres, where it's completely valid to have
trailing tabs in the database name.
I think this is the PR that caused this regression
https://github.com/neondatabase/neon/pull/9717, as it switched from
`postgres::config::Config` back to `set_path()`.
This was fixed a while ago already [1], btw, I just haven't added a test
to catch this regression back then :(
## Summary of changes
This commit changes the code back to use
`postgres/tokio_postgres::Config` everywhere.
While on it, also do some changes around, as I had to touch this code:
1. Bump some logging from `debug` to `info` in the spec apply path. We
do not use `debug` in prod, and it was tricky to understand what was
going on with this bug in prod.
2. Refactor configuration concurrency calculation code so it was
reusable. Yet, still keep `1` in the case of reconfiguration. The
database can be actively used at this moment, so we cannot guarantee
that there will be enough spare connection slots, and the underlying
code won't handle connection errors properly.
3. Simplify the installed extensions code. It was spawning a blocking
task inside async function, which doesn't make much sense. Instead, just
have a main sync function and call it with `spawn_blocking` in the API
code -- the only place we need it to be async.
4. Add regression python test to cover this and related problems in the
future. Also, add more extensive testing of schema dump and DBs and
roles listing API.
[1]:
4d1e48f3b9
[2]:
https://www.postgresql.org/message-id/flat/20151023003445.931.91267%40wrigleys.postgresql.orgResolvesneondatabase/cloud#20869
## Problem
Currently, we rerun only known flaky tests. This approach was chosen to
reduce the number of tests that go unnoticed (by forcing people to take
a look at failed tests and rerun the job manually), but it has some
drawbacks:
- In PRs, people tend to push new changes without checking failed tests
(that's ok)
- In the main, tests are just restarted without checking
(understandable)
- Parametrised tests become flaky one by one, i.e. if `test[1]` is flaky
`, test[2]` is not marked as flaky automatically (which may or may not
be the case).
I suggest rerunning all failed tests to increase the stability of GitHub
jobs and using the Grafana Dashboard with flaky tests for deeper
analysis.
## Summary of changes
- Rerun all failed tests twice at max
## Problem
For the interpreted proto the pageserver is not returning the correct
LSN
in replies to keep alive requests. This is because the interpreted
protocol arm
was not updating `last_rec_lsn`.
## Summary of changes
* Return correct LSN in keep-alive responses
* Fix shard field in wal sender traces
We keep the practice of keeping the compiler up to date, pointing to the
latest release. This is done by many other projects in the Rust
ecosystem as well.
[Release notes](https://releases.rs/docs/1.83.0/).
Also update `cargo-hakari`, `cargo-deny`, `cargo-hack` and
`cargo-nextest` to their latest versions.
Prior update was in #9445.
## Problem
We currently see elevated levels of errors for GetBlob requests. This is
because 404 and 304 are counted as errors for metric reporting.
## Summary of Changes
Bring the implementation in line with the S3 client and treat 404 and
304 responses as ok for metric purposes.
Related: https://github.com/neondatabase/cloud/issues/20666
## Problem
For cancellation, a connection is open during all the cancel checks.
## Summary of changes
Spawn cancellation checks in the background, and close connection
immediately.
Use task_tracker for cancellation checks.
# Problem
VM (visibility map) pages are stored and managed as any regular relation
page, in the VM fork of the main relation. They are also sharded like
other pages. Regular WAL writes to the VM pages (typically performed by
vacuum) are routed to the correct shard as usual. However, VM pages are
also updated via `ClearVmBits` metadata records emitted when main
relation pages are updated. These metadata records were sent to all
shards, like other metadata records. This had the following effects:
* On shards responsible for VM pages, the `ClearVmBits` applies as
expected.
* On shard 0, which knows about the VM relation and its size but doesn't
necessarily have any VM pages, the `ClearVmBits` writes may have been
applied without also having applied the explicit WAL writes to VM pages.
* If VM pages are spread across multiple shards (unlikely with 256MB
stripe size), all shards may have applied `ClearVmBits` if the pages
fall within their local view of the relation size, even for pages they
do not own.
* On other shards, this caused a relation size cache miss and a DbDir
and RelDir lookup before dropping the `ClearVmBits`. With many
relations, this could cause significant CPU overhead.
This is not believed to be a correctness problem, but this will be
verified in #9914.
Resolves#9855.
# Changes
Route `ClearVmBits` metadata records only to the shards responsible for
the VM pages.
Verification of the current VM handling and cleanup of incomplete VM
pages on shard 0 (and potentially elsewhere) is left as follow-up work.
## Problem
close https://github.com/neondatabase/neon/issues/9859
## Summary of changes
Ensure that the deletion queue gets fully flushed (i.e., the deletion
lists get applied) during a graceful shutdown.
It is still possible that an incomplete shutdown would leave deletion
list behind and cause race upon the next startup, but we assume this
will unlikely happen, and even if it happened, the pageserver should
already be at a tainted state and the tenant should be moved to a new
tenant with a new generation number.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
* Promote two logs from mpsc send errors to error level. The channels
are unbounded and there shouldn't be errors.
* Fix one multiline log from anyhow::Error. Use Debug instead of
Display.
## Problem
When ingesting implicit `ClearVmBits` operations, we silently drop the
writes if the relation or page is unknown. There are implicit
assumptions around VM pages wrt. explicit/implicit updates, sharding,
and relation sizes, which can possibly drop writes incorrectly. Adding a
few metrics will allow us to investigate further and tighten up the
logic.
Touches #9855.
## Summary of changes
Add a `pageserver_wal_ingest_clear_vm_bits_unknown` metric to record
dropped `ClearVmBits` writes.
Also add comments clarifying the behavior of relation sizes on non-zero
shards.
Valid layer assumption is a necessary condition for a layer map to be
valid. It's a stronger check imposed by gc-compaction than the actual
valid layermap definition. Actually, the system can work as long as
there are no overlapping layer maps. Therefore, we degrade that into a
warning.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We don't have any observability for the relation size cache. We have
seen cache misses cause significant performance impact with high
relation counts.
Touches #9855.
## Summary of changes
Adds the following metrics:
* `pageserver_relsize_cache_entries`
* `pageserver_relsize_cache_hits`
* `pageserver_relsize_cache_misses`
* `pageserver_relsize_cache_misses_old`
## Problem
https://github.com/neondatabase/neon/pull/9746 lifted decoding and
interpretation of WAL to the safekeeper.
This reduced the ingested amount on the pageservers by around 10x for a
tenant with 8 shards, but doubled
the ingested amount for single sharded tenants.
Also, https://github.com/neondatabase/neon/pull/9746 uses bincode which
doesn't support schema evolution.
Technically the schema can be evolved, but it's very cumbersome.
## Summary of changes
This patch set addresses both problems by adding protobuf support for
the interpreted wal records and adding compression support. Compressed
protobuf reduced the ingested amount by 100x on the 32 shards
`test_sharded_ingest` case (compared to non-interpreted proto). For the
1 shard case the reduction is 5x.
Sister change to `rust-postgres` is
[here](https://github.com/neondatabase/rust-postgres/pull/33).
## Links
Related: https://github.com/neondatabase/neon/issues/9336
Epic: https://github.com/neondatabase/neon/issues/9329
## Problem
The `pre-merge-checks` workflow relies on the build-tools image.
If changes to the `build-tools` image have been merged into the main
branch since the last CI run for a PR (with other changes to the
`build-tools`), the image will be rebuilt during the merge queue run.
Otherwise, cached images are used.
Rebuilding the image adds approximately 10 minutes on x86-64 and 20
minutes on arm64 to the process.
## Summary of changes
- parametrise `build-build-tools-image` job with arch and Debian version
- Run `pre-merge-checks` only on Debian 12 x86-64 image
## Problem
ingest benchmark tests project migration to Neon involving steps
- COPY relation data
- create indexes
- create constraints
Previously we used only 4 copy jobs, 4 create index jobs and 7
maintenance workers. After increasing effective_io_concurrency on
compute we see that we can sustain more parallelism in the ingest bench
## Summary of changes
Increase copy jobs to 8, create index jobs to 8 and maintenance workers
to 16
## Problem
The RequestContext::span shouldn't live for the entire postgres
connection, only the handshake.
## Summary of changes
* Slight refactor to the RequestContext to discard the span upon
handshake completion.
* Make sure the temporary future for the handshake is dropped (not bound
to a variable)
* Runs our nightly fmt script
Before, we hardcoded the pg_version to 140000, while the code expected
version numbers like 14. Now we use an enum, and code from
`extension_server.rs` to auto-detect the correct version. The enum helps
when we add support for a version: enums ensure that compilation fails
if one forgets to put the version to one of the `match` locations.
cc https://github.com/neondatabase/neon/pull/9218
## Problem
Any errors from these async blocks are unconditionally logged at error
level
even though we already handle such errors based on context.
## Summary of changes
* Log raw errors from creating and executing cplane requests at debug
level.
* Inline macro calls to retain the correct callsite.
## Problem
The vast majority of the error/warn logs from cplane are about time or
data transfer quotas exceeded or endpoint-not-found errors and not
operational errors in proxy or cplane.
## Summary of changes
* Demote cplane error replies to info level.
* Raise other errors from warn back to error.
## Problem
For any given tenant shard, pageservers receive all of the tenant's WAL
from the safekeeper.
This soft-blocks us from using larger shard counts due to bandwidth
concerns and CPU overhead of filtering
out the records.
## Summary of changes
This PR lifts the decoding and interpretation of WAL from the pageserver
into the safekeeper.
A customised PG replication protocol is used where instead of sending
raw WAL, the safekeeper sends
filtered, interpreted records. The receiver drives the protocol
selection, so, on the pageserver side, usage
of the new protocol is gated by a new pageserver config:
`wal_receiver_protocol`.
More granularly the changes are:
1. Optionally inject the protocol and shard identity into the arguments
used for starting replication
2. On the safekeeper side, implement a new wal sending primitive which
decodes and interprets records
before sending them over
3. On the pageserver side, implement the ingestion of this new
replication message type. It's very similar
to what we already have for raw wal (minus decoding and interpreting).
## Notes
* This PR currently uses my [branch of
rust-postgres](https://github.com/neondatabase/rust-postgres/tree/vlad/interpreted-wal-record-replication-support)
which includes the deserialization logic for the new replication message
type. PR for that is open
[here](https://github.com/neondatabase/rust-postgres/pull/32).
* This PR contains changes for both pageservers and safekeepers. It's
safe to merge because the new protocol is disabled by default on the
pageserver side. We can gradually start enabling it in subsequent
releases.
* CI tests are running on https://github.com/neondatabase/neon/pull/9747
## Links
Related: https://github.com/neondatabase/neon/issues/9336
Epic: https://github.com/neondatabase/neon/issues/9329
## Problem
Prefetch is disabled at MacODS because `posix_fadvise` is not available.
But Neon prefetch is not using this function and for testing at MacOS is
it very convenient that prefetch is available.
## Summary of changes
Define `USE_PREFETCH` in Makefile.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We have a couple of CI workflows that still run on Debian Bullseye, and
the default Debian version in images is Bullseye as well (we explicitly
set building on Bookworm)
## Summary of changes
- Run `pgbench-pgvector` on Bookworm (fix a couple of packages)
- Run `trigger_bench_on_ec2_machine_in_eu_central_1` on Bookworm
- Change default `DEBIAN_VERSION` in Dockerfiles to Bookworm
- Make `pinned` docker tag an alias to `pinned-bookworm`
## Problem
close https://github.com/neondatabase/neon/issues/9761
The test assumed that no new L0 layers are flushed throughout the
process, which is not true.
## Summary of changes
Fix the test case `test_compaction_l0_memory` by flushing in-memory
layers before compaction.
Signed-off-by: Alex Chi Z <chi@neon.tech>
* The futures-util crate we use was yanked. Bump it and its siblings to
new patch release.
https://github.com/rust-lang/futures-rs/releases/tag/0.3.31
* cargo-deny: Drop an unused license.
* cargo-deny: Don't warn about duplicate crate. Duplicate crates are
unavoidable and the noise just hides real warnings.
## Problem
LFC is not enabled by default in tests, but it is enabled in production.
This increases the risk of errors in the production environment, which
were not found during the routine workflow.
However, enabling LFC for all the tests may overload the disk on our
servers and increase the number of failures.
So, we try enabling LFC in one case to evaluate the possible risk.
## Summary of changes
A new environment variable, USE_LFC is introduced. If it is set to true,
LFC is enabled by default in all the tests.
In our workflow, we enable LFC for PG17, release, x86-64, and disabled
for all other combinations.
---------
Co-authored-by: Alexey Masterov <alexeymasterov@neon.tech>
Co-authored-by: a-masterov <72613290+a-masterov@users.noreply.github.com>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Stas Kelvic <stas@neon.tech>
# Context
This PR contains PoC-level changes for a product feature that allows
onboarding large databases into Neon without going through the regular
data path.
# Changes
This internal RFC provides all the context
* https://github.com/neondatabase/cloud/pull/19799
In the language of the RFC, this PR covers
* the Importer code (`fast_import`)
* all the Pageserver changes (mgmt API changes, flow implementation,
etc)
* a basic test for the Pageserver changes
# Reviewing
As acknowledged in the RFC, the code added in this PR is not ready for
general availability.
Also, the **architecture is not to be discussed in this PR**, but in the
RFC and associated Slack channel instead.
Reviewers of this PR should take that into consideration.
The quality bar to apply during review depends on what area of the code
is being reviewed:
* Importer code (`fast_import`): practically anything goes
* Core flow (`flow.rs`):
* Malicious input data must be expected and the existing threat models
apply.
* The code must not be safe to execute on *dedicated* Pageserver
instances:
* This means in particular that tenants *on other* Pageserver instances
must not be affected negatively wrt data confidentiality, integrity or
availability.
* Other code: the usual quality bar
* Pay special attention to correct use of gate guards, timeline
cancellation in all places during shutdown & migration, etc.
* Consider the broader system impact; if you find potentially
problematic interactions with Storage features that were not covered in
the RFC, bring that up during the review.
I recommend submitting three separate reviews, for the three high-level
areas with different quality bars.
# References
(Internal-only)
* refs https://github.com/neondatabase/cloud/issues/17507
* refs https://github.com/neondatabase/company_projects/issues/293
* refs https://github.com/neondatabase/company_projects/issues/309
* refs https://github.com/neondatabase/cloud/issues/20646
---------
Co-authored-by: Stas Kelvich <stas.kelvich@gmail.com>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: John Spray <john@neon.tech>
to keep it consistent with existing compute metrics.
flux-fleet change is not needed, because it doesn't have any filter by
metric name for compute metrics.
## Problem
Follow up of https://github.com/neondatabase/neon/pull/9682, that patch
didn't fully address the problem: what if shutdown fails due to whatever
reason and then we reattach the tenant? Then we will still remove the
future layer. The underlying problem is that the fix for #5878 gets
voided because of the generation optimizations.
Of course, we also need to ensure that delete happens after uploads, but
note that we only schedule deletes when there are no ongoing upload
tasks, so that's fine.
## Summary of changes
* Add a test case to reproduce the behavior (by changing the original
test case to attach the same generation).
* If layer upload happens after the deletion, drain the deletion queue
before uploading.
* If blocked_deletion is enabled, directly remove it from the
blocked_deletion queue.
* Local fs backend fix to avoid race between deletion and preload.
* test_emergency_mode does not need to wait for uploads (and it's
generally not possible to wait for uploads).
* ~~Optimize deletion executor to skip validation if there are no files
to delete.~~ this doesn't work
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Follow up to https://github.com/neondatabase/neon/pull/9682, hopefully
we can detect some issues or assure ourselves that this is ready for
production.
## Summary of changes
* Add a compaction-detach-ancestor smoke test.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The HTTP router allowlists matched both on the path and the query
string. This meant that only `/profile/cpu` would be allowed without
auth, while `/profile/cpu?format=svg` would require auth.
Follows #9764.
## Summary of changes
* Match allowlists on URI path, rather than the entire URI.
* Fix the allowlist for Safekeeper to use `/profile/cpu` rather than the
old `/pprof/profile`.
* Just use a constant slice for the allowlist; it's only a handful of
items, and these handlers are not on hot paths.
## Problem
close https://github.com/neondatabase/neon/issues/9836
Looking at Azure SDK, the only related issue I can find is
https://github.com/azure/azure-sdk-for-rust/issues/1549. Azure uses
reqwest as the backend, so I assume there's some underlying magic
unknown to us that might have caused the stuck in #9836.
The observation is:
* We didn't get an explicit out of resource HTTP error from Azure.
* The connection simply gets stuck and times out.
* But when we retry after we reach the timeout, it succeeds.
This issue is hard to identify -- maybe something went wrong at the ABS
side, or something wrong with our side. But we know that a retry will
usually succeed if we give up the stuck connection.
Therefore, I propose the fix that we preempt stuck HTTP operation and
actively retry. This would mitigate the problem, while in the long run,
we need to keep an eye on ABS usage and see if we can fully resolve this
problem.
The reasoning of such timeout mechanism: we use a much smaller timeout
than before to preempt, while it is possible that a normal listing
operation would take a longer time than the initial timeout if it
contains a lot of keys. Therefore, after we terminate the connection, we
should double the timeout, so that such requests would eventually
succeed.
## Summary of changes
* Use exponential growth for ABS list timeout.
* Rather than using a fixed timeout, use a timeout that starts small and
grows
* Rather than exposing timeouts to the list_streaming caller as soon as
we see them, only do so after we have retried a few times
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Along with the migration to Python 3.11, I switched `C(str, Enum)` with
`C(StrEnum)`; one such example is the `PgVersion` enum.
It required more changes in `PgVersion` itself (before, it accepted both
`str` and `int`, and after it, it supports only `str`), which caused the
`test_bulk_insert` test to fail.
## Summary of changes
- `test_bulk_insert`: explicitly cast pg_version from `timeline_detail`
to str
I found the rightward drift of the `renew_jwks` function hard to review.
This PR splits out some major logic and uses early returns to make the
happy path more linear.
## Problem
We use a pretty old version of `mypy` 1.3 (released 1.5 years ago), it
produces false positives for `typing.Self`.
## Summary of changes
- Bump `mypy` from 1.3 to 1.13
- Fix new warnings and errors
- Use `typing.Self` whenever we `return self`
Without adding a newline, we can end up with a conf line that looks like
the following:
dynamic_shared_memory_type = mmap# Managed by compute_ctl: begin
This leads to Postgres logging:
LOG: configuration file
"/var/db/postgres/compute/pgdata/postgresql.conf" contains errors;
unaffected changes were applied
Signed-off-by: Tristan Partin <tristan@neon.tech>
The notifications need to be sent whenever the waiters heap changes, per
the comment in `update_status`. But if 'advance' is called when there
are no waiters, or the new LSN is lower than the waiters so that no one
needs to be woken up, there's no need to send notifications. This saves
some CPU cycles in the common case that there are no waiters.
## Problem
In https://github.com/neondatabase/neon/issues/9754 and the flakiness of
`test_readonly_node_gc`, we saw that although our logic for controlling
GC was sound, the validation of getpage requests was not, because it
could not consider LSN leases when requests arrived shortly after
restart.
Closes https://github.com/neondatabase/neon/issues/9754
## Summary of changes
This is the "Option 3" discussed verbally -- rather than holding back gc
cutoff, we waive the usual validation of request LSN if we are still
waiting for leases to be sent after startup
- When validating LSN in `wait_or_get_last_lsn`, skip the validation
relative to GC cutoff if the timeline is still in its LSN lease grace
period
- Re-enable test_readonly_node_gc
Calling unwrap on the encoder is a little overzealous. One of the errors
that can be returned by the encode function in particular is the
non-existence of metrics for a metric family, so we should prematurely
filter instances like that out. I believe that the cause of this panic
was caused by a race condition between the prometheus collector and the
compute collecting the installed extensions metric for the first time.
The HTTP server is spawned on a separate thread before we even start
bringing up Postgres.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We don't have a convenient way to gather CPU profiles from a running
binary, e.g. during production incidents or end-to-end benchmarks, nor
during microbenchmarks (particularly on macOS).
We would also like to have continuous profiling in production, likely
using [Grafana Cloud
Profiles](https://grafana.com/products/cloud/profiles-for-continuous-profiling/).
We may choose to use either eBPF profiles or pprof profiles for this
(pending testing and discussion with SREs), but pprof profiles appear
useful regardless for the reasons listed above. See
https://github.com/neondatabase/cloud/issues/14888.
This PR is intended as a proof of concept, to try it out in staging and
drive further discussions about profiling more broadly.
Touches #9534.
Touches https://github.com/neondatabase/cloud/issues/14888.
## Summary of changes
Adds a HTTP route `/profile/cpu` that takes a CPU profile and returns
it. Defaults to a 5-second pprof Protobuf profile for use with e.g.
`pprof` or Grafana Alloy, but can also emit an SVG flamegraph. Query
parameters:
* `format`: output format (`pprof` or `svg`)
* `frequency`: sampling frequency in microseconds (default 100)
* `seconds`: number of seconds to profile (default 5)
Also integrates pprof profiles into Criterion benchmarks, such that
flamegraph reports can be taken with `cargo bench ... --profile-duration
<seconds>`. Output under `target/criterion/*/profile/flamegraph.svg`.
Example profiles:
* pprof profile (use [`pprof`](https://github.com/google/pprof)):
[profile.pb.gz](https://github.com/user-attachments/files/17756788/profile.pb.gz)
* Web interface: `pprof -http :6060 profile.pb.gz`
* Interactive flamegraph:
[profile.svg.gz](https://github.com/user-attachments/files/17756782/profile.svg.gz)
Fixes the masking for the CancelKeyData display format. Due to negative
i32 cast to u64, the top-bits all had `0xffffffff` prefix. On the
bitwise-or that followed, these took priority.
This PR also compresses 3 logs during sql-over-http into 1 log with
durations as label fields, as prior discussed.
## Problem
On Debian 12 (Bookworm), Python 3.11 is the latest available version.
## Summary of changes
- Update Python to 3.11 in build-tools
- Fix ruff check / format
- Fix mypy
- Use `StrEnum` instead of pair `str`, `Enum`
- Update docs
## Problem
I have made a mistake in merging Postgre PRs
## Summary of changes
Restore consistency of submodule referenced.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We saw a scale test failure when one shard went
secondary->attached->secondary in a short period of time -- the metrics
for the shard failed a validation assertion that is meant to ensure the
size metric matches the sum of layer sizes in the SecondaryDetail
struct.
This appears to be due to two SecondaryTenants being alive at the same
time -- the first one was shut down but still had its contributions to
the metrics.
Closes: https://github.com/neondatabase/neon/issues/9628
## Summary of changes
- Refactor code for validating metrics and call it in shutdown as well
as during downloads
- Move code for dropping per-tenant secondary metrics from drop() into
shutdown(), so that once shutdown() completes it is definitely safe to
instantiate another SecondaryTenant for the same tenant.
Before, `OpenTelemetry` errors were printed to stdout/stderr directly,
causing one of the few log lines without a timestamp, like:
```
OpenTelemetry trace error occurred. error sending request for url (http://localhost:4318/v1/traces)
```
Now, we print:
```
2024-11-21T02:24:20.511160Z INFO OpenTelemetry error: error sending request for url (http://localhost:4318/v1/traces)
```
I found this while investigating #9731.
## Problem
```
curl -H "Neon-Connection-String: postgresql://neondb_owner:PASSWORD@ep-autumn-rain-a58lubg0.us-east-2.aws.neon.tech/neondb?sslmode=require" https://ep-autumn-rain-a58lubg0.us-east-2.aws.neon.tech/sql -d '{"query":"SELECT 1","params":[]}'
```
For such a query, I also need to send `params`. Do I really need it?
## Summary of changes
I've marked `params` as optional
Adds support to the `find_garbage` command to restrict itself to a
partial tenant ID prefix, say `a`, and then it only traverses tenants
with IDs starting with `a`. One can now pass the `--tenant-id-prefix`
parameter.
That way, one can shard the `find_garbage` command and make it run in
parallel.
The PR also does a change of how `remote_storage` first removes trailing
`/`s, only to then add them in the listing function. It turns out that
this isn't neccessary and it prevents the prefix functionality from
working. S3 doesn't do this either.
## Problem
We were hitting this assertion in debug mode tests sometimes.
This case was being hit when the parent shard has no resident layers.
For instance, this is the case on split retry where the previous attempt
shut-down the parent and deleted local state for it. If the logical size
calculation does not download some layers before we get to the
hardlinking, then the assertion is hit.
## Summary of Changes
Remove the assertion. It's fine for the ancestor to not have any
resident layers at the time of the split.
Closes https://github.com/neondatabase/neon/issues/9412
Follow up to #9803
See https://github.com/neondatabase/cloud/issues/14378
In collaboration with @cloneable and @awarus, we sifted through logs and
simply demoted some logs to debug. This is not at all finished and there
are more logs to review, but we ran out of time in the session we
organised. In any slightly more nuanced cases, we didn't touch the log,
instead leaving a TODO comment.
I've also slightly refactored the sql-over-http body read/length reject
code. I can split that into a separate PR. It just felt natural after I
switched to `read_body_with_limit` as we discussed during the meet.
## Problem
Long ago, in #5299 the tenant states for migration are added, but
respected only in a coarse-grained way: when hinted not to do deletions,
tenants will just avoid doing all GC or compaction.
Skipping compaction is not necessary for AttachedMulti, as we will soon
become the primary attached location, and it is not a waste of resources
to proceed with compaction. Instead, per the RFC
https://github.com/neondatabase/neon/pull/5029/files), deletions should
be queued up in this state, and executed later when we switch to
AttachedSingle.
Avoiding compaction in AttachedMulti can have an operational impact if a
tenant is under significant write load, as a long-running migration can
result in a large accumulation of delta layers with commensurate impact
on read latency.
Closes: https://github.com/neondatabase/neon/issues/5396
## Summary of changes
- Add a 'config' part to RemoteTimelineClient so that it can be aware of
the mode of the tenant it belongs to, and wire this through for
construction + updates
- Add a special buffer for delayed deletions, and when in AttachedMulti
route deletions here instead of into the main remote client queue. This
is drained when transitioning to AttachedSingle. If the tenant is
detached or our process dies before then, then these objects are leaked.
- As a quality of life improvement, also use the remote timeline
client's knowledge of the tenant state to avoid submitting remote
consistent LSN updates for validation when in AttachedStale (as we know
these will fail)
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
SLRU blocks, which can add up to several gigabytes, are currently
ingested by all shards, multiplying their capacity cost by the shard
count and slowing down ingest. We do this because all shards need the
SLRU pages to do timestamp->LSN lookup for GC.
Related: https://github.com/neondatabase/neon/issues/7512
## Summary of changes
- On non-zero shards, learn the GC offset from shard 0's index instead
of calculating it.
- Add a test `test_sharding_gc` that exercises this
- Do GC in test_pg_regress as a general smoke test that GC functions run
(e.g. this would fail if we were using SLRUs we didn't have)
In this PR we are still ingesting SLRUs everywhere, but not using them
any more. Part 2 PR (https://github.com/neondatabase/neon/pull/9786)
makes the change to not store them at all.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
This test uses a gratuitous number of pageservers (16). This works fine
when there are plenty of system resources, but causes issues on test
runners that have limited resources and run many tests concurrently.
Related: https://github.com/neondatabase/neon/issues/9802
## Summary of changes
- Split from 2 shards to 4, instead of 4 to 8
- Don't give every shard a separate pageserver, let two locations share
each pageserver.
Net result is 4 pageservers instead of 16
## Problem
It is called context/ctx everywhere and the Monitoring suffix needlessly
confuses with proper monitoring code.
## Summary of changes
* Rename RequestMonitoring to RequestContext
* Rename RequestMonitoringInner to RequestContextInner
## Problem
I've noticed that we have 2 flaky tests which failed with error:
```
re.error: missing ), unterminated subpattern at position 21
```
- `test_timeline_archival_chaos` — has been already fixed
- `test_sharded_tad_interleaved_after_partial_success` — I didn't manage
to find the incorrect regex
[Internal link](https://neonprod.grafana.net/goto/yfmVHV7NR?orgId=1)
## Summary of changes
- Wrap `re.match` in `try..except` block and print incorrect regex
## Problem
We want to keep `#on-call-staging-stream` channel close to the prod one
and redirect notifications from failing benchmarks to another channel
for investigation.
## Summary of changes
- Send notifications regarding failures in `benchmarking` job to
`#on-call-staging-stream`
- Send notifications regarding failures in `periodic_pagebench` job to
`#on-call-staging-stream`
## Problem
Two recently observed log errors indicate safekeeper tasks for a
timeline running after that timeline's deletion has started.
- https://github.com/neondatabase/neon/issues/8972
- https://github.com/neondatabase/neon/issues/8974
These code paths do not have a mechanism that coordinates task shutdown
with the overall shutdown of the timeline.
## Summary of changes
- Add a `Gate` to `Timeline`
- Take the gate as part of resident timeline guard: any code that holds
a guard over a timeline staying resident should also hold a guard over
the timeline's total lifetime.
- Take the gate from the wal removal task
- Respect Timeline::cancel in WAL send/recv code, so that we do not
block shutdown indefinitely.
- Add a test that deletes timelines with open pageserver+compute
connections, to check these get torn down as expected.
There is some risk to introducing gates: if there is code holding a gate
which does not properly respect a cancellation token, it can cause
shutdown hangs. The risk of this for safekeepers is lower in practice
than it is for other services, because in a healthy timeline deletion,
the compute is shutdown first, then the timeline is deleted on the
pageserver, and finally it is deleted on the safekeepers -- that makes
it much less likely that some protocol handler will still be running.
Closes: #8972Closes: #8974
See https://github.com/neondatabase/cloud/issues/14378
In collaboration with @cloneable and @awarus, we sifted through logs and
simply demoted some logs to debug. This is not at all finished and there
are more logs to review, but we ran out of time in the session we
organised. In any slightly more nuanced cases, we didn't touch the log,
instead leaving a TODO comment.
In timeline preloading, we also do a preload for offloaded timelines.
This includes the download of `index-part.json`. Ultimately, such a
download is wasteful, therefore avoid it. Same goes for the remote
client, we just discard it immediately thereafter.
Part of #8088
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Before, compute_ctl didn't have a good registry for what command would
run when, depending exclusively on sync code to apply changes. When
users have many databases/roles to manage, this step can take a
substantial amount of time, breaking assumptions about low (re)start
times in other systems.
This commit reduces the time compute_ctl takes to restart when changes
must be applied, by making all commands more or less blind writes, and
applying these commands in an asynchronous context, only waiting for
completion once we know the commands have all been sent.
Additionally, this reduces time spent by batching per-database
operations where previously we would create a new SQL connection for
every user-database operation we planned to execute.
## Problem
We have a bunch of duplicated code for automated releases. There will be
even more, once we have `release-compute` branch
(https://github.com/neondatabase/neon/pull/9637).
Another issue with the current `release` workflow is that it creates a
PR from the main as is. If we create 2 different releases from the
same commit, GitHub could mix up results from different PRs.
## Summary of changes
- Create a reusable workflow for releases
- Create an empty commit to differentiate releases
part of https://github.com/neondatabase/neon/issues/9114, we want to be
able to run partial gc-compaction in tests. In the future, we can also
expand this functionality to legacy compaction, so that we can trigger
compaction for a specific key range.
## Summary of changes
* Support passing compaction key range through pageserver routes.
* Refactor input parameters of compact related function to take the new
`CompactOptions`.
* Add tests for partial compaction. Note that the test may or may not
trigger compaction based on GC horizon. We need to improve the test case
to ensure things always get below the gc_horizon and the gc-compaction
can be triggered.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
close https://github.com/neondatabase/neon/issues/9730
The test case tests if anything goes wrong during pageserver restart +
*during timeline creation not complete*. Therefore, queue is stopped
error is normal in this case, except that it should be categorized as a
shutdown error instead of a real error.
## Summary of changes
* More comments for the test case.
* Queue stopped error will now be forwarded as
CreateTimelineError::ShuttingDown.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
The community decided to make a new off-schedule release due to ABI
breakage in last week's release. We're not affected by the ABI
breakage because we rebuild all extensions in our docker images, but
let's stay up-to-date. There were a few other fixes in the release
too.
Currently, local_proxy will write an error log if it doesn't find the
config file. This is expected for startup, so it's just noise. It is an
error if we do receive an explicit SIGHUP though.
I've also demoted the build info logs to be debug level. We don't need
them in the compute image since we have other ways to determine what
code is running.
Lastly, I've demoted SIGHUP signal handling from warn to info, since
it's not really a warning event.
See https://github.com/neondatabase/cloud/issues/10880 for more details
## Problem
The first version of the ingest benchmark had some parsing and reporting
logic in shell script inside GitHub workflow.
it is better to move that logic into a python testcase so that we can
also run it locally.
## Summary of changes
- Create new python testcase
- invoke pgcopydb inside python test case
- move the following logic into python testcase
- determine backpressure
- invoke pgcopydb and report its progress
- parse pgcopydb log and extract metrics
- insert metrics into perf test database
- add additional column to perf test database that can receive endpoint
ID used for pgcopydb run to have it available in grafana dashboard when
retrieving other metrics for an endpoint
## Example run
https://github.com/neondatabase/neon/actions/runs/11860622170/job/33056264386
Earlier work (#7547) has made the scrubber internally generic, but one
could only configure it to use S3 storage.
This is the final piece to make (most of, snapshotting still requires
S3) the scrubber be able to be configured via GenericRemoteStorage.
I.e. you can now set an env var like:
```
REMOTE_STORAGE_CONFIG='remote_storage = { bucket_name = "neon-dev-safekeeper-us-east-2d", bucket_region = "us-east-2" }
```
and the scrubber will read it instead.
There is a potential data corruption issue, not one I've encountered,
but it's still not hard to hit with some correct looking code given our
current architecture. It has to do with the timeline's memory object storage
via reference counted `Arc`s, and the removal of `retain_lsn` entries at
the drop of the last `Arc` reference.
The corruption steps are as follows:
1. timeline gets offloaded. timeline object A doesn't get dropped
though, because some long-running task accesses it
2. the same timeline gets unoffloaded again. timeline object B gets
created for it, timeline object A still referenced. both point to the
same timeline.
3. the task keeping the reference to timeline object A exits. destructor
for object A runs, removing `retain_lsn` in the timeline's parent.
4. the timeline's parent runs gc without the `retain_lsn` of the still
exant timleine's child, leading to data corruption.
In general we are susceptible each time when we recreate a `Timeline`
object in the same process, which happens both during a timeline
offload/unoffload cycle, as well as during an ancestor detach operation.
The solution this PR implements is to make the destructor for a timeline
as well as an offloaded timeline remove at most one `retain_lsn`.
PR #9760 has added a log line to print the refcounts at timeline
offload, but this only detects one of the places where we do such a
recycle operation. Plus it doesn't prevent the actual issue.
I doubt that this occurs in practice. It is more a defense in depth measure.
Usually I'd assume that the timeline gets dropped immediately in step 1,
as there is no background tasks referencing it after its shutdown.
But one never knows, and reducing the stakes of step 1 actually occurring
is a really good idea, from potential data corruption to waste of CPU time.
Part of #8088
## Problem
We don't take advantage of queue depth generated by the compute
on the pageserver. We can process getpage requests more efficiently
by batching them.
## Summary of changes
Batch up incoming getpage requests that arrive within a configurable
time window (`server_side_batch_timeout`).
Then process the entire batch via one `get_vectored` timeline operation.
By default, no merging takes place.
## Testing
* **Functional**: https://github.com/neondatabase/neon/pull/9792
* **Performance**: will be done in staging/pre-prod
# Refs
* https://github.com/neondatabase/neon/issues/9377
* https://github.com/neondatabase/neon/issues/9376
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Tests that are marked with `run_only_on_default_postgres` do not run on
debug builds on CI because we run debug builds only for the latest
Postgres version (which is 17)
## Summary of changes
- Bump `PgVersion.DEFAULT` to `v17`
- Skip `test_timeline_archival_chaos` in debug builds
## Problem
We call `check-build-tools-image` twice for each workflow whenever we
use it, along with `build-build-tools-image`, once as a workflow itself,
and the second time from `build-build-tools-image`. This is not
necessary.
## Summary of changes
- Inline `check-build-tools-image` into `build-build-tools-image`
- Remove separate `check-build-tools-image` workflow
## Problem
Due to #9471 , the scale test occasionally gets 404s while trying to
modify the config of a timeline that belongs to a tenant being migrated.
We rarely see this narrow race in the field, but the test is quite good
at reproducing it.
## Summary of changes
- Ignore 404 errors in this test.
## Problem
See https://github.com/neondatabase/neon/issues/7750
test_wal_restore.sh is copying file to current working directory which
can cause interfere of test_wa_restore.py tests spawned of different
configurations.
## Summary of changes
Copy file to $DATA_DIR
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
The Postgres version was updated. The patch has to be updated
accordingly.
## Summary of changes
The patch of the regression test was updated.
## Problem
`no_sync` initially just skipped syncfs on startup (#9677). I'm also
interested in flaky tests that time out during pageserver shutdown while
flushing l0s, so to eliminate disk throughput as a source of issues
there,
## Summary of changes
- Drive-by change for test timeouts: add a couple more ::info logs
during pageserver startup so it's obvious which part got stuck.
- Add a SyncMode enum to configure VirtualFile and respect it in
sync_all and sync_data functions
- During pageserver startup, set SyncMode according to `no_sync`
## Problem
When processing pipelined `AppendRequest`s, we explicitly flush the WAL
every second and return an `AppendResponse`. However, the WAL is also
implicitly flushed on segment bounds, but this does not result in an
`AppendResponse`. Because of this, concurrent transactions may take up
to 1 second to commit and writes may take up to 1 second before sending
to the pageserver.
## Summary of changes
Advance `flush_lsn` when a WAL segment is closed and flushed, and emit
an `AppendResponse`. To accommodate this, track the `flush_lsn` in
addition to the `flush_record_lsn`.
## Problem
It turns out that `WalStreamDecoder::poll_decode` returns the start LSN
of the next record and not the end LSN of the current record. They are
not always equal. For example, they're not equal when the record in
question is an XLOG SWITCH record.
## Summary of changes
Rename things to reflect that.
In ea32f1d0a3, Matthias added a feature to
our extension to expose more granular wait events. However, due to the
typo, those wait events were never registered, so we used the more
generic wait events instead.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We want to serialize interpreted records to send them over the wire from
safekeeper to pageserver.
## Summary of changes
Make `InterpretedWalRecord` ser/de. This is a temporary change to get
the bulk of the lift merged in
https://github.com/neondatabase/neon/pull/9746. For going to prod, we
don't want to use bincode since we can't evolve the schema.
Questions on serialization will be tackled separately.
PR #9308 has modified tenant activation code to take offloaded child
timelines into account for populating the list of `retain_lsn` values.
However, there is more places than just tenant activation where one
needs to update the `retain_lsn`s.
This PR fixes some bugs of the current code that could lead to
corruption in the worst case:
1. Deleting of an offloaded timeline would not get its `retain_lsn`
purged from its parent. With the patch we now do it, but as the parent
can be offloaded as well, the situatoin is a bit trickier than for
non-offloaded timelines which can just keep a pointer to their parent.
Here we can't keep a pointer because the parent might get offloaded,
then unoffloaded again, creating a dangling pointer situation. Keeping a
pointer to the *tenant* is not good either, because we might drop the
offloaded timeline in a context where a `offloaded_timelines` lock is
already held: so we don't want to acquire a lock in the drop code of
OffloadedTimeline.
2. Unoffloading a timeline would not get its `retain_lsn` values
populated, leading to it maybe garbage collecting values that its
children might need. We now call `initialize_gc_info` on the parent.
3. Offloading of a timeline would not get its `retain_lsn` values
registered as offloaded at the parent. So if we drop the `Timeline`
object, and its registration is removed, the parent would not have any
of the child's `retain_lsn`s around. Also, before, the `Timeline` object
would delete anything related to its timeline ID, now it only deletes
`retain_lsn`s that have `MaybeOffloaded::No` set.
Incorporates Chi's reproducer from #9753. cc
https://github.com/neondatabase/cloud/issues/20199
The `test_timeline_retain_lsn` test is extended:
1. it gains a new dimension, duplicating each mode, to either have the
"main" branch be the direct parent of the timeline we archive, or the
"test_archived_parent" branch intermediary, creating a three timeline
structure. This doesn't test anything fixed by this PR in particular,
just explores the vast space of possible configurations a little bit
more.
2. it gains two new modes, `offload-parent`, which tests the second
point, and `offload-no-restart` which tests the third point.
It's easy to verify the test actually is "sharp" by removing one of the
respective `self.initialize_gc_info()`, `gc_info.insert_child()` or
`ancestor_children.push()`.
Part of #8088
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Alex Chi Z <chi@neon.tech>
#9764, which adds profiling support to Safekeeper, pulls in the
dependency [`inferno`](https://crates.io/crates/inferno) via
[`pprof-rs`](https://crates.io/crates/pprof). This is licenced under the
[Common Development and Distribution License
1.0](https://spdx.org/licenses/CDDL-1.0.html), which is not allowed by
`cargo-deny`.
This patch allows the CDDL-1.0 license. It is a derivative of the
Mozilla Public License, which we already allow, but avoids some issues
around European copyright law that the MPL had. As such, I don't expect
this to be problematic.
## Problem
We didn't have a neat way to prevent auto-splitting of tenants. This
could be useful during incidents or for testing.
Closes https://github.com/neondatabase/neon/issues/9332
## Summary of changes
- Filter splitting candidates by scheduling policy
Analysis of the LR benchmarking tests indicates that in the duration of
test_subscriber_lag, a leftover 'slotter' replication slot can lead to
retained WAL growing on the publisher. This replication slot is not used
by any subscriber. The only purpose of the slot is to generate snapshot
files for the puspose of test_snap_files.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
After investigation, we think to make `test_readonly_node_gc` less
flaky, we need to make a proper fix (likely involving persisting part of
the lease state). See https://github.com/neondatabase/neon/issues/9754
for details.
## Summary of changes
- skip the test until proper fix.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
https://github.com/neondatabase/neon/issues/9240
## Summary of changes
Correctly truncate VM page instead just replacing it with zero page.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
We are pining our fork of rust-postgres to a commit hash and that
prevents us from making
further changes to it. The latest commit in rust-postgres requires
https://github.com/neondatabase/neon/pull/8747,
but that seems to have gone stale. I reverted rust-postgres `neon`
branch to the pinned commit in
https://github.com/neondatabase/rust-postgres/pull/31.
## Summary of changes
Switch back to using the `neon` branch of the rust-postgres fork.
If WAL truncation fails in the middle it might leave some data on disk
above the write/flush LSN. In theory, concatenated with previous records
it might form bogus WAL (though very unlikely in practice because CRC
would protect from that). To protect from that, set
pending_wal_truncation flag: means before any WAL writes truncation must
be retried until it succeeds. We already did that in case of safekeeper
restart, now extend this mechanism for failures without restart. Also,
importantly, reset LSNs in the beginning of the operation, not in the
end, because once on disk deletion starts previous pointers are wrong.
All this most likely haven't created any problems in practice because
CRC protects from the consequences.
Tests for this are hard; simulation infrastructure might be useful here
in the future, but not yet.
## Problem
Historically, if a control component passed a pageserver "generation: 1"
this could be a quick way to corrupt a tenant by loading a historic
index.
Follows https://github.com/neondatabase/neon/pull/9383Closes#6951
## Summary of changes
- Introduce a Fatal variant to DownloadError, to enable index downloads
to signal when they have encountered a scary enough situation that we
shouldn't proceed to load the tenant.
- Handle this variant by putting the tenant into a broken state (no
matter which timeline within the tenant reported it)
- Add a test for this case
In the event that this behavior fires when we don't want it to, we have
ways to intervene:
- "Touch" an affected index to update its mtime (download+upload S3
object)
- If this behavior is triggered, it indicates we're attaching in some
old generation, so we should be able to fix that by manually bumping
generation numbers in the storage controller database (this should never
happen, but it's an option if it does)
and add /metrics endpoint to compute_ctl to expose such metrics
metric format example for extension pg_rag
with versions 1.2.3 and 1.4.2
installed in 3 and 1 databases respectively:
neon_extensions_installed{extension="pg_rag", version="1.2.3"} = 3
neon_extensions_installed{extension="pg_rag", version="1.4.2"} = 1
------
infra part: https://github.com/neondatabase/flux-fleet/pull/251
---------
Co-authored-by: Tristan Partin <tristan@neon.tech>
## Problem
Followup to https://github.com/neondatabase/neon/pull/9677 which enables
`no_sync` in tests. This can be merged once the next release has
happened.
## Summary of changes
- Always run pageserver with `no_sync = true` in tests.
psycopg2 has the following warning related to autocommit:
> By default, any query execution, including a simple SELECT will start
> a transaction: for long-running programs, if no further action is
> taken, the session will remain “idle in transaction”, an undesirable
> condition for several reasons (locks are held by the session, tables
> bloat…). For long lived scripts, either ensure to terminate a
> transaction as soon as possible or use an autocommit connection.
In the 2.9 release notes, psycopg2 also made the following change:
> `with connection` starts a transaction on autocommit transactions too
Some of these connections are indeed long-lived, so we were retaining
tons of WAL on the endpoints because we had a transaction pinned in the
past.
Link: https://www.psycopg.org/docs/news.html#what-s-new-in-psycopg-2-9
Link: https://github.com/psycopg/psycopg2/issues/941
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
`TimelinePersistentState::empty()`, used for tests and benchmarks, had a
hardcoded 16 MB WAL segment size. This caused confusion when attempting
to change the global segment size.
## Summary of changes
Inherit from `WAL_SEGMENT_SIZE` in `TimelinePersistentState::empty()`.
This GUC will drop replication slots if the size of the
pg_logical/snapshots directory (not including temp snapshot files)
becomes larger than the specified size. Keeping the size of this
directory smaller will help with basebackup size from the pageserver.
Part-of: https://github.com/neondatabase/neon/issues/8619
Signed-off-by: Tristan Partin <tristan@neon.tech>
The original value that we get is measured in microseconds. It comes
from a calculation using Postgres' GetCurrentTimestamp(), whihc is
implemented in terms of gettimeofday(2).
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
WAL segment fsyncs significantly affect WAL ingestion throughput.
`durable_rename()` is used when initializing every 16 MB segment, and
issues 3 fsyncs of which 1 was unnecessary.
## Summary of changes
Remove an fsync in `durable_rename` which is unnecessary with Linux and
ext4 (which we currently use). This improves WAL ingestion throughput by
up to 23% with large appends on my MacBook.
I had an impression that gc-compaction didn't test the case where the
first record of the key history is will_init because of there are some
code path that will panic in this case. Luckily it got fixed in
https://github.com/neondatabase/neon/pull/9026 so we can now implement
such tests.
Part of https://github.com/neondatabase/neon/issues/9114
## Summary of changes
* Randomly changed some images into will_init neon wal record
* Split `test_simple_bottom_most_compaction_deltas` into two test cases,
one of them has the bottom layer as delta layer with will_init flags,
while the other is the original one with image layers.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The control file is flushed on the WAL ingest path when the commit LSN
advances by one segment, to bound the amount of recovery work in case of
a crash. This involves 3 additional fsyncs, which can have a significant
impact on WAL ingest throughput. This is to some extent mitigated by
`AppendResponse` not being emitted on segment bound flushes, since this
will prevent commit LSN advancement, which will be addressed separately.
## Summary of changes
Don't flush the control file on the WAL ingest path at all. Instead,
leave that responsibility to the timeline manager, but ask it to flush
eagerly if the control file lags the in-memory commit LSN by more than
one segment. This should not cause more than `REFRESH_INTERVAL` (300 ms)
additional latency before flushing the control file, which is
negligible.
Add a test that ensures the `retain_lsn` functionality works. Right now,
there is not a single test that is broken if offloaded or non-offloaded
timelines don't get registered at their parents, preventing gc from
discarding the ancestor_lsns of the children. This PR fills that gap.
The test has four modes:
* `offloaded`: offload the child timeline, run compaction on the parent
timeline, unarchive the child timeline, then try reading from it.
hopefully the data is still there.
* `offloaded-corrupted`: offload the child timeline, corrupts the
manifest in a way that the pageserver believes the timeline was
flattened. This is the closest we can get to pretend the `retain_lsn`
mechanism doesn't exist for offloaded timelines, so we can avoid adding
endpoints to the pageserver that do this manually for tests. The test
then checks that indeed data is corrupted and the endpoint can't be
started. That way we know that the test is actually working, and
actually tests the `retain_lsn` mechanism, instead of say the lsn lease
mechanism, or one of the many other mechanisms that impede gc.
* `archived`: the child timeline gets archived but doesn't get
offloaded. this currently matches the `None` case but we might have
refactors in the future that make archived timelines sufficiently
different from non-archived ones.
* `None`: the child timeline doesn't even get archived. this tests that
normal timelines participate in `retain_lsn`. I've made them locally not
participate in `retain_lsn` (via commenting out the respective
`ancestor_children.push` statement in tenant.rs) and ran the testsuite,
and not a single test failed. So this test is first of its kind.
Part of #8088.
This exporter logs an ERROR if a file called `postgres_exporter.yml` is
not located in its current working directory. We can silence it by
adding an empty config file and pointing the exporter at it.
Signed-off-by: Tristan Partin <tristan@neon.tech>
We found that exporting GH Workflow Runs in batch is more efficient due
to
- better utilisation of Github API
- and gh runners usage is rounded to minutes, so even when ad-hoc export
is done in 5-10 seconds, we billed for one minute usage
So now we introduce batch exporting, with version v0.2.x of github
workflow stats exporter.
How it's expected to work now:
- every 15 minutes we query for the workflow runs, created in last 2
hours
- to avoid missing workflows that ran for more than 2 hours, every night
(00:25) we will query workflows created in past 24 hours and export them
as well
- should we have query for even longer periods?
- lets see how it works with current schedule
- for longer periods like for days or weeks, it may require to adjust
logic and concurrency of querying data, so lets for now use simpler
version
The final patch for partial compaction, part of
https://github.com/neondatabase/neon/issues/9114, close
https://github.com/neondatabase/neon/issues/8921 (note that we didn't
implement parallel compaction or compaction scheduler for partial
compaction -- currently this needs to be scheduled by using a Python
script to split the keyspace, and in the future, automatically split
based on the key partitioning when the pageserver wants to trigger a
gc-compaction)
## Summary of changes
* Update the layer selection algorithm to use the same selection as full
compaction (everything intersect/below gc horizon)
* Update the layer selection algorithm to also generate a list of delta
layers that need to be rewritten
* Add the logic to rewrite delta layers and add them back to the layer
map
* Update test case to do partial compaction on deltas
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Removes some unnecessary initdb arguments, and fixes Neon for MacOS
since it doesn't seem to ship a C.UTF-8 locale.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Removes some unnecessary initdb arguments, and fixes Neon for MacOS
since it doesn't seem to ship a C.UTF-8 locale.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
Running `pytest.skip(...)` in a test body instead of marking the test
with `@pytest.mark.skipif(...)` makes all fixtures to be initialised,
which is not necessary if the test is going to be skipped anyway.
Also, some tests are unnecessarily skipped (e.g. `test_layer_bloating`
on Postgres 17, or `test_idle_reconnections` at all) or run (e.g.
`test_parse_project_git_version_output_positive` more than on once
configuration) according to comments.
## Summary of changes
- Move `skip_on_postgres` / `xfail_on_postgres` /
`run_only_on_default_postgres` decorators to `fixture.utils`
- Add new `skip_in_debug_build` and `skip_on_ci` decorators
- Replace `pytest.skip(...)` calls with decorators where possible
## Problem
We have no specific benchmark testing project migration of postgresql
project with existing data into Neon.
Typical steps of such a project migration are
- schema creation in the neon project
- initial COPY of relations
- creation of indexes and constraints
- vacuum analyze
## Summary of changes
Add a periodic benchmark running 9 AM UTC every day.
In each run:
- copy a 200 GiB project that has realistic schema, data, tables,
indexes and constraints from another project into
- a new Neon project (7 CU fixed)
- an existing tenant, (but new branch and new database) that already has
4 TiB of data
- use pgcopydb tool to automate all steps and parallelize COPY and index
creation
- parse pgcopydb output and report performance metrics in Neon
performance test database
## Logs
This benchmark has been tested first manually and then as part of
benchmarking.yml workflow, example run see
https://github.com/neondatabase/neon/actions/runs/11757679870
## Problem
Once we enable the merge queue for the `main` branch, it won't be
possible to adjust the commit message right after pressing the "Squash
and merge" button and the PR title + description will be used as is.
To avoid extra noise in the commits in the `main` with the checklist
leftovers, I propose removing the checklist from the PR template and
keeping only the Problem / Summary of changes.
## Summary of changes
- Remove the checklist from the PR template
## Problem
We don't have a metric capturing the latency of segment initialization.
This can be significant due to fsyncs.
## Summary of changes
Add an `initialize_segment` variant of
`safekeeper_wal_storage_operation_seconds`.
Perf benchmarks produce a lot of layers.
## Summary of changes
Bumping the threshold and ignore the warning.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Perf benchmarks produce a lot of layers.
## Summary of changes
Bumping the threshold and ignore the warning.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
GitHub API can return error 500, and it fails jobs that use
`actions/github-script` action.
## Summary of changes
- Add `retry: 500` to all `actions/github-script` usage
## Problem
We wish to stop using admin tokens in the infra repo, but step down
requests use the admin token.
## Summary of Changes
Introduce a new "ControllerPeer" scope and use it for step-down requests.
## Problem
The Merge queue doesn't work because it expects certain jobs, which we
don't have in the `pre-merge-checks` workflow.
But it turns out we can just create jobs/checks with the same names in
any workflow that we run.
## Summary of changes
- Add `conclusion` jobs
- Create `neon-cloud-e2e` status check
- Add a bunch of `if`s to handle cases with no relevant changes found
and prepare the workflow to run rust checks in the future
- List the workflow in `report-workflow-stats` to collect stats about it
It is possible at the point we shutdown the timeline, there are
still layer files we did not upload.
## Summary of changes
* If the queue is not empty, avoid offloading.
* Shutdown the timeline gracefully using the flush mode to
ensure all local files are uploaded before deleting the timeline
directory.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
We saw pageserver OOMs
https://github.com/neondatabase/cloud/issues/19715 for tenants doing
large writes. Add log lines around in-memory layers to hopefully collect
some info during my on-call shift next week.
## Summary of changes
* Estimate in-memory size of an in-mem layer.
* Print frozen layer number if there are too many layers accumulated in
memory.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Right now, our environments create databases with the C locale, which is
really unfortunate for users who have data stored in other languages
that they want to analyze. For instance, show_trgm on Hebrew text
currently doesn't work in staging or production.
I don't envision this being the final solution. I think this is just a
way to set a known value so the pageserver doesn't use its parent
environment. The final solution to me is exposing initdb parameters to
users in the console. Then they could use a different locale or encoding
if they so chose.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
To prevent breaking main after Python 3.11 PR get merged
we need to enable merge queue and run `check-codestyle-python`
job on it
## Summary of changes
- Move `check-codestyle-python` to a reusable workflow
- Run this workflow on `merge_group` event
In INC-317
https://neondb.slack.com/archives/C033RQ5SPDH/p1730815677932209, we saw
an interesting series of operations that would remove valid layer files
existing in the layer map.
* Timeline A starts compaction and generates an image layer Z but not
uploading it yet.
* Timeline B/C starts ancestor detaching (which should not affect
timeline A)
* The tenant gets restarted as part of the ancestor detaching process,
without increasing the generation number.
* Timeline A reloads, discovering the layer Z is a future layer, and
schedules a **deletion into the deletion queue**. This means that the
file will be deleted any time in the future.
* Timeline A starts compaction and generates layer Z again, adding it to
the layer map. Note that because we don't bump generation number during
ancestor detach, it has the same filename + generation number as the
original Z.
* Timeline A deletes layer Z from s3 + disk, and now we have a dangling
reference in the layer map, blocking all
compaction/logical_size_calculation process.
## Summary of changes
* We wait until all layers to be uploaded before shutting down the
tenants in `Flush` mode.
* Ancestor detach restarts now use this mode.
* Ancestor detach also waits for remote queue completion before starting
the detaching process.
* The patch ensures that we don't have any future image layer (or
something similar) after restart, but not fixing the underlying problem
around generation numbers.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Replication slots are now persisted using AUX files mechanism and
included in basebackup when replica is launched.
This slots are not somehow used at replica but hold WAL, which may cause
local disk space exhaustion.
## Summary of changes
Add `--replica` parameter to basebackup request and do not include
replication slot state files in basebackup for replica.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
In test environments, the `syncfs` that the pageserver does on startup
can take a long time, as other tests running concurrently might have
many gigabytes of dirty pages.
## Summary of changes
- Add a `no_sync` option to the pageserver's config.
- Skip syncfs on startup if this is set
- A subsequent PR (https://github.com/neondatabase/neon/pull/9678) will
enable this by default in tests. We need to wait until after the next
release to avoid breaking compat tests, which would fail if we set
no_sync & use an old pageserver binary.
Q: Why is this a different mechanism than safekeeper, which as a
--no-sync CLI?
A: Because the way we manage pageservers in neon_local depends on the
pageserver.toml containing the full configuration, whereas safekeepers
have a config file which is neon-local-specific and can drive a CLI
flag.
Q: Why is the option no_sync rather than sync?
A: For boolean configs with a dangerous value, it's preferable to make
"false" the safe option, so that any downstream future config tooling
that might have a "booleans are false by default" behavior (e.g. golang
structs) is safe by default.
Q: Why only skip the syncfs, and not all fsyncs?
A: Skipping all fsyncs would require more code changes, and the most
acute problem isn't fsyncs themselves (these just slow down a running
test), it's the syncfs (which makes a pageserver startup slow as a
result of _other_ tests)
set-docker-config-dir was replicated over multiple repositories.
The replica of this action was removed from this repository and it's
using the version from github.com/neondatabase/dev-actions instead
Compiling with nightly rust compiler, I'm getting a lot of errors like
this:
error: `if let` assigns a shorter lifetime since Edition 2024
--> proxy/src/auth/backend/jwt.rs:226:16
|
226 | if let Some(permit) = self.try_acquire_permit() {
| ^^^^^^^^^^^^^^^^^^^-------------------------
| |
| this value has a significant drop implementation which may observe a
major change in drop order and requires your discretion
|
= warning: this changes meaning in Rust 2024
= note: for more information, see issue #124085
<https://github.com/rust-lang/rust/issues/124085>
help: the value is now dropped here in Edition 2024
--> proxy/src/auth/backend/jwt.rs:241:13
|
241 | } else {
| ^
note: the lint level is defined here
--> proxy/src/lib.rs:8:5
|
8 | rust_2024_compatibility
| ^^^^^^^^^^^^^^^^^^^^^^^
= note: `#[deny(if_let_rescope)]` implied by
`#[deny(rust_2024_compatibility)]`
and this:
error: these values and local bindings have significant drop
implementation that will have a different drop order from that of
Edition 2021
--> proxy/src/auth/backend/jwt.rs:376:18
|
369 | let client = Client::builder()
| ------ these values have significant drop implementation and will
observe changes in drop order under Edition 2024
...
376 | map: DashMap::default(),
| ^^^^^^^^^^^^^^^^^^
|
= warning: this changes meaning in Rust 2024
= note: for more information, see issue #123739
<https://github.com/rust-lang/rust/issues/123739>
= note: `#[deny(tail_expr_drop_order)]` implied by
`#[deny(rust_2024_compatibility)]`
They are caused by the `rust_2024_compatibility` lint option.
When we actually switch to the 2024 edition, it makes sense to go
through all these and check that the drop order changes don't break
anything, but in the meanwhile, there's no easy way to avoid these
errors. Disable it, to allow compiling with nightly again.
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
build-tools image does not provide superuser, so additional packages can
not be installed during GitHub benchmarking workflows but need to be
added to the image
## Summary of changes
install pgcopydb version 0.17-1 or higher into build-tools bookworm
image
```bash
docker run -it neondatabase/build-tools:<tag>-bookworm-arm64 /bin/bash
...
nonroot@c23c6f4901ce:~$ LD_LIBRARY_PATH=/pgcopydb/lib /pgcopydb/bin/pgcopydb --version;
13:58:19.768 8 INFO Running pgcopydb version 0.17 from "/pgcopydb/bin/pgcopydb"
pgcopydb version 0.17
compiled with PostgreSQL 16.4 (Debian 16.4-1.pgdg120+2) on aarch64-unknown-linux-gnu, compiled by gcc (Debian 12.2.0-14) 12.2.0, 64-bit
compatible with Postgres 11, 12, 13, 14, 15, and 16
```
Example usage of that image in a workflow
https://github.com/neondatabase/neon/actions/runs/11725718371/job/32662681172#step:7:14
While setting up some tests, I noticed that we didn't support keycloak.
They make use of encryption JWKs as well as signature ones. Our current
jwks crate does not support parsing encryption keys which caused the
entire jwk set to fail to parse. Switching to lazy parsing fixes this.
Also while setting up tests, I couldn't use localhost jwks server as we
require HTTPS and we were using webpki so it was impossible to add a
custom CA. Enabling native roots addresses this possibility.
I saw some of our current e2e tests against our custom JWKS in s3 were
taking a while to fetch. I've added a timeout + retries to address this.
ref https://github.com/neondatabase/neon/issues/9441
The metrics from LR publisher testing project: ~300KB aux key deltas per
256MB files. Therefore, I think we can do compaction more aggressively
as these deltas are small and compaction can reduce layer download
latency. We also have a read path perf fix
https://github.com/neondatabase/neon/pull/9631 but I'd still combine the
read path fix with the reduce of the compaction threshold.
## Summary of changes
* reduce metadata compaction threshold
* use num of L1 delta layers as an indicator for metadata compaction
* dump more logs
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
When we create a new segment, we zero it out in order to avoid changing
the length and fsyncing metadata on every write. However, we zeroed it
out by writing 8 KB zero-pages, and Tokio file writes have non-trivial
overhead.
## Summary of changes
Zero out the segment using
[`File::set_len()`](https://docs.rs/tokio/latest/i686-unknown-linux-gnu/tokio/fs/struct.File.html#method.set_len)
instead. This will typically (depending on the filesystem) just write a
sparse file and omit the 16 MB of data entirely. This improves WAL
append throughput for large messages by over 400% with fsync disabled,
and 100% with fsync enabled.
## Problem
We don't have any benchmarks for Safekeeper WAL ingestion.
## Summary of changes
Add some basic benchmarks for WAL ingestion, specifically for
`SafeKeeper::process_msg()` (single append) and `WalAcceptor` (pipelined
batch ingestion). Also add some baseline file write benchmarks.
Fix direct reading from WAL buffers.
Pointer wasn't advanced which resulted in sending corrupted WAL if part
of read used WAL buffers and part read from the file. Also move it to
neon_walreader so that e.g. replication could also make use of it.
ref https://github.com/neondatabase/cloud/issues/19567
## Problem
Benchmarks need more control over the WAL generated by `WalGenerator`.
In particular, they need to vary the size of logical messages.
## Summary of changes
* Make `WalGenerator` generic over `RecordGenerator`, which constructs
WAL records.
* Add `LogicalMessageGenerator` which emits logical messages, with a
configurable payload.
* Minor tweaks and code reorganization.
There are no changes to the core logic or emitted WAL.
We need to use the shard associated with the layer file, not the shard
associated with our current tenant shard ID.
Due to shard splits, the shard IDs can refer to older files.
close https://github.com/neondatabase/neon/issues/9667
Fixes#9518.
## Problem
After removing the assertion `layers_removed == 0` in #9506, we could
miss breakage if we solely rely on the successful execution of the
`SELECT` query to check if lease is properly protecting layers. Details
listed in #9518.
Also, in integration tests, we sometimes run into the race condition
where getpage request comes before the lease get renewed (item 2 of
#8817), even if compute_ctl sends a lease renewal as soon as it sees a
`/configure` API calls that updates the `pageserver_connstr`. In this
case, we would observe a getpage request error stating that we `tried to
request a page version that was garbage collected` (as we seen in
[Allure
Report](https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8613/11550393107/index.html#suites/3ccffb1d100105b98aed3dc19b717917/d1a1ba47bc180493)).
## Summary of changes
- Use layer map dump to verify if the lease protects what it claimed:
Record all historical layers that has `start_lsn <= lease_lsn` before
and after running timeline gc. This is the same check as
ad79f42460/pageserver/src/tenant/timeline.rs (L5025-L5027)
The set recorded after GC should contain every layer in the set recorded
before GC.
- Wait until log contains another successful lease request before
running the `SELECT` query after GC. We argued in #8817 that the bad
request can only exist within a short period after migration/restart,
and our test shows that as long as a lease renewal is done before the
first getpage request sent after reconfiguration, we will not have bad
request.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
In https://github.com/neondatabase/neon/issues/9441, the tenant has a
lot of aux keys spread in multiple aux files. The perf tool shows that a
significant amount of time is spent on remove_overlapping_keys. For
sparse keyspaces, we don't need to report missing key errors anyways,
and it's very likely that we will need to read all layers intersecting
with the key range. Therefore, this patch adds a new fast path for
sparse keyspace reads that we do not track `unmapped_keyspace` in a
fine-grained way. We only modify it when we find an image layer.
In debug mode, it was ~5min to read the aux files for a dump of the
tenant, and now it's only 8s, that's a 60x speedup.
## Summary of changes
* Do not add sparse keys into `keys_done` so that remove_overlapping
does nothing.
* Allow `ValueReconstructSituation::Complete` to be updated again in
`ValuesReconstructState::update_key` for sparse keyspaces.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
I think I meant to make these changes over 6 months ago. alas, better
late than never.
1. should_reject doesn't eagerly intern the endpoint string
2. Rate limiter uses a std Mutex instead of a tokio Mutex.
3. Recently I introduced a `-local-proxy` endpoint suffix. I forgot to
add this to normalize.
4. Random but a small cleanup making the ControlPlaneEvent deser
directly to the interned strings.
## Problem
Pinning a tenant by setting Pause scheduling policy doesn't work because
drain/fill code moves the tenant around during deploys.
Closes: https://github.com/neondatabase/neon/issues/9612
## Summary of changes
- In drain, only move a tenant if it is in Active or Essential mode
- In fill, only move a tenant if it is in Active mode.
The asymmetry is a bit annoying, but it faithfully respects the purposes
of the modes: Essential is meant to endeavor to keep the tenant
available, which means it needs to be drained but doesn't need to be
migrated during fills.
## Problem
https://github.com/neondatabase/neon/pull/9524 split the decoding and
interpretation step from ingestion.
The output of the first phase is a `wal_decoder::models::InterpretedWalRecord`.
Before this patch set that struct contained a list of `Value` instances.
We wish to lift the decoding and interpretation step to the safekeeper,
but it would be nice if the safekeeper gave us a batch containing the raw data instead of actual values.
## Summary of changes
Main goal here is to make `InterpretedWalRecord` hold a raw buffer which
contains pre-serialized Values.
For this we do:
1. Add a `SerializedValueBatch` type. This is `inmemory_layer::SerializedBatch` with some
extra functionality for extension, observing values for shard 0 and tests.
2. Replace `inmemory_layer::SerializedBatch` with `SerializedValueBatch`
3. Make `DatadirModification` maintain a `SerializedValueBatch`.
### `DatadirModification` changes
`DatadirModification` now maintains a `SerializedValueBatch` and extends
it as new WAL records come in (to avoid flushing to disk on every
record).
In turn, this cascaded into a number of modifications to
`DatadirModification`:
1. Replace `pending_data_pages` and `pending_zero_data_pages` with `pending_data_batch`.
2. Removal of `pending_zero_data_pages` and its cousin `on_wal_record_end`
3. Rename `pending_bytes` to `pending_metadata_bytes` since this is what it tracks now.
4. Adapting of various utility methods like `len`, `approx_pending_bytes` and `has_dirty_data_pages`.
Removal of `pending_zero_data_pages` and the optimisation associated
with it ((1) and (2)) deserves more detail.
Previously all zero data pages went through `pending_zero_data_pages`.
We wrote zero data pages when filling gaps caused by relation extension
(case A) and when handling special wal records (case B). If it happened
that the same WAL record contained a non zero write for an entry in
`pending_zero_data_pages` we skipped the zero write.
Case A: We handle this differently now. When ingesting the
`SerialiezdValueBatch` associated with one PG WAL record, we identify the gaps and fill the
them in one go. Essentially, we move from a per key process (gaps were filled after each
new key), and replace it with a per record process. Hence, the optimisation is not
required anymore.
Case B: When the handling of a special record needs to zero out a key,
it just adds that to the current batch. I inspected the code, and I
don't think the optimisation kicked in here.
The overall idea of the PR is to rename a few types to make their
purpose more clear, reduce abstraction where not needed, and move types
to to more better suited modules.
The PROXY Protocol V2 offers a "command" concept. It can be of two
different values. "Local" and "Proxy". The spec suggests that "Local" be
used for health-checks. We can thus use this to silence logging for such
health checks such as those from NLB.
This additionally refactors the flow to be a bit more type-safe, self
documenting and using zerocopy deser.
## Problem
While experimenting with `MAX_SEND_SIZE` for benchmarking, I saw stack
overflows when increasing it to 1 MB. Turns out a few buffers of this
size are stack-allocated rather than heap-allocated. Even at the default
128 KB size, that's a bit large to allocate on the stack.
## Summary of changes
Heap-allocate buffers of size `MAX_SEND_SIZE`.
Unify client, EndpointConnPool and DbUserConnPool for remote and local
conn.
- Use new ClientDataEnum for additional client data.
- Add ClientInnerCommon client structure.
- Remove Client and EndpointConnPool code from local_conn_pool.rs
## Problem
First issues noticed when trying to run scrubber find-garbage on Azure:
- Azure staging contains projects with -1 set for max_project_size:
apparently the control plane treats this as a signed field.
- Scrubber code assumed that listing projects should filter to
aws-$REGION. This is no longer needed (per comment in the code) because
we know hit region-local APIs.
This PR doesn't make it work all the way (`init_remote` still assumes
S3), but these are necessary precursors.
## Summary of changes
- Change max-project_size from unsigned to signed
- Remove region filtering in favor of simply using the right region's
API (which we already do)
Since 5f83c9290b482dc90006c400dfc68e85a17af785/#1504 we've had
duplication in construction of models::TenantConfig, where both
constructs contained the same code. This PR removes one of the two
locations to avoid the duplication.
## Problem
Tenant operations may return `409 Conflict` if the tenant is shutting
down. This status code is not retried by the control plane, causing
user-facing errors during pageserver restarts. Operations should instead
return `503 Service Unavailable`, which may be retried for idempotent
operations.
## Summary of changes
Convert
`GetActiveTenantError::WillNotBecomeActive(TenantState::Stopping)` to
`ApiError::ShuttingDown` rather than `ApiError::Conflict`. This error is
returned by `Tenant::wait_to_become_active` in most (all?)
tenant/timeline-related HTTP routes.
* Also rename `AuthFailed` variant to `PasswordFailed`.
* Before this all JWT errors end up in `AuthError::AuthFailed()`,
expects a username and also causes cache invalidation.
Problem
-------
Tests that directly call the Pageserver Management API to set tenant
config are flaky if the Pageserver is managed by Storcon because Storcon
is the source of truth and may (theoretically) reconcile a tenant at any
time.
Solution
--------
Switch all users of
`set_tenant_config`/`patch_tenant_config_client_side`
to use the `env.storage_controller.pageserver_api()`
Future Work
-----------
Prevent regressions from creeping in.
And generally clean up up tenant configuration.
Maybe we can avoid the Pageserver having a default tenant config at all
and put the default into Storcon instead?
* => https://github.com/neondatabase/neon/issues/9621
Refs
----
fixes https://github.com/neondatabase/neon/issues/9522
## Problem
We don't have any observability for Safekeeper WAL receiver queues.
## Summary of changes
Adds a few WAL receiver metrics:
* `safekeeper_wal_receivers`: gauge of currently connected WAL
receivers.
* `safekeeper_wal_receiver_queue_depth`: histogram of queue depths per
receiver, sampled every 5 seconds.
* `safekeeper_wal_receiver_queue_depth_total`: gauge of total queued
messages across all receivers.
* `safekeeper_wal_receiver_queue_size_total`: gauge of total queued
message sizes across all receivers.
There are already metrics for ingested WAL volume: `written_wal_bytes`
counter per timeline, and `safekeeper_write_wal_bytes` per-request
histogram.
AWS/azure private link shares extra information in the "TLV" values of
the proxy protocol v2 header. This code doesn't action on it, but it
parses it as appropriate.
It seems the ecosystem is not so keen on moving to aws-lc-rs as it's
build setup is more complicated than ring (requiring cmake).
Eventually I expect the ecosystem should pivot to
https://github.com/ctz/graviola/tree/main/rustls-graviola as it
stabilises (it has a very simply build step and license), but for now
let's try not have a headache of juggling two crypto libs.
I also noticed that tonic will just fail with tls without a default
provider, so I added some defensive code for that.
## Problem
In https://github.com/neondatabase/neon/pull/9589, timeline offload code
is modified to return an explicit error type rather than propagating
anyhow::Error. One of the 'Other' cases there is I/O errors from local
timeline deletion, which shouldn't need to exist, because our policy is
not to try and continue running if the local disk gives us errors.
## Summary of changes
- Make `delete_local_timeline_directory` and use `.fatal_err(` on I/O
errors
---------
Co-authored-by: Erik Grinaker <erik@neon.tech>
Adds a Python benchmark for sharded ingestion. This ingests 7 GB of WAL
(100M rows) into a Safekeeper and fans out to 10 shards running on 10
different pageservers. The ingest volume and duration is recorded.
## Problem
https://neondb.slack.com/archives/C04DGM6SMTM/p1727872045252899
See https://github.com/neondatabase/neon/issues/9240
## Summary of changes
Add `!page_is_new` check before assigning page lsn.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We may sometimes use scheduling modes like `Pause` to pin a tenant in
its current location for operational reasons. It is undesirable for the
chaos task to make any changes to such projects.
## Summary of changes
- Add a check for scheduling mode
- Add a log line when we do choose to do a chaos action for a tenant:
this will help us understand which operations originate from the chaos
task.
## Problem
We don't have any observability into full WalAcceptor queues per
timeline.
## Summary of changes
Logs a message when a WalAcceptor send has blocked for 5 seconds, and
another message when the send completes. This implies that the log
frequency is at most once every 5 seconds per timeline, so we don't need
further throttling.
## Problem
The IAM role associated with our github action runner supports a max
token expiration which is lower than the value we tried.
## Summary of changes
Since we believe to have understood the performance regression we (by
ensuring availability zone affinity of compute and pageserver) the job
should again run in lower than 5 hours and we revert this change instead
of increasing the max session token expiration in the IAM role which
would reduce our security.
## Problem
`tenant_get_shards()` does not work with a sharded tenant on 1
pageserver, as it assumes an unsharded tenant in this case. This special
case appears to have been added to handle e.g. `test_emergency_mode`,
where the storage controller is stopped. This breaks e.g. the sharded
ingest benchmark in #9591 when run with a single shard.
## Summary of changes
Correctly look up shards even with a single pageserver, but add a
special case that assumes an unsharded tenant if the storage controller
is stopped and the caller provides an explicit pageserver, in order to
accomodate `test_emergency_mode`.
## Problem
We wish for the deployment orchestrator to use infra scoped tokens,
but storcon endpoints it's using require admin scoped tokens.
## Summary of Changes
Switch over all endpoints that are used by the deployment orchestrator
to use an infra scoped token. This causes no breakage during mixed
version scenarios because admin scoped tokens allow access to all
endpoints. The deployment orchestrator can cut over to the infra token
after this commit touches down in prod.
Once this commit is released we should also update the tests code to use
infra scoped tokens where appropriate. Currently it would fail on the
[compat tests](9761b6a64e/test_runner/regress/test_storage_controller.py (L69-L71)).
## Problem
The final part of https://github.com/neondatabase/neon/issues/9543 will
be a chaos test that creates/deletes/archives/offloads timelines while
restarting pageservers and migrating tenants. Developing that test
showed up a few places where we log errors during normal shutdown.
## Summary of changes
- UninitializedTimeline's drop should log at info severity: this is a
normal code path when some part of timeline creation encounters a
cancellation `?` path.
- When offloading and finding a `RemoteTimelineClient` in a
non-initialized state, this is not an error and should not be logged as
such.
- The `offload_timeline` function returned an anyhow error, so callers
couldn't gracefully pick out cancellation errors from real errors:
update this to have a structured error type and use it throughout.
## Problem
clickbench regression causes clickbench to run >9 hours and the AWS
session token is expired before the run completes
## Summary of changes
extend lifetime of session token for this job to 12 hours
## Problem
Decoding and ingestion are still coupled in `pageserver::WalIngest`.
## Summary of changes
A new type is added to `wal_decoder::models`, InterpretedWalRecord. This
type contains everything that the pageserver requires in order to ingest
a WAL record. The highlights are the `metadata_record` which is an
optional special record type to be handled and `blocks` which stores
key, value pairs to be persisted to storage.
This type is produced by
`wal_decoder::models::InterpretedWalRecord::from_bytes` from a raw PG
wal record.
The rest of this commit separates decoding and interpretation of the PG
WAL record from its application in `WalIngest::ingest_record`.
Related: https://github.com/neondatabase/neon/issues/9335
Epic: https://github.com/neondatabase/neon/issues/9329
If we delete a timeline that has childen, those children will have their
data corrupted. Therefore, extend the already existing safety check to
offloaded timelines as well.
Part of #8088
In https://github.com/neondatabase/neon/issues/9032, I would like to
eventually add a `generation` field to the consumption metrics cache.
The current encoding is not backward compatible and it is hard to add
another field into the cache. Therefore, this patch refactors the format
to store "field -> value", and it's easier to maintain backward/forward
compatibility with this new format.
## Summary of changes
* Add `NewRawMetric` as the new format.
* Add upgrade path. When opening the disk cache, the codepath first
inspects the `version` field, and decide how to decode.
* Refactor metrics generation code and tests.
* Add tests on upgrade / compatibility with the old format.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Constructing a remote client is no big deal. Yes, it means an extra
download from S3 but it's not that expensive. This simplifies code paths
and scenarios to test. This unifies timelines that have been recently
offloaded with timelines that have been offloaded in an earlier
invocation of the process.
Part of #8088
Disallow a request for timeline ancestor detach if either the to be
detached timeline, or any of the to be reparented timelines are
offloaded or archived.
In theory we could support timelines that are archived but not
offloaded, but archived timelines are at the risk of being offloaded, so
we treat them like offloaded timelines. As for offloaded timelines, any
code to "support" them would amount to unoffloading them, at which point
we can just demand to have the timelines be unarchived.
Part of #8088
This will tell us how much time the compute has spent throttled if
pageserver/safekeeper cannot keep up with WAL generation.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We don't have a convenient way to generate WAL records for benchmarks
and tests.
## Summary of changes
Adds a WAL generator, exposed as an iterator. It currently only
generates logical messages (noops), but will be extended to write actual
table rows later.
Some existing code for WAL generation has been replaced with this
generator, to reduce duplication.
In July of 2023, Bojan and Chi authored
92aee7e07f. Our in production pageservers
are most definitely at a version where they all support gzipped
basebackups.
## Problem
When tenant manifest objects are written without a generation suffix,
concurrently attached pageservers may stamp on each others writes of the
manifest and cause undefined behavior.
Closes: #9543
## Summary of changes
- Use download_generation_object helper when reading manifests, to
search for the most recent generation
- Use Tenant::generation as the generation suffix when writing
manifests.
This patch contains various improvements for the pagectl tool.
## Summary of changes
* Rewrite layer name parsing: LayerName now supports all variants we use
now.
* Drop pagectl's own layer parsing function, use LayerName in the
pageserver crate.
* Support image layer dumping in the layer dump command using
ImageLayer::dump, drop the original implementation.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
See https://github.com/neondatabase/neon/pull/9458
This PR separates PS related changes in #9458 from compute_ctl changes
to enforce that PS is deployed before compute.
## Summary of changes
This PR adds handlings of `--replica` parameters of backebackup to page
server.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Uploads of the tenant manifest could race between different tasks,
resulting in unexpected results in remote storage.
Closes: https://github.com/neondatabase/neon/issues/9556
## Summary of changes
- Create a central function for uploads that takes a tokio::sync::Mutex
- Store the latest upload in that Mutex, so that when there is lots of
concurrency (e.g. archive 20 timelines at once) we can coalesce their
manifest writes somewhat.
## Problem
Indices used to be the only kind of object where we had to search across
generations to find the most recent one. As of
https://github.com/neondatabase/neon/issues/9543, manifests will need
the same treatment.
## Summary of changes
- Refactor download_index_part to a generic download_generation_object
function, which will be usable for downloading manifest objects as well.
python based regression test setup for auth_broker. This uses a http
mock for cplane as well as the JWKs url.
complications:
1. We cannot just use local_proxy binary, as that requires the
pg_session_jwt extension which we don't have available in the current
test suite
2. We cannot use just any old http mock for local_proxy, as auth_broker
requires http2 to local_proxy
as such, I used the h2 library to implement an echo server - copied from
the examples in the h2 docs.
In the base64 payload of an aws cognito jwt, I saw the following:
```
"iss":"https:\/\/cognito-idp.us-west-2.amazonaws.com\/us-west-2_redacted"
```
issuers are supposed to be URLs, and URLs are always valid un-escaped
JSON. However, `\/` is a valid escape character so what AWS is doing is
technically correct... sigh...
This PR refactors the test suite and adds a new regression test for
cognito.
## Problem
click bench job in benchmarking workflow has a performance regression
causing it to run in timeout of max job run.
Suspected root cause:
Project has been migrated from single pageserver to storage controller
managed project on Oct 14th.
Since then the regression shows.
## Summary of changes
Increase timeout of pytest to 12 hours.
Increase job timeout to 12 hours
As pointed out in
https://github.com/neondatabase/neon/pull/9489#discussion_r1814699683 ,
we currently didn't support deletion for offloaded timelines after the
timeline has been loaded from the manifest instead of having been
offloaded.
This was because the upload queue hasn't been initialized yet. This PR
thus initializes the timeline and shuts it down immediately.
Part of #8088
## Problem
We wish to have high level WAL decoding logic in `wal_decoder::decoder`
module.
## Summary of Changes
For this we need the `Value` and `NeonWalRecord` types accessible there, so:
1. Move `Value` and `NeonWalRecord` to `pageserver::value` and
`pageserver::record` respectively.
2. Get rid of `pageserver::repository` (follow up from (1))
3. Move PG specific WAL record types to `postgres_ffi::walrecord`. In
theory they could live in `wal_decoder`, but it would create a circular
dependency between `wal_decoder` and `postgres_ffi`. Long term it makes
sense for those types to be PG version specific, so that will work out nicely.
4. Move higher level WAL record types (to be ingested by pageserver)
into `wal_decoder::models`
Related: https://github.com/neondatabase/neon/issues/9335
Epic: https://github.com/neondatabase/neon/issues/9329
Currently, all callers of `unoffload_timeline` ensure that the tenant
the unoffload operation is called on is active. We rely on it being
active as we activate the timeline below and don't want to race with the
activation code of the tenant (in the worst case, activating a timeline
twice).
Therefore, add this assertion.
Part of #8088
We will only have a C string if the specified role is a string.
Otherwise, we need to resolve references to public, current_role,
current_user, and session_user.
Fixes: https://github.com/neondatabase/cloud/issues/19323
Signed-off-by: Tristan Partin <tristan@neon.tech>
As a DBaaS provider, Neon needs to provide a stable platform for
customers to build applications upon. At the same time however, we also
need to enable customers to use the latest and greatest technology, so
they can prototype their work, and we can solicit feedback. If all
extensions are treated the same in terms of stability, it is hard to
meet that goal.
There are now two new GUCs created by the Neon extension:
neon.allow_unstable_extensions: This is a session GUC which allows
a session to install and load unstable extensions.
neon.unstable_extensions: This is a comma-separated list of extension
names. We can check if a CREATE EXTENSION statement is attempting to
install an unstable extension, and if so, deny the request if
neon.allow_unstable_extensions is not set to true.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Build the pgrag extensions (rag, rag_bge_small_en_v15, and
rag_jina_reranker_v1_tiny_en) as part of the compute node Dockerfile.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Part of https://github.com/neondatabase/neon/issues/8623
## Summary of changes
Removed all aux-v1 config processing code. Note that we persisted it
into the index part file, so we cannot really remove the field from
index part. I also kept the config item within the tenant config, but we
will not read it any more.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The `WalAcceptor` main loop currently uses two nested loops to consume
inbound messages. This makes it hard to slot in periodic events like
metrics collection. It also duplicates the event processing code, and assumes
all messages in steady state are AppendRequests (other messages types may
be dropped if following an AppendRequest).
## Summary of changes
Refactor the `WalAcceptor` loop to be event driven.
## Problem
Based on a recent proxy deployment issue, we deployed another proxy
version (proxy-scram), which was not needed when deploying a specific
proxy type. we have
[PR](https://github.com/neondatabase/infra/pull/2142) to update on the
infra branch and need to update CI in this repo which triggers proxy
deployment.
## Summary of changes
- Update proxy deployment flag
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
virtio-serial is much more performant than /dev/console emulation,
therefore, is much more suitable for the verbose logs inside vm. This
commit changes routing for pgbouncer logs, since we've recently noticed
it can emit large volumes of logs.
Manually tested on staging by pinning a compute image to my test
project.
Should help with https://github.com/neondatabase/cloud/issues/19072
## Problem
We haven't historically taken this API route where we would onboard a
tenant to the controller in detached state. It worked, but we didn't
have test coverage.
## Summary of changes
- Add a test that onboards a tenant to the storage controller in
Detached mode, and checks that deleting it without attaching it works as
expected.
## Problem
If something goes wrong with a live migration, we currently only have
awkward ways to interrupt that:
- Restart the storage controller
- Ask it to do some other modification/migration on the shard, which we
don't really want.
## Summary of changes
- Add a new `/cancel` control API, and storcon_cli wrapper for it, which
fires the Reconciler's cancellation token. This is just for on-call use
and we do not expect it to be used by any other services.
## Problem
When we use pull_timeline API on an evicted timeline, it gets downloaded
to serve the snapshot API request. That means that to evacuate all the
timelines from a node, the node needs enough disk space to download
partial segments from all timelines, which may not be physically the
case.
Closes: #8833
## Summary of changes
- Add a "try" variant of acquiring a residence guard, that returns None
if the timeline is offloaded
- During snapshot API handler, take a different code path if the
timeline isn't resident, where we just read the checkpoint and don't try
to read any segments.
In complement to
https://github.com/neondatabase/tokio-epoll-uring/pull/56.
## Problem
We want to make tokio-epoll-uring slots waiters queue depth observable
via Prometheus.
## Summary of changes
- Add `pageserver_tokio_epoll_uring_slots_submission_queue_depth`
metrics as a `Histogram`.
- Each thread-local tokio-epoll-uring system is given a `LocalHistogram`
to observe the metrics.
- Keep a list of `Arc<ThreadLocalMetrics>` used on-demand to flush data
to the shared histogram.
- Extend `Collector::collect` to report
`pageserver_tokio_epoll_uring_slots_submission_queue_depth`.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
This PR does two things:
1. Obtain a `TimelineCreateGuard` object in `unoffload_timeline`. This
prevents two unoffload tasks from racing with each other. While they
already obtain locks for `timelines` and `offloaded_timelines`, they
aren't sufficient, as we have already constructed an entire timeline at
that point. We shouldn't ever have two `Timeline` objects in the same
process at the same time.
2. don't allow timeline creations for timelines that have been
offloaded. Obviously they already exist, so we should not allow
creation. the previous logic only looked at the timelines list.
Part of #8088
## Problem
The storage components take an entire `SafekeeperConf` during
construction, but only actually use the `no_sync` field. This makes it
hard to understand the storage inputs (which fields do they actually
care about?), and is also inconvenient for tests and benchmarks that
need to set up a lot of unnecessary boilerplate.
## Summary of changes
* Don't take the entire config, but pass in the `no_sync` field
explicitly.
* Take the timeline dir instead of `ttid` as an input, since it's the
only thing it cares about.
* Fix a couple of tests to not leak tempdirs.
* Various minor tweaks.
## Problem
The Postgres version in `TimelinePersistentState::empty()` is incorrect:
the major version should be multiplied by 10000.
## Summary of changes
Multiply the version by 10000.
## Problem
We have some known N^2 behaviors when it comes to large relation counts,
due to the monolithic encoding and full rewrites of of RelDirectory each
time a relation is added. Ordinarily our backpressure mechanisms give
"slow but steady" performance when creating/dropping/truncating
relations. However, in the case of a transaction abort, it is possible
for a single WAL record to drop an unbounded number of relations. The
results in an unavailable compute, as when it sends one of these
records, it can stall the pageserver's ingest for many minutes, even
though the compute only sent a small amount of WAL.
Closes https://github.com/neondatabase/neon/issues/9505
## Summary of changes
- Rewrite relation-dropping code to do one read/modify/write cycle of
RelDirectory, instead of doing it separately for each relation in a
loop.
- Add a test for the bug scenario encountered:
`test_tx_abort_with_many_relations`
The test has ~40s runtime on my workstation. About 1 second of that is
the part where we wait for ingest to catch up after a rollback, the rest
is the slowness of creating and truncating a large number of relations.
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
# Context
In the PGDATA import code
(https://github.com/neondatabase/neon/pull/9218) I add a third way to
create timelines, namely, by importing from a copy of a vanilla PGDATA
directory in object storage.
For idempotency, I'm using the PGDATA object storage location
specification, which is stored in the IndexPart for the entire lifespan
of the timeline. When loading the timeline from remote storage, that
value gets stored inside `struct Timeline` and timeline creation
compares the creation argument with that value to determine idempotency
of the request.
# Changes
This PR refactors the existing idempotency handling of Timeline
bootstrap and branching such that we simply compare the
`CreateTimelineIdempotency` struct, using the derive-generated
`PartialEq` implementation.
Also, by spelling idempotency out in the type names, I find it adds a
lot of clarity.
The pathway to idempotency via requester-provided idempotency key also
becomes very straight-forward, if we ever want to do this in the future.
# Refs
* platform context: https://github.com/neondatabase/neon/pull/9218
* product context: https://github.com/neondatabase/cloud/issues/17507
* stacks on top of https://github.com/neondatabase/neon/pull/9366
neon.c is getting crowded and the logical replication slot monitor is
a good candidate for reorganization. It is very self-contained, and
being in a separate file will make it that much easier to find.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Previously it inserted ~150MiB of WAL while expecting page fetching to
work in 1s (wait_lsn_timeout=1s). It failed in CI in debug builds.
Instead, just directly wait for the wanted condition, i.e. needed
safekeepers are reported in pageserver timed out waiting for WAL error
message. Also set NEON_COMPUTE_TESTING_BASEBACKUP_RETRIES to 1 in this
test and neighbour one, it reduces execution time from 2.5m to ~10s.
## Problem
`local_fs` doesn't return file sizes, which I need in PGDATA import
(#9218)
## Solution
Include file sizes in the result.
I would have liked to add a unit test, and started doing that in
* https://github.com/neondatabase/neon/pull/9510
by extending the common object storage tests
(`libs/remote_storage/tests/common/tests.rs`) to check for sizes as
well.
But it turns out that localfs is not even covered by the common object
storage tests and upon closer inspection, it seems that this area needs
more attention.
=> punt the effort into https://github.com/neondatabase/neon/pull/9510
This PR adds a pageserver mgmt API to scan a layer file for disposable
keys.
It hooks it up to the sharding compaction test, demonstrating that we're
not filtering out all disposable keys.
This is extracted from PGDATA import
(https://github.com/neondatabase/neon/pull/9218)
where I do the filtering of layer files based on `is_key_disposable`.
Fixes#9098
## Problem
`test_readonly_node_gc` is flaky. As shown in [Allure
Report](https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9469/11444519440/index.html#suites/3ccffb1d100105b98aed3dc19b717917/2c02073738fa2b39),
we would get a `AssertionError: No layers should be removed, old layers
are guarded by leases.` after the test restarts pageservers or after
reconfigure pageservers.
During the investigation, we found that the layers has LSN (`0/1563088`)
greater than the LSN (`0x1562000`) protected by the lease. For instance,
**Layers removed**
<pre>
000000067F00000005000034540100000000-000000067F00000005000040050100000000__000000000<b><i>1563088</i></b>-00000001
(shard 0002)
000000068000000000000017E20000000001-010000000100000001000000000000000001__000000000<b><i>1563088</i></b>-00000001
(shard 0002)
</pre>
**Lsn Lease Granted**
<pre>
handle_make_lsn_lease{lsn=<b><i>0/1562000</i></b> shard_id=0002
shard_id=0002}: lease created, valid until 2024-10-21
</pre>
This means that these layers are not guarded by the leases: they are in
"future", not visible to the static endpoint.
## Summary of changes
- Remove the assertion layers_removed == 0 after trigger timeline GC
while holding the lease. Instead rely on the successful execution of
the`SELECT` query to test lease validity.
- Improve test logging
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Before, we didn't copy over the `index-part.json` of offloaded timelines
to the new shard's location, resulting in the new shard not knowing the
timeline even exists.
In #9444, we copy over the manifest, but we also need to do this for
`index-part.json`.
As the operations to do are mostly the same between offloaded and
non-offloaded timelines, we can iterate over all of them in the same
loop, after the introduction of a `TimelineOrOffloadedArcRef` type to
generalize over the two cases. This is analogous to the deletion code
added in #8907.
The added test also ensures that the sharded archival config endpoint
works, something that has not yet been ensured by tests.
Part of #8088
## Problem
https://github.com/neondatabase/neon/pull/9492 added a metric to track
the total count of block gaps filled on rel extend. More context is
needed to understand when this happens. The current theory is that it
may only happen on pg 14 and pg 15 since they do not WAL log relation extends.
## Summary of Changes
A rate limited log is added.
# Problem
Timeline creation can either be bootstrap or branch.
The distinction is made based on whether the `ancestor_*` fields are
present or not.
In the PGDATA import code
(https://github.com/neondatabase/neon/pull/9218), I add a third variant
to timeline creation.
# Solution
The above pushed me to refactor the code in Pageserver to distinguish
the different creation requests through enum variants.
There is no externally observable effect from this change.
On the implementation level, a notable change is that the acquisition of
the `TimelineCreationGuard` happens later than before. This is necessary
so that we have everything in place to construct the
`CreateTimelineIdempotency`. Notably, this moves the acquisition of the
creation guard _after_ the acquisition of the `gc_cs` lock in the case
of branching. This might appear as if we're at risk of holding `gc_cs`
longer than before this PR, but, even before this PR, we were holding
`gc_cs` until after the `wait_completion()` that makes the timeline
creation durable in S3 returns. I don't see any deadlock risk with
reversing the lock acquisition order.
As a drive-by change, I found that the `create_timeline()` function in
`neon_local` is unused, so I removed it.
# Refs
* platform context: https://github.com/neondatabase/neon/pull/9218
* product context: https://github.com/neondatabase/cloud/issues/17507
* next PR stacked atop this one:
https://github.com/neondatabase/neon/pull/9501
## Problem
WAL ingest couples decoding of special records with their handling
(updates to the storage engine mostly).
This is a roadblock for our plan to move WAL filtering (and implicitly
decoding) to safekeepers since they cannot
do writes to the storage engine.
## Summary of changes
This PR decouples the decoding of the special WAL records from their
application. The changes are done in place
and I've done my best to refrain from refactorings and attempted to
preserve the original code as much as possible.
Related: https://github.com/neondatabase/neon/issues/9335
Epic: https://github.com/neondatabase/neon/issues/9329
part of https://github.com/neondatabase/neon/issues/9114,
https://github.com/neondatabase/neon/issues/8836,
https://github.com/neondatabase/neon/issues/8362
The split layer writer code can be used in a more general way: the
caller puts unfinished writers into the batch layer writer and let batch
layer writer to ensure the atomicity of the layer produces.
## Summary of changes
* Add batch layer writer, which atomically finishes the layers.
`BatchLayerWriter::finish` is simply a copy-paste from previous split
layer writers.
* Refactor split writers to use the batch layer writer.
* The current split writer tests cover all code path of batch layer
writer.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We have `git config --global --add safe.directory ...` leftovers from the
past, but `actions/checkout` does it by default (since v3.0.2, we use v4)
## Summary of changes
- Remove `git config --global --add safe.directory ...` hack
## Problem
When a pageserver is misbehaving (e.g. we hit an ingest bug or something
is pathologically slow), the storage controller could get stuck in the
part of live migration that waits for LSNs to catch up. This is a
problem, because it can prevent us migrating the troublesome tenant to
another pageserver.
Closes: https://github.com/neondatabase/cloud/issues/19169
## Summary of changes
- Respect Reconciler::cancel during await_lsn.
A sizeof on a pointer on a 64 bit machine is 8 bytes whereas
Entry::old_name is a 64 byte array of characters. There was most likely
no fallout since the string would start with NUL bytes, but best to fix
nonetheless.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
Filling the gap in with zeroes is annoying for sharded ingest. We are
not sure it even happens in reality.
## Summary of Changes
Add one global counter which tracks how many such gap blocks we filled
on relation extends. We can add more metrics once we understand the
scope.
## Problem
Occasionally, we get failures to start the storage controller's db with
errors like:
```
aborting due to panic at /__w/neon/neon/control_plane/src/background_process.rs:349:67:
claim pid file: lock file
Caused by:
file is already locked
```
e.g.
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9428/11380574562/index.html#/testresult/1c68d413ea9ecd4a
This is happening in a stop,start cycle during a test. Presumably the
pidfile from the startup background process is still held at the point
we stop, because we let pg_ctl keep running in the background.
## Summary of changes
- Refactor pg_ctl invocations into a helper
- In the controller's `start` function, use pg_ctl & a wait loop for
pg_isready, instead of using background_process
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
We can't call pg_current_wal_lsn() if we are a standby instance (read
replica). Any attempt to call this function while in recovery results
in:
ERROR: recovery is in progress
Signed-off-by: Tristan Partin <tristan@neon.tech>
similar to https://github.com/neondatabase/neon/pull/8841, we make the
delta layer writer atomic when finishing the layers.
## Summary of changes
* `put_value` not taking discard fn anymore
* `finish` decides what layers to keep
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Persist timeline offloaded state to S3.
Right now, as of #8907, at each restart of the pageserver, all offloaded
state is lost, so we load the full timeline again. As it starts with an
empty local directory, we might potentially download some files again,
leading to downloads that are ultimately wasteful.
This patch adds support for persisting the offloaded state, allowing us
to never load offloaded timelines in the first place. The persistence
feature is facilitated via a new file in S3 that is tenant-global, which
contains a list of all offloaded timelines. It is updated each time we
offload or unoffload a timeline, and otherwise never touched.
This choice means that tenants where no offloading is happening will not
immediately get a manifest, keeping the change very minimal at the
start.
We leave generation support for future work. It is important to support
generations, as in the worst case, the manifest might be overwritten by
an older generation after a timeline has been unoffloaded (and
unarchived), so the next pageserver process instantiation might wrongly
believe that some timeline is still offloaded even though it should be
active.
Part of #9386, #8088
## Problem
If the environment variables `COMPATIBILITY_NEON_BIN` or
`COMPATIBILITY_POSTGRES_DISTRIB_DIR` are not set (this is usual during a
local run), the tests with the versions mix cannot run.
## Summary of changes
If these variables are not set turn off the version mix.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Previously, figuring out how many tenant shards were managed by a
storage controller was typically done by peeking at the database or
calling into the API. A metric makes it easier to monitor, as
unexpectedly increasing shard counts can be indicative of problems
elsewhere in the system.
## Summary of changes
- Add metrics `storage_controller_pageserver_nodes` (updated on node
CRUD operations from Service) and `storage_controller_tenant_shards`
(updated RAII-style from TenantShard)
At least as far as removing individual files goes, this is the best
pattern for removing. I can't say the same for removing directories, but
I went ahead and changed those to `$(RM) -r` anyway.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Always do timeline init through atomic rename of temp directory. Add
GlobalTimelines::load_temp_timeline which does this, and use it from
both pull_timeline and basic timeline creation. Fixes a collection
of issues:
- previously timeline creation didn't really flushed cfile to disk
due to 'nothing to do if state didn't change' check;
- even if it did, without tmp dir it is possible to lose the cfile
but leave timeline dir in place, making it look corrupted;
- tenant directory creation fsync was missing in timeline creation;
- pull_timeline is now protected from concurrent both itself and
timeline creation;
- now global timelines map entry got special CreationInProgress
entry type which prevents from anyone getting access to timeline
while it is being created (previously one could get access to it,
but it was locked during creation, which is valid but confusing if
creation failed).
fixes#8927
Add a way to list the offloaded timelines.
Before, one had to look at logs to figure out if a timeline has been
offloaded or not, or use the non-presence of a certain timeline in the
list of normal timelines. Now, one can list them directly.
Part of #8088
Part of #8130
## Problem
Pageserver previously goes through the kernel page cache for all the
IOs. The kernel page cache makes light-loaded pageserver have deceptive
fast performance. Using direct IO would offer predictable latencies of
our virtual file IO operations.
In particular for reads, the data pages also have an extremely low
temporal locality because the most frequently accessed pages are cached
on the compute side.
## Summary of changes
This PR enables pageserver to use direct IO for delta layer and image
layer reads. We can ship them separately because these layers are
write-once, read-many, so we will not be mixing buffered IO with direct
IO.
- implement `IoBufferMut`, an buffer type with aligned allocation
(currently set to 512).
- use `IoBufferMut` at all places we are doing reads on image + delta
layers.
- leverage Rust type system and use `IoBufAlignedMut` marker trait to
guarantee that the input buffers for the IO operations are aligned.
- page cache allocation is also made aligned.
_* in-memory layer reads and the write path will be shipped separately._
## Testing
Integration test suite run with O_DIRECT enabled:
https://github.com/neondatabase/neon/pull/9350
## Performance
We evaluated performance based on the `get-page-at-latest-lsn`
benchmark. The results demonstrate a decrease in the number of IOps, no
sigificant change in the latency mean, and an slight improvement on the
p99.9 and p99.99 latencies.
[Benchmark](https://www.notion.so/neondatabase/Benchmark-O_DIRECT-for-image-and-delta-layers-2024-10-01-112f189e00478092a195ea5a0137e706?pvs=4)
## Rollout
We will add `virtual_file_io_mode=direct` region by region to enable
direct IO on image + delta layers.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Part of https://github.com/neondatabase/neon/issues/8836
## Summary of changes
This pull request makes the image layer split writer atomic when
finishing the layers. All the produced layers either finish at the same
time, or discard at the same time. Note that this does not prevent
atomicity when crash, but anyways, it will be cleaned up on pageserver
restart.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
```
+ /tmp/neon/pg_install/v16/bin/psql '***' -c 'SELECT version()'
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /tmp/neon/pg_install/v16/bin/psql)
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by /tmp/neon/pg_install/v16/bin/psql)
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by /tmp/neon/pg_install/v16/lib/libpq.so.5)
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /tmp/neon/pg_install/v16/lib/libpq.so.5)
/tmp/neon/pg_install/v16/bin/psql: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by /tmp/neon/pg_install/v16/lib/libpq.so.5)
```
## Summary of changes
- Use `build-tools:pinned-bookworm` whenever we download Neon artefact
## Problem
Our dockerfiles, for some historical reason, have unconventional names
`Dockerfile.<something>`, and some tools (like GitHub UI) fail to highlight
the syntax in them.
> Some projects may need distinct Dockerfiles for specific purposes. A
common convention is to name these `<something>.Dockerfile`
From: https://docs.docker.com/build/concepts/dockerfile/#filename
## Summary of changes
- Rename `Dockerfile.build-tools` -> `build-tools.Dockerfile`
- Rename `compute/Dockerfile.compute-node` ->
`compute/compute-node.Dockerfile`
In #9453, we want to remove the non-gzipped basebackup code in the
computes, and always request gzipped basebackups.
However, right now the pageserver's page service only accepts basebackup
requests in the following formats:
* `basebackup <tenant_id> <timeline_id>`, lsn is determined by the
pageserver as the most recent one (`timeline.get_last_record_rlsn()`)
* `basebackup <tenant_id> <timeline_id> <lsn>`
* `basebackup <tenant_id> <timeline_id> <lsn> --gzip`
We add a fourth case, `basebackup <tenant_id> <timeline_id> --gzip` to
allow gzipping the request for the latest lsn as well.
In neon_collector_autoscaling.jsonnet, the collector name is hardcoded
to neon_collector_autoscaling. This issue manifests itself such that
sql_exporter would not find the collector configuration.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
Pageserver returns 409 (Conflict) if any of the shards are already
deleting the timeline. This resulted in an error being propagated out of
the HTTP handler and to the client. It's an expected scenario so we
should handle it nicely.
This caused failures in `test_storage_controller_smoke`
[here](https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9435/11390431900/index.html#suites/8fc5d1648d2225380766afde7c428d81/86eee4b002d6572d).
## Summary of Changes
Instead of returning an error on 409s, we now bubble the status code up
and let the HTTP handler code retry until it gets a 404 or times out.
Follow up on #9344. We want to install the extension automatically. We
didn't want to couple the extension into compute_ctl so instead
local_proxy is the one to issue requests specific to the extension.
depends on #9344 and #9395
## Problem
Consider the following sequence of events:
1. Shard location gets downgraded to secondary while there's a libpq
connection in pagestream mode from the compute
2. There's no active tenant, so we return `QueryError::Reconnect` from
`PageServerHandler::handle_get_page_at_lsn_request`.
3. Error bubbles up to `PostgresBackendIO::process_message`, bailing us
out of pagestream mode.
4. We instruct the client to reconnnect, but continue serving the libpq
connection. The client isn't yet aware of the request to reconnect and
believes it is still in pagestream mode. Pageserver fails to deserialize
get page requests wrapped in `CopyData` since it's not in pagestream
mode.
## Summary of Changes
When we wish to instruct the client to reconnect, also disconnect from
the server side after flushing the error.
Closes https://github.com/neondatabase/cloud/issues/17336
Adds endpoint to install extensions:
**POST** `/extensions`
```
{"extension":"pg_sessions_jwt","database":"neondb","version":"1.0.0"}
```
Will be used by `local-proxy`.
Example, for the JWT authentication to work the database needs to have
the pg_session_jwt extension and also to enable JWT to work in RLS
policies.
---------
Co-authored-by: Conrad Ludgate <conradludgate@gmail.com>
## Problem
If we migrate A->B, then B->A, and the notification of A->B fails, then
we might have retained state that makes us think "A" is the last state
we sent to the compute hook, whereas when we migrate B->A we should
really be sending a fresh notification in case our earlier failed
notification has actually mutated the remote compute config.
Closes: #9417
## Summary of changes
- Add a reproducer for the bug
(`test_storage_controller_compute_hook_revert`)
- Refactor compute hook code to represent remote state with
`ComputeRemoteState` which stores a boolean for whether the compute has
fully applied the change as well as the request that the compute
accepted.
- The actual bug fix: after sending a compute notification, if we got a
423 response then update our ComputeRemoteState to reflect that we have
mutated the remote state. This way, when we later try and notify for our
historic location, we will properly see that as a change and send the
notification.
Co-authored-by: Vlad Lazar <vlad@neon.tech>
This PR introduces a `/grants` endpoint which allows setting specific
`privileges` to certain `role` for a certain `schema`.
Related to #9344
Together these endpoints will be used to configure JWT extension and set
correct usage to its schema to specific roles that will need them.
---------
Co-authored-by: Conrad Ludgate <conradludgate@gmail.com>
The forever ongoing effort of juggling multiple versions of rustls :3
now with new crypto library aws-lc.
Because of dependencies, it is currently impossible to not have both
ring and aws-lc in the dep tree, therefore our only options are not
updating rustls or having both crypto backends enabled...
According to benchmarks run by the rustls maintainer, aws-lc is faster
than ring in some cases too <https://jbp.io/graviola/>, so it's not
without its upsides,
## Problem
The pageserver generally trusts the storage controller/control plane to
give it valid generations. However, sometimes it should be obvious that
a generation is bad, and for defense in depth we should detect that on
the pageserver.
This PR is part 1 of 2:
1. in this PR we detect and warn on such situations, but do not block
starting up the tenant. Once we have confidence that the check is not
firing unexpectedly in the field
2. part 2 of 2 will introduce a condition that refuses to start a tenant
in this situtation, and a test for that (maybe, if we can figure out how
to spoof an ancient mtime)
Related: #6951
## Summary of changes
- When loading an index older than 2 weeks, log an INFO message noting
that we will check for other indices
- When loading an index older than 2 weeks _and_ a newer-generation
index exists, log a warning.
Part of the aux v1 retirement
https://github.com/neondatabase/neon/issues/8623
## Summary of changes
Remove write/read path for aux v1, but keeping the config item and the
index part field for now.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Simple PR to log installed_extensions statistics.
in the following format:
```
2024-10-17T13:53:02.860595Z INFO [NEON_EXT_STAT] {"extensions":[{"extname":"plpgsql","versions":["1.0"],"n_databases":2},{"extname":"neon","versions":["1.5"],"n_databases":1}]}
```
## Problem
In #9259, we found that the `check_safekeepers_synced` fast path could
result in a lower basebackup LSN than the `flush_lsn` reported by
Safekeepers in `VoteResponse`, causing the compute to panic once on
startup.
This would happen if the Safekeeper had unflushed WAL records due to a
compute disconnect. The `TIMELINE_STATUS` query would report a
`flush_lsn` below these unflushed records, while `VoteResponse` would
flush the WAL and report the advanced `flush_lsn`. See
https://github.com/neondatabase/neon/issues/9259#issuecomment-2410849032.
## Summary of changes
Flush the WAL if the compute disconnects during WAL processing.
## Problem
Tenant deletion only removes the current shards from remote storage. Any
stale parent shards (before splits) will be left behind. These shards
are kept since child shards may reference data from the parent until new
image layers are generated.
## Summary of changes
* Document a special case for pageserver tenant deletion that deletes
all shards in remote storage when given an unsharded tenant ID, as well
as any unsharded tenant data.
* Pass an unsharded tenant ID to delete all remote storage under the
tenant ID prefix.
* Split out `RemoteStorage::delete_prefix()` to delete a bucket prefix,
with additional test coverage.
* Add a `delimiter` argument to `asset_prefix_empty()` to support
partial prefix matches (i.e. all shards starting with a given tenant
ID).
part of https://github.com/neondatabase/neon/issues/9114
## Summary of changes
gc-compaction may take a lot of disk space, and if it does, the caller
should do a partial gc-compaction. This patch adds space check for the
compaction job.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Adds a configuration variable for timeline offloading support. The added
pageserver-global config option controls whether the pageserver
automatically offloads timelines during compaction.
Therefore, already offloaded timelines are not affected by this, nor is
the manual testing endpoint.
This allows the rollout of timeline offloading to be driven by the
storage team.
Part of #8088
First PR for #9284
Start unification of the client and connection pool interfaces:
- Exclude the 'global_connections_count' out from the get_conn_entry()
- Move remote connection pools to the conn_pool_lib as a reference
- Unify clients among all the conn pools
## Problem
While running `find-garbage` and `purge-garbage`, I encountered two
things that needed updating:
- Console API may omit `user_id` since org accounts were added
- When we cut over to using GenericRemoteStorage, the object listings we
do during purge did not get proper retry handling, so could easily fail
on usual S3 errors, and make the whole process drop out.
...and one bug:
- We had a `.unwrap` which expects that after finding an object in a
tenant path, a listing in that path will always return objects. This is
not true, because a pageserver might be deleting the path at the same
time as we scan it.
## Summary of changes
- When listing objects during purge, use backoff::retry
- Make `user_id` an `Option`
- Handle the case where a tenant's objects go away during find-garbage.
## Problem
See
https://neondb.slack.com/archives/C033A2WE6BZ/p1729007738526309?thread_ts=1722942856.987979&cid=C033A2WE6BZ
When replica receives WAL record which target page is not present in
shared buffer, we evict this page from LFC.
If all pages from the LFC chunk are evicted, then chunk is moved to the
beginning of LRU least to force it reuse.
Unfortunately access_count is not checked and if the entry is access at
this moment then this operation can cause LRU list corruption.
## Summary of changes
Check `access_count` in `lfc_evict`
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Checkpointer related statistics moved from pg_stat_bgwriter to
pg_stat_checkpointer, so we need to adjust our queries accordingly.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Bad copy-paste seemingly. This manifested itself as a failure to start
for the sql_exporter, and was just dying on loop in staging. A future PR
will have E2E testing of sql_exporter.
Signed-off-by: Tristan Partin <tristan@neon.tech>
```
warning: first doc comment paragraph is too long
--> compute_tools/src/installed_extensions.rs:35:1
|
35 | / /// Connect to every database (see list_dbs above) and get the list of installed extensions.
36 | | /// Same extension can be installed in multiple databases with different versions,
37 | | /// we only keep the highest and lowest version across all databases.
| |_
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_long_first_doc_paragraph
= note: `#[warn(clippy::too_long_first_doc_paragraph)]` on by default
help: add an empty line
|
35 ~ /// Connect to every database (see list_dbs above) and get the list of installed extensions.
36 + ///
|
```
part of https://github.com/neondatabase/neon/issues/9255
## Summary of changes
Upgrade remote_storage crate to use hyper1. Hyper0 is used when
providing the streaming HTTP body to the s3 SDK, and it is refactored to
use hyper1.
Signed-off-by: Alex Chi Z <chi@neon.tech>
The current code has forgotten to activate timelines during unoffload,
leading to inability to receive the basebackup, due to the timeline
still being in loading state.
```
stderr:
command failed: compute startup failed: failed to get basebackup@0/0 from pageserver postgresql://no_user@localhost:15014
Caused by:
0: db error: ERROR: Not found: Timeline 508546c79b2b16a84ab609fdf966e0d3/bfc18c24c4b837ecae5dbb5216c80fce is not active, state: Loading
1: ERROR: Not found: Timeline 508546c79b2b16a84ab609fdf966e0d3/bfc18c24c4b837ecae5dbb5216c80fce is not active, state: Loading
```
Therefore, also activate the timeline during unoffloading.
Part of #8088
## Problem
The reconciler use `seq`, but processing of results uses `sequence`.
Order is different too. It makes it annoying to read logs.
## Summary of Changes
Use the same tracing fields in both
## Problem
In test `test_timeline_offloading`, we see failures like:
```
PageserverApiException: queue is in state Stopped
```
Example failure:
https://neon-github-public-dev.s3.amazonaws.com/reports/main/11356917668/index.html#testresult/ff0e348a78a974ee/retries
## Summary of changes
- Amend code paths that handle errors from RemoteTimelineClient to check
for cancellation and emit the Cancelled error variant in these cases
(will give clients a 503 to retry)
- Remove the implicit `#[from]` for the Other error case, to make it
harder to add code that accidentally squashes errors into this
(500-equivalent) error variant.
This would be neater if we made RemoteTimelineClient return a structured
error instead of anyhow::Error, but that's a bigger refactor.
I'm not sure if the test really intends to hit this path, but the error
handling fix makes sense either way.
This should make it a little bit easier for people wanting to check if
their files are formated correctly. Has the added bonus of making the CI
check simpler as well.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Our replication bench project is stuck because it is too slow to
generate basebackup and it caused compute to disconnect.
https://neondb.slack.com/archives/C03438W3FLZ/p1728330685012419
The compute timeout for waiting for basebackup is 10m (is it true?).
Generating basebackup directly on pageserver takes ~3min. Therefore, I
suspect it's because there are too many wasted round-trip time for
writing the 10000+ snapshot aux files. Also, it is possible that the
basebackup process takes too long time retrieving all aux files that it
did not write anything over the wire protocol, causing a read timeout.
Basebackup size is 800KB gzipped for that project and was 55MB tar
before compression.
## Summary of changes
* Potentially fix the issue by placing a write buffer for basebackup.
* Log how many aux files did we read + the time spent on it.
Signed-off-by: Alex Chi Z <chi@neon.tech>
There are quite a few benefits to this approach:
- Reduce config duplication
- The two sql_exporter configs were super similar with just a few
differences
- Pull SQL queries into standalone files
- That means we could run a SQL formatter on the file in the future
- It also means access to syntax highlighting
- In the future, run different queries for different PG versions
- This is relevant because right now, we have queries that are failing
on PG 17 due to catalog updates
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
There is double update of resize cache in `put_rel_truncation`
Also `page_server_request` contains check that fork is MAIN_FORKNUM
which
1. is incorrect (because Vm/FSM pages are shreded in the same way as
MAIN fork pages and
2. is redundant because `page_server_request` is never called for `get
page` request so first part to OR condition is always true.
## Summary of changes
Remove redundant code
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Add a test for timeline offloading, and subsequent unoffloading.
Also adds a manual endpoint, and issues a proper timeline shutdown
during offloading which prevents a pageserver hang at shutdown.
Part of #8088.
## Problem
We were seeing timeouts on migrations in this test.
The test unfortunately tends to saturate local storage, which is shared
between the pageservers and the control plane database, which makes the
test kind of unrealistic. We will also want to increase the scale of
this test, so it's worth fixing that.
## Summary of changes
- Instead of randomly creating timelines at the same time as the other
background operations, explicitly identify a subset of tenant which will
have timelines, and create them at the start. This avoids pageservers
putting a lot of load on the test node during the main body of the test.
- Adjust the tenants created to create some number of 8 shard tenants
and the rest 1 shard tenants, instead of just creating a lot of 2 shard
tenants.
- Use archival_config to exercise tenant-mutating operations, instead of
using timeline creation for this.
- Adjust reconcile_until_idle calls to avoid waiting 5 seconds between
calls, which causes timelines with large shard count tenants.
- Fix a pageserver bug where calls to archival_config during activation
get 404
## Problem
This PR switches CI and Storage to Debain 12 (Bookworm) based images.
## Summary of changes
- Add Debian codename (`bookworm`/`bullseye`) to most of docker tags,
create un-codenamed images to be used by default
- `vm-compute-node-image`: create a separate spec for `bookworm` (we
don't need to build cgroups in the future)
- `neon-image`: Switch to `bookworm`-based `build-tools` image
- Storage components and Proxy use it
- CI: run lints and tests on `bookworm`-based `build-tools` image
We now also track:
- Number of PS IOs in-flight
- Number of pages cached by smgr prefetch implementation
- IO timing histograms for LFC reads and writes, per IO issued
## Problem
There's little insight into the timing metrics of LFC, and what the
prefetch state of each backend is.
This changes that, by measuring (and subsequently exposing) these data
points.
## Summary of changes
- Extract IOHistogram as separate type, rather than a collection of
fields on NeonMetrics
- others, see items above.
Part of https://github.com/neondatabase/neon/issues/8926
Also consider offloaded timelines for obtaining `retain_lsn`. This is
required for correctness for all timelines that have not been flattened
yet: otherwise we GC data that might still be required for reading.
This somewhat counteracts the original purpose of timeline offloading of
not having to iterate over offloaded timelines, but sadly it's required.
In the future, we can improve the way the offloaded timelines are
stored.
We also make the `retain_lsn` optional so that in the future, when we
implement flattening, we can make it None. This also applies to full
timeline objects by the way, where it would probably make most sense to
add a bool flag whether the timeline is successfully flattened, and if
it is, one can exclude it from `retain_lsn` as well.
Also, track whether a timeline was offloaded or not in `retain_lsn` so
that the `retain_lsn` can be excluded from visibility and size
calculation.
Part of #8088
Adds a test for the (now fixed) storage broker limit issue, see #9268
for the description and #9299 for the fix.
Also fix a race condition with endpoint creation/starts running in parallel,
leading to file not found errors.
## Problem
When `Dockerfile.build-tools` gets changed, several PRs catch up with
it and some might get unexpectedly cancelled workflows because of
GitHub's concurrency model for workflows.
See the comment in the code for more details.
It should be possible to revert it after
https://github.com/orgs/community/discussions/41518 (I don't expect it
anytime soon, but I subscribed)
## Summary of changes
- Do not queue `build-build-tools-image` workflows in the concurrency
group
## Problem
At MacOS `pg_dynshmem` file is create in PGDATADIR which cause mismatch
in directories comparison
## Summary of changes
Add this files to the ignore list.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
removes the ConsoleRedirect backend from the main auth::Backends enum,
copy-paste the existing crate::proxy::task_main structure to use the
ConsoleRedirectBackend exclusively.
This makes the logic a bit simpler at the cost of some fairly trivial
code duplication.
preliminary for #9270
The auth::Backend didn't need to be in the mega ProxyConfig object, so I
split it off and passed it manually in the few places it was necessary.
I've also refined some of the uses of config I saw while doing this
small refactor.
I've also followed the trend and make the console redirect backend it's
own struct, same as LocalBackend and ControlPlaneBackend.
## Problem
Action `run-python-test-set` fails if it is not used for `regress_tests`
on release PR, because it expects
`test_compatibility.py::test_create_snapshot` to generate a snapshot,
and the test exists only in `regress_tests` suite.
For example, in https://github.com/neondatabase/neon/pull/9291
[`test-postgres-client-libs`](https://github.com/neondatabase/neon/actions/runs/11209615321/job/31155111544)
job failed.
## Summary of changes
- Add `skip-if-does-not-exist` input to `.github/actions/upload` action
(the same way we do for `.github/actions/download`)
- Set `skip-if-does-not-exist=true` for "Upload compatibility snapshot"
step in `run-python-test-set` action
## Problem
We faced the problem of incompatibility of the different components of
different versions.
This should be detected automatically to prevent production bugs.
## Summary of changes
The test for this situation was implemented
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
Fixes#8340
## Summary of changes
Introduced ErrorKind::quota to handle quota-related errors
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
This job takes an extraordinary amount of time for what I understand it
to do. The obvious win is caching dependencies.
Rory disabled caching in cd5732d9d8.
I assume this was to get gen3 runners up and running.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
This test restarts services in an undefined order (whatever neon_local
does), which means we should be tolerant of warnings that come from
restarting the storage controller while a pageserver is running.
We can see failures with warnings from dropped requests, e.g.
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9307/11229000712/index.html#/testresult/d33d5cb206331e28
```
WARN request{method=GET path=/v1/location_config request_id=b7dbda15-6efb-4610-8b19-a3772b65455f}: request was dropped before completing\n')
```
## Summary of changes
- allow-list the `request was dropped before completing` message on
pageservers before restarting services
When there are no timelines in remote storage, the storage scrubber
would incorrectly trip an assertion with "Must be set if results are
present", referring to the last processed tenant ID. When there are no
timelines we don't expect there to be a tenant ID either.
The assertion was introduced in 37aa6fd.
Only apply the assertion when any timelines are present.
## Problem
Storage controller `/control` API mostly requires admin tokens, for
interactive use by engineers. But for endpoints used by scripts, we
should not require admin tokens.
Discussion at
https://neondb.slack.com/archives/C033RQ5SPDH/p1728550081788989?thread_ts=1728548232.265019&cid=C033RQ5SPDH
## Summary of changes
- Introduce the 'infra' JWT scope, which was not previously used in the
neon repo
- For pageserver & safekeeper node registrations, require infra scope
instead of admin
Note that admin will still work, as the controller auth checks permit
admin tokens for all endpoints irrespective of what scope they require.
This seems to paper over a behavioral difference in Python 3.9 and
Python 3.12 with how dataclasses work with mutable variables. On Python
3.12, I get the following error:
ValueError: mutable default <class 'dict'> for field EXTRACTORS is not allowed: use default_factory
This obviously doesn't occur in our testing environment. When I do what
the error tells me, EXTRACTORS doesn't seem to exist as an attribute on
the class in at least Python 3.9.
The solution provided in this commit seems like the least amount of
friction to keep the wheels turning.
Signed-off-by: Tristan Partin <tristan@neon.tech>
This is simpler than using subprocess.
One difference is in how moto's log output is now collected. Previously,
moto's logs went to stderr, and were collected and printed at the end of
the test by pytest, like this:
2024-10-07T22:45:12.3705222Z ----------------------------- Captured stderr call -----------------------------
2024-10-07T22:45:12.3705577Z 127.0.0.1 - - [07/Oct/2024 22:35:14] "PUT /pageserver-test-deletion-queue-2e6efa8245ec92a37a07004569c29eb7 HTTP/1.1" 200 -
2024-10-07T22:45:12.3706181Z 127.0.0.1 - - [07/Oct/2024 22:35:15] "GET /pageserver-test-deletion-queue-2e6efa8245ec92a37a07004569c29eb7/?list-type=2&delimiter=/&prefix=/tenants/43da25eac0f41412696dd31b94dbb83c/timelines/ HTTP/1.1" 200 -
2024-10-07T22:45:12.3706894Z 127.0.0.1 - - [07/Oct/2024 22:35:16] "PUT /pageserver-test-deletion-queue-2e6efa8245ec92a37a07004569c29eb7//tenants/43da25eac0f41412696dd31b94dbb83c/timelines/eabba5f0c1c72c8656d3ef1d85b98c1d/initdb.tar.zst?x-id=PutObject HTTP/1.1" 200 -
Note the timestamps: the timestamp at the beginning of the line is the
time that the stderr was dumped, i.e. the end of the test, which makes
those timestamps rather useless. The timestamp in the middle of the line
is when the operation actually happened, but it has only 1 s
granularity.
With this change, moto's log lines are printed in the "live log call"
section, as they happen, which makes the timestamps more useful:
2024-10-08 12:12:31.129 INFO [_internal.py:97] 127.0.0.1 - - [08/Oct/2024 12:12:31] "GET /pageserver-test-deletion-queue-e24e7525d437e1874d8a52030dcabb4f/?list-type=2&delimiter=/&prefix=/tenants/7b6a16b1460eda5204083fba78bc360f/timelines/ HTTP/1.1" 200 -
2024-10-08 12:12:32.612 INFO [_internal.py:97] 127.0.0.1 - - [08/Oct/2024 12:12:32] "PUT /pageserver-test-deletion-queue-e24e7525d437e1874d8a52030dcabb4f//tenants/7b6a16b1460eda5204083fba78bc360f/timelines/7ab4c2b67fa8c712cada207675139877/initdb.tar.zst?x-id=PutObject HTTP/1.1" 200 -
## Problem
We need a way to incrementally switch to direct IO. During the rollout
we might want to switch to O_DIRECT on image and delta layer read path
first before others.
## Summary of changes
- Revisited and simplified direct io config in `PageserverConf`.
- We could add a fallback mode for open, but for read there isn't a
reasonable alternative (without creating another buffered virtual file).
- Added a wrapper around `VirtualFile`, current implementation become
`VirtualFileInner`
- Use `open_v2`, `create_v2`, `open_with_options_v2` when we want to use
the IO mode specified in PS config.
- Once we onboard all IO through VirtualFile using this new API, we will
delete the old code path.
- Make io mode live configurable for benchmarking.
- Only guaranteed for files opened after the config change, so do it
before the experiment.
As an example, we are using `open_v2` with
`virtual_file::IoMode::Direct` in
https://github.com/neondatabase/neon/pull/9169
We also remove `io_buffer_alignment` config in
a04cfd754b and use it as a compile time
constant. This way we don't have to carry the alignment around or make
frequent call to retrieve this information from the static variable.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Add /installed_extensions endpoint to collect
statistics about extension usage.
It returns a list of installed extensions in the format:
```json
{
"extensions": [
{
"extname": "extension_name",
"versions": ["1.0", "1.1"],
"n_databases": 5,
}
]
}
```
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
The path to TPC-H queries was incorrectly changed in #9306.
This path is used for `test_tpch` parameterization, so all perf tests
started to fail:
```
==================================== ERRORS ====================================
__________ ERROR collecting test_runner/performance/test_perf_olap.py __________
test_runner/performance/test_perf_olap.py:205: in <module>
@pytest.mark.parametrize("query", tpch_queuies())
test_runner/performance/test_perf_olap.py:196: in tpch_queuies
assert queries_dir.exists(), f"TPC-H queries dir not found: {queries_dir}"
E AssertionError: TPC-H queries dir not found: /__w/neon/neon/test_runner/performance/performance/tpc-h/queries
E assert False
E + where False = <bound method Path.exists of PosixPath('/__w/neon/neon/test_runner/performance/performance/tpc-h/queries')>()
E + where <bound method Path.exists of PosixPath('/__w/neon/neon/test_runner/performance/performance/tpc-h/queries')> = PosixPath('/__w/neon/neon/test_runner/performance/performance/tpc-h/queries').exists
```
## Summary of changes
- Fix the path to tpc-h queries
## Problem
Previously, observed state updates from the reconciler may have
clobbered inline changes made to the observed state by other code paths.
## Summary of changes
Model observed state changes from reconcilers as deltas. This means that
we only update what has changed. Handling for node going off-line concurrently
during the reconcile is also added: set observed state to None in such cases to
respect the convention.
Closes https://github.com/neondatabase/neon/issues/9124
Instead of printing the full absolute path for every file, print just
the filenames.
Before:
2024-10-08 13:19:39.98 INFO [test_pageserver_generations.py:669] Found file /home/heikki/git-sandbox/neon/test_output/test_upgrade_generationless_local_file_paths[debug-pg16]/repo/pageserver_1/tenants/0c04a8df7691a367ad0bb1cc1373ba4d/timelines/f41022551e5f96ce8dbefb9b5d35ab45/000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0-v1-00000001
2024-10-08 13:19:39.99 INFO [test_pageserver_generations.py:673] Renamed /home/heikki/git-sandbox/neon/test_output/test_upgrade_generationless_local_file_paths[debug-pg16]/repo/pageserver_1/tenants/0c04a8df7691a367ad0bb1cc1373ba4d/timelines/f41022551e5f96ce8dbefb9b5d35ab45/000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0-v1-00000001 -> /home/heikki/git-sandbox/neon/test_output/test_upgrade_generationless_local_file_paths[debug-pg16]/repo/pageserver_1/tenants/0c04a8df7691a367ad0bb1cc1373ba4d/timelines/f41022551e5f96ce8dbefb9b5d35ab45/000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0
After:
2024-10-08 13:24:39.726 INFO [test_pageserver_generations.py:667] Renaming files in /home/heikki/git-sandbox/neon/test_output/test_upgrade_generationless_local_file_paths[debug-pg16]/repo/pageserver_1/tenants/3439538816c520adecc541cc8b1de21c/timelines/6a7be8ee707b355de48dd91b326d6ae1
2024-10-08 13:24:39.728 INFO [test_pageserver_generations.py:673] Renamed
000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0-v1-00000001 -> 000000067F0000000100000A8D0100000000-000000067F0000000100000AC10000000002__00000000014F16F0
`download_byte_range()` is basically a copy of `download()` with an
additional option passed to the backend SDKs. This can cause these code
paths to diverge, and prevents combining various options.
This patch adds `DownloadOpts::byte_(start|end)` and move byte range
handling into `download()`.
The "Starting postgres endpoint <name>" message is not needed, because
the neon_cli.py prints the neon_local command line used to start the
endpoint. That contains the same information. The "Postgres startup took
XX seconds" message is not very useful because no one pays attention to
those in the python test logs when things are going smoothly, and if you
do wonder about the startup speed, the same information and more can be
found in the compute log.
Before:
2024-10-07 22:32:27.794 INFO [neon_fixtures.py:3492] Starting postgres endpoint ep-1
2024-10-07 22:32:27.794 INFO [neon_cli.py:73] Running command "/tmp/neon/bin/neon_local endpoint start --safekeepers 1 ep-1"
2024-10-07 22:32:27.901 INFO [neon_fixtures.py:3690] Postgres startup took 0.11398935317993164 seconds
After:
2024-10-07 22:32:27.794 INFO [neon_cli.py:73] Running command "/tmp/neon/bin/neon_local endpoint start --safekeepers 1 ep-1"
Implements an initial mechanism for offloading of archived timelines.
Offloading is implemented as specified in the RFC.
For now, there is no persistence, so a restart of the pageserver will
retrigger downloads until the timeline is offloaded again.
We trigger offloading in the compaction loop because we need the signal
for whether compaction is done and everything has been uploaded or not.
Part of #8088
## Problem
When a node goes offline, we trigger reconciles to migrate shards away
from it. If multiple nodes go offline at the same time, we handled them in
sequence. Hence, we might migrate shards from the first offline node to the second
offline node and increase the unavailability period.
## Summary of changes
Refactor heartbeat delta handling to:
1. Update in memory state for all nodes first
2. Handle availability transitions one by one (we have full picture for each node after (1))
Closes https://github.com/neondatabase/neon/issues/9126
## Problem
On macOS:
```
/Users/runner/work/neon/neon//pgxn/neon/file_cache.c:623:19: error: variable 'has_remaining_pages' is used uninitialized whenever 'for' loop exits because its condition is false [-Werror,-Wsometimes-uninitialized]
```
## Summary of changes
- Initialise `has_remaining_pages` with `false`
It didn't serve much value, and was only used twice.
Path(__file__).parent is a pretty easy invocation to use.
Signed-off-by: Tristan Partin <tristan@neon.tech>
If you override CFLAGS, you also override any flags that PostgreSQL
configure script had picked. That includes many options that enable
extra compiler warnings, like '-Wall', '-Wmissing-prototypes', and so
forth. The override was added in commit 171385ac14, but the intention
of that was to be *more* strict, by enabling '-Werror', not less
strict. The proper way of setting '-Werror', as documented in the docs
and mentioned in PR #2405, is to set COPT='-Werror', but leave CFLAGS
alone.
All the compiler warnings with the standard PostgreSQL flags have now
been fixed, so we can do this without adding noise.
Part of the cleanup issue #9217.
It's not a bug, the variable is initialized when it's used, but the
compiler isn't smart enough to see that through all the conditions.
Part of the cleanup issue #9217.
/pgxn/neon/walproposer_compat.c:192:9: warning: function ‘WalProposerLibLog’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
192 | vsnprintf(buf, sizeof(buf), fmt, args);
| ^~~~~~~~~
The warning:
warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
It's PostgreSQL project style to stick to the old C90 style.
(Alternatively, we could disable it for our extension.)
Part of the cleanup issue #9217.
Prototypes for neon_writev(), neon_readv(), and neon_regisersync()
were missing. But instead of adding the missing prototypes, mark all
the smgr functions 'static'.
Part of the cleanup issue #9217.
Silences these compiler warnings:
/pgxn/neon_walredo/walredoproc.c:452:1: warning: ‘CreateFakeSharedMemoryAndSemaphores’ was used with no prototype before its definition [-Wmissing-prototypes]
452 | CreateFakeSharedMemoryAndSemaphores()
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/pgxn/neon/walproposer_pg.c:541:1: warning: no previous prototype for ‘GetWalpropShmemState’ [-Wmissing-prototypes]
541 | GetWalpropShmemState()
| ^~~~~~~~~~~~~~~~~~~~
Part of the cleanup issue #9217.
In v16 merge, we copied much of heap RMGR, to distinguish vanilla
Postgres heap records from records generated with neon patches, with
the additional CID fields. This function is only used by the
HEAP_TRUNCATE records, however, which we didn't need to copy.
Part of the cleanup issue #9217.
In short: Currently we reserve 75% of memory to the LFC, meaning that if
we scale up to keep postgres using less than 25% of the compute's
memory.
This means that for certain memory-heavy workloads, we end up scaling
much higher than is actually needed — in the worst case, up to 4x,
although in practice it tends not to be quite so bad.
Part of neondatabase/autoscaling#1030.
Update hyper and tonic again in the storage broker, this time with a fix
for the issue that made us revert the update last time.
The first commit is a revert of #9268, the second a fix for the issue.
fixes#9231.
I'm trying to debug a situation with the LR benchmark publisher not
being in the correct state. This should aid in debugging, while just
being generally useful.
PR: https://github.com/neondatabase/neon/pull/9265
Signed-off-by: Tristan Partin <tristan@neon.tech>
In PostgreSQL v16, BUFFERTAGS_EQUAL was replaced with a static inline
macro, BufferTagsEqual. Let's use the new name going forward, and have
backwards-compatibility glue to allow using the new name on v14 and v15,
rather than the other way round. This also makes BufferTagsEquals
consistent with InitBufferTag, for which we were already using the new
name.
Requires https://github.com/neondatabase/neon/pull/9086 first to have
`local_proxy_config`. This logic can still be reviewed implementation
wise.
Create JWT Auth functionality related roles without attributes and
`neon_superuser` group.
Read the JWT related roles from `local_proxy_config` `JWKS` settings and
handle them differently than other console created roles.
The prefetch-queue hash table uses a BufferTag struct as the hash key,
and it's hashed using hash_bytes(). It's important that all the padding
bytes in the key are cleared, because hash_bytes() will include them.
I was getting compiler warnings like this on v14 and v15, when compiling
with -Warray-bounds:
In function ‘prfh_lookup_hash_internal’,
inlined from ‘prfh_lookup’ at
pg_install/v14/include/postgresql/server/lib/simplehash.h:821:9,
inlined from ‘neon_read_at_lsnv’ at pgxn/neon/pagestore_smgr.c:2789:11,
inlined from ‘neon_read_at_lsn’ at pgxn/neon/pagestore_smgr.c:2904:2:
pg_install/v14/include/postgresql/server/storage/relfilenode.h:90:43:
warning: array subscript ‘PrefetchRequest[0]’ is partly outside array
bounds of ‘BufferTag[1]’ {aka ‘struct buftag[1]’} [-Warray-bounds]
89 | ((node1).relNode == (node2).relNode && \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
90 | (node1).dbNode == (node2).dbNode && \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
91 | (node1).spcNode == (node2).spcNode)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pg_install/v14/include/postgresql/server/storage/buf_internals.h:116:9:
note: in expansion of macro ‘RelFileNodeEquals’
116 | RelFileNodeEquals((a).rnode, (b).rnode) && \
| ^~~~~~~~~~~~~~~~~
pgxn/neon/neon_pgversioncompat.h:25:31: note: in expansion of macro
‘BUFFERTAGS_EQUAL’
25 | #define BufferTagsEqual(a, b) BUFFERTAGS_EQUAL(*(a), *(b))
| ^~~~~~~~~~~~~~~~
pgxn/neon/pagestore_smgr.c:220:34: note: in expansion of macro
‘BufferTagsEqual’
220 | #define SH_EQUAL(tb, a, b) (BufferTagsEqual(&(a)->buftag,
&(b)->buftag))
| ^~~~~~~~~~~~~~~
pg_install/v14/include/postgresql/server/lib/simplehash.h:280:77: note:
in expansion of macro ‘SH_EQUAL’
280 | #define SH_COMPARE_KEYS(tb, ahash, akey, b) (ahash ==
SH_GET_HASH(tb, b) && SH_EQUAL(tb, b->SH_KEY, akey))
| ^~~~~~~~
pg_install/v14/include/postgresql/server/lib/simplehash.h:799:21: note:
in expansion of macro ‘SH_COMPARE_KEYS’
799 | if (SH_COMPARE_KEYS(tb, hash, key, entry))
| ^~~~~~~~~~~~~~~
pgxn/neon/pagestore_smgr.c: In function ‘neon_read_at_lsn’:
pgxn/neon/pagestore_smgr.c:2742:25: note: object ‘buftag’ of size 20
2742 | BufferTag buftag = {0};
| ^~~~~~
This commit silences those warnings, although it's not clear to me why
the compiler complained like that in the first place. I found the issue
with padding bytes while looking into those warnings, but that was
coincidental, I don't think the padding bytes explain the warnings as
such.
In v16, the BUFFERTAGS_EQUAL macro was replaced with a static inline
function, and that also silences the compiler warning. Not clear to me
why.
## Problem
See #9199
## Summary of changes
Fix update of hits/misses for LFC and prefetch introduced in
78938d1b59
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
If peer safekeeper needs garbage collected segment it will be fetched
now from s3 using on-demand WAL download. Reduces danger of running out of disk space when safekeeper fails.
1. Adds local-proxy to compute image and vm spec
2. Updates local-proxy config processing, writing PID to a file eagerly
3. Updates compute-ctl to understand local proxy compute spec and to
send SIGHUP to local-proxy over that pid.
closes https://github.com/neondatabase/cloud/issues/16867
NeonWALReader needs to know LSN before which WAL is not available
locally, that is, basebackup LSN. Previously it was taken from
WalpropShmemState, but that's racy, as walproposer sets its there only
after successfull election. Get it directly with GetRedoStartLsn.
Should fix flakiness of
test_ondemand_wal_download_in_replication_slot_funcs etc.
ref #9201
## Problem
Creation of a timelines during a reconciliation can lead to
unavailability if the user attempts to
start a compute before the storage controller has notified cplane of the
cut-over.
## Summary of changes
Create timelines on all currently attached locations. For the latest
location, we still look
at the database (this is a previously). With this change we also look
into the observed state
to find *other* attached locations.
Related https://github.com/neondatabase/neon/issues/9144
## Problem
Secondary tenant heatmaps were always downloaded, even when they hadn't
changed. This can be avoided by using a conditional GET request passing
the `ETag` of the previous heatmap.
## Summary of changes
The `ETag` was already plumbed down into the heatmap downloader, and
just needed further plumbing into the remote storage backends.
* Add a `DownloadOpts` struct and pass it to
`RemoteStorage::download()`.
* Add an optional `DownloadOpts::etag` field, which uses a conditional
GET and returns `DownloadError::Unmodified` on match.
## Problem
The S3 tests couldn't use SSO authentication for local tests against S3.
## Summary of changes
Enable the `sso` feature of `aws-config`. Also run `cargo hakari
generate` which made some updates to `workspace_hack`.
In the passing, rename it to NeonLocalCli, to reflect that the binary
is called 'neon_local'.
Add wrapper for the 'timeline_import' command, eliminating the last
raw call to the raw_cli() function from tests, except for a few in
test_neon_cli.py which are about testing the 'neon_local' iteself. All
the other calls are now made through the strongly-typed wrapper
functions
Add wrappers for a few commands that didn't have them before. Move the
logic to generate tenant and timeline IDs from NeonCli to the callers,
so that NeonCli is more purely just a type-safe wrapper around
'neon_local'.
* I had to install `m4` in order to be able to run locally
* The docs/docker.md was missing a pointer to where the compute node
code is
(Was originally on #8888 but I am pulling this out)
## Problem
`Oversized vectored read [...]` logs are spewing in prod because we have
a few keys that
are unexpectedly large:
* reldir/relblock - these are unbounded, so it's known technical debt
* slru block - they can be a bit bigger than 128KiB due to storage
format overhead
## Summary of changes
* Bump threshold to 130KiB
* Don't warn on oversized reldir and dbdir keys
Closes https://github.com/neondatabase/neon/issues/8967
Follow-up of #9234 to give hyper 1.0 the version-free name, and the
legacy version of hyper the one with the version number inside. As we
move away from hyper 0.14, we can remove the `hyper0` name piece by
piece.
Part of #9255
Because:
- it's nice to be up-to-date,
- we already had axum 0.7 in our dependency tree, so this avoids having
to compile two versions, and
- removes one of the remaining dpendencies to hyper version 0
Also bumps the 'tokio-tungstenite' dependency, to avoid having two
versions in the dependency tree.
The apt install stage before this commit:
0 upgraded, 391 newly installed, 0 to remove and 9 not upgraded.
Need to get 261 MB of archives.
after:
0 upgraded, 367 newly installed, 0 to remove and 9 not upgraded.
Need to get 220 MB of archives.
As seen in https://github.com/neondatabase/cloud/issues/17335, during
releases we can have ingest lags that are above the limits for warnings.
However, such lags are part of normal pageserver startup.
Therefore, calculate a certain cooldown timestamp until which we accept
lags up to a certain size. The heuristic is chosen to grow the later we get
to fully load the tenant, and we also add 60 seconds as a grace period
after that term.
Fixes#9231 .
Upgrade hyper to 1.4.0 and use hyper 1.4 instead of 0.14 in the storage
broker, together with tonic 0.12. The two upgrades go hand in hand.
Thanks to the broker being independent from other components, we can
upgrade its hyper version without touching the other components, which
makes things easier.
## Problem
```
Warning: The file chosen for install of requests 2.32.0 (requests-2.32.0-py3-none-any.whl) is yanked. Reason for being yanked: Yanked due to conflicts with CVE-2024-35195 mitigation
```
## Summary of changes
- Update `requests` to fix the warning
- Update `psycopg2-binary`
Some parentheses in conditional expressions are redundant or necessary
for clarity conditional expressions in walproposer.
## Summary of changes
Change some parentheses to clarify conditions in walproposer.
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
We are seeing frequent pageserver startup timelines while it calls
syncfs(). There is an existing fixture that syncs _after_ tests, but not
before the first one. We hypothesize that some failures are happening on
the first test in a job.
## Summary of changes
- extend the existing sync_after_each_test to be a sync between all
tests, including sync'ing before running the first test. That should
remove any ambiguity about whether the sync is happening on the correct
node.
This is an alternative to https://github.com/neondatabase/neon/pull/8957
-- I didn't realize until I saw Alexander's comment on that PR that we
have an existing hook that syncs filesystems and can be extended.
close https://github.com/neondatabase/neon/issues/9160
For whatever reason, pg17's WAL pattern seems different from others,
which triggers some flaky behavior within the compaction smoke test.
## Summary of changes
* Run L0 compaction before proceeding with the read benchmark.
* So that we can ensure the num of L0 layers is 0 and test the
compaction behavior only with L1 layers.
We have a threshold for triggering L0 compaction. In some cases, the
test case did not produce enough L0 layers to do a L0 compaction,
therefore leaving the layer map with 3+ L0 layers above the L1 layers.
This increases the average read depth for the timeline.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We don't have an alert for long running reconciles. Stuck reconciles are
problematic
as we've seen in a recent incident.
## Summary of changes
Add a new metric `storage_controller_reconcile_long_running_total` with
labels: `{tenant_id, shard_number, seq}`.
The metric is removed after the long running reconcile finishes. These
events should be rare, so we won't break
the bank on cardinality.
Related https://github.com/neondatabase/neon/issues/9150
## Problem
If a timeline was deleted right before waiting for LSNs to catch up
before the cut-over,
then we would wait forever.
## Summary of changes
Fix the issue and add a test for timeline deletions mid migration.
Related https://github.com/neondatabase/neon/issues/9144
## Problem
Recent change to avoid the "became visible" log messages from certain
tasks missed a task: the logical size calculation that happens as a
child of synthetic size calculation.
Related: https://github.com/neondatabase/neon/issues/9058
## Summary of changes
- Add OnDemandLogicalSize to the list of permitted tasks for reads
making a covered layer visible
- Tweak the log message to use layer name instead of key: this is more
terse, and easier to use when debugging, as one can search for it
elsewhere to see when the layer was written/downloaded etc.
```shell
$ cargo run -p proxy --bin proxy -- --auth-backend=web --webauth-confirmation-timeout=5s
```
```
$ psql -h localhost -p 4432
NOTICE: Welcome to Neon!
Authenticate by visiting within 5s:
http://localhost:3000/psql_session/e946900c8a9bc6e9
psql: error: connection to server at "localhost" (::1), port 4432 failed: Connection refused
Is the server running on that host and accepting TCP/IP connections?
connection to server at "localhost" (127.0.0.1), port 4432 failed: ERROR: Disconnected due to inactivity after 5s.
```
In PG17, there is this newfangled custom wait events system. This commit
adds that feature to Neon, so that users can see what their backends may
be waiting for when a PostgreSQL backend is playing the waiting game in
Neon code.
check-rust-style fails because tonic version too old, this does not seem
to be an easy fix, so ignore it from the deny list.
Signed-off-by: Alex Chi Z <chi@neon.tech>
MaxBackends doesn't include auxiliary processes. Whenever an aux process
made IO operations that updated the counters, they would scribble over
shared memory beoynd the end of the array. The relsize cache hash table
comes after the array, so the symptom was an error about hash table
corruption in the relsize cache hash.
When endpoint is stopped in immediate mode and started again there is a
chance of old connection delivering some WAL to safekeepers after second
start checked need for sync-safekeepers and thus grabbed basebackup LSN.
It makes basebackup unusable, so compute panics. Avoid flakiness by
waiting for walreceivers on safekeepers to be gone in such cases. A
better way would be to bump term on safekeepers if sync-safekeepers is
skipped, but it needs more infrastructure.
ref https://github.com/neondatabase/neon/issues/9079
Found while searching for other issues in shared memory.
The bug should be benign, in that it over-allocates memory for this
struct, but doesn't allow for out-of-bounds writes.
Following #7656, `TenantConfOpt::TryFrom<toml_edit::Item>` appears to be
dead code. This patch removes `TenantConfOpt::TryFrom<toml_edit::Item>`.
The code does appear to be dead, since the TOML config is deserialized
into `TenantConfig` (via `LocationConfig`) and then converted into
`TenantConfOpt`.
This was verified by adding a panic to `try_from()` and running the
pageserver unit tests as well as a local end-to-end cluster (including
creating a new tenant and restarting the pageserver). This did not fail,
so this is not used on the common happy path at least. No explicit
`try_from` or `try_into` calls were found either.
Resolves#8918.
aux v2 migration is near the end and I rewrote the RFC based on what I
proposed (several months before...) and what I actually implemented.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
These are the perf counters added in commit 263dfba6ee.
Note: This relies on 'neon' extension version 1.5. The default was
bumped to 1.5 in commit d696c41807.
---------
Co-authored-by: Matthias van de Meent <matthias@neon.tech>
On bookworm, 'cmake' is new enough that we can just use it. On bullseye,
we can get a new-enough package from backports. By including 'cmake' in
the build-deps stage, we don't need to install it separately in all the
later build stages that need it.
See https://github.com/neondatabase/neon/pull/2699, where we switched to
downloading and building a specific version.
Microsoft exposes JWKs without the alg header. It's only included on the
tokens. Not a problem.
Also noticed that wrt the `typ` header:
> It will typically not be used by applications when it is already known
that the object is a JWT. This parameter is ignored by JWT
implementations; any processing of this parameter is performed by the
JWT application.
Since we know we are expecting JWTs only, I've followed the guidance and
removed the validation.
## Problem
We need the
[pg_session_jwt](https://github.com/neondatabase/pg_session_jwt/)
extension in the compute image. This PR adds it.
## Summary of changes
I added the `pg_session_jwt` extension in a very similar way to how the
pggraphql and pgtiktoken extensions were added (since they're all
written with pgrx). Then I tested this.
```
$ cd docker-compose/
$ PG_VERSION=16 TAG=10667533475 docker-compose up --build -d
$ psql postgresql://cloud_admin:cloud_admin@localhost:55433/postgres
cloud_admin@postgres=# create extension pg_session_jwt;
CREATE EXTENSION
Time: 43.048 ms
cloud_admin@postgres=# \df auth.*;
List of functions
┌────────┬──────────────────┬──────────────────┬─────────────────────┬──────┐
│ Schema │ Name │ Result data type │ Argument data types │ Type │
├────────┼──────────────────┼──────────────────┼─────────────────────┼──────┤
│ auth │ get │ jsonb │ s text │ func │
│ auth │ init │ void │ kid bigint, s jsonb │ func │
│ auth │ jwt_session_init │ void │ s text │ func │
│ auth │ user_id │ text │ │ func │
└────────┴──────────────────┴──────────────────┴─────────────────────┴──────┘
(4 rows)
cloud_admin@postgres=# select auth.init(cast('1' as bigint), to_jsonb(TEXT '{ "kty": "EC", "kid": "571683be-33cf-4e67-bccc-8905c0ebb862", "crv": "P-521", "alg": "ES512", "x": "AM_GsnQvKML2yXdn_OsN8PdgO1Sf9XMXih5vQMKLmJkp-Iz_FFWJUt6uyR_qp4brr8Ji2kjGJgN4cQJpg2kskH7V", "y": "AZg-salw24lCmsBP-BCBa5jT6INkTwLtCOC7o0BIxDVvmIEH1-PQAJVYVJPTFvPMi_PLa0QlOm-ufJYkynwa2Mau" }'));
ERROR: called `Result::unwrap()` on an `Err` value: Error("invalid type: string \"{ \\\"kty\\\": \\\"EC\\\", \\\"kid\\\": \\\"571683be-33cf-4e67-bccc-8905c0ebb862\\\", \\\"crv\\\": \\\"P-521\\\", \\\"alg\\\": \\\"ES512\\\", \\\"x\\\": \\\"AM_GsnQvKML2yXdn_OsN8PdgO1Sf9XMXih5vQMKLmJkp-Iz_FFWJUt6uyR_qp4brr8Ji2kjGJgN4cQJpg2kskH7V\\\", \\\"y\\\": \\\"AZg-salw24lCmsBP-BCBa5jT6INkTwLtCOC7o0BIxDVvmIEH1-PQAJVYVJPTFvPMi_PLa0QlOm-ufJYkynwa2Mau\\\" }\", expected struct JwkEcKey", line: 0, column: 0)
Time: 6.991 ms
```
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Move the download location to a proper URL
## Problem
`test_multi_attach` is sometimes failing with `invalid compute status
for configuration request: Configuration`. This is likely a result of
the test attempting to reconfigure the compute at the same time as the
storage controller is doing so.
This test was originally written before the storage controller existed,
and is not expecting anything else to be reconfiguring computes at the
same time.
## Summary of changes
- Configure the tenant into scheduling policy `Stop` in the storage
controller at the start of the test, so that it won't try to do anything
to the tenant while the test is running.
* tracing-utils now returns a `Layer` impl. Removes the need for crates
to
import OTel crates.
* Drop the /v1/traces URI check. Verified that the code does the right
thing.
* Leave a TODO to hook in an error handler for OTel to log errors to
when it
assumes the regular pipeline cannot be used/is broken.
## Problem
The live migration code waits forever for the compute notification hook,
on the basis that until it succeeds, the compute is probably using the
old location and we shouldn't detach it.
However, if a pageserver stops or restarts in the background, then this
original location might no longer be available, so there is no point
waiting. Waiting is also actively harmful, because it prevents other
reconciliations happening for the tenant shard, such as during an
upgrade where a stuck "drain" migration might prevent the later "fill"
migration from moving the shard back to its original location.
## Summary of changes
- Refactor the notification wait loop into a function
- Add a checks during the loop, for the origin node's cancellation token
and an explicit HTTP request to the origin node to confirm the shard is
still attached there.
Closes: https://github.com/neondatabase/neon/issues/8901
neon_cli.create_tenant() creates a new tenant *and* a timeline on the
tenant, with name "main". In most tests, there's no need to create
another timeline on the same tenant.
There are some more tests that do that, but in the remaining cases, I
wasn't be 100% if the presence of extra root timelines affect what the
tests test, so I left them alone.
## Problem
This test waits for a request to finish, and then expects deletion to
complete almost immediately. The request completes, but it's a 202, the
timeline is still deleting in the background: we need to be more
patient.
## Summary of changes
- Adjust iterations from 2 to 10 when waiting for deletion
## Problem
The Neon components, built locally and by the GitHub workflow have
slightly different version prefixes (git: vs git-env:)
This does not allow running tests against local builds correctly.
## Summary of changes
The regular expressions were changed to work with both
prefixes.
## Problem
Legacy functions that were called as `mgr::` and relied on the static
TENANTS, see #5796
## Summary of changes
- Move the last stray function (immediate_gc) into TenantManager
Closes: https://github.com/neondatabase/neon/issues/5796
Commit 263dfba6ee introduced neon extension version 1.5, which included
some new functions and views for metrics. It didn't bump the default
neon extension number yet, so that we could still safely roll back to
the old binary if necessary. This bumps the default version.
## Problem
`pgbench-pgvector` job from Nightly Benchmarks fails with the error:
```
/__w/_temp/f45bc2eb-4c4c-4f0a-8030-99079303fa65.sh: line 17: LD_LIBRARY_PATH: unbound variable
```
## Summary of changes
- Fix `LD_LIBRARY_PATH: unbound variable` error in benchmarks
## Problem
Nightly Benchmarks have been broken for some time due to various
reasons, this PR fixes it
## Summary of changes
- Pull `build-tools` image from dockerhub for `benchmarking` workflow
- Use `aws-actions/configure-aws-credentials` to upload/download
artifacts from S3
- Fix Postgres 16 installation (for pgbench)
Part of https://github.com/neondatabase/cloud/issues/13127. Resolves
#9153
What changed in this PR:
1. Adds `ComputeSpec.disk_quota_bytes: Option<u64>`
2. Adds new arg to compute_ctl: `--set-disk-quota-for-fs <mountpoint>`
3. Implements running `/neonvm/bin/set-disk-quota` with the right value
if both cmdline arg AND field in the spec are specified
4. Patches `/etc/sudoers.d` to allow `compute_ctl` to set quota with
sudo
This PR is very similar to the swap support added earlier, you can take
a look at it as prior art: #7434
In theory, it can be implemented outside of compute_ctl when we will
have a separate neonvm daemon, but we are not there yet. Current
implementation is the simplest possible to unblock computes with larger
disks.
All code related to usage of `/neonvm/bin/set-disk-quota` is located in
`disk_quota.rs`. We need to call this script with the following
arguments: `/neonvm/bin/set-disk-quota {size_kb} {mountpoint}`. Quotas
are set on the filesystem level, so we need to provide path to the
directory that filesystem was mounted to.
I tested this change locally with
https://github.com/neondatabase/cloud/pull/17270. It should be safe to
merge, because this feature is gated by both cmdline arg and field in
the spec. If control-plane doesn't set values in both places,
compute_ctl won't be affected by this change.
close https://github.com/neondatabase/neon/issues/8140
The original issue is rather vague on what we should do. After
discussion w/ @problame we decided to narrow down the problems we want
to solve in that issue.
* read path -- do not panic for now.
* write path -- panic only on write errors (i.e., device error, fsync
error), but not on no-space for now.
The guideline is that if the pageserver behavior could lead to violation
of persistent constraints (i.e., return an operation as successful but
not actually persisting things), we should panic. Fsync is the place
where both of us agree that we should panic, because if fsync fails, the
kernel will mark dirty pages as clean, and the next fsync will not
necessarily return false. This would make the storage client assume the
operation is successful.
## Summary of changes
Make fsync panic on fatal errors.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
To make it faster. On my laptop, it takes about 30 before this commit.
In the arm64 debug variant in CI, it takes about 120 s. Reduce it by
factor of 4.
Part of #8130
## Problem
After deploying https://github.com/neondatabase/infra/pull/1927, we
shipped `io_buffer_alignment=512` to all prod region. The
`AdjacentVectoredReadBuilder` code path is no longer taken and we are
running pageserver unit tests 6 times in the CI. Removing it would
reduce the test duration by 30-60s.
## Summary of changes
- Remove `AdjacentVectoredReadBuilder` code.
- Bump the minimum `io_buffer_alignment` requirement to at least 512
bytes.
- Use default `io_buffer_alignment` for Rust unit tests.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Part of #7497, closes#8817.
## Problem
See #8817.
## Summary of changes
**compute_ctl**
- Renew lsn lease as soon as `/configure` updates pageserver_connstr,
use `state_changed` Condvar for synchronization.
**pageserver**
As mentioned in
https://github.com/neondatabase/neon/issues/8817#issuecomment-2315768076,
we still want some permanent error reported if a lease cannot be
granted. By considering attachment mode and the added
`lsn_lease_deadline` when processing lease requests, we can also bound
the case of bad requests to a very short period after migration/restart.
- Refactor https://github.com/neondatabase/neon/pull/9024 and move
`lsn_lease_deadline` to `AttachedTenantConf` so timeline can easily
access it.
- Have separate HTTP `init_lsn_lease` and libpq `renew_lsn_lease` API.
- Always do LSN verification for the initial HTTP lease request.
- LSN verification for the renewal is **still done** when tenants are
not in `AttachedSingle` and we have pass the `lsn_lease_deadline`, which
give plenty of time for compute to renew the lease.
**neon_local**
- add and call `timeline_init_lsn_lease` mgmt_api at static endpoint
start. The initial lsn lease http request is sent when we run `cargo
neon endpoint start <static endpoint>`.
## Testing
- Extend `test_readonly_node_gc` to do pageserver restarts and
migration.
## Future Work
- The control plane should make the initial lease request through HTTP
when creating a static endpoint. This is currently only done in
`neon_local`.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Verbosity in this case is good when reading the code. Short options are
better when operating in an interactive shell.
Signed-off-by: Tristan Partin <tristan@neon.tech>
I hope this lets us capture backtraces in CI. At least it makes it
work on my laptop, which is valuable even if we need to do more for
CI.
See issue #2800.
## Problem
We get some unexpected errors, but don't know who they're happening for.
## Summary of change
Add tenant id and peer address to PG connection error logs.
Related https://github.com/neondatabase/cloud/issues/17336
We separated client error from basebackup error log lines in
https://github.com/neondatabase/neon/pull/7523, but we didn't do
anything for the metrics. In this patch, we fixed it.
ref https://github.com/neondatabase/neon/issues/8970
## Summary of changes
We use the same criteria as in `log_query_error` producing an info line
(instead of error) for the metrics. We added a `client_error` category
for the basebackup query time metrics.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
- In https://github.com/neondatabase/neon/pull/8784, the validate
controller API is modified to check generations directly in the
database. It batches tenants into separate queries to avoid generating a
huge statement, but
- While updating this, I realized that "control_plane_client" is a kind
of confusing name for the client code now that it primarily talks to the
storage controller (the case of talking to the control plane will go
away in a few months).
## Summary of changes
- Big rename to "ControllerUpcallClient" -- this reflects the storage
controller's api naming, where the paths used by the pageserver are in
`/upcall/`
- When sending validate requests, break them up into chunks so that we
avoid possible edge cases of generating any HTTP requests that require
database I/O across many thousands of tenants.
This PR mixes a functional change with a refactor, but the commits are
cleanly separated -- only the last commit is a functional change.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
There was a tricky race condition in compute_ctl, that sometimes makes
configurator skip updates. It makes a deadlock because:
- control-plane cannot configure compute, because it's in
ConfigurationPending state
- compute_ctl doesn't do any reconfiguration because
`configurator_main_loop` missed notification for it
Full sequence that reproduces the issue:
1. `start_compute` finishes works and changes status
`self.set_status(ComputeStatus::Running);`
2. configurator received update about `Running` state and dropped the
mutex lock in the iteration
3. `/configure` request was triggered at the same time as step 1, and
got the mutex lock
4. same `/configure` request set the spec and updated the state to
`ConfigurationPending`, also sent a notification
5. next iteration in configurator got the mutex lock, but missed the
notification
There are more details in this slack thread:
https://neondb.slack.com/archives/C03438W3FLZ/p1727281028478689?thread_ts=1727261220.483799&cid=C03438W3FLZ
---------
Co-authored-by: Alexey Kondratov <kondratov.aleksey@gmail.com>
## Problem
The latest storage release has generated artifacts for Postgres 17,
so we can enable compatibility tests this version
## Summary of changes
- Unskip `test_backward_compatibility` / `test_forward_compatibility` on
Postgres 17
We don't want to allow any new child timelines of archived timelines. If
you want any new child timelines, you should first un-archive the
timeline.
Part of #8088
The warning:
warning: first doc comment paragraph is too long
--> pageserver/src/tenant/checks.rs:7:1
|
7 | / /// Checks whether a layer map is valid (i.e., is a valid result
of the current compaction algorithm if no...
8 | | /// The function checks if we can split the LSN range of a delta
layer only at the LSNs of the delta layer...
9 | | ///
10 | | /// ```plain
| |_
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#too_long_first_doc_paragraph
= note: `#[warn(clippy::too_long_first_doc_paragraph)]` on by default
help: add an empty line
|
7 ~ /// Checks whether a layer map is valid (i.e., is a valid result of
the current compaction algorithm if nothing goes wrong).
8 + ///
|
Fix by applying the suggestion.
A cherry-pick from the previous release (#9131)
## Problem
Login to prod ECR doesn't work anymore:
```
Retrieving registries data through *** SDK...
*** ECR detected with eu-central-1 region
Error: The security token included in the request is invalid.
```
## Summary of changes
- Fix login to prod ECR by using `aws-actions/configure-aws-credentials`
The pg_install/build directory contains .o files and such intermediate
results from the build, which are not needed in the final tarball.
Except for src/test/regress/regress.so and a few other .so files in that
directory; keep those.
This reduces the size of the neon-Linux-X64-release-artifact.tar.zst
artifact from about 1.5 GB to 700 MB.
(I attempted this a long time ago already, by moving the build/
directory out of pg_install altogether, see PR #2127. But I never got
around to finish that work.)
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
These commits are split off from
https://github.com/neondatabase/neon/pull/8971/commits where I was
fixing this to make a better scale test pass -- Vlad also independently
recognized these issues with cloudbench in
https://github.com/neondatabase/neon/issues/9062.
1. The storage controller proxies GET requests to pageservers based on
their intent, not the ground truth of where they're really attached.
2. Proxied requests can race with scheduling to tenants, resulting in
404 responses if the request hits the wrong pageserver.
Closes: https://github.com/neondatabase/neon/issues/9062
## Summary of changes
1. If a shard has a running reconciler, then use the database
generation_pageserver to decide who to proxy the request to
2. If such a request gets a 404 response and its scheduled node has
changed since the request was dispatched.
## Problem
Storage controller didn't previously consider AZ locality between
compute and pageservers
when scheduling nodes. Control plane has this feature, and, since we are
migrating tenants
away from it, we need feature parity to avoid perf degradations.
## Summary of changes
The change itself is fairly simple:
1. Thread az info into the scheduler
2. Add an extra member to the scheduling scores
Step (2) deserves some more discussion. Let's break it down by the shard
type being scheduled:
**Attached Shards**
We wish for attached shards of a tenant to end up in the preferred AZ of
the tenant since that
is where the compute is like to be.
The AZ member for `NodeAttachmentSchedulingScore` has been placed
below the affinity score (so it's got the second biggest weight for
picking the node). The rationale for going
below the affinity score is to avoid having all shards of a single
tenant placed on the same node in 2 node
regions, since that would mean that one tenant can drive the general
workload of an entire pageserver.
I'm not 100% sure this is the right decision, so open to discussing
hoisting the AZ up to first place.
**Secondary Shards**
We wish for secondary shards of a tenant to be scheduled in a different
AZ from the preferred one
for HA purposes.
The AZ member for `NodeSecondarySchedulingScore` has been placed first,
so nodes in different AZs
from the preferred one will always be considered first. On small
clusters, this can mean that all the secondaries
of a tenant are scheduled to the same pageserver, but secondaries don't
use up as many resources as the
attached location, so IMO the argument made for attached shards doesn't
hold.
Related: https://github.com/neondatabase/neon/issues/8848
As @koivunej mentioned in the storage channel, for regress test, we
don't need to create a log file for the scrubber, and we should reduce
noisy logs.
## Summary of changes
* Disable log file creation for storage scrubber
* Only log at info level
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
1. Increase statement_timeout. It defaults to 120 s, which is not quite
enough on slow or busy systems with debug build. On my laptop, the index
creation takes about 100 s. On buildfarm, we've seen failures, e.g:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-9084/10997888708/index.html#suites/821f97908a487f1d7d3a2a4dd1571e99/db1834bddfe8c5b9/
2. Keep twiddling the LFC size through the whole test. Before, we would
do it for the first 10 seconds, but that only covers a small part of the
pgbench initialization phase. Change the loop so that the pgbench run
time determines how long the test runs, and we keep changing the LFC for
the whole time.
In the passing, also fix bogus test description, copy-pasted from a
completely unrelated test.
## Problem
Compilation of neon extension on macOS produces a warning
```
pgxn/neon/neon_perf_counters.c:50:1: error: non-void function does not return a value [-Werror,-Wreturn-type]
```
## Summary of changes
- Change the return type of `NeonPerfCountersShmemInit` to void
In the `imitate_synthetic_size_calculation_worker` function, we might
obtain the `Cancelled` error variant instead of hitting the cancellation
token based path. Therefore, catch `Cancelled` and handle it analogously
to the cancellation case.
Fixes#8886.
Part of #8130.
## Problem
Currently, decompression is performed within the `read_blobs`
implementation and the decompressed blob will be appended to the end of
the `BytesMut` buffer. We will lose this flexibility of extending the
buffer when we switch to using our own dio-aligned buffer (WIP in
https://github.com/neondatabase/neon/pull/8730). To facilitate the
adoption of aligned buffer, we need to refactor the code to perform
decompression outside `read_blobs`.
## Summary of changes
- `VectoredBlobReader::read_blobs` will return `VectoredBlob` without
performing decompression and appending decompressed blob. It becomes the
caller's responsibility to decompress the buffer.
- Added a new `BufView` type that functions as `Cow<Bytes, &[u8]>`.
- Perform decompression within `VectoredBlob::read` so that people don't
have to explicitly thinking about compression when using the reader
interface.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Even with the 100 ms interval, on my laptop the pageserver always
becomes available on second attempt, so this saves about 900 ms at
every test startup.
## Problem
All the other patches were moved to the compute directory, and only one
was left in the patches subdirectory in the root directory.
## Summary of changes
The patch was moved to the compute directory as others
The PostgreSQL 17 vendor module is now based on postgres/postgres @
d7ec59a63d745ba74fba0e280bbf85dc6d1caa3e, presumably the final code
change before the V17 tag.
## Problem
Scheduling on tenant creation uses different heuristics compared to the
scheduling done during
background optimizations. This results in scenarios where shards are
created and then immediately
migrated by the optimizer.
## Summary of changes
1. Make scheduler aware of the type of the shard it is scheduling
(attached vs secondary).
We wish to have different heuristics.
2. For attached shards, include the attached shard count from the
context in the node score
calculation. This brings initial shard scheduling in line with what the
optimization passes do.
3. Add a test for (2).
This looks like a bigger change than required, but the refactoring
serves as the basis for az-aware
shard scheduling where we also need to make the distinction between
attached and secondary shards.
Closes https://github.com/neondatabase/neon/issues/8969
## Problem
We need to be able to run the regression tests against a cloud-based
Neon staging instance to prepare the migration to the arm architecture.
## Summary of changes
Some tests were modified to work on the cloud instance (i.e. added
passwords, server-side copy changed to client-side, etc)
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Part of #8128, fixes#8872.
## Problem
See #8872.
## Summary of changes
- Retry `list_timeline_blobs` another time if
- there are layer file keys listed but not index.
- failed to download index.
- Instrument code with `analyze-tenant` and `analyze-timeline` span.
- Remove `initdb_archive` check, it could have been deleted.
- Return with exit code 1 on fatal error if `--exit-code` parameter is set.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Instead of adding them to the VM image late in the build process, when
putting together the final VM image, include them in the earlier
compute image already. That makes it more convenient to edit the
files, and to test them.
Seems nice to keep all these together. This also provides a nice place
for a README file to describe the compute image build process. For
now, it briefly describes the contents of the directory, but can be
expanded.
We can't FlushOneBuffer when we're in redo-only mode on PageServer, so
make execution of that function conditional on us not running in
pageserver walredo mode.
## Problem
LFC cache entry is chunk (right now size of chunk is 1Mb). LFC
statistics shows number of chunks, but not number of used pages. And
autoscaling team wants to know how sparse LFC is:
https://neondb.slack.com/archives/C04DGM6SMTM/p1726782793595969
It is possible to obtain it from the view `select count(*) from
local_cache`.
Nut it is expensive operation, enumerating all entries in LFC under
lock.
## Summary of changes
This PR added "file_cache_used_pages" to `neon_lfc_stats` view:
```
select * from neon_lfc_stats;
lfc_key | lfc_value
-----------------------+-----------
file_cache_misses | 3139029
file_cache_hits | 4098394
file_cache_used | 1024
file_cache_writes | 3173728
file_cache_size | 1024
file_cache_used_pages | 25689
(6 rows)
```
Please notice that this PR doesn't change neon extension API, so no need
to create new version of Neon extension.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The metrics include a histogram of how long we need to wait for a
GetPage request, number of reconnects, and number of requests among
other things.
The metrics are not yet exported anywhere, but you can query them
manually.
Note: This does *not* bump the default version of the 'neon' extension. We
will do that later, as a separate PR. The reason is that this allows us to roll back
the compute image smoothly, if necessary. Once the image that includes the
new extension .so file with the new functions has been rolled out, and we're
confident that we don't need to roll back the image anymore, we can change
default extension version and actually start using the new functions and views.
This is what the view looks like:
```
postgres=# select * from neon_perf_counters ;
metric | bucket_le | value
---------------------------------------+-----------+----------
getpage_wait_seconds_count | | 300
getpage_wait_seconds_sum | | 0.048506
getpage_wait_seconds_bucket | 2e-05 | 0
getpage_wait_seconds_bucket | 3e-05 | 0
getpage_wait_seconds_bucket | 6e-05 | 71
getpage_wait_seconds_bucket | 0.0001 | 124
getpage_wait_seconds_bucket | 0.0002 | 248
getpage_wait_seconds_bucket | 0.0003 | 279
getpage_wait_seconds_bucket | 0.0006 | 297
getpage_wait_seconds_bucket | 0.001 | 298
getpage_wait_seconds_bucket | 0.002 | 298
getpage_wait_seconds_bucket | 0.003 | 298
getpage_wait_seconds_bucket | 0.006 | 300
getpage_wait_seconds_bucket | 0.01 | 300
getpage_wait_seconds_bucket | 0.02 | 300
getpage_wait_seconds_bucket | 0.03 | 300
getpage_wait_seconds_bucket | 0.06 | 300
getpage_wait_seconds_bucket | 0.1 | 300
getpage_wait_seconds_bucket | 0.2 | 300
getpage_wait_seconds_bucket | 0.3 | 300
getpage_wait_seconds_bucket | 0.6 | 300
getpage_wait_seconds_bucket | 1 | 300
getpage_wait_seconds_bucket | 2 | 300
getpage_wait_seconds_bucket | 3 | 300
getpage_wait_seconds_bucket | 6 | 300
getpage_wait_seconds_bucket | 10 | 300
getpage_wait_seconds_bucket | 20 | 300
getpage_wait_seconds_bucket | 30 | 300
getpage_wait_seconds_bucket | 60 | 300
getpage_wait_seconds_bucket | 100 | 300
getpage_wait_seconds_bucket | Infinity | 300
getpage_prefetch_requests_total | | 69
getpage_sync_requests_total | | 231
getpage_prefetch_misses_total | | 0
getpage_prefetch_discards_total | | 0
pageserver_requests_sent_total | | 323
pageserver_requests_disconnects_total | | 0
pageserver_send_flushes_total | | 323
file_cache_hits_total | | 0
(39 rows)
```
Part of https://github.com/neondatabase/neon/issues/8002
Close https://github.com/neondatabase/neon/issues/8920
Legacy compaction (as well as gc-compaction) rely on the GC process to
remove unused layer files, but this relies on many factors (i.e., key
partition) to ensure data in a dropped table can be eventually removed.
In gc-compaction, we consider the keyspace information when doing the
compaction process. If a key is not in the keyspace, we will skip that
key and not include it in the final output.
However, this is not easy to implement because gc-compaction considers
branch points (i.e., retain_lsns) and the retained keyspaces could
change across different LSNs. Therefore, for now, we only remove aux v1
keys in the compaction process.
## Summary of changes
* Add `FilterIterator` to filter out keys.
* Integrate `FilterIterator` with gc-compaction.
* Add `collect_gc_compaction_keyspace` for a spec of keyspaces that can
be retained during the gc-compaction process.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Not used in production, but in benchmarks, to demonstrate minimal RTT.
(It would be nice to not have to copy the 8KiB of zeroes, but, that
would require larger protocol changes).
Found this useful in investigation
https://github.com/neondatabase/neon/pull/8952.
## Problem
Previously, the storage controller may send compute notifications
containing stale pageservers (i.e. pageserver serving the shard was
detached). This happened because detaches did not update the compute
hook state.
## Summary of Changes
Update compute hook state on shard detach.
Fixes#8928
These were not referenced in any of the other Cargo.toml files in the
workspace. They were not being built because of that, so there was
little harm in having them listed, but let's be tidy.
cargo update ciborium iana-time-zone lazy_static schannel uuid
cargo update hyper@0.14
cargo update --precise 2.9.7 ureq
It might be worthwhile just update all our dependencies at some point,
but this is aimed at pruning the dependency tree, to make the build a
little faster. That's also why I didn't update ureq to the latest
version: that would've added a dependency to yet another version of
rustls.
We frequently mess up our submodule references. This adds one safeguard:
it checks that the submodule references are only updated "forwards", not
to some older commit, or a commit that's not a descended of the previous
one.
As next step, I'm thinking that we should automate things so that when
you merge a PR to the 'neon' repository that updates the submodule
references, the REL_*_STABLE_neon branches are automatically updated to
match the submodule references. That way, you never need to manually
merge PRs in the postgres repository, it's all triggered from commits in
the 'neon' repository. But that's not included here.
Moves the per-timeline code to load timeline metadata into a new
dedicated function called `load_timeline_metadata`. The old
`load_timeline_metadata` becomes `load_timelines_metadata`.
Split out of #8907
Part of #8088
If the primary is started at an LSN within the first of a 16 MB WAL
segment, the "long XLOG page header" at the beginning of the segment was
not initialized correctly. That has gone unnnoticed, because under
normal circumstances, nothing looks at the page header. The WAL that is
streamed to the safekeepers starts at the new record's LSN, not at the
beginning of the page, so that bogus page header didn't propagate
elsewhere, and a primary server doesn't normally read the WAL its
written. Which is good because the contents of the page would be bogus
anyway, as it wouldn't contain any of the records before the LSN where
the new record is written.
Except that in the following cases a primary does read its own WAL:
1. When there are two-phase transactions in prepared state at
checkpoint. The checkpointer reads the two-phase state from the
XLOG_XACT_PREPARE record, and writes it to a file in pg_twophase/.
2. Logical decoding reads the WAL starting from the replication slot's
restart LSN.
This PR fixes the problem with two-phase transactions. For that, it's
sufficient to initialize the page header correctly. The checkpointer
only needs to read XLOG_XACT_PREPARE records that were generated after
the server startup, so it's still OK that older WAL is missing / bogus.
I have not investigated if we have a problem with logical decoding,
however. Let's deal with that separately.
Special thanks to @Lzjing-1997, who independently found the same bug
and opened a PR to fix it, although I did not use that PR.
storage hotfix release 2024-09-20
This storage hotfix release adds valuable metrics to pageserver.
We will only deploy this hotfix manually to a dedicated pageserver that is currently empty.
Context https://neondb.slack.com/archives/C07MU9ES6NP/p1726827244185729
Created using
```
git switch -c releases/2024-09-20-hotfix
git reset --hard origin/release
git merge ec5dce04eb
```
## Problem
When layer visibility was added, an info log was included for the
situation where actual access to a layer disagrees with the visibility
calculation. This situation is safe, but I was interested in seeing when
it happens.
The log is pretty high volume, so this PR refines it to fire less often.
## Summary of changes
- For cases where accessing non-visible layers is normal, don't log at
all.
- Extend a unit test to increase confidence that the updates to
visibility on access are working as expected
- During compaction, only call the visibility calculation routine if
some image layers were created: previously, frequent calls resulted in
the visibility of layers getting reset every time we passed through
create_image_layers.
## Problem
Seems that PS might be too eager in reporting throttled tasks
## Summary of changes
Introduce a sleep counter. If the sleep counter increases, then the
acquire tasks was throttled.
close https://github.com/neondatabase/neon/issues/8903
In https://github.com/neondatabase/neon/issues/8903 we observed JSON
decoding error to have the following error message in the log:
```
Error processing HTTP request: Resource temporarily unavailable: 3956 (pageserver-6.ap-southeast-1.aws.neon.tech) error receiving body: error decoding response body
```
This is hard to understand. In this patch, we make the error message
more reasonable.
## Summary of changes
* receive body error is now an internal server error, passthrough the
`reqwest::Error` (only decoding error) as `anyhow::Error`.
* instead of formatting the error using `to_string`, we use the
alternative `anyhow::Error` formatting, so that it prints out the cause
of the error (i.e., what exactly cannot serde decode).
I would expect seeing something like `error receiving body: error
decoding response body: XXX field not found` after this patch, though I
didn't set up a testing environment to observe the exact behavior.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
It's pretty expensive to run, and there is very little difference
between debug and release builds that could lead to different clippy
warnings.
This is extracted from PR #8912. That PR wandered off into various
improvements we could make, but we seem to have consensus on this part
at least.
## Problem
Safekeeper's OpenAPI spec is incorrect:
```
Semantic error at paths./v1/tenant/{tenant_id}/timeline/{timeline_id}.get.responses.404.content.application/json.schema.$ref
$refs must reference a valid location in the document
Jump to line 126
```
Checked on https://editor.swagger.io
## Summary of changes
- Add `NotFoundError`
- Add `description` and `license` fields to make Cloud OpenAPI spec
linter happy
We have 3 places where we implement layer map checks.
## Summary of changes
Now we have a single check function being called in all places.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Part of #7497, closes https://github.com/neondatabase/neon/issues/8890.
## Problem
Since leases are in-memory objects, we need to take special care of them
after pageserver restarts and while doing a live migration. The approach
we took for pageserver restart is to wait for at least lease duration
before doing first GC. We want to do the same for live migration. Since
we do not do any GC when a tenant is in `AttachedStale` or
`AttachedMulti` mode, only the transition from `AttachedMulti` to
`AttachedSingle` requires this treatment.
## Summary of changes
- Added `lsn_lease_deadline` field in `GcBlock::reasons`: the tenant is
temporarily blocked from GC until we reach the deadline. This
information does not persist to S3.
- In `GCBlock::start`, skip the GC iteration if we are blocked by the
lsn lease deadline.
- In `TenantManager::upsert_location`, set the lsn_lease_deadline to
`Instant::now() + lsn_lease_length` so the granted leases have a chance
to be renewed before we run GC for the first time after transitioned
from AttachedMulti to AttachedSingle.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
misc changes split out from #8855
- **allow cloning the request context in a read-only fashion for
background tasks**
- **propagate endpoint and request context through the jwk cache**
- **only allow password based auth for md5 during testing**
- **remove auth info from conn info**
https://github.com/neondatabase/neon/pull/9028 changed the image layer
creation log into trace level. However, I personally find logging image
layer creation useful when reading the logs -- it makes it clear that
the image layer creation is happening and gives a clear idea of the
progress. Therefore, I propose to continue logging them for
create_image_layers set of functions.
## Summary of changes
* Add info logging for all image layers created in legacy compaction.
* Add info logging for all layers creation in testing functions.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Different keyspaces may require different floor LSNs in vectored
delta layer visits. This patch adds support for such cases.
## Summary of changes
Different keyspaces wishing to read the same layer might
require different stop lsns (or lsn floor). The start LSN
of the read (or the lsn ceil) will always be the same.
With this observation, we fix skipping of image layers by
indexing the fringe by layer id plus lsn floor.
This is very simple, but means that we can visit delta layers twice
in certain cases. Still, I think it's very unlikely for any extra
merging to have taken place in this case, so perhaps it makes sense to go
with the simpler patch.
Fixes https://github.com/neondatabase/neon/issues/9012
Alternative to https://github.com/neondatabase/neon/pull/9025
This constant in 'tenant_conf_defaults' was unused, but there's
another constant with the same name in the global 'defaults'. I wish
the setting was configurable per-tenant, but it isn't, so let's remove
the confusing duplicate.
The DEFAULT_CONCURRENT_TENANT_SIZE_LOGICAL_SIZE_QUERIES constant was
unused, because we had just hardcoded it to 1 where the constant
should've been used.
Remove the ConfigurableSemaphore::Default implementation, since it was
unused.
There's some more code that still checks for uninit and delete
markers, see callers of is_delete_mark and is_uninit_mark, and github
issue #5718. But these functions were outright dead.
Dead code is generally useless, but with Postgres constants in
particular, I'm also worried that if they're not used anywhere, we
might fail to update them at a Postgres version update, and get very
confused later when they have wrong values.
When I checked the log in Grafana I couldn't find the scrubber version.
Then I realized that it should be logged after the logger gets
initialized.
## Summary of changes
Log after initializing the logger for the scrubber.
Signed-off-by: Alex Chi Z <chi@neon.tech>
(Found this useful during investigation
https://github.com/neondatabase/cloud/issues/16886.)
Problem
-------
Before this PR, `neon_local` sequentially does the following:
1. launch storcon process
2. wait for storcon to signal readiness
[here](75310fe441/control_plane/src/storage_controller.rs (L804-L808))
3. start pageserver
4. wait for pageserver to become ready
[here](c43e664ff5/control_plane/src/pageserver.rs (L343-L346))
5. etc
The problem is that storcon's readiness waits for the
[`startup_reconcile`](cbcd4058ed/storage_controller/src/service.rs (L520-L523))
to complete.
But pageservers aren't started at this point.
So, worst case we wait for `STARTUP_RECONCILE_TIMEOUT/2`, i.e., 15s.
This is more than the 10s default timeout allowed by neon_local.
So, the result is that `neon_local start` fails to start storcon and
stops everything.
Solution
--------
In this PR I choose the the radical solution to start everything in
parallel.
It junks up the output because we do stuff like `print!(".")` to
indicate progress.
We should just abandon that.
And switch to `utils::logging` + `tracing` with separate spans for each
component.
I can do that in this PR or we leave it as a follow-up.
Alternatives Considered
-----------------------
The Pageserver's `/v1/status` or in fact any endpoint of the mgmt API
will not `accept()` on the mgmt API socket until after the `re-attach`
call to storcon returned success.
So, it's insufficient to change the startup order to start Pageservers
first.
We cannot easily change Pageserver startup order because
`init_tenant_mgr` must complete before we start serving the mgmt API.
Otherwise tenant detach calls et al can race with `init_tenant_mgr`.
We'd have to add a "loading" state to tenant mgr and make all API
endpoints except `/v1/status` wait for _that_ to complete.
Related
-------
- https://github.com/neondatabase/neon/pull/6475
## Problem
It turns out the previous approach (with `skip_if` input) doesn't work
(from https://github.com/neondatabase/neon/pull/9017).
Revert it and use more straightforward if-conditions
## Summary of changes
- Revert efbe8db7f1
- Add if-condition to`promote-compatibility-data` job and relevant
comments
Commit ca5390a89d made a similar change to DeltaLayerWriter.
We bumped into this with Stas with our hackathon project, to create a
standalong program to create image layers directly from a Postgres data
directory. It needs to create image layers without having a Timeline and
other pageserver machinery.
This downgrades the "created image layer {}" message from INFO to TRACE
level. TRACE is used for the corresponding message on delta layer
creation too. The path logged in the message is now the temporary path,
before the file is renamed to its final name. Again commit ca5390a89d
made the same change for the message on delta layer creation.
There's currently no way to just start/stop broker from `neon_local`.
This PR
* adds a sub-command
* uses that sub-command from the test suite instead of the pre-existing
Python `subprocess` based approach.
Found this useful during investigation
https://github.com/neondatabase/cloud/issues/16886.
## Problem
We do use `actions/checkout` with `fetch-depth: 0` when it's not
required
## Summary of changes
- Remove unneeded `fetch-depth: 0`
- Add a comment if `fetch-depth: 0` is required
We added another migration in 5876c441ab,
but didn't bump this value. This had no effect, but best to fix it
anyway.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We've got 2 non-blocking failures on the release pipeline:
- `promote-compatibility-data` job got skipped _presumably_ because one
of the dependencies of `deploy` job (`push-to-acr-dev`) got skipped
(https://github.com/neondatabase/neon/pull/8940)
- `coverage-report` job fails because we don't build debug artifacts in
the release branch (https://github.com/neondatabase/neon/pull/8561)
## Summary of changes
- Always run `push-to-acr-dev` / `push-to-acr-prod` jobs, but add
`skip_if` parameter to the reusable workflow, which can skip the job
internally, without skipping externally
- Do not run `coverage-report` on release branches
## Problem
It turns out that we can't rely on external orchestration to promptly
route trafic to the new leader. This is downtime inducing.
Forwarding provides a safe way out.
## Safety
We forward when:
1. Request is not one of ["/control/v1/step_down", "/status", "/ready",
"/metrics"]
2. Current instance is in [`LeadershipStatus::SteppedDown`] state
3. There is a leader in the database to forward to
4. Leader from step (3) is not the current instance
If a storcon instance is persisted in the database, then we know that it
is the current leader.
There's one exception: time between handling step-down request and the
new leader updating the
database.
Let's treat the happy case first. The stepped down node does not produce
any side effects,
since all request handling happens on the leader.
As for the edge case, we are guaranteed to always have a maximum of two
running instances.
Hence, if we are in the edge case scenario the leader persisted in the
database is the
stepped down instance that received the request. Condition (4) above
covers this scenario.
## Summary of changes
* Conversion utilities for reqwest <-> hyper. I'm not happy with these,
but I don't see a better way. Open to suggestions.
* Add request forwarding logic
* Update each request handler. Again, not happy with this. If anyone
knows a nice to wrap the handlers, lmk. Me and Joonas tried :/
* Update each handler to maybe forward
* Tweak tests to showcase new behaviour
pg_distrib_dir doesn't include the Postgres version and only depends
on env variables which cannot change during a test run, so it can be
marked as session-scoped. Similarly, the platform cannot change during
a test run.
There was another copy of it in utils.py. The only difference is that
the version in utils.py tolerates files that are concurrently
removed. That seems fine for the few callers in neon_fixtures.py too.
This should generally be faster when running tests, especially those
that run with higher scales.
Ignoring test_lfc_resize since it seems like we are hitting a query
timeout for some reason that I have yet to investigate. A little bit of
improvemnt is better than none.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
`gather-rust-build-stats` extra CI job fails with
```
"PQ_LIB_DIR" doesn't exist in the configured path: "/__w/neon/neon/pg_install/v16/lib"
```
## Summary of changes
- Use the path to Postgres 17 for the `gather-rust-build-stats` job.
The job uses Postgres built by `make walproposer-lib`
Most extensions are not required to run Neon-based PostgreSQL, but the
Neon extension is _quite_ critical, so let's make sure we include it.
## Problem
Staging doesn't have working compute images for PG17
## Summary of changes
Disable some PG17 filters so that we get the critical components into the PG17 image
This adds preliminary PG17 support to Neon, based on RC1 / 2024-09-04
07b828e9d4
NOTICE: The data produced by the included version of the PostgreSQL fork
may not be compatible with the future full release of PostgreSQL 17 due to
expected or unexpected future changes in magic numbers and internals.
DO NOT EXPECT DATA IN V17-TENANTS TO BE COMPATIBLE WITH THE 17.0
RELEASE!
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Merge main into release with merge commit.
This is a no-op PR which will incorporate into release branch last commits from main under their original SHA to prevent merge conflicts when doing release.
Noticed this while debugging a test failure in #8673 which only occurs
with real S3 instead of mock S3: if you authenticate to S3 via
`AWS_PROFILE`, then it requires the `HOME` env var to be set so that it
can read inside the `~/.aws` directory.
The scrubber abstraction `StorageScrubber::scrubber_cli` in
`neon_fixtures.py` would otherwise not work. My earlier PR #6556 has
done similar things for the `neon_local` wrapper.
You can try:
```
aws sso login --profile dev
export ENABLE_REAL_S3_REMOTE_STORAGE=y REMOTE_STORAGE_S3_BUCKET=neon-github-ci-tests REMOTE_STORAGE_S3_REGION=eu-central-1 AWS_PROFILE=dev
RUST_BACKTRACE=1 BUILD_TYPE=debug DEFAULT_PG_VERSION=16 ./scripts/pytest -vv --tb=short -k test_scrubber_tenant_snapshot
```
before and after this patch: this patch fixes it.
## Problem
This page had many dead links, and was confusing for folks looking for
documentation about our product.
Closes: https://github.com/neondatabase/neon/issues/8535
## Summary of changes
- Add a link to the product docs up top
- Remove dead/placeholder links
## Problem
We install and try to use `cachepot`. But it is not configured correctly
and doesn't work (after https://github.com/neondatabase/neon/pull/2290)
## Summary of changes
- Remove `cachepot`
## Problem
Migrations of tenant shards with cold secondaries are holding up drains
in during production deployments.
## Summary of changes
If a secondary locations is lagging by more than 256MiB (configurable,
but that's the default), then skip cutting it over to the secondary as part of the node drain.
## Problem
This type of error can happen during shutdown & was triggering a circuit
breaker alert.
## Summary of changes
- Map NotIntialized::Stopped to CompactionError::ShuttingDown, so that
we may handle it cleanly
## Problem
Azure login fails in `pin-build-tools-image` workflow because the job
doesn't have the required permissions.
```
Error: Please make sure to give write permissions to id-token in the workflow.
Error: Login failed with Error: Error message: Unable to get ACTIONS_ID_TOKEN_REQUEST_URL env variable. Double check if the 'auth-type' is correct. Refer to https://github.com/Azure/login#readme for more information.
```
## Summary of changes
- Add `id-token: write` permission to `pin-build-tools-image`
- Add an input to force image tagging
- Unify pushing to Docker Hub with other registries
- Split the job into two to have less if's
part of https://github.com/neondatabase/neon/issues/8653
Disable create tablespace stmt. It turns out it requires much less
effort to do the regress test mode flag than patching the test cases,
and given that we might need to support tablespaces in the future, I
decided to add a new flag `regress_test_mode` to change the behavior of
create tablespace.
Tested manually that without setting regress_test_mode, create
tablespace will be rejected.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
This reverts #8076 - which was already reverted from the release branch
since forever (it would have been a breaking change to release for all
users who currently set TimeZone options). It's causing conflicts now so
we should revert it here as well.
## Problem
Latency from one cloud provider to another one is higher than within the
same cloud provider.
Some of our benchmarks are latency sensitive - we run a pgbench or psql
in the github action runner and the system under test is running in Neon
(database project).
For realistic perf tps and latency results we need to compare apples to
apples and run the database client in the same "latency distance" for
all tests.
## Summary of changes
Move job steps that test Neon databases deployed on Azure into Azure
action runners.
- bench strategy variant using azure database
- pgvector strategy variant using azure database
- pgbench-compare strategy variants using azure database
## Test run
https://github.com/neondatabase/neon/actions/runs/10314848502
## Problem
We're adding more third party dependencies to support more diverse +
realistic test cases in `test_runner/logical_repl`. I ❤️ these
tests, they are a good thing.
The slight glitch is that python packaging is hard, and some third party
python packages have issues. For example the current kafka dependency
doesn't work on latest python. We can mitigate that by only importing
these more specialized dependencies in the tests that use them.
## Summary of changes
- Move the `kafka` import into a test body, so that folks running the
regular `test_runner/regress` tests don't have to have a working kafka
client package.
## Problem
This code was to mitigate risk in
https://github.com/neondatabase/neon/pull/8427
As expected, we did not hit this code path - the new continuous updates
of gc_info are working fine, we can remove this code now.
## Summary of changes
- Remove block that double-checks retain_lsns
avoid "leaking" the completions of BackgroundPurges by:
1. switching it to TaskTracker for provided close+wait
2. stop using tokio::fs::remove_dir_all which will consume two units of
memory instead of one blocking task
Additionally, use more graceful shutdown in tests which do actually some
background cleanup.
## Problem
See
https://neondb.slack.com/archives/C03QLRH7PPD/p1723038557449239?thread_ts=1722868375.476789&cid=C03QLRH7PPD
Logical replication subscription by default use `synchronous_commit=off`
which cause problems with safekeeper
## Summary of changes
Set `synchronous_commit=on` for logical replication subscription in
test_subscriber_restart.py
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
Some developers build on MacOS, which doesn't have io_uring.
## Summary of changes
- Add `io_engine_for_bench`, which on linux will give io_uring or panic
if it's unavailable, and on MacOS will always panic.
We do not want to run such benchmarks with StdFs: the results aren't
interesting, and will actively waste the time of any developers who
start investigating performance before they realize they're using a
known-slow I/O backend.
Why not just conditionally compile this benchmark on linux only? Because
even on linux, I still want it to refuse to run if it can't get
io_uring.
Part of #8130, [RFC: Direct IO For Pageserver](https://github.com/neondatabase/neon/blob/problame/direct-io-rfc/docs/rfcs/034-direct-io-for-pageserver.md)
## Description
Add pageserver config for evaluating/enabling direct I/O.
- Disabled: current default, uses buffered io as is.
- Evaluate: still uses buffered io, but could do alignment checking and
perf simulation (pad latency by direct io RW to a fake file).
- Enabled: uses direct io, behavior on alignment error is configurable.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Earlier I was thinking we'd need a (ancestor_lsn, timeline_id) ordered
list of reparented. Turns out we did not need it at all. Replace it with
an unordered hashset. Additionally refactor the reparented direct
children query out, it will later be used from more places.
Split off from #8430.
Cc: #6994
Ephemeral files cleanup on drop but did not delay shutdown, leading to
problems with restarting the tenant. The solution is as proposed:
- make ephemeral files carry the gate guard to delay `Timeline::gate`
closing
- flush in-memory layers and strong references to those on
`Timeline::shutdown`
The above are realized by making LayerManager an `enum` with `Open` and
`Closed` variants, and fail requests to modify `LayerMap`.
Additionally:
- fix too eager anyhow conversions in compaction
- unify how we freeze layers and handle errors
- optimize likely_resident_layers to read LayerFileManager hashmap
values instead of bouncing through LayerMap
Fixes: #7830
## Problem
1. Hard to correlate startup parameters with the endpoint that provided
them.
2. Some configurations are not needed in the `ProxyConfig` struct.
## Summary of changes
Because of some borrow checker fun, I needed to switch to an
interior-mutability implementation of our `RequestMonitoring` context
system. Using https://docs.rs/try-lock/latest/try_lock/ as a cheap lock
for such a use-case (needed to be thread safe).
Removed the lock of each startup message, instead just logging only the
startup params in a successful handshake.
Also removed from values from `ProxyConfig` and kept as arguments.
(needed for local-proxy config)
Timeline cancellation running in parallel with gc yields error log lines
like:
```
Gc failed 1 times, retrying in 2s: TimelineCancelled
```
They are completely harmless though and normal to occur. Therefore, only
print those messages at an info level. Still print them at all so that
we know what is going on if we focus on a single timeline.
Part of #8128.
## Problem
Currently, scrubber `scan_metadata` command will return with an error
code if the metadata on remote storage is corrupted with fatal errors.
To safely deploy this command in a cronjob, we want to differentiate
between failures while running scrubber command and the erroneous
metadata. At the same time, we also want our regression tests to catch
corrupted metadata using the scrubber command.
## Summary of changes
- Return with error code only when the scrubber command fails
- Uses explicit checks on errors and warnings to determine metadata
health in regression tests.
**Resolve conflict with `tenant-snapshot` command (after shard split):**
[`test_scrubber_tenant_snapshot`](https://github.com/neondatabase/neon/blob/yuchen/scrubber-scan-cleanup-before-prod/test_runner/regress/test_storage_scrubber.py#L23)
failed before applying 422a8443dd
- When taking a snapshot, the old `index_part.json` in the unsharded
tenant directory is not kept.
- The current `list_timeline_blobs` implementation consider no
`index_part.json` as a parse error.
- During the scan, we are only analyzing shards with highest shard
count, so we will not get a parse error. but we do need to add the
layers to tenant object listing, otherwise we will get index is
referencing a layer that is not in remote storage error.
- **Action:** Add s3_layers from `list_timeline_blobs` regardless of
parsing error
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
We lack a rust bench for the inmemory layer and delta layer write paths:
it is useful to benchmark these components independent of postgres & WAL
decoding.
Related: https://github.com/neondatabase/neon/issues/8452
## Summary of changes
- Refactor DeltaLayerWriter to avoid carrying a Timeline, so that it can
be cleanly tested + benched without a Tenant/Timeline test harness. It
only needed the Timeline for building `Layer`, so this can be done in a
separate step.
- Add `bench_ingest`, which exercises a variety of workload "shapes"
(big values, small values, sequential keys, random keys)
- Include a small uncontroversial optimization: in `freeze`, only
exhaustively walk values to assert ordering relative to end_lsn in debug
mode.
These benches are limited by drive performance on a lot of machines, but
still useful as a local tool for iterating on CPU/memory improvements
around this code path.
Anecdotal measurements on Hetzner AX102 (Ryzen 7950xd):
```
ingest-small-values/ingest 128MB/100b seq
time: [1.1160 s 1.1230 s 1.1289 s]
thrpt: [113.38 MiB/s 113.98 MiB/s 114.70 MiB/s]
Found 1 outliers among 10 measurements (10.00%)
1 (10.00%) low mild
Benchmarking ingest-small-values/ingest 128MB/100b rand: Warming up for 3.0000 s
Warning: Unable to complete 10 samples in 10.0s. You may wish to increase target time to 18.9s.
ingest-small-values/ingest 128MB/100b rand
time: [1.9001 s 1.9056 s 1.9110 s]
thrpt: [66.982 MiB/s 67.171 MiB/s 67.365 MiB/s]
Benchmarking ingest-small-values/ingest 128MB/100b rand-1024keys: Warming up for 3.0000 s
Warning: Unable to complete 10 samples in 10.0s. You may wish to increase target time to 11.0s.
ingest-small-values/ingest 128MB/100b rand-1024keys
time: [1.0715 s 1.0828 s 1.0937 s]
thrpt: [117.04 MiB/s 118.21 MiB/s 119.46 MiB/s]
ingest-small-values/ingest 128MB/100b seq, no delta
time: [425.49 ms 429.07 ms 432.04 ms]
thrpt: [296.27 MiB/s 298.32 MiB/s 300.83 MiB/s]
Found 1 outliers among 10 measurements (10.00%)
1 (10.00%) low mild
ingest-big-values/ingest 128MB/8k seq
time: [373.03 ms 375.84 ms 379.17 ms]
thrpt: [337.58 MiB/s 340.57 MiB/s 343.13 MiB/s]
Found 1 outliers among 10 measurements (10.00%)
1 (10.00%) high mild
ingest-big-values/ingest 128MB/8k seq, no delta
time: [81.534 ms 82.811 ms 83.364 ms]
thrpt: [1.4994 GiB/s 1.5095 GiB/s 1.5331 GiB/s]
Found 1 outliers among 10 measurements (10.00%)
```
## Problem
Sometimes, a layer is Covered by hasn't yet been evicted from local disk
(e.g. shortly after image layer generation). It is not good use of
resources to download these to a secondary location, as there's a good
chance they will never be read.
This follows the previous change that added layer visibility:
- #8511
Part of epic:
- https://github.com/neondatabase/neon/issues/8398
## Summary of changes
- When generating heatmaps, only include Visible layers
- Update test_secondary_downloads to filter to visible layers when
listing layers from an attached location
## Problem
In staging, we could see that occasionally tenants were wrapping their
pageserver_visible_physical_size metric past zero to 2^64.
This is harmless right now, but will matter more later when we start
using visible size in things like the /utilization endpoint.
## Summary of changes
- Add debug asserts that detect this case. `test_gc_of_remote_layers`
works as a reproducer for this issue once the asserts are added.
- Tighten up the interface around access_stats so that only Layer can
mutate it.
- In Layer, wrap calls to `record_access` in code that will update the
visible size statistic if the access implicitly marks the layer visible
(this was what caused the bug)
- In LayerManager::rewrite_layers, use the proper set_visibility layer
function instead of directly using access_stats (this is an additional
path where metrics could go bad.)
- Removed unused instances of LayerAccessStats in DeltaLayer and
ImageLayer which I noticed while reviewing the code paths that call
record_access.
## Problem
The controller scale test does random migrations. These mutate secondary
locations, and therefore can cause secondary optimizations to happen in
the background, violating the test's expectation that consistency_check
will work as there are no reconciliations running.
Example:
https://neon-github-public-dev.s3.amazonaws.com/reports/main/10247161379/index.html#suites/07874de07c4a1c9effe0d92da7755ebf/6316beacd3fb3060/
## Summary of changes
- Only migrate to existing secondary locations, not randomly picked
nodes, so that we can do a fast reconcile_until_idle (otherwise
reconcile_until_idle is takes a long time to create new secondary
locations).
- Do a reconcile_until_idle before consistency_check.
## Problem
We need to test the logical replication with some external consumers.
## Summary of changes
A test of the logical replication with Debezium as a consumer was added.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
We don't use it for packaging, and 'poetry install' will soon error
otherwise. Also remove name and version fields as these are not required for
non-packaging mode.
#8600 missed the hunk changing index_part.json informative version.
Include it in this PR, in addition add more non-warning index_part.json
versions to scrubber.
## Problem
We have been maintaining two read paths (legacy and vectored) for a
while now. The legacy read-path was only used for cross validation in some tests.
## Summary of changes
* Tweak all tests that were using the legacy read path to use the
vectored read path instead
* Remove the read path dispatching based on the pageserver configs
* Remove the legacy read path code
We will be able to remove the single blob io code in
`pageserver/src/tenant/blob_io.rs` when https://github.com/neondatabase/neon/issues/7386 is complete.
Closes https://github.com/neondatabase/neon/issues/8005
Currently, we do not have facilities to persistently block GC on a
tenant for whatever reason. We could do a tenant configuration update,
but that is risky for generation numbers and would also be transient.
Introduce a `gc_block` facility in the tenant, which manages per
timeline blocking reasons.
Additionally, add HTTP endpoints for enabling/disabling manual gc
blocking for a specific timeline. For debugging, individual tenant
status now includes a similar string representation logged when GC is
skipped.
Cc: #6994
Add dry-run mode that does not produce any image layer + delta layer. I
will use this code to do some experiments and see how much space we can
reclaim for tenants on staging. Part of
https://github.com/neondatabase/neon/issues/8002
* Add dry-run mode that runs the full compaction process without
updating the layer map. (We never call finish on the writers and the
files will be removed before exiting the function).
* Add compaction statistics and print them at the end of compaction.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
> Currently, long-running LR tests recreate endpoints every night. We'd
like to have along-running buildup of history to exercise the pageserver
in this case (instead of "unit-testing" the same behavior everynight).
Closes#8317
## Summary of changes
- Update Postgres version for replication tests
- Set `BENCHMARK_PROJECT_ID_PUB`/`BENCHMARK_PROJECT_ID_SUB` env vars to
projects that were created for this purpose
---------
Co-authored-by: Sasha Krassovsky <krassovskysasha@gmail.com>
Currently if `GET
/v1/tenant/x/timeline/y?force-await-initial-logical-size=true` is
requested for a root timeline created within the current pageserver
session, the request handler panics hitting the debug assertion. These
timelines will always have an accurate (at initdb import) calculated
logical size. Fix is to never attempt prioritizing timeline size
calculation if we already have an exact value.
Split off from #8528.
## Problem
In some cases, a deadlock between `build-and-test` and
`trigger-e2e-tests` workflows can happen:
```
Build and Test
Canceling since a deadlock for concurrency group 'Build and Test-8600/merge-anysha' was detected between 'top level workflow' and 'trigger-e2e-tests'
```
I don't understand the reason completely, probably `${{ github.workflow
}}` got evaluated to the same value and somehow caused the issue.
We don't need to limit concurrency for `trigger-e2e-tests`
workflow.
See
https://neondb.slack.com/archives/C059ZC138NR/p1722869486708179?thread_ts=1722869027.960029&cid=C059ZC138NR
## Problem
We don't trigger e2e tests for draft PRs, but we do trigger them once a
PR is in the "Ready for review" state.
Sometimes, a PR can be marked as "Ready for review" before we finish
image building. In such cases, triggering e2e tests fails.
## Summary of changes
- Make `trigger-e2e-tests` job poll status of `promote-images` job from
the build-and-test workflow for the last commit. And trigger only if the
status is `success`
- Remove explicit image checking from the workflow
- Add `concurrency` for `triggere-e2e-tests` workflow to make it
possible to cancel jobs in progress (if PR moves from "Draft" to "Ready
for review" several times in a row)
## Problem
PR #7992 was merged without correspondent changes in Postgres submodules
and this is why test_oid_overflow.py is failed now.
## Summary of changes
Bump Postgres versions
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
There is an unused safekeeper option `partial_backup_enabled`.
`partial_backup_enabled` was implemented in #6530, but this option was
always turned into enabled in #8022.
If you intended to keep this option for a specific reason, I will close
this PR.
## Summary of changes
I removed an unused safekeeper option `partial_backup_enabled`.
We've noticed increased memory usage with the latest release. Drain the
joinset of `page_service` connection handlers to avoid leaking them
until shutdown. An alternative would be to use a TaskTracker.
TaskTracker was not discussed in original PR #8339 review, so not hot
fixing it in here either.
part of https://github.com/neondatabase/neon/issues/8002
## Summary of changes
Add a `SplitImageWriter` that automatically splits image layer based on
estimated target image layer size. This does not consider compression
and we might need a better metrics.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
We need both compaction and gc lock for gc-compaction. The lock order
should be the same everywhere, otherwise there could be a deadlock where
A waits for B and B waits for A.
We also had a double-lock issue. The compaction lock gets acquired in
the outer `compact` function. Note that the unit tests directly call
`compact_with_gc`, and therefore not triggering the issue.
## Summary of changes
Ensure all places acquire compact lock and then gc lock. Remove an extra
compact lock acqusition.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Currently, our backward compatibility tests only look one release back.
That means, for example, that when we switch on image layer compression
by default, we'll test reading of uncompressed layers for one release,
and then stop doing it. When we make an index_part.json format change,
we'll test against the old format for a week, then stop (unless we write
separate unit tests for each old format).
The reality in the field is that data in old formats will continue to
exist for weeks/months/years. When we make major format changes, we
should retain examples of the old format data, and continuously verify
that the latest code can still read them.
This test uses contents from a new path in the public S3 bucket,
`compatibility-data-snapshots/`. It is populated by hand. The first
important artifact is one from before we switch on compression, so that
we will keep testing reads of uncompressed data. We will generate more
artifacts ahead of other key changes, like when we update remote storage
format for archival timelines.
Closes: https://github.com/neondatabase/cloud/issues/15576
This commit tries to fix regular load spikes on staging, caused by too
many eviction and partial upload operations running at the same time.
Usually it was hapenning after restart, for partial backup the load was
delayed.
- Add a semaphore for evictions (2 permits by default)
- Rename `resident_since` to `evict_not_before` and smooth out the curve
by using random duration
- Use random duration in partial uploads as well
related to https://github.com/neondatabase/neon/issues/6338
some discussion in
https://neondb.slack.com/archives/C033RQ5SPDH/p1720601531744029
Makes `flush_frozen_layer` add a barrier to the upload queue and makes
it wait for that barrier to be reached until it lets the flushing be
completed.
This gives us backpressure and ensures that writes can't build up in an
unbounded fashion.
Fixes#7317
Chaos injection bridges the gap between automated testing (where we do
lots of different things with small, short-lived tenants), and staging
(where we do many fewer things, but with larger, long-lived tenants).
This PR adds a first type of chaos which isn't really very chaotic: it's
live migration of tenants between healthy pageservers. This nevertheless
provides continuous checks that things like clean, prompt shutdown of
tenants works for realistically deployed pageservers with realistically
large tenants.
## Problem
Previously, when we do a timeline deletion, shards will delete layers
that belong to an ancestor. That is not a correctness issue, because
when we delete a timeline, we're always deleting it from all shards, and
destroying data for that timeline is clearly fine.
However, there exists a race where one shard might start doing this
deletion while another shard has not yet received the deletion request,
and might try to access an ancestral layer. This creates ambiguity over
the "all layers referenced by my index should always exist" invariant,
which is important to detecting and reporting corruption.
Now that we have a GC mode for clearing up ancestral layers, we can rely
on that to clean up such layers, and avoid deleting them right away.
This makes things easier to reason about: there are now no cases where a
shard will delete a layer that belongs to a ShardIndex other than
itself.
## Summary of changes
- Modify behavior of RemoteTimelineClient::delete_all
- Add `test_scrubber_physical_gc_timeline_deletion` to exercise this
case
- Tweak AWS SDK config in the scrubber to enable retries. Motivated by
seeing the test for this feature encounter some transient "service
error" S3 errors (which are probably nothing to do with the changes in
this PR)
## Problem
`allure_attach_from_dir` method might create `tar.zst` archives even
if `--alluredir` is not set (i.e. Allure results collection is disabled)
## Summary of changes
- Don't run `allure_attach_from_dir` if `--alluredir` is not set
part of https://github.com/neondatabase/neon/issues/8002
Due to the limitation of the current layer map implementation, we cannot
directly replace a layer. It's interpreted as an insert and a deletion,
and there will be file exist error when renaming the newly-created layer
to replace the old layer. We work around that by changing the end key of
the image layer. A long-term fix would involve a refactor around the
layer file naming. For delta layers, we simply skip layers with the same
key range produced, though it is possible to add an extra key as an
alternative solution.
* The image layer range for the layers generated from gc-compaction will
be Key::MIN..(Key..MAX-1), to avoid being recognized as an L0 delta
layer.
* Skip existing layers if it turns out that we need to generate a layer
with the same persistent key in the same generation.
Note that it is possible that the newly-generated layer has different
content from the existing layer. For example, when the user drops a
retain_lsn, the compaction could have combined or dropped some records,
therefore creating a smaller layer than the existing one. We discard the
"optimized" layer for now because we cannot deal with such rewrites
within the same generation.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We recently added a "visibility" state to layers, but nothing
initializes it.
Part of:
- #8398
## Summary of changes
- Add a dependency on `range-set-blaze`, which is used as a fast
incrementally updated alternative to KeySpace. We could also use this to
replace the internals of KeySpaceRandomAccum if we wanted to. Writing a
type that does this kind of "BtreeMap & merge overlapping entries" thing
isn't super complicated, but no reason to write this ourselves when
there's a third party impl available.
- Add a function to layermap to calculate visibilities for each layer
- Add a function to Timeline to call into layermap and then apply these
visibilities to the Layer objects.
- Invoke the calculation during startup, after image layer creations,
and when removing branches. Branch removal and image layer creation are
the two ways that a layer can go from Visible to Covered.
- Add unit test & benchmark for the visibility calculation
- Expose `pageserver_visible_physical_size` metric, which should always
be <= `pageserver_remote_physical_size`.
- This metric will feed into the /v1/utilization endpoint later: the
visible size indicates how much space we would like to use on this
pageserver for this tenant.
- When `pageserver_visible_physical_size` is greater than
`pageserver_resident_physical_size`, this is a sign that the tenant has
long-idle branches, which result in layers that are visible in
principle, but not used in practice.
This does not keep visibility hints up to date in all cases:
particularly, when creating a child timeline, any previously covered
layers will not get marked Visible until they are accessed.
Updates after image layer creation could be implemented as more of a
special case, but this would require more new code: the existing depth
calculation code doesn't maintain+yield the list of deltas that would be
covered by an image layer.
## Performance
This operation is done rarely (at startup and at timeline deletion), so
needs to be efficient but not ultra-fast.
There is a new `visibility` bench that measures runtime for a synthetic
100k layers case (`sequential`) and a real layer map (`real_map`) with
~26k layers.
The benchmark shows runtimes of single digit milliseconds (on a ryzen
7950). This confirms that the runtime shouldn't be a problem at startup
(as we already incur S3-level latencies there), but that it's slow
enough that we definitely shouldn't call it more often than necessary,
and it may be worthwhile to optimize further later (things like: when
removing a branch, only bother scanning layers below the branchpoint)
```
visibility/sequential time: [4.5087 ms 4.5894 ms 4.6775 ms]
change: [+2.0826% +3.9097% +5.8995%] (p = 0.00 < 0.05)
Performance has regressed.
Found 24 outliers among 100 measurements (24.00%)
2 (2.00%) high mild
22 (22.00%) high severe
min: 0/1696070, max: 93/1C0887F0
visibility/real_map time: [7.0796 ms 7.0832 ms 7.0871 ms]
change: [+0.3900% +0.4505% +0.5164%] (p = 0.00 < 0.05)
Change within noise threshold.
Found 4 outliers among 100 measurements (4.00%)
3 (3.00%) high mild
1 (1.00%) high severe
min: 0/1696070, max: 93/1C0887F0
visibility/real_map_many_branches
time: [4.5285 ms 4.5355 ms 4.5434 ms]
change: [-1.0012% -0.8004% -0.5969%] (p = 0.00 < 0.05)
Change within noise threshold.
```
Before, we had four versions of linux-raw-sys in our dependency graph:
```
linux-raw-sys@0.1.4
linux-raw-sys@0.3.8
linux-raw-sys@0.4.13
linux-raw-sys@0.6.4
```
now it's only two:
```
linux-raw-sys@0.4.13
linux-raw-sys@0.6.4
```
The changes in this PR are minimal. In order to get to its state one
only has to update procfs in Cargo.toml to 0.16 and do `cargo update -p
tempfile -p is-terminal -p prometheus`.
# Motivation
The working theory for hung systemd during PS deploy
(https://github.com/neondatabase/cloud/issues/11387) is that leftover
walredo processes trigger a race condition.
In https://github.com/neondatabase/neon/pull/8150 I arranged that a
clean Tenant shutdown does actually kill its walredo processes.
But many prod machines don't manage to shut down all their tenants until
the 10s systemd timeout hits and, presumably, triggers the race
condition in systemd / the Linux kernel that causes the frozen systemd
# Solution
This PR bolts on a rather ugly mechanism to shut down tenant managers
out of order 8s after we've received the SIGTERM from systemd.
# Changes
- add a global registry of `Weak<WalRedoManager>`
- add a special thread spawned during `shutdown_pageserver` that sleeps
for 8s, then shuts down all redo managers in the registry and prevents
new redo managers from being created
- propagate the new failure mode of tenant spawning throughout the code
base
- make sure shut down tenant manager results in
PageReconstructError::Cancelled so that if Timeline::get calls come in
after the shutdown, they do the right thing
## Problem
In https://github.com/neondatabase/neon/pull/8241 I've accidentally
removed `create-test-report` dependency on `benchmarks` job
## Summary of changes
- Run `create-test-report` after `benchmarks` job
Uses the newly added APIs from #8541 named `stream_tenants_generic` and
`stream_objects_with_retries` and extends them with
`list_objects_with_retries_generic` and
`stream_tenant_timelines_generic` to migrate the `find-garbage` command
of the scrubber to `GenericRemoteStorage`.
Part of https://github.com/neondatabase/neon/issues/7547
## Problem
This code was confusing, untested and covered:
- an impossible case, where intent state is AttacheStale (we never do
this)
- a rare edge case (going from AttachedMulti to Attached), which we were
not testing, and in any case the pageserver internally does the same
Tenant reset in this transition as it would do if we incremented
generation.
Closes: https://github.com/neondatabase/neon/issues/8367
## Summary of changes
- Simplify the logic to only skip incrementing the generation if the
location already has the expected generation and the exact same mode.
In some cases, we can get a negative metric for replication_delay_bytes.
My best guess from all the research I've done is that we evaluate
pg_last_wal_receive_lsn() before pg_last_wal_replay_lsn(), and that by
the time everything is said and done, the replay LSN has advanced past
the receive LSN. In this case, our lag can effectively be modeled as
0 due to the speed of the WAL reception and replay.
Since the introduction of sharding, the protocol handling loop in
`handle_pagerequests` cannot know anymore which concrete
`Tenant`/`Timeline` object any of the incoming `PagestreamFeMessage`
resolves to.
In fact, one message might resolve to one `Tenant`/`Timeline` while
the next one may resolve to another one.
To avoid going to tenant manager, we added the `shard_timelines` which
acted as an ever-growing cache that held timeline gate guards open for
the lifetime of the connection.
The consequence of holding the gate guards open was that we had to be
sensitive to every cached `Timeline::cancel` on each interaction with
the network connection, so that Timeline shutdown would not have to wait
for network connection interaction.
We can do better than that, meaning more efficiency & better
abstraction.
I proposed a sketch for it in
* https://github.com/neondatabase/neon/pull/8286
and this PR implements an evolution of that sketch.
The main idea is is that `mod page_service` shall be solely concerned
with the following:
1. receiving requests by speaking the protocol / pagestream subprotocol
2. dispatching the request to a corresponding method on the correct
shard/`Timeline` object
3. sending response by speaking the protocol / pagestream subprotocol.
The cancellation sensitivity responsibilities are clear cut:
* while in `page_service` code, sensitivity to page_service cancellation
is sufficient
* while in `Timeline` code, sensitivity to `Timeline::cancel` is
sufficient
To enforce these responsibilities, we introduce the notion of a
`timeline::handle::Handle` to a `Timeline` object that is checked out
from a `timeline::handle::Cache` for **each request**.
The `Handle` derefs to `Timeline` and is supposed to be used for a
single async method invocation on `Timeline`.
See the lengthy doc comment in `mod handle` for details of the design.
part of https://github.com/neondatabase/neon/issues/8002
For child branches, we will pull the image of the modified keys from the
parant into the child branch, which creates a full history for
generating key retention. If there are not enough delta keys, the image
won't be wrote eventually, and we will only keep the deltas inside the
child branch. We could avoid the wasteful work to pull the image from
the parent if we can know the number of deltas in advance, in the future
(currently we always pull image for all modified keys in the child
branch)
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We run regression tests on `release` & `debug` builds for each of the
three supported Postgres versions (6 in total).
With upcoming ARM support and Postgres 17, the number of jobs will jump
to 16, which is a lot.
See the internal discussion here:
https://neondb.slack.com/archives/C033A2WE6BZ/p1722365908404329
## Summary of changes
- Run `regress-tests` job in debug builds only with the latest Postgres
version
- Do not do `debug` builds on release branches
part of https://github.com/neondatabase/neon/issues/8184
# Problem
We want to bypass PS PageCache for all data block reads, but
`compact_level0_phase1` currently uses `ValueRef::load` to load the WAL
records from delta layers.
Internally, that maps to `FileBlockReader:read_blk` which hits the
PageCache
[here](e78341e1c2/pageserver/src/tenant/block_io.rs (L229-L236)).
# Solution
This PR adds a mode for `compact_level0_phase1` that uses the
`MergeIterator` for reading the `Value`s from the delta layer files.
`MergeIterator` is a streaming k-merge that uses vectored blob_io under
the hood, which bypasses the PS PageCache for data blocks.
Other notable changes:
* change the `DiskBtreeReader::into_stream` to buffer the node, instead
of holding a `PageCache` `PageReadGuard`.
* Without this, we run out of page cache slots in
`test_pageserver_compaction_smoke`.
* Generally, `PageReadGuard`s aren't supposed to be held across await
points, so, this is a general bugfix.
# Testing / Validation / Performance
`MergeIterator` has not yet been used in production; it's being
developed as part of
* https://github.com/neondatabase/neon/issues/8002
Therefore, this PR adds a validation mode that compares the existing
approach's value iterator with the new approach's stream output, item by
item.
If they're not identical, we log a warning / fail the unit/regression
test.
To avoid flooding the logs, we apply a global rate limit of once per 10
seconds.
In any case, we use the existing approach's value.
Expected performance impact that will be monitored in staging / nightly
benchmarks / eventually pre-prod:
* with validation:
* increased CPU usage
* ~doubled VirtualFile read bytes/second metric
* no change in disk IO usage because the kernel page cache will likely
have the pages buffered on the second read
* without validation:
* slightly higher DRAM usage because each iterator participating in the
k-merge has a dedicated buffer (as opposed to before, where compactions
would rely on the PS PageCaceh as a shared evicting buffer)
* less disk IO if previously there were repeat PageCache misses (likely
case on a busy production Pageserver)
* lower CPU usage: PageCache out of the picture, fewer syscalls are made
(vectored blob io batches reads)
# Rollout
The new code is used with validation mode enabled-by-default.
This gets us validation everywhere by default, specifically in
- Rust unit tests
- Python tests
- Nightly pagebench (shouldn't really matter)
- Staging
Before the next release, I'll merge the following aws.git PR that
configures prod to continue using the existing behavior:
* https://github.com/neondatabase/aws/pull/1663
# Interactions With Other Features
This work & rollout should complete before Direct IO is enabled because
Direct IO would double the IOPS & latency for each compaction read
(#8240).
# Future Work
The streaming k-merge's memory usage is proportional to the amount of
memory per participating layer.
But `compact_level0_phase1` still loads all keys into memory for
`all_keys_iter`.
Thus, it continues to have active memory usage proportional to the
number of keys involved in the compaction.
Future work should replace `all_keys_iter` with a streaming keys
iterator.
This PR has a draft in its first commit, which I later reverted because
it's not necessary to achieve the goal of this PR / issue #8184.
Change Azure storage configuration to point to new variables/secrets. They have
the `_NEW` suffix in order not to disrupt any tests while we complete the
switch.
Part of #8128, followup to #8480. closes#8421.
Enable scrubber to optionally post metadata scan health results to
storage controller.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Part of #8128, followed by #8502.
## Problem
Currently we lack mechanism to alert unhealthy `scan_metadata` status if
we start running this scrubber command as part of a cronjob. With the
storage controller client introduced to storage scrubber in #8196, it is
viable to set up alert by storing health status in the storage
controller database.
We intentionally do not store the full output to the database as the
json blobs potentially makes the table really huge. Instead, only a
health status and a timestamp recording the last time metadata health
status is posted on a tenant shard.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
This tests the ability to push into ACR using OIDC. Proved it worked by running slightly modified YAML.
In `promote-images` we push the following images `neon compute-tools {vm-,}compute-node-{v14,v15,v16}` into `neoneastus2`.
https://github.com/neondatabase/cloud/issues/14640
## Problem
We don't allow regular end-users to use `k8s-pod` provisioner,
but we still use it in nightly benchmarks
## Summary of changes
- Remove `provisioner` input from `neon-create-project` action, use
`k8s-neonvm` as a default provioner
- Change `neon-` platform prefix to `neonvm-`
- Remove `neon-captest-freetier` and `neon-captest-new` as we already
have their `neonvm` counterparts
Add two new functions `stream_objects_with_retries` and
`stream_tenants_generic` and use them in the `find-large-objects`
subcommand, migrating it to `remote_storage`.
Also adds the `size` field to the `ListingObject` struct.
Part of #7547
If compression is enabled, we currently try compressing each image
larger than a specific size and if the compressed version is smaller, we
write that one, otherwise we use the uncompressed image. However, this
might sometimes be a wasteful process, if there is a substantial amount
of images that don't compress well.
The compression metrics added in #8420
`pageserver_compression_image_in_bytes_total` and
`pageserver_compression_image_out_bytes_total` are well designed for
answering the question how space efficient the total compression process
is end-to-end, which helps one to decide whether to enable it or not.
To answer the question of how much waste there is in terms of trial
compression, so CPU time, we add two metrics:
* one about the images that have been trial-compressed (considered), and
* one about the images where the compressed image has actually been
written (chosen).
There is different ways of weighting them, like for example one could
look at the count, or the compressed data. But the main contributor to
compression CPU usage is amount of data processed, so we weight the
images by their *uncompressed* size. In other words, the two metrics
are:
* `pageserver_compression_image_in_bytes_considered`
* `pageserver_compression_image_in_bytes_chosen`
Part of #5431
## Problem
Old storage buckets can contain a lot of tenants that aren't known to
the control plane at all, because they belonged to test jobs that get
their control plane state cleaned up shortly after running.
In general, it's somewhat unsafe to purge these, as it's hard to
distinguish "control plane doesn't know about this, so it's garbage"
from "control plane said it didn't know about this, which is a bug in
the scrubber, control plane, or API URL configured".
However, the most common case is that we see only a small husk of a
tenant in S3 from a specific old behavior of the software, for example:
- We had a bug where heatmaps weren't deleted on tenant delete
- When WAL DR was first deployed, we didn't delete initdb.tar.zst on
tenant deletion
## Summary of changes
- Add a KnownBug variant for the garbage reason
- Include such cases in the "safe" deletion mode (`--mode=deleted`)
- Add code that inspects tenants missing in control plane to identify
cases of known bugs (this is kind of slow, but should go away once we've
cleaned all these up)
- Add an additional `-min-age` safety check similar to physical GC,
where even if everything indicates objects aren't needed, we won't
delete something that has been modified too recently.
---------
Co-authored-by: Yuchen Liang <70461588+yliang412@users.noreply.github.com>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
The secondary download HTTP API is meant to return 200 if the download
is complete, and 202 if it is still in progress. In #8198 the download
implementation was changed to drop out with success early if it
over-runs a time budget, which resulted in 200 responses for incomplete
downloads.
This breaks storcon_cli's "tenant-warmup" command, which uses the OK
status to indicate download complete.
## Summary of changes
- Only return 200 if we get an Ok() _and_ the progress stats indicate
the download is complete.
## Problem
We need to test logical replication with 3rd-party tools regularly.
## Summary of changes
Added a test using ClickHouse as a client
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Uses the Stream based `list_streaming` function added by #8457 in tenant
deletion, as suggested in https://github.com/neondatabase/neon/pull/7932#issuecomment-2150480180 .
We don't have to worry about retries, as the function is wrapped inside
an outer retry block. If there is a retryable error either during the
listing or during deletion, we just do a fresh start.
Also adds `+ Send` bounds as they are required by the
`delete_tenant_remote` function.
update pg_jsonschema extension to v 0.3.1
update pg_graphql extension to v1.5.7
update pgx_ulid extension to v0.1.5
update pg_tiktoken extension, patch Cargo.toml to use new pgrx
In general, replace:
* 'lfc_approximate_working_set_size' with
* 'lfc_approximate_working_set_size_windows'
For the "main" metrics that are actually scraped and used internally,
the old one is just marked as deprecated.
For the "autoscaling" metrics, we're not currently using the old one, so
we can get away with just replacing it.
Also, for the user-visible metrics we'll only store & expose a few
different time windows, to avoid making the UI overly busy or bloating
our internal metrics storage.
But for the autoscaling-related scraper, we aren't storing the metrics,
and it's useful to be able to programmatically operate on the trendline
of how WSS increases (or doesn't!) with window size. So there, we can
just output datapoints for each minute.
Part of neondatabase/autoscaling#872
See also https://www.notion.so/neondatabase/cca38138fadd45eaa753d81b859490c6
## Storage & Compute release 2024-07-22
This PR has so many commits because the release branch diverged from `main`.
Details https://neondb.slack.com/archives/C033A2WE6BZ/p1721650938949059?thread_ts=1721308848.034069&cid=C033A2WE6BZ
The commit range that is truly new since the last storage release are the the `main` commit which I cherry-picked using this command
```
git cherry-pick 8a8b83df27383a07bb7dbba519325c15d2f46357..4e547e6
```
PR #8299 has switched the storage scrubber to use
`DefaultCredentialsChain`. Now we do this for `remote_storage`, as it
allows us to use `remote_storage` from inside kubernetes. Most of the
diff is due to `GenericRemoteStorage::from_config` becoming `async fn`.
This adds an archival_config endpoint to the pageserver. Currently it
has no effect, and always "works", but later the intent is that it will
make a timeline archived/unarchived.
- [x] add yml spec
- [x] add endpoint handler
Part of https://github.com/neondatabase/neon/issues/8088
## Problem
There are some swagger errors in `pageserver/src/http/openapi_spec.yml`
```
Error 431 15000 Object includes not allowed fields
Error 569 3100401 should always have a 'required'
Error 569 15000 Object includes not allowed fields
Error 1111 10037 properties members must be schemas
```
## Summary of changes
Fixed the above errors.
## Problem
After a shard split, the pageserver leaves the ancestor shard's content
in place. It may be referenced by child shards, but eventually child
shards will de-reference most ancestor layers as they write their own
data and do GC. We would like to eventually clean up those ancestor
layers to reclaim space.
## Summary of changes
- Extend the physical GC command with `--mode=full`, which includes
cleaning up unreferenced ancestor shard layers
- Add test `test_scrubber_physical_gc_ancestors`
- Remove colored log output: in testing this is irritating ANSI code
spam in logs, and in interactive use doesn't add much.
- Refactor storage controller API client code out of storcon_client into
a `storage_controller/client` crate
- During physical GC of ancestors, call into the storage controller to
check that the latest shards seen in S3 reflect the latest state of the
tenant, and there is no shard split in progress.
We're removing the usage of this long-meaningless config field in
https://github.com/neondatabase/aws/pull/1599
Once that PR has been deployed to staging and prod, we can merge this
PR.
## Problem
My prior PR https://github.com/neondatabase/neon/pull/8422
caused leftovers in the GitHub action runner work directory with root
permission.
As an example see here
https://github.com/neondatabase/neon/actions/runs/10001857641/job/27646237324#step:3:37
To work-around we install vanilla postgres as non-root using deb
packages in /home/nonroot user directory
## Summary of changes
- since we cannot use root we install the deb pkgs directly and create
symbolic links for psql, pgbench and libs in expected places
- continue jobs an aws even if azure jobs fail (because this region is
currently unreliable)
Successor of #8288 , just enable zstd in tests. Also adds a test that
creates easily compressable data.
Part of #5431
---------
Co-authored-by: John Spray <john@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
The error means that manager exited earlier than `ResidenceGuard` and
it's not unexpected with current deletion implementation. This commit
changes log level to reduse noise.
Use the k-merge iterator in the compaction process to reduce memory
footprint.
part of https://github.com/neondatabase/neon/issues/8002
## Summary of changes
* refactor the bottom-most compaction code to use k-merge iterator
* add Send bound on some structs as it is used across the await points
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
We have an issue that some partial uploaded segments can be actually
missing in remote storage. I found this issue when was looking at the
logs in staging, and it can be triggered by failed uploads:
1. Code tries to upload `SEG_TERM_LSN_LSN_sk5.partial`, but receives
error from S3
2. The failed attempt is saved to `segments` vec
3. After some time, the code tries to upload
`SEG_TERM_LSN_LSN_sk5.partial` again
4. This time the upload is successful and code calls `gc()` to delete
previous uploads
5. Since new object and old object share the same name, uploaded data
gets deleted from remote storage
This commit fixes the issue by patching `gc()` not to delete objects
with the same name as currently uploaded.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Ahead of enabling eviction in the field, where it will become the
normal/default mode, let's enable it by default throughout our tests in
case any issues become visible there.
## Summary of changes
- Make default `extra_opts` for safekeepers enable offload & deletion
- Set low timeouts in `extra_opts` so that tests running for tens of
seconds have a chance to hit some of these background operations.
## Problem
These tests time out ~1 in 50 runs when in debug mode.
There is no indication of a real issue: they're just wrappers that have
large numbers of individual tests contained within on pytest case.
## Summary of changes
- Bump pg_regress timeout from 600 to 900s
- Bump test_isolation timeout from 300s (default) to 600s
In future it would be nice to break out these tests to run individual
cases (or batches thereof) as separate tests, rather than this monolith.
## Problem
This test would occasionally fail its metric check. This could happen in
the rare case that the nodes had all been restarted before their most
recent eviction.
The metric check was added in
https://github.com/neondatabase/neon/pull/8348
## Summary of changes
- Check metrics before each restart, accumulate into a bool that we
assert on at the end of the test
When `NeonEnv.from_repo_dir` was introduced, storage controller stored
its
state exclusively `attachments.json`.
Since then, it has moved to using Postgres, which stores its state in
`storage_controller_db`.
But `NeonEnv.from_repo_dir` wasn't adjusted to do this.
This PR rectifies the situation.
Context for this is failures in
`test_pageserver_characterize_throughput_with_n_tenants`
CF:
https://neondb.slack.com/archives/C033RQ5SPDH/p1721035799502239?thread_ts=1720901332.293769&cid=C033RQ5SPDH
Notably, `from_repo_dir` is also used by the backwards- and
forwards-compatibility.
Thus, the changes in this PR affect those tests as well.
However, it turns out that the compatibility snapshot already contains
the `storage_controller_db`.
Thus, it should just work and in fact we can remove hacks like
`fixup_storage_controller`.
Follow-ups created as part of this work:
* https://github.com/neondatabase/neon/issues/8399
* https://github.com/neondatabase/neon/issues/8400
## Problem
There are something wrong in the comment of
`control_plane/src/broker.rs` and `control_plane/src/pageserver.rs`
## Summary of changes
Fixed the comment about component name and their data path in
`control_plane/src/broker.rs` and `control_plane/src/pageserver.rs`.
## Problem
We lack insight into:
- How much of a tenant's physical size is image vs. delta layers
- Average sizes of image vs. delta layers
- Total layer counts per timeline, indicating size of index_part object
As well as general observability love, this is motivated by
https://github.com/neondatabase/neon/issues/6738, where we need to
define some sensible thresholds for storage amplification, and using
total physical size may not work well (if someone does a lot of DROPs
then it's legitimate for the physical-synthetic ratio to be huge), but
the ratio between image layer size and delta layer size may be a better
indicator of whether we're generating unreasonable quantities of image
layers.
## Summary of changes
- Add pageserver_layer_bytes and pageserver_layer_count metrics,
labelled by timeline and `kind` (delta or image)
- Add & subtract these with LayerInner's lifetime.
I'm intentionally avoiding using a generic metric RAII guard object, to
avoid bloating LayerInner: it already has all the information it needs
to update metric on new+drop.
This test reproduces the case of a writer creating a deep stack of L0
layers. It uses realistic layer sizes and writes several gigabytes of
data, therefore runs as a performance test although it is validating
memory footprint rather than performance per se.
It acts a regression test for two recent fixes:
- https://github.com/neondatabase/neon/pull/8401
- https://github.com/neondatabase/neon/pull/8391
In future it will demonstrate the larger improvement of using a k-merge
iterator for L0 compaction (#8184)
This test can be extended to enforce limits on the memory consumption of
other housekeeping steps, by restarting the pageserver and then running
other things to do the same "how much did RSS increase" measurement.
Existing tenants and some selection of layers might produce duplicated
keys. Add tests to ensure the k-merge iterator handles it correctly. We
also enforced ordering of the k-merge iterator to put images before
deltas.
part of https://github.com/neondatabase/neon/issues/8002
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
We want to run performance tests on all supported cloud providers.
We want to run most tests on the postgres version which is default for
new projects in production, currently (July 24) this is postgres version
16
## Summary of changes
- change default postgres version for some (performance) tests to 16
(which is our default for new projects in prod anyhow)
- add azure region to pgbench_compare jobs
- add azure region to pgvector benchmarking jobs
- re-used project `weathered-snowflake-88107345` was prepared with 1
million embeddings running on 7 minCU 7 maxCU in azure region to compare
with AWS region (pgvector indexing and hnsw queries)
- see job pgbench-pgvector
- Note we now have a 11 environments combinations where we run
pgbench-compare and 5 are for k8s-pod (deprecated) which we can remove
in the future once auto-scaling team approves.
## Logs
A current run with the changes from this pull request is running here
https://github.com/neondatabase/neon/actions/runs/9972096222
Note that we currently expect some failures due to
- https://github.com/neondatabase/neon/issues/8275
- instability of projects on azure region
## Problem
When a tenant creates a new timeline that they will treat as their
'main' history,
it is awkward to permanently retain an 'old main' timeline as its
ancestor. Currently
this is necessary because it is forbidden to delete a timeline which has
descendents.
## Summary of changes
A new pageserver API is proposed to 'adopt' data from a parent timeline
into
one of its children, such that the link between ancestor and child can
be severed,
leaving the parent in a state where it may then be deleted.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
ValueRef is an unnecessarily large structure, because it carries a
cursor. L0 compaction currently instantiates gigabytes of these under
some circumstances.
## Summary of changes
- Carry a ref to the parent layer instead of a cursor, and construct a
cursor on demand.
This reduces RSS high watermark during L0 compaction by about 20%.
## Problem
The `evictions_with_low_residence_duration` is used as an indicator of
cache thrashing. However, there are situations where it is quite
legitimate to only have a short residence during compaction, where a
delta is downloaded, used to generate an image layer, and then
discarded. This can lead to false positive alerts.
## Summary of changes
- Only track low residence duration for layers that have been accessed
at least once (compaction doesn't count as an access). This will give us
a metric that indicates thrashing on layers that the _user_ is using,
rather than those we're downloading for housekeeping purposes.
Once we add "layer visibility" as an explicit property of layers, this
can also be used as a cleaner condition (residence of non-visible layers
should never be alertable)
## Problem
close https://github.com/neondatabase/neon/issues/8389
## Summary of changes
A quick mitigation for tenants with fast writes. We compact at most 60
delta layers at a time, expecting a memory footprint of 15GB. We will
pick the oldest 60 L0 layers.
This should be a relatively safe change so no test is added. Question is
whether to make this parameter configurable via tenant config.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: John Spray <john@neon.tech>
- `horizon` is a confusing term, it's not at all obvious that this means
space-based retention limit, rather than the total GC history limit.
Rename to `GcCutoffs::space`.
- `pitr` is less confusing, but still an unecessary level of indirection
from what we really mean: a time-based condition. The fact that we use
that that time-history for Point In Time Recovery doesn't mean we have
to refer to time as "pitr" everywhere. Rename to `GcCutoffs::time`.
As described in #8385, the likely source for flakiness in
test_tenant_creation_fails is the following sequence of events:
1. test instructs the storage controller to create the tenant
2. storage controller adds the tenant and persists it to the database.
issues a creation request
3. the pageserver restarts with the failpoint disabled
4. storage controller's background reconciliation still wants to create
the tenant
5. pageserver gets new request to create the tenant from background
reconciliation
This commit just avoids the storage controller entirely. It has its own
set of issues, as the re-attach request will obviously not include the
tenant, but it's still useful to test for non-existence of the tenant.
The generation is also not optional any more during tenant attachment.
If you omit it, the pageserver yields an error. We change the signature
of `tenant_attach` to reflect that.
Alternative to #8385Fixes#8266
## Problem
This structure was in an Arc<> unnecessarily, making it harder to reason
about its lifetime (i.e. it was superficially possible for LayerManager
to outlive timeline, even though no code used it that way)
## Summary of changes
- Remove the Arc<>
Right now timeline detach ancestor reports an error (409, "no ancestor")
on a new attempt after successful completion. This makes it troublesome
for storage controller retries. Fix it to respond with `200 OK` as if
the operation had just completed quickly.
Additionally, the returned timeline identifiers in the 200 OK response
are now ordered so that responses between different nodes for error
comparison are done by the storage controller added in #8353.
Design-wise, this PR introduces a new strategy for accessing the latest
uploaded IndexPart:
`RemoteTimelineClient::initialized_upload_queue(&self) ->
Result<UploadQueueAccessor<'_>, NotInitialized>`. It should be a more
scalable way to query the latest uploaded `IndexPart` than to add a
query method for each question directly on `RemoteTimelineClient`.
GC blocking will need to be introduced to make the operation fully
idempotent. However, it is idempotent for the cases demonstrated by
tests.
Cc: #6994
## Problem
Pageserver GC uses a size-based condition (GC "horizon" in addition to
time-based "PITR").
Eventually we plan to retire the size-based condition:
https://github.com/neondatabase/neon/issues/6374
Currently, we always apply the more conservative of the two, meaning
that tenants always retain at least 64MB of history (default horizon),
even after a very long time has passed. This is particularly acute in
cases where someone has dropped tables/databases, and then leaves a
database idle: the horizon can prevent GCing very large quantities of
historical data (we already account for this in synthetic size by
ignoring gc horizon).
We're not entirely removing GC horizon right now because we don't want
to 100% rely on standby_horizon for robustness of physical replication,
but we can tweak our logic to avoid retaining that 64MB LSN length
indefinitely.
## Summary of changes
- Rework `Timeline::find_gc_cutoffs`, with new logic:
- If there is no PITR set, then use `DEFAULT_PITR_INTERVAL` (1 week) to
calculate a time threshold. Retain either the horizon or up to that
thresholds, whichever requires less data.
- When there is a PITR set, and we have unambiguously resolved the
timestamp to an LSN, then ignore the GC horizon entirely. For typical
PITRs (1 day, 1 week), this will still easily retain enough data to
avoid stressing read only replicas.
The key property we end up with, whether a PITR is set or not, is that
after enough time has passed, our GC cutoff on an idle timeline will
catch up with the last_record_lsn.
Using `DEFAULT_PITR_INTERVAL` is a bit of an arbitrary hack, but this
feels like it isn't really worth the noise of exposing in TenantConfig.
We could just make it a different named constant though. The end-end
state will be that there is no gc_horizon at all, and that tenants with
pitr_interval=0 would truly retain no history, so this constant would go
away.
Currently storage controller does not support forwarding timeline detach
ancestor requests to pageservers. Add support for forwarding `PUT
.../:tenant_id/timelines/:timeline_id/detach_ancestor`. Implement the
support mostly as is, because the timeline detach ancestor will be made
(mostly) idempotent in future PR.
Cc: #6994
## Problem
Right now if there are too many running xacts to be restored from CLOG
at replica startup,
then replica is not trying to restore them and wait for non-overflown
running-xacs WAL record from primary.
But if primary is not active, then replica will not start at all.
Too many running xacts can be caused by transactions with large number
of subtractions.
But right now it can be also cause by two reasons:
- Lack of shutdown checkpoint which updates `oldestRunningXid` (because
of immediate shutdown)
- nextXid alignment on 1024 boundary (which cause loosing ~1k XIDs on
each restart)
Both problems are somehow addressed now.
But we have existed customers with "sparse" CLOG and lack of
checkpoints.
To be able to start RO replicas for such customers I suggest to add GUC
which allows replica to start even in case of subxacts overflow.
## Summary of changes
Add `neon.running_xacts_overflow_policy` with the following values:
- ignore: restore from CLOG last N XIDs and accept connections
- skip: do not restore any XIDs from CXLOGbut still accept connections
- wait: wait non-overflown running xacts record from primary node
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
This test would sometimes violate the min resident size during disk
eviction and fail due to the generate warning log.
Disk usage candidate collection only takes into account active tenants.
However, the statvfs call takes into account the entire tenants
directory, which includes tenants which haven't become active yet.
After re-starting the pageserver, disk usage eviction may kick in
*before* both tenants have become active. Hence, the logic will try to satisfy
thedisk usage requirements by evicting everything belonging to the active
tenant, and hence violating the tenant minimum resident size.
## Summary of changes
Allow the warning
## Problem
new clippy warnings on nightly.
## Summary of changes
broken up each commit by warning type.
1. Remove some unnecessary refs.
2. In edition 2024, inference will default to `!` and not `()`.
3. Clippy complains about doc comment indentation
4. Fix `Trait + ?Sized` where `Trait: Sized`.
5. diesel_derives triggering `non_local_defintions`
## Problem
We already back off on compaction retries, but the impact of a failing
compaction can be so great that backing off up to 300s isn't enough. The
impact is consuming a lot of I/O+CPU in the case of image layer
generation for large tenants, and potentially also leaking disk space.
Compaction failures are extremely rare and almost always indicate a bug,
frequently a bug that will not let compaction to proceed until it is
fixed.
Related: https://github.com/neondatabase/neon/issues/6738
## Summary of changes
- Introduce a CircuitBreaker type
- Add a circuit breaker for compaction, with a policy that after 5
failures, compaction will not be attempted again for 24 hours.
- Add metrics that we can alert on: any >0 value for
`pageserver_circuit_breaker_broken_total` should generate an alert.
- Add a test that checks this works as intended.
Couple notes to reviewers:
- Circuit breakers are intrinsically a defense-in-depth measure: this is
not the solution to any underlying issues, it is just a general
mitigation for "unknown unknowns" that might be encountered in future.
- This PR isn't primarily about writing a perfect CircuitBreaker type:
the one in this PR is meant to be just enough to mitigate issues in
compaction, and make it easy to monitor/alert on these failures. We can
refine this type in future as/when we want to use it elsewhere.
Implement decompression of images for vectored reads.
This doesn't implement support for still treating blobs as uncompressed
with the bits we reserved for compression, as we have removed that
functionality in #8300 anyways.
Part of #5431
We need to pass on the configured compression param during image layer
generation.
This was an oversight of #8106, and the likely cause why #8288 didn't
bring any interesting regressions.
Part of https://github.com/neondatabase/neon/issues/5431
## Problem
I need `neon_superuser` to be allowed to create snapshots for
replication tests
## Summary of changes
Adds a migration that grants these functions to neon_superuser
Rewrite streaming vectored read planner to be a separate struct. The API
is designed to produce batches around `max_read_size` instead of exactly
less than that so that `handle_XX` returns one batch a time.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
In anticipation of later adding a really nice drain+delete API, I
initially only added an intentionally basic `/drop` API that is just
about usable for deleting nodes in a pinch, but requires some ugly
storage controller restarts to persuade it to restart secondaries.
## Summary of changes
I started making a few tiny fixes, and ended up writing the delete
API...
- Quality of life nit: ordering of node + tenant listings in storcon_cli
- Papercut: Fix the attach_hook using the wrong operation type for
reporting slow locks
- Make Service::spawn tolerate `generation_pageserver` columns that
point to nonexistent node IDs. I started out thinking of this as a
general resilience thing, but when implementing the delete API I
realized it was actually a legitimate end state after the delete API is
called (as that API doesn't wait for all reconciles to succeed).
- Add a `DELETE` API for nodes, which does not gracefully drain, but
does reschedule everything. This becomes safe to use when the system is
in any state, but will incur availability gaps for any tenants that
weren't already live-migrated away. If tenants have already been
drained, this becomes a totally clean + safe way to decom a node.
- Add a test and a storcon_cli wrapper for it
This is meant to be a robust initial API that lets us remove nodes
without doing ugly things like restarting the storage controller -- it's
not quite a totally graceful node-draining routine yet. There's more
work in https://github.com/neondatabase/neon/issues/8333 to get to our
end-end state.
## Problem
Follow up to https://github.com/neondatabase/neon/pull/8335, to improve
observability of how many evict/restores we are doing.
## Summary of changes
- Add `safekeeper_eviction_events_started_total` and
`safekeeper_eviction_events_completed_total`, with a "kind" label of
evict or restore. This gives us rates, and also ability to calculate how
many are in progress.
- Generalize SafekeeperMetrics test type to use the same helpers as
pageserver, and enable querying any metric.
- Read the new metrics at the end of the eviction test.
## Problem
SeqWait::would_wait_for returns Ok in the case when we would not wait
for the sequence number and Err otherwise.
ReconcilerWaiter::get_status uses it the wrong way around. This can
cause the storage controller to go into a busy loop
and make it look unavailable to the k8s controller.
## Summary of changes
Use `SeqWait::would_wait_for` correctly.
`trace_read_requests` is a per `Tenant`-object option.
But the `handle_pagerequests` loop doesn't know which
`Tenant` object (i.e., which shard) the request is for.
The remaining use of the `Tenant` object is to check `tenant.cancel`.
That check is incorrect [if the pageserver hosts multiple
shards](https://github.com/neondatabase/neon/issues/7427#issuecomment-2220577518).
I'll fix that in a future PR where I completely eliminate the holding
of `Tenant/Timeline` objects across requests.
See [my code RFC](https://github.com/neondatabase/neon/pull/8286) for
the
high level idea.
Note that we can always bring the tracing functionality if we need it.
But since it's actually about logging the `page_service` wire bytes,
it should be a `page_service`-level config option, not per-Tenant.
And for enabling tracing on a single connection, we can implement
a `set pageserver_trace_connection;` option.
Set core rmilit to ulimited in compute_ctl, so that all child processes
inherit it. We could also set rlimit in relevant startup script, but
that way we would depend on external setup and might inadvertently
disable it again (core dumping worked in pods, but not in VMs with
inittab-based startup).
## Problem
- The condition for eviction is not time-based: it is possible for a
timeline to be restored in response to a client, that client times out,
and then as soon as the timeline is restored it is immediately evicted
again.
- There is no delay on eviction at startup of the safekeeper, so when it
starts up and sees many idle timelines, it does many evictions which
will likely be immediately restored when someone uses the timeline.
## Summary of changes
- Add `eviction_min_resident` parameter, and use it in
`ready_for_eviction` to avoid evictions if the timeline has been
resident for less than this period.
- This also implicitly delays evictions at startup for
`eviction_min_resident`
- Set this to a very low number for the existing eviction test, which
expects immediate eviction.
The default period is 15 minutes. The general reasoning for that is that
in the worst case where we thrash ~10k timelines on one safekeeper,
downloading 16MB for each one, we should set a period that would not
overwhelm the node's bandwidth.
Part of https://github.com/neondatabase/neon/issues/8002. This pull
request adds a k-merge iterator for bottom-most compaction.
## Summary of changes
* Added back lsn_range / key_range in delta layer inner. This was
removed due to https://github.com/neondatabase/neon/pull/8050, but added
back because iterators need that information to process lazy loading.
* Added lazy-loading k-merge iterator.
* Added iterator wrapper as a unified iterator type for image+delta
iterator.
The current status and test should cover the use case for L0 compaction
so that the L0 compaction process can bypass page cache and have a fixed
amount of memory usage. The next step is to integrate this with the new
bottom-most compaction.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Removes the `ImageCompressionAlgorithm::DisabledNoDecompress` variant.
We now assume any blob with the specific bits set is actually a
compressed blob.
The `ImageCompressionAlgorithm::Disabled` variant still remains and is
the new default.
Reverts large parts of #8238 , as originally intended in that PR.
Part of #5431
## Problem
This test incorrectly assumed that a post-split compaction would only
drop content. This was easily destabilized by any changes to image
generation rules.
## Summary of changes
- Before split, do a full image layer generation pass, to guarantee that
post-split compaction should only drop data, never create it.
- Fix the force_image_layer_creation mode of compaction that we use from
tests like this: previously it would try and generate image layers even
if one already existed with the same layer key, which caused compaction
to fail.
## Problem
#7809 - we do not support sslnegotiation=direct
#7810 - we do not support negotiating down the protocol extensions.
## Summary of changes
1. Same as postgres, check the first startup packet byte for tls header
`0x16`, and check the ALPN.
2. Tell clients using protocol >3.0 to downgrade
I want to fix bugs in `page_service`
([issue](https://github.com/neondatabase/neon/issues/7427)) and the
`import basebackup` / `import wal` stand in the way / make the
refactoring more complicated.
We don't use these methods anyway in practice, but, there have been some
objections to removing the functionality completely.
So, this PR preserves the existing functionality but moves it into the
HTTP management API.
Note that I don't try to fix existing bugs in the code, specifically not
fixing
* it only ever worked correctly for unsharded tenants
* it doesn't clean up on error
All errors are mapped to `ApiError::InternalServerError`.
## Problem
Slack thread:
https://neondb.slack.com/archives/C033RQ5SPDH/p1720511577862519
We're seeing OOMs in staging on a pageserver that has
l0_flush.mode=Direct enabled.
There's a strong correlation between jumps in `maxrss_kb` and
`pageserver_timeline_ephemeral_bytes`, so, it's quite likely that
l0_flush.mode=Direct is the culprit.
Notably, the expected max memory usage on that staging server by the
l0_flush.mode=Direct is ~2GiB but we're seeing as much as 24GiB max RSS
before the OOM kill.
One hypothesis is that we're dropping the semaphore permit before all
the dirtied pages have been flushed to disk. (The flushing to disk
likely happens in the fsync inside the `.finish()` call, because we're
using ext4 in data=ordered mode).
## Summary of changes
Hold the permit until after we're done with `.finish()`.
part of https://github.com/neondatabase/cloud/issues/14024, k8s does not
always have a volume available for logging, and I'm running into weird
permission errors... While I could spend time figuring out how to create
temp directories for logging, I think it would be better to just disable
file logging as k8s containers are ephemeral and we cannot retrieve
anything on the fs after the container gets removed.
## Summary of changes
`PAGESERVER_DISABLE_FILE_LOGGING=1` -> file logging disabled
Signed-off-by: Alex Chi Z <chi@neon.tech>
This tweaks the rows-to-JSON rendering logic in order to avoid
allocating 0-sized temporary vectors and later growing them
to insert elements.
As the exact size is known in advance, both vectors can be built
with an exact capacity upfront. This will avoid further vector
growing/reallocation in the rendering hotpath.
Signed-off-by: Luca BRUNO <lucab@lucabruno.net>
## Problem
In https://github.com/neondatabase/neon/pull/8161, we changed the path
to Neon artefacts by adding commit sha to it, but we missed adding these
changes to `promote-compatibility-data` job that we use for
backward/forward- compatibility testing.
## Summary of changes
- Add commit sha to `promote-compatibility-data`
## Summary of changes
Increase the `assert_size_approx_equal` threshold to avoid flakiness of
`test_lsn_lease_size`. Still needs more investigation to fully resolve
#8293.
- Also set `autovacuum=off` for the endpoint we are running in the test.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
`test_timeline_size_quota_on_startup` assumed that writing data beyond
the size limit would always be blocked. This is not so: the limit is
only enforced if feedback makes it back from the pageserver to the
safekeeper + compute.
Closes: https://github.com/neondatabase/neon/issues/6562
## Summary of changes
- Modify the test to wait for the pageserver to catch up. The size limit
was never actually being enforced robustly, the original version of this
test was just writing much more than 30MB and about 98% of the time
getting lucky such that the feedback happened to arrive before the tests
for loop was done.
- If the test fails, log the logical size as seen by the pageserver.
## Problem
Debug-mode runs of test_pg_regress are rather slow since
https://github.com/neondatabase/neon/pull/8105, and occasionally exceed
their 600s timeout.
## Summary of changes
- Use 8MiB layer files, avoiding large ephemeral layers
On a hetzner AX102, this takes the runtime from 230s to 190s. Which
hopefully will be enough to get the runtime on github runners more
reliably below its 600s timeout.
This has the side benefit of exercising more of the pageserver stack
(including compaction) under a workload that exercises a more diverse
set of postgres functionality than most of our tests.
## Problem
We currently use 'immediate' mode in the most commonly used shutdown
path, when the control plane calls a `compute_ctl` API to terminate
Postgres inside compute without waiting for the actual pod / VM
termination. Yet, 'immediate' shutdown doesn't create a shutdown
checkpoint and ROs have bad times figuring out the list of running xacts
during next start.
## Summary of changes
Use 'fast' mode, which creates a shutdown checkpoint that is important
for ROs to get a list of running xacts faster instead of going through
the CLOG. On the control plane side, we poll this `compute_ctl`
termination API for 10s, it should be enough as we don't really write
any data at checkpoint time. If it times out, we anyway switch to the
slow k8s-based termination.
See https://www.postgresql.org/docs/current/server-shutdown.html for the
list of modes and signals.
The default VM shutdown hook already uses `fast` mode, see [1]
[1]
c9fd8d7693/vm-image-spec.yaml (L30-L31)
Related to #6211
## Problem
LSN Leases introduced in #8084 is a new API that is made shard-aware
from day 1. To support ephemeral endpoint in #7994 without linking
Postgres C API against `compute_ctl`, part of the sharding needs to
reside in `utils`.
## Summary of changes
- Create a new `shard` module in utils crate.
- Move more interface related part of tenant sharding API to utils and
re-export them in pageserver_api.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
## Problem
Rarely, a dbdir entry can exist with no `relmap_file_key` data. This
causes compaction to fail, because it assumes that if the database
exists, then so does the relmap file.
Basebackup already handled this using a boolean to record whether such a
key exists, but `collect_keyspace` didn't.
## Summary of changes
- Respect the flag for whether a relfilemap exists in collect_keyspace
- The reproducer for this issue will merge separately in
https://github.com/neondatabase/neon/pull/8232
These tests will help verify that replication, both physical and
logical, works as expected in Neon.
Co-authored-by: Sasha Krassovsky <sasha@neon.tech>
Allows a process to run without blocking program execution, which can be
useful for certain test scenarios.
Co-authored-by: Sasha Krassovsky <sasha@neon.tech>
## Problem
- Resident memory on long running pageserver processes tends to climb:
memory fragmentation is suspected.
- Total resident memory may be a limiting factor for running on smaller
nodes.
## Summary of changes
- As a low-energy experiment, switch the pageserver to use jemalloc (not
a net-new dependency, proxy already use it)
- Decide at end of week whether to revert before next release.
## Problem
Sparse keyspaces were constructed with ranges out of order: this didn't break things obviously, but meant that users of KeySpace functions that assume ordering would assert out.
Closes https://github.com/neondatabase/neon/issues/8277
## Summary of changes
make sure the sparse keyspace has ordered keyspace parts
The find-large-objects scrubber subcommand is quite fast if you run it
in an environment with low latency to the S3 bucket (say an EC2 instance
in the same region). However, the higher the latency gets, the slower
the command becomes. Therefore, add a concurrency param and make it
parallelized. This doesn't change that general relationship, but at
least lets us do multiple requests in parallel and therefore hopefully
faster.
Running with concurrency of 64 (default):
```
2024-07-05T17:30:22.882959Z INFO lazy_load_identity [...]
[...]
2024-07-05T17:30:28.289853Z INFO Scanned 500 shards. [...]
```
With concurrency of 1, simulating state before this PR:
```
2024-07-05T17:31:43.375153Z INFO lazy_load_identity [...]
[...]
2024-07-05T17:33:51.987092Z INFO Scanned 500 shards. [...]
```
In other words, to list 500 shards, speed is increased from 2:08 minutes
to 6 seconds.
Follow-up of #8257, part of #5431
Improve parsing of the `ImageCompressionAlgorithm` enum to allow level
customization like `zstd(1)`, as strum only takes `Default::default()`,
i.e. `None` as the level.
Part of #5431
## Problem
test_subscriber_restart has quit large failure rate'
https://neonprod.grafana.net/d/fddp4rvg7k2dcf/regression-test-failures?orgId=1&var-test_name=test_subscriber_restart&var-max_count=100&var-restrict=false
I can be caused by too small timeout (5 seconds) to wait until changes
are propagated.
Related to #8097
## Summary of changes
Increase timeout to 30 seconds.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We want to be able to test how our infrastructure reacts on segfaults in
Postgres (for example, we collect cores, and get some required
logs/metrics, etc)
## Summary of changes
- Add `trigger_segfauls` function to `neon_test_utils` to trigger a
segfault in Postgres
- Add `trigger_panic` function to `neon_test_utils` to trigger SIGABRT
(by using `elog(PANIC, ...))
- Fix cleanup logic in regression tests in endpoint crashed
## Problem
Assume a timeline with the following workload: very slow ingest of
updates to a small number of keys that fit within the same partition (as decided by
`KeySpace::partition`). These tenants will create small L0 layers since due to time
based rolling, and, consequently, the L1 layers will also be small.
Currently, by default, we need to ingest 512 MiB of WAL before checking
if an image layer is required. This scheme works fine under the assumption that L1s are roughly of
checkpoint distance size, but as the first paragraph explained, that's not the case for all workloads.
## Summary of changes
Check if new image layers are required at least once every checkpoint timeout interval.
## Problem
Safekeepers left running for a long time use a lot of memory (up to the
point of OOMing, on small nodes) for deleted timelines, because the
`Timeline` struct is kept alive as a guard against recreating deleted
timelines.
Closes: https://github.com/neondatabase/neon/issues/6810
## Summary of changes
- Create separate tombstones that just record a ttid and when the
timeline was deleted.
- Add a periodic housekeeping task that cleans up tombstones older than
a hardcoded TTL (24h)
I think this also makes https://github.com/neondatabase/neon/pull/6766
un-needed, as the tombstone is also checked during deletion.
I considered making the overall timeline map use an enum type containing
active or deleted, but having a separate map of tombstones avoids
bloating that map, so that calls like `get()` can still go straight to a
timeline without having to walk a hashmap that also contains tombstones.
## Problem
This test directly manages locations on pageservers and configuration of
an endpoint. However, it did not switch off the parts of the storage
controller that attempt to do the same: occasionally, the test would
fail in a strange way such as a compute failing to accept a
reconfiguration request.
## Summary of changes
- Wire up the storage controller's compute notification hook to a no-op
handler
- Configure the tenant's scheduling policy to Stop.
## Problem
See #7466
## Summary of changes
Implement algorithm descried in
https://hal.science/hal-00465313/document
Now new GUC is added:
`neon.wss_max_duration` which specifies size of sliding window (in
seconds). Default value is 1 hour.
It is possible to request estimation of working set sizes (within this
window using new function
`approximate_working_set_size_seconds`. Old function
`approximate_working_set_size` is preserved for backward compatibility.
But its scope is also limited by `neon.wss_max_duration`.
Version of Neon extension is changed to 1.4
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Matthias van de Meent <matthias@neon.tech>
Part of #7497, closes#8071. (accidentally closed#8208, reopened here)
## Problem
After the changes in #8084, we need synthetic size to also account for
leased LSNs so that users do not get free retention by running a small
ephemeral endpoint for a long time.
## Summary of changes
This PR integrates LSN leases into the synthetic size calculation. We
model leases as read-only branches started at the leased LSN (except it
does not have a timeline id).
Other changes:
- Add new unit tests testing whether a lease behaves like a read-only
branch.
- Change `/size_debug` response to include lease point in the SVG
visualization.
- Fix `/lsn_lease` HTTP API to do proper parsing for POST.
Signed-off-by: Yuchen Liang <yuchen@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Adds a find-large-objects subcommand to the scrubber to allow listing
layer objects larger than a specific size.
To be used like:
```
AWS_PROFILE=dev REGION=us-east-2 BUCKET=neon-dev-storage-us-east-2 cargo run -p storage_scrubber -- find-large-objects --min-size 250000000 --ignore-deltas
```
Part of #5431
## Problem
When generations were new, these messages were an important way of
noticing if something unexpected was going on. We found some real issues
when investigating tests that unexpectedly tripped them.
At time has gone on, this code is now pretty battle-tested, and as we do
more live migrations etc, it's fairly normal to see the occasional
message from a node with a stale generation.
At this point the cognitive load on developers to selectively allow-list
these logs outweighs the benefit of having them at warn severity.
Closes: https://github.com/neondatabase/neon/issues/8080
## Summary of changes
- Downgrade "Dropped remote consistent LSN updates" and "Dropping stale
deletions" messages to INFO
- Remove all the allow-list entries for these logs.
## Problem
`pg-clients` workflow looks different from the main `build-and-test`
workflow for historical reasons (it was my very first task at Neon, and
back then I wasn't really familiar with the rest of the CI pipelines).
This PR unifies `pg-clients` workflow with `build-and-test`
## Summary of changes
- Rename `pg_clients.yml` to `pg-clients.yml`
- Run the workflow on changes in relevant files
- Create Allure report for tests
- Send slack notifications to `#on-call-qa-staging-stream` channel
(instead of `#on-call-staging-stream`)
- Update Client libraries once we're here
## Problem
I'd like to keep this in the tree since it might be useful in prod as
well. It's a bit too noisy as is and missing the lsn.
## Summary of changes
Add an lsn field and and increase the rate limit duration.
## Problem
Currently, if you need to rename a job and the job is listed in [branch
protection
rules](https://github.com/neondatabase/neon/settings/branch_protection_rules),
the PR won't be allowed to merge.
## Summary of changes
- Add `conclusion` job that fails if any of its dependencies don't
finish successfully
## Problem
If there's a quota error, it makes sense to cache it for a short window
of time. Many clients do not handle database connection errors
gracefully, so just spam retry 🤡
## Summary of changes
Updates the node_info cache to support storing console errors. Store
console errors if they cannot be retried (using our own heuristic.
should only trigger for quota exceeded errors).
## Problem
The metrics we have today aren't convenient for planning around the
impact of timeline archival on costs.
Closes: https://github.com/neondatabase/neon/issues/8108
## Summary of changes
- Add metric `pageserver_archive_size`, which indicates the logical
bytes of data which we would expect to write into an archived branch.
- Add metric `pageserver_pitr_history_size`, which indicates the
distance between last_record_lsn and the PITR cutoff.
These metrics are somewhat temporary: when we implement #8088 and
associated consumption metric changes, these will reach a final form.
For now, an "archived" branch is just any branch outside of its parent's
PITR window: later, archival will become an explicit state (which will
_usually_ correspond to falling outside the parent's PITR window).
The overall volume of timeline metrics is something to watch, but we are
removing many more in https://github.com/neondatabase/neon/pull/8245
than this PR is adding.
I'd like to add some constraints to the layer map we generate in tests.
(1) is the layer map that the current compaction algorithm will produce.
There is a property that for all delta layer, all delta layer overlaps
with it on the LSN axis will have the same LSN range.
(2) is the layer map that cannot be produced with the legacy compaction
algorithm.
(3) is the layer map that will be produced by the future
tiered-compaction algorithm. The current validator does not allow that
but we can modify the algorithm to allow it in the future.
## Summary of changes
Add a validator to check if the layer map is valid and refactor the test
cases to include delta layer start/end LSN.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We record detailed histograms for all page_service op types, which
mostly aren't very interesting, but make our prometheus scrapes huge.
Closes: #8223
## Summary of changes
- Only track GetPageAtLsn histograms on a per-timeline granularity. For
all other operation types, rely on existing node-wide histograms.
we want to run some specific pagebench test cases on dedicated hardware
to get reproducible results
run1: 1 client per tenant => characterize throughput with n tenants.
- 500 tenants
- scale 13 (200 MB database)
- 1 hour duration
- ca 380 GB layer snapshot files
run2.singleclient: 1 client per tenant => characterize latencies
run2.manyclient: N clients per tenant => characterize throughput
scalability within one tenant.
- 1 tenant with 1 client for latencies
- 1 tenant with 64 clients because typically for a high number of
connections we recommend the connection pooler
which by default uses 64 connections (for scalability)
- scale 136 (2048 MB database)
- 20 minutes each
PR #8106 was created with the assumption that no blob is larger than
`256 MiB`. Due to #7852 we have checking for *writes* of blobs larger
than that limit, but we didn't have checking for *reads* of such large
blobs: in theory, we could be reading these blobs every day but we just
don't happen to write the blobs for some reason.
Therefore, we now add a warning for *reads* of such large blobs as well.
To make deploying compression less dangerous, we therefore only assume a
blob is compressed if the compression setting is present in the config.
This also means that we can't back out of compression once we enabled
it.
Part of https://github.com/neondatabase/neon/issues/5431
## Problem
test_location_conf_churn fails on log errors when it tries to shutdown a
pageserver immediately after starting a tenant attach, like this:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-8224/9761000525/index.html#/testresult/15fb6beca5c7327c
```
shutdown:shutdown{tenant_id=35f5c55eb34e7e5e12288c5d8ab8b909 shard_id=0000}:timeline_shutdown{timeline_id=30936747043353a98661735ad09cbbfe shutdown_mode=FreezeAndFlush}: failed to freeze and flush: cannot flush frozen layers when flush_loop is not running, state is Exited\n')
```
This is happening because Tenant::shutdown fires its cancellation token
early if the tenant is not fully attached by the time shutdown is
called, so the flush loop is shutdown by the time we try and flush.
## Summary of changes
- In the early-cancellation case, also set the shutdown mode to Hard to
skip trying to do a flush that will fail.
## Problem
GitHub Actions complain that we use actions that depend on deprecated
Node 16:
```
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: docker/setup-buildx-action@v2
```
But also, the latest `docker/setup-buildx-action` fails with the following
error:
```
/nvme/actions-runner/_work/_actions/docker/setup-buildx-action/v3/webpack:/docker-setup-buildx/node_modules/@actions/cache/lib/cache.js:175
throw new Error(`Path Validation Error: Path(s) specified in the action for caching do(es) not exist, hence no cache is being saved.`);
^
Error: Path Validation Error: Path(s) specified in the action for caching do(es) not exist, hence no cache is being saved.
at Object.rejected (/nvme/actions-runner/_work/_actions/docker/setup-buildx-action/v3/webpack:/docker-setup-buildx/node_modules/@actions/cache/lib/cache.js:175:1)
at Generator.next (<anonymous>)
at fulfilled (/nvme/actions-runner/_work/_actions/docker/setup-buildx-action/v3/webpack:/docker-setup-buildx/node_modules/@actions/cache/lib/cache.js:29:1)
```
We can work this around by setting `cache-binary: false` for `uses:
docker/setup-buildx-action@v3`
## Summary of changes
- Update `docker/setup-buildx-action` from `v2` to `v3`, set
`cache-binary: false`
- Update `docker/login-action` from `v2` to `v3`
- Update `docker/build-push-action` from `v4`/`v5` to `v6`
All the code to ensure the WAL record lands at a page boundary was
unnecessary for reproducing the original problem. In fact, it's a pretty
basic test that checks that outbound replication (= neon as publisher)
still works after restarting the endpoint. It just used to be very
broken before commit 5ceccdc7de, which also added this test.
To verify that:
1. Check out commit f3af5f4660 (because the next commit, 7dd58e1449,
fixed the same bug in a different way, making it infeasible to revert
the bug fix in an easy way)
2. Revert the bug fix from commit 5ceccdc7de with this:
```
diff --git a/pgxn/neon/walproposer_pg.c b/pgxn/neon/walproposer_pg.c
index 7debb6325..9f03bbd99 100644
--- a/pgxn/neon/walproposer_pg.c
+++ b/pgxn/neon/walproposer_pg.c
@@ -1437,8 +1437,10 @@ XLogWalPropWrite(WalProposer *wp, char *buf, Size nbytes, XLogRecPtr recptr)
*
* https://github.com/neondatabase/neon/issues/5749
*/
+#if 0
if (!wp->config->syncSafekeepers)
XLogUpdateWalBuffers(buf, recptr, nbytes);
+#endif
while (nbytes > 0)
{
```
3. Run the test_wal_page_boundary_start regression test. It fails, as
expected
4. Apply this commit to the test, and run it again. It still fails, with
the same error mentioned in issue #5749:
```
PG:2024-06-30 20:49:08.805 GMT [1248196] STATEMENT: START_REPLICATION SLOT "sub1" LOGICAL 0/0 (proto_version '4', origin 'any', publication_names '"pub1"')
PG:2024-06-30 21:37:52.567 GMT [1467972] LOG: starting logical decoding for slot "sub1"
PG:2024-06-30 21:37:52.567 GMT [1467972] DETAIL: Streaming transactions committing after 0/1532330, reading WAL from 0/1531C78.
PG:2024-06-30 21:37:52.567 GMT [1467972] STATEMENT: START_REPLICATION SLOT "sub1" LOGICAL 0/0 (proto_version '4', origin 'any', publication_names '"pub1"')
PG:2024-06-30 21:37:52.567 GMT [1467972] LOG: logical decoding found consistent point at 0/1531C78
PG:2024-06-30 21:37:52.567 GMT [1467972] DETAIL: There are no running transactions.
PG:2024-06-30 21:37:52.567 GMT [1467972] STATEMENT: START_REPLICATION SLOT "sub1" LOGICAL 0/0 (proto_version '4', origin 'any', publication_names '"pub1"')
PG:2024-06-30 21:37:52.568 GMT [1467972] ERROR: could not find record while sending logically-decoded data: invalid contrecord length 312 (expected 6) at 0/1533FD8
```
## Problem
See https://github.com/neondatabase/cloud/issues/14289
and PR #8210
## Summary of changes
Add test for problems fixed in #8210
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Some of the Nightly benchmarks fail with the error
```
+ /tmp/neon/pg_install/v14/bin/pgbench --version
/tmp/neon/pg_install/v14/bin/pgbench: error while loading shared libraries: libpq.so.5: cannot open shared object file: No such file or directory
```
Originally, we added the `pgbench --version` call to check that
`pgbench` is installed and to fail earlier if it's not.
The failure happens because we don't have `LD_LIBRARY_PATH` set for
every job, and it also affects `psql` command.
We can move it to `actions/run-python-test-set` so as not to duplicate
code (as it already have `LD_LIBRARY_PATH` set).
## Summary of changes
- Remove `pgbench --version` call
- Move `psql` commands to common `actions/run-python-test-set`
part of https://github.com/neondatabase/neon/issues/7418
# Motivation
(reproducing #7418)
When we do an `InMemoryLayer::write_to_disk`, there is a tremendous
amount of random read I/O, as deltas from the ephemeral file (written in
LSN order) are written out to the delta layer in key order.
In benchmarks (https://github.com/neondatabase/neon/pull/7409) we can
see that this delta layer writing phase is substantially more expensive
than the initial ingest of data, and that within the delta layer write a
significant amount of the CPU time is spent traversing the page cache.
# High-Level Changes
Add a new mode for L0 flush that works as follows:
* Read the full ephemeral file into memory -- layers are much smaller
than total memory, so this is afforable
* Do all the random reads directly from this in memory buffer instead of
using blob IO/page cache/disk reads.
* Add a semaphore to limit how many timelines may concurrently do this
(limit peak memory).
* Make the semaphore configurable via PS config.
# Implementation Details
The new `BlobReaderRef::Slice` is a temporary hack until we can ditch
`blob_io` for `InMemoryLayer` => Plan for this is laid out in
https://github.com/neondatabase/neon/issues/8183
# Correctness
The correctness of this change is quite obvious to me: we do what we did
before (`blob_io`) but read from memory instead of going to disk.
The highest bug potential is in doing owned-buffers IO. I refactored the
API a bit in preliminary PR
https://github.com/neondatabase/neon/pull/8186 to make it less
error-prone, but still, careful review is requested.
# Performance
I manually measured single-client ingest performance from `pgbench -i
...`.
Full report:
https://neondatabase.notion.site/2024-06-28-benchmarking-l0-flush-performance-e98cff3807f94cb38f2054d8c818fe84?pvs=4
tl;dr:
* no speed improvements during ingest, but
* significantly lower pressure on PS PageCache (eviction rate drops to
1/3)
* (that's why I'm working on this)
* noticable but modestly lower CPU time
This is good enough for merging this PR because the changes require
opt-in.
We'll do more testing in staging & pre-prod.
# Stability / Monitoring
**memory consumption**: there's no _hard_ limit on max `InMemoryLayer`
size (aka "checkpoint distance") , hence there's no hard limit on the
memory allocation we do for flushing. In practice, we a) [log a
warning](23827c6b0d/pageserver/src/tenant/timeline.rs (L5741-L5743))
when we flush oversized layers, so we'd know which tenant is to blame
and b) if we were to put a hard limit in place, we would have to decide
what to do if there is an InMemoryLayer that exceeds the limit.
It seems like a better option to guarantee a max size for frozen layer,
dependent on `checkpoint_distance`. Then limit concurrency based on
that.
**metrics**: we do have the
[flush_time_histo](23827c6b0d/pageserver/src/tenant/timeline.rs (L3725-L3726)),
but that includes the wait time for the semaphore. We could add a
separate metric for the time spent after acquiring the semaphore, so one
can infer the wait time. Seems unnecessary at this point, though.
Add support for reading and writing zstd-compressed blobs for use in
image layer generation, but maybe one day useful also for delta layers.
The reading of them is unconditional while the writing is controlled by
the `image_compression` config variable allowing for experiments.
For the on-disk format, we re-use some of the bitpatterns we currently
keep reserved for blobs larger than 256 MiB. This assumes that we have
never ever written any such large blobs to image layers.
After the preparation in #7852, we now are unable to read blobs with a
size larger than 256 MiB (or write them).
A non-goal of this PR is to come up with good heuristics of when to
compress a bitpattern. This is left for future work.
Parts of the PR were inspired by #7091.
cc #7879
Part of #5431
## Problem
At high percentiles we see more than 800 layers being visited by the
read path. We need the tenant/timeline to investigate.
## Summary of changes
Add a rate limited log line when the average number of layers visited
per key is in the last specified histogram bucket.
I plan to use this to identify tenants in us-east-2 staging that exhibit
this behaviour. Will revert before next week's release.
Before this PR, during timeline shutdown, we'd occasionally see
log lines like this one:
```
2024-06-26T18:28:11.063402Z INFO initial_size_calculation{tenant_id=$TENANT,shard_id=0000 timeline_id=$TIMELINE}:logical_size_calculation_task:get_or_maybe_download{layer=000000000000000000000000000000000000-000000067F0001A3950001C1630100000000__0000000D88265898}: layer file download failed, and caller has been cancelled: Cancelled, shutting down
Stack backtrace:
0: <core::result::Result<T,F> as core::ops::try_trait::FromResidual<core::result::Result<core::convert::Infallible,E>>>::from_residual
at /rustc/129f3b9964af4d4a709d1383930ade12dfe7c081/library/core/src/result.rs:1964:27
pageserver::tenant::remote_timeline_client::RemoteTimelineClient::download_layer_file::{{closure}}
at /home/nonroot/pageserver/src/tenant/remote_timeline_client.rs:531:13
pageserver::tenant::storage_layer::layer::LayerInner::download_and_init::{{closure}}
at /home/nonroot/pageserver/src/tenant/storage_layer/layer.rs:1136:14
pageserver::tenant::storage_layer::layer::LayerInner::download_init_and_wait::{{closure}}::{{closure}}
at /home/nonroot/pageserver/src/tenant/storage_layer/layer.rs:1082:74
```
We can eliminate the anyhow backtrace with no loss of information
because the conversion to anyhow::Error happens in exactly one place.
refs #7427
## Problem
Tenant attachment has error paths for failures to write local
configuration, but these types of local storage I/O errors should be
considered fatal for the process. Related thread on an earlier PR that
touched this code:
https://github.com/neondatabase/neon/pull/7947#discussion_r1655134114
## Summary of changes
- Make errors writing tenant config fatal (abort process)
- When reading tenant config, make all I/O errors except ENOENT fatal
- Replace use of bare anyhow errors with `LoadConfigError`
Before this PR, `RemoteStorageConfig::from_toml` would support
deserializing an
empty `{}` TOML inline table to a `None`, otherwise try `Some()`.
We can instead let
* in proxy: let clap derive handle the Option
* in PS & SK: assume that if the field is specified, it must be a valid
RemtoeStorageConfig
(This PR started with a much simpler goal of factoring out the
`deserialize_item` function because I need that in another PR).
## Problem
See https://github.com/neondatabase/cloud/issues/14289
## Summary of changes
Check connection status after calling PQconnectStartParams
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
This makes it much more convenient to use in the common case that you
want to flush all the WAL. (Passing pg_current_wal_insert_lsn() as the
argument doesn't work for the same reasons as explained in the comments:
we need to be back off to the beginning of a page if the previous record
ended at page boundary.)
I plan to use this to fix the issue that Arseny Sher called out at
https://github.com/neondatabase/neon/pull/7288#discussion_r1660063852
## Problem
We use `build-tools` image as a base image to build other images, and it
has a pretty old `libpq-dev` installed (v13; it wasn't that old until I
removed system Postgres 14 from `build-tools` image in
https://github.com/neondatabase/neon/pull/6540)
## Summary of changes
- Remove `libpq-dev` from `build-tools` image
- Set `LD_LIBRARY_PATH` for tests (for different Postgres binaries that
we use, like psql and pgbench)
- Set `PQ_LIB_DIR` to build Storage Controller
- Set `LD_LIBRARY_PATH`/`DYLD_LIBRARY_PATH` in the Storage Controller
where it calls Postgres binaries
## Problem
We lack visibility of how much local disk space is used by secondary
tenant locations
Close: https://github.com/neondatabase/neon/issues/8181
## Summary of changes
- Add `pageserver_secondary_resident_physical_size`, tagged by tenant
- Register & de-register label sets from SecondaryTenant
- Add+use wrappers in SecondaryDetail that update metrics when
adding+removing layers/timelines
We have one pretty serious MVCC visibility bug with hot standby
replicas. We incorrectly treat any transactions that are in progress
in the primary, when the standby is started, as aborted. That can
break MVCC for queries running concurrently in the standby. It can
also lead to hint bits being set incorrectly, and that damage can last
until the replica is restarted.
The fundamental bug was that we treated any replica start as starting
from a shut down server. The fix for that is straightforward: we need
to set 'wasShutdown = false' in InitWalRecovery() (see changes in the
postgres repo).
However, that introduces a new problem: with wasShutdown = false, the
standby will not open up for queries until it receives a running-xacts
WAL record from the primary. That's correct, and that's how Postgres
hot standby always works. But it's a problem for Neon, because:
* It changes the historical behavior for existing users. Currently,
the standby immediately opens up for queries, so if they now need to
wait, we can breka existing use cases that were working fine
(assuming you don't hit the MVCC issues).
* The problem is much worse for Neon than it is for standalone
PostgreSQL, because in Neon, we can start a replica from an
arbitrary LSN. In standalone PostgreSQL, the replica always starts
WAL replay from a checkpoint record, and the primary arranges things
so that there is always a running-xacts record soon after each
checkpoint record. You can still hit this issue with PostgreSQL if
you have a transaction with lots of subtransactions running in the
primary, but it's pretty rare in practice.
To mitigate that, we introduce another way to collect the
running-xacts information at startup, without waiting for the
running-xacts WAL record: We can the CLOG for XIDs that haven't been
marked as committed or aborted. It has limitations with
subtransactions too, but should mitigate the problem for most users.
See https://github.com/neondatabase/neon/issues/7236.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
This makes it much more convenient to use in the common case that you
want to flush all the WAL. (Passing pg_current_wal_insert_lsn() as the
argument doesn't work for the same reasons as explained in the
comments: we need to be back off to the beginning of a page if the
previous record ended at page boundary.)
I plan to use this to fix the issue that Arseny Sher called out at
https://github.com/neondatabase/neon/pull/7288#discussion_r1660063852
The 'running' boolean was replaced with a semaphore in commit
f0e2bb79b2, but this initialization was missed. Remove it so that if a
test tries to access it, you get an error rather than always claiming
that the endpoint is not running.
Spotted by Arseny at
https://github.com/neondatabase/neon/pull/7288#discussion_r1660068657
Reverts neondatabase/neon#7956
Rationale: compute incompatibilties
Slack thread:
https://neondb.slack.com/archives/C033RQ5SPDH/p1718011276665839?thread_ts=1718008160.431869&cid=C033RQ5SPDH
Relevant quotes from @hlinnaka
> If we go through with the current release candidate, but the compute
is pinned, people who create new projects will get that warning, which
is silly. To them, it looks like the ICU version was downgraded, because
initdb was run with newer version.
> We should upgrade the ICU version eventually. And when we do that,
users with old projects that use ICU will start to see that warning. I
think that's acceptable, as long as we do homework, notify users, and
communicate that properly.
> When do that, we should to try to upgrade the storage and compute
versions at roughly the same time.
## Problem
See https://github.com/neondatabase/cloud/issues/10845
## Summary of changes
Do not report error if GIN page is not restored
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
After [0e4f182680] which introduce async
connect
Neon is not able to connect to page server.
## Summary of changes
Perform sync commit at MacOS/X
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
"John pointed out that the switch to protocol version 2 made
test_gc_aggressive test flaky:
https://github.com/neondatabase/neon/issues/7692.
I tracked it down, and that is indeed an issue. Conditions for hitting
the issue:
The problem occurs in the primary
GC horizon is set to a very low value, e.g. 0.
If the primary is actively writing WAL, and GC runs in the pageserver at
the same time that the primary sends a GetPage request, it's possible
that the GC advances the GC horizon past the GetPage request's LSN. I'm
working on a fix here: https://github.com/neondatabase/neon/pull/7708."
- Heikki
## Summary of changes
Use protocol version 1 as default.
## Problem
- #7451
INIT_FORKNUM blocks must be stored on shard 0 to enable including them
in basebackup.
This issue can be missed in simple tests because creating an unlogged
table isn't sufficient -- to repro I had to create an _index_ on an
unlogged table (then restart the endpoint).
Closes: #7451
## Summary of changes
- Add a reproducer for the issue.
- Tweak the condition for `key_is_shard0` to include anything that isn't
a normal relation block _and_ any normal relation block whose forknum is
INIT_FORKNUM.
- To enable existing databases to recover from the issue, add a special
case that omits relations if they were stored on the wrong INITFORK.
This enables postgres to start and the user to drop the table and
recreate it.
Part of neondatabase/cloud#12047.
The basic idea is that for our VMs, we want to enable swap and disable
Linux memory overcommit. Alongside these, we should set postgres'
dynamic_shared_memory_type to mmap, but we want to avoid setting it to
mmap if swap is not enabled.
Implementing this in the control plane would be fiddly, but it's
relatively straightforward to add to compute_ctl.
Manual testing of the changes in #7160 revealed that, if the
thread-local destructor ever runs (it apparently doesn't in our test
suite runs, otherwise #7160 would not have auto-merged), we can
encounter an `abort()` due to a double-panic in the tracing code.
This github comment here contains the stack trace:
https://github.com/neondatabase/neon/pull/7160#issuecomment-2003778176
This PR reverts #7160 and uses a atomic counter to identify the
thread-local in log messages, instead of the memory address of the
thread local, which may be re-used.
The PR #7141 added log message
```
ThreadLocalState is being dropped and id might be re-used in the future
```
which was supposed to be emitted when the thread-local is destroyed.
Instead, it was emitted on _each_ call to `thread_local_system()`,
ie.., on each tokio-epoll-uring operation.
## Problem
Previously we always wrote out both legacy and modern tenant config
files. The legacy write enabled rollbacks, but we are long past the
point where that is needed.
We still need the legacy format for situations where someone is running
tenants without generations (that will be yanked as well eventually),
but we can avoid writing it out at all if we do have a generation number
set. We implicitly also avoid writing the legacy config if our mode is
Secondary (secondary mode is newer than generations).
## Summary of changes
- Make writing legacy tenant config conditional on there being no
generation number set.
## Problem
In a recent refactor, we accidentally dropped the cancel session early
## Summary of changes
Hold the cancel session during proxy passthrough
## Problem
Not really a problem, just refactoring.
## Summary of changes
Separate authenticate from wake compute.
Do not call wake compute second time if we managed to connect to
postgres or if we got it not from cache.
## Problem
hard to see where time is taken during HTTP flow.
## Summary of changes
add a lot more for query state. add a conn_id field to the sql-over-http
span
## Problem
`tokio::io::copy_bidirectional` doesn't close the connection once one of
the sides closes it. It's not really suitable for the postgres protocol.
## Summary of changes
Fork `copy_bidirectional` and initiate a shutdown for both connections.
---------
Co-authored-by: Conrad Ludgate <conradludgate@gmail.com>
There is currently no cleanup done after a delta layer creation error,
so delta layers can accumulate. The problem gets worse as the operation
gets retried and delta layers accumulate on the disk. Therefore, delete
them from disk (if something has been written to disk).
## Problem
When a tenant is in Attaching state, and waiting for the
`concurrent_tenant_warmup` semaphore, it also listens for the tenant
cancellation token. When that token fires, Tenant::attach drops out.
Meanwhile, Tenant::set_stopping waits forever for the tenant to exit
Attaching state.
Fixes: https://github.com/neondatabase/neon/issues/6423
## Summary of changes
- In the absence of a valid state for the tenant, it is set to Broken in
this path. A more elegant solution will require more refactoring, beyond
this minimal fix.
(cherry picked from commit 93572a3e99)
Before this patch, the select! still retured immediately if `futs` was
empty. Must have tested a stale build in my manual testing of #6388.
(cherry picked from commit 15c0df4de7)
To exercise MAX_SEND_SIZE sending from safekeeper; we've had a bug with WAL
records torn across several XLogData messages. Add failpoint to safekeeper to
slow down sending. Also check for corrupted WAL complains in standby log.
Make the test a bit simpler in passing, e.g. we don't need explicit commits as
autocommit is enabled by default.
https://neondb.slack.com/archives/C05L7D1JAUS/p1703774799114719https://github.com/neondatabase/cloud/issues/9057
Otherwise they are left orphaned when compute_ctl is terminated with a
signal. It was invisible most of the time because normally neon_local or k8s
kills postgres directly and then compute_ctl finishes gracefully. However, in
some tests compute_ctl gets stuck waiting for sync-safekeepers which
intentionally never ends because safekeepers are offline, and we want to stop
compute_ctl without leaving orphanes behind.
This is a quite rough approach which doesn't wait for children termination. A
better way would be to convert compute_ctl to async which would make waiting
easy.
Release 2023-12-19
We need to do a config change that requires restarting the pageservers.
Slip in two metrics-related commits that didn't make this week's regularly release.
Pre-merge `git merge --squash` of
https://github.com/neondatabase/neon/pull/6115
Lowering the tracing level in get_value_reconstruct_data and
get_or_maybe_download from info to debug reduces the overhead
of span creation in non-debug environments.
## Problem
#6112 added some logs and metrics: clean these up a bit:
- Avoid counting startup completions for tenants launched after startup
- exclude no-op cases from timing histograms
- remove a rogue log messages
Error indicating request cancellation OR timeline shutdown was deemed as
a reason to exit the background worker that calculated synthetic size.
Fix it to only be considered for avoiding logging such of such errors.
This conflicted on tenant_shard_id having already replaced tenant_id on
`main`.
```
could not start the compute node: compute is in state "failed": db error: ERROR: could not access file "$libdir/timescaledb-2.10.1": No such file or directory Caused by: ERROR: could not access file "$libdir/timescaledb-2.10.1": No such file or directory
```
Only applicable change was neondatabase/autoscaling#584, setting
pgbouncer auth_dbname=postgres in order to fix superuser connections
from preventing dropping databases.
Only applicable change was neondatabase/autoscaling#571, removing the
postgres_exporter flags `--auto-discover-databases` and
`--exclude-databases=...`
## Problem
Logical replication requires new AUX_FILES_KEY which is definitely
absent in existed database.
We do not have function to check if key exists in our KV storage.
So I have to handle the error in `list_aux_files` method.
But this key is also included in key space range and accessed y
`create_image_layer` method.
## Summary of changes
Check if AUX_FILES_KEY exists before including it in keyspace.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Shany Pozin <shany@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Fixes an issue we observed on staging that happens when the
autoscaler-agent attempts to immediately downscale the VM after binding,
which is typical for pooled computes.
The issue was occurring because the autoscaler-agent was requesting
downscaling before the vm-monitor had gathered sufficient cgroup memory
stats to be confident in approving it. When the vm-monitor returned an
internal error instead of denying downscaling, the autoscaler-agent
retried the connection and immediately hit the same issue (in part
because cgroup stats are collected per-connection, rather than
globally).
There's currently an issue with the vm-monitor on staging that's not
really feasible to debug because the current display impl gives no
context to the errors (just says "failed to downscale").
Logging the full error should help.
For communications with the autoscaler-agent, it's ok to only provide
the outermost cause, because we can cross-reference with the VM logs.
At some point in the future, we may want to change that.
tl;dr it's really hard to avoid throttling from memory.high, and it
counts tmpfs & page cache usage, so it's also hard to make sense of.
In the interest of fixing things quickly with something that should be
*good enough*, this PR switches to instead periodically fetch memory
statistics from the cgroup's memory.stat and use that data to determine
if and when we should upscale.
This PR fixes#5444, which has a lot more detail on the difficulties
we've hit with memory.high. This PR also supersedes #5488.
Before this PR, when we restarted pageserver, we'd see a rush of
`$number_of_tenants` concurrent eviction tasks starting to do imitate
accesses building up in the period of `[init_order allows activations,
$random_access_delay + EvictionPolicyLayerAccessThreshold::period]`.
We simply cannot handle that degree of concurrent IO.
We already solved the problem for compactions by adding a semaphore.
So, this PR shares that semaphore for use by evictions.
Part of https://github.com/neondatabase/neon/issues/5479
Which is again part of https://github.com/neondatabase/neon/issues/4743
Risks / Changes In System Behavior
==================================
* we don't do evictions as timely as we currently do
* we log a bunch of warnings about eviction taking too long
* imitate accesses and compactions compete for the same concurrency
limit, so, they'll slow each other down through this shares semaphore
Changes
=======
- Move the `CONCURRENT_COMPACTIONS` semaphore into `tasks.rs`
- Rename it to `CONCURRENT_BACKGROUND_TASKS`
- Use it also for the eviction imitate accesses:
- Imitate acceses are both per-TIMELINE and per-TENANT
- The per-TENANT is done through coalescing all the per-TIMELINE
tasks via a tokio mutex `eviction_task_tenant_state`.
- We acquire the CONCURRENT_BACKGROUND_TASKS permit early, at the
beginning of the eviction iteration, much before the imitate
acesses start (and they may not even start at all in the given
iteration, as they happen only every $threshold).
- Acquiring early is **sub-optimal** because when the per-timline
tasks coalesce on the `eviction_task_tenant_state` mutex,
they are already holding a CONCURRENT_BACKGROUND_TASKS permit.
- It's also unfair because tenants with many timelines win
the CONCURRENT_BACKGROUND_TASKS more often.
- I don't think there's another way though, without refactoring
more of the imitate accesses logic, e.g, making it all per-tenant.
- Add metrics for queue depth behind the semaphore.
I found these very useful to understand what work is queued in the
system.
- The metrics are tagged by the new `BackgroundLoopKind`.
- On a green slate, I would have used `TaskKind`, but we already had
pre-existing labels whose names didn't map exactly to task kind.
Also the task kind is kind of a lower-level detail, so, I think
it's fine to have a separate enum to identify background work kinds.
Future Work
===========
I guess I could move the eviction tasks from a ticker to "sleep for
$period".
The benefit would be that the semaphore automatically "smears" the
eviction task scheduling over time, so, we only have the rush on restart
but a smeared-out rush afterward.
The downside is that this perverts the meaning of "$period", as we'd
actually not run the eviction at a fixed period. It also means the the
"took to long" warning & metric becomes meaningless.
Then again, that is already the case for the compaction and gc tasks,
which do sleep for `$period` instead of using a ticker.
(cherry picked from commit 9256788273)
## Problem
Folks have re-taged releases for `pg_jsonschema` and `pg_graphql` (to
increase timeouts on their CI), for us, these are a noop changes,
but unfortunately, this will cause our builds to fail due to checksums
mismatch (this might not strike right away because of the build cache).
- 8ba7c7be9d
- aa7509370a
## Summary of changes
- `pg_jsonschema` update checksum
- `pg_graphql` update checksum
When you log more than a few blocks, you need to reserve the space in
advance. We didn't do that, so we got errors. Now we do that, and
shouldn't get errors.
## Problem
See https://neondb.slack.com/archives/C05L7D1JAUS/p1694614585955029https://www.notion.so/neondatabase/Duplicate-key-issue-651627ce843c45188fbdcb2d30fd2178
## Summary of changes
Swap old/new block references
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
The sequence that can lead to a deadlock:
1. DELETE request gets all the way to `tenant.shutdown(progress,
false).await.is_err() ` , while holding TENANTS.read()
2. POST request for tenant creation comes in, calls `tenant_map_insert`,
it does `let mut guard = TENANTS.write().await;`
3. Something that `tenant.shutdown()` needs to wait for needs a
`TENANTS.read().await`.
The only case identified in exhaustive manual scanning of the code base
is this one:
Imitate size access does `get_tenant().await`, which does
`TENANTS.read().await` under the hood.
In the above case (1) waits for (3), (3)'s read-lock request is queued
behind (2)'s write-lock, and (2) waits for (1).
Deadlock.
I made a reproducer/proof-that-above-hypothesis-holds in
https://github.com/neondatabase/neon/pull/5281 , but, it's not ready for
merge yet and we want the fix _now_.
fixes https://github.com/neondatabase/neon/issues/5284
## Problem
We were returning Pending when a connection had a notice/notification
(introduced recently in #5020). When returning pending, the runtime
assumes you will call `cx.waker().wake()` in order to continue
processing.
We weren't doing that, so the connection task would get stuck
## Summary of changes
Don't return pending. Loop instead
## Problem
cargo deny lint broken
Links to the CVEs:
[rustsec.org/advisories/RUSTSEC-2023-0052](https://rustsec.org/advisories/RUSTSEC-2023-0052)
[rustsec.org/advisories/RUSTSEC-2023-0053](https://rustsec.org/advisories/RUSTSEC-2023-0053)
One is fixed, the other one isn't so we allow it (for now), to unbreak
CI. Then later we'll try to get rid of webpki in favour of the rustls
fork.
## Summary of changes
```
+ignore = ["RUSTSEC-2023-0052"]
```
## Problem
When an endpoint is shutting down, it can take a few seconds. Currently
when starting a new compute, this causes an "endpoint is in transition"
error. We need to add delays before retrying to ensure that we allow
time for the endpoint to shutdown properly.
## Summary of changes
Adds a delay before retrying in auth. connect_to_compute already has
this delay
commit
commit 5f8fd640bf
Author: Alek Westover <alek.westover@gmail.com>
Date: Wed Jul 26 08:24:03 2023 -0400
Upload Test Remote Extensions (#4792)
switched to using the release tag instead of `latest`, but,
the `promote-images` job only uploads `latest` to the prod ECR.
The switch to using release tag was good in principle, but,
reverting that part to make the release pipeine work.
Note that a proper fix should abandon use of `:latest` tag
at all: currently, if a `main` pipeline runs concurrently
with a `release` pipeline, the `release` pipeline may end
up using the `main` pipeline's images.
## Problem
If we fail to wake up the compute node, a subsequent connect attempt
will definitely fail. However, kubernetes won't fail the connection
immediately, instead it hangs until we timeout (10s).
## Summary of changes
Refactor the loop to allow fast retries of compute_wake and to skip a
connect attempt.
## Problem
#4598 compute nodes are not accessible some time after wake up due to
kubernetes DNS not being fully propagated.
## Summary of changes
Update connect retry mechanism to support handling IO errors and
sleeping for 100ms
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
```
CREATE EXTENSION embedding;
CREATE TABLE t (val real[]);
INSERT INTO t (val) VALUES ('{0,0,0}'), ('{1,2,3}'), ('{1,1,1}'), (NULL);
CREATE INDEX ON t USING hnsw (val) WITH (maxelements = 10, dims=3, m=3);
INSERT INTO t (val) VALUES (array[1,2,4]);
SELECT * FROM t ORDER BY val <-> array[3,3,3];
val
---------
{1,2,3}
{1,2,4}
{1,1,1}
{0,0,0}
(5 rows)
```
The consumption metrics synthetic size worker does logical size calculation.
Logical size calculation currently does synchronous disk IO.
This blocks the MGMT_REQUEST_RUNTIME's executor threads, starving other futures.
While there's work on the way to move the synchronous disk IO into spawn_blocking,
the quickfix here is to use the BACKGROUND_RUNTIME instead of MGMT_REQUEST_RUNTIME.
Actually it's not just a quickfix. We simply shouldn't be blocking MGMT_REQUEST_RUNTIME
executor threads on CPU or sync disk IO.
That work isn't done yet, as many of the mgmt tasks still _do_ disk IO.
But it's not as intensive as the logical size calculations that we're fixing here.
While we're at it, fix disk-usage-based eviction in a similar way.
It wasn't the culprit here, according to prod logs, but it can theoretically be
a little CPU-intensive.
More context, including graphs from Prod:
https://neondb.slack.com/archives/C03F5SM1N02/p1687541681336949
(cherry picked from commit d6e35222ea)
This commit introduces an SQL-over-HTTP endpoint in the proxy, with a JSON
response structure resembling that of the node-postgres driver. This method,
using HTTP POST, achieves smaller amortized latencies in edge setups due to
fewer round trips and an enhanced open connection reuse by the v8 engine.
This update involves several intricacies:
1. SQL injection protection: We employed the extended query protocol, modifying
the rust-postgres driver to send queries in one roundtrip using a text
protocol rather than binary, bypassing potential issues like those identified
in https://github.com/sfackler/rust-postgres/issues/1030.
2. Postgres type compatibility: As not all postgres types have binary
representations (e.g., acl's in pg_class), we adjusted rust-postgres to
respond with text protocol, simplifying serialization and fixing queries with
text-only types in response.
3. Data type conversion: Considering JSON supports fewer data types than
Postgres, we perform conversions where possible, passing all other types as
strings. Key conversions include:
- postgres int2, int4, float4, float8 -> json number (NaN and Inf remain
text)
- postgres bool, null, text -> json bool, null, string
- postgres array -> json array
- postgres json and jsonb -> json object
4. Alignment with node-postgres: To facilitate integration with js libraries,
we've matched the response structure of node-postgres, returning command tags
and column oids. Command tag capturing was added to the rust-postgres
functionality as part of this change.
## Problem
Compatibility tests don't support Postgres 15 yet, but we're still
trying to upload compatibility snapshot (which we do not collect).
Ref
https://github.com/neondatabase/neon/actions/runs/4991394158/jobs/8940369368#step:4:38129
## Summary of changes
Add `pg_version` parameter to `run-python-test-set` actions and do not
upload compatibility snapshot for Postgres 15
This reverts commit 732acc5.
Reverted PR: #3869
As noted in PR #4094, we do in fact try to insert duplicates to the
layer map, if L0->L1 compaction is interrupted. We do not have a proper
fix for that right now, and we are in a hurry to make a release to
production, so revert the changes related to this to the state that we
have in production currently. We know that we have a bug here, but
better to live with the bug that we've had in production for a long
time, than rush a fix to production without testing it in staging first.
Cc: #4094, #4088
Otherwise they get lost. Normally buffer is empty before proxy pass, but this is
not the case with pipeline mode of out npm driver; fixes connection hangup
introduced by b80fe41af3 for it.
fixes https://github.com/neondatabase/neon/issues/3822
## Describe your changes
We have previously changed the neon-proxy to use RollingUpdate. This
should be enabled in legacy proxy too in order to avoid breaking
connections for the clients and allow for example backups to run even
during deployment. (https://github.com/neondatabase/neon/pull/3683)
## Issue ticket number and link
https://github.com/neondatabase/neon/issues/3333
## Describe your changes
Rebase vendored PostgreSQL onto 14.7 and 15.2
## Issue ticket number and link
#3579
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [x] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
```
The version of PostgreSQL that we use is updated to 14.7 for PostgreSQL
14 and 15.2 for PostgreSQL 15.
```
previously we applied the ratelimiting only up to receiving the headers
from s3, or somewhere near it. the commit adds an adapter which carries
the permit until the AsyncRead has been disposed.
fixes#3662.
Calculation of logical size is now async because of layer downloads, so
we shouldn't use spawn_blocking for it. Use of `spawn_blocking`
exhausted resources which are needed by `tokio::io::copy` when copying
from a stream to a file which lead to deadlock.
Fixes: #3657
these are happening in tests because of #3655 but they sure took some
time to appear.
makes the `Compaction failed, retrying in 2s: Cannot run compaction
iteration on inactive tenant` into a globally allowed error, because it
has been seen failing on different test cases.
Small changes, but hopefully this will help with the panic detected in
staging, for which we cannot get the debugging information right now
(end-of-branch before branch-point).
Before only the timelines which have passed the `gc_horizon` were
processed which failed with orphans at the tree_sort phase. Example
input in added `test_branched_empty_timeline_size` test case.
The PR changes iteration to happen through all timelines, and in
addition to that, any learned branch points will be calculated as they
would had been in the original implementation if the ancestor branch had
been over the `gc_horizon`.
This also changes how tenants where all timelines are below `gc_horizon`
are handled. Previously tenant_size 0 was returned, but now they will
have approximately `initdb_lsn` worth of tenant_size.
The PR also adds several new tenant size tests that describe various corner
cases of branching structure and `gc_horizon` setting.
They are currently disabled to not consume time during CI.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Previously, we were trying to re-assign owned objects of the already
deleted role. This were causing a crash loop in the case when compute
was restarted with a spec that includes delta operation for role
deletion. To avoid such cases, check that role is still present before
calling `reassign_owned_objects`.
Resolvesneondatabase/cloud#3553
This reverts commit 826e89b9ce.
The problem with that commit was that it deletes the TempDir while
there are still EphemeralFile instances open.
At first I thought this could be fixed by simply adding
Handle::current().block_on(task_mgr::shutdown(None, Some(tenant_id), None))
to TenantHarness::drop, but it turned out to be insufficient.
So, reverting the commit until we find a proper solution.
refs https://github.com/neondatabase/neon/issues/3385
Refactors Compute::prepare_and_run. It's split into subroutines
differently, to make it easier to attach tracing spans to the
different stages. The high-level logic for waiting for Postgres to
exit is moved to the caller.
Replace 'env_logger' with 'tracing', and add `#instrument` directives
to different stages fo the startup process. This is a fairly
mechanical change, except for the changes in 'spec.rs'. 'spec.rs'
contained some complicated formatting, where parts of log messages
were printed directly to stdout with `print`s. That was a bit messed
up because the log normally goes to stderr, but those lines were
printed to stdout. In our docker images, stderr and stdout both go to
the same place so you wouldn't notice, but I don't think it was
intentional.
This changes the log format to the default
'tracing_subscriber::format' format. It's different from the Postgres
log format, however, and because both compute_tools and Postgres print
to the same log, it's now a mix of two different formats. I'm not
sure how the Grafana log parsing pipeline can handle that. If it's a
problem, we can build custom formatter to change the compute_tools log
format to be the same as Postgres's, like it was before this commit,
or we can change the Postgres log format to match tracing_formatter's,
or we can start printing compute_tool's log output to a different
destination than Postgres
IMDSv2 has limits, and if we query it on every s3 interaction we are
going to go over those limits. Changes the s3_bucket client
configuration to use:
- ChainCredentialsProvider to handle env variables or imds usage
- LazyCachingCredentialsProvider to actually cache any credentials
Related: https://github.com/awslabs/aws-sdk-rust/issues/629
Possibly related: https://github.com/neondatabase/neon/issues/3118
plv8 can only be built with a fairly new gold linker version. We used to install
it via binutils packages from testing, but it also updates libc and that causes
troubles in the resulting image as different extensions were built against
different libc versions. We could either use libc from debian-testing everywhere
or restrain from using testing packages and install necessary programs manually.
This patch uses the latter approach: gold for plv8 and cmake for h3 are
installed manually.
In a passing declare h3_postgis as a safe extension (previous omission).
`GRANT CREATE ON SCHEMA public` fails if there is no schema `public`.
Disable it in release for now and make a better fix later (it is
needed for v15 support).
* Check for entire range during sasl validation (#2281)
* Gen2 GH runner (#2128)
* Re-add rustup override
* Try s3 bucket
* Set git version
* Use v4 cache key to prevent problems
* Switch to v5 for key
* Add second rustup fix
* Rebase
* Add kaniko steps
* Fix typo and set compress level
* Disable global run default
* Specify shell for step
* Change approach with kaniko
* Try less verbose shell spec
* Add submodule pull
* Add promote step
* Adjust dependency chain
* Try default swap again
* Use env
* Don't override aws key
* Make kaniko build conditional
* Specify runs on
* Try without dependency link
* Try soft fail
* Use image with git
* Try passing to next step
* Fix duplicate
* Try other approach
* Try other approach
* Fix typo
* Try other syntax
* Set env
* Adjust setup
* Try step 1
* Add link
* Try global env
* Fix mistake
* Debug
* Try other syntax
* Try other approach
* Change order
* Move output one step down
* Put output up one level
* Try other syntax
* Skip build
* Try output
* Re-enable build
* Try other syntax
* Skip middle step
* Update check
* Try first step of dockerhub push
* Update needs dependency
* Try explicit dir
* Add missing package
* Try other approach
* Try other approach
* Specify region
* Use with
* Try other approach
* Add debug
* Try other approach
* Set region
* Follow AWS example
* Try github approach
* Skip Qemu
* Try stdin
* Missing steps
* Add missing close
* Add echo debug
* Try v2 endpoint
* Use v1 endpoint
* Try without quotes
* Revert
* Try crane
* Add debug
* Split steps
* Fix duplicate
* Add shell step
* Conform to options
* Add verbose flag
* Try single step
* Try workaround
* First request fails hunch
* Try bullseye image
* Try other approach
* Adjust verbose level
* Try previous step
* Add more debug
* Remove debug step
* Remove rogue indent
* Try with larger image
* Add build tag step
* Update workflow for testing
* Add tag step for test
* Remove unused
* Update dependency chain
* Add ownership fix
* Use matrix for promote
* Force update
* Force build
* Remove unused
* Add new image
* Add missing argument
* Update dockerfile copy
* Update Dockerfile
* Update clone
* Update dockerfile
* Go to correct folder
* Use correct format
* Update dockerfile
* Remove cd
* Debug find where we are
* Add debug on first step
* Changedir to postgres
* Set workdir
* Use v1 approach
* Use other dependency
* Try other approach
* Try other approach
* Update dockerfile
* Update approach
* Update dockerfile
* Update approach
* Update dockerfile
* Update dockerfile
* Add workspace hack
* Update Dockerfile
* Update Dockerfile
* Update Dockerfile
* Change last step
* Cleanup pull in prep for review
* Force build images
* Add condition for latest tagging
* Use pinned version
* Try without name value
* Remove more names
* Shorten names
* Add kaniko comments
* Pin kaniko
* Pin crane and ecr helper
* Up one level
* Switch to pinned tag for rust image
* Force update for test
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@b04468bf-cdf4-41eb-9c94-aff4ca55e4bf.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@Rorys-Mac-Studio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@4795e9ee-4f32-401f-85f3-f316263b62b8.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@2f8bc4e5-4ec2-4ea2-adb1-65d863c4a558.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@27565b2b-72d5-4742-9898-a26c9033e6f9.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@ecc96c26-c6c4-4664-be6e-34f7c3f89a3c.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@7caff3a5-bf03-4202-bd0e-f1a93c86bdae.fritz.box>
* Add missing step output, revert one deploy step (#2285)
* Add missing step output, revert one deploy step
* Conform to syntax
* Update approach
* Add missing value
* Add missing needs
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Error for fatal not git repo (#2286)
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Use main, not branch for ref check (#2288)
* Use main, not branch for ref check
* Add more debug
* Count main, not head
* Try new approach
* Conform to syntax
* Update approach
* Get full history
* Skip checkout
* Cleanup debug
* Remove more debug
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Fix docker zombie process issue (#2289)
* Fix docker zombie process issue
* Init everywhere
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Fix 1.63 clippy lints (#2282)
* split out timeline metrics, track layer map loading and size calculation
* reset rust cache for clippy run to avoid an ICE
additionally remove trailing whitespaces
* Rename pg_control_ffi.h to bindgen_deps.h, for clarity.
The pg_control_ffi.h name implies that it only includes stuff related to
pg_control.h. That's mostly true currently, but really the point of the
file is to include everything that we need to generate Rust definitions
from.
* Make local mypy behave like CI mypy (#2291)
* Fix flaky pageserver restarts in tests (#2261)
* Remove extra type aliases (#2280)
* Update cachepot endpoint (#2290)
* Update cachepot endpoint
* Update dockerfile & remove env
* Update image building process
* Cannot use metadata endpoint for this
* Update workflow
* Conform to kaniko syntax
* Update syntax
* Update approach
* Update dockerfiles
* Force update
* Update dockerfiles
* Update dockerfile
* Cleanup dockerfiles
* Update s3 test location
* Revert s3 experiment
* Add more debug
* Specify aws region
* Remove debug, add prefix
* Remove one more debug
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* workflows/benchmarking: increase timeout (#2294)
* Rework `init` in pageserver CLI (#2272)
* Do not create initial tenant and timeline (adjust Python tests for that)
* Rework config handling during init, add --update-config to manage local config updates
* Fix: Always build images (#2296)
* Always build images
* Remove unused
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
* Move auto-generated 'bindings' to a separate inner module.
Re-export only things that are used by other modules.
In the future, I'm imagining that we run bindgen twice, for Postgres
v14 and v15. The two sets of bindings would go into separate
'bindings_v14' and 'bindings_v15' modules.
Rearrange postgres_ffi modules.
Move function, to avoid Postgres version dependency in timelines.rs
Move function to generate a logical-message WAL record to postgres_ffi.
* fix cargo test
* Fix walreceiver and safekeeper bugs (#2295)
- There was an issue with zero commit_lsn `reason: LaggingWal { current_commit_lsn: 0/0, new_commit_lsn: 1/6FD90D38, threshold: 10485760 } }`. The problem was in `send_wal.rs`, where we initialized `end_pos = Lsn(0)` and in some cases sent it to the pageserver.
- IDENTIFY_SYSTEM previously returned `flush_lsn` as a physical end of WAL. Now it returns `flush_lsn` (as it was) to walproposer and `commit_lsn` to everyone else including pageserver.
- There was an issue with backoff where connection was cancelled right after initialization: `connected!` -> `safekeeper_handle_db: Connection cancelled` -> `Backoff: waiting 3 seconds`. The problem was in sleeping before establishing the connection. This is fixed by reworking retry logic.
- There was an issue with getting `NoKeepAlives` reason in a loop. The issue is probably the same as the previous.
- There was an issue with filtering safekeepers based on retry attempts, which could filter some safekeepers indefinetely. This is fixed by using retry cooldown duration instead of retry attempts.
- Some `send_wal.rs` connections failed with errors without context. This is fixed by adding a timeline to safekeepers errors.
New retry logic works like this:
- Every candidate has a `next_retry_at` timestamp and is not considered for connection until that moment
- When walreceiver connection is closed, we update `next_retry_at` using exponential backoff, increasing the cooldown on every disconnect.
- When `last_record_lsn` was advanced using the WAL from the safekeeper, we reset the retry cooldown and exponential backoff, allowing walreceiver to reconnect to the same safekeeper instantly.
* on safekeeper registration pass availability zone param (#2292)
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Rory de Zoete <33318916+zoete@users.noreply.github.com>
Co-authored-by: Rory de Zoete <rdezoete@RorysMacStudio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@b04468bf-cdf4-41eb-9c94-aff4ca55e4bf.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@Rorys-Mac-Studio.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@4795e9ee-4f32-401f-85f3-f316263b62b8.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@2f8bc4e5-4ec2-4ea2-adb1-65d863c4a558.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@27565b2b-72d5-4742-9898-a26c9033e6f9.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@ecc96c26-c6c4-4664-be6e-34f7c3f89a3c.fritz.box>
Co-authored-by: Rory de Zoete <rdezoete@7caff3a5-bf03-4202-bd0e-f1a93c86bdae.fritz.box>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Anton Galitsyn <agalitsyn@users.noreply.github.com>
* github/workflows: Fix git dubious ownership (#2223)
* Move relation size cache from WalIngest to DatadirTimeline (#2094)
* Move relation sie cache to layered timeline
* Fix obtaining current LSN for relation size cache
* Resolve merge conflicts
* Resolve merge conflicts
* Reestore 'lsn' field in DatadirModification
* adjust DatadirModification lsn in ingest_record
* Fix formatting
* Pass lsn to get_relsize
* Fix merge conflict
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* refactor: replace lazy-static with once-cell (#2195)
- Replacing all the occurrences of lazy-static with `once-cell::sync::Lazy`
- fixes#1147
Signed-off-by: Ankur Srivastava <best.ankur@gmail.com>
* Add more buckets to pageserver latency metrics (#2225)
* ignore record property warning to fix benchmarks
* increase statement timeout
* use event so it fires only if workload thread successfully finished
* remove debug log
* increase timeout to pass test with real s3
* avoid duplicate parameter, increase timeout
* Major migration script (#2073)
This script can be used to migrate a tenant across breaking storage versions, or (in the future) upgrading postgres versions. See the comment at the top for an overview.
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
* Fix etcd typos
* Fix links to safekeeper protocol docs. (#2188)
safekeeper/README_PROTO.md was moved to docs/safekeeper-protocol.md in
commit 0b14fdb078, as part of reorganizing the docs into 'mdbook' format.
Fixes issue #1475. Thanks to @banks for spotting the outdated references.
In addition to fixing the above issue, this patch also fixes other broken links as a result of 0b14fdb078. See https://github.com/neondatabase/neon/pull/2188#pullrequestreview-1055918480.
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Thang Pham <thang@neon.tech>
* Update CONTRIBUTING.md
* Update CONTRIBUTING.md
* support node id and remote storage params in docker_entrypoint.sh
* Safe truncate (#2218)
* Move relation sie cache to layered timeline
* Fix obtaining current LSN for relation size cache
* Resolve merge conflicts
* Resolve merge conflicts
* Reestore 'lsn' field in DatadirModification
* adjust DatadirModification lsn in ingest_record
* Fix formatting
* Pass lsn to get_relsize
* Fix merge conflict
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Update pageserver/src/pgdatadir_mapping.rs
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Check if relation exists before trying to truncat it
refer #1932
* Add test reporducing FSM truncate problem
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
* Fix exponential backoff values
* Update back `vendor/postgres` back; it was changed accidentally. (#2251)
Commit 4227cfc96e accidentally reverted vendor/postgres to an older
version. Update it back.
* Add pageserver checkpoint_timeout option.
To flush inmemory layer eventually when no new data arrives, which helps
safekeepers to suspend activity (stop pushing to the broker). Default 10m should
be ok.
* Share exponential backoff code and fix logic for delete task failure (#2252)
* Fix bug when import large (>1GB) relations (#2172)
Resolves#2097
- use timeline modification's `lsn` and timeline's `last_record_lsn` to determine the corresponding LSN to query data in `DatadirModification::get`
- update `test_import_from_pageserver`. Split the test into 2 variants: `small` and `multisegment`.
+ `small` is the old test
+ `multisegment` is to simulate #2097 by using a larger number of inserted rows to create multiple segment files of a relation. `multisegment` is configured to only run with a `release` build
* Fix timeline physical size flaky tests (#2244)
Resolves#2212.
- use `wait_for_last_flush_lsn` in `test_timeline_physical_size_*` tests
## Context
Need to wait for the pageserver to catch up with the compute's last flush LSN because during the timeline physical size API call, it's possible that there are running `LayerFlushThread` threads. These threads flush new layers into disk and hence update the physical size. This results in a mismatch between the physical size reported by the API and the actual physical size on disk.
### Note
The `LayerFlushThread` threads are processed **concurrently**, so it's possible that the above error still persists even with this patch. However, making the tests wait to finish processing all the WALs (not flushing) before calculating the physical size should help reduce the "flakiness" significantly
* postgres_ffi/waldecoder: validate more header fields
* postgres_ffi/waldecoder: remove unused startlsn
* postgres_ffi/waldecoder: introduce explicit `enum State`
Previously it was emulated with a combination of nullable fields.
This change should make the logic more readable.
* disable `test_import_from_pageserver_multisegment` (#2258)
This test failed consistently on `main` now. It's better to temporarily disable it to avoid blocking others' PRs while investigating the root cause for the test failure.
See: #2255, #2256
* get_binaries uses DOCKER_TAG taken from docker image build step (#2260)
* [proxy] Rework wire format of the password hack and some errors (#2236)
The new format has a few benefits: it's shorter, simpler and
human-readable as well. We don't use base64 anymore, since
url encoding got us covered.
We also show a better error in case we couldn't parse the
payload; the users should know it's all about passing the
correct project name.
* test_runner/pg_clients: collect docker logs (#2259)
* get_binaries script fix (#2263)
* get_binaries uses DOCKER_TAG taken from docker image build step
* remove docker tag discovery at all and fix get_binaries for version variable
* Better storage sync logs (#2268)
* Find end of WAL on safekeepers using WalStreamDecoder.
We could make it inside wal_storage.rs, but taking into account that
- wal_storage.rs reading is async
- we don't need s3 here
- error handling is different; error during decoding is normal
I decided to put it separately.
Test
cargo test test_find_end_of_wal_last_crossing_segment
prepared earlier by @yeputons passes now.
Fixes https://github.com/neondatabase/neon/issues/544https://github.com/neondatabase/cloud/issues/2004
Supersedes https://github.com/neondatabase/neon/pull/2066
* Improve walreceiver logic (#2253)
This patch makes walreceiver logic more complicated, but it should work better in most cases. Added `test_wal_lagging` to test scenarios where alive safekeepers can lag behind other alive safekeepers.
- There was a bug which looks like `etcd_info.timeline.commit_lsn > Some(self.local_timeline.get_last_record_lsn())` filtered all safekeepers in some strange cases. I removed this filter, it should probably help with #2237
- Now walreceiver_connection reports status, including commit_lsn. This allows keeping safekeeper connection even when etcd is down.
- Safekeeper connection now fails if pageserver doesn't receive safekeeper messages for some time. Usually safekeeper sends messages at least once per second.
- `LaggingWal` check now uses `commit_lsn` directly from safekeeper. This fixes the issue with often reconnects, when compute generates WAL really fast.
- `NoWalTimeout` is rewritten to trigger only when we know about the new WAL and the connected safekeeper doesn't stream any WAL. This allows setting a small `lagging_wal_timeout` because it will trigger only when we observe that the connected safekeeper has stuck.
* increase timeout in wait_for_upload to avoid spurious failures when testing with real s3
* Bump vendor/postgres to include XLP_FIRST_IS_CONTRECORD fix. (#2274)
* Set up a workflow to run pgbench against captest (#2077)
Signed-off-by: Ankur Srivastava <best.ankur@gmail.com>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@garret.ru>
Co-authored-by: Heikki Linnakangas <heikki@zenith.tech>
Co-authored-by: Ankur Srivastava <ansrivas@users.noreply.github.com>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Thang Pham <thang@neon.tech>
Co-authored-by: Stas Kelvich <stas.kelvich@gmail.com>
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
Co-authored-by: Egor Suvorov <egor@neon.tech>
Co-authored-by: Andrey Taranik <andrey@cicd.team>
Co-authored-by: Dmitry Ivanov <ivadmi5@gmail.com>
[HOTFIX] Release deploy fix
This PR uses this branch neondatabase/postgres#171 and several required commits from the main to use only locally built compute-tools. This should allow us to rollout safekeepers sync issue fix on prod
storage_broker={version="0.1",path="./storage_broker/"}# Note: main broker code is inside the binary crate, so linking with the library shouldn't be heavy.
@@ -132,7 +132,7 @@ make -j`sysctl -n hw.logicalcpu` -s
To run the `psql` client, install the `postgresql-client` package or modify `PATH` and `LD_LIBRARY_PATH` to include `pg_install/bin` and `pg_install/lib`, respectively.
To run the integration tests or Python scripts (not required to use the code), install
Python (3.9 or higher), and install the python3 packages using `./scripts/pysync` (requires [poetry>=1.8](https://python-poetry.org/)) in the project directory.
Python (3.11 or higher), and install the python3 packages using `./scripts/pysync` (requires [poetry>=1.8](https://python-poetry.org/)) in the project directory.
RUN curl -fsSL "https://github.com/protocolbuffers/protobuf/releases/download/v${PROTOC_VERSION}/protoc-${PROTOC_VERSION}-linux-$(uname -m | sed 's/aarch64/aarch_64/g').zip" -o "protoc.zip"\
@@ -72,9 +138,9 @@ RUN curl -sL "https://github.com/peak/s5cmd/releases/download/v${S5CMD_VERSION}/
&& mv s5cmd /usr/local/bin/s5cmd
# LLVM
ENVLLVM_VERSION=18
ENVLLVM_VERSION=19
RUN curl -fsSL 'https://apt.llvm.org/llvm-snapshot.gpg.key'| apt-key add - \
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
