## Problem
In control_plane, the local SSL certificate generation uses `ed25519`,
but the comment still remained `rsa:2048`, resulting in a mismatch.
This mismatch was introduced in #11542.
## Summary of changes
The comment has been corrected from `rsa:2048` to `ed25519` to ensure
consistency with the implementation.
## Problem
Control_plane shows incorrect file path when identity.toml file open
fails.
## Summary of changes
In the error context, when writing identity.toml, I changed it to use
identity_file_path instead of config_file_path.
## Problem
Neon's storage system currently has hard-coded 512-byte block size for
Direct IO operations, which causes I/O errors on systems with disks that
have 4096-byte block sizes.
This results in errors like "vec read failed" and "Invalid argument (os
error 22)" on certain hardware configurations.
See issue #12623 for details.
## Summary of changes
Make Direct IO alignment configurable at build time to support both
512-byte and 4096-byte block sizes:
- Add `io-align-512` and `io-align-4k` cargo features (default: 512-byte
for backward compatibility)
- Make `DEFAULT_IO_BUFFER_ALIGNMENT` configurable via cargo features in
`pageserver_api`
- Update `DIO_CHUNK_SIZE` in vectored_dio_read to use the configured
alignment value dynamically
- Add `IO_ALIGNMENT` build argument to Dockerfile to allow building
images with different alignment settings
- Add startup logging to display the configured IO buffer alignment for
operational visibility
- Fix validation logic in `virtual_file.rs` to use the configured
alignment instead of hard-coded 512
This change allows Neon to run on systems with different disk block
sizes by building with the appropriate feature flag, addressing the
compatibility issues described in the RFC on Direct IO implementation
## Performance Note
Benchmarks show 512-byte alignment performs significantly better than
4k:
- Write: 512-byte is 21-71% faster across percentiles (p99: 71% faster)
- Read: 512-byte is slightly faster (5-21% improvement)
This is why 512-byte remains the default.
However, some storage systems require 4k alignment and will fail with
EINVAL otherwise. This change adds build-time configuration to support
both environments.
## Problem
We are currently using GCS through the AWS API instead of directly to
the GCS API.
## Summary of changes
Draft implementation of a GCS provider. We run Neon on GCS with the AWS
provider via [this
patch](https://github.com/neondatabase/neon/pull/10277), but want to use
GCS API directly. This implementation attempts to do so without adding a
GCS library dependency or new SDK, except for `gcp_auth`.
## Problem
rest broker needs to respond with the correct cors headers for the api
to be usable from other domains
## Summary of changes
added a code path in rest broker to handle the OPTIONS requests
---------
Co-authored-by: Ruslan Talpa <ruslan.talpa@databricks.com>
## Problem
Right now if we commit a joint configuration to DB, there is no way
back. The only way to get the clean mconf is to continue the migration.
The RFC also described an abort mechanism, which allows to abort current
migration and revert mconf change. It might be needed if the migration
is stuck and cannot have any progress, e.g. if the sk we are migrating
to went down during the migration. This PR implements this abort
algorithm.
- Closes: https://databricks.atlassian.net/browse/LKB-899
- Closes: https://github.com/neondatabase/neon/issues/12549
## Summary of changes
- Implement `safekeeper_migrate_abort` handler with the algorithm
described in RFC
- Add `timeline-safekeeper-migrate-abort` subcommand to `storcon_cli`
- Add test for the migration abort algorithm.
- Return sub-actions time spans for prewarm, prewarm offload, and
promotion in http handlers.
- Set `synchronous_standby_names=walproposer` for promoted endpoints.
Otherwise, walproposer on promoted standby ignores reply from safekeeper
and is stuck on lsn COMMIT eternally.
Commit 1dce2a9e74 changed how the `neon.pageserver_connstring` setting
is formed, but it messed up setting the `neon.stripe_size` setting so
that it was set twice. That got mixed up during development of the
patch, as commit 7fef4435c1 landed first and was merged incorrectly.
Clap automatically uses doc comments as help/about texts. Doc comments
are strictly better, since they're also used e.g. for IDE documentation,
and are better formatted.
This patch updates all `neon_local` commands to use doc comments
(courtesy of GPT-o3).
## Problem
I discovered two bugs corresponding to safekeeper migration, which
together might lead to a data loss during the migration. The second bug
is from a hadron patch and might lead to a data loss during the
safekeeper restore in hadron as well.
1. `switch_membership` returns the current `term` instead of
`last_log_term`. It is used to choose the `sync_position` in the
algorithm, so we might choose the wrong one and break the correctness
guarantees.
2. The current `term` is used to choose the most advanced SK in
`pull_timeline` with higher priority than `flush_lsn`. It is incorrect
because the most advanced safekeeper is the one with the highest
`(last_log_term, flush_lsn)` pair. The compute might bump term on the
least advanced sk, making it the best choice to pull from, and thus
making committed log entries "uncommitted" after `pull_timeline`
Part of https://databricks.atlassian.net/browse/LKB-1017
## Summary of changes
- Return `last_log_term` in `switch_membership`
- Use `(last_log_term, flush_lsn)` as a primary key for choosing the
most advanced sk in `pull_timeline` and deny pulling if the `max_term`
is higher than on the most advanced sk (hadron only)
- Write tests for both cases
- Retry `sync_safekeepers` in `compute_ctl`
- Take into the account the quorum size when calculating `sync_position`
## Problem
The deletion logic had become difficult to understand and maintain.
## Summary of changes
- Added an RFC detailing proposed improvements to all deletion-related
APIs.
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
Add DELETE /lfc/prewarm route which handles ongoing prewarm
cancellation, update API spec, add prewarm Cancelled state
Add offload Cancelled state when LFC is not initialized
These lines are a significant fraction of the total log size of the
regression tests. And it seems very uninteresting, it's always
'localhost' in local tests.
## Problem
In #12268, we added Pageserver gRPC addresses to the storage controller.
However, we didn't actually persist these in the database.
## Summary of changes
Update the database with the new gRPC address on reattach.
Today we don't have any indications (other than spammy logs in PG that
nobody monitors) if the Walproposer in PG cannot connect to/get votes
from all Safekeepers. This means we don't have signals indicating that
the Safekeepers are operating at degraded redundancy. We need these
signals.
Added plumbing in PG extension so that the `neon_perf_counters` view
exports the following gauge metrics on safekeeper health:
- `num_configured_safekeepers`: The total number of safekeepers
configured in PG.
- `num_active_safekeepers`: The number of safekeepers that PG is
actively streaming WAL to.
An alert should be raised whenever `num_active_safekeepers` <
`num_configured_safekeepers`.
The metrics are implemented by adding additional state to the
Walproposer shared memory keeping track of the active statuses of
safekeepers using a simple array. The status of the safekeeper is set to
active (1) after the Walproposer acquires a quorum and starts streaming
data to the safekeeper, and is set to inactive (0) when the connection
with a safekeeper is shut down. We scan the safekeeper status array in
Walproposer shared memory when collecting the metrics to produce results
for the gauges.
Added coverage for the metrics to integration test
`test_wal_acceptor.py::test_timeline_disk_usage_limit`.
## Problem
## Summary of changes
---------
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
```
postgres=> select neon.prewarm_local_cache('\xfcfcfcfc01000000ffffffff070000000000000000000000000000000000000000000000000000000000000000000000000000ff', 1);
WARNING: terminating connection because of crash of another server process
DETAIL: The postmaster has commanded this server process to roll back the current transaction and exit, because another server process exited abnormally and possibly corrupted shared memory.
HINT: In a moment you should be able to reconnect to the database and repeat your command.
FATAL: server conn crashed?
```
The function takes a bytea argument and casts it to a C struct, without
validating the contents.
## Summary of changes
Added validation for number of pages to be prefetched and for the chunks
as well.
## Problem
when compiled with rest_broker feature and is_rest_broker=true (but
is_auth_broker=false) accept_jwts is set to false
## Summary of changes
set the config with
```
accept_jwts: args.is_auth_broker || args.is_rest_broker
```
Co-authored-by: Ruslan Talpa <ruslan.talpa@databricks.com>
Add a new 'pageserver_connection_info' field in the compute spec. It
replaces the old 'pageserver_connstring' field with a more complicated
struct that includes both libpq and grpc URLs, for each shard (or only
one of the the URLs, depending on the configuration). It also includes a
flag suggesting which one to use; compute_ctl now uses it to decide
which protocol to use for the basebackup.
This is backwards-compatible with everything that's in production. If
the control plane fills in `pageserver_connection_info`, compute_ctl
uses that. If it fills in the
`pageserver_connstring`/`shard_stripe_size` fields, it uses those. As
last resort, it uses the 'neon.pageserver_connstring' GUC from the list
of Postgres settings.
The 'grpc' flag in the endpoint config is now more of a suggestion, and
it's used to populate the 'prefer_protocol' flag in the compute spec.
Regardless of the flag, compute_ctl gets both URLs, so it can choose to
use libpq or grpc as it wishes. It currently always obeys the flag to
choose which method to use for getting the basebackup, but Postgres
itself will always use the libpq protocol. (That will be changed with
the new rust-based communicator project, which implements the gRPC
client in the compute).
After that, the `pageserver_connection_info.prefer_protocol` flag in the
spec file can be used to control whether compute_ctl uses grpc or libpq.
The actual compute's grpc usage will be controlled by the
`neon.enable_new_communicator` GUC (not yet; that will be introduced in
the future, with the new rust-base communicator project). It can be set
separately from 'prefer_protocol'.
Later:
- Once all old computes are gone, remove the code to pass
`neon.pageserver_connstring`
… walproposer (#895)
Data corruptions are typically detected on the pageserver side when it
replays WAL records. However, since PS doesn't synchronously replay WAL
records as they are being ingested through safekeepers, we need some
extra plumbing to feed information about pageserver-detected corruptions
during compaction (and/or WAL redo in general) back to SK and PG for
proper action.
We don't yet know what actions PG/SK should take upon receiving the
signal, but we should have the detection and feedback in place.
Add an extra `corruption_detected` field to the `PageserverFeedback`
message that is sent from PS -> SK -> PG. It's a boolean value that is
set to true when PS detects a "critical error" that signals data
corruption, and it's sent in all `PageserverFeedback` messages. Upon
receiving this signal, the safekeeper raises a
`safekeeper_ps_corruption_detected` gauge metric (value set to 1). The
safekeeper then forwards this signal to PG where a
`ps_corruption_detected` gauge metric (value also set to 1) is raised in
the `neon_perf_counters` view.
Added an integration test in
`test_compaction.py::test_ps_corruption_detection_feedback` that
confirms that the safekeeper and PG can receive the data corruption
signal in the `PageserverFeedback` message in a simulated data
corruption.
## Problem
## Summary of changes
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Add a `SplitError` for `GetPageSplitter`, with an `Into<tonic::Status>`
implementation. This avoids a bunch of boilerplate to convert
`GetPageSplitter` errors into `tonic::Status`.
Requires #12702.
Touches [LKB-191](https://databricks.atlassian.net/browse/LKB-191).
## Problem
We don't have visibility into data/index corruption.
## Summary of changes
Add data/index corruptions metrics.
PG calls elog ERROR errcode to emit these corruption errors.
PG Changes: https://github.com/neondatabase/postgres/pull/698
## Problem
During shard splits, each parent shard is split and removed
incrementally. Only when all parent shards have split is the split
committed and the compute notified. This can take several minutes for
large tenants. In the meanwhile, the compute will be sending requests to
the (now-removed) parent shards.
This was (mostly) not a problem for the libpq protocol, because it does
shard routing on the server-side. The compute just sends requests to
some Pageserver, and the server will figure out which local shard should
serve it.
It is a problem for the gRPC protocol, where the client explicitly says
which shard it's talking to.
Touches [LKB-191](https://databricks.atlassian.net/browse/LKB-191).
Requires #12772.
## Summary of changes
* Add server-side routing of gRPC requests to any local child shards if
the parent does not exist.
* Add server-side splitting of GetPage batch requests straddling
multiple child shards.
* Move the `GetPageSplitter` into `pageserver_page_api`.
I really don't like this approach, but it avoids making changes to the
split protocol. I could be convinced we should change the split protocol
instead, e.g. to keep the parent shard alive until the split commits and
the compute has been notified, but we can also do that as a later change
without blocking the communicator on it.
## Problem
Sometimes, the regression test of `pg_repack` fails due to an extra line
in the output.
The most probable cause of this is autovacuum.
https://databricks.atlassian.net/browse/LKB-2637
## Summary of changes
Autovacuum is disabled during the test.
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
If a user provides a wrong database name in the connection string, it
should be logged as a user error, not postgres error.
I found 4 different places where we log such errors:
1. `proxy/src/stream.rs:193`, e.g.:
```
{"timestamp":"2025-07-15T11:33:35.660026Z","level":"INFO","message":"forwarding error to user","fields":{"kind":"postgres","msg":"database \"[redacted]\" does not exist"},"spans":{"connect_request#9":{"protocol":"tcp","session_id":"ce1f2c90-dfb5-44f7-b9e9-8b8535e8b9b8","conn_info":"[redacted]","ep":"[redacted]","role":"[redacted]"}},"thread_id":22,"task_id":"370407867","target":"proxy::stream","src":"proxy/src/stream.rs:193","extract":{"ep":"[redacted]","session_id":"ce1f2c90-dfb5-44f7-b9e9-8b8535e8b9b8"}}
```
2. `proxy/src/pglb/mod.rs:137`, e.g.:
```
{"timestamp":"2025-07-15T11:37:44.340497Z","level":"WARN","message":"per-client task finished with an error: Couldn't connect to compute node: db error: FATAL: database \"[redacted]\" does not exist","spans":{"connect_request#8":{"protocol":"tcp","session_id":"763baaac-d039-4f4d-9446-c149e32660eb","conn_info":"[redacted]","ep":"[redacted]","role":"[redacted]"}},"thread_id":14,"task_id":"866658139","target":"proxy::pglb","src":"proxy/src/pglb/mod.rs:137","extract":{"ep":"[redacted]","session_id":"763baaac-d039-4f4d-9446-c149e32660eb"}}
```
3. `proxy/src/serverless/mod.rs:451`, e.g. (note that the error is
repeated 4 times — retries?):
```
{"timestamp":"2025-07-15T11:37:54.515891Z","level":"WARN","message":"error in websocket connection: Couldn't connect to compute node: db error: FATAL: database \"[redacted]\" does not exist: Couldn't connect to compute node: db error: FATAL: database \"[redacted]\" does not exist: db error: FATAL: database \"[redacted]\" does not exist: FATAL: database \"[redacted]\" does not exist","spans":{"http_conn#8":{"conn_id":"ec7780db-a145-4f0e-90df-0ba35f41b828"},"connect_request#9":{"protocol":"ws","session_id":"1eaaeeec-b671-4153-b1f4-247839e4b1c7","conn_info":"[redacted]","ep":"[redacted]","role":"[redacted]"}},"thread_id":10,"task_id":"366331699","target":"proxy::serverless","src":"proxy/src/serverless/mod.rs:451","extract":{"conn_id":"ec7780db-a145-4f0e-90df-0ba35f41b828","ep":"[redacted]","session_id":"1eaaeeec-b671-4153-b1f4-247839e4b1c7"}}
```
4. `proxy/src/serverless/sql_over_http.rs:219`, e.g.
```
{"timestamp":"2025-07-15T10:32:34.866603Z","level":"INFO","message":"forwarding error to user","fields":{"kind":"postgres","error":"could not connect to postgres in compute","msg":"database \"[redacted]\" does not exist"},"spans":{"http_conn#19":{"conn_id":"7da08203-5dab-45e8-809f-503c9019ec6b"},"connect_request#5":{"protocol":"http","session_id":"68387f1c-cbc8-45b3-a7db-8bb1c55ca809","conn_info":"[redacted]","ep":"[redacted]","role":"[redacted]"}},"thread_id":17,"task_id":"16432250","target":"proxy::serverless::sql_over_http","src":"proxy/src/serverless/sql_over_http.rs:219","extract":{"conn_id":"7da08203-5dab-45e8-809f-503c9019ec6b","ep":"[redacted]","session_id":"68387f1c-cbc8-45b3-a7db-8bb1c55ca809"}}
```
This PR directly addresses 1 and 4. I _think_ it _should_ also help with
2 and 3, although in those places we don't seem to log `kind`, so I'm
not quite sure. I'm also confused why in 3 the error is repeated
multiple times.
## Summary of changes
Resolves https://github.com/neondatabase/neon/issues/9440
## Problem
Part of LKB-2368. Compute fails to obtain LSN lease in this test case.
There're many assumptions around how compute obtains the leases, and in
this particular test case, as the LSN lease length is only 8s (which is
shorter than the amount of time where pageserver can restart and compute
can reconnect in terms of force stop), it sometimes cause issues.
## Summary of changes
Add more sleeps around the test case to ensure it's stable at least. We
need to find a more reliable way to test this in the future.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Fix LKB-2632.
The safekeeper wal read path does not seem to retry at all. This would
cause client read errors on the customer side.
## Summary of changes
- Retry on `safekeeper::wal_backup::read_object`.
- Note that this only retries on S3 HTTP connection errors. Subsequent
reads could fail, and that needs more refactors to make the retry
mechanism work across the path.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Split the functions into two parts: an internal function in file_cache.c
which returns an array of structs representing the result set, and
another function in neon.c with the glue code to expose it as a SQL
function. This is in preparation for the new communicator, which needs
to implement the same SQL functions, but getting the information from a
different place.
In the glue code, use the more modern Postgres way of building a result
set using a tuplestore.
## Problem
In https://github.com/neondatabase/neon/pull/12467, timeouts and retries
were added to `Cache::get` tenant shard resolution to paper over an
issue with read unavailability during shard splits. However, this
retries _all_ errors, including irrecoverable errors like `NotFound`.
This causes problems with gRPC child shard routing in #12702, which
targets specific shards with `ShardSelector::Known` and relies on prompt
`NotFound` errors to reroute requests to child shards. These retries
introduce a 1s delay for all reads during child routing.
The broader problem of read unavailability during shard splits is left
as future work, see https://databricks.atlassian.net/browse/LKB-672.
Touches #12702.
Touches [LKB-191](https://databricks.atlassian.net/browse/LKB-191).
## Summary of changes
* Change `TenantManager` to always return a concrete
`GetActiveTimelineError`.
* Only retry `WaitForActiveTimeout` errors.
* Lots of code unindentation due to the simplified error handling.
Out of caution, we do not gate the retries on `ShardSelector`, since
this can trigger other races. Improvements here are left as future work.
## Problem
Given a container image it is difficult to figure out dependencies and
doesn't work automatically.
## Summary of changes
- Build all rust binaries with `cargo auditable`, to allow sbom scanners
to find it's dependencies.
- Adjust `attests` for `docker/build-push-action`, so that buildkit
creates sbom and provenance attestations.
- Dropping `--locked` for `rustfilt`, because `rustfilt` can't build
with locked dependencies[^5]
## Further details
Building with `cargo auditable`[^1] embeds a dependency list into Linux,
Windows, MacOS and WebAssembly artifacts. A bunch of tools support
discovering dependencies from this, among them `syft`[^2], which is used
by the BuildKit Syft scanner[^3] plugin. This BuildKit plugin is the
default[^4] used in docker for generating sbom attestations, but we're
making that default explicit by referencing the container image.
[^1]: https://github.com/rust-secure-code/cargo-auditable
[^2]: https://github.com/anchore/syft
[^3]: https://github.com/docker/buildkit-syft-scanner
[^4]:
https://docs.docker.com/build/metadata/attestations/sbom/#sbom-generator
[^5]: https://github.com/luser/rustfilt/issues/23
## Problem
We have seen some errors in staging when the shard migration was
triggered by optimizations, and it was ongoing during draining the node
it was migrating from. It happens because the node draining loop only
waits for the migrations started by the drain loop itself. The ongoing
migrations are ignored.
Closes: https://databricks.atlassian.net/browse/LKB-1625
## Summary of changes
- Wait for the shard reconciliation during the drain if it is being
migrated from the drained node.
## Problem
We used ClickHouse v. 24.8, which is outdated, for logical replication
testing. We could miss some problems.
## Summary of changes
The version was updated to 25.6, with a workaround using the environment
variable `PGSSLCERT`.
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
`test_lsn_lease_storcon` might fail in debug builds due to slow
ShardSplit
## Summary of changes
- Make `test_lsn_lease_storcon ` test to ignore `.*Exclusive lock by
ShardSplit was held.*` warning in debug builds
Ref: https://databricks.slack.com/archives/C09254R641L/p1753777051481029
The `std::mem::offset_of` macro was introduced in Rust 1.77.0.
In the passing, mark the function as `const`, as suggested in the
comment. Not sure which compiler version that requires, but it works
with what have currently.
## Problem
Password hashing for sql-over-http takes up a lot of CPU. Perhaps we can
get away with temporarily caching some steps so we only need fewer
rounds, which will save some CPU time.
## Summary of changes
The output of pbkdf2 is the XOR of the outputs of each iteration round,
eg `U1 ^ U2 ^ ... U15 ^ U16 ^ U17 ^ ... ^ Un`. We cache the suffix of
the expression `U16 ^ U17 ^ ... ^ Un`. To compute the result from the
cached suffix, we only need to compute the prefix `U1 ^ U2 ^ ... U15`.
The suffix by itself is useless, which prevent's its use in brute-force
attacks should this cached memory leak.
We are also caching the full 4096 round hash in memory, which can be
used for brute-force attacks, where this suffix could be used to speed
it up. My hope/expectation is that since these will be in different
allocations, it makes any such memory exploitation much much harder.
Since the full hash cache might be invalidated while the suffix is
cached, I'm storing the timestamp of the computation as a way to
identity the match.
I also added `zeroize()` to clear the sensitive state from the
stack/heap.
For the most security conscious customers, we hope to roll out OIDC
soon, so they can disable passwords entirely.
---
The numbers for the threadpool were pretty random, but according to our
busiest region for sql-over-http, we only see about 150 unique endpoints
every minute. So storing ~100 of the most common endpoints for that
minute should be the vast majority of requests.
1 minute was chosen so we don't keep data in memory for too long.
- Remove some unused code
- Use `is_multiple_of()` instead of '%'
- Collapse consecuative "if let" statements
- Elided lifetime fixes
It is enough just to review the code of your team
## Problem
close LKB-753. `test_pageserver_metrics_removed_after_offload` is
unstable and it sometimes leave the metrics behind after tenant
offloading. It turns out that we triggered an image compaction before
the offload and the job was stopped after the offload request was
completed.
## Summary of changes
Wait all background tasks to finish before checking the metrics.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
There were a few uses of these already, so collect them to the
compatibility header to avoid the repetition and scattered #ifdefs.
The definition of MyProcNumber is a little different from what was used
before, but the end result is the same. (PGPROC->pgprocno values were
just assigned sequentially to all PGPROC array members, see
InitProcGlobal(). That's a bit silly, which is why it was removed in
v17.)
## Problem
When tenants have a lot of timelines, the number of tenants that a
pageserver can comfortably handle goes down. Branching is much more
widely used in practice now than it was when this code was written, and
we generally run pageservers with a few thousand tenants (where each
tenant has many timelines), rather than the 10k-20k we might have done
historically.
This should really be something configurable, or a more direct proxy for
resource utilization (such as non-archived timeline count), but this
change should be a low effort improvement.
## Summary of changes
* Change the target shard count (MAX_SHARDS) to 2500 from 5000 when
calculating pageserver utilization (i.e. a 200% overcommit now
corresponds to 5000 shards, not 10000 shards)
Co-authored-by: John Spray <john.spray@databricks.com>
## Problem
The test for logical replication used the year-old versions of
ClickHouse and Debezium so that we may miss problems related to
up-to-date versions.
## Summary of changes
The ClickHouse version has been updated to 24.8.
The Debezium version has been updated to the latest stable one,
3.1.3Final.
Some problems with locally running the Debezium test have been fixed.
---------
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Exposes metrics for caches. LKB-2594
This exposes a high level namespace, `cache`, that all cache metrics can
be added to - this makes it easier to make library panels for the caches
as I understand it.
To calculate the current cache fill ratio, you could use the following
query:
```
(
cache_inserted_total{cache="node_info"}
- sum (cache_evicted_total{cache="node_info"}) without (cause)
)
/ cache_capacity{cache="node_info"}
```
To calculate the cache hit ratio, you could use the following query:
```
cache_request_total{cache="node_info", outcome="hit"}
/ sum (cache_request_total{cache="node_info"}) without (outcome)
```
## Problem
For certificate auth, we need to configure pg_hba and pg_ident for it to
work.
HCC needs to mount this config map to all pg compute pod.
## Summary of changes
Create `databricks_pg_hba` and `databricks_pg_ident` to configure where
the files are located on the pod. These configs are pass down to
`compute_ctl`. Compute_ctl uses these config to update `pg_hba.conf` and
`pg_ident.conf` file.
We append `include_if_exists {databricks_pg_hba}` to `pg_hba.conf` and
similarly to `pg_ident.conf`. So that it will refer to databricks config
file without much change to existing pg default config file.
---------
Co-authored-by: Jarupat Jisarojito <jarupat.jisarojito@databricks.com>
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: HaoyuHuang <haoyu.huang.68@gmail.com>
Before this PR, getpage requests wouldn't hold the
`applied_gc_cutoff_lsn` guard until they were done.
Theoretical impact: if we’re not holding the `RcuReadGuard`, gc can
theoretically concurrently delete reconstruct data that we need to
reconstruct the page.
I don't think this practically occurs in production because the odds of
it happening are quite low, especially for primary read_write computes.
But RO replicas / standby_horizon relies on correct
`applied_gc_cutofff_lsn`, so, I'm fixing this as part of the work ok
replacing standby_horizon propagation mechanism with leases (LKB-88).
The change is feature-gated with a feature flag, and evaluated once when
entering `handle_pagestream` to avoid performance impact.
For observability, we add a field to the `handle_pagestream` span, and a
slow-log to the place in `gc_loop` where it waits for the in-flight
RcuReadGuard's to drain.
refs
- fixes https://databricks.atlassian.net/browse/LKB-2572
- standby_horizon leases epic:
https://databricks.atlassian.net/browse/LKB-2572
---------
Co-authored-by: Christian Schwarz <Christian Schwarz>
## Problem
Monitoring dashboards show aggregates of all proxy instances, including
terminating ones. This can skew the results or make graphs less
readable. Also, alerts must be tuned to ignore certain signals from
terminating proxies.
## Summary of changes
Add a `service_info` metric currently with one label, `state`, showing
if an instance is in state `init`, `running`, or `terminating`. The
metric can be joined with other metrics to filter the presented time
series.
## Problem
test_ps_unavailable_after_delete is flaky. All test failures I've looked
at are because of ERROR log messages in pageserver, which happen because
storage controller tries runs a reconciliations during the graceful
shutdown of the pageserver.
I wasn't able to reproduce it locally, but I think stopping PS
immediately instead of gracefully should help. If not, we might just
silence those errors.
- Closes: https://databricks.atlassian.net/browse/LKB-745
## Problem
We need the set the following Postgres GUCs to the correct value before
starting Postgres in the compute instance:
```
databricks.workspace_url
databricks.enable_databricks_identity_login
databricks.enable_sql_restrictions
```
## Summary of changes
Plumbed through `workspace_url` and other GUC settings via
`DatabricksSettings` in `ComputeSpec`. The spec is sent to the compute
instance when it starts up and the GUCs are written to `postgresql.conf`
before the postgres process is launched.
---------
Co-authored-by: Jarupat Jisarojito <jarupat.jisarojito@databricks.com>
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
Copy certificate and key from secret mount directory to `pgdata`
directory where `postgres` is the owner and we can set the key
permission to 0600.
## Summary of changes
- Added new pgparam `pg_compute_tls_settings` to specify where k8s
secret for certificate and key are mounted.
- Added a new field to `ComputeSpec` called `databricks_settings`. This
is a struct that will be used to store any other settings that needs to
be propagate to Compute but should not be persisted to `ComputeSpec` in
the database.
- Then when the compute container start up, as part of `prepare_pgdata`
function, it will copied `server.key` and `server.crt` from k8s mounted
directory to `pgdata` directory.
## How is this tested?
Add unit tests.
Manual test via KIND
Co-authored-by: Jarupat Jisarojito <jarupat.jisarojito@databricks.com>
## Problem
We saw the following in the field:
Context and observations:
* The storage controller keeps track of the latest generations and the
pageserver that issued the latest generation in the database
* When the storage controller needs to proxy a request (e.g. timeline
creation) to the pageservers, it will find use the pageserver that
issued the latest generation from the db (generation_pageserver).
* pageserver-2.cell-2 got into a bad state and wasn't able to apply
location_config (e.g. detach a shard)
What happened:
1. pageserver-2.cell-2 was a secondary for our shard since we were not
able to detach it
2. control plane asked to detach a tenant (presumably because it was
idle)
a. In response storcon clears the generation_pageserver from the db and
attempts to detach all locations
b. it tries to detach pageserver-2.cell-2 first, but fails, which fails
the entire reconciliation leaving the good attached location still there
c. return success to cplane
3. control plane asks to re-attach the tenant
a. In response storcon performs a reconciliation
b. it finds that the observed state matches the intent (remember we did
not detach the primary at step(2))
c. skips incrementing the genration and setting the
generation_pageserver column
Now any requests that need to be proxied to pageservers and rely on the
generation_pageserver db column fail because that's not set
## Summary of changes
1. We do all non-essential location config calls (setting up
secondaries,
detaches) at the end of the reconciliation. Previously, we bailed out
of the reconciliation on the first failure. With this patch we attempt
all of the RPCs.
This allows the observed state to update even if another RPC failed for
unrelated reasons.
2. If the overall reconciliation failed, we don't want to remove nodes
from the
observed state as a safe-guard. With the previous patch, we'll get a
deletion delta to process, which would be ignored. Ignoring it is not
the right thing to do since it's out of sync with the db state.
Hence, on reconciliation failures map deletion from the observed state
to the uncertain state. Future reconciliation will query the node to
refresh their observed state.
Closes LKB-204
Verify that gRPC `GetPageRequest` has been sent to the shard that owns
the pages. This avoid spurious `NotFound` errors if a compute misroutes
a request, which can appear scarier (e.g. data loss).
Touches [LKB-191](https://databricks.atlassian.net/browse/LKB-191).
## Problem
The Dockerfile for build tools has some small issues that are easy to
fix to make it follow some of docker best practices
## Summary of changes
Apply some small quick wins on the Dockerfile for build tools
- Usage of apt-get over apt
- usage of --no-cache-dir for pip install
## Problem
LKB-2502 The garbage collection of the project info cache is garbage.
What we observed: If we get unlucky, we might throw away a very hot
entry if the cache is full. The GC loop is dependent on getting a lucky
shard of the projects2ep table that clears a lot of cold entries. The GC
does not take into account active use, and the interval it runs at is
too sparse to do any good.
Can we switch to a proper cache implementation?
Complications:
1. We need to invalidate by project/account.
2. We need to expire based on `retry_delay_ms`.
## Summary of changes
1. Replace `retry_delay_ms: Duration` with `retry_at: Instant` when
deserializing.
2. Split the EndpointControls from the RoleControls into two different
caches.
3. Introduce an expiry policy based on error retry info.
4. Introduce `moka` as a dependency, replacing our `TimedLru`.
See the follow up PR for changing all TimedLru instances to use moka:
#12726.
Follow up to #12701, which introduced a new regression. When profiling
locally I noticed that writes have the tendency to always reallocate. On
investigation I found that even if the `Connection`'s write buffer is
empty, if it still shares the same data pointer as the `Client`'s write
buffer then the client cannot reclaim it.
The best way I found to fix this is to just drop the `Connection`'s
write buffer each time we fully flush it.
Additionally, I remembered that `BytesMut` has an `unsplit` method which
is allows even better sharing over the previous optimisation I had when
'encoding'.
## Problem
While configuring or reconfiguring PG due to PageServer movements, it's
possible PG may get stuck if PageServer is moved around after fetching
the spec from StorageController.
## Summary of changes
To fix this issue, this PR introduces two changes:
1. Fail the PG query directly if the query cannot request configuration
for certain number of times.
2. Introduce a new state `RefreshConfiguration` in compute tools to
differentiate it from `RefreshConfigurationPending`. If compute tool is
already in `RefreshConfiguration` state, then it will not accept new
request configuration requests.
## How is this tested?
Chaos testing.
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
In our experience running the system so far, almost all of the "hang
compute" situations are due to the compute (postgres) pointing at the
wrong pageservers. We currently mainly rely on the promethesus exporter
(PGExporter) running on PG to detect and report any down time, but these
can be unreliable because the read and write probes the PGExporter runs
do not always generate pageserver requests due to caching, even though
the real user might be experiencing down time when touching uncached
pages.
We are also about to start disk-wiping node pool rotation operations in
prod clusters for our pageservers, and it is critical to have a
convenient way to monitor the impact of these node pool rotations so
that we can quickly respond to any issues. These metrics should provide
very clear signals to address this operational need.
## Summary of changes
Added a pair of metrics to detect issues between postgres' PageStream
protocol (e.g. get_page_at_lsn, get_base_backup, etc.) communications
with pageservers:
* On the compute node (compute_ctl), exports a counter metric that is
incremented every time postgres requests a configuration refresh.
Postgres today only requests these configuration refreshes when it
cannot connect to a pageserver or if the pageserver rejects its request
by disconnecting.
* On the pageserver, exports a counter metric that is incremented every
time it receives a PageStream request that cannot be handled because the
tenant is not known or if the request was routed to the wrong shard
(e.g. secondary).
### How I plan to use metrics
I plan to use the metrics added here to create alerts. The alerts can
fire, for example, if these counters have been continuously increasing
for over a certain period of time. During rollouts, misrouted requests
may occasionally happen, but they should soon die down as
reconfigurations make progress. We can start with something like raising
the alert if the counters have been increasing continuously for over 5
minutes.
## How is this tested?
New integration tests in
`test_runner/regress/test_hadron_ps_connectivity_metrics.py`
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
Currently PG backpressure parameters are enforced globally. With tenant
splitting, this makes it hard to balance small tenants and large
tenants. For large tenants with more shards, we need to increase the
lagging because each shard receives total/shard_count amount of data,
while doing so could be suboptimal to small tenants with fewer shards.
## Summary of changes
This PR makes these parameters to be enforced at the shard level, i.e.,
PG will compute the actual lag limit by multiply the shard count.
## How is this tested?
Added regression test.
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
This is a follow-up to TODO, as part
of the effort to rewire the compute reconfiguration/notification
mechanism to make it more robust. Please refer to that commit or ticket
BRC-1778 for full context of the problem.
## Summary of changes
The previous change added mechanism in `compute_ctl` that makes it
possible to refresh the configuration of PG on-demand by having
`compute_ctl` go out to download a new config from the control
plane/HCC. This change wired this mechanism up with PG so that PG will
signal `compute_ctl` to refresh its configuration when it suspects that
it could be talking to incorrect pageservers due to a stale
configuration.
PG will become suspicious that it is talking to the wrong pageservers in
the following situations:
1. It cannot connect to a pageserver (e.g., getting a network-level
connection refused error)
2. It can connect to a pageserver, but the pageserver does not return
any data for the GetPage request
3. It can connect to a pageserver, but the pageserver returns a
malformed response
4. It can connect to a pageserver, but there is an error receiving the
GetPage request response for any other reason
This change also includes a minor tweak to `compute_ctl`'s config
refresh behavior. Upon receiving a request to refresh PG configuration,
`compute_ctl` will reach out to download a config, but it will not
attempt to apply the configuration if the config is the same as the old
config is it replacing. This optimization is added because the act of
reconfiguring itself requires working pageserver connections. In many
failure situations it is likely that PG detects an issue with a
pageserver before the control plane can detect the issue, migrate
tenants, and update the compute config. In this case even the latest
compute config won't point PG to working pageservers, causing the
configuration attempt to hang and negatively impact PG's
time-to-recovery. With this change, `compute_ctl` only attempts
reconfiguration if the refreshed config points PG to different
pageservers.
## How is this tested?
The new code paths are exercised in all existing tests because this
mechanism is on by default.
Explicitly tested in `test_runner/regress/test_change_pageserver.py`.
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
We don't have a well-documented, periodic benchmark for TPC-C like OLTP
workload.
## Summary of changes
# Benchbase TPC-C-like Performance Results
Runs TPC-C-like benchmarks on Neon databases using
[Benchbase](https://github.com/cmu-db/benchbase).
Docker images are built
[here](https://github.com/neondatabase-labs/benchbase-docker-images)
We run the benchmarks at different scale factors aligned with different
compute sizes we offer to customers.
For each scale factor, we determine a max rate (see Throughput in warmup
phase) and then run the benchmark at a target rate of approx. 70 % of
the max rate.
We use different warehouse sizes which determine the working set size -
it is optimized for LFC size of the respected pricing tier.
Usually we should get LFC hit rates above 70 % for this setup and quite
good, consistent (non-flaky) latencies.
## Expected performance as of first testing this
| Tier | CU | Warehouses | Terminals | Max TPS | LFC size | Working set
size | LFC hit rate | Median latency | p95 latency |
|------------|------------|---------------|-----------|---------|----------|------------------|--------------|----------------|-------------|
| free | 0.25-2 | 50 - 5 GB | 150 | 800 | 5 GB | 6.3 GB | 95 % | 170 ms
| 600 ms |
| serverless | 2-8 | 500 - 50 GB | 230 | 2000 | 26 GB | ?? GB | 91 % |
50 ms | 200 ms |
| business | 2-16 | 1000 - 100 GB | 330 | 2900 | 51 GB | 50 GB | 72 % |
40 ms | 180 ms |
Each run
- first loads the database (not shown in the dashboard).
- Then we run a warmup phase for 20 minutes to warm up the database and
the LFC at unlimited target rate (max rate) (highest throughput but
flaky latencies).
The warmup phase can be used to determine the max rate and adjust it in
the github workflow in case Neon is faster in the future.
- Then we run the benchmark at a target rate of approx. 70 % of the max
rate for 1 hour (expecting consistent latencies and throughput).
## Important notes on implementation:
- we want to eventually publish the process how to reproduce these
benchmarks
- thus we want to reduce all dependencies necessary to run the
benchmark, the only thing needed are
- docker
- the docker images referenced above for benchbase
- python >= 3.9 to run some config generation steps and create diagrams
- to reduce dependencies we deliberatly do NOT use some of our python
fixture test infrastructure to make the dependency chain really small -
so pls don't add a review comment "should reuse fixture xy"
- we also upload all generator python scripts, generated bash shell
scripts and configs as well as raw results to S3 bucket that we later
want to publish once this benchmark is reviewed and approved.
## Problem
* Fixes LKB-743
We get regular assertion failures on staging caused by a race with chaos
injector. If chaos injector decides to migrate a tenant shard between
the background optimisation planning and applying optimisations then we
attempt to migrate and already migrated shard and hit an assertion
failure.
## Summary of changes
@VladLazar fixed a variant of this issue by
adding`validate_optimization` recently, however it didn't validate the
specific property this other assertion requires. Fix is just to update
it to cover all the expected properties.
## Problem
Compiling `neon-pg-ext-v17` results in these linker warnings for
`libcommunicator.a`:
```
$ make -j`nproc` -s neon-pg-ext-v17
Installing PostgreSQL v17 headers
Compiling PostgreSQL v17
Compiling neon-specific Postgres extensions for v17
ld: warning: object file (/Users/erik.grinaker/Projects/neon/target/debug/libcommunicator.a[1159](25ac62e5b3c53843-curve25519.o)) was built for newer 'macOS' version (15.5) than being linked (15.0)
ld: warning: object file (/Users/erik.grinaker/Projects/neon/target/debug/libcommunicator.a[1160](0bbbd18bda93c05b-aes_nohw.o)) was built for newer 'macOS' version (15.5) than being linked (15.0)
ld: warning: object file (/Users/erik.grinaker/Projects/neon/target/debug/libcommunicator.a[1161](00c879ee3285a50d-montgomery.o)) was built for newer 'macOS' version (15.5) than being linked (15.0)
[...]
```
## Summary of changes
Set `MACOSX_DEPLOYMENT_TARGET` to the current local SDK version (15.5 in
this case), which links against object files for that version.
## Problem
Compute retries are finite (e.g. 5x in a basebackup) -- with a 50%
failure rate we have pretty good chance of exceeding that and the test
failing.
Fixes: https://databricks.atlassian.net/browse/LKB-2278
## Summary of changes
- Turn connection error rate down to 20%
Co-authored-by: John Spray <john.spray@databricks.com>
## Problem
We have been dealing with a number of issues with the SC compute
notification mechanism. Various race conditions exist in the
PG/HCC/cplane/PS distributed system, and relying on the SC to send
notifications to the compute node to notify it of PS changes is not
robust. We decided to pursue a more robust option where the compute node
itself discovers whether it may be pointing to the incorrect PSs and
proactively reconfigure itself if issues are suspected.
## Summary of changes
To support this self-healing reconfiguration mechanism several pieces
are needed. This PR adds a mechanism to `compute_ctl` called "refresh
configuration", where the compute node reaches out to the control plane
to pull a new config and reconfigure PG using the new config, instead of
listening for a notification message containing a config to arrive from
the control plane. Main changes to compute_ctl:
1. The `compute_ctl` state machine now has a new State,
`RefreshConfigurationPending`. The compute node may enter this state
upon receiving a signal that it may be using the incorrect page servers.
2. Upon entering the `RefreshConfigurationPending` state, the background
configurator thread in `compute_ctl` wakes up, pulls a new config from
the control plane, and reconfigures PG (with `pg_ctl reload`) according
to the new config.
3. The compute node may enter the new `RefreshConfigurationPending`
state from `Running` or `Failed` states. If the configurator managed to
configure the compute node successfully, it will enter the `Running`
state, otherwise, it stays in `RefreshConfigurationPending` and the
configurator thread will wait for the next notification if an incorrect
config is still suspected.
4. Added various plumbing in `compute_ctl` data structures to allow the
configurator thread to perform the config fetch.
The "incorrect config suspected" notification is delivered using a HTTP
endpoint, `/refresh_configuration`, on `compute_ctl`. This endpoint is
currently not called by anyone other than the tests. In a follow up PR I
will set up some code in the PG extension/libpagestore to call this HTTP
endpoint whenever PG suspects that it is pointing to the wrong page
servers.
## How is this tested?
Modified `test_runner/regress/test_change_pageserver.py` to add a
scenario where we use the new `/refresh_configuration` mechanism instead
of the existing `/configure` mechanism (which requires us sending a full
config to compute_ctl) to have the compute node reload and reconfigure
its pageservers.
I took one shortcut to reduce the scope of this change when it comes to
testing: the compute node uses a local config file instead of pulling a
config over the network from the HCC. This simplifies the test setup in
the following ways:
* The existing test framework is set up to use local config files for
compute nodes only, so it's convenient if I just stick with it.
* The HCC today generates a compute config with production settings
(e.g., assuming 4 CPUs, 16GB RAM, with local file caches), which is
probably not suitable in tests. We may need to add another test-only
endpoint config to the control plane to make this work.
The config-fetch part of the code is relatively straightforward (and
well-covered in both production and the KIND test) so it is probably
fine to replace it with loading from the local config file for these
integration tests.
In addition to making sure that the tests pass, I also manually
inspected the logs to make sure that the compute node is indeed
reloading the config using the new mechanism instead of going down the
old `/configure` path (it turns out the test has bugs which causes
compute `/configure` messages to be sent despite the test intending to
disable/blackhole them).
```test
2024-09-24T18:53:29.573650Z INFO http request{otel.name=/refresh_configuration http.method=POST}: serving /refresh_configuration POST request
2024-09-24T18:53:29.573689Z INFO configurator_main_loop: compute node suspects its configuration is out of date, now refreshing configuration
2024-09-24T18:53:29.573706Z INFO configurator_main_loop: reloading config.json from path: /workspaces/hadron/test_output/test_change_pageserver_using_refresh[release-pg16]/repo/endpoints/ep-1/spec.json
PG:2024-09-24 18:53:29.574 GMT [52799] LOG: received SIGHUP, reloading configuration files
PG:2024-09-24 18:53:29.575 GMT [52799] LOG: parameter "neon.extension_server_port" cannot be changed without restarting the server
PG:2024-09-24 18:53:29.575 GMT [52799] LOG: parameter "neon.pageserver_connstring" changed to "postgresql://no_user@localhost:15008"
...
```
Co-authored-by: William Huang <william.huang@databricks.com>
PR #12431 set initial lease deadline = 0s for tests.
This turned test_hot_standby_gc flaky because it now runs GC: it started
failing with `tried to request a page version that was garbage
collected`
because the replica reads below applied gc cutoff.
The leading theory is that, we run the timeline_gc() before the first
standby_horizon push arrives at PS. That is definitively a thing that
can happen with the current standby_horizon mechanism, and it's now
tracked as such in https://databricks.atlassian.net/browse/LKB-2499.
We don't have logs to confirm this theory though, but regardless,
try the fix in this PR and see if it stabilizes things.
Refs
- flaky test issue: https://databricks.atlassian.net/browse/LKB-2465
## Problem
## Summary of changes
Another go at #12341. LKB-2497
We now only need 1 connect mechanism (and 1 more for testing) which
saves us some code and complexity. We should be able to remove the final
connect mechanism when we create a separate worker task for
pglb->compute connections - either via QUIC streams or via in-memory
channels.
This also now ensures that connect_once always returns a ConnectionError
type - something simple enough we can probably define a serialisation
for in pglb.
* I've abstracted connect_to_compute to always use TcpMechanism and the
ProxyConfig.
* I've abstracted connect_to_compute_and_auth to perform authentication,
managing any retries for stale computes
* I had to introduce a separate `managed` function for taking ownership
of the compute connection into the Client/Connection pair
## Problem
`postgres_exporter` has database collector enabled by default and it
doesn't filter out invalid databases, see
06a553c816/collector/pg_database.go (L67)
so if it hits one, it starts spamming logs
```
ERROR: [NEON_SMGR] [reqid d9700000018] could not read db size of db 705302 from page server at lsn 5/A2457EB0
```
## Summary of changes
We don't use `pg_database_size_bytes` metric anyway, see
5e19b3fd89/apps/base/compute-metrics/scrape-compute-pg-exporter-neon.yaml (L29)
so just turn it off by passing `--no-collector.database`.
## Problem
A large insert or a large row will cause the codec to allocate a large
buffer. The codec never shrinks the buffer however. LKB-2496
## Summary of changes
1. Introduce a naive GC system for codec buffers
2. Try and reduce copies as much as possible
## Problem
Tenant split test revealed another bug with PG backpressure throttling
that under some cases PS may never report its progress back to SK (e.g.,
observed when aborting tenant shard where the old shard needs to
re-establish SK connection and re-ingest WALs from a much older LSN). In
this case, PG may get stuck forever.
## Summary of changes
As a general precaution that PS feedback mechanism may not always be
reliable, this PR uses the previously introduced WAL write rate limit
mechanism to slow down write rates instead of completely pausing it. The
idea is to introduce a new
`databricks_effective_max_wal_bytes_per_second`, which is set to
`databricks_max_wal_mb_per_second` when no PS back pressure and is set
to `10KB` when there is back pressure. This way, PG can still write to
SK, though at a very low speed.
The PR also fixes the problem that the current WAL rate limiting
mechanism is too coarse grained and cannot enforce limits < 1MB. This is
because it always resets the rate limiter after 1 second, even if PG
could have written more data in the past second. The fix is to introduce
a `batch_end_time_us` which records the expected end time of the current
batch. For example, if PG writes 10MB of data in a single batch, and max
WAL write rate is set as `1MB/s`, then `batch_end_time_us` will be set
as 10 seconds later.
## How is this tested?
Tweaked the existing test, and also did manual testing on dev. I set
`max_replication_flush_lag` as 1GB, and loaded 500GB pgbench tables.
It's expected to see PG gets throttled periodically because PS will
accumulate 4GB of data before flushing.
Results:
when PG is throttled:
```
9500000 of 3300000000 tuples (0%) done (elapsed 10.36 s, remaining 3587.62 s)
9600000 of 3300000000 tuples (0%) done (elapsed 124.07 s, remaining 42523.59 s)
9700000 of 3300000000 tuples (0%) done (elapsed 255.79 s, remaining 86763.97 s)
9800000 of 3300000000 tuples (0%) done (elapsed 315.89 s, remaining 106056.52 s)
9900000 of 3300000000 tuples (0%) done (elapsed 412.75 s, remaining 137170.58 s)
```
when PS just flushed:
```
18100000 of 3300000000 tuples (0%) done (elapsed 433.80 s, remaining 78655.96 s)
18200000 of 3300000000 tuples (0%) done (elapsed 433.85 s, remaining 78231.71 s)
18300000 of 3300000000 tuples (0%) done (elapsed 433.90 s, remaining 77810.62 s)
18400000 of 3300000000 tuples (0%) done (elapsed 433.96 s, remaining 77395.86 s)
18500000 of 3300000000 tuples (0%) done (elapsed 434.03 s, remaining 76987.27 s)
18600000 of 3300000000 tuples (0%) done (elapsed 434.08 s, remaining 76579.59 s)
18700000 of 3300000000 tuples (0%) done (elapsed 434.13 s, remaining 76177.12 s)
18800000 of 3300000000 tuples (0%) done (elapsed 434.19 s, remaining 75779.45 s)
18900000 of 3300000000 tuples (0%) done (elapsed 434.84 s, remaining 75489.40 s)
19000000 of 3300000000 tuples (0%) done (elapsed 434.89 s, remaining 75097.90 s)
19100000 of 3300000000 tuples (0%) done (elapsed 434.94 s, remaining 74712.56 s)
19200000 of 3300000000 tuples (0%) done (elapsed 498.93 s, remaining 85254.20 s)
19300000 of 3300000000 tuples (0%) done (elapsed 498.97 s, remaining 84817.95 s)
19400000 of 3300000000 tuples (0%) done (elapsed 623.80 s, remaining 105486.76 s)
19500000 of 3300000000 tuples (0%) done (elapsed 745.86 s, remaining 125476.51 s)
```
Co-authored-by: Chen Luo <chen.luo@databricks.com>
This GUC will become useful for temporarily disabling Lakebase-specific
features during the code merge.
Signed-off-by: Tristan Partin <tristan.partin@databricks.com>
https://github.com/neondatabase/cloud/issues/19011
- Accept `ComputeSpec` in `/promote` instead of just passing safekeepers
and LSN. Update API spec
- Add corner case tests for promotion when promotion or perwarm fails
(using failpoints)
- Print root error for prewarm and promotion in status handlers
## Problem
There has been some inconsistencies of providing tenant config via
`tenant_create` and via other tenant config APIs due to how the
properties are processed: in `tenant_create`, the test framework calls
neon-cli and therefore puts those properties in the cmdline. In other
cases, it's done via the HTTP API by directly serializing to a JSON.
When using the cmdline, the program only accepts serde bool that is
true/false.
## Summary of changes
Convert Python bool into `true`/`false` when using neon-cli.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
OTel 0.28+ by default uses blocking operations in a dedicated thread and
doesn't start a tokio runtime. Reqwest as currently configured wants to
spawn tokio tasks.
## Summary of changes
Use blocking reqwest.
This PR just mitigates the current issue.
Session variables can be set during one sql-over-http query and observed
on another when that pooled connection is re-used. To address this we
can use `RESET ALL;` before re-using the connection. LKB-2495
To be on the safe side, we can opt for a full `DISCARD ALL;`, but that
might have performance regressions since it also clears any query plans.
See pgbouncer docs
https://www.pgbouncer.org/config.html#server_reset_query.
`DISCARD ALL` is currently defined as:
```
CLOSE ALL;
SET SESSION AUTHORIZATION DEFAULT;
RESET ALL;
DEALLOCATE ALL;
UNLISTEN *;
SELECT pg_advisory_unlock_all();
DISCARD PLANS;
DISCARD TEMP;
DISCARD SEQUENCES;
```
I've opted to keep everything here except the `DISCARD PLANS`. I've
modified the code so that this query is executed in the background when
a connection is returned to the pool, rather than when taken from the
pool.
This should marginally improve performance for Neon RLS by removing 1
(localhost) round trip. I don't believe that keeping query plans could
be a security concern. It's a potential side channel, but I can't
imagine what you could extract from it.
---
Thanks to
https://github.com/neondatabase/neon/pull/12659#discussion_r2219016205
for probing the idea in my head.
## Problem
LKB-197, #9516
To make sure the migration path is smooth.
The previous plan is to store new relations in new keyspace and old ones
in old keyspace until it gets dropped. This makes the migration path
hard as we can't validate v2 writes and can't rollback. This patch gives
us a more smooth migration path:
- The first time we enable reldirv2 for a tenant, we copy over
everything in the old keyspace to the new one. This might create a short
spike of latency for the create relation operation, but it's oneoff.
- After that, we have identical v1/v2 keyspace and read/write both of
them. We validate reads every time we list the reldirs.
- If we are in `migrating` mode, use v1 as source of truth and log a
warning for failed v2 operations. If we are in `migrated` mode, use v2
as source of truth and error when writes fail.
- One compatibility test uses dataset from the time where we enabled
reldirv2 (of the original rollout plan), which only has relations
written to the v2 keyspace instead of the v1 keyspace. We had to adjust
it accordingly.
- Add `migrated_at` in index_part to indicate the LSN where we did the
initialize.
TODOs:
- Test if relv1 can be read below the migrated_at LSN.
- Move the initialization process to L0 compaction instead of doing it
on the write path.
- Disable relcache in the relv2 test case so that all code path gets
fully tested.
## Summary of changes
- New behavior of reldirv2 migration flags as described above.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
> bullseye-backports has reached end-of-life and is no longer supported
or updated
From: https://backports.debian.org/Instructions/
This causes the compute-node image build to fail with the following
error:
```
0.099 Err:5 http://deb.debian.org/debian bullseye-backports Release
0.099 404 Not Found [IP: 146.75.122.132 80]
...
1.293 E: The repository 'http://deb.debian.org/debian bullseye-backports Release' does not have a Release file.
```
## Summary of changes
- Use archive version of `bullseye-backports`
Second attempt at #12130, now with a smaller diff.
This allows us to skip allocating for things like parameter status and
notices that we will either just forward untouched, or discard.
LKB-2494
## Problem
With safekeeper migration in mind, we can now pull/exclude the timeline
multiple times within the same safekeeper. To avoid races between out of
order requests, we need to ignore the pull/exclude requests if we have
already seen a higher generation.
- Closes: https://github.com/neondatabase/neon/issues/12186
- Closes: [LKB-949](https://databricks.atlassian.net/browse/LKB-949)
## Summary of changes
- Annotate timeline tombstones in safekeeper with request generation.
- Replace `ignore_tombstone` option with `mconf` in
`PullTimelineRequest`
- Switch membership in `pull_timeline` if the existing/pulled timeline
has an older generation.
- Refuse to switch membership if the timeline is being deleted
(`is_canceled`).
- Refuse to switch membership in compute greeting request if the
safekeeper is not a member of `mconf`.
- Pass `mconf` in `PullTimelineRequest` in safekeeper_service
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
When testing tenant splits, I found that PG can get backpressure
throttled indefinitely if the split is aborted afterwards. It turns out
that each PageServer activates new shard separately even before the
split is committed and they may start sending PageserverFeedback to PG
directly. As a result, if the split is aborted, no one resets the
pageserver feedback in PG, and thus PG will be backpressure throttled
forever unless it's restarted manually.
## Summary of changes
This PR fixes this problem by having
`walprop_pg_process_safekeeper_feedback` simply ignore all pageserver
feedback from unknown shards. The source of truth here is defined by the
shard map, which is guaranteed to be reloaded only after the split is
committed.
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
As part of the reldirv2 rollout: LKB-197.
We will use number of db/rels as a criteria whether to rollout reldirv2
directly on the write path (simplest and easiest way of rollout). If the
number of rel/db is small then it shouldn't take too long time on the
write path.
## Summary of changes
* Compute db/rel count during basebackup.
* Also compute it during logical size computation.
* Collect maximum number of db/rel across all timelines in the feature
flag propeties.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We did not test some Public API calls, such as using a timestamp to
create a branch, reset_to_parent.
## Summary of changes
Tests now include some other operations: reset_to_parent, a branch
creation from any time in the past, etc.
Currently, the API calls are only exposed; the semantics are not
verified.
---------
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
We drive the get page requests that have started processing to
completion. So in the case when the compute received a reconfiguration
request and the old connection has a request procesing on the
pageserver, we are going to issue the warning.
I spot checked a few instances of the warning and in all cases the
compute was already connected to the correct pageserver.
## Summary of Changes
Downgrade to INFO. It would be nice to somehow figure out if the
connection has been terminated in the meantime, but the terminate libpq
message is still in the pipe while we're doing the shard resolution.
Closes LKB-2381
The argument to BufTagInit was called 'spcOid', and it was also setting
a field called 'spcOid'. The field name would erroneously also be
expanded with the macro arg. It happened to work so far, because all the
users of the macro pass a variable called 'spcOid' for the 'spcOid'
argument, but as soon as you try to pass anything else, it fails. And
same story for 'dbOid' and 'relNumber'. Rename the arguments to avoid
the name collision.
Also while we're at it, add parens around the arguments in a few macros,
to make them safer if you pass something non-trivial as the argument.
## Problem
We don't detect if safekeeper migration fails after the the commiting
the membership configuration to the database. As a result, we might
leave stale timelines on excluded safekeepers and do not notify
cplane/safekepeers about new configuration.
- Implements solution proposed in
https://github.com/neondatabase/neon/pull/12432
- Closes: https://github.com/neondatabase/neon/issues/12192
- Closes: [LKB-944](https://databricks.atlassian.net/browse/LKB-944)
## Summary of changes
- Add `sk_set_notified_generation` column to `timelines` database
- Update `*_notified_generation` in database during the finish state.
- Commit reconciliation requests to database atomically with membership
configuration.
- Reload pending ops and retry "finish" step if we detect
`*_notified_generation` mismatch.
- Add failpoints and test that we handle failures well
## Problem
Post LKB-198 rollout. We added a new strategy to generate image layers
at the L0-L1 boundary instead of the latest LSN to ensure too many L0
layers do not trigger image layer creation.
## Summary of changes
We already rolled it out to all users so we can remove the feature flag
now.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Currently, the exporter exposes the same LFC metrics that are exposed by
the "autoscaling" sql_exporter in the docker image. With this, we can
remove the dedicated sql_exporter instance. (Actually doing the removal
is left as a TODO until this is rolled out to production and we have
changed autoscaling-agent to fetch the metrics from this new endpoint.)
The exporter runs as a Postgres background worker process. This is
extracted from the Rust communicator rewrite project, which will use the
same worker process for much more, to handle the communications with the
pageservers. For now, though, it merely handles the metrics requests.
In the future, we will add more metrics, and perhaps even APIs to
control the running Postgres instance.
The exporter listens on a Unix Domain socket within the Postgres data
directory. A Unix Domain socket is a bit unconventional, but it has some
advantages:
- Permissions are taken care of. Only processes that can access the data
directory, and therefore already have full access to the running
Postgres instance, can connect to it.
- No need to allocate and manage a new port number for the listener
It has some downsides too: it's not immediately accessible from the
outside world, and the functions to work with Unix Domain sockets are
more low-level than TCP sockets (see the symlink hack in
`postgres_metrics_client.rs`, for example).
To expose the metrics from the local Unix Domain Socket to the
autoscaling agent, introduce a new '/autoscaling_metrics' endpoint in
the compute_ctl's HTTP server. Currently it merely forwards the request
to the Postgres instance, but we could add rate limiting and access
control there in the future.
---------
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
It's helpful to correlate requests and responses in local investigations
where the issue is reproducible. Hence, log the rel, fork and block of
the get page response.
NB: effectively a no-op in the neon env since the handling is config
gated
in storcon
## Problem
When a pageserver suffers from a local disk/node failure and restarts,
the storage controller will receive a re-attach call and return all the
tenants the pageserver is suppose to attach, but the pageserver will not
act on any tenants that it doesn't know about locally. As a result, the
pageserver will not rehydrate any tenants from remote storage if it
restarted following a local disk loss, while the storage controller
still thinks that the pageserver have all the tenants attached. This
leaves the system in a bad state, and the symptom is that PG's
pageserver connections will fail with "tenant not found" errors.
## Summary of changes
Made a slight change to the storage controller's `re_attach` API:
* The pageserver will set an additional bit `empty_local_disk` in the
reattach request, indicating whether it has started with an empty disk
or does not know about any tenants.
* Upon receiving the reattach request, if this `empty_local_disk` bit is
set, the storage controller will go ahead and clear all observed
locations referencing the pageserver. The reconciler will then discover
the discrepancy between the intended state and observed state of the
tenant and take care of the situation.
To facilitate rollouts this extra behavior in the `re_attach` API is
guarded by the `handle_ps_local_disk_loss` command line flag of the
storage controller.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
See https://databricks.slack.com/archives/C092W8NBXC0/p1752924508578339
In case of larger number of databases and large `max_connections` we can
open too many connection for parallel apply config which may cause `Too
many open files` error.
## Summary of changes
Limit maximal number of parallel config apply connections by 100.
---------
Co-authored-by: Kosntantin Knizhnik <konstantin.knizhnik@databricks.com>
## Problem
While running tenant split tests I ran into a situation where PG got
stuck completely. This seems to be a general problem that was not found
in the previous chaos testing fixes.
What happened is that if PG gets throttled by PS, and SC decided to move
some tenant away, then PG reconfiguration could be blocked forever
because it cannot talk to the old PS anymore to refresh the throttling
stats, and reconfiguration cannot proceed because it's being throttled.
Neon has considered the case that configuration could be blocked if the
PG storage is full, but forgot the backpressure case.
## Summary of changes
The PR fixes this problem by simply skipping throttling while PS is
being configured, i.e., `max_cluster_size < 0`. An alternative fix is to
set those throttle knobs to -1 (e.g., max_replication_apply_lag),
however these knobs were labeled with PGC_POSTMASTER so their values
cannot be changed unless we restart PG.
## How is this tested?
Tested manually.
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
We want to have the data-api served by the proxy directly instead of
relying on a 3rd party to run a deployment for each project/endpoint.
## Summary of changes
With the changes below, the proxy (auth-broker) becomes also a
"rest-broker", that can be thought of as a "Multi-tenant" data-api which
provides an automated REST api for all the databases in the region.
The core of the implementation (that leverages the subzero library) is
in proxy/src/serverless/rest.rs and this is the only place that has "new
logic".
---------
Co-authored-by: Ruslan Talpa <ruslan.talpa@databricks.com>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
## Problem
Add a test for max_wal_rate
## Summary of changes
Test max_wal_rate
## How is this tested?
python test
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
Include the ip address (optionally read from an env var) in the
pageserver's registration request.
Note that the ip address is ignored by the storage controller at the
moment, which makes it a no-op
in the neon env.
A replacement for #10254 which allows us to introduce notice messages
for sql-over-http in the future if we want to. This also removes the
`ParameterStatus` and `Notification` handling as there's nothing we
could/should do for those.
## Problem
We've had bugs where the compute would use the stale default stripe size
from an unsharded tenant after the tenant split with a new stripe size.
## Summary of changes
Never specify a stripe size for unsharded tenants, to guard against
misuse. Only specify it once tenants are sharded and the stripe size
can't change.
Also opportunistically changes `GetPageSplitter` to return
`anyhow::Result`, since we'll be using this in other code paths as well
(specifically during server-side shard splits).
## Problem
Postgres will often immediately follow a relation existence check with a
relation size query. This incurs two roundtrips, and may prevent
effective caching.
See [Slack
thread](https://databricks.slack.com/archives/C091SDX74SC/p1751951732136139).
Touches #11728.
## Summary of changes
For the gRPC API:
* Add an `allow_missing` parameter to `GetRelSize`, which returns
`missing=true` instead of a `NotFound` error.
* Remove `CheckRelExists`.
There are no changes to libpq behavior.
## Problem
`ShardStripeSize` will be used in the compute spec and internally in the
communicator. It shouldn't require pulling in all of `pageserver_api`.
## Summary of changes
Move `ShardStripeSize` into `utils::shard`, along with other basic shard
types. Also remove the `Default` implementation, to discourage clients
from falling back to a default (it's generally a footgun).
The type is still re-exported from `pageserver_api::shard`, along with
all the other shard types.
## Problem
The gRPC page service does not properly react to shutdown cancellation.
In particular, Tonic considers an open GetPage stream to be an in-flight
request, so it will wait for it to complete before shutting down.
Touches [LKB-191](https://databricks.atlassian.net/browse/LKB-191).
## Summary of changes
Properly react to the server's cancellation token and take out gate
guards in gRPC request handlers.
Also document cancellation handling. In particular, that Tonic will drop
futures when clients go away (e.g. on timeout or shutdown), so the read
path must be cancellation-safe. It is believed to be (modulo possible
logging noise), but this will be verified later.
## Problem
As reported in #10441 the `control_plane/README/md` incorrectly
specified that `--pg-version` should be specified in the `cargo neon
init` command. This is not the case and causes an invalid argument
error.
## Summary of changes
Fix the README
## Test Plan
I verified that the steps in the README now work locally. I connected to
the started postgres endpoint and executed some basic metadata queries.
## Problem
Close LKB-270. This is part of our series of efforts to make sure
lsn_lease API prompts clients to retry. Follow up of
https://github.com/neondatabase/neon/pull/12631.
Slack thread w/ Vlad:
https://databricks.slack.com/archives/C09254R641L/p1752677940697529
## Summary of changes
- Use `tenant_remote_mutation` API for LSN leases. Makes it consistent
with new APIs added to storcon.
- For 404, we now always retry because we know the tenant is
to-be-attached and will eventually reach a point that we can find that
tenant on the intent pageserver.
- Using the `tenant_remote_mutation` API also prevents us from the case
where the intent pageserver changes within the lease request. The
wrapper function will error with 503 if such things happen.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
A high rate of short-lived connections means that there a lot of cancel
keys in Redis with TTL=10min that could be avoided by having a much
shorter initial TTL.
## Summary of changes
* Introduce an initial TTL of 1min used with the SET command.
* Fix: don't delay repushing cancel data when expired.
* Prepare for exponentially increasing TTLs.
## Alternatives
A best-effort UNLINK command on connection termination would clean up
cancel keys right away. This needs a bigger refactor due to how batching
is handled.
## Problem
We currently offload LFC state unconditionally, which can cause
problems. Imagine a situation:
1. Endpoint started with `autoprewarm: true`.
2. While prewarming is not completed, we upload the new incomplete
state.
3. Compute gets interrupted and restarts.
4. We start again and try to prewarm with the state from 2. instead of
the previous complete state.
During the orchestrated prewarming, it's probably not a big issue, but
it's still better to do not interfere with the prewarm process.
## Summary of changes
Do not offload LFC state if we are currently prewarming or any issue
occurred. While on it, also introduce `Skipped` LFC prewarm status,
which is used when the corresponding LFC state is not present in the
endpoint storage. It's primarily needed to distinguish the first compute
start for particular endpoint, as it's completely valid to do not have
LFC state yet.
## Problem
Previously, if a get page failure was cause by timeline shutdown, the
pageserver would attempt to tear down the connection gracefully:
`shutdown(SHUT_WR)` followed by `close()`.
This triggers a code path on the compute where it has to tell apart
between an idle connection and a closed one. That code is bug prone, so
we can just side-step the issue by shutting down the connection via a
libpq error message.
This surfaced as instability in test_shard_resolve_during_split_abort.
It's a new test, but the issue existed for ages.
## Summary of Changes
Send a libpq error message instead of doing graceful TCP connection
shutdown.
Closes LKB-648
## Problem
See https://databricks.slack.com/archives/C09254R641L/p1752004515032899
stripe_size GUC update may be delayed at different backends and so cause
inconsistency with connection strings (shard map).
## Summary of changes
Postmaster should store stripe_size in shared memory as well as
connection strings.
It should be also enforced that stripe size is defined prior to
connection strings in postgresql.conf
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Kosntantin Knizhnik <konstantin.knizhnik@databricks.com>
## Problem
Initializing of shared memory in extension is complex and non-portable.
In neon extension this boilerplate code is duplicated in several files.
## Summary of changes
Perform all initialization in one place - neon.c
All other module procvide *ShmemRequest() and *ShmemInit() fuinction
which are called from neon.c
---------
Co-authored-by: Kosntantin Knizhnik <konstantin.knizhnik@databricks.com>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
Follow up of https://github.com/neondatabase/neon/pull/12620
Discussions:
https://databricks.slack.com/archives/C09254R641L/p1752677940697529
The original code and after the patch above we converts 404s to 503s
regardless of the type of 404. We should only do that for tenant not
found errors. For other 404s like timeline not found, we should not
prompt clients to retry.
## Summary of changes
- Inspect the response body to figure out the type of 404. If it's a
tenant not found error, return 503.
- Otherwise, fallthrough and return 404 as-is.
- Add `tenant_shard_remote_mutation` that manipulates a single shard.
- Use `Service::tenant_shard_remote_mutation` for tenant shard
passthrough requests. This prevents us from another race that the attach
state changes within the request. (This patch mainly addresses the case
that the tenant is "not yet attached").
- TODO: lease API is still using the old code path. We should refactor
it to use `tenant_remote_mutation`.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Putting this in the neon codebase for now, to experiment. Can be lifted
into measured at a later date.
This metric family is like a MetricVec, but it only supports 1 label
being set at a time. It is useful for reporting info, rather than
reporting metrics.
https://www.robustperception.io/exposing-the-software-version-to-prometheus/
Second PR for the hashmap behind the updated LFC implementation ([see
first here](https://github.com/neondatabase/neon/pull/12595)). This only
adds the raw code for the hashmap/lock implementations and doesn't plug
it into the crate (that's dependent on the previous PR and should
probably be done when the full integration into the new communicator is
merged alongside `communicator-rewrite` changes?).
Some high level details: the communicator codebase expects to be able to
store references to entries within this hashmap for arbitrary periods of
time and so the hashmap cannot be allowed to move them during a rehash.
As a result, this implementation has a slightly unusual structure where
key-value pairs (and hash chains) are allocated in a separate region
with a freelist. The core hashmap structure is then an array of
"dictionary entries" that are just indexes into this region of key-value
pairs.
Concurrency support is very naive at the moment with the entire map
guarded by one big `RwLock` (which is implemented on top of a
`pthread_rwlock_t` since Rust doesn't guarantee that a
`std::sync::RwLock` is safe to use in shared memory). This (along with a
lot of other things) is being changed on the
`quantumish/lfc-resizable-map` branch.
## Problem
The `keep_failing_reconciles` counter was introduced in #12391, but
there is a special case:
> if a reconciliation loop claims to have succeeded, but maybe_reconcile
still thinks the tenant is in need of reconciliation, then that's a
probable bug and we should activate a similar backoff to prevent
flapping.
This PR redefines "flapping" to include not just repeated failures, but
also consecutive reconciliations of any kind (success or failure).
## Summary of Changes
- Replace `keep_failing_reconciles` with a new `stuck_reconciles` metric
- Replace `MAX_CONSECUTIVE_RECONCILIATION_ERRORS` with
`MAX_CONSECUTIVE_RECONCILES`, and increasing that from 5 to 10
- Increment the consecutive reconciles counter for all reconciles, not
just failures
- Reset the counter in `reconcile_all` when no reconcile is needed for a
shard
- Improve and fix the related test
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## Problem
The forward compatibility test is erroneously
using the downloaded (old) compatibility data. This test is meant to
test that old binaries can work with **new** data. Using the old
compatibility data renders this test useless.
## Summary of changes
Use new snapshot in test_forward_compat
Closes LKB-666
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
The force deletion API should behave like the graceful deletion API - it
needs to support cancellation, persistence, and be non-blocking.
## Summary of Changes
- Added a `force` flag to the `NodeStartDelete` command.
- Passed the `force` flag through the `start_node_delete` handler in the
storage controller.
- Handled the `force` flag in the `delete_node` function.
- Set the tombstone after removing the node from memory.
- Minor cleanup, like adding a `get_error_on_cancel` closure.
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## Problem
part of https://github.com/neondatabase/neon/issues/11318 ; it is not
entirely safe to run gc-compaction over the metadata key range due to
tombstones and implications of image layers (missing key in image layer
== key not exist). The auto gc-compaction trigger already skips metadata
key ranges (see `schedule_auto_compaction` call in
`trigger_auto_compaction`). In this patch we enforce it directly in
gc_compact_inner so that compactions triggered via HTTP API will also be
subject to this restriction.
## Summary of changes
Ensure gc-compaction only runs on rel key ranges.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`make neon-pgindent` doesn't work:
- there's no `$(BUILD_DIR)/neon-v17` dir
- `make -C ...` along with relative `BUILD_DIR` resolves to a path that
doesn't exist
## Summary of changes
- Fix path for to neon extension for `make neon-pgindent`
- Make `BUILD_DIR` absolute
- Remove trailing slash from `POSTGRES_INSTALL_DIR` to avoid duplicated
slashed in commands (doesn't break anything, it make it look nicer)
This PR simplifies our node info cache. Now we'll store entries for at
most the TTL duration, even if Redis notifications are available. This
will allow us to cache intermittent errors later (e.g. due to rate
limits) with more predictable behavior.
Related to https://github.com/neondatabase/cloud/issues/19353
## Problem
We were only resetting the limit in the wal proposer. If backends are
back pressured, it might take a while for the wal proposer to receive a
new WAL to reset the limit.
## Summary of changes
Backend also checks the time and resets the limit.
## How is this tested?
pgbench has more smooth tps
Signed-off-by: Tristan Partin <tristan.partin@databricks.com>
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
## Problem
close LKB-270, close LKB-253
We periodically saw pageserver returns 404 -> storcon converts it to 500
to cplane, and causing branch operations fail. This is due to storcon is
migrating tenants across pageservers and the request was forwarded from
the storcon to pageservers while the tenant was not attached yet. Such
operations should be retried from cplane and storcon should return 503
in such cases.
## Summary of changes
- Refactor `tenant_timeline_lsn_lease` to have a single function process
and passthrough such requests: `collect_tenant_shards` for collecting
all shards and checking if they're consistent with the observed state,
`process_result_and_passthrough_errors` to convert 404 into 503 if
necessary.
- `tenant_shard_node` also checks observed state now.
Note that for passthrough shard0, we originally had a check to convert
404 to 503:
```
// Transform 404 into 503 if we raced with a migration
if resp.status() == reqwest::StatusCode::NOT_FOUND {
// Look up node again: if we migrated it will be different
let new_node = service.tenant_shard_node(tenant_shard_id).await?;
if new_node.get_id() != node.get_id() {
// Rather than retry here, send the client a 503 to prompt a retry: this matches
// the pageserver's use of 503, and all clients calling this API should retry on 503.
return Err(ApiError::ResourceUnavailable(
format!("Pageserver {node} returned 404, was migrated to {new_node}").into(),
));
}
}
```
However, this only checks the intent state. It is possible that the
migration is in progress before/after the request is processed and
intent state is always the same throughout the API call, therefore 404
not being processed by this branch.
Also, not sure about if this new code is correct or not, need second
eyes on that:
```
// As a reconciliation is in flight, we do not have the observed state yet, and therefore we assume it is always inconsistent.
Ok((node.clone(), false))
```
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The warning message was seen during deployment, but it's actually OK.
## Summary of changes
- Treat `"No broker updates received for a while ..."` as an info
message.
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
N.B: No-op for the neon-env.
## Problem
We added a per-timeline disk utilization protection circuit breaker,
which will stop the safekeeper from accepting more WAL writes if the
disk utilization by the timeline has exceeded a configured limit. We
mainly designed the mechanism as a guard against WAL upload/backup bugs,
and we assumed that as long as WAL uploads are proceeding as normal we
will not run into disk pressure. This turned out to be not true. In one
of our load tests where we have 500 PGs ingesting data at the same time,
safekeeper disk utilization started to creep up even though WAL uploads
were completely normal (we likely just maxed out our S3 upload bandwidth
from the single SK). This means the per-timeline disk utilization
protection won't be enough if too many timelines are ingesting data at
the same time.
## Summary of changes
Added a global disk utilization protection circuit breaker which will
stop a safekeeper from accepting more WAL writes if the total disk usage
on the safekeeper (across all tenants) exceeds a limit. We implemented
this circuit breaker through two parts:
1. A "global disk usage watcher" background task that runs at a
configured interval (default every minute) to see how much disk space is
being used in the safekeeper's filesystem. This background task also
performs the check against the limit and publishes the result to a
global atomic boolean flag.
2. The `hadron_check_disk_usage()` routine (in `timeline.rs`) now also
checks this global boolean flag published in the step above, and fails
the `WalAcceptor` (triggers the circuit breaker) if the flag was raised.
The disk usage limit is disabled by default.
It can be tuned with the `--max-global-disk-usage-ratio` CLI arg.
## How is this tested?
Added integration test
`test_wal_acceptor.py::test_global_disk_usage_limit`.
Also noticed that I haven't been using the `wait_until(f)` test function
correctly (the `f` passed in is supposed to raise an exception if the
condition is not met, instead of returning `False`...). Fixed it in both
circuit breaker tests.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
In the gap between picking an optimization and applying it, something
might insert a change to the intent state that makes it incompatible.
If the change is done via the `schedule()` method, we are covered by the
increased sequence number, but otherwise we can panic if we violate the
intent state invariants.
## Summary of Changes
Validate the optimization right before applying it. Since we hold the
service lock at that point, nothing else can sneak in.
Closes LKB-65
## Problem
We run multiple proxies, we get logs like
```
... spans={"http_conn#22":{"conn_id": ...
... spans={"http_conn#24":{"conn_id": ...
```
these are the same span, and the difference is confusing.
## Summary of changes
Introduce a counter per span name, rather than a global counter. If the
counter is 0, no change to the span name is made.
To follow up: see which span names are duplicated within the codebase in
different callsites
## Problem
We have several linters that use Node.js, but they are currently set up
differently, both locally and on CI.
## Summary of changes
- Add Node.js to `build-tools` image
- Move `compute/package.json` -> `build-tools/package.json` and add
`redocly` to it `@redocly/cli`
- Unify and merge into one job `lint-openapi-spec` and
`validate-compute-manifest`
## Problem
neondatabase/neon#12601 did't compleatly disable writing `*.profraw`
files, but instead of `/tmp/coverage` it started to write into the
current directory
## Summary of changes
- Set `LLVM_PROFILE_FILE=/dev/null` to avoing writing `*.profraw` at all
Initial PR for the hashmap behind the updated LFC implementation. This
refactors `neon-shmem` so that the actual shared memory utilities are in
a separate module within the crate. Beyond that, it slightly changes
some of the docstrings so that they play nicer with `cargo doc`.
We don't want to depend on postgres_ffi in an API crate. If there is no
such dependency, we can compile stuff like `storcon_cli` without needing
a full working postgres build. Fixes regression of #12548 (before we
could compile it).
- Remove a few obsolete "allowed error messages" from tests. The
pageserver doesn't emit those messages anymore.
- Remove misplaced and outdated docstring comment from
`test_tenants.py`. A docstring is supposed to be the first thing in a
function, but we had added some code before it. And it was outdated, as
we haven't supported running without safekeepers for a long time.
- Fix misc typos in comments
- Remove obsolete comment about backwards compatibility with safekeepers
without `TIMELINE_STATUS` API. All safekeepers have it by now.
## Problem
We don't use code coverage produced by `regress-tests`
(neondatabase/neon#6798), so there's no need to collect it. Potentially,
disabling it should reduce the load on disks and improve the stability
of debug builds.
## Summary of changes
- Disable code coverage collection for regression tests
## Problem
This is a prerequisite for neondatabase/neon#12575 to keep all things
relevant to `build-tools` image in a single directory
## Summary of changes
- Rename `build_tools/` to `build-tools/`
- Move `build-tools.Dockerfile` to `build-tools/Dockerfile`
## Problem
Not all cplane errors are properly recognized and cached/retried.
## Summary of changes
Add more cplane error reasons. Also, use retry_delay_ms as cache TTL if
present.
Related to https://github.com/neondatabase/cloud/issues/19353
All Errors that can occur during get_installed_extensions() come from
tokio-postgres functions, e.g. if the database is being shut down
("FATAL: terminating connection due to administrator command"). I'm
seeing a lot of such errors in the logs with the regression tests, with
very verbose stack traces. The compute_ctl stack trace is pretty useless
for errors originating from the Postgres connection, the error message
has all the information, so stop printing the stack trace.
I changed the result type of the functions to return the originating
tokio_postgres Error rather than anyhow::Error, so that if we introduce
other error sources to the functions where the stack trace might be
useful, we'll be forced to revisit this, probably by introducing a new
Error type that separates postgres errors from other errors. But this
will do for now.
We didn't consistently apply these, and it wasn't consistently solved.
With this patch we should have a more consistent approach to this, and
have less issues porting changes to newer versions.
This also removes some potentially buggy casts to `long` from `uint64` -
they could've truncated the value in systems where `long` only has 32
bits.
Include records and image in the debug get page handler.
This endpoint does not update the metrics and does not support tracing.
Note that this now returns individual bytes which need to be encoded
properly for debugging.
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
# TLDR
This PR is a no-op.
## Problem
When a SK loses a disk, it must recover all WALs from the very
beginning. This may take days/weeks to catch up to the latest WALs for
all timelines it owns.
## Summary of changes
When SK starts up,
if it finds that it has 0 timelines,
- it will ask SC for the timeline it owns.
- Then, pulls the timeline from its peer safekeepers to restore the WAL
redundancy right away.
After pulling timeline is complete, it will become active and accepts
new WALs.
The current impl is a prototype. We can optimize the impl further, e.g.,
parallel pull timelines.
---------
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
https://github.com/neondatabase/cloud/issues/19011
Measure relative performance for prewarmed and non-prewarmed endpoints.
Add test that runs on every commit, and one performance test with a
remote cluster.
## Problem
In https://github.com/neondatabase/neon/pull/12513, the new code was
implemented to retry 404 errors caused by the replication lag. However,
this implemented the new logic, making the script more complicated,
while we have an existing one in `neon_api.py`.
## Summary of changes
The existing mechanism is used to retry 404 errors.
---------
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
The communicator gRPC client currently uses bounded client/stream pools.
This can artificially constrain clients, especially after we remove
pipelining in #12584.
[Benchmarks](https://github.com/neondatabase/neon/pull/12583) show that
the cost of an idle server-side GetPage worker task is about 26 KB (2.5
GB for 100,000), so we can afford to scale out.
In the worst case, we'll degenerate to the current libpq state with one
stream per backend, but without the TCP connection overhead. In the
common case we expect significantly lower stream counts due to stream
sharing, driven e.g. by idle backends, LFC hits, read coalescing,
sharding (backends typically only talk to one shard at a time), etc.
Currently, Pageservers rarely serve more than 4000 backend connections,
so we have at least 2 orders of magnitude of headroom.
Touches #11735.
Requires #12584.
## Summary of changes
Remove the pool limits, and restructure the pools.
We still keep a separate bulk pool for Getpage batches of >4 pages (>32
KB), with fewer streams per connection. This reduces TCP-level
congestion and head-of-line blocking for non-bulk requests, and
concentrates larger window sizes on a smaller set of
streams/connections, presumably reducing memory usage. Apart from this,
bulk requests don't have any latency penalty compared to other requests.
## Problem
We don't log the timeline ID when rolling ephemeral layers during
housekeeping.
Resolves [LKB-179](https://databricks.atlassian.net/browse/LKB-179)
## Summary of changes
Add a span with timeline ID when calling `maybe_freeze_ephemeral_layer`
from the housekeeping loop.
We don't instrument the function itself, since future callers may not
have a span including the tenant_id already, but we don't want to
duplicate the tenant_id for these spans.
## Problem
The communicator gRPC client currently attempts to pipeline GetPage
requests from multiple callers onto the same gRPC stream. This has a
number of issues:
* Head-of-line blocking: the request may block on e.g. layer download or
LSN wait, delaying the next request.
* Cancellation: we can't easily cancel in-progress requests (e.g. due to
timeout or backend termination), so it may keep blocking the next
request (even its own retry).
* Complex stream scheduling: picking a stream becomes harder/slower, and
additional Tokio tasks and synchronization is needed for stream
management.
Touches #11735.
Requires #12579.
## Summary of changes
This patch removes pipelining of gRPC stream requests, and instead
prefers to scale out the number of streams to achieve the same
throughput. Stream scheduling has been rewritten, and mostly follows the
same pattern as the client pool with exclusive acquisition by a single
caller.
[Benchmarks](https://github.com/neondatabase/neon/pull/12583) show that
the cost of an idle server-side GetPage worker task is about 26 KB (2.5
GB for 100,000), so we can afford to scale out.
This has a number of advantages:
* It (mostly) eliminates head-of-line blocking (except at the TCP
level).
* Cancellation becomes trivial, by closing the stream.
* Stream scheduling becomes significantly simpler and cheaper.
* Individual callers can still use client-side batching for pipelining.
## Problem
The new communicator gRPC client has significantly worse Pagebench
performance than a basic gRPC client. We need to find out why.
## Summary of changes
Add a `pagebench --profile` flag which takes a client CPU profile of the
benchmark and writes a flamegraph to `profile.svg`.
## Problem
It can take 3x the idle timeout to reap a channel. We have to wait for
the idle timeout to trigger first for the stream, then the client, then
the channel.
Touches #11735.
## Summary of changes
Reap empty channels immediately, and rely indirectly on the
channel/stream timeouts.
This can still lead to 2x the idle timeout for streams (first stream
then client), but that's okay -- if the stream closes abruptly (e.g. due
to timeout or error) we want to keep the client around in the pool for a
while.
## Problem
gRPC client retries currently include pool acquisition under the
per-attempt timeout. If pool acquisition is slow (e.g. full pool), this
will cause spurious timeout warnings, and the caller will lose its place
in the pool queue.
Touches #11735.
## Summary of changes
Makes several improvements to retries and related logic:
* Don't include pool acquisition time under request timeouts.
* Move attempt timeouts out of `Retry` and into the closure.
* Make `Retry` configurable, move constants into main module.
* Don't backoff on the first retry, and reduce initial/max backoffs to
5ms and 5s respectively.
* Add `with_retries` and `with_timeout` helpers.
* Add slow logging for pool acquisition, and a `warn_slow` counterpart
to `log_slow`.
* Add debug logging for requests and responses at the client boundary.
## Problem
For the communicator scheduling policy, we need to understand the
server-side cost of idle gRPC streams.
Touches #11735.
## Summary of changes
Add an `idle-streams` benchmark to `pagebench` which opens a large
number of idle gRPC GetPage streams.
## Problem
When refreshing cancellation data we resend the entire value again just
to reset the TTL, which causes unnecessary load in proxy, on network and
possibly on redis side.
## Summary of changes
* Switch from using SET with full value to using EXPIRE to reset TTL.
* Add a tiny delay between retries to prevent busy loop.
* Shorten CancelKeyOp variants: drop redundant suffix.
* Retry SET when EXPIRE failed.
## Problem
When a connection terminates its maintain_cancel_key task keeps running
until the CANCEL_KEY_REFRESH sleep finishes and then it triggers another
cancel key TTL refresh before exiting.
## Summary of changes
* Check for cancellation while sleeping and interrupt sleep.
* If cancelled, break the loop, don't send a refresh cmd.
## Problem
We don't validate the validity of the `new_sk_set` before starting the
migration. It is validated later, so the migration to an invalid
safekeeper set will fail anyway. But at this point we might already
commited an invalid `new_sk_set` to the database and there is no `abort`
command yet (I ran into this issue in neon_local and ruined the timeline
:)
- Part of https://github.com/neondatabase/neon/issues/11669
## Summary of changes
- Add safekeeper count and safekeeper duplication checks before starting
the migration
- Test that we validate the `new_sk_set` before starting the migration
- Add `force` option to the `TimelineSafekeeperMigrateRequest` to
disable not-mandatory checks
Serialize query row responses directly into JSON. Some of this code
should be using the `json::value_as_object/list` macros, but I've
avoided it for now to minimize the size of the diff.
## Problem
To store cancellation data we send two commands to redis because the
redis server version doesn't support HSET with EX. Also, HSET is not
really needed.
## Summary of changes
* Replace the HSET + EXPIRE command pair with one SET .. EX command.
* Replace HGET with GET.
* Leave a workaround for old keys set with HSET.
* Replace some anyhow errors with specific errors to surface the
WRONGTYPE error from redis.
# TLDR
Problem-I is a bug fix. The rest are no-ops.
## Problem I
Page server checks image layer creation based on the elapsed time but
this check depends on the current logical size, which is only computed
on shard 0. Thus, for non-0 shards, the check will be ineffective and
image creation will never be done for idle tenants.
## Summary of changes I
This PR fixes the problem by simply removing the dependency on current
logical size.
## Summary of changes II
This PR adds a timeout when calling page server to split shard to make
sure SC does not wait for the API call forever. Currently the PR doesn't
adds any retry logic because it's not clear whether page server shard
split can be safely retried if the existing operation is still ongoing
or left the storage in a bad state. Thus it's better to abort the whole
operation and restart.
## Problem III
`test_remote_failures` requires PS to be compiled in the testing mode.
For PS in dev/staging, they are compiled without this mode.
## Summary of changes III
Remove the restriction and also increase the number of total failures
allowed.
## Summary of changes IV
remove test on PS getpage http route.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Yecheng Yang <carlton.yang@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
## Problem
close LKB-162
close https://github.com/neondatabase/cloud/issues/30665, related to
https://github.com/neondatabase/cloud/issues/29434
We see a lot of errors like:
```
2025-05-22T23:06:14.928959Z ERROR compaction_loop{tenant_id=? shard_id=0304}:run:gc_compact_timeline{timeline_id=?}: error applying 4 WAL records 35/DC0DF0B8..3B/E43188C0 (8119 bytes) to key 000000067F0000400500006027000000B9D0, from base image with LSN 0/0 to reconstruct page image at LSN 61/150B9B20 n_attempts=0: apply_wal_records
Caused by:
0: read walredo stdout
1: early eof
```
which is an acceptable form of error and we should downgrade it to
warning.
## Summary of changes
walredo error during gc-compaction is expected when the data below the
gc horizon does not contain a full key history. This is possible in some
rare cases of gc that is only able to remove data in the middle of the
history but not all earlier history when a full keyspace gets deleted.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Fixes [LKB-61](https://databricks.atlassian.net/browse/LKB-61):
`test_timeline_archival_chaos` being flaky with storcon error `Requested
tenant is missing`.
When a tenant migration is ongoing, and the attach request has been sent
to the new location, but the attach hasn't finished yet, it is possible
for the pageserver to return a 412 precondition failed HTTP error on
timeline deletion, because it is being sent to the new location already.
That one we would previously log via sth like:
```
ERROR request{method=DELETE path=/v1/tenant/1f544a11c90d1afd7af9b26e48985a4e/timeline/32818fb3ebf07cb7f06805429d7dee38 request_id=c493c04b-7f33-46d2-8a65-aac8a5516055}: Error processing HTTP request: InternalServerError(Error deleting timeline 32
818fb3ebf07cb7f06805429d7dee38 on 1f544a11c90d1afd7af9b26e48985a4e on node 2 (localhost): pageserver API: Precondition failed: Requested tenant is missing
```
This patch changes that and makes us return a more reasonable resource
unavailable error. Not sure how scalable this is with tenants with a
large number of shards, but that's a different discussion (we'd probably
need a limited amount of per-storcon retries).
example
[link](https://neon-github-public-dev.s3.amazonaws.com/reports/pr-12398/15981821532/index.html#/testresult/e7785dfb1238d92f).
Update the WSS estimate before acquring the lock, so that we don't need
to hold the lock for so long. That seems safe to me, see added comment.
I was planning to do this with the new rust-based communicator
implementation anyway, but it might help a little with the current C
implementation too. And more importantly, having this as a separate PR
gives us a chance to review this aspect independently.
## Problem
Canceelation requires redis, redis required control-plane.
## Summary of changes
Make redis for cancellation not require control plane.
Add instructions for setting up redis locally.
Split the functions into two: one internal function to calculate the
estimate, and another (two functions) to expose it as SQL functions.
This is in preparation of adding new communicator implementation. With
that, the SQL functions will dispatch the call to the old or new
implementation depending on which is being used.
This is a no-op for the neon deployment
* Introduce the concept image consistent lsn: of the largest LSN below
which all pages have been redone successfully
* Use the image consistent LSN for forced image layer creations
* Optionally expose the image consistent LSN via the timeline describe
HTTP endpoint
* Add a sharded timeline describe endpoint to storcon
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
We have a `safekeeper_migrate` handler, but no subcommand in
`storcon_cli`. Same for `/:timeline_id/locate` for identifying current
set of safekeepers.
- Closes: https://github.com/neondatabase/neon/issues/12395
## Summary of changes
- Add `timeline-safekeeper-migrate` and `timeline-locate` subcommands to
`storcon_cli`
On December 8th, 2023, an engineering escalation (INC-110) was opened
after it was found that BYPASSRLS was being applied to all roles.
PR that introduced the issue:
https://github.com/neondatabase/neon/pull/5657
Subsequent commit on main:
ad99fa5f03
NOBYPASSRLS and INHERIT are the defaults for a Postgres role, but
because it isn't easy to know if a Postgres cluster is affected by the
issue, we need to keep the migration around for a long time, if not
indefinitely, so any cluster can be fixed.
Branching is the gift that keeps on giving...
Signed-off-by: Tristan Partin <tristan.partin@databricks.com>
Signed-off-by: Tristan Partin <tristan.partin@databricks.com>
## Problem
With gRPC `GetPageRequest` batches, we'll have non-trivial
fragmentation/reassembly logic in several places of the stack
(concurrent reads, shard splits, LFC hits, etc). If we included the
block numbers with the pages in `GetPageResponse` we could have better
verification and observability that the final responses are correct.
Touches #11735.
Requires #12480.
## Summary of changes
Add a `Page` struct with`block_number` for `GetPageResponse`, along with
the `RelTag` for completeness, and verify them in the rich gRPC client.
## Problem
Part of LKB-379
The pageserver connstrings are updated in the postmaster and then
there's a hook to propagate it to the shared memory of all backends.
However, the shard stripe doesn't. This would cause problems during
shard splits:
* the compute has active reads/writes
* shard split happens and the cplane applies the new config (pageserver
connstring + stripe size)
* pageserver connstring will be updated immediately once the postmaster
receives the SIGHUP, and it will be copied over the the shared memory of
all other backends.
* stripe size is a normal GUC and we don't have special handling around
that, so if any active backend has ongoing txns the value won't be
applied.
* now it's possible for backends to issue requests based on the wrong
stripe size; what's worse, if a request gets cached in the prefetch
buffer, it will get stuck forever.
## Summary of changes
To make sure it aligns with the current default in storcon.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`GetPageRequest::request_id` is supposed to be a unique ID for a
request. It's not, because we may retry the request using the same ID.
This causes assertion failures and confusion.
Touches #11735.
Requires #12480.
## Summary of changes
Extend the request ID with a retry attempt, and handle it in the gRPC
client and server.
## Problem
One PG tenant may write too fast and overwhelm the PS. The other tenants
sharing the same PSs will get very little bandwidth.
We had one experiment that two tenants sharing the same PSs. One tenant
runs a large ingestion that delivers hundreds of MB/s while the other
only get < 10 MB/s.
## Summary of changes
Rate limit how fast PG can generate WALs. The default is -1. We may
scale the default value with the CPU count. Need to run some experiments
to verify.
## How is this tested?
CI.
PGBench. No limit first. Then set to 1 MB/s and you can see the tps
drop. Then reverted the change and tps increased again.
pgbench -i -s 10 -p 55432 -h 127.0.0.1 -U cloud_admin -d postgres
pgbench postgres -c 10 -j 10 -T 6000000 -P 1 -b tpcb-like -h 127.0.0.1
-U cloud_admin -p 55432
progress: 33.0 s, 986.0 tps, lat 10.142 ms stddev 3.856 progress: 34.0
s, 973.0 tps, lat 10.299 ms stddev 3.857 progress: 35.0 s, 1004.0 tps,
lat 9.939 ms stddev 3.604 progress: 36.0 s, 984.0 tps, lat 10.183 ms
stddev 3.713 progress: 37.0 s, 998.0 tps, lat 10.004 ms stddev 3.668
progress: 38.0 s, 648.9 tps, lat 12.947 ms stddev 24.970 progress: 39.0
s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 40.0 s, 0.0 tps, lat
0.000 ms stddev 0.000 progress: 41.0 s, 0.0 tps, lat 0.000 ms stddev
0.000 progress: 42.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress:
43.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 44.0 s, 0.0 tps,
lat 0.000 ms stddev 0.000 progress: 45.0 s, 0.0 tps, lat 0.000 ms stddev
0.000 progress: 46.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress:
47.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 48.0 s, 0.0 tps,
lat 0.000 ms stddev 0.000 progress: 49.0 s, 347.3 tps, lat 321.560 ms
stddev 1805.633 progress: 50.0 s, 346.8 tps, lat 9.898 ms stddev 3.809
progress: 51.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 52.0 s,
0.0 tps, lat 0.000 ms stddev 0.000 progress: 53.0 s, 0.0 tps, lat 0.000
ms stddev 0.000 progress: 54.0 s, 0.0 tps, lat 0.000 ms stddev 0.000
progress: 55.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 56.0 s,
0.0 tps, lat 0.000 ms stddev 0.000 progress: 57.0 s, 0.0 tps, lat 0.000
ms stddev 0.000 progress: 58.0 s, 0.0 tps, lat 0.000 ms stddev 0.000
progress: 59.0 s, 0.0 tps, lat 0.000 ms stddev 0.000 progress: 60.0 s,
0.0 tps, lat 0.000 ms stddev 0.000 progress: 61.0 s, 0.0 tps, lat 0.000
ms stddev 0.000 progress: 62.0 s, 0.0 tps, lat 0.000 ms stddev 0.000
progress: 63.0 s, 494.5 tps, lat 276.504 ms stddev 1853.689 progress:
64.0 s, 488.0 tps, lat 20.530 ms stddev 71.981 progress: 65.0 s, 407.8
tps, lat 9.502 ms stddev 3.329 progress: 66.0 s, 0.0 tps, lat 0.000 ms
stddev 0.000 progress: 67.0 s, 0.0 tps, lat 0.000 ms stddev 0.000
progress: 68.0 s, 504.5 tps, lat 71.627 ms stddev 397.733 progress: 69.0
s, 371.0 tps, lat 24.898 ms stddev 29.007 progress: 70.0 s, 541.0 tps,
lat 19.684 ms stddev 24.094 progress: 71.0 s, 342.0 tps, lat 29.542 ms
stddev 54.935
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
After https://github.com/neondatabase/neon/pull/12240 we observed
issues in our go code as `ComputeStatus` is not stateless, thus doesn't
deserialize as string.
```
could not check compute activity: json: cannot unmarshal object into Go struct field
ComputeState.status of type computeclient.ComputeStatus
```
- Fix this by splitting this status into two.
- Update compute OpenApi spec to reflect changes to `/terminate` in
previous PR
## Problem
If we have catalog update AND a pageserver migration batched in a single
spec, we will not be able to apply the spec (running the SQL) because
the compute is not attached to the right pageserver and we are not able
to read anything if we don't pick up the latest pageserver connstring.
This is not a case for now because cplane always schedules shard split /
pageserver migrations with `skip_pg_catalog_updates` (I suppose).
Context:
https://databricks.slack.com/archives/C09254R641L/p1752163559259399?thread_ts=1752160163.141149&cid=C09254R641L
With this fix, backpressure will likely not be able to affect
reconfigurations.
## Summary of changes
Do `pg_reload_conf` before we apply specs in SQL.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We need to benchmark the rich gRPC client
`client_grpc::PageserverClient` against the basic, no-frills
`page_api::Client` to determine how much overhead it adds.
Touches #11735.
Requires #12476.
## Summary of changes
Add a `pagebench --rich-client` parameter to use
`client_grpc::PageserverClient`. Also adds a compression parameter to
the client.
## Problem
Sometimes we run out of free ports in `PortDistributor`. This affects
particularly failed tests that we rerun automatically up to 3 times
(which makes it use up to 3x more ports)
## Summary of changes
- Cycle over the range of ports to reuse freed ports from previous tests
Ref: LKB-62
## Problem
The communicator gRPC client must support changing the shard map on
splits.
Touches #11735.
Requires #12476.
## Summary of changes
* Wrap the shard set in a `ArcSwap` to allow swapping it out.
* Add a new `ShardSpec` parameter struct to pass validated shard info to
the client.
* Add `update_shards()` to change the shard set. In-flight requests are
allowed to complete using the old shards.
* Restructure `get_page` to use a stable view of the shard map, and
retry errors at the top (pre-split) level to pick up shard map changes.
* Also marks `tonic::Status::Internal` as non-retryable, so that we can
use it for client-side invariant checks without continually retrying
these.
# TLDR
All changes are no-op except some metrics.
## Summary of changes I
### Pageserver
Added a new global counter metric
`pageserver_pagestream_handler_results_total` that categorizes
pagestream request results according to their outcomes:
1. Success
2. Internal errors
3. Other errors
Internal errors include:
1. Page reconstruction error: This probably indicates a pageserver
bug/corruption
2. LSN timeout error: Could indicate overload or bugs with PS's ability
to reach other components
3. Misrouted request error: Indicates bugs in the Storage Controller/HCC
Other errors include transient errors that are expected during normal
operation or errors indicating bugs with other parts of the system
(e.g., malformed requests, errors due to cancelled operations during PS
shutdown, etc.)
## Summary of changes II
This PR adds a pageserver endpoint and its counterpart in storage
controller to list visible size of all tenant shards. This will be a
prerequisite of the tenant rebalance command.
## Problem III
We need a way to download WAL
segments/layerfiles from S3 and replay WAL records. We cannot access
production S3 from our laptops directly, and we also can't transfer any
user data out of production systems for GDPR compliance, so we need
solutions.
## Summary of changes III
This PR adds a couple of tools to support the debugging
workflow in production:
1. A new `pagectl download-remote-object` command that can be used to
download remote storage objects assuming the correct access is set up.
## Summary of changes IV
This PR adds a command to list all visible delta and image layers from
index_part. This is useful to debug compaction issues as index_part
often contain a lot of covered layers due to PITR.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
## Problem
close LKB-253
## Summary of changes
404 for timeline requests could happen when the tenant is intended to be
on a pageserver but not attached yet. This patch adds handling for the
lease request. In the future, we should extend this handling to more
operations.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Safekeeper and pageserver metrics collection might time out. We've seen
this in both hadron and neon.
## Summary of changes
This PR moves metrics collection in PS/SK to the background so that we
will always get some metrics, despite there may be some delays. Will
leave it to the future work to reduce metrics collection time.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
## Problem
The gRPC client pools don't reap idle resources.
Touches #11735.
Requires #12475.
## Summary of changes
Reap idle pool resources (channels/clients/streams) after 3 minutes of
inactivity.
Also restructure the `StreamPool` to use a mutex rather than atomics for
synchronization, for simplicity. This will be optimized later.
This PR introduces a `image_creation_timeout` to page servers so that we
can force the image creation after a certain period. This is set to 1
day on dev/staging for now, and will rollout to production 1/2 weeks
later.
Majority of the PR are boilerplate code to add the new knob. Specific
changes of the PR are:
1. During L0 compaction, check if we should force a compaction if
min(LSN) of all delta layers < force_image_creation LSN.
2. During image creation, check if we should force a compaction if the
image's LSN < force_image_creation LSN and there are newer deltas with
overlapping key ranges.
3. Also tweaked the check image creation interval to make sure we honor
image_creation_timeout.
Vlad's note: This should be a no-op. I added an extra PS config for the
large timeline
threshold to enable this.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
When a function is owned by a superuser (bootstrap user or otherwise),
we consider it safe to run it. Only a superuser could have installed it,
typically from CREATE EXTENSION script: we trust the code to execute.
## Problem
This is intended to solve running pg_graphql Event Triggers
graphql_watch_ddl and graphql_watch_drop which are executing the secdef
function graphql.increment_schema_version().
## Summary of changes
Allow executing Event Trigger function owned by a superuser and with
SECURITY DEFINER properties. The Event Trigger code runs with superuser
privileges, and we consider that it's fine.
---------
Co-authored-by: Tristan Partin <tristan.partin@databricks.com>
There are a couple of places that call `CompactionError::is_cancel` but
don't check the `::Other` variant via downcasting for root cause being
cancellation.
The only place that does it is `log_compaction_error`.
It's sad we have to do it, but, until we get around cleaning up all the
culprits,
a step forward is to unify the behavior so that all places that inspect
a
`CompactionError` for cancellation reason follow the same behavior.
Thus, this PR ...
- moves the downcasting checks against the `::Other` variant from
`log_compaction_error` into `is_cancel()` and
- enforces via type system that `.is_cancel()` is used to check whether
a CompactionError is due to cancellation (matching on the
`CompactionError::ShuttingDown` will cause a compile-time error).
I don't think there's a _serious_ case right now where matching instead
of using `is_cancel` causes problems.
The worst case I could find is the circuit breaker and
`compaction_failed`,
which don't really matter if we're shutting down the timeline anyway.
But it's unaesthetic and might cause log/alert noise down the line,
so, this PR fixes that at least.
Refs
- https://databricks.atlassian.net/browse/LKB-182
- slack conversation about this PR:
https://databricks.slack.com/archives/C09254R641L/p1751284317955159
## Problem
close LKB-199
## Summary of changes
We always return the error as 500 to the cplane if a LSN lease request
fails. This cause issues for the cplane as they don't retry on 500. This
patch correctly passes through the error and assign the error code so
that cplane can know if it is a retryable error. (TODO: look at the
cplane code and learn the retry logic).
Note that this patch does not resolve LKB-253 -- we need to handle not
found error separately in the lsn lease path, like wait until the tenant
gets attached, or return 503 so that cplane can retry.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Change the unreliable storage wrapper to fail by probability when there
are more failure attempts left.
Co-authored-by: Yecheng Yang <carlton.yang@databricks.com>
## Problem
Test `test_branch_creation_before_gc` is flaky in the internal repo.
Pageserver sometimes lags behind write LSN. When we call GC it might not
reach the LSN we try to create the branch at yet.
## Summary of changes
- Wait till flush lsn on pageserver reaches the latest LSN before
calling GC.
## Problem
GetPage bulk requests such as prefetches and vacuum can head-of-line
block foreground requests, causing increased latency.
Touches #11735.
Requires #12469.
## Summary of changes
* Use dedicated channel/client/stream pools for bulk GetPage requests.
* Use lower concurrency but higher queue depth for bulk pools.
* Make pool limits configurable.
* Require unbounded client pool for stream pool, to avoid accidental
starvation.
## Problem
Follow up of #12400
## Summary of changes
We didn't set remote_size_mb to Some when initialized so it never gets
computed :(
Also added a new API to force refresh the properties.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Due to a lag in replication, we sometimes cannot get the parent branch
definition just after completion of the Public API restore call. This
leads to the test failures.
https://databricks.atlassian.net/browse/LKB-279
## Summary of changes
The workaround is implemented. Now test retries up to 30 seconds,
waiting for the branch definition to appear.
---------
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
As discovered in https://github.com/neondatabase/neon/issues/12394,
test_multiple_subscription_branching generates skewed data distribution,
that leads to test failures when the unevenly filled last table receives
even more data.
for table t0: pub_res = (42001,), sub_res = (42001,)
for table t1: pub_res = (29001,), sub_res = (29001,)
for table t2: pub_res = (21001,), sub_res = (21001,)
for table t3: pub_res = (21001,), sub_res = (21001,)
for table t4: pub_res = (1711001,), sub_res = (1711001,)
## Summary of changes
Fix the name of the workload parameter to generate data as expected.
## Problem
The rich gRPC Pageserver client needs to split GetPage batches that
straddle multiple shards.
Touches #11735.
Requires #12462.
## Summary of changes
Adds a `GetPageSplitter` which splits `GetPageRequest` that span
multiple shards, and then reassembles the responses. Dispatches
per-shard requests in parallel.
## Problem
See [Slack
Channel](https://databricks.enterprise.slack.com/archives/C091LHU6NNB)
Dropping connection without resetting prefetch state can cause
request/response mismatch.
And lack of check response correctness in communicator_prefetch_lookupv
can cause data corruption.
## Summary of changes
1. Validate response before assignment to prefetch slot.
2. Consume prefetch requests before sending any other requests.
---------
Co-authored-by: Kosntantin Knizhnik <konstantin.knizhnik@databricks.com>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The `--timelines-onto-safekeepers` flag is very consequential in the
sense that it controls every single timeline creation. However, we don't
have any automatic insight whether enabling the option will break things
or not.
The main way things can break is by misconfigured safekeepers, say they
are marked as paused in the storcon db. The best input so far we can
obtain via manually connecting via storcon_cli and listing safekeepers,
but this is cumbersome and manual so prone to human error.
So at storcon startup, do a simulated "test creation" in which we call
`timelines_onto_safekeepers` with the configuration provided to us, and
print whether it was successful or not. No actual timeline is created,
and nothing is written into the storcon db. The heartbeat info will not
have reached us at that point yet, but that's okay, because we still
fall back to safekeepers that don't have any heartbeat.
Also print some general scheduling policy stats on initial safekeeper
load.
Part of #11670.
## Problem
For the communicator, we need a rich Pageserver gRPC client.
Touches #11735.
Requires #12434.
## Summary of changes
This patch adds an initial rich Pageserver gRPC client. It supports:
* Sharded tenants across multiple Pageservers.
* Pooling of connections, clients, and streams for efficient resource
use.
* Concurrent use by many callers.
* Internal handling of GetPage bidirectional streams, with pipelining
and error handling.
* Automatic retries.
* Observability.
The client is still under development. In particular, it needs GetPage
batch splitting, shard map updates, and performance optimization. This
will be addressed in follow-up PRs.
The only differentiated handling of it is for `is_critical`, which in
turn is a `matches!()` on several variants of the `enum
CollectKeyspaceError`
which is the value contained insided
`CompactionError::CollectKeyspaceError`.
This PR introduces a new error for `repartition()`, allowing its
immediate
callers to inspect it like `is_critical` did.
A drive-by fix is more precise classification of WaitLsnError::BadState
when mapping to `tonic::Status`.
refs
- https://databricks.atlassian.net/browse/LKB-182
## Problem
close LKB-209
## Summary of changes
- We should not allow lease creation below the applied gc cutoff.
- Also removed the condition for `AttachedSingle`. We should always
check the lease against the gc cutoff in all attach modes.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We only trim the senders if we tried to send a message to them and
discovered that the channel is closed. This is problematic if the
pageserver keeps connecting while there's nothing to send back for the
shard. In this scenario we never trim down the senders list and can
panic due to the u8 limit.
## Summary of Changes
Trim down the dead senders before adding a new one.
Closes LKB-178
## Problem
We lost capability to explicitly disable the global eviction task (for
testing).
## Summary of changes
Add an `enabled` flag to `DiskUsageEvictionTaskConfig` to indicate
whether we should run the eviction job or not.
## Problem
The communicator will need gRPC channel/client/stream pools for
efficient reuse across many backends.
Touches #11735.
Requires #12396.
## Summary of changes
Adds three nested resource pools:
* `ChannelPool` for gRPC channels (i.e. TCP connections).
* `ClientPool` for gRPC clients (i.e. `page_api::Client`). Acquires
channels from `ChannelPool`.
* `StreamPool` for gRPC GetPage streams. Acquires clients from
`ClientPool`.
These are minimal functional implementations that will need further
improvements and performance optimization. However, the overall
structure is expected to be roughly final, so reviews should focus on
that.
The pools are not yet in use, but will form the foundation of a rich
gRPC Pageserver client used by the communicator (see #12462). This PR
also adds the initial crate scaffolding for that client.
See doc comments for details.
# TLDR
All changes are no-op except
1. publishing additional metrics.
2. problem VI
## Problem I
It has come to my attention that the Neon Storage Controller doesn't
correctly update its "observed" state of tenants previously associated
with PSs that has come back up after a local data loss. It would still
think that the old tenants are still attached to page servers and won't
ask more questions. The pageserver has enough information from the
reattach request/response to tell that something is wrong, but it
doesn't do anything about it either. We need to detect this situation in
production while I work on a fix.
(I think there is just some misunderstanding about how Neon manages
their pageserver deployments which got me confused about all the
invariants.)
## Summary of changes I
Added a `pageserver_local_data_loss_suspected` gauge metric that will be
set to 1 if we detect a problematic situation from the reattch response.
The problematic situation is when the PS doesn't have any local tenants
but received a reattach response containing tenants.
We can set up an alert using this metric. The alert should be raised
whenever this metric reports non-zero number.
Also added a HTTP PUT
`http://pageserver/hadron-internal/reset_alert_gauges` API on the
pageserver that can be used to reset the gauge and the alert once we
manually rectify the situation (by restarting the HCC).
## Problem II
Azure upload is 3x slower than AWS. -> 3x slower ingestion.
The reason for the slower upload is that Azure upload in page server is
much slower => higher flush latency => higher disk consistent LSN =>
higher back pressure.
## Summary of changes II
Use Azure put_block API to uploads a 1 GB layer file in 8 blocks in
parallel.
I set the put_block block size to be 128 MB by default in azure config.
To minimize neon changes, upload function passes the layer file path to
the azure upload code through the storage metadata. This allows the
azure put block to use FileChunkStreamRead to stream read from one
partition in the file instead of loading all file data in memory and
split it into 8 128 MB chunks.
## How is this tested? II
1. rust test_real_azure tests the put_block change.
3. I deployed the change in azure dev and saw flush latency reduces from
~30 seconds to 10 seconds.
4. I also did a bunch of stress test using sqlsmith and 100 GB TPCDS
runs.
## Problem III
Currently Neon limits the compaction tasks as 3/4 * CPU cores. This
limits the overall compaction throughput and it can easily cause
head-of-the-line blocking problems when a few large tenants are
compacting.
## Summary of changes III
This PR increases the limit of compaction tasks as `BG_TASKS_PER_THREAD`
(default 4) * CPU cores. Note that `CONCURRENT_BACKGROUND_TASKS` also
limits some other tasks `logical_size_calculation` and `layer eviction`
. But compaction should be the most frequent and time-consuming task.
## Summary of changes IV
This PR adds the following PageServer metrics:
1. `pageserver_disk_usage_based_eviction_evicted_bytes_total`: captures
the total amount of bytes evicted. It's more straightforward to see the
bytes directly instead of layers.
2. `pageserver_active_storage_operations_count`: captures the active
storage operation, e.g., flush, L0 compaction, image creation etc. It's
useful to visualize these active operations to get a better idea of what
PageServers are spending cycles on in the background.
## Summary of changes V
When investigating data corruptions, it's useful to search the base
image and all WAL records of a page up to an LSN, i.e., a breakdown of
GetPage@LSN request. This PR implements this functionality with two
tools:
1. Extended `pagectl` with a new command to search the layer files for a
given key up to a given LSN from the `index_part.json` file. The output
can be used to download the files from S3 and then search the file
contents using the second tool.
Example usage:
```
cargo run --bin pagectl index-part search --tenant-id 09b99ea3239bbb3b2d883a59f087659d --timeline-id 7bedf4a6995baff7c0421ff9aebbcdab --path ~/Downloads/corruption/index_part.json-0000000c-formatted --key 000000067F000080140000802100000D61BD --lsn 70C/BF3D61D8
```
Example output:
```
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F0000801400008028000002FEFF__000007089F0B5381-0000070C7679EEB9-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000000000000000000000000000000000-000000067F0000801400008028000002F3F1__000006DD95B6F609-000006E2BA14C369-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F000080140000802100001B0973__000006D33429F539-000006DD95B6F609-0000000c
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000164D81__000006C6343B2D31-000006D33429F539-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F0000801400008021000017687B__000006BA344FA7F1-000006C6343B2D31-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000165BAB__000006AD34613D19-000006BA344FA7F1-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F0000801400000B180000000002-000000067F00008014000080210000137A39__0000069F34773461-000006AD34613D19-0000000b
tenants/09b99ea3239bbb3b2d883a59f087659d-0304/timelines/7bedf4a6995baff7c0421ff9aebbcdab/000000067F000080140000802100000D4000-000000067F000080140000802100000F0000__0000069F34773460-0000000b
```
2. Added a unit test to search the layer file contents. It's not
implemented part of `pagectl` because it depends on some test harness
code, which can only be used by unit tests.
Example usage:
```
cargo test --package pageserver --lib -- tenant::debug::test_search_key --exact --nocapture -- --tenant-id 09b99ea3239bbb3b2d883a59f087659d --timeline-id 7bedf4a6995baff7c0421ff9aebbcdab --data-dir /Users/chen.luo/Downloads/corruption --key 000000067F000080140000802100000D61BD --lsn 70C/BF3D61D8
```
Example output:
```
# omitted image for brievity
delta: 69F/769D8180: will_init: false, "OgAAALGkuwXwYp12nwYAAECGAAASIqLHAAAAAH8GAAAUgAAAIYAAAL1hDQD/DLGkuwUDAAAAEAAWAA=="
delta: 69F/769CB6D8: will_init: false, "PQAAALGkuwXotZx2nwYAABAJAAAFk7tpACAGAH8GAAAUgAAAIYAAAL1hDQD/CQUAEAASALExuwUBAAAAAA=="
```
## Problem VI
Currently when page service resolves shards from page numbers, it
doesn't fully support the case that the shard could be split in the
middle. This will lead to query failures during the tenant split for
either commit or abort cases (it's mostly for abort).
## Summary of changes VI
This PR adds retry logic in `Cache::get()` to deal with shard resolution
errors more gracefully. Specifically, it'll clear the cache and retry,
instead of failing the query immediately. It also reduces the internal
timeout to make retries faster.
The PR also fixes a very obvious bug in
`TenantManager::resolve_attached_shard` where the code tries to cache
the computed the shard number, but forgot to recompute when the shard
count is different.
---------
Co-authored-by: William Huang <william.huang@databricks.com>
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Vlad Lazar <vlad.lazar@databricks.com>
Co-authored-by: Vlad Lazar <vlad@neon.tech>
This patch tightens up `page_api::Client`. It's mostly superficial
changes, but also adds a new constructor that takes an existing gRPC
channel, for use with the communicator connection pool.
## Problem
Some feature flags are used heavily on the critical path and we want the
"get feature flag" operation as cheap as possible.
## Summary of changes
Add a `test_remote_size_flag` as an example of such flags. In the
future, we can use macro to generate all those fields. The flag is
updated in the housekeeping loop. The retrieval of the flag is simply
reading an atomic flag.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The goal of this code was to test out if resetting the broker
subscription helps alleviate the issues we've been seeing in staging.
Looks like it did the trick. However, the original version was too
eager.
## Summary of Changes
Only reset the stream when:
* we are waiting for WAL
* there's no connection candidates lined up
* we're not already connected to a safekeeper
The only call stack that can emit the `::AlreadyRunning` variant is
```
-> iteration_inner
-> iteration
-> compaction_iteration
-> compaction_loop
-> start_background_loops
```
And on that call stack, the only differentiated handling of it is its
invocations of
`log_compaction_error -> CompactionError::is_cancel()`, which returns
`true` for
`::AlreadyRunning`.
I think the condition of `AlreadyRunning` is severe; it really shouldn't
happen.
So, this PR starts treating it as something that is to be logged at
`ERROR` / `WARN`
level, depending on the `degrate_to_warning` argument to
`log_compaction_error`.
refs
- https://databricks.atlassian.net/browse/LKB-182
## Problem
Grafana Alloy in cluster mode seems to send duplicate "seconds" scrape
URL parameters
when one of its instances is disrupted.
## Summary of changes
Temporarily accept duplicate parameters as long as their value is
identical.
Looks can be deceiving: the match blocks in
`maybe_trip_compaction_breaker`
and at the end of `compact_with_options` seem like differentiated error
handling, but in reality, these branches are unreachable at runtime
because the only source of `CompactionError::Offload` within the
compaction code is at the end of `Tenant::compaction_iteration`.
We can simply map offload cancellation to CompactionError::Cancelled and
all other offload errors to ::Other, since there's no differentiated
handling for them in the compaction code.
Also, the OffloadError::RemoteStorage variant has no differentiated
handling, but was wrapping the remote storage anyhow::Error in a
`anyhow(thiserror(anyhow))` sandwich. This PR removes that variant,
mapping all RemoteStorage errors to `OffloadError::Other`.
Thereby, the sandwich is gone and we will get a proper anyhow backtrace
to the remote storage error location if when we debug-print the
OffloadError (or the CompactionError if we map it to that).
refs
- https://databricks.atlassian.net/browse/LKB-182
- the observation that there's no need for differentiated handling of
CompactionError::Offload was made in
https://databricks.slack.com/archives/C09254R641L/p1751286453930269?thread_ts=1751284317.955159&cid=C09254R641L
Before this PR, macOS builds would get clippy warning
```
warning: `tokio_epoll_uring::thread_local_system` does not refer to an existing function
```
The reason is that the `thread_local_system` function is only defined on
Linux.
Add `allow-invalid = true` to make macOS clippy pass, and manually test
that on Linux builds, clippy still fails when we use it.
refs
- https://databricks.slack.com/archives/C09254R641L/p1751917655527099
Co-authored-by: Christian Schwarz <Christian Schwarz>
## Problem
Deletion process does not calculate preferred nodes correctly - it
doesn't consider current tenant-shard layout among all pageservers.
## Summary of changes
- Added a schedule context calculation for node deletion
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
The introduction of the default lease deadline feature 9 months ago made
it so
that after PS restart, `.timeline_gc()` calls in Python tests are no-ops
for 10 minute after pageserver startup: the `gc_iteration()` bails with
`Skipping GC because lsn lease deadline is not reached`.
I did some impact analysis in the following PR. About 30 Python tests
are affected:
- https://github.com/neondatabase/neon/pull/12411
Rust tests that don't explicitly enable periodic GC or invoke GC
manually
are unaffected because we disable periodic GC by default in
the `TenantHarness`'s tenant config.
Two tests explicitly did `start_paused=true` + `tokio::time::advance()`,
but it would add cognitive and code bloat to each existing and future
test case that uses TenantHarness if we took that route.
So, this PR sets the default lease deadline feature in both Python
and Rust tests to zero by default. Tests that test the feature were
thus identified by failing the test:
- Python test `test_readonly_node_gc` + `test_lsn_lease_size`
- Rust test `test_lsn_lease`.
To accomplish the above, I changed the code that computes the initial
lease
deadline to respect the pageserver.toml's default tenant config, which
it didn't before (and I would consider a bug). The Python test harness
and the Rust TenantHarness test harness then simply set the default
tenant
config field to zero.
Drive-by:
- `test_lsn_lease_size` was writing a lot of data unnecessarily; reduce
the amount and speed up the test
refs
- PR that introduced default lease deadline:
https://github.com/neondatabase/neon/pull/9055/files
- fixes https://databricks.atlassian.net/browse/LKB-92
---------
Co-authored-by: Christian Schwarz <Christian Schwarz>
## Problem
Extension tests were previously run sequentially, resulting in
unnecessary wait time and underutilization of available CPU cores.
## Summary of changes
Tests are now executed in a customizable number of parallel threads
using separate database branches. This reduces overall test time by
approximately 50% (e.g., on my laptop, parallel test lasts 173s, while
sequential one lasts 340s) and increases the load on the pageserver,
providing better test coverage.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: Alexey Masterov <alexey.masterov@databricks.com>
## Problem
Pageserver now writes errors in the log during the safekeeper migration.
Some errors are added to allowed errors, but "timeline not found in
global map" is not.
- Will be properly fixed in
https://github.com/neondatabase/neon/issues/12191
## Summary of changes
Add "timeline not found in global map" error in a list of allowed errors
in `test_safekeeper_migration_simple`
## Problem
Test is flaky due to the following warning in the logs:
```
Keeping extra secondaries: can't determine which of [NodeId(1), NodeId(2)] to remove (some nodes offline?)
```
Some nodes being offline is expected behavior in this test.
## Summary of changes
- Added `Keeping extra secondaries` to the list of allowed errors
- Improved logging for better debugging experience
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## Problem
The endpoint filter cache is still unused because it's not yet reliable
enough to be used. It only consumes a lot of memory.
## Summary of changes
Remove the code. Needs a new design.
neondatabase/cloud#30634
See #11992 and #11961 for some examples of usecases.
This introduces a JSON serialization lib, designed for more flexibility
than serde_json offers.
## Dynamic construction
Sometimes you have dynamic values you want to serialize, that are not
already in a serde-aware model like a struct or a Vec etc. To achieve
this with serde, you need to implement a lot of different traits on a
lot of different new-types. Because of this, it's often easier to
give-in and pull all the data into a serde-aware model
(serde_json::Value or some intermediate struct), but that is often not
very efficient.
This crate allows full control over the JSON encoding without needing to
implement any extra traits. Just call the relevant functions, and it
will guarantee a correctly encoded JSON value.
## Async construction
Similar to the above, sometimes the values arrive asynchronously. Often
collecting those values in memory is more expensive than writing them as
JSON, since the overheads of `Vec` and `String` is much higher, however
there are exceptions.
Serializing to JSON all in one go is also more CPU intensive and can
cause lag spikes, whereas serializing values incrementally spreads out
the CPU load and reduces lag.
## Problem
We don't log gRPC request errors on the server.
Touches #11728.
## Summary of changes
Automatically log non-OK gRPC response statuses in the observability
middleware, and add corresponding logging for the `get_pages` stream.
Also adds the peer address and gRPC method to the gRPC tracing span.
Example output:
```
2025-07-02T20:18:16.813718Z WARN grpc:pageservice{peer=127.0.0.1:56698 method=CheckRelExists tenant_id=c7b45faa1924b1958f05c5fdee8b0d04 timeline_id=4a36ee64fd2f97781b9dcc2c3cddd51b shard_id=0000}: request failed with NotFound: Tenant c7b45faa1924b1958f05c5fdee8b0d04 not found
```
## Problem
Names are not consistent between safekeeper migration RFC and the actual
implementation.
It's not used anywhere in production yet, so it's safe to rename. We
don't need to worry about backward compatibility.
- Follow up on https://github.com/neondatabase/neon/pull/12432
## Summary of changes
- rename term -> last_log_term in TimelineMembershipSwitchResponse
- add missing fields to TimelineMembershipSwitchResponse in python
## Problem
The safekeeper migration code/logic slightly diverges from the initial
RFC. This PR aims to address these differences.
- Part of https://github.com/neondatabase/neon/issues/12192
## Summary of changes
- Adjust the RFC to reflect that we implemented the safekeeper
reconciler with in-memory queue.
- Add `sk_set_notified_generation` field to the `timelines` table in the
RFC to address the "finish migration atomically" problem.
- Describe how we are going to make the timeline migration handler fully
retriable with in-memory reconciler queue.
- Unify type/field/method names in the code and RFC.
- Fix typos
This doesn't do anything interesting yet, but demonstrates linking Rust
code to the neon Postgres extension, so that we can review and test
drive just the build process changes independently.
Mostly a revert of https://github.com/neondatabase/neon/pull/11851 and
https://github.com/neondatabase/neon/pull/12330 .
Christian suggested reverting his PR to fix the issue
https://github.com/neondatabase/neon/issues/12369 .
Alternatives considered:
1. I have originally wanted to introduce cancellation tokens to
`RequestContext`, but in the end I gave up on them because I didn't find
a select-free way of preventing
`test_layer_download_cancelled_by_config_location` from hanging.
Namely if I put a select around the `get_or_maybe_download` invocation
in `get_values_reconstruct_data`, it wouldn't hang, but if I put it
around the `download_init_and_wait` invocation in
`get_or_maybe_download`, the test would still hang. Not sure why, even
though I made the attached child function of the `RequestContext` create
a child token.
2. Introduction of a `download_cancel` cancellation token as a child of
a timeline token, putting it into `RemoteTimelineClient` together with
the main token, and then putting it into the whole
`RemoteTimelineClient` read path.
3. Greater refactorings, like to make cancellation tokens follow a DAG
structure so you can have tokens cancelled either by say timeline
shutting down or a request ending. It doesn't just represent an effort
that we don't have the engineering budget for, it also causes
interesting questions like what to do about batching (do you cancel the
entire request if only some requests get cancelled?).
We might see a reemergence of
https://github.com/neondatabase/neon/issues/11762, but given that we
have https://github.com/neondatabase/neon/pull/11853 and
https://github.com/neondatabase/neon/pull/12376 now, it is possible that
it will not come back. Looking at some code, it might actually fix the
locations where the error pops up. Let's see.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
- Add ComputeSpec flag `offload_lfc_interval_seconds` controlling
whether LFC should be offloaded to endpoint storage. Default value
(None) means "don't offload".
- Add glue code around it for `neon_local` and integration tests.
- Add `autoprewarm` mode for `test_lfc_prewarm` testing
`offload_lfc_interval_seconds` and `autoprewarm` flags in conjunction.
- Rename `compute_ctl_lfc_prewarm_requests_total` and
`compute_ctl_lfc_offload_requests_total` to
`compute_ctl_lfc_prewarms_total`
and `compute_ctl_lfc_offloads_total` to reflect we count prewarms and
offloads, not `compute_ctl` requests of those.
Don't count request in metrics if there is a prewarm/offload already
ongoing.
https://github.com/neondatabase/cloud/issues/19011
Resolves: https://github.com/neondatabase/cloud/issues/30770
Don't build walproposer-lib as a separate job. It only takes a few
seconds, after you have built all its dependencies.
Don't cache the Neon Pg extensions in the per-postgres-version caches.
This is in preparation for the communicator project, which will
introduce Rust parts to the Neon Pg extension, which complicates the
build process. With that, the 'make neon-pg-ext' step requires some of
the Rust bits to be built already, or it will build them on the spot,
which in turn requires all the Rust sources to be present, and we don't
want to repeat that part for each Postgres version anyway. To prepare
for that, rely on "make all" to build the neon extension and the rust
bits in the correct order instead. Building the neon extension doesn't
currently take very long anyway after you have built Postgres itself, so
you don't gain much by caching it. See
https://github.com/neondatabase/neon/pull/12266.
Add an explicit "rustup update" step to update the toolchain. It's not
strictly necessary right now, because currently "make all" will only
invoke "cargo build" once and the race condition described in the
comment doesn't happen. But prepare for the future.
To further simplify the build, get rid of the separate 'build-postgres'
jobs too, and just build Postgres as a step in the main job. That makes
the overall workflow run longer, because we no longer build all the
postgres versions in parallel (although you still get intra-runner
parallelism thanks to `make -j`), but that's acceptable. In the
cache-hit case, it might even be a little faster because there is less
overhead from launching jobs, and in the cache-miss case, it's maybe
5-10 minutes slower altogether.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
The current deletion operation is synchronous and blocking, which is
unsuitable for potentially long-running tasks like. In such cases, the
standard HTTP request-response pattern is not a good fit.
## Summary of Changes
- Added new `storcon_cli` commands: `NodeStartDelete` and
`NodeCancelDelete` to initiate and cancel deletion asynchronously.
- Added corresponding `storcon` HTTP handlers to support the new
start/cancel deletion flow.
- Introduced a new type of background operation: `Delete`, to track and
manage the deletion process outside the request lifecycle.
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## Problem
I suspect that the pageservers get stuck on receiving broker updates.
## Summary of changes
This is a an opportunistic (staging only) patch that resets the
susbscription
stream if it's been idle for a while. This won't go to prod in this
form.
I'll revert or update it before Friday.
## Problem
DEBUG_LOCAL_COMPARE mode allows to detect data corruption.
But it requires rebuild of neon extension (and so requires special
image) and significantly slowdown execution because always fetch pages
from page server.
## Summary of changes
Introduce new GUC `neon.debug_compare_local`, accepting the following
values: " none", "prefetch", "lfc", "all" (by default it is definitely
disabled).
In mode less than "all", neon SMGR will not fetch page from PS if it is
found in local caches.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
The background installed extensions worker relied on `interval.tick()`
to go to sleep for a period of time. This can lead to bugs due to the
interval being updated at the end of the loop as the first tick is
[instantaneous](https://docs.rs/tokio/latest/tokio/time/struct.Interval.html#method.tick).
## Summary of changes
Changed it to a `tokio::time::sleep` to prevent this issue. Now it puts
the thread to sleep and only wakes up after the specified duration
## Problem
Better investigate memory usage during backpressure
## Summary of changes
Print open layer size if backpressure is activated
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Ancestor detach from a previously detached parent when there were no
writes panics since it tries to upload the tombstone layer twice.
## Summary of Changes
If we're gonna copy the tombstone from the ancestor, don't bother
creating it.
Fixes https://github.com/neondatabase/neon/issues/12458
When deploying new safekeepers, we don't immediately want to send
traffic to them. Maybe they are not ready yet by the time the deploy
script is registering them with the storage controller.
For pageservers, the storcon solves the problem by not scheduling stuff
to them unless there has been a positive heartbeat response. We can't do
the same for safekeepers though, otherwise a single down safekeeper
would mean we can't create new timelines in smaller regions where there
is only three safekeepers in total.
So far we have created safekeepers as `pause` but this adds a manual
step to safekeeper deployment which is prone to oversight. We want
things to be automatted. So we introduce a new state `activating` that
acts just like `pause`, except that we automatically transition the
policy to `active` once we get a positive heartbeat from the safekeeper.
For `pause`, we always keep the safekeeper paused.
## Problem
Currently, if `storcon` (storage controller) reconciliations repeatedly
fail, the system will indefinitely freeze optimizations. This can result
in optimization starvation for several days until the reconciliation
issues are manually resolved. To mitigate this, we should detect
persistently failing reconciliations and exclude them from influencing
the optimization decision.
## Summary of Changes
- A tenant shard reconciliation is now considered "keep-failing" if it
fails 5 consecutive times. These failures are excluded from the
optimization readiness check.
- Added a new metric: `storage_controller_keep_failing_reconciles` to
monitor such cases.
- Added a warning log message when a reconciliation is marked as
"keep-failing".
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## TLDR
This PR is a no-op. The changes are disabled by default.
## Problem
I. Currently we don't have a way to detect disk I/O failures from WAL
operations.
II.
We observe that the offloader fails to upload a segment due to race
conditions on XLOG SWITCH and PG start streaming WALs. wal_backup task
continously failing to upload a full segment while the segment remains
partial on the disk.
The consequence is that commit_lsn for all SKs move forward but
backup_lsn stays the same. Then, all SKs run out of disk space.
III.
We have discovered SK bugs where the WAL offload owner cannot keep up
with WAL backup/upload to S3, which results in an unbounded accumulation
of WAL segment files on the Safekeeper's disk until the disk becomes
full. This is a somewhat dangerous operation that is hard to recover
from because the Safekeeper cannot write its control files when it is
out of disk space. There are actually 2 problems here:
1. A single problematic timeline can take over the entire disk for the
SK
2. Once out of disk, it's difficult to recover SK
IV.
Neon reports certain storage errors as "critical" errors using a marco,
which will increment a counter/metric that can be used to raise alerts.
However, this metric isn't sliced by tenant and/or timeline today. We
need the tenant/timeline dimension to better respond to incidents and
for blast radius analysis.
## Summary of changes
I.
The PR adds a `safekeeper_wal_disk_io_errors ` which is incremented when
SK fails to create or flush WALs.
II.
To mitigate this issue, we will re-elect a new offloader if the current
offloader is lagging behind too much.
Each SK makes the decision locally but they are aware of each other's
commit and backup lsns.
The new algorithm is
- determine_offloader will pick a SK. say SK-1.
- Each SK checks
-- if commit_lsn - back_lsn > threshold,
-- -- remove SK-1 from the candidate and call determine_offloader again.
SK-1 will step down and all SKs will elect the same leader again.
After the backup is caught up, the leader will become SK-1 again.
This also helps when SK-1 is slow to backup.
I'll set the reelect backup lag to 4 GB later. Setting to 128 MB in dev
to trigger the code more frequently.
III.
This change addresses problem no. 1 by having the Safekeeper perform a
timeline disk utilization check check when processing WAL proposal
messages from Postgres/compute. The Safekeeper now rejects the WAL
proposal message, effectively stops writing more WAL for the timeline to
disk, if the existing WAL files for the timeline on the SK disk exceeds
a certain size (the default threshold is 100GB). The disk utilization is
calculated based on a `last_removed_segno` variable tracked by the
background task removing WAL files, which produces an accurate and
conservative estimate (>= than actual disk usage) of the actual disk
usage.
IV.
* Add a new metric `hadron_critical_storage_event_count` that has the
`tenant_shard_id` and `timeline_id` as dimensions.
* Modified the `crtitical!` marco to include tenant_id and timeline_id
as additional arguments and adapted existing call sites to populate the
tenant shard and timeline ID fields. The `critical!` marco invocation
now increments the `hadron_critical_storage_event_count` with the extra
dimensions. (In SK there isn't the notion of a tenant-shard, so just the
tenant ID is recorded in lieu of tenant shard ID.)
I considered adding a separate marco to avoid merge conflicts, but I
think in this case (detecting critical errors) conflicts are probably
more desirable so that we can be aware whenever Neon adds another
`critical!` invocation in their code.
---------
Co-authored-by: Chen Luo <chen.luo@databricks.com>
Co-authored-by: Haoyu Huang <haoyu.huang@databricks.com>
Co-authored-by: William Huang <william.huang@databricks.com>
## Problem
integrating subzero requires a bit of refactoring. To make the
integration PR a bit more manageable, the refactoring is done in this
separate PR.
## Summary of changes
* move common types/functions used in sql_over_http to errors.rs and
http_util.rs
* add the "Local" auth backend to proxy (similar to local_proxy), useful
in local testing
* change the Connect and Send type for the http client to allow for
custom body when making post requests to local_proxy from the proxy
---------
Co-authored-by: Ruslan Talpa <ruslan.talpa@databricks.com>
## Problem
`keep_connection` does not exit, so it was never setting
`credentials_refreshed`.
## Summary of changes
Set `credentials_refreshed` to true when we first establish a
connection, and after we re-authenticate the connection.
## Problem
#12450
## Summary of changes
Instead of `#[arg(default_value_t = typed_default_value)]`, we use
`#[arg(default_value = "str that deserializes into the value")]`,
because apparently you can't convince clap to _not_ deserialize from the
Display implementation of an imported enum.
Health checks for pg-sni-router open a TCP connection and immediately
close it again. This is noisy. We will filter out any EOF errors on the
first message.
"acquired permit" debug log is incorrect since it logs when we timedout
as well. This fixes the debug log.
## Problem
When local proxy is configured with TLS, the certificate does not match
the endpoint string. This currently returns an error.
## Summary of changes
I don't think this code is necessary anymore, taking the prefix from the
hostname is good enough (and is equivalent to what `endpoint_sni` was
doing) and we ignore checking the domain suffix.
## Problem
Neon currently implements several features that guarantee high uptime of
compute nodes:
1. Storage high-availability (HA), i.e. each tenant shard has a
secondary pageserver location, so we can quickly switch over compute to
it in case of primary pageserver failure.
2. Fast compute provisioning, i.e. we have a fleet of pre-created empty
computes, that are ready to serve workload, so restarting unresponsive
compute is very fast.
3. Preemptive NeonVM compute provisioning in case of k8s node
unavailability.
This helps us to be well-within the uptime SLO of 99.95% most of the
time. Problems begin when we go up to multi-TB workloads and 32-64 CU
computes. During restart, compute looses all caches: LFC, shared
buffers, file system cache. Depending on the workload, it can take a lot
of time to warm up the caches, so that performance could be degraded and
might be even unacceptable for certain workloads. The latter means that
although current approach works well for small to
medium workloads, we still have to do some additional work to avoid
performance degradation after restart of large instances.
[Rendered
version](https://github.com/neondatabase/neon/blob/alexk/pg-prewarm-rfc/docs/rfcs/2025-03-17-compute-prewarm.md)
Part of https://github.com/neondatabase/cloud/issues/19011
## Problem
The billing team wants to change the billing events pipeline and use a
common events format in S3 buckets across different event producers.
## Summary of changes
Change the events storage format for billing events from JSON to NDJSON.
Also partition files by hours, rather than days.
Resolves: https://github.com/neondatabase/cloud/issues/29995
We would like to move towards an arena system for JSON encoding the
responses. This change pushes an "out" parameter into the pg-test to
json routines to make swapping in an arena system easier in the future.
(see #11992)
This additionally removes the redundant `column: &[Type]` argument, as
well as rewriting the pg_array parser.
---
I rewrote the pg_array parser since while making these changes I found
it hard to reason about. I went back to the specification and rewrote it
from scratch. There's 4 separate routines:
1. pg_array_parse - checks for any prelude (multidimensional array
ranges)
2. pg_array_parse_inner - only deals with the arrays themselves
3. pg_array_parse_item - parses a single item from the array, this might
be quoted, unquoted, or another nested array.
4. pg_array_parse_quoted - parses a quoted string, following the
relevant string escaping rules.
Don't print errors like:
```
Compaction failed 1 times, retrying in 2s: Failed to offload timeline: Unexpected offload error: Timeline deletion is already in progress
```
Print it at info log level instead.
https://github.com/neondatabase/cloud/issues/30666
## Problem
https://github.com/neondatabase/neon/pull/11712 changed how computes are
started in the test: the lsn is specified, making them read-only static
replicas. Lsn is `last_record_lsn` from pageserver. It works fine with
read-only branches (because their `last_record_lsn` is equal to
`start_lsn` and always valid). But with writable timelines, the
`last_record_lsn` on the pageserver might be stale.
Particularly in this test, after the `detach_branch` operation, the
tenant is reset on the pagesever. It leads to `last_record_lsn` going
back to `disk_consistent_lsn`, so basically rolling back some recent
writes.
If we start a primary compute, it will start at safekeepers' commit Lsn,
which is the correct one , and will wait till pageserver catches up with
this Lsn after reset.
- Closes: https://github.com/neondatabase/neon/issues/12365
## Summary of changes
- Start `primary` compute for writable timelines.
## Problem
Part of #11813
## Summary of changes
* Compute tenant remote size in the housekeeping loop.
* Add a new `TenantFeatureResolver` struct to cache the tenant-specific
properties.
* Evaluate feature flag based on the remote size.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
close https://github.com/neondatabase/neon/issues/11528
## Summary of changes
Gives us better observability of compaction progress.
- Image creation: num of partition processed / total partition
- Gc-compaction: index of the in the queue / total items for a full
compaction
- Shard ancestor compaction: layers to rewrite / total layers
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
L0 compaction currently holds the read lock for a long region while it
doesn't need to.
## Summary of changes
This patch reduces the one long contention region into 2 short ones:
gather the layers to compact at the beginning, and several short read
locks when querying the image coverage.
Co-Authored-By: Chen Luo
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
This PR works on adding dynamic masking support for `anon` v2. It
currently only supports static masking.
## Summary of changes
Added a security definer function that sets the dynamic masking guc to
`true` with superuser permissions.
Added a security definer function that adds `anon` to
`session_preload_libraries` if it's not already present.
Related to: https://github.com/neondatabase/cloud/issues/20456
## Problem
Currently we do not have metrics for autovacuum.
## Summary of changes
Added a metric that extracts the top 5 DBs with oldest mxid and frozen
xid. Tables that were vacuumed recently should have younger value (or
younger age).
Related Issue: https://github.com/neondatabase/cloud/issues/27296
## Problem
#8843
User initiated sql queries are being classified as "postgres" errors,
whereas they're really user errors.
## Summary of changes
Classify user-initiated postgres errors as user errors if they are
related to a sql query that we ran on their behalf. Do not log those
errors.
Add support to transport syslogs over TLS. Since TLS params essentially
require passing host and port separately, add a boolean flag to the
configuration template and also use the same `action` format for
plaintext logs. This allows seamless transition.
The plaintext host:port is picked from `AUDIT_LOGGING_ENDPOINT` (as
earlier) and from `AUDIT_LOGGING_TLS_ENDPOINT`. The TLS host:port is
used when defined and non-empty.
`remote_endpoint` is split separately to hostname and port as required
by `omfwd` module.
Also the address parsing and config content generation are split to more
testable functions with basic tests added.
## Problem
We persist safekeeper host/port in the storcon DB after
https://github.com/neondatabase/neon/pull/11712, so the storcon fails to
ping safekeepers in the compatibility tests, where we start the cluster
from the snapshot.
PR also adds some small code improvements related to the test failure.
- Closes: https://github.com/neondatabase/neon/issues/12339
## Summary of changes
- Update safekeeper ports in the storcon DB when starting the neon from
the dir (snapshot)
- Fail the response on all not-success codes (e.g. 3xx). Should not
happen, but just to be more safe.
- Add `neon_previous/` to .gitignore to make it easier to run compat
tests.
- Add missing EXPORT to the instruction for running compat tests
## Problem
Previously, the background worker that collects the list of installed
extensions across DBs had a timeout set to 1 hour. This cause a problem
with computes that had a `suspend_timeout` > 1 hour as this collection
was treated as activity, preventing compute shutdown.
Issue: https://github.com/neondatabase/cloud/issues/30147
## Summary of changes
Passing the `suspend_timeout` as part of the `ComputeSpec` so that any
updates to this are taken into account by the background worker and
updates its collection interval.
If a hardlink operation inside `detach_ancestor` fails due to the layer
already existing, we delete the layer to make sure the source is one we
know about, and then retry.
But we deleted the wrong file, namely, the one we wanted to use as the
source of the hardlink. As a result, the follow up hard link operation
failed. Our PR corrects this mistake.
## Problem
We don't notify cplane about safekeeper membership change yet. Without
the notification the compute needs to know all the safekeepers on the
cluster to be able to speak to them. Change notifications will allow to
avoid it.
- Closes: https://github.com/neondatabase/neon/issues/12188
## Summary of changes
- Implement `notify_safekeepers` method in `ComputeHook`
- Notify cplane about safekeepers in `safekeeper_migrate` handler.
- Update the test to make sure notifications work.
## Out of scope
- There is `cplane_notified_generation` field in `timelines` table in
strocon's database. It's not needed now, so it's not updated in the PR.
Probably we can remove it.
- e2e tests to make sure it works with a production cplane
## Problem
The gRPC API does not provide LSN leases.
## Summary of changes
* Add LSN lease support to the gRPC API.
* Use gRPC LSN leases for static computes with `grpc://` connstrings.
* Move `PageserverProtocol` into the `compute_api::spec` module and
reuse it.
## Problem
Location config changes can currently result in changes to the shard
identity. Such changes will cause data corruption, as seen with #12217.
Resolves#12227.
Requires #12377.
## Summary of changes
Assert that the shard identity does not change on location config
updates and on (re)attach.
This is currently asserted with `critical!`, in case it misfires in
production. Later, we should reject such requests with an error and turn
this into a proper assertion.
Implicit mapping to an `anyhow::Error` when we do `?` is discouraged
because tooling to find those places isn't great.
As a drive-by, also make SplitImageLayerWriter::new infallible and sync.
I think we should also make ImageLayerWriter::new completely lazy,
then `BatchLayerWriter:new` infallible and async.
Reverts neondatabase/neon#11663 and
https://github.com/neondatabase/neon/pull/11265/
Step Security is not yet approved by Databricks team, in order to
prevent issues during Github org migration, I'll revert this PR to use
the previous action instead of Step Security maintained action.
## Problem
Similarly to #12217, the following endpoints may result in a stripe size
mismatch between the storage controller and Pageserver if an unsharded
tenant has a different stripe size set than the default. This can lead
to data corruption if the tenant is later manually split without
specifying an explicit stripe size, since the storage controller and
Pageserver will apply different defaults. This commonly happens with
tenants that were created before the default stripe size was changed
from 32k to 2k.
* `PUT /v1/tenant/config`
* `PATCH /v1/tenant/config`
These endpoints are no longer in regular production use (they were used
when cplane still managed Pageserver directly), but can still be called
manually or by tests.
## Summary of changes
Retain the current shard parameters when updating the location config in
`PUT | PATCH /v1/tenant/config`.
Also opportunistically derive `Copy` for `ShardParameters`.
## Problem
Some of the design decisions in PR #12256 were influenced by the
requirements of consistency tests. These decisions introduced
intermediate logic that is no longer needed and should be cleaned up.
## Summary of Changes
- Remove the `feature("testing")` flag related to
`kick_secondary_download`.
- Set the default value of `kick_secondary_download` back to false,
reflecting the intended production behavior.
Co-authored-by: Aleksandr Sarantsev <aleksandr.sarantsev@databricks.com>
## Problem
- Closes: https://github.com/neondatabase/neon/issues/12298
## Summary of changes
- Set `timeline_safekeeper_count` in `neon_local` if we have less than 3
safekeepers
- Remove `cfg!(feature = "testing")` code from
`safekeepers_for_new_timeline`
- Change `timeline_safekeeper_count` type to `usize`
## Problem
`compute_ctl` should support gRPC base backups.
Requires #12111.
Requires #12243.
Touches #11926.
## Summary of changes
Support `grpc://` connstrings for `compute_ctl` base backups.
## Problem
The problem has been well described in already-commited PR #11853.
tl;dr: BufferedWriter is sensitive to cancellation, which the previous
approach was not.
The write path was most affected (ingest & compaction), which was mostly
fixed in #11853:
it introduced `PutError` and mapped instances of `PutError` that were
due to cancellation of underlying buffered writer into
`CreateImageLayersError::Cancelled`.
However, there is a long tail of remaining errors that weren't caught by
#11853 that result in `CompactionError::Other`s, which we log with great
noise.
## Solution
The stack trace logging for CompactionError::Other added in #11853
allows us to chop away at that long tail using the following pattern:
- look at the stack trace
- from leaf up, identify the place where we incorrectly map from the
distinguished variant X indicating cancellation to an `anyhow::Error`
- follow that anyhow further up, ensuring it stays the same anyhow all
the way up in the `CompactionError::Other`
- since it stayed one anyhow chain all the way up, root_cause() will
yield us X
- so, in `log_compaction_error`, add an additional `downcast_ref` check
for X
This PR specifically adds checks for
- the flush task cancelling (FlushTaskError, BlobWriterError)
- opening of the layer writer (GateError)
That should cover all the reports in issues
- https://github.com/neondatabase/cloud/issues/29434
- https://github.com/neondatabase/neon/issues/12162
## Refs
- follow-up to #11853
- fixup of / fixes https://github.com/neondatabase/neon/issues/11762
- fixes https://github.com/neondatabase/neon/issues/12162
- refs https://github.com/neondatabase/cloud/issues/29434
We don't have cancellation support for timeline deletions. In other
words, timeline deletion might still go on in an older generation while
we are attaching it in a newer generation already, because the
cancellation simply hasn't reached the deletion code.
This has caused us to hit a situation with offloaded timelines in which
the timeline was in an unrecoverable state: always returning an accepted
response, but never a 404 like it should be.
The detailed description can be found in
[here](https://github.com/neondatabase/cloud/issues/30406#issuecomment-3008667859)
(private repo link).
TLDR:
1. we ask to delete timeline on old pageserver/generation, starts
process in background
2. the storcon migrates the tenant to a different pageserver.
- during attach, the pageserver still finds an index part, so it adds it
to `offloaded_timelines`
4. the timeline deletion finishes, removing the index part in S3
5. there is a retry of the timeline deletion endpoint, sent to the new
pageserver location. it is bound to fail however:
- as the index part is gone, we print `Timeline already deleted in
remote storage`.
- the problem is that we then return an accepted response code, and not
a 404.
- this confuses the code calling us. it thinks the timeline is not
deleted, so keeps retrying.
- this state never gets recovered from until a reset/detach, because of
the `offloaded_timelines` entry staying there.
This is where this PR fixes things: if no index part can be found, we
can safely assume that the timeline is gone in S3 (it's the last thing
to be deleted), so we can remove it from `offloaded_timelines` and
trigger a reupload of the manifest. Subsequent retries will pick that
up.
Why not improve the cancellation support? It is a more disruptive code
change, that might have its own risks. So we don't do it for now.
Fixes https://github.com/neondatabase/cloud/issues/30406
Mainly for general readability. Some notable changes:
- Postgres can be built without the rest of the repository, and in
particular without any of the Rust bits. Some CI scripts took advantage
of that, so let's make that more explicit by separating those parts.
Also add an explicit comment about that in the new postgres.mk file.
- Add a new PG_INSTALL_CACHED variable. If it's set, `make all` and
other top-Makefile targets skip checking if Postgres is up-to-date. This
is also to be used in CI scripts that build and cache Postgres as
separate steps. (It is currently only used in the macos walproposer-lib
rule, but stay tuned for more.)
- Introduce a POSTGRES_VERSIONS variable that lists all supported
PostgreSQL versions. Refactor a few Makefile rules to use that.
## Problem
In large oltp test run
https://github.com/neondatabase/neon/actions/runs/15905488707/job/44859116742
we see that the `Benchmark database maintenance` step is skipped in all
3 strategy variants, however it should be executed in two.
This is due to treating the `test_maintenance` boolean type in the
strategy in the condition of the `Benchmark database maintenance` step
## Summary of changes
Use a boolean condition instead of a string comparison
## Test run from this pull request branch
https://github.com/neondatabase/neon/actions/runs/15923605412
## Problem
When resolving a shard during a split we might have multiple attached
shards with the old shard count (i.e. not all of them are marked in
progress and ignored). Hence, we can compute the desired shard number
based on the old shard count and misroute the request.
## Summary of Changes
Recompute the desired shard every time the shard count changes during
the iteration
# Problem
In #12335 I moved the `authenticate` method outside of the
`connect_to_compute` loop. This triggered [e2e tests to become
flaky](https://github.com/neondatabase/cloud/pull/30533). This
highlighted an edge case we forgot to consider with that change.
When we connect to compute, the compute IP might be cached. This cache
hit might however be stale. Because we can't validate the IP is
associated with a specific compute-id☨, we will succeed the
connect_to_compute operation and fail when it comes to password
authentication☨☨. Before the change, we were invalidating the cache and
triggering wake_compute if the authentication failed.
Additionally, I noticed some faulty logic I introduced 1 year ago
https://github.com/neondatabase/neon/pull/8141/files#diff-5491e3afe62d8c5c77178149c665603b29d88d3ec2e47fc1b3bb119a0a970afaL145-R147
☨ We can when we roll out TLS, as the certificate common name includes
the compute-id.
☨☨ Technically password authentication could pass for the wrong compute,
but I think this would only happen in the very very rare event that the
IP got reused **and** the compute's endpoint happened to be a
branch/replica.
# Solution
1. Fix the broken logic
2. Simplify cache invalidation (I don't know why it was so convoluted)
3. Add a loop around connect_to_compute + authenticate to re-introduce
the wake_compute invalidation we accidentally removed.
I went with this approach to try and avoid interfering with
https://github.com/neondatabase/neon/compare/main...cloneable/proxy-pglb-connect-compute-split.
The changes made in commit 3 will move into `handle_client_request` I
suspect,
## Problem
Some pageservers hit `max_size_entries` limit in staging with only ~25
MiB storage used by basebackup cache. The limit is too strict. It should
be safe to relax it.
- Part of https://github.com/neondatabase/cloud/issues/29353
## Summary of changes
- Increase the default `max_size_entries` from 1000 to 10000
## Problem
Druing shard splits we shut down the remote client early and allow the
parent shard to keep ingesting data. While ingesting data, the wal
receiver task may wait for the current flush to complete in order to
apply backpressure. Notifications are delivered via
`Timeline::layer_flush_done_tx`.
When the remote client was being shut down the flush loop exited
whithout delivering a notification. This left
`Timeline::wait_flush_completion` hanging indefinitely which blocked the
shutdown of the wal receiver task, and, hence, the shard split.
## Summary of Changes
Deliver a final notification when the flush loop is shutting down
without the timeline cancel cancellation token having fired. I tried
writing a test for this, but got stuck in failpoint hell and decided
it's not worth it.
`test_sharding_autosplit`, which reproduces this reliably in CI, passed
with the proposed fix in
https://github.com/neondatabase/neon/pull/12304.
Closes https://github.com/neondatabase/neon/issues/12060
Make the safekeeper `pull_timeline` endpoint support timelines that
haven't had any writes yet. In the storcon managed sk timelines world,
if a safekeeper goes down temporarily, the storcon will schedule a
`pull_timeline` call. There is no guarantee however that by when the
safekeeper is online again, there have been writes to the timeline yet.
The `snapshot` endpoint gives an error if the timeline hasn't had
writes, so we avoid calling it if `timeline_start_lsn` indicates a
freshly created timeline.
Fixes#11422
Part of #11670
## Problem
gRPC base backups do not use the base backup cache.
Touches https://github.com/neondatabase/neon/issues/11728.
## Summary of changes
Integrate gRPC base backups with the base backup cache.
Also fixes a bug where the base backup cache did not differentiate
between primary/replica base backups (at least I think that's a bug?).
## Problem
In our infra config, we have to split server_api_key and other fields in
two files: the former one in the sops file, and the latter one in the
normal config. It creates the situation that we might misconfigure some
regions that it only has part of the fields available, causing
storcon/pageserver refuse to start.
## Summary of changes
Allow PostHog config to have part of the fields available. Parse it
later.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Basebackup cache now uses unbounded channel for prepare requests. In
theory it can grow large if the cache is hung and does not process the
requests.
- Part of https://github.com/neondatabase/cloud/issues/29353
## Summary of changes
- Replace an unbounded channel with a bounded one, the size is
configurable.
- Add `pageserver_basebackup_cache_prepare_queue_size` to observe the
size of the queue.
- Refactor a bit to move all metrics logic to `basebackup_cache.rs`
I was looking at how we could expose our proxy config as toml again, and
as I was writing out the schema format, I noticed some cruft in our CLI
args that no longer seem to be in use.
The redis change is the most complex, but I am pretty sure it's sound.
Since https://github.com/neondatabase/cloud/pull/15613 cplane longer
publishes to the global redis instance.
## Problem
If LFC generation is changed then `lfc_readv_select` will return -1 but
pages are still marked as available in bitmap.
## Summary of changes
Update bitmap after generation check.
Co-authored-by: Kosntantin Knizhnik <konstantin.knizhnik@databricks.com>
## Problem
Fix for https://github.com/neondatabase/neon/pull/12324
## Summary of changes
Need `serde(default)` to allow this field not present in the config,
otherwise there will be a config deserialization error.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
gRPC base backups use gRPC compression. However, this has two problems:
* Base backup caching will cache compressed base backups (making gRPC
compression pointless).
* Tonic does not support varying the compression level, and zstd default
level is 10% slower than gzip fastest level.
Touches https://github.com/neondatabase/neon/issues/11728.
Touches https://github.com/neondatabase/cloud/issues/29353.
## Summary of changes
This patch adds a gRPC parameter `BaseBackupRequest::compression`
specifying the compression algorithm. It also moves compression into
`send_basebackup_tarball` to reduce code duplication.
A follow-up PR will integrate the base backup cache with gRPC.
## Summary
A design for a storage system that allows storage of files required to
make
Neon's Endpoints have a better experience at or after a reboot.
## Motivation
Several systems inside PostgreSQL (and Neon) need some persistent
storage for
optimal workings across reboots and restarts, but still work without.
Examples are the cumulative statistics file in `pg_stat/global.stat`,
`pg_stat_statements`' `pg_stat/pg_stat_statements.stat`, and
`pg_prewarm`'s
`autoprewarm.blocks`. We need a storage system that can store and manage
these files for each Endpoint.
[GH rendered
file](https://github.com/neondatabase/neon/blob/MMeent/rfc-unlogged-file/docs/rfcs/040-Endpoint-Persistent-Unlogged-Files-Storage.md)
Part of https://github.com/neondatabase/cloud/issues/24225
## Problem
part of https://github.com/neondatabase/neon/issues/11813
## Summary of changes
It costs $$$ to directly retrieve the feature flags from the pageserver.
Therefore, this patch adds new APIs to retrieve the spec from the
storcon and updates it via pageserver.
* Storcon retrieves the feature flag and send it to the pageservers.
* If the feature flag gets updated outside of the normal refresh loop of
the pageserver, pageserver won't fetch the flags on its own as long as
the last updated time <= refresh_period.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
https://github.com/neondatabase/cloud/issues/30539
If the current leader cancels the `call` function, then it has removed
the jobs from the queue, but will never finish sending the responses.
Because of this, it is not cancellation safe.
## Summary of changes
Document these functions as not cancellation safe. Move cancellation of
the queued jobs into the queue itself.
## Alternatives considered
1. We could spawn the task that runs the batch, since that won't get
cancelled.
* This requires `fn call(self: Arc<Self>)` or `fn call(&'static self)`.
2. We could add another scopeguard and return the requests back to the
queue.
* This requires that requests are always retry safe, and also requires
requests to be `Clone`.
## Problem
While working more on TLS to compute, I realised that Console Redirect
-> pg-sni-router -> compute would break if channel binding was set to
prefer. This is because the channel binding data would differ between
Console Redirect -> pg-sni-router vs pg-sni-router -> compute.
I also noticed that I actually disabled channel binding in #12145, since
`connect_raw` would think that the connection didn't support TLS.
## Summary of changes
Make sure we specify the channel binding.
Make sure that `connect_raw` can see if we have TLS support.
In `test_layer_download_cancelled_by_config_location`, we simulate hung
downloads via the `before-downloading-layer-stream-pausable` failpoint.
Then, we cancel a timeline via the `location_config` endpoint.
With the new default as of
https://github.com/neondatabase/neon/pull/11712, we would be creating
the timeline on safekeepers regardless if there have been writes or not,
and it turns out the test relied on the timeline not existing on
safekeepers, due to a cancellation bug:
* as established before, the test makes the read path hang
* the timeline cancellation function first cancels the walreceiver, and
only then cancels the timeline's token
* `WalIngest::new` is requesting a checkpoint, which hits the read path
* at cancellation time, we'd be hanging inside the read, not seeing the
cancellation of the walreceiver
* the test would time out due to the hang
This is probably also reproducible in the wild when there is S3
unavailabilies or bottlenecks. So we thought that it's worthwhile to fix
the hang issue. The approach chosen in the end involves the
`tokio::select` macro.
In PR 11712, we originally punted on the test due to the hang and opted
it out from the new default, but now we can use the new default.
Part of https://github.com/neondatabase/neon/issues/12299
pgaudit can spam logs due to all the monitoring that we do. Logs from
these connections are not necessary for HIPPA compliance, so we can stop
logging from those connections.
Part-of: https://github.com/neondatabase/cloud/issues/29574
Signed-off-by: Tristan Partin <tristan@neon.tech>
This makes it possible for the compiler to validate that a match block
matched all PostgreSQL versions we support.
## Problem
We did not have a complete picture about which places we had to test
against PG versions, and what format these versions were: The full PG
version ID format (Major/minor/bugfix `MMmmbb`) as transfered in
protocol messages, or only the Major release version (`MM`). This meant
type confusion was rampant.
With this change, it becomes easier to develop new version-dependent
features, by making type and niche confusion impossible.
## Summary of changes
Every use of `pg_version` is now typed as either `PgVersionId` (u32,
valued in decimal `MMmmbb`) or PgMajorVersion (an enum, with a value for
every major version we support, serialized and stored like a u32 with
the value of that major version)
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
The billing team wants to change the billing events pipeline and use a
common events format in S3 buckets across different event producers.
## Summary of changes
Change the events storage format for billing events from JSON to NDJSON.
Resolves: https://github.com/neondatabase/cloud/issues/29994
## Problem
PGLB will do the connect_to_compute logic, neonkeeper will do the
session establishment logic. We should split it.
## Summary of changes
Moves postgres authentication to compute to a separate routine that
happens after connect_to_compute.
The 1.88.0 stable release is near (this Thursday). We'd like to fix most
warnings beforehand so that the compiler upgrade doesn't require
approval from too many teams.
This is therefore a preparation PR (like similar PRs before it).
There is a lot of changes for this release, mostly because the
`uninlined_format_args` lint has been added to the `style` lint group.
One can read more about the lint
[here](https://rust-lang.github.io/rust-clippy/master/#/uninlined_format_args).
The PR is the result of `cargo +beta clippy --fix` and `cargo fmt`. One
remaining warning is left for the proxy team.
---------
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
## Problem
`Attached(0)` tenant migrations can get stuck if the heatmap file has
not been uploaded.
## Summary of Changes
- Added a test to reproduce the issue.
- Introduced a `kick_secondary_downloads` config flag:
- Enabled in testing environments.
- Disabled in production (and in the new test).
- Updated `Attached(0)` locations to consider the number of secondaries
in their intent when deciding whether to download the heatmap.
## Problem
Part of #11813
## Summary of changes
Add a test API to make it easier to manipulate the feature flags within
tests.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
The scheduler uses total shards per AZ to select the AZ for newly
created or attached tenants.
This makes bad decisions when we have different node counts per AZ -- we
might have 2 very busy pageservers in one AZ, and 4 more lightly loaded
pageservers in other AZs, and the scheduler picks the busy pageservers
because the total shard count in their AZ is lower.
## Summary of changes
- Divide the shard count by the number of nodes in the AZ when scoring
in `get_az_for_new_tenant`
---------
Co-authored-by: John Spray <john.spray@databricks.com>
The `--gzip-probability` parameter was removed in #12250. However,
`test_basebackup_with_high_slru_count` still uses it, and keeps failing.
This patch removes the use of the parameter (gzip is enabled by
default).
## Problem
Part of #11813
## Summary of changes
The current interval is 30s and it costs a lot of $$$. This patch
reduced it to 600s refresh interval (which means that it takes 10min for
feature flags to propagate from UI to the pageserver). In the future we
can let storcon retrieve the feature flags and push it to pageservers.
We can consider creating a new release or we can postpone this to the
week after the next week.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
The 'make all' step must run always. PR #12311 accidentally left the
condition in there to skip it if there were no changes in postgres v14
sources. That condition belonged to a whole different step that was
removed altogether in PR#12311, and the condition should've been removed
too.
Per CI failure:
https://github.com/neondatabase/neon/actions/runs/15820148967/job/44587394469
## Problem
Previously, we couldn't read from an in-memory layer while a batch was
being written to it. Vice-versa, we couldn't write to it while there
was an on-going read.
## Summary of Changes
The goal of this change is to improve concurrency. Writes happened
through a &mut self method so the enforcement was at the type system
level.
We attempt to improve by:
1. Adding interior mutability to EphemeralLayer. This involves wrapping
the buffered writer in a read-write lock.
2. Minimise the time that the read lock is held for. Only hold the read
lock while reading from the buffers (recently flushed or pending
flush). If we need to read from the file, drop the lock and allow IO
to be concurrent.
The new benchmark variants with concurrent reads improve between 70 to
200 percent (against main).
Benchmark results are in this
[commit](891f094ce6).
## Future Changes
We can push the interior mutability into the buffered writer. The
mutable tail goes under a read lock, the flushed part goes into an
ArcSwap and then we can read from anything that is flushed _without_ any
locking.
gRPC base backups send a stream of fixed-size 64KB chunks.
pagebench basebackup with compression enabled shows this to reduce
throughput:
* 64 KB: 55 RPS
* 128 KB: 69 RPS
* 256 KB: 73 RPS
* 1024 KB: 73 RPS
This patch sets the base backup chunk size to 256 KB.
The build-tools image contains various build tools and dependencies,
mostly Rust-related. The compute image build used it to build
compute_ctl and a few other little rust binaries that are included in
the compute image. However, for extensions built in Rust (pgrx), the
build used a different layer which installed the rust toolchain using
rustup.
Switch to using the same rust toolchain for both pgrx-based extensions
and compute_ctl et al. Since we don't need anything else from the
build-tools image, I switched to using the toolchain installed with
rustup, and eliminated the dependency to build-tools altogether. The
compute image build no longer depends on build-tools.
Note: We no longer use 'mold' for linking compute_ctl et al, since mold
is not included in the build-deps-with-cargo layer. We could add it
there, but it doesn't seem worth it. I proposed stopping using mold
altogether in https://github.com/neondatabase/neon/pull/10735, but that
was rejected because 'mold' is faster for incremental builds. That
doesn't matter much for docker builds however, since they're not
incremental, and the compute binaries are not as large as the storage
server binaries anyway.
To avoid duplicating the build logic. `make all` covers the separate
`postgres-*` and `neon-pg-ext` steps, and also does `cargo build`.
That's how you would typically do a full local build anyway.
Every time you run `make`, it runs `make install` on all the PostgreSQL
sources, which copies the header files. That in turn triggers a rebuild
of the `postgres_ffi` crate, and everything that depends on it. We had
worked around this earlier (see #2458), by passing a custom INSTALL
script to the Postgres makefiles, which refrains from updating the
modification timestamp on headers when they have not been changed, but
the v14 makefile didn't obey INSTALL for the header files. Backporting
c0a1d7621b to v14 fixes that.
This backports upstream PostgreSQL commit c0a1d7621b to v14.
Corresponding PR in the 'postgres' repo:
https://github.com/neondatabase/postgres/pull/660
## Problem
In #12217, we began passing the stripe size in reattach responses, and
persisting it in the on-disk state. This is necessary to ensure the
storage controller and Pageserver have a consistent view of the intended
stripe size of unsharded tenants, which will be used for splits that do
not specify a stripe size. However, for backwards compatibility, these
stripe sizes were optional.
## Summary of changes
Make the stripe sizes required for reattach responses and on-disk
location configs. These will always be provided by the previous
(current) release.
The previous behavior was for the compute to override control plane
options if there was a conflict. We want to change the behavior so that
the control plane has the absolute power on what is right. In the event
that we need a new option passed to the compute as soon as possible, we
can initially roll it out in the control plane, and then migrate the
option to EXTRA_OPTIONS within the compute later, for instance.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We need to specify the number of safekeepers for neon_local without
`testing` feature.
Also we need this option for testing different configurations of
safekeeper migration code.
We cannot set it in `neon_fixtures.py` and in the default config of
`neon_local` yet, because it will fail compatibility tests. I'll make a
separate PR with removing `cfg!("testing")` completely and specifying
this option in the config when this option reaches the release branch.
- Part of https://github.com/neondatabase/neon/issues/12298
## Summary of changes
- Add `timeline_safekeeper_count` config option to storcon and
neon_local
Enable it across tests and set it as default. Marks the first milestone
of https://github.com/neondatabase/neon/issues/9114. We already enabled
it in all AWS regions and planning to enable it in all Azure regions
next week.
will merge after we roll out in all regions.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Timeline GC is very aggressive with regards to layer map locking.
We've seen timelines with loads of layers in production that hold the
write lock for the layer map for 30 minutes at a time.
This blocks reads and the write path to some extent.
## Summary of changes
Determining the set of layers to GC is done under the read lock.
Applying the updates is done under the write lock.
Previously, everything was done under write lock.
See #11942
Idea:
* if connections are short lived, they can get enqueued and then also
remove themselves later if they never made it to redis. This reduces the
load on the queue.
* short lived connections (<10m, most?) will only issue 1 command, we
remove the delete command and rely on ttl.
* we can enqueue as many commands as we want, as we can always cancel
the enqueue, thanks to the ~~intrusive linked lists~~ `BTreeMap`.
This improves `pagebench getpage-latest-lsn` gRPC support by:
* Using `page_api::Client`.
* Removing `--protocol`, and using the `page-server-connstring` scheme
instead.
* Adding `--compression` to enable zstd compression.
## Problem
Pagebench does not support gRPC for `basebackup` benchmarks.
Requires #12243.
Touches #11728.
## Summary of changes
Add gRPC support via gRPC connstrings, e.g. `pagebench basebackup
--page-service-connstring grpc://localhost:51051`.
Also change `--gzip-probability` to `--no-compression`, since this must
be specified per-client for gRPC.
Introduce a separate `postgres_ffi_types` crate which contains a few
types and functions that were used in the API. `postgres_ffi_types` is a
much small crate than `postgres_ffi`, and it doesn't depend on bindgen
or the Postgres C headers.
Move NeonWalRecord and Value types to wal_decoder crate. They are only
used in the pageserver-safekeeper "ingest" API. The rest of the ingest
API types are defined in wal_decoder, so move these there as well.
We have been bad at keeping them up-to-date, several contrib modules and
neon extensions were missing from the clean rules. Give up trying, and
remove the targets altogether. In practice, it's straightforward to just
do `rm -rf pg_install/build`, so the clean-targets are hardly worth the
maintenance effort.
I kept `make distclean` though. The rule for that is simple enough.
Since commit 87ad50c925, storage_controller has used diesel_async, which
in turn uses tokio-postgres as the Postgres client, which doesn't
require libpq. Thus we no longer need libpq in the storage image.
## Problem
The gRPC page service should support compression.
Requires #12111.
Touches #11728.
Touches https://github.com/neondatabase/cloud/issues/25679.
## Summary of changes
Add support for gzip and zstd compression in the server, and a client
parameter to enable compression.
This will need further benchmarking under realistic network conditions.
## Problem
GC info is an input to updating layer visibility.
Currently, gc info is updated on timeline activation and visibility is
computed on tenant attach, so we ignore branch points and compute
visibility by taking all layers into account.
Side note: gc info is also updated when timelines are created and
dropped. That doesn't help because we create the timelines in
topological order from the root. Hence the root timeline goes first,
without context of where the branch points are.
The impact of this in prod is that shards need to rehydrate layers after
live migration since the non-visible ones were excluded from the
heatmap.
## Summary of Changes
Move the visibility calculation into tenant attachment instead of
activation.
## Problem
`test_runner` integration tests should support gRPC.
Touches #11926.
## Summary of changes
* Enable gRPC for Pageservers, with dynamic port allocations.
* Add a `grpc` parameter for endpoint creation, plumbed through to
`neon_local endpoint create`.
No tests actually use gRPC yet, since computes don't support it yet.
## Problem
`test_sharding_failures` is flaky due to interference from the
`background_reconcile` process.
The details are in the issue
https://github.com/neondatabase/neon/issues/12029.
## Summary of changes
- Use `reconcile_until_idle` to ensure a stable state before running
test assertions
- Added error tolerance in `reconcile_until_idle` test function (Failure
cases: 1, 3, 19, 20)
- Ignore the `Keeping extra secondaries` warning message since it i
retryable (Failure case: 2)
- Deduplicated code in `assert_rolled_back` and `assert_split_done`
- Added a log message before printing plenty of Node `X` seen on
pageserver `Y`
## Problem
- We run the large tenant oltp workload with a fixed size (larger than
existing customers' workloads).
Our customer's workloads are continuously growing and our testing should
stay ahead of the customers' production workloads.
- we want to touch all tables in the tenant's database (updates) so that
we simulate a continuous change in layer files like in a real production
workload
- our current oltp benchmark uses a mixture of read and write
transactions, however we also want a separate test run with read-only
transactions only
## Summary of changes
- modify the existing workload to have a separate run with pgbench
custom scripts that are read-only
- create a new workload that
- grows all large tables in each run (for the reuse branch in the large
oltp tenant's project)
- updates a percentage of rows in all large tables in each run (to
enforce table bloat and auto-vacuum runs and layer rebuild in
pageservers
Each run of the new workflow increases the logical database size about
16 GB.
We start with 6 runs per day which will give us about 96-100 GB growth
per day.
---------
Co-authored-by: Alexander Lakhin <alexander.lakhin@neon.tech>
- Add optional `?mode=fast|immediate` to `/terminate`, `fast` is
default. Immediate avoids waiting 30
seconds before returning from `terminate`.
- Add `TerminateMode` to `ComputeStatus::TerminationPending`
- Use `/terminate?mode=immediate` in `neon_local` instead of `pg_ctl
stop` for `test_replica_promotes`.
- Change `test_replica_promotes` to check returned LSN
- Annotate `finish_sync_safekeepers` as `noreturn`.
https://github.com/neondatabase/cloud/issues/29807
This check API only cheks the safekeeper_connstrings at the moment, and
the validation is limited to checking we have at least one entry in
there, and no duplicates.
## Problem
If the compute_ctl service is started with an empty list of safekeepers,
then hard-to-debug errors may happen at runtime, where it would be much
easier to catch them early.
## Summary of changes
Add an entry point in the compute_ctl API to validate the configuration
for safekeeper_connstrings.
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Create a separate stage for downloading the Rust toolchain for pgrx, so
that it can be cached independently of the pg-build layer. Before this,
the 'pg-build-nonroot=with-cargo' layer was unnecessarily rebuilt every
time there was a change in PostgreSQL sources. Furthermore, this allows
using the same cached layer for building the compute images of all
Postgres versions.
## Problem
Full basebackups are used in tests, and may be useful for debugging as
well, so we should support them in the gRPC API.
Touches #11728.
## Summary of changes
Add `GetBaseBackupRequest::full` to generate full base backups.
The libpq implementation also allows specifying `prev_lsn` for full
backups, i.e. the end LSN of the previous WAL record. This is omitted in
the gRPC API, since it's not used by any tests, and presumably of
limited value since it's autodetected. We can add it later if we find
that we need it.
## Problem
The checksum for eigen (a dependency for onnxruntime) has changed which
breaks compute image build.
## Summary of changes
- Add a patch for onnxruntime which backports changes from
f57db79743
(we keep the current version)
Ref https://github.com/microsoft/onnxruntime/issues/24861
## Problem
https://github.com/neondatabase/neon/issues/7570
Even triggers are supported only for superusers.
## Summary of changes
Temporary switch to superuser when even trigger is created and disable
execution of user's even triggers under superuser.
---------
Co-authored-by: Dimitri Fontaine <dim@tapoueh.org>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
When converting `proto::GetPageRequest` into `page_api::GetPageRequest`
and validating the request, errors are returned as `tonic::Status`. This
will tear down the GetPage stream, which is disruptive and unnecessary.
## Summary of changes
Emit invalid request errors as `GetPageResponse` with an appropriate
`status_code` instead.
Also move the conversion from `tonic::Status` to `GetPageResponse` out
into the stream handler.
## Problem
Compatibility tests may be run against a compatibility snapshot
generated with --timelines-onto-safekeepers=false. We need to start the
compute without a generation (or with 0 generation) if the timeline is
not storcon-managed, otherwise the compute will hang.
- Follow up on https://github.com/neondatabase/neon/pull/12203
- Relates to https://github.com/neondatabase/neon/pull/11712
## Summary of changes
- Handle compatibility snapshot generated with no
`--timelines-onot-safekeepers` properly
## Problem
The cache was introduced as a hackathon project and the only supported
limit was the number of entries.
The basebackup entry size may vary. We need to have more control over
disk space usage to ship it to production.
- Part of https://github.com/neondatabase/cloud/issues/29353
## Summary of changes
- Store the size of entries in the cache and use it to limit
`max_total_size_bytes`
- Add the size of the cache in bytes to metrics.
## Problem
`neon_local` should support endpoints using gRPC, by providing `grpc://`
connstrings with the Pageservers' gRPC ports.
Requires #12268.
Touches #11926.
## Summary of changes
* Add `--grpc` switch for `neon_local endpoint create`.
* Generate `grpc://` connstrings for endpoints when enabled.
Computes don't actually support `grpc://` connstrings yet, but will
soon.
gRPC is configured when the endpoint is created, not when it's started,
such that it continues to use gRPC across restarts and reconfigurations.
In particular, this is necessary for the storage controller's local
notify hook, which can't easily plumb through gRPC configuration from
the start/reconfigure commands but has access to the endpoint's
configuration.
## Problem
The metrics `storage_controller_safekeeper_request_error` and
`storage_controller_safekeeper_request_latency` currently use
`pageserver_id` as a label.
This can be misleading, as the metrics are about safekeeper requests.
We want to replace this with a more accurate label — either
`safekeeper_id` or `node_id`.
## Summary of changes
- Introduced `SafekeeperRequestLabelGroup` with `safekeeper_id`.
- Updated the affected metrics to use the new label group.
- Fixed incorrect metric usage in safekeeper_client.rs
## Follow-up
- Review usage of these metrics in alerting rules and existing Grafana
dashboards to ensure this change does not break something.
## Problem
Pageservers now expose a gRPC API on a separate address and port. This
must be registered with the storage controller such that it can be
plumbed through to the compute via cplane.
Touches #11926.
## Summary of changes
This patch registers the gRPC address and port with the storage
controller:
* Add gRPC address to `nodes` database table and `NodePersistence`, with
a Diesel migration.
* Add gRPC address in `NodeMetadata`, `NodeRegisterRequest`,
`NodeDescribeResponse`, and `TenantLocateResponseShard`.
* Add gRPC address flags to `storcon_cli node-register`.
These changes are backwards-compatible, since all structs will ignore
unknown fields during deserialization.
## Problem
The gRPC base backup implementation has a few issues: chunks are not
properly bounded, and it's not possible to omit the LSN.
Touches #11728.
## Summary of changes
* Properly bound chunks by using a limited writer.
* Use an `Option<Lsn>` rather than a `ReadLsn` (the latter requires an
LSN).
## Problem
The `stably_attached` function is hard to read due to deeply nested
conditionals
## Summary of Changes
- Refactored `stably_attached` to use early returns and the `?` operator
for improved readability
## Problem
If the node intent includes more than one secondary, we can generate a
replace optimization using a candidate node that is already a secondary
location.
## Summary of changes
- Exclude all other secondary nodes from the scoring process to ensure
optimal candidate selection.
## Problem
We could easily miss a sanitizer-detected defect, if it occurred due to
some race condition, as we just rerun the test and if it succeeds, the
overall test run is considered successful. It was more reasonable
before, when we had much more unstable tests in main, but now we can
track all test failures.
## Summary of changes
Don't rerun failed tests.
## Problem
We don't test debug builds for v14..v16 in the regular "Build and Test"
runs to perform the testing faster, but it means we can't detect
assertion failures in those versions.
(See https://github.com/neondatabase/neon/issues/11891,
https://github.com/neondatabase/neon/issues/11997)
## Summary of changes
Add a new workflow to test all build types and all versions on all
architectures.
## Problem
In our environment, we don't always have access to the pagectl tool on
the pageserver. We have to download the page files to local env to
introspect them. Hence, it'll be useful to be able to parse the local
files using `pagectl`.
## Summary of changes
* Add `dump-layer-local` to `pagectl` that takes a local path as
argument and returns the layer content:
```
cargo run -p pagectl layer dump-layer-local ~/Desktop/000000067F000040490002800000FFFFFFFF-030000000000000000000000000000000002__00003E7A53EDE611-00003E7AF27BFD19-v1-00000001
```
* Bonus: Fix a bug in `pageserver/ctl/src/draw_timeline_dir.rs` in which
we don't filter out temporary files.
## Problem
The `page_api` domain types are missing a few derives.
## Summary of changes
Add `Clone`, `Copy`, and `Debug` derives for all types where
appropriate.
## Problem
Comment for `storage_controller_reconcile_long_running` metric was
copy-pasted and not updated in #9207
## Summary of changes
- Fixed comment
## Problem
Comment is in incorrect place: `/metrics` code is above its description
comment.
## Summary of changes
- `/metrics` code is now below the comment
## Problem
Need to fix naming `safkeeper` -> `safekeeper`
## Summary of changes
- `storage_controller_safkeeper_reconciles_*` renamed to
`storage_controller_safekeeper_reconciles_*`
## Problem
ChaosInjector is intended to skip non-active scheduling policies, but
the current logic skips active shards instead.
## Summary of changes
- Fixed shard eligibility condition to correctly allow chaos injection
for shards with an Active scheduling policy.
## Problem
We would easily hit this limit for a tenant running for enough long
time.
## Summary of changes
Remove the max key limit for time-travel recovery if the command is
running locally.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Part of #11813
PostHog has two endpoints to retrieve feature flags: the old project ID
one that uses personal API token, and the new one using a special
feature flag secure token that can only retrieve feature flag. The new
API I added in this patch is not documented in the PostHog API doc but
it's used in their Python SDK.
## Summary of changes
Add support for "feature flag secure token API". The API has no way of
providing a project ID so we verify if the retrieved spec is consistent
with the project ID specified by comparing the `team_id` field.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`test_historic_storage_formats` uses `/tenant_import` to import historic
data. Tenant import does not create timelines onto safekeepers, because
they might already exist on some safekeeper set. If it does, then we may
end up with two different quorums accepting WAL for the same timeline.
If the tenant import is used in a real deployment, the administrator is
responsible for looking for the proper safekeeper set and migrate
timelines into storcon-managed timelines.
- Relates to https://github.com/neondatabase/neon/pull/11712
## Summary of changes
- Create timelines onto safekeepers manually after tenant import in
`test_historic_storage_formats`
- Add a note to tenant import that timelines will be not storcon-managed
after the import.
## Problem
* Inside `compact_with_gc_inner`, there is a similar log line:
db24ba95d1/pageserver/src/tenant/timeline/compaction.rs (L3181-L3187)
* Also, I think it would be useful when debugging to have the ability to
select a particular sub-compaction job (e.g., `1/100`) to see all the
logs for that job.
## Summary of changes
* Attach a span to the `compact_with_gc_inner`.
CC: @skyzh
Sometimes during a failed redis connection attempt at the init stage
proxy pod can continuously restart. This, in turn, can aggravate the
problem if redis is overloaded.
Solves the #11114
## Problem
The location config (which includes the stripe size) is stored on
pageserver disk.
For unsharded tenants we [do not include the shard identity in the
serialized
description](ad88ec9257/pageserver/src/tenant/config.rs (L64-L66)).
When the pageserver restarts, it reads that configuration and will use
the stripe size from there
and rely on storcon input from reattach for generation and mode.
The default deserialization is ShardIdentity::unsharded. This has the
new default stripe size of 2048.
Hence, for unsharded tenants we can be running with a stripe size
different from that the one in the
storcon observed state. This is not a problem until we shard split
without specifying a stripe size (i.e. manual splits via the UI or
storcon_cli). When that happens the new shards will use the 2048 stripe
size until storcon realises and switches them back. At that point it's
too late, since we've ingested data with the wrong stripe sizes.
## Summary of changes
Ideally, we would always have the full shard identity on disk. To
achieve this over two releases we do:
1. Always persist the shard identity in the location config on the PS.
2. Storage controller includes the stripe size to use in the re attach
response.
After the first release, we will start persisting correct stripe sizes
for any tenant shard that the storage controller
explicitly sends a location_conf. After the second release, the
re-attach change kicks in and we'll persist the
shard identity for all shards.
## Problem
Base64 0.13 is outdated.
## Summary of changes
Update base64 to 0.22. Affects mostly proxy and proxy libs. Also upgrade
serde_with to remove another dep on base64 0.13 from dep tree.
## Problem
The test creates an endpoint and deletes its tenant. The compute cannot
stop gracefully because it tries to write a checkpoint shutdown record
into the WAL, but the timeline had been already deleted from
safekeepers.
- Relates to https://github.com/neondatabase/neon/pull/11712
## Summary of changes
Stop the compute before deleting a tenant
## Problem
Compatibility tests may be run against a compatibility snapshot
generated with `--timelines-onto-safekeepers=false`. We need to start
the compute without a generation (or with 0 generation) if the timeline
is not storcon-managed, otherwise the compute will hang.
This handler is needed to check if the timeline is storcon-managed.
It's also needed for better test coverage of safekeeper migration code.
- Relates to https://github.com/neondatabase/neon/pull/11712
## Summary of changes
- Implement `tenant_timeline_locate` handler in storcon to get
safekeeper info from storcon's DB
## Problem
We hold the layer map for too long on occasion.
## Summary of changes
This should help us identify the places where it's happening from.
Related https://github.com/neondatabase/neon/issues/12182
## Problem
DROP FUNCTION doesn't allow to specify default for parameters.
## Summary of changes
Remove DEFAULT clause from pgxn/neon/neon--1.6--1.5.sql
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
The project limits were not respected, resulting in errors.
## Summary of changes
Now limits are checked before running an action, and if the action is
not possible to run, another random action will be run.
---------
Co-authored-by: Peter Bendel <peterbendel@neon.tech>
## Problem
See https://github.com/neondatabase/neon/issues/12018
Now `prefetch_register_bufferv` calculates min_ring_index of all vector
requests.
But because of pump prefetch state or connection failure, previous slots
can be already proceeded and reused.
## Summary of changes
Instead of returning minimal index, this function should return last
slot index.
Actually result of this function is used only in two places. A first
place just fort checking (and this check is redundant because the same
check is done in `prefetch_register_bufferv` itself.
And in the second place where index of filled slot is actually used,
there is just one request.
Sp fortunately this bug can cause only assert failure in debug build.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
There is this TODO in code:
https://github.com/neondatabase/neon/blob/main/pageserver/src/tenant/mgr.rs#L300-L302
This is an old TODO by @jcsp.
## Summary of changes
This PR addresses the TODO. Specifically, it removes a global static
`TENANTS`. Instead the `TenantManager` now directly manages the tenant
map. Enhancing abstraction.
Essentially, this PR moves all module-level methods to inside the
implementation of `TenantManager`.
## Problem
Looks like our sql-over-http tests get to rely on "trust"
authentication, so the path that made sure the authkeys data was set was
never being hit.
## Summary of changes
Slight refactor to WakeComputeBackends, as well as making sure auth keys
are propagated. Fix tests to ensure passwords are tested.
## Problem
`VotesCollectedMset` uses the wrong safekeeper to update truncateLsn.
This led to some failed assert later in the code during running
safekeeper migration tests.
- Relates to https://github.com/neondatabase/neon/issues/11823
## Summary of changes
Use proper safekeeper to update truncateLsn in VotesCollectedMset
## Problem
part of https://github.com/neondatabase/neon/issues/11813
## Summary of changes
Collect pageserver hostname property so that we can use it in the
PostHog UI. Not sure if this is the best way to do that -- open to
suggestions.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
part of https://github.com/neondatabase/neon/issues/7546
Add Azure time travel recovery support. The tricky thing is how Azure
handles deletes in its blob version API. For the following sequence:
```
upload file_1 = a
upload file_1 = b
delete file_1
upload file_1 = c
```
The "delete file_1" won't be stored as a version (as AWS did).
Therefore, we can never rollback to a state where file_1 is temporarily
invisible. If we roll back to the time before file_1 gets created for
the first time, it will be removed correctly.
However, this is fine for pageservers, because (1) having extra files in
the tenant storage is usually fine (2) for things like
timelines/X/index_part-Y.json, it will only be deleted once, so it can
always be recovered to a correct state. Therefore, I don't expect any
issues when this functionality is used on pageserver recovery.
TODO: unit tests for time-travel recovery.
## Summary of changes
Add Azure blob storage time-travel recovery support.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We are getting tenants with a lot of branches and num of timelines is a
good indicator of pageserver loads. I added this metrics to help us
better plan pageserver capacities.
## Summary of changes
Add `pageserver_timeline_states_count` with two labels: active +
offloaded.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
If a shard split fails and must roll back, the tenant may hit a cold
start as the parent shard's files have already been removed from local
disk.
External contribution with minor adjustments, see
https://neondb.slack.com/archives/C08TE3203RQ/p1748246398269309.
## Summary of changes
Keep the parent shard's files on local disk until the split has been
committed, such that they are available if the spilt is rolled back. If
all else fails, the files will be removed on the next Pageserver
restart.
This should also be fine in a mixed version:
* New storcon, old Pageserver: the Pageserver will delete the files
during the split, storcon will log an error when the cleanup detach
fails.
* Old storcon, new Pageserver: the Pageserver will leave the parent's
files around until the next Pageserver restart.
The change looks good to me, but shard splits are delicate so I'd like
some extra eyes on this.
The current cache invalidation messages are far too specific. They
should be more generic since it only ends up triggering a
`GetEndpointAccessControl` message anyway.
Mappings:
* `/allowed_ips_updated`, `/block_public_or_vpc_access_updated`, and
`/allowed_vpc_endpoints_updated_for_projects` ->
`/project_settings_update`.
* `/allowed_vpc_endpoints_updated_for_org` ->
`/account_settings_update`.
* `/password_updated` -> `/role_setting_update`.
I've also introduced `/endpoint_settings_update`.
All message types support singular or multiple entries, which allows us
to simplify things both on our side and on cplane side.
I'm opening a PR to cplane to apply the above mappings, but for now
using the old phrases to allow both to roll out independently.
This change is inspired by my need to add yet another cached entry to
`GetEndpointAccessControl` for
https://github.com/neondatabase/cloud/issues/28333
We might delete timelines on safekeepers before we are deleting them on
pageservers. This should be an exceptional situation, but can occur. As
the first step to improve behaviour here, emit a special error that is
less scary/obscure than "was not found in global map".
It is for example emitted when the pageserver tries to run
`IDENTIFY_SYSTEM` on a timeline that has been deleted on the safekeeper.
Found when analyzing the failure of
`test_scrubber_physical_gc_timeline_deletion` when enabling
`--timelines-onto-safekeepers` on the pytests.
Due to safekeeper restarts, there is no hard guarantee that we will keep
issuing this error, so we need to think of something better if we start
encountering this in staging/prod. But I would say that the introduction
of `--timelines-onto-safekeepers` in the pytests and into staging won't
change much about this: we are already deleting timelines from there. In
`test_scrubber_physical_gc_timeline_deletion`, we'd just be leaking the
timeline before on the safekeepers.
Part of #11712
## Problem
PGLB/Neonkeeper needs to separate the concerns of connecting to compute,
and authenticating to compute.
Additionally, the code within `connect_to_compute` is rather messy,
spending effort on recovering the authentication info after
wake_compute.
## Summary of changes
Split `ConnCfg` into `ConnectInfo` and `AuthInfo`. `wake_compute` only
returns `ConnectInfo` and `AuthInfo` is determined separately from the
`handshake`/`authenticate` process.
Additionally, `ConnectInfo::connect_raw` is in-charge or establishing
the TLS connection, and the `postgres_client::Config::connect_raw` is
configured to use `NoTls` which will force it to skip the TLS
negotiation. This should just work.
## Problem
Removed nodes can re-add themselves on restart if not properly
tombstoned. We need a mechanism (e.g. soft-delete flag) to prevent this,
especially in cases where the node is unreachable.
More details there: #12036
## Summary of changes
- Introduced `NodeLifecycle` enum to represent node lifecycle states.
- Added a string representation of `NodeLifecycle` to the `nodes` table.
- Implemented node removal using a tombstone mechanism.
- Introduced `/debug/v1/tombstone*` handlers to manage the tombstone
state.
## Problem
Makes it easier to debug AWS permission issues (i.e., storage scrubber)
## Summary of changes
Install awscliv2 into the docker image.
Signed-off-by: Alex Chi Z <chi@neon.tech>
neon_local's timeline import subcommand creates timelines manually, but
doesn't create them on the safekeepers. If a test then tries to open an
endpoint to read from the timeline, it will error in the new world with
`--timelines-onto-safekeepers`.
Therefore, if that flag is enabled, create the timelines on the
safekeepers.
Note that this import functionality is different from the fast import
feature (https://github.com/neondatabase/neon/issues/10188, #11801).
Part of #11670
As well as part of #11712
## Problem
The `computed_columns` test assumes that computed columns are always
faster than the request itself. However, this is not always the case on
Neon, which can lead to flaky results.
## Summary of changes
The `computed_columns` test is excluded from the PostGIS test for
PostgreSQL v16, accompanied by related patch refactoring.
## Problem
After introducing a naive downtime calculation for the Postgres process
inside compute in https://github.com/neondatabase/neon/pull/11346, I
noticed that some amount of computes regularly report short downtime.
After checking some particular cases, it looks like all of them report
downtime close to the end of the life of the compute, i.e., when the
control plane calls a `/terminate` and we are waiting for Postgres to
exit.
Compute monitor also produces a lot of error logs because Postgres stops
accepting connections, but it's expected during the termination process.
## Summary of changes
Regularly check the compute status inside the main compute monitor loop
and exit gracefully when the compute is in some terminal or
soon-to-be-terminal state.
---------
Co-authored-by: Tristan Partin <tristan@neon.tech>
## Problem
- `test_basebackup_cache` fails in
https://github.com/neondatabase/neon/pull/11712 because after the
timelines on safekeepers are managed by storage controller, they do
contain proper start_lsn and the compute_ctl tool sends the first
basebackup request with this LSN.
- `Failed to prepare basebackup` log messages during timeline
initialization, because the timeline is not yet in the global timeline
map.
- Relates to https://github.com/neondatabase/cloud/issues/29353
## Summary of changes
- Account for `timeline_onto_safekeepers` storcon's option in the test.
- Do not trigger basebackup prepare during the timeline initialization.
## Problem
The new gRPC page service protocol supports client-side batches. The
current libpq protocol only does best-effort server-side batching.
To compare these approaches, Pagebench should support submitting
contiguous page batches, similar to how Postgres will submit them (e.g.
with prefetches or vectored reads).
## Summary of changes
Add a `--batch-size` parameter specifying the size of contiguous page
batches. One batch counts as 1 RPS and 1 queue depth.
For the libpq protocol, a batch is submitted as individual requests and
we rely on the server to batch them for us. This will give a realistic
comparison of how these would be processed in the wild (e.g. when
Postgres sends 100 prefetch requests).
This patch also adds some basic validation of responses.
## Problem
We support two ingest protocols on the pageserver: vanilla and
interpreted.
Interpreted has been the only protocol in use for a long time.
## Summary of changes
* Remove the ingest handling of the vanilla protocol
* Remove tenant and pageserver configuration for it
* Update all tests that tweaked the ingest protocol
## Compatibility
Backward compatibility:
* The new pageserver version can read the existing pageserver
configuration and it will ignore the unknown field.
* When the tenant config is read from the storcon db or from the
pageserver disk, the extra field will be ignored.
Forward compatiblity:
* Both the pageserver config and the tenant config map missing fields to
their default value.
I'm not aware of any tenant level override that was made for this knob.
## Problem
It will be useful to understand what kind of queries our clients are
executed.
And one of the most important characteristic of query is query execution
time - at least it allows to distinguish OLAP and OLTP queries. Also
monitoring query execution time can help to detect problem with
performance (assuming that workload is more or less stable).
## Summary of changes
Add query execution time histogram.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Split the modules responsible for passing data and connecting to compute
from auth and waking for PGLB.
This PR just moves files. The waking is going to get removed from pglb
after this.
## Problem
Part of https://github.com/neondatabase/neon/issues/11813
In PostHog UI, we need to create the properties before using them as a
filter. We report all variants automatically when we start the
pageserver. In the future, we can report all real tenants instead of
fake tenants (we do that now to save money + we don't need real tenants
in the UI).
## Summary of changes
* Collect `region`, `availability_zone`, `pageserver_id` properties and
use them in the feature evaluation.
* Report 10 fake tenants on each pageserver startup.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
I believe in all environments we now specify either required/rejected
for proxy-protocol V2 as required. We no longer rely on the supported
flow. This means we no longer need to keep around read bytes incase
they're not in a header.
While I designed ChainRW to be fast (the hot path with an empty buffer
is very easy to branch predict), it's still unnecessary.
## Summary of changes
* Remove the ChainRW wrapper
* Refactor how we read the proxy-protocol header using read_exact.
Slightly worse perf but it's hardly significant.
* Don't try and parse the header if it's rejected.
`safekeepers_cmp` was added by #8840 to make changes of the safekeeper
set order independent: a `sk1,sk2,sk3` specifier changed to
`sk3,sk1,sk2` should not cause a walproposer restart. However, this
check didn't support generations, in the sense that it would see the
`g#123:` as part of the first safekeeper in the list, and if the first
safekeeper changes, it would also restart the walproposer.
Therefore, parse the generation properly and make it not be a part of
the generation.
This PR doesn't add a specific test, but I have confirmed locally that
`test_safekeepers_reconfigure_reorder` is fixed with the changes of PR
#11712 applied thanks to this PR.
Part of https://github.com/neondatabase/neon/issues/11670
## Problem
Inbetween adding the TLS config for compute-ctl, and adding the TLS
config in controlplane, we switched from using a provision flag to a
bind flag. This happened to work in all of my testing in preview regions
as they have no VM pool, so each bind was also a provision. However, in
staging I found that the TLS config is still only processed during
provision, even though it's only sent on bind.
## Summary of changes
* Add a new feature flag value, `tls_experimental`, which tells
postgres/pgbouncer/local_proxy to use the TLS certificates on bind.
* compute_ctl on provision will be told where the certificates are,
instead of being told on bind.
Url::to_string() adds a trailing slash on the base URL, so when we did
the format!(), we were adding a double forward slash.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
The gRPC page service doesn't respect `get_vectored_concurrent_io` and
always uses sequential IO.
## Summary of changes
Spawn a sidecar task for concurrent IO when enabled.
Cancellation will be addressed separately.
## Problem
The script `compute.sh` had a non-consistent coding style and didn't
follow best practices for modern bash scripts
## Summary of changes
The coding style was fixed to follow best practices.
## Problem
We want to repro an OOM situation, but large partial reads are required.
## Summary of Changes
Make the max partial read size configurable for import jobs.
## Problem
We don't currently run tests for PostGIS in our test environment.
## Summary of Changes
- Added PostGIS test support for PostgreSQL v16 and v17
- Configured different PostGIS versions based on PostgreSQL version:
- PostgreSQL v17: PostGIS 3.5.0
- PostgreSQL v14/v15/v16: PostGIS 3.3.3
- Added necessary test scripts and configurations
This ensures our PostgreSQL implementation remains compatible with this
widely-used extension.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
## Problem
Part of https://github.com/neondatabase/neon/issues/11813
## Summary of changes
Add a counter on the feature evaluation outcome and we will set up
alerts for too many failed evaluations in the future.
Signed-off-by: Alex Chi Z <chi@neon.tech>
JsonResponse::error() properly logs an error message which can be read
in the compute logs. invalid_status() was not going through that helper
function, thus not logging anything.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
This is already the default in production and in our test suite.
## Summary of changes
Set the default proto to interpreted to reduce friction when spinning up
new regions or cells.
## Problem
Currently, `page_api` domain types validate message invariants both when
converting Protobuf → domain and domain → Protobuf. This is annoying for
clients, because they can't use stream combinators to convert streamed
requests (needed for hot path performance), and also performs the
validation twice in the common case.
Blocks #12099.
## Summary of changes
Only validate the Protobuf → domain type conversion, i.e. on the
receiver side, and make domain → Protobuf infallible. This is where it
matters -- the Protobuf types are less strict than the domain types, and
receivers should expect all sorts of junk from senders (they're not
required to validate anyway, and can just construct an invalid message
manually).
Also adds a missing `impl From<CheckRelExistsRequest> for
proto::CheckRelExistsRequest`.
## Problem
Setting `max_batch_size` to anything higher than
`Timeline::MAX_GET_VECTORED_KEYS` will cause runtime error. We should
rather fail fast at startup if this is the case.
## Summary of changes
* Create `max_get_vectored_keys` as a new configuration (default to 32);
* Validate `max_batch_size` against `max_get_vectored_keys` right at
config parsing and validation.
Closes https://github.com/neondatabase/neon/issues/11994
## Problem
The gRPC `page_api` domain types used smallvecs to avoid heap
allocations in the common case where a single page is requested.
However, this is pointless: the Protobuf types use a normal vec, and
converting a smallvec into a vec always causes a heap allocation anyway.
## Summary of changes
Use a normal `Vec` instead of a `SmallVec` in `page_api` domain types.
## Problem
We print a backtrace in an info level log every 10 seconds while waiting
for the import data to land in the bucket.
## Summary of changes
The backtrace is not useful. Remove it.
## Problem
We should use the full host name for computes, according to
https://github.com/neondatabase/cloud/issues/26005 , but now a truncated
host name is used.
## Summary of changes
The URL for REMOTE_ONNX is rewritten using the FQDN.
## Problem
fix https://github.com/neondatabase/neon/issues/12101; this is a quick
hack and we need better API in the future.
In `get_db_size`, we call `get_reldir_size` for every relation. However,
we do the same deserializing the reldir directory thing for every
relation. This creates huge CPU overhead.
## Summary of changes
Get and deserialize the reldir v1 key once and use it across all
get_rel_size requests.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We should expose the page service over gRPC.
Requires #12093.
Touches #11728.
## Summary of changes
This patch adds an initial page service implementation over gRPC. It
ties in with the existing `PageServerHandler` request logic, to avoid
the implementations drifting apart for the core read path.
This is just a bare-bones functional implementation. Several important
aspects have been omitted, and will be addressed in follow-up PRs:
* Limited observability: minimal tracing, no logging, limited metrics
and timing, etc.
* Rate limiting will currently block.
* No performance optimization.
* No cancellation handling.
* No tests.
I've only done rudimentary testing of this, but Pagebench passes at
least.
A smaller version of #12066 that is somewhat easier to review.
Now that I've been using https://crates.io/crates/top-type-sizes I've
found a lot more of the low hanging fruit that can be tweaks to reduce
the memory usage.
Some context for the optimisations:
Rust's stack allocation in futures is quite naive. Stack variables, even
if moved, often still end up taking space in the future. Rearranging the
order in which variables are defined, and properly scoping them can go a
long way.
`async fn` and `async move {}` have a consequence that they always
duplicate the "upvars" (aka captures). All captures are permanently
allocated in the future, even if moved. We can be mindful when writing
futures to only capture as little as possible.
TlsStream is massive. Needs boxing so it doesn't contribute to the above
issue.
## Measurements from `top-type-sizes`:
### Before
```
10328 {async block@proxy::proxy::task_main::{closure#0}::{closure#0}} align=8
6120 {async fn body of proxy::proxy::handle_client<proxy::protocol2::ChainRW<tokio::net::TcpStream>>()} align=8
```
### After
```
4040 {async block@proxy::proxy::task_main::{closure#0}::{closure#0}}
4704 {async fn body of proxy::proxy::handle_client<proxy::protocol2::ChainRW<tokio::net::TcpStream>>()} align=8
```
## Problem
We need gRPC support in Pagebench to benchmark the new gRPC Pageserver
implementation.
Touches #11728.
## Summary of changes
Adds a `Client` trait to make the client transport swappable, and a gRPC
client via a `--protocol grpc` parameter. This must also specify the
connstring with the gRPC port:
```
pagebench get-page-latest-lsn --protocol grpc --page-service-connstring grpc://localhost:51051
```
The client is implemented using the raw Tonic-generated gRPC client, to
minimize client overhead.
## Problem
The page service logic asserts that a tracing span is present with
tenant/timeline/shard IDs. An initial gRPC page service implementation
thus requires a tracing span.
Touches https://github.com/neondatabase/neon/issues/11728.
## Summary of changes
Adds an `ObservabilityLayer` middleware that generates a tracing span
and decorates it with IDs from the gRPC metadata.
This is a minimal implementation to address the tracing span assertion.
It will be extended with additional observability in later PRs.
## Problem
If the wal receiver is cancelled, there's a 50% chance that it will
ingest yet more WAL.
## Summary of Changes
Always check cancellation first.
Precursor to https://github.com/neondatabase/cloud/issues/28333.
We want per-endpoint configuration for rate limits, which will be
distributed via the `GetEndpointAccessControl` API. This lays some of
the ground work.
1. Allow the endpoint rate limiter to accept a custom leaky bucket
config on check.
2. Remove the unused auth rate limiter, as I don't want to think about
how it fits into this.
3. Refactor the caching of `GetEndpointAccessControl`, as it adds
friction for adding new cached data to the API.
That third one was rather large. I couldn't find any way to split it up.
The core idea is that there's now only 2 cache APIs.
`get_endpoint_access_controls` and `get_role_access_controls`.
I'm pretty sure the behaviour is unchanged, except I did a drive by
change to fix#8989 because it felt harmless. The change in question is
that when a password validation fails, we eagerly expire the role cache
if the role was cached for 5 minutes. This is to allow for edge cases
where a user tries to connect with a reset password, but the cache never
expires the entry due to some redis related quirk (lag, or
misconfiguration, or cplane error)
libs/pqproto is designed for safekeeper/pageserver with maximum
throughput.
proxy only needs it for handshakes/authentication where throughput is
not a concern but memory efficiency is. For this reason, we switch to
using read_exact and only allocating as much memory as we need to.
All reads return a `&'a [u8]` instead of a `Bytes` because accidental
sharing of bytes can cause fragmentation. Returning the reference
enforces all callers only hold onto the bytes they absolutely need. For
example, before this change, `pqproto` was allocating 8KiB for the
initial read `BytesMut`, and proxy was holding the `Bytes` in the
`StartupMessageParams` for the entire connection through to passthrough.
## Problem
Release pipeline failing due to some tools cannot be installed.
## Summary of changes
Install with `--locked`.
Signed-off-by: Alex Chi Z <chi@neon.tech>
The expected operating range for the production NVMe drives is
in the range of 50 to 250us.
The bucket boundaries before this PR were not well suited
to reason about the utilization / queuing / latency variability
of those devices.
# Performance
There was some concern about perf impact of having so many buckets,
considering the impl does a linear search on each observe().
I added a benchmark and measured on relevant machines.
In any way, the PR is 40 buckets, so, won't make a meaningful
difference on production machines (im4gn.2xlarge),
going from 30ns -> 35ns.
## Problem
There's a bunch of TODOs in the import code.
## Summary of changes
1. Bound max import byte range to 128MiB. This might still be too high,
given the default job concurrency, but it needs to be balanced with
going back and forth to S3.
2. Prevent unsigned overflow when determining key range splits for
concurrent jobs
3. Use sharded ranges to estimate task size when splitting jobs
4. Bubble up errors that we might hit due to invalid data in the bucket
back to the storage controller.
5. Tweak the import bucket S3 client configuration.
## Problem
I noticed a small percentage of flakes on some import tests.
They were all instances of the storage controller being too eager on the
finalization.
As a refresher: the pageserver notifies the storage controller that it's
done from the import task
and the storage controller has to call back into it in order to finalize
the import. The pageserver
checks that the import task is done before serving that request. Hence,
we can get this race.
In practice, this has no impact since the storage controller will simply
retry.
## Summary of changes
Allow list such cases
This patch is a fixup for
- https://github.com/neondatabase/neon/pull/6788
Background
----------
That PR 6788 added artificial advancement of `disk_consistent_lsn`
and `remote_consistent_lsn` for shards that weren't written to
while other shards _were_ written to.
See the PR description for more context.
At the time of that PR, Pageservers shards were doing WAL filtering.
Nowadays, the WAL filtering happens in Safekeepers.
Shards learn about the WAL gaps via
`InterpretedWalRecords::next_record_lsn`.
The Bug
-------
That artificial advancement code also runs if the flush failed.
So, we advance the disk_consistent_lsn / remote_consistent_lsn,
without having the corresponding L0 to the `index_part.json`.
The frozen layer remains in the layer map until detach,
so we continue to serve data correctly.
We're not advancing flush loop variable `flushed_to_lsn` either,
so, subsequent flush requests will retry the flush and repair the
situation if they succeed.
But if there aren't any successful retries, eventually the tenant
will be detached and when it is attached somewhere else, the
`index_part.json` and therefore layer map...
1. ... does not contain the frozen layer that failed to flush and
2. ... won't re-ingest that WAL either because walreceiver
starts up with the advanced disk_consistent_lsn/remote_consistent_lsn.
The result is that the read path will have a gap in the reconstruct
data for the keys whose modifications were lost, resulting in
a) either walredo failure
b) or an incorrect page@lsn image if walredo doesn't error.
The Fix
-------
The fix is to only do the artificial advancement if `result.is_ok()`.
Misc
----
As an aside, I took some time to re-review the flush loop and its
callers.
I found one more bug related to error handling that I filed here:
- https://github.com/neondatabase/neon/issues/12025
## Problem
## Summary of changes
## Problem
Checking the most recent state of pageservers was insufficient to
evaluate whether another pageserver may read in a particular generation,
since the latest state might mask some earlier AttachedSingle state.
Related: https://github.com/neondatabase/neon/issues/11348
## Summary of changes
- Maintain a history of all attachments
- Write out explicit rules for when a pageserver may read
## Problem
Part of #11813. This pull request adds misc observability improvements
for the functionality.
## Summary of changes
* Info span for the PostHog feature background loop.
* New evaluate feature flag API.
* Put the request error into the error message.
* Log when feature flag gets updated.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
I have a hypothesis that import might be using lower number of jobs than
max for the VM, where the job is running. This change will help finding
this out from logs
## Summary of changes
Added logging of number of jobs, which is passed into both `pg_dump` and
`pg_restore`
Adds two metrics to the storcon that are related to the safekeeper
reconciler:
* `storage_controller_safkeeper_reconciles_queued` to indicate currrent
queue depth
* `storage_controller_safkeeper_reconciles_complete` to indicate the
number of complete reconciles
Both metrics operate on a per-safekeeper basis (as reconcilers run on a
per-safekeeper basis too).
These metrics mirror the `storage_controller_pending_reconciles` and
`storage_controller_reconcile_complete` metrics, although those are not
scoped on a per-pageserver basis but are global for the entire storage
controller.
Part of #11670
## Problem
Disk usage eviction isn't sensitive to layers of imported timelines.
## Summary of changes
Hook importing timelines up into eviction and add a test for it.
I don't think we need any special eviction logic for this. These layers
will all be visible and
their access time will be their creation time. Hence, we'll remove
covered layers first
and get to the imported layers if there's still disk pressure.
## Problem
Importing timelines can't currently be deleted. This is problematic
because:
1. Cplane cannot delete failed imports and we leave the timeline behind.
2. The flow does not support user driven cancellation of the import
## Summary of changes
On the pageserver: I've taken the path of least resistance, extended
`TimelineOrOffloaded`
with a new variant and added handling in the right places. I'm open to
thoughts here,
but I think it turned out better than I was envisioning.
On the storage controller: Again, fairly simple business: when a DELETE
timeline request is
received, we remove the import from the DB and stop any finalization
tasks/futures. In order
to stop finalizations, we track them in-memory. For each finalizing
import, we associate a gate
and a cancellation token.
Note that we delete the entry from the database before cancelling any
finalizations. This is such
that a concurrent request can't progress the import into finalize state
and race with the deletion.
This concern about deleting an import with on-going finalization is
theoretical in the near future.
We are only going to delete importing timelines after the storage
controller reports the failure to
cplane. Alas, the design works for user driven cancellation too.
Closes https://github.com/neondatabase/neon/issues/11897
## Summary
The optimiser background loop could get delayed a lot by waiting for
timeouts trying to talk to offline nodes.
Fixes: #12056
## Solution
- Skip offline nodes in `get_top_tenant_shards`
Link to Devin run:
https://app.devin.ai/sessions/065afd6756734d33bbd4d012428c4b6e
Requested by: John Spray (john@neon.tech)
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: John Spray <john@neon.tech>
## Problem
Temporarily reduce the concurrency of gc-compaction to 1 job at a time.
We are going to roll out in the largest AWS region next week. Having one
job running at a time makes it easier to identify what tenant causes
problem if it's not running well and pause gc-compaction for that
specific tenant.
(We can make this configurable via pageserver config in the future!)
## Summary of changes
Reduce `CONCURRENT_GC_COMPACTION_TASKS` from 2 to 1.
Signed-off-by: Alex Chi Z <chi@neon.tech>
The `test_storcon_create_delete_sk_down` test is still flaky. This test
addresses two possible causes for flakiness. both causes are related to
deletion racing with `pull_timeline` which hasn't finished yet.
* the first cause is timeline deletion racing with `pull_timeline`:
* the first deletion attempt doesn't contain the line because the
timeline doesn't exist yet
* the subsequent deletion attempts don't contain it either, only a note
that the timeline is already deleted.
* so this patch adds the note that the timeline is already deleted to
the regex
* the second cause is about tenant deletion racing with `pull_timeline`:
* there were no tenant specific tombstones so if a tenant was deleted,
we only added tombstones for the specific timelines being deleted, not
for the tenant itself.
* This patch changes this, so we now have tenant specific tombstones as
well as timeline specific ones, and creation of a timeline checks both.
* we also don't see any retries of the tenant deletion in the logs. once
it's done it's done. so extend the regex to contain the tenant deletion
message as well.
One could wonder why the regex and why not using the API to check
whether the timeline is just "gone". The issue with the API is that it
doesn't allow one to distinguish between "deleted" and "has never
existed", and latter case might race with `pull_timeline`. I.e. the
second case flakiness helped in the discovery of a real bug (no tenant
tombstones), so the more precise check was helpful.
Before, I could easily reproduce 2-9 occurences of flakiness when
running the test with an additional `range(128)` parameter (i.e. 218
times 4 times). With this patch, I ran it three times, not a single
failure.
Fixes#11838
## Problem
Import planning takes a job size limit as its input. Previously, the job
size came from a pageserver config field. This field may change while
imports are in progress. If this happens, plans will no longer be
identical and the import would fail permanently.
## Summary of Changes
Bake the job size into the import progress reported to the storage
controller. For new imports, use the value from the pagesever config,
and, for existing imports, use the value present in the shard progress.
This value is identical for all shards, but we want it to be versioned
since future versions of the planner might split the jobs up
differently. Hence, it ends up in `ShardImportProgress`.
Closes https://github.com/neondatabase/neon/issues/11983
## Problem
Previous attempt https://github.com/neondatabase/neon/pull/10548 caused
some issues in staging and we reverted it. This is a re-attempt to
address https://github.com/neondatabase/neon/issues/11063.
Currently we create image layers at latest record LSN. We would create
"future image layers" (i.e., image layers with LSN larger than disk
consistent LSN) that need special handling at startup. We also waste a
lot of read operations to reconstruct from L0 layers while we could have
compacted all of the L0 layers and operate on a flat level of historic
layers.
## Summary of changes
* Run repartition at L0-L1 boundary.
* Roll out with feature flags.
* Piggyback a change that downgrades "image layer creating below
gc_cutoff" to debug level.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
There is a new API that I plan to use. We generate client from the spec
so it should be in the spec
## Summary of changes
Document the existing API in openAPI format
## Problem
Currently, we collect metrics of what extensions are installed on
computes at start up time. We do not have a mechanism that does this at
runtime.
## Summary of changes
Added a background thread that queries all DBs at regular intervals and
collects a list of installed extensions.
## Problem
Part of https://github.com/neondatabase/neon/issues/11813
## Summary of changes
* Support evaluate boolean flags.
* Add docs on how to handle errors.
* Add test cases based on real PostHog config.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We have some gaps in our traces. This indicates missing spans.
## Summary of changes
This PR adds two new spans:
* WAIT_EXECUTOR: time a batched request spends in the batch waiting to
be picked up
* FLUSH_RESPONSE: time a get page request spends flushing the response
to the compute
## Problem
The page API gRPC errors need a few tweaks to integrate better with the
GetPage machinery.
Touches https://github.com/neondatabase/neon/issues/11728.
## Summary of changes
* Add `GetPageStatus::InternalError` for internal server errors.
* Rename `GetPageStatus::Invalid` to `InvalidRequest` for clarity.
* Rename `status` and `GetPageStatus` to `status_code` and
`GetPageStatusCode`.
* Add an `Into<tonic::Status>` implementation for `ProtocolError`.
Some tests still explicitly specify version 3 of the safekeeper
walproposer protocol. Remove the explicit opt in from the tests as v3 is
the default now since #11518.
We don't touch the places where a test exercises both v2 and v3. Those
we leave for #12021.
Part of https://github.com/neondatabase/neon/issues/10326
## Problem
Test coverage of timeline imports is lacking.
## Summary of changes
This PR adds a chaos import test. It runs an import while injecting
various chaos events
in the environment. All the commits that follow the test fix various
issues that were surfaced by it.
Closes https://github.com/neondatabase/neon/issues/10191
## Problem
The regression test for the extension online_advisor fails on the
staging instance due to a lack of permission to alter the database.
## Summary of changes
A script was added to work around this problem.
---------
Co-authored-by: Alexander Lakhin <alexander.lakhin@neon.tech>
In order to enable TLS connections between computes and safekeepers, we
need to provide the control plane with a way to configure the various
libpq keyword parameters, sslmode and sslrootcert. neon.safekeepers is a
comma separated list of safekeepers formatted as host:port, so isn't
available for extension in the same way that neon.pageserver_connstring
is. This could be remedied in a future PR.
Part-of: https://github.com/neondatabase/cloud/issues/25823
Link:
https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS
Signed-off-by: Tristan Partin <tristan@neon.tech>
Support timeline creations on the storage controller to opt out from
their creation on the safekeepers, introducing the read-only timelines
concept. Read only timelines:
* will never receive WAL of their own, so it's fine to not create them
on the safekeepers
* the property is non-transitive. children of read-only timelines aren't
neccessarily read-only themselves.
This feature can be used for snapshots, to prevent the safekeepers from
being overloaded by empty timelines that won't ever get written to. In
the current world, this is not a problem, because timelines are created
implicitly by the compute connecting to a safekeeper that doesn't have
the timeline yet. In the future however, where the storage controller
creates timelines eagerly, we should watch out for that.
We represent read-only timelines in the storage controller database so
that we ensure that they never touch the safekeepers at all. Especially
we don't want them to cause a mess during the importing process of the
timelines from the cplane to the storcon database.
In a hypothetical future where we have a feature to detach timelines
from safekeepers, we'll either need to find a way to distinguish the
two, or if not, asking safekeepers to list the (empty) timeline prefix
and delete everything from it isn't a big issue either.
This patch will unconditionally hit the new safekeeper timeline creation
path for read-only timelines, without them needing the
`--timelines-onto-safekeepers` flag enabled. This is done because it's
lower risk (no safekeepers or computes involved at all) and gives us
some initial way to verify at least some parts of that code in prod.
https://github.com/neondatabase/cloud/issues/29435https://github.com/neondatabase/neon/issues/11670
Previously we were using project-id/endpoint-id as SYSLOGTAG, which has
a
limit of 32 characters, so the endpoint-id got truncated.
The output is now in RFC5424 format, where the message is json encoded
with additional metadata `endpoint_id` and `project_id`
Also as pgaudit logs multiline messages, we now detect this by parsing
the timestamp in the specific format, and consider non-matching lines to
belong in the previous log message.
Using syslog structured-data would be an alternative, but leaning
towards json
due to being somewhat more generic.
## Problem
part of https://github.com/neondatabase/neon/issues/11813
## Summary of changes
* Integrate feature store with tenant structure.
* gc-compaction picks up the current strategy from the feature store.
* We only log them for now for testing purpose. They will not be used
until we have more patches to support different strategies defined in
PostHog.
* We don't support property-based evaulation for now; it will be
implemented later.
* Evaluating result of the feature flag is not cached -- it's not
efficient and cannot be used on hot path right now.
* We don't report the evaluation result back to PostHog right now.
I plan to enable it in staging once we get the patch merged.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We see unexpected basebackup error alerts in the alert channel.
https://github.com/neondatabase/neon/pull/11778 only fixed the alerts
for shutdown errors. However, another path is that tenant shutting down
while waiting LSN -> WaitLsnError::BadState -> QueryError::Reconnect.
Therefore, the reconnect error should also be discarded from the
ok/error counter.
## Summary of changes
Do not increase ok/err counter for reconnect errors.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We didn't test the h3 extension in our test suite.
## Summary of changes
Added tests for h3 and h3-postgis extensions
Includes upgrade test for h3
---------
Co-authored-by: Tristan Partin <tristan@neon.tech>
## Problem
For the gRPC Pageserver API, we should convert the Protobuf types to
stricter, canonical Rust types.
Touches https://github.com/neondatabase/neon/issues/11728.
## Summary of changes
Adds Rust domain types that mirror the Protobuf types, with conversion
and validation.
## Problem
We need authentication for the gRPC server.
Requires #11972.
Touches #11728.
## Summary of changes
Add two request interceptors that decode the tenant/timeline/shard
metadata and authenticate the JWT token against them.
## Problem
We want to expose the page service over gRPC, for use with the
communicator.
Requires #11995.
Touches #11728.
## Summary of changes
This patch wires up a gRPC server in the Pageserver, using Tonic. It
does not yet implement the actual page service.
* Adds `listen_grpc_addr` and `grpc_auth_type` config options (disabled
by default).
* Enables gRPC by default with `neon_local`.
* Stub implementation of `page_api.PageService`, returning unimplemented
errors.
* gRPC reflection service for use with e.g. `grpcurl`.
Subsequent PRs will implement the actual page service, including
authentication and observability.
Notably, TLS support is not yet implemented. Certificate reloading
requires us to reimplement the entire Tonic gRPC server.
## Problem
For #11992 I realised we need to get the type info before executing the
query. This is important to know how to decode rows with custom types,
eg the following query:
```sql
CREATE TYPE foo AS ENUM ('foo','bar','baz');
SELECT ARRAY['foo'::foo, 'bar'::foo, 'baz'::foo] AS data;
```
Getting that to work was harder that it seems. The original
tokio-postgres setup has a split between `Client` and `Connection`,
where messages are passed between. Because multiple clients were
supported, each client message included a dedicated response channel.
Each request would be terminated by the `ReadyForQuery` message.
The flow I opted to use for parsing types early would not trigger a
`ReadyForQuery`. The flow is as follows:
```
PARSE "" // parse the user provided query
DESCRIBE "" // describe the query, returning param/result type oids
FLUSH // force postgres to flush the responses early
// wait for descriptions
// check if we know the types, if we don't then
// setup the typeinfo query and execute it against each OID:
PARSE typeinfo // prepare our typeinfo query
DESCRIBE typeinfo
FLUSH // force postgres to flush the responses early
// wait for typeinfo statement
// for each OID we don't know:
BIND typeinfo
EXECUTE
FLUSH
// wait for type info, might reveal more OIDs to inspect
// close the typeinfo query, we cache the OID->type map and this is kinder to pgbouncer.
CLOSE typeinfo
// finally once we know all the OIDs:
BIND "" // bind the user provided query - already parsed - to the user provided params
EXECUTE // run the user provided query
SYNC // commit the transaction
```
## Summary of changes
Please review commit by commit. The main challenge was allowing one
query to issue multiple sub-queries. To do this I first made sure that
the client could fully own the connection, which required removing any
shared client state. I then had to replace the way responses are sent to
the client, by using only a single permanent channel. This required some
additional effort to track which query is being processed. Lastly I had
to modify the query/typeinfo functions to not issue `sync` commands, so
it would fit into the desired flow above.
To note: the flow above does force an extra roundtrip into each query. I
don't know yet if this has a measurable latency overhead.
## Problem
- Benchmark periodic pagebench had inconsistent benchmarking results
even when run with the same commit hash.
Hypothesis is this was due to running on dedicated but virtualized EC
instance with varying CPU frequency.
- the dedicated instance type used for the benchmark is quite "old" and
we increasingly get `An error occurred (InsufficientInstanceCapacity)
when calling the StartInstances operation (reached max retries: 2):
Insufficient capacity.`
- periodic pagebench uses a snapshot of pageserver timelines to have the
same layer structure in each run and get consistent performance.
Re-creating the snapshot was a painful manual process (see
https://github.com/neondatabase/cloud/issues/27051 and
https://github.com/neondatabase/cloud/issues/27653)
## Summary of changes
- Run the periodic pagebench on a custom hetzner GitHub runner with
large nvme disk and governor set to defined perf profile
- provide a manual dispatch option for the workflow that allows to
create a new snapshot
- keep the manual dispatch option to specify a commit hash useful for
bi-secting regressions
- always use the newest created snapshot (S3 bucket uses date suffix in
S3 key, example
`s3://neon-github-public-dev/performance/pagebench/shared-snapshots-2025-05-17/`
- `--ignore`
`test_runner/performance/pageserver/pagebench/test_pageserver_max_throughput_getpage_at_latest_lsn.py`
in regular benchmarks run for each commit
- improve perf copying snapshot by using `cp` subprocess instead of
traversing tree in python
## Example runs with code in this PR:
- run which creates new snapshot
https://github.com/neondatabase/neon/actions/runs/15083408849/job/42402986376#step:19:55
- run which uses latest snapshot
-
https://github.com/neondatabase/neon/actions/runs/15084907676/job/42406240745#step:11:65
## Problem
We're about to implement a gRPC interface for Pageserver. Let's upgrade
Tonic first, to avoid a more painful migration later. It's currently
only used by storage-broker.
Touches #11728.
## Summary of changes
Upgrade Tonic 0.12.3 → 0.13.1. Also opportunistically upgrade Prost
0.13.3 → 0.13.5. This transitively pulls in Indexmap 2.0.1 → 2.9.0, but
it doesn't appear to be used in any particularly critical code paths.
## Problem
See https://github.com/neondatabase/neon/issues/11997
This guard prevents race condition with pump prefetch state (initiated
by timeout).
Assert checks that prefetching is also done under guard.
But prewarm knows nothing about it.
## Summary of changes
Pump prefetch state only in regular backends.
Prewarming is done by background workers now.
Also it seems to have not sense to pump prefetch state in any other
background workers: parallel executors, vacuum,... because they are
short living and can not leave unconsumed responses in socket.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Detect problems with Postgres optimiser: lack of indexes and statistics
## Summary of changes
https://github.com/knizhnik/online_advisor
Add online_advistor extension to docker image
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
https://github.com/neondatabase/neon/pull/11988 waits only for max
~200ms, so we still see failures, which self-resolve after several
operation retries.
## Summary of changes
Change it to waiting for at least 5 seconds, starting with 2 ms sleep
between iterations and x2 sleep on each next iteration. It could be that
it's not a problem with a slow `rsyslog` start, but a longer wait won't
hurt. If it won't start, we should debug why `inittab` doesn't start it,
or maybe there is another problem.
Add retry loop around waiting for rsyslog start
## Problem
## Summary of changes
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@garret.ru>
Co-authored-by: Matthias van de Meent <matthias@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Basebackup cache is on the hot path of compute startup and is generated
on every request (may be slow).
- Issue: https://github.com/neondatabase/cloud/issues/29353
## Summary of changes
- Add `BasebackupCache` which stores basebackups on local disk.
- Basebackup prepare requests are triggered by
`XLOG_CHECKPOINT_SHUTDOWN` records in the log.
- Limit the size of the cache by number of entries.
- Add `basebackup_cache_enabled` feature flag to TenantConfig.
- Write tests for the cache
## Not implemented yet
- Limit the size of the cache by total size in bytes
---------
Co-authored-by: Aleksandr Sarantsev <aleksandr@neon.tech>
## Problem
For billing, we'd like per-branch consumption metrics.
Requires https://github.com/neondatabase/neon/pull/11984.
Resolves https://github.com/neondatabase/cloud/issues/28155.
## Summary of changes
This patch adds two new consumption metrics:
* `written_size_since_parent`: `written_size - ancestor_lsn`
* `pitr_history_size_since_parent`: `written_size - max(pitr_cutoff,
ancestor_lsn)`
Note that `pitr_history_size_since_parent` will not be emitted until the
PITR cutoff has been computed, and may or may not increase ~immediately
when a user increases their PITR window (depending on how much history
we have available and whether the tenant is restarted/migrated).
## Problem
When testing local proxy the auth-endpoint password shows up in command
line and log
```bash
RUST_LOG=proxy LOGFMT=text cargo run --release --package proxy --bin proxy --features testing -- \
--auth-backend postgres \
--auth-endpoint 'postgresql://postgres:secret_password@127.0.0.1:5432/postgres' \
--tls-cert server.crt \
--tls-key server.key \
--wss 0.0.0.0:4444
```
## Summary of changes
- Allow to set env variable PGPASSWORD
- fall back to use PGPASSWORD env variable when auth-endpoint does not
contain password
- remove auth-endpoint password from logs in `--features testing` mode
Example
```bash
export PGPASSWORD=secret_password
RUST_LOG=proxy LOGFMT=text cargo run --package proxy --bin proxy --features testing -- \
--auth-backend postgres \
--auth-endpoint 'postgresql://postgres@127.0.0.1:5432/postgres' \
--tls-cert server.crt \
--tls-key server.key \
--wss 0.0.0.0:4444
```
## Problem
It is not currently possible to disambiguate a timeline with an
uninitialized PITR cutoff from one that was created within the PITR
window -- both of these have `GcCutoffs::time == Lsn(0)`. For billing
metrics, we need to disambiguate these to avoid accidentally billing the
entire history when a tenant is initially loaded.
Touches https://github.com/neondatabase/cloud/issues/28155.
## Summary of changes
Make `GcCutoffs::time` an `Option<Lsn>`, and only set it to `Some` when
initialized. A `pitr_interval` of 0 will yield `Some(last_record_lsn)`.
This PR takes a conservative approach, and mostly retains the old
behavior of consumers by using `unwrap_or_default()` to yield 0 when
uninitialized, to avoid accidentally introducing bugs -- except in cases
where there is high confidence that the change is beneficial (e.g. for
the `pageserver_pitr_history_size` Prometheus metric and to return early
during GC).
## Problem
Hitting max_client_conn from pgbouncer would lead to invalidation of the
conn info cache.
Customers would hit the limit on wake_compute.
## Summary of changes
`should_retry_wake_compute` detects this specific error from pgbouncer
as non-retriable,
meaning we won't try to wake up the compute again.
## Problem
When using an incorrect endpoint string - `"localhost:4317"`, it's a
runtime error, but it can be a config error
- Closes: https://github.com/neondatabase/neon/issues/11394
## Summary of changes
Add config parse time check via `request::Url::parse` validation.
---------
Co-authored-by: Aleksandr Sarantsev <ephemeralsad@gmail.com>
#11962
Please review each commit separately.
Each commit is rather small in goal. The overall goal of this PR is to
keep the behaviour identical, but shave away small inefficiencies here
and there.
## Problem
See
Discussion:
https://neondb.slack.com/archives/C033RQ5SPDH/p1746645666075799
Issue: https://github.com/neondatabase/cloud/issues/28609
Relation size cache is not correctly updated at PS in case of replicas.
## Summary of changes
1. Have two caches for relation size in timeline:
`rel_size_primary_cache` and `rel_size_replica_cache`.
2. `rel_size_primary_cache` is actually what we have now. The only
difference is that it is not updated in `get_rel_size`, only by WAL
ingestion
3. `rel_size_replica_cache` has limited size (LruCache) and it's key is
`(Lsn,RelTag)` . It is updated in `get_rel_size`. Only strict LSN
matches are accepted as cache hit.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
In the escaping path we were checking that `${tag}$` or `${outer_tag}$`
are present in the string, but that's not enough, as original string
surrounded by `$` can also form a 'tag', like `$x$xx$x$`, which is fine
on it's own, but cannot be used in the string escaped with `$xx$`.
## Summary of changes
Remove `$` from the checks, just check if `{tag}` or `{outer_tag}` are
present. Add more test cases and change the catalog test to stress the
`drop_subscriptions_before_start: true` path as well.
Fixes https://github.com/neondatabase/cloud/issues/29198
## Problem
The gRPC page service API will require decoupling the `PageHandler` from
the libpq protocol implementation. As preparation for this, avoid
passing in the entire server config to `PageHandler`, and instead
explicitly pass in the relevant fields.
Touches https://github.com/neondatabase/neon/issues/11728.
## Summary of changes
* Change `PageHandler` to take a `GetVectoredConcurrentIo` instead of
the entire config.
* Change `IoConcurrency::spawn_from_conf` to take a
`GetVectoredConcurrentIo`.
## Problem
A binary Protobuf schema descriptor can be used to expose an API
reflection service, which in turn allows convenient usage of e.g.
`grpcurl` against the gRPC server.
Touches #11728.
## Summary of changes
* Generate a binary schema descriptor as
`pageserver_page_api::proto::FILE_DESCRIPTOR_SET`.
* Opportunistically rename the Protobuf package from `page_service` to
`page_api`.
## Problem
For the [communicator
project](https://github.com/neondatabase/company_projects/issues/352),
we want to move to gRPC for the page service protocol.
Touches #11728.
## Summary of changes
This patch adds an experimental gRPC Protobuf schema for the page
service. It is equivalent to the current page service, but with several
improvements, e.g.:
* Connection multiplexing.
* Reduced head-of-line blocking.
* Client-side batching.
* Explicit tenant shard routing.
* GetPage request classification (normal vs. prefetch).
* Explicit rate limiting ("slow down" response status).
The API is exposed as a new `pageserver/page_api` package. This is
separate from the `pageserver_api` package to reduce the dependency
footprint for the communicator. The longer-term plan is to also split
out e.g. the WAL ingestion service to a separate gRPC package, e.g.
`pageserver/wal_api`.
Subsequent PRs will: add Rust domain types for the Protobuf types,
expose a gRPC server, and implement the page service.
Preliminary prototype benchmarks of this gRPC API is within 10% of
baseline libpq performance. We'll do further benchmarking and
optimization as the implementation lands in `main` and is deployed to
staging.
## Problem
Currently the `logger` library throws annoying deprecation warnings:
```python
DeprecationWarning: The 'warn' method is deprecated, use 'warning' instead
```
## Summary of changes
This small PR resolves the annoying deprecation warnings by migrating to
`.warning` as suggested.
Signed-off-by: Emmanuel Ferdman <emmanuelferdman@gmail.com>
You still need to provide a max size up-front, but memory is only
allocated for the portion that is in use.
The module is currently unused, but will be used by the new compute
communicator project, in the neon Postgres extension. See
https://github.com/neondatabase/neon/issues/11729
---------
Co-authored-by: Erik Grinaker <erik@neon.tech>
There were some incompatible changes. Most churn was from switching from
the now-deprecated fcntl:flock() function to
fcntl::Flock::lock(). The new function returns a guard object, while
with the old function, the lock was associated directly with the file
descriptor.
It's good to stay up-to-date in general, but the impetus to do this now
is that in https://github.com/neondatabase/neon/pull/11929, I want to
use some functions that were added only in the latest version of 'nix',
and it's nice to not have to build multiple versions. (Although,
different versions of 'nix' are still pulled in as indirect dependencies
from other packages)
## Problem
There's a misspelled flag value alias that's not really used anywhere.
## Summary of changes
Fix the alias and make aliases the official flag values and keep old
values as aliases.
Also rename enum variant. No need for it to carry the version now.
Greetings! Please add `w=1` to github url when viewing diff
(sepcifically `wal_backup.rs`)
## Problem
This PR is aimed at addressing the remaining work of #8200. Namely,
removing static usage of remote storage in favour of arc. I did not opt
to pass `Arc<RemoteStorage>` directly since it is actually
`Optional<RemoteStorage>` as it is not necessarily always configured. I
wanted to avoid having to pass `Arc<Optional<RemoteStorage>>` everywhere
with individual consuming functions likely needing to handle unwrapping.
Instead I've added a `WalBackup` struct that holds
`Optional<RemoteStorage>` and handles initialization/unwrapping
RemoteStorage internally. wal_backup functions now take self and
`Arc<WalBackup>` is passed as a dependency through the various consumers
that need it.
## Summary of changes
- Add `WalBackup` that holds `Optional<RemoteStorage>` and handles
initialization and unwrapping
- Modify wal_backup functions to take `WalBackup` as self (Add `w=1` to
github url when viewing diff here)
- Initialize `WalBackup` in safekeeper root
- Store `Arc<WalBackup>` in `GlobalTimelineMap` and pass and store in
each Timeline as loaded
- use `WalBackup` through Timeline as needed
## Refs
- task to remove global variables
https://github.com/neondatabase/neon/issues/8200
- drive-by fixes https://github.com/neondatabase/neon/issues/11501
by turning the panic reported there into an error `remote storage not
configured`
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
We keep the practice of keeping the compiler up to date, pointing to the
latest release. This is done by many other projects in the Rust
ecosystem as well.
The 1.87.0 release marks 10 years of Rust.
[Announcement blog
post](https://blog.rust-lang.org/2025/05/15/Rust-1.87.0/)
Prior update was in #11431
This PR commits the benchmarks I ran to qualify concurrent IO before we
released it.
Changes:
- Add `l0stack` fixture; a reusable abstraction for creating a stack of
L0 deltas
each of which has 1 Value::Delta per page.
- Such a stack of L0 deltas is a good and understandable demo for
concurrent IO
because to reconstruct any page, $layer_stack_height` Values need to be
read.
Before concurrent IO, the reads were sequential.
With concurrent IO, they are executed concurrently.
- So, switch `test_latency` to use the l0stack.
- Teach `pagebench`, which is used by `test_latency`, to limit itself to
the blocks of the relation created by the l0stack abstraction.
- Additional parametrization of `test_latency` over dimensions
`ps_io_concurrency,l0_stack_height,queue_depth`
- Use better names for the tests to reflect what they do, leave
interpretation of the (now quite high-dimensional) results to the reader
- `test_{throughput => postgres_seqscan}`
- `test_{latency => random_reads}`
- Cut down on permutations to those we use in production. Runtime is
about 2min.
Refs
- concurrent IO epic https://github.com/neondatabase/neon/issues/9378
- batching task: fixes https://github.com/neondatabase/neon/issues/9837
---------
Co-authored-by: Peter Bendel <peterbendel@neon.tech>
## Problem
Imports don't support schema evolution nicely. If we want to change the
stuff we keep in storcon,
we'd have to carry the old cruft around.
## Summary of changes
Version import progress. Note that the import progress version
determines the version of the import
job split and execution. This means that we can also use it as a
mechanism for deploying new import
implementations in the future.
## Problem
Timeline imports do not have progress checkpointing. Any time that the
tenant is shut-down, all progress is lost
and the import restarts from the beginning when the tenant is
re-attached.
## Summary of changes
This PR adds progress checkpointing.
### Preliminaries
The **unit of work** is a `ChunkProcessingJob`. Each
`ChunkProcessingJob` deals with the import for a set of key ranges. The
job split is done by using an estimation of how many pages each job will
produce.
The planning stage must be **pure**: given a fixed set of contents in
the import bucket, it will always yield the same plan. This property is
enforced by checking that the hash of the plan is identical when
resuming from a checkpoint.
The storage controller tracks the progress of each shard in the import
in the database in the form of the **latest
job** that has has completed.
### Flow
This is the high level flow for the happy path:
1. On the first run of the import task, the import task queries storcon
for the progress and sees that none is recorded.
2. Execute the preparatory stage of the import
3. Import jobs start running concurrently in a `FuturesOrdered`. Every
time the checkpointing threshold of jobs has been reached, notify the
storage controller.
4. Tenant is detached and re-attached
5. Import task starts up again and gets the latest progress checkpoint
from the storage controller in the form of a job index.
6. The plan is computed again and we check that the hash matches with
the original plan.
7. Jobs are spawned from where the previous import task left off. Note
that we will not report progress after the completion of each job, so
some jobs might run twice.
Closes https://github.com/neondatabase/neon/issues/11568
Closes https://github.com/neondatabase/neon/issues/11664
## Problem
Import up-calls did not enforce the usage of the latest generation. The
import might have finished in one previous generation, but not in the
latest one. Hence, the controller might try to activate a timeline
before it is ready. In theory, that would be fine, but it's tricky to
reason about.
## Summary of Changes
Pageserver provides the current generation in the upcall to the storage
controller and the later validates the generation. If the generation is
stale, we return an error which stops progress of the import job. Note
that the import job will retry the upcall until the stale location is
detached.
I'll add some proper tests for this as part of the [checkpointing
PR](https://github.com/neondatabase/neon/pull/11862).
Closes https://github.com/neondatabase/neon/issues/11884
## Problem
```
Error when evaluating 'strategy' for job 'build-pgxn'. neondatabase/neon/.github/workflows/build-macos.yml@7907a9e2bf898f3d22b98d9d4d2c6ffc4d480fc3 (Line: 45, Col: 27): Matrix vector 'postgres-version' does not contain any values
```
See
https://github.com/neondatabase/neon/actions/runs/15039594216/job/42268015127?pr=11929
## Summary of changes
- Fix typo: `.chnages` -> `.changes`
- Ensure JSON is JSON by moving step output to env variable
## Problem
close https://github.com/neondatabase/neon/issues/11159 ; we get
occasional wrong deletions of layer files being used and errors in
staging. This patch fixed it.
Example errors:
```
Timeline metadata errors: ["index_part.json contains a layer .... (shard 0000) that is not present in remote storage (layer_is_l0: false) with error: Failed to download a remote file: s3 head object\n\nCaused by:\n 0: dispatch failure\n 1: timeout\n 2: error trying to connect: HTTP connect timeout occurred after 3.1s\n
```
This error should not be fired because the file could exist, but we
cannot know if it exists due to head request failure.
## Summary of changes
Only generate cannot find layer errors when the head_object return type
is `NotFound`.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Use the current production config for batching & concurrent IO.
Remove the permutation testing for unit tests from CI.
(The pageserver unit test matrix takes ~10min for debug builds).
Drive-by-fix use of `if cfg!(test)` inside crate `pageserver_api`.
It is ineffective for early-enabling new defaults for pageserver unit
tests only.
The reason is that the `test` cfg is only set for the crate under test
but not its dependencies.
So, `cargo test -p pageserver` will build `pageserver_api` with
`cfg!(test) == false`.
Resort to checking for feature flag `testing` instead, since all our
unit tests are run with `--feature testing`.
refs
- `scattered-lsn` batching has been implemented and rolled out in all
envs, cf https://github.com/neondatabase/neon/issues/10765
- preliminary for https://github.com/neondatabase/neon/pull/10466
- epic https://github.com/neondatabase/neon/issues/9377
- epic https://github.com/neondatabase/neon/issues/9378
- drive-by fix
https://neondb.slack.com/archives/C0277TKAJCA/p1746821515504219
## Problem
The regression test on extensions relied on the admin API to set the
default endpoint settings, which is not stable and requires admin
privileges. Specifically:
- The workflow was using `default_endpoint_settings` to configure
necessary PostgreSQL settings like `DateStyle`, `TimeZone`, and
`neon.allow_unstable_extensions`
- This approach was failing because the API endpoint for setting
`default_endpoint_settings` was changed (referenced in a comment as
issue #27108)
- The admin API requires special privileges.
## Summary of changes
We get rid of the admin API dependency and use ALTER DATABASE statements
instead:
**Removed the default_endpoint_settings mechanism:**
- Removed the default_endpoint_settings input parameter from the
neon-project-create action
- Removed the API call that was attempting to set these settings at the
project level
- Completely removed the default_endpoint_settings configuration from
the cloud-extensions workflow
**Added database-level settings:**
- Created a new `alter_db.sh` script that applies the same settings
directly to each test database
- Modified all extension test scripts to call this script after database
creation
## Problem
Hopefully resolves `test_gc_feedback` flakiness.
## Summary of changes
`accumulated_values` should not exceed 512MB to avoid OOM. Previously we
only use number of items, which is not a good estimation.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Lifetime of imported timelines (and implicitly the import background
task) has some shortcomings:
1. Timeline activation upon import completion is tricky. Previously, a
timeline that finished importing
after a tenant detach would not get activated and there's concerns about
the safety of activating
concurrently with shut-down.
2. Import jobs can prevent tenant shut down since they hold the tenant
gate
## Summary of Changes
Track the import tasks in memory and abort them explicitly on tenant
shutdown.
Integrate more closely with the storage controller:
1. When an import task has finished all of its jobs, it notifies the
storage controller, but **does not** mark the import as done in the
index_part. When all shards have finished importing, the storage
controller will call the `/activate_post_import` idempotent endpoint for
all of them. The handler, marks the import complete in index part,
resets the tenant if required and checks if the timeline is active yet.
2. Not directly related, but the import job now gets the starting state
from the storage controller instead of the import bucket. This paves the
way for progress checkpointing.
Related: https://github.com/neondatabase/neon/issues/11568
## Problem
It's difficult to understand where proxy spends most of cpu and memory.
## Summary of changes
Expose cpu and heap profiling handlers for continuous profiling.
neondatabase/cloud#22670
## Problem
Prefetched and LFC results are not checked in DEBUG_COMPARE_LOCAL mode
## Summary of changes
Add check for this results as well.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Bump all minor versions.
the only conflict was
src/backend/storage/smgr/smgr.c in v17
where our smgr changes conflicted with
ee578921b6
but it was trivial to resolve.
## Problem
1. Safekeeper selection on the pageserver side isn't very dynamic. Once
you connect to one safekeeper, you'll use that one for as long as the
safekeeper keeps the connection alive. In principle, we could be more
eager, since the wal receiver connection can be cancelled but we don't
do that. We wait until the "session" is done and then we pick a new SK.
2. Picking a new SK is quite conservative. We will switch if:
a. We haven't received anything from the SK within the last 10 seconds
(wal_connect_timeout) or
b. The candidate SK is 1GiB ahead or
c. The candidate SK is in the same AZ as the PS or d. There's a
candidate that is ahead and we've not had any WAL within the last 10
seconds (lagging_wal_timeout)
Hence, we can end up with pageservers that are requesting WAL which
their safekeeper hasn't seen yet.
## Summary of changes
Downgrade warning log to info.
## Problem
part of https://github.com/neondatabase/neon/issues/11813
## Summary of changes
Add a lite PostHog client that only uses the local flag evaluation
functionality. Added a test case that parses an example feature flag and
gets the evaluation result.
TODO: support boolean flag, remote config; implement all operators in
PostHog.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We implemented the retry logic in AWS S3 but not in Azure. Therefore, if
there is an error during Azure listing, we will return an Err to the
caller, and the stream will end without fetching more tenants.
Part of https://github.com/neondatabase/neon/issues/11159
Without this fix, listing tenant will stop once we hit an error (could
be network errors -- that happens more frequent on Azure). If we happen
to stop at a point that we only listed part of the shards, we will hit
the "missed shards" error or even remove layers being used.
This bug (for Azure listing) was introduced as part of
https://github.com/neondatabase/neon/pull/9840
There is also a bug that stops the stream for AWS when there's a timeout
-- this is fixed along with this patch.
## Summary of changes
Retry the request on error. In the future, we should make such streams
return something like `Result<Result<T>>` where the outer result is the
error that ends the stream and the inner one is the error that should be
retried by the caller.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
For `StoreCancelKey`, we were inserting 2 commands, but we were not
inserting two replies. This mismatch leads to errors when decoding the
response.
## Summary of changes
Abstract the command + reply pipeline so that commands and replies are
registered at the same time.
The first line in /etc/ld.so.conf is:
/etc/ld.so.conf.d/*
We want to control library load order so that our compiled binaries are
picked up before others from system packages. The previous solution
allowed the system libraries to load before ours.
Part-of: https://github.com/neondatabase/neon/issues/11857
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We realised that pg-sni-router doesn't need to be separate from proxy.
just a separate port.
## Summary of changes
Add pg-sni-router config to proxy and expose the service.
## Problem
Further investigation on
https://github.com/neondatabase/neon/issues/11159 reveals that the
list_tenant function can find all the shards of the tenant, but then the
shard gets missing during the gc timeline list blob. One reason could be
that in some ways the timeline gets recognized as a relic timeline.
## Summary of changes
Add logging to help identify the issue.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Make `pull_timeline` check tombstones by default. Otherwise, we'd be
recreating timelines if the order between creation and deletion got
mixed up, as seen in #11838.
Fixes#11838.
This PR adds a runtime validation mode to check adherence to alignment
and size-multiple requirements at the VirtualFile level.
This can help prevent alignment bugs from slipping into production
because test systems may have more lax requirements than production.
(This is not the case today, but it could change in the future).
It also allows catching O_DIRECT bugs on systems that don't have
O_DIRECT (macOS).
Consequently, we can now accept
`virtual_file_io_mode={direct,direct-rw}` on macOS now.
This has the side benefit of removing some annoying conditional
compilation around `IoMode`.
A third benefit is that it helped weed out size-multiple requirement
violation bugs in how the VirtualFile unit tests exercise read and write
APIs.
I seized the opportunity to trim these tests down to what actually
matters, i.e., exercising of the `OpenFiles` file descriptor cache.
Lastly, this PR flips the binary-built-in default to `DirectRw` so that
when running Python regress tests and benchmarks without specifying
`PAGESERVER_VIRTUAL_FILE_IO_MODE`, one gets the production behavior.
Refs
- fixes https://github.com/neondatabase/neon/issues/11676
PR
- github.com/neondatabase/neon/pull/11864
committed yesterday rendered the `PAGESERVER_VIRTUAL_FILE_IO_MODE`
env-var-based parametrization ineffective.
As a consequence, the tests and benchmarks in `test_runner/` were using
the binary built-in-default, i.e., `buffered`.
With the 50ms timeouts of pumping state in connector.c, we need to
correctly handle these timeouts that also wake up pg_usleep.
This new approach makes the connection attempts re-start the wait
whenever it gets woken up early; and CHECK_FOR_INTERRUPTS() is called to
make sure we don't miss query cancellations.
## Problem
https://neondb.slack.com/archives/C04DGM6SMTM/p1746794528680269
## Summary of changes
Make sure we start sleeping again if pg_usleep got woken up ahead of
time.
## Problem
Currently there is a memory leak, in that finished safekeeper
reconciliations leave a cancellation token behind which is never cleaned
up.
## Summary of changes
The change adds cleanup after finishing of a reconciliation. In order to
ensure we remove the correct cancellation token, and we haven't raced
with another reconciliation, we introduce a `TokenId` counter to tell
tokens apart.
Part of https://github.com/neondatabase/neon/issues/11670
## Problem
We observe image compaction errors after gc-compaction finishes
compacting below the gc_cutoff. This is because `repartition` returns an
LSN below the gc horizon as we (likely) determined that `distance <=
self.repartition_threshold`.
I think it's better to keep the current behavior of when to trigger
compaction but we should skip image compaction if the returned LSN is
below the gc horizon.
## Summary of changes
If the repartition returns an invalid LSN, skip image compaction.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
SK timeline creations were skipped for imported timelines since we
didn't know the correct start LSN
of the timeline at that point.
## Summary of changes
Created imported timelines on the SK as part of the import finalize
step.
We use the last record LSN of shard 0 as the start LSN for the
safekeeper timeline.
Closes https://github.com/neondatabase/neon/issues/11569
## Problem
The limitation we imposed last week
https://github.com/neondatabase/neon/pull/11709 is not enough to protect
excessive memory usage.
## Summary of changes
If a single key accumulated too much history, give up compaction. In the
future, we can make the `generate_key_retention` function take a stream
of keys instead of first accumulating them in memory, thus easily
support such long key history cases.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Read replicas cannot grant permissions for roles for Neon RLS. Usually
the permission is already granted, so we can optimistically check. See
INC-509
## Summary of changes
Perform a permission lookup prior to actually executing any grants.
# Problem
Before this PR, timeline shutdown would
- cancel the walreceiver cancellation token subtree (child token of
Timeline::cancel)
- call freeze_and_flush
- Timeline::cancel.cancel()
- ... bunch of waiting for things ...
- Timeline::gate.close()
As noted by the comment that is deleted by this PR, this left a window
where, after freeze_and_flush, walreceiver could still be running and
ingest data into a new InMemoryLayer.
This presents a potential source of log noise during Timeline shutdown
where the InMemoryLayer created after the freeze_and_flush observes
that Timeline::cancel is cancelled, failing the ingest with some
anyhow::Error wrapping (deeply) a `FlushTaskError::Cancelled` instance
(`flush task cancelled` error message).
# Solution
It turns out that it is quite easy to shut down, not just cancel,
walreceiver completely
because the only subtask spawned by walreceiver connection manager is
the `handle_walreceiver_connection` task, which is properly shut down
and waited upon when the manager task observes cancellation and exits
its retry loop.
The alternative is to replace all the usage of `anyhow` on the ingest
path
with differentiated error types. A lot of busywork for little gain to
fix
a potential logging noise nuisance, so, not doing that for now.
# Correctness / Risk
We do not risk leaking walreceiver child tasks because existing
discipline
is to hold a gate guard.
We will prolong `Timeline::shutdown` to the degree that we're no longer
making
progress with the rest of shutdown while the walreceiver task hasn't yet
observed cancellation. In practice, this should be negligible.
`Timeline::shutdown` could fail to complete if there is a hidden
dependency
of walreceiver shutdown on some subsystem. The code certainly suggests
there
isn't, and I'm not aware of any such dependency. Anyway, impact will be
low
because we only shut down Timeline instances that are obsolete, either
because
there is a newer attachment at a different location, or because the
timeline
got deleted by the user. We would learn about this through stuck cplane
operations or stuck storcon reconciliations. We would be able to
mitigate by
cancelling such stuck operations/reconciliations and/or by rolling back
pageserver.
# Refs
- identified this while investigating
https://github.com/neondatabase/neon/issues/11762
- PR that _does_ fix a bunch _real_ `flush task cancelled` noise on the
compaction path: https://github.com/neondatabase/neon/pull/11853
## Problem
We want to see how many users of the legacy serverless driver are still
using the old URL for SQL-over-HTTP traffic.
## Summary of changes
Adds a protocol field to the connections_by_sni metric. Ensures it's
incremented for sql-over-http.
Second PR with fixes extracted from #11712, relating to
`--timelines-onto-safekeepers`. Does the following:
* Moves safekeeper registration to `neon_local` instead of the test
fixtures
* Pass safekeeper JWT token if `--timelines-onto-safekeepers` is enabled
* Allow some warnings related to offline safekeepers (similarly to how
we allow them for offline pageservers)
* Enable generations on the compute's config if
`--timelines-onto-safekeepers` is enabled
* fix parallel `pull_timeline` race condition (the one that #11786 put
for later)
Fixes#11424
Part of #11670
## Problem
At the moment, remote_client and target are recreated in download
function. We could reuse it from SnapshotDownloader instance. This isn't
a problem per se, just a quality of life improvement but it caught my
attention when we were trying out snapshot downloading in one of the
older version and ran into a curious case of s3 clients behaving in two
different manners. One client that used `force_path_style` and other one
didn't.
**Logs from this run:**
```
2025-05-02T12:56:22.384626Z DEBUG /data/snappie/2739e7da34e625e3934ef0b76fa12483/timelines/d44b831adb0a6ba96792dc3a5cc30910/000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000014E8F20-00000000014E8F99-00000001 requires download...
2025-05-02T12:56:22.384689Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:apply_configuration: timeout settings for this operation: TimeoutConfig { connect_timeout: Set(3.1s), read_timeout: Disabled, operation_timeout: Disabled, operation_attempt_timeout: Disabled }
2025-05-02T12:56:22.384730Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op: entering 'serialization' phase
2025-05-02T12:56:22.384784Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op: entering 'before transmit' phase
2025-05-02T12:56:22.384813Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op: retry strategy has OKed initial request
2025-05-02T12:56:22.384841Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op: beginning attempt #1
2025-05-02T12:56:22.384870Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op:try_attempt: resolving endpoint endpoint_params=EndpointResolverParams(TypeErasedBox[!Clone]:Params { bucket: Some("bucket"), region: Some("eu-north-1"), use_fips: false, use_dual_stack: false, endpoint: Some("https://s3.self-hosted.company.com"), force_path_style: false, accelerate: false, use_global_endpoint: false, use_object_lambda_endpoint: None, key: None, prefix: Some("/pageserver/tenants/2739e7da34e625e3934ef0b76fa12483/timelines/d44b831adb0a6ba96792dc3a5cc30910/000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000014E8F20-00000000014E8F99-00000001"), copy_source: None, disable_access_points: None, disable_multi_region_access_points: false, use_arn_region: None, use_s3_express_control_endpoint: None, disable_s3_express_session_auth: None }) endpoint_prefix=None
2025-05-02T12:56:22.384979Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op:try_attempt: will use endpoint Endpoint { url: "https://neon.s3.self-hosted.company.com", headers: {}, properties: {"authSchemes": Array([Object({"signingRegion": String("eu-north-1"), "disableDoubleEncoding": Bool(true), "name": String("sigv4"), "signingName": String("s3")})])} }
2025-05-02T12:56:22.385042Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op:try_attempt:lazy_load_identity:provide_credentials{provider=default_chain}: loaded credentials provider=Environment
2025-05-02T12:56:22.385066Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op:try_attempt:lazy_load_identity: identity cache miss occurred; added new identity (took 35.958µs) new_expiration=2025-05-02T13:11:22.385028Z valid_for=899.999961437s partition=IdentityCachePartition(5)
2025-05-02T12:56:22.385090Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op:try_attempt: loaded identity
2025-05-02T12:56:22.385162Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op:try_attempt: entering 'transmit' phase
2025-05-02T12:56:22.385211Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op:try_attempt: new TCP connector created in 361ns
2025-05-02T12:56:22.385288Z DEBUG resolving host="neon.s3.self-hosted.company.com"
2025-05-02T12:56:22.390796Z DEBUG invoke{service=s3 operation=ListObjectVersions sdk_invocation_id=7315885}:try_op:try_attempt: encountered orchestrator error; halting
```
## Problem
During deployment drains/fills, we often see the storage controller
giving up on warmups after 20 seconds, when the warmup is nearly
complete (~90%). This can cause latency spikes for migrated tenants if
they block on layer downloads.
Touches https://github.com/neondatabase/cloud/issues/26193.
## Summary of changes
Increase the drain and fill secondary warmup timeout from 20 to 30
seconds.
## Problem
Compute may flush WAL on page boundaries, leaving some records partially
flushed for a long time.
It leads to `wait_for_last_flush_lsn` stuck waiting for this partial
LSN.
- Closes: https://github.com/neondatabase/cloud/issues/27876
## Summary of changes
- Flush WAL via CHECKPOINT after requesting current_wal_lsn to make sure
that the record we point to is flushed in full
- Use proper endpoint in
`test_timeline_detach_with_aux_files_with_detach_v1`
## Problem
Import code is one big block. Separating planning and execution will
help with reporting
progress of import to storcon (building block for resuming import).
## Summary of changes
Split up the import into planning and execution.
A concurrency limit driven by PS config is also added.
# Refs
- fixes https://github.com/neondatabase/neon/issues/11762
# Problem
PR #10993 introduced internal retries for BufferedWriter flushes.
PR #11052 added cancellation sensitivity to that retry loop.
That cancellation sensitivity is an error path that didn't exist before.
The result is that during timeline shutdown, after we
`Timeline::cancel`, compaction can now fail with error `flush task
cancelled`.
The problem with that:
1. We mis-classify this as an `error!`-worthy event.
2. This causes tests to become flaky because the error is not in global
`allowed_errors`.
Technically we also trip the `compaction_circuit_breaker` because the
resulting `CompactionError` is variant `::Other`.
But since this is Timeline shutdown, is doesn't matter practically
speaking.
# Solution / Changes
- Log the anyhow stack trace when classifying a compaction error as
`error!`.
This was helpful to identify sources of `flush task cancelled` errors.
We only log at `error!` level in exceptional circumstances, so, it's ok
to have bit verbose logs.
- Introduce typed errors along the `BufferedWriter::write_*`=>
`BlobWriter::write_blob`
=> `{Delta,Image}LayerWriter::put_*` =>
`Split{Delta,Image}LayerWriter::put_{value,image}` chain.
- Proper mapping to `CompactionError`/`CreateImageLayersError` via new
`From` impls.
I am usually opposed to any magic `From` impls, but, it's how most of
the compaction code
works today.
# Testing
The symptoms are most prevalent in
`test_runner/regress/test_branch_and_gc.py::test_branch_and_gc`.
Before this PR, I was able to reproduce locally 1 or 2 times per 400
runs using
`DEFAULT_PG_VERSION=15 BUILD_TYPE=release poetry run pytest --count 400
-n 8`.
After this PR, it doesn't reproduce anymore after 2000 runs.
# Future Work
Technically the ingest path is also exposed to this new source of errors
because `InMemoryLayer` is backed by `BufferedWriter`.
But we haven't seen it occur in flaky tests yet.
Details and a fix in
- https://github.com/neondatabase/neon/pull/11851
# Problem
Before this PR, `test_pageserver_catchup_while_compute_down` would
occasionally fail due to scary-looking WARN log line
```
WARN ephemeral_file_buffered_writer{...}:flush_attempt{attempt=1}: \
error flushing buffered writer buffer to disk, retrying after backoff err=Operation canceled (os error 125)
```
After lengthy investigation, the conclusion is that this is likely due
to a kernel bug related due to io_uring async workers (io-wq) and
signals.
The main indicator is that the error only ever happens in correlation
with pageserver shtudown when SIGTERM is received.
There is a fix that is merged in 6.14
kernels (`io-wq: backoff when retrying worker creation`).
However, even when I revert that patch, the issue is not reproducible
on 6.14, so, it remains a speculation.
It was ruled out that the ECANCELED is due to the executor thread
exiting before the async worker starts processing the operation.
# Solution
The workaround in this issue is to retry the operation on ECANCELED
once.
Retries are safe because the low-level io_engine operations are
idempotent.
(We don't use O_APPEND and I can't think of another flag that would make
the APIs covered by this patch not idempotent.)
# Testing
With this PR, the warn! log no longer happens on [my reproducer
setup](https://github.com/neondatabase/neon/issues/11446#issuecomment-2843015111).
And the new rate-limited `info!`-level log line informing about the
internal retry shows up instead, as expected.
# Refs
- fixes https://github.com/neondatabase/neon/issues/11446
## Problem
`switch_timeline_membership` is implemented on safekeeper's server side,
but the is missing in the client.
- Part of https://github.com/neondatabase/neon/issues/11823
## Summary of changes
- Add `switch_timeline_membership` method to `SafekeeperClient`
Corrects the postgres extension s3 gateway address to
be not just a domain name but a full base URL.
To make the code more readable, the option is renamed
to "remote_ext_base_url", while keeping the old name
also accessible by providing a clap argument alias.
Also provides a very simple and, perhaps, even redundant
unit test to confirm the logic behind parsing of the
corresponding CLI argument.
## Problem
As it is clearly stated in
https://github.com/neondatabase/cloud/issues/26005, using of the short
version of the domain name might work for now, but in the future, we
should get rid of using the `default` namespace and this is where it
will, most likely, break down.
## Summary of changes
The changes adjust the domain name of the extension s3 gateway to use
the proper base url format instead of the just domain name assuming the
"default" namespace and add a new CLI argument name for to reflect the
change and the expectance.
## Problem
Users can override some configuration parameters on the DB level with
`ALTER DATABASE ... SET ...`. Some of these overrides, like `role` or
`default_transaction_read_only`, affect `compute_ctl`'s ability to
configure the DB schema properly.
## Summary of changes
Enforce `role=cloud_admin`, `statement_timeout=0`, and move
`default_transaction_read_only=off` override from control plane [1] to
`compute_ctl`. Also, enforce `search_path=public` just in case, although
we do not call any functions in user databases.
[1]:
133dd8c4db/goapp/controlplane/internal/pkg/compute/provisioner/provisioner_common.go (L70)
Fixes https://github.com/neondatabase/cloud/issues/28532
## Problem
There's a few rough edges around PS tracing.
## Summary of changes
* include compute request id in pageserver trace
* use the get page specific context for GET_REL_SIZE and GET_BATCH
* fix assertion in download layer trace
## Problem
We use `head_object` to determine whether an object exists or not.
However, it does not always error due to a missing object.
## Summary of changes
Log the error so that we can have a better idea what's going on with the
scrubber errors in prod.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
According to RFC 7519, `aud` is generally an array of StringOrURI, but
in special cases may be a single StringOrURI value. To accomodate future
control plane work where a single token may work for multiple services,
make the claim a vector.
Link: https://www.rfc-editor.org/rfc/rfc7519#section-4.1.3
Signed-off-by: Tristan Partin <tristan@neon.tech>
Add `/lfc/(prewarm|offload)` routes to `compute_ctl` which interact with
endpoint storage.
Add `prewarm_lfc_on_startup` spec option which, if enabled, downloads
LFC prewarm data on compute startup.
Resolves: https://github.com/neondatabase/cloud/issues/26343
## Problem
Currently the setup for `anon` v2 in the compute image downloads the
latest version of the extension. This can be problematic as on a compute
start/restart it can download a version that is newer than what we have
tested and potentially break things, hence not giving us the ability to
control when the extension is updated.
We were also using `v2.2.0`, which is not ready for production yet and
has been clarified by the maintainer.
Additional context:
https://gitlab.com/dalibo/postgresql_anonymizer/-/issues/530
## Summary of changes
Changed the URL from which we download the `anon` extension to point to
`v2.1.0` instead of `latest`.
Currently we only have an admin scope which allows a user to bypass the
compute_id check. When the admin scope is provided, validate the
audience of the JWT to be "compute".
Closes: https://github.com/neondatabase/cloud/issues/27614
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
When aborting a split, the code accidentally removes all other tenant
shards from the in-memory map that have the same shard count as the
aborted split, causing "tenant not found" errors. It will recover on a
storcon restart, when it loads the persisted state. This issue has been
present for at least a year.
Resolves https://github.com/neondatabase/cloud/issues/28589.
## Summary of changes
Only remove shards belonging to the relevant tenant when aborting a
split.
Also adds a regression test.
## Problem
Address comments in https://github.com/neondatabase/neon/pull/11709
## Summary of changes
- remove `iter` API, users always need to specify buffer size depending
on the expected memory usage.
- several doc improvements
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
- some projects are created during GitHub workflows but not by action
project_create but by python test scripts.
If the python test fails the project is not deleted
## Summary of changes
- make sure we cleanup those python created projects a few days after
they are no longer used, too
## Problem
Two `rust-extensions-build-pgrx14` layers were added independently in
two different PRs, and the layers are exactly the same
## Summary of changes
- Remove one of `rust-extensions-build-pgrx14` layers
## Problem
It's difficult to tell when the JWT expired from current logs and error
messages.
## Summary of changes
Add exp/nbf timestamps to the respective error variants.
Also use checked_add when deserializing a SystemTime from JWT.
Related to INC-509
## Problem
Some small cosmetic changes I made while reading the code. Should not
affect anything.
## Summary of changes
- Remove `n_votes` field because it's not used anymore
- Explicitly initialize `safekeepers_generation` with
`INVALID_GENERATION` if the generation is not present (the struct is
zero-initialized anyway, but the explicit initialization is better IMHO)
- Access SafekeeperId via pointer `sk_id` created above
I got an 'undocumented_unsafe_blocks' clippy warning about it. Not sure
why I got the warning now and not before, but in any case a comment is a
good idea.
# Improve OpenOptions API ergonomics
Closes#11787
This PR improves the OpenOptions API ergonomics by:
1. Making OpenOptions methods take and return owned Self instead of &mut
self
2. Changing VirtualFile::open_with_options_v2 to take an owned
OpenOptions
3. Removing unnecessary .clone() and .to_owned() calls
These changes make the API more idiomatic Rust by leveraging the builder
pattern with owned values, which is cleaner and more ergonomic than the
previous approach.
Link to Devin run:
https://app.devin.ai/sessions/c2a4b24f7aca40a3b3777f4259bf8ee1
Requested by: christian@neon.tech
---------
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: christian@neon.tech <christian@neon.tech>
## Problem
Part of https://github.com/neondatabase/neon/issues/11762
## Summary of changes
While #11762 needs some work to refactor the error propagating thing, we
can do a hacky fix for the gc-compaction tests to allow flush error
during shutdown. It does not affect correctness.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Some PrivateLink customers are unable to use Private DNS. As such they
use an invalid domain name to address Neon. We currently are rejecting
those connections because we cannot resolve the correct certificate.
## Summary of changes
1. Ensure a certificate is always returned.
2. If there is an SNI field, use endpoint fallback if it doesn't match.
I suggest reviewing each commit separately.
## Problem
Undo unintended change 60b9fb1baf
## Summary of changes
Add assert that we are not storing fake LSN in LwLSN.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
See https://github.com/neondatabase/neon/issues/11790
The neon extension opens extensions to the pageservers, which consumes
file descriptors. Postgres has a mechanism to count how many FDs are in
use, but it doesn't know about those FDs. We should call
ReserveExternalFD() or AcquireExternalFD() to account for them.
## Summary of changes
Call `ReserveExternalFD()` for each shard
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Mikhail Kot <mikhail@neon.tech>
## Problem
We notify only Storage team about failed deploys, but Compute and Proxy
teams can also benefit from that
## Summary of changes
- Adjust `notify-storage-release-deploy-failure` to notify the relevant
team about failed deploy
## Problem
Those tests are timing out more frequently after
https://github.com/neondatabase/neon/pull/11585
## Summary of changes
Increase timeout for `test_pageserver_gc_compaction_smoke`
Increase rollback wait timeout for `test_tx_abort_with_many_relations`
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
part of https://github.com/neondatabase/neon/issues/9516
One thing I realized in the past few months is that "no-way-back" things
like this are scary to roll out without a fine-grained rollout infra.
The plan was to flip the flag in the repo and roll it out soon, but I
don't think rolling out would happen in the near future. So I'd rather
revert the flag to avoid creating a discrepancy between staging and the
regress tests.
## Summary of changes
Not using rel_size_v2 by default in unit tests; we still have a few
tests to explicitly test the new format so we still get some test
coverages.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Adds an extra key CLI arg to `pagectl layer list-layer`. When provided,
only layers with key ranges containing the key will be listed in
decreasing LSN order (indices are preserved for `dump-layer`).
Removes the leaked tracing context for the "compute_monitor:run" log,
which either inherited the "start_compute" span or also the HTTP request
context.
## Problem
The problem is that the context of the monitor's trace is unnecessarily
populated with the span data inherited from previously within the same
thread.
## Summary of changes
The context is completely reset by moving the span from the thread
spawning the monitor into the thread where the monitor will actually
start working.
Addresses https://github.com/neondatabase/cloud/issues/28145
## Examples
### Before
```
2025-04-30T16:39:05.840298Z INFO start_compute:compute_monitor:run: compute is not running, waiting before monitoring activity
```
### After
```
2025-04-30T16:39:05.840298Z INFO compute_monitor:run: compute is not running, waiting before monitoring activity
```
## Problem
`TermsCollectedMset` and `VotesCollectedMset` accept a MemberSet
argument to find a quorum in. It may be either `wp->mconf.members` or
`wp->mconf.new_members`. But the loops inside always use
`wp->mconf.members.len`.
If the sizes of member sets are different, it may lead to these
functions not scanning all the safekeepers from `mset`.
We are not planning to change the member set size dynamically now, but
it's worth fixing anyway.
- Part of https://github.com/neondatabase/neon/issues/11669
## Summary of changes
- Use proper size of member set in `TermsCollectedMset` and
`VotesCollectedMset`
This patch contains some fixes of issues I ran into for #11712:
* make `pull_timeline` return success for timeline that already exists.
This follows general API design of storage components: API endpoints are
retryable and converge to a status code, instead of starting to error.
We change the `pull_timeline`'s return type a little bit, because we
might not actually have a source sk to pull from. Note that the fix is
not enough, there is still a race when two `pull_timeline` instances
happen in parallel: we might try to enter both pulled timelines at the
same time. That can be fixed later.
* make `pull_timeline` support one safekeeper being down. In general, if
one safekeeper is down, that's not a problem. the added comment explains
a potential situation (found in the `test_lagging_sk` test for example)
* don't log very long errors when computes try to connect to safekeepers
that don't have the timeline yet, if `allow_timeline_creation` is false.
That flag is enabled when a sk connection string with generation numbers
is passed to the compute, so we'll hit this code path more often. E.g.
when a safekeeper missed a timeline creation, but the compute connects
to it first before the `pull_timeline` gets requested by the storcon
reconciler: this is a perfectly normal situation. So don't log the whole
error backtrace, and don't log it on the error log level, but only on
info.
part of #11670
## Problem
Part of https://github.com/neondatabase/neon/issues/11615
## Summary of changes
We don't understand the root cause of why we get resident size surge
every now and then. This patch adds observability for that, and in the
next week, we might have a better understanding of what's going on.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We occasionally see basebackup errors alerts but there were no errors
logged. Looking at the code, the only codepath that will cause this is
shutting down.
## Summary of changes
Do not increase any counter (ok/err) when basebackup request gets
cancelled due to shutdowns.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1745599814030679
Assume the following scenario: prefetch_wait_for is doing
`CHECK_FOR_INTERRUPTS` which tries to load prefetch responses.
In case of error is calls pageserver_disconnect which aborts all
in-flight requests. But such failure is not detected by
`prefetch_wait_for` which returns true. As a result
`communicator_read_at_lsnv` assumes that slot is received, but as far as
asserts are disables at prod, it is not actually checked.
Then it tries to interpret response and ... *SIGSEGV*
## Summary of changes
Check target slot state in `prefetch_wait_for`.
Resolves https://github.com/neondatabase/cloud/issues/28258
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We have been running compute <-> sk protocol version 3 for a while on
staging with no issues observed, and want to fully migrate to it
eventually.
## Summary of changes
Let's make v3 the default.
ref https://github.com/neondatabase/neon/issues/10326
---------
Co-authored-by: Arpad Müller <arpad@neon.tech>
This is a rebase of PR #10739 by @henryliu2014 on the current main
branch.
## Problem
pageserver: remove resident size from billing metrics
Fixes#10388
## Summary of changes
The following changes have been made to remove resident size from
billing metrics:
* removed the metric "resident_size" and related codes in
consumption_metrics/metrics.rs
* removed the item of the description of metric "resident_size" in
consumption_metrics.md
* refactored the metric "resident_size" related test case
Requested by: John Spray (john@neon.tech)
---------
Co-authored-by: liuheqing <hq.liu@qq.com>
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: John Spray <john@neon.tech>
Update the compute Dockerfile to use a new version of pgrag. The new
version of pgrag uses the latest pgrx, and has a fix that terminates
background workers on postmaster exit.
## Problem
In #11727 I overlooked the case of multiple attached locations for shard
0.
I misread the code and thought `create_one` acts on one location, but it
actually acts on one _shard_, which is potentially multiple locations.
This was not a regression, but it meant that the fix was incomplete.
## Summary of changes
- In `create_one`, when updating shard zero, have any "other" locations
use the initdb from shard 0
Right now we only support running one reconciliation per safekeeper.
This is of course usually way below of what a safekeeper can do.
Therefore, introduce a semaphore and spawn the tasks asynchronously as
they come in.
Part of #11670
## Problem
When the workflow ran on a schedule, the `region_id` input was not set.
As a result, an empty region value was used, which caused errors during
execution.
## Summary of Changes
- Added fallback logic to set a default region (`aws-us-east-2`) when
`region_id` is not provided.
- Ensures the workflow works correctly both when triggered manually
(`workflow_dispatch`) and on schedule (`cron`).
## Problem
Our CI/CD security tool StepSecurity maintains safer forks of popular
GitHub Actions with low security scores. We're replacing
dorny/paths-filter with the maintained step-security/paths-filter
version to reduce risk of supply chain breaches and potential CVEs.
## Summary of changes
replace
```uses: dorny/paths-filter@de90cc6fb3 ``` with ```uses: step-security/paths-filter@v3```
This PR will fix: neondatabase/cloud#26141
## Problem
The `lint-release-pr` workflow run for
https://github.com/neondatabase/neon/pull/11763 failed, because the new
action did not match the lint.
## Summary of changes
Include time in expected merge message regex.
In order for the test to work when sanitizers are enabled, we would need
to compile the dummy Postgres extension with the same sanitizer flags
that we compile Postgres and the neon extension with. Doing this work
would be a little more than trivial, so skipping is the best option, at
least for now.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We didn't consider tombstones in replorigin read path in the past. This
was fine because tombstones are stored as LSN::Invalid before we
universally define what the tombstone is for sparse keyspaces.
Now we remove non-inherited keys during detach ancestor and write the
universal tombstone "empty image". So we need to consider it across all
the read paths.
related: https://github.com/neondatabase/neon/pull/11299
## Summary of changes
Empty value gets ignored for replorigin scans.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We had retained the ability to run in a generation-less mode to support
test_generations_upgrade, which was replaced with a cleaner backward
compat test in https://github.com/neondatabase/neon/pull/10701
## Summary of changes
- Remove all the special cases for "if no generation" or "if no control
plane api"
- Make control_plane_api config mandatory
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Postgres has a nice self-documenting macro called pg_unreachable() when
you want to assert that a location in code won't be hit.
Warning in question:
```
/home/tristan957/Projects/work/neon//pgxn/neon/libpagestore.c: In function ‘pageserver_connect’:
/home/tristan957/Projects/work/neon//pgxn/neon/libpagestore.c:739:1: warning: control reaches end of non-void function [-Wreturn-type]
739 | }
| ^
```
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
In princple, pageservers with different postgres binaries might generate
different initdbs, resulting in inconsistency between shards. To avoid
that, we should have shard 0 generate the initdb and other shards re-use
it.
Fixes: https://github.com/neondatabase/neon/issues/11340
## Summary of changes
- For shards with index greater than zero, set
`existing_initdb_timeline_id` in timeline creation to consume the
existing initdb rather than creating a new one
## Problem
Our different repositories had both had code to achieve very similar
results in terms of release PR creation, but they were structured
differently and had different extensions. This was likely to cause
maintainability problems in the long run.
## Summary of changes
Switch to a python cli based composite action for creating the release
PRs that will also be introduced in our other repos later.
## To Do
- [ ] Adjust our docs to reflect the changes from this.
# Remove SAFEKEEPER_AUTH_TOKEN env var parsing from safekeeper
This PR is a follow-up to #11443 that removes the parsing of the
`SAFEKEEPER_AUTH_TOKEN` environment variable from the safekeeper
codebase while keeping the `auth_token_path` CLI flag functionality.
## Changes:
- Removed code that checks for the `SAFEKEEPER_AUTH_TOKEN` environment
variable
- Updated comments to reflect that only the `auth_token_path` CLI flag
is now used
As mentioned in PR #11443, the environment variable approach was planned
to be deprecated and removed in favor of the file-based approach, which
is more secure since environment variables can be quite public in both
procfs and unit files.
Link to Devin run:
https://app.devin.ai/sessions/d6f56cf1b4164ea9880a9a06358a58ac
Requested by: arpad@neon.tech
---------
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: arpad@neon.tech <arpad@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
The `pageserver_smgr_query_seconds` buckets are too coarse, using powers
of 10: 1 µs, 10 µs, 100 µs, 1 ms, 10 ms, 100 ms, 1 s, 10 s, 100 s. This
is one of our most crucial latency metrics, and needs better resolution.
Touches #11594.
## Summary of changes
This patch uses buckets with better resolution around 1 ms (the typical
latency):
* 0.6 ms
* 1 ms
* 3 ms
* 6 ms
* 10 ms
* 30 ms
* 100 ms
* 1 s
* 3 s
These will be the same as the compute's `compute_getpage_wait_seconds`,
to make them comparable across the compute and Pageserver:
https://github.com/neondatabase/flux-fleet/pull/579. We sacrifice
buckets above 3 s, since these can already be considered "too slow".
This does not change the previously used `CRITICAL_OP_BUCKETS`, which is
also used for other operations on different timescales (e.g. LSN waits).
We should consider replacing this with more appropriate buckets for
specific operations, since it covers a large span with low resolution.
## Problem
pg-sni-router isn't aware of compute TLS
## Summary of changes
If connections come in on port 4433, we require TLS to compute from
pg-sni-router
## Problem
- if-conditions for the `check-macos-build` workflow don't trigger it on
PRs with relevant changes (in Rust code or Postgres submodules).
- Jobs in the workflow depend on the presence of a cache, which is not
guaranteed.
## Summary of changes
- Fix if-conditions
- Use artifacts on top of cache whenever the workflow depends on it —
the cache might not be available
## Problem
We currently don't run end-to-end tests for PostgreSQL extensions on our
cloud infrastructure, which means we might miss problems that only occur
in a real cloud environment.
## Summary of changes
- Added a workflow to run extension tests against a cloud staging
instance
- Set up proper project configuration for extension testing
- Implemented test execution with appropriate environment settings
- Added error handling and reporting for test failures
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
## Problem
Provide an easy way to run particular test(s) N times on CI.
## Summary of changes
* Allow for passing the test selection and the number of test runs to
the existing "Build and Test Locally" workflow
* Allow for running multiple selected tests by the "Pytest regression
tests" step
* Introduce a new workflow to run specified test(s) several times
* Store results in a separate database to distinguish between testing
tests for stability and usual testing
## Problem
Proposed minor changes to the `consumption_metrics` document.
## Summary of changes
- Fixed minor typos in the document.
- Minor formatting in the description of metrics `timeline_logical_size`
and `synthetic_storage_size`. Makes this consistent as with description
of other metrics in the document.
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Mikhail Kot <mikhail@neon.tech>
### Summary
I'm fixing one or more of the following CI/CD misconfigurations to
improve security. Please feel free to leave a comment if you think the
current permissions for the GITHUB_TOKEN should not be restricted so I
can take a note of it as accepted behaviour.
- Restrict permissions for GITHUB_TOKEN
- Add step-security/harden-runner
- Pin Actions to a full length commit SHA
### Security Fixes
will fix https://github.com/neondatabase/cloud/issues/26141
## Problem
Broker supports only HTTP, no HTTPS
- Closes: https://github.com/neondatabase/cloud/issues/27492
## Summary of changes
- Add `listen_https_addr`, `ssl_key_file`, `ssl_cert_file`,
`ssl_cert_reload_period` arguments to storage broker
- Make `listen_addr` argument optional
- Listen https in storage broker
- Support https for storage broker request in neon_local
- Add `use_https_storage_broker_api` option to NeonEnvBuilder
## Problem
Shard splits break timeline imports.
## Summary of Changes
Ensure mutual exclusion for imports and shard splits.
On the shard split code path:
1. Right before shard splitting, check the database to ensure that
no-import is on-going for the tenant. Exclusion is guaranteed because
this validation is done while holding the exclusive tenant lock.
Timeline creation (and import creation implicitly) requires a shared
tenant lock.
2. When selecting a shard to split, use the in-mem state to exclude
shards with an on-going import. This is opportunistic since an import
might start after the check, but allows shard splits to make progres
instead of continously retrying to split the same shard.
On the timeline creation code path:
1. Check the in-memory splitting flag on all shards of the tenant. If
any of them are splitting, error out asking the client to retry. On the
happy path this is not required, due to the tenant lock set-up described
above, but it covers the case where we restart with a pending
shard-split.
Closes https://github.com/neondatabase/neon/issues/11567
## Problem
- using Hetzner buckets for cache requires secrets, we either need
`secrets: inherit` to make it works
- we don't have self-hosted MacOs runners, so actually GH native cache
is more optimal solution there
## Summary of changes
- switch to GH native cache for macos builds
## Problem
The docker compose test script (`docker_compose_test.sh`) had
inconsistent codestyle, mixing legacy syntax with modern approaches and
not following best practices at all. This inconsistency could lead to
potential issues with variable expansion, path handling, and
maintainability.
## Summary of changes
This PR modernizes the test script with several codestyle improvements:
* Variable scoping and exports:
* Added proper export declarations for environment variables
* Added explicit COMPOSE_PROFILES export to avoid repetitive flags
* Modern Bash syntax:
* Replaced [ ] with [[ ]] for safer conditional testing
* Used arithmetic operations (( cnt += 3 )) instead of expr
* Added proper variable expansion with braces ${variable}
* Added proper quoting around variables and paths with "${variable}"
* Docker Compose commands:
* Replaced hardcoded container names with service names
* Used docker compose exec instead of docker exec $CONTAINER_NAME
* Removed repetitive flags by using environment variables
* Shell script best practices:
* Added function keyword before function definition
* Used safer path handling with "$(dirname "${0}")"
These changes make the script more maintainable, less error-prone, and
more consistent with modern shell scripting standards.
## Problem
It seems are production-ready cert-manager setup now includes a full
certificate chain. This was not accounted for and the decoder would
error.
## Summary of changes
Change the way we decode certificates to support cert-chains, ignoring
all but the first cert.
This also changes a log line to not use multi-line errors.
~~I have tested this code manually against real certificates/keys, I
didn't want to embed those in a test just yet, not until the cert
expires in 24 hours.~~
## Problem
close https://github.com/neondatabase/neon/issues/11694
We had the delta layer iterator and image layer iterator set to buffer
at most 8MB data. Note that 8MB is the compressed size, so it is
possible for those iterators contain more than 8MB data in memory.
For the recent OOM case, gc-compaction was running over 556 layers,
which means that we will have 556 active iterators. So in theory, it
could take up to 556*8=4448MB memory when the compaction is going on. If
images get compressed and the compression ratio is high (for that
tenant, we see 3x compression ratio across image layers), then that's
13344MB memory.
Also we have layer rewrites, which explains the memory taken by
gc-compaction itself (versus the iterators). We rewrite 424 out of 556
layers, and each of such rewrites need a pair of delta layer writer. So
we are buffering a lot of deltas in the memory.
The flamegraph shows that gc-compaction itself takes 6GB memory, delta
iterator 7GB, and image iterator 2GB, which can be explained by the
above theory.
## Summary of changes
- Reduce the buffer sizes.
- Estimate memory consumption and if it is too high.
- Also give up if the number of layers-to-rewrite is too high.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
The current test was just SQL files only, but we also want to test a
remote extension which includes a loadable library. With both extensions
we should cover a larger portion of compute_ctl's remote extension code
paths.
Fixes: https://github.com/neondatabase/neon/issues/11146
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
In https://github.com/neondatabase/neon/pull/11345 coordination of
imports moved to the storage controller.
It involves notifying cplane when the import has been completed by
calling an idempotent endpoint.
If the storage controller shuts down in the middle of finalizing an
import, it would never be retried.
## Summary of changes
Reconcile imports at start-up by fetching the complete imports from the
database and spawning a background
task which notifies cplane.
Closes: https://github.com/neondatabase/neon/issues/11570
## Problem
We saw the following scenario in staging:
1. Pod A starts up. Becomes leader and steps down the previous pod
cleanly.
2. Pod B starts up (deployment).
3. Step down request from pod B to pod A times out. Pod A did not manage
to stop its reconciliations within 10 seconds and exited with return
code 1
([code](7ba8519b43/storage_controller/src/service.rs (L8686-L8702))).
4. Pod B marks itself as the leader and finishes start-up
5. k8s restarts pod A
6. k8s marks pod B as ready
7. pod A sends step down request to pod A - this succeeds => pod A is
now the leader
8. k8s kills pod A because it thinks pod B is healthy and pod A is part
of the old replica set
We end up in a situation where the only pod we have (B) is stepped down
and attempts to forward requests to a leader that doesn't exist. k8s
can't detect that pod B is in a bad state since the /status endpoint
simply returns 200 hundred if the pod is running.
## Summary of changes
This PR includes a number of robustness improvements to the leadership
protocol:
* use a single step down task per controller
* add a new endpoint to be used as k8s liveness probe and check
leadership status there
* handle restarts explicitly (i.e. don't step yourself down)
* increase the step down retry count
* don't kill the process on long step down since k8s will just restart
it
# Problem
The Pageserver read path exclusively uses direct IO if
`virtual_file_io_mode=direct`.
The write path is half-finished. Here is what the various writing
components use:
|what|buffering|flags on <br/>`v_f_io_mode`<br/>=`buffered`|flags on
<br/>`virtual_file_io_mode`<br/>=`direct`|
|-|-|-|-|
|`DeltaLayerWriter`| BlobWriter<BUFFERED=true> | () | () |
|`ImageLayerWriter`| BlobWriter<BUFFERED=false> | () | () |
|`download_layer_file`|BufferedWriter|()|()|
|`InMemoryLayer`|BufferedWriter|()|O_DIRECT|
The vehicle towards direct IO support is `BufferedWriter` which
- largely takes care of O_DIRECT alignment & size-multiple requirements
- double-buffering to mask latency
`DeltaLayerWriter`, `ImageLayerWriter` use `blob_io::BlobWriter` , which
has neither of these.
# Changes
## High-Level
At a high-level this PR makes the following primary changes:
- switch the two layer writer types to use `BufferedWriter` & make
sensitive to `virtual_file_io_mode` (via open_with_options_**v2**)
- make `download_layer_file` sensitive to `virtual_file_io_mode` (also
via open_with_options_**v2**)
- add `virtual_file_io_mode=direct-rw` as a feature gate
- we're hackish-ly piggybacking on OpenOptions's ask for write access
here
- this means with just `=direct` InMemoryLayer reads and writes no
longer uses O_DIRECT
- this is transitory and we'll remove the `direct-rw` variant once the
rollout is complete
(The `_v2` APIs for opening / creating VirtualFile are those that are
sensitive to `virtual_file_io_mode`)
The result is:
|what|uses <br/>`BufferedWriter`|flags on
<br/>`v_f_io_mode`<br/>=`buffered`|flags on
<br/>`v_f_io_mode`<br/>=`direct`|flags on
<br/>`v_f_io_mode`<br/>=`direct-rw`|
|-|-|-|-|-|
|`DeltaLayerWriter`| ~~Blob~~BufferedWriter | () | () | O_DIRECT |
|`ImageLayerWriter`| ~~Blob~~BufferedWriter | () | () | O_DIRECT |
|`download_layer_file`|BufferedWriter|()|()|O_DIRECT|
|`InMemoryLayer`|BufferedWriter|()|~~O_DIRECT~~()|O_DIRECT|
## Code-Level
The main change is:
- Switch `blob_io::BlobWriter` away from its own buffering method to use
`BufferedWriter`.
Additional prep for upholding `O_DIRECT` requirements:
- Layer writer `finish()` methods switched to use IoBufferMut for
guaranteed buffer address alignment. The size of the buffers is PAGE_SZ
and thereby implicitly assumed to fulfill O_DIRECT requirements.
For the hacky feature-gating via `=direct-rw`:
- Track `OpenOptions::write(true|false)` in a field; bunch of mechanical
churn.
- Consolidate the APIs in which we "open" or "create" VirtualFile for
better overview over which parts of the code use the `_v2` APIs.
Necessary refactorings & infra work:
- Add doc comments explaining how BufferedWriter ensures that writes are
compliant with O_DIRECT alignment & size constraints. This isn't new,
but should be spelled out.
- Add the concept of shutdown modes to `BufferedWriter::shutdown` to
make writer shutdown adhere to these constraints.
- The `PadThenTruncate` mode might not be necessary in practice because
I believe all layer files ever written are sized in multiples `PAGE_SZ`
and since `PAGE_SZ` is larger than the current alignment requirements
(512/4k depending on platform), it won't be necesary to pad.
- Some test (I believe `round_trip_test_compressed`?) required it though
- [ ] TODO: decide if we want to accept that complexity; if we do then
address TODO in the code to separate alignment requirement from buffer
capacity
- Add `set_len` (=`ftruncate`) VirtualFile operation to support the
above.
- Allow `BufferedWriter` to start at a non-zero offset (to make room for
the summary block).
Cleanups unlocked by this change:
- Remove non-positional APIs from VirtualFile (e.g. seek, write_full,
read_full)
Drive-by fixes:
- PR https://github.com/neondatabase/neon/pull/11585 aimed to run unit
tests for all `virtual_file_io_mode` combinations but didn't because of
a missing `_` in the env var.
# Performance
This section assesses this PR's impact on deployments with current
production setting (`=direct`) and anticipated impact of switching to
(`=direct-rw`).
For `DeltaLayerWriter`, `=direct` should remain unchanged to slightly
improved on throughput because the `BlobWriter`'s buffer had the same
size as the `BufferedWriter`'s buffer, but it didn't have the
double-buffering that `BufferedWriter` has.
The `=direct-rw` enables direct IO; throughput should not be suffering
because of double-buffering; benchmarks will show if this is true.
The `ImageLayerWriter` was previously not doing any buffering
(`BUFFERED=false`).
It went straight to issuing the IO operation to the underlying
VirtualFile and the buffering was done by the kernel.
The switch to `BufferedWriter` under `=direct` adds an additional memcpy
into the BufferedWriter's buffer.
We will win back that memcpy when enabling direct IO via `=direct-rw`.
A nice win from the switch to `BufferedWriter` is that ImageLayerWriter
performs >=16x fewer write operations to VirtualFile (the BlobWriter
performs one write per len field and one write per image value).
This should save low tens of microseconds of CPU overhead from doing all
these syscalls/io_uring operations, regardless of `=direct` or
`=direct-rw`.
Aside from problems with alignment, this write frequency without
double-buffering is prohibitive if we actually have to wait for the
disk, which is what will happen when we enable direct IO via
(`=direct-rw`).
Throughput should not be suffering because of BufferedWrite's
double-buffering; benchmarks will show if this is true.
`InMemoryLayer` at `=direct` will flip back to using buffered IO but
remain on BufferedWriter.
The buffered IO adds back one memcpy of CPU overhead.
Throughput should not suffer and will might improve on
not-memory-pressured Pageservers but let's remember that we're doing the
whole direct IO thing to eliminate global memory pressure as a source of
perf variability.
## bench_ingest
I reran `bench_ingest` on `im4gn.2xlarge` and `Hetzner AX102`.
Use `git diff` with `--word-diff` or similar to see the change.
General guidance on interpretation:
- immediate production impact of this PR without production config
change can be gauged by comparing the same `io_mode=Direct`
- end state of production switched over to `io_mode=DirectRw` can be
gauged by comparing old results' `io_mode=Direct` to new results'
`io_mode=DirectRw`
Given above guidance, on `im4gn.2xlarge`
- immediate impact is a significant improvement in all cases
- end state after switching has same significant improvements in all
cases
- ... except `ingest/io_mode=DirectRw volume_mib=128 key_size_bytes=8192
key_layout=Sequential write_delta=Yes` which only achieves `238 MiB/s`
instead of `253.43 MiB/s`
- this is a 6% degradation
- this workload is typical for image layer creation
# Refs
- epic https://github.com/neondatabase/neon/issues/9868
- stacked atop
- preliminary refactor https://github.com/neondatabase/neon/pull/11549
- bench_ingest overhaul https://github.com/neondatabase/neon/pull/11667
- derived from https://github.com/neondatabase/neon/pull/10063
Co-authored-by: Yuchen Liang <yuchen@neon.tech>
## Problem
`cargo-deny` 0.16.2 spits a bunch of warnings like:
```
warning[index-failure]: unable to check for yanked crates
```
The issue is fixed for the latest version of `cargo-deny` (0.18.2). And
while we're here, let's bump all the packages we have in `build-tools`
image
## Summary of changes
- bump cargo-hakari to 0.9.36
- bump cargo-deny to 0.18.2
- bump cargo-hack to 0.6.36
- bump cargo-nextest to 0.9.94
- bump diesel_cli to 2.2.9
- bump s5cmd to 2.3.0
- bump mold to 2.37.1
- bump python to 3.11.12
## Problem
Currently, we only report the timestamp of the last moment we think
Postgres was active. The problem is that if Postgres gets completely
unresponsive, we still report some old timestamp, and it's impossible to
distinguish situations 'Postgres is effectively down' and 'Postgres is
running, but no client activity'.
## Summary of changes
Refactor the `compute_ctl`'s compute monitor so that it was easier to
track the connection errors and failed activity checks, and report
- `now() - last_successful_check` as current downtime on any failure
- cumulative Postgres downtime during the whole compute lifetime
After adding a test, I also noticed that the compute monitor may not
reconnect even though queries fail with `connection closed` or `error
communicating with the server: Connection reset by peer (os error 54)`,
but for some reason we do not catch it with `client.is_closed()`, so I
added an explicit reconnect in case of any failures.
Discussion:
https://neondb.slack.com/archives/C03TN5G758R/p1742489426966639
Main change:
- `BufferedWriter` owns the `W`; no more `Arc<W>`
- We introduce auto-delete-on-drop wrappers for `VirtualFile`.
- `TempVirtualFile` for write-only users
- `TempVirtualFileCoOwnedByEphemeralFileAndBufferedWriter` for
EphemeralFile which requires read access to the immutable prefix of the
file (see doc comments for details)
- Users of `BufferedWriter` hand it such a wrapped `VirtualFile`.
- The wrapped `VirtualFile` moves to the background flush task.
- On `BufferedWriter` shutdown, ownership moves back.
- Callers remove the wrapper (`disarm_into_inner()`) after doing final
touches, e.g., flushing index blocks and summary for delta/image layer
writers.
If the BufferedWriter isn't shut down properly via
`BufferedWriter::shutdown`, or if there is an error during final
touches, the wrapper type ensures that the file gets unlinked.
We store a GateGuard inside the wrapper to ensure that the Timeline is
still alive when unlinking on drop.
Rust doesn't have async drop yet, so, the unlinking happens using a
synchronous syscall.
NB we don't fsync the surrounding directory.
This is how it's been before this PR; I believe it is correct because
all of these files are temporary paths that get cleaned up on timeline
load.
Again, timeline load does not need to fsync because the next timeline
load will unlink again if the file reappears.
The auto-delete-on-drop can happen after a higher-level mechanism
retries.
Therefore, we switch all users to monotonically increasing, never-reused
temp file disambiguators.
The aspects pointed out in the last two paragraphs will receive further
cleanup in follow-up task
- https://github.com/neondatabase/neon/issues/11692
Drive-by changes:
- It turns out we can remove the two-pronged code in the layer file
download code.
No need to make this a separate PR because all of production already
uses `tokio-epoll-uring` with the buffered writer for many weeks.
Refs
- epic https://github.com/neondatabase/neon/issues/9868
- alternative to https://github.com/neondatabase/neon/pull/11544
* Replace yanked papaya version
* Remove unused allowed license: OpenSSL
* Remove Zlib license from general allow list since it's listed in the
exceptions section per crate
* Drop clarification for ring since they have separate LICENSE files now
* List the tower-otel repo as allowed source while we sort out the OTel
deps
Switches the tenant snapshot subcommand of the storage scrubber to
`remote_storage`. As this is the last piece of the storage scrubber
still using the S3 SDK, this finishes the project started in #7547.
This allows us to do tenant snapshots on Azure as well.
Builds on #11671Fixes#8830
Adds a versioning API to remote_storage. We want to use it in the
scrubber, both for tenant snapshot as well as for metadata checks.
for #8830
and for #11588
## Problem
Pageservers notify control plane directly when a shard import has
completed.
Control plane has to download the status of each shard from S3 and
figure out if everything is truly done,
before proceeding with branch activation.
Issues with this approach are:
* We can't control shard split behaviour on the storage controller side.
It's unsafe to split
during import.
* Control plane needs to know about shards and implement logic to check
all timelines are indeed ready.
## Summary of changes
In short, storage controller coordinates imports, and, only when
everything is done, notifies control plane.
Big rocks:
1. Store timeline imports in the storage controller database. Each
import stores the status of its shards in the database.
We hook into the timeline creation call as our entry point for this.
2. Pageservers get a new upcall endpoint to notify the storage
controller of shard import updates.
3. Storage controller handles these updates by updating persisted state.
If an update finalizes the import,
then poll pageservers until timeline activation, and, then, notify the
control plane that the import is complete.
Cplane side change with new endpoint is in
https://github.com/neondatabase/cloud/pull/26166
Closes https://github.com/neondatabase/neon/issues/11566
Update the sentry crate to 0.37. This deduplicates the `webpki-roots`
crate in our crate graph, and brings another dependency onto newer
rustls `0.23.18`.
# Add --dev CLI flag to pageserver and safekeeper binaries
This PR adds the `--dev` CLI flag to both the pageserver and safekeeper
binaries without implementing any functionality yet. This is a precursor
to PR #11517, which will implement the full functionality to require
authentication by default unless the `--dev` flag is specified.
## Changes
- Add `dev_mode` config field to pageserver binary
- Add `--dev` CLI flag to safekeeper binary
This PR is needed for forward compatibility tests to work properly, when
we try to merge #11517
Link to Devin run:
https://app.devin.ai/sessions/ad8231b4e2be430398072b6fc4e85d46
Requested by: John Spray (john@neon.tech)
---------
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: John Spray <john@neon.tech>
# Fix KeyError in physical replication benchmark test
This PR fixes the failing physical replication benchmark test that was
encountering a KeyError: 'endpoints'.
The issue was in accessing `project["project"]["endpoints"][0]["id"]`
when it should be `project["endpoints"][0]["id"]`, consistent with how
endpoints are accessed elsewhere in the codebase.
Fixed the issue in both test functions:
- test_ro_replica_lag
- test_replication_start_stop
Link to Devin run:
https://app.devin.ai/sessions/be3fe9a9ee5942e4b12e74a7055f541b
Requested by: Peter Bendel
Co-authored-by: Devin AI <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: peterbendel@neon.tech <peterbendel@neon.tech>
ARM computes are incoming and we need to account for that in remote
extensions. Previously, we just blindly assumed that all computes were
x86_64.
Note that we use the Go architecture naming convention instead of the
Rust one directly to do our best and be consistent across the stack.
Part-of: https://github.com/neondatabase/cloud/issues/23148
Signed-off-by: Tristan Partin <tristan@neon.tech>
In tests and when one safekeeper is down in small regions, we need to
contend with one or two safekeepers. Before, we gave an error in
`safekeepers_for_new_timeline`. Now we just silently allow the timeline
to be created on one or two safekeepers.
Part of #9011
## Problem
test_storage_controller_heartbeats is flaky because of unallowed
reconciler errors (#11625)
## Summary of changes
Allow reconcile errors as in other tests in test_storage_controller.py.
## Problem
Init fork is used in DEBUG_COMPARE_LOCAL to determine unlogged relation
or unlogged build.
But it is created only after the relation is initialized and so can be
swapped out, producing `Page is evicted with zero LSN` error.
## Summary of changes
Create init fork together with main fork for unlogged relations in
DEBUG_COMPARE_LOCAL mode.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Safekeeper doesn't use TLS in wal service
- Closes: https://github.com/neondatabase/cloud/issues/27302
## Summary of changes
- Add `enable_tls_wal_service_api` option to safekeeper's cmd arguments
- Propagate `tls_server_config` to `wal_service` if the option is
enabled
- Create `BACKGROUND_RUNTIME` for small background tasks and offload SSL
certificate reloader to it.
No integration tests for now because support from compute side is
required: https://github.com/neondatabase/cloud/issues/25823
## Problem
The pg_repack test can be flaky due to unpredictable `NOTICE` messages
about waiting for some processes.
E.g.,
```
INFO: repacking table "public.issue3_2"
+NOTICE: Waiting for 1 transactions to finish. First PID: 427
```
## Summary of changes
The `client_min_messages` set to `warning` for the regression tests.
## Problem
We run benchmarks in batches (five parallel jobs on different runners).
If any test in a batch fails, we won’t upload any results for that
batch, even for the tests that passed.
## Summary of changes
- Move the results upload to a separate step in the run-python-test-set
action, and execute this step even if tests fail.
## Problem
If all batched requests are excluded from the query by
`Timeine::get_rel_page_at_lsn_batched` (e.g. because they are past the
end of the relation), the read path would panic since it doesn't expect
empty queries. This is a change in behaviour that was introduced with
the scattered query implementation.
## Summary of Changes
Handle empty queries explicitly.
This makes it easier to add a different client implementation alongside
the current one. I started working on a new gRPC-based protocol to
replace the libpq protocol, which will introduce a new function like
`client_libpq`, but for the new protocol.
It's a little more readable with less indentation anyway.
## Problem
https://github.com/neondatabase/neon/actions/runs/14538136318/job/40790985693?pr=11645
failed, even though the relevant parts of the CI had passed and
auto-merge determined the PR is ready to merge. After that, commenting
failed.
## Summary of changes
- set GH_TOKEN for commenting after fast-forward failure
- allow merging with mergeable_state unstable
## Problem
Pageservers and safakeepers do not pass CA certificates to broker
client, so the client do not trust locally issued certificates.
- Part of https://github.com/neondatabase/cloud/issues/27492
## Summary of changes
- Change `ssl_ca_certs` type in PS/SK's config to `Pem` which may be
converted to both `reqwest` and `tonic` certificates.
- Pass CA certificates to storage broker client in PS and SK
## Problem
follow-up on https://github.com/neondatabase/neon/pull/11601
## Summary of changes
- serialize the start/end time using rfc3339 time string
- compute the size ratio of the compaction
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
This delivers some additional fixes and improvements to storcon managed
safekeeper timelines:
* use `i32::MAX` for the generation number of timeline deletion
* start the generation for new timelines at 1 instead of 0: this ensures
that the other components actually are generation enabled
* fix database operations we use for metrics
* use join in list_pending_ops to prevent the classical ORM issue where
one does many db queries
* use enums in `test_storcon_create_delete_sk_down`. we are adding a
second parameter, and having two bool parameters is weird.
* extend `test_storcon_create_delete_sk_down` with a test of whole
tenant deletion. this hasn't been tested before.
* remove some redundant logging contexts
* Don't require mutable access to the service lock for scheduling
pending ops in memory. In order to pull this off, create reconcilers
eagerly. The advantage is that we don't need mutable access to the
service lock that way any more.
Part of #9011
---------
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
## Problem
We need to test the stability of Neon.
## Summary of changes
The test runs random operations on a Neon project. It performs via the
Public API calls the following operations: `create a branch`, `delete a
branch`, `add a read-only endpoint`, `delete a read-only endpoint`,
`restore a branch to a random position in the past`. All the branches
and endpoints are loaded with `pgbench`.
---------
Co-authored-by: Peter Bendel <peterbendel@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We saw OOMs due to L0 compaction happening simultaneously for all shards
of the same tenant right after the shard split.
## Summary of changes
Lower the threshold so that we compact fewer files.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
https://github.com/neondatabase/neon/pull/11531 did not fully fix the
problem because the warning is part of the storcon instead of
pageserver.
## Summary of changes
Allow stale generation error in storcon.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`test_compute_startup_simple` and `test_compute_ondemand_slru_startup`
are failing.
This test implicitly asserts that the metrics.json endpoint succeeds and
returns all expected metrics, but doesn't make it easy to see what went
wrong if it doesn't (e.g. in this failure
https://neon-github-public-dev.s3.amazonaws.com/reports/main/14513210240/index.html#suites/13d8e764c394daadbad415a08454c04e/b0f92a86b2ed309f/)
In this case, it was failing because of a missing auth token, because it
was using `requests` directly instead of using the endpoint http client
type.
## Summary of changes
- Use endpoint http wrapper to get raise_for_status & auth token
## Problem
`Tenant` isn't really a whole tenant: it's just one shard of a tenant.
## Summary of changes
- Automated rename of Tenant to TenantShard
- Followup commit to change references in comments
## Problem
There are mentions of `ALLOW_BACKWARD_COMPATIBILITY_BREAKAGE` and
`ALLOW_FORWARD_COMPATIBILITY_BREAKAGE`, but in reality, this mechanism
doesn't work, so let's remove it to avoid confusion.
The idea behind it was to allow some breaking changes by adding a
special label to a PR that would `xfail` the test. However, in practice,
this means we would need to carry this label through all subsequent PRs
until the release (and artifact regeneration). This approach isn't
really viable, as it increases the risk of missing a compatibility break
in another PR.
## Summary of changes
- Remove mentions and handling of
`ALLOW_BACKWARD_COMPATIBILITY_BREAKAGE` /
`ALLOW_FORWARD_COMPATIBILITY_BREAKAGE`
## Problem
`pg-clients` can't start:
```
The workflow is not valid. .github/workflows/pg-clients.yml (Line: 44, Col: 3): Error calling workflow 'neondatabase/neon/.github/workflows/build-build-tools-image.yml@aa19f10e7e958fbe0e0641f2e8c5952ce3be44b3'. The nested job 'check-image' is requesting 'packages: read', but is only allowed 'packages: none'. .github/workflows/pg-clients.yml (Line: 44, Col: 3): Error calling workflow 'neondatabase/neon/.github/workflows/build-build-tools-image.yml@aa19f10e7e958fbe0e0641f2e8c5952ce3be44b3'. The nested job 'build-image' is requesting 'packages: write', but is only allowed 'packages: none'.
```
## Summary of changes
- Grant required `packages: write` permissions to the workflow
## Problem
Test lfc working set approximation becomes flaky after recent changes in
prefetch.
May be it is caused by updating HLL in `lfc_write`, may be by some other
reasons.
## Summary of changes
1. Disable autovacuum in this test (as possible source of extra page
accesses).
2. Increase upper boundary for WS approximation from 12 to 20.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
This is mostly a documentation update, but a few updates with regard to
neon_local, pageserver, and tests.
17 is our default for users in production, so dropping references to 16
makes sense.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Signed-off-by: Tristan Partin <tristan@neon.tech>
These various hacks were needed for the forward compatibility tests.
Enough time has passed since the merge that these are no longer needed.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
The proxy denies using `unwrap()`s in regular code, but we want to use
it in test code
and so have to allow it for each test block.
## Summary of changes
Set `allow-unwrap-in-tests = true` in clippy.toml and remove all
exceptions.
Testodrome measures uptime based on the failed requests and errors. In
case of testodrome request we send back error based on the service. This
will help us distinguish error types in testodrome and rely on the
uptime SLI.
## Problem
We currently only have gc-compaction statistics for each single
sub-compaction job.
## Summary of changes
Add meta statistics across all sub-compaction jobs scheduled.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
During shard ancestor compaction, we currently recompress all page
images as we move them into a new layer file. This is expensive and
unnecessary.
Resolves#11562.
Requires #11607.
## Summary of changes
Pass through compressed page images in `ImageLayerInner::filter()`.
1. Compute may generate WAL on shutdown. The test assumes that after
shutdown,
no further ingest happens. Tweak the compute shutdown to make the
assumption true.
2. Assertion of local layer count post cold migration is not right since
we may have downloaded
layers due to ingest. Remove it.
Closes https://github.com/neondatabase/neon/issues/11587
## Problem
To avoid recompressing page images during layer filtering, we need
access to the raw header and data from vectored reads such that we can
pass them through to the target layer.
Touches #11562.
## Summary of changes
Adds `VectoredBlob::raw_with_header()` to return a raw view of the
header+data, and updates `read()` to track it.
Also adds `blob_io::Header` with header metadata and decode logic, to
reuse for tests and assertions. This isn't yet widely used.
## Problem
Splits of large tenants (several TB) can cause a huge amount of shard
ancestor compaction work, which can overload Pageservers.
Touches https://github.com/neondatabase/cloud/issues/22532.
## Summary of changes
Add a setting `compaction_shard_ancestor` (default `true`) to disable
shard ancestor compaction on a per-tenant basis.
Finally figured out the right incantation. I had had this in my original
go, but due to some refactoring and apparently missed testing, I
committed a mistake. The reason this doesn't currently break anything is
that we bypass the authorization middleware when the "testing" cargo
feature is enabled.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
Metrics are saved in https://github.com/neondatabase/neon/pull/11559,
but the file is not matched by the attachment regex.
## Summary of changes
Make attachment regex match the metrics file.
## Problem
close https://github.com/neondatabase/neon/issues/11486, proceeding
https://github.com/neondatabase/neon/pull/11531
## Summary of changes
This patch fixes the rest 50% of instability of
`test_create_churn_during_restart`. During tenant warmup, we'll request
logical size; however, if the startup gets cancelled, we won't be able
to spawn the initial logical size calculation task that sets the
`cancel_wait_for_background_loop_concurrency_limit_semaphore`.
Therefore, we check `cancelled` before proceeding to get
`cancel_wait_for_background_loop_concurrency_limit_semaphore`. There
will still be a race if the timeline shutdown happens after L5710 and
before L5711, but it should be enough to reduce the flakiness of the
test.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We can't have more than one open release PR created on the same day (due
to non-unique enough branch names).
## Summary of changes
- Add time (hours and minutes) to RC PR branch names
- Also make sure we use UTC for releases
## Problem
When doing power-of-two shard splits (i.e. 4 → 8 → 16), we end up
rewriting all layers since half of the pages will be local due to
striping. This causes a lot of resource usage when splitting large
tenants.
## Summary of changes
Drop the threshold of local/total pages to 30%, to reduce the amount of
layer rewrites after splits.
## Problem
Shard ancestor compaction can be very expensive following shard splits
of large tenants. We currently rewrite garbage layers after shard splits
as well, which can be a significant amount of data.
Touches https://github.com/neondatabase/cloud/issues/22532.
## Summary of changes
Don't rewrite invisible layers after shard splits.
## Problem
https://github.com/neondatabase/neon/pull/11515 introduced a bug that
some key history cannot be verified.
If a key only exists above the horizon, the verification will fail for
its first occurrence because the history does not exist at that point.
As gc-compaction skips a key range whenever an error occurs, it might be
doing some wasted work in staging/prod now. But I'm not planning a
hotfix this week as the bug doesn't affect correctness/performance.
## Summary of changes
Allow keys with only above horizon history in the verification.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
There is too much delay between merging a PR into `main` and deploying
the changes to staging
## Summary of changes
- Trigger `deploy` job without waiting for `build-and-test-locally` job
## Problem
The information in the README.md contained errors, and some information
was missing.
## Summary of changes
Found errors are fixed, and new information is added.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
The `/__w/neon/neon` directory is mounted from host to container and
persists between runs.
Sometimes the next workflow run fails to delete it:
```
Deleting the contents of '/__w/neon/neon'
Error: File was unable to be removed Error: EACCES: permission denied, rmdir '/__w/neon/neon/allure-2.32.2/bin'
```
## Summary of changes
- Download and install allure to `/tmp` which exists in container only
Ref https://github.com/neondatabase/cloud/issues/27186
## Problem
Benchmarks results are inconsistent on existing small-metal runners
## Summary of changes
Introduce new `unit-perf` runners, and lets run benchmark on them.
The new hardware has slower, but consistent, CPU frequency - if run with
default governor schedutil.
Thus we needed to adjust some testcases' timeouts and add some retry
steps where hard-coded timeouts couldn't be increased without changing
the system under test.
-
[wait_for_last_record_lsn](6592d69a67/test_runner/fixtures/pageserver/utils.py (L193))
1000s -> 2000s
-
[test_branch_creation_many](https://github.com/neondatabase/neon/pull/11409/files#diff-2ebfe76f89004d563c7e53e3ca82462e1d85e92e6d5588e8e8f598bbe119e927)
1000s
-
[test_ingest_insert_bulk](https://github.com/neondatabase/neon/pull/11409/files#diff-e90e685be4a87053bc264a68740969e6a8872c8897b8b748d0e8c5f683a68d9f)
- with back throttling disabled compute becomes unresponsive for more
than 60 seconds (PG hard-coded client authentication connection timeout)
-
[test_sharded_ingest](https://github.com/neondatabase/neon/pull/11409/files#diff-e8d870165bd44acb9a6d8350f8640b301c1385a4108430b8d6d659b697e4a3f1)
600s -> 1200s
Right now there are only 2 runners of that class, and if we decide to go
with them, we have to check how much that type of runners we need, so
jobs not stuck with waiting for that type of runners available.
However we now decided to run those runners with governor performance
instead of schedutil.
This achieves almost same performance as previous runners but still
achieves consistent results for same commit
Related issue to activate performance governor on these runners
https://github.com/neondatabase/runner/pull/138
## Verification that it helps
### analyze runtimes on new runner for same commit
Table of runtimes for the same commit on different runners in
[run](https://github.com/neondatabase/neon/actions/runs/14417589789)
| Run | Benchmarks (1) | Benchmarks (2) |Benchmarks (3) |Benchmarks (4)
| Benchmarks (5) |
|--------|--------|---------|---------|---------|---------|
| 1 | 1950.37s | 6374.55s | 3646.15s | 4149.48s | 2330.22s |
| 2 | - | 6369.27s | 3666.65s | 4162.42s | 2329.23s |
| Delta % | - | 0,07 % | 0,5 % | 0,3 % | 0,04 % |
| with governor performance | 1519.57s | 4131.62s | - | - | - |
| second run gov. perf. | 1513.62s | 4134.67s | - | - | - |
| Delta % | 0,3 % | 0,07 % | - | - | - |
| speedup gov. performance | 22 % | 35 % | - | - | - |
| current desktop class hetzner runners (main) | 1487.10s | 3699.67s | -
| - | - |
| slower than desktop class | 2 % | 12 % | - | - | - |
In summary, the runtimes for the same commit on this hardware varies
less than 1 %.
---------
Co-authored-by: BodoBolero <peterbendel@neon.tech>
## Problem
Shard ancestor compaction doesn't currently log any global progress
information, only for the current batch.
## Summary of changes
Log the number of layers checked for eligibility this iteration, and the
total number of layers to check. This will indicate how far along the
total shard ancestor compaction has gotten for this iteration.
## Problem
Every time we make changes to the read path to fix a bug or add a
feature,
we end up adding another incomprehensible test.
## Summary of changes
Add some generic infrastructure for generating a layer map from a type
spec
and use that for a read path test. The test is randomized but uses a
fixed seed
by default. A fuzzing mode is available for confidence building.
See [Notion
page](https://www.notion.so/neondatabase/Read-Path-Unit-Testing-Fuzzing-1d1f189e0047806c8e5cd37781b0a350?pvs=4)
for a diagram of the layer map
used.
Just for fun I tried removing [this
commit](9990199cb4)
from https://github.com/neondatabase/neon/pull/11494
and it caught the bug in the normal mode (no fuzzing required).
## Problem
Sometimes it's useful to see the pageserver metrics after a test in
order to debug stuff.
For example, for https://github.com/neondatabase/neon/issues/11465 I'd
like to know
what the remote storage latencies are from the client.
## Summary of changes
When stopping the env, record the pageserver metrics into a file in the
pageserver's workdir.
## Problem
Part of https://github.com/neondatabase/neon/issues/11486
## Summary of changes
50% of the test instability of `test_create_churn_during_restart` are
due to error message gets changed. Allow the new error message.
Still need to fix other errors due to failure to acquire semaphore in
this or the next patch.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Pageservers now ignore unknown config fields, so this config tweaking is
no longer needed.
## Summary of changes
Get rid of the hack.
Closes https://github.com/neondatabase/neon/issues/11524
## Problem
https://github.com/neondatabase/neon/pull/11494 changes the batching
logic, but we don't have a way to evaluate it.
## Summary of changes
This PR introduces a global and per timeline metric which tracks the
reason for
which a batch was broken.
In #10063 we will switch BlobWriter to use the owned buffers IO buffered
writer, which implements double-buffering by virtue of a background task
that performs the flushing.
That task's lifecylce must be contained within the Timeline lifecycle,
so, it must hold the timeline gate open and respect Timeline::cancel.
This PR does the noisy plumbing to reduce the #10063 diff.
Refs
- extracted from https://github.com/neondatabase/neon/pull/10063
- epic https://github.com/neondatabase/neon/issues/9868
We have already migrated the storage controller to
`--control-plane-url`, added in #11173. The new param was added to
support also safekeeper specific endpoints. See the docs changes in
#11195 for further details.
Part of #11163
## Problem
clang produce warning about unused variable `n_synced` in
HandleSafekeeperResponse
## Summary of changes
Remove local variable.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Get page batching stops when we encounter requests at different LSNs.
We are leaving batching factor on the table.
## Summary of changes
The goal is to support keys with different LSNs in a single batch and
still serve them with a single vectored get.
Important restriction: the same key at different LSNs is not supported
in one batch. Returning different key
versions is a much more intrusive change.
Firstly, the read path is changed to support "scattered" queries. This
is a conceptually simple step from
https://github.com/neondatabase/neon/pull/11463. Instead of initializing
the fringe for one keyspace,
we do it for multiple at different LSNs and let the logic already
present into the fringe handle selection.
Secondly, page service code is updated to support batching at different
LSNs. Eeach request parsed from the wire determines its effective
request LSN and keeps it in mem for the batcher toinspect. The batcher
allows keys at
different LSNs in one batch as long one key is not requested at
different LSNs.
I'd suggest doing the first pass commit by commit to get a feel for the
changes.
## Results
I used the batching test from [Christian's
PR](https://github.com/neondatabase/neon/pull/11391) which increases the
change of batch breaks. Looking at the logs I think the new code is at
the max batching factor for the workload (we
only break batches due to them being oversized or because the executor
is idle).
```
Main:
Reasons for stopping batching: {'LSN changed': 22843, 'of batch size': 33417}
test_throughput[release-pg16-50-pipelining_config0-30-100-128-batchable {'max_batch_size': 32, 'execution': 'concurrent-futures', 'mode': 'pipelined'}].perfmetric.batching_factor: 14.6662
My branch:
Reasons for stopping batching: {'of batch size': 37024}
test_throughput[release-pg16-50-pipelining_config0-30-100-128-batchable {'max_batch_size': 32, 'execution': 'concurrent-futures', 'mode': 'pipelined'}].perfmetric.batching_factor: 19.8333
```
Related: https://github.com/neondatabase/neon/issues/10765
## Problem
See https://github.com/neondatabase/neon/issues/10652
Neon extension launches 2 BGW which reduce limit for parallel workers
and so affecting parallel_deadlock isolation test.
## Summary of changes
Increase `max_worker_processes` from default 8 to 16 for isolation test.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Part of #9114
There was a debug-mode verification mode that verifies at every
retain_lsn. However, the code was tangled within the actual history
generation itself and it's hard to reason about correctness. This patch
adds a separate post-verification of the gc-compaction result that redos
logs at every retain_lsn and every record above the GC horizon. This
ensures that all key history we produce with gc-compaction is readable,
and if there're read errors after gc-compaction, it can only be
read-path errors instead of gc-compaction bugs.
## Summary of changes
* Add gc_compaction_verification flag, default to true.
* Implement a post-verification process.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Shard ancestor compaction does not yield for L0 compaction, potentially
starving it.
close https://github.com/neondatabase/neon/issues/11125
## Summary of changes
* Yield for L0 during shard ancestor compaction.
* Return `CompactionOutcome::Pending` when limited by `rewrite_max`, for
eager rescheduling.
Previously, the structure of the spec file was just the compute spec.
However, the response from the control plane get spec request included
the compute spec and the compute_ctl config. This divergence was
hindering other work such as adding regression tests for compute_ctl
HTTP authorization.
Signed-off-by: Tristan Partin <tristan@neon.tech>
Introduces a `WalIngestError` struct together with a
`WalIngestErrorKind` enum, to be used for walingest related failures and
errors.
* the enum captures backtraces, so we don't regress in comparison to
`anyhow::Error`s (backtraces might be a bit shorter if we use one of the
`anyhow::Error` wrappers)
* it explicitly lists most/all of the potential cases that can occur.
I've originally been inspired to do this in #11496, but it's a
longer-term TODO.
## Problem
Shard ancestor compaction always logs "starting shard ancestor
compaction", even if there is no work to do. This is very spammy (every
20 seconds for every shard). It also has limited progress logging.
## Summary of changes
* Only log "starting shard ancestor compaction" when there's work to do.
* Include details about the amount of work.
* Log progress messages for each layer, and when waiting for uploads.
* Log when compaction is completed, with elapsed duration and whether
there is more work for a later iteration.
## Problem
The `pagebench` benchmarks set up an initial dataset by creating a
template tenant, copying the remote storage to a bunch of new tenants,
and attaching them to Pageservers.
In #11420, we found that
`test_pageserver_characterize_throughput_with_n_tenants` had degraded
performance because it set a custom tenant config in Pageservers that
was then replaced with the default tenant config by the storage
controller.
The initial fix was to register the tenants directly in the storage
controller, but this created the tenants with generation 1. This broke
`test_basebackup_with_high_slru_count`, where the template tenant was at
generation 2, leading to all layer files at generation 2 being ignored.
Resolves#11485.
Touches #11381.
## Summary of changes
This patch addresses both test issues by modifying `attach_hook` to also
take a custom tenant config. This allows attaching tenants to
Pageservers from pre-existing remote storage, specifying both the
generation and tenant config when registering them in the storage
controller.
The batching perf test workload is currently read-only sequential scans.
However, realistic workloads have concurrent writes (to other pages)
going on.
This PR simulates concurrent writes to other pages by emitting logical
replication messages.
These degrade the achieved batching factor, for the reason see
- https://github.com/neondatabase/neon/issues/10765
PR
- https://github.com/neondatabase/neon/pull/11494
will fix this problem and get batching factor back up.
---------
Co-authored-by: Vlad Lazar <vlad@neon.tech>
# Refs
- fixes https://github.com/neondatabase/neon/issues/11395
# Problem
Since 2025-03-10, we have observed increased flakiness of
`test_pageserver_getpage_throttle`.
The test is timing-dependent by nature, and was hitting the
```
assert duration_secs >= 10 * actual_smgr_query_seconds, (
"smgr metrics should not include throttle wait time"
)
```
quite frequently.
# Analysis
These failures are not reproducible.
In this PR's history is a commit that reran the test 100 times without
requiring a single retry.
In https://github.com/neondatabase/neon/issues/11395 there is a link to
a query to the test results database.
It shows that the flakiness was not constant, but rather episodic:
2025-03-{10,11,12,13} 2025-03-{19,20,21} 2025-03-31 and 2025-04-01.
To me, this suggests variability in available CPU.
# Solution
The point of the offending assertion is to ensure that most of the
request latency is spent on throttling, because testing of the
throttling mechanism is the point of the test.
The `10` magic number means at most 10% of mean latency may be spent on
request processing.
Ideally we would control the passage of time (virtual clock source) to
make this test deterministic.
But I don't see that happening in our regression test setup.
So, this PR de-flakes the test as follows:
- allot up to 66% of mean latency for request processing
- increase duration from 10s to 20s, hoping to get better protection
from momentary CPU spikes in noisy neighbor tests or VMs on the runner
host
As a drive-by, switch to `pytest.approx` and remove one self-test
assertion I can't make sense of anymore.
## Problem
We need to export some metrics about certs/connections to configure
alerts and make sure that all HTTP requests are gone before turning
https-only mode on.
- Closes: https://github.com/neondatabase/cloud/issues/25526
## Summary of changes
- Add started connection and connection error metrics to http/https
Server.
- Add certificate expiration time and reload metrics to
ReloadingCertificateResolver.
Because it wasn't recursive, there was a limit to the depth of updates.
This work is necessary because as we teach neon_local and compute_ctl
that the content in --spec-path should match a similar structure we get
from the control plane, the spec object itself will no longer be
toplevel. It will be under the "spec" key.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
This test is slow to execute, particularly if you're on a slow
environment like vscode in a browser. Might have got much slower when we
switched to direct IO?
## Summary of changes
- Reduce the scale of the test by 10x, since there was nothing special
about the original size.
## Problem
The graceful leadership transfer process involves calling step_down on
the old controller, but this was not waiting for shard splits to
complete, and the new controller could therefore end up trying to abort
a shard split while it was still going on.
We mitigated this already in #11256 by avoiding the case where shard
split completion would update the database incorrectly, but this was a
fragile fix because it assumes that is the only problematic part of the
split running concurrently.
Precursors:
- #11290
- #11256Closes: #11254
## Summary of changes
- Hold the reconciler gate from shard splits, so that step_down will
wait for them. Splits should always be fairly prompt, so it is okay to
wait here.
- Defense in depth: if step_down times out (hardcoded 10 second limit),
then fully terminate the controller process rather than letting it
continue running, potentially doing split-brainy things. This makes
sense because the new controller will always declare itself leader
unilaterally if step_down fails, so leaving an old controller running is
not beneficial.
- Tests: extend
`test_storage_controller_leadership_transfer_during_split` to separately
exercise the case of a split holding up step_down, and the case where
the overall timeout on step_down is hit and the controller terminates.
## Problem
Part of https://github.com/neondatabase/neon/issues/10395
## Summary of changes
Add a test case to ensure gc-compaction doesn't fire any critical errors
if the key history is invalid due to partial GC.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Pass more neon ids to compute_ctl.
Expose them to postgres as neon extension GUCs:
neon.project_id, neon.branch_id, neon.endpoint_id.
This is the compute side PR, not yet supported by cplane.
## Problem
`test_location_conf_churn` performs random location updates on
Pageservers. While doing this, it could instruct the compute to connect
to a stale generation and execute queries. This is invalid, and will
fail if a newer generation has removed layer files used by the stale
generation.
Resolves#11348.
## Summary of changes
Only connect to the latest generation when executing queries.
## Problem
Walproposer should get elected and commit WAL on safekeepers specified
by the membership configuration.
## Summary of changes
- Add to wp `members_safekeepers` and `new_members_safekeepers` arrays
mapping configuration members to connection slots. Establish this
mapping (by node id) when safekeeper sends greeting, giving its id and
when mconf becomes known / changes.
- Add to TermsCollected, VotesCollected,
GetAcknowledgedByQuorumWALPosition membership aware logic. Currently it
partially duplicates existing one, but we'll drop the latter eventually.
- In python, rename Configuration to MembershipConfiguration for
clarity.
- Add test_quorum_sanity testing new logic.
ref https://github.com/neondatabase/neon/issues/10851
## Problem
Page service doesn't use TLS for incoming requests.
- Closes: https://github.com/neondatabase/cloud/issues/27236
## Summary of changes
- Add option `enable_tls_page_service_api` to pageserver config
- Propagate `tls_server_config` to `page_service` if the option is
enabled
No integration tests for now because I didn't find out how to call page
service API from python and AFAIK computes don't support TLS yet
It isn't used by the production control plane or neon_local. The removal
simplifies compute spec logic just a little bit more since we can remove
any notion of whether we should allow live reconfigurations.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
Part of #9114
## Summary of changes
Gc-compaction flag was not correctly set, causing it not getting
preempted by L0.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Part of #9114
## Summary of changes
Gc-compaction flag was not correctly set, causing it not getting
preempted by L0.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`test_location_conf_churn` often fails with `neither image nor delta
layer`, but doesn't say what the file actually is. However, past local
failures have indicated that it might be `.___temp` files.
Touches https://github.com/neondatabase/neon/issues/11348.
## Summary of changes
Ignore `.___temp` files when evicting local layers, and include the file
name in the error message.
## Problem
In some cases gc-compaction doesn't respond to the L0 compaction yield
notifier. I suspect it's stuck on getting the first item, and if so, we
probably need to let L0 yield notifier preempt `next_with_trace`.
## Summary of changes
- Add `time_to_first_kv_pair` to gc-compaction statistics.
- Inverse the ratio so that smaller ratio -> better compaction ratio.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Not a complete fix for https://github.com/neondatabase/neon/issues/11492
but should work for a short term.
Our current retry strategy for walredo is to retry every request exactly
once. This retry doesn't make sense because it retries all requests
exactly once and each error is expected to cause process restart and
cause future requests to fail. I'll explain it with a scenario of two
threads requesting redos: one with an invalid history (that will cause
walredo to panic) and another that has a correct redo sequence.
First let's look at how we handle retries right now in
do_with_walredo_process. At the beginning of the function it will spawn
a new process if there's no existing one. Then it will continue to redo.
If the process fails, the first process that encounters the error will
remove the walredo process object from the OnceCell, so that the next
time it gets accessed, a new process will be spawned; if it is the last
one that uses the old walredo process, it will kill and wait the process
in `drop(proc)`. I'm skeptical whether this works under races but I
think this is not the root cause of the problem. In this retry handler,
if there are N requests attached to a walredo process and the i-th
request fails (panics the walredo), all other N-i requests will fail and
they need to retry so that they can access a new walredo process.
```
time ---->
proc A None B
request 1 ^-----------------^ fail
uses A for redo replace with None
request 2 ^-------------------- fail
uses A for redo
request 3 ^----------------^ fail
uses A for redo last ref, wait for A to be killed
request 4 ^---------------
None, spawn new process B
```
The problem is with our retry strategy. Normally, for a system that we
want to retry on, the probability of errors for each of the requests are
uncorrelated. However, in walredo, a prior request that panics the
walredo process will cause all future walredo on that process to fail
(that's correlated).
So, back to the situation where we have 2 requests where one will
definitely fail and the other will succeed and we get the following
sequence, where retry attempts = 1,
* new walredo process A starts.
* request 1 (invalid) being processed on A and panics A, waiting for
retry, remove process A from the process object.
* request 2 (valid) being processed on A and receives pipe broken /
poisoned process error, waiting for retry, wait for A to be killed --
this very likely takes a while and cannot finish before request 1 gets
processed again
* new walredo process B starts.
* request 1 (invalid) being processed again on B and panics B, the whole
request fail.
* request 2 (valid) being processed again on B, and get a poisoned error
again.
```
time ---->
proc A None B None
request 1 ^-----------------^--------------^--------------------^
spawn A for redo fail spawn B for redo fail
request 2 ^--------------------^-------------------------^------------^
use A for redo fail, wait to kill A B for redo fail again
```
In such cases, no matter how we set n_attempts, as long as the retry
count applies to all requests, this sequence is bound to fail both
requests because of how they get sequenced; while we could potentially
make request 2 successful.
There are many solutions to this -- like having a separate walredo
manager for compactions, or define which errors are retryable (i.e.,
broken pipe can be retried, while real walredo error won't be retried),
or having a exclusive big lock over the whole redo process (the current
one is very fine-grained). In this patch, we go with a simple approach:
use different retry attempts for different types of requests.
For gc-compaction, the attempt count is set to 0, so that it never
retries and consequently stops the compaction process -- no more redo
will be issued from gc-compaction. Once the walredo process gets
restarted, the normal read requests will proceed normally.
## Summary of changes
Add redo_attempt for each reconstruct value request to set different
retry policies.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Erik Grinaker <erik@neon.tech>
## Problem
our large oltp benchmark runs very long - we want to remove the duration
of the reindex step.
we don't run concurrent workload anyhow but added "concurrently" only to
have a "prod-like" approach. But if it just doubles the time we report
because it requires two instead of one full table scan we can remove it
## Summary of changes
remove keyword concurrently from the reindex step
Instead of encoding a certain structure for claims, let's allow the
caller to specify what claims be encoded.
Signed-off-by: Tristan Partin <tristan@neon.tech>
We'd like to run benchmarks starting from a steady state. To this end,
do a reconciliation round before proceeding with the benchmark.
This is useful for benchmarks that use tenant dir snapshots since a
non-standard tenant configuration is used to generate the snapshot. The
storage controller is not aware of the non default tenant configuration
and will reconcile while the bench is running.
I like to run nightly clippy every so often to make our future rust
upgrades easier. Some notable changes:
* Prefer `next_back()` over `last()`. Generic iterators will implement
`last()` to run forward through the iterator until the end.
* Prefer `io::Error::other()`.
* Use implicit returns
One case where I haven't dealt with the issues is the now
[more-sensitive "large enum variant"
lint](https://github.com/rust-lang/rust-clippy/pull/13833). I chose not
to take any decisions around it here, and simply marked them as allow
for now.
## Problem
We wish to improve pageserver batching such that one batch can contain
requests for
pages at different LSNs. The current shape of the code doesn't lend
itself to the change.
## Summary of changes
Refactor the read path such that the fringe gets initialized upfront.
This is where the multi LSN
change will plug in. A couple other small changes fell out of this.
There should be NO behaviour change here. If you smell one, shout!
I recommend reviewing commits individually (intentionally made them as
small as possible).
Related: https://github.com/neondatabase/neon/issues/10765
## Problem
Now `get_timestamp_of_lsn` returns `404 NotFound` if there is no clog
pages for given LSN, and it's difficult to distinguish from other 404
errors. A separate status code for this error will allow the control
plane to handle this case.
- Closes: https://github.com/neondatabase/neon/issues/11439
- Corresponding PR in control plane:
https://github.com/neondatabase/cloud/pull/27125
## Summary of changes
- Return `412 PreconditionFailed` instead of `404 NotFound` if no
timestamp is fond for given LSN.
I looked briefly through the current error handling code in cloud.git
and the status code change should not affect anything for the existing
code. Change from the corresponding PR also looks fine and should work
with the current PS status code. Additionally, here is OK to merge it
from control plane team:
https://github.com/neondatabase/neon/issues/11439#issuecomment-2789327552
---------
Co-authored-by: John Spray <john@neon.tech>
pagestore_smgr.c had grown pretty large. Split into two parts, such
that the smgr routines that PostgreSQL code calls stays in
pagestore_smgr.c, and all the prefetching logic and other lower-level
routines related to communicating with the pageserver are moved to a
new source file, "communicator.c".
There are plans to replace communicator parts with a new
implementation. See https://github.com/neondatabase/neon/pull/10799.
This commit doesn't implement any of the new things yet, but it is
good preparation for it. I'm imagining that the new implementation
will approximately replace the current "communicator.c" code, exposing
roughly the same functions to pagestore_smgr.c.
This commit doesn't change any functionality or behavior, or make any
other changes to the existing code: It just moves existing code
around.
The timeline stopping state is set much earlier than the cancellation
token is fired, so by checking for the stopping state, we can prevent
races with timeline shutdown where we issue a cancellation error but the
cancellation token hasn't been fired yet.
Fix#11427.
## Problem
The current stripe size of 256 MB is a bit large, and can cause load
imbalances across shards. A stripe size of 16 MB appears more reasonable
to avoid hotspots, although we don't see evidence of this in benchmarks.
Resolves https://github.com/neondatabase/cloud/issues/25634.
Touches https://github.com/neondatabase/cloud/issues/21870.
## Summary of changes
* Change the default stripe size to 16 MB.
* Remove `ShardParameters::DEFAULT_STRIPE_SIZE`, and only use
`pageserver_api::shard::DEFAULT_STRIPE_SIZE`.
* Update a bunch of tests that assumed a certain stripe size.
## Problem
Storcon will not start up if `use_https` is on and there are some
pageservers or safekeepers without https port in the database. Metrics
"how many nodes with https we have in DB" will help us to make sure that
`use_https` may be turned on safely.
- Part of https://github.com/neondatabase/cloud/issues/25526
## Summary of changes
- Add `storage_controller_https_pageserver_nodes`,
`storage_controller_safekeeper_nodes` and
`storage_controller_https_safekeeper_nodes` Prometheus metrics.
## Problem
With the recent improvements to L0 compaction responsiveness,
`test_create_snapshot` now ends up generating 10,000 layer files
(compared to 1,000 in previous snapshots). This increases the snapshot
size by 4x, and significantly slows down tests.
## Summary of changes
Increase the target layer size from 128 KB to 256 KB, and the L0
compaction threshold from 1 to 5. This reduces the layer count from
about 10,000 to 1,000.
## Problem
Support of unlogged build in DEBUG_COMPARE_LOCAL.
Neon SMGR treats present of local file as indicator of unlogged
relations.
But it doesn't work in DEBUG_COMPARE_LOCAL mode.
## Summary of changes
Use INIT_FORKNUM as indicator of unlogged file and create this file
while unlogged index build.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
`tenant_import`, used to import an existing tenant from remote storage
into a storage controller for support and debugging, assumed
`DEFAULT_STRIPE_SIZE` since this can't be recovered from remote storage.
In #11168, we are changing the stripe size, which will break
`tenant_import`.
Resolves#11175.
## Summary of changes
* Add `stripe_size` to the tenant manifest.
* Add `TenantScanRemoteStorageShard::stripe_size` and return from
`tenant_scan_remote` if present.
* Recover the stripe size during`tenant_import`, or fall back to 32768
(the original default stripe size).
* Add tenant manifest compatibility snapshot:
`2025-04-08-pgv17-tenant-manifest-v1.tar.zst`
There are no cross-version concerns here, since unknown fields are
ignored during deserialization where relevant.
## Problem
This is generated e.g. by `test_historic_storage_formats`, and causes
VSCode to list all the contained files as new.
## Summary of changes
Add `/artifact_cache` to `.gitignore`.
## Problem
For future gc-compaction tests when we support
https://github.com/neondatabase/neon/issues/10395
## Summary of changes
Add a new type of neon test WAL record that is conditionally applied
(i.e., only when image == the specified value). We can use this to mock
the situation where we lose some records in the middle, firing an error,
and see how gc-compaction reacts to it.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Service targeted for storing and retrieving LFC prewarm data.
Can be used for proxying S3 access for Postgres extensions like
pg_mooncake as well.
Requests must include a Bearer JWT token.
Token is validated using a pemfile (should be passed in infra/).
Note: app is not tolerant to extra trailing slashes, see app.rs
`delete_prefix` test for comments.
Resolves: https://github.com/neondatabase/cloud/issues/26342
Unrelated changes: gate a `rename_noreplace` feature and disable it in
`remote_storage` so as `object_storage` can be built with musl
## Problem
`test_scrubber_tenant_snapshot` is flaky with `request was dropped`
errors. More details are in the issue.
- Closes: https://github.com/neondatabase/neon/issues/11278
## Summary of changes
- Disable shard scheduling during pageservers restart
- Add `reconcile_until_idle` in the end of the test
Also, move the call to the lfc_init() function. It was weird to have it
in libpagestore.c, when libpagestore.c otherwise had nothing to do with
the LFC. Move it directly into _PG_init()
## Problem
If the local file cache is shrunk, so that we punch some holes in the
underlying file, the local_cache view displays the holes incorrectly.
See https://github.com/neondatabase/neon/issues/10770
## Summary of changes
Skip hole tags in the local_cache view.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Fix various small issues discovered during gc-compaction rollout.
## Summary of changes
- Log level changes: if errors are from gc-compaction, fire a warning
instead of errors or critical errors.
- Yield to L0 compaction more aggressively. Instead of checking every 1k
keys, we check on every key. Sometimes a single key reconstruct takes a
long time.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
Currently, the tenant manifest is only uploaded if there are offloaded
timelines. The checks are also a bit loose (e.g. only checks number of
offloaded timelines). We want to start using the manifest for other
things too (e.g. stripe size).
Resolves#11271.
## Summary of changes
This patch ensures that a tenant manifest always exists. The lifecycle
is:
* During preload, fetch the existing manifest, if any.
* During attach, upload a tenant manifest if it differs from the
preloaded one (or does not exist).
* Upload a new manifest as needed, if it differs from the last-known
manifest (ignoring version number).
* On splits, pre-populate the manifest from the parent.
* During Pageserver physical GC, remove old manifests but keep the
latest 2 generations.
This will cause nearly all existing tenants to upload a new tenant
manifest on their first attach after this change. Attaches are
concurrency-limited in the storage controller, so we expect this will be
fine.
Also updates `make_broken` to automatically log at `INFO` level when the
tenant has been cancelled, to avoid spurious error logs during shutdown.
## Problem
If a tenant is cancelled (e.g. due to Pageserver shutdown) during
attach, it is set to `Broken`. This results both in error log spam and
500 responses for clients -- shutdown is supposed to return 503
responses which can be retried.
This becomes more likely to happen with #11328, where we perform tenant
manifest downloads/uploads during attach.
## Summary of changes
Set tenant state to `Stopping` when attach fails and the tenant is
cancelled, downgrading the log messages to INFO. This introduces two
variants of `Stopping` -- with and without a caller barrier -- where the
latter is used to signal attach cancellation.
Before we specified the JWT via `SAFEKEEPER_AUTH_TOKEN`, but env vars
are quite public, both in procfs as well as the unit files. So add a way
to put the auth token into a file directly.
context: https://neondb.slack.com/archives/C033RQ5SPDH/p1743692566311099
The 'neon_read' function needs to have a different prototype on PG < 16,
because it's part of the smgr interface. But neon_read_at_lsn doesn't
have that restriction.
## Problem
The shared libraries preloaded by default interfered with the
`pg_regress` tests on staging, causing wrong results
## Summary of changes
The projects used for these tests are now free from unnecessary
extensions. Some changes were made in patches.
Remove useless and often wrong IDENTIFICATION comments. PostgreSQL
sources have them, mostly for historical reasons, but there's no need
for us to copy that style.
Remove unnecessary #includes in header files, putting the #includes
directly in the .c files that need them. The principle is that a header
file should #include other header files if they need definitions from
them, such that each header file can be compiled on its own, but not
other #includes. (There are tools to enforce that, but this was just a
manual clean up of violations that I happened to spot.)
## Problem
The `pg_embedding` extension has been deprecated and can cause issues
with recent changes such as with
https://github.com/neondatabase/neon/issues/10973
Issue: `PG:2025-04-03 15:39:25.498 GMT
ttid=a4de5bee50225424b053dc64bac96d87/d6f3891b8f968458b3f7edea58fb3c6f
sqlstate=58P01 [15526] ERROR: could not load library
"/usr/local/lib/embedding.so": /usr/local/lib/embedding.so: undefined
symbol: SetLastWrittenLSNForRelation`
## Summary of changes
Removed `pg_embedding` extension from the compute image.
## Problem
We don't have metrics to exactly quantify the end user impact of
on-demand downloads.
Perf tracing is underway (#11140) to supply us with high-resolution
*samples*.
But it will also be useful to have some aggregate per-timeline and
per-instance metrics that definitively contain all observations.
## Summary of changes
This PR consists of independent commits that should be reviewed
independently.
However, for convenience, we're going to merge them together.
- refactor(metrics): measure_remote_op can use async traits
- impr(pageserver metrics): task_kind dimension for
remote_timeline_client latency histo
- implements https://github.com/neondatabase/cloud/issues/26800
- refs
https://github.com/neondatabase/cloud/issues/26193#issuecomment-2769705793
- use the opportunity to rename the metric and add a _global suffix;
checked grafana export, it's only used in two personal dashboards, one
of them mine, the other by Heikki
- log on-demand download latency for expensive-to-query but precise
ground truth
- metric for wall clock time spent waiting for on-demand downloads
## Refs
- refs https://github.com/neondatabase/cloud/issues/26800
- a bunch of minor investigations / incidents into latency outliers
# Refs
- refs https://github.com/neondatabase/neon/issues/8915
- discussion thread:
https://neondb.slack.com/archives/C033RQ5SPDH/p1742406381132599
- stacked atop https://github.com/neondatabase/neon/pull/11298
- corresponding internal docs update that illustrates how this PR
removes friction: https://github.com/neondatabase/docs/pull/404
# Problem
Rejecting `pageserver.toml`s with unknown fields adds friction,
especially when using `pageserver.toml` fields as feature flags that
need to be decommissioned.
See the added paragraphs on `pageserver_api::models::ConfigToml` for
details on what kind of friction it causes.
Also read the corresponding internal docs update linked above to see a
more imperative guide for using `pageserver.toml` flags as feature
flags.
# Solution
## Ignoring unknown fields
Ignoring is the serde default behavior.
So, just remove `serde(deny_unknown_fields)` from all structs in
`pageserver_api::config::ConfigToml`
`pageserver_api::config::TenantConfigToml`.
I went through all the child fields and verified they don't use
`deny_unknown_fields` either, including those shared with
`pageserver_api::models`.
## Warning about unknown fields
We still want to warn about unknown fields to
- be informed about typos in the config template
- be reminded about feature-flag style configs that have been cleaned up
in code but not yet in config templates
We tried `serde_ignore` (cf draft #11319) but it doesn't work with
`serde(flatten)`.
The solution we arrived at is to compare the on-disk TOML with the TOML
that we produce if we serialize the `ConfigToml` again.
Any key specified in the on-disk TOML but not present in the serialized
TOML is flagged as an ignored key.
The mechanism to do it is a tiny recursive decent visitor on the
`toml_edit::DocumentMut`.
# Future Work
Invalid config _values_ in known fields will continue to fail pageserver
startup.
See
- https://github.com/neondatabase/cloud/issues/24349
for current worst case impact to deployments & ideas to improve.
# Problem
Current perf tracing fields do not allow answering the question what a
specific Postgres backend was waiting for.
# Background
For Pageserver logs, we set the backend PID as the libpq
`application_name` on the compute side, and funnel that into the a
tracing field for the spans that emit to the global tracing subscriber.
# Solution
Funnel `application_name`, and the other fields that we use in the
logging spans, into the root span for perf tracing.
# Refs
- fixes https://github.com/neondatabase/neon/issues/11393
- stacked atop https://github.com/neondatabase/neon/pull/11433
- epic: https://github.com/neondatabase/neon/issues/9873
## Problem
We've started sending slack notifications for failed container image
pushes that are being retried. There are more messages coming in than
expected, so clicking through the link to see what image failed is
happening more often than we hoped.
## Summary of changes
- Make slack notifications clearer, including whether the job succeeded
and what retries have happened.
- Log failures/retries in step more clearly, so that you can easily see
when something fails.
## Problem
Postgres build fails with the following error on macOS:
```
/Users/bayandin/work/neon//vendor/postgres-v14/src/port/snprintf.c:424:27: error: 'strchrnul' is only available on macOS 15.4 or newer [-Werror,-Wunguarded-availability-new]
424 | const char *next_pct = strchrnul(format + 1, '%');
| ^~~~~~~~~
/Users/bayandin/work/neon//vendor/postgres-v14/src/port/snprintf.c:376:14: note: 'strchrnul' has been marked as being introduced in macOS 15.4 here, but the deployment target is macOS 15.0.0
376 | extern char *strchrnul(const char *s, int c);
| ^
/Users/bayandin/work/neon//vendor/postgres-v14/src/port/snprintf.c:424:27: note: enclose 'strchrnul' in a __builtin_available check to silence this warning
424 | const char *next_pct = strchrnul(format + 1, '%');
| ^~~~~~~~~
425 |
426 | /* Dump literal data we just scanned over */
427 | dostr(format, next_pct - format, target);
428 | if (target->failed)
429 | break;
430 |
431 | if (*next_pct == '\0')
432 | break;
433 | format = next_pct;
|
1 error generated.
```
## Summary of changes
- Update Postgres fork to include changes from
6da2ba1d8a
Corresponding Postgres PRs:
- https://github.com/neondatabase/postgres/pull/608
- https://github.com/neondatabase/postgres/pull/609
- https://github.com/neondatabase/postgres/pull/610
- https://github.com/neondatabase/postgres/pull/611
## Problem
https://github.com/neondatabase/neon/pull/11140 introduces performance
tracing with OTEL
and a pageserver config which configures the sampling ratio of get page
requests.
Enabling a non-zero sampling ratio on a per region basis is too
aggressive and comes with perf
impact that isn't very well understood yet.
## Summary of changes
Add a `sampling_ratio` tenant level config which overrides the
pageserver level config.
Note that we do not cache the config and load it on every get page
request such that changes propagate
timely.
Note that I've had to remove the `SHARD_SELECTION` span to get this to
work. The tracing library doesn't
expose a neat way to drop a span if one realises it's not needed at
runtime.
Closes https://github.com/neondatabase/neon/issues/11392
## Problem
IO metrics for secondary locations do not get deregistered when the
timeline is removed.
## Summary of changes
Stash the request context to be used for downloads in
`SecondaryTimelineDetail`. These objects match the lifetime of the
secondary timeline location pretty well.
When the timeline is removed, deregister the metrics too.
Closes https://github.com/neondatabase/neon/issues/11156
## Problem
Changes in compute can cause errors in tests if another version of
`neon-test-extensions` image is used.
## Summary of changes
Use the same version of `neon-test-extensions` image as `compute` one
for docker-compose based extension tests.
## Problem
There are some places in the code where we create `reqwest::Client`
without providing SSL CA certs from `ssl_ca_file`. These will break
after we enable TLS everywhere.
- Part of https://github.com/neondatabase/cloud/issues/22686
## Summary of changes
- Support `ssl_ca_file` in storage scrubber.
- Add `use_https_safekeeper_api` option to safekeeper to use https for
peer requests.
- Propagate SSL CA certs to storage_controller/client, storcon's
ComputeHook, PeerClient and maybe_forward.
Previously we attempted to download all extensions in CREATE EXTENSION
statements. Extensions like pg_stat_statements and neon are not remote
extensions, but still we were requesting them when
skip_pg_catalog_updates was set to false.
Fixes: https://github.com/neondatabase/neon/issues/11127
Signed-off-by: Tristan Partin <tristan@neon.tech>
Adds a test `test_storcon_create_delete_sk_down` which tests the
reconciler and pending op persistence if faced with a temporary
safekeeper downtime during timeline creation or deletion. This is in
contrast to `test_explicit_timeline_creation_storcon`, which tests the
happy path.
We also do some fixes:
* timeline and tenant deletion http requests didn't expect a body, but
`()` sent one.
* we got the tenant deletion http request's return type wrong: it's
supposed to be a hash map
* we add some logging to improve observability
* We fix `list_pending_ops` which had broken code meant to make it
possible to restrict oneself to a single pageserver. But diesel doesn't
support that sadly, or at least I couldn't figure out a way to make it
work. We don't need that functionality, so remove it.
* We add an info span to the heartbeater futures with the node id, so
that there is no context-free msgs like "Backoff: waiting 1.1 seconds
before processing with the task" in the storcon logs. we could also add
the full base url of the node but don't do it as most other log lines
contain that information already, and if we do duplication it should at
least not be verbose. One can always find out the base url from the node
id.
Successor of #11261
Part of #9011
Log the created project and endpoint IDs and improve typing in the
source code to improve readability.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We switched `h2` from 4.1.0 to a git commit to fix stubgen (in
https://github.com/neondatabase/neon/pull/10491). `h2` 4.2.0 was
released soon after that, so we can switch back to a pinned version.
Expected no changes, as 4.2.0 is the right next commit after the commit
we currently use:
dacd614fed%5E
## Summary of changes
- Bump `h2` to 4.2.0
## Problem
Part of https://github.com/neondatabase/neon/issues/11318
It's not 100% safe for now to run gc-compaction over the sparse
keyspace. It might cause deleted file to re-appear if a specific
sequence of operations are done as in the issue, which in reality
doesn't happen due to how we split delta/image layers based on the key
range.
A long-term fix would be either having a separate gc-compaction code
path for metadata keys (as how we have a different code path for
metadata image layer generation), or let the compaction process aware of
the information of "there's an image layer that doesn't contain a key"
so that we can skip the keys.
## Summary of changes
* gc-compaction auto trigger only triggers compaction over the normal
data range.
* do not hold gc_block_guard across the full compaction job, only hold
it during each subcompaction.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
The leadership transfer protocol between storage controller instances is
as follows, listing the steps for the new pod:
The new pod does these things:
1. new pod comes online. looks in database if there is a leader. if
there is, it asks that leader to step down.
2. the new pod does some operations to come online. they should be
fairly short timed, but it's not zero.
3. the new pod updates the leader entry in the database.
The old pod, once it gets the step down request, changes its internal
state to stepped down. It treats all incoming requests specially now:
instead of processing, it wants to forward them to the new pod. The
forwarding however only works if the new pod is online already, so
before forwarding it reads from the db for a leader (also to get the
address to forward to in the first place).
If the new pod is not online yet, i.e. during step 2 above, the old pod
might legitimately land in the branch which this patch is editing: the
leader in the database is a stepped down instance.
Before, we've returned a `ApiError::InternalServerError`, but that would
print the full backtrace plus an error log. With this patch, we cut down
on the noise, as it's an expected situation to have a short storcon
downtime while we are cutting over to the new instance. A
`ResourceUnavailable` error is not just more fitting, it also doesn't
print a backtrace once encountered, and only prints on the INFO log
level (see `api_error_handler` function).
Fixes#11320
cc #8954
Based on https://github.com/neondatabase/neon/pull/11139
## Problem
We want to export performance traces from the pageserver in OTEL format.
End goal is to see them in Grafana.
## Summary of changes
https://github.com/neondatabase/neon/pull/11139 introduces the
infrastructure required to run the otel collector alongside the
pageserver.
### Design
Requirements:
1. We'd like to avoid implementing our own performance tracing stack if
possible and use the `tracing` crate if possible.
2. Ideally, we'd like zero overhead of a sampling rate of zero and be a
be able to change the tracing config for a tenant on the fly.
3. We should leave the current span hierarchy intact. This includes
adding perf traces without modifying existing tracing.
To satisfy (3) (and (2) in part) a separate span hierarchy is used.
`RequestContext` gains an optional `perf_span` member
that's only set when the request was chosen by sampling. All perf span
related methods added to `RequestContext` are no-ops for requests that
are not sampled.
This on its own is not enough for (3), so performance spans use a
separate tracing subscriber. The `tracing` crate doesn't have great
support for this, so there's a fair amount of boilerplate to override
the subscriber at all points of the perf span lifecycle.
### Perf Impact
[Periodic
pagebench](https://neonprod.grafana.net/d/ddqtbfykfqfi8d/e904990?orgId=1&from=2025-02-08T14:15:59.362Z&to=2025-03-10T14:15:59.362Z&timezone=utc)
shows no statistically significant regression with a sample ratio of 0.
There's an annotation on the dashboard on 2025-03-06.
### Overview of changes:
1. Clean up the `RequestContext` API a bit. Namely, get rid of the
`RequestContext::extend` API and use the builder instead.
2. Add pageserver level configs for tracing: sampling ratio, otel
endpoint, etc.
3. Introduce some perf span tracking utilities and expose them via
`RequestContext`. We add a `tracing::Span` wrapper to be used for perf
spans and a `tracing::Instrumented` equivalent for it. See doc comments
for reason.
4. Set up OTEL tracing infra according to configuration. A separate
runtime is used for the collector.
5. Add perf traces to the read path.
## Refs
- epic https://github.com/neondatabase/neon/issues/9873
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
There are some cases where traditional gc might collect some layer files
causing gc-compaction cannot read the full history of the key. This
needs to be resolved in the long-term by improving the compaction
process. For now, let's simply avoid such errors triggering the circuit
breaker.
## Summary of changes
* Move the place where we trigger the circuit breaker. We only trigger
it during compactions other than L0 compactions. We added the trigger a
year ago due to file cleanup concerns in image layer compaction.
* For gc-compaction, only return errors to the upper
compaction_iteration if it's a shutdown error. Otherwise, just log it
and skip the compaction for a key range.
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Previously, if the observed state was refreshed and matching the intent,
we wouldn't send
a compute notification. This is unsafe. There's no guarantee that the
location landed on the
pageserver _and_ a compute notification for it was delivered.
See
https://github.com/neondatabase/neon/issues/11291#issuecomment-2743205411
for one such example.
## Summary of changes
Add a reproducer and notify the compute if the correct observed state
required a refresh.
Closes https://github.com/neondatabase/neon/issues/11291
## Problem
We had a problem with https://github.com/neondatabase/neon/pull/11413
having e2e tests failing, because an e2e test
(8d271bed47)
depended on an unreleased pageserver fix
(0ee5bfa2fc).
This came up because neon release CI runs against the most recent
releases of the other components, but cloud e2e tests run against
latest, which is tagged from main.
## Summary of changes
Add an additional `released` tag for released versions.
## Alternative to consider
We could (and maybe should) instead switch to `latest` being used for
released versions and `main` being used where we use `latest` right now.
That'd also mean we don't have to adjust the CI in the cloud repo.
## Problem
Exporting `file_cache_used` which specifies the number of used chunks in
the LFC. This helps calculate LFC utilization as: `file_cache_used_pages
/ (file_cache_used * file_cache_chunk_size_pages)`
## Summary of changes
Exporting `file_cache_used`.
Related Issue: https://github.com/neondatabase/cloud/issues/26688
We keep the practice of keeping the compiler up to date, pointing to the
latest release. This is done by many other projects in the Rust
ecosystem as well.
[Announcement blog
post](https://blog.rust-lang.org/2025/04/03/Rust-1.86.0.html).
Prior update was in #10914.
## Problem
Since
0f367cb665
the timeout in `with_client_retries` is implemented via `tokio::timeout`
instead of `reqwest::ClientBuilder::timeout` (because we reuse the
client). It changed the error representation if the timeout is exceeded.
Such errors were suppressed in `allowed_errors.py`, but old regexps do
not match the new error.
Discussion:
https://neondb.slack.com/archives/C033RQ5SPDH/p1743533184736319
## Summary of changes
- Add new `Timeout` error to `allowed_errors.py`
I've encountered this error in #11422. Ideally we'd have the URL as well
to associate it with a tenant, but at this level we only have the remote
addr I guess. Better than nothing.
## Problem
The test_pageserver_gc_compaction_smoke fails rather often due to a
timeout on slow machines.
See https://github.com/neondatabase/neon/issues/11355.
## Summary of changes
Increase the timeout for the test.
## Problem
We've seen quite a few CI failures related to pushes to docker hub
failing with weird error messages that indicate maybe docker hub is just
not reliable.
## Summary of changes
Retry container image pushing up to 10 times, and send a slack message
if we had to retry, regardless of the job succeeding or not.
## Problem
Pagebench creates a bunch of tenants by first creating a template tenant
and copying its remote storage, then attaching the copies to the
Pageserver.
These tenants had custom configurations to disable GC and compaction.
However, these configs were only picked up by the Pageserver on attach,
and not registered with the storage controller. This caused the storage
controller to replace the tenant configs with the default tenant config,
re-enabling GC and compaction which interferes with benchmark
performance.
Resolves#11381.
## Summary of changes
Register the copied tenants with the storage controller, instead of
directly attaching them to the Pageserver.
Right now we start safekeeper node ids at 0. However, other code treats
0 as invalid (see #11407). We decided on latter. Therefore, make the
register python tests register safekeepers starting at node id 1 instead
of 0, and forbid safekeepers with id 0 from registering.
Context:
https://github.com/neondatabase/neon/pull/11407#discussion_r2024852328
## Problem
close https://github.com/neondatabase/neon/issues/11279
## Summary of changes
* Allow passthrough of other methods in tenant timeline shard0
passthrough of storcon.
* Passthrough mark invisible API in storcon.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
In #11122, we changed the autosplit behavior to allow repeated and
initial splits. The defaults were set such that they retain the current
production settings (8 shards at 64 GB). However, these defaults don't
really make sense by themselves.
Once we deploy new settings to production, we should change the defaults
to something more reasonable.
## Summary of changes
Changes the following default settings:
* `max_split_shards`: 8 → 16
* `initial_split_threshold`: 64 GB → disabled
* `initial_split_shards`: 8 → 2
## Problem
Hotfix releases mean that sometimes changes in release PRs haven't been
tested and linted yet. Disabling tests and lints is therefore not
necessarily safe. In the future we will check whether tests have run on
the same git tree already to speed things up, but for now we need to
turn tests back on fully. This partially reverts:
https://github.com/neondatabase/neon/pull/11272
## Summary of changes
Run checks on `.*-rc-pr` runs.
## Problem
Tenants in attachment state `Stale` can't upload layers, and don't run
compaction, but still do periodic L0 layer flushes in the tenant
housekeeping loop. If the tenant remains stuck in stale mode, this
causes a large buildup of L0 layers, causing logging, metrics increases,
and possibly alerts.
Resolves#11245.
## Summary of changes
Don't perform periodic layer flushes in stale attachment state.
## Problem
Sometimes the forced extension upgrade test fails (on schedule) due to a
timeout.
## Summary of changes
The timeout is increased to 60 mins.
## Problem
In Neon DBaaS we adjust the shared_buffers to the size of the compute,
or better described we adjust the max number of connections to the
compute size and we adjust the shared_buffers size to the number of max
connections according to about the following sizes
`2 CU: 225mb; 4 CU: 450mb; 8 CU: 900mb`
[see](877e33b428/goapp/controlplane/internal/pkg/compute/computespec/pg_settings.go (L405))
## Summary of changes
We should run perf unit tests with settings that is realistic for a
paying customer and select 8 CU as the reference for those tests.
## Problem
Followup to https://github.com/neondatabase/neon/pull/10913
Existing chaos injection just does simple cutovers to secondary
locations. Let's also exercise code for doing graceful migrations. This
should implicitly test how such migrations cope with overlapping with
service restarts.
## Summary of changes
## Problem
ref https://github.com/neondatabase/neon/issues/11279
Imagine we have a branch with 3 snapshots A, B, and C:
```
base---+---+---+---main
\-A \-B \-C
base=100G, base-A=1G, A-B=1G, B-C=1G, C-main=1G
```
at this point, the synthetic size should be 100+1+1+1+1=104G.
after the deletion, the structure looks like:
```
base---+---+---+
\-A \-B \-C
```
If we simply assume main never exists, the size will be calculated as
size(A) + size(B) + size(C)=300GB, which obviously is not what the user
would expect.
The correct way to do this is to assume part of main still exists, that
is to say, set C-main=1G:
```
base---+---+---+main
\-A \-B \-C
```
And we will get the correct synthetic size of 100G+1+1+1=103G.
## Summary of changes
* Do not generate gc cutoff point for invisible branches.
* Use the same LSN as the last branchpoint for branch end.
* Remove test_api_handler for mark_invisible.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1741594233757489
Consider the following scenario:
1. Backend A wants to prefetch some block B
2. Backend A checks that block B is not present in shared buffer
3. Backend A registers new prefetch request and calls
prefetch_do_request
4. prefetch_do_request calls neon_get_request_lsns
5. neon_get_request_lsns obtains LwLSN for block B
6. Backend B downloads B, updates and wallogs it (let say to Lsn1)
7. Block B is once again thrown from shared buffers, its LwLSN is set to
Lsn1
8. Backend A obtains current flush LSN, let's say that it is Lsn1
9. Backend A stores Lsn1 as effective_lsn in prefetch slot.
10. Backend A reads page B with LwLSN=Lsn1
11. Backend A finds in prefetch ring response for prefetch request for
block B with effective_lsn=Lsn1, so that it satisfies
neon_prefetch_response_usable condition
12. Backend A uses deteriorated version of the page!
## Summary of changes
Use `not_modified_since` as `effective_lsn`.
It should not cause some degrade of performance because we store LwLSN
when it was not found in LwLSN hash, so if page is not changed till
prefetch response is arrived, then LwLSN should not be changed.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
This PR contains a bunch of smaller followups and fixes of the original
PR #11058. most of these implement suggestions from Arseny:
* remove `Queryable, Selectable` from `TimelinePersistence`: they are
not needed.
* no `Arc` around `CancellationToken`: it itself is an arc wrapper
* only schedule deletes instead of scheduling excludes and deletes
* persist and delete deletion ops
* delete rows in timelines table upon tenant and timeline deletion
* set `deleted_at` for timelines we are deleting before we start any
reconciles: this flag will help us later to recognize half-executed
deletions, or when we crashed before we could remove the timeline row
but after we removed the last pending op (handling these situations are
left for later).
Part of #9011
Add an optional `safekeepers` field to `TimelineInfo` which is returned
by the storcon upon timeline creation if the
`--timelines-onto-safekeepers` flag is enabled. It contains the list of
safekeepers chosen.
Other contexts where we return `TimelineInfo` do not contain the
`safekeepers` field, sadly I couldn't make this more type safe like done
in Rust via `TimelineCreateResponseStorcon`, as there is no way of
flattening or inheritance (and I don't that duplicating the entire type
for some minor type safety improvements is worth it).
The storcon side has been done in #11058.
Part of https://github.com/neondatabase/cloud/issues/16176
cc https://github.com/neondatabase/cloud/issues/16796
## Problem
`CompactFlags::NoYield` was a bit inconvenient, since every caller
except for the background compaction loop should generally set it (e.g.
HTTP API calls, tests, etc). It was also inconsistent with
`CompactionOutcome::YieldForL0`.
## Summary of changes
Invert `CompactFlags::NoYield` as `CompactFlags::YieldForL0`. There
should be no behavioral changes.
## Problem
For computes running inside NeonVM, the actual compute image tag is
buried inside the NeonVM spec, and we cannot get it as part of standard
k8s container metrics (it's always an image and a tag of the NeonVM
runner container). The workaround we currently use is to extract the
running computes info from the control plane database with SQL. It has
several drawbacks: i) it's complicated, separate DB per region; ii) it's
slow; iii) it's still an indirect source of info, i.e. k8s state could
be different from what the control plane expects.
## Summary of changes
Add a new `compute_ctl_up` gauge metric with `build_tag` and `status`
labels. It will help us to both overview what are the tags/versions of
all running computes; and to break them down by current status (`empty`,
`running`, `failed`, etc.)
Later, we could introduce low cardinality (no endpoint or compute ids)
streaming aggregates for such metrics, so they will be blazingly fast
and usable for monitoring the fleet-wide state.
## Problem
Commit
3da70abfa5
cause noticeable performance regression (40% in update-with-prefetch in
test_bulk_update):
https://neondb.slack.com/archives/C04BLQ4LW7K/p1742633167580879
## Summary of changes
Remove loop from pageserver_try_receive to make it fetch not more than
one response. There is still loop in `pump_prefetch_state` which can
fetch as many responses as available.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Previously we had different meanings for the bitmask of vector IOps.
That has now been unified to "bit set = final result, no more
scribbling".
Furthermore, the LFC read path scribbled on pages that were already
read; that's probably not a good thing so that's been fixed too. In
passing, the read path of LFC has been updated to read only the
requested pages into the provided buffers, thus reducing the IO size of
vectorized IOs.
## Problem
## Summary of changes
## Problem
Current version of GitHub Workflow Stats action pull docker images from
DockerHub, that could be an issue with the new pull limits on DockerHub
side.
## Summary of changes
Switch to version `v0.2.2`, with docker images hosted on `ghcr.io`
In sqlstate, we have a manual `phf` construction, which is not
explicitly guaranteed to be stable - you're intended to use a build.rs
or the macro to make sure it's constructed correctly each time. This was
inherited from tokio-postgres upstream, which has the same issue
(https://github.com/rust-phf/rust-phf/pull/321#issuecomment-2724521193).
We don't need this encoding of sqlstate, so I've switched it to simply
parse 5 bytes
(https://www.postgresql.org/docs/current/errcodes-appendix.html).
While here, I switched out log for tracing.
## Problem
Macro IS_LOCAL_REL used for DEBUG_COMPARE_LOCAL mode use greater-than
rather than greater-or-equal comparison while first table really is
assigned FirstNormalObjectId.
## Summary of changes
Replace strict greater with greater-or-equal comparison.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
`TYPE_CHECKING` is used inconsistently across Python tests.
## Summary of changes
- Update `ruff`: 0.7.0 -> 0.11.2
- Enable TC (flake8-type-checking):
https://docs.astral.sh/ruff/rules/#flake8-type-checking-tc
- (auto)fix all new issues
## Problem
Previously, L0 flushes would wait for uploads, as a simple form of
backpressure. However, this prevented flush pipelining and upload
parallelism. It has since been disabled by default and replaced by L0
compaction backpressure.
Touches https://github.com/neondatabase/cloud/issues/24664.
## Summary of changes
This patch removes L0 flush upload waits, along with the
`l0_flush_wait_upload`. This can't be merged until the setting has been
removed across the fleet.
## Problem
`github.sha` contains a merge commit of `head` and `base` if we're in a
PR. In release PRs, this makes no sense, because we fast-forward the
`base` branch to contain the changes from `head`.
Even though we correctly use `${{ github.event.pull_request.head.sha ||
github.sha }}` to reference the git commit when building artifacts, we
don't use that when checking out code, because we want to test the merge
of head and base usually. In the case of release PRs, we definitely
always want to test on the head sha though, because we're going to
forward that, and it already has the base sha as a parent, so the merge
would end up with the same tree anyway.
As a side effect, not checking out `${{
github.event.pull_request.head.sha || github.sha }}` also caused
https://github.com/neondatabase/neon/actions/runs/13986389780/job/39173256184#step:6:49
to say `release-tag=release-compute-8187`, while
https://github.com/neondatabase/neon/actions/runs/14084613121/job/39445314780#step:6:48
is talking about `build-tag=release-compute-8186`
## Summary of changes
Run a few things on `github.event.pull_request.head.sha`, if we're in a
release PR.
## Problem
Occasionally getting data from GH cache could be slow, with less than
10MB/s and taking 5+ minutes to download cache:
```
Received 20971520 of 2987085791 (0.7%), 9.9 MBs/sec
Received 50331648 of 2987085791 (1.7%), 15.9 MBs/sec
...
Received 1065353216 of 2987085791 (35.7%), 4.8 MBs/sec
Received 1065353216 of 2987085791 (35.7%), 4.7 MBs/sec
...
```
https://github.com/neondatabase/neon/actions/runs/13956437454/job/39068664599#step:7:17
Resulting in getting cache even longer that build time.
## Summary of changes
Switch to the caches, that are closer to the runners, and they provided
stable throughput about 70-80MB/s
## Problem
Some useful debugging tools are missing from the compute image and
sometimes it's impossible to install them because memory is tightly
packed.
## Summary of changes
Add the following tools: iproute2, lsof, screen, tcpdump.
The other changes come from sorting the packages alphabetically.
```bash
$ docker image inspect ghcr.io/neondatabase/vm-compute-node-v16:7555 | jaq '.[0].Size'
1389759645
$ docker image inspect ghcr.io/neondatabase/vm-compute-node-v16:14083125313 | jaq '.[0].Size'
1396051101
$ echo $((1396051101 - 1389759645))
6291456
```
To help with narrowing down
https://github.com/neondatabase/cloud/issues/26362, we make the case
more noisy where we are wait for the shutdown of a specific task (in the
case of that issue, the `gc_loop`).
…ng (#11308)"
This reverts commit e5aef3747c.
The logic of this commit was incorrect:
enabling audit requires a restart of the compute,
because audit extensions use shared_preload_libraries.
So it cannot be done in the configuration phase,
require endpoint restart instead.
## Problem
While working on bulk import, I want to use the `control-plane-url` flag
for a different request.
Currently, the local compute hook is used whenever no control plane is
specified in the config.
My test requires local compute notifications and a configured
`control-plane-url` which isn't supported.
## Summary of changes
Add a `use-local-compute-notifications` flag. When this is set, we use
the local flow regardless of other config values.
It's enabled by default in neon_local and disabled by default in all
other envs. I had to turn the flag off in tests
that wish to bypass the local flow, but that's expected.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
- We need to support multiple SSL CA certificates for graceful root CA
certificate rotation.
- Closes: https://github.com/neondatabase/cloud/issues/25971
## Summary of changes
- Parses `ssl_ca_file` as a pem bundle, which may contain multiple
certificates. Single pem cert is a valid pem bundle, so the change is
backward compatible.
## Problem
- Part of https://github.com/neondatabase/neon/issues/11113
- Building a new `reqwest::Client` for every request is expensive
because it parses CA certs under the hood. It's noticeable in storcon's
flamegraph.
## Summary of changes
- Reuse one `reqwest::Client` for all API calls to avoid parsing CA
certificates every time.
## Problem
Issue https://github.com/neondatabase/neon/issues/11254 describes a case
where restart during a shard split can result in a bad end state in the
database.
## Summary of changes
- Add a reproducer for the issue
- Tighten an existing safety check around updated row counts in
complete_shard_split
## Problem
Various aspects of the controller's job are already described in RFCs,
but the overall service didn't have an RFC that records design tradeoffs
and the top level structure.
## Summary of changes
- Add a retrospective RFC that should be useful for anyone understanding
storage controller functionality
## Problem
part of https://github.com/neondatabase/neon/issues/11279
## Summary of changes
The invisible flag is used to exclude a timeline from synthetic size
calculation. For the first step, let's persist this flag. Most of the
code are following the `is_archived` modification flow.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
SSL certs are loaded only during start up. It doesn't allow the rotation
of short-lived certificates without server restart.
- Closes: https://github.com/neondatabase/cloud/issues/25525
## Summary of changes
- Implement `ReloadingCertificateResolver` which reloads certificates
from disk periodically.
## Problem
Now that stuck connections are quickly terminated it's not easy to
quickly find the right port from the pid to correlate the connection
with the one seen on pageserver side.
## Summary of changes
Call getsockname() and include the local port number in the
no-response-from-pageserver log messages.
## Problem
Currently, we only split tenants into 8 shards once, at the 64 GB split
threshold. For very large tenants, we need to keep splitting to avoid
huge shards. And we also want to eagerly split at a lower threshold to
improve throughput during initial ingestion.
See
https://github.com/neondatabase/cloud/issues/22532#issuecomment-2706215907
for details.
Touches https://github.com/neondatabase/cloud/issues/22532.
Requires #11157.
## Summary of changes
This adds parameters and logic to enable repeated splits when a tenant's
largest timeline divided by shard count exceeds `split_threshold`, as
well as eager initial splits at a lower threshold to speed up initial
ingestion. The default parameters are all set such that they retain the
current behavior in production (only split into 8 shards once, at 64
GB).
* `split_threshold` now specifies a maximum shard size. When a shard
exceeds it, all tenant shards are split by powers of 2 such that all
tenant shards fall below `split_threshold`. Disabled by default, like
today.
* Add `max_split_shards` to specify a max shard count for autosplits.
Defaults to 8 to retain current behavior.
* Add `initial_split_threshold` and `initial_split_shards` to specify a
threshold and target count for eager splits of unsharded tenants.
Defaults to 64 GB and 8 shards to retain current production behavior.
Because this PR sets `initial_split_threshold` to 64 GB by default, it
has the effect of enabling autosplits by default. This was not the case
previously, since `split_threshold` defaults to None, but it is already
enabled across production and staging. This is temporary until we
complete the production rollout.
For more details, see code comments.
This must wait until #11157 has been deployed to Pageservers.
Once this has been deployed to production, we plan to change the
parameters to:
* `split-threshold`: 256 GB
* `initial-split-threshold`: 16 GB
* `initial-split-shards`: 4
* `max-split-shards`: 16
The final split points will thus be:
* Start: 1 shard
* 16 GB: 4 shards
* 1 TB: 8 shards
* 2 TB: 16 shards
We will then change the default settings to be disabled by default.
---------
Co-authored-by: John Spray <john@neon.tech>
## Problem
`fast_import` binary is being run inside neonvms, and they do not
support proper `kubectl describe logs` now, there are a bunch of other
caveats as well: https://github.com/neondatabase/autoscaling/issues/1320
Anyway, we needed a signal if job finished successfully or not, and if
not — at least some error message for the cplane operation. And after [a
short
discussion](https://neondb.slack.com/archives/C07PG8J1L0P/p1741954251813609),
that s3 object is the most convenient at the moment.
## Summary of changes
If `s3_prefix` was provided to `fast_import` call, any job run puts a
status object file into `{s3_prefix}/status/fast_import` with contents
`{"done": true}` or `{"done": false, "error": "..."}`. Added a test as
well
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1741176713523469
The problem is that this function is using `PQgetCopyData(shard->conn,
&resp_buff.data, 1 /* async = true */)`
to try to fetch next message. But this function returns 0 if the whole
message is not present in the buffer.
And input buffer may contain only part of message so result is not
fetched.
## Summary of changes
Use `PQisBusy` + `WaitEventSetWait` to check if data is available and
`PQgetCopyData(shard->conn, &resp_buff.data, 0)` to read whole message
in this case.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
If a tenant gets deleted, delete also all of its timelines. We assume
that by the time a tenant is being deleted, no new timelines are being
created, so we don't need to worry about races with creation in this
situation.
Unlike #11233, which was very simple because it listed the timelines and
invoked timeline deletion, this PR obtains a list of safekeepers to
invoke the tenant deletion on, and then invokes tenant deletion on each
safekeeper that has one or multiple timelines.
Alternative to #11233
Builds on #11288
Part of #9011
## Problem
Pageservers use unencrypted HTTP requests for storage controller API.
- Closes: https://github.com/neondatabase/cloud/issues/25524
## Summary of changes
- Replace hyper0::server::Server with http_utils::server::Server in
storage controller.
- Add HTTPS handler for storage controller API.
- Support `ssl_ca_file` in pageserver.
Timeline IDs do not contain characters that may cause a SQL injection,
but best to always play it safe.
Signed-off-by: Tristan Partin <tristan@neon.tech>
## Problem
We currently have this code duplicated across different PG versions.
Moving this to an extension would reduce duplication and simplify
maintenance.
## Summary of changes
Moving the LastWrittenLSN code from PG versions to the Neon extension
and linking it with hooks.
Related Postgres PR: https://github.com/neondatabase/postgres/pull/590
Closes: https://github.com/neondatabase/neon/issues/10973
---------
Co-authored-by: Tristan Partin <tristan@neon.tech>
## Problem
The pageserver upcall api was designed to work with control plane or the
storage controller.
We have completed the transition period and now the upcall api only
targets the storage controller.
## Summary of changes
Rename types accordingly and tweak some comments.
## Problem
We had a recent Postgres startup latency (`start_postgres_ms`)
degradation, but it was only caught with SLO alerts. There was actually
an existing test for the same purpose -- `start_postgres_ms`, but it's
doing only two starts, so it's a bit noisy.
## Summary of changes
Add new compute startup latency test that does 100 iterations and
reports p50, p90 and p99 latencies.
Part of https://github.com/neondatabase/cloud/issues/24882
## Problem
Some extensions do not contain tests, which can be easily run on top of
docker-compose or staging.
## Summary of changes
Added the pg_regress based tests for `pg_tiktoken`, `pgx_ulid`, `pg_rag`
Now they will be run on top of docker-compose, but I intend to adopt
them to be run on top staging in the next PRs
## Problem
We're seeing timeline creation failures that look suspiciously like some
race with the cleanup-deletion of initdb temporary directories. I
couldn't spot the bug, but we can make it a bit easier to debug.
Related: https://github.com/neondatabase/neon/issues/11296
## Summary of changes
- Avoid surfacing distracting ENOENT failure to delete as a log error --
this is fine, and can happen if timeline is cancelled while doing
initdb, or if initdb itself has an error where it doesn't write the dir
(this error is surfaced separately)
- Log after purging initdb temp directories
The only difference between
- `pageserver_api::models::TenantConfig` and
- `pageserver::tenant::config::TenantConfOpt`
at this point is that `TenantConfOpt` serializes with
`skip_serializing_if = Option::is_none`.
That is an efficiency improvement for all the places that currently
serde `models::TenantConfig` because new serializations will no longer
write `$fieldname: null` for each field that is `None` at runtime.
This should be particularly beneficial for Storcon, which stores
JSON-serialized `models::TenantConfig` in its DB.
# Behavior Changes
This PR changes the serialization behavior: we omit `None` fields
instead of serializing `$fieldname: null`).
So it's a data format change (see section on compatibility below).
And it changes API responses from Storcon and Pageserver.
## API Response Compatibility
Storcon returns the location description.
Afaik it is passed through into
- storcon_cli output
- storcon UI in console admin UI
These outputs will no longer contain `$fieldname: null` values,
which de-bloats the output (good).
But in storcon UI, it also serves as an editor "default", which
will be eliminated after a storcon with this PR is released.
## Data Format Compatibility
Backwards compat: new software reading old serialized data will
deserialize to the same runtime value because all the field types
are exactly the same and `skip_serializing_if` does not affect
deserialization.
Forward compat: old software reading data serialized by new software
will map absence fields in the serialized form to runtime value
`Option::None`. This is serde default behavior, see this playground
to convince yourself:
https://play.rust-lang.org/?version=stable&mode=debug&edition=2024&gist=f7f4e1a169959a3085b6158c022a05eb
The `serde(with="humantime_serde")` however behaves strangely:
if used on an `Option<Duration>`, it still requires the field to be
present,
unlike the serde default behavior shown in the previous paragraph.
The workaround is to set `serde(default)`.
Previously it was set on each individual field, but, we do have the
container attribute, so, set it there.
This requires deriving a `Default` impl, which, because all fields are
`Option`,
is non-magic.
See my notes here:
https://gist.github.com/problame/eddbc225a5d12617e9f2c6413e0cf799
# Future Work
We should have separate types (& crates) for
- runtime types configuration (e.g. PageServerConf::tenant_config,
AttachedLocationConf)
- `config-v1` file pageserver local disk file format
- `mgmt API`
- `pageserver.toml`
Right now they all use the same, which is convenient but makes it hard
to reason about compatibility breakage.
# Refs
- corresponding docs.neon.build PR
https://github.com/neondatabase/docs/pull/470
## Problem
#11061 changed how artifacts for releases are built, by
reusing/retagging the artifacts from release PRs. This resulted in the
BUILD_TAG that's baked into the images to not be as expected.
Context: https://neondb.slack.com/archives/C08JBTT3R1Q/p1742333300129069
## Summary of changes
Set BUILD_TAG to the release tag of the upcoming release when running
inside release PRs.
In
-
https://github.com/neondatabase/neon/pull/10993#issuecomment-2690428336
I added infinite retries for buffered writer flush IOs, primarily to
gracefully handle ENOSPC but more generally so that the buffered writer
is not left in a state where reads from the surrounding InMemoryLayer
cause panics.
However, I didn't add cancellation sensitivity, which is concerning
because then there is no way to detach a timeline/tenant that is
encountering the write IO errors.
That’s a legitimate scenario in the case of some edge case bug.
See the #10993 description for details.
This PR
- first makes flush loop infallible, enabled by infinite retries
- then adds sensitivity to `Timeline::cancel` to the flush loop, thereby
making it fallible in one specific way again
- finally fixes the InMemoryLayer/EphemeralFile/BufferedWriter
amalgamate to remain read-available after flush loop is cancelled.
The support for read-availability after cancellation is necessary so
that reads from the InMemoryLayer that are already queued up behind the
RwLock that wraps the BufferedWriter won't panic because of the
`mutable=None` that we leave behind in case the flush loop gets
cancelled.
# Alternatives
One might think that we can only ship the change for read-availability
if flush encounters an error, without the infinite retrying and/or
cancellation sensitivity complexity.
The problem with that is that read-availability sounds good but is
really quite useless, because we cannot ingest new WAL without a
writable InMemoryLayer. Thus, very soon after we transition to read-only
mode, reads from compute are going to wait anyway, but on `wait_lsn`
instead of the RwLock, because ingest isn't progressing.
Thus, having the infinite flush retries still makes more sense because
they're just "slowness" to the user, whereas wait_lsn is hard errors.
## Problem
https://github.com/neondatabase/neon/pull/11210 migrated pushing images
to ghcr. Unfortunately, it was incomplete in using images from ghcr,
which resulted in a few places referencing the ghcr build-tools image,
while trying to use docker hub credentials.
## Summary of changes
Use build-tools image from ghcr consistently.
## Problem
The pipelines after release merges are slower than they need to be at
the moment. This is because some kinds of tests/checks run on all kinds
of pipelines, even though they only matter in some of those.
## Summary of changes
Run `check-codestyle-{rust,python,jsonnet}`, `build-and-test-locally`
and `trigger-e2e-tests` only on regular PRs, not release PR or pushes to
main or release branches.
Both crates seem well maintained. x509-cert is part of the high quality
RustCrypto project that we already make heavy use of, and I think it
makes sense to reduce the dependencies where possible.
## Problem
Docker Hub has new rate limits coming up, and to avoid problems coming
with those we're switching to GHCR.
## Summary of changes
- Push images to GHCR initially and distribute them from there
- Use images from GHCR in docker-compose
There is no functional change here. We move safekeeper related code from
`service.rs` to `service/safekeeper_service.rs`, so that safekeeper
related stuff is contained in a single file. This also helps with
preventing `service.rs` from growing even further.
Part of #9011.
## Problem
The test is flaky because of the same reasons as described in
https://github.com/neondatabase/neon/issues/11177.
The test has already suppressed these `WARN` and `ERROR` log messages,
but the regexp didn't match all possible errors.
## Summary of changes
- Change regexp to suppress all possible allowed error log messages.
PRs #10891 and #10902 have time-bounded the safekeeper heartbeating of
the storage controller. Those timeouts were not meant to be permanent,
but temporary until we figured out the reasons for the safekeeper
heartbeating causing problems.
Now they are better understood and resolved. A comment is
[here](https://github.com/neondatabase/cloud/issues/24396#issuecomment-2679342929),
but most importantly, we've had:
* #10954 to send heartbeats concurrently (before the issue was we sent
them sequentially, so the total time time was number of nodes times time
for timeout to be hit, now the total time is the maximum of all things
we are heartbeating)
* work to actually make heartbeats work and not error, i.e. JWT rollout
for storcon, not sending heartbeats to decomissioned safekeepers,
removal of decomissioned safekeepers from the databases
Part of https://github.com/neondatabase/cloud/issues/25473
## Problem
Unlogged build is used for GIST/SPGIST/GIN/HNSW indexes.
In this mode we first change relation class to `RELPERSISTENCE_UNLOGGED`
and save them on local disk.
But we do not save unlogged relations in LFC.
It may cause fetching incorrect value from LFC if relfilenode is reused.
## Summary of changes
Save modified pages in LFC on second stage of unlogged build (when
modified pages are walloged).
There is no need to save pages in LFC at first phase because the will be
in any case overwritten with assigned LSN at second phase.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Adds a basic test that makes the storcon issue explicit creation of a
timeline on safeekepers (main storcon PR in #11058). It was adapted from
`test_explicit_timeline_creation` from #11002.
Also, do a bunch of fixes needed to get the test work (the API
definitions weren't correct), and log more stuff when we can't create a
new timeline due to no safekeepers being active.
Part of #9011
---------
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
Work on https://github.com/neondatabase/cloud/issues/23721 and
https://github.com/neondatabase/cloud/issues/23714
Depends on https://github.com/neondatabase/neon/pull/11111
- Add `/configure_telemetry` API endpoint
- Support second rsyslog configuration for Postgres logs export
- Enable logs export when compute feature is enabled and configure
Postgres to send logs to syslog
I have used `/configure_telemetry` name because in the future I see it
also being used for configuring a `pg_tracing` extension to export
traces. Let me know if you'd rather have these APIs separate. In this
case we can rename it to `/configure_rsyslog`.
## Problem
https://github.com/neondatabase/neon/actions/runs/13894288475/job/38871819190
shows the "Add fast-fordward label to PR to trigger fast-forward merge"
job being skipped. This is due to not using the right variable for
checking which branch the merge queue is merging into.
## Summary of changes
Use the `branch` output of the `meta` task for checking the target
branch of a merge group.
## Problem
In unlogged index build (used fir GIST/SPGIST/GIN indexes) files is
created on disk and then removed at the end.
It contradicts to the logic of DEBUG_COMPARE_LOCAL mode.
## Summary of changes
Do not create and unlink files in unlogged build in DEBUG_COMPARE_LOCAL
mode.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
In the previous PR #11045, one edge-case wasn't covered, when an ident
contains only one `$`, we were picking `$$` as a 'wrapper'. Yet, when
this `$` is at the beginning or at the end of the ident, then we end up
with `$$$` in a row which breaks the escaping.
## Summary of changes
Start from `x` tag instead of a blank string.
Slack:
https://neondb.slack.com/archives/C08HV951W2W/p1742076675079769?thread_ts=1742004205.461159&cid=C08HV951W2W
## Problem
Serial/numeric IDs lead to collisions, which is not critical but looks
awkward.
Previous discussion:
https://neondb.slack.com/archives/C033A2WE6BZ/p1741891345869979
## Summary of changes
Suggest using the `YYYY-MM-DD` prefix, which i) has less chance of
collision; ii) provides out-of-the-box lexicographic sorting; iii) even
if it collides, it's not a big deal -- just two RFCs have been started
on the same day.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
... to better match the workload characteristics of real Neon customers
## Problem
We analyzed workloads of large Neon users and want to extend the oltp
workload to include characteristics seen in those workloads.
## Summary of changes
- for re-use branch delete inserted rows from last run
- adjust expected run-time (time-outs) in GitHub workflow
- add queries that exposes the prefetch getpages path
- add I/U/D transactions for another table (so far the workload was
insert/append-only)
- add an explicit vacuum analyze step and measure its time
- add reindex concurrently step and measure its time (and take care that
this step succeeds even if prior reindex runs have failed or were
canceled)
- create a second connection string for the pooled connection that
removes the `-pooler` suffix from the hostname because we want to run
long-running statements (database maintenance) and bypass the pooler
which doesn't support unlimited statement timeout
## Test run
https://github.com/neondatabase/neon/actions/runs/13851772887/job/38760172415
## Problem
There is a rare race between controller graceful deployment and shard
splitting where we may incorrectly both abort _and_ complete the split
(on different pods), and thereby leave no shards at all in the database.
Related: #11254
## Summary of changes
- In complete_shard_split, refuse to delete anything if child shards are
not found
## Problem
Python's `jsonnet` 0.20.0 doesn't support Python 3.13, so we have a
couple of tests xfailed because of that.
## Summary of changes
- Bump `jsonnet` to `0.21.0rc2` which supports Python 3.13
- Unxfail `test_sql_exporter_metrics_e2e` and
`test_sql_exporter_metrics_smoke` on Python 3.13
- add pgaudt_gc thread to compute_ctl
to cleanup old pgaudit logs if they exist.
pgaudit can rotate files, but it doesn't delete the old files
- Add AUDIT_LOG_DIR_SIZE metric to compute_ctl
to track the size of the audit log directory in bytes.
- Fix permissions for rsyslog state files directory
## Problem
We exposed the direction tag in #10925 but didn't actually include the
ingress tag in the export to allow for an adaption period.
## Summary of changes
We now export the ingress direction
# Refs
- fixes https://github.com/neondatabase/neon/issues/11228
# Problem High-Level
When storcon validates whether a `ScheduleOptimizationAction` should be
applied, it retrieves the `tenant_secondary_status` to determine whether
a secondary is ready for the optimization.
When collecting results, it associates secondary statuses with the wrong
optimization actions in the batch of optimizations that we're
validating.
The result is that we make the decision for shard/location X based on
the SecondaryStatus of a random secondary location Y in the current
batch of optimizations.
A possible symptom is an early cutover, as seen in this engineering
investigation here:
- https://github.com/neondatabase/cloud/issues/25734
# Problem Code-Level
This code here in `optimize_all_validate`
97e2e27f68/storage_controller/src/service.rs (L7012-L7029)
zips the `want_secondary_status` with the Vec returned from
`tenant_for_shards_api` .
However, the Vec returned from `want_secondary_status` is not ordered
(it uses FuturesUnordered internally).
# Solution
Sort the Vec in input order before returning it.
`optimize_all_validate` was the only caller affected by this problem
While at it, also future-proof similar-looking function
`tenant_for_shards`.
None of its callers care about the order, but this type of function
signature is easy to use incorrectly.
# Future Work
Avoid the additional iteration, map, and allocation.
Change API to leverage AsyncFn (async closure).
And/or invert `tenant_for_shards_api` into a Future ext trait / iterator
adaptor thing.
Adds API definitions for the safekeeper API endpoints `exclude_timeline`
and `term_bump`. Also does a bugfix to return the correct type from
`delete_timeline`.
Part of #8614
## Problem
This is already disabled in production, as it is replaced by L0 flush
delays. It will be removed in a later PR, once the config option is no
longer specified in production.
## Summary of changes
Disable `l0_flush_wait_upload` by default.
## Problem
`test_metadata_image_creation ` became flaky with #11212, since image
compaction may yield to L0 compaction.
## Summary of changes
Set `NoYield` when compacting in tenant tests.
## Problem
We noticed that error metrics didn't show for some services with light
load. This is not great and can cause problems for dashboards/alerts
## Summary of changes
Pre-initialise some metricvecs.
We want to switch away from and deprecate the `--compute-hook-url` param
for the storcon in favour of `--control-plane-url` because it allows us
to construct urls with `notify-safekeepers`.
This PR switches the pytests and neon_local from a
`control_plane_compute_hook_api` to a new param named
`control_plane_hooks_api` which is supposed to point to the parent of
the `notify-attach` URL.
We still support reading the old url from disk to not be too disruptive
with existing deployments, but we just ignore it.
Also add docs for the `notify-safekeepers` upcall API.
Follow-up of #11173
Part of https://github.com/neondatabase/neon/issues/11163
## Problem
`l0_flush_delay_threshold` has already been set to 30 in production for
a couple of weeks. Let's harmonize the default.
## Summary of changes
Update `DEFAULT_L0_FLUSH_DELAY_FACTOR` to 3 such that the default
`l0_flush_delay_threshold` is `3 * compaction_threshold`.
This differs from the production setting, which is hardcoded to 30 (with
`compaction_threshold` at 10), and is more appropriate for any tenants
that have custom `compaction_threshold` overrides.
## Problem
ef0d4a48a adjusted how we build container images and how we push them,
and the neon-test-extensions image was overlooked. Additionally, is was
also missed in 1f0dea9a1, which pushed our container images to GHCR.
## Summary of changes
Push neon-test-extensions to GHCR and also push release tags for it.
## Problem
DEBUG_COMPARE_LOCAL is not supported in neon_zeroextend added in PG16
## Summary of changes
Add support of DEBUG_COMPARE_LOCAL in neon_zeroextend
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
# Problem
We leave too few observability breadcrumbs in the case where wait_lsn is
exceptionally slow.
# Changes
- refactor: extract the monitoring logic out of `log_slow` into
`monitor_slow_future`
- add global + per-timeline counter for time spent waiting for wait_lsn
- It is updated while we're still waiting, similar to what we do for
page_service response flush.
- add per-timeline counterpair for started & finished wait_lsn count
- add slow-logging to leave breadcrumbs in logs, not just metrics
For the slow-logging, we need to consider not flooding the logs during a
broker or network outage/blip.
The solution is a "log-streak-level" concurrency limit per timeline.
At any given time, there is at most one slow wait_lsn that is logging
the "still running" and "completed" sequence of logs.
Other concurrent slow wait_lsn's don't log at all.
This leaves at least one breadcrumb in each timeline's logs if some
wait_lsn was exceptionally slow during a given period.
The full degree of slowness can then be determined by looking at the
per-timeline metric.
# Performance
Reran the `bench_log_slow` benchmark, no difference, so, existing call
sites are fine.
We do use a Semaphore, but only try_acquire it _after_ things have
already been determined to be slow. So, no baseline overhead
anticipated.
# Refs
-
https://github.com/neondatabase/cloud/issues/23486#issuecomment-2711587222
Closes: https://github.com/neondatabase/cloud/issues/22998
If control-plane reports that TLS should be used, load the certificates
(and watch for updates), make sure postgres use them, and detects
updates.
Procedure:
1. Load certificates
2. Reconfigure postgres/pgbouncer
3. Loop on a timer until certificates have loaded
4. Go to 1
Notes:
1. We only run this procedure if requested on startup by control plane.
2. We needed to compile pgbouncer with openssl enabled
3. Postgres doesn't allow tls keys to be globally accessible - must be
read only to the postgres user. I couldn't convince the autoscaling team
to let me put this logic into the VM settings, so instead compute_ctl
will copy the keys to be read-only by postgres.
4. To mitigate a race condition, we also verify that the key matches the
cert.
## Problem
There was a panic on staging that compaction didn't find any keys. This
is possible if all layers selected for compaction does not contain any
keys within the current shard.
## Summary of changes
Make panic an error. In the future, we can try creating an empty image
layer so that GC can clean up those layers. Otherwise, for now, we can
only rely on shard ancestor compaction to remove these data.
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
`compaction_l0_first` has already been enabled in production for a
couple of weeks.
## Summary of changes
Enable `compaction_l0_first` by default.
Also set `CompactFlags::NoYield` in `timeline_checkpoint_handler`, to
ensure explicitly requested compaction runs to completion. This endpoint
is mainly used in tests, and caused some flakiness where tests expected
compaction to complete.
## Problem
#11061 introduced code fetching previous releases. #11151 introduced jq
error handling, which has also been applied in #11061, but parenthesis
have been missed.
## Summary of changes
Add parenthesis around error handling code.
## Problem
Autosplits always request `DEFAULT_STRIPE_SIZE` for splits. However,
splits do not allow changing the stripe size of already-sharded tenants,
and will error out if it differs.
In #11168, we are changing the stripe size, which could hit this when
attempting to autosplit already sharded tenants.
Touches #11168.
## Summary of changes
Pass `new_stripe_size: None` when autosplitting already sharded tenants.
Otherwise, pass `DEFAULT_STRIPE_SIZE` instead of the shard identity's
stripe size, since we want to use the current default rather than an
old, persisted default.
2025-03-13 13:28:10 +00:00
1242 changed files with 104516 additions and 32725 deletions
description:"Tag for the release if this is an RC PR run"
value:${{ jobs.tags.outputs.release-tag }}
previous-storage-release:
description:"Tag of the last storage release"
value:${{ jobs.tags.outputs.storage }}
@@ -24,6 +30,9 @@ on:
release-pr-run-id:
description:"Only available if `run-kind in [storage-release, proxy-release, compute-release]`. Contains the run ID of the `Build and Test` workflow, assuming one with the current commit can be found."
value:${{ jobs.tags.outputs.release-pr-run-id }}
sha:
description:"github.event.pull_request.head.sha on release PRs, github.sha otherwise"
RELEASE_PR_RUN_ID=$(gh api "/repos/${GITHUB_REPOSITORY}/actions/runs?head_sha=$CURRENT_SHA" | jq '[.workflow_runs[] | select(.name == "Build and Test") | select(.head_branch | test("^rc/release(-(proxy)|(compute))?/[0-9]{4}-[0-9]{2}-[0-9]{2}$"; "s"))] | first | .id // "Faied to find Build and Test run from RC PR!" | halt_error(1)')
RELEASE_PR_RUN_ID=$(gh api "/repos/${GITHUB_REPOSITORY}/actions/runs?head_sha=$CURRENT_SHA" | jq '[.workflow_runs[] | select(.name == "Build and Test") | select(.head_branch | test("^rc/release.*$"; "s"))] | first | .id // ("Failed to find Build and Test run from RC PR!" | halt_error(1))')
echo "release-pr-run-id=$RELEASE_PR_RUN_ID" | tee -a $GITHUB_OUTPUT
--body "Not trying to forward pull-request, because \`mergeable_state\` is \`${{ github.event.pull_request.mergeable_state }}\`, not \`clean\`."
--body "Not trying to forward pull-request, because \`mergeable_state\` is \`${{ github.event.pull_request.mergeable_state }}\`, not \`clean\` or \`unstable\`."
name:Periodic pagebench performance test on dedicated EC2 machine in eu-central-1 region
name:Periodic pagebench performance test on unit-perf-aws-arm runners
on:
schedule:
@@ -8,7 +8,7 @@ on:
# │ │ ┌───────────── day of the month (1 - 31)
# │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
# │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
- cron:'0 */3 * * *'# Runs every 3 hours
- cron:'0 */4 * * *'# Runs every 4 hours
workflow_dispatch:# Allows manual triggering of the workflow
inputs:
commit_hash:
@@ -16,6 +16,11 @@ on:
description:'The long neon repo commit hash for the system under test (pageserver) to be tested.'
required:false
default:''
recreate_snapshots:
type:boolean
description:'Recreate snapshots - !!!WARNING!!! We should only recreate snapshots if the previous ones are no longer compatible. Otherwise benchmarking results are not comparable across runs.'
storage_broker={version="0.1",path="./storage_broker/"}# Note: main broker code is inside the binary crate, so linking with the library shouldn't be heavy.
Neon is a serverless open-source alternative to AWS Aurora Postgres. It separates storage and compute and substitutes the PostgreSQL storage layer by redistributing data across a cluster of nodes.
Neon is an open-source serverless Postgres database platform. It separates storage and compute and substitutes the PostgreSQL storage layer by redistributing data across a cluster of nodes.
## Quick start
Try the [Neon Free Tier](https://neon.tech/github) to create a serverless Postgres instance. Then connect to it with your preferred Postgres client (psql, dbeaver, etc) or use the online [SQL Editor](https://neon.tech/docs/get-started-with-neon/query-with-neon-sql-editor/). See [Connect from any application](https://neon.tech/docs/connect/connect-from-any-app/) for connection instructions.
Try the [Neon Free Tier](https://neon.com/signup) to create a serverless Postgres instance. Then connect to it with your preferred Postgres client (psql, dbeaver, etc) or use the online [SQL Editor](https://neon.com/docs/get-started-with-neon/query-with-neon-sql-editor/). See [Connect from any application](https://neon.com/docs/connect/connect-from-any-app/) for connection instructions.
Alternatively, compile and run the project [locally](#running-local-installation).
@@ -270,7 +270,7 @@ By default, this runs both debug and release modes, and all supported postgres v
testing locally, it is convenient to run just one set of permutations, like this:
@@ -301,8 +301,8 @@ See also README files in some source directories, and `rustdoc` style documentat
Other resources:
- [SELECT 'Hello, World'](https://neon.tech/blog/hello-world/): Blog post by Nikita Shamgunov on the high level architecture
- [Architecture decisions in Neon](https://neon.tech/blog/architecture-decisions-in-neon/): Blog post by Heikki Linnakangas
- [SELECT 'Hello, World'](https://neon.com/blog/hello-world/): Blog post by Nikita Shamgunov on the high level architecture
- [Architecture decisions in Neon](https://neon.com/blog/architecture-decisions-in-neon/): Blog post by Heikki Linnakangas
- [Neon: Serverless PostgreSQL!](https://www.youtube.com/watch?v=rES0yzeERns): Presentation on storage system by Heikki Linnakangas in the CMU Database Group seminar series
# 'gdb' is included so that we get backtraces of core dumps produced in
# regression tests
RUNset -e \
&& apt update \
&& apt install -y \
&& apt-get update \
&& apt-get install -y --no-install-recommends \
autoconf \
automake \
bison \
@@ -155,7 +154,7 @@ RUN set -e \
# Keep the version the same as in compute/compute-node.Dockerfile and
# test_runner/regress/test_compute_metrics.py.
ENVSQL_EXPORTER_VERSION=0.17.0
ENVSQL_EXPORTER_VERSION=0.17.3
RUN curl -fsSL \
"https://github.com/burningalchemist/sql_exporter/releases/download/${SQL_EXPORTER_VERSION}/sql_exporter-${SQL_EXPORTER_VERSION}.linux-$(case"$(uname -m)" in x86_64) echo amd64;; aarch64) echo arm64;; esac).tar.gz"\
--output sql_exporter.tar.gz \
@@ -165,6 +164,7 @@ RUN curl -fsSL \
&& rm sql_exporter.tar.gz
# protobuf-compiler (protoc)
# Keep the version the same as in compute/compute-node.Dockerfile
ENVPROTOC_VERSION=25.1
RUN curl -fsSL "https://github.com/protocolbuffers/protobuf/releases/download/v${PROTOC_VERSION}/protoc-${PROTOC_VERSION}-linux-$(uname -m | sed 's/aarch64/aarch_64/g').zip" -o "protoc.zip"\
&& unzip -q protoc.zip -d protoc \
@@ -173,25 +173,31 @@ RUN curl -fsSL "https://github.com/protocolbuffers/protobuf/releases/download/v$
&& rm -rf protoc.zip protoc
# s5cmd
ENVS5CMD_VERSION=2.2.2
ENVS5CMD_VERSION=2.3.0
RUN curl -sL "https://github.com/peak/s5cmd/releases/download/v${S5CMD_VERSION}/s5cmd_${S5CMD_VERSION}_Linux-$(uname -m | sed 's/x86_64/64bit/g'| sed 's/aarch64/arm64/g').tar.gz"| tar zxvf - s5cmd \
&& chmod +x s5cmd \
&& mv s5cmd /usr/local/bin/s5cmd
# LLVM
ENVLLVM_VERSION=19
ENVLLVM_VERSION=20
RUN curl -fsSL 'https://apt.llvm.org/llvm-snapshot.gpg.key'| apt-key add - \
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
