fix: remove initdb image layer optimization

the oldest commit I checked not to have a working initdb
image layer optimization was 4b25b9652a
more a year ago. it is safe to say we have been doing fine without it.

.cargo/config.toml

@@ -0,0 +1,22 @@
+# The binaries are really slow, if you compile them in 'dev' mode with the defaults.
+# Enable some optimizations even in 'dev' mode, to make tests faster. The basic
+# optimizations enabled by "opt-level=1" don't affect debuggability too much.
+#
+# See https://www.reddit.com/r/rust/comments/gvrgca/this_is_a_neat_trick_for_getting_good_runtime/
+#
+[profile.dev.package."*"]
+# Set the default for dependencies in Development mode.
+opt-level = 3
+
+[profile.dev]
+# Turn on a small amount of optimization in Development mode.
+opt-level = 1
+
+[build]
+# This is only present for local builds, as it will be overridden
+# by the RUSTDOCFLAGS env var in CI.
+rustdocflags = ["-Arustdoc::private_intra_doc_links"]
+
+[alias]
+build_testing = ["build", "--features", "testing"]
+neon = ["run", "--bin", "neon_local"]

.config/hakari.toml

@@ -0,0 +1,32 @@
+# This file contains settings for `cargo hakari`.
+# See https://docs.rs/cargo-hakari/latest/cargo_hakari/config for a full list of options.
+
+hakari-package = "workspace_hack"
+
+# Format for `workspace-hack = ...` lines in other Cargo.tomls. Requires cargo-hakari 0.9.8 or above.
+dep-format-version = "4"
+
+# Setting workspace.resolver = "2" in the root Cargo.toml is HIGHLY recommended.
+# Hakari works much better with the new feature resolver.
+# For more about the new feature resolver, see:
+# https://blog.rust-lang.org/2021/03/25/Rust-1.51.0.html#cargos-new-feature-resolver
+# Have to keep the resolver still here since hakari requires this field,
+# despite it's now the default for 2021 edition & cargo.
+resolver = "2"
+
+# Add triples corresponding to platforms commonly used by developers here.
+# https://doc.rust-lang.org/rustc/platform-support.html
+platforms = [
+    # "x86_64-unknown-linux-gnu",
+    # "x86_64-apple-darwin",
+    # "x86_64-pc-windows-msvc",
+]
+
+[final-excludes]
+# vm_monitor benefits from the same Cargo.lock as the rest of our artifacts, but
+# it is built primarly in separate repo neondatabase/autoscaling and thus is excluded
+# from depending on workspace-hack because most of the dependencies are not used.
+workspace-members = ["vm_monitor"]
+
+# Write out exact versions rather than a semver range. (Defaults to false.)
+# exact-versions = true

.dockerignore

@@ -0,0 +1,27 @@
+*
+
+!rust-toolchain.toml
+!Cargo.toml
+!Cargo.lock
+!Makefile
+
+!.cargo/
+!.config/
+!control_plane/
+!compute_tools/
+!libs/
+!pageserver/
+!pgxn/
+!proxy/
+!safekeeper/
+!s3_scrubber/
+!storage_broker/
+!trace/
+!vendor/postgres-v14/
+!vendor/postgres-v15/
+!vendor/postgres-v16/
+!workspace_hack/
+!neon_local/
+!scripts/ninstall.sh
+!scripts/combine_control_files.py
+!vm-cgconfig.conf

.git-blame-ignore-revs

@@ -0,0 +1 @@
+4c2bb43775947775401cbb9d774823c5723a91f8

.github/ISSUE_TEMPLATE/bug-template.md

@@ -0,0 +1,23 @@
+---
+name: Bug Template
+about: Used for describing bugs
+title: ''
+labels: t/bug
+assignees: ''
+
+---
+
+## Steps to reproduce
+
+
+## Expected result
+
+
+## Actual result
+
+
+## Environment
+
+
+## Logs, links
+- 

.github/ISSUE_TEMPLATE/epic-template.md

@@ -0,0 +1,26 @@
+---
+name: Epic Template
+about: A set of related tasks contributing towards specific outcome, comprising of
+  more than 1 week of work.
+title: 'Epic: '
+labels: t/Epic
+assignees: ''
+
+---
+
+## Motivation
+
+
+## DoD
+
+
+## Implementation ideas
+
+
+```[tasklist]
+### Tasks
+```
+
+
+## Other related tasks and Epics
+- 

.github/PULL_REQUEST_TEMPLATE/release-pr.md

@@ -0,0 +1,21 @@
+## Release 202Y-MM-DD
+
+**NB: this PR must be merged only by 'Create a merge commit'!**
+
+### Checklist when preparing for release
+- [ ] Read or refresh [the release flow guide](https://github.com/neondatabase/cloud/wiki/Release:-general-flow)
+- [ ] Ask in the [cloud Slack channel](https://neondb.slack.com/archives/C033A2WE6BZ) that you are going to rollout the release. Any blockers?
+- [ ] Does this release contain any db migrations? Destructive ones? What is the rollback plan?
+
+<!-- List everything that should be done **before** release, any issues / setting changes / etc -->
+
+### Checklist after release
+- [ ] Make sure instructions from PRs included in this release and labeled `manual_release_instructions` are executed (either by you or by people who wrote them).
+- [ ] Based on the merged commits write release notes and open a PR into `website` repo ([example](https://github.com/neondatabase/website/pull/219/files))
+- [ ] Check [#dev-production-stream](https://neondb.slack.com/archives/C03F5SM1N02) Slack channel
+- [ ] Check [stuck projects page](https://console.neon.tech/admin/projects?sort=last_active&order=desc&stuck=true)
+- [ ] Check [recent operation failures](https://console.neon.tech/admin/operations?action=create_timeline%2Cstart_compute%2Cstop_compute%2Csuspend_compute%2Capply_config%2Cdelete_timeline%2Cdelete_tenant%2Ccreate_branch%2Ccheck_availability&sort=updated_at&order=desc&had_retries=some)
+- [ ] Check [cloud SLO dashboard](https://neonprod.grafana.net/d/_oWcBMJ7k/cloud-slos?orgId=1)
+- [ ] Check [compute startup metrics dashboard](https://neonprod.grafana.net/d/5OkYJEmVz/compute-startup-time)
+
+<!-- List everything that should be done **after** release, any admin UI configuration / Grafana dashboard / alert changes / setting changes / etc -->

.github/actionlint.yml

@@ -0,0 +1,10 @@
+self-hosted-runner:
+  labels:
+    - gen3
+    - large
+    - small
+    - us-east-2
+config-variables:
+  - REMOTE_STORAGE_AZURE_CONTAINER
+  - REMOTE_STORAGE_AZURE_REGION
+  - SLACK_UPCOMING_RELEASE_CHANNEL_ID

.github/actions/allure-report-generate/action.yml

@@ -0,0 +1,245 @@
+name: 'Create Allure report'
+description: 'Generate Allure report from uploaded by actions/allure-report-store tests results'
+
+inputs:
+  store-test-results-into-db:
+    description: 'Whether to store test results into the database. TEST_RESULT_CONNSTR/TEST_RESULT_CONNSTR_NEW should be set'
+    type: boolean
+    required: false
+    default: false
+
+outputs:
+  base-url:
+    description: 'Base URL for Allure report'
+    value: ${{ steps.generate-report.outputs.base-url }}
+  base-s3-url:
+    description: 'Base S3 URL for Allure report'
+    value: ${{ steps.generate-report.outputs.base-s3-url }}
+  report-url:
+    description: 'Allure report URL'
+    value: ${{ steps.generate-report.outputs.report-url }}
+  report-json-url:
+    description: 'Allure report JSON URL'
+    value: ${{ steps.generate-report.outputs.report-json-url }}
+
+runs:
+  using: "composite"
+
+  steps:
+    # We're using some of env variables quite offen, so let's set them once.
+    #
+    # It would be nice to have them set in common runs.env[0] section, but it doesn't work[1]
+    #
+    # - [0] https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runsenv
+    # - [1] https://github.com/neondatabase/neon/pull/3907#discussion_r1154703456
+    #
+    - name: Set variables
+      shell: bash -euxo pipefail {0}
+      run: |
+        PR_NUMBER=$(jq --raw-output .pull_request.number "$GITHUB_EVENT_PATH" || true)
+        if [ "${PR_NUMBER}" != "null" ]; then
+          BRANCH_OR_PR=pr-${PR_NUMBER}
+        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ]; then
+          # Shortcut for special branches
+          BRANCH_OR_PR=${GITHUB_REF_NAME}
+        else
+          BRANCH_OR_PR=branch-$(printf "${GITHUB_REF_NAME}" | tr -c "[:alnum:]._-" "-")
+        fi
+
+        LOCK_FILE=reports/${BRANCH_OR_PR}/lock.txt
+
+        WORKDIR=/tmp/${BRANCH_OR_PR}-$(date +%s)
+        mkdir -p ${WORKDIR}
+
+        echo "BRANCH_OR_PR=${BRANCH_OR_PR}" >> $GITHUB_ENV
+        echo "LOCK_FILE=${LOCK_FILE}"       >> $GITHUB_ENV
+        echo "WORKDIR=${WORKDIR}"           >> $GITHUB_ENV
+        echo "BUCKET=${BUCKET}"             >> $GITHUB_ENV
+      env:
+        BUCKET: neon-github-public-dev
+
+    # TODO: We can replace with a special docker image with Java and Allure pre-installed
+    - uses: actions/setup-java@v3
+      with:
+        distribution: 'temurin'
+        java-version: '17'
+
+    - name: Install Allure
+      shell: bash -euxo pipefail {0}
+      run: |
+        if ! which allure; then
+          ALLURE_ZIP=allure-${ALLURE_VERSION}.zip
+          wget -q https://github.com/allure-framework/allure2/releases/download/${ALLURE_VERSION}/${ALLURE_ZIP}
+          echo "${ALLURE_ZIP_SHA256} ${ALLURE_ZIP}" | sha256sum --check
+          unzip -q ${ALLURE_ZIP}
+          echo "$(pwd)/allure-${ALLURE_VERSION}/bin" >> $GITHUB_PATH
+          rm -f ${ALLURE_ZIP}
+        fi
+      env:
+        ALLURE_VERSION: 2.24.0
+        ALLURE_ZIP_SHA256: 60b1d6ce65d9ef24b23cf9c2c19fd736a123487c38e54759f1ed1a7a77353c90
+
+    # Potentially we could have several running build for the same key (for example, for the main branch), so we use improvised lock for this
+    - name: Acquire lock
+      shell: bash -euxo pipefail {0}
+      run: |
+        LOCK_TIMEOUT=300 # seconds
+
+        LOCK_CONTENT="${GITHUB_RUN_ID}-${GITHUB_RUN_ATTEMPT}"
+        echo ${LOCK_CONTENT} > ${WORKDIR}/lock.txt
+
+        # Do it up to 5 times to avoid race condition
+        for _ in $(seq 1 5); do
+          for i in $(seq 1 ${LOCK_TIMEOUT}); do
+            LOCK_ACQUIRED=$(aws s3api head-object --bucket neon-github-public-dev --key ${LOCK_FILE} | jq --raw-output '.LastModified' || true)
+            # `date --date="..."` is supported only by gnu date (i.e. it doesn't work on BSD/macOS)
+            if [ -z "${LOCK_ACQUIRED}" ] || [ "$(( $(date +%s) - $(date --date="${LOCK_ACQUIRED}" +%s) ))" -gt "${LOCK_TIMEOUT}" ]; then
+              break
+            fi
+            sleep 1
+          done
+
+          aws s3 mv --only-show-errors ${WORKDIR}/lock.txt "s3://${BUCKET}/${LOCK_FILE}"
+
+          # Double-check that exactly THIS run has acquired the lock
+          aws s3 cp --only-show-errors "s3://${BUCKET}/${LOCK_FILE}" ./lock.txt
+          if [ "$(cat lock.txt)" = "${LOCK_CONTENT}" ]; then
+            break
+          fi
+        done
+
+    - name: Generate and publish final Allure report
+      id: generate-report
+      shell: bash -euxo pipefail {0}
+      run: |
+        REPORT_PREFIX=reports/${BRANCH_OR_PR}
+        RAW_PREFIX=reports-raw/${BRANCH_OR_PR}/${GITHUB_RUN_ID}
+
+        BASE_URL=https://${BUCKET}.s3.amazonaws.com/${REPORT_PREFIX}/${GITHUB_RUN_ID}
+        BASE_S3_URL=s3://${BUCKET}/${REPORT_PREFIX}/${GITHUB_RUN_ID}
+        REPORT_URL=${BASE_URL}/index.html
+        REPORT_JSON_URL=${BASE_URL}/data/suites.json
+
+        # Get previously uploaded data for this run
+        ZSTD_NBTHREADS=0
+
+        S3_FILEPATHS=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${RAW_PREFIX}/ | jq --raw-output '.Contents[]?.Key')
+        if [ -z "$S3_FILEPATHS" ]; then
+          # There's no previously uploaded data for this $GITHUB_RUN_ID
+          exit 0
+        fi
+
+        time aws s3 cp --recursive --only-show-errors "s3://${BUCKET}/${RAW_PREFIX}/" "${WORKDIR}/"
+        for archive in $(find ${WORKDIR} -name "*.tar.zst"); do
+          mkdir -p ${archive%.tar.zst}
+          time tar -xf ${archive} -C ${archive%.tar.zst}
+          rm -f ${archive}
+        done
+
+        # Get history trend
+        time aws s3 cp --recursive --only-show-errors "s3://${BUCKET}/${REPORT_PREFIX}/latest/history" "${WORKDIR}/latest/history" || true
+
+        # Generate report
+        time allure generate --clean --output ${WORKDIR}/report ${WORKDIR}/*
+
+        # Replace a logo link with a redirect to the latest version of the report
+        sed -i 's|<a href="." class=|<a href="https://'${BUCKET}'.s3.amazonaws.com/'${REPORT_PREFIX}'/latest/index.html?nocache='"'+Date.now()+'"'" class=|g' ${WORKDIR}/report/app.js
+
+        # Upload a history and the final report (in this particular order to not to have duplicated history in 2 places)
+        time aws s3 mv --recursive --only-show-errors "${WORKDIR}/report/history" "s3://${BUCKET}/${REPORT_PREFIX}/latest/history"
+
+        # Use aws s3 cp (instead of aws s3 sync) to keep files from previous runs to make old URLs work,
+        # and to keep files on the host to upload them to the database
+        time aws s3 cp --recursive --only-show-errors "${WORKDIR}/report" "s3://${BUCKET}/${REPORT_PREFIX}/${GITHUB_RUN_ID}"
+
+        # Generate redirect
+        cat <<EOF > ${WORKDIR}/index.html
+          <!DOCTYPE html>
+
+          <meta charset="utf-8">
+          <title>Redirecting to ${REPORT_URL}</title>
+          <meta http-equiv="refresh" content="0; URL=${REPORT_URL}">
+        EOF
+        time aws s3 cp --only-show-errors ${WORKDIR}/index.html "s3://${BUCKET}/${REPORT_PREFIX}/latest/index.html"
+
+        echo "base-url=${BASE_URL}"               >> $GITHUB_OUTPUT
+        echo "base-s3-url=${BASE_S3_URL}"         >> $GITHUB_OUTPUT
+        echo "report-url=${REPORT_URL}"           >> $GITHUB_OUTPUT
+        echo "report-json-url=${REPORT_JSON_URL}" >> $GITHUB_OUTPUT
+
+        echo "[Allure Report](${REPORT_URL})" >> ${GITHUB_STEP_SUMMARY}
+
+    - name: Release lock
+      if: always()
+      shell: bash -euxo pipefail {0}
+      run: |
+        aws s3 cp --only-show-errors "s3://${BUCKET}/${LOCK_FILE}" ./lock.txt || exit 0
+
+        if [ "$(cat lock.txt)" = "${GITHUB_RUN_ID}-${GITHUB_RUN_ATTEMPT}" ]; then
+          aws s3 rm "s3://${BUCKET}/${LOCK_FILE}"
+        fi
+
+    - name: Store Allure test stat in the DB
+      if: ${{ !cancelled() && inputs.store-test-results-into-db == 'true' }}
+      shell: bash -euxo pipefail {0}
+      env:
+        COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
+        REPORT_JSON_URL: ${{ steps.generate-report.outputs.report-json-url }}
+      run: |
+        export DATABASE_URL=${REGRESS_TEST_RESULT_CONNSTR}
+
+        ./scripts/pysync
+
+        poetry run python3 scripts/ingest_regress_test_result.py \
+          --revision ${COMMIT_SHA} \
+          --reference ${GITHUB_REF} \
+          --build-type unified \
+          --ingest ${WORKDIR}/report/data/suites.json
+
+    - name: Store Allure test stat in the DB (new)
+      if: ${{ !cancelled() && inputs.store-test-results-into-db == 'true' }}
+      shell: bash -euxo pipefail {0}
+      env:
+        COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
+        BASE_S3_URL: ${{ steps.generate-report.outputs.base-s3-url }}
+      run: |
+        if [ ! -d "${WORKDIR}/report/data/test-cases" ]; then
+          exit 0
+        fi
+
+        export DATABASE_URL=${REGRESS_TEST_RESULT_CONNSTR_NEW}
+
+        ./scripts/pysync
+
+        poetry run python3 scripts/ingest_regress_test_result-new-format.py \
+          --reference ${GITHUB_REF} \
+          --revision ${COMMIT_SHA} \
+          --run-id ${GITHUB_RUN_ID} \
+          --run-attempt ${GITHUB_RUN_ATTEMPT} \
+          --test-cases-dir ${WORKDIR}/report/data/test-cases
+
+    - name: Cleanup
+      if: always()
+      shell: bash -euxo pipefail {0}
+      run: |
+        if [ -d "${WORKDIR}" ]; then
+          rm -rf ${WORKDIR}
+        fi
+
+    - uses: actions/github-script@v6
+      if: always()
+      env:
+        REPORT_URL: ${{ steps.generate-report.outputs.report-url }}
+        COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
+      with:
+        script: |
+          const { REPORT_URL, COMMIT_SHA } = process.env
+
+          await github.rest.repos.createCommitStatus({
+            owner: context.repo.owner,
+            repo: context.repo.repo,
+            sha: `${COMMIT_SHA}`,
+            state: 'success',
+            target_url: `${REPORT_URL}`,
+            context: 'Allure report',
+          })

.github/actions/allure-report-store/action.yml

@@ -0,0 +1,72 @@
+name: 'Store Allure results'
+description: 'Upload test results to be used by actions/allure-report-generate'
+
+inputs:
+  report-dir:
+    description: 'directory with test results generated by tests'
+    required: true
+  unique-key:
+    description: 'string to distinguish different results in the same run'
+    required: true
+
+runs:
+  using: "composite"
+
+  steps:
+    - name: Set variables
+      shell: bash -euxo pipefail {0}
+      run: |
+        PR_NUMBER=$(jq --raw-output .pull_request.number "$GITHUB_EVENT_PATH" || true)
+        if [ "${PR_NUMBER}" != "null" ]; then
+          BRANCH_OR_PR=pr-${PR_NUMBER}
+        elif [ "${GITHUB_REF_NAME}" = "main" ] || [ "${GITHUB_REF_NAME}" = "release" ]; then
+          # Shortcut for special branches
+          BRANCH_OR_PR=${GITHUB_REF_NAME}
+        else
+          BRANCH_OR_PR=branch-$(printf "${GITHUB_REF_NAME}" | tr -c "[:alnum:]._-" "-")
+        fi
+
+        echo "BRANCH_OR_PR=${BRANCH_OR_PR}" >> $GITHUB_ENV
+        echo "REPORT_DIR=${REPORT_DIR}"     >> $GITHUB_ENV
+      env:
+        REPORT_DIR: ${{ inputs.report-dir }}
+
+    - name: Upload test results
+      shell: bash -euxo pipefail {0}
+      run: |
+        REPORT_PREFIX=reports/${BRANCH_OR_PR}
+        RAW_PREFIX=reports-raw/${BRANCH_OR_PR}/${GITHUB_RUN_ID}
+
+        # Add metadata
+        cat <<EOF > ${REPORT_DIR}/executor.json
+          {
+            "name": "GitHub Actions",
+            "type": "github",
+            "url": "https://${BUCKET}.s3.amazonaws.com/${REPORT_PREFIX}/latest/index.html",
+            "buildOrder": ${GITHUB_RUN_ID},
+            "buildName": "GitHub Actions Run #${GITHUB_RUN_NUMBER}/${GITHUB_RUN_ATTEMPT}",
+            "buildUrl": "${GITHUB_SERVER_URL}/${GITHUB_REPOSITORY}/actions/runs/${GITHUB_RUN_ID}/attempts/${GITHUB_RUN_ATTEMPT}",
+            "reportUrl": "https://${BUCKET}.s3.amazonaws.com/${REPORT_PREFIX}/${GITHUB_RUN_ID}/index.html",
+            "reportName": "Allure Report"
+          }
+        EOF
+
+        cat <<EOF > ${REPORT_DIR}/environment.properties
+          COMMIT_SHA=${COMMIT_SHA}
+        EOF
+
+        ARCHIVE="${UNIQUE_KEY}-${GITHUB_RUN_ATTEMPT}-$(date +%s).tar.zst"
+        ZSTD_NBTHREADS=0
+
+        time tar -C ${REPORT_DIR} -cf ${ARCHIVE} --zstd .
+        time aws s3 mv --only-show-errors ${ARCHIVE} "s3://${BUCKET}/${RAW_PREFIX}/${ARCHIVE}"
+      env:
+        UNIQUE_KEY: ${{ inputs.unique-key }}
+        COMMIT_SHA: ${{ github.event.pull_request.head.sha || github.sha }}
+        BUCKET: neon-github-public-dev
+
+    - name: Cleanup
+      if: always()
+      shell: bash -euxo pipefail {0}
+      run: |
+        rm -rf ${REPORT_DIR}

.github/actions/download/action.yml

@@ -0,0 +1,59 @@
+name: "Download an artifact"
+description: "Custom download action"
+inputs:
+  name:
+    description: "Artifact name"
+    required: true
+  path:
+    description: "A directory to put artifact into"
+    default: "."
+    required: false
+  skip-if-does-not-exist:
+    description: "Allow to skip if file doesn't exist, fail otherwise"
+    default: false
+    required: false
+  prefix:
+    description: "S3 prefix. Default is '${GITHUB_RUN_ID}/${GITHUB_RUN_ATTEMPT}'"
+    required: false
+
+runs:
+  using: "composite"
+  steps:
+    - name: Download artifact
+      id: download-artifact
+      shell: bash -euxo pipefail {0}
+      env:
+        TARGET: ${{ inputs.path }}
+        ARCHIVE: /tmp/downloads/${{ inputs.name }}.tar.zst
+        SKIP_IF_DOES_NOT_EXIST: ${{ inputs.skip-if-does-not-exist }}
+        PREFIX: artifacts/${{ inputs.prefix || format('{0}/{1}', github.run_id, github.run_attempt) }}
+      run: |
+        BUCKET=neon-github-public-dev
+        FILENAME=$(basename $ARCHIVE)
+
+        S3_KEY=$(aws s3api list-objects-v2 --bucket ${BUCKET} --prefix ${PREFIX%$GITHUB_RUN_ATTEMPT} | jq -r '.Contents[]?.Key' | grep ${FILENAME} | sort --version-sort | tail -1 || true)
+        if [ -z "${S3_KEY}" ]; then
+          if [ "${SKIP_IF_DOES_NOT_EXIST}" = "true" ]; then
+            echo 'SKIPPED=true' >> $GITHUB_OUTPUT
+            exit 0
+          else
+            echo >&2 "Neither s3://${BUCKET}/${PREFIX}/${FILENAME} nor its version from previous attempts exist"
+            exit 1
+          fi
+        fi
+
+        echo 'SKIPPED=false' >> $GITHUB_OUTPUT
+
+        mkdir -p $(dirname $ARCHIVE)
+        time aws s3 cp --only-show-errors s3://${BUCKET}/${S3_KEY} ${ARCHIVE}
+
+    - name: Extract artifact
+      if: ${{ steps.download-artifact.outputs.SKIPPED == 'false' }}
+      shell: bash -euxo pipefail {0}
+      env:
+        TARGET: ${{ inputs.path }}
+        ARCHIVE: /tmp/downloads/${{ inputs.name }}.tar.zst
+      run: |
+        mkdir -p ${TARGET}
+        time tar -xf ${ARCHIVE} -C ${TARGET}
+        rm -f ${ARCHIVE}

.github/actions/neon-branch-create/action.yml

@@ -0,0 +1,138 @@
+name: 'Create Branch'
+description: 'Create Branch using API'
+
+inputs:
+  api_key:
+    desctiption: 'Neon API key'
+    required: true
+  project_id:
+    desctiption: 'ID of the Project to create Branch in'
+    required: true
+  api_host:
+    desctiption: 'Neon API host'
+    default: console.stage.neon.tech
+outputs:
+  dsn:
+    description: 'Created Branch DSN (for main database)'
+    value: ${{ steps.change-password.outputs.dsn }}
+  branch_id:
+    description: 'Created Branch ID'
+    value: ${{ steps.create-branch.outputs.branch_id }}
+
+runs:
+  using: "composite"
+  steps:
+    - name: Create New Branch
+      id: create-branch
+      shell: bash -euxo pipefail {0}
+      run: |
+        for i in $(seq 1 10); do
+         branch=$(curl \
+            "https://${API_HOST}/api/v2/projects/${PROJECT_ID}/branches" \
+            --header "Accept: application/json" \
+            --header "Content-Type: application/json" \
+            --header "Authorization: Bearer ${API_KEY}" \
+            --data "{
+              \"branch\": {
+                \"name\": \"Created by actions/neon-branch-create; GITHUB_RUN_ID=${GITHUB_RUN_ID} at $(date +%s)\"
+              },
+              \"endpoints\": [
+                {
+                  \"type\": \"read_write\"
+                }
+              ]
+            }")
+
+          if [ -z "${branch}" ]; then
+            sleep 1
+            continue
+          fi
+
+          branch_id=$(echo $branch | jq --raw-output '.branch.id')
+          if [ "${branch_id}" == "null" ]; then
+            sleep 1
+            continue
+          fi
+
+          break
+        done
+
+        if [ -z "${branch_id}" ] || [ "${branch_id}" == "null" ]; then
+          echo >&2 "Failed to create branch after 10 attempts, the latest response was: ${branch}"
+          exit 1
+        fi
+
+        branch_id=$(echo $branch | jq --raw-output '.branch.id')
+        echo "branch_id=${branch_id}" >> $GITHUB_OUTPUT
+
+        host=$(echo $branch | jq --raw-output '.endpoints[0].host')
+        echo "host=${host}" >> $GITHUB_OUTPUT
+      env:
+        API_HOST: ${{ inputs.api_host }}
+        API_KEY: ${{ inputs.api_key }}
+        PROJECT_ID: ${{ inputs.project_id }}
+
+    - name: Get Role name
+      id: role-name
+      shell: bash -euxo pipefail {0}
+      run: |
+        roles=$(curl \
+          "https://${API_HOST}/api/v2/projects/${PROJECT_ID}/branches/${BRANCH_ID}/roles" \
+          --fail \
+          --header "Accept: application/json" \
+          --header "Content-Type: application/json" \
+          --header "Authorization: Bearer ${API_KEY}"
+          )
+
+        role_name=$(echo $roles | jq --raw-output '.roles[] | select(.protected == false) | .name')
+        echo "role_name=${role_name}" >> $GITHUB_OUTPUT
+      env:
+        API_HOST: ${{ inputs.api_host }}
+        API_KEY: ${{ inputs.api_key }}
+        PROJECT_ID: ${{ inputs.project_id }}
+        BRANCH_ID: ${{ steps.create-branch.outputs.branch_id }}
+
+    - name: Change Password
+      id: change-password
+      # A shell without `set -x` to not to expose password/dsn in logs
+      shell: bash -euo pipefail {0}
+      run: |
+        for i in $(seq 1 10); do
+          reset_password=$(curl \
+            "https://${API_HOST}/api/v2/projects/${PROJECT_ID}/branches/${BRANCH_ID}/roles/${ROLE_NAME}/reset_password" \
+            --request POST \
+            --header "Accept: application/json" \
+            --header "Content-Type: application/json" \
+            --header "Authorization: Bearer ${API_KEY}"
+            )
+
+          if [ -z "${reset_password}" ]; then
+            sleep 1
+            continue
+          fi
+
+          password=$(echo $reset_password | jq --raw-output '.role.password')
+          if [ "${password}" == "null" ]; then
+            sleep 1
+            continue
+          fi
+
+          echo "::add-mask::${password}"
+          break
+        done
+
+        if [ -z "${password}" ] || [ "${password}" == "null" ]; then
+          echo >&2 "Failed to reset password after 10 attempts, the latest response was: ${reset_password}"
+          exit 1
+        fi
+
+        dsn="postgres://${ROLE_NAME}:${password}@${HOST}/neondb"
+        echo "::add-mask::${dsn}"
+        echo "dsn=${dsn}" >> $GITHUB_OUTPUT
+      env:
+        API_HOST: ${{ inputs.api_host }}
+        API_KEY: ${{ inputs.api_key }}
+        PROJECT_ID: ${{ inputs.project_id }}
+        BRANCH_ID: ${{ steps.create-branch.outputs.branch_id }}
+        ROLE_NAME: ${{ steps.role-name.outputs.role_name }}
+        HOST: ${{ steps.create-branch.outputs.host }}

.github/actions/neon-branch-delete/action.yml

@@ -0,0 +1,58 @@
+name: 'Delete Branch'
+description: 'Delete Branch using API'
+
+inputs:
+  api_key:
+    desctiption: 'Neon API key'
+    required: true
+  project_id:
+    desctiption: 'ID of the Project which should be deleted'
+    required: true
+  branch_id:
+    desctiption: 'ID of the branch to delete'
+    required: true
+  api_host:
+    desctiption: 'Neon API host'
+    default: console.stage.neon.tech
+
+runs:
+  using: "composite"
+  steps:
+    - name: Delete Branch
+      # Do not try to delete a branch if .github/actions/neon-project-create
+      # or .github/actions/neon-branch-create failed before
+      if: ${{ inputs.project_id != '' && inputs.branch_id != '' }}
+      shell: bash -euxo pipefail {0}
+      run: |
+        for i in $(seq 1 10); do
+          deleted_branch=$(curl \
+            "https://${API_HOST}/api/v2/projects/${PROJECT_ID}/branches/${BRANCH_ID}" \
+            --request DELETE \
+            --header "Accept: application/json" \
+            --header "Content-Type: application/json" \
+            --header "Authorization: Bearer ${API_KEY}"
+            )
+
+          if [ -z "${deleted_branch}" ]; then
+            sleep 1
+            continue
+          fi
+
+          branch_id=$(echo $deleted_branch | jq --raw-output '.branch.id')
+          if [ "${branch_id}" == "null" ]; then
+            sleep 1
+            continue
+          fi
+
+          break
+        done
+
+        if [ -z "${branch_id}" ] || [ "${branch_id}" == "null" ]; then
+          echo >&2 "Failed to delete branch after 10 attempts, the latest response was: ${deleted_branch}"
+          exit 1
+        fi
+      env:
+        API_HOST: ${{ inputs.api_host }}
+        API_KEY: ${{ inputs.api_key }}
+        PROJECT_ID: ${{ inputs.project_id }}
+        BRANCH_ID: ${{ inputs.branch_id }}

.github/actions/neon-project-create/action.yml

@@ -0,0 +1,80 @@
+name: 'Create Neon Project'
+description: 'Create Neon Project using API'
+
+inputs:
+  api_key:
+    desctiption: 'Neon API key'
+    required: true
+  region_id:
+    desctiption: 'Region ID, if not set the project will be created in the default region'
+    default: aws-us-east-2
+  postgres_version:
+    desctiption: 'Postgres version; default is 15'
+    default: 15
+  api_host:
+    desctiption: 'Neon API host'
+    default: console.stage.neon.tech
+  provisioner:
+    desctiption: 'k8s-pod or k8s-neonvm'
+    default: 'k8s-pod'
+  compute_units:
+    desctiption: '[Min, Max] compute units; Min and Max are used for k8s-neonvm with autoscaling, for k8s-pod values Min and Max should be equal'
+    default: '[1, 1]'
+
+outputs:
+  dsn:
+    description: 'Created Project DSN (for main database)'
+    value: ${{ steps.create-neon-project.outputs.dsn }}
+  project_id:
+    description: 'Created Project ID'
+    value: ${{ steps.create-neon-project.outputs.project_id }}
+
+runs:
+  using: "composite"
+  steps:
+    - name: Create Neon Project
+      id: create-neon-project
+      # A shell without `set -x` to not to expose password/dsn in logs
+      shell: bash -euo pipefail {0}
+      run: |
+        if [ "${PROVISIONER}" == "k8s-pod" ] && [ "${MIN_CU}" != "${MAX_CU}" ]; then
+          echo >&2 "For k8s-pod provisioner MIN_CU should be equal to MAX_CU"
+        fi
+
+        project=$(curl \
+          "https://${API_HOST}/api/v2/projects" \
+          --fail \
+          --header "Accept: application/json" \
+          --header "Content-Type: application/json" \
+          --header "Authorization: Bearer ${API_KEY}" \
+          --data "{
+            \"project\": {
+              \"name\": \"Created by actions/neon-project-create; GITHUB_RUN_ID=${GITHUB_RUN_ID}\",
+              \"pg_version\": ${POSTGRES_VERSION},
+              \"region_id\": \"${REGION_ID}\",
+              \"provisioner\": \"${PROVISIONER}\",
+              \"autoscaling_limit_min_cu\": ${MIN_CU},
+              \"autoscaling_limit_max_cu\": ${MAX_CU},
+              \"settings\": { }
+            }
+          }")
+
+        # Mask password
+        echo "::add-mask::$(echo $project | jq --raw-output '.roles[] | select(.name != "web_access") | .password')"
+
+        dsn=$(echo $project | jq --raw-output '.connection_uris[0].connection_uri')
+        echo "::add-mask::${dsn}"
+        echo "dsn=${dsn}" >> $GITHUB_OUTPUT
+
+        project_id=$(echo $project | jq --raw-output '.project.id')
+        echo "project_id=${project_id}" >> $GITHUB_OUTPUT
+
+        echo "Project ${project_id} has been created"
+      env:
+        API_HOST: ${{ inputs.api_host }}
+        API_KEY: ${{ inputs.api_key }}
+        REGION_ID: ${{ inputs.region_id }}
+        POSTGRES_VERSION: ${{ inputs.postgres_version }}
+        PROVISIONER: ${{ inputs.provisioner }}
+        MIN_CU: ${{ fromJSON(inputs.compute_units)[0] }}
+        MAX_CU: ${{ fromJSON(inputs.compute_units)[1] }}

.github/actions/neon-project-delete/action.yml

@@ -0,0 +1,35 @@
+name: 'Delete Neon Project'
+description: 'Delete Neon Project using API'
+
+inputs:
+  api_key:
+    desctiption: 'Neon API key'
+    required: true
+  project_id:
+    desctiption: 'ID of the Project to delete'
+    required: true
+  api_host:
+    desctiption: 'Neon API host'
+    default: console.stage.neon.tech
+
+runs:
+  using: "composite"
+  steps:
+    - name: Delete Neon Project
+      # Do not try to delete a project if .github/actions/neon-project-create failed before
+      if: ${{ inputs.project_id != '' }}
+      shell: bash -euxo pipefail {0}
+      run: |
+        curl \
+          "https://${API_HOST}/api/v2/projects/${PROJECT_ID}" \
+          --fail \
+          --request DELETE \
+          --header "Accept: application/json" \
+          --header "Content-Type: application/json" \
+          --header "Authorization: Bearer ${API_KEY}"
+
+        echo "Project ${PROJECT_ID} has been deleted"
+      env:
+        API_HOST: ${{ inputs.api_host }}
+        API_KEY: ${{ inputs.api_key }}
+        PROJECT_ID: ${{ inputs.project_id }}

.github/actions/run-python-test-set/action.yml

@@ -0,0 +1,219 @@
+name: 'Run python test'
+description: 'Runs a Neon python test set, performing all the required preparations before'
+
+inputs:
+  build_type:
+    description: 'Type of Rust (neon) and C (postgres) builds. Must be "release" or "debug", or "remote" for the remote cluster'
+    required: true
+  test_selection:
+    description: 'A python test suite to run'
+    required: true
+  extra_params:
+    description: 'Arbitrary parameters to pytest. For example "-s" to prevent capturing stdout/stderr'
+    required: false
+    default: ''
+  needs_postgres_source:
+    description: 'Set to true if the test suite requires postgres source checked out'
+    required: false
+    default: 'false'
+  run_in_parallel:
+    description: 'Whether to run tests in parallel'
+    required: false
+    default: 'true'
+  save_perf_report:
+    description: 'Whether to upload the performance report, if true PERF_TEST_RESULT_CONNSTR env variable should be set'
+    required: false
+    default: 'false'
+  run_with_real_s3:
+    description: 'Whether to pass real s3 credentials to the test suite'
+    required: false
+    default: 'false'
+  real_s3_bucket:
+    description: 'Bucket name for real s3 tests'
+    required: false
+    default: ''
+  real_s3_region:
+    description: 'Region name for real s3 tests'
+    required: false
+    default: ''
+  rerun_flaky:
+    description: 'Whether to rerun flaky tests'
+    required: false
+    default: 'false'
+  pg_version:
+    description: 'Postgres version to use for tests'
+    required: false
+    default: 'v14'
+
+runs:
+  using: "composite"
+  steps:
+    - name: Get Neon artifact
+      if: inputs.build_type != 'remote'
+      uses: ./.github/actions/download
+      with:
+        name: neon-${{ runner.os }}-${{ inputs.build_type }}-artifact
+        path: /tmp/neon
+
+    - name: Download Neon binaries for the previous release
+      if: inputs.build_type != 'remote'
+      uses: ./.github/actions/download
+      with:
+        name: neon-${{ runner.os }}-${{ inputs.build_type }}-artifact
+        path: /tmp/neon-previous
+        prefix: latest
+
+    - name: Download compatibility snapshot
+      if: inputs.build_type != 'remote'
+      uses: ./.github/actions/download
+      with:
+        name: compatibility-snapshot-${{ inputs.build_type }}-pg${{ inputs.pg_version }}
+        path: /tmp/compatibility_snapshot_pg${{ inputs.pg_version }}
+        prefix: latest
+        # The lack of compatibility snapshot (for example, for the new Postgres version)
+        # shouldn't fail the whole job. Only relevant test should fail.
+        skip-if-does-not-exist: true
+
+    - name: Checkout
+      if: inputs.needs_postgres_source == 'true'
+      uses: actions/checkout@v3
+      with:
+        submodules: true
+        fetch-depth: 1
+
+    - name: Cache poetry deps
+      id: cache_poetry
+      uses: actions/cache@v3
+      with:
+        path: ~/.cache/pypoetry/virtualenvs
+        key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
+
+    - name: Install Python deps
+      shell: bash -euxo pipefail {0}
+      run: ./scripts/pysync
+
+    - name: Run pytest
+      env:
+        NEON_BIN: /tmp/neon/bin
+        COMPATIBILITY_NEON_BIN: /tmp/neon-previous/bin
+        COMPATIBILITY_POSTGRES_DISTRIB_DIR: /tmp/neon-previous/pg_install
+        TEST_OUTPUT: /tmp/test_output
+        BUILD_TYPE: ${{ inputs.build_type }}
+        COMPATIBILITY_SNAPSHOT_DIR: /tmp/compatibility_snapshot_pg${{ inputs.pg_version }}
+        ALLOW_BACKWARD_COMPATIBILITY_BREAKAGE: contains(github.event.pull_request.labels.*.name, 'backward compatibility breakage')
+        ALLOW_FORWARD_COMPATIBILITY_BREAKAGE: contains(github.event.pull_request.labels.*.name, 'forward compatibility breakage')
+        RERUN_FLAKY: ${{ inputs.rerun_flaky }}
+        PG_VERSION: ${{ inputs.pg_version }}
+      shell: bash -euxo pipefail {0}
+      run: |
+        # PLATFORM will be embedded in the perf test report
+        # and it is needed to distinguish different environments
+        export PLATFORM=${PLATFORM:-github-actions-selfhosted}
+        export POSTGRES_DISTRIB_DIR=${POSTGRES_DISTRIB_DIR:-/tmp/neon/pg_install}
+        export DEFAULT_PG_VERSION=${PG_VERSION#v}
+
+        if [ "${BUILD_TYPE}" = "remote" ]; then
+          export REMOTE_ENV=1
+        fi
+
+        PERF_REPORT_DIR="$(realpath test_runner/perf-report-local)"
+        rm -rf $PERF_REPORT_DIR
+
+        TEST_SELECTION="test_runner/${{ inputs.test_selection }}"
+        EXTRA_PARAMS="${{ inputs.extra_params }}"
+        if [ -z "$TEST_SELECTION" ]; then
+          echo "test_selection must be set"
+          exit 1
+        fi
+        if [[ "${{ inputs.run_in_parallel }}" == "true" ]]; then
+          # -n16 uses sixteen processes to run tests via pytest-xdist
+          EXTRA_PARAMS="-n16 $EXTRA_PARAMS"
+
+          # --dist=loadgroup points tests marked with @pytest.mark.xdist_group
+          # to the same worker to make @pytest.mark.order work with xdist
+          EXTRA_PARAMS="--dist=loadgroup $EXTRA_PARAMS"
+        fi
+
+        if [[ "${{ inputs.run_with_real_s3 }}" == "true" ]]; then
+          echo "REAL S3 ENABLED"
+          export ENABLE_REAL_S3_REMOTE_STORAGE=nonempty
+          export REMOTE_STORAGE_S3_BUCKET=${{ inputs.real_s3_bucket }}
+          export REMOTE_STORAGE_S3_REGION=${{ inputs.real_s3_region }}
+        fi
+
+        if [[ "${{ inputs.save_perf_report }}" == "true" ]]; then
+          mkdir -p "$PERF_REPORT_DIR"
+          EXTRA_PARAMS="--out-dir $PERF_REPORT_DIR $EXTRA_PARAMS"
+        fi
+
+        if [ "${RERUN_FLAKY}" == "true" ]; then
+          mkdir -p $TEST_OUTPUT
+          poetry run ./scripts/flaky_tests.py "${TEST_RESULT_CONNSTR}" \
+                                              --days 7 \
+                                              --output "$TEST_OUTPUT/flaky.json" \
+                                              --pg-version "${DEFAULT_PG_VERSION}" \
+                                              --build-type "${BUILD_TYPE}"
+
+          EXTRA_PARAMS="--flaky-tests-json $TEST_OUTPUT/flaky.json $EXTRA_PARAMS"
+        fi
+
+        # We use pytest-split plugin to run benchmarks in parallel on different CI runners
+        if [ "${TEST_SELECTION}" = "test_runner/performance" ] && [ "${{ inputs.build_type }}" != "remote" ]; then
+          mkdir -p $TEST_OUTPUT
+          poetry run ./scripts/benchmark_durations.py "${TEST_RESULT_CONNSTR}" --days 10 --output "$TEST_OUTPUT/benchmark_durations.json"
+
+          EXTRA_PARAMS="--durations-path $TEST_OUTPUT/benchmark_durations.json $EXTRA_PARAMS"
+        fi
+
+        if [[ "${{ inputs.build_type }}" == "debug" ]]; then
+          cov_prefix=(scripts/coverage "--profraw-prefix=$GITHUB_JOB" --dir=/tmp/coverage run)
+        elif [[ "${{ inputs.build_type }}" == "release" ]]; then
+          cov_prefix=()
+        else
+          cov_prefix=()
+        fi
+
+        # Wake up the cluster if we use remote neon instance
+        if [ "${{ inputs.build_type }}" = "remote" ] && [ -n "${BENCHMARK_CONNSTR}" ]; then
+          ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/psql ${BENCHMARK_CONNSTR} -c "SELECT version();"
+        fi
+
+        # Run the tests.
+        #
+        # The junit.xml file allows CI tools to display more fine-grained test information
+        # in its "Tests" tab in the results page.
+        # --verbose prints name of each test (helpful when there are
+        # multiple tests in one file)
+        # -rA prints summary in the end
+        # -s is not used to prevent pytest from capturing output, because tests are running
+        # in parallel and logs are mixed between different tests
+        #
+        mkdir -p $TEST_OUTPUT/allure/results
+        "${cov_prefix[@]}" ./scripts/pytest \
+          --junitxml=$TEST_OUTPUT/junit.xml \
+          --alluredir=$TEST_OUTPUT/allure/results \
+          --tb=short \
+          --verbose \
+          -rA $TEST_SELECTION $EXTRA_PARAMS
+
+        if [[ "${{ inputs.save_perf_report }}" == "true" ]]; then
+          export REPORT_FROM="$PERF_REPORT_DIR"
+          export REPORT_TO="$PLATFORM"
+          scripts/generate_and_push_perf_report.sh
+        fi
+
+    - name: Upload compatibility snapshot
+      if: github.ref_name == 'release'
+      uses: ./.github/actions/upload
+      with:
+        name: compatibility-snapshot-${{ inputs.build_type }}-pg${{ inputs.pg_version }}-${{ github.run_id }}
+        # Directory is created by test_compatibility.py::test_create_snapshot, keep the path in sync with the test
+        path: /tmp/test_output/compatibility_snapshot_pg${{ inputs.pg_version }}/
+        prefix: latest
+
+    - name: Upload test results
+      if: ${{ !cancelled() }}
+      uses: ./.github/actions/allure-report-store
+      with:
+        report-dir: /tmp/test_output/allure/results
+        unique-key: ${{ inputs.build_type }}-${{ inputs.pg_version }}

.github/actions/save-coverage-data/action.yml

@@ -0,0 +1,22 @@
+name: 'Merge and upload coverage data'
+description: 'Compresses and uploads the coverage data as an artifact'
+
+runs:
+  using: "composite"
+  steps:
+    - name: Merge coverage data
+      shell: bash -euxo pipefail {0}
+      run: scripts/coverage "--profraw-prefix=$GITHUB_JOB" --dir=/tmp/coverage merge
+
+    - name: Download previous coverage data into the same directory
+      uses: ./.github/actions/download
+      with:
+        name: coverage-data-artifact
+        path: /tmp/coverage
+        skip-if-does-not-exist: true # skip if there's no previous coverage to download
+
+    - name: Upload coverage data
+      uses: ./.github/actions/upload
+      with:
+        name: coverage-data-artifact
+        path: /tmp/coverage

.github/actions/upload/action.yml

@@ -0,0 +1,58 @@
+name: "Upload an artifact"
+description: "Custom upload action"
+inputs:
+  name:
+    description: "Artifact name"
+    required: true
+  path:
+    description: "A directory or file to upload"
+    required: true
+  prefix:
+    description: "S3 prefix. Default is '${GITHUB_RUN_ID}/${GITHUB_RUN_ATTEMPT}'"
+    required: false
+
+runs:
+  using: "composite"
+  steps:
+    - name: Prepare artifact
+      shell: bash -euxo pipefail {0}
+      env:
+        SOURCE: ${{ inputs.path }}
+        ARCHIVE: /tmp/uploads/${{ inputs.name }}.tar.zst
+      run: |
+        mkdir -p $(dirname $ARCHIVE)
+
+        if [ -f ${ARCHIVE} ]; then
+          echo >&2 "File ${ARCHIVE} already exist. Something went wrong before"
+          exit 1
+        fi
+
+        ZSTD_NBTHREADS=0
+        if [ -d  ${SOURCE} ]; then
+          time tar -C ${SOURCE} -cf ${ARCHIVE} --zstd .
+        elif [ -f ${SOURCE} ]; then
+          time tar -cf ${ARCHIVE} --zstd ${SOURCE}
+        elif ! ls ${SOURCE} > /dev/null 2>&1; then
+          echo >&2 "${SOURCE} does not exist"
+          exit 2
+        else
+          echo >&2 "${SOURCE} is neither a directory nor a file, do not know how to handle it"
+          exit 3
+        fi
+
+    - name: Upload artifact
+      shell: bash -euxo pipefail {0}
+      env:
+        SOURCE: ${{ inputs.path }}
+        ARCHIVE: /tmp/uploads/${{ inputs.name }}.tar.zst
+        PREFIX: artifacts/${{ inputs.prefix || format('{0}/{1}', github.run_id, github.run_attempt) }}
+      run: |
+        BUCKET=neon-github-public-dev
+        FILENAME=$(basename $ARCHIVE)
+
+        FILESIZE=$(du -sh ${ARCHIVE} | cut -f1)
+
+        time aws s3 mv --only-show-errors ${ARCHIVE} s3://${BUCKET}/${PREFIX}/${FILENAME}
+
+        # Ref https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions#adding-a-job-summary
+        echo "[${FILENAME}](https://${BUCKET}.s3.amazonaws.com/${PREFIX}/${FILENAME}) ${FILESIZE}" >> ${GITHUB_STEP_SUMMARY}

.github/pull_request_template.md

@@ -0,0 +1,14 @@
+## Problem
+
+## Summary of changes
+
+## Checklist before requesting a review
+
+- [ ] I have performed a self-review of my code.
+- [ ] If it is a core feature, I have added thorough tests.
+- [ ] Do we need to implement analytics? if so did you add the relevant metrics to the dashboard?
+- [ ] If this PR requires public announcement, mark it with /release-notes label and add several sentences in this section.
+
+## Checklist before merging
+
+- [ ] Do not forget to reformat commit message to not include the above checklist

.github/workflows/actionlint.yml

@@ -0,0 +1,31 @@
+name: Lint GitHub Workflows
+
+on:
+  push:
+    branches:
+      - main
+      - release
+    paths:
+      - '.github/workflows/*.ya?ml'
+  pull_request:
+    paths:
+      - '.github/workflows/*.ya?ml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: ${{ github.event_name == 'pull_request' }}
+
+jobs:
+  actionlint:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: reviewdog/action-actionlint@v1
+        env:
+          # SC2046 - Quote this to prevent word splitting. - https://www.shellcheck.net/wiki/SC2046
+          # SC2086 - Double quote to prevent globbing and word splitting. - https://www.shellcheck.net/wiki/SC2086
+          SHELLCHECK_OPTS: --exclude=SC2046,SC2086
+        with:
+          fail_on_error: true
+          filter_mode: nofilter
+          level: error

.github/workflows/approved-for-ci-run.yml

@@ -0,0 +1,118 @@
+name: Handle `approved-for-ci-run` label
+# This workflow helps to run CI pipeline for PRs made by external contributors (from forks).
+
+on:
+  pull_request_target:
+    branches:
+      - main
+    types:
+      # Default types that triggers a workflow ([1]):
+      # - [1] https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request
+      - opened
+      - synchronize
+      - reopened
+      # Types that we wand to handle in addition to keep labels tidy:
+      - closed
+      # Actual magic happens here:
+      - labeled
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
+
+env:
+  GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+  PR_NUMBER: ${{ github.event.pull_request.number }}
+  BRANCH: "ci-run/pr-${{ github.event.pull_request.number }}"
+
+# No permission for GITHUB_TOKEN by default; the **minimal required** set of permissions should be granted in each job.
+permissions: {}
+
+defaults:
+  run:
+    shell: bash -euo pipefail {0}
+
+jobs:
+  remove-label:
+    # Remove `approved-for-ci-run` label if the workflow is triggered by changes in a PR.
+    # The PR should be reviewed and labelled manually again.
+
+    permissions:
+      pull-requests: write # For `gh pr edit`
+
+    if: |
+      contains(fromJSON('["opened", "synchronize", "reopened", "closed"]'), github.event.action) &&
+      contains(github.event.pull_request.labels.*.name, 'approved-for-ci-run')
+
+    runs-on: ubuntu-latest
+
+    steps:
+      - run: gh pr --repo "${GITHUB_REPOSITORY}" edit "${PR_NUMBER}" --remove-label "approved-for-ci-run"
+
+  create-or-update-pr-for-ci-run:
+    # Create local PR for an `approved-for-ci-run` labelled PR to run CI pipeline in it.
+
+    permissions:
+      pull-requests: write # for `gh pr edit`
+      # For `git push` and `gh pr create` we use CI_ACCESS_TOKEN
+
+    if: |
+      github.event.action == 'labeled' &&
+      contains(github.event.pull_request.labels.*.name, 'approved-for-ci-run')
+
+    runs-on: ubuntu-latest
+
+    steps:
+      - run: gh pr --repo "${GITHUB_REPOSITORY}" edit "${PR_NUMBER}" --remove-label "approved-for-ci-run"
+
+      - uses: actions/checkout@v3
+        with:
+          ref: main
+          token: ${{ secrets.CI_ACCESS_TOKEN }}
+
+      - run: gh pr checkout "${PR_NUMBER}"
+
+      - run: git checkout -b "${BRANCH}"
+
+      - run: git push --force origin "${BRANCH}"
+
+      - name: Create a Pull Request for CI run (if required)
+        env:
+          GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
+        run: |
+          cat << EOF > body.md
+            This Pull Request is created automatically to run the CI pipeline for #${PR_NUMBER}
+
+            Please do not alter or merge/close it.
+
+            Feel free to review/comment/discuss the original PR #${PR_NUMBER}.
+          EOF
+
+          ALREADY_CREATED="$(gh pr --repo ${GITHUB_REPOSITORY} list --head ${BRANCH} --base main --json number --jq '.[].number')"
+          if [ -z "${ALREADY_CREATED}" ]; then
+            gh pr --repo "${GITHUB_REPOSITORY}" create --title "CI run for PR #${PR_NUMBER}" \
+                                                       --body-file "body.md" \
+                                                       --head "${BRANCH}" \
+                                                       --base "main" \
+                                                       --draft
+          fi
+
+  cleanup:
+    # Close PRs and delete branchs if the original PR is closed.
+
+    permissions:
+      contents: write # for `--delete-branch` flag in `gh pr close`
+      pull-requests: write # for `gh pr close`
+
+    if: |
+      github.event.action == 'closed' &&
+      github.event.pull_request.head.repo.full_name != github.repository
+
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Close PR and delete `ci-run/pr-${{ env.PR_NUMBER }}` branch
+        run: |
+          CLOSED="$(gh pr --repo ${GITHUB_REPOSITORY} list --head ${BRANCH} --json 'closed' --jq '.[].closed')"
+          if [ "${CLOSED}" == "false" ]; then
+            gh pr --repo "${GITHUB_REPOSITORY}" close "${BRANCH}" --delete-branch
+          fi

.github/workflows/benchmarking.yml

@@ -0,0 +1,609 @@
+name: Benchmarking
+
+on:
+  # uncomment to run on push for debugging your PR
+  # push:
+  #   branches: [ your branch ]
+  schedule:
+    # * is a special character in YAML so you have to quote this string
+    #          ┌───────────── minute (0 - 59)
+    #          │ ┌───────────── hour (0 - 23)
+    #          │ │ ┌───────────── day of the month (1 - 31)
+    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
+    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
+    - cron:  '0 3 * * *' # run once a day, timezone is utc
+
+  workflow_dispatch: # adds ability to run this manually
+    inputs:
+      region_id:
+        description: 'Project region id. If not set, the default region will be used'
+        required: false
+        default: 'aws-us-east-2'
+      save_perf_report:
+        type: boolean
+        description: 'Publish perf report. If not set, the report will be published only for the main branch'
+        required: false
+
+defaults:
+  run:
+    shell: bash -euxo pipefail {0}
+
+concurrency:
+  # Allow only one workflow per any non-`main` branch.
+  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
+  cancel-in-progress: true
+
+jobs:
+  bench:
+    env:
+      TEST_PG_BENCH_DURATIONS_MATRIX: "300"
+      TEST_PG_BENCH_SCALES_MATRIX: "10,100"
+      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
+      DEFAULT_PG_VERSION: 14
+      TEST_OUTPUT: /tmp/test_output
+      BUILD_TYPE: remote
+      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
+      PLATFORM: "neon-staging"
+
+    runs-on: [ self-hosted, us-east-2, x64 ]
+    container:
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      options: --init
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Download Neon artifact
+      uses: ./.github/actions/download
+      with:
+        name: neon-${{ runner.os }}-release-artifact
+        path: /tmp/neon/
+        prefix: latest
+
+    - name: Create Neon Project
+      id: create-neon-project
+      uses: ./.github/actions/neon-project-create
+      with:
+        region_id: ${{ github.event.inputs.region_id || 'aws-us-east-2' }}
+        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+
+    - name: Run benchmark
+      uses: ./.github/actions/run-python-test-set
+      with:
+        build_type: ${{ env.BUILD_TYPE }}
+        test_selection: performance
+        run_in_parallel: false
+        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
+        # Set --sparse-ordering option of pytest-order plugin
+        # to ensure tests are running in order of appears in the file.
+        # It's important for test_perf_pgbench.py::test_pgbench_remote_* tests
+        extra_params: -m remote_cluster --sparse-ordering --timeout 5400 --ignore test_runner/performance/test_perf_olap.py
+      env:
+        BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
+        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
+        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
+
+    - name: Delete Neon Project
+      if: ${{ always() }}
+      uses: ./.github/actions/neon-project-delete
+      with:
+        project_id: ${{ steps.create-neon-project.outputs.project_id }}
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+
+    - name: Create Allure report
+      if: ${{ !cancelled() }}
+      uses: ./.github/actions/allure-report-generate
+
+    - name: Post to a Slack channel
+      if: ${{ github.event.schedule && failure() }}
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C033QLM5P7D" # dev-staging-stream
+        slack-message: "Periodic perf testing: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
+
+  generate-matrices:
+    # Create matrices for the benchmarking jobs, so we run benchmarks on rds only once a week (on Saturday)
+    #
+    # Available platforms:
+    # - neon-captest-new: Freshly created project (1 CU)
+    # - neon-captest-freetier: Use freetier-sized compute (0.25 CU)
+    # - neon-captest-reuse: Reusing existing project
+    # - rds-aurora: Aurora Postgres Serverless v2 with autoscaling from 0.5 to 2 ACUs
+    # - rds-postgres: RDS Postgres db.m5.large instance (2 vCPU, 8 GiB) with gp3 EBS storage
+    runs-on: ubuntu-latest
+    outputs:
+      pgbench-compare-matrix: ${{ steps.pgbench-compare-matrix.outputs.matrix }}
+      olap-compare-matrix: ${{ steps.olap-compare-matrix.outputs.matrix }}
+      tpch-compare-matrix: ${{ steps.tpch-compare-matrix.outputs.matrix }}
+
+    steps:
+    - name: Generate matrix for pgbench benchmark
+      id: pgbench-compare-matrix
+      run: |
+        matrix='{
+          "platform": [
+            "neon-captest-new",
+            "neon-captest-reuse",
+            "neonvm-captest-new"
+          ],
+          "db_size": [ "10gb" ],
+          "include": [{ "platform": "neon-captest-freetier",   "db_size": "3gb"  },
+                      { "platform": "neon-captest-new",        "db_size": "50gb" },
+                      { "platform": "neonvm-captest-freetier", "db_size": "3gb"  },
+                      { "platform": "neonvm-captest-new",      "db_size": "50gb" }]
+        }'
+
+        if [ "$(date +%A)" = "Saturday" ]; then
+          matrix=$(echo "$matrix" | jq '.include += [{ "platform": "rds-postgres", "db_size": "10gb"},
+                                                   { "platform": "rds-aurora",   "db_size": "50gb"}]')
+        fi
+
+        echo "matrix=$(echo "$matrix" | jq --compact-output '.')" >> $GITHUB_OUTPUT
+
+    - name: Generate matrix for OLAP benchmarks
+      id: olap-compare-matrix
+      run: |
+        matrix='{
+          "platform": [
+            "neon-captest-reuse"
+          ]
+        }'
+
+        if [ "$(date +%A)" = "Saturday" ]; then
+          matrix=$(echo "$matrix" | jq '.include += [{ "platform": "rds-postgres" },
+                                                   { "platform": "rds-aurora"   }]')
+        fi
+
+        echo "matrix=$(echo "$matrix" | jq --compact-output '.')" >> $GITHUB_OUTPUT
+
+    - name: Generate matrix for TPC-H benchmarks
+      id: tpch-compare-matrix
+      run: |
+        matrix='{
+          "platform": [
+            "neon-captest-reuse"
+          ],
+          "scale": [
+            "10"
+          ]
+        }'
+
+        if [ "$(date +%A)" = "Saturday" ]; then
+          matrix=$(echo "$matrix" | jq '.include += [{ "platform": "rds-postgres", "scale": "10" },
+                                                   { "platform": "rds-aurora",   "scale": "10" }]')
+        fi
+
+        echo "matrix=$(echo "$matrix" | jq --compact-output '.')" >> $GITHUB_OUTPUT
+
+  pgbench-compare:
+    needs: [ generate-matrices ]
+
+    strategy:
+      fail-fast: false
+      matrix: ${{fromJson(needs.generate-matrices.outputs.pgbench-compare-matrix)}}
+
+    env:
+      TEST_PG_BENCH_DURATIONS_MATRIX: "60m"
+      TEST_PG_BENCH_SCALES_MATRIX: ${{ matrix.db_size }}
+      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
+      DEFAULT_PG_VERSION: 14
+      TEST_OUTPUT: /tmp/test_output
+      BUILD_TYPE: remote
+      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
+      PLATFORM: ${{ matrix.platform }}
+
+    runs-on: [ self-hosted, us-east-2, x64 ]
+    container:
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      options: --init
+
+    # Increase timeout to 8h, default timeout is 6h
+    timeout-minutes: 480
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Download Neon artifact
+      uses: ./.github/actions/download
+      with:
+        name: neon-${{ runner.os }}-release-artifact
+        path: /tmp/neon/
+        prefix: latest
+
+    - name: Add Postgres binaries to PATH
+      run: |
+        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
+        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
+
+    - name: Create Neon Project
+      if: contains(fromJson('["neon-captest-new", "neon-captest-freetier", "neonvm-captest-new", "neonvm-captest-freetier"]'), matrix.platform)
+      id: create-neon-project
+      uses: ./.github/actions/neon-project-create
+      with:
+        region_id: ${{ github.event.inputs.region_id || 'aws-us-east-2' }}
+        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+        compute_units: ${{ (matrix.platform == 'neon-captest-freetier' && '[0.25, 0.25]') || '[1, 1]' }}
+        provisioner: ${{ (contains(matrix.platform, 'neonvm-') && 'k8s-neonvm') || 'k8s-pod' }}
+
+    - name: Set up Connection String
+      id: set-up-connstr
+      run: |
+        case "${PLATFORM}" in
+          neon-captest-reuse)
+            CONNSTR=${{ secrets.BENCHMARK_CAPTEST_CONNSTR }}
+            ;;
+          neon-captest-new | neon-captest-freetier | neonvm-captest-new | neonvm-captest-freetier)
+            CONNSTR=${{ steps.create-neon-project.outputs.dsn }}
+            ;;
+          rds-aurora)
+            CONNSTR=${{ secrets.BENCHMARK_RDS_AURORA_CONNSTR }}
+            ;;
+          rds-postgres)
+            CONNSTR=${{ secrets.BENCHMARK_RDS_POSTGRES_CONNSTR }}
+            ;;
+          *)
+            echo >&2 "Unknown PLATFORM=${PLATFORM}"
+            exit 1
+            ;;
+        esac
+
+        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
+
+        QUERY="SELECT version();"
+        if [[ "${PLATFORM}" = "neon"* ]]; then
+          QUERY="${QUERY} SHOW neon.tenant_id; SHOW neon.timeline_id;"
+        fi
+        psql ${CONNSTR} -c "${QUERY}"
+
+    - name: Benchmark init
+      uses: ./.github/actions/run-python-test-set
+      with:
+        build_type: ${{ env.BUILD_TYPE }}
+        test_selection: performance
+        run_in_parallel: false
+        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
+        extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_init
+      env:
+        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
+        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
+        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
+
+    - name: Benchmark simple-update
+      uses: ./.github/actions/run-python-test-set
+      with:
+        build_type: ${{ env.BUILD_TYPE }}
+        test_selection: performance
+        run_in_parallel: false
+        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
+        extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_simple_update
+      env:
+        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
+        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
+        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
+
+    - name: Benchmark select-only
+      uses: ./.github/actions/run-python-test-set
+      with:
+        build_type: ${{ env.BUILD_TYPE }}
+        test_selection: performance
+        run_in_parallel: false
+        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
+        extra_params: -m remote_cluster --timeout 21600 -k test_pgbench_remote_select_only
+      env:
+        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
+        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
+        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
+
+    - name: Delete Neon Project
+      if: ${{ steps.create-neon-project.outputs.project_id && always() }}
+      uses: ./.github/actions/neon-project-delete
+      with:
+        project_id: ${{ steps.create-neon-project.outputs.project_id }}
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+
+    - name: Create Allure report
+      if: ${{ !cancelled() }}
+      uses: ./.github/actions/allure-report-generate
+
+    - name: Post to a Slack channel
+      if: ${{ github.event.schedule && failure() }}
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C033QLM5P7D" # dev-staging-stream
+        slack-message: "Periodic perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
+
+  clickbench-compare:
+    # ClichBench DB for rds-aurora and rds-Postgres deployed to the same clusters
+    # we use for performance testing in pgbench-compare.
+    # Run this job only when pgbench-compare is finished to avoid the intersection.
+    # We might change it after https://github.com/neondatabase/neon/issues/2900.
+    #
+    # *_CLICKBENCH_CONNSTR: Genuine ClickBench DB with ~100M rows
+    # *_CLICKBENCH_10M_CONNSTR: DB with the first 10M rows of ClickBench DB
+    if: ${{ !cancelled() }}
+    needs: [ generate-matrices, pgbench-compare ]
+
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.generate-matrices.outputs.olap-compare-matrix) }}
+
+    env:
+      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
+      DEFAULT_PG_VERSION: 14
+      TEST_OUTPUT: /tmp/test_output
+      BUILD_TYPE: remote
+      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
+      PLATFORM: ${{ matrix.platform }}
+
+    runs-on: [ self-hosted, us-east-2, x64 ]
+    container:
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      options: --init
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Download Neon artifact
+      uses: ./.github/actions/download
+      with:
+        name: neon-${{ runner.os }}-release-artifact
+        path: /tmp/neon/
+        prefix: latest
+
+    - name: Add Postgres binaries to PATH
+      run: |
+        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
+        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
+
+    - name: Set up Connection String
+      id: set-up-connstr
+      run: |
+        case "${PLATFORM}" in
+          neon-captest-reuse)
+            CONNSTR=${{ secrets.BENCHMARK_CAPTEST_CLICKBENCH_10M_CONNSTR }}
+            ;;
+          rds-aurora)
+            CONNSTR=${{ secrets.BENCHMARK_RDS_AURORA_CLICKBENCH_10M_CONNSTR }}
+            ;;
+          rds-postgres)
+            CONNSTR=${{ secrets.BENCHMARK_RDS_POSTGRES_CLICKBENCH_10M_CONNSTR }}
+            ;;
+          *)
+            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
+            exit 1
+            ;;
+        esac
+
+        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
+
+        QUERY="SELECT version();"
+        if [[ "${PLATFORM}" = "neon"* ]]; then
+          QUERY="${QUERY} SHOW neon.tenant_id; SHOW neon.timeline_id;"
+        fi
+        psql ${CONNSTR} -c "${QUERY}"
+
+    - name: ClickBench benchmark
+      uses: ./.github/actions/run-python-test-set
+      with:
+        build_type: ${{ env.BUILD_TYPE }}
+        test_selection: performance/test_perf_olap.py
+        run_in_parallel: false
+        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
+        extra_params: -m remote_cluster --timeout 21600 -k test_clickbench
+      env:
+        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
+        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
+        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
+        TEST_OLAP_SCALE: 10
+
+    - name: Create Allure report
+      if: ${{ !cancelled() }}
+      uses: ./.github/actions/allure-report-generate
+
+    - name: Post to a Slack channel
+      if: ${{ github.event.schedule && failure() }}
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C033QLM5P7D" # dev-staging-stream
+        slack-message: "Periodic OLAP perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
+
+  tpch-compare:
+    # TCP-H DB for rds-aurora and rds-Postgres deployed to the same clusters
+    # we use for performance testing in pgbench-compare & clickbench-compare.
+    # Run this job only when clickbench-compare is finished to avoid the intersection.
+    # We might change it after https://github.com/neondatabase/neon/issues/2900.
+    #
+    # *_TPCH_S10_CONNSTR: DB generated with scale factor 10 (~10 GB)
+    if: ${{ !cancelled() }}
+    needs: [ generate-matrices, clickbench-compare ]
+
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.generate-matrices.outputs.tpch-compare-matrix) }}
+
+    env:
+      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
+      DEFAULT_PG_VERSION: 14
+      TEST_OUTPUT: /tmp/test_output
+      BUILD_TYPE: remote
+      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
+      PLATFORM: ${{ matrix.platform }}
+      TEST_OLAP_SCALE: ${{ matrix.scale }}
+
+    runs-on: [ self-hosted, us-east-2, x64 ]
+    container:
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      options: --init
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Download Neon artifact
+      uses: ./.github/actions/download
+      with:
+        name: neon-${{ runner.os }}-release-artifact
+        path: /tmp/neon/
+        prefix: latest
+
+    - name: Add Postgres binaries to PATH
+      run: |
+        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
+        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
+
+    - name: Get Connstring Secret Name
+      run: |
+        case "${PLATFORM}" in
+          neon-captest-reuse)
+            ENV_PLATFORM=CAPTEST_TPCH
+            ;;
+          rds-aurora)
+            ENV_PLATFORM=RDS_AURORA_TPCH
+            ;;
+          rds-postgres)
+            ENV_PLATFORM=RDS_AURORA_TPCH
+            ;;
+          *)
+            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
+            exit 1
+            ;;
+        esac
+
+        CONNSTR_SECRET_NAME="BENCHMARK_${ENV_PLATFORM}_S${TEST_OLAP_SCALE}_CONNSTR"
+        echo "CONNSTR_SECRET_NAME=${CONNSTR_SECRET_NAME}" >> $GITHUB_ENV
+
+    - name: Set up Connection String
+      id: set-up-connstr
+      run: |
+        CONNSTR=${{ secrets[env.CONNSTR_SECRET_NAME] }}
+
+        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
+
+        QUERY="SELECT version();"
+        if [[ "${PLATFORM}" = "neon"* ]]; then
+          QUERY="${QUERY} SHOW neon.tenant_id; SHOW neon.timeline_id;"
+        fi
+        psql ${CONNSTR} -c "${QUERY}"
+
+    - name: Run TPC-H benchmark
+      uses: ./.github/actions/run-python-test-set
+      with:
+        build_type: ${{ env.BUILD_TYPE }}
+        test_selection: performance/test_perf_olap.py
+        run_in_parallel: false
+        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
+        extra_params: -m remote_cluster --timeout 21600 -k test_tpch
+      env:
+        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
+        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
+        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
+        TEST_OLAP_SCALE: ${{ matrix.scale }}
+
+    - name: Create Allure report
+      if: ${{ !cancelled() }}
+      uses: ./.github/actions/allure-report-generate
+
+    - name: Post to a Slack channel
+      if: ${{ github.event.schedule && failure() }}
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C033QLM5P7D" # dev-staging-stream
+        slack-message: "Periodic TPC-H perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}
+
+  user-examples-compare:
+    if: ${{ !cancelled() }}
+    needs: [ generate-matrices, tpch-compare ]
+
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.generate-matrices.outputs.olap-compare-matrix) }}
+
+    env:
+      POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
+      DEFAULT_PG_VERSION: 14
+      TEST_OUTPUT: /tmp/test_output
+      BUILD_TYPE: remote
+      SAVE_PERF_REPORT: ${{ github.event.inputs.save_perf_report || ( github.ref_name == 'main' ) }}
+      PLATFORM: ${{ matrix.platform }}
+
+    runs-on: [ self-hosted, us-east-2, x64 ]
+    container:
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      options: --init
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Download Neon artifact
+      uses: ./.github/actions/download
+      with:
+        name: neon-${{ runner.os }}-release-artifact
+        path: /tmp/neon/
+        prefix: latest
+
+    - name: Add Postgres binaries to PATH
+      run: |
+        ${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin/pgbench --version
+        echo "${POSTGRES_DISTRIB_DIR}/v${DEFAULT_PG_VERSION}/bin" >> $GITHUB_PATH
+
+    - name: Set up Connection String
+      id: set-up-connstr
+      run: |
+        case "${PLATFORM}" in
+          neon-captest-reuse)
+            CONNSTR=${{ secrets.BENCHMARK_USER_EXAMPLE_CAPTEST_CONNSTR }}
+            ;;
+          rds-aurora)
+            CONNSTR=${{ secrets.BENCHMARK_USER_EXAMPLE_RDS_AURORA_CONNSTR }}
+            ;;
+          rds-postgres)
+            CONNSTR=${{ secrets.BENCHMARK_USER_EXAMPLE_RDS_POSTGRES_CONNSTR }}
+            ;;
+          *)
+            echo >&2 "Unknown PLATFORM=${PLATFORM}. Allowed only 'neon-captest-reuse', 'rds-aurora', or 'rds-postgres'"
+            exit 1
+            ;;
+        esac
+
+        echo "connstr=${CONNSTR}" >> $GITHUB_OUTPUT
+
+        QUERY="SELECT version();"
+        if [[ "${PLATFORM}" = "neon"* ]]; then
+          QUERY="${QUERY} SHOW neon.tenant_id; SHOW neon.timeline_id;"
+        fi
+        psql ${CONNSTR} -c "${QUERY}"
+
+    - name: Run user examples
+      uses: ./.github/actions/run-python-test-set
+      with:
+        build_type: ${{ env.BUILD_TYPE }}
+        test_selection: performance/test_perf_olap.py
+        run_in_parallel: false
+        save_perf_report: ${{ env.SAVE_PERF_REPORT }}
+        extra_params: -m remote_cluster --timeout 21600 -k test_user_examples
+      env:
+        VIP_VAP_ACCESS_TOKEN: "${{ secrets.VIP_VAP_ACCESS_TOKEN }}"
+        PERF_TEST_RESULT_CONNSTR: "${{ secrets.PERF_TEST_RESULT_CONNSTR }}"
+        BENCHMARK_CONNSTR: ${{ steps.set-up-connstr.outputs.connstr }}
+
+    - name: Create Allure report
+      if: ${{ !cancelled() }}
+      uses: ./.github/actions/allure-report-generate
+
+    - name: Post to a Slack channel
+      if: ${{ github.event.schedule && failure() }}
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C033QLM5P7D" # dev-staging-stream
+        slack-message: "Periodic User example perf testing ${{ matrix.platform }}: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}

.github/workflows/neon_extra_builds.yml

@@ -0,0 +1,175 @@
+name: Check neon with extra platform builds
+
+on:
+  push:
+    branches:
+      - main
+  pull_request:
+
+defaults:
+  run:
+    shell: bash -euxo pipefail {0}
+
+concurrency:
+  # Allow only one workflow per any non-`main` branch.
+  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
+  cancel-in-progress: true
+
+env:
+  RUST_BACKTRACE: 1
+  COPT: '-Werror'
+
+jobs:
+  check-macos-build:
+    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-extra-build-macos')
+    timeout-minutes: 90
+    runs-on: macos-latest
+
+    env:
+      # Use release build only, to have less debug info around
+      # Hence keeping target/ (and general cache size) smaller
+      BUILD_TYPE: release
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+        with:
+          submodules: true
+          fetch-depth: 1
+
+      - name: Install macOS postgres dependencies
+        run: brew install flex bison openssl protobuf icu4c pkg-config
+
+      - name: Set pg 14 revision for caching
+        id: pg_v14_rev
+        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v14) >> $GITHUB_OUTPUT
+
+      - name: Set pg 15 revision for caching
+        id: pg_v15_rev
+        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v15) >> $GITHUB_OUTPUT
+
+      - name: Set pg 16 revision for caching
+        id: pg_v16_rev
+        run: echo pg_rev=$(git rev-parse HEAD:vendor/postgres-v16) >> $GITHUB_OUTPUT
+
+      - name: Cache postgres v14 build
+        id: cache_pg_14
+        uses: actions/cache@v3
+        with:
+          path: pg_install/v14
+          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v14_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
+
+      - name: Cache postgres v15 build
+        id: cache_pg_15
+        uses: actions/cache@v3
+        with:
+          path: pg_install/v15
+          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v15_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
+
+      - name: Cache postgres v16 build
+        id: cache_pg_16
+        uses: actions/cache@v3
+        with:
+          path: pg_install/v16
+          key: v1-${{ runner.os }}-${{ env.BUILD_TYPE }}-pg-${{ steps.pg_v16_rev.outputs.pg_rev }}-${{ hashFiles('Makefile') }}
+
+      - name: Set extra env for macOS
+        run: |
+          echo 'LDFLAGS=-L/usr/local/opt/openssl@3/lib' >> $GITHUB_ENV
+          echo 'CPPFLAGS=-I/usr/local/opt/openssl@3/include' >> $GITHUB_ENV
+
+      - name: Cache cargo deps
+        uses: actions/cache@v3
+        with:
+          path: |
+            ~/.cargo/registry
+            !~/.cargo/registry/src
+            ~/.cargo/git
+            target
+          key: v1-${{ runner.os }}-cargo-${{ hashFiles('./Cargo.lock') }}-${{ hashFiles('./rust-toolchain.toml') }}-rust
+
+      - name: Build postgres v14
+        if: steps.cache_pg_14.outputs.cache-hit != 'true'
+        run: make postgres-v14 -j$(sysctl -n hw.ncpu)
+
+      - name: Build postgres v15
+        if: steps.cache_pg_15.outputs.cache-hit != 'true'
+        run: make postgres-v15 -j$(sysctl -n hw.ncpu)
+
+      - name: Build postgres v16
+        if: steps.cache_pg_16.outputs.cache-hit != 'true'
+        run: make postgres-v16 -j$(sysctl -n hw.ncpu)
+
+      - name: Build neon extensions
+        run: make neon-pg-ext -j$(sysctl -n hw.ncpu)
+
+      - name: Build walproposer-lib
+        run: make walproposer-lib -j$(sysctl -n hw.ncpu)
+
+      - name: Run cargo build
+        run: cargo build --all --release
+
+      - name: Check that no warnings are produced
+        run: ./run_clippy.sh
+
+  gather-rust-build-stats:
+    if: github.ref_name == 'main' || contains(github.event.pull_request.labels.*.name, 'run-extra-build-stats')
+    runs-on: [ self-hosted, gen3, large ]
+    container:
+      image: 369495373322.dkr.ecr.eu-central-1.amazonaws.com/rust:pinned
+      options: --init
+
+    env:
+      BUILD_TYPE: release
+      # remove the cachepot wrapper and build without crate caches
+      RUSTC_WRAPPER: ""
+      # build with incremental compilation produce partial results
+      # so do not attempt to cache this build, also disable the incremental compilation
+      CARGO_INCREMENTAL: 0
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+        with:
+          submodules: true
+          fetch-depth: 1
+
+      # Some of our rust modules use FFI and need those to be checked
+      - name: Get postgres headers
+        run: make postgres-headers -j$(nproc)
+
+      - name: Build walproposer-lib
+        run: make walproposer-lib -j$(nproc)
+
+      - name: Produce the build stats
+        run: cargo build --all --release --timings
+
+      - name: Upload the build stats
+        id: upload-stats
+        env:
+          BUCKET: neon-github-public-dev
+          SHA: ${{ github.event.pull_request.head.sha || github.sha }}
+          AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_DEV }}
+          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_KEY_DEV }}
+        run: |
+          REPORT_URL=https://${BUCKET}.s3.amazonaws.com/build-stats/${SHA}/${GITHUB_RUN_ID}/cargo-timing.html
+          aws s3 cp --only-show-errors ./target/cargo-timings/cargo-timing.html "s3://${BUCKET}/build-stats/${SHA}/${GITHUB_RUN_ID}/"
+          echo "report-url=${REPORT_URL}" >> $GITHUB_OUTPUT
+
+      - name: Publish build stats report
+        uses: actions/github-script@v6
+        env:
+          REPORT_URL: ${{ steps.upload-stats.outputs.report-url }}
+          SHA: ${{ github.event.pull_request.head.sha || github.sha }}
+        with:
+          script: |
+            const { REPORT_URL, SHA } = process.env
+
+            await github.rest.repos.createCommitStatus({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              sha: `${SHA}`,
+              state: 'success',
+              target_url: `${REPORT_URL}`,
+              context: `Build stats (release)`,
+            })

.github/workflows/pg_clients.yml

@@ -0,0 +1,99 @@
+name: Test Postgres client libraries
+
+on:
+  schedule:
+    # * is a special character in YAML so you have to quote this string
+    #          ┌───────────── minute (0 - 59)
+    #          │ ┌───────────── hour (0 - 23)
+    #          │ │ ┌───────────── day of the month (1 - 31)
+    #          │ │ │ ┌───────────── month (1 - 12 or JAN-DEC)
+    #          │ │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
+    - cron:  '23 02 * * *' # run once a day, timezone is utc
+
+  workflow_dispatch:
+
+concurrency:
+  # Allow only one workflow per any non-`main` branch.
+  group: ${{ github.workflow }}-${{ github.ref_name }}-${{ github.ref_name == 'main' && github.sha || 'anysha' }}
+  cancel-in-progress: true
+
+jobs:
+  test-postgres-client-libs:
+    # TODO: switch to gen2 runner, requires docker
+    runs-on: [ ubuntu-latest ]
+
+    env:
+      DEFAULT_PG_VERSION: 14
+      TEST_OUTPUT: /tmp/test_output
+
+    steps:
+    - name: Checkout
+      uses: actions/checkout@v3
+
+    - uses: actions/setup-python@v4
+      with:
+        python-version: 3.9
+
+    - name: Install Poetry
+      uses: snok/install-poetry@v1
+
+    - name: Cache poetry deps
+      id: cache_poetry
+      uses: actions/cache@v3
+      with:
+        path: ~/.cache/pypoetry/virtualenvs
+        key: v1-${{ runner.os }}-python-deps-${{ hashFiles('poetry.lock') }}
+
+    - name: Install Python deps
+      shell: bash -euxo pipefail {0}
+      run: ./scripts/pysync
+
+    - name: Create Neon Project
+      id: create-neon-project
+      uses: ./.github/actions/neon-project-create
+      with:
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+        postgres_version: ${{ env.DEFAULT_PG_VERSION }}
+
+    - name: Run pytest
+      env:
+        REMOTE_ENV: 1
+        BENCHMARK_CONNSTR: ${{ steps.create-neon-project.outputs.dsn }}
+        POSTGRES_DISTRIB_DIR: /tmp/neon/pg_install
+      shell: bash -euxo pipefail {0}
+      run: |
+        # Test framework expects we have psql binary;
+        # but since we don't really need it in this test, let's mock it
+        mkdir -p "$POSTGRES_DISTRIB_DIR/v${DEFAULT_PG_VERSION}/bin" && touch "$POSTGRES_DISTRIB_DIR/v${DEFAULT_PG_VERSION}/bin/psql";
+        ./scripts/pytest \
+          --junitxml=$TEST_OUTPUT/junit.xml \
+          --tb=short \
+          --verbose \
+          -m "remote_cluster" \
+          -rA "test_runner/pg_clients"
+
+    - name: Delete Neon Project
+      if: ${{ always() }}
+      uses: ./.github/actions/neon-project-delete
+      with:
+        project_id: ${{ steps.create-neon-project.outputs.project_id }}
+        api_key: ${{ secrets.NEON_STAGING_API_KEY }}
+
+    # We use GitHub's action upload-artifact because `ubuntu-latest` doesn't have configured AWS CLI.
+    # It will be fixed after switching to gen2 runner
+    - name: Upload python test logs
+      if: always()
+      uses: actions/upload-artifact@v3
+      with:
+        retention-days: 7
+        name: python-test-pg_clients-${{ runner.os }}-stage-logs
+        path: ${{ env.TEST_OUTPUT }}
+
+    - name: Post to a Slack channel
+      if: ${{ github.event.schedule && failure() }}
+      uses: slackapi/slack-github-action@v1
+      with:
+        channel-id: "C033QLM5P7D" # dev-staging-stream
+        slack-message: "Testing Postgres clients: ${{ job.status }}\n${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}"
+      env:
+        SLACK_BOT_TOKEN: ${{ secrets.SLACK_BOT_TOKEN }}

.github/workflows/release-notify.yml

@@ -0,0 +1,29 @@
+name: Notify Slack channel about upcoming release
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.number }}
+  cancel-in-progress: true
+
+on:
+  pull_request:
+    branches:
+      - release
+    types:
+      # Default types that triggers a workflow:
+      # - https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request
+      - opened
+      - synchronize
+      - reopened
+      # Additional types that we want to handle:
+      - closed
+
+jobs:
+  notify:
+    runs-on: [ ubuntu-latest ]
+
+    steps:
+      - uses: neondatabase/dev-actions/release-pr-notify@main
+        with:
+          slack-token: ${{ secrets.SLACK_BOT_TOKEN }}
+          slack-channel-id: ${{ vars.SLACK_UPCOMING_RELEASE_CHANNEL_ID || 'C05QQ9J1BRC' }} # if not set, then `#test-release-notifications`
+          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -0,0 +1,44 @@
+name: Create Release Branch
+
+on:
+  schedule:
+    - cron: '0 7 * * 5'
+  workflow_dispatch:
+
+jobs:
+  create_release_branch:
+    runs-on: [ ubuntu-latest ]
+
+    permissions:
+      contents: write # for `git push`
+
+    steps:
+    - name: Check out code
+      uses: actions/checkout@v4
+      with:
+        ref: main
+
+    - name: Get current date
+      id: date
+      run: echo "date=$(date +'%Y-%m-%d')" >> $GITHUB_OUTPUT
+
+    - name: Create release branch
+      run: git checkout -b releases/${{ steps.date.outputs.date }}
+
+    - name: Push new branch
+      run: git push origin releases/${{ steps.date.outputs.date }}
+
+    - name: Create pull request into release
+      env:
+        GH_TOKEN: ${{ secrets.CI_ACCESS_TOKEN }}
+      run: |
+        cat << EOF > body.md
+          ## Release ${{ steps.date.outputs.date }}
+
+          **Please merge this PR using 'Create a merge commit'!**
+        EOF
+
+        gh pr create --title "Release ${{ steps.date.outputs.date }}" \
+                     --body-file "body.md" \
+                     --head "releases/${{ steps.date.outputs.date }}" \
+                     --base "release"

.github/workflows/testing.yml

@@ -1,86 +0,0 @@
-name: regression check
-
-on: [push]
-
-jobs:
-  regression-check:
-    timeout-minutes: 10
-    name: run regression test suite
-    runs-on: ubuntu-latest
-
-    steps:
-
-      - name: Checkout
-        uses: actions/checkout@v2
-        with:
-          submodules: true
-          fetch-depth: 2
-
-      - name: Form variables for notification message
-        id: git_info_grab
-        run: |
-          git_stat=$(git show --stat=50)
-          git_stat="${git_stat//'%'/'%25'}"
-          git_stat="${git_stat//$'\n'/'%0A'}"
-          git_stat="${git_stat//$'\r'/'%0D'}"
-          git_stat="${git_stat// / }" # space -> 'Space En', as github tends to eat ordinary spaces
-          echo "::set-output name=git_stat::$git_stat"
-          echo "::set-output name=sha_short::$(git rev-parse --short HEAD)"
-          echo "##[set-output name=git_branch;]$(echo ${GITHUB_REF#refs/heads/})"
-
-      - name: Send notification
-        uses: appleboy/telegram-action@master
-        with:
-          to: ${{ secrets.TELEGRAM_TO }}
-          token: ${{ secrets.TELEGRAM_TOKEN }}
-          format: markdown
-          args: |
-            *@${{ github.actor }} pushed to* [${{ github.repository }}:${{steps.git_info_grab.outputs.git_branch}}](github.com/${{ github.repository }}/commit/${{steps.git_info_grab.outputs.sha_short }})
-
-            ```
-            ${{ steps.git_info_grab.outputs.git_stat }}
-            ```
-
-      - name: Install postgres dependencies
-        run: |
-          sudo apt update
-          sudo apt install build-essential libreadline-dev zlib1g-dev flex bison libxml2-dev libcurl4-openssl-dev
-
-      - name: Set pg revision for caching
-        id: pg_ver
-        run: echo ::set-output name=pg_rev::$(git rev-parse HEAD:vendor/postgres)
-
-      - name: Cache postgres build
-        id: cache_pg
-        uses: actions/cache@v2
-        with:
-          path: |
-            tmp_install/
-          key: ${{ runner.os }}-pg-${{ steps.pg_ver.outputs.pg_rev }}
-
-      - name: Build postgres
-        if: steps.cache_pg.outputs.cache-hit != 'true'
-        run: |
-          ./pgbuild.sh
-
-      - name: Install rust
-        run: |
-          sudo apt install -y cargo
-
-      - name: Cache cargo deps
-        id: cache_cargo
-        uses: actions/cache@v2
-        with:
-          path: |
-            ~/.cargo/registry
-            ~/.cargo/git
-            target
-          key: ${{ runner.os }}-cargo-${{ hashFiles('**/Cargo.lock') }}
-
-      - name: Build
-        run: |
-          cargo build
-
-      - name: Run test
-        run: |
-          cargo test --test test_pageserver -- --nocapture --test-threads=1

.gitignore

@@ -1,5 +1,20 @@
+/pg_install
 /target
 /tmp_check
-/tmp_install
 /tmp_check_cli
+__pycache__/
+test_output/
 .vscode
+.idea
+/.neon
+/integration_tests/.neon
+
+# Coverage
+*.profraw
+*.profdata
+
+*.key
+*.crt
+*.o
+*.so
+*.Po

.gitmodules

@@ -1,4 +1,12 @@
-[submodule "vendor/postgres"]
-	path = vendor/postgres
-	url = https://github.com/libzenith/postgres
-	branch = main
+[submodule "vendor/postgres-v14"]
+	path = vendor/postgres-v14
+	url = https://github.com/neondatabase/postgres.git
+	branch = REL_14_STABLE_neon
+[submodule "vendor/postgres-v15"]
+	path = vendor/postgres-v15
+	url = https://github.com/neondatabase/postgres.git
+	branch = REL_15_STABLE_neon
+[submodule "vendor/postgres-v16"]
+	path = vendor/postgres-v16
+	url = https://github.com/neondatabase/postgres.git
+	branch = REL_16_STABLE_neon

.neon_clippy_args

@@ -0,0 +1,4 @@
+# * `-A unknown_lints` – do not warn about unknown lint suppressions
+#                        that people with newer toolchains might use
+# * `-D warnings`      - fail on any warnings (`cargo` returns non-zero exit status)
+export CLIPPY_COMMON_ARGS="--locked --workspace --all-targets -- -A unknown_lints -D warnings"

CODEOWNERS

@@ -0,0 +1,12 @@
+/compute_tools/ @neondatabase/control-plane @neondatabase/compute
+/control_plane/ @neondatabase/compute @neondatabase/storage
+/libs/pageserver_api/ @neondatabase/compute @neondatabase/storage
+/libs/postgres_ffi/ @neondatabase/compute
+/libs/remote_storage/ @neondatabase/storage
+/libs/safekeeper_api/ @neondatabase/safekeepers
+/libs/vm_monitor/ @neondatabase/autoscaling @neondatabase/compute
+/pageserver/ @neondatabase/storage
+/pgxn/ @neondatabase/compute
+/proxy/ @neondatabase/proxy
+/safekeeper/ @neondatabase/safekeepers
+/vendor/ @neondatabase/compute

CONTRIBUTING.md

@@ -0,0 +1,54 @@
+# How to contribute
+
+Howdy! Usual good software engineering practices apply. Write
+tests. Write comments. Follow standard Rust coding practices where
+possible. Use `cargo fmt` and `cargo clippy` to tidy up formatting.
+
+There are soft spots in the code, which could use cleanup,
+refactoring, additional comments, and so forth. Let's try to raise the
+bar, and clean things up as we go. Try to leave code in a better shape
+than it was before.
+
+## Submitting changes
+
+1. Get at least one +1 on your PR before you push.
+
+   For simple patches, it will only take a minute for someone to review
+it.
+
+2. Don't force push small changes after making the PR ready for review.
+Doing so will force readers to re-read your entire PR, which will delay
+the review process.
+
+3. Always keep the CI green.
+
+   Do not push, if the CI failed on your PR. Even if you think it's not
+your patch's fault. Help to fix the root cause if something else has
+broken the CI, before pushing.
+
+*Happy Hacking!*
+
+# How to run a CI pipeline on Pull Requests from external contributors
+_An instruction for maintainers_
+
+## TL;DR:
+- Review the PR
+- If and only if it looks **safe** (i.e. it doesn't contain any malicious code which could expose secrets or harm the CI), then:
+    - Press the "Approve and run" button in GitHub UI
+    - Add the `approved-for-ci-run` label to the PR
+
+Repeat all steps after any change to the PR.
+- When the changes are ready to get merged — merge the original PR (not the internal one)
+
+## Longer version:
+
+GitHub Actions triggered by the `pull_request` event don't share repository secrets with the forks (for security reasons).
+So, passing the CI pipeline on Pull Requests from external contributors is impossible.
+
+We're using the following approach to make it work:
+- After the review, assign the `approved-for-ci-run` label to the PR if changes look safe
+- A GitHub Action will create an internal branch and a new PR with the same changes (for example, for a PR `#1234`, it'll be a branch `ci-run/pr-1234`)
+- Because the PR is created from the internal branch, it is able to access repository secrets (that's why it's crucial to make sure that the PR doesn't contain any malicious code that could expose our secrets or intentionally harm the CI)
+- The label gets removed automatically, so to run CI again with new changes, the label should be added again (after the review)
+
+For details see [`approved-for-ci-run.yml`](.github/workflows/approved-for-ci-run.yml)

Cargo.toml

@@ -1,10 +1,271 @@
 [workspace]
+resolver = "2"
 members = [
-    "integration_tests",
-    "pageserver",
-    "walkeeper",
-    "zenith",
+    "compute_tools",
     "control_plane",
-    "postgres_ffi",
-    "zenith_utils",
+    "pageserver",
+    "pageserver/ctl",
+    "proxy",
+    "safekeeper",
+    "storage_broker",
+    "s3_scrubber",
+    "workspace_hack",
+    "trace",
+    "libs/compute_api",
+    "libs/pageserver_api",
+    "libs/postgres_ffi",
+    "libs/safekeeper_api",
+    "libs/utils",
+    "libs/consumption_metrics",
+    "libs/postgres_backend",
+    "libs/pq_proto",
+    "libs/tenant_size_model",
+    "libs/metrics",
+    "libs/postgres_connection",
+    "libs/remote_storage",
+    "libs/tracing-utils",
+    "libs/postgres_ffi/wal_craft",
+    "libs/vm_monitor",
+    "libs/walproposer",
 ]
+
+[workspace.package]
+edition = "2021"
+license = "Apache-2.0"
+
+## All dependency versions, used in the project
+[workspace.dependencies]
+anyhow = { version = "1.0", features = ["backtrace"] }
+arc-swap = "1.6"
+async-compression = { version = "0.4.0", features = ["tokio", "gzip"] }
+azure_core = "0.16"
+azure_identity = "0.16"
+azure_storage = "0.16"
+azure_storage_blobs = "0.16"
+flate2 = "1.0.26"
+async-stream = "0.3"
+async-trait = "0.1"
+aws-config = { version = "0.56", default-features = false, features=["rustls"] }
+aws-sdk-s3 = "0.29"
+aws-smithy-http = "0.56"
+aws-smithy-async = { version = "0.56", default-features = false, features=["rt-tokio"] }
+aws-credential-types = "0.56"
+aws-types = "0.56"
+axum = { version = "0.6.20", features = ["ws"] }
+base64 = "0.13.0"
+bincode = "1.3"
+bindgen = "0.65"
+bstr = "1.0"
+byteorder = "1.4"
+bytes = "1.0"
+camino = "1.1.6"
+cfg-if = "1.0.0"
+chrono = { version = "0.4", default-features = false, features = ["clock"] }
+clap = { version = "4.0", features = ["derive"] }
+close_fds = "0.3.2"
+comfy-table = "6.1"
+const_format = "0.2"
+crc32c = "0.6"
+crossbeam-utils = "0.8.5"
+dashmap = { version = "5.5.0", features = ["raw-api"] }
+either = "1.8"
+enum-map = "2.4.2"
+enumset = "1.0.12"
+fail = "0.5.0"
+fs2 = "0.4.3"
+futures = "0.3"
+futures-core = "0.3"
+futures-util = "0.3"
+git-version = "0.3"
+hashbrown = "0.13"
+hashlink = "0.8.1"
+hex = "0.4"
+hex-literal = "0.4"
+hmac = "0.12.1"
+hostname = "0.3.1"
+http-types = "2"
+humantime = "2.1"
+humantime-serde = "1.1.1"
+hyper = "0.14"
+hyper-tungstenite = "0.11"
+inotify = "0.10.2"
+itertools = "0.10"
+jsonwebtoken = "8"
+libc = "0.2"
+md5 = "0.7.0"
+memoffset = "0.8"
+native-tls = "0.2"
+nix = "0.26"
+notify = "5.0.0"
+num_cpus = "1.15"
+num-traits = "0.2.15"
+once_cell = "1.13"
+opentelemetry = "0.19.0"
+opentelemetry-otlp = { version = "0.12.0", default_features=false, features = ["http-proto", "trace", "http", "reqwest-client"] }
+opentelemetry-semantic-conventions = "0.11.0"
+parking_lot = "0.12"
+pbkdf2 = { version = "0.12.1", features = ["simple", "std"] }
+pin-project-lite = "0.2"
+prometheus = {version = "0.13", default_features=false, features = ["process"]} # removes protobuf dependency
+prost = "0.11"
+rand = "0.8"
+regex = "1.4"
+reqwest = { version = "0.11", default-features = false, features = ["rustls-tls"] }
+reqwest-tracing = { version = "0.4.0", features = ["opentelemetry_0_19"] }
+reqwest-middleware = "0.2.0"
+reqwest-retry = "0.2.2"
+routerify = "3"
+rpds = "0.13"
+rustc-hash = "1.1.0"
+rustls = "0.21"
+rustls-pemfile = "1"
+rustls-split = "0.3"
+scopeguard = "1.1"
+sysinfo = "0.29.2"
+sentry = { version = "0.31", default-features = false, features = ["backtrace", "contexts", "panic", "rustls", "reqwest" ] }
+serde = { version = "1.0", features = ["derive"] }
+serde_json = "1"
+serde_with = "2.0"
+serde_assert = "0.5.0"
+sha2 = "0.10.2"
+signal-hook = "0.3"
+smallvec = "1.11"
+socket2 = "0.5"
+strum = "0.24"
+strum_macros = "0.24"
+svg_fmt = "0.4.1"
+sync_wrapper = "0.1.2"
+tar = "0.4"
+test-context = "0.1"
+thiserror = "1.0"
+tls-listener = { version = "0.7", features = ["rustls", "hyper-h1"] }
+tokio = { version = "1.17", features = ["macros"] }
+tokio-io-timeout = "1.2.0"
+tokio-postgres-rustls = "0.10.0"
+tokio-rustls = "0.24"
+tokio-stream = "0.1"
+tokio-tar = "0.3"
+tokio-util = { version = "0.7", features = ["io"] }
+toml = "0.7"
+toml_edit = "0.19"
+tonic = {version = "0.9", features = ["tls", "tls-roots"]}
+tracing = "0.1"
+tracing-error = "0.2.0"
+tracing-opentelemetry = "0.19.0"
+tracing-subscriber = { version = "0.3", default_features = false, features = ["smallvec", "fmt", "tracing-log", "std", "env-filter", "json"] }
+url = "2.2"
+uuid = { version = "1.2", features = ["v4", "serde"] }
+walkdir = "2.3.2"
+webpki-roots = "0.25"
+x509-parser = "0.15"
+
+## TODO replace this with tracing
+env_logger = "0.10"
+log = "0.4"
+
+## Libraries from neondatabase/ git forks, ideally with changes to be upstreamed
+postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="ce7260db5998fe27167da42503905a12e7ad9048" }
+postgres-native-tls = { git = "https://github.com/neondatabase/rust-postgres.git", rev="ce7260db5998fe27167da42503905a12e7ad9048" }
+postgres-protocol = { git = "https://github.com/neondatabase/rust-postgres.git", rev="ce7260db5998fe27167da42503905a12e7ad9048" }
+postgres-types = { git = "https://github.com/neondatabase/rust-postgres.git", rev="ce7260db5998fe27167da42503905a12e7ad9048" }
+tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="ce7260db5998fe27167da42503905a12e7ad9048" }
+
+## Other git libraries
+heapless = { default-features=false, features=[], git = "https://github.com/japaric/heapless.git", rev = "644653bf3b831c6bb4963be2de24804acf5e5001" } # upstream release pending
+
+## Local libraries
+compute_api = { version = "0.1", path = "./libs/compute_api/" }
+consumption_metrics = { version = "0.1", path = "./libs/consumption_metrics/" }
+metrics = { version = "0.1", path = "./libs/metrics/" }
+pageserver_api = { version = "0.1", path = "./libs/pageserver_api/" }
+postgres_backend = { version = "0.1", path = "./libs/postgres_backend/" }
+postgres_connection = { version = "0.1", path = "./libs/postgres_connection/" }
+postgres_ffi = { version = "0.1", path = "./libs/postgres_ffi/" }
+pq_proto = { version = "0.1", path = "./libs/pq_proto/" }
+remote_storage = { version = "0.1", path = "./libs/remote_storage/" }
+safekeeper_api = { version = "0.1", path = "./libs/safekeeper_api" }
+storage_broker = { version = "0.1", path = "./storage_broker/" } # Note: main broker code is inside the binary crate, so linking with the library shouldn't be heavy.
+tenant_size_model = { version = "0.1", path = "./libs/tenant_size_model/" }
+tracing-utils = { version = "0.1", path = "./libs/tracing-utils/" }
+utils = { version = "0.1", path = "./libs/utils/" }
+vm_monitor = { version = "0.1", path = "./libs/vm_monitor/" }
+walproposer = { version = "0.1", path = "./libs/walproposer/" }
+
+## Common library dependency
+workspace_hack = { version = "0.1", path = "./workspace_hack/" }
+
+## Build dependencies
+criterion = "0.5.1"
+rcgen = "0.11"
+rstest = "0.18"
+camino-tempfile = "1.0.2"
+tonic-build = "0.9"
+
+[patch.crates-io]
+
+# This is only needed for proxy's tests.
+# TODO: we should probably fork `tokio-postgres-rustls` instead.
+tokio-postgres = { git = "https://github.com/neondatabase/rust-postgres.git", rev="ce7260db5998fe27167da42503905a12e7ad9048" }
+
+################# Binary contents sections
+
+[profile.release]
+# This is useful for profiling and, to some extent, debug.
+# Besides, debug info should not affect the performance.
+debug = true
+
+# disable debug symbols for all packages except this one to decrease binaries size
+[profile.release.package."*"]
+debug = false
+
+[profile.release-line-debug]
+inherits = "release"
+debug = 1 # true = 2 = all symbols, 1 = line only
+[profile.release-line-debug-lto]
+inherits = "release"
+debug = 1 # true = 2 = all symbols, 1 = line only
+lto = true
+
+[profile.release-line-debug-size]
+inherits = "release"
+debug = 1 # true = 2 = all symbols, 1 = line only
+opt-level = "s"
+[profile.release-line-debug-zize]
+inherits = "release"
+debug = 1 # true = 2 = all symbols, 1 = line only
+opt-level = "z"
+[profile.release-line-debug-size-lto]
+inherits = "release"
+debug = 1 # true = 2 = all symbols, 1 = line only
+opt-level = "s"
+lto = true
+[profile.release-line-debug-zize-lto]
+inherits = "release"
+debug = 1 # true = 2 = all symbols, 1 = line only
+opt-level = "z"
+lto = true
+
+[profile.release-no-debug]
+inherits = "release"
+debug = false # true = 2 = all symbols, 1 = line only
+
+[profile.release-no-debug-size]
+inherits = "release"
+debug = false # true = 2 = all symbols, 1 = line only
+opt-level = "s"
+[profile.release-no-debug-zize]
+inherits = "release"
+debug = false # true = 2 = all symbols, 1 = line only
+opt-level = "z"
+
+[profile.release-no-debug-size-lto]
+inherits = "release"
+debug = false # true = 2 = all symbols, 1 = line only
+opt-level = "s"
+lto = true
+
+[profile.release-no-debug-zize-lto]
+inherits = "release"
+debug = false # true = 2 = all symbols, 1 = line only
+opt-level = "z"
+lto = true

Dockerfile

@@ -0,0 +1,104 @@
+### Creates a storage Docker image with postgres, pageserver, safekeeper and proxy binaries.
+### The image itself is mainly used as a container for the binaries and for starting e2e tests with custom parameters.
+### By default, the binaries inside the image have some mock parameters and can start, but are not intended to be used
+### inside this image in the real deployments.
+ARG REPOSITORY=neondatabase
+ARG IMAGE=rust
+ARG TAG=pinned
+
+# Build Postgres
+FROM $REPOSITORY/$IMAGE:$TAG AS pg-build
+WORKDIR /home/nonroot
+
+COPY --chown=nonroot vendor/postgres-v14 vendor/postgres-v14
+COPY --chown=nonroot vendor/postgres-v15 vendor/postgres-v15
+COPY --chown=nonroot vendor/postgres-v16 vendor/postgres-v16
+COPY --chown=nonroot pgxn pgxn
+COPY --chown=nonroot Makefile Makefile
+COPY --chown=nonroot scripts/ninstall.sh scripts/ninstall.sh
+
+ENV BUILD_TYPE release
+RUN set -e \
+    && mold -run make -j $(nproc) -s neon-pg-ext \
+    && rm -rf pg_install/build \
+    && tar -C pg_install -czf /home/nonroot/postgres_install.tar.gz .
+
+# Build neon binaries
+FROM $REPOSITORY/$IMAGE:$TAG AS build
+WORKDIR /home/nonroot
+ARG GIT_VERSION=local
+ARG BUILD_TAG
+
+# Enable https://github.com/paritytech/cachepot to cache Rust crates' compilation results in Docker builds.
+# Set up cachepot to use an AWS S3 bucket for cache results, to reuse it between `docker build` invocations.
+# cachepot falls back to local filesystem if S3 is misconfigured, not failing the build
+ARG RUSTC_WRAPPER=cachepot
+ENV AWS_REGION=eu-central-1
+ENV CACHEPOT_S3_KEY_PREFIX=cachepot
+ARG CACHEPOT_BUCKET=neon-github-dev
+#ARG AWS_ACCESS_KEY_ID
+#ARG AWS_SECRET_ACCESS_KEY
+
+COPY --from=pg-build /home/nonroot/pg_install/v14/include/postgresql/server pg_install/v14/include/postgresql/server
+COPY --from=pg-build /home/nonroot/pg_install/v15/include/postgresql/server pg_install/v15/include/postgresql/server
+COPY --from=pg-build /home/nonroot/pg_install/v16/include/postgresql/server pg_install/v16/include/postgresql/server
+COPY --chown=nonroot . .
+
+# Show build caching stats to check if it was used in the end.
+# Has to be the part of the same RUN since cachepot daemon is killed in the end of this RUN, losing the compilation stats.
+RUN set -e \
+    && mold -run cargo build  \
+      --bin pg_sni_router  \
+      --bin pageserver  \
+      --bin pagectl  \
+      --bin safekeeper  \
+      --bin storage_broker  \
+      --bin proxy  \
+      --bin neon_local \
+      --locked --release \
+    && cachepot -s
+
+# Build final image
+#
+FROM debian:bullseye-slim
+WORKDIR /data
+
+RUN set -e \
+    && apt update \
+    && apt install -y \
+        libreadline-dev \
+        libseccomp-dev \
+        libicu67 \
+        openssl \
+        ca-certificates \
+    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* \
+    && useradd -d /data neon \
+    && chown -R neon:neon /data
+
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/pg_sni_router       /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/pageserver          /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/pagectl             /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/safekeeper          /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/storage_broker      /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/proxy               /usr/local/bin
+COPY --from=build --chown=neon:neon /home/nonroot/target/release/neon_local          /usr/local/bin
+
+COPY --from=pg-build /home/nonroot/pg_install/v14 /usr/local/v14/
+COPY --from=pg-build /home/nonroot/pg_install/v15 /usr/local/v15/
+COPY --from=pg-build /home/nonroot/pg_install/v16 /usr/local/v16/
+COPY --from=pg-build /home/nonroot/postgres_install.tar.gz /data/
+
+# By default, pageserver uses `.neon/` working directory in WORKDIR, so create one and fill it with the dummy config.
+# Now, when `docker run ... pageserver` is run, it can start without errors, yet will have some default dummy values.
+RUN mkdir -p /data/.neon/ && chown -R neon:neon /data/.neon/ \
+    && /usr/local/bin/pageserver -D /data/.neon/ --init \
+       -c "id=1234" \
+       -c "broker_endpoint='http://storage_broker:50051'" \
+       -c "pg_distrib_dir='/usr/local/'" \
+       -c "listen_pg_addr='0.0.0.0:6400'" \
+       -c "listen_http_addr='0.0.0.0:9898'"
+
+VOLUME ["/data"]
+USER neon
+EXPOSE 6400
+EXPOSE 9898

Dockerfile.compute-node

@@ -0,0 +1,875 @@
+ARG PG_VERSION
+ARG REPOSITORY=neondatabase
+ARG IMAGE=rust
+ARG TAG=pinned
+ARG BUILD_TAG
+
+#########################################################################################
+#
+# Layer "build-deps"
+#
+#########################################################################################
+FROM debian:bullseye-slim AS build-deps
+RUN apt update &&  \
+    apt install -y git autoconf automake libtool build-essential bison flex libreadline-dev \
+    zlib1g-dev libxml2-dev libcurl4-openssl-dev libossp-uuid-dev wget pkg-config libssl-dev \
+    libicu-dev libxslt1-dev liblz4-dev libzstd-dev zstd
+
+#########################################################################################
+#
+# Layer "pg-build"
+# Build Postgres from the neon postgres repository.
+#
+#########################################################################################
+FROM build-deps AS pg-build
+ARG PG_VERSION
+COPY vendor/postgres-${PG_VERSION} postgres
+RUN cd postgres && \
+    export CONFIGURE_CMD="./configure CFLAGS='-O2 -g3' --enable-debug --with-openssl --with-uuid=ossp \
+    --with-icu --with-libxml --with-libxslt --with-lz4" && \
+    if [ "${PG_VERSION}" != "v14" ]; then \
+        # zstd is available only from PG15
+        export CONFIGURE_CMD="${CONFIGURE_CMD} --with-zstd"; \
+    fi && \
+    eval $CONFIGURE_CMD && \
+    make MAKELEVEL=0 -j $(getconf _NPROCESSORS_ONLN) -s install && \
+    make MAKELEVEL=0 -j $(getconf _NPROCESSORS_ONLN) -s -C contrib/ install && \
+    # Install headers
+    make MAKELEVEL=0 -j $(getconf _NPROCESSORS_ONLN) -s -C src/include install && \
+    make MAKELEVEL=0 -j $(getconf _NPROCESSORS_ONLN) -s -C src/interfaces/libpq install && \
+    # Enable some of contrib extensions
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/autoinc.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/bloom.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/earthdistance.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/insert_username.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/intagg.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/moddatetime.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_stat_statements.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgrowlocks.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgstattuple.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/refint.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/xml2.control
+
+#########################################################################################
+#
+# Layer "postgis-build"
+# Build PostGIS from the upstream PostGIS mirror.
+#
+#########################################################################################
+FROM build-deps AS postgis-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+RUN apt update && \
+    apt install -y cmake gdal-bin libboost-dev libboost-thread-dev libboost-filesystem-dev \
+    libboost-system-dev libboost-iostreams-dev libboost-program-options-dev libboost-timer-dev \
+    libcgal-dev libgdal-dev libgmp-dev libmpfr-dev libopenscenegraph-dev libprotobuf-c-dev \
+    protobuf-c-compiler xsltproc
+
+# SFCGAL > 1.3 requires CGAL > 5.2, Bullseye's libcgal-dev is 5.2
+RUN wget https://gitlab.com/Oslandia/SFCGAL/-/archive/v1.3.10/SFCGAL-v1.3.10.tar.gz -O SFCGAL.tar.gz && \
+    echo "4e39b3b2adada6254a7bdba6d297bb28e1a9835a9f879b74f37e2dab70203232 SFCGAL.tar.gz" | sha256sum --check && \
+    mkdir sfcgal-src && cd sfcgal-src && tar xvzf ../SFCGAL.tar.gz --strip-components=1 -C . && \
+    cmake -DCMAKE_BUILD_TYPE=Release . && make -j $(getconf _NPROCESSORS_ONLN) && \
+    DESTDIR=/sfcgal make install -j $(getconf _NPROCESSORS_ONLN) && \
+    make clean && cp -R /sfcgal/* /
+
+ENV PATH "/usr/local/pgsql/bin:$PATH"
+
+RUN wget https://download.osgeo.org/postgis/source/postgis-3.3.3.tar.gz -O postgis.tar.gz && \
+    echo "74eb356e3f85f14233791013360881b6748f78081cc688ff9d6f0f673a762d13 postgis.tar.gz" | sha256sum --check && \
+    mkdir postgis-src && cd postgis-src && tar xvzf ../postgis.tar.gz --strip-components=1 -C . && \
+    find /usr/local/pgsql -type f | sed 's|^/usr/local/pgsql/||' > /before.txt &&\
+    ./autogen.sh && \
+    ./configure --with-sfcgal=/usr/local/bin/sfcgal-config && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    cd extensions/postgis && \
+    make clean && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis_raster.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis_sfcgal.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis_tiger_geocoder.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/postgis_topology.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/address_standardizer.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/address_standardizer_data_us.control && \
+    mkdir -p /extensions/postgis && \
+    cp /usr/local/pgsql/share/extension/postgis.control /extensions/postgis && \
+    cp /usr/local/pgsql/share/extension/postgis_raster.control /extensions/postgis && \
+    cp /usr/local/pgsql/share/extension/postgis_sfcgal.control /extensions/postgis && \
+    cp /usr/local/pgsql/share/extension/postgis_tiger_geocoder.control /extensions/postgis && \
+    cp /usr/local/pgsql/share/extension/postgis_topology.control /extensions/postgis && \
+    cp /usr/local/pgsql/share/extension/address_standardizer.control /extensions/postgis && \
+    cp /usr/local/pgsql/share/extension/address_standardizer_data_us.control /extensions/postgis
+
+RUN wget https://github.com/pgRouting/pgrouting/archive/v3.4.2.tar.gz -O pgrouting.tar.gz && \
+    echo "cac297c07d34460887c4f3b522b35c470138760fe358e351ad1db4edb6ee306e pgrouting.tar.gz" | sha256sum --check && \
+    mkdir pgrouting-src && cd pgrouting-src && tar xvzf ../pgrouting.tar.gz --strip-components=1 -C . && \
+    mkdir build && cd build && \
+    cmake -DCMAKE_BUILD_TYPE=Release .. && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgrouting.control && \
+    find /usr/local/pgsql -type f | sed 's|^/usr/local/pgsql/||' > /after.txt &&\
+    cp /usr/local/pgsql/share/extension/pgrouting.control /extensions/postgis && \
+    sort -o /before.txt /before.txt && sort -o /after.txt /after.txt && \
+    comm -13 /before.txt /after.txt | tar --directory=/usr/local/pgsql --zstd -cf /extensions/postgis.tar.zst -T -
+
+#########################################################################################
+#
+# Layer "plv8-build"
+# Build plv8
+#
+#########################################################################################
+FROM build-deps AS plv8-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+RUN apt update && \
+    apt install -y ninja-build python3-dev libncurses5 binutils clang
+
+RUN case "${PG_VERSION}" in \
+      "v14" | "v15") \
+        export PLV8_VERSION=3.1.5 \
+        export PLV8_CHECKSUM=1e108d5df639e4c189e1c5bdfa2432a521c126ca89e7e5a969d46899ca7bf106 \
+        ;; \
+      "v16") \
+        export PLV8_VERSION=3.1.8 \
+        export PLV8_CHECKSUM=92b10c7db39afdae97ff748c9ec54713826af222c459084ad002571b79eb3f49 \
+        ;; \
+      *) \
+        echo "Export the valid PG_VERSION variable" && exit 1 \
+        ;; \
+    esac && \
+    wget https://github.com/plv8/plv8/archive/refs/tags/v${PLV8_VERSION}.tar.gz -O plv8.tar.gz && \
+    echo "${PLV8_CHECKSUM} plv8.tar.gz" | sha256sum --check && \
+    mkdir plv8-src && cd plv8-src && tar xvzf ../plv8.tar.gz --strip-components=1 -C . && \
+    export PATH="/usr/local/pgsql/bin:$PATH" && \
+    make DOCKER=1 -j $(getconf _NPROCESSORS_ONLN) install && \
+    rm -rf /plv8-* && \
+    find /usr/local/pgsql/ -name "plv8-*.so" | xargs strip && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/plv8.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/plcoffee.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/plls.control
+
+#########################################################################################
+#
+# Layer "h3-pg-build"
+# Build h3_pg
+#
+#########################################################################################
+FROM build-deps AS h3-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN case "$(uname -m)" in \
+      "x86_64") \
+        export CMAKE_CHECKSUM=739d372726cb23129d57a539ce1432453448816e345e1545f6127296926b6754 \
+        ;; \
+      "aarch64") \
+        export CMAKE_CHECKSUM=281b42627c9a1beed03e29706574d04c6c53fae4994472e90985ef018dd29c02 \
+        ;; \
+      *) \
+        echo "Unsupported architecture '$(uname -m)'. Supported are x86_64 and aarch64" && exit 1 \
+        ;; \
+    esac && \
+    wget https://github.com/Kitware/CMake/releases/download/v3.24.2/cmake-3.24.2-linux-$(uname -m).sh \
+      -q -O /tmp/cmake-install.sh \
+      && echo "${CMAKE_CHECKSUM} /tmp/cmake-install.sh" | sha256sum --check \
+      && chmod u+x /tmp/cmake-install.sh \
+      && /tmp/cmake-install.sh --skip-license --prefix=/usr/local/ \
+      && rm /tmp/cmake-install.sh
+
+RUN wget https://github.com/uber/h3/archive/refs/tags/v4.1.0.tar.gz -O h3.tar.gz && \
+    echo "ec99f1f5974846bde64f4513cf8d2ea1b8d172d2218ab41803bf6a63532272bc h3.tar.gz" | sha256sum --check && \
+    mkdir h3-src && cd h3-src && tar xvzf ../h3.tar.gz --strip-components=1 -C . && \
+    mkdir build && cd build && \
+    cmake .. -DCMAKE_BUILD_TYPE=Release && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    DESTDIR=/h3 make install && \
+    cp -R /h3/usr / && \
+    rm -rf build
+
+RUN wget https://github.com/zachasme/h3-pg/archive/refs/tags/v4.1.3.tar.gz -O h3-pg.tar.gz && \
+    echo "5c17f09a820859ffe949f847bebf1be98511fb8f1bd86f94932512c00479e324 h3-pg.tar.gz" | sha256sum --check && \
+    mkdir h3-pg-src && cd h3-pg-src && tar xvzf ../h3-pg.tar.gz --strip-components=1 -C . && \
+    export PATH="/usr/local/pgsql/bin:$PATH" && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/h3.control && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/h3_postgis.control
+
+#########################################################################################
+#
+# Layer "unit-pg-build"
+# compile unit extension
+#
+#########################################################################################
+FROM build-deps AS unit-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/df7cb/postgresql-unit/archive/refs/tags/7.7.tar.gz -O postgresql-unit.tar.gz && \
+    echo "411d05beeb97e5a4abf17572bfcfbb5a68d98d1018918feff995f6ee3bb03e79 postgresql-unit.tar.gz" | sha256sum --check && \
+    mkdir postgresql-unit-src && cd postgresql-unit-src && tar xvzf ../postgresql-unit.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    # unit extension's "create extension" script relies on absolute install path to fill some reference tables.
+    # We move the extension from '/usr/local/pgsql/' to '/usr/local/'  after it is build. So we need to adjust the path.
+    # This one-liner removes pgsql/ part of the path.
+    # NOTE: Other extensions that rely on MODULEDIR variable after building phase will need the same fix.
+    find /usr/local/pgsql/share/extension/ -name "unit*.sql" -print0 | xargs -0 sed -i "s|pgsql/||g" && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/unit.control
+
+#########################################################################################
+#
+# Layer "vector-pg-build"
+# compile pgvector extension
+#
+#########################################################################################
+FROM build-deps AS vector-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/pgvector/pgvector/archive/refs/tags/v0.5.1.tar.gz -O pgvector.tar.gz && \
+    echo "cc7a8e034a96e30a819911ac79d32f6bc47bdd1aa2de4d7d4904e26b83209dc8 pgvector.tar.gz" | sha256sum --check && \
+    mkdir pgvector-src && cd pgvector-src && tar xvzf ../pgvector.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/vector.control
+
+#########################################################################################
+#
+# Layer "pgjwt-pg-build"
+# compile pgjwt extension
+#
+#########################################################################################
+FROM build-deps AS pgjwt-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+# 9742dab1b2f297ad3811120db7b21451bca2d3c9 made on 13/11/2021
+RUN wget https://github.com/michelp/pgjwt/archive/9742dab1b2f297ad3811120db7b21451bca2d3c9.tar.gz -O pgjwt.tar.gz && \
+    echo "cfdefb15007286f67d3d45510f04a6a7a495004be5b3aecb12cda667e774203f pgjwt.tar.gz" | sha256sum --check && \
+    mkdir pgjwt-src && cd pgjwt-src && tar xvzf ../pgjwt.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgjwt.control
+
+#########################################################################################
+#
+# Layer "hypopg-pg-build"
+# compile hypopg extension
+#
+#########################################################################################
+FROM build-deps AS hypopg-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/HypoPG/hypopg/archive/refs/tags/1.4.0.tar.gz -O hypopg.tar.gz && \
+    echo "0821011743083226fc9b813c1f2ef5897a91901b57b6bea85a78e466187c6819 hypopg.tar.gz" | sha256sum --check && \
+    mkdir hypopg-src && cd hypopg-src && tar xvzf ../hypopg.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/hypopg.control
+
+#########################################################################################
+#
+# Layer "pg-hashids-pg-build"
+# compile pg_hashids extension
+#
+#########################################################################################
+FROM build-deps AS pg-hashids-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/iCyberon/pg_hashids/archive/refs/tags/v1.2.1.tar.gz -O pg_hashids.tar.gz && \
+    echo "74576b992d9277c92196dd8d816baa2cc2d8046fe102f3dcd7f3c3febed6822a pg_hashids.tar.gz" | sha256sum --check && \
+    mkdir pg_hashids-src && cd pg_hashids-src && tar xvzf ../pg_hashids.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_hashids.control
+
+#########################################################################################
+#
+# Layer "rum-pg-build"
+# compile rum extension
+#
+#########################################################################################
+FROM build-deps AS rum-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/postgrespro/rum/archive/refs/tags/1.3.13.tar.gz -O rum.tar.gz && \
+    echo "6ab370532c965568df6210bd844ac6ba649f53055e48243525b0b7e5c4d69a7d rum.tar.gz" | sha256sum --check && \
+    mkdir rum-src && cd rum-src && tar xvzf ../rum.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/rum.control
+
+#########################################################################################
+#
+# Layer "pgtap-pg-build"
+# compile pgTAP extension
+#
+#########################################################################################
+FROM build-deps AS pgtap-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/theory/pgtap/archive/refs/tags/v1.2.0.tar.gz -O pgtap.tar.gz && \
+    echo "9c7c3de67ea41638e14f06da5da57bac6f5bd03fea05c165a0ec862205a5c052 pgtap.tar.gz" | sha256sum --check && \
+    mkdir pgtap-src && cd pgtap-src && tar xvzf ../pgtap.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pgtap.control
+
+#########################################################################################
+#
+# Layer "ip4r-pg-build"
+# compile ip4r extension
+#
+#########################################################################################
+FROM build-deps AS ip4r-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/RhodiumToad/ip4r/archive/refs/tags/2.4.2.tar.gz -O ip4r.tar.gz && \
+    echo "0f7b1f159974f49a47842a8ab6751aecca1ed1142b6d5e38d81b064b2ead1b4b ip4r.tar.gz" | sha256sum --check && \
+    mkdir ip4r-src && cd ip4r-src && tar xvzf ../ip4r.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/ip4r.control
+
+#########################################################################################
+#
+# Layer "prefix-pg-build"
+# compile Prefix extension
+#
+#########################################################################################
+FROM build-deps AS prefix-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/dimitri/prefix/archive/refs/tags/v1.2.10.tar.gz -O prefix.tar.gz && \
+    echo "4342f251432a5f6fb05b8597139d3ccde8dcf87e8ca1498e7ee931ca057a8575 prefix.tar.gz" | sha256sum --check && \
+    mkdir prefix-src && cd prefix-src && tar xvzf ../prefix.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/prefix.control
+
+#########################################################################################
+#
+# Layer "hll-pg-build"
+# compile hll extension
+#
+#########################################################################################
+FROM build-deps AS hll-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/citusdata/postgresql-hll/archive/refs/tags/v2.18.tar.gz -O hll.tar.gz && \
+    echo "e2f55a6f4c4ab95ee4f1b4a2b73280258c5136b161fe9d059559556079694f0e hll.tar.gz" | sha256sum --check && \
+    mkdir hll-src && cd hll-src && tar xvzf ../hll.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/hll.control
+
+#########################################################################################
+#
+# Layer "plpgsql-check-pg-build"
+# compile plpgsql_check extension
+#
+#########################################################################################
+FROM build-deps AS plpgsql-check-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN wget https://github.com/okbob/plpgsql_check/archive/refs/tags/v2.5.3.tar.gz -O plpgsql_check.tar.gz && \
+    echo "6631ec3e7fb3769eaaf56e3dfedb829aa761abf163d13dba354b4c218508e1c0 plpgsql_check.tar.gz" | sha256sum --check && \
+    mkdir plpgsql_check-src && cd plpgsql_check-src && tar xvzf ../plpgsql_check.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config USE_PGXS=1 && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/plpgsql_check.control
+
+#########################################################################################
+#
+# Layer "timescaledb-pg-build"
+# compile timescaledb extension
+#
+#########################################################################################
+FROM build-deps AS timescaledb-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+ARG PG_VERSION
+ENV PATH "/usr/local/pgsql/bin:$PATH"
+
+RUN case "${PG_VERSION}" in \
+      "v14" | "v15") \
+        export TIMESCALEDB_VERSION=2.10.1 \
+        export TIMESCALEDB_CHECKSUM=6fca72a6ed0f6d32d2b3523951ede73dc5f9b0077b38450a029a5f411fdb8c73 \
+        ;; \
+      *) \
+        echo "TimescaleDB not supported on this PostgreSQL version. See https://github.com/timescale/timescaledb/issues/5752" && exit 0;; \
+    esac && \
+    apt-get update && \
+    apt-get install -y cmake && \
+    wget https://github.com/timescale/timescaledb/archive/refs/tags/${TIMESCALEDB_VERSION}.tar.gz -O timescaledb.tar.gz && \
+    echo "${TIMESCALEDB_CHECKSUM} timescaledb.tar.gz" | sha256sum --check && \
+    mkdir timescaledb-src && cd timescaledb-src && tar xvzf ../timescaledb.tar.gz --strip-components=1 -C . && \
+    ./bootstrap -DSEND_TELEMETRY_DEFAULT:BOOL=OFF -DUSE_TELEMETRY:BOOL=OFF -DAPACHE_ONLY:BOOL=ON -DCMAKE_BUILD_TYPE=Release && \
+    cd build && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make install -j $(getconf _NPROCESSORS_ONLN) && \
+    echo "trusted = true" >> /usr/local/pgsql/share/extension/timescaledb.control
+
+#########################################################################################
+#
+# Layer "pg-hint-plan-pg-build"
+# compile pg_hint_plan extension
+#
+#########################################################################################
+FROM build-deps AS pg-hint-plan-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+ARG PG_VERSION
+ENV PATH "/usr/local/pgsql/bin:$PATH"
+
+RUN case "${PG_VERSION}" in \
+      "v14") \
+        export PG_HINT_PLAN_VERSION=14_1_4_1 \
+        export PG_HINT_PLAN_CHECKSUM=c3501becf70ead27f70626bce80ea401ceac6a77e2083ee5f3ff1f1444ec1ad1 \
+        ;; \
+      "v15") \
+        export PG_HINT_PLAN_VERSION=15_1_5_0 \
+        export PG_HINT_PLAN_CHECKSUM=564cbbf4820973ffece63fbf76e3c0af62c4ab23543142c7caaa682bc48918be \
+        ;; \
+      "v16") \
+        export PG_HINT_PLAN_VERSION=16_1_6_0 \
+        export PG_HINT_PLAN_CHECKSUM=fc85a9212e7d2819d4ae4ac75817481101833c3cfa9f0fe1f980984e12347d00 \
+        ;; \
+      *) \
+        echo "Export the valid PG_HINT_PLAN_VERSION variable" && exit 1 \
+        ;; \
+    esac && \
+    wget https://github.com/ossc-db/pg_hint_plan/archive/refs/tags/REL${PG_HINT_PLAN_VERSION}.tar.gz -O pg_hint_plan.tar.gz && \
+    echo "${PG_HINT_PLAN_CHECKSUM} pg_hint_plan.tar.gz" | sha256sum --check && \
+    mkdir pg_hint_plan-src && cd pg_hint_plan-src && tar xvzf ../pg_hint_plan.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make install -j $(getconf _NPROCESSORS_ONLN) && \
+    echo "trusted = true" >> /usr/local/pgsql/share/extension/pg_hint_plan.control
+
+#########################################################################################
+#
+# Layer "kq-imcx-pg-build"
+# compile kq_imcx extension
+#
+#########################################################################################
+FROM build-deps AS kq-imcx-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+ENV PATH "/usr/local/pgsql/bin/:$PATH"
+RUN apt-get update && \
+    apt-get install -y git libgtk2.0-dev libpq-dev libpam-dev libxslt-dev libkrb5-dev cmake && \
+    wget https://github.com/ketteq-neon/postgres-exts/archive/e0bd1a9d9313d7120c1b9c7bb15c48c0dede4c4e.tar.gz -O kq_imcx.tar.gz && \
+    echo "dc93a97ff32d152d32737ba7e196d9687041cda15e58ab31344c2f2de8855336 kq_imcx.tar.gz" | sha256sum --check && \
+    mkdir kq_imcx-src && cd kq_imcx-src && tar xvzf ../kq_imcx.tar.gz --strip-components=1 -C . && \
+    find /usr/local/pgsql -type f | sed 's|^/usr/local/pgsql/||' > /before.txt &&\
+    mkdir build && cd build && \
+    cmake -DCMAKE_BUILD_TYPE=Release .. && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/kq_imcx.control && \
+    find /usr/local/pgsql -type f | sed 's|^/usr/local/pgsql/||' > /after.txt &&\
+    mkdir -p /extensions/kq_imcx && cp /usr/local/pgsql/share/extension/kq_imcx.control /extensions/kq_imcx && \
+    sort -o /before.txt /before.txt && sort -o /after.txt /after.txt && \
+    comm -13 /before.txt /after.txt | tar --directory=/usr/local/pgsql --zstd -cf /extensions/kq_imcx.tar.zst -T -
+
+#########################################################################################
+#
+# Layer "pg-cron-pg-build"
+# compile pg_cron extension
+#
+#########################################################################################
+FROM build-deps AS pg-cron-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+ENV PATH "/usr/local/pgsql/bin/:$PATH"
+RUN wget https://github.com/citusdata/pg_cron/archive/refs/tags/v1.6.0.tar.gz -O pg_cron.tar.gz && \
+    echo "383a627867d730222c272bfd25cd5e151c578d73f696d32910c7db8c665cc7db pg_cron.tar.gz" | sha256sum --check && \
+    mkdir pg_cron-src && cd pg_cron-src && tar xvzf ../pg_cron.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_cron.control
+
+#########################################################################################
+#
+# Layer "rdkit-pg-build"
+# compile rdkit extension
+#
+#########################################################################################
+FROM build-deps AS rdkit-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN apt-get update && \
+    apt-get install -y \
+        cmake \
+        libboost-iostreams1.74-dev \
+        libboost-regex1.74-dev \
+        libboost-serialization1.74-dev \
+        libboost-system1.74-dev \
+        libeigen3-dev \
+        libfreetype6-dev
+
+ENV PATH "/usr/local/pgsql/bin/:/usr/local/pgsql/:$PATH"
+RUN wget https://github.com/rdkit/rdkit/archive/refs/tags/Release_2023_03_3.tar.gz -O rdkit.tar.gz && \
+    echo "bdbf9a2e6988526bfeb8c56ce3cdfe2998d60ac289078e2215374288185e8c8d rdkit.tar.gz" | sha256sum --check && \
+    mkdir rdkit-src && cd rdkit-src && tar xvzf ../rdkit.tar.gz --strip-components=1 -C . && \
+    cmake \
+        -D RDK_BUILD_CAIRO_SUPPORT=OFF \
+        -D RDK_BUILD_INCHI_SUPPORT=ON \
+        -D RDK_BUILD_AVALON_SUPPORT=ON \
+        -D RDK_BUILD_PYTHON_WRAPPERS=OFF \
+        -D RDK_BUILD_DESCRIPTORS3D=OFF \
+        -D RDK_BUILD_FREESASA_SUPPORT=OFF \
+        -D RDK_BUILD_COORDGEN_SUPPORT=ON \
+        -D RDK_BUILD_MOLINTERCHANGE_SUPPORT=OFF \
+        -D RDK_BUILD_YAEHMOP_SUPPORT=OFF \
+        -D RDK_BUILD_STRUCTCHECKER_SUPPORT=OFF \
+        -D RDK_USE_URF=OFF \
+        -D RDK_BUILD_PGSQL=ON \
+        -D RDK_PGSQL_STATIC=ON \
+        -D PostgreSQL_CONFIG=pg_config \
+        -D PostgreSQL_INCLUDE_DIR=`pg_config --includedir` \
+        -D PostgreSQL_TYPE_INCLUDE_DIR=`pg_config --includedir-server` \
+        -D PostgreSQL_LIBRARY_DIR=`pg_config --libdir` \
+        -D RDK_INSTALL_INTREE=OFF \
+        -D CMAKE_BUILD_TYPE=Release \
+        . && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/rdkit.control
+
+#########################################################################################
+#
+# Layer "pg-uuidv7-pg-build"
+# compile pg_uuidv7 extension
+#
+#########################################################################################
+FROM build-deps AS pg-uuidv7-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+ENV PATH "/usr/local/pgsql/bin/:$PATH"
+RUN wget https://github.com/fboulnois/pg_uuidv7/archive/refs/tags/v1.0.1.tar.gz -O pg_uuidv7.tar.gz && \
+    echo "0d0759ab01b7fb23851ecffb0bce27822e1868a4a5819bfd276101c716637a7a pg_uuidv7.tar.gz" | sha256sum --check && \
+    mkdir pg_uuidv7-src && cd pg_uuidv7-src && tar xvzf ../pg_uuidv7.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/pg_uuidv7.control
+
+#########################################################################################
+#
+# Layer "pg-roaringbitmap-pg-build"
+# compile pg_roaringbitmap extension
+#
+#########################################################################################
+FROM build-deps AS pg-roaringbitmap-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+ENV PATH "/usr/local/pgsql/bin/:$PATH"
+RUN wget https://github.com/ChenHuajun/pg_roaringbitmap/archive/refs/tags/v0.5.4.tar.gz -O pg_roaringbitmap.tar.gz && \
+    echo "b75201efcb1c2d1b014ec4ae6a22769cc7a224e6e406a587f5784a37b6b5a2aa pg_roaringbitmap.tar.gz" | sha256sum --check && \
+    mkdir pg_roaringbitmap-src && cd pg_roaringbitmap-src && tar xvzf ../pg_roaringbitmap.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make -j $(getconf _NPROCESSORS_ONLN) install && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/roaringbitmap.control
+
+#########################################################################################
+#
+# Layer "pg-embedding-pg-build"
+# compile pg_embedding extension
+#
+#########################################################################################
+FROM build-deps AS pg-embedding-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+ENV PATH "/usr/local/pgsql/bin/:$PATH"
+RUN case "${PG_VERSION}" in \
+      "v14" | "v15") \
+        export PG_EMBEDDING_VERSION=0.3.5 \
+        export PG_EMBEDDING_CHECKSUM=0e95b27b8b6196e2cf0a0c9ec143fe2219b82e54c5bb4ee064e76398cbe69ae9 \
+        ;; \
+      *) \
+        echo "pg_embedding not supported on this PostgreSQL version. Use pgvector instead." && exit 0;; \
+    esac && \
+    wget https://github.com/neondatabase/pg_embedding/archive/refs/tags/${PG_EMBEDDING_VERSION}.tar.gz -O pg_embedding.tar.gz && \
+    echo "${PG_EMBEDDING_CHECKSUM} pg_embedding.tar.gz" | sha256sum --check && \
+    mkdir pg_embedding-src && cd pg_embedding-src && tar xvzf ../pg_embedding.tar.gz --strip-components=1 -C . && \
+    make -j $(getconf _NPROCESSORS_ONLN) && \
+    make -j $(getconf _NPROCESSORS_ONLN) install
+
+#########################################################################################
+#
+# Layer "pg-anon-pg-build"
+# compile anon extension
+#
+#########################################################################################
+FROM build-deps AS pg-anon-pg-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+ENV PATH "/usr/local/pgsql/bin/:$PATH"
+RUN wget https://gitlab.com/dalibo/postgresql_anonymizer/-/archive/1.1.0/postgresql_anonymizer-1.1.0.tar.gz -O pg_anon.tar.gz && \
+    echo "08b09d2ff9b962f96c60db7e6f8e79cf7253eb8772516998fc35ece08633d3ad pg_anon.tar.gz" | sha256sum --check && \
+    mkdir pg_anon-src && cd pg_anon-src && tar xvzf ../pg_anon.tar.gz --strip-components=1 -C . && \
+    find /usr/local/pgsql -type f | sed 's|^/usr/local/pgsql/||' > /before.txt &&\
+    make -j $(getconf _NPROCESSORS_ONLN) install PG_CONFIG=/usr/local/pgsql/bin/pg_config && \
+    echo 'trusted = true' >> /usr/local/pgsql/share/extension/anon.control && \
+    find /usr/local/pgsql -type f | sed 's|^/usr/local/pgsql/||' > /after.txt &&\
+    mkdir -p /extensions/anon && cp /usr/local/pgsql/share/extension/anon.control /extensions/anon && \
+    sort -o /before.txt /before.txt && sort -o /after.txt /after.txt && \
+    comm -13 /before.txt /after.txt | tar --directory=/usr/local/pgsql --zstd -cf /extensions/anon.tar.zst -T -
+
+#########################################################################################
+#
+# Layer "rust extensions"
+# This layer is used to build `pgrx` deps
+#
+#########################################################################################
+FROM build-deps AS rust-extensions-build
+COPY --from=pg-build /usr/local/pgsql/ /usr/local/pgsql/
+
+RUN apt-get update && \
+    apt-get install -y curl libclang-dev cmake && \
+    useradd -ms /bin/bash nonroot -b /home
+
+ENV HOME=/home/nonroot
+ENV PATH="/home/nonroot/.cargo/bin:/usr/local/pgsql/bin/:$PATH"
+USER nonroot
+WORKDIR /home/nonroot
+ARG PG_VERSION
+
+RUN curl -sSO https://static.rust-lang.org/rustup/dist/$(uname -m)-unknown-linux-gnu/rustup-init && \
+    chmod +x rustup-init && \
+    ./rustup-init -y --no-modify-path --profile minimal --default-toolchain stable && \
+    rm rustup-init && \
+    cargo install --locked --version 0.10.2 cargo-pgrx && \
+    /bin/bash -c 'cargo pgrx init --pg${PG_VERSION:1}=/usr/local/pgsql/bin/pg_config'
+
+USER root
+
+#########################################################################################
+#
+# Layer "pg-jsonschema-pg-build"
+# Compile "pg_jsonschema" extension
+#
+#########################################################################################
+
+FROM rust-extensions-build AS pg-jsonschema-pg-build
+ARG PG_VERSION
+
+RUN wget https://github.com/supabase/pg_jsonschema/archive/refs/tags/v0.2.0.tar.gz -O pg_jsonschema.tar.gz && \
+    echo "9118fc508a6e231e7a39acaa6f066fcd79af17a5db757b47d2eefbe14f7794f0 pg_jsonschema.tar.gz" | sha256sum --check && \
+    mkdir pg_jsonschema-src && cd pg_jsonschema-src && tar xvzf ../pg_jsonschema.tar.gz --strip-components=1 -C . && \
+    sed -i 's/pgrx = "0.10.2"/pgrx = { version = "0.10.2", features = [ "unsafe-postgres" ] }/g' Cargo.toml && \
+    cargo pgrx install --release && \
+    echo "trusted = true" >> /usr/local/pgsql/share/extension/pg_jsonschema.control
+
+#########################################################################################
+#
+# Layer "pg-graphql-pg-build"
+# Compile "pg_graphql" extension
+#
+#########################################################################################
+
+FROM rust-extensions-build AS pg-graphql-pg-build
+ARG PG_VERSION
+
+RUN wget https://github.com/supabase/pg_graphql/archive/refs/tags/v1.4.0.tar.gz -O pg_graphql.tar.gz && \
+    echo "bd8dc7230282b3efa9ae5baf053a54151ed0e66881c7c53750e2d0c765776edc pg_graphql.tar.gz" | sha256sum --check && \
+    mkdir pg_graphql-src && cd pg_graphql-src && tar xvzf ../pg_graphql.tar.gz --strip-components=1 -C . && \
+    sed -i 's/pgrx = "=0.10.2"/pgrx = { version = "0.10.2", features = [ "unsafe-postgres" ] }/g' Cargo.toml && \
+    cargo pgrx install --release && \
+    # it's needed to enable extension because it uses untrusted C language
+    sed -i 's/superuser = false/superuser = true/g' /usr/local/pgsql/share/extension/pg_graphql.control && \
+    echo "trusted = true" >> /usr/local/pgsql/share/extension/pg_graphql.control
+
+#########################################################################################
+#
+# Layer "pg-tiktoken-build"
+# Compile "pg_tiktoken" extension
+#
+#########################################################################################
+
+FROM rust-extensions-build AS pg-tiktoken-pg-build
+ARG PG_VERSION
+
+# 26806147b17b60763039c6a6878884c41a262318 made on 26/09/2023
+RUN wget https://github.com/kelvich/pg_tiktoken/archive/26806147b17b60763039c6a6878884c41a262318.tar.gz -O pg_tiktoken.tar.gz && \
+    echo "e64e55aaa38c259512d3e27c572da22c4637418cf124caba904cd50944e5004e pg_tiktoken.tar.gz" | sha256sum --check && \
+    mkdir pg_tiktoken-src && cd pg_tiktoken-src && tar xvzf ../pg_tiktoken.tar.gz --strip-components=1 -C . && \
+    cargo pgrx install --release && \
+    echo "trusted = true" >> /usr/local/pgsql/share/extension/pg_tiktoken.control
+
+#########################################################################################
+#
+# Layer "pg-pgx-ulid-build"
+# Compile "pgx_ulid" extension
+#
+#########################################################################################
+
+FROM rust-extensions-build AS pg-pgx-ulid-build
+ARG PG_VERSION
+
+RUN wget https://github.com/pksunkara/pgx_ulid/archive/refs/tags/v0.1.3.tar.gz -O pgx_ulid.tar.gz && \
+    echo "ee5db82945d2d9f2d15597a80cf32de9dca67b897f605beb830561705f12683c pgx_ulid.tar.gz" | sha256sum --check && \
+    mkdir pgx_ulid-src && cd pgx_ulid-src && tar xvzf ../pgx_ulid.tar.gz --strip-components=1 -C . && \
+    echo "******************* Apply a patch for Postgres 16 support; delete in the next release ******************" && \
+    wget https://github.com/pksunkara/pgx_ulid/commit/f84954cf63fc8c80d964ac970d9eceed3c791196.patch && \
+    patch -p1 < f84954cf63fc8c80d964ac970d9eceed3c791196.patch && \
+    echo "********************************************************************************************************" && \
+    sed -i 's/pgrx       = "=0.10.2"/pgrx = { version = "=0.10.2", features = [ "unsafe-postgres" ] }/g' Cargo.toml && \
+    cargo pgrx install --release && \
+    echo "trusted = true" >> /usr/local/pgsql/share/extension/ulid.control
+
+#########################################################################################
+#
+# Layer "neon-pg-ext-build"
+# compile neon extensions
+#
+#########################################################################################
+FROM build-deps AS neon-pg-ext-build
+# Public extensions
+COPY --from=postgis-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=postgis-build /sfcgal/* /
+COPY --from=plv8-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=h3-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=h3-pg-build /h3/usr /
+COPY --from=unit-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=vector-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pgjwt-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-jsonschema-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-graphql-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-tiktoken-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=hypopg-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-hashids-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=rum-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pgtap-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=ip4r-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=prefix-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=hll-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=plpgsql-check-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=timescaledb-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-hint-plan-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=kq-imcx-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-cron-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-pgx-ulid-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=rdkit-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-uuidv7-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-roaringbitmap-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY --from=pg-embedding-pg-build /usr/local/pgsql/ /usr/local/pgsql/
+COPY pgxn/ pgxn/
+
+RUN make -j $(getconf _NPROCESSORS_ONLN) \
+        PG_CONFIG=/usr/local/pgsql/bin/pg_config \
+        -C pgxn/neon \
+        -s install && \
+    make -j $(getconf _NPROCESSORS_ONLN) \
+        PG_CONFIG=/usr/local/pgsql/bin/pg_config \
+        -C pgxn/neon_utils \
+        -s install && \
+    make -j $(getconf _NPROCESSORS_ONLN) \
+        PG_CONFIG=/usr/local/pgsql/bin/pg_config \
+        -C pgxn/neon_rmgr \
+        -s install && \
+    case "${PG_VERSION}" in \
+        "v14" | "v15") \
+        ;; \
+        "v16") \
+            echo "Skipping HNSW for PostgreSQL 16" && exit 0 \
+        ;; \
+        *) \
+            echo "unexpected PostgreSQL version" && exit 1 \
+        ;; \
+        esac && \
+    make -j $(getconf _NPROCESSORS_ONLN) \
+        PG_CONFIG=/usr/local/pgsql/bin/pg_config \
+        -C pgxn/hnsw \
+        -s install
+
+#########################################################################################
+#
+# Compile and run the Neon-specific `compute_ctl` binary
+#
+#########################################################################################
+FROM $REPOSITORY/$IMAGE:$TAG AS compute-tools
+ARG BUILD_TAG
+ENV BUILD_TAG=$BUILD_TAG
+
+USER nonroot
+# Copy entire project to get Cargo.* files with proper dependencies for the whole project
+COPY --chown=nonroot . .
+RUN cd compute_tools && cargo build --locked --profile release-line-debug-size-lto
+
+#########################################################################################
+#
+# Clean up postgres folder before inclusion
+#
+#########################################################################################
+FROM neon-pg-ext-build AS postgres-cleanup-layer
+COPY --from=neon-pg-ext-build /usr/local/pgsql /usr/local/pgsql
+
+# Remove binaries from /bin/ that we won't use (or would manually copy & install otherwise)
+RUN cd /usr/local/pgsql/bin && rm ecpg raster2pgsql shp2pgsql pgtopo_export pgtopo_import pgsql2shp
+
+# Remove headers that we won't need anymore - we've completed installation of all extensions
+RUN rm -r /usr/local/pgsql/include
+
+# Remove static postgresql libraries - all compilation is finished, so we
+# can now remove these files - they must be included in other binaries by now
+# if they were to be used by other libraries.
+RUN rm /usr/local/pgsql/lib/lib*.a
+
+#########################################################################################
+#
+# Final layer
+# Put it all together into the final image
+#
+#########################################################################################
+FROM debian:bullseye-slim
+# Add user postgres
+RUN mkdir /var/db && useradd -m -d /var/db/postgres postgres && \
+    echo "postgres:test_console_pass" | chpasswd && \
+    mkdir /var/db/postgres/compute && mkdir /var/db/postgres/specs && \
+    chown -R postgres:postgres /var/db/postgres && \
+    chmod 0750 /var/db/postgres/compute && \
+    echo '/usr/local/lib' >> /etc/ld.so.conf && /sbin/ldconfig && \
+    # create folder for file cache
+    mkdir -p -m 777 /neon/cache
+
+COPY --from=postgres-cleanup-layer --chown=postgres /usr/local/pgsql /usr/local
+COPY --from=compute-tools --chown=postgres /home/nonroot/target/release-line-debug-size-lto/compute_ctl /usr/local/bin/compute_ctl
+
+# Install:
+# libreadline8 for psql
+# libicu67, locales for collations (including ICU and plpgsql_check)
+# liblz4-1 for lz4
+# libossp-uuid16 for extension ossp-uuid
+# libgeos, libgdal, libsfcgal1, libproj and libprotobuf-c1 for PostGIS
+# libxml2, libxslt1.1 for xml2
+# libzstd1 for zstd
+# libboost*, libfreetype6, and zlib1g for rdkit
+# ca-certificates for communicating with s3 by compute_ctl
+RUN apt update &&  \
+    apt install --no-install-recommends -y \
+        gdb \
+        libicu67 \
+        liblz4-1 \
+        libreadline8 \
+        libboost-iostreams1.74.0 \
+        libboost-regex1.74.0 \
+        libboost-serialization1.74.0 \
+        libboost-system1.74.0 \
+        libossp-uuid16 \
+        libfreetype6 \
+        libgeos-c1v5 \
+        libgdal28 \
+        libproj19 \
+        libprotobuf-c1 \
+        libsfcgal1 \
+        libxml2 \
+        libxslt1.1 \
+        libzstd1 \
+        libcurl4-openssl-dev \
+        locales \
+        procps \
+        zlib1g \
+        ca-certificates && \
+    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* && \
+    localedef -i en_US -c -f UTF-8 -A /usr/share/locale/locale.alias en_US.UTF-8
+
+ENV LANG en_US.utf8
+USER postgres
+ENTRYPOINT ["/usr/local/bin/compute_ctl"]

Dockerfile.compute-tools

@@ -0,0 +1,32 @@
+# First transient image to build compute_tools binaries
+# NB: keep in sync with rust image version in .github/workflows/build_and_test.yml
+ARG REPOSITORY=neondatabase
+ARG IMAGE=rust
+ARG TAG=pinned
+ARG BUILD_TAG
+
+FROM $REPOSITORY/$IMAGE:$TAG AS rust-build
+WORKDIR /home/nonroot
+
+# Enable https://github.com/paritytech/cachepot to cache Rust crates' compilation results in Docker builds.
+# Set up cachepot to use an AWS S3 bucket for cache results, to reuse it between `docker build` invocations.
+# cachepot falls back to local filesystem if S3 is misconfigured, not failing the build.
+ARG RUSTC_WRAPPER=cachepot
+ENV AWS_REGION=eu-central-1
+ENV CACHEPOT_S3_KEY_PREFIX=cachepot
+ARG CACHEPOT_BUCKET=neon-github-dev
+#ARG AWS_ACCESS_KEY_ID
+#ARG AWS_SECRET_ACCESS_KEY
+ARG BUILD_TAG
+ENV BUILD_TAG=$BUILD_TAG
+
+COPY . .
+
+RUN set -e \
+    && mold -run cargo build -p compute_tools --locked --release \
+    && cachepot -s
+
+# Final image that only has one binary
+FROM debian:bullseye-slim
+
+COPY --from=rust-build /home/nonroot/target/release/compute_ctl /usr/local/bin/compute_ctl

LICENSE

@@ -0,0 +1,202 @@
+
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright [yyyy] [name of copyright owner]
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

Makefile

@@ -0,0 +1,265 @@
+ROOT_PROJECT_DIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST))))
+
+# Where to install Postgres, default is ./pg_install, maybe useful for package managers
+POSTGRES_INSTALL_DIR ?= $(ROOT_PROJECT_DIR)/pg_install/
+
+#
+# We differentiate between release / debug build types using the BUILD_TYPE
+# environment variable.
+#
+BUILD_TYPE ?= debug
+ifeq ($(BUILD_TYPE),release)
+	PG_CONFIGURE_OPTS = --enable-debug --with-openssl
+	PG_CFLAGS = -O2 -g3 $(CFLAGS)
+	# Unfortunately, `--profile=...` is a nightly feature
+	CARGO_BUILD_FLAGS += --release
+else ifeq ($(BUILD_TYPE),debug)
+	PG_CONFIGURE_OPTS = --enable-debug --with-openssl --enable-cassert --enable-depend
+	PG_CFLAGS = -O0 -g3 $(CFLAGS)
+else
+	$(error Bad build type '$(BUILD_TYPE)', see Makefile for options)
+endif
+
+UNAME_S := $(shell uname -s)
+ifeq ($(UNAME_S),Linux)
+	# Seccomp BPF is only available for Linux
+	PG_CONFIGURE_OPTS += --with-libseccomp
+else ifeq ($(UNAME_S),Darwin)
+	# macOS with brew-installed openssl requires explicit paths
+	# It can be configured with OPENSSL_PREFIX variable
+	OPENSSL_PREFIX ?= $(shell brew --prefix openssl@3)
+	PG_CONFIGURE_OPTS += --with-includes=$(OPENSSL_PREFIX)/include --with-libraries=$(OPENSSL_PREFIX)/lib
+	PG_CONFIGURE_OPTS += PKG_CONFIG_PATH=$(shell brew --prefix icu4c)/lib/pkgconfig
+	# macOS already has bison and flex in the system, but they are old and result in postgres-v14 target failure
+	# brew formulae are keg-only and not symlinked into HOMEBREW_PREFIX, force their usage
+	EXTRA_PATH_OVERRIDES += $(shell brew --prefix bison)/bin/:$(shell brew --prefix flex)/bin/:
+endif
+
+# Use -C option so that when PostgreSQL "make install" installs the
+# headers, the mtime of the headers are not changed when there have
+# been no changes to the files. Changing the mtime triggers an
+# unnecessary rebuild of 'postgres_ffi'.
+PG_CONFIGURE_OPTS += INSTALL='$(ROOT_PROJECT_DIR)/scripts/ninstall.sh -C'
+
+# Choose whether we should be silent or verbose
+CARGO_BUILD_FLAGS += --$(if $(filter s,$(MAKEFLAGS)),quiet,verbose)
+# Fix for a corner case when make doesn't pass a jobserver
+CARGO_BUILD_FLAGS += $(filter -j1,$(MAKEFLAGS))
+
+# This option has a side effect of passing make jobserver to cargo.
+# However, we shouldn't do this if `make -n` (--dry-run) has been asked.
+CARGO_CMD_PREFIX += $(if $(filter n,$(MAKEFLAGS)),,+)
+# Force cargo not to print progress bar
+CARGO_CMD_PREFIX += CARGO_TERM_PROGRESS_WHEN=never CI=1
+
+#
+# Top level Makefile to build Neon and PostgreSQL
+#
+.PHONY: all
+all: neon postgres neon-pg-ext
+
+### Neon Rust bits
+#
+# The 'postgres_ffi' depends on the Postgres headers.
+.PHONY: neon
+neon: postgres-headers walproposer-lib
+	+@echo "Compiling Neon"
+	$(CARGO_CMD_PREFIX) cargo build $(CARGO_BUILD_FLAGS)
+
+### PostgreSQL parts
+# Some rules are duplicated for Postgres v14 and 15. We may want to refactor
+# to avoid the duplication in the future, but it's tolerable for now.
+#
+$(POSTGRES_INSTALL_DIR)/build/%/config.status:
+	+@echo "Configuring Postgres $* build"
+	@test -s $(ROOT_PROJECT_DIR)/vendor/postgres-$*/configure || { \
+		echo "\nPostgres submodule not found in $(ROOT_PROJECT_DIR)/vendor/postgres-$*/, execute "; \
+		echo "'git submodule update --init --recursive --depth 2 --progress .' in project root.\n"; \
+		exit 1; }
+	mkdir -p $(POSTGRES_INSTALL_DIR)/build/$*
+	(cd $(POSTGRES_INSTALL_DIR)/build/$* && \
+	env PATH="$(EXTRA_PATH_OVERRIDES):$$PATH" $(ROOT_PROJECT_DIR)/vendor/postgres-$*/configure \
+		CFLAGS='$(PG_CFLAGS)' \
+		$(PG_CONFIGURE_OPTS) \
+		--prefix=$(abspath $(POSTGRES_INSTALL_DIR))/$* > configure.log)
+
+# nicer alias to run 'configure'
+# Note: I've been unable to use templates for this part of our configuration.
+# I'm not sure why it wouldn't work, but this is the only place (apart from
+# the "build-all-versions" entry points) where direct mention of PostgreSQL
+# versions is used.
+.PHONY: postgres-configure-v16
+postgres-configure-v16: $(POSTGRES_INSTALL_DIR)/build/v16/config.status
+.PHONY: postgres-configure-v15
+postgres-configure-v15: $(POSTGRES_INSTALL_DIR)/build/v15/config.status
+.PHONY: postgres-configure-v14
+postgres-configure-v14: $(POSTGRES_INSTALL_DIR)/build/v14/config.status
+
+# Install the PostgreSQL header files into $(POSTGRES_INSTALL_DIR)/<version>/include
+.PHONY: postgres-headers-%
+postgres-headers-%: postgres-configure-%
+	+@echo "Installing PostgreSQL $* headers"
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/include MAKELEVEL=0 install
+
+# Compile and install PostgreSQL
+.PHONY: postgres-%
+postgres-%: postgres-configure-% \
+		  postgres-headers-% # to prevent `make install` conflicts with neon's `postgres-headers`
+	+@echo "Compiling PostgreSQL $*"
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$* MAKELEVEL=0 install
+	+@echo "Compiling libpq $*"
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/interfaces/libpq install
+	+@echo "Compiling pg_prewarm $*"
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pg_prewarm install
+	+@echo "Compiling pg_buffercache $*"
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pg_buffercache install
+	+@echo "Compiling pageinspect $*"
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pageinspect install
+	+@echo "Compiling amcheck $*"
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/amcheck install
+
+.PHONY: postgres-clean-%
+postgres-clean-%:
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$* MAKELEVEL=0 clean
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pg_buffercache clean
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/contrib/pageinspect clean
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$*/src/interfaces/libpq clean
+
+.PHONY: postgres-check-%
+postgres-check-%: postgres-%
+	$(MAKE) -C $(POSTGRES_INSTALL_DIR)/build/$* MAKELEVEL=0 check
+
+.PHONY: neon-pg-ext-%
+neon-pg-ext-%: postgres-%
+	+@echo "Compiling neon $*"
+	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-$*
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
+		-C $(POSTGRES_INSTALL_DIR)/build/neon-$* \
+		-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile install
+	+@echo "Compiling neon_walredo $*"
+	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-walredo-$*
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
+		-C $(POSTGRES_INSTALL_DIR)/build/neon-walredo-$* \
+		-f $(ROOT_PROJECT_DIR)/pgxn/neon_walredo/Makefile install
+	+@echo "Compiling neon_rmgr $*"
+	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-rmgr-$*
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
+		-C $(POSTGRES_INSTALL_DIR)/build/neon-rmgr-$* \
+		-f $(ROOT_PROJECT_DIR)/pgxn/neon_rmgr/Makefile install
+	+@echo "Compiling neon_test_utils $*"
+	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-test-utils-$*
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
+		-C $(POSTGRES_INSTALL_DIR)/build/neon-test-utils-$* \
+		-f $(ROOT_PROJECT_DIR)/pgxn/neon_test_utils/Makefile install
+	+@echo "Compiling neon_utils $*"
+	mkdir -p $(POSTGRES_INSTALL_DIR)/build/neon-utils-$*
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
+		-C $(POSTGRES_INSTALL_DIR)/build/neon-utils-$* \
+		-f $(ROOT_PROJECT_DIR)/pgxn/neon_utils/Makefile install
+
+.PHONY: neon-pg-ext-clean-%
+neon-pg-ext-clean-%:
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
+	-C $(POSTGRES_INSTALL_DIR)/build/neon-$* \
+	-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile clean
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
+	-C $(POSTGRES_INSTALL_DIR)/build/neon-walredo-$* \
+	-f $(ROOT_PROJECT_DIR)/pgxn/neon_walredo/Makefile clean
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
+	-C $(POSTGRES_INSTALL_DIR)/build/neon-test-utils-$* \
+	-f $(ROOT_PROJECT_DIR)/pgxn/neon_test_utils/Makefile clean
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/$*/bin/pg_config \
+	-C $(POSTGRES_INSTALL_DIR)/build/neon-utils-$* \
+	-f $(ROOT_PROJECT_DIR)/pgxn/neon_utils/Makefile clean
+
+# Build walproposer as a static library. walproposer source code is located
+# in the pgxn/neon directory.
+# 
+# We also need to include libpgport.a and libpgcommon.a, because walproposer
+# uses some functions from those libraries.
+# 
+# Some object files are removed from libpgport.a and libpgcommon.a because
+# they depend on openssl and other libraries that are not included in our
+# Rust build.
+.PHONY: walproposer-lib
+walproposer-lib: neon-pg-ext-v16
+	+@echo "Compiling walproposer-lib"
+	mkdir -p $(POSTGRES_INSTALL_DIR)/build/walproposer-lib
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/v16/bin/pg_config CFLAGS='$(PG_CFLAGS) $(COPT)' \
+		-C $(POSTGRES_INSTALL_DIR)/build/walproposer-lib \
+		-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile walproposer-lib
+	cp $(POSTGRES_INSTALL_DIR)/v16/lib/libpgport.a $(POSTGRES_INSTALL_DIR)/build/walproposer-lib
+	cp $(POSTGRES_INSTALL_DIR)/v16/lib/libpgcommon.a $(POSTGRES_INSTALL_DIR)/build/walproposer-lib
+ifeq ($(UNAME_S),Linux)
+	$(AR) d $(POSTGRES_INSTALL_DIR)/build/walproposer-lib/libpgport.a \
+		pg_strong_random.o
+	$(AR) d $(POSTGRES_INSTALL_DIR)/build/walproposer-lib/libpgcommon.a \
+		pg_crc32c.o \
+		hmac_openssl.o \
+		cryptohash_openssl.o \
+		scram-common.o \
+		md5_common.o \
+		checksum_helper.o
+endif
+
+.PHONY: walproposer-lib-clean
+walproposer-lib-clean:
+	$(MAKE) PG_CONFIG=$(POSTGRES_INSTALL_DIR)/v16/bin/pg_config \
+		-C $(POSTGRES_INSTALL_DIR)/build/walproposer-lib \
+		-f $(ROOT_PROJECT_DIR)/pgxn/neon/Makefile clean
+
+.PHONY: neon-pg-ext
+neon-pg-ext: \
+	neon-pg-ext-v14 \
+	neon-pg-ext-v15 \
+	neon-pg-ext-v16
+
+.PHONY: neon-pg-ext-clean
+neon-pg-ext-clean: \
+	neon-pg-ext-clean-v14 \
+	neon-pg-ext-clean-v15 \
+	neon-pg-ext-clean-v16
+
+# shorthand to build all Postgres versions
+.PHONY: postgres
+postgres: \
+	postgres-v14 \
+	postgres-v15 \
+	postgres-v16
+
+.PHONY: postgres-headers
+postgres-headers: \
+	postgres-headers-v14 \
+	postgres-headers-v15 \
+	postgres-headers-v16
+
+.PHONY: postgres-clean
+postgres-clean: \
+	postgres-clean-v14 \
+	postgres-clean-v15 \
+	postgres-clean-v16
+
+.PHONY: postgres-check
+postgres-check: \
+	postgres-check-v14 \
+	postgres-check-v15 \
+	postgres-check-v16
+
+# This doesn't remove the effects of 'configure'.
+.PHONY: clean
+clean: postgres-clean neon-pg-ext-clean
+	$(CARGO_CMD_PREFIX) cargo clean
+
+# This removes everything
+.PHONY: distclean
+distclean:
+	rm -rf $(POSTGRES_INSTALL_DIR)
+	$(CARGO_CMD_PREFIX) cargo clean
+
+.PHONY: fmt
+fmt:
+	./pre-commit.py --fix-inplace
+
+.PHONY: setup-pre-commit-hook
+setup-pre-commit-hook:
+	ln -s -f $(ROOT_PROJECT_DIR)/pre-commit.py .git/hooks/pre-commit

NOTICE

@@ -0,0 +1,5 @@
+Neon
+Copyright 2022 Neon Inc.
+
+The PostgreSQL submodules in vendor/ are licensed under the PostgreSQL license.
+See vendor/postgres-vX/COPYRIGHT for details.

README.md

@@ -1,92 +1,276 @@
-# Zenith
+[![Neon](https://user-images.githubusercontent.com/13738772/236813940-dcfdcb5b-69d3-449b-a686-013febe834d4.png)](https://neon.tech)
 
-Zenith substitutes PostgreSQL storage layer and redistributes data across a cluster of nodes
+# Neon
+
+Neon is a serverless open-source alternative to AWS Aurora Postgres. It separates storage and compute and substitutes the PostgreSQL storage layer by redistributing data across a cluster of nodes.
+
+## Quick start
+Try the [Neon Free Tier](https://neon.tech/docs/introduction/technical-preview-free-tier/) to create a serverless Postgres instance. Then connect to it with your preferred Postgres client (psql, dbeaver, etc) or use the online [SQL Editor](https://neon.tech/docs/get-started-with-neon/query-with-neon-sql-editor/). See [Connect from any application](https://neon.tech/docs/connect/connect-from-any-app/) for connection instructions.
+
+Alternatively, compile and run the project [locally](#running-local-installation).
+
+## Architecture overview
+
+A Neon installation consists of compute nodes and the Neon storage engine. Compute nodes are stateless PostgreSQL nodes backed by the Neon storage engine.
+
+The Neon storage engine consists of two major components:
+- Pageserver. Scalable storage backend for the compute nodes.
+- Safekeepers. The safekeepers form a redundant WAL service that received WAL from the compute node, and stores it durably until it has been processed by the pageserver and uploaded to cloud storage.
+
+See developer documentation in [SUMMARY.md](/docs/SUMMARY.md) for more information.
 
 ## Running local installation
 
-1. Build zenith and patched postgres
-```sh
-git clone --recursive https://github.com/libzenith/zenith.git
-cd zenith
-./pgbuild.sh # builds postgres and installs it to ./tmp_install
-cargo build
+
+#### Installing dependencies on Linux
+1. Install build dependencies and other applicable packages
+
+* On Ubuntu or Debian, this set of packages should be sufficient to build the code:
+```bash
+apt install build-essential libtool libreadline-dev zlib1g-dev flex bison libseccomp-dev \
+libssl-dev clang pkg-config libpq-dev cmake postgresql-client protobuf-compiler \
+libcurl4-openssl-dev openssl python-poetry lsof libicu-dev
+```
+* On Fedora, these packages are needed:
+```bash
+dnf install flex bison readline-devel zlib-devel openssl-devel \
+  libseccomp-devel perl clang cmake postgresql postgresql-contrib protobuf-compiler \
+  protobuf-devel libcurl-devel openssl poetry lsof libicu-devel
+```
+* On Arch based systems, these packages are needed:
+```bash
+pacman -S base-devel readline zlib libseccomp openssl clang \
+postgresql-libs cmake postgresql protobuf curl lsof
 ```
 
-2. Start pageserver and postggres on top of it (should be called from repo root):
+Building Neon requires 3.15+ version of `protoc` (protobuf-compiler). If your distribution provides an older version, you can install a newer version from [here](https://github.com/protocolbuffers/protobuf/releases).
+
+2. [Install Rust](https://www.rust-lang.org/tools/install)
+```
+# recommended approach from https://www.rust-lang.org/tools/install
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+```
+
+#### Installing dependencies on macOS (12.3.1)
+1. Install XCode and dependencies
+```
+xcode-select --install
+brew install protobuf openssl flex bison icu4c pkg-config
+
+# add openssl to PATH, required for ed25519 keys generation in neon_local
+echo 'export PATH="$(brew --prefix openssl)/bin:$PATH"' >> ~/.zshrc
+```
+
+2. [Install Rust](https://www.rust-lang.org/tools/install)
+```
+# recommended approach from https://www.rust-lang.org/tools/install
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+```
+
+3. Install PostgreSQL Client
+```
+# from https://stackoverflow.com/questions/44654216/correct-way-to-install-psql-without-full-postgres-on-macos
+brew install libpq
+brew link --force libpq
+```
+
+#### Rustc version
+
+The project uses [rust toolchain file](./rust-toolchain.toml) to define the version it's built with in CI for testing and local builds.
+
+This file is automatically picked up by [`rustup`](https://rust-lang.github.io/rustup/overrides.html#the-toolchain-file) that installs (if absent) and uses the toolchain version pinned in the file.
+
+rustup users who want to build with another toolchain can use [`rustup override`](https://rust-lang.github.io/rustup/overrides.html#directory-overrides) command to set a specific toolchain for the project's directory.
+
+non-rustup users most probably are not getting the same toolchain automatically from the file, so are responsible to manually verify their toolchain matches the version in the file.
+Newer rustc versions most probably will work fine, yet older ones might not be supported due to some new features used by the project or the crates.
+
+#### Building on Linux
+
+1. Build neon and patched postgres
+```
+# Note: The path to the neon sources can not contain a space.
+
+git clone --recursive https://github.com/neondatabase/neon.git
+cd neon
+
+# The preferred and default is to make a debug build. This will create a
+# demonstrably slower build than a release build. For a release build,
+# use "BUILD_TYPE=release make -j`nproc` -s"
+# Remove -s for the verbose build log
+
+make -j`nproc` -s
+```
+
+#### Building on OSX
+
+1. Build neon and patched postgres
+```
+# Note: The path to the neon sources can not contain a space.
+
+git clone --recursive https://github.com/neondatabase/neon.git
+cd neon
+
+# The preferred and default is to make a debug build. This will create a
+# demonstrably slower build than a release build. For a release build,
+# use "BUILD_TYPE=release make -j`sysctl -n hw.logicalcpu` -s"
+# Remove -s for the verbose build log
+
+make -j`sysctl -n hw.logicalcpu` -s
+```
+
+#### Dependency installation notes
+To run the `psql` client, install the `postgresql-client` package or modify `PATH` and `LD_LIBRARY_PATH` to include `pg_install/bin` and `pg_install/lib`, respectively.
+
+To run the integration tests or Python scripts (not required to use the code), install
+Python (3.9 or higher), and install python3 packages using `./scripts/pysync` (requires [poetry>=1.3](https://python-poetry.org/)) in the project directory.
+
+
+#### Running neon database
+1. Start pageserver and postgres on top of it (should be called from repo root):
 ```sh
-# Create ~/.zenith with proper paths to binaries and data
+# Create repository in .neon with proper paths to binaries and data
 # Later that would be responsibility of a package install script
->./target/debug/zenith init
+> cargo neon init
+Initializing pageserver node 1 at '127.0.0.1:64000' in ".neon"
 
-# start pageserver
-> ./target/debug/zenith pageserver start
-Starting pageserver at '127.0.0.1:64000'
+# start pageserver, safekeeper, and broker for their intercommunication
+> cargo neon start
+Starting neon broker at 127.0.0.1:50051.
+storage_broker started, pid: 2918372
+Starting pageserver node 1 at '127.0.0.1:64000' in ".neon".
+pageserver started, pid: 2918386
+Starting safekeeper at '127.0.0.1:5454' in '.neon/safekeepers/sk1'.
+safekeeper 1 started, pid: 2918437
 
-# create and configure postgres data dir
-> ./target/debug/zenith pg create
-Creating new postgres: path=/Users/user/code/zenith/tmp_check_cli/compute/pg1 port=55432
-Database initialized
+# create initial tenant and use it as a default for every future neon_local invocation
+> cargo neon tenant create --set-default
+tenant 9ef87a5bf0d92544f6fafeeb3239695c successfully created on the pageserver
+Created an initial timeline 'de200bd42b49cc1814412c7e592dd6e9' at Lsn 0/16B5A50 for tenant: 9ef87a5bf0d92544f6fafeeb3239695c
+Setting tenant 9ef87a5bf0d92544f6fafeeb3239695c as a default one
 
-# start it
-> ./target/debug/zenith pg start pg1
+# start postgres compute node
+> cargo neon endpoint start main
+Starting new endpoint main (PostgreSQL v14) on timeline de200bd42b49cc1814412c7e592dd6e9 ...
+Starting postgres at 'postgresql://cloud_admin@127.0.0.1:55432/postgres'
 
-# look up status and connection info
-> ./target/debug/zenith pg list     
-NODE		ADDRESS				STATUS
-pg1			127.0.0.1:55432		running
+# check list of running postgres instances
+> cargo neon endpoint list
+ ENDPOINT  ADDRESS          TIMELINE                          BRANCH NAME  LSN        STATUS
+ main      127.0.0.1:55432  de200bd42b49cc1814412c7e592dd6e9  main         0/16B5BA8  running
 ```
 
-3. Now it is possible to connect to postgres and run some queries:
-```
-> psql -p55432 -h 127.0.0.1 postgres
+2. Now, it is possible to connect to postgres and run some queries:
+```text
+> psql -p55432 -h 127.0.0.1 -U cloud_admin postgres
 postgres=# CREATE TABLE t(key int primary key, value text);
 CREATE TABLE
 postgres=# insert into t values(1,1);
 INSERT 0 1
 postgres=# select * from t;
- key | value 
+ key | value
 -----+-------
    1 | 1
 (1 row)
 ```
 
-## Running tests
-
+3. And create branches and run postgres on them:
 ```sh
-git clone --recursive https://github.com/libzenith/zenith.git
-./pgbuild.sh # builds postgres and installs it to ./tmp_install
-cargo test -- --test-threads=1
+# create branch named migration_check
+> cargo neon timeline branch --branch-name migration_check
+Created timeline 'b3b863fa45fa9e57e615f9f2d944e601' at Lsn 0/16F9A00 for tenant: 9ef87a5bf0d92544f6fafeeb3239695c. Ancestor timeline: 'main'
+
+# check branches tree
+> cargo neon timeline list
+(L) main [de200bd42b49cc1814412c7e592dd6e9]
+(L) ┗━ @0/16F9A00: migration_check [b3b863fa45fa9e57e615f9f2d944e601]
+
+# start postgres on that branch
+> cargo neon endpoint start migration_check --branch-name migration_check
+Starting new endpoint migration_check (PostgreSQL v14) on timeline b3b863fa45fa9e57e615f9f2d944e601 ...
+Starting postgres at 'postgresql://cloud_admin@127.0.0.1:55434/postgres'
+
+# check the new list of running postgres instances
+> cargo neon endpoint list
+ ENDPOINT         ADDRESS          TIMELINE                          BRANCH NAME      LSN        STATUS
+ main             127.0.0.1:55432  de200bd42b49cc1814412c7e592dd6e9  main             0/16F9A38  running
+ migration_check  127.0.0.1:55434  b3b863fa45fa9e57e615f9f2d944e601  migration_check  0/16F9A70  running
+
+# this new postgres instance will have all the data from 'main' postgres,
+# but all modifications would not affect data in original postgres
+> psql -p55434 -h 127.0.0.1 -U cloud_admin postgres
+postgres=# select * from t;
+ key | value
+-----+-------
+   1 | 1
+(1 row)
+
+postgres=# insert into t values(2,2);
+INSERT 0 1
+
+# check that the new change doesn't affect the 'main' postgres
+> psql -p55432 -h 127.0.0.1 -U cloud_admin postgres
+postgres=# select * from t;
+ key | value
+-----+-------
+   1 | 1
+(1 row)
 ```
 
-## Source tree layout
+4. If you want to run tests afterward (see below), you must stop all the running of the pageserver, safekeeper, and postgres instances
+   you have just started. You can terminate them all with one command:
+```sh
+> cargo neon stop
+```
 
-/walkeeper:
+## Running tests
 
-WAL safekeeper. Written in Rust.
+Ensure your dependencies are installed as described [here](https://github.com/neondatabase/neon#dependency-installation-notes).
 
-/pageserver:
+```sh
+git clone --recursive https://github.com/neondatabase/neon.git
 
-Page Server. Written in Rust.
+CARGO_BUILD_FLAGS="--features=testing" make
 
-Depends on the modified 'postgres' binary for WAL redo.
+./scripts/pytest
+```
 
-/integration_tests:
+By default, this runs both debug and release modes, and all supported postgres versions. When
+testing locally, it is convenient to run just run one set of permutations, like this:
 
-Tests with different combinations of a Postgres compute node, WAL safekeeper and Page Server.
+```sh
+DEFAULT_PG_VERSION=15 BUILD_TYPE=release ./scripts/pytest
+```
 
-/mgmt-console:
+## Documentation
 
-Web UI to launch (modified) Postgres servers, using S3 as the backing store. Written in Python.
-This is somewhat outdated, as it doesn't use the WAL safekeeper or Page Servers.
+[docs](/docs) Contains a top-level overview of all available markdown documentation.
 
-/vendor/postgres:
+- [sourcetree.md](/docs/sourcetree.md) contains overview of source tree layout.
 
-PostgreSQL source tree, with the modifications needed for Zenith.
+To view your `rustdoc` documentation in a browser, try running `cargo doc --no-deps --open`
 
-/vendor/postgres/src/bin/safekeeper:
+See also README files in some source directories, and `rustdoc` style documentation comments.
 
-Extension (safekeeper_proxy) that runs in the compute node, and connects to the WAL safekeepers
-and streams the WAL
+Other resources:
 
+- [SELECT 'Hello, World'](https://neon.tech/blog/hello-world/): Blog post by Nikita Shamgunov on the high level architecture
+- [Architecture decisions in Neon](https://neon.tech/blog/architecture-decisions-in-neon/): Blog post by Heikki Linnakangas
+- [Neon: Serverless PostgreSQL!](https://www.youtube.com/watch?v=rES0yzeERns): Presentation on storage system by Heikki Linnakangas in the CMU Database Group seminar series
 
+### Postgres-specific terms
 
+Due to Neon's very close relation with PostgreSQL internals, numerous specific terms are used.
+The same applies to certain spelling: i.e. we use MB to denote 1024 * 1024 bytes, while MiB would be technically more correct, it's inconsistent with what PostgreSQL code and its documentation use.
+
+To get more familiar with this aspect, refer to:
+
+- [Neon glossary](/docs/glossary.md)
+- [PostgreSQL glossary](https://www.postgresql.org/docs/14/glossary.html)
+- Other PostgreSQL documentation and sources (Neon fork sources can be found [here](https://github.com/neondatabase/postgres))
+
+## Join the development
+
+- Read [CONTRIBUTING.md](/CONTRIBUTING.md) to learn about project code style and practices.
+- To get familiar with a source tree layout, use [sourcetree.md](/docs/sourcetree.md).
+- To learn more about PostgreSQL internals, check http://www.interdb.jp/pg/index.html

cli-v2-story.md

@@ -1,188 +0,0 @@
-Create a new Zenith repository in the current directory:
-
-    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli init
-    The files belonging to this database system will be owned by user "heikki".
-    This user must also own the server process.
-    
-    The database cluster will be initialized with locale "en_GB.UTF-8".
-    The default database encoding has accordingly been set to "UTF8".
-    The default text search configuration will be set to "english".
-    
-    Data page checksums are disabled.
-    
-    creating directory tmp ... ok
-    creating subdirectories ... ok
-    selecting dynamic shared memory implementation ... posix
-    selecting default max_connections ... 100
-    selecting default shared_buffers ... 128MB
-    selecting default time zone ... Europe/Helsinki
-    creating configuration files ... ok
-    running bootstrap script ... ok
-    performing post-bootstrap initialization ... ok
-    syncing data to disk ... ok
-    
-    initdb: warning: enabling "trust" authentication for local connections
-    You can change this by editing pg_hba.conf or using the option -A, or
-    --auth-local and --auth-host, the next time you run initdb.
-    new zenith repository was created in .zenith
-
-Initially, there is only one branch:
-
-    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli branch
-      main
-
-Start a local Postgres instance on the branch:
-
-    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli start main
-    Creating data directory from snapshot at 0/15FFB08...
-    waiting for server to start....2021-04-13 09:27:43.919 EEST [984664] LOG:  starting PostgreSQL 14devel on x86_64-pc-linux-gnu, compiled by gcc (Debian 10.2.1-6) 10.2.1 20210110, 64-bit
-    2021-04-13 09:27:43.920 EEST [984664] LOG:  listening on IPv6 address "::1", port 5432
-    2021-04-13 09:27:43.920 EEST [984664] LOG:  listening on IPv4 address "127.0.0.1", port 5432
-    2021-04-13 09:27:43.927 EEST [984664] LOG:  listening on Unix socket "/tmp/.s.PGSQL.5432"
-    2021-04-13 09:27:43.939 EEST [984665] LOG:  database system was interrupted; last known up at 2021-04-13 09:27:33 EEST
-    2021-04-13 09:27:43.939 EEST [984665] LOG:  creating missing WAL directory "pg_wal/archive_status"
-    2021-04-13 09:27:44.189 EEST [984665] LOG:  database system was not properly shut down; automatic recovery in progress
-    2021-04-13 09:27:44.195 EEST [984665] LOG:  invalid record length at 0/15FFB80: wanted 24, got 0
-    2021-04-13 09:27:44.195 EEST [984665] LOG:  redo is not required
-    2021-04-13 09:27:44.225 EEST [984664] LOG:  database system is ready to accept connections
-     done
-    server started
-
-Run some commands against it:
-
-    ~/git-sandbox/zenith (cli-v2)$ psql postgres -c "create table foo (t text);" 
-    CREATE TABLE
-    ~/git-sandbox/zenith (cli-v2)$ psql postgres -c "insert into foo values ('inserted on the main branch');" 
-    INSERT 0 1
-    ~/git-sandbox/zenith (cli-v2)$ psql postgres -c "select * from foo" 
-                  t              
-    -----------------------------
-     inserted on the main branch
-    (1 row)
-
-Create a new branch called 'experimental'. We create it from the
-current end of the 'main' branch, but you could specify a different
-LSN as the start point instead.
-
-    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli branch experimental main
-    branching at end of WAL: 0/161F478
-    
-    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli branch 
-      experimental
-      main
-
-Start another Postgres instance off the 'experimental' branch:
-
-    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli start experimental -- -o -p5433
-    Creating data directory from snapshot at 0/15FFB08...
-    waiting for server to start....2021-04-13 09:28:41.874 EEST [984766] LOG:  starting PostgreSQL 14devel on x86_64-pc-linux-gnu, compiled by gcc (Debian 10.2.1-6) 10.2.1 20210110, 64-bit
-    2021-04-13 09:28:41.875 EEST [984766] LOG:  listening on IPv6 address "::1", port 5433
-    2021-04-13 09:28:41.875 EEST [984766] LOG:  listening on IPv4 address "127.0.0.1", port 5433
-    2021-04-13 09:28:41.883 EEST [984766] LOG:  listening on Unix socket "/tmp/.s.PGSQL.5433"
-    2021-04-13 09:28:41.896 EEST [984767] LOG:  database system was interrupted; last known up at 2021-04-13 09:27:33 EEST
-    2021-04-13 09:28:42.265 EEST [984767] LOG:  database system was not properly shut down; automatic recovery in progress
-    2021-04-13 09:28:42.269 EEST [984767] LOG:  redo starts at 0/15FFB80
-    2021-04-13 09:28:42.272 EEST [984767] LOG:  invalid record length at 0/161F4B0: wanted 24, got 0
-    2021-04-13 09:28:42.272 EEST [984767] LOG:  redo done at 0/161F478 system usage: CPU: user: 0.00 s, system: 0.00 s, elapsed: 0.00 s
-    2021-04-13 09:28:42.321 EEST [984766] LOG:  database system is ready to accept connections
-     done
-    server started
-
-Insert some a row on the 'experimental' branch:
-
-    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5433 -c "select * from foo" 
-                  t              
-    -----------------------------
-     inserted on the main branch
-    (1 row)
-    
-    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5433 -c "insert into foo values ('inserted on experimental')" 
-    INSERT 0 1
-    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5433 -c "select * from foo" 
-                  t              
-    -----------------------------
-     inserted on the main branch
-     inserted on experimental
-    (2 rows)
-    
-See that the other Postgres instance is still running on 'main' branch on port 5432:
-
-
-    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5432 -c "select * from foo" 
-                  t              
-    -----------------------------
-     inserted on the main branch
-    (1 row)
-
-
-
-
-Everything is stored in the .zenith directory:
-
-    ~/git-sandbox/zenith (cli-v2)$ ls -l .zenith/
-    total 12
-    drwxr-xr-x 4 heikki heikki 4096 Apr 13 09:28 datadirs
-    drwxr-xr-x 4 heikki heikki 4096 Apr 13 09:27 refs
-    drwxr-xr-x 4 heikki heikki 4096 Apr 13 09:28 timelines
-
-The 'datadirs' directory contains the datadirs of the running instances:
-
-    ~/git-sandbox/zenith (cli-v2)$ ls -l .zenith/datadirs/
-    total 8
-    drwx------ 18 heikki heikki 4096 Apr 13 09:27 3c0c634c1674079b2c6d4edf7c91523e
-    drwx------ 18 heikki heikki 4096 Apr 13 09:28 697e3c103d4b1763cd6e82e4ff361d76
-    ~/git-sandbox/zenith (cli-v2)$ ls -l .zenith/datadirs/3c0c634c1674079b2c6d4edf7c91523e/
-    total 124
-    drwxr-xr-x 5 heikki heikki  4096 Apr 13 09:27 base
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 global
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_commit_ts
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_dynshmem
-    -rw------- 1 heikki heikki  4760 Apr 13 09:27 pg_hba.conf
-    -rw------- 1 heikki heikki  1636 Apr 13 09:27 pg_ident.conf
-    drwxr-xr-x 4 heikki heikki  4096 Apr 13 09:32 pg_logical
-    drwxr-xr-x 4 heikki heikki  4096 Apr 13 09:27 pg_multixact
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_notify
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_replslot
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_serial
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_snapshots
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_stat
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:34 pg_stat_tmp
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_subtrans
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_tblspc
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_twophase
-    -rw------- 1 heikki heikki     3 Apr 13 09:27 PG_VERSION
-    lrwxrwxrwx 1 heikki heikki    52 Apr 13 09:27 pg_wal -> ../../timelines/3c0c634c1674079b2c6d4edf7c91523e/wal
-    drwxr-xr-x 2 heikki heikki  4096 Apr 13 09:27 pg_xact
-    -rw------- 1 heikki heikki    88 Apr 13 09:27 postgresql.auto.conf
-    -rw------- 1 heikki heikki 28688 Apr 13 09:27 postgresql.conf
-    -rw------- 1 heikki heikki    96 Apr 13 09:27 postmaster.opts
-    -rw------- 1 heikki heikki   149 Apr 13 09:27 postmaster.pid
-
-Note how 'pg_wal' is just a symlink to the 'timelines' directory. The
-datadir is ephemeral, you can delete it at any time, and it can be reconstructed
-from the snapshots and WAL stored in the 'timelines' directory. So if you push/pull
-the repository, the 'datadirs' are not included. (They are like git working trees)
-
-    ~/git-sandbox/zenith (cli-v2)$ killall -9 postgres
-    ~/git-sandbox/zenith (cli-v2)$ rm -rf .zenith/datadirs/*
-    ~/git-sandbox/zenith (cli-v2)$ ./target/debug/cli start experimental -- -o -p5433
-    Creating data directory from snapshot at 0/15FFB08...
-    waiting for server to start....2021-04-13 09:37:05.476 EEST [985340] LOG:  starting PostgreSQL 14devel on x86_64-pc-linux-gnu, compiled by gcc (Debian 10.2.1-6) 10.2.1 20210110, 64-bit
-    2021-04-13 09:37:05.477 EEST [985340] LOG:  listening on IPv6 address "::1", port 5433
-    2021-04-13 09:37:05.477 EEST [985340] LOG:  listening on IPv4 address "127.0.0.1", port 5433
-    2021-04-13 09:37:05.487 EEST [985340] LOG:  listening on Unix socket "/tmp/.s.PGSQL.5433"
-    2021-04-13 09:37:05.498 EEST [985341] LOG:  database system was interrupted; last known up at 2021-04-13 09:27:33 EEST
-    2021-04-13 09:37:05.808 EEST [985341] LOG:  database system was not properly shut down; automatic recovery in progress
-    2021-04-13 09:37:05.813 EEST [985341] LOG:  redo starts at 0/15FFB80
-    2021-04-13 09:37:05.815 EEST [985341] LOG:  invalid record length at 0/161F770: wanted 24, got 0
-    2021-04-13 09:37:05.815 EEST [985341] LOG:  redo done at 0/161F738 system usage: CPU: user: 0.00 s, system: 0.00 s, elapsed: 0.00 s
-    2021-04-13 09:37:05.866 EEST [985340] LOG:  database system is ready to accept connections
-     done
-    server started
-    ~/git-sandbox/zenith (cli-v2)$ psql postgres -p5433 -c "select * from foo" 
-                  t              
-    -----------------------------
-     inserted on the main branch
-     inserted on experimental
-    (2 rows)
-

clippy.toml

@@ -0,0 +1,5 @@
+disallowed-methods = [
+    "tokio::task::block_in_place",
+    # Allow this for now, to deny it later once we stop using Handle::block_on completely
+    # "tokio::runtime::Handle::block_on",
+]

compute_tools/.dockerignore

@@ -0,0 +1 @@
+target

compute_tools/.gitignore

@@ -0,0 +1 @@
+target

compute_tools/Cargo.toml

@@ -0,0 +1,40 @@
+[package]
+name = "compute_tools"
+version = "0.1.0"
+edition.workspace = true
+license.workspace = true
+
+[dependencies]
+anyhow.workspace = true
+async-compression.workspace = true
+chrono.workspace = true
+cfg-if.workspace = true
+clap.workspace = true
+flate2.workspace = true
+futures.workspace = true
+hyper = { workspace = true, features = ["full"] }
+notify.workspace = true
+num_cpus.workspace = true
+opentelemetry.workspace = true
+postgres.workspace = true
+regex.workspace = true
+serde.workspace = true
+serde_json.workspace = true
+tar.workspace = true
+reqwest = { workspace = true, features = ["json"] }
+tokio = { workspace = true, features = ["rt", "rt-multi-thread"] }
+tokio-postgres.workspace = true
+tokio-util.workspace = true
+tracing.workspace = true
+tracing-opentelemetry.workspace = true
+tracing-subscriber.workspace = true
+tracing-utils.workspace = true
+url.workspace = true
+
+compute_api.workspace = true
+utils.workspace = true
+workspace_hack.workspace = true
+toml_edit.workspace = true
+remote_storage = { version = "0.1", path = "../libs/remote_storage/" }
+vm_monitor = { version = "0.1", path = "../libs/vm_monitor/" }
+zstd = "0.12.4"

compute_tools/README.md

@@ -0,0 +1,86 @@
+# Compute node tools
+
+Postgres wrapper (`compute_ctl`) is intended to be run as a Docker entrypoint or as a `systemd`
+`ExecStart` option. It will handle all the `Neon` specifics during compute node
+initialization:
+- `compute_ctl` accepts cluster (compute node) specification as a JSON file.
+- Every start is a fresh start, so the data directory is removed and
+  initialized again on each run.
+- Next it will put configuration files into the `PGDATA` directory.
+- Sync safekeepers and get commit LSN.
+- Get `basebackup` from pageserver using the returned on the previous step LSN.
+- Try to start `postgres` and wait until it is ready to accept connections.
+- Check and alter/drop/create roles and databases.
+- Hang waiting on the `postmaster` process to exit.
+
+Also `compute_ctl` spawns two separate service threads:
+- `compute-monitor` checks the last Postgres activity timestamp and saves it
+  into the shared `ComputeNode`;
+- `http-endpoint` runs a Hyper HTTP API server, which serves readiness and the
+  last activity requests.
+
+If `AUTOSCALING` environment variable is set, `compute_ctl` will start the
+`vm-monitor` located in [`neon/libs/vm_monitor`]. For VM compute nodes,
+`vm-monitor` communicates with the VM autoscaling system. It coordinates
+downscaling and requests immediate upscaling under resource pressure.
+
+Usage example:
+```sh
+compute_ctl -D /var/db/postgres/compute \
+            -C 'postgresql://cloud_admin@localhost/postgres' \
+            -S /var/db/postgres/specs/current.json \
+            -b /usr/local/bin/postgres
+```
+
+## Tests
+
+Cargo formatter:
+```sh
+cargo fmt
+```
+
+Run tests:
+```sh
+cargo test
+```
+
+Clippy linter:
+```sh
+cargo clippy --all --all-targets -- -Dwarnings -Drust-2018-idioms
+```
+
+## Cross-platform compilation
+
+Imaging that you are on macOS (x86) and you want a Linux GNU (`x86_64-unknown-linux-gnu` platform in `rust` terminology) executable.
+
+### Using docker
+
+You can use a throw-away Docker container ([rustlang/rust](https://hub.docker.com/r/rustlang/rust/) image) for doing that:
+```sh
+docker run --rm \
+    -v $(pwd):/compute_tools \
+    -w /compute_tools \
+    -t rustlang/rust:nightly cargo build --release --target=x86_64-unknown-linux-gnu
+```
+or one-line:
+```sh
+docker run --rm -v $(pwd):/compute_tools -w /compute_tools -t rust:latest cargo build --release --target=x86_64-unknown-linux-gnu
+```
+
+### Using rust native cross-compilation
+
+Another way is to add `x86_64-unknown-linux-gnu` target on your host system:
+```sh
+rustup target add x86_64-unknown-linux-gnu
+```
+
+Install macOS cross-compiler toolchain:
+```sh
+brew tap SergioBenitez/osxct
+brew install x86_64-unknown-linux-gnu
+```
+
+And finally run `cargo build`:
+```sh
+CARGO_TARGET_X86_64_UNKNOWN_LINUX_GNU_LINKER=x86_64-unknown-linux-gnu-gcc cargo build --target=x86_64-unknown-linux-gnu --release
+```

compute_tools/rustfmt.toml

@@ -0,0 +1 @@
+max_width = 100

compute_tools/src/bin/compute_ctl.rs

@@ -0,0 +1,494 @@
+//!
+//! Postgres wrapper (`compute_ctl`) is intended to be run as a Docker entrypoint or as a `systemd`
+//! `ExecStart` option. It will handle all the `Neon` specifics during compute node
+//! initialization:
+//! - `compute_ctl` accepts cluster (compute node) specification as a JSON file.
+//! - Every start is a fresh start, so the data directory is removed and
+//!   initialized again on each run.
+//! - If remote_extension_config is provided, it will be used to fetch extensions list
+//!  and download `shared_preload_libraries` from the remote storage.
+//! - Next it will put configuration files into the `PGDATA` directory.
+//! - Sync safekeepers and get commit LSN.
+//! - Get `basebackup` from pageserver using the returned on the previous step LSN.
+//! - Try to start `postgres` and wait until it is ready to accept connections.
+//! - Check and alter/drop/create roles and databases.
+//! - Hang waiting on the `postmaster` process to exit.
+//!
+//! Also `compute_ctl` spawns two separate service threads:
+//! - `compute-monitor` checks the last Postgres activity timestamp and saves it
+//!   into the shared `ComputeNode`;
+//! - `http-endpoint` runs a Hyper HTTP API server, which serves readiness and the
+//!   last activity requests.
+//!
+//! If `AUTOSCALING` environment variable is set, `compute_ctl` will start the
+//! `vm-monitor` located in [`neon/libs/vm_monitor`]. For VM compute nodes,
+//! `vm-monitor` communicates with the VM autoscaling system. It coordinates
+//! downscaling and requests immediate upscaling under resource pressure.
+//!
+//! Usage example:
+//! ```sh
+//! compute_ctl -D /var/db/postgres/compute \
+//!             -C 'postgresql://cloud_admin@localhost/postgres' \
+//!             -S /var/db/postgres/specs/current.json \
+//!             -b /usr/local/bin/postgres \
+//!             -r {"bucket": "neon-dev-extensions-eu-central-1", "region": "eu-central-1"}
+//! ```
+//!
+use std::collections::HashMap;
+use std::fs::File;
+use std::path::Path;
+use std::process::exit;
+use std::sync::{mpsc, Arc, Condvar, Mutex, RwLock};
+use std::{thread, time::Duration};
+
+use anyhow::{Context, Result};
+use chrono::Utc;
+use clap::Arg;
+use tracing::{error, info};
+use url::Url;
+
+use compute_api::responses::ComputeStatus;
+
+use compute_tools::compute::{ComputeNode, ComputeState, ParsedSpec};
+use compute_tools::configurator::launch_configurator;
+use compute_tools::extension_server::{get_pg_version, init_remote_storage};
+use compute_tools::http::api::launch_http_server;
+use compute_tools::logger::*;
+use compute_tools::monitor::launch_monitor;
+use compute_tools::params::*;
+use compute_tools::spec::*;
+
+// this is an arbitrary build tag. Fine as a default / for testing purposes
+// in-case of not-set environment var
+const BUILD_TAG_DEFAULT: &str = "5670669815";
+
+fn main() -> Result<()> {
+    init_tracing_and_logging(DEFAULT_LOG_LEVEL)?;
+
+    let build_tag = option_env!("BUILD_TAG")
+        .unwrap_or(BUILD_TAG_DEFAULT)
+        .to_string();
+    info!("build_tag: {build_tag}");
+
+    let matches = cli().get_matches();
+    let pgbin_default = String::from("postgres");
+    let pgbin = matches.get_one::<String>("pgbin").unwrap_or(&pgbin_default);
+
+    let remote_ext_config = matches.get_one::<String>("remote-ext-config");
+    let ext_remote_storage = remote_ext_config.map(|x| {
+        init_remote_storage(x).expect("cannot initialize remote extension storage from config")
+    });
+
+    let http_port = *matches
+        .get_one::<u16>("http-port")
+        .expect("http-port is required");
+    let pgdata = matches
+        .get_one::<String>("pgdata")
+        .expect("PGDATA path is required");
+    let connstr = matches
+        .get_one::<String>("connstr")
+        .expect("Postgres connection string is required");
+    let spec_json = matches.get_one::<String>("spec");
+    let spec_path = matches.get_one::<String>("spec-path");
+
+    // Extract OpenTelemetry context for the startup actions from the
+    // TRACEPARENT and TRACESTATE env variables, and attach it to the current
+    // tracing context.
+    //
+    // This is used to propagate the context for the 'start_compute' operation
+    // from the neon control plane. This allows linking together the wider
+    // 'start_compute' operation that creates the compute container, with the
+    // startup actions here within the container.
+    //
+    // There is no standard for passing context in env variables, but a lot of
+    // tools use TRACEPARENT/TRACESTATE, so we use that convention too. See
+    // https://github.com/open-telemetry/opentelemetry-specification/issues/740
+    //
+    // Switch to the startup context here, and exit it once the startup has
+    // completed and Postgres is up and running.
+    //
+    // If this pod is pre-created without binding it to any particular endpoint
+    // yet, this isn't the right place to enter the startup context. In that
+    // case, the control plane should pass the tracing context as part of the
+    // /configure API call.
+    //
+    // NOTE: This is supposed to only cover the *startup* actions. Once
+    // postgres is configured and up-and-running, we exit this span. Any other
+    // actions that are performed on incoming HTTP requests, for example, are
+    // performed in separate spans.
+    //
+    // XXX: If the pod is restarted, we perform the startup actions in the same
+    // context as the original startup actions, which probably doesn't make
+    // sense.
+    let mut startup_tracing_carrier: HashMap<String, String> = HashMap::new();
+    if let Ok(val) = std::env::var("TRACEPARENT") {
+        startup_tracing_carrier.insert("traceparent".to_string(), val);
+    }
+    if let Ok(val) = std::env::var("TRACESTATE") {
+        startup_tracing_carrier.insert("tracestate".to_string(), val);
+    }
+    let startup_context_guard = if !startup_tracing_carrier.is_empty() {
+        use opentelemetry::propagation::TextMapPropagator;
+        use opentelemetry::sdk::propagation::TraceContextPropagator;
+        let guard = TraceContextPropagator::new()
+            .extract(&startup_tracing_carrier)
+            .attach();
+        info!("startup tracing context attached");
+        Some(guard)
+    } else {
+        None
+    };
+
+    let compute_id = matches.get_one::<String>("compute-id");
+    let control_plane_uri = matches.get_one::<String>("control-plane-uri");
+
+    let spec;
+    let mut live_config_allowed = false;
+    match spec_json {
+        // First, try to get cluster spec from the cli argument
+        Some(json) => {
+            info!("got spec from cli argument {}", json);
+            spec = Some(serde_json::from_str(json)?);
+        }
+        None => {
+            // Second, try to read it from the file if path is provided
+            if let Some(sp) = spec_path {
+                let path = Path::new(sp);
+                let file = File::open(path)?;
+                spec = Some(serde_json::from_reader(file)?);
+                live_config_allowed = true;
+            } else if let Some(id) = compute_id {
+                if let Some(cp_base) = control_plane_uri {
+                    live_config_allowed = true;
+                    spec = match get_spec_from_control_plane(cp_base, id) {
+                        Ok(s) => s,
+                        Err(e) => {
+                            error!("cannot get response from control plane: {}", e);
+                            panic!("neither spec nor confirmation that compute is in the Empty state was received");
+                        }
+                    };
+                } else {
+                    panic!("must specify both --control-plane-uri and --compute-id or none");
+                }
+            } else {
+                panic!(
+                    "compute spec should be provided by one of the following ways: \
+                    --spec OR --spec-path OR --control-plane-uri and --compute-id"
+                );
+            }
+        }
+    };
+
+    let mut new_state = ComputeState::new();
+    let spec_set;
+
+    if let Some(spec) = spec {
+        let pspec = ParsedSpec::try_from(spec).map_err(|msg| anyhow::anyhow!(msg))?;
+        info!("new pspec.spec: {:?}", pspec.spec);
+        new_state.pspec = Some(pspec);
+        spec_set = true;
+    } else {
+        spec_set = false;
+    }
+    let compute_node = ComputeNode {
+        connstr: Url::parse(connstr).context("cannot parse connstr as a URL")?,
+        pgdata: pgdata.to_string(),
+        pgbin: pgbin.to_string(),
+        pgversion: get_pg_version(pgbin),
+        live_config_allowed,
+        state: Mutex::new(new_state),
+        state_changed: Condvar::new(),
+        ext_remote_storage,
+        ext_download_progress: RwLock::new(HashMap::new()),
+        build_tag,
+    };
+    let compute = Arc::new(compute_node);
+
+    // If this is a pooled VM, prewarm before starting HTTP server and becoming
+    // available for binding. Prewarming helps postgres start quicker later,
+    // because QEMU will already have it's memory allocated from the host, and
+    // the necessary binaries will alreaady be cached.
+    if !spec_set {
+        compute.prewarm_postgres()?;
+    }
+
+    // Launch http service first, so we were able to serve control-plane
+    // requests, while configuration is still in progress.
+    let _http_handle =
+        launch_http_server(http_port, &compute).expect("cannot launch http endpoint thread");
+
+    let extension_server_port: u16 = http_port;
+
+    if !spec_set {
+        // No spec provided, hang waiting for it.
+        info!("no compute spec provided, waiting");
+
+        let mut state = compute.state.lock().unwrap();
+        while state.status != ComputeStatus::ConfigurationPending {
+            state = compute.state_changed.wait(state).unwrap();
+
+            if state.status == ComputeStatus::ConfigurationPending {
+                info!("got spec, continue configuration");
+                // Spec is already set by the http server handler.
+                break;
+            }
+        }
+    }
+
+    // We got all we need, update the state.
+    let mut state = compute.state.lock().unwrap();
+
+    // Record for how long we slept waiting for the spec.
+    state.metrics.wait_for_spec_ms = Utc::now()
+        .signed_duration_since(state.start_time)
+        .to_std()
+        .unwrap()
+        .as_millis() as u64;
+    // Reset start time to the actual start of the configuration, so that
+    // total startup time was properly measured at the end.
+    state.start_time = Utc::now();
+
+    state.status = ComputeStatus::Init;
+    compute.state_changed.notify_all();
+    drop(state);
+
+    // Launch remaining service threads
+    let _monitor_handle = launch_monitor(&compute);
+    let _configurator_handle = launch_configurator(&compute);
+
+    // Start Postgres
+    let mut delay_exit = false;
+    let mut exit_code = None;
+    let pg = match compute.start_compute(extension_server_port) {
+        Ok(pg) => Some(pg),
+        Err(err) => {
+            error!("could not start the compute node: {:?}", err);
+            let mut state = compute.state.lock().unwrap();
+            state.error = Some(format!("{:?}", err));
+            state.status = ComputeStatus::Failed;
+            drop(state);
+            delay_exit = true;
+            None
+        }
+    };
+
+    // Start the vm-monitor if directed to. The vm-monitor only runs on linux
+    // because it requires cgroups.
+    cfg_if::cfg_if! {
+        if #[cfg(target_os = "linux")] {
+            use std::env;
+            use tokio_util::sync::CancellationToken;
+            let vm_monitor_addr = matches
+                .get_one::<String>("vm-monitor-addr")
+                .expect("--vm-monitor-addr should always be set because it has a default arg");
+            let file_cache_connstr = matches.get_one::<String>("filecache-connstr");
+            let cgroup = matches.get_one::<String>("cgroup");
+
+            // Only make a runtime if we need to.
+            // Note: it seems like you can make a runtime in an inner scope and
+            // if you start a task in it it won't be dropped. However, make it
+            // in the outermost scope just to be safe.
+            let rt = if env::var_os("AUTOSCALING").is_some() {
+                Some(
+                    tokio::runtime::Builder::new_multi_thread()
+                        .worker_threads(4)
+                        .enable_all()
+                        .build()
+                        .expect("failed to create tokio runtime for monitor")
+                )
+            } else {
+                None
+            };
+
+            // This token is used internally by the monitor to clean up all threads
+            let token = CancellationToken::new();
+
+            let vm_monitor = &rt.as_ref().map(|rt| {
+                rt.spawn(vm_monitor::start(
+                    Box::leak(Box::new(vm_monitor::Args {
+                        cgroup: cgroup.cloned(),
+                        pgconnstr: file_cache_connstr.cloned(),
+                        addr: vm_monitor_addr.clone(),
+                    })),
+                    token.clone(),
+                ))
+            });
+        }
+    }
+
+    // Wait for the child Postgres process forever. In this state Ctrl+C will
+    // propagate to Postgres and it will be shut down as well.
+    if let Some(mut pg) = pg {
+        // Startup is finished, exit the startup tracing span
+        drop(startup_context_guard);
+
+        let ecode = pg
+            .wait()
+            .expect("failed to start waiting on Postgres process");
+        info!("Postgres exited with code {}, shutting down", ecode);
+        exit_code = ecode.code()
+    }
+
+    // Terminate the vm_monitor so it releases the file watcher on
+    // /sys/fs/cgroup/neon-postgres.
+    // Note: the vm-monitor only runs on linux because it requires cgroups.
+    cfg_if::cfg_if! {
+        if #[cfg(target_os = "linux")] {
+            if let Some(handle) = vm_monitor {
+                // Kills all threads spawned by the monitor
+                token.cancel();
+                // Kills the actual task running the monitor
+                handle.abort();
+
+                // If handle is some, rt must have been used to produce it, and
+                // hence is also some
+                rt.unwrap().shutdown_timeout(Duration::from_secs(2));
+            }
+        }
+    }
+
+    // Maybe sync safekeepers again, to speed up next startup
+    let compute_state = compute.state.lock().unwrap().clone();
+    let pspec = compute_state.pspec.as_ref().expect("spec must be set");
+    if matches!(pspec.spec.mode, compute_api::spec::ComputeMode::Primary) {
+        info!("syncing safekeepers on shutdown");
+        let storage_auth_token = pspec.storage_auth_token.clone();
+        let lsn = compute.sync_safekeepers(storage_auth_token)?;
+        info!("synced safekeepers at lsn {lsn}");
+    }
+
+    if let Err(err) = compute.check_for_core_dumps() {
+        error!("error while checking for core dumps: {err:?}");
+    }
+
+    // If launch failed, keep serving HTTP requests for a while, so the cloud
+    // control plane can get the actual error.
+    if delay_exit {
+        info!("giving control plane 30s to collect the error before shutdown");
+        thread::sleep(Duration::from_secs(30));
+    }
+
+    // Shutdown trace pipeline gracefully, so that it has a chance to send any
+    // pending traces before we exit. Shutting down OTEL tracing provider may
+    // hang for quite some time, see, for example:
+    // - https://github.com/open-telemetry/opentelemetry-rust/issues/868
+    // - and our problems with staging https://github.com/neondatabase/cloud/issues/3707#issuecomment-1493983636
+    //
+    // Yet, we want computes to shut down fast enough, as we may need a new one
+    // for the same timeline ASAP. So wait no longer than 2s for the shutdown to
+    // complete, then just error out and exit the main thread.
+    info!("shutting down tracing");
+    let (sender, receiver) = mpsc::channel();
+    let _ = thread::spawn(move || {
+        tracing_utils::shutdown_tracing();
+        sender.send(()).ok()
+    });
+    let shutdown_res = receiver.recv_timeout(Duration::from_millis(2000));
+    if shutdown_res.is_err() {
+        error!("timed out while shutting down tracing, exiting anyway");
+    }
+
+    info!("shutting down");
+    exit(exit_code.unwrap_or(1))
+}
+
+fn cli() -> clap::Command {
+    // Env variable is set by `cargo`
+    let version = option_env!("CARGO_PKG_VERSION").unwrap_or("unknown");
+    clap::Command::new("compute_ctl")
+        .version(version)
+        .arg(
+            Arg::new("http-port")
+                .long("http-port")
+                .value_name("HTTP_PORT")
+                .default_value("3080")
+                .value_parser(clap::value_parser!(u16))
+                .required(false),
+        )
+        .arg(
+            Arg::new("connstr")
+                .short('C')
+                .long("connstr")
+                .value_name("DATABASE_URL")
+                .required(true),
+        )
+        .arg(
+            Arg::new("pgdata")
+                .short('D')
+                .long("pgdata")
+                .value_name("DATADIR")
+                .required(true),
+        )
+        .arg(
+            Arg::new("pgbin")
+                .short('b')
+                .long("pgbin")
+                .default_value("postgres")
+                .value_name("POSTGRES_PATH"),
+        )
+        .arg(
+            Arg::new("spec")
+                .short('s')
+                .long("spec")
+                .value_name("SPEC_JSON"),
+        )
+        .arg(
+            Arg::new("spec-path")
+                .short('S')
+                .long("spec-path")
+                .value_name("SPEC_PATH"),
+        )
+        .arg(
+            Arg::new("compute-id")
+                .short('i')
+                .long("compute-id")
+                .value_name("COMPUTE_ID"),
+        )
+        .arg(
+            Arg::new("control-plane-uri")
+                .short('p')
+                .long("control-plane-uri")
+                .value_name("CONTROL_PLANE_API_BASE_URI"),
+        )
+        .arg(
+            Arg::new("remote-ext-config")
+                .short('r')
+                .long("remote-ext-config")
+                .value_name("REMOTE_EXT_CONFIG"),
+        )
+        // TODO(fprasx): we currently have default arguments because the cloud PR
+        // to pass them in hasn't been merged yet. We should get rid of them once
+        // the PR is merged.
+        .arg(
+            Arg::new("vm-monitor-addr")
+                .long("vm-monitor-addr")
+                .default_value("0.0.0.0:10301")
+                .value_name("VM_MONITOR_ADDR"),
+        )
+        .arg(
+            Arg::new("cgroup")
+                .long("cgroup")
+                .default_value("neon-postgres")
+                .value_name("CGROUP"),
+        )
+        .arg(
+            Arg::new("filecache-connstr")
+                .long("filecache-connstr")
+                .default_value(
+                    "host=localhost port=5432 dbname=postgres user=cloud_admin sslmode=disable",
+                )
+                .value_name("FILECACHE_CONNSTR"),
+        )
+        .arg(
+            // DEPRECATED, NO LONGER DOES ANYTHING.
+            // See https://github.com/neondatabase/cloud/issues/7516
+            Arg::new("file-cache-on-disk")
+                .long("file-cache-on-disk")
+                .action(clap::ArgAction::SetTrue),
+        )
+}
+
+#[test]
+fn verify_cli() {
+    cli().debug_assert()
+}

compute_tools/src/checker.rs

@@ -0,0 +1,79 @@
+use anyhow::{anyhow, Ok, Result};
+use postgres::Client;
+use tokio_postgres::NoTls;
+use tracing::{error, instrument, warn};
+
+use crate::compute::ComputeNode;
+
+/// Create a special service table for availability checks
+/// only if it does not exist already.
+pub fn create_availability_check_data(client: &mut Client) -> Result<()> {
+    let query = "
+        DO $$
+        BEGIN
+            IF NOT EXISTS(
+                SELECT 1
+                FROM pg_catalog.pg_tables
+                WHERE tablename = 'health_check'
+            )
+            THEN
+            CREATE TABLE health_check (
+                id serial primary key,
+                updated_at timestamptz default now()
+            );
+            INSERT INTO health_check VALUES (1, now())
+                ON CONFLICT (id) DO UPDATE
+                 SET updated_at = now();
+            END IF;
+        END
+        $$;";
+    client.execute(query, &[])?;
+
+    Ok(())
+}
+
+/// Update timestamp in a row in a special service table to check
+/// that we can actually write some data in this particular timeline.
+#[instrument(skip_all)]
+pub async fn check_writability(compute: &ComputeNode) -> Result<()> {
+    // Connect to the database.
+    let (client, connection) = tokio_postgres::connect(compute.connstr.as_str(), NoTls).await?;
+    if client.is_closed() {
+        return Err(anyhow!("connection to postgres closed"));
+    }
+
+    // The connection object performs the actual communication with the database,
+    // so spawn it off to run on its own.
+    tokio::spawn(async move {
+        if let Err(e) = connection.await {
+            error!("connection error: {}", e);
+        }
+    });
+
+    let query = "
+    INSERT INTO health_check VALUES (1, now())
+        ON CONFLICT (id) DO UPDATE
+         SET updated_at = now();";
+
+    match client.simple_query(query).await {
+        Result::Ok(result) => {
+            if result.len() != 1 {
+                return Err(anyhow::anyhow!(
+                    "expected 1 query results, but got {}",
+                    result.len()
+                ));
+            }
+        }
+        Err(err) => {
+            if let Some(state) = err.code() {
+                if state == &tokio_postgres::error::SqlState::DISK_FULL {
+                    warn!("Tenant disk is full");
+                    return Ok(());
+                }
+            }
+            return Err(err.into());
+        }
+    }
+
+    Ok(())
+}

compute_tools/src/config.rs

@@ -0,0 +1,97 @@
+use std::fs::{File, OpenOptions};
+use std::io;
+use std::io::prelude::*;
+use std::path::Path;
+
+use anyhow::Result;
+
+use crate::pg_helpers::escape_conf_value;
+use crate::pg_helpers::PgOptionsSerialize;
+use compute_api::spec::{ComputeMode, ComputeSpec};
+
+/// Check that `line` is inside a text file and put it there if it is not.
+/// Create file if it doesn't exist.
+pub fn line_in_file(path: &Path, line: &str) -> Result<bool> {
+    let mut file = OpenOptions::new()
+        .read(true)
+        .write(true)
+        .create(true)
+        .append(false)
+        .open(path)?;
+    let buf = io::BufReader::new(&file);
+    let mut count: usize = 0;
+
+    for l in buf.lines() {
+        if l? == line {
+            return Ok(false);
+        }
+        count = 1;
+    }
+
+    write!(file, "{}{}", "\n".repeat(count), line)?;
+    Ok(true)
+}
+
+/// Create or completely rewrite configuration file specified by `path`
+pub fn write_postgres_conf(
+    path: &Path,
+    spec: &ComputeSpec,
+    extension_server_port: Option<u16>,
+) -> Result<()> {
+    // File::create() destroys the file content if it exists.
+    let mut file = File::create(path)?;
+
+    // Write the postgresql.conf content from the spec file as is.
+    if let Some(conf) = &spec.cluster.postgresql_conf {
+        writeln!(file, "{}", conf)?;
+    }
+
+    // Add options for connecting to storage
+    writeln!(file, "# Neon storage settings")?;
+    if let Some(s) = &spec.pageserver_connstring {
+        writeln!(file, "neon.pageserver_connstring={}", escape_conf_value(s))?;
+    }
+    if !spec.safekeeper_connstrings.is_empty() {
+        writeln!(
+            file,
+            "neon.safekeepers={}",
+            escape_conf_value(&spec.safekeeper_connstrings.join(","))
+        )?;
+    }
+    if let Some(s) = &spec.tenant_id {
+        writeln!(file, "neon.tenant_id={}", escape_conf_value(&s.to_string()))?;
+    }
+    if let Some(s) = &spec.timeline_id {
+        writeln!(
+            file,
+            "neon.timeline_id={}",
+            escape_conf_value(&s.to_string())
+        )?;
+    }
+
+    match spec.mode {
+        ComputeMode::Primary => {}
+        ComputeMode::Static(lsn) => {
+            // hot_standby is 'on' by default, but let's be explicit
+            writeln!(file, "hot_standby=on")?;
+            writeln!(file, "recovery_target_lsn='{lsn}'")?;
+        }
+        ComputeMode::Replica => {
+            // hot_standby is 'on' by default, but let's be explicit
+            writeln!(file, "hot_standby=on")?;
+        }
+    }
+
+    // If there are any extra options in the 'settings' field, append those
+    if spec.cluster.settings.is_some() {
+        writeln!(file, "# Managed by compute_ctl: begin")?;
+        write!(file, "{}", spec.cluster.settings.as_pg_settings())?;
+        writeln!(file, "# Managed by compute_ctl: end")?;
+    }
+
+    if let Some(port) = extension_server_port {
+        writeln!(file, "neon.extension_server_port={}", port)?;
+    }
+
+    Ok(())
+}

compute_tools/src/configurator.rs

@@ -0,0 +1,54 @@
+use std::sync::Arc;
+use std::thread;
+
+use tracing::{error, info, instrument};
+
+use compute_api::responses::ComputeStatus;
+
+use crate::compute::ComputeNode;
+
+#[instrument(skip_all)]
+fn configurator_main_loop(compute: &Arc<ComputeNode>) {
+    info!("waiting for reconfiguration requests");
+    loop {
+        let state = compute.state.lock().unwrap();
+        let mut state = compute.state_changed.wait(state).unwrap();
+
+        if state.status == ComputeStatus::ConfigurationPending {
+            info!("got configuration request");
+            state.status = ComputeStatus::Configuration;
+            compute.state_changed.notify_all();
+            drop(state);
+
+            let mut new_status = ComputeStatus::Failed;
+            if let Err(e) = compute.reconfigure() {
+                error!("could not configure compute node: {}", e);
+            } else {
+                new_status = ComputeStatus::Running;
+                info!("compute node configured");
+            }
+
+            // XXX: used to test that API is blocking
+            // std::thread::sleep(std::time::Duration::from_millis(10000));
+
+            compute.set_status(new_status);
+        } else if state.status == ComputeStatus::Failed {
+            info!("compute node is now in Failed state, exiting");
+            break;
+        } else {
+            info!("woken up for compute status: {:?}, sleeping", state.status);
+        }
+    }
+}
+
+pub fn launch_configurator(compute: &Arc<ComputeNode>) -> thread::JoinHandle<()> {
+    let compute = Arc::clone(compute);
+
+    thread::Builder::new()
+        .name("compute-configurator".into())
+        .spawn(move || {
+            configurator_main_loop(&compute);
+            info!("configurator thread is exited");
+        })
+        .expect("cannot launch configurator thread")
+}

compute_tools/src/extension_server.rs

@@ -0,0 +1,287 @@
+// Download extension files from the extension store
+// and put them in the right place in the postgres directory (share / lib)
+/*
+The layout of the S3 bucket is as follows:
+5615610098 // this is an extension build number
+├── v14
+│   ├── extensions
+│   │   ├── anon.tar.zst
+│   │   └── embedding.tar.zst
+│   └── ext_index.json
+└── v15
+    ├── extensions
+    │   ├── anon.tar.zst
+    │   └── embedding.tar.zst
+    └── ext_index.json
+5615261079
+├── v14
+│   ├── extensions
+│   │   └── anon.tar.zst
+│   └── ext_index.json
+└── v15
+    ├── extensions
+    │   └── anon.tar.zst
+    └── ext_index.json
+5623261088
+├── v14
+│   ├── extensions
+│   │   └── embedding.tar.zst
+│   └── ext_index.json
+└── v15
+    ├── extensions
+    │   └── embedding.tar.zst
+    └── ext_index.json
+
+Note that build number cannot be part of prefix because we might need extensions
+from other build numbers.
+
+ext_index.json stores the control files and location of extension archives
+It also stores a list of public extensions and a library_index
+
+We don't need to duplicate extension.tar.zst files.
+We only need to upload a new one if it is updated.
+(Although currently we just upload every time anyways, hopefully will change
+this sometime)
+
+*access* is controlled by spec
+
+More specifically, here is an example ext_index.json
+{
+    "public_extensions": [
+        "anon",
+        "pg_buffercache"
+    ],
+    "library_index": {
+        "anon": "anon",
+        "pg_buffercache": "pg_buffercache"
+    },
+    "extension_data": {
+        "pg_buffercache": {
+            "control_data": {
+                "pg_buffercache.control": "# pg_buffercache extension \ncomment = 'examine the shared buffer cache' \ndefault_version = '1.3' \nmodule_pathname = '$libdir/pg_buffercache' \nrelocatable = true \ntrusted=true"
+            },
+            "archive_path": "5670669815/v14/extensions/pg_buffercache.tar.zst"
+        },
+        "anon": {
+            "control_data": {
+                "anon.control": "# PostgreSQL Anonymizer (anon) extension \ncomment = 'Data anonymization tools' \ndefault_version = '1.1.0' \ndirectory='extension/anon' \nrelocatable = false \nrequires = 'pgcrypto' \nsuperuser = false \nmodule_pathname = '$libdir/anon' \ntrusted = true \n"
+            },
+            "archive_path": "5670669815/v14/extensions/anon.tar.zst"
+        }
+    }
+}
+*/
+use anyhow::Context;
+use anyhow::{self, Result};
+use compute_api::spec::RemoteExtSpec;
+use regex::Regex;
+use remote_storage::*;
+use serde_json;
+use std::io::Read;
+use std::num::NonZeroUsize;
+use std::path::Path;
+use std::str;
+use tar::Archive;
+use tokio::io::AsyncReadExt;
+use tracing::info;
+use tracing::log::warn;
+use zstd::stream::read::Decoder;
+
+fn get_pg_config(argument: &str, pgbin: &str) -> String {
+    // gives the result of `pg_config [argument]`
+    // where argument is a flag like `--version` or `--sharedir`
+    let pgconfig = pgbin
+        .strip_suffix("postgres")
+        .expect("bad pgbin")
+        .to_owned()
+        + "/pg_config";
+    let config_output = std::process::Command::new(pgconfig)
+        .arg(argument)
+        .output()
+        .expect("pg_config error");
+    std::str::from_utf8(&config_output.stdout)
+        .expect("pg_config error")
+        .trim()
+        .to_string()
+}
+
+pub fn get_pg_version(pgbin: &str) -> String {
+    // pg_config --version returns a (platform specific) human readable string
+    // such as "PostgreSQL 15.4". We parse this to v14/v15/v16 etc.
+    let human_version = get_pg_config("--version", pgbin);
+    return parse_pg_version(&human_version).to_string();
+}
+
+fn parse_pg_version(human_version: &str) -> &str {
+    // Normal releases have version strings like "PostgreSQL 15.4". But there
+    // are also pre-release versions like "PostgreSQL 17devel" or "PostgreSQL
+    // 16beta2" or "PostgreSQL 17rc1". And with the --with-extra-version
+    // configure option, you can tack any string to the version number,
+    // e.g. "PostgreSQL 15.4foobar".
+    match Regex::new(r"^PostgreSQL (?<major>\d+).+")
+        .unwrap()
+        .captures(human_version)
+    {
+        Some(captures) if captures.len() == 2 => match &captures["major"] {
+            "14" => return "v14",
+            "15" => return "v15",
+            "16" => return "v16",
+            _ => {}
+        },
+        _ => {}
+    }
+    panic!("Unsuported postgres version {human_version}");
+}
+
+#[cfg(test)]
+mod tests {
+    use super::parse_pg_version;
+
+    #[test]
+    fn test_parse_pg_version() {
+        assert_eq!(parse_pg_version("PostgreSQL 15.4"), "v15");
+        assert_eq!(parse_pg_version("PostgreSQL 15.14"), "v15");
+        assert_eq!(
+            parse_pg_version("PostgreSQL 15.4 (Ubuntu 15.4-0ubuntu0.23.04.1)"),
+            "v15"
+        );
+
+        assert_eq!(parse_pg_version("PostgreSQL 14.15"), "v14");
+        assert_eq!(parse_pg_version("PostgreSQL 14.0"), "v14");
+        assert_eq!(
+            parse_pg_version("PostgreSQL 14.9 (Debian 14.9-1.pgdg120+1"),
+            "v14"
+        );
+
+        assert_eq!(parse_pg_version("PostgreSQL 16devel"), "v16");
+        assert_eq!(parse_pg_version("PostgreSQL 16beta1"), "v16");
+        assert_eq!(parse_pg_version("PostgreSQL 16rc2"), "v16");
+        assert_eq!(parse_pg_version("PostgreSQL 16extra"), "v16");
+    }
+
+    #[test]
+    #[should_panic]
+    fn test_parse_pg_unsupported_version() {
+        parse_pg_version("PostgreSQL 13.14");
+    }
+
+    #[test]
+    #[should_panic]
+    fn test_parse_pg_incorrect_version_format() {
+        parse_pg_version("PostgreSQL 14");
+    }
+}
+
+// download the archive for a given extension,
+// unzip it, and place files in the appropriate locations (share/lib)
+pub async fn download_extension(
+    ext_name: &str,
+    ext_path: &RemotePath,
+    remote_storage: &GenericRemoteStorage,
+    pgbin: &str,
+) -> Result<u64> {
+    info!("Download extension {:?} from {:?}", ext_name, ext_path);
+    let mut download = remote_storage.download(ext_path).await?;
+    let mut download_buffer = Vec::new();
+    download
+        .download_stream
+        .read_to_end(&mut download_buffer)
+        .await?;
+    let download_size = download_buffer.len() as u64;
+    // it's unclear whether it is more performant to decompress into memory or not
+    // TODO: decompressing into memory can be avoided
+    let mut decoder = Decoder::new(download_buffer.as_slice())?;
+    let mut decompress_buffer = Vec::new();
+    decoder.read_to_end(&mut decompress_buffer)?;
+    let mut archive = Archive::new(decompress_buffer.as_slice());
+    let unzip_dest = pgbin
+        .strip_suffix("/bin/postgres")
+        .expect("bad pgbin")
+        .to_string()
+        + "/download_extensions";
+    archive.unpack(&unzip_dest)?;
+    info!("Download + unzip {:?} completed successfully", &ext_path);
+
+    let sharedir_paths = (
+        unzip_dest.to_string() + "/share/extension",
+        Path::new(&get_pg_config("--sharedir", pgbin)).join("extension"),
+    );
+    let libdir_paths = (
+        unzip_dest.to_string() + "/lib",
+        Path::new(&get_pg_config("--pkglibdir", pgbin)).to_path_buf(),
+    );
+    // move contents of the libdir / sharedir in unzipped archive to the correct local paths
+    for paths in [sharedir_paths, libdir_paths] {
+        let (zip_dir, real_dir) = paths;
+        info!("mv {zip_dir:?}/*  {real_dir:?}");
+        for file in std::fs::read_dir(zip_dir)? {
+            let old_file = file?.path();
+            let new_file =
+                Path::new(&real_dir).join(old_file.file_name().context("error parsing file")?);
+            info!("moving {old_file:?} to {new_file:?}");
+
+            // extension download failed: Directory not empty (os error 39)
+            match std::fs::rename(old_file, new_file) {
+                Ok(()) => info!("move succeeded"),
+                Err(e) => {
+                    warn!("move failed, probably because the extension already exists: {e}")
+                }
+            }
+        }
+    }
+    info!("done moving extension {ext_name}");
+    Ok(download_size)
+}
+
+// Create extension control files from spec
+pub fn create_control_files(remote_extensions: &RemoteExtSpec, pgbin: &str) {
+    let local_sharedir = Path::new(&get_pg_config("--sharedir", pgbin)).join("extension");
+    for (ext_name, ext_data) in remote_extensions.extension_data.iter() {
+        // Check if extension is present in public or custom.
+        // If not, then it is not allowed to be used by this compute.
+        if let Some(public_extensions) = &remote_extensions.public_extensions {
+            if !public_extensions.contains(ext_name) {
+                if let Some(custom_extensions) = &remote_extensions.custom_extensions {
+                    if !custom_extensions.contains(ext_name) {
+                        continue; // skip this extension, it is not allowed
+                    }
+                }
+            }
+        }
+
+        for (control_name, control_content) in &ext_data.control_data {
+            let control_path = local_sharedir.join(control_name);
+            if !control_path.exists() {
+                info!("writing file {:?}{:?}", control_path, control_content);
+                std::fs::write(control_path, control_content).unwrap();
+            } else {
+                warn!("control file {:?} exists both locally and remotely. ignoring the remote version.", control_path);
+            }
+        }
+    }
+}
+
+// This function initializes the necessary structs to use remote storage
+pub fn init_remote_storage(remote_ext_config: &str) -> anyhow::Result<GenericRemoteStorage> {
+    #[derive(Debug, serde::Deserialize)]
+    struct RemoteExtJson {
+        bucket: String,
+        region: String,
+        endpoint: Option<String>,
+        prefix: Option<String>,
+    }
+    let remote_ext_json = serde_json::from_str::<RemoteExtJson>(remote_ext_config)?;
+
+    let config = S3Config {
+        bucket_name: remote_ext_json.bucket,
+        bucket_region: remote_ext_json.region,
+        prefix_in_bucket: remote_ext_json.prefix,
+        endpoint: remote_ext_json.endpoint,
+        concurrency_limit: NonZeroUsize::new(100).expect("100 != 0"),
+        max_keys_per_list_response: None,
+    };
+    let config = RemoteStorageConfig {
+        storage: RemoteStorageKind::AwsS3(config),
+    };
+    GenericRemoteStorage::from_config(&config)
+}

compute_tools/src/http/api.rs

@@ -0,0 +1,346 @@
+use std::convert::Infallible;
+use std::net::IpAddr;
+use std::net::Ipv6Addr;
+use std::net::SocketAddr;
+use std::sync::Arc;
+use std::thread;
+
+use crate::compute::{ComputeNode, ComputeState, ParsedSpec};
+use compute_api::requests::ConfigurationRequest;
+use compute_api::responses::{ComputeStatus, ComputeStatusResponse, GenericAPIError};
+
+use anyhow::Result;
+use hyper::service::{make_service_fn, service_fn};
+use hyper::{Body, Method, Request, Response, Server, StatusCode};
+use num_cpus;
+use serde_json;
+use tokio::task;
+use tracing::{error, info, warn};
+use tracing_utils::http::OtelName;
+
+fn status_response_from_state(state: &ComputeState) -> ComputeStatusResponse {
+    ComputeStatusResponse {
+        start_time: state.start_time,
+        tenant: state
+            .pspec
+            .as_ref()
+            .map(|pspec| pspec.tenant_id.to_string()),
+        timeline: state
+            .pspec
+            .as_ref()
+            .map(|pspec| pspec.timeline_id.to_string()),
+        status: state.status,
+        last_active: state.last_active,
+        error: state.error.clone(),
+    }
+}
+
+// Service function to handle all available routes.
+async fn routes(req: Request<Body>, compute: &Arc<ComputeNode>) -> Response<Body> {
+    //
+    // NOTE: The URI path is currently included in traces. That's OK because
+    // it doesn't contain any variable parts or sensitive information. But
+    // please keep that in mind if you change the routing here.
+    //
+    match (req.method(), req.uri().path()) {
+        // Serialized compute state.
+        (&Method::GET, "/status") => {
+            info!("serving /status GET request");
+            let state = compute.state.lock().unwrap();
+            let status_response = status_response_from_state(&state);
+            Response::new(Body::from(serde_json::to_string(&status_response).unwrap()))
+        }
+
+        // Startup metrics in JSON format. Keep /metrics reserved for a possible
+        // future use for Prometheus metrics format.
+        (&Method::GET, "/metrics.json") => {
+            info!("serving /metrics.json GET request");
+            let metrics = compute.state.lock().unwrap().metrics.clone();
+            Response::new(Body::from(serde_json::to_string(&metrics).unwrap()))
+        }
+
+        // Collect Postgres current usage insights
+        (&Method::GET, "/insights") => {
+            info!("serving /insights GET request");
+            let status = compute.get_status();
+            if status != ComputeStatus::Running {
+                let msg = format!("compute is not running, current status: {:?}", status);
+                error!(msg);
+                return Response::new(Body::from(msg));
+            }
+
+            let insights = compute.collect_insights().await;
+            Response::new(Body::from(insights))
+        }
+
+        (&Method::POST, "/check_writability") => {
+            info!("serving /check_writability POST request");
+            let status = compute.get_status();
+            if status != ComputeStatus::Running {
+                let msg = format!(
+                    "invalid compute status for check_writability request: {:?}",
+                    status
+                );
+                error!(msg);
+                return Response::new(Body::from(msg));
+            }
+
+            let res = crate::checker::check_writability(compute).await;
+            match res {
+                Ok(_) => Response::new(Body::from("true")),
+                Err(e) => {
+                    error!("check_writability failed: {}", e);
+                    Response::new(Body::from(e.to_string()))
+                }
+            }
+        }
+
+        (&Method::GET, "/info") => {
+            let num_cpus = num_cpus::get_physical();
+            info!("serving /info GET request. num_cpus: {}", num_cpus);
+            Response::new(Body::from(
+                serde_json::json!({
+                    "num_cpus": num_cpus,
+                })
+                .to_string(),
+            ))
+        }
+
+        // Accept spec in JSON format and request compute configuration. If
+        // anything goes wrong after we set the compute status to `ConfigurationPending`
+        // and update compute state with new spec, we basically leave compute
+        // in the potentially wrong state. That said, it's control-plane's
+        // responsibility to watch compute state after reconfiguration request
+        // and to clean restart in case of errors.
+        (&Method::POST, "/configure") => {
+            info!("serving /configure POST request");
+            match handle_configure_request(req, compute).await {
+                Ok(msg) => Response::new(Body::from(msg)),
+                Err((msg, code)) => {
+                    error!("error handling /configure request: {msg}");
+                    render_json_error(&msg, code)
+                }
+            }
+        }
+
+        // download extension files from S3 on demand
+        (&Method::POST, route) if route.starts_with("/extension_server/") => {
+            info!("serving {:?} POST request", route);
+            info!("req.uri {:?}", req.uri());
+
+            // don't even try to download extensions
+            // if no remote storage is configured
+            if compute.ext_remote_storage.is_none() {
+                info!("no extensions remote storage configured");
+                let mut resp = Response::new(Body::from("no remote storage configured"));
+                *resp.status_mut() = StatusCode::INTERNAL_SERVER_ERROR;
+                return resp;
+            }
+
+            let mut is_library = false;
+            if let Some(params) = req.uri().query() {
+                info!("serving {:?} POST request with params: {}", route, params);
+                if params == "is_library=true" {
+                    is_library = true;
+                } else {
+                    let mut resp = Response::new(Body::from("Wrong request parameters"));
+                    *resp.status_mut() = StatusCode::BAD_REQUEST;
+                    return resp;
+                }
+            }
+            let filename = route.split('/').last().unwrap().to_string();
+            info!("serving /extension_server POST request, filename: {filename:?} is_library: {is_library}");
+
+            // get ext_name and path from spec
+            // don't lock compute_state for too long
+            let ext = {
+                let compute_state = compute.state.lock().unwrap();
+                let pspec = compute_state.pspec.as_ref().expect("spec must be set");
+                let spec = &pspec.spec;
+
+                // debug only
+                info!("spec: {:?}", spec);
+
+                let remote_extensions = match spec.remote_extensions.as_ref() {
+                    Some(r) => r,
+                    None => {
+                        info!("no remote extensions spec was provided");
+                        let mut resp = Response::new(Body::from("no remote storage configured"));
+                        *resp.status_mut() = StatusCode::INTERNAL_SERVER_ERROR;
+                        return resp;
+                    }
+                };
+
+                remote_extensions.get_ext(
+                    &filename,
+                    is_library,
+                    &compute.build_tag,
+                    &compute.pgversion,
+                )
+            };
+
+            match ext {
+                Ok((ext_name, ext_path)) => {
+                    match compute.download_extension(ext_name, ext_path).await {
+                        Ok(_) => Response::new(Body::from("OK")),
+                        Err(e) => {
+                            error!("extension download failed: {}", e);
+                            let mut resp = Response::new(Body::from(e.to_string()));
+                            *resp.status_mut() = StatusCode::INTERNAL_SERVER_ERROR;
+                            resp
+                        }
+                    }
+                }
+                Err(e) => {
+                    warn!("extension download failed to find extension: {}", e);
+                    let mut resp = Response::new(Body::from("failed to find file"));
+                    *resp.status_mut() = StatusCode::INTERNAL_SERVER_ERROR;
+                    resp
+                }
+            }
+        }
+
+        // Return the `404 Not Found` for any other routes.
+        _ => {
+            let mut not_found = Response::new(Body::from("404 Not Found"));
+            *not_found.status_mut() = StatusCode::NOT_FOUND;
+            not_found
+        }
+    }
+}
+
+async fn handle_configure_request(
+    req: Request<Body>,
+    compute: &Arc<ComputeNode>,
+) -> Result<String, (String, StatusCode)> {
+    if !compute.live_config_allowed {
+        return Err((
+            "live configuration is not allowed for this compute node".to_string(),
+            StatusCode::PRECONDITION_FAILED,
+        ));
+    }
+
+    let body_bytes = hyper::body::to_bytes(req.into_body()).await.unwrap();
+    let spec_raw = String::from_utf8(body_bytes.to_vec()).unwrap();
+    if let Ok(request) = serde_json::from_str::<ConfigurationRequest>(&spec_raw) {
+        let spec = request.spec;
+
+        let parsed_spec = match ParsedSpec::try_from(spec) {
+            Ok(ps) => ps,
+            Err(msg) => return Err((msg, StatusCode::PRECONDITION_FAILED)),
+        };
+
+        // XXX: wrap state update under lock in code blocks. Otherwise,
+        // we will try to `Send` `mut state` into the spawned thread
+        // bellow, which will cause error:
+        // ```
+        // error: future cannot be sent between threads safely
+        // ```
+        {
+            let mut state = compute.state.lock().unwrap();
+            if state.status != ComputeStatus::Empty && state.status != ComputeStatus::Running {
+                let msg = format!(
+                    "invalid compute status for configuration request: {:?}",
+                    state.status.clone()
+                );
+                return Err((msg, StatusCode::PRECONDITION_FAILED));
+            }
+            state.pspec = Some(parsed_spec);
+            state.status = ComputeStatus::ConfigurationPending;
+            compute.state_changed.notify_all();
+            drop(state);
+            info!("set new spec and notified waiters");
+        }
+
+        // Spawn a blocking thread to wait for compute to become Running.
+        // This is needed to do not block the main pool of workers and
+        // be able to serve other requests while some particular request
+        // is waiting for compute to finish configuration.
+        let c = compute.clone();
+        task::spawn_blocking(move || {
+            let mut state = c.state.lock().unwrap();
+            while state.status != ComputeStatus::Running {
+                state = c.state_changed.wait(state).unwrap();
+                info!(
+                    "waiting for compute to become Running, current status: {:?}",
+                    state.status
+                );
+
+                if state.status == ComputeStatus::Failed {
+                    let err = state.error.as_ref().map_or("unknown error", |x| x);
+                    let msg = format!("compute configuration failed: {:?}", err);
+                    return Err((msg, StatusCode::INTERNAL_SERVER_ERROR));
+                }
+            }
+
+            Ok(())
+        })
+        .await
+        .unwrap()?;
+
+        // Return current compute state if everything went well.
+        let state = compute.state.lock().unwrap().clone();
+        let status_response = status_response_from_state(&state);
+        Ok(serde_json::to_string(&status_response).unwrap())
+    } else {
+        Err(("invalid spec".to_string(), StatusCode::BAD_REQUEST))
+    }
+}
+
+fn render_json_error(e: &str, status: StatusCode) -> Response<Body> {
+    let error = GenericAPIError {
+        error: e.to_string(),
+    };
+    Response::builder()
+        .status(status)
+        .body(Body::from(serde_json::to_string(&error).unwrap()))
+        .unwrap()
+}
+
+// Main Hyper HTTP server function that runs it and blocks waiting on it forever.
+#[tokio::main]
+async fn serve(port: u16, state: Arc<ComputeNode>) {
+    // this usually binds to both IPv4 and IPv6 on linux
+    // see e.g. https://github.com/rust-lang/rust/pull/34440
+    let addr = SocketAddr::new(IpAddr::from(Ipv6Addr::UNSPECIFIED), port);
+
+    let make_service = make_service_fn(move |_conn| {
+        let state = state.clone();
+        async move {
+            Ok::<_, Infallible>(service_fn(move |req: Request<Body>| {
+                let state = state.clone();
+                async move {
+                    Ok::<_, Infallible>(
+                        // NOTE: We include the URI path in the string. It
+                        // doesn't contain any variable parts or sensitive
+                        // information in this API.
+                        tracing_utils::http::tracing_handler(
+                            req,
+                            |req| routes(req, &state),
+                            OtelName::UriPath,
+                        )
+                        .await,
+                    )
+                }
+            }))
+        }
+    });
+
+    info!("starting HTTP server on {}", addr);
+
+    let server = Server::bind(&addr).serve(make_service);
+
+    // Run this server forever
+    if let Err(e) = server.await {
+        error!("server error: {}", e);
+    }
+}
+
+/// Launch a separate Hyper HTTP API server thread and return its `JoinHandle`.
+pub fn launch_http_server(port: u16, state: &Arc<ComputeNode>) -> Result<thread::JoinHandle<()>> {
+    let state = Arc::clone(state);
+
+    Ok(thread::Builder::new()
+        .name("http-endpoint".into())
+        .spawn(move || serve(port, state))?)
+}

compute_tools/src/http/mod.rs

@@ -0,0 +1 @@
+pub mod api;

compute_tools/src/http/openapi_spec.yaml

@@ -0,0 +1,276 @@
+openapi: "3.0.2"
+info:
+  title: Compute node control API
+  version: "1.0"
+
+servers:
+  - url: "http://localhost:3080"
+
+paths:
+  /status:
+    get:
+      tags:
+      - Info
+      summary: Get compute node internal status.
+      description: ""
+      operationId: getComputeStatus
+      responses:
+        200:
+          description: ComputeState
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/ComputeState"
+
+  /metrics.json:
+    get:
+      tags:
+      - Info
+      summary: Get compute node startup metrics in JSON format.
+      description: ""
+      operationId: getComputeMetricsJSON
+      responses:
+        200:
+          description: ComputeMetrics
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/ComputeMetrics"
+
+  /insights:
+    get:
+      tags:
+      - Info
+      summary: Get current compute insights in JSON format.
+      description: |
+        Note, that this doesn't include any historical data.
+      operationId: getComputeInsights
+      responses:
+        200:
+          description: Compute insights
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/ComputeInsights"
+
+  /info:
+    get:
+      tags:
+      - Info
+      summary: Get info about the compute pod / VM.
+      description: ""
+      operationId: getInfo
+      responses:
+        200:
+          description: Info
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/Info"
+
+  /check_writability:
+    post:
+      tags:
+      - Check
+      summary: Check that we can write new data on this compute.
+      description: ""
+      operationId: checkComputeWritability
+      responses:
+        200:
+          description: Check result
+          content:
+            text/plain:
+              schema:
+                type: string
+                description: Error text or 'true' if check passed.
+                example: "true"
+
+  /configure:
+    post:
+      tags:
+      - Configure
+      summary: Perform compute node configuration.
+      description: |
+        This is a blocking API endpoint, i.e. it blocks waiting until
+        compute is finished configuration and is in `Running` state.
+        Optional non-blocking mode could be added later.
+      operationId: configureCompute
+      requestBody:
+        description: Configuration request.
+        required: true
+        content:
+          application/json:
+            schema:
+              type: object
+              required:
+                - spec
+              properties:
+                spec:
+                  # XXX: I don't want to explain current spec in the OpenAPI format,
+                  # as it could be changed really soon. Consider doing it later.
+                  type: object
+      responses:
+        200:
+          description: Compute configuration finished.
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/ComputeState"
+        400:
+          description: Provided spec is invalid.
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/GenericError"
+        412:
+          description: |
+            It's not possible to do live-configuration of the compute.
+            It's either in the wrong state, or compute doesn't use pull
+            mode of configuration.
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/GenericError"
+        500:
+          description: |
+            Compute configuration request was processed, but error
+            occurred. Compute will likely shutdown soon.
+          content:
+            application/json:
+              schema:
+                $ref: "#/components/schemas/GenericError"
+  /extension_server:
+    post:
+      tags:
+      - Extension
+      summary: Download extension from S3 to local folder.
+      description: ""
+      operationId: downloadExtension
+      responses:
+        200:
+          description: Extension downloaded
+          content:
+            text/plain:
+              schema:
+                type: string
+                description: Error text or 'OK' if download succeeded.
+                example: "OK"
+        400:
+        description: Request is invalid.
+        content:
+          application/json:
+            schema:
+              $ref: "#/components/schemas/GenericError"
+        500:
+        description: Extension download request failed.
+        content:
+          application/json:
+            schema:
+              $ref: "#/components/schemas/GenericError"
+
+components:
+  securitySchemes:
+    JWT:
+      type: http
+      scheme: bearer
+      bearerFormat: JWT
+
+  schemas:
+    ComputeMetrics:
+      type: object
+      description: Compute startup metrics.
+      required:
+        - wait_for_spec_ms
+        - sync_safekeepers_ms
+        - basebackup_ms
+        - config_ms
+        - total_startup_ms
+      properties:
+        wait_for_spec_ms:
+          type: integer
+        sync_safekeepers_ms:
+          type: integer
+        basebackup_ms:
+          type: integer
+        config_ms:
+          type: integer
+        total_startup_ms:
+          type: integer
+
+    Info:
+      type: object
+      description: Information about VM/Pod.
+      required:
+        - num_cpus
+      properties:
+        num_cpus:
+          type: integer
+
+    ComputeState:
+      type: object
+      required:
+        - start_time
+        - status
+      properties:
+        start_time:
+          type: string
+          description: |
+            Time when compute was started. If initially compute was started in the `empty`
+            state and then provided with valid spec, `start_time` will be reset to the
+            moment, when spec was received.
+          example: "2022-10-12T07:20:50.52Z"
+        status:
+          $ref: '#/components/schemas/ComputeStatus'
+        last_active:
+          type: string
+          description: |
+            The last detected compute activity timestamp in UTC and RFC3339 format.
+            It could be empty if compute was never used by user since start.
+          example: "2022-10-12T07:20:50.52Z"
+        error:
+          type: string
+          description: Text of the error during compute startup or reconfiguration, if any.
+          example: ""
+        tenant:
+          type: string
+          description: Identifier of the current tenant served by compute node, if any.
+          example: c9269c359e9a199fad1ea0981246a78f
+        timeline:
+          type: string
+          description: Identifier of the current timeline served by compute node, if any.
+          example: ece7de74d4b8cbe5433a68ce4d1b97b4
+
+    ComputeInsights:
+      type: object
+      properties:
+        pg_stat_statements:
+          description: Contains raw output from pg_stat_statements in JSON format.
+          type: array
+          items:
+            type: object
+
+    ComputeStatus:
+      type: string
+      enum:
+        - empty
+        - init
+        - failed
+        - running
+        - configuration_pending
+        - configuration
+      example: running
+
+    #
+    # Errors
+    #
+
+    GenericError:
+      type: object
+      required:
+        - error
+      properties:
+        error:
+          type: string
+
+security:
+  - JWT: []

compute_tools/src/lib.rs

@@ -0,0 +1,17 @@
+//! Various tools and helpers to handle cluster / compute node (Postgres)
+//! configuration.
+#![deny(unsafe_code)]
+#![deny(clippy::undocumented_unsafe_blocks)]
+pub mod checker;
+pub mod config;
+pub mod configurator;
+pub mod http;
+#[macro_use]
+pub mod logger;
+pub mod compute;
+pub mod extension_server;
+pub mod monitor;
+pub mod params;
+pub mod pg_helpers;
+pub mod spec;
+pub mod sync_sk;

compute_tools/src/logger.rs

@@ -0,0 +1,40 @@
+use tracing_opentelemetry::OpenTelemetryLayer;
+use tracing_subscriber::layer::SubscriberExt;
+use tracing_subscriber::prelude::*;
+
+/// Initialize logging to stderr, and OpenTelemetry tracing and exporter.
+///
+/// Logging is configured using either `default_log_level` or
+/// `RUST_LOG` environment variable as default log level.
+///
+/// OpenTelemetry is configured with OTLP/HTTP exporter. It picks up
+/// configuration from environment variables. For example, to change the destination,
+/// set `OTEL_EXPORTER_OTLP_ENDPOINT=http://jaeger:4318`. See
+/// `tracing-utils` package description.
+///
+pub fn init_tracing_and_logging(default_log_level: &str) -> anyhow::Result<()> {
+    // Initialize Logging
+    let env_filter = tracing_subscriber::EnvFilter::try_from_default_env()
+        .unwrap_or_else(|_| tracing_subscriber::EnvFilter::new(default_log_level));
+
+    let fmt_layer = tracing_subscriber::fmt::layer()
+        .with_ansi(false)
+        .with_target(false)
+        .with_writer(std::io::stderr);
+
+    // Initialize OpenTelemetry
+    let otlp_layer =
+        tracing_utils::init_tracing_without_runtime("compute_ctl").map(OpenTelemetryLayer::new);
+
+    // Put it all together
+    tracing_subscriber::registry()
+        .with(env_filter)
+        .with(otlp_layer)
+        .with(fmt_layer)
+        .init();
+    tracing::info!("logging and tracing started");
+
+    utils::logging::replace_panic_hook_with_tracing_panic_hook().forget();
+
+    Ok(())
+}

compute_tools/src/monitor.rs

@@ -0,0 +1,113 @@
+use std::sync::Arc;
+use std::{thread, time::Duration};
+
+use chrono::{DateTime, Utc};
+use postgres::{Client, NoTls};
+use tracing::{debug, info};
+
+use crate::compute::ComputeNode;
+
+const MONITOR_CHECK_INTERVAL: Duration = Duration::from_millis(500);
+
+// Spin in a loop and figure out the last activity time in the Postgres.
+// Then update it in the shared state. This function never errors out.
+// XXX: the only expected panic is at `RwLock` unwrap().
+fn watch_compute_activity(compute: &ComputeNode) {
+    // Suppose that `connstr` doesn't change
+    let connstr = compute.connstr.as_str();
+    // Define `client` outside of the loop to reuse existing connection if it's active.
+    let mut client = Client::connect(connstr, NoTls);
+
+    info!("watching Postgres activity at {}", connstr);
+
+    loop {
+        // Should be outside of the write lock to allow others to read while we sleep.
+        thread::sleep(MONITOR_CHECK_INTERVAL);
+
+        match &mut client {
+            Ok(cli) => {
+                if cli.is_closed() {
+                    info!("connection to postgres closed, trying to reconnect");
+
+                    // Connection is closed, reconnect and try again.
+                    client = Client::connect(connstr, NoTls);
+                    continue;
+                }
+
+                // Get all running client backends except ourself, use RFC3339 DateTime format.
+                let backends = cli
+                    .query(
+                        "SELECT state, to_char(state_change, 'YYYY-MM-DD\"T\"HH24:MI:SS.US\"Z\"') AS state_change
+                         FROM pg_stat_activity
+                         WHERE backend_type = 'client backend'
+                            AND pid != pg_backend_pid()
+                            AND usename != 'cloud_admin';", // XXX: find a better way to filter other monitors?
+                        &[],
+                    );
+                let mut last_active = compute.state.lock().unwrap().last_active;
+
+                if let Ok(backs) = backends {
+                    let mut idle_backs: Vec<DateTime<Utc>> = vec![];
+
+                    for b in backs.into_iter() {
+                        let state: String = match b.try_get("state") {
+                            Ok(state) => state,
+                            Err(_) => continue,
+                        };
+
+                        if state == "idle" {
+                            let change: String = match b.try_get("state_change") {
+                                Ok(state_change) => state_change,
+                                Err(_) => continue,
+                            };
+                            let change = DateTime::parse_from_rfc3339(&change);
+                            match change {
+                                Ok(t) => idle_backs.push(t.with_timezone(&Utc)),
+                                Err(e) => {
+                                    info!("cannot parse backend state_change DateTime: {}", e);
+                                    continue;
+                                }
+                            }
+                        } else {
+                            // Found non-idle backend, so the last activity is NOW.
+                            // Save it and exit the for loop. Also clear the idle backend
+                            // `state_change` timestamps array as it doesn't matter now.
+                            last_active = Some(Utc::now());
+                            idle_backs.clear();
+                            break;
+                        }
+                    }
+
+                    // Get idle backend `state_change` with the max timestamp.
+                    if let Some(last) = idle_backs.iter().max() {
+                        last_active = Some(*last);
+                    }
+                }
+
+                // Update the last activity in the shared state if we got a more recent one.
+                let mut state = compute.state.lock().unwrap();
+                // NB: `Some(<DateTime>)` is always greater than `None`.
+                if last_active > state.last_active {
+                    state.last_active = last_active;
+                    debug!("set the last compute activity time to: {:?}", last_active);
+                }
+            }
+            Err(e) => {
+                debug!("cannot connect to postgres: {}, retrying", e);
+
+                // Establish a new connection and try again.
+                client = Client::connect(connstr, NoTls);
+            }
+        }
+    }
+}
+
+/// Launch a separate compute monitor thread and return its `JoinHandle`.
+pub fn launch_monitor(state: &Arc<ComputeNode>) -> thread::JoinHandle<()> {
+    let state = Arc::clone(state);
+
+    thread::Builder::new()
+        .name("compute-monitor".into())
+        .spawn(move || watch_compute_activity(&state))
+        .expect("cannot launch compute monitor thread")
+}

compute_tools/src/params.rs

@@ -0,0 +1,9 @@
+pub const DEFAULT_LOG_LEVEL: &str = "info";
+// From Postgres docs:
+//   To ease transition from the md5 method to the newer SCRAM method, if md5 is specified
+//   as a method in pg_hba.conf but the user's password on the server is encrypted for SCRAM
+//   (see below), then SCRAM-based authentication will automatically be chosen instead.
+//   https://www.postgresql.org/docs/15/auth-password.html
+//
+// So it's safe to set md5 here, as `control-plane` anyway uses SCRAM for all roles.
+pub const PG_HBA_ALL_MD5: &str = "host\tall\t\tall\t\tall\t\tmd5";

compute_tools/src/pg_helpers.rs

@@ -0,0 +1,366 @@
+use std::collections::HashMap;
+use std::fmt::Write;
+use std::fs;
+use std::fs::File;
+use std::io::{BufRead, BufReader};
+use std::os::unix::fs::PermissionsExt;
+use std::path::Path;
+use std::process::Child;
+use std::time::{Duration, Instant};
+
+use anyhow::{bail, Result};
+use notify::{RecursiveMode, Watcher};
+use postgres::{Client, Transaction};
+use tracing::{debug, instrument};
+
+use compute_api::spec::{Database, GenericOption, GenericOptions, PgIdent, Role};
+
+const POSTGRES_WAIT_TIMEOUT: Duration = Duration::from_millis(60 * 1000); // milliseconds
+
+/// Escape a string for including it in a SQL literal. Wrapping the result
+/// with `E'{}'` or `'{}'` is not required, as it returns a ready-to-use
+/// SQL string literal, e.g. `'db'''` or `E'db\\'`.
+/// See <https://github.com/postgres/postgres/blob/da98d005cdbcd45af563d0c4ac86d0e9772cd15f/src/backend/utils/adt/quote.c#L47>
+/// for the original implementation.
+pub fn escape_literal(s: &str) -> String {
+    let res = s.replace('\'', "''").replace('\\', "\\\\");
+
+    if res.contains('\\') {
+        format!("E'{}'", res)
+    } else {
+        format!("'{}'", res)
+    }
+}
+
+/// Escape a string so that it can be used in postgresql.conf. Wrapping the result
+/// with `'{}'` is not required, as it returns a ready-to-use config string.
+pub fn escape_conf_value(s: &str) -> String {
+    let res = s.replace('\'', "''").replace('\\', "\\\\");
+    format!("'{}'", res)
+}
+
+trait GenericOptionExt {
+    fn to_pg_option(&self) -> String;
+    fn to_pg_setting(&self) -> String;
+}
+
+impl GenericOptionExt for GenericOption {
+    /// Represent `GenericOption` as SQL statement parameter.
+    fn to_pg_option(&self) -> String {
+        if let Some(val) = &self.value {
+            match self.vartype.as_ref() {
+                "string" => format!("{} {}", self.name, escape_literal(val)),
+                _ => format!("{} {}", self.name, val),
+            }
+        } else {
+            self.name.to_owned()
+        }
+    }
+
+    /// Represent `GenericOption` as configuration option.
+    fn to_pg_setting(&self) -> String {
+        if let Some(val) = &self.value {
+            match self.vartype.as_ref() {
+                "string" => format!("{} = {}", self.name, escape_conf_value(val)),
+                _ => format!("{} = {}", self.name, val),
+            }
+        } else {
+            self.name.to_owned()
+        }
+    }
+}
+
+pub trait PgOptionsSerialize {
+    fn as_pg_options(&self) -> String;
+    fn as_pg_settings(&self) -> String;
+}
+
+impl PgOptionsSerialize for GenericOptions {
+    /// Serialize an optional collection of `GenericOption`'s to
+    /// Postgres SQL statement arguments.
+    fn as_pg_options(&self) -> String {
+        if let Some(ops) = &self {
+            ops.iter()
+                .map(|op| op.to_pg_option())
+                .collect::<Vec<String>>()
+                .join(" ")
+        } else {
+            "".to_string()
+        }
+    }
+
+    /// Serialize an optional collection of `GenericOption`'s to
+    /// `postgresql.conf` compatible format.
+    fn as_pg_settings(&self) -> String {
+        if let Some(ops) = &self {
+            ops.iter()
+                .map(|op| op.to_pg_setting())
+                .collect::<Vec<String>>()
+                .join("\n")
+                + "\n" // newline after last setting
+        } else {
+            "".to_string()
+        }
+    }
+}
+
+pub trait GenericOptionsSearch {
+    fn find(&self, name: &str) -> Option<String>;
+    fn find_ref(&self, name: &str) -> Option<&GenericOption>;
+}
+
+impl GenericOptionsSearch for GenericOptions {
+    /// Lookup option by name
+    fn find(&self, name: &str) -> Option<String> {
+        let ops = self.as_ref()?;
+        let op = ops.iter().find(|s| s.name == name)?;
+        op.value.clone()
+    }
+
+    /// Lookup option by name, returning ref
+    fn find_ref(&self, name: &str) -> Option<&GenericOption> {
+        let ops = self.as_ref()?;
+        ops.iter().find(|s| s.name == name)
+    }
+}
+
+pub trait RoleExt {
+    fn to_pg_options(&self) -> String;
+}
+
+impl RoleExt for Role {
+    /// Serialize a list of role parameters into a Postgres-acceptable
+    /// string of arguments.
+    fn to_pg_options(&self) -> String {
+        // XXX: consider putting LOGIN as a default option somewhere higher, e.g. in control-plane.
+        let mut params: String = self.options.as_pg_options();
+        params.push_str(" LOGIN");
+
+        if let Some(pass) = &self.encrypted_password {
+            // Some time ago we supported only md5 and treated all encrypted_password as md5.
+            // Now we also support SCRAM-SHA-256 and to preserve compatibility
+            // we treat all encrypted_password as md5 unless they starts with SCRAM-SHA-256.
+            if pass.starts_with("SCRAM-SHA-256") {
+                write!(params, " PASSWORD '{pass}'")
+                    .expect("String is documented to not to error during write operations");
+            } else {
+                write!(params, " PASSWORD 'md5{pass}'")
+                    .expect("String is documented to not to error during write operations");
+            }
+        } else {
+            params.push_str(" PASSWORD NULL");
+        }
+
+        params
+    }
+}
+
+pub trait DatabaseExt {
+    fn to_pg_options(&self) -> String;
+}
+
+impl DatabaseExt for Database {
+    /// Serialize a list of database parameters into a Postgres-acceptable
+    /// string of arguments.
+    /// NB: `TEMPLATE` is actually also an identifier, but so far we only need
+    /// to use `template0` and `template1`, so it is not a problem. Yet in the future
+    /// it may require a proper quoting too.
+    fn to_pg_options(&self) -> String {
+        let mut params: String = self.options.as_pg_options();
+        write!(params, " OWNER {}", &self.owner.pg_quote())
+            .expect("String is documented to not to error during write operations");
+
+        params
+    }
+}
+
+/// Generic trait used to provide quoting / encoding for strings used in the
+/// Postgres SQL queries and DATABASE_URL.
+pub trait Escaping {
+    fn pg_quote(&self) -> String;
+}
+
+impl Escaping for PgIdent {
+    /// This is intended to mimic Postgres quote_ident(), but for simplicity it
+    /// always quotes provided string with `""` and escapes every `"`.
+    /// **Not idempotent**, i.e. if string is already escaped it will be escaped again.
+    fn pg_quote(&self) -> String {
+        let result = format!("\"{}\"", self.replace('"', "\"\""));
+        result
+    }
+}
+
+/// Build a list of existing Postgres roles
+pub fn get_existing_roles(xact: &mut Transaction<'_>) -> Result<Vec<Role>> {
+    let postgres_roles = xact
+        .query(
+            "SELECT rolname, rolpassword, rolreplication, rolbypassrls FROM pg_catalog.pg_authid",
+            &[],
+        )?
+        .iter()
+        .map(|row| Role {
+            name: row.get("rolname"),
+            encrypted_password: row.get("rolpassword"),
+            replication: Some(row.get("rolreplication")),
+            bypassrls: Some(row.get("rolbypassrls")),
+            options: None,
+        })
+        .collect();
+
+    Ok(postgres_roles)
+}
+
+/// Build a list of existing Postgres databases
+pub fn get_existing_dbs(client: &mut Client) -> Result<HashMap<String, Database>> {
+    // `pg_database.datconnlimit = -2` means that the database is in the
+    // invalid state. See:
+    //   https://github.com/postgres/postgres/commit/a4b4cc1d60f7e8ccfcc8ff8cb80c28ee411ad9a9
+    let postgres_dbs: Vec<Database> = client
+        .query(
+            "SELECT
+                datname AS name,
+                datdba::regrole::text AS owner,
+                NOT datallowconn AS restrict_conn,
+                datconnlimit = - 2 AS invalid
+            FROM
+                pg_catalog.pg_database;",
+            &[],
+        )?
+        .iter()
+        .map(|row| Database {
+            name: row.get("name"),
+            owner: row.get("owner"),
+            restrict_conn: row.get("restrict_conn"),
+            invalid: row.get("invalid"),
+            options: None,
+        })
+        .collect();
+
+    let dbs_map = postgres_dbs
+        .iter()
+        .map(|db| (db.name.clone(), db.clone()))
+        .collect::<HashMap<_, _>>();
+
+    Ok(dbs_map)
+}
+
+/// Wait for Postgres to become ready to accept connections. It's ready to
+/// accept connections when the state-field in `pgdata/postmaster.pid` says
+/// 'ready'.
+#[instrument(skip_all, fields(pgdata = %pgdata.display()))]
+pub fn wait_for_postgres(pg: &mut Child, pgdata: &Path) -> Result<()> {
+    let pid_path = pgdata.join("postmaster.pid");
+
+    // PostgreSQL writes line "ready" to the postmaster.pid file, when it has
+    // completed initialization and is ready to accept connections. We want to
+    // react quickly and perform the rest of our initialization as soon as
+    // PostgreSQL starts accepting connections. Use 'notify' to be notified
+    // whenever the PID file is changed, and whenever it changes, read it to
+    // check if it's now "ready".
+    //
+    // You cannot actually watch a file before it exists, so we first watch the
+    // data directory, and once the postmaster.pid file appears, we switch to
+    // watch the file instead. We also wake up every 100 ms to poll, just in
+    // case we miss some events for some reason. Not strictly necessary, but
+    // better safe than sorry.
+    let (tx, rx) = std::sync::mpsc::channel();
+    let (mut watcher, rx): (Box<dyn Watcher>, _) = match notify::recommended_watcher(move |res| {
+        let _ = tx.send(res);
+    }) {
+        Ok(watcher) => (Box::new(watcher), rx),
+        Err(e) => {
+            match e.kind {
+                notify::ErrorKind::Io(os) if os.raw_os_error() == Some(38) => {
+                    // docker on m1 macs does not support recommended_watcher
+                    // but return "Function not implemented (os error 38)"
+                    // see https://github.com/notify-rs/notify/issues/423
+                    let (tx, rx) = std::sync::mpsc::channel();
+
+                    // let's poll it faster than what we check the results for (100ms)
+                    let config =
+                        notify::Config::default().with_poll_interval(Duration::from_millis(50));
+
+                    let watcher = notify::PollWatcher::new(
+                        move |res| {
+                            let _ = tx.send(res);
+                        },
+                        config,
+                    )?;
+
+                    (Box::new(watcher), rx)
+                }
+                _ => return Err(e.into()),
+            }
+        }
+    };
+
+    watcher.watch(pgdata, RecursiveMode::NonRecursive)?;
+
+    let started_at = Instant::now();
+    let mut postmaster_pid_seen = false;
+    loop {
+        if let Ok(Some(status)) = pg.try_wait() {
+            // Postgres exited, that is not what we expected, bail out earlier.
+            let code = status.code().unwrap_or(-1);
+            bail!("Postgres exited unexpectedly with code {}", code);
+        }
+
+        let res = rx.recv_timeout(Duration::from_millis(100));
+        debug!("woken up by notify: {res:?}");
+        // If there are multiple events in the channel already, we only need to be
+        // check once. Swallow the extra events before we go ahead to check the
+        // pid file.
+        while let Ok(res) = rx.try_recv() {
+            debug!("swallowing extra event: {res:?}");
+        }
+
+        // Check that we can open pid file first.
+        if let Ok(file) = File::open(&pid_path) {
+            if !postmaster_pid_seen {
+                debug!("postmaster.pid appeared");
+                watcher
+                    .unwatch(pgdata)
+                    .expect("Failed to remove pgdata dir watch");
+                watcher
+                    .watch(&pid_path, RecursiveMode::NonRecursive)
+                    .expect("Failed to add postmaster.pid file watch");
+                postmaster_pid_seen = true;
+            }
+
+            let file = BufReader::new(file);
+            let last_line = file.lines().last();
+
+            // Pid file could be there and we could read it, but it could be empty, for example.
+            if let Some(Ok(line)) = last_line {
+                let status = line.trim();
+                debug!("last line of postmaster.pid: {status:?}");
+
+                // Now Postgres is ready to accept connections
+                if status == "ready" {
+                    break;
+                }
+            }
+        }
+
+        // Give up after POSTGRES_WAIT_TIMEOUT.
+        let duration = started_at.elapsed();
+        if duration >= POSTGRES_WAIT_TIMEOUT {
+            bail!("timed out while waiting for Postgres to start");
+        }
+    }
+
+    tracing::info!("PostgreSQL is now running, continuing to configure it");
+
+    Ok(())
+}
+
+/// Remove `pgdata` directory and create it again with right permissions.
+pub fn create_pgdata(pgdata: &str) -> Result<()> {
+    // Ignore removal error, likely it is a 'No such file or directory (os error 2)'.
+    // If it is something different then create_dir() will error out anyway.
+    let _ok = fs::remove_dir_all(pgdata);
+    fs::create_dir(pgdata)?;
+    fs::set_permissions(pgdata, fs::Permissions::from_mode(0o700))?;
+
+    Ok(())
+}

compute_tools/src/spec.rs

@@ -0,0 +1,676 @@
+use std::fs::File;
+use std::path::Path;
+use std::str::FromStr;
+
+use anyhow::{anyhow, bail, Result};
+use postgres::config::Config;
+use postgres::{Client, NoTls};
+use reqwest::StatusCode;
+use tracing::{error, info, info_span, instrument, span_enabled, warn, Level};
+
+use crate::config;
+use crate::params::PG_HBA_ALL_MD5;
+use crate::pg_helpers::*;
+
+use compute_api::responses::{ControlPlaneComputeStatus, ControlPlaneSpecResponse};
+use compute_api::spec::{ComputeSpec, PgIdent, Role};
+
+// Do control plane request and return response if any. In case of error it
+// returns a bool flag indicating whether it makes sense to retry the request
+// and a string with error message.
+fn do_control_plane_request(
+    uri: &str,
+    jwt: &str,
+) -> Result<ControlPlaneSpecResponse, (bool, String)> {
+    let resp = reqwest::blocking::Client::new()
+        .get(uri)
+        .header("Authorization", format!("Bearer {}", jwt))
+        .send()
+        .map_err(|e| {
+            (
+                true,
+                format!("could not perform spec request to control plane: {}", e),
+            )
+        })?;
+
+    match resp.status() {
+        StatusCode::OK => match resp.json::<ControlPlaneSpecResponse>() {
+            Ok(spec_resp) => Ok(spec_resp),
+            Err(e) => Err((
+                true,
+                format!("could not deserialize control plane response: {}", e),
+            )),
+        },
+        StatusCode::SERVICE_UNAVAILABLE => {
+            Err((true, "control plane is temporarily unavailable".to_string()))
+        }
+        StatusCode::BAD_GATEWAY => {
+            // We have a problem with intermittent 502 errors now
+            // https://github.com/neondatabase/cloud/issues/2353
+            // It's fine to retry GET request in this case.
+            Err((true, "control plane request failed with 502".to_string()))
+        }
+        // Another code, likely 500 or 404, means that compute is unknown to the control plane
+        // or some internal failure happened. Doesn't make much sense to retry in this case.
+        _ => Err((
+            false,
+            format!(
+                "unexpected control plane response status code: {}",
+                resp.status()
+            ),
+        )),
+    }
+}
+
+/// Request spec from the control-plane by compute_id. If `NEON_CONTROL_PLANE_TOKEN`
+/// env variable is set, it will be used for authorization.
+pub fn get_spec_from_control_plane(
+    base_uri: &str,
+    compute_id: &str,
+) -> Result<Option<ComputeSpec>> {
+    let cp_uri = format!("{base_uri}/compute/api/v2/computes/{compute_id}/spec");
+    let jwt: String = match std::env::var("NEON_CONTROL_PLANE_TOKEN") {
+        Ok(v) => v,
+        Err(_) => "".to_string(),
+    };
+    let mut attempt = 1;
+    let mut spec: Result<Option<ComputeSpec>> = Ok(None);
+
+    info!("getting spec from control plane: {}", cp_uri);
+
+    // Do 3 attempts to get spec from the control plane using the following logic:
+    // - network error -> then retry
+    // - compute id is unknown or any other error -> bail out
+    // - no spec for compute yet (Empty state) -> return Ok(None)
+    // - got spec -> return Ok(Some(spec))
+    while attempt < 4 {
+        spec = match do_control_plane_request(&cp_uri, &jwt) {
+            Ok(spec_resp) => match spec_resp.status {
+                ControlPlaneComputeStatus::Empty => Ok(None),
+                ControlPlaneComputeStatus::Attached => {
+                    if let Some(spec) = spec_resp.spec {
+                        Ok(Some(spec))
+                    } else {
+                        bail!("compute is attached, but spec is empty")
+                    }
+                }
+            },
+            Err((retry, msg)) => {
+                if retry {
+                    Err(anyhow!(msg))
+                } else {
+                    bail!(msg);
+                }
+            }
+        };
+
+        if let Err(e) = &spec {
+            error!("attempt {} to get spec failed with: {}", attempt, e);
+        } else {
+            return spec;
+        }
+
+        attempt += 1;
+        std::thread::sleep(std::time::Duration::from_millis(100));
+    }
+
+    // All attempts failed, return error.
+    spec
+}
+
+/// It takes cluster specification and does the following:
+/// - Serialize cluster config and put it into `postgresql.conf` completely rewriting the file.
+/// - Update `pg_hba.conf` to allow external connections.
+pub fn handle_configuration(spec: &ComputeSpec, pgdata_path: &Path) -> Result<()> {
+    // File `postgresql.conf` is no longer included into `basebackup`, so just
+    // always write all config into it creating new file.
+    config::write_postgres_conf(&pgdata_path.join("postgresql.conf"), spec, None)?;
+
+    update_pg_hba(pgdata_path)?;
+
+    Ok(())
+}
+
+/// Check `pg_hba.conf` and update if needed to allow external connections.
+pub fn update_pg_hba(pgdata_path: &Path) -> Result<()> {
+    // XXX: consider making it a part of spec.json
+    info!("checking pg_hba.conf");
+    let pghba_path = pgdata_path.join("pg_hba.conf");
+
+    if config::line_in_file(&pghba_path, PG_HBA_ALL_MD5)? {
+        info!("updated pg_hba.conf to allow external connections");
+    } else {
+        info!("pg_hba.conf is up-to-date");
+    }
+
+    Ok(())
+}
+
+/// Create a standby.signal file
+pub fn add_standby_signal(pgdata_path: &Path) -> Result<()> {
+    // XXX: consider making it a part of spec.json
+    info!("adding standby.signal");
+    let signalfile = pgdata_path.join("standby.signal");
+
+    if !signalfile.exists() {
+        info!("created standby.signal");
+        File::create(signalfile)?;
+    } else {
+        info!("reused pre-existing standby.signal");
+    }
+    Ok(())
+}
+
+/// Compute could be unexpectedly shut down, for example, during the
+/// database dropping. This leaves the database in the invalid state,
+/// which prevents new db creation with the same name. This function
+/// will clean it up before proceeding with catalog updates. All
+/// possible future cleanup operations may go here too.
+#[instrument(skip_all)]
+pub fn cleanup_instance(client: &mut Client) -> Result<()> {
+    let existing_dbs = get_existing_dbs(client)?;
+
+    for (_, db) in existing_dbs {
+        if db.invalid {
+            // After recent commit in Postgres, interrupted DROP DATABASE
+            // leaves the database in the invalid state. According to the
+            // commit message, the only option for user is to drop it again.
+            // See:
+            //   https://github.com/postgres/postgres/commit/a4b4cc1d60f7e8ccfcc8ff8cb80c28ee411ad9a9
+            //
+            // Postgres Neon extension is done the way, that db is de-registered
+            // in the control plane metadata only after it is dropped. So there is
+            // a chance that it still thinks that db should exist. This means
+            // that it will be re-created by `handle_databases()`. Yet, it's fine
+            // as user can just repeat drop (in vanilla Postgres they would need
+            // to do the same, btw).
+            let query = format!("DROP DATABASE IF EXISTS {}", db.name.pg_quote());
+            info!("dropping invalid database {}", db.name);
+            client.execute(query.as_str(), &[])?;
+        }
+    }
+
+    Ok(())
+}
+
+/// Given a cluster spec json and open transaction it handles roles creation,
+/// deletion and update.
+#[instrument(skip_all)]
+pub fn handle_roles(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
+    let mut xact = client.transaction()?;
+    let existing_roles: Vec<Role> = get_existing_roles(&mut xact)?;
+
+    // Print a list of existing Postgres roles (only in debug mode)
+    if span_enabled!(Level::INFO) {
+        info!("postgres roles:");
+        for r in &existing_roles {
+            info!(
+                "    - {}:{}",
+                r.name,
+                if r.encrypted_password.is_some() {
+                    "[FILTERED]"
+                } else {
+                    "(null)"
+                }
+            );
+        }
+    }
+
+    // Process delta operations first
+    if let Some(ops) = &spec.delta_operations {
+        info!("processing role renames");
+        for op in ops {
+            match op.action.as_ref() {
+                "delete_role" => {
+                    // no-op now, roles will be deleted at the end of configuration
+                }
+                // Renaming role drops its password, since role name is
+                // used as a salt there.  It is important that this role
+                // is recorded with a new `name` in the `roles` list.
+                // Follow up roles update will set the new password.
+                "rename_role" => {
+                    let new_name = op.new_name.as_ref().unwrap();
+
+                    // XXX: with a limited number of roles it is fine, but consider making it a HashMap
+                    if existing_roles.iter().any(|r| r.name == op.name) {
+                        let query: String = format!(
+                            "ALTER ROLE {} RENAME TO {}",
+                            op.name.pg_quote(),
+                            new_name.pg_quote()
+                        );
+
+                        warn!("renaming role '{}' to '{}'", op.name, new_name);
+                        xact.execute(query.as_str(), &[])?;
+                    }
+                }
+                _ => {}
+            }
+        }
+    }
+
+    // Refresh Postgres roles info to handle possible roles renaming
+    let existing_roles: Vec<Role> = get_existing_roles(&mut xact)?;
+
+    info!("cluster spec roles:");
+    for role in &spec.cluster.roles {
+        let name = &role.name;
+        // XXX: with a limited number of roles it is fine, but consider making it a HashMap
+        let pg_role = existing_roles.iter().find(|r| r.name == *name);
+
+        enum RoleAction {
+            None,
+            Update,
+            Create,
+        }
+        let action = if let Some(r) = pg_role {
+            if (r.encrypted_password.is_none() && role.encrypted_password.is_some())
+                || (r.encrypted_password.is_some() && role.encrypted_password.is_none())
+                || !r.bypassrls.unwrap_or(false)
+                || !r.replication.unwrap_or(false)
+            {
+                RoleAction::Update
+            } else if let Some(pg_pwd) = &r.encrypted_password {
+                // Check whether password changed or not (trim 'md5' prefix first if any)
+                //
+                // This is a backward compatibility hack, which comes from the times when we were using
+                // md5 for everyone and hashes were stored in the console db without md5 prefix. So when
+                // role comes from the control-plane (json spec) `Role.encrypted_password` doesn't have md5 prefix,
+                // but when role comes from Postgres (`get_existing_roles` / `existing_roles`) it has this prefix.
+                // Here is the only place so far where we compare hashes, so it seems to be the best candidate
+                // to place this compatibility layer.
+                let pg_pwd = if let Some(stripped) = pg_pwd.strip_prefix("md5") {
+                    stripped
+                } else {
+                    pg_pwd
+                };
+                if pg_pwd != *role.encrypted_password.as_ref().unwrap() {
+                    RoleAction::Update
+                } else {
+                    RoleAction::None
+                }
+            } else {
+                RoleAction::None
+            }
+        } else {
+            RoleAction::Create
+        };
+
+        match action {
+            RoleAction::None => {}
+            RoleAction::Update => {
+                let mut query: String =
+                    format!("ALTER ROLE {} BYPASSRLS REPLICATION", name.pg_quote());
+                query.push_str(&role.to_pg_options());
+                xact.execute(query.as_str(), &[])?;
+            }
+            RoleAction::Create => {
+                let mut query: String = format!(
+                    "CREATE ROLE {} CREATEROLE CREATEDB BYPASSRLS REPLICATION IN ROLE neon_superuser",
+                    name.pg_quote()
+                );
+                info!("role create query: '{}'", &query);
+                query.push_str(&role.to_pg_options());
+                xact.execute(query.as_str(), &[])?;
+            }
+        }
+
+        if span_enabled!(Level::INFO) {
+            let pwd = if role.encrypted_password.is_some() {
+                "[FILTERED]"
+            } else {
+                "(null)"
+            };
+            let action_str = match action {
+                RoleAction::None => "",
+                RoleAction::Create => " -> create",
+                RoleAction::Update => " -> update",
+            };
+            info!("   - {}:{}{}", name, pwd, action_str);
+        }
+    }
+
+    xact.commit()?;
+
+    Ok(())
+}
+
+/// Reassign all dependent objects and delete requested roles.
+#[instrument(skip_all)]
+pub fn handle_role_deletions(spec: &ComputeSpec, connstr: &str, client: &mut Client) -> Result<()> {
+    if let Some(ops) = &spec.delta_operations {
+        // First, reassign all dependent objects to db owners.
+        info!("reassigning dependent objects of to-be-deleted roles");
+
+        // Fetch existing roles. We could've exported and used `existing_roles` from
+        // `handle_roles()`, but we only make this list there before creating new roles.
+        // Which is probably fine as we never create to-be-deleted roles, but that'd
+        // just look a bit untidy. Anyway, the entire `pg_roles` should be in shared
+        // buffers already, so this shouldn't be a big deal.
+        let mut xact = client.transaction()?;
+        let existing_roles: Vec<Role> = get_existing_roles(&mut xact)?;
+        xact.commit()?;
+
+        for op in ops {
+            // Check that role is still present in Postgres, as this could be a
+            // restart with the same spec after role deletion.
+            if op.action == "delete_role" && existing_roles.iter().any(|r| r.name == op.name) {
+                reassign_owned_objects(spec, connstr, &op.name)?;
+            }
+        }
+
+        // Second, proceed with role deletions.
+        info!("processing role deletions");
+        let mut xact = client.transaction()?;
+        for op in ops {
+            // We do not check either role exists or not,
+            // Postgres will take care of it for us
+            if op.action == "delete_role" {
+                let query: String = format!("DROP ROLE IF EXISTS {}", &op.name.pg_quote());
+
+                warn!("deleting role '{}'", &op.name);
+                xact.execute(query.as_str(), &[])?;
+            }
+        }
+        xact.commit()?;
+    }
+
+    Ok(())
+}
+
+// Reassign all owned objects in all databases to the owner of the database.
+fn reassign_owned_objects(spec: &ComputeSpec, connstr: &str, role_name: &PgIdent) -> Result<()> {
+    for db in &spec.cluster.databases {
+        if db.owner != *role_name {
+            let mut conf = Config::from_str(connstr)?;
+            conf.dbname(&db.name);
+
+            let mut client = conf.connect(NoTls)?;
+
+            // This will reassign all dependent objects to the db owner
+            let reassign_query = format!(
+                "REASSIGN OWNED BY {} TO {}",
+                role_name.pg_quote(),
+                db.owner.pg_quote()
+            );
+            info!(
+                "reassigning objects owned by '{}' in db '{}' to '{}'",
+                role_name, &db.name, &db.owner
+            );
+            client.simple_query(&reassign_query)?;
+
+            // This now will only drop privileges of the role
+            let drop_query = format!("DROP OWNED BY {}", role_name.pg_quote());
+            client.simple_query(&drop_query)?;
+        }
+    }
+
+    Ok(())
+}
+
+/// It follows mostly the same logic as `handle_roles()` excepting that we
+/// does not use an explicit transactions block, since major database operations
+/// like `CREATE DATABASE` and `DROP DATABASE` do not support it. Statement-level
+/// atomicity should be enough here due to the order of operations and various checks,
+/// which together provide us idempotency.
+#[instrument(skip_all)]
+pub fn handle_databases(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
+    let existing_dbs = get_existing_dbs(client)?;
+
+    // Print a list of existing Postgres databases (only in debug mode)
+    if span_enabled!(Level::INFO) {
+        info!("postgres databases:");
+        for (dbname, db) in &existing_dbs {
+            info!("    {}:{}", dbname, db.owner);
+        }
+    }
+
+    // Process delta operations first
+    if let Some(ops) = &spec.delta_operations {
+        info!("processing delta operations on databases");
+        for op in ops {
+            match op.action.as_ref() {
+                // We do not check either DB exists or not,
+                // Postgres will take care of it for us
+                "delete_db" => {
+                    // In Postgres we can't drop a database if it is a template.
+                    // So we need to unset the template flag first, but it could
+                    // be a retry, so we could've already dropped the database.
+                    // Check that database exists first to make it idempotent.
+                    let unset_template_query: String = format!(
+                        "
+                        DO $$
+                        BEGIN
+                            IF EXISTS(
+                                SELECT 1
+                                FROM pg_catalog.pg_database
+                                WHERE datname = {}
+                            )
+                            THEN
+                            ALTER DATABASE {} is_template false;
+                            END IF;
+                        END
+                        $$;",
+                        escape_literal(&op.name),
+                        &op.name.pg_quote()
+                    );
+                    // Use FORCE to drop database even if there are active connections.
+                    // We run this from `cloud_admin`, so it should have enough privileges.
+                    // NB: there could be other db states, which prevent us from dropping
+                    // the database. For example, if db is used by any active subscription
+                    // or replication slot.
+                    // TODO: deal with it once we allow logical replication. Proper fix should
+                    // involve returning an error code to the control plane, so it could
+                    // figure out that this is a non-retryable error, return it to the user
+                    // and fail operation permanently.
+                    let drop_db_query: String = format!(
+                        "DROP DATABASE IF EXISTS {} WITH (FORCE)",
+                        &op.name.pg_quote()
+                    );
+
+                    warn!("deleting database '{}'", &op.name);
+                    client.execute(unset_template_query.as_str(), &[])?;
+                    client.execute(drop_db_query.as_str(), &[])?;
+                }
+                "rename_db" => {
+                    let new_name = op.new_name.as_ref().unwrap();
+
+                    if existing_dbs.get(&op.name).is_some() {
+                        let query: String = format!(
+                            "ALTER DATABASE {} RENAME TO {}",
+                            op.name.pg_quote(),
+                            new_name.pg_quote()
+                        );
+
+                        warn!("renaming database '{}' to '{}'", op.name, new_name);
+                        client.execute(query.as_str(), &[])?;
+                    }
+                }
+                _ => {}
+            }
+        }
+    }
+
+    // Refresh Postgres databases info to handle possible renames
+    let existing_dbs = get_existing_dbs(client)?;
+
+    info!("cluster spec databases:");
+    for db in &spec.cluster.databases {
+        let name = &db.name;
+        let pg_db = existing_dbs.get(name);
+
+        enum DatabaseAction {
+            None,
+            Update,
+            Create,
+        }
+        let action = if let Some(r) = pg_db {
+            // XXX: db owner name is returned as quoted string from Postgres,
+            // when quoting is needed.
+            let new_owner = if r.owner.starts_with('"') {
+                db.owner.pg_quote()
+            } else {
+                db.owner.clone()
+            };
+
+            if new_owner != r.owner {
+                // Update the owner
+                DatabaseAction::Update
+            } else {
+                DatabaseAction::None
+            }
+        } else {
+            DatabaseAction::Create
+        };
+
+        match action {
+            DatabaseAction::None => {}
+            DatabaseAction::Update => {
+                let query: String = format!(
+                    "ALTER DATABASE {} OWNER TO {}",
+                    name.pg_quote(),
+                    db.owner.pg_quote()
+                );
+                let _guard = info_span!("executing", query).entered();
+                client.execute(query.as_str(), &[])?;
+            }
+            DatabaseAction::Create => {
+                let mut query: String = format!("CREATE DATABASE {} ", name.pg_quote());
+                query.push_str(&db.to_pg_options());
+                let _guard = info_span!("executing", query).entered();
+                client.execute(query.as_str(), &[])?;
+                let grant_query: String = format!(
+                    "GRANT ALL PRIVILEGES ON DATABASE {} TO neon_superuser",
+                    name.pg_quote()
+                );
+                client.execute(grant_query.as_str(), &[])?;
+            }
+        };
+
+        if span_enabled!(Level::INFO) {
+            let action_str = match action {
+                DatabaseAction::None => "",
+                DatabaseAction::Create => " -> create",
+                DatabaseAction::Update => " -> update",
+            };
+            info!("   - {}:{}{}", db.name, db.owner, action_str);
+        }
+    }
+
+    Ok(())
+}
+
+/// Grant CREATE ON DATABASE to the database owner and do some other alters and grants
+/// to allow users creating trusted extensions and re-creating `public` schema, for example.
+#[instrument(skip_all)]
+pub fn handle_grants(spec: &ComputeSpec, client: &mut Client, connstr: &str) -> Result<()> {
+    info!("modifying database permissions");
+    let existing_dbs = get_existing_dbs(client)?;
+
+    // Do some per-database access adjustments. We'd better do this at db creation time,
+    // but CREATE DATABASE isn't transactional. So we cannot create db + do some grants
+    // atomically.
+    for db in &spec.cluster.databases {
+        match existing_dbs.get(&db.name) {
+            Some(pg_db) => {
+                if pg_db.restrict_conn || pg_db.invalid {
+                    info!(
+                        "skipping grants for db {} (invalid: {}, connections not allowed: {})",
+                        db.name, pg_db.invalid, pg_db.restrict_conn
+                    );
+                    continue;
+                }
+            }
+            None => {
+                bail!(
+                    "database {} doesn't exist in Postgres after handle_databases()",
+                    db.name
+                );
+            }
+        }
+
+        let mut conf = Config::from_str(connstr)?;
+        conf.dbname(&db.name);
+
+        let mut db_client = conf.connect(NoTls)?;
+
+        // This will only change ownership on the schema itself, not the objects
+        // inside it. Without it owner of the `public` schema will be `cloud_admin`
+        // and database owner cannot do anything with it. SQL procedure ensures
+        // that it won't error out if schema `public` doesn't exist.
+        let alter_query = format!(
+            "DO $$\n\
+                DECLARE\n\
+                    schema_owner TEXT;\n\
+                BEGIN\n\
+                    IF EXISTS(\n\
+                        SELECT nspname\n\
+                        FROM pg_catalog.pg_namespace\n\
+                        WHERE nspname = 'public'\n\
+                    )\n\
+                    THEN\n\
+                        SELECT nspowner::regrole::text\n\
+                            FROM pg_catalog.pg_namespace\n\
+                            WHERE nspname = 'public'\n\
+                            INTO schema_owner;\n\
+                \n\
+                        IF schema_owner = 'cloud_admin' OR schema_owner = 'zenith_admin'\n\
+                        THEN\n\
+                            ALTER SCHEMA public OWNER TO {};\n\
+                        END IF;\n\
+                    END IF;\n\
+                END\n\
+            $$;",
+            db.owner.pg_quote()
+        );
+        db_client.simple_query(&alter_query)?;
+
+        // Explicitly grant CREATE ON SCHEMA PUBLIC to the web_access user.
+        // This is needed because since postgres 15 this privilege is removed by default.
+        // TODO: web_access isn't created for almost 1 year. It could be that we have
+        // active users of 1 year old projects, but hopefully not, so check it and
+        // remove this code if possible. The worst thing that could happen is that
+        // user won't be able to use public schema in NEW databases created in the
+        // very OLD project.
+        let grant_query = "DO $$\n\
+                BEGIN\n\
+                    IF EXISTS(\n\
+                        SELECT nspname\n\
+                        FROM pg_catalog.pg_namespace\n\
+                        WHERE nspname = 'public'\n\
+                    ) AND\n\
+                    current_setting('server_version_num')::int/10000 >= 15\n\
+                    THEN\n\
+                        IF EXISTS(\n\
+                            SELECT rolname\n\
+                            FROM pg_catalog.pg_roles\n\
+                            WHERE rolname = 'web_access'\n\
+                        )\n\
+                        THEN\n\
+                            GRANT CREATE ON SCHEMA public TO web_access;\n\
+                        END IF;\n\
+                    END IF;\n\
+                END\n\
+            $$;"
+        .to_string();
+
+        info!("grant query for db {} : {}", &db.name, &grant_query);
+        db_client.simple_query(&grant_query)?;
+    }
+
+    Ok(())
+}
+
+/// Create required system extensions
+#[instrument(skip_all)]
+pub fn handle_extensions(spec: &ComputeSpec, client: &mut Client) -> Result<()> {
+    if let Some(libs) = spec.cluster.settings.find("shared_preload_libraries") {
+        if libs.contains("pg_stat_statements") {
+            // Create extension only if this compute really needs it
+            let query = "CREATE EXTENSION IF NOT EXISTS pg_stat_statements";
+            info!("creating system extensions with query: {}", query);
+            client.simple_query(query)?;
+        }
+    }
+
+    Ok(())
+}

compute_tools/src/sync_sk.rs

@@ -0,0 +1,98 @@
+// Utils for running sync_safekeepers
+use anyhow::Result;
+use tracing::info;
+use utils::lsn::Lsn;
+
+#[derive(Copy, Clone, Debug)]
+pub enum TimelineStatusResponse {
+    NotFound,
+    Ok(TimelineStatusOkResponse),
+}
+
+#[derive(Copy, Clone, Debug)]
+pub struct TimelineStatusOkResponse {
+    flush_lsn: Lsn,
+    commit_lsn: Lsn,
+}
+
+/// Get a safekeeper's metadata for our timeline. The id is only used for logging
+pub async fn ping_safekeeper(
+    id: String,
+    config: tokio_postgres::Config,
+) -> Result<TimelineStatusResponse> {
+    // TODO add retries
+
+    // Connect
+    info!("connecting to {}", id);
+    let (client, conn) = config.connect(tokio_postgres::NoTls).await?;
+    tokio::spawn(async move {
+        if let Err(e) = conn.await {
+            eprintln!("connection error: {}", e);
+        }
+    });
+
+    // Query
+    info!("querying {}", id);
+    let result = client.simple_query("TIMELINE_STATUS").await?;
+
+    // Parse result
+    info!("done with {}", id);
+    if let postgres::SimpleQueryMessage::Row(row) = &result[0] {
+        use std::str::FromStr;
+        let response = TimelineStatusResponse::Ok(TimelineStatusOkResponse {
+            flush_lsn: Lsn::from_str(row.get("flush_lsn").unwrap())?,
+            commit_lsn: Lsn::from_str(row.get("commit_lsn").unwrap())?,
+        });
+        Ok(response)
+    } else {
+        // Timeline doesn't exist
+        Ok(TimelineStatusResponse::NotFound)
+    }
+}
+
+/// Given a quorum of responses, check if safekeepers are synced at some Lsn
+pub fn check_if_synced(responses: Vec<TimelineStatusResponse>) -> Option<Lsn> {
+    // Check if all responses are ok
+    let ok_responses: Vec<TimelineStatusOkResponse> = responses
+        .iter()
+        .filter_map(|r| match r {
+            TimelineStatusResponse::Ok(ok_response) => Some(ok_response),
+            _ => None,
+        })
+        .cloned()
+        .collect();
+    if ok_responses.len() < responses.len() {
+        info!(
+            "not synced. Only {} out of {} know about this timeline",
+            ok_responses.len(),
+            responses.len()
+        );
+        return None;
+    }
+
+    // Get the min and the max of everything
+    let commit: Vec<Lsn> = ok_responses.iter().map(|r| r.commit_lsn).collect();
+    let flush: Vec<Lsn> = ok_responses.iter().map(|r| r.flush_lsn).collect();
+    let commit_max = commit.iter().max().unwrap();
+    let commit_min = commit.iter().min().unwrap();
+    let flush_max = flush.iter().max().unwrap();
+    let flush_min = flush.iter().min().unwrap();
+
+    // Check that all values are equal
+    if commit_min != commit_max {
+        info!("not synced. {:?} {:?}", commit_min, commit_max);
+        return None;
+    }
+    if flush_min != flush_max {
+        info!("not synced. {:?} {:?}", flush_min, flush_max);
+        return None;
+    }
+
+    // Check that commit == flush
+    if commit_max != flush_max {
+        info!("not synced. {:?} {:?}", commit_max, flush_max);
+        return None;
+    }
+
+    Some(*commit_max)
+}

compute_tools/tests/config_test.rs

@@ -0,0 +1,48 @@
+#[cfg(test)]
+mod config_tests {
+
+    use std::fs::{remove_file, File};
+    use std::io::{Read, Write};
+    use std::path::Path;
+
+    use compute_tools::config::*;
+
+    fn write_test_file(path: &Path, content: &str) {
+        let mut file = File::create(path).unwrap();
+        file.write_all(content.as_bytes()).unwrap();
+    }
+
+    fn check_file_content(path: &Path, expected_content: &str) {
+        let mut file = File::open(path).unwrap();
+        let mut content = String::new();
+
+        file.read_to_string(&mut content).unwrap();
+        assert_eq!(content, expected_content);
+    }
+
+    #[test]
+    fn test_line_in_file() {
+        let path = Path::new("./tests/tmp/config_test.txt");
+        write_test_file(path, "line1\nline2.1\t line2.2\nline3");
+
+        let line = "line2.1\t line2.2";
+        let result = line_in_file(path, line).unwrap();
+        assert!(!result);
+        check_file_content(path, "line1\nline2.1\t line2.2\nline3");
+
+        let line = "line4";
+        let result = line_in_file(path, line).unwrap();
+        assert!(result);
+        check_file_content(path, "line1\nline2.1\t line2.2\nline3\nline4");
+
+        remove_file(path).unwrap();
+
+        let path = Path::new("./tests/tmp/new_config_test.txt");
+        let line = "line4";
+        let result = line_in_file(path, line).unwrap();
+        assert!(result);
+        check_file_content(path, "line4");
+
+        remove_file(path).unwrap();
+    }
+}

compute_tools/tests/pg_helpers_tests.rs

@@ -0,0 +1,100 @@
+#[cfg(test)]
+mod pg_helpers_tests {
+    use std::fs::File;
+
+    use compute_api::spec::{ComputeSpec, GenericOption, GenericOptions, PgIdent};
+    use compute_tools::pg_helpers::*;
+
+    #[test]
+    fn params_serialize() {
+        let file = File::open("../libs/compute_api/tests/cluster_spec.json").unwrap();
+        let spec: ComputeSpec = serde_json::from_reader(file).unwrap();
+
+        assert_eq!(
+            spec.cluster.databases.first().unwrap().to_pg_options(),
+            "LC_COLLATE 'C' LC_CTYPE 'C' TEMPLATE template0 OWNER \"alexk\""
+        );
+        assert_eq!(
+            spec.cluster.roles.first().unwrap().to_pg_options(),
+            " LOGIN PASSWORD 'md56b1d16b78004bbd51fa06af9eda75972'"
+        );
+    }
+
+    #[test]
+    fn settings_serialize() {
+        let file = File::open("../libs/compute_api/tests/cluster_spec.json").unwrap();
+        let spec: ComputeSpec = serde_json::from_reader(file).unwrap();
+
+        assert_eq!(
+            spec.cluster.settings.as_pg_settings(),
+            r#"fsync = off
+wal_level = logical
+hot_standby = on
+neon.safekeepers = '127.0.0.1:6502,127.0.0.1:6503,127.0.0.1:6501'
+wal_log_hints = on
+log_connections = on
+shared_buffers = 32768
+port = 55432
+max_connections = 100
+max_wal_senders = 10
+listen_addresses = '0.0.0.0'
+wal_sender_timeout = 0
+password_encryption = md5
+maintenance_work_mem = 65536
+max_parallel_workers = 8
+max_worker_processes = 8
+neon.tenant_id = 'b0554b632bd4d547a63b86c3630317e8'
+max_replication_slots = 10
+neon.timeline_id = '2414a61ffc94e428f14b5758fe308e13'
+shared_preload_libraries = 'neon'
+synchronous_standby_names = 'walproposer'
+neon.pageserver_connstring = 'host=127.0.0.1 port=6400'
+test.escaping = 'here''s a backslash \\ and a quote '' and a double-quote " hooray'
+"#
+        );
+    }
+
+    #[test]
+    fn ident_pg_quote() {
+        let ident: PgIdent = PgIdent::from("\"name\";\\n select 1;");
+
+        assert_eq!(ident.pg_quote(), "\"\"\"name\"\";\\n select 1;\"");
+    }
+
+    #[test]
+    fn generic_options_search() {
+        let generic_options: GenericOptions = Some(vec![
+            GenericOption {
+                name: "present_value".into(),
+                value: Some("value".into()),
+                vartype: "string".into(),
+            },
+            GenericOption {
+                name: "missed_value".into(),
+                value: None,
+                vartype: "int".into(),
+            },
+        ]);
+        assert_eq!(generic_options.find("present_value"), Some("value".into()));
+        assert_eq!(generic_options.find("missed_value"), None);
+        assert_eq!(generic_options.find("invalid_value"), None);
+
+        let empty_generic_options: GenericOptions = Some(vec![]);
+        assert_eq!(empty_generic_options.find("present_value"), None);
+        assert_eq!(empty_generic_options.find("missed_value"), None);
+        assert_eq!(empty_generic_options.find("invalid_value"), None);
+
+        let none_generic_options: GenericOptions = None;
+        assert_eq!(none_generic_options.find("present_value"), None);
+        assert_eq!(none_generic_options.find("missed_value"), None);
+        assert_eq!(none_generic_options.find("invalid_value"), None);
+    }
+
+    #[test]
+    fn test_escape_literal() {
+        assert_eq!(escape_literal("test"), "'test'");
+        assert_eq!(escape_literal("test'"), "'test'''");
+        assert_eq!(escape_literal("test\\'"), "E'test\\\\'''");
+        assert_eq!(escape_literal("test\\'\\'"), "E'test\\\\''\\\\'''");
+    }
+}

compute_tools/tests/tmp/.gitignore

@@ -0,0 +1 @@
+**/*

control_plane/Cargo.toml

@@ -1,27 +1,39 @@
 [package]
 name = "control_plane"
 version = "0.1.0"
-authors = ["Stas Kelvich <stas@zenith.tech>"]
-edition = "2018"
-
-# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+edition.workspace = true
+license.workspace = true
 
 [dependencies]
-rand = "0.8.3"
-tar = "0.4.33"
-postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
-tokio-postgres = { git = "https://github.com/zenithdb/rust-postgres.git", rev="a0d067b66447951d1276a53fb09886539c3fa094" }
+anyhow.workspace = true
+camino.workspace = true
+clap.workspace = true
+comfy-table.workspace = true
+git-version.workspace = true
+nix.workspace = true
+once_cell.workspace = true
+postgres.workspace = true
+hex.workspace = true
+hyper.workspace = true
+regex.workspace = true
+reqwest = { workspace = true, features = ["blocking", "json"] }
+serde.workspace = true
+serde_json.workspace = true
+serde_with.workspace = true
+tar.workspace = true
+thiserror.workspace = true
+toml.workspace = true
+tokio.workspace = true
+url.workspace = true
+# Note: Do not directly depend on pageserver or safekeeper; use pageserver_api or safekeeper_api
+# instead, so that recompile times are better.
+pageserver_api.workspace = true
+postgres_backend.workspace = true
+safekeeper_api.workspace = true
+postgres_connection.workspace = true
+storage_broker.workspace = true
+utils.workspace = true
 
-serde = ""
-serde_derive = ""
-toml = ""
-lazy_static = ""
-regex = "1"
-anyhow = "1.0"
-hex = "0.4.3"
-bytes = "1.0.1"
-fs_extra = "1.2.0"
-
-pageserver = { path = "../pageserver" }
-walkeeper = { path = "../walkeeper" }
-postgres_ffi = { path = "../postgres_ffi" }
+compute_api.workspace = true
+workspace_hack.workspace = true
+tracing.workspace = true

control_plane/safekeepers.conf

@@ -0,0 +1,21 @@
+# Page server and three safekeepers.
+[pageserver]
+listen_pg_addr = '127.0.0.1:64000'
+listen_http_addr = '127.0.0.1:9898'
+pg_auth_type = 'Trust'
+http_auth_type = 'Trust'
+
+[[safekeepers]]
+id = 1
+pg_port = 5454
+http_port = 7676
+
+[[safekeepers]]
+id = 2
+pg_port = 5455
+http_port = 7677
+
+[[safekeepers]]
+id = 3
+pg_port = 5456
+http_port = 7678

control_plane/simple.conf

@@ -0,0 +1,16 @@
+# Minimal neon environment with one safekeeper. This is equivalent to the built-in
+# defaults that you get with no --config
+[[pageservers]]
+id=1
+listen_pg_addr = '127.0.0.1:64000'
+listen_http_addr = '127.0.0.1:9898'
+pg_auth_type = 'Trust'
+http_auth_type = 'Trust'
+
+[[safekeepers]]
+id = 1
+pg_port = 5454
+http_port = 7676
+
+[broker]
+listen_addr = '127.0.0.1:50051'

control_plane/src/attachment_service.rs

@@ -0,0 +1,104 @@
+use crate::{background_process, local_env::LocalEnv};
+use anyhow::anyhow;
+use camino::Utf8PathBuf;
+use serde::{Deserialize, Serialize};
+use std::{path::PathBuf, process::Child};
+use utils::id::{NodeId, TenantId};
+
+pub struct AttachmentService {
+    env: LocalEnv,
+    listen: String,
+    path: PathBuf,
+}
+
+const COMMAND: &str = "attachment_service";
+
+#[derive(Serialize, Deserialize)]
+pub struct AttachHookRequest {
+    pub tenant_id: TenantId,
+    pub node_id: Option<NodeId>,
+}
+
+#[derive(Serialize, Deserialize)]
+pub struct AttachHookResponse {
+    pub gen: Option<u32>,
+}
+
+impl AttachmentService {
+    pub fn from_env(env: &LocalEnv) -> Self {
+        let path = env.base_data_dir.join("attachments.json");
+
+        // Makes no sense to construct this if pageservers aren't going to use it: assume
+        // pageservers have control plane API set
+        let listen_url = env.control_plane_api.clone().unwrap();
+
+        let listen = format!(
+            "{}:{}",
+            listen_url.host_str().unwrap(),
+            listen_url.port().unwrap()
+        );
+
+        Self {
+            env: env.clone(),
+            path,
+            listen,
+        }
+    }
+
+    fn pid_file(&self) -> Utf8PathBuf {
+        Utf8PathBuf::from_path_buf(self.env.base_data_dir.join("attachment_service.pid"))
+            .expect("non-Unicode path")
+    }
+
+    pub fn start(&self) -> anyhow::Result<Child> {
+        let path_str = self.path.to_string_lossy();
+
+        background_process::start_process(
+            COMMAND,
+            &self.env.base_data_dir,
+            &self.env.attachment_service_bin(),
+            ["-l", &self.listen, "-p", &path_str],
+            [],
+            background_process::InitialPidFile::Create(&self.pid_file()),
+            // TODO: a real status check
+            || Ok(true),
+        )
+    }
+
+    pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
+        background_process::stop_process(immediate, COMMAND, &self.pid_file())
+    }
+
+    /// Call into the attach_hook API, for use before handing out attachments to pageservers
+    pub fn attach_hook(
+        &self,
+        tenant_id: TenantId,
+        pageserver_id: NodeId,
+    ) -> anyhow::Result<Option<u32>> {
+        use hyper::StatusCode;
+
+        let url = self
+            .env
+            .control_plane_api
+            .clone()
+            .unwrap()
+            .join("attach-hook")
+            .unwrap();
+        let client = reqwest::blocking::ClientBuilder::new()
+            .build()
+            .expect("Failed to construct http client");
+
+        let request = AttachHookRequest {
+            tenant_id,
+            node_id: Some(pageserver_id),
+        };
+
+        let response = client.post(url).json(&request).send()?;
+        if response.status() != StatusCode::OK {
+            return Err(anyhow!("Unexpected status {}", response.status()));
+        }
+
+        let response = response.json::<AttachHookResponse>()?;
+        Ok(response.gen)
+    }
+}

control_plane/src/background_process.rs

@@ -0,0 +1,349 @@
+//! Spawns and kills background processes that are needed by Neon CLI.
+//! Applies common set-up such as log and pid files (if needed) to every process.
+//!
+//! Neon CLI does not run in background, so it needs to store the information about
+//! spawned processes, which it does in this module.
+//! We do that by storing the pid of the process in the "${process_name}.pid" file.
+//! The pid file can be created by the process itself
+//! (Neon storage binaries do that and also ensure that a lock is taken onto that file)
+//! or we create such file after starting the process
+//! (non-Neon binaries don't necessarily follow our pidfile conventions).
+//! The pid stored in the file is later used to stop the service.
+//!
+//! See the [`lock_file`](utils::lock_file) module for more info.
+
+use std::ffi::OsStr;
+use std::io::Write;
+use std::os::unix::prelude::AsRawFd;
+use std::os::unix::process::CommandExt;
+use std::path::Path;
+use std::process::{Child, Command};
+use std::time::Duration;
+use std::{fs, io, thread};
+
+use anyhow::Context;
+use camino::{Utf8Path, Utf8PathBuf};
+use nix::errno::Errno;
+use nix::fcntl::{FcntlArg, FdFlag};
+use nix::sys::signal::{kill, Signal};
+use nix::unistd::Pid;
+use utils::pid_file::{self, PidFileRead};
+
+// These constants control the loop used to poll for process start / stop.
+//
+// The loop waits for at most 10 seconds, polling every 100 ms.
+// Once a second, it prints a dot ("."), to give the user an indication that
+// it's waiting. If the process hasn't started/stopped after 5 seconds,
+// it prints a notice that it's taking long, but keeps waiting.
+//
+const RETRY_UNTIL_SECS: u64 = 10;
+const RETRIES: u64 = (RETRY_UNTIL_SECS * 1000) / RETRY_INTERVAL_MILLIS;
+const RETRY_INTERVAL_MILLIS: u64 = 100;
+const DOT_EVERY_RETRIES: u64 = 10;
+const NOTICE_AFTER_RETRIES: u64 = 50;
+
+/// Argument to `start_process`, to indicate whether it should create pidfile or if the process creates
+/// it itself.
+pub enum InitialPidFile<'t> {
+    /// Create a pidfile, to allow future CLI invocations to manipulate the process.
+    Create(&'t Utf8Path),
+    /// The process will create the pidfile itself, need to wait for that event.
+    Expect(&'t Utf8Path),
+}
+
+/// Start a background child process using the parameters given.
+pub fn start_process<F, AI, A, EI>(
+    process_name: &str,
+    datadir: &Path,
+    command: &Path,
+    args: AI,
+    envs: EI,
+    initial_pid_file: InitialPidFile,
+    process_status_check: F,
+) -> anyhow::Result<Child>
+where
+    F: Fn() -> anyhow::Result<bool>,
+    AI: IntoIterator<Item = A>,
+    A: AsRef<OsStr>,
+    // Not generic AsRef<OsStr>, otherwise empty `envs` prevents type inference
+    EI: IntoIterator<Item = (String, String)>,
+{
+    let log_path = datadir.join(format!("{process_name}.log"));
+    let process_log_file = fs::OpenOptions::new()
+        .create(true)
+        .write(true)
+        .append(true)
+        .open(&log_path)
+        .with_context(|| {
+            format!("Could not open {process_name} log file {log_path:?} for writing")
+        })?;
+    let same_file_for_stderr = process_log_file.try_clone().with_context(|| {
+        format!("Could not reuse {process_name} log file {log_path:?} for writing stderr")
+    })?;
+
+    let mut command = Command::new(command);
+    let background_command = command
+        .stdout(process_log_file)
+        .stderr(same_file_for_stderr)
+        .args(args);
+    let filled_cmd = fill_remote_storage_secrets_vars(fill_rust_env_vars(background_command));
+    filled_cmd.envs(envs);
+
+    let pid_file_to_check = match initial_pid_file {
+        InitialPidFile::Create(path) => {
+            pre_exec_create_pidfile(filled_cmd, path);
+            path
+        }
+        InitialPidFile::Expect(path) => path,
+    };
+
+    let mut spawned_process = filled_cmd.spawn().with_context(|| {
+        format!("Could not spawn {process_name}, see console output and log files for details.")
+    })?;
+    let pid = spawned_process.id();
+    let pid = Pid::from_raw(
+        i32::try_from(pid)
+            .with_context(|| format!("Subprocess {process_name} has invalid pid {pid}"))?,
+    );
+
+    for retries in 0..RETRIES {
+        match process_started(pid, Some(pid_file_to_check), &process_status_check) {
+            Ok(true) => {
+                println!("\n{process_name} started, pid: {pid}");
+                return Ok(spawned_process);
+            }
+            Ok(false) => {
+                if retries == NOTICE_AFTER_RETRIES {
+                    // The process is taking a long time to start up. Keep waiting, but
+                    // print a message
+                    print!("\n{process_name} has not started yet, continuing to wait");
+                }
+                if retries % DOT_EVERY_RETRIES == 0 {
+                    print!(".");
+                    io::stdout().flush().unwrap();
+                }
+                thread::sleep(Duration::from_millis(RETRY_INTERVAL_MILLIS));
+            }
+            Err(e) => {
+                println!("{process_name} failed to start: {e:#}");
+                if let Err(e) = spawned_process.kill() {
+                    println!("Could not stop {process_name} subprocess: {e:#}")
+                };
+                return Err(e);
+            }
+        }
+    }
+    println!();
+    anyhow::bail!("{process_name} did not start in {RETRY_UNTIL_SECS} seconds");
+}
+
+/// Stops the process, using the pid file given. Returns Ok also if the process is already not running.
+pub fn stop_process(
+    immediate: bool,
+    process_name: &str,
+    pid_file: &Utf8Path,
+) -> anyhow::Result<()> {
+    let pid = match pid_file::read(pid_file)
+        .with_context(|| format!("read pid_file {pid_file:?}"))?
+    {
+        PidFileRead::NotExist => {
+            println!("{process_name} is already stopped: no pid file present at {pid_file:?}");
+            return Ok(());
+        }
+        PidFileRead::NotHeldByAnyProcess(_) => {
+            // Don't try to kill according to file contents beacuse the pid might have been re-used by another process.
+            // Don't delete the file either, it can race with new pid file creation.
+            // Read `pid_file` module comment for details.
+            println!(
+                "No process is holding the pidfile. The process must have already exited. Leave in place to avoid race conditions: {pid_file:?}"
+            );
+            return Ok(());
+        }
+        PidFileRead::LockedByOtherProcess(pid) => pid,
+    };
+    // XXX the pid could become invalid (and recycled) at any time before the kill() below.
+
+    // send signal
+    let sig = if immediate {
+        print!("Stopping {process_name} with pid {pid} immediately..");
+        Signal::SIGQUIT
+    } else {
+        print!("Stopping {process_name} with pid {pid} gracefully..");
+        Signal::SIGTERM
+    };
+    io::stdout().flush().unwrap();
+    match kill(pid, sig) {
+        Ok(()) => (),
+        Err(Errno::ESRCH) => {
+            // Again, don't delete the pid file. The unlink can race with a new pid file being created.
+            println!(
+                "{process_name} with pid {pid} does not exist, but a pid file {pid_file:?} was found. Likely the pid got recycled. Lucky we didn't harm anyone."
+            );
+            return Ok(());
+        }
+        Err(e) => anyhow::bail!("Failed to send signal to {process_name} with pid {pid}: {e}"),
+    }
+
+    // Wait until process is gone
+    wait_until_stopped(process_name, pid)?;
+    Ok(())
+}
+
+pub fn wait_until_stopped(process_name: &str, pid: Pid) -> anyhow::Result<()> {
+    for retries in 0..RETRIES {
+        match process_has_stopped(pid) {
+            Ok(true) => {
+                println!("\n{process_name} stopped");
+                return Ok(());
+            }
+            Ok(false) => {
+                if retries == NOTICE_AFTER_RETRIES {
+                    // The process is taking a long time to start up. Keep waiting, but
+                    // print a message
+                    print!("\n{process_name} has not stopped yet, continuing to wait");
+                }
+                if retries % DOT_EVERY_RETRIES == 0 {
+                    print!(".");
+                    io::stdout().flush().unwrap();
+                }
+                thread::sleep(Duration::from_millis(RETRY_INTERVAL_MILLIS));
+            }
+            Err(e) => {
+                println!("{process_name} with pid {pid} failed to stop: {e:#}");
+                return Err(e);
+            }
+        }
+    }
+    println!();
+    anyhow::bail!("{process_name} with pid {pid} did not stop in {RETRY_UNTIL_SECS} seconds");
+}
+
+fn fill_rust_env_vars(cmd: &mut Command) -> &mut Command {
+    // If RUST_BACKTRACE is set, pass it through. But if it's not set, default
+    // to RUST_BACKTRACE=1.
+    let backtrace_setting = std::env::var_os("RUST_BACKTRACE");
+    let backtrace_setting = backtrace_setting
+        .as_deref()
+        .unwrap_or_else(|| OsStr::new("1"));
+
+    let mut filled_cmd = cmd.env_clear().env("RUST_BACKTRACE", backtrace_setting);
+
+    // Pass through these environment variables to the command
+    for var in ["LLVM_PROFILE_FILE", "FAILPOINTS", "RUST_LOG"] {
+        if let Some(val) = std::env::var_os(var) {
+            filled_cmd = filled_cmd.env(var, val);
+        }
+    }
+
+    filled_cmd
+}
+
+fn fill_remote_storage_secrets_vars(mut cmd: &mut Command) -> &mut Command {
+    for env_key in [
+        "AWS_ACCESS_KEY_ID",
+        "AWS_SECRET_ACCESS_KEY",
+        "AWS_SESSION_TOKEN",
+        "AZURE_STORAGE_ACCOUNT",
+        "AZURE_STORAGE_ACCESS_KEY",
+    ] {
+        if let Ok(value) = std::env::var(env_key) {
+            cmd = cmd.env(env_key, value);
+        }
+    }
+    cmd
+}
+
+/// Add a `pre_exec` to the cmd that, inbetween fork() and exec(),
+/// 1. Claims a pidfile with a fcntl lock on it and
+/// 2. Sets up the pidfile's file descriptor so that it (and the lock)
+///    will remain held until the cmd exits.
+fn pre_exec_create_pidfile<P>(cmd: &mut Command, path: P) -> &mut Command
+where
+    P: Into<Utf8PathBuf>,
+{
+    let path: Utf8PathBuf = path.into();
+    // SAFETY:
+    // pre_exec is marked unsafe because it runs between fork and exec.
+    // Why is that dangerous in various ways?
+    // Long answer:  https://github.com/rust-lang/rust/issues/39575
+    // Short answer: in a multi-threaded program, other threads may have
+    // been inside of critical sections at the time of fork. In the
+    // original process, that was allright, assuming they protected
+    // the critical sections appropriately, e.g., through locks.
+    // Fork adds another process to the mix that
+    //   1. Has a single thread T
+    //   2. In an exact copy of the address space at the time of fork.
+    // A variety of problems scan occur now:
+    //   1. T tries to grab a lock that was locked at the time of fork.
+    //      It will wait forever since in its address space, the lock
+    //      is in state 'taken' but the thread that would unlock it is
+    //      not there.
+    //   2. A rust object that represented some external resource in the
+    //      parent now got implicitly copied by the the fork, even though
+    //      the object's type is not `Copy`. The parent program may use
+    //      non-copyability as way to enforce unique ownership of an
+    //      external resource in the typesystem. The fork breaks that
+    //      assumption, as now both parent and child process have an
+    //      owned instance of the object that represents the same
+    //      underlying resource.
+    // While these seem like niche problems, (1) in particular is
+    // highly relevant. For example, `malloc()` may grab a mutex internally,
+    // and so, if we forked while another thread was mallocing' and our
+    // pre_exec closure allocates as well, it will block on the malloc
+    // mutex forever
+    //
+    // The proper solution is to only use C library functions that are marked
+    // "async-signal-safe": https://man7.org/linux/man-pages/man7/signal-safety.7.html
+    //
+    // With this specific pre_exec() closure, the non-error path doesn't allocate.
+    // The error path uses `anyhow`, and hence does allocate.
+    // We take our chances there, hoping that any potential disaster is constrained
+    // to the child process (e.g., malloc has no state ourside of the child process).
+    // Last, `expect` prints to stderr, and stdio is not async-signal-safe.
+    // Again, we take our chances, making the same assumptions as for malloc.
+    unsafe {
+        cmd.pre_exec(move || {
+            let file = pid_file::claim_for_current_process(&path).expect("claim pid file");
+            // Remove the FD_CLOEXEC flag on the pidfile descriptor so that the pidfile
+            // remains locked after exec.
+            nix::fcntl::fcntl(file.as_raw_fd(), FcntlArg::F_SETFD(FdFlag::empty()))
+                .expect("remove FD_CLOEXEC");
+            // Don't run drop(file), it would close the file before we actually exec.
+            std::mem::forget(file);
+            Ok(())
+        });
+    }
+    cmd
+}
+
+fn process_started<F>(
+    pid: Pid,
+    pid_file_to_check: Option<&Utf8Path>,
+    status_check: &F,
+) -> anyhow::Result<bool>
+where
+    F: Fn() -> anyhow::Result<bool>,
+{
+    match status_check() {
+        Ok(true) => match pid_file_to_check {
+            Some(pid_file_path) => match pid_file::read(pid_file_path)? {
+                PidFileRead::NotExist => Ok(false),
+                PidFileRead::LockedByOtherProcess(pid_in_file) => Ok(pid_in_file == pid),
+                PidFileRead::NotHeldByAnyProcess(_) => Ok(false),
+            },
+            None => Ok(true),
+        },
+        Ok(false) => Ok(false),
+        Err(e) => anyhow::bail!("process failed to start: {e}"),
+    }
+}
+
+fn process_has_stopped(pid: Pid) -> anyhow::Result<bool> {
+    match kill(pid, None) {
+        // Process exists, keep waiting
+        Ok(_) => Ok(false),
+        // Process not found, we're done
+        Err(Errno::ESRCH) => Ok(true),
+        Err(err) => anyhow::bail!("Failed to send signal to process with pid {pid}: {err}"),
+    }
+}

control_plane/src/bin/attachment_service.rs

@@ -0,0 +1,302 @@
+/// The attachment service mimics the aspects of the control plane API
+/// that are required for a pageserver to operate.
+///
+/// This enables running & testing pageservers without a full-blown
+/// deployment of the Neon cloud platform.
+///
+use anyhow::anyhow;
+use clap::Parser;
+use hex::FromHex;
+use hyper::StatusCode;
+use hyper::{Body, Request, Response};
+use serde::{Deserialize, Serialize};
+use std::path::{Path, PathBuf};
+use std::{collections::HashMap, sync::Arc};
+use utils::http::endpoint::request_span;
+use utils::logging::{self, LogFormat};
+use utils::signals::{ShutdownSignals, Signal};
+
+use utils::{
+    http::{
+        endpoint::{self},
+        error::ApiError,
+        json::{json_request, json_response},
+        RequestExt, RouterBuilder,
+    },
+    id::{NodeId, TenantId},
+    tcp_listener,
+};
+
+use pageserver_api::control_api::{
+    ReAttachRequest, ReAttachResponse, ReAttachResponseTenant, ValidateRequest, ValidateResponse,
+    ValidateResponseTenant,
+};
+
+use control_plane::attachment_service::{AttachHookRequest, AttachHookResponse};
+
+#[derive(Parser)]
+#[command(author, version, about, long_about = None)]
+#[command(arg_required_else_help(true))]
+struct Cli {
+    /// Host and port to listen on, like `127.0.0.1:1234`
+    #[arg(short, long)]
+    listen: std::net::SocketAddr,
+
+    /// Path to the .json file to store state (will be created if it doesn't exist)
+    #[arg(short, long)]
+    path: PathBuf,
+}
+
+// The persistent state of each Tenant
+#[derive(Serialize, Deserialize, Clone)]
+struct TenantState {
+    // Currently attached pageserver
+    pageserver: Option<NodeId>,
+
+    // Latest generation number: next time we attach, increment this
+    // and use the incremented number when attaching
+    generation: u32,
+}
+
+fn to_hex_map<S, V>(input: &HashMap<TenantId, V>, serializer: S) -> Result<S::Ok, S::Error>
+where
+    S: serde::Serializer,
+    V: Clone + Serialize,
+{
+    let transformed = input.iter().map(|(k, v)| (hex::encode(k), v.clone()));
+
+    transformed
+        .collect::<HashMap<String, V>>()
+        .serialize(serializer)
+}
+
+fn from_hex_map<'de, D, V>(deserializer: D) -> Result<HashMap<TenantId, V>, D::Error>
+where
+    D: serde::de::Deserializer<'de>,
+    V: Deserialize<'de>,
+{
+    let hex_map = HashMap::<String, V>::deserialize(deserializer)?;
+    hex_map
+        .into_iter()
+        .map(|(k, v)| {
+            TenantId::from_hex(k)
+                .map(|k| (k, v))
+                .map_err(serde::de::Error::custom)
+        })
+        .collect()
+}
+
+// Top level state available to all HTTP handlers
+#[derive(Serialize, Deserialize)]
+struct PersistentState {
+    #[serde(serialize_with = "to_hex_map", deserialize_with = "from_hex_map")]
+    tenants: HashMap<TenantId, TenantState>,
+
+    #[serde(skip)]
+    path: PathBuf,
+}
+
+impl PersistentState {
+    async fn save(&self) -> anyhow::Result<()> {
+        let bytes = serde_json::to_vec(self)?;
+        tokio::fs::write(&self.path, &bytes).await?;
+
+        Ok(())
+    }
+
+    async fn load(path: &Path) -> anyhow::Result<Self> {
+        let bytes = tokio::fs::read(path).await?;
+        let mut decoded = serde_json::from_slice::<Self>(&bytes)?;
+        decoded.path = path.to_owned();
+        Ok(decoded)
+    }
+
+    async fn load_or_new(path: &Path) -> Self {
+        match Self::load(path).await {
+            Ok(s) => {
+                tracing::info!("Loaded state file at {}", path.display());
+                s
+            }
+            Err(e)
+                if e.downcast_ref::<std::io::Error>()
+                    .map(|e| e.kind() == std::io::ErrorKind::NotFound)
+                    .unwrap_or(false) =>
+            {
+                tracing::info!("Will create state file at {}", path.display());
+                Self {
+                    tenants: HashMap::new(),
+                    path: path.to_owned(),
+                }
+            }
+            Err(e) => {
+                panic!("Failed to load state from '{}': {e:#} (maybe your .neon/ dir was written by an older version?)", path.display())
+            }
+        }
+    }
+}
+
+/// State available to HTTP request handlers
+#[derive(Clone)]
+struct State {
+    inner: Arc<tokio::sync::RwLock<PersistentState>>,
+}
+
+impl State {
+    fn new(persistent_state: PersistentState) -> State {
+        Self {
+            inner: Arc::new(tokio::sync::RwLock::new(persistent_state)),
+        }
+    }
+}
+
+#[inline(always)]
+fn get_state(request: &Request<Body>) -> &State {
+    request
+        .data::<Arc<State>>()
+        .expect("unknown state type")
+        .as_ref()
+}
+
+/// Pageserver calls into this on startup, to learn which tenants it should attach
+async fn handle_re_attach(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
+    let reattach_req = json_request::<ReAttachRequest>(&mut req).await?;
+
+    let state = get_state(&req).inner.clone();
+    let mut locked = state.write().await;
+
+    let mut response = ReAttachResponse {
+        tenants: Vec::new(),
+    };
+    for (t, state) in &mut locked.tenants {
+        if state.pageserver == Some(reattach_req.node_id) {
+            state.generation += 1;
+            response.tenants.push(ReAttachResponseTenant {
+                id: *t,
+                gen: state.generation,
+            });
+        }
+    }
+
+    locked.save().await.map_err(ApiError::InternalServerError)?;
+
+    json_response(StatusCode::OK, response)
+}
+
+/// Pageserver calls into this before doing deletions, to confirm that it still
+/// holds the latest generation for the tenants with deletions enqueued
+async fn handle_validate(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
+    let validate_req = json_request::<ValidateRequest>(&mut req).await?;
+
+    let locked = get_state(&req).inner.read().await;
+
+    let mut response = ValidateResponse {
+        tenants: Vec::new(),
+    };
+
+    for req_tenant in validate_req.tenants {
+        if let Some(tenant_state) = locked.tenants.get(&req_tenant.id) {
+            let valid = tenant_state.generation == req_tenant.gen;
+            response.tenants.push(ValidateResponseTenant {
+                id: req_tenant.id,
+                valid,
+            });
+        }
+    }
+
+    json_response(StatusCode::OK, response)
+}
+/// Call into this before attaching a tenant to a pageserver, to acquire a generation number
+/// (in the real control plane this is unnecessary, because the same program is managing
+///  generation numbers and doing attachments).
+async fn handle_attach_hook(mut req: Request<Body>) -> Result<Response<Body>, ApiError> {
+    let attach_req = json_request::<AttachHookRequest>(&mut req).await?;
+
+    let state = get_state(&req).inner.clone();
+    let mut locked = state.write().await;
+
+    let tenant_state = locked
+        .tenants
+        .entry(attach_req.tenant_id)
+        .or_insert_with(|| TenantState {
+            pageserver: attach_req.node_id,
+            generation: 0,
+        });
+
+    if let Some(attaching_pageserver) = attach_req.node_id.as_ref() {
+        tenant_state.generation += 1;
+        tracing::info!(
+            tenant_id = %attach_req.tenant_id,
+            ps_id = %attaching_pageserver,
+            generation = %tenant_state.generation,
+            "issuing",
+        );
+    } else if let Some(ps_id) = tenant_state.pageserver {
+        tracing::info!(
+            tenant_id = %attach_req.tenant_id,
+            %ps_id,
+            generation = %tenant_state.generation,
+            "dropping",
+        );
+    } else {
+        tracing::info!(
+            tenant_id = %attach_req.tenant_id,
+            "no-op: tenant already has no pageserver");
+    }
+    tenant_state.pageserver = attach_req.node_id;
+    let generation = tenant_state.generation;
+
+    locked.save().await.map_err(ApiError::InternalServerError)?;
+
+    json_response(
+        StatusCode::OK,
+        AttachHookResponse {
+            gen: attach_req.node_id.map(|_| generation),
+        },
+    )
+}
+
+fn make_router(persistent_state: PersistentState) -> RouterBuilder<hyper::Body, ApiError> {
+    endpoint::make_router()
+        .data(Arc::new(State::new(persistent_state)))
+        .post("/re-attach", |r| request_span(r, handle_re_attach))
+        .post("/validate", |r| request_span(r, handle_validate))
+        .post("/attach-hook", |r| request_span(r, handle_attach_hook))
+}
+
+#[tokio::main]
+async fn main() -> anyhow::Result<()> {
+    logging::init(
+        LogFormat::Plain,
+        logging::TracingErrorLayerEnablement::Disabled,
+    )?;
+
+    let args = Cli::parse();
+    tracing::info!(
+        "Starting, state at {}, listening on {}",
+        args.path.to_string_lossy(),
+        args.listen
+    );
+
+    let persistent_state = PersistentState::load_or_new(&args.path).await;
+
+    let http_listener = tcp_listener::bind(args.listen)?;
+    let router = make_router(persistent_state)
+        .build()
+        .map_err(|err| anyhow!(err))?;
+    let service = utils::http::RouterService::new(router).unwrap();
+    let server = hyper::Server::from_tcp(http_listener)?.serve(service);
+
+    tracing::info!("Serving on {0}", args.listen);
+
+    tokio::task::spawn(server);
+
+    ShutdownSignals::handle(|signal| match signal {
+        Signal::Interrupt | Signal::Terminate | Signal::Quit => {
+            tracing::info!("Got {}. Terminating", signal.name());
+            // We're just a test helper: no graceful shutdown.
+            std::process::exit(0);
+        }
+    })?;
+
+    Ok(())
+}

control_plane/src/broker.rs

@@ -0,0 +1,56 @@
+//! Code to manage the storage broker
+//!
+//! In the local test environment, the data for each safekeeper is stored in
+//!
+//! ```text
+//!   .neon/safekeepers/<safekeeper id>
+//! ```
+use anyhow::Context;
+
+use camino::Utf8PathBuf;
+
+use crate::{background_process, local_env};
+
+pub fn start_broker_process(env: &local_env::LocalEnv) -> anyhow::Result<()> {
+    let broker = &env.broker;
+    let listen_addr = &broker.listen_addr;
+
+    print!("Starting neon broker at {}", listen_addr);
+
+    let args = [format!("--listen-addr={listen_addr}")];
+
+    let client = reqwest::blocking::Client::new();
+    background_process::start_process(
+        "storage_broker",
+        &env.base_data_dir,
+        &env.storage_broker_bin(),
+        args,
+        [],
+        background_process::InitialPidFile::Create(&storage_broker_pid_file_path(env)),
+        || {
+            let url = broker.client_url();
+            let status_url = url.join("status").with_context(|| {
+                format!("Failed to append /status path to broker endpoint {url}")
+            })?;
+            let request = client
+                .get(status_url)
+                .build()
+                .with_context(|| format!("Failed to construct request to broker endpoint {url}"))?;
+            match client.execute(request) {
+                Ok(resp) => Ok(resp.status().is_success()),
+                Err(_) => Ok(false),
+            }
+        },
+    )
+    .context("Failed to spawn storage_broker subprocess")?;
+    Ok(())
+}
+
+pub fn stop_broker_process(env: &local_env::LocalEnv) -> anyhow::Result<()> {
+    background_process::stop_process(true, "storage_broker", &storage_broker_pid_file_path(env))
+}
+
+fn storage_broker_pid_file_path(env: &local_env::LocalEnv) -> Utf8PathBuf {
+    Utf8PathBuf::from_path_buf(env.base_data_dir.join("storage_broker.pid"))
+        .expect("non-Unicode path")
+}

control_plane/src/compute.rs

@@ -1,459 +0,0 @@
-use std::fs::{self, OpenOptions};
-use std::io::{Read, Write};
-use std::net::SocketAddr;
-use std::net::TcpStream;
-use std::os::unix::fs::PermissionsExt;
-use std::process::Command;
-use std::sync::Arc;
-use std::time::Duration;
-use std::{collections::BTreeMap, path::PathBuf};
-
-use anyhow::{Context, Result};
-use lazy_static::lazy_static;
-use regex::Regex;
-use tar;
-
-use postgres::{Client, NoTls};
-
-use crate::local_env::LocalEnv;
-use crate::storage::{PageServerNode, WalProposerNode};
-use pageserver::ZTimelineId;
-
-//
-// ComputeControlPlane
-//
-pub struct ComputeControlPlane {
-    base_port: u16,
-    pageserver: Arc<PageServerNode>,
-    pub nodes: BTreeMap<String, Arc<PostgresNode>>,
-    env: LocalEnv,
-}
-
-impl ComputeControlPlane {
-    // Load current nodes with ports from data directories on disk
-    pub fn load(env: LocalEnv) -> Result<ComputeControlPlane> {
-        // TODO: since pageserver do not have config file yet we believe here that
-        // it is running on default port. Change that when pageserver will have config.
-        let pageserver = Arc::new(PageServerNode::from_env(&env));
-
-        let pgdatadirspath = env.repo_path.join("pgdatadirs");
-        let nodes: Result<BTreeMap<_, _>> = fs::read_dir(&pgdatadirspath)
-            .with_context(|| format!("failed to list {}", pgdatadirspath.display()))?
-            .into_iter()
-            .map(|f| {
-                PostgresNode::from_dir_entry(f?, &env, &pageserver)
-                    .map(|node| (node.name.clone(), Arc::new(node)))
-            })
-            .collect();
-        let nodes = nodes?;
-
-        Ok(ComputeControlPlane {
-            base_port: 55431,
-            pageserver,
-            nodes,
-            env,
-        })
-    }
-
-    fn get_port(&mut self) -> u16 {
-        1 + self
-            .nodes
-            .iter()
-            .map(|(_name, node)| node.address.port())
-            .max()
-            .unwrap_or(self.base_port)
-    }
-
-    pub fn local(local_env: &LocalEnv, pageserver: &Arc<PageServerNode>) -> ComputeControlPlane {
-        ComputeControlPlane {
-            base_port: 65431,
-            pageserver: Arc::clone(pageserver),
-            nodes: BTreeMap::new(),
-            env: local_env.clone(),
-        }
-    }
-
-    /// Connect to a page server, get base backup, and untar it to initialize a
-    /// new data directory
-    pub fn new_from_page_server(
-        &mut self,
-        is_test: bool,
-        timelineid: ZTimelineId,
-    ) -> Result<Arc<PostgresNode>> {
-        let node_id = self.nodes.len() as u32 + 1;
-
-        let node = Arc::new(PostgresNode {
-            name: format!("pg{}", node_id),
-            address: SocketAddr::new("127.0.0.1".parse().unwrap(), self.get_port()),
-            env: self.env.clone(),
-            pageserver: Arc::clone(&self.pageserver),
-            is_test,
-            timelineid,
-        });
-
-        node.init_from_page_server()?;
-        self.nodes.insert(node.name.clone(), Arc::clone(&node));
-
-        Ok(node)
-    }
-
-    pub fn new_test_node(&mut self, timelineid: ZTimelineId) -> Arc<PostgresNode> {
-        let node = self.new_from_page_server(true, timelineid);
-        assert!(node.is_ok());
-        let node = node.unwrap();
-
-        // Configure the node to stream WAL directly to the pageserver
-        node.append_conf(
-            "postgresql.conf",
-            format!(
-                "callmemaybe_connstring = '{}'\n", // FIXME escaping
-                node.connstr()
-            )
-            .as_str(),
-        );
-
-        node
-    }
-
-    pub fn new_test_master_node(&mut self, timelineid: ZTimelineId) -> Arc<PostgresNode> {
-        let node = self.new_from_page_server(true, timelineid).unwrap();
-
-        node.append_conf(
-            "postgresql.conf",
-            "synchronous_standby_names = 'safekeeper_proxy'\n",
-        );
-
-        node
-    }
-
-    pub fn new_node(&mut self, timelineid: ZTimelineId) -> Result<Arc<PostgresNode>> {
-        let node = self.new_from_page_server(false, timelineid).unwrap();
-
-        // Configure the node to stream WAL directly to the pageserver
-        node.append_conf(
-            "postgresql.conf",
-            format!(
-                "callmemaybe_connstring = '{}'\n", // FIXME escaping
-                node.connstr()
-            )
-            .as_str(),
-        );
-
-        Ok(node)
-    }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-
-pub struct PostgresNode {
-    pub address: SocketAddr,
-    name: String,
-    pub env: LocalEnv,
-    pageserver: Arc<PageServerNode>,
-    is_test: bool,
-    timelineid: ZTimelineId,
-}
-
-impl PostgresNode {
-    fn from_dir_entry(
-        entry: std::fs::DirEntry,
-        env: &LocalEnv,
-        pageserver: &Arc<PageServerNode>,
-    ) -> Result<PostgresNode> {
-        if !entry.file_type()?.is_dir() {
-            anyhow::bail!(
-                "PostgresNode::from_dir_entry failed: '{}' is not a directory",
-                entry.path().display()
-            );
-        }
-
-        lazy_static! {
-            static ref CONF_PORT_RE: Regex = Regex::new(r"(?m)^\s*port\s*=\s*(\d+)\s*$").unwrap();
-        }
-
-        // parse data directory name
-        let fname = entry.file_name();
-        let name = fname.to_str().unwrap().to_string();
-
-        // find out tcp port in config file
-        let cfg_path = entry.path().join("postgresql.conf");
-        let config = fs::read_to_string(cfg_path.clone()).with_context(|| {
-            format!(
-                "failed to read config file in {}",
-                cfg_path.to_str().unwrap()
-            )
-        })?;
-
-        let err_msg = format!(
-            "failed to find port definition in config file {}",
-            cfg_path.to_str().unwrap()
-        );
-        let port: u16 = CONF_PORT_RE
-            .captures(config.as_str())
-            .ok_or(anyhow::Error::msg(err_msg.clone() + " 1"))?
-            .iter()
-            .last()
-            .ok_or(anyhow::Error::msg(err_msg.clone() + " 2"))?
-            .ok_or(anyhow::Error::msg(err_msg.clone() + " 3"))?
-            .as_str()
-            .parse()
-            .with_context(|| err_msg)?;
-
-        // FIXME: What timeline is this server on? Would have to parse the postgresql.conf
-        // file for that, too. It's currently not needed for anything, but it would be
-        // nice to list the timeline in "zenith pg list"
-        let timelineid_buf = [0u8; 16];
-        let timelineid = ZTimelineId::from(timelineid_buf);
-
-        // ok now
-        Ok(PostgresNode {
-            address: SocketAddr::new("127.0.0.1".parse().unwrap(), port),
-            name,
-            env: env.clone(),
-            pageserver: Arc::clone(pageserver),
-            is_test: false,
-            timelineid,
-        })
-    }
-
-    // Connect to a page server, get base backup, and untar it to initialize a
-    // new data directory
-    pub fn init_from_page_server(&self) -> Result<()> {
-        let pgdata = self.pgdata();
-
-        println!(
-            "Extracting base backup to create postgres instance: path={} port={}",
-            pgdata.display(),
-            self.address.port()
-        );
-
-        // initialize data directory
-        if self.is_test {
-            fs::remove_dir_all(&pgdata).ok();
-        }
-
-        let sql = format!("basebackup {}", self.timelineid);
-        let mut client = self
-            .pageserver
-            .page_server_psql_client()
-            .with_context(|| "connecting to page server failed")?;
-
-        fs::create_dir_all(&pgdata)
-            .with_context(|| format!("could not create data directory {}", pgdata.display()))?;
-        fs::set_permissions(pgdata.as_path(), fs::Permissions::from_mode(0o700)).with_context(
-            || {
-                format!(
-                    "could not set permissions in data directory {}",
-                    pgdata.display()
-                )
-            },
-        )?;
-
-        // FIXME: The compute node should be able to stream the WAL it needs from the WAL safekeepers or archive.
-        // But that's not implemented yet. For now, 'pg_wal' is included in the base backup tarball that
-        // we receive from the Page Server, so we don't need to create the empty 'pg_wal' directory here.
-        //fs::create_dir_all(pgdata.join("pg_wal"))?;
-
-        let mut copyreader = client
-            .copy_out(sql.as_str())
-            .with_context(|| "page server 'basebackup' command failed")?;
-
-        // FIXME: Currently, we slurp the whole tarball into memory, and then extract it,
-        // but we really should do this:
-        //let mut ar = tar::Archive::new(copyreader);
-        let mut buf = vec![];
-        copyreader
-            .read_to_end(&mut buf)
-            .with_context(|| "reading base backup from page server failed")?;
-        let mut ar = tar::Archive::new(buf.as_slice());
-        ar.unpack(&pgdata)
-            .with_context(|| "extracting page backup failed")?;
-
-        // listen for selected port
-        self.append_conf(
-            "postgresql.conf",
-            &format!(
-                "max_wal_senders = 10\n\
-                 max_replication_slots = 10\n\
-                 hot_standby = on\n\
-                 shared_buffers = 1MB\n\
-                 max_connections = 100\n\
-                 wal_level = replica\n\
-                 listen_addresses = '{address}'\n\
-                 port = {port}\n",
-                address = self.address.ip(),
-                port = self.address.port()
-            ),
-        );
-
-        // Never clean up old WAL. TODO: We should use a replication
-        // slot or something proper, to prevent the compute node
-        // from removing WAL that hasn't been streamed to the safekeepr or
-        // page server yet. But this will do for now.
-        self.append_conf("postgresql.conf", &format!("wal_keep_size='10TB'\n"));
-
-        // Connect it to the page server.
-
-        // Configure that node to take pages from pageserver
-        self.append_conf(
-            "postgresql.conf",
-            &format!(
-                "page_server_connstring = 'host={} port={}'\n\
-                      zenith_timeline='{}'\n",
-                self.pageserver.address().ip(),
-                self.pageserver.address().port(),
-                self.timelineid
-            ),
-        );
-
-        Ok(())
-    }
-
-    fn pgdata(&self) -> PathBuf {
-        self.env.repo_path.join("pgdatadirs").join(&self.name)
-    }
-
-    pub fn status(&self) -> &str {
-        let timeout = Duration::from_millis(300);
-        let has_pidfile = self.pgdata().join("postmaster.pid").exists();
-        let can_connect = TcpStream::connect_timeout(&self.address, timeout).is_ok();
-
-        match (has_pidfile, can_connect) {
-            (true, true) => "running",
-            (false, false) => "stopped",
-            (true, false) => "crashed",
-            (false, true) => "running, no pidfile",
-        }
-    }
-
-    pub fn append_conf(&self, config: &str, opts: &str) {
-        OpenOptions::new()
-            .append(true)
-            .open(self.pgdata().join(config).to_str().unwrap())
-            .unwrap()
-            .write_all(opts.as_bytes())
-            .unwrap();
-    }
-
-    fn pg_ctl(&self, args: &[&str]) -> Result<()> {
-        let pg_ctl_path = self.env.pg_bin_dir().join("pg_ctl");
-
-        let pg_ctl = Command::new(pg_ctl_path)
-            .args(
-                [
-                    &[
-                        "-D",
-                        self.pgdata().to_str().unwrap(),
-                        "-l",
-                        self.pgdata().join("log").to_str().unwrap(),
-                    ],
-                    args,
-                ]
-                .concat(),
-            )
-            .env_clear()
-            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap())
-            .status()
-            .with_context(|| "pg_ctl failed")?;
-        if !pg_ctl.success() {
-            anyhow::bail!("pg_ctl failed");
-        }
-        Ok(())
-    }
-
-    pub fn start(&self) -> Result<()> {
-        println!("Starting postgres node at '{}'", self.connstr());
-        self.pg_ctl(&["start"])
-    }
-
-    pub fn restart(&self) -> Result<()> {
-        self.pg_ctl(&["restart"])
-    }
-
-    pub fn stop(&self) -> Result<()> {
-        self.pg_ctl(&["-m", "immediate", "stop"])
-    }
-
-    pub fn connstr(&self) -> String {
-        format!(
-            "host={} port={} user={}",
-            self.address.ip(),
-            self.address.port(),
-            self.whoami()
-        )
-    }
-
-    // XXX: cache that in control plane
-    pub fn whoami(&self) -> String {
-        let output = Command::new("whoami")
-            .output()
-            .expect("failed to execute whoami");
-
-        if !output.status.success() {
-            panic!("whoami failed");
-        }
-
-        String::from_utf8(output.stdout).unwrap().trim().to_string()
-    }
-
-    pub fn safe_psql(&self, db: &str, sql: &str) -> Vec<tokio_postgres::Row> {
-        let connstring = format!(
-            "host={} port={} dbname={} user={}",
-            self.address.ip(),
-            self.address.port(),
-            db,
-            self.whoami()
-        );
-        let mut client = Client::connect(connstring.as_str(), NoTls).unwrap();
-
-        println!("Running {}", sql);
-        client.query(sql, &[]).unwrap()
-    }
-
-    pub fn open_psql(&self, db: &str) -> Client {
-        let connstring = format!(
-            "host={} port={} dbname={} user={}",
-            self.address.ip(),
-            self.address.port(),
-            db,
-            self.whoami()
-        );
-        Client::connect(connstring.as_str(), NoTls).unwrap()
-    }
-
-    pub fn start_proxy(&self, wal_acceptors: &str) -> WalProposerNode {
-        let proxy_path = self.env.pg_bin_dir().join("safekeeper_proxy");
-        match Command::new(proxy_path.as_path())
-            .args(&["--ztimelineid", &self.timelineid.to_string()])
-            .args(&["-s", wal_acceptors])
-            .args(&["-h", &self.address.ip().to_string()])
-            .args(&["-p", &self.address.port().to_string()])
-            .arg("-v")
-            .stderr(
-                OpenOptions::new()
-                    .create(true)
-                    .append(true)
-                    .open(self.pgdata().join("safekeeper_proxy.log"))
-                    .unwrap(),
-            )
-            .spawn()
-        {
-            Ok(child) => WalProposerNode { pid: child.id() },
-            Err(e) => panic!("Failed to launch {:?}: {}", proxy_path, e),
-        }
-    }
-
-    // TODO
-    pub fn pg_bench() {}
-}
-
-impl Drop for PostgresNode {
-    // destructor to clean up state after test is done
-    // XXX: we may detect failed test by setting some flag in catch_unwind()
-    // and checking it here. But let just clean datadirs on start.
-    fn drop(&mut self) {
-        if self.is_test {
-            let _ = self.stop();
-        }
-    }
-}

control_plane/src/endpoint.rs

@@ -0,0 +1,717 @@
+//! Code to manage compute endpoints
+//!
+//! In the local test environment, the data for each endpoint is stored in
+//!
+//! ```text
+//!   .neon/endpoints/<endpoint id>
+//! ```
+//!
+//! Some basic information about the endpoint, like the tenant and timeline IDs,
+//! are stored in the `endpoint.json` file. The `endpoint.json` file is created
+//! when the endpoint is created, and doesn't change afterwards.
+//!
+//! The endpoint is managed by the `compute_ctl` binary. When an endpoint is
+//! started, we launch `compute_ctl` It synchronizes the safekeepers, downloads
+//! the basebackup from the pageserver to initialize the the data directory, and
+//! finally launches the PostgreSQL process. It watches the PostgreSQL process
+//! until it exits.
+//!
+//! When an endpoint is created, a `postgresql.conf` file is also created in
+//! the endpoint's directory. The file can be modified before starting PostgreSQL.
+//! However, the `postgresql.conf` file in the endpoint directory is not used directly
+//! by PostgreSQL. It is passed to `compute_ctl`, and `compute_ctl` writes another
+//! copy of it in the data directory.
+//!
+//! Directory contents:
+//!
+//! ```text
+//! .neon/endpoints/main/
+//!     compute.log               - log output of `compute_ctl` and `postgres`
+//!     endpoint.json             - serialized `EndpointConf` struct
+//!     postgresql.conf           - postgresql settings
+//!     spec.json                 - passed to `compute_ctl`
+//!     pgdata/
+//!         postgresql.conf       - copy of postgresql.conf created by `compute_ctl`
+//!         zenith.signal
+//!         <other PostgreSQL files>
+//! ```
+//!
+use std::collections::BTreeMap;
+use std::net::SocketAddr;
+use std::net::TcpStream;
+use std::path::PathBuf;
+use std::process::Command;
+use std::sync::Arc;
+use std::time::Duration;
+
+use anyhow::{anyhow, bail, Context, Result};
+use serde::{Deserialize, Serialize};
+use utils::id::{NodeId, TenantId, TimelineId};
+
+use crate::local_env::LocalEnv;
+use crate::pageserver::PageServerNode;
+use crate::postgresql_conf::PostgresConf;
+
+use compute_api::responses::{ComputeState, ComputeStatus};
+use compute_api::spec::{Cluster, ComputeMode, ComputeSpec};
+
+// contents of a endpoint.json file
+#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
+pub struct EndpointConf {
+    endpoint_id: String,
+    tenant_id: TenantId,
+    timeline_id: TimelineId,
+    mode: ComputeMode,
+    pg_port: u16,
+    http_port: u16,
+    pg_version: u32,
+    skip_pg_catalog_updates: bool,
+    pageserver_id: NodeId,
+}
+
+//
+// ComputeControlPlane
+//
+pub struct ComputeControlPlane {
+    base_port: u16,
+
+    // endpoint ID is the key
+    pub endpoints: BTreeMap<String, Arc<Endpoint>>,
+
+    env: LocalEnv,
+}
+
+impl ComputeControlPlane {
+    // Load current endpoints from the endpoints/ subdirectories
+    pub fn load(env: LocalEnv) -> Result<ComputeControlPlane> {
+        let mut endpoints = BTreeMap::default();
+        for endpoint_dir in std::fs::read_dir(env.endpoints_path())
+            .with_context(|| format!("failed to list {}", env.endpoints_path().display()))?
+        {
+            let ep = Endpoint::from_dir_entry(endpoint_dir?, &env)?;
+            endpoints.insert(ep.endpoint_id.clone(), Arc::new(ep));
+        }
+
+        Ok(ComputeControlPlane {
+            base_port: 55431,
+            endpoints,
+            env,
+        })
+    }
+
+    fn get_port(&mut self) -> u16 {
+        1 + self
+            .endpoints
+            .values()
+            .map(|ep| std::cmp::max(ep.pg_address.port(), ep.http_address.port()))
+            .max()
+            .unwrap_or(self.base_port)
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    pub fn new_endpoint(
+        &mut self,
+        endpoint_id: &str,
+        tenant_id: TenantId,
+        timeline_id: TimelineId,
+        pg_port: Option<u16>,
+        http_port: Option<u16>,
+        pg_version: u32,
+        mode: ComputeMode,
+        pageserver_id: NodeId,
+    ) -> Result<Arc<Endpoint>> {
+        let pg_port = pg_port.unwrap_or_else(|| self.get_port());
+        let http_port = http_port.unwrap_or_else(|| self.get_port() + 1);
+        let pageserver =
+            PageServerNode::from_env(&self.env, self.env.get_pageserver_conf(pageserver_id)?);
+        let ep = Arc::new(Endpoint {
+            endpoint_id: endpoint_id.to_owned(),
+            pg_address: SocketAddr::new("127.0.0.1".parse().unwrap(), pg_port),
+            http_address: SocketAddr::new("127.0.0.1".parse().unwrap(), http_port),
+            env: self.env.clone(),
+            pageserver,
+            timeline_id,
+            mode,
+            tenant_id,
+            pg_version,
+            // We don't setup roles and databases in the spec locally, so we don't need to
+            // do catalog updates. Catalog updates also include check availability
+            // data creation. Yet, we have tests that check that size and db dump
+            // before and after start are the same. So, skip catalog updates,
+            // with this we basically test a case of waking up an idle compute, where
+            // we also skip catalog updates in the cloud.
+            skip_pg_catalog_updates: true,
+        });
+
+        ep.create_endpoint_dir()?;
+        std::fs::write(
+            ep.endpoint_path().join("endpoint.json"),
+            serde_json::to_string_pretty(&EndpointConf {
+                endpoint_id: endpoint_id.to_string(),
+                tenant_id,
+                timeline_id,
+                mode,
+                http_port,
+                pg_port,
+                pg_version,
+                skip_pg_catalog_updates: true,
+                pageserver_id,
+            })?,
+        )?;
+        std::fs::write(
+            ep.endpoint_path().join("postgresql.conf"),
+            ep.setup_pg_conf()?.to_string(),
+        )?;
+
+        self.endpoints
+            .insert(ep.endpoint_id.clone(), Arc::clone(&ep));
+
+        Ok(ep)
+    }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+
+#[derive(Debug)]
+pub struct Endpoint {
+    /// used as the directory name
+    endpoint_id: String,
+    pub tenant_id: TenantId,
+    pub timeline_id: TimelineId,
+    pub mode: ComputeMode,
+
+    // port and address of the Postgres server and `compute_ctl`'s HTTP API
+    pub pg_address: SocketAddr,
+    pub http_address: SocketAddr,
+
+    // postgres major version in the format: 14, 15, etc.
+    pg_version: u32,
+
+    // These are not part of the endpoint as such, but the environment
+    // the endpoint runs in.
+    pub env: LocalEnv,
+    pageserver: PageServerNode,
+
+    // Optimizations
+    skip_pg_catalog_updates: bool,
+}
+
+impl Endpoint {
+    fn from_dir_entry(entry: std::fs::DirEntry, env: &LocalEnv) -> Result<Endpoint> {
+        if !entry.file_type()?.is_dir() {
+            anyhow::bail!(
+                "Endpoint::from_dir_entry failed: '{}' is not a directory",
+                entry.path().display()
+            );
+        }
+
+        // parse data directory name
+        let fname = entry.file_name();
+        let endpoint_id = fname.to_str().unwrap().to_string();
+
+        // Read the endpoint.json file
+        let conf: EndpointConf =
+            serde_json::from_slice(&std::fs::read(entry.path().join("endpoint.json"))?)?;
+
+        let pageserver =
+            PageServerNode::from_env(env, env.get_pageserver_conf(conf.pageserver_id)?);
+
+        Ok(Endpoint {
+            pg_address: SocketAddr::new("127.0.0.1".parse().unwrap(), conf.pg_port),
+            http_address: SocketAddr::new("127.0.0.1".parse().unwrap(), conf.http_port),
+            endpoint_id,
+            env: env.clone(),
+            pageserver,
+            timeline_id: conf.timeline_id,
+            mode: conf.mode,
+            tenant_id: conf.tenant_id,
+            pg_version: conf.pg_version,
+            skip_pg_catalog_updates: conf.skip_pg_catalog_updates,
+        })
+    }
+
+    fn create_endpoint_dir(&self) -> Result<()> {
+        std::fs::create_dir_all(self.endpoint_path()).with_context(|| {
+            format!(
+                "could not create endpoint directory {}",
+                self.endpoint_path().display()
+            )
+        })
+    }
+
+    // Generate postgresql.conf with default configuration
+    fn setup_pg_conf(&self) -> Result<PostgresConf> {
+        let mut conf = PostgresConf::new();
+        conf.append("max_wal_senders", "10");
+        conf.append("wal_log_hints", "off");
+        conf.append("max_replication_slots", "10");
+        conf.append("hot_standby", "on");
+        conf.append("shared_buffers", "1MB");
+        conf.append("fsync", "off");
+        conf.append("max_connections", "100");
+        conf.append("wal_level", "logical");
+        // wal_sender_timeout is the maximum time to wait for WAL replication.
+        // It also defines how often the walreciever will send a feedback message to the wal sender.
+        conf.append("wal_sender_timeout", "5s");
+        conf.append("listen_addresses", &self.pg_address.ip().to_string());
+        conf.append("port", &self.pg_address.port().to_string());
+        conf.append("wal_keep_size", "0");
+        // walproposer panics when basebackup is invalid, it is pointless to restart in this case.
+        conf.append("restart_after_crash", "off");
+
+        // Load the 'neon' extension
+        conf.append("shared_preload_libraries", "neon");
+
+        conf.append_line("");
+        // Replication-related configurations, such as WAL sending
+        match &self.mode {
+            ComputeMode::Primary => {
+                // Configure backpressure
+                // - Replication write lag depends on how fast the walreceiver can process incoming WAL.
+                //   This lag determines latency of get_page_at_lsn. Speed of applying WAL is about 10MB/sec,
+                //   so to avoid expiration of 1 minute timeout, this lag should not be larger than 600MB.
+                //   Actually latency should be much smaller (better if < 1sec). But we assume that recently
+                //   updates pages are not requested from pageserver.
+                // - Replication flush lag depends on speed of persisting data by checkpointer (creation of
+                //   delta/image layers) and advancing disk_consistent_lsn. Safekeepers are able to
+                //   remove/archive WAL only beyond disk_consistent_lsn. Too large a lag can cause long
+                //   recovery time (in case of pageserver crash) and disk space overflow at safekeepers.
+                // - Replication apply lag depends on speed of uploading changes to S3 by uploader thread.
+                //   To be able to restore database in case of pageserver node crash, safekeeper should not
+                //   remove WAL beyond this point. Too large lag can cause space exhaustion in safekeepers
+                //   (if they are not able to upload WAL to S3).
+                conf.append("max_replication_write_lag", "15MB");
+                conf.append("max_replication_flush_lag", "10GB");
+
+                if !self.env.safekeepers.is_empty() {
+                    // Configure Postgres to connect to the safekeepers
+                    conf.append("synchronous_standby_names", "walproposer");
+
+                    let safekeepers = self
+                        .env
+                        .safekeepers
+                        .iter()
+                        .map(|sk| format!("localhost:{}", sk.get_compute_port()))
+                        .collect::<Vec<String>>()
+                        .join(",");
+                    conf.append("neon.safekeepers", &safekeepers);
+                } else {
+                    // We only use setup without safekeepers for tests,
+                    // and don't care about data durability on pageserver,
+                    // so set more relaxed synchronous_commit.
+                    conf.append("synchronous_commit", "remote_write");
+
+                    // Configure the node to stream WAL directly to the pageserver
+                    // This isn't really a supported configuration, but can be useful for
+                    // testing.
+                    conf.append("synchronous_standby_names", "pageserver");
+                }
+            }
+            ComputeMode::Static(lsn) => {
+                conf.append("recovery_target_lsn", &lsn.to_string());
+            }
+            ComputeMode::Replica => {
+                assert!(!self.env.safekeepers.is_empty());
+
+                // TODO: use future host field from safekeeper spec
+                // Pass the list of safekeepers to the replica so that it can connect to any of them,
+                // whichever is available.
+                let sk_ports = self
+                    .env
+                    .safekeepers
+                    .iter()
+                    .map(|x| x.get_compute_port().to_string())
+                    .collect::<Vec<_>>()
+                    .join(",");
+                let sk_hosts = vec!["localhost"; self.env.safekeepers.len()].join(",");
+
+                let connstr = format!(
+                    "host={} port={} options='-c timeline_id={} tenant_id={}' application_name=replica replication=true",
+                    sk_hosts,
+                    sk_ports,
+                    &self.timeline_id.to_string(),
+                    &self.tenant_id.to_string(),
+                );
+
+                let slot_name = format!("repl_{}_", self.timeline_id);
+                conf.append("primary_conninfo", connstr.as_str());
+                conf.append("primary_slot_name", slot_name.as_str());
+                conf.append("hot_standby", "on");
+                // prefetching of blocks referenced in WAL doesn't make sense for us
+                // Neon hot standby ignores pages that are not in the shared_buffers
+                if self.pg_version >= 15 {
+                    conf.append("recovery_prefetch", "off");
+                }
+            }
+        }
+
+        Ok(conf)
+    }
+
+    pub fn endpoint_path(&self) -> PathBuf {
+        self.env.endpoints_path().join(&self.endpoint_id)
+    }
+
+    pub fn pgdata(&self) -> PathBuf {
+        self.endpoint_path().join("pgdata")
+    }
+
+    pub fn status(&self) -> &str {
+        let timeout = Duration::from_millis(300);
+        let has_pidfile = self.pgdata().join("postmaster.pid").exists();
+        let can_connect = TcpStream::connect_timeout(&self.pg_address, timeout).is_ok();
+
+        match (has_pidfile, can_connect) {
+            (true, true) => "running",
+            (false, false) => "stopped",
+            (true, false) => "crashed",
+            (false, true) => "running, no pidfile",
+        }
+    }
+
+    fn pg_ctl(&self, args: &[&str], auth_token: &Option<String>) -> Result<()> {
+        let pg_ctl_path = self.env.pg_bin_dir(self.pg_version)?.join("pg_ctl");
+        let mut cmd = Command::new(&pg_ctl_path);
+        cmd.args(
+            [
+                &[
+                    "-D",
+                    self.pgdata().to_str().unwrap(),
+                    "-w", //wait till pg_ctl actually does what was asked
+                ],
+                args,
+            ]
+            .concat(),
+        )
+        .env_clear()
+        .env(
+            "LD_LIBRARY_PATH",
+            self.env.pg_lib_dir(self.pg_version)?.to_str().unwrap(),
+        )
+        .env(
+            "DYLD_LIBRARY_PATH",
+            self.env.pg_lib_dir(self.pg_version)?.to_str().unwrap(),
+        );
+
+        // Pass authentication token used for the connections to pageserver and safekeepers
+        if let Some(token) = auth_token {
+            cmd.env("NEON_AUTH_TOKEN", token);
+        }
+
+        let pg_ctl = cmd
+            .output()
+            .context(format!("{} failed", pg_ctl_path.display()))?;
+        if !pg_ctl.status.success() {
+            anyhow::bail!(
+                "pg_ctl failed, exit code: {}, stdout: {}, stderr: {}",
+                pg_ctl.status,
+                String::from_utf8_lossy(&pg_ctl.stdout),
+                String::from_utf8_lossy(&pg_ctl.stderr),
+            );
+        }
+
+        Ok(())
+    }
+
+    fn wait_for_compute_ctl_to_exit(&self) -> Result<()> {
+        // TODO use background_process::stop_process instead
+        let pidfile_path = self.endpoint_path().join("compute_ctl.pid");
+        let pid: u32 = std::fs::read_to_string(pidfile_path)?.parse()?;
+        let pid = nix::unistd::Pid::from_raw(pid as i32);
+        crate::background_process::wait_until_stopped("compute_ctl", pid)?;
+        Ok(())
+    }
+
+    fn read_postgresql_conf(&self) -> Result<String> {
+        // Slurp the endpoints/<endpoint id>/postgresql.conf file into
+        // memory. We will include it in the spec file that we pass to
+        // `compute_ctl`, and `compute_ctl` will write it to the postgresql.conf
+        // in the data directory.
+        let postgresql_conf_path = self.endpoint_path().join("postgresql.conf");
+        match std::fs::read(&postgresql_conf_path) {
+            Ok(content) => Ok(String::from_utf8(content)?),
+            Err(e) if e.kind() == std::io::ErrorKind::NotFound => Ok("".to_string()),
+            Err(e) => Err(anyhow::Error::new(e).context(format!(
+                "failed to read config file in {}",
+                postgresql_conf_path.to_str().unwrap()
+            ))),
+        }
+    }
+
+    pub fn start(
+        &self,
+        auth_token: &Option<String>,
+        safekeepers: Vec<NodeId>,
+        remote_ext_config: Option<&String>,
+    ) -> Result<()> {
+        if self.status() == "running" {
+            anyhow::bail!("The endpoint is already running");
+        }
+
+        let postgresql_conf = self.read_postgresql_conf()?;
+
+        // We always start the compute node from scratch, so if the Postgres
+        // data dir exists from a previous launch, remove it first.
+        if self.pgdata().exists() {
+            std::fs::remove_dir_all(self.pgdata())?;
+        }
+
+        let pageserver_connstring = {
+            let config = &self.pageserver.pg_connection_config;
+            let (host, port) = (config.host(), config.port());
+
+            // NOTE: avoid spaces in connection string, because it is less error prone if we forward it somewhere.
+            format!("postgresql://no_user@{host}:{port}")
+        };
+        let mut safekeeper_connstrings = Vec::new();
+        if self.mode == ComputeMode::Primary {
+            for sk_id in safekeepers {
+                let sk = self
+                    .env
+                    .safekeepers
+                    .iter()
+                    .find(|node| node.id == sk_id)
+                    .ok_or_else(|| anyhow!("safekeeper {sk_id} does not exist"))?;
+                safekeeper_connstrings.push(format!("127.0.0.1:{}", sk.get_compute_port()));
+            }
+        }
+
+        // Create spec file
+        let spec = ComputeSpec {
+            skip_pg_catalog_updates: self.skip_pg_catalog_updates,
+            format_version: 1.0,
+            operation_uuid: None,
+            cluster: Cluster {
+                cluster_id: None, // project ID: not used
+                name: None,       // project name: not used
+                state: None,
+                roles: vec![],
+                databases: vec![],
+                settings: None,
+                postgresql_conf: Some(postgresql_conf),
+            },
+            delta_operations: None,
+            tenant_id: Some(self.tenant_id),
+            timeline_id: Some(self.timeline_id),
+            mode: self.mode,
+            pageserver_connstring: Some(pageserver_connstring),
+            safekeeper_connstrings,
+            storage_auth_token: auth_token.clone(),
+            remote_extensions: None,
+        };
+        let spec_path = self.endpoint_path().join("spec.json");
+        std::fs::write(spec_path, serde_json::to_string_pretty(&spec)?)?;
+
+        // Open log file. We'll redirect the stdout and stderr of `compute_ctl` to it.
+        let logfile = std::fs::OpenOptions::new()
+            .create(true)
+            .append(true)
+            .open(self.endpoint_path().join("compute.log"))?;
+
+        // Launch compute_ctl
+        println!("Starting postgres node at '{}'", self.connstr());
+        let mut cmd = Command::new(self.env.neon_distrib_dir.join("compute_ctl"));
+        cmd.args(["--http-port", &self.http_address.port().to_string()])
+            .args(["--pgdata", self.pgdata().to_str().unwrap()])
+            .args(["--connstr", &self.connstr()])
+            .args([
+                "--spec-path",
+                self.endpoint_path().join("spec.json").to_str().unwrap(),
+            ])
+            .args([
+                "--pgbin",
+                self.env
+                    .pg_bin_dir(self.pg_version)?
+                    .join("postgres")
+                    .to_str()
+                    .unwrap(),
+            ])
+            .stdin(std::process::Stdio::null())
+            .stderr(logfile.try_clone()?)
+            .stdout(logfile);
+
+        if let Some(remote_ext_config) = remote_ext_config {
+            cmd.args(["--remote-ext-config", remote_ext_config]);
+        }
+
+        let child = cmd.spawn()?;
+
+        // Write down the pid so we can wait for it when we want to stop
+        // TODO use background_process::start_process instead
+        let pid = child.id();
+        let pidfile_path = self.endpoint_path().join("compute_ctl.pid");
+        std::fs::write(pidfile_path, pid.to_string())?;
+
+        // Wait for it to start
+        let mut attempt = 0;
+        const ATTEMPT_INTERVAL: Duration = Duration::from_millis(100);
+        const MAX_ATTEMPTS: u32 = 10 * 30; // Wait up to 30 s
+        loop {
+            attempt += 1;
+            match self.get_status() {
+                Ok(state) => {
+                    match state.status {
+                        ComputeStatus::Init => {
+                            if attempt == MAX_ATTEMPTS {
+                                bail!("compute startup timed out; still in Init state");
+                            }
+                            // keep retrying
+                        }
+                        ComputeStatus::Running => {
+                            // All good!
+                            break;
+                        }
+                        ComputeStatus::Failed => {
+                            bail!(
+                                "compute startup failed: {}",
+                                state
+                                    .error
+                                    .as_deref()
+                                    .unwrap_or("<no error from compute_ctl>")
+                            );
+                        }
+                        ComputeStatus::Empty
+                        | ComputeStatus::ConfigurationPending
+                        | ComputeStatus::Configuration => {
+                            bail!("unexpected compute status: {:?}", state.status)
+                        }
+                    }
+                }
+                Err(e) => {
+                    if attempt == MAX_ATTEMPTS {
+                        return Err(e).context("timed out waiting to connect to compute_ctl HTTP");
+                    }
+                }
+            }
+            std::thread::sleep(ATTEMPT_INTERVAL);
+        }
+
+        Ok(())
+    }
+
+    // Call the /status HTTP API
+    pub fn get_status(&self) -> Result<ComputeState> {
+        let client = reqwest::blocking::Client::new();
+
+        let response = client
+            .request(
+                reqwest::Method::GET,
+                format!(
+                    "http://{}:{}/status",
+                    self.http_address.ip(),
+                    self.http_address.port()
+                ),
+            )
+            .send()?;
+
+        // Interpret the response
+        let status = response.status();
+        if !(status.is_client_error() || status.is_server_error()) {
+            Ok(response.json()?)
+        } else {
+            // reqwest does not export its error construction utility functions, so let's craft the message ourselves
+            let url = response.url().to_owned();
+            let msg = match response.text() {
+                Ok(err_body) => format!("Error: {}", err_body),
+                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
+            };
+            Err(anyhow::anyhow!(msg))
+        }
+    }
+
+    pub fn reconfigure(&self, pageserver_id: Option<NodeId>) -> Result<()> {
+        let mut spec: ComputeSpec = {
+            let spec_path = self.endpoint_path().join("spec.json");
+            let file = std::fs::File::open(spec_path)?;
+            serde_json::from_reader(file)?
+        };
+
+        let postgresql_conf = self.read_postgresql_conf()?;
+        spec.cluster.postgresql_conf = Some(postgresql_conf);
+
+        if let Some(pageserver_id) = pageserver_id {
+            let endpoint_config_path = self.endpoint_path().join("endpoint.json");
+            let mut endpoint_conf: EndpointConf = {
+                let file = std::fs::File::open(&endpoint_config_path)?;
+                serde_json::from_reader(file)?
+            };
+            endpoint_conf.pageserver_id = pageserver_id;
+            std::fs::write(
+                endpoint_config_path,
+                serde_json::to_string_pretty(&endpoint_conf)?,
+            )?;
+
+            let pageserver =
+                PageServerNode::from_env(&self.env, self.env.get_pageserver_conf(pageserver_id)?);
+            let ps_http_conf = &pageserver.pg_connection_config;
+            let (host, port) = (ps_http_conf.host(), ps_http_conf.port());
+            spec.pageserver_connstring = Some(format!("postgresql://no_user@{host}:{port}"));
+        }
+
+        let client = reqwest::blocking::Client::new();
+        let response = client
+            .post(format!(
+                "http://{}:{}/configure",
+                self.http_address.ip(),
+                self.http_address.port()
+            ))
+            .body(format!(
+                "{{\"spec\":{}}}",
+                serde_json::to_string_pretty(&spec)?
+            ))
+            .send()?;
+
+        let status = response.status();
+        if !(status.is_client_error() || status.is_server_error()) {
+            Ok(())
+        } else {
+            let url = response.url().to_owned();
+            let msg = match response.text() {
+                Ok(err_body) => format!("Error: {}", err_body),
+                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
+            };
+            Err(anyhow::anyhow!(msg))
+        }
+    }
+
+    pub fn stop(&self, destroy: bool) -> Result<()> {
+        // If we are going to destroy data directory,
+        // use immediate shutdown mode, otherwise,
+        // shutdown gracefully to leave the data directory sane.
+        //
+        // Postgres is always started from scratch, so stop
+        // without destroy only used for testing and debugging.
+        //
+        self.pg_ctl(
+            if destroy {
+                &["-m", "immediate", "stop"]
+            } else {
+                &["stop"]
+            },
+            &None,
+        )?;
+
+        // Also wait for the compute_ctl process to die. It might have some cleanup
+        // work to do after postgres stops, like syncing safekeepers, etc.
+        //
+        self.wait_for_compute_ctl_to_exit()?;
+        if destroy {
+            println!(
+                "Destroying postgres data directory '{}'",
+                self.pgdata().to_str().unwrap()
+            );
+            std::fs::remove_dir_all(self.endpoint_path())?;
+        }
+        Ok(())
+    }
+
+    pub fn connstr(&self) -> String {
+        format!(
+            "postgresql://{}@{}:{}/{}",
+            "cloud_admin",
+            self.pg_address.ip(),
+            self.pg_address.port(),
+            "postgres"
+        )
+    }
+}

control_plane/src/lib.rs

@@ -1,12 +1,16 @@
-//
-// Local control plane.
-//
-// Can start, cofigure and stop postgres instances running as a local processes.
-//
-// Intended to be used in integration tests and in CLI tools for
-// local installations.
-//
+//! Local control plane.
+//!
+//! Can start, configure and stop postgres instances running as a local processes.
+//!
+//! Intended to be used in integration tests and in CLI tools for
+//! local installations.
+#![deny(clippy::undocumented_unsafe_blocks)]
 
-pub mod compute;
+pub mod attachment_service;
+mod background_process;
+pub mod broker;
+pub mod endpoint;
 pub mod local_env;
-pub mod storage;
+pub mod pageserver;
+pub mod postgresql_conf;
+pub mod safekeeper;

control_plane/src/local_env.rs

@@ -1,389 +1,550 @@
-//
-// This module is responsible for locating and loading paths in a local setup.
-//
-// Now it also provides init method which acts like a stub for proper installation
-// script which will use local paths.
-//
-use anyhow::Context;
-use bytes::Bytes;
-use rand::Rng;
+//! This module is responsible for locating and loading paths in a local setup.
+//!
+//! Now it also provides init method which acts like a stub for proper installation
+//! script which will use local paths.
+
+use anyhow::{bail, ensure, Context};
+
+use postgres_backend::AuthType;
+use reqwest::Url;
+use serde::{Deserialize, Serialize};
+use std::collections::HashMap;
 use std::env;
 use std::fs;
+use std::net::IpAddr;
+use std::net::Ipv4Addr;
+use std::net::SocketAddr;
 use std::path::{Path, PathBuf};
 use std::process::{Command, Stdio};
+use utils::{
+    auth::{encode_from_key_file, Claims},
+    id::{NodeId, TenantId, TenantTimelineId, TimelineId},
+};
 
-use anyhow::Result;
-use serde_derive::{Deserialize, Serialize};
+use crate::safekeeper::SafekeeperNode;
 
-use pageserver::ZTimelineId;
-use walkeeper::xlog_utils;
+pub const DEFAULT_PG_VERSION: u32 = 15;
 
 //
-// This data structure represents deserialized zenith config, which should be
-// located in ~/.zenith
+// This data structures represents neon_local CLI config
 //
-// TODO: should we also support ZENITH_CONF env var?
+// It is deserialized from the .neon/config file, or the config file passed
+// to 'neon_local init --config=<path>' option. See control_plane/simple.conf for
+// an example.
 //
-#[derive(Serialize, Deserialize, Clone)]
+#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
 pub struct LocalEnv {
-    // Path to the Repository. Here page server and compute nodes will create and store their data.
-    pub repo_path: PathBuf,
-
-    // System identifier, from the PostgreSQL control file
-    pub systemid: u64,
+    // Base directory for all the nodes (the pageserver, safekeepers and
+    // compute endpoints).
+    //
+    // This is not stored in the config file. Rather, this is the path where the
+    // config file itself is. It is read from the NEON_REPO_DIR env variable or
+    // '.neon' if not given.
+    #[serde(skip)]
+    pub base_data_dir: PathBuf,
 
     // Path to postgres distribution. It's expected that "bin", "include",
     // "lib", "share" from postgres distribution are there. If at some point
     // in time we will be able to run against vanilla postgres we may split that
     // to four separate paths and match OS-specific installation layout.
+    #[serde(default)]
     pub pg_distrib_dir: PathBuf,
 
     // Path to pageserver binary.
-    pub zenith_distrib_dir: PathBuf,
+    #[serde(default)]
+    pub neon_distrib_dir: PathBuf,
+
+    // Default tenant ID to use with the 'neon_local' command line utility, when
+    // --tenant_id is not explicitly specified.
+    #[serde(default)]
+    pub default_tenant_id: Option<TenantId>,
+
+    // used to issue tokens during e.g pg start
+    #[serde(default)]
+    pub private_key_path: PathBuf,
+
+    pub broker: NeonBroker,
+
+    /// This Vec must always contain at least one pageserver
+    pub pageservers: Vec<PageServerConf>,
+
+    #[serde(default)]
+    pub safekeepers: Vec<SafekeeperConf>,
+
+    // Control plane location: if None, we will not run attachment_service.  If set, this will
+    // be propagated into each pageserver's configuration.
+    #[serde(default)]
+    pub control_plane_api: Option<Url>,
+
+    /// Keep human-readable aliases in memory (and persist them to config), to hide ZId hex strings from the user.
+    #[serde(default)]
+    // A `HashMap<String, HashMap<TenantId, TimelineId>>` would be more appropriate here,
+    // but deserialization into a generic toml object as `toml::Value::try_from` fails with an error.
+    // https://toml.io/en/v1.0.0 does not contain a concept of "a table inside another table".
+    branch_name_mappings: HashMap<String, Vec<(TenantId, TimelineId)>>,
+}
+
+/// Broker config for cluster internal communication.
+#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
+#[serde(default)]
+pub struct NeonBroker {
+    /// Broker listen address for storage nodes coordination, e.g. '127.0.0.1:50051'.
+    pub listen_addr: SocketAddr,
+}
+
+// Dummy Default impl to satisfy Deserialize derive.
+impl Default for NeonBroker {
+    fn default() -> Self {
+        NeonBroker {
+            listen_addr: SocketAddr::new(IpAddr::V4(Ipv4Addr::new(0, 0, 0, 0)), 0),
+        }
+    }
+}
+
+impl NeonBroker {
+    pub fn client_url(&self) -> Url {
+        Url::parse(&format!("http://{}", self.listen_addr)).expect("failed to construct url")
+    }
+}
+
+#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
+#[serde(default)]
+pub struct PageServerConf {
+    // node id
+    pub id: NodeId,
+
+    // Pageserver connection settings
+    pub listen_pg_addr: String,
+    pub listen_http_addr: String,
+
+    // auth type used for the PG and HTTP ports
+    pub pg_auth_type: AuthType,
+    pub http_auth_type: AuthType,
+}
+
+impl Default for PageServerConf {
+    fn default() -> Self {
+        Self {
+            id: NodeId(0),
+            listen_pg_addr: String::new(),
+            listen_http_addr: String::new(),
+            pg_auth_type: AuthType::Trust,
+            http_auth_type: AuthType::Trust,
+        }
+    }
+}
+
+#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug)]
+#[serde(default)]
+pub struct SafekeeperConf {
+    pub id: NodeId,
+    pub pg_port: u16,
+    pub pg_tenant_only_port: Option<u16>,
+    pub http_port: u16,
+    pub sync: bool,
+    pub remote_storage: Option<String>,
+    pub backup_threads: Option<u32>,
+    pub auth_enabled: bool,
+}
+
+impl Default for SafekeeperConf {
+    fn default() -> Self {
+        Self {
+            id: NodeId(0),
+            pg_port: 0,
+            pg_tenant_only_port: None,
+            http_port: 0,
+            sync: true,
+            remote_storage: None,
+            backup_threads: None,
+            auth_enabled: false,
+        }
+    }
+}
+
+impl SafekeeperConf {
+    /// Compute is served by port on which only tenant scoped tokens allowed, if
+    /// it is configured.
+    pub fn get_compute_port(&self) -> u16 {
+        self.pg_tenant_only_port.unwrap_or(self.pg_port)
+    }
 }
 
 impl LocalEnv {
-    // postgres installation
-    pub fn pg_bin_dir(&self) -> PathBuf {
-        self.pg_distrib_dir.join("bin")
-    }
-    pub fn pg_lib_dir(&self) -> PathBuf {
-        self.pg_distrib_dir.join("lib")
-    }
-}
-
-fn zenith_repo_dir() -> PathBuf {
-    // Find repository path
-    match std::env::var_os("ZENITH_REPO_DIR") {
-        Some(val) => PathBuf::from(val.to_str().unwrap()),
-        None => ".zenith".into(),
-    }
-}
-
-//
-// Initialize a new Zenith repository
-//
-pub fn init() -> Result<()> {
-    // check if config already exists
-    let repo_path = zenith_repo_dir();
-    if repo_path.exists() {
-        anyhow::bail!(
-            "{} already exists. Perhaps already initialized?",
-            repo_path.to_str().unwrap()
-        );
+    pub fn pg_distrib_dir_raw(&self) -> PathBuf {
+        self.pg_distrib_dir.clone()
     }
 
-    // Now we can run init only from crate directory, so check that current dir is our crate.
-    // Use 'pageserver/Cargo.toml' existence as evidendce.
-    let cargo_path = env::current_dir()?;
-    if !cargo_path.join("pageserver/Cargo.toml").exists() {
-        anyhow::bail!(
-            "Current dirrectory does not look like a zenith repo. \
-            Please, run 'init' from zenith repo root."
-        );
-    }
+    pub fn pg_distrib_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
+        let path = self.pg_distrib_dir.clone();
 
-    // ok, now check that expected binaries are present
-
-    // check postgres
-    let pg_distrib_dir = cargo_path.join("tmp_install");
-    let pg_path = pg_distrib_dir.join("bin/postgres");
-    if !pg_path.exists() {
-        anyhow::bail!(
-            "Can't find postres binary at {}. \
-                       Perhaps './pgbuild.sh' is needed to build it first.",
-            pg_path.to_str().unwrap()
-        );
-    }
-
-    // check pageserver
-    let zenith_distrib_dir = cargo_path.join("target/debug/");
-    let pageserver_path = zenith_distrib_dir.join("pageserver");
-    if !pageserver_path.exists() {
-        anyhow::bail!(
-            "Can't find pageserver binary at {}. Please build it.",
-            pageserver_path.to_str().unwrap()
-        );
-    }
-
-    // ok, we are good to go
-    let mut conf = LocalEnv {
-        repo_path: repo_path.clone(),
-        pg_distrib_dir,
-        zenith_distrib_dir,
-        systemid: 0,
-    };
-    init_repo(&mut conf)?;
-
-    Ok(())
-}
-
-pub fn init_repo(local_env: &mut LocalEnv) -> Result<()> {
-    let repopath = &local_env.repo_path;
-    fs::create_dir(&repopath)
-        .with_context(|| format!("could not create directory {}", repopath.display()))?;
-    fs::create_dir(repopath.join("pgdatadirs"))?;
-    fs::create_dir(repopath.join("timelines"))?;
-    fs::create_dir(repopath.join("refs"))?;
-    fs::create_dir(repopath.join("refs").join("branches"))?;
-    fs::create_dir(repopath.join("refs").join("tags"))?;
-    println!("created directory structure in {}", repopath.display());
-
-    // Create initial timeline
-    let tli = create_timeline(&local_env, None)?;
-    let timelinedir = repopath.join("timelines").join(tli.to_string());
-    println!("created initial timeline {}", timelinedir.display());
-
-    // Run initdb
-    //
-    // FIXME: we create it temporarily in "tmp" directory, and move it into
-    // the repository. Use "tempdir()" or something? Or just create it directly
-    // in the repo?
-    let initdb_path = local_env.pg_bin_dir().join("initdb");
-    let _initdb = Command::new(initdb_path)
-        .args(&["-D", "tmp"])
-        .arg("--no-instructions")
-        .env_clear()
-        .env("LD_LIBRARY_PATH", local_env.pg_lib_dir().to_str().unwrap())
-        .stdout(Stdio::null())
-        .status()
-        .with_context(|| "failed to execute initdb")?;
-    println!("initdb succeeded");
-
-    // Read control file to extract the LSN and system id
-    let controlfile =
-        postgres_ffi::decode_pg_control(Bytes::from(fs::read("tmp/global/pg_control")?))?;
-    let systemid = controlfile.system_identifier;
-    let lsn = controlfile.checkPoint;
-    let lsnstr = format!("{:016X}", lsn);
-
-    // Move the initial WAL file
-    fs::rename(
-        "tmp/pg_wal/000000010000000000000001",
-        timelinedir
-            .join("wal")
-            .join("000000010000000000000001.partial"),
-    )?;
-    println!("moved initial WAL file");
-
-    // Remove pg_wal
-    fs::remove_dir_all("tmp/pg_wal")?;
-    println!("removed tmp/pg_wal");
-
-    force_crash_recovery(&PathBuf::from("tmp"))?;
-    println!("updated pg_control");
-
-    let target = timelinedir.join("snapshots").join(&lsnstr);
-    fs::rename("tmp", &target)?;
-    println!("moved 'tmp' to {}", target.display());
-
-    // Create 'main' branch to refer to the initial timeline
-    let data = tli.to_string();
-    fs::write(repopath.join("refs").join("branches").join("main"), data)?;
-    println!("created main branch");
-
-    // Also update the system id in the LocalEnv
-    local_env.systemid = systemid;
-
-    // write config
-    let toml = toml::to_string(&local_env)?;
-    fs::write(repopath.join("config"), toml)?;
-
-    println!(
-        "new zenith repository was created in {}",
-        repopath.display()
-    );
-
-    Ok(())
-}
-
-// If control file says the cluster was shut down cleanly, modify it, to mark
-// it as crashed. That forces crash recovery when you start the cluster.
-//
-// FIXME:
-// We currently do this to the initial snapshot in "zenith init". It would
-// be more natural to do this when the snapshot is restored instead, but we
-// currently don't have any code to create new snapshots, so it doesn't matter
-// Or better yet, use a less hacky way of putting the cluster into recovery.
-// Perhaps create a backup label file in the data directory when it's restored.
-fn force_crash_recovery(datadir: &Path) -> Result<()> {
-    // Read in the control file
-    let controlfilepath = datadir.to_path_buf().join("global").join("pg_control");
-    let mut controlfile =
-        postgres_ffi::decode_pg_control(Bytes::from(fs::read(controlfilepath.as_path())?))?;
-
-    controlfile.state = postgres_ffi::DBState_DB_IN_PRODUCTION;
-
-    fs::write(
-        controlfilepath.as_path(),
-        postgres_ffi::encode_pg_control(controlfile),
-    )?;
-
-    Ok(())
-}
-
-// check that config file is present
-pub fn load_config(repopath: &Path) -> Result<LocalEnv> {
-    if !repopath.exists() {
-        anyhow::bail!(
-            "Zenith config is not found in {}. You need to run 'zenith init' first",
-            repopath.to_str().unwrap()
-        );
-    }
-
-    // load and parse file
-    let config = fs::read_to_string(repopath.join("config"))?;
-    toml::from_str(config.as_str()).map_err(|e| e.into())
-}
-
-// local env for tests
-pub fn test_env(testname: &str) -> LocalEnv {
-    fs::create_dir_all("../tmp_check").expect("could not create directory ../tmp_check");
-
-    let repo_path = Path::new(env!("CARGO_MANIFEST_DIR"))
-        .join("../tmp_check/")
-        .join(testname);
-
-    // Remove remnants of old test repo
-    let _ = fs::remove_dir_all(&repo_path);
-
-    let mut local_env = LocalEnv {
-        repo_path,
-        pg_distrib_dir: Path::new(env!("CARGO_MANIFEST_DIR")).join("../tmp_install"),
-        zenith_distrib_dir: cargo_bin_dir(),
-        systemid: 0,
-    };
-    init_repo(&mut local_env).expect("could not initialize zenith repository");
-    return local_env;
-}
-
-// Find the directory where the binaries were put (i.e. target/debug/)
-pub fn cargo_bin_dir() -> PathBuf {
-    let mut pathbuf = std::env::current_exe().unwrap();
-
-    pathbuf.pop();
-    if pathbuf.ends_with("deps") {
-        pathbuf.pop();
-    }
-
-    return pathbuf;
-}
-
-#[derive(Debug, Clone, Copy)]
-pub struct PointInTime {
-    pub timelineid: ZTimelineId,
-    pub lsn: u64,
-}
-
-fn create_timeline(local_env: &LocalEnv, ancestor: Option<PointInTime>) -> Result<ZTimelineId> {
-    let repopath = &local_env.repo_path;
-
-    // Create initial timeline
-    let mut tli_buf = [0u8; 16];
-    rand::thread_rng().fill(&mut tli_buf);
-    let timelineid = ZTimelineId::from(tli_buf);
-
-    let timelinedir = repopath.join("timelines").join(timelineid.to_string());
-
-    fs::create_dir(&timelinedir)?;
-    fs::create_dir(&timelinedir.join("snapshots"))?;
-    fs::create_dir(&timelinedir.join("wal"))?;
-
-    if let Some(ancestor) = ancestor {
-        let data = format!(
-            "{}@{:X}/{:X}",
-            ancestor.timelineid,
-            ancestor.lsn >> 32,
-            ancestor.lsn & 0xffffffff
-        );
-        fs::write(timelinedir.join("ancestor"), data)?;
-    }
-
-    Ok(timelineid)
-}
-
-// Parse an LSN in the format used in filenames
-//
-// For example: 00000000015D3DD8
-//
-fn parse_lsn(s: &str) -> std::result::Result<u64, std::num::ParseIntError> {
-    u64::from_str_radix(s, 16)
-}
-
-// Create a new branch in the repository (for the "zenith branch" subcommand)
-pub fn create_branch(
-    local_env: &LocalEnv,
-    branchname: &str,
-    startpoint: PointInTime,
-) -> Result<()> {
-    let repopath = &local_env.repo_path;
-
-    // create a new timeline for it
-    let newtli = create_timeline(local_env, Some(startpoint))?;
-    let newtimelinedir = repopath.join("timelines").join(newtli.to_string());
-
-    let data = newtli.to_string();
-    fs::write(
-        repopath.join("refs").join("branches").join(branchname),
-        data,
-    )?;
-
-    // Copy the latest snapshot (TODO: before the startpoint) and all WAL
-    // TODO: be smarter and avoid the copying...
-    let (_maxsnapshot, oldsnapshotdir) = find_latest_snapshot(local_env, startpoint.timelineid)?;
-    let copy_opts = fs_extra::dir::CopyOptions::new();
-    fs_extra::dir::copy(oldsnapshotdir, newtimelinedir.join("snapshots"), &copy_opts)?;
-
-    let oldtimelinedir = repopath
-        .join("timelines")
-        .join(startpoint.timelineid.to_string());
-    let mut copy_opts = fs_extra::dir::CopyOptions::new();
-    copy_opts.content_only = true;
-    fs_extra::dir::copy(
-        oldtimelinedir.join("wal"),
-        newtimelinedir.join("wal"),
-        &copy_opts,
-    )?;
-
-    Ok(())
-}
-
-// Find the end of valid WAL in a wal directory
-pub fn find_end_of_wal(local_env: &LocalEnv, timeline: ZTimelineId) -> Result<u64> {
-    let repopath = &local_env.repo_path;
-    let waldir = repopath
-        .join("timelines")
-        .join(timeline.to_string())
-        .join("wal");
-
-    let (lsn, _tli) = xlog_utils::find_end_of_wal(&waldir, 16 * 1024 * 1024, true);
-
-    return Ok(lsn);
-}
-
-// Find the latest snapshot for a timeline
-fn find_latest_snapshot(local_env: &LocalEnv, timeline: ZTimelineId) -> Result<(u64, PathBuf)> {
-    let repopath = &local_env.repo_path;
-
-    let snapshotsdir = repopath
-        .join("timelines")
-        .join(timeline.to_string())
-        .join("snapshots");
-    let paths = fs::read_dir(&snapshotsdir)?;
-    let mut maxsnapshot: u64 = 0;
-    let mut snapshotdir: Option<PathBuf> = None;
-    for path in paths {
-        let path = path?;
-        let filename = path.file_name().to_str().unwrap().to_owned();
-        if let Ok(lsn) = parse_lsn(&filename) {
-            maxsnapshot = std::cmp::max(lsn, maxsnapshot);
-            snapshotdir = Some(path.path());
+        #[allow(clippy::manual_range_patterns)]
+        match pg_version {
+            14 | 15 | 16 => Ok(path.join(format!("v{pg_version}"))),
+            _ => bail!("Unsupported postgres version: {}", pg_version),
         }
     }
-    if maxsnapshot == 0 {
-        // TODO: check ancestor timeline
-        anyhow::bail!("no snapshot found in {}", snapshotsdir.display());
+
+    pub fn pg_bin_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
+        Ok(self.pg_distrib_dir(pg_version)?.join("bin"))
+    }
+    pub fn pg_lib_dir(&self, pg_version: u32) -> anyhow::Result<PathBuf> {
+        Ok(self.pg_distrib_dir(pg_version)?.join("lib"))
     }
 
-    Ok((maxsnapshot, snapshotdir.unwrap()))
+    pub fn pageserver_bin(&self) -> PathBuf {
+        self.neon_distrib_dir.join("pageserver")
+    }
+
+    pub fn attachment_service_bin(&self) -> PathBuf {
+        self.neon_distrib_dir.join("attachment_service")
+    }
+
+    pub fn safekeeper_bin(&self) -> PathBuf {
+        self.neon_distrib_dir.join("safekeeper")
+    }
+
+    pub fn storage_broker_bin(&self) -> PathBuf {
+        self.neon_distrib_dir.join("storage_broker")
+    }
+
+    pub fn endpoints_path(&self) -> PathBuf {
+        self.base_data_dir.join("endpoints")
+    }
+
+    pub fn pageserver_data_dir(&self, pageserver_id: NodeId) -> PathBuf {
+        self.base_data_dir
+            .join(format!("pageserver_{pageserver_id}"))
+    }
+
+    pub fn safekeeper_data_dir(&self, data_dir_name: &str) -> PathBuf {
+        self.base_data_dir.join("safekeepers").join(data_dir_name)
+    }
+
+    pub fn get_pageserver_conf(&self, id: NodeId) -> anyhow::Result<&PageServerConf> {
+        if let Some(conf) = self.pageservers.iter().find(|node| node.id == id) {
+            Ok(conf)
+        } else {
+            bail!("could not find pageserver {id}")
+        }
+    }
+
+    pub fn register_branch_mapping(
+        &mut self,
+        branch_name: String,
+        tenant_id: TenantId,
+        timeline_id: TimelineId,
+    ) -> anyhow::Result<()> {
+        let existing_values = self
+            .branch_name_mappings
+            .entry(branch_name.clone())
+            .or_default();
+
+        let existing_ids = existing_values
+            .iter()
+            .find(|(existing_tenant_id, _)| existing_tenant_id == &tenant_id);
+
+        if let Some((_, old_timeline_id)) = existing_ids {
+            if old_timeline_id == &timeline_id {
+                Ok(())
+            } else {
+                bail!("branch '{branch_name}' is already mapped to timeline {old_timeline_id}, cannot map to another timeline {timeline_id}");
+            }
+        } else {
+            existing_values.push((tenant_id, timeline_id));
+            Ok(())
+        }
+    }
+
+    pub fn get_branch_timeline_id(
+        &self,
+        branch_name: &str,
+        tenant_id: TenantId,
+    ) -> Option<TimelineId> {
+        self.branch_name_mappings
+            .get(branch_name)?
+            .iter()
+            .find(|(mapped_tenant_id, _)| mapped_tenant_id == &tenant_id)
+            .map(|&(_, timeline_id)| timeline_id)
+            .map(TimelineId::from)
+    }
+
+    pub fn timeline_name_mappings(&self) -> HashMap<TenantTimelineId, String> {
+        self.branch_name_mappings
+            .iter()
+            .flat_map(|(name, tenant_timelines)| {
+                tenant_timelines.iter().map(|&(tenant_id, timeline_id)| {
+                    (TenantTimelineId::new(tenant_id, timeline_id), name.clone())
+                })
+            })
+            .collect()
+    }
+
+    /// Create a LocalEnv from a config file.
+    ///
+    /// Unlike 'load_config', this function fills in any defaults that are missing
+    /// from the config file.
+    pub fn parse_config(toml: &str) -> anyhow::Result<Self> {
+        let mut env: LocalEnv = toml::from_str(toml)?;
+
+        // Find postgres binaries.
+        // Follow POSTGRES_DISTRIB_DIR if set, otherwise look in "pg_install".
+        // Note that later in the code we assume, that distrib dirs follow the same pattern
+        // for all postgres versions.
+        if env.pg_distrib_dir == Path::new("") {
+            if let Some(postgres_bin) = env::var_os("POSTGRES_DISTRIB_DIR") {
+                env.pg_distrib_dir = postgres_bin.into();
+            } else {
+                let cwd = env::current_dir()?;
+                env.pg_distrib_dir = cwd.join("pg_install")
+            }
+        }
+
+        // Find neon binaries.
+        if env.neon_distrib_dir == Path::new("") {
+            env.neon_distrib_dir = env::current_exe()?.parent().unwrap().to_owned();
+        }
+
+        if env.pageservers.is_empty() {
+            anyhow::bail!("Configuration must contain at least one pageserver");
+        }
+
+        env.base_data_dir = base_path();
+
+        Ok(env)
+    }
+
+    /// Locate and load config
+    pub fn load_config() -> anyhow::Result<Self> {
+        let repopath = base_path();
+
+        if !repopath.exists() {
+            bail!(
+                "Neon config is not found in {}. You need to run 'neon_local init' first",
+                repopath.to_str().unwrap()
+            );
+        }
+
+        // TODO: check that it looks like a neon repository
+
+        // load and parse file
+        let config = fs::read_to_string(repopath.join("config"))?;
+        let mut env: LocalEnv = toml::from_str(config.as_str())?;
+
+        env.base_data_dir = repopath;
+
+        Ok(env)
+    }
+
+    pub fn persist_config(&self, base_path: &Path) -> anyhow::Result<()> {
+        // Currently, the user first passes a config file with 'neon_local init --config=<path>'
+        // We read that in, in `create_config`, and fill any missing defaults. Then it's saved
+        // to .neon/config. TODO: We lose any formatting and comments along the way, which is
+        // a bit sad.
+        let mut conf_content = r#"# This file describes a local deployment of the page server
+# and safekeeeper node. It is read by the 'neon_local' command-line
+# utility.
+"#
+        .to_string();
+
+        // Convert the LocalEnv to a toml file.
+        //
+        // This could be as simple as this:
+        //
+        // conf_content += &toml::to_string_pretty(env)?;
+        //
+        // But it results in a "values must be emitted before tables". I'm not sure
+        // why, AFAICS the table, i.e. 'safekeepers: Vec<SafekeeperConf>' is last.
+        // Maybe rust reorders the fields to squeeze avoid padding or something?
+        // In any case, converting to toml::Value first, and serializing that, works.
+        // See https://github.com/alexcrichton/toml-rs/issues/142
+        conf_content += &toml::to_string_pretty(&toml::Value::try_from(self)?)?;
+
+        let target_config_path = base_path.join("config");
+        fs::write(&target_config_path, conf_content).with_context(|| {
+            format!(
+                "Failed to write config file into path '{}'",
+                target_config_path.display()
+            )
+        })
+    }
+
+    // this function is used only for testing purposes in CLI e g generate tokens during init
+    pub fn generate_auth_token(&self, claims: &Claims) -> anyhow::Result<String> {
+        let private_key_path = if self.private_key_path.is_absolute() {
+            self.private_key_path.to_path_buf()
+        } else {
+            self.base_data_dir.join(&self.private_key_path)
+        };
+
+        let key_data = fs::read(private_key_path)?;
+        encode_from_key_file(claims, &key_data)
+    }
+
+    //
+    // Initialize a new Neon repository
+    //
+    pub fn init(&mut self, pg_version: u32, force: bool) -> anyhow::Result<()> {
+        // check if config already exists
+        let base_path = &self.base_data_dir;
+        ensure!(
+            base_path != Path::new(""),
+            "repository base path is missing"
+        );
+
+        if base_path.exists() {
+            if force {
+                println!("removing all contents of '{}'", base_path.display());
+                // instead of directly calling `remove_dir_all`, we keep the original dir but removing
+                // all contents inside. This helps if the developer symbol links another directory (i.e.,
+                // S3 local SSD) to the `.neon` base directory.
+                for entry in std::fs::read_dir(base_path)? {
+                    let entry = entry?;
+                    let path = entry.path();
+                    if path.is_dir() {
+                        fs::remove_dir_all(&path)?;
+                    } else {
+                        fs::remove_file(&path)?;
+                    }
+                }
+            } else {
+                bail!(
+                    "directory '{}' already exists. Perhaps already initialized? (Hint: use --force to remove all contents)",
+                    base_path.display()
+                );
+            }
+        }
+
+        if !self.pg_bin_dir(pg_version)?.join("postgres").exists() {
+            bail!(
+                "Can't find postgres binary at {}",
+                self.pg_bin_dir(pg_version)?.display()
+            );
+        }
+        for binary in ["pageserver", "safekeeper"] {
+            if !self.neon_distrib_dir.join(binary).exists() {
+                bail!(
+                    "Can't find binary '{binary}' in neon distrib dir '{}'",
+                    self.neon_distrib_dir.display()
+                );
+            }
+        }
+
+        if !base_path.exists() {
+            fs::create_dir(base_path)?;
+        }
+
+        // Generate keypair for JWT.
+        //
+        // The keypair is only needed if authentication is enabled in any of the
+        // components. For convenience, we generate the keypair even if authentication
+        // is not enabled, so that you can easily enable it after the initialization
+        // step. However, if the key generation fails, we treat it as non-fatal if
+        // authentication was not enabled.
+        if self.private_key_path == PathBuf::new() {
+            match generate_auth_keys(
+                base_path.join("auth_private_key.pem").as_path(),
+                base_path.join("auth_public_key.pem").as_path(),
+            ) {
+                Ok(()) => {
+                    self.private_key_path = PathBuf::from("auth_private_key.pem");
+                }
+                Err(e) => {
+                    if !self.auth_keys_needed() {
+                        eprintln!("Could not generate keypair for JWT authentication: {e}");
+                        eprintln!("Continuing anyway because authentication was not enabled");
+                        self.private_key_path = PathBuf::from("auth_private_key.pem");
+                    } else {
+                        return Err(e);
+                    }
+                }
+            }
+        }
+
+        fs::create_dir_all(self.endpoints_path())?;
+
+        for safekeeper in &self.safekeepers {
+            fs::create_dir_all(SafekeeperNode::datadir_path_by_id(self, safekeeper.id))?;
+        }
+
+        self.persist_config(base_path)
+    }
+
+    fn auth_keys_needed(&self) -> bool {
+        self.pageservers.iter().any(|ps| {
+            ps.pg_auth_type == AuthType::NeonJWT || ps.http_auth_type == AuthType::NeonJWT
+        }) || self.safekeepers.iter().any(|sk| sk.auth_enabled)
+    }
+}
+
+fn base_path() -> PathBuf {
+    match std::env::var_os("NEON_REPO_DIR") {
+        Some(val) => PathBuf::from(val),
+        None => PathBuf::from(".neon"),
+    }
+}
+
+/// Generate a public/private key pair for JWT authentication
+fn generate_auth_keys(private_key_path: &Path, public_key_path: &Path) -> anyhow::Result<()> {
+    // Generate the key pair
+    //
+    // openssl genpkey -algorithm ed25519 -out auth_private_key.pem
+    let keygen_output = Command::new("openssl")
+        .arg("genpkey")
+        .args(["-algorithm", "ed25519"])
+        .args(["-out", private_key_path.to_str().unwrap()])
+        .stdout(Stdio::null())
+        .output()
+        .context("failed to generate auth private key")?;
+    if !keygen_output.status.success() {
+        bail!(
+            "openssl failed: '{}'",
+            String::from_utf8_lossy(&keygen_output.stderr)
+        );
+    }
+    // Extract the public key from the private key file
+    //
+    // openssl pkey -in auth_private_key.pem -pubout -out auth_public_key.pem
+    let keygen_output = Command::new("openssl")
+        .arg("pkey")
+        .args(["-in", private_key_path.to_str().unwrap()])
+        .arg("-pubout")
+        .args(["-out", public_key_path.to_str().unwrap()])
+        .output()
+        .context("failed to extract public key from private key")?;
+    if !keygen_output.status.success() {
+        bail!(
+            "openssl failed: '{}'",
+            String::from_utf8_lossy(&keygen_output.stderr)
+        );
+    }
+    Ok(())
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn simple_conf_parsing() {
+        let simple_conf_toml = include_str!("../simple.conf");
+        let simple_conf_parse_result = LocalEnv::parse_config(simple_conf_toml);
+        assert!(
+            simple_conf_parse_result.is_ok(),
+            "failed to parse simple config {simple_conf_toml}, reason: {simple_conf_parse_result:?}"
+        );
+
+        let string_to_replace = "listen_addr = '127.0.0.1:50051'";
+        let spoiled_url_str = "listen_addr = '!@$XOXO%^&'";
+        let spoiled_url_toml = simple_conf_toml.replace(string_to_replace, spoiled_url_str);
+        assert!(
+            spoiled_url_toml.contains(spoiled_url_str),
+            "Failed to replace string {string_to_replace} in the toml file {simple_conf_toml}"
+        );
+        let spoiled_url_parse_result = LocalEnv::parse_config(&spoiled_url_toml);
+        assert!(
+            spoiled_url_parse_result.is_err(),
+            "expected toml with invalid Url {spoiled_url_toml} to fail the parsing, but got {spoiled_url_parse_result:?}"
+        );
+    }
 }

control_plane/src/pageserver.rs

@@ -0,0 +1,602 @@
+//! Code to manage pageservers
+//!
+//! In the local test environment, the pageserver stores its data directly in
+//!
+//!   .neon/
+//!
+use std::borrow::Cow;
+use std::collections::HashMap;
+use std::fs::File;
+use std::io::{BufReader, Write};
+use std::num::NonZeroU64;
+use std::path::PathBuf;
+use std::process::{Child, Command};
+use std::{io, result};
+
+use anyhow::{bail, Context};
+use camino::Utf8PathBuf;
+use pageserver_api::models::{self, TenantInfo, TimelineInfo};
+use postgres_backend::AuthType;
+use postgres_connection::{parse_host_port, PgConnectionConfig};
+use reqwest::blocking::{Client, RequestBuilder, Response};
+use reqwest::{IntoUrl, Method};
+use thiserror::Error;
+use utils::auth::{Claims, Scope};
+use utils::{
+    http::error::HttpErrorBody,
+    id::{TenantId, TimelineId},
+    lsn::Lsn,
+};
+
+use crate::local_env::PageServerConf;
+use crate::{background_process, local_env::LocalEnv};
+
+#[derive(Error, Debug)]
+pub enum PageserverHttpError {
+    #[error("Reqwest error: {0}")]
+    Transport(#[from] reqwest::Error),
+
+    #[error("Error: {0}")]
+    Response(String),
+}
+
+impl From<anyhow::Error> for PageserverHttpError {
+    fn from(e: anyhow::Error) -> Self {
+        Self::Response(e.to_string())
+    }
+}
+
+type Result<T> = result::Result<T, PageserverHttpError>;
+
+pub trait ResponseErrorMessageExt: Sized {
+    fn error_from_body(self) -> Result<Self>;
+}
+
+impl ResponseErrorMessageExt for Response {
+    fn error_from_body(self) -> Result<Self> {
+        let status = self.status();
+        if !(status.is_client_error() || status.is_server_error()) {
+            return Ok(self);
+        }
+
+        // reqwest does not export its error construction utility functions, so let's craft the message ourselves
+        let url = self.url().to_owned();
+        Err(PageserverHttpError::Response(
+            match self.json::<HttpErrorBody>() {
+                Ok(err_body) => format!("Error: {}", err_body.msg),
+                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
+            },
+        ))
+    }
+}
+
+//
+// Control routines for pageserver.
+//
+// Used in CLI and tests.
+//
+#[derive(Debug)]
+pub struct PageServerNode {
+    pub pg_connection_config: PgConnectionConfig,
+    pub conf: PageServerConf,
+    pub env: LocalEnv,
+    pub http_client: Client,
+    pub http_base_url: String,
+}
+
+impl PageServerNode {
+    pub fn from_env(env: &LocalEnv, conf: &PageServerConf) -> PageServerNode {
+        let (host, port) =
+            parse_host_port(&conf.listen_pg_addr).expect("Unable to parse listen_pg_addr");
+        let port = port.unwrap_or(5432);
+        Self {
+            pg_connection_config: PgConnectionConfig::new_host_port(host, port),
+            conf: conf.clone(),
+            env: env.clone(),
+            http_client: Client::new(),
+            http_base_url: format!("http://{}/v1", conf.listen_http_addr),
+        }
+    }
+
+    // pageserver conf overrides defined by neon_local configuration.
+    fn neon_local_overrides(&self) -> Vec<String> {
+        let id = format!("id={}", self.conf.id);
+        // FIXME: the paths should be shell-escaped to handle paths with spaces, quotas etc.
+        let pg_distrib_dir_param = format!(
+            "pg_distrib_dir='{}'",
+            self.env.pg_distrib_dir_raw().display()
+        );
+
+        let http_auth_type_param = format!("http_auth_type='{}'", self.conf.http_auth_type);
+        let listen_http_addr_param = format!("listen_http_addr='{}'", self.conf.listen_http_addr);
+
+        let pg_auth_type_param = format!("pg_auth_type='{}'", self.conf.pg_auth_type);
+        let listen_pg_addr_param = format!("listen_pg_addr='{}'", self.conf.listen_pg_addr);
+
+        let broker_endpoint_param = format!("broker_endpoint='{}'", self.env.broker.client_url());
+
+        let mut overrides = vec![
+            id,
+            pg_distrib_dir_param,
+            http_auth_type_param,
+            pg_auth_type_param,
+            listen_http_addr_param,
+            listen_pg_addr_param,
+            broker_endpoint_param,
+        ];
+
+        if let Some(control_plane_api) = &self.env.control_plane_api {
+            overrides.push(format!(
+                "control_plane_api='{}'",
+                control_plane_api.as_str()
+            ));
+        }
+
+        if self.conf.http_auth_type != AuthType::Trust || self.conf.pg_auth_type != AuthType::Trust
+        {
+            // Keys are generated in the toplevel repo dir, pageservers' workdirs
+            // are one level below that, so refer to keys with ../
+            overrides.push("auth_validation_public_key_path='../auth_public_key.pem'".to_owned());
+        }
+        overrides
+    }
+
+    /// Initializes a pageserver node by creating its config with the overrides provided.
+    pub fn initialize(&self, config_overrides: &[&str]) -> anyhow::Result<()> {
+        // First, run `pageserver --init` and wait for it to write a config into FS and exit.
+        self.pageserver_init(config_overrides)
+            .with_context(|| format!("Failed to run init for pageserver node {}", self.conf.id))
+    }
+
+    pub fn repo_path(&self) -> PathBuf {
+        self.env.pageserver_data_dir(self.conf.id)
+    }
+
+    /// The pid file is created by the pageserver process, with its pid stored inside.
+    /// Other pageservers cannot lock the same file and overwrite it for as long as the current
+    /// pageserver runs. (Unless someone removes the file manually; never do that!)
+    fn pid_file(&self) -> Utf8PathBuf {
+        Utf8PathBuf::from_path_buf(self.repo_path().join("pageserver.pid"))
+            .expect("non-Unicode path")
+    }
+
+    pub fn start(&self, config_overrides: &[&str]) -> anyhow::Result<Child> {
+        self.start_node(config_overrides, false)
+    }
+
+    fn pageserver_init(&self, config_overrides: &[&str]) -> anyhow::Result<()> {
+        let datadir = self.repo_path();
+        let node_id = self.conf.id;
+        println!(
+            "Initializing pageserver node {} at '{}' in {:?}",
+            node_id,
+            self.pg_connection_config.raw_address(),
+            datadir
+        );
+        io::stdout().flush()?;
+
+        if !datadir.exists() {
+            std::fs::create_dir(&datadir)?;
+        }
+
+        let datadir_path_str = datadir.to_str().with_context(|| {
+            format!("Cannot start pageserver node {node_id} in path that has no string representation: {datadir:?}")
+        })?;
+        let mut args = self.pageserver_basic_args(config_overrides, datadir_path_str);
+        args.push(Cow::Borrowed("--init"));
+
+        let init_output = Command::new(self.env.pageserver_bin())
+            .args(args.iter().map(Cow::as_ref))
+            .envs(self.pageserver_env_variables()?)
+            .output()
+            .with_context(|| format!("Failed to run pageserver init for node {node_id}"))?;
+
+        anyhow::ensure!(
+            init_output.status.success(),
+            "Pageserver init for node {} did not finish successfully, stdout: {}, stderr: {}",
+            node_id,
+            String::from_utf8_lossy(&init_output.stdout),
+            String::from_utf8_lossy(&init_output.stderr),
+        );
+
+        Ok(())
+    }
+
+    fn start_node(&self, config_overrides: &[&str], update_config: bool) -> anyhow::Result<Child> {
+        let mut overrides = self.neon_local_overrides();
+        overrides.extend(config_overrides.iter().map(|&c| c.to_owned()));
+
+        let datadir = self.repo_path();
+        print!(
+            "Starting pageserver node {} at '{}' in {:?}",
+            self.conf.id,
+            self.pg_connection_config.raw_address(),
+            datadir
+        );
+        io::stdout().flush()?;
+
+        let datadir_path_str = datadir.to_str().with_context(|| {
+            format!(
+                "Cannot start pageserver node {} in path that has no string representation: {:?}",
+                self.conf.id, datadir,
+            )
+        })?;
+        let mut args = self.pageserver_basic_args(config_overrides, datadir_path_str);
+        if update_config {
+            args.push(Cow::Borrowed("--update-config"));
+        }
+
+        background_process::start_process(
+            "pageserver",
+            &datadir,
+            &self.env.pageserver_bin(),
+            args.iter().map(Cow::as_ref),
+            self.pageserver_env_variables()?,
+            background_process::InitialPidFile::Expect(&self.pid_file()),
+            || match self.check_status() {
+                Ok(()) => Ok(true),
+                Err(PageserverHttpError::Transport(_)) => Ok(false),
+                Err(e) => Err(anyhow::anyhow!("Failed to check node status: {e}")),
+            },
+        )
+    }
+
+    fn pageserver_basic_args<'a>(
+        &self,
+        config_overrides: &'a [&'a str],
+        datadir_path_str: &'a str,
+    ) -> Vec<Cow<'a, str>> {
+        let mut args = vec![Cow::Borrowed("-D"), Cow::Borrowed(datadir_path_str)];
+
+        let mut overrides = self.neon_local_overrides();
+        overrides.extend(config_overrides.iter().map(|&c| c.to_owned()));
+        for config_override in overrides {
+            args.push(Cow::Borrowed("-c"));
+            args.push(Cow::Owned(config_override));
+        }
+
+        args
+    }
+
+    fn pageserver_env_variables(&self) -> anyhow::Result<Vec<(String, String)>> {
+        // FIXME: why is this tied to pageserver's auth type? Whether or not the safekeeper
+        // needs a token, and how to generate that token, seems independent to whether
+        // the pageserver requires a token in incoming requests.
+        Ok(if self.conf.http_auth_type != AuthType::Trust {
+            // Generate a token to connect from the pageserver to a safekeeper
+            let token = self
+                .env
+                .generate_auth_token(&Claims::new(None, Scope::SafekeeperData))?;
+            vec![("NEON_AUTH_TOKEN".to_owned(), token)]
+        } else {
+            Vec::new()
+        })
+    }
+
+    ///
+    /// Stop the server.
+    ///
+    /// If 'immediate' is true, we use SIGQUIT, killing the process immediately.
+    /// Otherwise we use SIGTERM, triggering a clean shutdown
+    ///
+    /// If the server is not running, returns success
+    ///
+    pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
+        background_process::stop_process(immediate, "pageserver", &self.pid_file())
+    }
+
+    pub fn page_server_psql_client(&self) -> anyhow::Result<postgres::Client> {
+        let mut config = self.pg_connection_config.clone();
+        if self.conf.pg_auth_type == AuthType::NeonJWT {
+            let token = self
+                .env
+                .generate_auth_token(&Claims::new(None, Scope::PageServerApi))?;
+            config = config.set_password(Some(token));
+        }
+        Ok(config.connect_no_tls()?)
+    }
+
+    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> anyhow::Result<RequestBuilder> {
+        let mut builder = self.http_client.request(method, url);
+        if self.conf.http_auth_type == AuthType::NeonJWT {
+            let token = self
+                .env
+                .generate_auth_token(&Claims::new(None, Scope::PageServerApi))?;
+            builder = builder.bearer_auth(token)
+        }
+        Ok(builder)
+    }
+
+    pub fn check_status(&self) -> Result<()> {
+        self.http_request(Method::GET, format!("{}/status", self.http_base_url))?
+            .send()?
+            .error_from_body()?;
+        Ok(())
+    }
+
+    pub fn tenant_list(&self) -> Result<Vec<TenantInfo>> {
+        Ok(self
+            .http_request(Method::GET, format!("{}/tenant", self.http_base_url))?
+            .send()?
+            .error_from_body()?
+            .json()?)
+    }
+
+    pub fn tenant_create(
+        &self,
+        new_tenant_id: TenantId,
+        generation: Option<u32>,
+        settings: HashMap<&str, &str>,
+    ) -> anyhow::Result<TenantId> {
+        let mut settings = settings.clone();
+
+        let config = models::TenantConfig {
+            checkpoint_distance: settings
+                .remove("checkpoint_distance")
+                .map(|x| x.parse::<u64>())
+                .transpose()?,
+            checkpoint_timeout: settings.remove("checkpoint_timeout").map(|x| x.to_string()),
+            compaction_target_size: settings
+                .remove("compaction_target_size")
+                .map(|x| x.parse::<u64>())
+                .transpose()?,
+            compaction_period: settings.remove("compaction_period").map(|x| x.to_string()),
+            compaction_threshold: settings
+                .remove("compaction_threshold")
+                .map(|x| x.parse::<usize>())
+                .transpose()?,
+            gc_horizon: settings
+                .remove("gc_horizon")
+                .map(|x| x.parse::<u64>())
+                .transpose()?,
+            gc_period: settings.remove("gc_period").map(|x| x.to_string()),
+            image_creation_threshold: settings
+                .remove("image_creation_threshold")
+                .map(|x| x.parse::<usize>())
+                .transpose()?,
+            pitr_interval: settings.remove("pitr_interval").map(|x| x.to_string()),
+            walreceiver_connect_timeout: settings
+                .remove("walreceiver_connect_timeout")
+                .map(|x| x.to_string()),
+            lagging_wal_timeout: settings
+                .remove("lagging_wal_timeout")
+                .map(|x| x.to_string()),
+            max_lsn_wal_lag: settings
+                .remove("max_lsn_wal_lag")
+                .map(|x| x.parse::<NonZeroU64>())
+                .transpose()
+                .context("Failed to parse 'max_lsn_wal_lag' as non zero integer")?,
+            trace_read_requests: settings
+                .remove("trace_read_requests")
+                .map(|x| x.parse::<bool>())
+                .transpose()
+                .context("Failed to parse 'trace_read_requests' as bool")?,
+            eviction_policy: settings
+                .remove("eviction_policy")
+                .map(serde_json::from_str)
+                .transpose()
+                .context("Failed to parse 'eviction_policy' json")?,
+            min_resident_size_override: settings
+                .remove("min_resident_size_override")
+                .map(|x| x.parse::<u64>())
+                .transpose()
+                .context("Failed to parse 'min_resident_size_override' as integer")?,
+            evictions_low_residence_duration_metric_threshold: settings
+                .remove("evictions_low_residence_duration_metric_threshold")
+                .map(|x| x.to_string()),
+            gc_feedback: settings
+                .remove("gc_feedback")
+                .map(|x| x.parse::<bool>())
+                .transpose()
+                .context("Failed to parse 'gc_feedback' as bool")?,
+        };
+
+        let request = models::TenantCreateRequest {
+            new_tenant_id,
+            generation,
+            config,
+        };
+        if !settings.is_empty() {
+            bail!("Unrecognized tenant settings: {settings:?}")
+        }
+        self.http_request(Method::POST, format!("{}/tenant", self.http_base_url))?
+            .json(&request)
+            .send()?
+            .error_from_body()?
+            .json::<Option<String>>()
+            .with_context(|| {
+                format!("Failed to parse tenant creation response for tenant id: {new_tenant_id:?}")
+            })?
+            .context("No tenant id was found in the tenant creation response")
+            .and_then(|tenant_id_string| {
+                tenant_id_string.parse().with_context(|| {
+                    format!("Failed to parse response string as tenant id: '{tenant_id_string}'")
+                })
+            })
+    }
+
+    pub fn tenant_config(
+        &self,
+        tenant_id: TenantId,
+        mut settings: HashMap<&str, &str>,
+    ) -> anyhow::Result<()> {
+        let config = {
+            // Braces to make the diff easier to read
+            models::TenantConfig {
+                checkpoint_distance: settings
+                    .remove("checkpoint_distance")
+                    .map(|x| x.parse::<u64>())
+                    .transpose()
+                    .context("Failed to parse 'checkpoint_distance' as an integer")?,
+                checkpoint_timeout: settings.remove("checkpoint_timeout").map(|x| x.to_string()),
+                compaction_target_size: settings
+                    .remove("compaction_target_size")
+                    .map(|x| x.parse::<u64>())
+                    .transpose()
+                    .context("Failed to parse 'compaction_target_size' as an integer")?,
+                compaction_period: settings.remove("compaction_period").map(|x| x.to_string()),
+                compaction_threshold: settings
+                    .remove("compaction_threshold")
+                    .map(|x| x.parse::<usize>())
+                    .transpose()
+                    .context("Failed to parse 'compaction_threshold' as an integer")?,
+                gc_horizon: settings
+                    .remove("gc_horizon")
+                    .map(|x| x.parse::<u64>())
+                    .transpose()
+                    .context("Failed to parse 'gc_horizon' as an integer")?,
+                gc_period: settings.remove("gc_period").map(|x| x.to_string()),
+                image_creation_threshold: settings
+                    .remove("image_creation_threshold")
+                    .map(|x| x.parse::<usize>())
+                    .transpose()
+                    .context("Failed to parse 'image_creation_threshold' as non zero integer")?,
+                pitr_interval: settings.remove("pitr_interval").map(|x| x.to_string()),
+                walreceiver_connect_timeout: settings
+                    .remove("walreceiver_connect_timeout")
+                    .map(|x| x.to_string()),
+                lagging_wal_timeout: settings
+                    .remove("lagging_wal_timeout")
+                    .map(|x| x.to_string()),
+                max_lsn_wal_lag: settings
+                    .remove("max_lsn_wal_lag")
+                    .map(|x| x.parse::<NonZeroU64>())
+                    .transpose()
+                    .context("Failed to parse 'max_lsn_wal_lag' as non zero integer")?,
+                trace_read_requests: settings
+                    .remove("trace_read_requests")
+                    .map(|x| x.parse::<bool>())
+                    .transpose()
+                    .context("Failed to parse 'trace_read_requests' as bool")?,
+                eviction_policy: settings
+                    .remove("eviction_policy")
+                    .map(serde_json::from_str)
+                    .transpose()
+                    .context("Failed to parse 'eviction_policy' json")?,
+                min_resident_size_override: settings
+                    .remove("min_resident_size_override")
+                    .map(|x| x.parse::<u64>())
+                    .transpose()
+                    .context("Failed to parse 'min_resident_size_override' as an integer")?,
+                evictions_low_residence_duration_metric_threshold: settings
+                    .remove("evictions_low_residence_duration_metric_threshold")
+                    .map(|x| x.to_string()),
+                gc_feedback: settings
+                    .remove("gc_feedback")
+                    .map(|x| x.parse::<bool>())
+                    .transpose()
+                    .context("Failed to parse 'gc_feedback' as bool")?,
+            }
+        };
+
+        if !settings.is_empty() {
+            bail!("Unrecognized tenant settings: {settings:?}")
+        }
+
+        self.http_request(Method::PUT, format!("{}/tenant/config", self.http_base_url))?
+            .json(&models::TenantConfigRequest { tenant_id, config })
+            .send()?
+            .error_from_body()?;
+
+        Ok(())
+    }
+
+    pub fn timeline_list(&self, tenant_id: &TenantId) -> anyhow::Result<Vec<TimelineInfo>> {
+        let timeline_infos: Vec<TimelineInfo> = self
+            .http_request(
+                Method::GET,
+                format!("{}/tenant/{}/timeline", self.http_base_url, tenant_id),
+            )?
+            .send()?
+            .error_from_body()?
+            .json()?;
+
+        Ok(timeline_infos)
+    }
+
+    pub fn timeline_create(
+        &self,
+        tenant_id: TenantId,
+        new_timeline_id: Option<TimelineId>,
+        ancestor_start_lsn: Option<Lsn>,
+        ancestor_timeline_id: Option<TimelineId>,
+        pg_version: Option<u32>,
+    ) -> anyhow::Result<TimelineInfo> {
+        // If timeline ID was not specified, generate one
+        let new_timeline_id = new_timeline_id.unwrap_or(TimelineId::generate());
+
+        self.http_request(
+            Method::POST,
+            format!("{}/tenant/{}/timeline", self.http_base_url, tenant_id),
+        )?
+        .json(&models::TimelineCreateRequest {
+            new_timeline_id,
+            ancestor_start_lsn,
+            ancestor_timeline_id,
+            pg_version,
+        })
+        .send()?
+        .error_from_body()?
+        .json::<Option<TimelineInfo>>()
+        .with_context(|| {
+            format!("Failed to parse timeline creation response for tenant id: {tenant_id}")
+        })?
+        .with_context(|| {
+            format!(
+                "No timeline id was found in the timeline creation response for tenant {tenant_id}"
+            )
+        })
+    }
+
+    /// Import a basebackup prepared using either:
+    /// a) `pg_basebackup -F tar`, or
+    /// b) The `fullbackup` pageserver endpoint
+    ///
+    /// # Arguments
+    /// * `tenant_id` - tenant to import into. Created if not exists
+    /// * `timeline_id` - id to assign to imported timeline
+    /// * `base` - (start lsn of basebackup, path to `base.tar` file)
+    /// * `pg_wal` - if there's any wal to import: (end lsn, path to `pg_wal.tar`)
+    pub fn timeline_import(
+        &self,
+        tenant_id: TenantId,
+        timeline_id: TimelineId,
+        base: (Lsn, PathBuf),
+        pg_wal: Option<(Lsn, PathBuf)>,
+        pg_version: u32,
+    ) -> anyhow::Result<()> {
+        let mut client = self.page_server_psql_client()?;
+
+        // Init base reader
+        let (start_lsn, base_tarfile_path) = base;
+        let base_tarfile = File::open(base_tarfile_path)?;
+        let mut base_reader = BufReader::new(base_tarfile);
+
+        // Init wal reader if necessary
+        let (end_lsn, wal_reader) = if let Some((end_lsn, wal_tarfile_path)) = pg_wal {
+            let wal_tarfile = File::open(wal_tarfile_path)?;
+            let wal_reader = BufReader::new(wal_tarfile);
+            (end_lsn, Some(wal_reader))
+        } else {
+            (start_lsn, None)
+        };
+
+        // Import base
+        let import_cmd = format!(
+            "import basebackup {tenant_id} {timeline_id} {start_lsn} {end_lsn} {pg_version}"
+        );
+        let mut writer = client.copy_in(&import_cmd)?;
+        io::copy(&mut base_reader, &mut writer)?;
+        writer.finish()?;
+
+        // Import wal if necessary
+        if let Some(mut wal_reader) = wal_reader {
+            let import_cmd = format!("import wal {tenant_id} {timeline_id} {start_lsn} {end_lsn}");
+            let mut writer = client.copy_in(&import_cmd)?;
+            io::copy(&mut wal_reader, &mut writer)?;
+            writer.finish()?;
+        }
+
+        Ok(())
+    }
+}

control_plane/src/postgresql_conf.rs

@@ -0,0 +1,226 @@
+///
+/// Module for parsing postgresql.conf file.
+///
+/// NOTE: This doesn't implement the full, correct postgresql.conf syntax. Just
+/// enough to extract a few settings we need in Neon, assuming you don't do
+/// funny stuff like include-directives or funny escaping.
+use anyhow::{bail, Context, Result};
+use once_cell::sync::Lazy;
+use regex::Regex;
+use std::collections::HashMap;
+use std::fmt;
+use std::io::BufRead;
+use std::str::FromStr;
+
+/// In-memory representation of a postgresql.conf file
+#[derive(Default, Debug)]
+pub struct PostgresConf {
+    lines: Vec<String>,
+    hash: HashMap<String, String>,
+}
+
+static CONF_LINE_RE: Lazy<Regex> = Lazy::new(|| Regex::new(r"^((?:\w|\.)+)\s*=\s*(\S+)$").unwrap());
+
+impl PostgresConf {
+    pub fn new() -> PostgresConf {
+        PostgresConf::default()
+    }
+
+    /// Read file into memory
+    pub fn read(read: impl std::io::Read) -> Result<PostgresConf> {
+        let mut result = Self::new();
+
+        for line in std::io::BufReader::new(read).lines() {
+            let line = line?;
+
+            // Store each line in a vector, in original format
+            result.lines.push(line.clone());
+
+            // Also parse each line and insert key=value lines into a hash map.
+            //
+            // FIXME: This doesn't match exactly the flex/bison grammar in PostgreSQL.
+            // But it's close enough for our usage.
+            let line = line.trim();
+            if line.starts_with('#') {
+                // comment, ignore
+                continue;
+            } else if let Some(caps) = CONF_LINE_RE.captures(line) {
+                let name = caps.get(1).unwrap().as_str();
+                let raw_val = caps.get(2).unwrap().as_str();
+
+                if let Ok(val) = deescape_str(raw_val) {
+                    // Note: if there's already an entry in the hash map for
+                    // this key, this will replace it. That's the behavior what
+                    // we want; when PostgreSQL reads the file, each line
+                    // overrides any previous value for the same setting.
+                    result.hash.insert(name.to_string(), val.to_string());
+                }
+            }
+        }
+        Ok(result)
+    }
+
+    /// Return the current value of 'option'
+    pub fn get(&self, option: &str) -> Option<&str> {
+        self.hash.get(option).map(|x| x.as_ref())
+    }
+
+    /// Return the current value of a field, parsed to the right datatype.
+    ///
+    /// This calls the FromStr::parse() function on the value of the field. If
+    /// the field does not exist, or parsing fails, returns an error.
+    ///
+    pub fn parse_field<T>(&self, field_name: &str, context: &str) -> Result<T>
+    where
+        T: FromStr,
+        <T as FromStr>::Err: std::error::Error + Send + Sync + 'static,
+    {
+        self.get(field_name)
+            .with_context(|| format!("could not find '{}' option {}", field_name, context))?
+            .parse::<T>()
+            .with_context(|| format!("could not parse '{}' option {}", field_name, context))
+    }
+
+    pub fn parse_field_optional<T>(&self, field_name: &str, context: &str) -> Result<Option<T>>
+    where
+        T: FromStr,
+        <T as FromStr>::Err: std::error::Error + Send + Sync + 'static,
+    {
+        if let Some(val) = self.get(field_name) {
+            let result = val
+                .parse::<T>()
+                .with_context(|| format!("could not parse '{}' option {}", field_name, context))?;
+
+            Ok(Some(result))
+        } else {
+            Ok(None)
+        }
+    }
+
+    ///
+    /// Note: if you call this multiple times for the same option, the config
+    /// file will a line for each call. It would be nice to have a function
+    /// to change an existing line, but that's a TODO.
+    ///
+    pub fn append(&mut self, option: &str, value: &str) {
+        self.lines
+            .push(format!("{}={}\n", option, escape_str(value)));
+        self.hash.insert(option.to_string(), value.to_string());
+    }
+
+    /// Append an arbitrary non-setting line to the config file
+    pub fn append_line(&mut self, line: &str) {
+        self.lines.push(line.to_string());
+    }
+}
+
+impl fmt::Display for PostgresConf {
+    /// Return the whole configuration file as a string
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        for line in self.lines.iter() {
+            f.write_str(line)?;
+        }
+        Ok(())
+    }
+}
+
+/// Escape a value for putting in postgresql.conf.
+fn escape_str(s: &str) -> String {
+    // If the string doesn't contain anything that needs quoting or escaping, return it
+    // as it is.
+    //
+    // The first part of the regex, before the '|', matches the INTEGER rule in the
+    // PostgreSQL flex grammar (guc-file.l). It matches plain integers like "123" and
+    // "-123", and also accepts units like "10MB". The second part of the regex matches
+    // the UNQUOTED_STRING rule, and accepts strings that contain a single word, beginning
+    // with a letter. That covers words like "off" or "posix". Everything else is quoted.
+    //
+    // This regex is a bit more conservative than the rules in guc-file.l, so we quote some
+    // strings that PostgreSQL would accept without quoting, but that's OK.
+
+    static UNQUOTED_RE: Lazy<Regex> =
+        Lazy::new(|| Regex::new(r"(^[-+]?[0-9]+[a-zA-Z]*$)|(^[a-zA-Z][a-zA-Z0-9]*$)").unwrap());
+
+    if UNQUOTED_RE.is_match(s) {
+        s.to_string()
+    } else {
+        // Otherwise escape and quote it
+        let s = s
+            .replace('\\', "\\\\")
+            .replace('\n', "\\n")
+            .replace('\'', "''");
+
+        "\'".to_owned() + &s + "\'"
+    }
+}
+
+/// De-escape a possibly-quoted value.
+///
+/// See `DeescapeQuotedString` function in PostgreSQL sources for how PostgreSQL
+/// does this.
+fn deescape_str(s: &str) -> Result<String> {
+    // If the string has a quote at the beginning and end, strip them out.
+    if s.len() >= 2 && s.starts_with('\'') && s.ends_with('\'') {
+        let mut result = String::new();
+
+        let mut iter = s[1..(s.len() - 1)].chars().peekable();
+        while let Some(c) = iter.next() {
+            let newc = if c == '\\' {
+                match iter.next() {
+                    Some('b') => '\x08',
+                    Some('f') => '\x0c',
+                    Some('n') => '\n',
+                    Some('r') => '\r',
+                    Some('t') => '\t',
+                    Some('0'..='7') => {
+                        // TODO
+                        bail!("octal escapes not supported");
+                    }
+                    Some(n) => n,
+                    None => break,
+                }
+            } else if c == '\'' && iter.peek() == Some(&'\'') {
+                // doubled quote becomes just one quote
+                iter.next().unwrap()
+            } else {
+                c
+            };
+
+            result.push(newc);
+        }
+        Ok(result)
+    } else {
+        Ok(s.to_string())
+    }
+}
+
+#[test]
+fn test_postgresql_conf_escapes() -> Result<()> {
+    assert_eq!(escape_str("foo bar"), "'foo bar'");
+    // these don't need to be quoted
+    assert_eq!(escape_str("foo"), "foo");
+    assert_eq!(escape_str("123"), "123");
+    assert_eq!(escape_str("+123"), "+123");
+    assert_eq!(escape_str("-10"), "-10");
+    assert_eq!(escape_str("1foo"), "1foo");
+    assert_eq!(escape_str("foo1"), "foo1");
+    assert_eq!(escape_str("10MB"), "10MB");
+    assert_eq!(escape_str("-10kB"), "-10kB");
+
+    // these need quoting and/or escaping
+    assert_eq!(escape_str("foo bar"), "'foo bar'");
+    assert_eq!(escape_str("fo'o"), "'fo''o'");
+    assert_eq!(escape_str("fo\no"), "'fo\\no'");
+    assert_eq!(escape_str("fo\\o"), "'fo\\\\o'");
+    assert_eq!(escape_str("10 cats"), "'10 cats'");
+
+    // Test de-escaping
+    assert_eq!(deescape_str(&escape_str("foo"))?, "foo");
+    assert_eq!(deescape_str(&escape_str("fo'o\nba\\r"))?, "fo'o\nba\\r");
+    assert_eq!(deescape_str("'\\b\\f\\n\\r\\t'")?, "\x08\x0c\n\r\t");
+
+    // octal-escapes are currently not supported
+    assert!(deescape_str("'foo\\7\\07\\007'").is_err());
+
+    Ok(())
+}

control_plane/src/safekeeper.rs

@@ -0,0 +1,233 @@
+//! Code to manage safekeepers
+//!
+//! In the local test environment, the data for each safekeeper is stored in
+//!
+//! ```text
+//!   .neon/safekeepers/<safekeeper id>
+//! ```
+use std::io::Write;
+use std::path::PathBuf;
+use std::process::Child;
+use std::{io, result};
+
+use anyhow::Context;
+use camino::Utf8PathBuf;
+use postgres_connection::PgConnectionConfig;
+use reqwest::blocking::{Client, RequestBuilder, Response};
+use reqwest::{IntoUrl, Method};
+use thiserror::Error;
+use utils::{http::error::HttpErrorBody, id::NodeId};
+
+use crate::{
+    background_process,
+    local_env::{LocalEnv, SafekeeperConf},
+};
+
+#[derive(Error, Debug)]
+pub enum SafekeeperHttpError {
+    #[error("Reqwest error: {0}")]
+    Transport(#[from] reqwest::Error),
+
+    #[error("Error: {0}")]
+    Response(String),
+}
+
+type Result<T> = result::Result<T, SafekeeperHttpError>;
+
+pub trait ResponseErrorMessageExt: Sized {
+    fn error_from_body(self) -> Result<Self>;
+}
+
+impl ResponseErrorMessageExt for Response {
+    fn error_from_body(self) -> Result<Self> {
+        let status = self.status();
+        if !(status.is_client_error() || status.is_server_error()) {
+            return Ok(self);
+        }
+
+        // reqwest does not export its error construction utility functions, so let's craft the message ourselves
+        let url = self.url().to_owned();
+        Err(SafekeeperHttpError::Response(
+            match self.json::<HttpErrorBody>() {
+                Ok(err_body) => format!("Error: {}", err_body.msg),
+                Err(_) => format!("Http error ({}) at {}.", status.as_u16(), url),
+            },
+        ))
+    }
+}
+
+//
+// Control routines for safekeeper.
+//
+// Used in CLI and tests.
+//
+#[derive(Debug)]
+pub struct SafekeeperNode {
+    pub id: NodeId,
+
+    pub conf: SafekeeperConf,
+
+    pub pg_connection_config: PgConnectionConfig,
+    pub env: LocalEnv,
+    pub http_client: Client,
+    pub http_base_url: String,
+}
+
+impl SafekeeperNode {
+    pub fn from_env(env: &LocalEnv, conf: &SafekeeperConf) -> SafekeeperNode {
+        SafekeeperNode {
+            id: conf.id,
+            conf: conf.clone(),
+            pg_connection_config: Self::safekeeper_connection_config(conf.pg_port),
+            env: env.clone(),
+            http_client: Client::new(),
+            http_base_url: format!("http://127.0.0.1:{}/v1", conf.http_port),
+        }
+    }
+
+    /// Construct libpq connection string for connecting to this safekeeper.
+    fn safekeeper_connection_config(port: u16) -> PgConnectionConfig {
+        PgConnectionConfig::new_host_port(url::Host::parse("127.0.0.1").unwrap(), port)
+    }
+
+    pub fn datadir_path_by_id(env: &LocalEnv, sk_id: NodeId) -> PathBuf {
+        env.safekeeper_data_dir(&format!("sk{sk_id}"))
+    }
+
+    pub fn datadir_path(&self) -> PathBuf {
+        SafekeeperNode::datadir_path_by_id(&self.env, self.id)
+    }
+
+    pub fn pid_file(&self) -> Utf8PathBuf {
+        Utf8PathBuf::from_path_buf(self.datadir_path().join("safekeeper.pid"))
+            .expect("non-Unicode path")
+    }
+
+    pub fn start(&self, extra_opts: Vec<String>) -> anyhow::Result<Child> {
+        print!(
+            "Starting safekeeper at '{}' in '{}'",
+            self.pg_connection_config.raw_address(),
+            self.datadir_path().display()
+        );
+        io::stdout().flush().unwrap();
+
+        let listen_pg = format!("127.0.0.1:{}", self.conf.pg_port);
+        let listen_http = format!("127.0.0.1:{}", self.conf.http_port);
+        let id = self.id;
+        let datadir = self.datadir_path();
+
+        let id_string = id.to_string();
+        // TODO: add availability_zone to the config.
+        // Right now we just specify any value here and use it to check metrics in tests.
+        let availability_zone = format!("sk-{}", id_string);
+
+        let mut args = vec![
+            "-D".to_owned(),
+            datadir
+                .to_str()
+                .with_context(|| {
+                    format!("Datadir path {datadir:?} cannot be represented as a unicode string")
+                })?
+                .to_owned(),
+            "--id".to_owned(),
+            id_string,
+            "--listen-pg".to_owned(),
+            listen_pg,
+            "--listen-http".to_owned(),
+            listen_http,
+            "--availability-zone".to_owned(),
+            availability_zone,
+        ];
+        if let Some(pg_tenant_only_port) = self.conf.pg_tenant_only_port {
+            let listen_pg_tenant_only = format!("127.0.0.1:{}", pg_tenant_only_port);
+            args.extend(["--listen-pg-tenant-only".to_owned(), listen_pg_tenant_only]);
+        }
+        if !self.conf.sync {
+            args.push("--no-sync".to_owned());
+        }
+
+        let broker_endpoint = format!("{}", self.env.broker.client_url());
+        args.extend(["--broker-endpoint".to_owned(), broker_endpoint]);
+
+        let mut backup_threads = String::new();
+        if let Some(threads) = self.conf.backup_threads {
+            backup_threads = threads.to_string();
+            args.extend(["--backup-threads".to_owned(), backup_threads]);
+        } else {
+            drop(backup_threads);
+        }
+
+        if let Some(ref remote_storage) = self.conf.remote_storage {
+            args.extend(["--remote-storage".to_owned(), remote_storage.clone()]);
+        }
+
+        let key_path = self.env.base_data_dir.join("auth_public_key.pem");
+        if self.conf.auth_enabled {
+            let key_path_string = key_path
+                .to_str()
+                .with_context(|| {
+                    format!("Key path {key_path:?} cannot be represented as a unicode string")
+                })?
+                .to_owned();
+            args.extend([
+                "--pg-auth-public-key-path".to_owned(),
+                key_path_string.clone(),
+            ]);
+            args.extend([
+                "--pg-tenant-only-auth-public-key-path".to_owned(),
+                key_path_string.clone(),
+            ]);
+            args.extend([
+                "--http-auth-public-key-path".to_owned(),
+                key_path_string.clone(),
+            ]);
+        }
+
+        args.extend(extra_opts);
+
+        background_process::start_process(
+            &format!("safekeeper-{id}"),
+            &datadir,
+            &self.env.safekeeper_bin(),
+            &args,
+            [],
+            background_process::InitialPidFile::Expect(&self.pid_file()),
+            || match self.check_status() {
+                Ok(()) => Ok(true),
+                Err(SafekeeperHttpError::Transport(_)) => Ok(false),
+                Err(e) => Err(anyhow::anyhow!("Failed to check node status: {e}")),
+            },
+        )
+    }
+
+    ///
+    /// Stop the server.
+    ///
+    /// If 'immediate' is true, we use SIGQUIT, killing the process immediately.
+    /// Otherwise we use SIGTERM, triggering a clean shutdown
+    ///
+    /// If the server is not running, returns success
+    ///
+    pub fn stop(&self, immediate: bool) -> anyhow::Result<()> {
+        background_process::stop_process(
+            immediate,
+            &format!("safekeeper {}", self.id),
+            &self.pid_file(),
+        )
+    }
+
+    fn http_request<U: IntoUrl>(&self, method: Method, url: U) -> RequestBuilder {
+        // TODO: authentication
+        //if self.env.auth_type == AuthType::NeonJWT {
+        //    builder = builder.bearer_auth(&self.env.safekeeper_auth_token)
+        //}
+        self.http_client.request(method, url)
+    }
+
+    pub fn check_status(&self) -> Result<()> {
+        self.http_request(Method::GET, format!("{}/{}", self.http_base_url, "status"))
+            .send()?
+            .error_from_body()?;
+        Ok(())
+    }
+}

control_plane/src/storage.rs

@@ -1,413 +0,0 @@
-use anyhow::Result;
-use std::fs;
-use std::io;
-use std::net::SocketAddr;
-use std::net::TcpStream;
-use std::path::{Path, PathBuf};
-use std::process::Command;
-use std::str::FromStr;
-use std::sync::atomic::{AtomicBool, Ordering};
-use std::sync::Arc;
-use std::thread;
-use std::time::Duration;
-
-use postgres::{Client, NoTls};
-
-use crate::compute::PostgresNode;
-use crate::local_env::LocalEnv;
-use pageserver::ZTimelineId;
-
-//
-// Collection of several example deployments useful for tests.
-//
-// I'm intendedly modelling storage and compute control planes as a separate entities
-// as it is closer to the actual setup.
-//
-pub struct TestStorageControlPlane {
-    pub wal_acceptors: Vec<WalAcceptorNode>,
-    pub pageserver: Arc<PageServerNode>,
-    pub test_done: AtomicBool,
-    pub repopath: PathBuf,
-}
-
-impl TestStorageControlPlane {
-    // Peek into the repository, to grab the timeline ID of given branch
-    pub fn get_branch_timeline(&self, branchname: &str) -> ZTimelineId {
-        let branchpath = self.repopath.join("refs/branches/".to_owned() + branchname);
-
-        ZTimelineId::from_str(&(fs::read_to_string(&branchpath).unwrap())).unwrap()
-    }
-
-    // postgres <-> page_server
-    //
-    // Initialize a new repository and configure a page server to run in it
-    //
-    pub fn one_page_server(local_env: &LocalEnv) -> TestStorageControlPlane {
-        let repopath = local_env.repo_path.clone();
-
-        let pserver = Arc::new(PageServerNode {
-            env: local_env.clone(),
-            kill_on_exit: true,
-            listen_address: None,
-        });
-        pserver.start().unwrap();
-
-        TestStorageControlPlane {
-            wal_acceptors: Vec::new(),
-            pageserver: pserver,
-            test_done: AtomicBool::new(false),
-            repopath: repopath,
-        }
-    }
-
-    pub fn one_page_server_no_start(local_env: &LocalEnv) -> TestStorageControlPlane {
-        let repopath = local_env.repo_path.clone();
-
-        let pserver = Arc::new(PageServerNode {
-            env: local_env.clone(),
-            kill_on_exit: true,
-            listen_address: None,
-        });
-
-        TestStorageControlPlane {
-            wal_acceptors: Vec::new(),
-            pageserver: pserver,
-            test_done: AtomicBool::new(false),
-            repopath: repopath,
-        }
-    }
-
-    // postgres <-> {wal_acceptor1, wal_acceptor2, ...}
-    pub fn fault_tolerant(local_env: &LocalEnv, redundancy: usize) -> TestStorageControlPlane {
-        let repopath = local_env.repo_path.clone();
-
-        let mut cplane = TestStorageControlPlane {
-            wal_acceptors: Vec::new(),
-            pageserver: Arc::new(PageServerNode {
-                env: local_env.clone(),
-                kill_on_exit: true,
-                listen_address: None,
-            }),
-            test_done: AtomicBool::new(false),
-            repopath: repopath,
-        };
-        cplane.pageserver.start().unwrap();
-
-        const WAL_ACCEPTOR_PORT: usize = 54321;
-
-        for i in 0..redundancy {
-            let wal_acceptor = WalAcceptorNode {
-                listen: format!("127.0.0.1:{}", WAL_ACCEPTOR_PORT + i)
-                    .parse()
-                    .unwrap(),
-                data_dir: local_env.repo_path.join(format!("wal_acceptor_{}", i)),
-                env: local_env.clone(),
-            };
-            wal_acceptor.init();
-            wal_acceptor.start();
-            cplane.wal_acceptors.push(wal_acceptor);
-        }
-        cplane
-    }
-
-    pub fn stop(&self) {
-        self.test_done.store(true, Ordering::Relaxed);
-    }
-
-    pub fn get_wal_acceptor_conn_info(&self) -> String {
-        self.wal_acceptors
-            .iter()
-            .map(|wa| wa.listen.to_string())
-            .collect::<Vec<String>>()
-            .join(",")
-    }
-
-    pub fn is_running(&self) -> bool {
-        self.test_done.load(Ordering::Relaxed)
-    }
-}
-
-impl Drop for TestStorageControlPlane {
-    fn drop(&mut self) {
-        self.stop();
-    }
-}
-
-//
-// Control routines for pageserver.
-//
-// Used in CLI and tests.
-//
-pub struct PageServerNode {
-    kill_on_exit: bool,
-    listen_address: Option<SocketAddr>,
-    pub env: LocalEnv,
-}
-
-impl PageServerNode {
-    pub fn from_env(env: &LocalEnv) -> PageServerNode {
-        PageServerNode {
-            kill_on_exit: false,
-            listen_address: None, // default
-            env: env.clone(),
-        }
-    }
-
-    pub fn address(&self) -> SocketAddr {
-        match self.listen_address {
-            Some(addr) => addr,
-            None => "127.0.0.1:64000".parse().unwrap(),
-        }
-    }
-
-    pub fn repo_path(&self) -> PathBuf {
-        self.env.repo_path.clone()
-    }
-
-    pub fn pid_file(&self) -> PathBuf {
-        self.env.repo_path.join("pageserver.pid")
-    }
-
-    pub fn start(&self) -> Result<()> {
-        println!(
-            "Starting pageserver at '{}' in {}",
-            self.address(),
-            self.repo_path().display()
-        );
-
-        let mut cmd = Command::new(self.env.zenith_distrib_dir.join("pageserver"));
-        cmd.args(&["-l", self.address().to_string().as_str()])
-            .arg("-d")
-            .env_clear()
-            .env("RUST_BACKTRACE", "1")
-            .env("ZENITH_REPO_DIR", self.repo_path())
-            .env("PATH", self.env.pg_bin_dir().to_str().unwrap()) // needs postres-wal-redo binary
-            .env("LD_LIBRARY_PATH", self.env.pg_lib_dir().to_str().unwrap());
-
-        if !cmd.status()?.success() {
-            anyhow::bail!(
-                "Pageserver failed to start. See '{}' for details.",
-                self.repo_path().join("pageserver.log").display()
-            );
-        }
-
-        // It takes a while for the page server to start up. Wait until it is
-        // open for business.
-        for retries in 1..15 {
-            let client = self.page_server_psql_client();
-            if client.is_ok() {
-                break;
-            } else {
-                println!("page server not responding yet, retrying ({})...", retries);
-                thread::sleep(Duration::from_secs(1));
-            }
-        }
-        Ok(())
-    }
-
-    pub fn stop(&self) -> Result<()> {
-        let pidfile = self.pid_file();
-        let pid = read_pidfile(&pidfile)?;
-
-        let status = Command::new("kill")
-            .arg(&pid)
-            .env_clear()
-            .status()
-            .expect("failed to execute kill");
-
-        if !status.success() {
-            anyhow::bail!("Failed to kill pageserver with pid {}", pid);
-        }
-
-        // await for pageserver stop
-        for _ in 0..5 {
-            let stream = TcpStream::connect(self.address());
-            if let Err(_e) = stream {
-                return Ok(());
-            }
-            println!("Stopping pageserver on {}", self.address());
-            thread::sleep(Duration::from_secs(1));
-        }
-
-        // ok, we failed to stop pageserver, let's panic
-        if !status.success() {
-            anyhow::bail!("Failed to stop pageserver with pid {}", pid);
-        } else {
-            return Ok(());
-        }
-    }
-
-    pub fn page_server_psql(&self, sql: &str) -> Vec<postgres::SimpleQueryMessage> {
-        let connstring = format!(
-            "host={} port={} dbname={} user={}",
-            self.address().ip(),
-            self.address().port(),
-            "no_db",
-            "no_user",
-        );
-        let mut client = Client::connect(connstring.as_str(), NoTls).unwrap();
-
-        println!("Pageserver query: '{}'", sql);
-        client.simple_query(sql).unwrap()
-    }
-
-    pub fn page_server_psql_client(
-        &self,
-    ) -> std::result::Result<postgres::Client, postgres::Error> {
-        let connstring = format!(
-            "host={} port={} dbname={} user={}",
-            self.address().ip(),
-            self.address().port(),
-            "no_db",
-            "no_user",
-        );
-        Client::connect(connstring.as_str(), NoTls)
-    }
-}
-
-impl Drop for PageServerNode {
-    fn drop(&mut self) {
-        if self.kill_on_exit {
-            let _ = self.stop();
-        }
-    }
-}
-
-//
-// Control routines for WalAcceptor.
-//
-// Now used only in test setups.
-//
-pub struct WalAcceptorNode {
-    listen: SocketAddr,
-    data_dir: PathBuf,
-    env: LocalEnv,
-}
-
-impl WalAcceptorNode {
-    pub fn init(&self) {
-        if self.data_dir.exists() {
-            fs::remove_dir_all(self.data_dir.clone()).unwrap();
-        }
-        fs::create_dir_all(self.data_dir.clone()).unwrap();
-    }
-
-    pub fn start(&self) {
-        println!(
-            "Starting wal_acceptor in {} listening '{}'",
-            self.data_dir.to_str().unwrap(),
-            self.listen
-        );
-
-        let status = Command::new(self.env.zenith_distrib_dir.join("wal_acceptor"))
-            .args(&["-D", self.data_dir.to_str().unwrap()])
-            .args(&["-l", self.listen.to_string().as_str()])
-            .args(&["--systemid", &self.env.systemid.to_string()])
-            // Tell page server it can receive WAL from this WAL safekeeper
-            // FIXME: If there are multiple safekeepers, they will all inform
-            // the page server. Only the last "notification" will stay in effect.
-            // So it's pretty random which safekeeper the page server will connect to
-            .args(&["--pageserver", "127.0.0.1:64000"])
-            .arg("-d")
-            .arg("-n")
-            .status()
-            .expect("failed to start wal_acceptor");
-
-        if !status.success() {
-            panic!("wal_acceptor start failed");
-        }
-    }
-
-    pub fn stop(&self) -> std::result::Result<(), io::Error> {
-        println!("Stopping wal acceptor on {}", self.listen);
-        let pidfile = self.data_dir.join("wal_acceptor.pid");
-        let pid = read_pidfile(&pidfile)?;
-        // Ignores any failures when running this command
-        let _status = Command::new("kill")
-            .arg(pid)
-            .env_clear()
-            .status()
-            .expect("failed to execute kill");
-
-        Ok(())
-    }
-}
-
-impl Drop for WalAcceptorNode {
-    fn drop(&mut self) {
-        self.stop().unwrap();
-    }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-
-pub struct WalProposerNode {
-    pub pid: u32,
-}
-
-impl WalProposerNode {
-    pub fn stop(&self) {
-        let status = Command::new("kill")
-            .arg(self.pid.to_string())
-            .env_clear()
-            .status()
-            .expect("failed to execute kill");
-
-        if !status.success() {
-            panic!("kill start failed");
-        }
-    }
-}
-
-impl Drop for WalProposerNode {
-    fn drop(&mut self) {
-        self.stop();
-    }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-
-pub fn regress_check(pg: &PostgresNode) {
-    pg.safe_psql("postgres", "CREATE DATABASE regression");
-
-    let regress_run_path = Path::new(env!("CARGO_MANIFEST_DIR")).join("tmp_check/regress");
-    fs::create_dir_all(regress_run_path.clone()).unwrap();
-    std::env::set_current_dir(regress_run_path).unwrap();
-
-    let regress_build_path =
-        Path::new(env!("CARGO_MANIFEST_DIR")).join("../tmp_install/build/src/test/regress");
-    let regress_src_path =
-        Path::new(env!("CARGO_MANIFEST_DIR")).join("../vendor/postgres/src/test/regress");
-
-    let _regress_check = Command::new(regress_build_path.join("pg_regress"))
-        .args(&[
-            "--bindir=''",
-            "--use-existing",
-            format!("--bindir={}", pg.env.pg_bin_dir().to_str().unwrap()).as_str(),
-            format!("--dlpath={}", regress_build_path.to_str().unwrap()).as_str(),
-            format!(
-                "--schedule={}",
-                regress_src_path.join("parallel_schedule").to_str().unwrap()
-            )
-            .as_str(),
-            format!("--inputdir={}", regress_src_path.to_str().unwrap()).as_str(),
-        ])
-        .env_clear()
-        .env("LD_LIBRARY_PATH", pg.env.pg_lib_dir().to_str().unwrap())
-        .env("PGHOST", pg.address.ip().to_string())
-        .env("PGPORT", pg.address.port().to_string())
-        .env("PGUSER", pg.whoami())
-        .status()
-        .expect("pg_regress failed");
-}
-
-/// Read a PID file
-///
-/// This should contain an unsigned integer, but we return it as a String
-/// because our callers only want to pass it back into a subcommand.
-fn read_pidfile(pidfile: &Path) -> std::result::Result<String, io::Error> {
-    fs::read_to_string(pidfile).map_err(|err| {
-        eprintln!("failed to read pidfile {:?}: {:?}", pidfile, err);
-        err
-    })
-}

deny.toml

@@ -0,0 +1,95 @@
+# This file was auto-generated using `cargo deny init`.
+# cargo-deny is a cargo plugin that lets you lint your project's
+# dependency graph to ensure all your dependencies conform
+# to your expectations and requirements.
+
+# Root options
+targets = [
+    { triple = "x86_64-unknown-linux-gnu" },
+    { triple = "aarch64-unknown-linux-gnu" },
+    { triple = "aarch64-apple-darwin" },
+    { triple = "x86_64-apple-darwin" },
+]
+all-features = false
+no-default-features = false
+feature-depth = 1
+
+# This section is considered when running `cargo deny check advisories`
+# More documentation for the advisories section can be found here:
+# https://embarkstudios.github.io/cargo-deny/checks/advisories/cfg.html
+[advisories]
+db-urls = ["https://github.com/rustsec/advisory-db"]
+vulnerability = "deny"
+unmaintained = "warn"
+yanked = "warn"
+notice = "warn"
+ignore = []
+
+# This section is considered when running `cargo deny check licenses`
+# More documentation for the licenses section can be found here:
+# https://embarkstudios.github.io/cargo-deny/checks/licenses/cfg.html
+[licenses]
+unlicensed = "deny"
+allow = [
+    "Apache-2.0",
+    "Artistic-2.0",
+    "BSD-2-Clause",
+    "BSD-3-Clause",
+    "ISC",
+    "MIT",
+    "MPL-2.0",
+    "OpenSSL",
+    "Unicode-DFS-2016",
+]
+deny = []
+copyleft = "warn"
+allow-osi-fsf-free = "neither"
+default = "deny"
+confidence-threshold = 0.8
+exceptions = [
+    # Zlib license has some restrictions if we decide to change sth
+    { allow = ["Zlib"], name = "const_format_proc_macros", version = "*" },
+    { allow = ["Zlib"], name = "const_format", version = "*" },
+]
+
+[[licenses.clarify]]
+name = "ring"
+version = "*"
+expression = "MIT AND ISC AND OpenSSL"
+license-files = [
+    { path = "LICENSE", hash = 0xbd0eed23 }
+]
+
+[licenses.private]
+ignore = true
+registries = []
+
+# This section is considered when running `cargo deny check bans`.
+# More documentation about the 'bans' section can be found here:
+# https://embarkstudios.github.io/cargo-deny/checks/bans/cfg.html
+[bans]
+multiple-versions = "warn"
+wildcards = "allow"
+highlight = "all"
+workspace-default-features = "allow"
+external-default-features = "allow"
+allow = []
+deny = []
+skip = []
+skip-tree = []
+
+# This section is considered when running `cargo deny check sources`.
+# More documentation about the 'sources' section can be found here:
+# https://embarkstudios.github.io/cargo-deny/checks/sources/cfg.html
+[sources]
+unknown-registry = "warn"
+unknown-git = "warn"
+allow-registry = ["https://github.com/rust-lang/crates.io-index"]
+allow-git = []
+
+[sources.allow-org]
+github = [
+    "neondatabase",
+]
+gitlab = []
+bitbucket = []

docker-compose/compute_wrapper/Dockerfile

@@ -0,0 +1,13 @@
+ARG REPOSITORY=369495373322.dkr.ecr.eu-central-1.amazonaws.com
+ARG COMPUTE_IMAGE=compute-node-v14
+ARG TAG=latest
+
+FROM $REPOSITORY/${COMPUTE_IMAGE}:$TAG
+
+USER root
+RUN apt-get update &&       \
+    apt-get install -y curl \
+                       jq   \
+                       netcat
+
+USER postgres

docker-compose/compute_wrapper/shell/compute.sh

@@ -0,0 +1,56 @@
+#!/bin/bash
+set -eux
+
+# Generate a random tenant or timeline ID
+#
+# Takes a variable name as argument. The result is stored in that variable.
+generate_id() {
+    local -n resvar=$1
+    printf -v resvar '%08x%08x%08x%08x' $SRANDOM $SRANDOM $SRANDOM $SRANDOM
+}
+
+PG_VERSION=${PG_VERSION:-14}
+
+SPEC_FILE_ORG=/var/db/postgres/specs/spec.json
+SPEC_FILE=/tmp/spec.json
+
+echo "Waiting pageserver become ready."
+while ! nc -z pageserver 6400; do
+     sleep 1;
+done
+echo "Page server is ready."
+
+echo "Create a tenant and timeline"
+generate_id tenant_id
+PARAMS=(
+     -sb 
+     -X POST
+     -H "Content-Type: application/json"
+     -d "{\"new_tenant_id\": \"${tenant_id}\"}"
+     http://pageserver:9898/v1/tenant/
+)
+result=$(curl "${PARAMS[@]}")
+echo $result | jq .
+
+generate_id timeline_id
+PARAMS=(
+     -sb 
+     -X POST
+     -H "Content-Type: application/json"
+     -d "{\"new_timeline_id\": \"${timeline_id}\", \"pg_version\": ${PG_VERSION}}"
+     "http://pageserver:9898/v1/tenant/${tenant_id}/timeline/"
+)
+result=$(curl "${PARAMS[@]}")
+echo $result | jq .
+
+echo "Overwrite tenant id and timeline id in spec file"
+sed "s/TENANT_ID/${tenant_id}/" ${SPEC_FILE_ORG} > ${SPEC_FILE}
+sed -i "s/TIMELINE_ID/${timeline_id}/" ${SPEC_FILE}
+
+cat ${SPEC_FILE}
+
+echo "Start compute node"
+/usr/local/bin/compute_ctl --pgdata /var/db/postgres/compute \
+     -C "postgresql://cloud_admin@localhost:55433/postgres"  \
+     -b /usr/local/bin/postgres                              \
+     -S ${SPEC_FILE}

docker-compose/compute_wrapper/var/db/postgres/specs/spec.json

@@ -0,0 +1,136 @@
+{
+    "format_version": 1.0,
+
+    "timestamp": "2022-10-12T18:00:00.000Z",
+    "operation_uuid": "0f657b36-4b0f-4a2d-9c2e-1dcd615e7d8c",
+
+    "cluster": {
+        "cluster_id": "docker_compose",
+        "name": "docker_compose_test",
+        "state": "restarted",
+        "roles": [
+            {
+                "name": "cloud_admin",
+                "encrypted_password": "b093c0d3b281ba6da1eacc608620abd8",
+                "options": null
+            }
+        ],
+        "databases": [
+        ],
+        "settings": [
+            {
+                "name": "fsync",
+                "value": "off",
+                "vartype": "bool"
+            },
+            {
+                "name": "wal_level",
+                "value": "logical",
+                "vartype": "enum"
+            },
+            {
+                "name": "wal_log_hints",
+                "value": "on",
+                "vartype": "bool"
+            },
+            {
+                "name": "log_connections",
+                "value": "on",
+                "vartype": "bool"
+            },
+            {
+                "name": "port",
+                "value": "55433",
+                "vartype": "integer"
+            },
+            {
+                "name": "shared_buffers",
+                "value": "1MB",
+                "vartype": "string"
+            },
+            {
+                "name": "max_connections",
+                "value": "100",
+                "vartype": "integer"
+            },
+            {
+                "name": "listen_addresses",
+                "value": "0.0.0.0",
+                "vartype": "string"
+            },
+            {
+                "name": "max_wal_senders",
+                "value": "10",
+                "vartype": "integer"
+            },
+            {
+                "name": "max_replication_slots",
+                "value": "10",
+                "vartype": "integer"
+            },
+            {
+                "name": "wal_sender_timeout",
+                "value": "5s",
+                "vartype": "string"
+            },
+            {
+                "name": "wal_keep_size",
+                "value": "0",
+                "vartype": "integer"
+            },
+            {
+                "name": "password_encryption",
+                "value": "md5",
+                "vartype": "enum"
+            },
+            {
+                "name": "restart_after_crash",
+                "value": "off",
+                "vartype": "bool"
+            },
+            {
+                "name": "synchronous_standby_names",
+                "value": "walproposer",
+                "vartype": "string"
+            },
+            {
+                "name": "shared_preload_libraries",
+                "value": "neon",
+                "vartype": "string"
+            },
+            {
+                "name": "neon.safekeepers",
+                "value": "safekeeper1:5454,safekeeper2:5454,safekeeper3:5454",
+                "vartype": "string"
+            },
+            {
+                "name": "neon.timeline_id",
+                "value": "TIMELINE_ID",
+                "vartype": "string"
+            },
+            {
+                "name": "neon.tenant_id",
+                "value": "TENANT_ID",
+                "vartype": "string"
+            },
+            {
+                "name": "neon.pageserver_connstring",
+                "value": "host=pageserver port=6400",
+                "vartype": "string"
+            },
+            {
+                "name": "max_replication_write_lag",
+                "value": "500MB",
+                "vartype": "string"
+            },
+            {
+                "name": "max_replication_flush_lag",
+                "value": "10GB",
+                "vartype": "string"
+            }
+        ]
+    },
+
+    "delta_operations": [
+    ]
+}

docker-compose/docker-compose.yml

@@ -0,0 +1,196 @@
+version: '3'
+
+services:
+  minio:
+    restart: always
+    image: quay.io/minio/minio:RELEASE.2022-10-20T00-55-09Z
+    ports:
+      - 9000:9000
+      - 9001:9001
+    environment:
+      - MINIO_ROOT_USER=minio
+      - MINIO_ROOT_PASSWORD=password
+    command: server /data --address :9000 --console-address ":9001"
+
+  minio_create_buckets:
+    image: minio/mc
+    environment:
+      - MINIO_ROOT_USER=minio
+      - MINIO_ROOT_PASSWORD=password
+    entrypoint:
+      - "/bin/sh"
+      - "-c"
+    command:
+      - "until (/usr/bin/mc alias set minio http://minio:9000 $$MINIO_ROOT_USER $$MINIO_ROOT_PASSWORD) do
+             echo 'Waiting to start minio...' && sleep 1;
+         done;
+         /usr/bin/mc mb minio/neon --region=eu-north-1;
+         exit 0;"
+    depends_on:
+      - minio
+
+  pageserver:
+    restart: always
+    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
+    environment:
+      - BROKER_ENDPOINT='http://storage_broker:50051'
+      - AWS_ACCESS_KEY_ID=minio
+      - AWS_SECRET_ACCESS_KEY=password
+      #- RUST_BACKTRACE=1
+    ports:
+       #- 6400:6400  # pg protocol handler
+       - 9898:9898 # http endpoints
+    entrypoint:
+      - "/bin/sh"
+      - "-c"
+    command:
+      - "/usr/local/bin/pageserver -D /data/.neon/
+                                   -c \"broker_endpoint=$$BROKER_ENDPOINT\"
+                                   -c \"listen_pg_addr='0.0.0.0:6400'\"
+                                   -c \"listen_http_addr='0.0.0.0:9898'\"
+                                   -c \"remote_storage={endpoint='http://minio:9000',
+                                                        bucket_name='neon',
+                                                        bucket_region='eu-north-1',
+                                                        prefix_in_bucket='/pageserver/'}\""
+    depends_on:
+      - storage_broker
+      - minio_create_buckets
+
+  safekeeper1:
+    restart: always
+    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
+    environment:
+      - SAFEKEEPER_ADVERTISE_URL=safekeeper1:5454
+      - SAFEKEEPER_ID=1
+      - BROKER_ENDPOINT=http://storage_broker:50051
+      - AWS_ACCESS_KEY_ID=minio
+      - AWS_SECRET_ACCESS_KEY=password
+      #- RUST_BACKTRACE=1
+    ports:
+      #- 5454:5454 # pg protocol handler
+      - 7676:7676 # http endpoints
+    entrypoint:
+      - "/bin/sh"
+      - "-c"
+    command:
+      - "safekeeper --listen-pg=$$SAFEKEEPER_ADVERTISE_URL
+                    --listen-http='0.0.0.0:7676'
+                    --id=$$SAFEKEEPER_ID
+                    --broker-endpoint=$$BROKER_ENDPOINT
+                    -D /data
+                    --remote-storage=\"{endpoint='http://minio:9000',
+                                        bucket_name='neon',
+                                        bucket_region='eu-north-1',
+                                        prefix_in_bucket='/safekeeper/'}\""
+    depends_on:
+      - storage_broker
+      - minio_create_buckets
+
+  safekeeper2:
+    restart: always
+    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
+    environment:
+      - SAFEKEEPER_ADVERTISE_URL=safekeeper2:5454
+      - SAFEKEEPER_ID=2
+      - BROKER_ENDPOINT=http://storage_broker:50051
+      - AWS_ACCESS_KEY_ID=minio
+      - AWS_SECRET_ACCESS_KEY=password
+      #- RUST_BACKTRACE=1
+    ports:
+      #- 5454:5454 # pg protocol handler
+      - 7677:7676 # http endpoints
+    entrypoint:
+      - "/bin/sh"
+      - "-c"
+    command:
+      - "safekeeper --listen-pg=$$SAFEKEEPER_ADVERTISE_URL
+                    --listen-http='0.0.0.0:7676'
+                    --id=$$SAFEKEEPER_ID
+                    --broker-endpoint=$$BROKER_ENDPOINT
+                    -D /data
+                    --remote-storage=\"{endpoint='http://minio:9000',
+                                        bucket_name='neon',
+                                        bucket_region='eu-north-1',
+                                        prefix_in_bucket='/safekeeper/'}\""
+    depends_on:
+      - storage_broker
+      - minio_create_buckets
+
+  safekeeper3:
+    restart: always
+    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
+    environment:
+      - SAFEKEEPER_ADVERTISE_URL=safekeeper3:5454
+      - SAFEKEEPER_ID=3
+      - BROKER_ENDPOINT=http://storage_broker:50051
+      - AWS_ACCESS_KEY_ID=minio
+      - AWS_SECRET_ACCESS_KEY=password
+      #- RUST_BACKTRACE=1
+    ports:
+      #- 5454:5454 # pg protocol handler
+      - 7678:7676 # http endpoints
+    entrypoint:
+      - "/bin/sh"
+      - "-c"
+    command:
+      - "safekeeper --listen-pg=$$SAFEKEEPER_ADVERTISE_URL
+                    --listen-http='0.0.0.0:7676'
+                    --id=$$SAFEKEEPER_ID
+                    --broker-endpoint=$$BROKER_ENDPOINT
+                    -D /data
+                    --remote-storage=\"{endpoint='http://minio:9000',
+                                        bucket_name='neon',
+                                        bucket_region='eu-north-1',
+                                        prefix_in_bucket='/safekeeper/'}\""
+    depends_on:
+      - storage_broker
+      - minio_create_buckets
+
+  storage_broker:
+    restart: always
+    image: ${REPOSITORY:-neondatabase}/neon:${TAG:-latest}
+    ports:
+      - 50051:50051
+    command:
+      - "storage_broker"
+      - "--listen-addr=0.0.0.0:50051"
+
+  compute:
+    restart: always
+    build:
+      context: ./compute_wrapper/
+      args:
+        - REPOSITORY=${REPOSITORY:-neondatabase}
+        - COMPUTE_IMAGE=compute-node-v${PG_VERSION:-14}
+        - TAG=${TAG:-latest}
+        - http_proxy=$http_proxy
+        - https_proxy=$https_proxy
+    environment:
+      - PG_VERSION=${PG_VERSION:-14}
+      #- RUST_BACKTRACE=1
+    # Mount the test files directly, for faster editing cycle.
+    volumes:
+      - ./compute_wrapper/var/db/postgres/specs/:/var/db/postgres/specs/
+      - ./compute_wrapper/shell/:/shell/
+    ports:
+      - 55433:55433 # pg protocol handler
+      - 3080:3080 # http endpoints
+    entrypoint:
+      - "/shell/compute.sh"
+    depends_on:
+      - safekeeper1
+      - safekeeper2
+      - safekeeper3
+      - pageserver
+
+  compute_is_ready:
+    image: postgres:latest
+    entrypoint:
+      - "/bin/bash"
+      - "-c"
+    command:
+      - "until pg_isready -h compute -p 55433 -U cloud_admin ; do
+            echo 'Waiting to start compute...' && sleep 1;
+         done"
+    depends_on:
+      - compute

docker-compose/docker_compose_test.sh

@@ -0,0 +1,60 @@
+#!/bin/bash
+
+# A basic test to ensure Docker images are built correctly.
+# Build a wrapper around the compute, start all services and runs a simple SQL query.
+# Repeats the process for all currenly supported Postgres versions.
+
+# Implicitly accepts `REPOSITORY` and `TAG` env vars that are passed into the compose file
+# Their defaults point at DockerHub `neondatabase/neon:latest` image.`,
+# to verify custom image builds (e.g pre-published ones).
+
+# XXX: Current does not work on M1 macs due to x86_64 Docker images compiled only, and no seccomp support in M1 Docker emulation layer.
+
+set -eux -o pipefail
+
+SCRIPT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
+COMPOSE_FILE=$SCRIPT_DIR/docker-compose.yml
+
+COMPUTE_CONTAINER_NAME=docker-compose-compute-1
+SQL="CREATE TABLE t(key int primary key, value text); insert into t values(1,1); select * from t;"
+PSQL_OPTION="-h localhost -U cloud_admin -p 55433 -c '$SQL' postgres"
+
+cleanup() {
+    echo "show container information"
+    docker ps
+    docker compose -f $COMPOSE_FILE logs
+    echo "stop containers..."
+    docker compose -f $COMPOSE_FILE down
+}
+
+echo "clean up containers if exists"
+cleanup
+
+for pg_version in 14 15 16; do
+    echo "start containers (pg_version=$pg_version)."
+    PG_VERSION=$pg_version docker compose -f $COMPOSE_FILE up --build -d
+
+    echo "wait until the compute is ready. timeout after 60s. "
+    cnt=0
+    while sleep 1; do
+        # check timeout
+        cnt=`expr $cnt + 1`
+        if [ $cnt -gt 60 ]; then
+            echo "timeout before the compute is ready."
+            cleanup
+            exit 1
+        fi
+
+        # check if the compute is ready
+        set +o pipefail
+        result=`docker compose -f $COMPOSE_FILE logs "compute_is_ready" | grep "accepting connections" | wc -l`
+        set -o pipefail
+        if [ $result -eq 1 ]; then
+            echo "OK. The compute is ready to connect."
+            echo "execute simple queries."
+            docker exec $COMPUTE_CONTAINER_NAME /bin/bash -c "psql $PSQL_OPTION"
+            cleanup
+            break
+        fi
+    done
+done

docs/.gitignore

@@ -0,0 +1 @@
+book

docs/SUMMARY.md

@@ -0,0 +1,85 @@
+# Summary
+
+[Introduction]()
+- [Separation of Compute and Storage](./separation-compute-storage.md)
+
+# Architecture
+
+- [Compute]()
+  - [WAL proposer]()
+  - [WAL Backpressure]()
+  - [Postgres changes](./core_changes.md)
+
+- [Pageserver](./pageserver.md)
+    - [Services](./pageserver-services.md)
+    - [Thread management](./pageserver-thread-mgmt.md)
+    - [WAL Redo](./pageserver-walredo.md)
+    - [Page cache](./pageserver-pagecache.md)
+    - [Storage](./pageserver-storage.md)
+        - [Datadir mapping]()
+        - [Layer files]()
+        - [Branching]()
+        - [Garbage collection]()
+    - [Cloud Storage]()
+    - [Processing a GetPage request](./pageserver-processing-getpage.md)
+    - [Processing WAL](./pageserver-processing-wal.md)
+	- [Management API]()
+	- [Tenant Rebalancing]()
+
+- [WAL Service](walservice.md)
+  - [Consensus protocol](safekeeper-protocol.md)
+  - [Management API]()
+  - [Rebalancing]()
+
+- [Control Plane]()
+
+- [Proxy]()
+
+- [Source view](./sourcetree.md)
+  - [docker.md](./docker.md) — Docker images and building pipeline.
+  - [Error handling and logging](./error-handling.md)
+  - [Testing]()
+    - [Unit testing]()
+    - [Integration testing]()
+    - [Benchmarks]()
+
+
+- [Glossary](./glossary.md)
+
+# Uncategorized
+
+- [authentication.md](./authentication.md)
+- [multitenancy.md](./multitenancy.md) — how multitenancy is organized in the pageserver and Zenith CLI.
+- [settings.md](./settings.md)
+#FIXME: move these under sourcetree.md
+#- [postgres_ffi/README.md](/libs/postgres_ffi/README.md)
+#- [test_runner/README.md](/test_runner/README.md)
+
+
+# RFCs
+
+- [RFCs](./rfcs/README.md)
+
+- [002-storage](rfcs/002-storage.md)
+- [003-laptop-cli](rfcs/003-laptop-cli.md)
+- [004-durability](rfcs/004-durability.md)
+- [005-zenith_local](rfcs/005-zenith_local.md)
+- [006-laptop-cli-v2-CLI](rfcs/006-laptop-cli-v2-CLI.md)
+- [006-laptop-cli-v2-repository-structure](rfcs/006-laptop-cli-v2-repository-structure.md)
+- [007-serverless-on-laptop](rfcs/007-serverless-on-laptop.md)
+- [008-push-pull](rfcs/008-push-pull.md)
+- [009-snapshot-first-storage-cli](rfcs/009-snapshot-first-storage-cli.md)
+- [009-snapshot-first-storage](rfcs/009-snapshot-first-storage.md)
+- [009-snapshot-first-storage-pitr](rfcs/009-snapshot-first-storage-pitr.md)
+- [010-storage_details](rfcs/010-storage_details.md)
+- [011-retention-policy](rfcs/011-retention-policy.md)
+- [012-background-tasks](rfcs/012-background-tasks.md)
+- [013-term-history](rfcs/013-term-history.md)
+- [014-safekeepers-gossip](rfcs/014-safekeepers-gossip.md)
+- [014-storage-lsm](rfcs/014-storage-lsm.md)
+- [015-storage-messaging](rfcs/015-storage-messaging.md)
+- [016-connection-routing](rfcs/016-connection-routing.md)
+- [017-timeline-data-management](rfcs/017-timeline-data-management.md)
+- [018-storage-messaging-2](rfcs/018-storage-messaging-2.md)
+- [019-tenant-timeline-lifecycles](rfcs/019-tenant-timeline-lifecycles.md)
+- [cluster-size-limits](rfcs/cluster-size-limits.md)

docs/authentication.md

@@ -0,0 +1,200 @@
+## Authentication
+
+### Overview
+We use JWT tokens in communication between almost all components (compute, pageserver, safekeeper, CLI) regardless of the protocol used (HTTP/PostgreSQL).
+storage_broker currently has no authentication.
+Authentication is optional and is disabled by default for easier debugging.
+It is used in some tests, though.
+Note that we do not cover authentication with `pg.neon.tech` here.
+
+For HTTP connections we use the Bearer authentication scheme.
+For PostgreSQL connections we expect the token to be passed as a password.
+There is a caveat for `psql`: it silently truncates passwords to 100 symbols, so to correctly pass JWT via `psql` you have to either use `PGPASSWORD` environment variable, or store password in `psql`'s config file.
+
+Current token scopes are described in `utils::auth::Scope`.
+There are no expiration or rotation schemes.
+
+_TODO_: some scopes allow both access to server management API and to the data.
+These probably should be split into multiple scopes.
+
+Tokens should not occur in logs.
+They may sometimes occur in configuration files, although this is discouraged
+because configs may be parsed and dumped into logs.
+
+#### Tokens generation and validation
+JWT tokens are signed using a private key.
+Compute/pageserver/safekeeper use the private key's public counterpart to validate JWT tokens.
+These components should not have access to the private key and may only get tokens from their configuration or external clients. 
+
+The key pair is generated once for an installation of compute/pageserver/safekeeper, e.g. by `neon_local init`.
+There is currently no way to rotate the key without bringing down all components.
+
+### Best practices
+
+See [RFC 8725: JSON Web Token Best Current Practices](https://www.rfc-editor.org/rfc/rfc8725)
+
+
+### Token format
+
+The JWT tokens in Neon use "EdDSA" as the algorithm (defined in [RFC8037](https://www.rfc-editor.org/rfc/rfc8037)).
+
+Example:
+
+Header:
+
+```
+{
+  "alg": "EdDSA",
+  "typ": "JWT"
+}
+```
+
+Payload:
+
+```
+{
+  "scope": "tenant",  # "tenant", "pageserverapi", or "safekeeperdata"
+  "tenant_id": "5204921ff44f09de8094a1390a6a50f6",
+}
+```
+
+
+Meanings of scope:
+
+"tenant": Provides access to all data for a specific tenant
+
+"pageserverapi": Provides blanket access to all tenants on the pageserver plus pageserver-wide APIs.
+Should only be used e.g. for status check/tenant creation/list.
+
+"safekeeperdata": Provides blanket access to all data on the safekeeper plus safekeeper-wide APIs.
+Should only be used e.g. for status check.
+Currently also used for connection from any pageserver to any safekeeper.
+
+
+### CLI
+CLI generates a key pair during call to `neon_local init` with the following commands:
+
+```bash
+openssl genpkey -algorithm ed25519 -out auth_private_key.pem
+openssl pkey -in auth_private_key.pem -pubout -out auth_public_key.pem
+```
+
+Configuration files for all components point to `public_key.pem` for JWT validation.
+However, authentication is disabled by default.
+There is no way to automatically enable it everywhere, you have to configure each component individually.
+
+CLI also generates signed token (full access to Pageserver) and saves it in
+the CLI's `config` file under `pageserver.auth_token`.
+Note that pageserver's config does not have any similar parameter.
+CLI is the only component which accesses that token.
+Technically it could generate it from the private key on each run,
+but it does not do that for some reason (_TODO_).
+
+### Compute
+#### Overview
+Compute is a per-timeline PostgreSQL instance, so it should not have
+any access to data of other tenants.
+All tokens used by a compute are restricted to a specific tenant.
+There is no auth isolation from other timelines of the same tenant,
+but a non-rogue client never accesses another timeline even by an accident:
+timeline IDs are random and hard to guess.
+
+#### Incoming connections
+All incoming connections are from PostgreSQL clients.
+Their authentication is just plain PostgreSQL authentication and out of scope for this document.
+
+There is no administrative API except those provided by PostgreSQL.
+
+#### Outgoing connections
+Compute connects to Pageserver for getting pages. The connection string is
+configured by the `neon.pageserver_connstring` PostgreSQL GUC,
+e.g. `postgresql://no_user@localhost:15028`. If the `$NEON_AUTH_TOKEN`
+environment variable is set, it is used as the password for the connection. (The
+pageserver uses JWT tokens for authentication, so the password is really a
+token.)
+
+Compute connects to Safekeepers to write and commit data. The list of safekeeper
+addresses is given in the `neon.safekeepers` GUC. The connections to the
+safekeepers take the password from the `$NEON_AUTH_TOKEN` environment
+variable, if set.
+
+The `compute_ctl` binary that runs before the PostgreSQL server, and launches
+PostgreSQL, also makes a connection to the pageserver. It uses it to fetch the
+initial "base backup" dump, to initialize the PostgreSQL data directory. It also
+uses `$NEON_AUTH_TOKEN` as the password for the connection.
+
+### Pageserver
+#### Overview
+Pageserver keeps track of multiple tenants, each having multiple timelines.
+For each timeline, it connects to the corresponding Safekeeper.
+Information about "corresponding Safekeeper" is published by Safekeepers
+in the storage_broker, but they do not publish access tokens, otherwise what is
+the point of authentication.
+
+Pageserver keeps a connection to some set of Safekeepers, which
+may or may not correspond to active Computes.
+Hence, we cannot obtain a per-timeline access token from a Compute.
+E.g. if the timeline's Compute terminates before all WAL is
+consumed by the Pageserver, the Pageserver continues consuming WAL.
+
+Pageserver replicas' authentication is the same as the main's.
+
+#### Incoming connections
+Pageserver listens for connections from computes.
+Each compute should present a token valid for the timeline's tenant.
+
+Pageserver also has HTTP API: some parts are per-tenant,
+some parts are server-wide, these are different scopes.
+
+Authentication can be enabled separately for the HTTP mgmt API, and
+for the libpq connections from compute. The `http_auth_type` and
+`pg_auth_type` configuration variables in Pageserver's config may
+have one of these values:
+
+* `Trust` removes all authentication.
+* `NeonJWT` enables JWT validation.
+   Tokens are validated using the public key which lies in a PEM file
+   specified in the `auth_validation_public_key_path` config.
+
+#### Outgoing connections
+Pageserver makes a connection to a Safekeeper for each active timeline.
+As Pageserver may want to access any timeline it has on the disk,
+it is given a blanket JWT token to access any data on any Safekeeper.
+This token is passed through an environment variable called `NEON_AUTH_TOKEN`
+(non-configurable as of writing this text).
+
+A better way _may be_ to store JWT token for each timeline next to it,
+but may be not.
+
+### Safekeeper
+#### Overview
+Safekeeper keeps track of multiple tenants, each having multiple timelines.
+
+#### Incoming connections
+Safekeeper accepts connections from Compute/Pageserver, each
+connection corresponds to a specific timeline and requires
+a corresponding JWT token.
+
+Safekeeper also has HTTP API: some parts are per-tenant,
+some parts are server-wide, these are different scopes.
+
+The `auth-validation-public-key-path` command line options controls
+the authentication mode:
+
+* If the option is missing, there is no authentication or JWT token validation.
+* If the option is present, it should be a path to the public key PEM file used for JWT token validation.
+
+#### Outgoing connections
+No connections are initiated by a Safekeeper.
+
+### In the source code
+Tests do not use authentication by default.
+If you need it, you can enable it by configuring the test's environment:
+
+```python
+neon_env_builder.auth_enabled = True
+```
+
+You will have to generate tokens if you want to access components inside the test directly,
+use `AuthKeys.generate_*_token` methods for that.
+If you create a new scope, please create a new method to prevent mistypes in scope's name.

docs/book.toml

@@ -0,0 +1,5 @@
+[book]
+language = "en"
+multilingual = false
+src = "."
+title = "Neon architecture"

docs/consumption_metrics.md

@@ -0,0 +1,115 @@
+### Overview
+Pageserver and proxy periodically collect consumption metrics and push them to a HTTP endpoint.
+
+This doc describes current implementation details.
+For design details see [the RFC](./rfcs/021-metering.md) and [the discussion on Github](https://github.com/neondatabase/neon/pull/2884).
+
+- The metrics are collected in a separate thread, and the collection interval and endpoint are configurable.
+
+- Metrics are cached, so that we don't send unchanged metrics on every iteration.
+
+- Metrics are sent in batches of 1000 (see CHUNK_SIZE const) metrics max with no particular grouping guarantees.
+
+batch format is
+```json
+
+{ "events" : [metric1, metric2, ...]]}
+
+```
+See metric format examples below.
+
+- All metrics values are in bytes, unless otherwise specified.
+
+- Currently no retries are implemented.
+
+### Pageserver metrics
+
+#### Configuration
+The endpoint and the collection interval are specified in the pageserver config file (or can be passed as command line arguments):
+`metric_collection_endpoint` defaults to None, which means that metric collection is disabled by default.
+`metric_collection_interval` defaults to 10min
+
+#### Metrics
+
+Currently, the following metrics are collected:
+
+- `written_size`
+
+Amount of WAL produced , by a timeline, i.e. last_record_lsn
+This is an absolute, per-timeline metric.
+
+- `resident_size`
+
+Size of all the layer files in the tenant's directory on disk on the pageserver.
+This is an absolute, per-tenant metric.
+
+- `remote_storage_size`
+
+Size of the remote storage (S3) directory.
+This is an absolute, per-tenant metric.
+
+- `timeline_logical_size`
+Logical size of the data in the timeline
+This is an absolute, per-timeline metric.
+
+- `synthetic_storage_size`
+Size of all tenant's branches including WAL
+This is the same metric that `tenant/{tenant_id}/size` endpoint returns.
+This is an absolute, per-tenant metric.
+
+Synthetic storage size is calculated in a separate thread, so it might be slightly outdated.
+
+#### Format example
+
+```json
+{
+"metric": "remote_storage_size",
+"type": "absolute",
+"time": "2022-12-28T11:07:19.317310284Z",
+"idempotency_key": "2022-12-28 11:07:19.317310324 UTC-1-4019",
+"value": 12345454,
+"tenant_id": "5d07d9ce9237c4cd845ea7918c0afa7d",
+"timeline_id": "a03ebb4f5922a1c56ff7485cc8854143",
+}
+```
+
+`idempotency_key` is a unique key for each metric, so that we can deduplicate metrics.
+It is a combination of the time, node_id and a random number.
+
+### Proxy consumption metrics
+
+#### Configuration
+The endpoint and the collection interval can be passed as command line arguments for proxy:
+`metric_collection_endpoint` no default, which means that metric collection is disabled by default.
+`metric_collection_interval` no default
+
+#### Metrics
+
+Currently, only one proxy metric is collected:
+
+- `proxy_io_bytes_per_client`
+Outbound traffic per client.
+This is an incremental, per-endpoint metric.
+
+#### Format example
+
+```json
+{
+"metric": "proxy_io_bytes_per_client",
+"type": "incremental",
+"start_time": "2022-12-28T11:07:19.317310284Z",
+"stop_time": "2022-12-28T11:07:19.317310284Z",
+"idempotency_key": "2022-12-28 11:07:19.317310324 UTC-1-4019",
+"value": 12345454,
+"endpoint_id": "5d07d9ce9237c4cd845ea7918c0afa7d",
+}
+```
+
+The metric is incremental, so the value is the difference between the current and the previous value.
+If there is no previous value, the value, the value is the current value and the `start_time` equals `stop_time`.
+
+### TODO
+
+- [ ] Handle errors better: currently if one tenant fails to gather metrics, the whole iteration fails and metrics are not sent for any tenant.
+- [ ] Add retries
+- [ ] Tune the interval

docs/core_changes.md

@@ -0,0 +1,494 @@
+# Postgres core changes
+
+This lists all the changes that have been made to the PostgreSQL
+source tree, as a somewhat logical set of patches. The long-term goal
+is to eliminate all these changes, by submitting patches to upstream
+and refactoring code into extensions, so that you can run unmodified
+PostgreSQL against Neon storage.
+
+In Neon, we run PostgreSQL in the compute nodes, but we also run a special WAL redo process in the
+page server. We currently use the same binary for both, with --wal-redo runtime flag to launch it in
+the WAL redo mode. Some PostgreSQL changes are needed in the compute node, while others are just for
+the WAL redo process.
+
+In addition to core PostgreSQL changes, there is a Neon extension in contrib/neon, to hook into the
+smgr interface. Once all the core changes have been submitted to upstream or eliminated some other
+way, the extension could live outside the postgres repository and build against vanilla PostgreSQL.
+
+Below is a list of all the PostgreSQL source code changes, categorized into changes needed for
+compute, and changes needed for the WAL redo process:
+
+# Changes for Compute node
+
+## Add t_cid to heap WAL records
+
+```
+ src/backend/access/heap/heapam.c                            |   26 +-
+ src/include/access/heapam_xlog.h                            |    6 +-
+```
+
+We have added a new t_cid field to heap WAL records. This changes the WAL record format, making Neon WAL format incompatible with vanilla PostgreSQL!
+
+### Problem we're trying to solve
+
+The problem is that the XLOG_HEAP_INSERT record does not include the command id of the inserted row. And same with deletion/update. So in the primary, a row is inserted with current xmin + cmin. But in the replica, the cmin is always set to 1. That works in PostgreSQL, because the command id is only relevant to the inserting transaction itself. After commit/abort, no one cares about it anymore. But with Neon, we rely on WAL replay to reconstruct the page, even while the original transaction is still running.
+
+### How to get rid of the patch
+
+Bite the bullet and submit the patch to PostgreSQL, to add the t_cid to the WAL records. It makes the WAL records larger, which could make this unpopular in the PostgreSQL community. However, it might simplify some logical decoding code; Andres Freund briefly mentioned in PGCon 2022 discussion on Heikki's Neon presentation that logical decoding currently needs to jump through some hoops to reconstruct the same information.
+
+
+### Alternatives
+Perhaps we could write an extra WAL record with the t_cid information, when a page is evicted that contains rows that were touched a transaction that's still running. However, that seems very complicated.
+
+## ginfast.c
+
+```
+diff --git a/src/backend/access/gin/ginfast.c b/src/backend/access/gin/ginfast.c
+index e0d9940946..2d964c02e9 100644
+--- a/src/backend/access/gin/ginfast.c
++++ b/src/backend/access/gin/ginfast.c
+@@ -285,6 +285,17 @@ ginHeapTupleFastInsert(GinState *ginstate, GinTupleCollector *collector)
+                memset(&sublist, 0, sizeof(GinMetaPageData));
+                makeSublist(index, collector->tuples, collector->ntuples, &sublist);
+ 
++               if (metadata->head != InvalidBlockNumber)
++               {
++                       /*
++                        * ZENITH: Get buffer before XLogBeginInsert() to avoid recursive call
++                        * of XLogBeginInsert(). Reading a new buffer might evict a dirty page from
++                        * the buffer cache, and if that page happens to be an FSM or VM page, zenith_write()
++                        * will try to WAL-log an image of the page.
++                        */
++                       buffer = ReadBuffer(index, metadata->tail);
++               }
++
+                if (needWal)
+                        XLogBeginInsert();
+ 
+@@ -316,7 +327,6 @@ ginHeapTupleFastInsert(GinState *ginstate, GinTupleCollector *collector)
+                        data.prevTail = metadata->tail;
+                        data.newRightlink = sublist.head;
+ 
+-                       buffer = ReadBuffer(index, metadata->tail);
+                        LockBuffer(buffer, GIN_EXCLUSIVE);
+                        page = BufferGetPage(buffer);
+```
+
+The problem is explained in the comment above
+
+### How to get rid of the patch
+
+Can we stop WAL-logging FSM or VM pages? Or delay the WAL logging until we're out of the critical
+section or something.
+
+Maybe some bigger rewrite of FSM and VM would help to avoid WAL-logging FSM and VM page images?
+
+
+## Mark index builds that use buffer manager without logging explicitly
+
+```
+ src/backend/access/gin/gininsert.c                          |    7 +
+ src/backend/access/gist/gistbuild.c                         |   15 +-
+ src/backend/access/spgist/spginsert.c                       |    8 +-
+
+also some changes in src/backend/storage/smgr/smgr.c
+```
+
+When a GIN index is built, for example, it is built by inserting the entries into the index more or
+less normally, but without WAL-logging anything. After the index has been built, we iterate through
+all pages and write them to the WAL. That doesn't work for Neon, because if a page is not WAL-logged
+and is evicted from the buffer cache, it is lost. We have an check to catch that in the Neon
+extension. To fix that, we've added a few functions to track explicitly when we're performing such
+an operation: `smgr_start_unlogged_build`, `smgr_finish_unlogged_build_phase_1` and
+`smgr_end_unlogged_build`.
+
+
+### How to get rid of the patch
+
+I think it would make sense to be more explicit about that in PostgreSQL too. So extract these
+changes to a patch and post to pgsql-hackers.
+
+
+## Track last-written page LSN
+
+```
+ src/backend/commands/dbcommands.c                           |   17 +-
+
+Also one call to SetLastWrittenPageLSN() in spginsert.c, maybe elsewhere too
+```
+
+Whenever a page is evicted from the buffer cache, we remember its LSN, so that we can use the same
+LSN in the GetPage@LSN request when reading the page back from the page server. The value is
+conservative: it would be correct to always use the last-inserted LSN, but it would be slow because
+then the page server would need to wait for the recent WAL to be streamed and processed, before
+responding to any GetPage@LSN request.
+
+The last-written page LSN is mostly tracked in the smgrwrite() function, without core code changes,
+but there are a few exceptions where we've had to add explicit calls to the Neon-specific
+SetLastWrittenPageLSN() function.
+
+There's an open PR to track the LSN in a more-fine grained fashion:
+https://github.com/neondatabase/postgres/pull/177
+
+PostgreSQL v15 introduces a new method to do CREATE DATABASE that WAL-logs the database instead of
+relying copying files and checkpoint. With that method, we probably won't need any special handling.
+The old method is still available, though.
+
+### How to get rid of the patch
+
+Wait until v15?
+
+
+## Cache relation sizes
+
+The Neon extension contains a little cache for smgrnblocks() and smgrexists() calls, to avoid going
+to the page server every time. It might be useful to cache those in PostgreSQL, maybe in the
+relcache? (I think we do cache nblocks in relcache already, check why that's not good enough for
+Neon)
+
+
+## Use buffer manager when extending VM or FSM
+
+```
+ src/backend/storage/freespace/freespace.c                   |   14 +-
+ src/backend/access/heap/visibilitymap.c                     |   15 +-
+
+diff --git a/src/backend/access/heap/visibilitymap.c b/src/backend/access/heap/visibilitymap.c
+index e198df65d8..addfe93eac 100644
+--- a/src/backend/access/heap/visibilitymap.c
++++ b/src/backend/access/heap/visibilitymap.c
+@@ -652,10 +652,19 @@ vm_extend(Relation rel, BlockNumber vm_nblocks)
+        /* Now extend the file */
+        while (vm_nblocks_now < vm_nblocks)
+        {
+-               PageSetChecksumInplace((Page) pg.data, vm_nblocks_now);
++               /*
++                * ZENITH: Initialize VM pages through buffer cache to prevent loading
++                * them from pageserver.
++                */
++               Buffer  buffer = ReadBufferExtended(rel, VISIBILITYMAP_FORKNUM, P_NEW,
++                                                                                       RBM_ZERO_AND_LOCK, NULL);
++               Page    page = BufferGetPage(buffer);
++
++               PageInit((Page) page, BLCKSZ, 0);
++               PageSetChecksumInplace(page, vm_nblocks_now);
++               MarkBufferDirty(buffer);
++               UnlockReleaseBuffer(buffer);
+ 
+-               smgrextend(rel->rd_smgr, VISIBILITYMAP_FORKNUM, vm_nblocks_now,
+-                                  pg.data, false);
+                vm_nblocks_now++;
+        }
+```
+
+### Problem we're trying to solve
+
+???
+
+### How to get rid of the patch
+
+Maybe this would be a reasonable change in PostgreSQL too?
+
+
+## Allow startup without reading checkpoint record
+
+In Neon, the compute node is stateless. So when we are launching compute node, we need to provide
+some dummy PG_DATADIR. Relation pages can be requested on demand from page server. But Postgres
+still need some non-relational data: control and configuration files, SLRUs,...  It is currently
+implemented using basebackup (do not mix with pg_basebackup) which is created by pageserver. It
+includes in this tarball config/control files, SLRUs and required directories.
+
+As pageserver does not have the original WAL segments, the basebackup tarball includes an empty WAL
+segment to bootstrap the WAL writing, but it doesn't contain the checkpoint record.  There are some
+changes in xlog.c, to allow starting the compute node without reading the last checkpoint record
+from WAL.
+
+This includes code to read the `zenith.signal` file, which tells the startup code the LSN to start
+at. When the `zenith.signal` file is present, the startup uses that LSN instead of the last
+checkpoint's LSN. The system is known to be consistent at that LSN, without any WAL redo.
+
+
+### How to get rid of the patch
+
+???
+
+
+### Alternatives
+
+Include a fake checkpoint record in the tarball. Creating fake WAL is a bit risky, though; I'm
+afraid it might accidentally get streamed to the safekeepers and overwrite or corrupt the real WAL.
+
+## Disable sequence caching
+
+```
+diff --git a/src/backend/commands/sequence.c b/src/backend/commands/sequence.c
+index 0415df9ccb..9f9db3c8bc 100644
+--- a/src/backend/commands/sequence.c
++++ b/src/backend/commands/sequence.c
+@@ -53,7 +53,9 @@
+  * so we pre-log a few fetches in advance. In the event of
+  * crash we can lose (skip over) as many values as we pre-logged.
+  */
+-#define SEQ_LOG_VALS   32
++/* Zenith XXX: to ensure sequence order of sequence in Zenith we need to WAL log each sequence update. */
++/* #define SEQ_LOG_VALS        32 */
++#define SEQ_LOG_VALS   0
+```
+
+Due to performance reasons Postgres don't want to log each fetching of a value from a sequence, so
+it pre-logs a few fetches in advance. In the event of crash we can lose (skip over) as many values
+as we pre-logged. But with Neon, because page with sequence value can be evicted from buffer cache,
+we can get a gap in sequence values even without crash.
+
+### How to get rid of the patch
+
+Maybe we can just remove it, and accept the gaps. Or add some special handling for sequence
+relations in the Neon extension, to WAL log the sequence page when it's about to be evicted. It
+would be weird if the sequence moved backwards though, think of PITR.
+
+Or add a GUC for the amount to prefix to PostgreSQL, and force it to 1 in Neon.
+
+
+## Walproposer
+
+```
+ src/Makefile                                                |    1 +
+ src/backend/replication/libpqwalproposer/Makefile           |   37 +
+ src/backend/replication/libpqwalproposer/libpqwalproposer.c |  416 ++++++++++++
+ src/backend/postmaster/bgworker.c                           |    4 +
+ src/backend/postmaster/postmaster.c                         |    6 +
+ src/backend/replication/Makefile                            |    4 +-
+ src/backend/replication/walproposer.c                       | 2350 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ src/backend/replication/walproposer_utils.c                 |  402 +++++++++++
+ src/backend/replication/walreceiver.c                       |    7 +
+ src/backend/replication/walsender.c                         |  320 ++++++---
+ src/backend/storage/ipc/ipci.c                              |    6 +
+ src/include/replication/walproposer.h                       |  565 ++++++++++++++++
+```
+
+WAL proposer is communicating with safekeeper and ensures WAL durability by quorum writes.  It is
+currently implemented as patch to standard WAL sender.
+
+### How to get rid of the patch
+
+Refactor into an extension. Submit hooks or APIs into upstream if necessary.
+
+@MMeent did some work on this already: https://github.com/neondatabase/postgres/pull/96
+
+## Ignore unexpected data beyond EOF in bufmgr.c
+
+```
+@@ -922,11 +928,14 @@ ReadBuffer_common(SMgrRelation smgr, char relpersistence, ForkNumber forkNum,
+                 */
+                bufBlock = isLocalBuf ? LocalBufHdrGetBlock(bufHdr) : BufHdrGetBlock(bufHdr);
+                if (!PageIsNew((Page) bufBlock))
+-                       ereport(ERROR,
++               {
++                        // XXX-ZENITH
++                        MemSet((char *) bufBlock, 0, BLCKSZ);
++                        ereport(DEBUG1,
+                                        (errmsg("unexpected data beyond EOF in block %u of relation %s",
+                                                        blockNum, relpath(smgr->smgr_rnode, forkNum)),
+                                         errhint("This has been seen to occur with buggy kernels; consider updating your system.")));
+-
++               }
+                /*
+                 * We *must* do smgrextend before succeeding, else the page will not
+                 * be reserved by the kernel, and the next P_NEW call will decide to
+```
+
+PostgreSQL is a bit sloppy with extending relations. Usually, the relation is extended with zeros
+first, then the page is filled, and finally the new page WAL-logged. But if multiple backends extend
+a relation at the same time, the pages can be WAL-logged in different order.
+
+I'm not sure what scenario exactly required this change in Neon, though.
+
+### How to get rid of the patch
+
+Submit patches to pgsql-hackers, to tighten up the WAL-logging around relation extension. It's a bit
+confusing even in PostgreSQL. Maybe WAL log the intention to extend first, then extend the relation,
+and finally WAL-log that the extension succeeded.
+
+## Make smgr interface available to extensions
+
+```
+ src/backend/storage/smgr/smgr.c                             |  203 +++---
+ src/include/storage/smgr.h                                  |   72 +-
+```
+
+### How to get rid of the patch
+
+Submit to upstream. This could be useful for the Disk Encryption patches too, or for compression.
+
+
+## Added relpersistence argument to smgropen()
+
+```
+ src/backend/access/heap/heapam_handler.c                    |    2 +-
+ src/backend/catalog/storage.c                               |   10 +-
+ src/backend/commands/tablecmds.c                            |    2 +-
+ src/backend/storage/smgr/md.c                               |    4 +-
+ src/include/utils/rel.h                                     |    3 +-
+```
+
+Neon needs to treat unlogged relations differently from others, so the smgrread(), smgrwrite() etc.
+implementations need to know the 'relpersistence' of the relation. To get that information where
+it's needed, we added the 'relpersistence' field to smgropen().
+
+### How to get rid of the patch
+
+Maybe 'relpersistence' would be useful in PostgreSQL for debugging purposes? Or simply for the
+benefit of extensions like Neon. Should consider this in the patch to make smgr API usable to
+extensions.
+
+## Alternatives
+
+Currently in Neon, unlogged tables live on local disk in the compute node, and are wiped away on
+compute node restart. One alternative would be to instead WAL-log even unlogged tables, essentially
+ignoring the UNLOGGED option. Or prohibit UNLOGGED tables completely. But would we still need the
+relpersistence argument to handle index builds? See item on "Mark index builds that use buffer
+manager without logging explicitly".
+
+## Use smgr and dbsize_hook for size calculations
+
+```
+ src/backend/utils/adt/dbsize.c                              |   61 +-
+```
+
+In PostgreSQL, the rel and db-size functions scan the data directory directly. That won't work in Neon.
+
+### How to get rid of the patch
+
+Send patch to PostgreSQL, to use smgr API functions for relation size calculation instead. Maybe as
+part of the general smgr API patch.
+
+
+
+# WAL redo process changes
+
+Pageserver delegates complex WAL decoding duties to Postgres, which means that the latter might fall
+victim to carefully designed malicious WAL records and start doing harmful things to the system.  To
+prevent this, the redo functions are executed in a separate process that is sandboxed with Linux
+Secure Computing mode (see seccomp(2) man page).
+
+As an alternative to having a separate WAL redo process, we could rewrite all redo handlers in Rust
+This is infeasible. However, it would take a lot of effort to rewrite them, ensure that you've done
+the rewrite correctly, and once you've done that, it would be a lot of ongoing maintenance effort to
+keep the rewritten code in sync over time, across new PostgreSQL versions. That's why we want to
+leverage PostgreSQL code.
+
+Another alternative would be to harden all the PostgreSQL WAL redo functions so that it would be
+safe to call them directly from Rust code, without needing the security sandbox. That's not feasible
+for similar reasons as rewriting them in Rust.
+
+
+## Don't replay change in XLogReadBufferForRedo that are not for the target page we're replaying
+
+```
+ src/backend/access/gin/ginxlog.c                            |   19 +-
+
+Also some changes in xlog.c and xlogutils.c
+
+Example:
+
+@@ -415,21 +416,27 @@ ginRedoSplit(XLogReaderState *record)
+        if (!isLeaf)
+                ginRedoClearIncompleteSplit(record, 3);
+ 
+-       if (XLogReadBufferForRedo(record, 0, &lbuffer) != BLK_RESTORED)
++       action = XLogReadBufferForRedo(record, 0, &lbuffer);
++       if (action != BLK_RESTORED && action != BLK_DONE)
+                elog(ERROR, "GIN split record did not contain a full-page image of left page");
+```
+
+### Problem we're trying to solve
+
+In PostgreSQL, if a WAL redo function calls XLogReadBufferForRead() for a page that has a full-page
+image, it always succeeds. However, Neon WAL redo process is only concerned about replaying changes
+to a singe page, so replaying any changes for other pages is a waste of cycles. We have modified
+XLogReadBufferForRead() to return BLK_DONE for all other pages, to avoid the overhead. That is
+unexpected by code like the above.
+
+### How to get rid of the patch
+
+Submit the changes to upstream, hope the community accepts them. There's no harm to PostgreSQL from
+these changes, although it doesn't have any benefit either.
+
+To make these changes useful to upstream PostgreSQL, we could implement a feature to look ahead the
+WAL, and detect truncated relations. Even in PostgreSQL, it is a waste of cycles to replay changes
+to pages that are later truncated away, so we could have XLogReadBufferForRedo() return BLK_DONE or
+BLK_NOTFOUND for pages that are known to be truncated away later in the WAL stream.
+
+### Alternatives
+
+Maybe we could revert this optimization, and restore pages other than the target page too.
+
+## Add predefined_sysidentifier flag to initdb
+
+```
+ src/backend/bootstrap/bootstrap.c                           |   13 +-
+ src/bin/initdb/initdb.c                                     |    4 +
+
+And some changes in xlog.c
+```
+
+This is used to help with restoring a database when you have all the WAL, all the way back to
+initdb, but no backup. You can reconstruct the missing backup by running initdb again, with the same
+sysidentifier.
+
+
+### How to get rid of the patch
+
+Ignore it. This is only needed for disaster recovery, so once we've eliminated all other Postgres
+patches, we can just keep it around as a patch or as separate branch in a repo.
+
+
+# Not currently committed but proposed
+
+## Disable ring buffer buffer manager strategies
+
+### Why?
+
+Postgres tries to avoid cache flushing by bulk operations (copy, seqscan, vacuum,...).
+Even if there are free space in buffer cache, pages may be evicted.
+Negative effect of it can be somehow compensated by file system cache, but in Neon,
+cost of requesting page from page server is much higher.
+
+### Alternatives?
+
+Instead of just prohibiting ring buffer we may try to implement more flexible eviction policy,
+for example copy evicted page from ring buffer to some other buffer if there is free space
+in buffer cache.
+
+## Disable marking page as dirty when hint bits are set.
+
+### Why?
+
+Postgres has to modify page twice: first time when some tuple is updated and second time when
+hint bits are set. Wal logging hint bits updates requires FPI which significantly increase size of WAL.
+
+### Alternatives?
+
+Add special WAL record for setting page hints.
+
+## Prefetching
+
+### Why?
+
+As far as pages in Neon are loaded on demand, to reduce node startup time
+and also speedup some massive queries we need some mechanism for bulk loading to
+reduce page request round-trip overhead.
+
+Currently Postgres is supporting prefetching only for bitmap scan.
+In Neon we should also use prefetch for sequential and index scans, because the OS is not doing it for us.
+For sequential scan we could prefetch some number of following pages. For index scan we could prefetch pages
+of heap relation addressed by TIDs.
+
+## Prewarming
+
+### Why?
+
+Short downtime (or, in other words, fast compute node restart time) is one of the key feature of Zenith.
+But overhead of request-response round-trip for loading pages on demand can make started node warm-up quite slow.
+We can capture state of compute node buffer cache and send bulk request for this pages at startup.

docs/docker.md

@@ -0,0 +1,85 @@
+# Docker images of Neon
+
+## Images
+
+Currently we build two main images:
+
+- [neondatabase/neon](https://hub.docker.com/repository/docker/zenithdb/zenith) — image with pre-built `pageserver`, `safekeeper` and `proxy` binaries and all the required runtime dependencies. Built from [/Dockerfile](/Dockerfile).
+- [neondatabase/compute-node](https://hub.docker.com/repository/docker/zenithdb/compute-node) — compute node image with pre-built Postgres binaries from [neondatabase/postgres](https://github.com/neondatabase/postgres).
+
+And additional intermediate image:
+
+- [neondatabase/compute-tools](https://hub.docker.com/repository/docker/neondatabase/compute-tools) — compute node configuration management tools.
+
+## Building pipeline
+
+We build all images after a successful `release` tests run and push automatically to Docker Hub with two parallel CI jobs
+
+1. `neondatabase/compute-tools` and `neondatabase/compute-node`
+
+2. `neondatabase/neon`
+
+## Docker Compose example
+
+You can see a [docker compose](https://docs.docker.com/compose/) example to create a neon cluster in [/docker-compose/docker-compose.yml](/docker-compose/docker-compose.yml). It creates the following conatainers.
+
+- pageserver x 1
+- safekeeper x 3
+- storage_broker x 1
+- compute x 1
+- MinIO x 1        # This is Amazon S3 compatible object storage
+
+### How to use
+
+1. create containers
+
+You can specify version of neon cluster using following environment values.
+- PG_VERSION: postgres version for compute (default is 14)
+- TAG: the tag version of [docker image](https://registry.hub.docker.com/r/neondatabase/neon/tags) (default is latest), which is tagged in [CI test](/.github/workflows/build_and_test.yml)
+```
+$ cd docker-compose/
+$ docker-compose down   # remove the conainers if exists
+$ PG_VERSION=15 TAG=2937 docker-compose up --build -d  # You can specify the postgres and image version
+Creating network "dockercompose_default" with the default driver
+Creating docker-compose_storage_broker_1       ... done
+(...omit...)
+```
+
+2. connect compute node
+```
+$ echo "localhost:55433:postgres:cloud_admin:cloud_admin" >> ~/.pgpass
+$ chmod 600 ~/.pgpass
+$ psql -h localhost -p 55433 -U cloud_admin
+postgres=# CREATE TABLE t(key int primary key, value text);
+CREATE TABLE
+postgres=# insert into t values(1,1);
+INSERT 0 1
+postgres=# select * from t;
+ key | value
+-----+-------
+   1 | 1
+(1 row)
+```
+
+3. If you want to see the log, you can use `docker-compose logs` command.
+```
+# check the container name you want to see
+$ docker ps
+CONTAINER ID   IMAGE                                              COMMAND                  CREATED         STATUS         PORTS                                                                                                                                  NAMES
+d6968a5ae912   dockercompose_compute                              "/shell/compute.sh"      5 minutes ago   Up 5 minutes   0.0.0.0:3080->3080/tcp, 0.0.0.0:55433->55433/tcp                                                                                       dockercompose_compute_1
+(...omit...)
+
+$ docker logs -f dockercompose_compute_1
+2022-10-21 06:15:48.757 GMT [56] LOG:  connection authorized: user=cloud_admin database=postgres application_name=psql
+2022-10-21 06:17:00.307 GMT [56] LOG:  [NEON_SMGR] libpagestore: connected to 'host=pageserver port=6400'
+(...omit...)
+```
+
+4. If you want to see durable data in MinIO which is s3 compatible storage
+
+Access http://localhost:9001 and sign in.
+
+- Username: `minio`
+- Password: `password`
+
+You can see durable pages and WAL data in `neon` bucket.

docs/error-handling.md

@@ -0,0 +1,247 @@
+# Error handling and logging
+
+## Logging errors
+
+The principle is that errors are logged when they are handled. If you
+just propagate an error to the caller in a function, you don't need to
+log it; the caller will. But if you consume an error in a function,
+you *must* log it (if it needs to be logged at all).
+
+For example:
+
+```rust
+fn read_motd_file() -> std::io::Result<String> {
+    let mut f = File::open("/etc/motd")?;
+    let mut result = String::new();
+    f.read_to_string(&mut result)?;
+    result
+}
+```
+
+Opening or reading the file could fail, but there is no need to log
+the error here. The function merely propagates the error to the
+caller, and it is up to the caller to log the error or propagate it
+further, if the failure is not expected. But if, for example, it is
+normal that the "/etc/motd" file doesn't exist, the caller can choose
+to silently ignore the error, or log it as an INFO or DEBUG level
+message:
+
+```rust
+fn get_message_of_the_day() -> String {
+    // Get the motd from /etc/motd, or return the default proverb
+    match read_motd_file() {
+        Ok(motd) => motd,
+        Err(err)  => {
+            // It's normal that /etc/motd doesn't exist, but if we fail to
+            // read it for some other reason, that's unexpected. The message
+            // of the day isn't very important though, so we just WARN and
+            // continue with the default in any case.
+            if err.kind() != std::io::ErrorKind::NotFound {
+                 tracing::warn!("could not read \"/etc/motd\": {err:?}");
+            }
+            "An old error is always more popular than a new truth. - German proverb"
+        }
+    }
+}
+```
+
+## Error types
+
+We use the `anyhow` crate widely. It contains many convenient macros
+like `bail!` and `ensure!` to construct and return errors, and to
+propagate many kinds of low-level errors, wrapped in `anyhow::Error`.
+
+A downside of `anyhow::Error` is that the caller cannot distinguish
+between different error cases. Most errors are propagated all the way
+to the mgmt API handler function, or the main loop that handles a
+connection with the compute node, and they are all handled the same
+way: the error is logged and returned to the client as an HTTP or
+libpq error.
+
+But in some cases, we need to distinguish between errors and handle
+them differently. For example, attaching a tenant to the pageserver
+could fail either because the tenant has already been attached, or
+because we could not load its metadata from cloud storage. The first
+case is more or less expected. The console sends the Attach request to
+the pageserver, and the pageserver completes the operation, but the
+network connection might be lost before the console receives the
+response. The console will retry the operation in that case, but the
+tenant has already been attached. It is important that the pagserver
+responds with the HTTP 403 Already Exists error in that case, rather
+than a generic HTTP 500 Internal Server Error.
+
+If you need to distinguish between different kinds of errors, create a
+new `Error` type. The `thiserror` crate is useful for that. But in
+most cases `anyhow::Error` is good enough.
+
+## Panics
+
+Depending on where a panic happens, it can cause the whole pageserver
+or safekeeper to restart, or just a single tenant. In either case,
+that is pretty bad and causes an outage. Avoid panics. Never use
+`unwrap()` or other calls that might panic, to verify inputs from the
+network or from disk.
+
+It is acceptable to use functions that might panic, like `unwrap()`, if
+it is obvious that it cannot panic. For example, if you have just
+checked that a variable is not None, it is OK to call `unwrap()` on it,
+but it is still preferable to use `expect("reason")` instead to explain
+why the function cannot fail.
+
+`assert!` and `panic!` are reserved for checking clear invariants and
+very obvious "can't happen" cases. When in doubt, use anyhow `ensure!`
+or `bail!` instead.
+
+## Error levels
+
+`tracing::Level` doesn't provide very clear guidelines on what the
+different levels mean, or when to use which level. Here is how we use
+them:
+
+### Error
+
+Examples:
+- could not open file "foobar"
+- invalid tenant id
+
+Errors are not expected to happen during normal operation. Incorrect
+inputs from client can cause ERRORs. For example, if a client tries to
+call a mgmt API that doesn't exist, or if a compute node sends passes
+an LSN that has already been garbage collected away.
+
+These should *not* happen during normal operations. "Normal
+operations" is not a very precise concept. But for example, disk
+errors are not expected to happen when the system is working, so those
+count as Errors. However, if a TCP connection to a compute node is
+lost, that is not considered an Error, because it doesn't affect the
+pageserver's or safekeeper's operation in any way, and happens fairly
+frequently when compute nodes are shut down, or are killed abruptly
+because of errors in the compute.
+
+**Errors are monitored, and always need human investigation to determine
+the cause.**
+
+Whether something should be logged at ERROR, WARNING or INFO level can
+depend on the callers and clients. For example, it might be unexpected
+and a sign of a serious issue if the console calls the
+"timeline_detail" mgmt API for a timeline that doesn't exist. ERROR
+would be appropriate in that case. But if the console routinely calls
+the API after deleting a timeline, to check if the deletion has
+completed, then it would be totally normal and an INFO or DEBUG level
+message would be more appropriate. If a message is logged as an ERROR,
+but it in fact happens frequently in production and never requires any
+action, it should probably be demoted to an INFO level message.
+
+### Warn
+
+Examples:
+- could not remove temporary file "foobar.temp"
+- unrecognized file "foobar" in timeline directory
+
+Warnings are similar to Errors, in that they should not happen
+when the system is operating normally. The difference between Error and
+Warning is that an Error means that the operation failed, whereas Warning
+means that something unexpected happened, but the operation continued anyway.
+For example, if deleting a file fails because the file already didn't exist,
+it should be logged as Warning.
+
+> **Note:** The python regression tests, under `test_regress`, check the
+> pageserver log after each test for any ERROR and WARN lines. If there are
+> any ERRORs or WARNs that have not been explicitly listed in the test as
+> allowed, the test is marked a failed. This is to catch unexpected errors
+> e.g. in background operations, that don't cause immediate misbehaviour in
+> the tested functionality.
+
+### Info
+
+Info level is used to log useful information when the system is
+operating normally. Info level is appropriate e.g. for logging state
+changes, background operations, and network connections.
+
+Examples:
+- "system is shutting down"
+- "tenant was created"
+- "retrying S3 upload"
+
+### Debug & Trace
+
+Debug and Trace level messages are not printed to the log in our normal
+production configuration, but could be enabled for a specific server or
+tenant, to aid debugging. (Although we don't actually have that
+capability as of this writing).
+
+## Context
+
+We use logging "spans" to hold context information about the current
+operation. Almost every operation happens on a particular tenant and
+timeline, so we enter a span with the "tenant_id" and "timeline_id"
+very early when processing an incoming API request, for example. All
+background operations should also run in a span containing at least
+those two fields, and any other parameters or information that might
+be useful when debugging an error that might happen when performing
+the operation.
+
+TODO: Spans are not captured in the Error when it is created, but when
+the error is logged. It would be more useful to capture them at Error
+creation. We should consider using `tracing_error::SpanTrace` to do
+that.
+
+## Error message style
+
+### PostgreSQL extensions
+
+PostgreSQL has a style guide for writing error messages:
+
+https://www.postgresql.org/docs/current/error-style-guide.html
+
+Follow that guide when writing error messages in the PostgreSQL
+extensions.
+
+### Neon Rust code
+
+#### Anyhow Context
+
+When adding anyhow `context()`, use form `present-tense-verb+action`.
+
+Example:
+- Bad: `file.metadata().context("could not get file metadata")?;`
+- Good: `file.metadata().context("get file metadata")?;`
+
+#### Logging Errors
+
+When logging any error `e`, use `could not {e:#}` or `failed to {e:#}`.
+
+If `e` is an `anyhow` error and you want to log the backtrace that it contains,
+use `{e:?}` instead of `{e:#}`.
+
+#### Rationale
+
+The `{:#}` ("alternate Display") of an `anyhow` error chain is concatenation fo the contexts, using `: `.
+
+For example, the following Rust code will result in output
+```
+ERROR  failed to list users: load users from server: parse response: invalid json
+```
+
+This is more concise / less noisy than what happens if you do `.context("could not ...")?` at each level, i.e.:
+
+```
+ERROR  could not list users: could not load users from server: could not parse response: invalid json
+```
+
+
+```rust
+fn main() {
+  match list_users().context("list users") else {
+    Ok(_) => ...,
+    Err(e) => tracing::error!("failed to {e:#}"),
+  }
+}
+fn list_users() {
+  http_get_users().context("load users from server")?;
+}
+fn http_get_users() {
+  let response = client....?;
+  response.parse().context("parse response")?; // fails with serde error "invalid json"
+}
+```

docs/glossary.md

@@ -0,0 +1,273 @@
+# Glossary
+
+### Authentication
+
+### Backpressure
+
+Backpressure is used to limit the lag between pageserver and compute node or WAL service.
+
+If compute node or WAL service run far ahead of Page Server,
+the time of serving page requests increases. This may lead to timeout errors.
+
+To tune backpressure limits use `max_replication_write_lag`, `max_replication_flush_lag` and `max_replication_apply_lag` settings.
+When lag between current LSN (pg_current_wal_flush_lsn() at compute node) and minimal write/flush/apply position of replica exceeds the limit
+backends performing writes are blocked until the replica is caught up.
+### Base image (page image)
+
+### Basebackup
+
+A tarball with files needed to bootstrap a compute node[] and a corresponding command to create it.
+NOTE:It has nothing to do with PostgreSQL pg_basebackup.
+
+### Branch
+
+We can create branch at certain LSN using `neon_local timeline branch` command.
+Each Branch lives in a corresponding timeline[] and has an ancestor[].
+
+
+### Checkpoint (PostgreSQL)
+
+NOTE: This is an overloaded term.
+
+A checkpoint record in the WAL marks a point in the WAL sequence at which it is guaranteed that all data files have been updated with all information from shared memory modified before that checkpoint;
+
+### Checkpoint (Layered repository)
+
+NOTE: This is an overloaded term.
+
+Whenever enough WAL has been accumulated in memory, the page server []
+writes out the changes from the in-memory layer into a new delta layer file. This process
+is called "checkpointing".
+
+Configuration parameter `checkpoint_distance` defines the distance
+from current LSN to perform checkpoint of in-memory layers.
+Default is `DEFAULT_CHECKPOINT_DISTANCE`.
+
+### Compaction
+
+A background operation on layer files. Compaction takes a number of L0
+layer files, each of which covers the whole key space and a range of
+LSN, and reshuffles the data in them into L1 files so that each file
+covers the whole LSN range, but only part of the key space.
+
+Compaction should also opportunistically leave obsolete page versions
+from the L1 files, and materialize other page versions for faster
+access. That hasn't been implemented as of this writing, though.
+
+
+### Compute node
+
+Stateless Postgres node that stores data in pageserver.
+
+### Garbage collection
+
+The process of removing old on-disk layers that are not needed by any timeline anymore.
+
+### Fork
+
+Each of the separate segmented file sets in which a relation is stored. The main fork is where the actual data resides. There also exist two secondary forks for metadata: the free space map and the visibility map.
+
+### Layer
+
+A layer contains data needed to reconstruct any page versions within the
+layer's Segment and range of LSNs.
+
+There are two kinds of layers, in-memory and on-disk layers. In-memory
+layers are used to ingest incoming WAL, and provide fast access
+to the recent page versions. On-disk layers are stored as files on disk, and
+are immutable. See [pageserver-storage.md](./pageserver-storage.md) for more.
+
+### Layer file (on-disk layer)
+
+Layered repository on-disk format is based on immutable files.  The
+files are called "layer files". There are two kinds of layer files:
+image files and delta files. An image file contains a "snapshot" of a
+range of keys at a particular LSN, and a delta file contains WAL
+records applicable to a range of keys, in a range of LSNs.
+
+### Layer map
+
+The layer map tracks what layers exist in a timeline.
+
+### Layered repository
+
+Neon repository implementation that keeps data in layers.
+
+### LSN
+
+The Log Sequence Number (LSN) is a unique identifier of the WAL record[] in the WAL log.
+The insert position is a byte offset into the logs, increasing monotonically with each new record.
+Internally, an LSN is a 64-bit integer, representing a byte position in the write-ahead log stream.
+It is printed as two hexadecimal numbers of up to 8 digits each, separated by a slash.
+Check also [PostgreSQL doc about pg_lsn type](https://www.postgresql.org/docs/devel/datatype-pg-lsn.html)
+Values can be compared to calculate the volume of WAL data that separates them, so they are used to measure the progress of replication and recovery.
+
+In Postgres and Neon LSNs are used to describe certain points in WAL handling.
+
+PostgreSQL LSNs and functions to monitor them:
+* `pg_current_wal_insert_lsn()` - Returns the current write-ahead log insert location.
+* `pg_current_wal_lsn()` - Returns the current write-ahead log write location.
+* `pg_current_wal_flush_lsn()` - Returns the current write-ahead log flush location.
+* `pg_last_wal_receive_lsn()` - Returns the last write-ahead log location that has been received and synced to disk by streaming replication. While streaming replication is in progress this will increase monotonically.
+* `pg_last_wal_replay_lsn ()` - Returns the last write-ahead log location that has been replayed during recovery. If recovery is still in progress this will increase monotonically.
+[source PostgreSQL documentation](https://www.postgresql.org/docs/devel/functions-admin.html):
+
+Neon safekeeper LSNs. See [safekeeper protocol section](safekeeper-protocol.md) for more information.
+* `CommitLSN`: position in WAL confirmed by quorum safekeepers.
+* `RestartLSN`: position in WAL confirmed by all safekeepers.
+* `FlushLSN`: part of WAL persisted to the disk by safekeeper.
+* `VCL`: the largest LSN for which we can guarantee availability of all prior records.
+
+Neon pageserver LSNs:
+* `last_record_lsn` - the end of last processed WAL record.
+* `disk_consistent_lsn` - data is known to be fully flushed and fsync'd to local disk on pageserver up to this LSN.
+* `remote_consistent_lsn` - The last LSN that is synced to remote storage and is guaranteed to survive pageserver crash.
+TODO: use this name consistently in remote storage code. Now `disk_consistent_lsn` is used and meaning depends on the context.
+* `ancestor_lsn` - LSN of the branch point (the LSN at which this branch was created)
+
+TODO: add table that describes mapping between PostgreSQL (compute), safekeeper and pageserver LSNs.
+
+### Logical size
+
+The pageserver tracks the "logical size" of a timeline. It is the
+total size of all relations in all Postgres databases on the
+timeline. It includes all user and system tables, including their FSM
+and VM forks. But it does not include SLRUs, twophase files or any
+other such data or metadata that lives outside relations.
+
+The logical size is calculated by the pageserver, and is sent to
+PostgreSQL via feedback messages to the safekeepers. PostgreSQL uses
+the logical size to enforce the size limit in the free tier. The
+logical size is also shown to users in the web console.
+
+The logical size is not affected by branches or the physical layout of
+layer files in the pageserver. If you have a database with 1 GB
+logical size and you create a branch of it, both branches will have 1
+GB logical size, even though the branch is copy-on-write and won't
+consume any extra physical disk space until you make changes to it.
+
+### Page (block)
+
+The basic structure used to store relation data. All pages are of the same size.
+This is the unit of data exchange between compute node and pageserver.
+
+### Pageserver
+
+Neon storage engine: repositories + wal receiver + page service + wal redo.
+
+### Page service
+
+The Page Service listens for GetPage@LSN requests from the Compute Nodes,
+and responds with pages from the repository.
+
+
+### PITR (Point-in-time-recovery)
+
+PostgreSQL's ability to restore up to a specified LSN.
+
+### Primary node
+
+
+### Proxy
+
+Postgres protocol proxy/router.
+This service listens psql port, can check auth via external service
+and create new databases and accounts (control plane API in our case).
+
+### Relation
+
+The generic term in PostgreSQL for all objects in a database that have a name and a list of attributes defined in a specific order.
+
+### Replication slot
+
+
+### Replica node
+
+
+### Repository
+
+Repository stores multiple timelines, forked off from the same initial call to 'initdb'
+and has associated WAL redo service.
+One repository corresponds to one Tenant.
+
+### Retention policy
+
+How much history do we need to keep around for PITR and read-only nodes?
+
+### Segment
+
+A physical file that stores data for a given relation. File segments are
+limited in size by a compile-time setting (1 gigabyte by default), so if a
+relation exceeds that size, it is split into multiple segments.
+
+### SLRU
+
+SLRUs include pg_clog, pg_multixact/members, and
+pg_multixact/offsets. There are other SLRUs in PostgreSQL, but
+they don't need to be stored permanently (e.g. pg_subtrans),
+or we do not support them in neon yet (pg_commit_ts).
+
+### Tenant (Multitenancy)
+Tenant represents a single customer, interacting with Neon.
+Wal redo[] activity, timelines[], layers[] are managed for each tenant independently.
+One pageserver[] can serve multiple tenants at once.
+One safekeeper
+
+See `docs/multitenancy.md` for more.
+
+### Timeline
+
+Timeline accepts page changes and serves get_page_at_lsn() and
+get_rel_size() requests. The term "timeline" is used internally
+in the system, but to users they are exposed as "branches", with
+human-friendly names.
+
+NOTE: this has nothing to do with PostgreSQL WAL timelines.
+
+### XLOG
+
+PostgreSQL alias for WAL[].
+
+### WAL (Write-ahead log)
+
+The journal that keeps track of the changes in the database cluster as user- and system-invoked operations take place. It comprises many individual WAL records[] written sequentially to WAL files[].
+
+### WAL acceptor, WAL proposer
+
+In the context of the consensus algorithm, the Postgres
+compute node is also known as the WAL proposer, and the safekeeper is also known
+as the acceptor. Those are the standard terms in the Paxos algorithm.
+
+### WAL receiver (WAL decoder)
+
+The WAL receiver connects to the external WAL safekeeping service (or
+directly to the primary) using PostgreSQL physical streaming
+replication, and continuously receives WAL. It decodes the WAL records,
+and stores them to the repository.
+
+We keep one WAL receiver active per timeline.
+
+### WAL record
+
+A low-level description of an individual data change.
+
+### WAL redo
+
+A service that runs PostgreSQL in a special wal_redo mode
+to apply given WAL records over an old page image and return new page image.
+
+### WAL safekeeper
+
+One node that participates in the quorum. All the safekeepers
+together form the WAL service.
+
+### WAL segment (WAL file)
+
+Also known as WAL segment or WAL segment file. Each of the sequentially-numbered files that provide storage space for WAL. The files are all of the same predefined size and are written in sequential order, interspersing changes as they occur in multiple simultaneous sessions.
+
+### WAL service
+
+The service as whole that ensures that WAL is stored durably.
+
+### Web console
+

docs/multitenancy.md

@@ -0,0 +1,59 @@
+## Multitenancy
+
+### Overview
+
+Neon supports multitenancy. One pageserver can serve multiple tenants at once. Tenants can be managed via neon_local CLI. During page server setup tenant can be created using ```neon_local init --create-tenant``` Also tenants can be added into the system on the fly without pageserver restart. This can be done using the following cli command: ```neon_local tenant create``` Tenants use random identifiers which can be represented as a 32 symbols hexadecimal string. So neon_local tenant create accepts desired tenant id as an optional argument. The concept of timelines/branches is working independently per tenant.
+
+### Tenants in other commands
+
+By default during `neon_local init` new tenant is created on the pageserver. Newly created tenant's id is saved to cli config, so other commands can use it automatically if no direct argument `--tenant_id=<tenant_id>` is provided. So generally tenant_id more frequently appears in internal pageserver interface. Its commands take tenant_id argument to distinguish to which tenant operation should be applied. CLI support creation of new tenants.
+
+Examples for cli:
+
+```sh
+neon_local tenant list
+
+neon_local tenant create // generates new id
+
+neon_local tenant create ee6016ec31116c1b7c33dfdfca38892f
+
+neon_local pg create main // default tenant from neon init
+
+neon_local pg create main --tenant_id=ee6016ec31116c1b7c33dfdfca38892f
+
+neon_local branch --tenant_id=ee6016ec31116c1b7c33dfdfca38892f
+```
+
+### Data layout
+
+On the page server tenants introduce one level of indirection, so data directory structured the following way:
+```
+<pageserver working directory>
+├── pageserver.log
+├── pageserver.pid
+├── pageserver.toml
+└── tenants
+   ├── 537cffa58a4fa557e49e19951b5a9d6b
+   ├── de182bc61fb11a5a6b390a8aed3a804a
+   └── ee6016ec31116c1b7c33dfdfca38891f
+```
+Wal redo activity and timelines are managed for each tenant independently.
+
+For local environment used for example in tests there also new level of indirection for tenants. It touches `pgdatadirs` directory. Now it contains `tenants` subdirectory so the structure looks the following way:
+
+```
+pgdatadirs
+└── tenants
+   ├── de182bc61fb11a5a6b390a8aed3a804a
+   │  └── main
+   └── ee6016ec31116c1b7c33dfdfca38892f
+      └── main
+```
+
+### Changes to postgres
+
+Tenant id is passed to postgres via GUC the same way as the timeline. Tenant id is added to commands issued to pageserver, namely: pagestream, callmemaybe. Tenant id is also exists in ServerInfo structure, this is needed to pass the value to wal receiver to be able to forward it to the pageserver.
+
+### Safety
+
+For now particular tenant can only appear on a particular pageserver. Set of safekeepers are also pinned to particular (tenant_id, timeline_id) pair so there can only be one writer for particular (tenant_id, timeline_id).