## Problem
If the user reset password, cache could receive this information only
after `ttl` minutes.
## Summary of changes
Invalidate password on auth failure.
- No need to include c.h, port.h or pg_config.h, they are included in
postgres.h
- No need to include postgres.h in header files. Instead, the
assumption in PostgreSQL is that all .c files include postgres.h.
- Reorder includes to alphabetical order, and system headers before
pgsql headers
- Remove bunch of other unnecessary includes that got copy-pasted from
one source file to another
## Problem
Existing dependencies didn't work on Fedora 39 (python 3.12)
## Summary of changes
- Update pyyaml 6.0 -> 6.0.1
- Update yarl 1.8.2->1.9.4
- Update the `dnf install` line in README to include dependencies of
python packages (unrelated to upgrades, just noticed absences while
doing fresh pysync run)
## Problem
Currently if we are getting many consecutive connections to the same
user/ep we will send a lot of traffic to the console.
## Summary of changes
Cache with ttl=4min proxy_get_role_secret response.
Note: this is the temporary hack, notifier listener is WIP.
## Problem
The `src/proxy.rs` file is far too large
## Summary of changes
Creates 3 new files:
```
src/metrics.rs
src/proxy/retry.rs
src/proxy/connect_compute.rs
```
## Problem
#6112 added some logs and metrics: clean these up a bit:
- Avoid counting startup completions for tenants launched after startup
- exclude no-op cases from timing histograms
- remove a rogue log messages
Walproposer sometimes intentionally PANICs when its term is defeated as the
basebackup is likely spoiled by that time. We don't want core dumped in this
case.
It turns out the issue with skipped jobs is not so trivial (because
Github checks jobs transitively), a possible workaround with `if:
always() && contains(fromJSON('["success", "skipped"]'),
needs.build-buildtools-image.result)` will tangle the workflow really
bad. We'll need to come up with a better solution.
To unblock the main I'm going to revert
https://github.com/neondatabase/neon/pull/6082.
## Currently our build docker file is located in the build repo it makes
sense to have it as a part of our neon repo
## Summary of changes
We had the docker file that we use to build our binary and other tools
resided in the build repo
It made sense to bring the docker file to its repo where it has been
used
So that the contributors can also view it and amend if required
It will reduce the maintenance. Docker file changes and code changes can
be accommodated in same PR
Also, building the image and pushing it to ECR is abstracted in a
reusable workflow. Ideal is to use that for any other jobs too
## Checklist before requesting a review
- [x] Moved the docker file used to build the binary from the build repo
to the neon repo
- [x] adding gh workflow to build and push the image
- [x] adding gh workflow to tag the pushed image
- [x] update readMe file
---------
Co-authored-by: Abhijeet Patil <abhijeet@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
https://github.com/neondatabase/neon/security/dependabot/48
```
$ cargo tree -i zerocopy
zerocopy v0.7.3
└── ahash v0.8.5
└── hashbrown v0.13.2
```
ahash doesn't use the affected APIs we we are not vulnerable but best to
update to silence the alert anyway
## Summary of changes
```
$ cargo update -p zerocopy --precise 0.7.31
Updating crates.io index
Updating syn v2.0.28 -> v2.0.32
Updating zerocopy v0.7.3 -> v0.7.31
Updating zerocopy-derive v0.7.3 -> v0.7.31
```
## Problem
During startup, a client request might have to wait a long time while
the system is busy initializing all the attached tenants, even though
most of the attached tenants probably don't have any client requests to
service, and could wait a bit.
## Summary of changes
- Add a semaphore to limit how many Tenant::spawn()s may concurrently do
I/O to attach their tenant (i.e. read indices from remote storage, scan
local layer files, etc).
- Add Tenant::activate_now, a hook for kicking a tenant in its spawn()
method to skip waiting for the warmup semaphore
- For tenants that attached via warmup semaphore units, wait for logical
size calculation to complete before dropping the warmup units
- Set Tenant::activate_now in `get_active_tenant_with_timeout` (the page
service's path for getting a reference to a tenant).
- Wait for tenant activation in HTTP handlers for timeline creation and
deletion: like page service requests, these require an active tenant and
should prioritize activation if called.
## Problem
Various places in remote storage were not subject to a timeout (thereby
stuck TCP connections could hold things up), and did not respect a
cancellation token (so things like timeline deletion or tenant detach
would have to wait arbitrarily long).
## Summary of changes
- Add download_cancellable and upload_cancellable helpers, and use them
in all the places we wait for remote storage operations (with the
exception of initdb downloads, where it would not have been safe).
- Add a cancellation token arg to `download_retry`.
- Use cancellation token args in various places that were missing one
per #5066Closes: #5066
Why is this only "basic" handling?
- Doesn't express difference between shutdown and errors in return
types, to avoid refactoring all the places that use an anyhow::Error
(these should all eventually return a more structured error type)
- Implements timeouts on top of remote storage, rather than within it:
this means that operations hitting their timeout will lose their
semaphore permit and thereby go to the back of the queue for their
retry.
- Doing a nicer job is tracked in
https://github.com/neondatabase/neon/issues/6096
Part of getpage@lsn benchmark epic:
https://github.com/neondatabase/neon/issues/5771
This PR moves the control plane's spread-all-over-the-place client for
the pageserver management API into a separate module within the
pageserver crate.
I need that client to be async in my benchmarking work, so, this PR
switches to the async version of `reqwest`.
That is also the right direction generally IMO.
The switch to async in turn mandated converting most of the
`control_plane/` code to async.
Note that some of the client methods should be taking `TenantShardId`
instead of `TenantId`, but, none of the callers seem to be
sharding-aware.
Leaving that for another time:
https://github.com/neondatabase/neon/issues/6154
This doesn't make the scrubber smart enough to understand that many
shards are part of the same tenants, but it makes it understand paths
well enough to scrub the individual shards without thinking they're
malformed.
This is a prerequisite to being able to run tests with sharding enabled.
Related: #5929
## Summary of changes
saw some low-hanging codecov improvements. even if code coverage is
somewhat of a pointless game, might as well add tests where we can and
delete code if it's unused
* initdb uploads had no cancellation token, which means that when we
were stuck in upload retries, we wouldn't be able to delete the
timeline. in general, the combination of retrying forever and not having
cancellation tokens is quite dangerous.
* initdb uploads wouldn't rewind the file. this wasn't discovered in the
purposefully unreliable test-s3 in pytest because those fail on the
first byte always, not somewhere during the connection. we'd be getting
errors from the AWS sdk that the file was at an unexpected end.
slack thread: https://neondb.slack.com/archives/C033RQ5SPDH/p1702632247784079
Compaction was holding back timeline deletion because the compaction
lock had been acquired, but the semaphore was waited on. Timeline
deletion was waiting on the same lock for 1500s.
This replaces the
`pageserver::tenant::tasks::concurrent_background_tasks_rate_limit`
(which looks correct) with a simpler `..._permit` which is just an
infallible acquire, which is easier to spot "aah this needs to be raced
with cancellation tokens".
Ref: https://neondb.slack.com/archives/C03F5SM1N02/p1702496912904719
Ref: https://neondb.slack.com/archives/C03F5SM1N02/p1702578093497779
Before any json parsing from the http api only returned errors were per
field errors. Now they are done using `serde_path_to_error`, which at
least helped greatly with the `disk_usage_eviction_run` used for
testing. I don't think this can conflict with anything added in #5310.
## Problem
Historically, the pageserver used an "uninit mark" file on disk for two
purposes:
- Track which timeline dirs are incomplete for handling on restart
- Avoid trying to create the same timeline twice at the same time.
The original purpose of handling restarts is now defunct, as we use
remote storage as the source of truth and clean up any trash timeline
dirs on startup. Using the file to mutually exclude creation operations
is error prone compared with just doing it in memory, and the existing
checks happened some way into the creation operation, and could expose
errors as 500s (anyhow::Errors) rather than something clean.
## Summary of changes
- Creations are now mutually excluded in memory (using
`Tenant::timelines_creating`), rather than relying on a file on disk for
coordination.
- Acquiring unique access to the timeline ID now happens earlier in the
request.
- Creating the same timeline which already exists is now a 201: this
simplifies retry handling for clients.
- 409 is still returned if a timeline with the same ID is still being
created: if this happens it is probably because the client timed out an
earlier request and has retried.
- Colliding timeline creation requests should no longer return 500
errors
This paves the way to entirely removing uninit markers in a subsequent
change.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
The websockets gauge for active db connections seems to be growing more
than the gauge for client connections over websockets, which does not
make sense.
## Summary of changes
refactor how our counter-pair gauges are represented. not sure if this
will improve the problem, but it should be harder to mess-up the
counters. The API is much nicer though now and doesn't require
scopeguard::defer hacks
Dependency (commits inline):
https://github.com/neondatabase/neon/pull/5842
## Problem
Secondary mode tenants need a manifest of what to download. Ultimately
this will be some kind of heat-scored set of layers, but as a robust
first step we will simply use the set of resident layers: secondary
tenant locations will aim to match the on-disk content of the attached
location.
## Summary of changes
- Add heatmap types representing the remote structure
- Add hooks to Tenant/Timeline for generating these heatmaps
- Create a new `HeatmapUploader` type that is external to `Tenant`, and
responsible for walking the list of attached tenants and scheduling
heatmap uploads.
Notes to reviewers:
- Putting the logic for uploads (and later, secondary mode downloads)
outside of `Tenant` is an opinionated choice, motivated by:
- Enable future smarter scheduling of operations, e.g. uploading the
stalest tenant first, rather than having all tenants compete for a fair
semaphore on a first-come-first-served basis. Similarly for downloads,
we may wish to schedule the tenants with the hottest un-downloaded
layers first.
- Enable accessing upload-related state without synchronization (it
belongs to HeatmapUploader, rather than being some Mutex<>'d part of
Tenant)
- Avoid further expanding the scope of Tenant/Timeline types, which are
already among the largest in the codebase
- You might reasonably wonder how much of the uploader code could be a
generic job manager thing. Probably some of it: but let's defer pulling
that out until we have at least two users (perhaps secondary downloads
will be the second one) to highlight which bits are really generic.
Compromises:
- Later, instead of using digests of heatmaps to decide whether anything
changed, I would prefer to avoid walking the layers in tenants that
don't have changes: tracking that will be a bit invasive, as it needs
input from both remote_timeline_client and Layer.
## Problem
Single rate bucket is limited in usefulness
## Summary of changes
Introduce a secondary bucket allowing an average of 200 requests per
second over 1 minute, and a tertiary bucket allowing an average of 100
requests per second over 10 minutes.
Configured by using a format like
```sh
proxy --endpoint-rps-limit 300@1s --endpoint-rps-limit 100@10s --endpoint-rps-limit 50@1m
```
If the bucket limits are inconsistent, an error is returned on startup
```
$ proxy --endpoint-rps-limit 300@1s --endpoint-rps-limit 10@10s
Error: invalid endpoint RPS limits. 10@10s allows fewer requests per bucket than 300@1s (100 vs 300)
```
This is needed to allow use of batch queries from browsers.
## Problem
SQL-over-HTTP batch queries fail from web browsers because the relevant
headers, `Neon-Batch-isolation-Level` and `Neon-Batch-Read-Only`, are
not included in the server's OPTIONS response. I think we simply forgot
to add them when implementing the batch query feature.
## Summary of changes
Added `Neon-Batch-Isolation-Level` and `Neon-Batch-Read-Only` to the
OPTIONS response.
Changes I wanted to make on #6106 but decided to leave out to keep that
commit clean for including in the #6090. Finally remove
`PageReconstructionError::NeedsDownload`.
## Problem
Test deletes tenant and recreates with the same ID. The recreation bumps
generation number. This could lead to stale generation warnings in the
logs.
## Summary of changes
Handle this more gracefully by re-creating in the same generation that
the tenant was previously attached in.
We could also update the tenant delete path to have the attachment
service to drop tenant state on delete, but I like having it there: it
makes debug easier, and the only time it's a problem is when a test is
re-using a tenant ID after deletion.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
1. Using chrono for durations only is wasteful
2. The arc/mutex was not being utilised
3. Locking every shard in the dashmap every GC could cause latency
spikes
4. More buckets
## Summary of changes
1. Use `Instant` instead of `NaiveTime`.
2. Remove the `Arc<Mutex<_>>` wrapper, utilising that dashmap entry
returns mut access
3. Clear only a random shard, update gc interval accordingly
4. Multiple buckets can be checked before allowing access
When I benchmarked the check function, it took on average 811ns when
multithreaded over the course of 10 million checks.
Repeated calls to `.append` don't line up as nicely as they might get
formatted in different ways. Also, it is more characters and the lines
might be longer.
Saw this while working on #5912.
- The code for calculating the prefix in the bucket was expecting a
trailing slash (as it is in the tests), but that's an awkward
expectation to impose for use in the field: make the code more flexible
by only trimming a trailing character if it is indeed a slash.
- initdb archives were detected by the scrubber as malformed layer
files. Teach it to recognize and ignore them.
## Problem
We need a reliable way to restore a project state (in this context, I
mean data on pageservers, safekeepers, and remote storage) from a
snapshot. The existing method (that we use in `test_compatibility`)
heavily relies on config files, which makes it harder to add/change
fields in the config.
The proposed solution uses config file only to get `default_tenant_id`
and `branch_name_mappings`.
## Summary of changes
- Add `NeonEnvBuilder#from_repo_dir` method, which allows using the
`neon_env_builder` fixture with data from a snapshot.
- Use `NeonEnvBuilder#from_repo_dir` in compatibility tests
Requires for https://github.com/neondatabase/neon/issues/6033
## Problem
See
https://github.com/neondatabase/company_projects/issues/111https://neondb.slack.com/archives/C03H1K0PGKH/p1700166126954079
## Summary of changes
Do not search for AUX_FILES_KEY in parent timelines
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
## Problem
PG16 is writing null images during relation extension.
And page server implements optimisation which replace WAL record with
FPI with page image.
So instead of WAL record ~30 bytes we store 8kb null page image.
Ans this image is almost useless, because most likely it will be shortly
rewritten with actual page content.
## Summary of changes
Do not materialize wal records with null page FPI.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
In snowflake logs currently there is no information about the protocol,
that the client uses.
## Summary of changes
Propagate the information about the protocol together with the app_name.
In format: `{app_name}/{sql_over_http/tcp/ws}`.
This will give to @stepashka more observability on what our clients are
using.
## Problem
TenantId is changing to TenantShardId in many APIs. The swagger had
`format: hex` attributes on some of these IDs. That isn't formally
defined anywhere, but a reasonable person might think it means "hex
digits only", which will no longer be the case once we start using
shard-aware IDs (they're like `<tenant_id>-0001`).
## Summary of changes
- Remove these `format` attributes from all `tenant_id` fields in the
swagger definition
## Problem
- `shutdown_tasks` would log when a particular task was taking a long
time to shut down, but not when it eventually completed. That left one
uncertain as to whether the slow task was the source of a hang, or just
a precursor.
## Summary of changes
- Add a log line after a slow task shutdown
- Add an equivalent in Gate's `warn_if_stuck`, in case we ever need it.
This isn't related to the original issue but was noticed when checking
through these logging paths.
Error indicating request cancellation OR timeline shutdown was deemed as
a reason to exit the background worker that calculated synthetic size.
Fix it to only be considered for avoiding logging such of such errors.
These tests have been loitering on a branch of mine for a while: they
already provide value even without all the secondary mode bits landed
yet, and the Workload helper is handy for other tests too.
- `Workload` is a re-usable test workload that replaces some of the
arbitrary "write a few rows" SQL that I've found my self repeating, and
adds a systematic way to append data and check that reads properly
reflect the changes. This append+validate stuff is important when doing
migrations, as we want to detect situations where we might be reading
from a pageserver that has not properly seen latest changes.
- test_multi_attach is a validation of how the pageserver handles
attaching the same tenant to multiple pageservers, from a safety point
of view. This is intentionally separate from the larger testing of
migration, to provide an isolated environment for multi-attachment.
- test_location_conf_churn is a pseudo-random walk through the various
states that TenantSlot can be put into, with validation that attached
tenants remain externally readable when they should, and as a side
effect validating that the compute endpoint's online configuration
changes work as expected.
- test_live_migration is the reference implementation of how to drive a
pair of pageservers through a zero-downtime migration of a tenant.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
In https://github.com/neondatabase/neon/pull/5957, the most essential
types were updated to use TenantShardId rather than TenantId. That
unblocked other work, but didn't fully enable running multiple shards
from the same tenant on the same pageserver.
## Summary of changes
- Use TenantShardId in page cache key for materialized pages
- Update mgr.rs get_tenant() and list_tenants() functions to use a shard
id, and update all callers.
- Eliminate the exactly_one_or_none helper in mgr.rs and all code that
used it
- Convert timeline HTTP routes to use tenant_shard_id
Note on page cache:
```
struct MaterializedPageHashKey {
/// Why is this TenantShardId rather than TenantId?
///
/// Usually, the materialized value of a page@lsn is identical on any shard in the same tenant. However, this
/// this not the case for certain internally-generated pages (e.g. relation sizes). In future, we may make this
/// key smaller by omitting the shard, if we ensure that reads to such pages always skip the cache, or are
/// special-cased in some other way.
tenant_shard_id: TenantShardId,
timeline_id: TimelineId,
key: Key,
}
```
## Problem
A bunch of refactorings extracted from
https://github.com/neondatabase/neon/pull/6087 (not required for it);
the most significant one is using toml instead of formatted strings.
## Summary of changes
- Use toml instead of formatted strings for config
- Skip pageserver log check if `pageserver.log` doesn't exist
- `chmod -x test_runner/regress/test_config.py`
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
test_creating_tenant_conf_after...
- Test detaches a tenant and then re-attaches immediatel: this causes a
race between pending remote LSN update and the generation bump in the
attachment.
test_gc_cutoff:
- Test rapidly restarts a pageserver before one generation has had the
chance to process deletions from the previous generation
## Problem
The cancellation code was confusing and error prone (as seen before in
our memory leaks).
## Summary of changes
* Use the new `TaskTracker` primitve instead of JoinSet to gracefully
wait for tasks to shutdown.
* Updated libs/utils/completion to use `TaskTracker`
* Remove `tokio::select` in favour of `futures::future::select` in a
specialised `run_until_cancelled()` helper function
These changes help with identifying thrashing.
The existing `pageserver_page_cache_find_victim_iters_total` is already
useful, but, it doesn't tell us how many individual find_victim() calls
are happening, only how many clock-LRU steps happened in the entire
system,
without info about whether we needed to actually evict other data vs
just scan for a long time, e.g., because the cache is large.
The changes in this PR allows us to
1. count each possible outcome separately, esp evictions
2. compute mean iterations/outcome
I don't think anyone except me was paying close attention to
`pageserver_page_cache_find_victim_iters_total` before, so,
I think the slight behavior change of also counting iterations
for the 'iters exceeded' case is fine.
refs https://github.com/neondatabase/cloud/issues/8351
refs https://github.com/neondatabase/neon/issues/5479
## Problem
This was wasting resources: if we run a test with mock s3 we don't then
need to run it again with local fs. When we're running in CI, we don't
need to run with the mock/local storage as well as real S3. There is
some value in having CI notice/spot issues that might otherwise only
happen when running locally, but that doesn't justify the cost of
running the tests so many more times on every PR.
## Summary of changes
- For tests that used available_remote_storages or
available_s3_storages, update them to either specify no remote storage
(therefore inherit the default, which is currently local fs), or to
specify s3_storage() for the tests that actually want an S3 API.
## Problem
Currently, if one creates many shards they will all ingest all the data:
not much use! We want them to ingest a proportional share of the data
each.
Closes: #6025
## Summary of changes
- WalIngest object gets a copy of the ShardIdentity for the Tenant it
was created by.
- While iterating the `blocks` part of a decoded record, blocks that do
not match the current shard are ignored, apart from on shard zero where
they are used to update relation sizes in `observe_decoded_block` (but
not stored).
- Before committing a `DataDirModificiation` from a WAL record, we check
if it's empty, and drop the record if so. This check is necessary
(rather than just looking at the `blocks` part) because certain record
types may modify blocks in non-obvious ways (e.g.
`ingest_heapam_record`).
- Add WAL ingest metrics to record the total received, total committed,
and total filtered out
- Behaviour for unsharded tenants is unchanged: they will continue to
ingest all blocks, and will take the fast path through `is_key_local`
that doesn't bother calculating any hashes.
After this change, shards store a subset of the tenant's total data, and
accurate relation sizes are only maintained on shard zero.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Currently using 8kB buffers, raise that to 32kB to hopefully 1/4 of
`spawn_blocking` usage. Also a drive-by fixing of last `tokio::io::copy`
to `tokio::io::copy_buf`.
There is double buffering in remote_storage and in pageserver for 8KiB
in using `tokio::io::copy` to read `BufReader<ReaderStream<_>>`.
Switches downloads and uploads to use `Stream<Item =
std::io::Result<Bytes>>`. Caller and only caller now handles setting up
buffering. For reading, `Stream<Item = ...>` is also a `AsyncBufRead`,
so when writing to a file, we now have `tokio::io::copy_buf` reading
full buffers and writing them to `tokio::io::BufWriter` which handles
the buffering before dispatching over to `tokio::fs::File`.
Additionally implements streaming uploads for azure. With azure
downloads are a bit nicer than before, but not much; instead of one huge
vec they just hold on to N allocations we got over the wire.
This PR will also make it trivial to switch reading and writing to
io-uring based methods.
Cc: #5563.
## Problem
Since #5449 we enable generations in tests by default. Running
benchmarks was missed while merging that PR, and there was one that
needed updating.
## Summary of changes
Make test_bulk_insert use the proper generation-aware helper for tenant
creation.
## Problem
Some existing tests are written in a way that's incompatible with tenant
generations.
## Summary of changes
Update all the tests that need updating: this is things like calling
through the NeonPageserver.tenant_attach helper to get a generation
number, instead of calling directly into the pageserver API. There are
various more subtle cases.
## Problem
For channel binding failed messages we were still saying "channel
binding not supported" in the errors.
## Summary of changes
Fix error messages
Per [feedback], split the Layer metrics, also finally account for lost
and [re-submitted feedback] on `layer_gc` by renaming it to
`layer_delete`, `Layer::garbage_collect_on_drop` renamed to
`Layer::delete_on_drop`. References to "gc" dropped from metric names
and elsewhere.
Also fixes how the cancellations were tracked: there was one rare
counter. Now there is a top level metric for cancelled inits, and the
rare "download failed but failed to communicate" counter is kept.
Fixes: #6027
[feedback]: https://github.com/neondatabase/neon/pull/5809#pullrequestreview-1720043251
[re-submitted feedback]: https://github.com/neondatabase/neon/pull/5108#discussion_r1401867311
The gc_timeline() function is async, but it calls the synchronous wait()
function. In the worst case, that could lead to a deadlock by using up
all tokio executor threads.
In the passing, fix a few typos in comments.
Fixes issue #6045.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
to_string forces allocating a less than pointer sized string (costing on
stack 4 usize), using a Display formattable slug saves that. the
difference seems small, but at the same time, we log these a lot.
```
could not start the compute node: compute is in state "failed": db error: ERROR: could not access file "$libdir/timescaledb-2.10.1": No such file or directory Caused by: ERROR: could not access file "$libdir/timescaledb-2.10.1": No such file or directory
```
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1700560921471619
## Summary of changes
Update relation size cache for FSM fork in WAL records filter
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
- The `Attaching tenant` log message omitted some useful information
like the generation and mode
- info-level messages about writing configuration files were
unnecessarily verbose
- During process shutdown, we don't emit logs about the various phases:
this is very cheap to log since we do it once per process lifetime, and
is helpful when figuring out where something got stuck during a hang.
## Problem
Traditionally we would detach/attach directly with curl if we wanted to
"reboot" a single tenant. That's kind of inconvenient these days,
because one needs to know a generation number to issue an attach
request.
Closes: https://github.com/neondatabase/neon/issues/6011
## Summary of changes
- Introduce a new `/reset` API, which remembers the LocationConf from
the current attachment so that callers do not have to work out the
correct configuration/generation to use.
- As an additional support tool, allow an optional `drop_cache` query
parameter, for situations where we are concerned that some on-disk state
might be bad and want to clear that as well as the in-memory state.
One might wonder why I didn't call this "reattach" -- it's because
there's already a PS->CP API of that name and it could get confusing.
In case of configuring the empty compute, API handler is waiting on
condvar for compute state change. Yet, previously if Postgres failed to
start we were just setting compute status to `Failed` without notifying.
It causes a timeout on control plane side, although we can return a
proper error from compute earlier.
With this commit API handler should be properly notified.
## Problem
When a pageserver receives a page service request identified by
TenantId, it must decide which `Tenant` object to route it to.
As in earlier PRs, this stuff is all a no-op for tenants with a single
shard: calls to `is_key_local` always return true without doing any
hashing on a single-shard ShardIdentity.
Closes: https://github.com/neondatabase/neon/issues/6026
## Summary of changes
- Carry immutable `ShardIdentity` objects in Tenant and Timeline. These
provide the information that Tenants/Timelines need to figure out which
shard is responsible for which Key.
- Augment `get_active_tenant_with_timeout` to take a `ShardSelector`
specifying how the shard should be resolved for this tenant. This mode
depends on the kind of request (e.g. basebackups always go to shard
zero).
- In `handle_get_page_at_lsn_request`, handle the case where the
Timeline we looked up at connection time is not the correct shard for
the page being requested. This can happen whenever one node holds
multiple shards for the same tenant. This is currently written as a
"slow path" with the optimistic expectation that usually we'll run with
one shard per pageserver, and the Timeline resolved at connection time
will be the one serving page requests. There is scope for optimization
here later, to avoid doing the full shard lookup for each page.
- Omit consumption metrics from nonzero shards: only the 0th shard is
responsible for tracing accurate relation sizes.
Note to reviewers:
- Testing of these changes is happening separately on the
`jcsp/sharding-pt1` branch, where we have hacked neon_local etc needed
to run a test_pg_regress.
- The main caveat to this implementation is that page service
connections still look up one Timeline when the connection is opened,
before they know which pages are going to be read. If there is one shard
per pageserver then this will always also be the Timeline that serves
page requests. However, if multiple shards are on one pageserver then
get page requests will incur the cost of looking up the correct Timeline
on each getpage request. We may look to improve this in future with a
"sticky" timeline per connection handler so that subsequent requests for
the same Timeline don't have to look up again, and/or by having postgres
pass a shard hint when connecting. This is tracked in the "Loose ends"
section of https://github.com/neondatabase/neon/issues/5507
## Problem
Panic when less than 8 bytes is presented in a startup packet.
## Summary of changes
We need there to be a 4 byte message code, so the expected min length is
8.
## Problem
It looks like because of reallocation of the buckets in previous PR, the
metric is broken in graphana.
## Summary of changes
Renamed the metric.
## Problem
In the past we've rolled out all new `compute_ctl` functionality right
to all users, which could be risky. I want to have a more fine-grained
control over what we enable, in which env and to which users.
## Summary of changes
Add an option to pass a list of feature flags to `compute_ctl`. If not
passed, it defaults to an empty list. Any unknown flags are ignored.
This allows us to release new experimental features safer, as we can
then flip the flag for one specific user, only Neon employees, free /
pro / etc. users and so on. Or control it per environment.
In the current implementation feature flags are passed via compute spec,
so they do not allow controlling behavior of `empty` computes. For them,
we can either stick with the previous approach, i.e. add separate cli
args or introduce a more generic `--features` cli argument.
Problem
-------
Before this PR, there was no concurrency limit on initial logical size
computations.
While logical size computations are lazy in theory, in practice
(production), they happen in a short timeframe after restart.
This means that on a PS with 20k tenants, we'd have up to 20k concurrent
initial logical size calculation requests.
This is self-inflicted needless overload.
This hasn't been a problem so far because the `.await` points on the
logical size calculation path never return `Pending`, hence we have a
natural concurrency limit of the number of executor threads.
But, as soon as we return `Pending` somewhere in the logical size
calculation path, other concurrent tasks get scheduled by tokio.
If these other tasks are also logical size calculations, they eventually
pound on the same bottleneck.
For example, in #5479, we want to switch the VirtualFile descriptor
cache to a `tokio::sync::RwLock`, which makes us return `Pending`, and
without measures like this patch, after PS restart, VirtualFile
descriptor cache thrashes heavily for 2 hours until all the logical size
calculations have been computed and the degree of concurrency /
concurrent VirtualFile operations is down to regular levels.
See the *Experiment* section below for details.
<!-- Experiments (see below) show that plain #5479 causes heavy
thrashing of the VirtualFile descriptor cache.
The high degree of concurrency is too much for
In the case of #5479 the VirtualFile descriptor cache size starts
thrashing heavily.
-->
Background
----------
Before this PR, initial logical size calculation was spawned lazily on
first call to `Timeline::get_current_logical_size()`.
In practice (prod), the lazy calculation is triggered by
`WalReceiverConnectionHandler` if the timeline is active according to
storage broker, or by the first iteration of consumption metrics worker
after restart (`MetricsCollection`).
The spawns by walreceiver are high-priority because logical size is
needed by Safekeepers (via walreceiver `PageserverFeedback`) to enforce
the project logical size limit.
The spawns by metrics collection are not on the user-critical path and
hence low-priority. [^consumption_metrics_slo]
[^consumption_metrics_slo]: We can't delay metrics collection
indefintely because there are TBD internal SLOs tied to metrics
collection happening in a timeline manner
(https://github.com/neondatabase/cloud/issues/7408). But let's ignore
that in this issue.
The ratio of walreceiver-initiated spawns vs
consumption-metrics-initiated spawns can be reconstructed from logs
(`spawning logical size computation from context of task kind {:?}"`).
PR #5995 and #6018 adds metrics for this.
First investigation of the ratio lead to the discovery that walreceiver
spawns 75% of init logical size computations.
That's because of two bugs:
- In Safekeepers: https://github.com/neondatabase/neon/issues/5993
- In interaction between Pageservers and Safekeepers:
https://github.com/neondatabase/neon/issues/5962
The safekeeper bug is likely primarily responsible but we don't have the
data yet. The metrics will hopefully provide some insights.
When assessing production-readiness of this PR, please assume that
neither of these bugs are fixed yet.
Changes In This PR
------------------
With this PR, initial logical size calculation is reworked as follows:
First, all initial logical size calculation task_mgr tasks are started
early, as part of timeline activation, and run a retry loop with long
back-off until success. This removes the lazy computation; it was
needless complexity because in practice, we compute all logical sizes
anyways, because consumption metrics collects it.
Second, within the initial logical size calculation task, each attempt
queues behind the background loop concurrency limiter semaphore. This
fixes the performance issue that we pointed out in the "Problem" section
earlier.
Third, there is a twist to queuing behind the background loop
concurrency limiter semaphore. Logical size is needed by Safekeepers
(via walreceiver `PageserverFeedback`) to enforce the project logical
size limit. However, we currently do open walreceiver connections even
before we have an exact logical size. That's bad, and I'll build on top
of this PR to fix that
(https://github.com/neondatabase/neon/issues/5963). But, for the
purposes of this PR, we don't want to introduce a regression, i.e., we
don't want to provide an exact value later than before this PR. The
solution is to introduce a priority-boosting mechanism
(`GetLogicalSizePriority`), allowing callers of
`Timeline::get_current_logical_size` to specify how urgently they need
an exact value. The effect of specifying high urgency is that the
initial logical size calculation task for the timeline will skip the
concurrency limiting semaphore. This should yield effectively the same
behavior as we had before this PR with lazy spawning.
Last, the priority-boosting mechanism obsoletes the `init_order`'s grace
period for initial logical size calculations. It's a separate commit to
reduce the churn during review. We can drop that commit if people think
it's too much churn, and commit it later once we know this PR here
worked as intended.
Experiment With #5479
---------------------
I validated this PR combined with #5479 to assess whether we're making
forward progress towards asyncification.
The setup is an `i3en.3xlarge` instance with 20k tenants, each with one
timeline that has 9 layers.
All tenants are inactive, i.e., not known to SKs nor storage broker.
This means all initial logical size calculations are spawned by
consumption metrics `MetricsCollection` task kind.
The consumption metrics worker starts requesting logical sizes at low
priority immediately after restart. This is achieved by deleting the
consumption metrics cache file on disk before starting
PS.[^consumption_metrics_cache_file]
[^consumption_metrics_cache_file] Consumption metrics worker persists
its interval across restarts to achieve persistent reporting intervals
across PS restarts; delete the state file on disk to get predictable
(and I believe worst-case in terms of concurrency during PS restart)
behavior.
Before this patch, all of these timelines would all do their initial
logical size calculation in parallel, leading to extreme thrashing in
page cache and virtual file cache.
With this patch, the virtual file cache thrashing is reduced
significantly (from 80k `open`-system-calls/second to ~500
`open`-system-calls/second during loading).
### Critique
The obvious critique with above experiment is that there's no skipping
of the semaphore, i.e., the priority-boosting aspect of this PR is not
exercised.
If even just 1% of our 20k tenants in the setup were active in
SK/storage_broker, then 200 logical size calculations would skip the
limiting semaphore immediately after restart and run concurrently.
Further critique: given the two bugs wrt timeline inactive vs active
state that were mentioned in the Background section, we could have 75%
of our 20k tenants being (falsely) active on restart.
So... (next section)
This Doesn't Make Us Ready For Async VirtualFile
------------------------------------------------
This PR is a step towards asynchronous `VirtualFile`, aka, #5479 or even
#4744.
But it doesn't yet enable us to ship #5479.
The reason is that this PR doesn't limit the amount of high-priority
logical size computations.
If there are many high-priority logical size calculations requested,
we'll fall over like we did if #5479 is applied without this PR.
And currently, at very least due to the bugs mentioned in the Background
section, we run thousands of high-priority logical size calculations on
PS startup in prod.
So, at a minimum, we need to fix these bugs.
Then we can ship #5479 and #4744, and things will likely be fine under
normal operation.
But in high-traffic situations, overload problems will still be more
likely to happen, e.g., VirtualFile cache descriptor thrashing.
The solution candidates for that are orthogonal to this PR though:
* global concurrency limiting
* per-tenant rate limiting => #5899
* load shedding
* scaling bottleneck resources (fd cache size (neondatabase/cloud#8351),
page cache size(neondatabase/cloud#8351), spread load across more PSes,
etc)
Conclusion
----------
Even with the remarks from in the previous section, we should merge this
PR because:
1. it's an improvement over the status quo (esp. if the aforementioned
bugs wrt timeline active / inactive are fixed)
2. it prepares the way for
https://github.com/neondatabase/neon/pull/6010
3. it gets us close to shipping #5479 and #4744
# Problem
I need walredo to be cancellation-safe for
https://github.com/neondatabase/neon/pull/6000#discussion_r1412049728
# Solution
We are only `async fn` because of
`wait_for(stderr_logger_task_done).await`, added in #5560 .
The `stderr_logger_cancel` and `stderr_logger_task_done` were there out
of precaution that the stderr logger task might for some reason not stop
when the walredo process terminates.
That hasn't been a problem in practice.
So, simplify things:
- remove `stderr_logger_cancel` and the
`wait_for(...stderr_logger_task_done...)`
- use `tokio::process::ChildStderr` in the stderr logger task
- add metrics to track number of running stderr logger tasks so in case
I'm wrong here, we can use these metrics to identify the issue (not
planning to put them into a dashboard or anything)
## Problem
Limit the number of open connections between the control plane and
proxy.
## Summary of changes
Enable dynamic rate limiter in prod.
Unfortunately the latency metrics are a bit broken, but from logs I see
that on staging for the past 7 days only 2 times latency for acquiring
was greater than 1ms (for most of the cases it's insignificant).
If there are too many L0 layers before compaction, the compaction
process becomes slow because of slow `Timeline::get`. As a result of the
slowdown, the pageserver will generate even more L0 layers for the next
iteration, further exacerbating the slow performance.
Change to perform L0 -> L1 compaction before creating new images. The
simple change speeds up compaction time and `Timeline::get` to 5x.
`Timeline::get` is faster on top of L1 layers.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
`test_pg_clients` reads the actual result from a *.stdout file,
https://github.com/neondatabase/neon/pull/5977 has added a header to
such files, so `test_pg_clients` started to fail.
## Summary of changes
- Use `capture_stdout` and compare the expected result with the output
instead of *.stdout file content
## Problem
On pageservers upgraded to enable generations, these INFO level logs
were rather frequent. If a tenant timeline hasn't written new layers
since the upgrade, it will emit the "No index_part.json*" log every time
it starts.
## Summary of changes
- Downgrade two log lines from info to debug
- Add a tiny unit test that I wrote for sanity-checking that there
wasn't something wrong with our Generation-comparing logic when loading
index parts.
Temporarily reset neon.max_cluster_size to avoid
the possibility of hitting the limit, while we are applying config:
creating new extensions, roles, etc...
Only introduced a few hours ago (#5995), I took a look at the numbers
from staging and realized that `get_current_logical_size()` is on the
walingest hot path: we call it for every `ReplicationMessage::XLogData`
that we receive.
Since the metric is global, it would be quite a busy cache line.
This PR replaces it with a new metric purpose-built for what's most
interesting right now.
It was using `PRECONDITION_FAILED` for errors during `ComputeSpec` to
`ParsedSpec` conversion, but this disobeys the OpenAPI spec [1] and
correct code should be `BAD_REQUEST` for any spec processing errors.
While on it, I also noticed that `compute_ctl` OpenAPI spec has an
invalid format and fixed it.
[1] fd81945a60/compute_tools/src/http/openapi_spec.yaml (L119-L120)
## Problem
While investigating https://github.com/neondatabase/neon/issues/5854, we
hypothesised that logs/repo-dir from the initial failure might leak into
reruns. Use different directories for each run to avoid such a
possibility.
## Summary of changes
- make each test rerun use different directories
- update `pytest-rerunfailure` plugin from 11.1.2 to 13.0
I would love to not expose the in-accurate value int he mgmt API at all,
and in fact control plane doesn't use it [^1].
But our tests do, and I have no desire to change them at this time.
[^1]: https://github.com/neondatabase/cloud/pull/8317
... by panicking on overflow;
It was made fallible initially due to in-confidence in logical size
calculation. However, the error has never happened since I am at Neon.
Let's stop worrying about this by converting the overflow check into a panic.
If `index_part.json` is (verifiably) not present on remote storage, we
should regard the timeline as inexistent. This lets `clean_up_timelines`
purge the partial local disk state, which is important in the case of
incomplete creations leaving behind state that hinders retries. For
incomplete deletions, we also want the timeline's local disk content be
gone completely.
The PR removes the allowed warnings added by #5390 and #5912, as we now
are only supposed to issue info level messages. It also adds a
reproducer for #6007, by parametrizing the
`test_timeline_init_break_before_checkpoint_recreate` test added by
#5390. If one reverts the .rs changes, the "cannot create its uninit
mark file" log line occurs once one comments out the failing checks for
the local disk state being actually empty.
Closes#6007
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
This PR adds an `existing_initdb_timeline_id` option to timeline
creation APIs, taking an optional timeline ID.
Follow-up of #5390.
If the `existing_initdb_timeline_id` option is specified via the HTTP
API, the pageserver downloads the existing initdb archive from the given
timeline ID and extracts it, instead of running initdb itself.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
no problem
## Summary of changes
replaces boxstr with arcstr as it's cheaper to clone. mild perf
improvement.
probably should look into other smallstring optimsations tbh, they will
likely be even better. The longest endpoint name I was able to construct
is something like `ep-weathered-wildflower-12345678` which is 32 bytes.
Most string optimisations top out at 23 bytes
aiming for faster to understand a bunch of `.stdout` and `.stderr`
files, see example echo_1.stdout differences:
```
+# echo foobar abbacd
+
foobar abbacd
```
it can be disabled and is disabled in this PR for some tests; use
`pg_bin.run_capture(..., with_command_header=False)` for that.
as a bonus this cleans up the echoed newlines from s3_scrubber
output which are also saved to file but echoed to test log.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
we have test cases which launch processes from threads, and they capture
output assuming this counter is thread-safe. at least according to my
understanding this operation in python requires a lock to be
thread-safe.
- During migration of tenants, it is useful for callers to
`/location_conf` to flush a tenant's layers while transitioning to
AttachedStale: this optimization reduces the redundant WAL replay work
that the tenant's new attached pageserver will have to do. Test coverage
for this will come as part of the larger tests for live migration in
#5745#5842
- Flushing is controlled with `flush_ms` query parameter: it is the
caller's job to decide how long they want to wait for a flush to
complete. If flush is not complete within the time limit, the pageserver
proceeds to succeed anyway: flushing is only an optimization.
- Add swagger definitions for all this: the location_config API is the
primary interface for driving tenant migration as described in
docs/rfcs/028-pageserver-migration.md, and will eventually replace the
various /attach /detach /load /ignore APIs.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Test failure seen here:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-5860/7032903218/index.html#suites/837740b64a53e769572c4ed7b7a7eeeb/c0f1c79a70a3b9ab
```
E AssertionError: assert not [(302, '2023-11-29T13:23:51.046801Z ERROR request{method=PUT path=/v1/tenant/f6b845de60cb0e92f4426e0d6af1d2ea/timeline/69a8c98004abe71a281cff8642a45274/checkpoint request_id=eca33d8a-7af2-46e7-92ab-c28629feb42c}: Error processing HTTP request: InternalServerError(queue is in state Stopped\n')]
```
This appears to be a legitimate log: the test is issuing checkpoint
requests in the background, and deleting (therefore shutting down) a
timeline.
## Problem
fixes#5654 - WakeComputeErrors occuring during a connect_to_compute got
propagated as IO errors, which get forwarded to the user as "Couldn't
connect to compute node" with no helpful message.
## Summary of changes
Handle WakeComputeError during ConnectionError properly
Enable the pageserver to recover from data corruption events by
implementing a feature to re-apply historic WAL records in parallel to the already
occurring WAL replay.
The feature is outside of the user-visible backup and history story, and
only
serves as a second-level backup for the case that there is a bug in the
pageservers that corrupted the served pages.
The RFC proposes the addition of two new features:
* recover a broken branch from WAL (downtime is allowed)
* a test recovery system to recover random branches to make sure
recovery works
## Problem
Per-project IP allowlist:
https://github.com/neondatabase/cloud/issues/8116
## Summary of changes
Implemented IP filtering on the proxy side.
To retrieve ip allowlist for all scenarios, added `get_auth_info` call
to the control plane for:
* sql-over-http
* password_hack
* cleartext_hack
Added cache with ttl for sql-over-http path
This might slow down a bit, consider using redis in the future.
---------
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
Remove handcrafted TenantConf deserialization code. Use
`serde_path_to_error` to include the field which failed parsing. Leaves
the duplicated TenantConf in pageserver and models, does not touch
PageserverConf handcrafted deserialization.
Error change:
- before change: "configure option `checkpoint_distance` cannot be
negative"
- after change: "`checkpoint_distance`: invalid value: integer `-1`,
expected u64"
Fixes: #5300
Cc: #3682
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Co-authored-by: Shany Pozin <shany@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
#5123
## Summary of changes
Add `--sql-over-http-pool-opt-in true` default cli arg. Allows us to set
`--sql-over-http-pool-opt-in false` region-by-region
`neon_local endpoint` subcommand currently allows creating two primary
endpoints for the same branch which leads to shutdown of both endpoints
`neon_local endpoint start` new behavior:
1. Fail if endpoint doesn't exist
2. Fail if two primary conflict detected
Fixes#4959Closes#5426
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
(includes two preparatory commits from
https://github.com/neondatabase/neon/pull/5960)
## Problem
To accommodate multiple shards in the same tenant on the same
pageserver, we must include the full TenantShardId in local paths. That
means that all code touching local storage needs to see the
TenantShardId.
## Summary of changes
- Replace `tenant_id: TenantId` with `tenant_shard_id: TenantShardId` on
Tenant, Timeline and RemoteTimelineClient.
- Use TenantShardId in helpers for building local paths.
- Update all the relevant call sites.
This doesn't update absolutely everything: things like PageCache,
TaskMgr, WalRedo are still shard-naive. The purpose of this PR is to
update the core types so that others code can be added/updated
incrementally without churning the most central shared types.
Precursor for https://github.com/neondatabase/neon/pull/5957
## Problem
When DeletionList was written, TenantId/TimelineId didn't have
human-friendly modes in their serde. #5335 added those, such that the
helpers used in serialization of HashMaps are no longer necessary.
## Summary of changes
- Add a unit test to ensure that this change isn't changing anything
about the serialized form
- Remove the serialization helpers for maps of Id
## Problem
PG16 (https://github.com/neondatabase/postgres/pull/327) adds new
function to SMGR: zeroextend
It's implementation in Neon actually wal-log zero pages of extended
relation.
This zero page is wal-logged using XLOG_FPI.
As far as page is zero, the hole optimization (excluding from the image
everything between pg_upper and pd_lower) doesn't work.
## Summary of changes
In case of zero page (`PageIsNull()` returns true) assume
`hole_size=BLCKSZ`
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
This is a narrow race that can leave a stuck Stopping tenant behind,
while emitting a log error "Missing InProgress marker during tenant
upsert, this is a bug"
- Deletion request 1 puts tenant into Stopping state, and fires off
background part of DeleteTenantFlow
- Deletion request 2 acquires a SlotGuard for the same tenant ID, leaves
a TenantSlot::InProgress in place while it checks if the tenant's state
is accept able.
- DeleteTenantFlow finishes, calls TenantsMap::remove, which removes the
InProgress marker.
- Deletion request 2 calls SlotGuard::revert, which upserts the old
value (the Tenant in Stopping state), and emits the telltale log
message.
Closes: #5936
## Summary of changes
- Add a regression test which uses pausable failpoints to reproduce this
scenario.
- TenantsMap::remove is only called by DeleteTenantFlow. Its behavior is
tweaked to express the different possible states, especially
`InProgress` which carriers a barrier.
- In DeleteTenantFlow, if we see such a barrier result from remove(),
wait for the barrier and then try removing again.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
pgbouncer 1.21.0 doesn't play nicely with DEALLOCATD/DISCARD ALL if
prepared statement support is enabled (max_prepared_statements > 0).
There's a patch[0] that improves this (it will be included in the next
release of pgbouncer).
This PR applies this patch on top of 1.21.0 release tarball.
For some reason, the tarball doesn't include `test/test_prepared.py`
(which is modified by the patch as well), so the patch can't be applied
clearly. I use `filterdiff` (from `patchutils` package) to apply
the required changes.
[0] a7b3c0a5f4
Quest: https://github.com/neondatabase/neon/issues/4745. Follow-up to
#4938.
- add in locks for compaction and gc, so we don't have multiple
executions at the same time in tests
- remove layer_removal_cs
- remove waiting for uploads in eviction/gc/compaction
- #4938 will keep the file resident until upload completes
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
The TenantShardId in API URLs is sufficient to uniquely identify a
tenant shard, but not for it to function: it also needs to know its full
sharding configuration (stripe size, layout version) in order to map
keys to shards.
## Summary of changes
- Introduce ShardIdentity: this is the superset of ShardIndex (#5924 )
that is required for translating keys to shard numbers.
- Include ShardIdentity as an optional attribute of LocationConf
- Extend the public `LocationConfig` API structure with a flat
representation of shard attributes.
The net result is that at the point we construct a `Tenant`, we have a
`ShardIdentity` (inside LocationConf). This enables the next steps to
actually use the ShardIdentity to split WAL and validate that page
service requires are reaching the correct shard.
## Problem
For sharded tenants, the layer keys must include the shard number and
shard count, to disambiguate keys written by different shards in the
same tenant (shard number), and disambiguate layers written before and
after splits (shard count).
Closes: https://github.com/neondatabase/neon/issues/5924
## Summary of changes
There are no functional changes in this PR: everything behaves the same
for the default ShardIndex::unsharded() value. Actual construct of
sharded tenants will come next.
- Add a ShardIndex type: this is just a wrapper for a ShardCount and
ShardNumber. This is a subset of ShardIdentity: whereas ShardIdentity
contains enough information to filter page keys, ShardIndex contains
just enough information to construct a remote key. ShardIndex has a
compact encoding, the same as the shard part of TenantShardId.
- Store the ShardIndex as part of IndexLayerMetadata, if it is set to a
different value than ShardIndex::unsharded.
- Update RemoteTimelineClient and DeletionQueue to construct paths using
the layer metadata. Deletion code paths that previously just passed a
`Generation` now pass a full `LayerFileMetadata` to capture the shard as
well.
Notes to reviewers:
- In deletion code paths, I could have used a (Generation, ShardIndex)
instead of the full LayerFileMetadata. I opted for the full object
partly for brevity, and partly because in future when we add checksums
the deletion code really will care about the full metadata in order to
validate that it is deleting what was intended.
- While ShardIdentity and TenantShardId could both use a ShardIndex, I
find that they read more cleanly as "flat" structs that spell out the
shard count and number field separately. Serialization code would need
writing out by hand anyway, because TenantShardId's serialized form is
not a serde struct-style serialization.
- ShardIndex doesn't _have_ to exist (we could use ShardIdentity
everywhere), but it is a worthwhile optimization, as we will have many
copies of this as part of layer metadata. In future the size difference
betweedn ShardIndex and ShardIdentity may become larger if we implement
more sophisticated key distribution mechanisms (i.e. new values of
ShardIdentity::layout).
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
We can segfault if we update connstr inside of a process that has
detached from shmem (e.g. inside stats collector)
## Summary of changes
Add a check to make sure we're not detached
## Problem
channel binding protects scram from sophisticated MITM attacks where the
attacker is able to produce 'valid' TLS certificates.
## Summary of changes
get the tls-server-end-point channel binding, and verify it is correct
for the SCRAM-SHA-256-PLUS authentication flow
instead of direct S3 request.
Pros:
- simplify code a lot (no need to provide AWS credentials and paths);
- reduce latency of downloading extension data as proxy resides near
computes; -reduce AWS costs as proxy has cache and 1000 computes asking
the same extension will not generate 1000 downloads from S3.
- we can use only one S3 bucket to store extensions (and rid of regional
buckets which were introduced to reduce latency);
Changes:
- deprecate remote-ext-config compute_ctl parameter, use
http://pg-ext-s3-gateway if any old format remote-ext-cofig is provided;
- refactor tests to use mock http server;
## Problem
Historically, we treated the presence of a timeline on local disk as
evidence that it logically exists. Since #5580 that is no longer the
case, so we can always rely on remote storage. If we restart and the
timeline is gone in remote storage, we will also purge it from local
disk: no need for a marker.
Reference on why this PR is for timeline markers and not tenant markers:
https://github.com/neondatabase/neon/issues/5080#issuecomment-1783187807
## Summary of changes
Remove code paths that read + write deletion marker for timelines.
Leave code path that deletes these markers, just in case we deploy while
there are some in existence. This can be cleaned up later.
(https://github.com/neondatabase/neon/issues/5718)
Fix the fallible vs. infallible check order with
`UninitTimeline::finish_creation` so that the incomplete timeline can be
removed. Currently the order of drop guard unwrapping causes uninit
files to be left on pageserver, blocking the tenant deletion.
Cc: #5914
Cc: #investigation-2023-11-23-stuck-tenant-deletion
this will make it easier to test if an added allowed_error does in fact
match for example against a log file from an allure report.
```
$ python3 test_runner/fixtures/pageserver/allowed_errors.py --help
usage: allowed_errors.py [-h] [-i INPUT]
check input against pageserver global allowed_errors
optional arguments:
-h, --help show this help message and exit
-i INPUT, --input INPUT
Pageserver logs file. Reads from stdin if no file is provided.
```
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
There is not check that LFC is initialised (`lfc_max_size != 0`) in
`local_cache_pages` function
## Summary of changes
Add proper check.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
The connections.join_next helped but it wasn't enough... The way I
implemented the improvement before was still faulty but it mostly worked
so it looked like it was working correctly.
From [`tokio::select`
docs](https://docs.rs/tokio/latest/tokio/macro.select.html):
> 4. Once an <async expression> returns a value, attempt to apply the
value to the provided <pattern>, if the pattern matches, evaluate
<handler> and return. If the pattern does not match, disable the current
branch and for the remainder of the current call to select!. Continue
from step 3.
The `connections.join_next()` future would complete and `Some(Err(e))`
branch would be evaluated but not match (as the future would complete
without panicking, we would hope). Since the branch doesn't match, it's
disabled. The select continues but never attempts to call `join_next`
again. Getting unlucky, more TCP connections are created than we attempt
to join_next.
## Summary of changes
Replace the `Some(Err(e))` pattern with `Some(e)`. Because of the
auto-disabling feature, we don't need the `if !connections.is_empty()`
step as the `None` pattern will disable it for us.
- Run CREATE EXTENSION neon for template1, so that it was created in all databases.
- Run ALTER EXTENSION neon in all databases, to always have the newest version of the extension in computes.
- Add test_neon_extension test
## Problem
See #2592
## Summary of changes
Compresses the results of initdb into a .tar.zst file and uploads them
to S3, to enable usage in recovery from lsn.
Generations should not be involved I think because we do this only once
at the very beginning of a timeline.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
#5900
## Summary of changes
Added cancellation token as param in all relevant code paths and actually used it in the find_lsn_for_timestamp main loop
fixes https://github.com/neondatabase/neon/issues/5878
obsoletes https://github.com/neondatabase/neon/issues/5879
Before this PR, it could happen that `load_layer_map` schedules removal
of the future
image layer. Then a later compaction run could re-create the same image
layer, scheduling a PUT.
Due to lack of an upload queue barrier, the PUT and DELETE could be
re-ordered.
The result was IndexPart referencing a non-existent object.
## Summary of changes
* Add support to `pagectl` / Python tests to decode `IndexPart`
* Rust
* new `pagectl` Subcommand
* `IndexPart::{from,to}_s3_bytes()` methods to internalize knowledge
about encoding of `IndexPart`
* Python
* new `NeonCli` subclass
* Add regression test
* Rust
* Ability to force repartitioning; required to ensure image layer
creation at last_record_lsn
* Python
* The regression test.
* Fix the issue
* Insert an `UploadOp::Barrier` after scheduling the deletions.
## Problem
## Summary of changes
See #5500
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
(part of the getpage benchmarking epic #5771)
The plan is to make the benchmarking tool log on stderr and emit results
as JSON on stdout. That way, the test suite can simply take captures
stdout and json.loads() it, while interactive users of the benchmarking
tool have a reasonable experience as well.
Existing logging users continue to print to stdout, so, this change
should be a no-op functionally and performance-wise.
This way, `cargo update -p tokio-postgres` just works. The `Cargo.toml`
communicates more clearly that we're referring to the `main` branch. And
the git revision is still pinned in `Cargo.lock`.
While reviewing code noticed a scary `layer_paths.pop().unwrap()` then
realized this should be further asyncified, something I forgot to do
when I switched the `compact_level0_phase1` back to async in #4938.
This keeps the double-fsync for new deltas as #4749 is still unsolved.
## Problem
Currently, control plane doesn't know about neon_superuser, so if a user
creates a database with owner neon_superuser it causes an exception when
it tries to forward it. It is also currently possible to ALTER ROLE
neon_superuser.
## Summary of changes
Disallow creating database with owner neon_superuser. This is probably
fine, since I don't think you can create a database with owner normal
superuser. Also forbids altering neon_superuser
This change brings down incremental compilation for me
from > 1min to 10s (and this is a pretty old Ryzen 1700X).
More details: "incremental compilation" here means to change one
character
in the `failed to read value from offset` string in `image_layer.rs`.
The command for incremental compilation is `cargo build_testing`.
The system on which I got these numbers uses `mold` via
`~/.cargo/config.toml`.
As a bonus, `rust-gdb` is now at least a little fun again.
Some tests are timing out in debug builds due to these changes.
This PR makes them skip for debug builds.
We run both with debug and release build, so, the loss of coverage is
marginal.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
A very low number of layer loads have been marked wrongly as permanent,
as I did not remember that `VirtualFile::open` or reading could fail
transiently for contention. Return separate errors for transient and
persistent errors from `{Delta,Image}LayerInner::load`.
Includes drive-by comment changes.
The implementation looks quite ugly because having the same type be both
the inner (operation error) and outer (critical error), but with the
alternatives I tried I did not find a better way.
The longer a pageserver runs, the more walredo processes it accumulates
from tenants that are touched intermittently (e.g. by availability
checks). This can lead to getting OOM killed.
Changes:
- Add an Instant recording the last use of the walredo process for a
tenant
- After compaction iteration in the background task, check for idleness
and stop the walredo process if idle for more than 10x compaction
period.
Cc: #3620
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Shany Pozin <shany@neon.tech>
First compaction/gc error backoff starts from 0 which is less than 2s
what it was before #5672. This is now fixed to be the intended 2**n.
Additionally noticed the `compaction_iteration` creating an
`anyhow::Error` via `into()` always captures a stacktrace even if we had
a stacktraceful anyhow error within the CompactionError because there is
no stable api for querying that.
Changes the error message encountered when the `neon.max_cluster_size`
limit is reached. Reasoning is that this is user-visible, and so should
*probably* use language that's closer to what users are familiar with.
## Problem
We don't know the number of users with the different kind of
authentication: ["sni", "endpoint in options" (A and B from
[here](https://neon.tech/docs/connect/connection-errors)),
"password_hack"]
## Summary of changes
Collect metrics by sni kind.
## Problem
When using TenantId as the key, we are unable to handle multiple tenant
shards attached to the same pageserver for the same tenant ID. This is
an expected scenario if we have e.g. 8 shards and 5 pageservers.
## Summary of changes
- TenantsMap is now a BTreeMap instead of a HashMap: this enables
looking up by range. In future, we will need this for page_service, as
incoming requests will just specify the Key, and we'll have to figure
out which shard to route it to.
- A new key type TenantShardId is introduced, to act as the key in
TenantsMap, and as the id type in external APIs. Its human readable
serialization is backward compatible with TenantId, and also
forward-compatible as long as sharding is not actually used (when we
construct a TenantShardId with ShardCount(0), it serializes to an
old-fashioned TenantId).
- Essential tenant APIs are updated to accept TenantShardIds:
tenant/timeline create, tenant delete, and /location_conf. These are the
APIs that will enable driving sharded tenants. Other apis like /attach
/detach /load /ignore will not work with sharding: those will soon be
deprecated and replaced with /location_conf as part of the live
migration work.
Closes: #5787
## Problem
`HEAD` commit for a PR is a phantom merge commit which skews the baseline
commit for coverage reports.
See
https://github.com/neondatabase/neon/pull/5751#issuecomment-1790717867
## Summary of changes
- Use commit hash instead of `HEAD` for finding baseline commits for
code coverage
- Use the base branch for PRs or the current branch for pushes
- trivial serialization roundtrip test for
`pageserver::repository::Value`
- add missing `start_paused = true` to 15s test making it <0s test
- completely unrelated future clippy lint avoidance (helps beta channel
users)
## Problem
Currently the only way to exercise tenant migration is via python test
code. We need a convenient way for developers to do it directly in a
neon local environment.
## Summary of changes
- Add a `--num-pageservers` argument to `cargo neon init` so that it's
easy to run with multiple pageservers
- Modify default pageserver overrides in neon_local to set up `LocalFs`
remote storage, as any migration/attach/detach stuff doesn't work in the
legacy local storage mode. This also unblocks removing the pageserver's
support for the legacy local mode.
- Add a new `cargo neon tenant migrate` command that orchestrates tenant
migration, including endpoints.
`cargo deny` was complaining the version 0.8.3 was yanked (for possible
DoS attack [wiki]), but the latest version (0.8.5) also includes aarch64
fixes which may or may not be relevant. Our usage of ahash limits to
proxy, but I don't think we are at any risk.
[wiki]: https://github.com/tkaitchuck/aHash/wiki/Yanked-versions
rationale: some crates pull these in as default; hopefully these hints
will require less cleanup-after and Cargo.lock file watching.
follow-up to #5848.
## Problem
This is a log hygiene fix, for an occasional test failure.
warn-level logging in imitate_timeline_cached_layer_accesses can't
distinguish actual errors from shutdown cases.
## Summary of changes
Replaced anyhow::Error with an explicit CollectKeySpaceError type, that
includes conversion from PageReconstructError::Cancelled.
In OOM situations, knowing exactly how many walredo processes there were
at a time would help afterwards to understand why was pageserver OOM
killed. Add `pageserver_wal_redo_process_total` metric to keep track of
total wal redo process started, shutdown and killed since pageserver
start.
Closes#5722
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <me@cschwarz.com>
## Problem
I've added `BUILD_TAG` to docker images.
(https://github.com/neondatabase/neon/pull/5812), but forgot to add it
to services that we build for tests
## Summary of changes
- Set `BUILD_TAG` in `build-neon` job
## Problem
Some developers use workstations with arm CPUs, and sometimes x86-64
code is not fully compatible with it (for example,
https://github.com/neondatabase/neon/pull/5827).
Although we don't have arm CPUs in the prod (yet?), it is worth having
some basic checks for this architecture to have a better developer
experience.
Closes https://github.com/neondatabase/neon/issues/5829
## Summary of changes
- Run `check-codestyle-rust`-like & `build-neon`-like jobs on Arm runner
- Add `run-extra-build-*` label to run all available extra builds
Includes the changes of #3689 that address point 1 of #3689, plus some
further improvements. In particular, this PR does:
* set `min_lsn` to a safe value to create branches from (and verify it
in tests)
* return `min_lsn` instead of `max_lsn` for `NoData` and `Past` (verify
it in test for `Past`, `NoData` is harder and not as important)
* return `commit_lsn` instead of `max_lsn` for Future (and verify it in
the tests)
* add some comments
Split out of #5686 to get something more minimal out to users.
Minor bugfix, something noticed while manual code-review. Use the same
joinset for inprogress tenants so we can get the benefit of the
buffering logging just as we get for attached tenants, and no single
inprogress task can hold up shutdown of other tenants.
The `get_timestamp_of_lsn` pageserver endpoint has been added in #5497,
but the yml it added was wrong: the lsn is expected in hex format, not
in integer (decimal) format.
## Problem
We have observed the shutdown of a timeline taking a long time when a
deletion arrives at a busy time for the system. This suggests that we
are not respecting cancellation tokens promptly enough.
## Summary of changes
- Refactor timeline shutdown so that rather than having a shutdown()
function that takes a flag for optionally flushing, there are two
distinct functions, one for graceful flushing shutdown, and another that
does the "normal" shutdown where we're just setting a cancellation token
and then tearing down as fast as we can. This makes things a bit easier
to reason about, and enables us to remove the hand-written variant of
shutdown that was maintained in `delete.rs`
- Layer flush task checks cancellation token more carefully
- Logical size calculation's handling of cancellation tokens is
simplified: rather than passing one in, it respects the Timeline's
cancellation token.
This PR doesn't touch RemoteTimelineClient, which will be a key thing to
fix as well, so that a slow remote storage op doesn't hold up shutdown.
replace the checkbox list with a a proper task list in the epic template
NB: this PR does not change the code, it only touches the github issue
templates
## Problem
A user can perform many database connections at the same instant of time
- these will all cache miss and materialise as requests to the control
plane. #5705
## Summary of changes
I am using a `DashMap` (a sharded `RwLock<HashMap>`) of endpoints ->
semaphores to apply a limiter. If the limiter is enabled (permits > 0),
the semaphore will be retrieved per endpoint and a permit will be
awaited before continuing to call the wake_compute endpoint.
### Important details
This dashmap would grow uncontrollably without maintenance. It's not a
cache so I don't think an LRU-based reclamation makes sense. Instead,
I've made use of the sharding functionality of DashMap to lock a single
shard and clear out unused semaphores periodically.
I ran a test in release, using 128 tokio tasks among 12 threads each
pushing 1000 entries into the map per second, clearing a shard every 2
seconds (64 second epoch with 32 shards). The endpoint names were
sampled from a gamma distribution to make sure some overlap would occur,
and each permit was held for 1ms. The histogram for time to clear each
shard settled between 256-512us without any variance in my testing.
Holding a lock for under a millisecond for 1 of the shards does not
concern me as blocking
## Problem
Currently, we aren't doing any explicit slowdown in response to 429
responses. Recently, as we hit remote storage a bit harder (pageserver
does more ListObjectsv2 requests than it used to since #5580 ), we're
seeing storms of 429 responses that may be the result of not just doing
too may requests, but continuing to do those extra requests without
backing off any more than our usual backoff::exponential.
## Summary of changes
Switch from AWS's "Standard" retry policy to "Adaptive" -- docs describe
this as experimental but it has been around for a long time. The main
difference between Standard and Adaptive is that Adaptive rate-limits
the client in response to feedback from the server, which is meant to
avoid scenarios where the client would otherwise repeatedly hit
throttling responses.
## Problem
We have a funny 3-day timeout for connections between the compute and
pageserver. We want to get rid of it, so to do that we need to make sure
the compute is resilient to connection failures.
Closes: https://github.com/neondatabase/neon/issues/5518
## Summary of changes
This test makes the pageserver randomly drop the connection if the
failpoint is enabled, and ensures we can keep querying the pageserver.
This PR also reduces the default timeout to 10 minutes from 3 days.
* lower level on auth success from info to debug (fixes#5820)
* don't log stacktraces on auth errors (as requested on slack). we do this by introducing an `AuthError` type instead of using `anyhow` and `bail`.
* return errors that have been censored for improved security.
## Problem
#5711 and #5367 raced -- the `SlotGuard` type needs `Gate` to properly
enforce its invariant that we may not drop an `Arc<Tenant>` from a slot.
## Summary of changes
Replace the TODO with the intended check of Gate.
## Problem
This test could fail if timing is unlucky, and the deletions in the test
land in two deletion lists instead of one.
## Summary of changes
We await _some_ validations instead of _all_ validations, because our
execution failpoint
will prevent validation proceeding for any but the first DeletionList.
Usually the workload
just generates one, but if it generates two due to timing, then we must
not expect that the
second one will be validated.
neondatabase/autoscaling builds libs/vm-monitor during CI because it's a
necessary component of autoscaling.
workspace_hack includes a lot of crates that are not necessary for
vm-monitor, which artificially inflates the build time on the
autoscaling side, so hopefully removing the dependency should speed
things up.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
- Close#5784
## Summary of changes
- Update the `GetActiveTenantError` -> `QueryError` conversion process
in `pageserver/src/page_service.rs`
- Update the pytest logging exceptions in
`./test_runner/regress/test_tenant_detach.py`
The idea is to pass neon_* prefixed options to control plane. It can be
used by cplane to dynamically create timelines and computes. Such
options also should be excluded from passing to compute. Another issue
is how connection caching is working now, because compute's instance now
depends not only on hostname but probably on such options too I included
them to cache key.
## Problem
For quickly rotating JWT secrets, we want to be able to reload the JWT
public key file in the pageserver, and also support multiple JWT keys.
See #4897.
## Summary of changes
* Allow directories for the `auth_validation_public_key_path` config
param instead of just files. for the safekeepers, all of their config options
also support multiple JWT keys.
* For the pageservers, make the JWT public keys easily globally swappable
by using the `arc-swap` crate.
* Add an endpoint to the pageserver, triggered by a POST to
`/v1/reload_auth_validation_keys`, that reloads the JWT public keys from
the pre-configured path (for security reasons, you cannot upload any
keys yourself).
Fixes#4897
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
When enabled, this failpoint would busy-spin in a loop that emits log
messages.
## Summary of changes
Move the failpoint inside a backoff::exponential block: it will still
spam the log, but at much lower rate.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
https://github.com/neondatabase/neon/pull/5576 added `build-tag`
reporting to `libmetrics_build_info`, but it's not reported because we
didn't set the corresponding env variable in the build process.
## Summary of changes
- Add `BUILD_TAG` env var while building services
I forked the project and in my local repo, I wasn't able to compile the
project and in my search, I found the solution in neon forum. After a PR
discussion, I made a change in the makefile to alert the missing `git
submodules update` step.
---------
Signed-off-by: Fernando Luz <prof.fernando.luz@gmail.com>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
This was preventing it getting cleanly converted to a
CalculateLogicalSizeError::Cancelled, resulting in "Logical size
calculation failed" errors in logs.
## Problem
See: https://github.com/neondatabase/neon/issues/5796
## Summary of changes
Completing the refactor is quite verbose and can be done in stages: each
interface that is currently called directly from a top-level mgr.rs
function can be moved into TenantManager once the relevant subsystems
have access to it.
Landing the initial change to create of TenantManager is useful because
it enables new code to use it without having to be altered later, and
sets us up to incrementally fix the existing code to use an explicit
Arc<TenantManager> instead of relying on the static TENANTS.
## Problem
Some comments in 'receive_wal.rs' is not suitable. It may copy from
'send_wal.rs' and leave it unchanged.
## Summary of changes
This commit fixes two comments in the code:
Changed "/// Unregister walsender." to "/// Unregister walreceiver."
Changed "///Scope guard to access slot in WalSenders registry" to
"///Scope guard to access slot in WalReceivers registry."
Load the metadata from the returned `GetBlobResponse` and avoid
downloading it via a separate request.
As it turns out, the SDK does return the metadata:
https://github.com/Azure/azure-sdk-for-rust/issues/1439 .
This PR will reduce the number of requests to Azure caused by downloads.
Fixes#5571
## Problem
Follows on from #5299
- We didn't have a generic way to protect a tenant undergoing changes:
`Tenant` had states, but for our arbitrary transitions between
secondary/attached, we need a general way to say "reserve this tenant
ID, and don't allow any other ops on it, but don't try and report it as
being in any particular state".
- The TenantsMap structure was behind an async RwLock, but it was never
correct to hold it across await points: that would block any other
changes for all tenants.
## Summary of changes
- Add the `TenantSlot::InProgress` value. This means:
- Incoming administrative operations on the tenant should retry later
- Anything trying to read the live state of the tenant (e.g. a page
service reader) should retry later or block.
- Store TenantsMap in `std::sync::RwLock`
- Provide an extended `get_active_tenant_with_timeout` for page_service
to use, which will wait on InProgress slots as well as non-active
tenants.
Closes: https://github.com/neondatabase/neon/issues/5378
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
When shutting down a Tenant, it isn't just important to cause any
background tasks to stop. It's also important to wait until they have
stopped before declaring shutdown complete, in cases where we may re-use
the tenant's local storage for something else, such as running in
secondary mode, or creating a new tenant with the same ID.
## Summary of changes
A `Gate` class is added, inspired by
[seastar::gate](https://docs.seastar.io/master/classseastar_1_1gate.html).
For types that have an important lifetime that corresponds to some
physical resource, use of a Gate as well as a CancellationToken provides
a robust pattern for async requests & shutdown:
- Requests must always acquire the gate as long as they are using the
object
- Shutdown must set the cancellation token, and then `close()` the gate
to wait for requests in progress before returning.
This is not for memory safety: it's for expressing the difference
between "Arc<Tenant> exists", and "This tenant's files on disk are
eligible to be read/written".
- Both Tenant and Timeline get a Gate & CancellationToken.
- The Timeline gate is held during eviction of layers, and during
page_service requests.
- Existing cancellation support in page_service is refined to use the
timeline-scope cancellation token instead of a process-scope
cancellation token. This replaces the use of `task_mgr::associate_with`:
tasks no longer change their tenant/timelineidentity after being
spawned.
The Tenant's Gate is not yet used, but will be important for
Tenant-scoped operations in secondary mode, where we must ensure that
our secondary-mode downloads for a tenant are gated wrt the activity of
an attached Tenant.
This is part of a broader move away from using the global-state driven
`task_mgr` shutdown tokens:
- less global state where we rely on implicit knowledge of what task a
given function is running in, and more explicit references to the
cancellation token that a particular function/type will respect, making
shutdown easier to reason about.
- eventually avoid the big global TASKS mutex.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Improve the serde impl for several types (`Lsn`, `TenantId`,
`TimelineId`) by making them sensitive to
`Serializer::is_human_readadable` (true for json, false for bincode).
Fixes#3511 by:
- Implement the custom serde for `Lsn`
- Implement the custom serde for `Id`
- Add the helper module `serde_as_u64` in `libs/utils/src/lsn.rs`
- Remove the unnecessary attr `#[serde_as(as = "DisplayFromStr")]` in
all possible structs
Additionally some safekeeper types gained serde tests.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
The scrubber didn't know how to find the latest index_part when
generations were in use.
## Summary of changes
- Teach the scrubber to do the same dance that pageserver does when
finding the latest index_part.json
- Teach the scrubber how to understand layer files with generation
suffixes.
- General improvement to testability: scan_metadata has a machine
readable output that the testing `S3Scrubber` wrapper can read.
- Existing test coverage of scrubber was false-passing because it just
didn't see any data due to prefixing of data in the bucket. Fix that.
This is incremental improvement: the more confidence we can have in the
scrubber, the more we can use it in integration tests to validate the
state of remote storage.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
See https://neondb.slack.com/archives/C04DGM6SMTM/p1698226491736459
## Summary of changes
Update WAL affected buffers when restoring WAL from safekeeper
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
Some of the log messages were lost with the #4938. This PR adds some of
them back, most notably:
- starting to on-demand download
- successful completion of on-demand download
- ability to see when there were many waiters for the layer download
- "unexpectedly on-demand downloading ..." is now `info!`
Additionally some rare events are logged as error, which should never
happen.
## Problem
Proxy doesn't accept wake_compute responses with the allowed IPs.
## Summary of changes
Extend wake_compute api to be able to return allowed_ips.
when introducing `get_and_upgrade` I forgot that an `evict_and_wait`
would had already incremented the counter for started evictions, but an
upgrade would just "silently" cancel the eviction as no drop would ever
run. these metrics are likely sources for alerts with the next release,
so it's important to keep them correct.
In an earlier PR
https://github.com/neondatabase/neon/pull/5743#discussion_r1378625244 I
added a FIXME and there's a simple solution suggested by @jcsp, so
implement it. Wondering why I did not implement this originally, there
is no concept of a permanent failure, so this failure will happen quite
often. I don't think the frequency is a problem however.
Sadly for std::fs::FileType there is only decimal and hex formatting, no
octal.
Following from discussion on
https://github.com/neondatabase/neon/pull/5436 where hacking an implicit
die-on-fatal-io behavior into an Error type was a source of disagreement
-- in this PR, dying on fatal I/O errors is explicit, with `fatal_err`
and `maybe_fatal_err` helpers in the `MaybeFatalIo` trait, which is
implemented for std::io::Result.
To enable this approach with `crashsafe_overwrite`, the return type of
that function is changed to std::io::Result -- the previous error enum
for this function was not used for any logic, and the utility of saying
exactly which step in the function failed is outweighed by the hygiene
of having an I/O funciton return an io::Result.
The initial use case for these helpers is the deletion queue.
With the layer implementation as was done in #4938, it is possible via
cancellation to cause two concurrent downloads on the same path, due to
how `RemoteTimelineClient::download_remote_layer` does tempfiles. Thread
the init semaphore through the spawned task of downloading to make this
impossible to happen.
Right before merging, I added a loop to `fn
LayerInner::get_or_maybe_download`, which was always supposed to be
there. However I had forgotten to restart initialization instead of
waiting for the eviction to happen to support original design goal of
"eviction should always lose to redownload (or init)". This was wrong.
After this fix, if `spawn_blocking` queue is blocked on something,
nothing bad will happen.
Part of #5737.
## Problem
Some requests with `Authorization` header did not properly set the
`Bearer ` prefix. Problem explained here
https://github.com/neondatabase/cloud/issues/6390.
## Summary of changes
Added `Bearer ` prefix to missing requests.
## Problem
test_stderr hangs on MacOS.
See https://neondb.slack.com/archives/C036U0GRMRB/p1698438997903919
## Summary of changes
Always handle POLLHUP to prevent infinite loop.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The `LayerInner::version` never needed to be read in more than one
place. Clarified while fixing #5737 of which this is the first step.
This decrements possible wrong atomics usage in Layer, but does not
really fix anything.
Minor changes from while I have been working on HA tests:
- Manual pytest executions came with some warnings from `log.warn()`
usage
- When something fails in a generations-enabled test, it it useful to
have a log from the attachment service of what attached when, and with
which generation.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Prepare for a new release workflow
* Release PR is created on Fridays
* The discussion/approval happens during Friday
* Sunday morning the deployment will be done in central-il and perf
tests will be run
* On Monday early IST morning gradually start rolling (starting from US
regions as they are still in weekend time)
See slack for discussion:
https://neondb.slack.com/archives/C04P81J55LK/p1698565305607839?thread_ts=1698428241.031979&cid=C04P81J55LK
## Problem
In #5658 we suppressed the first-iteration output from these logs, but
the volume of warnings is still problematic.
## Summary of changes
- Downgrade all slow task warnings to INFO. The information is still
there if we actively want to know about which tasks are running slowly,
without polluting the overall stream of warnings with situations that
are unsurprising to us.
- Revert the previous change so that we output on the first iteration as
we used to do. There is no reason to suppress these, now that the
severity is just info.
## Problem
Neon doesn't compile on nightly and had numerous clippy complaints.
## Summary of changes
1. Fixed troublesome dependency
2. Fixed or ignored the lints where appropriate
## Problem
Role need to have REPLICATION privilege to be able to used for logical
replication.
New roles are created with this option.
This PR tries to update existed roles.
## Summary of changes
Update roles in `handle_roles` method
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
- include Layer generation in the default display, with
Generation::Broken as `-broken`
- omit layer from `layer_gc` span because the api it works with needs to
support N layers, so the api needs to log each layer
## Problem
If there were stray files in the timelines/ dir after tenant deletion,
pageserver could panic on out of range.
## Summary of changes
Use iterator `take()`, which doesn't care if the number of elements
available is less than requested.
## Problem
See
https://neondb.slack.com/archives/C036U0GRMRB/p1698652221399419?thread_ts=1698438997.903919&cid=C036U0GRMRB
## Summary of changes
Check if record pointer is not NULL before trying to print record
descriptor
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
The flush task logs a backtrace if it tries to upload and remote
timeline client is already in stopped state.
Therefore we cannot shut them down concurrently: flush task must be shut
down first.
This wasn't more obvious because:
- Timeline deletions IRL usually happen when not much is being written
- In tests, there is a global allow-list for this log
It's not obvious whether removing the global log allow list is safe,
this PR was prompted by how the log spam got in my way when testing
deletion changes.
## Problem
accidental spam
## Summary of changes
don't spam control plane if control plane is down :)
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
In #5539, I moved the connect_to_compute latency to start counting
before authentication - this is because authentication will perform some
calls to the control plane in order to get credentials and to eagerly
wake a compute server. It felt important to include these times in the
latency metric as these are times we should definitely care about
reducing.
What is not interesting to record in this metric is the roundtrip time
during authentication when we wait for the client to respond.
## Summary of changes
Implement a mechanism to pause the latency timer, resuming on drop of
the pause struct. We pause the timer right before we send the
authentication message to the client, and we resume the timer right
after we complete the authentication flow.
## Problem
## Summary of changes
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] ~~If it is a core feature, I have added thorough tests.~~
- [ ] ~~Do we need to implement analytics? if so did you add the
relevant metrics to the dashboard?~~
- [ ] ~~If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.~~
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
#5649 added the concept of dangling layers which #4938 uses but only
partially. I forgot to change `schedule_compaction_update` to not
schedule deletions to uphold the "have a layer, you can read it".
With the now remembered fix, I don't think these checks should ever fail
except for a mistake I already did. These changes might be useful for
protecting future changes, even though the Layer carrying the generation
AND the `schedule_(gc|compaction)_update` require strong arcs.
Rationale for keeping the `#[cfg(feature = "testing")]` is worsening any
leak situation which might come up.
- Add a new util `project_build_tag` macro, similar to
`project_git_version`
- Update the `set_build_info_metric` to accept and make use of
`build_tag` info
- Update all codes which use the `set_build_info_metric`
This benchmark started failing after #5580 merged.
It was manually deleting some local content on a pageserver, and
expecting the behavior that the pageserver would "forget" about the
timeline on startup as a result. That is no longer our behavior:
pageservers use the remote storage as the source of truth.
Rather than having the test go manually delete things at all, we can
just delete the whole tenant via the pageserver API, and thereby start
from a clean situation.
## Problem
The previous garbage cleanup functionality relied on doing a dry run,
inspecting logs, and then doing a deletion. This isn't ideal, because
what one actually deletes might not be the same as what one saw in the
dry run. It's also risky UX to rely on presence/absence of one CLI flag
to control deletion: ideally the deletion command should be totally
separate from the one that scans the bucket.
Related: https://github.com/neondatabase/neon/issues/5037
## Summary of changes
This is a major re-work of the code, which results in a net decrease in
line count of about 600. The old code for removing garbage was build
around the idea of doing discovery and purging together: a
"delete_batch_producer" sent batches into a deleter. The new code writes
out both procedures separately, in functions that use the async streams
introduced in https://github.com/neondatabase/neon/pull/5176 to achieve
fast concurrent access to S3 while retaining the readability of a single
function.
- Add `find-garbage`, which writes out a JSON file of tenants/timelines
to purge
- Add `purge-garbage` which consumes the garbage JSON file, applies some
extra validations, and does deletions.
- The purge command will refuse to execute if the garbage file indicates
that only garbage was found: this guards against classes of bugs where
the scrubber might incorrectly deem everything garbage.
- The purge command defaults to only deleting tenants that were found in
"deleted" state in the control plane. This guards against the risk that
using the wrong console API endpoint could cause all tenants to appear
to be missing.
Outstanding work for a future PR:
- Make whatever changes are needed to adapt to the Console/Control Plane
separation.
- Make purge even safer by checking S3 `Modified` times for
index_part.json files (not doing this here, because it will depend on
the generation-aware changes for finding index_part.json files)
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Co-authored-by: Shany Pozin <shany@neon.tech>
Only applicable change was neondatabase/autoscaling#584, setting
pgbouncer auth_dbname=postgres in order to fix superuser connections
from preventing dropping databases.
## Problem
We currently require full restart of compute if we change the pageserver
url
## Summary of changes
Makes it so that we don't have to do a full restart, but can just send
SIGHUP
## Problem
The pageserver had two ways of loading a tenant:
- `spawn_load` would trust on-disk content to reflect all existing
timelines
- `spawn_attach` would list timelines in remote storage.
It was incorrect for `spawn_load` to trust local disk content, because
it doesn't know if the tenant might have been attached and written
somewhere else. To make this correct would requires some generation
number checks, but the payoff is to avoid one S3 op per tenant at
startup, so it's not worth the complexity -- it is much simpler to have
one way to load a tenant.
## Summary of changes
- `Tenant` objects are always created with `Tenant::spawn`: there is no
more distinction between "load" and "attach".
- The ability to run without remote storage (for `neon_local`) is
preserved by adding a branch inside `attach` that uses a fallback
`load_local` if no remote_storage is present.
- Fix attaching a tenant when it has a timeline with no IndexPart: this
can occur if a newly created timeline manages to upload a layer before
it has uploaded an index.
- The attach marker file that used to indicate whether a tenant should
be "loaded" or "attached" is no longer needed, and is removed.
- The GenericRemoteStorage interface gets a `list()` method that maps
more directly to what ListObjects does, returning both keys and common
prefixes. The existing `list_files` and `list_prefixes` methods are just
calls into `list()` now -- these can be removed later if we would like
to shrink the interface a bit.
- The remote deletion marker is moved into `timelines/` and detected as
part of listing timelines rather than as a separate GET request. If any
existing tenants have a marker in the old location (unlikely, only
happens if something crashes mid-delete), then they will rely on the
control plane retrying to complete their deletion.
- Revise S3 calls for timeline listing and tenant load to take a
cancellation token, and retry forever: it never makes sense to make a
Tenant broken because of a transient S3 issue.
## Breaking changes
- The remote deletion marker is moved from `deleted` to
`timelines/deleted` within the tenant prefix. Markers in the old
location will be ignored: it is the control plane's responsibility to
retry deletions until they succeed. Markers in the new location will be
tolerated by the previous release of pageserver via
https://github.com/neondatabase/neon/pull/5632
- The local `attaching` marker file is no longer written. Therefore, if
the pageserver is downgraded after running this code, the old pageserver
will not be able to distinguish between partially attached tenants and
fully attached tenants. This would only impact tenants that were partway
through attaching at the moment of downgrade. In the unlikely even t
that we do experience an incident that prompts us to roll back, then we
may check for attach operations in flight, and manually insert
`attaching` marker files as needed.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Previously, if walredo process crashed we would try to spawn a fresh one
every 2 seconds, which is expensive in itself, but also results in a
high I/O load from the part of the compaction prior to the failure,
which we re-run every 2 seconds.
Closes: https://github.com/neondatabase/neon/issues/5671
This fixes issues in pageserver's walredo process where WALRedo
logs of loglevel=LOG are interpreted as errors.
## Problem
See #5560
## Summary of changes
Set the log level to something that doesn't include LOG.
## Problem
Tenant deletions would sometimes be accompanied by compaction stack
traces, because `shutdown()` puts the tenant into stopping state before
it joins background tasks.
## Summary of changes
Treat GC+Compaction as no-ops on a Stopping tenant.
Implement a new `struct Layer` abstraction which manages downloadness
internally, requiring no LayerMap locking or rewriting to download or
evict providing a property "you have a layer, you can read it". The new
`struct Layer` provides ability to keep the file resident via a RAII
structure for new layers which still need to be uploaded. Previous
solution solved this `RemoteTimelineClient::wait_completion` which lead
to bugs like #5639. Evicting or the final local deletion after garbage
collection is done using Arc'd value `Drop`.
With a single `struct Layer` the closed open ended `trait Layer`, `trait
PersistentLayer` and `struct RemoteLayer` are removed following noting
that compaction could be simplified by simply not using any of the
traits in between: #4839.
The new `struct Layer` is a preliminary to remove
`Timeline::layer_removal_cs` documented in #4745.
Preliminaries: #4936, #4937, #5013, #5014, #5022, #5033, #5044, #5058,
#5059, #5061, #5074, #5103, epic #5172, #5645, #5649. Related split off:
#5057, #5134.
## Problem
This line caused lots of errors to be emitted for healthy tenants.
## Summary of changes
Downgrade to debug, since it is an expected code path we'll take for
tenants at startup.
## Problem
We'll need to switch `REMOTE_STORAGE_AZURE_REGION` from the current
`eastus2` region to something `eu-central-1`-like. This may require
changing `AZURE_STORAGE_ACCESS_KEY`.
To make it possible to switch from one place (not to break a lot of
builds on CI), move `REMOTE_STORAGE_AZURE_CONTAINER` and
`REMOTE_STORAGE_AZURE_REGION` to GitHub Variables.
See https://github.com/neondatabase/neon/settings/variables/actions
## Summary of changes
- Get values for `REMOTE_STORAGE_AZURE_CONTAINER` &
`REMOTE_STORAGE_AZURE_REGION` from GitHub Variables
a single operation instead of N uploads and 1 deletion scheduling with
write(layer_map) lock releasing in the between. Compaction update will
make for a much better place to change how the operation will change in
future compared to more general file based operations.
builds upon #5645. solves the problem of difficult to see hopeful
correctness w.r.t. other `index_part.json` changing operations.
Co-authored-by: Shany Pozin <shany@neon.tech>
All loading (attached, or from disk) timelines overwrite the global
gauge for physical size. The `_set` method cannot be used safely, so
remove it and just "add" the physical size.
## Problem
Logical replication requires new AUX_FILES_KEY which is definitely
absent in existed database.
We do not have function to check if key exists in our KV storage.
So I have to handle the error in `list_aux_files` method.
But this key is also included in key space range and accessed y
`create_image_layer` method.
## Summary of changes
Check if AUX_FILES_KEY exists before including it in keyspace.
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Shany Pozin <shany@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
This does two things: first a minor refactor to not use HTTP/1.x
style header names and also to not panic if some certain requests had no
"Accept" header. As a second thing, it addresses the third bullet point
from #3689:
> Change `get_lsn_by_timestamp` API method to return LSN even if we only
found commit before the specified timestamp.
This is done by adding a version parameter to the `get_lsn_by_timestamp`
API call and making its behaviour depend on the version number.
Part of #3414 (but doesn't address it in its entirety).
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
Our serverless backend was a bit jumbled. As a comment indicated, we
were handling SQL-over-HTTP in our `websocket.rs` file.
I've extracted out the `sql_over_http` and `websocket` files from the
`http` module and put them into a new module called `serverless`.
## Summary of changes
```sh
mkdir proxy/src/serverless
mv proxy/src/http/{conn_pool,sql_over_http,websocket}.rs proxy/src/serverless/
mv proxy/src/http/server.rs proxy/src/http/health_server.rs
mv proxy/src/metrics proxy/src/usage_metrics.rs
```
I have also extracted the hyper server and handler from websocket.rs
into `serverless.rs`
Two of the most common spurious log messages:
- broker connections terminate & we log at error severity. Unfortunately
tonic gives us an "Unknown" error so to suppress these we're doing
string matching. It's hacky but worthwhile for operations.
- the first iteration of tenant background tasks tends to over-run its
schedule and emit a warning. Ultimately we should fix these to run on
time, but for now we are not benefiting from polluting our logs with the
warnings.
## Problem
We started to store test results in a new format in
https://github.com/neondatabase/neon/pull/4549.
This PR switches scripts to query this db.
(we can completely remove old DB/ingestions scripts in a couple of
weeks after the PR merged)
## Summary of changes
- `scripts/benchmark_durations.py` query new database
- `scripts/flaky_tests.py` query new database
## Problem
We defer the returning of connections the the connection pool. It's
possible for our test to be faster than the returning of connections -
which then gets a differing process ID because it opens a new
connection.
## Summary of changes
1. Delay the tests just a little (20ms) to give more chance for
connections to return.
2. Correlate connection IDs with the connection logs a bit more
Quest: #4745. Prerequisite for #4938. Original
https://github.com/neondatabase/neon/pull/4938#issuecomment-1777150665.
The new Layer implementation has so far been using
`RemoteTimelineClient::schedule_layer_file_deletion` from `Layer::drop`
but it was noticed that this could mean that the L0s compaction wanted
to remove could linger in the index part for longer time or be left
there for longer time. Solution is to split the
`RemoteTimelineClient::schedule_layer_file_deletion` into two parts:
- unlinking from index_part.json, to be called from end of compaction
and gc
- scheduling of actual deletions, to be called from `Layer::drop`
The added methods are added unused.
- finally add an `#[instrument]` to Timeline::create_image_layers,
making it easier to see that something is happening because we create
image layers
- format some macro context code
- add a warning not to create new validation functions a la parse do not
validate
Split off from #5198.
Only applicable change was neondatabase/autoscaling#571, removing the
postgres_exporter flags `--auto-discover-databases` and
`--exclude-databases=...`
## Problem
Compaction's source of truth for what layers exist is the LayerManager.
`flush_frozen_layer` updates LayerManager before it has scheduled upload
of the frozen layer.
Compaction can then "see" the new layer, decide to delete it, schedule
uploads of replacement layers, all before `flush_frozen_layer` wakes up
again and schedules the upload. When the upload is scheduled, the local
layer file may be gone, in which case we end up with no such layer in
remote storage, but an entry still added to IndexPart pointing to the
missing layer.
## Summary of changes
Schedule layer uploads inside the `self.layers` lock, so that whenever a
frozen layer is present in LayerManager, it is also present in
RemoteTimelineClient's metadata.
Closes: #5635
## Problem
Looking at logs, I saw more retries being performed for other quota
exceeded errors
## Summary of changes
Filter out all quota exceeded family of errors
The `azure_upload_download_works` test is not cleaning up after itself,
leaving behind the files it is uploading. I found these files when
looking at the contents of the bucket in #5627.
We now clean up the file we uploaded before, like the other tests do it
as well.
Follow-up of #5546
## Problem
https://github.com/neondatabase/neon/pull/5580 will move the remote
deletion marker into the `timelines/` path.
This would cause old pageserver code to fail loading the tenant due to
an apparently invalid timeline ID. That would be a problem if we had to
roll back after deploying #5580
## Summary of changes
If a `deleted` file is in `timelines/` just ignore it.
## Problem
When the number of tenants is large, sequentially issuing the open/read
calls for their config files is a ~1000ms delay during startup. It's not
a lot, but it's simple to fix.
## Summary of changes
Put all the config loads into spawn_blocking() tasks and run them in a
JoinSet. We can simplify this a bit later when we have full async disk
I/O.
---------
Co-authored-by: Shany Pozin <shany@neon.tech>
Before this PR, the ticker was running at default miss behavior `Delay`.
For example, here is the startup output with 25k tenants:
```
2023-10-19T09:57:21.682466Z INFO synthetic_size_worker: starting calculate_synthetic_size_worker
2023-10-19T10:50:44.678202Z WARN synthetic_size_worker: task iteration took longer than the configured period elapsed=3202.995707156s period=10m task=ConsumptionMetricsSyntheticSizeWorker
2023-10-19T10:52:17.408056Z WARN synthetic_size_worker: task iteration took longer than the configured period elapsed=2695.72556035s period=10m task=ConsumptionMetricsSyntheticSizeWorker
```
The first message's `elapsed` value is correct. It matches the
delta between the log line timestamps.
The second one is logged ca 1.5min after, though, but reports a much
larger
`elapsed` than 1.5min.
This PR fixes the behavior by copying what `eviction_task.rs` does.
## Problem
I recently updated the latency timers to include cache miss and pool
miss, as well as connection protocol. By moving the latency timer to
start before authentication, we count a lot more failures and it's
messed up the latency dashboard.
## Summary of changes
Add another label to LatencyTimer metrics for outcome. Explicitly report
on success
## Problem
Every database request locks this cancel map rwlock. At high requests
per second this would have high contention
## Summary of changes
Switch to dashmap which has a sharded rwlock to reduce contention
## Problem
We now persist tenant configuration every time we spawn a tenant. The
persist_tenant_config function is doing a series of non-async filesystem
I/O, because `crashsafe::` isn't async yet. This isn't a demonstrated
problem, but is a source of uncertainty when reasoning about what's
happening with our startup times.
## Summary of changes
- Wrap `crashsafe_overwrite` in `spawn_blocking`.
- Although I think this change makes sense, it does not have a
measurable impact on load time when testing with 10k tenants.
- This can be reverted when we have full async I/O
Stacked atop https://github.com/neondatabase/neon/pull/5559
Before this PR, there was the following race condition:
```
T1: polls for writeable stdin
T1: writes to stdin
T1: enters poll for stdout/stderr
T2: enters poll for stdin write
WALREDO: writes to stderr
KERNEL: wakes up T1 and T2
Tx: reads stderr and prints it
Ty: reads stderr and gets EAGAIN
(valid values for (x, y) are (1, 2) or (2, 1))
```
The concrete symptom that we observed repeatedly was with PG16,
which started logging `registered custom resource manager`
to stderr always, during startup, thereby giving us repeated
opportunity to hit above race condition. PG14 and PG15 didn't log
anything to stderr, hence we could have only hit this race condition
if there was an actual error happening.
This PR fixes the race by moving the reading of stderr into a tokio
task. It exits when the stderr is closed by the child process, which
in turn happens when the child exits, either by itself or because
we killed it.
The downside is that the async scheduling can reorder the log messages,
which can be seen in the new `test_stderr`, which runs in a
single-threaded runtime. I included the output below.
Overall I think we should move the entire walredo to async, as Joonas
proposed many months ago. This PR's asyncification is just the first
step to resolve these
false page reconstruction errors.
After this is fixed, we should stop printing that annoying stderr
message
on walredo startup; it causes noise in the pageserver logs.
That work is tracked in #5399 .
```
2023-10-13T19:05:21.878858Z ERROR apply_wal_records{tenant_id=d546fb76ba529195392fb4d19e243991 pid=753986}: failed to write out the walredo errored input: No such file or directory (os error 2) target=walredo-1697223921878-1132-0.walredo length=1132
2023-10-13T19:05:21.878932Z DEBUG postgres applied 2 WAL records (1062 bytes) in 114666 us to reconstruct page image at LSN 0/0
2023-10-13T19:05:21.878942Z ERROR error applying 2 WAL records 0/16A9388..0/16D4080 (1062 bytes) to base image with LSN 0/0 to reconstruct page image at LSN 0/0 n_attempts=0: apply_wal_records
Caused by:
WAL redo process closed its stdout unexpectedly
2023-10-13T19:05:21.879027Z INFO kill_and_wait_impl{pid=753986}: wait successful exit_status=signal: 11 (SIGSEGV) (core dumped)
2023-10-13T19:05:21.879079Z DEBUG wal-redo-postgres-stderr{pid=753986 tenant_id=d546fb76ba529195392fb4d19e243991 pg_version=16}: wal-redo-postgres stderr_logger_task started
2023-10-13T19:05:21.879104Z ERROR wal-redo-postgres-stderr{pid=753986 tenant_id=d546fb76ba529195392fb4d19e243991 pg_version=16}: received output output="2023-10-13 19:05:21.769 GMT [753986] LOG: registered custom resource manager \"neon\" with ID 134\n"
2023-10-13T19:05:21.879116Z DEBUG wal-redo-postgres-stderr{pid=753986 tenant_id=d546fb76ba529195392fb4d19e243991 pg_version=16}: wal-redo-postgres stderr_logger_task finished
2023-10-13T19:05:22.004439Z ERROR apply_wal_records{tenant_id=d546fb76ba529195392fb4d19e243991 pid=754000}: failed to write out the walredo errored input: No such file or directory (os error 2) target=walredo-1697223922004-1132-0.walredo length=1132
2023-10-13T19:05:22.004493Z DEBUG postgres applied 2 WAL records (1062 bytes) in 125344 us to reconstruct page image at LSN 0/0
2023-10-13T19:05:22.004501Z ERROR error applying 2 WAL records 0/16A9388..0/16D4080 (1062 bytes) to base image with LSN 0/0 to reconstruct page image at LSN 0/0 n_attempts=1: apply_wal_records
Caused by:
WAL redo process closed its stdout unexpectedly
2023-10-13T19:05:22.004588Z INFO kill_and_wait_impl{pid=754000}: wait successful exit_status=signal: 11 (SIGSEGV) (core dumped)
2023-10-13T19:05:22.004624Z DEBUG wal-redo-postgres-stderr{pid=754000 tenant_id=d546fb76ba529195392fb4d19e243991 pg_version=16}: wal-redo-postgres stderr_logger_task started
2023-10-13T19:05:22.004653Z ERROR wal-redo-postgres-stderr{pid=754000 tenant_id=d546fb76ba529195392fb4d19e243991 pg_version=16}: received output output="2023-10-13 19:05:21.884 GMT [754000] LOG: registered custom resource manager \"neon\" with ID 134\n"
2023-10-13T19:05:22.004666Z DEBUG wal-redo-postgres-stderr{pid=754000 tenant_id=d546fb76ba529195392fb4d19e243991 pg_version=16}: wal-redo-postgres stderr_logger_task finished
```
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Loading tenants shouldn't hang. However, if it does, we shouldn't let
one hung tenant prevent the entire process from starting background
jobs.
## Summary of changes
Generalize the timeout mechanism that we already applied to loading
initial logical sizes: each phase in startup where we wait for a barrier
is subject to a timeout, and startup will proceed if it doesn't complete
within timeout.
Startup metrics will still reflect the time when a phase actually
completed, rather than when we skipped it.
The code isn't the most beautiful, but that kind of reflects the
awkwardness of await'ing on a future and then stashing it to await again
later if we time out. I could imagine making this cleaner in future by
waiting on a structure that doesn't self-destruct on wait() the way
Barrier does, then make InitializationOrder into a structure that
manages the series of waits etc.
Implements fetching of WAL by safekeeper from another safekeeper by imitating
behaviour of last elected leader. This allows to avoid WAL accumulation on
compute and facilitates faster compute startup as it doesn't need to download
any WAL. Actually removing WAL download in walproposer is a matter of another
patch though.
There is a per timeline task which always runs, checking regularly if it should
start recovery frome someone, meaning there is something to fetch and there is
no streaming compute. It then proceeds with fetching, finishing when there is
nothing more to receive.
Implements https://github.com/neondatabase/neon/pull/4875
Fixes an issue we observed on staging that happens when the
autoscaler-agent attempts to immediately downscale the VM after binding,
which is typical for pooled computes.
The issue was occurring because the autoscaler-agent was requesting
downscaling before the vm-monitor had gathered sufficient cgroup memory
stats to be confident in approving it. When the vm-monitor returned an
internal error instead of denying downscaling, the autoscaler-agent
retried the connection and immediately hit the same issue (in part
because cgroup stats are collected per-connection, rather than
globally).
## Problem
Fix elog format error in wallog_mapping_file
## Summary of changes
Use proper case to avoid compilation warning=error in C at MacOS.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
There's currently an issue with the vm-monitor on staging that's not
really feasible to debug because the current display impl gives no
context to the errors (just says "failed to downscale").
Logging the full error should help.
For communications with the autoscaler-agent, it's ok to only provide
the outermost cause, because we can cross-reference with the VM logs.
At some point in the future, we may want to change that.
Create Rust bindings for C functions from walproposer. This allows to
write better tests with real walproposer code without spawning multiple
processes and starting up the whole environment.
`make walproposer-lib` stage was added to build static libraries
`libwalproposer.a`, `libpgport.a`, `libpgcommon.a`. These libraries can
be statically linked to any executable to call walproposer functions.
`libs/walproposer/src/walproposer.rs` contains
`test_simple_sync_safekeepers` to test that walproposer can be called
from Rust to emulate sync_safekeepers logic. It can also be used as a
usage example.
There is a bunch of duplication and manual Result handling that can be
simplified by moving the error conversion into a shared function, using
`map_err`, and the question mark operator.
## Problem
See #5468.
## Summary of changes
Add a new `get_timestamp_of_lsn` endpoint, returning the timestamp
associated with the given lsn.
Fixes#5468.
---------
Co-authored-by: Shany Pozin <shany@neon.tech>
## Problem
S3 can give us a 500 whenever it likes: when this happens at request
level we eat it in `backoff::retry`, but when it happens for a key
inside a DeleteObjects request, we log it at warn level.
## Summary of changes
Allow-list this class of log message in all tests.
## Problem
See https://github.com/neondatabase/company_projects/issues/111
## Summary of changes
Save logical replication files in WAL at compute and include them in
basebackup at pate server.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
## Problem
- QueryError always logged at error severity, even though disconnections
are not true errors.
- QueryError type is not expressive enough to distinguish actual errors
from shutdowns.
- In some functions we're returning Ok(()) on shutdown, in others we're
returning an error
## Summary of changes
- Add QueryError::Shutdown and use it in places we check for
cancellation
- Adopt consistent Result behavior: disconnects and shutdowns are always
QueryError, not ok
- Transform shutdown+disconnect errors to Ok(()) at the very top of the
task that runs query handler
- Use the postgres protocol error code for "admin shutdown" in responses
to clients when we are shutting down.
Closes: #5517
tl;dr it's really hard to avoid throttling from memory.high, and it
counts tmpfs & page cache usage, so it's also hard to make sense of.
In the interest of fixing things quickly with something that should be
*good enough*, this PR switches to instead periodically fetch memory
statistics from the cgroup's memory.stat and use that data to determine
if and when we should upscale.
This PR fixes#5444, which has a lot more detail on the difficulties
we've hit with memory.high. This PR also supersedes #5488.
## Problem
We need a flag to require proxy protocol (prerequisite for #5416)
## Summary of changes
Add a cli flag to require client IP addresses. Error if IP address is
missing when the flag is active.
## Problem
Transactions break connections in the pool
fixes#4698
## Summary of changes
* Pool `Client`s are smart object that return themselves to the pool
* Pool `Client`s can be 'discard'ed
* Pool `Client`s are discarded when certain errors are encountered.
* Pool `Client`s are discarded when ReadyForQuery returns a non-idle
state.
This test is listing files in a timeline and then evicting them: if the
test ran slowly this could encounter temp files for unfinished
downloads: fix by filtering these out in evict_all_layers.
Before this PR, when we restarted pageserver, we'd see a rush of
`$number_of_tenants` concurrent eviction tasks starting to do imitate
accesses building up in the period of `[init_order allows activations,
$random_access_delay + EvictionPolicyLayerAccessThreshold::period]`.
We simply cannot handle that degree of concurrent IO.
We already solved the problem for compactions by adding a semaphore.
So, this PR shares that semaphore for use by evictions.
Part of https://github.com/neondatabase/neon/issues/5479
Which is again part of https://github.com/neondatabase/neon/issues/4743
Risks / Changes In System Behavior
==================================
* we don't do evictions as timely as we currently do
* we log a bunch of warnings about eviction taking too long
* imitate accesses and compactions compete for the same concurrency
limit, so, they'll slow each other down through this shares semaphore
Changes
=======
- Move the `CONCURRENT_COMPACTIONS` semaphore into `tasks.rs`
- Rename it to `CONCURRENT_BACKGROUND_TASKS`
- Use it also for the eviction imitate accesses:
- Imitate acceses are both per-TIMELINE and per-TENANT
- The per-TENANT is done through coalescing all the per-TIMELINE
tasks via a tokio mutex `eviction_task_tenant_state`.
- We acquire the CONCURRENT_BACKGROUND_TASKS permit early, at the
beginning of the eviction iteration, much before the imitate
acesses start (and they may not even start at all in the given
iteration, as they happen only every $threshold).
- Acquiring early is **sub-optimal** because when the per-timline
tasks coalesce on the `eviction_task_tenant_state` mutex,
they are already holding a CONCURRENT_BACKGROUND_TASKS permit.
- It's also unfair because tenants with many timelines win
the CONCURRENT_BACKGROUND_TASKS more often.
- I don't think there's another way though, without refactoring
more of the imitate accesses logic, e.g, making it all per-tenant.
- Add metrics for queue depth behind the semaphore.
I found these very useful to understand what work is queued in the
system.
- The metrics are tagged by the new `BackgroundLoopKind`.
- On a green slate, I would have used `TaskKind`, but we already had
pre-existing labels whose names didn't map exactly to task kind.
Also the task kind is kind of a lower-level detail, so, I think
it's fine to have a separate enum to identify background work kinds.
Future Work
===========
I guess I could move the eviction tasks from a ticker to "sleep for
$period".
The benefit would be that the semaphore automatically "smears" the
eviction task scheduling over time, so, we only have the rush on restart
but a smeared-out rush afterward.
The downside is that this perverts the meaning of "$period", as we'd
actually not run the eviction at a fixed period. It also means the the
"took to long" warning & metric becomes meaningless.
Then again, that is already the case for the compaction and gc tasks,
which do sleep for `$period` instead of using a ticker.
Fixes#5172 as it:
- removes recoinciliation with remote index_part.json and accepts remote
index_part.json as the truth, deleting any local progress which is yet
to be reflected in remote
- moves to prefer remote metadata
Additionally:
- tests with single LOCAL_FS parametrization are cleaned up
- adds a test case for branched (non-bootstrap) local only timeline
availability after restart
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: John Spray <john@neon.tech>
## Problem
I found some issues with the `/location_config` API when writing new
tests.
## Summary of changes
- Calling the API with the "Detached" state is now idempotent.
- `Tenant::spawn_attach` now takes a boolean to indicate whether to
expect a marker file. Marker files are used in the old attach path, but
not in the new location conf API. They aren't needed because in the New
World, the choice of whether to attach via remote state ("attach") or to
trust local state ("load") will be revised to cope with the transitions
between secondary & attached (see
https://github.com/neondatabase/neon/issues/5550). It is okay to merge
this change ahead of that ticket, because the API is not used in the
wild yet.
- Instead of using `schedule_local_tenant_processing`, the location conf
API handler does its own directory creation and calls `spawn_attach`
directly.
- A new `unsafe_create_dir_all` is added. This differs from
crashsafe::create_dir_all in two ways:
- It is intentionally not crashsafe, because in the location conf API we
are no longer using directory or config existence as the signal for any
important business logic.
- It is async and uses `tokio::fs`.
Before this PR, the following race condition existed:
```
T1: does the apply_wal_records() call and gets back an error
T2: does the apply_wal_records() call and gets back an error
T2: does the kill_and_shutdown
T2: new loop iteration
T2: launches new walredo process
T1: does the kill_and_shutdown of the new process
```
That last step is wrong, T2 already did the kill_and_shutdown.
The symptom of this race condition was that T2 would observe an error
when it tried to do something with the process after T1 killed it.
For example, but not limited to:
`POLLHUP` / `"WAL redo process closed its stderr unexpectedly"`.
The fix in this PR is the following:
* Use Arc to represent walredo processes.
The Arc lives at least as long as the walredo process.
* Use Arc::ptr_eq to determine whether to kill the process or not.
The price is an additional RwLock to protect the new `redo_process`
field
that holds the Arc. I guess that could perhaps be an atomic pointer
swap some day. But, let's get one race fixed without risking introducing
a new one.
The use of Arc/drop is also not super great here because it now allows
for an unlimited number of to-be-killed processes to exist concurrently.
See the various `NB` comments above `drop(proc)` for why it's "ok" right
now due to the blocking `wait` inside `drop`.
Note: an earlier fix attempt was
https://github.com/neondatabase/neon/pull/5545
where we apply_batch_postgres would compare stdout_fd for equality.
That's incorrect because the kernel can reuse the file descriptor when
T2 launches the new process.
Details:
https://github.com/neondatabase/neon/pull/5545#pullrequestreview-1676589373
## Problem
In 89275f6c1e we fixed an issue, when we were dropping db in Postgres
even though cplane request failed. Yet, it introduced a new problem that
we now de-register db in cplane even if we didn't actually drop it in
Postgres.
## Summary of changes
Here we revert extension change, so we now again may leave db in invalid
state after failed drop. Instead, `compute_ctl` is now responsible for
cleaning up invalid databases during full configuration. Thus, there are
two ways of recovering from failed DROP DATABASE:
1. User can just repeat DROP DATABASE, same as in Vanilla Postgres.
2. If they didn't, then on next full configuration (dbs / roles changes
in the API; password reset; or data availability check) invalid db
will be cleaned up in the Postgres and re-created by `compute_ctl`. So
again it follows pretty much the same semantics as Vanilla Postgres --
you need to drop it again after failed drop.
That way, we have a recovery trajectory for both problems.
See this commit for info about `invalid` db state:
a4b4cc1d60
According to it:
> An invalid database cannot be connected to anymore, but can still be
dropped.
While on it, this commit also fixes another issue, when `compute_ctl`
was trying to connect to databases with `ALLOW CONNECTIONS false`. Now
it will just skip them.
Fixes#5435
## Problem
Currently it's unclear how much of the `initial_tenant_load` period is
in S3 objects, and therefore how impactful it is to make changes to
remote operations during startup.
## Summary of changes
- `Tenant::load` is refactored to load remote indices in parallel and to
wait for all these remote downloads to finish before it proceeds to
construct any `Timeline` objects.
- `pageserver_startup_duration_seconds` gets a new `phase` value of
`initial_tenant_load_remote` which counts the time from startup to when
the last tenant finishes loading remote content.
- `test_pageserver_restart` is extended to validate this phase. The
previous version of the test was relying on order of dict entries, which
stopped working when adding a phase, so this is refactored a bit.
- `test_pageserver_restart` used to explicitly create a branch, now it
uses the default initial_timeline. This avoids startup getting held up
waiting for logical sizes, when one of the branches is not in use.
Adds prototype-level support for [Azure blob storage](https://azure.microsoft.com/en-us/products/storage/blobs). Some corners were cut, see the TODOs and the followup issue #5567 for details.
Steps to try it out:
* Create a storage account with block blobs (this is a per-storage
account setting).
* Create a container inside that storage account.
* Set the appropriate env vars: `AZURE_STORAGE_ACCOUNT,
AZURE_STORAGE_ACCESS_KEY, REMOTE_STORAGE_AZURE_CONTAINER,
REMOTE_STORAGE_AZURE_REGION`
* Set the env var `ENABLE_REAL_AZURE_REMOTE_STORAGE=y` and run `cargo
test -p remote_storage azure`
Fixes #5562
## Problem
Bug was introduced by me in 83ae2bd82c
When eviction constructs a RemoteLayer to replace the layer it just
evicted, it is building a LayerFileMetadata using its _current_
generation, rather than the generation of the layer.
## Summary of changes
- Retrieve Generation from RemoteTimelineClient when evicting. This will
no longer be necessary when #4938 lands.
- Add a test for the scenario in question (this fails without the fix).
For 2 weeks we've seen rare, spurious, not-reproducible page
reconstruction
failures with PG16 in prod.
One of the commits we deployed this week was
Commit
commit fc467941f9
Author: Joonas Koivunen <joonas@neon.tech>
Date: Wed Oct 4 16:19:19 2023 +0300
walredo: log retryed error (#546)
With the logs from that commit, we learned that some read() or write()
system call that walredo does fails with `EAGAIN`, aka
`Resource temporarily unavailable (os error 11)`.
But we have no idea where exactly in the code we get back that error.
So, use anyhow instead of fake std::io::Error's as an easy way to get
a backtrace when the error happens, and change the logging to print
that backtrace (i.e., use `{:?}` instead of
`utils::error::report_compact_sources(e)`).
The `WalRedoError` type had to go because we add additional `.context()`
further up the call chain before we `{:?}`-print it. That additional
`.context()` further up doesn't see that there's already an
anyhow::Error
inside the `WalRedoError::ApplyWalRecords` variant, and hence captures
another backtrace and prints that one on `{:?}`-print instead of the
original one inside `WalRedoError::ApplyWalRecords`.
If we ever switch back to `report_compact_sources`, we should make sure
we have some other way to uniquely identify the places where we return
an error in the error message.
## Problem
Currently proxy doesn't handle array of json parameters correctly.
## Summary of changes
Added one more level of quotes escaping for the array of jsons case.
Resolves: https://github.com/neondatabase/neon/issues/5515
## Problem
The `Deleter` currently doesn't use a backoff::retry because it doesn't
need to: it is already inside a loop when doing the deletion, so can
just let the loop go around.
However, this is a problem for logging, because we log on errors, which
includes things like 503/429 cases that would usually be swallowed by a
backoff::retry in most places we use the RemoteStorage interface.
The underlying problem is that RemoteStorage doesn't have a proper error
type, and an anyhow::Error can't easily be interrogated for its original
S3 SdkError because downcast_ref requires a concrete type, but SdkError
is parametrized on response type.
## Summary of changes
Wrap remote deletions in Deleter in a backoff::retry to avoid logging
warnings on transient 429/503 conditions, and for symmetry with how
RemoteStorage is used in other places.
## Problem
When we got an error in the payload of a DeleteObjects response, we only
logged how many errors, not what they were.
## Summary of changes
Log up to 10 specific errors. We do not log all of them because that
would be up to 1000 log lines per request.
## Problem
These types/functions are public and it prevents clippy from catching
unused things.
## Summary of changes
Move to `pub(crate)` and remove the error enum that becomes clearly
unused as a result.
## Problem
- `test_heavy_write_workload` is flaky, and fails because of to
statement timeout
- `test_wal_lagging` is flaky and fails because of the default pytest
timeout (see https://github.com/neondatabase/neon/issues/5305)
## Summary of changes
- `test_heavy_write_workload`: increase statement timeout to 5 minutes
(from default 2 minutes)
- `test_wal_lagging`: increase pytest timeout to 600s (from default
300s)
## Problem
Hard to tell
1. How many clients are connected to proxy
2. How many requests clients are making
3. How many connections are made to a database
1 and 2 are different because of the properties of HTTP.
We have 2 already tracked through `proxy_accepted_connections_total` and
`proxy_closed_connections_total`, but nothing for 1 and 3
## Summary of changes
Adds 2 new counter gauges.
*
`proxy_opened_client_connections_total`,`proxy_closed_client_connections_total`
- how many client connections are open to proxy
*
`proxy_opened_db_connections_total`,`proxy_closed_db_connections_total`
- how many active connections are made through to a database.
For TCP and Websockets, we expect all 3 of these quantities to be
roughly the same, barring users connecting but with invalid details.
For HTTP:
* client_connections/connections can differ because the client
connections can be reused.
* connections/db_connections can differ because of connection pooling.
## Problem
close https://github.com/neondatabase/neon/issues/4702
## Summary of changes
This PR adds a new metrics for wake up errors and breaks it down by most
common reasons (mostly follows the `could_retry` implementation).
## Problem
If a caller detaches a tenant and then attaches it again, pending
deletions from the old attachment might not have happened yet. This is
not a correctness problem, but it causes:
- Risk of leaking some objects in S3
- Some warnings from the deletion queue when pending LSN updates and
pending deletions don't pass validation.
## Summary of changes
- Deletion queue now uses UnboundedChannel so that the push interfaces
don't have to be async.
- This was pulled out of https://github.com/neondatabase/neon/pull/5397,
where it is also useful to be able to drive the queue from non-async
contexts.
- Why is it okay for this to be unbounded? The only way the
unbounded-ness of the channel can become a problem is if writing out
deletion lists can't keep up, but if the system were that overloaded
then the code generating deletions (GC, compaction) would also be
impacted.
- DeletionQueueClient gets a new `flush_advisory` function, which is
like flush_execute, but doesn't wait for completion: this is appropriate
for use in contexts where we would like to encourage the deletion queue
to flush, but don't need to block on it.
- This function is also expected to be useful in next steps for seamless
migration, where the option to flush to S3 while transitioning into
AttachedStale will also include flushing deletion queue, but we wouldn't
want to block on that flush.
- The tenant_detach code in mgr.rs invokes flush_advisory after stopping
the `Tenant` object.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
We don't want to retry customer quota exhaustion errors.
## Summary of changes
Make sure both types of quota exhaustion errors are not retried
## Problem
See https://neondb.slack.com/archives/C05U648A9NJ
In case of failure of flush in prefetch,
prefetch state is reseted. We need to retry register buffer attempt,
otherwise we will get assertion failure.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
Seen in CI for https://github.com/neondatabase/neon/pull/5453 -- the
time gap between validation completing and the header getting written is
long enough to fail the test, where it was doing a cheeky 1 second
sleep.
## Summary of changes
- Replace 1 second sleep with a wait_until to see the header file get
written
- Use enums as test params to make the results more readable (instead of
True-False parameters)
- Fix the temp suffix used for deletion queue headers: this worked fine,
but resulted in `..tmp` extension.
## Problem
Writes to the postgres client socket from the page server were not
wrapped in cancellation handling, so a stuck client connection could
prevent tenant shutdowwn.
## Summary of changes
All the places we call flush() to write to the socket, we should be
respecting the cancellation token for the task.
In this PR, I explicitly pass around a CancellationToken rather than
doing inline `task_mgr::shutdown_token` calls, to avoid coupling it to
the global task_mgr state and make it easier to refactor later.
I have some follow-on commits that add a Shutdown variant to QueryError
and use it more extensively, but that's pure refactor so will keep
separate from this bug fix PR.
Closes: https://github.com/neondatabase/neon/issues/5341
Part of #5172. First commits show that we used to allow starting up a
compute or creating a branch off a not yet uploaded timeline. This PR
moves activation of a timeline to happen **after** initial layer file(s)
(if any) and `index_part.json` have been uploaded. Simply moving
activation to be *after* downloads have finished works because we now
spawn a task per http request handler.
Current behaviour of uploading on the timelines on next startup is kept,
to be removed later as part of #5172.
Adds:
- `NeonCli.map_branch` and corresponding `neon_local` implementation:
allow creating computes for timelines managed via pageserver http
client/api
- possibly duplicate tests (I did not want to search for, will cleanup
in a follow-up if these duplicated)
Changes:
- make `wait_until_tenant_state` return immediatedly on `Broken` and not
wait more
## Problem
Fix neon_local pageserver status command
#5430
## Summary of changes
Fix clap config for pageserver status subcommand
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
## Problem
Pageservers with `control_plane_api` configured require a control plane
to start up: in an incident this might be a problem.
## Summary of changes
Note to reviewers: most of the code churn in mgr.rs is the refactor
commit that enables the later emergency mode commit: you may want to
review commits separately.
- Add `control_plane_emergency_mode` configuration property
- Refactor init_tenant_mgr to separate loading configurations from the
main loop where we construct Tenant, so that the generations fetch can
peek at the configs in emergency mode.
- During startup, in emergency mode, attach any tenants that were
attached on their last run, using the same generation number.
Closes: #5381
Closes: https://github.com/neondatabase/neon/issues/5492
## Problem
Spun off from https://github.com/neondatabase/neon/pull/5449
Timeline deletion does the following:
1. Delete layers referenced in the index
2. Delete everything else in the timeline prefix, except the index
3. Delete the index.
When generations were added, the filter in step 2 got outdated, such
that the index objects were deleted along with everything else at step
2. That didn't really break anything, but it makes an automated test
unhappy and is a violation of the original intent of the code, which
presumably intends to upload an invariant that as long as any objects
for a timeline exist, the index exists.
(Eventually, this index-object-last complexity can go away: when we do
https://github.com/neondatabase/neon/issues/5080, there is no need to
keep the index_part around, as deletions can always be retried any time
any where.)
## Summary of changes
After object listing, split the listed objects into layers and index
objects. Delete the layers first, then the index objects.
Doesn't do an upgrade of rustc to 1.73.0 as we want to wait for the
cargo response of the curl CVE before updating. In preparation for an
update, we address the clippy lints that are newly firing in 1.73.0.
Problem
=======
Prior to this PR, when we had a cache miss, we'd get back a write guard,
fill it, the drop it and retry the read from cache.
If there's severe contention for the cache, it could happen that the
just-filled data gets evicted before our retry, resulting in lost work
and no forward progress.
Solution
========
This PR leverages the now-available `tokio::sync::RwLockWriteGuard`'s
`downgrade()` functionality to turn the filled slot write guard into a
read guard.
We don't drop the guard at any point, so, forward progress is ensured.
Refs
====
Stacked atop https://github.com/neondatabase/neon/pull/5480
part of https://github.com/neondatabase/neon/issues/4743
specifically part of https://github.com/neondatabase/neon/issues/5479
If there are any layermap or layer file related problems, having a
reproducable `get_page@lsn` easily usable for fast debugging iteration
is helpful.
Split off from #4938.
Later evolved to add http apis for:
- `get_page@lsn` at
`/v1/tenant/:tenant_id/timeline/:timeline_id/get?key=<hex>&lsn=<lsn
string>`
- collecting the keyspace at
`/v1/tenant/:tenant_id/timeline/:timeline_id/keyspace?[at_lsn=<lsn
string>]`
- defaults to `last_record_lsn`
collecting the keyspace seems to yield some ranges for which there is no
key.
503 Resource Unavailable appears as error in logs, but is not really an
error which should ever fail a test on, or even log an error in prod,
[evidence].
Changes:
- log 503 as `info!` level
- use `Cow<'static, str>` instead of `String`
- add an additional `wait_until_tenant_active` in
`test_actually_duplicate_l1`
We ought to have in tests "wait for tenants to complete loading" but
this is easier to implement for now.
[evidence]:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-5485/6423110295/index.html#/testresult/182de66203864fc0
## Problem
`test_tenant_delete_is_resumed_on_attach` is flaky
## Summary of changes
- Allow race in `test_tenant_delete_is_resumed_on_attach`
- Cleanup `allowed_errors` in the file a bit
Clean subprocess output so that:
- one line of output is just one line without a linebreak
- like shells handle `echo subshell says: $(echo foo)`
- multiple lines are indented like other pytest output
- error output is dedented and then indented to be like other pytest
output
Minor readability changes remove friction.
This patch extracts all postgres-dependent functions in a separate
`walproposer_api` functions struct. It helps to compile walproposer as
static library without compiling all other postgres server code. This is
useful to allow calling walproposer C code from Rust, or linking this
library with anything else.
All global variables containing walproposer state were extracted to a
separate `WalProposer` struct. This makes it possible to run several
walproposers in the same process, in separate threads.
There were no logic changes and PR mostly consists of shuffling
functions between several files. We have a good test coverage for
walproposer code and I've seen no issues with tests while I was
refactoring it, so I don't expect any issues after merge.
ref https://github.com/neondatabase/neon/issues/547
---------
Co-authored-by: Arseny Sher <sher-ars@yandex.ru>
## Problem
This test was unstable when run in parallel with lots of others: if the
pageserver stayed up long enough for some of the deletions to get
validated, they won't be discarded on restart the way the test expects
when keep_attachment=True. This was a test bug, not a pageserver bug.
## Summary of changes
- Add failpoints to control plane api client
- Use failpoint to pause validation in the test to cover the case where
it had been flaky
- Add a metric for the number of deleted keys validated
- Add a permutation to the test to additionally exercise the case where
we _do_ validate lists before restart: this is a coverage enhancement
that seemed sensible when realizing that the test was relying on nothing
being validated before restart.
- the test will now always enter the restart with nothing or everything
validated.
## Problem
These changes are part of building seamless tenant migration, as
described in the RFC:
- https://github.com/neondatabase/neon/pull/5029
## Summary of changes
- A new configuration type `LocationConf` supersedes `TenantConfOpt` for
storing a tenant's configuration in the pageserver repo dir. It contains
`TenantConfOpt`, as well as a new `mode` attribute that describes what
kind of location this is (secondary, attached, attachment mode etc). It
is written to a file called `config-v1` instead of `config` -- this
prepares us for neatly making any other profound changes to the format
of the file in future. Forward compat for existing pageserver code is
achieved by writing out both old and new style files. Backward compat is
achieved by checking for the old-style file if the new one isn't found.
- The `TenantMap` type changes, to hold `TenantSlot` instead of just
`Tenant`. The `Tenant` type continues to be used for attached tenants
only. Tenants in other states (such as secondaries) are represented by a
different variant of `TenantSlot`.
- Where `Tenant` & `Timeline` used to hold an Arc<Mutex<TenantConfOpt>>,
they now hold a reference to a AttachedTenantConf, which includes the
extra information from LocationConf. This enables them to know the
current attachment mode.
- The attachment mode is used as an advisory input to decide whether to
do compaction and GC (AttachedStale is meant to avoid doing uploads,
AttachedMulti is meant to avoid doing deletions).
- A new HTTP API is added at `PUT /tenants/<tenant_id>/location_config`
to drive new location configuration. This provides a superset of the
functionality of attach/detach/load/ignore:
- Attaching a tenant is just configuring it in an attached state
- Detaching a tenant is configuring it to a detached state
- Loading a tenant is just the same as attaching it
- Ignoring a tenant is the same as configuring it into Secondary with
warm=false (i.e. retain the files on disk but do nothing else).
Caveats:
- AttachedMulti tenants don't do compaction in this PR, but they do in
the follow on #5397
- Concurrent updates to the `location_config` API are not handled
elegantly in this PR, a better mechanism is added in the follow on
https://github.com/neondatabase/neon/pull/5367
- Secondary mode is just a placeholder in this PR: the code to upload
heatmaps and do downloads on secondary locations will be added in a
later PR (but that shouldn't change any external interfaces)
Closes: https://github.com/neondatabase/neon/issues/5379
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
these JoinSets live for the duration of the process. they might have
many millions of connections spawned on them and they never get cleared.
Fixes#4672
## Summary of changes
Drain the connections as we go
## Problem
In #5383 this configuration was added, but it missed the parts of the
Builder class that let it actually be used.
## Summary of changes
Add `control_plane_api_token` hooks to PageserverConfigBuilder
If the cgroup integration was not enabled, this would cause compute_ctl
to leak memory.
Thankfully, we never use vm-monitor *without* the cgroup handling
enabled, so this wasn't actually impacting us, but... it still looked
suspicious, so figured it was worth changing.
We overwrite L1 layers if compaction gets interrupted. We did not have a
test showing that we do in fact do this.
The test might be a bit flaky due to timestamp usage, but separating for
smaller diff in as part of #5172.
Also removes an unrelated 200s pgbench from the test suite.
## Problem
- Because we compress artifacts file by file, we don't need to put them
into `tar` containers (ie instead of `tar.gz` we can use just `gz`).
- Pythons gz single-threaded and pretty slow.
A benchmark has shown ~20 times speedup (19.876176291 vs
0.8748335830000009) on my laptop (for a pageserver.log size is 1.3M)
## Summary of changes
- Replace tarfile with zstandart
- Update allure to 2.24.0
Fixes#4689 by replacing all of `std::Path` , `std::PathBuf` with
`camino::Utf8Path`, `camino::Utf8PathBuf` in
- pageserver
- safekeeper
- control_plane
- libs/remote_storage
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
1MB request body is apparently too small for some clients
## Summary of changes
Update to 10 MB request body. Also revert the removal of response limits
while we don't have streaming support.
We currently lose the actual reason the first walredo attempt failed.
Together with implicit retry making it difficult to eyeball what is
happening.
PR version keeps the logging the same error message twice, which is what
we've been doing all along. However correlating the retrying case and
the finally returned error is difficult, because the actual error
message was left out before this PR.
Lastly, log the final error we present to postgres *in the same span*,
not outside it. Additionally, suppress the stacktrace as the comment
suggested.
We have rare walredo failures with pg16.
Let's introduce recording of failing walredo input in `#[cfg(feature =
"testing")]`. There is additional logging (the value reconstruction path
logging usually shown with not found keys), keeping it for
`#[cfg(features = "testing")]`.
Cc: #5404.
## Problem
Duplication of error in log
Fixes#5366
## Summary of changes
Removed `{0}` from error description above each enum due to presence of
`#[source]` to avoid duplication
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
## Problem
Folks have re-taged releases for `pg_jsonschema` and `pg_graphql` (to
increase timeouts on their CI), for us, these are a noop changes,
but unfortunately, this will cause our builds to fail due to checksums
mismatch (this might not strike right away because of the build cache).
- 8ba7c7be9d
- aa7509370a
## Summary of changes
- `pg_jsonschema` update checksum
- `pg_graphql` update checksum
## Problem
The 500 status code should only be used for bugs or unrecoverable
failures: situations we did not expect. Currently, the pageserver is
misusing this response code for some situations that are totally normal,
like requests targeting tenants that are in the process of activating.
The 503 response is a convenient catch-all for "I can't right now, but I
will be able to".
## Summary of changes
- Change some transient availability error conditions to return 503
instead of 500
- Update the HTTP client configuration in integration tests to retry on
503
After these changes, things like creating a tenant and then trying to
create a timeline within it will no longer require carefully checking
its status first, or retrying on 500s. Instead, a client which is
properly configured to retry on 503 can quietly handle such situations.
- Update `pg_jsonschema` to 0.2.0 with Postgres 16 support
- Update `pg_grapgql` to 1.4.0 with Postgres 16 support
- Remove `pgx` (old name of `pgrx`) layer from Dockerfile
- Update `pgx-ulid` from 0.1.0 to 0.1.3, and add it to Postgres 16
- Add `pg_tiktoken` to Postgres 16 image
Closes#5374
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
If the control plane happened to respond to a DROP DATABASE request with
a non-200 response, we'd abort the DROP DATABASE transaction in the
usual spot. However, Postgres for some reason actually performs the drop
inside of `standard_ProcessUtility`. As such, the database was left in a
weird state after aborting the transaction. We had test coverage of a
failed CREATE DATABASE but not a failed DROP DATABASE.
## Summary of changes
Since DROP DATABASE can't be inside of a transaction block, we can just
forward the DDL changes to the control plane inside of
`ProcessUtility_hook`, and if we respond with 500 bail out of
`ProcessUtility` before we perform the drop. This change also adds a
test, which reproduced the invalid database issue before the fix was
applied.
It is wasteful to cycle through the page cache slots trying to find a
victim slot if all the slots are currently un-evictable because a read /
write guard is alive.
We suspect this wasteful cycling to be the root cause for an
"indigestion" we observed in staging (#5291).
The hypothesis is that we `.await` after we get ahold of a read / write
guard, and that tokio actually deschedules us in favor of another
future.
If that other future then needs a page slot, it can't get ours because
we're holding the guard.
Repeat this, and eventually, the other future(s) will find themselves
doing `find_victim` until they hit `exceeded evict iter limit`.
The `find_victim` is wasteful and CPU-starves the futures that are
already holding the read/write guard. A `yield` inside `find_victim`
could mitigate the starvation, but wouldn't fix the wasting of CPU
cycles.
So instead, this PR queues waiters behind a tokio semaphore that counts
evictable slots.
The downside is that this stops the clock page replacement if we have 0
evictable slots.
Also, as explained by the big block comment in `find_victims`, the
semaphore doesn't fully prevent starvation because because we can't make
tokio prioritize those tasks executing `find_victim` that have been
trying the longest.
Implementation
===============
We need to acquire the semaphore permit before locking the slot.
Otherwise, we could deadlock / discover that all permits are gone and
would have to relinquish the slot, having moved forward the Clock LRU
without making progress.
The downside is that, we never get full throughput for read-heavy
workloads, because, until the reader coalesces onto an existing permit,
it'll hold its own permit.
Addendum To Root-Cause Analysis In #5291
========================================
Since merging that PR, @arpad-m pointed out that we couldn't have
reached the `slot.write().await` with his patches because the
VirtualFile slots can't have all been write-locked, because we only hold
them locked while the IO is ongoing, and the IO is still done with
synchronous system calls in that patch set, so, we can have had at most
$number_of_executor_threads locked at any given time.
I count 3 tokio runtimes that do `Timeline::get`, each with 8 executor
threads in our deployment => $number_of_executor_threads = 3*8 = 24 .
But the virtual file cache has 100 slots.
We both agree that nothing changed about the core hypothesis, i.e.,
additional await points inside VirtualFile caused higher concurrency
resulting in exhaustion of page cache slots.
But we'll need to reproduce the issue and investigate further to truly
understand the root cause, or find out that & why we were indeed using
100 VirtualFile slots.
TODO: could it be compaction that needs to hold guards of many
VirtualFile's in its iterators?
## Problem
I've noticed that `hermit-abi`
0.3.1 [1] has been yanked from crates.io (looks like nothing too
bad [2]).
Also, we have 2 versions of `hermit-api` in dependencies (0.3.* and
0.2.*), update `num-cpus` to use the latest `hermit-api` 0.3.3.
- [1] https://crates.io/crates/hermit-abi/0.3.1
- [2] https://github.com/hermit-os/hermit-rs/issues/436
## Summary of changes
- `cargo update -p num-cpus`
- `cargo update -p hermit-abi`
- Unignore `RUSTSEC-2023-0052` in `deny.toml` (it has been fixed in
https://github.com/neondatabase/neon/pull/5069)
## Problem
Our SNI error dashboard features IP addresses but it's not immediately
clear who that is still (#5369)
## Summary of changes
Log some startup params with this error
## Problem
This test has been flaky for a long time.
As far as I can tell, the test was simply wrong to expect postgres
activity to result in deterministic sizes: making the match fuzzy is not
a hack, it's just matching the reality that postgres doesn't promise to
write exactly the same number of pages every time it runs a given query.
## Summary of changes
Equalities now tolerate up to 4 pages different. This is big enough to
tolerate the deltas we've seen in practice.
Closes: https://github.com/neondatabase/neon/issues/2962
It is usually not intended to notify a random member of the compute team
for pageserver PRs.
Leaving the notification of the storage team in place, because this
serves a purpose when some external contributor opens a PR and isn't
sure who to ask.
## Problem
Because `neon_local` by default runs with no remote storage, it was not
running the deletion queue workers, and the attempt to call into
`recover()` was failing.
This is a bogus configuration that will go away when we make remote
storage mandatory.
## Summary of changes
Don't try and do deletion queue recovery when remote storage is
disabled.
The reason we don't just unset `control_plane_api` to avoid this is that
generations will soon become mandatory, irrespective of when we make
remote storage mandatory.
This effectively reverts #3832.
There's a couple issues we just discovered with the free space monitor,
and to my knowledge, the fact we're putting the file cache on a separate
filesystem (even when on disk) that's guaranteed to have more room than
the maximum size means that this free space monitor should have no
effect.
More details:
1. The control plane sets the maximum file cache size based on max CU
2. The control plane sets the size of the filesystem underlying the file
cache based on the maximum user selectable CU (or, if the endpoint is
larger, then that size), so that there's always enough room
3. If postmaster gets SIGKILL'd, then the free space monitor process
does not exit
4. If the free space monitor is acting on the cache file but not subject
to locking or up-to-date metadata from a newer postgres instance, then
this could lead to data corruption.
So, in practice I belive the risk of data corruption is *low* but not
nothing, and given the issues we hit because of (3), and given that this
the free space monitor shouldn't be necessary because of (1) and (2),
it's best to just remove it outright.
See also: neondatabase/autoscaling#534, #5405
## Problem
We need to count metrics always when a connection is open. Not only when
the transfer is 0.
We also need to count bytes usage for HTTP.
## Summary of changes
New structure for usage metrics. A `DashMap<Ids, Arc<Counters>>`.
If the arc has 1 owner (the map) then I can conclude that no connections
are open.
If the counters has "open_connections" non zero, then I can conclude a
new connection was opened in the last interval and should be reported
on.
Also, keep count of how many bytes processed for HTTP and report it
here.
Part of #5172. Builds upon #5243, #5298. Includes the test changes:
- no more RemoteStorageKind.NOOP
- no more testing of pageserver without remote storage
- benchmarks now use LOCAL_FS as well
Support for running without RemoteStorage is still kept but in practice,
there are no tests and should not be any tests.
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Currently we don't have a way to migrate tenants from one pageserver to
another without a risk of gap in availability.
## Summary of changes
This follows on from https://github.com/neondatabase/neon/pull/4919
Migrating tenants between pageservers is essential to operating a
service
at scale, in several contexts:
1. Responding to a pageserver node failure by migrating tenants to other
pageservers
2. Balancing load and capacity across pageservers, for example when a
user expands their
database and they need to migrate to a pageserver with more capacity.
3. Restarting pageservers for upgrades and maintenance
Currently, a tenant may migrated by attaching to a new node,
re-configuring endpoints to use the new node, and then later detaching
from the old node. This is safe once [generation
numbers](025-generation-numbers.md) are implemented, but does meet
our seamless/fast/efficient goals:
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Problem
Over the past couple days, we've had a couple VMs hit issues with
postgres getting hit by memory.high throttling, even after #5303 was
supposed to fix that. The tl;dr of those issues is that because
vm-monitor startup sets the file cache size first, before interacting
with the cgroup, cgroup throttling can mean we timeout connecting to the
file cache and never reset the cgroup, even if memory has been upscaled
since then.
See e.g.:
- https://neondb.slack.com/archives/C03F5SM1N02/p1695218132208249
- https://neondb.slack.com/archives/C03F5SM1N02/p1695314613696659
## Summary of changes
This PR adds an additional step into vm-monitor startup, where we first
set the cgroup's memory.high value to 'max', removing the capacity for
throttling. This preferable to just setting memory.high before the file
cache, because it's theoretically possible that the new value of
memory.high could still be less than the current memory usage, in which
case postgres could continue to be throttled without sufficient memory
events to relieve that.
Implementing this properly involved adding a method to our internal
cgroup interface, and it seemed like there was duplicated functionality
there, so this PR unifies that as well, making things a bit more
consistent.
## Problem
Control plane API calls in prod will need authentication.
## Summary of changes
`control_plane_api_token` config is loaded and set as HTTP
`Authorization` header.
Closes: https://github.com/neondatabase/neon/issues/5139
When you log more than a few blocks, you need to reserve the space in
advance. We didn't do that, so we got errors. Now we do that, and
shouldn't get errors.
Fixes#3978. `test_partial_evict_tenant` can fail multiple times so even
though we retry it as flaky, it will still haunt us.
Originally was going to just relax the comparison, then ended up
replacing warming up to use full table scans instead of `pgbench
--select-only`. This seems to help by producing the expected layer
accesses. There might be something off with how many layers pg16
produces compared to pg14 and pg15. Created #5392.
## Problem
Pageservers must not delete objects or advertise updates to
remote_consistent_lsn without checking that they hold the latest
generation for the tenant in question (see [the RFC](
https://github.com/neondatabase/neon/blob/main/docs/rfcs/025-generation-numbers.md))
In this PR:
- A new "deletion queue" subsystem is introduced, through which
deletions flow
- `RemoteTimelineClient` is modified to send deletions through the
deletion queue:
- For GC & compaction, deletions flow through the full generation
verifying process
- For timeline deletions, deletions take a fast path that bypasses
generation verification
- The `last_uploaded_consistent_lsn` value in `UploadQueue` is replaced
with a mechanism that maintains a "projected" lsn (equivalent to the
previous property), and a "visible" LSN (which is the one that we may
share with safekeepers).
- Until `control_plane_api` is set, all deletions skip generation
validation
- Tests are introduced for the new functionality in
`test_pageserver_generations.py`
Once this lands, if a pageserver is configured with the
`control_plane_api` configuration added in
https://github.com/neondatabase/neon/pull/5163, it becomes safe to
attach a tenant to multiple pageservers concurrently.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Fixes#5072. See proof from
https://github.com/neondatabase/neon/issues/5072#issuecomment-1735580798.
Turns out multiple threads can get the same nanoseconds since epoch, so
switch to using millis (for finding the prefix later on) and randomness
via `thread_rng` (protect against adversial ci runners).
Also changes the "per test looking alike" prefix to more "general"
prefix.
The TaskKind dimension added in #5339 is insufficient to understand what
kind of data causes the cache hits.
Regarding performance considerations: I'm not too worried because we're
moving from 3 to 4 one-byte sized fields; likely the space now used by
the new field was padding before. Didn't check this, though, and it
doesn't matter, we need the data.
What I don't like about this PR is that we have an `Unknown` content
type, and I also don't like that there's no compile-time way to assert
that it's set to something != `Unknown` when calling the page cache.
But, this is what I could come up with before tomorrow’s release, and I
think it covers the hot paths.
## Problem
See https://neondb.slack.com/archives/C033RQ5SPDH/p1694595347598249
## Summary of changes
Update last written LSN after walloging all createdb stuff
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Should have added them in the initial PR #5186.
Would have been nice to test the failure cases as well, but, without
mocking the FS, that's too hard / platform-dependent.
This PR adds a `task_kind` label to page cache access metrics.
These are to validate our hypothesis that the high hit page cache rate
we observe in prod is due to internal tasks, not getpage requests from
compute.
We believe the latter should near-always be a pageserver-page-cache
_miss_ because compute has it's own page cache, and hence there is no
locality of reference for its accesses to pageserver page cache.
Before this PR, we didn't have `RequestContext` propagation to any code
below the on-demand downloader.
The vast majority of changes in this PR is concerned with adding that
propagation.
## Problem
Compute start time has improved, but the timing of connection retries
from the proxy is rather slow, meaning we could be making clients wait
hundreds of milliseconds longer than necessary.
## Summary of changes
Previously, retry time in ms was `100 * 1.5**n`, and `n` starts at 1,
giving: 150, 225, 337, 506, 759, 1139, 1709, ...
This PR changes that to `25 * sqrt(2)**(n - 1)` instead, giving: 25, 35,
50, 71, 100, 141, 200, ...
## Problem
Do not allow new installation of deprecated `hnsw` extension.
The same approach as in https://github.com/neondatabase/neon/pull/5345
## Summary of changes
- Remove `trusted = true` from `hnsw.control`
- Remove `hnsw` related targets from Makefile
## Problem
Before releasing new version to production, we'd like to run a set of
required checks on the incoming release.
The simplest approach, which doesn't require many changes — dedicate one
staging region to `preprod` installation.
The proposed changes to the release flow are the following:
- When a release PR is merged into the release branch — trigger
deployment from the release branch to a dedicated staging-preprod region
(for now, it's going to be `eu-west-1` — Ireland)
Corresponding infrastructure PR:
https://github.com/neondatabase/aws/pull/585
## Summary of changes
- Trigger `deploy.dev` workflow with `-f deployPreprodRegion=true` for
release branch
## Problem
In 83e7e5dbbd dependencies were only
updated for Mac users. Without libicu, postgres 16 build fails.
## Summary of changes
Update dependencies on Ubuntu and fedora to include libicu.
## Problem
See https://neondb.slack.com/archives/C05L7D1JAUS/p1693775881474019
## Summary of changes
Do not perform local file cache resizing in processes having no PGPROC
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Split off from #5297. Builds upon #5326. Handles original review
comments which I did not move to earlier split PRs. Completes test
support for verifying events by notifying of the last batch of events.
Adds cleaning up of tempfiles left because of an unlucky shutdown or
SIGKILL.
Finally closes#5175.
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Only notable change is including neondatabase/autoscaling#523, which we
hope will help with making sure that TCP connections are properly
terminated before shutdown (which hopefully fixes a leak in the
pageserver).
## Problem
We didn't have a Postgres 16 snapshot of data to run compatibility tests
on, but now we have it (since the release).
## Summary of changes
- remove `@skip_on_postgres(PgVersion.V16, ...)` from compatibility
tests
this should allow test
test_delete_tenant_exercise_crash_safety_failpoints with
debug-pg16-Check.RETRY_WITH_RESTART-mock_s3-tenant-delete-before-remove-timelines-dir-True
to pass more reliably.
The test is still flaky, perhaps more after #5233, see #3831.
Do one more `timeline_checkpoint` *after* shutting down safekeepers
*before* shutting down pageserver. Put more effort into not compacting
or creating image layers.
With the addition of the "stateful event verification" the
test_consumption_metrics.py is now too crowded. Split it up for
pageserver and proxy.
Split from #5297.
Write collected metrics to disk to recover previously sent metrics on
restart.
Recover the previously collected metrics during startup, send them over
at right time
- send cached synthetic size before actual is calculated
- when `last_record_lsn` rolls back on startup
- stay at last sent `written_size` metric
- send `written_size_delta_bytes` metric as 0
Add test support: stateful verification of events in python tests.
Fixes: #5206
Cc: #5175 (loggings, will be enhanced in follow-up)
Split off from #5297.
There should be no functional changes here:
- refactor tenant metric "production" like previously timeline, allows
unit testing, though not interesting enough yet to test
- introduce type aliases for tuples
- extra refactoring for `collect`, was initially thinking it was useful
but will do a inline later
- shorter binding names
- support for future allocation reuse quests with IdempotencyKey
- move code out of tokio::select to make it rustfmt-able
- generification, allow later replacement of `&'static str` with enum
- add tests that assert sent event contents exactly
## Problem
VM should be updated if XLH_LOCK_ALL_FROZEN_CLEARED flags is set in
XLOG_HEAP_LOCK,XLOG_HEAP_2_LOCK_UPDATED WAL records
## Summary of changes
Add handling of this records in walingest.rs
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
It was utterly broken on v15 before commit 83e7e5dbbd, which fixed the
incorrect definition of XLOG_DBASE_CREATE_WAL_LOG. We never noticed
because we had no tests for it.
## Problem
In many places in test code, paths are built manually from what
NeonEnv.tenant_dir and NeonEnv.timeline_dir could do.
## Summary of changes
1. NeonEnv.tenant_dir and NeonEnv.timeline_dir moved under class
NeonPageserver as the path they use is per-pageserver instance.
2. Used these everywhere to replace manual path building
Closes#5258
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
## Problem
See https://neondb.slack.com/archives/C05L7D1JAUS/p1694614585955029https://www.notion.so/neondatabase/Duplicate-key-issue-651627ce843c45188fbdcb2d30fd2178
## Summary of changes
Swap old/new block references
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
- `gh pr list` fails with `unknown argument "main"; please quote all
values that have spaces due to using a variable with the wrong name
- `permissions: write-all` are too wide for the job
## Summary of changes
- For variable name `HEAD` -> `BRANCH`
- Grant only required permissions for each job
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Refactor tests to have less globals.
This will allow to hopefully write more complex tests for our new metric
collection requirements in #5297. Includes reverted work from #4761
related to test globals.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: MMeent <matthias@neon.tech>
## Problem
There was a bug in lfc_ensure_opened which actually disables LFC
## Summary of changes
Return true ifLFC file is normally opened
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
- pagestore_smgr.c had unnecessary WALSync() (see #5287 )
- Compute node dockerfile didn't build the neon_rmgr extension
- Add PostgreSQL 16 image to docker-compose tests
- Fix issue with high CPU usage in Safekeeper due to a bug in WALSender
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
If @github-actions creates release PR, the CI pipeline is not triggered
(but we have `release-notify.yml` workflow that we expect to run on this
event).
I suspect this happened because @github-actions is not a repository
member.
Ref
https://github.com/neondatabase/neon/pull/5283#issuecomment-1715209291
## Summary of changes
- Use `CI_ACCESS_TOKEN` to create a PR
- Use `gh` instead of `thomaseizinger/create-pull-request`
- Restrict permissions for GITHUB_TOKEN to `contents: write` only
(required for `git push`)
## Problem
`ci-run/pr-*` branches (and attached PRs) should be deleted
automatically when their parent PRs get closed.
But there are not
## Summary of changes
- Fix if-condition
## Problem
We don't have this instruction written anywhere but in internal Slack
## Summary of changes
- Add `How to run a CI pipeline on Pull Requests from external
contributors` section to `CONTRIBUTING.md`
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Motivation
==========
We observed two "indigestion" events on staging, each shortly after
restarting `pageserver-0.eu-west-1.aws.neon.build`. It has ~8k tenants.
The indigestion manifests as `Timeline::get` calls failing with
`exceeded evict iter limit` .
The error is from `page_cache.rs`; it was unable to find a free page and
hence failed with the error.
The indigestion events started occuring after we started deploying
builds that contained the following commits:
```
[~/src/neon]: git log --oneline c0ed362790caa368aa65ba57d352a2f1562fd6bf..15eaf78083ecff62b7669
091da1a1c8b4f60ebf8
15eaf7808 Disallow block_in_place and Handle::block_on (#5101)
a18d6d9ae Make File opening in VirtualFile async-compatible (#5280)
76cc87398 Use tokio locks in VirtualFile and turn with_file into macro (#5247)
```
The second and third commit are interesting.
They add .await points to the VirtualFile code.
Background
==========
On the read path, which is the dominant user of page cache & VirtualFile
during pageserver restart, `Timeline::get` `page_cache` and VirtualFile
interact as follows:
1. Timeline::get tries to read from a layer
2. This read goes through the page cache.
3. If we have a page miss (which is known to be common after restart),
page_cache uses `find_victim` to find an empty slot, and once it has
found a slot, it gives exclusive ownership of it to the caller through a
`PageWriteGuard`.
4. The caller is supposed to fill the write guard with data from the
underlying backing store, i.e., the layer `VirtualFile`.
5. So, we call into `VirtualFile::read_at`` to fill the write guard.
The `find_victim` method finds an empty slot using a basic
implementation of clock page replacement algorithm.
Slots that are currently in use (`PageReadGuard` / `PageWriteGuard`)
cannot become victims.
If there have been too many iterations, `find_victim` gives up with
error `exceeded evict iter limit`.
Root Cause For Indigestion
==========================
The second and third commit quoted in the "Motivation" section
introduced `.await` points in the VirtualFile code.
These enable tokio to preempt us and schedule another future __while__
we hold the `PageWriteGuard` and are calling `VirtualFile::read_at`.
This was not possible before these commits, because there simply were no
await points that weren't Poll::Ready immediately.
With the offending commits, there is now actual usage of
`tokio::sync::RwLock` to protect the VirtualFile file descriptor cache.
And we __know__ from other experiments that, during the post-restart
"rush", the VirtualFile fd cache __is__ too small, i.e., all slots are
taken by _ongoing_ VirtualFile operations and cannot be victims.
So, assume that VirtualFile's `find_victim_slot`'s
`RwLock::write().await` calls _will_ yield control to the executor.
The above can lead to the pathological situation if we have N runnable
tokio tasks, each wanting to do `Timeline::get`, but only M slots, N >>
M.
Suppose M of the N tasks win a PageWriteGuard and get preempted at some
.await point inside `VirtualFile::read_at`.
Now suppose tokio schedules the remaining N-M tasks for fairness, then
schedules the first M tasks again.
Each of the N-M tasks will run `find_victim()` until it hits the
`exceeded evict iter limit`.
Why? Because the first M tasks took all the slots and are still holding
them tight through their `PageWriteGuard`.
The result is massive wastage of CPU time in `find_victim()`.
The effort to find a page is futile, but each of the N-M tasks still
attempts it.
This delays the time when tokio gets around to schedule the first M
tasks again.
Eventually, tokio will schedule them, they will make progress, fill the
`PageWriteGuard`, release it.
But in the meantime, the N-M tasks have already bailed with error
`exceeded evict iter limit`.
Eventually, higher level mechanisms will retry for the N-M tasks, and
this time, there won't be as many concurrent tasks wanting to do
`Timeline::get`.
So, it will shake out.
But, it's a massive indigestion until then.
This PR
=======
This PR reverts the offending commits until we find a proper fix.
```
Revert "Use tokio locks in VirtualFile and turn with_file into macro (#5247)"
This reverts commit 76cc87398c.
Revert "Make File opening in VirtualFile async-compatible (#5280)"
This reverts commit a18d6d9ae3.
```
This adds PostgreSQL 16 as a vendored postgresql version, and adapts the
code to support this version.
The important changes to PostgreSQL 16 compared to the PostgreSQL 15
changeset include the addition of a neon_rmgr instead of altering Postgres's
original WAL format.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
The sequence that can lead to a deadlock:
1. DELETE request gets all the way to `tenant.shutdown(progress,
false).await.is_err() ` , while holding TENANTS.read()
2. POST request for tenant creation comes in, calls `tenant_map_insert`,
it does `let mut guard = TENANTS.write().await;`
3. Something that `tenant.shutdown()` needs to wait for needs a
`TENANTS.read().await`.
The only case identified in exhaustive manual scanning of the code base
is this one:
Imitate size access does `get_tenant().await`, which does
`TENANTS.read().await` under the hood.
In the above case (1) waits for (3), (3)'s read-lock request is queued
behind (2)'s write-lock, and (2) waits for (1).
Deadlock.
I made a reproducer/proof-that-above-hypothesis-holds in
https://github.com/neondatabase/neon/pull/5281 , but, it's not ready for
merge yet and we want the fix _now_.
fixes https://github.com/neondatabase/neon/issues/5284
## Problem
Previously, we were using `observe_closure_duration` in `VirtualFile`
file opening code, but this doesn't support async open operations, which
we want to use as part of #4743.
## Summary of changes
* Move the duration measurement from the `with_file` macro into a
`observe_duration` macro.
* Some smaller drive-by fixes to replace the old strings with the new
variant names introduced by #5273
Part of #4743, follow-up of #5247.
## Problem
For #4743, we want to convert everything up to the actual I/O operations
of `VirtualFile` to `async fn`.
## Summary of changes
This PR is the last change in a series of changes to `VirtualFile`:
#5189, #5190, #5195, #5203, and #5224.
It does the last preparations before the I/O operations are actually
made async. We are doing the following things:
* First, we change the locks for the file descriptor cache to tokio's
locks that support Send. This is important when one wants to hold locks
across await points (which we want to do), otherwise the Future won't be
Send. Also, one shouldn't generally block in async code as executors
don't like that.
* Due to the lock change, we now take an approach for the `VirtualFile`
destructors similar to the one proposed by #5122 for the page cache, to
use `try_write`. Similarly to the situation in the linked PR, one can
make an argument that if we are in the destructor and the slot has not
been reused yet, we are the only user accessing the slot due to owning
the lock mutably. It is still possible that we are not obtaining the
lock, but the only cause for that is the clock algorithm touching the
slot, which should be quite an unlikely occurence. For the instance of
`try_write` failing, we spawn an async task to destroy the lock. As just
argued however, most of the time the code path where we spawn the task
should not be visited.
* Lastly, we split `with_file` into a macro part, and a function part
that contains most of the logic. The function part returns a lock
object, that the macro uses. The macro exists to perform the operation
in a more compact fashion, saving code from putting the lock into a
variable and then doing the operation while measuring the time to run
it. We take the locks approach because Rust has no support for async
closures. One can make normal closures return a future, but that
approach gets into lifetime issues the moment you want to pass data to
these closures via parameters that has a lifetime (captures work). For
details, see
[this](https://smallcultfollowing.com/babysteps/blog/2023/03/29/thoughts-on-async-closures/)
and
[this](https://users.rust-lang.org/t/function-that-takes-an-async-closure/61663)
link. In #5224, we ran into a similar problem with the `test_files`
function, and we ended up passing the path and the `OpenOptions`
by-value instead of by-ref, at the expense of a few extra copies. This
can be done as the data is cheaply copyable, and we are in test code.
But here, we are not, and while `File::try_clone` exists, it [issues
system calls
internally](1e746d7741/library/std/src/os/fd/owned.rs (L94-L111)).
Also, it would allocate an entirely new file descriptor, something that
the fd cache was built to prevent.
* We change the `STORAGE_IO_TIME` metrics to support async.
Part of #4743.
Introduce the `StorageIoOperation` enum, `StorageIoTime` struct, and
`STORAGE_IO_TIME_METRIC` static which provides lockless access to
histograms consumed by `VirtualFile`.
Closes#5131
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Assorted flakyness fixes from #5198, might not be flaky on `main`.
Migrate some tests using neon_simple_env to just neon_env_builder and
using initial_tenant to make flakyness understanding easier. (Did not
understand the flakyness of
`test_timeline_create_break_after_uninit_mark`.)
`test_download_remote_layers_api` is flaky because we have no atomic
"wait for WAL, checkpoint, wait for upload and do not receive any more
WAL".
`test_tenant_size` fixes are just boilerplate which should had always
existed; we should wait for the tenant to be active. similarly for
`test_timeline_delete`.
`test_timeline_size_post_checkpoint` fails often for me with reading
zero from metrics. Give it a few attempts.
## Problem
Detaching a tenant can involve many thousands of local filesystem
metadata writes, but the control plane would benefit from us not
blocking detach/delete responses on these.
## Summary of changes
After rename of local tenant directory ack tenant detach and delete
tenant directory in background
#5183
---------
Signed-off-by: Rahul Modpur <rmodpur2@gmail.com>
## Problem
Another thing I overlooked regarding'approved-for-ci-run`:
- When we create a PR, the action is associated with @vipvap and this
triggers the pipeline — this is good.
- When we update the PR by force-pushing to the branch, the action is
associated with @github-actions, which doesn't trigger a pipeline — this
is bad.
Initially spotted in #5239 / #5211
([link](https://github.com/neondatabase/neon/actions/runs/6122249456/job/16633919558?pr=5239))
— `check-permissions` should not fail.
## Summary of changes
- Use `CI_ACCESS_TOKEN` to check out the repo (I expect this token will
be reused in the following `git push`)
## Problem
When PR `ci-run/pr-*` is created the GitHub Autocomment with test
results are supposed to be posted to the original PR, currently, this
doesn't work.
I created this PR from a personal fork to debug and fix the issue.
## Summary of changes
- `scripts/comment-test-report.js`: use `pull_request.head` instead of
`pull_request.base` 🤦
## Problem
Add a CI pipeline that checks GitHub Workflows with
https://github.com/rhysd/actionlint (it uses `shellcheck` for shell
scripts in steps)
To run it locally: `SHELLCHECK_OPTS=--exclude=SC2046,SC2086 actionlint`
## Summary of changes
- Add `.github/workflows/actionlint.yml`
- Fix actionlint warnings
Some VMs, when already scaled up as much as possible, end up spamming
the autoscaler-agent with upscale requests that will never be fulfilled.
If postgres is using memory greater than the cgroup's memory.high, it
can emit new memory.high events 1000 times per second, which... just
means unnecessary load on the rest of the system.
This changes the vm-monitor so that we skip sending upscale requests if
we already sent one within the last second, to avoid spamming the
autoscaler-agent. This matches previous behavior that the vm-informant
hand.
## Problem
This PR creates a GitHub release from a release tag with an
autogenerated changelog: https://github.com/neondatabase/neon/releases
## Summary of changes
- Call GitHub API to create a release
See #5001
No space is what's expected if we're at size limit.
Of course if SK incorrectly returned "no space", the availability check
wouldn't fire.
But users would notice such a bug quite soon anyways.
So ignoring "no space" is the right trade-off.
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
refer #5208
## Problem
See
https://neondb.slack.com/archives/C03H1K0PGKH/p1693938336062439?thread_ts=1693928260.704799&cid=C03H1K0PGKH#5208 disable LFC forever in case of error. It is not good because the
problem causing this error (for example ENOSPC) can be resolved anti
will be nice to reenable it after fixing.
Also #5208 disables LFC locally in one backend. But other backends may
still see corrupted data.
It should not cause problems right now with "permission denied" error
because there should be no backend which is able to normally open LFC.
But in case of out-of-disk-space error, other backend can read corrupted
data.
## Summary of changes
1. Cleanup hash table after error to prevent access to stale or
corrupted data
2. Perform disk write under exclusive lock (hoping it will not affect
performance because usually write just copy data from user to system
space)
3. Use generations to prevent access to stale data in lfc_read
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
I forgot a `str(...)` conversion in #5243. This lead to log lines such
as:
```
Using fs root 'PosixPath('/tmp/test_output/test_backward_compatibility[debug-pg14]/compatibility_snapshot/repo/local_fs_remote_storage/pageserver')' as a remote storage
```
This surprisingly works, creating hierarchy of under current working
directory (`repo_dir` for tests):
- `PosixPath('`
- `tmp` .. up until .. `local_fs_remote_storage`
- `pageserver')`
It should not work but right now test_compatibility.py tests finds local
metadata and layers, which end up used. After #5172 when remote storage
is the source of truth it will no longer work.
## Problem
A bunch of fixes for different test-related things
## Summary of changes
- Fix test_runner/pg_clients (`subprocess_capture` return value has
changed)
- Do not run create-test-report if check-permissions failed for not
cancelled jobs
- Fix Code Coverage comment layout after flaky tests. Add another
healing "\n"
- test_compatibility: add an instruction for local run
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
Currently our testing environment only supports running a single
pageserver at a time. This is insufficient for testing failover and
migrations.
- Dependency of writing tests for #5207
## Summary of changes
- `neon_local` and `neon_fixture` now handle multiple pageservers
- This is a breaking change to the `.neon/config` format: any local
environments will need recreating
- Existing tests continue to work unchanged:
- The default number of pageservers is 1
- `NeonEnv.pageserver` is now a helper property that retrieves the first
pageserver if there is only one, else throws.
- Pageserver data directories are now at `.neon/pageserver_{n}` where n
is 1,2,3...
- Compatibility tests get some special casing to migrate neon_local
configs: these are not meant to be backward/forward compatible, but they
were treated that way by the test.
See
https://neondb.slack.com/archives/C03H1K0PGKH/p1692550646191429
## Problem
Build index concurrently is writing WAL outside transaction.
`backpressure_throttling_impl` doesn't perform throttling for read-only
transactions (not assigned XID).
It cause huge write lag which can cause large delay of accessing the
table.
## Summary of changes
Looks at `PROC_IN_SAFE_IC` in process state set during concurrent index
build.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Prepare to upgrade rust version to latest stable.
- `rustfmt` has learned to format `let irrefutable = $expr else { ...
};` blocks
- There's a new warning about virtual (workspace) crate resolver, picked
the latest resolver as I suspect everyone would expect it to be the
latest; should not matter anyways
- Some new clippies, which seem alright
Remote storage cleanup split from #5198:
- pageserver, extensions, and safekeepers now have their separate remote
storage
- RemoteStorageKind has the configuration code
- S3Storage has the cleanup code
- with MOCK_S3, pageserver, extensions, safekeepers use different
buckets
- with LOCAL_FS, `repo_dir / "local_fs_remote_storage" / $user` is used
as path, where $user is `pageserver`, `safekeeper`
- no more `NeonEnvBuilder.enable_xxx_remote_storage` but one
`enable_{pageserver,extensions,safekeeper}_remote_storage`
Should not have any real changes. These will allow us to default to
`LOCAL_FS` for pageserver on the next PR, remove
`RemoteStorageKind.NOOP`, work towards #5172.
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
`test_runner/performance/test_startup.py::test_startup` started to fail
more frequently because of the timeout.
Let's increase the timeout to see the failures on the perf dashboard.
## Summary of changes
- Increase timeout for`test_startup` from 600 to 900 seconds
The v1.4.0 includes changes to make it compile with PostgreSQL 16. The
commit log doesn't call it out explicitly, but I tested it manually.
v1.4.0 includes some new functions, but I tested manually that the the
v1.3.1 functionality works with the v1.4.0 version of the library. That
means that this doesn't break existing installations. Users can do
"ALTER EXTENSION hypopg UPDATE" if they want to use the new v1.4.0
functionality, but they don't have to.
This includes PostgreSQL 16 support. No other changes, really.
The extension version in the upstream was changed from 2.17 to 2.18,
however, there is no difference between the catalog objects. So if you
had installed 2.17 previously, it will continue to work. You can run
"ALTER EXTENSION hll UPDATE", but all it will do is update the version
number in the pg_extension table.
## Problem
Once we use async file system APIs for `VirtualFile`, these functions
will also need to be async fn.
## Summary of changes
Makes the functions `open, open_with_options, create,sync_all,with_file`
of `VirtualFile` async fn, including all functions that call it. Like in
the prior PRs, the actual I/O operations are not using async APIs yet,
as per request in the #4743 epic.
We switch towards not using `VirtualFile` in the par_fsync module,
hopefully this is only temporary until we can actually do fully async
I/O in `VirtualFile`. This might cause us to exhaust fd limits in the
tests, but it should only be an issue for the local developer as we have
high ulimits in prod.
This PR is a follow-up of #5189, #5190, #5195, and #5203. Part of #4743.
It's a good idea to keep up-to-date in general. One noteworthy change is
that PostGIS 3.3.3 adds support for PostgreSQL v16. We'll need that.
PostGIS 3.4.0 has already been released, and we should consider
upgrading to that. However, it's a major upgrade and requires running
"SELECT postgis_extensions_upgrade();" in each database, to upgrade the
catalogs. I don't want to deal with that right now.
## Problem
We likely need this to support Postgres 16
It's also been asked by a user
https://github.com/neondatabase/neon/discussions/5042
The latest version is 3.2.0, but it requires some changes in the build
script (which I haven't checked, but it didn't work right away)
## Summary of changes
```
3.1.8 2023-08-01
- force v8 to compile in release mode
3.1.7 2023-06-26
- fix byteoffset issue with arraybuffers
- support postgres 16 beta
3.1.6 2023-04-08
- fix crash issue on fetch apply
- fix interrupt issue
```
From https://github.com/plv8/plv8/blob/v3.1.8/Changes
## Problem
We've got `approved-for-ci-run` to work 🎉
But it's still a bit rough, this PR should improve the UX for external
contributors.
## Summary of changes
- `build_and_test.yml`: add `check-permissions` job, which fails if PR is
created from a fork. Make all jobs in the workflow to be dependant on
`check-permission` to fail fast
- `approved-for-ci-run.yml`: add `cleanup` job to close `ci-run/pr-*`
PRs and delete linked branches when the parent PR is closed
- `approved-for-ci-run.yml`: fix the layout for the `ci-run/pr-*` PR
description
- GitHub Autocomment: add a comment with tests result to the original PR
(instead of a PR from `ci-run/pr-*` )
Add a `walreceiver_state` field to `TimelineInfo` (response of `GET /v1/tenant/:tenant_id/timeline/:timeline_id`) and while doing that, refactor out a common `Timeline::walreceiver_state(..)`. No OpenAPI changes, because this is an internal debugging addition.
Fixes#3115.
Co-authored-by: Joonas Koivunen <joonas.koivunen@gmail.com>
It was easy to interpret comment in the page cache initialization code
to be about justifying why we leak here at all, not just why this
specific type of leaking is done (which the comment was actually meant
to describe).
See
https://github.com/neondatabase/neon/pull/5125#discussion_r1308445993
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
- `SCALE: unbound variable` from
https://github.com/neondatabase/neon/pull/5079
- The layout of the GitHub auto-comment is broken if the code coverage
section follows flaky test section from
https://github.com/neondatabase/neon/pull/4999
## Summary of changes
- `benchmarking.yml`: Rename `SCALE` to `TEST_OLAP_SCALE`
- `comment-test-report.js`: Add an extra new-line before Code coverage
section
## Problem
When the next release is coming, we want to let everyone know about it by
posting a message to the Slack channel with a list of commits.
## Summary of changes
- `.github/workflows/release-notify.yml` is added
- the workflow sends a message to
`vars.SLACK_UPCOMING_RELEASE_CHANNEL_ID` (or
[#test-release-notifications](https://neondb.slack.com/archives/C05QQ9J1BRC)
if not configured)
- On each PR update, the workflow updates the list of commits in the
message (it doesn't send additional messages)
## Problem
We want to convert the `VirtualFile` APIs to async fn so that we can
adopt one of the async I/O solutions.
## Summary of changes
This PR is a follow-up of #5189, #5190, and #5195, and does the
following:
* Move the used `Write` trait functions of `VirtualFile` into inherent
functions
* Add optional buffering to `WriteBlobWriter`. The buffer is discarded
on drop, similarly to how tokio's `BufWriter` does it: drop is neither
async nor does it support errors.
* Remove the generics by `Write` impl of `WriteBlobWriter`, alwaays
using `VirtualFile`
* Rename `WriteBlobWriter` to `BlobWriter`
* Make various functions in the write path async, like
`VirtualFile::{write,write_all}`.
Part of #4743.
## Problem
`CI_ACCESS_TOKEN` has quite limited access (which is good), but this
doesn't allow it to remove labels from PRs (which is bad)
## Summary of changes
- Use `GITHUB_TOKEN` to remove labels
- Use `CI_ACCESS_TOKEN` to create PRs
## Problem
- #5050
Closes: https://github.com/neondatabase/neon/issues/5136
## Summary of changes
- A new configuration property `control_plane_api` controls other
functionality in this PR: if it is unset (default) then everything still
works as it does today.
- If `control_plane_api` is set, then on startup we call out to control
plane `/re-attach` endpoint to discover our attachments and their
generations. If an attachment is missing from the response we implicitly
detach the tenant.
- Calls to pageserver `/attach` API may include a `generation`
parameter. If `control_plane_api` is set, then this parameter is
mandatory.
- RemoteTimelineClient's loading of index_part.json is generation-aware,
and will try to load the index_part with the most recent generation <=
its own generation.
- The `neon_local` testing environment now includes a new binary
`attachment_service` which implements the endpoints that the pageserver
requires to operate. This is on by default if running `cargo neon` by
hand. In `test_runner/` tests, it is off by default: existing tests
continue to run with in the legacy generation-less mode.
Caveats:
- The re-attachment during startup assumes that we are only re-attaching
tenants that have previously been attached, and not totally new tenants
-- this relies on the control plane's attachment logic to keep retrying
so that we should eventually see the attach API call. That's important
because the `/re-attach` API doesn't tell us which timelines we should
attach -- we still use local disk state for that. Ref:
https://github.com/neondatabase/neon/issues/5173
- Testing: generations are only enabled for one integration test right
now (test_pageserver_restart), as a smoke test that all the machinery
basically works. Writing fuller tests that stress tenant migration will
come later, and involve extending our test fixtures to deal with
multiple pageservers.
- I'm not in love with "attachment_service" as a name for the neon_local
component, but it's not very important because we can easily rename
these test bits whenever we want.
- Limited observability when in re-attach on startup: when I add
generation validation for deletions in a later PR, I want to wrap up the
control plane API calls in some small client class that will expose
metrics for things like errors calling the control plane API, which will
act as a strong red signal that something is not right.
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
Pull Requests created by GitHub Actions bot doesn't have access to
secrets, so we need to use our bot for it to auto-trigger a tests run
See previous PRs #4663, #5210, #5212
## Summary of changes
- Use our bot to create PRs
## Problem
- Scrubber's `tidy` command requires presence of a control plane
- Scrubber has no tests at all
## Summary of changes
- Add re-usable async streams for reading metadata from a bucket
- Add a `scan-metadata` command that reads from those streams and calls
existing `checks.rs` code to validate metadata, then returns a summary
struct for the bucket. Command returns nonzero status if errors are
found.
- Add an `enable_scrub_on_exit()` function to NeonEnvBuilder so that
tests using remote storage can request to have the scrubber run after
they finish
- Enable remote storarge and scrub_on_exit in test_pageserver_restart
and test_pageserver_chaos
This is a "toe in the water" of the overall space of validating the
scrubber. Later, we should:
- Enable scrubbing at end of tests using remote storage by default
- Make the success condition stricter than "no errors": tests should
declare what tenants+timelines they expect to see in the bucket (or
sniff these from the functions tests use to create them) and we should
require that the scrubber reports on these particular tenants/timelines.
The `tidy` command is untouched in this PR, but it should be refactored
later to use similar async streaming interface instead of the current
batch-reading approach (the streams are faster with large buckets), and
to also be covered by some tests.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Conrad Ludgate <conrad@neon.tech>
## Problem
It's hard to find out which DB size we use for OLAP benchmarks (TPC-H in
particular).
This PR adds handling of `TEST_OLAP_SCALE` env var, which is get added
to a test name as a parameter.
This is required for performing larger periodic benchmarks.
## Summary of changes
- Handle `TEST_OLAP_SCALE` in
`test_runner/performance/test_perf_olap.py`
- Set `TEST_OLAP_SCALE` in `.github/workflows/benchmarking.yml` to a
TPC-H scale
Fixes#3830 by adding the `#[cfg(not(feature = "testing"))]` attribute
to unnecessary loggings in `pageserver/src/tenant/tasks.rs`.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
Continuation of #4663, #5210
We're still getting an error:
```
GraphQL: Resource not accessible by integration (removeLabelsFromLabelable)
```
## Summary of changes
- trigger `approved-for-ci-run.yml` workflow on `pull_request_target`
instead of `pull_request`
Fix issue where updating the size of the Local File Cache could lead to
invalid reads:
## Problem
LFC cache can get re-enabled when lfc_max_size is set, e.g. through an
autoscaler configuration, or PostgreSQL not liking us setting the
variable.
1. initialize: LFC enabled (lfc_size_limit > 0; lfc_desc = 0)
2. Open LFC file fails, lfc_desc = -1. lfc_size_limit is set to 0;
3. lfc_size_limit is updated by autoscaling to >0
4. read() now thinks LFC is enabled (size_limit > 0) and lfc_desc is
valid, but doesn't try to read from the invalid file handle and thus
doesn't update the buffer content with the page's data, but does think
the data was read...
Any buffer we try to read from local file cache is essentially
uninitialized memory. Those are likely 0-bytes, but might potentially be
any old buffer that was previously read from or flushed to disk.
Fix this by adding a more definitive disable flag, plus better invalid state handling.
## Problem
When a remote custom extension build fails, it looks a bit confusing on
neon CI:
- `trigger-custom-extensions-build` is green
- `wait-for-extensions-build` is red
- `build-and-upload-extensions` is red
But to restart the build (to get everything green), you need to restart
the only passed `trigger-custom-extensions-build`.
## Summary of changes
- Merge `trigger-custom-extensions-build` and
`wait-for-extensions-build` jobs into
`trigger-custom-extensions-build-and-wait`
## Problem
We want to convert the `VirtualFile` APIs to async fn so that we can
adopt one of the async I/O solutions.
## Summary of changes
Convert the following APIs of `VirtualFile` to async fn (as well as all
of the APIs calling it):
* `VirtualFile::seek`
* `VirtualFile::metadata`
* Also, prepare for deletion of the write impl by writing the summary to
a buffer before writing it to disk, as suggested in
https://github.com/neondatabase/neon/issues/4743#issuecomment-1700663864
. This change adds an additional warning for the case when the summary
exceeds a block. Previously, we'd have silently corrupted data in this
(unlikely) case.
* `WriteBlobWriter::write_blob`, in preparation for making
`VirtualFile::write_all` async.
A set of changes to enable neon to work in IPv6 environments. The
changes are backward-compatible but allow to deploy neon even to
IPv6-only environments:
- bind to both IPv4 and IPv6 interfaces
- allow connections to Postgres from IPv6 interface
- parse the address from control plane that could also be IPv6
## Problem
`VirtualFile` does both reading and writing, and it would be nice if
both could be converted to async, so that it doesn't have to support an
async read path and a blocking write path (especially for the locks this
is annoying as none of the lock implementations in std, tokio or
parking_lot have support for both async and blocking access).
## Summary of changes
This PR is some initial work on making the `VirtualFile` APIs async. It
can be reviewed commit-by-commit.
* Introduce the `MaybeVirtualFile` enum to be generic in a test that
compares real files with virtual files.
* Make various APIs of `VirtualFile` async, including `write_all_at`,
`read_at`, `read_exact_at`.
Part of #4743 , successor of #5180.
Co-authored-by: Christian Schwarz <me@cschwarz.com>
## Problem
The `VirtualFile::crashsafe_overwrite` function was introduced by #5186
but it was not turned `async fn` yet. We want to make these functions
async fn as part of #4743.
## Summary of changes
Make `VirtualFile::crashsafe_overwrite` async fn, as well as all the
functions calling it. Don't make anything inside `crashsafe_overwrite`
use async functionalities, as per #4743 instructions.
Also, add rustdoc to `crashsafe_overwrite`.
Part of #4743.
## Problem
If a pageserver crashes partway through deleting a tenant's directory,
it might leave a partial state that confuses a subsequent
startup/attach.
## Summary of changes
Rename tenant directory to a temporary path before deleting.
Timeline deletions already have deletion markers to provide safety.
In future, it would be nice to exploit this to send responses to detach
requests earlier: https://github.com/neondatabase/neon/issues/5183
(part of #4743)
(preliminary to #5180)
This PR adds a special-purpose API to `VirtualFile` for write-once
files.
It adopts it for `save_metadata` and `persist_tenant_conf`.
This is helpful for the asyncification efforts (#4743) and specifically
asyncification of `VirtualFile` because above two functions were the
only ones that needed the VirtualFile to be an `std::io::Write`.
(There was also `manifest.rs` that needed the `std::io::Write`, but, it
isn't used right now, and likely won't be used because we're taking a
different route for crash consistency, see #5172. So, let's remove it.
It'll be in Git history if we need to re-introduce it when picking up
the compaction work again; that's why it was introduced in the first
place).
We can't remove the `impl std::io::Write for VirtualFile` just yet
because of the `BufWriter` in
```rust
struct DeltaLayerWriterInner {
...
blob_writer: WriteBlobWriter<BufWriter<VirtualFile>>,
}
```
But, @arpad-m and I have a plan to get rid of that by extracting the
append-only-ness-on-top-of-VirtualFile that #4994 added to
`EphemeralFile` into an abstraction that can be re-used in the
`DeltaLayerWriterInner` and `ImageLayerWriterInner`.
That'll be another PR.
### Performance Impact
This PR adds more fsyncs compared to before because we fsync the parent
directory every time.
1. For `save_metadata`, the additional fsyncs are unnecessary because we
know that `metadata` fits into a kernel page, and hence the write won't
be torn on the way into the kernel. However, the `metadata` file in
general is going to lose signficance very soon (=> see #5172), and the
NVMes in prod can definitely handle the additional fsync. So, let's not
worry about it.
2. For `persist_tenant_conf`, which we don't check to fit into a single
kernel page, this PR makes it actually crash-consistent. Before, we
could crash while writing out the tenant conf, leaving a prefix of the
tenant conf on disk.
## Problem
Tests using remote storage have manually entered `test_name` parameters,
which:
- Are easy to accidentally duplicate when copying code to make a new
test
- Omit parameters, so don't actually create unique S3 buckets when
running many tests concurrently.
## Summary of changes
- Use the `request` fixture in neon_env_builder fixture to get the test
name, then munge that into an S3 compatible bucket name.
- Remove the explicit `test_name` parameters to enable_remote_storage
For
[#5086](https://github.com/neondatabase/neon/pull/5086#issuecomment-1701331777)
we will require remote storage to be configured in pageserver.
This PR enables `localfs`-based storage for all Rust unit tests.
Changes:
- In `TenantHarness`, set up localfs remote storage for the tenant.
- `create_test_timeline` should mimic what real timeline creation does,
and real timeline creation waits for the timeline to reach remote
storage. With this PR, `create_test_timeline` now does that as well.
- All the places that create the harness tenant twice need to shut down
the tenant before the re-create through a second call to `try_load` or
`load`.
- Without shutting down, upload tasks initiated by/through the first
incarnation of the harness tenant might still be ongoing when the second
incarnation of the harness tenant is `try_load`/`load`ed. That doesn't
make sense in the tests that do that, they generally try to set up a
scenario similar to pageserver stop & start.
- There was one test that recreates a timeline, not the tenant. For that
case, I needed to create a `Timeline::shutdown` method. It's a
refactoring of the existing `Tenant::shutdown` method.
- The remote_timeline_client tests previously set up their own
`GenericRemoteStorage` and `RemoteTimelineClient`. Now they re-use the
one that's pre-created by the TenantHarness. Some adjustments to the
assertions were needed because the assertions now need to account for
the initial image layer that's created by `create_test_timeline` to be
present.
This RFC describes a simple scheme to make layer map updates crash
consistent by leveraging the index_part.json in remote storage. Without
such a mechanism, crashes can induce certain edge cases in which broadly
held assumptions about system invariants don't hold.
The `remote_timeline_client` tests use `#[tokio::test]` and rely on the
fact that the test runtime that is set up by this macro is
single-threaded.
In PR https://github.com/neondatabase/neon/pull/5164, we observed
interesting flakiness with the `upload_scheduling` test case:
it would observe the upload of the third layer (`layer_file_name_3`)
before we did `wait_completion`.
Under the single-threaded-runtime assumption, that wouldn't be possible,
because the test code doesn't await inbetween scheduling the upload
and calling `wait_completion`.
However, RemoteTimelineClient was actually using `BACKGROUND_RUNTIME`.
That means there was parallelism where the tests didn't expect it,
leading to flakiness such as execution of an UploadOp task before
the test calls `wait_completion`.
The most confusing scenario is code like this:
```
schedule upload(A);
wait_completion.await; // B
schedule_upload(C);
wait_completion.await; // D
```
On a single-threaded executor, it is guaranteed that the upload up C
doesn't run before D, because we (the test) don't relinquish control
to the executor before D's `await` point.
However, RemoteTimelineClient actually scheduled onto the
BACKGROUND_RUNTIME, so, `A` could start running before `B` and
`C` could start running before `D`.
This would cause flaky tests when making assertions about the state
manipulated by the operations. The concrete issue that led to discover
of this bug was an assertion about `remote_fs_dir` state in #5164.
## Problem
Currently, the `deploy` job doesn't wait for the custom extension job
(in another repo) and can be started even with failed extensions build.
This PR adds another job that polls the status of the extension build job
and fails if the extension build fails.
## Summary of changes
- Add `wait-for-extensions-build` job, which waits for a custom
extension build in another repo.
## Problem
- https://github.com/neondatabase/neon/issues/5167
## Summary of changes
Accept "will not become active" log line with _either_ Broken or
Stopping state, because we may hit it while in the process of doing the
`/ignore` (earlier in the test than the test expects to see the same
line with Broken)
## Problem
The S3 scrubber currently lives at
https://github.com/neondatabase/s3-scrubber
We don't have tests that use it, and it has copies of some data
structures that can get stale.
## Summary of changes
- Import the s3-scrubber as `s3_scrubber/
- Replace copied_definitions/ in the scrubber with direct access to the
`utils` and `pageserver` crates
- Modify visibility of a few definitions in `pageserver` to allow the
scrubber to use them
- Update scrubber code for recent changes to `IndexPart`
- Update `KNOWN_VERSIONS` for IndexPart and move the definition into
index.rs so that it is easier to keep up to date
As a future refinement, it would be good to pull the remote persistence
types (like IndexPart) out of `pageserver` into a separate library so
that the scrubber doesn't have to link against the whole pageserver, and
so that it's clearer which types need to be public.
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
Test failing on a different ERROR log than it anticipated.
Closes: https://github.com/neondatabase/neon/issues/5148
## Summary of changes
Add the "could not flush frozen layer" error log to the permitted
errors.
## Problem
To implement split brain protection, we need tenants and timelines to be
aware of their current generation, and use it when composing S3 keys.
## Summary of changes
- A `Generation` type is introduced in the `utils` crate -- it is in
this broadly-visible location because it will later be used from
`control_plane/` as well as `pageserver/`. Generations can be a number,
None, or Broken, to support legacy content (None), and Tenants in the
broken state (Broken).
- Tenant, Timeline, and RemoteTimelineClient all get a generation
attribute
- IndexPart's IndexLayerMetadata has a new `generation` attribute.
Legacy layers' metadata will deserialize to Generation::none().
- Remote paths are composed with a trailing generation suffix. If a
generation is equal to Generation::none() (as it currently always is),
then this suffix is an empty string.
- Functions for composing remote storage paths added in
remote_timeline_client: these avoid the way that we currently always
compose a local path and then strip the prefix, and avoid requiring a
PageserverConf reference on functions that want to create remote paths
(the conf is only needed for local paths). These are less DRY than the
old functions, but remote storage paths are a very rarely changing
thing, so it's better to write out our paths clearly in the functions
than to compose timeline paths from tenant paths, etc.
- Code paths that construct a Tenant take a `generation` argument in
anticipation that we will soon load generations on startup before
constructing Tenant.
Until the whole feature is done, we don't want any generation-ful keys
though: so initially we will carry this everywhere with the special
Generation::none() value.
Closes: https://github.com/neondatabase/neon/issues/5135
Co-authored-by: Christian Schwarz <christian@neon.tech>
I've moved it to the API handler in the 589cf1ed2 to do not delay
compute start. Yet, we now skip full configuration and catalog updates
in the most hot path -- waking up suspended compute, and only do it at:
- first start
- start with applying new configuration
- start for availability check
so it doesn't really matter anymore.
The problem with creating the table and test record in the API handler
is that someone can fill up timeline till the logical limit. Then it's
suspended and availability check is scheduled, so it fails.
If table + test row are created at the very beginning, we reserve a 8 KB
page for future checks, which theoretically will last almost forever.
For example, my ~1y old branch still has 8 KB sized test table:
```sql
cloud_admin@postgres=# select pg_relation_size('health_check');
pg_relation_size
------------------
8192
(1 row)
```
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
## Problem
`timeline_layers` was write-only since
b95addddd5
We deployed the version that no longer requires it for deserializing, so
now we can stop including it when serializing.
## Summary of changes
Fully remove `timeline_layers`.
In logs it is confusing to see seqwait timeouts which seemingly arise
from the branched lsn but actually are about the ancestor, leading to
questions like "has the last_record_lsn went back".
Noticed by @problame.
## Summary
A scheme of logical "generation numbers" for pageservers and their
attachments is proposed, along with
changes to the remote storage format to include these generation numbers
in S3 keys.
Using the control plane as the issuer of these generation numbers
enables strong anti-split-brain
properties in the pageserver cluster without implementing a consensus
mechanism directly
in the pageservers.
## Motivation
Currently, the pageserver's remote storage format does not provide a
mechanism for addressing
split brain conditions that may happen when replacing a node during
failover or when migrating
a tenant from one pageserver to another. From a remote storage
perspective, a split brain condition
occurs whenever two nodes both think they have the same tenant attached,
and both can write to S3. This
can happen in the case of a network partition, pathologically long
delays (e.g. suspended VM), or software
bugs.
This blocks robust implementation of failover from unresponsive
pageservers, due to the risk that
the unresponsive pageserver is still writing to S3.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
`read_blk` does I/O and thus we would like to make it async. We can't
make the function async as long as the `PageReadGuard` returned by
`read_blk` isn't `Send`. The page cache is called by `read_blk`, and
thus it can't be async without `read_blk` being async. Thus, we have a
circular dependency.
## Summary of changes
Due to the circular dependency, we convert both the page cache and
`read_blk` to async at the same time:
We make the page cache use `tokio::sync` synchronization primitives as
those are `Send`. This makes all the places that acquire a lock require
async though, which we then also do. This includes also asyncification
of the `read_blk` function.
Builds upon #4994, #5015, #5056, and #5129.
Part of #4743.
Instead of fixed during the start of replication. To this end, create
term_flush_lsn watch channel similar to commit_lsn one. This allows to continue
recovery streaming if new data appears.
Slightly refactors init: now load_tenant_timelines is also async to properly
init the timeline, but to keep global map lock sync we just acquire it anew for
each timeline.
Recovery task itself is just a stub here.
part of
https://github.com/neondatabase/neon/pull/4875
Part 1 of 2, for moving the file cache onto disk.
Because VMs are created by the control plane (and that's where the
filesystem for the file cache is defined), we can't rely on any kind of
synchronization between releases, so the change needs to be
feature-gated (kind of), with the default remaining the same for now.
See also: neondatabase/cloud#6593
## Problem
We still need to rerun some builds manually because flaky tests weren't
detected automatically.
I found two reasons for it:
- If a test is flaky on a particular build type, on a particular
Postgres version, there's a high chance that this test is flaky on all
configurations, but we don't automatically detect such cases.
- We detect flaky tests only on the main branch, which requires manual
retrigger runs for freshly made flaky tests.
Both of them are fixed in the PR.
## Summary of changes
- Spread flakiness of a single test to all configurations
- Detect flaky tests in all branches (not only in the main)
- Look back only at 7 days of test history (instead of 10)
## Problem
I saw these things while working on #5111.
## Summary of changes
* Add a comment explaining why we use `Vec::leak` instead of
`Vec::into_boxed_slice` plus `Box::leak`.
* Add another comment explaining what `valid` is doing, it wasn't very
clear before.
* Add a function `set_usage_count` to not set it directly.
Before this patch, when dropping an EphemeralFile, we'd scan the entire
`slots` to proactively evict its pages (`drop_buffers_for_immutable`).
This was _necessary_ before #4994 because the page cache was a
write-back cache: we'd be deleting the EphemeralFile from disk after,
so, if we hadn't evicted its pages before that, write-back in
`find_victim` wouldhave failed.
But, since #4994, the page cache is a read-only cache, so, it's safe
to keep read-only data cached. It's never going to get accessed again
and eventually, `find_victim` will evict it.
The only remaining advantage of `drop_buffers_for_immutable` over
relying on `find_victim` is that `find_victim` has to do the clock
page replacement iterations until the count reaches 0,
whereas `drop_buffers_for_immutable` can kick the page out right away.
However, weigh that against the cost of `drop_buffers_for_immutable`,
which currently scans the entire `slots` array to find the
EphemeralFile's pages.
Alternatives have been proposed in #5122 and #5128, but, they come
with their own overheads & trade-offs.
Also, the real reason why we're looking into this piece of code is
that we want to make the slots rwlock async in #5023.
Since `drop_buffers_for_immutable` is called from drop, and there
is no async drop, it would be nice to not have to deal with this.
So, let's just stop doing `drop_buffers_for_immutable` and observe
the performance impact in benchmarks.
Unrelated fixes noticed while integrating #4938.
- Stop leaking future layers in remote storage
- We schedule extra index_part uploads if layer name to be removed was
not actually present
Starts `postgres` in cgroup directly from `compute_ctl` instead of from
`vm-builder`. This is required because the `vm-monitor` cannot be in the
cgroup it is managing. Otherwise, it itself would be frozen when
freezing the cgroup.
Requires https://github.com/neondatabase/cloud/pull/6331, which adds the
`AUTOSCALING` environment variable letting `compute_ctl` know to start
`postgres` in the cgroup.
Requires https://github.com/neondatabase/autoscaling/pull/468, which
prevents `vm-builder` from starting the monitor and putting postgres in
a cgroup. This will require a `VM_BUILDER_VERSION` bump.
## Problem
The `metadata_bytes` field of IndexPart required explicit
deserialization & error checking everywhere it was used -- there isn't
anything special about this structure that should prevent it from being
serialized & deserialized along with the rest of the structure.
## Summary of changes
- Implement Serialize and Deserialize for TimelineMetadata
- Replace IndexPart::metadata_bytes with a simpler `metadata`, that can
be used directly.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
We were returning Pending when a connection had a notice/notification
(introduced recently in #5020). When returning pending, the runtime
assumes you will call `cx.waker().wake()` in order to continue
processing.
We weren't doing that, so the connection task would get stuck
## Summary of changes
Don't return pending. Loop instead
## Problem
We want to make `read_blk` an async function, but outside of
`async_trait`, which allocates, and nightly features, we can't use async
fn's in traits.
## Summary of changes
* Remove all uses of `BlockReader::read_blk` in favour of using block
cursors, at least where the type of the `BlockReader` is behind a
generic
* Introduce a `BlockReaderRef` enum that lists all implementors of
`BlockReader::read_blk`.
* Remove `BlockReader::read_blk` and move its implementations into
inherent functions on the types instead.
We don't turn `read_blk` into an async fn yet, for that we also need to
modify the page cache. So this is a preparatory PR, albeit an important
one.
Part of #4743.
## Problem
The previous arguments have the monitor listen on `localhost`, which the
informant can connect to since it's also in the VM, but which the agent
cannot. Also, the port is wrong.
## Summary of changes
Listen on `0.0.0.0:10301`
## Problem
The `EphemeralFile::write_blob` function accesses the page cache
internally. We want to require `async` for these accesses in #5023.
## Summary of changes
This removes the implementaiton of the `BlobWriter` trait for
`EphemeralFile` and turns the `write_blob` function into an inherent
function. We can then make it async as well as the `push_bytes`
function. We move the `SER_BUFFER` thread-local into the
`InMemoryLayerInner` so that the same buffer can be accessed by
different threads as the async is (potentially) moved between threads.
Part of #4743, preparation for #5023.
Current implementation first calls `load_layer_map`, which loads all
local layers, cleans up files, leave cleaning up stuff to "second
function". Then the "second function" is finally called, it does not do
the cleanup and some of the first functions setup can torn down. "Second
function" is actually both `reconcile_with_remote` and
`create_remote_layers`.
This change makes it a bit more verbose but in one phase with the
following sub-steps:
1. scan the timeline directory
2. delete extra files
- now including on-demand download files
- fixes#3660
3. recoincile the two sources of layers (directory, index_part)
4. rename_to_backup future layers, short layers
5. create the remaining as layers
Needed by #4938.
It was also noticed that this is blocking code in an `async fn` so just
do it in a `spawn_blocking`, which should be healthy for our startup
times. Other effects includes hopefully halving of `stat` calls; extra
calls which were not done previously are now done for the future layers.
Co-authored-by: Christian Schwarz <christian@neon.tech>
Co-authored-by: John Spray <john@neon.tech>
## Problem
Currently, anything that uses backoff::retry will delay the join of its
task by however long its backoff sleep is, multiplied by its max
retries.
Whenever we call a function that sleeps, we should be passing in a
CancellationToken.
## Summary of changes
- Add a `Cancel` type to backoff::retry that wraps a CancellationToken
and an error `Fn` to generate an error if the cancellation token fires.
- In call sites that already run in a `task_mgr` task, use
`shutdown_token()` to provide the token. In other locations, use a dead
`CancellationToken` to satisfy the interface, and leave a TODO to fix it
up when we broaden the use of explicit cancellation tokens.
This is cherry-picked-then-improved version of release branch commit
4204960942 PR #4861)
The commit
commit 5f8fd640bf
Author: Alek Westover <alek.westover@gmail.com>
Date: Wed Jul 26 08:24:03 2023 -0400
Upload Test Remote Extensions (#4792)
switched to using the release tag instead of `latest`, but,
the `promote-images` job only uploads `latest` to the prod ECR.
The switch to using release tag was good in principle, but,
it broke the release pipeline. So, switch release pipeline
back to using `latest`.
Note that a proper fix should abandon use of `:latest` tag
at all: currently, if a `main` pipeline runs concurrently
with a `release` pipeline, the `release` pipeline may end
up using the `main` pipeline's images.
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Accidentially giving is_incremental=true for ImageLayers costs a lot of
debugging time. Removes all API which would allow to do that. They can
easily be restored later *when needed*.
Split off from #4938.
When doing global queries in VictoriaMetrics, the per-timeline
histograms make us run into cardinality limits.
We don't want to give them up just yet because we don't
have an alternative for drilling down on timeline-specific
performance issues.
So, add a pre-aggregated histogram and add observations to it
whenever we add observations to the per-timeline histogram.
While we're at it, switch to using a strummed enum for the operation
type names.
#4938 will make on-demand download of layers in compaction possible, so
it's not suitable for our "policy" of no `spawn_blocking(|| ...
Handle::block_on(async { spawn_blocking(...).await })` because this
poses a clear deadlock risk. Nested spawn_blockings are because of the
download using `tokio::fs::File`.
- Remove `spawn_blocking` from caller of `compact_level0_phase1`
- Remove `Handle::block_on` from `compact_level0_phase1` (indentation
change)
- Revert to `AsLayerDesc::layer_desc` usage temporarily (until it
becomes field access in #4938)
## Problem
many duplicate windows crates pollute the cargo deny output
## Summary of changes
we don't build those crates, so remove those targets from being checked
## Problem
cargo deny lint broken
Links to the CVEs:
[rustsec.org/advisories/RUSTSEC-2023-0052](https://rustsec.org/advisories/RUSTSEC-2023-0052)
[rustsec.org/advisories/RUSTSEC-2023-0053](https://rustsec.org/advisories/RUSTSEC-2023-0053)
One is fixed, the other one isn't so we allow it (for now), to unbreak
CI. Then later we'll try to get rid of webpki in favour of the rustls
fork.
## Summary of changes
```
+ignore = ["RUSTSEC-2023-0052"]
```
## Problem
There are some common types that we pass into tenants and timelines as
we construct them, such as remote storage and the broker client.
Currently the list is small, but this is likely to grow -- the deletion
queue PR (#4960) pushed some methods to the point of clippy complaining
they had too many args, because of the extra deletion queue client being
passed around.
There are some shared objects that currently aren't passed around
explicitly because they use a static `once_cell` (e.g.
CONCURRENT_COMPACTIONS), but as we add more resource management and
concurreny control over time, it will be more readable & testable to
pass a type around in the respective Resources object, rather than to
coordinate via static objects. The `Resources` structures in this PR
will make it easier to add references to central coordination functions,
without having to rely on statics.
## Summary of changes
- For `Tenant`, the `broker_client` and `remote_storage` are bundled
into `TenantSharedResources`
- For `Timeline`, the `remote_client` is wrapped into
`TimelineResources`.
Both of these structures will get an additional deletion queue member in
#4960.
## Problem
IndexPart contains two redundant lists of layer names: a set of the
names, and then a map of name to metadata.
We already required that all the layers in `timeline_layers` are also in
`layers_metadata`, in `initialize_with_current_remote_index_part`, so if
there were any index_part.json files in the field that relied on these
sets being different, they would already be broken.
## Summary of changes
`timeline_layers` is made private and no longer read at runtime. It is
still serialized, but not deserialized.
`disk_consistent_lsn` is also made private, as this field only exists
for convenience of humans reading the serialized JSON.
This prepares us to entirely remove `timeline_layers` in a future
release, once this change is fully deployed, and therefore no
pageservers are trying to read the field.
I made a mistake when I adding `env.initial_timeline:
Optional[TimelineId]` in the #3839, should had just generated it and
used it to create a specific timeline. This PR fixes those mistakes, and
some extra calling into psql which must be slower than python field
access.
I'm still a bit nervous about attach -> crash case. But it should work.
(unlike case with timeline). Ideally would be cool to cover this with
test.
This continues tradition of adding bool flags for Tenant::set_stopping.
Probably lifecycle project will help with fixing it.
## Problem
Before, DeltaLayer dumping (via `cargo run --release -p pagectl --
print-layer-file` ) would crash as one can't call `Handle::block_on` in
an async executor thread.
## Summary of changes
Avoid the problem by using `DeltaLayerInner::load_keys` to load the keys
into RAM (which we already do during compaction), and then load the
values one by one during dumping.
- move them to pageserver which is the only dependant on the crate fail
- "move" the exported macro to the new module
- support at init time the same failpoints as runtime
Found while debugging test failures and making tests more repeatable by
allowing "exit" from pageserver start via environment variables. Made
those changes to `test_gc_cutoff.py`.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
A very slight change that allows us to configure the UID of the
neon-postgres cgroup owner. We start postgres in this cgroup so we can
scale it with the cgroups v2 api. Currently, the control plane
overwrites the entrypoint set by `vm-builder`, so `compute_ctl` (and
thus postgres), is not started in the neon-postgres cgroup. Having
`compute_ctl` start postgres in the cgroup should fix this. However, at
the moment appears like it does not have the correct permissions.
Configuring the neon-postgres UID to `postgres` (which is the UID
`compute_ctl` runs under) should hopefully fix this.
See #4920 - the PR to modify `compute_ctl` to start postgres in the
cgorup.
See: neondatabase/autoscaling#480, neondatabase/autoscaling#477. Both
these PR's are part of an effort to increase `vm-builder`'s
configurability and allow us to adjust it as we integrate in the
monitor.
(This PR is the successor of https://github.com/neondatabase/neon/pull/4984 )
## Summary
The current way in which `EphemeralFile` uses `PageCache` complicates
the Pageserver code base to a degree that isn't worth it.
This PR refactors how we cache `EphemeralFile` contents, by exploiting
the append-only nature of `EphemeralFile`.
The result is that `PageCache` only holds `ImmutableFilePage` and
`MaterializedPage`.
These types of pages are read-only and evictable without write-back.
This allows us to remove the writeback code from `PageCache`, also
eliminating an entire failure mode.
Futher, many great open-source libraries exist to solve the problem of a
read-only cache,
much better than our `page_cache.rs` (e.g., better replacement policy,
less global locking).
With this PR, we can now explore using them.
## Problem & Analysis
Before this PR, `PageCache` had three types of pages:
* `ImmutableFilePage`: caches Delta / Image layer file contents
* `MaterializedPage`: caches results of Timeline::get (page
materialization)
* `EphemeralPage`: caches `EphemeralFile` contents
`EphemeralPage` is quite different from `ImmutableFilePage` and
`MaterializedPage`:
* Immutable and materialized pages are for the acceleration of (future)
reads of the same data using `PAGE_CACHE_SIZE * PAGE_SIZE` bytes of
DRAM.
* Ephemeral pages are a write-back cache of `EphemeralFile` contents,
i.e., if there is pressure in the page cache, we spill `EphemeralFile`
contents to disk.
`EphemeralFile` is only used by `InMemoryLayer`, for the following
purposes:
* **write**: when filling up the `InMemoryLayer`, via `impl BlobWriter
for EphemeralFile`
* **read**: when doing **page reconstruction** for a page@lsn that isn't
written to disk
* **read**: when writing L0 layer files, we re-read the `InMemoryLayer`
and put the contents into the L0 delta writer
(**`create_delta_layer`**). This happens every 10min or when
InMemoryLayer reaches 256MB in size.
The access patterns of the `InMemoryLayer` use case are as follows:
* **write**: via `BlobWriter`, strictly append-only
* **read for page reconstruction**: via `BlobReader`, random
* **read for `create_delta_layer`**: via `BlobReader`, dependent on
data, but generally random. Why?
* in classical LSM terms, this function is what writes the
memory-resident `C0` tree into the disk-resident `C1` tree
* in our system, though, the values of InMemoryLayer are stored in an
EphemeralFile, and hence they are not guaranteed to be memory-resident
* the function reads `Value`s in `Key, LSN` order, which is `!=` insert
order
What do these `EphemeralFile`-level access patterns mean for the page
cache?
* **write**:
* the common case is that `Value` is a WAL record, and if it isn't a
full-page-image WAL record, then it's smaller than `PAGE_SIZE`
* So, the `EphemeralPage` pages act as a buffer for these `< PAGE_CACHE`
sized writes.
* If there's no page cache eviction between subsequent
`InMemoryLayer::put_value` calls, the `EphemeralPage` is still resident,
so the page cache avoids doing a `write` system call.
* In practice, a busy page server will have page cache evictions because
we only configure 64MB of page cache size.
* **reads for page reconstruction**: read acceleration, just as for the
other page types.
* **reads for `create_delta_layer`**:
* The `Value` reads happen through a `BlockCursor`, which optimizes the
case of repeated reads from the same page.
* So, the best case is that subsequent values are located on the same
page; hence `BlockCursor`s buffer is maximally effective.
* The worst case is that each `Value` is on a different page; hence the
`BlockCursor`'s 1-page-sized buffer is ineffective.
* The best case translates into `256MB/PAGE_SIZE` page cache accesses,
one per page.
* the worst case translates into `#Values` page cache accesses
* again, the page cache accesses must be assumed to be random because
the `Value`s aren't accessed in insertion order but `Key, LSN` order.
## Summary of changes
Preliminaries for this PR were:
- #5003
- #5004
- #5005
- uncommitted microbenchmark in #5011
Based on the observations outlined above, this PR makes the following
changes:
* Rip out `EphemeralPage` from `page_cache.rs`
* Move the `block_io::FileId` to `page_cache::FileId`
* Add a `PAGE_SIZE`d buffer to the `EphemeralPage` struct.
It's called `mutable_tail`.
* Change `write_blob` to use `mutable_tail` for the write buffering
instead of a page cache page.
* if `mutable_tail` is full, it writes it out to disk, zeroes it out,
and re-uses it.
* There is explicitly no double-buffering, so that memory allocation per
`EphemeralFile` instance is fixed.
* Change `read_blob` to return different `BlockLease` variants depending
on `blknum`
* for the `blknum` that corresponds to the `mutable_tail`, return a ref
to it
* Rust borrowing rules prevent `write_blob` calls while refs are
outstanding.
* for all non-tail blocks, return a page-cached `ImmutablePage`
* It is safe to page-cache these as ImmutablePage because EphemeralFile
is append-only.
## Performance
How doe the changes above affect performance?
M claim is: not significantly.
* **write path**:
* before this PR, the `EphemeralFile::write_blob` didn't issue its own
`write` system calls.
* If there were enough free pages, it didn't issue *any* `write` system
calls.
* If it had to evict other `EphemeralPage`s to get pages a page for its
writes (`get_buf_for_write`), the page cache code would implicitly issue
the writeback of victim pages as needed.
* With this PR, `EphemeralFile::write_blob` *always* issues *all* of its
*own* `write` system calls.
* Also, the writes are explicit instead of implicit through page cache
write back, which will help #4743
* The perf impact of always doing the writes is the CPU overhead and
syscall latency.
* Before this PR, we might have never issued them if there were enough
free pages.
* We don't issue `fsync` and can expect the writes to only hit the
kernel page cache.
* There is also an advantage in issuing the writes directly: the perf
impact is paid by the tenant that caused the writes, instead of whatever
tenant evicts the `EphemeralPage`.
* **reads for page reconstruction**: no impact.
* The `write_blob` function pre-warms the page cache when it writes the
`mutable_tail` to disk.
* So, the behavior is the same as with the EphemeralPages before this
PR.
* **reads for `create_delta_layer`**: no impact.
* Same argument as for page reconstruction.
* Note for the future:
* going through the page cache likely causes read amplification here.
Why?
* Due to the `Key,Lsn`-ordered access pattern, we don't read all the
values in the page before moving to the next page. In the worst case, we
might read the same page multiple times to read different `Values` from
it.
* So, it might be better to bypass the page cache here.
* Idea drafts:
* bypass PS page cache + prefetch pipeline + iovec-based IO
* bypass PS page cache + use `copy_file_range` to copy from ephemeral
file into the L0 delta file, without going through user space
## Problem
The performance benchmark in `test_runner/performance/test_layer_map.py`
is currently failing due to the warning added in #4888.
## Summary of changes
The test mentioned has a `compaction_target_size` of 8192, which is just
one page size. This is an unattainable goal, as we generate at least
three pages: one for the header, one for the b-tree (minimally sized
ones have just the root node in a single page), one for the data.
Therefore, we add two pages to the warning limit. The warning text
becomes a bit less accurate but I think this is okay.
## Problem
Errors and notices that happen during a pooled connection lifecycle have
no session identifiers
## Summary of changes
Using a watch channel, we set the session ID whenever it changes. This
way we can see the status of a connection for that session
Also, adding a connection id to be able to search the entire connection
lifecycle
I will have to change these as I change remote_timeline_client api in
#4938. So a bit of cleanup, handle my comments which were just resolved
during initial review.
Cleanup:
- use unwrap in tests instead of mixed `?` and `unwrap`
- use `Handle` instead of `&'static Reactor` to make the
RemoteTimelineClient more natural
- use arrays in tests
- use plain `#[tokio::test]`
## Problem
A customer is having trouble connecting to neon from their production
environment. The logs show a mix of "Internal error" and "authentication
protocol violation" but not the full error
## Summary of changes
Make sure we don't miss any logs during SASL/SCRAM
Rather temporary solution before proper:
https://github.com/neondatabase/neon/issues/5006
It requires more plumbing so lets not attach deleted tenants first and
then implement resume.
Additionally fix `assert_prefix_empty`. It had a buggy prefix calculation,
and since we always asserted for absence of stuff it worked. Here I
started to assert for presence of stuff too and it failed. Added more
"presence" asserts to other places to be confident that it works.
Resolves [#5016](https://github.com/neondatabase/neon/issues/5016)
## Problem
The previous version of neon (that we use in the forward compatibility test)
has installed `amcheck` extension now. We can run `pg_amcheck`
unconditionally.
## Summary of changes
- Run `pg_amcheck` in compatibility tests unconditionally
Before this patch, we had the `off` and `blknum` as function-wide
mutable state. Now it's contained in the `Writer` struct.
The use of `push_bytes` instead of index-based filling of the buffer
also makes it easier to reason about what's going on.
This is prep for https://github.com/neondatabase/neon/pull/4994
Don't download ext_index.json from s3, but instead receive it as a part of spec from control plane.
This eliminates s3 access for most compute starts,
and also allows us to update extensions spec on the fly
Restores #4937 work relating to the ability to use `ResidentDeltaLayer`
(which is an Arc wrapper) in #4938 for the ValueRef's by removing the
borrow from `ValueRef` and providing it from an upper layer.
This should not have any functional changes, most importantly, the
`main` will continue to use the borrowed `DeltaLayerInner`. It might be
that I can change #4938 to be like this. If that is so, I'll gladly rip
out the `Ref` and move the borrow back. But I'll first want to look at
the current test failures.
This makes it more explicit that these are different u64-sized
namespaces.
Re-using one in place of the other would be catastrophic.
Prep for https://github.com/neondatabase/neon/pull/4994
which will eliminate the ephemeral_file::FileId and move the
blob_io::FileId into page_cache.
It makes sense to have this preliminary commit though,
to minimize amount of new concept in #4994 and other
preliminaries that depend on that work.
## Problem
As documented, the global connection pool will be high contention.
## Summary of changes
Use DashMap rather than Mutex<HashMap>.
Of note, DashMap currently uses a RwLock internally, but it's partially
sharded to reduce contention by a factor of N. We could potentially use
flurry which is a port of Java's concurrent hashmap, but I have no good
understanding of it's performance characteristics. Dashmap is at least
equivalent to hashmap but less contention.
See the read heavy benchmark to analyse our expected performance
<https://github.com/xacrimon/conc-map-bench#ready-heavy>
I also spoke with the developer of dashmap recently, and they are
working on porting the implementation to use concurrent HAMT FWIW
## Problem
PR #4839 has already reduced the number of b-tree traversals and vec
creations from 3 to 2, but as pointed out in
https://github.com/neondatabase/neon/pull/4839#discussion_r1279167815 ,
we would ideally just traverse the b-tree once during compaction.
Afer #4836, the two vecs created are one for the list of keys, lsns and
sizes, and one for the list of `(key, lsn, value reference)`. However,
they are not equal, as pointed out in
https://github.com/neondatabase/neon/pull/4839#issuecomment-1660418012
and the following comment: the key vec creation combines multiple
entries for which the lsn is changing but the key stays the same into
one, with the size being the sum of the sub-sizes. In SQL, this would
correspond to something like `SELECT key, lsn, SUM(size) FROM b_tree
GROUP BY key;` and `SELECT key, lsn, val_ref FROM b_tree;`. Therefore,
the join operation is non-trivial.
## Summary of changes
This PR merges the two lists of keys and value references into one. It's
not a trivial change and affects the size pattern of the resulting
files, which is why this is in a separate PR from #4839 .
The key vec is used in compaction for determining when to start a new
layer file. The loop uses various thresholds to come to this conclusion,
but the grouping via the key has led to the behaviour that regardless of
the threshold, it only starts a new file when either a new key is
encountered, or a new delta file.
The new code now does the combination after the merging and sorting of
the various keys from the delta files. This *mostly* does the same as
the old code, except for a detail: with the grouping done on a
per-delta-layer basis, the sorted and merged vec would still have
multiple entries for multiple delta files, but now, we don't have an
easy way to tell when a new input delta layer file is encountered, so we
cannot create multiple entries on that basis easily.
To prevent possibly infinite growth, our new grouping code compares the
combined size with the threshold, and if it is exceeded, it cuts a new
entry so that the downstream code can cut a new output file. Here, we
perform a tradeoff however, as if the threshold is too small, we risk
putting entries for the same key into multiple layer files, but if the
threshold is too big, we can in some instances exceed the target size.
Currently, we set the threshold to the target size, so in theory we
would stay below or roughly at double the `target_file_size`.
We also fix the way the size was calculated for the last key. The calculation
was wrong and accounted for the old layer's btree, even though we
already account for the overhead of the in-construction btree.
Builds on top of #4839 .
Previously list_prefixes was incorrectly used for that purpose. Change
to use list_files. Add a test.
Some drive by refactorings on python side to move helpers out of
specific test file to be widely accessible
resolves https://github.com/neondatabase/neon/issues/4499
For `delete_objects` it was injecting failures for whole delete_objects operation
and then for every delete it contains. Make it fail once for the whole operation.
## Problem
This was set to 5 seconds, which was very close to how long a compaction
took on my workstation, and when deletion is blocked on compaction the
test would fail.
We will fix this to make compactions drop out on deletion, but for the
moment let's stabilize the test.
## Summary of changes
Change timeout on timeline deletion in
`test_timeline_deletion_with_files_stuck_in_upload_queue` from 5 seconds
to 30 seconds.
To this end add
1) -e option to 'neon_local safekeeper start' command appending extra options
to safekeeper invocation;
2) Allow multiple occurrences of the same option in safekeepers, the last
value is taken.
3) Allow to specify empty string for *-auth-public-key-path opts, it
disables auth for the service.
The same option enables auth and specifies public key, so this allows to use
different public keys as well. The motivation is to
1) Allow to e.g. change pageserver key/token without replacing all compute
tokens.
2) Enable auth gradually.
## Problem
Deletions can be possibly reordered. Use fsync to avoid the case when
mark file doesnt exist but other tenant/timeline files do.
See added comments.
resolves#4987
## Problem
While adding new test results format, I've also changed the way we
upload Allure reports to S3
(722c7956bb)
to avoid duplicated results from previous runs. But it broke links at
earlier results (results are still available but on different URLs).
This PR fixes this (by reverting logic in
722c7956bb
changes), and moves the logic for storing test results into db to allure
generate step. It allows us to avoid test results duplicates in the db
and saves some time on extra s3 downloads that happened in a different
job before the PR.
Ref https://neondb.slack.com/archives/C059ZC138NR/p1691669522160229
## Summary of changes
- Move test results storing logic from a workflow to
`actions/allure-report-generate`
## Problem
HTTP batch queries currently allow us to set the isolation level and
read only, but not deferrable.
## Summary of changes
Add support for deferrable.
Echo deferrable status in response headers only if true.
Likewise, now echo read-only status in response headers only if true.
#4942 left old metrics in place for migration purposes. It was noticed
that from new metrics the total number of deleted objects was forgotten,
add it.
While reviewing, it was noticed that the delete_object could just be
delete_objects of one.
---------
Co-authored-by: Arpad Müller <arpad-m@users.noreply.github.com>
## Problem
The `BlockReader` trait is not ready to be asyncified, as associated
types are not supported by asyncification strategies like via the
`async_trait` macro, or via adopting enums.
## Summary of changes
Remove the `BlockLease` associated type from the `BlockReader` trait and
turn it into an enum instead, bearing the same name. The enum has two
variants, one of which is gated by `#[cfg(test)]`. Therefore, outside of
test settings, the enum has zero overhead over just having the
`PageReadGuard`. Using the enum allows us to impl `BlockReader` without
needing the page cache.
Part of https://github.com/neondatabase/neon/issues/4743
## Problem
The `BlockCursor::read_blob` and `BlockCursor::read_blob_into_buf`
functions are calling `read_blk` internally, so if we want to make that
function async fn, they need to be async themselves.
## Summary of changes
* We first turn `ValueRef::load` into an async fn.
* Then, we switch the `RwLock` implementation in `InMemoryLayer` to use
the one from `tokio`.
* Last, we convert the `read_blob` and `read_blob_into_buf` functions
into async fn.
In three instances we use `Handle::block_on`:
* one use is in compaction code, which currently isn't async. We put the
entire loop into an `async` block to prevent the potentially hot loop
from doing cross-thread operations.
* one use is in dumping code for `DeltaLayer`. The "proper" way to
address this would be to enable the visit function to take async
closures, but then we'd need to be generic over async fs non async,
which [isn't supported by rust right
now](https://blog.rust-lang.org/inside-rust/2022/07/27/keyword-generics.html).
The other alternative would be to do a first pass where we cache the
data into memory, and only then to dump it.
* the third use is in writing code, inside a loop that copies from one
file to another. It is is synchronous and we'd like to keep it that way
(for now?).
Part of #4743
## Problem
It's nice if `single query : single response :: batch query : batch
response`.
But at present, in the single case we send `{ query: '', params: [] }`
and get back a single `{ rows: [], ... }` object, while in the batch
case we send an array of `{ query: '', params: [] }` objects and get
back not an array of `{ rows: [], ... }` objects but a `{ results: [ {
rows: [] , ... }, { rows: [] , ... }, ... ] }` object instead.
## Summary of changes
With this change, the batch query body becomes `{ queries: [{ query: '',
params: [] }, ... ] }`, which restores a consistent relationship between
the request and response bodies.
Originated from test failure where we got SlowDown error from s3.
The patch generalizes `download_retry` to not be download specific.
Resulting `retry` function is moved to utils crate. `download_retries`
is now a thin wrapper around this `retry` function.
To ensure that all needed retries are in place test code now uses
`test_remote_failures=1` setting.
Ref https://neondb.slack.com/archives/C059ZC138NR/p1691743624353009
## Problem
Currently, image generation reads delta layers before writing out
subsequent image layers, which updates the access time of the delta
layers and effectively puts them at the back of the queue for eviction.
This is the opposite of what we want, because after a delta layer is
covered by a later image layer, it's likely that subsequent reads of
latest data will hit the image rather than the delta layer, so the delta
layer should be quite a good candidate for eviction.
## Summary of changes
`RequestContext` gets a new `ATimeBehavior` field, and a
`RequestContextBuilder` helper so that we can optionally add the new
field without growing `RequestContext::new` every time we add something
like this.
Request context is passed into the `record_access` function, and the
access time is not updated if `ATimeBehavior::Skip` is set.
The compaction background task constructs its request context with this
skip policy.
Closes: https://github.com/neondatabase/neon/issues/4969
This code was mostly copied from walsender.c and the idea was to keep it
similar to walsender.c, so that we can easily copy-paste future upstream
changes to walsender.c to waproposer_utils.c, too. But right now I see that
deleting it doesn't break anything, so it's better to remove unused parts.
It allows term leader to ensure he pulls data from the correct term. Absense of
it wasn't very problematic due to CRC checks, but let's be strict.
walproposer still doesn't use it as we're going to remove recovery completely
from it.
Patches a bug in vm-builder where it did not include enough parameters
in the query string. These parameters are `host=localhost port=5432`.
These parameters were not necessary for the monitor because the `pq` go
postgres driver included them by default.
## Problem
In some places, the lock on `InMemoryLayerInner` is only created to
obtain `end_lsn`. This is not needed however, if we move `end_lsn` to
`InMemoryLayer` instead.
## Summary of changes
Make `end_lsn` a member of `InMemoryLayer`, and do less locking of
`InMemoryLayerInner`. `end_lsn` is changed from `Option<Lsn>` into an
`OnceLock<Lsn>`. Thanks to this change, we don't need to lock any more
in three functions.
Part of #4743 . Suggested in
https://github.com/neondatabase/neon/pull/4905#issuecomment-1666458428 .
Found this log on staging:
```
2023-08-10T17:42:58.573790Z INFO handling interactive connection from client protocol="ws"
```
We seem to be losing websocket span in spawn, this patch fixes it.
## Problem
1MB response limit is very small.
## Summary of changes
This data is not yet tracked, so we shoudn't raise the limit too high yet.
But as discussed with @kelvich and @conradludgate, this PR lifts it to
10MB, and adds also details of the limit to the error response.
`pg_regress` is flaky: https://github.com/neondatabase/neon/issues/559
Consolidated `CHECKPOINT` to `check_restored_datadir_content`, add a
wait for `wait_for_last_flush_lsn`.
Some recently introduced flakyness was fixed with #4948.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
The `DiskBtreeReader::visit` function calls `read_blk` internally, and
while #4863 converted the API of `visit` to async, the internal function
is still recursive. So, analogously to #4838, we turn the recursive
function into an iterative one.
## Summary of changes
First, we prepare the change by moving the for loop outside of the case
switch, so that we only have one loop that calls recursion. Then, we
switch from using recursion to an approach where we store the search
path inside the tree on a stack on the heap.
The caller of the `visit` function can control when the search over the
B-Tree ends, by returning `false` from the closure. This is often used
to either only find one specific entry (by always returning `false`),
but it is also used to iterate over all entries of the B-tree (by always
returning `true`), or to look for ranges (mostly in tests, but
`get_value_reconstruct_data` also has such a use).
Each stack entry contains two things: the block number (aka the block's
offset), and a children iterator. The children iterator is constructed
depending on the search direction, and with the results of a binary
search over node's children list. It is the only thing that survives a
spilling/push to the stack, everything else is reconstructed. In other
words, each stack spill, will, if the search is still ongoing, cause an
entire re-parsing of the node. Theoretically, this would be a linear
overhead in the number of leaves the search visits. However, one needs
to note:
* the workloads to look for a specific entry are just visiting one leaf,
ever, so this is mostly about workloads that visit larger ranges,
including ones that visit the entire B-tree.
* the requests first hit the page cache, so often the cost is just in
terms of node deserialization
* for nodes that only have leaf nodes as children, no spilling to the
stack-on-heap happens (outside of the initial request where the iterator
is `None`). In other words, for balanced trees, the spilling overhead is
$\Theta\left(\frac{n}{b^2}\right)$, where `b` is the branching factor
and `n` is the number of nodes in the tree. The B-Trees in the current
implementation have a branching factor of roughly `PAGE_SZ/L` where
`PAGE_SZ` is 8192, and `L` is `DELTA_KEY_SIZE = 26` or `KEY_SIZE = 18`
in production code, so this gives us an estimate that we'd be re-loading
an inner node for every 99000 leaves in the B-tree in the worst case.
Due to these points above, I'd say that not fully caching the inner
nodes with inner children is reasonable, especially as we also want to
be fast for the "find one specific entry" workloads, where the stack
content is never accessed: any action to make the spilling
computationally more complex would contribute to wasted cycles here,
even if these workloads "only" spill one node for each depth level of
the b-tree (which is practically always a low single-digit number,
Kleppmann points out on page 81 that for branching factor 500, a four
level B-tree with 4 KB pages can store 250 TB of data).
But disclaimer, this is all stuff I thought about in my head, I have not
confirmed it with any benchmarks or data.
Builds on top of #4863, part of #4743
The test mutates a shared directory which does not work with multiple
concurrent tests. It is being fixed, so this should be a very temporary
band-aid.
Cc: #4949.
## Problem
For some tests, we override the default timeout (300s / 5m) with a larger
values like 600s / 10m or even 1800s / 30m, even if it's not required.
I've collected some statistics (for the last 60 days) for tests
duration:
| test | max (s) | p99 (s) | p50 (s) | count |
|-----------------------------------|---------|---------|---------|-------|
| test_hot_standby | 9 | 2 | 2 | 5319 |
| test_import_from_vanilla | 16 | 9 | 6 | 5692 |
| test_import_from_pageserver_small | 37 | 7 | 5 | 5719 |
| test_pg_regress | 101 | 73 | 44 | 5642 |
| test_isolation | 65 | 56 | 39 | 5692 |
A couple of tests that I left with custom 600s / 10m timeout.
| test | max (s) | p99 (s) | p50 (s) | count |
|-----------------------------------|---------|---------|---------|-------|
| test_gc_cutoff | 456 | 224 | 109 | 5694 |
| test_pageserver_chaos | 528 | 267 | 121 | 5712 |
## Summary of changes
- Remove `@pytest.mark.timeout` annotation from several tests
Don't panic if library or extension is not found in remote extension storage
or download has failed. Instead, log the error and proceed - if file is not
present locally as well, postgres will fail with postgres error. If it is a
shared_preload_library, it won't start, because of bad config. Otherwise, it
will just fail to run the SQL function/ command that needs the library.
Also, don't try to download extensions if remote storage is not configured.
In the quest to solve #4745 by moving the download/evictedness to be
internally mutable factor of a Layer and get rid of `trait
PersistentLayer` at least for prod usage, `layer_removal_cs`, we present
some misc cleanups.
---------
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
## Problem
One might wonder why the code here doesn't use `TimelineId` or
`TenantId`. I originally had a refactor to use them, but then discarded
it, because converting to strings on each time there is a read or write
is wasteful.
## Summary of changes
We add some docs explaining why here no `TimelineId` or `TenantId` is
being used.
## Problem
The current test history format is a bit inconvenient:
- It stores all test results in one row, so all queries should include
subqueries which expand the test
- It includes duplicated test results if the rerun is triggered manually
for one of the test jobs (for example, if we rerun `debug-pg14`, then
the report will include duplicates for other build types/postgres
versions)
- It doesn't have a reference to run_id, which we use to create a link
to allure report
Here's the proposed new format:
```
id BIGSERIAL PRIMARY KEY,
parent_suite TEXT NOT NULL,
suite TEXT NOT NULL,
name TEXT NOT NULL,
status TEXT NOT NULL,
started_at TIMESTAMPTZ NOT NULL,
stopped_at TIMESTAMPTZ NOT NULL,
duration INT NOT NULL,
flaky BOOLEAN NOT NULL,
build_type TEXT NOT NULL,
pg_version INT NOT NULL,
run_id BIGINT NOT NULL,
run_attempt INT NOT NULL,
reference TEXT NOT NULL,
revision CHAR(40) NOT NULL,
raw JSONB COMPRESSION lz4 NOT NULL,
```
## Summary of changes
- Misc allure changes:
- Update allure to 2.23.1
- Delete files from previous runs in HTML report (by using `sync
--delete` instead of `mv`)
- Use `test-cases/*.json` instead of `suites.json`, using this directory
allows us to catch all reruns.
- Until we migrated `scripts/flaky_tests.py` and
`scripts/benchmark_durations.py` store test results in 2 formats (in 2
different databases).
## Problem
When an endpoint is shutting down, it can take a few seconds. Currently
when starting a new compute, this causes an "endpoint is in transition"
error. We need to add delays before retrying to ensure that we allow
time for the endpoint to shutdown properly.
## Summary of changes
Adds a delay before retrying in auth. connect_to_compute already has
this delay
## Problem
The safekeeper advertises the same address specified in `--listen-pg`,
which is problematic when the listening address is different from the
address that the pageserver can use to connect to the safekeeper.
## Summary of changes
Add a new optional flag called `--advertise-pg` for the address to be
advertised. If this flag is not specified, the behavior is the same as
before.
## Problem
Currently to know how long pageserver startup took requires inspecting
logs.
## Summary of changes
`pageserver_startup_duration_ms` metric is added, with label `phase` for
different phases of startup.
These are broken down by phase, where the phases correspond to the
existing wait points in the code:
- Start of doing I/O
- When tenant load is done
- When initial size calculation is done
- When background jobs start
- Then "complete" when everything is done.
`pageserver_startup_is_loading` is a 0/1 gauge that indicates whether we are in the initial load of tenants.
`pageserver_tenant_activation_seconds` is a histogram of time in seconds taken to activate a tenant.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
The pageserver<->safekeeper protocol uses error messages to indicate end
of stream. pageserver already logs these at INFO level, but the inner
error message includes the word "ERROR", which interferes with log
searching.
Example:
```
walreceiver connection handling ended: db error: ERROR: ending streaming to Some("pageserver") at 0/4031CA8
```
The inner DbError has a severity of ERROR so DbError's Display
implementation includes that ERROR, even though we are actually
logging the error at INFO level.
## Summary of changes
Introduce an explicit WalReceiverError type, and in its From<>
for postgres errors, apply the logic from ExpectedError, for
expected errors, and a new condition for successes.
The new output looks like:
```
walreceiver connection handling ended: Successful completion: ending streaming to Some("pageserver") at 0/154E9C0, receiver is caughtup and there is no computes
```
## Problem
I spent a few minutes seeing how fast I could get our regression test
suite to run on my workstation, for when I want to run a "did I break
anything?" smoke test before pushing to CI.
- Test runtime was dominated by a couple of tests that run for longer
than all the others take together
- Test concurrency was limited to <16 by the ports-per-worker setting
There's no "right answer" for how long a test should
be, but as a rule of thumb, no one test should run
for much longer than the time it takes to run all the
other tests together.
## Summary of changes
- Make the ports per worker setting dynamic depending on worker count
- Modify the longest running tests to run for a shorter time
(`test_duplicate_layers` which uses a pgbench runtime) or fewer
iterations (`test_restarts_frequent_checkpoints`).
## Problem
PR #4839 didn't output the keys/values in lsn order, but for a given
key, the lsns were kept in incoming file order.
I think the ordering by lsn is expected.
## Summary of changes
We now also sort by `(key, lsn)`, like we did before #4839.
## Problem
Running `pagectl draw-timeline` on a pageserver directory wasn't working
out of the box because it trips up on the `metadata` file.
## Summary of changes
Just ignore the `metadata` file in the list of input files passed to
`draw-timeline`.
Cache changes are now DEBUG2
Logs that indicate disabled caches now explicitly call out that the file cache is disabled on WARNING level instead of LOG/INFO
We currently cannot drop tenant before removing it's directory, or use
Tenant::drop for this. This creates unnecessary or inactionable warnings
during detach at least. Silence the most typical, file not found. Log
remaining at `error!`.
Cc: #2442
We don't know how our s3 remote_storage is performing, or if it's
blocking the shutdown. Well, for sampling reasons, we will not really
know even after this PR.
Add metrics:
- align remote_storage metrics towards #4813 goals
- histogram
`remote_storage_s3_request_seconds{request_type=(get_object|put_object|delete_object|list_objects),
result=(ok|err|cancelled)}`
- histogram `remote_storage_s3_wait_seconds{request_type=(same kinds)}`
- counter `remote_storage_s3_cancelled_waits_total{request_type=(same
kinds)}`
Follow-up work:
- After release, remove the old metrics, migrate dashboards
Histogram buckets are rough guesses, need to be tuned. In pageserver we
have a download timeout of 120s, so I think the 100s bucket is quite
nice.
## Problem
The current output from a prod binary at startup is:
```
git-env:765455bca22700e49c053d47f44f58a6df7c321f failpoints: true, features: [] launch_timestamp: 2023-08-02 10:30:35.545217477 UTC
```
It's confusing to read that line, then read the code and think "if
failpoints is true, but not in the features list, what does that mean?".
As far as I can tell, the check of `fail/failpoints` is just always
false because cargo doesn't expose features across crates like this: the
`fail/failpoints` syntax works in the cargo CLI but not from a macro in
some crate other than `fail`.
## Summary of changes
Remove the lines that try to check `fail/failpoints` from the pageserver
entrypoint module. This has no functional impact but makes the code
slightly easier to understand when trying to make sense of the line
printed on startup.
## Problem
Pre-requisites for #4852 and #4853
## Summary of changes
1. Includes the client's IP address (which we already log) with the span
info so we can have it on all associated logs. This makes making
dashboards based on IP addresses easier.
2. Switch to a consistent error/warning log for errors during
connection. This includes error, num_retries, retriable=true/false and a
consistent log message that we can grep for.
## Problem
The functions `DeltaLayer::load_inner` and `ImageLayer::load_inner` are
calling `read_blk` internally, which we would like to turn into an async
fn.
## Summary of changes
We switch from `once_cell`'s `OnceCell` implementation to the one in
`tokio` in order to be able to call an async `get_or_try_init` function.
Builds on top of #4839, part of #4743
During deploys of 2023-08-03 we logged too much on shutdown. Fix the
logging by timing each top level shutdown step, and possibly warn on it
taking more than a rough threshold, based on how long I think it
possibly should be taking. Also remove all shutdown logging from
background tasks since there is already "shutdown is taking a long time"
logging.
Co-authored-by: John Spray <john@neon.tech>
## Problem
`DiskBtreeReader::get` and `DiskBtreeReader::visit` both call `read_blk`
internally, which we would like to make async in the future. This PR
focuses on making the interface of these two functions `async`. There is
further work to be done in forms of making `visit` to not be recursive
any more, similar to #4838. For that, see
https://github.com/neondatabase/neon/pull/4884.
Builds on top of https://github.com/neondatabase/neon/pull/4839, part of
https://github.com/neondatabase/neon/issues/4743
## Summary of changes
Make `DiskBtreeReader::get` and `DiskBtreeReader::visit` async functions
and `await` in the places that call these functions.
## Problem
When setting up for the first time I hit a couple of nits running tests:
- It wasn't obvious that `openssl` and `poetry` were needed (poetry is
mentioned kind of obliquely via "dependency installation notes" rather
than being in the list of rpm/deb packages to install.
- It wasn't obvious how to get the tests to run for just particular
parameters (e.g. just release mode)
## Summary of changes
Add openssl and poetry to the package lists.
Add an example of how to run pytest for just a particular build type and
postgres version.
## Problem
neon_fixtures.py has grown to unmanageable size. It attracts conflicts.
When adding specific utils under for example `fixtures/pageserver`
things sometimes need to import stuff from `neon_fixtures.py` which
creates circular import. This is usually only needed for type
annotations, so `typing.TYPE_CHECKING` flag can mask the issue.
Nevertheless I believe that splitting neon_fixtures.py into smaller
parts is a better approach.
Currently the PR contains small things, but I plan to continue and move
NeonEnv to its own `fixtures.env` module. To keep the diff small I think
this PR can already be merged to cause less conflicts.
UPD: it looks like currently its not really possible to fully avoid
usage of `typing.TYPE_CHECKING`, because some components directly depend
on each other. I e Env -> Cli -> Env cycle. But its still worth it to
avoid it in as many places as possible. And decreasing neon_fixture's
size still makes sense.
## Problem
If AWS credentials are not set locally (via
AWS_ACCESS_KEY_ID/AWS_SECRET_ACCESS_KEY env vars)
`test_remote_library[release-pg15-mock_s3]` test fails with the
following error:
```
ERROR could not start the compute node: Failed to download a remote file: Failed to download S3 object: failed to construct request
```
## Summary of changes
- set AWS credentials for endpoints programmatically
## Problem
The k-merge in pageserver compaction currently relies on iterators over
the keys and also over the values. This approach does not support async
code because we are using iterators and those don't support async in
general. Also, the k-merge implementation we use doesn't support async
either. Instead, as we already load all the keys into memory, just do
sorting in-memory.
## Summary of changes
The PR can be read commit-by-commit, but most importantly, it:
* Stops using kmerge in compaction, using slice sorting instead.
* Makes `load_keys` and `load_val_refs` async, using `Handle::block_on`
in the compaction code as we don't want to turn the compaction function,
called inside `spawn_blocking`, into an async fn.
Builds on top of #4836, part of
https://github.com/neondatabase/neon/issues/4743
## Problem
Error messages like this coming up during normal operations:
```
Compaction failed, retrying in 2s: timeline is Stopping
Compaction failed, retrying in 2s: Cannot run compaction iteration on inactive tenant
```
## Summary of changes
Add explicit handling for the shutdown case in these locations, to
suppress error logs.
as needed since #4715 or this will happen:
```
ERROR panic{thread=main location=.../hyper-rustls-0.23.2/src/config.rs:48:9}: no CA certificates found
```
Add infrastructure to dynamically load postgres extensions and shared libraries from remote extension storage.
Before postgres start downloads list of available remote extensions and libraries, and also downloads 'shared_preload_libraries'. After postgres is running, 'compute_ctl' listens for HTTP requests to load files.
Postgres has new GUC 'extension_server_port' to specify port on which 'compute_ctl' listens for requests.
When PostgreSQL requests a file, 'compute_ctl' downloads it.
See more details about feature design and remote extension storage layout in docs/rfcs/024-extension-loading.md
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alek Westover <alek.westover@gmail.com>
Two stabs at this, by mocking a http receiver and the globals out (now
reverted) and then by separating the timeline dependency and just
testing what kind of events certain timelines produce. I think this
pattern could work for some of our problems.
Follow-up to #4822.
## Problem
When the eviction threshold is an integer multiple of the eviction
period, it is unreliable to skip imitating accesses based on whether the
last imitation was more recent than the threshold.
This is because as finite time passes
between the time used for the periodic execution, and the 'now' time
used for updating last_layer_access_imitation. When this is just a few
milliseconds, and everything else is on-time, then a 5 second threshold
with a 1 second period will end up entering its 5th iteration slightly
_less than_ 5 second since last_layer_access_imitation, and thereby
skipping instead of running the imitation. If a few milliseconds then
pass before we check the access time of a file that _should_ have been
bumped by the imitation pass, then we end up evicting something we
shouldn't have evicted.
## Summary of changes
We can make this race far less likely by using the threshold minus one
interval as the period for re-executing the imitate_layer_accesses: that
way we're not vulnerable to racing by just a few millis, and there would
have to be a delay of the order `period` to cause us to wrongly evict a
layer.
This is not a complete solution: it would be good to revisit this and
use a non-walltime mechanism for pinning these layers into local
storage, rather than relying on bumping access times.
## Problem
The k-merge in pageserver compaction currently relies on iterators over
the keys and also over the values. This approach does not support async
code because we are using iterators and those don't support async in
general. Also, the k-merge implementation we use doesn't support async
either. Instead, as we already load all the keys into memory, the plan
is to just do the sorting in-memory for now, switch to async, and then
once we want to support workloads that don't have all keys stored in
memory, we can look into switching to a k-merge implementation that
supports async instead.
## Summary of changes
The core of this PR is the move from functions on the `PersistentLayer`
trait to return custom iterator types to inherent functions on `DeltaLayer`
that return buffers with all keys or value references.
Value references are a type we created in this PR, containing a
`BlobRef` as well as an `Arc` pointer to the `DeltaLayerInner`, so that
we can lazily load the values during compaction. This preserves the
property of the current code.
This PR does not switch us to doing the k-merge via sort on slices, but
with this PR, doing such a switch is relatively easy and only requires
changes of the compaction code itself.
Part of https://github.com/neondatabase/neon/issues/4743
## Problem
See https://neondb.slack.com/archives/C036U0GRMRB/p1689148023067319
## Summary of changes
Define NEON_SMGR in smgr.h
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
We want to have timeline_written_size_delta which is defined as
difference to the previously sent `timeline_written_size` from the
current `timeline_written_size`.
Solution is to send it. On the first round `disk_consistent_lsn` is used
which is captured during `load` time. After that an incremental "event"
is sent on every collection. Incremental "events" are not part of
deduplication.
I've added some infrastructure to allow somewhat typesafe
`EventType::Absolute` and `EventType::Incremental` factories per
metrics, now that we have our first `EventType::Incremental` usage.
## Problem
Compatibility tests fail from time to time due to `pg_tenant_only_port`
port collision (added in https://github.com/neondatabase/neon/pull/4731)
## Summary of changes
- replace `pg_tenant_only_port` value in config with new port
- remove old logic, than we don't need anymore
- unify config overrides
## Problem
Wrong use of `conf.listen_pg_addr` in `error!()`.
## Summary of changes
Use `listen_pg_addr_tenant_only` instead of `conf.listen_pg_addr`.
Signed-off-by: yaoyinnan <35447132+yaoyinnan@users.noreply.github.com>
## Problem
1. In the CacheInvalid state loop, we weren't checking the
`num_retries`. If this managed to get up to `32`, the retry_after
procedure would compute 2^32 which would overflow to 0 and trigger a div
by zero
2. When fixing the above, I started working on a flow diagram for the
state machine logic and realised it was more complex than it had to be:
a. We start in a `Cached` state
b. `Cached`: call `connect_once`. After the first connect_once error, we
always move to the `CacheInvalid` state, otherwise, we return the
connection.
c. `CacheInvalid`: we attempt to `wake_compute` and we either switch to
Cached or we retry this step (or we error).
d. `Cached`: call `connect_once`. We either retry this step or we have a
connection (or we error) - After num_retries > 1 we never switch back to
`CacheInvalid`.
## Summary of changes
1. Insert a `num_retries` check in the `handle_try_wake` procedure. Also
using floats in the retry_after procedure to prevent the overflow
entirely
2. Refactor connect_to_compute to be more linear in design.
## Problem
Existing IndexPart unit tests only exercised the version 1 format (i.e.
without deleted_at set).
## Summary of changes
Add a test that sets version to 2, and sets a value for deleted_at.
Closes https://github.com/neondatabase/neon/issues/4162
## Problem
`DiskBtreeReader::dump` calls `read_blk` internally, which we want to
make async in the future. As it is currently relying on recursion, and
async doesn't like recursion, we want to find an alternative to that and
instead traverse the tree using a loop and a manual stack.
## Summary of changes
* Make `DiskBtreeReader::dump` and all the places calling it async
* Make `DiskBtreeReader::dump` non-recursive internally and use a stack
instead. It now deparses the node in each iteration, which isn't
optimal, but on the other hand it's hard to store the node as it is
referencing the buffer. Self referential data are hard in Rust. For a
dumping function, speed isn't a priority so we deparse the node multiple
times now (up to branching factor many times).
Part of https://github.com/neondatabase/neon/issues/4743
I have verified that output is unchanged by comparing the output of this
command both before and after this patch:
```
cargo test -p pageserver -- particular_data --nocapture
```
## Problem
ref https://github.com/neondatabase/neon/pull/4721, ref
https://github.com/neondatabase/neon/issues/4709
## Summary of changes
This PR adds unit tests for wake_compute.
The patch adds a new variant `Test` to auth backends. When
`wake_compute` is called, we will verify if it is the exact operation
sequence we are expecting. The operation sequence now contains 3 more
operations: `Wake`, `WakeRetry`, and `WakeFail`.
The unit tests for proxy connects are now complete and I'll continue
work on WebSocket e2e test in future PRs.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
See: https://neondb.slack.com/archives/C04USJQNLD6/p1689973957908869
## Summary of changes
Bump Postgres version
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
We have some amount of outdated logic in test_compatibility, that we
don't need anymore.
## Summary of changes
- Remove `PR4425_ALLOWED_DIFF` and tune `dump_differs` method to accept
allowed diffs in the future (a cleanup after
https://github.com/neondatabase/neon/pull/4425)
- Remote etcd related code (a cleanup after
https://github.com/neondatabase/neon/pull/2733)
- Don't set `preserve_database_files`
Run `pg_amcheck` in forward and backward compatibility tests to catch
some data corruption.
## Summary of changes
- Add amcheck compiling to Makefile
- Add `pg_amcheck` to test_compatibility
The test was starting two endpoints on the same branch as discovered by
@petuhovskiy.
The fix is to allow passing branch-name from the python side over to
neon_local, which already accepted it.
Split from #4824, which will handle making this more misuse resistant.
error is not needed because anyhow will have the cause chain reported
anyways.
related to test_neon_cli_basics being flaky, but doesn't actually fix
any flakyness, just the obvious stray `{e}`.
## Problem
wake_compute can fail sometimes but is eligible for retries. We retry
during the main connect, but not during auth.
## Summary of changes
retry wake_compute during auth flow if there was an error talking to
control plane, or if there was a temporary error in waking the compute
node
## Problem
In https://github.com/neondatabase/neon/issues/4743 , I'm trying to make
more of the pageserver async, but in order for that to happen, I need to
be able to persist the result of `ImageLayer::load` across await points.
For that to happen, the return value needs to be `Send`.
## Summary of changes
Use `OnceLock` in the image layer instead of manually implementing it
with booleans, locks and `Option`.
Part of #4743
## Problem
The first session event we emit is after we receive the first startup
packet from the client. This means we can't detect any issues between
TCP open and handling of the first PG packet
## Summary of changes
Add some new logs for websocket upgrade and connection handling
## Problem
We've got an example of Allure reports from 2 different runners for the
same build that started to upload at the exact second, making one
overwrite another
## Summary of changes
- Use the Postgres version to distinguish artifacts (along with the
build type)
We need some real extensions in S3 to accurately test the code for
handling remote extensions.
In this PR we just upload three extensions (anon, kq_imcx and postgis), which is
enough for testing purposes for now. In addition to creating and
uploading the extension archives, we must generate a file
`ext_index.json` which specifies important metadata about the
extensions.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We want to measure how many users are using TCP/WS connections.
We also want to measure how long it takes to establish a connection with
the compute node.
I plan to also add a separate counter for HTTP requests, but because of
pooling this needs to be disambiguated against new HTTP compute
connections
## Summary of changes
* record connection type (ws/tcp) in the connection counters.
* record connection latency including retry latency
## Problem
Currently we delete local files first, so if pageserver restarts after
local files deletion then remote deletion is not continued. This can be
solved with inversion of these steps.
But even if these steps are inverted when index_part.json is deleted
there is no way to distinguish between "this timeline is good, we just
didnt upload it to remote" and "this timeline is deleted we should
continue with removal of local state". So to solve it we use another
mark file. After index part is deleted presence of this mark file
indentifies that it was a deletion intention.
Alternative approach that was discussed was to delete all except
metadata first, and then delete metadata and index part. In this case we
still do not support local only configs making them rather unsafe
(deletion in them is already unsafe, but this direction solidifies this
direction instead of fixing it). Another downside is that if we crash
after local metadata gets removed we may leave dangling index part on
the remote which in theory shouldnt be a big deal because the file is
small.
It is not a big change to choose another approach at this point.
## Summary of changes
Timeline deletion sequence:
1. Set deleted_at in remote index part.
2. Create local mark file.
3. Delete local files except metadata (it is simpler this way, to be
able to reuse timeline initialization code that expects metadata)
4. Delete remote layers
5. Delete index part
6. Delete meta, timeline directory.
7. Delete mark file.
This works for local only configuration without remote storage.
Sequence is resumable from any point.
resolves#4453
resolves https://github.com/neondatabase/neon/pull/4552 (the issue was
created with async cancellation in mind, but we can still have issues
with retries if metadata is deleted among the first by remove_dir_all
(which doesnt have any ordering guarantees))
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
This PR adds support for non-interactive transaction query endpoint.
It accepts an array of queries and parameters and returns an array of
query results. The queries will be run in a single transaction one
after another on the proxy side.
count only once; on startup create the counter right away because we
will not observe any changes later.
small, probably never reachable from outside fix for #4796.
We currently have a timeseries for each of the tenants in different
states. We only want this for Broken. Other states could be counters.
Fix this by making the `pageserver_tenant_states_count` a counter
without a `tenant_id` and
add a `pageserver_broken_tenants_count` which has a `tenant_id` label,
each broken tenant being 1.
Given now we've refactored `connect_to_compute` as a generic, we can
test it with mock backends. In this PR, we mock the error API and
connect_once API to test the retry behavior of `connect_to_compute`. In
the next PR, I'll add mock for credentials so that we can also test
behavior with `wake_compute`.
ref https://github.com/neondatabase/neon/issues/4709
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
In #4743, we'd like to convert the read path to use `async` rust. In
preparation of that, this PR switches some functions that are calling
lower level functions like `BlockReader::read_blk`,
`BlockCursor::read_blob`, etc into `async`. The PR does not switch all
functions however, and only focuses on the ones which are easy to
switch.
This leaves around some async functions that are (currently)
unnecessarily `async`, but on the other hand it makes future changes
smaller in diff.
Part of #4743 (but does not completely address it).
Fix mx_offset_to_flags_offset() function
Fixes issue #4774
Postgres `MXOffsetToFlagsOffset` was not correctly converted to Rust
because cast to u16 is done before division by modulo. It is possible
only if divider is power of two.
Add a small rust unit test to check that the function produces same results
as the PostgreSQL macro, and extend the existing python test to cover
this bug.
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Problem
close https://github.com/neondatabase/neon/issues/4712
## Summary of changes
Previously, when flushing frozen layers, it was split into two
operations: add delta layer to disk + remove frozen layer from memory.
This would cause a short period of time where we will have the same data
both in frozen and delta layer. In this PR, we merge them into one
atomic operation in layer map manager, therefore simplifying the code.
Note that if we decide to create image layers for L0 flush, it will
still be split into two operations on layer map.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
As seen in staging logs with some massive compactions
(create_image_layer), in addition to racing with compaction or gc or
even between two invocations to `evict_layer_batch`.
Cc: #4745Fixes: #3851 (organic tech debt reduction)
Solution is not to log the Not Found in such cases; it is perfectly
natural to happen. Route to this is quite long, but implemented two
cases of "race between two eviction processes" which are like our disk
usage based eviction and eviction_task, both have the separate "lets
figure out what to evict" and "lets evict" phases.
Removes a bunch of cases which used `tokio::select` to emulate the
`tokio::time::timeout` function. I've done an additional review on the
cancellation safety of these futures, all of them seem to be
cancellation safe (not that `select!` allows non-cancellation-safe
futures, but as we touch them, such a review makes sense).
Furthermore, I correct a few mentions of a non-existent
`tokio::timeout!` macro in the docs to the `tokio::time::timeout`
function.
Adds in a barrier for the duration of the `Tenant::shutdown`.
`pageserver_shutdown` will join this await, `detach`es and `ignore`s
will not.
Fixes#4429.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Updated the description that appears for hnsw when you query extensions:
```
neondb=> SELECT * FROM pg_available_extensions WHERE name = 'hnsw';
name | default_version | installed_version | comment
----------------------+-----------------+-------------------+--------------------------------------------------
hnsw | 0.1.0 | | ** Deprecated ** Please use pg_embedding instead
(1 row)
```
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Problem
We're going to reset S3 buckets for extensions
(https://github.com/neondatabase/aws/pull/413), and as soon as we're
going to change the format we store extensions on S3. Let's stop
uploading extensions in the old format.
## Summary of changes
- Disable `aws s3 cp` step for extensions
Compute now uses special safekeeper WAL service port allowing auth tokens with
only tenant scope. Adds understanding of this port to neon_local and fixtures,
as well as test of both ports behaviour with different tokens.
ref https://github.com/neondatabase/neon/issues/4730
## Problem
We use a patched version of `sharded-slab` with increased MAX_THREADS
[1]. It is not required anymore because safekeepers are async now.
A valid comment from the original PR tho [1]:
> Note that patch can affect other rust services, not only the
safekeeper binary.
- [1] https://github.com/neondatabase/neon/pull/4122
## Summary of changes
- Remove patch for `sharded-slab`
## Problem
Second half of #4699. we were maintaining 2 implementations of
handle_client.
## Summary of changes
Merge the handle_client code, but abstract some of the details.
## Checklist before requesting a review
- [X] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
Benchmarks run takes about an hour on main branch (in a single job),
which delays pipeline results. And it takes another hour if we want to
restart the job due to some failures.
## Summary of changes
- Use `pytest-split` plugin to run benchmarks on separate CI runners in
4 parallel jobs
- Add `scripts/benchmark_durations.py` for getting benchmark durations
from the database to help `pytest-split` schedule tests more evenly. It
uses p99 for the last 10 days' results (durations).
The current distribution could be better; each worker's durations vary
from 9m to 35m, but this could be improved in consequent PRs.
## Problem
10 retries * 10 second timeouts makes for a very long retry window.
## Summary of changes
Adds a 2s timeout to sql_over_http connections, and also reduces the 10s
timeout in TCP.
## Problem
Half of #4699.
TCP/WS have one implementation of `connect_to_compute`, HTTP has another
implementation of `connect_to_compute`.
Having both is annoying to deal with.
## Summary of changes
Creates a set of traits `ConnectMechanism` and `ShouldError` that allows
the `connect_to_compute` to be generic over raw TCP stream or
tokio_postgres based connections.
I'm not super happy with this. I think it would be nice to
remove tokio_postgres entirely but that will need a lot more thought to
be put into it.
I have also slightly refactored the caching to use fewer references.
Instead using ownership to ensure the state of retrying is encoded in
the type system.
## Problem
Compactions might generate files of exactly the same name as before
compaction due to our naming of layer files. This could have already
caused some mess in the system, and is known to cause some issues like
https://github.com/neondatabase/neon/issues/4088. Therefore, we now
consider duplicated layers in the post-compaction process to avoid
violating the layer map duplicate checks.
related previous works: close
https://github.com/neondatabase/neon/pull/4094
error reported in: https://github.com/neondatabase/neon/issues/4690,
https://github.com/neondatabase/neon/issues/4088
## Summary of changes
If a file already exists in the layer map before the compaction, do not
modify the layer map and do not delete the file. The file on disk at
that time should be the new one overwritten by the compaction process.
This PR also adds a test case with a fail point that produces exactly
the same set of files.
This bypassing behavior is safe because the produced layer files have
the same content / are the same representation of the original file.
An alternative might be directly removing the duplicate check in the
layer map, but I feel it would be good if we can prevent that in the
first place.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Konstantin Knizhnik <knizhnik@garret.ru>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
The `CRITICAL_OPS_BUCKETS` is not useful for getting an accurate
picture of basebackup latency because all the observations
that negatively affect our SLI fall into one bucket, i.e., 100ms-1s.
Use the same buckets as control plane instead.
This should only affect the version of the vm-informant used. The only
change to the vm-informant from v0.12.1 to v0.13.1 was:
* https://github.com/neondatabase/autoscaling/pull/407
Just a typo fix; worth getting in anyways.
## Problem
CI doesn't work for external contributors (for PRs from forks), see
#2222 for more information.
I'm proposing the following:
- External PR is created
- PR is reviewed so that it doesn't contain any malicious code
- Label `approved-for-ci-run` is added to that PR (by the reviewer)
- A new workflow picks up this label and creates an internal branch from
that PR (the branch name is `ci-run/pr-*`)
- CI is run on the branch, but the results are also propagated to the
PRs check
- We can merge a PR itself if it's green; if not — repeat.
## Summary of changes
- Create `approved-for-ci-run.yml` workflow which handles
`approved-for-ci-run` label
- Trigger `build_and_test.yml` and `neon_extra_builds.yml` workflows on
`ci-run/pr-*` branches
## Problem
`cargo +nightly doc` is giving a lot of warnings: broken links, naked
URLs, etc.
## Summary of changes
* update the `proc-macro2` dependency so that it can compile on latest
Rust nightly, see https://github.com/dtolnay/proc-macro2/pull/391 and
https://github.com/dtolnay/proc-macro2/issues/398
* allow the `private_intra_doc_links` lint, as linking to something
that's private is always more useful than just mentioning it without a
link: if the link breaks in the future, at least there is a warning due
to that. Also, one might enable
[`--document-private-items`](https://doc.rust-lang.org/cargo/commands/cargo-doc.html#documentation-options)
in the future and make these links work in general.
* fix all the remaining warnings given by `cargo +nightly doc`
* make it possible to run `cargo doc` on stable Rust by updating
`opentelemetry` and associated crates to version 0.19, pulling in a fix
that previously broke `cargo doc` on stable:
https://github.com/open-telemetry/opentelemetry-rust/pull/904
* Add `cargo doc` to CI to ensure that it won't get broken in the
future.
Fixes#2557
## Future work
* Potentially, it might make sense, for development purposes, to publish
the generated rustdocs somewhere, like for example [how the rust
compiler does
it](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_driver/index.html).
I will file an issue for discussion.
Handle test failures like:
```
AssertionError: assert not ['$ts WARN delete_timeline{tenant_id=X timeline_id=Y}: About to remove 1 files\n']
```
Instead of logging:
```
WARN delete_timeline{tenant_id=X timeline_id=Y}: Found 1 files not bound to index_file.json, proceeding with their deletion
WARN delete_timeline{tenant_id=X timeline_id=Y}: About to remove 1 files
```
For each one operation of timeline deletion, list all unref files with
`info!`, and then continue to delete them with the added spice of
logging the rare/never happening non-utf8 name with `warn!`.
Rationale for `info!` instead of `warn!`: this is a normal operation;
like we had mentioned in `test_import.py` -- basically whenever we
delete a timeline which is not idle.
Rationale for N * (`ìnfo!`|`warn!`): symmetry for the layer deletions;
if we could ever need those, we could also need these for layer files
which are not yet mentioned in `index_part.json`.
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Tests cannot be ran without configuring tracing. Split from #4678.
Does not nag about the span checks when there is no subscriber
configured, because then the spans will have no links and nothing can be
checked. Sadly the `SpanTrace::status()` cannot be used for this.
`tracing` is always configured in regress testing (running with
`pageserver` binary), which should be enough.
Additionally cleans up the test code in span checks to be in the test
code. Fixes a `#[should_panic]` test which was flaky before these
changes, but the `#[should_panic]` hid the flakyness.
Rationale for need: Unit tests might not be testing only the public or
`feature="testing"` APIs which are only testable within `regress` tests
so not all spans might be configured.
## Problem
ref https://github.com/neondatabase/neon/issues/4373
## Summary of changes
A step towards immutable layer map. I decided to finish the refactor
with this new approach and apply
https://github.com/neondatabase/neon/pull/4455 on this patch later.
In this PR, we moved all modifications of the layer map to one place
with semantic operations like `initialize_local_layers`,
`finish_compact_l0`, `finish_gc_timeline`, etc, which is now part
of `LayerManager`. This makes it easier to build new features upon
this PR:
* For immutable storage state refactor, we can simply replace the layer
map with `ArcSwap<LayerMap>` and remove the `layers` lock. Moving
towards it requires us to put all layer map changes in a single place as
in https://github.com/neondatabase/neon/pull/4455.
* For manifest, we can write to manifest in each of the semantic
functions.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
If database was created with `is_template true` Postgres doesn't allow
dropping it right away and throws error
```
ERROR: cannot drop a template database
```
so we have to unset `is_template` first.
Fixing it, I noticed that our `escape_literal` isn't exactly correct
and following the same logic as in `quote_literal_internal`, we need to
prepend string with `E`. Otherwise, it's not possible to filter
`pg_database` using `escape_literal()` result if name contains `\`, for
example.
Also use `FORCE` to drop database even if there are active connections.
We run this from `cloud_admin`, so it should have enough privileges.
NB: there could be other db states, which prevent us from dropping
the database. For example, if db is used by any active subscription
or logical replication slot.
TODO: deal with it once we allow logical replication. Proper fix should
involve returning an error code to the control plane, so it could
figure out that this is a non-retryable error, return it to the user and
mark operation as permanently failed.
Related to neondatabase/cloud#4258
## Problem
In the logs, I noticed we still weren't retrying in some cases. Seemed
to be timeouts but we explicitly wanted to handle those
## Summary of changes
Retry on io::ErrorKind::TimedOut errors.
Handle IO errors in tokio_postgres::Error.
## Problem
It took me a while to understand the purpose of all the tasks spawned in
the main functions.
## Summary of changes
Utilising the type system and less macros, plus much more comments,
document the shutdown procedure of each task in detail
Recently we started doing sync-safekeepers before exiting compute_ctl,
expecting that it will make next sync faster by skipping recovery. But
recovery is still running in some cases
(https://github.com/neondatabase/neon/pull/4574#issuecomment-1629256166)
because of the lagging truncateLsn. This PR should help with updating
truncateLsn.
This addresses the issue in #4526 by adding a test that reproduces the
race condition that gave rise to the bug (or at least *a* race condition
that gave rise to the same error message), and then implementing a fix
that just prints a message to the log if a file could not been found for
uploading. Even though the underlying race condition is not fixed yet,
this will un-block the upload queue in that situation, greatly reducing
the impact of such a (rare) race.
Fixes#4526.
## Problem
Postgres submodule can be changed unintentionally, and these changes are
easy to miss during the review.
Adding a check that should prevent this from happening, the check fails
`build-neon` job with the following message:
```
Expected postgres-v14 rev to be at '1414141414141414141414141414141414141414', but it is at '1144aee1661c79eec65e784a8dad8bd450d9df79'
Expected postgres-v15 rev to be at '1515151515151515151515151515151515151515', but it is at '1984832c740a7fa0e468bb720f40c525b652835d'
Please update vendors/revisions.json if these changes are intentional.
```
This is an alternative approach to
https://github.com/neondatabase/neon/pull/4603
## Summary of changes
- Add `vendor/revisions.json` file with expected revisions
- Add built-time check (to `build-neon` job) that Postgres submodules
match revisions from `vendor/revisions.json`
- A couple of small improvements for logs from
https://github.com/neondatabase/neon/pull/4603
- Fixed GitHub autocomment for no tests was run case
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
The comment referenced an issue that was already closed. Remove that
reference and replace it with an explanation why we already don't print
an error.
See discussion in
https://github.com/neondatabase/neon/issues/2934#issuecomment-1626505916
For the TOCTOU fixes, the two calls after the `.exists()` both didn't
handle the situation well where the file was deleted after the initial
`.exists()`: one would assume that the path wasn't a file, giving a bad
error, the second would give an accurate error but that's not wanted
either.
We remove both racy `exists` and `is_file` checks, and instead just look
for errors about files not being found.
## Problem
If we fail to wake up the compute node, a subsequent connect attempt
will definitely fail. However, kubernetes won't fail the connection
immediately, instead it hangs until we timeout (10s).
## Summary of changes
Refactor the loop to allow fast retries of compute_wake and to skip a
connect attempt.
## Problem
Binaries created from PRs (both in docker images and for tests) have
wrong git-env versions, they point to phantom merge commits.
## Summary of changes
- Prefer GIT_VERSION env variable even if git information was accessible
- Use `${{ github.event.pull_request.head.sha || github.sha }}` instead
of `${{ github.sha }}` for `GIT_VERSION` in workflows
So the builds will still happen from this phantom commit, but we will
report the PR commit.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
part of https://github.com/neondatabase/neon/pull/4340
## Summary of changes
Remove LayerDescriptor and remove `todo!`. At the same time, this PR
adds `AsLayerDesc` trait for all persistent layers and changed
`LayerFileManager` to have a generic type. For tests, we are now using
`LayerObject`, which is a wrapper around `PersistentLayerDesc`.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
Before this PR, during shutdown, we'd find naked logs like this one for every active page service connection:
```
2023-07-05T14:13:50.791992Z INFO shutdown request received in run_message_loop
```
This PR
1. adds a peer_addr span field to distinguish the connections in logs
2. sets the tenant_id / timeline_id fields earlier
It would be nice to have `tenant_id` and `timeline_id` directly on
the `page_service_conn_main` span (empty, initially), then set
them at the top of `process_query`.
The problem is that the debug asserts for `tenant_id` and
`timeline_id` presence in the tracing span doesn't support
detecting empty values [1].
So, I'm a bit hesitant about over-using `Span::record`.
[1] https://github.com/neondatabase/neon/issues/4676
We see the following log lines occasionally in prod:
```
kill_and_wait_impl{pid=1983042}: wait successful exit_status=signal: 9 (SIGKILL)
```
This PR makes it easier to find the tenant for the pid, by including the
tenant id as a field in the span.
It started from few config methods that have various orderings and
sometimes use references sometimes not. So I unified path manipulation
methods to always order tenant_id before timeline_id and use referenced
because we dont need owned values.
Similar changes happened to call-sites of config methods.
I'd say its a good idea to always order tenant_id before timeline_id so
it is consistent across the whole codebase.
## Problem
`docker build ... -f Dockerfile.compute-node ...` fails on ARM (I'm
checking on macOS).
## Summary of changes
- Download the arm version of cmake on arm
## Problem
#4598 compute nodes are not accessible some time after wake up due to
kubernetes DNS not being fully propagated.
## Summary of changes
Update connect retry mechanism to support handling IO errors and
sleeping for 100ms
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Problem
I was reading the code of the page server today and found these minor
things that I thought could be cleaned up.
## Summary of changes
* remove a redundant indentation layer and continue in the flushing loop
* use the builtin `PartialEq` check instead of hand-rolling a `range_eq`
function
* Add a missing `>` to a prominent doc comment
General Rust Write trait semantics (as well as its async brother) is that write
definitely happens only after Write::flush(). This wasn't needed in sync where
rust write calls the syscall directly, but is required in async.
Also fix setting initial end_pos in walsender, sometimes it was from the future.
fixes https://github.com/neondatabase/neon/issues/4518
## Problem
Compute is not always able to reconnect to pages server.
First of all it caused by long time of restart of pageserver.
So number of attempts is increased from 5 (hardcoded) to 60 (GUC).
Also we do not perform flush after each command to increase performance
(it is especially critical for prefetch).
Unfortunately such pending flush makes it not possible to transparently
reconnect to restarted pageserver.
What we can do is to try to minimzie such probabilty.
Most likely broken connection will be detected in first sens command
after some idle period.
This is why max_flush_delay parameter is added which force flush to be
performed after first request after some idle period.
See #4497
## Summary of changes
Add neon.max_reconnect_attempts and neon.max_glush_delay GUCs which
contol when flush has to be done
and when it is possible to try to reconnect to page server
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
- Running the command according to docker.md gives warning and error.
- Warning `permissions should be u=rw (0600) or less` is output when
executing `psql -h localhost -p 55433 -U cloud_admin`.
- `FATAL: password authentication failed for user "root”` is output in
compute logs.
## Summary of changes
- Add `$ chmod 600 ~/.pgpass` in docker.md to avoid warning.
- Add username (cloud_admin) to pg_isready command in docker-compose.yml
to avoid error.
---------
Co-authored-by: Tomoka Hayashi <tomoka.hayashi@ntt.com>
```
CREATE EXTENSION embedding;
CREATE TABLE t (val real[]);
INSERT INTO t (val) VALUES ('{0,0,0}'), ('{1,2,3}'), ('{1,1,1}'), (NULL);
CREATE INDEX ON t USING hnsw (val) WITH (maxelements = 10, dims=3, m=3);
INSERT INTO t (val) VALUES (array[1,2,4]);
SELECT * FROM t ORDER BY val <-> array[3,3,3];
val
---------
{1,2,3}
{1,2,4}
{1,1,1}
{0,0,0}
(5 rows)
```
Does three things:
* add a `Display` impl for `LayerFileName` equal to the `short_id`
* based on that, replace the `Layer::short_id` function by a requirement
for a `Display` impl
* use that `Display` impl in the places where the `short_id` and `file_name()` functions were used instead
Fixes#4145
Looking at logs from staging and prod, I found there are a bunch of log
lines without tenant / timeline context.
Manully walk through all task_mgr::spawn lines and fix that using the
least amount of work required.
While doing it, remove some redundant `shutting down` messages.
refs https://github.com/neondatabase/neon/issues/4222
After announcing `hnsw`, there is a hypothesis that the community will
start comparing it with `pgvector` by themselves. Therefore, let's have
an actual version of `pgvector` in Neon.
Cache up to 20 connections per endpoint. Once all pooled connections
are used current implementation can open an extra connection, so the
maximum number of simultaneous connections is not enforced.
There are more things to do here, especially with background clean-up
of closed connections, and checks for transaction state. But current
implementation allows to check for smaller coonection latencies that
this cache should bring.
## Problem
HNSW index is created in memory.
Try to prevent OOM by checking of available RAM.
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
In case we try to connect to an outdated address that is no longer valid, the
default behavior of Kubernetes is to drop the packets, causing us to wait for
the entire timeout period. We want to fail fast in such cases.
A specific case to consider is when we have cached compute node information
with a 5-minute TTL (Time To Live), but the user has executed a `/suspend` API
call, resulting in the nonexistence of the compute node.
## Problem
While pbkdf2 is a simple algorithm, we should probably use a well tested
implementation
## Summary of changes
* Use pbkdf2 crate
* Use arrays like the hmac comment says
## Checklist before requesting a review
- [X] I have performed a self-review of my code.
- [X] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
This renames the `pageserver_tenant_synthetic_size` metric to
`pageserver_tenant_synthetic_cached_size_bytes`, as was requested on
slack (link in the linked issue).
* `_cached` to hint that it is not incrementally calculated
* `_bytes` to indicate the unit the size is measured in
Fixes#3748
## Problem
1. The local endpoints provision 2 ports (postgres and HTTP) which means
the migration_check endpoint has a different port than what the setup
implies
2. psycopg2-binary 2.9.3 has a deprecated poetry config and doesn't
install.
## Summary of changes
Update psycopg2-binary and update the endpoint ports in the readme
---------
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
Allure does not support ansi colored logs, yet `compute_ctl` has them.
Upgrade criterion to get rid of atty dependency, disable ansi colors,
remove atty dependency and disable ansi feature of tracing-subscriber.
This is a heavy-handed approach. I am not aware of a workflow where
you'd want to connect a terminal directly to for example `compute_ctl`,
usually you find the logs in a file. If someone had been using colors,
they will now need to:
- turn the `tracing-subscriber.default-features` to `true`
- edit their wanted project to have colors
I decided to explicitly disable ansi colors in case we would have in
future a dependency accidentally enabling the feature on
`tracing-subscriber`, which would be quite surprising but not
unimagineable.
By getting rid of `atty` from dependencies we get rid of
<https://github.com/advisories/GHSA-g98v-hv3f-hcfr>.
## Problem
All tests have already been parametrised by Postgres version and build
type (to have them distinguishable in the Allure report), but despite
it, it's anyway required to have DEFAULT_PG_VERSION and BUILD_TYPE env
vars set to corresponding values, for example to
run`test_timeline_deletion_with_files_stuck_in_upload_queue[release-pg14-local_fs]`
test it's required to set `DEFAULT_PG_VERSION=14` and
`BUILD_TYPE=release`.
This PR makes the test framework pick up parameters from the test name
itself.
## Summary of changes
- Postgres version and build type related fixtures now are
function-scoped (instead of being sessions scoped before)
- Deprecate `--pg-version` argument in favour of DEFAULT_PG_VERSION env
variable (it's easier to parse)
- GitHub autocomment now includes only one command with all the failed
tests + runs them in parallel
## Problem
#4528
## Summary of changes
Add a 60 seconds default timeout to the reqwest client
Add retries for up to 3 times to call into the metric consumption
endpoint
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Prod logs have deep accidential span nesting. Introduced in #3759 and
has been untouched since, maybe no one watches proxy logs? :) I found it
by accident when looking to see if proxy logs have ansi colors with
`{neon_service="proxy"}`.
The solution is to mostly stop using `Span::enter` or `Span::entered` in
async code. Kept on `Span::entered` in cancel on shutdown related path.
## Problem
Message "set local file cache limit to..." polutes compute logs.
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Co-authored-by: Konstantin Knizhnik <knizhnik@neon.tech>
## Problem
part of https://github.com/neondatabase/neon/issues/4392, continuation
of https://github.com/neondatabase/neon/pull/4408
## Summary of changes
This PR removes all layer objects from LayerMap and moves it to the
timeline struct. In timeline struct, LayerFileManager maps a layer
descriptor to a layer object, and it is stored in the same RwLock as
LayerMap to avoid behavior difference.
Key changes:
* LayerMap now does not have generic, and only stores descriptors.
* In Timeline, we add a new struct called layer mapping.
* Currently, layer mapping is stored in the same lock with layer map.
Every time we retrieve data from the layer map, we will need to map the
descriptor to the actual object.
* Replace_historic is moved to layer mapping's replace, and the return
value behavior is different from before. I'm a little bit unsure about
this part and it would be good to have some comments on that.
* Some test cases are rewritten to adapt to the new interface, and we
can decide whether to remove it in the future because it does not make
much sense now.
* LayerDescriptor is moved to `tests` module and should only be intended
for unit testing / benchmarks.
* Because we now have a usage pattern like "take the guard of lock, then
get the reference of two fields", we want to avoid dropping the
incorrect object when we intend to unlock the lock guard. Therefore, a
new set of helper function `drop_r/wlock` is added. This can be removed
in the future when we finish the refactor.
TODOs after this PR: fully remove RemoteLayer, and move LayerMapping to
a separate LayerCache.
all refactor PRs:
```
#4437 --- #4479 ------------ #4510 (refactor done at this point)
\-- #4455 -- #4502 --/
```
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
There is a magic number about how often we repartition and therefore
affecting how often we compact. This PR makes this number `10` a global
constant and add docs.
---------
Signed-off-by: Alex Chi Z <chi@neon.tech>
## Problem
We want to have a number of custom extensions that will not be available
by default, as an example of such is [Postgres
Anonymizer](https://postgresql-anonymizer.readthedocs.io/en/stable/)
(please note that the extension should be added to
`shared_preload_libraries`). To distinguish them, custom extensions
should be added to a different S3 path:
```
s3://<bucket>/<release version>/<postgres_version>/<ext_name>/share/extensions/
s3://<bucket>/<release version>/<postgres_version>/<ext_name>/lib
where <ext_name> is an extension name
```
Resolves https://github.com/neondatabase/neon/issues/4582
## Summary of changes
- Add Postgres Anonymizer extension to Dockerfile (it's included only to
postgres-extensions target)
- Build extensions image from postgres-extensions target in a workflow
- Upload custom extensions to S3 (different directory)
When we use local SSD for bench and create `.neon` directory before we
do `cargo neon init`, the initialization process will error due to
directory already exists. This PR adds a flag `--force` that removes
everything inside the directory if `.neon` already exists.
---------
Signed-off-by: Alex Chi Z. <chi@neon.tech>
## Problem
See #4516
Inspecting log it is possible to notice that if lwlsn is set to the
beginning of applied WAL record, then
incorrect version of the page is loaded:
```
2023-06-27 18:36:51.930 GMT [3273945] CONTEXT: WAL redo at 0/14AF6F0 for Heap/INSERT: off 2 flags 0x01; blkref #0: rel 1663/5/1259, blk 0 FPW
2023-06-27 18:36:51.930 GMT [3273945] LOG: Do REDO block 0 of rel 1663/5/1259 fork 0 at LSN 0/**014AF6F0**..0/014AFA60
2023-06-27 18:37:02.173 GMT [3273963] LOG: Read blk 0 in rel 1663/5/1259 fork 0 (request LSN 0/**014AF6F0**): lsn=0/**0143C7F8** at character 22
2023-06-27 18:37:47.780 GMT [3273945] LOG: apply WAL record at 0/1BB8F38 xl_tot_len=188, xl_prev=0/1BB8EF8
2023-06-27 18:37:47.780 GMT [3273945] CONTEXT: WAL redo at 0/1BB8F38 for Heap/INPLACE: off 2; blkref #0: rel 1663/5/1259, blk 0
2023-06-27 18:37:47.780 GMT [3273945] LOG: Do REDO block 0 of rel 1663/5/1259 fork 0 at LSN 0/01BB8F38..0/01BB8FF8
2023-06-27 18:37:47.780 GMT [3273945] CONTEXT: WAL redo at 0/1BB8F38 for Heap/INPLACE: off 2; blkref #0: rel 1663/5/1259, blk 0
2023-06-27 18:37:47.780 GMT [3273945] PANIC: invalid lp
```
## Summary of changes
1. Use end record LSN for both cases
2. Update lwlsn for relation metadata
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
We want to store Postgres Extensions in S3 (resolves
https://github.com/neondatabase/neon/issues/4493).
Proposed solution:
- Create a separate docker image (from scratch) that contains only
extensions
- Do not include extensions into compute-node (except for neon
extensions)*
- For release and main builds upload extract extension from the image
and upload to S3 (`s3://<bucket>/<release
version>/<postgres_version>/...`)**
*) We're not doing it until the feature is not fully implemented
**) This differs from the initial proposal in
https://github.com/neondatabase/neon/issues/4493 of putting extensions
straight into `s3://<bucket>/<postgres_version>/...`, because we can't
upload directory atomicly. A drawback of this is that we end up with
unnecessary copies of files ~2.1 GB per release (i.e. +2.1 GB for each
commit in main also). We don't really need to update extensions for each
release if there're no relevant changes, but this requires extra work.
## Summary of changes
- Created a separate stage in Dockerfile.compute-node
`postgres-extensions` that contains only extensions
- Added a separate step in a workflow that builds `postgres-extensions`
image (because of a bug in kaniko this step is commented out because it
takes way too long to get built)
- Extract extensions from the image and upload files to S3 for release
and main builds
- Upload extenstions only for staging (for now)
## Problem
Lets keep 500 for unusual stuff that is not considered normal. Came up
during one of the discussions around console logs now seeing this 500's.
## Summary of changes
- Return 409 Conflict instead of 500
- Remove 200 ok status because it is not used anymore
This PR concludes the "async `Layer::get_value_reconstruct_data`"
project.
The problem we're solving is that, before this patch, we'd execute
`Layer::get_value_reconstruct_data` on the tokio executor threads.
This function is IO- and/or CPU-intensive.
The IO is using VirtualFile / std::fs; hence it's blocking.
This results in unfairness towards other tokio tasks, especially under
(disk) load.
Some context can be found at
https://github.com/neondatabase/neon/issues/4154
where I suspect (but can't prove) load spikes of logical size
calculation to
cause heavy eviction skew.
Sadly we don't have tokio runtime/scheduler metrics to quantify the
unfairness.
But generally, we know blocking the executor threads on std::fs IO is
bad.
So, let's have this change and watch out for severe perf regressions in
staging & during rollout.
## Changes
* rename `Layer::get_value_reconstruct_data` to
`Layer::get_value_reconstruct_data_blocking`
* add a new blanket impl'd `Layer::get_value_reconstruct_data`
`async_trait` method that runs `get_value_reconstruct_data_blocking`
inside `spawn_blocking`.
* The `spawn_blocking` requires `'static` lifetime of the captured
variables; hence I had to change the data flow to _move_ the
`ValueReconstructState` into and back out of get_value_reconstruct_data
instead of passing a reference. It's a small struct, so I don't expect a
big performance penalty.
## Performance
Fundamentally, the code changes cause the following performance-relevant
changes:
* Latency & allocations: each `get_value_reconstruct_data` call now
makes a short-lived allocation because `async_trait` is just sugar for
boxed futures under the hood
* Latency: `spawn_blocking` adds some latency because it needs to move
the work to a thread pool
* using `spawn_blocking` plus the existing synchronous code inside is
probably more efficient better than switching all the synchronous code
to tokio::fs because _each_ tokio::fs call does `spawn_blocking` under
the hood.
* Throughput: the `spawn_blocking` thread pool is much larger than the
async executor thread pool. Hence, as long as the disks can keep up,
which they should according to AWS specs, we will be able to deliver
higher `get_value_reconstruct_data` throughput.
* Disk IOPS utilization: we will see higher disk utilization if we get
more throughput. Not a problem because the disks in prod are currently
under-utilized, according to node_exporter metrics & the AWS specs.
* CPU utilization: at higher throughput, CPU utilization will be higher.
Slightly higher latency under regular load is acceptable given the
throughput gains and expected better fairness during disk load peaks,
such as logical size calculation peaks uncovered in #4154.
## Full Stack Of Preliminary PRs
This PR builds on top of the following preliminary PRs
1. Clean-ups
* https://github.com/neondatabase/neon/pull/4316
* https://github.com/neondatabase/neon/pull/4317
* https://github.com/neondatabase/neon/pull/4318
* https://github.com/neondatabase/neon/pull/4319
* https://github.com/neondatabase/neon/pull/4321
* Note: these were mostly to find an alternative to #4291, which I
thought we'd need in my original plan where we would need to convert
`Tenant::timelines` into an async locking primitive (#4333). In reviews,
we walked away from that, but these cleanups were still quite useful.
2. https://github.com/neondatabase/neon/pull/4364
3. https://github.com/neondatabase/neon/pull/4472
4. https://github.com/neondatabase/neon/pull/4476
5. https://github.com/neondatabase/neon/pull/4477
6. https://github.com/neondatabase/neon/pull/4485
7. https://github.com/neondatabase/neon/pull/4441
The stats for `compact_level0_phase` that I added in #4527 show the
following breakdown (24h data from prod, only looking at compactions
with > 1 L1 produced):
* 10%ish of wall-clock time spent between the two read locks
* I learned that the `DeltaLayer::iter()` and `DeltaLayer::key_iter()`
calls actually do IO, even before we call `.next()`. I suspect that is
why they take so much time between the locks.
* 80+% of wall-clock time spent writing layer files
* Lock acquisition time is irrelevant (low double-digit microseconds at
most)
* The generation of the holes holds the read lock for a relatively long
time and it's proportional to the amount of keys / IO required to
iterate over them (max: 110ms in prod; staging (nightly benchmarks):
multiple seconds).
Find below screenshots from my ad-hoc spreadsheet + some graphs.
<img width="1182" alt="image"
src="https://github.com/neondatabase/neon/assets/956573/81398b3f-6fa1-40dd-9887-46a4715d9194">
<img width="901" alt="image"
src="https://github.com/neondatabase/neon/assets/956573/e4ac0393-f2c1-4187-a5e5-39a8b0c394c9">
<img width="210" alt="image"
src="https://github.com/neondatabase/neon/assets/956573/7977ade7-6aa5-4773-a0a2-f9729aecee0d">
## Changes In This PR
This PR makes the following changes:
* rearrange the `compact_level0_phase1` code such that we build the
`all_keys_iter` and `all_values_iter` later than before
* only grab the `Timeline::layers` lock once, and hold it until we've
computed the holes
* run compact_level0_phase1 in spawn_blocking, pre-grabbing the
`Timeline::layers` lock in the async code and passing it in as an
`OwnedRwLockReadGuard`.
* the code inside spawn_blocking drops this guard after computing the
holds
* the `OwnedRwLockReadGuard` requires the `Timeline::layers` to be
wrapped in an `Arc`. I think that's Ok, the locking for the RwLock is
more heavy-weight than an additional pointer indirection.
## Alternatives Considered
The naive alternative is to throw the entire function into
`spawn_blocking`, and use `blocking_read` for `Timeline::layers` access.
What I've done in this PR is better because, with this alternative,
1. while we `blocking_read()`, we'd waste one slot in the spawn_blocking
pool
2. there's deadlock risk because the spawn_blocking pool is a finite
resource
## Metadata
Fixes https://github.com/neondatabase/neon/issues/4492
## Problem
Currently, if a user creates a role, it won't by default have any grants
applied to it. If the compute restarts, the grants get applied. This
gives a very strange UX of being able to drop roles/not have any access
to anything at first, and then once something triggers a config
application, suddenly grants are applied. This removes these grants.
This is follow-up to
```
commit 2252c5c282
Author: Alex Chi Z <iskyzh@gmail.com>
Date: Wed Jun 14 17:12:34 2023 -0400
metrics: convert some metrics to pageserver-level (#4490)
```
The consumption metrics synthetic size worker does logical size
calculation. Logical size calculation currently does synchronous disk
IO. This blocks the MGMT_REQUEST_RUNTIME's executor threads, starving
other futures.
While there's work on the way to move the synchronous disk IO into
spawn_blocking, the quickfix here is to use the BACKGROUND_RUNTIME
instead of MGMT_REQUEST_RUNTIME.
Actually it's not just a quickfix. We simply shouldn't be blocking
MGMT_REQUEST_RUNTIME executor threads on CPU or sync disk IO.
That work isn't done yet, as many of the mgmt tasks still _do_ disk IO.
But it's not as intensive as the logical size calculations that we're
fixing here.
While we're at it, fix disk-usage-based eviction in a similar way. It
wasn't the culprit here, according to prod logs, but it can
theoretically be a little CPU-intensive.
More context, including graphs from Prod:
https://neondb.slack.com/archives/C03F5SM1N02/p1687541681336949
Doc says that it should be added into `shared_preload_libraries`, but,
practically, it's not required.
```
postgres=# create extension pg_uuidv7;
CREATE EXTENSION
postgres=# SELECT uuid_generate_v7();
uuid_generate_v7
--------------------------------------
0188e823-3f8f-796c-a92c-833b0b2d1746
(1 row)
```
The histogram distinguishes by ok/err.
I took the liberty to create a small abstraction for such use cases.
It helps keep the label values inside `metrics.rs`, right next
to the place where the metric and its labels are declared.
## Problem
A git tag for a release has an extra `release-` prefix (it looks like
`release-release-3439`).
## Summary of changes
- Do not add `release-` prefix when create git tag
## Problem
In the test environment vacuum duration fluctuates from ~1h to ~5h, along
with another two 1h benchmarks (`select-only` and `simple-update`) it
could be up to 7h which is longer than 6h timeout.
## Summary of changes
- Increase timeout for pgbench-compare job to 8h
- Remove 6h timeouts from Nightly Benchmarks (this is a default value)
* `compaction_threshold` should be an integer, not a string.
* uncomment `[section]` so that if a user needs to modify the config,
they can simply uncomment the corresponding line. Otherwise it's easy
for us to forget uncommenting the `[section]` when uncommenting the
config item we want to configure.
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Commit
```
commit 472cc17b7a
Author: Dmitry Rodionov <dmitry@neon.tech>
Date: Thu Jun 15 17:30:12 2023 +0300
propagate lock guard to background deletion task (#4495)
```
did a drive-by fix, but, the drive-by had a typo.
```
gc_loop{tenant_id=2e2f2bff091b258ac22a4c4dd39bd25d}:update_gc_info{timline_id=837c688fd37c903639b9aa0a6dd3f1f1}:download_remote_layer{layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000024DA0D1-000000000443FB51}:panic{thread=background op worker location=pageserver/src/tenant/timeline.rs:4843:25}: missing extractors: ["TimelineId"]
Stack backtrace:
0: utils::logging::tracing_panic_hook
at /libs/utils/src/logging.rs:166:21
1: <alloc::boxed::Box<F,A> as core::ops::function::Fn<Args>>::call
at /rustc/9eb3afe9ebe9c7d2b84b71002d44f4a0edac95e0/library/alloc/src/boxed.rs:2002:9
2: std::panicking::rust_panic_with_hook
at /rustc/9eb3afe9ebe9c7d2b84b71002d44f4a0edac95e0/library/std/src/panicking.rs:692:13
3: std::panicking::begin_panic_handler::{{closure}}
at /rustc/9eb3afe9ebe9c7d2b84b71002d44f4a0edac95e0/library/std/src/panicking.rs:579:13
4: std::sys_common::backtrace::__rust_end_short_backtrace
at /rustc/9eb3afe9ebe9c7d2b84b71002d44f4a0edac95e0/library/std/src/sys_common/backtrace.rs:137:18
5: rust_begin_unwind
at /rustc/9eb3afe9ebe9c7d2b84b71002d44f4a0edac95e0/library/std/src/panicking.rs:575:5
6: core::panicking::panic_fmt
at /rustc/9eb3afe9ebe9c7d2b84b71002d44f4a0edac95e0/library/core/src/panicking.rs:64:14
7: pageserver::tenant::timeline::debug_assert_current_span_has_tenant_and_timeline_id
at /pageserver/src/tenant/timeline.rs:4843:25
8: <pageserver::tenant::timeline::Timeline>::download_remote_layer::{closure#0}::{closure#0}
at /pageserver/src/tenant/timeline.rs:4368:9
9: <tracing::instrument::Instrumented<<pageserver::tenant::timeline::Timeline>::download_remote_layer::{closure#0}::{closure#0}> as core::future::future::Future>::poll
at /.cargo/registry/src/github.com-1ecc6299db9ec823/tracing-0.1.37/src/instrument.rs:272:9
10: <pageserver::tenant::timeline::Timeline>::download_remote_layer::{closure#0}
at /pageserver/src/tenant/timeline.rs:4363:5
11: <pageserver::tenant::timeline::Timeline>::get_reconstruct_data::{closure#0}
at /pageserver/src/tenant/timeline.rs:2618:69
12: <pageserver::tenant::timeline::Timeline>::get::{closure#0}
at /pageserver/src/tenant/timeline.rs:565:13
13: <pageserver::tenant::timeline::Timeline>::list_slru_segments::{closure#0}
at /pageserver/src/pgdatadir_mapping.rs:427:42
14: <pageserver::tenant::timeline::Timeline>::is_latest_commit_timestamp_ge_than::{closure#0}
at /pageserver/src/pgdatadir_mapping.rs:390:13
15: <pageserver::tenant::timeline::Timeline>::find_lsn_for_timestamp::{closure#0}
at /pageserver/src/pgdatadir_mapping.rs:338:17
16: <pageserver::tenant::timeline::Timeline>::update_gc_info::{closure#0}::{closure#0}
at /pageserver/src/tenant/timeline.rs:3967:71
17: <tracing::instrument::Instrumented<<pageserver::tenant::timeline::Timeline>::update_gc_info::{closure#0}::{closure#0}> as core::future::future::Future>::poll
at /.cargo/registry/src/github.com-1ecc6299db9ec823/tracing-0.1.37/src/instrument.rs:272:9
18: <pageserver::tenant::timeline::Timeline>::update_gc_info::{closure#0}
at /pageserver/src/tenant/timeline.rs:3948:5
19: <pageserver::tenant::Tenant>::refresh_gc_info_internal::{closure#0}
at /pageserver/src/tenant.rs:2687:21
20: <pageserver::tenant::Tenant>::gc_iteration_internal::{closure#0}
at /pageserver/src/tenant.rs:2551:13
21: <pageserver::tenant::Tenant>::gc_iteration::{closure#0}
at /pageserver/src/tenant.rs:1490:13
22: pageserver::tenant::tasks::gc_loop::{closure#0}::{closure#0}
at /pageserver/src/tenant/tasks.rs:187:21
23: pageserver::tenant::tasks::gc_loop::{closure#0}
at /pageserver/src/tenant/tasks.rs:208:5
```
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Problem
During timeline creation we create special mark file which presense
indicates that initialization didnt complete successfully. In case of a
crash restart we can remove such half-initialized timeline and following
retry from control plane side should perform another attempt.
So in case of a possible crash restart during initial loading we have
following picture:
```
timelines
| - <timeline_id>___uninit
| - <timeline_id>
| - | <timeline files>
```
We call `std::fs::read_dir` to walk files in `timelines` directory one
by one. If we see uninit file
we proceed with deletion of both, timeline directory and uninit file. If
we see timeline we check if uninit file exists and do the same cleanup.
But in fact its possible to get both branches to be true at the same
time. Result of readdir doesnt reflect following directory state
modifications. So you can still get "valid" entry on the next iteration
of the loop despite the fact that it was deleted in one of the previous
iterations of the loop.
To see that you can apply the following patch (it disables uninit mark
cleanup on successful timeline creation):
```diff
diff --git a/pageserver/src/tenant.rs b/pageserver/src/tenant.rs
index 4beb2664..b3cdad8f 100644
--- a/pageserver/src/tenant.rs
+++ b/pageserver/src/tenant.rs
@@ -224,11 +224,6 @@ impl UninitializedTimeline<'_> {
)
})?;
}
- uninit_mark.remove_uninit_mark().with_context(|| {
- format!(
- "Failed to remove uninit mark file for timeline {tenant_id}/{timeline_id}"
- )
- })?;
v.insert(Arc::clone(&new_timeline));
new_timeline.maybe_spawn_flush_loop();
```
And perform the following steps:
```bash
neon_local init
neon_local start
neon_local tenant create
neon_local stop
neon_local start
```
The error is:
```log
INFO load{tenant_id=X}:blocking: Found an uninit mark file .neon/tenants/X/timelines/Y.___uninit, removing the timeline and its uninit mark
2023-06-09T18:43:41.664247Z ERROR load{tenant_id=X}: load failed, setting tenant state to Broken: failed to load metadata
Caused by:
0: Failed to read metadata bytes from path .neon/tenants/X/timelines/Y/metadata
1: No such file or directory (os error 2)
```
So uninit mark got deleted together with timeline directory but we still
got directory entry for it and tried to load it.
The bug prevented tenant from being successfully loaded.
## Summary of changes
Ideally I think we shouldnt place uninit marks in the same directory as timeline directories but move them to separate directory and
gather them as an input to actual listing, but that would be sort of an
on-disk format change, so just check whether entries are still valid
before operating on them.
The data will help decide whether it's ok
to keep holding Timeline::layers in shared mode until
after we've calculated the holes.
Other timings are to understand the general breakdown
of timings in that function.
Context: https://github.com/neondatabase/neon/issues/4492
I observe sporadic reconnections with ~10k idle computes. It looks like a
separate issue, probably walreceiver runtime gets blocked somewhere, but in any
case 2-3 seconds is too small.
## Problem
`pytest-timeout` and `pytest-rerunfailures` are incompatible (or rather
not fully compatible). Timeouts aren't set for reruns.
Ref https://github.com/pytest-dev/pytest-rerunfailures/issues/99
## Summary of changes
- Dynamically make timeouts `func_only` for tests that we're going to
retry. It applies timeouts for reruns as well.
## Problem
1. During the rollout we got a panic: "timeline that we were deleting
was concurrently removed from 'timelines' map" that was caused by lock
guard not being propagated to the background part of the deletion.
Existing test didnt catch it because failpoint that was used for
verification was placed earlier prior to background task spawning.
2. When looking at surrounding code one more bug was detected. We
removed timeline from the map before deletion is finished, which breaks
client retry logic, because it will indicate 404 before actual deletion
is completed which can lead to client stopping its retry poll earlier.
## Summary of changes
1. Carry the lock guard over to background deletion. Ensure existing
test case fails without applied patch (second deletion becomes stuck
without it, which eventually leads to a test failure).
2. Move delete_all call earlier so timeline is removed from the map is
the last thing done during deletion.
Additionally I've added timeline_id to the `update_gc_info` span,
because `debug_assert_current_span_has_tenant_and_timeline_id` in
`download_remote_layer` was firing when `update_gc_info` lead to
on-demand downloads via `find_lsn_for_timestamp` (caught by @problame).
This is not directly related to the PR but fixes possible flakiness.
Another smaller set of changes involves deletion wrapper used in python
tests. Now there is a simpler wrapper that waits for deletions to
complete `timeline_delete_wait_completed`. Most of the
test_delete_timeline.py tests make negative tests, i.e., "does
ps_http.timeline_delete() fail in this and that scenario".
These can be left alone. Other places when we actually do the deletions,
we need to use the helper that polls for completion.
Discussion
https://neondb.slack.com/archives/C03F5SM1N02/p1686668007396639resolves#4496
---------
Co-authored-by: Christian Schwarz <christian@neon.tech>
Default value for `wal_acceptor_reconnect_timeout` was changed in
https://github.com/neondatabase/neon/pull/4428 and it affected
performance up to 20% in some cases.
Revert the value back.
## Problem
When I switched `psycopg2.connect` from context manager to a regular
function call in https://github.com/neondatabase/neon/pull/4382 I
embarrassingly forgot about commit, so it doesn't really put data into DB 😞
## Summary of changes
- Enable autocommit for data ingestion scripts
## Problem
Some metrics are better to be observed at page-server level. Otherwise,
as we have a lot of tenants in production, we cannot do a sum b/c
Prometheus has limit on how many time series we can aggregate. This also
helps reduce metrics scraping size.
## Summary of changes
Some integration tests are likely not to pass as it will check the
existence of some metrics. Waiting for CI complete and fix them.
Metrics downgraded: page cache hit (where we are likely to have a
page-server level page cache in the future instead of per-tenant), and
reconstruct time (this would better be tenant-level, as we have one pg
replayer for each tenant, but now we make it page-server level as we do
not need that fine-grained data).
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
## Problem
`neon-image-depot` is an experimental job we use to compare with the
main `neon-image` job.
But it's not stable and right now we don't have the capacity to properly
fix and evaluate it.
We can come back to this later.
## Summary of changes
Remove `neon-image-depot` job
HTTP queries failed with errors `error connecting to server: failed to
lookup address information: Name or service not known\n\nCaused by:\n
failed to lookup address information: Name or service not known`
The fix reused cache invalidation logic in proxy from usual postgres
connections and added it to HTTP-over-SQL queries.
Also removed a timeout for HTTP request, because it almost never worked
on staging (50s+ time just to start the compute), and we can have the
similar case in production. Should be ok, since we have a limits for the
requests and responses.
## Problem
If the script fails to generate a test summary, the step also fails the
job/workflow (despite this could be a non-fatal problem).
## Summary of changes
- Separate JSON parsing and summarisation into separate functions
- Wrap functions calling into try..catch block, add an error message to
GitHub comment and do not fail the step
- Make `scripts/comment-test-report.js` a CLI script that can be run
locally (mock GitHub calls) to make it easier to debug issues locally
This is preliminary work for/from #4220 (async `Layer::get_value_reconstruct_data`).
# Full Stack Of Preliminary PRs
Thanks to the countless preliminary PRs, this conversion is relatively
straight-forward.
1. Clean-ups
* https://github.com/neondatabase/neon/pull/4316
* https://github.com/neondatabase/neon/pull/4317
* https://github.com/neondatabase/neon/pull/4318
* https://github.com/neondatabase/neon/pull/4319
* https://github.com/neondatabase/neon/pull/4321
* Note: these were mostly to find an alternative to #4291, which I
thought we'd need in my original plan where we would need to convert
`Tenant::timelines` into an async locking primitive (#4333). In reviews,
we walked away from that, but these cleanups were still quite useful.
2. https://github.com/neondatabase/neon/pull/4364
3. https://github.com/neondatabase/neon/pull/4472
4. https://github.com/neondatabase/neon/pull/4476
5. https://github.com/neondatabase/neon/pull/4477
6. https://github.com/neondatabase/neon/pull/4485
# Significant Changes In This PR
## `compact_level0_phase1` & `create_delta_layer`
This commit partially reverts
"pgserver: spawn_blocking in compaction (#4265)"
4e359db4c7.
Specifically, it reverts the `spawn_blocking`-ificiation of
`compact_level0_phase1`.
If we didn't revert it, we'd have to use `Timeline::layers.blocking_read()`
inside `compact_level0_phase1`. That would use up a thread in the
`spawn_blocking` thread pool, which is hard-capped.
I considered wrapping the code that follows the second
`layers.read().await` into `spawn_blocking`, but there are lifetime
issues with `deltas_to_compact`.
Also, this PR switches the `create_delta_layer` _function_ back to
async, and uses `spawn_blocking` inside to run the code that does sync
IO, while keeping the code that needs to lock `Timeline::layers` async.
## `LayerIter` and `LayerKeyIter` `Send` bounds
I had to add a `Send` bound on the `dyn` type that `LayerIter`
and `LayerKeyIter` wrap. Why? Because we now have the second
`layers.read().await` inside `compact_level0_phase`, and these
iterator instances are held across that await-point.
More background:
https://github.com/neondatabase/neon/pull/4462#issuecomment-1587376960
## `DatadirModification::flush`
Needed to replace the `HashMap::retain` with a hand-rolled variant
because `TimelineWriter::put` is now async.
This is preliminary work for/from #4220 (async
`Layer::get_value_reconstruct_data`).
Or more specifically, #4441, where we turn Timeline::layers into a
tokio::sync::RwLock.
By using try_write() here, we can avoid turning init_empty_layer_map
async,
which is nice because much of its transitive call(er) graph isn't async.
This is preliminary work for/from #4220 (async
`Layer::get_value_reconstruct_data`).
There, we want to switch `Timeline::layers` to be a
`tokio::sync::RwLock`.
That will require the `TimelineWriter` to become async, because at times
its functions need to lock `Timeline::layers` in order to freeze the
open layer.
While doing that, rustc complains that we're now holding
`Timeline::write_lock` across await points (lock order is that
`write_lock` must be acquired before `Timelines::layers`).
So, we need to switch it over to an async primitive.
This is preliminary work for/from #4220 (async
`Layer::get_value_reconstruct_data`).
There, we want to switch `Timeline::layers` to be a
`tokio::sync::RwLock`.
That will require the `TimelineWriter` to become async.
That will require `freeze_inmem_layer` to become async.
So, inside check_checkpoint_distance, we will have
`freeze_inmem_layer().await`.
But current rustc isn't smart enough to understand that we
`drop(layers)` earlier, and hence, will complain about the `!Send`
`layers` being held across the `freeze_inmem_layer().await`-point.
This patch puts the guard into a scope, so rustc will shut up in the
next patch where we make the transition for `TimelineWriter`.
obsoletes https://github.com/neondatabase/neon/pull/4474
c058e1cec2 skipped `truncate_wal()` it if `write_lsn` is equal to
truncation position, but didn't took into account that `write_lsn` is
reset on restart.
Fixes regression looking like:
```
ERROR WAL acceptor{cid=22 ...}:panic{thread=WAL acceptor 19b6c1743666ec02991a7633c57178db/b07db8c88f4c76ea5ed0954c04cc1e74 location=safekeeper/src/wal_storage.rs:230:13}: unexpected write into non-partial segment file
```
This fix will prevent skipping WAL truncation when we are running for
the first time after restart.
Commit `create_test_timeline: always put@initdb_lsn the minimum required keys`
already switched us over to using valid initdb_lsns.
All that's left to do is to actually flush the minimum keys so that
we move from disk_consistent_lsn=Lsn(0) to disk_consistent_lsn=initdb_lsn.
Co-authored-by: Christian Schwarz <christian@neon.tech>
Part of https://github.com/neondatabase/neon/pull/4364
Clarify who's responsible for initializing the layer map. There were
previously two different ways to do it:
- create_empty_timeline and bootstrap_timeline let prepare_timeline()
initialize an empty layer map.
- branch_timeline passed a flag to initialize_with_lock() to tell
initialize_with_lock to call load_layer_map(). Because it was a
newly created timeline, load_layer_map() never found any layer
files, so it just initialized an empty layer map.
With this commit, prepare_new_timeline() always does it. The LSN to
initialize it with is passed as argument.
Other changes per function:
prepare_timeline:
- rename to 'prepare_new_timeline' to make it clear that it's only used
when creating a new timeline, not when loading an existing timeline
- always initialize an empty layer map. The caller can pass the LSN to
initialize it with. (Previously, prepare_timeline would optionally
load the layer map at 'initdb_lsn'. Some caller used that, while others
let initialize_with_lock do it
initialize_with_lock:
- As mentioned above, remove the option to load the layer map
- Acquire the 'timelines' lock in the function itself. None of the callers
did any other work while holding the lock.
- Rename it to finish_creation() to make its intent more clear. It's only
used when creating a new timeline now.
create_timeline_data:
- Rename to create_timeline_struct() for clarity. It just initializes
the Timeline struct, not any other "data"
create_timeline_files:
- use create_dir rather than create_dir_all, to be a little more strict.
We know that the parent directory should already exist, and the timeline
directory should not exist.
- Move the call to create_timeline_struct() to the caller. It was just
being "passed through"
Part of https://github.com/neondatabase/neon/pull/4364
This patch inlines `initialize_with_lock` and then reorganizes the code
such that we can `load_layer_map` without holding the
`Tenant::timelines` lock.
As a nice aside, we can get rid of the dummy() uninit mark, which has
always been a terrible hack.
Part of https://github.com/neondatabase/neon/pull/4364
This is a full switch, fs io operations are also tokio ones, working through
thread pool. Similar to pageserver, we have multiple runtimes for easier `top`
usage and isolation.
Notable points:
- Now that guts of safekeeper.rs are full of .await's, we need to be very
careful not to drop task at random point, leaving timeline in unclear
state. Currently the only writer is walreceiver and we don't have top
level cancellation there, so we are good. But to be safe probably we should
add a fuse panicking if task is being dropped while operation on a timeline
is in progress.
- Timeline lock is Tokio one now, as we do disk IO under it.
- Collecting metrics got a crutch: since prometheus Collector is
synchronous, it spawns a thread with current thread runtime collecting data.
- Anything involving closures becomes significantly more complicated, as
async fns are already kinda closures + 'async closures are unstable'.
- Main thread now tracks other main tasks, which got much easier.
- The only sync place left is initial data loading, as otherwise clippy
complains on timeline map lock being held across await points -- which is
not bad here as it happens only in single threaded runtime of main thread.
But having it sync doesn't hurt either.
I'm concerned about performance of thread pool io offloading, async traits and
many await points; but we can try and see how it goes.
fixes https://github.com/neondatabase/neon/issues/3036
fixes https://github.com/neondatabase/neon/issues/3966
## Problem
Part of https://github.com/neondatabase/neon/issues/4418
## Summary of changes
This PR implements the local manifest interfaces. After the refactor of
timeline is done, we can integrate this with the current storage. The
reader will stop at the first corrupted record.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
There were few problems with null handling:
* query_raw_txt() accepted vector of string so it always (erroneously)
treated "null" as a string instead of null. Change rust pg client
to accept the vector of Option<String> instead of just Strings. Adopt
coding here to pass nulls as None.
* pg_text_to_json() had a check that always interpreted "NULL" string
as null. That is wrong and nulls were already handled by match None.
This bug appeared as a bad attempt to parse arrays containing NULL
elements. Fix coding by checking presence of quotes while parsing an
array (no quotes -> null, quoted -> "null" string).
Array parser fix also slightly changes behavior by always cleaning
current entry when pushing to the resulting vector. This seems to be
an omission by previous coding, however looks like it was harmless
as entry was not cleared only at the end of the nested or to-level
array.
With this commit client can pass following optional headers:
`Neon-Raw-Text-Output: true`. Return postgres values as text, without parsing them. So numbers, objects, booleans, nulls and arrays will be returned as text. That can be useful in cases when client code wants to implement it's own parsing or reuse parsing libraries from e.g. node-postgres.
`Neon-Array-Mode: true`. Return postgres rows as arrays instead of objects. That is more compact representation and also helps in some edge
cases where it is hard to use rows represented as objects (e.g. when several fields have the same name).
Delete data from s3 when timeline deletion is requested
## Summary of changes
UploadQueue is altered to support scheduling of delete operations in
stopped state. This looks weird, and I'm thinking whether there are
better options/refactorings for upload client to make it look better.
Probably can be part of https://github.com/neondatabase/neon/issues/4378
Deletion is implemented directly in existing endpoint because changes are not
that significant. If we want more safety we can separate those or create
feature flag for new behavior.
resolves [#4193](https://github.com/neondatabase/neon/issues/4193)
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Problem
part of https://github.com/neondatabase/neon/issues/4392
## Summary of changes
This PR adds a new HashMap that maps persistent layer desc to the layer
object *inside* LayerMap. Originally I directly went towards adding such
layer cache in Timeline, but the changes are too many and cannot be
reviewed as a reasonably-sized PR. Therefore, we take this intermediate
step to change part of the codebase to use persistent layer desc, and
come up with other PRs to move this hash map of layer desc to the
timeline struct.
Also, file_size is now part of the layer desc.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
## Problem
Attach failures are not reported in public part of the api (in
`attachment_status` field of TenantInfo).
## Summary of changes
Expose TenantState::Broken as TenantAttachmentStatus::Failed
In the way its written Failed status will be reported even if no
attachment happened. (I e if tenant become broken on startup). This is
in line with other members. I e Active will be resolved to Attached even
if no actual attach took place.
This can be tweaked if needed. At the current stage it would be overengineering without clear motivation
resolves#4344
## Problem
close https://github.com/neondatabase/neon/issues/4266
## Summary of changes
With this PR, rust-analyzer should be able to give lints and auto
complete in `mod tests`, and this makes writing tests easier.
Previously, rust-analyzer cannot do auto completion.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
It should make remote_consistent_lsn commonly up-to-date on non actively writing
projects, which removes spike or pageserver -> safekeeper reconnections on
storage nodes restart.
Initial logical size calculation could still hinder our fast startup
efforts in #4397. See #4183. In deployment of 2023-06-06
about a 200 initial logical sizes were calculated on hosts which
took the longest to complete initial load (12s).
Implements the three step/tier initialization ordering described in
#4397:
1. load local tenants
2. do initial logical sizes per walreceivers for 10s
3. background tasks
Ordering is controlled by:
- waiting on `utils::completion::Barrier`s on background tasks
- having one attempt for each Timeline to do initial logical size
calculation
- `pageserver/src/bin/pageserver.rs` releasing background jobs after
timeout or completion of initial logical size calculation
The timeout is there just to safeguard in case a legitimate non-broken
timeline initial logical size calculation goes long. The timeout is
configurable, by default 10s, which I think would be fine for production
systems. In the test cases I've been looking at, it seems that these
steps are completed as fast as possible.
Co-authored-by: Christian Schwarz <christian@neon.tech>
This adds test coverage for 'compute_ctl', as it is now used by all
the python tests.
There are a few differences in how 'compute_ctl' is called in the
tests, compared to the real web console:
- In the tests, the postgresql.conf file is included as one large
string in the spec file, and it is written out as it is to the data
directory. I added a new field for that to the spec file. The real
web console, however, sets all the necessary settings in the
'settings' field, and 'compute_ctl' creates the postgresql.conf from
those settings.
- In the tests, the information needed to connect to the storage, i.e.
tenant_id, timeline_id, connection strings to pageserver and
safekeepers, are now passed as new fields in the spec file. The real
web console includes them as the GUCs in the 'settings' field. (Both
of these are different from what the test control plane used to do:
It used to write the GUCs directly in the postgresql.conf file). The
plan is to change the control plane to use the new method, and
remove the old method, but for now, support both.
Some tests that were sensitive to the amount of WAL generated needed
small changes, to accommodate that compute_ctl runs the background
health monitor which makes a few small updates. Also some tests shut
down the pageserver, and now that the background health check can run
some queries while the pageserver is down, that can produce a few
extra errors in the logs, which needed to be allowlisted.
Other changes:
- remove obsolete comments about PostgresNode;
- create standby.signal file for Static compute node;
- log output of `compute_ctl` and `postgres` is merged into
`endpoints/compute.log`.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
We have 2 ways of tenant shutdown, we should have just one.
Changes are mostly mechanical simple refactorings.
Added `warn!` on the "shutdown all remaining tasks" should trigger test
failures in the between time of not having solved the "tenant/timeline
owns all spawned tasks" issue.
Cc: #4327.
…ompiler
## Problem
## Summary of changes
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
added the `allowed_error` to the `positive_env` so any tests completing
the attach are allowed have this print out. they are allowed to do so,
because the `random_init_delay` can produce close to zero and thus the
first run will be near attach. Though... Unsure if we ever really need
the eviction task to run **before** it can evict something, as in after
20min or 24h.
in the failed test case however period is 20s so interesting that we
didn't run into this sooner.
evidence of flaky:
https://github.com/neondatabase/neon/actions/runs/5175677035/jobs/9323705929?pr=4399#step:4:38536
walreceiver logs are a bit hard to understand because of partial span
usage, extra messages, ignored errors popping up as huge stacktraces.
Fixes#3330 (by spans, also demote info -> debug).
- arrange walreceivers spans into a hiearchy:
- `wal_connection_manager{tenant_id, timeline_id}` ->
`connection{node_id}` -> `poller`
- unifies the error reporting inside `wal_receiver`:
- All ok errors are now `walreceiver connection handling ended: {e:#}`
- All unknown errors are still stacktraceful task_mgr reported errors
with context `walreceiver connection handling failure`
- Remove `connect` special casing, was: `DB connection stream finished`
for ok errors
- Remove `done replicating` special casing, was `Replication stream
finished` for ok errors
- lowered log levels for (non-exhaustive list):
- `WAL receiver manager started, connecting to broker` (at startup)
- `WAL receiver shutdown requested, shutting down` (at shutdown)
- `Connection manager loop ended, shutting down` (at shutdown)
- `sender is dropped while join handle is still alive` (at lucky
shutdown, see #2885)
- `timeline entered terminal state {:?}, stopping wal connection manager
loop` (at shutdown)
- `connected!` (at startup)
- `Walreceiver db connection closed` (at disconnects?, was without span)
- `Connection cancelled` (at shutdown, was without span)
- `observed timeline state change, new state is {new_state:?}` (never
after Timeline::activate was made infallible)
- changed:
- `Timeline dropped state updates sender, stopping wal connection
manager loop`
- was out of date; sender is not dropped but `Broken | Stopping` state
transition
- also made `debug!`
- `Timeline dropped state updates sender before becoming active,
stopping wal connection manager loop`
- was out of date: sender is again not dropped but `Broken | Stopping`
state transition
- also made `debug!`
- log fixes:
- stop double reporting panics via JoinError
As seen on deployment of 2023-06-01 release, times were improving but
there were some outliers caused by:
- timelines `eviction_task` starting while activating and running
imitation
- timelines `initial logical size` calculation
This PR fixes it so that `eviction_task` is delayed like other
background tasks fixing an oversight from earlier #4372.
After this PR activation will be two phases:
1. load and activate tenants AND calculate some initial logical sizes
2. rest of initial logical sizes AND background tasks
- compaction, gc, disk usage based eviction, timelines `eviction_task`,
consumption metrics
## Describe your changes
Port HNSW implementation for ANN search top Postgres
## Issue ticket number and link
https://www.pinecone.io/learn/hnsw
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
We now spawn a new task for every HTTP request, and wait on the
JoinHandle. If Hyper drops the Future, the spawned task will keep
running. This protects the rest of the pageserver code from unexpected
async cancellations.
This creates a CancellationToken for each request and passes it to the
handler function. If the HTTP request is dropped by the client, the
CancellationToken is signaled. None of the handler functions make use
for the CancellationToken currently, but they now they could.
The CancellationToken arguments also work like documentation. When
you're looking at a function signature and you see that it takes a
CancellationToken as argument, it's a nice hint that the function might
run for a long time, and won't be async cancelled. The default
assumption in the pageserver is now that async functions are not
cancellation-safe anyway, unless explictly marked as such, but this is a
nice extra reminder.
Spawning a task for each request is OK from a performance point of view
because spawning is very cheap in Tokio, and none of our HTTP requests
are very performance critical anyway.
Fixes issue #3478
## Problem
Part of https://github.com/neondatabase/neon/issues/4373
## Summary of changes
This PR adds `PersistentLayerDesc`, which will be used in LayerMap
mapping and probably layer cache. After this PR and after we change
LayerMap to map to layer desc, we can safely drop RemoteLayerDesc.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Co-authored-by: bojanserafimov <bojan.serafimov7@gmail.com>
## Problem
This PR includes doc changes to the current metrics as well as adding
new metrics. With the new set of metrics, we can quantitatively analyze
the read amp., write amp. and space amp. in the system, when used
together with https://github.com/neondatabase/neonbench
close https://github.com/neondatabase/neon/issues/4312
ref https://github.com/neondatabase/neon/issues/4347
compaction metrics TBD, a novel idea is to print L0 file number and
number of layers in the system, and we can do this in the future when we
start working on compaction.
## Summary of changes
* Add `READ_NUM_FS_LAYERS` for computing read amp.
* Add `MATERIALIZED_PAGE_CACHE_HIT_UPON_REQUEST`.
* Add `GET_RECONSTRUCT_DATA_TIME`. GET_RECONSTRUCT_DATA_TIME +
RECONSTRUCT_TIME + WAIT_LSN_TIME should be approximately total time of
reads.
* Add `5.0` and `10.0` to `STORAGE_IO_TIME_BUCKETS` given some fsync
runs slow (i.e., > 1s) in some cases.
* Some `WAL_REDO` metrics are only used when Postgres is involved in the
redo process.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
compute_ctl can panic, but `tracing` is used for logging. panic stderr
output can interleave with messages from normal logging. The fix is to
use the established way (pageserver, safekeeper, storage_broker) of using
`tracing` to report panics.
This parameter can be use to restrict number of image layers generated
because of GC request (wanted image layers).
Been set to zero it completely eliminates creation of such image layers.
So it allows to avoid extra storage consumption after merging #3673
## Problem
PR #3673 forces generation of missed image layers. So i short term is
cause cause increase (in worst case up to two times) size of storage.
It was intended (by me) that GC period is comparable with PiTR interval.
But looks like it is not the case now - GC is performed much more
frequently. It may cause the problem with space exhaustion: GC forces
new image creation while large PiTR still prevent GC from collecting old
layers.
## Summary of changes
Add new pageserver parameter` forced_image_creation_limit` which
restrict number of created image layers which are requested by GC.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Startup continues to be slow, work towards to alleviate it.
Summary of changes:
- pretty the functional improvements from #4366 into
`utils::completion::{Completion, Barrier}`
- extend "initial load completion" usage up to tenant background tasks
- previously only global background tasks
- spawn_blocking the tenant load directory traversal
- demote some logging
- remove some unwraps
- propagate some spans to `spawn_blocking`
Runtime effects should be major speedup to loading, but after that, the
`BACKGROUND_RUNTIME` will be blocked for a long time (minutes). Possible
follow-ups:
- complete initial tenant sizes before allowing background tasks to
block the `BACKGROUND_RUNTIME`
I've added logs for broker push duration after every iteration in https://github.com/neondatabase/neon/pull/4142. This log has not found any real issues, so we can replace it with metrics, to slightly reduce log volume.
LogQL query found that pushes longer that 500ms happened only 90 times for the last month. https://neonprod.grafana.net/goto/KTNj9UwVg?orgId=1
`{unit="safekeeper.service"} |= "timeline updates to broker in" | regexp "to broker in (?P<duration>.*)" | duration > 500ms`
## Problem
In the future, we want to compare code coverage on a PR with coverage on
the main branch.
Currently, we store only code coverage HTML reports, I suggest we start
storing reports in "lcov info" format that we can use/parse in the
future. Currently, the file size is ~7Mb (it's a text-based format and
could be compressed into a ~400Kb archive)
- More about "lcov info" format:
https://manpages.ubuntu.com/manpages/jammy/man1/geninfo.1.html#files
- Part of https://github.com/neondatabase/neon/issues/3543
## Summary of changes
- Change `scripts/coverage` to output lcov coverage to
`report/lcov.info` file instead of stdout (we already upload the whole
`report/` directory to S3)
Startup can take a long time. We suspect it's the initial logical size
calculations. Long term solution is to not block the tokio executors but
do most of I/O in spawn_blocking.
See: #4025, #4183
Short-term solution to above:
- Delay global background tasks until initial tenant loads complete
- Just limit how many init logical size calculations can we have at the
same time to `cores / 2`
This PR is for trying in staging.
This is preliminary work for/from #4220 (async
`Layer::get_value_reconstruct_data`).
The motivation is to avoid locking `Tenant::timelines` in places that
can't be `async`, because in #4333 we want to convert Tenant::timelines
from `std::sync::Mutex` to `tokio::sync::Mutex`.
But, the changes here are useful in general because they clean up &
document tenant state transitions.
That also paves the way for #4350, which is an alternative to #4333 that
refactors the pageserver code so that we can keep the
`Tenant::timelines` mutex sync.
This patch consists of the following core insights and changes:
* spawn_load and spawn_attach own the tenant state until they're done
* once load()/attach() calls are done ...
* if they failed, transition them to Broken directly (we know that
there's no background activity because we didn't call activate yet)
* if they succeed, call activate. We can make it infallible. How? Later.
* set_broken() and set_stopping() are changed to wait for spawn_load() /
spawn_attach() to finish.
* This sounds scary because it might hinder detach or shutdown, but
actually, concurrent attach+detach, or attach+shutdown, or
load+shutdown, or attach+shutdown were just racy before this PR.
So, with this change, they're not anymore.
In the future, we can add a `CancellationToken` stored in Tenant to
cancel `load` and `attach` faster, i.e., make `spawn_load` /
`spawn_attach` transition them to Broken state sooner.
See the doc comments on TenantState for the state transitions that are
now possible.
It might seem scary, but actually, this patch reduces the possible state
transitions.
We introduce a new state `TenantState::Activating` to avoid grabbing the
`Tenant::timelines` lock inside the `send_modify` closure.
These were the humble beginnings of this PR (see Motivation section),
and I think it's still the right thing to have this `Activating` state,
even if we decide against async `Tenant::timelines` mutex. The reason is
that `send_modify` locks internally, and by moving locking of
Tenant::timelines out of the closure, the internal locking of
`send_modify` becomes a leaf of the lock graph, and so, we eliminate
deadlock risk.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
#4155 inadvertently switched to a version of the VM builder that leaves
the file cache integration disabled by default. This re-enables the
vm-informant's file cache integration.
(as a refresher: The vm-informant is the autoscaling component that sits
inside the VM and manages postgres / compute_ctl)
See also: https://github.com/neondatabase/autoscaling/pull/265
If the timeline is already being deleted, return an error. We used to
notice the duplicate request and error out in
persist_index_part_with_deleted_flag(), but it's better to detect it
earlier. Add an explicit lock for the deletion.
Note: This doesn't do anything about the async cancellation problem
(github issue #3478): if the original HTTP request dropped, because the
client disconnected, the timeline deletion stops half-way through the
operation. That needs to be fixed, too, but that's a separate story.
(This is a simpler replacement for PR #4194. I'm also working on the
cancellation shielding, see PR #4314.)
Previously, you used it like this:
|r| RequestSpan(my_handler).handle(r)
But I don't see the point of the RequestSpan struct. It's just a
wrapper around the handler function. With this commit, the call
becomes:
|r| request_span(r, my_handler)
Which seems a little simpler.
At first I thought that the RequestSpan struct would allow "chaining"
other kinds of decorators like RequestSpan, so that you could do
something like this:
|r| CheckPermissions(RequestSpan(my_handler)).handle(r)
But it doesn't work like that. If each of those structs wrap a handler
*function*, it would actually look like this:
|r| CheckPermissions(|r| RequestSpan(my_handler).handle(r))).handle(r)
This commit doesn't make that kind of chaining any easier, but seems a
little more straightforward anyway.
Require the error type to be ApiError. It implicitly required that
anyway, because the function used error::handler, which downcasted the
error to an ApiError. If the error was in fact anything else than
ApiError, it would just panic. Better to check it at compilation time.
Also make the last-resort error handler more forgiving, so that it
returns an 500 Internal Server error response, instead of panicking,
if a request handler returns some other error than an ApiError.
Compaction is usually a compute-heavy process and might affect other
futures running on the thread of the compaction. Therefore, we add
`block_in_place` as a temporary solution to avoid blocking other futures
on the same thread as compaction in the runtime. As we are migrating
towards a fully-async-style pageserver, we can revert this change when
everything is async and when we move compaction to a separate runtime.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
## Problem
GitHub Autocomment script posts a comment only for PRs. It's harder
to debug failed tests on main or release branches.
## Summary of changes
- Change the GitHub Autocomment script to be able to post a comment to
either a PR or a commit of a branch
We used to generate the ID, if the caller didn't specify it. That's bad
practice, however, because network is never fully reliable, so it's
possible we create a new tenant but the caller doesn't know about it,
and because it doesn't know the tenant ID, it has no way of retrying or
checking if it succeeded. To discourage that, make it mandatory. The web
control plane has not relied on the auto-generation for a long time.
We currently have a semaphore based rate limiter which we hope will keep
us under S3 limits. However, the semaphore does not consider time, so
I've been hesitant to raise the concurrency limit of 100.
See #3698.
The PR Introduces a leaky-bucket based rate limiter instead of the
`tokio::sync::Semaphore` which will allow us to raise the limit later
on. The configuration changes are not contained here.
## Problem
Test `test_metric_collection` become flaky:
```
AssertionError: assert not ['2023-05-25T14:03:41.644042Z ERROR metrics_collection: failed to send metrics: reqwest::Error { kind: Request, url: Url { scheme: "http", cannot_be_a_base: false, username: "", password: None, host: Some(Domain("localhost")), port: Some(18022), path: "/billing/api/v1/usage_events", query: None, fragment: None }, source: hyper::Error(Connect, ConnectError("tcp connect error", Os { code: 99, kind: AddrNotAvailable, message: "Cannot assign requested address" })) }',
...]
```
I suspect it is caused by having 2 places when we define
`httpserver_listen_address` fixture (which is internally used by
`pytest-httpserver` plugin)
## Summary of changes
- Remove the definition of `httpserver_listen_address` from
`test_runner/regress/test_ddl_forwarding.py` and keep one in
`test_runner/fixtures/neon_fixtures.py`
- Also remote unused `httpserver_listen_address` parameter from
`test_proxy_metric_collection`
Timeline::activate() was only fallible because `launch_wal_receiver`
was.
`launch_wal_receiver` was fallible only because of some preliminary
checks in `WalReceiver::start`.
Turns out these checks can be shifted to the type system by delaying
creatinon of the `WalReceiver` struct to the point where we activate the
timeline.
The changes in this PR were enabled by my previous refactoring that
funneled the broker_client from pageserver startup to the activate()
call sites.
Patch series:
- #4316
- #4317
- #4318
- #4319
Routine `vm-builder` version bump, from autoscaling repo release. You
can find the release notes here:
https://github.com/neondatabase/autoscaling/releases/tag/v0.8.0
The changes are from v0.7.2 — most of them were already included in
v0.7.3-alpha3.
Of particular note: This (finally) fixes the cgroup issues, so we should
now be able to scale up when we're about to run out of memory.
**NB:** This has the effect of limit the DB's memory usage in a way it
wasn't limited before. We may run into issues because of that. There is
currently no way to disable that behavior, other than switching the
endpoint back to the k8s-pod provisioner.
(This is prep work to make `Timeline::activate` infallible.)
This patch removes the global storage_broker client instance from the
pageserver codebase.
Instead, pageserver startup instantiates it and passes it down to the
`Timeline::activate` function, which in turn passes it to the
WalReceiver, which is the entity that actually uses it.
Patch series:
- #4316
- #4317
- #4318
- #4319
Before this patch, it would use error type `TenantStateError` which has
many more error variants than can actually happen with
`mgr::get_tenant`.
Along the way, I also introduced `SetNewTenantConfigError` because it
uses `mgr::get_tenant` and also can only fail in much fewer ways than
`TenantStateError` suggests.
The new `page_service.rs`'s `GetActiveTimelineError` and
`GetActiveTenantError` types were necessary to avoid an `Other` variant
on the `GetTenantError`.
This patch is a by-product of reading code that subscribes to
`Tenant::state` changes.
Can't really connect it to any given project.
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
(Instead of going through mgr every iteration.)
The `wait_for_active_tenant` function's `wait` argument could be removed
because it was only used for the loop that waits for the tenant to show
up in the tenants map. Since we're passing the tenant in, we now longer
need to get it from the tenants map.
NB that there's no guarantee that the tenant object is in the tenants
map at the time the background loop function starts running. But the
tenant mgr guarantees that it will be quite soon. See
`tenant_map_insert` way upwards in the call hierarchy for details.
This is prep work to eliminate `subscribe_for_state_updates` (PR #4299 )
Fixes: #3501
This PR refactors the original page_binutils with a single tool pagectl,
use clap derive for better command line parsing, and adds the dump kv
tool to extract information from delta file. This helps me better
understand what's inside the page server. We can add support for other
types of file and more functionalities in the future.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
(This is prep work to make `Timeline::activate()` infallible.)
The current possibility for failure in `Timeline::activate()` is the
broker client's presence / absence. It should be an assert, but we're
careful with these. So, I'm planning to pass in the broker client to
activate(), thereby eliminating the possiblity of its absence.
In the unit tests, we don't have a broker client. So, I thought I'd be
in trouble because the unit tests also called `activate()` before this
PR.
However, closer inspection reveals a long-standing FIXME about this,
which is addressed by this patch.
It turns out that the unit tests don't actually need the background
loops to be running. They just need the state value to be `Active`. So,
for the tests, we just set it to that value but don't spawn the
background loops.
We'll need to revisit this if we ever do more Rust unit tests in the
future. But right now, this refactoring improves the code, so, let's
revisit when we get there.
Patch series:
- #4316
- #4317
- #4318
- #4319
## Problem
`pytest` 6 truncates error messages and this is not configured.
It's fixed in `pytest` 7, it prints the whole message (truncating limit
is higher) if `--verbose` is set (it's set on CI).
## Summary of changes
- `pytest` and `pytest` plugins are updated to their latest versions
- linters (`black` and `ruff`) are updated to their latest versions
- `mypy` and types are updated to their latest versions, new warnings
are fixed
- while we're here, allure updated its latest version as well
Checking out proxy logs for the endpoint is a frequent (often first) operation
during user issues investigation; let's remove endpoint id -> session id mapping
annoying extra step here.
## Describe your changes
Right now the only criteria for image layer generation is number of
delta layer since last image layer.
If we have "stairs" layout of delta layers (see link below) then it can
happen that there a lot of old delta layers which can not be reclaimed
by GC because are not fully covered with image layers.
This PR constructs list of "wanted" image layers in GC (which image
layers are needed to be able to remove old layers)
and pass this list to compaction task which performs generation of image
layers.
So right now except deltas count criteria we also take in account
"wishes" of GC.
## Issue ticket number and link
See
https://neondb.slack.com/archives/C033RQ5SPDH/p1676914249982519
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
In the v0.6.0 release, vm-builder was changed to be Neon-specific, so
it's handling all the stuff that Dockerfile.vm-compute-node used to do.
This commit bumps vm-builder to v0.7.3-alpha3.
This commit introduces an SQL-over-HTTP endpoint in the proxy, with a JSON
response structure resembling that of the node-postgres driver. This method,
using HTTP POST, achieves smaller amortized latencies in edge setups due to
fewer round trips and an enhanced open connection reuse by the v8 engine.
This update involves several intricacies:
1. SQL injection protection: We employed the extended query protocol, modifying
the rust-postgres driver to send queries in one roundtrip using a text
protocol rather than binary, bypassing potential issues like those identified
in https://github.com/sfackler/rust-postgres/issues/1030.
2. Postgres type compatibility: As not all postgres types have binary
representations (e.g., acl's in pg_class), we adjusted rust-postgres to
respond with text protocol, simplifying serialization and fixing queries with
text-only types in response.
3. Data type conversion: Considering JSON supports fewer data types than
Postgres, we perform conversions where possible, passing all other types as
strings. Key conversions include:
- postgres int2, int4, float4, float8 -> json number (NaN and Inf remain
text)
- postgres bool, null, text -> json bool, null, string
- postgres array -> json array
- postgres json and jsonb -> json object
4. Alignment with node-postgres: To facilitate integration with js libraries,
we've matched the response structure of node-postgres, returning command tags
and column oids. Command tag capturing was added to the rust-postgres
functionality as part of this change.
This patch fixes parsing of the `max_lsn_wal_lag` tenant config item.
We were incorrectly expecting a string before, but the type is a
NonZeroU64.
So, when setting it in the config, the (updated) test case would fail
with
```
E psycopg2.errors.InternalError_: Tenant a1fa9cc383e32ddafb73ff920de5f2e6 will not become active. Current state: Broken due to: Failed to parse config from file '.../repo/tenants/a1fa9cc383e32ddafb73ff920de5f2e6/config' as pageserver config: configure option max_lsn_wal_lag is not a string. Backtrace:
```
So, not even the assertions added are necessary.
The test coverage for tenant config is rather thin in general.
For example, the `test_tenant_conf.py` test doesn't cover all the
options.
I'll add a new regression test as part of attach-time-tenant-conf PR
https://github.com/neondatabase/neon/pull/4255
## Problem
`osgeo.org` is experiencing some problems with DNS resolving which
breaks `compute-node-image` (because it can't download postgis)
## Summary of changes
- Add `140.211.15.30 download.osgeo.org` to /etc/hosts by passing it via
the container option
This PR enforces that the tenant create / update-config APIs reject
requests with unknown fields.
This is a desirable property because some tenant config settings control
the lifetime of user data (e.g., GC horizon or PITR interval).
Suppose we inadvertently rename the `pitr_interval` field in the Rust
code.
Then, right now, a client that still uses the old name will send a
tenant config request to configure a new PITR interval.
Before this PR, we would accept such a request, ignore the old name
field, and use the pageserver.toml default value for what the new PITR
interval is.
With this PR, we will instead reject such a request.
One might argue that the client could simply check whether the config it
sent has been applied, using the `/v1/tenant/.../config` endpoint.
That is correct for tenant create and update-config.
But, attach will soon [^1] grow the ability to have attach-time config
as well.
If we ignore unknown fields and fall back to global defaults in that
case, we risk data loss.
Example:
1. Default PITR in pageservers is 7 days.
2. Create a tenant and set its PITR to 30 days.
3. For 30 days, fill the tenant continuously with data.
4. Detach the tenant.
5. Attach tenant.
Attach must use the 30-day PITR setting in this scenario.
If it were to fall back to the 7-day default value, we would lose 23
days of PITR capability for the tenant.
So, the PR that adds attach-time tenant config will build on the
(clunky) infrastructure added in this PR
[^1]: https://github.com/neondatabase/neon/pull/4255
Implementation Notes
====================
This could have been a simple `#[serde(deny_unknown_fields)]` but sadly,
that is documented- but silent-at-compile-time-incompatible with
`#[serde(flatten)]`. But we are still using this by adding on outer struct and use unit tests to ensure it is correct.
`neon_local tenant config` now uses the `.remove()` pattern + bail if
there are leftover config args. That's in line with what
`neon_local tenant create` does. We should dedupe that logic in a future
PR.
---------
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Co-authored-by: Alex Chi <iskyzh@gmail.com>
Previously we didn't handle XACT_XINFO_HAS_INVALS and XACT_XINFO_HAS_DROPPED_STAT correctly,
which led to getting incorrect value of twophase_xid for records with XACT_XINFO_HAS_TWOPHASE.
This caused 'twophase file for xid {} does not exist' errors in test_isolation
We had a hot debate on whether we should try to make our code
cancellation-safe, or just accept that it's not, and make sure that
our Futures are driven to completion. The decision is that we drive
Futures to completion. This documents the decision, and summarizes the
reasoning for that.
Discussion that sparked this:
https://github.com/neondatabase/neon/pull/4198#discussion_r1190209316
Disable background tasks to not get compaction downloading all layers
but also stop safekeepers before checkpointing, use a readonly endpoint.
Fixes: #3666
Co-authored-by: Christian Schwarz <christian@neon.tech>
- Group tests by Postgres version
- Merge different build types
- Add a command to GitHub comment on how to rerun all failed tests
(different command for different Postgres versions)
- Restore a link to a test report in the build summary
This is prep for https://github.com/neondatabase/neon/pull/4255
[1/X] OpenAPI: share a single definition of TenantConfig
DRYs up the pageserver OpenAPI YAML's representation of
tenant config.
All the fields of tenant config are now located in a model schema
called TenantConfig.
The tenant create & config-change endpoints have separate schemas,
TenantCreateInfo and TenantConfigureArg, respectively.
These schemas inherit from TenantConfig, using allOf 1.
The tenant config-GET handler's response was previously named
TenantConfig.
It's now named TenantConfigResponse.
None of these changes affect how the request looks on the wire.
The generated Go code will change for Console because the OpenAPI code
generator maps `allOf` to a Go struct embedding.
Luckily, usage of tenant config in Console is still very lightweigt,
but that will change in the near future.
So, this is a good chance to set things straight.
The console changes are tracked in
https://github.com/neondatabase/cloud/pull/5046
[2/x]: extract the tenant config parts of create & config requests
[3/x]: code movement: move TenantConfigRequestConfig next to
TenantCreateRequestConfig
[4/x] type-alias TenantConfigRequestConfig = TenantCreateRequestConfig;
They are exactly the same.
[5/x] switch to qualified use for tenant create/config request api
models
[6/x] rename models::TenantConfig{RequestConfig,} and remove the alias
[7/x] OpenAPI: sync tenant create & configure body names from Rust code
[8/x]: dedupe the two TryFrom<...> for TenantConfOpt impls
The only difference is that the TenantConfigRequest impl does
```
tenant_conf.max_lsn_wal_lag = request_data.max_lsn_wal_lag;
tenant_conf.trace_read_requests = request_data.trace_read_requests;
```
and the TenantCreateRequest impl does
```
if let Some(max_lsn_wal_lag) = request_data.max_lsn_wal_lag {
tenant_conf.max_lsn_wal_lag = Some(max_lsn_wal_lag);
}
if let Some(trace_read_requests) = request_data.trace_read_requests {
tenant_conf.trace_read_requests = Some(trace_read_requests);
}
```
As far as I can tell, these are identical.
## Problem
`neondatabase/zenith-coverage-data` is too big:
- It takes ~6 minutes to clone and push the repo
- GitHub fails to publish an HTML report to github.io
Part of https://github.com/neondatabase/neon/issues/3543
## Summary of changes
Replace pushing code coverage report to
`neondatabase/zenith-coverage-data` with uploading it to S3
With this patch, the attach handler now follows the same pattern as
tenant create with regards to instantiation of the new tenant:
1. Prepare on-disk state using `create_tenant_files`.
2. Use the same code path as pageserver startup to load it into memory
and start background loops (`schedule_local_tenant_processing`).
It's a bit sad we can't use the
`PageServerConfig::tenant_attaching_mark_file_path` method inside
`create_tenant_files` because it operates in a temporary directory.
However, it's a small price to pay for the gained simplicity.
During implementation, I noticed that we don't handle failures post
`create_tenant_files` well. I left TODO comments in the code linking to
the issue that I created for this [^1].
Also, I'll dedupe the spawn_load and spawn_attach code in a future
commit.
refs https://github.com/neondatabase/neon/issues/1555
part of https://github.com/neondatabase/neon/issues/886 (Tenant
Relocation)
[^1]: https://github.com/neondatabase/neon/issues/4233
## Problem
Compatibility tests don't support Postgres 15 yet, but we're still
trying to upload compatibility snapshot (which we do not collect).
Ref
https://github.com/neondatabase/neon/actions/runs/4991394158/jobs/8940369368#step:4:38129
## Summary of changes
Add `pg_version` parameter to `run-python-test-set` actions and do not
upload compatibility snapshot for Postgres 15
This commit replaces all usages of connection_manager.rs:
wait_for_active_timeline with Timeline::wait_to_become_active.
wait_to_become_active is better and in the right module.
close https://github.com/neondatabase/neon/issues/4189
Co-authored-by: Shany Pozin <shany@neon.tech>
Use an enum instead of an array. Before that there was no connection
between definition of the metric and point where it was used aside from
matching string literals. Now its possible to use IDE features to check
for references. Also this allows to avoid mismatch between set of
metrics that was defined and set of metrics that was actually used
What is interesting is that `init logical size` case is not used. I
think `LogicalSize` is a duplicate of `InitLogicalSize`. So removed the latter.
Conflicts:
- Changes in PG15's xlogrecovery.c resulted in non-substantial conflicts between
ecb01e6ebb5a67f3fc00840695682a8b1ba40461 and
aee72b7be903e52d9bdc6449aa4c17fb852d8708
Fixes#4207
This PR is simply the patch from
https://github.com/neondatabase/neon/issues/4008 except we enabled
`force_path_style` for custom endpoints. This is because at some
version, the s3 sdk by default uses the virtual-host style access, which
is not supported by MinIO in the default configuration. By enforcing
path style access for custom endpoints, we can pass all e2e test cases.
SDK 0.55 is not the latest version and we can bump it further later when
all flaky tests in this PR are resolved.
This PR also (hopefully) fixes flaky test
`test_ondemand_download_timetravel`.
close https://github.com/neondatabase/neon/issues/4008
Signed-off-by: Alex Chi <iskyzh@gmail.com>
Should fix flakiness caused by the error
```
FATAL: could not resize shared memory segment "/PostgreSQL.3944613150" to 1048576 bytes: No space left on device
```
## Describe your changes
`pageserver_disconnect()` calls `PQfinish()` which deallocates resources
on the connection structure. `PQerrorMessage()` hands back a pointer to
an allocated resource. Duplicate the error message prior to calling
`pageserver_disconnect()`.
## Issue ticket number and link
Fixes https://github.com/neondatabase/neon/issues/4214
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [x] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [x] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [x] Do not forget to reformat commit message to not include the above
checklist
Await for upload to complete before returning 201 Created on
`branch_timeline` or when `bootstrap_timeline` happens. Should either of
those waits fail, then on the retried request await for uploads again.
This should work as expected assuming control-plane does not start to
use timeline creation as a wait_for_upload mechanism.
Fixes#3865, started from
https://github.com/neondatabase/neon/pull/3857/files#r1144468177
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
After tenant attach, there is a window where the child timeline is
loaded and accepts GetPage requests, but its parent is not. If a
GetPage request needs to traverse to the parent, it needs to wait for
the parent timeline to become active, or it might miss some records on
the parent timeline.
It's also possible that the parent timeline is active, but it hasn't
yet received all the WAL up to the branch point from the safekeeper.
This happens if a pageserver crashes soon after creating a timeline,
so that the WAL leading to the branch point has not yet been uploaded
to remote storage. After restart, the WAL will be re-streamed and
ingested from the safekeeper, but that takes a while. Because of that,
it's not enough to check that the parent timeline is active, we also
need to wait for the WAL to arrive on the parent timeline, just like
at the beginning of GetPage handling. We probably should change the
behavior at create_timeline so that a timeline can only be created
after all the WAL up to the branch point has been uploaded to remote
storage, but that's not currently the case and out of scope for this
PR (see github issue #4218).
@NanoBjorn encountered this while working on tenant migration. After
migrating a tenant with a parent and child branch, connecting to the
child branch failed with an error like:
```
FATAL: "base/16385" is not a valid data directory
DETAIL: File "base/16385/PG_VERSION" is missing.
```
This commit adds two tests that reproduce the bug, with slightly
different symptoms.
Before this PR, the gather_inputs() calls made to imitate synthetic size
calculation accesses were accounted towards the real logical size
calculation metric.
This PR forces all callers to declare the cause for making logical size
calculations, making the decision which cause counts towards which
metric explicit.
This is follow-up to
```
commit 1d266a6365
Author: Christian Schwarz <christian@neon.tech>
Date: Thu May 11 16:09:29 2023 +0200
logical size calculation metrics: differentiate regular vs imitated (#4197)
```
After merging this patch, I hope to be able to explain why we have ca
30x more "logical size" ops in prod than "imitate logical size" for any
given observation interval.
refs https://github.com/neondatabase/neon/issues/4154
We already have the warn!() log line for this condition. This PR adds a
corresponding metric on which we can have a dedicated alert. Cheaper and
more reliable than alerting on the logs, because, we run into log rate
limits from time to time these days.
refs https://github.com/neondatabase/neon/issues/4222
This PR adds tests runs on Postgres 15 and created unified Allure report
with results for all tests.
- Split `.github/actions/allure-report` into
`.github/actions/allure-report-store` and
`.github/actions/allure-report-generate`
- Add debug or release pytest parameter for all tests (depending on
`BUILD_TYPE` env variable)
- Add Postgres version as a pytest parameter for all tests (depending on
`DEFAULT_PG_VERSION` env variable)
- Fix `test_wal_restore` and `restore_from_wal.sh` to support path with
`[`/`]` in it (fixed by applying spellcheck to the script and fixing all
warnings), `restore_from_wal_archive.sh` is deleted as unused.
- All known failures on Postgres 15 marked with xfail
While investigating https://github.com/neondatabase/neon/issues/4154 I
found that the `Calculating logical size for timeline` tracing events
created from within the logical size computation code are not always
attributable to the background task that caused it.
My goal is to be able to distinguish in the logs whether a `Calculating
logical size for timeline` was logged as part of a real synthetic size
calculation VS an imitation by the eviction task.
I want this distinction so I can prove my assumption that the disk IO
peaks which we see every 24h on prod are due to eviction's imitate
synthetic size calculations.
The alternative here, which I would have preferred, but is more work:
link RequestContext's into a child->parent list and dump this list when
we log `Calculating logical size for timeline`.
I would have preferred that over what we have in this PR because,
technically, the ondemand logical size computation can outlive the
caller that spawned it. This is against the idea of correctly nested
spans.
I guess in OpenTelemetry land, the correct modelling would be a link
between the caller's span and the task_mgr task's span.
Anyways, I think the case where we hang up on the spawned ondemand
logical size calculation is quite rare. So, I'm willing to tolerate
incorrectly nested spans for these edge-cases.
refs https://github.com/neondatabase/neon/issues/4154
I would like to know whether and by how much the eviction iterations
spike in the $period-sized window that happens every $threshold , when
all the timelines do the imitate accesses.
refs https://github.com/neondatabase/neon/issues/4154
I tried to use failpoint_sleep_millis_async(...) in a source file that
didn't do `use std::time::Duration`, and got a compiler error:
```
error[E0433]: failed to resolve: use of undeclared type `Duration`
--> pageserver/src/walingest.rs:316:17
|
316 | utils::failpoint_sleep_millis_async!("wal-ingest-logical-message-sleep");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ not found in this scope
|
= note: this error originates in the macro `utils::failpoint_sleep_millis_async` (in Nightly builds, run with -Z macro-backtrace for more info)
help: consider importing one of these items
|
24 | use chrono::Duration;
|
24 | use core::time::Duration;
|
24 | use humantime::Duration;
|
24 | use serde_with::__private__::Duration;
|
and 2 other candidates
```
I want this distinction so I can prove my assumption that the disk IO
peaks which we see every 24h on prod are due to eviction's imitate
synthetic size calculations.
refs https://github.com/neondatabase/neon/issues/4154
Control Plane currently [^1] polls for `has_in_progress_downloads ==
false` after /attach to determine that an attach operation succeeded.
As pointed out in the OpenAPI spec as of neon#4151, polling for
`has_in_progress_downloads` is incorrect.
This patch changes the situation by
- removing `has_in_progress_downloads`
- adding a new field `attachment_status.`
- changing instructions for `/attach` to poll for `attachment_status ==
attached`.
This makes the instructions in `/attach` actionable for Control Plane.
NB that we don't expose the TenantState in the OpenAPI docs, even though
we expose it in the endpoint. That is with good reason because we don't
want to commit to a fixed set of tenant states forever. Hence, the
separate `attachment_status` field that exposes the bare minimum
required to make /attach + subsequent polling 100% safe wrt split brain.
It would have been nice to report failures explicitly, but the problem
is that we lose that state when we restart. So, we return `attached`
upon attach failure. The tenant is Broken in that case, causing Control
Plane's subsequent health check will fail. Control Plane can roll back
the relocation operation then.
NB: the reliance on the subsequent health check is no change to what we
had before this patch!
NB: we can always add additional TenantAttachmentStatus'es in the future
to communicate failure.
This PR also moves the attach-marker file's creation to the API
handler's synchronous part. That was done to avoid the need to
distinguish
* `Attaching but marker not yet written => AttachmentStatus::Maybe` from
* `Attaching, marker written, but attach failed for other reason =>
AttachmentStatus::Attached`
Coincidentally, this also adds more transactionality to the /attach API
because we only return 202 once we've written the marker file. But, in
the end, it doesn't affect how the control plane interacts with us or
how it needs to do retries. So, we don't mention any of this in the API
docs.
[^1]: The one-click tenant relocation PR cloud#4740, currently WIP, is
the first real user.
Before this patch, the following sequence would lead to the resurrection of a deleted timeline:
- create timeline
- wait for its index part to reach s3
- delete timeline
- wait an arbitrary amount of time, including 0 seconds
- detach tenant
- attach tenant
- the timeline is there and Active again
This happens because we only kept track of the deletion in the tenant dir (by deleting the timeline dir) but not in S3.
The solution is to turn the deleted timeline's IndexPart into a tombstone.
The deletion status of the timeline is expressed in the `deleted_at: Option<NativeDateTime>` field of IndexPart.
It's `None` while the timeline is alive and `Some(deletion time stamp)` if it is deleted.
We change the timeline deletion handler to upload this tombstoned IndexPart.
The handler does not return success if the upload fails.
Coincidentally, this fixes the long-stanging TODO about the `std::fs::remove_dir_all` being not atomic.
It need not be atomic anymore because we set the `deleted_at=Some()` before starting the `remove_dir_all`.
The tombstone is in the IndexPart only, not in the `metadata`.
So, we only have the tombstone and the `remove_dir_all` benefits mentioned above if remote storage is configured.
This was a conscious trade-off because there's no good format evolution story for the current metadata file format.
The introduction of this additional step into `delete_timeline` was painful because delete_timeline needs to be
1. cancel-safe
2. idempotent
3. safe to call concurrently
These are mostly self-inflicted limitations that can be avoided by using request-coalescing.
PR https://github.com/neondatabase/neon/pull/4159 will do that.
fixes https://github.com/neondatabase/neon/issues/3560
refs https://github.com/neondatabase/neon/issues/3889 (part of tenant relocation)
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Christian Schwarz <christian@neon.tech>
Currently, if we unexpectly download from the eviction task, the log
lines look like what we have in
https://github.com/neondatabase/neon/issues/4154
```
2023-05-04T14:42:57.586772Z WARN eviction_task{tenant_id=$TENANT timeline_id=$TIMELINE}:eviction_iteration{policy_kind="LayerAccessThreshold"}: unexpectedly on-demand downloading remote layer remote $TIMELINE/000000067F000032AC0000400C00FFFFFFFF-000000067F000032AC000040140000000008__0000000001696070-0000000003DC76E9 for task kind Eviction
```
We know these are caused by the imitate accesses.
But we don't know which one (my bet is on update_gc_info).
I didn't want to pollute the other tasks' logs with the additional
spans, so, using `.instrument()` when we call non-eviction-task code.
refs https://github.com/neondatabase/neon/issues/4154
If compute_ctl is launched without a spec file, it fetches it from the
control plane with an HTTP request. We cannot get the startup tracing
context from the compute spec in that case, because we don't have it
available on start. We could still read the tracing context from the
compute spec after we have fetched it, but that would leave the fetch
itself out of the context. Pass the tracing context in environment
variables instead.
Add `wal_backup_parallel_jobs` cmdline argument to specify the max count
of parallel segments upload. New default value is 5, meaning that
safekeepers will try to upload 5 segments concurrently if they are
available. Setting this value to 1 will be equivalent to the sequential
upload that we had before.
Part of the https://github.com/neondatabase/neon/issues/3957
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
## Describe your changes
Compiles kq_imcx extension
At this moment, there are some issues with the extension:
1. I'm cloning it directly from the master branch. It's better to fetch
tag/archive
2. PG14:
```
postgres=# CREATE EXTENSION IF NOT EXISTS kq_imcx;
postgres=# select * from kq_calendar_cache_info();
2023-02-08 13:55:22.853 UTC [412] ERROR: relation "ketteq.slice_type" does not exist at character 34
2023-02-08 13:55:22.853 UTC [412] QUERY: select min(s.id), max(s.id) from ketteq.slice_type s
2023-02-08 13:55:22.853 UTC [412] STATEMENT: select * from kq_calendar_cache_info();
ERROR: relation "ketteq.slice_type" does not exist
LINE 1: select min(s.id), max(s.id) from ketteq.slice_type s
```
3. PG15:
`cannot request additional shared memory outside shmem_request_hook`
Note: I don't think we need to publish info about this extension in the
docs.
## Issue ticket number and link
neondatabase/cloud#3387
We currently return 202 as soon as the tenant is allocated in memory
before we've written out the marker file. So, the /attach API currently
does not have a transactional character. For example, it can happen that
we respond with a 202 and then crash before writing out the marker file.
In such a case, it is important that the client
1. observes the lost attach (by polling tenant status and observing 404)
2. and consequently retries the attach.
It has to do it in this loop until it observes the tenant as "Active" in
the tenant status. If the client doesn't follow this protocol and
instead goes to another pageserver to attach the tenant, we risk a
split-brain situation where both the first and second pageserver write
to the tenant's S3 state.
The improved description highlights the consequences of this behavior
for clients that use the /attach endpoint.
The tenant relocation that is currently being implemented in cloud#4740
implements retries of Attach and it does poll afterwards, but, it polls
`has_in_progress_downloads`.
That is incorrect, as described in the patch body.
The motivation for this write-up is that, in a future PR, we'll extend
the /attach endpoint with an option to provide the tenant config. If we
decide to leave the non-transactional behavior of /attach unmodified, we
will be able to avoid persisting the tenant config. Conversely, if we
decide that the /attach API should become transactional, we'll need to
persist the tenant config in the attach-marker-file before acknowledging
receipt of the /attach operation.
refs https://github.com/neondatabase/cloud/pull/4740
refs https://github.com/neondatabase/neon/issues/2238
refs https://github.com/neondatabase/neon/issues/1555
Our scale-to-zero logic was optimized for short auto-suspend intervals,
e.g. minutes or hours. In this case, if compute was restarted by k8s due
to some reason (OOM, k8s node went down, pod relocation, etc.),
`last_active` got bumped, we start counting auto-suspend timeout again.
It's not a big deal, i.e. we suspend completely idle compute not after 5
minutes, but after 10 minutes or so.
Yet, some clients may want days or even weeks. And chance that compute
could be restarted during this interval is pretty high, but in this case
we could be not able to suspend some computes for weeks.
After this commit, we won't initialize `last_active` on start, so
`/status` could return an unset attribute. This means that there was no
user activity since start. Control-plane should deal with it by taking
`max()` out of all available activity timestamps: `started_at`,
`last_active`, etc.
compute_ctl part of neondatabase/cloud#4853
This patch adds a regression test for the threshold-based layer
eviction.
The test asserts the basic invariant that, if left alone, the residence
statuses will stabilize, with some layers resident and some layers
evicted.
Thereby, we cover both the aspect of last-access-time-threshold-based
eviction, and the "imitate access" hacks that we put in recently.
The aggressive `period` and `threshold` values revealed a subtle bug
which is also fixed in this patch.
The symptom was that, without the Rust changes of this patch, there
would be occasional test failures due to `WARN... unexpectedly
downloading` log messages.
These log messages were caused by the "imitate access" calls of the
eviction task.
But, the whole point of the "imitate access" hack was to prevent
eviction of the layers that we access there.
After some digging, I found the root cause, which is the following race
condition:
1. Compact: Write out an L1 layer from several L0 layers. This records
residence event `LayerCreate` with the current timestamp.
2. Eviction: imitate access logical size calculation. This accesses the
L0 layers because the L1 layer is not yet in the layer map.
3. Compact: Grab layer map lock, add the new L1 to layer map and remove
the L0s, release layer map lock.
4. Eviction: observes the new L1 layer whose only activity timestamp is
the `LayerCreate` event.
The L1 layer had no chance of being accessed until after (3).
So, if enough time passes between (1) and (3), then (4) will observe a
layer with `now-last_activity > threshold` and evict it
The fix is to require the first `record_residence_event` to happen while
we already hold the layer map lock.
The API requires a ref to a `BatchedUpdates` as a witness that we are
inside a layer map lock.
That is not fool-proof, e.g., new call sites for `insert_historic` could
just completely forget to record the residence event.
It would be nice to prevent this at the type level.
In the meantime, we have a rate-limited log messages to warn us, if such
an implementation error sneaks in in the future.
fixes https://github.com/neondatabase/neon/issues/3593
fixes https://github.com/neondatabase/neon/issues/3942
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
The field means the same thing as the `wal_end` field in the XLogData
struct. And in the postgres-protocol crate's corresponding
PrimaryKeepAlive struct, it's also called `wal_end`. Let's be
consistent.
As noted by Arthur at
https://github.com/neondatabase/neon/pull/4144#pullrequestreview-1411031881
When a new connection is established to the safekeeper, the 'end_pos'
field is initially set to Lsn::INVALID (i.e 0/0). If there is no WAL to
send to the client, we send KeepAlive messages with Lsn::INVALID. That
confuses the pageserver: it thinks that safekeeper is lagging very much
behind the tip of the branch, and will reconnect to a different
safekeeper. Then the same thing happens with the new safekeeper, until
some WAL is streamed which sets 'end_pos' to a valid value.
This fix always sets `end_pos` to the most recent `commit_lsn` value.
This is useful to send the latest `commit_lsn` to the receiver, so it
will know how advanced this safekeeper compared to the others.
Fixes https://github.com/neondatabase/neon/issues/3972
Supersedes https://github.com/neondatabase/neon/pull/4144
Add essential safekeeper and pageserver::walreceiver metrics. Mostly
counters, such as the number of received queries, broker messages,
removed WAL segments, or connection switches events in walreceiver.
Also logs broker push loop duration.
Closes https://github.com/neondatabase/neon/issues/2106
Before:
```
Extracting base backup to create postgres instance: path=/Users/someonetoignore/work/neon/neon_main/test_output/test_pageserver_lsn_wait_error_safekeeper_stop/repo/endpoints/ep-2/pgdata port=15017
stderr: command failed: page server 'basebackup' command failed
Caused by:
0: db error: ERROR: Timed out while waiting for WAL record at LSN 0/FFFFFFFF to arrive, last_record_lsn 0/A2C3F58 disk consistent LSN=0/16B5A50
1: ERROR: Timed out while waiting for WAL record at LSN 0/FFFFFFFF to arrive, last_record_lsn 0/A2C3F58 disk consistent LSN=0/16B5A50
Stack backtrace:
```
After:
```
Extracting base backup to create postgres instance: path=/Users/someonetoignore/work/neon/neon/test_output/test_pageserver_lsn_wait_error_safekeeper_stop/repo/endpoints/ep-2/pgdata port=15011
stderr: command failed: page server 'basebackup' command failed
Caused by:
0: db error: ERROR: Timed out while waiting for WAL record at LSN 0/FFFFFFFF to arrive, last_record_lsn 0/A2C3F58 disk consistent LSN=0/16B5A50, WalReceiver status (update 2023-04-26 14:20:39): streaming WAL from node 12346, commit|streaming Lsn: 0/A2C3F58|0/A2C3F58, safekeeper candidates (id|update_time|commit_lsn): [(12348|14:20:40|0/A2C3F58), (12346|14:20:40|0/A2C3F58), (12347|14:20:40|0/A2C3F58)]
1: ERROR: Timed out while waiting for WAL record at LSN 0/FFFFFFFF to arrive, last_record_lsn 0/A2C3F58 disk consistent LSN=0/16B5A50, WalReceiver status (update 2023-04-26 14:20:39): streaming WAL from node 12346, commit|streaming Lsn: 0/A2C3F58|0/A2C3F58, safekeeper candidates (id|update_time|commit_lsn): [(12348|14:20:40|0/A2C3F58), (12346|14:20:40|0/A2C3F58), (12347|14:20:40|0/A2C3F58)]
Stack backtrace:
```
As the issue requests, the PR adds the context in logs only, but I think
we should expose the context via HTTP management API similar way — it
should be simple with the new API, but better be done in a separate PR.
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
If the other end of a TCP connection closes its read end of the socket,
you get an EPIPE when you try to send. I saw that happen in the CI once:
https://neon-github-public-dev.s3.amazonaws.com/reports/pr-4136/release/4869464644/index.html#suites/c19bc2126511ef8cb145cca25c438215/7ec87b016c0b4b50/
```
2023-05-03T07:53:22.394152Z ERROR Task 'serving compute connection task' tenant_id: Some(c204447079e02e7ba8f593cb8bc57e76), timeline_id: Some(b666f26600e6deaa9f43e1aeee5bacb7) exited with error: Postgres connection error
Caused by:
Broken pipe (os error 32)
Stack backtrace:
0: pageserver::page_service::page_service_conn_main::{{closure}}
at /__w/neon/neon/pageserver/src/page_service.rs:282:17
<core::panic::unwind_safe::AssertUnwindSafe<F> as core::future::future::Future>::poll
at /rustc/9eb3afe9ebe9c7d2b84b71002d44f4a0edac95e0/library/core/src/panic/unwind_safe.rs:296:9
<futures_util::future::future::catch_unwind::CatchUnwind<Fut> as core::future::future::Future>::poll::{{closure}}
at /__w/neon/neon/.cargo/registry/src/github.com-1ecc6299db9ec823/futures-util-0.3.28/src/future/future/catch_unwind.rs:36:42
<core::panic::unwind_safe::AssertUnwindSafe<F> as core::ops::function::FnOnce<()>>::call_once
at /rustc/9eb3afe9ebe9c7d2b84b71002d44f4a0edac95e0/library/core/src/panic/unwind_safe.rs:271:9
...
```
In the passing, add a comment to explain what the "expected" in the
`is_expected_io_error` function means.
wal_craft had accumulated some trouble by using `use anyhow::*;`. Fixes
that, removes redundant conversions (never need to convert a Path to
OsStr), especially at the `Process` args.
Originally in #4100 but we merged a later PR instead for the fixes. I
dropped the `postmaster.pid` polling in favor of just having a longer
connect timeout.
noticed while describing `RequestSpan`, this fix will omit the otherwise
logged message about request being cancelled when panicking in the
request handler. this was missed on #4064.
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
It's more convenient than parsing the postgresql.conf file.
Extracted from PR #3886. I started working on another patch (to make it
safe to run two "neon_local endpoint create" commands concurrently), and
realized that this change will make that simpler too.
Sentry caught a panic on load testing server related to metric removals:
https://neondatabase.sentry.io/issues/4142396994
Turn the `expect` into logging, but also add logging for each removal,
so we could identify in which cases we do double-remove. The
double-removal (or never adding) cause is not obvious or expected.
Original added in #3837.
the fix is rather indirect due to the accidental applying of too much
`anyhow`: if handle_pagerequests returns a `QueryError` it will now be
bubbled up as-is `QueryError`. `QueryError` allows the inner
`std::io::Error` to be inspected and thus we can filter certain error
kinds which are perfectly normal without a huge log message.
for a very long time (b2f5102) the errors were converted to `anyhow` by
mistake which made this difficult or impossible, even though from the
types it would *appear* that we propagate wrapped `std::io::Error`s and
can filter them.
Fixes#4113, most likely filters some other errors as well.
Add patch directive to Cargo.toml to use patched version of
sharded-slab:
98d16753ab
Patch changes the MAX_THREADS limit from 4096 to 32768. This is a
temporary workaround for using tracing from many threads in safekeepers
code, until async safekeepers patch is merged to the main.
Note that patch can affect other rust services, not only the safekeeper
binary.
Add HTTP endpoint to initialize safekeeper timeline from peer
safekeepers. This is useful for initializing new safekeeper to replace
failed safekeeper. Not fully "correct" in all cases, but should work in
most.
This code is not suitable for production workloads but can be tested on
staging to get started. New endpoint is separated from usual cases and
should not affect anything if no one explicitly uses a new endpoint. We
can rollback this commit in case of issues.
This reverts commit 732acc5.
Reverted PR: #3869
As noted in PR #4094, we do in fact try to insert duplicates to the
layer map, if L0->L1 compaction is interrupted. We do not have a proper
fix for that right now, and we are in a hurry to make a release to
production, so revert the changes related to this to the state that we
have in production currently. We know that we have a bug here, but
better to live with the bug that we've had in production for a long
time, than rush a fix to production without testing it in staging first.
Cc: #4094, #4088
As soon as we have received the SSLRequest packet, and have figured
out the hostname to connect to from the SNI, we can start passing
through data. We don't need to parse the StartupPacket that the client
will send next.
In order to not to create NodePorts for each compute we can setup
services that accept connections on wildcard domains and then use
information from domain name to route connection to some internal
service. There are ready solutions for HTTPS and TLS connections
but postgresql protocol uses opportunistic TLS and we haven't found
any ready solutions.
This patch introduces `pg_sni_router` which routes connections to
`aaa--bbb--123.external.domain` to `aaa.bbb.123.internal.domain`.
In the long run we can avoid console -> compute psql communications,
but now this router seems to be the easier way forward.
Refactors walsenders out of timeline.rs to makes it less convoluted into
separate WalSenders with its own lock, but otherwise having the same structure.
Tracking of in-memory remote_consistent_lsn is also moved there as it is mainly
received from pageserver.
State of walsender (feedback) is also restructured to be cleaner; now it is
either PageserverFeedback or StandbyFeedback(StandbyReply, HotStandbyFeedback),
but not both.
Introduce read timeouts to our `page_service` connections. Without read
timeouts, we essentially leak connections.
This is a port of #3995. Split the refactorings to the other PR: #4097.
Fixes#4028.
- Increase `connect_timeout` to 30s, which should be enough for
most of the cases
- If the script cannot connect to the DB (or any other
`psycopg2.OperationalError` occur) — do not fail the script, log
the error and proceed. Problems with fetching flaky tests shouldn't
block the PR
Refactoring part of #4093.
Numerious `Send + Sync` bounds were a distraction, that were not needed
at all. The proper `Bytes` usage and one `"error_message".to_string()`
are just drive-by fixes.
Not using the `PostgresBackendTCP` allows us to start setting read
timeouts (and more). `PostgresBackendTCP` is still used from proxy, so
it cannot be removed.
PR `build: run clippy for powerset of features (#4077)` brought us a
`clippy --release` pass.
It was merged after #4030, which fails under `clippy --release` with
```
error: static `TENANT_ID_EXTRACTOR` is never used
--> pageserver/src/tenant/timeline.rs:4270:16
|
4270 | pub static TENANT_ID_EXTRACTOR: once_cell::sync::Lazy<
| ^^^^^^^^^^^^^^^^^^^
|
= note: `-D dead-code` implied by `-D warnings`
error: static `TIMELINE_ID_EXTRACTOR` is never used
--> pageserver/src/tenant/timeline.rs:4276:16
|
4276 | pub static TIMELINE_ID_EXTRACTOR: once_cell::sync::Lazy<
| ^^^^^^^^^^^^^^^^^^^^^
```
A merge queue would have prevented this.
Notes:
- This still needs UI support from the Console
- I've not tuned any GUCs for PostgreSQL to make this work better
- Safekeeper has gotten a tweak in which WAL is sent and how: It now
sends zero-ed WAL data from the start of the timeline's first segment up to
the first byte of the timeline to be compatible with normal PostgreSQL
WAL streaming.
- This includes the commits of #3714
Fixes one part of https://github.com/neondatabase/neon/issues/769
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
- Remove repeated tenant & timeline from span
- Demote logging of the path to debug level
- Log completion at info level, in the same function where we log errors
- distinguish between layer file download success & on-demand download
succeeding as a whole in the log message wording
- Assert that the span contains a tenant id and a timeline id
fixes https://github.com/neondatabase/neon/issues/3945
Before:
```
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{tenant_id=$TENANT_ID timeline_id=$TIMELINE_ID layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: download complete: /storage/pageserver/data/tenants/$TENANT_ID/timelines/$TIMELINE_ID/000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{tenant_id=$TENANT_ID timeline_id=$TIMELINE_ID layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: Rebuilt layer map. Did 9 insertions to process a batch of 1 updates.
```
After:
```
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: layer file download finished
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: Rebuilt layer map. Did 9 insertions to process a batch of 1 updates.
INFO compaction_loop{tenant_id=$TENANT_ID}:compact_timeline{timeline=$TIMELINE_ID}:download_remote_layer{layer=000000000000000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF__00000000020C8A71-00000000020CAF91}: on-demand download successful
```
It fixes the miscalculation of the metric for projects that use multiple
branches for the same endpoint.
We were under billing users with such projects. So we need to
communicate the change in Release Notes.
It had a couple of inherent races:
1) Even if compute is killed before the call, some more data might still arrive
to safekeepers after commit_lsn on them is polled, advancing it. Then checkpoint
on pageserver might not include this tail, and so upload of expected LSN won't
happen until one more checkpoint.
2) commit_lsn is updated asynchronously -- compute can commit transaction before
communicating commit_lsn to even single safekeeper (sync-safekeepers can be used
to forces the advancement). This makes semantics of
wait_for_sk_commit_lsn_to_reach_remote_storage quite complicated.
Replace it with last_flush_lsn_upload which
1) Learns last flush LSN on compute;
2) Waits for it to arrive to pageserver;
3) Checkpoints it;
4) Waits for the upload.
In some tests this keeps compute alive longer than before, but this doesn't seem
to be important.
There is a chance this fixes https://github.com/neondatabase/neon/issues/3209
Follow-up fix after https://github.com/neondatabase/neon/pull/4067
```
+ crane tag neondatabase/vm-compute-node-v14:3064 latest
Error: fetching "neondatabase/vm-compute-node-v14:3064": GET https://index.docker.io/v2/neondatabase/vm-compute-node-v14/manifests/3064: MANIFEST_UNKNOWN: manifest unknown; unknown tag=3064
```
I reverted back the previous approach for promoting images
(login to one registry, save images to local fs, logout and login to
another registry, and push images from local fs). It turns out what
works for one Google project (kaniko), doesn't work for another (crane)
[sigh]
- Update kaniko to 1.9.2 (from 1.7.0), problem with reproducible build is fixed
- Login to ECR and Docker Hub at once, so we can push to several
registries, it makes job `push-docker-hub` unneeded
- `push-docker-hub` replaced with `promote-images` in `needs:` clause,
Pushing images to production ECR moved to `promote-images` job
## Describe your changes
Deploy `main` proxies to the preview environments
We don't deploy storage there yet, as it's tricky.
## Issue ticket number and link
https://github.com/neondatabase/cloud/issues/4737
And add corresponding unit test.
The fix is to use `.remove()` instead of `.get()` when processing the
arugments hash map.
The code uses emptiness of the hash map to determine whether all
arguments have been processed.
This was likely a copy-paste error.
refs https://github.com/neondatabase/neon/issues/3942
just record the time needed for waiting the lsn and then the basebackup
in a log message in millis. this is related to ongoing investigations to
cold start performance.
this could also be a a counter. it cannot be added next to smgr
histograms, because we don't want another histogram per timeline.
the aim is to allow drilling deeper into which timelines were slow, and
to understand why some need two basebackups.
For the "worst-case /storage usage panel", we need to compute
```
remote size + local-only size
```
We currently don't have a metric for local-only layers.
The number of in-flight layers in the upload queue is just that, so, let
Prometheus scrape it.
The metric is two counters (started and finished).
The delta is the amount of in-flight uploads in the queue.
The metrics are incremented in the respective `call_unfinished_metric_*`
functions.
These track ongoing operations by file_kind and op_kind.
We only need this metric for layer uploads, so, there's the new
RemoteTimelineClientMetricsCallTrackSize type that forces all call sites
to decide whether they want the size tracked or not.
If we find that other file_kinds or op_kinds are interesting (metadata
uploads, layer downloads, layer deletes) are interesting, we can just
enable them, and they'll be just another label combination within the
metrics that this PR adds.
fixes https://github.com/neondatabase/neon/issues/3922
Add a simple disarmable dropguard to log if request is cancelled before
it is completed. We currently don't have this, and it makes for
difficult to know when the request was dropped.
This patch extends the libmetrics logging setup functionality with a
`tracing` layer that increments a Prometheus counter each time we log a
log message. We have the counter per tracing event level. This allows
for monitoring WARN and ERR log volume without parsing the log. Also, it
would allow cross-checking whether logs got dropped on the way into
Loki.
It would be nicer if we could hook deeper into the tracing logging
layer, to avoid evaluating the filter twice.
But I don't know how to do it.
Do several attempts to get spec from the control-plane and retry network
errors and all reasonable HTTP response codes. Do not hang waiting for
spec without confirmation from the control-plane that compute is known
and is in the `Empty` state.
Adjust the way we track `total_startup_ms` metric, it should be
calculated since the moment we received spec, not from the moment
`compute_ctl` started. Also introduce a new `wait_for_spec_ms` metric
to track the time spent sleeping and waiting for spec to be delivered
from control-plane.
Part of neondatabase/cloud#3533
Changes the vm-informant's postgres connection string's dbname from
"neondb" (which sometimes doesn't exist) to "postgres" (which
_hopefully_ should exist more often?).
Currently there are a handful of VMs in prod that aren't working with
autoscaling because they don't have the "neondb" database.
The vm-informant doesn't require any database in particular; it's just
connecting as `cloud_admin` to be able to adjust the file cache
settings.
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
See https://github.com/neondatabase/neon/pull/3991
Brings the changes back with the right way to use new `toml_edit` to
deserialize values and a unit test for this.
All non-trivial updates extracted into separate commits, also `carho hakari` data and its manifest format were updated.
3 sets of crates remain unupdated:
* `base64` — touches proxy in a lot of places and changed its api (by 0.21 version) quite strongly since our version (0.13).
* `opentelemetry` and `opentelemetry-*` crates
```
error[E0308]: mismatched types
--> libs/tracing-utils/src/http.rs:65:21
|
65 | span.set_parent(parent_ctx);
| ---------- ^^^^^^^^^^ expected struct `opentelemetry_api::context::Context`, found struct `opentelemetry::Context`
| |
| arguments to this method are incorrect
|
= note: struct `opentelemetry::Context` and struct `opentelemetry_api::context::Context` have similar names, but are actually distinct types
note: struct `opentelemetry::Context` is defined in crate `opentelemetry_api`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/opentelemetry_api-0.19.0/src/context.rs:77:1
|
77 | pub struct Context {
| ^^^^^^^^^^^^^^^^^^
note: struct `opentelemetry_api::context::Context` is defined in crate `opentelemetry_api`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/opentelemetry_api-0.18.0/src/context.rs:77:1
|
77 | pub struct Context {
| ^^^^^^^^^^^^^^^^^^
= note: perhaps two different versions of crate `opentelemetry_api` are being used?
note: associated function defined here
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/tracing-opentelemetry-0.18.0/src/span_ext.rs:43:8
|
43 | fn set_parent(&self, cx: Context);
| ^^^^^^^^^^
For more information about this error, try `rustc --explain E0308`.
error: could not compile `tracing-utils` due to previous error
warning: build failed, waiting for other jobs to finish...
error: could not compile `tracing-utils` due to previous error
```
`tracing-opentelemetry` of version `0.19` is not yet released, that is supposed to have the update we need.
* similarly, `rustls`, `tokio-rustls`, `rustls-*` and `tls-listener` crates have similar issue:
```
error[E0308]: mismatched types
--> libs/postgres_backend/tests/simple_select.rs:112:78
|
112 | let mut make_tls_connect = tokio_postgres_rustls::MakeRustlsConnect::new(client_cfg);
| --------------------------------------------- ^^^^^^^^^^ expected struct `rustls::client::client_conn::ClientConfig`, found struct `ClientConfig`
| |
| arguments to this function are incorrect
|
= note: struct `ClientConfig` and struct `rustls::client::client_conn::ClientConfig` have similar names, but are actually distinct types
note: struct `ClientConfig` is defined in crate `rustls`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/rustls-0.21.0/src/client/client_conn.rs:125:1
|
125 | pub struct ClientConfig {
| ^^^^^^^^^^^^^^^^^^^^^^^
note: struct `rustls::client::client_conn::ClientConfig` is defined in crate `rustls`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/rustls-0.20.8/src/client/client_conn.rs:91:1
|
91 | pub struct ClientConfig {
| ^^^^^^^^^^^^^^^^^^^^^^^
= note: perhaps two different versions of crate `rustls` are being used?
note: associated function defined here
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/tokio-postgres-rustls-0.9.0/src/lib.rs:23:12
|
23 | pub fn new(config: ClientConfig) -> Self {
| ^^^
For more information about this error, try `rustc --explain E0308`.
error: could not compile `postgres_backend` due to previous error
warning: build failed, waiting for other jobs to finish...
```
* aws crates: I could not make new API to work with bucket endpoint overload, and console e2e tests failed.
Other our tests passed, further investigation is worth to be done in https://github.com/neondatabase/neon/issues/4008
Initially, idea was to ensure that when we come and check data
availability, special service table already contains one row. So if we
loose it for some reason, we will error out.
Yet, to do availability check we anyway start compute first! So it
doesn't really add some value, but we affect each compute start as we
update at least one row in the database. Also this writes some WAL, so
if timeline is close to `neon.max_cluster_size` it could prevent compute
from starting up.
That said, do CREATE TABLE IF NOT EXISTS + UPSERT right in the
`/check_writability` handler.
Before this patch, if a tenant would override its eviction_policy
setting to use a lower LayerAccessThreshold::threshold than the
`evictions_low_residence_duration_metric_threshold`, the evictions done
for that tenant would count towards the
`evictions_with_low_residence_duration` metric.
That metric is used to identify pre-mature evictions, commonly triggered
by disk-usage-based eviction under disk pressure.
We don't want that to happen for the legitimate evictions of the tenant
that overrides its eviction_policy.
So, this patch
- moves the setting into TenantConf
- adds test coverage
- updates the staging & prod yamls
Forward Compatibility:
Software before this patch will ignore the new tenant conf field and use
the global one instead.
So we can roll back safely.
Backward Compatibility:
Parsing old configs with software as of this patch will fail in
`PageServerConf::parse_and_validate` with error
`unrecognized pageserver option 'evictions_low_residence_duration_metric_threshold'`
if the option is still present in the global section.
We deal with this by updating the configs in Ansible.
fixes https://github.com/neondatabase/neon/issues/3940
With this commit one can request compute reconfiguration
from the running `compute_ctl` with compute in `Running` state
by sending a new spec:
```shell
curl -d "{\"spec\": $(cat ./compute-spec-new.json)}" http://localhost:3080/configure
```
Internally, we start a separate configurator thread that is waiting on
`Condvar` for `ConfigurationPending` compute state in a loop. Then it does
reconfiguration, sets compute back to `Running` state and notifies other
waiters.
It will need some follow-ups, e.g. for retry logic for control-plane
requests, but should be useful for testing in the current state. This
shouldn't affect any existing environment, since computes are configured
in a different way there.
Resolvesneondatabase/cloud#4433
To not be taken by surprise by upstream git re-tag or by malicious activity,
let's verify the checksum for extensions we download
Also, unify the installation of `pg_graphql` and `pg_tiktoken`
with other extensions.
We use the term "endpoint" in for compute Postgres nodes in the web UI
and user-facing documentation now. Adjust the nomenclature in the code.
This changes the name of the "neon_local pg" command to "neon_local
endpoint". Also adjust names of classes, variables etc. in the python
tests accordingly.
This also changes the directory structure so that endpoints are now
stored in:
.neon/endpoints/<endpoint id>
instead of:
.neon/pgdatadirs/tenants/<tenant_id>/<endpoint (node) name>
The tenant ID is no longer part of the path. That means that you
cannot have two endpoints with the same name/ID in two different
tenants anymore. That's consistent with how we treat endpoints in the
real control plane and proxy: the endpoint ID must be globally unique.
## Describe your changes
Do not forget to process required manual stuff after release
## Issue ticket number and link
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
---------
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Reason and backtrace are added to the Broken state. Backtrace is automatically collected when tenant entered the broken state. The format for API, CLI and metrics is changed and unified to return tenant state name in camel case. Previously snake case was used for metrics and camel case was used for everything else. Now tenant state field in TenantInfo swagger spec is changed to contain state name in "slug" field and other fields (currently only reason and backtrace for Broken variant in "data" field). To allow for this breaking change state was removed from TenantInfo swagger spec because it was not used anywhere.
Please note that the tenant's broken reason is not persisted on disk so the reason is lost when pageserver is restarted.
Requires changes to grafana dashboard that monitors tenant states.
Closes#3001
---------
Co-authored-by: theirix <theirix@gmail.com>
## Describe your changes
## Issue ticket number and link
#3673
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
When no SNI is provided use the default certificate, otherwise we can't
get to the options parameter which can be used to set endpoint name too.
That means that non-SNI flow will not work for CNAME domains in verify-full
mode.
All non-trivial updates extracted into separate commits, also `carho
hakari` data and its manifest format were updated.
3 sets of crates remain unupdated:
* `base64` — touches proxy in a lot of places and changed its api (by
0.21 version) quite strongly since our version (0.13).
* `opentelemetry` and `opentelemetry-*` crates
```
error[E0308]: mismatched types
--> libs/tracing-utils/src/http.rs:65:21
|
65 | span.set_parent(parent_ctx);
| ---------- ^^^^^^^^^^ expected struct `opentelemetry_api::context::Context`, found struct `opentelemetry::Context`
| |
| arguments to this method are incorrect
|
= note: struct `opentelemetry::Context` and struct `opentelemetry_api::context::Context` have similar names, but are actually distinct types
note: struct `opentelemetry::Context` is defined in crate `opentelemetry_api`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/opentelemetry_api-0.19.0/src/context.rs:77:1
|
77 | pub struct Context {
| ^^^^^^^^^^^^^^^^^^
note: struct `opentelemetry_api::context::Context` is defined in crate `opentelemetry_api`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/opentelemetry_api-0.18.0/src/context.rs:77:1
|
77 | pub struct Context {
| ^^^^^^^^^^^^^^^^^^
= note: perhaps two different versions of crate `opentelemetry_api` are being used?
note: associated function defined here
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/tracing-opentelemetry-0.18.0/src/span_ext.rs:43:8
|
43 | fn set_parent(&self, cx: Context);
| ^^^^^^^^^^
For more information about this error, try `rustc --explain E0308`.
error: could not compile `tracing-utils` due to previous error
warning: build failed, waiting for other jobs to finish...
error: could not compile `tracing-utils` due to previous error
```
`tracing-opentelemetry` of version `0.19` is not yet released, that is
supposed to have the update we need.
* similarly, `rustls`, `tokio-rustls`, `rustls-*` and `tls-listener`
crates have similar issue:
```
error[E0308]: mismatched types
--> libs/postgres_backend/tests/simple_select.rs:112:78
|
112 | let mut make_tls_connect = tokio_postgres_rustls::MakeRustlsConnect::new(client_cfg);
| --------------------------------------------- ^^^^^^^^^^ expected struct `rustls::client::client_conn::ClientConfig`, found struct `ClientConfig`
| |
| arguments to this function are incorrect
|
= note: struct `ClientConfig` and struct `rustls::client::client_conn::ClientConfig` have similar names, but are actually distinct types
note: struct `ClientConfig` is defined in crate `rustls`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/rustls-0.21.0/src/client/client_conn.rs:125:1
|
125 | pub struct ClientConfig {
| ^^^^^^^^^^^^^^^^^^^^^^^
note: struct `rustls::client::client_conn::ClientConfig` is defined in crate `rustls`
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/rustls-0.20.8/src/client/client_conn.rs:91:1
|
91 | pub struct ClientConfig {
| ^^^^^^^^^^^^^^^^^^^^^^^
= note: perhaps two different versions of crate `rustls` are being used?
note: associated function defined here
--> /Users/someonetoignore/.cargo/registry/src/github.com-1ecc6299db9ec823/tokio-postgres-rustls-0.9.0/src/lib.rs:23:12
|
23 | pub fn new(config: ClientConfig) -> Self {
| ^^^
For more information about this error, try `rustc --explain E0308`.
error: could not compile `postgres_backend` due to previous error
warning: build failed, waiting for other jobs to finish...
```
* aws crates: I could not make new API to work with bucket endpoint
overload, and console e2e tests failed.
Other our tests passed, further investigation is worth to be done in
https://github.com/neondatabase/neon/issues/4008
The PR changes module function-based walreceiver interface with a
`WalReceiver` struct that exposes a few public methods, `new`, `start`
and `stop` now.
Later, the same struct is planned to be used for getting walreceiver
stats (and, maybe, other extra data) to display during missing wal
errors for https://github.com/neondatabase/neon/issues/2106
Now though, the change required extra logic changes:
* due to the `WalReceiver` struct added, it became easier to pass `ctx`
and later do a `detached_child` instead of
bfee412701/pageserver/src/tenant/timeline.rs (L1379-L1381)
* `WalReceiver::start` which is now the public API to start the
walreceiver, could return an `Err` which now may turn a tenant into
`Broken`, same as the timeline that it tries to load during startup.
* `WalReceiverConf` was added to group walreceiver parameters from
pageserver's tenant config
Sometimes, it contained real values, sometimes just defaults if the
spec was not received yet. Make the state more clear by making it an
Option instead.
One consequence is that if some of the required settings like
neon.tenant_id are missing from the spec file sent to the /configure
endpoint, it is spotted earlier and you get an immediate HTTP error
response. Not that it matters very much, but it's nicer nevertheless.
Aarch64 doesn't implement some old syscalls like open and select. Use
openat instead of open to check if seccomp is supported. Leave both
select and pselect6 in the allowlist since we don't call select syscall
directly and may hope that libc will call pselect6 on aarch64.
To check whether some syscall is supported it is possible to use
`scmp_sys_resolver` from seccopm package:
```
> apt install seccopm
> scmp_sys_resolver -a x86_64 select
23
> scmp_sys_resolver -a aarch64 select
-10101
> scmp_sys_resolver -a aarch64 pselect6
72
```
Negative value means that syscall is not supported.
Another cross-check is to look up for the actuall syscall table in
`unistd.h`. To resolve all the macroses one can use `gcc -E` as it is
done in `dump_sys_aarch64()` function in
libseccomp/src/arch-syscall-validate.
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
TCP_KEEPALIVE is not enabled by default, so this prevents hanged up connections
in case of abrupt client termination. Add 'closed' flag to PostgresBackendReader
and pass it during handles join to prevent attempts to read from socket if we
errored out previously -- now with timeouts this is a common situation.
It looks like
2023-04-10T18:08:37.493448Z INFO {cid=68}:WAL
receiver{ttid=59f91ad4e821ab374f9ccdf918da3a85/16438f99d61572c72f0c7b0ed772785d}:
terminated: timed out
Presumably fixes https://github.com/neondatabase/neon/issues/3971
Aarch64 doesn't implement some old syscalls like open and select. Use
openat instead of open to check if seccomp is supported. Leave both
select and pselect6 in the allowlist since we don't call select syscall
directly and may hope that libc will call pselect6 on aarch64.
To check whether some syscall is supported it is possible to use
`scmp_sys_resolver` from seccopm package:
```
> apt install seccopm
> scmp_sys_resolver -a x86_64 select
23
> scmp_sys_resolver -a aarch64 select
-10101
> scmp_sys_resolver -a aarch64 pselect6
72
```
Negative value means that syscall is not supported.
Another cross-check is to look up for the actuall syscall table
in `unistd.h`. To resolve all the macroses one can use `gcc -E` as
it is done in `dump_sys_aarch64()` function in
libseccomp/src/arch-syscall-validate.
This is in preparation of using compute_ctl to launch postgres nodes
in the neon_local control plane. And seems like a good idea to
separate the public interfaces anyway.
One non-mechanical change here is that the 'metrics' field is moved
under the Mutex, instead of using atomics. We were not using atomics
for performance but for convenience here, and it seems more clear to
not use atomics in the model for the HTTP response type.
We have enabled prefetch by default, let's use this in Nightly
Benchmarks:
- effective_io_concurrency=100 by default (instead of 32)
- maintenance_io_concurrency=100 by default (instead of 32)
Rename `neon-captest-prefetch` to `neon-captest-new` (for pgbench with
initialisation) and `neon-captest-reuse` (for OLAP scenarios)
Replaces `Box<(dyn io::AsyncRead + Unpin + Send + Sync + 'static)>` with
`impl io::AsyncRead + Unpin + Send + Sync + 'static` usages in the
`RemoteStorage` interface, to make it closer to
[`#![feature(async_fn_in_trait)]`](https://blog.rust-lang.org/inside-rust/2022/11/17/async-fn-in-trait-nightly.html)
For `GenericRemoteStorage`, replaces `type Target = dyn RemoteStorage`
with another impl with `RemoteStorage` methods inside it.
We can reuse the trait, that would require importing the trait in every
file where it's used and makes us farther from the unstable feature.
After this PR, I've manged to create a patch with the changes:
https://github.com/neondatabase/neon/compare/kb/less-dyn-storage...kb/nightly-async-trait?expand=1
Current rust implementation does not like recursive async trait calls,
so `UnreliableWrapper` was removed: it contained a
`GenericRemoteStorage` that implemented the `RemoteStorage` trait, and
itself implemented the trait, which nightly rustc did not like and
proposed to box the future.
Similarly, `GenericRemoteStorage` cannot implement `RemoteStorage` for
nightly rustc to work, since calls various remote storages' methods from
inside.
I've compiled current `main` and the nightly branch both with `time env
RUSTC_WRAPPER="" cargo +nightly build --all --timings` command, and got
```
Finished dev [optimized + debuginfo] target(s) in 2m 04s
env RUSTC_WRAPPER="" cargo +nightly build --all --timings 1283.19s user 50.40s system 1074% cpu 2:04.15 total
for the new feature tried and
Finished dev [optimized + debuginfo] target(s) in 2m 40s
env RUSTC_WRAPPER="" cargo +nightly build --all --timings 1288.59s user 52.06s system 834% cpu 2:40.71 total
for the old async_trait approach.
```
On my machine, the `remote_storage` lib compilation takes ~10 less time
with the nightly feature (left) than the regular main (right).
Full cargo reports are available at
[timings.zip](https://github.com/neondatabase/neon/files/11179369/timings.zip)
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Checklist before merging
- [ ] Do not forget to reformat commit message to not include the above
checklist
Old coding here ignored non-wildcard common names and passed None instead. With my recent changes
I started throwing an error in that case. Old logic doesn't seem to be a great choice, so instead
of passing None I actually set non-wildcard common names too. That way it is possible to avoid handling
cases with None in downstream code.
This commit adds an option to start compute without spec and then pass
it a valid spec via `POST /configure` API endpoint. This is a main
prerequisite for maintaining the pool of compute nodes in the
control-plane.
For example:
1. Start compute with
```shell
cargo run --bin compute_ctl -- -i no-compute \
-p http://localhost:9095 \
-D compute_pgdata \
-C "postgresql://cloud_admin@127.0.0.1:5434/postgres" \
-b ./pg_install/v15/bin/postgres
```
2. Configure it with
```shell
curl -d "{\"spec\": $(cat ./compute-spec.json)}" http://localhost:3080/configure
```
Internally, it's implemented using a `Condvar` + `Mutex`. Compute spec
is moved under Mutex, as it's now could be updated in the http handler.
Also `RwLock` was replaced with `Mutex` because the latter works well
with `Condvar`.
First part of the neondatabase/cloud#4433
This allows to skip compatibility tests based on `CHECK_ONDISK_DATA_COMPATIBILITY` environment variable. When the variable is missing (default) compatibility tests wont be run.
Otherwise it can lag a lot, preventing WAL segments cleanup. Also max
wal_backup_lsn on update, pulling it down is pointless.
Should help with https://github.com/neondatabase/neon/issues/3957, but
will not fix it completely.
## Describe your changes
In https://github.com/neondatabase/cloud/issues/4354 we are making
scheduling of projects based on available disk space and overcommit, so
we need to know disk size and just in case instance type of the
pageserver
## Issue ticket number and link
https://github.com/neondatabase/cloud/issues/4354
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] ~If it is a core feature, I have added thorough tests.~
- [ ] ~Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?~
- [ ] ~If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.~
in real env testing we noted that the disk-usage based eviction sails 1
percentage point above the configured value, which might be a source of
confusion, so it might be better to get rid of that confusion now.
confusion: "I configured 85% but pageserver sails at 86%".
Co-authored-by: Christian Schwarz <christian@neon.tech>
Make it possible to specify directory where proxy will look up for
extra certificates. Proxy will iterate through subdirs of that directory
and load `key.pem` and `cert.pem` files from each subdir. Certs directory
structure may look like that:
certs
|--example.com
| |--key.pem
| |--cert.pem
|--foo.bar
|--key.pem
|--cert.pem
Actual domain names are taken from certs and key, subdir names are
ignored.
This PR adds posting a comment with test results. Each workflow run
updates the comment with new results.
The layout and the information that we post can be changed to our needs,
right now, it contains failed tests and test which changes status after
rerun (i.e. flaky tests)
This PR adds a plugin that automatically reruns (up to 3 times) flaky
tests. Internally, it uses data from `TEST_RESULT_CONNSTR` database and
`pytest-rerunfailures` plugin.
As the first approximation we consider the test flaky if it has failed on
the main branch in the last 10 days.
Flaky tests are fetched by `scripts/flaky_tests.py` script (it's
possible to use it in a standalone mode to learn which tests are flaky),
stored to a JSON file, and then the file is passed to the pytest plugin.
In S3, pageserver only lists tenants (prefixes) on S3, no other keys.
Remove the list operation from the API, since S3 impl does not seem to
work normally and not used anyway,
For some reason, `tracing::instrument` proc_macro doesn't always print
elements specified via `fields()` or even show that it's impossible
(e.g. there's no Display impl).
Work around this using the `?foo` notation.
Before:
2023-04-03T14:48:06.017504Z INFO handle_client🤝 received SslRequest
After:
2023-04-03T14:51:24.424176Z INFO handle_client{session_id=7bd07be8-3462-404e-8ccc-0a5332bf3ace}🤝 received SslRequest
Leave disk_usage_based_eviction above the current max usage in prod
(82%ish), so that deploying this commit won't trigger
disk_usage_based_eviction.
As indicated in the TODO, we'll decrease the value to 80% later.
Also update the staging YAMLs to use the anchor syntax for
`evictions_low_residence_duration_metric_threshold` like we do in the
prod YAMLs as of this patch.
this will help log analysis with the counterpart of already logging all
remote download needs and downloads. ended up with a easily regexable
output in the final round.
This is the the feedback originating from pageserver, so change previous
confusing names to
s/ReplicationFeedback/PageserverFeedback
s/ps_writelsn/last_receive_lsn
s/ps_flushlsn/disk_consistent_lsn
s/ps_apply_lsn/remote_consistent_lsn
I haven't changed on the wire format to keep compatibility. However,
understanding of new field names is added to compute, so once all computes
receive this patch we can change the wire names as well. Safekeepers/pageservers
are deployed roughly at the same time and it is ok to live without feedbacks
during the short period, so this is not a problem there.
Add a condition to switch walreceiver connection to safekeeper that is
located in the same availability zone. Switch happens when commit_lsn of
a candidate is not less than commit_lsn from the active connection. This
condition is expected not to trigger instantly, because commit_lsn of a
current connection is usually greater than commit_lsn of updates from
the broker. That means that if WAL is written continuously, switch can
take a lot of time, but it should happen eventually.
Now protoc 3.15+ is required for building neon.
Fixes https://github.com/neondatabase/neon/issues/3200
Instead of checking neon.safekeepers GUC value in existing pg node data dir,
just always run sync-safekeepers when safekeepers are configured. Without this
change, creation of new compute didn't run it. That's ok for new
timeline/branch (it doesn't return anything useful anyway, and LSN is known by
pageserver), but restart of compute for existing timeline bore the risk of
getting basebackup not on the latest LSN, i.e. basically broken -- it might not
have prev_lsn, and even if it had, walproposer would complain anyway.
fixes https://github.com/neondatabase/neon/issues/2963
This patch adds a pageserver-global background loop that evicts layers
in response to a shortage of available bytes in the $repo/tenants
directory's filesystem.
The loop runs periodically at a configurable `period`.
Each loop iteration uses `statvfs` to determine filesystem-level space
usage. It compares the returned usage data against two different types
of thresholds. The iteration tries to evict layers until app-internal
accounting says we should be below the thresholds. We cross-check this
internal accounting with the real world by making another `statvfs` at
the end of the iteration. We're good if that second statvfs shows that
we're _actually_ below the configured thresholds. If we're still above
one or more thresholds, we emit a warning log message, leaving it to the
operator to investigate further.
There are two thresholds:
- `max_usage_pct` is the relative available space, expressed in percent
of the total filesystem space. If the actual usage is higher, the
threshold is exceeded.
- `min_avail_bytes` is the absolute available space in bytes. If the
actual usage is lower, the threshold is exceeded.
The iteration evicts layers in LRU fashion with a reservation of up to
`tenant_min_resident_size` bytes of the most recent layers per tenant.
The layers not part of the per-tenant reservation are evicted
least-recently-used first until we're below all thresholds. The
`tenant_min_resident_size` can be overridden per tenant as
`min_resident_size_override` (bytes).
In addition to the loop, there is also an HTTP endpoint to perform one
loop iteration synchronous to the request. The endpoint takes an
absolute number of bytes that the iteration needs to evict before
pressure is relieved. The tests use this endpoint, which is a great
simplification over setting up loopback-mounts in the tests, which would
be required to test the statvfs part of the implementation. We will rely
on manual testing in staging to test the statvfs parts.
The HTTP endpoint is also handy in emergencies where an operator wants
the pageserver to evict a given amount of space _now. Hence, it's
arguments documented in openapi_spec.yml. The response type isn't
documented though because we don't consider it stable. The endpoint
should _not_ be used by Console but it could be used by on-call.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Dmitry Rodionov <dmitry@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
## Describe your changes
Fix prefetch for parallel bitmap scan
## Issue ticket number and link
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Currently we don't see from the logs, if shutting down tracing takes
long time or not. We do see that shutting down computes gets delayed for
some reason and hits thhe grace period limit. Moving the shutdown
message to slightly later, when we don't have anything else than just
exit left.
## Issue ticket number and link
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Before this patch, the range from which the random delay is picked is at
minimum 10 seconds.
With this patch, they delay is bounded to whatever the given `period`
is, and zero, if period id Duration::ZERO.
Motivation for this: the disk usage eviction tests that we'll add in
https://github.com/neondatabase/neon/pull/3905 need to wait for the disk
usage eviction background loop to do its job.
They set a period of 1s.
It seems wasteful to wait 10 seconds in the tests.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Describe your changes
Get rid of the legacy labeling. Aslo `neon_region_slug` with the same
value as `neon_region` doesn't make much sense, so just drop it. This
allows us to drop the relabeling from zenith to neon in the log
collector.
## Describe your changes
In [this linter
run](https://github.com/neondatabase/cloud/actions/runs/4553032319/jobs/8029101300?pr=4391)
accidentally found out that spec is invalid. Reference other schemas in
properties should be done the way I changed.
Could not find documentation specifically for schemas embedding in
`components.schemas`, but it seems like the approach is inherited from
json schema:
https://json-schema.org/understanding-json-schema/structuring.html#ref
## Issue ticket number and link
-
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] ~If it is a core feature, I have added thorough tests.~
- [ ] ~Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?~
- [ ] ~If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.~
With fresh rustc brought by
https://github.com/neondatabase/neon/pull/3902, we can use
`std::pin::pin!` macro instead of the tokio one.
One place did not need the macro at all, other places were adjusted.
neon_local sends SIGQUIT, which otherwise dumps core by default. Also, remove
obsolete install_shutdown_handlers; in all binaries it was overridden by
ShutdownSignals::handle later.
ref https://github.com/neondatabase/neon/issues/3847
## Describe your changes
Monitor free spae in local file system and shrink local file cache size
if it is under watermark.
Neon is using local storage for temp files (temp table + intermediate
results), unlogged relations
and local file cache.
Ideally all space not used for temporary files should be used for local
file cache.
Temporary files and even unlogged relation are intended to have small
life time (because
them can be lost at any moment in case of compute restart).
So the policy is to overcommit local cache size and shrink it if there
is not enough free space.
As far as temporary files are expected to be needed for a short time,
there i no need
to permanently shrink local file cache size. Instead of it, we just
throw away least recently accessed elements
from local file cache, releasing some space on the local disk.
## Issue ticket number and link
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: sharnoff <sharnoff@neon.tech>
As of #3867, we do artificial layer accesses to layers that will be
needed after the next restart, but not until then because of caches.
With this patch, we also do that for the accesses that the synthetic
size calculation worker does if consumption metrics are enabled.
The actual size calculation is not of importance, but we need to
calculate all of the sizes, so we only call tenant::size::gather_inputs.
Co-authored-by: Christian Schwarz <christian@neon.tech>
Without this, we run it every p.period, which can be quite low. For
example, the running experiment with 3000 tenants in prod uses a period
of 1 minute.
Doing it once per p.threshold is enough to prevent eviction.
fix synthetic size for (last_record_lsn - gc_horizon) < initdb_lsn
Assume a single-timeline project.
If the gc_horizon covers all WAL (last_record_lsn < gc_horizon)
but we have written more data than just initdb, the synthetic
size calculation worker needs to calculate the logical size
at LSN initdb_lsn (Segment BranchStart).
Before this patch, that calculation would incorrectly return
the initial logical size calculation result that we cache in
the Timeline::initial_logical_size. Presumably, because there
was confusion around initdb_lsn vs. initial size calculation.
The fix is to only hand out the initialized_size() only if
the LSN matches.
The distinction in the metrics between "init logical size" and "logical
size" was also incorrect because of the above. So, remove it.
There was a special case for `size != 0`. This was to cover the case of
LogicalSize::empty_initial(), but `initial_part_end` is `None` in that
case, so the new `LogicalSize::initialized_size()` will return None
in that case as well.
Lastly, to prevent confusion like this in the future, rename all
occurrences of `init_lsn` to either just `lsn` or a more specific name.
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
whoami() was never called, 'is_test' was never set.
'restart()' might be useful, but it wasn't hooked up the CLI so it was
dead code. It's not clear what kind of a restart it should perform,
anyway: just restart Postgres, or re-initialize the data directory
from a fresh basebackup like "stop"+"start" does.
To avoid re-downloading evicted files on restart, re-compute logical
size and partitioning before each threshold based eviction run.
Cc: #3802
Co-authored-by: Christian Schwarz <christian@neon.tech>
* Add the REPOSITORY env to build args to avoid the following error when
executing without the credentials for the repository.
```
ERROR: Service 'compute' failed to build: Head
"https://369495373322.dkr.ecr.eu-central-1.amazonaws.com/v2/compute-node-v15/manifests/2221":
no basic auth credentials
```
* update the tag version in the documentation to support storage broker
## Describe your changes
Added a query param to detach API
Allow to remove local state of a tenant even if its not in the memory
(following ignore API)
## Issue ticket number and link
#3828
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Kirill Bulatov <kirill@neon.tech>
The PR enforces current newest `index_part.json` format in the type
system (version `1`), not allowing any previous forms of it, that were
used in the past.
Similarly, the code to mitigate the
https://github.com/neondatabase/neon/issues/3024 issue is now also
removed.
Current code does not produce old formats and extra files in the
index_part.json, in the future we will be able to use
https://github.com/neondatabase/aversion or other approach to make
version transitions more explicit.
See https://neondb.slack.com/archives/C033RQ5SPDH/p1679134185248119 for
the justification on the breaking changes.
We read the pageserver connection string from the spec file, so let's
read the auth token from the same place.
We've been talking about pre-launching compute nodes that are not
associated with any particular tenant at startup, so that the spec
file is delivered to the compute node later. We cannot change the env
variables after the process has been launched.
We still pass the token to 'postgres' binary in the NEON_AUTH_TOKEN
env variable, but compute_ctl is now responsible for setting it.
## Describe your changes
https://neondb.slack.com/archives/C039YKBRZB4/p1679413279637059
## Issue ticket number and link
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
- Remove the neon.safekeeper_token_env GUC. It was used to set the
name of an environment variable, which was then used in pageserver
and safekeeper connection strings to in place of the
password. Instead, always look up the environment variable called
NEON_AUTH_TOKEN. That's what neon.safekeeper_token_env was always
set to in practice, and I don't see the need for the extra level of
indirection or configurability.
- Instead of substituting $NEON_AUTH_TOKEN in the connection strings,
pass $NEON_AUTH_TOKEN "out-of-band" as the password, when we connect
to the pageserver or safekeepers. That's simpler.
- Also use the password from $NEON_AUTH_TOKEN in compute_ctl, when it
connects to the pageserver to get the "base backup".
Walproposer used to live in the backend, while pagestore_smgr was an
extension. But now that both are part of the neon extension,
walproposer can access the same 'neon_tenant' and 'neon_timeline'
variables as the pageserver_smgr code.
This patch adds two metrics that will enable us to detect *thrashing* of
layers, i.e., repetitions of `eviction, on-demand-download, eviction,
... ` for a given layer.
The first metric counts all layer evictions per timeline. It requires no
further explanation. The second metric counts the layer evictions where
the layer was resident for less than a given threshold.
We can alert on increments to the second metric. The first metric will
serve as a baseline, and further, it's generally interesting, outside of
thrashing.
The second metric's threshold is configurable in PageServerConf and
defaults to 24h. The threshold value is reproduced as a label in the
metric because the counter's value is semantically tied to that
threshold. Since changes to the config and hence the label value are
infrequent, this will have low storage overhead in the metrics storage.
The data source to determine the time that the layer was resident is the
file's `mtime`. Using `mtime` is more of a crutch. It would be better if
Pageserver did its own persistent bookkeeping of residence change events
instead of relying on the filesystem. We had some discussion about this:
https://github.com/neondatabase/neon/pull/3809#issuecomment-1470448900
My position is that `mtime` is good enough for now. It can theoretically
jump forward if someone copies files without resetting `mtime`. But that
shouldn't happen in practice. Note that moving files back and forth
doesn't change `mtime`, nor does `chown` or `chmod`. Lastly, `rsync -a`,
which is typically used for filesystem-level backup / restore, correctly
syncs `mtime`.
I've added a label that identifies the data source to keep options open
for a future, better data source than `mtime`. Since this value will
stay the same for the time being, it's not a problem for metrics
storage.
refs https://github.com/neondatabase/neon/issues/3728
The control plane currently only supports EdDSA. We need to either teach
the storage to use EdDSA, or the control plane to use RSA. EdDSA is more
modern, so let's use that.
We could support both, but it would require a little more code and tests,
and we don't really need the flexibility since we control both sides.
This allows you to run without the 'openssl' binary as long as you
don't enable authentication. This becomes more important with the next
commit, which switches the JWT algorithm to EdDSA. LibreSSL does not
support EdDSA, and LibreSSL comes with macOS, so the next commit makes
it much more likely for the key generation to fail for macOS users.
To allow running without a keypair, don't generate the authentication
token in the 'neon_local init' step. Instead, generate a new token on
every request that needs one, using the private key.
Shrinks the total number of metrics collected for each timeline by
about 50%.
See https://github.com/neondatabase/neon/issues/2848. This doesn't fully
solve the problem, we still collect a lot of metrics even with this, but
this gives us a lot of headroom.
## Describe your changes
Add Error enum for tenant state response to allow better error handling
in mgmt api
## Issue ticket number and link
#2238
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Re-enable cgroup shenanigans in VMs, with some special care taken to
make sure that our version of cgroup-tools supports cgroup v2 (debian
bullseye does not, and probably won't because it requires a breaking
change in libcgroup).
This involves manually building libcgroup / cgroup-tools from source,
then copying the output into the final build stage.
We originally considered pulling the package from debian's testing repo
(which is up-to-date), but decided against it. Refer to the PR for more
details.
Prior work, for reference:
* 2153d2e0 - Run compute_ctl in a cgroup in VMs
* 1360361f - Fix missing VM cgconfig.conf
* 8dae8799 - Disable VM cgroup shenanigans
Create `safekeeper_pg_io_bytes_total` metric to track total amount of
bytes written/read in a postgres connections to safekeepers. This metric
has the following labels:
- `client_az` – availability zone of the connection initiator, or
`"unknown"`
- `sk_az` – availability zone of the safekeeper, or `"unknown"`
- `app_name` – `application_name` of the postgres client
- `dir` – data direction, either `"read"` or `"write"`
- `same_az` – `"true"`, `"false"` or `"unknown"`. Can be derived from
`client_az` and `sk_az`, exists purely for convenience.
This is implemented by passing availability zone in the connection
string, like this: `-c tenant_id=AAA timeline_id=BBB
availability-zone=AZ-1`.
Update ansible deployment scripts to add availability_zone argument
to safekeeper and pageserver in systemd service files.
this failure case was probably introduced by b220ba6, because earlier
the gc would always have run fast enough for restart every 1s. however,
test got added later, so we have just been lucky.
fixes#3824 by allowing this error to happen.
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
This makes it possible to enable authentication only for the mgmt HTTP
API or the compute API. The HTTP API doesn't need to be directly
accessible from compute nodes, and it can be secured through network
policies. This also allows rolling out authentication in a piecemeal
fashion.
Otherwise they get lost. Normally buffer is empty before proxy pass, but this is
not the case with pipeline mode of out npm driver; fixes connection hangup
introduced by b80fe41af3 for it.
fixes https://github.com/neondatabase/neon/issues/3822
There was a warning for trailing garbage after end-of-tar archive, but
it didn't always work. The reason is that we created a StreamReader
over the original copyin-stream, but performed the check for garbage
on the copyin-stream. There could be some garbage bytes buffered in
the StreamReader, which were not caught by the warning.
I considered turning the the warning into a fatal error, aborting the
import, but I wasn't sure if we handle aborting the import properly.
Do we clean up the timeline directory on error? If we don't, we should
make that more robust, but that's a different story.
Also, normally a valid tar archive ends with two 512-byte blocks of zeros.
The tokio_tar crate stops at the first all-zeros block. Read and check
the second all-zeros block, and error out if it's not there, or contains
something unexpected.
## Describe your changes
When we perform partitioning of the whole key space, we take in account
actual ranges of relation present in the database. So if we have
relation with relid=1 and size 100 and relation with relid=2 with size
200 then result of KeySpace::partition may contain partitions
<100000000..100000099> and <200000000..200000199>. Generated image
layers will contain the same boundaries.
But when GC is checking image coverage to find out of old layer is fully
covered by newer image layer and so can be deleted, it takes in account
only full key range. I.e. if there is delta layer <100000000..300000000>
then it never be garbage collected because image layers
<100000000..100000099> and <200000000..200000199> are not completely
covering it.This is how it looks in practice:
000000067F000032AC00000A300000000000-000000067F000032AC00000A330000000000__000000000F761828
000000067F000032AC00000A31000000001F-000000067F000032AC00000A620000000005__0000000001696070-000000000442A551
000000067F000032AC00000A3300FFFFFFFF-000000067F000032AC00000A650100000000__000000000F761828
So there are two image layers covering delta layer but ... there is a
hole: A330000000000...A3300FFFFFFFF and as a result delta layer is not
collected.
## Issue ticket number and link
This PR is deeply related with #3673 because it is addressing the same
problem: old layers are not utilized by GC.
The test test_gc_old_layers.py in #3673 can be used to see effect of
this patch.
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
- handle automatically fixable future clippies
- tune run-clippy.sh to remove macos specifics which we no longer have
Co-authored-by: Alexander Bayandin <alexander@neon.tech>
## Describe your changes
We have previously changed the neon-proxy to use RollingUpdate. This
should be enabled in legacy proxy too in order to avoid breaking
connections for the clients and allow for example backups to run even
during deployment. (https://github.com/neondatabase/neon/pull/3683)
## Issue ticket number and link
https://github.com/neondatabase/neon/issues/3333
in prev implementation, an `ok_or_else(...)?` is used to cause a
"precondition error" on LayerMap::replace, however we only see this
particular error if an L0 for which replace fails is not in the layermap
because it is not in `l0_delta_layers`. changes or fixes this to be
Replacement::NotFound instead, making it more clear that an error would
only be raised for actual preconditions, like trying to replace layer
with completly unrelated layer.
## Describe your changes
Do not pin current block in BlockCursor
## Issue ticket number and link
See #3712
There are places (see get_reconstruct_data) in our code when thread is
holding read layers lock and then try to read file and so lock page
cache slot. So we have edge in dependency graph layers->page cache slot.
At the same time (as Christian noticed) we can lock page cache slot in
BlockCursor and then try obtain shard lock on layers.
So there is backward edge in dependency graph page cache slot>layers
which forms loop and may cause deadlock.
There are three possible fixes of the problem:
1. Perform compaction under `layers` shared lock. See PR #3732. It fixes
the problem but make it not possible to append any data to pageserver
until compaction is completed.
2. Do not hold `layers` lock while accessing layers (not sure if it is
possible to do because it definitely introduce some new race
conditions).
3. Do not pin current pages in BockCursor (this PR).
My experiments shows that this cache in BlockCursor is not so useful:
the number of hits/misses for cursor cache on pgbench workload (-i -s
10/-c 10 -T 100/-c 10 -S -T 100):
```
hits: 163011
misses: 1023602
```
So number of cache misses is 10x times larger.
And results for read-only pgbench are mostly the same:
```
with cache: 14581
w/out cache: 14429
```
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
I moved management API v2 to ogen and the generated code seems to be
more strict about content type. Let's set it properly as it is json
after all
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Adds two new *global* metrics:
- pageserver_remote_ondemand_downloaded_layers_total
- pageserver_remote_ondemand_downloaded_bytes_total
An existing test is repurposed once more to check that we do get some
reasonable counts. These are to replace guessing from the nic RX bytes
metric how much was on-demand downloaded.
First part of #3745: This does not add the "(un)?avoidable" metric,
which I plan to add as a new metric, which will be a subset of the
counts of the metrics added here.
After enabling autoscaling, we faced the issue that customers are not
able to get the number of CPUs they use at this moment. Therefore I've
added these two options:
1. Postgresql function to allow customers to call it whenever they want
2. `compute_ctl` endpoint to show these number in console
Recently added `unsafe-postgres` feature allows to build pgx extensions
against postgres forks that decided to change their ABI name (like us).
With that we can build extensions without forking them and using stock
pgx. As this feature is new few manual version bumps were required.
Previously, we only accepted RS256. Seems like a pointless limitation,
and when I was testing it with RS512 tokens, it took me a while to
understand why it wasn't working.
Since we allow switching endpoints between different branches, it is important to use composite key.
Otherwise, we may try to calculate delta between metric values for two different branches.
…start transparent for clients
## Describe your changes
Try to reestablish connection with pageserver if send is failed to be
able to make pageserver restart transparent for client
## Issue ticket number and link
https://github.com/neondatabase/neon/issues/1138
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Heikki Linnakangas <heikki@neon.tech>
1) Remove allocation and data copy during each message read. Instead, parsing
functions now accept BytesMut from which data they form messages, with
pointers (e.g. in CopyData) pointing directly into BytesMut buffer. Accordingly,
move ConnectionError containing IO error subtype into framed.rs providing this
and leave in pq_proto only ProtocolError.
2) Remove anyhow from pq_proto.
3) Move FeStartupPacket out of FeMessage. Now FeStartupPacket::parse returns it
directly, eliminating dead code where user wants startup packet but has to match
for others.
proxy stream.rs is adapted to framed.rs with minimal changes. It also benefits
from framed.rs improvements described above.
- Add support for splitting async postgres_backend into read and write halfes.
Safekeeper needs this for bidirectional streams. To this end, encapsulate
reading-writing postgres messages to framed.rs with split support without any
additional changes (relying on BufRead for reading and BytesMut out buffer for
writing).
- Use async postgres_backend throughout safekeeper (and in proxy auth link
part).
- In both safekeeper COPY streams, do read-write from the same thread/task with
select! for easier error handling.
- Tidy up finishing CopyBoth streams in safekeeper sending and receiving WAL
-- join split parts back catching errors from them before returning.
Initially I hoped to do that read-write without split at all, through polling
IO:
https://github.com/neondatabase/neon/pull/3522
However that turned out to be more complicated than I initially expected
due to 1) borrow checking and 2) anon Future types. 1) required Rc<Refcell<...>>
which is Send construct just to satisfy the checker; 2) can be workaround with
transmute. But this is so messy that I decided to leave split.
To untie cyclic dependency between sync and async versions of postgres_backend,
copy QueryError and some logging/error routines to postgres_backend.rs. This is
temporal glue to make commits smaller, sync version will be dropped by the
upcoming commit completely.
This commit adds a basic HTTP API endpoint that allows scraping the
`pg_stat_statements` data and getting a list of slow queries. New
insights like cache hit rate and so on could be added later.
Extension `pg_stat_statements` is checked / created only if compute
tries to load the corresponding shared library. The latter is configured
by control-plane and currently covered with feature flag.
Co-authored by Eduard Dyckman (bird.duskpoet@gmail.com)
Adds a newtype that creates a span with request_id from
https://github.com/neondatabase/neon/pull/3708 for every HTTP request
served.
Moves request logging and error handlers under the new wrapper, so every request-related event now is logged under the request span.
For compatibility reasons, error handler is left on the general router, since not every service uses the new handler wrappers yet.
We have a few tests that try to set image_creation_threshold, but it
didn't actually have any effect because we were missing some critical
code to load the setting from config file into memory.
The two modified tests in `test_remote_storage.py perform
compaction and GC, and assert that GC removes some layers. That
only happens if new image layers are created by the
compaction. The tests explicitly disabled image layer creation by
setting image_creation_threshold to a high value, but it didn't
take effect because reading image_creation_threshold from config
file was broken, which is why the test worked. Fix the test to
set image_creation_threshold low, instead, so that GC has work to
do.
Change 'test_tenant_conf.py' so that it exercises the added code.
This might explain why we're apparently missing test coverage for GC
(issue #3415), although I didn't try to address that here, nor did I
check if this improves the it.
## Describe your changes
Adds a field to the OpenAPI spec for the page server which describes the
`do_gc` command.
## Issue ticket number and link
#3669
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
* Stop allocating and maintaining 128MB hash table for last written
LSN cache as it is not needed in wal-redo.
* Do not require access to the initialized data directory. That
saves few dozens megabytes of empty but initialized data directory.
Currently such directories do occupy about 10% of the disk space
on the pageservers as most of tenants are empty.
* Move shmem-initialization code to the extension instead of postgres
The test already allows the background thread trying to checkpoint to
fail, however the resulting log message is currently not allowed thus
causing flakyness.
Before this patch, persistent peer_horizon_lsn was always sent to walproposer,
making it initially calculate it equal to max of persistent values and in turn
pulling back the in memory value. Send instead in memory value and take max when
safekeeper sets it.
closes https://github.com/neondatabase/neon/issues/3752
## Describe your changes
Adding a timeout handling for the remote download of layers of 120
seconds for each operation
Note that these downloads are being retried for N times
## Issue ticket number and link
Fixes: #3672
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
---------
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Describe your changes
Restart walredo process an d retry applying walredo records i case of
abnormal walredo process termination
## Issue ticket number and link
See #1700
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Commit
0cf7fd0fb8
Compaction with on-demand download (#3598)
introduced a subtle bug: if we don't have to do on-demand downloads,
we only take one ROUND in fn compact() and exit early.
Thereby, we miss scheduling the index part upload for any layers
created by fn compact_inner().
Before that commit, we didn't have this problem.
So, this patch fixes it.
Since no regression test caught this, I went ahead and extended the
timeline size tests to assert that, if remote storage is configured,
1. pageserver_remote_physical_size matches the other physical sizes
2. file sizes reported by the layer map info endpoint match the other
physical size metrics
Without the pageserver code fix, the regression test would
fail at the physical size assertion, complaining that
any of the resident physical size != remote physical size metric
50790400.0 != 18399232.0
I figured out what the problem is by comparing the remote storage
and local directories like so, and noticed that the image layer
in the local directory wasn't present on the remote side.
It's size was exactly the difference
50790400.0 - 18399232.0 =32391168.0
fixes https://github.com/neondatabase/neon/issues/3738
- use parse_metrics() in all places where we parse Prometheus metrics
- query_all: make `filter` argument optional
- encourage using properly parsed, typed metrics by changing get_metrics()
to return already-parsed metrics. The new get_metric_str() method,
like in the Safekeeper type, returns the raw text response.
Before this patch, GC would call PersistentLayer::delete()
on every GC'ed layer.
RemoteLayer::delete() returned Ok(()) unconditionally.
GC would then proceed by decrementing the resident size metric,
even though the layer is a RemoteLayer.
This patch makes the following changes:
- Rename PersistentLayer::delete() to delete_resident_layer_file().
That name is unambiguous.
- Make RemoteLayer::delete_resident_layer_file return an Err().
We would have uncovered this bug if we had done that from the start.
- Change GC / Timeline::delete_historic_layer check whether
the layer is remote or not, and only call delete_resident_layer_file()
if it's not remote. This brings us in line with how eviction does it.
- Add a regression test.
fixes https://github.com/neondatabase/neon/issues/3722
Without this change, when actually setting this conf opt, the tenant
would become Broken next time we load it.
Why?
The serde_toml representation that persist_tenant_conf would write out
would be a TOML inline table of `secs` and `nsecs`.
But our hand-rolled TenantConf parser expects a TOML string.
I checked that all other `Duration` values in TenantConfOpt
use the humantime serialization.
Issues like this would likely be systematically prevent by
https://github.com/neondatabase/neon/issues/3682
## Describe your changes
## Issue ticket number and link
#3479
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Describe your changes
Rebase vendored PostgreSQL onto 14.7 and 15.2
## Issue ticket number and link
#3579
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [x] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
```
The version of PostgreSQL that we use is updated to 14.7 for PostgreSQL
14 and 15.2 for PostgreSQL 15.
```
We started rather frequently scrap some apis for metadata. This includes
layer eviction tester, I believe console does that too.
It should eliminate these logs:
https://neonprod.grafana.net/goto/rr_ace1Vz?orgId=1 (Note the rate
around 2k messages per minute)
## Describe your changes
This is yet another attempt to address problem with storage size
ballooning #2948
Previous PR #3348 tries to address this problem by maintaining list of
holes for each layer.
The problem with this approach is that we have to load all layer on
pageserver start.
Lazy loading of layers is not possible any more.
This PR tries to collect information of N largest holes on compaction
time and exclude this holes from produced layers.
It can cause generation of larger number of layers (up to 2 times) and
producing small layers.
But it requires minimal changes in code and doesn't affect storage
format.
For graphical explanation please see thread:
https://github.com/neondatabase/neon/pull/3597#discussion_r1112704451
## Issue ticket number and link
#2948#3348
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Describe your changes
When we deploy the proxy with the default Recreate strategy, there's
always some downtime and existing connections will be shut down. Change
the strategy to RollingUpdate and delay the kill signal by one week. AWS
Network Loadbalancer keeps the existing connections alive for as long as
the pods are alive, but will direct new connections to new pods.
## Issue ticket number and link
https://github.com/neondatabase/neon/issues/3333
previously we applied the ratelimiting only up to receiving the headers
from s3, or somewhere near it. the commit adds an adapter which carries
the permit until the AsyncRead has been disposed.
fixes#3662.
Calculation of logical size is now async because of layer downloads, so
we shouldn't use spawn_blocking for it. Use of `spawn_blocking`
exhausted resources which are needed by `tokio::io::copy` when copying
from a stream to a file which lead to deadlock.
Fixes: #3657
these are happening in tests because of #3655 but they sure took some
time to appear.
makes the `Compaction failed, retrying in 2s: Cannot run compaction
iteration on inactive tenant` into a globally allowed error, because it
has been seen failing on different test cases.
## Describe your changes
Layer for building pg extensions written on Rust
It required forking:
* `cargo-pgx` (in order not to catch an ABI mismatch error (`cargo-pgx`
hardcoded ABI tcdi/pgx#1032)
* `pg_jsonschema` (to use forked `cargo-pgx` version)
* `pgx-contrib-spiext` (to use forked `cargo-pgx`)
* `pg_graphql` (to use forked `cargo-pgx` and `pgx-contrib-spiext`
version)
Before the patch:
```
postgres=# create extension pg_jsonschema;
2023-02-02 17:45:23.120 UTC [35] ERROR: incompatible library "/usr/local/lib/pg_jsonschema.so": ABI mismatch
2023-02-02 17:45:23.120 UTC [35] DETAIL: Server has ABI "Neon Postgres", library has "PostgreSQL".
2023-02-02 17:45:23.120 UTC [35] STATEMENT: create extension pg_jsonschema;
ERROR: incompatible library "/usr/local/lib/pg_jsonschema.so": ABI mismatch
DETAIL: Server has ABI "Neon Postgres", library has "PostgreSQL".
```
After
```
postgres=# create extension pg_jsonschema;
CREATE EXTENSION
postgres=# select json_matches_schema('{"type": "object"}', '{}');
json_matches_schema
---------------------
t
postgres=# create extension pg_graphql;
CREATE EXTENSION
postgres=# create table book(id int primary key, title text);
CREATE TABLE
postgres=# insert into book(id, title) values (1, 'book 1');
INSERT 0 1
postgres=# select graphql.resolve($$
query {
bookCollection {
edges {
node {
id
}
}
}
}
$$);
resolve
----------------------------------------------------------------
{"data": {"bookCollection": {"edges": [{"node": {"id": 1}}]}}}
(1 row)
```
## Issue ticket number and link
Closes#3429, #3096
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [x] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [x] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
`pg_jsonschema` extension will be available for our customers
Enables tracing panic hook in addition to pageserver introduced in
#3475:
- proxy
- safekeeper
- storage_broker
For proxy, a drop guard which resets the original std panic hook was
added on the first commit. Other binaries don't need it so they never
reset anything by `disarm`ing the drop guard.
The aim of the change is to make sure all panics a) have span
information b) are logged similar to other messages, not interleaved
with other messages as happens right now. Interleaving happens right now
because std prints panics to stderr, and other logging happens in
stdout. If this was handled gracefully by some utility, the log message
splitter would treat panics as belonging to the previous message because
it expects a message to start with a timestamp.
Cc: #3468
console-release.local is legacy manual CNAME to
neon-internal-api.aws.neon.tech in r53
We could use neon-internal-api.aws.neon.tech name directly
This already was deployed to staging in
https://github.com/neondatabase/neon/pull/3642
`console-staging.local` is legacy manual CNAME to
`neon-internal-api.aws.neon.build` in r53
We could use `neon-internal-api.aws.neon.build` name directly
## Describe your changes
Since the current default gc period is set to 1 hour, whenever there is
an immediate need to reduce PITR and run gc, the user has to wait 1 hour
for PITR change to take effect
By enabling this API the user can configure PITR and immediately call
the do_gc API to trigger gc
## Issue ticket number and link
#3590
## Checklist before requesting a review
- [X] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
## Describe your changes
test_on_demand_download is flaky because not waiting until created image
layer is transferred to S3.
test_tenants_with_remote_storage just leaves garbage at the end of
overwritten file.
Right solution for test_on_demand_download is to add some API call to
wait completion of synchronization with S3 (not just based on last
record LSN). But right now it is solved using sleep.
## Issue ticket number and link
#3209
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
On the surface, this doesn't add much, but there are some benefits:
* We can do graceful shutdowns and thus record more code coverage data.
* We now have a foundation for the more interesting behaviors, e.g. "stop
accepting new connections after SIGTERM but keep serving the existing ones".
* We give the otel machinery a chance to flush trace events before
finally shutting down.
This commit sets up OpenTelemetry tracing and exporter, so that they
can be exported as OpenTelemetry traces as well.
All outgoing HTTP requests will be traced. A separate (child)
span is created for each outgoing HTTP request, and the tracing
context is also propagated to the server in the HTTP headers.
If tracing is enabled in the control plane and compute node too, you
can now get an end-to-end distributed trace of what happens when a new
connection is established, starting from the handshake with the
client, creating the 'start_compute' operation in the control plane,
starting the compute node, all the way to down to fetching the base
backup and the availability checks in compute_ctl.
Co-authored-by: Dmitry Ivanov <dima@neon.tech>
Fixes#3468.
This does change how the panics look, and most importantly, make sure
they are not interleaved with other messages. Adds a `GET /v1/panic`
endpoint for panic testing (useful for sentry dedup and this hook
testing).
The panics are now logged within a new error level span called `panic`
which separates it from other error level events. The panic info is
unpacked into span fields:
- thread=mgmt request worker
- location="pageserver/src/http/routes.rs:898:9"
Co-authored-by: Christian Schwarz <christian@neon.tech>
## Describe your changes
```
$ poetry add werkzeug@latest "moto[server]@latest"
Using version ^2.2.3 for werkzeug
Using version ^4.1.2 for moto
Updating dependencies
Resolving dependencies... (1.6s)
Writing lock file
Package operations: 0 installs, 2 updates, 1 removal
• Removing pytz (2022.1)
• Updating werkzeug (2.1.2 -> 2.2.3)
• Updating moto (3.1.18 -> 4.1.2)
```
Resolves:
- https://github.com/neondatabase/neon/security/dependabot/14
- https://github.com/neondatabase/neon/security/dependabot/13
`@dependabot` failed to create a PR for some reason (I guess because it
also needed to handle `moto` dependency)
## Issue ticket number and link
N/A
## Checklist before requesting a review
- [x] I have performed a self-review of my code.
- [x] If it is a core feature, I have added thorough tests.
- [x] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [x] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
It's not a property of the credentials that we receive from the
client, so remove it from ClientCredentials. Instead, pass it as an
argument directly to 'authenticate' function, where it's actually
used. All the rest of the changes is just plumbing to pass it through
the call stack to 'authenticate'
Repeatedly (twice) try to download the compaction targeted layers before actual
compaction. Adds tests for both L0 compaction downloading layers and image
creation downloading layers. Image creation support existed already.
Fixes#3591
Co-authored-by: Christian Schwarz <christian@neon.tech>
Refactor the tenant_size_model code. Segment now contains just the
minimum amount of information needed to calculate the size. Other
information that is useful for building up the segment tree, and for
display purposes, is now kept elsewhere. The code in 'main.rs' has a new
ScenarioBuilder struct for that.
Calculating which Segments are "needed" is now the responsibility of the
caller of tenant_size_mode, not part of the calculation itself. So it's
up to the caller to make all the decisions with retention periods for
each branch.
The output of the sizing calculation is now a Vec of SizeResults, rather
than a tree. It uses a tree representation internally, when doing the
calculation, but it's not exposed to the caller anymore.
Refactor the way the recursive calculation is performed.
Rewrite the code in size.rs that builds the Segment model. Get rid of
the intermediate representation with Update structs. Build the Segments
directly, with some local HashMaps and Vecs to track branch points to
help with that.
retention_period is now an input to gather_inputs(), rather than an
output.
Update pageserver http API: rename /size endpoint to /synthetic_size
with following parameters:
- /synthetic_size?inputs_only to get debug info;
- /synthetic_size?retention_period=0 to override cutoff that is used to
calculate the size;
pass header -H "Accept: text/html" to get HTML output, otherwise JSON is
returned
Update python tests and openapi spec.
---------
Co-authored-by: Anastasia Lubennikova <anastasia@neon.tech>
Co-authored-by: Joonas Koivunen <joonas@neon.tech>
## Describe your changes
Updates PITR and GC_PERIOD default value doc
## Issue ticket number and link
## Checklist before requesting a review
- [ ] I have performed a self-review of my code.
- [ ] If it is a core feature, I have added thorough tests.
- [ ] Do we need to implement analytics? if so did you add the relevant
metrics to the dashboard?
- [ ] If this PR requires public announcement, mark it with
/release-notes label and add several sentences in this section.
Clients may specify endpoint/project name via `options=project=...`,
so we should not only remove `project=` from `options` but also
drop `options` entirely, because connection pools don't support it.
Discussion: https://neondb.slack.com/archives/C033A2WE6BZ/p1676464382670119
a size of a *database* cannot be a sum of the sizes of *all databases*
indicating that a logical size is calculated for a branch
## Describe your changes
## Issue ticket number and link
## Checklist before requesting a review
- [x] i checked the suggested changes
- [x] this is not a core feature
- [x] this is just a docs update, does not require analytics
- [x] this PR does not require a public announcement
Upstream proxy erroneously stores user & dbname in compute node info
cache entries, thus causing "funny" connection problems if such an entry
is reused while connecting to e.g. a different DB on the same compute node.
This PR fixes the problem but doesn't eliminate the root cause just yet.
I'll revisit this code and make it more type-safe in the upcoming PR.
Alternative to #3586.
Introduces usage of current_logical_size.current_size as a boundary after which we start to update the metric gauge on ingested wal. Previously any incremented value (ingested wal) would had updated the gauge, but this would had left the metric at zero for timelines which never receive any wal even if size had been calculated. Now the gauge is updated right away as the calculation completes, not requiring any wal to be received.
This PR replaces the ill-advised `unsafe Sync` impl with a de-facto
standard way to solve the underlying problem.
TLDR:
- tokio::task::spawn requires future to be Send
- ∀t. (t : Sync) <=> (&t : Send)
- ∀t. (t : Send + !Sync) => (&t : !Send)
Without this patch, basebackup fails if we evict all layers before that.
This slipped in as part of
commit 01b4b0c2f3
Author: Christian Schwarz <christian@neon.tech>
Date: Fri Jan 13 17:02:22 2023 +0100
Introduce RequestContext
This patch adds a per-timeline periodic task that executes an eviction
policy. The eviction policy is configurable per tenant.
Two policies exist:
- NoEviction (the default one)
- LayerAccessThreshold
The LayerAccessThreshold policy examines the last access timestamp per
layer in the layer map and evicts the layer if that last access is
further in the past than a configurable threshold value.
This policy kind is evaluated periodically at a configurable period.
It logs a summary statistic at `info!()` or `warn!()` level, depending
on whether any evictions failed.
This feature has no explicit killswitch since it's off by default.
#3536 added the custom Debug implementations but it using derived Debug
on Key lead to too verbose output. Instead of making `Key`'s `Debug`
unconditionally or conditionally do the `Display` variant (for table
space'd keys), opted to build a newtype to provide `Debug` for
`Range<Key>` via `Display` which seemed to work unconditionally.
Also orders Key to have: 1. comment, 2. derive, 3. `struct Key`.
This script can be used to remove tenant directories on safekeepers for
projects which do not longer exist (deleted in the console).
To run this script you need to upload it to safekeeper (i.e. with SSH),
and run it with python3. Ansible can be used to run this script on
multiple safekeepers.
Fixes https://github.com/neondatabase/cloud/issues/3356
The auto-eviction PR (#3552) operates in two phaes:
1. find candidate layers
2. evict them.
For (2), a batch API like the one added in this commit is useful.
Note that this PR requires #3558 to be merged first.
Otherwise, the tests won't pass.
This changes the way we compare `Arc<dyn PersistentLayer>` in Timeline's
`LayerMap` not to use `Arc::ptr_eq` which has been witnessed in
development of #3557 to yield wrong results. It gives wrong results
because it compares fat pointers, which are `(object, vtable)` tuples
for `dyn Trait` and there are no guarantees that the `vtable`s are
unique. As in there were multiple vtables for `RemoteLayer` which is why
the comparison failed in #3557.
This is a known issue in rust, clippy warns against it and rust std
might be moving to the solution which has been reproduced on this PR:
compare only object pointers by "casting out" the vtable pointer.
Follow-up to #3536, to actually use the new `Debug` in replacing the
layers, and use replacement with manual eviction endpoint.
Turns out the two paths share a lot of handling of `Replacement` but
didn't unify the two (need 3). There are also upcoming refactorings
from other PRs to this.
2023-02-07 11:08:55 +02:00
697 changed files with 112554 additions and 36980 deletions
**NB: this PR must be merged only by 'Create a merge commit'!**
### Checklist when preparing for release
- [ ] Read or refresh [the release flow guide](https://github.com/neondatabase/cloud/wiki/Release:-general-flow)
- [ ] Read or refresh [the release flow guide](https://www.notion.so/neondatabase/Release-general-flow-61f2e39fd45d4d14a70c7749604bd70b)
- [ ] Ask in the [cloud Slack channel](https://neondb.slack.com/archives/C033A2WE6BZ) that you are going to rollout the release. Any blockers?
- [ ] Does this release contain any db migrations? Destructive ones? What is the rollback plan?
<!-- List everything that should be done**before** release, any issues / setting changes / etc -->
### Checklist after release
- [ ] Make sure instructions from PRs included in this release and labeled `manual_release_instructions` are executed (either by you or by people who wrote them).
- [ ] Based on the merged commits write release notes and open a PR into `website` repo ([example](https://github.com/neondatabase/website/pull/219/files))
# The path includes a test name (test_create_snapshot) and directory that the test creates (compatibility_snapshot_pg14), keep the path in sync with the test
Howdy! Usual good software engineering practices apply. Write
tests. Write comments. Follow standard Rust coding practices where
possible. Use 'cargo fmt' and 'clippy' to tidy up formatting.
possible. Use `cargo fmt` and `cargo clippy` to tidy up formatting.
There are soft spots in the code, which could use cleanup,
refactoring, additional comments, and so forth. Let's try to raise the
bar, and clean things up as we go. Try to leave code in a better shape
than it was before.
## Pre-commit hook
We have a sample pre-commit hook in `pre-commit.py`.
To set it up, run:
```bash
ln -s ../../pre-commit.py .git/hooks/pre-commit
```
This will run following checks on staged files before each commit:
-`rustfmt`
- checks for python files, see [obligatory checks](/docs/sourcetree.md#obligatory-checks).
There is also a separate script `./run_clippy.sh` that runs `cargo clippy` on the whole project
and `./scripts/reformat` that runs all formatting tools to ensure the project is up to date.
If you want to skip the hook, run `git commit` with `--no-verify` option.
## Submitting changes
1. Get at least one +1 on your PR before you push.
@@ -27,3 +45,28 @@ your patch's fault. Help to fix the root cause if something else has
broken the CI, before pushing.
*Happy Hacking!*
# How to run a CI pipeline on Pull Requests from external contributors
_An instruction for maintainers_
## TL;DR:
- Review the PR
- If and only if it looks **safe** (i.e. it doesn't contain any malicious code which could expose secrets or harm the CI), then:
- Press the "Approve and run" button in GitHub UI
- Add the `approved-for-ci-run` label to the PR
Repeat all steps after any change to the PR.
- When the changes are ready to get merged — merge the original PR (not the internal one)
## Longer version:
GitHub Actions triggered by the `pull_request` event don't share repository secrets with the forks (for security reasons).
So, passing the CI pipeline on Pull Requests from external contributors is impossible.
We're using the following approach to make it work:
- After the review, assign the `approved-for-ci-run` label to the PR if changes look safe
- A GitHub Action will create an internal branch and a new PR with the same changes (for example, for a PR `#1234`, it'll be a branch `ci-run/pr-1234`)
- Because the PR is created from the internal branch, it is able to access repository secrets (that's why it's crucial to make sure that the PR doesn't contain any malicious code that could expose our secrets or intentionally harm the CI)
- The label gets removed automatically, so to run CI again with new changes, the label should be added again (after the review)
For details see [`approved-for-ci-run.yml`](.github/workflows/approved-for-ci-run.yml)
Neon is a serverless open-source alternative to AWS Aurora Postgres. It separates storage and compute and substitutes the PostgreSQL storage layer by redistributing data across a cluster of nodes.
@@ -15,7 +17,7 @@ The Neon storage engine consists of two major components:
- Pageserver. Scalable storage backend for the compute nodes.
- Safekeepers. The safekeepers form a redundant WAL service that received WAL from the compute node, and stores it durably until it has been processed by the pageserver and uploaded to cloud storage.
See developer documentation in [/docs/SUMMARY.md](/docs/SUMMARY.md) for more information.
See developer documentation in [SUMMARY.md](/docs/SUMMARY.md) for more information.
## Running local installation
@@ -26,14 +28,23 @@ See developer documentation in [/docs/SUMMARY.md](/docs/SUMMARY.md) for more inf
* On Ubuntu or Debian, this set of packages should be sufficient to build the code:
Building Neon requires 3.15+ version of `protoc` (protobuf-compiler). If your distribution provides an older version, you can install a newer version from [here](https://github.com/protocolbuffers/protobuf/releases).
// We're just a test helper: no graceful shutdown.
std::process::exit(0);
}
})?;
Ok(())
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
